[UTC 2019-3-4 15:23:31] 15:23:31 Received message from Master: op=Log open serial=110281 15:23:31 Log file open: Observatory C:\PKZPrograms\Logs\20190303 \ PKZ20190304152331_Observatory.txt 15:23:31 Previous log file: 15:23:35 Received message from Master: op=Log directory change serial=110283 15:23:35 Log file directory changed from C:\PKZPrograms\Logs\20190303 to C:\PKZPrograms\Logs\20190304 15:23:35 Log file name is PKZ20190304152335_Observatory.txt [UTC 2019-3-4 15:23:50] 15:33:35 No messages received for 10 min. 4411 sent since last one of these. 15:33:35 MsgArea H: nextMessageSerial=110291 startMsgs=68 nextFree=63444 maxMsg=65468 15:33:35 MsgArea Q: Master=-1:-1 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 15:33:35 MsgArea S: 15:33:38 Received message from Master: op=Identify serial=110291 15:43:38 No messages received for 10 min. 1 sent since last one of these. 15:43:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 15:43:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 15:43:38 MsgArea S: [UTC 2019-3-4 15:43:50] 15:53:38 No messages received for 10 min. 0 sent since last one of these. 15:53:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 15:53:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 15:53:38 MsgArea S: 16:03:38 No messages received for 10 min. 0 sent since last one of these. 16:03:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 16:03:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:03:38 MsgArea S: [UTC 2019-3-4 16:03:50] 16:13:38 No messages received for 10 min. 0 sent since last one of these. 16:13:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 16:13:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:13:38 MsgArea S: 16:23:38 No messages received for 10 min. 0 sent since last one of these. 16:23:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 16:23:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:23:38 MsgArea S: [UTC 2019-3-4 16:23:50] 16:33:38 No messages received for 10 min. 0 sent since last one of these. 16:33:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 16:33:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:33:38 MsgArea S: 16:43:38 No messages received for 10 min. 0 sent since last one of these. 16:43:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 16:43:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:43:38 MsgArea S: [UTC 2019-3-4 16:43:50] 16:53:38 No messages received for 10 min. 0 sent since last one of these. 16:53:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 16:53:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:53:38 MsgArea S: 17:03:38 No messages received for 10 min. 0 sent since last one of these. 17:03:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 17:03:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:03:38 MsgArea S: [UTC 2019-3-4 17:03:50] 17:13:38 No messages received for 10 min. 0 sent since last one of these. 17:13:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 17:13:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:13:38 MsgArea S: 17:23:38 No messages received for 10 min. 0 sent since last one of these. 17:23:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 17:23:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:23:38 MsgArea S: [UTC 2019-3-4 17:23:50] 17:33:38 No messages received for 10 min. 0 sent since last one of these. 17:33:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 17:33:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:33:38 MsgArea S: 17:43:38 No messages received for 10 min. 0 sent since last one of these. 17:43:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 17:43:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:43:38 MsgArea S: [UTC 2019-3-4 17:43:50] 17:53:38 No messages received for 10 min. 0 sent since last one of these. 17:53:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 17:53:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:53:38 MsgArea S: 18:03:38 No messages received for 10 min. 0 sent since last one of these. 18:03:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 18:03:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:03:38 MsgArea S: [UTC 2019-3-4 18:03:50] 18:13:38 No messages received for 10 min. 0 sent since last one of these. 18:13:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 18:13:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:13:38 MsgArea S: 18:23:38 No messages received for 10 min. 0 sent since last one of these. 18:23:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 18:23:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:23:38 MsgArea S: [UTC 2019-3-4 18:23:50] 18:33:38 No messages received for 10 min. 0 sent since last one of these. 18:33:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 18:33:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:33:38 MsgArea S: 18:43:38 No messages received for 10 min. 0 sent since last one of these. 18:43:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 18:43:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:43:38 MsgArea S: [UTC 2019-3-4 18:43:50] 18:53:38 No messages received for 10 min. 0 sent since last one of these. 18:53:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 18:53:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:53:38 MsgArea S: 19:03:38 No messages received for 10 min. 0 sent since last one of these. 19:03:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 19:03:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:03:38 MsgArea S: [UTC 2019-3-4 19:03:50] 19:13:38 No messages received for 10 min. 0 sent since last one of these. 19:13:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 19:13:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:13:38 MsgArea S: 19:23:38 No messages received for 10 min. 0 sent since last one of these. 19:23:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 19:23:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:23:38 MsgArea S: [UTC 2019-3-4 19:23:50] 19:33:38 No messages received for 10 min. 0 sent since last one of these. 19:33:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 19:33:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:33:38 MsgArea S: 19:43:38 No messages received for 10 min. 0 sent since last one of these. 19:43:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 19:43:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:43:38 MsgArea S: [UTC 2019-3-4 19:43:50] 19:53:38 No messages received for 10 min. 0 sent since last one of these. 19:53:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 19:53:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:53:38 MsgArea S: 20:03:38 No messages received for 10 min. 0 sent since last one of these. 20:03:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 20:03:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:03:38 MsgArea S: [UTC 2019-3-4 20:03:50] 20:13:38 No messages received for 10 min. 0 sent since last one of these. 20:13:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 20:13:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:13:38 MsgArea S: 20:23:38 No messages received for 10 min. 0 sent since last one of these. 20:23:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 20:23:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:23:38 MsgArea S: [UTC 2019-3-4 20:23:50] 20:33:38 No messages received for 10 min. 0 sent since last one of these. 20:33:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 20:33:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:33:38 MsgArea S: 20:43:38 No messages received for 10 min. 0 sent since last one of these. 20:43:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 20:43:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:43:38 MsgArea S: [UTC 2019-3-4 20:43:50] 20:53:38 No messages received for 10 min. 0 sent since last one of these. 20:53:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 20:53:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:53:38 MsgArea S: 21:03:38 No messages received for 10 min. 0 sent since last one of these. 21:03:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 21:03:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:03:38 MsgArea S: [UTC 2019-3-4 21:03:50] 21:13:38 No messages received for 10 min. 0 sent since last one of these. 21:13:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 21:13:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:13:38 MsgArea S: 21:23:38 No messages received for 10 min. 0 sent since last one of these. 21:23:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 21:23:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:23:38 MsgArea S: [UTC 2019-3-4 21:23:50] 21:33:38 No messages received for 10 min. 0 sent since last one of these. 21:33:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 21:33:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:33:38 MsgArea S: 21:43:38 No messages received for 10 min. 0 sent since last one of these. 21:43:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 21:43:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:43:38 MsgArea S: [UTC 2019-3-4 21:43:50] 21:53:38 No messages received for 10 min. 0 sent since last one of these. 21:53:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 21:53:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:53:38 MsgArea S: 22:03:38 No messages received for 10 min. 0 sent since last one of these. 22:03:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 22:03:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:03:38 MsgArea S: [UTC 2019-3-4 22:03:50] 22:13:38 No messages received for 10 min. 0 sent since last one of these. 22:13:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 22:13:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:13:38 MsgArea S: 22:23:38 No messages received for 10 min. 0 sent since last one of these. 22:23:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 22:23:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:23:38 MsgArea S: [UTC 2019-3-4 22:23:50] 22:33:38 No messages received for 10 min. 0 sent since last one of these. 22:33:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 22:33:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:33:38 MsgArea S: 22:43:38 No messages received for 10 min. 0 sent since last one of these. 22:43:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 22:43:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:43:38 MsgArea S: [UTC 2019-3-4 22:43:50] 22:53:38 No messages received for 10 min. 0 sent since last one of these. 22:53:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 22:53:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:53:38 MsgArea S: 23:03:38 No messages received for 10 min. 0 sent since last one of these. 23:03:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 23:03:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:03:38 MsgArea S: [UTC 2019-3-4 23:03:50] 23:13:38 No messages received for 10 min. 0 sent since last one of these. 23:13:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 23:13:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:13:38 MsgArea S: 23:23:38 No messages received for 10 min. 0 sent since last one of these. 23:23:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 23:23:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:23:38 MsgArea S: [UTC 2019-3-4 23:23:50] 23:33:38 No messages received for 10 min. 0 sent since last one of these. 23:33:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 23:33:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:33:38 MsgArea S: 23:43:38 No messages received for 10 min. 0 sent since last one of these. 23:43:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 23:43:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:43:38 MsgArea S: [UTC 2019-3-4 23:43:50] 23:53:38 No messages received for 10 min. 0 sent since last one of these. 23:53:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 23:53:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:53:38 MsgArea S: 00:03:38 No messages received for 10 min. 0 sent since last one of these. 00:03:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 00:03:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:03:38 MsgArea S: [UTC 2019-3-5 00:03:50] 00:13:38 No messages received for 10 min. 0 sent since last one of these. 00:13:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 00:13:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:13:38 MsgArea S: 00:23:38 No messages received for 10 min. 0 sent since last one of these. 00:23:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 00:23:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:23:38 MsgArea S: [UTC 2019-3-5 00:23:50] 00:33:38 No messages received for 10 min. 0 sent since last one of these. 00:33:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 00:33:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:33:38 MsgArea S: 00:43:38 No messages received for 10 min. 0 sent since last one of these. 00:43:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 00:43:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:43:38 MsgArea S: [UTC 2019-3-5 00:43:50] 00:53:38 No messages received for 10 min. 0 sent since last one of these. 00:53:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 00:53:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:53:38 MsgArea S: 01:03:38 No messages received for 10 min. 0 sent since last one of these. 01:03:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 01:03:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:03:38 MsgArea S: [UTC 2019-3-5 01:03:50] 01:13:38 No messages received for 10 min. 0 sent since last one of these. 01:13:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 01:13:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:13:38 MsgArea S: 01:23:38 No messages received for 10 min. 0 sent since last one of these. 01:23:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 01:23:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:23:38 MsgArea S: [UTC 2019-3-5 01:23:50] 01:33:38 No messages received for 10 min. 0 sent since last one of these. 01:33:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 01:33:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:33:38 MsgArea S: 01:43:38 No messages received for 10 min. 0 sent since last one of these. 01:43:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 01:43:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:43:38 MsgArea S: [UTC 2019-3-5 01:43:50] 01:53:38 No messages received for 10 min. 0 sent since last one of these. 01:53:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 01:53:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:53:38 MsgArea S: 02:03:38 No messages received for 10 min. 0 sent since last one of these. 02:03:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 02:03:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:03:38 MsgArea S: [UTC 2019-3-5 02:03:50] 02:13:38 No messages received for 10 min. 0 sent since last one of these. 02:13:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 02:13:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:13:38 MsgArea S: 02:23:38 No messages received for 10 min. 0 sent since last one of these. 02:23:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 02:23:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:23:38 MsgArea S: [UTC 2019-3-5 02:23:50] 02:33:38 No messages received for 10 min. 0 sent since last one of these. 02:33:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 02:33:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:33:38 MsgArea S: 02:43:38 No messages received for 10 min. 0 sent since last one of these. 02:43:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 02:43:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:43:38 MsgArea S: [UTC 2019-3-5 02:43:50] 02:53:38 No messages received for 10 min. 0 sent since last one of these. 02:53:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 02:53:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:53:38 MsgArea S: 03:03:38 No messages received for 10 min. 0 sent since last one of these. 03:03:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 03:03:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 03:03:38 MsgArea S: [UTC 2019-3-5 03:03:50] 03:13:38 No messages received for 10 min. 0 sent since last one of these. 03:13:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 03:13:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 03:13:38 MsgArea S: 03:23:38 No messages received for 10 min. 0 sent since last one of these. 03:23:38 MsgArea H: nextMessageSerial=110294 startMsgs=68 nextFree=64668 maxMsg=65468 03:23:38 MsgArea Q: Master=64056:64464 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 03:23:38 MsgArea S: [UTC 2019-3-5 03:23:50] 03:24:34 Received message from Master: op=PointingHead serial=110295 03:24:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:24:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:24:35 Point started: ret=0 03:24:35 point_skyscan result=0 03:24:35 Check angles 03:24:35 SkyScan query 03:24:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:24:36 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:24:36 Message to Master queued w/err=0: serial=110295 error=0 03:24:41 Received message from Master: op=Filter serial=110296 03:24:41 Color wheel filter change from 2 to 2 03:24:41 FLIGetFilterPos err=0 currentPosition=2 03:24:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:24:41 Filter is already there-color wheel unchanged 03:24:41 Received message from Master: op=Shutter serial=110297 03:24:41 Shutter LASER close 03:24:43 Received message from Camera: op=State serial=110299 03:24:43 GetSingleValue result=40 Value=cccccccc 03:24:43 SkyScan query 03:24:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:24:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:43 Parameters OK 03:24:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:43 Set A/D data flow result=40 03:24:43 Set A/D channel type result=40 03:24:43 Set A/D encoding result=40 03:24:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:43 Set channel filter=0.000000e+000 result=40 03:24:43 Config A/D Result=40 03:24:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:43 Get A/D filter: -9.255963e+061 result=40 03:24:43 Get A/D value=-858993460 result=40 03:24:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:43 Parameters OK 03:24:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:43 Set A/D data flow result=40 03:24:43 Set A/D channel type result=40 03:24:43 Set A/D encoding result=40 03:24:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:43 Set channel filter=0.000000e+000 result=40 03:24:43 Config A/D Result=40 03:24:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:43 Get A/D filter: -9.255963e+061 result=40 03:24:43 Get A/D value=-858993460 result=40 03:24:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:24:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:24:43 Aux= 03:24:43 Message to Camera, serial 110299 queued 03:24:49 Received message from Master: op=PointingHead serial=110310 03:24:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:24:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:24:49 Point started: ret=0 03:24:49 point_skyscan result=0 03:24:50 Check angles 03:24:50 SkyScan query 03:24:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:24:51 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:24:51 Message to Master queued w/err=0: serial=110310 error=0 03:24:56 Received message from Master: op=Filter serial=110311 03:24:56 Color wheel filter change from 2 to 2 03:24:56 FLIGetFilterPos err=0 currentPosition=2 03:24:56 FLIGetStepsRemaining err=0 RemainingSteps=0 03:24:56 Filter is already there-color wheel unchanged 03:24:56 Received message from Master: op=Shutter serial=110312 03:24:56 Shutter LASER close 03:24:56 Received message from Camera: op=State serial=110314 03:24:56 GetSingleValue result=40 Value=cccccccc 03:24:56 SkyScan query 03:24:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:24:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:57 Parameters OK 03:24:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:57 Set A/D data flow result=40 03:24:57 Set A/D channel type result=40 03:24:57 Set A/D encoding result=40 03:24:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:57 Set channel filter=0.000000e+000 result=40 03:24:57 Config A/D Result=40 03:24:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:57 Get A/D filter: -9.255963e+061 result=40 03:24:57 Get A/D value=-858993460 result=40 03:24:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:57 Parameters OK 03:24:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:57 Set A/D data flow result=40 03:24:57 Set A/D channel type result=40 03:24:57 Set A/D encoding result=40 03:24:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:57 Set channel filter=0.000000e+000 result=40 03:24:57 Config A/D Result=40 03:24:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:57 Get A/D filter: -9.255963e+061 result=40 03:24:57 Get A/D value=-858993460 result=40 03:24:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:24:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:24:57 Aux= 03:24:57 Message to Camera, serial 110314 queued 03:25:32 Received message from Master: op=PointingHead serial=110326 03:25:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:25:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:25:33 Point started: ret=0 03:25:33 point_skyscan result=0 03:25:33 Check angles 03:25:33 SkyScan query 03:25:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:25:34 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:25:34 Message to Master queued w/err=0: serial=110326 error=0 03:25:39 Received message from Master: op=Filter serial=110327 03:25:39 Color wheel filter change from 2 to 2 03:25:39 FLIGetFilterPos err=0 currentPosition=2 03:25:39 FLIGetStepsRemaining err=0 RemainingSteps=0 03:25:39 Filter is already there-color wheel unchanged 03:25:39 Received message from Master: op=Shutter serial=110328 03:25:39 Shutter LASER open 03:25:39 Received message from Camera: op=State serial=110330 03:25:39 GetSingleValue result=40 Value=cccccccc 03:25:39 SkyScan query 03:25:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:25:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:40 Parameters OK 03:25:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:40 Set A/D data flow result=40 03:25:40 Set A/D channel type result=40 03:25:40 Set A/D encoding result=40 03:25:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:40 Set channel filter=0.000000e+000 result=40 03:25:40 Config A/D Result=40 03:25:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:40 Get A/D filter: -9.255963e+061 result=40 03:25:40 Get A/D value=-858993460 result=40 03:25:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:40 Parameters OK 03:25:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:40 Set A/D data flow result=40 03:25:40 Set A/D channel type result=40 03:25:40 Set A/D encoding result=40 03:25:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:40 Set channel filter=0.000000e+000 result=40 03:25:40 Config A/D Result=40 03:25:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:40 Get A/D filter: -9.255963e+061 result=40 03:25:40 Get A/D value=-858993460 result=40 03:25:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:25:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:25:40 Aux= 03:25:40 Message to Camera, serial 110330 queued 03:25:48 Received message from Master: op=Shutter serial=110340 03:25:48 Shutter LASER close 03:25:49 Received message from Master: op=PointingHead serial=110344 03:25:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:25:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:25:49 Point started: ret=0 03:25:49 point_skyscan result=0 03:25:50 Check angles 03:25:50 SkyScan query 03:25:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:25:50 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:25:50 Message to Master queued w/err=0: serial=110344 error=0 03:25:55 Received message from Master: op=Filter serial=110345 03:25:55 Color wheel filter change from 2 to 2 03:25:55 FLIGetFilterPos err=0 currentPosition=2 03:25:55 FLIGetStepsRemaining err=0 RemainingSteps=0 03:25:55 Filter is already there-color wheel unchanged 03:25:56 Received message from Master: op=Shutter serial=110346 03:25:56 Shutter LASER close 03:25:56 Received message from Camera: op=State serial=110348 03:25:56 GetSingleValue result=40 Value=cccccccc 03:25:56 SkyScan query 03:25:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:25:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:56 Parameters OK 03:25:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:56 Set A/D data flow result=40 03:25:56 Set A/D channel type result=40 03:25:56 Set A/D encoding result=40 03:25:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:56 Set channel filter=0.000000e+000 result=40 03:25:56 Config A/D Result=40 03:25:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:56 Get A/D filter: -9.255963e+061 result=40 03:25:56 Get A/D value=-858993460 result=40 03:25:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:56 Parameters OK 03:25:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:56 Set A/D data flow result=40 03:25:56 Set A/D channel type result=40 03:25:56 Set A/D encoding result=40 03:25:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:56 Set channel filter=0.000000e+000 result=40 03:25:56 Config A/D Result=40 03:25:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:56 Get A/D filter: -9.255963e+061 result=40 03:25:56 Get A/D value=-858993460 result=40 03:25:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:25:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:25:56 Aux= 03:25:56 Message to Camera, serial 110348 queued 03:26:04 Received message from Master: op=PointingHead serial=110360 03:26:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:26:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:26:05 Point started: ret=0 03:26:05 point_skyscan result=0 03:26:05 Check angles 03:26:05 SkyScan query 03:26:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 03:26:06 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 03:26:06 Check angles 03:26:06 SkyScan query 03:26:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 03:26:07 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 03:26:07 Check angles 03:26:07 SkyScan query 03:26:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 03:26:08 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 03:26:08 Check angles 03:26:08 SkyScan query 03:26:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.74<-17316 Statuses=0008 0009 03:26:08 Msec=2250 True Az=112.995 Ze=-79.74 Az status=0008 Ze status=0009 03:26:08 Check angles 03:26:08 SkyScan query 03:26:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.77<-15918 Statuses=0008 0009 03:26:09 Msec=3000 True Az=112.995 Ze=-58.77 Az status=0008 Ze status=0009 03:26:09 Check angles 03:26:09 SkyScan query 03:26:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.815<-14521 Statuses=0008 0009 03:26:10 Msec=3750 True Az=112.995 Ze=-37.815 Az status=0008 Ze status=0009 03:26:10 Check angles 03:26:10 SkyScan query 03:26:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.86<-13124 Statuses=0008 0009 03:26:11 Msec=4500 True Az=112.995 Ze=-16.86 Az status=0008 Ze status=0009 03:26:11 Check angles 03:26:11 SkyScan query 03:26:11 SkyScan query done: ret=0 az=112.995<-7533 ze=4.08<-11728 Statuses=0008 0009 03:26:11 Msec=5250 True Az=112.995 Ze=4.08 Az status=0008 Ze status=0009 03:26:11 Check angles 03:26:11 SkyScan query 03:26:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:26:12 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:26:12 Message to Master queued w/err=0: serial=110360 error=0 03:26:17 Received message from Master: op=Filter serial=110361 03:26:17 Color wheel filter change from 2 to 0 03:26:17 FLIGetFilterPos err=0 currentPosition=2 03:26:17 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:23 FLISetFilterPos err=0 rqPosition=0 03:26:23 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:23 Check after 0.00 sec for filter wheel DIn/CWh=0 03:26:23 FLIGetFilterPos err=0 currentPosition=0 03:26:23 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:23 Received message from Master: op=Shutter serial=110362 03:26:23 Shutter LASER close 03:26:24 Received message from Camera: op=State serial=110364 03:26:24 GetSingleValue result=40 Value=cccccccc 03:26:24 SkyScan query 03:26:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:26:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:24 Parameters OK 03:26:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:24 Set A/D data flow result=40 03:26:24 Set A/D channel type result=40 03:26:24 Set A/D encoding result=40 03:26:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:24 Set channel filter=0.000000e+000 result=40 03:26:24 Config A/D Result=40 03:26:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:24 Get A/D filter: -9.255963e+061 result=40 03:26:24 Get A/D value=-858993460 result=40 03:26:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:24 Parameters OK 03:26:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:24 Set A/D data flow result=40 03:26:24 Set A/D channel type result=40 03:26:24 Set A/D encoding result=40 03:26:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:24 Set channel filter=0.000000e+000 result=40 03:26:24 Config A/D Result=40 03:26:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:24 Get A/D filter: -9.255963e+061 result=40 03:26:24 Get A/D value=-858993460 result=40 03:26:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:26:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:26:24 Aux= 03:26:24 Message to Camera, serial 110364 queued 03:27:01 Received message from Master: op=PointingHead serial=110377 03:27:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:27:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:27:01 Point started: ret=0 03:27:01 point_skyscan result=0 03:27:02 Check angles 03:27:02 SkyScan query 03:27:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:27:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:27:03 Message to Master queued w/err=0: serial=110377 error=0 03:27:08 Received message from Master: op=Filter serial=110378 03:27:08 Color wheel filter change from 0 to 0 03:27:08 FLIGetFilterPos err=0 currentPosition=0 03:27:08 FLIGetStepsRemaining err=0 RemainingSteps=0 03:27:08 Filter is already there-color wheel unchanged 03:27:08 Received message from Master: op=Shutter serial=110379 03:27:08 Shutter LASER close 03:27:08 Received message from Camera: op=State serial=110381 03:27:08 GetSingleValue result=40 Value=cccccccc 03:27:08 SkyScan query 03:27:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:27:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:08 Parameters OK 03:27:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:08 Set A/D data flow result=40 03:27:08 Set A/D channel type result=40 03:27:08 Set A/D encoding result=40 03:27:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:08 Set channel filter=0.000000e+000 result=40 03:27:08 Config A/D Result=40 03:27:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:08 Get A/D filter: -9.255963e+061 result=40 03:27:08 Get A/D value=-858993460 result=40 03:27:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:08 Parameters OK 03:27:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:08 Set A/D data flow result=40 03:27:08 Set A/D channel type result=40 03:27:08 Set A/D encoding result=40 03:27:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:08 Set channel filter=0.000000e+000 result=40 03:27:08 Config A/D Result=40 03:27:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:08 Get A/D filter: -9.255963e+061 result=40 03:27:08 Get A/D value=-858993460 result=40 03:27:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:27:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:27:08 Aux= 03:27:08 Message to Camera, serial 110381 queued 03:27:45 Received message from Master: op=PointingHead serial=110394 03:27:45 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:27:45 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:27:46 Point started: ret=0 03:27:46 point_skyscan result=0 03:27:46 Check angles 03:27:46 SkyScan query 03:27:47 SkyScan query done: ret=0 az=135.975<-9065 ze=-6.51<-12434 Statuses=0009 0008 03:27:47 Msec=0 True Az=135.975 Ze=-6.51 Az status=0009 Ze status=0008 03:27:47 Check angles 03:27:47 SkyScan query 03:27:48 SkyScan query done: ret=0 az=153.495<-10233 ze=-6.495<-12433 Statuses=0009 0008 03:27:48 Msec=750 True Az=153.495 Ze=-6.495 Az status=0009 Ze status=0008 03:27:48 Check angles 03:27:48 SkyScan query 03:27:48 SkyScan query done: ret=0 az=171.015<-11401 ze=-6.495<-12433 Statuses=0009 0008 03:27:48 Msec=1500 True Az=171.015 Ze=-6.495 Az status=0009 Ze status=0008 03:27:49 Check angles 03:27:49 SkyScan query 03:27:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:27:49 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 03:27:49 Message to Master queued w/err=0: serial=110394 error=0 03:27:54 Received message from Master: op=Filter serial=110395 03:27:54 Color wheel filter change from 0 to 0 03:27:54 FLIGetFilterPos err=0 currentPosition=0 03:27:54 FLIGetStepsRemaining err=0 RemainingSteps=0 03:27:54 Filter is already there-color wheel unchanged 03:27:54 Received message from Master: op=Shutter serial=110396 03:27:54 Shutter LASER close 03:27:54 Received message from Camera: op=State serial=110398 03:27:54 GetSingleValue result=40 Value=cccccccc 03:27:54 SkyScan query 03:27:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:27:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:55 Parameters OK 03:27:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:55 Set A/D data flow result=40 03:27:55 Set A/D channel type result=40 03:27:55 Set A/D encoding result=40 03:27:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:55 Set channel filter=0.000000e+000 result=40 03:27:55 Config A/D Result=40 03:27:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:55 Get A/D filter: -9.255963e+061 result=40 03:27:55 Get A/D value=-858993460 result=40 03:27:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:55 Parameters OK 03:27:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:55 Set A/D data flow result=40 03:27:55 Set A/D channel type result=40 03:27:55 Set A/D encoding result=40 03:27:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:55 Set channel filter=0.000000e+000 result=40 03:27:55 Config A/D Result=40 03:27:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:55 Get A/D filter: -9.255963e+061 result=40 03:27:55 Get A/D value=-858993460 result=40 03:27:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:27:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:27:55 Aux= 03:27:55 Message to Camera, serial 110398 queued 03:28:32 Received message from Master: op=PointingHead serial=110411 03:28:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:28:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:28:32 Point started: ret=0 03:28:32 point_skyscan result=0 03:28:33 Check angles 03:28:33 SkyScan query 03:28:33 SkyScan query done: ret=0 az=152.97<-10198 ze=6.51<-11566 Statuses=0009 0008 03:28:33 Msec=0 True Az=152.97 Ze=6.51 Az status=0009 Ze status=0008 03:28:34 Check angles 03:28:34 SkyScan query 03:28:34 SkyScan query done: ret=0 az=135.24<-9016 ze=6.495<-11567 Statuses=0009 0008 03:28:34 Msec=750 True Az=135.24 Ze=6.495 Az status=0009 Ze status=0008 03:28:34 Check angles 03:28:34 SkyScan query 03:28:35 SkyScan query done: ret=0 az=117.75<-7850 ze=6.495<-11567 Statuses=0009 0008 03:28:35 Msec=1500 True Az=117.75 Ze=6.495 Az status=0009 Ze status=0008 03:28:35 Check angles 03:28:35 SkyScan query 03:28:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:28:36 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:28:36 Message to Master queued w/err=0: serial=110411 error=0 03:28:41 Received message from Master: op=Filter serial=110412 03:28:41 Color wheel filter change from 0 to 0 03:28:41 FLIGetFilterPos err=0 currentPosition=0 03:28:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:28:41 Filter is already there-color wheel unchanged 03:28:41 Received message from Master: op=Shutter serial=110413 03:28:41 Shutter LASER close 03:28:41 Received message from Camera: op=State serial=110415 03:28:41 GetSingleValue result=40 Value=cccccccc 03:28:41 SkyScan query 03:28:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:28:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:42 Parameters OK 03:28:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:42 Set A/D data flow result=40 03:28:42 Set A/D channel type result=40 03:28:42 Set A/D encoding result=40 03:28:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:42 Set channel filter=0.000000e+000 result=40 03:28:42 Config A/D Result=40 03:28:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:42 Get A/D filter: -9.255963e+061 result=40 03:28:42 Get A/D value=-858993460 result=40 03:28:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:42 Parameters OK 03:28:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:42 Set A/D data flow result=40 03:28:42 Set A/D channel type result=40 03:28:42 Set A/D encoding result=40 03:28:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:42 Set channel filter=0.000000e+000 result=40 03:28:42 Config A/D Result=40 03:28:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:42 Get A/D filter: -9.255963e+061 result=40 03:28:42 Get A/D value=-858993460 result=40 03:28:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:28:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:28:42 Aux= 03:28:42 Message to Camera, serial 110415 queued 03:29:18 Received message from Master: op=PointingHead serial=110428 03:29:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:29:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:29:19 Point started: ret=0 03:29:19 point_skyscan result=0 03:29:19 Check angles 03:29:19 SkyScan query 03:29:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 03:29:20 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 03:29:20 Check angles 03:29:20 SkyScan query 03:29:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 03:29:21 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 03:29:21 Check angles 03:29:21 SkyScan query 03:29:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.475<-16365 Statuses=0008 0009 03:29:22 Msec=1500 True Az=112.995 Ze=-65.475 Az status=0008 Ze status=0009 03:29:22 Check angles 03:29:22 SkyScan query 03:29:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.445<-17763 Statuses=0008 0009 03:29:22 Msec=2250 True Az=112.995 Ze=-86.445 Az status=0008 Ze status=0009 03:29:22 Check angles 03:29:22 SkyScan query 03:29:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.385<-19159 Statuses=0008 0009 03:29:23 Msec=3000 True Az=112.995 Ze=-107.385 Az status=0008 Ze status=0009 03:29:23 Check angles 03:29:23 SkyScan query 03:29:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.325<-20555 Statuses=0008 0009 03:29:24 Msec=3750 True Az=112.995 Ze=-128.325 Az status=0008 Ze status=0009 03:29:24 Check angles 03:29:24 SkyScan query 03:29:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.295<-21953 Statuses=0008 0009 03:29:25 Msec=4500 True Az=112.995 Ze=-149.295 Az status=0008 Ze status=0009 03:29:25 Check angles 03:29:25 SkyScan query 03:29:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.25<-23350 Statuses=0008 0009 03:29:25 Msec=5250 True Az=112.995 Ze=-170.25 Az status=0008 Ze status=0009 03:29:25 Check angles 03:29:25 SkyScan query 03:29:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:29:26 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:29:26 Message to Master queued w/err=0: serial=110428 error=0 03:29:31 Received message from Master: op=Filter serial=110429 03:29:31 Color wheel filter change from 0 to 0 03:29:31 FLIGetFilterPos err=0 currentPosition=0 03:29:31 FLIGetStepsRemaining err=0 RemainingSteps=0 03:29:31 Filter is already there-color wheel unchanged 03:29:31 Received message from Master: op=Shutter serial=110430 03:29:31 Shutter LASER open 03:29:31 Received message from Camera: op=State serial=110432 03:29:31 GetSingleValue result=40 Value=cccccccc 03:29:31 SkyScan query 03:29:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:29:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:32 Parameters OK 03:29:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:32 Set A/D data flow result=40 03:29:32 Set A/D channel type result=40 03:29:32 Set A/D encoding result=40 03:29:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:32 Set channel filter=0.000000e+000 result=40 03:29:32 Config A/D Result=40 03:29:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:32 Get A/D filter: -9.255963e+061 result=40 03:29:32 Get A/D value=-858993460 result=40 03:29:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:32 Parameters OK 03:29:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:32 Set A/D data flow result=40 03:29:32 Set A/D channel type result=40 03:29:32 Set A/D encoding result=40 03:29:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:32 Set channel filter=0.000000e+000 result=40 03:29:32 Config A/D Result=40 03:29:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:32 Get A/D filter: -9.255963e+061 result=40 03:29:32 Get A/D value=-858993460 result=40 03:29:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:29:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:29:32 Aux= 03:29:32 Message to Camera, serial 110432 queued 03:29:40 Received message from Master: op=Shutter serial=110442 03:29:40 Shutter LASER close 03:29:41 Received message from Master: op=PointingHead serial=110446 03:29:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:29:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:29:41 Point started: ret=0 03:29:41 point_skyscan result=0 03:29:42 Check angles 03:29:42 SkyScan query 03:29:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.295<-21553 Statuses=0008 0009 03:29:43 Msec=0 True Az=112.995 Ze=-143.295 Az status=0008 Ze status=0009 03:29:43 Check angles 03:29:43 SkyScan query 03:29:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.355<-20157 Statuses=0008 0009 03:29:43 Msec=750 True Az=112.995 Ze=-122.355 Az status=0008 Ze status=0009 03:29:43 Check angles 03:29:43 SkyScan query 03:29:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.4<-18760 Statuses=0008 0009 03:29:44 Msec=1500 True Az=112.995 Ze=-101.4 Az status=0008 Ze status=0009 03:29:44 Check angles 03:29:44 SkyScan query 03:29:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.445<-17363 Statuses=0008 0009 03:29:45 Msec=2250 True Az=112.995 Ze=-80.445 Az status=0008 Ze status=0009 03:29:45 Check angles 03:29:45 SkyScan query 03:29:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.055<-15937 Statuses=0008 0009 03:29:46 Msec=3000 True Az=112.995 Ze=-59.055 Az status=0008 Ze status=0009 03:29:46 Check angles 03:29:46 SkyScan query 03:29:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.085<-14539 Statuses=0008 0009 03:29:46 Msec=3750 True Az=112.995 Ze=-38.085 Az status=0008 Ze status=0009 03:29:46 Check angles 03:29:46 SkyScan query 03:29:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.13<-13142 Statuses=0008 0009 03:29:47 Msec=4500 True Az=112.995 Ze=-17.13 Az status=0008 Ze status=0009 03:29:47 Check angles 03:29:47 SkyScan query 03:29:48 SkyScan query done: ret=0 az=112.995<-7533 ze=4.215<-11719 Statuses=0008 0009 03:29:48 Msec=5250 True Az=112.995 Ze=4.215 Az status=0008 Ze status=0009 03:29:48 Check angles 03:29:48 SkyScan query 03:29:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:29:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:29:49 Message to Master queued w/err=0: serial=110446 error=0 03:29:54 Received message from Master: op=Filter serial=110447 03:29:54 Color wheel filter change from 0 to 0 03:29:54 FLIGetFilterPos err=0 currentPosition=0 03:29:54 FLIGetStepsRemaining err=0 RemainingSteps=0 03:29:54 Filter is already there-color wheel unchanged 03:29:54 Received message from Master: op=Shutter serial=110448 03:29:54 Shutter LASER close 03:29:54 Received message from Camera: op=State serial=110450 03:29:54 GetSingleValue result=40 Value=cccccccc 03:29:54 SkyScan query 03:29:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:29:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:54 Parameters OK 03:29:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:54 Set A/D data flow result=40 03:29:54 Set A/D channel type result=40 03:29:54 Set A/D encoding result=40 03:29:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:54 Set channel filter=0.000000e+000 result=40 03:29:54 Config A/D Result=40 03:29:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:54 Get A/D filter: -9.255963e+061 result=40 03:29:54 Get A/D value=-858993460 result=40 03:29:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:54 Parameters OK 03:29:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:54 Set A/D data flow result=40 03:29:54 Set A/D channel type result=40 03:29:54 Set A/D encoding result=40 03:29:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:54 Set channel filter=0.000000e+000 result=40 03:29:54 Config A/D Result=40 03:29:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:54 Get A/D filter: -9.255963e+061 result=40 03:29:54 Get A/D value=-858993460 result=40 03:29:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:29:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:29:54 Aux= 03:29:54 Message to Camera, serial 110450 queued 03:30:30 Received message from Master: op=PointingHead serial=110462 03:30:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:30:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:30:31 Point started: ret=0 03:30:31 point_skyscan result=0 03:30:32 Check angles 03:30:32 SkyScan query 03:30:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:30:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:30:32 Message to Master queued w/err=0: serial=110462 error=0 03:30:37 Received message from Master: op=Filter serial=110463 03:30:37 Color wheel filter change from 0 to 0 03:30:37 FLIGetFilterPos err=0 currentPosition=0 03:30:37 FLIGetStepsRemaining err=0 RemainingSteps=0 03:30:37 Filter is already there-color wheel unchanged 03:30:37 Received message from Master: op=Shutter serial=110464 03:30:37 Shutter LASER close 03:30:37 Received message from Camera: op=State serial=110466 03:30:37 GetSingleValue result=40 Value=cccccccc 03:30:37 SkyScan query 03:30:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:30:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:38 Parameters OK 03:30:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:38 Set A/D data flow result=40 03:30:38 Set A/D channel type result=40 03:30:38 Set A/D encoding result=40 03:30:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:38 Set channel filter=0.000000e+000 result=40 03:30:38 Config A/D Result=40 03:30:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:38 Get A/D filter: -9.255963e+061 result=40 03:30:38 Get A/D value=-858993460 result=40 03:30:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:38 Parameters OK 03:30:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:38 Set A/D data flow result=40 03:30:38 Set A/D channel type result=40 03:30:38 Set A/D encoding result=40 03:30:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:38 Set channel filter=0.000000e+000 result=40 03:30:38 Config A/D Result=40 03:30:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:38 Get A/D filter: -9.255963e+061 result=40 03:30:38 Get A/D value=-858993460 result=40 03:30:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:30:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:30:38 Aux= 03:30:38 Message to Camera, serial 110466 queued 03:31:15 Received message from Master: op=PointingHead serial=110479 03:31:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:31:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:31:15 Point started: ret=0 03:31:15 point_skyscan result=0 03:31:16 Check angles 03:31:16 SkyScan query 03:31:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:31:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:31:16 Message to Master queued w/err=0: serial=110479 error=0 03:31:21 Received message from Master: op=Filter serial=110480 03:31:21 Color wheel filter change from 0 to 0 03:31:21 FLIGetFilterPos err=0 currentPosition=0 03:31:21 FLIGetStepsRemaining err=0 RemainingSteps=0 03:31:21 Filter is already there-color wheel unchanged 03:31:22 Received message from Master: op=Shutter serial=110481 03:31:22 Shutter LASER close 03:31:22 Received message from Camera: op=State serial=110483 03:31:22 GetSingleValue result=40 Value=cccccccc 03:31:22 SkyScan query 03:31:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:31:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:22 Parameters OK 03:31:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:22 Set A/D data flow result=40 03:31:22 Set A/D channel type result=40 03:31:22 Set A/D encoding result=40 03:31:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:22 Set channel filter=0.000000e+000 result=40 03:31:22 Config A/D Result=40 03:31:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:22 Get A/D filter: -9.255963e+061 result=40 03:31:22 Get A/D value=-858993460 result=40 03:31:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:22 Parameters OK 03:31:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:22 Set A/D data flow result=40 03:31:22 Set A/D channel type result=40 03:31:22 Set A/D encoding result=40 03:31:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:22 Set channel filter=0.000000e+000 result=40 03:31:22 Config A/D Result=40 03:31:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:22 Get A/D filter: -9.255963e+061 result=40 03:31:22 Get A/D value=-858993460 result=40 03:31:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:31:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:31:22 Aux= 03:31:22 Message to Camera, serial 110483 queued 03:31:59 Received message from Master: op=PointingHead serial=110496 03:31:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:31:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:31:59 Point started: ret=0 03:31:59 point_skyscan result=0 03:32:00 Check angles 03:32:00 SkyScan query 03:32:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:32:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:32:01 Message to Master queued w/err=0: serial=110496 error=0 03:32:06 Received message from Master: op=Filter serial=110497 03:32:06 Color wheel filter change from 0 to 0 03:32:06 FLIGetFilterPos err=0 currentPosition=0 03:32:06 FLIGetStepsRemaining err=0 RemainingSteps=0 03:32:06 Filter is already there-color wheel unchanged 03:32:06 Received message from Master: op=Shutter serial=110498 03:32:06 Shutter LASER close 03:32:06 Received message from Camera: op=State serial=110500 03:32:06 GetSingleValue result=40 Value=cccccccc 03:32:06 SkyScan query 03:32:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:32:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:06 Parameters OK 03:32:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:06 Set A/D data flow result=40 03:32:06 Set A/D channel type result=40 03:32:06 Set A/D encoding result=40 03:32:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:06 Set channel filter=0.000000e+000 result=40 03:32:06 Config A/D Result=40 03:32:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:06 Get A/D filter: -9.255963e+061 result=40 03:32:06 Get A/D value=-858993460 result=40 03:32:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:06 Parameters OK 03:32:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:06 Set A/D data flow result=40 03:32:06 Set A/D channel type result=40 03:32:06 Set A/D encoding result=40 03:32:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:06 Set channel filter=0.000000e+000 result=40 03:32:06 Config A/D Result=40 03:32:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:06 Get A/D filter: -9.255963e+061 result=40 03:32:06 Get A/D value=-858993460 result=40 03:32:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:32:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:32:06 Aux= 03:32:06 Message to Camera, serial 110500 queued 03:32:43 Received message from Master: op=PointingHead serial=110513 03:32:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:32:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:32:44 Point started: ret=0 03:32:44 point_skyscan result=0 03:32:44 Check angles 03:32:44 SkyScan query 03:32:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.79<-13586 Statuses=0008 0009 03:32:45 Msec=0 True Az=112.995 Ze=-23.79 Az status=0008 Ze status=0009 03:32:45 Check angles 03:32:45 SkyScan query 03:32:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.73<-14982 Statuses=0008 0009 03:32:46 Msec=750 True Az=112.995 Ze=-44.73 Az status=0008 Ze status=0009 03:32:46 Check angles 03:32:46 SkyScan query 03:32:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.12<-16408 Statuses=0008 0009 03:32:46 Msec=1500 True Az=112.995 Ze=-66.12 Az status=0008 Ze status=0009 03:32:47 Check angles 03:32:47 SkyScan query 03:32:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.09<-17806 Statuses=0008 0009 03:32:47 Msec=2250 True Az=112.995 Ze=-87.09 Az status=0008 Ze status=0009 03:32:47 Check angles 03:32:47 SkyScan query 03:32:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.03<-19202 Statuses=0008 0009 03:32:48 Msec=3000 True Az=112.995 Ze=-108.03 Az status=0008 Ze status=0009 03:32:48 Check angles 03:32:48 SkyScan query 03:32:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.42<-20628 Statuses=0008 0009 03:32:49 Msec=3750 True Az=112.995 Ze=-129.42 Az status=0008 Ze status=0009 03:32:49 Check angles 03:32:49 SkyScan query 03:32:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.375<-22025 Statuses=0008 0009 03:32:49 Msec=4500 True Az=112.995 Ze=-150.375 Az status=0008 Ze status=0009 03:32:50 Check angles 03:32:50 SkyScan query 03:32:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.15<-23410 Statuses=0008 0009 03:32:50 Msec=5250 True Az=112.995 Ze=-171.15 Az status=0008 Ze status=0009 03:32:50 Check angles 03:32:50 SkyScan query 03:32:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:32:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:32:51 Message to Master queued w/err=0: serial=110513 error=0 03:32:56 Received message from Master: op=Filter serial=110514 03:32:56 Color wheel filter change from 0 to 0 03:32:56 FLIGetFilterPos err=0 currentPosition=0 03:32:56 FLIGetStepsRemaining err=0 RemainingSteps=0 03:32:56 Filter is already there-color wheel unchanged 03:32:56 Received message from Master: op=Shutter serial=110515 03:32:56 Shutter LASER open 03:32:56 Received message from Camera: op=State serial=110517 03:32:56 GetSingleValue result=40 Value=cccccccc 03:32:56 SkyScan query 03:32:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:32:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:57 Parameters OK 03:32:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:57 Set A/D data flow result=40 03:32:57 Set A/D channel type result=40 03:32:57 Set A/D encoding result=40 03:32:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:57 Set channel filter=0.000000e+000 result=40 03:32:57 Config A/D Result=40 03:32:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:57 Get A/D filter: -9.255963e+061 result=40 03:32:57 Get A/D value=-858993460 result=40 03:32:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:57 Parameters OK 03:32:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:57 Set A/D data flow result=40 03:32:57 Set A/D channel type result=40 03:32:57 Set A/D encoding result=40 03:32:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:57 Set channel filter=0.000000e+000 result=40 03:32:57 Config A/D Result=40 03:32:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:57 Get A/D filter: -9.255963e+061 result=40 03:32:57 Get A/D value=-858993460 result=40 03:32:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:32:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:32:57 Aux= 03:32:57 Message to Camera, serial 110517 queued 03:33:05 Received message from Master: op=Shutter serial=110527 03:33:05 Shutter LASER close 03:33:06 Received message from Master: op=PointingHead serial=110531 03:33:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:33:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:33:06 Point started: ret=0 03:33:06 point_skyscan result=0 03:33:07 Check angles 03:33:07 SkyScan query 03:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 03:33:08 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 03:33:08 Check angles 03:33:08 SkyScan query 03:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.545<-20103 Statuses=0008 0009 03:33:08 Msec=750 True Az=112.995 Ze=-121.545 Az status=0008 Ze status=0009 03:33:09 Check angles 03:33:09 SkyScan query 03:33:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.59<-18706 Statuses=0008 0009 03:33:09 Msec=1500 True Az=112.995 Ze=-100.59 Az status=0008 Ze status=0009 03:33:09 Check angles 03:33:09 SkyScan query 03:33:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.635<-17309 Statuses=0008 0009 03:33:10 Msec=2250 True Az=112.995 Ze=-79.635 Az status=0008 Ze status=0009 03:33:10 Check angles 03:33:10 SkyScan query 03:33:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.215<-15881 Statuses=0008 0009 03:33:11 Msec=3000 True Az=112.995 Ze=-58.215 Az status=0008 Ze status=0009 03:33:11 Check angles 03:33:11 SkyScan query 03:33:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.29<-14486 Statuses=0008 0009 03:33:11 Msec=3750 True Az=112.995 Ze=-37.29 Az status=0008 Ze status=0009 03:33:12 Check angles 03:33:12 SkyScan query 03:33:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.32<-13088 Statuses=0008 0009 03:33:12 Msec=4500 True Az=112.995 Ze=-16.32 Az status=0008 Ze status=0009 03:33:12 Check angles 03:33:12 SkyScan query 03:33:13 SkyScan query done: ret=0 az=112.995<-7533 ze=4.845<-11677 Statuses=0008 0009 03:33:13 Msec=5250 True Az=112.995 Ze=4.845 Az status=0008 Ze status=0009 03:33:13 Check angles 03:33:13 SkyScan query 03:33:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:33:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:33:14 Message to Master queued w/err=0: serial=110531 error=0 03:33:19 Received message from Master: op=Filter serial=110532 03:33:19 Color wheel filter change from 0 to 0 03:33:19 FLIGetFilterPos err=0 currentPosition=0 03:33:19 FLIGetStepsRemaining err=0 RemainingSteps=0 03:33:19 Filter is already there-color wheel unchanged 03:33:19 Received message from Master: op=Shutter serial=110533 03:33:19 Shutter LASER close 03:33:19 Received message from Camera: op=State serial=110535 03:33:19 GetSingleValue result=40 Value=cccccccc 03:33:19 SkyScan query 03:33:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:33:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:20 Parameters OK 03:33:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:20 Set A/D data flow result=40 03:33:20 Set A/D channel type result=40 03:33:20 Set A/D encoding result=40 03:33:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:20 Set channel filter=0.000000e+000 result=40 03:33:20 Config A/D Result=40 03:33:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:20 Get A/D filter: -9.255963e+061 result=40 03:33:20 Get A/D value=-858993460 result=40 03:33:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:20 Parameters OK 03:33:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:20 Set A/D data flow result=40 03:33:20 Set A/D channel type result=40 03:33:20 Set A/D encoding result=40 03:33:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:20 Set channel filter=0.000000e+000 result=40 03:33:20 Config A/D Result=40 03:33:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:20 Get A/D filter: -9.255963e+061 result=40 03:33:20 Get A/D value=-858993460 result=40 03:33:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:33:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:33:20 Aux= 03:33:20 Message to Camera, serial 110535 queued 03:33:38 Received message from Master: op=Identify serial=110536 03:33:56 Received message from Master: op=PointingHead serial=110551 03:33:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:33:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:33:57 Point started: ret=0 03:33:57 point_skyscan result=0 03:33:57 Check angles 03:33:57 SkyScan query 03:33:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:33:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:33:58 Message to Master queued w/err=0: serial=110551 error=0 03:34:03 Received message from Master: op=Filter serial=110552 03:34:03 Color wheel filter change from 0 to 0 03:34:03 FLIGetFilterPos err=0 currentPosition=0 03:34:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:03 Filter is already there-color wheel unchanged 03:34:03 Received message from Master: op=Shutter serial=110553 03:34:03 Shutter LASER close 03:34:03 Received message from Camera: op=State serial=110555 03:34:03 GetSingleValue result=40 Value=cccccccc 03:34:03 SkyScan query 03:34:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:34:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:04 Parameters OK 03:34:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:04 Set A/D data flow result=40 03:34:04 Set A/D channel type result=40 03:34:04 Set A/D encoding result=40 03:34:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:04 Set channel filter=0.000000e+000 result=40 03:34:04 Config A/D Result=40 03:34:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:04 Get A/D filter: -9.255963e+061 result=40 03:34:04 Get A/D value=-858993460 result=40 03:34:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:04 Parameters OK 03:34:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:04 Set A/D data flow result=40 03:34:04 Set A/D channel type result=40 [UTC 2019-3-5 03:34:04] 03:34:04 Set A/D encoding result=40 03:34:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:04 Set channel filter=0.000000e+000 result=40 03:34:04 Config A/D Result=40 03:34:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:04 Get A/D filter: -9.255963e+061 result=40 03:34:04 Get A/D value=-858993460 result=40 03:34:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:04 Aux= 03:34:04 Message to Camera, serial 110555 queued 03:34:41 Received message from Master: op=PointingHead serial=110568 03:34:41 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:34:41 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:34:41 Point started: ret=0 03:34:41 point_skyscan result=0 03:34:42 Check angles 03:34:42 SkyScan query 03:34:42 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.495<-12433 Statuses=0009 0008 03:34:42 Msec=0 True Az=136.095 Ze=-6.495 Az status=0009 Ze status=0008 03:34:43 Check angles 03:34:43 SkyScan query 03:34:43 SkyScan query done: ret=0 az=153.96<-10264 ze=-6.48<-12432 Statuses=0009 0008 03:34:43 Msec=750 True Az=153.96 Ze=-6.48 Az status=0009 Ze status=0008 03:34:43 Check angles 03:34:43 SkyScan query 03:34:44 SkyScan query done: ret=0 az=171.405<-11427 ze=-6.48<-12432 Statuses=0009 0008 03:34:44 Msec=1500 True Az=171.405 Ze=-6.48 Az status=0009 Ze status=0008 03:34:44 Check angles 03:34:44 SkyScan query 03:34:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 03:34:45 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 03:34:45 Message to Master queued w/err=0: serial=110568 error=0 03:34:50 Received message from Master: op=Filter serial=110569 03:34:50 Color wheel filter change from 0 to 0 03:34:50 FLIGetFilterPos err=0 currentPosition=0 03:34:50 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:50 Filter is already there-color wheel unchanged 03:34:50 Received message from Master: op=Shutter serial=110570 03:34:50 Shutter LASER close 03:34:50 Received message from Camera: op=State serial=110572 03:34:50 GetSingleValue result=40 Value=cccccccc 03:34:50 SkyScan query 03:34:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 03:34:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:50 Parameters OK 03:34:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:50 Set A/D data flow result=40 03:34:50 Set A/D channel type result=40 03:34:50 Set A/D encoding result=40 03:34:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:50 Set channel filter=0.000000e+000 result=40 03:34:50 Config A/D Result=40 03:34:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:50 Get A/D filter: -9.255963e+061 result=40 03:34:50 Get A/D value=-858993460 result=40 03:34:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:50 Parameters OK 03:34:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:50 Set A/D data flow result=40 03:34:50 Set A/D channel type result=40 03:34:50 Set A/D encoding result=40 03:34:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:50 Set channel filter=0.000000e+000 result=40 03:34:50 Config A/D Result=40 03:34:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:50 Get A/D filter: -9.255963e+061 result=40 03:34:50 Get A/D value=-858993460 result=40 03:34:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:50 Aux= 03:34:50 Message to Camera, serial 110572 queued 03:35:27 Received message from Master: op=PointingHead serial=110585 03:35:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:35:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:35:28 Point started: ret=0 03:35:28 point_skyscan result=0 03:35:28 Check angles 03:35:28 SkyScan query 03:35:29 SkyScan query done: ret=0 az=152.655<-10177 ze=6.51<-11566 Statuses=0009 0008 03:35:29 Msec=0 True Az=152.655 Ze=6.51 Az status=0009 Ze status=0008 03:35:29 Check angles 03:35:29 SkyScan query 03:35:30 SkyScan query done: ret=0 az=135.165<-9011 ze=6.495<-11567 Statuses=0009 0008 03:35:30 Msec=750 True Az=135.165 Ze=6.495 Az status=0009 Ze status=0008 03:35:30 Check angles 03:35:30 SkyScan query 03:35:31 SkyScan query done: ret=0 az=117.705<-7847 ze=6.495<-11567 Statuses=0009 0008 03:35:31 Msec=1500 True Az=117.705 Ze=6.495 Az status=0009 Ze status=0008 03:35:31 Check angles 03:35:31 SkyScan query 03:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:35:31 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:35:31 Message to Master queued w/err=0: serial=110585 error=0 03:35:36 Received message from Master: op=Filter serial=110586 03:35:36 Color wheel filter change from 0 to 0 03:35:36 FLIGetFilterPos err=0 currentPosition=0 03:35:36 FLIGetStepsRemaining err=0 RemainingSteps=0 03:35:36 Filter is already there-color wheel unchanged 03:35:36 Received message from Master: op=Shutter serial=110587 03:35:36 Shutter LASER close 03:35:36 Received message from Camera: op=State serial=110589 03:35:36 GetSingleValue result=40 Value=cccccccc 03:35:36 SkyScan query 03:35:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:35:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:37 Parameters OK 03:35:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:37 Set A/D data flow result=40 03:35:37 Set A/D channel type result=40 03:35:37 Set A/D encoding result=40 03:35:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:37 Set channel filter=0.000000e+000 result=40 03:35:37 Config A/D Result=40 03:35:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:37 Get A/D filter: -9.255963e+061 result=40 03:35:37 Get A/D value=-858993460 result=40 03:35:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:37 Parameters OK 03:35:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:37 Set A/D data flow result=40 03:35:37 Set A/D channel type result=40 03:35:37 Set A/D encoding result=40 03:35:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:37 Set channel filter=0.000000e+000 result=40 03:35:37 Config A/D Result=40 03:35:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:37 Get A/D filter: -9.255963e+061 result=40 03:35:37 Get A/D value=-858993460 result=40 03:35:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:35:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:35:37 Aux= 03:35:37 Message to Camera, serial 110589 queued 03:36:14 Received message from Master: op=PointingHead serial=110602 03:36:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:36:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:36:14 Point started: ret=0 03:36:14 point_skyscan result=0 03:36:15 Check angles 03:36:15 SkyScan query 03:36:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 03:36:16 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 03:36:16 Check angles 03:36:16 SkyScan query 03:36:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 03:36:16 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 03:36:16 Check angles 03:36:16 SkyScan query 03:36:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.28<-16352 Statuses=0008 0009 03:36:17 Msec=1500 True Az=112.995 Ze=-65.28 Az status=0008 Ze status=0009 03:36:17 Check angles 03:36:17 SkyScan query 03:36:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.235<-17749 Statuses=0008 0009 03:36:18 Msec=2250 True Az=112.995 Ze=-86.235 Az status=0008 Ze status=0009 03:36:18 Check angles 03:36:18 SkyScan query 03:36:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.175<-19145 Statuses=0008 0009 03:36:19 Msec=3000 True Az=112.995 Ze=-107.175 Az status=0008 Ze status=0009 03:36:19 Check angles 03:36:19 SkyScan query 03:36:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.13<-20542 Statuses=0008 0009 03:36:19 Msec=3750 True Az=112.995 Ze=-128.13 Az status=0008 Ze status=0009 03:36:19 Check angles 03:36:19 SkyScan query 03:36:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.1<-21940 Statuses=0008 0009 03:36:20 Msec=4500 True Az=112.995 Ze=-149.1 Az status=0008 Ze status=0009 03:36:20 Check angles 03:36:20 SkyScan query 03:36:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.04<-23336 Statuses=0008 0009 03:36:21 Msec=5250 True Az=112.995 Ze=-170.04 Az status=0008 Ze status=0009 03:36:21 Check angles 03:36:21 SkyScan query 03:36:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:36:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:36:22 Message to Master queued w/err=0: serial=110602 error=0 03:36:27 Received message from Master: op=Filter serial=110603 03:36:27 Color wheel filter change from 0 to 0 03:36:27 FLIGetFilterPos err=0 currentPosition=0 03:36:27 FLIGetStepsRemaining err=0 RemainingSteps=0 03:36:27 Filter is already there-color wheel unchanged 03:36:27 Received message from Master: op=Shutter serial=110604 03:36:27 Shutter LASER open 03:36:27 Received message from Camera: op=State serial=110606 03:36:27 GetSingleValue result=40 Value=cccccccc 03:36:27 SkyScan query 03:36:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:36:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:27 Parameters OK 03:36:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:27 Set A/D data flow result=40 03:36:27 Set A/D channel type result=40 03:36:27 Set A/D encoding result=40 03:36:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:27 Set channel filter=0.000000e+000 result=40 03:36:27 Config A/D Result=40 03:36:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:27 Get A/D filter: -9.255963e+061 result=40 03:36:27 Get A/D value=-858993460 result=40 03:36:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:27 Parameters OK 03:36:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:27 Set A/D data flow result=40 03:36:27 Set A/D channel type result=40 03:36:27 Set A/D encoding result=40 03:36:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:27 Set channel filter=0.000000e+000 result=40 03:36:27 Config A/D Result=40 03:36:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:27 Get A/D filter: -9.255963e+061 result=40 03:36:27 Get A/D value=-858993460 result=40 03:36:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:36:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:36:27 Aux= 03:36:27 Message to Camera, serial 110606 queued 03:36:36 Received message from Master: op=Shutter serial=110616 03:36:36 Shutter LASER close 03:36:36 Received message from Master: op=PointingHead serial=110620 03:36:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:36:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:36:37 Point started: ret=0 03:36:37 point_skyscan result=0 03:36:37 Check angles 03:36:37 SkyScan query 03:36:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 03:36:38 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 03:36:38 Check angles 03:36:38 SkyScan query 03:36:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.445<-20163 Statuses=0008 0009 03:36:39 Msec=750 True Az=112.995 Ze=-122.445 Az status=0008 Ze status=0009 03:36:39 Check angles 03:36:39 SkyScan query 03:36:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.475<-18765 Statuses=0008 0009 03:36:40 Msec=1500 True Az=112.995 Ze=-101.475 Az status=0008 Ze status=0009 03:36:40 Check angles 03:36:40 SkyScan query 03:36:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.52<-17368 Statuses=0008 0009 03:36:40 Msec=2250 True Az=112.995 Ze=-80.52 Az status=0008 Ze status=0009 03:36:40 Check angles 03:36:40 SkyScan query 03:36:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.565<-15971 Statuses=0008 0009 03:36:41 Msec=3000 True Az=112.995 Ze=-59.565 Az status=0008 Ze status=0009 03:36:41 Check angles 03:36:41 SkyScan query 03:36:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.16<-14544 Statuses=0008 0009 03:36:42 Msec=3750 True Az=112.995 Ze=-38.16 Az status=0008 Ze status=0009 03:36:42 Check angles 03:36:42 SkyScan query 03:36:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.22<-13148 Statuses=0008 0009 03:36:43 Msec=4500 True Az=112.995 Ze=-17.22 Az status=0008 Ze status=0009 03:36:43 Check angles 03:36:43 SkyScan query 03:36:43 SkyScan query done: ret=0 az=112.995<-7533 ze=3.735<-11751 Statuses=0008 0009 03:36:43 Msec=5250 True Az=112.995 Ze=3.735 Az status=0008 Ze status=0009 03:36:43 Check angles 03:36:43 SkyScan query 03:36:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:36:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:36:44 Message to Master queued w/err=0: serial=110620 error=0 03:36:49 Received message from Master: op=Filter serial=110621 03:36:49 Color wheel filter change from 0 to 0 03:36:49 FLIGetFilterPos err=0 currentPosition=0 03:36:49 FLIGetStepsRemaining err=0 RemainingSteps=0 03:36:49 Filter is already there-color wheel unchanged 03:36:49 Received message from Master: op=Shutter serial=110622 03:36:49 Shutter LASER close 03:36:49 Received message from Camera: op=State serial=110624 03:36:49 GetSingleValue result=40 Value=cccccccc 03:36:49 SkyScan query 03:36:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:36:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:50 Parameters OK 03:36:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:50 Set A/D data flow result=40 03:36:50 Set A/D channel type result=40 03:36:50 Set A/D encoding result=40 03:36:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:50 Set channel filter=0.000000e+000 result=40 03:36:50 Config A/D Result=40 03:36:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:50 Get A/D filter: -9.255963e+061 result=40 03:36:50 Get A/D value=-858993460 result=40 03:36:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:50 Parameters OK 03:36:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:50 Set A/D data flow result=40 03:36:50 Set A/D channel type result=40 03:36:50 Set A/D encoding result=40 03:36:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:50 Set channel filter=0.000000e+000 result=40 03:36:50 Config A/D Result=40 03:36:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:50 Get A/D filter: -9.255963e+061 result=40 03:36:50 Get A/D value=-858993460 result=40 03:36:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:36:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:36:50 Aux= 03:36:50 Message to Camera, serial 110624 queued 03:37:27 Received message from Master: op=PointingHead serial=110637 03:37:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:37:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:37:27 Point started: ret=0 03:37:27 point_skyscan result=0 03:37:28 Check angles 03:37:28 SkyScan query 03:37:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:37:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:37:28 Message to Master queued w/err=0: serial=110637 error=0 03:37:33 Received message from Master: op=Filter serial=110638 03:37:33 Color wheel filter change from 0 to 0 03:37:33 FLIGetFilterPos err=0 currentPosition=0 03:37:33 FLIGetStepsRemaining err=0 RemainingSteps=0 03:37:33 Filter is already there-color wheel unchanged 03:37:34 Received message from Master: op=Shutter serial=110639 03:37:34 Shutter LASER close 03:37:34 Received message from Camera: op=State serial=110641 03:37:34 GetSingleValue result=40 Value=cccccccc 03:37:34 SkyScan query 03:37:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:37:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:34 Parameters OK 03:37:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:34 Set A/D data flow result=40 03:37:34 Set A/D channel type result=40 03:37:34 Set A/D encoding result=40 03:37:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:34 Set channel filter=0.000000e+000 result=40 03:37:34 Config A/D Result=40 03:37:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:34 Get A/D filter: -9.255963e+061 result=40 03:37:34 Get A/D value=-858993460 result=40 03:37:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:34 Parameters OK 03:37:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:34 Set A/D data flow result=40 03:37:34 Set A/D channel type result=40 03:37:34 Set A/D encoding result=40 03:37:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:34 Set channel filter=0.000000e+000 result=40 03:37:34 Config A/D Result=40 03:37:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:34 Get A/D filter: -9.255963e+061 result=40 03:37:34 Get A/D value=-858993460 result=40 03:37:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:37:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:37:34 Aux= 03:37:34 Message to Camera, serial 110641 queued 03:38:11 Received message from Master: op=PointingHead serial=110654 03:38:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:38:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:38:11 Point started: ret=0 03:38:11 point_skyscan result=0 03:38:12 Check angles 03:38:12 SkyScan query 03:38:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:38:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:38:13 Message to Master queued w/err=0: serial=110654 error=0 03:38:18 Received message from Master: op=Filter serial=110655 03:38:18 Color wheel filter change from 0 to 0 03:38:18 FLIGetFilterPos err=0 currentPosition=0 03:38:18 FLIGetStepsRemaining err=0 RemainingSteps=0 03:38:18 Filter is already there-color wheel unchanged 03:38:18 Received message from Master: op=Shutter serial=110656 03:38:18 Shutter LASER close 03:38:18 Received message from Camera: op=State serial=110658 03:38:18 GetSingleValue result=40 Value=cccccccc 03:38:18 SkyScan query 03:38:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:38:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:18 Parameters OK 03:38:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:18 Set A/D data flow result=40 03:38:18 Set A/D channel type result=40 03:38:18 Set A/D encoding result=40 03:38:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:18 Set channel filter=0.000000e+000 result=40 03:38:18 Config A/D Result=40 03:38:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:18 Get A/D filter: -9.255963e+061 result=40 03:38:18 Get A/D value=-858993460 result=40 03:38:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:18 Parameters OK 03:38:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:18 Set A/D data flow result=40 03:38:18 Set A/D channel type result=40 03:38:18 Set A/D encoding result=40 03:38:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:18 Set channel filter=0.000000e+000 result=40 03:38:18 Config A/D Result=40 03:38:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:18 Get A/D filter: -9.255963e+061 result=40 03:38:18 Get A/D value=-858993460 result=40 03:38:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:38:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:38:18 Aux= 03:38:18 Message to Camera, serial 110658 queued 03:38:54 Received message from Master: op=PointingHead serial=110670 03:38:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:38:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:38:55 Point started: ret=0 03:38:55 point_skyscan result=0 03:38:55 Check angles 03:38:55 SkyScan query 03:38:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:38:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:38:56 Message to Master queued w/err=0: serial=110670 error=0 03:39:01 Received message from Master: op=Filter serial=110671 03:39:01 Color wheel filter change from 0 to 0 03:39:01 FLIGetFilterPos err=0 currentPosition=0 03:39:01 FLIGetStepsRemaining err=0 RemainingSteps=0 03:39:01 Filter is already there-color wheel unchanged 03:39:01 Received message from Master: op=Shutter serial=110672 03:39:01 Shutter LASER close 03:39:01 Received message from Camera: op=State serial=110674 03:39:01 GetSingleValue result=40 Value=cccccccc 03:39:01 SkyScan query 03:39:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:39:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:02 Parameters OK 03:39:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:02 Set A/D data flow result=40 03:39:02 Set A/D channel type result=40 03:39:02 Set A/D encoding result=40 03:39:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:02 Set channel filter=0.000000e+000 result=40 03:39:02 Config A/D Result=40 03:39:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:02 Get A/D filter: -9.255963e+061 result=40 03:39:02 Get A/D value=-858993460 result=40 03:39:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:02 Parameters OK 03:39:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:02 Set A/D data flow result=40 03:39:02 Set A/D channel type result=40 03:39:02 Set A/D encoding result=40 03:39:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:02 Set channel filter=0.000000e+000 result=40 03:39:02 Config A/D Result=40 03:39:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:02 Get A/D filter: -9.255963e+061 result=40 03:39:02 Get A/D value=-858993460 result=40 03:39:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:39:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:39:02 Aux= 03:39:02 Message to Camera, serial 110674 queued 03:39:39 Received message from Master: op=PointingHead serial=110687 03:39:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:39:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:39:39 Point started: ret=0 03:39:39 point_skyscan result=0 03:39:40 Check angles 03:39:40 SkyScan query 03:39:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.79<-13586 Statuses=0008 0009 03:39:40 Msec=0 True Az=112.995 Ze=-23.79 Az status=0008 Ze status=0009 03:39:41 Check angles 03:39:41 SkyScan query 03:39:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.76<-14984 Statuses=0008 0009 03:39:41 Msec=750 True Az=112.995 Ze=-44.76 Az status=0008 Ze status=0009 03:39:41 Check angles 03:39:41 SkyScan query 03:39:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 03:39:42 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 03:39:42 Check angles 03:39:42 SkyScan query 03:39:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.655<-17777 Statuses=0008 0009 03:39:43 Msec=2250 True Az=112.995 Ze=-86.655 Az status=0008 Ze status=0009 03:39:43 Check angles 03:39:43 SkyScan query 03:39:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.045<-19203 Statuses=0008 0009 03:39:43 Msec=3000 True Az=112.995 Ze=-108.045 Az status=0008 Ze status=0009 03:39:44 Check angles 03:39:44 SkyScan query 03:39:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.435<-20629 Statuses=0008 0009 03:39:44 Msec=3750 True Az=112.995 Ze=-129.435 Az status=0008 Ze status=0009 03:39:44 Check angles 03:39:44 SkyScan query 03:39:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.795<-22053 Statuses=0008 0009 03:39:45 Msec=4500 True Az=112.995 Ze=-150.795 Az status=0008 Ze status=0009 03:39:45 Check angles 03:39:45 SkyScan query 03:39:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.48<-23432 Statuses=0008 0009 03:39:46 Msec=5250 True Az=112.995 Ze=-171.48 Az status=0008 Ze status=0009 03:39:46 Check angles 03:39:46 SkyScan query 03:39:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:39:46 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:39:46 Message to Master queued w/err=0: serial=110687 error=0 03:39:51 Received message from Master: op=Filter serial=110688 03:39:51 Color wheel filter change from 0 to 0 03:39:51 FLIGetFilterPos err=0 currentPosition=0 03:39:51 FLIGetStepsRemaining err=0 RemainingSteps=0 03:39:51 Filter is already there-color wheel unchanged 03:39:52 Received message from Master: op=Shutter serial=110689 03:39:52 Shutter LASER open 03:39:52 Received message from Camera: op=State serial=110691 03:39:52 GetSingleValue result=40 Value=cccccccc 03:39:52 SkyScan query 03:39:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:39:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:52 Parameters OK 03:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:52 Set A/D data flow result=40 03:39:52 Set A/D channel type result=40 03:39:52 Set A/D encoding result=40 03:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:52 Set channel filter=0.000000e+000 result=40 03:39:52 Config A/D Result=40 03:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:52 Get A/D filter: -9.255963e+061 result=40 03:39:52 Get A/D value=-858993460 result=40 03:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:52 Parameters OK 03:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:52 Set A/D data flow result=40 03:39:52 Set A/D channel type result=40 03:39:52 Set A/D encoding result=40 03:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:52 Set channel filter=0.000000e+000 result=40 03:39:52 Config A/D Result=40 03:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:52 Get A/D filter: -9.255963e+061 result=40 03:39:52 Get A/D value=-858993460 result=40 03:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:39:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:39:52 Aux= 03:39:52 Message to Camera, serial 110691 queued 03:40:01 Received message from Master: op=Shutter serial=110701 03:40:01 Shutter LASER close 03:40:01 Received message from Master: op=PointingHead serial=110705 03:40:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:40:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:40:02 Point started: ret=0 03:40:02 point_skyscan result=0 03:40:03 Check angles 03:40:03 SkyScan query 03:40:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 03:40:03 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 03:40:03 Check angles 03:40:03 SkyScan query 03:40:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.565<-20171 Statuses=0008 0009 03:40:04 Msec=750 True Az=112.995 Ze=-122.565 Az status=0008 Ze status=0009 03:40:04 Check angles 03:40:04 SkyScan query 03:40:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.61<-18774 Statuses=0008 0009 03:40:05 Msec=1500 True Az=112.995 Ze=-101.61 Az status=0008 Ze status=0009 03:40:05 Check angles 03:40:05 SkyScan query 03:40:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.625<-17375 Statuses=0008 0009 03:40:05 Msec=2250 True Az=112.995 Ze=-80.625 Az status=0008 Ze status=0009 03:40:06 Check angles 03:40:06 SkyScan query 03:40:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.685<-15979 Statuses=0008 0009 03:40:06 Msec=3000 True Az=112.995 Ze=-59.685 Az status=0008 Ze status=0009 03:40:06 Check angles 03:40:06 SkyScan query 03:40:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.28<-14552 Statuses=0008 0009 03:40:07 Msec=3750 True Az=112.995 Ze=-38.28 Az status=0008 Ze status=0009 03:40:07 Check angles 03:40:07 SkyScan query 03:40:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.355<-13157 Statuses=0008 0009 03:40:08 Msec=4500 True Az=112.995 Ze=-17.355 Az status=0008 Ze status=0009 03:40:08 Check angles 03:40:08 SkyScan query 03:40:08 SkyScan query done: ret=0 az=112.995<-7533 ze=3.615<-11759 Statuses=0008 0009 03:40:08 Msec=5250 True Az=112.995 Ze=3.615 Az status=0008 Ze status=0009 03:40:09 Check angles 03:40:09 SkyScan query 03:40:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:40:09 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:40:09 Message to Master queued w/err=0: serial=110705 error=0 03:40:14 Received message from Master: op=Filter serial=110706 03:40:14 Color wheel filter change from 0 to 0 03:40:14 FLIGetFilterPos err=0 currentPosition=0 03:40:14 FLIGetStepsRemaining err=0 RemainingSteps=0 03:40:14 Filter is already there-color wheel unchanged 03:40:14 Received message from Master: op=Shutter serial=110707 03:40:14 Shutter LASER close 03:40:14 Received message from Camera: op=State serial=110709 03:40:14 GetSingleValue result=40 Value=cccccccc 03:40:14 SkyScan query 03:40:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:40:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:15 Parameters OK 03:40:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:15 Set A/D data flow result=40 03:40:15 Set A/D channel type result=40 03:40:15 Set A/D encoding result=40 03:40:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:15 Set channel filter=0.000000e+000 result=40 03:40:15 Config A/D Result=40 03:40:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:15 Get A/D filter: -9.255963e+061 result=40 03:40:15 Get A/D value=-858993460 result=40 03:40:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:15 Parameters OK 03:40:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:15 Set A/D data flow result=40 03:40:15 Set A/D channel type result=40 03:40:15 Set A/D encoding result=40 03:40:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:15 Set channel filter=0.000000e+000 result=40 03:40:15 Config A/D Result=40 03:40:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:15 Get A/D filter: -9.255963e+061 result=40 03:40:15 Get A/D value=-858993460 result=40 03:40:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:40:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:40:15 Aux= 03:40:15 Message to Camera, serial 110709 queued 03:40:52 Received message from Master: op=PointingHead serial=110722 03:40:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:40:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:40:52 Point started: ret=0 03:40:52 point_skyscan result=0 03:40:53 Check angles 03:40:53 SkyScan query 03:40:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:40:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:40:54 Message to Master queued w/err=0: serial=110722 error=0 03:40:59 Received message from Master: op=Filter serial=110723 03:40:59 Color wheel filter change from 0 to 0 03:40:59 FLIGetFilterPos err=0 currentPosition=0 03:40:59 FLIGetStepsRemaining err=0 RemainingSteps=0 03:40:59 Filter is already there-color wheel unchanged 03:40:59 Received message from Master: op=Shutter serial=110724 03:40:59 Shutter LASER close 03:40:59 Received message from Camera: op=State serial=110726 03:40:59 GetSingleValue result=40 Value=cccccccc 03:40:59 SkyScan query 03:40:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:40:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:59 Parameters OK 03:40:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:59 Set A/D data flow result=40 03:40:59 Set A/D channel type result=40 03:40:59 Set A/D encoding result=40 03:40:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:59 Set channel filter=0.000000e+000 result=40 03:40:59 Config A/D Result=40 03:40:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:59 Get A/D filter: -9.255963e+061 result=40 03:40:59 Get A/D value=-858993460 result=40 03:40:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:59 Parameters OK 03:40:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:59 Set A/D data flow result=40 03:40:59 Set A/D channel type result=40 03:40:59 Set A/D encoding result=40 03:40:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:59 Set channel filter=0.000000e+000 result=40 03:40:59 Config A/D Result=40 03:40:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:59 Get A/D filter: -9.255963e+061 result=40 03:40:59 Get A/D value=-858993460 result=40 03:40:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:40:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:40:59 Aux= 03:40:59 Message to Camera, serial 110726 queued 03:41:36 Received message from Master: op=PointingHead serial=110739 03:41:36 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:41:36 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:41:37 Point started: ret=0 03:41:37 point_skyscan result=0 03:41:37 Check angles 03:41:37 SkyScan query 03:41:38 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.495<-12433 Statuses=0009 0008 03:41:38 Msec=0 True Az=135.915 Ze=-6.495 Az status=0009 Ze status=0008 03:41:38 Check angles 03:41:38 SkyScan query 03:41:39 SkyScan query done: ret=0 az=153.78<-10252 ze=-6.48<-12432 Statuses=0009 0008 03:41:39 Msec=750 True Az=153.78 Ze=-6.48 Az status=0009 Ze status=0008 03:41:39 Check angles 03:41:39 SkyScan query 03:41:39 SkyScan query done: ret=0 az=171.525<-11435 ze=-6.48<-12432 Statuses=0009 0008 03:41:39 Msec=1500 True Az=171.525 Ze=-6.48 Az status=0009 Ze status=0008 03:41:40 Check angles 03:41:40 SkyScan query 03:41:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 03:41:40 Msec=2250 True Az=175.995 Ze=-6.48 Az status=0008 Ze status=0008 03:41:40 Message to Master queued w/err=0: serial=110739 error=0 03:41:45 Received message from Master: op=Filter serial=110740 03:41:45 Color wheel filter change from 0 to 0 03:41:45 FLIGetFilterPos err=0 currentPosition=0 03:41:45 FLIGetStepsRemaining err=0 RemainingSteps=0 03:41:45 Filter is already there-color wheel unchanged 03:41:45 Received message from Master: op=Shutter serial=110741 03:41:45 Shutter LASER close 03:41:45 Received message from Camera: op=State serial=110743 03:41:45 GetSingleValue result=40 Value=cccccccc 03:41:45 SkyScan query 03:41:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.48<-12432 Statuses=0008 0008 03:41:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:46 Parameters OK 03:41:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:46 Set A/D data flow result=40 03:41:46 Set A/D channel type result=40 03:41:46 Set A/D encoding result=40 03:41:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:46 Set channel filter=0.000000e+000 result=40 03:41:46 Config A/D Result=40 03:41:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:46 Get A/D filter: -9.255963e+061 result=40 03:41:46 Get A/D value=-858993460 result=40 03:41:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:46 Parameters OK 03:41:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:46 Set A/D data flow result=40 03:41:46 Set A/D channel type result=40 03:41:46 Set A/D encoding result=40 03:41:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:46 Set channel filter=0.000000e+000 result=40 03:41:46 Config A/D Result=40 03:41:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:46 Get A/D filter: -9.255963e+061 result=40 03:41:46 Get A/D value=-858993460 result=40 03:41:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.480000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:41:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:41:46 Aux= 03:41:46 Message to Camera, serial 110743 queued 03:42:23 Received message from Master: op=PointingHead serial=110756 03:42:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:42:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:42:23 Point started: ret=0 03:42:23 point_skyscan result=0 03:42:24 Check angles 03:42:24 SkyScan query 03:42:24 SkyScan query done: ret=0 az=152.925<-10195 ze=6.51<-11566 Statuses=0009 0008 03:42:24 Msec=0 True Az=152.925 Ze=6.51 Az status=0009 Ze status=0008 03:42:25 Check angles 03:42:25 SkyScan query 03:42:25 SkyScan query done: ret=0 az=135.465<-9031 ze=6.495<-11567 Statuses=0009 0008 03:42:25 Msec=750 True Az=135.465 Ze=6.495 Az status=0009 Ze status=0008 03:42:25 Check angles 03:42:25 SkyScan query 03:42:26 SkyScan query done: ret=0 az=117.99<-7866 ze=6.495<-11567 Statuses=0009 0008 03:42:26 Msec=1500 True Az=117.99 Ze=6.495 Az status=0009 Ze status=0008 03:42:26 Check angles 03:42:26 SkyScan query 03:42:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:42:27 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:42:27 Message to Master queued w/err=0: serial=110756 error=0 03:42:32 Received message from Master: op=Filter serial=110757 03:42:32 Color wheel filter change from 0 to 0 03:42:32 FLIGetFilterPos err=0 currentPosition=0 03:42:32 FLIGetStepsRemaining err=0 RemainingSteps=0 03:42:32 Filter is already there-color wheel unchanged 03:42:32 Received message from Master: op=Shutter serial=110758 03:42:32 Shutter LASER close 03:42:32 Received message from Camera: op=State serial=110760 03:42:32 GetSingleValue result=40 Value=cccccccc 03:42:32 SkyScan query 03:42:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:42:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:32 Parameters OK 03:42:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:32 Set A/D data flow result=40 03:42:32 Set A/D channel type result=40 03:42:32 Set A/D encoding result=40 03:42:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:32 Set channel filter=0.000000e+000 result=40 03:42:32 Config A/D Result=40 03:42:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:32 Get A/D filter: -9.255963e+061 result=40 03:42:32 Get A/D value=-858993460 result=40 03:42:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:32 Parameters OK 03:42:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:32 Set A/D data flow result=40 03:42:32 Set A/D channel type result=40 03:42:32 Set A/D encoding result=40 03:42:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:32 Set channel filter=0.000000e+000 result=40 03:42:32 Config A/D Result=40 03:42:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:32 Get A/D filter: -9.255963e+061 result=40 03:42:32 Get A/D value=-858993460 result=40 03:42:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:42:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:42:32 Aux= 03:42:32 Message to Camera, serial 110760 queued 03:43:09 Received message from Master: op=PointingHead serial=110773 03:43:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:43:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:43:10 Point started: ret=0 03:43:10 point_skyscan result=0 03:43:10 Check angles 03:43:10 SkyScan query 03:43:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.475<-13565 Statuses=0008 0009 03:43:11 Msec=0 True Az=112.995 Ze=-23.475 Az status=0008 Ze status=0009 03:43:11 Check angles 03:43:11 SkyScan query 03:43:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 03:43:12 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 03:43:12 Check angles 03:43:12 SkyScan query 03:43:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.82<-16388 Statuses=0008 0009 03:43:12 Msec=1500 True Az=112.995 Ze=-65.82 Az status=0008 Ze status=0009 03:43:13 Check angles 03:43:13 SkyScan query 03:43:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.775<-17785 Statuses=0008 0009 03:43:13 Msec=2250 True Az=112.995 Ze=-86.775 Az status=0008 Ze status=0009 03:43:13 Check angles 03:43:13 SkyScan query 03:43:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.73<-19182 Statuses=0008 0009 03:43:14 Msec=3000 True Az=112.995 Ze=-107.73 Az status=0008 Ze status=0009 03:43:14 Check angles 03:43:14 SkyScan query 03:43:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.12<-20608 Statuses=0008 0009 03:43:15 Msec=3750 True Az=112.995 Ze=-129.12 Az status=0008 Ze status=0009 03:43:15 Check angles 03:43:15 SkyScan query 03:43:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.495<-22033 Statuses=0008 0009 03:43:16 Msec=4500 True Az=112.995 Ze=-150.495 Az status=0008 Ze status=0009 03:43:16 Check angles 03:43:16 SkyScan query 03:43:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.255<-23417 Statuses=0008 0009 03:43:16 Msec=5250 True Az=112.995 Ze=-171.255 Az status=0008 Ze status=0009 03:43:16 Check angles 03:43:16 SkyScan query 03:43:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:43:17 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:43:17 Message to Master queued w/err=0: serial=110773 error=0 03:43:22 Received message from Master: op=Filter serial=110774 03:43:22 Color wheel filter change from 0 to 0 03:43:22 FLIGetFilterPos err=0 currentPosition=0 03:43:22 FLIGetStepsRemaining err=0 RemainingSteps=0 03:43:22 Filter is already there-color wheel unchanged 03:43:22 Received message from Master: op=Shutter serial=110775 03:43:22 Shutter LASER open 03:43:22 Received message from Camera: op=State serial=110777 03:43:22 GetSingleValue result=40 Value=cccccccc 03:43:22 SkyScan query 03:43:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:43:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:23 Parameters OK 03:43:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:23 Set A/D data flow result=40 03:43:23 Set A/D channel type result=40 03:43:23 Set A/D encoding result=40 03:43:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:23 Set channel filter=0.000000e+000 result=40 03:43:23 Config A/D Result=40 03:43:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:23 Get A/D filter: -9.255963e+061 result=40 03:43:23 Get A/D value=-858993460 result=40 03:43:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:23 Parameters OK 03:43:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:23 Set A/D data flow result=40 03:43:23 Set A/D channel type result=40 03:43:23 Set A/D encoding result=40 03:43:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:23 Set channel filter=0.000000e+000 result=40 03:43:23 Config A/D Result=40 03:43:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:23 Get A/D filter: -9.255963e+061 result=40 03:43:23 Get A/D value=-858993460 result=40 03:43:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:43:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:43:23 Aux= 03:43:23 Message to Camera, serial 110777 queued 03:43:31 Received message from Master: op=Shutter serial=110787 03:43:31 Shutter LASER close 03:43:32 Received message from Master: op=PointingHead serial=110791 03:43:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:43:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:43:32 Point started: ret=0 03:43:32 point_skyscan result=0 03:43:33 Check angles 03:43:33 SkyScan query 03:43:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.935<-21529 Statuses=0008 0009 03:43:34 Msec=0 True Az=112.995 Ze=-142.935 Az status=0008 Ze status=0009 03:43:34 Check angles 03:43:34 SkyScan query 03:43:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.53<-20102 Statuses=0008 0009 03:43:34 Msec=750 True Az=112.995 Ze=-121.53 Az status=0008 Ze status=0009 03:43:34 Check angles 03:43:34 SkyScan query 03:43:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.575<-18705 Statuses=0008 0009 03:43:35 Msec=1500 True Az=112.995 Ze=-100.575 Az status=0008 Ze status=0009 03:43:35 Check angles 03:43:35 SkyScan query 03:43:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.605<-17307 Statuses=0008 0009 03:43:36 Msec=2250 True Az=112.995 Ze=-79.605 Az status=0008 Ze status=0009 03:43:36 Check angles 03:43:36 SkyScan query 03:43:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.65<-15910 Statuses=0008 0009 03:43:37 Msec=3000 True Az=112.995 Ze=-58.65 Az status=0008 Ze status=0009 03:43:37 Check angles 03:43:37 SkyScan query 03:43:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.71<-14514 Statuses=0008 0009 03:43:37 Msec=3750 True Az=112.995 Ze=-37.71 Az status=0008 Ze status=0009 03:43:37 Check angles 03:43:37 SkyScan query 03:43:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.755<-13117 Statuses=0008 0009 03:43:38 Msec=4500 True Az=112.995 Ze=-16.755 Az status=0008 Ze status=0009 03:43:38 Check angles 03:43:38 SkyScan query 03:43:39 SkyScan query done: ret=0 az=112.995<-7533 ze=4.17<-11722 Statuses=0008 0009 03:43:39 Msec=5250 True Az=112.995 Ze=4.17 Az status=0008 Ze status=0009 03:43:39 Check angles 03:43:39 SkyScan query 03:43:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:43:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:43:40 Message to Master queued w/err=0: serial=110791 error=0 03:43:45 Received message from Master: op=Filter serial=110792 03:43:45 Color wheel filter change from 0 to 0 03:43:45 FLIGetFilterPos err=0 currentPosition=0 03:43:45 FLIGetStepsRemaining err=0 RemainingSteps=0 03:43:45 Filter is already there-color wheel unchanged 03:43:45 Received message from Master: op=Shutter serial=110793 03:43:45 Shutter LASER close 03:43:45 Received message from Camera: op=State serial=110795 03:43:45 GetSingleValue result=40 Value=cccccccc 03:43:45 SkyScan query 03:43:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:43:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:45 Parameters OK 03:43:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:45 Set A/D data flow result=40 03:43:45 Set A/D channel type result=40 03:43:45 Set A/D encoding result=40 03:43:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:45 Set channel filter=0.000000e+000 result=40 03:43:45 Config A/D Result=40 03:43:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:45 Get A/D filter: -9.255963e+061 result=40 03:43:45 Get A/D value=-858993460 result=40 03:43:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:45 Parameters OK 03:43:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:45 Set A/D data flow result=40 03:43:45 Set A/D channel type result=40 03:43:45 Set A/D encoding result=40 03:43:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:45 Set channel filter=0.000000e+000 result=40 03:43:45 Config A/D Result=40 03:43:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:45 Get A/D filter: -9.255963e+061 result=40 03:43:45 Get A/D value=-858993460 result=40 03:43:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:43:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:43:45 Aux= 03:43:45 Message to Camera, serial 110795 queued [UTC 2019-3-5 03:43:50] 03:44:22 Received message from Master: op=PointingHead serial=110808 03:44:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:44:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:44:23 Point started: ret=0 03:44:23 point_skyscan result=0 03:44:23 Check angles 03:44:23 SkyScan query 03:44:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:44:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:44:24 Message to Master queued w/err=0: serial=110808 error=0 03:44:29 Received message from Master: op=Filter serial=110809 03:44:29 Color wheel filter change from 0 to 0 03:44:29 FLIGetFilterPos err=0 currentPosition=0 03:44:29 FLIGetStepsRemaining err=0 RemainingSteps=0 03:44:29 Filter is already there-color wheel unchanged 03:44:29 Received message from Master: op=Shutter serial=110810 03:44:29 Shutter LASER close 03:44:29 Received message from Camera: op=State serial=110812 03:44:29 GetSingleValue result=40 Value=cccccccc 03:44:29 SkyScan query 03:44:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:44:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:30 Parameters OK 03:44:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:30 Set A/D data flow result=40 03:44:30 Set A/D channel type result=40 03:44:30 Set A/D encoding result=40 03:44:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:30 Set channel filter=0.000000e+000 result=40 03:44:30 Config A/D Result=40 03:44:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:30 Get A/D filter: -9.255963e+061 result=40 03:44:30 Get A/D value=-858993460 result=40 03:44:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:30 Parameters OK 03:44:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:30 Set A/D data flow result=40 03:44:30 Set A/D channel type result=40 03:44:30 Set A/D encoding result=40 03:44:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:30 Set channel filter=0.000000e+000 result=40 03:44:30 Config A/D Result=40 03:44:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:30 Get A/D filter: -9.255963e+061 result=40 03:44:30 Get A/D value=-858993460 result=40 03:44:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:44:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:44:30 Aux= 03:44:30 Message to Camera, serial 110812 queued 03:45:07 Received message from Master: op=PointingHead serial=110825 03:45:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:45:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:45:07 Point started: ret=0 03:45:07 point_skyscan result=0 03:45:08 Check angles 03:45:08 SkyScan query 03:45:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:45:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:45:08 Message to Master queued w/err=0: serial=110825 error=0 03:45:13 Received message from Master: op=Filter serial=110826 03:45:13 Color wheel filter change from 0 to 0 03:45:13 FLIGetFilterPos err=0 currentPosition=0 03:45:13 FLIGetStepsRemaining err=0 RemainingSteps=0 03:45:13 Filter is already there-color wheel unchanged 03:45:14 Received message from Master: op=Shutter serial=110827 03:45:14 Shutter LASER close 03:45:14 Received message from Camera: op=State serial=110829 03:45:14 GetSingleValue result=40 Value=cccccccc 03:45:14 SkyScan query 03:45:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:45:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:14 Parameters OK 03:45:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:14 Set A/D data flow result=40 03:45:14 Set A/D channel type result=40 03:45:14 Set A/D encoding result=40 03:45:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:14 Set channel filter=0.000000e+000 result=40 03:45:14 Config A/D Result=40 03:45:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:14 Get A/D filter: -9.255963e+061 result=40 03:45:14 Get A/D value=-858993460 result=40 03:45:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:14 Parameters OK 03:45:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:14 Set A/D data flow result=40 03:45:14 Set A/D channel type result=40 03:45:14 Set A/D encoding result=40 03:45:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:14 Set channel filter=0.000000e+000 result=40 03:45:14 Config A/D Result=40 03:45:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:14 Get A/D filter: -9.255963e+061 result=40 03:45:14 Get A/D value=-858993460 result=40 03:45:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:45:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:45:14 Aux= 03:45:14 Message to Camera, serial 110829 queued 03:45:51 Received message from Master: op=PointingHead serial=110842 03:45:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:45:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:45:51 Point started: ret=0 03:45:51 point_skyscan result=0 03:45:52 Check angles 03:45:52 SkyScan query 03:45:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:45:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:45:53 Message to Master queued w/err=0: serial=110842 error=0 03:45:58 Received message from Master: op=Filter serial=110843 03:45:58 Color wheel filter change from 0 to 0 03:45:58 FLIGetFilterPos err=0 currentPosition=0 03:45:58 FLIGetStepsRemaining err=0 RemainingSteps=0 03:45:58 Filter is already there-color wheel unchanged 03:45:58 Received message from Master: op=Shutter serial=110844 03:45:58 Shutter LASER close 03:45:58 Received message from Camera: op=State serial=110846 03:45:58 GetSingleValue result=40 Value=cccccccc 03:45:58 SkyScan query 03:45:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:45:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:58 Parameters OK 03:45:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:58 Set A/D data flow result=40 03:45:58 Set A/D channel type result=40 03:45:58 Set A/D encoding result=40 03:45:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:58 Set channel filter=0.000000e+000 result=40 03:45:58 Config A/D Result=40 03:45:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:58 Get A/D filter: -9.255963e+061 result=40 03:45:58 Get A/D value=-858993460 result=40 03:45:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:58 Parameters OK 03:45:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:58 Set A/D data flow result=40 03:45:58 Set A/D channel type result=40 03:45:58 Set A/D encoding result=40 03:45:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:58 Set channel filter=0.000000e+000 result=40 03:45:58 Config A/D Result=40 03:45:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:58 Get A/D filter: -9.255963e+061 result=40 03:45:58 Get A/D value=-858993460 result=40 03:45:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:45:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:45:58 Aux= 03:45:58 Message to Camera, serial 110846 queued 03:46:35 Received message from Master: op=PointingHead serial=110859 03:46:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:46:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:46:36 Point started: ret=0 03:46:36 point_skyscan result=0 03:46:36 Check angles 03:46:36 SkyScan query 03:46:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 03:46:37 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 03:46:37 Check angles 03:46:37 SkyScan query 03:46:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.295<-14953 Statuses=0008 0009 03:46:38 Msec=750 True Az=112.995 Ze=-44.295 Az status=0008 Ze status=0009 03:46:38 Check angles 03:46:38 SkyScan query 03:46:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.67<-16378 Statuses=0008 0009 03:46:38 Msec=1500 True Az=112.995 Ze=-65.67 Az status=0008 Ze status=0009 03:46:39 Check angles 03:46:39 SkyScan query 03:46:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 03:46:39 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 03:46:39 Check angles 03:46:39 SkyScan query 03:46:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.58<-19172 Statuses=0008 0009 03:46:40 Msec=3000 True Az=112.995 Ze=-107.58 Az status=0008 Ze status=0009 03:46:40 Check angles 03:46:40 SkyScan query 03:46:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.52<-20568 Statuses=0008 0009 03:46:41 Msec=3750 True Az=112.995 Ze=-128.52 Az status=0008 Ze status=0009 03:46:41 Check angles 03:46:41 SkyScan query 03:46:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.505<-21967 Statuses=0008 0009 03:46:41 Msec=4500 True Az=112.995 Ze=-149.505 Az status=0008 Ze status=0009 03:46:42 Check angles 03:46:42 SkyScan query 03:46:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.415<-23361 Statuses=0008 0009 03:46:42 Msec=5250 True Az=112.995 Ze=-170.415 Az status=0008 Ze status=0009 03:46:42 Check angles 03:46:42 SkyScan query 03:46:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:46:43 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:46:43 Message to Master queued w/err=0: serial=110859 error=0 03:46:48 Received message from Master: op=Filter serial=110860 03:46:48 Color wheel filter change from 0 to 0 03:46:48 FLIGetFilterPos err=0 currentPosition=0 03:46:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:46:48 Filter is already there-color wheel unchanged 03:46:48 Received message from Master: op=Shutter serial=110861 03:46:48 Shutter LASER open 03:46:48 Received message from Camera: op=State serial=110863 03:46:48 GetSingleValue result=40 Value=cccccccc 03:46:48 SkyScan query 03:46:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:46:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:49 Parameters OK 03:46:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:49 Set A/D data flow result=40 03:46:49 Set A/D channel type result=40 03:46:49 Set A/D encoding result=40 03:46:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:49 Set channel filter=0.000000e+000 result=40 03:46:49 Config A/D Result=40 03:46:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:49 Get A/D filter: -9.255963e+061 result=40 03:46:49 Get A/D value=-858993460 result=40 03:46:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:49 Parameters OK 03:46:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:49 Set A/D data flow result=40 03:46:49 Set A/D channel type result=40 03:46:49 Set A/D encoding result=40 03:46:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:49 Set channel filter=0.000000e+000 result=40 03:46:49 Config A/D Result=40 03:46:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:49 Get A/D filter: -9.255963e+061 result=40 03:46:49 Get A/D value=-858993460 result=40 03:46:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:46:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:46:49 Aux= 03:46:49 Message to Camera, serial 110863 queued 03:46:57 Received message from Master: op=Shutter serial=110873 03:46:57 Shutter LASER close 03:46:58 Received message from Master: op=PointingHead serial=110877 03:46:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:46:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:46:58 Point started: ret=0 03:46:58 point_skyscan result=0 03:46:59 Check angles 03:46:59 SkyScan query 03:47:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 03:47:00 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 03:47:00 Check angles 03:47:00 SkyScan query 03:47:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 03:47:00 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 03:47:00 Check angles 03:47:00 SkyScan query 03:47:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.085<-18739 Statuses=0008 0009 03:47:01 Msec=1500 True Az=112.995 Ze=-101.085 Az status=0008 Ze status=0009 03:47:01 Check angles 03:47:01 SkyScan query 03:47:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 03:47:02 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 03:47:02 Check angles 03:47:02 SkyScan query 03:47:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.175<-15945 Statuses=0008 0009 03:47:03 Msec=3000 True Az=112.995 Ze=-59.175 Az status=0008 Ze status=0009 03:47:03 Check angles 03:47:03 SkyScan query 03:47:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.22<-14548 Statuses=0008 0009 03:47:03 Msec=3750 True Az=112.995 Ze=-38.22 Az status=0008 Ze status=0009 03:47:03 Check angles 03:47:03 SkyScan query 03:47:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 03:47:04 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 03:47:04 Check angles 03:47:04 SkyScan query 03:47:05 SkyScan query done: ret=0 az=112.995<-7533 ze=3.66<-11756 Statuses=0008 0009 03:47:05 Msec=5250 True Az=112.995 Ze=3.66 Az status=0008 Ze status=0009 03:47:05 Check angles 03:47:05 SkyScan query 03:47:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:47:06 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:47:06 Message to Master queued w/err=0: serial=110877 error=0 03:47:11 Received message from Master: op=Filter serial=110878 03:47:11 Color wheel filter change from 0 to 0 03:47:11 FLIGetFilterPos err=0 currentPosition=0 03:47:11 FLIGetStepsRemaining err=0 RemainingSteps=0 03:47:11 Filter is already there-color wheel unchanged 03:47:11 Received message from Master: op=Shutter serial=110879 03:47:11 Shutter LASER close 03:47:11 Received message from Camera: op=State serial=110881 03:47:11 GetSingleValue result=40 Value=cccccccc 03:47:11 SkyScan query 03:47:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:47:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:11 Parameters OK 03:47:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:11 Set A/D data flow result=40 03:47:11 Set A/D channel type result=40 03:47:11 Set A/D encoding result=40 03:47:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:11 Set channel filter=0.000000e+000 result=40 03:47:11 Config A/D Result=40 03:47:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:11 Get A/D filter: -9.255963e+061 result=40 03:47:11 Get A/D value=-858993460 result=40 03:47:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:11 Parameters OK 03:47:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:11 Set A/D data flow result=40 03:47:11 Set A/D channel type result=40 03:47:11 Set A/D encoding result=40 03:47:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:11 Set channel filter=0.000000e+000 result=40 03:47:11 Config A/D Result=40 03:47:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:11 Get A/D filter: -9.255963e+061 result=40 03:47:11 Get A/D value=-858993460 result=40 03:47:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:47:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:47:11 Aux= 03:47:11 Message to Camera, serial 110881 queued 03:47:48 Received message from Master: op=PointingHead serial=110894 03:47:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:47:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:47:49 Point started: ret=0 03:47:49 point_skyscan result=0 03:47:49 Check angles 03:47:49 SkyScan query 03:47:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:47:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:47:50 Message to Master queued w/err=0: serial=110894 error=0 03:47:55 Received message from Master: op=Filter serial=110895 03:47:55 Color wheel filter change from 0 to 0 03:47:55 FLIGetFilterPos err=0 currentPosition=0 03:47:55 FLIGetStepsRemaining err=0 RemainingSteps=0 03:47:55 Filter is already there-color wheel unchanged 03:47:55 Received message from Master: op=Shutter serial=110896 03:47:55 Shutter LASER close 03:47:55 Received message from Camera: op=State serial=110898 03:47:55 GetSingleValue result=40 Value=cccccccc 03:47:55 SkyScan query 03:47:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:47:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:56 Parameters OK 03:47:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:56 Set A/D data flow result=40 03:47:56 Set A/D channel type result=40 03:47:56 Set A/D encoding result=40 03:47:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:56 Set channel filter=0.000000e+000 result=40 03:47:56 Config A/D Result=40 03:47:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:56 Get A/D filter: -9.255963e+061 result=40 03:47:56 Get A/D value=-858993460 result=40 03:47:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:56 Parameters OK 03:47:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:56 Set A/D data flow result=40 03:47:56 Set A/D channel type result=40 03:47:56 Set A/D encoding result=40 03:47:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:56 Set channel filter=0.000000e+000 result=40 03:47:56 Config A/D Result=40 03:47:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:56 Get A/D filter: -9.255963e+061 result=40 03:47:56 Get A/D value=-858993460 result=40 03:47:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:47:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:47:56 Aux= 03:47:56 Message to Camera, serial 110898 queued 03:48:33 Received message from Master: op=PointingHead serial=110911 03:48:33 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:48:33 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:48:33 Point started: ret=0 03:48:33 point_skyscan result=0 03:48:34 Check angles 03:48:34 SkyScan query 03:48:34 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 03:48:34 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 03:48:34 Check angles 03:48:34 SkyScan query 03:48:35 SkyScan query done: ret=0 az=153.6<-10240 ze=-6.495<-12433 Statuses=0009 0008 03:48:35 Msec=750 True Az=153.6 Ze=-6.495 Az status=0009 Ze status=0008 03:48:35 Check angles 03:48:35 SkyScan query 03:48:36 SkyScan query done: ret=0 az=171.045<-11403 ze=-6.495<-12433 Statuses=0009 0008 03:48:36 Msec=1500 True Az=171.045 Ze=-6.495 Az status=0009 Ze status=0008 03:48:36 Check angles 03:48:36 SkyScan query 03:48:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:48:37 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 03:48:37 Message to Master queued w/err=0: serial=110911 error=0 03:48:42 Received message from Master: op=Filter serial=110912 03:48:42 Color wheel filter change from 0 to 0 03:48:42 FLIGetFilterPos err=0 currentPosition=0 03:48:42 FLIGetStepsRemaining err=0 RemainingSteps=0 03:48:42 Filter is already there-color wheel unchanged 03:48:42 Received message from Master: op=Shutter serial=110913 03:48:42 Shutter LASER close 03:48:42 Received message from Camera: op=State serial=110915 03:48:42 GetSingleValue result=40 Value=cccccccc 03:48:42 SkyScan query 03:48:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:48:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:42 Parameters OK 03:48:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:42 Set A/D data flow result=40 03:48:42 Set A/D channel type result=40 03:48:42 Set A/D encoding result=40 03:48:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:42 Set channel filter=0.000000e+000 result=40 03:48:42 Config A/D Result=40 03:48:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:42 Get A/D filter: -9.255963e+061 result=40 03:48:42 Get A/D value=-858993460 result=40 03:48:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:42 Parameters OK 03:48:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:42 Set A/D data flow result=40 03:48:42 Set A/D channel type result=40 03:48:42 Set A/D encoding result=40 03:48:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:42 Set channel filter=0.000000e+000 result=40 03:48:42 Config A/D Result=40 03:48:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:42 Get A/D filter: -9.255963e+061 result=40 03:48:42 Get A/D value=-858993460 result=40 03:48:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:48:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:48:42 Aux= 03:48:42 Message to Camera, serial 110915 queued 03:49:18 Received message from Master: op=PointingHead serial=110927 03:49:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:49:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:49:19 Point started: ret=0 03:49:19 point_skyscan result=0 03:49:19 Check angles 03:49:19 SkyScan query 03:49:20 SkyScan query done: ret=0 az=153.24<-10216 ze=6.51<-11566 Statuses=0009 0008 03:49:20 Msec=0 True Az=153.24 Ze=6.51 Az status=0009 Ze status=0008 03:49:20 Check angles 03:49:20 SkyScan query 03:49:21 SkyScan query done: ret=0 az=135.69<-9046 ze=6.495<-11567 Statuses=0009 0008 03:49:21 Msec=750 True Az=135.69 Ze=6.495 Az status=0009 Ze status=0008 03:49:21 Check angles 03:49:21 SkyScan query 03:49:21 SkyScan query done: ret=0 az=118.275<-7885 ze=6.495<-11567 Statuses=0009 0008 03:49:21 Msec=1500 True Az=118.275 Ze=6.495 Az status=0009 Ze status=0008 03:49:22 Check angles 03:49:22 SkyScan query 03:49:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:49:22 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:49:22 Message to Master queued w/err=0: serial=110927 error=0 03:49:27 Received message from Master: op=Filter serial=110928 03:49:27 Color wheel filter change from 0 to 0 03:49:27 FLIGetFilterPos err=0 currentPosition=0 03:49:27 FLIGetStepsRemaining err=0 RemainingSteps=0 03:49:27 Filter is already there-color wheel unchanged 03:49:27 Received message from Master: op=Shutter serial=110929 03:49:27 Shutter LASER close 03:49:27 Received message from Camera: op=State serial=110931 03:49:27 GetSingleValue result=40 Value=cccccccc 03:49:27 SkyScan query 03:49:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:49:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:28 Parameters OK 03:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:28 Set A/D data flow result=40 03:49:28 Set A/D channel type result=40 03:49:28 Set A/D encoding result=40 03:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:28 Set channel filter=0.000000e+000 result=40 03:49:28 Config A/D Result=40 03:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:28 Get A/D filter: -9.255963e+061 result=40 03:49:28 Get A/D value=-858993460 result=40 03:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:28 Parameters OK 03:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:28 Set A/D data flow result=40 03:49:28 Set A/D channel type result=40 03:49:28 Set A/D encoding result=40 03:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:28 Set channel filter=0.000000e+000 result=40 03:49:28 Config A/D Result=40 03:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:28 Get A/D filter: -9.255963e+061 result=40 03:49:28 Get A/D value=-858993460 result=40 03:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:49:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:49:28 Aux= 03:49:28 Message to Camera, serial 110931 queued 03:50:05 Received message from Master: op=PointingHead serial=110944 03:50:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:50:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:50:05 Point started: ret=0 03:50:05 point_skyscan result=0 03:50:06 Check angles 03:50:06 SkyScan query 03:50:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 03:50:06 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 03:50:07 Check angles 03:50:07 SkyScan query 03:50:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 03:50:07 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 03:50:07 Check angles 03:50:07 SkyScan query 03:50:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 03:50:08 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 03:50:08 Check angles 03:50:08 SkyScan query 03:50:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 03:50:09 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 03:50:09 Check angles 03:50:09 SkyScan query 03:50:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.565<-19171 Statuses=0008 0009 03:50:09 Msec=3000 True Az=112.995 Ze=-107.565 Az status=0008 Ze status=0009 03:50:10 Check angles 03:50:10 SkyScan query 03:50:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.49<-20566 Statuses=0008 0009 03:50:10 Msec=3750 True Az=112.995 Ze=-128.49 Az status=0008 Ze status=0009 03:50:10 Check angles 03:50:10 SkyScan query 03:50:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.895<-21993 Statuses=0008 0009 03:50:11 Msec=4500 True Az=112.995 Ze=-149.895 Az status=0008 Ze status=0009 03:50:11 Check angles 03:50:11 SkyScan query 03:50:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.105<-23407 Statuses=0008 0009 03:50:12 Msec=5250 True Az=112.995 Ze=-171.105 Az status=0008 Ze status=0009 03:50:12 Check angles 03:50:12 SkyScan query 03:50:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:50:13 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:50:13 Message to Master queued w/err=0: serial=110944 error=0 03:50:18 Received message from Master: op=Filter serial=110945 03:50:18 Color wheel filter change from 0 to 0 03:50:18 FLIGetFilterPos err=0 currentPosition=0 03:50:18 FLIGetStepsRemaining err=0 RemainingSteps=0 03:50:18 Filter is already there-color wheel unchanged 03:50:18 Received message from Master: op=Shutter serial=110946 03:50:18 Shutter LASER open 03:50:18 Received message from Camera: op=State serial=110948 03:50:18 GetSingleValue result=40 Value=cccccccc 03:50:18 SkyScan query 03:50:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:50:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:18 Parameters OK 03:50:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:18 Set A/D data flow result=40 03:50:18 Set A/D channel type result=40 03:50:18 Set A/D encoding result=40 03:50:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:18 Set channel filter=0.000000e+000 result=40 03:50:18 Config A/D Result=40 03:50:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:18 Get A/D filter: -9.255963e+061 result=40 03:50:18 Get A/D value=-858993460 result=40 03:50:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:18 Parameters OK 03:50:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:18 Set A/D data flow result=40 03:50:18 Set A/D channel type result=40 03:50:18 Set A/D encoding result=40 03:50:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:18 Set channel filter=0.000000e+000 result=40 03:50:18 Config A/D Result=40 03:50:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:18 Get A/D filter: -9.255963e+061 result=40 03:50:18 Get A/D value=-858993460 result=40 03:50:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:50:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:50:18 Aux= 03:50:18 Message to Camera, serial 110948 queued 03:50:27 Received message from Master: op=Shutter serial=110958 03:50:27 Shutter LASER close 03:50:27 Received message from Master: op=PointingHead serial=110962 03:50:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:50:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:50:28 Point started: ret=0 03:50:28 point_skyscan result=0 03:50:28 Check angles 03:50:28 SkyScan query 03:50:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 03:50:29 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 03:50:29 Check angles 03:50:29 SkyScan query 03:50:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 03:50:30 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 03:50:30 Check angles 03:50:30 SkyScan query 03:50:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.47<-18698 Statuses=0008 0009 03:50:31 Msec=1500 True Az=112.995 Ze=-100.47 Az status=0008 Ze status=0009 03:50:31 Check angles 03:50:31 SkyScan query 03:50:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.515<-17301 Statuses=0008 0009 03:50:31 Msec=2250 True Az=112.995 Ze=-79.515 Az status=0008 Ze status=0009 03:50:31 Check angles 03:50:31 SkyScan query 03:50:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.095<-15873 Statuses=0008 0009 03:50:32 Msec=3000 True Az=112.995 Ze=-58.095 Az status=0008 Ze status=0009 03:50:32 Check angles 03:50:32 SkyScan query 03:50:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.75<-14450 Statuses=0008 0009 03:50:33 Msec=3750 True Az=112.995 Ze=-36.75 Az status=0008 Ze status=0009 03:50:33 Check angles 03:50:33 SkyScan query 03:50:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.765<-13051 Statuses=0008 0009 03:50:34 Msec=4500 True Az=112.995 Ze=-15.765 Az status=0008 Ze status=0009 03:50:34 Check angles 03:50:34 SkyScan query 03:50:34 SkyScan query done: ret=0 az=112.995<-7533 ze=4.92<-11672 Statuses=0008 0009 03:50:34 Msec=5250 True Az=112.995 Ze=4.92 Az status=0008 Ze status=0009 03:50:34 Check angles 03:50:34 SkyScan query 03:50:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:50:35 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:50:35 Message to Master queued w/err=0: serial=110962 error=0 03:50:40 Received message from Master: op=Filter serial=110963 03:50:40 Color wheel filter change from 0 to 0 03:50:40 FLIGetFilterPos err=0 currentPosition=0 03:50:40 FLIGetStepsRemaining err=0 RemainingSteps=0 03:50:40 Filter is already there-color wheel unchanged 03:50:40 Received message from Master: op=Shutter serial=110964 03:50:40 Shutter LASER close 03:50:40 Received message from Camera: op=State serial=110966 03:50:40 GetSingleValue result=40 Value=cccccccc 03:50:40 SkyScan query 03:50:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:50:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:41 Parameters OK 03:50:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:41 Set A/D data flow result=40 03:50:41 Set A/D channel type result=40 03:50:41 Set A/D encoding result=40 03:50:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:41 Set channel filter=0.000000e+000 result=40 03:50:41 Config A/D Result=40 03:50:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:41 Get A/D filter: -9.255963e+061 result=40 03:50:41 Get A/D value=-858993460 result=40 03:50:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:41 Parameters OK 03:50:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:41 Set A/D data flow result=40 03:50:41 Set A/D channel type result=40 03:50:41 Set A/D encoding result=40 03:50:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:41 Set channel filter=0.000000e+000 result=40 03:50:41 Config A/D Result=40 03:50:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:41 Get A/D filter: -9.255963e+061 result=40 03:50:41 Get A/D value=-858993460 result=40 03:50:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:50:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:50:41 Aux= 03:50:41 Message to Camera, serial 110966 queued 03:51:18 Received message from Master: op=PointingHead serial=110979 03:51:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:51:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:51:18 Point started: ret=0 03:51:18 point_skyscan result=0 03:51:19 Check angles 03:51:19 SkyScan query 03:51:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:51:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:51:19 Message to Master queued w/err=0: serial=110979 error=0 03:51:24 Received message from Master: op=Filter serial=110980 03:51:24 Color wheel filter change from 0 to 0 03:51:24 FLIGetFilterPos err=0 currentPosition=0 03:51:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:51:24 Filter is already there-color wheel unchanged 03:51:25 Received message from Master: op=Shutter serial=110981 03:51:25 Shutter LASER close 03:51:25 Received message from Camera: op=State serial=110983 03:51:25 GetSingleValue result=40 Value=cccccccc 03:51:25 SkyScan query 03:51:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:51:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:25 Parameters OK 03:51:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:25 Set A/D data flow result=40 03:51:25 Set A/D channel type result=40 03:51:25 Set A/D encoding result=40 03:51:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:25 Set channel filter=0.000000e+000 result=40 03:51:25 Config A/D Result=40 03:51:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:25 Get A/D filter: -9.255963e+061 result=40 03:51:25 Get A/D value=-858993460 result=40 03:51:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:25 Parameters OK 03:51:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:25 Set A/D data flow result=40 03:51:25 Set A/D channel type result=40 03:51:25 Set A/D encoding result=40 03:51:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:25 Set channel filter=0.000000e+000 result=40 03:51:25 Config A/D Result=40 03:51:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:25 Get A/D filter: -9.255963e+061 result=40 03:51:25 Get A/D value=-858993460 result=40 03:51:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:51:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:51:25 Aux= 03:51:25 Message to Camera, serial 110983 queued 03:52:02 Received message from Master: op=PointingHead serial=110996 03:52:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:52:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:52:02 Point started: ret=0 03:52:02 point_skyscan result=0 03:52:03 Check angles 03:52:03 SkyScan query 03:52:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:52:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:52:04 Message to Master queued w/err=0: serial=110996 error=0 03:52:09 Received message from Master: op=Filter serial=110997 03:52:09 Color wheel filter change from 0 to 0 03:52:09 FLIGetFilterPos err=0 currentPosition=0 03:52:09 FLIGetStepsRemaining err=0 RemainingSteps=0 03:52:09 Filter is already there-color wheel unchanged 03:52:09 Received message from Master: op=Shutter serial=110998 03:52:09 Shutter LASER close 03:52:09 Received message from Camera: op=State serial=111000 03:52:09 GetSingleValue result=40 Value=cccccccc 03:52:09 SkyScan query 03:52:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:52:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:10 Parameters OK 03:52:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:10 Set A/D data flow result=40 03:52:10 Set A/D channel type result=40 03:52:10 Set A/D encoding result=40 03:52:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:10 Set channel filter=0.000000e+000 result=40 03:52:10 Config A/D Result=40 03:52:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:10 Get A/D filter: -9.255963e+061 result=40 03:52:10 Get A/D value=-858993460 result=40 03:52:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:10 Parameters OK 03:52:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:10 Set A/D data flow result=40 03:52:10 Set A/D channel type result=40 03:52:10 Set A/D encoding result=40 03:52:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:10 Set channel filter=0.000000e+000 result=40 03:52:10 Config A/D Result=40 03:52:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:10 Get A/D filter: -9.255963e+061 result=40 03:52:10 Get A/D value=-858993460 result=40 03:52:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:52:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:52:10 Aux= 03:52:10 Message to Camera, serial 111000 queued 03:52:46 Received message from Master: op=PointingHead serial=111013 03:52:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:52:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:52:47 Point started: ret=0 03:52:47 point_skyscan result=0 03:52:47 Check angles 03:52:47 SkyScan query 03:52:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:52:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:52:48 Message to Master queued w/err=0: serial=111013 error=0 03:52:53 Received message from Master: op=Filter serial=111014 03:52:53 Color wheel filter change from 0 to 0 03:52:53 FLIGetFilterPos err=0 currentPosition=0 03:52:53 FLIGetStepsRemaining err=0 RemainingSteps=0 03:52:53 Filter is already there-color wheel unchanged 03:52:53 Received message from Master: op=Shutter serial=111015 03:52:53 Shutter LASER close 03:52:53 Received message from Camera: op=State serial=111017 03:52:53 GetSingleValue result=40 Value=cccccccc 03:52:53 SkyScan query 03:52:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:52:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:54 Parameters OK 03:52:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:54 Set A/D data flow result=40 03:52:54 Set A/D channel type result=40 03:52:54 Set A/D encoding result=40 03:52:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:54 Set channel filter=0.000000e+000 result=40 03:52:54 Config A/D Result=40 03:52:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:54 Get A/D filter: -9.255963e+061 result=40 03:52:54 Get A/D value=-858993460 result=40 03:52:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:54 Parameters OK 03:52:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:54 Set A/D data flow result=40 03:52:54 Set A/D channel type result=40 03:52:54 Set A/D encoding result=40 03:52:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:54 Set channel filter=0.000000e+000 result=40 03:52:54 Config A/D Result=40 03:52:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:54 Get A/D filter: -9.255963e+061 result=40 03:52:54 Get A/D value=-858993460 result=40 03:52:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:52:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:52:54 Aux= 03:52:54 Message to Camera, serial 111017 queued 03:53:31 Received message from Master: op=PointingHead serial=111030 03:53:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:53:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:53:31 Point started: ret=0 03:53:31 point_skyscan result=0 03:53:32 Check angles 03:53:32 SkyScan query 03:53:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 03:53:32 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 03:53:33 Check angles 03:53:33 SkyScan query 03:53:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.58<-14972 Statuses=0008 0009 03:53:33 Msec=750 True Az=112.995 Ze=-44.58 Az status=0008 Ze status=0009 03:53:33 Check angles 03:53:33 SkyScan query 03:53:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.535<-16369 Statuses=0008 0009 03:53:34 Msec=1500 True Az=112.995 Ze=-65.535 Az status=0008 Ze status=0009 03:53:34 Check angles 03:53:34 SkyScan query 03:53:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.49<-17766 Statuses=0008 0009 03:53:35 Msec=2250 True Az=112.995 Ze=-86.49 Az status=0008 Ze status=0009 03:53:35 Check angles 03:53:35 SkyScan query 03:53:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.445<-19163 Statuses=0008 0009 03:53:35 Msec=3000 True Az=112.995 Ze=-107.445 Az status=0008 Ze status=0009 03:53:36 Check angles 03:53:36 SkyScan query 03:53:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.4<-20560 Statuses=0008 0009 03:53:36 Msec=3750 True Az=112.995 Ze=-128.4 Az status=0008 Ze status=0009 03:53:36 Check angles 03:53:36 SkyScan query 03:53:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.34<-21956 Statuses=0008 0009 03:53:37 Msec=4500 True Az=112.995 Ze=-149.34 Az status=0008 Ze status=0009 03:53:37 Check angles 03:53:37 SkyScan query 03:53:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.28<-23352 Statuses=0008 0009 03:53:38 Msec=5250 True Az=112.995 Ze=-170.28 Az status=0008 Ze status=0009 03:53:38 Check angles 03:53:38 SkyScan query 03:53:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:53:38 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:53:38 Message to Master queued w/err=0: serial=111030 error=0 03:53:43 Received message from Master: op=Filter serial=111031 03:53:43 Color wheel filter change from 0 to 0 03:53:43 FLIGetFilterPos err=0 currentPosition=0 03:53:43 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:43 Filter is already there-color wheel unchanged 03:53:44 Received message from Master: op=Shutter serial=111032 03:53:44 Shutter LASER open 03:53:44 Received message from Camera: op=State serial=111034 03:53:44 GetSingleValue result=40 Value=cccccccc 03:53:44 SkyScan query 03:53:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:53:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:44 Parameters OK 03:53:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:44 Set A/D data flow result=40 03:53:44 Set A/D channel type result=40 03:53:44 Set A/D encoding result=40 03:53:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:44 Set channel filter=0.000000e+000 result=40 03:53:44 Config A/D Result=40 03:53:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:44 Get A/D filter: -9.255963e+061 result=40 03:53:44 Get A/D value=-858993460 result=40 03:53:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:44 Parameters OK 03:53:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:44 Set A/D data flow result=40 03:53:44 Set A/D channel type result=40 03:53:44 Set A/D encoding result=40 03:53:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:44 Set channel filter=0.000000e+000 result=40 03:53:44 Config A/D Result=40 03:53:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:44 Get A/D filter: -9.255963e+061 result=40 03:53:44 Get A/D value=-858993460 result=40 03:53:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:44 Aux= 03:53:44 Message to Camera, serial 111034 queued 03:53:52 Received message from Master: op=Shutter serial=111043 03:53:52 Shutter LASER close 03:53:52 Received message from Master: op=PointingHead serial=111047 03:53:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:53:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:53:53 Point started: ret=0 03:53:53 point_skyscan result=0 03:53:53 Check angles 03:53:53 SkyScan query 03:53:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.13<-21542 Statuses=0008 0009 03:53:54 Msec=0 True Az=112.995 Ze=-143.13 Az status=0008 Ze status=0009 03:53:54 Check angles 03:53:54 SkyScan query 03:53:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.175<-20145 Statuses=0008 0009 03:53:55 Msec=750 True Az=112.995 Ze=-122.175 Az status=0008 Ze status=0009 03:53:55 Check angles 03:53:55 SkyScan query 03:53:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.22<-18748 Statuses=0008 0009 03:53:56 Msec=1500 True Az=112.995 Ze=-101.22 Az status=0008 Ze status=0009 03:53:56 Check angles 03:53:56 SkyScan query 03:53:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.265<-17351 Statuses=0008 0009 03:53:56 Msec=2250 True Az=112.995 Ze=-80.265 Az status=0008 Ze status=0009 03:53:56 Check angles 03:53:56 SkyScan query 03:53:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.325<-15955 Statuses=0008 0009 03:53:57 Msec=3000 True Az=112.995 Ze=-59.325 Az status=0008 Ze status=0009 03:53:57 Check angles 03:53:57 SkyScan query 03:53:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.34<-14556 Statuses=0008 0009 03:53:58 Msec=3750 True Az=112.995 Ze=-38.34 Az status=0008 Ze status=0009 03:53:58 Check angles 03:53:58 SkyScan query 03:53:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.4<-13160 Statuses=0008 0009 03:53:59 Msec=4500 True Az=112.995 Ze=-17.4 Az status=0008 Ze status=0009 03:53:59 Check angles 03:53:59 SkyScan query 03:53:59 SkyScan query done: ret=0 az=112.995<-7533 ze=3.57<-11762 Statuses=0008 0009 03:53:59 Msec=5250 True Az=112.995 Ze=3.57 Az status=0008 Ze status=0009 03:53:59 Check angles 03:53:59 SkyScan query 03:54:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:54:00 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:54:00 Message to Master queued w/err=0: serial=111047 error=0 03:54:05 Received message from Master: op=Filter serial=111048 03:54:05 Color wheel filter change from 0 to 0 03:54:05 FLIGetFilterPos err=0 currentPosition=0 03:54:05 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:05 Filter is already there-color wheel unchanged 03:54:05 Received message from Master: op=Shutter serial=111049 03:54:05 Shutter LASER close 03:54:05 Received message from Camera: op=State serial=111051 03:54:05 GetSingleValue result=40 Value=cccccccc 03:54:05 SkyScan query 03:54:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:54:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:06 Parameters OK 03:54:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:06 Set A/D data flow result=40 03:54:06 Set A/D channel type result=40 03:54:06 Set A/D encoding result=40 03:54:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:06 Set channel filter=0.000000e+000 result=40 03:54:06 Config A/D Result=40 03:54:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:06 Get A/D filter: -9.255963e+061 result=40 03:54:06 Get A/D value=-858993460 result=40 03:54:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:06 Parameters OK 03:54:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:06 Set A/D data flow result=40 03:54:06 Set A/D channel type result=40 03:54:06 Set A/D encoding result=40 03:54:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:06 Set channel filter=0.000000e+000 result=40 03:54:06 Config A/D Result=40 03:54:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:06 Get A/D filter: -9.255963e+061 result=40 03:54:06 Get A/D value=-858993460 result=40 03:54:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:06 Aux= 03:54:06 Message to Camera, serial 111051 queued 03:54:42 Received message from Master: op=PointingHead serial=111063 03:54:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:54:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:54:42 Point started: ret=0 03:54:42 point_skyscan result=0 03:54:43 Check angles 03:54:43 SkyScan query 03:54:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:54:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:54:44 Message to Master queued w/err=0: serial=111063 error=0 03:54:49 Received message from Master: op=Filter serial=111064 03:54:49 Color wheel filter change from 0 to 0 [UTC 2019-3-5 03:54:49] 03:54:49 FLIGetFilterPos err=0 currentPosition=0 03:54:49 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:49 Filter is already there-color wheel unchanged 03:54:49 Received message from Master: op=Shutter serial=111065 03:54:49 Shutter LASER close 03:54:49 Received message from Camera: op=State serial=111067 03:54:49 GetSingleValue result=40 Value=cccccccc 03:54:49 SkyScan query 03:54:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:54:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:49 Parameters OK 03:54:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:49 Set A/D data flow result=40 03:54:49 Set A/D channel type result=40 03:54:49 Set A/D encoding result=40 03:54:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:49 Set channel filter=0.000000e+000 result=40 03:54:49 Config A/D Result=40 03:54:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:49 Get A/D filter: -9.255963e+061 result=40 03:54:49 Get A/D value=-858993460 result=40 03:54:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:49 Parameters OK 03:54:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:49 Set A/D data flow result=40 03:54:49 Set A/D channel type result=40 03:54:49 Set A/D encoding result=40 03:54:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:49 Set channel filter=0.000000e+000 result=40 03:54:49 Config A/D Result=40 03:54:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:49 Get A/D filter: -9.255963e+061 result=40 03:54:49 Get A/D value=-858993460 result=40 03:54:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:49 Aux= 03:54:49 Message to Camera, serial 111067 queued 03:55:26 Received message from Master: op=PointingHead serial=111080 03:55:26 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:55:26 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:55:27 Point started: ret=0 03:55:27 point_skyscan result=0 03:55:27 Check angles 03:55:27 SkyScan query 03:55:28 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 03:55:28 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 03:55:28 Check angles 03:55:28 SkyScan query 03:55:29 SkyScan query done: ret=0 az=153.78<-10252 ze=-6.495<-12433 Statuses=0009 0008 03:55:29 Msec=750 True Az=153.78 Ze=-6.495 Az status=0009 Ze status=0008 03:55:29 Check angles 03:55:29 SkyScan query 03:55:29 SkyScan query done: ret=0 az=171.315<-11421 ze=-6.495<-12433 Statuses=0009 0008 03:55:29 Msec=1500 True Az=171.315 Ze=-6.495 Az status=0009 Ze status=0008 03:55:30 Check angles 03:55:30 SkyScan query 03:55:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:55:30 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 03:55:30 Message to Master queued w/err=0: serial=111080 error=0 03:55:35 Received message from Master: op=Filter serial=111081 03:55:35 Color wheel filter change from 0 to 0 03:55:35 FLIGetFilterPos err=0 currentPosition=0 03:55:35 FLIGetStepsRemaining err=0 RemainingSteps=0 03:55:35 Filter is already there-color wheel unchanged 03:55:35 Received message from Master: op=Shutter serial=111082 03:55:35 Shutter LASER close 03:55:35 Received message from Camera: op=State serial=111084 03:55:35 GetSingleValue result=40 Value=cccccccc 03:55:35 SkyScan query 03:55:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:55:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:36 Parameters OK 03:55:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:36 Set A/D data flow result=40 03:55:36 Set A/D channel type result=40 03:55:36 Set A/D encoding result=40 03:55:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:36 Set channel filter=0.000000e+000 result=40 03:55:36 Config A/D Result=40 03:55:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:36 Get A/D filter: -9.255963e+061 result=40 03:55:36 Get A/D value=-858993460 result=40 03:55:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:36 Parameters OK 03:55:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:36 Set A/D data flow result=40 03:55:36 Set A/D channel type result=40 03:55:36 Set A/D encoding result=40 03:55:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:36 Set channel filter=0.000000e+000 result=40 03:55:36 Config A/D Result=40 03:55:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:36 Get A/D filter: -9.255963e+061 result=40 03:55:36 Get A/D value=-858993460 result=40 03:55:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:55:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:55:36 Aux= 03:55:36 Message to Camera, serial 111084 queued 03:56:13 Received message from Master: op=PointingHead serial=111097 03:56:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:56:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:56:13 Point started: ret=0 03:56:13 point_skyscan result=0 03:56:14 Check angles 03:56:14 SkyScan query 03:56:14 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 03:56:14 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 03:56:15 Check angles 03:56:15 SkyScan query 03:56:15 SkyScan query done: ret=0 az=135.405<-9027 ze=6.495<-11567 Statuses=0009 0008 03:56:15 Msec=750 True Az=135.405 Ze=6.495 Az status=0009 Ze status=0008 03:56:15 Check angles 03:56:15 SkyScan query 03:56:16 SkyScan query done: ret=0 az=118.02<-7868 ze=6.495<-11567 Statuses=0009 0008 03:56:16 Msec=1500 True Az=118.02 Ze=6.495 Az status=0009 Ze status=0008 03:56:16 Check angles 03:56:16 SkyScan query 03:56:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:56:17 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:56:17 Message to Master queued w/err=0: serial=111097 error=0 03:56:22 Received message from Master: op=Filter serial=111098 03:56:22 Color wheel filter change from 0 to 0 03:56:22 FLIGetFilterPos err=0 currentPosition=0 03:56:22 FLIGetStepsRemaining err=0 RemainingSteps=0 03:56:22 Filter is already there-color wheel unchanged 03:56:22 Received message from Master: op=Shutter serial=111099 03:56:22 Shutter LASER close 03:56:22 Received message from Camera: op=State serial=111101 03:56:22 GetSingleValue result=40 Value=cccccccc 03:56:22 SkyScan query 03:56:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:56:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:23 Parameters OK 03:56:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:23 Set A/D data flow result=40 03:56:23 Set A/D channel type result=40 03:56:23 Set A/D encoding result=40 03:56:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:23 Set channel filter=0.000000e+000 result=40 03:56:23 Config A/D Result=40 03:56:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:23 Get A/D filter: -9.255963e+061 result=40 03:56:23 Get A/D value=-858993460 result=40 03:56:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:23 Parameters OK 03:56:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:23 Set A/D data flow result=40 03:56:23 Set A/D channel type result=40 03:56:23 Set A/D encoding result=40 03:56:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:23 Set channel filter=0.000000e+000 result=40 03:56:23 Config A/D Result=40 03:56:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:23 Get A/D filter: -9.255963e+061 result=40 03:56:23 Get A/D value=-858993460 result=40 03:56:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:56:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:56:23 Aux= 03:56:23 Message to Camera, serial 111101 queued 03:56:59 Received message from Master: op=PointingHead serial=111114 03:56:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:56:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:57:00 Point started: ret=0 03:57:00 point_skyscan result=0 03:57:00 Check angles 03:57:00 SkyScan query 03:57:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.025<-13535 Statuses=0008 0009 03:57:01 Msec=0 True Az=112.995 Ze=-23.025 Az status=0008 Ze status=0009 03:57:01 Check angles 03:57:01 SkyScan query 03:57:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 03:57:02 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 03:57:02 Check angles 03:57:02 SkyScan query 03:57:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.355<-16357 Statuses=0008 0009 03:57:03 Msec=1500 True Az=112.995 Ze=-65.355 Az status=0008 Ze status=0009 03:57:03 Check angles 03:57:03 SkyScan query 03:57:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.31<-17754 Statuses=0008 0009 03:57:03 Msec=2250 True Az=112.995 Ze=-86.31 Az status=0008 Ze status=0009 03:57:03 Check angles 03:57:03 SkyScan query 03:57:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.715<-19181 Statuses=0008 0009 03:57:04 Msec=3000 True Az=112.995 Ze=-107.715 Az status=0008 Ze status=0009 03:57:04 Check angles 03:57:04 SkyScan query 03:57:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.655<-20577 Statuses=0008 0009 03:57:05 Msec=3750 True Az=112.995 Ze=-128.655 Az status=0008 Ze status=0009 03:57:05 Check angles 03:57:05 SkyScan query 03:57:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.625<-21975 Statuses=0008 0009 03:57:06 Msec=4500 True Az=112.995 Ze=-149.625 Az status=0008 Ze status=0009 03:57:06 Check angles 03:57:06 SkyScan query 03:57:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.55<-23370 Statuses=0008 0009 03:57:06 Msec=5250 True Az=112.995 Ze=-170.55 Az status=0008 Ze status=0009 03:57:06 Check angles 03:57:06 SkyScan query 03:57:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:57:07 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:57:07 Message to Master queued w/err=0: serial=111114 error=0 03:57:12 Received message from Master: op=Filter serial=111115 03:57:12 Color wheel filter change from 0 to 0 03:57:12 FLIGetFilterPos err=0 currentPosition=0 03:57:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:12 Filter is already there-color wheel unchanged 03:57:12 Received message from Master: op=Shutter serial=111116 03:57:12 Shutter LASER open 03:57:12 Received message from Camera: op=State serial=111118 03:57:12 GetSingleValue result=40 Value=cccccccc 03:57:12 SkyScan query 03:57:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:57:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:13 Parameters OK 03:57:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:13 Set A/D data flow result=40 03:57:13 Set A/D channel type result=40 03:57:13 Set A/D encoding result=40 03:57:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:13 Set channel filter=0.000000e+000 result=40 03:57:13 Config A/D Result=40 03:57:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:13 Get A/D filter: -9.255963e+061 result=40 03:57:13 Get A/D value=-858993460 result=40 03:57:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:13 Parameters OK 03:57:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:13 Set A/D data flow result=40 03:57:13 Set A/D channel type result=40 03:57:13 Set A/D encoding result=40 03:57:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:13 Set channel filter=0.000000e+000 result=40 03:57:13 Config A/D Result=40 03:57:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:13 Get A/D filter: -9.255963e+061 result=40 03:57:13 Get A/D value=-858993460 result=40 03:57:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:57:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:57:13 Aux= 03:57:13 Message to Camera, serial 111118 queued 03:57:21 Received message from Master: op=Shutter serial=111128 03:57:21 Shutter LASER close 03:57:22 Received message from Master: op=PointingHead serial=111132 03:57:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:57:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:57:22 Point started: ret=0 03:57:22 point_skyscan result=0 03:57:23 Check angles 03:57:23 SkyScan query 03:57:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 03:57:24 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 03:57:24 Check angles 03:57:24 SkyScan query 03:57:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 03:57:24 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 03:57:24 Check angles 03:57:24 SkyScan query 03:57:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 03:57:25 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 03:57:25 Check angles 03:57:25 SkyScan query 03:57:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 03:57:26 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 03:57:26 Check angles 03:57:26 SkyScan query 03:57:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.025<-15935 Statuses=0008 0009 03:57:27 Msec=3000 True Az=112.995 Ze=-59.025 Az status=0008 Ze status=0009 03:57:27 Check angles 03:57:27 SkyScan query 03:57:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.04<-14536 Statuses=0008 0009 03:57:27 Msec=3750 True Az=112.995 Ze=-38.04 Az status=0008 Ze status=0009 03:57:27 Check angles 03:57:27 SkyScan query 03:57:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.1<-13140 Statuses=0008 0009 03:57:28 Msec=4500 True Az=112.995 Ze=-17.1 Az status=0008 Ze status=0009 03:57:28 Check angles 03:57:28 SkyScan query 03:57:29 SkyScan query done: ret=0 az=112.995<-7533 ze=3.855<-11743 Statuses=0008 0009 03:57:29 Msec=5250 True Az=112.995 Ze=3.855 Az status=0008 Ze status=0009 03:57:29 Check angles 03:57:29 SkyScan query 03:57:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:57:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:57:30 Message to Master queued w/err=0: serial=111132 error=0 03:57:35 Received message from Master: op=Filter serial=111133 03:57:35 Color wheel filter change from 0 to 0 03:57:35 FLIGetFilterPos err=0 currentPosition=0 03:57:35 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:35 Filter is already there-color wheel unchanged 03:57:35 Received message from Master: op=Shutter serial=111134 03:57:35 Shutter LASER close 03:57:35 Received message from Camera: op=State serial=111136 03:57:35 GetSingleValue result=40 Value=cccccccc 03:57:35 SkyScan query 03:57:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:57:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:35 Parameters OK 03:57:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:35 Set A/D data flow result=40 03:57:35 Set A/D channel type result=40 03:57:35 Set A/D encoding result=40 03:57:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:35 Set channel filter=0.000000e+000 result=40 03:57:35 Config A/D Result=40 03:57:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:35 Get A/D filter: -9.255963e+061 result=40 03:57:35 Get A/D value=-858993460 result=40 03:57:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:35 Parameters OK 03:57:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:35 Set A/D data flow result=40 03:57:35 Set A/D channel type result=40 03:57:35 Set A/D encoding result=40 03:57:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:35 Set channel filter=0.000000e+000 result=40 03:57:35 Config A/D Result=40 03:57:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:35 Get A/D filter: -9.255963e+061 result=40 03:57:35 Get A/D value=-858993460 result=40 03:57:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:57:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:57:35 Aux= 03:57:35 Message to Camera, serial 111136 queued 03:58:12 Received message from Master: op=PointingHead serial=111149 03:58:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:58:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:58:13 Point started: ret=0 03:58:13 point_skyscan result=0 03:58:13 Check angles 03:58:13 SkyScan query 03:58:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:58:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:58:14 Message to Master queued w/err=0: serial=111149 error=0 03:58:19 Received message from Master: op=Filter serial=111150 03:58:19 Color wheel filter change from 0 to 0 03:58:19 FLIGetFilterPos err=0 currentPosition=0 03:58:19 FLIGetStepsRemaining err=0 RemainingSteps=0 03:58:19 Filter is already there-color wheel unchanged 03:58:19 Received message from Master: op=Shutter serial=111151 03:58:19 Shutter LASER close 03:58:19 Received message from Camera: op=State serial=111153 03:58:19 GetSingleValue result=40 Value=cccccccc 03:58:19 SkyScan query 03:58:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:58:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:20 Parameters OK 03:58:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:20 Set A/D data flow result=40 03:58:20 Set A/D channel type result=40 03:58:20 Set A/D encoding result=40 03:58:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:20 Set channel filter=0.000000e+000 result=40 03:58:20 Config A/D Result=40 03:58:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:20 Get A/D filter: -9.255963e+061 result=40 03:58:20 Get A/D value=-858993460 result=40 03:58:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:20 Parameters OK 03:58:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:20 Set A/D data flow result=40 03:58:20 Set A/D channel type result=40 03:58:20 Set A/D encoding result=40 03:58:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:20 Set channel filter=0.000000e+000 result=40 03:58:20 Config A/D Result=40 03:58:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:20 Get A/D filter: -9.255963e+061 result=40 03:58:20 Get A/D value=-858993460 result=40 03:58:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:58:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:58:20 Aux= 03:58:20 Message to Camera, serial 111153 queued 03:58:57 Received message from Master: op=PointingHead serial=111166 03:58:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:58:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:58:57 Point started: ret=0 03:58:57 point_skyscan result=0 03:58:58 Check angles 03:58:58 SkyScan query 03:58:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:58:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:58:58 Message to Master queued w/err=0: serial=111166 error=0 03:59:03 Received message from Master: op=Filter serial=111167 03:59:03 Color wheel filter change from 0 to 0 03:59:03 FLIGetFilterPos err=0 currentPosition=0 03:59:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:03 Filter is already there-color wheel unchanged 03:59:04 Received message from Master: op=Shutter serial=111168 03:59:04 Shutter LASER close 03:59:04 Received message from Camera: op=State serial=111170 03:59:04 GetSingleValue result=40 Value=cccccccc 03:59:04 SkyScan query 03:59:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:59:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:04 Parameters OK 03:59:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:04 Set A/D data flow result=40 03:59:04 Set A/D channel type result=40 03:59:04 Set A/D encoding result=40 03:59:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:04 Set channel filter=0.000000e+000 result=40 03:59:04 Config A/D Result=40 03:59:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:04 Get A/D filter: -9.255963e+061 result=40 03:59:04 Get A/D value=-858993460 result=40 03:59:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:04 Parameters OK 03:59:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:04 Set A/D data flow result=40 03:59:04 Set A/D channel type result=40 03:59:04 Set A/D encoding result=40 03:59:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:04 Set channel filter=0.000000e+000 result=40 03:59:04 Config A/D Result=40 03:59:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:04 Get A/D filter: -9.255963e+061 result=40 03:59:04 Get A/D value=-858993460 result=40 03:59:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:04 Aux= 03:59:04 Message to Camera, serial 111170 queued 03:59:41 Received message from Master: op=PointingHead serial=111183 03:59:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:59:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:59:41 Point started: ret=0 03:59:41 point_skyscan result=0 03:59:42 Check angles 03:59:42 SkyScan query 03:59:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:59:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:59:43 Message to Master queued w/err=0: serial=111183 error=0 03:59:48 Received message from Master: op=Filter serial=111184 03:59:48 Color wheel filter change from 0 to 0 03:59:48 FLIGetFilterPos err=0 currentPosition=0 03:59:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:48 Filter is already there-color wheel unchanged 03:59:48 Received message from Master: op=Shutter serial=111185 03:59:48 Shutter LASER close 03:59:48 Received message from Camera: op=State serial=111187 03:59:48 GetSingleValue result=40 Value=cccccccc 03:59:48 SkyScan query 03:59:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:59:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:48 Parameters OK 03:59:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:48 Set A/D data flow result=40 03:59:48 Set A/D channel type result=40 03:59:48 Set A/D encoding result=40 03:59:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:48 Set channel filter=0.000000e+000 result=40 03:59:48 Config A/D Result=40 03:59:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:48 Get A/D filter: -9.255963e+061 result=40 03:59:48 Get A/D value=-858993460 result=40 03:59:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:48 Parameters OK 03:59:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:48 Set A/D data flow result=40 03:59:48 Set A/D channel type result=40 03:59:48 Set A/D encoding result=40 03:59:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:48 Set channel filter=0.000000e+000 result=40 03:59:48 Config A/D Result=40 03:59:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:48 Get A/D filter: -9.255963e+061 result=40 03:59:48 Get A/D value=-858993460 result=40 03:59:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:48 Aux= 03:59:48 Message to Camera, serial 111187 queued 04:00:25 Received message from Master: op=PointingHead serial=111200 04:00:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:00:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:00:26 Point started: ret=0 04:00:26 point_skyscan result=0 04:00:26 Check angles 04:00:26 SkyScan query 04:00:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 04:00:27 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 04:00:27 Check angles 04:00:27 SkyScan query 04:00:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 04:00:28 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 04:00:28 Check angles 04:00:28 SkyScan query 04:00:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 04:00:28 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 04:00:29 Check angles 04:00:29 SkyScan query 04:00:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.19<-17746 Statuses=0008 0009 04:00:29 Msec=2250 True Az=112.995 Ze=-86.19 Az status=0008 Ze status=0009 04:00:29 Check angles 04:00:29 SkyScan query 04:00:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.58<-19172 Statuses=0008 0009 04:00:30 Msec=3000 True Az=112.995 Ze=-107.58 Az status=0008 Ze status=0009 04:00:30 Check angles 04:00:30 SkyScan query 04:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.505<-20567 Statuses=0008 0009 04:00:31 Msec=3750 True Az=112.995 Ze=-128.505 Az status=0008 Ze status=0009 04:00:31 Check angles 04:00:31 SkyScan query 04:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.475<-21965 Statuses=0008 0009 04:00:31 Msec=4500 True Az=112.995 Ze=-149.475 Az status=0008 Ze status=0009 04:00:32 Check angles 04:00:32 SkyScan query 04:00:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.79<-23386 Statuses=0008 0009 04:00:32 Msec=5250 True Az=112.995 Ze=-170.79 Az status=0008 Ze status=0009 04:00:32 Check angles 04:00:32 SkyScan query 04:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:00:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:00:33 Message to Master queued w/err=0: serial=111200 error=0 04:00:38 Received message from Master: op=Filter serial=111201 04:00:38 Color wheel filter change from 0 to 0 04:00:38 FLIGetFilterPos err=0 currentPosition=0 04:00:38 FLIGetStepsRemaining err=0 RemainingSteps=0 04:00:38 Filter is already there-color wheel unchanged 04:00:38 Received message from Master: op=Shutter serial=111202 04:00:38 Shutter LASER open 04:00:38 Received message from Camera: op=State serial=111204 04:00:38 GetSingleValue result=40 Value=cccccccc 04:00:38 SkyScan query 04:00:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:00:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:39 Parameters OK 04:00:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:39 Set A/D data flow result=40 04:00:39 Set A/D channel type result=40 04:00:39 Set A/D encoding result=40 04:00:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:39 Set channel filter=0.000000e+000 result=40 04:00:39 Config A/D Result=40 04:00:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:39 Get A/D filter: -9.255963e+061 result=40 04:00:39 Get A/D value=-858993460 result=40 04:00:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:39 Parameters OK 04:00:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:39 Set A/D data flow result=40 04:00:39 Set A/D channel type result=40 04:00:39 Set A/D encoding result=40 04:00:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:39 Set channel filter=0.000000e+000 result=40 04:00:39 Config A/D Result=40 04:00:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:39 Get A/D filter: -9.255963e+061 result=40 04:00:39 Get A/D value=-858993460 result=40 04:00:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:00:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:00:39 Aux= 04:00:39 Message to Camera, serial 111204 queued 04:00:47 Received message from Master: op=Shutter serial=111214 04:00:47 Shutter LASER close 04:00:48 Received message from Master: op=PointingHead serial=111218 04:00:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:00:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:00:48 Point started: ret=0 04:00:48 point_skyscan result=0 04:00:49 Check angles 04:00:49 SkyScan query 04:00:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 04:00:50 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 04:00:50 Check angles 04:00:50 SkyScan query 04:00:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.43<-20162 Statuses=0008 0009 04:00:50 Msec=750 True Az=112.995 Ze=-122.43 Az status=0008 Ze status=0009 04:00:51 Check angles 04:00:51 SkyScan query 04:00:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.475<-18765 Statuses=0008 0009 04:00:51 Msec=1500 True Az=112.995 Ze=-101.475 Az status=0008 Ze status=0009 04:00:51 Check angles 04:00:51 SkyScan query 04:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 04:00:52 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 04:00:52 Check angles 04:00:52 SkyScan query 04:00:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.13<-15942 Statuses=0008 0009 04:00:53 Msec=3000 True Az=112.995 Ze=-59.13 Az status=0008 Ze status=0009 04:00:53 Check angles 04:00:53 SkyScan query 04:00:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.145<-14543 Statuses=0008 0009 04:00:53 Msec=3750 True Az=112.995 Ze=-38.145 Az status=0008 Ze status=0009 04:00:54 Check angles 04:00:54 SkyScan query 04:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.755<-13117 Statuses=0008 0009 04:00:54 Msec=4500 True Az=112.995 Ze=-16.755 Az status=0008 Ze status=0009 04:00:54 Check angles 04:00:54 SkyScan query 04:00:55 SkyScan query done: ret=0 az=112.995<-7533 ze=4.515<-11699 Statuses=0008 0009 04:00:55 Msec=5250 True Az=112.995 Ze=4.515 Az status=0008 Ze status=0009 04:00:55 Check angles 04:00:55 SkyScan query 04:00:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:00:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:00:56 Message to Master queued w/err=0: serial=111218 error=0 04:01:01 Received message from Master: op=Filter serial=111219 04:01:01 Color wheel filter change from 0 to 0 04:01:01 FLIGetFilterPos err=0 currentPosition=0 04:01:01 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:01 Filter is already there-color wheel unchanged 04:01:01 Received message from Master: op=Shutter serial=111220 04:01:01 Shutter LASER close 04:01:01 Received message from Camera: op=State serial=111222 04:01:01 GetSingleValue result=40 Value=cccccccc 04:01:01 SkyScan query 04:01:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:01:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:02 Parameters OK 04:01:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:02 Set A/D data flow result=40 04:01:02 Set A/D channel type result=40 04:01:02 Set A/D encoding result=40 04:01:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:02 Set channel filter=0.000000e+000 result=40 04:01:02 Config A/D Result=40 04:01:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:02 Get A/D filter: -9.255963e+061 result=40 04:01:02 Get A/D value=-858993460 result=40 04:01:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:02 Parameters OK 04:01:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:02 Set A/D data flow result=40 04:01:02 Set A/D channel type result=40 04:01:02 Set A/D encoding result=40 04:01:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:02 Set channel filter=0.000000e+000 result=40 04:01:02 Config A/D Result=40 04:01:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:02 Get A/D filter: -9.255963e+061 result=40 04:01:02 Get A/D value=-858993460 result=40 04:01:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:02 Aux= 04:01:02 Message to Camera, serial 111222 queued 04:01:38 Received message from Master: op=PointingHead serial=111235 04:01:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:01:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:01:39 Point started: ret=0 04:01:39 point_skyscan result=0 04:01:39 Check angles 04:01:39 SkyScan query 04:01:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:01:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:01:40 Message to Master queued w/err=0: serial=111235 error=0 04:01:45 Received message from Master: op=Filter serial=111236 04:01:45 Color wheel filter change from 0 to 0 04:01:45 FLIGetFilterPos err=0 currentPosition=0 04:01:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:45 Filter is already there-color wheel unchanged 04:01:45 Received message from Master: op=Shutter serial=111237 04:01:45 Shutter LASER close 04:01:45 Received message from Camera: op=State serial=111239 04:01:45 GetSingleValue result=40 Value=cccccccc 04:01:45 SkyScan query 04:01:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:01:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:46 Parameters OK 04:01:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:46 Set A/D data flow result=40 04:01:46 Set A/D channel type result=40 04:01:46 Set A/D encoding result=40 04:01:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:46 Set channel filter=0.000000e+000 result=40 04:01:46 Config A/D Result=40 04:01:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:46 Get A/D filter: -9.255963e+061 result=40 04:01:46 Get A/D value=-858993460 result=40 04:01:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:46 Parameters OK 04:01:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:46 Set A/D data flow result=40 04:01:46 Set A/D channel type result=40 04:01:46 Set A/D encoding result=40 04:01:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:46 Set channel filter=0.000000e+000 result=40 04:01:46 Config A/D Result=40 04:01:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:46 Get A/D filter: -9.255963e+061 result=40 04:01:46 Get A/D value=-858993460 result=40 04:01:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:46 Aux= 04:01:46 Message to Camera, serial 111239 queued 04:02:23 Received message from Master: op=PointingHead serial=111252 04:02:23 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:02:23 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:02:23 Point started: ret=0 04:02:23 point_skyscan result=0 04:02:24 Check angles 04:02:24 SkyScan query 04:02:24 SkyScan query done: ret=0 az=135.78<-9052 ze=-6.51<-12434 Statuses=0009 0008 04:02:24 Msec=0 True Az=135.78 Ze=-6.51 Az status=0009 Ze status=0008 04:02:24 Check angles 04:02:24 SkyScan query 04:02:25 SkyScan query done: ret=0 az=153.3<-10220 ze=-6.495<-12433 Statuses=0009 0008 04:02:25 Msec=750 True Az=153.3 Ze=-6.495 Az status=0009 Ze status=0008 04:02:25 Check angles 04:02:25 SkyScan query 04:02:26 SkyScan query done: ret=0 az=170.73<-11382 ze=-6.495<-12433 Statuses=0009 0008 04:02:26 Msec=1500 True Az=170.73 Ze=-6.495 Az status=0009 Ze status=0008 04:02:26 Check angles 04:02:26 SkyScan query 04:02:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:02:27 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:02:27 Message to Master queued w/err=0: serial=111252 error=0 04:02:32 Received message from Master: op=Filter serial=111253 04:02:32 Color wheel filter change from 0 to 0 04:02:32 FLIGetFilterPos err=0 currentPosition=0 04:02:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:02:32 Filter is already there-color wheel unchanged 04:02:32 Received message from Master: op=Shutter serial=111254 04:02:32 Shutter LASER close 04:02:32 Received message from Camera: op=State serial=111256 04:02:32 GetSingleValue result=40 Value=cccccccc 04:02:32 SkyScan query 04:02:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:02:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:32 Parameters OK 04:02:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:32 Set A/D data flow result=40 04:02:32 Set A/D channel type result=40 04:02:32 Set A/D encoding result=40 04:02:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:32 Set channel filter=0.000000e+000 result=40 04:02:32 Config A/D Result=40 04:02:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:32 Get A/D filter: -9.255963e+061 result=40 04:02:32 Get A/D value=-858993460 result=40 04:02:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:32 Parameters OK 04:02:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:32 Set A/D data flow result=40 04:02:32 Set A/D channel type result=40 04:02:32 Set A/D encoding result=40 04:02:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:32 Set channel filter=0.000000e+000 result=40 04:02:32 Config A/D Result=40 04:02:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:32 Get A/D filter: -9.255963e+061 result=40 04:02:32 Get A/D value=-858993460 result=40 04:02:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:02:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:02:32 Aux= 04:02:32 Message to Camera, serial 111256 queued 04:03:08 Received message from Master: op=PointingHead serial=111268 04:03:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:03:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:03:09 Point started: ret=0 04:03:09 point_skyscan result=0 04:03:09 Check angles 04:03:09 SkyScan query 04:03:10 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 04:03:10 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 04:03:10 Check angles 04:03:10 SkyScan query 04:03:11 SkyScan query done: ret=0 az=135.435<-9029 ze=6.495<-11567 Statuses=0009 0008 04:03:11 Msec=750 True Az=135.435 Ze=6.495 Az status=0009 Ze status=0008 04:03:11 Check angles 04:03:11 SkyScan query 04:03:11 SkyScan query done: ret=0 az=117.945<-7863 ze=6.495<-11567 Statuses=0009 0008 04:03:11 Msec=1500 True Az=117.945 Ze=6.495 Az status=0009 Ze status=0008 04:03:12 Check angles 04:03:12 SkyScan query 04:03:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:03:12 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:03:12 Message to Master queued w/err=0: serial=111268 error=0 04:03:17 Received message from Master: op=Filter serial=111269 04:03:17 Color wheel filter change from 0 to 0 04:03:17 FLIGetFilterPos err=0 currentPosition=0 04:03:17 FLIGetStepsRemaining err=0 RemainingSteps=0 04:03:17 Filter is already there-color wheel unchanged 04:03:17 Received message from Master: op=Shutter serial=111270 04:03:17 Shutter LASER close 04:03:17 Received message from Camera: op=State serial=111272 04:03:17 GetSingleValue result=40 Value=cccccccc 04:03:17 SkyScan query 04:03:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:03:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:18 Parameters OK 04:03:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:18 Set A/D data flow result=40 04:03:18 Set A/D channel type result=40 04:03:18 Set A/D encoding result=40 04:03:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:18 Set channel filter=0.000000e+000 result=40 04:03:18 Config A/D Result=40 04:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:18 Get A/D filter: -9.255963e+061 result=40 04:03:18 Get A/D value=-858993460 result=40 04:03:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:18 Parameters OK 04:03:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:18 Set A/D data flow result=40 04:03:18 Set A/D channel type result=40 04:03:18 Set A/D encoding result=40 04:03:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:18 Set channel filter=0.000000e+000 result=40 04:03:18 Config A/D Result=40 04:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:18 Get A/D filter: -9.255963e+061 result=40 04:03:18 Get A/D value=-858993460 result=40 04:03:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:03:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:03:18 Aux= 04:03:18 Message to Camera, serial 111272 queued 04:03:38 Received message from Master: op=Identify serial=111273 [UTC 2019-3-5 04:03:50] 04:03:55 Received message from Master: op=PointingHead serial=111288 04:03:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:03:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:03:55 Point started: ret=0 04:03:55 point_skyscan result=0 04:03:56 Check angles 04:03:56 SkyScan query 04:03:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.49<-13566 Statuses=0008 0009 04:03:56 Msec=0 True Az=112.995 Ze=-23.49 Az status=0008 Ze status=0009 04:03:57 Check angles 04:03:57 SkyScan query 04:03:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.895<-14993 Statuses=0008 0009 04:03:57 Msec=750 True Az=112.995 Ze=-44.895 Az status=0008 Ze status=0009 04:03:57 Check angles 04:03:57 SkyScan query 04:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.285<-16419 Statuses=0008 0009 04:03:58 Msec=1500 True Az=112.995 Ze=-66.285 Az status=0008 Ze status=0009 04:03:58 Check angles 04:03:58 SkyScan query 04:03:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.24<-17816 Statuses=0008 0009 04:03:59 Msec=2250 True Az=112.995 Ze=-87.24 Az status=0008 Ze status=0009 04:03:59 Check angles 04:03:59 SkyScan query 04:04:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.195<-19213 Statuses=0008 0009 04:04:00 Msec=3000 True Az=112.995 Ze=-108.195 Az status=0008 Ze status=0009 04:04:00 Check angles 04:04:00 SkyScan query 04:04:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.135<-20609 Statuses=0008 0009 04:04:00 Msec=3750 True Az=112.995 Ze=-129.135 Az status=0008 Ze status=0009 04:04:00 Check angles 04:04:00 SkyScan query 04:04:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.09<-22006 Statuses=0008 0009 04:04:01 Msec=4500 True Az=112.995 Ze=-150.09 Az status=0008 Ze status=0009 04:04:01 Check angles 04:04:01 SkyScan query 04:04:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.27<-23418 Statuses=0008 0009 04:04:02 Msec=5250 True Az=112.995 Ze=-171.27 Az status=0008 Ze status=0009 04:04:02 Check angles 04:04:02 SkyScan query 04:04:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:04:03 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:04:03 Message to Master queued w/err=0: serial=111288 error=0 04:04:08 Received message from Master: op=Filter serial=111289 04:04:08 Color wheel filter change from 0 to 0 04:04:08 FLIGetFilterPos err=0 currentPosition=0 04:04:08 FLIGetStepsRemaining err=0 RemainingSteps=0 04:04:08 Filter is already there-color wheel unchanged 04:04:08 Received message from Master: op=Shutter serial=111290 04:04:08 Shutter LASER open 04:04:08 Received message from Camera: op=State serial=111292 04:04:08 GetSingleValue result=40 Value=cccccccc 04:04:08 SkyScan query 04:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:04:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:08 Parameters OK 04:04:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:08 Set A/D data flow result=40 04:04:08 Set A/D channel type result=40 04:04:08 Set A/D encoding result=40 04:04:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:08 Set channel filter=0.000000e+000 result=40 04:04:08 Config A/D Result=40 04:04:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:08 Get A/D filter: -9.255963e+061 result=40 04:04:08 Get A/D value=-858993460 result=40 04:04:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:08 Parameters OK 04:04:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:08 Set A/D data flow result=40 04:04:08 Set A/D channel type result=40 04:04:08 Set A/D encoding result=40 04:04:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:08 Set channel filter=0.000000e+000 result=40 04:04:08 Config A/D Result=40 04:04:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:08 Get A/D filter: -9.255963e+061 result=40 04:04:08 Get A/D value=-858993460 result=40 04:04:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:04:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:04:08 Aux= 04:04:08 Message to Camera, serial 111292 queued 04:04:17 Received message from Master: op=Shutter serial=111302 04:04:17 Shutter LASER close 04:04:17 Received message from Master: op=PointingHead serial=111306 04:04:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:04:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:04:18 Point started: ret=0 04:04:18 point_skyscan result=0 04:04:18 Check angles 04:04:18 SkyScan query 04:04:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 04:04:19 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 04:04:19 Check angles 04:04:19 SkyScan query 04:04:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 04:04:20 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 04:04:20 Check angles 04:04:20 SkyScan query 04:04:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.71<-18714 Statuses=0008 0009 04:04:21 Msec=1500 True Az=112.995 Ze=-100.71 Az status=0008 Ze status=0009 04:04:21 Check angles 04:04:21 SkyScan query 04:04:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.755<-17317 Statuses=0008 0009 04:04:21 Msec=2250 True Az=112.995 Ze=-79.755 Az status=0008 Ze status=0009 04:04:21 Check angles 04:04:21 SkyScan query 04:04:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 04:04:22 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 04:04:22 Check angles 04:04:22 SkyScan query 04:04:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.845<-14523 Statuses=0008 0009 04:04:23 Msec=3750 True Az=112.995 Ze=-37.845 Az status=0008 Ze status=0009 04:04:23 Check angles 04:04:23 SkyScan query 04:04:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.875<-13125 Statuses=0008 0009 04:04:24 Msec=4500 True Az=112.995 Ze=-16.875 Az status=0008 Ze status=0009 04:04:24 Check angles 04:04:24 SkyScan query 04:04:24 SkyScan query done: ret=0 az=112.995<-7533 ze=4.425<-11705 Statuses=0008 0009 04:04:24 Msec=5250 True Az=112.995 Ze=4.425 Az status=0008 Ze status=0009 04:04:24 Check angles 04:04:24 SkyScan query 04:04:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:04:25 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:04:25 Message to Master queued w/err=0: serial=111306 error=0 04:04:30 Received message from Master: op=Filter serial=111307 04:04:30 Color wheel filter change from 0 to 0 04:04:30 FLIGetFilterPos err=0 currentPosition=0 04:04:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:04:30 Filter is already there-color wheel unchanged 04:04:30 Received message from Master: op=Shutter serial=111308 04:04:30 Shutter LASER close 04:04:30 Received message from Camera: op=State serial=111310 04:04:30 GetSingleValue result=40 Value=cccccccc 04:04:30 SkyScan query 04:04:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:04:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:31 Parameters OK 04:04:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:31 Set A/D data flow result=40 04:04:31 Set A/D channel type result=40 04:04:31 Set A/D encoding result=40 04:04:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:31 Set channel filter=0.000000e+000 result=40 04:04:31 Config A/D Result=40 04:04:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:31 Get A/D filter: -9.255963e+061 result=40 04:04:31 Get A/D value=-858993460 result=40 04:04:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:31 Parameters OK 04:04:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:31 Set A/D data flow result=40 04:04:31 Set A/D channel type result=40 04:04:31 Set A/D encoding result=40 04:04:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:31 Set channel filter=0.000000e+000 result=40 04:04:31 Config A/D Result=40 04:04:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:31 Get A/D filter: -9.255963e+061 result=40 04:04:31 Get A/D value=-858993460 result=40 04:04:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:04:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:04:31 Aux= 04:04:31 Message to Camera, serial 111310 queued 04:05:08 Received message from Master: op=PointingHead serial=111323 04:05:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:05:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:05:08 Point started: ret=0 04:05:08 point_skyscan result=0 04:05:09 Check angles 04:05:09 SkyScan query 04:05:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:05:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:05:09 Message to Master queued w/err=0: serial=111323 error=0 04:05:14 Received message from Master: op=Filter serial=111324 04:05:14 Color wheel filter change from 0 to 0 04:05:14 FLIGetFilterPos err=0 currentPosition=0 04:05:14 FLIGetStepsRemaining err=0 RemainingSteps=0 04:05:14 Filter is already there-color wheel unchanged 04:05:15 Received message from Master: op=Shutter serial=111325 04:05:15 Shutter LASER close 04:05:15 Received message from Camera: op=State serial=111327 04:05:15 GetSingleValue result=40 Value=cccccccc 04:05:15 SkyScan query 04:05:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:05:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:15 Parameters OK 04:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:15 Set A/D data flow result=40 04:05:15 Set A/D channel type result=40 04:05:15 Set A/D encoding result=40 04:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:15 Set channel filter=0.000000e+000 result=40 04:05:15 Config A/D Result=40 04:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:15 Get A/D filter: -9.255963e+061 result=40 04:05:15 Get A/D value=-858993460 result=40 04:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:15 Parameters OK 04:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:15 Set A/D data flow result=40 04:05:15 Set A/D channel type result=40 04:05:15 Set A/D encoding result=40 04:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:15 Set channel filter=0.000000e+000 result=40 04:05:15 Config A/D Result=40 04:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:15 Get A/D filter: -9.255963e+061 result=40 04:05:15 Get A/D value=-858993460 result=40 04:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:05:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:05:15 Aux= 04:05:15 Message to Camera, serial 111327 queued 04:05:52 Received message from Master: op=PointingHead serial=111340 04:05:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:05:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:05:52 Point started: ret=0 04:05:52 point_skyscan result=0 04:05:53 Check angles 04:05:53 SkyScan query 04:05:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:05:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:05:54 Message to Master queued w/err=0: serial=111340 error=0 04:05:59 Received message from Master: op=Filter serial=111341 04:05:59 Color wheel filter change from 0 to 0 04:05:59 FLIGetFilterPos err=0 currentPosition=0 04:05:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:05:59 Filter is already there-color wheel unchanged 04:05:59 Received message from Master: op=Shutter serial=111342 04:05:59 Shutter LASER close 04:05:59 Received message from Camera: op=State serial=111344 04:05:59 GetSingleValue result=40 Value=cccccccc 04:05:59 SkyScan query 04:06:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:06:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:00 Parameters OK 04:06:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:00 Set A/D data flow result=40 04:06:00 Set A/D channel type result=40 04:06:00 Set A/D encoding result=40 04:06:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:00 Set channel filter=0.000000e+000 result=40 04:06:00 Config A/D Result=40 04:06:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:00 Get A/D filter: -9.255963e+061 result=40 04:06:00 Get A/D value=-858993460 result=40 04:06:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:00 Parameters OK 04:06:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:00 Set A/D data flow result=40 04:06:00 Set A/D channel type result=40 04:06:00 Set A/D encoding result=40 04:06:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:00 Set channel filter=0.000000e+000 result=40 04:06:00 Config A/D Result=40 04:06:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:00 Get A/D filter: -9.255963e+061 result=40 04:06:00 Get A/D value=-858993460 result=40 04:06:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:06:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:06:00 Aux= 04:06:00 Message to Camera, serial 111344 queued 04:06:36 Received message from Master: op=PointingHead serial=111357 04:06:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:06:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:06:37 Point started: ret=0 04:06:37 point_skyscan result=0 04:06:37 Check angles 04:06:37 SkyScan query 04:06:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:06:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:06:38 Message to Master queued w/err=0: serial=111357 error=0 04:06:43 Received message from Master: op=Filter serial=111358 04:06:43 Color wheel filter change from 0 to 0 04:06:43 FLIGetFilterPos err=0 currentPosition=0 04:06:43 FLIGetStepsRemaining err=0 RemainingSteps=0 04:06:43 Filter is already there-color wheel unchanged 04:06:43 Received message from Master: op=Shutter serial=111359 04:06:43 Shutter LASER close 04:06:43 Received message from Camera: op=State serial=111361 04:06:43 GetSingleValue result=40 Value=cccccccc 04:06:43 SkyScan query 04:06:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:06:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:44 Parameters OK 04:06:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:44 Set A/D data flow result=40 04:06:44 Set A/D channel type result=40 04:06:44 Set A/D encoding result=40 04:06:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:44 Set channel filter=0.000000e+000 result=40 04:06:44 Config A/D Result=40 04:06:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:44 Get A/D filter: -9.255963e+061 result=40 04:06:44 Get A/D value=-858993460 result=40 04:06:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:44 Parameters OK 04:06:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:44 Set A/D data flow result=40 04:06:44 Set A/D channel type result=40 04:06:44 Set A/D encoding result=40 04:06:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:44 Set channel filter=0.000000e+000 result=40 04:06:44 Config A/D Result=40 04:06:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:44 Get A/D filter: -9.255963e+061 result=40 04:06:44 Get A/D value=-858993460 result=40 04:06:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:06:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:06:44 Aux= 04:06:44 Message to Camera, serial 111361 queued 04:07:21 Received message from Master: op=PointingHead serial=111374 04:07:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:07:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:07:21 Point started: ret=0 04:07:21 point_skyscan result=0 04:07:22 Check angles 04:07:22 SkyScan query 04:07:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 04:07:22 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 04:07:23 Check angles 04:07:23 SkyScan query 04:07:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.06<-15004 Statuses=0008 0009 04:07:23 Msec=750 True Az=112.995 Ze=-45.06 Az status=0008 Ze status=0009 04:07:23 Check angles 04:07:23 SkyScan query 04:07:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-66<-16400 Statuses=0008 0009 04:07:24 Msec=1500 True Az=112.995 Ze=-66 Az status=0008 Ze status=0009 04:07:24 Check angles 04:07:24 SkyScan query 04:07:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.955<-17797 Statuses=0008 0009 04:07:25 Msec=2250 True Az=112.995 Ze=-86.955 Az status=0008 Ze status=0009 04:07:25 Check angles 04:07:25 SkyScan query 04:07:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.91<-19194 Statuses=0008 0009 04:07:25 Msec=3000 True Az=112.995 Ze=-107.91 Az status=0008 Ze status=0009 04:07:26 Check angles 04:07:26 SkyScan query 04:07:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.865<-20591 Statuses=0008 0009 04:07:26 Msec=3750 True Az=112.995 Ze=-128.865 Az status=0008 Ze status=0009 04:07:26 Check angles 04:07:26 SkyScan query 04:07:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.255<-22017 Statuses=0008 0009 04:07:27 Msec=4500 True Az=112.995 Ze=-150.255 Az status=0008 Ze status=0009 04:07:27 Check angles 04:07:27 SkyScan query 04:07:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.06<-23404 Statuses=0008 0009 04:07:28 Msec=5250 True Az=112.995 Ze=-171.06 Az status=0008 Ze status=0009 04:07:28 Check angles 04:07:28 SkyScan query 04:07:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:07:28 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:07:28 Message to Master queued w/err=0: serial=111374 error=0 04:07:33 Received message from Master: op=Filter serial=111375 04:07:33 Color wheel filter change from 0 to 0 04:07:33 FLIGetFilterPos err=0 currentPosition=0 04:07:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:07:33 Filter is already there-color wheel unchanged 04:07:34 Received message from Master: op=Shutter serial=111376 04:07:34 Shutter LASER open 04:07:34 Received message from Camera: op=State serial=111378 04:07:34 GetSingleValue result=40 Value=cccccccc 04:07:34 SkyScan query 04:07:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:07:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:34 Parameters OK 04:07:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:34 Set A/D data flow result=40 04:07:34 Set A/D channel type result=40 04:07:34 Set A/D encoding result=40 04:07:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:34 Set channel filter=0.000000e+000 result=40 04:07:34 Config A/D Result=40 04:07:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:34 Get A/D filter: -9.255963e+061 result=40 04:07:34 Get A/D value=-858993460 result=40 04:07:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:34 Parameters OK 04:07:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:34 Set A/D data flow result=40 04:07:34 Set A/D channel type result=40 04:07:34 Set A/D encoding result=40 04:07:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:34 Set channel filter=0.000000e+000 result=40 04:07:34 Config A/D Result=40 04:07:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:34 Get A/D filter: -9.255963e+061 result=40 04:07:34 Get A/D value=-858993460 result=40 04:07:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:07:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:07:34 Aux= 04:07:34 Message to Camera, serial 111378 queued 04:07:42 Received message from Master: op=Shutter serial=111387 04:07:42 Shutter LASER close 04:07:42 Received message from Master: op=PointingHead serial=111391 04:07:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:07:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:07:43 Point started: ret=0 04:07:43 point_skyscan result=0 04:07:43 Check angles 04:07:43 SkyScan query 04:07:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 04:07:44 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 04:07:44 Check angles 04:07:44 SkyScan query 04:07:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.725<-20115 Statuses=0008 0009 04:07:45 Msec=750 True Az=112.995 Ze=-121.725 Az status=0008 Ze status=0009 04:07:45 Check angles 04:07:45 SkyScan query 04:07:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.8<-18720 Statuses=0008 0009 04:07:46 Msec=1500 True Az=112.995 Ze=-100.8 Az status=0008 Ze status=0009 04:07:46 Check angles 04:07:46 SkyScan query 04:07:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.845<-17323 Statuses=0008 0009 04:07:46 Msec=2250 True Az=112.995 Ze=-79.845 Az status=0008 Ze status=0009 04:07:46 Check angles 04:07:46 SkyScan query 04:07:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.905<-15927 Statuses=0008 0009 04:07:47 Msec=3000 True Az=112.995 Ze=-58.905 Az status=0008 Ze status=0009 04:07:47 Check angles 04:07:47 SkyScan query 04:07:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.92<-14528 Statuses=0008 0009 04:07:48 Msec=3750 True Az=112.995 Ze=-37.92 Az status=0008 Ze status=0009 04:07:48 Check angles 04:07:48 SkyScan query 04:07:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.965<-13131 Statuses=0008 0009 04:07:49 Msec=4500 True Az=112.995 Ze=-16.965 Az status=0008 Ze status=0009 04:07:49 Check angles 04:07:49 SkyScan query 04:07:49 SkyScan query done: ret=0 az=112.995<-7533 ze=3.975<-11735 Statuses=0008 0009 04:07:49 Msec=5250 True Az=112.995 Ze=3.975 Az status=0008 Ze status=0009 04:07:49 Check angles 04:07:49 SkyScan query 04:07:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:07:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:07:50 Message to Master queued w/err=0: serial=111391 error=0 04:07:55 Received message from Master: op=Filter serial=111392 04:07:55 Color wheel filter change from 0 to 0 04:07:55 FLIGetFilterPos err=0 currentPosition=0 04:07:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:07:55 Filter is already there-color wheel unchanged 04:07:55 Received message from Master: op=Shutter serial=111393 04:07:55 Shutter LASER close 04:07:55 Received message from Camera: op=State serial=111395 04:07:55 GetSingleValue result=40 Value=cccccccc 04:07:55 SkyScan query 04:07:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:07:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:56 Parameters OK 04:07:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:56 Set A/D data flow result=40 04:07:56 Set A/D channel type result=40 04:07:56 Set A/D encoding result=40 04:07:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:56 Set channel filter=0.000000e+000 result=40 04:07:56 Config A/D Result=40 04:07:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:56 Get A/D filter: -9.255963e+061 result=40 04:07:56 Get A/D value=-858993460 result=40 04:07:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:56 Parameters OK 04:07:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:56 Set A/D data flow result=40 04:07:56 Set A/D channel type result=40 04:07:56 Set A/D encoding result=40 04:07:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:56 Set channel filter=0.000000e+000 result=40 04:07:56 Config A/D Result=40 04:07:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:56 Get A/D filter: -9.255963e+061 result=40 04:07:56 Get A/D value=-858993460 result=40 04:07:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:07:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:07:56 Aux= 04:07:56 Message to Camera, serial 111395 queued 04:08:33 Received message from Master: op=PointingHead serial=111408 04:08:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:08:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:08:33 Point started: ret=0 04:08:33 point_skyscan result=0 04:08:34 Check angles 04:08:34 SkyScan query 04:08:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:08:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:08:34 Message to Master queued w/err=0: serial=111408 error=0 04:08:39 Received message from Master: op=Filter serial=111409 04:08:39 Color wheel filter change from 0 to 0 04:08:39 FLIGetFilterPos err=0 currentPosition=0 04:08:39 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:39 Filter is already there-color wheel unchanged 04:08:40 Received message from Master: op=Shutter serial=111410 04:08:40 Shutter LASER close 04:08:40 Received message from Camera: op=State serial=111412 04:08:40 GetSingleValue result=40 Value=cccccccc 04:08:40 SkyScan query 04:08:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:08:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:40 Parameters OK 04:08:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:40 Set A/D data flow result=40 04:08:40 Set A/D channel type result=40 04:08:40 Set A/D encoding result=40 04:08:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:40 Set channel filter=0.000000e+000 result=40 04:08:40 Config A/D Result=40 04:08:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:40 Get A/D filter: -9.255963e+061 result=40 04:08:40 Get A/D value=-858993460 result=40 04:08:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:40 Parameters OK 04:08:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:40 Set A/D data flow result=40 04:08:40 Set A/D channel type result=40 04:08:40 Set A/D encoding result=40 04:08:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:40 Set channel filter=0.000000e+000 result=40 04:08:40 Config A/D Result=40 04:08:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:40 Get A/D filter: -9.255963e+061 result=40 04:08:40 Get A/D value=-858993460 result=40 04:08:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:40 Aux= 04:08:40 Message to Camera, serial 111412 queued 04:09:17 Received message from Master: op=PointingHead serial=111425 04:09:17 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:09:17 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:09:17 Point started: ret=0 04:09:17 point_skyscan result=0 04:09:18 Check angles 04:09:18 SkyScan query 04:09:19 SkyScan query done: ret=0 az=135.75<-9050 ze=-6.51<-12434 Statuses=0009 0008 04:09:19 Msec=0 True Az=135.75 Ze=-6.51 Az status=0009 Ze status=0008 04:09:19 Check angles 04:09:19 SkyScan query 04:09:20 SkyScan query done: ret=0 az=153.6<-10240 ze=-6.495<-12433 Statuses=0009 0008 04:09:20 Msec=750 True Az=153.6 Ze=-6.495 Az status=0009 Ze status=0008 04:09:20 Check angles 04:09:20 SkyScan query 04:09:20 SkyScan query done: ret=0 az=171.105<-11407 ze=-6.495<-12433 Statuses=0009 0008 04:09:20 Msec=1500 True Az=171.105 Ze=-6.495 Az status=0009 Ze status=0008 04:09:20 Check angles 04:09:20 SkyScan query 04:09:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:09:21 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:09:21 Message to Master queued w/err=0: serial=111425 error=0 04:09:26 Received message from Master: op=Filter serial=111426 04:09:26 Color wheel filter change from 0 to 0 04:09:26 FLIGetFilterPos err=0 currentPosition=0 04:09:26 FLIGetStepsRemaining err=0 RemainingSteps=0 04:09:26 Filter is already there-color wheel unchanged 04:09:26 Received message from Master: op=Shutter serial=111427 04:09:26 Shutter LASER close 04:09:26 Received message from Camera: op=State serial=111429 04:09:26 GetSingleValue result=40 Value=cccccccc 04:09:26 SkyScan query 04:09:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:09:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:27 Parameters OK 04:09:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:27 Set A/D data flow result=40 04:09:27 Set A/D channel type result=40 04:09:27 Set A/D encoding result=40 04:09:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:27 Set channel filter=0.000000e+000 result=40 04:09:27 Config A/D Result=40 04:09:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:27 Get A/D filter: -9.255963e+061 result=40 04:09:27 Get A/D value=-858993460 result=40 04:09:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:27 Parameters OK 04:09:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:27 Set A/D data flow result=40 04:09:27 Set A/D channel type result=40 04:09:27 Set A/D encoding result=40 04:09:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:27 Set channel filter=0.000000e+000 result=40 04:09:27 Config A/D Result=40 04:09:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:27 Get A/D filter: -9.255963e+061 result=40 04:09:27 Get A/D value=-858993460 result=40 04:09:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:09:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:09:27 Aux= 04:09:27 Message to Camera, serial 111429 queued 04:10:04 Received message from Master: op=PointingHead serial=111442 04:10:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:10:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:10:04 Point started: ret=0 04:10:04 point_skyscan result=0 04:10:05 Check angles 04:10:05 SkyScan query 04:10:05 SkyScan query done: ret=0 az=153.075<-10205 ze=6.51<-11566 Statuses=0009 0008 04:10:05 Msec=0 True Az=153.075 Ze=6.51 Az status=0009 Ze status=0008 04:10:05 Check angles 04:10:05 SkyScan query 04:10:06 SkyScan query done: ret=0 az=135.6<-9040 ze=6.495<-11567 Statuses=0009 0008 04:10:06 Msec=750 True Az=135.6 Ze=6.495 Az status=0009 Ze status=0008 04:10:06 Check angles 04:10:06 SkyScan query 04:10:07 SkyScan query done: ret=0 az=118.08<-7872 ze=6.495<-11567 Statuses=0009 0008 04:10:07 Msec=1500 True Az=118.08 Ze=6.495 Az status=0009 Ze status=0008 04:10:07 Check angles 04:10:07 SkyScan query 04:10:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:10:08 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:10:08 Message to Master queued w/err=0: serial=111442 error=0 04:10:13 Received message from Master: op=Filter serial=111443 04:10:13 Color wheel filter change from 0 to 0 04:10:13 FLIGetFilterPos err=0 currentPosition=0 04:10:13 FLIGetStepsRemaining err=0 RemainingSteps=0 04:10:13 Filter is already there-color wheel unchanged 04:10:13 Received message from Master: op=Shutter serial=111444 04:10:13 Shutter LASER close 04:10:13 Received message from Camera: op=State serial=111446 04:10:13 GetSingleValue result=40 Value=cccccccc 04:10:13 SkyScan query 04:10:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:10:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:13 Parameters OK 04:10:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:13 Set A/D data flow result=40 04:10:13 Set A/D channel type result=40 04:10:13 Set A/D encoding result=40 04:10:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:13 Set channel filter=0.000000e+000 result=40 04:10:13 Config A/D Result=40 04:10:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:13 Get A/D filter: -9.255963e+061 result=40 04:10:13 Get A/D value=-858993460 result=40 04:10:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:13 Parameters OK 04:10:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:13 Set A/D data flow result=40 04:10:13 Set A/D channel type result=40 04:10:13 Set A/D encoding result=40 04:10:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:13 Set channel filter=0.000000e+000 result=40 04:10:13 Config A/D Result=40 04:10:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:13 Get A/D filter: -9.255963e+061 result=40 04:10:13 Get A/D value=-858993460 result=40 04:10:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:10:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:10:13 Aux= 04:10:13 Message to Camera, serial 111446 queued 04:10:50 Received message from Master: op=PointingHead serial=111459 04:10:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:10:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:10:51 Point started: ret=0 04:10:51 point_skyscan result=0 04:10:51 Check angles 04:10:51 SkyScan query 04:10:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 04:10:52 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 04:10:52 Check angles 04:10:52 SkyScan query 04:10:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 04:10:53 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 04:10:53 Check angles 04:10:53 SkyScan query 04:10:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.46<-16364 Statuses=0008 0009 04:10:53 Msec=1500 True Az=112.995 Ze=-65.46 Az status=0008 Ze status=0009 04:10:54 Check angles 04:10:54 SkyScan query 04:10:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.415<-17761 Statuses=0008 0009 04:10:54 Msec=2250 True Az=112.995 Ze=-86.415 Az status=0008 Ze status=0009 04:10:54 Check angles 04:10:54 SkyScan query 04:10:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.355<-19157 Statuses=0008 0009 04:10:55 Msec=3000 True Az=112.995 Ze=-107.355 Az status=0008 Ze status=0009 04:10:55 Check angles 04:10:55 SkyScan query 04:10:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.31<-20554 Statuses=0008 0009 04:10:56 Msec=3750 True Az=112.995 Ze=-128.31 Az status=0008 Ze status=0009 04:10:56 Check angles 04:10:56 SkyScan query 04:10:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.25<-21950 Statuses=0008 0009 04:10:56 Msec=4500 True Az=112.995 Ze=-149.25 Az status=0008 Ze status=0009 04:10:57 Check angles 04:10:57 SkyScan query 04:10:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.22<-23348 Statuses=0008 0009 04:10:57 Msec=5250 True Az=112.995 Ze=-170.22 Az status=0008 Ze status=0009 04:10:57 Check angles 04:10:57 SkyScan query 04:10:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:10:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:10:58 Message to Master queued w/err=0: serial=111459 error=0 04:11:03 Received message from Master: op=Filter serial=111460 04:11:03 Color wheel filter change from 0 to 0 04:11:03 FLIGetFilterPos err=0 currentPosition=0 04:11:03 FLIGetStepsRemaining err=0 RemainingSteps=0 04:11:03 Filter is already there-color wheel unchanged 04:11:03 Received message from Master: op=Shutter serial=111461 04:11:03 Shutter LASER open 04:11:03 Received message from Camera: op=State serial=111463 04:11:03 GetSingleValue result=40 Value=cccccccc 04:11:03 SkyScan query 04:11:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:11:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:04 Parameters OK 04:11:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:04 Set A/D data flow result=40 04:11:04 Set A/D channel type result=40 04:11:04 Set A/D encoding result=40 04:11:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:04 Set channel filter=0.000000e+000 result=40 04:11:04 Config A/D Result=40 04:11:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:04 Get A/D filter: -9.255963e+061 result=40 04:11:04 Get A/D value=-858993460 result=40 04:11:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:04 Parameters OK 04:11:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:04 Set A/D data flow result=40 04:11:04 Set A/D channel type result=40 04:11:04 Set A/D encoding result=40 04:11:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:04 Set channel filter=0.000000e+000 result=40 04:11:04 Config A/D Result=40 04:11:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:04 Get A/D filter: -9.255963e+061 result=40 04:11:04 Get A/D value=-858993460 result=40 04:11:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:11:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:11:04 Aux= 04:11:04 Message to Camera, serial 111463 queued 04:11:12 Received message from Master: op=Shutter serial=111473 04:11:12 Shutter LASER close 04:11:13 Received message from Master: op=PointingHead serial=111477 04:11:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:11:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:11:13 Point started: ret=0 04:11:13 point_skyscan result=0 04:11:14 Check angles 04:11:14 SkyScan query 04:11:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 04:11:14 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 04:11:15 Check angles 04:11:15 SkyScan query 04:11:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.25<-20150 Statuses=0008 0009 04:11:15 Msec=750 True Az=112.995 Ze=-122.25 Az status=0008 Ze status=0009 04:11:15 Check angles 04:11:15 SkyScan query 04:11:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.28<-18752 Statuses=0008 0009 04:11:16 Msec=1500 True Az=112.995 Ze=-101.28 Az status=0008 Ze status=0009 04:11:16 Check angles 04:11:16 SkyScan query 04:11:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.905<-17327 Statuses=0008 0009 04:11:17 Msec=2250 True Az=112.995 Ze=-79.905 Az status=0008 Ze status=0009 04:11:17 Check angles 04:11:17 SkyScan query 04:11:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.47<-15898 Statuses=0008 0009 04:11:17 Msec=3000 True Az=112.995 Ze=-58.47 Az status=0008 Ze status=0009 04:11:18 Check angles 04:11:18 SkyScan query 04:11:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.545<-14503 Statuses=0008 0009 04:11:18 Msec=3750 True Az=112.995 Ze=-37.545 Az status=0008 Ze status=0009 04:11:18 Check angles 04:11:18 SkyScan query 04:11:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.14<-13076 Statuses=0008 0009 04:11:19 Msec=4500 True Az=112.995 Ze=-16.14 Az status=0008 Ze status=0009 04:11:19 Check angles 04:11:19 SkyScan query 04:11:20 SkyScan query done: ret=0 az=112.995<-7533 ze=4.965<-11669 Statuses=0008 0009 04:11:20 Msec=5250 True Az=112.995 Ze=4.965 Az status=0008 Ze status=0009 04:11:20 Check angles 04:11:20 SkyScan query 04:11:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:11:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:11:20 Message to Master queued w/err=0: serial=111477 error=0 04:11:25 Received message from Master: op=Filter serial=111478 04:11:25 Color wheel filter change from 0 to 0 04:11:25 FLIGetFilterPos err=0 currentPosition=0 04:11:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:11:25 Filter is already there-color wheel unchanged 04:11:26 Received message from Master: op=Shutter serial=111479 04:11:26 Shutter LASER close 04:11:26 Received message from Camera: op=State serial=111481 04:11:26 GetSingleValue result=40 Value=cccccccc 04:11:26 SkyScan query 04:11:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:11:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:26 Parameters OK 04:11:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:26 Set A/D data flow result=40 04:11:26 Set A/D channel type result=40 04:11:26 Set A/D encoding result=40 04:11:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:26 Set channel filter=0.000000e+000 result=40 04:11:26 Config A/D Result=40 04:11:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:26 Get A/D filter: -9.255963e+061 result=40 04:11:26 Get A/D value=-858993460 result=40 04:11:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:26 Parameters OK 04:11:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:26 Set A/D data flow result=40 04:11:26 Set A/D channel type result=40 04:11:26 Set A/D encoding result=40 04:11:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:26 Set channel filter=0.000000e+000 result=40 04:11:26 Config A/D Result=40 04:11:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:26 Get A/D filter: -9.255963e+061 result=40 04:11:26 Get A/D value=-858993460 result=40 04:11:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:11:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:11:26 Aux= 04:11:26 Message to Camera, serial 111481 queued 04:12:03 Received message from Master: op=PointingHead serial=111494 04:12:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:12:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:12:04 Point started: ret=0 04:12:04 point_skyscan result=0 04:12:04 Check angles 04:12:04 SkyScan query 04:12:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:12:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:12:05 Message to Master queued w/err=0: serial=111494 error=0 04:12:10 Received message from Master: op=Filter serial=111495 04:12:10 Color wheel filter change from 0 to 0 04:12:10 FLIGetFilterPos err=0 currentPosition=0 04:12:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:10 Filter is already there-color wheel unchanged 04:12:10 Received message from Master: op=Shutter serial=111496 04:12:10 Shutter LASER close 04:12:10 Received message from Camera: op=State serial=111498 04:12:10 GetSingleValue result=40 Value=cccccccc 04:12:10 SkyScan query 04:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:12:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:11 Parameters OK 04:12:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:11 Set A/D data flow result=40 04:12:11 Set A/D channel type result=40 04:12:11 Set A/D encoding result=40 04:12:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:11 Set channel filter=0.000000e+000 result=40 04:12:11 Config A/D Result=40 04:12:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:11 Get A/D filter: -9.255963e+061 result=40 04:12:11 Get A/D value=-858993460 result=40 04:12:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:11 Parameters OK 04:12:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:11 Set A/D data flow result=40 04:12:11 Set A/D channel type result=40 04:12:11 Set A/D encoding result=40 04:12:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:11 Set channel filter=0.000000e+000 result=40 04:12:11 Config A/D Result=40 04:12:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:11 Get A/D filter: -9.255963e+061 result=40 04:12:11 Get A/D value=-858993460 result=40 04:12:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:11 Aux= 04:12:11 Message to Camera, serial 111498 queued 04:12:48 Received message from Master: op=PointingHead serial=111511 04:12:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:12:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:12:48 Point started: ret=0 04:12:48 point_skyscan result=0 04:12:49 Check angles 04:12:49 SkyScan query 04:12:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:12:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:12:49 Message to Master queued w/err=0: serial=111511 error=0 04:12:54 Received message from Master: op=Filter serial=111512 04:12:54 Color wheel filter change from 0 to 0 04:12:54 FLIGetFilterPos err=0 currentPosition=0 04:12:54 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:54 Filter is already there-color wheel unchanged 04:12:54 Received message from Master: op=Shutter serial=111513 04:12:54 Shutter LASER close 04:12:54 Received message from Camera: op=State serial=111515 04:12:54 GetSingleValue result=40 Value=cccccccc 04:12:54 SkyScan query 04:12:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:12:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:55 Parameters OK 04:12:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:55 Set A/D data flow result=40 04:12:55 Set A/D channel type result=40 04:12:55 Set A/D encoding result=40 04:12:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:55 Set channel filter=0.000000e+000 result=40 04:12:55 Config A/D Result=40 04:12:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:55 Get A/D filter: -9.255963e+061 result=40 04:12:55 Get A/D value=-858993460 result=40 04:12:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:55 Parameters OK 04:12:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:55 Set A/D data flow result=40 04:12:55 Set A/D channel type result=40 04:12:55 Set A/D encoding result=40 04:12:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:55 Set channel filter=0.000000e+000 result=40 04:12:55 Config A/D Result=40 04:12:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:55 Get A/D filter: -9.255963e+061 result=40 04:12:55 Get A/D value=-858993460 result=40 04:12:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:55 Aux= 04:12:55 Message to Camera, serial 111515 queued 04:13:32 Received message from Master: op=PointingHead serial=111528 04:13:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:13:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:13:32 Point started: ret=0 04:13:32 point_skyscan result=0 04:13:33 Check angles 04:13:33 SkyScan query 04:13:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:13:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:13:33 Message to Master queued w/err=0: serial=111528 error=0 04:13:38 Received message from Master: op=Filter serial=111529 04:13:38 Color wheel filter change from 0 to 0 04:13:38 FLIGetFilterPos err=0 currentPosition=0 04:13:38 FLIGetStepsRemaining err=0 RemainingSteps=0 04:13:38 Filter is already there-color wheel unchanged 04:13:39 Received message from Master: op=Shutter serial=111530 04:13:39 Shutter LASER close 04:13:39 Received message from Camera: op=State serial=111532 04:13:39 GetSingleValue result=40 Value=cccccccc 04:13:39 SkyScan query 04:13:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:13:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:39 Parameters OK 04:13:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:39 Set A/D data flow result=40 04:13:39 Set A/D channel type result=40 04:13:39 Set A/D encoding result=40 04:13:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:39 Set channel filter=0.000000e+000 result=40 04:13:39 Config A/D Result=40 04:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:39 Get A/D filter: -9.255963e+061 result=40 04:13:39 Get A/D value=-858993460 result=40 04:13:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:39 Parameters OK 04:13:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:39 Set A/D data flow result=40 04:13:39 Set A/D channel type result=40 04:13:39 Set A/D encoding result=40 04:13:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:39 Set channel filter=0.000000e+000 result=40 04:13:39 Config A/D Result=40 04:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:39 Get A/D filter: -9.255963e+061 result=40 04:13:39 Get A/D value=-858993460 result=40 04:13:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:13:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:13:39 Aux= 04:13:39 Message to Camera, serial 111532 queued 04:14:16 Received message from Master: op=PointingHead serial=111545 04:14:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:14:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:14:16 Point started: ret=0 04:14:16 point_skyscan result=0 04:14:17 Check angles 04:14:17 SkyScan query 04:14:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 04:14:18 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 04:14:18 Check angles 04:14:18 SkyScan query 04:14:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 [UTC 2019-3-5 04:14:19] 04:14:19 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 04:14:19 Check angles 04:14:19 SkyScan query 04:14:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.955<-16397 Statuses=0008 0009 04:14:19 Msec=1500 True Az=112.995 Ze=-65.955 Az status=0008 Ze status=0009 04:14:19 Check angles 04:14:19 SkyScan query 04:14:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.895<-17793 Statuses=0008 0009 04:14:20 Msec=2250 True Az=112.995 Ze=-86.895 Az status=0008 Ze status=0009 04:14:20 Check angles 04:14:20 SkyScan query 04:14:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.835<-19189 Statuses=0008 0009 04:14:21 Msec=3000 True Az=112.995 Ze=-107.835 Az status=0008 Ze status=0009 04:14:21 Check angles 04:14:21 SkyScan query 04:14:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.775<-20585 Statuses=0008 0009 04:14:22 Msec=3750 True Az=112.995 Ze=-128.775 Az status=0008 Ze status=0009 04:14:22 Check angles 04:14:22 SkyScan query 04:14:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.195<-22013 Statuses=0008 0009 04:14:22 Msec=4500 True Az=112.995 Ze=-150.195 Az status=0008 Ze status=0009 04:14:22 Check angles 04:14:22 SkyScan query 04:14:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.03<-23402 Statuses=0008 0009 04:14:23 Msec=5250 True Az=112.995 Ze=-171.03 Az status=0008 Ze status=0009 04:14:23 Check angles 04:14:23 SkyScan query 04:14:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:14:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:14:24 Message to Master queued w/err=0: serial=111545 error=0 04:14:29 Received message from Master: op=Filter serial=111546 04:14:29 Color wheel filter change from 0 to 0 04:14:29 FLIGetFilterPos err=0 currentPosition=0 04:14:29 FLIGetStepsRemaining err=0 RemainingSteps=0 04:14:29 Filter is already there-color wheel unchanged 04:14:29 Received message from Master: op=Shutter serial=111547 04:14:29 Shutter LASER open 04:14:29 Received message from Camera: op=State serial=111549 04:14:29 GetSingleValue result=40 Value=cccccccc 04:14:29 SkyScan query 04:14:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:14:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:30 Parameters OK 04:14:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:30 Set A/D data flow result=40 04:14:30 Set A/D channel type result=40 04:14:30 Set A/D encoding result=40 04:14:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:30 Set channel filter=0.000000e+000 result=40 04:14:30 Config A/D Result=40 04:14:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:30 Get A/D filter: -9.255963e+061 result=40 04:14:30 Get A/D value=-858993460 result=40 04:14:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:30 Parameters OK 04:14:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:30 Set A/D data flow result=40 04:14:30 Set A/D channel type result=40 04:14:30 Set A/D encoding result=40 04:14:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:30 Set channel filter=0.000000e+000 result=40 04:14:30 Config A/D Result=40 04:14:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:30 Get A/D filter: -9.255963e+061 result=40 04:14:30 Get A/D value=-858993460 result=40 04:14:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:14:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:14:30 Aux= 04:14:30 Message to Camera, serial 111549 queued 04:14:38 Received message from Master: op=Shutter serial=111559 04:14:38 Shutter LASER close 04:14:39 Received message from Master: op=PointingHead serial=111563 04:14:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:14:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:14:39 Point started: ret=0 04:14:39 point_skyscan result=0 04:14:40 Check angles 04:14:40 SkyScan query 04:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.875<-21525 Statuses=0008 0009 04:14:40 Msec=0 True Az=112.995 Ze=-142.875 Az status=0008 Ze status=0009 04:14:41 Check angles 04:14:41 SkyScan query 04:14:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.905<-20127 Statuses=0008 0009 04:14:41 Msec=750 True Az=112.995 Ze=-121.905 Az status=0008 Ze status=0009 04:14:41 Check angles 04:14:41 SkyScan query 04:14:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.98<-18732 Statuses=0008 0009 04:14:42 Msec=1500 True Az=112.995 Ze=-100.98 Az status=0008 Ze status=0009 04:14:42 Check angles 04:14:42 SkyScan query 04:14:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.04<-17336 Statuses=0008 0009 04:14:43 Msec=2250 True Az=112.995 Ze=-80.04 Az status=0008 Ze status=0009 04:14:43 Check angles 04:14:43 SkyScan query 04:14:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.085<-15939 Statuses=0008 0009 04:14:43 Msec=3000 True Az=112.995 Ze=-59.085 Az status=0008 Ze status=0009 04:14:44 Check angles 04:14:44 SkyScan query 04:14:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.085<-14539 Statuses=0008 0009 04:14:44 Msec=3750 True Az=112.995 Ze=-38.085 Az status=0008 Ze status=0009 04:14:44 Check angles 04:14:44 SkyScan query 04:14:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.145<-13143 Statuses=0008 0009 04:14:45 Msec=4500 True Az=112.995 Ze=-17.145 Az status=0008 Ze status=0009 04:14:45 Check angles 04:14:45 SkyScan query 04:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=3.81<-11746 Statuses=0008 0009 04:14:46 Msec=5250 True Az=112.995 Ze=3.81 Az status=0008 Ze status=0009 04:14:46 Check angles 04:14:46 SkyScan query 04:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:14:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:14:46 Message to Master queued w/err=0: serial=111563 error=0 04:14:51 Received message from Master: op=Filter serial=111564 04:14:51 Color wheel filter change from 0 to 0 04:14:51 FLIGetFilterPos err=0 currentPosition=0 04:14:51 FLIGetStepsRemaining err=0 RemainingSteps=0 04:14:51 Filter is already there-color wheel unchanged 04:14:52 Received message from Master: op=Shutter serial=111565 04:14:52 Shutter LASER close 04:14:52 Received message from Camera: op=State serial=111567 04:14:52 GetSingleValue result=40 Value=cccccccc 04:14:52 SkyScan query 04:14:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:14:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:52 Parameters OK 04:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:52 Set A/D data flow result=40 04:14:52 Set A/D channel type result=40 04:14:52 Set A/D encoding result=40 04:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:52 Set channel filter=0.000000e+000 result=40 04:14:52 Config A/D Result=40 04:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:52 Get A/D filter: -9.255963e+061 result=40 04:14:52 Get A/D value=-858993460 result=40 04:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:52 Parameters OK 04:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:52 Set A/D data flow result=40 04:14:52 Set A/D channel type result=40 04:14:52 Set A/D encoding result=40 04:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:52 Set channel filter=0.000000e+000 result=40 04:14:52 Config A/D Result=40 04:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:52 Get A/D filter: -9.255963e+061 result=40 04:14:52 Get A/D value=-858993460 result=40 04:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:14:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:14:52 Aux= 04:14:52 Message to Camera, serial 111567 queued 04:15:29 Received message from Master: op=PointingHead serial=111580 04:15:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:15:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:15:30 Point started: ret=0 04:15:30 point_skyscan result=0 04:15:30 Check angles 04:15:30 SkyScan query 04:15:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:15:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:15:31 Message to Master queued w/err=0: serial=111580 error=0 04:15:36 Received message from Master: op=Filter serial=111581 04:15:36 Color wheel filter change from 0 to 0 04:15:36 FLIGetFilterPos err=0 currentPosition=0 04:15:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:36 Filter is already there-color wheel unchanged 04:15:36 Received message from Master: op=Shutter serial=111582 04:15:36 Shutter LASER close 04:15:36 Received message from Camera: op=State serial=111584 04:15:36 GetSingleValue result=40 Value=cccccccc 04:15:36 SkyScan query 04:15:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:15:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:37 Parameters OK 04:15:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:37 Set A/D data flow result=40 04:15:37 Set A/D channel type result=40 04:15:37 Set A/D encoding result=40 04:15:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:37 Set channel filter=0.000000e+000 result=40 04:15:37 Config A/D Result=40 04:15:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:37 Get A/D filter: -9.255963e+061 result=40 04:15:37 Get A/D value=-858993460 result=40 04:15:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:37 Parameters OK 04:15:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:37 Set A/D data flow result=40 04:15:37 Set A/D channel type result=40 04:15:37 Set A/D encoding result=40 04:15:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:37 Set channel filter=0.000000e+000 result=40 04:15:37 Config A/D Result=40 04:15:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:37 Get A/D filter: -9.255963e+061 result=40 04:15:37 Get A/D value=-858993460 result=40 04:15:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:37 Aux= 04:15:37 Message to Camera, serial 111584 queued 04:16:13 Received message from Master: op=PointingHead serial=111597 04:16:13 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:16:13 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:16:14 Point started: ret=0 04:16:14 point_skyscan result=0 04:16:15 Check angles 04:16:15 SkyScan query 04:16:15 SkyScan query done: ret=0 az=136.17<-9078 ze=-6.51<-12434 Statuses=0009 0008 04:16:15 Msec=0 True Az=136.17 Ze=-6.51 Az status=0009 Ze status=0008 04:16:15 Check angles 04:16:15 SkyScan query 04:16:16 SkyScan query done: ret=0 az=153.705<-10247 ze=-6.495<-12433 Statuses=0009 0008 04:16:16 Msec=750 True Az=153.705 Ze=-6.495 Az status=0009 Ze status=0008 04:16:16 Check angles 04:16:16 SkyScan query 04:16:17 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 04:16:17 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 04:16:17 Check angles 04:16:17 SkyScan query 04:16:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:16:17 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:16:17 Message to Master queued w/err=0: serial=111597 error=0 04:16:22 Received message from Master: op=Filter serial=111598 04:16:22 Color wheel filter change from 0 to 0 04:16:22 FLIGetFilterPos err=0 currentPosition=0 04:16:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:16:22 Filter is already there-color wheel unchanged 04:16:23 Received message from Master: op=Shutter serial=111599 04:16:23 Shutter LASER close 04:16:23 Received message from Camera: op=State serial=111601 04:16:23 GetSingleValue result=40 Value=cccccccc 04:16:23 SkyScan query 04:16:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:16:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:23 Parameters OK 04:16:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:23 Set A/D data flow result=40 04:16:23 Set A/D channel type result=40 04:16:23 Set A/D encoding result=40 04:16:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:23 Set channel filter=0.000000e+000 result=40 04:16:23 Config A/D Result=40 04:16:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:23 Get A/D filter: -9.255963e+061 result=40 04:16:23 Get A/D value=-858993460 result=40 04:16:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:23 Parameters OK 04:16:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:23 Set A/D data flow result=40 04:16:23 Set A/D channel type result=40 04:16:23 Set A/D encoding result=40 04:16:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:23 Set channel filter=0.000000e+000 result=40 04:16:23 Config A/D Result=40 04:16:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:23 Get A/D filter: -9.255963e+061 result=40 04:16:23 Get A/D value=-858993460 result=40 04:16:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:16:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:16:23 Aux= 04:16:23 Message to Camera, serial 111601 queued 04:17:00 Received message from Master: op=PointingHead serial=111614 04:17:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:17:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:17:00 Point started: ret=0 04:17:00 point_skyscan result=0 04:17:01 Check angles 04:17:01 SkyScan query 04:17:02 SkyScan query done: ret=0 az=152.595<-10173 ze=6.51<-11566 Statuses=0009 0008 04:17:02 Msec=0 True Az=152.595 Ze=6.51 Az status=0009 Ze status=0008 04:17:02 Check angles 04:17:02 SkyScan query 04:17:03 SkyScan query done: ret=0 az=135.135<-9009 ze=6.495<-11567 Statuses=0009 0008 04:17:03 Msec=750 True Az=135.135 Ze=6.495 Az status=0009 Ze status=0008 04:17:03 Check angles 04:17:03 SkyScan query 04:17:03 SkyScan query done: ret=0 az=117.66<-7844 ze=6.495<-11567 Statuses=0009 0008 04:17:03 Msec=1500 True Az=117.66 Ze=6.495 Az status=0009 Ze status=0008 04:17:03 Check angles 04:17:03 SkyScan query 04:17:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:17:04 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:17:04 Message to Master queued w/err=0: serial=111614 error=0 04:17:09 Received message from Master: op=Filter serial=111615 04:17:09 Color wheel filter change from 0 to 0 04:17:09 FLIGetFilterPos err=0 currentPosition=0 04:17:09 FLIGetStepsRemaining err=0 RemainingSteps=0 04:17:09 Filter is already there-color wheel unchanged 04:17:09 Received message from Master: op=Shutter serial=111616 04:17:09 Shutter LASER close 04:17:09 Received message from Camera: op=State serial=111618 04:17:09 GetSingleValue result=40 Value=cccccccc 04:17:09 SkyScan query 04:17:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:17:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:10 Parameters OK 04:17:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:10 Set A/D data flow result=40 04:17:10 Set A/D channel type result=40 04:17:10 Set A/D encoding result=40 04:17:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:10 Set channel filter=0.000000e+000 result=40 04:17:10 Config A/D Result=40 04:17:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:10 Get A/D filter: -9.255963e+061 result=40 04:17:10 Get A/D value=-858993460 result=40 04:17:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:10 Parameters OK 04:17:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:10 Set A/D data flow result=40 04:17:10 Set A/D channel type result=40 04:17:10 Set A/D encoding result=40 04:17:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:10 Set channel filter=0.000000e+000 result=40 04:17:10 Config A/D Result=40 04:17:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:10 Get A/D filter: -9.255963e+061 result=40 04:17:10 Get A/D value=-858993460 result=40 04:17:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:17:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:17:10 Aux= 04:17:10 Message to Camera, serial 111618 queued 04:17:47 Received message from Master: op=PointingHead serial=111631 04:17:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:17:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:17:47 Point started: ret=0 04:17:47 point_skyscan result=0 04:17:48 Check angles 04:17:48 SkyScan query 04:17:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 04:17:48 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 04:17:49 Check angles 04:17:49 SkyScan query 04:17:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 04:17:49 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 04:17:49 Check angles 04:17:49 SkyScan query 04:17:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.085<-16339 Statuses=0008 0009 04:17:50 Msec=1500 True Az=112.995 Ze=-65.085 Az status=0008 Ze status=0009 04:17:50 Check angles 04:17:50 SkyScan query 04:17:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 04:17:51 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 04:17:51 Check angles 04:17:51 SkyScan query 04:17:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.43<-19162 Statuses=0008 0009 04:17:51 Msec=3000 True Az=112.995 Ze=-107.43 Az status=0008 Ze status=0009 04:17:52 Check angles 04:17:52 SkyScan query 04:17:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.37<-20558 Statuses=0008 0009 04:17:52 Msec=3750 True Az=112.995 Ze=-128.37 Az status=0008 Ze status=0009 04:17:52 Check angles 04:17:52 SkyScan query 04:17:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.76<-21984 Statuses=0008 0009 04:17:53 Msec=4500 True Az=112.995 Ze=-149.76 Az status=0008 Ze status=0009 04:17:53 Check angles 04:17:53 SkyScan query 04:17:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 04:17:54 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 04:17:54 Check angles 04:17:54 SkyScan query 04:17:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:17:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:17:54 Message to Master queued w/err=0: serial=111631 error=0 04:17:59 Received message from Master: op=Filter serial=111632 04:17:59 Color wheel filter change from 0 to 0 04:17:59 FLIGetFilterPos err=0 currentPosition=0 04:17:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:17:59 Filter is already there-color wheel unchanged 04:18:00 Received message from Master: op=Shutter serial=111633 04:18:00 Shutter LASER open 04:18:00 Received message from Camera: op=State serial=111635 04:18:00 GetSingleValue result=40 Value=cccccccc 04:18:00 SkyScan query 04:18:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:18:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:00 Parameters OK 04:18:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:00 Set A/D data flow result=40 04:18:00 Set A/D channel type result=40 04:18:00 Set A/D encoding result=40 04:18:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:00 Set channel filter=0.000000e+000 result=40 04:18:00 Config A/D Result=40 04:18:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:00 Get A/D filter: -9.255963e+061 result=40 04:18:00 Get A/D value=-858993460 result=40 04:18:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:00 Parameters OK 04:18:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:00 Set A/D data flow result=40 04:18:00 Set A/D channel type result=40 04:18:00 Set A/D encoding result=40 04:18:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:00 Set channel filter=0.000000e+000 result=40 04:18:00 Config A/D Result=40 04:18:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:00 Get A/D filter: -9.255963e+061 result=40 04:18:00 Get A/D value=-858993460 result=40 04:18:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:00 Aux= 04:18:00 Message to Camera, serial 111635 queued 04:18:09 Received message from Master: op=Shutter serial=111645 04:18:09 Shutter LASER close 04:18:09 Received message from Master: op=PointingHead serial=111649 04:18:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:18:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:18:10 Point started: ret=0 04:18:10 point_skyscan result=0 04:18:10 Check angles 04:18:10 SkyScan query 04:18:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 04:18:11 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 04:18:11 Check angles 04:18:11 SkyScan query 04:18:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.74<-20116 Statuses=0008 0009 04:18:12 Msec=750 True Az=112.995 Ze=-121.74 Az status=0008 Ze status=0009 04:18:12 Check angles 04:18:12 SkyScan query 04:18:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.2<-18680 Statuses=0008 0009 04:18:12 Msec=1500 True Az=112.995 Ze=-100.2 Az status=0008 Ze status=0009 04:18:13 Check angles 04:18:13 SkyScan query 04:18:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.38<-17292 Statuses=0008 0009 04:18:13 Msec=2250 True Az=112.995 Ze=-79.38 Az status=0008 Ze status=0009 04:18:13 Check angles 04:18:13 SkyScan query 04:18:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.425<-15895 Statuses=0008 0009 04:18:14 Msec=3000 True Az=112.995 Ze=-58.425 Az status=0008 Ze status=0009 04:18:14 Check angles 04:18:14 SkyScan query 04:18:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.5<-14500 Statuses=0008 0009 04:18:15 Msec=3750 True Az=112.995 Ze=-37.5 Az status=0008 Ze status=0009 04:18:15 Check angles 04:18:15 SkyScan query 04:18:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.515<-13101 Statuses=0008 0009 04:18:15 Msec=4500 True Az=112.995 Ze=-16.515 Az status=0008 Ze status=0009 04:18:16 Check angles 04:18:16 SkyScan query 04:18:16 SkyScan query done: ret=0 az=112.995<-7533 ze=4.365<-11709 Statuses=0008 0009 04:18:16 Msec=5250 True Az=112.995 Ze=4.365 Az status=0008 Ze status=0009 04:18:16 Check angles 04:18:16 SkyScan query 04:18:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:18:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:18:17 Message to Master queued w/err=0: serial=111649 error=0 04:18:22 Received message from Master: op=Filter serial=111650 04:18:22 Color wheel filter change from 0 to 0 04:18:22 FLIGetFilterPos err=0 currentPosition=0 04:18:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:18:22 Filter is already there-color wheel unchanged 04:18:22 Received message from Master: op=Shutter serial=111651 04:18:22 Shutter LASER close 04:18:22 Received message from Camera: op=State serial=111653 04:18:22 GetSingleValue result=40 Value=cccccccc 04:18:22 SkyScan query 04:18:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:18:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:23 Parameters OK 04:18:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:23 Set A/D data flow result=40 04:18:23 Set A/D channel type result=40 04:18:23 Set A/D encoding result=40 04:18:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:23 Set channel filter=0.000000e+000 result=40 04:18:23 Config A/D Result=40 04:18:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:23 Get A/D filter: -9.255963e+061 result=40 04:18:23 Get A/D value=-858993460 result=40 04:18:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:23 Parameters OK 04:18:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:23 Set A/D data flow result=40 04:18:23 Set A/D channel type result=40 04:18:23 Set A/D encoding result=40 04:18:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:23 Set channel filter=0.000000e+000 result=40 04:18:23 Config A/D Result=40 04:18:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:23 Get A/D filter: -9.255963e+061 result=40 04:18:23 Get A/D value=-858993460 result=40 04:18:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:23 Aux= 04:18:23 Message to Camera, serial 111653 queued 04:19:00 Received message from Master: op=PointingHead serial=111666 04:19:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:19:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:19:00 Point started: ret=0 04:19:00 point_skyscan result=0 04:19:01 Check angles 04:19:01 SkyScan query 04:19:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:19:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:19:01 Message to Master queued w/err=0: serial=111666 error=0 04:19:06 Received message from Master: op=Filter serial=111667 04:19:06 Color wheel filter change from 0 to 0 04:19:06 FLIGetFilterPos err=0 currentPosition=0 04:19:06 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:06 Filter is already there-color wheel unchanged 04:19:06 Received message from Master: op=Shutter serial=111668 04:19:06 Shutter LASER close 04:19:07 Received message from Camera: op=State serial=111670 04:19:07 GetSingleValue result=40 Value=cccccccc 04:19:07 SkyScan query 04:19:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:19:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:07 Parameters OK 04:19:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:07 Set A/D data flow result=40 04:19:07 Set A/D channel type result=40 04:19:07 Set A/D encoding result=40 04:19:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:07 Set channel filter=0.000000e+000 result=40 04:19:07 Config A/D Result=40 04:19:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:07 Get A/D filter: -9.255963e+061 result=40 04:19:07 Get A/D value=-858993460 result=40 04:19:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:07 Parameters OK 04:19:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:07 Set A/D data flow result=40 04:19:07 Set A/D channel type result=40 04:19:07 Set A/D encoding result=40 04:19:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:07 Set channel filter=0.000000e+000 result=40 04:19:07 Config A/D Result=40 04:19:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:07 Get A/D filter: -9.255963e+061 result=40 04:19:07 Get A/D value=-858993460 result=40 04:19:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:07 Aux= 04:19:07 Message to Camera, serial 111670 queued 04:19:44 Received message from Master: op=PointingHead serial=111683 04:19:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:19:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:19:44 Point started: ret=0 04:19:44 point_skyscan result=0 04:19:45 Check angles 04:19:45 SkyScan query 04:19:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:19:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:19:46 Message to Master queued w/err=0: serial=111683 error=0 04:19:51 Received message from Master: op=Filter serial=111684 04:19:51 Color wheel filter change from 0 to 0 04:19:51 FLIGetFilterPos err=0 currentPosition=0 04:19:51 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:51 Filter is already there-color wheel unchanged 04:19:51 Received message from Master: op=Shutter serial=111685 04:19:51 Shutter LASER close 04:19:51 Received message from Camera: op=State serial=111687 04:19:51 GetSingleValue result=40 Value=cccccccc 04:19:51 SkyScan query 04:19:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:19:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:51 Parameters OK 04:19:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:51 Set A/D data flow result=40 04:19:51 Set A/D channel type result=40 04:19:51 Set A/D encoding result=40 04:19:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:51 Set channel filter=0.000000e+000 result=40 04:19:51 Config A/D Result=40 04:19:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:51 Get A/D filter: -9.255963e+061 result=40 04:19:51 Get A/D value=-858993460 result=40 04:19:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:51 Parameters OK 04:19:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:51 Set A/D data flow result=40 04:19:51 Set A/D channel type result=40 04:19:51 Set A/D encoding result=40 04:19:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:51 Set channel filter=0.000000e+000 result=40 04:19:51 Config A/D Result=40 04:19:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:51 Get A/D filter: -9.255963e+061 result=40 04:19:51 Get A/D value=-858993460 result=40 04:19:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:51 Aux= 04:19:51 Message to Camera, serial 111687 queued 04:20:28 Received message from Master: op=PointingHead serial=111700 04:20:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:20:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:20:29 Point started: ret=0 04:20:29 point_skyscan result=0 04:20:29 Check angles 04:20:29 SkyScan query 04:20:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:20:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:20:30 Message to Master queued w/err=0: serial=111700 error=0 04:20:35 Received message from Master: op=Filter serial=111701 04:20:35 Color wheel filter change from 0 to 0 04:20:35 FLIGetFilterPos err=0 currentPosition=0 04:20:35 FLIGetStepsRemaining err=0 RemainingSteps=0 04:20:35 Filter is already there-color wheel unchanged 04:20:35 Received message from Master: op=Shutter serial=111702 04:20:35 Shutter LASER close 04:20:35 Received message from Camera: op=State serial=111704 04:20:35 GetSingleValue result=40 Value=cccccccc 04:20:35 SkyScan query 04:20:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:20:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:36 Parameters OK 04:20:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:36 Set A/D data flow result=40 04:20:36 Set A/D channel type result=40 04:20:36 Set A/D encoding result=40 04:20:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:36 Set channel filter=0.000000e+000 result=40 04:20:36 Config A/D Result=40 04:20:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:36 Get A/D filter: -9.255963e+061 result=40 04:20:36 Get A/D value=-858993460 result=40 04:20:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:36 Parameters OK 04:20:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:36 Set A/D data flow result=40 04:20:36 Set A/D channel type result=40 04:20:36 Set A/D encoding result=40 04:20:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:36 Set channel filter=0.000000e+000 result=40 04:20:36 Config A/D Result=40 04:20:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:36 Get A/D filter: -9.255963e+061 result=40 04:20:36 Get A/D value=-858993460 result=40 04:20:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:20:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:20:36 Aux= 04:20:36 Message to Camera, serial 111704 queued 04:21:13 Received message from Master: op=PointingHead serial=111717 04:21:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:21:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:21:13 Point started: ret=0 04:21:13 point_skyscan result=0 04:21:14 Check angles 04:21:14 SkyScan query 04:21:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 04:21:14 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 04:21:14 Check angles 04:21:14 SkyScan query 04:21:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.295<-14953 Statuses=0008 0009 04:21:15 Msec=750 True Az=112.995 Ze=-44.295 Az status=0008 Ze status=0009 04:21:15 Check angles 04:21:15 SkyScan query 04:21:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.25<-16350 Statuses=0008 0009 04:21:16 Msec=1500 True Az=112.995 Ze=-65.25 Az status=0008 Ze status=0009 04:21:16 Check angles 04:21:16 SkyScan query 04:21:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.205<-17747 Statuses=0008 0009 04:21:16 Msec=2250 True Az=112.995 Ze=-86.205 Az status=0008 Ze status=0009 04:21:17 Check angles 04:21:17 SkyScan query 04:21:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.145<-19143 Statuses=0008 0009 04:21:17 Msec=3000 True Az=112.995 Ze=-107.145 Az status=0008 Ze status=0009 04:21:17 Check angles 04:21:17 SkyScan query 04:21:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.1<-20540 Statuses=0008 0009 04:21:18 Msec=3750 True Az=112.995 Ze=-128.1 Az status=0008 Ze status=0009 04:21:18 Check angles 04:21:18 SkyScan query 04:21:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.07<-21938 Statuses=0008 0009 04:21:19 Msec=4500 True Az=112.995 Ze=-149.07 Az status=0008 Ze status=0009 04:21:19 Check angles 04:21:19 SkyScan query 04:21:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.01<-23334 Statuses=0008 0009 04:21:19 Msec=5250 True Az=112.995 Ze=-170.01 Az status=0008 Ze status=0009 04:21:20 Check angles 04:21:20 SkyScan query 04:21:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:21:20 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:21:20 Message to Master queued w/err=0: serial=111717 error=0 04:21:25 Received message from Master: op=Filter serial=111718 04:21:25 Color wheel filter change from 0 to 0 04:21:25 FLIGetFilterPos err=0 currentPosition=0 04:21:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:21:25 Filter is already there-color wheel unchanged 04:21:25 Received message from Master: op=Shutter serial=111719 04:21:25 Shutter LASER open 04:21:26 Received message from Camera: op=State serial=111721 04:21:26 GetSingleValue result=40 Value=cccccccc 04:21:26 SkyScan query 04:21:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:21:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:26 Parameters OK 04:21:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:26 Set A/D data flow result=40 04:21:26 Set A/D channel type result=40 04:21:26 Set A/D encoding result=40 04:21:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:26 Set channel filter=0.000000e+000 result=40 04:21:26 Config A/D Result=40 04:21:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:26 Get A/D filter: -9.255963e+061 result=40 04:21:26 Get A/D value=-858993460 result=40 04:21:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:26 Parameters OK 04:21:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:26 Set A/D data flow result=40 04:21:26 Set A/D channel type result=40 04:21:26 Set A/D encoding result=40 04:21:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:26 Set channel filter=0.000000e+000 result=40 04:21:26 Config A/D Result=40 04:21:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:26 Get A/D filter: -9.255963e+061 result=40 04:21:26 Get A/D value=-858993460 result=40 04:21:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:21:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:21:26 Aux= 04:21:26 Message to Camera, serial 111721 queued 04:21:35 Received message from Master: op=Shutter serial=111731 04:21:35 Shutter LASER close 04:21:35 Received message from Master: op=PointingHead serial=111735 04:21:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:21:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:21:36 Point started: ret=0 04:21:36 point_skyscan result=0 04:21:36 Check angles 04:21:36 SkyScan query 04:21:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 04:21:37 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 04:21:37 Check angles 04:21:37 SkyScan query 04:21:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 04:21:38 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 04:21:38 Check angles 04:21:38 SkyScan query 04:21:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 04:21:38 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 04:21:39 Check angles 04:21:39 SkyScan query 04:21:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 04:21:39 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 04:21:39 Check angles 04:21:39 SkyScan query 04:21:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.04<-15936 Statuses=0008 0009 04:21:40 Msec=3000 True Az=112.995 Ze=-59.04 Az status=0008 Ze status=0009 04:21:40 Check angles 04:21:40 SkyScan query 04:21:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.04<-14536 Statuses=0008 0009 04:21:41 Msec=3750 True Az=112.995 Ze=-38.04 Az status=0008 Ze status=0009 04:21:41 Check angles 04:21:41 SkyScan query 04:21:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.1<-13140 Statuses=0008 0009 04:21:41 Msec=4500 True Az=112.995 Ze=-17.1 Az status=0008 Ze status=0009 04:21:42 Check angles 04:21:42 SkyScan query 04:21:42 SkyScan query done: ret=0 az=112.995<-7533 ze=3.855<-11743 Statuses=0008 0009 04:21:42 Msec=5250 True Az=112.995 Ze=3.855 Az status=0008 Ze status=0009 04:21:42 Check angles 04:21:42 SkyScan query 04:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:21:43 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:21:43 Message to Master queued w/err=0: serial=111735 error=0 04:21:48 Received message from Master: op=Filter serial=111736 04:21:48 Color wheel filter change from 0 to 0 04:21:48 FLIGetFilterPos err=0 currentPosition=0 04:21:48 FLIGetStepsRemaining err=0 RemainingSteps=0 04:21:48 Filter is already there-color wheel unchanged 04:21:48 Received message from Master: op=Shutter serial=111737 04:21:48 Shutter LASER close 04:21:48 Received message from Camera: op=State serial=111739 04:21:48 GetSingleValue result=40 Value=cccccccc 04:21:48 SkyScan query 04:21:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:21:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:49 Parameters OK 04:21:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:49 Set A/D data flow result=40 04:21:49 Set A/D channel type result=40 04:21:49 Set A/D encoding result=40 04:21:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:49 Set channel filter=0.000000e+000 result=40 04:21:49 Config A/D Result=40 04:21:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:49 Get A/D filter: -9.255963e+061 result=40 04:21:49 Get A/D value=-858993460 result=40 04:21:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:49 Parameters OK 04:21:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:49 Set A/D data flow result=40 04:21:49 Set A/D channel type result=40 04:21:49 Set A/D encoding result=40 04:21:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:49 Set channel filter=0.000000e+000 result=40 04:21:49 Config A/D Result=40 04:21:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:49 Get A/D filter: -9.255963e+061 result=40 04:21:49 Get A/D value=-858993460 result=40 04:21:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:21:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:21:49 Aux= 04:21:49 Message to Camera, serial 111739 queued 04:22:26 Received message from Master: op=PointingHead serial=111752 04:22:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:22:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:22:26 Point started: ret=0 04:22:26 point_skyscan result=0 04:22:27 Check angles 04:22:27 SkyScan query 04:22:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:22:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:22:27 Message to Master queued w/err=0: serial=111752 error=0 04:22:32 Received message from Master: op=Filter serial=111753 04:22:32 Color wheel filter change from 0 to 0 04:22:32 FLIGetFilterPos err=0 currentPosition=0 04:22:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:22:32 Filter is already there-color wheel unchanged 04:22:32 Received message from Master: op=Shutter serial=111754 04:22:32 Shutter LASER close 04:22:33 Received message from Camera: op=State serial=111756 04:22:33 GetSingleValue result=40 Value=cccccccc 04:22:33 SkyScan query 04:22:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:22:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:33 Parameters OK 04:22:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:33 Set A/D data flow result=40 04:22:33 Set A/D channel type result=40 04:22:33 Set A/D encoding result=40 04:22:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:33 Set channel filter=0.000000e+000 result=40 04:22:33 Config A/D Result=40 04:22:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:33 Get A/D filter: -9.255963e+061 result=40 04:22:33 Get A/D value=-858993460 result=40 04:22:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:33 Parameters OK 04:22:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:33 Set A/D data flow result=40 04:22:33 Set A/D channel type result=40 04:22:33 Set A/D encoding result=40 04:22:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:33 Set channel filter=0.000000e+000 result=40 04:22:33 Config A/D Result=40 04:22:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:33 Get A/D filter: -9.255963e+061 result=40 04:22:33 Get A/D value=-858993460 result=40 04:22:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:22:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:22:33 Aux= 04:22:33 Message to Camera, serial 111756 queued 04:23:10 Received message from Master: op=PointingHead serial=111769 04:23:10 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:23:10 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:23:10 Point started: ret=0 04:23:10 point_skyscan result=0 04:23:11 Check angles 04:23:11 SkyScan query 04:23:12 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 04:23:12 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 04:23:12 Check angles 04:23:12 SkyScan query 04:23:12 SkyScan query done: ret=0 az=153.555<-10237 ze=-6.495<-12433 Statuses=0009 0008 04:23:12 Msec=750 True Az=153.555 Ze=-6.495 Az status=0009 Ze status=0008 04:23:13 Check angles 04:23:13 SkyScan query 04:23:13 SkyScan query done: ret=0 az=171.135<-11409 ze=-6.495<-12433 Statuses=0009 0008 04:23:13 Msec=1500 True Az=171.135 Ze=-6.495 Az status=0009 Ze status=0008 04:23:13 Check angles 04:23:13 SkyScan query 04:23:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:23:14 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:23:14 Message to Master queued w/err=0: serial=111769 error=0 04:23:19 Received message from Master: op=Filter serial=111770 04:23:19 Color wheel filter change from 0 to 0 04:23:19 FLIGetFilterPos err=0 currentPosition=0 04:23:19 FLIGetStepsRemaining err=0 RemainingSteps=0 04:23:19 Filter is already there-color wheel unchanged 04:23:19 Received message from Master: op=Shutter serial=111771 04:23:19 Shutter LASER close 04:23:19 Received message from Camera: op=State serial=111773 04:23:19 GetSingleValue result=40 Value=cccccccc 04:23:19 SkyScan query 04:23:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:23:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:20 Parameters OK 04:23:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:20 Set A/D data flow result=40 04:23:20 Set A/D channel type result=40 04:23:20 Set A/D encoding result=40 04:23:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:20 Set channel filter=0.000000e+000 result=40 04:23:20 Config A/D Result=40 04:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:20 Get A/D filter: -9.255963e+061 result=40 04:23:20 Get A/D value=-858993460 result=40 04:23:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:20 Parameters OK 04:23:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:20 Set A/D data flow result=40 04:23:20 Set A/D channel type result=40 04:23:20 Set A/D encoding result=40 04:23:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:20 Set channel filter=0.000000e+000 result=40 04:23:20 Config A/D Result=40 04:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:20 Get A/D filter: -9.255963e+061 result=40 04:23:20 Get A/D value=-858993460 result=40 04:23:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:23:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:23:20 Aux= 04:23:20 Message to Camera, serial 111773 queued [UTC 2019-3-5 04:23:50] 04:23:56 Received message from Master: op=PointingHead serial=111786 04:23:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:23:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:23:57 Point started: ret=0 04:23:57 point_skyscan result=0 04:23:58 Check angles 04:23:58 SkyScan query 04:23:58 SkyScan query done: ret=0 az=153.075<-10205 ze=6.51<-11566 Statuses=0009 0008 04:23:58 Msec=0 True Az=153.075 Ze=6.51 Az status=0009 Ze status=0008 04:23:58 Check angles 04:23:58 SkyScan query 04:23:59 SkyScan query done: ret=0 az=135.585<-9039 ze=6.495<-11567 Statuses=0009 0008 04:23:59 Msec=750 True Az=135.585 Ze=6.495 Az status=0009 Ze status=0008 04:23:59 Check angles 04:23:59 SkyScan query 04:24:00 SkyScan query done: ret=0 az=118.08<-7872 ze=6.495<-11567 Statuses=0009 0008 04:24:00 Msec=1500 True Az=118.08 Ze=6.495 Az status=0009 Ze status=0008 04:24:00 Check angles 04:24:00 SkyScan query 04:24:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:24:00 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:24:00 Message to Master queued w/err=0: serial=111786 error=0 04:24:05 Received message from Master: op=Filter serial=111787 04:24:05 Color wheel filter change from 0 to 0 04:24:05 FLIGetFilterPos err=0 currentPosition=0 04:24:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:24:05 Filter is already there-color wheel unchanged 04:24:06 Received message from Master: op=Shutter serial=111788 04:24:06 Shutter LASER close 04:24:06 Received message from Camera: op=State serial=111790 04:24:06 GetSingleValue result=40 Value=cccccccc 04:24:06 SkyScan query 04:24:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:24:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:06 Parameters OK 04:24:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:06 Set A/D data flow result=40 04:24:06 Set A/D channel type result=40 04:24:06 Set A/D encoding result=40 04:24:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:06 Set channel filter=0.000000e+000 result=40 04:24:06 Config A/D Result=40 04:24:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:06 Get A/D filter: -9.255963e+061 result=40 04:24:06 Get A/D value=-858993460 result=40 04:24:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:06 Parameters OK 04:24:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:06 Set A/D data flow result=40 04:24:06 Set A/D channel type result=40 04:24:06 Set A/D encoding result=40 04:24:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:06 Set channel filter=0.000000e+000 result=40 04:24:06 Config A/D Result=40 04:24:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:06 Get A/D filter: -9.255963e+061 result=40 04:24:06 Get A/D value=-858993460 result=40 04:24:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:24:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:24:06 Aux= 04:24:06 Message to Camera, serial 111790 queued 04:24:43 Received message from Master: op=PointingHead serial=111803 04:24:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:24:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:24:43 Point started: ret=0 04:24:43 point_skyscan result=0 04:24:44 Check angles 04:24:44 SkyScan query 04:24:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.43<-13562 Statuses=0008 0009 04:24:45 Msec=0 True Az=112.995 Ze=-23.43 Az status=0008 Ze status=0009 04:24:45 Check angles 04:24:45 SkyScan query 04:24:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 04:24:45 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 04:24:46 Check angles 04:24:46 SkyScan query 04:24:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.355<-16357 Statuses=0008 0009 04:24:46 Msec=1500 True Az=112.995 Ze=-65.355 Az status=0008 Ze status=0009 04:24:46 Check angles 04:24:46 SkyScan query 04:24:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.31<-17754 Statuses=0008 0009 04:24:47 Msec=2250 True Az=112.995 Ze=-86.31 Az status=0008 Ze status=0009 04:24:47 Check angles 04:24:47 SkyScan query 04:24:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.25<-19150 Statuses=0008 0009 04:24:48 Msec=3000 True Az=112.995 Ze=-107.25 Az status=0008 Ze status=0009 04:24:48 Check angles 04:24:48 SkyScan query 04:24:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.205<-20547 Statuses=0008 0009 04:24:48 Msec=3750 True Az=112.995 Ze=-128.205 Az status=0008 Ze status=0009 04:24:49 Check angles 04:24:49 SkyScan query 04:24:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.16<-21944 Statuses=0008 0009 04:24:49 Msec=4500 True Az=112.995 Ze=-149.16 Az status=0008 Ze status=0009 04:24:49 Check angles 04:24:49 SkyScan query 04:24:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.1<-23340 Statuses=0008 0009 04:24:50 Msec=5250 True Az=112.995 Ze=-170.1 Az status=0008 Ze status=0009 04:24:50 Check angles 04:24:50 SkyScan query 04:24:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:24:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:24:51 Message to Master queued w/err=0: serial=111803 error=0 04:24:56 Received message from Master: op=Filter serial=111804 04:24:56 Color wheel filter change from 0 to 0 04:24:56 FLIGetFilterPos err=0 currentPosition=0 04:24:56 FLIGetStepsRemaining err=0 RemainingSteps=0 04:24:56 Filter is already there-color wheel unchanged 04:24:56 Received message from Master: op=Shutter serial=111805 04:24:56 Shutter LASER open 04:24:56 Received message from Camera: op=State serial=111807 04:24:56 GetSingleValue result=40 Value=cccccccc 04:24:56 SkyScan query 04:24:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:24:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:57 Parameters OK 04:24:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:57 Set A/D data flow result=40 04:24:57 Set A/D channel type result=40 04:24:57 Set A/D encoding result=40 04:24:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:57 Set channel filter=0.000000e+000 result=40 04:24:57 Config A/D Result=40 04:24:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:57 Get A/D filter: -9.255963e+061 result=40 04:24:57 Get A/D value=-858993460 result=40 04:24:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:57 Parameters OK 04:24:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:57 Set A/D data flow result=40 04:24:57 Set A/D channel type result=40 04:24:57 Set A/D encoding result=40 04:24:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:57 Set channel filter=0.000000e+000 result=40 04:24:57 Config A/D Result=40 04:24:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:57 Get A/D filter: -9.255963e+061 result=40 04:24:57 Get A/D value=-858993460 result=40 04:24:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:24:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:24:57 Aux= 04:24:57 Message to Camera, serial 111807 queued 04:25:05 Received message from Master: op=Shutter serial=111817 04:25:05 Shutter LASER close 04:25:05 Received message from Master: op=PointingHead serial=111821 04:25:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:25:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:25:06 Point started: ret=0 04:25:06 point_skyscan result=0 04:25:07 Check angles 04:25:07 SkyScan query 04:25:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 04:25:07 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 04:25:07 Check angles 04:25:07 SkyScan query 04:25:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.505<-20167 Statuses=0008 0009 04:25:08 Msec=750 True Az=112.995 Ze=-122.505 Az status=0008 Ze status=0009 04:25:08 Check angles 04:25:08 SkyScan query 04:25:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 04:25:09 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 04:25:09 Check angles 04:25:09 SkyScan query 04:25:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 04:25:09 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 04:25:10 Check angles 04:25:10 SkyScan query 04:25:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 04:25:10 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 04:25:10 Check angles 04:25:10 SkyScan query 04:25:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.8<-14520 Statuses=0008 0009 04:25:11 Msec=3750 True Az=112.995 Ze=-37.8 Az status=0008 Ze status=0009 04:25:11 Check angles 04:25:11 SkyScan query 04:25:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.845<-13123 Statuses=0008 0009 04:25:12 Msec=4500 True Az=112.995 Ze=-16.845 Az status=0008 Ze status=0009 04:25:12 Check angles 04:25:12 SkyScan query 04:25:12 SkyScan query done: ret=0 az=112.995<-7533 ze=4.11<-11726 Statuses=0008 0009 04:25:12 Msec=5250 True Az=112.995 Ze=4.11 Az status=0008 Ze status=0009 04:25:13 Check angles 04:25:13 SkyScan query 04:25:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:25:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:25:13 Message to Master queued w/err=0: serial=111821 error=0 04:25:18 Received message from Master: op=Filter serial=111822 04:25:18 Color wheel filter change from 0 to 0 04:25:18 FLIGetFilterPos err=0 currentPosition=0 04:25:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:25:18 Filter is already there-color wheel unchanged 04:25:18 Received message from Master: op=Shutter serial=111823 04:25:18 Shutter LASER close 04:25:19 Received message from Camera: op=State serial=111825 04:25:19 GetSingleValue result=40 Value=cccccccc 04:25:19 SkyScan query 04:25:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:25:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:19 Parameters OK 04:25:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:19 Set A/D data flow result=40 04:25:19 Set A/D channel type result=40 04:25:19 Set A/D encoding result=40 04:25:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:19 Set channel filter=0.000000e+000 result=40 04:25:19 Config A/D Result=40 04:25:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:19 Get A/D filter: -9.255963e+061 result=40 04:25:19 Get A/D value=-858993460 result=40 04:25:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:19 Parameters OK 04:25:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:19 Set A/D data flow result=40 04:25:19 Set A/D channel type result=40 04:25:19 Set A/D encoding result=40 04:25:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:19 Set channel filter=0.000000e+000 result=40 04:25:19 Config A/D Result=40 04:25:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:19 Get A/D filter: -9.255963e+061 result=40 04:25:19 Get A/D value=-858993460 result=40 04:25:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:25:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:25:19 Aux= 04:25:19 Message to Camera, serial 111825 queued 04:25:56 Received message from Master: op=PointingHead serial=111838 04:25:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:25:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:25:56 Point started: ret=0 04:25:56 point_skyscan result=0 04:25:57 Check angles 04:25:57 SkyScan query 04:25:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:25:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:25:58 Message to Master queued w/err=0: serial=111838 error=0 04:26:03 Received message from Master: op=Filter serial=111839 04:26:03 Color wheel filter change from 0 to 0 04:26:03 FLIGetFilterPos err=0 currentPosition=0 04:26:03 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:03 Filter is already there-color wheel unchanged 04:26:03 Received message from Master: op=Shutter serial=111840 04:26:03 Shutter LASER close 04:26:03 Received message from Camera: op=State serial=111842 04:26:03 GetSingleValue result=40 Value=cccccccc 04:26:03 SkyScan query 04:26:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:26:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:04 Parameters OK 04:26:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:04 Set A/D data flow result=40 04:26:04 Set A/D channel type result=40 04:26:04 Set A/D encoding result=40 04:26:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:04 Set channel filter=0.000000e+000 result=40 04:26:04 Config A/D Result=40 04:26:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:04 Get A/D filter: -9.255963e+061 result=40 04:26:04 Get A/D value=-858993460 result=40 04:26:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:04 Parameters OK 04:26:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:04 Set A/D data flow result=40 04:26:04 Set A/D channel type result=40 04:26:04 Set A/D encoding result=40 04:26:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:04 Set channel filter=0.000000e+000 result=40 04:26:04 Config A/D Result=40 04:26:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:04 Get A/D filter: -9.255963e+061 result=40 04:26:04 Get A/D value=-858993460 result=40 04:26:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:04 Aux= 04:26:04 Message to Camera, serial 111842 queued 04:26:40 Received message from Master: op=PointingHead serial=111855 04:26:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:26:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:26:41 Point started: ret=0 04:26:41 point_skyscan result=0 04:26:41 Check angles 04:26:41 SkyScan query 04:26:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:26:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:26:42 Message to Master queued w/err=0: serial=111855 error=0 04:26:47 Received message from Master: op=Filter serial=111856 04:26:47 Color wheel filter change from 0 to 0 04:26:47 FLIGetFilterPos err=0 currentPosition=0 04:26:47 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:47 Filter is already there-color wheel unchanged 04:26:47 Received message from Master: op=Shutter serial=111857 04:26:47 Shutter LASER close 04:26:47 Received message from Camera: op=State serial=111859 04:26:47 GetSingleValue result=40 Value=cccccccc 04:26:47 SkyScan query 04:26:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:26:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:48 Parameters OK 04:26:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:48 Set A/D data flow result=40 04:26:48 Set A/D channel type result=40 04:26:48 Set A/D encoding result=40 04:26:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:48 Set channel filter=0.000000e+000 result=40 04:26:48 Config A/D Result=40 04:26:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:48 Get A/D filter: -9.255963e+061 result=40 04:26:48 Get A/D value=-858993460 result=40 04:26:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:48 Parameters OK 04:26:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:48 Set A/D data flow result=40 04:26:48 Set A/D channel type result=40 04:26:48 Set A/D encoding result=40 04:26:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:48 Set channel filter=0.000000e+000 result=40 04:26:48 Config A/D Result=40 04:26:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:48 Get A/D filter: -9.255963e+061 result=40 04:26:48 Get A/D value=-858993460 result=40 04:26:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:48 Aux= 04:26:48 Message to Camera, serial 111859 queued 04:27:25 Received message from Master: op=PointingHead serial=111872 04:27:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:27:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:27:25 Point started: ret=0 04:27:25 point_skyscan result=0 04:27:26 Check angles 04:27:26 SkyScan query 04:27:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:27:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:27:26 Message to Master queued w/err=0: serial=111872 error=0 04:27:31 Received message from Master: op=Filter serial=111873 04:27:31 Color wheel filter change from 0 to 0 04:27:31 FLIGetFilterPos err=0 currentPosition=0 04:27:31 FLIGetStepsRemaining err=0 RemainingSteps=0 04:27:31 Filter is already there-color wheel unchanged 04:27:32 Received message from Master: op=Shutter serial=111874 04:27:32 Shutter LASER close 04:27:32 Received message from Camera: op=State serial=111876 04:27:32 GetSingleValue result=40 Value=cccccccc 04:27:32 SkyScan query 04:27:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:27:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:32 Parameters OK 04:27:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:32 Set A/D data flow result=40 04:27:32 Set A/D channel type result=40 04:27:32 Set A/D encoding result=40 04:27:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:32 Set channel filter=0.000000e+000 result=40 04:27:32 Config A/D Result=40 04:27:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:32 Get A/D filter: -9.255963e+061 result=40 04:27:32 Get A/D value=-858993460 result=40 04:27:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:32 Parameters OK 04:27:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:32 Set A/D data flow result=40 04:27:32 Set A/D channel type result=40 04:27:32 Set A/D encoding result=40 04:27:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:32 Set channel filter=0.000000e+000 result=40 04:27:32 Config A/D Result=40 04:27:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:32 Get A/D filter: -9.255963e+061 result=40 04:27:32 Get A/D value=-858993460 result=40 04:27:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:27:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:27:32 Aux= 04:27:32 Message to Camera, serial 111876 queued 04:28:09 Received message from Master: op=PointingHead serial=111889 04:28:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:28:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:28:09 Point started: ret=0 04:28:09 point_skyscan result=0 04:28:10 Check angles 04:28:10 SkyScan query 04:28:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.19<-13546 Statuses=0008 0009 04:28:11 Msec=0 True Az=112.995 Ze=-23.19 Az status=0008 Ze status=0009 04:28:11 Check angles 04:28:11 SkyScan query 04:28:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.7<-14980 Statuses=0008 0009 04:28:11 Msec=750 True Az=112.995 Ze=-44.7 Az status=0008 Ze status=0009 04:28:12 Check angles 04:28:12 SkyScan query 04:28:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 04:28:12 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 04:28:12 Check angles 04:28:12 SkyScan query 04:28:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.505<-17767 Statuses=0008 0009 04:28:13 Msec=2250 True Az=112.995 Ze=-86.505 Az status=0008 Ze status=0009 04:28:13 Check angles 04:28:13 SkyScan query 04:28:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.46<-19164 Statuses=0008 0009 04:28:14 Msec=3000 True Az=112.995 Ze=-107.46 Az status=0008 Ze status=0009 04:28:14 Check angles 04:28:14 SkyScan query 04:28:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.385<-20559 Statuses=0008 0009 04:28:14 Msec=3750 True Az=112.995 Ze=-128.385 Az status=0008 Ze status=0009 04:28:15 Check angles 04:28:15 SkyScan query 04:28:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.37<-21958 Statuses=0008 0009 04:28:15 Msec=4500 True Az=112.995 Ze=-149.37 Az status=0008 Ze status=0009 04:28:15 Check angles 04:28:15 SkyScan query 04:28:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.295<-23353 Statuses=0008 0009 04:28:16 Msec=5250 True Az=112.995 Ze=-170.295 Az status=0008 Ze status=0009 04:28:16 Check angles 04:28:16 SkyScan query 04:28:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:28:17 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:28:17 Message to Master queued w/err=0: serial=111889 error=0 04:28:22 Received message from Master: op=Filter serial=111890 04:28:22 Color wheel filter change from 0 to 0 04:28:22 FLIGetFilterPos err=0 currentPosition=0 04:28:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:28:22 Filter is already there-color wheel unchanged 04:28:22 Received message from Master: op=Shutter serial=111891 04:28:22 Shutter LASER open 04:28:22 Received message from Camera: op=State serial=111893 04:28:22 GetSingleValue result=40 Value=cccccccc 04:28:22 SkyScan query 04:28:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:28:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:23 Parameters OK 04:28:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:23 Set A/D data flow result=40 04:28:23 Set A/D channel type result=40 04:28:23 Set A/D encoding result=40 04:28:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:23 Set channel filter=0.000000e+000 result=40 04:28:23 Config A/D Result=40 04:28:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:23 Get A/D filter: -9.255963e+061 result=40 04:28:23 Get A/D value=-858993460 result=40 04:28:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:23 Parameters OK 04:28:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:23 Set A/D data flow result=40 04:28:23 Set A/D channel type result=40 04:28:23 Set A/D encoding result=40 04:28:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:23 Set channel filter=0.000000e+000 result=40 04:28:23 Config A/D Result=40 04:28:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:23 Get A/D filter: -9.255963e+061 result=40 04:28:23 Get A/D value=-858993460 result=40 04:28:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:28:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:28:23 Aux= 04:28:23 Message to Camera, serial 111893 queued 04:28:31 Received message from Master: op=Shutter serial=111903 04:28:31 Shutter LASER close 04:28:32 Received message from Master: op=PointingHead serial=111907 04:28:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:28:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:28:32 Point started: ret=0 04:28:32 point_skyscan result=0 04:28:33 Check angles 04:28:33 SkyScan query 04:28:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 04:28:33 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 04:28:33 Check angles 04:28:33 SkyScan query 04:28:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.98<-20132 Statuses=0008 0009 04:28:34 Msec=750 True Az=112.995 Ze=-121.98 Az status=0008 Ze status=0009 04:28:34 Check angles 04:28:34 SkyScan query 04:28:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.055<-18737 Statuses=0008 0009 04:28:35 Msec=1500 True Az=112.995 Ze=-101.055 Az status=0008 Ze status=0009 04:28:35 Check angles 04:28:35 SkyScan query 04:28:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.115<-17341 Statuses=0008 0009 04:28:36 Msec=2250 True Az=112.995 Ze=-80.115 Az status=0008 Ze status=0009 04:28:36 Check angles 04:28:36 SkyScan query 04:28:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.13<-15942 Statuses=0008 0009 04:28:36 Msec=3000 True Az=112.995 Ze=-59.13 Az status=0008 Ze status=0009 04:28:36 Check angles 04:28:36 SkyScan query 04:28:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.16<-14544 Statuses=0008 0009 04:28:37 Msec=3750 True Az=112.995 Ze=-38.16 Az status=0008 Ze status=0009 04:28:37 Check angles 04:28:37 SkyScan query 04:28:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.22<-13148 Statuses=0008 0009 04:28:38 Msec=4500 True Az=112.995 Ze=-17.22 Az status=0008 Ze status=0009 04:28:38 Check angles 04:28:38 SkyScan query 04:28:39 SkyScan query done: ret=0 az=112.995<-7533 ze=3.735<-11751 Statuses=0008 0009 04:28:39 Msec=5250 True Az=112.995 Ze=3.735 Az status=0008 Ze status=0009 04:28:39 Check angles 04:28:39 SkyScan query 04:28:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:28:39 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:28:39 Message to Master queued w/err=0: serial=111907 error=0 04:28:44 Received message from Master: op=Filter serial=111908 04:28:44 Color wheel filter change from 0 to 0 04:28:44 FLIGetFilterPos err=0 currentPosition=0 04:28:44 FLIGetStepsRemaining err=0 RemainingSteps=0 04:28:44 Filter is already there-color wheel unchanged 04:28:44 Received message from Master: op=Shutter serial=111909 04:28:44 Shutter LASER close 04:28:45 Received message from Camera: op=State serial=111911 04:28:45 GetSingleValue result=40 Value=cccccccc 04:28:45 SkyScan query 04:28:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:28:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:45 Parameters OK 04:28:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:45 Set A/D data flow result=40 04:28:45 Set A/D channel type result=40 04:28:45 Set A/D encoding result=40 04:28:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:45 Set channel filter=0.000000e+000 result=40 04:28:45 Config A/D Result=40 04:28:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:45 Get A/D filter: -9.255963e+061 result=40 04:28:45 Get A/D value=-858993460 result=40 04:28:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:45 Parameters OK 04:28:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:45 Set A/D data flow result=40 04:28:45 Set A/D channel type result=40 04:28:45 Set A/D encoding result=40 04:28:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:45 Set channel filter=0.000000e+000 result=40 04:28:45 Config A/D Result=40 04:28:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:45 Get A/D filter: -9.255963e+061 result=40 04:28:45 Get A/D value=-858993460 result=40 04:28:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:28:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:28:45 Aux= 04:28:45 Message to Camera, serial 111911 queued 04:29:22 Received message from Master: op=PointingHead serial=111924 04:29:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:29:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:29:22 Point started: ret=0 04:29:22 point_skyscan result=0 04:29:23 Check angles 04:29:23 SkyScan query 04:29:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:29:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:29:24 Message to Master queued w/err=0: serial=111924 error=0 04:29:29 Received message from Master: op=Filter serial=111925 04:29:29 Color wheel filter change from 0 to 0 04:29:29 FLIGetFilterPos err=0 currentPosition=0 04:29:29 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:29 Filter is already there-color wheel unchanged 04:29:29 Received message from Master: op=Shutter serial=111926 04:29:29 Shutter LASER close 04:29:29 Received message from Camera: op=State serial=111928 04:29:29 GetSingleValue result=40 Value=cccccccc 04:29:29 SkyScan query 04:29:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:29:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:30 Parameters OK 04:29:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:30 Set A/D data flow result=40 04:29:30 Set A/D channel type result=40 04:29:30 Set A/D encoding result=40 04:29:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:30 Set channel filter=0.000000e+000 result=40 04:29:30 Config A/D Result=40 04:29:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:30 Get A/D filter: -9.255963e+061 result=40 04:29:30 Get A/D value=-858993460 result=40 04:29:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:30 Parameters OK 04:29:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:30 Set A/D data flow result=40 04:29:30 Set A/D channel type result=40 04:29:30 Set A/D encoding result=40 04:29:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:30 Set channel filter=0.000000e+000 result=40 04:29:30 Config A/D Result=40 04:29:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:30 Get A/D filter: -9.255963e+061 result=40 04:29:30 Get A/D value=-858993460 result=40 04:29:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:29:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:29:30 Aux= 04:29:30 Message to Camera, serial 111928 queued 04:30:06 Received message from Master: op=PointingHead serial=111941 04:30:06 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:30:06 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:30:07 Point started: ret=0 04:30:07 point_skyscan result=0 04:30:07 Check angles 04:30:07 SkyScan query 04:30:08 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 04:30:08 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 04:30:08 Check angles 04:30:08 SkyScan query 04:30:09 SkyScan query done: ret=0 az=153.81<-10254 ze=-6.495<-12433 Statuses=0009 0008 04:30:09 Msec=750 True Az=153.81 Ze=-6.495 Az status=0009 Ze status=0008 04:30:09 Check angles 04:30:09 SkyScan query 04:30:10 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 04:30:10 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 04:30:10 Check angles 04:30:10 SkyScan query 04:30:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:30:10 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:30:10 Message to Master queued w/err=0: serial=111941 error=0 04:30:15 Received message from Master: op=Filter serial=111942 04:30:15 Color wheel filter change from 0 to 0 04:30:15 FLIGetFilterPos err=0 currentPosition=0 04:30:15 FLIGetStepsRemaining err=0 RemainingSteps=0 04:30:15 Filter is already there-color wheel unchanged 04:30:15 Received message from Master: op=Shutter serial=111943 04:30:15 Shutter LASER close 04:30:16 Received message from Camera: op=State serial=111945 04:30:16 GetSingleValue result=40 Value=cccccccc 04:30:16 SkyScan query 04:30:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:30:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:16 Parameters OK 04:30:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:16 Set A/D data flow result=40 04:30:16 Set A/D channel type result=40 04:30:16 Set A/D encoding result=40 04:30:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:16 Set channel filter=0.000000e+000 result=40 04:30:16 Config A/D Result=40 04:30:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:16 Get A/D filter: -9.255963e+061 result=40 04:30:16 Get A/D value=-858993460 result=40 04:30:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:16 Parameters OK 04:30:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:16 Set A/D data flow result=40 04:30:16 Set A/D channel type result=40 04:30:16 Set A/D encoding result=40 04:30:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:16 Set channel filter=0.000000e+000 result=40 04:30:16 Config A/D Result=40 04:30:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:16 Get A/D filter: -9.255963e+061 result=40 04:30:16 Get A/D value=-858993460 result=40 04:30:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:30:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:30:16 Aux= 04:30:16 Message to Camera, serial 111945 queued 04:30:53 Received message from Master: op=PointingHead serial=111958 04:30:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:30:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:30:53 Point started: ret=0 04:30:53 point_skyscan result=0 04:30:54 Check angles 04:30:54 SkyScan query 04:30:55 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 04:30:55 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 04:30:55 Check angles 04:30:55 SkyScan query 04:30:55 SkyScan query done: ret=0 az=135.435<-9029 ze=6.495<-11567 Statuses=0009 0008 04:30:55 Msec=750 True Az=135.435 Ze=6.495 Az status=0009 Ze status=0008 04:30:56 Check angles 04:30:56 SkyScan query 04:30:56 SkyScan query done: ret=0 az=118.08<-7872 ze=6.495<-11567 Statuses=0009 0008 04:30:56 Msec=1500 True Az=118.08 Ze=6.495 Az status=0009 Ze status=0008 04:30:56 Check angles 04:30:56 SkyScan query 04:30:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:30:57 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:30:57 Message to Master queued w/err=0: serial=111958 error=0 04:31:02 Received message from Master: op=Filter serial=111959 04:31:02 Color wheel filter change from 0 to 0 04:31:02 FLIGetFilterPos err=0 currentPosition=0 04:31:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:02 Filter is already there-color wheel unchanged 04:31:02 Received message from Master: op=Shutter serial=111960 04:31:02 Shutter LASER close 04:31:02 Received message from Camera: op=State serial=111962 04:31:02 GetSingleValue result=40 Value=cccccccc 04:31:02 SkyScan query 04:31:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:31:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:03 Parameters OK 04:31:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:03 Set A/D data flow result=40 04:31:03 Set A/D channel type result=40 04:31:03 Set A/D encoding result=40 04:31:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:03 Set channel filter=0.000000e+000 result=40 04:31:03 Config A/D Result=40 04:31:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:03 Get A/D filter: -9.255963e+061 result=40 04:31:03 Get A/D value=-858993460 result=40 04:31:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:03 Parameters OK 04:31:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:03 Set A/D data flow result=40 04:31:03 Set A/D channel type result=40 04:31:03 Set A/D encoding result=40 04:31:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:03 Set channel filter=0.000000e+000 result=40 04:31:03 Config A/D Result=40 04:31:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:03 Get A/D filter: -9.255963e+061 result=40 04:31:03 Get A/D value=-858993460 result=40 04:31:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:03 Aux= 04:31:03 Message to Camera, serial 111962 queued 04:31:40 Received message from Master: op=PointingHead serial=111975 04:31:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:31:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:31:40 Point started: ret=0 04:31:40 point_skyscan result=0 04:31:41 Check angles 04:31:41 SkyScan query 04:31:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.22<-13548 Statuses=0008 0009 04:31:41 Msec=0 True Az=112.995 Ze=-23.22 Az status=0008 Ze status=0009 04:31:41 Check angles 04:31:41 SkyScan query 04:31:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.205<-14947 Statuses=0008 0009 04:31:42 Msec=750 True Az=112.995 Ze=-44.205 Az status=0008 Ze status=0009 04:31:42 Check angles 04:31:42 SkyScan query 04:31:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.16<-16344 Statuses=0008 0009 04:31:43 Msec=1500 True Az=112.995 Ze=-65.16 Az status=0008 Ze status=0009 04:31:43 Check angles 04:31:43 SkyScan query 04:31:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.13<-17742 Statuses=0008 0009 04:31:43 Msec=2250 True Az=112.995 Ze=-86.13 Az status=0008 Ze status=0009 04:31:44 Check angles 04:31:44 SkyScan query 04:31:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.04<-19136 Statuses=0008 0009 04:31:44 Msec=3000 True Az=112.995 Ze=-107.04 Az status=0008 Ze status=0009 04:31:44 Check angles 04:31:44 SkyScan query 04:31:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.01<-20534 Statuses=0008 0009 04:31:45 Msec=3750 True Az=112.995 Ze=-128.01 Az status=0008 Ze status=0009 04:31:45 Check angles 04:31:45 SkyScan query 04:31:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.965<-21931 Statuses=0008 0009 04:31:46 Msec=4500 True Az=112.995 Ze=-148.965 Az status=0008 Ze status=0009 04:31:46 Check angles 04:31:46 SkyScan query 04:31:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.905<-23327 Statuses=0008 0009 04:31:46 Msec=5250 True Az=112.995 Ze=-169.905 Az status=0008 Ze status=0009 04:31:47 Check angles 04:31:47 SkyScan query 04:31:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:31:47 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:31:47 Message to Master queued w/err=0: serial=111975 error=0 04:31:52 Received message from Master: op=Filter serial=111976 04:31:52 Color wheel filter change from 0 to 0 04:31:52 FLIGetFilterPos err=0 currentPosition=0 04:31:52 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:52 Filter is already there-color wheel unchanged 04:31:52 Received message from Master: op=Shutter serial=111977 04:31:52 Shutter LASER open 04:31:53 Received message from Camera: op=State serial=111979 04:31:53 GetSingleValue result=40 Value=cccccccc 04:31:53 SkyScan query 04:31:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:31:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:53 Parameters OK 04:31:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:53 Set A/D data flow result=40 04:31:53 Set A/D channel type result=40 04:31:53 Set A/D encoding result=40 04:31:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:53 Set channel filter=0.000000e+000 result=40 04:31:53 Config A/D Result=40 04:31:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:53 Get A/D filter: -9.255963e+061 result=40 04:31:53 Get A/D value=-858993460 result=40 04:31:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:53 Parameters OK 04:31:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:53 Set A/D data flow result=40 04:31:53 Set A/D channel type result=40 04:31:53 Set A/D encoding result=40 04:31:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:53 Set channel filter=0.000000e+000 result=40 04:31:53 Config A/D Result=40 04:31:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:53 Get A/D filter: -9.255963e+061 result=40 04:31:53 Get A/D value=-858993460 result=40 04:31:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:53 Aux= 04:31:53 Message to Camera, serial 111979 queued 04:32:02 Received message from Master: op=Shutter serial=111989 04:32:02 Shutter LASER close 04:32:02 Received message from Master: op=PointingHead serial=111993 04:32:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:32:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:32:02 Point started: ret=0 04:32:02 point_skyscan result=0 04:32:03 Check angles 04:32:03 SkyScan query 04:32:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.92<-21528 Statuses=0008 0009 04:32:04 Msec=0 True Az=112.995 Ze=-142.92 Az status=0008 Ze status=0009 04:32:04 Check angles 04:32:04 SkyScan query 04:32:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.965<-20131 Statuses=0008 0009 04:32:04 Msec=750 True Az=112.995 Ze=-121.965 Az status=0008 Ze status=0009 04:32:05 Check angles 04:32:05 SkyScan query 04:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.59<-18706 Statuses=0008 0009 04:32:05 Msec=1500 True Az=112.995 Ze=-100.59 Az status=0008 Ze status=0009 04:32:05 Check angles 04:32:05 SkyScan query 04:32:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.62<-17308 Statuses=0008 0009 04:32:06 Msec=2250 True Az=112.995 Ze=-79.62 Az status=0008 Ze status=0009 04:32:06 Check angles 04:32:06 SkyScan query 04:32:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.665<-15911 Statuses=0008 0009 04:32:07 Msec=3000 True Az=112.995 Ze=-58.665 Az status=0008 Ze status=0009 04:32:07 Check angles 04:32:07 SkyScan query 04:32:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.71<-14514 Statuses=0008 0009 04:32:07 Msec=3750 True Az=112.995 Ze=-37.71 Az status=0008 Ze status=0009 04:32:08 Check angles 04:32:08 SkyScan query 04:32:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.755<-13117 Statuses=0008 0009 04:32:08 Msec=4500 True Az=112.995 Ze=-16.755 Az status=0008 Ze status=0009 04:32:08 Check angles 04:32:08 SkyScan query 04:32:09 SkyScan query done: ret=0 az=112.995<-7533 ze=4.17<-11722 Statuses=0008 0009 04:32:09 Msec=5250 True Az=112.995 Ze=4.17 Az status=0008 Ze status=0009 04:32:09 Check angles 04:32:09 SkyScan query 04:32:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:32:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:32:10 Message to Master queued w/err=0: serial=111993 error=0 04:32:15 Received message from Master: op=Filter serial=111994 04:32:15 Color wheel filter change from 0 to 0 04:32:15 FLIGetFilterPos err=0 currentPosition=0 04:32:15 FLIGetStepsRemaining err=0 RemainingSteps=0 04:32:15 Filter is already there-color wheel unchanged 04:32:15 Received message from Master: op=Shutter serial=111995 04:32:15 Shutter LASER close 04:32:15 Received message from Camera: op=State serial=111997 04:32:15 GetSingleValue result=40 Value=cccccccc 04:32:15 SkyScan query 04:32:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:32:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:16 Parameters OK 04:32:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:16 Set A/D data flow result=40 04:32:16 Set A/D channel type result=40 04:32:16 Set A/D encoding result=40 04:32:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:16 Set channel filter=0.000000e+000 result=40 04:32:16 Config A/D Result=40 04:32:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:16 Get A/D filter: -9.255963e+061 result=40 04:32:16 Get A/D value=-858993460 result=40 04:32:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:16 Parameters OK 04:32:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:16 Set A/D data flow result=40 04:32:16 Set A/D channel type result=40 04:32:16 Set A/D encoding result=40 04:32:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:16 Set channel filter=0.000000e+000 result=40 04:32:16 Config A/D Result=40 04:32:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:16 Get A/D filter: -9.255963e+061 result=40 04:32:16 Get A/D value=-858993460 result=40 04:32:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:32:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:32:16 Aux= 04:32:16 Message to Camera, serial 111997 queued 04:32:52 Received message from Master: op=PointingHead serial=112010 04:32:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:32:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:32:53 Point started: ret=0 04:32:53 point_skyscan result=0 04:32:54 Check angles 04:32:54 SkyScan query 04:32:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:32:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:32:54 Message to Master queued w/err=0: serial=112010 error=0 04:32:59 Received message from Master: op=Filter serial=112011 04:32:59 Color wheel filter change from 0 to 0 04:32:59 FLIGetFilterPos err=0 currentPosition=0 04:32:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:32:59 Filter is already there-color wheel unchanged 04:32:59 Received message from Master: op=Shutter serial=112012 04:32:59 Shutter LASER close 04:32:59 Received message from Camera: op=State serial=112014 04:32:59 GetSingleValue result=40 Value=cccccccc 04:32:59 SkyScan query 04:33:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:33:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:00 Parameters OK 04:33:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:00 Set A/D data flow result=40 04:33:00 Set A/D channel type result=40 04:33:00 Set A/D encoding result=40 04:33:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:00 Set channel filter=0.000000e+000 result=40 04:33:00 Config A/D Result=40 04:33:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:00 Get A/D filter: -9.255963e+061 result=40 04:33:00 Get A/D value=-858993460 result=40 04:33:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:00 Parameters OK 04:33:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:00 Set A/D data flow result=40 04:33:00 Set A/D channel type result=40 04:33:00 Set A/D encoding result=40 04:33:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:00 Set channel filter=0.000000e+000 result=40 04:33:00 Config A/D Result=40 04:33:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:00 Get A/D filter: -9.255963e+061 result=40 04:33:00 Get A/D value=-858993460 result=40 04:33:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:00 Aux= 04:33:00 Message to Camera, serial 112014 queued 04:33:37 Received message from Master: op=PointingHead serial=112027 04:33:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:33:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:33:37 Point started: ret=0 04:33:37 point_skyscan result=0 04:33:38 Received message from Master: op=Identify serial=112028 04:33:38 Check angles 04:33:38 SkyScan query 04:33:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:33:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:33:38 Message to Master queued w/err=0: serial=112027 error=0 04:33:43 Received message from Master: op=Filter serial=112031 04:33:43 Color wheel filter change from 0 to 0 04:33:43 FLIGetFilterPos err=0 currentPosition=0 04:33:43 FLIGetStepsRemaining err=0 RemainingSteps=0 04:33:43 Filter is already there-color wheel unchanged 04:33:44 Received message from Master: op=Shutter serial=112032 04:33:44 Shutter LASER close 04:33:44 Received message from Camera: op=State serial=112034 04:33:44 GetSingleValue result=40 Value=cccccccc 04:33:44 SkyScan query 04:33:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:33:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:44 Parameters OK 04:33:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:44 Set A/D data flow result=40 04:33:44 Set A/D channel type result=40 04:33:44 Set A/D encoding result=40 04:33:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:44 Set channel filter=0.000000e+000 result=40 04:33:44 Config A/D Result=40 04:33:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:44 Get A/D filter: -9.255963e+061 result=40 04:33:44 Get A/D value=-858993460 result=40 04:33:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:44 Parameters OK 04:33:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:44 Set A/D data flow result=40 04:33:44 Set A/D channel type result=40 04:33:44 Set A/D encoding result=40 04:33:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:44 Set channel filter=0.000000e+000 result=40 04:33:44 Config A/D Result=40 04:33:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:44 Get A/D filter: -9.255963e+061 result=40 04:33:44 Get A/D value=-858993460 result=40 04:33:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:44 Aux= [UTC 2019-3-5 04:33:44] 04:33:44 Message to Camera, serial 112034 queued 04:34:21 Received message from Master: op=PointingHead serial=112047 04:34:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:34:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:34:21 Point started: ret=0 04:34:21 point_skyscan result=0 04:34:22 Check angles 04:34:22 SkyScan query 04:34:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:34:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:34:23 Message to Master queued w/err=0: serial=112047 error=0 04:34:28 Received message from Master: op=Filter serial=112048 04:34:28 Color wheel filter change from 0 to 0 04:34:28 FLIGetFilterPos err=0 currentPosition=0 04:34:28 FLIGetStepsRemaining err=0 RemainingSteps=0 04:34:28 Filter is already there-color wheel unchanged 04:34:28 Received message from Master: op=Shutter serial=112049 04:34:28 Shutter LASER close 04:34:28 Received message from Camera: op=State serial=112051 04:34:28 GetSingleValue result=40 Value=cccccccc 04:34:28 SkyScan query 04:34:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:34:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:29 Parameters OK 04:34:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:29 Set A/D data flow result=40 04:34:29 Set A/D channel type result=40 04:34:29 Set A/D encoding result=40 04:34:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:29 Set channel filter=0.000000e+000 result=40 04:34:29 Config A/D Result=40 04:34:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:29 Get A/D filter: -9.255963e+061 result=40 04:34:29 Get A/D value=-858993460 result=40 04:34:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:29 Parameters OK 04:34:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:29 Set A/D data flow result=40 04:34:29 Set A/D channel type result=40 04:34:29 Set A/D encoding result=40 04:34:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:29 Set channel filter=0.000000e+000 result=40 04:34:29 Config A/D Result=40 04:34:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:29 Get A/D filter: -9.255963e+061 result=40 04:34:29 Get A/D value=-858993460 result=40 04:34:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:34:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:34:29 Aux= 04:34:29 Message to Camera, serial 112051 queued 04:35:05 Received message from Master: op=PointingHead serial=112064 04:35:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:35:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:35:06 Point started: ret=0 04:35:06 point_skyscan result=0 04:35:07 Check angles 04:35:07 SkyScan query 04:35:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 04:35:07 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 04:35:07 Check angles 04:35:07 SkyScan query 04:35:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.25<-14950 Statuses=0008 0009 04:35:08 Msec=750 True Az=112.995 Ze=-44.25 Az status=0008 Ze status=0009 04:35:08 Check angles 04:35:08 SkyScan query 04:35:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.625<-16375 Statuses=0008 0009 04:35:09 Msec=1500 True Az=112.995 Ze=-65.625 Az status=0008 Ze status=0009 04:35:09 Check angles 04:35:09 SkyScan query 04:35:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.015<-17801 Statuses=0008 0009 04:35:09 Msec=2250 True Az=112.995 Ze=-87.015 Az status=0008 Ze status=0009 04:35:10 Check angles 04:35:10 SkyScan query 04:35:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.955<-19197 Statuses=0008 0009 04:35:10 Msec=3000 True Az=112.995 Ze=-107.955 Az status=0008 Ze status=0009 04:35:10 Check angles 04:35:10 SkyScan query 04:35:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.36<-20624 Statuses=0008 0009 04:35:11 Msec=3750 True Az=112.995 Ze=-129.36 Az status=0008 Ze status=0009 04:35:11 Check angles 04:35:11 SkyScan query 04:35:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.735<-22049 Statuses=0008 0009 04:35:12 Msec=4500 True Az=112.995 Ze=-150.735 Az status=0008 Ze status=0009 04:35:12 Check angles 04:35:12 SkyScan query 04:35:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.72<-23448 Statuses=0008 0009 04:35:12 Msec=5250 True Az=112.995 Ze=-171.72 Az status=0008 Ze status=0009 04:35:13 Check angles 04:35:13 SkyScan query 04:35:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:35:13 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:35:13 Message to Master queued w/err=0: serial=112064 error=0 04:35:18 Received message from Master: op=Filter serial=112065 04:35:18 Color wheel filter change from 0 to 0 04:35:18 FLIGetFilterPos err=0 currentPosition=0 04:35:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:35:18 Filter is already there-color wheel unchanged 04:35:18 Received message from Master: op=Shutter serial=112066 04:35:18 Shutter LASER open 04:35:19 Received message from Camera: op=State serial=112068 04:35:19 GetSingleValue result=40 Value=cccccccc 04:35:19 SkyScan query 04:35:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:35:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:19 Parameters OK 04:35:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:19 Set A/D data flow result=40 04:35:19 Set A/D channel type result=40 04:35:19 Set A/D encoding result=40 04:35:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:19 Set channel filter=0.000000e+000 result=40 04:35:19 Config A/D Result=40 04:35:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:19 Get A/D filter: -9.255963e+061 result=40 04:35:19 Get A/D value=-858993460 result=40 04:35:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:19 Parameters OK 04:35:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:19 Set A/D data flow result=40 04:35:19 Set A/D channel type result=40 04:35:19 Set A/D encoding result=40 04:35:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:19 Set channel filter=0.000000e+000 result=40 04:35:19 Config A/D Result=40 04:35:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:19 Get A/D filter: -9.255963e+061 result=40 04:35:19 Get A/D value=-858993460 result=40 04:35:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:35:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:35:19 Aux= 04:35:19 Message to Camera, serial 112068 queued 04:35:28 Received message from Master: op=Shutter serial=112078 04:35:28 Shutter LASER close 04:35:28 Received message from Master: op=PointingHead serial=112082 04:35:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:35:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:35:29 Point started: ret=0 04:35:29 point_skyscan result=0 04:35:29 Check angles 04:35:29 SkyScan query 04:35:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.86<-21524 Statuses=0008 0009 04:35:30 Msec=0 True Az=112.995 Ze=-142.86 Az status=0008 Ze status=0009 04:35:30 Check angles 04:35:30 SkyScan query 04:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.875<-20125 Statuses=0008 0009 04:35:31 Msec=750 True Az=112.995 Ze=-121.875 Az status=0008 Ze status=0009 04:35:31 Check angles 04:35:31 SkyScan query 04:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.95<-18730 Statuses=0008 0009 04:35:31 Msec=1500 True Az=112.995 Ze=-100.95 Az status=0008 Ze status=0009 04:35:32 Check angles 04:35:32 SkyScan query 04:35:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.01<-17334 Statuses=0008 0009 04:35:32 Msec=2250 True Az=112.995 Ze=-80.01 Az status=0008 Ze status=0009 04:35:32 Check angles 04:35:32 SkyScan query 04:35:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.055<-15937 Statuses=0008 0009 04:35:33 Msec=3000 True Az=112.995 Ze=-59.055 Az status=0008 Ze status=0009 04:35:33 Check angles 04:35:33 SkyScan query 04:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.07<-14538 Statuses=0008 0009 04:35:34 Msec=3750 True Az=112.995 Ze=-38.07 Az status=0008 Ze status=0009 04:35:34 Check angles 04:35:34 SkyScan query 04:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.68<-13112 Statuses=0008 0009 04:35:34 Msec=4500 True Az=112.995 Ze=-16.68 Az status=0008 Ze status=0009 04:35:35 Check angles 04:35:35 SkyScan query 04:35:35 SkyScan query done: ret=0 az=112.995<-7533 ze=4.245<-11717 Statuses=0008 0009 04:35:35 Msec=5250 True Az=112.995 Ze=4.245 Az status=0008 Ze status=0009 04:35:35 Check angles 04:35:35 SkyScan query 04:35:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:35:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:35:36 Message to Master queued w/err=0: serial=112082 error=0 04:35:41 Received message from Master: op=Filter serial=112083 04:35:41 Color wheel filter change from 0 to 0 04:35:41 FLIGetFilterPos err=0 currentPosition=0 04:35:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:35:41 Filter is already there-color wheel unchanged 04:35:41 Received message from Master: op=Shutter serial=112084 04:35:41 Shutter LASER close 04:35:41 Received message from Camera: op=State serial=112086 04:35:41 GetSingleValue result=40 Value=cccccccc 04:35:41 SkyScan query 04:35:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:35:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:42 Parameters OK 04:35:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:42 Set A/D data flow result=40 04:35:42 Set A/D channel type result=40 04:35:42 Set A/D encoding result=40 04:35:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:42 Set channel filter=0.000000e+000 result=40 04:35:42 Config A/D Result=40 04:35:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:42 Get A/D filter: -9.255963e+061 result=40 04:35:42 Get A/D value=-858993460 result=40 04:35:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:42 Parameters OK 04:35:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:42 Set A/D data flow result=40 04:35:42 Set A/D channel type result=40 04:35:42 Set A/D encoding result=40 04:35:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:42 Set channel filter=0.000000e+000 result=40 04:35:42 Config A/D Result=40 04:35:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:42 Get A/D filter: -9.255963e+061 result=40 04:35:42 Get A/D value=-858993460 result=40 04:35:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:35:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:35:42 Aux= 04:35:42 Message to Camera, serial 112086 queued 04:36:19 Received message from Master: op=PointingHead serial=112099 04:36:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:36:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:36:19 Point started: ret=0 04:36:19 point_skyscan result=0 04:36:20 Check angles 04:36:20 SkyScan query 04:36:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:36:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:36:20 Message to Master queued w/err=0: serial=112099 error=0 04:36:25 Received message from Master: op=Filter serial=112100 04:36:25 Color wheel filter change from 0 to 0 04:36:25 FLIGetFilterPos err=0 currentPosition=0 04:36:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:25 Filter is already there-color wheel unchanged 04:36:25 Received message from Master: op=Shutter serial=112101 04:36:25 Shutter LASER close 04:36:25 Received message from Camera: op=State serial=112103 04:36:25 GetSingleValue result=40 Value=cccccccc 04:36:25 SkyScan query 04:36:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:36:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:26 Parameters OK 04:36:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:26 Set A/D data flow result=40 04:36:26 Set A/D channel type result=40 04:36:26 Set A/D encoding result=40 04:36:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:26 Set channel filter=0.000000e+000 result=40 04:36:26 Config A/D Result=40 04:36:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:26 Get A/D filter: -9.255963e+061 result=40 04:36:26 Get A/D value=-858993460 result=40 04:36:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:26 Parameters OK 04:36:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:26 Set A/D data flow result=40 04:36:26 Set A/D channel type result=40 04:36:26 Set A/D encoding result=40 04:36:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:26 Set channel filter=0.000000e+000 result=40 04:36:26 Config A/D Result=40 04:36:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:26 Get A/D filter: -9.255963e+061 result=40 04:36:26 Get A/D value=-858993460 result=40 04:36:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:26 Aux= 04:36:26 Message to Camera, serial 112103 queued 04:37:03 Received message from Master: op=PointingHead serial=112116 04:37:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:37:03 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:37:03 Point started: ret=0 04:37:03 point_skyscan result=0 04:37:04 Check angles 04:37:04 SkyScan query 04:37:05 SkyScan query done: ret=0 az=135.93<-9062 ze=-6.51<-12434 Statuses=0009 0008 04:37:05 Msec=0 True Az=135.93 Ze=-6.51 Az status=0009 Ze status=0008 04:37:05 Check angles 04:37:05 SkyScan query 04:37:05 SkyScan query done: ret=0 az=153.51<-10234 ze=-6.495<-12433 Statuses=0009 0008 04:37:05 Msec=750 True Az=153.51 Ze=-6.495 Az status=0009 Ze status=0008 04:37:06 Check angles 04:37:06 SkyScan query 04:37:06 SkyScan query done: ret=0 az=170.91<-11394 ze=-6.495<-12433 Statuses=0009 0008 04:37:06 Msec=1500 True Az=170.91 Ze=-6.495 Az status=0009 Ze status=0008 04:37:06 Check angles 04:37:06 SkyScan query 04:37:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:37:07 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:37:07 Message to Master queued w/err=0: serial=112116 error=0 04:37:12 Received message from Master: op=Filter serial=112117 04:37:12 Color wheel filter change from 0 to 0 04:37:12 FLIGetFilterPos err=0 currentPosition=0 04:37:12 FLIGetStepsRemaining err=0 RemainingSteps=0 04:37:12 Filter is already there-color wheel unchanged 04:37:12 Received message from Master: op=Shutter serial=112118 04:37:12 Shutter LASER close 04:37:12 Received message from Camera: op=State serial=112120 04:37:12 GetSingleValue result=40 Value=cccccccc 04:37:12 SkyScan query 04:37:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:37:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:13 Parameters OK 04:37:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:13 Set A/D data flow result=40 04:37:13 Set A/D channel type result=40 04:37:13 Set A/D encoding result=40 04:37:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:13 Set channel filter=0.000000e+000 result=40 04:37:13 Config A/D Result=40 04:37:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:13 Get A/D filter: -9.255963e+061 result=40 04:37:13 Get A/D value=-858993460 result=40 04:37:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:13 Parameters OK 04:37:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:13 Set A/D data flow result=40 04:37:13 Set A/D channel type result=40 04:37:13 Set A/D encoding result=40 04:37:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:13 Set channel filter=0.000000e+000 result=40 04:37:13 Config A/D Result=40 04:37:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:13 Get A/D filter: -9.255963e+061 result=40 04:37:13 Get A/D value=-858993460 result=40 04:37:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:37:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:37:13 Aux= 04:37:13 Message to Camera, serial 112120 queued 04:37:50 Received message from Master: op=PointingHead serial=112133 04:37:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:37:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:37:50 Point started: ret=0 04:37:50 point_skyscan result=0 04:37:51 Check angles 04:37:51 SkyScan query 04:37:51 SkyScan query done: ret=0 az=153.105<-10207 ze=6.51<-11566 Statuses=0009 0008 04:37:51 Msec=0 True Az=153.105 Ze=6.51 Az status=0009 Ze status=0008 04:37:51 Check angles 04:37:51 SkyScan query 04:37:52 SkyScan query done: ret=0 az=135.195<-9013 ze=6.495<-11567 Statuses=0009 0008 04:37:52 Msec=750 True Az=135.195 Ze=6.495 Az status=0009 Ze status=0008 04:37:52 Check angles 04:37:52 SkyScan query 04:37:53 SkyScan query done: ret=0 az=117.705<-7847 ze=6.495<-11567 Statuses=0009 0008 04:37:53 Msec=1500 True Az=117.705 Ze=6.495 Az status=0009 Ze status=0008 04:37:53 Check angles 04:37:53 SkyScan query 04:37:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:37:53 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:37:53 Message to Master queued w/err=0: serial=112133 error=0 04:37:58 Received message from Master: op=Filter serial=112134 04:37:58 Color wheel filter change from 0 to 0 04:37:58 FLIGetFilterPos err=0 currentPosition=0 04:37:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:37:58 Filter is already there-color wheel unchanged 04:37:59 Received message from Master: op=Shutter serial=112135 04:37:59 Shutter LASER close 04:37:59 Received message from Camera: op=State serial=112137 04:37:59 GetSingleValue result=40 Value=cccccccc 04:37:59 SkyScan query 04:37:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:37:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:59 Parameters OK 04:37:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:59 Set A/D data flow result=40 04:37:59 Set A/D channel type result=40 04:37:59 Set A/D encoding result=40 04:37:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:59 Set channel filter=0.000000e+000 result=40 04:37:59 Config A/D Result=40 04:37:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:59 Get A/D filter: -9.255963e+061 result=40 04:37:59 Get A/D value=-858993460 result=40 04:37:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:59 Parameters OK 04:37:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:59 Set A/D data flow result=40 04:37:59 Set A/D channel type result=40 04:37:59 Set A/D encoding result=40 04:37:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:59 Set channel filter=0.000000e+000 result=40 04:37:59 Config A/D Result=40 04:37:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:59 Get A/D filter: -9.255963e+061 result=40 04:37:59 Get A/D value=-858993460 result=40 04:37:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:37:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:37:59 Aux= 04:37:59 Message to Camera, serial 112137 queued 04:38:36 Received message from Master: op=PointingHead serial=112150 04:38:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:38:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:38:36 Point started: ret=0 04:38:36 point_skyscan result=0 04:38:37 Check angles 04:38:37 SkyScan query 04:38:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.55<-13570 Statuses=0008 0009 04:38:38 Msec=0 True Az=112.995 Ze=-23.55 Az status=0008 Ze status=0009 04:38:38 Check angles 04:38:38 SkyScan query 04:38:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 04:38:38 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 04:38:39 Check angles 04:38:39 SkyScan query 04:38:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.475<-16365 Statuses=0008 0009 04:38:39 Msec=1500 True Az=112.995 Ze=-65.475 Az status=0008 Ze status=0009 04:38:39 Check angles 04:38:39 SkyScan query 04:38:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.835<-17789 Statuses=0008 0009 04:38:40 Msec=2250 True Az=112.995 Ze=-86.835 Az status=0008 Ze status=0009 04:38:40 Check angles 04:38:40 SkyScan query 04:38:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.805<-19187 Statuses=0008 0009 04:38:41 Msec=3000 True Az=112.995 Ze=-107.805 Az status=0008 Ze status=0009 04:38:41 Check angles 04:38:41 SkyScan query 04:38:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.745<-20583 Statuses=0008 0009 04:38:41 Msec=3750 True Az=112.995 Ze=-128.745 Az status=0008 Ze status=0009 04:38:42 Check angles 04:38:42 SkyScan query 04:38:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 04:38:42 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 04:38:42 Check angles 04:38:42 SkyScan query 04:38:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.985<-23399 Statuses=0008 0009 04:38:43 Msec=5250 True Az=112.995 Ze=-170.985 Az status=0008 Ze status=0009 04:38:43 Check angles 04:38:43 SkyScan query 04:38:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:38:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:38:44 Message to Master queued w/err=0: serial=112150 error=0 04:38:49 Received message from Master: op=Filter serial=112151 04:38:49 Color wheel filter change from 0 to 0 04:38:49 FLIGetFilterPos err=0 currentPosition=0 04:38:49 FLIGetStepsRemaining err=0 RemainingSteps=0 04:38:49 Filter is already there-color wheel unchanged 04:38:49 Received message from Master: op=Shutter serial=112152 04:38:49 Shutter LASER open 04:38:49 Received message from Camera: op=State serial=112154 04:38:49 GetSingleValue result=40 Value=cccccccc 04:38:49 SkyScan query 04:38:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:38:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:50 Parameters OK 04:38:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:50 Set A/D data flow result=40 04:38:50 Set A/D channel type result=40 04:38:50 Set A/D encoding result=40 04:38:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:50 Set channel filter=0.000000e+000 result=40 04:38:50 Config A/D Result=40 04:38:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:50 Get A/D filter: -9.255963e+061 result=40 04:38:50 Get A/D value=-858993460 result=40 04:38:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:50 Parameters OK 04:38:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:50 Set A/D data flow result=40 04:38:50 Set A/D channel type result=40 04:38:50 Set A/D encoding result=40 04:38:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:50 Set channel filter=0.000000e+000 result=40 04:38:50 Config A/D Result=40 04:38:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:50 Get A/D filter: -9.255963e+061 result=40 04:38:50 Get A/D value=-858993460 result=40 04:38:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:50 Aux= 04:38:50 Message to Camera, serial 112154 queued 04:38:58 Received message from Master: op=Shutter serial=112164 04:38:58 Shutter LASER close 04:38:59 Received message from Master: op=PointingHead serial=112168 04:38:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:38:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:38:59 Point started: ret=0 04:38:59 point_skyscan result=0 04:39:00 Check angles 04:39:00 SkyScan query 04:39:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 04:39:00 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 04:39:00 Check angles 04:39:00 SkyScan query 04:39:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 04:39:01 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 04:39:01 Check angles 04:39:01 SkyScan query 04:39:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 04:39:02 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 04:39:02 Check angles 04:39:02 SkyScan query 04:39:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 04:39:02 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 04:39:03 Check angles 04:39:03 SkyScan query 04:39:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 04:39:03 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 04:39:03 Check angles 04:39:03 SkyScan query 04:39:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.28<-14552 Statuses=0008 0009 04:39:04 Msec=3750 True Az=112.995 Ze=-38.28 Az status=0008 Ze status=0009 04:39:04 Check angles 04:39:04 SkyScan query 04:39:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.34<-13156 Statuses=0008 0009 04:39:05 Msec=4500 True Az=112.995 Ze=-17.34 Az status=0008 Ze status=0009 04:39:05 Check angles 04:39:05 SkyScan query 04:39:05 SkyScan query done: ret=0 az=112.995<-7533 ze=3.615<-11759 Statuses=0008 0009 04:39:05 Msec=5250 True Az=112.995 Ze=3.615 Az status=0008 Ze status=0009 04:39:06 Check angles 04:39:06 SkyScan query 04:39:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:39:06 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:39:06 Message to Master queued w/err=0: serial=112168 error=0 04:39:11 Received message from Master: op=Filter serial=112169 04:39:11 Color wheel filter change from 0 to 0 04:39:11 FLIGetFilterPos err=0 currentPosition=0 04:39:11 FLIGetStepsRemaining err=0 RemainingSteps=0 04:39:11 Filter is already there-color wheel unchanged 04:39:11 Received message from Master: op=Shutter serial=112170 04:39:11 Shutter LASER close 04:39:12 Received message from Camera: op=State serial=112172 04:39:12 GetSingleValue result=40 Value=cccccccc 04:39:12 SkyScan query 04:39:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:39:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:12 Parameters OK 04:39:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:12 Set A/D data flow result=40 04:39:12 Set A/D channel type result=40 04:39:12 Set A/D encoding result=40 04:39:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:12 Set channel filter=0.000000e+000 result=40 04:39:12 Config A/D Result=40 04:39:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:12 Get A/D filter: -9.255963e+061 result=40 04:39:12 Get A/D value=-858993460 result=40 04:39:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:12 Parameters OK 04:39:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:12 Set A/D data flow result=40 04:39:12 Set A/D channel type result=40 04:39:12 Set A/D encoding result=40 04:39:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:12 Set channel filter=0.000000e+000 result=40 04:39:12 Config A/D Result=40 04:39:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:12 Get A/D filter: -9.255963e+061 result=40 04:39:12 Get A/D value=-858993460 result=40 04:39:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:39:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:39:12 Aux= 04:39:12 Message to Camera, serial 112172 queued 04:39:49 Received message from Master: op=PointingHead serial=112185 04:39:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:39:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:39:49 Point started: ret=0 04:39:49 point_skyscan result=0 04:39:50 Check angles 04:39:50 SkyScan query 04:39:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:39:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:39:51 Message to Master queued w/err=0: serial=112185 error=0 04:39:56 Received message from Master: op=Filter serial=112186 04:39:56 Color wheel filter change from 0 to 0 04:39:56 FLIGetFilterPos err=0 currentPosition=0 04:39:56 FLIGetStepsRemaining err=0 RemainingSteps=0 04:39:56 Filter is already there-color wheel unchanged 04:39:56 Received message from Master: op=Shutter serial=112187 04:39:56 Shutter LASER close 04:39:56 Received message from Camera: op=State serial=112189 04:39:56 GetSingleValue result=40 Value=cccccccc 04:39:56 SkyScan query 04:39:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:39:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:57 Parameters OK 04:39:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:57 Set A/D data flow result=40 04:39:57 Set A/D channel type result=40 04:39:57 Set A/D encoding result=40 04:39:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:57 Set channel filter=0.000000e+000 result=40 04:39:57 Config A/D Result=40 04:39:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:57 Get A/D filter: -9.255963e+061 result=40 04:39:57 Get A/D value=-858993460 result=40 04:39:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:57 Parameters OK 04:39:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:57 Set A/D data flow result=40 04:39:57 Set A/D channel type result=40 04:39:57 Set A/D encoding result=40 04:39:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:57 Set channel filter=0.000000e+000 result=40 04:39:57 Config A/D Result=40 04:39:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:57 Get A/D filter: -9.255963e+061 result=40 04:39:57 Get A/D value=-858993460 result=40 04:39:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:39:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:39:57 Aux= 04:39:57 Message to Camera, serial 112189 queued 04:40:33 Received message from Master: op=PointingHead serial=112202 04:40:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:40:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:40:34 Point started: ret=0 04:40:34 point_skyscan result=0 04:40:35 Check angles 04:40:35 SkyScan query 04:40:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:40:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:40:35 Message to Master queued w/err=0: serial=112202 error=0 04:40:40 Received message from Master: op=Filter serial=112203 04:40:40 Color wheel filter change from 0 to 0 04:40:40 FLIGetFilterPos err=0 currentPosition=0 04:40:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:40:40 Filter is already there-color wheel unchanged 04:40:40 Received message from Master: op=Shutter serial=112204 04:40:40 Shutter LASER close 04:40:40 Received message from Camera: op=State serial=112206 04:40:40 GetSingleValue result=40 Value=cccccccc 04:40:40 SkyScan query 04:40:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:40:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:41 Parameters OK 04:40:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:41 Set A/D data flow result=40 04:40:41 Set A/D channel type result=40 04:40:41 Set A/D encoding result=40 04:40:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:41 Set channel filter=0.000000e+000 result=40 04:40:41 Config A/D Result=40 04:40:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:41 Get A/D filter: -9.255963e+061 result=40 04:40:41 Get A/D value=-858993460 result=40 04:40:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:41 Parameters OK 04:40:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:41 Set A/D data flow result=40 04:40:41 Set A/D channel type result=40 04:40:41 Set A/D encoding result=40 04:40:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:41 Set channel filter=0.000000e+000 result=40 04:40:41 Config A/D Result=40 04:40:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:41 Get A/D filter: -9.255963e+061 result=40 04:40:41 Get A/D value=-858993460 result=40 04:40:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:40:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:40:41 Aux= 04:40:41 Message to Camera, serial 112206 queued 04:41:18 Received message from Master: op=PointingHead serial=112219 04:41:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:41:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:41:18 Point started: ret=0 04:41:18 point_skyscan result=0 04:41:19 Check angles 04:41:19 SkyScan query 04:41:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:41:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:41:19 Message to Master queued w/err=0: serial=112219 error=0 04:41:24 Received message from Master: op=Filter serial=112220 04:41:24 Color wheel filter change from 0 to 0 04:41:24 FLIGetFilterPos err=0 currentPosition=0 04:41:24 FLIGetStepsRemaining err=0 RemainingSteps=0 04:41:24 Filter is already there-color wheel unchanged 04:41:25 Received message from Master: op=Shutter serial=112221 04:41:25 Shutter LASER close 04:41:25 Received message from Camera: op=State serial=112223 04:41:25 GetSingleValue result=40 Value=cccccccc 04:41:25 SkyScan query 04:41:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:41:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:25 Parameters OK 04:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:25 Set A/D data flow result=40 04:41:25 Set A/D channel type result=40 04:41:25 Set A/D encoding result=40 04:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:25 Set channel filter=0.000000e+000 result=40 04:41:25 Config A/D Result=40 04:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:25 Get A/D filter: -9.255963e+061 result=40 04:41:25 Get A/D value=-858993460 result=40 04:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:25 Parameters OK 04:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:25 Set A/D data flow result=40 04:41:25 Set A/D channel type result=40 04:41:25 Set A/D encoding result=40 04:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:25 Set channel filter=0.000000e+000 result=40 04:41:25 Config A/D Result=40 04:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:25 Get A/D filter: -9.255963e+061 result=40 04:41:25 Get A/D value=-858993460 result=40 04:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:41:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:41:25 Aux= 04:41:25 Message to Camera, serial 112223 queued 04:42:01 Received message from Master: op=PointingHead serial=112235 04:42:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:42:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:42:01 Point started: ret=0 04:42:01 point_skyscan result=0 04:42:02 Check angles 04:42:02 SkyScan query 04:42:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 04:42:03 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 04:42:03 Check angles 04:42:03 SkyScan query 04:42:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.22<-14948 Statuses=0008 0009 04:42:03 Msec=750 True Az=112.995 Ze=-44.22 Az status=0008 Ze status=0009 04:42:04 Check angles 04:42:04 SkyScan query 04:42:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.595<-16373 Statuses=0008 0009 04:42:04 Msec=1500 True Az=112.995 Ze=-65.595 Az status=0008 Ze status=0009 04:42:04 Check angles 04:42:04 SkyScan query 04:42:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.985<-17799 Statuses=0008 0009 04:42:05 Msec=2250 True Az=112.995 Ze=-86.985 Az status=0008 Ze status=0009 04:42:05 Check angles 04:42:05 SkyScan query 04:42:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.925<-19195 Statuses=0008 0009 04:42:06 Msec=3000 True Az=112.995 Ze=-107.925 Az status=0008 Ze status=0009 04:42:06 Check angles 04:42:06 SkyScan query 04:42:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.865<-20591 Statuses=0008 0009 04:42:06 Msec=3750 True Az=112.995 Ze=-128.865 Az status=0008 Ze status=0009 04:42:07 Check angles 04:42:07 SkyScan query 04:42:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 04:42:07 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 04:42:07 Check angles 04:42:07 SkyScan query 04:42:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.745<-23383 Statuses=0008 0009 04:42:08 Msec=5250 True Az=112.995 Ze=-170.745 Az status=0008 Ze status=0009 04:42:08 Check angles 04:42:08 SkyScan query 04:42:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:42:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:42:09 Message to Master queued w/err=0: serial=112235 error=0 04:42:14 Received message from Master: op=Filter serial=112236 04:42:14 Color wheel filter change from 0 to 0 04:42:14 FLIGetFilterPos err=0 currentPosition=0 04:42:14 FLIGetStepsRemaining err=0 RemainingSteps=0 04:42:14 Filter is already there-color wheel unchanged 04:42:14 Received message from Master: op=Shutter serial=112237 04:42:14 Shutter LASER open 04:42:14 Received message from Camera: op=State serial=112239 04:42:14 GetSingleValue result=40 Value=cccccccc 04:42:14 SkyScan query 04:42:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:42:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:15 Parameters OK 04:42:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:15 Set A/D data flow result=40 04:42:15 Set A/D channel type result=40 04:42:15 Set A/D encoding result=40 04:42:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:15 Set channel filter=0.000000e+000 result=40 04:42:15 Config A/D Result=40 04:42:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:15 Get A/D filter: -9.255963e+061 result=40 04:42:15 Get A/D value=-858993460 result=40 04:42:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:15 Parameters OK 04:42:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:15 Set A/D data flow result=40 04:42:15 Set A/D channel type result=40 04:42:15 Set A/D encoding result=40 04:42:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:15 Set channel filter=0.000000e+000 result=40 04:42:15 Config A/D Result=40 04:42:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:15 Get A/D filter: -9.255963e+061 result=40 04:42:15 Get A/D value=-858993460 result=40 04:42:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:42:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:42:15 Aux= 04:42:15 Message to Camera, serial 112239 queued 04:42:23 Received message from Master: op=Shutter serial=112249 04:42:23 Shutter LASER close 04:42:24 Received message from Master: op=PointingHead serial=112253 04:42:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:42:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:42:24 Point started: ret=0 04:42:24 point_skyscan result=0 04:42:25 Check angles 04:42:25 SkyScan query 04:42:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 04:42:25 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 04:42:26 Check angles 04:42:26 SkyScan query 04:42:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.89<-20126 Statuses=0008 0009 04:42:26 Msec=750 True Az=112.995 Ze=-121.89 Az status=0008 Ze status=0009 04:42:26 Check angles 04:42:26 SkyScan query 04:42:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.545<-18703 Statuses=0008 0009 04:42:27 Msec=1500 True Az=112.995 Ze=-100.545 Az status=0008 Ze status=0009 04:42:27 Check angles 04:42:27 SkyScan query 04:42:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.575<-17305 Statuses=0008 0009 04:42:28 Msec=2250 True Az=112.995 Ze=-79.575 Az status=0008 Ze status=0009 04:42:28 Check angles 04:42:28 SkyScan query 04:42:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.14<-15876 Statuses=0008 0009 04:42:28 Msec=3000 True Az=112.995 Ze=-58.14 Az status=0008 Ze status=0009 04:42:29 Check angles 04:42:29 SkyScan query 04:42:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.78<-14452 Statuses=0008 0009 04:42:29 Msec=3750 True Az=112.995 Ze=-36.78 Az status=0008 Ze status=0009 04:42:29 Check angles 04:42:29 SkyScan query 04:42:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.405<-13027 Statuses=0008 0009 04:42:30 Msec=4500 True Az=112.995 Ze=-15.405 Az status=0008 Ze status=0009 04:42:30 Check angles 04:42:30 SkyScan query 04:42:31 SkyScan query done: ret=0 az=112.995<-7533 ze=5.19<-11654 Statuses=0008 0009 04:42:31 Msec=5250 True Az=112.995 Ze=5.19 Az status=0008 Ze status=0009 04:42:31 Check angles 04:42:31 SkyScan query 04:42:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:42:31 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:42:31 Message to Master queued w/err=0: serial=112253 error=0 04:42:36 Received message from Master: op=Filter serial=112254 04:42:36 Color wheel filter change from 0 to 0 04:42:36 FLIGetFilterPos err=0 currentPosition=0 04:42:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:42:36 Filter is already there-color wheel unchanged 04:42:37 Received message from Master: op=Shutter serial=112255 04:42:37 Shutter LASER close 04:42:37 Received message from Camera: op=State serial=112257 04:42:37 GetSingleValue result=40 Value=cccccccc 04:42:37 SkyScan query 04:42:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:42:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:37 Parameters OK 04:42:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:37 Set A/D data flow result=40 04:42:37 Set A/D channel type result=40 04:42:37 Set A/D encoding result=40 04:42:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:37 Set channel filter=0.000000e+000 result=40 04:42:37 Config A/D Result=40 04:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:37 Get A/D filter: -9.255963e+061 result=40 04:42:37 Get A/D value=-858993460 result=40 04:42:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:37 Parameters OK 04:42:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:37 Set A/D data flow result=40 04:42:37 Set A/D channel type result=40 04:42:37 Set A/D encoding result=40 04:42:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:37 Set channel filter=0.000000e+000 result=40 04:42:37 Config A/D Result=40 04:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:37 Get A/D filter: -9.255963e+061 result=40 04:42:37 Get A/D value=-858993460 result=40 04:42:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:42:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:42:37 Aux= 04:42:37 Message to Camera, serial 112257 queued 04:43:14 Received message from Master: op=PointingHead serial=112270 04:43:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:43:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:43:15 Point started: ret=0 04:43:15 point_skyscan result=0 04:43:15 Check angles 04:43:15 SkyScan query 04:43:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:43:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:43:16 Message to Master queued w/err=0: serial=112270 error=0 04:43:21 Received message from Master: op=Filter serial=112271 04:43:21 Color wheel filter change from 0 to 0 04:43:21 FLIGetFilterPos err=0 currentPosition=0 04:43:21 FLIGetStepsRemaining err=0 RemainingSteps=0 04:43:21 Filter is already there-color wheel unchanged 04:43:21 Received message from Master: op=Shutter serial=112272 04:43:21 Shutter LASER close 04:43:21 Received message from Camera: op=State serial=112274 04:43:21 GetSingleValue result=40 Value=cccccccc 04:43:21 SkyScan query 04:43:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:43:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:22 Parameters OK 04:43:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:22 Set A/D data flow result=40 04:43:22 Set A/D channel type result=40 04:43:22 Set A/D encoding result=40 04:43:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:22 Set channel filter=0.000000e+000 result=40 04:43:22 Config A/D Result=40 04:43:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:22 Get A/D filter: -9.255963e+061 result=40 04:43:22 Get A/D value=-858993460 result=40 04:43:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:22 Parameters OK 04:43:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:22 Set A/D data flow result=40 04:43:22 Set A/D channel type result=40 04:43:22 Set A/D encoding result=40 04:43:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:22 Set channel filter=0.000000e+000 result=40 04:43:22 Config A/D Result=40 04:43:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:22 Get A/D filter: -9.255963e+061 result=40 04:43:22 Get A/D value=-858993460 result=40 04:43:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:43:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:43:22 Aux= 04:43:22 Message to Camera, serial 112274 queued [UTC 2019-3-5 04:43:50] 04:43:58 Received message from Master: op=PointingHead serial=112287 04:43:58 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:43:58 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:43:59 Point started: ret=0 04:43:59 point_skyscan result=0 04:44:00 Check angles 04:44:00 SkyScan query 04:44:00 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.51<-12434 Statuses=0009 0008 04:44:00 Msec=0 True Az=135.915 Ze=-6.51 Az status=0009 Ze status=0008 04:44:00 Check angles 04:44:00 SkyScan query 04:44:01 SkyScan query done: ret=0 az=153.36<-10224 ze=-6.495<-12433 Statuses=0009 0008 04:44:01 Msec=750 True Az=153.36 Ze=-6.495 Az status=0009 Ze status=0008 04:44:01 Check angles 04:44:01 SkyScan query 04:44:02 SkyScan query done: ret=0 az=170.85<-11390 ze=-6.495<-12433 Statuses=0009 0008 04:44:02 Msec=1500 True Az=170.85 Ze=-6.495 Az status=0009 Ze status=0008 04:44:02 Check angles 04:44:02 SkyScan query 04:44:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:44:02 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:44:02 Message to Master queued w/err=0: serial=112287 error=0 04:44:07 Received message from Master: op=Filter serial=112288 04:44:07 Color wheel filter change from 0 to 0 04:44:07 FLIGetFilterPos err=0 currentPosition=0 04:44:07 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:07 Filter is already there-color wheel unchanged 04:44:08 Received message from Master: op=Shutter serial=112289 04:44:08 Shutter LASER close 04:44:08 Received message from Camera: op=State serial=112291 04:44:08 GetSingleValue result=40 Value=cccccccc 04:44:08 SkyScan query 04:44:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:44:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:08 Parameters OK 04:44:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:08 Set A/D data flow result=40 04:44:08 Set A/D channel type result=40 04:44:08 Set A/D encoding result=40 04:44:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:08 Set channel filter=0.000000e+000 result=40 04:44:08 Config A/D Result=40 04:44:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:08 Get A/D filter: -9.255963e+061 result=40 04:44:08 Get A/D value=-858993460 result=40 04:44:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:08 Parameters OK 04:44:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:08 Set A/D data flow result=40 04:44:08 Set A/D channel type result=40 04:44:08 Set A/D encoding result=40 04:44:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:08 Set channel filter=0.000000e+000 result=40 04:44:08 Config A/D Result=40 04:44:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:08 Get A/D filter: -9.255963e+061 result=40 04:44:08 Get A/D value=-858993460 result=40 04:44:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:08 Aux= 04:44:08 Message to Camera, serial 112291 queued 04:44:45 Received message from Master: op=PointingHead serial=112304 04:44:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:44:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:44:45 Point started: ret=0 04:44:45 point_skyscan result=0 04:44:46 Check angles 04:44:46 SkyScan query 04:44:47 SkyScan query done: ret=0 az=153.105<-10207 ze=6.51<-11566 Statuses=0009 0008 04:44:47 Msec=0 True Az=153.105 Ze=6.51 Az status=0009 Ze status=0008 04:44:47 Check angles 04:44:47 SkyScan query 04:44:48 SkyScan query done: ret=0 az=135.675<-9045 ze=6.495<-11567 Statuses=0009 0008 04:44:48 Msec=750 True Az=135.675 Ze=6.495 Az status=0009 Ze status=0008 04:44:48 Check angles 04:44:48 SkyScan query 04:44:48 SkyScan query done: ret=0 az=117.69<-7846 ze=6.495<-11567 Statuses=0009 0008 04:44:48 Msec=1500 True Az=117.69 Ze=6.495 Az status=0009 Ze status=0008 04:44:48 Check angles 04:44:48 SkyScan query 04:44:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:44:49 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:44:49 Message to Master queued w/err=0: serial=112304 error=0 04:44:54 Received message from Master: op=Filter serial=112305 04:44:54 Color wheel filter change from 0 to 0 04:44:54 FLIGetFilterPos err=0 currentPosition=0 04:44:54 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:54 Filter is already there-color wheel unchanged 04:44:54 Received message from Master: op=Shutter serial=112306 04:44:54 Shutter LASER close 04:44:54 Received message from Camera: op=State serial=112308 04:44:54 GetSingleValue result=40 Value=cccccccc 04:44:54 SkyScan query 04:44:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:44:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:55 Parameters OK 04:44:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:55 Set A/D data flow result=40 04:44:55 Set A/D channel type result=40 04:44:55 Set A/D encoding result=40 04:44:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:55 Set channel filter=0.000000e+000 result=40 04:44:55 Config A/D Result=40 04:44:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:55 Get A/D filter: -9.255963e+061 result=40 04:44:55 Get A/D value=-858993460 result=40 04:44:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:55 Parameters OK 04:44:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:55 Set A/D data flow result=40 04:44:55 Set A/D channel type result=40 04:44:55 Set A/D encoding result=40 04:44:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:55 Set channel filter=0.000000e+000 result=40 04:44:55 Config A/D Result=40 04:44:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:55 Get A/D filter: -9.255963e+061 result=40 04:44:55 Get A/D value=-858993460 result=40 04:44:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:55 Aux= 04:44:55 Message to Camera, serial 112308 queued 04:45:32 Received message from Master: op=PointingHead serial=112321 04:45:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:45:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:45:32 Point started: ret=0 04:45:32 point_skyscan result=0 04:45:33 Check angles 04:45:33 SkyScan query 04:45:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.715<-13581 Statuses=0008 0009 04:45:33 Msec=0 True Az=112.995 Ze=-23.715 Az status=0008 Ze status=0009 04:45:34 Check angles 04:45:34 SkyScan query 04:45:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.67<-14978 Statuses=0008 0009 04:45:34 Msec=750 True Az=112.995 Ze=-44.67 Az status=0008 Ze status=0009 04:45:34 Check angles 04:45:34 SkyScan query 04:45:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.64<-16376 Statuses=0008 0009 04:45:35 Msec=1500 True Az=112.995 Ze=-65.64 Az status=0008 Ze status=0009 04:45:35 Check angles 04:45:35 SkyScan query 04:45:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-87<-17800 Statuses=0008 0009 04:45:36 Msec=2250 True Az=112.995 Ze=-87 Az status=0008 Ze status=0009 04:45:36 Check angles 04:45:36 SkyScan query 04:45:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.97<-19198 Statuses=0008 0009 04:45:36 Msec=3000 True Az=112.995 Ze=-107.97 Az status=0008 Ze status=0009 04:45:37 Check angles 04:45:37 SkyScan query 04:45:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.91<-20594 Statuses=0008 0009 04:45:37 Msec=3750 True Az=112.995 Ze=-128.91 Az status=0008 Ze status=0009 04:45:37 Check angles 04:45:37 SkyScan query 04:45:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.88<-21992 Statuses=0008 0009 04:45:38 Msec=4500 True Az=112.995 Ze=-149.88 Az status=0008 Ze status=0009 04:45:38 Check angles 04:45:38 SkyScan query 04:45:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.105<-23407 Statuses=0008 0009 04:45:39 Msec=5250 True Az=112.995 Ze=-171.105 Az status=0008 Ze status=0009 04:45:39 Check angles 04:45:39 SkyScan query 04:45:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:45:39 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:45:39 Message to Master queued w/err=0: serial=112321 error=0 04:45:44 Received message from Master: op=Filter serial=112322 04:45:44 Color wheel filter change from 0 to 0 04:45:44 FLIGetFilterPos err=0 currentPosition=0 04:45:44 FLIGetStepsRemaining err=0 RemainingSteps=0 04:45:44 Filter is already there-color wheel unchanged 04:45:45 Received message from Master: op=Shutter serial=112323 04:45:45 Shutter LASER open 04:45:45 Received message from Camera: op=State serial=112325 04:45:45 GetSingleValue result=40 Value=cccccccc 04:45:45 SkyScan query 04:45:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:45:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:45 Parameters OK 04:45:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:45 Set A/D data flow result=40 04:45:45 Set A/D channel type result=40 04:45:45 Set A/D encoding result=40 04:45:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:45 Set channel filter=0.000000e+000 result=40 04:45:45 Config A/D Result=40 04:45:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:45 Get A/D filter: -9.255963e+061 result=40 04:45:45 Get A/D value=-858993460 result=40 04:45:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:45 Parameters OK 04:45:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:45 Set A/D data flow result=40 04:45:45 Set A/D channel type result=40 04:45:45 Set A/D encoding result=40 04:45:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:45 Set channel filter=0.000000e+000 result=40 04:45:45 Config A/D Result=40 04:45:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:45 Get A/D filter: -9.255963e+061 result=40 04:45:45 Get A/D value=-858993460 result=40 04:45:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:45:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:45:45 Aux= 04:45:45 Message to Camera, serial 112325 queued 04:45:54 Received message from Master: op=Shutter serial=112335 04:45:54 Shutter LASER close 04:45:54 Received message from Master: op=PointingHead serial=112339 04:45:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:45:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:45:55 Point started: ret=0 04:45:55 point_skyscan result=0 04:45:55 Check angles 04:45:55 SkyScan query 04:45:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.86<-21524 Statuses=0008 0009 04:45:56 Msec=0 True Az=112.995 Ze=-142.86 Az status=0008 Ze status=0009 04:45:56 Check angles 04:45:56 SkyScan query 04:45:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.455<-20097 Statuses=0008 0009 04:45:57 Msec=750 True Az=112.995 Ze=-121.455 Az status=0008 Ze status=0009 04:45:57 Check angles 04:45:57 SkyScan query 04:45:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.065<-18671 Statuses=0008 0009 04:45:57 Msec=1500 True Az=112.995 Ze=-100.065 Az status=0008 Ze status=0009 04:45:58 Check angles 04:45:58 SkyScan query 04:45:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.095<-17273 Statuses=0008 0009 04:45:58 Msec=2250 True Az=112.995 Ze=-79.095 Az status=0008 Ze status=0009 04:45:58 Check angles 04:45:58 SkyScan query 04:45:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.125<-15875 Statuses=0008 0009 04:45:59 Msec=3000 True Az=112.995 Ze=-58.125 Az status=0008 Ze status=0009 04:45:59 Check angles 04:45:59 SkyScan query 04:46:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.215<-14481 Statuses=0008 0009 04:46:00 Msec=3750 True Az=112.995 Ze=-37.215 Az status=0008 Ze status=0009 04:46:00 Check angles 04:46:00 SkyScan query 04:46:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.23<-13082 Statuses=0008 0009 04:46:00 Msec=4500 True Az=112.995 Ze=-16.23 Az status=0008 Ze status=0009 04:46:01 Check angles 04:46:01 SkyScan query 04:46:01 SkyScan query done: ret=0 az=112.995<-7533 ze=4.59<-11694 Statuses=0008 0009 04:46:01 Msec=5250 True Az=112.995 Ze=4.59 Az status=0008 Ze status=0009 04:46:01 Check angles 04:46:01 SkyScan query 04:46:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:46:02 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:46:02 Message to Master queued w/err=0: serial=112339 error=0 04:46:07 Received message from Master: op=Filter serial=112340 04:46:07 Color wheel filter change from 0 to 0 04:46:07 FLIGetFilterPos err=0 currentPosition=0 04:46:07 FLIGetStepsRemaining err=0 RemainingSteps=0 04:46:07 Filter is already there-color wheel unchanged 04:46:07 Received message from Master: op=Shutter serial=112341 04:46:07 Shutter LASER close 04:46:07 Received message from Camera: op=State serial=112343 04:46:07 GetSingleValue result=40 Value=cccccccc 04:46:07 SkyScan query 04:46:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:46:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:08 Parameters OK 04:46:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:08 Set A/D data flow result=40 04:46:08 Set A/D channel type result=40 04:46:08 Set A/D encoding result=40 04:46:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:08 Set channel filter=0.000000e+000 result=40 04:46:08 Config A/D Result=40 04:46:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:08 Get A/D filter: -9.255963e+061 result=40 04:46:08 Get A/D value=-858993460 result=40 04:46:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:08 Parameters OK 04:46:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:08 Set A/D data flow result=40 04:46:08 Set A/D channel type result=40 04:46:08 Set A/D encoding result=40 04:46:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:08 Set channel filter=0.000000e+000 result=40 04:46:08 Config A/D Result=40 04:46:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:08 Get A/D filter: -9.255963e+061 result=40 04:46:08 Get A/D value=-858993460 result=40 04:46:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:46:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:46:08 Aux= 04:46:08 Message to Camera, serial 112343 queued 04:46:45 Received message from Master: op=PointingHead serial=112356 04:46:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:46:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:46:45 Point started: ret=0 04:46:45 point_skyscan result=0 04:46:46 Check angles 04:46:46 SkyScan query 04:46:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:46:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:46:46 Message to Master queued w/err=0: serial=112356 error=0 04:46:51 Received message from Master: op=Filter serial=112357 04:46:51 Color wheel filter change from 0 to 0 04:46:51 FLIGetFilterPos err=0 currentPosition=0 04:46:51 FLIGetStepsRemaining err=0 RemainingSteps=0 04:46:51 Filter is already there-color wheel unchanged 04:46:51 Received message from Master: op=Shutter serial=112358 04:46:51 Shutter LASER close 04:46:52 Received message from Camera: op=State serial=112360 04:46:52 GetSingleValue result=40 Value=cccccccc 04:46:52 SkyScan query 04:46:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:46:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:52 Parameters OK 04:46:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:52 Set A/D data flow result=40 04:46:52 Set A/D channel type result=40 04:46:52 Set A/D encoding result=40 04:46:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:52 Set channel filter=0.000000e+000 result=40 04:46:52 Config A/D Result=40 04:46:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:52 Get A/D filter: -9.255963e+061 result=40 04:46:52 Get A/D value=-858993460 result=40 04:46:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:52 Parameters OK 04:46:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:52 Set A/D data flow result=40 04:46:52 Set A/D channel type result=40 04:46:52 Set A/D encoding result=40 04:46:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:52 Set channel filter=0.000000e+000 result=40 04:46:52 Config A/D Result=40 04:46:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:52 Get A/D filter: -9.255963e+061 result=40 04:46:52 Get A/D value=-858993460 result=40 04:46:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:46:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:46:52 Aux= 04:46:52 Message to Camera, serial 112360 queued 04:47:29 Received message from Master: op=PointingHead serial=112373 04:47:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:47:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:47:29 Point started: ret=0 04:47:29 point_skyscan result=0 04:47:30 Check angles 04:47:30 SkyScan query 04:47:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:47:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:47:31 Message to Master queued w/err=0: serial=112373 error=0 04:47:36 Received message from Master: op=Filter serial=112374 04:47:36 Color wheel filter change from 0 to 0 04:47:36 FLIGetFilterPos err=0 currentPosition=0 04:47:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:47:36 Filter is already there-color wheel unchanged 04:47:36 Received message from Master: op=Shutter serial=112375 04:47:36 Shutter LASER close 04:47:36 Received message from Camera: op=State serial=112377 04:47:36 GetSingleValue result=40 Value=cccccccc 04:47:36 SkyScan query 04:47:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:47:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:36 Parameters OK 04:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:36 Set A/D data flow result=40 04:47:36 Set A/D channel type result=40 04:47:36 Set A/D encoding result=40 04:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:36 Set channel filter=0.000000e+000 result=40 04:47:36 Config A/D Result=40 04:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:36 Get A/D filter: -9.255963e+061 result=40 04:47:36 Get A/D value=-858993460 result=40 04:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:36 Parameters OK 04:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:36 Set A/D data flow result=40 04:47:36 Set A/D channel type result=40 04:47:36 Set A/D encoding result=40 04:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:36 Set channel filter=0.000000e+000 result=40 04:47:36 Config A/D Result=40 04:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:36 Get A/D filter: -9.255963e+061 result=40 04:47:36 Get A/D value=-858993460 result=40 04:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:47:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:47:36 Aux= 04:47:36 Message to Camera, serial 112377 queued 04:48:13 Received message from Master: op=PointingHead serial=112390 04:48:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:48:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:48:14 Point started: ret=0 04:48:14 point_skyscan result=0 04:48:14 Check angles 04:48:14 SkyScan query 04:48:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:48:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:48:15 Message to Master queued w/err=0: serial=112390 error=0 04:48:20 Received message from Master: op=Filter serial=112391 04:48:20 Color wheel filter change from 0 to 0 04:48:20 FLIGetFilterPos err=0 currentPosition=0 04:48:20 FLIGetStepsRemaining err=0 RemainingSteps=0 04:48:20 Filter is already there-color wheel unchanged 04:48:20 Received message from Master: op=Shutter serial=112392 04:48:20 Shutter LASER close 04:48:20 Received message from Camera: op=State serial=112394 04:48:20 GetSingleValue result=40 Value=cccccccc 04:48:20 SkyScan query 04:48:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:48:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:21 Parameters OK 04:48:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:21 Set A/D data flow result=40 04:48:21 Set A/D channel type result=40 04:48:21 Set A/D encoding result=40 04:48:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:21 Set channel filter=0.000000e+000 result=40 04:48:21 Config A/D Result=40 04:48:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:21 Get A/D filter: -9.255963e+061 result=40 04:48:21 Get A/D value=-858993460 result=40 04:48:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:21 Parameters OK 04:48:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:21 Set A/D data flow result=40 04:48:21 Set A/D channel type result=40 04:48:21 Set A/D encoding result=40 04:48:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:21 Set channel filter=0.000000e+000 result=40 04:48:21 Config A/D Result=40 04:48:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:21 Get A/D filter: -9.255963e+061 result=40 04:48:21 Get A/D value=-858993460 result=40 04:48:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:48:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:48:21 Aux= 04:48:21 Message to Camera, serial 112394 queued 04:48:57 Received message from Master: op=PointingHead serial=112407 04:48:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:48:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:48:58 Point started: ret=0 04:48:58 point_skyscan result=0 04:48:59 Check angles 04:48:59 SkyScan query 04:48:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 04:48:59 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 04:48:59 Check angles 04:48:59 SkyScan query 04:49:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.09<-15006 Statuses=0008 0009 04:49:00 Msec=750 True Az=112.995 Ze=-45.09 Az status=0008 Ze status=0009 04:49:00 Check angles 04:49:00 SkyScan query 04:49:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.045<-16403 Statuses=0008 0009 04:49:01 Msec=1500 True Az=112.995 Ze=-66.045 Az status=0008 Ze status=0009 04:49:01 Check angles 04:49:01 SkyScan query 04:49:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.06<-17804 Statuses=0008 0009 04:49:01 Msec=2250 True Az=112.995 Ze=-87.06 Az status=0008 Ze status=0009 04:49:02 Check angles 04:49:02 SkyScan query 04:49:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.39<-19226 Statuses=0008 0009 04:49:02 Msec=3000 True Az=112.995 Ze=-108.39 Az status=0008 Ze status=0009 04:49:02 Check angles 04:49:02 SkyScan query 04:49:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.345<-20623 Statuses=0008 0009 04:49:03 Msec=3750 True Az=112.995 Ze=-129.345 Az status=0008 Ze status=0009 04:49:03 Check angles 04:49:03 SkyScan query 04:49:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.3<-22020 Statuses=0008 0009 04:49:04 Msec=4500 True Az=112.995 Ze=-150.3 Az status=0008 Ze status=0009 04:49:04 Check angles 04:49:04 SkyScan query 04:49:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.09<-23406 Statuses=0008 0009 04:49:04 Msec=5250 True Az=112.995 Ze=-171.09 Az status=0008 Ze status=0009 04:49:05 Check angles 04:49:05 SkyScan query 04:49:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:49:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:49:05 Message to Master queued w/err=0: serial=112407 error=0 04:49:10 Received message from Master: op=Filter serial=112408 04:49:10 Color wheel filter change from 0 to 0 04:49:10 FLIGetFilterPos err=0 currentPosition=0 04:49:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:49:10 Filter is already there-color wheel unchanged 04:49:10 Received message from Master: op=Shutter serial=112409 04:49:10 Shutter LASER open 04:49:11 Received message from Camera: op=State serial=112411 04:49:11 GetSingleValue result=40 Value=cccccccc 04:49:11 SkyScan query 04:49:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:49:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:11 Parameters OK 04:49:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:11 Set A/D data flow result=40 04:49:11 Set A/D channel type result=40 04:49:11 Set A/D encoding result=40 04:49:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:11 Set channel filter=0.000000e+000 result=40 04:49:11 Config A/D Result=40 04:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:11 Get A/D filter: -9.255963e+061 result=40 04:49:11 Get A/D value=-858993460 result=40 04:49:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:11 Parameters OK 04:49:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:11 Set A/D data flow result=40 04:49:11 Set A/D channel type result=40 04:49:11 Set A/D encoding result=40 04:49:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:11 Set channel filter=0.000000e+000 result=40 04:49:11 Config A/D Result=40 04:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:11 Get A/D filter: -9.255963e+061 result=40 04:49:11 Get A/D value=-858993460 result=40 04:49:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:49:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:49:11 Aux= 04:49:11 Message to Camera, serial 112411 queued 04:49:20 Received message from Master: op=Shutter serial=112421 04:49:20 Shutter LASER close 04:49:20 Received message from Master: op=PointingHead serial=112425 04:49:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:49:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:49:21 Point started: ret=0 04:49:21 point_skyscan result=0 04:49:21 Check angles 04:49:21 SkyScan query 04:49:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.475<-21565 Statuses=0008 0009 04:49:22 Msec=0 True Az=112.995 Ze=-143.475 Az status=0008 Ze status=0009 04:49:22 Check angles 04:49:22 SkyScan query 04:49:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 04:49:23 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 04:49:23 Check angles 04:49:23 SkyScan query 04:49:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.575<-18705 Statuses=0008 0009 04:49:23 Msec=1500 True Az=112.995 Ze=-100.575 Az status=0008 Ze status=0009 04:49:24 Check angles 04:49:24 SkyScan query 04:49:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.71<-17314 Statuses=0008 0009 04:49:24 Msec=2250 True Az=112.995 Ze=-79.71 Az status=0008 Ze status=0009 04:49:24 Check angles 04:49:24 SkyScan query 04:49:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.77<-15918 Statuses=0008 0009 04:49:25 Msec=3000 True Az=112.995 Ze=-58.77 Az status=0008 Ze status=0009 04:49:25 Check angles 04:49:25 SkyScan query 04:49:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.8<-14520 Statuses=0008 0009 04:49:26 Msec=3750 True Az=112.995 Ze=-37.8 Az status=0008 Ze status=0009 04:49:26 Check angles 04:49:26 SkyScan query 04:49:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.845<-13123 Statuses=0008 0009 04:49:26 Msec=4500 True Az=112.995 Ze=-16.845 Az status=0008 Ze status=0009 04:49:27 Check angles 04:49:27 SkyScan query 04:49:27 SkyScan query done: ret=0 az=112.995<-7533 ze=4.095<-11727 Statuses=0008 0009 04:49:27 Msec=5250 True Az=112.995 Ze=4.095 Az status=0008 Ze status=0009 04:49:27 Check angles 04:49:27 SkyScan query 04:49:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:49:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:49:28 Message to Master queued w/err=0: serial=112425 error=0 04:49:33 Received message from Master: op=Filter serial=112426 04:49:33 Color wheel filter change from 0 to 0 04:49:33 FLIGetFilterPos err=0 currentPosition=0 04:49:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:49:33 Filter is already there-color wheel unchanged 04:49:33 Received message from Master: op=Shutter serial=112427 04:49:33 Shutter LASER close 04:49:33 Received message from Camera: op=State serial=112429 04:49:33 GetSingleValue result=40 Value=cccccccc 04:49:33 SkyScan query 04:49:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:49:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:34 Parameters OK 04:49:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:34 Set A/D data flow result=40 04:49:34 Set A/D channel type result=40 04:49:34 Set A/D encoding result=40 04:49:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:34 Set channel filter=0.000000e+000 result=40 04:49:34 Config A/D Result=40 04:49:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:34 Get A/D filter: -9.255963e+061 result=40 04:49:34 Get A/D value=-858993460 result=40 04:49:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:34 Parameters OK 04:49:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:34 Set A/D data flow result=40 04:49:34 Set A/D channel type result=40 04:49:34 Set A/D encoding result=40 04:49:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:34 Set channel filter=0.000000e+000 result=40 04:49:34 Config A/D Result=40 04:49:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:34 Get A/D filter: -9.255963e+061 result=40 04:49:34 Get A/D value=-858993460 result=40 04:49:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:49:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:49:34 Aux= 04:49:34 Message to Camera, serial 112429 queued 04:50:11 Received message from Master: op=PointingHead serial=112442 04:50:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:50:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:50:11 Point started: ret=0 04:50:11 point_skyscan result=0 04:50:12 Check angles 04:50:12 SkyScan query 04:50:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:50:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:50:12 Message to Master queued w/err=0: serial=112442 error=0 04:50:17 Received message from Master: op=Filter serial=112443 04:50:17 Color wheel filter change from 0 to 0 04:50:17 FLIGetFilterPos err=0 currentPosition=0 04:50:17 FLIGetStepsRemaining err=0 RemainingSteps=0 04:50:17 Filter is already there-color wheel unchanged 04:50:17 Received message from Master: op=Shutter serial=112444 04:50:17 Shutter LASER close 04:50:18 Received message from Camera: op=State serial=112446 04:50:18 GetSingleValue result=40 Value=cccccccc 04:50:18 SkyScan query 04:50:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:50:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:18 Parameters OK 04:50:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:18 Set A/D data flow result=40 04:50:18 Set A/D channel type result=40 04:50:18 Set A/D encoding result=40 04:50:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:18 Set channel filter=0.000000e+000 result=40 04:50:18 Config A/D Result=40 04:50:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:18 Get A/D filter: -9.255963e+061 result=40 04:50:18 Get A/D value=-858993460 result=40 04:50:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:18 Parameters OK 04:50:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:18 Set A/D data flow result=40 04:50:18 Set A/D channel type result=40 04:50:18 Set A/D encoding result=40 04:50:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:18 Set channel filter=0.000000e+000 result=40 04:50:18 Config A/D Result=40 04:50:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:18 Get A/D filter: -9.255963e+061 result=40 04:50:18 Get A/D value=-858993460 result=40 04:50:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:50:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:50:18 Aux= 04:50:18 Message to Camera, serial 112446 queued 04:50:55 Received message from Master: op=PointingHead serial=112459 04:50:55 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:50:55 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:50:55 Point started: ret=0 04:50:55 point_skyscan result=0 04:50:56 Check angles 04:50:56 SkyScan query 04:50:57 SkyScan query done: ret=0 az=136.455<-9097 ze=-6.51<-12434 Statuses=0009 0008 04:50:57 Msec=0 True Az=136.455 Ze=-6.51 Az status=0009 Ze status=0008 04:50:57 Check angles 04:50:57 SkyScan query 04:50:57 SkyScan query done: ret=0 az=153.825<-10255 ze=-6.495<-12433 Statuses=0009 0008 04:50:57 Msec=750 True Az=153.825 Ze=-6.495 Az status=0009 Ze status=0008 04:50:58 Check angles 04:50:58 SkyScan query 04:50:58 SkyScan query done: ret=0 az=171.36<-11424 ze=-6.495<-12433 Statuses=0009 0008 04:50:58 Msec=1500 True Az=171.36 Ze=-6.495 Az status=0009 Ze status=0008 04:50:58 Check angles 04:50:58 SkyScan query 04:50:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:50:59 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:50:59 Message to Master queued w/err=0: serial=112459 error=0 04:51:04 Received message from Master: op=Filter serial=112460 04:51:04 Color wheel filter change from 0 to 0 04:51:04 FLIGetFilterPos err=0 currentPosition=0 04:51:04 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:04 Filter is already there-color wheel unchanged 04:51:04 Received message from Master: op=Shutter serial=112461 04:51:04 Shutter LASER close 04:51:04 Received message from Camera: op=State serial=112463 04:51:04 GetSingleValue result=40 Value=cccccccc 04:51:04 SkyScan query 04:51:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:51:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:05 Parameters OK 04:51:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:05 Set A/D data flow result=40 04:51:05 Set A/D channel type result=40 04:51:05 Set A/D encoding result=40 04:51:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:05 Set channel filter=0.000000e+000 result=40 04:51:05 Config A/D Result=40 04:51:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:05 Get A/D filter: -9.255963e+061 result=40 04:51:05 Get A/D value=-858993460 result=40 04:51:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:05 Parameters OK 04:51:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:05 Set A/D data flow result=40 04:51:05 Set A/D channel type result=40 04:51:05 Set A/D encoding result=40 04:51:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:05 Set channel filter=0.000000e+000 result=40 04:51:05 Config A/D Result=40 04:51:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:05 Get A/D filter: -9.255963e+061 result=40 04:51:05 Get A/D value=-858993460 result=40 04:51:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:05 Aux= 04:51:05 Message to Camera, serial 112463 queued 04:51:41 Received message from Master: op=PointingHead serial=112476 04:51:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:51:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:51:42 Point started: ret=0 04:51:42 point_skyscan result=0 04:51:43 Check angles 04:51:43 SkyScan query 04:51:43 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 04:51:43 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 04:51:43 Check angles 04:51:43 SkyScan query 04:51:44 SkyScan query done: ret=0 az=135.645<-9043 ze=6.495<-11567 Statuses=0009 0008 04:51:44 Msec=750 True Az=135.645 Ze=6.495 Az status=0009 Ze status=0008 04:51:44 Check angles 04:51:44 SkyScan query 04:51:45 SkyScan query done: ret=0 az=118.17<-7878 ze=6.495<-11567 Statuses=0009 0008 04:51:45 Msec=1500 True Az=118.17 Ze=6.495 Az status=0009 Ze status=0008 04:51:45 Check angles 04:51:45 SkyScan query 04:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:51:45 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:51:45 Message to Master queued w/err=0: serial=112476 error=0 04:51:50 Received message from Master: op=Filter serial=112477 04:51:50 Color wheel filter change from 0 to 0 04:51:50 FLIGetFilterPos err=0 currentPosition=0 04:51:50 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:50 Filter is already there-color wheel unchanged 04:51:51 Received message from Master: op=Shutter serial=112478 04:51:51 Shutter LASER close 04:51:51 Received message from Camera: op=State serial=112480 04:51:51 GetSingleValue result=40 Value=cccccccc 04:51:51 SkyScan query 04:51:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:51:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:51 Parameters OK 04:51:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:51 Set A/D data flow result=40 04:51:51 Set A/D channel type result=40 04:51:51 Set A/D encoding result=40 04:51:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:51 Set channel filter=0.000000e+000 result=40 04:51:51 Config A/D Result=40 04:51:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:51 Get A/D filter: -9.255963e+061 result=40 04:51:51 Get A/D value=-858993460 result=40 04:51:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:51 Parameters OK 04:51:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:51 Set A/D data flow result=40 04:51:51 Set A/D channel type result=40 04:51:51 Set A/D encoding result=40 04:51:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:51 Set channel filter=0.000000e+000 result=40 04:51:51 Config A/D Result=40 04:51:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:51 Get A/D filter: -9.255963e+061 result=40 04:51:51 Get A/D value=-858993460 result=40 04:51:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:51 Aux= 04:51:51 Message to Camera, serial 112480 queued 04:52:28 Received message from Master: op=PointingHead serial=112493 04:52:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:52:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:52:28 Point started: ret=0 04:52:28 point_skyscan result=0 04:52:29 Check angles 04:52:29 SkyScan query 04:52:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 04:52:30 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 04:52:30 Check angles 04:52:30 SkyScan query 04:52:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.82<-14988 Statuses=0008 0009 04:52:30 Msec=750 True Az=112.995 Ze=-44.82 Az status=0008 Ze status=0009 04:52:31 Check angles 04:52:31 SkyScan query 04:52:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.21<-16414 Statuses=0008 0009 04:52:31 Msec=1500 True Az=112.995 Ze=-66.21 Az status=0008 Ze status=0009 04:52:31 Check angles 04:52:31 SkyScan query 04:52:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.15<-17810 Statuses=0008 0009 04:52:32 Msec=2250 True Az=112.995 Ze=-87.15 Az status=0008 Ze status=0009 04:52:32 Check angles 04:52:32 SkyScan query 04:52:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.12<-19208 Statuses=0008 0009 04:52:33 Msec=3000 True Az=112.995 Ze=-108.12 Az status=0008 Ze status=0009 04:52:33 Check angles 04:52:33 SkyScan query 04:52:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.06<-20604 Statuses=0008 0009 04:52:33 Msec=3750 True Az=112.995 Ze=-129.06 Az status=0008 Ze status=0009 04:52:34 Check angles 04:52:34 SkyScan query 04:52:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.015<-22001 Statuses=0008 0009 04:52:34 Msec=4500 True Az=112.995 Ze=-150.015 Az status=0008 Ze status=0009 04:52:34 Check angles 04:52:34 SkyScan query 04:52:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.21<-23414 Statuses=0008 0009 04:52:35 Msec=5250 True Az=112.995 Ze=-171.21 Az status=0008 Ze status=0009 04:52:35 Check angles 04:52:35 SkyScan query 04:52:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:52:36 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:52:36 Message to Master queued w/err=0: serial=112493 error=0 04:52:41 Received message from Master: op=Filter serial=112494 04:52:41 Color wheel filter change from 0 to 0 04:52:41 FLIGetFilterPos err=0 currentPosition=0 04:52:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:52:41 Filter is already there-color wheel unchanged 04:52:41 Received message from Master: op=Shutter serial=112495 04:52:41 Shutter LASER open 04:52:41 Received message from Camera: op=State serial=112497 04:52:41 GetSingleValue result=40 Value=cccccccc 04:52:41 SkyScan query 04:52:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:52:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:42 Parameters OK 04:52:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:42 Set A/D data flow result=40 04:52:42 Set A/D channel type result=40 04:52:42 Set A/D encoding result=40 04:52:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:42 Set channel filter=0.000000e+000 result=40 04:52:42 Config A/D Result=40 04:52:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:42 Get A/D filter: -9.255963e+061 result=40 04:52:42 Get A/D value=-858993460 result=40 04:52:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:42 Parameters OK 04:52:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:42 Set A/D data flow result=40 04:52:42 Set A/D channel type result=40 04:52:42 Set A/D encoding result=40 04:52:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:42 Set channel filter=0.000000e+000 result=40 04:52:42 Config A/D Result=40 04:52:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:42 Get A/D filter: -9.255963e+061 result=40 04:52:42 Get A/D value=-858993460 result=40 04:52:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:52:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:52:42 Aux= 04:52:42 Message to Camera, serial 112497 queued 04:52:50 Received message from Master: op=Shutter serial=112507 04:52:50 Shutter LASER close 04:52:51 Received message from Master: op=PointingHead serial=112511 04:52:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:52:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:52:51 Point started: ret=0 04:52:51 point_skyscan result=0 04:52:52 Check angles 04:52:52 SkyScan query 04:52:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 04:52:52 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 04:52:52 Check angles 04:52:52 SkyScan query 04:52:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 04:52:53 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 04:52:53 Check angles 04:52:53 SkyScan query 04:52:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.43<-18762 Statuses=0008 0009 04:52:54 Msec=1500 True Az=112.995 Ze=-101.43 Az status=0008 Ze status=0009 04:52:54 Check angles 04:52:54 SkyScan query 04:52:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.46<-17364 Statuses=0008 0009 04:52:54 Msec=2250 True Az=112.995 Ze=-80.46 Az status=0008 Ze status=0009 04:52:55 Check angles 04:52:55 SkyScan query 04:52:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.505<-15967 Statuses=0008 0009 04:52:55 Msec=3000 True Az=112.995 Ze=-59.505 Az status=0008 Ze status=0009 04:52:55 Check angles 04:52:55 SkyScan query 04:52:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.565<-14571 Statuses=0008 0009 04:52:56 Msec=3750 True Az=112.995 Ze=-38.565 Az status=0008 Ze status=0009 04:52:56 Check angles 04:52:56 SkyScan query 04:52:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.61<-13174 Statuses=0008 0009 04:52:57 Msec=4500 True Az=112.995 Ze=-17.61 Az status=0008 Ze status=0009 04:52:57 Check angles 04:52:57 SkyScan query 04:52:57 SkyScan query done: ret=0 az=112.995<-7533 ze=3.36<-11776 Statuses=0008 0009 04:52:57 Msec=5250 True Az=112.995 Ze=3.36 Az status=0008 Ze status=0009 04:52:58 Check angles 04:52:58 SkyScan query 04:52:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:52:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:52:58 Message to Master queued w/err=0: serial=112511 error=0 04:53:03 Received message from Master: op=Filter serial=112512 04:53:03 Color wheel filter change from 0 to 0 04:53:03 FLIGetFilterPos err=0 currentPosition=0 04:53:03 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:03 Filter is already there-color wheel unchanged 04:53:03 Received message from Master: op=Shutter serial=112513 04:53:03 Shutter LASER close 04:53:04 Received message from Camera: op=State serial=112515 04:53:04 GetSingleValue result=40 Value=cccccccc 04:53:04 SkyScan query 04:53:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:53:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:04 Parameters OK 04:53:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:04 Set A/D data flow result=40 04:53:04 Set A/D channel type result=40 04:53:04 Set A/D encoding result=40 04:53:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:04 Set channel filter=0.000000e+000 result=40 04:53:04 Config A/D Result=40 04:53:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:04 Get A/D filter: -9.255963e+061 result=40 04:53:04 Get A/D value=-858993460 result=40 04:53:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:04 Parameters OK 04:53:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:04 Set A/D data flow result=40 04:53:04 Set A/D channel type result=40 04:53:04 Set A/D encoding result=40 04:53:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:04 Set channel filter=0.000000e+000 result=40 04:53:04 Config A/D Result=40 04:53:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:04 Get A/D filter: -9.255963e+061 result=40 04:53:04 Get A/D value=-858993460 result=40 04:53:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:04 Aux= 04:53:04 Message to Camera, serial 112515 queued 04:53:41 Received message from Master: op=PointingHead serial=112528 04:53:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:53:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:53:41 Point started: ret=0 04:53:41 point_skyscan result=0 04:53:42 Check angles 04:53:42 SkyScan query 04:53:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:53:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:53:43 Message to Master queued w/err=0: serial=112528 error=0 04:53:48 Received message from Master: op=Filter serial=112529 04:53:48 Color wheel filter change from 0 to 0 04:53:48 FLIGetFilterPos err=0 currentPosition=0 04:53:48 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:48 Filter is already there-color wheel unchanged 04:53:48 Received message from Master: op=Shutter serial=112530 04:53:48 Shutter LASER close 04:53:48 Received message from Camera: op=State serial=112532 04:53:48 GetSingleValue result=40 Value=cccccccc 04:53:48 SkyScan query 04:53:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:53:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:48 Parameters OK 04:53:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:48 Set A/D data flow result=40 04:53:48 Set A/D channel type result=40 04:53:48 Set A/D encoding result=40 04:53:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:48 Set channel filter=0.000000e+000 result=40 04:53:48 Config A/D Result=40 04:53:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:48 Get A/D filter: -9.255963e+061 result=40 04:53:48 Get A/D value=-858993460 result=40 04:53:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:48 Parameters OK 04:53:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:48 Set A/D data flow result=40 04:53:48 Set A/D channel type result=40 [UTC 2019-3-5 04:53:48] 04:53:48 Set A/D encoding result=40 04:53:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:48 Set channel filter=0.000000e+000 result=40 04:53:48 Config A/D Result=40 04:53:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:48 Get A/D filter: -9.255963e+061 result=40 04:53:48 Get A/D value=-858993460 result=40 04:53:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:48 Aux= 04:53:48 Message to Camera, serial 112532 queued 04:54:24 Received message from Master: op=PointingHead serial=112544 04:54:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:54:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:54:25 Point started: ret=0 04:54:25 point_skyscan result=0 04:54:25 Check angles 04:54:25 SkyScan query 04:54:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:54:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:54:26 Message to Master queued w/err=0: serial=112544 error=0 04:54:31 Received message from Master: op=Filter serial=112545 04:54:31 Color wheel filter change from 0 to 0 04:54:31 FLIGetFilterPos err=0 currentPosition=0 04:54:31 FLIGetStepsRemaining err=0 RemainingSteps=0 04:54:31 Filter is already there-color wheel unchanged 04:54:31 Received message from Master: op=Shutter serial=112546 04:54:31 Shutter LASER close 04:54:31 Received message from Camera: op=State serial=112548 04:54:31 GetSingleValue result=40 Value=cccccccc 04:54:31 SkyScan query 04:54:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:54:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:32 Parameters OK 04:54:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:32 Set A/D data flow result=40 04:54:32 Set A/D channel type result=40 04:54:32 Set A/D encoding result=40 04:54:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:32 Set channel filter=0.000000e+000 result=40 04:54:32 Config A/D Result=40 04:54:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:32 Get A/D filter: -9.255963e+061 result=40 04:54:32 Get A/D value=-858993460 result=40 04:54:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:32 Parameters OK 04:54:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:32 Set A/D data flow result=40 04:54:32 Set A/D channel type result=40 04:54:32 Set A/D encoding result=40 04:54:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:32 Set channel filter=0.000000e+000 result=40 04:54:32 Config A/D Result=40 04:54:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:32 Get A/D filter: -9.255963e+061 result=40 04:54:32 Get A/D value=-858993460 result=40 04:54:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:54:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:54:32 Aux= 04:54:32 Message to Camera, serial 112548 queued 04:55:09 Received message from Master: op=PointingHead serial=112561 04:55:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:55:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:55:09 Point started: ret=0 04:55:09 point_skyscan result=0 04:55:10 Check angles 04:55:10 SkyScan query 04:55:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:55:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:55:10 Message to Master queued w/err=0: serial=112561 error=0 04:55:15 Received message from Master: op=Filter serial=112562 04:55:15 Color wheel filter change from 0 to 0 04:55:15 FLIGetFilterPos err=0 currentPosition=0 04:55:15 FLIGetStepsRemaining err=0 RemainingSteps=0 04:55:15 Filter is already there-color wheel unchanged 04:55:15 Received message from Master: op=Shutter serial=112563 04:55:15 Shutter LASER close 04:55:15 Received message from Camera: op=State serial=112565 04:55:15 GetSingleValue result=40 Value=cccccccc 04:55:15 SkyScan query 04:55:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:55:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:16 Parameters OK 04:55:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:16 Set A/D data flow result=40 04:55:16 Set A/D channel type result=40 04:55:16 Set A/D encoding result=40 04:55:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:16 Set channel filter=0.000000e+000 result=40 04:55:16 Config A/D Result=40 04:55:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:16 Get A/D filter: -9.255963e+061 result=40 04:55:16 Get A/D value=-858993460 result=40 04:55:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:16 Parameters OK 04:55:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:16 Set A/D data flow result=40 04:55:16 Set A/D channel type result=40 04:55:16 Set A/D encoding result=40 04:55:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:16 Set channel filter=0.000000e+000 result=40 04:55:16 Config A/D Result=40 04:55:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:16 Get A/D filter: -9.255963e+061 result=40 04:55:16 Get A/D value=-858993460 result=40 04:55:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:55:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:55:16 Aux= 04:55:16 Message to Camera, serial 112565 queued 04:55:53 Received message from Master: op=PointingHead serial=112578 04:55:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:55:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:55:53 Point started: ret=0 04:55:53 point_skyscan result=0 04:55:54 Check angles 04:55:54 SkyScan query 04:55:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.13<-13542 Statuses=0008 0009 04:55:55 Msec=0 True Az=112.995 Ze=-23.13 Az status=0008 Ze status=0009 04:55:55 Check angles 04:55:55 SkyScan query 04:55:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 04:55:55 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 04:55:55 Check angles 04:55:55 SkyScan query 04:55:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 04:55:56 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 04:55:56 Check angles 04:55:56 SkyScan query 04:55:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.46<-17764 Statuses=0008 0009 04:55:57 Msec=2250 True Az=112.995 Ze=-86.46 Az status=0008 Ze status=0009 04:55:57 Check angles 04:55:57 SkyScan query 04:55:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 04:55:58 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 04:55:58 Check angles 04:55:58 SkyScan query 04:55:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.355<-20557 Statuses=0008 0009 04:55:58 Msec=3750 True Az=112.995 Ze=-128.355 Az status=0008 Ze status=0009 04:55:58 Check angles 04:55:58 SkyScan query 04:55:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.325<-21955 Statuses=0008 0009 04:55:59 Msec=4500 True Az=112.995 Ze=-149.325 Az status=0008 Ze status=0009 04:55:59 Check angles 04:55:59 SkyScan query 04:56:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.265<-23351 Statuses=0008 0009 04:56:00 Msec=5250 True Az=112.995 Ze=-170.265 Az status=0008 Ze status=0009 04:56:00 Check angles 04:56:00 SkyScan query 04:56:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:56:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:56:01 Message to Master queued w/err=0: serial=112578 error=0 04:56:06 Received message from Master: op=Filter serial=112579 04:56:06 Color wheel filter change from 0 to 0 04:56:06 FLIGetFilterPos err=0 currentPosition=0 04:56:06 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:06 Filter is already there-color wheel unchanged 04:56:06 Received message from Master: op=Shutter serial=112580 04:56:06 Shutter LASER open 04:56:06 Received message from Camera: op=State serial=112582 04:56:06 GetSingleValue result=40 Value=cccccccc 04:56:06 SkyScan query 04:56:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:56:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:06 Parameters OK 04:56:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:06 Set A/D data flow result=40 04:56:06 Set A/D channel type result=40 04:56:06 Set A/D encoding result=40 04:56:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:06 Set channel filter=0.000000e+000 result=40 04:56:06 Config A/D Result=40 04:56:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:06 Get A/D filter: -9.255963e+061 result=40 04:56:06 Get A/D value=-858993460 result=40 04:56:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:06 Parameters OK 04:56:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:06 Set A/D data flow result=40 04:56:06 Set A/D channel type result=40 04:56:06 Set A/D encoding result=40 04:56:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:06 Set channel filter=0.000000e+000 result=40 04:56:06 Config A/D Result=40 04:56:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:06 Get A/D filter: -9.255963e+061 result=40 04:56:06 Get A/D value=-858993460 result=40 04:56:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:06 Aux= 04:56:06 Message to Camera, serial 112582 queued 04:56:15 Received message from Master: op=Shutter serial=112592 04:56:15 Shutter LASER close 04:56:16 Received message from Master: op=PointingHead serial=112596 04:56:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:56:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:56:16 Point started: ret=0 04:56:16 point_skyscan result=0 04:56:17 Check angles 04:56:17 SkyScan query 04:56:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 04:56:17 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 04:56:17 Check angles 04:56:17 SkyScan query 04:56:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.28<-20152 Statuses=0008 0009 04:56:18 Msec=750 True Az=112.995 Ze=-122.28 Az status=0008 Ze status=0009 04:56:18 Check angles 04:56:18 SkyScan query 04:56:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.34<-18756 Statuses=0008 0009 04:56:19 Msec=1500 True Az=112.995 Ze=-101.34 Az status=0008 Ze status=0009 04:56:19 Check angles 04:56:19 SkyScan query 04:56:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.37<-17358 Statuses=0008 0009 04:56:19 Msec=2250 True Az=112.995 Ze=-80.37 Az status=0008 Ze status=0009 04:56:20 Check angles 04:56:20 SkyScan query 04:56:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.445<-15963 Statuses=0008 0009 04:56:20 Msec=3000 True Az=112.995 Ze=-59.445 Az status=0008 Ze status=0009 04:56:20 Check angles 04:56:20 SkyScan query 04:56:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.46<-14564 Statuses=0008 0009 04:56:21 Msec=3750 True Az=112.995 Ze=-38.46 Az status=0008 Ze status=0009 04:56:21 Check angles 04:56:21 SkyScan query 04:56:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.505<-13167 Statuses=0008 0009 04:56:22 Msec=4500 True Az=112.995 Ze=-17.505 Az status=0008 Ze status=0009 04:56:22 Check angles 04:56:22 SkyScan query 04:56:22 SkyScan query done: ret=0 az=112.995<-7533 ze=3.45<-11770 Statuses=0008 0009 04:56:22 Msec=5250 True Az=112.995 Ze=3.45 Az status=0008 Ze status=0009 04:56:23 Check angles 04:56:23 SkyScan query 04:56:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:56:23 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:56:23 Message to Master queued w/err=0: serial=112596 error=0 04:56:28 Received message from Master: op=Filter serial=112597 04:56:28 Color wheel filter change from 0 to 0 04:56:28 FLIGetFilterPos err=0 currentPosition=0 04:56:28 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:28 Filter is already there-color wheel unchanged 04:56:28 Received message from Master: op=Shutter serial=112598 04:56:28 Shutter LASER close 04:56:29 Received message from Camera: op=State serial=112600 04:56:29 GetSingleValue result=40 Value=cccccccc 04:56:29 SkyScan query 04:56:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:56:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:29 Parameters OK 04:56:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:29 Set A/D data flow result=40 04:56:29 Set A/D channel type result=40 04:56:29 Set A/D encoding result=40 04:56:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:29 Set channel filter=0.000000e+000 result=40 04:56:29 Config A/D Result=40 04:56:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:29 Get A/D filter: -9.255963e+061 result=40 04:56:29 Get A/D value=-858993460 result=40 04:56:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:29 Parameters OK 04:56:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:29 Set A/D data flow result=40 04:56:29 Set A/D channel type result=40 04:56:29 Set A/D encoding result=40 04:56:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:29 Set channel filter=0.000000e+000 result=40 04:56:29 Config A/D Result=40 04:56:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:29 Get A/D filter: -9.255963e+061 result=40 04:56:29 Get A/D value=-858993460 result=40 04:56:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:29 Aux= 04:56:29 Message to Camera, serial 112600 queued 04:57:06 Received message from Master: op=PointingHead serial=112613 04:57:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:57:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:57:06 Point started: ret=0 04:57:06 point_skyscan result=0 04:57:07 Check angles 04:57:07 SkyScan query 04:57:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:57:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:57:08 Message to Master queued w/err=0: serial=112613 error=0 04:57:13 Received message from Master: op=Filter serial=112614 04:57:13 Color wheel filter change from 0 to 0 04:57:13 FLIGetFilterPos err=0 currentPosition=0 04:57:13 FLIGetStepsRemaining err=0 RemainingSteps=0 04:57:13 Filter is already there-color wheel unchanged 04:57:13 Received message from Master: op=Shutter serial=112615 04:57:13 Shutter LASER close 04:57:13 Received message from Camera: op=State serial=112617 04:57:13 GetSingleValue result=40 Value=cccccccc 04:57:13 SkyScan query 04:57:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:57:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:13 Parameters OK 04:57:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:13 Set A/D data flow result=40 04:57:13 Set A/D channel type result=40 04:57:13 Set A/D encoding result=40 04:57:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:13 Set channel filter=0.000000e+000 result=40 04:57:13 Config A/D Result=40 04:57:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:13 Get A/D filter: -9.255963e+061 result=40 04:57:13 Get A/D value=-858993460 result=40 04:57:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:13 Parameters OK 04:57:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:13 Set A/D data flow result=40 04:57:13 Set A/D channel type result=40 04:57:13 Set A/D encoding result=40 04:57:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:13 Set channel filter=0.000000e+000 result=40 04:57:13 Config A/D Result=40 04:57:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:13 Get A/D filter: -9.255963e+061 result=40 04:57:13 Get A/D value=-858993460 result=40 04:57:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:57:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:57:13 Aux= 04:57:13 Message to Camera, serial 112617 queued 04:57:49 Received message from Master: op=PointingHead serial=112629 04:57:49 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:57:49 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:57:50 Point started: ret=0 04:57:50 point_skyscan result=0 04:57:50 Check angles 04:57:50 SkyScan query 04:57:51 SkyScan query done: ret=0 az=136.17<-9078 ze=-6.51<-12434 Statuses=0009 0008 04:57:51 Msec=0 True Az=136.17 Ze=-6.51 Az status=0009 Ze status=0008 04:57:51 Check angles 04:57:51 SkyScan query 04:57:52 SkyScan query done: ret=0 az=153.735<-10249 ze=-6.495<-12433 Statuses=0009 0008 04:57:52 Msec=750 True Az=153.735 Ze=-6.495 Az status=0009 Ze status=0008 04:57:52 Check angles 04:57:52 SkyScan query 04:57:52 SkyScan query done: ret=0 az=171.105<-11407 ze=-6.495<-12433 Statuses=0009 0008 04:57:52 Msec=1500 True Az=171.105 Ze=-6.495 Az status=0009 Ze status=0008 04:57:53 Check angles 04:57:53 SkyScan query 04:57:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:57:53 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:57:53 Message to Master queued w/err=0: serial=112629 error=0 04:57:58 Received message from Master: op=Filter serial=112630 04:57:58 Color wheel filter change from 0 to 0 04:57:58 FLIGetFilterPos err=0 currentPosition=0 04:57:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:57:58 Filter is already there-color wheel unchanged 04:57:58 Received message from Master: op=Shutter serial=112631 04:57:58 Shutter LASER close 04:57:58 Received message from Camera: op=State serial=112633 04:57:58 GetSingleValue result=40 Value=cccccccc 04:57:58 SkyScan query 04:57:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:57:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:59 Parameters OK 04:57:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:59 Set A/D data flow result=40 04:57:59 Set A/D channel type result=40 04:57:59 Set A/D encoding result=40 04:57:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:59 Set channel filter=0.000000e+000 result=40 04:57:59 Config A/D Result=40 04:57:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:59 Get A/D filter: -9.255963e+061 result=40 04:57:59 Get A/D value=-858993460 result=40 04:57:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:59 Parameters OK 04:57:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:59 Set A/D data flow result=40 04:57:59 Set A/D channel type result=40 04:57:59 Set A/D encoding result=40 04:57:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:59 Set channel filter=0.000000e+000 result=40 04:57:59 Config A/D Result=40 04:57:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:59 Get A/D filter: -9.255963e+061 result=40 04:57:59 Get A/D value=-858993460 result=40 04:57:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:57:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:57:59 Aux= 04:57:59 Message to Camera, serial 112633 queued 04:58:36 Received message from Master: op=PointingHead serial=112646 04:58:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:58:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:58:36 Point started: ret=0 04:58:36 point_skyscan result=0 04:58:37 Check angles 04:58:37 SkyScan query 04:58:37 SkyScan query done: ret=0 az=152.85<-10190 ze=6.51<-11566 Statuses=0009 0008 04:58:37 Msec=0 True Az=152.85 Ze=6.51 Az status=0009 Ze status=0008 04:58:38 Check angles 04:58:38 SkyScan query 04:58:38 SkyScan query done: ret=0 az=135.375<-9025 ze=6.495<-11567 Statuses=0009 0008 04:58:38 Msec=750 True Az=135.375 Ze=6.495 Az status=0009 Ze status=0008 04:58:38 Check angles 04:58:38 SkyScan query 04:58:39 SkyScan query done: ret=0 az=117.6<-7840 ze=6.495<-11567 Statuses=0009 0008 04:58:39 Msec=1500 True Az=117.6 Ze=6.495 Az status=0009 Ze status=0008 04:58:39 Check angles 04:58:39 SkyScan query 04:58:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:58:40 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:58:40 Message to Master queued w/err=0: serial=112646 error=0 04:58:45 Received message from Master: op=Filter serial=112647 04:58:45 Color wheel filter change from 0 to 0 04:58:45 FLIGetFilterPos err=0 currentPosition=0 04:58:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:45 Filter is already there-color wheel unchanged 04:58:45 Received message from Master: op=Shutter serial=112648 04:58:45 Shutter LASER close 04:58:45 Received message from Camera: op=State serial=112650 04:58:45 GetSingleValue result=40 Value=cccccccc 04:58:45 SkyScan query 04:58:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:58:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:46 Parameters OK 04:58:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:46 Set A/D data flow result=40 04:58:46 Set A/D channel type result=40 04:58:46 Set A/D encoding result=40 04:58:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:46 Set channel filter=0.000000e+000 result=40 04:58:46 Config A/D Result=40 04:58:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:46 Get A/D filter: -9.255963e+061 result=40 04:58:46 Get A/D value=-858993460 result=40 04:58:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:46 Parameters OK 04:58:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:46 Set A/D data flow result=40 04:58:46 Set A/D channel type result=40 04:58:46 Set A/D encoding result=40 04:58:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:46 Set channel filter=0.000000e+000 result=40 04:58:46 Config A/D Result=40 04:58:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:46 Get A/D filter: -9.255963e+061 result=40 04:58:46 Get A/D value=-858993460 result=40 04:58:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:46 Aux= 04:58:46 Message to Camera, serial 112650 queued 04:59:22 Received message from Master: op=PointingHead serial=112663 04:59:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:59:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:59:23 Point started: ret=0 04:59:23 point_skyscan result=0 04:59:24 Check angles 04:59:24 SkyScan query 04:59:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 04:59:24 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 04:59:24 Check angles 04:59:24 SkyScan query 04:59:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.205<-14947 Statuses=0008 0009 04:59:25 Msec=750 True Az=112.995 Ze=-44.205 Az status=0008 Ze status=0009 04:59:25 Check angles 04:59:25 SkyScan query 04:59:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.13<-16342 Statuses=0008 0009 04:59:26 Msec=1500 True Az=112.995 Ze=-65.13 Az status=0008 Ze status=0009 04:59:26 Check angles 04:59:26 SkyScan query 04:59:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.1<-17740 Statuses=0008 0009 04:59:26 Msec=2250 True Az=112.995 Ze=-86.1 Az status=0008 Ze status=0009 04:59:27 Check angles 04:59:27 SkyScan query 04:59:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.04<-19136 Statuses=0008 0009 04:59:27 Msec=3000 True Az=112.995 Ze=-107.04 Az status=0008 Ze status=0009 04:59:27 Check angles 04:59:27 SkyScan query 04:59:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.995<-20533 Statuses=0008 0009 04:59:28 Msec=3750 True Az=112.995 Ze=-127.995 Az status=0008 Ze status=0009 04:59:28 Check angles 04:59:28 SkyScan query 04:59:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.95<-21930 Statuses=0008 0009 04:59:29 Msec=4500 True Az=112.995 Ze=-148.95 Az status=0008 Ze status=0009 04:59:29 Check angles 04:59:29 SkyScan query 04:59:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.325<-23355 Statuses=0008 0009 04:59:29 Msec=5250 True Az=112.995 Ze=-170.325 Az status=0008 Ze status=0009 04:59:30 Check angles 04:59:30 SkyScan query 04:59:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:59:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:59:30 Message to Master queued w/err=0: serial=112663 error=0 04:59:35 Received message from Master: op=Filter serial=112664 04:59:35 Color wheel filter change from 0 to 0 04:59:35 FLIGetFilterPos err=0 currentPosition=0 04:59:35 FLIGetStepsRemaining err=0 RemainingSteps=0 04:59:35 Filter is already there-color wheel unchanged 04:59:35 Received message from Master: op=Shutter serial=112665 04:59:35 Shutter LASER open 04:59:35 Received message from Camera: op=State serial=112667 04:59:35 GetSingleValue result=40 Value=cccccccc 04:59:35 SkyScan query 04:59:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:59:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:36 Parameters OK 04:59:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:36 Set A/D data flow result=40 04:59:36 Set A/D channel type result=40 04:59:36 Set A/D encoding result=40 04:59:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:36 Set channel filter=0.000000e+000 result=40 04:59:36 Config A/D Result=40 04:59:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:36 Get A/D filter: -9.255963e+061 result=40 04:59:36 Get A/D value=-858993460 result=40 04:59:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:36 Parameters OK 04:59:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:36 Set A/D data flow result=40 04:59:36 Set A/D channel type result=40 04:59:36 Set A/D encoding result=40 04:59:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:36 Set channel filter=0.000000e+000 result=40 04:59:36 Config A/D Result=40 04:59:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:36 Get A/D filter: -9.255963e+061 result=40 04:59:36 Get A/D value=-858993460 result=40 04:59:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:59:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:59:36 Aux= 04:59:36 Message to Camera, serial 112667 queued 04:59:44 Received message from Master: op=Shutter serial=112677 04:59:44 Shutter LASER close 04:59:45 Received message from Master: op=PointingHead serial=112681 04:59:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:59:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:59:45 Point started: ret=0 04:59:45 point_skyscan result=0 04:59:46 Check angles 04:59:46 SkyScan query 04:59:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 04:59:47 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 04:59:47 Check angles 04:59:47 SkyScan query 04:59:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 04:59:47 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 04:59:47 Check angles 04:59:47 SkyScan query 04:59:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.535<-18769 Statuses=0008 0009 04:59:48 Msec=1500 True Az=112.995 Ze=-101.535 Az status=0008 Ze status=0009 04:59:48 Check angles 04:59:48 SkyScan query 04:59:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.58<-17372 Statuses=0008 0009 04:59:49 Msec=2250 True Az=112.995 Ze=-80.58 Az status=0008 Ze status=0009 04:59:49 Check angles 04:59:49 SkyScan query 04:59:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.625<-15975 Statuses=0008 0009 04:59:50 Msec=3000 True Az=112.995 Ze=-59.625 Az status=0008 Ze status=0009 04:59:50 Check angles 04:59:50 SkyScan query 04:59:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.685<-14579 Statuses=0008 0009 04:59:50 Msec=3750 True Az=112.995 Ze=-38.685 Az status=0008 Ze status=0009 04:59:50 Check angles 04:59:50 SkyScan query 04:59:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.715<-13181 Statuses=0008 0009 04:59:51 Msec=4500 True Az=112.995 Ze=-17.715 Az status=0008 Ze status=0009 04:59:51 Check angles 04:59:51 SkyScan query 04:59:52 SkyScan query done: ret=0 az=112.995<-7533 ze=3.225<-11785 Statuses=0008 0009 04:59:52 Msec=5250 True Az=112.995 Ze=3.225 Az status=0008 Ze status=0009 04:59:52 Check angles 04:59:52 SkyScan query 04:59:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:59:53 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:59:53 Message to Master queued w/err=0: serial=112681 error=0 04:59:58 Received message from Master: op=Filter serial=112682 04:59:58 Color wheel filter change from 0 to 0 04:59:58 FLIGetFilterPos err=0 currentPosition=0 04:59:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:59:58 Filter is already there-color wheel unchanged 04:59:58 Received message from Master: op=Shutter serial=112683 04:59:58 Shutter LASER close 04:59:58 Received message from Camera: op=State serial=112685 04:59:58 GetSingleValue result=40 Value=cccccccc 04:59:58 SkyScan query 04:59:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:59:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:58 Parameters OK 04:59:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:58 Set A/D data flow result=40 04:59:58 Set A/D channel type result=40 04:59:58 Set A/D encoding result=40 04:59:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:58 Set channel filter=0.000000e+000 result=40 04:59:58 Config A/D Result=40 04:59:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:58 Get A/D filter: -9.255963e+061 result=40 04:59:58 Get A/D value=-858993460 result=40 04:59:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:58 Parameters OK 04:59:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:58 Set A/D data flow result=40 04:59:58 Set A/D channel type result=40 04:59:58 Set A/D encoding result=40 04:59:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:58 Set channel filter=0.000000e+000 result=40 04:59:58 Config A/D Result=40 04:59:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:58 Get A/D filter: -9.255963e+061 result=40 04:59:58 Get A/D value=-858993460 result=40 04:59:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:59:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:59:58 Aux= 04:59:58 Message to Camera, serial 112685 queued 05:00:35 Received message from Master: op=PointingHead serial=112698 05:00:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:00:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:00:36 Point started: ret=0 05:00:36 point_skyscan result=0 05:00:36 Check angles 05:00:36 SkyScan query 05:00:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:00:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:00:37 Message to Master queued w/err=0: serial=112698 error=0 05:00:42 Received message from Master: op=Filter serial=112699 05:00:42 Color wheel filter change from 0 to 0 05:00:42 FLIGetFilterPos err=0 currentPosition=0 05:00:42 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:42 Filter is already there-color wheel unchanged 05:00:42 Received message from Master: op=Shutter serial=112700 05:00:42 Shutter LASER close 05:00:42 Received message from Camera: op=State serial=112702 05:00:42 GetSingleValue result=40 Value=cccccccc 05:00:42 SkyScan query 05:00:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:00:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:43 Parameters OK 05:00:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:43 Set A/D data flow result=40 05:00:43 Set A/D channel type result=40 05:00:43 Set A/D encoding result=40 05:00:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:43 Set channel filter=0.000000e+000 result=40 05:00:43 Config A/D Result=40 05:00:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:43 Get A/D filter: -9.255963e+061 result=40 05:00:43 Get A/D value=-858993460 result=40 05:00:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:43 Parameters OK 05:00:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:43 Set A/D data flow result=40 05:00:43 Set A/D channel type result=40 05:00:43 Set A/D encoding result=40 05:00:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:43 Set channel filter=0.000000e+000 result=40 05:00:43 Config A/D Result=40 05:00:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:43 Get A/D filter: -9.255963e+061 result=40 05:00:43 Get A/D value=-858993460 result=40 05:00:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:43 Aux= 05:00:43 Message to Camera, serial 112702 queued 05:01:20 Received message from Master: op=PointingHead serial=112715 05:01:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:01:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:01:20 Point started: ret=0 05:01:20 point_skyscan result=0 05:01:21 Check angles 05:01:21 SkyScan query 05:01:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:01:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:01:21 Message to Master queued w/err=0: serial=112715 error=0 05:01:26 Received message from Master: op=Filter serial=112716 05:01:26 Color wheel filter change from 0 to 0 05:01:26 FLIGetFilterPos err=0 currentPosition=0 05:01:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:01:26 Filter is already there-color wheel unchanged 05:01:26 Received message from Master: op=Shutter serial=112717 05:01:26 Shutter LASER close 05:01:26 Received message from Camera: op=State serial=112719 05:01:26 GetSingleValue result=40 Value=cccccccc 05:01:26 SkyScan query 05:01:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:01:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:27 Parameters OK 05:01:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:27 Set A/D data flow result=40 05:01:27 Set A/D channel type result=40 05:01:27 Set A/D encoding result=40 05:01:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:27 Set channel filter=0.000000e+000 result=40 05:01:27 Config A/D Result=40 05:01:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:27 Get A/D filter: -9.255963e+061 result=40 05:01:27 Get A/D value=-858993460 result=40 05:01:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:27 Parameters OK 05:01:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:27 Set A/D data flow result=40 05:01:27 Set A/D channel type result=40 05:01:27 Set A/D encoding result=40 05:01:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:27 Set channel filter=0.000000e+000 result=40 05:01:27 Config A/D Result=40 05:01:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:27 Get A/D filter: -9.255963e+061 result=40 05:01:27 Get A/D value=-858993460 result=40 05:01:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:01:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:01:27 Aux= 05:01:27 Message to Camera, serial 112719 queued 05:02:04 Received message from Master: op=PointingHead serial=112732 05:02:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:02:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:02:04 Point started: ret=0 05:02:04 point_skyscan result=0 05:02:05 Check angles 05:02:05 SkyScan query 05:02:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:02:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:02:06 Message to Master queued w/err=0: serial=112732 error=0 05:02:11 Received message from Master: op=Filter serial=112733 05:02:11 Color wheel filter change from 0 to 0 05:02:11 FLIGetFilterPos err=0 currentPosition=0 05:02:11 FLIGetStepsRemaining err=0 RemainingSteps=0 05:02:11 Filter is already there-color wheel unchanged 05:02:11 Received message from Master: op=Shutter serial=112734 05:02:11 Shutter LASER close 05:02:11 Received message from Camera: op=State serial=112736 05:02:11 GetSingleValue result=40 Value=cccccccc 05:02:11 SkyScan query 05:02:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:02:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:11 Parameters OK 05:02:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:11 Set A/D data flow result=40 05:02:11 Set A/D channel type result=40 05:02:11 Set A/D encoding result=40 05:02:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:11 Set channel filter=0.000000e+000 result=40 05:02:11 Config A/D Result=40 05:02:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:11 Get A/D filter: -9.255963e+061 result=40 05:02:11 Get A/D value=-858993460 result=40 05:02:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:11 Parameters OK 05:02:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:11 Set A/D data flow result=40 05:02:11 Set A/D channel type result=40 05:02:11 Set A/D encoding result=40 05:02:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:11 Set channel filter=0.000000e+000 result=40 05:02:11 Config A/D Result=40 05:02:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:11 Get A/D filter: -9.255963e+061 result=40 05:02:11 Get A/D value=-858993460 result=40 05:02:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:02:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:02:11 Aux= 05:02:11 Message to Camera, serial 112736 queued 05:02:48 Received message from Master: op=PointingHead serial=112749 05:02:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:02:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:02:49 Point started: ret=0 05:02:49 point_skyscan result=0 05:02:49 Check angles 05:02:49 SkyScan query 05:02:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.73<-13582 Statuses=0008 0009 05:02:50 Msec=0 True Az=112.995 Ze=-23.73 Az status=0008 Ze status=0009 05:02:50 Check angles 05:02:50 SkyScan query 05:02:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 05:02:51 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 05:02:51 Check angles 05:02:51 SkyScan query 05:02:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.06<-16404 Statuses=0008 0009 05:02:51 Msec=1500 True Az=112.995 Ze=-66.06 Az status=0008 Ze status=0009 05:02:52 Check angles 05:02:52 SkyScan query 05:02:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.015<-17801 Statuses=0008 0009 05:02:52 Msec=2250 True Az=112.995 Ze=-87.015 Az status=0008 Ze status=0009 05:02:52 Check angles 05:02:52 SkyScan query 05:02:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.97<-19198 Statuses=0008 0009 05:02:53 Msec=3000 True Az=112.995 Ze=-107.97 Az status=0008 Ze status=0009 05:02:53 Check angles 05:02:53 SkyScan query 05:02:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.91<-20594 Statuses=0008 0009 05:02:54 Msec=3750 True Az=112.995 Ze=-128.91 Az status=0008 Ze status=0009 05:02:54 Check angles 05:02:54 SkyScan query 05:02:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.88<-21992 Statuses=0008 0009 05:02:54 Msec=4500 True Az=112.995 Ze=-149.88 Az status=0008 Ze status=0009 05:02:55 Check angles 05:02:55 SkyScan query 05:02:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.775<-23385 Statuses=0008 0009 05:02:55 Msec=5250 True Az=112.995 Ze=-170.775 Az status=0008 Ze status=0009 05:02:55 Check angles 05:02:55 SkyScan query 05:02:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:02:56 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:02:56 Message to Master queued w/err=0: serial=112749 error=0 05:03:01 Received message from Master: op=Filter serial=112750 05:03:01 Color wheel filter change from 0 to 0 05:03:01 FLIGetFilterPos err=0 currentPosition=0 05:03:01 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:01 Filter is already there-color wheel unchanged 05:03:01 Received message from Master: op=Shutter serial=112751 05:03:01 Shutter LASER open 05:03:01 Received message from Camera: op=State serial=112753 05:03:01 GetSingleValue result=40 Value=cccccccc 05:03:01 SkyScan query 05:03:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:03:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:02 Parameters OK 05:03:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:02 Set A/D data flow result=40 05:03:02 Set A/D channel type result=40 05:03:02 Set A/D encoding result=40 05:03:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:02 Set channel filter=0.000000e+000 result=40 05:03:02 Config A/D Result=40 05:03:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:02 Get A/D filter: -9.255963e+061 result=40 05:03:02 Get A/D value=-858993460 result=40 05:03:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:02 Parameters OK 05:03:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:02 Set A/D data flow result=40 05:03:02 Set A/D channel type result=40 05:03:02 Set A/D encoding result=40 05:03:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:02 Set channel filter=0.000000e+000 result=40 05:03:02 Config A/D Result=40 05:03:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:02 Get A/D filter: -9.255963e+061 result=40 05:03:02 Get A/D value=-858993460 result=40 05:03:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:02 Aux= 05:03:02 Message to Camera, serial 112753 queued 05:03:10 Received message from Master: op=Shutter serial=112763 05:03:10 Shutter LASER close 05:03:11 Received message from Master: op=PointingHead serial=112767 05:03:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:03:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:03:11 Point started: ret=0 05:03:11 point_skyscan result=0 05:03:12 Check angles 05:03:12 SkyScan query 05:03:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 05:03:13 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 05:03:13 Check angles 05:03:13 SkyScan query 05:03:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 05:03:13 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 05:03:14 Check angles 05:03:14 SkyScan query 05:03:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.485<-18699 Statuses=0008 0009 05:03:14 Msec=1500 True Az=112.995 Ze=-100.485 Az status=0008 Ze status=0009 05:03:14 Check angles 05:03:14 SkyScan query 05:03:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.515<-17301 Statuses=0008 0009 05:03:15 Msec=2250 True Az=112.995 Ze=-79.515 Az status=0008 Ze status=0009 05:03:15 Check angles 05:03:15 SkyScan query 05:03:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.56<-15904 Statuses=0008 0009 05:03:16 Msec=3000 True Az=112.995 Ze=-58.56 Az status=0008 Ze status=0009 05:03:16 Check angles 05:03:16 SkyScan query 05:03:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.62<-14508 Statuses=0008 0009 05:03:16 Msec=3750 True Az=112.995 Ze=-37.62 Az status=0008 Ze status=0009 05:03:17 Check angles 05:03:17 SkyScan query 05:03:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.65<-13110 Statuses=0008 0009 05:03:17 Msec=4500 True Az=112.995 Ze=-16.65 Az status=0008 Ze status=0009 05:03:17 Check angles 05:03:17 SkyScan query 05:03:18 SkyScan query done: ret=0 az=112.995<-7533 ze=4.26<-11716 Statuses=0008 0009 05:03:18 Msec=5250 True Az=112.995 Ze=4.26 Az status=0008 Ze status=0009 05:03:18 Check angles 05:03:18 SkyScan query 05:03:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:03:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:03:19 Message to Master queued w/err=0: serial=112767 error=0 05:03:24 Received message from Master: op=Filter serial=112768 05:03:24 Color wheel filter change from 0 to 0 05:03:24 FLIGetFilterPos err=0 currentPosition=0 05:03:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:24 Filter is already there-color wheel unchanged 05:03:24 Received message from Master: op=Shutter serial=112769 05:03:24 Shutter LASER close 05:03:24 Received message from Camera: op=State serial=112771 05:03:24 GetSingleValue result=40 Value=cccccccc 05:03:24 SkyScan query 05:03:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:03:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:25 Parameters OK 05:03:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:25 Set A/D data flow result=40 05:03:25 Set A/D channel type result=40 05:03:25 Set A/D encoding result=40 05:03:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:25 Set channel filter=0.000000e+000 result=40 05:03:25 Config A/D Result=40 05:03:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:25 Get A/D filter: -9.255963e+061 result=40 05:03:25 Get A/D value=-858993460 result=40 05:03:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:25 Parameters OK 05:03:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:25 Set A/D data flow result=40 05:03:25 Set A/D channel type result=40 05:03:25 Set A/D encoding result=40 05:03:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:25 Set channel filter=0.000000e+000 result=40 05:03:25 Config A/D Result=40 05:03:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:25 Get A/D filter: -9.255963e+061 result=40 05:03:25 Get A/D value=-858993460 result=40 05:03:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:25 Aux= 05:03:25 Message to Camera, serial 112771 queued 05:03:38 Received message from Master: op=Identify serial=112772 [UTC 2019-3-5 05:03:50] 05:04:01 Received message from Master: op=PointingHead serial=112787 05:04:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:04:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:04:02 Point started: ret=0 05:04:02 point_skyscan result=0 05:04:02 Check angles 05:04:02 SkyScan query 05:04:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:04:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:04:03 Message to Master queued w/err=0: serial=112787 error=0 05:04:08 Received message from Master: op=Filter serial=112788 05:04:08 Color wheel filter change from 0 to 0 05:04:08 FLIGetFilterPos err=0 currentPosition=0 05:04:08 FLIGetStepsRemaining err=0 RemainingSteps=0 05:04:08 Filter is already there-color wheel unchanged 05:04:08 Received message from Master: op=Shutter serial=112789 05:04:08 Shutter LASER close 05:04:08 Received message from Camera: op=State serial=112791 05:04:08 GetSingleValue result=40 Value=cccccccc 05:04:08 SkyScan query 05:04:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:04:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:09 Parameters OK 05:04:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:09 Set A/D data flow result=40 05:04:09 Set A/D channel type result=40 05:04:09 Set A/D encoding result=40 05:04:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:09 Set channel filter=0.000000e+000 result=40 05:04:09 Config A/D Result=40 05:04:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:09 Get A/D filter: -9.255963e+061 result=40 05:04:09 Get A/D value=-858993460 result=40 05:04:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:09 Parameters OK 05:04:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:09 Set A/D data flow result=40 05:04:09 Set A/D channel type result=40 05:04:09 Set A/D encoding result=40 05:04:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:09 Set channel filter=0.000000e+000 result=40 05:04:09 Config A/D Result=40 05:04:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:09 Get A/D filter: -9.255963e+061 result=40 05:04:09 Get A/D value=-858993460 result=40 05:04:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:04:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:04:09 Aux= 05:04:09 Message to Camera, serial 112791 queued 05:04:46 Received message from Master: op=PointingHead serial=112804 05:04:46 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:04:46 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:04:46 Point started: ret=0 05:04:46 point_skyscan result=0 05:04:47 Check angles 05:04:47 SkyScan query 05:04:47 SkyScan query done: ret=0 az=135.855<-9057 ze=-6.51<-12434 Statuses=0009 0008 05:04:47 Msec=0 True Az=135.855 Ze=-6.51 Az status=0009 Ze status=0008 05:04:47 Check angles 05:04:47 SkyScan query 05:04:48 SkyScan query done: ret=0 az=153.315<-10221 ze=-6.495<-12433 Statuses=0009 0008 05:04:48 Msec=750 True Az=153.315 Ze=-6.495 Az status=0009 Ze status=0008 05:04:48 Check angles 05:04:48 SkyScan query 05:04:49 SkyScan query done: ret=0 az=170.775<-11385 ze=-6.495<-12433 Statuses=0009 0008 05:04:49 Msec=1500 True Az=170.775 Ze=-6.495 Az status=0009 Ze status=0008 05:04:49 Check angles 05:04:49 SkyScan query 05:04:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:04:50 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:04:50 Message to Master queued w/err=0: serial=112804 error=0 05:04:55 Received message from Master: op=Filter serial=112805 05:04:55 Color wheel filter change from 0 to 0 05:04:55 FLIGetFilterPos err=0 currentPosition=0 05:04:55 FLIGetStepsRemaining err=0 RemainingSteps=0 05:04:55 Filter is already there-color wheel unchanged 05:04:55 Received message from Master: op=Shutter serial=112806 05:04:55 Shutter LASER close 05:04:55 Received message from Camera: op=State serial=112808 05:04:55 GetSingleValue result=40 Value=cccccccc 05:04:55 SkyScan query 05:04:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:04:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:55 Parameters OK 05:04:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:55 Set A/D data flow result=40 05:04:55 Set A/D channel type result=40 05:04:55 Set A/D encoding result=40 05:04:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:55 Set channel filter=0.000000e+000 result=40 05:04:55 Config A/D Result=40 05:04:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:55 Get A/D filter: -9.255963e+061 result=40 05:04:55 Get A/D value=-858993460 result=40 05:04:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:55 Parameters OK 05:04:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:55 Set A/D data flow result=40 05:04:55 Set A/D channel type result=40 05:04:55 Set A/D encoding result=40 05:04:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:55 Set channel filter=0.000000e+000 result=40 05:04:55 Config A/D Result=40 05:04:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:55 Get A/D filter: -9.255963e+061 result=40 05:04:55 Get A/D value=-858993460 result=40 05:04:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:04:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:04:55 Aux= 05:04:55 Message to Camera, serial 112808 queued 05:05:32 Received message from Master: op=PointingHead serial=112821 05:05:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:05:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:05:33 Point started: ret=0 05:05:33 point_skyscan result=0 05:05:33 Check angles 05:05:33 SkyScan query 05:05:34 SkyScan query done: ret=0 az=153.03<-10202 ze=6.51<-11566 Statuses=0009 0008 05:05:34 Msec=0 True Az=153.03 Ze=6.51 Az status=0009 Ze status=0008 05:05:34 Check angles 05:05:34 SkyScan query 05:05:35 SkyScan query done: ret=0 az=135.105<-9007 ze=6.495<-11567 Statuses=0009 0008 05:05:35 Msec=750 True Az=135.105 Ze=6.495 Az status=0009 Ze status=0008 05:05:35 Check angles 05:05:35 SkyScan query 05:05:35 SkyScan query done: ret=0 az=117.645<-7843 ze=6.495<-11567 Statuses=0009 0008 05:05:35 Msec=1500 True Az=117.645 Ze=6.495 Az status=0009 Ze status=0008 05:05:36 Check angles 05:05:36 SkyScan query 05:05:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:05:36 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:05:36 Message to Master queued w/err=0: serial=112821 error=0 05:05:41 Received message from Master: op=Filter serial=112822 05:05:41 Color wheel filter change from 0 to 0 05:05:41 FLIGetFilterPos err=0 currentPosition=0 05:05:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:05:41 Filter is already there-color wheel unchanged 05:05:41 Received message from Master: op=Shutter serial=112823 05:05:41 Shutter LASER close 05:05:41 Received message from Camera: op=State serial=112825 05:05:41 GetSingleValue result=40 Value=cccccccc 05:05:41 SkyScan query 05:05:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:05:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:42 Parameters OK 05:05:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:42 Set A/D data flow result=40 05:05:42 Set A/D channel type result=40 05:05:42 Set A/D encoding result=40 05:05:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:42 Set channel filter=0.000000e+000 result=40 05:05:42 Config A/D Result=40 05:05:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:42 Get A/D filter: -9.255963e+061 result=40 05:05:42 Get A/D value=-858993460 result=40 05:05:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:42 Parameters OK 05:05:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:42 Set A/D data flow result=40 05:05:42 Set A/D channel type result=40 05:05:42 Set A/D encoding result=40 05:05:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:42 Set channel filter=0.000000e+000 result=40 05:05:42 Config A/D Result=40 05:05:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:42 Get A/D filter: -9.255963e+061 result=40 05:05:42 Get A/D value=-858993460 result=40 05:05:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:05:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:05:42 Aux= 05:05:42 Message to Camera, serial 112825 queued 05:06:19 Received message from Master: op=PointingHead serial=112838 05:06:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:06:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:06:19 Point started: ret=0 05:06:19 point_skyscan result=0 05:06:20 Check angles 05:06:20 SkyScan query 05:06:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.625<-13575 Statuses=0008 0009 05:06:20 Msec=0 True Az=112.995 Ze=-23.625 Az status=0008 Ze status=0009 05:06:21 Check angles 05:06:21 SkyScan query 05:06:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.805<-14987 Statuses=0008 0009 05:06:21 Msec=750 True Az=112.995 Ze=-44.805 Az status=0008 Ze status=0009 05:06:21 Check angles 05:06:21 SkyScan query 05:06:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.76<-16384 Statuses=0008 0009 05:06:22 Msec=1500 True Az=112.995 Ze=-65.76 Az status=0008 Ze status=0009 05:06:22 Check angles 05:06:22 SkyScan query 05:06:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 05:06:23 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 05:06:23 Check angles 05:06:23 SkyScan query 05:06:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.105<-19207 Statuses=0008 0009 05:06:23 Msec=3000 True Az=112.995 Ze=-108.105 Az status=0008 Ze status=0009 05:06:24 Check angles 05:06:24 SkyScan query 05:06:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.045<-20603 Statuses=0008 0009 05:06:24 Msec=3750 True Az=112.995 Ze=-129.045 Az status=0008 Ze status=0009 05:06:24 Check angles 05:06:24 SkyScan query 05:06:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.015<-22001 Statuses=0008 0009 05:06:25 Msec=4500 True Az=112.995 Ze=-150.015 Az status=0008 Ze status=0009 05:06:25 Check angles 05:06:25 SkyScan query 05:06:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.865<-23391 Statuses=0008 0009 05:06:26 Msec=5250 True Az=112.995 Ze=-170.865 Az status=0008 Ze status=0009 05:06:26 Check angles 05:06:26 SkyScan query 05:06:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:06:26 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:06:26 Message to Master queued w/err=0: serial=112838 error=0 05:06:31 Received message from Master: op=Filter serial=112839 05:06:31 Color wheel filter change from 0 to 0 05:06:31 FLIGetFilterPos err=0 currentPosition=0 05:06:31 FLIGetStepsRemaining err=0 RemainingSteps=0 05:06:31 Filter is already there-color wheel unchanged 05:06:32 Received message from Master: op=Shutter serial=112840 05:06:32 Shutter LASER open 05:06:32 Received message from Camera: op=State serial=112842 05:06:32 GetSingleValue result=40 Value=cccccccc 05:06:32 SkyScan query 05:06:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:06:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:32 Parameters OK 05:06:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:32 Set A/D data flow result=40 05:06:32 Set A/D channel type result=40 05:06:32 Set A/D encoding result=40 05:06:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:32 Set channel filter=0.000000e+000 result=40 05:06:32 Config A/D Result=40 05:06:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:32 Get A/D filter: -9.255963e+061 result=40 05:06:32 Get A/D value=-858993460 result=40 05:06:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:32 Parameters OK 05:06:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:32 Set A/D data flow result=40 05:06:32 Set A/D channel type result=40 05:06:32 Set A/D encoding result=40 05:06:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:32 Set channel filter=0.000000e+000 result=40 05:06:32 Config A/D Result=40 05:06:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:32 Get A/D filter: -9.255963e+061 result=40 05:06:32 Get A/D value=-858993460 result=40 05:06:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:06:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:06:32 Aux= 05:06:32 Message to Camera, serial 112842 queued 05:06:41 Received message from Master: op=Shutter serial=112852 05:06:41 Shutter LASER close 05:06:41 Received message from Master: op=PointingHead serial=112856 05:06:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:06:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:06:42 Point started: ret=0 05:06:42 point_skyscan result=0 05:06:42 Check angles 05:06:42 SkyScan query 05:06:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.025<-21535 Statuses=0008 0009 05:06:43 Msec=0 True Az=112.995 Ze=-143.025 Az status=0008 Ze status=0009 05:06:43 Check angles 05:06:43 SkyScan query 05:06:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 05:06:44 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 05:06:44 Check angles 05:06:44 SkyScan query 05:06:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.025<-18735 Statuses=0008 0009 05:06:44 Msec=1500 True Az=112.995 Ze=-101.025 Az status=0008 Ze status=0009 05:06:45 Check angles 05:06:45 SkyScan query 05:06:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.175<-17345 Statuses=0008 0009 05:06:45 Msec=2250 True Az=112.995 Ze=-80.175 Az status=0008 Ze status=0009 05:06:45 Check angles 05:06:45 SkyScan query 05:06:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 05:06:46 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 05:06:46 Check angles 05:06:46 SkyScan query 05:06:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.22<-14548 Statuses=0008 0009 05:06:47 Msec=3750 True Az=112.995 Ze=-38.22 Az status=0008 Ze status=0009 05:06:47 Check angles 05:06:47 SkyScan query 05:06:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.845<-13123 Statuses=0008 0009 05:06:47 Msec=4500 True Az=112.995 Ze=-16.845 Az status=0008 Ze status=0009 05:06:48 Check angles 05:06:48 SkyScan query 05:06:48 SkyScan query done: ret=0 az=112.995<-7533 ze=4.095<-11727 Statuses=0008 0009 05:06:48 Msec=5250 True Az=112.995 Ze=4.095 Az status=0008 Ze status=0009 05:06:48 Check angles 05:06:48 SkyScan query 05:06:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:06:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:06:49 Message to Master queued w/err=0: serial=112856 error=0 05:06:54 Received message from Master: op=Filter serial=112857 05:06:54 Color wheel filter change from 0 to 0 05:06:54 FLIGetFilterPos err=0 currentPosition=0 05:06:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:06:54 Filter is already there-color wheel unchanged 05:06:54 Received message from Master: op=Shutter serial=112858 05:06:54 Shutter LASER close 05:06:54 Received message from Camera: op=State serial=112860 05:06:54 GetSingleValue result=40 Value=cccccccc 05:06:54 SkyScan query 05:06:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:06:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:55 Parameters OK 05:06:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:55 Set A/D data flow result=40 05:06:55 Set A/D channel type result=40 05:06:55 Set A/D encoding result=40 05:06:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:55 Set channel filter=0.000000e+000 result=40 05:06:55 Config A/D Result=40 05:06:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:55 Get A/D filter: -9.255963e+061 result=40 05:06:55 Get A/D value=-858993460 result=40 05:06:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:55 Parameters OK 05:06:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:55 Set A/D data flow result=40 05:06:55 Set A/D channel type result=40 05:06:55 Set A/D encoding result=40 05:06:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:55 Set channel filter=0.000000e+000 result=40 05:06:55 Config A/D Result=40 05:06:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:55 Get A/D filter: -9.255963e+061 result=40 05:06:55 Get A/D value=-858993460 result=40 05:06:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:06:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:06:55 Aux= 05:06:55 Message to Camera, serial 112860 queued 05:07:32 Received message from Master: op=PointingHead serial=112873 05:07:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:07:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:07:32 Point started: ret=0 05:07:32 point_skyscan result=0 05:07:33 Check angles 05:07:33 SkyScan query 05:07:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:07:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:07:33 Message to Master queued w/err=0: serial=112873 error=0 05:07:38 Received message from Master: op=Filter serial=112874 05:07:38 Color wheel filter change from 0 to 0 05:07:38 FLIGetFilterPos err=0 currentPosition=0 05:07:38 FLIGetStepsRemaining err=0 RemainingSteps=0 05:07:38 Filter is already there-color wheel unchanged 05:07:39 Received message from Master: op=Shutter serial=112875 05:07:39 Shutter LASER close 05:07:39 Received message from Camera: op=State serial=112877 05:07:39 GetSingleValue result=40 Value=cccccccc 05:07:39 SkyScan query 05:07:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:07:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:39 Parameters OK 05:07:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:39 Set A/D data flow result=40 05:07:39 Set A/D channel type result=40 05:07:39 Set A/D encoding result=40 05:07:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:39 Set channel filter=0.000000e+000 result=40 05:07:39 Config A/D Result=40 05:07:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:39 Get A/D filter: -9.255963e+061 result=40 05:07:39 Get A/D value=-858993460 result=40 05:07:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:39 Parameters OK 05:07:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:39 Set A/D data flow result=40 05:07:39 Set A/D channel type result=40 05:07:39 Set A/D encoding result=40 05:07:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:39 Set channel filter=0.000000e+000 result=40 05:07:39 Config A/D Result=40 05:07:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:39 Get A/D filter: -9.255963e+061 result=40 05:07:39 Get A/D value=-858993460 result=40 05:07:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:39 Aux= 05:07:39 Message to Camera, serial 112877 queued 05:08:15 Received message from Master: op=PointingHead serial=112889 05:08:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:08:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:08:15 Point started: ret=0 05:08:15 point_skyscan result=0 05:08:16 Check angles 05:08:16 SkyScan query 05:08:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:08:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:08:17 Message to Master queued w/err=0: serial=112889 error=0 05:08:22 Received message from Master: op=Filter serial=112890 05:08:22 Color wheel filter change from 0 to 0 05:08:22 FLIGetFilterPos err=0 currentPosition=0 05:08:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:08:22 Filter is already there-color wheel unchanged 05:08:22 Received message from Master: op=Shutter serial=112891 05:08:22 Shutter LASER close 05:08:22 Received message from Camera: op=State serial=112893 05:08:22 GetSingleValue result=40 Value=cccccccc 05:08:22 SkyScan query 05:08:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:08:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:22 Parameters OK 05:08:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:22 Set A/D data flow result=40 05:08:22 Set A/D channel type result=40 05:08:22 Set A/D encoding result=40 05:08:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:22 Set channel filter=0.000000e+000 result=40 05:08:22 Config A/D Result=40 05:08:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:22 Get A/D filter: -9.255963e+061 result=40 05:08:22 Get A/D value=-858993460 result=40 05:08:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:22 Parameters OK 05:08:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:22 Set A/D data flow result=40 05:08:22 Set A/D channel type result=40 05:08:22 Set A/D encoding result=40 05:08:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:22 Set channel filter=0.000000e+000 result=40 05:08:22 Config A/D Result=40 05:08:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:22 Get A/D filter: -9.255963e+061 result=40 05:08:22 Get A/D value=-858993460 result=40 05:08:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:08:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:08:22 Aux= 05:08:22 Message to Camera, serial 112893 queued 05:08:59 Received message from Master: op=PointingHead serial=112906 05:08:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:08:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:09:00 Point started: ret=0 05:09:00 point_skyscan result=0 05:09:00 Check angles 05:09:00 SkyScan query 05:09:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:09:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:09:01 Message to Master queued w/err=0: serial=112906 error=0 05:09:06 Received message from Master: op=Filter serial=112907 05:09:06 Color wheel filter change from 0 to 0 05:09:06 FLIGetFilterPos err=0 currentPosition=0 05:09:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:06 Filter is already there-color wheel unchanged 05:09:06 Received message from Master: op=Shutter serial=112908 05:09:06 Shutter LASER close 05:09:06 Received message from Camera: op=State serial=112910 05:09:06 GetSingleValue result=40 Value=cccccccc 05:09:06 SkyScan query 05:09:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:09:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:07 Parameters OK 05:09:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:07 Set A/D data flow result=40 05:09:07 Set A/D channel type result=40 05:09:07 Set A/D encoding result=40 05:09:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:07 Set channel filter=0.000000e+000 result=40 05:09:07 Config A/D Result=40 05:09:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:07 Get A/D filter: -9.255963e+061 result=40 05:09:07 Get A/D value=-858993460 result=40 05:09:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:07 Parameters OK 05:09:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:07 Set A/D data flow result=40 05:09:07 Set A/D channel type result=40 05:09:07 Set A/D encoding result=40 05:09:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:07 Set channel filter=0.000000e+000 result=40 05:09:07 Config A/D Result=40 05:09:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:07 Get A/D filter: -9.255963e+061 result=40 05:09:07 Get A/D value=-858993460 result=40 05:09:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:07 Aux= 05:09:07 Message to Camera, serial 112910 queued 05:09:44 Received message from Master: op=PointingHead serial=112923 05:09:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:09:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:09:44 Point started: ret=0 05:09:44 point_skyscan result=0 05:09:45 Check angles 05:09:45 SkyScan query 05:09:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.805<-13587 Statuses=0008 0009 05:09:45 Msec=0 True Az=112.995 Ze=-23.805 Az status=0008 Ze status=0009 05:09:45 Check angles 05:09:45 SkyScan query 05:09:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 05:09:46 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 05:09:46 Check angles 05:09:46 SkyScan query 05:09:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 05:09:47 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 05:09:47 Check angles 05:09:47 SkyScan query 05:09:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 05:09:48 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 05:09:48 Check angles 05:09:48 SkyScan query 05:09:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.595<-19173 Statuses=0008 0009 05:09:48 Msec=3000 True Az=112.995 Ze=-107.595 Az status=0008 Ze status=0009 05:09:48 Check angles 05:09:48 SkyScan query 05:09:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.52<-20568 Statuses=0008 0009 05:09:49 Msec=3750 True Az=112.995 Ze=-128.52 Az status=0008 Ze status=0009 05:09:49 Check angles 05:09:49 SkyScan query 05:09:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.49<-21966 Statuses=0008 0009 05:09:50 Msec=4500 True Az=112.995 Ze=-149.49 Az status=0008 Ze status=0009 05:09:50 Check angles 05:09:50 SkyScan query 05:09:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.445<-23363 Statuses=0008 0009 05:09:51 Msec=5250 True Az=112.995 Ze=-170.445 Az status=0008 Ze status=0009 05:09:51 Check angles 05:09:51 SkyScan query 05:09:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:09:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:09:51 Message to Master queued w/err=0: serial=112923 error=0 05:09:56 Received message from Master: op=Filter serial=112924 05:09:56 Color wheel filter change from 0 to 0 05:09:56 FLIGetFilterPos err=0 currentPosition=0 05:09:56 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:56 Filter is already there-color wheel unchanged 05:09:56 Received message from Master: op=Shutter serial=112925 05:09:56 Shutter LASER open 05:09:57 Received message from Camera: op=State serial=112927 05:09:57 GetSingleValue result=40 Value=cccccccc 05:09:57 SkyScan query 05:09:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:09:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:57 Parameters OK 05:09:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:57 Set A/D data flow result=40 05:09:57 Set A/D channel type result=40 05:09:57 Set A/D encoding result=40 05:09:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:57 Set channel filter=0.000000e+000 result=40 05:09:57 Config A/D Result=40 05:09:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:57 Get A/D filter: -9.255963e+061 result=40 05:09:57 Get A/D value=-858993460 result=40 05:09:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:57 Parameters OK 05:09:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:57 Set A/D data flow result=40 05:09:57 Set A/D channel type result=40 05:09:57 Set A/D encoding result=40 05:09:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:57 Set channel filter=0.000000e+000 result=40 05:09:57 Config A/D Result=40 05:09:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:57 Get A/D filter: -9.255963e+061 result=40 05:09:57 Get A/D value=-858993460 result=40 05:09:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:57 Aux= 05:09:57 Message to Camera, serial 112927 queued 05:10:06 Received message from Master: op=Shutter serial=112937 05:10:06 Shutter LASER close 05:10:06 Received message from Master: op=PointingHead serial=112941 05:10:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:10:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:10:07 Point started: ret=0 05:10:07 point_skyscan result=0 05:10:07 Check angles 05:10:07 SkyScan query 05:10:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 05:10:08 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 05:10:08 Check angles 05:10:08 SkyScan query 05:10:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 05:10:09 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 05:10:09 Check angles 05:10:09 SkyScan query 05:10:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.55<-18770 Statuses=0008 0009 05:10:09 Msec=1500 True Az=112.995 Ze=-101.55 Az status=0008 Ze status=0009 05:10:10 Check angles 05:10:10 SkyScan query 05:10:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.58<-17372 Statuses=0008 0009 05:10:10 Msec=2250 True Az=112.995 Ze=-80.58 Az status=0008 Ze status=0009 05:10:10 Check angles 05:10:10 SkyScan query 05:10:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.655<-15977 Statuses=0008 0009 05:10:11 Msec=3000 True Az=112.995 Ze=-59.655 Az status=0008 Ze status=0009 05:10:11 Check angles 05:10:11 SkyScan query 05:10:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.7<-14580 Statuses=0008 0009 05:10:12 Msec=3750 True Az=112.995 Ze=-38.7 Az status=0008 Ze status=0009 05:10:12 Check angles 05:10:12 SkyScan query 05:10:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.73<-13182 Statuses=0008 0009 05:10:12 Msec=4500 True Az=112.995 Ze=-17.73 Az status=0008 Ze status=0009 05:10:13 Check angles 05:10:13 SkyScan query 05:10:13 SkyScan query done: ret=0 az=112.995<-7533 ze=3.225<-11785 Statuses=0008 0009 05:10:13 Msec=5250 True Az=112.995 Ze=3.225 Az status=0008 Ze status=0009 05:10:13 Check angles 05:10:13 SkyScan query 05:10:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:10:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:10:14 Message to Master queued w/err=0: serial=112941 error=0 05:10:19 Received message from Master: op=Filter serial=112942 05:10:19 Color wheel filter change from 0 to 0 05:10:19 FLIGetFilterPos err=0 currentPosition=0 05:10:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:10:19 Filter is already there-color wheel unchanged 05:10:19 Received message from Master: op=Shutter serial=112943 05:10:19 Shutter LASER close 05:10:19 Received message from Camera: op=State serial=112945 05:10:19 GetSingleValue result=40 Value=cccccccc 05:10:19 SkyScan query 05:10:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:10:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:20 Parameters OK 05:10:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:20 Set A/D data flow result=40 05:10:20 Set A/D channel type result=40 05:10:20 Set A/D encoding result=40 05:10:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:20 Set channel filter=0.000000e+000 result=40 05:10:20 Config A/D Result=40 05:10:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:20 Get A/D filter: -9.255963e+061 result=40 05:10:20 Get A/D value=-858993460 result=40 05:10:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:20 Parameters OK 05:10:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:20 Set A/D data flow result=40 05:10:20 Set A/D channel type result=40 05:10:20 Set A/D encoding result=40 05:10:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:20 Set channel filter=0.000000e+000 result=40 05:10:20 Config A/D Result=40 05:10:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:20 Get A/D filter: -9.255963e+061 result=40 05:10:20 Get A/D value=-858993460 result=40 05:10:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:10:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:10:20 Aux= 05:10:20 Message to Camera, serial 112945 queued 05:10:57 Received message from Master: op=PointingHead serial=112958 05:10:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:10:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:10:57 Point started: ret=0 05:10:57 point_skyscan result=0 05:10:58 Check angles 05:10:58 SkyScan query 05:10:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:10:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:10:58 Message to Master queued w/err=0: serial=112958 error=0 05:11:03 Received message from Master: op=Filter serial=112959 05:11:03 Color wheel filter change from 0 to 0 05:11:03 FLIGetFilterPos err=0 currentPosition=0 05:11:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:11:03 Filter is already there-color wheel unchanged 05:11:04 Received message from Master: op=Shutter serial=112960 05:11:04 Shutter LASER close 05:11:04 Received message from Camera: op=State serial=112962 05:11:04 GetSingleValue result=40 Value=cccccccc 05:11:04 SkyScan query 05:11:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:11:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:04 Parameters OK 05:11:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:04 Set A/D data flow result=40 05:11:04 Set A/D channel type result=40 05:11:04 Set A/D encoding result=40 05:11:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:04 Set channel filter=0.000000e+000 result=40 05:11:04 Config A/D Result=40 05:11:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:04 Get A/D filter: -9.255963e+061 result=40 05:11:04 Get A/D value=-858993460 result=40 05:11:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:04 Parameters OK 05:11:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:04 Set A/D data flow result=40 05:11:04 Set A/D channel type result=40 05:11:04 Set A/D encoding result=40 05:11:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:04 Set channel filter=0.000000e+000 result=40 05:11:04 Config A/D Result=40 05:11:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:04 Get A/D filter: -9.255963e+061 result=40 05:11:04 Get A/D value=-858993460 result=40 05:11:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:11:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:11:04 Aux= 05:11:04 Message to Camera, serial 112962 queued 05:11:41 Received message from Master: op=PointingHead serial=112975 05:11:41 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:11:41 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:11:41 Point started: ret=0 05:11:41 point_skyscan result=0 05:11:42 Check angles 05:11:42 SkyScan query 05:11:43 SkyScan query done: ret=0 az=135.78<-9052 ze=-6.51<-12434 Statuses=0009 0008 05:11:43 Msec=0 True Az=135.78 Ze=-6.51 Az status=0009 Ze status=0008 05:11:43 Check angles 05:11:43 SkyScan query 05:11:43 SkyScan query done: ret=0 az=153.3<-10220 ze=-6.495<-12433 Statuses=0009 0008 05:11:43 Msec=750 True Az=153.3 Ze=-6.495 Az status=0009 Ze status=0008 05:11:44 Check angles 05:11:44 SkyScan query 05:11:44 SkyScan query done: ret=0 az=170.745<-11383 ze=-6.495<-12433 Statuses=0009 0008 05:11:44 Msec=1500 True Az=170.745 Ze=-6.495 Az status=0009 Ze status=0008 05:11:44 Check angles 05:11:44 SkyScan query 05:11:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:11:45 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:11:45 Message to Master queued w/err=0: serial=112975 error=0 05:11:50 Received message from Master: op=Filter serial=112976 05:11:50 Color wheel filter change from 0 to 0 05:11:50 FLIGetFilterPos err=0 currentPosition=0 05:11:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:11:50 Filter is already there-color wheel unchanged 05:11:50 Received message from Master: op=Shutter serial=112977 05:11:50 Shutter LASER close 05:11:50 Received message from Camera: op=State serial=112979 05:11:50 GetSingleValue result=40 Value=cccccccc 05:11:50 SkyScan query 05:11:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:11:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:51 Parameters OK 05:11:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:51 Set A/D data flow result=40 05:11:51 Set A/D channel type result=40 05:11:51 Set A/D encoding result=40 05:11:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:51 Set channel filter=0.000000e+000 result=40 05:11:51 Config A/D Result=40 05:11:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:51 Get A/D filter: -9.255963e+061 result=40 05:11:51 Get A/D value=-858993460 result=40 05:11:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:51 Parameters OK 05:11:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:51 Set A/D data flow result=40 05:11:51 Set A/D channel type result=40 05:11:51 Set A/D encoding result=40 05:11:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:51 Set channel filter=0.000000e+000 result=40 05:11:51 Config A/D Result=40 05:11:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:51 Get A/D filter: -9.255963e+061 result=40 05:11:51 Get A/D value=-858993460 result=40 05:11:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:11:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:11:51 Aux= 05:11:51 Message to Camera, serial 112979 queued 05:12:28 Received message from Master: op=PointingHead serial=112992 05:12:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:12:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:12:28 Point started: ret=0 05:12:28 point_skyscan result=0 05:12:29 Check angles 05:12:29 SkyScan query 05:12:29 SkyScan query done: ret=0 az=153<-10200 ze=6.51<-11566 Statuses=0009 0008 05:12:29 Msec=0 True Az=153 Ze=6.51 Az status=0009 Ze status=0008 05:12:29 Check angles 05:12:29 SkyScan query 05:12:30 SkyScan query done: ret=0 az=135.555<-9037 ze=6.495<-11567 Statuses=0009 0008 05:12:30 Msec=750 True Az=135.555 Ze=6.495 Az status=0009 Ze status=0008 05:12:30 Check angles 05:12:30 SkyScan query 05:12:31 SkyScan query done: ret=0 az=117.99<-7866 ze=6.495<-11567 Statuses=0009 0008 05:12:31 Msec=1500 True Az=117.99 Ze=6.495 Az status=0009 Ze status=0008 05:12:31 Check angles 05:12:31 SkyScan query 05:12:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:12:31 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:12:31 Message to Master queued w/err=0: serial=112992 error=0 05:12:36 Received message from Master: op=Filter serial=112993 05:12:36 Color wheel filter change from 0 to 0 05:12:36 FLIGetFilterPos err=0 currentPosition=0 05:12:36 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:36 Filter is already there-color wheel unchanged 05:12:37 Received message from Master: op=Shutter serial=112994 05:12:37 Shutter LASER close 05:12:37 Received message from Camera: op=State serial=112996 05:12:37 GetSingleValue result=40 Value=cccccccc 05:12:37 SkyScan query 05:12:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:12:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:37 Parameters OK 05:12:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:37 Set A/D data flow result=40 05:12:37 Set A/D channel type result=40 05:12:37 Set A/D encoding result=40 05:12:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:37 Set channel filter=0.000000e+000 result=40 05:12:37 Config A/D Result=40 05:12:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:37 Get A/D filter: -9.255963e+061 result=40 05:12:37 Get A/D value=-858993460 result=40 05:12:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:37 Parameters OK 05:12:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:37 Set A/D data flow result=40 05:12:37 Set A/D channel type result=40 05:12:37 Set A/D encoding result=40 05:12:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:37 Set channel filter=0.000000e+000 result=40 05:12:37 Config A/D Result=40 05:12:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:37 Get A/D filter: -9.255963e+061 result=40 05:12:37 Get A/D value=-858993460 result=40 05:12:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:37 Aux= 05:12:37 Message to Camera, serial 112996 queued 05:13:14 Received message from Master: op=PointingHead serial=113009 05:13:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:13:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:13:14 Point started: ret=0 05:13:14 point_skyscan result=0 05:13:15 Check angles 05:13:15 SkyScan query 05:13:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 05:13:16 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 05:13:16 Check angles 05:13:16 SkyScan query 05:13:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.055<-14937 Statuses=0008 0009 05:13:17 Msec=750 True Az=112.995 Ze=-44.055 Az status=0008 Ze status=0009 05:13:17 Check angles 05:13:17 SkyScan query 05:13:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.995<-16333 Statuses=0008 0009 05:13:17 Msec=1500 True Az=112.995 Ze=-64.995 Az status=0008 Ze status=0009 05:13:17 Check angles 05:13:17 SkyScan query 05:13:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.965<-17731 Statuses=0008 0009 05:13:18 Msec=2250 True Az=112.995 Ze=-85.965 Az status=0008 Ze status=0009 05:13:18 Check angles 05:13:18 SkyScan query 05:13:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.875<-19125 Statuses=0008 0009 05:13:19 Msec=3000 True Az=112.995 Ze=-106.875 Az status=0008 Ze status=0009 05:13:19 Check angles 05:13:19 SkyScan query 05:13:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.845<-20523 Statuses=0008 0009 05:13:20 Msec=3750 True Az=112.995 Ze=-127.845 Az status=0008 Ze status=0009 05:13:20 Check angles 05:13:20 SkyScan query 05:13:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.785<-21919 Statuses=0008 0009 05:13:20 Msec=4500 True Az=112.995 Ze=-148.785 Az status=0008 Ze status=0009 05:13:20 Check angles 05:13:20 SkyScan query 05:13:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.74<-23316 Statuses=0008 0009 05:13:21 Msec=5250 True Az=112.995 Ze=-169.74 Az status=0008 Ze status=0009 05:13:21 Check angles 05:13:21 SkyScan query 05:13:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:13:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:13:22 Message to Master queued w/err=0: serial=113009 error=0 05:13:27 Received message from Master: op=Filter serial=113010 05:13:27 Color wheel filter change from 0 to 0 05:13:27 FLIGetFilterPos err=0 currentPosition=0 05:13:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:13:27 Filter is already there-color wheel unchanged 05:13:27 Received message from Master: op=Shutter serial=113011 05:13:27 Shutter LASER open 05:13:27 Received message from Camera: op=State serial=113013 05:13:27 GetSingleValue result=40 Value=cccccccc 05:13:27 SkyScan query 05:13:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:13:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:28 Parameters OK 05:13:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:28 Set A/D data flow result=40 05:13:28 Set A/D channel type result=40 05:13:28 Set A/D encoding result=40 05:13:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:28 Set channel filter=0.000000e+000 result=40 05:13:28 Config A/D Result=40 05:13:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:28 Get A/D filter: -9.255963e+061 result=40 05:13:28 Get A/D value=-858993460 result=40 05:13:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:28 Parameters OK 05:13:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:28 Set A/D data flow result=40 05:13:28 Set A/D channel type result=40 05:13:28 Set A/D encoding result=40 05:13:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:28 Set channel filter=0.000000e+000 result=40 05:13:28 Config A/D Result=40 05:13:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:28 Get A/D filter: -9.255963e+061 result=40 05:13:28 Get A/D value=-858993460 result=40 05:13:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:13:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:13:28 Aux= 05:13:28 Message to Camera, serial 113013 queued 05:13:36 Received message from Master: op=Shutter serial=113023 05:13:36 Shutter LASER close 05:13:37 Received message from Master: op=PointingHead serial=113027 05:13:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:13:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:13:37 Point started: ret=0 05:13:37 point_skyscan result=0 05:13:38 Check angles 05:13:38 SkyScan query 05:13:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.8<-21520 Statuses=0008 0009 05:13:38 Msec=0 True Az=112.995 Ze=-142.8 Az status=0008 Ze status=0009 05:13:39 Check angles 05:13:39 SkyScan query 05:13:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.41<-20094 Statuses=0008 0009 05:13:39 Msec=750 True Az=112.995 Ze=-121.41 Az status=0008 Ze status=0009 05:13:39 Check angles 05:13:39 SkyScan query 05:13:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.005<-18667 Statuses=0008 0009 05:13:40 Msec=1500 True Az=112.995 Ze=-100.005 Az status=0008 Ze status=0009 05:13:40 Check angles 05:13:40 SkyScan query 05:13:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.05<-17270 Statuses=0008 0009 05:13:41 Msec=2250 True Az=112.995 Ze=-79.05 Az status=0008 Ze status=0009 05:13:41 Check angles 05:13:41 SkyScan query 05:13:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.08<-15872 Statuses=0008 0009 05:13:41 Msec=3000 True Az=112.995 Ze=-58.08 Az status=0008 Ze status=0009 05:13:42 Check angles 05:13:42 SkyScan query 05:13:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.155<-14477 Statuses=0008 0009 05:13:42 Msec=3750 True Az=112.995 Ze=-37.155 Az status=0008 Ze status=0009 05:13:42 Check angles 05:13:42 SkyScan query 05:13:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.185<-13079 Statuses=0008 0009 05:13:43 Msec=4500 True Az=112.995 Ze=-16.185 Az status=0008 Ze status=0009 05:13:43 Check angles 05:13:43 SkyScan query 05:13:44 SkyScan query done: ret=0 az=112.995<-7533 ze=4.62<-11692 Statuses=0008 0009 05:13:44 Msec=5250 True Az=112.995 Ze=4.62 Az status=0008 Ze status=0009 05:13:44 Check angles 05:13:44 SkyScan query 05:13:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:13:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:13:44 Message to Master queued w/err=0: serial=113027 error=0 05:13:49 Received message from Master: op=Filter serial=113028 05:13:49 Color wheel filter change from 0 to 0 05:13:49 FLIGetFilterPos err=0 currentPosition=0 05:13:49 FLIGetStepsRemaining err=0 RemainingSteps=0 05:13:49 Filter is already there-color wheel unchanged 05:13:50 Received message from Master: op=Shutter serial=113029 05:13:50 Shutter LASER close 05:13:50 Received message from Camera: op=State serial=113031 05:13:50 GetSingleValue result=40 Value=cccccccc 05:13:50 SkyScan query 05:13:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:13:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:50 Parameters OK 05:13:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:50 Set A/D data flow result=40 05:13:50 Set A/D channel type result=40 05:13:50 Set A/D encoding result=40 05:13:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:50 Set channel filter=0.000000e+000 result=40 05:13:50 Config A/D Result=40 05:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:50 Get A/D filter: -9.255963e+061 result=40 05:13:50 Get A/D value=-858993460 result=40 05:13:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:50 Parameters OK 05:13:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:50 Set A/D data flow result=40 05:13:50 Set A/D channel type result=40 [UTC 2019-3-5 05:13:50] 05:13:50 Set A/D encoding result=40 05:13:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:50 Set channel filter=0.000000e+000 result=40 05:13:50 Config A/D Result=40 05:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:50 Get A/D filter: -9.255963e+061 result=40 05:13:50 Get A/D value=-858993460 result=40 05:13:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:13:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:13:50 Aux= 05:13:50 Message to Camera, serial 113031 queued 05:14:27 Received message from Master: op=PointingHead serial=113044 05:14:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:14:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:14:27 Point started: ret=0 05:14:27 point_skyscan result=0 05:14:28 Check angles 05:14:28 SkyScan query 05:14:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:14:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:14:29 Message to Master queued w/err=0: serial=113044 error=0 05:14:34 Received message from Master: op=Filter serial=113045 05:14:34 Color wheel filter change from 0 to 0 05:14:34 FLIGetFilterPos err=0 currentPosition=0 05:14:34 FLIGetStepsRemaining err=0 RemainingSteps=0 05:14:34 Filter is already there-color wheel unchanged 05:14:34 Received message from Master: op=Shutter serial=113046 05:14:34 Shutter LASER close 05:14:34 Received message from Camera: op=State serial=113048 05:14:34 GetSingleValue result=40 Value=cccccccc 05:14:34 SkyScan query 05:14:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:14:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:35 Parameters OK 05:14:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:35 Set A/D data flow result=40 05:14:35 Set A/D channel type result=40 05:14:35 Set A/D encoding result=40 05:14:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:35 Set channel filter=0.000000e+000 result=40 05:14:35 Config A/D Result=40 05:14:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:35 Get A/D filter: -9.255963e+061 result=40 05:14:35 Get A/D value=-858993460 result=40 05:14:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:35 Parameters OK 05:14:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:35 Set A/D data flow result=40 05:14:35 Set A/D channel type result=40 05:14:35 Set A/D encoding result=40 05:14:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:35 Set channel filter=0.000000e+000 result=40 05:14:35 Config A/D Result=40 05:14:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:35 Get A/D filter: -9.255963e+061 result=40 05:14:35 Get A/D value=-858993460 result=40 05:14:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:14:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:14:35 Aux= 05:14:35 Message to Camera, serial 113048 queued 05:15:11 Received message from Master: op=PointingHead serial=113061 05:15:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:15:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:15:12 Point started: ret=0 05:15:12 point_skyscan result=0 05:15:13 Check angles 05:15:13 SkyScan query 05:15:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:15:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:15:13 Message to Master queued w/err=0: serial=113061 error=0 05:15:18 Received message from Master: op=Filter serial=113062 05:15:18 Color wheel filter change from 0 to 0 05:15:18 FLIGetFilterPos err=0 currentPosition=0 05:15:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:15:18 Filter is already there-color wheel unchanged 05:15:18 Received message from Master: op=Shutter serial=113063 05:15:18 Shutter LASER close 05:15:18 Received message from Camera: op=State serial=113065 05:15:18 GetSingleValue result=40 Value=cccccccc 05:15:18 SkyScan query 05:15:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:15:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:19 Parameters OK 05:15:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:19 Set A/D data flow result=40 05:15:19 Set A/D channel type result=40 05:15:19 Set A/D encoding result=40 05:15:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:19 Set channel filter=0.000000e+000 result=40 05:15:19 Config A/D Result=40 05:15:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:19 Get A/D filter: -9.255963e+061 result=40 05:15:19 Get A/D value=-858993460 result=40 05:15:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:19 Parameters OK 05:15:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:19 Set A/D data flow result=40 05:15:19 Set A/D channel type result=40 05:15:19 Set A/D encoding result=40 05:15:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:19 Set channel filter=0.000000e+000 result=40 05:15:19 Config A/D Result=40 05:15:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:19 Get A/D filter: -9.255963e+061 result=40 05:15:19 Get A/D value=-858993460 result=40 05:15:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:15:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:15:19 Aux= 05:15:19 Message to Camera, serial 113065 queued 05:15:56 Received message from Master: op=PointingHead serial=113078 05:15:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:15:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:15:56 Point started: ret=0 05:15:56 point_skyscan result=0 05:15:57 Check angles 05:15:57 SkyScan query 05:15:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:15:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:15:57 Message to Master queued w/err=0: serial=113078 error=0 05:16:02 Received message from Master: op=Filter serial=113079 05:16:02 Color wheel filter change from 0 to 0 05:16:02 FLIGetFilterPos err=0 currentPosition=0 05:16:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:02 Filter is already there-color wheel unchanged 05:16:03 Received message from Master: op=Shutter serial=113080 05:16:03 Shutter LASER close 05:16:03 Received message from Camera: op=State serial=113082 05:16:03 GetSingleValue result=40 Value=cccccccc 05:16:03 SkyScan query 05:16:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:16:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:03 Parameters OK 05:16:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:03 Set A/D data flow result=40 05:16:03 Set A/D channel type result=40 05:16:03 Set A/D encoding result=40 05:16:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:03 Set channel filter=0.000000e+000 result=40 05:16:03 Config A/D Result=40 05:16:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:03 Get A/D filter: -9.255963e+061 result=40 05:16:03 Get A/D value=-858993460 result=40 05:16:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:03 Parameters OK 05:16:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:03 Set A/D data flow result=40 05:16:03 Set A/D channel type result=40 05:16:03 Set A/D encoding result=40 05:16:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:03 Set channel filter=0.000000e+000 result=40 05:16:03 Config A/D Result=40 05:16:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:03 Get A/D filter: -9.255963e+061 result=40 05:16:03 Get A/D value=-858993460 result=40 05:16:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:03 Aux= 05:16:03 Message to Camera, serial 113082 queued 05:16:40 Received message from Master: op=PointingHead serial=113095 05:16:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:16:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:16:40 Point started: ret=0 05:16:40 point_skyscan result=0 05:16:41 Check angles 05:16:41 SkyScan query 05:16:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.85<-13590 Statuses=0008 0009 05:16:42 Msec=0 True Az=112.995 Ze=-23.85 Az status=0008 Ze status=0009 05:16:42 Check angles 05:16:42 SkyScan query 05:16:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 05:16:42 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 05:16:43 Check angles 05:16:43 SkyScan query 05:16:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.745<-16383 Statuses=0008 0009 05:16:43 Msec=1500 True Az=112.995 Ze=-65.745 Az status=0008 Ze status=0009 05:16:43 Check angles 05:16:43 SkyScan query 05:16:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 05:16:44 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 05:16:44 Check angles 05:16:44 SkyScan query 05:16:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.655<-19177 Statuses=0008 0009 05:16:45 Msec=3000 True Az=112.995 Ze=-107.655 Az status=0008 Ze status=0009 05:16:45 Check angles 05:16:45 SkyScan query 05:16:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.58<-20572 Statuses=0008 0009 05:16:45 Msec=3750 True Az=112.995 Ze=-128.58 Az status=0008 Ze status=0009 05:16:46 Check angles 05:16:46 SkyScan query 05:16:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-150<-22000 Statuses=0008 0009 05:16:46 Msec=4500 True Az=112.995 Ze=-150 Az status=0008 Ze status=0009 05:16:46 Check angles 05:16:46 SkyScan query 05:16:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.85<-23390 Statuses=0008 0009 05:16:47 Msec=5250 True Az=112.995 Ze=-170.85 Az status=0008 Ze status=0009 05:16:47 Check angles 05:16:47 SkyScan query 05:16:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:16:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:16:48 Message to Master queued w/err=0: serial=113095 error=0 05:16:53 Received message from Master: op=Filter serial=113096 05:16:53 Color wheel filter change from 0 to 0 05:16:53 FLIGetFilterPos err=0 currentPosition=0 05:16:53 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:53 Filter is already there-color wheel unchanged 05:16:53 Received message from Master: op=Shutter serial=113097 05:16:53 Shutter LASER open 05:16:53 Received message from Camera: op=State serial=113099 05:16:53 GetSingleValue result=40 Value=cccccccc 05:16:53 SkyScan query 05:16:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:16:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:54 Parameters OK 05:16:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:54 Set A/D data flow result=40 05:16:54 Set A/D channel type result=40 05:16:54 Set A/D encoding result=40 05:16:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:54 Set channel filter=0.000000e+000 result=40 05:16:54 Config A/D Result=40 05:16:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:54 Get A/D filter: -9.255963e+061 result=40 05:16:54 Get A/D value=-858993460 result=40 05:16:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:54 Parameters OK 05:16:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:54 Set A/D data flow result=40 05:16:54 Set A/D channel type result=40 05:16:54 Set A/D encoding result=40 05:16:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:54 Set channel filter=0.000000e+000 result=40 05:16:54 Config A/D Result=40 05:16:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:54 Get A/D filter: -9.255963e+061 result=40 05:16:54 Get A/D value=-858993460 result=40 05:16:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:54 Aux= 05:16:54 Message to Camera, serial 113099 queued 05:17:02 Received message from Master: op=Shutter serial=113109 05:17:02 Shutter LASER close 05:17:03 Received message from Master: op=PointingHead serial=113113 05:17:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:17:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:17:03 Point started: ret=0 05:17:03 point_skyscan result=0 05:17:04 Check angles 05:17:04 SkyScan query 05:17:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 05:17:04 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 05:17:05 Check angles 05:17:05 SkyScan query 05:17:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 05:17:05 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 05:17:05 Check angles 05:17:05 SkyScan query 05:17:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.68<-18712 Statuses=0008 0009 05:17:06 Msec=1500 True Az=112.995 Ze=-100.68 Az status=0008 Ze status=0009 05:17:06 Check angles 05:17:06 SkyScan query 05:17:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.71<-17314 Statuses=0008 0009 05:17:07 Msec=2250 True Az=112.995 Ze=-79.71 Az status=0008 Ze status=0009 05:17:07 Check angles 05:17:07 SkyScan query 05:17:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.785<-15919 Statuses=0008 0009 05:17:07 Msec=3000 True Az=112.995 Ze=-58.785 Az status=0008 Ze status=0009 05:17:08 Check angles 05:17:08 SkyScan query 05:17:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.8<-14520 Statuses=0008 0009 05:17:08 Msec=3750 True Az=112.995 Ze=-37.8 Az status=0008 Ze status=0009 05:17:08 Check angles 05:17:08 SkyScan query 05:17:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.845<-13123 Statuses=0008 0009 05:17:09 Msec=4500 True Az=112.995 Ze=-16.845 Az status=0008 Ze status=0009 05:17:09 Check angles 05:17:09 SkyScan query 05:17:10 SkyScan query done: ret=0 az=112.995<-7533 ze=4.095<-11727 Statuses=0008 0009 05:17:10 Msec=5250 True Az=112.995 Ze=4.095 Az status=0008 Ze status=0009 05:17:10 Check angles 05:17:10 SkyScan query 05:17:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:17:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:17:10 Message to Master queued w/err=0: serial=113113 error=0 05:17:15 Received message from Master: op=Filter serial=113114 05:17:15 Color wheel filter change from 0 to 0 05:17:15 FLIGetFilterPos err=0 currentPosition=0 05:17:15 FLIGetStepsRemaining err=0 RemainingSteps=0 05:17:15 Filter is already there-color wheel unchanged 05:17:16 Received message from Master: op=Shutter serial=113115 05:17:16 Shutter LASER close 05:17:16 Received message from Camera: op=State serial=113117 05:17:16 GetSingleValue result=40 Value=cccccccc 05:17:16 SkyScan query 05:17:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:17:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:16 Parameters OK 05:17:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:16 Set A/D data flow result=40 05:17:16 Set A/D channel type result=40 05:17:16 Set A/D encoding result=40 05:17:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:16 Set channel filter=0.000000e+000 result=40 05:17:16 Config A/D Result=40 05:17:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:16 Get A/D filter: -9.255963e+061 result=40 05:17:16 Get A/D value=-858993460 result=40 05:17:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:16 Parameters OK 05:17:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:16 Set A/D data flow result=40 05:17:16 Set A/D channel type result=40 05:17:16 Set A/D encoding result=40 05:17:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:16 Set channel filter=0.000000e+000 result=40 05:17:16 Config A/D Result=40 05:17:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:16 Get A/D filter: -9.255963e+061 result=40 05:17:16 Get A/D value=-858993460 result=40 05:17:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:17:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:17:16 Aux= 05:17:16 Message to Camera, serial 113117 queued 05:17:53 Received message from Master: op=PointingHead serial=113130 05:17:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:17:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:17:54 Point started: ret=0 05:17:54 point_skyscan result=0 05:17:54 Check angles 05:17:54 SkyScan query 05:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:17:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:17:55 Message to Master queued w/err=0: serial=113130 error=0 05:18:00 Received message from Master: op=Filter serial=113131 05:18:00 Color wheel filter change from 0 to 0 05:18:00 FLIGetFilterPos err=0 currentPosition=0 05:18:00 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:00 Filter is already there-color wheel unchanged 05:18:00 Received message from Master: op=Shutter serial=113132 05:18:00 Shutter LASER close 05:18:00 Received message from Camera: op=State serial=113134 05:18:00 GetSingleValue result=40 Value=cccccccc 05:18:00 SkyScan query 05:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:18:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:01 Parameters OK 05:18:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:01 Set A/D data flow result=40 05:18:01 Set A/D channel type result=40 05:18:01 Set A/D encoding result=40 05:18:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:01 Set channel filter=0.000000e+000 result=40 05:18:01 Config A/D Result=40 05:18:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:01 Get A/D filter: -9.255963e+061 result=40 05:18:01 Get A/D value=-858993460 result=40 05:18:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:01 Parameters OK 05:18:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:01 Set A/D data flow result=40 05:18:01 Set A/D channel type result=40 05:18:01 Set A/D encoding result=40 05:18:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:01 Set channel filter=0.000000e+000 result=40 05:18:01 Config A/D Result=40 05:18:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:01 Get A/D filter: -9.255963e+061 result=40 05:18:01 Get A/D value=-858993460 result=40 05:18:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:01 Aux= 05:18:01 Message to Camera, serial 113134 queued 05:18:37 Received message from Master: op=PointingHead serial=113147 05:18:37 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:18:37 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:18:38 Point started: ret=0 05:18:38 point_skyscan result=0 05:18:39 Check angles 05:18:39 SkyScan query 05:18:39 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 05:18:39 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 05:18:39 Check angles 05:18:39 SkyScan query 05:18:40 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.495<-12433 Statuses=0009 0008 05:18:40 Msec=750 True Az=153.93 Ze=-6.495 Az status=0009 Ze status=0008 05:18:40 Check angles 05:18:40 SkyScan query 05:18:41 SkyScan query done: ret=0 az=171.465<-11431 ze=-6.495<-12433 Statuses=0009 0008 05:18:41 Msec=1500 True Az=171.465 Ze=-6.495 Az status=0009 Ze status=0008 05:18:41 Check angles 05:18:41 SkyScan query 05:18:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:18:41 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:18:41 Message to Master queued w/err=0: serial=113147 error=0 05:18:46 Received message from Master: op=Filter serial=113148 05:18:46 Color wheel filter change from 0 to 0 05:18:46 FLIGetFilterPos err=0 currentPosition=0 05:18:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:46 Filter is already there-color wheel unchanged 05:18:47 Received message from Master: op=Shutter serial=113149 05:18:47 Shutter LASER close 05:18:47 Received message from Camera: op=State serial=113151 05:18:47 GetSingleValue result=40 Value=cccccccc 05:18:47 SkyScan query 05:18:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:18:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:47 Parameters OK 05:18:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:47 Set A/D data flow result=40 05:18:47 Set A/D channel type result=40 05:18:47 Set A/D encoding result=40 05:18:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:47 Set channel filter=0.000000e+000 result=40 05:18:47 Config A/D Result=40 05:18:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:47 Get A/D filter: -9.255963e+061 result=40 05:18:47 Get A/D value=-858993460 result=40 05:18:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:47 Parameters OK 05:18:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:47 Set A/D data flow result=40 05:18:47 Set A/D channel type result=40 05:18:47 Set A/D encoding result=40 05:18:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:47 Set channel filter=0.000000e+000 result=40 05:18:47 Config A/D Result=40 05:18:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:47 Get A/D filter: -9.255963e+061 result=40 05:18:47 Get A/D value=-858993460 result=40 05:18:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:47 Aux= 05:18:47 Message to Camera, serial 113151 queued 05:19:24 Received message from Master: op=PointingHead serial=113164 05:19:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:19:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:19:24 Point started: ret=0 05:19:24 point_skyscan result=0 05:19:25 Check angles 05:19:25 SkyScan query 05:19:26 SkyScan query done: ret=0 az=152.565<-10171 ze=6.51<-11566 Statuses=0009 0008 05:19:26 Msec=0 True Az=152.565 Ze=6.51 Az status=0009 Ze status=0008 05:19:26 Check angles 05:19:26 SkyScan query 05:19:26 SkyScan query done: ret=0 az=134.64<-8976 ze=6.495<-11567 Statuses=0009 0008 05:19:26 Msec=750 True Az=134.64 Ze=6.495 Az status=0009 Ze status=0008 05:19:27 Check angles 05:19:27 SkyScan query 05:19:27 SkyScan query done: ret=0 az=117.21<-7814 ze=6.495<-11567 Statuses=0009 0008 05:19:27 Msec=1500 True Az=117.21 Ze=6.495 Az status=0009 Ze status=0008 05:19:27 Check angles 05:19:27 SkyScan query 05:19:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:19:28 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:19:28 Message to Master queued w/err=0: serial=113164 error=0 05:19:33 Received message from Master: op=Filter serial=113165 05:19:33 Color wheel filter change from 0 to 0 05:19:33 FLIGetFilterPos err=0 currentPosition=0 05:19:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:19:33 Filter is already there-color wheel unchanged 05:19:33 Received message from Master: op=Shutter serial=113166 05:19:33 Shutter LASER close 05:19:33 Received message from Camera: op=State serial=113168 05:19:33 GetSingleValue result=40 Value=cccccccc 05:19:33 SkyScan query 05:19:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:19:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:34 Parameters OK 05:19:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:34 Set A/D data flow result=40 05:19:34 Set A/D channel type result=40 05:19:34 Set A/D encoding result=40 05:19:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:34 Set channel filter=0.000000e+000 result=40 05:19:34 Config A/D Result=40 05:19:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:34 Get A/D filter: -9.255963e+061 result=40 05:19:34 Get A/D value=-858993460 result=40 05:19:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:34 Parameters OK 05:19:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:34 Set A/D data flow result=40 05:19:34 Set A/D channel type result=40 05:19:34 Set A/D encoding result=40 05:19:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:34 Set channel filter=0.000000e+000 result=40 05:19:34 Config A/D Result=40 05:19:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:34 Get A/D filter: -9.255963e+061 result=40 05:19:34 Get A/D value=-858993460 result=40 05:19:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:19:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:19:34 Aux= 05:19:34 Message to Camera, serial 113168 queued 05:20:11 Received message from Master: op=PointingHead serial=113181 05:20:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:20:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:20:11 Point started: ret=0 05:20:11 point_skyscan result=0 05:20:12 Check angles 05:20:12 SkyScan query 05:20:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.445<-13563 Statuses=0008 0009 05:20:12 Msec=0 True Az=112.995 Ze=-23.445 Az status=0008 Ze status=0009 05:20:12 Check angles 05:20:12 SkyScan query 05:20:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.43<-14962 Statuses=0008 0009 05:20:13 Msec=750 True Az=112.995 Ze=-44.43 Az status=0008 Ze status=0009 05:20:13 Check angles 05:20:13 SkyScan query 05:20:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.37<-16358 Statuses=0008 0009 05:20:14 Msec=1500 True Az=112.995 Ze=-65.37 Az status=0008 Ze status=0009 05:20:14 Check angles 05:20:14 SkyScan query 05:20:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 05:20:15 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 05:20:15 Check angles 05:20:15 SkyScan query 05:20:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.265<-19151 Statuses=0008 0009 05:20:15 Msec=3000 True Az=112.995 Ze=-107.265 Az status=0008 Ze status=0009 05:20:15 Check angles 05:20:15 SkyScan query 05:20:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.175<-20545 Statuses=0008 0009 05:20:16 Msec=3750 True Az=112.995 Ze=-128.175 Az status=0008 Ze status=0009 05:20:16 Check angles 05:20:16 SkyScan query 05:20:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.595<-21973 Statuses=0008 0009 05:20:17 Msec=4500 True Az=112.995 Ze=-149.595 Az status=0008 Ze status=0009 05:20:17 Check angles 05:20:17 SkyScan query 05:20:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.505<-23367 Statuses=0008 0009 05:20:18 Msec=5250 True Az=112.995 Ze=-170.505 Az status=0008 Ze status=0009 05:20:18 Check angles 05:20:18 SkyScan query 05:20:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:20:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:20:18 Message to Master queued w/err=0: serial=113181 error=0 05:20:23 Received message from Master: op=Filter serial=113182 05:20:23 Color wheel filter change from 0 to 0 05:20:23 FLIGetFilterPos err=0 currentPosition=0 05:20:23 FLIGetStepsRemaining err=0 RemainingSteps=0 05:20:23 Filter is already there-color wheel unchanged 05:20:23 Received message from Master: op=Shutter serial=113183 05:20:23 Shutter LASER open 05:20:24 Received message from Camera: op=State serial=113185 05:20:24 GetSingleValue result=40 Value=cccccccc 05:20:24 SkyScan query 05:20:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:20:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:24 Parameters OK 05:20:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:24 Set A/D data flow result=40 05:20:24 Set A/D channel type result=40 05:20:24 Set A/D encoding result=40 05:20:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:24 Set channel filter=0.000000e+000 result=40 05:20:24 Config A/D Result=40 05:20:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:24 Get A/D filter: -9.255963e+061 result=40 05:20:24 Get A/D value=-858993460 result=40 05:20:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:24 Parameters OK 05:20:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:24 Set A/D data flow result=40 05:20:24 Set A/D channel type result=40 05:20:24 Set A/D encoding result=40 05:20:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:24 Set channel filter=0.000000e+000 result=40 05:20:24 Config A/D Result=40 05:20:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:24 Get A/D filter: -9.255963e+061 result=40 05:20:24 Get A/D value=-858993460 result=40 05:20:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:20:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:20:24 Aux= 05:20:24 Message to Camera, serial 113185 queued 05:20:33 Received message from Master: op=Shutter serial=113195 05:20:33 Shutter LASER close 05:20:33 Received message from Master: op=PointingHead serial=113199 05:20:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:20:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:20:33 Point started: ret=0 05:20:33 point_skyscan result=0 05:20:34 Check angles 05:20:34 SkyScan query 05:20:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 05:20:35 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 05:20:35 Check angles 05:20:35 SkyScan query 05:20:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.53<-20102 Statuses=0008 0009 05:20:36 Msec=750 True Az=112.995 Ze=-121.53 Az status=0008 Ze status=0009 05:20:36 Check angles 05:20:36 SkyScan query 05:20:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.59<-18706 Statuses=0008 0009 05:20:36 Msec=1500 True Az=112.995 Ze=-100.59 Az status=0008 Ze status=0009 05:20:36 Check angles 05:20:36 SkyScan query 05:20:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.635<-17309 Statuses=0008 0009 05:20:37 Msec=2250 True Az=112.995 Ze=-79.635 Az status=0008 Ze status=0009 05:20:37 Check angles 05:20:37 SkyScan query 05:20:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.695<-15913 Statuses=0008 0009 05:20:38 Msec=3000 True Az=112.995 Ze=-58.695 Az status=0008 Ze status=0009 05:20:38 Check angles 05:20:38 SkyScan query 05:20:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.71<-14514 Statuses=0008 0009 05:20:39 Msec=3750 True Az=112.995 Ze=-37.71 Az status=0008 Ze status=0009 05:20:39 Check angles 05:20:39 SkyScan query 05:20:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.77<-13118 Statuses=0008 0009 05:20:39 Msec=4500 True Az=112.995 Ze=-16.77 Az status=0008 Ze status=0009 05:20:39 Check angles 05:20:39 SkyScan query 05:20:40 SkyScan query done: ret=0 az=112.995<-7533 ze=4.17<-11722 Statuses=0008 0009 05:20:40 Msec=5250 True Az=112.995 Ze=4.17 Az status=0008 Ze status=0009 05:20:40 Check angles 05:20:40 SkyScan query 05:20:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:20:41 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:20:41 Message to Master queued w/err=0: serial=113199 error=0 05:20:46 Received message from Master: op=Filter serial=113200 05:20:46 Color wheel filter change from 0 to 0 05:20:46 FLIGetFilterPos err=0 currentPosition=0 05:20:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:20:46 Filter is already there-color wheel unchanged 05:20:46 Received message from Master: op=Shutter serial=113201 05:20:46 Shutter LASER close 05:20:46 Received message from Camera: op=State serial=113203 05:20:46 GetSingleValue result=40 Value=cccccccc 05:20:46 SkyScan query 05:20:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:20:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:47 Parameters OK 05:20:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:47 Set A/D data flow result=40 05:20:47 Set A/D channel type result=40 05:20:47 Set A/D encoding result=40 05:20:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:47 Set channel filter=0.000000e+000 result=40 05:20:47 Config A/D Result=40 05:20:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:47 Get A/D filter: -9.255963e+061 result=40 05:20:47 Get A/D value=-858993460 result=40 05:20:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:47 Parameters OK 05:20:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:47 Set A/D data flow result=40 05:20:47 Set A/D channel type result=40 05:20:47 Set A/D encoding result=40 05:20:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:47 Set channel filter=0.000000e+000 result=40 05:20:47 Config A/D Result=40 05:20:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:47 Get A/D filter: -9.255963e+061 result=40 05:20:47 Get A/D value=-858993460 result=40 05:20:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:20:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:20:47 Aux= 05:20:47 Message to Camera, serial 113203 queued 05:21:24 Received message from Master: op=PointingHead serial=113216 05:21:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:21:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:21:24 Point started: ret=0 05:21:24 point_skyscan result=0 05:21:25 Check angles 05:21:25 SkyScan query 05:21:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:21:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:21:25 Message to Master queued w/err=0: serial=113216 error=0 05:21:30 Received message from Master: op=Filter serial=113217 05:21:30 Color wheel filter change from 0 to 0 05:21:30 FLIGetFilterPos err=0 currentPosition=0 05:21:30 FLIGetStepsRemaining err=0 RemainingSteps=0 05:21:30 Filter is already there-color wheel unchanged 05:21:30 Received message from Master: op=Shutter serial=113218 05:21:30 Shutter LASER close 05:21:30 Received message from Camera: op=State serial=113220 05:21:30 GetSingleValue result=40 Value=cccccccc 05:21:30 SkyScan query 05:21:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:21:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:31 Parameters OK 05:21:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:31 Set A/D data flow result=40 05:21:31 Set A/D channel type result=40 05:21:31 Set A/D encoding result=40 05:21:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:31 Set channel filter=0.000000e+000 result=40 05:21:31 Config A/D Result=40 05:21:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:31 Get A/D filter: -9.255963e+061 result=40 05:21:31 Get A/D value=-858993460 result=40 05:21:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:31 Parameters OK 05:21:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:31 Set A/D data flow result=40 05:21:31 Set A/D channel type result=40 05:21:31 Set A/D encoding result=40 05:21:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:31 Set channel filter=0.000000e+000 result=40 05:21:31 Config A/D Result=40 05:21:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:31 Get A/D filter: -9.255963e+061 result=40 05:21:31 Get A/D value=-858993460 result=40 05:21:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:21:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:21:31 Aux= 05:21:31 Message to Camera, serial 113220 queued 05:22:08 Received message from Master: op=PointingHead serial=113233 05:22:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:22:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:22:08 Point started: ret=0 05:22:08 point_skyscan result=0 05:22:09 Check angles 05:22:09 SkyScan query 05:22:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:22:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:22:10 Message to Master queued w/err=0: serial=113233 error=0 05:22:15 Received message from Master: op=Filter serial=113234 05:22:15 Color wheel filter change from 0 to 0 05:22:15 FLIGetFilterPos err=0 currentPosition=0 05:22:15 FLIGetStepsRemaining err=0 RemainingSteps=0 05:22:15 Filter is already there-color wheel unchanged 05:22:15 Received message from Master: op=Shutter serial=113235 05:22:15 Shutter LASER close 05:22:15 Received message from Camera: op=State serial=113237 05:22:15 GetSingleValue result=40 Value=cccccccc 05:22:15 SkyScan query 05:22:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:22:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:15 Parameters OK 05:22:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:15 Set A/D data flow result=40 05:22:15 Set A/D channel type result=40 05:22:15 Set A/D encoding result=40 05:22:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:15 Set channel filter=0.000000e+000 result=40 05:22:15 Config A/D Result=40 05:22:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:15 Get A/D filter: -9.255963e+061 result=40 05:22:15 Get A/D value=-858993460 result=40 05:22:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:15 Parameters OK 05:22:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:15 Set A/D data flow result=40 05:22:15 Set A/D channel type result=40 05:22:15 Set A/D encoding result=40 05:22:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:15 Set channel filter=0.000000e+000 result=40 05:22:15 Config A/D Result=40 05:22:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:15 Get A/D filter: -9.255963e+061 result=40 05:22:15 Get A/D value=-858993460 result=40 05:22:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:22:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:22:15 Aux= 05:22:15 Message to Camera, serial 113237 queued 05:22:52 Received message from Master: op=PointingHead serial=113250 05:22:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:22:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:22:53 Point started: ret=0 05:22:53 point_skyscan result=0 05:22:53 Check angles 05:22:53 SkyScan query 05:22:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:22:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:22:54 Message to Master queued w/err=0: serial=113250 error=0 05:22:59 Received message from Master: op=Filter serial=113251 05:22:59 Color wheel filter change from 0 to 0 05:22:59 FLIGetFilterPos err=0 currentPosition=0 05:22:59 FLIGetStepsRemaining err=0 RemainingSteps=0 05:22:59 Filter is already there-color wheel unchanged 05:22:59 Received message from Master: op=Shutter serial=113252 05:22:59 Shutter LASER close 05:22:59 Received message from Camera: op=State serial=113254 05:22:59 GetSingleValue result=40 Value=cccccccc 05:22:59 SkyScan query 05:23:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:23:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:00 Parameters OK 05:23:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:00 Set A/D data flow result=40 05:23:00 Set A/D channel type result=40 05:23:00 Set A/D encoding result=40 05:23:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:00 Set channel filter=0.000000e+000 result=40 05:23:00 Config A/D Result=40 05:23:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:00 Get A/D filter: -9.255963e+061 result=40 05:23:00 Get A/D value=-858993460 result=40 05:23:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:00 Parameters OK 05:23:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:00 Set A/D data flow result=40 05:23:00 Set A/D channel type result=40 05:23:00 Set A/D encoding result=40 05:23:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:00 Set channel filter=0.000000e+000 result=40 05:23:00 Config A/D Result=40 05:23:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:00 Get A/D filter: -9.255963e+061 result=40 05:23:00 Get A/D value=-858993460 result=40 05:23:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:23:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:23:00 Aux= 05:23:00 Message to Camera, serial 113254 queued 05:23:36 Received message from Master: op=PointingHead serial=113267 05:23:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:23:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:23:37 Point started: ret=0 05:23:37 point_skyscan result=0 05:23:38 Check angles 05:23:38 SkyScan query 05:23:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 05:23:38 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 05:23:38 Check angles 05:23:38 SkyScan query 05:23:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.46<-14964 Statuses=0008 0009 05:23:39 Msec=750 True Az=112.995 Ze=-44.46 Az status=0008 Ze status=0009 05:23:39 Check angles 05:23:39 SkyScan query 05:23:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.835<-16389 Statuses=0008 0009 05:23:40 Msec=1500 True Az=112.995 Ze=-65.835 Az status=0008 Ze status=0009 05:23:40 Check angles 05:23:40 SkyScan query 05:23:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.88<-17792 Statuses=0008 0009 05:23:40 Msec=2250 True Az=112.995 Ze=-86.88 Az status=0008 Ze status=0009 05:23:41 Check angles 05:23:41 SkyScan query 05:23:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.745<-19183 Statuses=0008 0009 05:23:41 Msec=3000 True Az=112.995 Ze=-107.745 Az status=0008 Ze status=0009 05:23:41 Check angles 05:23:41 SkyScan query 05:23:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.685<-20579 Statuses=0008 0009 05:23:42 Msec=3750 True Az=112.995 Ze=-128.685 Az status=0008 Ze status=0009 05:23:42 Check angles 05:23:42 SkyScan query 05:23:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.655<-21977 Statuses=0008 0009 05:23:43 Msec=4500 True Az=112.995 Ze=-149.655 Az status=0008 Ze status=0009 05:23:43 Check angles 05:23:43 SkyScan query 05:23:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.58<-23372 Statuses=0008 0009 05:23:43 Msec=5250 True Az=112.995 Ze=-170.58 Az status=0008 Ze status=0009 05:23:44 Check angles 05:23:44 SkyScan query 05:23:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:23:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:23:44 Message to Master queued w/err=0: serial=113267 error=0 05:23:49 Received message from Master: op=Filter serial=113268 05:23:49 Color wheel filter change from 0 to 0 05:23:49 FLIGetFilterPos err=0 currentPosition=0 05:23:49 FLIGetStepsRemaining err=0 RemainingSteps=0 05:23:49 Filter is already there-color wheel unchanged 05:23:49 Received message from Master: op=Shutter serial=113269 05:23:49 Shutter LASER open 05:23:50 Received message from Camera: op=State serial=113271 05:23:50 GetSingleValue result=40 Value=cccccccc 05:23:50 SkyScan query 05:23:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:23:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:50 Parameters OK 05:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:50 Set A/D data flow result=40 05:23:50 Set A/D channel type result=40 05:23:50 Set A/D encoding result=40 05:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:50 Set channel filter=0.000000e+000 result=40 05:23:50 Config A/D Result=40 05:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:50 Get A/D filter: -9.255963e+061 result=40 05:23:50 Get A/D value=-858993460 result=40 05:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:50 Parameters OK 05:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:50 Set A/D data flow result=40 05:23:50 Set A/D channel type result=40 05:23:50 Set A/D encoding result=40 05:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:50 Set channel filter=0.000000e+000 result=40 05:23:50 Config A/D Result=40 05:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:50 Get A/D filter: -9.255963e+061 result=40 05:23:50 Get A/D value=-858993460 result=40 05:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:23:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:23:50 Aux= 05:23:50 Message to Camera, serial 113271 queued [UTC 2019-3-5 05:23:50] 05:23:59 Received message from Master: op=Shutter serial=113281 05:23:59 Shutter LASER close 05:23:59 Received message from Master: op=PointingHead serial=113285 05:23:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:23:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:23:59 Point started: ret=0 05:23:59 point_skyscan result=0 05:24:00 Check angles 05:24:00 SkyScan query 05:24:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.8<-21520 Statuses=0008 0009 05:24:01 Msec=0 True Az=112.995 Ze=-142.8 Az status=0008 Ze status=0009 05:24:01 Check angles 05:24:01 SkyScan query 05:24:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 05:24:02 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 05:24:02 Check angles 05:24:02 SkyScan query 05:24:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.905<-18727 Statuses=0008 0009 05:24:02 Msec=1500 True Az=112.995 Ze=-100.905 Az status=0008 Ze status=0009 05:24:02 Check angles 05:24:02 SkyScan query 05:24:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.95<-17330 Statuses=0008 0009 05:24:03 Msec=2250 True Az=112.995 Ze=-79.95 Az status=0008 Ze status=0009 05:24:03 Check angles 05:24:03 SkyScan query 05:24:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.01<-15934 Statuses=0008 0009 05:24:04 Msec=3000 True Az=112.995 Ze=-59.01 Az status=0008 Ze status=0009 05:24:04 Check angles 05:24:04 SkyScan query 05:24:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 05:24:05 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 05:24:05 Check angles 05:24:05 SkyScan query 05:24:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.085<-13139 Statuses=0008 0009 05:24:05 Msec=4500 True Az=112.995 Ze=-17.085 Az status=0008 Ze status=0009 05:24:05 Check angles 05:24:05 SkyScan query 05:24:06 SkyScan query done: ret=0 az=112.995<-7533 ze=3.885<-11741 Statuses=0008 0009 05:24:06 Msec=5250 True Az=112.995 Ze=3.885 Az status=0008 Ze status=0009 05:24:06 Check angles 05:24:06 SkyScan query 05:24:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:24:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:24:07 Message to Master queued w/err=0: serial=113285 error=0 05:24:12 Received message from Master: op=Filter serial=113286 05:24:12 Color wheel filter change from 0 to 0 05:24:12 FLIGetFilterPos err=0 currentPosition=0 05:24:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:24:12 Filter is already there-color wheel unchanged 05:24:12 Received message from Master: op=Shutter serial=113287 05:24:12 Shutter LASER close 05:24:12 Received message from Camera: op=State serial=113289 05:24:12 GetSingleValue result=40 Value=cccccccc 05:24:12 SkyScan query 05:24:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:24:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:13 Parameters OK 05:24:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:13 Set A/D data flow result=40 05:24:13 Set A/D channel type result=40 05:24:13 Set A/D encoding result=40 05:24:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:13 Set channel filter=0.000000e+000 result=40 05:24:13 Config A/D Result=40 05:24:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:13 Get A/D filter: -9.255963e+061 result=40 05:24:13 Get A/D value=-858993460 result=40 05:24:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:13 Parameters OK 05:24:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:13 Set A/D data flow result=40 05:24:13 Set A/D channel type result=40 05:24:13 Set A/D encoding result=40 05:24:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:13 Set channel filter=0.000000e+000 result=40 05:24:13 Config A/D Result=40 05:24:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:13 Get A/D filter: -9.255963e+061 result=40 05:24:13 Get A/D value=-858993460 result=40 05:24:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:24:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:24:13 Aux= 05:24:13 Message to Camera, serial 113289 queued 05:24:50 Received message from Master: op=PointingHead serial=113302 05:24:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:24:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:24:50 Point started: ret=0 05:24:50 point_skyscan result=0 05:24:51 Check angles 05:24:51 SkyScan query 05:24:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:24:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:24:51 Message to Master queued w/err=0: serial=113302 error=0 05:24:56 Received message from Master: op=Filter serial=113303 05:24:56 Color wheel filter change from 0 to 0 05:24:56 FLIGetFilterPos err=0 currentPosition=0 05:24:56 FLIGetStepsRemaining err=0 RemainingSteps=0 05:24:56 Filter is already there-color wheel unchanged 05:24:56 Received message from Master: op=Shutter serial=113304 05:24:56 Shutter LASER close 05:24:56 Received message from Camera: op=State serial=113306 05:24:56 GetSingleValue result=40 Value=cccccccc 05:24:56 SkyScan query 05:24:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:24:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:57 Parameters OK 05:24:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:57 Set A/D data flow result=40 05:24:57 Set A/D channel type result=40 05:24:57 Set A/D encoding result=40 05:24:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:57 Set channel filter=0.000000e+000 result=40 05:24:57 Config A/D Result=40 05:24:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:57 Get A/D filter: -9.255963e+061 result=40 05:24:57 Get A/D value=-858993460 result=40 05:24:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:57 Parameters OK 05:24:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:57 Set A/D data flow result=40 05:24:57 Set A/D channel type result=40 05:24:57 Set A/D encoding result=40 05:24:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:57 Set channel filter=0.000000e+000 result=40 05:24:57 Config A/D Result=40 05:24:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:57 Get A/D filter: -9.255963e+061 result=40 05:24:57 Get A/D value=-858993460 result=40 05:24:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:24:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:24:57 Aux= 05:24:57 Message to Camera, serial 113306 queued 05:25:34 Received message from Master: op=PointingHead serial=113319 05:25:34 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:25:34 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:25:34 Point started: ret=0 05:25:34 point_skyscan result=0 05:25:35 Check angles 05:25:35 SkyScan query 05:25:36 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 05:25:36 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 05:25:36 Check angles 05:25:36 SkyScan query 05:25:36 SkyScan query done: ret=0 az=153.555<-10237 ze=-6.495<-12433 Statuses=0009 0008 05:25:36 Msec=750 True Az=153.555 Ze=-6.495 Az status=0009 Ze status=0008 05:25:36 Check angles 05:25:36 SkyScan query 05:25:37 SkyScan query done: ret=0 az=171.465<-11431 ze=-6.495<-12433 Statuses=0009 0008 05:25:37 Msec=1500 True Az=171.465 Ze=-6.495 Az status=0009 Ze status=0008 05:25:37 Check angles 05:25:37 SkyScan query 05:25:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:25:38 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:25:38 Message to Master queued w/err=0: serial=113319 error=0 05:25:43 Received message from Master: op=Filter serial=113320 05:25:43 Color wheel filter change from 0 to 0 05:25:43 FLIGetFilterPos err=0 currentPosition=0 05:25:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:43 Filter is already there-color wheel unchanged 05:25:43 Received message from Master: op=Shutter serial=113321 05:25:43 Shutter LASER close 05:25:43 Received message from Camera: op=State serial=113323 05:25:43 GetSingleValue result=40 Value=cccccccc 05:25:43 SkyScan query 05:25:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:25:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:44 Parameters OK 05:25:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:44 Set A/D data flow result=40 05:25:44 Set A/D channel type result=40 05:25:44 Set A/D encoding result=40 05:25:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:44 Set channel filter=0.000000e+000 result=40 05:25:44 Config A/D Result=40 05:25:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:44 Get A/D filter: -9.255963e+061 result=40 05:25:44 Get A/D value=-858993460 result=40 05:25:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:44 Parameters OK 05:25:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:44 Set A/D data flow result=40 05:25:44 Set A/D channel type result=40 05:25:44 Set A/D encoding result=40 05:25:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:44 Set channel filter=0.000000e+000 result=40 05:25:44 Config A/D Result=40 05:25:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:44 Get A/D filter: -9.255963e+061 result=40 05:25:44 Get A/D value=-858993460 result=40 05:25:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:44 Aux= 05:25:44 Message to Camera, serial 113323 queued 05:26:20 Received message from Master: op=PointingHead serial=113336 05:26:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:26:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:26:21 Point started: ret=0 05:26:21 point_skyscan result=0 05:26:21 Check angles 05:26:21 SkyScan query 05:26:22 SkyScan query done: ret=0 az=153.075<-10205 ze=6.51<-11566 Statuses=0009 0008 05:26:22 Msec=0 True Az=153.075 Ze=6.51 Az status=0009 Ze status=0008 05:26:22 Check angles 05:26:22 SkyScan query 05:26:23 SkyScan query done: ret=0 az=135.63<-9042 ze=6.495<-11567 Statuses=0009 0008 05:26:23 Msec=750 True Az=135.63 Ze=6.495 Az status=0009 Ze status=0008 05:26:23 Check angles 05:26:23 SkyScan query 05:26:24 SkyScan query done: ret=0 az=118.125<-7875 ze=6.495<-11567 Statuses=0009 0008 05:26:24 Msec=1500 True Az=118.125 Ze=6.495 Az status=0009 Ze status=0008 05:26:24 Check angles 05:26:24 SkyScan query 05:26:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:26:24 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:26:24 Message to Master queued w/err=0: serial=113336 error=0 05:26:29 Received message from Master: op=Filter serial=113337 05:26:29 Color wheel filter change from 0 to 0 05:26:29 FLIGetFilterPos err=0 currentPosition=0 05:26:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:26:29 Filter is already there-color wheel unchanged 05:26:29 Received message from Master: op=Shutter serial=113338 05:26:29 Shutter LASER close 05:26:30 Received message from Camera: op=State serial=113340 05:26:30 GetSingleValue result=40 Value=cccccccc 05:26:30 SkyScan query 05:26:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:26:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:30 Parameters OK 05:26:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:30 Set A/D data flow result=40 05:26:30 Set A/D channel type result=40 05:26:30 Set A/D encoding result=40 05:26:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:30 Set channel filter=0.000000e+000 result=40 05:26:30 Config A/D Result=40 05:26:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:30 Get A/D filter: -9.255963e+061 result=40 05:26:30 Get A/D value=-858993460 result=40 05:26:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:30 Parameters OK 05:26:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:30 Set A/D data flow result=40 05:26:30 Set A/D channel type result=40 05:26:30 Set A/D encoding result=40 05:26:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:30 Set channel filter=0.000000e+000 result=40 05:26:30 Config A/D Result=40 05:26:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:30 Get A/D filter: -9.255963e+061 result=40 05:26:30 Get A/D value=-858993460 result=40 05:26:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:26:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:26:30 Aux= 05:26:30 Message to Camera, serial 113340 queued 05:27:06 Received message from Master: op=PointingHead serial=113352 05:27:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:27:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:27:06 Point started: ret=0 05:27:06 point_skyscan result=0 05:27:07 Check angles 05:27:07 SkyScan query 05:27:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 05:27:08 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 05:27:08 Check angles 05:27:08 SkyScan query 05:27:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 05:27:08 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 05:27:09 Check angles 05:27:09 SkyScan query 05:27:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.28<-16352 Statuses=0008 0009 05:27:09 Msec=1500 True Az=112.995 Ze=-65.28 Az status=0008 Ze status=0009 05:27:09 Check angles 05:27:09 SkyScan query 05:27:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.25<-17750 Statuses=0008 0009 05:27:10 Msec=2250 True Az=112.995 Ze=-86.25 Az status=0008 Ze status=0009 05:27:10 Check angles 05:27:10 SkyScan query 05:27:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.175<-19145 Statuses=0008 0009 05:27:11 Msec=3000 True Az=112.995 Ze=-107.175 Az status=0008 Ze status=0009 05:27:11 Check angles 05:27:11 SkyScan query 05:27:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.13<-20542 Statuses=0008 0009 05:27:11 Msec=3750 True Az=112.995 Ze=-128.13 Az status=0008 Ze status=0009 05:27:12 Check angles 05:27:12 SkyScan query 05:27:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.085<-21939 Statuses=0008 0009 05:27:12 Msec=4500 True Az=112.995 Ze=-149.085 Az status=0008 Ze status=0009 05:27:12 Check angles 05:27:12 SkyScan query 05:27:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.04<-23336 Statuses=0008 0009 05:27:13 Msec=5250 True Az=112.995 Ze=-170.04 Az status=0008 Ze status=0009 05:27:13 Check angles 05:27:13 SkyScan query 05:27:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:27:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:27:14 Message to Master queued w/err=0: serial=113352 error=0 05:27:19 Received message from Master: op=Filter serial=113353 05:27:19 Color wheel filter change from 0 to 0 05:27:19 FLIGetFilterPos err=0 currentPosition=0 05:27:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:27:19 Filter is already there-color wheel unchanged 05:27:19 Received message from Master: op=Shutter serial=113354 05:27:19 Shutter LASER open 05:27:19 Received message from Camera: op=State serial=113356 05:27:19 GetSingleValue result=40 Value=cccccccc 05:27:19 SkyScan query 05:27:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:27:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:20 Parameters OK 05:27:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:20 Set A/D data flow result=40 05:27:20 Set A/D channel type result=40 05:27:20 Set A/D encoding result=40 05:27:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:20 Set channel filter=0.000000e+000 result=40 05:27:20 Config A/D Result=40 05:27:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:20 Get A/D filter: -9.255963e+061 result=40 05:27:20 Get A/D value=-858993460 result=40 05:27:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:20 Parameters OK 05:27:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:20 Set A/D data flow result=40 05:27:20 Set A/D channel type result=40 05:27:20 Set A/D encoding result=40 05:27:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:20 Set channel filter=0.000000e+000 result=40 05:27:20 Config A/D Result=40 05:27:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:20 Get A/D filter: -9.255963e+061 result=40 05:27:20 Get A/D value=-858993460 result=40 05:27:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:27:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:27:20 Aux= 05:27:20 Message to Camera, serial 113356 queued 05:27:28 Received message from Master: op=Shutter serial=113366 05:27:28 Shutter LASER close 05:27:28 Received message from Master: op=PointingHead serial=113370 05:27:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:27:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:27:29 Point started: ret=0 05:27:29 point_skyscan result=0 05:27:30 Check angles 05:27:30 SkyScan query 05:27:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 05:27:30 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 05:27:30 Check angles 05:27:30 SkyScan query 05:27:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.205<-20147 Statuses=0008 0009 05:27:31 Msec=750 True Az=112.995 Ze=-122.205 Az status=0008 Ze status=0009 05:27:31 Check angles 05:27:31 SkyScan query 05:27:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.265<-18751 Statuses=0008 0009 05:27:32 Msec=1500 True Az=112.995 Ze=-101.265 Az status=0008 Ze status=0009 05:27:32 Check angles 05:27:32 SkyScan query 05:27:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.295<-17353 Statuses=0008 0009 05:27:32 Msec=2250 True Az=112.995 Ze=-80.295 Az status=0008 Ze status=0009 05:27:33 Check angles 05:27:33 SkyScan query 05:27:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.355<-15957 Statuses=0008 0009 05:27:33 Msec=3000 True Az=112.995 Ze=-59.355 Az status=0008 Ze status=0009 05:27:33 Check angles 05:27:33 SkyScan query 05:27:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.385<-14559 Statuses=0008 0009 05:27:34 Msec=3750 True Az=112.995 Ze=-38.385 Az status=0008 Ze status=0009 05:27:34 Check angles 05:27:34 SkyScan query 05:27:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.445<-13163 Statuses=0008 0009 05:27:35 Msec=4500 True Az=112.995 Ze=-17.445 Az status=0008 Ze status=0009 05:27:35 Check angles 05:27:35 SkyScan query 05:27:35 SkyScan query done: ret=0 az=112.995<-7533 ze=3.54<-11764 Statuses=0008 0009 05:27:35 Msec=5250 True Az=112.995 Ze=3.54 Az status=0008 Ze status=0009 05:27:36 Check angles 05:27:36 SkyScan query 05:27:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:27:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:27:36 Message to Master queued w/err=0: serial=113370 error=0 05:27:41 Received message from Master: op=Filter serial=113371 05:27:41 Color wheel filter change from 0 to 0 05:27:41 FLIGetFilterPos err=0 currentPosition=0 05:27:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:27:41 Filter is already there-color wheel unchanged 05:27:41 Received message from Master: op=Shutter serial=113372 05:27:41 Shutter LASER close 05:27:42 Received message from Camera: op=State serial=113374 05:27:42 GetSingleValue result=40 Value=cccccccc 05:27:42 SkyScan query 05:27:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:27:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:42 Parameters OK 05:27:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:42 Set A/D data flow result=40 05:27:42 Set A/D channel type result=40 05:27:42 Set A/D encoding result=40 05:27:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:42 Set channel filter=0.000000e+000 result=40 05:27:42 Config A/D Result=40 05:27:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:42 Get A/D filter: -9.255963e+061 result=40 05:27:42 Get A/D value=-858993460 result=40 05:27:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:42 Parameters OK 05:27:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:42 Set A/D data flow result=40 05:27:42 Set A/D channel type result=40 05:27:42 Set A/D encoding result=40 05:27:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:42 Set channel filter=0.000000e+000 result=40 05:27:42 Config A/D Result=40 05:27:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:42 Get A/D filter: -9.255963e+061 result=40 05:27:42 Get A/D value=-858993460 result=40 05:27:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:27:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:27:42 Aux= 05:27:42 Message to Camera, serial 113374 queued 05:28:19 Received message from Master: op=PointingHead serial=113387 05:28:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:28:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:28:19 Point started: ret=0 05:28:19 point_skyscan result=0 05:28:20 Check angles 05:28:20 SkyScan query 05:28:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:28:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:28:21 Message to Master queued w/err=0: serial=113387 error=0 05:28:26 Received message from Master: op=Filter serial=113388 05:28:26 Color wheel filter change from 0 to 0 05:28:26 FLIGetFilterPos err=0 currentPosition=0 05:28:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:26 Filter is already there-color wheel unchanged 05:28:26 Received message from Master: op=Shutter serial=113389 05:28:26 Shutter LASER close 05:28:26 Received message from Camera: op=State serial=113391 05:28:26 GetSingleValue result=40 Value=cccccccc 05:28:26 SkyScan query 05:28:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:28:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:26 Parameters OK 05:28:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:26 Set A/D data flow result=40 05:28:26 Set A/D channel type result=40 05:28:26 Set A/D encoding result=40 05:28:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:26 Set channel filter=0.000000e+000 result=40 05:28:26 Config A/D Result=40 05:28:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:26 Get A/D filter: -9.255963e+061 result=40 05:28:26 Get A/D value=-858993460 result=40 05:28:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:26 Parameters OK 05:28:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:26 Set A/D data flow result=40 05:28:26 Set A/D channel type result=40 05:28:26 Set A/D encoding result=40 05:28:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:26 Set channel filter=0.000000e+000 result=40 05:28:26 Config A/D Result=40 05:28:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:26 Get A/D filter: -9.255963e+061 result=40 05:28:26 Get A/D value=-858993460 result=40 05:28:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:26 Aux= 05:28:26 Message to Camera, serial 113391 queued 05:29:03 Received message from Master: op=PointingHead serial=113404 05:29:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:29:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:29:04 Point started: ret=0 05:29:04 point_skyscan result=0 05:29:04 Check angles 05:29:04 SkyScan query 05:29:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:29:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:29:05 Message to Master queued w/err=0: serial=113404 error=0 05:29:10 Received message from Master: op=Filter serial=113405 05:29:10 Color wheel filter change from 0 to 0 05:29:10 FLIGetFilterPos err=0 currentPosition=0 05:29:10 FLIGetStepsRemaining err=0 RemainingSteps=0 05:29:10 Filter is already there-color wheel unchanged 05:29:10 Received message from Master: op=Shutter serial=113406 05:29:10 Shutter LASER close 05:29:10 Received message from Camera: op=State serial=113408 05:29:10 GetSingleValue result=40 Value=cccccccc 05:29:10 SkyScan query 05:29:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:29:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:11 Parameters OK 05:29:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:11 Set A/D data flow result=40 05:29:11 Set A/D channel type result=40 05:29:11 Set A/D encoding result=40 05:29:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:11 Set channel filter=0.000000e+000 result=40 05:29:11 Config A/D Result=40 05:29:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:11 Get A/D filter: -9.255963e+061 result=40 05:29:11 Get A/D value=-858993460 result=40 05:29:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:11 Parameters OK 05:29:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:11 Set A/D data flow result=40 05:29:11 Set A/D channel type result=40 05:29:11 Set A/D encoding result=40 05:29:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:11 Set channel filter=0.000000e+000 result=40 05:29:11 Config A/D Result=40 05:29:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:11 Get A/D filter: -9.255963e+061 result=40 05:29:11 Get A/D value=-858993460 result=40 05:29:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:29:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:29:11 Aux= 05:29:11 Message to Camera, serial 113408 queued 05:29:48 Received message from Master: op=PointingHead serial=113421 05:29:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:29:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:29:48 Point started: ret=0 05:29:48 point_skyscan result=0 05:29:49 Check angles 05:29:49 SkyScan query 05:29:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:29:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:29:49 Message to Master queued w/err=0: serial=113421 error=0 05:29:54 Received message from Master: op=Filter serial=113422 05:29:54 Color wheel filter change from 0 to 0 05:29:54 FLIGetFilterPos err=0 currentPosition=0 05:29:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:29:54 Filter is already there-color wheel unchanged 05:29:54 Received message from Master: op=Shutter serial=113423 05:29:54 Shutter LASER close 05:29:55 Received message from Camera: op=State serial=113425 05:29:55 GetSingleValue result=40 Value=cccccccc 05:29:55 SkyScan query 05:29:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:29:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:55 Parameters OK 05:29:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:55 Set A/D data flow result=40 05:29:55 Set A/D channel type result=40 05:29:55 Set A/D encoding result=40 05:29:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:55 Set channel filter=0.000000e+000 result=40 05:29:55 Config A/D Result=40 05:29:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:55 Get A/D filter: -9.255963e+061 result=40 05:29:55 Get A/D value=-858993460 result=40 05:29:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:55 Parameters OK 05:29:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:55 Set A/D data flow result=40 05:29:55 Set A/D channel type result=40 05:29:55 Set A/D encoding result=40 05:29:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:55 Set channel filter=0.000000e+000 result=40 05:29:55 Config A/D Result=40 05:29:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:55 Get A/D filter: -9.255963e+061 result=40 05:29:55 Get A/D value=-858993460 result=40 05:29:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:29:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:29:55 Aux= 05:29:55 Message to Camera, serial 113425 queued 05:30:32 Received message from Master: op=PointingHead serial=113438 05:30:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:30:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:30:32 Point started: ret=0 05:30:32 point_skyscan result=0 05:30:33 Check angles 05:30:33 SkyScan query 05:30:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 05:30:34 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 05:30:34 Check angles 05:30:34 SkyScan query 05:30:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 05:30:34 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 05:30:35 Check angles 05:30:35 SkyScan query 05:30:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.535<-16369 Statuses=0008 0009 05:30:35 Msec=1500 True Az=112.995 Ze=-65.535 Az status=0008 Ze status=0009 05:30:35 Check angles 05:30:35 SkyScan query 05:30:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.49<-17766 Statuses=0008 0009 05:30:36 Msec=2250 True Az=112.995 Ze=-86.49 Az status=0008 Ze status=0009 05:30:36 Check angles 05:30:36 SkyScan query 05:30:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.88<-19192 Statuses=0008 0009 05:30:37 Msec=3000 True Az=112.995 Ze=-107.88 Az status=0008 Ze status=0009 05:30:37 Check angles 05:30:37 SkyScan query 05:30:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.27<-20618 Statuses=0008 0009 05:30:37 Msec=3750 True Az=112.995 Ze=-129.27 Az status=0008 Ze status=0009 05:30:38 Check angles 05:30:38 SkyScan query 05:30:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.24<-22016 Statuses=0008 0009 05:30:38 Msec=4500 True Az=112.995 Ze=-150.24 Az status=0008 Ze status=0009 05:30:38 Check angles 05:30:38 SkyScan query 05:30:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.36<-23424 Statuses=0008 0009 05:30:39 Msec=5250 True Az=112.995 Ze=-171.36 Az status=0008 Ze status=0009 05:30:39 Check angles 05:30:39 SkyScan query 05:30:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:30:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:30:40 Message to Master queued w/err=0: serial=113438 error=0 05:30:45 Received message from Master: op=Filter serial=113439 05:30:45 Color wheel filter change from 0 to 0 05:30:45 FLIGetFilterPos err=0 currentPosition=0 05:30:45 FLIGetStepsRemaining err=0 RemainingSteps=0 05:30:45 Filter is already there-color wheel unchanged 05:30:45 Received message from Master: op=Shutter serial=113440 05:30:45 Shutter LASER open 05:30:45 Received message from Camera: op=State serial=113442 05:30:45 GetSingleValue result=40 Value=cccccccc 05:30:45 SkyScan query 05:30:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:30:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:46 Parameters OK 05:30:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:46 Set A/D data flow result=40 05:30:46 Set A/D channel type result=40 05:30:46 Set A/D encoding result=40 05:30:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:46 Set channel filter=0.000000e+000 result=40 05:30:46 Config A/D Result=40 05:30:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:46 Get A/D filter: -9.255963e+061 result=40 05:30:46 Get A/D value=-858993460 result=40 05:30:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:46 Parameters OK 05:30:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:46 Set A/D data flow result=40 05:30:46 Set A/D channel type result=40 05:30:46 Set A/D encoding result=40 05:30:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:46 Set channel filter=0.000000e+000 result=40 05:30:46 Config A/D Result=40 05:30:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:46 Get A/D filter: -9.255963e+061 result=40 05:30:46 Get A/D value=-858993460 result=40 05:30:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:30:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:30:46 Aux= 05:30:46 Message to Camera, serial 113442 queued 05:30:54 Received message from Master: op=Shutter serial=113452 05:30:54 Shutter LASER close 05:30:55 Received message from Master: op=PointingHead serial=113456 05:30:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:30:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:30:55 Point started: ret=0 05:30:55 point_skyscan result=0 05:30:56 Check angles 05:30:56 SkyScan query 05:30:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 05:30:56 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 05:30:57 Check angles 05:30:57 SkyScan query 05:30:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 05:30:57 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 05:30:57 Check angles 05:30:57 SkyScan query 05:30:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 05:30:58 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 05:30:58 Check angles 05:30:58 SkyScan query 05:30:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 05:30:59 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 05:30:59 Check angles 05:30:59 SkyScan query 05:30:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.95<-15930 Statuses=0008 0009 05:30:59 Msec=3000 True Az=112.995 Ze=-58.95 Az status=0008 Ze status=0009 05:31:00 Check angles 05:31:00 SkyScan query 05:31:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.04<-14536 Statuses=0008 0009 05:31:00 Msec=3750 True Az=112.995 Ze=-38.04 Az status=0008 Ze status=0009 05:31:00 Check angles 05:31:00 SkyScan query 05:31:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.115<-13141 Statuses=0008 0009 05:31:01 Msec=4500 True Az=112.995 Ze=-17.115 Az status=0008 Ze status=0009 05:31:01 Check angles 05:31:01 SkyScan query 05:31:02 SkyScan query done: ret=0 az=112.995<-7533 ze=3.855<-11743 Statuses=0008 0009 05:31:02 Msec=5250 True Az=112.995 Ze=3.855 Az status=0008 Ze status=0009 05:31:02 Check angles 05:31:02 SkyScan query 05:31:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:31:02 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:31:02 Message to Master queued w/err=0: serial=113456 error=0 05:31:07 Received message from Master: op=Filter serial=113457 05:31:07 Color wheel filter change from 0 to 0 05:31:07 FLIGetFilterPos err=0 currentPosition=0 05:31:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:07 Filter is already there-color wheel unchanged 05:31:08 Received message from Master: op=Shutter serial=113458 05:31:08 Shutter LASER close 05:31:08 Received message from Camera: op=State serial=113460 05:31:08 GetSingleValue result=40 Value=cccccccc 05:31:08 SkyScan query 05:31:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:31:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:08 Parameters OK 05:31:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:08 Set A/D data flow result=40 05:31:08 Set A/D channel type result=40 05:31:08 Set A/D encoding result=40 05:31:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:08 Set channel filter=0.000000e+000 result=40 05:31:08 Config A/D Result=40 05:31:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:08 Get A/D filter: -9.255963e+061 result=40 05:31:08 Get A/D value=-858993460 result=40 05:31:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:08 Parameters OK 05:31:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:08 Set A/D data flow result=40 05:31:08 Set A/D channel type result=40 05:31:08 Set A/D encoding result=40 05:31:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:08 Set channel filter=0.000000e+000 result=40 05:31:08 Config A/D Result=40 05:31:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:08 Get A/D filter: -9.255963e+061 result=40 05:31:08 Get A/D value=-858993460 result=40 05:31:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:08 Aux= 05:31:08 Message to Camera, serial 113460 queued 05:31:45 Received message from Master: op=PointingHead serial=113473 05:31:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:31:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:31:45 Point started: ret=0 05:31:45 point_skyscan result=0 05:31:46 Check angles 05:31:46 SkyScan query 05:31:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:31:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:31:47 Message to Master queued w/err=0: serial=113473 error=0 05:31:52 Received message from Master: op=Filter serial=113474 05:31:52 Color wheel filter change from 0 to 0 05:31:52 FLIGetFilterPos err=0 currentPosition=0 05:31:52 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:52 Filter is already there-color wheel unchanged 05:31:52 Received message from Master: op=Shutter serial=113475 05:31:52 Shutter LASER close 05:31:52 Received message from Camera: op=State serial=113477 05:31:52 GetSingleValue result=40 Value=cccccccc 05:31:52 SkyScan query 05:31:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:31:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:53 Parameters OK 05:31:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:53 Set A/D data flow result=40 05:31:53 Set A/D channel type result=40 05:31:53 Set A/D encoding result=40 05:31:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:53 Set channel filter=0.000000e+000 result=40 05:31:53 Config A/D Result=40 05:31:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:53 Get A/D filter: -9.255963e+061 result=40 05:31:53 Get A/D value=-858993460 result=40 05:31:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:53 Parameters OK 05:31:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:53 Set A/D data flow result=40 05:31:53 Set A/D channel type result=40 05:31:53 Set A/D encoding result=40 05:31:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:53 Set channel filter=0.000000e+000 result=40 05:31:53 Config A/D Result=40 05:31:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:53 Get A/D filter: -9.255963e+061 result=40 05:31:53 Get A/D value=-858993460 result=40 05:31:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:53 Aux= 05:31:53 Message to Camera, serial 113477 queued 05:32:29 Received message from Master: op=PointingHead serial=113490 05:32:29 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:32:29 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:32:30 Point started: ret=0 05:32:30 point_skyscan result=0 05:32:31 Check angles 05:32:31 SkyScan query 05:32:31 SkyScan query done: ret=0 az=135.75<-9050 ze=-6.51<-12434 Statuses=0009 0008 05:32:31 Msec=0 True Az=135.75 Ze=-6.51 Az status=0009 Ze status=0008 05:32:31 Check angles 05:32:31 SkyScan query 05:32:32 SkyScan query done: ret=0 az=153.27<-10218 ze=-6.495<-12433 Statuses=0009 0008 05:32:32 Msec=750 True Az=153.27 Ze=-6.495 Az status=0009 Ze status=0008 05:32:32 Check angles 05:32:32 SkyScan query 05:32:33 SkyScan query done: ret=0 az=170.775<-11385 ze=-6.495<-12433 Statuses=0009 0008 05:32:33 Msec=1500 True Az=170.775 Ze=-6.495 Az status=0009 Ze status=0008 05:32:33 Check angles 05:32:33 SkyScan query 05:32:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:32:33 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:32:33 Message to Master queued w/err=0: serial=113490 error=0 05:32:38 Received message from Master: op=Filter serial=113491 05:32:38 Color wheel filter change from 0 to 0 05:32:38 FLIGetFilterPos err=0 currentPosition=0 05:32:38 FLIGetStepsRemaining err=0 RemainingSteps=0 05:32:38 Filter is already there-color wheel unchanged 05:32:39 Received message from Master: op=Shutter serial=113492 05:32:39 Shutter LASER close 05:32:39 Received message from Camera: op=State serial=113494 05:32:39 GetSingleValue result=40 Value=cccccccc 05:32:39 SkyScan query 05:32:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:32:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:39 Parameters OK 05:32:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:39 Set A/D data flow result=40 05:32:39 Set A/D channel type result=40 05:32:39 Set A/D encoding result=40 05:32:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:39 Set channel filter=0.000000e+000 result=40 05:32:39 Config A/D Result=40 05:32:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:39 Get A/D filter: -9.255963e+061 result=40 05:32:39 Get A/D value=-858993460 result=40 05:32:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:39 Parameters OK 05:32:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:39 Set A/D data flow result=40 05:32:39 Set A/D channel type result=40 05:32:39 Set A/D encoding result=40 05:32:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:39 Set channel filter=0.000000e+000 result=40 05:32:39 Config A/D Result=40 05:32:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:39 Get A/D filter: -9.255963e+061 result=40 05:32:39 Get A/D value=-858993460 result=40 05:32:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:32:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:32:39 Aux= 05:32:39 Message to Camera, serial 113494 queued 05:33:16 Received message from Master: op=PointingHead serial=113507 05:33:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:33:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:33:16 Point started: ret=0 05:33:16 point_skyscan result=0 05:33:17 Check angles 05:33:17 SkyScan query 05:33:18 SkyScan query done: ret=0 az=153.045<-10203 ze=6.51<-11566 Statuses=0009 0008 05:33:18 Msec=0 True Az=153.045 Ze=6.51 Az status=0009 Ze status=0008 05:33:18 Check angles 05:33:18 SkyScan query 05:33:18 SkyScan query done: ret=0 az=135.6<-9040 ze=6.495<-11567 Statuses=0009 0008 05:33:18 Msec=750 True Az=135.6 Ze=6.495 Az status=0009 Ze status=0008 05:33:19 Check angles 05:33:19 SkyScan query 05:33:19 SkyScan query done: ret=0 az=118.095<-7873 ze=6.495<-11567 Statuses=0009 0008 05:33:19 Msec=1500 True Az=118.095 Ze=6.495 Az status=0009 Ze status=0008 05:33:19 Check angles 05:33:19 SkyScan query 05:33:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:33:20 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:33:20 Message to Master queued w/err=0: serial=113507 error=0 05:33:25 Received message from Master: op=Filter serial=113508 05:33:25 Color wheel filter change from 0 to 0 05:33:25 FLIGetFilterPos err=0 currentPosition=0 05:33:25 FLIGetStepsRemaining err=0 RemainingSteps=0 05:33:25 Filter is already there-color wheel unchanged 05:33:25 Received message from Master: op=Shutter serial=113509 05:33:25 Shutter LASER close 05:33:25 Received message from Camera: op=State serial=113511 05:33:25 GetSingleValue result=40 Value=cccccccc 05:33:25 SkyScan query 05:33:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:33:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:26 Parameters OK 05:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:26 Set A/D data flow result=40 05:33:26 Set A/D channel type result=40 05:33:26 Set A/D encoding result=40 05:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:26 Set channel filter=0.000000e+000 result=40 05:33:26 Config A/D Result=40 05:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:26 Get A/D filter: -9.255963e+061 result=40 05:33:26 Get A/D value=-858993460 result=40 05:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:26 Parameters OK 05:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:26 Set A/D data flow result=40 05:33:26 Set A/D channel type result=40 05:33:26 Set A/D encoding result=40 05:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:26 Set channel filter=0.000000e+000 result=40 05:33:26 Config A/D Result=40 05:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:26 Get A/D filter: -9.255963e+061 result=40 05:33:26 Get A/D value=-858993460 result=40 05:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:33:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:33:26 Aux= 05:33:26 Message to Camera, serial 113511 queued 05:33:38 Received message from Master: op=Identify serial=113512 05:34:03 Received message from Master: op=PointingHead serial=113527 05:34:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:34:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:34:03 Point started: ret=0 05:34:03 point_skyscan result=0 05:34:04 Check angles 05:34:04 SkyScan query 05:34:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 05:34:04 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 05:34:04 Check angles 05:34:04 SkyScan query 05:34:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.25<-14950 Statuses=0008 0009 05:34:05 Msec=750 True Az=112.995 Ze=-44.25 Az status=0008 Ze status=0009 05:34:05 Check angles 05:34:05 SkyScan query 05:34:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.16<-16344 Statuses=0008 0009 05:34:06 Msec=1500 True Az=112.995 Ze=-65.16 Az status=0008 Ze status=0009 05:34:06 Check angles 05:34:06 SkyScan query 05:34:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.13<-17742 Statuses=0008 0009 05:34:06 Msec=2250 True Az=112.995 Ze=-86.13 Az status=0008 Ze status=0009 05:34:07 Check angles 05:34:07 SkyScan query 05:34:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.07<-19138 Statuses=0008 0009 05:34:07 Msec=3000 True Az=112.995 Ze=-107.07 Az status=0008 Ze status=0009 05:34:07 Check angles 05:34:07 SkyScan query 05:34:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.025<-20535 Statuses=0008 0009 05:34:08 Msec=3750 True Az=112.995 Ze=-128.025 Az status=0008 Ze status=0009 05:34:08 Check angles 05:34:08 SkyScan query 05:34:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.965<-21931 Statuses=0008 0009 05:34:09 Msec=4500 True Az=112.995 Ze=-148.965 Az status=0008 Ze status=0009 05:34:09 Check angles 05:34:09 SkyScan query 05:34:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.935<-23329 Statuses=0008 0009 05:34:09 Msec=5250 True Az=112.995 Ze=-169.935 Az status=0008 Ze status=0009 05:34:10 Check angles 05:34:10 SkyScan query 05:34:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:34:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:34:10 Message to Master queued w/err=0: serial=113527 error=0 05:34:15 Received message from Master: op=Filter serial=113528 05:34:15 Color wheel filter change from 0 to 0 05:34:15 FLIGetFilterPos err=0 currentPosition=0 05:34:15 FLIGetStepsRemaining err=0 RemainingSteps=0 05:34:15 Filter is already there-color wheel unchanged 05:34:15 Received message from Master: op=Shutter serial=113529 05:34:15 Shutter LASER open 05:34:16 Received message from Camera: op=State serial=113531 05:34:16 GetSingleValue result=40 Value=cccccccc 05:34:16 SkyScan query 05:34:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:34:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:16 Parameters OK 05:34:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:16 Set A/D data flow result=40 05:34:16 Set A/D channel type result=40 05:34:16 Set A/D encoding result=40 05:34:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:16 Set channel filter=0.000000e+000 result=40 05:34:16 Config A/D Result=40 05:34:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:16 Get A/D filter: -9.255963e+061 result=40 05:34:16 Get A/D value=-858993460 result=40 05:34:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:16 Parameters OK 05:34:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:16 Set A/D data flow result=40 [UTC 2019-3-5 05:34:16] 05:34:16 Set A/D channel type result=40 05:34:16 Set A/D encoding result=40 05:34:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:16 Set channel filter=0.000000e+000 result=40 05:34:16 Config A/D Result=40 05:34:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:16 Get A/D filter: -9.255963e+061 result=40 05:34:16 Get A/D value=-858993460 result=40 05:34:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:34:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:34:16 Aux= 05:34:16 Message to Camera, serial 113531 queued 05:34:25 Received message from Master: op=Shutter serial=113541 05:34:25 Shutter LASER close 05:34:25 Received message from Master: op=PointingHead serial=113545 05:34:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:34:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:34:25 Point started: ret=0 05:34:25 point_skyscan result=0 05:34:26 Check angles 05:34:26 SkyScan query 05:34:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 05:34:27 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 05:34:27 Check angles 05:34:27 SkyScan query 05:34:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.545<-20103 Statuses=0008 0009 05:34:27 Msec=750 True Az=112.995 Ze=-121.545 Az status=0008 Ze status=0009 05:34:28 Check angles 05:34:28 SkyScan query 05:34:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.62<-18708 Statuses=0008 0009 05:34:28 Msec=1500 True Az=112.995 Ze=-100.62 Az status=0008 Ze status=0009 05:34:28 Check angles 05:34:28 SkyScan query 05:34:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.65<-17310 Statuses=0008 0009 05:34:29 Msec=2250 True Az=112.995 Ze=-79.65 Az status=0008 Ze status=0009 05:34:29 Check angles 05:34:29 SkyScan query 05:34:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.71<-15914 Statuses=0008 0009 05:34:30 Msec=3000 True Az=112.995 Ze=-58.71 Az status=0008 Ze status=0009 05:34:30 Check angles 05:34:30 SkyScan query 05:34:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.32<-14488 Statuses=0008 0009 05:34:30 Msec=3750 True Az=112.995 Ze=-37.32 Az status=0008 Ze status=0009 05:34:31 Check angles 05:34:31 SkyScan query 05:34:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.335<-13089 Statuses=0008 0009 05:34:31 Msec=4500 True Az=112.995 Ze=-16.335 Az status=0008 Ze status=0009 05:34:31 Check angles 05:34:31 SkyScan query 05:34:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.5<-11700 Statuses=0008 0009 05:34:32 Msec=5250 True Az=112.995 Ze=4.5 Az status=0008 Ze status=0009 05:34:32 Check angles 05:34:32 SkyScan query 05:34:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:34:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:34:33 Message to Master queued w/err=0: serial=113545 error=0 05:34:38 Received message from Master: op=Filter serial=113546 05:34:38 Color wheel filter change from 0 to 0 05:34:38 FLIGetFilterPos err=0 currentPosition=0 05:34:38 FLIGetStepsRemaining err=0 RemainingSteps=0 05:34:38 Filter is already there-color wheel unchanged 05:34:38 Received message from Master: op=Shutter serial=113547 05:34:38 Shutter LASER close 05:34:38 Received message from Camera: op=State serial=113549 05:34:38 GetSingleValue result=40 Value=cccccccc 05:34:38 SkyScan query 05:34:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:34:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:39 Parameters OK 05:34:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:39 Set A/D data flow result=40 05:34:39 Set A/D channel type result=40 05:34:39 Set A/D encoding result=40 05:34:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:39 Set channel filter=0.000000e+000 result=40 05:34:39 Config A/D Result=40 05:34:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:39 Get A/D filter: -9.255963e+061 result=40 05:34:39 Get A/D value=-858993460 result=40 05:34:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:39 Parameters OK 05:34:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:39 Set A/D data flow result=40 05:34:39 Set A/D channel type result=40 05:34:39 Set A/D encoding result=40 05:34:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:39 Set channel filter=0.000000e+000 result=40 05:34:39 Config A/D Result=40 05:34:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:39 Get A/D filter: -9.255963e+061 result=40 05:34:39 Get A/D value=-858993460 result=40 05:34:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:34:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:34:39 Aux= 05:34:39 Message to Camera, serial 113549 queued 05:35:15 Received message from Master: op=PointingHead serial=113562 05:35:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:35:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:35:16 Point started: ret=0 05:35:16 point_skyscan result=0 05:35:17 Check angles 05:35:17 SkyScan query 05:35:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:35:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:35:17 Message to Master queued w/err=0: serial=113562 error=0 05:35:22 Received message from Master: op=Filter serial=113563 05:35:22 Color wheel filter change from 0 to 0 05:35:22 FLIGetFilterPos err=0 currentPosition=0 05:35:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:35:22 Filter is already there-color wheel unchanged 05:35:22 Received message from Master: op=Shutter serial=113564 05:35:22 Shutter LASER close 05:35:22 Received message from Camera: op=State serial=113566 05:35:22 GetSingleValue result=40 Value=cccccccc 05:35:22 SkyScan query 05:35:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:35:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:23 Parameters OK 05:35:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:23 Set A/D data flow result=40 05:35:23 Set A/D channel type result=40 05:35:23 Set A/D encoding result=40 05:35:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:23 Set channel filter=0.000000e+000 result=40 05:35:23 Config A/D Result=40 05:35:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:23 Get A/D filter: -9.255963e+061 result=40 05:35:23 Get A/D value=-858993460 result=40 05:35:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:23 Parameters OK 05:35:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:23 Set A/D data flow result=40 05:35:23 Set A/D channel type result=40 05:35:23 Set A/D encoding result=40 05:35:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:23 Set channel filter=0.000000e+000 result=40 05:35:23 Config A/D Result=40 05:35:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:23 Get A/D filter: -9.255963e+061 result=40 05:35:23 Get A/D value=-858993460 result=40 05:35:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:35:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:35:23 Aux= 05:35:23 Message to Camera, serial 113566 queued 05:36:00 Received message from Master: op=PointingHead serial=113579 05:36:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:36:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:36:00 Point started: ret=0 05:36:00 point_skyscan result=0 05:36:01 Check angles 05:36:01 SkyScan query 05:36:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:36:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:36:01 Message to Master queued w/err=0: serial=113579 error=0 05:36:06 Received message from Master: op=Filter serial=113580 05:36:06 Color wheel filter change from 0 to 0 05:36:06 FLIGetFilterPos err=0 currentPosition=0 05:36:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:36:06 Filter is already there-color wheel unchanged 05:36:07 Received message from Master: op=Shutter serial=113581 05:36:07 Shutter LASER close 05:36:07 Received message from Camera: op=State serial=113583 05:36:07 GetSingleValue result=40 Value=cccccccc 05:36:07 SkyScan query 05:36:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:36:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:07 Parameters OK 05:36:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:07 Set A/D data flow result=40 05:36:07 Set A/D channel type result=40 05:36:07 Set A/D encoding result=40 05:36:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:07 Set channel filter=0.000000e+000 result=40 05:36:07 Config A/D Result=40 05:36:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:07 Get A/D filter: -9.255963e+061 result=40 05:36:07 Get A/D value=-858993460 result=40 05:36:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:07 Parameters OK 05:36:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:07 Set A/D data flow result=40 05:36:07 Set A/D channel type result=40 05:36:07 Set A/D encoding result=40 05:36:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:07 Set channel filter=0.000000e+000 result=40 05:36:07 Config A/D Result=40 05:36:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:07 Get A/D filter: -9.255963e+061 result=40 05:36:07 Get A/D value=-858993460 result=40 05:36:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:36:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:36:07 Aux= 05:36:07 Message to Camera, serial 113583 queued 05:36:44 Received message from Master: op=PointingHead serial=113596 05:36:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:36:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:36:44 Point started: ret=0 05:36:44 point_skyscan result=0 05:36:45 Check angles 05:36:45 SkyScan query 05:36:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:36:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:36:46 Message to Master queued w/err=0: serial=113596 error=0 05:36:51 Received message from Master: op=Filter serial=113597 05:36:51 Color wheel filter change from 0 to 0 05:36:51 FLIGetFilterPos err=0 currentPosition=0 05:36:51 FLIGetStepsRemaining err=0 RemainingSteps=0 05:36:51 Filter is already there-color wheel unchanged 05:36:51 Received message from Master: op=Shutter serial=113598 05:36:51 Shutter LASER close 05:36:51 Received message from Camera: op=State serial=113600 05:36:51 GetSingleValue result=40 Value=cccccccc 05:36:51 SkyScan query 05:36:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:36:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:52 Parameters OK 05:36:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:52 Set A/D data flow result=40 05:36:52 Set A/D channel type result=40 05:36:52 Set A/D encoding result=40 05:36:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:52 Set channel filter=0.000000e+000 result=40 05:36:52 Config A/D Result=40 05:36:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:52 Get A/D filter: -9.255963e+061 result=40 05:36:52 Get A/D value=-858993460 result=40 05:36:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:52 Parameters OK 05:36:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:52 Set A/D data flow result=40 05:36:52 Set A/D channel type result=40 05:36:52 Set A/D encoding result=40 05:36:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:52 Set channel filter=0.000000e+000 result=40 05:36:52 Config A/D Result=40 05:36:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:52 Get A/D filter: -9.255963e+061 result=40 05:36:52 Get A/D value=-858993460 result=40 05:36:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:36:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:36:52 Aux= 05:36:52 Message to Camera, serial 113600 queued 05:37:28 Received message from Master: op=PointingHead serial=113613 05:37:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:37:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:37:29 Point started: ret=0 05:37:29 point_skyscan result=0 05:37:29 Check angles 05:37:29 SkyScan query 05:37:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 05:37:30 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 05:37:30 Check angles 05:37:30 SkyScan query 05:37:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 05:37:31 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 05:37:31 Check angles 05:37:31 SkyScan query 05:37:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.715<-16381 Statuses=0008 0009 05:37:32 Msec=1500 True Az=112.995 Ze=-65.715 Az status=0008 Ze status=0009 05:37:32 Check angles 05:37:32 SkyScan query 05:37:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.64<-17776 Statuses=0008 0009 05:37:32 Msec=2250 True Az=112.995 Ze=-86.64 Az status=0008 Ze status=0009 05:37:32 Check angles 05:37:32 SkyScan query 05:37:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 05:37:33 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 05:37:33 Check angles 05:37:33 SkyScan query 05:37:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.55<-20570 Statuses=0008 0009 05:37:34 Msec=3750 True Az=112.995 Ze=-128.55 Az status=0008 Ze status=0009 05:37:34 Check angles 05:37:34 SkyScan query 05:37:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.52<-21968 Statuses=0008 0009 05:37:35 Msec=4500 True Az=112.995 Ze=-149.52 Az status=0008 Ze status=0009 05:37:35 Check angles 05:37:35 SkyScan query 05:37:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.46<-23364 Statuses=0008 0009 05:37:35 Msec=5250 True Az=112.995 Ze=-170.46 Az status=0008 Ze status=0009 05:37:35 Check angles 05:37:35 SkyScan query 05:37:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:37:36 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:37:36 Message to Master queued w/err=0: serial=113613 error=0 05:37:41 Received message from Master: op=Filter serial=113614 05:37:41 Color wheel filter change from 0 to 0 05:37:41 FLIGetFilterPos err=0 currentPosition=0 05:37:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:41 Filter is already there-color wheel unchanged 05:37:41 Received message from Master: op=Shutter serial=113615 05:37:41 Shutter LASER open 05:37:41 Received message from Camera: op=State serial=113617 05:37:41 GetSingleValue result=40 Value=cccccccc 05:37:41 SkyScan query 05:37:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:37:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:42 Parameters OK 05:37:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:42 Set A/D data flow result=40 05:37:42 Set A/D channel type result=40 05:37:42 Set A/D encoding result=40 05:37:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:42 Set channel filter=0.000000e+000 result=40 05:37:42 Config A/D Result=40 05:37:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:42 Get A/D filter: -9.255963e+061 result=40 05:37:42 Get A/D value=-858993460 result=40 05:37:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:42 Parameters OK 05:37:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:42 Set A/D data flow result=40 05:37:42 Set A/D channel type result=40 05:37:42 Set A/D encoding result=40 05:37:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:42 Set channel filter=0.000000e+000 result=40 05:37:42 Config A/D Result=40 05:37:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:42 Get A/D filter: -9.255963e+061 result=40 05:37:42 Get A/D value=-858993460 result=40 05:37:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:37:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:37:42 Aux= 05:37:42 Message to Camera, serial 113617 queued 05:37:50 Received message from Master: op=Shutter serial=113627 05:37:50 Shutter LASER close 05:37:51 Received message from Master: op=PointingHead serial=113631 05:37:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:37:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:37:51 Point started: ret=0 05:37:51 point_skyscan result=0 05:37:52 Check angles 05:37:52 SkyScan query 05:37:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 05:37:53 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 05:37:53 Check angles 05:37:53 SkyScan query 05:37:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.28<-20152 Statuses=0008 0009 05:37:53 Msec=750 True Az=112.995 Ze=-122.28 Az status=0008 Ze status=0009 05:37:54 Check angles 05:37:54 SkyScan query 05:37:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.325<-18755 Statuses=0008 0009 05:37:54 Msec=1500 True Az=112.995 Ze=-101.325 Az status=0008 Ze status=0009 05:37:54 Check angles 05:37:54 SkyScan query 05:37:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.935<-17329 Statuses=0008 0009 05:37:55 Msec=2250 True Az=112.995 Ze=-79.935 Az status=0008 Ze status=0009 05:37:55 Check angles 05:37:55 SkyScan query 05:37:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.995<-15933 Statuses=0008 0009 05:37:56 Msec=3000 True Az=112.995 Ze=-58.995 Az status=0008 Ze status=0009 05:37:56 Check angles 05:37:56 SkyScan query 05:37:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.98<-14532 Statuses=0008 0009 05:37:56 Msec=3750 True Az=112.995 Ze=-37.98 Az status=0008 Ze status=0009 05:37:57 Check angles 05:37:57 SkyScan query 05:37:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.605<-13107 Statuses=0008 0009 05:37:57 Msec=4500 True Az=112.995 Ze=-16.605 Az status=0008 Ze status=0009 05:37:57 Check angles 05:37:57 SkyScan query 05:37:58 SkyScan query done: ret=0 az=112.995<-7533 ze=4.32<-11712 Statuses=0008 0009 05:37:58 Msec=5250 True Az=112.995 Ze=4.32 Az status=0008 Ze status=0009 05:37:58 Check angles 05:37:58 SkyScan query 05:37:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:37:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:37:59 Message to Master queued w/err=0: serial=113631 error=0 05:38:04 Received message from Master: op=Filter serial=113632 05:38:04 Color wheel filter change from 0 to 0 05:38:04 FLIGetFilterPos err=0 currentPosition=0 05:38:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:38:04 Filter is already there-color wheel unchanged 05:38:04 Received message from Master: op=Shutter serial=113633 05:38:04 Shutter LASER close 05:38:04 Received message from Camera: op=State serial=113635 05:38:04 GetSingleValue result=40 Value=cccccccc 05:38:04 SkyScan query 05:38:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:38:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:05 Parameters OK 05:38:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:05 Set A/D data flow result=40 05:38:05 Set A/D channel type result=40 05:38:05 Set A/D encoding result=40 05:38:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:05 Set channel filter=0.000000e+000 result=40 05:38:05 Config A/D Result=40 05:38:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:05 Get A/D filter: -9.255963e+061 result=40 05:38:05 Get A/D value=-858993460 result=40 05:38:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:05 Parameters OK 05:38:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:05 Set A/D data flow result=40 05:38:05 Set A/D channel type result=40 05:38:05 Set A/D encoding result=40 05:38:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:05 Set channel filter=0.000000e+000 result=40 05:38:05 Config A/D Result=40 05:38:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:05 Get A/D filter: -9.255963e+061 result=40 05:38:05 Get A/D value=-858993460 result=40 05:38:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:38:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:38:05 Aux= 05:38:05 Message to Camera, serial 113635 queued 05:38:41 Received message from Master: op=PointingHead serial=113648 05:38:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:38:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:38:42 Point started: ret=0 05:38:42 point_skyscan result=0 05:38:43 Check angles 05:38:43 SkyScan query 05:38:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:38:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:38:43 Message to Master queued w/err=0: serial=113648 error=0 05:38:48 Received message from Master: op=Filter serial=113649 05:38:48 Color wheel filter change from 0 to 0 05:38:48 FLIGetFilterPos err=0 currentPosition=0 05:38:48 FLIGetStepsRemaining err=0 RemainingSteps=0 05:38:48 Filter is already there-color wheel unchanged 05:38:48 Received message from Master: op=Shutter serial=113650 05:38:48 Shutter LASER close 05:38:48 Received message from Camera: op=State serial=113652 05:38:48 GetSingleValue result=40 Value=cccccccc 05:38:48 SkyScan query 05:38:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:38:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:49 Parameters OK 05:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:49 Set A/D data flow result=40 05:38:49 Set A/D channel type result=40 05:38:49 Set A/D encoding result=40 05:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:49 Set channel filter=0.000000e+000 result=40 05:38:49 Config A/D Result=40 05:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:49 Get A/D filter: -9.255963e+061 result=40 05:38:49 Get A/D value=-858993460 result=40 05:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:49 Parameters OK 05:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:49 Set A/D data flow result=40 05:38:49 Set A/D channel type result=40 05:38:49 Set A/D encoding result=40 05:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:49 Set channel filter=0.000000e+000 result=40 05:38:49 Config A/D Result=40 05:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:49 Get A/D filter: -9.255963e+061 result=40 05:38:49 Get A/D value=-858993460 result=40 05:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:38:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:38:49 Aux= 05:38:49 Message to Camera, serial 113652 queued 05:39:26 Received message from Master: op=PointingHead serial=113665 05:39:26 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:39:26 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:39:26 Point started: ret=0 05:39:26 point_skyscan result=0 05:39:27 Check angles 05:39:27 SkyScan query 05:39:27 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 05:39:27 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 05:39:28 Check angles 05:39:28 SkyScan query 05:39:28 SkyScan query done: ret=0 az=153.735<-10249 ze=-6.495<-12433 Statuses=0009 0008 05:39:28 Msec=750 True Az=153.735 Ze=-6.495 Az status=0009 Ze status=0008 05:39:28 Check angles 05:39:28 SkyScan query 05:39:29 SkyScan query done: ret=0 az=171.18<-11412 ze=-6.495<-12433 Statuses=0009 0008 05:39:29 Msec=1500 True Az=171.18 Ze=-6.495 Az status=0009 Ze status=0008 05:39:29 Check angles 05:39:29 SkyScan query 05:39:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:39:30 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:39:30 Message to Master queued w/err=0: serial=113665 error=0 05:39:35 Received message from Master: op=Filter serial=113666 05:39:35 Color wheel filter change from 0 to 0 05:39:35 FLIGetFilterPos err=0 currentPosition=0 05:39:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:39:35 Filter is already there-color wheel unchanged 05:39:35 Received message from Master: op=Shutter serial=113667 05:39:35 Shutter LASER close 05:39:35 Received message from Camera: op=State serial=113669 05:39:35 GetSingleValue result=40 Value=cccccccc 05:39:35 SkyScan query 05:39:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:39:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:35 Parameters OK 05:39:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:35 Set A/D data flow result=40 05:39:35 Set A/D channel type result=40 05:39:35 Set A/D encoding result=40 05:39:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:35 Set channel filter=0.000000e+000 result=40 05:39:35 Config A/D Result=40 05:39:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:35 Get A/D filter: -9.255963e+061 result=40 05:39:35 Get A/D value=-858993460 result=40 05:39:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:35 Parameters OK 05:39:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:35 Set A/D data flow result=40 05:39:35 Set A/D channel type result=40 05:39:35 Set A/D encoding result=40 05:39:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:35 Set channel filter=0.000000e+000 result=40 05:39:35 Config A/D Result=40 05:39:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:35 Get A/D filter: -9.255963e+061 result=40 05:39:35 Get A/D value=-858993460 result=40 05:39:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:39:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:39:35 Aux= 05:39:35 Message to Camera, serial 113669 queued 05:40:12 Received message from Master: op=PointingHead serial=113682 05:40:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:40:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:40:13 Point started: ret=0 05:40:13 point_skyscan result=0 05:40:13 Check angles 05:40:13 SkyScan query 05:40:14 SkyScan query done: ret=0 az=153.135<-10209 ze=6.51<-11566 Statuses=0009 0008 05:40:14 Msec=0 True Az=153.135 Ze=6.51 Az status=0009 Ze status=0008 05:40:14 Check angles 05:40:14 SkyScan query 05:40:15 SkyScan query done: ret=0 az=135.69<-9046 ze=6.495<-11567 Statuses=0009 0008 05:40:15 Msec=750 True Az=135.69 Ze=6.495 Az status=0009 Ze status=0008 05:40:15 Check angles 05:40:15 SkyScan query 05:40:15 SkyScan query done: ret=0 az=117.795<-7853 ze=6.495<-11567 Statuses=0009 0008 05:40:15 Msec=1500 True Az=117.795 Ze=6.495 Az status=0009 Ze status=0008 05:40:16 Check angles 05:40:16 SkyScan query 05:40:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:40:16 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:40:16 Message to Master queued w/err=0: serial=113682 error=0 05:40:21 Received message from Master: op=Filter serial=113683 05:40:21 Color wheel filter change from 0 to 0 05:40:21 FLIGetFilterPos err=0 currentPosition=0 05:40:21 FLIGetStepsRemaining err=0 RemainingSteps=0 05:40:21 Filter is already there-color wheel unchanged 05:40:21 Received message from Master: op=Shutter serial=113684 05:40:21 Shutter LASER close 05:40:21 Received message from Camera: op=State serial=113686 05:40:21 GetSingleValue result=40 Value=cccccccc 05:40:21 SkyScan query 05:40:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:40:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:22 Parameters OK 05:40:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:22 Set A/D data flow result=40 05:40:22 Set A/D channel type result=40 05:40:22 Set A/D encoding result=40 05:40:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:22 Set channel filter=0.000000e+000 result=40 05:40:22 Config A/D Result=40 05:40:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:22 Get A/D filter: -9.255963e+061 result=40 05:40:22 Get A/D value=-858993460 result=40 05:40:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:22 Parameters OK 05:40:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:22 Set A/D data flow result=40 05:40:22 Set A/D channel type result=40 05:40:22 Set A/D encoding result=40 05:40:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:22 Set channel filter=0.000000e+000 result=40 05:40:22 Config A/D Result=40 05:40:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:22 Get A/D filter: -9.255963e+061 result=40 05:40:22 Get A/D value=-858993460 result=40 05:40:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:40:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:40:22 Aux= 05:40:22 Message to Camera, serial 113686 queued 05:40:58 Received message from Master: op=PointingHead serial=113698 05:40:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:40:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:40:58 Point started: ret=0 05:40:58 point_skyscan result=0 05:40:59 Check angles 05:40:59 SkyScan query 05:41:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 05:41:00 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 05:41:00 Check angles 05:41:00 SkyScan query 05:41:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 05:41:00 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 05:41:01 Check angles 05:41:01 SkyScan query 05:41:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.97<-16398 Statuses=0008 0009 05:41:01 Msec=1500 True Az=112.995 Ze=-65.97 Az status=0008 Ze status=0009 05:41:01 Check angles 05:41:01 SkyScan query 05:41:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.895<-17793 Statuses=0008 0009 05:41:02 Msec=2250 True Az=112.995 Ze=-86.895 Az status=0008 Ze status=0009 05:41:02 Check angles 05:41:02 SkyScan query 05:41:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.88<-19192 Statuses=0008 0009 05:41:03 Msec=3000 True Az=112.995 Ze=-107.88 Az status=0008 Ze status=0009 05:41:03 Check angles 05:41:03 SkyScan query 05:41:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.805<-20587 Statuses=0008 0009 05:41:03 Msec=3750 True Az=112.995 Ze=-128.805 Az status=0008 Ze status=0009 05:41:04 Check angles 05:41:04 SkyScan query 05:41:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.775<-21985 Statuses=0008 0009 05:41:04 Msec=4500 True Az=112.995 Ze=-149.775 Az status=0008 Ze status=0009 05:41:04 Check angles 05:41:04 SkyScan query 05:41:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.03<-23402 Statuses=0008 0009 05:41:05 Msec=5250 True Az=112.995 Ze=-171.03 Az status=0008 Ze status=0009 05:41:05 Check angles 05:41:05 SkyScan query 05:41:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:41:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:41:06 Message to Master queued w/err=0: serial=113698 error=0 05:41:11 Received message from Master: op=Filter serial=113699 05:41:11 Color wheel filter change from 0 to 0 05:41:11 FLIGetFilterPos err=0 currentPosition=0 05:41:11 FLIGetStepsRemaining err=0 RemainingSteps=0 05:41:11 Filter is already there-color wheel unchanged 05:41:11 Received message from Master: op=Shutter serial=113700 05:41:11 Shutter LASER open 05:41:11 Received message from Camera: op=State serial=113702 05:41:11 GetSingleValue result=40 Value=cccccccc 05:41:11 SkyScan query 05:41:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:41:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:12 Parameters OK 05:41:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:12 Set A/D data flow result=40 05:41:12 Set A/D channel type result=40 05:41:12 Set A/D encoding result=40 05:41:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:12 Set channel filter=0.000000e+000 result=40 05:41:12 Config A/D Result=40 05:41:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:12 Get A/D filter: -9.255963e+061 result=40 05:41:12 Get A/D value=-858993460 result=40 05:41:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:12 Parameters OK 05:41:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:12 Set A/D data flow result=40 05:41:12 Set A/D channel type result=40 05:41:12 Set A/D encoding result=40 05:41:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:12 Set channel filter=0.000000e+000 result=40 05:41:12 Config A/D Result=40 05:41:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:12 Get A/D filter: -9.255963e+061 result=40 05:41:12 Get A/D value=-858993460 result=40 05:41:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:41:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:41:12 Aux= 05:41:12 Message to Camera, serial 113702 queued 05:41:20 Received message from Master: op=Shutter serial=113712 05:41:20 Shutter LASER close 05:41:20 Received message from Master: op=PointingHead serial=113716 05:41:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:41:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:41:21 Point started: ret=0 05:41:21 point_skyscan result=0 05:41:22 Check angles 05:41:22 SkyScan query 05:41:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 05:41:22 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 05:41:22 Check angles 05:41:22 SkyScan query 05:41:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 05:41:23 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 05:41:23 Check angles 05:41:23 SkyScan query 05:41:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.055<-18737 Statuses=0008 0009 05:41:24 Msec=1500 True Az=112.995 Ze=-101.055 Az status=0008 Ze status=0009 05:41:24 Check angles 05:41:24 SkyScan query 05:41:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.1<-17340 Statuses=0008 0009 05:41:24 Msec=2250 True Az=112.995 Ze=-80.1 Az status=0008 Ze status=0009 05:41:25 Check angles 05:41:25 SkyScan query 05:41:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.16<-15944 Statuses=0008 0009 05:41:25 Msec=3000 True Az=112.995 Ze=-59.16 Az status=0008 Ze status=0009 05:41:25 Check angles 05:41:25 SkyScan query 05:41:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.145<-14543 Statuses=0008 0009 05:41:26 Msec=3750 True Az=112.995 Ze=-38.145 Az status=0008 Ze status=0009 05:41:26 Check angles 05:41:26 SkyScan query 05:41:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.205<-13147 Statuses=0008 0009 05:41:27 Msec=4500 True Az=112.995 Ze=-17.205 Az status=0008 Ze status=0009 05:41:27 Check angles 05:41:27 SkyScan query 05:41:27 SkyScan query done: ret=0 az=112.995<-7533 ze=4.185<-11721 Statuses=0008 0009 05:41:27 Msec=5250 True Az=112.995 Ze=4.185 Az status=0008 Ze status=0009 05:41:28 Check angles 05:41:28 SkyScan query 05:41:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:41:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:41:28 Message to Master queued w/err=0: serial=113716 error=0 05:41:33 Received message from Master: op=Filter serial=113717 05:41:33 Color wheel filter change from 0 to 0 05:41:33 FLIGetFilterPos err=0 currentPosition=0 05:41:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:41:33 Filter is already there-color wheel unchanged 05:41:33 Received message from Master: op=Shutter serial=113718 05:41:33 Shutter LASER close 05:41:34 Received message from Camera: op=State serial=113720 05:41:34 GetSingleValue result=40 Value=cccccccc 05:41:34 SkyScan query 05:41:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:41:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:34 Parameters OK 05:41:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:34 Set A/D data flow result=40 05:41:34 Set A/D channel type result=40 05:41:34 Set A/D encoding result=40 05:41:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:34 Set channel filter=0.000000e+000 result=40 05:41:34 Config A/D Result=40 05:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:34 Get A/D filter: -9.255963e+061 result=40 05:41:34 Get A/D value=-858993460 result=40 05:41:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:34 Parameters OK 05:41:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:34 Set A/D data flow result=40 05:41:34 Set A/D channel type result=40 05:41:34 Set A/D encoding result=40 05:41:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:34 Set channel filter=0.000000e+000 result=40 05:41:34 Config A/D Result=40 05:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:34 Get A/D filter: -9.255963e+061 result=40 05:41:34 Get A/D value=-858993460 result=40 05:41:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:41:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:41:34 Aux= 05:41:34 Message to Camera, serial 113720 queued 05:42:11 Received message from Master: op=PointingHead serial=113733 05:42:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:42:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:42:11 Point started: ret=0 05:42:11 point_skyscan result=0 05:42:12 Check angles 05:42:12 SkyScan query 05:42:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:42:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:42:13 Message to Master queued w/err=0: serial=113733 error=0 05:42:18 Received message from Master: op=Filter serial=113734 05:42:18 Color wheel filter change from 0 to 0 05:42:18 FLIGetFilterPos err=0 currentPosition=0 05:42:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:42:18 Filter is already there-color wheel unchanged 05:42:18 Received message from Master: op=Shutter serial=113735 05:42:18 Shutter LASER close 05:42:18 Received message from Camera: op=State serial=113737 05:42:18 GetSingleValue result=40 Value=cccccccc 05:42:18 SkyScan query 05:42:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:42:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:18 Parameters OK 05:42:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:18 Set A/D data flow result=40 05:42:18 Set A/D channel type result=40 05:42:18 Set A/D encoding result=40 05:42:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:18 Set channel filter=0.000000e+000 result=40 05:42:18 Config A/D Result=40 05:42:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:18 Get A/D filter: -9.255963e+061 result=40 05:42:18 Get A/D value=-858993460 result=40 05:42:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:18 Parameters OK 05:42:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:18 Set A/D data flow result=40 05:42:18 Set A/D channel type result=40 05:42:18 Set A/D encoding result=40 05:42:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:18 Set channel filter=0.000000e+000 result=40 05:42:18 Config A/D Result=40 05:42:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:18 Get A/D filter: -9.255963e+061 result=40 05:42:18 Get A/D value=-858993460 result=40 05:42:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:42:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:42:18 Aux= 05:42:18 Message to Camera, serial 113737 queued 05:42:55 Received message from Master: op=PointingHead serial=113750 05:42:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:42:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:42:56 Point started: ret=0 05:42:56 point_skyscan result=0 05:42:56 Check angles 05:42:56 SkyScan query 05:42:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:42:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:42:57 Message to Master queued w/err=0: serial=113750 error=0 05:43:02 Received message from Master: op=Filter serial=113751 05:43:02 Color wheel filter change from 0 to 0 05:43:02 FLIGetFilterPos err=0 currentPosition=0 05:43:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:02 Filter is already there-color wheel unchanged 05:43:02 Received message from Master: op=Shutter serial=113752 05:43:02 Shutter LASER close 05:43:02 Received message from Camera: op=State serial=113754 05:43:02 GetSingleValue result=40 Value=cccccccc 05:43:02 SkyScan query 05:43:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:43:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:03 Parameters OK 05:43:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:03 Set A/D data flow result=40 05:43:03 Set A/D channel type result=40 05:43:03 Set A/D encoding result=40 05:43:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:03 Set channel filter=0.000000e+000 result=40 05:43:03 Config A/D Result=40 05:43:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:03 Get A/D filter: -9.255963e+061 result=40 05:43:03 Get A/D value=-858993460 result=40 05:43:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:03 Parameters OK 05:43:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:03 Set A/D data flow result=40 05:43:03 Set A/D channel type result=40 05:43:03 Set A/D encoding result=40 05:43:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:03 Set channel filter=0.000000e+000 result=40 05:43:03 Config A/D Result=40 05:43:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:03 Get A/D filter: -9.255963e+061 result=40 05:43:03 Get A/D value=-858993460 result=40 05:43:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:03 Aux= 05:43:03 Message to Camera, serial 113754 queued 05:43:40 Received message from Master: op=PointingHead serial=113767 05:43:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:43:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:43:40 Point started: ret=0 05:43:40 point_skyscan result=0 05:43:41 Check angles 05:43:41 SkyScan query 05:43:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:43:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:43:41 Message to Master queued w/err=0: serial=113767 error=0 05:43:46 Received message from Master: op=Filter serial=113768 05:43:46 Color wheel filter change from 0 to 0 05:43:46 FLIGetFilterPos err=0 currentPosition=0 05:43:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:46 Filter is already there-color wheel unchanged 05:43:46 Received message from Master: op=Shutter serial=113769 05:43:46 Shutter LASER close 05:43:46 Received message from Camera: op=State serial=113771 05:43:46 GetSingleValue result=40 Value=cccccccc 05:43:46 SkyScan query 05:43:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:43:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:47 Parameters OK 05:43:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:47 Set A/D data flow result=40 05:43:47 Set A/D channel type result=40 05:43:47 Set A/D encoding result=40 05:43:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:47 Set channel filter=0.000000e+000 result=40 05:43:47 Config A/D Result=40 05:43:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:47 Get A/D filter: -9.255963e+061 result=40 05:43:47 Get A/D value=-858993460 result=40 05:43:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:47 Parameters OK 05:43:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:47 Set A/D data flow result=40 05:43:47 Set A/D channel type result=40 05:43:47 Set A/D encoding result=40 05:43:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:47 Set channel filter=0.000000e+000 result=40 05:43:47 Config A/D Result=40 05:43:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:47 Get A/D filter: -9.255963e+061 result=40 05:43:47 Get A/D value=-858993460 result=40 05:43:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:47 Aux= 05:43:47 Message to Camera, serial 113771 queued [UTC 2019-3-5 05:43:50] 05:44:24 Received message from Master: op=PointingHead serial=113784 05:44:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:44:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:44:24 Point started: ret=0 05:44:24 point_skyscan result=0 05:44:25 Check angles 05:44:25 SkyScan query 05:44:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.745<-13583 Statuses=0008 0009 05:44:25 Msec=0 True Az=112.995 Ze=-23.745 Az status=0008 Ze status=0009 05:44:26 Check angles 05:44:26 SkyScan query 05:44:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.105<-15007 Statuses=0008 0009 05:44:26 Msec=750 True Az=112.995 Ze=-45.105 Az status=0008 Ze status=0009 05:44:26 Check angles 05:44:26 SkyScan query 05:44:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.06<-16404 Statuses=0008 0009 05:44:27 Msec=1500 True Az=112.995 Ze=-66.06 Az status=0008 Ze status=0009 05:44:27 Check angles 05:44:27 SkyScan query 05:44:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.015<-17801 Statuses=0008 0009 05:44:28 Msec=2250 True Az=112.995 Ze=-87.015 Az status=0008 Ze status=0009 05:44:28 Check angles 05:44:28 SkyScan query 05:44:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.985<-19199 Statuses=0008 0009 05:44:28 Msec=3000 True Az=112.995 Ze=-107.985 Az status=0008 Ze status=0009 05:44:29 Check angles 05:44:29 SkyScan query 05:44:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.375<-20625 Statuses=0008 0009 05:44:29 Msec=3750 True Az=112.995 Ze=-129.375 Az status=0008 Ze status=0009 05:44:29 Check angles 05:44:29 SkyScan query 05:44:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.36<-22024 Statuses=0008 0009 05:44:30 Msec=4500 True Az=112.995 Ze=-150.36 Az status=0008 Ze status=0009 05:44:30 Check angles 05:44:30 SkyScan query 05:44:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.12<-23408 Statuses=0008 0009 05:44:31 Msec=5250 True Az=112.995 Ze=-171.12 Az status=0008 Ze status=0009 05:44:31 Check angles 05:44:31 SkyScan query 05:44:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:44:32 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:44:32 Message to Master queued w/err=0: serial=113784 error=0 05:44:37 Received message from Master: op=Filter serial=113785 05:44:37 Color wheel filter change from 0 to 0 05:44:37 FLIGetFilterPos err=0 currentPosition=0 05:44:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:44:37 Filter is already there-color wheel unchanged 05:44:37 Received message from Master: op=Shutter serial=113786 05:44:37 Shutter LASER open 05:44:37 Received message from Camera: op=State serial=113788 05:44:37 GetSingleValue result=40 Value=cccccccc 05:44:37 SkyScan query 05:44:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:44:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:37 Parameters OK 05:44:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:37 Set A/D data flow result=40 05:44:37 Set A/D channel type result=40 05:44:37 Set A/D encoding result=40 05:44:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:37 Set channel filter=0.000000e+000 result=40 05:44:37 Config A/D Result=40 05:44:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:37 Get A/D filter: -9.255963e+061 result=40 05:44:37 Get A/D value=-858993460 result=40 05:44:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:37 Parameters OK 05:44:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:37 Set A/D data flow result=40 05:44:37 Set A/D channel type result=40 05:44:37 Set A/D encoding result=40 05:44:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:37 Set channel filter=0.000000e+000 result=40 05:44:37 Config A/D Result=40 05:44:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:37 Get A/D filter: -9.255963e+061 result=40 05:44:37 Get A/D value=-858993460 result=40 05:44:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:44:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:44:37 Aux= 05:44:37 Message to Camera, serial 113788 queued 05:44:45 Received message from Master: op=Shutter serial=113797 05:44:45 Shutter LASER close 05:44:46 Received message from Master: op=PointingHead serial=113801 05:44:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:44:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:44:46 Point started: ret=0 05:44:46 point_skyscan result=0 05:44:47 Check angles 05:44:47 SkyScan query 05:44:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.935<-21529 Statuses=0008 0009 05:44:47 Msec=0 True Az=112.995 Ze=-142.935 Az status=0008 Ze status=0009 05:44:47 Check angles 05:44:47 SkyScan query 05:44:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.965<-20131 Statuses=0008 0009 05:44:48 Msec=750 True Az=112.995 Ze=-121.965 Az status=0008 Ze status=0009 05:44:48 Check angles 05:44:48 SkyScan query 05:44:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.04<-18736 Statuses=0008 0009 05:44:49 Msec=1500 True Az=112.995 Ze=-101.04 Az status=0008 Ze status=0009 05:44:49 Check angles 05:44:49 SkyScan query 05:44:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 05:44:50 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 05:44:50 Check angles 05:44:50 SkyScan query 05:44:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 05:44:50 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 05:44:50 Check angles 05:44:50 SkyScan query 05:44:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.145<-14543 Statuses=0008 0009 05:44:51 Msec=3750 True Az=112.995 Ze=-38.145 Az status=0008 Ze status=0009 05:44:51 Check angles 05:44:51 SkyScan query 05:44:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.205<-13147 Statuses=0008 0009 05:44:52 Msec=4500 True Az=112.995 Ze=-17.205 Az status=0008 Ze status=0009 05:44:52 Check angles 05:44:52 SkyScan query 05:44:53 SkyScan query done: ret=0 az=112.995<-7533 ze=3.75<-11750 Statuses=0008 0009 05:44:53 Msec=5250 True Az=112.995 Ze=3.75 Az status=0008 Ze status=0009 05:44:53 Check angles 05:44:53 SkyScan query 05:44:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:44:53 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:44:53 Message to Master queued w/err=0: serial=113801 error=0 05:44:58 Received message from Master: op=Filter serial=113802 05:44:58 Color wheel filter change from 0 to 0 05:44:58 FLIGetFilterPos err=0 currentPosition=0 05:44:58 FLIGetStepsRemaining err=0 RemainingSteps=0 05:44:58 Filter is already there-color wheel unchanged 05:44:58 Received message from Master: op=Shutter serial=113803 05:44:58 Shutter LASER close 05:44:59 Received message from Camera: op=State serial=113805 05:44:59 GetSingleValue result=40 Value=cccccccc 05:44:59 SkyScan query 05:44:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:44:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:59 Parameters OK 05:44:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:59 Set A/D data flow result=40 05:44:59 Set A/D channel type result=40 05:44:59 Set A/D encoding result=40 05:44:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:59 Set channel filter=0.000000e+000 result=40 05:44:59 Config A/D Result=40 05:44:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:59 Get A/D filter: -9.255963e+061 result=40 05:44:59 Get A/D value=-858993460 result=40 05:44:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:59 Parameters OK 05:44:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:59 Set A/D data flow result=40 05:44:59 Set A/D channel type result=40 05:44:59 Set A/D encoding result=40 05:44:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:59 Set channel filter=0.000000e+000 result=40 05:44:59 Config A/D Result=40 05:44:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:59 Get A/D filter: -9.255963e+061 result=40 05:44:59 Get A/D value=-858993460 result=40 05:44:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:44:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:44:59 Aux= 05:44:59 Message to Camera, serial 113805 queued 05:45:36 Received message from Master: op=PointingHead serial=113818 05:45:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:45:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:45:36 Point started: ret=0 05:45:36 point_skyscan result=0 05:45:37 Check angles 05:45:37 SkyScan query 05:45:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:45:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:45:38 Message to Master queued w/err=0: serial=113818 error=0 05:45:43 Received message from Master: op=Filter serial=113819 05:45:43 Color wheel filter change from 0 to 0 05:45:43 FLIGetFilterPos err=0 currentPosition=0 05:45:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:45:43 Filter is already there-color wheel unchanged 05:45:43 Received message from Master: op=Shutter serial=113820 05:45:43 Shutter LASER close 05:45:43 Received message from Camera: op=State serial=113822 05:45:43 GetSingleValue result=40 Value=cccccccc 05:45:43 SkyScan query 05:45:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:45:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:44 Parameters OK 05:45:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:44 Set A/D data flow result=40 05:45:44 Set A/D channel type result=40 05:45:44 Set A/D encoding result=40 05:45:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:44 Set channel filter=0.000000e+000 result=40 05:45:44 Config A/D Result=40 05:45:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:44 Get A/D filter: -9.255963e+061 result=40 05:45:44 Get A/D value=-858993460 result=40 05:45:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:44 Parameters OK 05:45:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:44 Set A/D data flow result=40 05:45:44 Set A/D channel type result=40 05:45:44 Set A/D encoding result=40 05:45:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:44 Set channel filter=0.000000e+000 result=40 05:45:44 Config A/D Result=40 05:45:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:44 Get A/D filter: -9.255963e+061 result=40 05:45:44 Get A/D value=-858993460 result=40 05:45:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:45:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:45:44 Aux= 05:45:44 Message to Camera, serial 113822 queued 05:46:20 Received message from Master: op=PointingHead serial=113835 05:46:20 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:46:20 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:46:21 Point started: ret=0 05:46:21 point_skyscan result=0 05:46:21 Check angles 05:46:21 SkyScan query 05:46:22 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 05:46:22 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 05:46:22 Check angles 05:46:22 SkyScan query 05:46:23 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.495<-12433 Statuses=0009 0008 05:46:23 Msec=750 True Az=153.525 Ze=-6.495 Az status=0009 Ze status=0008 05:46:23 Check angles 05:46:23 SkyScan query 05:46:24 SkyScan query done: ret=0 az=171.105<-11407 ze=-6.495<-12433 Statuses=0009 0008 05:46:24 Msec=1500 True Az=171.105 Ze=-6.495 Az status=0009 Ze status=0008 05:46:24 Check angles 05:46:24 SkyScan query 05:46:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:46:24 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:46:24 Message to Master queued w/err=0: serial=113835 error=0 05:46:29 Received message from Master: op=Filter serial=113836 05:46:29 Color wheel filter change from 0 to 0 05:46:29 FLIGetFilterPos err=0 currentPosition=0 05:46:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:46:29 Filter is already there-color wheel unchanged 05:46:29 Received message from Master: op=Shutter serial=113837 05:46:29 Shutter LASER close 05:46:30 Received message from Camera: op=State serial=113839 05:46:30 GetSingleValue result=40 Value=cccccccc 05:46:30 SkyScan query 05:46:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:46:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:30 Parameters OK 05:46:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:30 Set A/D data flow result=40 05:46:30 Set A/D channel type result=40 05:46:30 Set A/D encoding result=40 05:46:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:30 Set channel filter=0.000000e+000 result=40 05:46:30 Config A/D Result=40 05:46:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:30 Get A/D filter: -9.255963e+061 result=40 05:46:30 Get A/D value=-858993460 result=40 05:46:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:30 Parameters OK 05:46:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:30 Set A/D data flow result=40 05:46:30 Set A/D channel type result=40 05:46:30 Set A/D encoding result=40 05:46:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:30 Set channel filter=0.000000e+000 result=40 05:46:30 Config A/D Result=40 05:46:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:30 Get A/D filter: -9.255963e+061 result=40 05:46:30 Get A/D value=-858993460 result=40 05:46:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:46:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:46:30 Aux= 05:46:30 Message to Camera, serial 113839 queued 05:47:07 Received message from Master: op=PointingHead serial=113852 05:47:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:47:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:47:07 Point started: ret=0 05:47:07 point_skyscan result=0 05:47:08 Check angles 05:47:08 SkyScan query 05:47:09 SkyScan query done: ret=0 az=153.12<-10208 ze=6.51<-11566 Statuses=0009 0008 05:47:09 Msec=0 True Az=153.12 Ze=6.51 Az status=0009 Ze status=0008 05:47:09 Check angles 05:47:09 SkyScan query 05:47:09 SkyScan query done: ret=0 az=135.645<-9043 ze=6.495<-11567 Statuses=0009 0008 05:47:09 Msec=750 True Az=135.645 Ze=6.495 Az status=0009 Ze status=0008 05:47:09 Check angles 05:47:09 SkyScan query 05:47:10 SkyScan query done: ret=0 az=118.17<-7878 ze=6.495<-11567 Statuses=0009 0008 05:47:10 Msec=1500 True Az=118.17 Ze=6.495 Az status=0009 Ze status=0008 05:47:10 Check angles 05:47:10 SkyScan query 05:47:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:47:11 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:47:11 Message to Master queued w/err=0: serial=113852 error=0 05:47:16 Received message from Master: op=Filter serial=113853 05:47:16 Color wheel filter change from 0 to 0 05:47:16 FLIGetFilterPos err=0 currentPosition=0 05:47:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:47:16 Filter is already there-color wheel unchanged 05:47:16 Received message from Master: op=Shutter serial=113854 05:47:16 Shutter LASER close 05:47:16 Received message from Camera: op=State serial=113856 05:47:16 GetSingleValue result=40 Value=cccccccc 05:47:16 SkyScan query 05:47:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:47:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:17 Parameters OK 05:47:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:17 Set A/D data flow result=40 05:47:17 Set A/D channel type result=40 05:47:17 Set A/D encoding result=40 05:47:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:17 Set channel filter=0.000000e+000 result=40 05:47:17 Config A/D Result=40 05:47:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:17 Get A/D filter: -9.255963e+061 result=40 05:47:17 Get A/D value=-858993460 result=40 05:47:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:17 Parameters OK 05:47:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:17 Set A/D data flow result=40 05:47:17 Set A/D channel type result=40 05:47:17 Set A/D encoding result=40 05:47:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:17 Set channel filter=0.000000e+000 result=40 05:47:17 Config A/D Result=40 05:47:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:17 Get A/D filter: -9.255963e+061 result=40 05:47:17 Get A/D value=-858993460 result=40 05:47:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:47:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:47:17 Aux= 05:47:17 Message to Camera, serial 113856 queued 05:47:53 Received message from Master: op=PointingHead serial=113869 05:47:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:47:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:47:54 Point started: ret=0 05:47:54 point_skyscan result=0 05:47:55 Check angles 05:47:55 SkyScan query 05:47:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.4<-13560 Statuses=0008 0009 05:47:55 Msec=0 True Az=112.995 Ze=-23.4 Az status=0008 Ze status=0009 05:47:55 Check angles 05:47:55 SkyScan query 05:47:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 05:47:56 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 05:47:56 Check angles 05:47:56 SkyScan query 05:47:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.325<-16355 Statuses=0008 0009 05:47:57 Msec=1500 True Az=112.995 Ze=-65.325 Az status=0008 Ze status=0009 05:47:57 Check angles 05:47:57 SkyScan query 05:47:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.28<-17752 Statuses=0008 0009 05:47:57 Msec=2250 True Az=112.995 Ze=-86.28 Az status=0008 Ze status=0009 05:47:58 Check angles 05:47:58 SkyScan query 05:47:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.67<-19178 Statuses=0008 0009 05:47:58 Msec=3000 True Az=112.995 Ze=-107.67 Az status=0008 Ze status=0009 05:47:58 Check angles 05:47:58 SkyScan query 05:47:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.595<-20573 Statuses=0008 0009 05:47:59 Msec=3750 True Az=112.995 Ze=-128.595 Az status=0008 Ze status=0009 05:47:59 Check angles 05:47:59 SkyScan query 05:48:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.565<-21971 Statuses=0008 0009 05:48:00 Msec=4500 True Az=112.995 Ze=-149.565 Az status=0008 Ze status=0009 05:48:00 Check angles 05:48:00 SkyScan query 05:48:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.865<-23391 Statuses=0008 0009 05:48:00 Msec=5250 True Az=112.995 Ze=-170.865 Az status=0008 Ze status=0009 05:48:01 Check angles 05:48:01 SkyScan query 05:48:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:48:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:48:01 Message to Master queued w/err=0: serial=113869 error=0 05:48:06 Received message from Master: op=Filter serial=113870 05:48:06 Color wheel filter change from 0 to 0 05:48:06 FLIGetFilterPos err=0 currentPosition=0 05:48:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:48:06 Filter is already there-color wheel unchanged 05:48:06 Received message from Master: op=Shutter serial=113871 05:48:06 Shutter LASER open 05:48:07 Received message from Camera: op=State serial=113873 05:48:07 GetSingleValue result=40 Value=cccccccc 05:48:07 SkyScan query 05:48:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:48:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:07 Parameters OK 05:48:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:07 Set A/D data flow result=40 05:48:07 Set A/D channel type result=40 05:48:07 Set A/D encoding result=40 05:48:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:07 Set channel filter=0.000000e+000 result=40 05:48:07 Config A/D Result=40 05:48:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:07 Get A/D filter: -9.255963e+061 result=40 05:48:07 Get A/D value=-858993460 result=40 05:48:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:07 Parameters OK 05:48:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:07 Set A/D data flow result=40 05:48:07 Set A/D channel type result=40 05:48:07 Set A/D encoding result=40 05:48:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:07 Set channel filter=0.000000e+000 result=40 05:48:07 Config A/D Result=40 05:48:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:07 Get A/D filter: -9.255963e+061 result=40 05:48:07 Get A/D value=-858993460 result=40 05:48:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:07 Aux= 05:48:07 Message to Camera, serial 113873 queued 05:48:16 Received message from Master: op=Shutter serial=113883 05:48:16 Shutter LASER close 05:48:16 Received message from Master: op=PointingHead serial=113887 05:48:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:48:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:48:16 Point started: ret=0 05:48:16 point_skyscan result=0 05:48:17 Check angles 05:48:17 SkyScan query 05:48:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.785<-21519 Statuses=0008 0009 05:48:18 Msec=0 True Az=112.995 Ze=-142.785 Az status=0008 Ze status=0009 05:48:18 Check angles 05:48:18 SkyScan query 05:48:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.38<-20092 Statuses=0008 0009 05:48:18 Msec=750 True Az=112.995 Ze=-121.38 Az status=0008 Ze status=0009 05:48:19 Check angles 05:48:19 SkyScan query 05:48:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.44<-18696 Statuses=0008 0009 05:48:19 Msec=1500 True Az=112.995 Ze=-100.44 Az status=0008 Ze status=0009 05:48:19 Check angles 05:48:19 SkyScan query 05:48:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.455<-17297 Statuses=0008 0009 05:48:20 Msec=2250 True Az=112.995 Ze=-79.455 Az status=0008 Ze status=0009 05:48:20 Check angles 05:48:20 SkyScan query 05:48:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.515<-15901 Statuses=0008 0009 05:48:21 Msec=3000 True Az=112.995 Ze=-58.515 Az status=0008 Ze status=0009 05:48:21 Check angles 05:48:21 SkyScan query 05:48:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.56<-14504 Statuses=0008 0009 05:48:21 Msec=3750 True Az=112.995 Ze=-37.56 Az status=0008 Ze status=0009 05:48:22 Check angles 05:48:22 SkyScan query 05:48:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.605<-13107 Statuses=0008 0009 05:48:22 Msec=4500 True Az=112.995 Ze=-16.605 Az status=0008 Ze status=0009 05:48:22 Check angles 05:48:22 SkyScan query 05:48:23 SkyScan query done: ret=0 az=113.01<-7534 ze=4.305<-11713 Statuses=0008 0009 05:48:23 Msec=5250 True Az=113.01 Ze=4.305 Az status=0008 Ze status=0009 05:48:23 Check angles 05:48:23 SkyScan query 05:48:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:48:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:48:24 Message to Master queued w/err=0: serial=113887 error=0 05:48:29 Received message from Master: op=Filter serial=113888 05:48:29 Color wheel filter change from 0 to 0 05:48:29 FLIGetFilterPos err=0 currentPosition=0 05:48:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:48:29 Filter is already there-color wheel unchanged 05:48:29 Received message from Master: op=Shutter serial=113889 05:48:29 Shutter LASER close 05:48:29 Received message from Camera: op=State serial=113891 05:48:29 GetSingleValue result=40 Value=cccccccc 05:48:29 SkyScan query 05:48:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:48:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:30 Parameters OK 05:48:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:30 Set A/D data flow result=40 05:48:30 Set A/D channel type result=40 05:48:30 Set A/D encoding result=40 05:48:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:30 Set channel filter=0.000000e+000 result=40 05:48:30 Config A/D Result=40 05:48:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:30 Get A/D filter: -9.255963e+061 result=40 05:48:30 Get A/D value=-858993460 result=40 05:48:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:30 Parameters OK 05:48:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:30 Set A/D data flow result=40 05:48:30 Set A/D channel type result=40 05:48:30 Set A/D encoding result=40 05:48:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:30 Set channel filter=0.000000e+000 result=40 05:48:30 Config A/D Result=40 05:48:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:30 Get A/D filter: -9.255963e+061 result=40 05:48:30 Get A/D value=-858993460 result=40 05:48:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:30 Aux= 05:48:30 Message to Camera, serial 113891 queued 05:49:06 Received message from Master: op=PointingHead serial=113904 05:49:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:49:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:49:07 Point started: ret=0 05:49:07 point_skyscan result=0 05:49:08 Check angles 05:49:08 SkyScan query 05:49:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:49:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:49:08 Message to Master queued w/err=0: serial=113904 error=0 05:49:13 Received message from Master: op=Filter serial=113905 05:49:13 Color wheel filter change from 0 to 0 05:49:13 FLIGetFilterPos err=0 currentPosition=0 05:49:13 FLIGetStepsRemaining err=0 RemainingSteps=0 05:49:13 Filter is already there-color wheel unchanged 05:49:13 Received message from Master: op=Shutter serial=113906 05:49:13 Shutter LASER close 05:49:13 Received message from Camera: op=State serial=113908 05:49:13 GetSingleValue result=40 Value=cccccccc 05:49:13 SkyScan query 05:49:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:49:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:14 Parameters OK 05:49:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:14 Set A/D data flow result=40 05:49:14 Set A/D channel type result=40 05:49:14 Set A/D encoding result=40 05:49:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:14 Set channel filter=0.000000e+000 result=40 05:49:14 Config A/D Result=40 05:49:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:14 Get A/D filter: -9.255963e+061 result=40 05:49:14 Get A/D value=-858993460 result=40 05:49:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:14 Parameters OK 05:49:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:14 Set A/D data flow result=40 05:49:14 Set A/D channel type result=40 05:49:14 Set A/D encoding result=40 05:49:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:14 Set channel filter=0.000000e+000 result=40 05:49:14 Config A/D Result=40 05:49:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:14 Get A/D filter: -9.255963e+061 result=40 05:49:14 Get A/D value=-858993460 result=40 05:49:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:49:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:49:14 Aux= 05:49:14 Message to Camera, serial 113908 queued 05:49:51 Received message from Master: op=PointingHead serial=113921 05:49:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:49:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:49:51 Point started: ret=0 05:49:51 point_skyscan result=0 05:49:52 Check angles 05:49:52 SkyScan query 05:49:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:49:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:49:52 Message to Master queued w/err=0: serial=113921 error=0 05:49:57 Received message from Master: op=Filter serial=113922 05:49:57 Color wheel filter change from 0 to 0 05:49:57 FLIGetFilterPos err=0 currentPosition=0 05:49:57 FLIGetStepsRemaining err=0 RemainingSteps=0 05:49:57 Filter is already there-color wheel unchanged 05:49:58 Received message from Master: op=Shutter serial=113923 05:49:58 Shutter LASER close 05:49:58 Received message from Camera: op=State serial=113925 05:49:58 GetSingleValue result=40 Value=cccccccc 05:49:58 SkyScan query 05:49:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:49:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:58 Parameters OK 05:49:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:58 Set A/D data flow result=40 05:49:58 Set A/D channel type result=40 05:49:58 Set A/D encoding result=40 05:49:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:58 Set channel filter=0.000000e+000 result=40 05:49:58 Config A/D Result=40 05:49:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:58 Get A/D filter: -9.255963e+061 result=40 05:49:58 Get A/D value=-858993460 result=40 05:49:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:58 Parameters OK 05:49:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:58 Set A/D data flow result=40 05:49:58 Set A/D channel type result=40 05:49:58 Set A/D encoding result=40 05:49:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:58 Set channel filter=0.000000e+000 result=40 05:49:58 Config A/D Result=40 05:49:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:58 Get A/D filter: -9.255963e+061 result=40 05:49:58 Get A/D value=-858993460 result=40 05:49:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:49:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:49:58 Aux= 05:49:58 Message to Camera, serial 113925 queued 05:50:35 Received message from Master: op=PointingHead serial=113938 05:50:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:50:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:50:35 Point started: ret=0 05:50:35 point_skyscan result=0 05:50:36 Check angles 05:50:36 SkyScan query 05:50:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:50:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:50:37 Message to Master queued w/err=0: serial=113938 error=0 05:50:42 Received message from Master: op=Filter serial=113939 05:50:42 Color wheel filter change from 0 to 0 05:50:42 FLIGetFilterPos err=0 currentPosition=0 05:50:42 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:42 Filter is already there-color wheel unchanged 05:50:42 Received message from Master: op=Shutter serial=113940 05:50:42 Shutter LASER close 05:50:42 Received message from Camera: op=State serial=113942 05:50:42 GetSingleValue result=40 Value=cccccccc 05:50:42 SkyScan query 05:50:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:50:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:42 Parameters OK 05:50:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:42 Set A/D data flow result=40 05:50:42 Set A/D channel type result=40 05:50:42 Set A/D encoding result=40 05:50:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:42 Set channel filter=0.000000e+000 result=40 05:50:42 Config A/D Result=40 05:50:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:42 Get A/D filter: -9.255963e+061 result=40 05:50:42 Get A/D value=-858993460 result=40 05:50:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:42 Parameters OK 05:50:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:42 Set A/D data flow result=40 05:50:42 Set A/D channel type result=40 05:50:42 Set A/D encoding result=40 05:50:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:42 Set channel filter=0.000000e+000 result=40 05:50:42 Config A/D Result=40 05:50:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:42 Get A/D filter: -9.255963e+061 result=40 05:50:42 Get A/D value=-858993460 result=40 05:50:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:50:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:50:42 Aux= 05:50:42 Message to Camera, serial 113942 queued 05:51:19 Received message from Master: op=PointingHead serial=113955 05:51:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:51:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:51:20 Point started: ret=0 05:51:20 point_skyscan result=0 05:51:20 Check angles 05:51:20 SkyScan query 05:51:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.565<-13571 Statuses=0008 0009 05:51:21 Msec=0 True Az=112.995 Ze=-23.565 Az status=0008 Ze status=0009 05:51:21 Check angles 05:51:21 SkyScan query 05:51:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.94<-14996 Statuses=0008 0009 05:51:22 Msec=750 True Az=112.995 Ze=-44.94 Az status=0008 Ze status=0009 05:51:22 Check angles 05:51:22 SkyScan query 05:51:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.91<-16394 Statuses=0008 0009 05:51:23 Msec=1500 True Az=112.995 Ze=-65.91 Az status=0008 Ze status=0009 05:51:23 Check angles 05:51:23 SkyScan query 05:51:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.835<-17789 Statuses=0008 0009 05:51:23 Msec=2250 True Az=112.995 Ze=-86.835 Az status=0008 Ze status=0009 05:51:23 Check angles 05:51:23 SkyScan query 05:51:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.255<-19217 Statuses=0008 0009 05:51:24 Msec=3000 True Az=112.995 Ze=-108.255 Az status=0008 Ze status=0009 05:51:24 Check angles 05:51:24 SkyScan query 05:51:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.225<-20615 Statuses=0008 0009 05:51:25 Msec=3750 True Az=112.995 Ze=-129.225 Az status=0008 Ze status=0009 05:51:25 Check angles 05:51:25 SkyScan query 05:51:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.18<-22012 Statuses=0008 0009 05:51:26 Msec=4500 True Az=112.995 Ze=-150.18 Az status=0008 Ze status=0009 05:51:26 Check angles 05:51:26 SkyScan query 05:51:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-171<-23400 Statuses=0008 0009 05:51:26 Msec=5250 True Az=112.995 Ze=-171 Az status=0008 Ze status=0009 05:51:26 Check angles 05:51:26 SkyScan query 05:51:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:51:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:51:27 Message to Master queued w/err=0: serial=113955 error=0 05:51:32 Received message from Master: op=Filter serial=113956 05:51:32 Color wheel filter change from 0 to 0 05:51:32 FLIGetFilterPos err=0 currentPosition=0 05:51:32 FLIGetStepsRemaining err=0 RemainingSteps=0 05:51:32 Filter is already there-color wheel unchanged 05:51:32 Received message from Master: op=Shutter serial=113957 05:51:32 Shutter LASER open 05:51:32 Received message from Camera: op=State serial=113959 05:51:32 GetSingleValue result=40 Value=cccccccc 05:51:32 SkyScan query 05:51:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:51:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:33 Parameters OK 05:51:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:33 Set A/D data flow result=40 05:51:33 Set A/D channel type result=40 05:51:33 Set A/D encoding result=40 05:51:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:33 Set channel filter=0.000000e+000 result=40 05:51:33 Config A/D Result=40 05:51:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:33 Get A/D filter: -9.255963e+061 result=40 05:51:33 Get A/D value=-858993460 result=40 05:51:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:33 Parameters OK 05:51:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:33 Set A/D data flow result=40 05:51:33 Set A/D channel type result=40 05:51:33 Set A/D encoding result=40 05:51:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:33 Set channel filter=0.000000e+000 result=40 05:51:33 Config A/D Result=40 05:51:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:33 Get A/D filter: -9.255963e+061 result=40 05:51:33 Get A/D value=-858993460 result=40 05:51:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:51:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:51:33 Aux= 05:51:33 Message to Camera, serial 113959 queued 05:51:41 Received message from Master: op=Shutter serial=113969 05:51:41 Shutter LASER close 05:51:42 Received message from Master: op=PointingHead serial=113973 05:51:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:51:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:51:42 Point started: ret=0 05:51:42 point_skyscan result=0 05:51:43 Check angles 05:51:43 SkyScan query 05:51:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.995<-21533 Statuses=0008 0009 05:51:44 Msec=0 True Az=112.995 Ze=-142.995 Az status=0008 Ze status=0009 05:51:44 Check angles 05:51:44 SkyScan query 05:51:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.92<-20128 Statuses=0008 0009 05:51:44 Msec=750 True Az=112.995 Ze=-121.92 Az status=0008 Ze status=0009 05:51:45 Check angles 05:51:45 SkyScan query 05:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 05:51:45 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 05:51:45 Check angles 05:51:45 SkyScan query 05:51:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 05:51:46 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 05:51:46 Check angles 05:51:46 SkyScan query 05:51:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 05:51:47 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 05:51:47 Check angles 05:51:47 SkyScan query 05:51:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 05:51:47 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 05:51:48 Check angles 05:51:48 SkyScan query 05:51:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 05:51:48 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 05:51:48 Check angles 05:51:48 SkyScan query 05:51:49 SkyScan query done: ret=0 az=112.995<-7533 ze=3.675<-11755 Statuses=0008 0009 05:51:49 Msec=5250 True Az=112.995 Ze=3.675 Az status=0008 Ze status=0009 05:51:49 Check angles 05:51:49 SkyScan query 05:51:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:51:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:51:50 Message to Master queued w/err=0: serial=113973 error=0 05:51:55 Received message from Master: op=Filter serial=113974 05:51:55 Color wheel filter change from 0 to 0 05:51:55 FLIGetFilterPos err=0 currentPosition=0 05:51:55 FLIGetStepsRemaining err=0 RemainingSteps=0 05:51:55 Filter is already there-color wheel unchanged 05:51:55 Received message from Master: op=Shutter serial=113975 05:51:55 Shutter LASER close 05:51:55 Received message from Camera: op=State serial=113977 05:51:55 GetSingleValue result=40 Value=cccccccc 05:51:55 SkyScan query 05:51:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:51:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:56 Parameters OK 05:51:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:56 Set A/D data flow result=40 05:51:56 Set A/D channel type result=40 05:51:56 Set A/D encoding result=40 05:51:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:56 Set channel filter=0.000000e+000 result=40 05:51:56 Config A/D Result=40 05:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:56 Get A/D filter: -9.255963e+061 result=40 05:51:56 Get A/D value=-858993460 result=40 05:51:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:56 Parameters OK 05:51:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:56 Set A/D data flow result=40 05:51:56 Set A/D channel type result=40 05:51:56 Set A/D encoding result=40 05:51:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:56 Set channel filter=0.000000e+000 result=40 05:51:56 Config A/D Result=40 05:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:56 Get A/D filter: -9.255963e+061 result=40 05:51:56 Get A/D value=-858993460 result=40 05:51:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:51:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:51:56 Aux= 05:51:56 Message to Camera, serial 113977 queued 05:52:32 Received message from Master: op=PointingHead serial=113990 05:52:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:52:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:52:33 Point started: ret=0 05:52:33 point_skyscan result=0 05:52:33 Check angles 05:52:33 SkyScan query 05:52:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:52:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:52:34 Message to Master queued w/err=0: serial=113990 error=0 05:52:39 Received message from Master: op=Filter serial=113991 05:52:39 Color wheel filter change from 0 to 0 05:52:39 FLIGetFilterPos err=0 currentPosition=0 05:52:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:52:39 Filter is already there-color wheel unchanged 05:52:39 Received message from Master: op=Shutter serial=113992 05:52:39 Shutter LASER close 05:52:39 Received message from Camera: op=State serial=113994 05:52:39 GetSingleValue result=40 Value=cccccccc 05:52:39 SkyScan query 05:52:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:52:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:40 Parameters OK 05:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:40 Set A/D data flow result=40 05:52:40 Set A/D channel type result=40 05:52:40 Set A/D encoding result=40 05:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:40 Set channel filter=0.000000e+000 result=40 05:52:40 Config A/D Result=40 05:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:40 Get A/D filter: -9.255963e+061 result=40 05:52:40 Get A/D value=-858993460 result=40 05:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:40 Parameters OK 05:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:40 Set A/D data flow result=40 05:52:40 Set A/D channel type result=40 05:52:40 Set A/D encoding result=40 05:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:40 Set channel filter=0.000000e+000 result=40 05:52:40 Config A/D Result=40 05:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:40 Get A/D filter: -9.255963e+061 result=40 05:52:40 Get A/D value=-858993460 result=40 05:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:52:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:52:40 Aux= 05:52:40 Message to Camera, serial 113994 queued 05:53:17 Received message from Master: op=PointingHead serial=114007 05:53:17 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:53:17 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:53:17 Point started: ret=0 05:53:17 point_skyscan result=0 05:53:18 Check angles 05:53:18 SkyScan query 05:53:18 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 05:53:18 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 05:53:19 Check angles 05:53:19 SkyScan query 05:53:19 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.495<-12433 Statuses=0009 0008 05:53:19 Msec=750 True Az=153.93 Ze=-6.495 Az status=0009 Ze status=0008 05:53:19 Check angles 05:53:19 SkyScan query 05:53:20 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 05:53:20 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 05:53:20 Check angles 05:53:20 SkyScan query 05:53:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:53:21 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:53:21 Message to Master queued w/err=0: serial=114007 error=0 05:53:26 Received message from Master: op=Filter serial=114008 05:53:26 Color wheel filter change from 0 to 0 05:53:26 FLIGetFilterPos err=0 currentPosition=0 05:53:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:53:26 Filter is already there-color wheel unchanged 05:53:26 Received message from Master: op=Shutter serial=114009 05:53:26 Shutter LASER close 05:53:26 Received message from Camera: op=State serial=114011 05:53:26 GetSingleValue result=40 Value=cccccccc 05:53:26 SkyScan query 05:53:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:53:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:26 Parameters OK 05:53:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:26 Set A/D data flow result=40 05:53:26 Set A/D channel type result=40 05:53:26 Set A/D encoding result=40 05:53:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:26 Set channel filter=0.000000e+000 result=40 05:53:26 Config A/D Result=40 05:53:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:26 Get A/D filter: -9.255963e+061 result=40 05:53:26 Get A/D value=-858993460 result=40 05:53:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:26 Parameters OK 05:53:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:26 Set A/D data flow result=40 05:53:26 Set A/D channel type result=40 05:53:26 Set A/D encoding result=40 05:53:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:26 Set channel filter=0.000000e+000 result=40 05:53:26 Config A/D Result=40 05:53:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:26 Get A/D filter: -9.255963e+061 result=40 05:53:26 Get A/D value=-858993460 result=40 05:53:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:53:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:53:26 Aux= 05:53:26 Message to Camera, serial 114011 queued 05:54:03 Received message from Master: op=PointingHead serial=114024 05:54:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:54:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:54:04 Point started: ret=0 05:54:04 point_skyscan result=0 05:54:04 Check angles 05:54:04 SkyScan query 05:54:05 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 05:54:05 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 05:54:05 Check angles 05:54:05 SkyScan query 05:54:06 SkyScan query done: ret=0 az=135.36<-9024 ze=6.495<-11567 Statuses=0009 0008 05:54:06 Msec=750 True Az=135.36 Ze=6.495 Az status=0009 Ze status=0008 05:54:06 Check angles 05:54:06 SkyScan query 05:54:06 SkyScan query done: ret=0 az=117.885<-7859 ze=6.495<-11567 Statuses=0009 0008 05:54:06 Msec=1500 True Az=117.885 Ze=6.495 Az status=0009 Ze status=0008 05:54:07 Check angles 05:54:07 SkyScan query 05:54:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:54:07 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:54:07 Message to Master queued w/err=0: serial=114024 error=0 05:54:12 Received message from Master: op=Filter serial=114025 05:54:12 Color wheel filter change from 0 to 0 05:54:12 FLIGetFilterPos err=0 currentPosition=0 05:54:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:54:12 Filter is already there-color wheel unchanged 05:54:12 Received message from Master: op=Shutter serial=114026 05:54:12 Shutter LASER close 05:54:12 Received message from Camera: op=State serial=114028 05:54:12 GetSingleValue result=40 Value=cccccccc 05:54:12 SkyScan query 05:54:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:54:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:13 Parameters OK 05:54:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:13 Set A/D data flow result=40 05:54:13 Set A/D channel type result=40 05:54:13 Set A/D encoding result=40 05:54:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:13 Set channel filter=0.000000e+000 result=40 05:54:13 Config A/D Result=40 05:54:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:13 Get A/D filter: -9.255963e+061 result=40 05:54:13 Get A/D value=-858993460 result=40 05:54:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:13 Parameters OK 05:54:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:13 Set A/D data flow result=40 05:54:13 Set A/D channel type result=40 [UTC 2019-3-5 05:54:13] 05:54:13 Set A/D encoding result=40 05:54:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:13 Set channel filter=0.000000e+000 result=40 05:54:13 Config A/D Result=40 05:54:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:13 Get A/D filter: -9.255963e+061 result=40 05:54:13 Get A/D value=-858993460 result=40 05:54:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:54:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:54:13 Aux= 05:54:13 Message to Camera, serial 114028 queued 05:54:49 Received message from Master: op=PointingHead serial=114040 05:54:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:54:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:54:49 Point started: ret=0 05:54:49 point_skyscan result=0 05:54:50 Check angles 05:54:50 SkyScan query 05:54:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.775<-13585 Statuses=0008 0009 05:54:51 Msec=0 True Az=112.995 Ze=-23.775 Az status=0008 Ze status=0009 05:54:51 Check angles 05:54:51 SkyScan query 05:54:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 05:54:51 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 05:54:51 Check angles 05:54:51 SkyScan query 05:54:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.685<-16379 Statuses=0008 0009 05:54:52 Msec=1500 True Az=112.995 Ze=-65.685 Az status=0008 Ze status=0009 05:54:52 Check angles 05:54:52 SkyScan query 05:54:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 05:54:53 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 05:54:53 Check angles 05:54:53 SkyScan query 05:54:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.595<-19173 Statuses=0008 0009 05:54:54 Msec=3000 True Az=112.995 Ze=-107.595 Az status=0008 Ze status=0009 05:54:54 Check angles 05:54:54 SkyScan query 05:54:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.97<-20598 Statuses=0008 0009 05:54:54 Msec=3750 True Az=112.995 Ze=-128.97 Az status=0008 Ze status=0009 05:54:54 Check angles 05:54:54 SkyScan query 05:54:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.955<-21997 Statuses=0008 0009 05:54:55 Msec=4500 True Az=112.995 Ze=-149.955 Az status=0008 Ze status=0009 05:54:55 Check angles 05:54:55 SkyScan query 05:54:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.805<-23387 Statuses=0008 0009 05:54:56 Msec=5250 True Az=112.995 Ze=-170.805 Az status=0008 Ze status=0009 05:54:56 Check angles 05:54:56 SkyScan query 05:54:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:54:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:54:57 Message to Master queued w/err=0: serial=114040 error=0 05:55:02 Received message from Master: op=Filter serial=114041 05:55:02 Color wheel filter change from 0 to 0 05:55:02 FLIGetFilterPos err=0 currentPosition=0 05:55:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:55:02 Filter is already there-color wheel unchanged 05:55:02 Received message from Master: op=Shutter serial=114042 05:55:02 Shutter LASER open 05:55:02 Received message from Camera: op=State serial=114044 05:55:02 GetSingleValue result=40 Value=cccccccc 05:55:02 SkyScan query 05:55:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:55:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:02 Parameters OK 05:55:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:02 Set A/D data flow result=40 05:55:02 Set A/D channel type result=40 05:55:02 Set A/D encoding result=40 05:55:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:02 Set channel filter=0.000000e+000 result=40 05:55:02 Config A/D Result=40 05:55:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:02 Get A/D filter: -9.255963e+061 result=40 05:55:02 Get A/D value=-858993460 result=40 05:55:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:02 Parameters OK 05:55:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:02 Set A/D data flow result=40 05:55:02 Set A/D channel type result=40 05:55:02 Set A/D encoding result=40 05:55:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:02 Set channel filter=0.000000e+000 result=40 05:55:02 Config A/D Result=40 05:55:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:02 Get A/D filter: -9.255963e+061 result=40 05:55:02 Get A/D value=-858993460 result=40 05:55:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:02 Aux= 05:55:02 Message to Camera, serial 114044 queued 05:55:11 Received message from Master: op=Shutter serial=114054 05:55:11 Shutter LASER close 05:55:11 Received message from Master: op=PointingHead serial=114058 05:55:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:55:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:55:12 Point started: ret=0 05:55:12 point_skyscan result=0 05:55:12 Check angles 05:55:12 SkyScan query 05:55:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 05:55:13 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 05:55:13 Check angles 05:55:13 SkyScan query 05:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.46<-20164 Statuses=0008 0009 05:55:14 Msec=750 True Az=112.995 Ze=-122.46 Az status=0008 Ze status=0009 05:55:14 Check angles 05:55:14 SkyScan query 05:55:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.04<-18736 Statuses=0008 0009 05:55:15 Msec=1500 True Az=112.995 Ze=-101.04 Az status=0008 Ze status=0009 05:55:15 Check angles 05:55:15 SkyScan query 05:55:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 05:55:15 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 05:55:15 Check angles 05:55:15 SkyScan query 05:55:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 05:55:16 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 05:55:16 Check angles 05:55:16 SkyScan query 05:55:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.695<-14513 Statuses=0008 0009 05:55:17 Msec=3750 True Az=112.995 Ze=-37.695 Az status=0008 Ze status=0009 05:55:17 Check angles 05:55:17 SkyScan query 05:55:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.755<-13117 Statuses=0008 0009 05:55:18 Msec=4500 True Az=112.995 Ze=-16.755 Az status=0008 Ze status=0009 05:55:18 Check angles 05:55:18 SkyScan query 05:55:18 SkyScan query done: ret=0 az=112.995<-7533 ze=4.185<-11721 Statuses=0008 0009 05:55:18 Msec=5250 True Az=112.995 Ze=4.185 Az status=0008 Ze status=0009 05:55:18 Check angles 05:55:18 SkyScan query 05:55:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:55:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:55:19 Message to Master queued w/err=0: serial=114058 error=0 05:55:24 Received message from Master: op=Filter serial=114059 05:55:24 Color wheel filter change from 0 to 0 05:55:24 FLIGetFilterPos err=0 currentPosition=0 05:55:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:55:24 Filter is already there-color wheel unchanged 05:55:24 Received message from Master: op=Shutter serial=114060 05:55:24 Shutter LASER close 05:55:24 Received message from Camera: op=State serial=114062 05:55:24 GetSingleValue result=40 Value=cccccccc 05:55:24 SkyScan query 05:55:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:55:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:25 Parameters OK 05:55:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:25 Set A/D data flow result=40 05:55:25 Set A/D channel type result=40 05:55:25 Set A/D encoding result=40 05:55:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:25 Set channel filter=0.000000e+000 result=40 05:55:25 Config A/D Result=40 05:55:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:25 Get A/D filter: -9.255963e+061 result=40 05:55:25 Get A/D value=-858993460 result=40 05:55:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:25 Parameters OK 05:55:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:25 Set A/D data flow result=40 05:55:25 Set A/D channel type result=40 05:55:25 Set A/D encoding result=40 05:55:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:25 Set channel filter=0.000000e+000 result=40 05:55:25 Config A/D Result=40 05:55:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:25 Get A/D filter: -9.255963e+061 result=40 05:55:25 Get A/D value=-858993460 result=40 05:55:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:25 Aux= 05:55:25 Message to Camera, serial 114062 queued 05:56:02 Received message from Master: op=PointingHead serial=114075 05:56:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:56:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:56:02 Point started: ret=0 05:56:02 point_skyscan result=0 05:56:03 Check angles 05:56:03 SkyScan query 05:56:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:56:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:56:03 Message to Master queued w/err=0: serial=114075 error=0 05:56:08 Received message from Master: op=Filter serial=114076 05:56:08 Color wheel filter change from 0 to 0 05:56:08 FLIGetFilterPos err=0 currentPosition=0 05:56:08 FLIGetStepsRemaining err=0 RemainingSteps=0 05:56:08 Filter is already there-color wheel unchanged 05:56:09 Received message from Master: op=Shutter serial=114077 05:56:09 Shutter LASER close 05:56:09 Received message from Camera: op=State serial=114079 05:56:09 GetSingleValue result=40 Value=cccccccc 05:56:09 SkyScan query 05:56:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:56:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:09 Parameters OK 05:56:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:09 Set A/D data flow result=40 05:56:09 Set A/D channel type result=40 05:56:09 Set A/D encoding result=40 05:56:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:09 Set channel filter=0.000000e+000 result=40 05:56:09 Config A/D Result=40 05:56:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:09 Get A/D filter: -9.255963e+061 result=40 05:56:09 Get A/D value=-858993460 result=40 05:56:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:09 Parameters OK 05:56:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:09 Set A/D data flow result=40 05:56:09 Set A/D channel type result=40 05:56:09 Set A/D encoding result=40 05:56:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:09 Set channel filter=0.000000e+000 result=40 05:56:09 Config A/D Result=40 05:56:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:09 Get A/D filter: -9.255963e+061 result=40 05:56:09 Get A/D value=-858993460 result=40 05:56:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:56:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:56:09 Aux= 05:56:09 Message to Camera, serial 114079 queued 05:56:46 Received message from Master: op=PointingHead serial=114092 05:56:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:56:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:56:46 Point started: ret=0 05:56:46 point_skyscan result=0 05:56:47 Check angles 05:56:47 SkyScan query 05:56:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:56:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:56:48 Message to Master queued w/err=0: serial=114092 error=0 05:56:53 Received message from Master: op=Filter serial=114093 05:56:53 Color wheel filter change from 0 to 0 05:56:53 FLIGetFilterPos err=0 currentPosition=0 05:56:53 FLIGetStepsRemaining err=0 RemainingSteps=0 05:56:53 Filter is already there-color wheel unchanged 05:56:53 Received message from Master: op=Shutter serial=114094 05:56:53 Shutter LASER close 05:56:53 Received message from Camera: op=State serial=114096 05:56:53 GetSingleValue result=40 Value=cccccccc 05:56:53 SkyScan query 05:56:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:56:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:54 Parameters OK 05:56:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:54 Set A/D data flow result=40 05:56:54 Set A/D channel type result=40 05:56:54 Set A/D encoding result=40 05:56:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:54 Set channel filter=0.000000e+000 result=40 05:56:54 Config A/D Result=40 05:56:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:54 Get A/D filter: -9.255963e+061 result=40 05:56:54 Get A/D value=-858993460 result=40 05:56:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:54 Parameters OK 05:56:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:54 Set A/D data flow result=40 05:56:54 Set A/D channel type result=40 05:56:54 Set A/D encoding result=40 05:56:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:54 Set channel filter=0.000000e+000 result=40 05:56:54 Config A/D Result=40 05:56:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:54 Get A/D filter: -9.255963e+061 result=40 05:56:54 Get A/D value=-858993460 result=40 05:56:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:56:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:56:54 Aux= 05:56:54 Message to Camera, serial 114096 queued 05:57:30 Received message from Master: op=PointingHead serial=114109 05:57:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:57:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:57:31 Point started: ret=0 05:57:31 point_skyscan result=0 05:57:32 Check angles 05:57:32 SkyScan query 05:57:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:57:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:57:32 Message to Master queued w/err=0: serial=114109 error=0 05:57:37 Received message from Master: op=Filter serial=114110 05:57:37 Color wheel filter change from 0 to 0 05:57:37 FLIGetFilterPos err=0 currentPosition=0 05:57:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:57:37 Filter is already there-color wheel unchanged 05:57:37 Received message from Master: op=Shutter serial=114111 05:57:37 Shutter LASER close 05:57:37 Received message from Camera: op=State serial=114113 05:57:37 GetSingleValue result=40 Value=cccccccc 05:57:37 SkyScan query 05:57:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:57:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:38 Parameters OK 05:57:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:38 Set A/D data flow result=40 05:57:38 Set A/D channel type result=40 05:57:38 Set A/D encoding result=40 05:57:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:38 Set channel filter=0.000000e+000 result=40 05:57:38 Config A/D Result=40 05:57:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:38 Get A/D filter: -9.255963e+061 result=40 05:57:38 Get A/D value=-858993460 result=40 05:57:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:38 Parameters OK 05:57:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:38 Set A/D data flow result=40 05:57:38 Set A/D channel type result=40 05:57:38 Set A/D encoding result=40 05:57:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:38 Set channel filter=0.000000e+000 result=40 05:57:38 Config A/D Result=40 05:57:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:38 Get A/D filter: -9.255963e+061 result=40 05:57:38 Get A/D value=-858993460 result=40 05:57:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:57:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:57:38 Aux= 05:57:38 Message to Camera, serial 114113 queued 05:58:15 Received message from Master: op=PointingHead serial=114126 05:58:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:58:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:58:15 Point started: ret=0 05:58:15 point_skyscan result=0 05:58:16 Check angles 05:58:16 SkyScan query 05:58:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 05:58:16 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 05:58:17 Check angles 05:58:17 SkyScan query 05:58:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.295<-14953 Statuses=0008 0009 05:58:17 Msec=750 True Az=112.995 Ze=-44.295 Az status=0008 Ze status=0009 05:58:17 Check angles 05:58:17 SkyScan query 05:58:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 05:58:18 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 05:58:18 Check angles 05:58:18 SkyScan query 05:58:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.175<-17745 Statuses=0008 0009 05:58:19 Msec=2250 True Az=112.995 Ze=-86.175 Az status=0008 Ze status=0009 05:58:19 Check angles 05:58:19 SkyScan query 05:58:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.13<-19142 Statuses=0008 0009 05:58:19 Msec=3000 True Az=112.995 Ze=-107.13 Az status=0008 Ze status=0009 05:58:20 Check angles 05:58:20 SkyScan query 05:58:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.07<-20538 Statuses=0008 0009 05:58:20 Msec=3750 True Az=112.995 Ze=-128.07 Az status=0008 Ze status=0009 05:58:20 Check angles 05:58:20 SkyScan query 05:58:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.025<-21935 Statuses=0008 0009 05:58:21 Msec=4500 True Az=112.995 Ze=-149.025 Az status=0008 Ze status=0009 05:58:21 Check angles 05:58:21 SkyScan query 05:58:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.98<-23332 Statuses=0008 0009 05:58:22 Msec=5250 True Az=112.995 Ze=-169.98 Az status=0008 Ze status=0009 05:58:22 Check angles 05:58:22 SkyScan query 05:58:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:58:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:58:22 Message to Master queued w/err=0: serial=114126 error=0 05:58:27 Received message from Master: op=Filter serial=114127 05:58:27 Color wheel filter change from 0 to 0 05:58:27 FLIGetFilterPos err=0 currentPosition=0 05:58:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:58:27 Filter is already there-color wheel unchanged 05:58:28 Received message from Master: op=Shutter serial=114128 05:58:28 Shutter LASER open 05:58:28 Received message from Camera: op=State serial=114130 05:58:28 GetSingleValue result=40 Value=cccccccc 05:58:28 SkyScan query 05:58:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:58:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:28 Parameters OK 05:58:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:28 Set A/D data flow result=40 05:58:28 Set A/D channel type result=40 05:58:28 Set A/D encoding result=40 05:58:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:28 Set channel filter=0.000000e+000 result=40 05:58:28 Config A/D Result=40 05:58:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:28 Get A/D filter: -9.255963e+061 result=40 05:58:28 Get A/D value=-858993460 result=40 05:58:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:28 Parameters OK 05:58:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:28 Set A/D data flow result=40 05:58:28 Set A/D channel type result=40 05:58:28 Set A/D encoding result=40 05:58:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:28 Set channel filter=0.000000e+000 result=40 05:58:28 Config A/D Result=40 05:58:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:28 Get A/D filter: -9.255963e+061 result=40 05:58:28 Get A/D value=-858993460 result=40 05:58:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:58:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:58:28 Aux= 05:58:28 Message to Camera, serial 114130 queued 05:58:37 Received message from Master: op=Shutter serial=114140 05:58:37 Shutter LASER close 05:58:37 Received message from Master: op=PointingHead serial=114144 05:58:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:58:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:58:38 Point started: ret=0 05:58:38 point_skyscan result=0 05:58:38 Check angles 05:58:38 SkyScan query 05:58:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 05:58:39 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 05:58:39 Check angles 05:58:39 SkyScan query 05:58:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.43<-20162 Statuses=0008 0009 05:58:40 Msec=750 True Az=112.995 Ze=-122.43 Az status=0008 Ze status=0009 05:58:40 Check angles 05:58:40 SkyScan query 05:58:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.445<-18763 Statuses=0008 0009 05:58:41 Msec=1500 True Az=112.995 Ze=-101.445 Az status=0008 Ze status=0009 05:58:41 Check angles 05:58:41 SkyScan query 05:58:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.49<-17366 Statuses=0008 0009 05:58:41 Msec=2250 True Az=112.995 Ze=-80.49 Az status=0008 Ze status=0009 05:58:41 Check angles 05:58:41 SkyScan query 05:58:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.55<-15970 Statuses=0008 0009 05:58:42 Msec=3000 True Az=112.995 Ze=-59.55 Az status=0008 Ze status=0009 05:58:42 Check angles 05:58:42 SkyScan query 05:58:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.595<-14573 Statuses=0008 0009 05:58:43 Msec=3750 True Az=112.995 Ze=-38.595 Az status=0008 Ze status=0009 05:58:43 Check angles 05:58:43 SkyScan query 05:58:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.625<-13175 Statuses=0008 0009 05:58:44 Msec=4500 True Az=112.995 Ze=-17.625 Az status=0008 Ze status=0009 05:58:44 Check angles 05:58:44 SkyScan query 05:58:44 SkyScan query done: ret=0 az=112.995<-7533 ze=3.78<-11748 Statuses=0008 0009 05:58:44 Msec=5250 True Az=112.995 Ze=3.78 Az status=0008 Ze status=0009 05:58:44 Check angles 05:58:44 SkyScan query 05:58:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:58:45 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:58:45 Message to Master queued w/err=0: serial=114144 error=0 05:58:50 Received message from Master: op=Filter serial=114145 05:58:50 Color wheel filter change from 0 to 0 05:58:50 FLIGetFilterPos err=0 currentPosition=0 05:58:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:58:50 Filter is already there-color wheel unchanged 05:58:50 Received message from Master: op=Shutter serial=114146 05:58:50 Shutter LASER close 05:58:50 Received message from Camera: op=State serial=114148 05:58:50 GetSingleValue result=40 Value=cccccccc 05:58:50 SkyScan query 05:58:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:58:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:51 Parameters OK 05:58:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:51 Set A/D data flow result=40 05:58:51 Set A/D channel type result=40 05:58:51 Set A/D encoding result=40 05:58:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:51 Set channel filter=0.000000e+000 result=40 05:58:51 Config A/D Result=40 05:58:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:51 Get A/D filter: -9.255963e+061 result=40 05:58:51 Get A/D value=-858993460 result=40 05:58:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:51 Parameters OK 05:58:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:51 Set A/D data flow result=40 05:58:51 Set A/D channel type result=40 05:58:51 Set A/D encoding result=40 05:58:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:51 Set channel filter=0.000000e+000 result=40 05:58:51 Config A/D Result=40 05:58:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:51 Get A/D filter: -9.255963e+061 result=40 05:58:51 Get A/D value=-858993460 result=40 05:58:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:58:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:58:51 Aux= 05:58:51 Message to Camera, serial 114148 queued 05:59:28 Received message from Master: op=PointingHead serial=114161 05:59:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:59:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:59:28 Point started: ret=0 05:59:28 point_skyscan result=0 05:59:29 Check angles 05:59:29 SkyScan query 05:59:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:59:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:59:30 Message to Master queued w/err=0: serial=114161 error=0 05:59:35 Received message from Master: op=Filter serial=114162 05:59:35 Color wheel filter change from 0 to 0 05:59:35 FLIGetFilterPos err=0 currentPosition=0 05:59:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:59:35 Filter is already there-color wheel unchanged 05:59:35 Received message from Master: op=Shutter serial=114163 05:59:35 Shutter LASER close 05:59:35 Received message from Camera: op=State serial=114165 05:59:35 GetSingleValue result=40 Value=cccccccc 05:59:35 SkyScan query 05:59:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:59:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:35 Parameters OK 05:59:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:35 Set A/D data flow result=40 05:59:35 Set A/D channel type result=40 05:59:35 Set A/D encoding result=40 05:59:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:35 Set channel filter=0.000000e+000 result=40 05:59:35 Config A/D Result=40 05:59:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:35 Get A/D filter: -9.255963e+061 result=40 05:59:35 Get A/D value=-858993460 result=40 05:59:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:35 Parameters OK 05:59:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:35 Set A/D data flow result=40 05:59:35 Set A/D channel type result=40 05:59:35 Set A/D encoding result=40 05:59:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:35 Set channel filter=0.000000e+000 result=40 05:59:35 Config A/D Result=40 05:59:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:35 Get A/D filter: -9.255963e+061 result=40 05:59:35 Get A/D value=-858993460 result=40 05:59:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:59:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:59:35 Aux= 05:59:35 Message to Camera, serial 114165 queued 06:00:12 Received message from Master: op=PointingHead serial=114178 06:00:12 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:00:12 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:00:13 Point started: ret=0 06:00:13 point_skyscan result=0 06:00:13 Check angles 06:00:13 SkyScan query 06:00:14 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 06:00:14 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 06:00:14 Check angles 06:00:14 SkyScan query 06:00:15 SkyScan query done: ret=0 az=153.78<-10252 ze=-6.495<-12433 Statuses=0009 0008 06:00:15 Msec=750 True Az=153.78 Ze=-6.495 Az status=0009 Ze status=0008 06:00:15 Check angles 06:00:15 SkyScan query 06:00:15 SkyScan query done: ret=0 az=171.555<-11437 ze=-6.495<-12433 Statuses=0009 0008 06:00:15 Msec=1500 True Az=171.555 Ze=-6.495 Az status=0009 Ze status=0008 06:00:16 Check angles 06:00:16 SkyScan query 06:00:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:00:16 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:00:16 Message to Master queued w/err=0: serial=114178 error=0 06:00:21 Received message from Master: op=Filter serial=114179 06:00:21 Color wheel filter change from 0 to 0 06:00:21 FLIGetFilterPos err=0 currentPosition=0 06:00:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:00:21 Filter is already there-color wheel unchanged 06:00:21 Received message from Master: op=Shutter serial=114180 06:00:21 Shutter LASER close 06:00:21 Received message from Camera: op=State serial=114182 06:00:21 GetSingleValue result=40 Value=cccccccc 06:00:21 SkyScan query 06:00:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:00:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:22 Parameters OK 06:00:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:22 Set A/D data flow result=40 06:00:22 Set A/D channel type result=40 06:00:22 Set A/D encoding result=40 06:00:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:22 Set channel filter=0.000000e+000 result=40 06:00:22 Config A/D Result=40 06:00:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:22 Get A/D filter: -9.255963e+061 result=40 06:00:22 Get A/D value=-858993460 result=40 06:00:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:22 Parameters OK 06:00:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:22 Set A/D data flow result=40 06:00:22 Set A/D channel type result=40 06:00:22 Set A/D encoding result=40 06:00:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:22 Set channel filter=0.000000e+000 result=40 06:00:22 Config A/D Result=40 06:00:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:22 Get A/D filter: -9.255963e+061 result=40 06:00:22 Get A/D value=-858993460 result=40 06:00:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:00:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:00:22 Aux= 06:00:22 Message to Camera, serial 114182 queued 06:00:58 Received message from Master: op=PointingHead serial=114194 06:00:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:00:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:00:58 Point started: ret=0 06:00:58 point_skyscan result=0 06:00:59 Check angles 06:00:59 SkyScan query 06:00:59 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 06:00:59 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 06:01:00 Check angles 06:01:00 SkyScan query 06:01:00 SkyScan query done: ret=0 az=135.405<-9027 ze=6.495<-11567 Statuses=0009 0008 06:01:00 Msec=750 True Az=135.405 Ze=6.495 Az status=0009 Ze status=0008 06:01:00 Check angles 06:01:00 SkyScan query 06:01:01 SkyScan query done: ret=0 az=117.93<-7862 ze=6.495<-11567 Statuses=0009 0008 06:01:01 Msec=1500 True Az=117.93 Ze=6.495 Az status=0009 Ze status=0008 06:01:01 Check angles 06:01:01 SkyScan query 06:01:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:01:02 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:01:02 Message to Master queued w/err=0: serial=114194 error=0 06:01:07 Received message from Master: op=Filter serial=114195 06:01:07 Color wheel filter change from 0 to 0 06:01:07 FLIGetFilterPos err=0 currentPosition=0 06:01:07 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:07 Filter is already there-color wheel unchanged 06:01:07 Received message from Master: op=Shutter serial=114196 06:01:07 Shutter LASER close 06:01:07 Received message from Camera: op=State serial=114198 06:01:07 GetSingleValue result=40 Value=cccccccc 06:01:07 SkyScan query 06:01:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:01:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:08 Parameters OK 06:01:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:08 Set A/D data flow result=40 06:01:08 Set A/D channel type result=40 06:01:08 Set A/D encoding result=40 06:01:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:08 Set channel filter=0.000000e+000 result=40 06:01:08 Config A/D Result=40 06:01:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:08 Get A/D filter: -9.255963e+061 result=40 06:01:08 Get A/D value=-858993460 result=40 06:01:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:08 Parameters OK 06:01:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:08 Set A/D data flow result=40 06:01:08 Set A/D channel type result=40 06:01:08 Set A/D encoding result=40 06:01:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:08 Set channel filter=0.000000e+000 result=40 06:01:08 Config A/D Result=40 06:01:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:08 Get A/D filter: -9.255963e+061 result=40 06:01:08 Get A/D value=-858993460 result=40 06:01:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:08 Aux= 06:01:08 Message to Camera, serial 114198 queued 06:01:44 Received message from Master: op=PointingHead serial=114211 06:01:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:01:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:01:45 Point started: ret=0 06:01:45 point_skyscan result=0 06:01:45 Check angles 06:01:45 SkyScan query 06:01:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.01<-13534 Statuses=0008 0009 06:01:46 Msec=0 True Az=112.995 Ze=-23.01 Az status=0008 Ze status=0009 06:01:46 Check angles 06:01:46 SkyScan query 06:01:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.01<-14934 Statuses=0008 0009 06:01:47 Msec=750 True Az=112.995 Ze=-44.01 Az status=0008 Ze status=0009 06:01:47 Check angles 06:01:47 SkyScan query 06:01:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.935<-16329 Statuses=0008 0009 06:01:48 Msec=1500 True Az=112.995 Ze=-64.935 Az status=0008 Ze status=0009 06:01:48 Check angles 06:01:48 SkyScan query 06:01:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.92<-17728 Statuses=0008 0009 06:01:48 Msec=2250 True Az=112.995 Ze=-85.92 Az status=0008 Ze status=0009 06:01:48 Check angles 06:01:48 SkyScan query 06:01:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.83<-19122 Statuses=0008 0009 06:01:49 Msec=3000 True Az=112.995 Ze=-106.83 Az status=0008 Ze status=0009 06:01:49 Check angles 06:01:49 SkyScan query 06:01:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.785<-20519 Statuses=0008 0009 06:01:50 Msec=3750 True Az=112.995 Ze=-127.785 Az status=0008 Ze status=0009 06:01:50 Check angles 06:01:50 SkyScan query 06:01:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.16<-21944 Statuses=0008 0009 06:01:51 Msec=4500 True Az=112.995 Ze=-149.16 Az status=0008 Ze status=0009 06:01:51 Check angles 06:01:51 SkyScan query 06:01:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.1<-23340 Statuses=0008 0009 06:01:51 Msec=5250 True Az=112.995 Ze=-170.1 Az status=0008 Ze status=0009 06:01:51 Check angles 06:01:51 SkyScan query 06:01:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:01:52 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:01:52 Message to Master queued w/err=0: serial=114211 error=0 06:01:57 Received message from Master: op=Filter serial=114212 06:01:57 Color wheel filter change from 0 to 0 06:01:57 FLIGetFilterPos err=0 currentPosition=0 06:01:57 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:57 Filter is already there-color wheel unchanged 06:01:57 Received message from Master: op=Shutter serial=114213 06:01:57 Shutter LASER open 06:01:57 Received message from Camera: op=State serial=114215 06:01:57 GetSingleValue result=40 Value=cccccccc 06:01:57 SkyScan query 06:01:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:01:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:58 Parameters OK 06:01:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:58 Set A/D data flow result=40 06:01:58 Set A/D channel type result=40 06:01:58 Set A/D encoding result=40 06:01:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:58 Set channel filter=0.000000e+000 result=40 06:01:58 Config A/D Result=40 06:01:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:58 Get A/D filter: -9.255963e+061 result=40 06:01:58 Get A/D value=-858993460 result=40 06:01:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:58 Parameters OK 06:01:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:58 Set A/D data flow result=40 06:01:58 Set A/D channel type result=40 06:01:58 Set A/D encoding result=40 06:01:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:58 Set channel filter=0.000000e+000 result=40 06:01:58 Config A/D Result=40 06:01:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:58 Get A/D filter: -9.255963e+061 result=40 06:01:58 Get A/D value=-858993460 result=40 06:01:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:58 Aux= 06:01:58 Message to Camera, serial 114215 queued 06:02:06 Received message from Master: op=Shutter serial=114225 06:02:06 Shutter LASER close 06:02:07 Received message from Master: op=PointingHead serial=114229 06:02:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:02:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:02:07 Point started: ret=0 06:02:07 point_skyscan result=0 06:02:08 Check angles 06:02:08 SkyScan query 06:02:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.74<-21516 Statuses=0008 0009 06:02:09 Msec=0 True Az=112.995 Ze=-142.74 Az status=0008 Ze status=0009 06:02:09 Check angles 06:02:09 SkyScan query 06:02:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.335<-20089 Statuses=0008 0009 06:02:09 Msec=750 True Az=112.995 Ze=-121.335 Az status=0008 Ze status=0009 06:02:09 Check angles 06:02:09 SkyScan query 06:02:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.38<-18692 Statuses=0008 0009 06:02:10 Msec=1500 True Az=112.995 Ze=-100.38 Az status=0008 Ze status=0009 06:02:10 Check angles 06:02:10 SkyScan query 06:02:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.41<-17294 Statuses=0008 0009 06:02:11 Msec=2250 True Az=112.995 Ze=-79.41 Az status=0008 Ze status=0009 06:02:11 Check angles 06:02:11 SkyScan query 06:02:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.44<-15896 Statuses=0008 0009 06:02:12 Msec=3000 True Az=112.995 Ze=-58.44 Az status=0008 Ze status=0009 06:02:12 Check angles 06:02:12 SkyScan query 06:02:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.5<-14500 Statuses=0008 0009 06:02:12 Msec=3750 True Az=112.995 Ze=-37.5 Az status=0008 Ze status=0009 06:02:12 Check angles 06:02:12 SkyScan query 06:02:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.545<-13103 Statuses=0008 0009 06:02:13 Msec=4500 True Az=112.995 Ze=-16.545 Az status=0008 Ze status=0009 06:02:13 Check angles 06:02:13 SkyScan query 06:02:14 SkyScan query done: ret=0 az=112.995<-7533 ze=4.35<-11710 Statuses=0008 0009 06:02:14 Msec=5250 True Az=112.995 Ze=4.35 Az status=0008 Ze status=0009 06:02:14 Check angles 06:02:14 SkyScan query 06:02:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:02:15 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:02:15 Message to Master queued w/err=0: serial=114229 error=0 06:02:20 Received message from Master: op=Filter serial=114230 06:02:20 Color wheel filter change from 0 to 0 06:02:20 FLIGetFilterPos err=0 currentPosition=0 06:02:20 FLIGetStepsRemaining err=0 RemainingSteps=0 06:02:20 Filter is already there-color wheel unchanged 06:02:20 Received message from Master: op=Shutter serial=114231 06:02:20 Shutter LASER close 06:02:20 Received message from Camera: op=State serial=114233 06:02:20 GetSingleValue result=40 Value=cccccccc 06:02:20 SkyScan query 06:02:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:02:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:20 Parameters OK 06:02:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:20 Set A/D data flow result=40 06:02:20 Set A/D channel type result=40 06:02:20 Set A/D encoding result=40 06:02:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:20 Set channel filter=0.000000e+000 result=40 06:02:20 Config A/D Result=40 06:02:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:20 Get A/D filter: -9.255963e+061 result=40 06:02:20 Get A/D value=-858993460 result=40 06:02:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:20 Parameters OK 06:02:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:20 Set A/D data flow result=40 06:02:20 Set A/D channel type result=40 06:02:20 Set A/D encoding result=40 06:02:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:20 Set channel filter=0.000000e+000 result=40 06:02:20 Config A/D Result=40 06:02:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:20 Get A/D filter: -9.255963e+061 result=40 06:02:20 Get A/D value=-858993460 result=40 06:02:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:02:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:02:20 Aux= 06:02:20 Message to Camera, serial 114233 queued 06:02:57 Received message from Master: op=PointingHead serial=114246 06:02:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:02:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:02:58 Point started: ret=0 06:02:58 point_skyscan result=0 06:02:58 Check angles 06:02:58 SkyScan query 06:02:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:02:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:02:59 Message to Master queued w/err=0: serial=114246 error=0 06:03:04 Received message from Master: op=Filter serial=114247 06:03:04 Color wheel filter change from 0 to 0 06:03:04 FLIGetFilterPos err=0 currentPosition=0 06:03:04 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:04 Filter is already there-color wheel unchanged 06:03:04 Received message from Master: op=Shutter serial=114248 06:03:04 Shutter LASER close 06:03:04 Received message from Camera: op=State serial=114250 06:03:04 GetSingleValue result=40 Value=cccccccc 06:03:04 SkyScan query 06:03:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:03:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:05 Parameters OK 06:03:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:05 Set A/D data flow result=40 06:03:05 Set A/D channel type result=40 06:03:05 Set A/D encoding result=40 06:03:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:05 Set channel filter=0.000000e+000 result=40 06:03:05 Config A/D Result=40 06:03:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:05 Get A/D filter: -9.255963e+061 result=40 06:03:05 Get A/D value=-858993460 result=40 06:03:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:05 Parameters OK 06:03:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:05 Set A/D data flow result=40 06:03:05 Set A/D channel type result=40 06:03:05 Set A/D encoding result=40 06:03:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:05 Set channel filter=0.000000e+000 result=40 06:03:05 Config A/D Result=40 06:03:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:05 Get A/D filter: -9.255963e+061 result=40 06:03:05 Get A/D value=-858993460 result=40 06:03:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:05 Aux= 06:03:05 Message to Camera, serial 114250 queued 06:03:38 Received message from Master: op=Identify serial=114256 06:03:42 Received message from Master: op=PointingHead serial=114266 06:03:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:03:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:03:42 Point started: ret=0 06:03:42 point_skyscan result=0 06:03:43 Check angles 06:03:43 SkyScan query 06:03:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:03:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:03:43 Message to Master queued w/err=0: serial=114266 error=0 06:03:48 Received message from Master: op=Filter serial=114267 06:03:48 Color wheel filter change from 0 to 0 06:03:48 FLIGetFilterPos err=0 currentPosition=0 06:03:48 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:48 Filter is already there-color wheel unchanged 06:03:48 Received message from Master: op=Shutter serial=114268 06:03:48 Shutter LASER close 06:03:49 Received message from Camera: op=State serial=114270 06:03:49 GetSingleValue result=40 Value=cccccccc 06:03:49 SkyScan query 06:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:03:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:49 Parameters OK 06:03:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:49 Set A/D data flow result=40 06:03:49 Set A/D channel type result=40 06:03:49 Set A/D encoding result=40 06:03:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:49 Set channel filter=0.000000e+000 result=40 06:03:49 Config A/D Result=40 06:03:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:49 Get A/D filter: -9.255963e+061 result=40 06:03:49 Get A/D value=-858993460 result=40 06:03:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:49 Parameters OK 06:03:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:49 Set A/D data flow result=40 06:03:49 Set A/D channel type result=40 06:03:49 Set A/D encoding result=40 06:03:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:49 Set channel filter=0.000000e+000 result=40 06:03:49 Config A/D Result=40 06:03:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:49 Get A/D filter: -9.255963e+061 result=40 06:03:49 Get A/D value=-858993460 result=40 06:03:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:49 Aux= 06:03:49 Message to Camera, serial 114270 queued [UTC 2019-3-5 06:03:50] 06:04:26 Received message from Master: op=PointingHead serial=114283 06:04:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:04:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:04:26 Point started: ret=0 06:04:26 point_skyscan result=0 06:04:27 Check angles 06:04:27 SkyScan query 06:04:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:04:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:04:28 Message to Master queued w/err=0: serial=114283 error=0 06:04:33 Received message from Master: op=Filter serial=114284 06:04:33 Color wheel filter change from 0 to 0 06:04:33 FLIGetFilterPos err=0 currentPosition=0 06:04:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:04:33 Filter is already there-color wheel unchanged 06:04:33 Received message from Master: op=Shutter serial=114285 06:04:33 Shutter LASER close 06:04:33 Received message from Camera: op=State serial=114287 06:04:33 GetSingleValue result=40 Value=cccccccc 06:04:33 SkyScan query 06:04:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:04:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:33 Parameters OK 06:04:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:33 Set A/D data flow result=40 06:04:33 Set A/D channel type result=40 06:04:33 Set A/D encoding result=40 06:04:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:33 Set channel filter=0.000000e+000 result=40 06:04:33 Config A/D Result=40 06:04:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:33 Get A/D filter: -9.255963e+061 result=40 06:04:33 Get A/D value=-858993460 result=40 06:04:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:33 Parameters OK 06:04:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:33 Set A/D data flow result=40 06:04:33 Set A/D channel type result=40 06:04:33 Set A/D encoding result=40 06:04:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:33 Set channel filter=0.000000e+000 result=40 06:04:33 Config A/D Result=40 06:04:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:33 Get A/D filter: -9.255963e+061 result=40 06:04:33 Get A/D value=-858993460 result=40 06:04:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:04:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:04:33 Aux= 06:04:33 Message to Camera, serial 114287 queued 06:05:10 Received message from Master: op=PointingHead serial=114300 06:05:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:05:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:05:11 Point started: ret=0 06:05:11 point_skyscan result=0 06:05:11 Check angles 06:05:11 SkyScan query 06:05:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 06:05:12 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 06:05:12 Check angles 06:05:12 SkyScan query 06:05:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 06:05:13 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 06:05:13 Check angles 06:05:13 SkyScan query 06:05:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.925<-16395 Statuses=0008 0009 06:05:13 Msec=1500 True Az=112.995 Ze=-65.925 Az status=0008 Ze status=0009 06:05:14 Check angles 06:05:14 SkyScan query 06:05:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.79<-17786 Statuses=0008 0009 06:05:14 Msec=2250 True Az=112.995 Ze=-86.79 Az status=0008 Ze status=0009 06:05:14 Check angles 06:05:14 SkyScan query 06:05:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.745<-19183 Statuses=0008 0009 06:05:15 Msec=3000 True Az=112.995 Ze=-107.745 Az status=0008 Ze status=0009 06:05:15 Check angles 06:05:15 SkyScan query 06:05:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.685<-20579 Statuses=0008 0009 06:05:16 Msec=3750 True Az=112.995 Ze=-128.685 Az status=0008 Ze status=0009 06:05:16 Check angles 06:05:16 SkyScan query 06:05:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.655<-21977 Statuses=0008 0009 06:05:16 Msec=4500 True Az=112.995 Ze=-149.655 Az status=0008 Ze status=0009 06:05:17 Check angles 06:05:17 SkyScan query 06:05:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.565<-23371 Statuses=0008 0009 06:05:17 Msec=5250 True Az=112.995 Ze=-170.565 Az status=0008 Ze status=0009 06:05:17 Check angles 06:05:17 SkyScan query 06:05:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:05:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:05:18 Message to Master queued w/err=0: serial=114300 error=0 06:05:23 Received message from Master: op=Filter serial=114301 06:05:23 Color wheel filter change from 0 to 0 06:05:23 FLIGetFilterPos err=0 currentPosition=0 06:05:23 FLIGetStepsRemaining err=0 RemainingSteps=0 06:05:23 Filter is already there-color wheel unchanged 06:05:23 Received message from Master: op=Shutter serial=114302 06:05:23 Shutter LASER open 06:05:23 Received message from Camera: op=State serial=114304 06:05:23 GetSingleValue result=40 Value=cccccccc 06:05:23 SkyScan query 06:05:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:05:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:24 Parameters OK 06:05:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:24 Set A/D data flow result=40 06:05:24 Set A/D channel type result=40 06:05:24 Set A/D encoding result=40 06:05:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:24 Set channel filter=0.000000e+000 result=40 06:05:24 Config A/D Result=40 06:05:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:24 Get A/D filter: -9.255963e+061 result=40 06:05:24 Get A/D value=-858993460 result=40 06:05:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:24 Parameters OK 06:05:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:24 Set A/D data flow result=40 06:05:24 Set A/D channel type result=40 06:05:24 Set A/D encoding result=40 06:05:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:24 Set channel filter=0.000000e+000 result=40 06:05:24 Config A/D Result=40 06:05:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:24 Get A/D filter: -9.255963e+061 result=40 06:05:24 Get A/D value=-858993460 result=40 06:05:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:05:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:05:24 Aux= 06:05:24 Message to Camera, serial 114304 queued 06:05:32 Received message from Master: op=Shutter serial=114314 06:05:32 Shutter LASER close 06:05:33 Received message from Master: op=PointingHead serial=114318 06:05:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:05:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:05:33 Point started: ret=0 06:05:33 point_skyscan result=0 06:05:34 Check angles 06:05:34 SkyScan query 06:05:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 06:05:35 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 06:05:35 Check angles 06:05:35 SkyScan query 06:05:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 06:05:35 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 06:05:35 Check angles 06:05:35 SkyScan query 06:05:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.16<-18744 Statuses=0008 0009 06:05:36 Msec=1500 True Az=112.995 Ze=-101.16 Az status=0008 Ze status=0009 06:05:36 Check angles 06:05:36 SkyScan query 06:05:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 06:05:37 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 06:05:37 Check angles 06:05:37 SkyScan query 06:05:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 06:05:38 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 06:05:38 Check angles 06:05:38 SkyScan query 06:05:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.265<-14551 Statuses=0008 0009 06:05:38 Msec=3750 True Az=112.995 Ze=-38.265 Az status=0008 Ze status=0009 06:05:38 Check angles 06:05:38 SkyScan query 06:05:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.325<-13155 Statuses=0008 0009 06:05:39 Msec=4500 True Az=112.995 Ze=-17.325 Az status=0008 Ze status=0009 06:05:39 Check angles 06:05:39 SkyScan query 06:05:40 SkyScan query done: ret=0 az=112.995<-7533 ze=3.63<-11758 Statuses=0008 0009 06:05:40 Msec=5250 True Az=112.995 Ze=3.63 Az status=0008 Ze status=0009 06:05:40 Check angles 06:05:40 SkyScan query 06:05:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:05:41 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:05:41 Message to Master queued w/err=0: serial=114318 error=0 06:05:46 Received message from Master: op=Filter serial=114319 06:05:46 Color wheel filter change from 0 to 0 06:05:46 FLIGetFilterPos err=0 currentPosition=0 06:05:46 FLIGetStepsRemaining err=0 RemainingSteps=0 06:05:46 Filter is already there-color wheel unchanged 06:05:46 Received message from Master: op=Shutter serial=114320 06:05:46 Shutter LASER close 06:05:46 Received message from Camera: op=State serial=114322 06:05:46 GetSingleValue result=40 Value=cccccccc 06:05:46 SkyScan query 06:05:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:05:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:46 Parameters OK 06:05:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:46 Set A/D data flow result=40 06:05:46 Set A/D channel type result=40 06:05:46 Set A/D encoding result=40 06:05:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:46 Set channel filter=0.000000e+000 result=40 06:05:46 Config A/D Result=40 06:05:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:46 Get A/D filter: -9.255963e+061 result=40 06:05:46 Get A/D value=-858993460 result=40 06:05:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:46 Parameters OK 06:05:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:46 Set A/D data flow result=40 06:05:46 Set A/D channel type result=40 06:05:46 Set A/D encoding result=40 06:05:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:46 Set channel filter=0.000000e+000 result=40 06:05:46 Config A/D Result=40 06:05:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:46 Get A/D filter: -9.255963e+061 result=40 06:05:46 Get A/D value=-858993460 result=40 06:05:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:05:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:05:46 Aux= 06:05:46 Message to Camera, serial 114322 queued 06:06:23 Received message from Master: op=PointingHead serial=114335 06:06:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:06:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:06:24 Point started: ret=0 06:06:24 point_skyscan result=0 06:06:24 Check angles 06:06:24 SkyScan query 06:06:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:06:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:06:25 Message to Master queued w/err=0: serial=114335 error=0 06:06:30 Received message from Master: op=Filter serial=114336 06:06:30 Color wheel filter change from 0 to 0 06:06:30 FLIGetFilterPos err=0 currentPosition=0 06:06:30 FLIGetStepsRemaining err=0 RemainingSteps=0 06:06:30 Filter is already there-color wheel unchanged 06:06:30 Received message from Master: op=Shutter serial=114337 06:06:30 Shutter LASER close 06:06:30 Received message from Camera: op=State serial=114339 06:06:30 GetSingleValue result=40 Value=cccccccc 06:06:30 SkyScan query 06:06:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:06:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:31 Parameters OK 06:06:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:31 Set A/D data flow result=40 06:06:31 Set A/D channel type result=40 06:06:31 Set A/D encoding result=40 06:06:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:31 Set channel filter=0.000000e+000 result=40 06:06:31 Config A/D Result=40 06:06:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:31 Get A/D filter: -9.255963e+061 result=40 06:06:31 Get A/D value=-858993460 result=40 06:06:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:31 Parameters OK 06:06:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:31 Set A/D data flow result=40 06:06:31 Set A/D channel type result=40 06:06:31 Set A/D encoding result=40 06:06:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:31 Set channel filter=0.000000e+000 result=40 06:06:31 Config A/D Result=40 06:06:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:31 Get A/D filter: -9.255963e+061 result=40 06:06:31 Get A/D value=-858993460 result=40 06:06:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:06:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:06:31 Aux= 06:06:31 Message to Camera, serial 114339 queued 06:07:08 Received message from Master: op=PointingHead serial=114352 06:07:08 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:07:08 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:07:08 Point started: ret=0 06:07:08 point_skyscan result=0 06:07:09 Check angles 06:07:09 SkyScan query 06:07:09 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 06:07:09 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 06:07:09 Check angles 06:07:09 SkyScan query 06:07:10 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.495<-12433 Statuses=0009 0008 06:07:10 Msec=750 True Az=153.525 Ze=-6.495 Az status=0009 Ze status=0008 06:07:10 Check angles 06:07:10 SkyScan query 06:07:11 SkyScan query done: ret=0 az=171.015<-11401 ze=-6.495<-12433 Statuses=0009 0008 06:07:11 Msec=1500 True Az=171.015 Ze=-6.495 Az status=0009 Ze status=0008 06:07:11 Check angles 06:07:11 SkyScan query 06:07:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:07:11 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:07:11 Message to Master queued w/err=0: serial=114352 error=0 06:07:16 Received message from Master: op=Filter serial=114353 06:07:16 Color wheel filter change from 0 to 0 06:07:16 FLIGetFilterPos err=0 currentPosition=0 06:07:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:07:16 Filter is already there-color wheel unchanged 06:07:17 Received message from Master: op=Shutter serial=114354 06:07:17 Shutter LASER close 06:07:17 Received message from Camera: op=State serial=114356 06:07:17 GetSingleValue result=40 Value=cccccccc 06:07:17 SkyScan query 06:07:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:07:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:17 Parameters OK 06:07:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:17 Set A/D data flow result=40 06:07:17 Set A/D channel type result=40 06:07:17 Set A/D encoding result=40 06:07:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:17 Set channel filter=0.000000e+000 result=40 06:07:17 Config A/D Result=40 06:07:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:17 Get A/D filter: -9.255963e+061 result=40 06:07:17 Get A/D value=-858993460 result=40 06:07:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:17 Parameters OK 06:07:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:17 Set A/D data flow result=40 06:07:17 Set A/D channel type result=40 06:07:17 Set A/D encoding result=40 06:07:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:17 Set channel filter=0.000000e+000 result=40 06:07:17 Config A/D Result=40 06:07:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:17 Get A/D filter: -9.255963e+061 result=40 06:07:17 Get A/D value=-858993460 result=40 06:07:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:07:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:07:17 Aux= 06:07:17 Message to Camera, serial 114356 queued 06:07:54 Received message from Master: op=PointingHead serial=114369 06:07:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:07:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:07:54 Point started: ret=0 06:07:54 point_skyscan result=0 06:07:55 Check angles 06:07:55 SkyScan query 06:07:56 SkyScan query done: ret=0 az=152.82<-10188 ze=6.51<-11566 Statuses=0009 0008 06:07:56 Msec=0 True Az=152.82 Ze=6.51 Az status=0009 Ze status=0008 06:07:56 Check angles 06:07:56 SkyScan query 06:07:57 SkyScan query done: ret=0 az=135.3<-9020 ze=6.495<-11567 Statuses=0009 0008 06:07:57 Msec=750 True Az=135.3 Ze=6.495 Az status=0009 Ze status=0008 06:07:57 Check angles 06:07:57 SkyScan query 06:07:57 SkyScan query done: ret=0 az=117.84<-7856 ze=6.495<-11567 Statuses=0009 0008 06:07:57 Msec=1500 True Az=117.84 Ze=6.495 Az status=0009 Ze status=0008 06:07:57 Check angles 06:07:57 SkyScan query 06:07:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:07:58 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:07:58 Message to Master queued w/err=0: serial=114369 error=0 06:08:03 Received message from Master: op=Filter serial=114370 06:08:03 Color wheel filter change from 0 to 0 06:08:03 FLIGetFilterPos err=0 currentPosition=0 06:08:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:03 Filter is already there-color wheel unchanged 06:08:03 Received message from Master: op=Shutter serial=114371 06:08:03 Shutter LASER close 06:08:03 Received message from Camera: op=State serial=114373 06:08:03 GetSingleValue result=40 Value=cccccccc 06:08:03 SkyScan query 06:08:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:08:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:04 Parameters OK 06:08:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:04 Set A/D data flow result=40 06:08:04 Set A/D channel type result=40 06:08:04 Set A/D encoding result=40 06:08:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:04 Set channel filter=0.000000e+000 result=40 06:08:04 Config A/D Result=40 06:08:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:04 Get A/D filter: -9.255963e+061 result=40 06:08:04 Get A/D value=-858993460 result=40 06:08:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:04 Parameters OK 06:08:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:04 Set A/D data flow result=40 06:08:04 Set A/D channel type result=40 06:08:04 Set A/D encoding result=40 06:08:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:04 Set channel filter=0.000000e+000 result=40 06:08:04 Config A/D Result=40 06:08:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:04 Get A/D filter: -9.255963e+061 result=40 06:08:04 Get A/D value=-858993460 result=40 06:08:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:04 Aux= 06:08:04 Message to Camera, serial 114373 queued 06:08:41 Received message from Master: op=PointingHead serial=114386 06:08:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:08:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:08:41 Point started: ret=0 06:08:41 point_skyscan result=0 06:08:42 Check angles 06:08:42 SkyScan query 06:08:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 06:08:42 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 06:08:43 Check angles 06:08:43 SkyScan query 06:08:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 06:08:43 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 06:08:43 Check angles 06:08:43 SkyScan query 06:08:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 06:08:44 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 06:08:44 Check angles 06:08:44 SkyScan query 06:08:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.43<-17762 Statuses=0008 0009 06:08:45 Msec=2250 True Az=112.995 Ze=-86.43 Az status=0008 Ze status=0009 06:08:45 Check angles 06:08:45 SkyScan query 06:08:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.385<-19159 Statuses=0008 0009 06:08:45 Msec=3000 True Az=112.995 Ze=-107.385 Az status=0008 Ze status=0009 06:08:46 Check angles 06:08:46 SkyScan query 06:08:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.325<-20555 Statuses=0008 0009 06:08:46 Msec=3750 True Az=112.995 Ze=-128.325 Az status=0008 Ze status=0009 06:08:46 Check angles 06:08:46 SkyScan query 06:08:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.295<-21953 Statuses=0008 0009 06:08:47 Msec=4500 True Az=112.995 Ze=-149.295 Az status=0008 Ze status=0009 06:08:47 Check angles 06:08:47 SkyScan query 06:08:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.25<-23350 Statuses=0008 0009 06:08:48 Msec=5250 True Az=112.995 Ze=-170.25 Az status=0008 Ze status=0009 06:08:48 Check angles 06:08:48 SkyScan query 06:08:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:08:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:08:48 Message to Master queued w/err=0: serial=114386 error=0 06:08:53 Received message from Master: op=Filter serial=114387 06:08:53 Color wheel filter change from 0 to 0 06:08:53 FLIGetFilterPos err=0 currentPosition=0 06:08:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:53 Filter is already there-color wheel unchanged 06:08:54 Received message from Master: op=Shutter serial=114388 06:08:54 Shutter LASER open 06:08:54 Received message from Camera: op=State serial=114390 06:08:54 GetSingleValue result=40 Value=cccccccc 06:08:54 SkyScan query 06:08:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:08:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:54 Parameters OK 06:08:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:54 Set A/D data flow result=40 06:08:54 Set A/D channel type result=40 06:08:54 Set A/D encoding result=40 06:08:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:54 Set channel filter=0.000000e+000 result=40 06:08:54 Config A/D Result=40 06:08:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:54 Get A/D filter: -9.255963e+061 result=40 06:08:54 Get A/D value=-858993460 result=40 06:08:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:54 Parameters OK 06:08:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:54 Set A/D data flow result=40 06:08:54 Set A/D channel type result=40 06:08:54 Set A/D encoding result=40 06:08:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:54 Set channel filter=0.000000e+000 result=40 06:08:54 Config A/D Result=40 06:08:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:54 Get A/D filter: -9.255963e+061 result=40 06:08:54 Get A/D value=-858993460 result=40 06:08:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:54 Aux= 06:08:54 Message to Camera, serial 114390 queued 06:09:03 Received message from Master: op=Shutter serial=114400 06:09:03 Shutter LASER close 06:09:03 Received message from Master: op=PointingHead serial=114404 06:09:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:09:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:09:04 Point started: ret=0 06:09:04 point_skyscan result=0 06:09:04 Check angles 06:09:04 SkyScan query 06:09:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.115<-21541 Statuses=0008 0009 06:09:05 Msec=0 True Az=112.995 Ze=-143.115 Az status=0008 Ze status=0009 06:09:05 Check angles 06:09:05 SkyScan query 06:09:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.145<-20143 Statuses=0008 0009 06:09:06 Msec=750 True Az=112.995 Ze=-122.145 Az status=0008 Ze status=0009 06:09:06 Check angles 06:09:06 SkyScan query 06:09:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 06:09:06 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 06:09:07 Check angles 06:09:07 SkyScan query 06:09:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.785<-17319 Statuses=0008 0009 06:09:07 Msec=2250 True Az=112.995 Ze=-79.785 Az status=0008 Ze status=0009 06:09:07 Check angles 06:09:07 SkyScan query 06:09:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.86<-15924 Statuses=0008 0009 06:09:08 Msec=3000 True Az=112.995 Ze=-58.86 Az status=0008 Ze status=0009 06:09:08 Check angles 06:09:08 SkyScan query 06:09:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.86<-14524 Statuses=0008 0009 06:09:09 Msec=3750 True Az=112.995 Ze=-37.86 Az status=0008 Ze status=0009 06:09:09 Check angles 06:09:09 SkyScan query 06:09:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.905<-13127 Statuses=0008 0009 06:09:09 Msec=4500 True Az=112.995 Ze=-16.905 Az status=0008 Ze status=0009 06:09:10 Check angles 06:09:10 SkyScan query 06:09:10 SkyScan query done: ret=0 az=112.995<-7533 ze=4.035<-11731 Statuses=0008 0009 06:09:10 Msec=5250 True Az=112.995 Ze=4.035 Az status=0008 Ze status=0009 06:09:10 Check angles 06:09:10 SkyScan query 06:09:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:09:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:09:11 Message to Master queued w/err=0: serial=114404 error=0 06:09:16 Received message from Master: op=Filter serial=114405 06:09:16 Color wheel filter change from 0 to 0 06:09:16 FLIGetFilterPos err=0 currentPosition=0 06:09:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:09:16 Filter is already there-color wheel unchanged 06:09:16 Received message from Master: op=Shutter serial=114406 06:09:16 Shutter LASER close 06:09:16 Received message from Camera: op=State serial=114408 06:09:16 GetSingleValue result=40 Value=cccccccc 06:09:16 SkyScan query 06:09:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:09:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:17 Parameters OK 06:09:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:17 Set A/D data flow result=40 06:09:17 Set A/D channel type result=40 06:09:17 Set A/D encoding result=40 06:09:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:17 Set channel filter=0.000000e+000 result=40 06:09:17 Config A/D Result=40 06:09:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:17 Get A/D filter: -9.255963e+061 result=40 06:09:17 Get A/D value=-858993460 result=40 06:09:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:17 Parameters OK 06:09:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:17 Set A/D data flow result=40 06:09:17 Set A/D channel type result=40 06:09:17 Set A/D encoding result=40 06:09:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:17 Set channel filter=0.000000e+000 result=40 06:09:17 Config A/D Result=40 06:09:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:17 Get A/D filter: -9.255963e+061 result=40 06:09:17 Get A/D value=-858993460 result=40 06:09:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:09:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:09:17 Aux= 06:09:17 Message to Camera, serial 114408 queued 06:09:54 Received message from Master: op=PointingHead serial=114421 06:09:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:09:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:09:54 Point started: ret=0 06:09:54 point_skyscan result=0 06:09:55 Check angles 06:09:55 SkyScan query 06:09:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:09:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:09:55 Message to Master queued w/err=0: serial=114421 error=0 06:10:00 Received message from Master: op=Filter serial=114422 06:10:00 Color wheel filter change from 0 to 0 06:10:00 FLIGetFilterPos err=0 currentPosition=0 06:10:00 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:00 Filter is already there-color wheel unchanged 06:10:01 Received message from Master: op=Shutter serial=114423 06:10:01 Shutter LASER close 06:10:01 Received message from Camera: op=State serial=114425 06:10:01 GetSingleValue result=40 Value=cccccccc 06:10:01 SkyScan query 06:10:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:10:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:01 Parameters OK 06:10:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:01 Set A/D data flow result=40 06:10:01 Set A/D channel type result=40 06:10:01 Set A/D encoding result=40 06:10:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:01 Set channel filter=0.000000e+000 result=40 06:10:01 Config A/D Result=40 06:10:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:01 Get A/D filter: -9.255963e+061 result=40 06:10:01 Get A/D value=-858993460 result=40 06:10:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:01 Parameters OK 06:10:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:01 Set A/D data flow result=40 06:10:01 Set A/D channel type result=40 06:10:01 Set A/D encoding result=40 06:10:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:01 Set channel filter=0.000000e+000 result=40 06:10:01 Config A/D Result=40 06:10:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:01 Get A/D filter: -9.255963e+061 result=40 06:10:01 Get A/D value=-858993460 result=40 06:10:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:01 Aux= 06:10:01 Message to Camera, serial 114425 queued 06:10:38 Received message from Master: op=PointingHead serial=114438 06:10:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:10:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:10:38 Point started: ret=0 06:10:38 point_skyscan result=0 06:10:39 Check angles 06:10:39 SkyScan query 06:10:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:10:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:10:40 Message to Master queued w/err=0: serial=114438 error=0 06:10:45 Received message from Master: op=Filter serial=114439 06:10:45 Color wheel filter change from 0 to 0 06:10:45 FLIGetFilterPos err=0 currentPosition=0 06:10:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:45 Filter is already there-color wheel unchanged 06:10:45 Received message from Master: op=Shutter serial=114440 06:10:45 Shutter LASER close 06:10:45 Received message from Camera: op=State serial=114442 06:10:45 GetSingleValue result=40 Value=cccccccc 06:10:45 SkyScan query 06:10:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:10:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:45 Parameters OK 06:10:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:45 Set A/D data flow result=40 06:10:45 Set A/D channel type result=40 06:10:45 Set A/D encoding result=40 06:10:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:45 Set channel filter=0.000000e+000 result=40 06:10:45 Config A/D Result=40 06:10:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:45 Get A/D filter: -9.255963e+061 result=40 06:10:45 Get A/D value=-858993460 result=40 06:10:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:45 Parameters OK 06:10:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:45 Set A/D data flow result=40 06:10:45 Set A/D channel type result=40 06:10:45 Set A/D encoding result=40 06:10:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:45 Set channel filter=0.000000e+000 result=40 06:10:45 Config A/D Result=40 06:10:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:45 Get A/D filter: -9.255963e+061 result=40 06:10:45 Get A/D value=-858993460 result=40 06:10:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:45 Aux= 06:10:45 Message to Camera, serial 114442 queued 06:11:22 Received message from Master: op=PointingHead serial=114455 06:11:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:11:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:11:23 Point started: ret=0 06:11:23 point_skyscan result=0 06:11:23 Check angles 06:11:23 SkyScan query 06:11:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:11:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:11:24 Message to Master queued w/err=0: serial=114455 error=0 06:11:29 Received message from Master: op=Filter serial=114456 06:11:29 Color wheel filter change from 0 to 0 06:11:29 FLIGetFilterPos err=0 currentPosition=0 06:11:29 FLIGetStepsRemaining err=0 RemainingSteps=0 06:11:29 Filter is already there-color wheel unchanged 06:11:29 Received message from Master: op=Shutter serial=114457 06:11:29 Shutter LASER close 06:11:29 Received message from Camera: op=State serial=114459 06:11:29 GetSingleValue result=40 Value=cccccccc 06:11:29 SkyScan query 06:11:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:11:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:30 Parameters OK 06:11:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:30 Set A/D data flow result=40 06:11:30 Set A/D channel type result=40 06:11:30 Set A/D encoding result=40 06:11:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:30 Set channel filter=0.000000e+000 result=40 06:11:30 Config A/D Result=40 06:11:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:30 Get A/D filter: -9.255963e+061 result=40 06:11:30 Get A/D value=-858993460 result=40 06:11:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:30 Parameters OK 06:11:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:30 Set A/D data flow result=40 06:11:30 Set A/D channel type result=40 06:11:30 Set A/D encoding result=40 06:11:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:30 Set channel filter=0.000000e+000 result=40 06:11:30 Config A/D Result=40 06:11:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:30 Get A/D filter: -9.255963e+061 result=40 06:11:30 Get A/D value=-858993460 result=40 06:11:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:11:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:11:30 Aux= 06:11:30 Message to Camera, serial 114459 queued 06:12:07 Received message from Master: op=PointingHead serial=114472 06:12:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:12:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:12:07 Point started: ret=0 06:12:07 point_skyscan result=0 06:12:08 Check angles 06:12:08 SkyScan query 06:12:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 06:12:08 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 06:12:08 Check angles 06:12:08 SkyScan query 06:12:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.295<-14953 Statuses=0008 0009 06:12:09 Msec=750 True Az=112.995 Ze=-44.295 Az status=0008 Ze status=0009 06:12:09 Check angles 06:12:09 SkyScan query 06:12:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.235<-16349 Statuses=0008 0009 06:12:10 Msec=1500 True Az=112.995 Ze=-65.235 Az status=0008 Ze status=0009 06:12:10 Check angles 06:12:10 SkyScan query 06:12:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.175<-17745 Statuses=0008 0009 06:12:10 Msec=2250 True Az=112.995 Ze=-86.175 Az status=0008 Ze status=0009 06:12:11 Check angles 06:12:11 SkyScan query 06:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.55<-19170 Statuses=0008 0009 06:12:11 Msec=3000 True Az=112.995 Ze=-107.55 Az status=0008 Ze status=0009 06:12:11 Check angles 06:12:11 SkyScan query 06:12:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.49<-20566 Statuses=0008 0009 06:12:12 Msec=3750 True Az=112.995 Ze=-128.49 Az status=0008 Ze status=0009 06:12:12 Check angles 06:12:12 SkyScan query 06:12:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.46<-21964 Statuses=0008 0009 06:12:13 Msec=4500 True Az=112.995 Ze=-149.46 Az status=0008 Ze status=0009 06:12:13 Check angles 06:12:13 SkyScan query 06:12:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.79<-23386 Statuses=0008 0009 06:12:14 Msec=5250 True Az=112.995 Ze=-170.79 Az status=0008 Ze status=0009 06:12:14 Check angles 06:12:14 SkyScan query 06:12:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:12:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:12:14 Message to Master queued w/err=0: serial=114472 error=0 06:12:19 Received message from Master: op=Filter serial=114473 06:12:19 Color wheel filter change from 0 to 0 06:12:19 FLIGetFilterPos err=0 currentPosition=0 06:12:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:12:19 Filter is already there-color wheel unchanged 06:12:19 Received message from Master: op=Shutter serial=114474 06:12:19 Shutter LASER open 06:12:20 Received message from Camera: op=State serial=114476 06:12:20 GetSingleValue result=40 Value=cccccccc 06:12:20 SkyScan query 06:12:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:12:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:20 Parameters OK 06:12:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:20 Set A/D data flow result=40 06:12:20 Set A/D channel type result=40 06:12:20 Set A/D encoding result=40 06:12:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:20 Set channel filter=0.000000e+000 result=40 06:12:20 Config A/D Result=40 06:12:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:20 Get A/D filter: -9.255963e+061 result=40 06:12:20 Get A/D value=-858993460 result=40 06:12:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:20 Parameters OK 06:12:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:20 Set A/D data flow result=40 06:12:20 Set A/D channel type result=40 06:12:20 Set A/D encoding result=40 06:12:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:20 Set channel filter=0.000000e+000 result=40 06:12:20 Config A/D Result=40 06:12:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:20 Get A/D filter: -9.255963e+061 result=40 06:12:20 Get A/D value=-858993460 result=40 06:12:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:12:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:12:20 Aux= 06:12:20 Message to Camera, serial 114476 queued 06:12:29 Received message from Master: op=Shutter serial=114486 06:12:29 Shutter LASER close 06:12:29 Received message from Master: op=PointingHead serial=114490 06:12:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:12:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:12:30 Point started: ret=0 06:12:30 point_skyscan result=0 06:12:30 Check angles 06:12:30 SkyScan query 06:12:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 06:12:31 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 06:12:31 Check angles 06:12:31 SkyScan query 06:12:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.98<-20132 Statuses=0008 0009 06:12:32 Msec=750 True Az=112.995 Ze=-121.98 Az status=0008 Ze status=0009 06:12:32 Check angles 06:12:32 SkyScan query 06:12:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.055<-18737 Statuses=0008 0009 06:12:32 Msec=1500 True Az=112.995 Ze=-101.055 Az status=0008 Ze status=0009 06:12:33 Check angles 06:12:33 SkyScan query 06:12:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.1<-17340 Statuses=0008 0009 06:12:33 Msec=2250 True Az=112.995 Ze=-80.1 Az status=0008 Ze status=0009 06:12:33 Check angles 06:12:33 SkyScan query 06:12:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.16<-15944 Statuses=0008 0009 06:12:34 Msec=3000 True Az=112.995 Ze=-59.16 Az status=0008 Ze status=0009 06:12:34 Check angles 06:12:34 SkyScan query 06:12:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.16<-14544 Statuses=0008 0009 06:12:35 Msec=3750 True Az=112.995 Ze=-38.16 Az status=0008 Ze status=0009 06:12:35 Check angles 06:12:35 SkyScan query 06:12:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.235<-13149 Statuses=0008 0009 06:12:35 Msec=4500 True Az=112.995 Ze=-17.235 Az status=0008 Ze status=0009 06:12:36 Check angles 06:12:36 SkyScan query 06:12:36 SkyScan query done: ret=0 az=112.995<-7533 ze=3.72<-11752 Statuses=0008 0009 06:12:36 Msec=5250 True Az=112.995 Ze=3.72 Az status=0008 Ze status=0009 06:12:36 Check angles 06:12:36 SkyScan query 06:12:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:12:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:12:37 Message to Master queued w/err=0: serial=114490 error=0 06:12:42 Received message from Master: op=Filter serial=114491 06:12:42 Color wheel filter change from 0 to 0 06:12:42 FLIGetFilterPos err=0 currentPosition=0 06:12:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:12:42 Filter is already there-color wheel unchanged 06:12:42 Received message from Master: op=Shutter serial=114492 06:12:42 Shutter LASER close 06:12:42 Received message from Camera: op=State serial=114494 06:12:42 GetSingleValue result=40 Value=cccccccc 06:12:42 SkyScan query 06:12:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:12:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:43 Parameters OK 06:12:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:43 Set A/D data flow result=40 06:12:43 Set A/D channel type result=40 06:12:43 Set A/D encoding result=40 06:12:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:43 Set channel filter=0.000000e+000 result=40 06:12:43 Config A/D Result=40 06:12:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:43 Get A/D filter: -9.255963e+061 result=40 06:12:43 Get A/D value=-858993460 result=40 06:12:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:43 Parameters OK 06:12:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:43 Set A/D data flow result=40 06:12:43 Set A/D channel type result=40 06:12:43 Set A/D encoding result=40 06:12:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:43 Set channel filter=0.000000e+000 result=40 06:12:43 Config A/D Result=40 06:12:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:43 Get A/D filter: -9.255963e+061 result=40 06:12:43 Get A/D value=-858993460 result=40 06:12:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:12:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:12:43 Aux= 06:12:43 Message to Camera, serial 114494 queued 06:13:19 Received message from Master: op=PointingHead serial=114506 06:13:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:13:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:13:19 Point started: ret=0 06:13:19 point_skyscan result=0 06:13:20 Check angles 06:13:20 SkyScan query 06:13:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:13:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:13:20 Message to Master queued w/err=0: serial=114506 error=0 06:13:25 Received message from Master: op=Filter serial=114507 06:13:25 Color wheel filter change from 0 to 0 06:13:25 FLIGetFilterPos err=0 currentPosition=0 06:13:25 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:25 Filter is already there-color wheel unchanged 06:13:26 Received message from Master: op=Shutter serial=114508 06:13:26 Shutter LASER close 06:13:26 Received message from Camera: op=State serial=114510 06:13:26 GetSingleValue result=40 Value=cccccccc 06:13:26 SkyScan query 06:13:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:13:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:26 Parameters OK 06:13:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:26 Set A/D data flow result=40 06:13:26 Set A/D channel type result=40 06:13:26 Set A/D encoding result=40 06:13:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:26 Set channel filter=0.000000e+000 result=40 06:13:26 Config A/D Result=40 06:13:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:26 Get A/D filter: -9.255963e+061 result=40 06:13:26 Get A/D value=-858993460 result=40 06:13:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:26 Parameters OK 06:13:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:26 Set A/D data flow result=40 06:13:26 Set A/D channel type result=40 06:13:26 Set A/D encoding result=40 06:13:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:26 Set channel filter=0.000000e+000 result=40 06:13:26 Config A/D Result=40 06:13:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:26 Get A/D filter: -9.255963e+061 result=40 06:13:26 Get A/D value=-858993460 result=40 06:13:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:26 Aux= 06:13:26 Message to Camera, serial 114510 queued 06:14:03 Received message from Master: op=PointingHead serial=114523 06:14:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:14:03 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:14:03 Point started: ret=0 06:14:03 point_skyscan result=0 06:14:04 Check angles 06:14:04 SkyScan query 06:14:05 SkyScan query done: ret=0 az=136.035<-9069 ze=-6.51<-12434 Statuses=0009 0008 06:14:05 Msec=0 True Az=136.035 Ze=-6.51 Az status=0009 Ze status=0008 06:14:05 Check angles 06:14:05 SkyScan query 06:14:05 SkyScan query done: ret=0 az=153.48<-10232 ze=-6.495<-12433 Statuses=0009 0008 06:14:05 Msec=750 True Az=153.48 Ze=-6.495 Az status=0009 Ze status=0008 06:14:06 Check angles 06:14:06 SkyScan query 06:14:06 SkyScan query done: ret=0 az=170.865<-11391 ze=-6.495<-12433 Statuses=0009 0008 06:14:06 Msec=1500 True Az=170.865 Ze=-6.495 Az status=0009 Ze status=0008 06:14:06 Check angles 06:14:06 SkyScan query 06:14:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:14:07 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:14:07 Message to Master queued w/err=0: serial=114523 error=0 06:14:12 Received message from Master: op=Filter serial=114524 06:14:12 Color wheel filter change from 0 to 0 06:14:12 FLIGetFilterPos err=0 currentPosition=0 06:14:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:14:12 Filter is already there-color wheel unchanged 06:14:12 Received message from Master: op=Shutter serial=114525 06:14:12 Shutter LASER close 06:14:12 Received message from Camera: op=State serial=114527 06:14:12 GetSingleValue result=40 Value=cccccccc 06:14:12 SkyScan query 06:14:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:14:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:13 Parameters OK 06:14:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:13 Set A/D data flow result=40 06:14:13 Set A/D channel type result=40 06:14:13 Set A/D encoding result=40 06:14:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:13 Set channel filter=0.000000e+000 result=40 06:14:13 Config A/D Result=40 06:14:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:13 Get A/D filter: -9.255963e+061 result=40 06:14:13 Get A/D value=-858993460 result=40 06:14:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:13 Parameters OK 06:14:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:13 Set A/D data flow result=40 06:14:13 Set A/D channel type result=40 06:14:13 Set A/D encoding result=40 06:14:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:13 Set channel filter=0.000000e+000 result=40 06:14:13 Config A/D Result=40 06:14:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:13 Get A/D filter: -9.255963e+061 result=40 06:14:13 Get A/D value=-858993460 result=40 06:14:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:14:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:14:13 Aux= 06:14:13 Message to Camera, serial 114527 queued [UTC 2019-3-5 06:14:50] 06:14:50 Received message from Master: op=PointingHead serial=114540 06:14:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:14:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:14:50 Point started: ret=0 06:14:50 point_skyscan result=0 06:14:51 Check angles 06:14:51 SkyScan query 06:14:51 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 06:14:51 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 06:14:51 Check angles 06:14:51 SkyScan query 06:14:52 SkyScan query done: ret=0 az=135.615<-9041 ze=6.495<-11567 Statuses=0009 0008 06:14:52 Msec=750 True Az=135.615 Ze=6.495 Az status=0009 Ze status=0008 06:14:52 Check angles 06:14:52 SkyScan query 06:14:53 SkyScan query done: ret=0 az=117.705<-7847 ze=6.495<-11567 Statuses=0009 0008 06:14:53 Msec=1500 True Az=117.705 Ze=6.495 Az status=0009 Ze status=0008 06:14:53 Check angles 06:14:53 SkyScan query 06:14:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:14:54 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:14:54 Message to Master queued w/err=0: serial=114540 error=0 06:14:59 Received message from Master: op=Filter serial=114541 06:14:59 Color wheel filter change from 0 to 0 06:14:59 FLIGetFilterPos err=0 currentPosition=0 06:14:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:14:59 Filter is already there-color wheel unchanged 06:14:59 Received message from Master: op=Shutter serial=114542 06:14:59 Shutter LASER close 06:14:59 Received message from Camera: op=State serial=114544 06:14:59 GetSingleValue result=40 Value=cccccccc 06:14:59 SkyScan query 06:14:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:14:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:59 Parameters OK 06:14:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:59 Set A/D data flow result=40 06:14:59 Set A/D channel type result=40 06:14:59 Set A/D encoding result=40 06:14:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:59 Set channel filter=0.000000e+000 result=40 06:14:59 Config A/D Result=40 06:14:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:59 Get A/D filter: -9.255963e+061 result=40 06:14:59 Get A/D value=-858993460 result=40 06:14:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:59 Parameters OK 06:14:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:59 Set A/D data flow result=40 06:14:59 Set A/D channel type result=40 06:14:59 Set A/D encoding result=40 06:14:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:59 Set channel filter=0.000000e+000 result=40 06:14:59 Config A/D Result=40 06:14:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:59 Get A/D filter: -9.255963e+061 result=40 06:14:59 Get A/D value=-858993460 result=40 06:14:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:14:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:14:59 Aux= 06:14:59 Message to Camera, serial 114544 queued 06:15:36 Received message from Master: op=PointingHead serial=114557 06:15:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:15:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:15:37 Point started: ret=0 06:15:37 point_skyscan result=0 06:15:37 Check angles 06:15:37 SkyScan query 06:15:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.13<-13542 Statuses=0008 0009 06:15:38 Msec=0 True Az=112.995 Ze=-23.13 Az status=0008 Ze status=0009 06:15:38 Check angles 06:15:38 SkyScan query 06:15:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.16<-14944 Statuses=0008 0009 06:15:39 Msec=750 True Az=112.995 Ze=-44.16 Az status=0008 Ze status=0009 06:15:39 Check angles 06:15:39 SkyScan query 06:15:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.055<-16337 Statuses=0008 0009 06:15:39 Msec=1500 True Az=112.995 Ze=-65.055 Az status=0008 Ze status=0009 06:15:40 Check angles 06:15:40 SkyScan query 06:15:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.01<-17734 Statuses=0008 0009 06:15:40 Msec=2250 True Az=112.995 Ze=-86.01 Az status=0008 Ze status=0009 06:15:40 Check angles 06:15:40 SkyScan query 06:15:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.965<-19131 Statuses=0008 0009 06:15:41 Msec=3000 True Az=112.995 Ze=-106.965 Az status=0008 Ze status=0009 06:15:41 Check angles 06:15:41 SkyScan query 06:15:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.92<-20528 Statuses=0008 0009 06:15:42 Msec=3750 True Az=112.995 Ze=-127.92 Az status=0008 Ze status=0009 06:15:42 Check angles 06:15:42 SkyScan query 06:15:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.845<-21923 Statuses=0008 0009 06:15:42 Msec=4500 True Az=112.995 Ze=-148.845 Az status=0008 Ze status=0009 06:15:43 Check angles 06:15:43 SkyScan query 06:15:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.22<-23348 Statuses=0008 0009 06:15:43 Msec=5250 True Az=112.995 Ze=-170.22 Az status=0008 Ze status=0009 06:15:43 Check angles 06:15:43 SkyScan query 06:15:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:15:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:15:44 Message to Master queued w/err=0: serial=114557 error=0 06:15:49 Received message from Master: op=Filter serial=114558 06:15:49 Color wheel filter change from 0 to 0 06:15:49 FLIGetFilterPos err=0 currentPosition=0 06:15:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:15:49 Filter is already there-color wheel unchanged 06:15:49 Received message from Master: op=Shutter serial=114559 06:15:49 Shutter LASER open 06:15:49 Received message from Camera: op=State serial=114561 06:15:49 GetSingleValue result=40 Value=cccccccc 06:15:49 SkyScan query 06:15:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:15:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:50 Parameters OK 06:15:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:50 Set A/D data flow result=40 06:15:50 Set A/D channel type result=40 06:15:50 Set A/D encoding result=40 06:15:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:50 Set channel filter=0.000000e+000 result=40 06:15:50 Config A/D Result=40 06:15:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:50 Get A/D filter: -9.255963e+061 result=40 06:15:50 Get A/D value=-858993460 result=40 06:15:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:50 Parameters OK 06:15:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:50 Set A/D data flow result=40 06:15:50 Set A/D channel type result=40 06:15:50 Set A/D encoding result=40 06:15:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:50 Set channel filter=0.000000e+000 result=40 06:15:50 Config A/D Result=40 06:15:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:50 Get A/D filter: -9.255963e+061 result=40 06:15:50 Get A/D value=-858993460 result=40 06:15:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:15:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:15:50 Aux= 06:15:50 Message to Camera, serial 114561 queued 06:15:58 Received message from Master: op=Shutter serial=114571 06:15:58 Shutter LASER close 06:15:59 Received message from Master: op=PointingHead serial=114575 06:15:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:15:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:15:59 Point started: ret=0 06:15:59 point_skyscan result=0 06:16:00 Check angles 06:16:00 SkyScan query 06:16:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.295<-21553 Statuses=0008 0009 06:16:00 Msec=0 True Az=112.995 Ze=-143.295 Az status=0008 Ze status=0009 06:16:01 Check angles 06:16:01 SkyScan query 06:16:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 06:16:01 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 06:16:01 Check angles 06:16:01 SkyScan query 06:16:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.47<-18698 Statuses=0008 0009 06:16:02 Msec=1500 True Az=112.995 Ze=-100.47 Az status=0008 Ze status=0009 06:16:02 Check angles 06:16:02 SkyScan query 06:16:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.5<-17300 Statuses=0008 0009 06:16:03 Msec=2250 True Az=112.995 Ze=-79.5 Az status=0008 Ze status=0009 06:16:03 Check angles 06:16:03 SkyScan query 06:16:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.11<-15874 Statuses=0008 0009 06:16:03 Msec=3000 True Az=112.995 Ze=-58.11 Az status=0008 Ze status=0009 06:16:04 Check angles 06:16:04 SkyScan query 06:16:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.78<-14452 Statuses=0008 0009 06:16:04 Msec=3750 True Az=112.995 Ze=-36.78 Az status=0008 Ze status=0009 06:16:04 Check angles 06:16:04 SkyScan query 06:16:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.36<-13024 Statuses=0008 0009 06:16:05 Msec=4500 True Az=112.995 Ze=-15.36 Az status=0008 Ze status=0009 06:16:05 Check angles 06:16:05 SkyScan query 06:16:06 SkyScan query done: ret=0 az=112.995<-7533 ze=5.205<-11653 Statuses=0008 0009 06:16:06 Msec=5250 True Az=112.995 Ze=5.205 Az status=0008 Ze status=0009 06:16:06 Check angles 06:16:06 SkyScan query 06:16:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:16:06 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:16:06 Message to Master queued w/err=0: serial=114575 error=0 06:16:11 Received message from Master: op=Filter serial=114576 06:16:11 Color wheel filter change from 0 to 0 06:16:11 FLIGetFilterPos err=0 currentPosition=0 06:16:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:16:11 Filter is already there-color wheel unchanged 06:16:12 Received message from Master: op=Shutter serial=114577 06:16:12 Shutter LASER close 06:16:12 Received message from Camera: op=State serial=114579 06:16:12 GetSingleValue result=40 Value=cccccccc 06:16:12 SkyScan query 06:16:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:16:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:12 Parameters OK 06:16:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:12 Set A/D data flow result=40 06:16:12 Set A/D channel type result=40 06:16:12 Set A/D encoding result=40 06:16:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:12 Set channel filter=0.000000e+000 result=40 06:16:12 Config A/D Result=40 06:16:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:12 Get A/D filter: -9.255963e+061 result=40 06:16:12 Get A/D value=-858993460 result=40 06:16:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:12 Parameters OK 06:16:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:12 Set A/D data flow result=40 06:16:12 Set A/D channel type result=40 06:16:12 Set A/D encoding result=40 06:16:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:12 Set channel filter=0.000000e+000 result=40 06:16:12 Config A/D Result=40 06:16:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:12 Get A/D filter: -9.255963e+061 result=40 06:16:12 Get A/D value=-858993460 result=40 06:16:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:16:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:16:12 Aux= 06:16:12 Message to Camera, serial 114579 queued 06:16:48 Received message from Master: op=PointingHead serial=114591 06:16:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:16:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:16:49 Point started: ret=0 06:16:49 point_skyscan result=0 06:16:49 Check angles 06:16:49 SkyScan query 06:16:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:16:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:16:50 Message to Master queued w/err=0: serial=114591 error=0 06:16:55 Received message from Master: op=Filter serial=114592 06:16:55 Color wheel filter change from 0 to 0 06:16:55 FLIGetFilterPos err=0 currentPosition=0 06:16:55 FLIGetStepsRemaining err=0 RemainingSteps=0 06:16:55 Filter is already there-color wheel unchanged 06:16:55 Received message from Master: op=Shutter serial=114593 06:16:55 Shutter LASER close 06:16:55 Received message from Camera: op=State serial=114595 06:16:55 GetSingleValue result=40 Value=cccccccc 06:16:55 SkyScan query 06:16:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:16:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:56 Parameters OK 06:16:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:56 Set A/D data flow result=40 06:16:56 Set A/D channel type result=40 06:16:56 Set A/D encoding result=40 06:16:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:56 Set channel filter=0.000000e+000 result=40 06:16:56 Config A/D Result=40 06:16:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:56 Get A/D filter: -9.255963e+061 result=40 06:16:56 Get A/D value=-858993460 result=40 06:16:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:56 Parameters OK 06:16:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:56 Set A/D data flow result=40 06:16:56 Set A/D channel type result=40 06:16:56 Set A/D encoding result=40 06:16:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:56 Set channel filter=0.000000e+000 result=40 06:16:56 Config A/D Result=40 06:16:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:56 Get A/D filter: -9.255963e+061 result=40 06:16:56 Get A/D value=-858993460 result=40 06:16:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:16:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:16:56 Aux= 06:16:56 Message to Camera, serial 114595 queued 06:17:32 Received message from Master: op=PointingHead serial=114608 06:17:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:17:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:17:33 Point started: ret=0 06:17:33 point_skyscan result=0 06:17:34 Check angles 06:17:34 SkyScan query 06:17:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:17:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:17:34 Message to Master queued w/err=0: serial=114608 error=0 06:17:39 Received message from Master: op=Filter serial=114609 06:17:39 Color wheel filter change from 0 to 0 06:17:39 FLIGetFilterPos err=0 currentPosition=0 06:17:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:17:39 Filter is already there-color wheel unchanged 06:17:39 Received message from Master: op=Shutter serial=114610 06:17:39 Shutter LASER close 06:17:39 Received message from Camera: op=State serial=114612 06:17:39 GetSingleValue result=40 Value=cccccccc 06:17:39 SkyScan query 06:17:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:17:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:40 Parameters OK 06:17:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:40 Set A/D data flow result=40 06:17:40 Set A/D channel type result=40 06:17:40 Set A/D encoding result=40 06:17:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:40 Set channel filter=0.000000e+000 result=40 06:17:40 Config A/D Result=40 06:17:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:40 Get A/D filter: -9.255963e+061 result=40 06:17:40 Get A/D value=-858993460 result=40 06:17:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:40 Parameters OK 06:17:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:40 Set A/D data flow result=40 06:17:40 Set A/D channel type result=40 06:17:40 Set A/D encoding result=40 06:17:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:40 Set channel filter=0.000000e+000 result=40 06:17:40 Config A/D Result=40 06:17:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:40 Get A/D filter: -9.255963e+061 result=40 06:17:40 Get A/D value=-858993460 result=40 06:17:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:17:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:17:40 Aux= 06:17:40 Message to Camera, serial 114612 queued 06:18:16 Received message from Master: op=PointingHead serial=114624 06:18:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:18:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:18:16 Point started: ret=0 06:18:16 point_skyscan result=0 06:18:17 Check angles 06:18:17 SkyScan query 06:18:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:18:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:18:18 Message to Master queued w/err=0: serial=114624 error=0 06:18:23 Received message from Master: op=Filter serial=114625 06:18:23 Color wheel filter change from 0 to 0 06:18:23 FLIGetFilterPos err=0 currentPosition=0 06:18:23 FLIGetStepsRemaining err=0 RemainingSteps=0 06:18:23 Filter is already there-color wheel unchanged 06:18:23 Received message from Master: op=Shutter serial=114626 06:18:23 Shutter LASER close 06:18:23 Received message from Camera: op=State serial=114628 06:18:23 GetSingleValue result=40 Value=cccccccc 06:18:23 SkyScan query 06:18:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:18:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:23 Parameters OK 06:18:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:23 Set A/D data flow result=40 06:18:23 Set A/D channel type result=40 06:18:23 Set A/D encoding result=40 06:18:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:23 Set channel filter=0.000000e+000 result=40 06:18:23 Config A/D Result=40 06:18:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:23 Get A/D filter: -9.255963e+061 result=40 06:18:23 Get A/D value=-858993460 result=40 06:18:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:23 Parameters OK 06:18:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:23 Set A/D data flow result=40 06:18:23 Set A/D channel type result=40 06:18:23 Set A/D encoding result=40 06:18:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:23 Set channel filter=0.000000e+000 result=40 06:18:23 Config A/D Result=40 06:18:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:23 Get A/D filter: -9.255963e+061 result=40 06:18:23 Get A/D value=-858993460 result=40 06:18:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:18:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:18:23 Aux= 06:18:23 Message to Camera, serial 114628 queued 06:19:00 Received message from Master: op=PointingHead serial=114641 06:19:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:19:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:19:00 Point started: ret=0 06:19:00 point_skyscan result=0 06:19:01 Check angles 06:19:01 SkyScan query 06:19:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.43<-13562 Statuses=0008 0009 06:19:02 Msec=0 True Az=112.995 Ze=-23.43 Az status=0008 Ze status=0009 06:19:02 Check angles 06:19:02 SkyScan query 06:19:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.43<-14962 Statuses=0008 0009 06:19:03 Msec=750 True Az=112.995 Ze=-44.43 Az status=0008 Ze status=0009 06:19:03 Check angles 06:19:03 SkyScan query 06:19:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.355<-16357 Statuses=0008 0009 06:19:03 Msec=1500 True Az=112.995 Ze=-65.355 Az status=0008 Ze status=0009 06:19:03 Check angles 06:19:03 SkyScan query 06:19:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.31<-17754 Statuses=0008 0009 06:19:04 Msec=2250 True Az=112.995 Ze=-86.31 Az status=0008 Ze status=0009 06:19:04 Check angles 06:19:04 SkyScan query 06:19:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.265<-19151 Statuses=0008 0009 06:19:05 Msec=3000 True Az=112.995 Ze=-107.265 Az status=0008 Ze status=0009 06:19:05 Check angles 06:19:05 SkyScan query 06:19:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.205<-20547 Statuses=0008 0009 06:19:06 Msec=3750 True Az=112.995 Ze=-128.205 Az status=0008 Ze status=0009 06:19:06 Check angles 06:19:06 SkyScan query 06:19:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.16<-21944 Statuses=0008 0009 06:19:06 Msec=4500 True Az=112.995 Ze=-149.16 Az status=0008 Ze status=0009 06:19:06 Check angles 06:19:06 SkyScan query 06:19:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.115<-23341 Statuses=0008 0009 06:19:07 Msec=5250 True Az=112.995 Ze=-170.115 Az status=0008 Ze status=0009 06:19:07 Check angles 06:19:07 SkyScan query 06:19:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:19:08 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:19:08 Message to Master queued w/err=0: serial=114641 error=0 06:19:13 Received message from Master: op=Filter serial=114642 06:19:13 Color wheel filter change from 0 to 0 06:19:13 FLIGetFilterPos err=0 currentPosition=0 06:19:13 FLIGetStepsRemaining err=0 RemainingSteps=0 06:19:13 Filter is already there-color wheel unchanged 06:19:13 Received message from Master: op=Shutter serial=114643 06:19:13 Shutter LASER open 06:19:13 Received message from Camera: op=State serial=114645 06:19:13 GetSingleValue result=40 Value=cccccccc 06:19:13 SkyScan query 06:19:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:19:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:14 Parameters OK 06:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:14 Set A/D data flow result=40 06:19:14 Set A/D channel type result=40 06:19:14 Set A/D encoding result=40 06:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:14 Set channel filter=0.000000e+000 result=40 06:19:14 Config A/D Result=40 06:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:14 Get A/D filter: -9.255963e+061 result=40 06:19:14 Get A/D value=-858993460 result=40 06:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:14 Parameters OK 06:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:14 Set A/D data flow result=40 06:19:14 Set A/D channel type result=40 06:19:14 Set A/D encoding result=40 06:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:14 Set channel filter=0.000000e+000 result=40 06:19:14 Config A/D Result=40 06:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:14 Get A/D filter: -9.255963e+061 result=40 06:19:14 Get A/D value=-858993460 result=40 06:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:19:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:19:14 Aux= 06:19:14 Message to Camera, serial 114645 queued 06:19:22 Received message from Master: op=Shutter serial=114655 06:19:22 Shutter LASER close 06:19:23 Received message from Master: op=PointingHead serial=114659 06:19:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:19:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:19:23 Point started: ret=0 06:19:23 point_skyscan result=0 06:19:24 Check angles 06:19:24 SkyScan query 06:19:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 06:19:24 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 06:19:25 Check angles 06:19:25 SkyScan query 06:19:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.61<-20174 Statuses=0008 0009 06:19:25 Msec=750 True Az=112.995 Ze=-122.61 Az status=0008 Ze status=0009 06:19:25 Check angles 06:19:25 SkyScan query 06:19:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.19<-18746 Statuses=0008 0009 06:19:26 Msec=1500 True Az=112.995 Ze=-101.19 Az status=0008 Ze status=0009 06:19:26 Check angles 06:19:26 SkyScan query 06:19:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 06:19:27 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 06:19:27 Check angles 06:19:27 SkyScan query 06:19:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.295<-15953 Statuses=0008 0009 06:19:27 Msec=3000 True Az=112.995 Ze=-59.295 Az status=0008 Ze status=0009 06:19:28 Check angles 06:19:28 SkyScan query 06:19:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.28<-14552 Statuses=0008 0009 06:19:28 Msec=3750 True Az=112.995 Ze=-38.28 Az status=0008 Ze status=0009 06:19:28 Check angles 06:19:28 SkyScan query 06:19:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.355<-13157 Statuses=0008 0009 06:19:29 Msec=4500 True Az=112.995 Ze=-17.355 Az status=0008 Ze status=0009 06:19:29 Check angles 06:19:29 SkyScan query 06:19:30 SkyScan query done: ret=0 az=112.98<-7532 ze=3.6<-11760 Statuses=0008 0009 06:19:30 Msec=5250 True Az=112.98 Ze=3.6 Az status=0008 Ze status=0009 06:19:30 Check angles 06:19:30 SkyScan query 06:19:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:19:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:19:30 Message to Master queued w/err=0: serial=114659 error=0 06:19:35 Received message from Master: op=Filter serial=114660 06:19:35 Color wheel filter change from 0 to 0 06:19:35 FLIGetFilterPos err=0 currentPosition=0 06:19:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:19:35 Filter is already there-color wheel unchanged 06:19:36 Received message from Master: op=Shutter serial=114661 06:19:36 Shutter LASER close 06:19:36 Received message from Camera: op=State serial=114663 06:19:36 GetSingleValue result=40 Value=cccccccc 06:19:36 SkyScan query 06:19:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:19:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:36 Parameters OK 06:19:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:36 Set A/D data flow result=40 06:19:36 Set A/D channel type result=40 06:19:36 Set A/D encoding result=40 06:19:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:36 Set channel filter=0.000000e+000 result=40 06:19:36 Config A/D Result=40 06:19:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:36 Get A/D filter: -9.255963e+061 result=40 06:19:36 Get A/D value=-858993460 result=40 06:19:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:36 Parameters OK 06:19:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:36 Set A/D data flow result=40 06:19:36 Set A/D channel type result=40 06:19:36 Set A/D encoding result=40 06:19:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:36 Set channel filter=0.000000e+000 result=40 06:19:36 Config A/D Result=40 06:19:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:36 Get A/D filter: -9.255963e+061 result=40 06:19:36 Get A/D value=-858993460 result=40 06:19:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:19:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:19:36 Aux= 06:19:36 Message to Camera, serial 114663 queued 06:20:13 Received message from Master: op=PointingHead serial=114676 06:20:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:20:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:20:14 Point started: ret=0 06:20:14 point_skyscan result=0 06:20:14 Check angles 06:20:14 SkyScan query 06:20:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:20:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:20:15 Message to Master queued w/err=0: serial=114676 error=0 06:20:20 Received message from Master: op=Filter serial=114677 06:20:20 Color wheel filter change from 0 to 0 06:20:20 FLIGetFilterPos err=0 currentPosition=0 06:20:20 FLIGetStepsRemaining err=0 RemainingSteps=0 06:20:20 Filter is already there-color wheel unchanged 06:20:20 Received message from Master: op=Shutter serial=114678 06:20:20 Shutter LASER close 06:20:20 Received message from Camera: op=State serial=114680 06:20:20 GetSingleValue result=40 Value=cccccccc 06:20:20 SkyScan query 06:20:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:20:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:21 Parameters OK 06:20:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:21 Set A/D data flow result=40 06:20:21 Set A/D channel type result=40 06:20:21 Set A/D encoding result=40 06:20:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:21 Set channel filter=0.000000e+000 result=40 06:20:21 Config A/D Result=40 06:20:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:21 Get A/D filter: -9.255963e+061 result=40 06:20:21 Get A/D value=-858993460 result=40 06:20:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:21 Parameters OK 06:20:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:21 Set A/D data flow result=40 06:20:21 Set A/D channel type result=40 06:20:21 Set A/D encoding result=40 06:20:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:21 Set channel filter=0.000000e+000 result=40 06:20:21 Config A/D Result=40 06:20:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:21 Get A/D filter: -9.255963e+061 result=40 06:20:21 Get A/D value=-858993460 result=40 06:20:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:20:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:20:21 Aux= 06:20:21 Message to Camera, serial 114680 queued 06:20:57 Received message from Master: op=PointingHead serial=114693 06:20:57 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:20:57 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:20:58 Point started: ret=0 06:20:58 point_skyscan result=0 06:20:59 Check angles 06:20:59 SkyScan query 06:20:59 SkyScan query done: ret=0 az=136.17<-9078 ze=-6.51<-12434 Statuses=0009 0008 06:20:59 Msec=0 True Az=136.17 Ze=-6.51 Az status=0009 Ze status=0008 06:20:59 Check angles 06:20:59 SkyScan query 06:21:00 SkyScan query done: ret=0 az=154.05<-10270 ze=-6.495<-12433 Statuses=0009 0008 06:21:00 Msec=750 True Az=154.05 Ze=-6.495 Az status=0009 Ze status=0008 06:21:00 Check angles 06:21:00 SkyScan query 06:21:01 SkyScan query done: ret=0 az=171.525<-11435 ze=-6.495<-12433 Statuses=0009 0008 06:21:01 Msec=1500 True Az=171.525 Ze=-6.495 Az status=0009 Ze status=0008 06:21:01 Check angles 06:21:01 SkyScan query 06:21:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:21:01 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:21:01 Message to Master queued w/err=0: serial=114693 error=0 06:21:06 Received message from Master: op=Filter serial=114694 06:21:06 Color wheel filter change from 0 to 0 06:21:06 FLIGetFilterPos err=0 currentPosition=0 06:21:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:21:06 Filter is already there-color wheel unchanged 06:21:07 Received message from Master: op=Shutter serial=114695 06:21:07 Shutter LASER close 06:21:07 Received message from Camera: op=State serial=114697 06:21:07 GetSingleValue result=40 Value=cccccccc 06:21:07 SkyScan query 06:21:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:21:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:07 Parameters OK 06:21:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:07 Set A/D data flow result=40 06:21:07 Set A/D channel type result=40 06:21:07 Set A/D encoding result=40 06:21:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:07 Set channel filter=0.000000e+000 result=40 06:21:07 Config A/D Result=40 06:21:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:07 Get A/D filter: -9.255963e+061 result=40 06:21:07 Get A/D value=-858993460 result=40 06:21:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:07 Parameters OK 06:21:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:07 Set A/D data flow result=40 06:21:07 Set A/D channel type result=40 06:21:07 Set A/D encoding result=40 06:21:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:07 Set channel filter=0.000000e+000 result=40 06:21:07 Config A/D Result=40 06:21:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:07 Get A/D filter: -9.255963e+061 result=40 06:21:07 Get A/D value=-858993460 result=40 06:21:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:21:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:21:07 Aux= 06:21:07 Message to Camera, serial 114697 queued 06:21:44 Received message from Master: op=PointingHead serial=114710 06:21:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:21:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:21:44 Point started: ret=0 06:21:44 point_skyscan result=0 06:21:45 Check angles 06:21:45 SkyScan query 06:21:46 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 06:21:46 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 06:21:46 Check angles 06:21:46 SkyScan query 06:21:46 SkyScan query done: ret=0 az=135.585<-9039 ze=6.495<-11567 Statuses=0009 0008 06:21:46 Msec=750 True Az=135.585 Ze=6.495 Az status=0009 Ze status=0008 06:21:47 Check angles 06:21:47 SkyScan query 06:21:47 SkyScan query done: ret=0 az=117.735<-7849 ze=6.495<-11567 Statuses=0009 0008 06:21:47 Msec=1500 True Az=117.735 Ze=6.495 Az status=0009 Ze status=0008 06:21:47 Check angles 06:21:47 SkyScan query 06:21:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:21:48 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:21:48 Message to Master queued w/err=0: serial=114710 error=0 06:21:53 Received message from Master: op=Filter serial=114711 06:21:53 Color wheel filter change from 0 to 0 06:21:53 FLIGetFilterPos err=0 currentPosition=0 06:21:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:21:53 Filter is already there-color wheel unchanged 06:21:53 Received message from Master: op=Shutter serial=114712 06:21:53 Shutter LASER close 06:21:53 Received message from Camera: op=State serial=114714 06:21:53 GetSingleValue result=40 Value=cccccccc 06:21:53 SkyScan query 06:21:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:21:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:54 Parameters OK 06:21:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:54 Set A/D data flow result=40 06:21:54 Set A/D channel type result=40 06:21:54 Set A/D encoding result=40 06:21:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:54 Set channel filter=0.000000e+000 result=40 06:21:54 Config A/D Result=40 06:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:54 Get A/D filter: -9.255963e+061 result=40 06:21:54 Get A/D value=-858993460 result=40 06:21:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:54 Parameters OK 06:21:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:54 Set A/D data flow result=40 06:21:54 Set A/D channel type result=40 06:21:54 Set A/D encoding result=40 06:21:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:54 Set channel filter=0.000000e+000 result=40 06:21:54 Config A/D Result=40 06:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:54 Get A/D filter: -9.255963e+061 result=40 06:21:54 Get A/D value=-858993460 result=40 06:21:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:21:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:21:54 Aux= 06:21:54 Message to Camera, serial 114714 queued 06:22:31 Received message from Master: op=PointingHead serial=114727 06:22:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:22:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:22:31 Point started: ret=0 06:22:31 point_skyscan result=0 06:22:32 Check angles 06:22:32 SkyScan query 06:22:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.04<-13536 Statuses=0008 0009 06:22:32 Msec=0 True Az=112.995 Ze=-23.04 Az status=0008 Ze status=0009 06:22:32 Check angles 06:22:32 SkyScan query 06:22:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 06:22:33 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 06:22:33 Check angles 06:22:33 SkyScan query 06:22:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.965<-16331 Statuses=0008 0009 06:22:34 Msec=1500 True Az=112.995 Ze=-64.965 Az status=0008 Ze status=0009 06:22:34 Check angles 06:22:34 SkyScan query 06:22:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.95<-17730 Statuses=0008 0009 06:22:35 Msec=2250 True Az=112.995 Ze=-85.95 Az status=0008 Ze status=0009 06:22:35 Check angles 06:22:35 SkyScan query 06:22:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.86<-19124 Statuses=0008 0009 06:22:35 Msec=3000 True Az=112.995 Ze=-106.86 Az status=0008 Ze status=0009 06:22:35 Check angles 06:22:35 SkyScan query 06:22:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.815<-20521 Statuses=0008 0009 06:22:36 Msec=3750 True Az=112.995 Ze=-127.815 Az status=0008 Ze status=0009 06:22:36 Check angles 06:22:36 SkyScan query 06:22:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.74<-21916 Statuses=0008 0009 06:22:37 Msec=4500 True Az=112.995 Ze=-148.74 Az status=0008 Ze status=0009 06:22:37 Check angles 06:22:37 SkyScan query 06:22:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.71<-23314 Statuses=0008 0009 06:22:38 Msec=5250 True Az=112.995 Ze=-169.71 Az status=0008 Ze status=0009 06:22:38 Check angles 06:22:38 SkyScan query 06:22:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:22:38 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:22:38 Message to Master queued w/err=0: serial=114727 error=0 06:22:43 Received message from Master: op=Filter serial=114728 06:22:43 Color wheel filter change from 0 to 0 06:22:43 FLIGetFilterPos err=0 currentPosition=0 06:22:43 FLIGetStepsRemaining err=0 RemainingSteps=0 06:22:43 Filter is already there-color wheel unchanged 06:22:43 Received message from Master: op=Shutter serial=114729 06:22:43 Shutter LASER open 06:22:44 Received message from Camera: op=State serial=114731 06:22:44 GetSingleValue result=40 Value=cccccccc 06:22:44 SkyScan query 06:22:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:22:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:44 Parameters OK 06:22:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:44 Set A/D data flow result=40 06:22:44 Set A/D channel type result=40 06:22:44 Set A/D encoding result=40 06:22:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:44 Set channel filter=0.000000e+000 result=40 06:22:44 Config A/D Result=40 06:22:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:44 Get A/D filter: -9.255963e+061 result=40 06:22:44 Get A/D value=-858993460 result=40 06:22:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:44 Parameters OK 06:22:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:44 Set A/D data flow result=40 06:22:44 Set A/D channel type result=40 06:22:44 Set A/D encoding result=40 06:22:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:44 Set channel filter=0.000000e+000 result=40 06:22:44 Config A/D Result=40 06:22:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:44 Get A/D filter: -9.255963e+061 result=40 06:22:44 Get A/D value=-858993460 result=40 06:22:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:22:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:22:44 Aux= 06:22:44 Message to Camera, serial 114731 queued 06:22:53 Received message from Master: op=Shutter serial=114741 06:22:53 Shutter LASER close 06:22:53 Received message from Master: op=PointingHead serial=114745 06:22:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:22:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:22:53 Point started: ret=0 06:22:53 point_skyscan result=0 06:22:54 Check angles 06:22:54 SkyScan query 06:22:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.565<-21571 Statuses=0008 0009 06:22:55 Msec=0 True Az=112.995 Ze=-143.565 Az status=0008 Ze status=0009 06:22:55 Check angles 06:22:55 SkyScan query 06:22:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.16<-20144 Statuses=0008 0009 06:22:56 Msec=750 True Az=112.995 Ze=-122.16 Az status=0008 Ze status=0009 06:22:56 Check angles 06:22:56 SkyScan query 06:22:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 06:22:56 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 06:22:56 Check angles 06:22:56 SkyScan query 06:22:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.8<-17320 Statuses=0008 0009 06:22:57 Msec=2250 True Az=112.995 Ze=-79.8 Az status=0008 Ze status=0009 06:22:57 Check angles 06:22:57 SkyScan query 06:22:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.83<-15922 Statuses=0008 0009 06:22:58 Msec=3000 True Az=112.995 Ze=-58.83 Az status=0008 Ze status=0009 06:22:58 Check angles 06:22:58 SkyScan query 06:22:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.845<-14523 Statuses=0008 0009 06:22:59 Msec=3750 True Az=112.995 Ze=-37.845 Az status=0008 Ze status=0009 06:22:59 Check angles 06:22:59 SkyScan query 06:22:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.455<-13097 Statuses=0008 0009 06:22:59 Msec=4500 True Az=112.995 Ze=-16.455 Az status=0008 Ze status=0009 06:22:59 Check angles 06:22:59 SkyScan query 06:23:00 SkyScan query done: ret=0 az=113.01<-7534 ze=4.41<-11706 Statuses=0008 0009 06:23:00 Msec=5250 True Az=113.01 Ze=4.41 Az status=0008 Ze status=0009 06:23:00 Check angles 06:23:00 SkyScan query 06:23:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:23:01 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:23:01 Message to Master queued w/err=0: serial=114745 error=0 06:23:06 Received message from Master: op=Filter serial=114746 06:23:06 Color wheel filter change from 0 to 0 06:23:06 FLIGetFilterPos err=0 currentPosition=0 06:23:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:23:06 Filter is already there-color wheel unchanged 06:23:06 Received message from Master: op=Shutter serial=114747 06:23:06 Shutter LASER close 06:23:06 Received message from Camera: op=State serial=114749 06:23:06 GetSingleValue result=40 Value=cccccccc 06:23:06 SkyScan query 06:23:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:23:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:07 Parameters OK 06:23:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:07 Set A/D data flow result=40 06:23:07 Set A/D channel type result=40 06:23:07 Set A/D encoding result=40 06:23:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:07 Set channel filter=0.000000e+000 result=40 06:23:07 Config A/D Result=40 06:23:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:07 Get A/D filter: -9.255963e+061 result=40 06:23:07 Get A/D value=-858993460 result=40 06:23:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:07 Parameters OK 06:23:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:07 Set A/D data flow result=40 06:23:07 Set A/D channel type result=40 06:23:07 Set A/D encoding result=40 06:23:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:07 Set channel filter=0.000000e+000 result=40 06:23:07 Config A/D Result=40 06:23:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:07 Get A/D filter: -9.255963e+061 result=40 06:23:07 Get A/D value=-858993460 result=40 06:23:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:07 Aux= 06:23:07 Message to Camera, serial 114749 queued 06:23:44 Received message from Master: op=PointingHead serial=114762 06:23:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:23:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:23:44 Point started: ret=0 06:23:44 point_skyscan result=0 06:23:45 Check angles 06:23:45 SkyScan query 06:23:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:23:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:23:45 Message to Master queued w/err=0: serial=114762 error=0 [UTC 2019-3-5 06:23:50] 06:23:50 Received message from Master: op=Filter serial=114763 06:23:50 Color wheel filter change from 0 to 0 06:23:50 FLIGetFilterPos err=0 currentPosition=0 06:23:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:23:50 Filter is already there-color wheel unchanged 06:23:50 Received message from Master: op=Shutter serial=114764 06:23:50 Shutter LASER close 06:23:50 Received message from Camera: op=State serial=114766 06:23:50 GetSingleValue result=40 Value=cccccccc 06:23:50 SkyScan query 06:23:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:23:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:51 Parameters OK 06:23:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:51 Set A/D data flow result=40 06:23:51 Set A/D channel type result=40 06:23:51 Set A/D encoding result=40 06:23:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:51 Set channel filter=0.000000e+000 result=40 06:23:51 Config A/D Result=40 06:23:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:51 Get A/D filter: -9.255963e+061 result=40 06:23:51 Get A/D value=-858993460 result=40 06:23:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:51 Parameters OK 06:23:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:51 Set A/D data flow result=40 06:23:51 Set A/D channel type result=40 06:23:51 Set A/D encoding result=40 06:23:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:51 Set channel filter=0.000000e+000 result=40 06:23:51 Config A/D Result=40 06:23:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:51 Get A/D filter: -9.255963e+061 result=40 06:23:51 Get A/D value=-858993460 result=40 06:23:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:51 Aux= 06:23:51 Message to Camera, serial 114766 queued 06:24:28 Received message from Master: op=PointingHead serial=114779 06:24:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:24:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:24:28 Point started: ret=0 06:24:28 point_skyscan result=0 06:24:29 Check angles 06:24:29 SkyScan query 06:24:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:24:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:24:30 Message to Master queued w/err=0: serial=114779 error=0 06:24:35 Received message from Master: op=Filter serial=114780 06:24:35 Color wheel filter change from 0 to 0 06:24:35 FLIGetFilterPos err=0 currentPosition=0 06:24:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:24:35 Filter is already there-color wheel unchanged 06:24:35 Received message from Master: op=Shutter serial=114781 06:24:35 Shutter LASER close 06:24:35 Received message from Camera: op=State serial=114783 06:24:35 GetSingleValue result=40 Value=cccccccc 06:24:35 SkyScan query 06:24:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:24:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:35 Parameters OK 06:24:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:35 Set A/D data flow result=40 06:24:35 Set A/D channel type result=40 06:24:35 Set A/D encoding result=40 06:24:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:35 Set channel filter=0.000000e+000 result=40 06:24:35 Config A/D Result=40 06:24:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:35 Get A/D filter: -9.255963e+061 result=40 06:24:35 Get A/D value=-858993460 result=40 06:24:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:35 Parameters OK 06:24:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:35 Set A/D data flow result=40 06:24:35 Set A/D channel type result=40 06:24:35 Set A/D encoding result=40 06:24:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:35 Set channel filter=0.000000e+000 result=40 06:24:35 Config A/D Result=40 06:24:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:35 Get A/D filter: -9.255963e+061 result=40 06:24:35 Get A/D value=-858993460 result=40 06:24:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:24:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:24:35 Aux= 06:24:35 Message to Camera, serial 114783 queued 06:25:12 Received message from Master: op=PointingHead serial=114796 06:25:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:25:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:25:13 Point started: ret=0 06:25:13 point_skyscan result=0 06:25:13 Check angles 06:25:13 SkyScan query 06:25:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:25:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:25:14 Message to Master queued w/err=0: serial=114796 error=0 06:25:19 Received message from Master: op=Filter serial=114797 06:25:19 Color wheel filter change from 0 to 0 06:25:19 FLIGetFilterPos err=0 currentPosition=0 06:25:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:25:19 Filter is already there-color wheel unchanged 06:25:19 Received message from Master: op=Shutter serial=114798 06:25:19 Shutter LASER close 06:25:19 Received message from Camera: op=State serial=114800 06:25:19 GetSingleValue result=40 Value=cccccccc 06:25:19 SkyScan query 06:25:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:25:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:20 Parameters OK 06:25:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:20 Set A/D data flow result=40 06:25:20 Set A/D channel type result=40 06:25:20 Set A/D encoding result=40 06:25:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:20 Set channel filter=0.000000e+000 result=40 06:25:20 Config A/D Result=40 06:25:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:20 Get A/D filter: -9.255963e+061 result=40 06:25:20 Get A/D value=-858993460 result=40 06:25:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:20 Parameters OK 06:25:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:20 Set A/D data flow result=40 06:25:20 Set A/D channel type result=40 06:25:20 Set A/D encoding result=40 06:25:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:20 Set channel filter=0.000000e+000 result=40 06:25:20 Config A/D Result=40 06:25:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:20 Get A/D filter: -9.255963e+061 result=40 06:25:20 Get A/D value=-858993460 result=40 06:25:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:25:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:25:20 Aux= 06:25:20 Message to Camera, serial 114800 queued 06:25:56 Received message from Master: op=PointingHead serial=114813 06:25:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:25:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:25:57 Point started: ret=0 06:25:57 point_skyscan result=0 06:25:58 Check angles 06:25:58 SkyScan query 06:25:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 06:25:58 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 06:25:58 Check angles 06:25:58 SkyScan query 06:25:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.31<-14954 Statuses=0008 0009 06:25:59 Msec=750 True Az=112.995 Ze=-44.31 Az status=0008 Ze status=0009 06:25:59 Check angles 06:25:59 SkyScan query 06:26:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.235<-16349 Statuses=0008 0009 06:26:00 Msec=1500 True Az=112.995 Ze=-65.235 Az status=0008 Ze status=0009 06:26:00 Check angles 06:26:00 SkyScan query 06:26:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.265<-17751 Statuses=0008 0009 06:26:00 Msec=2250 True Az=112.995 Ze=-86.265 Az status=0008 Ze status=0009 06:26:01 Check angles 06:26:01 SkyScan query 06:26:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.13<-19142 Statuses=0008 0009 06:26:01 Msec=3000 True Az=112.995 Ze=-107.13 Az status=0008 Ze status=0009 06:26:01 Check angles 06:26:01 SkyScan query 06:26:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.07<-20538 Statuses=0008 0009 06:26:02 Msec=3750 True Az=112.995 Ze=-128.07 Az status=0008 Ze status=0009 06:26:02 Check angles 06:26:02 SkyScan query 06:26:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.025<-21935 Statuses=0008 0009 06:26:03 Msec=4500 True Az=112.995 Ze=-149.025 Az status=0008 Ze status=0009 06:26:03 Check angles 06:26:03 SkyScan query 06:26:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.98<-23332 Statuses=0008 0009 06:26:03 Msec=5250 True Az=112.995 Ze=-169.98 Az status=0008 Ze status=0009 06:26:04 Check angles 06:26:04 SkyScan query 06:26:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:26:04 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:26:04 Message to Master queued w/err=0: serial=114813 error=0 06:26:09 Received message from Master: op=Filter serial=114814 06:26:09 Color wheel filter change from 0 to 0 06:26:09 FLIGetFilterPos err=0 currentPosition=0 06:26:09 FLIGetStepsRemaining err=0 RemainingSteps=0 06:26:09 Filter is already there-color wheel unchanged 06:26:09 Received message from Master: op=Shutter serial=114815 06:26:09 Shutter LASER open 06:26:10 Received message from Camera: op=State serial=114817 06:26:10 GetSingleValue result=40 Value=cccccccc 06:26:10 SkyScan query 06:26:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:26:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:10 Parameters OK 06:26:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:10 Set A/D data flow result=40 06:26:10 Set A/D channel type result=40 06:26:10 Set A/D encoding result=40 06:26:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:10 Set channel filter=0.000000e+000 result=40 06:26:10 Config A/D Result=40 06:26:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:10 Get A/D filter: -9.255963e+061 result=40 06:26:10 Get A/D value=-858993460 result=40 06:26:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:10 Parameters OK 06:26:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:10 Set A/D data flow result=40 06:26:10 Set A/D channel type result=40 06:26:10 Set A/D encoding result=40 06:26:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:10 Set channel filter=0.000000e+000 result=40 06:26:10 Config A/D Result=40 06:26:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:10 Get A/D filter: -9.255963e+061 result=40 06:26:10 Get A/D value=-858993460 result=40 06:26:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:26:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:26:10 Aux= 06:26:10 Message to Camera, serial 114817 queued 06:26:19 Received message from Master: op=Shutter serial=114827 06:26:19 Shutter LASER close 06:26:19 Received message from Master: op=PointingHead serial=114831 06:26:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:26:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:26:19 Point started: ret=0 06:26:19 point_skyscan result=0 06:26:20 Check angles 06:26:20 SkyScan query 06:26:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 06:26:21 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 06:26:21 Check angles 06:26:21 SkyScan query 06:26:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.43<-20162 Statuses=0008 0009 06:26:21 Msec=750 True Az=112.995 Ze=-122.43 Az status=0008 Ze status=0009 06:26:22 Check angles 06:26:22 SkyScan query 06:26:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.025<-18735 Statuses=0008 0009 06:26:22 Msec=1500 True Az=112.995 Ze=-101.025 Az status=0008 Ze status=0009 06:26:22 Check angles 06:26:22 SkyScan query 06:26:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.59<-17306 Statuses=0008 0009 06:26:23 Msec=2250 True Az=112.995 Ze=-79.59 Az status=0008 Ze status=0009 06:26:23 Check angles 06:26:23 SkyScan query 06:26:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.635<-15909 Statuses=0008 0009 06:26:24 Msec=3000 True Az=112.995 Ze=-58.635 Az status=0008 Ze status=0009 06:26:24 Check angles 06:26:24 SkyScan query 06:26:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.665<-14511 Statuses=0008 0009 06:26:25 Msec=3750 True Az=112.995 Ze=-37.665 Az status=0008 Ze status=0009 06:26:25 Check angles 06:26:25 SkyScan query 06:26:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.725<-13115 Statuses=0008 0009 06:26:25 Msec=4500 True Az=112.995 Ze=-16.725 Az status=0008 Ze status=0009 06:26:25 Check angles 06:26:25 SkyScan query 06:26:26 SkyScan query done: ret=0 az=112.995<-7533 ze=4.215<-11719 Statuses=0008 0009 06:26:26 Msec=5250 True Az=112.995 Ze=4.215 Az status=0008 Ze status=0009 06:26:26 Check angles 06:26:26 SkyScan query 06:26:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:26:27 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:26:27 Message to Master queued w/err=0: serial=114831 error=0 06:26:32 Received message from Master: op=Filter serial=114832 06:26:32 Color wheel filter change from 0 to 0 06:26:32 FLIGetFilterPos err=0 currentPosition=0 06:26:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:26:32 Filter is already there-color wheel unchanged 06:26:32 Received message from Master: op=Shutter serial=114833 06:26:32 Shutter LASER close 06:26:32 Received message from Camera: op=State serial=114835 06:26:32 GetSingleValue result=40 Value=cccccccc 06:26:32 SkyScan query 06:26:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:26:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:33 Parameters OK 06:26:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:33 Set A/D data flow result=40 06:26:33 Set A/D channel type result=40 06:26:33 Set A/D encoding result=40 06:26:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:33 Set channel filter=0.000000e+000 result=40 06:26:33 Config A/D Result=40 06:26:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:33 Get A/D filter: -9.255963e+061 result=40 06:26:33 Get A/D value=-858993460 result=40 06:26:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:33 Parameters OK 06:26:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:33 Set A/D data flow result=40 06:26:33 Set A/D channel type result=40 06:26:33 Set A/D encoding result=40 06:26:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:33 Set channel filter=0.000000e+000 result=40 06:26:33 Config A/D Result=40 06:26:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:33 Get A/D filter: -9.255963e+061 result=40 06:26:33 Get A/D value=-858993460 result=40 06:26:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:26:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:26:33 Aux= 06:26:33 Message to Camera, serial 114835 queued 06:27:09 Received message from Master: op=PointingHead serial=114847 06:27:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:27:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:27:09 Point started: ret=0 06:27:09 point_skyscan result=0 06:27:10 Check angles 06:27:10 SkyScan query 06:27:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:27:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:27:10 Message to Master queued w/err=0: serial=114847 error=0 06:27:15 Received message from Master: op=Filter serial=114848 06:27:15 Color wheel filter change from 0 to 0 06:27:15 FLIGetFilterPos err=0 currentPosition=0 06:27:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:27:15 Filter is already there-color wheel unchanged 06:27:15 Received message from Master: op=Shutter serial=114849 06:27:15 Shutter LASER close 06:27:16 Received message from Camera: op=State serial=114851 06:27:16 GetSingleValue result=40 Value=cccccccc 06:27:16 SkyScan query 06:27:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:27:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:16 Parameters OK 06:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:16 Set A/D data flow result=40 06:27:16 Set A/D channel type result=40 06:27:16 Set A/D encoding result=40 06:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:16 Set channel filter=0.000000e+000 result=40 06:27:16 Config A/D Result=40 06:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:16 Get A/D filter: -9.255963e+061 result=40 06:27:16 Get A/D value=-858993460 result=40 06:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:16 Parameters OK 06:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:16 Set A/D data flow result=40 06:27:16 Set A/D channel type result=40 06:27:16 Set A/D encoding result=40 06:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:16 Set channel filter=0.000000e+000 result=40 06:27:16 Config A/D Result=40 06:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:16 Get A/D filter: -9.255963e+061 result=40 06:27:16 Get A/D value=-858993460 result=40 06:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:27:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:27:16 Aux= 06:27:16 Message to Camera, serial 114851 queued 06:27:53 Received message from Master: op=PointingHead serial=114864 06:27:53 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:27:53 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:27:53 Point started: ret=0 06:27:53 point_skyscan result=0 06:27:54 Check angles 06:27:54 SkyScan query 06:27:55 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 06:27:55 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 06:27:55 Check angles 06:27:55 SkyScan query 06:27:55 SkyScan query done: ret=0 az=153.795<-10253 ze=-6.495<-12433 Statuses=0009 0008 06:27:55 Msec=750 True Az=153.795 Ze=-6.495 Az status=0009 Ze status=0008 06:27:56 Check angles 06:27:56 SkyScan query 06:27:56 SkyScan query done: ret=0 az=171.36<-11424 ze=-6.495<-12433 Statuses=0009 0008 06:27:56 Msec=1500 True Az=171.36 Ze=-6.495 Az status=0009 Ze status=0008 06:27:56 Check angles 06:27:56 SkyScan query 06:27:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:27:57 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:27:57 Message to Master queued w/err=0: serial=114864 error=0 06:28:02 Received message from Master: op=Filter serial=114865 06:28:02 Color wheel filter change from 0 to 0 06:28:02 FLIGetFilterPos err=0 currentPosition=0 06:28:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:02 Filter is already there-color wheel unchanged 06:28:02 Received message from Master: op=Shutter serial=114866 06:28:02 Shutter LASER close 06:28:02 Received message from Camera: op=State serial=114868 06:28:02 GetSingleValue result=40 Value=cccccccc 06:28:02 SkyScan query 06:28:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:28:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:03 Parameters OK 06:28:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:03 Set A/D data flow result=40 06:28:03 Set A/D channel type result=40 06:28:03 Set A/D encoding result=40 06:28:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:03 Set channel filter=0.000000e+000 result=40 06:28:03 Config A/D Result=40 06:28:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:03 Get A/D filter: -9.255963e+061 result=40 06:28:03 Get A/D value=-858993460 result=40 06:28:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:03 Parameters OK 06:28:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:03 Set A/D data flow result=40 06:28:03 Set A/D channel type result=40 06:28:03 Set A/D encoding result=40 06:28:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:03 Set channel filter=0.000000e+000 result=40 06:28:03 Config A/D Result=40 06:28:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:03 Get A/D filter: -9.255963e+061 result=40 06:28:03 Get A/D value=-858993460 result=40 06:28:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:03 Aux= 06:28:03 Message to Camera, serial 114868 queued 06:28:39 Received message from Master: op=PointingHead serial=114881 06:28:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:28:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:28:40 Point started: ret=0 06:28:40 point_skyscan result=0 06:28:41 Check angles 06:28:41 SkyScan query 06:28:41 SkyScan query done: ret=0 az=152.61<-10174 ze=6.51<-11566 Statuses=0009 0008 06:28:41 Msec=0 True Az=152.61 Ze=6.51 Az status=0009 Ze status=0008 06:28:41 Check angles 06:28:41 SkyScan query 06:28:42 SkyScan query done: ret=0 az=135.12<-9008 ze=6.495<-11567 Statuses=0009 0008 06:28:42 Msec=750 True Az=135.12 Ze=6.495 Az status=0009 Ze status=0008 06:28:42 Check angles 06:28:42 SkyScan query 06:28:43 SkyScan query done: ret=0 az=117.345<-7823 ze=6.495<-11567 Statuses=0009 0008 06:28:43 Msec=1500 True Az=117.345 Ze=6.495 Az status=0009 Ze status=0008 06:28:43 Check angles 06:28:43 SkyScan query 06:28:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:28:43 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:28:43 Message to Master queued w/err=0: serial=114881 error=0 06:28:48 Received message from Master: op=Filter serial=114882 06:28:48 Color wheel filter change from 0 to 0 06:28:48 FLIGetFilterPos err=0 currentPosition=0 06:28:48 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:48 Filter is already there-color wheel unchanged 06:28:49 Received message from Master: op=Shutter serial=114883 06:28:49 Shutter LASER close 06:28:49 Received message from Camera: op=State serial=114885 06:28:49 GetSingleValue result=40 Value=cccccccc 06:28:49 SkyScan query 06:28:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:28:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:49 Parameters OK 06:28:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:49 Set A/D data flow result=40 06:28:49 Set A/D channel type result=40 06:28:49 Set A/D encoding result=40 06:28:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:49 Set channel filter=0.000000e+000 result=40 06:28:49 Config A/D Result=40 06:28:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:49 Get A/D filter: -9.255963e+061 result=40 06:28:49 Get A/D value=-858993460 result=40 06:28:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:49 Parameters OK 06:28:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:49 Set A/D data flow result=40 06:28:49 Set A/D channel type result=40 06:28:49 Set A/D encoding result=40 06:28:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:49 Set channel filter=0.000000e+000 result=40 06:28:49 Config A/D Result=40 06:28:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:49 Get A/D filter: -9.255963e+061 result=40 06:28:49 Get A/D value=-858993460 result=40 06:28:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:49 Aux= 06:28:49 Message to Camera, serial 114885 queued 06:29:26 Received message from Master: op=PointingHead serial=114898 06:29:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:29:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:29:26 Point started: ret=0 06:29:26 point_skyscan result=0 06:29:27 Check angles 06:29:27 SkyScan query 06:29:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 06:29:28 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 06:29:28 Check angles 06:29:28 SkyScan query 06:29:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 06:29:28 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 06:29:29 Check angles 06:29:29 SkyScan query 06:29:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.265<-16351 Statuses=0008 0009 06:29:29 Msec=1500 True Az=112.995 Ze=-65.265 Az status=0008 Ze status=0009 06:29:29 Check angles 06:29:29 SkyScan query 06:29:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.235<-17749 Statuses=0008 0009 06:29:30 Msec=2250 True Az=112.995 Ze=-86.235 Az status=0008 Ze status=0009 06:29:30 Check angles 06:29:30 SkyScan query 06:29:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.16<-19144 Statuses=0008 0009 06:29:31 Msec=3000 True Az=112.995 Ze=-107.16 Az status=0008 Ze status=0009 06:29:31 Check angles 06:29:31 SkyScan query 06:29:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.115<-20541 Statuses=0008 0009 06:29:31 Msec=3750 True Az=112.995 Ze=-128.115 Az status=0008 Ze status=0009 06:29:32 Check angles 06:29:32 SkyScan query 06:29:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.07<-21938 Statuses=0008 0009 06:29:32 Msec=4500 True Az=112.995 Ze=-149.07 Az status=0008 Ze status=0009 06:29:32 Check angles 06:29:32 SkyScan query 06:29:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.025<-23335 Statuses=0008 0009 06:29:33 Msec=5250 True Az=112.995 Ze=-170.025 Az status=0008 Ze status=0009 06:29:33 Check angles 06:29:33 SkyScan query 06:29:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:29:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:29:34 Message to Master queued w/err=0: serial=114898 error=0 06:29:39 Received message from Master: op=Filter serial=114899 06:29:39 Color wheel filter change from 0 to 0 06:29:39 FLIGetFilterPos err=0 currentPosition=0 06:29:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:29:39 Filter is already there-color wheel unchanged 06:29:39 Received message from Master: op=Shutter serial=114900 06:29:39 Shutter LASER open 06:29:39 Received message from Camera: op=State serial=114902 06:29:39 GetSingleValue result=40 Value=cccccccc 06:29:39 SkyScan query 06:29:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:29:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:40 Parameters OK 06:29:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:40 Set A/D data flow result=40 06:29:40 Set A/D channel type result=40 06:29:40 Set A/D encoding result=40 06:29:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:40 Set channel filter=0.000000e+000 result=40 06:29:40 Config A/D Result=40 06:29:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:40 Get A/D filter: -9.255963e+061 result=40 06:29:40 Get A/D value=-858993460 result=40 06:29:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:40 Parameters OK 06:29:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:40 Set A/D data flow result=40 06:29:40 Set A/D channel type result=40 06:29:40 Set A/D encoding result=40 06:29:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:40 Set channel filter=0.000000e+000 result=40 06:29:40 Config A/D Result=40 06:29:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:40 Get A/D filter: -9.255963e+061 result=40 06:29:40 Get A/D value=-858993460 result=40 06:29:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:29:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:29:40 Aux= 06:29:40 Message to Camera, serial 114902 queued 06:29:48 Received message from Master: op=Shutter serial=114912 06:29:48 Shutter LASER close 06:29:48 Received message from Master: op=PointingHead serial=114916 06:29:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:29:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:29:49 Point started: ret=0 06:29:49 point_skyscan result=0 06:29:50 Check angles 06:29:50 SkyScan query 06:29:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 06:29:50 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 06:29:50 Check angles 06:29:50 SkyScan query 06:29:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.46<-20164 Statuses=0008 0009 06:29:51 Msec=750 True Az=112.995 Ze=-122.46 Az status=0008 Ze status=0009 06:29:51 Check angles 06:29:51 SkyScan query 06:29:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.49<-18766 Statuses=0008 0009 06:29:52 Msec=1500 True Az=112.995 Ze=-101.49 Az status=0008 Ze status=0009 06:29:52 Check angles 06:29:52 SkyScan query 06:29:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 06:29:52 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 06:29:53 Check angles 06:29:53 SkyScan query 06:29:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 06:29:53 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 06:29:53 Check angles 06:29:53 SkyScan query 06:29:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.13<-14542 Statuses=0008 0009 06:29:54 Msec=3750 True Az=112.995 Ze=-38.13 Az status=0008 Ze status=0009 06:29:54 Check angles 06:29:54 SkyScan query 06:29:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.205<-13147 Statuses=0008 0009 06:29:55 Msec=4500 True Az=112.995 Ze=-17.205 Az status=0008 Ze status=0009 06:29:55 Check angles 06:29:55 SkyScan query 06:29:55 SkyScan query done: ret=0 az=112.995<-7533 ze=4.2<-11720 Statuses=0008 0009 06:29:55 Msec=5250 True Az=112.995 Ze=4.2 Az status=0008 Ze status=0009 06:29:56 Check angles 06:29:56 SkyScan query 06:29:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:29:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:29:56 Message to Master queued w/err=0: serial=114916 error=0 06:30:01 Received message from Master: op=Filter serial=114917 06:30:01 Color wheel filter change from 0 to 0 06:30:01 FLIGetFilterPos err=0 currentPosition=0 06:30:01 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:01 Filter is already there-color wheel unchanged 06:30:01 Received message from Master: op=Shutter serial=114918 06:30:01 Shutter LASER close 06:30:02 Received message from Camera: op=State serial=114920 06:30:02 GetSingleValue result=40 Value=cccccccc 06:30:02 SkyScan query 06:30:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:30:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:02 Parameters OK 06:30:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:02 Set A/D data flow result=40 06:30:02 Set A/D channel type result=40 06:30:02 Set A/D encoding result=40 06:30:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:02 Set channel filter=0.000000e+000 result=40 06:30:02 Config A/D Result=40 06:30:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:02 Get A/D filter: -9.255963e+061 result=40 06:30:02 Get A/D value=-858993460 result=40 06:30:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:02 Parameters OK 06:30:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:02 Set A/D data flow result=40 06:30:02 Set A/D channel type result=40 06:30:02 Set A/D encoding result=40 06:30:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:02 Set channel filter=0.000000e+000 result=40 06:30:02 Config A/D Result=40 06:30:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:02 Get A/D filter: -9.255963e+061 result=40 06:30:02 Get A/D value=-858993460 result=40 06:30:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:02 Aux= 06:30:02 Message to Camera, serial 114920 queued 06:30:39 Received message from Master: op=PointingHead serial=114933 06:30:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:30:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:30:39 Point started: ret=0 06:30:39 point_skyscan result=0 06:30:40 Check angles 06:30:40 SkyScan query 06:30:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:30:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:30:41 Message to Master queued w/err=0: serial=114933 error=0 06:30:46 Received message from Master: op=Filter serial=114934 06:30:46 Color wheel filter change from 0 to 0 06:30:46 FLIGetFilterPos err=0 currentPosition=0 06:30:46 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:46 Filter is already there-color wheel unchanged 06:30:46 Received message from Master: op=Shutter serial=114935 06:30:46 Shutter LASER close 06:30:46 Received message from Camera: op=State serial=114937 06:30:46 GetSingleValue result=40 Value=cccccccc 06:30:46 SkyScan query 06:30:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:30:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:46 Parameters OK 06:30:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:46 Set A/D data flow result=40 06:30:46 Set A/D channel type result=40 06:30:46 Set A/D encoding result=40 06:30:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:46 Set channel filter=0.000000e+000 result=40 06:30:46 Config A/D Result=40 06:30:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:46 Get A/D filter: -9.255963e+061 result=40 06:30:46 Get A/D value=-858993460 result=40 06:30:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:46 Parameters OK 06:30:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:46 Set A/D data flow result=40 06:30:46 Set A/D channel type result=40 06:30:46 Set A/D encoding result=40 06:30:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:46 Set channel filter=0.000000e+000 result=40 06:30:46 Config A/D Result=40 06:30:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:46 Get A/D filter: -9.255963e+061 result=40 06:30:46 Get A/D value=-858993460 result=40 06:30:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:46 Aux= 06:30:46 Message to Camera, serial 114937 queued 06:31:23 Received message from Master: op=PointingHead serial=114950 06:31:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:31:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:31:24 Point started: ret=0 06:31:24 point_skyscan result=0 06:31:24 Check angles 06:31:24 SkyScan query 06:31:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:31:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:31:25 Message to Master queued w/err=0: serial=114950 error=0 06:31:30 Received message from Master: op=Filter serial=114951 06:31:30 Color wheel filter change from 0 to 0 06:31:30 FLIGetFilterPos err=0 currentPosition=0 06:31:30 FLIGetStepsRemaining err=0 RemainingSteps=0 06:31:30 Filter is already there-color wheel unchanged 06:31:30 Received message from Master: op=Shutter serial=114952 06:31:30 Shutter LASER close 06:31:30 Received message from Camera: op=State serial=114954 06:31:30 GetSingleValue result=40 Value=cccccccc 06:31:30 SkyScan query 06:31:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:31:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:31 Parameters OK 06:31:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:31 Set A/D data flow result=40 06:31:31 Set A/D channel type result=40 06:31:31 Set A/D encoding result=40 06:31:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:31 Set channel filter=0.000000e+000 result=40 06:31:31 Config A/D Result=40 06:31:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:31 Get A/D filter: -9.255963e+061 result=40 06:31:31 Get A/D value=-858993460 result=40 06:31:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:31 Parameters OK 06:31:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:31 Set A/D data flow result=40 06:31:31 Set A/D channel type result=40 06:31:31 Set A/D encoding result=40 06:31:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:31 Set channel filter=0.000000e+000 result=40 06:31:31 Config A/D Result=40 06:31:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:31 Get A/D filter: -9.255963e+061 result=40 06:31:31 Get A/D value=-858993460 result=40 06:31:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:31:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:31:31 Aux= 06:31:31 Message to Camera, serial 114954 queued 06:32:07 Received message from Master: op=PointingHead serial=114966 06:32:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:32:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:32:07 Point started: ret=0 06:32:07 point_skyscan result=0 06:32:08 Check angles 06:32:08 SkyScan query 06:32:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:32:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:32:08 Message to Master queued w/err=0: serial=114966 error=0 06:32:13 Received message from Master: op=Filter serial=114967 06:32:13 Color wheel filter change from 0 to 0 06:32:13 FLIGetFilterPos err=0 currentPosition=0 06:32:13 FLIGetStepsRemaining err=0 RemainingSteps=0 06:32:13 Filter is already there-color wheel unchanged 06:32:13 Received message from Master: op=Shutter serial=114968 06:32:13 Shutter LASER close 06:32:14 Received message from Camera: op=State serial=114970 06:32:14 GetSingleValue result=40 Value=cccccccc 06:32:14 SkyScan query 06:32:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:32:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:14 Parameters OK 06:32:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:14 Set A/D data flow result=40 06:32:14 Set A/D channel type result=40 06:32:14 Set A/D encoding result=40 06:32:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:14 Set channel filter=0.000000e+000 result=40 06:32:14 Config A/D Result=40 06:32:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:14 Get A/D filter: -9.255963e+061 result=40 06:32:14 Get A/D value=-858993460 result=40 06:32:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:14 Parameters OK 06:32:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:14 Set A/D data flow result=40 06:32:14 Set A/D channel type result=40 06:32:14 Set A/D encoding result=40 06:32:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:14 Set channel filter=0.000000e+000 result=40 06:32:14 Config A/D Result=40 06:32:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:14 Get A/D filter: -9.255963e+061 result=40 06:32:14 Get A/D value=-858993460 result=40 06:32:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:32:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:32:14 Aux= 06:32:14 Message to Camera, serial 114970 queued 06:32:50 Received message from Master: op=PointingHead serial=114982 06:32:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:32:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:32:50 Point started: ret=0 06:32:50 point_skyscan result=0 06:32:51 Check angles 06:32:51 SkyScan query 06:32:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.52<-13568 Statuses=0008 0009 06:32:52 Msec=0 True Az=112.995 Ze=-23.52 Az status=0008 Ze status=0009 06:32:52 Check angles 06:32:52 SkyScan query 06:32:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.97<-14998 Statuses=0008 0009 06:32:52 Msec=750 True Az=112.995 Ze=-44.97 Az status=0008 Ze status=0009 06:32:53 Check angles 06:32:53 SkyScan query 06:32:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.865<-16391 Statuses=0008 0009 06:32:53 Msec=1500 True Az=112.995 Ze=-65.865 Az status=0008 Ze status=0009 06:32:53 Check angles 06:32:53 SkyScan query 06:32:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.82<-17788 Statuses=0008 0009 06:32:54 Msec=2250 True Az=112.995 Ze=-86.82 Az status=0008 Ze status=0009 06:32:54 Check angles 06:32:54 SkyScan query 06:32:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.775<-19185 Statuses=0008 0009 06:32:55 Msec=3000 True Az=112.995 Ze=-107.775 Az status=0008 Ze status=0009 06:32:55 Check angles 06:32:55 SkyScan query 06:32:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.715<-20581 Statuses=0008 0009 06:32:55 Msec=3750 True Az=112.995 Ze=-128.715 Az status=0008 Ze status=0009 06:32:56 Check angles 06:32:56 SkyScan query 06:32:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.15<-22010 Statuses=0008 0009 06:32:56 Msec=4500 True Az=112.995 Ze=-150.15 Az status=0008 Ze status=0009 06:32:56 Check angles 06:32:56 SkyScan query 06:32:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.97<-23398 Statuses=0008 0009 06:32:57 Msec=5250 True Az=112.995 Ze=-170.97 Az status=0008 Ze status=0009 06:32:57 Check angles 06:32:57 SkyScan query 06:32:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:32:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:32:58 Message to Master queued w/err=0: serial=114982 error=0 06:33:03 Received message from Master: op=Filter serial=114983 06:33:03 Color wheel filter change from 0 to 0 06:33:03 FLIGetFilterPos err=0 currentPosition=0 06:33:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:03 Filter is already there-color wheel unchanged 06:33:03 Received message from Master: op=Shutter serial=114984 06:33:03 Shutter LASER open 06:33:03 Received message from Camera: op=State serial=114986 06:33:03 GetSingleValue result=40 Value=cccccccc 06:33:03 SkyScan query 06:33:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:33:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:04 Parameters OK 06:33:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:04 Set A/D data flow result=40 06:33:04 Set A/D channel type result=40 06:33:04 Set A/D encoding result=40 06:33:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:04 Set channel filter=0.000000e+000 result=40 06:33:04 Config A/D Result=40 06:33:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:04 Get A/D filter: -9.255963e+061 result=40 06:33:04 Get A/D value=-858993460 result=40 06:33:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:04 Parameters OK 06:33:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:04 Set A/D data flow result=40 06:33:04 Set A/D channel type result=40 06:33:04 Set A/D encoding result=40 06:33:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:04 Set channel filter=0.000000e+000 result=40 06:33:04 Config A/D Result=40 06:33:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:04 Get A/D filter: -9.255963e+061 result=40 06:33:04 Get A/D value=-858993460 result=40 06:33:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:04 Aux= 06:33:04 Message to Camera, serial 114986 queued 06:33:12 Received message from Master: op=Shutter serial=114996 06:33:12 Shutter LASER close 06:33:13 Received message from Master: op=PointingHead serial=115000 06:33:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:33:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:33:13 Point started: ret=0 06:33:13 point_skyscan result=0 06:33:14 Check angles 06:33:14 SkyScan query 06:33:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 06:33:14 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 06:33:14 Check angles 06:33:14 SkyScan query 06:33:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.965<-20131 Statuses=0008 0009 06:33:15 Msec=750 True Az=112.995 Ze=-121.965 Az status=0008 Ze status=0009 06:33:15 Check angles 06:33:15 SkyScan query 06:33:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.04<-18736 Statuses=0008 0009 06:33:16 Msec=1500 True Az=112.995 Ze=-101.04 Az status=0008 Ze status=0009 06:33:16 Check angles 06:33:16 SkyScan query 06:33:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 06:33:17 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 06:33:17 Check angles 06:33:17 SkyScan query 06:33:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 06:33:17 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 06:33:17 Check angles 06:33:17 SkyScan query 06:33:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.695<-14513 Statuses=0008 0009 06:33:18 Msec=3750 True Az=112.995 Ze=-37.695 Az status=0008 Ze status=0009 06:33:18 Check angles 06:33:18 SkyScan query 06:33:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.74<-13116 Statuses=0008 0009 06:33:19 Msec=4500 True Az=112.995 Ze=-16.74 Az status=0008 Ze status=0009 06:33:19 Check angles 06:33:19 SkyScan query 06:33:20 SkyScan query done: ret=0 az=112.995<-7533 ze=4.2<-11720 Statuses=0008 0009 06:33:20 Msec=5250 True Az=112.995 Ze=4.2 Az status=0008 Ze status=0009 06:33:20 Check angles 06:33:20 SkyScan query 06:33:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:33:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:33:20 Message to Master queued w/err=0: serial=115000 error=0 06:33:25 Received message from Master: op=Filter serial=115001 06:33:25 Color wheel filter change from 0 to 0 06:33:25 FLIGetFilterPos err=0 currentPosition=0 06:33:25 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:25 Filter is already there-color wheel unchanged 06:33:25 Received message from Master: op=Shutter serial=115002 06:33:25 Shutter LASER close 06:33:26 Received message from Camera: op=State serial=115004 06:33:26 GetSingleValue result=40 Value=cccccccc 06:33:26 SkyScan query 06:33:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:33:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:26 Parameters OK 06:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:26 Set A/D data flow result=40 06:33:26 Set A/D channel type result=40 06:33:26 Set A/D encoding result=40 06:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:26 Set channel filter=0.000000e+000 result=40 06:33:26 Config A/D Result=40 06:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:26 Get A/D filter: -9.255963e+061 result=40 06:33:26 Get A/D value=-858993460 result=40 06:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:26 Parameters OK 06:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:26 Set A/D data flow result=40 06:33:26 Set A/D channel type result=40 06:33:26 Set A/D encoding result=40 06:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:26 Set channel filter=0.000000e+000 result=40 06:33:26 Config A/D Result=40 06:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:26 Get A/D filter: -9.255963e+061 result=40 06:33:26 Get A/D value=-858993460 result=40 06:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:26 Aux= 06:33:26 Message to Camera, serial 115004 queued 06:33:38 Received message from Master: op=Identify serial=115005 06:34:03 Received message from Master: op=PointingHead serial=115020 06:34:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:34:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:34:03 Point started: ret=0 06:34:03 point_skyscan result=0 06:34:04 Check angles 06:34:04 SkyScan query 06:34:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:34:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:34:05 Message to Master queued w/err=0: serial=115020 error=0 06:34:10 Received message from Master: op=Filter serial=115021 06:34:10 Color wheel filter change from 0 to 0 06:34:10 FLIGetFilterPos err=0 currentPosition=0 06:34:10 FLIGetStepsRemaining err=0 RemainingSteps=0 06:34:10 Filter is already there-color wheel unchanged 06:34:10 Received message from Master: op=Shutter serial=115022 06:34:10 Shutter LASER close 06:34:10 Received message from Camera: op=State serial=115024 06:34:10 GetSingleValue result=40 Value=cccccccc 06:34:10 SkyScan query 06:34:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 [UTC 2019-3-5 06:34:10] 06:34:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:11 Parameters OK 06:34:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:11 Set A/D data flow result=40 06:34:11 Set A/D channel type result=40 06:34:11 Set A/D encoding result=40 06:34:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:11 Set channel filter=0.000000e+000 result=40 06:34:11 Config A/D Result=40 06:34:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:11 Get A/D filter: -9.255963e+061 result=40 06:34:11 Get A/D value=-858993460 result=40 06:34:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:11 Parameters OK 06:34:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:11 Set A/D data flow result=40 06:34:11 Set A/D channel type result=40 06:34:11 Set A/D encoding result=40 06:34:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:11 Set channel filter=0.000000e+000 result=40 06:34:11 Config A/D Result=40 06:34:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:11 Get A/D filter: -9.255963e+061 result=40 06:34:11 Get A/D value=-858993460 result=40 06:34:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:34:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:34:11 Aux= 06:34:11 Message to Camera, serial 115024 queued 06:34:47 Received message from Master: op=PointingHead serial=115037 06:34:47 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:34:47 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:34:48 Point started: ret=0 06:34:48 point_skyscan result=0 06:34:48 Check angles 06:34:48 SkyScan query 06:34:49 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 06:34:49 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 06:34:49 Check angles 06:34:49 SkyScan query 06:34:50 SkyScan query done: ret=0 az=153.795<-10253 ze=-6.495<-12433 Statuses=0009 0008 06:34:50 Msec=750 True Az=153.795 Ze=-6.495 Az status=0009 Ze status=0008 06:34:50 Check angles 06:34:50 SkyScan query 06:34:51 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 06:34:51 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 06:34:51 Check angles 06:34:51 SkyScan query 06:34:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:34:51 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:34:51 Message to Master queued w/err=0: serial=115037 error=0 06:34:56 Received message from Master: op=Filter serial=115038 06:34:56 Color wheel filter change from 0 to 0 06:34:56 FLIGetFilterPos err=0 currentPosition=0 06:34:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:34:56 Filter is already there-color wheel unchanged 06:34:56 Received message from Master: op=Shutter serial=115039 06:34:56 Shutter LASER close 06:34:56 Received message from Camera: op=State serial=115041 06:34:56 GetSingleValue result=40 Value=cccccccc 06:34:56 SkyScan query 06:34:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:34:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:57 Parameters OK 06:34:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:57 Set A/D data flow result=40 06:34:57 Set A/D channel type result=40 06:34:57 Set A/D encoding result=40 06:34:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:57 Set channel filter=0.000000e+000 result=40 06:34:57 Config A/D Result=40 06:34:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:57 Get A/D filter: -9.255963e+061 result=40 06:34:57 Get A/D value=-858993460 result=40 06:34:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:57 Parameters OK 06:34:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:57 Set A/D data flow result=40 06:34:57 Set A/D channel type result=40 06:34:57 Set A/D encoding result=40 06:34:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:57 Set channel filter=0.000000e+000 result=40 06:34:57 Config A/D Result=40 06:34:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:57 Get A/D filter: -9.255963e+061 result=40 06:34:57 Get A/D value=-858993460 result=40 06:34:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:34:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:34:57 Aux= 06:34:57 Message to Camera, serial 115041 queued 06:35:34 Received message from Master: op=PointingHead serial=115054 06:35:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:35:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:35:34 Point started: ret=0 06:35:34 point_skyscan result=0 06:35:35 Check angles 06:35:35 SkyScan query 06:35:36 SkyScan query done: ret=0 az=152.52<-10168 ze=6.51<-11566 Statuses=0009 0008 06:35:36 Msec=0 True Az=152.52 Ze=6.51 Az status=0009 Ze status=0008 06:35:36 Check angles 06:35:36 SkyScan query 06:35:36 SkyScan query done: ret=0 az=135.045<-9003 ze=6.495<-11567 Statuses=0009 0008 06:35:36 Msec=750 True Az=135.045 Ze=6.495 Az status=0009 Ze status=0008 06:35:37 Check angles 06:35:37 SkyScan query 06:35:37 SkyScan query done: ret=0 az=117.615<-7841 ze=6.495<-11567 Statuses=0009 0008 06:35:37 Msec=1500 True Az=117.615 Ze=6.495 Az status=0009 Ze status=0008 06:35:37 Check angles 06:35:37 SkyScan query 06:35:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:35:38 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:35:38 Message to Master queued w/err=0: serial=115054 error=0 06:35:43 Received message from Master: op=Filter serial=115055 06:35:43 Color wheel filter change from 0 to 0 06:35:43 FLIGetFilterPos err=0 currentPosition=0 06:35:43 FLIGetStepsRemaining err=0 RemainingSteps=0 06:35:43 Filter is already there-color wheel unchanged 06:35:43 Received message from Master: op=Shutter serial=115056 06:35:43 Shutter LASER close 06:35:43 Received message from Camera: op=State serial=115058 06:35:43 GetSingleValue result=40 Value=cccccccc 06:35:43 SkyScan query 06:35:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:35:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:44 Parameters OK 06:35:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:44 Set A/D data flow result=40 06:35:44 Set A/D channel type result=40 06:35:44 Set A/D encoding result=40 06:35:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:44 Set channel filter=0.000000e+000 result=40 06:35:44 Config A/D Result=40 06:35:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:44 Get A/D filter: -9.255963e+061 result=40 06:35:44 Get A/D value=-858993460 result=40 06:35:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:44 Parameters OK 06:35:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:44 Set A/D data flow result=40 06:35:44 Set A/D channel type result=40 06:35:44 Set A/D encoding result=40 06:35:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:44 Set channel filter=0.000000e+000 result=40 06:35:44 Config A/D Result=40 06:35:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:44 Get A/D filter: -9.255963e+061 result=40 06:35:44 Get A/D value=-858993460 result=40 06:35:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:35:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:35:44 Aux= 06:35:44 Message to Camera, serial 115058 queued 06:36:20 Received message from Master: op=PointingHead serial=115071 06:36:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:36:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:36:21 Point started: ret=0 06:36:21 point_skyscan result=0 06:36:22 Check angles 06:36:22 SkyScan query 06:36:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.625<-13575 Statuses=0008 0009 06:36:22 Msec=0 True Az=112.995 Ze=-23.625 Az status=0008 Ze status=0009 06:36:22 Check angles 06:36:22 SkyScan query 06:36:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.61<-14974 Statuses=0008 0009 06:36:23 Msec=750 True Az=112.995 Ze=-44.61 Az status=0008 Ze status=0009 06:36:23 Check angles 06:36:23 SkyScan query 06:36:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.97<-16398 Statuses=0008 0009 06:36:24 Msec=1500 True Az=112.995 Ze=-65.97 Az status=0008 Ze status=0009 06:36:24 Check angles 06:36:24 SkyScan query 06:36:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.91<-17794 Statuses=0008 0009 06:36:24 Msec=2250 True Az=112.995 Ze=-86.91 Az status=0008 Ze status=0009 06:36:25 Check angles 06:36:25 SkyScan query 06:36:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.88<-19192 Statuses=0008 0009 06:36:25 Msec=3000 True Az=112.995 Ze=-107.88 Az status=0008 Ze status=0009 06:36:25 Check angles 06:36:25 SkyScan query 06:36:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.3<-20620 Statuses=0008 0009 06:36:26 Msec=3750 True Az=112.995 Ze=-129.3 Az status=0008 Ze status=0009 06:36:26 Check angles 06:36:26 SkyScan query 06:36:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.255<-22017 Statuses=0008 0009 06:36:27 Msec=4500 True Az=112.995 Ze=-150.255 Az status=0008 Ze status=0009 06:36:27 Check angles 06:36:27 SkyScan query 06:36:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.045<-23403 Statuses=0008 0009 06:36:27 Msec=5250 True Az=112.995 Ze=-171.045 Az status=0008 Ze status=0009 06:36:28 Check angles 06:36:28 SkyScan query 06:36:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:36:28 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:36:28 Message to Master queued w/err=0: serial=115071 error=0 06:36:33 Received message from Master: op=Filter serial=115072 06:36:33 Color wheel filter change from 0 to 0 06:36:33 FLIGetFilterPos err=0 currentPosition=0 06:36:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:36:33 Filter is already there-color wheel unchanged 06:36:33 Received message from Master: op=Shutter serial=115073 06:36:33 Shutter LASER open 06:36:34 Received message from Camera: op=State serial=115075 06:36:34 GetSingleValue result=40 Value=cccccccc 06:36:34 SkyScan query 06:36:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:36:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:34 Parameters OK 06:36:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:34 Set A/D data flow result=40 06:36:34 Set A/D channel type result=40 06:36:34 Set A/D encoding result=40 06:36:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:34 Set channel filter=0.000000e+000 result=40 06:36:34 Config A/D Result=40 06:36:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:34 Get A/D filter: -9.255963e+061 result=40 06:36:34 Get A/D value=-858993460 result=40 06:36:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:34 Parameters OK 06:36:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:34 Set A/D data flow result=40 06:36:34 Set A/D channel type result=40 06:36:34 Set A/D encoding result=40 06:36:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:34 Set channel filter=0.000000e+000 result=40 06:36:34 Config A/D Result=40 06:36:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:34 Get A/D filter: -9.255963e+061 result=40 06:36:34 Get A/D value=-858993460 result=40 06:36:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:36:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:36:34 Aux= 06:36:34 Message to Camera, serial 115075 queued 06:36:43 Received message from Master: op=Shutter serial=115085 06:36:43 Shutter LASER close 06:36:43 Received message from Master: op=PointingHead serial=115089 06:36:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:36:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:36:43 Point started: ret=0 06:36:43 point_skyscan result=0 06:36:44 Check angles 06:36:44 SkyScan query 06:36:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.01<-21534 Statuses=0008 0009 06:36:45 Msec=0 True Az=112.995 Ze=-143.01 Az status=0008 Ze status=0009 06:36:45 Check angles 06:36:45 SkyScan query 06:36:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 06:36:45 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 06:36:46 Check angles 06:36:46 SkyScan query 06:36:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 06:36:46 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 06:36:46 Check angles 06:36:46 SkyScan query 06:36:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 06:36:47 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 06:36:47 Check angles 06:36:47 SkyScan query 06:36:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 06:36:48 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 06:36:48 Check angles 06:36:48 SkyScan query 06:36:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.19<-14546 Statuses=0008 0009 06:36:48 Msec=3750 True Az=112.995 Ze=-38.19 Az status=0008 Ze status=0009 06:36:49 Check angles 06:36:49 SkyScan query 06:36:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.265<-13151 Statuses=0008 0009 06:36:49 Msec=4500 True Az=112.995 Ze=-17.265 Az status=0008 Ze status=0009 06:36:49 Check angles 06:36:49 SkyScan query 06:36:50 SkyScan query done: ret=0 az=112.995<-7533 ze=4.14<-11724 Statuses=0008 0009 06:36:50 Msec=5250 True Az=112.995 Ze=4.14 Az status=0008 Ze status=0009 06:36:50 Check angles 06:36:50 SkyScan query 06:36:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:36:51 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:36:51 Message to Master queued w/err=0: serial=115089 error=0 06:36:56 Received message from Master: op=Filter serial=115090 06:36:56 Color wheel filter change from 0 to 0 06:36:56 FLIGetFilterPos err=0 currentPosition=0 06:36:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:36:56 Filter is already there-color wheel unchanged 06:36:56 Received message from Master: op=Shutter serial=115091 06:36:56 Shutter LASER close 06:36:56 Received message from Camera: op=State serial=115093 06:36:56 GetSingleValue result=40 Value=cccccccc 06:36:56 SkyScan query 06:36:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:36:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:57 Parameters OK 06:36:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:57 Set A/D data flow result=40 06:36:57 Set A/D channel type result=40 06:36:57 Set A/D encoding result=40 06:36:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:57 Set channel filter=0.000000e+000 result=40 06:36:57 Config A/D Result=40 06:36:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:57 Get A/D filter: -9.255963e+061 result=40 06:36:57 Get A/D value=-858993460 result=40 06:36:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:57 Parameters OK 06:36:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:57 Set A/D data flow result=40 06:36:57 Set A/D channel type result=40 06:36:57 Set A/D encoding result=40 06:36:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:57 Set channel filter=0.000000e+000 result=40 06:36:57 Config A/D Result=40 06:36:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:57 Get A/D filter: -9.255963e+061 result=40 06:36:57 Get A/D value=-858993460 result=40 06:36:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:36:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:36:57 Aux= 06:36:57 Message to Camera, serial 115093 queued 06:37:33 Received message from Master: op=PointingHead serial=115106 06:37:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:37:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:37:34 Point started: ret=0 06:37:34 point_skyscan result=0 06:37:35 Check angles 06:37:35 SkyScan query 06:37:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:37:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:37:35 Message to Master queued w/err=0: serial=115106 error=0 06:37:40 Received message from Master: op=Filter serial=115107 06:37:40 Color wheel filter change from 0 to 0 06:37:40 FLIGetFilterPos err=0 currentPosition=0 06:37:40 FLIGetStepsRemaining err=0 RemainingSteps=0 06:37:40 Filter is already there-color wheel unchanged 06:37:40 Received message from Master: op=Shutter serial=115108 06:37:40 Shutter LASER close 06:37:40 Received message from Camera: op=State serial=115110 06:37:40 GetSingleValue result=40 Value=cccccccc 06:37:40 SkyScan query 06:37:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:37:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:41 Parameters OK 06:37:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:41 Set A/D data flow result=40 06:37:41 Set A/D channel type result=40 06:37:41 Set A/D encoding result=40 06:37:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:41 Set channel filter=0.000000e+000 result=40 06:37:41 Config A/D Result=40 06:37:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:41 Get A/D filter: -9.255963e+061 result=40 06:37:41 Get A/D value=-858993460 result=40 06:37:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:41 Parameters OK 06:37:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:41 Set A/D data flow result=40 06:37:41 Set A/D channel type result=40 06:37:41 Set A/D encoding result=40 06:37:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:41 Set channel filter=0.000000e+000 result=40 06:37:41 Config A/D Result=40 06:37:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:41 Get A/D filter: -9.255963e+061 result=40 06:37:41 Get A/D value=-858993460 result=40 06:37:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:37:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:37:41 Aux= 06:37:41 Message to Camera, serial 115110 queued 06:38:18 Received message from Master: op=PointingHead serial=115123 06:38:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:38:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:38:18 Point started: ret=0 06:38:18 point_skyscan result=0 06:38:19 Check angles 06:38:19 SkyScan query 06:38:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:38:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:38:19 Message to Master queued w/err=0: serial=115123 error=0 06:38:24 Received message from Master: op=Filter serial=115124 06:38:24 Color wheel filter change from 0 to 0 06:38:24 FLIGetFilterPos err=0 currentPosition=0 06:38:24 FLIGetStepsRemaining err=0 RemainingSteps=0 06:38:24 Filter is already there-color wheel unchanged 06:38:25 Received message from Master: op=Shutter serial=115125 06:38:25 Shutter LASER close 06:38:25 Received message from Camera: op=State serial=115127 06:38:25 GetSingleValue result=40 Value=cccccccc 06:38:25 SkyScan query 06:38:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:38:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:25 Parameters OK 06:38:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:25 Set A/D data flow result=40 06:38:25 Set A/D channel type result=40 06:38:25 Set A/D encoding result=40 06:38:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:25 Set channel filter=0.000000e+000 result=40 06:38:25 Config A/D Result=40 06:38:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:25 Get A/D filter: -9.255963e+061 result=40 06:38:25 Get A/D value=-858993460 result=40 06:38:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:25 Parameters OK 06:38:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:25 Set A/D data flow result=40 06:38:25 Set A/D channel type result=40 06:38:25 Set A/D encoding result=40 06:38:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:25 Set channel filter=0.000000e+000 result=40 06:38:25 Config A/D Result=40 06:38:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:25 Get A/D filter: -9.255963e+061 result=40 06:38:25 Get A/D value=-858993460 result=40 06:38:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:38:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:38:25 Aux= 06:38:25 Message to Camera, serial 115127 queued 06:39:02 Received message from Master: op=PointingHead serial=115140 06:39:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:39:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:39:02 Point started: ret=0 06:39:02 point_skyscan result=0 06:39:03 Check angles 06:39:03 SkyScan query 06:39:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:39:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:39:04 Message to Master queued w/err=0: serial=115140 error=0 06:39:09 Received message from Master: op=Filter serial=115141 06:39:09 Color wheel filter change from 0 to 0 06:39:09 FLIGetFilterPos err=0 currentPosition=0 06:39:09 FLIGetStepsRemaining err=0 RemainingSteps=0 06:39:09 Filter is already there-color wheel unchanged 06:39:09 Received message from Master: op=Shutter serial=115142 06:39:09 Shutter LASER close 06:39:09 Received message from Camera: op=State serial=115144 06:39:09 GetSingleValue result=40 Value=cccccccc 06:39:09 SkyScan query 06:39:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:39:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:10 Parameters OK 06:39:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:10 Set A/D data flow result=40 06:39:10 Set A/D channel type result=40 06:39:10 Set A/D encoding result=40 06:39:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:10 Set channel filter=0.000000e+000 result=40 06:39:10 Config A/D Result=40 06:39:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:10 Get A/D filter: -9.255963e+061 result=40 06:39:10 Get A/D value=-858993460 result=40 06:39:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:10 Parameters OK 06:39:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:10 Set A/D data flow result=40 06:39:10 Set A/D channel type result=40 06:39:10 Set A/D encoding result=40 06:39:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:10 Set channel filter=0.000000e+000 result=40 06:39:10 Config A/D Result=40 06:39:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:10 Get A/D filter: -9.255963e+061 result=40 06:39:10 Get A/D value=-858993460 result=40 06:39:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:39:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:39:10 Aux= 06:39:10 Message to Camera, serial 115144 queued 06:39:46 Received message from Master: op=PointingHead serial=115157 06:39:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:39:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:39:47 Point started: ret=0 06:39:47 point_skyscan result=0 06:39:47 Check angles 06:39:47 SkyScan query 06:39:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.535<-13569 Statuses=0008 0009 06:39:48 Msec=0 True Az=112.995 Ze=-23.535 Az status=0008 Ze status=0009 06:39:48 Check angles 06:39:48 SkyScan query 06:39:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.505<-14967 Statuses=0008 0009 06:39:49 Msec=750 True Az=112.995 Ze=-44.505 Az status=0008 Ze status=0009 06:39:49 Check angles 06:39:49 SkyScan query 06:39:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.445<-16363 Statuses=0008 0009 06:39:50 Msec=1500 True Az=112.995 Ze=-65.445 Az status=0008 Ze status=0009 06:39:50 Check angles 06:39:50 SkyScan query 06:39:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.385<-17759 Statuses=0008 0009 06:39:50 Msec=2250 True Az=112.995 Ze=-86.385 Az status=0008 Ze status=0009 06:39:50 Check angles 06:39:50 SkyScan query 06:39:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.37<-19158 Statuses=0008 0009 06:39:51 Msec=3000 True Az=112.995 Ze=-107.37 Az status=0008 Ze status=0009 06:39:51 Check angles 06:39:51 SkyScan query 06:39:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.295<-20553 Statuses=0008 0009 06:39:52 Msec=3750 True Az=112.995 Ze=-128.295 Az status=0008 Ze status=0009 06:39:52 Check angles 06:39:52 SkyScan query 06:39:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.265<-21951 Statuses=0008 0009 06:39:53 Msec=4500 True Az=112.995 Ze=-149.265 Az status=0008 Ze status=0009 06:39:53 Check angles 06:39:53 SkyScan query 06:39:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.205<-23347 Statuses=0008 0009 06:39:53 Msec=5250 True Az=112.995 Ze=-170.205 Az status=0008 Ze status=0009 06:39:53 Check angles 06:39:53 SkyScan query 06:39:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:39:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:39:54 Message to Master queued w/err=0: serial=115157 error=0 06:39:59 Received message from Master: op=Filter serial=115158 06:39:59 Color wheel filter change from 0 to 0 06:39:59 FLIGetFilterPos err=0 currentPosition=0 06:39:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:39:59 Filter is already there-color wheel unchanged 06:39:59 Received message from Master: op=Shutter serial=115159 06:39:59 Shutter LASER open 06:39:59 Received message from Camera: op=State serial=115161 06:39:59 GetSingleValue result=40 Value=cccccccc 06:39:59 SkyScan query 06:40:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:40:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:00 Parameters OK 06:40:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:00 Set A/D data flow result=40 06:40:00 Set A/D channel type result=40 06:40:00 Set A/D encoding result=40 06:40:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:00 Set channel filter=0.000000e+000 result=40 06:40:00 Config A/D Result=40 06:40:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:00 Get A/D filter: -9.255963e+061 result=40 06:40:00 Get A/D value=-858993460 result=40 06:40:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:00 Parameters OK 06:40:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:00 Set A/D data flow result=40 06:40:00 Set A/D channel type result=40 06:40:00 Set A/D encoding result=40 06:40:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:00 Set channel filter=0.000000e+000 result=40 06:40:00 Config A/D Result=40 06:40:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:00 Get A/D filter: -9.255963e+061 result=40 06:40:00 Get A/D value=-858993460 result=40 06:40:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:40:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:40:00 Aux= 06:40:00 Message to Camera, serial 115161 queued 06:40:08 Received message from Master: op=Shutter serial=115171 06:40:08 Shutter LASER close 06:40:09 Received message from Master: op=PointingHead serial=115175 06:40:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:40:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:40:09 Point started: ret=0 06:40:09 point_skyscan result=0 06:40:10 Check angles 06:40:10 SkyScan query 06:40:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 06:40:11 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 06:40:11 Check angles 06:40:11 SkyScan query 06:40:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.49<-20166 Statuses=0008 0009 06:40:11 Msec=750 True Az=112.995 Ze=-122.49 Az status=0008 Ze status=0009 06:40:12 Check angles 06:40:12 SkyScan query 06:40:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.505<-18767 Statuses=0008 0009 06:40:12 Msec=1500 True Az=112.995 Ze=-101.505 Az status=0008 Ze status=0009 06:40:12 Check angles 06:40:12 SkyScan query 06:40:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.1<-17340 Statuses=0008 0009 06:40:13 Msec=2250 True Az=112.995 Ze=-80.1 Az status=0008 Ze status=0009 06:40:13 Check angles 06:40:13 SkyScan query 06:40:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.16<-15944 Statuses=0008 0009 06:40:14 Msec=3000 True Az=112.995 Ze=-59.16 Az status=0008 Ze status=0009 06:40:14 Check angles 06:40:14 SkyScan query 06:40:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.16<-14544 Statuses=0008 0009 06:40:14 Msec=3750 True Az=112.995 Ze=-38.16 Az status=0008 Ze status=0009 06:40:15 Check angles 06:40:15 SkyScan query 06:40:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.22<-13148 Statuses=0008 0009 06:40:15 Msec=4500 True Az=112.995 Ze=-17.22 Az status=0008 Ze status=0009 06:40:15 Check angles 06:40:15 SkyScan query 06:40:16 SkyScan query done: ret=0 az=112.995<-7533 ze=3.735<-11751 Statuses=0008 0009 06:40:16 Msec=5250 True Az=112.995 Ze=3.735 Az status=0008 Ze status=0009 06:40:16 Check angles 06:40:16 SkyScan query 06:40:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:40:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:40:17 Message to Master queued w/err=0: serial=115175 error=0 06:40:22 Received message from Master: op=Filter serial=115176 06:40:22 Color wheel filter change from 0 to 0 06:40:22 FLIGetFilterPos err=0 currentPosition=0 06:40:22 FLIGetStepsRemaining err=0 RemainingSteps=0 06:40:22 Filter is already there-color wheel unchanged 06:40:22 Received message from Master: op=Shutter serial=115177 06:40:22 Shutter LASER close 06:40:22 Received message from Camera: op=State serial=115179 06:40:22 GetSingleValue result=40 Value=cccccccc 06:40:22 SkyScan query 06:40:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:40:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:23 Parameters OK 06:40:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:23 Set A/D data flow result=40 06:40:23 Set A/D channel type result=40 06:40:23 Set A/D encoding result=40 06:40:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:23 Set channel filter=0.000000e+000 result=40 06:40:23 Config A/D Result=40 06:40:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:23 Get A/D filter: -9.255963e+061 result=40 06:40:23 Get A/D value=-858993460 result=40 06:40:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:23 Parameters OK 06:40:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:23 Set A/D data flow result=40 06:40:23 Set A/D channel type result=40 06:40:23 Set A/D encoding result=40 06:40:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:23 Set channel filter=0.000000e+000 result=40 06:40:23 Config A/D Result=40 06:40:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:23 Get A/D filter: -9.255963e+061 result=40 06:40:23 Get A/D value=-858993460 result=40 06:40:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:40:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:40:23 Aux= 06:40:23 Message to Camera, serial 115179 queued 06:41:00 Received message from Master: op=PointingHead serial=115192 06:41:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:41:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:41:00 Point started: ret=0 06:41:00 point_skyscan result=0 06:41:01 Check angles 06:41:01 SkyScan query 06:41:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:41:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:41:01 Message to Master queued w/err=0: serial=115192 error=0 06:41:06 Received message from Master: op=Filter serial=115193 06:41:06 Color wheel filter change from 0 to 0 06:41:06 FLIGetFilterPos err=0 currentPosition=0 06:41:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:06 Filter is already there-color wheel unchanged 06:41:06 Received message from Master: op=Shutter serial=115194 06:41:06 Shutter LASER close 06:41:06 Received message from Camera: op=State serial=115196 06:41:06 GetSingleValue result=40 Value=cccccccc 06:41:06 SkyScan query 06:41:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:41:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:07 Parameters OK 06:41:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:07 Set A/D data flow result=40 06:41:07 Set A/D channel type result=40 06:41:07 Set A/D encoding result=40 06:41:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:07 Set channel filter=0.000000e+000 result=40 06:41:07 Config A/D Result=40 06:41:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:07 Get A/D filter: -9.255963e+061 result=40 06:41:07 Get A/D value=-858993460 result=40 06:41:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:07 Parameters OK 06:41:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:07 Set A/D data flow result=40 06:41:07 Set A/D channel type result=40 06:41:07 Set A/D encoding result=40 06:41:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:07 Set channel filter=0.000000e+000 result=40 06:41:07 Config A/D Result=40 06:41:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:07 Get A/D filter: -9.255963e+061 result=40 06:41:07 Get A/D value=-858993460 result=40 06:41:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:07 Aux= 06:41:07 Message to Camera, serial 115196 queued 06:41:44 Received message from Master: op=PointingHead serial=115209 06:41:44 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:41:44 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:41:44 Point started: ret=0 06:41:44 point_skyscan result=0 06:41:45 Check angles 06:41:45 SkyScan query 06:41:45 SkyScan query done: ret=0 az=135.765<-9051 ze=-6.51<-12434 Statuses=0009 0008 06:41:45 Msec=0 True Az=135.765 Ze=-6.51 Az status=0009 Ze status=0008 06:41:46 Check angles 06:41:46 SkyScan query 06:41:46 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.495<-12433 Statuses=0009 0008 06:41:46 Msec=750 True Az=153.525 Ze=-6.495 Az status=0009 Ze status=0008 06:41:46 Check angles 06:41:46 SkyScan query 06:41:47 SkyScan query done: ret=0 az=171<-11400 ze=-6.495<-12433 Statuses=0009 0008 06:41:47 Msec=1500 True Az=171 Ze=-6.495 Az status=0009 Ze status=0008 06:41:47 Check angles 06:41:47 SkyScan query 06:41:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:41:48 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:41:48 Message to Master queued w/err=0: serial=115209 error=0 06:41:53 Received message from Master: op=Filter serial=115210 06:41:53 Color wheel filter change from 0 to 0 06:41:53 FLIGetFilterPos err=0 currentPosition=0 06:41:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:53 Filter is already there-color wheel unchanged 06:41:53 Received message from Master: op=Shutter serial=115211 06:41:53 Shutter LASER close 06:41:53 Received message from Camera: op=State serial=115213 06:41:53 GetSingleValue result=40 Value=cccccccc 06:41:53 SkyScan query 06:41:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:41:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:54 Parameters OK 06:41:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:54 Set A/D data flow result=40 06:41:54 Set A/D channel type result=40 06:41:54 Set A/D encoding result=40 06:41:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:54 Set channel filter=0.000000e+000 result=40 06:41:54 Config A/D Result=40 06:41:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:54 Get A/D filter: -9.255963e+061 result=40 06:41:54 Get A/D value=-858993460 result=40 06:41:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:54 Parameters OK 06:41:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:54 Set A/D data flow result=40 06:41:54 Set A/D channel type result=40 06:41:54 Set A/D encoding result=40 06:41:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:54 Set channel filter=0.000000e+000 result=40 06:41:54 Config A/D Result=40 06:41:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:54 Get A/D filter: -9.255963e+061 result=40 06:41:54 Get A/D value=-858993460 result=40 06:41:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:54 Aux= 06:41:54 Message to Camera, serial 115213 queued 06:42:30 Received message from Master: op=PointingHead serial=115226 06:42:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:42:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:42:31 Point started: ret=0 06:42:31 point_skyscan result=0 06:42:31 Check angles 06:42:31 SkyScan query 06:42:32 SkyScan query done: ret=0 az=153.015<-10201 ze=6.51<-11566 Statuses=0009 0008 06:42:32 Msec=0 True Az=153.015 Ze=6.51 Az status=0009 Ze status=0008 06:42:32 Check angles 06:42:32 SkyScan query 06:42:33 SkyScan query done: ret=0 az=135.525<-9035 ze=6.495<-11567 Statuses=0009 0008 06:42:33 Msec=750 True Az=135.525 Ze=6.495 Az status=0009 Ze status=0008 06:42:33 Check angles 06:42:33 SkyScan query 06:42:34 SkyScan query done: ret=0 az=118.095<-7873 ze=6.495<-11567 Statuses=0009 0008 06:42:34 Msec=1500 True Az=118.095 Ze=6.495 Az status=0009 Ze status=0008 06:42:34 Check angles 06:42:34 SkyScan query 06:42:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:42:34 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:42:34 Message to Master queued w/err=0: serial=115226 error=0 06:42:39 Received message from Master: op=Filter serial=115227 06:42:39 Color wheel filter change from 0 to 0 06:42:39 FLIGetFilterPos err=0 currentPosition=0 06:42:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:42:39 Filter is already there-color wheel unchanged 06:42:39 Received message from Master: op=Shutter serial=115228 06:42:39 Shutter LASER close 06:42:39 Received message from Camera: op=State serial=115230 06:42:39 GetSingleValue result=40 Value=cccccccc 06:42:39 SkyScan query 06:42:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:42:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:40 Parameters OK 06:42:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:40 Set A/D data flow result=40 06:42:40 Set A/D channel type result=40 06:42:40 Set A/D encoding result=40 06:42:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:40 Set channel filter=0.000000e+000 result=40 06:42:40 Config A/D Result=40 06:42:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:40 Get A/D filter: -9.255963e+061 result=40 06:42:40 Get A/D value=-858993460 result=40 06:42:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:40 Parameters OK 06:42:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:40 Set A/D data flow result=40 06:42:40 Set A/D channel type result=40 06:42:40 Set A/D encoding result=40 06:42:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:40 Set channel filter=0.000000e+000 result=40 06:42:40 Config A/D Result=40 06:42:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:40 Get A/D filter: -9.255963e+061 result=40 06:42:40 Get A/D value=-858993460 result=40 06:42:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:42:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:42:40 Aux= 06:42:40 Message to Camera, serial 115230 queued 06:43:17 Received message from Master: op=PointingHead serial=115243 06:43:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:43:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:43:17 Point started: ret=0 06:43:17 point_skyscan result=0 06:43:18 Check angles 06:43:18 SkyScan query 06:43:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 06:43:19 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 06:43:19 Check angles 06:43:19 SkyScan query 06:43:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.76<-14984 Statuses=0008 0009 06:43:19 Msec=750 True Az=112.995 Ze=-44.76 Az status=0008 Ze status=0009 06:43:20 Check angles 06:43:20 SkyScan query 06:43:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.715<-16381 Statuses=0008 0009 06:43:20 Msec=1500 True Az=112.995 Ze=-65.715 Az status=0008 Ze status=0009 06:43:20 Check angles 06:43:20 SkyScan query 06:43:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.655<-17777 Statuses=0008 0009 06:43:21 Msec=2250 True Az=112.995 Ze=-86.655 Az status=0008 Ze status=0009 06:43:21 Check angles 06:43:21 SkyScan query 06:43:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.09<-19206 Statuses=0008 0009 06:43:22 Msec=3000 True Az=112.995 Ze=-108.09 Az status=0008 Ze status=0009 06:43:22 Check angles 06:43:22 SkyScan query 06:43:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.03<-20602 Statuses=0008 0009 06:43:22 Msec=3750 True Az=112.995 Ze=-129.03 Az status=0008 Ze status=0009 06:43:23 Check angles 06:43:23 SkyScan query 06:43:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.435<-22029 Statuses=0008 0009 06:43:23 Msec=4500 True Az=112.995 Ze=-150.435 Az status=0008 Ze status=0009 06:43:23 Check angles 06:43:23 SkyScan query 06:43:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0008 0009 06:43:24 Msec=5250 True Az=112.995 Ze=-171.195 Az status=0008 Ze status=0009 06:43:24 Check angles 06:43:24 SkyScan query 06:43:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:43:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:43:25 Message to Master queued w/err=0: serial=115243 error=0 06:43:30 Received message from Master: op=Filter serial=115244 06:43:30 Color wheel filter change from 0 to 0 06:43:30 FLIGetFilterPos err=0 currentPosition=0 06:43:30 FLIGetStepsRemaining err=0 RemainingSteps=0 06:43:30 Filter is already there-color wheel unchanged 06:43:30 Received message from Master: op=Shutter serial=115245 06:43:30 Shutter LASER open 06:43:30 Received message from Camera: op=State serial=115247 06:43:30 GetSingleValue result=40 Value=cccccccc 06:43:30 SkyScan query 06:43:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:43:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:31 Parameters OK 06:43:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:31 Set A/D data flow result=40 06:43:31 Set A/D channel type result=40 06:43:31 Set A/D encoding result=40 06:43:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:31 Set channel filter=0.000000e+000 result=40 06:43:31 Config A/D Result=40 06:43:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:31 Get A/D filter: -9.255963e+061 result=40 06:43:31 Get A/D value=-858993460 result=40 06:43:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:31 Parameters OK 06:43:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:31 Set A/D data flow result=40 06:43:31 Set A/D channel type result=40 06:43:31 Set A/D encoding result=40 06:43:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:31 Set channel filter=0.000000e+000 result=40 06:43:31 Config A/D Result=40 06:43:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:31 Get A/D filter: -9.255963e+061 result=40 06:43:31 Get A/D value=-858993460 result=40 06:43:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:43:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:43:31 Aux= 06:43:31 Message to Camera, serial 115247 queued 06:43:39 Received message from Master: op=Shutter serial=115257 06:43:39 Shutter LASER close 06:43:39 Received message from Master: op=PointingHead serial=115261 06:43:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:43:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:43:40 Point started: ret=0 06:43:40 point_skyscan result=0 06:43:41 Check angles 06:43:41 SkyScan query 06:43:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.725<-21515 Statuses=0008 0009 06:43:41 Msec=0 True Az=112.995 Ze=-142.725 Az status=0008 Ze status=0009 06:43:41 Check angles 06:43:41 SkyScan query 06:43:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.725<-20115 Statuses=0008 0009 06:43:42 Msec=750 True Az=112.995 Ze=-121.725 Az status=0008 Ze status=0009 06:43:42 Check angles 06:43:42 SkyScan query 06:43:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.815<-18721 Statuses=0008 0009 06:43:43 Msec=1500 True Az=112.995 Ze=-100.815 Az status=0008 Ze status=0009 06:43:43 Check angles 06:43:43 SkyScan query 06:43:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.365<-17291 Statuses=0008 0009 06:43:43 Msec=2250 True Az=112.995 Ze=-79.365 Az status=0008 Ze status=0009 06:43:44 Check angles 06:43:44 SkyScan query 06:43:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.005<-15867 Statuses=0008 0009 06:43:44 Msec=3000 True Az=112.995 Ze=-58.005 Az status=0008 Ze status=0009 06:43:44 Check angles 06:43:44 SkyScan query 06:43:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.675<-14445 Statuses=0008 0009 06:43:45 Msec=3750 True Az=112.995 Ze=-36.675 Az status=0008 Ze status=0009 06:43:45 Check angles 06:43:45 SkyScan query 06:43:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.69<-13046 Statuses=0008 0009 06:43:46 Msec=4500 True Az=112.995 Ze=-15.69 Az status=0008 Ze status=0009 06:43:46 Check angles 06:43:46 SkyScan query 06:43:46 SkyScan query done: ret=0 az=112.995<-7533 ze=4.965<-11669 Statuses=0008 0009 06:43:46 Msec=5250 True Az=112.995 Ze=4.965 Az status=0008 Ze status=0009 06:43:47 Check angles 06:43:47 SkyScan query 06:43:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:43:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:43:47 Message to Master queued w/err=0: serial=115261 error=0 [UTC 2019-3-5 06:43:50] 06:43:52 Received message from Master: op=Filter serial=115262 06:43:52 Color wheel filter change from 0 to 0 06:43:52 FLIGetFilterPos err=0 currentPosition=0 06:43:52 FLIGetStepsRemaining err=0 RemainingSteps=0 06:43:52 Filter is already there-color wheel unchanged 06:43:52 Received message from Master: op=Shutter serial=115263 06:43:52 Shutter LASER close 06:43:52 Received message from Camera: op=State serial=115265 06:43:52 GetSingleValue result=40 Value=cccccccc 06:43:52 SkyScan query 06:43:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:43:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:53 Parameters OK 06:43:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:53 Set A/D data flow result=40 06:43:53 Set A/D channel type result=40 06:43:53 Set A/D encoding result=40 06:43:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:53 Set channel filter=0.000000e+000 result=40 06:43:53 Config A/D Result=40 06:43:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:53 Get A/D filter: -9.255963e+061 result=40 06:43:53 Get A/D value=-858993460 result=40 06:43:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:53 Parameters OK 06:43:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:53 Set A/D data flow result=40 06:43:53 Set A/D channel type result=40 06:43:53 Set A/D encoding result=40 06:43:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:53 Set channel filter=0.000000e+000 result=40 06:43:53 Config A/D Result=40 06:43:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:53 Get A/D filter: -9.255963e+061 result=40 06:43:53 Get A/D value=-858993460 result=40 06:43:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:43:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:43:53 Aux= 06:43:53 Message to Camera, serial 115265 queued 06:44:30 Received message from Master: op=PointingHead serial=115278 06:44:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:44:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:44:30 Point started: ret=0 06:44:30 point_skyscan result=0 06:44:31 Check angles 06:44:31 SkyScan query 06:44:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:44:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:44:32 Message to Master queued w/err=0: serial=115278 error=0 06:44:37 Received message from Master: op=Filter serial=115279 06:44:37 Color wheel filter change from 0 to 0 06:44:37 FLIGetFilterPos err=0 currentPosition=0 06:44:37 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:37 Filter is already there-color wheel unchanged 06:44:37 Received message from Master: op=Shutter serial=115280 06:44:37 Shutter LASER close 06:44:37 Received message from Camera: op=State serial=115282 06:44:37 GetSingleValue result=40 Value=cccccccc 06:44:37 SkyScan query 06:44:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:44:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:37 Parameters OK 06:44:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:37 Set A/D data flow result=40 06:44:37 Set A/D channel type result=40 06:44:37 Set A/D encoding result=40 06:44:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:37 Set channel filter=0.000000e+000 result=40 06:44:37 Config A/D Result=40 06:44:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:37 Get A/D filter: -9.255963e+061 result=40 06:44:37 Get A/D value=-858993460 result=40 06:44:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:37 Parameters OK 06:44:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:37 Set A/D data flow result=40 06:44:37 Set A/D channel type result=40 06:44:37 Set A/D encoding result=40 06:44:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:37 Set channel filter=0.000000e+000 result=40 06:44:37 Config A/D Result=40 06:44:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:37 Get A/D filter: -9.255963e+061 result=40 06:44:37 Get A/D value=-858993460 result=40 06:44:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:37 Aux= 06:44:37 Message to Camera, serial 115282 queued 06:45:14 Received message from Master: op=PointingHead serial=115295 06:45:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:45:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:45:15 Point started: ret=0 06:45:15 point_skyscan result=0 06:45:15 Check angles 06:45:15 SkyScan query 06:45:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:45:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:45:16 Message to Master queued w/err=0: serial=115295 error=0 06:45:21 Received message from Master: op=Filter serial=115296 06:45:21 Color wheel filter change from 0 to 0 06:45:21 FLIGetFilterPos err=0 currentPosition=0 06:45:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:45:21 Filter is already there-color wheel unchanged 06:45:21 Received message from Master: op=Shutter serial=115297 06:45:21 Shutter LASER close 06:45:21 Received message from Camera: op=State serial=115299 06:45:21 GetSingleValue result=40 Value=cccccccc 06:45:21 SkyScan query 06:45:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:45:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:22 Parameters OK 06:45:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:22 Set A/D data flow result=40 06:45:22 Set A/D channel type result=40 06:45:22 Set A/D encoding result=40 06:45:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:22 Set channel filter=0.000000e+000 result=40 06:45:22 Config A/D Result=40 06:45:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:22 Get A/D filter: -9.255963e+061 result=40 06:45:22 Get A/D value=-858993460 result=40 06:45:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:22 Parameters OK 06:45:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:22 Set A/D data flow result=40 06:45:22 Set A/D channel type result=40 06:45:22 Set A/D encoding result=40 06:45:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:22 Set channel filter=0.000000e+000 result=40 06:45:22 Config A/D Result=40 06:45:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:22 Get A/D filter: -9.255963e+061 result=40 06:45:22 Get A/D value=-858993460 result=40 06:45:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:45:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:45:22 Aux= 06:45:22 Message to Camera, serial 115299 queued 06:45:59 Received message from Master: op=PointingHead serial=115312 06:45:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:45:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:45:59 Point started: ret=0 06:45:59 point_skyscan result=0 06:46:00 Check angles 06:46:00 SkyScan query 06:46:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:46:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:46:00 Message to Master queued w/err=0: serial=115312 error=0 06:46:05 Received message from Master: op=Filter serial=115313 06:46:05 Color wheel filter change from 0 to 0 06:46:05 FLIGetFilterPos err=0 currentPosition=0 06:46:05 FLIGetStepsRemaining err=0 RemainingSteps=0 06:46:05 Filter is already there-color wheel unchanged 06:46:05 Received message from Master: op=Shutter serial=115314 06:46:05 Shutter LASER close 06:46:05 Received message from Camera: op=State serial=115316 06:46:05 GetSingleValue result=40 Value=cccccccc 06:46:05 SkyScan query 06:46:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:46:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:06 Parameters OK 06:46:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:06 Set A/D data flow result=40 06:46:06 Set A/D channel type result=40 06:46:06 Set A/D encoding result=40 06:46:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:06 Set channel filter=0.000000e+000 result=40 06:46:06 Config A/D Result=40 06:46:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:06 Get A/D filter: -9.255963e+061 result=40 06:46:06 Get A/D value=-858993460 result=40 06:46:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:06 Parameters OK 06:46:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:06 Set A/D data flow result=40 06:46:06 Set A/D channel type result=40 06:46:06 Set A/D encoding result=40 06:46:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:06 Set channel filter=0.000000e+000 result=40 06:46:06 Config A/D Result=40 06:46:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:06 Get A/D filter: -9.255963e+061 result=40 06:46:06 Get A/D value=-858993460 result=40 06:46:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:06 Aux= 06:46:06 Message to Camera, serial 115316 queued 06:46:43 Received message from Master: op=PointingHead serial=115329 06:46:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:46:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:46:43 Point started: ret=0 06:46:43 point_skyscan result=0 06:46:44 Check angles 06:46:44 SkyScan query 06:46:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 06:46:45 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 06:46:45 Check angles 06:46:45 SkyScan query 06:46:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.25<-14950 Statuses=0008 0009 06:46:45 Msec=750 True Az=112.995 Ze=-44.25 Az status=0008 Ze status=0009 06:46:45 Check angles 06:46:45 SkyScan query 06:46:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.19<-16346 Statuses=0008 0009 06:46:46 Msec=1500 True Az=112.995 Ze=-65.19 Az status=0008 Ze status=0009 06:46:46 Check angles 06:46:46 SkyScan query 06:46:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.13<-17742 Statuses=0008 0009 06:46:47 Msec=2250 True Az=112.995 Ze=-86.13 Az status=0008 Ze status=0009 06:46:47 Check angles 06:46:47 SkyScan query 06:46:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.085<-19139 Statuses=0008 0009 06:46:48 Msec=3000 True Az=112.995 Ze=-107.085 Az status=0008 Ze status=0009 06:46:48 Check angles 06:46:48 SkyScan query 06:46:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.025<-20535 Statuses=0008 0009 06:46:48 Msec=3750 True Az=112.995 Ze=-128.025 Az status=0008 Ze status=0009 06:46:48 Check angles 06:46:48 SkyScan query 06:46:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.98<-21932 Statuses=0008 0009 06:46:49 Msec=4500 True Az=112.995 Ze=-148.98 Az status=0008 Ze status=0009 06:46:49 Check angles 06:46:49 SkyScan query 06:46:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.935<-23329 Statuses=0008 0009 06:46:50 Msec=5250 True Az=112.995 Ze=-169.935 Az status=0008 Ze status=0009 06:46:50 Check angles 06:46:50 SkyScan query 06:46:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:46:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:46:51 Message to Master queued w/err=0: serial=115329 error=0 06:46:56 Received message from Master: op=Filter serial=115330 06:46:56 Color wheel filter change from 0 to 0 06:46:56 FLIGetFilterPos err=0 currentPosition=0 06:46:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:46:56 Filter is already there-color wheel unchanged 06:46:56 Received message from Master: op=Shutter serial=115331 06:46:56 Shutter LASER open 06:46:56 Received message from Camera: op=State serial=115333 06:46:56 GetSingleValue result=40 Value=cccccccc 06:46:56 SkyScan query 06:46:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:46:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:56 Parameters OK 06:46:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:56 Set A/D data flow result=40 06:46:56 Set A/D channel type result=40 06:46:56 Set A/D encoding result=40 06:46:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:56 Set channel filter=0.000000e+000 result=40 06:46:56 Config A/D Result=40 06:46:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:56 Get A/D filter: -9.255963e+061 result=40 06:46:56 Get A/D value=-858993460 result=40 06:46:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:56 Parameters OK 06:46:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:56 Set A/D data flow result=40 06:46:56 Set A/D channel type result=40 06:46:56 Set A/D encoding result=40 06:46:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:56 Set channel filter=0.000000e+000 result=40 06:46:56 Config A/D Result=40 06:46:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:56 Get A/D filter: -9.255963e+061 result=40 06:46:56 Get A/D value=-858993460 result=40 06:46:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:56 Aux= 06:46:56 Message to Camera, serial 115333 queued 06:47:05 Received message from Master: op=Shutter serial=115343 06:47:05 Shutter LASER close 06:47:06 Received message from Master: op=PointingHead serial=115347 06:47:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:47:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:47:06 Point started: ret=0 06:47:06 point_skyscan result=0 06:47:07 Check angles 06:47:07 SkyScan query 06:47:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.295<-21553 Statuses=0008 0009 06:47:07 Msec=0 True Az=112.995 Ze=-143.295 Az status=0008 Ze status=0009 06:47:07 Check angles 06:47:07 SkyScan query 06:47:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.355<-20157 Statuses=0008 0009 06:47:08 Msec=750 True Az=112.995 Ze=-122.355 Az status=0008 Ze status=0009 06:47:08 Check angles 06:47:08 SkyScan query 06:47:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.385<-18759 Statuses=0008 0009 06:47:09 Msec=1500 True Az=112.995 Ze=-101.385 Az status=0008 Ze status=0009 06:47:09 Check angles 06:47:09 SkyScan query 06:47:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.43<-17362 Statuses=0008 0009 06:47:09 Msec=2250 True Az=112.995 Ze=-80.43 Az status=0008 Ze status=0009 06:47:10 Check angles 06:47:10 SkyScan query 06:47:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.49<-15966 Statuses=0008 0009 06:47:10 Msec=3000 True Az=112.995 Ze=-59.49 Az status=0008 Ze status=0009 06:47:10 Check angles 06:47:10 SkyScan query 06:47:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.505<-14567 Statuses=0008 0009 06:47:11 Msec=3750 True Az=112.995 Ze=-38.505 Az status=0008 Ze status=0009 06:47:11 Check angles 06:47:11 SkyScan query 06:47:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.55<-13170 Statuses=0008 0009 06:47:12 Msec=4500 True Az=112.995 Ze=-17.55 Az status=0008 Ze status=0009 06:47:12 Check angles 06:47:12 SkyScan query 06:47:12 SkyScan query done: ret=0 az=112.98<-7532 ze=3.39<-11774 Statuses=0008 0009 06:47:12 Msec=5250 True Az=112.98 Ze=3.39 Az status=0008 Ze status=0009 06:47:13 Check angles 06:47:13 SkyScan query 06:47:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:47:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:47:13 Message to Master queued w/err=0: serial=115347 error=0 06:47:18 Received message from Master: op=Filter serial=115348 06:47:18 Color wheel filter change from 0 to 0 06:47:18 FLIGetFilterPos err=0 currentPosition=0 06:47:18 FLIGetStepsRemaining err=0 RemainingSteps=0 06:47:18 Filter is already there-color wheel unchanged 06:47:18 Received message from Master: op=Shutter serial=115349 06:47:18 Shutter LASER close 06:47:19 Received message from Camera: op=State serial=115351 06:47:19 GetSingleValue result=40 Value=cccccccc 06:47:19 SkyScan query 06:47:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:47:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:19 Parameters OK 06:47:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:19 Set A/D data flow result=40 06:47:19 Set A/D channel type result=40 06:47:19 Set A/D encoding result=40 06:47:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:19 Set channel filter=0.000000e+000 result=40 06:47:19 Config A/D Result=40 06:47:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:19 Get A/D filter: -9.255963e+061 result=40 06:47:19 Get A/D value=-858993460 result=40 06:47:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:19 Parameters OK 06:47:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:19 Set A/D data flow result=40 06:47:19 Set A/D channel type result=40 06:47:19 Set A/D encoding result=40 06:47:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:19 Set channel filter=0.000000e+000 result=40 06:47:19 Config A/D Result=40 06:47:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:19 Get A/D filter: -9.255963e+061 result=40 06:47:19 Get A/D value=-858993460 result=40 06:47:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:47:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:47:19 Aux= 06:47:19 Message to Camera, serial 115351 queued 06:47:56 Received message from Master: op=PointingHead serial=115364 06:47:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:47:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:47:56 Point started: ret=0 06:47:56 point_skyscan result=0 06:47:57 Check angles 06:47:57 SkyScan query 06:47:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:47:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:47:58 Message to Master queued w/err=0: serial=115364 error=0 06:48:03 Received message from Master: op=Filter serial=115365 06:48:03 Color wheel filter change from 0 to 0 06:48:03 FLIGetFilterPos err=0 currentPosition=0 06:48:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:03 Filter is already there-color wheel unchanged 06:48:03 Received message from Master: op=Shutter serial=115366 06:48:03 Shutter LASER close 06:48:03 Received message from Camera: op=State serial=115368 06:48:03 GetSingleValue result=40 Value=cccccccc 06:48:03 SkyScan query 06:48:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:48:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:03 Parameters OK 06:48:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:03 Set A/D data flow result=40 06:48:03 Set A/D channel type result=40 06:48:03 Set A/D encoding result=40 06:48:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:03 Set channel filter=0.000000e+000 result=40 06:48:03 Config A/D Result=40 06:48:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:03 Get A/D filter: -9.255963e+061 result=40 06:48:03 Get A/D value=-858993460 result=40 06:48:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:03 Parameters OK 06:48:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:03 Set A/D data flow result=40 06:48:03 Set A/D channel type result=40 06:48:03 Set A/D encoding result=40 06:48:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:03 Set channel filter=0.000000e+000 result=40 06:48:03 Config A/D Result=40 06:48:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:03 Get A/D filter: -9.255963e+061 result=40 06:48:03 Get A/D value=-858993460 result=40 06:48:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:03 Aux= 06:48:03 Message to Camera, serial 115368 queued 06:48:40 Received message from Master: op=PointingHead serial=115381 06:48:40 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:48:40 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:48:41 Point started: ret=0 06:48:41 point_skyscan result=0 06:48:41 Check angles 06:48:41 SkyScan query 06:48:42 SkyScan query done: ret=0 az=135.765<-9051 ze=-6.51<-12434 Statuses=0009 0008 06:48:42 Msec=0 True Az=135.765 Ze=-6.51 Az status=0009 Ze status=0008 06:48:42 Check angles 06:48:42 SkyScan query 06:48:43 SkyScan query done: ret=0 az=153.285<-10219 ze=-6.495<-12433 Statuses=0009 0008 06:48:43 Msec=750 True Az=153.285 Ze=-6.495 Az status=0009 Ze status=0008 06:48:43 Check angles 06:48:43 SkyScan query 06:48:43 SkyScan query done: ret=0 az=170.73<-11382 ze=-6.495<-12433 Statuses=0009 0008 06:48:43 Msec=1500 True Az=170.73 Ze=-6.495 Az status=0009 Ze status=0008 06:48:44 Check angles 06:48:44 SkyScan query 06:48:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:48:44 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:48:44 Message to Master queued w/err=0: serial=115381 error=0 06:48:49 Received message from Master: op=Filter serial=115382 06:48:49 Color wheel filter change from 0 to 0 06:48:49 FLIGetFilterPos err=0 currentPosition=0 06:48:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:49 Filter is already there-color wheel unchanged 06:48:49 Received message from Master: op=Shutter serial=115383 06:48:49 Shutter LASER close 06:48:49 Received message from Camera: op=State serial=115385 06:48:49 GetSingleValue result=40 Value=cccccccc 06:48:49 SkyScan query 06:48:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:48:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:50 Parameters OK 06:48:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:50 Set A/D data flow result=40 06:48:50 Set A/D channel type result=40 06:48:50 Set A/D encoding result=40 06:48:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:50 Set channel filter=0.000000e+000 result=40 06:48:50 Config A/D Result=40 06:48:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:50 Get A/D filter: -9.255963e+061 result=40 06:48:50 Get A/D value=-858993460 result=40 06:48:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:50 Parameters OK 06:48:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:50 Set A/D data flow result=40 06:48:50 Set A/D channel type result=40 06:48:50 Set A/D encoding result=40 06:48:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:50 Set channel filter=0.000000e+000 result=40 06:48:50 Config A/D Result=40 06:48:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:50 Get A/D filter: -9.255963e+061 result=40 06:48:50 Get A/D value=-858993460 result=40 06:48:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:50 Aux= 06:48:50 Message to Camera, serial 115385 queued 06:49:27 Received message from Master: op=PointingHead serial=115398 06:49:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:49:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:49:27 Point started: ret=0 06:49:27 point_skyscan result=0 06:49:28 Check angles 06:49:28 SkyScan query 06:49:29 SkyScan query done: ret=0 az=153<-10200 ze=6.51<-11566 Statuses=0009 0008 06:49:29 Msec=0 True Az=153 Ze=6.51 Az status=0009 Ze status=0008 06:49:29 Check angles 06:49:29 SkyScan query 06:49:29 SkyScan query done: ret=0 az=135.075<-9005 ze=6.495<-11567 Statuses=0009 0008 06:49:29 Msec=750 True Az=135.075 Ze=6.495 Az status=0009 Ze status=0008 06:49:29 Check angles 06:49:29 SkyScan query 06:49:30 SkyScan query done: ret=0 az=117.63<-7842 ze=6.495<-11567 Statuses=0009 0008 06:49:30 Msec=1500 True Az=117.63 Ze=6.495 Az status=0009 Ze status=0008 06:49:30 Check angles 06:49:30 SkyScan query 06:49:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:49:31 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:49:31 Message to Master queued w/err=0: serial=115398 error=0 06:49:36 Received message from Master: op=Filter serial=115399 06:49:36 Color wheel filter change from 0 to 0 06:49:36 FLIGetFilterPos err=0 currentPosition=0 06:49:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:49:36 Filter is already there-color wheel unchanged 06:49:36 Received message from Master: op=Shutter serial=115400 06:49:36 Shutter LASER close 06:49:36 Received message from Camera: op=State serial=115402 06:49:36 GetSingleValue result=40 Value=cccccccc 06:49:36 SkyScan query 06:49:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:49:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:37 Parameters OK 06:49:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:37 Set A/D data flow result=40 06:49:37 Set A/D channel type result=40 06:49:37 Set A/D encoding result=40 06:49:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:37 Set channel filter=0.000000e+000 result=40 06:49:37 Config A/D Result=40 06:49:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:37 Get A/D filter: -9.255963e+061 result=40 06:49:37 Get A/D value=-858993460 result=40 06:49:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:37 Parameters OK 06:49:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:37 Set A/D data flow result=40 06:49:37 Set A/D channel type result=40 06:49:37 Set A/D encoding result=40 06:49:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:37 Set channel filter=0.000000e+000 result=40 06:49:37 Config A/D Result=40 06:49:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:37 Get A/D filter: -9.255963e+061 result=40 06:49:37 Get A/D value=-858993460 result=40 06:49:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:49:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:49:37 Aux= 06:49:37 Message to Camera, serial 115402 queued 06:50:13 Received message from Master: op=PointingHead serial=115415 06:50:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:50:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:50:14 Point started: ret=0 06:50:14 point_skyscan result=0 06:50:15 Check angles 06:50:15 SkyScan query 06:50:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 06:50:15 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 06:50:15 Check angles 06:50:15 SkyScan query 06:50:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.67<-14978 Statuses=0008 0009 06:50:16 Msec=750 True Az=112.995 Ze=-44.67 Az status=0008 Ze status=0009 06:50:16 Check angles 06:50:16 SkyScan query 06:50:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.045<-16403 Statuses=0008 0009 06:50:17 Msec=1500 True Az=112.995 Ze=-66.045 Az status=0008 Ze status=0009 06:50:17 Check angles 06:50:17 SkyScan query 06:50:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-87<-17800 Statuses=0008 0009 06:50:17 Msec=2250 True Az=112.995 Ze=-87 Az status=0008 Ze status=0009 06:50:18 Check angles 06:50:18 SkyScan query 06:50:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.97<-19198 Statuses=0008 0009 06:50:18 Msec=3000 True Az=112.995 Ze=-107.97 Az status=0008 Ze status=0009 06:50:18 Check angles 06:50:18 SkyScan query 06:50:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.91<-20594 Statuses=0008 0009 06:50:19 Msec=3750 True Az=112.995 Ze=-128.91 Az status=0008 Ze status=0009 06:50:19 Check angles 06:50:19 SkyScan query 06:50:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.895<-21993 Statuses=0008 0009 06:50:20 Msec=4500 True Az=112.995 Ze=-149.895 Az status=0008 Ze status=0009 06:50:20 Check angles 06:50:20 SkyScan query 06:50:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.775<-23385 Statuses=0008 0009 06:50:20 Msec=5250 True Az=112.995 Ze=-170.775 Az status=0008 Ze status=0009 06:50:21 Check angles 06:50:21 SkyScan query 06:50:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:50:21 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:50:21 Message to Master queued w/err=0: serial=115415 error=0 06:50:26 Received message from Master: op=Filter serial=115416 06:50:26 Color wheel filter change from 0 to 0 06:50:26 FLIGetFilterPos err=0 currentPosition=0 06:50:26 FLIGetStepsRemaining err=0 RemainingSteps=0 06:50:26 Filter is already there-color wheel unchanged 06:50:26 Received message from Master: op=Shutter serial=115417 06:50:26 Shutter LASER open 06:50:27 Received message from Camera: op=State serial=115419 06:50:27 GetSingleValue result=40 Value=cccccccc 06:50:27 SkyScan query 06:50:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:50:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:27 Parameters OK 06:50:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:27 Set A/D data flow result=40 06:50:27 Set A/D channel type result=40 06:50:27 Set A/D encoding result=40 06:50:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:27 Set channel filter=0.000000e+000 result=40 06:50:27 Config A/D Result=40 06:50:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:27 Get A/D filter: -9.255963e+061 result=40 06:50:27 Get A/D value=-858993460 result=40 06:50:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:27 Parameters OK 06:50:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:27 Set A/D data flow result=40 06:50:27 Set A/D channel type result=40 06:50:27 Set A/D encoding result=40 06:50:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:27 Set channel filter=0.000000e+000 result=40 06:50:27 Config A/D Result=40 06:50:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:27 Get A/D filter: -9.255963e+061 result=40 06:50:27 Get A/D value=-858993460 result=40 06:50:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:50:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:50:27 Aux= 06:50:27 Message to Camera, serial 115419 queued 06:50:36 Received message from Master: op=Shutter serial=115429 06:50:36 Shutter LASER close 06:50:36 Received message from Master: op=PointingHead serial=115433 06:50:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:50:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:50:36 Point started: ret=0 06:50:36 point_skyscan result=0 06:50:37 Check angles 06:50:37 SkyScan query 06:50:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 06:50:38 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 06:50:38 Check angles 06:50:38 SkyScan query 06:50:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.965<-20131 Statuses=0008 0009 06:50:38 Msec=750 True Az=112.995 Ze=-121.965 Az status=0008 Ze status=0009 06:50:39 Check angles 06:50:39 SkyScan query 06:50:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.04<-18736 Statuses=0008 0009 06:50:39 Msec=1500 True Az=112.995 Ze=-101.04 Az status=0008 Ze status=0009 06:50:39 Check angles 06:50:39 SkyScan query 06:50:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.07<-17338 Statuses=0008 0009 06:50:40 Msec=2250 True Az=112.995 Ze=-80.07 Az status=0008 Ze status=0009 06:50:40 Check angles 06:50:40 SkyScan query 06:50:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 06:50:41 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 06:50:41 Check angles 06:50:41 SkyScan query 06:50:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.13<-14542 Statuses=0008 0009 06:50:41 Msec=3750 True Az=112.995 Ze=-38.13 Az status=0008 Ze status=0009 06:50:42 Check angles 06:50:42 SkyScan query 06:50:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.19<-13146 Statuses=0008 0009 06:50:42 Msec=4500 True Az=112.995 Ze=-17.19 Az status=0008 Ze status=0009 06:50:42 Check angles 06:50:42 SkyScan query 06:50:43 SkyScan query done: ret=0 az=112.995<-7533 ze=3.765<-11749 Statuses=0008 0009 06:50:43 Msec=5250 True Az=112.995 Ze=3.765 Az status=0008 Ze status=0009 06:50:43 Check angles 06:50:43 SkyScan query 06:50:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:50:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:50:44 Message to Master queued w/err=0: serial=115433 error=0 06:50:49 Received message from Master: op=Filter serial=115434 06:50:49 Color wheel filter change from 0 to 0 06:50:49 FLIGetFilterPos err=0 currentPosition=0 06:50:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:50:49 Filter is already there-color wheel unchanged 06:50:49 Received message from Master: op=Shutter serial=115435 06:50:49 Shutter LASER close 06:50:49 Received message from Camera: op=State serial=115437 06:50:49 GetSingleValue result=40 Value=cccccccc 06:50:49 SkyScan query 06:50:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:50:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:50 Parameters OK 06:50:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:50 Set A/D data flow result=40 06:50:50 Set A/D channel type result=40 06:50:50 Set A/D encoding result=40 06:50:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:50 Set channel filter=0.000000e+000 result=40 06:50:50 Config A/D Result=40 06:50:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:50 Get A/D filter: -9.255963e+061 result=40 06:50:50 Get A/D value=-858993460 result=40 06:50:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:50 Parameters OK 06:50:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:50 Set A/D data flow result=40 06:50:50 Set A/D channel type result=40 06:50:50 Set A/D encoding result=40 06:50:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:50 Set channel filter=0.000000e+000 result=40 06:50:50 Config A/D Result=40 06:50:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:50 Get A/D filter: -9.255963e+061 result=40 06:50:50 Get A/D value=-858993460 result=40 06:50:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:50:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:50:50 Aux= 06:50:50 Message to Camera, serial 115437 queued 06:51:26 Received message from Master: op=PointingHead serial=115450 06:51:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:51:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:51:27 Point started: ret=0 06:51:27 point_skyscan result=0 06:51:28 Check angles 06:51:28 SkyScan query 06:51:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:51:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:51:28 Message to Master queued w/err=0: serial=115450 error=0 06:51:33 Received message from Master: op=Filter serial=115451 06:51:33 Color wheel filter change from 0 to 0 06:51:33 FLIGetFilterPos err=0 currentPosition=0 06:51:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:33 Filter is already there-color wheel unchanged 06:51:33 Received message from Master: op=Shutter serial=115452 06:51:33 Shutter LASER close 06:51:33 Received message from Camera: op=State serial=115454 06:51:33 GetSingleValue result=40 Value=cccccccc 06:51:33 SkyScan query 06:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:51:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:34 Parameters OK 06:51:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:34 Set A/D data flow result=40 06:51:34 Set A/D channel type result=40 06:51:34 Set A/D encoding result=40 06:51:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:34 Set channel filter=0.000000e+000 result=40 06:51:34 Config A/D Result=40 06:51:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:34 Get A/D filter: -9.255963e+061 result=40 06:51:34 Get A/D value=-858993460 result=40 06:51:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:34 Parameters OK 06:51:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:34 Set A/D data flow result=40 06:51:34 Set A/D channel type result=40 06:51:34 Set A/D encoding result=40 06:51:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:34 Set channel filter=0.000000e+000 result=40 06:51:34 Config A/D Result=40 06:51:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:34 Get A/D filter: -9.255963e+061 result=40 06:51:34 Get A/D value=-858993460 result=40 06:51:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:51:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:51:34 Aux= 06:51:34 Message to Camera, serial 115454 queued 06:52:11 Received message from Master: op=PointingHead serial=115467 06:52:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:52:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:52:11 Point started: ret=0 06:52:11 point_skyscan result=0 06:52:12 Check angles 06:52:12 SkyScan query 06:52:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:52:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:52:12 Message to Master queued w/err=0: serial=115467 error=0 06:52:17 Received message from Master: op=Filter serial=115468 06:52:17 Color wheel filter change from 0 to 0 06:52:17 FLIGetFilterPos err=0 currentPosition=0 06:52:17 FLIGetStepsRemaining err=0 RemainingSteps=0 06:52:17 Filter is already there-color wheel unchanged 06:52:18 Received message from Master: op=Shutter serial=115469 06:52:18 Shutter LASER close 06:52:18 Received message from Camera: op=State serial=115471 06:52:18 GetSingleValue result=40 Value=cccccccc 06:52:18 SkyScan query 06:52:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:52:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:18 Parameters OK 06:52:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:18 Set A/D data flow result=40 06:52:18 Set A/D channel type result=40 06:52:18 Set A/D encoding result=40 06:52:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:18 Set channel filter=0.000000e+000 result=40 06:52:18 Config A/D Result=40 06:52:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:18 Get A/D filter: -9.255963e+061 result=40 06:52:18 Get A/D value=-858993460 result=40 06:52:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:18 Parameters OK 06:52:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:18 Set A/D data flow result=40 06:52:18 Set A/D channel type result=40 06:52:18 Set A/D encoding result=40 06:52:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:18 Set channel filter=0.000000e+000 result=40 06:52:18 Config A/D Result=40 06:52:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:18 Get A/D filter: -9.255963e+061 result=40 06:52:18 Get A/D value=-858993460 result=40 06:52:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:52:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:52:18 Aux= 06:52:18 Message to Camera, serial 115471 queued 06:52:55 Received message from Master: op=PointingHead serial=115484 06:52:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:52:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:52:55 Point started: ret=0 06:52:55 point_skyscan result=0 06:52:56 Check angles 06:52:56 SkyScan query 06:52:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:52:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:52:57 Message to Master queued w/err=0: serial=115484 error=0 06:53:02 Received message from Master: op=Filter serial=115485 06:53:02 Color wheel filter change from 0 to 0 06:53:02 FLIGetFilterPos err=0 currentPosition=0 06:53:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:02 Filter is already there-color wheel unchanged 06:53:02 Received message from Master: op=Shutter serial=115486 06:53:02 Shutter LASER close 06:53:02 Received message from Camera: op=State serial=115488 06:53:02 GetSingleValue result=40 Value=cccccccc 06:53:02 SkyScan query 06:53:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:53:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:02 Parameters OK 06:53:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:02 Set A/D data flow result=40 06:53:02 Set A/D channel type result=40 06:53:02 Set A/D encoding result=40 06:53:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:02 Set channel filter=0.000000e+000 result=40 06:53:02 Config A/D Result=40 06:53:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:02 Get A/D filter: -9.255963e+061 result=40 06:53:02 Get A/D value=-858993460 result=40 06:53:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:02 Parameters OK 06:53:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:02 Set A/D data flow result=40 06:53:02 Set A/D channel type result=40 06:53:02 Set A/D encoding result=40 06:53:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:02 Set channel filter=0.000000e+000 result=40 06:53:02 Config A/D Result=40 06:53:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:02 Get A/D filter: -9.255963e+061 result=40 06:53:02 Get A/D value=-858993460 result=40 06:53:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:02 Aux= 06:53:02 Message to Camera, serial 115488 queued 06:53:39 Received message from Master: op=PointingHead serial=115501 06:53:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:53:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:53:40 Point started: ret=0 06:53:40 point_skyscan result=0 06:53:40 Check angles 06:53:40 SkyScan query 06:53:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.715<-13581 Statuses=0008 0009 06:53:41 Msec=0 True Az=112.995 Ze=-23.715 Az status=0008 Ze status=0009 06:53:41 Check angles 06:53:41 SkyScan query 06:53:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.67<-14978 Statuses=0008 0009 06:53:42 Msec=750 True Az=112.995 Ze=-44.67 Az status=0008 Ze status=0009 06:53:42 Check angles 06:53:42 SkyScan query 06:53:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.06<-16404 Statuses=0008 0009 06:53:42 Msec=1500 True Az=112.995 Ze=-66.06 Az status=0008 Ze status=0009 06:53:43 Check angles 06:53:43 SkyScan query 06:53:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.03<-17802 Statuses=0008 0009 06:53:43 Msec=2250 True Az=112.995 Ze=-87.03 Az status=0008 Ze status=0009 06:53:43 Check angles 06:53:43 SkyScan query 06:53:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.955<-19197 Statuses=0008 0009 06:53:44 Msec=3000 True Az=112.995 Ze=-107.955 Az status=0008 Ze status=0009 06:53:44 Check angles 06:53:44 SkyScan query 06:53:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.925<-20595 Statuses=0008 0009 06:53:45 Msec=3750 True Az=112.995 Ze=-128.925 Az status=0008 Ze status=0009 06:53:45 Check angles 06:53:45 SkyScan query 06:53:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.345<-22023 Statuses=0008 0009 06:53:46 Msec=4500 True Az=112.995 Ze=-150.345 Az status=0008 Ze status=0009 06:53:46 Check angles 06:53:46 SkyScan query 06:53:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.12<-23408 Statuses=0008 0009 06:53:46 Msec=5250 True Az=112.995 Ze=-171.12 Az status=0008 Ze status=0009 06:53:46 Check angles 06:53:46 SkyScan query 06:53:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:53:47 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:53:47 Message to Master queued w/err=0: serial=115501 error=0 06:53:52 Received message from Master: op=Filter serial=115502 06:53:52 Color wheel filter change from 0 to 0 06:53:52 FLIGetFilterPos err=0 currentPosition=0 06:53:52 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:52 Filter is already there-color wheel unchanged 06:53:52 Received message from Master: op=Shutter serial=115503 06:53:52 Shutter LASER open 06:53:52 Received message from Camera: op=State serial=115505 06:53:52 GetSingleValue result=40 Value=cccccccc 06:53:52 SkyScan query 06:53:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:53:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:53 Parameters OK 06:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:53 Set A/D data flow result=40 06:53:53 Set A/D channel type result=40 06:53:53 Set A/D encoding result=40 06:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:53 Set channel filter=0.000000e+000 result=40 06:53:53 Config A/D Result=40 06:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:53 Get A/D filter: -9.255963e+061 result=40 06:53:53 Get A/D value=-858993460 result=40 06:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:53 Parameters OK 06:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:53 Set A/D data flow result=40 06:53:53 Set A/D channel type result=40 06:53:53 Set A/D encoding result=40 06:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:53 Set channel filter=0.000000e+000 result=40 06:53:53 Config A/D Result=40 06:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:53 Get A/D filter: -9.255963e+061 result=40 06:53:53 Get A/D value=-858993460 result=40 06:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:53 Aux= 06:53:53 Message to Camera, serial 115505 queued 06:54:01 Received message from Master: op=Shutter serial=115515 06:54:01 Shutter LASER close 06:54:02 Received message from Master: op=PointingHead serial=115519 06:54:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:54:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:54:02 Point started: ret=0 06:54:02 point_skyscan result=0 06:54:03 Check angles 06:54:03 SkyScan query 06:54:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.92<-21528 Statuses=0008 0009 06:54:04 Msec=0 True Az=112.995 Ze=-142.92 Az status=0008 Ze status=0009 06:54:04 Check angles 06:54:04 SkyScan query 06:54:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.485<-20099 Statuses=0008 0009 06:54:04 Msec=750 True Az=112.995 Ze=-121.485 Az status=0008 Ze status=0009 06:54:05 Check angles 06:54:05 SkyScan query 06:54:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.56<-18704 Statuses=0008 0009 06:54:05 Msec=1500 True Az=112.995 Ze=-100.56 Az status=0008 Ze status=0009 06:54:05 Check angles 06:54:05 SkyScan query 06:54:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.575<-17305 Statuses=0008 0009 06:54:06 Msec=2250 True Az=112.995 Ze=-79.575 Az status=0008 Ze status=0009 06:54:06 Check angles 06:54:06 SkyScan query 06:54:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.65<-15910 Statuses=0008 0009 06:54:07 Msec=3000 True Az=112.995 Ze=-58.65 Az status=0008 Ze status=0009 06:54:07 Check angles 06:54:07 SkyScan query 06:54:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.275<-14485 Statuses=0008 0009 06:54:07 Msec=3750 True Az=112.995 Ze=-37.275 Az status=0008 Ze status=0009 06:54:08 Check angles 06:54:08 SkyScan query 06:54:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.305<-13087 Statuses=0008 0009 06:54:08 Msec=4500 True Az=112.995 Ze=-16.305 Az status=0008 Ze status=0009 06:54:08 Check angles 06:54:08 SkyScan query 06:54:09 SkyScan query done: ret=0 az=112.995<-7533 ze=4.53<-11698 Statuses=0008 0009 06:54:09 Msec=5250 True Az=112.995 Ze=4.53 Az status=0008 Ze status=0009 06:54:09 Check angles 06:54:09 SkyScan query 06:54:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:54:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:54:10 Message to Master queued w/err=0: serial=115519 error=0 06:54:15 Received message from Master: op=Filter serial=115520 06:54:15 Color wheel filter change from 0 to 0 06:54:15 FLIGetFilterPos err=0 currentPosition=0 06:54:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:54:15 Filter is already there-color wheel unchanged 06:54:15 Received message from Master: op=Shutter serial=115521 06:54:15 Shutter LASER close 06:54:15 Received message from Camera: op=State serial=115523 06:54:15 GetSingleValue result=40 Value=cccccccc 06:54:15 SkyScan query 06:54:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:54:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 [UTC 2019-3-5 06:54:16] 06:54:16 Parameters OK 06:54:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:16 Set A/D data flow result=40 06:54:16 Set A/D channel type result=40 06:54:16 Set A/D encoding result=40 06:54:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:16 Set channel filter=0.000000e+000 result=40 06:54:16 Config A/D Result=40 06:54:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:16 Get A/D filter: -9.255963e+061 result=40 06:54:16 Get A/D value=-858993460 result=40 06:54:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:16 Parameters OK 06:54:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:16 Set A/D data flow result=40 06:54:16 Set A/D channel type result=40 06:54:16 Set A/D encoding result=40 06:54:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:16 Set channel filter=0.000000e+000 result=40 06:54:16 Config A/D Result=40 06:54:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:16 Get A/D filter: -9.255963e+061 result=40 06:54:16 Get A/D value=-858993460 result=40 06:54:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:54:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:54:16 Aux= 06:54:16 Message to Camera, serial 115523 queued 06:54:52 Received message from Master: op=PointingHead serial=115536 06:54:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:54:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:54:53 Point started: ret=0 06:54:53 point_skyscan result=0 06:54:54 Check angles 06:54:54 SkyScan query 06:54:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:54:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:54:54 Message to Master queued w/err=0: serial=115536 error=0 06:54:59 Received message from Master: op=Filter serial=115537 06:54:59 Color wheel filter change from 0 to 0 06:54:59 FLIGetFilterPos err=0 currentPosition=0 06:54:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:54:59 Filter is already there-color wheel unchanged 06:54:59 Received message from Master: op=Shutter serial=115538 06:54:59 Shutter LASER close 06:54:59 Received message from Camera: op=State serial=115540 06:54:59 GetSingleValue result=40 Value=cccccccc 06:54:59 SkyScan query 06:55:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:55:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:00 Parameters OK 06:55:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:00 Set A/D data flow result=40 06:55:00 Set A/D channel type result=40 06:55:00 Set A/D encoding result=40 06:55:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:00 Set channel filter=0.000000e+000 result=40 06:55:00 Config A/D Result=40 06:55:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:00 Get A/D filter: -9.255963e+061 result=40 06:55:00 Get A/D value=-858993460 result=40 06:55:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:00 Parameters OK 06:55:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:00 Set A/D data flow result=40 06:55:00 Set A/D channel type result=40 06:55:00 Set A/D encoding result=40 06:55:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:00 Set channel filter=0.000000e+000 result=40 06:55:00 Config A/D Result=40 06:55:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:00 Get A/D filter: -9.255963e+061 result=40 06:55:00 Get A/D value=-858993460 result=40 06:55:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:00 Aux= 06:55:00 Message to Camera, serial 115540 queued 06:55:37 Received message from Master: op=PointingHead serial=115553 06:55:37 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:55:37 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:55:37 Point started: ret=0 06:55:37 point_skyscan result=0 06:55:38 Check angles 06:55:38 SkyScan query 06:55:38 SkyScan query done: ret=0 az=135.93<-9062 ze=-6.51<-12434 Statuses=0009 0008 06:55:38 Msec=0 True Az=135.93 Ze=-6.51 Az status=0009 Ze status=0008 06:55:39 Check angles 06:55:39 SkyScan query 06:55:39 SkyScan query done: ret=0 az=153.465<-10231 ze=-6.495<-12433 Statuses=0009 0008 06:55:39 Msec=750 True Az=153.465 Ze=-6.495 Az status=0009 Ze status=0008 06:55:39 Check angles 06:55:39 SkyScan query 06:55:40 SkyScan query done: ret=0 az=170.91<-11394 ze=-6.495<-12433 Statuses=0009 0008 06:55:40 Msec=1500 True Az=170.91 Ze=-6.495 Az status=0009 Ze status=0008 06:55:40 Check angles 06:55:40 SkyScan query 06:55:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:55:41 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:55:41 Message to Master queued w/err=0: serial=115553 error=0 06:55:46 Received message from Master: op=Filter serial=115554 06:55:46 Color wheel filter change from 0 to 0 06:55:46 FLIGetFilterPos err=0 currentPosition=0 06:55:46 FLIGetStepsRemaining err=0 RemainingSteps=0 06:55:46 Filter is already there-color wheel unchanged 06:55:46 Received message from Master: op=Shutter serial=115555 06:55:46 Shutter LASER close 06:55:46 Received message from Camera: op=State serial=115557 06:55:46 GetSingleValue result=40 Value=cccccccc 06:55:46 SkyScan query 06:55:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:55:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:46 Parameters OK 06:55:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:46 Set A/D data flow result=40 06:55:46 Set A/D channel type result=40 06:55:46 Set A/D encoding result=40 06:55:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:46 Set channel filter=0.000000e+000 result=40 06:55:46 Config A/D Result=40 06:55:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:46 Get A/D filter: -9.255963e+061 result=40 06:55:46 Get A/D value=-858993460 result=40 06:55:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:46 Parameters OK 06:55:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:46 Set A/D data flow result=40 06:55:46 Set A/D channel type result=40 06:55:46 Set A/D encoding result=40 06:55:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:46 Set channel filter=0.000000e+000 result=40 06:55:46 Config A/D Result=40 06:55:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:46 Get A/D filter: -9.255963e+061 result=40 06:55:46 Get A/D value=-858993460 result=40 06:55:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:46 Aux= 06:55:46 Message to Camera, serial 115557 queued 06:56:23 Received message from Master: op=PointingHead serial=115570 06:56:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:56:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:56:24 Point started: ret=0 06:56:24 point_skyscan result=0 06:56:24 Check angles 06:56:24 SkyScan query 06:56:25 SkyScan query done: ret=0 az=152.835<-10189 ze=6.51<-11566 Statuses=0009 0008 06:56:25 Msec=0 True Az=152.835 Ze=6.51 Az status=0009 Ze status=0008 06:56:25 Check angles 06:56:25 SkyScan query 06:56:26 SkyScan query done: ret=0 az=135.075<-9005 ze=6.495<-11567 Statuses=0009 0008 06:56:26 Msec=750 True Az=135.075 Ze=6.495 Az status=0009 Ze status=0008 06:56:26 Check angles 06:56:26 SkyScan query 06:56:27 SkyScan query done: ret=0 az=117.615<-7841 ze=6.495<-11567 Statuses=0009 0008 06:56:27 Msec=1500 True Az=117.615 Ze=6.495 Az status=0009 Ze status=0008 06:56:27 Check angles 06:56:27 SkyScan query 06:56:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:56:27 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:56:27 Message to Master queued w/err=0: serial=115570 error=0 06:56:32 Received message from Master: op=Filter serial=115571 06:56:32 Color wheel filter change from 0 to 0 06:56:32 FLIGetFilterPos err=0 currentPosition=0 06:56:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:56:32 Filter is already there-color wheel unchanged 06:56:32 Received message from Master: op=Shutter serial=115572 06:56:32 Shutter LASER close 06:56:32 Received message from Camera: op=State serial=115574 06:56:32 GetSingleValue result=40 Value=cccccccc 06:56:32 SkyScan query 06:56:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:56:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:33 Parameters OK 06:56:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:33 Set A/D data flow result=40 06:56:33 Set A/D channel type result=40 06:56:33 Set A/D encoding result=40 06:56:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:33 Set channel filter=0.000000e+000 result=40 06:56:33 Config A/D Result=40 06:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:33 Get A/D filter: -9.255963e+061 result=40 06:56:33 Get A/D value=-858993460 result=40 06:56:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:33 Parameters OK 06:56:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:33 Set A/D data flow result=40 06:56:33 Set A/D channel type result=40 06:56:33 Set A/D encoding result=40 06:56:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:33 Set channel filter=0.000000e+000 result=40 06:56:33 Config A/D Result=40 06:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:33 Get A/D filter: -9.255963e+061 result=40 06:56:33 Get A/D value=-858993460 result=40 06:56:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:56:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:56:33 Aux= 06:56:33 Message to Camera, serial 115574 queued 06:57:10 Received message from Master: op=PointingHead serial=115587 06:57:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:57:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:57:10 Point started: ret=0 06:57:10 point_skyscan result=0 06:57:11 Check angles 06:57:11 SkyScan query 06:57:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 06:57:12 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 06:57:12 Check angles 06:57:12 SkyScan query 06:57:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 06:57:12 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 06:57:12 Check angles 06:57:12 SkyScan query 06:57:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.19<-16346 Statuses=0008 0009 06:57:13 Msec=1500 True Az=112.995 Ze=-65.19 Az status=0008 Ze status=0009 06:57:13 Check angles 06:57:13 SkyScan query 06:57:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.13<-17742 Statuses=0008 0009 06:57:14 Msec=2250 True Az=112.995 Ze=-86.13 Az status=0008 Ze status=0009 06:57:14 Check angles 06:57:14 SkyScan query 06:57:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.085<-19139 Statuses=0008 0009 06:57:15 Msec=3000 True Az=112.995 Ze=-107.085 Az status=0008 Ze status=0009 06:57:15 Check angles 06:57:15 SkyScan query 06:57:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.025<-20535 Statuses=0008 0009 06:57:15 Msec=3750 True Az=112.995 Ze=-128.025 Az status=0008 Ze status=0009 06:57:15 Check angles 06:57:15 SkyScan query 06:57:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.965<-21931 Statuses=0008 0009 06:57:16 Msec=4500 True Az=112.995 Ze=-148.965 Az status=0008 Ze status=0009 06:57:16 Check angles 06:57:16 SkyScan query 06:57:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.92<-23328 Statuses=0008 0009 06:57:17 Msec=5250 True Az=112.995 Ze=-169.92 Az status=0008 Ze status=0009 06:57:17 Check angles 06:57:17 SkyScan query 06:57:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:57:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:57:18 Message to Master queued w/err=0: serial=115587 error=0 06:57:23 Received message from Master: op=Filter serial=115588 06:57:23 Color wheel filter change from 0 to 0 06:57:23 FLIGetFilterPos err=0 currentPosition=0 06:57:23 FLIGetStepsRemaining err=0 RemainingSteps=0 06:57:23 Filter is already there-color wheel unchanged 06:57:23 Received message from Master: op=Shutter serial=115589 06:57:23 Shutter LASER open 06:57:23 Received message from Camera: op=State serial=115591 06:57:23 GetSingleValue result=40 Value=cccccccc 06:57:23 SkyScan query 06:57:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:57:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:23 Parameters OK 06:57:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:23 Set A/D data flow result=40 06:57:23 Set A/D channel type result=40 06:57:23 Set A/D encoding result=40 06:57:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:23 Set channel filter=0.000000e+000 result=40 06:57:23 Config A/D Result=40 06:57:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:23 Get A/D filter: -9.255963e+061 result=40 06:57:23 Get A/D value=-858993460 result=40 06:57:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:23 Parameters OK 06:57:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:23 Set A/D data flow result=40 06:57:23 Set A/D channel type result=40 06:57:23 Set A/D encoding result=40 06:57:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:23 Set channel filter=0.000000e+000 result=40 06:57:23 Config A/D Result=40 06:57:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:23 Get A/D filter: -9.255963e+061 result=40 06:57:23 Get A/D value=-858993460 result=40 06:57:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:57:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:57:23 Aux= 06:57:23 Message to Camera, serial 115591 queued 06:57:32 Received message from Master: op=Shutter serial=115601 06:57:32 Shutter LASER close 06:57:32 Received message from Master: op=PointingHead serial=115605 06:57:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:57:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:57:33 Point started: ret=0 06:57:33 point_skyscan result=0 06:57:33 Check angles 06:57:33 SkyScan query 06:57:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.025<-21535 Statuses=0008 0009 06:57:34 Msec=0 True Az=112.995 Ze=-143.025 Az status=0008 Ze status=0009 06:57:34 Check angles 06:57:34 SkyScan query 06:57:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 06:57:35 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 06:57:35 Check angles 06:57:35 SkyScan query 06:57:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 06:57:36 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 06:57:36 Check angles 06:57:36 SkyScan query 06:57:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 06:57:36 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 06:57:36 Check angles 06:57:36 SkyScan query 06:57:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 06:57:37 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 06:57:37 Check angles 06:57:37 SkyScan query 06:57:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 06:57:38 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 06:57:38 Check angles 06:57:38 SkyScan query 06:57:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.265<-13151 Statuses=0008 0009 06:57:39 Msec=4500 True Az=112.995 Ze=-17.265 Az status=0008 Ze status=0009 06:57:39 Check angles 06:57:39 SkyScan query 06:57:39 SkyScan query done: ret=0 az=112.995<-7533 ze=3.69<-11754 Statuses=0008 0009 06:57:39 Msec=5250 True Az=112.995 Ze=3.69 Az status=0008 Ze status=0009 06:57:39 Check angles 06:57:39 SkyScan query 06:57:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:57:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:57:40 Message to Master queued w/err=0: serial=115605 error=0 06:57:45 Received message from Master: op=Filter serial=115606 06:57:45 Color wheel filter change from 0 to 0 06:57:45 FLIGetFilterPos err=0 currentPosition=0 06:57:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:57:45 Filter is already there-color wheel unchanged 06:57:45 Received message from Master: op=Shutter serial=115607 06:57:45 Shutter LASER close 06:57:45 Received message from Camera: op=State serial=115609 06:57:45 GetSingleValue result=40 Value=cccccccc 06:57:45 SkyScan query 06:57:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:57:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:46 Parameters OK 06:57:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:46 Set A/D data flow result=40 06:57:46 Set A/D channel type result=40 06:57:46 Set A/D encoding result=40 06:57:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:46 Set channel filter=0.000000e+000 result=40 06:57:46 Config A/D Result=40 06:57:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:46 Get A/D filter: -9.255963e+061 result=40 06:57:46 Get A/D value=-858993460 result=40 06:57:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:46 Parameters OK 06:57:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:46 Set A/D data flow result=40 06:57:46 Set A/D channel type result=40 06:57:46 Set A/D encoding result=40 06:57:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:46 Set channel filter=0.000000e+000 result=40 06:57:46 Config A/D Result=40 06:57:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:46 Get A/D filter: -9.255963e+061 result=40 06:57:46 Get A/D value=-858993460 result=40 06:57:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:57:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:57:46 Aux= 06:57:46 Message to Camera, serial 115609 queued 06:58:23 Received message from Master: op=PointingHead serial=115622 06:58:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:58:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:58:23 Point started: ret=0 06:58:23 point_skyscan result=0 06:58:24 Check angles 06:58:24 SkyScan query 06:58:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:58:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:58:24 Message to Master queued w/err=0: serial=115622 error=0 06:58:29 Received message from Master: op=Filter serial=115623 06:58:29 Color wheel filter change from 0 to 0 06:58:29 FLIGetFilterPos err=0 currentPosition=0 06:58:29 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:29 Filter is already there-color wheel unchanged 06:58:30 Received message from Master: op=Shutter serial=115624 06:58:30 Shutter LASER close 06:58:30 Received message from Camera: op=State serial=115626 06:58:30 GetSingleValue result=40 Value=cccccccc 06:58:30 SkyScan query 06:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:58:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:30 Parameters OK 06:58:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:30 Set A/D data flow result=40 06:58:30 Set A/D channel type result=40 06:58:30 Set A/D encoding result=40 06:58:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:30 Set channel filter=0.000000e+000 result=40 06:58:30 Config A/D Result=40 06:58:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:30 Get A/D filter: -9.255963e+061 result=40 06:58:30 Get A/D value=-858993460 result=40 06:58:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:30 Parameters OK 06:58:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:30 Set A/D data flow result=40 06:58:30 Set A/D channel type result=40 06:58:30 Set A/D encoding result=40 06:58:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:30 Set channel filter=0.000000e+000 result=40 06:58:30 Config A/D Result=40 06:58:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:30 Get A/D filter: -9.255963e+061 result=40 06:58:30 Get A/D value=-858993460 result=40 06:58:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:30 Aux= 06:58:30 Message to Camera, serial 115626 queued 06:59:07 Received message from Master: op=PointingHead serial=115639 06:59:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:59:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:59:07 Point started: ret=0 06:59:07 point_skyscan result=0 06:59:08 Check angles 06:59:08 SkyScan query 06:59:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:59:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:59:09 Message to Master queued w/err=0: serial=115639 error=0 06:59:14 Received message from Master: op=Filter serial=115640 06:59:14 Color wheel filter change from 0 to 0 06:59:14 FLIGetFilterPos err=0 currentPosition=0 06:59:14 FLIGetStepsRemaining err=0 RemainingSteps=0 06:59:14 Filter is already there-color wheel unchanged 06:59:14 Received message from Master: op=Shutter serial=115641 06:59:14 Shutter LASER close 06:59:14 Received message from Camera: op=State serial=115643 06:59:14 GetSingleValue result=40 Value=cccccccc 06:59:14 SkyScan query 06:59:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:59:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:15 Parameters OK 06:59:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:15 Set A/D data flow result=40 06:59:15 Set A/D channel type result=40 06:59:15 Set A/D encoding result=40 06:59:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:15 Set channel filter=0.000000e+000 result=40 06:59:15 Config A/D Result=40 06:59:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:15 Get A/D filter: -9.255963e+061 result=40 06:59:15 Get A/D value=-858993460 result=40 06:59:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:15 Parameters OK 06:59:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:15 Set A/D data flow result=40 06:59:15 Set A/D channel type result=40 06:59:15 Set A/D encoding result=40 06:59:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:15 Set channel filter=0.000000e+000 result=40 06:59:15 Config A/D Result=40 06:59:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:15 Get A/D filter: -9.255963e+061 result=40 06:59:15 Get A/D value=-858993460 result=40 06:59:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:59:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:59:15 Aux= 06:59:15 Message to Camera, serial 115643 queued 06:59:51 Received message from Master: op=PointingHead serial=115656 06:59:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:59:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:59:52 Point started: ret=0 06:59:52 point_skyscan result=0 06:59:53 Check angles 06:59:53 SkyScan query 06:59:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:59:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:59:53 Message to Master queued w/err=0: serial=115656 error=0 06:59:58 Received message from Master: op=Filter serial=115657 06:59:58 Color wheel filter change from 0 to 0 06:59:58 FLIGetFilterPos err=0 currentPosition=0 06:59:58 FLIGetStepsRemaining err=0 RemainingSteps=0 06:59:58 Filter is already there-color wheel unchanged 06:59:58 Received message from Master: op=Shutter serial=115658 06:59:58 Shutter LASER close 06:59:58 Received message from Camera: op=State serial=115660 06:59:58 GetSingleValue result=40 Value=cccccccc 06:59:58 SkyScan query 06:59:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:59:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:59 Parameters OK 06:59:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:59 Set A/D data flow result=40 06:59:59 Set A/D channel type result=40 06:59:59 Set A/D encoding result=40 06:59:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:59 Set channel filter=0.000000e+000 result=40 06:59:59 Config A/D Result=40 06:59:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:59 Get A/D filter: -9.255963e+061 result=40 06:59:59 Get A/D value=-858993460 result=40 06:59:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:59 Parameters OK 06:59:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:59 Set A/D data flow result=40 06:59:59 Set A/D channel type result=40 06:59:59 Set A/D encoding result=40 06:59:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:59 Set channel filter=0.000000e+000 result=40 06:59:59 Config A/D Result=40 06:59:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:59 Get A/D filter: -9.255963e+061 result=40 06:59:59 Get A/D value=-858993460 result=40 06:59:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:59:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:59:59 Aux= 06:59:59 Message to Camera, serial 115660 queued 07:00:36 Received message from Master: op=PointingHead serial=115673 07:00:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:00:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:00:36 Point started: ret=0 07:00:36 point_skyscan result=0 07:00:37 Check angles 07:00:37 SkyScan query 07:00:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 07:00:37 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 07:00:38 Check angles 07:00:38 SkyScan query 07:00:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.28<-14952 Statuses=0008 0009 07:00:38 Msec=750 True Az=112.995 Ze=-44.28 Az status=0008 Ze status=0009 07:00:38 Check angles 07:00:38 SkyScan query 07:00:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.205<-16347 Statuses=0008 0009 07:00:39 Msec=1500 True Az=112.995 Ze=-65.205 Az status=0008 Ze status=0009 07:00:39 Check angles 07:00:39 SkyScan query 07:00:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.145<-17743 Statuses=0008 0009 07:00:40 Msec=2250 True Az=112.995 Ze=-86.145 Az status=0008 Ze status=0009 07:00:40 Check angles 07:00:40 SkyScan query 07:00:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.115<-19141 Statuses=0008 0009 07:00:40 Msec=3000 True Az=112.995 Ze=-107.115 Az status=0008 Ze status=0009 07:00:41 Check angles 07:00:41 SkyScan query 07:00:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.04<-20536 Statuses=0008 0009 07:00:41 Msec=3750 True Az=112.995 Ze=-128.04 Az status=0008 Ze status=0009 07:00:41 Check angles 07:00:41 SkyScan query 07:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.995<-21933 Statuses=0008 0009 07:00:42 Msec=4500 True Az=112.995 Ze=-148.995 Az status=0008 Ze status=0009 07:00:42 Check angles 07:00:42 SkyScan query 07:00:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.95<-23330 Statuses=0008 0009 07:00:43 Msec=5250 True Az=112.995 Ze=-169.95 Az status=0008 Ze status=0009 07:00:43 Check angles 07:00:43 SkyScan query 07:00:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:00:43 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:00:43 Message to Master queued w/err=0: serial=115673 error=0 07:00:48 Received message from Master: op=Filter serial=115674 07:00:48 Color wheel filter change from 0 to 0 07:00:48 FLIGetFilterPos err=0 currentPosition=0 07:00:48 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:48 Filter is already there-color wheel unchanged 07:00:49 Received message from Master: op=Shutter serial=115675 07:00:49 Shutter LASER open 07:00:49 Received message from Camera: op=State serial=115677 07:00:49 GetSingleValue result=40 Value=cccccccc 07:00:49 SkyScan query 07:00:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:00:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:49 Parameters OK 07:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:49 Set A/D data flow result=40 07:00:49 Set A/D channel type result=40 07:00:49 Set A/D encoding result=40 07:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:49 Set channel filter=0.000000e+000 result=40 07:00:49 Config A/D Result=40 07:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:49 Get A/D filter: -9.255963e+061 result=40 07:00:49 Get A/D value=-858993460 result=40 07:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:49 Parameters OK 07:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:49 Set A/D data flow result=40 07:00:49 Set A/D channel type result=40 07:00:49 Set A/D encoding result=40 07:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:49 Set channel filter=0.000000e+000 result=40 07:00:49 Config A/D Result=40 07:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:49 Get A/D filter: -9.255963e+061 result=40 07:00:49 Get A/D value=-858993460 result=40 07:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:00:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:00:49 Aux= 07:00:49 Message to Camera, serial 115677 queued 07:00:58 Received message from Master: op=Shutter serial=115687 07:00:58 Shutter LASER close 07:00:58 Received message from Master: op=PointingHead serial=115691 07:00:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:00:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:00:59 Point started: ret=0 07:00:59 point_skyscan result=0 07:00:59 Check angles 07:00:59 SkyScan query 07:01:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 07:01:00 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 07:01:00 Check angles 07:01:00 SkyScan query 07:01:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.445<-20163 Statuses=0008 0009 07:01:01 Msec=750 True Az=112.995 Ze=-122.445 Az status=0008 Ze status=0009 07:01:01 Check angles 07:01:01 SkyScan query 07:01:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.475<-18765 Statuses=0008 0009 07:01:02 Msec=1500 True Az=112.995 Ze=-101.475 Az status=0008 Ze status=0009 07:01:02 Check angles 07:01:02 SkyScan query 07:01:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.505<-17367 Statuses=0008 0009 07:01:02 Msec=2250 True Az=112.995 Ze=-80.505 Az status=0008 Ze status=0009 07:01:02 Check angles 07:01:02 SkyScan query 07:01:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.565<-15971 Statuses=0008 0009 07:01:03 Msec=3000 True Az=112.995 Ze=-59.565 Az status=0008 Ze status=0009 07:01:03 Check angles 07:01:03 SkyScan query 07:01:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.595<-14573 Statuses=0008 0009 07:01:04 Msec=3750 True Az=112.995 Ze=-38.595 Az status=0008 Ze status=0009 07:01:04 Check angles 07:01:04 SkyScan query 07:01:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.64<-13176 Statuses=0008 0009 07:01:05 Msec=4500 True Az=112.995 Ze=-17.64 Az status=0008 Ze status=0009 07:01:05 Check angles 07:01:05 SkyScan query 07:01:05 SkyScan query done: ret=0 az=112.98<-7532 ze=3.3<-11780 Statuses=0008 0009 07:01:05 Msec=5250 True Az=112.98 Ze=3.3 Az status=0008 Ze status=0009 07:01:05 Check angles 07:01:05 SkyScan query 07:01:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:01:06 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:01:06 Message to Master queued w/err=0: serial=115691 error=0 07:01:11 Received message from Master: op=Filter serial=115692 07:01:11 Color wheel filter change from 0 to 0 07:01:11 FLIGetFilterPos err=0 currentPosition=0 07:01:11 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:11 Filter is already there-color wheel unchanged 07:01:11 Received message from Master: op=Shutter serial=115693 07:01:11 Shutter LASER close 07:01:11 Received message from Camera: op=State serial=115695 07:01:11 GetSingleValue result=40 Value=cccccccc 07:01:11 SkyScan query 07:01:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:01:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:12 Parameters OK 07:01:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:12 Set A/D data flow result=40 07:01:12 Set A/D channel type result=40 07:01:12 Set A/D encoding result=40 07:01:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:12 Set channel filter=0.000000e+000 result=40 07:01:12 Config A/D Result=40 07:01:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:12 Get A/D filter: -9.255963e+061 result=40 07:01:12 Get A/D value=-858993460 result=40 07:01:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:12 Parameters OK 07:01:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:12 Set A/D data flow result=40 07:01:12 Set A/D channel type result=40 07:01:12 Set A/D encoding result=40 07:01:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:12 Set channel filter=0.000000e+000 result=40 07:01:12 Config A/D Result=40 07:01:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:12 Get A/D filter: -9.255963e+061 result=40 07:01:12 Get A/D value=-858993460 result=40 07:01:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:01:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:01:12 Aux= 07:01:12 Message to Camera, serial 115695 queued 07:01:49 Received message from Master: op=PointingHead serial=115708 07:01:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:01:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:01:49 Point started: ret=0 07:01:49 point_skyscan result=0 07:01:50 Check angles 07:01:50 SkyScan query 07:01:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:01:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:01:50 Message to Master queued w/err=0: serial=115708 error=0 07:01:55 Received message from Master: op=Filter serial=115709 07:01:55 Color wheel filter change from 0 to 0 07:01:55 FLIGetFilterPos err=0 currentPosition=0 07:01:55 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:55 Filter is already there-color wheel unchanged 07:01:56 Received message from Master: op=Shutter serial=115710 07:01:56 Shutter LASER close 07:01:56 Received message from Camera: op=State serial=115712 07:01:56 GetSingleValue result=40 Value=cccccccc 07:01:56 SkyScan query 07:01:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:01:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:56 Parameters OK 07:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:56 Set A/D data flow result=40 07:01:56 Set A/D channel type result=40 07:01:56 Set A/D encoding result=40 07:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:56 Set channel filter=0.000000e+000 result=40 07:01:56 Config A/D Result=40 07:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:56 Get A/D filter: -9.255963e+061 result=40 07:01:56 Get A/D value=-858993460 result=40 07:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:56 Parameters OK 07:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:56 Set A/D data flow result=40 07:01:56 Set A/D channel type result=40 07:01:56 Set A/D encoding result=40 07:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:56 Set channel filter=0.000000e+000 result=40 07:01:56 Config A/D Result=40 07:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:56 Get A/D filter: -9.255963e+061 result=40 07:01:56 Get A/D value=-858993460 result=40 07:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:01:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:01:56 Aux= 07:01:56 Message to Camera, serial 115712 queued 07:02:33 Received message from Master: op=PointingHead serial=115725 07:02:33 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:02:33 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:02:33 Point started: ret=0 07:02:33 point_skyscan result=0 07:02:34 Check angles 07:02:34 SkyScan query 07:02:35 SkyScan query done: ret=0 az=136.2<-9080 ze=-6.51<-12434 Statuses=0009 0008 07:02:35 Msec=0 True Az=136.2 Ze=-6.51 Az status=0009 Ze status=0008 07:02:35 Check angles 07:02:35 SkyScan query 07:02:36 SkyScan query done: ret=0 az=153.78<-10252 ze=-6.495<-12433 Statuses=0009 0008 07:02:36 Msec=750 True Az=153.78 Ze=-6.495 Az status=0009 Ze status=0008 07:02:36 Check angles 07:02:36 SkyScan query 07:02:36 SkyScan query done: ret=0 az=171.195<-11413 ze=-6.495<-12433 Statuses=0009 0008 07:02:36 Msec=1500 True Az=171.195 Ze=-6.495 Az status=0009 Ze status=0008 07:02:36 Check angles 07:02:36 SkyScan query 07:02:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:02:37 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:02:37 Message to Master queued w/err=0: serial=115725 error=0 07:02:42 Received message from Master: op=Filter serial=115726 07:02:42 Color wheel filter change from 0 to 0 07:02:42 FLIGetFilterPos err=0 currentPosition=0 07:02:42 FLIGetStepsRemaining err=0 RemainingSteps=0 07:02:42 Filter is already there-color wheel unchanged 07:02:42 Received message from Master: op=Shutter serial=115727 07:02:42 Shutter LASER close 07:02:42 Received message from Camera: op=State serial=115729 07:02:42 GetSingleValue result=40 Value=cccccccc 07:02:42 SkyScan query 07:02:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:02:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:43 Parameters OK 07:02:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:43 Set A/D data flow result=40 07:02:43 Set A/D channel type result=40 07:02:43 Set A/D encoding result=40 07:02:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:43 Set channel filter=0.000000e+000 result=40 07:02:43 Config A/D Result=40 07:02:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:43 Get A/D filter: -9.255963e+061 result=40 07:02:43 Get A/D value=-858993460 result=40 07:02:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:43 Parameters OK 07:02:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:43 Set A/D data flow result=40 07:02:43 Set A/D channel type result=40 07:02:43 Set A/D encoding result=40 07:02:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:43 Set channel filter=0.000000e+000 result=40 07:02:43 Config A/D Result=40 07:02:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:43 Get A/D filter: -9.255963e+061 result=40 07:02:43 Get A/D value=-858993460 result=40 07:02:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:02:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:02:43 Aux= 07:02:43 Message to Camera, serial 115729 queued 07:03:20 Received message from Master: op=PointingHead serial=115742 07:03:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:03:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:03:20 Point started: ret=0 07:03:20 point_skyscan result=0 07:03:21 Check angles 07:03:21 SkyScan query 07:03:21 SkyScan query done: ret=0 az=153.195<-10213 ze=6.51<-11566 Statuses=0009 0008 07:03:21 Msec=0 True Az=153.195 Ze=6.51 Az status=0009 Ze status=0008 07:03:22 Check angles 07:03:22 SkyScan query 07:03:22 SkyScan query done: ret=0 az=135.315<-9021 ze=6.495<-11567 Statuses=0009 0008 07:03:22 Msec=750 True Az=135.315 Ze=6.495 Az status=0009 Ze status=0008 07:03:22 Check angles 07:03:22 SkyScan query 07:03:23 SkyScan query done: ret=0 az=117.855<-7857 ze=6.495<-11567 Statuses=0009 0008 07:03:23 Msec=1500 True Az=117.855 Ze=6.495 Az status=0009 Ze status=0008 07:03:23 Check angles 07:03:23 SkyScan query 07:03:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:03:24 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:03:24 Message to Master queued w/err=0: serial=115742 error=0 07:03:29 Received message from Master: op=Filter serial=115743 07:03:29 Color wheel filter change from 0 to 0 07:03:29 FLIGetFilterPos err=0 currentPosition=0 07:03:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:03:29 Filter is already there-color wheel unchanged 07:03:29 Received message from Master: op=Shutter serial=115744 07:03:29 Shutter LASER close 07:03:29 Received message from Camera: op=State serial=115746 07:03:29 GetSingleValue result=40 Value=cccccccc 07:03:29 SkyScan query 07:03:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:03:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:29 Parameters OK 07:03:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:29 Set A/D data flow result=40 07:03:29 Set A/D channel type result=40 07:03:29 Set A/D encoding result=40 07:03:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:29 Set channel filter=0.000000e+000 result=40 07:03:29 Config A/D Result=40 07:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:29 Get A/D filter: -9.255963e+061 result=40 07:03:29 Get A/D value=-858993460 result=40 07:03:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:29 Parameters OK 07:03:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:29 Set A/D data flow result=40 07:03:29 Set A/D channel type result=40 07:03:29 Set A/D encoding result=40 07:03:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:29 Set channel filter=0.000000e+000 result=40 07:03:29 Config A/D Result=40 07:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:29 Get A/D filter: -9.255963e+061 result=40 07:03:29 Get A/D value=-858993460 result=40 07:03:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:03:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:03:29 Aux= 07:03:29 Message to Camera, serial 115746 queued 07:03:38 Received message from Master: op=Identify serial=115747 [UTC 2019-3-5 07:03:50] 07:04:05 Received message from Master: op=PointingHead serial=115761 07:04:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:04:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:04:06 Point started: ret=0 07:04:06 point_skyscan result=0 07:04:06 Check angles 07:04:06 SkyScan query 07:04:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.025<-13535 Statuses=0008 0009 07:04:07 Msec=0 True Az=112.995 Ze=-23.025 Az status=0008 Ze status=0009 07:04:07 Check angles 07:04:07 SkyScan query 07:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.01<-14934 Statuses=0008 0009 07:04:08 Msec=750 True Az=112.995 Ze=-44.01 Az status=0008 Ze status=0009 07:04:08 Check angles 07:04:08 SkyScan query 07:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.935<-16329 Statuses=0008 0009 07:04:08 Msec=1500 True Az=112.995 Ze=-64.935 Az status=0008 Ze status=0009 07:04:09 Check angles 07:04:09 SkyScan query 07:04:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.92<-17728 Statuses=0008 0009 07:04:09 Msec=2250 True Az=112.995 Ze=-85.92 Az status=0008 Ze status=0009 07:04:09 Check angles 07:04:09 SkyScan query 07:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.815<-19121 Statuses=0008 0009 07:04:10 Msec=3000 True Az=112.995 Ze=-106.815 Az status=0008 Ze status=0009 07:04:10 Check angles 07:04:10 SkyScan query 07:04:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.77<-20518 Statuses=0008 0009 07:04:11 Msec=3750 True Az=112.995 Ze=-127.77 Az status=0008 Ze status=0009 07:04:11 Check angles 07:04:11 SkyScan query 07:04:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.695<-21913 Statuses=0008 0009 07:04:11 Msec=4500 True Az=112.995 Ze=-148.695 Az status=0008 Ze status=0009 07:04:12 Check angles 07:04:12 SkyScan query 07:04:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.68<-23312 Statuses=0008 0009 07:04:12 Msec=5250 True Az=112.995 Ze=-169.68 Az status=0008 Ze status=0009 07:04:12 Check angles 07:04:12 SkyScan query 07:04:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:04:13 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:04:13 Message to Master queued w/err=0: serial=115761 error=0 07:04:18 Received message from Master: op=Filter serial=115762 07:04:18 Color wheel filter change from 0 to 0 07:04:18 FLIGetFilterPos err=0 currentPosition=0 07:04:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:04:18 Filter is already there-color wheel unchanged 07:04:18 Received message from Master: op=Shutter serial=115763 07:04:18 Shutter LASER open 07:04:18 Received message from Camera: op=State serial=115765 07:04:18 GetSingleValue result=40 Value=cccccccc 07:04:18 SkyScan query 07:04:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:04:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:19 Parameters OK 07:04:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:19 Set A/D data flow result=40 07:04:19 Set A/D channel type result=40 07:04:19 Set A/D encoding result=40 07:04:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:19 Set channel filter=0.000000e+000 result=40 07:04:19 Config A/D Result=40 07:04:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:19 Get A/D filter: -9.255963e+061 result=40 07:04:19 Get A/D value=-858993460 result=40 07:04:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:19 Parameters OK 07:04:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:19 Set A/D data flow result=40 07:04:19 Set A/D channel type result=40 07:04:19 Set A/D encoding result=40 07:04:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:19 Set channel filter=0.000000e+000 result=40 07:04:19 Config A/D Result=40 07:04:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:19 Get A/D filter: -9.255963e+061 result=40 07:04:19 Get A/D value=-858993460 result=40 07:04:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:04:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:04:19 Aux= 07:04:19 Message to Camera, serial 115765 queued 07:04:26 Received message from Master: op=Shutter serial=115774 07:04:26 Shutter LASER close 07:04:27 Received message from Master: op=PointingHead serial=115778 07:04:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:04:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:04:27 Point started: ret=0 07:04:27 point_skyscan result=0 07:04:28 Check angles 07:04:28 SkyScan query 07:04:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 07:04:28 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 07:04:29 Check angles 07:04:29 SkyScan query 07:04:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.445<-20163 Statuses=0008 0009 07:04:29 Msec=750 True Az=112.995 Ze=-122.445 Az status=0008 Ze status=0009 07:04:29 Check angles 07:04:29 SkyScan query 07:04:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.055<-18737 Statuses=0008 0009 07:04:30 Msec=1500 True Az=112.995 Ze=-101.055 Az status=0008 Ze status=0009 07:04:30 Check angles 07:04:30 SkyScan query 07:04:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.1<-17340 Statuses=0008 0009 07:04:31 Msec=2250 True Az=112.995 Ze=-80.1 Az status=0008 Ze status=0009 07:04:31 Check angles 07:04:31 SkyScan query 07:04:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 07:04:31 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 07:04:32 Check angles 07:04:32 SkyScan query 07:04:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.13<-14542 Statuses=0008 0009 07:04:32 Msec=3750 True Az=112.995 Ze=-38.13 Az status=0008 Ze status=0009 07:04:32 Check angles 07:04:32 SkyScan query 07:04:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.725<-13115 Statuses=0008 0009 07:04:33 Msec=4500 True Az=112.995 Ze=-16.725 Az status=0008 Ze status=0009 07:04:33 Check angles 07:04:33 SkyScan query 07:04:34 SkyScan query done: ret=0 az=113.01<-7534 ze=4.215<-11719 Statuses=0008 0009 07:04:34 Msec=5250 True Az=113.01 Ze=4.215 Az status=0008 Ze status=0009 07:04:34 Check angles 07:04:34 SkyScan query 07:04:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:04:35 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:04:35 Message to Master queued w/err=0: serial=115778 error=0 07:04:40 Received message from Master: op=Filter serial=115779 07:04:40 Color wheel filter change from 0 to 0 07:04:40 FLIGetFilterPos err=0 currentPosition=0 07:04:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:04:40 Filter is already there-color wheel unchanged 07:04:40 Received message from Master: op=Shutter serial=115780 07:04:40 Shutter LASER close 07:04:40 Received message from Camera: op=State serial=115782 07:04:40 GetSingleValue result=40 Value=cccccccc 07:04:40 SkyScan query 07:04:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:04:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:40 Parameters OK 07:04:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:40 Set A/D data flow result=40 07:04:40 Set A/D channel type result=40 07:04:40 Set A/D encoding result=40 07:04:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:40 Set channel filter=0.000000e+000 result=40 07:04:40 Config A/D Result=40 07:04:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:40 Get A/D filter: -9.255963e+061 result=40 07:04:40 Get A/D value=-858993460 result=40 07:04:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:40 Parameters OK 07:04:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:40 Set A/D data flow result=40 07:04:40 Set A/D channel type result=40 07:04:40 Set A/D encoding result=40 07:04:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:40 Set channel filter=0.000000e+000 result=40 07:04:40 Config A/D Result=40 07:04:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:40 Get A/D filter: -9.255963e+061 result=40 07:04:40 Get A/D value=-858993460 result=40 07:04:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:04:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:04:40 Aux= 07:04:40 Message to Camera, serial 115782 queued 07:05:17 Received message from Master: op=PointingHead serial=115795 07:05:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:05:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:05:18 Point started: ret=0 07:05:18 point_skyscan result=0 07:05:18 Check angles 07:05:18 SkyScan query 07:05:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:05:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:05:19 Message to Master queued w/err=0: serial=115795 error=0 07:05:24 Received message from Master: op=Filter serial=115796 07:05:24 Color wheel filter change from 0 to 0 07:05:24 FLIGetFilterPos err=0 currentPosition=0 07:05:24 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:24 Filter is already there-color wheel unchanged 07:05:24 Received message from Master: op=Shutter serial=115797 07:05:24 Shutter LASER close 07:05:24 Received message from Camera: op=State serial=115799 07:05:24 GetSingleValue result=40 Value=cccccccc 07:05:24 SkyScan query 07:05:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:05:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:25 Parameters OK 07:05:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:25 Set A/D data flow result=40 07:05:25 Set A/D channel type result=40 07:05:25 Set A/D encoding result=40 07:05:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:25 Set channel filter=0.000000e+000 result=40 07:05:25 Config A/D Result=40 07:05:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:25 Get A/D filter: -9.255963e+061 result=40 07:05:25 Get A/D value=-858993460 result=40 07:05:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:25 Parameters OK 07:05:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:25 Set A/D data flow result=40 07:05:25 Set A/D channel type result=40 07:05:25 Set A/D encoding result=40 07:05:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:25 Set channel filter=0.000000e+000 result=40 07:05:25 Config A/D Result=40 07:05:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:25 Get A/D filter: -9.255963e+061 result=40 07:05:25 Get A/D value=-858993460 result=40 07:05:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:25 Aux= 07:05:25 Message to Camera, serial 115799 queued 07:06:02 Received message from Master: op=PointingHead serial=115812 07:06:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:06:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:06:02 Point started: ret=0 07:06:02 point_skyscan result=0 07:06:03 Check angles 07:06:03 SkyScan query 07:06:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:06:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:06:03 Message to Master queued w/err=0: serial=115812 error=0 07:06:08 Received message from Master: op=Filter serial=115813 07:06:08 Color wheel filter change from 0 to 0 07:06:08 FLIGetFilterPos err=0 currentPosition=0 07:06:08 FLIGetStepsRemaining err=0 RemainingSteps=0 07:06:08 Filter is already there-color wheel unchanged 07:06:08 Received message from Master: op=Shutter serial=115814 07:06:08 Shutter LASER close 07:06:08 Received message from Camera: op=State serial=115816 07:06:08 GetSingleValue result=40 Value=cccccccc 07:06:08 SkyScan query 07:06:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:06:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:09 Parameters OK 07:06:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:09 Set A/D data flow result=40 07:06:09 Set A/D channel type result=40 07:06:09 Set A/D encoding result=40 07:06:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:09 Set channel filter=0.000000e+000 result=40 07:06:09 Config A/D Result=40 07:06:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:09 Get A/D filter: -9.255963e+061 result=40 07:06:09 Get A/D value=-858993460 result=40 07:06:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:09 Parameters OK 07:06:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:09 Set A/D data flow result=40 07:06:09 Set A/D channel type result=40 07:06:09 Set A/D encoding result=40 07:06:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:09 Set channel filter=0.000000e+000 result=40 07:06:09 Config A/D Result=40 07:06:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:09 Get A/D filter: -9.255963e+061 result=40 07:06:09 Get A/D value=-858993460 result=40 07:06:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:06:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:06:09 Aux= 07:06:09 Message to Camera, serial 115816 queued 07:06:46 Received message from Master: op=PointingHead serial=115829 07:06:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:06:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:06:46 Point started: ret=0 07:06:46 point_skyscan result=0 07:06:47 Check angles 07:06:47 SkyScan query 07:06:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:06:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:06:48 Message to Master queued w/err=0: serial=115829 error=0 07:06:53 Received message from Master: op=Filter serial=115830 07:06:53 Color wheel filter change from 0 to 0 07:06:53 FLIGetFilterPos err=0 currentPosition=0 07:06:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:06:53 Filter is already there-color wheel unchanged 07:06:53 Received message from Master: op=Shutter serial=115831 07:06:53 Shutter LASER close 07:06:53 Received message from Camera: op=State serial=115833 07:06:53 GetSingleValue result=40 Value=cccccccc 07:06:53 SkyScan query 07:06:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:06:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:53 Parameters OK 07:06:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:53 Set A/D data flow result=40 07:06:53 Set A/D channel type result=40 07:06:53 Set A/D encoding result=40 07:06:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:53 Set channel filter=0.000000e+000 result=40 07:06:53 Config A/D Result=40 07:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:53 Get A/D filter: -9.255963e+061 result=40 07:06:53 Get A/D value=-858993460 result=40 07:06:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:53 Parameters OK 07:06:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:53 Set A/D data flow result=40 07:06:53 Set A/D channel type result=40 07:06:53 Set A/D encoding result=40 07:06:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:53 Set channel filter=0.000000e+000 result=40 07:06:53 Config A/D Result=40 07:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:53 Get A/D filter: -9.255963e+061 result=40 07:06:53 Get A/D value=-858993460 result=40 07:06:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:06:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:06:53 Aux= 07:06:53 Message to Camera, serial 115833 queued 07:07:30 Received message from Master: op=PointingHead serial=115846 07:07:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:07:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:07:31 Point started: ret=0 07:07:31 point_skyscan result=0 07:07:31 Check angles 07:07:31 SkyScan query 07:07:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.775<-13585 Statuses=0008 0009 07:07:32 Msec=0 True Az=112.995 Ze=-23.775 Az status=0008 Ze status=0009 07:07:32 Check angles 07:07:32 SkyScan query 07:07:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.73<-14982 Statuses=0008 0009 07:07:33 Msec=750 True Az=112.995 Ze=-44.73 Az status=0008 Ze status=0009 07:07:33 Check angles 07:07:33 SkyScan query 07:07:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.685<-16379 Statuses=0008 0009 07:07:33 Msec=1500 True Az=112.995 Ze=-65.685 Az status=0008 Ze status=0009 07:07:34 Check angles 07:07:34 SkyScan query 07:07:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.075<-17805 Statuses=0008 0009 07:07:34 Msec=2250 True Az=112.995 Ze=-87.075 Az status=0008 Ze status=0009 07:07:34 Check angles 07:07:34 SkyScan query 07:07:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.495<-19233 Statuses=0008 0009 07:07:35 Msec=3000 True Az=112.995 Ze=-108.495 Az status=0008 Ze status=0009 07:07:35 Check angles 07:07:35 SkyScan query 07:07:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.45<-20630 Statuses=0008 0009 07:07:36 Msec=3750 True Az=112.995 Ze=-129.45 Az status=0008 Ze status=0009 07:07:36 Check angles 07:07:36 SkyScan query 07:07:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.405<-22027 Statuses=0008 0009 07:07:36 Msec=4500 True Az=112.995 Ze=-150.405 Az status=0008 Ze status=0009 07:07:37 Check angles 07:07:37 SkyScan query 07:07:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.165<-23411 Statuses=0008 0009 07:07:37 Msec=5250 True Az=112.995 Ze=-171.165 Az status=0008 Ze status=0009 07:07:37 Check angles 07:07:37 SkyScan query 07:07:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:07:38 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:07:38 Message to Master queued w/err=0: serial=115846 error=0 07:07:43 Received message from Master: op=Filter serial=115847 07:07:43 Color wheel filter change from 0 to 0 07:07:43 FLIGetFilterPos err=0 currentPosition=0 07:07:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:07:43 Filter is already there-color wheel unchanged 07:07:43 Received message from Master: op=Shutter serial=115848 07:07:43 Shutter LASER open 07:07:43 Received message from Camera: op=State serial=115850 07:07:43 GetSingleValue result=40 Value=cccccccc 07:07:43 SkyScan query 07:07:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:07:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:44 Parameters OK 07:07:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:44 Set A/D data flow result=40 07:07:44 Set A/D channel type result=40 07:07:44 Set A/D encoding result=40 07:07:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:44 Set channel filter=0.000000e+000 result=40 07:07:44 Config A/D Result=40 07:07:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:44 Get A/D filter: -9.255963e+061 result=40 07:07:44 Get A/D value=-858993460 result=40 07:07:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:44 Parameters OK 07:07:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:44 Set A/D data flow result=40 07:07:44 Set A/D channel type result=40 07:07:44 Set A/D encoding result=40 07:07:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:44 Set channel filter=0.000000e+000 result=40 07:07:44 Config A/D Result=40 07:07:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:44 Get A/D filter: -9.255963e+061 result=40 07:07:44 Get A/D value=-858993460 result=40 07:07:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:07:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:07:44 Aux= 07:07:44 Message to Camera, serial 115850 queued 07:07:52 Received message from Master: op=Shutter serial=115860 07:07:52 Shutter LASER close 07:07:53 Received message from Master: op=PointingHead serial=115864 07:07:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:07:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:07:53 Point started: ret=0 07:07:53 point_skyscan result=0 07:07:54 Check angles 07:07:54 SkyScan query 07:07:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 07:07:54 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 07:07:55 Check angles 07:07:55 SkyScan query 07:07:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.505<-20167 Statuses=0008 0009 07:07:55 Msec=750 True Az=112.995 Ze=-122.505 Az status=0008 Ze status=0009 07:07:55 Check angles 07:07:55 SkyScan query 07:07:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.52<-18768 Statuses=0008 0009 07:07:56 Msec=1500 True Az=112.995 Ze=-101.52 Az status=0008 Ze status=0009 07:07:56 Check angles 07:07:56 SkyScan query 07:07:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.565<-17371 Statuses=0008 0009 07:07:57 Msec=2250 True Az=112.995 Ze=-80.565 Az status=0008 Ze status=0009 07:07:57 Check angles 07:07:57 SkyScan query 07:07:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 07:07:57 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 07:07:58 Check angles 07:07:58 SkyScan query 07:07:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.175<-14545 Statuses=0008 0009 07:07:58 Msec=3750 True Az=112.995 Ze=-38.175 Az status=0008 Ze status=0009 07:07:58 Check angles 07:07:58 SkyScan query 07:07:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.25<-13150 Statuses=0008 0009 07:07:59 Msec=4500 True Az=112.995 Ze=-17.25 Az status=0008 Ze status=0009 07:07:59 Check angles 07:07:59 SkyScan query 07:08:00 SkyScan query done: ret=0 az=113.01<-7534 ze=4.17<-11722 Statuses=0008 0009 07:08:00 Msec=5250 True Az=113.01 Ze=4.17 Az status=0008 Ze status=0009 07:08:00 Check angles 07:08:00 SkyScan query 07:08:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:08:01 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:08:01 Message to Master queued w/err=0: serial=115864 error=0 07:08:06 Received message from Master: op=Filter serial=115865 07:08:06 Color wheel filter change from 0 to 0 07:08:06 FLIGetFilterPos err=0 currentPosition=0 07:08:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:06 Filter is already there-color wheel unchanged 07:08:06 Received message from Master: op=Shutter serial=115866 07:08:06 Shutter LASER close 07:08:06 Received message from Camera: op=State serial=115868 07:08:06 GetSingleValue result=40 Value=cccccccc 07:08:06 SkyScan query 07:08:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:08:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:06 Parameters OK 07:08:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:06 Set A/D data flow result=40 07:08:06 Set A/D channel type result=40 07:08:06 Set A/D encoding result=40 07:08:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:06 Set channel filter=0.000000e+000 result=40 07:08:06 Config A/D Result=40 07:08:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:06 Get A/D filter: -9.255963e+061 result=40 07:08:06 Get A/D value=-858993460 result=40 07:08:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:06 Parameters OK 07:08:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:06 Set A/D data flow result=40 07:08:06 Set A/D channel type result=40 07:08:06 Set A/D encoding result=40 07:08:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:06 Set channel filter=0.000000e+000 result=40 07:08:06 Config A/D Result=40 07:08:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:06 Get A/D filter: -9.255963e+061 result=40 07:08:06 Get A/D value=-858993460 result=40 07:08:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:06 Aux= 07:08:06 Message to Camera, serial 115868 queued 07:08:43 Received message from Master: op=PointingHead serial=115881 07:08:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:08:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:08:44 Point started: ret=0 07:08:44 point_skyscan result=0 07:08:44 Check angles 07:08:44 SkyScan query 07:08:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:08:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:08:45 Message to Master queued w/err=0: serial=115881 error=0 07:08:50 Received message from Master: op=Filter serial=115882 07:08:50 Color wheel filter change from 0 to 0 07:08:50 FLIGetFilterPos err=0 currentPosition=0 07:08:50 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:50 Filter is already there-color wheel unchanged 07:08:50 Received message from Master: op=Shutter serial=115883 07:08:50 Shutter LASER close 07:08:50 Received message from Camera: op=State serial=115885 07:08:50 GetSingleValue result=40 Value=cccccccc 07:08:50 SkyScan query 07:08:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:08:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:51 Parameters OK 07:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:51 Set A/D data flow result=40 07:08:51 Set A/D channel type result=40 07:08:51 Set A/D encoding result=40 07:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:51 Set channel filter=0.000000e+000 result=40 07:08:51 Config A/D Result=40 07:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:51 Get A/D filter: -9.255963e+061 result=40 07:08:51 Get A/D value=-858993460 result=40 07:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:51 Parameters OK 07:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:51 Set A/D data flow result=40 07:08:51 Set A/D channel type result=40 07:08:51 Set A/D encoding result=40 07:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:51 Set channel filter=0.000000e+000 result=40 07:08:51 Config A/D Result=40 07:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:51 Get A/D filter: -9.255963e+061 result=40 07:08:51 Get A/D value=-858993460 result=40 07:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:51 Aux= 07:08:51 Message to Camera, serial 115885 queued 07:09:28 Received message from Master: op=PointingHead serial=115898 07:09:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:09:28 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:09:28 Point started: ret=0 07:09:28 point_skyscan result=0 07:09:29 Check angles 07:09:29 SkyScan query 07:09:29 SkyScan query done: ret=0 az=135.795<-9053 ze=-6.51<-12434 Statuses=0009 0008 07:09:29 Msec=0 True Az=135.795 Ze=-6.51 Az status=0009 Ze status=0008 07:09:29 Check angles 07:09:29 SkyScan query 07:09:30 SkyScan query done: ret=0 az=153.285<-10219 ze=-6.495<-12433 Statuses=0009 0008 07:09:30 Msec=750 True Az=153.285 Ze=-6.495 Az status=0009 Ze status=0008 07:09:30 Check angles 07:09:30 SkyScan query 07:09:31 SkyScan query done: ret=0 az=170.835<-11389 ze=-6.495<-12433 Statuses=0009 0008 07:09:31 Msec=1500 True Az=170.835 Ze=-6.495 Az status=0009 Ze status=0008 07:09:31 Check angles 07:09:31 SkyScan query 07:09:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:09:32 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:09:32 Message to Master queued w/err=0: serial=115898 error=0 07:09:37 Received message from Master: op=Filter serial=115899 07:09:37 Color wheel filter change from 0 to 0 07:09:37 FLIGetFilterPos err=0 currentPosition=0 07:09:37 FLIGetStepsRemaining err=0 RemainingSteps=0 07:09:37 Filter is already there-color wheel unchanged 07:09:37 Received message from Master: op=Shutter serial=115900 07:09:37 Shutter LASER close 07:09:37 Received message from Camera: op=State serial=115902 07:09:37 GetSingleValue result=40 Value=cccccccc 07:09:37 SkyScan query 07:09:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:09:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:37 Parameters OK 07:09:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:37 Set A/D data flow result=40 07:09:37 Set A/D channel type result=40 07:09:37 Set A/D encoding result=40 07:09:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:37 Set channel filter=0.000000e+000 result=40 07:09:37 Config A/D Result=40 07:09:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:37 Get A/D filter: -9.255963e+061 result=40 07:09:37 Get A/D value=-858993460 result=40 07:09:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:37 Parameters OK 07:09:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:37 Set A/D data flow result=40 07:09:37 Set A/D channel type result=40 07:09:37 Set A/D encoding result=40 07:09:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:37 Set channel filter=0.000000e+000 result=40 07:09:37 Config A/D Result=40 07:09:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:37 Get A/D filter: -9.255963e+061 result=40 07:09:37 Get A/D value=-858993460 result=40 07:09:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:09:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:09:37 Aux= 07:09:37 Message to Camera, serial 115902 queued 07:10:14 Received message from Master: op=PointingHead serial=115915 07:10:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:10:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:10:15 Point started: ret=0 07:10:15 point_skyscan result=0 07:10:15 Check angles 07:10:15 SkyScan query 07:10:16 SkyScan query done: ret=0 az=152.73<-10182 ze=6.51<-11566 Statuses=0009 0008 07:10:16 Msec=0 True Az=152.73 Ze=6.51 Az status=0009 Ze status=0008 07:10:16 Check angles 07:10:16 SkyScan query 07:10:17 SkyScan query done: ret=0 az=134.88<-8992 ze=6.495<-11567 Statuses=0009 0008 07:10:17 Msec=750 True Az=134.88 Ze=6.495 Az status=0009 Ze status=0008 07:10:17 Check angles 07:10:17 SkyScan query 07:10:17 SkyScan query done: ret=0 az=116.97<-7798 ze=6.495<-11567 Statuses=0009 0008 07:10:17 Msec=1500 True Az=116.97 Ze=6.495 Az status=0009 Ze status=0008 07:10:18 Check angles 07:10:18 SkyScan query 07:10:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:10:18 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:10:18 Message to Master queued w/err=0: serial=115915 error=0 07:10:23 Received message from Master: op=Filter serial=115916 07:10:23 Color wheel filter change from 0 to 0 07:10:23 FLIGetFilterPos err=0 currentPosition=0 07:10:23 FLIGetStepsRemaining err=0 RemainingSteps=0 07:10:23 Filter is already there-color wheel unchanged 07:10:23 Received message from Master: op=Shutter serial=115917 07:10:23 Shutter LASER close 07:10:23 Received message from Camera: op=State serial=115919 07:10:23 GetSingleValue result=40 Value=cccccccc 07:10:23 SkyScan query 07:10:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:10:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:24 Parameters OK 07:10:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:24 Set A/D data flow result=40 07:10:24 Set A/D channel type result=40 07:10:24 Set A/D encoding result=40 07:10:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:24 Set channel filter=0.000000e+000 result=40 07:10:24 Config A/D Result=40 07:10:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:24 Get A/D filter: -9.255963e+061 result=40 07:10:24 Get A/D value=-858993460 result=40 07:10:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:24 Parameters OK 07:10:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:24 Set A/D data flow result=40 07:10:24 Set A/D channel type result=40 07:10:24 Set A/D encoding result=40 07:10:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:24 Set channel filter=0.000000e+000 result=40 07:10:24 Config A/D Result=40 07:10:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:24 Get A/D filter: -9.255963e+061 result=40 07:10:24 Get A/D value=-858993460 result=40 07:10:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:10:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:10:24 Aux= 07:10:24 Message to Camera, serial 115919 queued 07:11:01 Received message from Master: op=PointingHead serial=115932 07:11:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:11:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:11:01 Point started: ret=0 07:11:01 point_skyscan result=0 07:11:02 Check angles 07:11:02 SkyScan query 07:11:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 07:11:02 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 07:11:03 Check angles 07:11:03 SkyScan query 07:11:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.235<-14949 Statuses=0008 0009 07:11:03 Msec=750 True Az=112.995 Ze=-44.235 Az status=0008 Ze status=0009 07:11:03 Check angles 07:11:03 SkyScan query 07:11:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.145<-16343 Statuses=0008 0009 07:11:04 Msec=1500 True Az=112.995 Ze=-65.145 Az status=0008 Ze status=0009 07:11:04 Check angles 07:11:04 SkyScan query 07:11:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.115<-17741 Statuses=0008 0009 07:11:05 Msec=2250 True Az=112.995 Ze=-86.115 Az status=0008 Ze status=0009 07:11:05 Check angles 07:11:05 SkyScan query 07:11:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.04<-19136 Statuses=0008 0009 07:11:05 Msec=3000 True Az=112.995 Ze=-107.04 Az status=0008 Ze status=0009 07:11:06 Check angles 07:11:06 SkyScan query 07:11:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.995<-20533 Statuses=0008 0009 07:11:06 Msec=3750 True Az=112.995 Ze=-127.995 Az status=0008 Ze status=0009 07:11:06 Check angles 07:11:06 SkyScan query 07:11:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.935<-21929 Statuses=0008 0009 07:11:07 Msec=4500 True Az=112.995 Ze=-148.935 Az status=0008 Ze status=0009 07:11:07 Check angles 07:11:07 SkyScan query 07:11:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.89<-23326 Statuses=0008 0009 07:11:08 Msec=5250 True Az=112.995 Ze=-169.89 Az status=0008 Ze status=0009 07:11:08 Check angles 07:11:08 SkyScan query 07:11:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:11:08 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:11:08 Message to Master queued w/err=0: serial=115932 error=0 07:11:13 Received message from Master: op=Filter serial=115933 07:11:13 Color wheel filter change from 0 to 0 07:11:13 FLIGetFilterPos err=0 currentPosition=0 07:11:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:11:13 Filter is already there-color wheel unchanged 07:11:14 Received message from Master: op=Shutter serial=115934 07:11:14 Shutter LASER open 07:11:14 Received message from Camera: op=State serial=115936 07:11:14 GetSingleValue result=40 Value=cccccccc 07:11:14 SkyScan query 07:11:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:11:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:14 Parameters OK 07:11:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:14 Set A/D data flow result=40 07:11:14 Set A/D channel type result=40 07:11:14 Set A/D encoding result=40 07:11:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:14 Set channel filter=0.000000e+000 result=40 07:11:14 Config A/D Result=40 07:11:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:14 Get A/D filter: -9.255963e+061 result=40 07:11:14 Get A/D value=-858993460 result=40 07:11:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:14 Parameters OK 07:11:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:14 Set A/D data flow result=40 07:11:14 Set A/D channel type result=40 07:11:14 Set A/D encoding result=40 07:11:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:14 Set channel filter=0.000000e+000 result=40 07:11:14 Config A/D Result=40 07:11:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:14 Get A/D filter: -9.255963e+061 result=40 07:11:14 Get A/D value=-858993460 result=40 07:11:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:11:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:11:14 Aux= 07:11:14 Message to Camera, serial 115936 queued 07:11:23 Received message from Master: op=Shutter serial=115946 07:11:23 Shutter LASER close 07:11:23 Received message from Master: op=PointingHead serial=115950 07:11:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:11:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:11:24 Point started: ret=0 07:11:24 point_skyscan result=0 07:11:24 Check angles 07:11:24 SkyScan query 07:11:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.535<-21569 Statuses=0008 0009 07:11:25 Msec=0 True Az=112.995 Ze=-143.535 Az status=0008 Ze status=0009 07:11:25 Check angles 07:11:25 SkyScan query 07:11:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.595<-20173 Statuses=0008 0009 07:11:26 Msec=750 True Az=112.995 Ze=-122.595 Az status=0008 Ze status=0009 07:11:26 Check angles 07:11:26 SkyScan query 07:11:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.085<-18739 Statuses=0008 0009 07:11:26 Msec=1500 True Az=112.995 Ze=-101.085 Az status=0008 Ze status=0009 07:11:27 Check angles 07:11:27 SkyScan query 07:11:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 07:11:27 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 07:11:27 Check angles 07:11:27 SkyScan query 07:11:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.28<-15952 Statuses=0008 0009 07:11:28 Msec=3000 True Az=112.995 Ze=-59.28 Az status=0008 Ze status=0009 07:11:28 Check angles 07:11:28 SkyScan query 07:11:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.8<-14520 Statuses=0008 0009 07:11:29 Msec=3750 True Az=112.995 Ze=-37.8 Az status=0008 Ze status=0009 07:11:29 Check angles 07:11:29 SkyScan query 07:11:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.875<-13125 Statuses=0008 0009 07:11:29 Msec=4500 True Az=112.995 Ze=-16.875 Az status=0008 Ze status=0009 07:11:30 Check angles 07:11:30 SkyScan query 07:11:30 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 07:11:30 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 07:11:30 Check angles 07:11:30 SkyScan query 07:11:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:11:31 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:11:31 Message to Master queued w/err=0: serial=115950 error=0 07:11:36 Received message from Master: op=Filter serial=115951 07:11:36 Color wheel filter change from 0 to 0 07:11:36 FLIGetFilterPos err=0 currentPosition=0 07:11:36 FLIGetStepsRemaining err=0 RemainingSteps=0 07:11:36 Filter is already there-color wheel unchanged 07:11:36 Received message from Master: op=Shutter serial=115952 07:11:36 Shutter LASER close 07:11:36 Received message from Camera: op=State serial=115954 07:11:36 GetSingleValue result=40 Value=cccccccc 07:11:36 SkyScan query 07:11:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:11:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:37 Parameters OK 07:11:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:37 Set A/D data flow result=40 07:11:37 Set A/D channel type result=40 07:11:37 Set A/D encoding result=40 07:11:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:37 Set channel filter=0.000000e+000 result=40 07:11:37 Config A/D Result=40 07:11:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:37 Get A/D filter: -9.255963e+061 result=40 07:11:37 Get A/D value=-858993460 result=40 07:11:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:37 Parameters OK 07:11:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:37 Set A/D data flow result=40 07:11:37 Set A/D channel type result=40 07:11:37 Set A/D encoding result=40 07:11:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:37 Set channel filter=0.000000e+000 result=40 07:11:37 Config A/D Result=40 07:11:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:37 Get A/D filter: -9.255963e+061 result=40 07:11:37 Get A/D value=-858993460 result=40 07:11:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:11:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:11:37 Aux= 07:11:37 Message to Camera, serial 115954 queued 07:12:14 Received message from Master: op=PointingHead serial=115967 07:12:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:12:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:12:14 Point started: ret=0 07:12:14 point_skyscan result=0 07:12:15 Check angles 07:12:15 SkyScan query 07:12:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:12:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:12:15 Message to Master queued w/err=0: serial=115967 error=0 07:12:20 Received message from Master: op=Filter serial=115968 07:12:20 Color wheel filter change from 0 to 0 07:12:20 FLIGetFilterPos err=0 currentPosition=0 07:12:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:20 Filter is already there-color wheel unchanged 07:12:20 Received message from Master: op=Shutter serial=115969 07:12:20 Shutter LASER close 07:12:21 Received message from Camera: op=State serial=115971 07:12:21 GetSingleValue result=40 Value=cccccccc 07:12:21 SkyScan query 07:12:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:12:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:21 Parameters OK 07:12:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:21 Set A/D data flow result=40 07:12:21 Set A/D channel type result=40 07:12:21 Set A/D encoding result=40 07:12:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:21 Set channel filter=0.000000e+000 result=40 07:12:21 Config A/D Result=40 07:12:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:21 Get A/D filter: -9.255963e+061 result=40 07:12:21 Get A/D value=-858993460 result=40 07:12:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:21 Parameters OK 07:12:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:21 Set A/D data flow result=40 07:12:21 Set A/D channel type result=40 07:12:21 Set A/D encoding result=40 07:12:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:21 Set channel filter=0.000000e+000 result=40 07:12:21 Config A/D Result=40 07:12:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:21 Get A/D filter: -9.255963e+061 result=40 07:12:21 Get A/D value=-858993460 result=40 07:12:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:21 Aux= 07:12:21 Message to Camera, serial 115971 queued 07:12:58 Received message from Master: op=PointingHead serial=115984 07:12:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:12:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:12:58 Point started: ret=0 07:12:58 point_skyscan result=0 07:12:59 Check angles 07:12:59 SkyScan query 07:13:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:13:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:13:00 Message to Master queued w/err=0: serial=115984 error=0 07:13:05 Received message from Master: op=Filter serial=115985 07:13:05 Color wheel filter change from 0 to 0 07:13:05 FLIGetFilterPos err=0 currentPosition=0 07:13:05 FLIGetStepsRemaining err=0 RemainingSteps=0 07:13:05 Filter is already there-color wheel unchanged 07:13:05 Received message from Master: op=Shutter serial=115986 07:13:05 Shutter LASER close 07:13:05 Received message from Camera: op=State serial=115988 07:13:05 GetSingleValue result=40 Value=cccccccc 07:13:05 SkyScan query 07:13:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:13:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:05 Parameters OK 07:13:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:05 Set A/D data flow result=40 07:13:05 Set A/D channel type result=40 07:13:05 Set A/D encoding result=40 07:13:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:05 Set channel filter=0.000000e+000 result=40 07:13:05 Config A/D Result=40 07:13:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:05 Get A/D filter: -9.255963e+061 result=40 07:13:05 Get A/D value=-858993460 result=40 07:13:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:05 Parameters OK 07:13:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:05 Set A/D data flow result=40 07:13:05 Set A/D channel type result=40 07:13:05 Set A/D encoding result=40 07:13:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:05 Set channel filter=0.000000e+000 result=40 07:13:05 Config A/D Result=40 07:13:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:05 Get A/D filter: -9.255963e+061 result=40 07:13:05 Get A/D value=-858993460 result=40 07:13:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:13:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:13:05 Aux= 07:13:05 Message to Camera, serial 115988 queued 07:13:42 Received message from Master: op=PointingHead serial=116001 07:13:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:13:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:13:43 Point started: ret=0 07:13:43 point_skyscan result=0 07:13:43 Check angles 07:13:43 SkyScan query 07:13:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:13:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:13:44 Message to Master queued w/err=0: serial=116001 error=0 07:13:49 Received message from Master: op=Filter serial=116002 07:13:49 Color wheel filter change from 0 to 0 07:13:49 FLIGetFilterPos err=0 currentPosition=0 07:13:49 FLIGetStepsRemaining err=0 RemainingSteps=0 07:13:49 Filter is already there-color wheel unchanged 07:13:49 Received message from Master: op=Shutter serial=116003 07:13:49 Shutter LASER close 07:13:49 Received message from Camera: op=State serial=116005 07:13:49 GetSingleValue result=40 Value=cccccccc 07:13:49 SkyScan query 07:13:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:13:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:50 Parameters OK 07:13:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:50 Set A/D data flow result=40 07:13:50 Set A/D channel type result=40 07:13:50 Set A/D encoding result=40 07:13:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:50 Set channel filter=0.000000e+000 result=40 07:13:50 Config A/D Result=40 07:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:50 Get A/D filter: -9.255963e+061 result=40 07:13:50 Get A/D value=-858993460 result=40 07:13:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:50 Parameters OK 07:13:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:50 Set A/D data flow result=40 07:13:50 Set A/D channel type result=40 07:13:50 Set A/D encoding result=40 07:13:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:50 Set channel filter=0.000000e+000 result=40 07:13:50 Config A/D Result=40 07:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:50 Get A/D filter: -9.255963e+061 result=40 07:13:50 Get A/D value=-858993460 result=40 07:13:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:13:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:13:50 Aux= 07:13:50 Message to Camera, serial 116005 queued 07:14:27 Received message from Master: op=PointingHead serial=116018 07:14:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:14:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:14:27 Point started: ret=0 07:14:27 point_skyscan result=0 07:14:28 Check angles 07:14:28 SkyScan query 07:14:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.58<-13572 Statuses=0008 0009 07:14:28 Msec=0 True Az=112.995 Ze=-23.58 Az status=0008 Ze status=0009 07:14:28 Check angles 07:14:28 SkyScan query 07:14:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 [UTC 2019-3-5 07:14:29] 07:14:29 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 07:14:29 Check angles 07:14:29 SkyScan query 07:14:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 07:14:30 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 07:14:30 Check angles 07:14:30 SkyScan query 07:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.43<-17762 Statuses=0008 0009 07:14:31 Msec=2250 True Az=112.995 Ze=-86.43 Az status=0008 Ze status=0009 07:14:31 Check angles 07:14:31 SkyScan query 07:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.385<-19159 Statuses=0008 0009 07:14:31 Msec=3000 True Az=112.995 Ze=-107.385 Az status=0008 Ze status=0009 07:14:31 Check angles 07:14:31 SkyScan query 07:14:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.31<-20554 Statuses=0008 0009 07:14:32 Msec=3750 True Az=112.995 Ze=-128.31 Az status=0008 Ze status=0009 07:14:32 Check angles 07:14:32 SkyScan query 07:14:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.28<-21952 Statuses=0008 0009 07:14:33 Msec=4500 True Az=112.995 Ze=-149.28 Az status=0008 Ze status=0009 07:14:33 Check angles 07:14:33 SkyScan query 07:14:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.22<-23348 Statuses=0008 0009 07:14:34 Msec=5250 True Az=112.995 Ze=-170.22 Az status=0008 Ze status=0009 07:14:34 Check angles 07:14:34 SkyScan query 07:14:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:14:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:14:34 Message to Master queued w/err=0: serial=116018 error=0 07:14:39 Received message from Master: op=Filter serial=116019 07:14:39 Color wheel filter change from 0 to 0 07:14:39 FLIGetFilterPos err=0 currentPosition=0 07:14:39 FLIGetStepsRemaining err=0 RemainingSteps=0 07:14:39 Filter is already there-color wheel unchanged 07:14:39 Received message from Master: op=Shutter serial=116020 07:14:39 Shutter LASER open 07:14:40 Received message from Camera: op=State serial=116022 07:14:40 GetSingleValue result=40 Value=cccccccc 07:14:40 SkyScan query 07:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:14:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:40 Parameters OK 07:14:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:40 Set A/D data flow result=40 07:14:40 Set A/D channel type result=40 07:14:40 Set A/D encoding result=40 07:14:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:40 Set channel filter=0.000000e+000 result=40 07:14:40 Config A/D Result=40 07:14:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:40 Get A/D filter: -9.255963e+061 result=40 07:14:40 Get A/D value=-858993460 result=40 07:14:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:40 Parameters OK 07:14:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:40 Set A/D data flow result=40 07:14:40 Set A/D channel type result=40 07:14:40 Set A/D encoding result=40 07:14:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:40 Set channel filter=0.000000e+000 result=40 07:14:40 Config A/D Result=40 07:14:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:40 Get A/D filter: -9.255963e+061 result=40 07:14:40 Get A/D value=-858993460 result=40 07:14:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:14:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:14:40 Aux= 07:14:40 Message to Camera, serial 116022 queued 07:14:49 Received message from Master: op=Shutter serial=116032 07:14:49 Shutter LASER close 07:14:49 Received message from Master: op=PointingHead serial=116036 07:14:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:14:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:14:50 Point started: ret=0 07:14:50 point_skyscan result=0 07:14:50 Check angles 07:14:50 SkyScan query 07:14:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 07:14:51 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 07:14:51 Check angles 07:14:51 SkyScan query 07:14:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 07:14:52 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 07:14:52 Check angles 07:14:52 SkyScan query 07:14:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.19<-18746 Statuses=0008 0009 07:14:52 Msec=1500 True Az=112.995 Ze=-101.19 Az status=0008 Ze status=0009 07:14:53 Check angles 07:14:53 SkyScan query 07:14:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.295<-17353 Statuses=0008 0009 07:14:53 Msec=2250 True Az=112.995 Ze=-80.295 Az status=0008 Ze status=0009 07:14:53 Check angles 07:14:53 SkyScan query 07:14:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.355<-15957 Statuses=0008 0009 07:14:54 Msec=3000 True Az=112.995 Ze=-59.355 Az status=0008 Ze status=0009 07:14:54 Check angles 07:14:54 SkyScan query 07:14:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.37<-14558 Statuses=0008 0009 07:14:55 Msec=3750 True Az=112.995 Ze=-38.37 Az status=0008 Ze status=0009 07:14:55 Check angles 07:14:55 SkyScan query 07:14:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.445<-13163 Statuses=0008 0009 07:14:55 Msec=4500 True Az=112.995 Ze=-17.445 Az status=0008 Ze status=0009 07:14:56 Check angles 07:14:56 SkyScan query 07:14:56 SkyScan query done: ret=0 az=112.995<-7533 ze=3.99<-11734 Statuses=0008 0009 07:14:56 Msec=5250 True Az=112.995 Ze=3.99 Az status=0008 Ze status=0009 07:14:56 Check angles 07:14:56 SkyScan query 07:14:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:14:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:14:57 Message to Master queued w/err=0: serial=116036 error=0 07:15:02 Received message from Master: op=Filter serial=116037 07:15:02 Color wheel filter change from 0 to 0 07:15:02 FLIGetFilterPos err=0 currentPosition=0 07:15:02 FLIGetStepsRemaining err=0 RemainingSteps=0 07:15:02 Filter is already there-color wheel unchanged 07:15:02 Received message from Master: op=Shutter serial=116038 07:15:02 Shutter LASER close 07:15:02 Received message from Camera: op=State serial=116040 07:15:02 GetSingleValue result=40 Value=cccccccc 07:15:02 SkyScan query 07:15:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:15:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:03 Parameters OK 07:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:03 Set A/D data flow result=40 07:15:03 Set A/D channel type result=40 07:15:03 Set A/D encoding result=40 07:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:03 Set channel filter=0.000000e+000 result=40 07:15:03 Config A/D Result=40 07:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:03 Get A/D filter: -9.255963e+061 result=40 07:15:03 Get A/D value=-858993460 result=40 07:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:03 Parameters OK 07:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:03 Set A/D data flow result=40 07:15:03 Set A/D channel type result=40 07:15:03 Set A/D encoding result=40 07:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:03 Set channel filter=0.000000e+000 result=40 07:15:03 Config A/D Result=40 07:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:03 Get A/D filter: -9.255963e+061 result=40 07:15:03 Get A/D value=-858993460 result=40 07:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:15:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:15:03 Aux= 07:15:03 Message to Camera, serial 116040 queued 07:15:40 Received message from Master: op=PointingHead serial=116053 07:15:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:15:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:15:40 Point started: ret=0 07:15:40 point_skyscan result=0 07:15:41 Check angles 07:15:41 SkyScan query 07:15:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:15:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:15:41 Message to Master queued w/err=0: serial=116053 error=0 07:15:46 Received message from Master: op=Filter serial=116054 07:15:46 Color wheel filter change from 0 to 0 07:15:46 FLIGetFilterPos err=0 currentPosition=0 07:15:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:15:46 Filter is already there-color wheel unchanged 07:15:47 Received message from Master: op=Shutter serial=116055 07:15:47 Shutter LASER close 07:15:47 Received message from Camera: op=State serial=116057 07:15:47 GetSingleValue result=40 Value=cccccccc 07:15:47 SkyScan query 07:15:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:15:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:47 Parameters OK 07:15:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:47 Set A/D data flow result=40 07:15:47 Set A/D channel type result=40 07:15:47 Set A/D encoding result=40 07:15:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:47 Set channel filter=0.000000e+000 result=40 07:15:47 Config A/D Result=40 07:15:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:47 Get A/D filter: -9.255963e+061 result=40 07:15:47 Get A/D value=-858993460 result=40 07:15:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:47 Parameters OK 07:15:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:47 Set A/D data flow result=40 07:15:47 Set A/D channel type result=40 07:15:47 Set A/D encoding result=40 07:15:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:47 Set channel filter=0.000000e+000 result=40 07:15:47 Config A/D Result=40 07:15:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:47 Get A/D filter: -9.255963e+061 result=40 07:15:47 Get A/D value=-858993460 result=40 07:15:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:15:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:15:47 Aux= 07:15:47 Message to Camera, serial 116057 queued 07:16:24 Received message from Master: op=PointingHead serial=116070 07:16:24 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:16:24 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:16:24 Point started: ret=0 07:16:24 point_skyscan result=0 07:16:25 Check angles 07:16:25 SkyScan query 07:16:26 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 07:16:26 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 07:16:26 Check angles 07:16:26 SkyScan query 07:16:26 SkyScan query done: ret=0 az=153.915<-10261 ze=-6.495<-12433 Statuses=0009 0008 07:16:26 Msec=750 True Az=153.915 Ze=-6.495 Az status=0009 Ze status=0008 07:16:27 Check angles 07:16:27 SkyScan query 07:16:27 SkyScan query done: ret=0 az=171.315<-11421 ze=-6.495<-12433 Statuses=0009 0008 07:16:27 Msec=1500 True Az=171.315 Ze=-6.495 Az status=0009 Ze status=0008 07:16:27 Check angles 07:16:27 SkyScan query 07:16:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:16:28 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:16:28 Message to Master queued w/err=0: serial=116070 error=0 07:16:33 Received message from Master: op=Filter serial=116071 07:16:33 Color wheel filter change from 0 to 0 07:16:33 FLIGetFilterPos err=0 currentPosition=0 07:16:33 FLIGetStepsRemaining err=0 RemainingSteps=0 07:16:33 Filter is already there-color wheel unchanged 07:16:33 Received message from Master: op=Shutter serial=116072 07:16:33 Shutter LASER close 07:16:33 Received message from Camera: op=State serial=116074 07:16:33 GetSingleValue result=40 Value=cccccccc 07:16:33 SkyScan query 07:16:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:16:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:34 Parameters OK 07:16:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:34 Set A/D data flow result=40 07:16:34 Set A/D channel type result=40 07:16:34 Set A/D encoding result=40 07:16:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:34 Set channel filter=0.000000e+000 result=40 07:16:34 Config A/D Result=40 07:16:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:34 Get A/D filter: -9.255963e+061 result=40 07:16:34 Get A/D value=-858993460 result=40 07:16:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:34 Parameters OK 07:16:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:34 Set A/D data flow result=40 07:16:34 Set A/D channel type result=40 07:16:34 Set A/D encoding result=40 07:16:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:34 Set channel filter=0.000000e+000 result=40 07:16:34 Config A/D Result=40 07:16:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:34 Get A/D filter: -9.255963e+061 result=40 07:16:34 Get A/D value=-858993460 result=40 07:16:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:16:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:16:34 Aux= 07:16:34 Message to Camera, serial 116074 queued 07:17:10 Received message from Master: op=PointingHead serial=116087 07:17:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:17:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:17:11 Point started: ret=0 07:17:11 point_skyscan result=0 07:17:12 Check angles 07:17:12 SkyScan query 07:17:12 SkyScan query done: ret=0 az=152.97<-10198 ze=6.51<-11566 Statuses=0009 0008 07:17:12 Msec=0 True Az=152.97 Ze=6.51 Az status=0009 Ze status=0008 07:17:12 Check angles 07:17:12 SkyScan query 07:17:13 SkyScan query done: ret=0 az=135.525<-9035 ze=6.495<-11567 Statuses=0009 0008 07:17:13 Msec=750 True Az=135.525 Ze=6.495 Az status=0009 Ze status=0008 07:17:13 Check angles 07:17:13 SkyScan query 07:17:14 SkyScan query done: ret=0 az=117.54<-7836 ze=6.495<-11567 Statuses=0009 0008 07:17:14 Msec=1500 True Az=117.54 Ze=6.495 Az status=0009 Ze status=0008 07:17:14 Check angles 07:17:14 SkyScan query 07:17:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:17:14 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:17:14 Message to Master queued w/err=0: serial=116087 error=0 07:17:19 Received message from Master: op=Filter serial=116088 07:17:19 Color wheel filter change from 0 to 0 07:17:19 FLIGetFilterPos err=0 currentPosition=0 07:17:19 FLIGetStepsRemaining err=0 RemainingSteps=0 07:17:19 Filter is already there-color wheel unchanged 07:17:20 Received message from Master: op=Shutter serial=116089 07:17:20 Shutter LASER close 07:17:20 Received message from Camera: op=State serial=116091 07:17:20 GetSingleValue result=40 Value=cccccccc 07:17:20 SkyScan query 07:17:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:17:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:20 Parameters OK 07:17:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:20 Set A/D data flow result=40 07:17:20 Set A/D channel type result=40 07:17:20 Set A/D encoding result=40 07:17:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:20 Set channel filter=0.000000e+000 result=40 07:17:20 Config A/D Result=40 07:17:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:20 Get A/D filter: -9.255963e+061 result=40 07:17:20 Get A/D value=-858993460 result=40 07:17:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:20 Parameters OK 07:17:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:20 Set A/D data flow result=40 07:17:20 Set A/D channel type result=40 07:17:20 Set A/D encoding result=40 07:17:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:20 Set channel filter=0.000000e+000 result=40 07:17:20 Config A/D Result=40 07:17:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:20 Get A/D filter: -9.255963e+061 result=40 07:17:20 Get A/D value=-858993460 result=40 07:17:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:17:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:17:20 Aux= 07:17:20 Message to Camera, serial 116091 queued 07:17:57 Received message from Master: op=PointingHead serial=116104 07:17:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:17:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:17:57 Point started: ret=0 07:17:57 point_skyscan result=0 07:17:58 Check angles 07:17:58 SkyScan query 07:17:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.805<-13587 Statuses=0008 0009 07:17:59 Msec=0 True Az=112.995 Ze=-23.805 Az status=0008 Ze status=0009 07:17:59 Check angles 07:17:59 SkyScan query 07:17:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 07:17:59 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 07:18:00 Check angles 07:18:00 SkyScan query 07:18:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 07:18:00 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 07:18:00 Check angles 07:18:00 SkyScan query 07:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.12<-17808 Statuses=0008 0009 07:18:01 Msec=2250 True Az=112.995 Ze=-87.12 Az status=0008 Ze status=0009 07:18:01 Check angles 07:18:01 SkyScan query 07:18:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.525<-19235 Statuses=0008 0009 07:18:02 Msec=3000 True Az=112.995 Ze=-108.525 Az status=0008 Ze status=0009 07:18:02 Check angles 07:18:02 SkyScan query 07:18:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.495<-20633 Statuses=0008 0009 07:18:03 Msec=3750 True Az=112.995 Ze=-129.495 Az status=0008 Ze status=0009 07:18:03 Check angles 07:18:03 SkyScan query 07:18:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.795<-22053 Statuses=0008 0009 07:18:03 Msec=4500 True Az=112.995 Ze=-150.795 Az status=0008 Ze status=0009 07:18:03 Check angles 07:18:03 SkyScan query 07:18:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.78<-23452 Statuses=0008 0009 07:18:04 Msec=5250 True Az=112.995 Ze=-171.78 Az status=0008 Ze status=0009 07:18:04 Check angles 07:18:04 SkyScan query 07:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:18:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:18:05 Message to Master queued w/err=0: serial=116104 error=0 07:18:10 Received message from Master: op=Filter serial=116105 07:18:10 Color wheel filter change from 0 to 0 07:18:10 FLIGetFilterPos err=0 currentPosition=0 07:18:10 FLIGetStepsRemaining err=0 RemainingSteps=0 07:18:10 Filter is already there-color wheel unchanged 07:18:10 Received message from Master: op=Shutter serial=116106 07:18:10 Shutter LASER open 07:18:10 Received message from Camera: op=State serial=116108 07:18:10 GetSingleValue result=40 Value=cccccccc 07:18:10 SkyScan query 07:18:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:18:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:11 Parameters OK 07:18:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:11 Set A/D data flow result=40 07:18:11 Set A/D channel type result=40 07:18:11 Set A/D encoding result=40 07:18:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:11 Set channel filter=0.000000e+000 result=40 07:18:11 Config A/D Result=40 07:18:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:11 Get A/D filter: -9.255963e+061 result=40 07:18:11 Get A/D value=-858993460 result=40 07:18:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:11 Parameters OK 07:18:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:11 Set A/D data flow result=40 07:18:11 Set A/D channel type result=40 07:18:11 Set A/D encoding result=40 07:18:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:11 Set channel filter=0.000000e+000 result=40 07:18:11 Config A/D Result=40 07:18:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:11 Get A/D filter: -9.255963e+061 result=40 07:18:11 Get A/D value=-858993460 result=40 07:18:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:18:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:18:11 Aux= 07:18:11 Message to Camera, serial 116108 queued 07:18:18 Received message from Master: op=Shutter serial=116117 07:18:18 Shutter LASER close 07:18:19 Received message from Master: op=PointingHead serial=116121 07:18:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:18:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:18:19 Point started: ret=0 07:18:19 point_skyscan result=0 07:18:20 Check angles 07:18:20 SkyScan query 07:18:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.875<-21525 Statuses=0008 0009 07:18:20 Msec=0 True Az=112.995 Ze=-142.875 Az status=0008 Ze status=0009 07:18:21 Check angles 07:18:21 SkyScan query 07:18:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.89<-20126 Statuses=0008 0009 07:18:21 Msec=750 True Az=112.995 Ze=-121.89 Az status=0008 Ze status=0009 07:18:21 Check angles 07:18:21 SkyScan query 07:18:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 07:18:22 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 07:18:22 Check angles 07:18:22 SkyScan query 07:18:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.995<-17333 Statuses=0008 0009 07:18:23 Msec=2250 True Az=112.995 Ze=-79.995 Az status=0008 Ze status=0009 07:18:23 Check angles 07:18:23 SkyScan query 07:18:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.055<-15937 Statuses=0008 0009 07:18:23 Msec=3000 True Az=112.995 Ze=-59.055 Az status=0008 Ze status=0009 07:18:24 Check angles 07:18:24 SkyScan query 07:18:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.04<-14536 Statuses=0008 0009 07:18:24 Msec=3750 True Az=112.995 Ze=-38.04 Az status=0008 Ze status=0009 07:18:24 Check angles 07:18:24 SkyScan query 07:18:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.115<-13141 Statuses=0008 0009 07:18:25 Msec=4500 True Az=112.995 Ze=-17.115 Az status=0008 Ze status=0009 07:18:25 Check angles 07:18:25 SkyScan query 07:18:26 SkyScan query done: ret=0 az=113.01<-7534 ze=4.26<-11716 Statuses=0008 0009 07:18:26 Msec=5250 True Az=113.01 Ze=4.26 Az status=0008 Ze status=0009 07:18:26 Check angles 07:18:26 SkyScan query 07:18:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:18:26 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:18:26 Message to Master queued w/err=0: serial=116121 error=0 07:18:31 Received message from Master: op=Filter serial=116122 07:18:31 Color wheel filter change from 0 to 0 07:18:31 FLIGetFilterPos err=0 currentPosition=0 07:18:31 FLIGetStepsRemaining err=0 RemainingSteps=0 07:18:31 Filter is already there-color wheel unchanged 07:18:32 Received message from Master: op=Shutter serial=116123 07:18:32 Shutter LASER close 07:18:32 Received message from Camera: op=State serial=116125 07:18:32 GetSingleValue result=40 Value=cccccccc 07:18:32 SkyScan query 07:18:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:18:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:32 Parameters OK 07:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:32 Set A/D data flow result=40 07:18:32 Set A/D channel type result=40 07:18:32 Set A/D encoding result=40 07:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:32 Set channel filter=0.000000e+000 result=40 07:18:32 Config A/D Result=40 07:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:32 Get A/D filter: -9.255963e+061 result=40 07:18:32 Get A/D value=-858993460 result=40 07:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:32 Parameters OK 07:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:32 Set A/D data flow result=40 07:18:32 Set A/D channel type result=40 07:18:32 Set A/D encoding result=40 07:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:32 Set channel filter=0.000000e+000 result=40 07:18:32 Config A/D Result=40 07:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:32 Get A/D filter: -9.255963e+061 result=40 07:18:32 Get A/D value=-858993460 result=40 07:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:18:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:18:32 Aux= 07:18:32 Message to Camera, serial 116125 queued 07:19:09 Received message from Master: op=PointingHead serial=116138 07:19:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:19:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:19:09 Point started: ret=0 07:19:09 point_skyscan result=0 07:19:10 Check angles 07:19:10 SkyScan query 07:19:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:19:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:19:11 Message to Master queued w/err=0: serial=116138 error=0 07:19:16 Received message from Master: op=Filter serial=116139 07:19:16 Color wheel filter change from 0 to 0 07:19:16 FLIGetFilterPos err=0 currentPosition=0 07:19:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:19:16 Filter is already there-color wheel unchanged 07:19:16 Received message from Master: op=Shutter serial=116140 07:19:16 Shutter LASER close 07:19:16 Received message from Camera: op=State serial=116142 07:19:16 GetSingleValue result=40 Value=cccccccc 07:19:16 SkyScan query 07:19:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:19:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:17 Parameters OK 07:19:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:17 Set A/D data flow result=40 07:19:17 Set A/D channel type result=40 07:19:17 Set A/D encoding result=40 07:19:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:17 Set channel filter=0.000000e+000 result=40 07:19:17 Config A/D Result=40 07:19:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:17 Get A/D filter: -9.255963e+061 result=40 07:19:17 Get A/D value=-858993460 result=40 07:19:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:17 Parameters OK 07:19:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:17 Set A/D data flow result=40 07:19:17 Set A/D channel type result=40 07:19:17 Set A/D encoding result=40 07:19:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:17 Set channel filter=0.000000e+000 result=40 07:19:17 Config A/D Result=40 07:19:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:17 Get A/D filter: -9.255963e+061 result=40 07:19:17 Get A/D value=-858993460 result=40 07:19:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:19:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:19:17 Aux= 07:19:17 Message to Camera, serial 116142 queued 07:19:52 Received message from Master: op=PointingHead serial=116154 07:19:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:19:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:19:53 Point started: ret=0 07:19:53 point_skyscan result=0 07:19:54 Check angles 07:19:54 SkyScan query 07:19:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:19:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:19:54 Message to Master queued w/err=0: serial=116154 error=0 07:19:59 Received message from Master: op=Filter serial=116155 07:19:59 Color wheel filter change from 0 to 0 07:19:59 FLIGetFilterPos err=0 currentPosition=0 07:19:59 FLIGetStepsRemaining err=0 RemainingSteps=0 07:19:59 Filter is already there-color wheel unchanged 07:19:59 Received message from Master: op=Shutter serial=116156 07:19:59 Shutter LASER close 07:19:59 Received message from Camera: op=State serial=116158 07:19:59 GetSingleValue result=40 Value=cccccccc 07:19:59 SkyScan query 07:20:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:20:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:00 Parameters OK 07:20:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:00 Set A/D data flow result=40 07:20:00 Set A/D channel type result=40 07:20:00 Set A/D encoding result=40 07:20:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:00 Set channel filter=0.000000e+000 result=40 07:20:00 Config A/D Result=40 07:20:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:00 Get A/D filter: -9.255963e+061 result=40 07:20:00 Get A/D value=-858993460 result=40 07:20:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:00 Parameters OK 07:20:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:00 Set A/D data flow result=40 07:20:00 Set A/D channel type result=40 07:20:00 Set A/D encoding result=40 07:20:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:00 Set channel filter=0.000000e+000 result=40 07:20:00 Config A/D Result=40 07:20:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:00 Get A/D filter: -9.255963e+061 result=40 07:20:00 Get A/D value=-858993460 result=40 07:20:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:00 Aux= 07:20:00 Message to Camera, serial 116158 queued 07:20:37 Received message from Master: op=PointingHead serial=116171 07:20:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:20:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:20:37 Point started: ret=0 07:20:37 point_skyscan result=0 07:20:38 Check angles 07:20:38 SkyScan query 07:20:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:20:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:20:38 Message to Master queued w/err=0: serial=116171 error=0 07:20:43 Received message from Master: op=Filter serial=116172 07:20:43 Color wheel filter change from 0 to 0 07:20:43 FLIGetFilterPos err=0 currentPosition=0 07:20:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:43 Filter is already there-color wheel unchanged 07:20:44 Received message from Master: op=Shutter serial=116173 07:20:44 Shutter LASER close 07:20:44 Received message from Camera: op=State serial=116175 07:20:44 GetSingleValue result=40 Value=cccccccc 07:20:44 SkyScan query 07:20:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:20:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:44 Parameters OK 07:20:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:44 Set A/D data flow result=40 07:20:44 Set A/D channel type result=40 07:20:44 Set A/D encoding result=40 07:20:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:44 Set channel filter=0.000000e+000 result=40 07:20:44 Config A/D Result=40 07:20:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:44 Get A/D filter: -9.255963e+061 result=40 07:20:44 Get A/D value=-858993460 result=40 07:20:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:44 Parameters OK 07:20:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:44 Set A/D data flow result=40 07:20:44 Set A/D channel type result=40 07:20:44 Set A/D encoding result=40 07:20:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:44 Set channel filter=0.000000e+000 result=40 07:20:44 Config A/D Result=40 07:20:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:44 Get A/D filter: -9.255963e+061 result=40 07:20:44 Get A/D value=-858993460 result=40 07:20:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:44 Aux= 07:20:44 Message to Camera, serial 116175 queued 07:21:21 Received message from Master: op=PointingHead serial=116188 07:21:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:21:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:21:21 Point started: ret=0 07:21:21 point_skyscan result=0 07:21:22 Check angles 07:21:22 SkyScan query 07:21:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 07:21:23 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 07:21:23 Check angles 07:21:23 SkyScan query 07:21:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.025<-14935 Statuses=0008 0009 07:21:24 Msec=750 True Az=112.995 Ze=-44.025 Az status=0008 Ze status=0009 07:21:24 Check angles 07:21:24 SkyScan query 07:21:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.965<-16331 Statuses=0008 0009 07:21:24 Msec=1500 True Az=112.995 Ze=-64.965 Az status=0008 Ze status=0009 07:21:24 Check angles 07:21:24 SkyScan query 07:21:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.92<-17728 Statuses=0008 0009 07:21:25 Msec=2250 True Az=112.995 Ze=-85.92 Az status=0008 Ze status=0009 07:21:25 Check angles 07:21:25 SkyScan query 07:21:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.86<-19124 Statuses=0008 0009 07:21:26 Msec=3000 True Az=112.995 Ze=-106.86 Az status=0008 Ze status=0009 07:21:26 Check angles 07:21:26 SkyScan query 07:21:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.8<-20520 Statuses=0008 0009 07:21:27 Msec=3750 True Az=112.995 Ze=-127.8 Az status=0008 Ze status=0009 07:21:27 Check angles 07:21:27 SkyScan query 07:21:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.74<-21916 Statuses=0008 0009 07:21:27 Msec=4500 True Az=112.995 Ze=-148.74 Az status=0008 Ze status=0009 07:21:27 Check angles 07:21:27 SkyScan query 07:21:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.115<-23341 Statuses=0008 0009 07:21:28 Msec=5250 True Az=112.995 Ze=-170.115 Az status=0008 Ze status=0009 07:21:28 Check angles 07:21:28 SkyScan query 07:21:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:21:29 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:21:29 Message to Master queued w/err=0: serial=116188 error=0 07:21:34 Received message from Master: op=Filter serial=116189 07:21:34 Color wheel filter change from 0 to 0 07:21:34 FLIGetFilterPos err=0 currentPosition=0 07:21:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:21:34 Filter is already there-color wheel unchanged 07:21:34 Received message from Master: op=Shutter serial=116190 07:21:34 Shutter LASER open 07:21:34 Received message from Camera: op=State serial=116192 07:21:34 GetSingleValue result=40 Value=cccccccc 07:21:34 SkyScan query 07:21:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:21:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:35 Parameters OK 07:21:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:35 Set A/D data flow result=40 07:21:35 Set A/D channel type result=40 07:21:35 Set A/D encoding result=40 07:21:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:35 Set channel filter=0.000000e+000 result=40 07:21:35 Config A/D Result=40 07:21:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:35 Get A/D filter: -9.255963e+061 result=40 07:21:35 Get A/D value=-858993460 result=40 07:21:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:35 Parameters OK 07:21:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:35 Set A/D data flow result=40 07:21:35 Set A/D channel type result=40 07:21:35 Set A/D encoding result=40 07:21:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:35 Set channel filter=0.000000e+000 result=40 07:21:35 Config A/D Result=40 07:21:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:35 Get A/D filter: -9.255963e+061 result=40 07:21:35 Get A/D value=-858993460 result=40 07:21:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:21:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:21:35 Aux= 07:21:35 Message to Camera, serial 116192 queued 07:21:43 Received message from Master: op=Shutter serial=116202 07:21:43 Shutter LASER close 07:21:44 Received message from Master: op=PointingHead serial=116206 07:21:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:21:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:21:44 Point started: ret=0 07:21:44 point_skyscan result=0 07:21:45 Check angles 07:21:45 SkyScan query 07:21:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.68<-21512 Statuses=0008 0009 07:21:45 Msec=0 True Az=112.995 Ze=-142.68 Az status=0008 Ze status=0009 07:21:46 Check angles 07:21:46 SkyScan query 07:21:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.8<-20120 Statuses=0008 0009 07:21:46 Msec=750 True Az=112.995 Ze=-121.8 Az status=0008 Ze status=0009 07:21:46 Check angles 07:21:46 SkyScan query 07:21:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.875<-18725 Statuses=0008 0009 07:21:47 Msec=1500 True Az=112.995 Ze=-100.875 Az status=0008 Ze status=0009 07:21:47 Check angles 07:21:47 SkyScan query 07:21:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.905<-17327 Statuses=0008 0009 07:21:48 Msec=2250 True Az=112.995 Ze=-79.905 Az status=0008 Ze status=0009 07:21:48 Check angles 07:21:48 SkyScan query 07:21:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.98<-15932 Statuses=0008 0009 07:21:48 Msec=3000 True Az=112.995 Ze=-58.98 Az status=0008 Ze status=0009 07:21:49 Check angles 07:21:49 SkyScan query 07:21:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.965<-14531 Statuses=0008 0009 07:21:49 Msec=3750 True Az=112.995 Ze=-37.965 Az status=0008 Ze status=0009 07:21:49 Check angles 07:21:49 SkyScan query 07:21:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.575<-13105 Statuses=0008 0009 07:21:50 Msec=4500 True Az=112.995 Ze=-16.575 Az status=0008 Ze status=0009 07:21:50 Check angles 07:21:50 SkyScan query 07:21:51 SkyScan query done: ret=0 az=113.01<-7534 ze=4.32<-11712 Statuses=0008 0009 07:21:51 Msec=5250 True Az=113.01 Ze=4.32 Az status=0008 Ze status=0009 07:21:51 Check angles 07:21:51 SkyScan query 07:21:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:21:51 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:21:51 Message to Master queued w/err=0: serial=116206 error=0 07:21:56 Received message from Master: op=Filter serial=116207 07:21:56 Color wheel filter change from 0 to 0 07:21:56 FLIGetFilterPos err=0 currentPosition=0 07:21:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:21:56 Filter is already there-color wheel unchanged 07:21:57 Received message from Master: op=Shutter serial=116208 07:21:57 Shutter LASER close 07:21:57 Received message from Camera: op=State serial=116210 07:21:57 GetSingleValue result=40 Value=cccccccc 07:21:57 SkyScan query 07:21:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:21:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:57 Parameters OK 07:21:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:57 Set A/D data flow result=40 07:21:57 Set A/D channel type result=40 07:21:57 Set A/D encoding result=40 07:21:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:57 Set channel filter=0.000000e+000 result=40 07:21:57 Config A/D Result=40 07:21:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:57 Get A/D filter: -9.255963e+061 result=40 07:21:57 Get A/D value=-858993460 result=40 07:21:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:57 Parameters OK 07:21:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:57 Set A/D data flow result=40 07:21:57 Set A/D channel type result=40 07:21:57 Set A/D encoding result=40 07:21:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:57 Set channel filter=0.000000e+000 result=40 07:21:57 Config A/D Result=40 07:21:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:57 Get A/D filter: -9.255963e+061 result=40 07:21:57 Get A/D value=-858993460 result=40 07:21:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:21:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:21:57 Aux= 07:21:57 Message to Camera, serial 116210 queued 07:22:34 Received message from Master: op=PointingHead serial=116223 07:22:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:22:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:22:34 Point started: ret=0 07:22:34 point_skyscan result=0 07:22:35 Check angles 07:22:35 SkyScan query 07:22:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:22:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:22:36 Message to Master queued w/err=0: serial=116223 error=0 07:22:41 Received message from Master: op=Filter serial=116224 07:22:41 Color wheel filter change from 0 to 0 07:22:41 FLIGetFilterPos err=0 currentPosition=0 07:22:41 FLIGetStepsRemaining err=0 RemainingSteps=0 07:22:41 Filter is already there-color wheel unchanged 07:22:41 Received message from Master: op=Shutter serial=116225 07:22:41 Shutter LASER close 07:22:41 Received message from Camera: op=State serial=116227 07:22:41 GetSingleValue result=40 Value=cccccccc 07:22:41 SkyScan query 07:22:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:22:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:42 Parameters OK 07:22:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:42 Set A/D data flow result=40 07:22:42 Set A/D channel type result=40 07:22:42 Set A/D encoding result=40 07:22:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:42 Set channel filter=0.000000e+000 result=40 07:22:42 Config A/D Result=40 07:22:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:42 Get A/D filter: -9.255963e+061 result=40 07:22:42 Get A/D value=-858993460 result=40 07:22:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:42 Parameters OK 07:22:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:42 Set A/D data flow result=40 07:22:42 Set A/D channel type result=40 07:22:42 Set A/D encoding result=40 07:22:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:42 Set channel filter=0.000000e+000 result=40 07:22:42 Config A/D Result=40 07:22:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:42 Get A/D filter: -9.255963e+061 result=40 07:22:42 Get A/D value=-858993460 result=40 07:22:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:22:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:22:42 Aux= 07:22:42 Message to Camera, serial 116227 queued 07:23:19 Received message from Master: op=PointingHead serial=116240 07:23:19 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:23:19 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:23:19 Point started: ret=0 07:23:19 point_skyscan result=0 07:23:20 Check angles 07:23:20 SkyScan query 07:23:20 SkyScan query done: ret=0 az=135.78<-9052 ze=-6.51<-12434 Statuses=0009 0008 07:23:20 Msec=0 True Az=135.78 Ze=-6.51 Az status=0009 Ze status=0008 07:23:20 Check angles 07:23:20 SkyScan query 07:23:21 SkyScan query done: ret=0 az=153.285<-10219 ze=-6.495<-12433 Statuses=0009 0008 07:23:21 Msec=750 True Az=153.285 Ze=-6.495 Az status=0009 Ze status=0008 07:23:21 Check angles 07:23:21 SkyScan query 07:23:22 SkyScan query done: ret=0 az=170.82<-11388 ze=-6.495<-12433 Statuses=0009 0008 07:23:22 Msec=1500 True Az=170.82 Ze=-6.495 Az status=0009 Ze status=0008 07:23:22 Check angles 07:23:22 SkyScan query 07:23:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:23:22 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:23:22 Message to Master queued w/err=0: serial=116240 error=0 07:23:27 Received message from Master: op=Filter serial=116241 07:23:27 Color wheel filter change from 0 to 0 07:23:27 FLIGetFilterPos err=0 currentPosition=0 07:23:27 FLIGetStepsRemaining err=0 RemainingSteps=0 07:23:27 Filter is already there-color wheel unchanged 07:23:28 Received message from Master: op=Shutter serial=116242 07:23:28 Shutter LASER close 07:23:28 Received message from Camera: op=State serial=116244 07:23:28 GetSingleValue result=40 Value=cccccccc 07:23:28 SkyScan query 07:23:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:23:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:28 Parameters OK 07:23:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:28 Set A/D data flow result=40 07:23:28 Set A/D channel type result=40 07:23:28 Set A/D encoding result=40 07:23:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:28 Set channel filter=0.000000e+000 result=40 07:23:28 Config A/D Result=40 07:23:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:28 Get A/D filter: -9.255963e+061 result=40 07:23:28 Get A/D value=-858993460 result=40 07:23:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:28 Parameters OK 07:23:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:28 Set A/D data flow result=40 07:23:28 Set A/D channel type result=40 07:23:28 Set A/D encoding result=40 07:23:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:28 Set channel filter=0.000000e+000 result=40 07:23:28 Config A/D Result=40 07:23:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:28 Get A/D filter: -9.255963e+061 result=40 07:23:28 Get A/D value=-858993460 result=40 07:23:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:23:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:23:28 Aux= 07:23:28 Message to Camera, serial 116244 queued [UTC 2019-3-5 07:23:50] 07:24:05 Received message from Master: op=PointingHead serial=116257 07:24:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:24:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:24:05 Point started: ret=0 07:24:05 point_skyscan result=0 07:24:06 Check angles 07:24:06 SkyScan query 07:24:07 SkyScan query done: ret=0 az=152.745<-10183 ze=6.51<-11566 Statuses=0009 0008 07:24:07 Msec=0 True Az=152.745 Ze=6.51 Az status=0009 Ze status=0008 07:24:07 Check angles 07:24:07 SkyScan query 07:24:07 SkyScan query done: ret=0 az=135.165<-9011 ze=6.495<-11567 Statuses=0009 0008 07:24:07 Msec=750 True Az=135.165 Ze=6.495 Az status=0009 Ze status=0008 07:24:08 Check angles 07:24:08 SkyScan query 07:24:08 SkyScan query done: ret=0 az=117.705<-7847 ze=6.495<-11567 Statuses=0009 0008 07:24:08 Msec=1500 True Az=117.705 Ze=6.495 Az status=0009 Ze status=0008 07:24:08 Check angles 07:24:08 SkyScan query 07:24:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:24:09 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:24:09 Message to Master queued w/err=0: serial=116257 error=0 07:24:14 Received message from Master: op=Filter serial=116258 07:24:14 Color wheel filter change from 0 to 0 07:24:14 FLIGetFilterPos err=0 currentPosition=0 07:24:14 FLIGetStepsRemaining err=0 RemainingSteps=0 07:24:14 Filter is already there-color wheel unchanged 07:24:14 Received message from Master: op=Shutter serial=116259 07:24:14 Shutter LASER close 07:24:14 Received message from Camera: op=State serial=116261 07:24:14 GetSingleValue result=40 Value=cccccccc 07:24:14 SkyScan query 07:24:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:24:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:15 Parameters OK 07:24:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:15 Set A/D data flow result=40 07:24:15 Set A/D channel type result=40 07:24:15 Set A/D encoding result=40 07:24:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:15 Set channel filter=0.000000e+000 result=40 07:24:15 Config A/D Result=40 07:24:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:15 Get A/D filter: -9.255963e+061 result=40 07:24:15 Get A/D value=-858993460 result=40 07:24:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:15 Parameters OK 07:24:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:15 Set A/D data flow result=40 07:24:15 Set A/D channel type result=40 07:24:15 Set A/D encoding result=40 07:24:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:15 Set channel filter=0.000000e+000 result=40 07:24:15 Config A/D Result=40 07:24:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:15 Get A/D filter: -9.255963e+061 result=40 07:24:15 Get A/D value=-858993460 result=40 07:24:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:24:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:24:15 Aux= 07:24:15 Message to Camera, serial 116261 queued 07:24:52 Received message from Master: op=PointingHead serial=116274 07:24:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:24:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:24:52 Point started: ret=0 07:24:52 point_skyscan result=0 07:24:53 Check angles 07:24:53 SkyScan query 07:24:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 07:24:53 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 07:24:53 Check angles 07:24:53 SkyScan query 07:24:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.115<-14941 Statuses=0008 0009 07:24:54 Msec=750 True Az=112.995 Ze=-44.115 Az status=0008 Ze status=0009 07:24:54 Check angles 07:24:54 SkyScan query 07:24:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.025<-16335 Statuses=0008 0009 07:24:55 Msec=1500 True Az=112.995 Ze=-65.025 Az status=0008 Ze status=0009 07:24:55 Check angles 07:24:55 SkyScan query 07:24:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 07:24:56 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 07:24:56 Check angles 07:24:56 SkyScan query 07:24:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.325<-19155 Statuses=0008 0009 07:24:56 Msec=3000 True Az=112.995 Ze=-107.325 Az status=0008 Ze status=0009 07:24:56 Check angles 07:24:56 SkyScan query 07:24:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.265<-20551 Statuses=0008 0009 07:24:57 Msec=3750 True Az=112.995 Ze=-128.265 Az status=0008 Ze status=0009 07:24:57 Check angles 07:24:57 SkyScan query 07:24:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.235<-21949 Statuses=0008 0009 07:24:58 Msec=4500 True Az=112.995 Ze=-149.235 Az status=0008 Ze status=0009 07:24:58 Check angles 07:24:58 SkyScan query 07:24:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.61<-23374 Statuses=0008 0009 07:24:59 Msec=5250 True Az=112.995 Ze=-170.61 Az status=0008 Ze status=0009 07:24:59 Check angles 07:24:59 SkyScan query 07:24:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:24:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:24:59 Message to Master queued w/err=0: serial=116274 error=0 07:25:04 Received message from Master: op=Filter serial=116275 07:25:04 Color wheel filter change from 0 to 0 07:25:04 FLIGetFilterPos err=0 currentPosition=0 07:25:04 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:04 Filter is already there-color wheel unchanged 07:25:04 Received message from Master: op=Shutter serial=116276 07:25:04 Shutter LASER open 07:25:05 Received message from Camera: op=State serial=116278 07:25:05 GetSingleValue result=40 Value=cccccccc 07:25:05 SkyScan query 07:25:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:25:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:05 Parameters OK 07:25:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:05 Set A/D data flow result=40 07:25:05 Set A/D channel type result=40 07:25:05 Set A/D encoding result=40 07:25:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:05 Set channel filter=0.000000e+000 result=40 07:25:05 Config A/D Result=40 07:25:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:05 Get A/D filter: -9.255963e+061 result=40 07:25:05 Get A/D value=-858993460 result=40 07:25:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:05 Parameters OK 07:25:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:05 Set A/D data flow result=40 07:25:05 Set A/D channel type result=40 07:25:05 Set A/D encoding result=40 07:25:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:05 Set channel filter=0.000000e+000 result=40 07:25:05 Config A/D Result=40 07:25:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:05 Get A/D filter: -9.255963e+061 result=40 07:25:05 Get A/D value=-858993460 result=40 07:25:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:05 Aux= 07:25:05 Message to Camera, serial 116278 queued 07:25:14 Received message from Master: op=Shutter serial=116288 07:25:14 Shutter LASER close 07:25:14 Received message from Master: op=PointingHead serial=116292 07:25:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:25:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:25:14 Point started: ret=0 07:25:14 point_skyscan result=0 07:25:15 Check angles 07:25:15 SkyScan query 07:25:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.04<-21536 Statuses=0008 0009 07:25:16 Msec=0 True Az=112.995 Ze=-143.04 Az status=0008 Ze status=0009 07:25:16 Check angles 07:25:16 SkyScan query 07:25:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 07:25:17 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 07:25:17 Check angles 07:25:17 SkyScan query 07:25:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 07:25:17 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 07:25:17 Check angles 07:25:17 SkyScan query 07:25:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 07:25:18 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 07:25:18 Check angles 07:25:18 SkyScan query 07:25:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 07:25:19 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 07:25:19 Check angles 07:25:19 SkyScan query 07:25:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.19<-14546 Statuses=0008 0009 07:25:20 Msec=3750 True Az=112.995 Ze=-38.19 Az status=0008 Ze status=0009 07:25:20 Check angles 07:25:20 SkyScan query 07:25:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 07:25:20 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 07:25:20 Check angles 07:25:20 SkyScan query 07:25:21 SkyScan query done: ret=0 az=112.995<-7533 ze=3.69<-11754 Statuses=0008 0009 07:25:21 Msec=5250 True Az=112.995 Ze=3.69 Az status=0008 Ze status=0009 07:25:21 Check angles 07:25:21 SkyScan query 07:25:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:25:22 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:25:22 Message to Master queued w/err=0: serial=116292 error=0 07:25:27 Received message from Master: op=Filter serial=116293 07:25:27 Color wheel filter change from 0 to 0 07:25:27 FLIGetFilterPos err=0 currentPosition=0 07:25:27 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:27 Filter is already there-color wheel unchanged 07:25:27 Received message from Master: op=Shutter serial=116294 07:25:27 Shutter LASER close 07:25:27 Received message from Camera: op=State serial=116296 07:25:27 GetSingleValue result=40 Value=cccccccc 07:25:27 SkyScan query 07:25:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:25:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:28 Parameters OK 07:25:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:28 Set A/D data flow result=40 07:25:28 Set A/D channel type result=40 07:25:28 Set A/D encoding result=40 07:25:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:28 Set channel filter=0.000000e+000 result=40 07:25:28 Config A/D Result=40 07:25:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:28 Get A/D filter: -9.255963e+061 result=40 07:25:28 Get A/D value=-858993460 result=40 07:25:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:28 Parameters OK 07:25:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:28 Set A/D data flow result=40 07:25:28 Set A/D channel type result=40 07:25:28 Set A/D encoding result=40 07:25:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:28 Set channel filter=0.000000e+000 result=40 07:25:28 Config A/D Result=40 07:25:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:28 Get A/D filter: -9.255963e+061 result=40 07:25:28 Get A/D value=-858993460 result=40 07:25:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:28 Aux= 07:25:28 Message to Camera, serial 116296 queued 07:26:05 Received message from Master: op=PointingHead serial=116309 07:26:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:26:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:26:05 Point started: ret=0 07:26:05 point_skyscan result=0 07:26:06 Check angles 07:26:06 SkyScan query 07:26:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:26:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:26:06 Message to Master queued w/err=0: serial=116309 error=0 07:26:11 Received message from Master: op=Filter serial=116310 07:26:11 Color wheel filter change from 0 to 0 07:26:11 FLIGetFilterPos err=0 currentPosition=0 07:26:11 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:11 Filter is already there-color wheel unchanged 07:26:11 Received message from Master: op=Shutter serial=116311 07:26:11 Shutter LASER close 07:26:11 Received message from Camera: op=State serial=116313 07:26:11 GetSingleValue result=40 Value=cccccccc 07:26:11 SkyScan query 07:26:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:26:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:12 Parameters OK 07:26:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:12 Set A/D data flow result=40 07:26:12 Set A/D channel type result=40 07:26:12 Set A/D encoding result=40 07:26:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:12 Set channel filter=0.000000e+000 result=40 07:26:12 Config A/D Result=40 07:26:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:12 Get A/D filter: -9.255963e+061 result=40 07:26:12 Get A/D value=-858993460 result=40 07:26:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:12 Parameters OK 07:26:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:12 Set A/D data flow result=40 07:26:12 Set A/D channel type result=40 07:26:12 Set A/D encoding result=40 07:26:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:12 Set channel filter=0.000000e+000 result=40 07:26:12 Config A/D Result=40 07:26:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:12 Get A/D filter: -9.255963e+061 result=40 07:26:12 Get A/D value=-858993460 result=40 07:26:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:12 Aux= 07:26:12 Message to Camera, serial 116313 queued 07:26:49 Received message from Master: op=PointingHead serial=116326 07:26:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:26:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:26:49 Point started: ret=0 07:26:49 point_skyscan result=0 07:26:50 Check angles 07:26:50 SkyScan query 07:26:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:26:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:26:50 Message to Master queued w/err=0: serial=116326 error=0 07:26:55 Received message from Master: op=Filter serial=116327 07:26:55 Color wheel filter change from 0 to 0 07:26:55 FLIGetFilterPos err=0 currentPosition=0 07:26:55 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:55 Filter is already there-color wheel unchanged 07:26:56 Received message from Master: op=Shutter serial=116328 07:26:56 Shutter LASER close 07:26:56 Received message from Camera: op=State serial=116330 07:26:56 GetSingleValue result=40 Value=cccccccc 07:26:56 SkyScan query 07:26:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:26:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:56 Parameters OK 07:26:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:56 Set A/D data flow result=40 07:26:56 Set A/D channel type result=40 07:26:56 Set A/D encoding result=40 07:26:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:56 Set channel filter=0.000000e+000 result=40 07:26:56 Config A/D Result=40 07:26:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:56 Get A/D filter: -9.255963e+061 result=40 07:26:56 Get A/D value=-858993460 result=40 07:26:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:56 Parameters OK 07:26:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:56 Set A/D data flow result=40 07:26:56 Set A/D channel type result=40 07:26:56 Set A/D encoding result=40 07:26:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:56 Set channel filter=0.000000e+000 result=40 07:26:56 Config A/D Result=40 07:26:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:56 Get A/D filter: -9.255963e+061 result=40 07:26:56 Get A/D value=-858993460 result=40 07:26:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:56 Aux= 07:26:56 Message to Camera, serial 116330 queued 07:27:33 Received message from Master: op=PointingHead serial=116343 07:27:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:27:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:27:34 Point started: ret=0 07:27:34 point_skyscan result=0 07:27:34 Check angles 07:27:34 SkyScan query 07:27:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:27:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:27:35 Message to Master queued w/err=0: serial=116343 error=0 07:27:40 Received message from Master: op=Filter serial=116344 07:27:40 Color wheel filter change from 0 to 0 07:27:40 FLIGetFilterPos err=0 currentPosition=0 07:27:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:27:40 Filter is already there-color wheel unchanged 07:27:40 Received message from Master: op=Shutter serial=116345 07:27:40 Shutter LASER close 07:27:40 Received message from Camera: op=State serial=116347 07:27:40 GetSingleValue result=40 Value=cccccccc 07:27:40 SkyScan query 07:27:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:27:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:41 Parameters OK 07:27:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:41 Set A/D data flow result=40 07:27:41 Set A/D channel type result=40 07:27:41 Set A/D encoding result=40 07:27:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:41 Set channel filter=0.000000e+000 result=40 07:27:41 Config A/D Result=40 07:27:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:41 Get A/D filter: -9.255963e+061 result=40 07:27:41 Get A/D value=-858993460 result=40 07:27:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:41 Parameters OK 07:27:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:41 Set A/D data flow result=40 07:27:41 Set A/D channel type result=40 07:27:41 Set A/D encoding result=40 07:27:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:41 Set channel filter=0.000000e+000 result=40 07:27:41 Config A/D Result=40 07:27:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:41 Get A/D filter: -9.255963e+061 result=40 07:27:41 Get A/D value=-858993460 result=40 07:27:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:27:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:27:41 Aux= 07:27:41 Message to Camera, serial 116347 queued 07:28:17 Received message from Master: op=PointingHead serial=116360 07:28:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:28:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:28:18 Point started: ret=0 07:28:18 point_skyscan result=0 07:28:19 Check angles 07:28:19 SkyScan query 07:28:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 07:28:19 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 07:28:19 Check angles 07:28:19 SkyScan query 07:28:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 07:28:20 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 07:28:20 Check angles 07:28:20 SkyScan query 07:28:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.58<-16372 Statuses=0008 0009 07:28:21 Msec=1500 True Az=112.995 Ze=-65.58 Az status=0008 Ze status=0009 07:28:21 Check angles 07:28:21 SkyScan query 07:28:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.58<-17772 Statuses=0008 0009 07:28:21 Msec=2250 True Az=112.995 Ze=-86.58 Az status=0008 Ze status=0009 07:28:22 Check angles 07:28:22 SkyScan query 07:28:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.49<-19166 Statuses=0008 0009 07:28:22 Msec=3000 True Az=112.995 Ze=-107.49 Az status=0008 Ze status=0009 07:28:22 Check angles 07:28:22 SkyScan query 07:28:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.43<-20562 Statuses=0008 0009 07:28:23 Msec=3750 True Az=112.995 Ze=-128.43 Az status=0008 Ze status=0009 07:28:23 Check angles 07:28:23 SkyScan query 07:28:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.865<-21991 Statuses=0008 0009 07:28:24 Msec=4500 True Az=112.995 Ze=-149.865 Az status=0008 Ze status=0009 07:28:24 Check angles 07:28:24 SkyScan query 07:28:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.76<-23384 Statuses=0008 0009 07:28:24 Msec=5250 True Az=112.995 Ze=-170.76 Az status=0008 Ze status=0009 07:28:25 Check angles 07:28:25 SkyScan query 07:28:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:28:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:28:25 Message to Master queued w/err=0: serial=116360 error=0 07:28:30 Received message from Master: op=Filter serial=116361 07:28:30 Color wheel filter change from 0 to 0 07:28:30 FLIGetFilterPos err=0 currentPosition=0 07:28:30 FLIGetStepsRemaining err=0 RemainingSteps=0 07:28:30 Filter is already there-color wheel unchanged 07:28:30 Received message from Master: op=Shutter serial=116362 07:28:30 Shutter LASER open 07:28:31 Received message from Camera: op=State serial=116364 07:28:31 GetSingleValue result=40 Value=cccccccc 07:28:31 SkyScan query 07:28:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:28:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:31 Parameters OK 07:28:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:31 Set A/D data flow result=40 07:28:31 Set A/D channel type result=40 07:28:31 Set A/D encoding result=40 07:28:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:31 Set channel filter=0.000000e+000 result=40 07:28:31 Config A/D Result=40 07:28:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:31 Get A/D filter: -9.255963e+061 result=40 07:28:31 Get A/D value=-858993460 result=40 07:28:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:31 Parameters OK 07:28:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:31 Set A/D data flow result=40 07:28:31 Set A/D channel type result=40 07:28:31 Set A/D encoding result=40 07:28:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:31 Set channel filter=0.000000e+000 result=40 07:28:31 Config A/D Result=40 07:28:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:31 Get A/D filter: -9.255963e+061 result=40 07:28:31 Get A/D value=-858993460 result=40 07:28:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:28:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:28:31 Aux= 07:28:31 Message to Camera, serial 116364 queued 07:28:40 Received message from Master: op=Shutter serial=116374 07:28:40 Shutter LASER close 07:28:40 Received message from Master: op=PointingHead serial=116378 07:28:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:28:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:28:40 Point started: ret=0 07:28:40 point_skyscan result=0 07:28:41 Check angles 07:28:41 SkyScan query 07:28:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.55<-21570 Statuses=0008 0009 07:28:42 Msec=0 True Az=112.995 Ze=-143.55 Az status=0008 Ze status=0009 07:28:42 Check angles 07:28:42 SkyScan query 07:28:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.61<-20174 Statuses=0008 0009 07:28:43 Msec=750 True Az=112.995 Ze=-122.61 Az status=0008 Ze status=0009 07:28:43 Check angles 07:28:43 SkyScan query 07:28:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 07:28:43 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 07:28:43 Check angles 07:28:43 SkyScan query 07:28:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.235<-17349 Statuses=0008 0009 07:28:44 Msec=2250 True Az=112.995 Ze=-80.235 Az status=0008 Ze status=0009 07:28:44 Check angles 07:28:44 SkyScan query 07:28:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.295<-15953 Statuses=0008 0009 07:28:45 Msec=3000 True Az=112.995 Ze=-59.295 Az status=0008 Ze status=0009 07:28:45 Check angles 07:28:45 SkyScan query 07:28:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.83<-14522 Statuses=0008 0009 07:28:46 Msec=3750 True Az=112.995 Ze=-37.83 Az status=0008 Ze status=0009 07:28:46 Check angles 07:28:46 SkyScan query 07:28:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.875<-13125 Statuses=0008 0009 07:28:46 Msec=4500 True Az=112.995 Ze=-16.875 Az status=0008 Ze status=0009 07:28:46 Check angles 07:28:46 SkyScan query 07:28:47 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 07:28:47 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 07:28:47 Check angles 07:28:47 SkyScan query 07:28:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:28:48 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:28:48 Message to Master queued w/err=0: serial=116378 error=0 07:28:53 Received message from Master: op=Filter serial=116379 07:28:53 Color wheel filter change from 0 to 0 07:28:53 FLIGetFilterPos err=0 currentPosition=0 07:28:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:28:53 Filter is already there-color wheel unchanged 07:28:53 Received message from Master: op=Shutter serial=116380 07:28:53 Shutter LASER close 07:28:53 Received message from Camera: op=State serial=116382 07:28:53 GetSingleValue result=40 Value=cccccccc 07:28:53 SkyScan query 07:28:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:28:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:54 Parameters OK 07:28:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:54 Set A/D data flow result=40 07:28:54 Set A/D channel type result=40 07:28:54 Set A/D encoding result=40 07:28:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:54 Set channel filter=0.000000e+000 result=40 07:28:54 Config A/D Result=40 07:28:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:54 Get A/D filter: -9.255963e+061 result=40 07:28:54 Get A/D value=-858993460 result=40 07:28:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:54 Parameters OK 07:28:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:54 Set A/D data flow result=40 07:28:54 Set A/D channel type result=40 07:28:54 Set A/D encoding result=40 07:28:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:54 Set channel filter=0.000000e+000 result=40 07:28:54 Config A/D Result=40 07:28:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:54 Get A/D filter: -9.255963e+061 result=40 07:28:54 Get A/D value=-858993460 result=40 07:28:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:28:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:28:54 Aux= 07:28:54 Message to Camera, serial 116382 queued 07:29:31 Received message from Master: op=PointingHead serial=116395 07:29:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:29:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:29:31 Point started: ret=0 07:29:31 point_skyscan result=0 07:29:32 Check angles 07:29:32 SkyScan query 07:29:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:29:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:29:32 Message to Master queued w/err=0: serial=116395 error=0 07:29:37 Received message from Master: op=Filter serial=116396 07:29:37 Color wheel filter change from 0 to 0 07:29:37 FLIGetFilterPos err=0 currentPosition=0 07:29:37 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:37 Filter is already there-color wheel unchanged 07:29:37 Received message from Master: op=Shutter serial=116397 07:29:37 Shutter LASER close 07:29:37 Received message from Camera: op=State serial=116399 07:29:37 GetSingleValue result=40 Value=cccccccc 07:29:37 SkyScan query 07:29:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:29:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:38 Parameters OK 07:29:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:38 Set A/D data flow result=40 07:29:38 Set A/D channel type result=40 07:29:38 Set A/D encoding result=40 07:29:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:38 Set channel filter=0.000000e+000 result=40 07:29:38 Config A/D Result=40 07:29:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:38 Get A/D filter: -9.255963e+061 result=40 07:29:38 Get A/D value=-858993460 result=40 07:29:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:38 Parameters OK 07:29:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:38 Set A/D data flow result=40 07:29:38 Set A/D channel type result=40 07:29:38 Set A/D encoding result=40 07:29:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:38 Set channel filter=0.000000e+000 result=40 07:29:38 Config A/D Result=40 07:29:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:38 Get A/D filter: -9.255963e+061 result=40 07:29:38 Get A/D value=-858993460 result=40 07:29:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:38 Aux= 07:29:38 Message to Camera, serial 116399 queued 07:30:15 Received message from Master: op=PointingHead serial=116412 07:30:15 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:30:15 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:30:15 Point started: ret=0 07:30:15 point_skyscan result=0 07:30:16 Check angles 07:30:16 SkyScan query 07:30:17 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 07:30:17 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 07:30:17 Check angles 07:30:17 SkyScan query 07:30:17 SkyScan query done: ret=0 az=153.795<-10253 ze=-6.495<-12433 Statuses=0009 0008 07:30:17 Msec=750 True Az=153.795 Ze=-6.495 Az status=0009 Ze status=0008 07:30:17 Check angles 07:30:17 SkyScan query 07:30:18 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 07:30:18 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 07:30:18 Check angles 07:30:18 SkyScan query 07:30:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:30:19 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:30:19 Message to Master queued w/err=0: serial=116412 error=0 07:30:24 Received message from Master: op=Filter serial=116413 07:30:24 Color wheel filter change from 0 to 0 07:30:24 FLIGetFilterPos err=0 currentPosition=0 07:30:24 FLIGetStepsRemaining err=0 RemainingSteps=0 07:30:24 Filter is already there-color wheel unchanged 07:30:24 Received message from Master: op=Shutter serial=116414 07:30:24 Shutter LASER close 07:30:24 Received message from Camera: op=State serial=116416 07:30:24 GetSingleValue result=40 Value=cccccccc 07:30:24 SkyScan query 07:30:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:30:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:25 Parameters OK 07:30:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:25 Set A/D data flow result=40 07:30:25 Set A/D channel type result=40 07:30:25 Set A/D encoding result=40 07:30:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:25 Set channel filter=0.000000e+000 result=40 07:30:25 Config A/D Result=40 07:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:25 Get A/D filter: -9.255963e+061 result=40 07:30:25 Get A/D value=-858993460 result=40 07:30:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:25 Parameters OK 07:30:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:25 Set A/D data flow result=40 07:30:25 Set A/D channel type result=40 07:30:25 Set A/D encoding result=40 07:30:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:25 Set channel filter=0.000000e+000 result=40 07:30:25 Config A/D Result=40 07:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:25 Get A/D filter: -9.255963e+061 result=40 07:30:25 Get A/D value=-858993460 result=40 07:30:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:30:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:30:25 Aux= 07:30:25 Message to Camera, serial 116416 queued 07:31:01 Received message from Master: op=PointingHead serial=116429 07:31:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:31:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:31:02 Point started: ret=0 07:31:02 point_skyscan result=0 07:31:03 Check angles 07:31:03 SkyScan query 07:31:03 SkyScan query done: ret=0 az=153.06<-10204 ze=6.51<-11566 Statuses=0009 0008 07:31:03 Msec=0 True Az=153.06 Ze=6.51 Az status=0009 Ze status=0008 07:31:03 Check angles 07:31:03 SkyScan query 07:31:04 SkyScan query done: ret=0 az=135.24<-9016 ze=6.495<-11567 Statuses=0009 0008 07:31:04 Msec=750 True Az=135.24 Ze=6.495 Az status=0009 Ze status=0008 07:31:04 Check angles 07:31:04 SkyScan query 07:31:05 SkyScan query done: ret=0 az=117.42<-7828 ze=6.495<-11567 Statuses=0009 0008 07:31:05 Msec=1500 True Az=117.42 Ze=6.495 Az status=0009 Ze status=0008 07:31:05 Check angles 07:31:05 SkyScan query 07:31:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:31:05 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:31:05 Message to Master queued w/err=0: serial=116429 error=0 07:31:10 Received message from Master: op=Filter serial=116430 07:31:10 Color wheel filter change from 0 to 0 07:31:10 FLIGetFilterPos err=0 currentPosition=0 07:31:10 FLIGetStepsRemaining err=0 RemainingSteps=0 07:31:10 Filter is already there-color wheel unchanged 07:31:11 Received message from Master: op=Shutter serial=116431 07:31:11 Shutter LASER close 07:31:11 Received message from Camera: op=State serial=116433 07:31:11 GetSingleValue result=40 Value=cccccccc 07:31:11 SkyScan query 07:31:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:31:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:11 Parameters OK 07:31:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:11 Set A/D data flow result=40 07:31:11 Set A/D channel type result=40 07:31:11 Set A/D encoding result=40 07:31:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:11 Set channel filter=0.000000e+000 result=40 07:31:11 Config A/D Result=40 07:31:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:11 Get A/D filter: -9.255963e+061 result=40 07:31:11 Get A/D value=-858993460 result=40 07:31:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:11 Parameters OK 07:31:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:11 Set A/D data flow result=40 07:31:11 Set A/D channel type result=40 07:31:11 Set A/D encoding result=40 07:31:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:11 Set channel filter=0.000000e+000 result=40 07:31:11 Config A/D Result=40 07:31:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:11 Get A/D filter: -9.255963e+061 result=40 07:31:11 Get A/D value=-858993460 result=40 07:31:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:31:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:31:11 Aux= 07:31:11 Message to Camera, serial 116433 queued 07:31:48 Received message from Master: op=PointingHead serial=116446 07:31:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:31:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:31:48 Point started: ret=0 07:31:48 point_skyscan result=0 07:31:49 Check angles 07:31:49 SkyScan query 07:31:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.19<-13546 Statuses=0008 0009 07:31:50 Msec=0 True Az=112.995 Ze=-23.19 Az status=0008 Ze status=0009 07:31:50 Check angles 07:31:50 SkyScan query 07:31:50 SkyScan query done: ret=0 az=112.98<-7532 ze=-44.19<-14946 Statuses=0008 0009 07:31:50 Msec=750 True Az=112.98 Ze=-44.19 Az status=0008 Ze status=0009 07:31:51 Check angles 07:31:51 SkyScan query 07:31:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 07:31:51 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 07:31:51 Check angles 07:31:51 SkyScan query 07:31:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.43<-17762 Statuses=0008 0009 07:31:52 Msec=2250 True Az=112.995 Ze=-86.43 Az status=0008 Ze status=0009 07:31:52 Check angles 07:31:52 SkyScan query 07:31:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 07:31:53 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 07:31:53 Check angles 07:31:53 SkyScan query 07:31:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.34<-20556 Statuses=0008 0009 07:31:53 Msec=3750 True Az=112.995 Ze=-128.34 Az status=0008 Ze status=0009 07:31:54 Check angles 07:31:54 SkyScan query 07:31:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.79<-21986 Statuses=0008 0009 07:31:54 Msec=4500 True Az=112.995 Ze=-149.79 Az status=0008 Ze status=0009 07:31:54 Check angles 07:31:54 SkyScan query 07:31:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.685<-23379 Statuses=0008 0009 07:31:55 Msec=5250 True Az=112.995 Ze=-170.685 Az status=0008 Ze status=0009 07:31:55 Check angles 07:31:55 SkyScan query 07:31:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:31:56 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:31:56 Message to Master queued w/err=0: serial=116446 error=0 07:32:01 Received message from Master: op=Filter serial=116447 07:32:01 Color wheel filter change from 0 to 0 07:32:01 FLIGetFilterPos err=0 currentPosition=0 07:32:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:01 Filter is already there-color wheel unchanged 07:32:01 Received message from Master: op=Shutter serial=116448 07:32:01 Shutter LASER open 07:32:01 Received message from Camera: op=State serial=116450 07:32:01 GetSingleValue result=40 Value=cccccccc 07:32:01 SkyScan query 07:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:32:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:02 Parameters OK 07:32:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:02 Set A/D data flow result=40 07:32:02 Set A/D channel type result=40 07:32:02 Set A/D encoding result=40 07:32:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:02 Set channel filter=0.000000e+000 result=40 07:32:02 Config A/D Result=40 07:32:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:02 Get A/D filter: -9.255963e+061 result=40 07:32:02 Get A/D value=-858993460 result=40 07:32:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:02 Parameters OK 07:32:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:02 Set A/D data flow result=40 07:32:02 Set A/D channel type result=40 07:32:02 Set A/D encoding result=40 07:32:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:02 Set channel filter=0.000000e+000 result=40 07:32:02 Config A/D Result=40 07:32:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:02 Get A/D filter: -9.255963e+061 result=40 07:32:02 Get A/D value=-858993460 result=40 07:32:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:02 Aux= 07:32:02 Message to Camera, serial 116450 queued 07:32:10 Received message from Master: op=Shutter serial=116460 07:32:10 Shutter LASER close 07:32:11 Received message from Master: op=PointingHead serial=116464 07:32:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:32:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:32:11 Point started: ret=0 07:32:11 point_skyscan result=0 07:32:12 Check angles 07:32:12 SkyScan query 07:32:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 07:32:12 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 07:32:12 Check angles 07:32:12 SkyScan query 07:32:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 07:32:13 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 07:32:13 Check angles 07:32:13 SkyScan query 07:32:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.43<-18762 Statuses=0008 0009 07:32:14 Msec=1500 True Az=112.995 Ze=-101.43 Az status=0008 Ze status=0009 07:32:14 Check angles 07:32:14 SkyScan query 07:32:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.46<-17364 Statuses=0008 0009 07:32:14 Msec=2250 True Az=112.995 Ze=-80.46 Az status=0008 Ze status=0009 07:32:15 Check angles 07:32:15 SkyScan query 07:32:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.49<-15966 Statuses=0008 0009 07:32:15 Msec=3000 True Az=112.995 Ze=-59.49 Az status=0008 Ze status=0009 07:32:15 Check angles 07:32:15 SkyScan query 07:32:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.52<-14568 Statuses=0008 0009 07:32:16 Msec=3750 True Az=112.995 Ze=-38.52 Az status=0008 Ze status=0009 07:32:16 Check angles 07:32:16 SkyScan query 07:32:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.58<-13172 Statuses=0008 0009 07:32:17 Msec=4500 True Az=112.995 Ze=-17.58 Az status=0008 Ze status=0009 07:32:17 Check angles 07:32:17 SkyScan query 07:32:17 SkyScan query done: ret=0 az=112.98<-7532 ze=3.36<-11776 Statuses=0008 0009 07:32:17 Msec=5250 True Az=112.98 Ze=3.36 Az status=0008 Ze status=0009 07:32:18 Check angles 07:32:18 SkyScan query 07:32:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:32:18 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:32:18 Message to Master queued w/err=0: serial=116464 error=0 07:32:23 Received message from Master: op=Filter serial=116465 07:32:23 Color wheel filter change from 0 to 0 07:32:23 FLIGetFilterPos err=0 currentPosition=0 07:32:23 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:23 Filter is already there-color wheel unchanged 07:32:23 Received message from Master: op=Shutter serial=116466 07:32:23 Shutter LASER close 07:32:24 Received message from Camera: op=State serial=116468 07:32:24 GetSingleValue result=40 Value=cccccccc 07:32:24 SkyScan query 07:32:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:32:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:24 Parameters OK 07:32:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:24 Set A/D data flow result=40 07:32:24 Set A/D channel type result=40 07:32:24 Set A/D encoding result=40 07:32:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:24 Set channel filter=0.000000e+000 result=40 07:32:24 Config A/D Result=40 07:32:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:24 Get A/D filter: -9.255963e+061 result=40 07:32:24 Get A/D value=-858993460 result=40 07:32:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:24 Parameters OK 07:32:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:24 Set A/D data flow result=40 07:32:24 Set A/D channel type result=40 07:32:24 Set A/D encoding result=40 07:32:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:24 Set channel filter=0.000000e+000 result=40 07:32:24 Config A/D Result=40 07:32:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:24 Get A/D filter: -9.255963e+061 result=40 07:32:24 Get A/D value=-858993460 result=40 07:32:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:24 Aux= 07:32:24 Message to Camera, serial 116468 queued 07:33:01 Received message from Master: op=PointingHead serial=116481 07:33:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:33:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:33:01 Point started: ret=0 07:33:01 point_skyscan result=0 07:33:02 Check angles 07:33:02 SkyScan query 07:33:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:33:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:33:03 Message to Master queued w/err=0: serial=116481 error=0 07:33:08 Received message from Master: op=Filter serial=116482 07:33:08 Color wheel filter change from 0 to 0 07:33:08 FLIGetFilterPos err=0 currentPosition=0 07:33:08 FLIGetStepsRemaining err=0 RemainingSteps=0 07:33:08 Filter is already there-color wheel unchanged 07:33:08 Received message from Master: op=Shutter serial=116483 07:33:08 Shutter LASER close 07:33:08 Received message from Camera: op=State serial=116485 07:33:08 GetSingleValue result=40 Value=cccccccc 07:33:08 SkyScan query 07:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:33:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:08 Parameters OK 07:33:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:08 Set A/D data flow result=40 07:33:08 Set A/D channel type result=40 07:33:08 Set A/D encoding result=40 07:33:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:08 Set channel filter=0.000000e+000 result=40 07:33:08 Config A/D Result=40 07:33:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:08 Get A/D filter: -9.255963e+061 result=40 07:33:08 Get A/D value=-858993460 result=40 07:33:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:08 Parameters OK 07:33:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:08 Set A/D data flow result=40 07:33:08 Set A/D channel type result=40 07:33:08 Set A/D encoding result=40 07:33:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:08 Set channel filter=0.000000e+000 result=40 07:33:08 Config A/D Result=40 07:33:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:08 Get A/D filter: -9.255963e+061 result=40 07:33:08 Get A/D value=-858993460 result=40 07:33:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:33:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:33:08 Aux= 07:33:08 Message to Camera, serial 116485 queued 07:33:38 Received message from Master: op=Identify serial=116487 07:33:45 Received message from Master: op=PointingHead serial=116501 07:33:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:33:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:33:46 Point started: ret=0 07:33:46 point_skyscan result=0 07:33:46 Check angles 07:33:46 SkyScan query 07:33:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:33:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:33:47 Message to Master queued w/err=0: serial=116501 error=0 07:33:52 Received message from Master: op=Filter serial=116502 07:33:52 Color wheel filter change from 0 to 0 07:33:52 FLIGetFilterPos err=0 currentPosition=0 07:33:52 FLIGetStepsRemaining err=0 RemainingSteps=0 07:33:52 Filter is already there-color wheel unchanged 07:33:52 Received message from Master: op=Shutter serial=116503 07:33:52 Shutter LASER close 07:33:52 Received message from Camera: op=State serial=116505 07:33:52 GetSingleValue result=40 Value=cccccccc 07:33:52 SkyScan query 07:33:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:33:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:53 Parameters OK 07:33:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:53 Set A/D data flow result=40 07:33:53 Set A/D channel type result=40 07:33:53 Set A/D encoding result=40 07:33:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:53 Set channel filter=0.000000e+000 result=40 07:33:53 Config A/D Result=40 07:33:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:53 Get A/D filter: -9.255963e+061 result=40 07:33:53 Get A/D value=-858993460 result=40 07:33:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:53 Parameters OK 07:33:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:53 Set A/D data flow result=40 07:33:53 Set A/D channel type result=40 07:33:53 Set A/D encoding result=40 07:33:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:53 Set channel filter=0.000000e+000 result=40 07:33:53 Config A/D Result=40 07:33:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:53 Get A/D filter: -9.255963e+061 result=40 07:33:53 Get A/D value=-858993460 result=40 07:33:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:33:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:33:53 Aux= [UTC 2019-3-5 07:33:53] 07:33:53 Message to Camera, serial 116505 queued 07:34:30 Received message from Master: op=PointingHead serial=116518 07:34:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:34:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:34:30 Point started: ret=0 07:34:30 point_skyscan result=0 07:34:31 Check angles 07:34:31 SkyScan query 07:34:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:34:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:34:31 Message to Master queued w/err=0: serial=116518 error=0 07:34:36 Received message from Master: op=Filter serial=116519 07:34:36 Color wheel filter change from 0 to 0 07:34:36 FLIGetFilterPos err=0 currentPosition=0 07:34:36 FLIGetStepsRemaining err=0 RemainingSteps=0 07:34:36 Filter is already there-color wheel unchanged 07:34:36 Received message from Master: op=Shutter serial=116520 07:34:36 Shutter LASER close 07:34:36 Received message from Camera: op=State serial=116522 07:34:36 GetSingleValue result=40 Value=cccccccc 07:34:36 SkyScan query 07:34:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:34:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:37 Parameters OK 07:34:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:37 Set A/D data flow result=40 07:34:37 Set A/D channel type result=40 07:34:37 Set A/D encoding result=40 07:34:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:37 Set channel filter=0.000000e+000 result=40 07:34:37 Config A/D Result=40 07:34:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:37 Get A/D filter: -9.255963e+061 result=40 07:34:37 Get A/D value=-858993460 result=40 07:34:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:37 Parameters OK 07:34:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:37 Set A/D data flow result=40 07:34:37 Set A/D channel type result=40 07:34:37 Set A/D encoding result=40 07:34:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:37 Set channel filter=0.000000e+000 result=40 07:34:37 Config A/D Result=40 07:34:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:37 Get A/D filter: -9.255963e+061 result=40 07:34:37 Get A/D value=-858993460 result=40 07:34:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:34:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:34:37 Aux= 07:34:37 Message to Camera, serial 116522 queued 07:35:14 Received message from Master: op=PointingHead serial=116535 07:35:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:35:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:35:14 Point started: ret=0 07:35:14 point_skyscan result=0 07:35:15 Check angles 07:35:15 SkyScan query 07:35:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 07:35:16 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 07:35:16 Check angles 07:35:16 SkyScan query 07:35:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.235<-14949 Statuses=0008 0009 07:35:16 Msec=750 True Az=112.995 Ze=-44.235 Az status=0008 Ze status=0009 07:35:16 Check angles 07:35:16 SkyScan query 07:35:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.16<-16344 Statuses=0008 0009 07:35:17 Msec=1500 True Az=112.995 Ze=-65.16 Az status=0008 Ze status=0009 07:35:17 Check angles 07:35:17 SkyScan query 07:35:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.085<-17739 Statuses=0008 0009 07:35:18 Msec=2250 True Az=112.995 Ze=-86.085 Az status=0008 Ze status=0009 07:35:18 Check angles 07:35:18 SkyScan query 07:35:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.055<-19137 Statuses=0008 0009 07:35:19 Msec=3000 True Az=112.995 Ze=-107.055 Az status=0008 Ze status=0009 07:35:19 Check angles 07:35:19 SkyScan query 07:35:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.4<-20560 Statuses=0008 0009 07:35:19 Msec=3750 True Az=112.995 Ze=-128.4 Az status=0008 Ze status=0009 07:35:19 Check angles 07:35:19 SkyScan query 07:35:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.4<-21960 Statuses=0008 0009 07:35:20 Msec=4500 True Az=112.995 Ze=-149.4 Az status=0008 Ze status=0009 07:35:20 Check angles 07:35:20 SkyScan query 07:35:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.34<-23356 Statuses=0008 0009 07:35:21 Msec=5250 True Az=112.995 Ze=-170.34 Az status=0008 Ze status=0009 07:35:21 Check angles 07:35:21 SkyScan query 07:35:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:35:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:35:22 Message to Master queued w/err=0: serial=116535 error=0 07:35:27 Received message from Master: op=Filter serial=116536 07:35:27 Color wheel filter change from 0 to 0 07:35:27 FLIGetFilterPos err=0 currentPosition=0 07:35:27 FLIGetStepsRemaining err=0 RemainingSteps=0 07:35:27 Filter is already there-color wheel unchanged 07:35:27 Received message from Master: op=Shutter serial=116537 07:35:27 Shutter LASER open 07:35:27 Received message from Camera: op=State serial=116539 07:35:27 GetSingleValue result=40 Value=cccccccc 07:35:27 SkyScan query 07:35:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:35:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:27 Parameters OK 07:35:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:27 Set A/D data flow result=40 07:35:27 Set A/D channel type result=40 07:35:27 Set A/D encoding result=40 07:35:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:27 Set channel filter=0.000000e+000 result=40 07:35:27 Config A/D Result=40 07:35:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:27 Get A/D filter: -9.255963e+061 result=40 07:35:27 Get A/D value=-858993460 result=40 07:35:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:27 Parameters OK 07:35:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:27 Set A/D data flow result=40 07:35:27 Set A/D channel type result=40 07:35:27 Set A/D encoding result=40 07:35:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:27 Set channel filter=0.000000e+000 result=40 07:35:27 Config A/D Result=40 07:35:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:27 Get A/D filter: -9.255963e+061 result=40 07:35:27 Get A/D value=-858993460 result=40 07:35:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:35:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:35:27 Aux= 07:35:27 Message to Camera, serial 116539 queued 07:35:35 Received message from Master: op=Shutter serial=116548 07:35:35 Shutter LASER close 07:35:36 Received message from Master: op=PointingHead serial=116552 07:35:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:35:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:35:36 Point started: ret=0 07:35:36 point_skyscan result=0 07:35:37 Check angles 07:35:37 SkyScan query 07:35:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.025<-21535 Statuses=0008 0009 07:35:37 Msec=0 True Az=112.995 Ze=-143.025 Az status=0008 Ze status=0009 07:35:37 Check angles 07:35:37 SkyScan query 07:35:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 07:35:38 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 07:35:38 Check angles 07:35:38 SkyScan query 07:35:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 07:35:39 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 07:35:39 Check angles 07:35:39 SkyScan query 07:35:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.175<-17345 Statuses=0008 0009 07:35:39 Msec=2250 True Az=112.995 Ze=-80.175 Az status=0008 Ze status=0009 07:35:40 Check angles 07:35:40 SkyScan query 07:35:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.235<-15949 Statuses=0008 0009 07:35:40 Msec=3000 True Az=112.995 Ze=-59.235 Az status=0008 Ze status=0009 07:35:40 Check angles 07:35:40 SkyScan query 07:35:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.22<-14548 Statuses=0008 0009 07:35:41 Msec=3750 True Az=112.995 Ze=-38.22 Az status=0008 Ze status=0009 07:35:41 Check angles 07:35:41 SkyScan query 07:35:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.295<-13153 Statuses=0008 0009 07:35:42 Msec=4500 True Az=112.995 Ze=-17.295 Az status=0008 Ze status=0009 07:35:42 Check angles 07:35:42 SkyScan query 07:35:42 SkyScan query done: ret=0 az=113.01<-7534 ze=4.125<-11725 Statuses=0008 0009 07:35:42 Msec=5250 True Az=113.01 Ze=4.125 Az status=0008 Ze status=0009 07:35:43 Check angles 07:35:43 SkyScan query 07:35:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:35:43 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:35:43 Message to Master queued w/err=0: serial=116552 error=0 07:35:48 Received message from Master: op=Filter serial=116553 07:35:48 Color wheel filter change from 0 to 0 07:35:48 FLIGetFilterPos err=0 currentPosition=0 07:35:48 FLIGetStepsRemaining err=0 RemainingSteps=0 07:35:48 Filter is already there-color wheel unchanged 07:35:48 Received message from Master: op=Shutter serial=116554 07:35:48 Shutter LASER close 07:35:49 Received message from Camera: op=State serial=116556 07:35:49 GetSingleValue result=40 Value=cccccccc 07:35:49 SkyScan query 07:35:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:35:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:49 Parameters OK 07:35:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:49 Set A/D data flow result=40 07:35:49 Set A/D channel type result=40 07:35:49 Set A/D encoding result=40 07:35:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:49 Set channel filter=0.000000e+000 result=40 07:35:49 Config A/D Result=40 07:35:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:49 Get A/D filter: -9.255963e+061 result=40 07:35:49 Get A/D value=-858993460 result=40 07:35:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:49 Parameters OK 07:35:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:49 Set A/D data flow result=40 07:35:49 Set A/D channel type result=40 07:35:49 Set A/D encoding result=40 07:35:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:49 Set channel filter=0.000000e+000 result=40 07:35:49 Config A/D Result=40 07:35:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:49 Get A/D filter: -9.255963e+061 result=40 07:35:49 Get A/D value=-858993460 result=40 07:35:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:35:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:35:49 Aux= 07:35:49 Message to Camera, serial 116556 queued 07:36:26 Received message from Master: op=PointingHead serial=116569 07:36:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:36:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:36:26 Point started: ret=0 07:36:26 point_skyscan result=0 07:36:27 Check angles 07:36:27 SkyScan query 07:36:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:36:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:36:28 Message to Master queued w/err=0: serial=116569 error=0 07:36:33 Received message from Master: op=Filter serial=116570 07:36:33 Color wheel filter change from 0 to 0 07:36:33 FLIGetFilterPos err=0 currentPosition=0 07:36:33 FLIGetStepsRemaining err=0 RemainingSteps=0 07:36:33 Filter is already there-color wheel unchanged 07:36:33 Received message from Master: op=Shutter serial=116571 07:36:33 Shutter LASER close 07:36:33 Received message from Camera: op=State serial=116573 07:36:33 GetSingleValue result=40 Value=cccccccc 07:36:33 SkyScan query 07:36:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:36:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:34 Parameters OK 07:36:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:34 Set A/D data flow result=40 07:36:34 Set A/D channel type result=40 07:36:34 Set A/D encoding result=40 07:36:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:34 Set channel filter=0.000000e+000 result=40 07:36:34 Config A/D Result=40 07:36:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:34 Get A/D filter: -9.255963e+061 result=40 07:36:34 Get A/D value=-858993460 result=40 07:36:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:34 Parameters OK 07:36:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:34 Set A/D data flow result=40 07:36:34 Set A/D channel type result=40 07:36:34 Set A/D encoding result=40 07:36:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:34 Set channel filter=0.000000e+000 result=40 07:36:34 Config A/D Result=40 07:36:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:34 Get A/D filter: -9.255963e+061 result=40 07:36:34 Get A/D value=-858993460 result=40 07:36:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:36:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:36:34 Aux= 07:36:34 Message to Camera, serial 116573 queued 07:37:10 Received message from Master: op=PointingHead serial=116586 07:37:10 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:37:10 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:37:11 Point started: ret=0 07:37:11 point_skyscan result=0 07:37:11 Check angles 07:37:11 SkyScan query 07:37:12 SkyScan query done: ret=0 az=135.765<-9051 ze=-6.51<-12434 Statuses=0009 0008 07:37:12 Msec=0 True Az=135.765 Ze=-6.51 Az status=0009 Ze status=0008 07:37:12 Check angles 07:37:12 SkyScan query 07:37:13 SkyScan query done: ret=0 az=153.255<-10217 ze=-6.495<-12433 Statuses=0009 0008 07:37:13 Msec=750 True Az=153.255 Ze=-6.495 Az status=0009 Ze status=0008 07:37:13 Check angles 07:37:13 SkyScan query 07:37:14 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 07:37:14 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 07:37:14 Check angles 07:37:14 SkyScan query 07:37:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:37:14 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:37:14 Message to Master queued w/err=0: serial=116586 error=0 07:37:19 Received message from Master: op=Filter serial=116587 07:37:19 Color wheel filter change from 0 to 0 07:37:19 FLIGetFilterPos err=0 currentPosition=0 07:37:19 FLIGetStepsRemaining err=0 RemainingSteps=0 07:37:19 Filter is already there-color wheel unchanged 07:37:19 Received message from Master: op=Shutter serial=116588 07:37:19 Shutter LASER close 07:37:20 Received message from Camera: op=State serial=116590 07:37:20 GetSingleValue result=40 Value=cccccccc 07:37:20 SkyScan query 07:37:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:37:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:20 Parameters OK 07:37:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:20 Set A/D data flow result=40 07:37:20 Set A/D channel type result=40 07:37:20 Set A/D encoding result=40 07:37:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:20 Set channel filter=0.000000e+000 result=40 07:37:20 Config A/D Result=40 07:37:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:20 Get A/D filter: -9.255963e+061 result=40 07:37:20 Get A/D value=-858993460 result=40 07:37:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:20 Parameters OK 07:37:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:20 Set A/D data flow result=40 07:37:20 Set A/D channel type result=40 07:37:20 Set A/D encoding result=40 07:37:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:20 Set channel filter=0.000000e+000 result=40 07:37:20 Config A/D Result=40 07:37:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:20 Get A/D filter: -9.255963e+061 result=40 07:37:20 Get A/D value=-858993460 result=40 07:37:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:37:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:37:20 Aux= 07:37:20 Message to Camera, serial 116590 queued 07:37:57 Received message from Master: op=PointingHead serial=116603 07:37:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:37:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:37:57 Point started: ret=0 07:37:57 point_skyscan result=0 07:37:58 Check angles 07:37:58 SkyScan query 07:37:59 SkyScan query done: ret=0 az=153.21<-10214 ze=6.51<-11566 Statuses=0009 0008 07:37:59 Msec=0 True Az=153.21 Ze=6.51 Az status=0009 Ze status=0008 07:37:59 Check angles 07:37:59 SkyScan query 07:37:59 SkyScan query done: ret=0 az=135.3<-9020 ze=6.495<-11567 Statuses=0009 0008 07:37:59 Msec=750 True Az=135.3 Ze=6.495 Az status=0009 Ze status=0008 07:38:00 Check angles 07:38:00 SkyScan query 07:38:00 SkyScan query done: ret=0 az=117.855<-7857 ze=6.495<-11567 Statuses=0009 0008 07:38:00 Msec=1500 True Az=117.855 Ze=6.495 Az status=0009 Ze status=0008 07:38:00 Check angles 07:38:00 SkyScan query 07:38:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:38:01 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:38:01 Message to Master queued w/err=0: serial=116603 error=0 07:38:06 Received message from Master: op=Filter serial=116604 07:38:06 Color wheel filter change from 0 to 0 07:38:06 FLIGetFilterPos err=0 currentPosition=0 07:38:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:06 Filter is already there-color wheel unchanged 07:38:06 Received message from Master: op=Shutter serial=116605 07:38:06 Shutter LASER close 07:38:06 Received message from Camera: op=State serial=116607 07:38:06 GetSingleValue result=40 Value=cccccccc 07:38:06 SkyScan query 07:38:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:38:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:07 Parameters OK 07:38:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:07 Set A/D data flow result=40 07:38:07 Set A/D channel type result=40 07:38:07 Set A/D encoding result=40 07:38:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:07 Set channel filter=0.000000e+000 result=40 07:38:07 Config A/D Result=40 07:38:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:07 Get A/D filter: -9.255963e+061 result=40 07:38:07 Get A/D value=-858993460 result=40 07:38:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:07 Parameters OK 07:38:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:07 Set A/D data flow result=40 07:38:07 Set A/D channel type result=40 07:38:07 Set A/D encoding result=40 07:38:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:07 Set channel filter=0.000000e+000 result=40 07:38:07 Config A/D Result=40 07:38:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:07 Get A/D filter: -9.255963e+061 result=40 07:38:07 Get A/D value=-858993460 result=40 07:38:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:07 Aux= 07:38:07 Message to Camera, serial 116607 queued 07:38:43 Received message from Master: op=PointingHead serial=116620 07:38:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:38:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:38:44 Point started: ret=0 07:38:44 point_skyscan result=0 07:38:45 Check angles 07:38:45 SkyScan query 07:38:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 07:38:45 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 07:38:45 Check angles 07:38:45 SkyScan query 07:38:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 07:38:46 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 07:38:46 Check angles 07:38:46 SkyScan query 07:38:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.265<-16351 Statuses=0008 0009 07:38:47 Msec=1500 True Az=112.995 Ze=-65.265 Az status=0008 Ze status=0009 07:38:47 Check angles 07:38:47 SkyScan query 07:38:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.22<-17748 Statuses=0008 0009 07:38:47 Msec=2250 True Az=112.995 Ze=-86.22 Az status=0008 Ze status=0009 07:38:48 Check angles 07:38:48 SkyScan query 07:38:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.16<-19144 Statuses=0008 0009 07:38:48 Msec=3000 True Az=112.995 Ze=-107.16 Az status=0008 Ze status=0009 07:38:48 Check angles 07:38:48 SkyScan query 07:38:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.1<-20540 Statuses=0008 0009 07:38:49 Msec=3750 True Az=112.995 Ze=-128.1 Az status=0008 Ze status=0009 07:38:49 Check angles 07:38:49 SkyScan query 07:38:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.055<-21937 Statuses=0008 0009 07:38:50 Msec=4500 True Az=112.995 Ze=-149.055 Az status=0008 Ze status=0009 07:38:50 Check angles 07:38:50 SkyScan query 07:38:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.01<-23334 Statuses=0008 0009 07:38:50 Msec=5250 True Az=112.995 Ze=-170.01 Az status=0008 Ze status=0009 07:38:51 Check angles 07:38:51 SkyScan query 07:38:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:38:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:38:51 Message to Master queued w/err=0: serial=116620 error=0 07:38:56 Received message from Master: op=Filter serial=116621 07:38:56 Color wheel filter change from 0 to 0 07:38:56 FLIGetFilterPos err=0 currentPosition=0 07:38:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:56 Filter is already there-color wheel unchanged 07:38:56 Received message from Master: op=Shutter serial=116622 07:38:56 Shutter LASER open 07:38:57 Received message from Camera: op=State serial=116624 07:38:57 GetSingleValue result=40 Value=cccccccc 07:38:57 SkyScan query 07:38:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:38:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:57 Parameters OK 07:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:57 Set A/D data flow result=40 07:38:57 Set A/D channel type result=40 07:38:57 Set A/D encoding result=40 07:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:57 Set channel filter=0.000000e+000 result=40 07:38:57 Config A/D Result=40 07:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:57 Get A/D filter: -9.255963e+061 result=40 07:38:57 Get A/D value=-858993460 result=40 07:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:57 Parameters OK 07:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:57 Set A/D data flow result=40 07:38:57 Set A/D channel type result=40 07:38:57 Set A/D encoding result=40 07:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:57 Set channel filter=0.000000e+000 result=40 07:38:57 Config A/D Result=40 07:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:57 Get A/D filter: -9.255963e+061 result=40 07:38:57 Get A/D value=-858993460 result=40 07:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:57 Aux= 07:38:57 Message to Camera, serial 116624 queued 07:39:06 Received message from Master: op=Shutter serial=116634 07:39:06 Shutter LASER close 07:39:06 Received message from Master: op=PointingHead serial=116638 07:39:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:39:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:39:06 Point started: ret=0 07:39:06 point_skyscan result=0 07:39:07 Check angles 07:39:07 SkyScan query 07:39:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.785<-21519 Statuses=0008 0009 07:39:08 Msec=0 True Az=112.995 Ze=-142.785 Az status=0008 Ze status=0009 07:39:08 Check angles 07:39:08 SkyScan query 07:39:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.335<-20089 Statuses=0008 0009 07:39:08 Msec=750 True Az=112.995 Ze=-121.335 Az status=0008 Ze status=0009 07:39:09 Check angles 07:39:09 SkyScan query 07:39:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.395<-18693 Statuses=0008 0009 07:39:09 Msec=1500 True Az=112.995 Ze=-100.395 Az status=0008 Ze status=0009 07:39:09 Check angles 07:39:09 SkyScan query 07:39:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.425<-17295 Statuses=0008 0009 07:39:10 Msec=2250 True Az=112.995 Ze=-79.425 Az status=0008 Ze status=0009 07:39:10 Check angles 07:39:10 SkyScan query 07:39:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.47<-15898 Statuses=0008 0009 07:39:11 Msec=3000 True Az=112.995 Ze=-58.47 Az status=0008 Ze status=0009 07:39:11 Check angles 07:39:11 SkyScan query 07:39:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.53<-14502 Statuses=0008 0009 07:39:11 Msec=3750 True Az=112.995 Ze=-37.53 Az status=0008 Ze status=0009 07:39:12 Check angles 07:39:12 SkyScan query 07:39:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.56<-13104 Statuses=0008 0009 07:39:12 Msec=4500 True Az=112.995 Ze=-16.56 Az status=0008 Ze status=0009 07:39:12 Check angles 07:39:12 SkyScan query 07:39:13 SkyScan query done: ret=0 az=113.01<-7534 ze=4.335<-11711 Statuses=0008 0009 07:39:13 Msec=5250 True Az=113.01 Ze=4.335 Az status=0008 Ze status=0009 07:39:13 Check angles 07:39:13 SkyScan query 07:39:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:39:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:39:14 Message to Master queued w/err=0: serial=116638 error=0 07:39:19 Received message from Master: op=Filter serial=116639 07:39:19 Color wheel filter change from 0 to 0 07:39:19 FLIGetFilterPos err=0 currentPosition=0 07:39:19 FLIGetStepsRemaining err=0 RemainingSteps=0 07:39:19 Filter is already there-color wheel unchanged 07:39:19 Received message from Master: op=Shutter serial=116640 07:39:19 Shutter LASER close 07:39:19 Received message from Camera: op=State serial=116642 07:39:19 GetSingleValue result=40 Value=cccccccc 07:39:19 SkyScan query 07:39:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:39:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:20 Parameters OK 07:39:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:20 Set A/D data flow result=40 07:39:20 Set A/D channel type result=40 07:39:20 Set A/D encoding result=40 07:39:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:20 Set channel filter=0.000000e+000 result=40 07:39:20 Config A/D Result=40 07:39:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:20 Get A/D filter: -9.255963e+061 result=40 07:39:20 Get A/D value=-858993460 result=40 07:39:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:20 Parameters OK 07:39:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:20 Set A/D data flow result=40 07:39:20 Set A/D channel type result=40 07:39:20 Set A/D encoding result=40 07:39:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:20 Set channel filter=0.000000e+000 result=40 07:39:20 Config A/D Result=40 07:39:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:20 Get A/D filter: -9.255963e+061 result=40 07:39:20 Get A/D value=-858993460 result=40 07:39:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:39:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:39:20 Aux= 07:39:20 Message to Camera, serial 116642 queued 07:39:56 Received message from Master: op=PointingHead serial=116655 07:39:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:39:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:39:57 Point started: ret=0 07:39:57 point_skyscan result=0 07:39:58 Check angles 07:39:58 SkyScan query 07:39:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:39:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:39:58 Message to Master queued w/err=0: serial=116655 error=0 07:40:03 Received message from Master: op=Filter serial=116656 07:40:03 Color wheel filter change from 0 to 0 07:40:03 FLIGetFilterPos err=0 currentPosition=0 07:40:03 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:03 Filter is already there-color wheel unchanged 07:40:03 Received message from Master: op=Shutter serial=116657 07:40:03 Shutter LASER close 07:40:04 Received message from Camera: op=State serial=116659 07:40:04 GetSingleValue result=40 Value=cccccccc 07:40:04 SkyScan query 07:40:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:40:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:04 Parameters OK 07:40:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:04 Set A/D data flow result=40 07:40:04 Set A/D channel type result=40 07:40:04 Set A/D encoding result=40 07:40:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:04 Set channel filter=0.000000e+000 result=40 07:40:04 Config A/D Result=40 07:40:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:04 Get A/D filter: -9.255963e+061 result=40 07:40:04 Get A/D value=-858993460 result=40 07:40:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:04 Parameters OK 07:40:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:04 Set A/D data flow result=40 07:40:04 Set A/D channel type result=40 07:40:04 Set A/D encoding result=40 07:40:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:04 Set channel filter=0.000000e+000 result=40 07:40:04 Config A/D Result=40 07:40:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:04 Get A/D filter: -9.255963e+061 result=40 07:40:04 Get A/D value=-858993460 result=40 07:40:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:04 Aux= 07:40:04 Message to Camera, serial 116659 queued 07:40:41 Received message from Master: op=PointingHead serial=116672 07:40:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:40:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:40:41 Point started: ret=0 07:40:41 point_skyscan result=0 07:40:42 Check angles 07:40:42 SkyScan query 07:40:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:40:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:40:43 Message to Master queued w/err=0: serial=116672 error=0 07:40:48 Received message from Master: op=Filter serial=116673 07:40:48 Color wheel filter change from 0 to 0 07:40:48 FLIGetFilterPos err=0 currentPosition=0 07:40:48 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:48 Filter is already there-color wheel unchanged 07:40:48 Received message from Master: op=Shutter serial=116674 07:40:48 Shutter LASER close 07:40:48 Received message from Camera: op=State serial=116676 07:40:48 GetSingleValue result=40 Value=cccccccc 07:40:48 SkyScan query 07:40:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:40:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:48 Parameters OK 07:40:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:48 Set A/D data flow result=40 07:40:48 Set A/D channel type result=40 07:40:48 Set A/D encoding result=40 07:40:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:48 Set channel filter=0.000000e+000 result=40 07:40:48 Config A/D Result=40 07:40:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:48 Get A/D filter: -9.255963e+061 result=40 07:40:48 Get A/D value=-858993460 result=40 07:40:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:48 Parameters OK 07:40:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:48 Set A/D data flow result=40 07:40:48 Set A/D channel type result=40 07:40:48 Set A/D encoding result=40 07:40:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:48 Set channel filter=0.000000e+000 result=40 07:40:48 Config A/D Result=40 07:40:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:48 Get A/D filter: -9.255963e+061 result=40 07:40:48 Get A/D value=-858993460 result=40 07:40:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:48 Aux= 07:40:48 Message to Camera, serial 116676 queued 07:41:25 Received message from Master: op=PointingHead serial=116689 07:41:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:41:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:41:26 Point started: ret=0 07:41:26 point_skyscan result=0 07:41:26 Check angles 07:41:26 SkyScan query 07:41:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:41:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:41:27 Message to Master queued w/err=0: serial=116689 error=0 07:41:32 Received message from Master: op=Filter serial=116690 07:41:32 Color wheel filter change from 0 to 0 07:41:32 FLIGetFilterPos err=0 currentPosition=0 07:41:32 FLIGetStepsRemaining err=0 RemainingSteps=0 07:41:32 Filter is already there-color wheel unchanged 07:41:32 Received message from Master: op=Shutter serial=116691 07:41:32 Shutter LASER close 07:41:32 Received message from Camera: op=State serial=116693 07:41:32 GetSingleValue result=40 Value=cccccccc 07:41:32 SkyScan query 07:41:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:41:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:33 Parameters OK 07:41:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:33 Set A/D data flow result=40 07:41:33 Set A/D channel type result=40 07:41:33 Set A/D encoding result=40 07:41:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:33 Set channel filter=0.000000e+000 result=40 07:41:33 Config A/D Result=40 07:41:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:33 Get A/D filter: -9.255963e+061 result=40 07:41:33 Get A/D value=-858993460 result=40 07:41:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:33 Parameters OK 07:41:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:33 Set A/D data flow result=40 07:41:33 Set A/D channel type result=40 07:41:33 Set A/D encoding result=40 07:41:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:33 Set channel filter=0.000000e+000 result=40 07:41:33 Config A/D Result=40 07:41:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:33 Get A/D filter: -9.255963e+061 result=40 07:41:33 Get A/D value=-858993460 result=40 07:41:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:41:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:41:33 Aux= 07:41:33 Message to Camera, serial 116693 queued 07:42:10 Received message from Master: op=PointingHead serial=116706 07:42:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:42:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:42:10 Point started: ret=0 07:42:10 point_skyscan result=0 07:42:11 Check angles 07:42:11 SkyScan query 07:42:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.73<-13582 Statuses=0008 0009 07:42:11 Msec=0 True Az=112.995 Ze=-23.73 Az status=0008 Ze status=0009 07:42:12 Check angles 07:42:12 SkyScan query 07:42:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.105<-15007 Statuses=0008 0009 07:42:12 Msec=750 True Az=112.995 Ze=-45.105 Az status=0008 Ze status=0009 07:42:12 Check angles 07:42:12 SkyScan query 07:42:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.075<-16405 Statuses=0008 0009 07:42:13 Msec=1500 True Az=112.995 Ze=-66.075 Az status=0008 Ze status=0009 07:42:13 Check angles 07:42:13 SkyScan query 07:42:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.045<-17803 Statuses=0008 0009 07:42:14 Msec=2250 True Az=112.995 Ze=-87.045 Az status=0008 Ze status=0009 07:42:14 Check angles 07:42:14 SkyScan query 07:42:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.45<-19230 Statuses=0008 0009 07:42:14 Msec=3000 True Az=112.995 Ze=-108.45 Az status=0008 Ze status=0009 07:42:15 Check angles 07:42:15 SkyScan query 07:42:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.405<-20627 Statuses=0008 0009 07:42:15 Msec=3750 True Az=112.995 Ze=-129.405 Az status=0008 Ze status=0009 07:42:15 Check angles 07:42:15 SkyScan query 07:42:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.36<-22024 Statuses=0008 0009 07:42:16 Msec=4500 True Az=112.995 Ze=-150.36 Az status=0008 Ze status=0009 07:42:16 Check angles 07:42:16 SkyScan query 07:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0008 0009 07:42:17 Msec=5250 True Az=112.995 Ze=-171.45 Az status=0008 Ze status=0009 07:42:17 Check angles 07:42:17 SkyScan query 07:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:42:17 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:42:17 Message to Master queued w/err=0: serial=116706 error=0 07:42:22 Received message from Master: op=Filter serial=116707 07:42:22 Color wheel filter change from 0 to 0 07:42:22 FLIGetFilterPos err=0 currentPosition=0 07:42:22 FLIGetStepsRemaining err=0 RemainingSteps=0 07:42:22 Filter is already there-color wheel unchanged 07:42:23 Received message from Master: op=Shutter serial=116708 07:42:23 Shutter LASER open 07:42:23 Received message from Camera: op=State serial=116710 07:42:23 GetSingleValue result=40 Value=cccccccc 07:42:23 SkyScan query 07:42:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:42:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:23 Parameters OK 07:42:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:23 Set A/D data flow result=40 07:42:23 Set A/D channel type result=40 07:42:23 Set A/D encoding result=40 07:42:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:23 Set channel filter=0.000000e+000 result=40 07:42:23 Config A/D Result=40 07:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:23 Get A/D filter: -9.255963e+061 result=40 07:42:23 Get A/D value=-858993460 result=40 07:42:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:23 Parameters OK 07:42:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:23 Set A/D data flow result=40 07:42:23 Set A/D channel type result=40 07:42:23 Set A/D encoding result=40 07:42:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:23 Set channel filter=0.000000e+000 result=40 07:42:23 Config A/D Result=40 07:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:23 Get A/D filter: -9.255963e+061 result=40 07:42:23 Get A/D value=-858993460 result=40 07:42:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:42:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:42:23 Aux= 07:42:23 Message to Camera, serial 116710 queued 07:42:32 Received message from Master: op=Shutter serial=116720 07:42:32 Shutter LASER close 07:42:32 Received message from Master: op=PointingHead serial=116724 07:42:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:42:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:42:33 Point started: ret=0 07:42:33 point_skyscan result=0 07:42:33 Check angles 07:42:33 SkyScan query 07:42:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 07:42:34 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 07:42:34 Check angles 07:42:34 SkyScan query 07:42:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.785<-20119 Statuses=0008 0009 07:42:35 Msec=750 True Az=112.995 Ze=-121.785 Az status=0008 Ze status=0009 07:42:35 Check angles 07:42:35 SkyScan query 07:42:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.41<-18694 Statuses=0008 0009 07:42:36 Msec=1500 True Az=112.995 Ze=-100.41 Az status=0008 Ze status=0009 07:42:36 Check angles 07:42:36 SkyScan query 07:42:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.44<-17296 Statuses=0008 0009 07:42:36 Msec=2250 True Az=112.995 Ze=-79.44 Az status=0008 Ze status=0009 07:42:36 Check angles 07:42:36 SkyScan query 07:42:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.5<-15900 Statuses=0008 0009 07:42:37 Msec=3000 True Az=112.995 Ze=-58.5 Az status=0008 Ze status=0009 07:42:37 Check angles 07:42:37 SkyScan query 07:42:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.56<-14504 Statuses=0008 0009 07:42:38 Msec=3750 True Az=112.995 Ze=-37.56 Az status=0008 Ze status=0009 07:42:38 Check angles 07:42:38 SkyScan query 07:42:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.59<-13106 Statuses=0008 0009 07:42:39 Msec=4500 True Az=112.995 Ze=-16.59 Az status=0008 Ze status=0009 07:42:39 Check angles 07:42:39 SkyScan query 07:42:39 SkyScan query done: ret=0 az=113.01<-7534 ze=4.32<-11712 Statuses=0008 0009 07:42:39 Msec=5250 True Az=113.01 Ze=4.32 Az status=0008 Ze status=0009 07:42:39 Check angles 07:42:39 SkyScan query 07:42:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:42:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:42:40 Message to Master queued w/err=0: serial=116724 error=0 07:42:45 Received message from Master: op=Filter serial=116725 07:42:45 Color wheel filter change from 0 to 0 07:42:45 FLIGetFilterPos err=0 currentPosition=0 07:42:45 FLIGetStepsRemaining err=0 RemainingSteps=0 07:42:45 Filter is already there-color wheel unchanged 07:42:45 Received message from Master: op=Shutter serial=116726 07:42:45 Shutter LASER close 07:42:45 Received message from Camera: op=State serial=116728 07:42:45 GetSingleValue result=40 Value=cccccccc 07:42:45 SkyScan query 07:42:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:42:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:46 Parameters OK 07:42:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:46 Set A/D data flow result=40 07:42:46 Set A/D channel type result=40 07:42:46 Set A/D encoding result=40 07:42:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:46 Set channel filter=0.000000e+000 result=40 07:42:46 Config A/D Result=40 07:42:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:46 Get A/D filter: -9.255963e+061 result=40 07:42:46 Get A/D value=-858993460 result=40 07:42:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:46 Parameters OK 07:42:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:46 Set A/D data flow result=40 07:42:46 Set A/D channel type result=40 07:42:46 Set A/D encoding result=40 07:42:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:46 Set channel filter=0.000000e+000 result=40 07:42:46 Config A/D Result=40 07:42:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:46 Get A/D filter: -9.255963e+061 result=40 07:42:46 Get A/D value=-858993460 result=40 07:42:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:42:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:42:46 Aux= 07:42:46 Message to Camera, serial 116728 queued 07:43:23 Received message from Master: op=PointingHead serial=116741 07:43:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:43:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:43:23 Point started: ret=0 07:43:23 point_skyscan result=0 07:43:24 Check angles 07:43:24 SkyScan query 07:43:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:43:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:43:24 Message to Master queued w/err=0: serial=116741 error=0 07:43:29 Received message from Master: op=Filter serial=116742 07:43:29 Color wheel filter change from 0 to 0 07:43:29 FLIGetFilterPos err=0 currentPosition=0 07:43:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:43:29 Filter is already there-color wheel unchanged 07:43:30 Received message from Master: op=Shutter serial=116743 07:43:30 Shutter LASER close 07:43:30 Received message from Camera: op=State serial=116745 07:43:30 GetSingleValue result=40 Value=cccccccc 07:43:30 SkyScan query 07:43:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:43:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:30 Parameters OK 07:43:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:30 Set A/D data flow result=40 07:43:30 Set A/D channel type result=40 07:43:30 Set A/D encoding result=40 07:43:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:30 Set channel filter=0.000000e+000 result=40 07:43:30 Config A/D Result=40 07:43:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:30 Get A/D filter: -9.255963e+061 result=40 07:43:30 Get A/D value=-858993460 result=40 07:43:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:30 Parameters OK 07:43:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:30 Set A/D data flow result=40 07:43:30 Set A/D channel type result=40 07:43:30 Set A/D encoding result=40 07:43:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:30 Set channel filter=0.000000e+000 result=40 07:43:30 Config A/D Result=40 07:43:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:30 Get A/D filter: -9.255963e+061 result=40 07:43:30 Get A/D value=-858993460 result=40 07:43:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:43:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:43:30 Aux= 07:43:30 Message to Camera, serial 116745 queued [UTC 2019-3-5 07:43:50] 07:44:07 Received message from Master: op=PointingHead serial=116758 07:44:07 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:44:07 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:44:07 Point started: ret=0 07:44:07 point_skyscan result=0 07:44:08 Check angles 07:44:08 SkyScan query 07:44:09 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.51<-12434 Statuses=0009 0008 07:44:09 Msec=0 True Az=135.915 Ze=-6.51 Az status=0009 Ze status=0008 07:44:09 Check angles 07:44:09 SkyScan query 07:44:09 SkyScan query done: ret=0 az=153.48<-10232 ze=-6.495<-12433 Statuses=0009 0008 07:44:09 Msec=750 True Az=153.48 Ze=-6.495 Az status=0009 Ze status=0008 07:44:10 Check angles 07:44:10 SkyScan query 07:44:10 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 07:44:10 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 07:44:10 Check angles 07:44:10 SkyScan query 07:44:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:44:11 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:44:11 Message to Master queued w/err=0: serial=116758 error=0 07:44:16 Received message from Master: op=Filter serial=116759 07:44:16 Color wheel filter change from 0 to 0 07:44:16 FLIGetFilterPos err=0 currentPosition=0 07:44:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:44:16 Filter is already there-color wheel unchanged 07:44:16 Received message from Master: op=Shutter serial=116760 07:44:16 Shutter LASER close 07:44:16 Received message from Camera: op=State serial=116762 07:44:16 GetSingleValue result=40 Value=cccccccc 07:44:16 SkyScan query 07:44:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:44:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:17 Parameters OK 07:44:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:17 Set A/D data flow result=40 07:44:17 Set A/D channel type result=40 07:44:17 Set A/D encoding result=40 07:44:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:17 Set channel filter=0.000000e+000 result=40 07:44:17 Config A/D Result=40 07:44:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:17 Get A/D filter: -9.255963e+061 result=40 07:44:17 Get A/D value=-858993460 result=40 07:44:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:17 Parameters OK 07:44:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:17 Set A/D data flow result=40 07:44:17 Set A/D channel type result=40 07:44:17 Set A/D encoding result=40 07:44:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:17 Set channel filter=0.000000e+000 result=40 07:44:17 Config A/D Result=40 07:44:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:17 Get A/D filter: -9.255963e+061 result=40 07:44:17 Get A/D value=-858993460 result=40 07:44:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:44:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:44:17 Aux= 07:44:17 Message to Camera, serial 116762 queued 07:44:54 Received message from Master: op=PointingHead serial=116775 07:44:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:44:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:44:54 Point started: ret=0 07:44:54 point_skyscan result=0 07:44:55 Check angles 07:44:55 SkyScan query 07:44:55 SkyScan query done: ret=0 az=153<-10200 ze=6.51<-11566 Statuses=0009 0008 07:44:55 Msec=0 True Az=153 Ze=6.51 Az status=0009 Ze status=0008 07:44:55 Check angles 07:44:55 SkyScan query 07:44:56 SkyScan query done: ret=0 az=135.6<-9040 ze=6.495<-11567 Statuses=0009 0008 07:44:56 Msec=750 True Az=135.6 Ze=6.495 Az status=0009 Ze status=0008 07:44:56 Check angles 07:44:56 SkyScan query 07:44:57 SkyScan query done: ret=0 az=117.63<-7842 ze=6.495<-11567 Statuses=0009 0008 07:44:57 Msec=1500 True Az=117.63 Ze=6.495 Az status=0009 Ze status=0008 07:44:57 Check angles 07:44:57 SkyScan query 07:44:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:44:58 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:44:58 Message to Master queued w/err=0: serial=116775 error=0 07:45:03 Received message from Master: op=Filter serial=116776 07:45:03 Color wheel filter change from 0 to 0 07:45:03 FLIGetFilterPos err=0 currentPosition=0 07:45:03 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:03 Filter is already there-color wheel unchanged 07:45:03 Received message from Master: op=Shutter serial=116777 07:45:03 Shutter LASER close 07:45:03 Received message from Camera: op=State serial=116779 07:45:03 GetSingleValue result=40 Value=cccccccc 07:45:03 SkyScan query 07:45:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:45:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:03 Parameters OK 07:45:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:03 Set A/D data flow result=40 07:45:03 Set A/D channel type result=40 07:45:03 Set A/D encoding result=40 07:45:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:03 Set channel filter=0.000000e+000 result=40 07:45:03 Config A/D Result=40 07:45:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:03 Get A/D filter: -9.255963e+061 result=40 07:45:03 Get A/D value=-858993460 result=40 07:45:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:03 Parameters OK 07:45:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:03 Set A/D data flow result=40 07:45:03 Set A/D channel type result=40 07:45:03 Set A/D encoding result=40 07:45:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:03 Set channel filter=0.000000e+000 result=40 07:45:03 Config A/D Result=40 07:45:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:03 Get A/D filter: -9.255963e+061 result=40 07:45:03 Get A/D value=-858993460 result=40 07:45:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:03 Aux= 07:45:03 Message to Camera, serial 116779 queued 07:45:40 Received message from Master: op=PointingHead serial=116792 07:45:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:45:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:45:41 Point started: ret=0 07:45:41 point_skyscan result=0 07:45:41 Check angles 07:45:41 SkyScan query 07:45:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 07:45:42 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 07:45:42 Check angles 07:45:42 SkyScan query 07:45:43 SkyScan query done: ret=0 az=112.98<-7532 ze=-44.385<-14959 Statuses=0008 0009 07:45:43 Msec=750 True Az=112.98 Ze=-44.385 Az status=0008 Ze status=0009 07:45:43 Check angles 07:45:43 SkyScan query 07:45:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.745<-16383 Statuses=0008 0009 07:45:43 Msec=1500 True Az=112.995 Ze=-65.745 Az status=0008 Ze status=0009 07:45:44 Check angles 07:45:44 SkyScan query 07:45:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.7<-17780 Statuses=0008 0009 07:45:44 Msec=2250 True Az=112.995 Ze=-86.7 Az status=0008 Ze status=0009 07:45:44 Check angles 07:45:44 SkyScan query 07:45:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.685<-19179 Statuses=0008 0009 07:45:45 Msec=3000 True Az=112.995 Ze=-107.685 Az status=0008 Ze status=0009 07:45:45 Check angles 07:45:45 SkyScan query 07:45:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.09<-20606 Statuses=0008 0009 07:45:46 Msec=3750 True Az=112.995 Ze=-129.09 Az status=0008 Ze status=0009 07:45:46 Check angles 07:45:46 SkyScan query 07:45:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.06<-22004 Statuses=0008 0009 07:45:46 Msec=4500 True Az=112.995 Ze=-150.06 Az status=0008 Ze status=0009 07:45:47 Check angles 07:45:47 SkyScan query 07:45:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.91<-23394 Statuses=0008 0009 07:45:47 Msec=5250 True Az=112.995 Ze=-170.91 Az status=0008 Ze status=0009 07:45:47 Check angles 07:45:47 SkyScan query 07:45:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:45:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:45:48 Message to Master queued w/err=0: serial=116792 error=0 07:45:53 Received message from Master: op=Filter serial=116793 07:45:53 Color wheel filter change from 0 to 0 07:45:53 FLIGetFilterPos err=0 currentPosition=0 07:45:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:53 Filter is already there-color wheel unchanged 07:45:53 Received message from Master: op=Shutter serial=116794 07:45:53 Shutter LASER open 07:45:53 Received message from Camera: op=State serial=116796 07:45:53 GetSingleValue result=40 Value=cccccccc 07:45:53 SkyScan query 07:45:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:45:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:54 Parameters OK 07:45:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:54 Set A/D data flow result=40 07:45:54 Set A/D channel type result=40 07:45:54 Set A/D encoding result=40 07:45:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:54 Set channel filter=0.000000e+000 result=40 07:45:54 Config A/D Result=40 07:45:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:54 Get A/D filter: -9.255963e+061 result=40 07:45:54 Get A/D value=-858993460 result=40 07:45:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:54 Parameters OK 07:45:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:54 Set A/D data flow result=40 07:45:54 Set A/D channel type result=40 07:45:54 Set A/D encoding result=40 07:45:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:54 Set channel filter=0.000000e+000 result=40 07:45:54 Config A/D Result=40 07:45:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:54 Get A/D filter: -9.255963e+061 result=40 07:45:54 Get A/D value=-858993460 result=40 07:45:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:54 Aux= 07:45:54 Message to Camera, serial 116796 queued 07:46:02 Received message from Master: op=Shutter serial=116806 07:46:02 Shutter LASER close 07:46:03 Received message from Master: op=PointingHead serial=116810 07:46:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:46:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:46:03 Point started: ret=0 07:46:03 point_skyscan result=0 07:46:04 Check angles 07:46:04 SkyScan query 07:46:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.71<-21514 Statuses=0008 0009 07:46:04 Msec=0 True Az=112.995 Ze=-142.71 Az status=0008 Ze status=0009 07:46:05 Check angles 07:46:05 SkyScan query 07:46:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.29<-20086 Statuses=0008 0009 07:46:05 Msec=750 True Az=112.995 Ze=-121.29 Az status=0008 Ze status=0009 07:46:05 Check angles 07:46:05 SkyScan query 07:46:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.335<-18689 Statuses=0008 0009 07:46:06 Msec=1500 True Az=112.995 Ze=-100.335 Az status=0008 Ze status=0009 07:46:06 Check angles 07:46:06 SkyScan query 07:46:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.275<-17285 Statuses=0008 0009 07:46:07 Msec=2250 True Az=112.995 Ze=-79.275 Az status=0008 Ze status=0009 07:46:07 Check angles 07:46:07 SkyScan query 07:46:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.005<-15867 Statuses=0008 0009 07:46:07 Msec=3000 True Az=112.995 Ze=-58.005 Az status=0008 Ze status=0009 07:46:08 Check angles 07:46:08 SkyScan query 07:46:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.095<-14473 Statuses=0008 0009 07:46:08 Msec=3750 True Az=112.995 Ze=-37.095 Az status=0008 Ze status=0009 07:46:08 Check angles 07:46:08 SkyScan query 07:46:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.11<-13074 Statuses=0008 0009 07:46:09 Msec=4500 True Az=112.995 Ze=-16.11 Az status=0008 Ze status=0009 07:46:09 Check angles 07:46:09 SkyScan query 07:46:10 SkyScan query done: ret=0 az=112.995<-7533 ze=4.995<-11667 Statuses=0008 0009 07:46:10 Msec=5250 True Az=112.995 Ze=4.995 Az status=0008 Ze status=0009 07:46:10 Check angles 07:46:10 SkyScan query 07:46:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:46:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:46:11 Message to Master queued w/err=0: serial=116810 error=0 07:46:16 Received message from Master: op=Filter serial=116811 07:46:16 Color wheel filter change from 0 to 0 07:46:16 FLIGetFilterPos err=0 currentPosition=0 07:46:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:46:16 Filter is already there-color wheel unchanged 07:46:16 Received message from Master: op=Shutter serial=116812 07:46:16 Shutter LASER close 07:46:16 Received message from Camera: op=State serial=116814 07:46:16 GetSingleValue result=40 Value=cccccccc 07:46:16 SkyScan query 07:46:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:46:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:16 Parameters OK 07:46:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:16 Set A/D data flow result=40 07:46:16 Set A/D channel type result=40 07:46:16 Set A/D encoding result=40 07:46:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:16 Set channel filter=0.000000e+000 result=40 07:46:16 Config A/D Result=40 07:46:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:16 Get A/D filter: -9.255963e+061 result=40 07:46:16 Get A/D value=-858993460 result=40 07:46:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:16 Parameters OK 07:46:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:16 Set A/D data flow result=40 07:46:16 Set A/D channel type result=40 07:46:16 Set A/D encoding result=40 07:46:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:16 Set channel filter=0.000000e+000 result=40 07:46:16 Config A/D Result=40 07:46:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:16 Get A/D filter: -9.255963e+061 result=40 07:46:16 Get A/D value=-858993460 result=40 07:46:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:46:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:46:16 Aux= 07:46:16 Message to Camera, serial 116814 queued 07:46:53 Received message from Master: op=PointingHead serial=116827 07:46:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:46:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:46:54 Point started: ret=0 07:46:54 point_skyscan result=0 07:46:54 Check angles 07:46:54 SkyScan query 07:46:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:46:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:46:55 Message to Master queued w/err=0: serial=116827 error=0 07:47:00 Received message from Master: op=Filter serial=116828 07:47:00 Color wheel filter change from 0 to 0 07:47:00 FLIGetFilterPos err=0 currentPosition=0 07:47:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:00 Filter is already there-color wheel unchanged 07:47:00 Received message from Master: op=Shutter serial=116829 07:47:00 Shutter LASER close 07:47:00 Received message from Camera: op=State serial=116831 07:47:00 GetSingleValue result=40 Value=cccccccc 07:47:00 SkyScan query 07:47:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:47:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:01 Parameters OK 07:47:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:01 Set A/D data flow result=40 07:47:01 Set A/D channel type result=40 07:47:01 Set A/D encoding result=40 07:47:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:01 Set channel filter=0.000000e+000 result=40 07:47:01 Config A/D Result=40 07:47:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:01 Get A/D filter: -9.255963e+061 result=40 07:47:01 Get A/D value=-858993460 result=40 07:47:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:01 Parameters OK 07:47:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:01 Set A/D data flow result=40 07:47:01 Set A/D channel type result=40 07:47:01 Set A/D encoding result=40 07:47:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:01 Set channel filter=0.000000e+000 result=40 07:47:01 Config A/D Result=40 07:47:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:01 Get A/D filter: -9.255963e+061 result=40 07:47:01 Get A/D value=-858993460 result=40 07:47:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:01 Aux= 07:47:01 Message to Camera, serial 116831 queued 07:47:38 Received message from Master: op=PointingHead serial=116844 07:47:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:47:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:47:38 Point started: ret=0 07:47:38 point_skyscan result=0 07:47:39 Check angles 07:47:39 SkyScan query 07:47:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:47:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:47:39 Message to Master queued w/err=0: serial=116844 error=0 07:47:44 Received message from Master: op=Filter serial=116845 07:47:44 Color wheel filter change from 0 to 0 07:47:44 FLIGetFilterPos err=0 currentPosition=0 07:47:44 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:44 Filter is already there-color wheel unchanged 07:47:44 Received message from Master: op=Shutter serial=116846 07:47:44 Shutter LASER close 07:47:44 Received message from Camera: op=State serial=116848 07:47:44 GetSingleValue result=40 Value=cccccccc 07:47:44 SkyScan query 07:47:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:47:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:45 Parameters OK 07:47:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:45 Set A/D data flow result=40 07:47:45 Set A/D channel type result=40 07:47:45 Set A/D encoding result=40 07:47:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:45 Set channel filter=0.000000e+000 result=40 07:47:45 Config A/D Result=40 07:47:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:45 Get A/D filter: -9.255963e+061 result=40 07:47:45 Get A/D value=-858993460 result=40 07:47:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:45 Parameters OK 07:47:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:45 Set A/D data flow result=40 07:47:45 Set A/D channel type result=40 07:47:45 Set A/D encoding result=40 07:47:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:45 Set channel filter=0.000000e+000 result=40 07:47:45 Config A/D Result=40 07:47:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:45 Get A/D filter: -9.255963e+061 result=40 07:47:45 Get A/D value=-858993460 result=40 07:47:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:45 Aux= 07:47:45 Message to Camera, serial 116848 queued 07:48:22 Received message from Master: op=PointingHead serial=116861 07:48:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:48:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:48:22 Point started: ret=0 07:48:22 point_skyscan result=0 07:48:23 Check angles 07:48:23 SkyScan query 07:48:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:48:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:48:24 Message to Master queued w/err=0: serial=116861 error=0 07:48:29 Received message from Master: op=Filter serial=116862 07:48:29 Color wheel filter change from 0 to 0 07:48:29 FLIGetFilterPos err=0 currentPosition=0 07:48:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:48:29 Filter is already there-color wheel unchanged 07:48:29 Received message from Master: op=Shutter serial=116863 07:48:29 Shutter LASER close 07:48:29 Received message from Camera: op=State serial=116865 07:48:29 GetSingleValue result=40 Value=cccccccc 07:48:29 SkyScan query 07:48:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:48:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:29 Parameters OK 07:48:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:29 Set A/D data flow result=40 07:48:29 Set A/D channel type result=40 07:48:29 Set A/D encoding result=40 07:48:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:29 Set channel filter=0.000000e+000 result=40 07:48:29 Config A/D Result=40 07:48:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:29 Get A/D filter: -9.255963e+061 result=40 07:48:29 Get A/D value=-858993460 result=40 07:48:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:29 Parameters OK 07:48:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:29 Set A/D data flow result=40 07:48:29 Set A/D channel type result=40 07:48:29 Set A/D encoding result=40 07:48:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:29 Set channel filter=0.000000e+000 result=40 07:48:29 Config A/D Result=40 07:48:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:29 Get A/D filter: -9.255963e+061 result=40 07:48:29 Get A/D value=-858993460 result=40 07:48:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:48:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:48:29 Aux= 07:48:29 Message to Camera, serial 116865 queued 07:49:06 Received message from Master: op=PointingHead serial=116878 07:49:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:49:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:49:07 Point started: ret=0 07:49:07 point_skyscan result=0 07:49:07 Check angles 07:49:07 SkyScan query 07:49:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.58<-13572 Statuses=0008 0009 07:49:08 Msec=0 True Az=112.995 Ze=-23.58 Az status=0008 Ze status=0009 07:49:08 Check angles 07:49:08 SkyScan query 07:49:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 07:49:09 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 07:49:09 Check angles 07:49:09 SkyScan query 07:49:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.925<-16395 Statuses=0008 0009 07:49:09 Msec=1500 True Az=112.995 Ze=-65.925 Az status=0008 Ze status=0009 07:49:10 Check angles 07:49:10 SkyScan query 07:49:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.865<-17791 Statuses=0008 0009 07:49:10 Msec=2250 True Az=112.995 Ze=-86.865 Az status=0008 Ze status=0009 07:49:10 Check angles 07:49:10 SkyScan query 07:49:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.835<-19189 Statuses=0008 0009 07:49:11 Msec=3000 True Az=112.995 Ze=-107.835 Az status=0008 Ze status=0009 07:49:11 Check angles 07:49:11 SkyScan query 07:49:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.255<-20617 Statuses=0008 0009 07:49:12 Msec=3750 True Az=112.995 Ze=-129.255 Az status=0008 Ze status=0009 07:49:12 Check angles 07:49:12 SkyScan query 07:49:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.6<-22040 Statuses=0008 0009 07:49:12 Msec=4500 True Az=112.995 Ze=-150.6 Az status=0008 Ze status=0009 07:49:13 Check angles 07:49:13 SkyScan query 07:49:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.345<-23423 Statuses=0008 0009 07:49:13 Msec=5250 True Az=112.995 Ze=-171.345 Az status=0008 Ze status=0009 07:49:13 Check angles 07:49:13 SkyScan query 07:49:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:49:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:49:14 Message to Master queued w/err=0: serial=116878 error=0 07:49:19 Received message from Master: op=Filter serial=116879 07:49:19 Color wheel filter change from 0 to 0 07:49:19 FLIGetFilterPos err=0 currentPosition=0 07:49:19 FLIGetStepsRemaining err=0 RemainingSteps=0 07:49:19 Filter is already there-color wheel unchanged 07:49:19 Received message from Master: op=Shutter serial=116880 07:49:19 Shutter LASER open 07:49:19 Received message from Camera: op=State serial=116882 07:49:19 GetSingleValue result=40 Value=cccccccc 07:49:19 SkyScan query 07:49:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:49:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:20 Parameters OK 07:49:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:20 Set A/D data flow result=40 07:49:20 Set A/D channel type result=40 07:49:20 Set A/D encoding result=40 07:49:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:20 Set channel filter=0.000000e+000 result=40 07:49:20 Config A/D Result=40 07:49:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:20 Get A/D filter: -9.255963e+061 result=40 07:49:20 Get A/D value=-858993460 result=40 07:49:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:20 Parameters OK 07:49:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:20 Set A/D data flow result=40 07:49:20 Set A/D channel type result=40 07:49:20 Set A/D encoding result=40 07:49:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:20 Set channel filter=0.000000e+000 result=40 07:49:20 Config A/D Result=40 07:49:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:20 Get A/D filter: -9.255963e+061 result=40 07:49:20 Get A/D value=-858993460 result=40 07:49:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:49:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:49:20 Aux= 07:49:20 Message to Camera, serial 116882 queued 07:49:28 Received message from Master: op=Shutter serial=116892 07:49:28 Shutter LASER close 07:49:29 Received message from Master: op=PointingHead serial=116896 07:49:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:49:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:49:29 Point started: ret=0 07:49:29 point_skyscan result=0 07:49:30 Check angles 07:49:30 SkyScan query 07:49:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.58<-21572 Statuses=0008 0009 07:49:30 Msec=0 True Az=112.995 Ze=-143.58 Az status=0008 Ze status=0009 07:49:31 Check angles 07:49:31 SkyScan query 07:49:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.16<-20144 Statuses=0008 0009 07:49:31 Msec=750 True Az=112.995 Ze=-122.16 Az status=0008 Ze status=0009 07:49:31 Check angles 07:49:31 SkyScan query 07:49:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.22<-18748 Statuses=0008 0009 07:49:32 Msec=1500 True Az=112.995 Ze=-101.22 Az status=0008 Ze status=0009 07:49:32 Check angles 07:49:32 SkyScan query 07:49:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.25<-17350 Statuses=0008 0009 07:49:33 Msec=2250 True Az=112.995 Ze=-80.25 Az status=0008 Ze status=0009 07:49:33 Check angles 07:49:33 SkyScan query 07:49:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.845<-15923 Statuses=0008 0009 07:49:34 Msec=3000 True Az=112.995 Ze=-58.845 Az status=0008 Ze status=0009 07:49:34 Check angles 07:49:34 SkyScan query 07:49:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.455<-14497 Statuses=0008 0009 07:49:34 Msec=3750 True Az=112.995 Ze=-37.455 Az status=0008 Ze status=0009 07:49:34 Check angles 07:49:34 SkyScan query 07:49:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.47<-13098 Statuses=0008 0009 07:49:35 Msec=4500 True Az=112.995 Ze=-16.47 Az status=0008 Ze status=0009 07:49:35 Check angles 07:49:35 SkyScan query 07:49:36 SkyScan query done: ret=0 az=113.01<-7534 ze=4.395<-11707 Statuses=0008 0009 07:49:36 Msec=5250 True Az=113.01 Ze=4.395 Az status=0008 Ze status=0009 07:49:36 Check angles 07:49:36 SkyScan query 07:49:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:49:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:49:37 Message to Master queued w/err=0: serial=116896 error=0 07:49:42 Received message from Master: op=Filter serial=116897 07:49:42 Color wheel filter change from 0 to 0 07:49:42 FLIGetFilterPos err=0 currentPosition=0 07:49:42 FLIGetStepsRemaining err=0 RemainingSteps=0 07:49:42 Filter is already there-color wheel unchanged 07:49:42 Received message from Master: op=Shutter serial=116898 07:49:42 Shutter LASER close 07:49:42 Received message from Camera: op=State serial=116900 07:49:42 GetSingleValue result=40 Value=cccccccc 07:49:42 SkyScan query 07:49:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:49:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:42 Parameters OK 07:49:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:42 Set A/D data flow result=40 07:49:42 Set A/D channel type result=40 07:49:42 Set A/D encoding result=40 07:49:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:42 Set channel filter=0.000000e+000 result=40 07:49:42 Config A/D Result=40 07:49:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:42 Get A/D filter: -9.255963e+061 result=40 07:49:42 Get A/D value=-858993460 result=40 07:49:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:42 Parameters OK 07:49:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:42 Set A/D data flow result=40 07:49:42 Set A/D channel type result=40 07:49:42 Set A/D encoding result=40 07:49:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:42 Set channel filter=0.000000e+000 result=40 07:49:42 Config A/D Result=40 07:49:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:42 Get A/D filter: -9.255963e+061 result=40 07:49:42 Get A/D value=-858993460 result=40 07:49:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:49:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:49:42 Aux= 07:49:42 Message to Camera, serial 116900 queued 07:50:19 Received message from Master: op=PointingHead serial=116913 07:50:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:50:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:50:20 Point started: ret=0 07:50:20 point_skyscan result=0 07:50:20 Check angles 07:50:20 SkyScan query 07:50:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:50:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:50:21 Message to Master queued w/err=0: serial=116913 error=0 07:50:26 Received message from Master: op=Filter serial=116914 07:50:26 Color wheel filter change from 0 to 0 07:50:26 FLIGetFilterPos err=0 currentPosition=0 07:50:26 FLIGetStepsRemaining err=0 RemainingSteps=0 07:50:26 Filter is already there-color wheel unchanged 07:50:26 Received message from Master: op=Shutter serial=116915 07:50:26 Shutter LASER close 07:50:26 Received message from Camera: op=State serial=116917 07:50:26 GetSingleValue result=40 Value=cccccccc 07:50:26 SkyScan query 07:50:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:50:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:27 Parameters OK 07:50:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:27 Set A/D data flow result=40 07:50:27 Set A/D channel type result=40 07:50:27 Set A/D encoding result=40 07:50:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:27 Set channel filter=0.000000e+000 result=40 07:50:27 Config A/D Result=40 07:50:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:27 Get A/D filter: -9.255963e+061 result=40 07:50:27 Get A/D value=-858993460 result=40 07:50:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:27 Parameters OK 07:50:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:27 Set A/D data flow result=40 07:50:27 Set A/D channel type result=40 07:50:27 Set A/D encoding result=40 07:50:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:27 Set channel filter=0.000000e+000 result=40 07:50:27 Config A/D Result=40 07:50:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:27 Get A/D filter: -9.255963e+061 result=40 07:50:27 Get A/D value=-858993460 result=40 07:50:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:50:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:50:27 Aux= 07:50:27 Message to Camera, serial 116917 queued 07:51:03 Received message from Master: op=PointingHead serial=116929 07:51:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:51:03 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:51:03 Point started: ret=0 07:51:03 point_skyscan result=0 07:51:04 Check angles 07:51:04 SkyScan query 07:51:04 SkyScan query done: ret=0 az=135.99<-9066 ze=-6.51<-12434 Statuses=0009 0008 07:51:04 Msec=0 True Az=135.99 Ze=-6.51 Az status=0009 Ze status=0008 07:51:05 Check angles 07:51:05 SkyScan query 07:51:05 SkyScan query done: ret=0 az=153.795<-10253 ze=-6.495<-12433 Statuses=0009 0008 07:51:05 Msec=750 True Az=153.795 Ze=-6.495 Az status=0009 Ze status=0008 07:51:05 Check angles 07:51:05 SkyScan query 07:51:06 SkyScan query done: ret=0 az=171.21<-11414 ze=-6.495<-12433 Statuses=0009 0008 07:51:06 Msec=1500 True Az=171.21 Ze=-6.495 Az status=0009 Ze status=0008 07:51:06 Check angles 07:51:06 SkyScan query 07:51:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:51:07 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:51:07 Message to Master queued w/err=0: serial=116929 error=0 07:51:12 Received message from Master: op=Filter serial=116930 07:51:12 Color wheel filter change from 0 to 0 07:51:12 FLIGetFilterPos err=0 currentPosition=0 07:51:12 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:12 Filter is already there-color wheel unchanged 07:51:12 Received message from Master: op=Shutter serial=116931 07:51:12 Shutter LASER close 07:51:12 Received message from Camera: op=State serial=116933 07:51:12 GetSingleValue result=40 Value=cccccccc 07:51:12 SkyScan query 07:51:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:51:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:12 Parameters OK 07:51:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:12 Set A/D data flow result=40 07:51:12 Set A/D channel type result=40 07:51:12 Set A/D encoding result=40 07:51:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:12 Set channel filter=0.000000e+000 result=40 07:51:12 Config A/D Result=40 07:51:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:12 Get A/D filter: -9.255963e+061 result=40 07:51:12 Get A/D value=-858993460 result=40 07:51:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:12 Parameters OK 07:51:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:12 Set A/D data flow result=40 07:51:12 Set A/D channel type result=40 07:51:12 Set A/D encoding result=40 07:51:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:12 Set channel filter=0.000000e+000 result=40 07:51:12 Config A/D Result=40 07:51:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:12 Get A/D filter: -9.255963e+061 result=40 07:51:12 Get A/D value=-858993460 result=40 07:51:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:12 Aux= 07:51:12 Message to Camera, serial 116933 queued 07:51:49 Received message from Master: op=PointingHead serial=116946 07:51:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:51:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:51:50 Point started: ret=0 07:51:50 point_skyscan result=0 07:51:50 Check angles 07:51:50 SkyScan query 07:51:51 SkyScan query done: ret=0 az=152.97<-10198 ze=6.51<-11566 Statuses=0009 0008 07:51:51 Msec=0 True Az=152.97 Ze=6.51 Az status=0009 Ze status=0008 07:51:51 Check angles 07:51:51 SkyScan query 07:51:52 SkyScan query done: ret=0 az=135.555<-9037 ze=6.495<-11567 Statuses=0009 0008 07:51:52 Msec=750 True Az=135.555 Ze=6.495 Az status=0009 Ze status=0008 07:51:52 Check angles 07:51:52 SkyScan query 07:51:52 SkyScan query done: ret=0 az=118.065<-7871 ze=6.495<-11567 Statuses=0009 0008 07:51:52 Msec=1500 True Az=118.065 Ze=6.495 Az status=0009 Ze status=0008 07:51:53 Check angles 07:51:53 SkyScan query 07:51:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:51:53 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:51:53 Message to Master queued w/err=0: serial=116946 error=0 07:51:58 Received message from Master: op=Filter serial=116947 07:51:58 Color wheel filter change from 0 to 0 07:51:58 FLIGetFilterPos err=0 currentPosition=0 07:51:58 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:58 Filter is already there-color wheel unchanged 07:51:58 Received message from Master: op=Shutter serial=116948 07:51:58 Shutter LASER close 07:51:58 Received message from Camera: op=State serial=116950 07:51:58 GetSingleValue result=40 Value=cccccccc 07:51:58 SkyScan query 07:51:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:51:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:59 Parameters OK 07:51:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:59 Set A/D data flow result=40 07:51:59 Set A/D channel type result=40 07:51:59 Set A/D encoding result=40 07:51:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:59 Set channel filter=0.000000e+000 result=40 07:51:59 Config A/D Result=40 07:51:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:59 Get A/D filter: -9.255963e+061 result=40 07:51:59 Get A/D value=-858993460 result=40 07:51:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:59 Parameters OK 07:51:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:59 Set A/D data flow result=40 07:51:59 Set A/D channel type result=40 07:51:59 Set A/D encoding result=40 07:51:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:59 Set channel filter=0.000000e+000 result=40 07:51:59 Config A/D Result=40 07:51:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:59 Get A/D filter: -9.255963e+061 result=40 07:51:59 Get A/D value=-858993460 result=40 07:51:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:59 Aux= 07:51:59 Message to Camera, serial 116950 queued 07:52:36 Received message from Master: op=PointingHead serial=116963 07:52:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:52:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:52:36 Point started: ret=0 07:52:36 point_skyscan result=0 07:52:37 Check angles 07:52:37 SkyScan query 07:52:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 07:52:37 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 07:52:38 Check angles 07:52:38 SkyScan query 07:52:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 07:52:38 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 07:52:38 Check angles 07:52:38 SkyScan query 07:52:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 07:52:39 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 07:52:39 Check angles 07:52:39 SkyScan query 07:52:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.43<-17762 Statuses=0008 0009 07:52:40 Msec=2250 True Az=112.995 Ze=-86.43 Az status=0008 Ze status=0009 07:52:40 Check angles 07:52:40 SkyScan query 07:52:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.865<-19191 Statuses=0008 0009 07:52:41 Msec=3000 True Az=112.995 Ze=-107.865 Az status=0008 Ze status=0009 07:52:41 Check angles 07:52:41 SkyScan query 07:52:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.805<-20587 Statuses=0008 0009 07:52:41 Msec=3750 True Az=112.995 Ze=-128.805 Az status=0008 Ze status=0009 07:52:41 Check angles 07:52:41 SkyScan query 07:52:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.79<-21986 Statuses=0008 0009 07:52:42 Msec=4500 True Az=112.995 Ze=-149.79 Az status=0008 Ze status=0009 07:52:42 Check angles 07:52:42 SkyScan query 07:52:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.045<-23403 Statuses=0008 0009 07:52:43 Msec=5250 True Az=112.995 Ze=-171.045 Az status=0008 Ze status=0009 07:52:43 Check angles 07:52:43 SkyScan query 07:52:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:52:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:52:44 Message to Master queued w/err=0: serial=116963 error=0 07:52:49 Received message from Master: op=Filter serial=116964 07:52:49 Color wheel filter change from 0 to 0 07:52:49 FLIGetFilterPos err=0 currentPosition=0 07:52:49 FLIGetStepsRemaining err=0 RemainingSteps=0 07:52:49 Filter is already there-color wheel unchanged 07:52:49 Received message from Master: op=Shutter serial=116965 07:52:49 Shutter LASER open 07:52:49 Received message from Camera: op=State serial=116967 07:52:49 GetSingleValue result=40 Value=cccccccc 07:52:49 SkyScan query 07:52:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:52:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:49 Parameters OK 07:52:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:49 Set A/D data flow result=40 07:52:49 Set A/D channel type result=40 07:52:49 Set A/D encoding result=40 07:52:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:49 Set channel filter=0.000000e+000 result=40 07:52:49 Config A/D Result=40 07:52:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:49 Get A/D filter: -9.255963e+061 result=40 07:52:49 Get A/D value=-858993460 result=40 07:52:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:49 Parameters OK 07:52:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:49 Set A/D data flow result=40 07:52:49 Set A/D channel type result=40 07:52:49 Set A/D encoding result=40 07:52:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:49 Set channel filter=0.000000e+000 result=40 07:52:49 Config A/D Result=40 07:52:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:49 Get A/D filter: -9.255963e+061 result=40 07:52:49 Get A/D value=-858993460 result=40 07:52:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:52:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:52:49 Aux= 07:52:49 Message to Camera, serial 116967 queued 07:52:58 Received message from Master: op=Shutter serial=116977 07:52:58 Shutter LASER close 07:52:58 Received message from Master: op=PointingHead serial=116981 07:52:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:52:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:52:59 Point started: ret=0 07:52:59 point_skyscan result=0 07:52:59 Check angles 07:52:59 SkyScan query 07:53:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.115<-21541 Statuses=0008 0009 07:53:00 Msec=0 True Az=112.995 Ze=-143.115 Az status=0008 Ze status=0009 07:53:00 Check angles 07:53:00 SkyScan query 07:53:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 07:53:01 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 07:53:01 Check angles 07:53:01 SkyScan query 07:53:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.22<-18748 Statuses=0008 0009 07:53:01 Msec=1500 True Az=112.995 Ze=-101.22 Az status=0008 Ze status=0009 07:53:02 Check angles 07:53:02 SkyScan query 07:53:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.265<-17351 Statuses=0008 0009 07:53:02 Msec=2250 True Az=112.995 Ze=-80.265 Az status=0008 Ze status=0009 07:53:02 Check angles 07:53:02 SkyScan query 07:53:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.325<-15955 Statuses=0008 0009 07:53:03 Msec=3000 True Az=112.995 Ze=-59.325 Az status=0008 Ze status=0009 07:53:03 Check angles 07:53:03 SkyScan query 07:53:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.845<-14523 Statuses=0008 0009 07:53:04 Msec=3750 True Az=112.995 Ze=-37.845 Az status=0008 Ze status=0009 07:53:04 Check angles 07:53:04 SkyScan query 07:53:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.89<-13126 Statuses=0008 0009 07:53:04 Msec=4500 True Az=112.995 Ze=-16.89 Az status=0008 Ze status=0009 07:53:05 Check angles 07:53:05 SkyScan query 07:53:05 SkyScan query done: ret=0 az=112.995<-7533 ze=4.05<-11730 Statuses=0008 0009 07:53:05 Msec=5250 True Az=112.995 Ze=4.05 Az status=0008 Ze status=0009 07:53:05 Check angles 07:53:05 SkyScan query 07:53:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:53:06 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:53:06 Message to Master queued w/err=0: serial=116981 error=0 07:53:11 Received message from Master: op=Filter serial=116982 07:53:11 Color wheel filter change from 0 to 0 07:53:11 FLIGetFilterPos err=0 currentPosition=0 07:53:11 FLIGetStepsRemaining err=0 RemainingSteps=0 07:53:11 Filter is already there-color wheel unchanged 07:53:11 Received message from Master: op=Shutter serial=116983 07:53:11 Shutter LASER close 07:53:11 Received message from Camera: op=State serial=116985 07:53:11 GetSingleValue result=40 Value=cccccccc 07:53:11 SkyScan query 07:53:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:53:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:12 Parameters OK 07:53:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:12 Set A/D data flow result=40 07:53:12 Set A/D channel type result=40 07:53:12 Set A/D encoding result=40 07:53:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:12 Set channel filter=0.000000e+000 result=40 07:53:12 Config A/D Result=40 07:53:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:12 Get A/D filter: -9.255963e+061 result=40 07:53:12 Get A/D value=-858993460 result=40 07:53:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:12 Parameters OK 07:53:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:12 Set A/D data flow result=40 07:53:12 Set A/D channel type result=40 07:53:12 Set A/D encoding result=40 07:53:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:12 Set channel filter=0.000000e+000 result=40 07:53:12 Config A/D Result=40 07:53:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:12 Get A/D filter: -9.255963e+061 result=40 07:53:12 Get A/D value=-858993460 result=40 07:53:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:53:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:53:12 Aux= 07:53:12 Message to Camera, serial 116985 queued 07:53:49 Received message from Master: op=PointingHead serial=116998 07:53:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:53:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:53:49 Point started: ret=0 07:53:49 point_skyscan result=0 07:53:50 Check angles 07:53:50 SkyScan query 07:53:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:53:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:53:50 Message to Master queued w/err=0: serial=116998 error=0 07:53:55 Received message from Master: op=Filter serial=116999 07:53:55 Color wheel filter change from 0 to 0 07:53:55 FLIGetFilterPos err=0 currentPosition=0 07:53:55 FLIGetStepsRemaining err=0 RemainingSteps=0 07:53:55 Filter is already there-color wheel unchanged 07:53:56 Received message from Master: op=Shutter serial=117000 07:53:56 Shutter LASER close 07:53:56 Received message from Camera: op=State serial=117002 07:53:56 GetSingleValue result=40 Value=cccccccc 07:53:56 SkyScan query 07:53:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:53:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:56 Parameters OK 07:53:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:56 Set A/D data flow result=40 07:53:56 Set A/D channel type result=40 07:53:56 Set A/D encoding result=40 07:53:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:56 Set channel filter=0.000000e+000 result=40 07:53:56 Config A/D Result=40 07:53:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:56 Get A/D filter: -9.255963e+061 result=40 07:53:56 Get A/D value=-858993460 result=40 07:53:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:56 Parameters OK 07:53:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:56 Set A/D data flow result=40 07:53:56 Set A/D channel type result=40 [UTC 2019-3-5 07:53:56] 07:53:56 Set A/D encoding result=40 07:53:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:56 Set channel filter=0.000000e+000 result=40 07:53:56 Config A/D Result=40 07:53:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:56 Get A/D filter: -9.255963e+061 result=40 07:53:56 Get A/D value=-858993460 result=40 07:53:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:53:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:53:56 Aux= 07:53:56 Message to Camera, serial 117002 queued 07:54:33 Received message from Master: op=PointingHead serial=117015 07:54:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:54:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:54:33 Point started: ret=0 07:54:33 point_skyscan result=0 07:54:34 Check angles 07:54:34 SkyScan query 07:54:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:54:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:54:35 Message to Master queued w/err=0: serial=117015 error=0 07:54:40 Received message from Master: op=Filter serial=117016 07:54:40 Color wheel filter change from 0 to 0 07:54:40 FLIGetFilterPos err=0 currentPosition=0 07:54:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:40 Filter is already there-color wheel unchanged 07:54:40 Received message from Master: op=Shutter serial=117017 07:54:40 Shutter LASER close 07:54:40 Received message from Camera: op=State serial=117019 07:54:40 GetSingleValue result=40 Value=cccccccc 07:54:40 SkyScan query 07:54:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:54:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:40 Parameters OK 07:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:40 Set A/D data flow result=40 07:54:40 Set A/D channel type result=40 07:54:40 Set A/D encoding result=40 07:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:40 Set channel filter=0.000000e+000 result=40 07:54:40 Config A/D Result=40 07:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:40 Get A/D filter: -9.255963e+061 result=40 07:54:40 Get A/D value=-858993460 result=40 07:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:40 Parameters OK 07:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:40 Set A/D data flow result=40 07:54:40 Set A/D channel type result=40 07:54:40 Set A/D encoding result=40 07:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:40 Set channel filter=0.000000e+000 result=40 07:54:40 Config A/D Result=40 07:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:40 Get A/D filter: -9.255963e+061 result=40 07:54:40 Get A/D value=-858993460 result=40 07:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:40 Aux= 07:54:40 Message to Camera, serial 117019 queued 07:55:17 Received message from Master: op=PointingHead serial=117032 07:55:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:55:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:55:18 Point started: ret=0 07:55:18 point_skyscan result=0 07:55:18 Check angles 07:55:18 SkyScan query 07:55:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:55:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:55:19 Message to Master queued w/err=0: serial=117032 error=0 07:55:24 Received message from Master: op=Filter serial=117033 07:55:24 Color wheel filter change from 0 to 0 07:55:24 FLIGetFilterPos err=0 currentPosition=0 07:55:24 FLIGetStepsRemaining err=0 RemainingSteps=0 07:55:24 Filter is already there-color wheel unchanged 07:55:24 Received message from Master: op=Shutter serial=117034 07:55:24 Shutter LASER close 07:55:24 Received message from Camera: op=State serial=117036 07:55:24 GetSingleValue result=40 Value=cccccccc 07:55:24 SkyScan query 07:55:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:55:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:25 Parameters OK 07:55:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:25 Set A/D data flow result=40 07:55:25 Set A/D channel type result=40 07:55:25 Set A/D encoding result=40 07:55:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:25 Set channel filter=0.000000e+000 result=40 07:55:25 Config A/D Result=40 07:55:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:25 Get A/D filter: -9.255963e+061 result=40 07:55:25 Get A/D value=-858993460 result=40 07:55:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:25 Parameters OK 07:55:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:25 Set A/D data flow result=40 07:55:25 Set A/D channel type result=40 07:55:25 Set A/D encoding result=40 07:55:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:25 Set channel filter=0.000000e+000 result=40 07:55:25 Config A/D Result=40 07:55:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:25 Get A/D filter: -9.255963e+061 result=40 07:55:25 Get A/D value=-858993460 result=40 07:55:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:55:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:55:25 Aux= 07:55:25 Message to Camera, serial 117036 queued 07:56:01 Received message from Master: op=PointingHead serial=117048 07:56:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:56:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:56:01 Point started: ret=0 07:56:01 point_skyscan result=0 07:56:02 Check angles 07:56:02 SkyScan query 07:56:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.655<-13577 Statuses=0008 0009 07:56:02 Msec=0 True Az=112.995 Ze=-23.655 Az status=0008 Ze status=0009 07:56:03 Check angles 07:56:03 SkyScan query 07:56:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 07:56:03 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 07:56:03 Check angles 07:56:03 SkyScan query 07:56:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-66<-16400 Statuses=0008 0009 07:56:04 Msec=1500 True Az=112.995 Ze=-66 Az status=0008 Ze status=0009 07:56:04 Check angles 07:56:04 SkyScan query 07:56:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.955<-17797 Statuses=0008 0009 07:56:05 Msec=2250 True Az=112.995 Ze=-86.955 Az status=0008 Ze status=0009 07:56:05 Check angles 07:56:05 SkyScan query 07:56:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.91<-19194 Statuses=0008 0009 07:56:05 Msec=3000 True Az=112.995 Ze=-107.91 Az status=0008 Ze status=0009 07:56:06 Check angles 07:56:06 SkyScan query 07:56:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.315<-20621 Statuses=0008 0009 07:56:06 Msec=3750 True Az=112.995 Ze=-129.315 Az status=0008 Ze status=0009 07:56:06 Check angles 07:56:06 SkyScan query 07:56:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.27<-22018 Statuses=0008 0009 07:56:07 Msec=4500 True Az=112.995 Ze=-150.27 Az status=0008 Ze status=0009 07:56:07 Check angles 07:56:07 SkyScan query 07:56:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.075<-23405 Statuses=0008 0009 07:56:08 Msec=5250 True Az=112.995 Ze=-171.075 Az status=0008 Ze status=0009 07:56:08 Check angles 07:56:08 SkyScan query 07:56:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:56:08 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:56:08 Message to Master queued w/err=0: serial=117048 error=0 07:56:13 Received message from Master: op=Filter serial=117049 07:56:13 Color wheel filter change from 0 to 0 07:56:13 FLIGetFilterPos err=0 currentPosition=0 07:56:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:56:13 Filter is already there-color wheel unchanged 07:56:14 Received message from Master: op=Shutter serial=117050 07:56:14 Shutter LASER open 07:56:14 Received message from Camera: op=State serial=117052 07:56:14 GetSingleValue result=40 Value=cccccccc 07:56:14 SkyScan query 07:56:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:56:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:14 Parameters OK 07:56:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:14 Set A/D data flow result=40 07:56:14 Set A/D channel type result=40 07:56:14 Set A/D encoding result=40 07:56:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:14 Set channel filter=0.000000e+000 result=40 07:56:14 Config A/D Result=40 07:56:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:14 Get A/D filter: -9.255963e+061 result=40 07:56:14 Get A/D value=-858993460 result=40 07:56:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:14 Parameters OK 07:56:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:14 Set A/D data flow result=40 07:56:14 Set A/D channel type result=40 07:56:14 Set A/D encoding result=40 07:56:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:14 Set channel filter=0.000000e+000 result=40 07:56:14 Config A/D Result=40 07:56:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:14 Get A/D filter: -9.255963e+061 result=40 07:56:14 Get A/D value=-858993460 result=40 07:56:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:56:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:56:14 Aux= 07:56:14 Message to Camera, serial 117052 queued 07:56:23 Received message from Master: op=Shutter serial=117062 07:56:23 Shutter LASER close 07:56:23 Received message from Master: op=PointingHead serial=117066 07:56:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:56:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:56:24 Point started: ret=0 07:56:24 point_skyscan result=0 07:56:24 Check angles 07:56:24 SkyScan query 07:56:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.295<-21553 Statuses=0008 0009 07:56:25 Msec=0 True Az=112.995 Ze=-143.295 Az status=0008 Ze status=0009 07:56:25 Check angles 07:56:25 SkyScan query 07:56:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.34<-20156 Statuses=0008 0009 07:56:26 Msec=750 True Az=112.995 Ze=-122.34 Az status=0008 Ze status=0009 07:56:26 Check angles 07:56:26 SkyScan query 07:56:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.385<-18759 Statuses=0008 0009 07:56:27 Msec=1500 True Az=112.995 Ze=-101.385 Az status=0008 Ze status=0009 07:56:27 Check angles 07:56:27 SkyScan query 07:56:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.415<-17361 Statuses=0008 0009 07:56:27 Msec=2250 True Az=112.995 Ze=-80.415 Az status=0008 Ze status=0009 07:56:27 Check angles 07:56:27 SkyScan query 07:56:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.025<-15935 Statuses=0008 0009 07:56:28 Msec=3000 True Az=112.995 Ze=-59.025 Az status=0008 Ze status=0009 07:56:28 Check angles 07:56:28 SkyScan query 07:56:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 07:56:29 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 07:56:29 Check angles 07:56:29 SkyScan query 07:56:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.07<-13138 Statuses=0008 0009 07:56:30 Msec=4500 True Az=112.995 Ze=-17.07 Az status=0008 Ze status=0009 07:56:30 Check angles 07:56:30 SkyScan query 07:56:30 SkyScan query done: ret=0 az=113.01<-7534 ze=4.275<-11715 Statuses=0008 0009 07:56:30 Msec=5250 True Az=113.01 Ze=4.275 Az status=0008 Ze status=0009 07:56:30 Check angles 07:56:30 SkyScan query 07:56:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:56:31 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:56:31 Message to Master queued w/err=0: serial=117066 error=0 07:56:36 Received message from Master: op=Filter serial=117067 07:56:36 Color wheel filter change from 0 to 0 07:56:36 FLIGetFilterPos err=0 currentPosition=0 07:56:36 FLIGetStepsRemaining err=0 RemainingSteps=0 07:56:36 Filter is already there-color wheel unchanged 07:56:36 Received message from Master: op=Shutter serial=117068 07:56:36 Shutter LASER close 07:56:36 Received message from Camera: op=State serial=117070 07:56:36 GetSingleValue result=40 Value=cccccccc 07:56:36 SkyScan query 07:56:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:56:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:37 Parameters OK 07:56:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:37 Set A/D data flow result=40 07:56:37 Set A/D channel type result=40 07:56:37 Set A/D encoding result=40 07:56:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:37 Set channel filter=0.000000e+000 result=40 07:56:37 Config A/D Result=40 07:56:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:37 Get A/D filter: -9.255963e+061 result=40 07:56:37 Get A/D value=-858993460 result=40 07:56:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:37 Parameters OK 07:56:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:37 Set A/D data flow result=40 07:56:37 Set A/D channel type result=40 07:56:37 Set A/D encoding result=40 07:56:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:37 Set channel filter=0.000000e+000 result=40 07:56:37 Config A/D Result=40 07:56:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:37 Get A/D filter: -9.255963e+061 result=40 07:56:37 Get A/D value=-858993460 result=40 07:56:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:56:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:56:37 Aux= 07:56:37 Message to Camera, serial 117070 queued 07:57:14 Received message from Master: op=PointingHead serial=117083 07:57:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:57:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:57:14 Point started: ret=0 07:57:14 point_skyscan result=0 07:57:15 Check angles 07:57:15 SkyScan query 07:57:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:57:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:57:15 Message to Master queued w/err=0: serial=117083 error=0 07:57:20 Received message from Master: op=Filter serial=117084 07:57:20 Color wheel filter change from 0 to 0 07:57:20 FLIGetFilterPos err=0 currentPosition=0 07:57:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:20 Filter is already there-color wheel unchanged 07:57:21 Received message from Master: op=Shutter serial=117085 07:57:21 Shutter LASER close 07:57:21 Received message from Camera: op=State serial=117087 07:57:21 GetSingleValue result=40 Value=cccccccc 07:57:21 SkyScan query 07:57:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:57:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:21 Parameters OK 07:57:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:21 Set A/D data flow result=40 07:57:21 Set A/D channel type result=40 07:57:21 Set A/D encoding result=40 07:57:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:21 Set channel filter=0.000000e+000 result=40 07:57:21 Config A/D Result=40 07:57:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:21 Get A/D filter: -9.255963e+061 result=40 07:57:21 Get A/D value=-858993460 result=40 07:57:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:21 Parameters OK 07:57:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:21 Set A/D data flow result=40 07:57:21 Set A/D channel type result=40 07:57:21 Set A/D encoding result=40 07:57:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:21 Set channel filter=0.000000e+000 result=40 07:57:21 Config A/D Result=40 07:57:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:21 Get A/D filter: -9.255963e+061 result=40 07:57:21 Get A/D value=-858993460 result=40 07:57:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:21 Aux= 07:57:21 Message to Camera, serial 117087 queued 07:57:58 Received message from Master: op=PointingHead serial=117100 07:57:58 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:57:58 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:57:58 Point started: ret=0 07:57:58 point_skyscan result=0 07:57:59 Check angles 07:57:59 SkyScan query 07:58:00 SkyScan query done: ret=0 az=135.75<-9050 ze=-6.51<-12434 Statuses=0009 0008 07:58:00 Msec=0 True Az=135.75 Ze=-6.51 Az status=0009 Ze status=0008 07:58:00 Check angles 07:58:00 SkyScan query 07:58:00 SkyScan query done: ret=0 az=153.33<-10222 ze=-6.495<-12433 Statuses=0009 0008 07:58:00 Msec=750 True Az=153.33 Ze=-6.495 Az status=0009 Ze status=0008 07:58:01 Check angles 07:58:01 SkyScan query 07:58:01 SkyScan query done: ret=0 az=171.03<-11402 ze=-6.495<-12433 Statuses=0009 0008 07:58:01 Msec=1500 True Az=171.03 Ze=-6.495 Az status=0009 Ze status=0008 07:58:01 Check angles 07:58:01 SkyScan query 07:58:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:58:02 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:58:02 Message to Master queued w/err=0: serial=117100 error=0 07:58:07 Received message from Master: op=Filter serial=117101 07:58:07 Color wheel filter change from 0 to 0 07:58:07 FLIGetFilterPos err=0 currentPosition=0 07:58:07 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:07 Filter is already there-color wheel unchanged 07:58:07 Received message from Master: op=Shutter serial=117102 07:58:07 Shutter LASER close 07:58:07 Received message from Camera: op=State serial=117104 07:58:07 GetSingleValue result=40 Value=cccccccc 07:58:07 SkyScan query 07:58:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:58:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:08 Parameters OK 07:58:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:08 Set A/D data flow result=40 07:58:08 Set A/D channel type result=40 07:58:08 Set A/D encoding result=40 07:58:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:08 Set channel filter=0.000000e+000 result=40 07:58:08 Config A/D Result=40 07:58:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:08 Get A/D filter: -9.255963e+061 result=40 07:58:08 Get A/D value=-858993460 result=40 07:58:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:08 Parameters OK 07:58:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:08 Set A/D data flow result=40 07:58:08 Set A/D channel type result=40 07:58:08 Set A/D encoding result=40 07:58:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:08 Set channel filter=0.000000e+000 result=40 07:58:08 Config A/D Result=40 07:58:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:08 Get A/D filter: -9.255963e+061 result=40 07:58:08 Get A/D value=-858993460 result=40 07:58:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:08 Aux= 07:58:08 Message to Camera, serial 117104 queued 07:58:45 Received message from Master: op=PointingHead serial=117117 07:58:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:58:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:58:45 Point started: ret=0 07:58:45 point_skyscan result=0 07:58:46 Check angles 07:58:46 SkyScan query 07:58:46 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 07:58:46 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 07:58:46 Check angles 07:58:46 SkyScan query 07:58:47 SkyScan query done: ret=0 az=135.57<-9038 ze=6.495<-11567 Statuses=0009 0008 07:58:47 Msec=750 True Az=135.57 Ze=6.495 Az status=0009 Ze status=0008 07:58:47 Check angles 07:58:47 SkyScan query 07:58:48 SkyScan query done: ret=0 az=118.155<-7877 ze=6.495<-11567 Statuses=0009 0008 07:58:48 Msec=1500 True Az=118.155 Ze=6.495 Az status=0009 Ze status=0008 07:58:48 Check angles 07:58:48 SkyScan query 07:58:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:58:49 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:58:49 Message to Master queued w/err=0: serial=117117 error=0 07:58:54 Received message from Master: op=Filter serial=117118 07:58:54 Color wheel filter change from 0 to 0 07:58:54 FLIGetFilterPos err=0 currentPosition=0 07:58:54 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:54 Filter is already there-color wheel unchanged 07:58:54 Received message from Master: op=Shutter serial=117119 07:58:54 Shutter LASER close 07:58:54 Received message from Camera: op=State serial=117121 07:58:54 GetSingleValue result=40 Value=cccccccc 07:58:54 SkyScan query 07:58:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:58:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:54 Parameters OK 07:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:54 Set A/D data flow result=40 07:58:54 Set A/D channel type result=40 07:58:54 Set A/D encoding result=40 07:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:54 Set channel filter=0.000000e+000 result=40 07:58:54 Config A/D Result=40 07:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:54 Get A/D filter: -9.255963e+061 result=40 07:58:54 Get A/D value=-858993460 result=40 07:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:54 Parameters OK 07:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:54 Set A/D data flow result=40 07:58:54 Set A/D channel type result=40 07:58:54 Set A/D encoding result=40 07:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:54 Set channel filter=0.000000e+000 result=40 07:58:54 Config A/D Result=40 07:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:54 Get A/D filter: -9.255963e+061 result=40 07:58:54 Get A/D value=-858993460 result=40 07:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:54 Aux= 07:58:54 Message to Camera, serial 117121 queued 07:59:31 Received message from Master: op=PointingHead serial=117134 07:59:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:59:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:59:31 Point started: ret=0 07:59:31 point_skyscan result=0 07:59:32 Check angles 07:59:32 SkyScan query 07:59:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 07:59:33 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 07:59:33 Check angles 07:59:33 SkyScan query 07:59:34 SkyScan query done: ret=0 az=112.98<-7532 ze=-44.325<-14955 Statuses=0008 0009 07:59:34 Msec=750 True Az=112.98 Ze=-44.325 Az status=0008 Ze status=0009 07:59:34 Check angles 07:59:34 SkyScan query 07:59:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.25<-16350 Statuses=0008 0009 07:59:34 Msec=1500 True Az=112.995 Ze=-65.25 Az status=0008 Ze status=0009 07:59:34 Check angles 07:59:34 SkyScan query 07:59:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.19<-17746 Statuses=0008 0009 07:59:35 Msec=2250 True Az=112.995 Ze=-86.19 Az status=0008 Ze status=0009 07:59:35 Check angles 07:59:35 SkyScan query 07:59:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.13<-19142 Statuses=0008 0009 07:59:36 Msec=3000 True Az=112.995 Ze=-107.13 Az status=0008 Ze status=0009 07:59:36 Check angles 07:59:36 SkyScan query 07:59:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.085<-20539 Statuses=0008 0009 07:59:37 Msec=3750 True Az=112.995 Ze=-128.085 Az status=0008 Ze status=0009 07:59:37 Check angles 07:59:37 SkyScan query 07:59:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.055<-21937 Statuses=0008 0009 07:59:37 Msec=4500 True Az=112.995 Ze=-149.055 Az status=0008 Ze status=0009 07:59:37 Check angles 07:59:37 SkyScan query 07:59:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.995<-23333 Statuses=0008 0009 07:59:38 Msec=5250 True Az=112.995 Ze=-169.995 Az status=0008 Ze status=0009 07:59:38 Check angles 07:59:38 SkyScan query 07:59:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:59:39 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:59:39 Message to Master queued w/err=0: serial=117134 error=0 07:59:44 Received message from Master: op=Filter serial=117135 07:59:44 Color wheel filter change from 0 to 0 07:59:44 FLIGetFilterPos err=0 currentPosition=0 07:59:44 FLIGetStepsRemaining err=0 RemainingSteps=0 07:59:44 Filter is already there-color wheel unchanged 07:59:44 Received message from Master: op=Shutter serial=117136 07:59:44 Shutter LASER open 07:59:44 Received message from Camera: op=State serial=117138 07:59:44 GetSingleValue result=40 Value=cccccccc 07:59:44 SkyScan query 07:59:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:59:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:45 Parameters OK 07:59:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:45 Set A/D data flow result=40 07:59:45 Set A/D channel type result=40 07:59:45 Set A/D encoding result=40 07:59:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:45 Set channel filter=0.000000e+000 result=40 07:59:45 Config A/D Result=40 07:59:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:45 Get A/D filter: -9.255963e+061 result=40 07:59:45 Get A/D value=-858993460 result=40 07:59:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:45 Parameters OK 07:59:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:45 Set A/D data flow result=40 07:59:45 Set A/D channel type result=40 07:59:45 Set A/D encoding result=40 07:59:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:45 Set channel filter=0.000000e+000 result=40 07:59:45 Config A/D Result=40 07:59:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:45 Get A/D filter: -9.255963e+061 result=40 07:59:45 Get A/D value=-858993460 result=40 07:59:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:59:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:59:45 Aux= 07:59:45 Message to Camera, serial 117138 queued 07:59:53 Received message from Master: op=Shutter serial=117148 07:59:53 Shutter LASER close 07:59:54 Received message from Master: op=PointingHead serial=117152 07:59:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:59:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:59:54 Point started: ret=0 07:59:54 point_skyscan result=0 07:59:55 Check angles 07:59:55 SkyScan query 07:59:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.905<-21527 Statuses=0008 0009 07:59:55 Msec=0 True Az=112.995 Ze=-142.905 Az status=0008 Ze status=0009 07:59:56 Check angles 07:59:56 SkyScan query 07:59:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.905<-20127 Statuses=0008 0009 07:59:56 Msec=750 True Az=112.995 Ze=-121.905 Az status=0008 Ze status=0009 07:59:56 Check angles 07:59:56 SkyScan query 07:59:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.5<-18700 Statuses=0008 0009 07:59:57 Msec=1500 True Az=112.995 Ze=-100.5 Az status=0008 Ze status=0009 07:59:57 Check angles 07:59:57 SkyScan query 07:59:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.53<-17302 Statuses=0008 0009 07:59:58 Msec=2250 True Az=112.995 Ze=-79.53 Az status=0008 Ze status=0009 07:59:58 Check angles 07:59:58 SkyScan query 07:59:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.575<-15905 Statuses=0008 0009 07:59:58 Msec=3000 True Az=112.995 Ze=-58.575 Az status=0008 Ze status=0009 07:59:59 Check angles 07:59:59 SkyScan query 07:59:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.245<-14483 Statuses=0008 0009 07:59:59 Msec=3750 True Az=112.995 Ze=-37.245 Az status=0008 Ze status=0009 07:59:59 Check angles 07:59:59 SkyScan query 08:00:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.855<-13057 Statuses=0008 0009 08:00:00 Msec=4500 True Az=112.995 Ze=-15.855 Az status=0008 Ze status=0009 08:00:00 Check angles 08:00:00 SkyScan query 08:00:01 SkyScan query done: ret=0 az=112.995<-7533 ze=4.86<-11676 Statuses=0008 0009 08:00:01 Msec=5250 True Az=112.995 Ze=4.86 Az status=0008 Ze status=0009 08:00:01 Check angles 08:00:01 SkyScan query 08:00:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:00:01 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:00:01 Message to Master queued w/err=0: serial=117152 error=0 08:00:06 Received message from Master: op=Filter serial=117153 08:00:06 Color wheel filter change from 0 to 0 08:00:06 FLIGetFilterPos err=0 currentPosition=0 08:00:06 FLIGetStepsRemaining err=0 RemainingSteps=0 08:00:06 Filter is already there-color wheel unchanged 08:00:07 Received message from Master: op=Shutter serial=117154 08:00:07 Shutter LASER close 08:00:07 Received message from Camera: op=State serial=117156 08:00:07 GetSingleValue result=40 Value=cccccccc 08:00:07 SkyScan query 08:00:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:00:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:07 Parameters OK 08:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:07 Set A/D data flow result=40 08:00:07 Set A/D channel type result=40 08:00:07 Set A/D encoding result=40 08:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:07 Set channel filter=0.000000e+000 result=40 08:00:07 Config A/D Result=40 08:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:07 Get A/D filter: -9.255963e+061 result=40 08:00:07 Get A/D value=-858993460 result=40 08:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:07 Parameters OK 08:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:07 Set A/D data flow result=40 08:00:07 Set A/D channel type result=40 08:00:07 Set A/D encoding result=40 08:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:07 Set channel filter=0.000000e+000 result=40 08:00:07 Config A/D Result=40 08:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:07 Get A/D filter: -9.255963e+061 result=40 08:00:07 Get A/D value=-858993460 result=40 08:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:00:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:00:07 Aux= 08:00:07 Message to Camera, serial 117156 queued 08:00:44 Received message from Master: op=PointingHead serial=117169 08:00:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:00:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:00:45 Point started: ret=0 08:00:45 point_skyscan result=0 08:00:45 Check angles 08:00:45 SkyScan query 08:00:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:00:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:00:46 Message to Master queued w/err=0: serial=117169 error=0 08:00:51 Received message from Master: op=Filter serial=117170 08:00:51 Color wheel filter change from 0 to 0 08:00:51 FLIGetFilterPos err=0 currentPosition=0 08:00:51 FLIGetStepsRemaining err=0 RemainingSteps=0 08:00:51 Filter is already there-color wheel unchanged 08:00:51 Received message from Master: op=Shutter serial=117171 08:00:51 Shutter LASER close 08:00:51 Received message from Camera: op=State serial=117173 08:00:51 GetSingleValue result=40 Value=cccccccc 08:00:51 SkyScan query 08:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:00:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:52 Parameters OK 08:00:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:52 Set A/D data flow result=40 08:00:52 Set A/D channel type result=40 08:00:52 Set A/D encoding result=40 08:00:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:52 Set channel filter=0.000000e+000 result=40 08:00:52 Config A/D Result=40 08:00:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:52 Get A/D filter: -9.255963e+061 result=40 08:00:52 Get A/D value=-858993460 result=40 08:00:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:52 Parameters OK 08:00:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:52 Set A/D data flow result=40 08:00:52 Set A/D channel type result=40 08:00:52 Set A/D encoding result=40 08:00:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:52 Set channel filter=0.000000e+000 result=40 08:00:52 Config A/D Result=40 08:00:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:52 Get A/D filter: -9.255963e+061 result=40 08:00:52 Get A/D value=-858993460 result=40 08:00:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:00:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:00:52 Aux= 08:00:52 Message to Camera, serial 117173 queued 08:01:29 Received message from Master: op=PointingHead serial=117186 08:01:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:01:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:01:29 Point started: ret=0 08:01:29 point_skyscan result=0 08:01:30 Check angles 08:01:30 SkyScan query 08:01:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:01:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:01:30 Message to Master queued w/err=0: serial=117186 error=0 08:01:35 Received message from Master: op=Filter serial=117187 08:01:35 Color wheel filter change from 0 to 0 08:01:35 FLIGetFilterPos err=0 currentPosition=0 08:01:35 FLIGetStepsRemaining err=0 RemainingSteps=0 08:01:35 Filter is already there-color wheel unchanged 08:01:35 Received message from Master: op=Shutter serial=117188 08:01:35 Shutter LASER close 08:01:35 Received message from Camera: op=State serial=117190 08:01:35 GetSingleValue result=40 Value=cccccccc 08:01:35 SkyScan query 08:01:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:01:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:36 Parameters OK 08:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:36 Set A/D data flow result=40 08:01:36 Set A/D channel type result=40 08:01:36 Set A/D encoding result=40 08:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:36 Set channel filter=0.000000e+000 result=40 08:01:36 Config A/D Result=40 08:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:36 Get A/D filter: -9.255963e+061 result=40 08:01:36 Get A/D value=-858993460 result=40 08:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:36 Parameters OK 08:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:36 Set A/D data flow result=40 08:01:36 Set A/D channel type result=40 08:01:36 Set A/D encoding result=40 08:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:36 Set channel filter=0.000000e+000 result=40 08:01:36 Config A/D Result=40 08:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:36 Get A/D filter: -9.255963e+061 result=40 08:01:36 Get A/D value=-858993460 result=40 08:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:01:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:01:36 Aux= 08:01:36 Message to Camera, serial 117190 queued 08:02:13 Received message from Master: op=PointingHead serial=117203 08:02:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:02:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:02:13 Point started: ret=0 08:02:13 point_skyscan result=0 08:02:14 Check angles 08:02:14 SkyScan query 08:02:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:02:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:02:14 Message to Master queued w/err=0: serial=117203 error=0 08:02:19 Received message from Master: op=Filter serial=117204 08:02:19 Color wheel filter change from 0 to 0 08:02:19 FLIGetFilterPos err=0 currentPosition=0 08:02:19 FLIGetStepsRemaining err=0 RemainingSteps=0 08:02:19 Filter is already there-color wheel unchanged 08:02:20 Received message from Master: op=Shutter serial=117205 08:02:20 Shutter LASER close 08:02:20 Received message from Camera: op=State serial=117207 08:02:20 GetSingleValue result=40 Value=cccccccc 08:02:20 SkyScan query 08:02:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:02:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:20 Parameters OK 08:02:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:20 Set A/D data flow result=40 08:02:20 Set A/D channel type result=40 08:02:20 Set A/D encoding result=40 08:02:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:20 Set channel filter=0.000000e+000 result=40 08:02:20 Config A/D Result=40 08:02:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:20 Get A/D filter: -9.255963e+061 result=40 08:02:20 Get A/D value=-858993460 result=40 08:02:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:20 Parameters OK 08:02:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:20 Set A/D data flow result=40 08:02:20 Set A/D channel type result=40 08:02:20 Set A/D encoding result=40 08:02:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:20 Set channel filter=0.000000e+000 result=40 08:02:20 Config A/D Result=40 08:02:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:20 Get A/D filter: -9.255963e+061 result=40 08:02:20 Get A/D value=-858993460 result=40 08:02:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:02:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:02:20 Aux= 08:02:20 Message to Camera, serial 117207 queued 08:02:57 Received message from Master: op=PointingHead serial=117220 08:02:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:02:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:02:57 Point started: ret=0 08:02:57 point_skyscan result=0 08:02:58 Check angles 08:02:58 SkyScan query 08:02:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.775<-13585 Statuses=0008 0009 08:02:59 Msec=0 True Az=112.995 Ze=-23.775 Az status=0008 Ze status=0009 08:02:59 Check angles 08:02:59 SkyScan query 08:03:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.135<-15009 Statuses=0008 0009 08:03:00 Msec=750 True Az=112.995 Ze=-45.135 Az status=0008 Ze status=0009 08:03:00 Check angles 08:03:00 SkyScan query 08:03:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.12<-16408 Statuses=0008 0009 08:03:00 Msec=1500 True Az=112.995 Ze=-66.12 Az status=0008 Ze status=0009 08:03:00 Check angles 08:03:00 SkyScan query 08:03:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.09<-17806 Statuses=0008 0009 08:03:01 Msec=2250 True Az=112.995 Ze=-87.09 Az status=0008 Ze status=0009 08:03:01 Check angles 08:03:01 SkyScan query 08:03:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.495<-19233 Statuses=0008 0009 08:03:02 Msec=3000 True Az=112.995 Ze=-108.495 Az status=0008 Ze status=0009 08:03:02 Check angles 08:03:02 SkyScan query 08:03:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.435<-20629 Statuses=0008 0009 08:03:03 Msec=3750 True Az=112.995 Ze=-129.435 Az status=0008 Ze status=0009 08:03:03 Check angles 08:03:03 SkyScan query 08:03:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.39<-22026 Statuses=0008 0009 08:03:03 Msec=4500 True Az=112.995 Ze=-150.39 Az status=0008 Ze status=0009 08:03:03 Check angles 08:03:03 SkyScan query 08:03:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0008 0009 08:03:04 Msec=5250 True Az=112.995 Ze=-171.45 Az status=0008 Ze status=0009 08:03:04 Check angles 08:03:04 SkyScan query 08:03:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:03:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:03:05 Message to Master queued w/err=0: serial=117220 error=0 08:03:10 Received message from Master: op=Filter serial=117221 08:03:10 Color wheel filter change from 0 to 0 08:03:10 FLIGetFilterPos err=0 currentPosition=0 08:03:10 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:10 Filter is already there-color wheel unchanged 08:03:10 Received message from Master: op=Shutter serial=117222 08:03:10 Shutter LASER open 08:03:10 Received message from Camera: op=State serial=117224 08:03:10 GetSingleValue result=40 Value=cccccccc 08:03:10 SkyScan query 08:03:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:03:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:11 Parameters OK 08:03:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:11 Set A/D data flow result=40 08:03:11 Set A/D channel type result=40 08:03:11 Set A/D encoding result=40 08:03:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:11 Set channel filter=0.000000e+000 result=40 08:03:11 Config A/D Result=40 08:03:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:11 Get A/D filter: -9.255963e+061 result=40 08:03:11 Get A/D value=-858993460 result=40 08:03:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:11 Parameters OK 08:03:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:11 Set A/D data flow result=40 08:03:11 Set A/D channel type result=40 08:03:11 Set A/D encoding result=40 08:03:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:11 Set channel filter=0.000000e+000 result=40 08:03:11 Config A/D Result=40 08:03:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:11 Get A/D filter: -9.255963e+061 result=40 08:03:11 Get A/D value=-858993460 result=40 08:03:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:11 Aux= 08:03:11 Message to Camera, serial 117224 queued 08:03:19 Received message from Master: op=Shutter serial=117234 08:03:19 Shutter LASER close 08:03:20 Received message from Master: op=PointingHead serial=117238 08:03:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:03:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:03:20 Point started: ret=0 08:03:20 point_skyscan result=0 08:03:21 Check angles 08:03:21 SkyScan query 08:03:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 08:03:21 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 08:03:22 Check angles 08:03:22 SkyScan query 08:03:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 08:03:22 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 08:03:22 Check angles 08:03:22 SkyScan query 08:03:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.55<-18770 Statuses=0008 0009 08:03:23 Msec=1500 True Az=112.995 Ze=-101.55 Az status=0008 Ze status=0009 08:03:23 Check angles 08:03:23 SkyScan query 08:03:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 08:03:24 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 08:03:24 Check angles 08:03:24 SkyScan query 08:03:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 08:03:24 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 08:03:25 Check angles 08:03:25 SkyScan query 08:03:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 08:03:25 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 08:03:25 Check angles 08:03:25 SkyScan query 08:03:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.8<-13120 Statuses=0008 0009 08:03:26 Msec=4500 True Az=112.995 Ze=-16.8 Az status=0008 Ze status=0009 08:03:26 Check angles 08:03:26 SkyScan query 08:03:27 SkyScan query done: ret=0 az=112.995<-7533 ze=4.14<-11724 Statuses=0008 0009 08:03:27 Msec=5250 True Az=112.995 Ze=4.14 Az status=0008 Ze status=0009 08:03:27 Check angles 08:03:27 SkyScan query 08:03:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:03:27 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:03:27 Message to Master queued w/err=0: serial=117238 error=0 08:03:32 Received message from Master: op=Filter serial=117239 08:03:32 Color wheel filter change from 0 to 0 08:03:32 FLIGetFilterPos err=0 currentPosition=0 08:03:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:32 Filter is already there-color wheel unchanged 08:03:33 Received message from Master: op=Shutter serial=117240 08:03:33 Shutter LASER close 08:03:33 Received message from Camera: op=State serial=117242 08:03:33 GetSingleValue result=40 Value=cccccccc 08:03:33 SkyScan query 08:03:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:03:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:33 Parameters OK 08:03:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:33 Set A/D data flow result=40 08:03:33 Set A/D channel type result=40 08:03:33 Set A/D encoding result=40 08:03:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:33 Set channel filter=0.000000e+000 result=40 08:03:33 Config A/D Result=40 08:03:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:33 Get A/D filter: -9.255963e+061 result=40 08:03:33 Get A/D value=-858993460 result=40 08:03:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:33 Parameters OK 08:03:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:33 Set A/D data flow result=40 08:03:33 Set A/D channel type result=40 08:03:33 Set A/D encoding result=40 08:03:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:33 Set channel filter=0.000000e+000 result=40 08:03:33 Config A/D Result=40 08:03:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:33 Get A/D filter: -9.255963e+061 result=40 08:03:33 Get A/D value=-858993460 result=40 08:03:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:33 Aux= 08:03:33 Message to Camera, serial 117242 queued 08:03:38 Received message from Master: op=Identify serial=117243 [UTC 2019-3-5 08:03:50] 08:04:10 Received message from Master: op=PointingHead serial=117258 08:04:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:04:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:04:11 Point started: ret=0 08:04:11 point_skyscan result=0 08:04:11 Check angles 08:04:11 SkyScan query 08:04:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:04:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:04:12 Message to Master queued w/err=0: serial=117258 error=0 08:04:17 Received message from Master: op=Filter serial=117259 08:04:17 Color wheel filter change from 0 to 0 08:04:17 FLIGetFilterPos err=0 currentPosition=0 08:04:17 FLIGetStepsRemaining err=0 RemainingSteps=0 08:04:17 Filter is already there-color wheel unchanged 08:04:17 Received message from Master: op=Shutter serial=117260 08:04:17 Shutter LASER close 08:04:17 Received message from Camera: op=State serial=117262 08:04:17 GetSingleValue result=40 Value=cccccccc 08:04:17 SkyScan query 08:04:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:04:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:18 Parameters OK 08:04:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:18 Set A/D data flow result=40 08:04:18 Set A/D channel type result=40 08:04:18 Set A/D encoding result=40 08:04:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:18 Set channel filter=0.000000e+000 result=40 08:04:18 Config A/D Result=40 08:04:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:18 Get A/D filter: -9.255963e+061 result=40 08:04:18 Get A/D value=-858993460 result=40 08:04:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:18 Parameters OK 08:04:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:18 Set A/D data flow result=40 08:04:18 Set A/D channel type result=40 08:04:18 Set A/D encoding result=40 08:04:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:18 Set channel filter=0.000000e+000 result=40 08:04:18 Config A/D Result=40 08:04:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:18 Get A/D filter: -9.255963e+061 result=40 08:04:18 Get A/D value=-858993460 result=40 08:04:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:04:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:04:18 Aux= 08:04:18 Message to Camera, serial 117262 queued 08:04:54 Received message from Master: op=PointingHead serial=117274 08:04:54 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:04:54 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:04:54 Point started: ret=0 08:04:54 point_skyscan result=0 08:04:55 Check angles 08:04:55 SkyScan query 08:04:55 SkyScan query done: ret=0 az=135.855<-9057 ze=-6.51<-12434 Statuses=0009 0008 08:04:55 Msec=0 True Az=135.855 Ze=-6.51 Az status=0009 Ze status=0008 08:04:55 Check angles 08:04:55 SkyScan query 08:04:56 SkyScan query done: ret=0 az=153.33<-10222 ze=-6.495<-12433 Statuses=0009 0008 08:04:56 Msec=750 True Az=153.33 Ze=-6.495 Az status=0009 Ze status=0008 08:04:56 Check angles 08:04:56 SkyScan query 08:04:57 SkyScan query done: ret=0 az=170.79<-11386 ze=-6.495<-12433 Statuses=0009 0008 08:04:57 Msec=1500 True Az=170.79 Ze=-6.495 Az status=0009 Ze status=0008 08:04:57 Check angles 08:04:57 SkyScan query 08:04:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:04:57 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:04:57 Message to Master queued w/err=0: serial=117274 error=0 08:05:02 Received message from Master: op=Filter serial=117275 08:05:02 Color wheel filter change from 0 to 0 08:05:02 FLIGetFilterPos err=0 currentPosition=0 08:05:02 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:02 Filter is already there-color wheel unchanged 08:05:03 Received message from Master: op=Shutter serial=117276 08:05:03 Shutter LASER close 08:05:03 Received message from Camera: op=State serial=117278 08:05:03 GetSingleValue result=40 Value=cccccccc 08:05:03 SkyScan query 08:05:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:05:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:03 Parameters OK 08:05:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:03 Set A/D data flow result=40 08:05:03 Set A/D channel type result=40 08:05:03 Set A/D encoding result=40 08:05:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:03 Set channel filter=0.000000e+000 result=40 08:05:03 Config A/D Result=40 08:05:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:03 Get A/D filter: -9.255963e+061 result=40 08:05:03 Get A/D value=-858993460 result=40 08:05:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:03 Parameters OK 08:05:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:03 Set A/D data flow result=40 08:05:03 Set A/D channel type result=40 08:05:03 Set A/D encoding result=40 08:05:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:03 Set channel filter=0.000000e+000 result=40 08:05:03 Config A/D Result=40 08:05:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:03 Get A/D filter: -9.255963e+061 result=40 08:05:03 Get A/D value=-858993460 result=40 08:05:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:03 Aux= 08:05:03 Message to Camera, serial 117278 queued 08:05:40 Received message from Master: op=PointingHead serial=117291 08:05:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:05:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:05:40 Point started: ret=0 08:05:40 point_skyscan result=0 08:05:41 Check angles 08:05:41 SkyScan query 08:05:42 SkyScan query done: ret=0 az=153.285<-10219 ze=6.51<-11566 Statuses=0009 0008 08:05:42 Msec=0 True Az=153.285 Ze=6.51 Az status=0009 Ze status=0008 08:05:42 Check angles 08:05:42 SkyScan query 08:05:42 SkyScan query done: ret=0 az=135.315<-9021 ze=6.495<-11567 Statuses=0009 0008 08:05:42 Msec=750 True Az=135.315 Ze=6.495 Az status=0009 Ze status=0008 08:05:43 Check angles 08:05:43 SkyScan query 08:05:43 SkyScan query done: ret=0 az=117.84<-7856 ze=6.495<-11567 Statuses=0009 0008 08:05:43 Msec=1500 True Az=117.84 Ze=6.495 Az status=0009 Ze status=0008 08:05:43 Check angles 08:05:43 SkyScan query 08:05:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:05:44 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:05:44 Message to Master queued w/err=0: serial=117291 error=0 08:05:49 Received message from Master: op=Filter serial=117292 08:05:49 Color wheel filter change from 0 to 0 08:05:49 FLIGetFilterPos err=0 currentPosition=0 08:05:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:49 Filter is already there-color wheel unchanged 08:05:49 Received message from Master: op=Shutter serial=117293 08:05:49 Shutter LASER close 08:05:49 Received message from Camera: op=State serial=117295 08:05:49 GetSingleValue result=40 Value=cccccccc 08:05:49 SkyScan query 08:05:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:05:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:50 Parameters OK 08:05:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:50 Set A/D data flow result=40 08:05:50 Set A/D channel type result=40 08:05:50 Set A/D encoding result=40 08:05:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:50 Set channel filter=0.000000e+000 result=40 08:05:50 Config A/D Result=40 08:05:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:50 Get A/D filter: -9.255963e+061 result=40 08:05:50 Get A/D value=-858993460 result=40 08:05:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:50 Parameters OK 08:05:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:50 Set A/D data flow result=40 08:05:50 Set A/D channel type result=40 08:05:50 Set A/D encoding result=40 08:05:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:50 Set channel filter=0.000000e+000 result=40 08:05:50 Config A/D Result=40 08:05:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:50 Get A/D filter: -9.255963e+061 result=40 08:05:50 Get A/D value=-858993460 result=40 08:05:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:50 Aux= 08:05:50 Message to Camera, serial 117295 queued 08:06:27 Received message from Master: op=PointingHead serial=117308 08:06:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:06:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:06:27 Point started: ret=0 08:06:27 point_skyscan result=0 08:06:28 Check angles 08:06:28 SkyScan query 08:06:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.04<-13536 Statuses=0008 0009 08:06:28 Msec=0 True Az=112.995 Ze=-23.04 Az status=0008 Ze status=0009 08:06:28 Check angles 08:06:28 SkyScan query 08:06:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 08:06:29 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 08:06:29 Check angles 08:06:29 SkyScan query 08:06:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 08:06:30 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 08:06:30 Check angles 08:06:30 SkyScan query 08:06:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.295<-17753 Statuses=0008 0009 08:06:31 Msec=2250 True Az=112.995 Ze=-86.295 Az status=0008 Ze status=0009 08:06:31 Check angles 08:06:31 SkyScan query 08:06:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.235<-19149 Statuses=0008 0009 08:06:31 Msec=3000 True Az=112.995 Ze=-107.235 Az status=0008 Ze status=0009 08:06:31 Check angles 08:06:31 SkyScan query 08:06:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.19<-20546 Statuses=0008 0009 08:06:32 Msec=3750 True Az=112.995 Ze=-128.19 Az status=0008 Ze status=0009 08:06:32 Check angles 08:06:32 SkyScan query 08:06:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.175<-21945 Statuses=0008 0009 08:06:33 Msec=4500 True Az=112.995 Ze=-149.175 Az status=0008 Ze status=0009 08:06:33 Check angles 08:06:33 SkyScan query 08:06:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.1<-23340 Statuses=0008 0009 08:06:34 Msec=5250 True Az=112.995 Ze=-170.1 Az status=0008 Ze status=0009 08:06:34 Check angles 08:06:34 SkyScan query 08:06:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:06:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:06:34 Message to Master queued w/err=0: serial=117308 error=0 08:06:39 Received message from Master: op=Filter serial=117309 08:06:39 Color wheel filter change from 0 to 0 08:06:39 FLIGetFilterPos err=0 currentPosition=0 08:06:39 FLIGetStepsRemaining err=0 RemainingSteps=0 08:06:39 Filter is already there-color wheel unchanged 08:06:39 Received message from Master: op=Shutter serial=117310 08:06:39 Shutter LASER open 08:06:40 Received message from Camera: op=State serial=117312 08:06:40 GetSingleValue result=40 Value=cccccccc 08:06:40 SkyScan query 08:06:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:06:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:40 Parameters OK 08:06:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:40 Set A/D data flow result=40 08:06:40 Set A/D channel type result=40 08:06:40 Set A/D encoding result=40 08:06:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:40 Set channel filter=0.000000e+000 result=40 08:06:40 Config A/D Result=40 08:06:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:40 Get A/D filter: -9.255963e+061 result=40 08:06:40 Get A/D value=-858993460 result=40 08:06:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:40 Parameters OK 08:06:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:40 Set A/D data flow result=40 08:06:40 Set A/D channel type result=40 08:06:40 Set A/D encoding result=40 08:06:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:40 Set channel filter=0.000000e+000 result=40 08:06:40 Config A/D Result=40 08:06:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:40 Get A/D filter: -9.255963e+061 result=40 08:06:40 Get A/D value=-858993460 result=40 08:06:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:06:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:06:40 Aux= 08:06:40 Message to Camera, serial 117312 queued 08:06:49 Received message from Master: op=Shutter serial=117322 08:06:49 Shutter LASER close 08:06:49 Received message from Master: op=PointingHead serial=117326 08:06:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:06:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:06:50 Point started: ret=0 08:06:50 point_skyscan result=0 08:06:50 Check angles 08:06:50 SkyScan query 08:06:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 08:06:51 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 08:06:51 Check angles 08:06:51 SkyScan query 08:06:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.59<-20106 Statuses=0008 0009 08:06:52 Msec=750 True Az=112.995 Ze=-121.59 Az status=0008 Ze status=0009 08:06:52 Check angles 08:06:52 SkyScan query 08:06:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.665<-18711 Statuses=0008 0009 08:06:52 Msec=1500 True Az=112.995 Ze=-100.665 Az status=0008 Ze status=0009 08:06:53 Check angles 08:06:53 SkyScan query 08:06:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.245<-17283 Statuses=0008 0009 08:06:53 Msec=2250 True Az=112.995 Ze=-79.245 Az status=0008 Ze status=0009 08:06:53 Check angles 08:06:53 SkyScan query 08:06:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.29<-15886 Statuses=0008 0009 08:06:54 Msec=3000 True Az=112.995 Ze=-58.29 Az status=0008 Ze status=0009 08:06:54 Check angles 08:06:54 SkyScan query 08:06:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.38<-14492 Statuses=0008 0009 08:06:55 Msec=3750 True Az=112.995 Ze=-37.38 Az status=0008 Ze status=0009 08:06:55 Check angles 08:06:55 SkyScan query 08:06:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.99<-13066 Statuses=0008 0009 08:06:55 Msec=4500 True Az=112.995 Ze=-15.99 Az status=0008 Ze status=0009 08:06:56 Check angles 08:06:56 SkyScan query 08:06:56 SkyScan query done: ret=0 az=112.98<-7532 ze=5.07<-11662 Statuses=0008 0009 08:06:56 Msec=5250 True Az=112.98 Ze=5.07 Az status=0008 Ze status=0009 08:06:56 Check angles 08:06:56 SkyScan query 08:06:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:06:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:06:57 Message to Master queued w/err=0: serial=117326 error=0 08:07:02 Received message from Master: op=Filter serial=117327 08:07:02 Color wheel filter change from 0 to 0 08:07:02 FLIGetFilterPos err=0 currentPosition=0 08:07:02 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:02 Filter is already there-color wheel unchanged 08:07:02 Received message from Master: op=Shutter serial=117328 08:07:02 Shutter LASER close 08:07:02 Received message from Camera: op=State serial=117330 08:07:02 GetSingleValue result=40 Value=cccccccc 08:07:02 SkyScan query 08:07:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:07:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:03 Parameters OK 08:07:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:03 Set A/D data flow result=40 08:07:03 Set A/D channel type result=40 08:07:03 Set A/D encoding result=40 08:07:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:03 Set channel filter=0.000000e+000 result=40 08:07:03 Config A/D Result=40 08:07:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:03 Get A/D filter: -9.255963e+061 result=40 08:07:03 Get A/D value=-858993460 result=40 08:07:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:03 Parameters OK 08:07:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:03 Set A/D data flow result=40 08:07:03 Set A/D channel type result=40 08:07:03 Set A/D encoding result=40 08:07:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:03 Set channel filter=0.000000e+000 result=40 08:07:03 Config A/D Result=40 08:07:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:03 Get A/D filter: -9.255963e+061 result=40 08:07:03 Get A/D value=-858993460 result=40 08:07:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:03 Aux= 08:07:03 Message to Camera, serial 117330 queued 08:07:40 Received message from Master: op=PointingHead serial=117343 08:07:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:07:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:07:40 Point started: ret=0 08:07:40 point_skyscan result=0 08:07:41 Check angles 08:07:41 SkyScan query 08:07:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:07:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:07:41 Message to Master queued w/err=0: serial=117343 error=0 08:07:46 Received message from Master: op=Filter serial=117344 08:07:46 Color wheel filter change from 0 to 0 08:07:46 FLIGetFilterPos err=0 currentPosition=0 08:07:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:46 Filter is already there-color wheel unchanged 08:07:47 Received message from Master: op=Shutter serial=117345 08:07:47 Shutter LASER close 08:07:47 Received message from Camera: op=State serial=117347 08:07:47 GetSingleValue result=40 Value=cccccccc 08:07:47 SkyScan query 08:07:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:07:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:47 Parameters OK 08:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:47 Set A/D data flow result=40 08:07:47 Set A/D channel type result=40 08:07:47 Set A/D encoding result=40 08:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:47 Set channel filter=0.000000e+000 result=40 08:07:47 Config A/D Result=40 08:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:47 Get A/D filter: -9.255963e+061 result=40 08:07:47 Get A/D value=-858993460 result=40 08:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:47 Parameters OK 08:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:47 Set A/D data flow result=40 08:07:47 Set A/D channel type result=40 08:07:47 Set A/D encoding result=40 08:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:47 Set channel filter=0.000000e+000 result=40 08:07:47 Config A/D Result=40 08:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:47 Get A/D filter: -9.255963e+061 result=40 08:07:47 Get A/D value=-858993460 result=40 08:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:47 Aux= 08:07:47 Message to Camera, serial 117347 queued 08:08:24 Received message from Master: op=PointingHead serial=117360 08:08:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:08:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:08:24 Point started: ret=0 08:08:24 point_skyscan result=0 08:08:25 Check angles 08:08:25 SkyScan query 08:08:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:08:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:08:26 Message to Master queued w/err=0: serial=117360 error=0 08:08:31 Received message from Master: op=Filter serial=117361 08:08:31 Color wheel filter change from 0 to 0 08:08:31 FLIGetFilterPos err=0 currentPosition=0 08:08:31 FLIGetStepsRemaining err=0 RemainingSteps=0 08:08:31 Filter is already there-color wheel unchanged 08:08:31 Received message from Master: op=Shutter serial=117362 08:08:31 Shutter LASER close 08:08:31 Received message from Camera: op=State serial=117364 08:08:31 GetSingleValue result=40 Value=cccccccc 08:08:31 SkyScan query 08:08:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:08:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:31 Parameters OK 08:08:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:31 Set A/D data flow result=40 08:08:31 Set A/D channel type result=40 08:08:31 Set A/D encoding result=40 08:08:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:31 Set channel filter=0.000000e+000 result=40 08:08:31 Config A/D Result=40 08:08:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:31 Get A/D filter: -9.255963e+061 result=40 08:08:31 Get A/D value=-858993460 result=40 08:08:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:31 Parameters OK 08:08:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:31 Set A/D data flow result=40 08:08:31 Set A/D channel type result=40 08:08:31 Set A/D encoding result=40 08:08:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:31 Set channel filter=0.000000e+000 result=40 08:08:31 Config A/D Result=40 08:08:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:31 Get A/D filter: -9.255963e+061 result=40 08:08:31 Get A/D value=-858993460 result=40 08:08:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:08:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:08:31 Aux= 08:08:31 Message to Camera, serial 117364 queued 08:09:08 Received message from Master: op=PointingHead serial=117377 08:09:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:09:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:09:09 Point started: ret=0 08:09:09 point_skyscan result=0 08:09:09 Check angles 08:09:09 SkyScan query 08:09:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:09:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:09:10 Message to Master queued w/err=0: serial=117377 error=0 08:09:15 Received message from Master: op=Filter serial=117378 08:09:15 Color wheel filter change from 0 to 0 08:09:15 FLIGetFilterPos err=0 currentPosition=0 08:09:15 FLIGetStepsRemaining err=0 RemainingSteps=0 08:09:15 Filter is already there-color wheel unchanged 08:09:15 Received message from Master: op=Shutter serial=117379 08:09:15 Shutter LASER close 08:09:15 Received message from Camera: op=State serial=117381 08:09:15 GetSingleValue result=40 Value=cccccccc 08:09:15 SkyScan query 08:09:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:09:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:16 Parameters OK 08:09:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:16 Set A/D data flow result=40 08:09:16 Set A/D channel type result=40 08:09:16 Set A/D encoding result=40 08:09:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:16 Set channel filter=0.000000e+000 result=40 08:09:16 Config A/D Result=40 08:09:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:16 Get A/D filter: -9.255963e+061 result=40 08:09:16 Get A/D value=-858993460 result=40 08:09:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:16 Parameters OK 08:09:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:16 Set A/D data flow result=40 08:09:16 Set A/D channel type result=40 08:09:16 Set A/D encoding result=40 08:09:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:16 Set channel filter=0.000000e+000 result=40 08:09:16 Config A/D Result=40 08:09:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:16 Get A/D filter: -9.255963e+061 result=40 08:09:16 Get A/D value=-858993460 result=40 08:09:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:09:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:09:16 Aux= 08:09:16 Message to Camera, serial 117381 queued 08:09:52 Received message from Master: op=PointingHead serial=117393 08:09:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:09:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:09:52 Point started: ret=0 08:09:52 point_skyscan result=0 08:09:53 Check angles 08:09:53 SkyScan query 08:09:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 08:09:53 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 08:09:53 Check angles 08:09:53 SkyScan query 08:09:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.46<-14964 Statuses=0008 0009 08:09:54 Msec=750 True Az=112.995 Ze=-44.46 Az status=0008 Ze status=0009 08:09:54 Check angles 08:09:54 SkyScan query 08:09:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 08:09:55 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 08:09:55 Check angles 08:09:55 SkyScan query 08:09:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 08:09:56 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 08:09:56 Check angles 08:09:56 SkyScan query 08:09:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.295<-19153 Statuses=0008 0009 08:09:56 Msec=3000 True Az=112.995 Ze=-107.295 Az status=0008 Ze status=0009 08:09:56 Check angles 08:09:56 SkyScan query 08:09:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.235<-20549 Statuses=0008 0009 08:09:57 Msec=3750 True Az=112.995 Ze=-128.235 Az status=0008 Ze status=0009 08:09:57 Check angles 08:09:57 SkyScan query 08:09:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.205<-21947 Statuses=0008 0009 08:09:58 Msec=4500 True Az=112.995 Ze=-149.205 Az status=0008 Ze status=0009 08:09:58 Check angles 08:09:58 SkyScan query 08:09:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.145<-23343 Statuses=0008 0009 08:09:59 Msec=5250 True Az=112.995 Ze=-170.145 Az status=0008 Ze status=0009 08:09:59 Check angles 08:09:59 SkyScan query 08:09:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:09:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:09:59 Message to Master queued w/err=0: serial=117393 error=0 08:10:04 Received message from Master: op=Filter serial=117394 08:10:04 Color wheel filter change from 0 to 0 08:10:04 FLIGetFilterPos err=0 currentPosition=0 08:10:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:04 Filter is already there-color wheel unchanged 08:10:04 Received message from Master: op=Shutter serial=117395 08:10:04 Shutter LASER open 08:10:05 Received message from Camera: op=State serial=117397 08:10:05 GetSingleValue result=40 Value=cccccccc 08:10:05 SkyScan query 08:10:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:10:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:05 Parameters OK 08:10:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:05 Set A/D data flow result=40 08:10:05 Set A/D channel type result=40 08:10:05 Set A/D encoding result=40 08:10:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:05 Set channel filter=0.000000e+000 result=40 08:10:05 Config A/D Result=40 08:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:05 Get A/D filter: -9.255963e+061 result=40 08:10:05 Get A/D value=-858993460 result=40 08:10:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:05 Parameters OK 08:10:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:05 Set A/D data flow result=40 08:10:05 Set A/D channel type result=40 08:10:05 Set A/D encoding result=40 08:10:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:05 Set channel filter=0.000000e+000 result=40 08:10:05 Config A/D Result=40 08:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:05 Get A/D filter: -9.255963e+061 result=40 08:10:05 Get A/D value=-858993460 result=40 08:10:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:05 Aux= 08:10:05 Message to Camera, serial 117397 queued 08:10:14 Received message from Master: op=Shutter serial=117407 08:10:14 Shutter LASER close 08:10:14 Received message from Master: op=PointingHead serial=117411 08:10:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:10:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:10:15 Point started: ret=0 08:10:15 point_skyscan result=0 08:10:15 Check angles 08:10:15 SkyScan query 08:10:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 08:10:16 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 08:10:16 Check angles 08:10:16 SkyScan query 08:10:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 08:10:17 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 08:10:17 Check angles 08:10:17 SkyScan query 08:10:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.905<-18727 Statuses=0008 0009 08:10:17 Msec=1500 True Az=112.995 Ze=-100.905 Az status=0008 Ze status=0009 08:10:18 Check angles 08:10:18 SkyScan query 08:10:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.935<-17329 Statuses=0008 0009 08:10:18 Msec=2250 True Az=112.995 Ze=-79.935 Az status=0008 Ze status=0009 08:10:18 Check angles 08:10:18 SkyScan query 08:10:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.995<-15933 Statuses=0008 0009 08:10:19 Msec=3000 True Az=112.995 Ze=-58.995 Az status=0008 Ze status=0009 08:10:19 Check angles 08:10:19 SkyScan query 08:10:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.98<-14532 Statuses=0008 0009 08:10:20 Msec=3750 True Az=112.995 Ze=-37.98 Az status=0008 Ze status=0009 08:10:20 Check angles 08:10:20 SkyScan query 08:10:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.04<-13136 Statuses=0008 0009 08:10:20 Msec=4500 True Az=112.995 Ze=-17.04 Az status=0008 Ze status=0009 08:10:21 Check angles 08:10:21 SkyScan query 08:10:21 SkyScan query done: ret=0 az=112.995<-7533 ze=3.915<-11739 Statuses=0008 0009 08:10:21 Msec=5250 True Az=112.995 Ze=3.915 Az status=0008 Ze status=0009 08:10:21 Check angles 08:10:21 SkyScan query 08:10:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:10:22 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:10:22 Message to Master queued w/err=0: serial=117411 error=0 08:10:27 Received message from Master: op=Filter serial=117412 08:10:27 Color wheel filter change from 0 to 0 08:10:27 FLIGetFilterPos err=0 currentPosition=0 08:10:27 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:27 Filter is already there-color wheel unchanged 08:10:27 Received message from Master: op=Shutter serial=117413 08:10:27 Shutter LASER close 08:10:27 Received message from Camera: op=State serial=117415 08:10:27 GetSingleValue result=40 Value=cccccccc 08:10:27 SkyScan query 08:10:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:10:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:28 Parameters OK 08:10:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:28 Set A/D data flow result=40 08:10:28 Set A/D channel type result=40 08:10:28 Set A/D encoding result=40 08:10:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:28 Set channel filter=0.000000e+000 result=40 08:10:28 Config A/D Result=40 08:10:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:28 Get A/D filter: -9.255963e+061 result=40 08:10:28 Get A/D value=-858993460 result=40 08:10:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:28 Parameters OK 08:10:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:28 Set A/D data flow result=40 08:10:28 Set A/D channel type result=40 08:10:28 Set A/D encoding result=40 08:10:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:28 Set channel filter=0.000000e+000 result=40 08:10:28 Config A/D Result=40 08:10:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:28 Get A/D filter: -9.255963e+061 result=40 08:10:28 Get A/D value=-858993460 result=40 08:10:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:28 Aux= 08:10:28 Message to Camera, serial 117415 queued 08:11:05 Received message from Master: op=PointingHead serial=117428 08:11:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:11:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:11:05 Point started: ret=0 08:11:05 point_skyscan result=0 08:11:06 Check angles 08:11:06 SkyScan query 08:11:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:11:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:11:06 Message to Master queued w/err=0: serial=117428 error=0 08:11:11 Received message from Master: op=Filter serial=117429 08:11:11 Color wheel filter change from 0 to 0 08:11:11 FLIGetFilterPos err=0 currentPosition=0 08:11:11 FLIGetStepsRemaining err=0 RemainingSteps=0 08:11:11 Filter is already there-color wheel unchanged 08:11:12 Received message from Master: op=Shutter serial=117430 08:11:12 Shutter LASER close 08:11:12 Received message from Camera: op=State serial=117432 08:11:12 GetSingleValue result=40 Value=cccccccc 08:11:12 SkyScan query 08:11:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:11:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:12 Parameters OK 08:11:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:12 Set A/D data flow result=40 08:11:12 Set A/D channel type result=40 08:11:12 Set A/D encoding result=40 08:11:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:12 Set channel filter=0.000000e+000 result=40 08:11:12 Config A/D Result=40 08:11:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:12 Get A/D filter: -9.255963e+061 result=40 08:11:12 Get A/D value=-858993460 result=40 08:11:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:12 Parameters OK 08:11:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:12 Set A/D data flow result=40 08:11:12 Set A/D channel type result=40 08:11:12 Set A/D encoding result=40 08:11:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:12 Set channel filter=0.000000e+000 result=40 08:11:12 Config A/D Result=40 08:11:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:12 Get A/D filter: -9.255963e+061 result=40 08:11:12 Get A/D value=-858993460 result=40 08:11:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:11:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:11:12 Aux= 08:11:12 Message to Camera, serial 117432 queued 08:11:49 Received message from Master: op=PointingHead serial=117445 08:11:49 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:11:49 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:11:49 Point started: ret=0 08:11:49 point_skyscan result=0 08:11:50 Check angles 08:11:50 SkyScan query 08:11:51 SkyScan query done: ret=0 az=135.765<-9051 ze=-6.51<-12434 Statuses=0009 0008 08:11:51 Msec=0 True Az=135.765 Ze=-6.51 Az status=0009 Ze status=0008 08:11:51 Check angles 08:11:51 SkyScan query 08:11:51 SkyScan query done: ret=0 az=153.285<-10219 ze=-6.495<-12433 Statuses=0009 0008 08:11:51 Msec=750 True Az=153.285 Ze=-6.495 Az status=0009 Ze status=0008 08:11:52 Check angles 08:11:52 SkyScan query 08:11:52 SkyScan query done: ret=0 az=170.775<-11385 ze=-6.495<-12433 Statuses=0009 0008 08:11:52 Msec=1500 True Az=170.775 Ze=-6.495 Az status=0009 Ze status=0008 08:11:52 Check angles 08:11:52 SkyScan query 08:11:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:11:53 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:11:53 Message to Master queued w/err=0: serial=117445 error=0 08:11:58 Received message from Master: op=Filter serial=117446 08:11:58 Color wheel filter change from 0 to 0 08:11:58 FLIGetFilterPos err=0 currentPosition=0 08:11:58 FLIGetStepsRemaining err=0 RemainingSteps=0 08:11:58 Filter is already there-color wheel unchanged 08:11:58 Received message from Master: op=Shutter serial=117447 08:11:58 Shutter LASER close 08:11:58 Received message from Camera: op=State serial=117449 08:11:58 GetSingleValue result=40 Value=cccccccc 08:11:58 SkyScan query 08:11:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:11:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:59 Parameters OK 08:11:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:59 Set A/D data flow result=40 08:11:59 Set A/D channel type result=40 08:11:59 Set A/D encoding result=40 08:11:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:59 Set channel filter=0.000000e+000 result=40 08:11:59 Config A/D Result=40 08:11:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:59 Get A/D filter: -9.255963e+061 result=40 08:11:59 Get A/D value=-858993460 result=40 08:11:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:59 Parameters OK 08:11:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:59 Set A/D data flow result=40 08:11:59 Set A/D channel type result=40 08:11:59 Set A/D encoding result=40 08:11:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:59 Set channel filter=0.000000e+000 result=40 08:11:59 Config A/D Result=40 08:11:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:59 Get A/D filter: -9.255963e+061 result=40 08:11:59 Get A/D value=-858993460 result=40 08:11:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:11:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:11:59 Aux= 08:11:59 Message to Camera, serial 117449 queued 08:12:36 Received message from Master: op=PointingHead serial=117462 08:12:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:12:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:12:36 Point started: ret=0 08:12:36 point_skyscan result=0 08:12:37 Check angles 08:12:37 SkyScan query 08:12:37 SkyScan query done: ret=0 az=152.85<-10190 ze=6.51<-11566 Statuses=0009 0008 08:12:37 Msec=0 True Az=152.85 Ze=6.51 Az status=0009 Ze status=0008 08:12:37 Check angles 08:12:37 SkyScan query 08:12:38 SkyScan query done: ret=0 az=135.48<-9032 ze=6.495<-11567 Statuses=0009 0008 08:12:38 Msec=750 True Az=135.48 Ze=6.495 Az status=0009 Ze status=0008 08:12:38 Check angles 08:12:38 SkyScan query 08:12:39 SkyScan query done: ret=0 az=117.63<-7842 ze=6.495<-11567 Statuses=0009 0008 08:12:39 Msec=1500 True Az=117.63 Ze=6.495 Az status=0009 Ze status=0008 08:12:39 Check angles 08:12:39 SkyScan query 08:12:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:12:39 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:12:39 Message to Master queued w/err=0: serial=117462 error=0 08:12:44 Received message from Master: op=Filter serial=117463 08:12:44 Color wheel filter change from 0 to 0 08:12:44 FLIGetFilterPos err=0 currentPosition=0 08:12:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:44 Filter is already there-color wheel unchanged 08:12:45 Received message from Master: op=Shutter serial=117464 08:12:45 Shutter LASER close 08:12:45 Received message from Camera: op=State serial=117466 08:12:45 GetSingleValue result=40 Value=cccccccc 08:12:45 SkyScan query 08:12:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:12:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:45 Parameters OK 08:12:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:45 Set A/D data flow result=40 08:12:45 Set A/D channel type result=40 08:12:45 Set A/D encoding result=40 08:12:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:45 Set channel filter=0.000000e+000 result=40 08:12:45 Config A/D Result=40 08:12:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:45 Get A/D filter: -9.255963e+061 result=40 08:12:45 Get A/D value=-858993460 result=40 08:12:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:45 Parameters OK 08:12:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:45 Set A/D data flow result=40 08:12:45 Set A/D channel type result=40 08:12:45 Set A/D encoding result=40 08:12:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:45 Set channel filter=0.000000e+000 result=40 08:12:45 Config A/D Result=40 08:12:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:45 Get A/D filter: -9.255963e+061 result=40 08:12:45 Get A/D value=-858993460 result=40 08:12:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:45 Aux= 08:12:45 Message to Camera, serial 117466 queued 08:13:22 Received message from Master: op=PointingHead serial=117479 08:13:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:13:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:13:22 Point started: ret=0 08:13:22 point_skyscan result=0 08:13:23 Check angles 08:13:23 SkyScan query 08:13:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 08:13:24 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 08:13:24 Check angles 08:13:24 SkyScan query 08:13:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 08:13:25 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 08:13:25 Check angles 08:13:25 SkyScan query 08:13:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.265<-16351 Statuses=0008 0009 08:13:25 Msec=1500 True Az=112.995 Ze=-65.265 Az status=0008 Ze status=0009 08:13:25 Check angles 08:13:25 SkyScan query 08:13:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.205<-17747 Statuses=0008 0009 08:13:26 Msec=2250 True Az=112.995 Ze=-86.205 Az status=0008 Ze status=0009 08:13:26 Check angles 08:13:26 SkyScan query 08:13:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.595<-19173 Statuses=0008 0009 08:13:27 Msec=3000 True Az=112.995 Ze=-107.595 Az status=0008 Ze status=0009 08:13:27 Check angles 08:13:27 SkyScan query 08:13:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.535<-20569 Statuses=0008 0009 08:13:28 Msec=3750 True Az=112.995 Ze=-128.535 Az status=0008 Ze status=0009 08:13:28 Check angles 08:13:28 SkyScan query 08:13:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.52<-21968 Statuses=0008 0009 08:13:28 Msec=4500 True Az=112.995 Ze=-149.52 Az status=0008 Ze status=0009 08:13:28 Check angles 08:13:28 SkyScan query 08:13:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.85<-23390 Statuses=0008 0009 08:13:29 Msec=5250 True Az=112.995 Ze=-170.85 Az status=0008 Ze status=0009 08:13:29 Check angles 08:13:29 SkyScan query 08:13:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:13:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:13:30 Message to Master queued w/err=0: serial=117479 error=0 08:13:35 Received message from Master: op=Filter serial=117480 08:13:35 Color wheel filter change from 0 to 0 08:13:35 FLIGetFilterPos err=0 currentPosition=0 08:13:35 FLIGetStepsRemaining err=0 RemainingSteps=0 08:13:35 Filter is already there-color wheel unchanged 08:13:35 Received message from Master: op=Shutter serial=117481 08:13:35 Shutter LASER open 08:13:35 Received message from Camera: op=State serial=117483 08:13:35 GetSingleValue result=40 Value=cccccccc 08:13:35 SkyScan query 08:13:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:13:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:36 Parameters OK 08:13:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:36 Set A/D data flow result=40 08:13:36 Set A/D channel type result=40 08:13:36 Set A/D encoding result=40 08:13:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:36 Set channel filter=0.000000e+000 result=40 08:13:36 Config A/D Result=40 08:13:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:36 Get A/D filter: -9.255963e+061 result=40 08:13:36 Get A/D value=-858993460 result=40 08:13:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:36 Parameters OK 08:13:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:36 Set A/D data flow result=40 08:13:36 Set A/D channel type result=40 08:13:36 Set A/D encoding result=40 08:13:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:36 Set channel filter=0.000000e+000 result=40 08:13:36 Config A/D Result=40 08:13:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:36 Get A/D filter: -9.255963e+061 result=40 08:13:36 Get A/D value=-858993460 result=40 08:13:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:13:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:13:36 Aux= 08:13:36 Message to Camera, serial 117483 queued 08:13:44 Received message from Master: op=Shutter serial=117493 08:13:44 Shutter LASER close 08:13:45 Received message from Master: op=PointingHead serial=117497 08:13:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:13:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:13:45 Point started: ret=0 08:13:45 point_skyscan result=0 08:13:46 Check angles 08:13:46 SkyScan query 08:13:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 08:13:46 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 08:13:47 Check angles 08:13:47 SkyScan query 08:13:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 08:13:47 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 08:13:47 Check angles 08:13:47 SkyScan query 08:13:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.95<-18730 Statuses=0008 0009 08:13:48 Msec=1500 True Az=112.995 Ze=-100.95 Az status=0008 Ze status=0009 08:13:48 Check angles 08:13:48 SkyScan query 08:13:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 08:13:49 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 08:13:49 Check angles 08:13:49 SkyScan query 08:13:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.04<-15936 Statuses=0008 0009 08:13:49 Msec=3000 True Az=112.995 Ze=-59.04 Az status=0008 Ze status=0009 08:13:50 Check angles 08:13:50 SkyScan query 08:13:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.025<-14535 Statuses=0008 0009 08:13:50 Msec=3750 True Az=112.995 Ze=-38.025 Az status=0008 Ze status=0009 08:13:50 Check angles 08:13:50 SkyScan query 08:13:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.635<-13109 Statuses=0008 0009 08:13:51 Msec=4500 True Az=112.995 Ze=-16.635 Az status=0008 Ze status=0009 08:13:51 Check angles 08:13:51 SkyScan query 08:13:52 SkyScan query done: ret=0 az=112.995<-7533 ze=4.575<-11695 Statuses=0008 0009 08:13:52 Msec=5250 True Az=112.995 Ze=4.575 Az status=0008 Ze status=0009 08:13:52 Check angles 08:13:52 SkyScan query 08:13:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:13:52 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:13:52 Message to Master queued w/err=0: serial=117497 error=0 08:13:57 Received message from Master: op=Filter serial=117498 08:13:57 Color wheel filter change from 0 to 0 08:13:57 FLIGetFilterPos err=0 currentPosition=0 08:13:57 FLIGetStepsRemaining err=0 RemainingSteps=0 08:13:57 Filter is already there-color wheel unchanged 08:13:58 Received message from Master: op=Shutter serial=117499 08:13:58 Shutter LASER close 08:13:58 Received message from Camera: op=State serial=117501 08:13:58 GetSingleValue result=40 Value=cccccccc 08:13:58 SkyScan query 08:13:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:13:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:58 Parameters OK 08:13:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:58 Set A/D data flow result=40 08:13:58 Set A/D channel type result=40 08:13:58 Set A/D encoding result=40 08:13:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:58 Set channel filter=0.000000e+000 result=40 08:13:58 Config A/D Result=40 08:13:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:58 Get A/D filter: -9.255963e+061 result=40 08:13:58 Get A/D value=-858993460 result=40 08:13:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:58 Parameters OK 08:13:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:58 Set A/D data flow result=40 08:13:58 Set A/D channel type result=40 [UTC 2019-3-5 08:13:58] 08:13:58 Set A/D encoding result=40 08:13:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:58 Set channel filter=0.000000e+000 result=40 08:13:58 Config A/D Result=40 08:13:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:58 Get A/D filter: -9.255963e+061 result=40 08:13:58 Get A/D value=-858993460 result=40 08:13:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:13:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:13:58 Aux= 08:13:58 Message to Camera, serial 117501 queued 08:14:35 Received message from Master: op=PointingHead serial=117514 08:14:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:14:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:14:35 Point started: ret=0 08:14:35 point_skyscan result=0 08:14:36 Check angles 08:14:36 SkyScan query 08:14:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:14:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:14:37 Message to Master queued w/err=0: serial=117514 error=0 08:14:42 Received message from Master: op=Filter serial=117515 08:14:42 Color wheel filter change from 0 to 0 08:14:42 FLIGetFilterPos err=0 currentPosition=0 08:14:42 FLIGetStepsRemaining err=0 RemainingSteps=0 08:14:42 Filter is already there-color wheel unchanged 08:14:42 Received message from Master: op=Shutter serial=117516 08:14:42 Shutter LASER close 08:14:42 Received message from Camera: op=State serial=117518 08:14:42 GetSingleValue result=40 Value=cccccccc 08:14:42 SkyScan query 08:14:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:14:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:43 Parameters OK 08:14:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:43 Set A/D data flow result=40 08:14:43 Set A/D channel type result=40 08:14:43 Set A/D encoding result=40 08:14:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:43 Set channel filter=0.000000e+000 result=40 08:14:43 Config A/D Result=40 08:14:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:43 Get A/D filter: -9.255963e+061 result=40 08:14:43 Get A/D value=-858993460 result=40 08:14:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:43 Parameters OK 08:14:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:43 Set A/D data flow result=40 08:14:43 Set A/D channel type result=40 08:14:43 Set A/D encoding result=40 08:14:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:43 Set channel filter=0.000000e+000 result=40 08:14:43 Config A/D Result=40 08:14:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:43 Get A/D filter: -9.255963e+061 result=40 08:14:43 Get A/D value=-858993460 result=40 08:14:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:14:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:14:43 Aux= 08:14:43 Message to Camera, serial 117518 queued 08:15:19 Received message from Master: op=PointingHead serial=117531 08:15:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:15:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:15:20 Point started: ret=0 08:15:20 point_skyscan result=0 08:15:21 Check angles 08:15:21 SkyScan query 08:15:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:15:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:15:21 Message to Master queued w/err=0: serial=117531 error=0 08:15:26 Received message from Master: op=Filter serial=117532 08:15:26 Color wheel filter change from 0 to 0 08:15:26 FLIGetFilterPos err=0 currentPosition=0 08:15:26 FLIGetStepsRemaining err=0 RemainingSteps=0 08:15:26 Filter is already there-color wheel unchanged 08:15:26 Received message from Master: op=Shutter serial=117533 08:15:26 Shutter LASER close 08:15:26 Received message from Camera: op=State serial=117535 08:15:26 GetSingleValue result=40 Value=cccccccc 08:15:26 SkyScan query 08:15:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:15:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:27 Parameters OK 08:15:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:27 Set A/D data flow result=40 08:15:27 Set A/D channel type result=40 08:15:27 Set A/D encoding result=40 08:15:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:27 Set channel filter=0.000000e+000 result=40 08:15:27 Config A/D Result=40 08:15:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:27 Get A/D filter: -9.255963e+061 result=40 08:15:27 Get A/D value=-858993460 result=40 08:15:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:27 Parameters OK 08:15:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:27 Set A/D data flow result=40 08:15:27 Set A/D channel type result=40 08:15:27 Set A/D encoding result=40 08:15:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:27 Set channel filter=0.000000e+000 result=40 08:15:27 Config A/D Result=40 08:15:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:27 Get A/D filter: -9.255963e+061 result=40 08:15:27 Get A/D value=-858993460 result=40 08:15:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:15:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:15:27 Aux= 08:15:27 Message to Camera, serial 117535 queued 08:16:04 Received message from Master: op=PointingHead serial=117548 08:16:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:16:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:16:04 Point started: ret=0 08:16:04 point_skyscan result=0 08:16:05 Check angles 08:16:05 SkyScan query 08:16:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:16:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:16:05 Message to Master queued w/err=0: serial=117548 error=0 08:16:10 Received message from Master: op=Filter serial=117549 08:16:10 Color wheel filter change from 0 to 0 08:16:10 FLIGetFilterPos err=0 currentPosition=0 08:16:10 FLIGetStepsRemaining err=0 RemainingSteps=0 08:16:10 Filter is already there-color wheel unchanged 08:16:11 Received message from Master: op=Shutter serial=117550 08:16:11 Shutter LASER close 08:16:11 Received message from Camera: op=State serial=117552 08:16:11 GetSingleValue result=40 Value=cccccccc 08:16:11 SkyScan query 08:16:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:16:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:11 Parameters OK 08:16:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:11 Set A/D data flow result=40 08:16:11 Set A/D channel type result=40 08:16:11 Set A/D encoding result=40 08:16:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:11 Set channel filter=0.000000e+000 result=40 08:16:11 Config A/D Result=40 08:16:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:11 Get A/D filter: -9.255963e+061 result=40 08:16:11 Get A/D value=-858993460 result=40 08:16:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:11 Parameters OK 08:16:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:11 Set A/D data flow result=40 08:16:11 Set A/D channel type result=40 08:16:11 Set A/D encoding result=40 08:16:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:11 Set channel filter=0.000000e+000 result=40 08:16:11 Config A/D Result=40 08:16:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:11 Get A/D filter: -9.255963e+061 result=40 08:16:11 Get A/D value=-858993460 result=40 08:16:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:16:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:16:11 Aux= 08:16:11 Message to Camera, serial 117552 queued 08:16:48 Received message from Master: op=PointingHead serial=117565 08:16:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:16:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:16:48 Point started: ret=0 08:16:48 point_skyscan result=0 08:16:49 Check angles 08:16:49 SkyScan query 08:16:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 08:16:50 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 08:16:50 Check angles 08:16:50 SkyScan query 08:16:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 08:16:50 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 08:16:51 Check angles 08:16:51 SkyScan query 08:16:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.995<-16333 Statuses=0008 0009 08:16:51 Msec=1500 True Az=112.995 Ze=-64.995 Az status=0008 Ze status=0009 08:16:51 Check angles 08:16:51 SkyScan query 08:16:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.95<-17730 Statuses=0008 0009 08:16:52 Msec=2250 True Az=112.995 Ze=-85.95 Az status=0008 Ze status=0009 08:16:52 Check angles 08:16:52 SkyScan query 08:16:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.875<-19125 Statuses=0008 0009 08:16:53 Msec=3000 True Az=112.995 Ze=-106.875 Az status=0008 Ze status=0009 08:16:53 Check angles 08:16:53 SkyScan query 08:16:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.815<-20521 Statuses=0008 0009 08:16:53 Msec=3750 True Az=112.995 Ze=-127.815 Az status=0008 Ze status=0009 08:16:54 Check angles 08:16:54 SkyScan query 08:16:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.755<-21917 Statuses=0008 0009 08:16:54 Msec=4500 True Az=112.995 Ze=-148.755 Az status=0008 Ze status=0009 08:16:54 Check angles 08:16:54 SkyScan query 08:16:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.695<-23313 Statuses=0008 0009 08:16:55 Msec=5250 True Az=112.995 Ze=-169.695 Az status=0008 Ze status=0009 08:16:55 Check angles 08:16:55 SkyScan query 08:16:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:16:56 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:16:56 Message to Master queued w/err=0: serial=117565 error=0 08:17:01 Received message from Master: op=Filter serial=117566 08:17:01 Color wheel filter change from 0 to 0 08:17:01 FLIGetFilterPos err=0 currentPosition=0 08:17:01 FLIGetStepsRemaining err=0 RemainingSteps=0 08:17:01 Filter is already there-color wheel unchanged 08:17:01 Received message from Master: op=Shutter serial=117567 08:17:01 Shutter LASER open 08:17:01 Received message from Camera: op=State serial=117569 08:17:01 GetSingleValue result=40 Value=cccccccc 08:17:01 SkyScan query 08:17:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:17:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:02 Parameters OK 08:17:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:02 Set A/D data flow result=40 08:17:02 Set A/D channel type result=40 08:17:02 Set A/D encoding result=40 08:17:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:02 Set channel filter=0.000000e+000 result=40 08:17:02 Config A/D Result=40 08:17:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:02 Get A/D filter: -9.255963e+061 result=40 08:17:02 Get A/D value=-858993460 result=40 08:17:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:02 Parameters OK 08:17:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:02 Set A/D data flow result=40 08:17:02 Set A/D channel type result=40 08:17:02 Set A/D encoding result=40 08:17:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:02 Set channel filter=0.000000e+000 result=40 08:17:02 Config A/D Result=40 08:17:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:02 Get A/D filter: -9.255963e+061 result=40 08:17:02 Get A/D value=-858993460 result=40 08:17:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:02 Aux= 08:17:02 Message to Camera, serial 117569 queued 08:17:10 Received message from Master: op=Shutter serial=117579 08:17:10 Shutter LASER close 08:17:11 Received message from Master: op=PointingHead serial=117583 08:17:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:17:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:17:11 Point started: ret=0 08:17:11 point_skyscan result=0 08:17:12 Check angles 08:17:12 SkyScan query 08:17:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 08:17:12 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 08:17:12 Check angles 08:17:12 SkyScan query 08:17:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.295<-20153 Statuses=0008 0009 08:17:13 Msec=750 True Az=112.995 Ze=-122.295 Az status=0008 Ze status=0009 08:17:13 Check angles 08:17:13 SkyScan query 08:17:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.34<-18756 Statuses=0008 0009 08:17:14 Msec=1500 True Az=112.995 Ze=-101.34 Az status=0008 Ze status=0009 08:17:14 Check angles 08:17:14 SkyScan query 08:17:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.37<-17358 Statuses=0008 0009 08:17:15 Msec=2250 True Az=112.995 Ze=-80.37 Az status=0008 Ze status=0009 08:17:15 Check angles 08:17:15 SkyScan query 08:17:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.43<-15962 Statuses=0008 0009 08:17:15 Msec=3000 True Az=112.995 Ze=-59.43 Az status=0008 Ze status=0009 08:17:15 Check angles 08:17:15 SkyScan query 08:17:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.43<-14562 Statuses=0008 0009 08:17:16 Msec=3750 True Az=112.995 Ze=-38.43 Az status=0008 Ze status=0009 08:17:16 Check angles 08:17:16 SkyScan query 08:17:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.49<-13166 Statuses=0008 0009 08:17:17 Msec=4500 True Az=112.995 Ze=-17.49 Az status=0008 Ze status=0009 08:17:17 Check angles 08:17:17 SkyScan query 08:17:18 SkyScan query done: ret=0 az=112.98<-7532 ze=3.465<-11769 Statuses=0008 0009 08:17:18 Msec=5250 True Az=112.98 Ze=3.465 Az status=0008 Ze status=0009 08:17:18 Check angles 08:17:18 SkyScan query 08:17:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:17:18 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:17:18 Message to Master queued w/err=0: serial=117583 error=0 08:17:23 Received message from Master: op=Filter serial=117584 08:17:23 Color wheel filter change from 0 to 0 08:17:23 FLIGetFilterPos err=0 currentPosition=0 08:17:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:17:23 Filter is already there-color wheel unchanged 08:17:23 Received message from Master: op=Shutter serial=117585 08:17:23 Shutter LASER close 08:17:24 Received message from Camera: op=State serial=117587 08:17:24 GetSingleValue result=40 Value=cccccccc 08:17:24 SkyScan query 08:17:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:17:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:24 Parameters OK 08:17:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:24 Set A/D data flow result=40 08:17:24 Set A/D channel type result=40 08:17:24 Set A/D encoding result=40 08:17:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:24 Set channel filter=0.000000e+000 result=40 08:17:24 Config A/D Result=40 08:17:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:24 Get A/D filter: -9.255963e+061 result=40 08:17:24 Get A/D value=-858993460 result=40 08:17:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:24 Parameters OK 08:17:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:24 Set A/D data flow result=40 08:17:24 Set A/D channel type result=40 08:17:24 Set A/D encoding result=40 08:17:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:24 Set channel filter=0.000000e+000 result=40 08:17:24 Config A/D Result=40 08:17:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:24 Get A/D filter: -9.255963e+061 result=40 08:17:24 Get A/D value=-858993460 result=40 08:17:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:24 Aux= 08:17:24 Message to Camera, serial 117587 queued 08:18:01 Received message from Master: op=PointingHead serial=117600 08:18:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:18:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:18:01 Point started: ret=0 08:18:01 point_skyscan result=0 08:18:02 Check angles 08:18:02 SkyScan query 08:18:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:18:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:18:03 Message to Master queued w/err=0: serial=117600 error=0 08:18:08 Received message from Master: op=Filter serial=117601 08:18:08 Color wheel filter change from 0 to 0 08:18:08 FLIGetFilterPos err=0 currentPosition=0 08:18:08 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:08 Filter is already there-color wheel unchanged 08:18:08 Received message from Master: op=Shutter serial=117602 08:18:08 Shutter LASER close 08:18:08 Received message from Camera: op=State serial=117604 08:18:08 GetSingleValue result=40 Value=cccccccc 08:18:08 SkyScan query 08:18:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:18:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:09 Parameters OK 08:18:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:09 Set A/D data flow result=40 08:18:09 Set A/D channel type result=40 08:18:09 Set A/D encoding result=40 08:18:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:09 Set channel filter=0.000000e+000 result=40 08:18:09 Config A/D Result=40 08:18:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:09 Get A/D filter: -9.255963e+061 result=40 08:18:09 Get A/D value=-858993460 result=40 08:18:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:09 Parameters OK 08:18:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:09 Set A/D data flow result=40 08:18:09 Set A/D channel type result=40 08:18:09 Set A/D encoding result=40 08:18:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:09 Set channel filter=0.000000e+000 result=40 08:18:09 Config A/D Result=40 08:18:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:09 Get A/D filter: -9.255963e+061 result=40 08:18:09 Get A/D value=-858993460 result=40 08:18:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:09 Aux= 08:18:09 Message to Camera, serial 117604 queued 08:18:45 Received message from Master: op=PointingHead serial=117617 08:18:45 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:18:45 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:18:46 Point started: ret=0 08:18:46 point_skyscan result=0 08:18:47 Check angles 08:18:47 SkyScan query 08:18:47 SkyScan query done: ret=0 az=135.99<-9066 ze=-6.51<-12434 Statuses=0009 0008 08:18:47 Msec=0 True Az=135.99 Ze=-6.51 Az status=0009 Ze status=0008 08:18:47 Check angles 08:18:47 SkyScan query 08:18:48 SkyScan query done: ret=0 az=153.915<-10261 ze=-6.495<-12433 Statuses=0009 0008 08:18:48 Msec=750 True Az=153.915 Ze=-6.495 Az status=0009 Ze status=0008 08:18:48 Check angles 08:18:48 SkyScan query 08:18:49 SkyScan query done: ret=0 az=171.645<-11443 ze=-6.495<-12433 Statuses=0009 0008 08:18:49 Msec=1500 True Az=171.645 Ze=-6.495 Az status=0009 Ze status=0008 08:18:49 Check angles 08:18:49 SkyScan query 08:18:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:18:49 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:18:49 Message to Master queued w/err=0: serial=117617 error=0 08:18:54 Received message from Master: op=Filter serial=117618 08:18:54 Color wheel filter change from 0 to 0 08:18:54 FLIGetFilterPos err=0 currentPosition=0 08:18:54 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:54 Filter is already there-color wheel unchanged 08:18:55 Received message from Master: op=Shutter serial=117619 08:18:55 Shutter LASER close 08:18:55 Received message from Camera: op=State serial=117621 08:18:55 GetSingleValue result=40 Value=cccccccc 08:18:55 SkyScan query 08:18:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:18:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:55 Parameters OK 08:18:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:55 Set A/D data flow result=40 08:18:55 Set A/D channel type result=40 08:18:55 Set A/D encoding result=40 08:18:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:55 Set channel filter=0.000000e+000 result=40 08:18:55 Config A/D Result=40 08:18:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:55 Get A/D filter: -9.255963e+061 result=40 08:18:55 Get A/D value=-858993460 result=40 08:18:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:55 Parameters OK 08:18:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:55 Set A/D data flow result=40 08:18:55 Set A/D channel type result=40 08:18:55 Set A/D encoding result=40 08:18:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:55 Set channel filter=0.000000e+000 result=40 08:18:55 Config A/D Result=40 08:18:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:55 Get A/D filter: -9.255963e+061 result=40 08:18:55 Get A/D value=-858993460 result=40 08:18:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:55 Aux= 08:18:55 Message to Camera, serial 117621 queued 08:19:32 Received message from Master: op=PointingHead serial=117634 08:19:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:19:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:19:32 Point started: ret=0 08:19:32 point_skyscan result=0 08:19:33 Check angles 08:19:33 SkyScan query 08:19:34 SkyScan query done: ret=0 az=152.685<-10179 ze=6.51<-11566 Statuses=0009 0008 08:19:34 Msec=0 True Az=152.685 Ze=6.51 Az status=0009 Ze status=0008 08:19:34 Check angles 08:19:34 SkyScan query 08:19:34 SkyScan query done: ret=0 az=135.075<-9005 ze=6.495<-11567 Statuses=0009 0008 08:19:34 Msec=750 True Az=135.075 Ze=6.495 Az status=0009 Ze status=0008 08:19:35 Check angles 08:19:35 SkyScan query 08:19:35 SkyScan query done: ret=0 az=117.63<-7842 ze=6.495<-11567 Statuses=0009 0008 08:19:35 Msec=1500 True Az=117.63 Ze=6.495 Az status=0009 Ze status=0008 08:19:35 Check angles 08:19:35 SkyScan query 08:19:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:19:36 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:19:36 Message to Master queued w/err=0: serial=117634 error=0 08:19:41 Received message from Master: op=Filter serial=117635 08:19:41 Color wheel filter change from 0 to 0 08:19:41 FLIGetFilterPos err=0 currentPosition=0 08:19:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:19:41 Filter is already there-color wheel unchanged 08:19:41 Received message from Master: op=Shutter serial=117636 08:19:41 Shutter LASER close 08:19:41 Received message from Camera: op=State serial=117638 08:19:41 GetSingleValue result=40 Value=cccccccc 08:19:41 SkyScan query 08:19:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:19:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:42 Parameters OK 08:19:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:42 Set A/D data flow result=40 08:19:42 Set A/D channel type result=40 08:19:42 Set A/D encoding result=40 08:19:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:42 Set channel filter=0.000000e+000 result=40 08:19:42 Config A/D Result=40 08:19:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:42 Get A/D filter: -9.255963e+061 result=40 08:19:42 Get A/D value=-858993460 result=40 08:19:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:42 Parameters OK 08:19:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:42 Set A/D data flow result=40 08:19:42 Set A/D channel type result=40 08:19:42 Set A/D encoding result=40 08:19:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:42 Set channel filter=0.000000e+000 result=40 08:19:42 Config A/D Result=40 08:19:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:42 Get A/D filter: -9.255963e+061 result=40 08:19:42 Get A/D value=-858993460 result=40 08:19:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:19:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:19:42 Aux= 08:19:42 Message to Camera, serial 117638 queued 08:20:19 Received message from Master: op=PointingHead serial=117651 08:20:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:20:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:20:19 Point started: ret=0 08:20:19 point_skyscan result=0 08:20:20 Check angles 08:20:20 SkyScan query 08:20:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 08:20:20 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 08:20:21 Check angles 08:20:21 SkyScan query 08:20:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.7<-14980 Statuses=0008 0009 08:20:21 Msec=750 True Az=112.995 Ze=-44.7 Az status=0008 Ze status=0009 08:20:21 Check angles 08:20:21 SkyScan query 08:20:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.105<-16407 Statuses=0008 0009 08:20:22 Msec=1500 True Az=112.995 Ze=-66.105 Az status=0008 Ze status=0009 08:20:22 Check angles 08:20:22 SkyScan query 08:20:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.075<-17805 Statuses=0008 0009 08:20:23 Msec=2250 True Az=112.995 Ze=-87.075 Az status=0008 Ze status=0009 08:20:23 Check angles 08:20:23 SkyScan query 08:20:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.495<-19233 Statuses=0008 0009 08:20:23 Msec=3000 True Az=112.995 Ze=-108.495 Az status=0008 Ze status=0009 08:20:24 Check angles 08:20:24 SkyScan query 08:20:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.855<-20657 Statuses=0008 0009 08:20:24 Msec=3750 True Az=112.995 Ze=-129.855 Az status=0008 Ze status=0009 08:20:24 Check angles 08:20:24 SkyScan query 08:20:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.185<-22079 Statuses=0008 0009 08:20:25 Msec=4500 True Az=112.995 Ze=-151.185 Az status=0008 Ze status=0009 08:20:25 Check angles 08:20:25 SkyScan query 08:20:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.735<-23449 Statuses=0008 0009 08:20:26 Msec=5250 True Az=112.995 Ze=-171.735 Az status=0008 Ze status=0009 08:20:26 Check angles 08:20:26 SkyScan query 08:20:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:20:26 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:20:26 Message to Master queued w/err=0: serial=117651 error=0 08:20:31 Received message from Master: op=Filter serial=117652 08:20:31 Color wheel filter change from 0 to 0 08:20:31 FLIGetFilterPos err=0 currentPosition=0 08:20:31 FLIGetStepsRemaining err=0 RemainingSteps=0 08:20:31 Filter is already there-color wheel unchanged 08:20:32 Received message from Master: op=Shutter serial=117653 08:20:32 Shutter LASER open 08:20:32 Received message from Camera: op=State serial=117655 08:20:32 GetSingleValue result=40 Value=cccccccc 08:20:32 SkyScan query 08:20:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:20:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:32 Parameters OK 08:20:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:32 Set A/D data flow result=40 08:20:32 Set A/D channel type result=40 08:20:32 Set A/D encoding result=40 08:20:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:32 Set channel filter=0.000000e+000 result=40 08:20:32 Config A/D Result=40 08:20:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:32 Get A/D filter: -9.255963e+061 result=40 08:20:32 Get A/D value=-858993460 result=40 08:20:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:32 Parameters OK 08:20:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:32 Set A/D data flow result=40 08:20:32 Set A/D channel type result=40 08:20:32 Set A/D encoding result=40 08:20:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:32 Set channel filter=0.000000e+000 result=40 08:20:32 Config A/D Result=40 08:20:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:32 Get A/D filter: -9.255963e+061 result=40 08:20:32 Get A/D value=-858993460 result=40 08:20:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:20:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:20:32 Aux= 08:20:32 Message to Camera, serial 117655 queued 08:20:41 Received message from Master: op=Shutter serial=117665 08:20:41 Shutter LASER close 08:20:41 Received message from Master: op=PointingHead serial=117669 08:20:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:20:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:20:42 Point started: ret=0 08:20:42 point_skyscan result=0 08:20:42 Check angles 08:20:42 SkyScan query 08:20:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 08:20:43 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 08:20:43 Check angles 08:20:43 SkyScan query 08:20:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.49<-20166 Statuses=0008 0009 08:20:44 Msec=750 True Az=112.995 Ze=-122.49 Az status=0008 Ze status=0009 08:20:44 Check angles 08:20:44 SkyScan query 08:20:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 08:20:44 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 08:20:45 Check angles 08:20:45 SkyScan query 08:20:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.1<-17340 Statuses=0008 0009 08:20:45 Msec=2250 True Az=112.995 Ze=-80.1 Az status=0008 Ze status=0009 08:20:45 Check angles 08:20:45 SkyScan query 08:20:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.16<-15944 Statuses=0008 0009 08:20:46 Msec=3000 True Az=112.995 Ze=-59.16 Az status=0008 Ze status=0009 08:20:46 Check angles 08:20:46 SkyScan query 08:20:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.695<-14513 Statuses=0008 0009 08:20:47 Msec=3750 True Az=112.995 Ze=-37.695 Az status=0008 Ze status=0009 08:20:47 Check angles 08:20:47 SkyScan query 08:20:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.35<-13090 Statuses=0008 0009 08:20:47 Msec=4500 True Az=112.995 Ze=-16.35 Az status=0008 Ze status=0009 08:20:48 Check angles 08:20:48 SkyScan query 08:20:48 SkyScan query done: ret=0 az=112.995<-7533 ze=4.485<-11701 Statuses=0008 0009 08:20:48 Msec=5250 True Az=112.995 Ze=4.485 Az status=0008 Ze status=0009 08:20:48 Check angles 08:20:48 SkyScan query 08:20:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:20:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:20:49 Message to Master queued w/err=0: serial=117669 error=0 08:20:54 Received message from Master: op=Filter serial=117670 08:20:54 Color wheel filter change from 0 to 0 08:20:54 FLIGetFilterPos err=0 currentPosition=0 08:20:54 FLIGetStepsRemaining err=0 RemainingSteps=0 08:20:54 Filter is already there-color wheel unchanged 08:20:54 Received message from Master: op=Shutter serial=117671 08:20:54 Shutter LASER close 08:20:54 Received message from Camera: op=State serial=117673 08:20:54 GetSingleValue result=40 Value=cccccccc 08:20:54 SkyScan query 08:20:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:20:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:55 Parameters OK 08:20:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:55 Set A/D data flow result=40 08:20:55 Set A/D channel type result=40 08:20:55 Set A/D encoding result=40 08:20:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:55 Set channel filter=0.000000e+000 result=40 08:20:55 Config A/D Result=40 08:20:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:55 Get A/D filter: -9.255963e+061 result=40 08:20:55 Get A/D value=-858993460 result=40 08:20:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:55 Parameters OK 08:20:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:55 Set A/D data flow result=40 08:20:55 Set A/D channel type result=40 08:20:55 Set A/D encoding result=40 08:20:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:55 Set channel filter=0.000000e+000 result=40 08:20:55 Config A/D Result=40 08:20:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:55 Get A/D filter: -9.255963e+061 result=40 08:20:55 Get A/D value=-858993460 result=40 08:20:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:20:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:20:55 Aux= 08:20:55 Message to Camera, serial 117673 queued 08:21:32 Received message from Master: op=PointingHead serial=117686 08:21:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:21:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:21:32 Point started: ret=0 08:21:32 point_skyscan result=0 08:21:33 Check angles 08:21:33 SkyScan query 08:21:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:21:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:21:33 Message to Master queued w/err=0: serial=117686 error=0 08:21:38 Received message from Master: op=Filter serial=117687 08:21:38 Color wheel filter change from 0 to 0 08:21:38 FLIGetFilterPos err=0 currentPosition=0 08:21:38 FLIGetStepsRemaining err=0 RemainingSteps=0 08:21:38 Filter is already there-color wheel unchanged 08:21:38 Received message from Master: op=Shutter serial=117688 08:21:38 Shutter LASER close 08:21:39 Received message from Camera: op=State serial=117690 08:21:39 GetSingleValue result=40 Value=cccccccc 08:21:39 SkyScan query 08:21:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:21:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:39 Parameters OK 08:21:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:39 Set A/D data flow result=40 08:21:39 Set A/D channel type result=40 08:21:39 Set A/D encoding result=40 08:21:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:39 Set channel filter=0.000000e+000 result=40 08:21:39 Config A/D Result=40 08:21:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:39 Get A/D filter: -9.255963e+061 result=40 08:21:39 Get A/D value=-858993460 result=40 08:21:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:39 Parameters OK 08:21:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:39 Set A/D data flow result=40 08:21:39 Set A/D channel type result=40 08:21:39 Set A/D encoding result=40 08:21:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:39 Set channel filter=0.000000e+000 result=40 08:21:39 Config A/D Result=40 08:21:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:39 Get A/D filter: -9.255963e+061 result=40 08:21:39 Get A/D value=-858993460 result=40 08:21:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:21:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:21:39 Aux= 08:21:39 Message to Camera, serial 117690 queued 08:22:16 Received message from Master: op=PointingHead serial=117703 08:22:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:22:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:22:16 Point started: ret=0 08:22:16 point_skyscan result=0 08:22:17 Check angles 08:22:17 SkyScan query 08:22:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:22:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:22:18 Message to Master queued w/err=0: serial=117703 error=0 08:22:23 Received message from Master: op=Filter serial=117704 08:22:23 Color wheel filter change from 0 to 0 08:22:23 FLIGetFilterPos err=0 currentPosition=0 08:22:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:22:23 Filter is already there-color wheel unchanged 08:22:23 Received message from Master: op=Shutter serial=117705 08:22:23 Shutter LASER close 08:22:23 Received message from Camera: op=State serial=117707 08:22:23 GetSingleValue result=40 Value=cccccccc 08:22:23 SkyScan query 08:22:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:22:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:23 Parameters OK 08:22:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:23 Set A/D data flow result=40 08:22:23 Set A/D channel type result=40 08:22:23 Set A/D encoding result=40 08:22:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:23 Set channel filter=0.000000e+000 result=40 08:22:23 Config A/D Result=40 08:22:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:23 Get A/D filter: -9.255963e+061 result=40 08:22:23 Get A/D value=-858993460 result=40 08:22:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:23 Parameters OK 08:22:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:23 Set A/D data flow result=40 08:22:23 Set A/D channel type result=40 08:22:23 Set A/D encoding result=40 08:22:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:23 Set channel filter=0.000000e+000 result=40 08:22:23 Config A/D Result=40 08:22:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:23 Get A/D filter: -9.255963e+061 result=40 08:22:23 Get A/D value=-858993460 result=40 08:22:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:22:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:22:23 Aux= 08:22:23 Message to Camera, serial 117707 queued 08:22:59 Received message from Master: op=PointingHead serial=117719 08:22:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:22:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:23:00 Point started: ret=0 08:23:00 point_skyscan result=0 08:23:00 Check angles 08:23:00 SkyScan query 08:23:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:23:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:23:01 Message to Master queued w/err=0: serial=117719 error=0 08:23:06 Received message from Master: op=Filter serial=117720 08:23:06 Color wheel filter change from 0 to 0 08:23:06 FLIGetFilterPos err=0 currentPosition=0 08:23:06 FLIGetStepsRemaining err=0 RemainingSteps=0 08:23:06 Filter is already there-color wheel unchanged 08:23:06 Received message from Master: op=Shutter serial=117721 08:23:06 Shutter LASER close 08:23:06 Received message from Camera: op=State serial=117723 08:23:06 GetSingleValue result=40 Value=cccccccc 08:23:06 SkyScan query 08:23:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:23:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:07 Parameters OK 08:23:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:07 Set A/D data flow result=40 08:23:07 Set A/D channel type result=40 08:23:07 Set A/D encoding result=40 08:23:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:07 Set channel filter=0.000000e+000 result=40 08:23:07 Config A/D Result=40 08:23:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:07 Get A/D filter: -9.255963e+061 result=40 08:23:07 Get A/D value=-858993460 result=40 08:23:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:07 Parameters OK 08:23:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:07 Set A/D data flow result=40 08:23:07 Set A/D channel type result=40 08:23:07 Set A/D encoding result=40 08:23:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:07 Set channel filter=0.000000e+000 result=40 08:23:07 Config A/D Result=40 08:23:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:07 Get A/D filter: -9.255963e+061 result=40 08:23:07 Get A/D value=-858993460 result=40 08:23:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:23:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:23:07 Aux= 08:23:07 Message to Camera, serial 117723 queued 08:23:44 Received message from Master: op=PointingHead serial=117736 08:23:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:23:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:23:44 Point started: ret=0 08:23:44 point_skyscan result=0 08:23:45 Check angles 08:23:45 SkyScan query 08:23:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.52<-13568 Statuses=0008 0009 08:23:45 Msec=0 True Az=112.995 Ze=-23.52 Az status=0008 Ze status=0009 08:23:46 Check angles 08:23:46 SkyScan query 08:23:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.895<-14993 Statuses=0008 0009 08:23:46 Msec=750 True Az=112.995 Ze=-44.895 Az status=0008 Ze status=0009 08:23:46 Check angles 08:23:46 SkyScan query 08:23:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.85<-16390 Statuses=0008 0009 08:23:47 Msec=1500 True Az=112.995 Ze=-65.85 Az status=0008 Ze status=0009 08:23:47 Check angles 08:23:47 SkyScan query 08:23:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.805<-17787 Statuses=0008 0009 08:23:48 Msec=2250 True Az=112.995 Ze=-86.805 Az status=0008 Ze status=0009 08:23:48 Check angles 08:23:48 SkyScan query 08:23:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.76<-19184 Statuses=0008 0009 08:23:48 Msec=3000 True Az=112.995 Ze=-107.76 Az status=0008 Ze status=0009 08:23:49 Check angles 08:23:49 SkyScan query 08:23:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.745<-20583 Statuses=0008 0009 08:23:49 Msec=3750 True Az=112.995 Ze=-128.745 Az status=0008 Ze status=0009 08:23:49 Check angles 08:23:49 SkyScan query 08:23:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.18<-22012 Statuses=0008 0009 08:23:50 Msec=4500 True Az=112.995 Ze=-150.18 Az status=0008 Ze status=0009 [UTC 2019-3-5 08:23:50] 08:23:50 Check angles 08:23:50 SkyScan query 08:23:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.985<-23399 Statuses=0008 0009 08:23:51 Msec=5250 True Az=112.995 Ze=-170.985 Az status=0008 Ze status=0009 08:23:51 Check angles 08:23:51 SkyScan query 08:23:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:23:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:23:51 Message to Master queued w/err=0: serial=117736 error=0 08:23:56 Received message from Master: op=Filter serial=117737 08:23:56 Color wheel filter change from 0 to 0 08:23:56 FLIGetFilterPos err=0 currentPosition=0 08:23:56 FLIGetStepsRemaining err=0 RemainingSteps=0 08:23:56 Filter is already there-color wheel unchanged 08:23:57 Received message from Master: op=Shutter serial=117738 08:23:57 Shutter LASER open 08:23:57 Received message from Camera: op=State serial=117740 08:23:57 GetSingleValue result=40 Value=cccccccc 08:23:57 SkyScan query 08:23:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:23:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:57 Parameters OK 08:23:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:57 Set A/D data flow result=40 08:23:57 Set A/D channel type result=40 08:23:57 Set A/D encoding result=40 08:23:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:57 Set channel filter=0.000000e+000 result=40 08:23:57 Config A/D Result=40 08:23:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:57 Get A/D filter: -9.255963e+061 result=40 08:23:57 Get A/D value=-858993460 result=40 08:23:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:57 Parameters OK 08:23:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:57 Set A/D data flow result=40 08:23:57 Set A/D channel type result=40 08:23:57 Set A/D encoding result=40 08:23:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:57 Set channel filter=0.000000e+000 result=40 08:23:57 Config A/D Result=40 08:23:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:57 Get A/D filter: -9.255963e+061 result=40 08:23:57 Get A/D value=-858993460 result=40 08:23:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:23:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:23:57 Aux= 08:23:57 Message to Camera, serial 117740 queued 08:24:06 Received message from Master: op=Shutter serial=117750 08:24:06 Shutter LASER close 08:24:06 Received message from Master: op=PointingHead serial=117754 08:24:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:24:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:24:07 Point started: ret=0 08:24:07 point_skyscan result=0 08:24:07 Check angles 08:24:07 SkyScan query 08:24:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 08:24:08 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 08:24:08 Check angles 08:24:08 SkyScan query 08:24:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.965<-20131 Statuses=0008 0009 08:24:09 Msec=750 True Az=112.995 Ze=-121.965 Az status=0008 Ze status=0009 08:24:09 Check angles 08:24:09 SkyScan query 08:24:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.055<-18737 Statuses=0008 0009 08:24:10 Msec=1500 True Az=112.995 Ze=-101.055 Az status=0008 Ze status=0009 08:24:10 Check angles 08:24:10 SkyScan query 08:24:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 08:24:10 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 08:24:10 Check angles 08:24:10 SkyScan query 08:24:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.13<-15942 Statuses=0008 0009 08:24:11 Msec=3000 True Az=112.995 Ze=-59.13 Az status=0008 Ze status=0009 08:24:11 Check angles 08:24:11 SkyScan query 08:24:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.68<-14512 Statuses=0008 0009 08:24:12 Msec=3750 True Az=112.995 Ze=-37.68 Az status=0008 Ze status=0009 08:24:12 Check angles 08:24:12 SkyScan query 08:24:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.725<-13115 Statuses=0008 0009 08:24:13 Msec=4500 True Az=112.995 Ze=-16.725 Az status=0008 Ze status=0009 08:24:13 Check angles 08:24:13 SkyScan query 08:24:13 SkyScan query done: ret=0 az=112.995<-7533 ze=4.2<-11720 Statuses=0008 0009 08:24:13 Msec=5250 True Az=112.995 Ze=4.2 Az status=0008 Ze status=0009 08:24:13 Check angles 08:24:13 SkyScan query 08:24:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:24:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:24:14 Message to Master queued w/err=0: serial=117754 error=0 08:24:19 Received message from Master: op=Filter serial=117755 08:24:19 Color wheel filter change from 0 to 0 08:24:19 FLIGetFilterPos err=0 currentPosition=0 08:24:19 FLIGetStepsRemaining err=0 RemainingSteps=0 08:24:19 Filter is already there-color wheel unchanged 08:24:19 Received message from Master: op=Shutter serial=117756 08:24:19 Shutter LASER close 08:24:19 Received message from Camera: op=State serial=117758 08:24:19 GetSingleValue result=40 Value=cccccccc 08:24:19 SkyScan query 08:24:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:24:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:20 Parameters OK 08:24:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:20 Set A/D data flow result=40 08:24:20 Set A/D channel type result=40 08:24:20 Set A/D encoding result=40 08:24:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:20 Set channel filter=0.000000e+000 result=40 08:24:20 Config A/D Result=40 08:24:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:20 Get A/D filter: -9.255963e+061 result=40 08:24:20 Get A/D value=-858993460 result=40 08:24:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:20 Parameters OK 08:24:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:20 Set A/D data flow result=40 08:24:20 Set A/D channel type result=40 08:24:20 Set A/D encoding result=40 08:24:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:20 Set channel filter=0.000000e+000 result=40 08:24:20 Config A/D Result=40 08:24:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:20 Get A/D filter: -9.255963e+061 result=40 08:24:20 Get A/D value=-858993460 result=40 08:24:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:24:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:24:20 Aux= 08:24:20 Message to Camera, serial 117758 queued 08:24:57 Received message from Master: op=PointingHead serial=117771 08:24:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:24:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:24:57 Point started: ret=0 08:24:57 point_skyscan result=0 08:24:58 Check angles 08:24:58 SkyScan query 08:24:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:24:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:24:58 Message to Master queued w/err=0: serial=117771 error=0 08:25:03 Received message from Master: op=Filter serial=117772 08:25:03 Color wheel filter change from 0 to 0 08:25:03 FLIGetFilterPos err=0 currentPosition=0 08:25:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:03 Filter is already there-color wheel unchanged 08:25:04 Received message from Master: op=Shutter serial=117773 08:25:04 Shutter LASER close 08:25:04 Received message from Camera: op=State serial=117775 08:25:04 GetSingleValue result=40 Value=cccccccc 08:25:04 SkyScan query 08:25:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:25:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:04 Parameters OK 08:25:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:04 Set A/D data flow result=40 08:25:04 Set A/D channel type result=40 08:25:04 Set A/D encoding result=40 08:25:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:04 Set channel filter=0.000000e+000 result=40 08:25:04 Config A/D Result=40 08:25:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:04 Get A/D filter: -9.255963e+061 result=40 08:25:04 Get A/D value=-858993460 result=40 08:25:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:04 Parameters OK 08:25:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:04 Set A/D data flow result=40 08:25:04 Set A/D channel type result=40 08:25:04 Set A/D encoding result=40 08:25:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:04 Set channel filter=0.000000e+000 result=40 08:25:04 Config A/D Result=40 08:25:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:04 Get A/D filter: -9.255963e+061 result=40 08:25:04 Get A/D value=-858993460 result=40 08:25:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:04 Aux= 08:25:04 Message to Camera, serial 117775 queued 08:25:41 Received message from Master: op=PointingHead serial=117788 08:25:41 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:25:41 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:25:41 Point started: ret=0 08:25:41 point_skyscan result=0 08:25:42 Check angles 08:25:42 SkyScan query 08:25:43 SkyScan query done: ret=0 az=136.185<-9079 ze=-6.51<-12434 Statuses=0009 0008 08:25:43 Msec=0 True Az=136.185 Ze=-6.51 Az status=0009 Ze status=0008 08:25:43 Check angles 08:25:43 SkyScan query 08:25:44 SkyScan query done: ret=0 az=153.72<-10248 ze=-6.495<-12433 Statuses=0009 0008 08:25:44 Msec=750 True Az=153.72 Ze=-6.495 Az status=0009 Ze status=0008 08:25:44 Check angles 08:25:44 SkyScan query 08:25:44 SkyScan query done: ret=0 az=171.54<-11436 ze=-6.495<-12433 Statuses=0009 0008 08:25:44 Msec=1500 True Az=171.54 Ze=-6.495 Az status=0009 Ze status=0008 08:25:44 Check angles 08:25:44 SkyScan query 08:25:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:25:45 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:25:45 Message to Master queued w/err=0: serial=117788 error=0 08:25:50 Received message from Master: op=Filter serial=117789 08:25:50 Color wheel filter change from 0 to 0 08:25:50 FLIGetFilterPos err=0 currentPosition=0 08:25:50 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:50 Filter is already there-color wheel unchanged 08:25:50 Received message from Master: op=Shutter serial=117790 08:25:50 Shutter LASER close 08:25:50 Received message from Camera: op=State serial=117792 08:25:50 GetSingleValue result=40 Value=cccccccc 08:25:50 SkyScan query 08:25:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:25:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:51 Parameters OK 08:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:51 Set A/D data flow result=40 08:25:51 Set A/D channel type result=40 08:25:51 Set A/D encoding result=40 08:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:51 Set channel filter=0.000000e+000 result=40 08:25:51 Config A/D Result=40 08:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:51 Get A/D filter: -9.255963e+061 result=40 08:25:51 Get A/D value=-858993460 result=40 08:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:51 Parameters OK 08:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:51 Set A/D data flow result=40 08:25:51 Set A/D channel type result=40 08:25:51 Set A/D encoding result=40 08:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:51 Set channel filter=0.000000e+000 result=40 08:25:51 Config A/D Result=40 08:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:51 Get A/D filter: -9.255963e+061 result=40 08:25:51 Get A/D value=-858993460 result=40 08:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:51 Aux= 08:25:51 Message to Camera, serial 117792 queued 08:26:28 Received message from Master: op=PointingHead serial=117805 08:26:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:26:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:26:28 Point started: ret=0 08:26:28 point_skyscan result=0 08:26:29 Check angles 08:26:29 SkyScan query 08:26:29 SkyScan query done: ret=0 az=152.715<-10181 ze=6.51<-11566 Statuses=0009 0008 08:26:29 Msec=0 True Az=152.715 Ze=6.51 Az status=0009 Ze status=0008 08:26:30 Check angles 08:26:30 SkyScan query 08:26:30 SkyScan query done: ret=0 az=135.075<-9005 ze=6.495<-11567 Statuses=0009 0008 08:26:30 Msec=750 True Az=135.075 Ze=6.495 Az status=0009 Ze status=0008 08:26:30 Check angles 08:26:30 SkyScan query 08:26:31 SkyScan query done: ret=0 az=117.63<-7842 ze=6.495<-11567 Statuses=0009 0008 08:26:31 Msec=1500 True Az=117.63 Ze=6.495 Az status=0009 Ze status=0008 08:26:31 Check angles 08:26:31 SkyScan query 08:26:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:26:32 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:26:32 Message to Master queued w/err=0: serial=117805 error=0 08:26:37 Received message from Master: op=Filter serial=117806 08:26:37 Color wheel filter change from 0 to 0 08:26:37 FLIGetFilterPos err=0 currentPosition=0 08:26:37 FLIGetStepsRemaining err=0 RemainingSteps=0 08:26:37 Filter is already there-color wheel unchanged 08:26:37 Received message from Master: op=Shutter serial=117807 08:26:37 Shutter LASER close 08:26:37 Received message from Camera: op=State serial=117809 08:26:37 GetSingleValue result=40 Value=cccccccc 08:26:37 SkyScan query 08:26:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:26:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:37 Parameters OK 08:26:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:37 Set A/D data flow result=40 08:26:37 Set A/D channel type result=40 08:26:37 Set A/D encoding result=40 08:26:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:37 Set channel filter=0.000000e+000 result=40 08:26:37 Config A/D Result=40 08:26:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:37 Get A/D filter: -9.255963e+061 result=40 08:26:37 Get A/D value=-858993460 result=40 08:26:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:37 Parameters OK 08:26:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:37 Set A/D data flow result=40 08:26:37 Set A/D channel type result=40 08:26:37 Set A/D encoding result=40 08:26:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:37 Set channel filter=0.000000e+000 result=40 08:26:37 Config A/D Result=40 08:26:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:37 Get A/D filter: -9.255963e+061 result=40 08:26:37 Get A/D value=-858993460 result=40 08:26:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:26:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:26:37 Aux= 08:26:37 Message to Camera, serial 117809 queued 08:27:14 Received message from Master: op=PointingHead serial=117822 08:27:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:27:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:27:15 Point started: ret=0 08:27:15 point_skyscan result=0 08:27:15 Check angles 08:27:15 SkyScan query 08:27:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.43<-13562 Statuses=0008 0009 08:27:16 Msec=0 True Az=112.995 Ze=-23.43 Az status=0008 Ze status=0009 08:27:16 Check angles 08:27:16 SkyScan query 08:27:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 08:27:17 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 08:27:17 Check angles 08:27:17 SkyScan query 08:27:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 08:27:17 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 08:27:18 Check angles 08:27:18 SkyScan query 08:27:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.28<-17752 Statuses=0008 0009 08:27:18 Msec=2250 True Az=112.995 Ze=-86.28 Az status=0008 Ze status=0009 08:27:18 Check angles 08:27:18 SkyScan query 08:27:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.235<-19149 Statuses=0008 0009 08:27:19 Msec=3000 True Az=112.995 Ze=-107.235 Az status=0008 Ze status=0009 08:27:19 Check angles 08:27:19 SkyScan query 08:27:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.175<-20545 Statuses=0008 0009 08:27:20 Msec=3750 True Az=112.995 Ze=-128.175 Az status=0008 Ze status=0009 08:27:20 Check angles 08:27:20 SkyScan query 08:27:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.16<-21944 Statuses=0008 0009 08:27:20 Msec=4500 True Az=112.995 Ze=-149.16 Az status=0008 Ze status=0009 08:27:21 Check angles 08:27:21 SkyScan query 08:27:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.1<-23340 Statuses=0008 0009 08:27:21 Msec=5250 True Az=112.995 Ze=-170.1 Az status=0008 Ze status=0009 08:27:21 Check angles 08:27:21 SkyScan query 08:27:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:27:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:27:22 Message to Master queued w/err=0: serial=117822 error=0 08:27:27 Received message from Master: op=Filter serial=117823 08:27:27 Color wheel filter change from 0 to 0 08:27:27 FLIGetFilterPos err=0 currentPosition=0 08:27:27 FLIGetStepsRemaining err=0 RemainingSteps=0 08:27:27 Filter is already there-color wheel unchanged 08:27:27 Received message from Master: op=Shutter serial=117824 08:27:27 Shutter LASER open 08:27:27 Received message from Camera: op=State serial=117826 08:27:27 GetSingleValue result=40 Value=cccccccc 08:27:27 SkyScan query 08:27:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:27:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:28 Parameters OK 08:27:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:28 Set A/D data flow result=40 08:27:28 Set A/D channel type result=40 08:27:28 Set A/D encoding result=40 08:27:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:28 Set channel filter=0.000000e+000 result=40 08:27:28 Config A/D Result=40 08:27:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:28 Get A/D filter: -9.255963e+061 result=40 08:27:28 Get A/D value=-858993460 result=40 08:27:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:28 Parameters OK 08:27:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:28 Set A/D data flow result=40 08:27:28 Set A/D channel type result=40 08:27:28 Set A/D encoding result=40 08:27:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:28 Set channel filter=0.000000e+000 result=40 08:27:28 Config A/D Result=40 08:27:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:28 Get A/D filter: -9.255963e+061 result=40 08:27:28 Get A/D value=-858993460 result=40 08:27:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:27:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:27:28 Aux= 08:27:28 Message to Camera, serial 117826 queued 08:27:36 Received message from Master: op=Shutter serial=117836 08:27:36 Shutter LASER close 08:27:37 Received message from Master: op=PointingHead serial=117840 08:27:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:27:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:27:37 Point started: ret=0 08:27:37 point_skyscan result=0 08:27:38 Check angles 08:27:38 SkyScan query 08:27:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.025<-21535 Statuses=0008 0009 08:27:38 Msec=0 True Az=112.995 Ze=-143.025 Az status=0008 Ze status=0009 08:27:39 Check angles 08:27:39 SkyScan query 08:27:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 08:27:39 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 08:27:39 Check angles 08:27:39 SkyScan query 08:27:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 08:27:40 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 08:27:40 Check angles 08:27:40 SkyScan query 08:27:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 08:27:41 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 08:27:41 Check angles 08:27:41 SkyScan query 08:27:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 08:27:41 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 08:27:42 Check angles 08:27:42 SkyScan query 08:27:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.19<-14546 Statuses=0008 0009 08:27:42 Msec=3750 True Az=112.995 Ze=-38.19 Az status=0008 Ze status=0009 08:27:42 Check angles 08:27:42 SkyScan query 08:27:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.25<-13150 Statuses=0008 0009 08:27:43 Msec=4500 True Az=112.995 Ze=-17.25 Az status=0008 Ze status=0009 08:27:43 Check angles 08:27:43 SkyScan query 08:27:44 SkyScan query done: ret=0 az=112.995<-7533 ze=3.705<-11753 Statuses=0008 0009 08:27:44 Msec=5250 True Az=112.995 Ze=3.705 Az status=0008 Ze status=0009 08:27:44 Check angles 08:27:44 SkyScan query 08:27:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:27:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:27:44 Message to Master queued w/err=0: serial=117840 error=0 08:27:49 Received message from Master: op=Filter serial=117841 08:27:49 Color wheel filter change from 0 to 0 08:27:49 FLIGetFilterPos err=0 currentPosition=0 08:27:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:27:49 Filter is already there-color wheel unchanged 08:27:50 Received message from Master: op=Shutter serial=117842 08:27:50 Shutter LASER close 08:27:50 Received message from Camera: op=State serial=117844 08:27:50 GetSingleValue result=40 Value=cccccccc 08:27:50 SkyScan query 08:27:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:27:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:50 Parameters OK 08:27:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:50 Set A/D data flow result=40 08:27:50 Set A/D channel type result=40 08:27:50 Set A/D encoding result=40 08:27:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:50 Set channel filter=0.000000e+000 result=40 08:27:50 Config A/D Result=40 08:27:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:50 Get A/D filter: -9.255963e+061 result=40 08:27:50 Get A/D value=-858993460 result=40 08:27:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:50 Parameters OK 08:27:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:50 Set A/D data flow result=40 08:27:50 Set A/D channel type result=40 08:27:50 Set A/D encoding result=40 08:27:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:50 Set channel filter=0.000000e+000 result=40 08:27:50 Config A/D Result=40 08:27:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:50 Get A/D filter: -9.255963e+061 result=40 08:27:50 Get A/D value=-858993460 result=40 08:27:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:27:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:27:50 Aux= 08:27:50 Message to Camera, serial 117844 queued 08:28:27 Received message from Master: op=PointingHead serial=117857 08:28:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:28:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:28:28 Point started: ret=0 08:28:28 point_skyscan result=0 08:28:28 Check angles 08:28:28 SkyScan query 08:28:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:28:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:28:29 Message to Master queued w/err=0: serial=117857 error=0 08:28:34 Received message from Master: op=Filter serial=117858 08:28:34 Color wheel filter change from 0 to 0 08:28:34 FLIGetFilterPos err=0 currentPosition=0 08:28:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:28:34 Filter is already there-color wheel unchanged 08:28:34 Received message from Master: op=Shutter serial=117859 08:28:34 Shutter LASER close 08:28:34 Received message from Camera: op=State serial=117861 08:28:34 GetSingleValue result=40 Value=cccccccc 08:28:34 SkyScan query 08:28:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:28:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:35 Parameters OK 08:28:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:35 Set A/D data flow result=40 08:28:35 Set A/D channel type result=40 08:28:35 Set A/D encoding result=40 08:28:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:35 Set channel filter=0.000000e+000 result=40 08:28:35 Config A/D Result=40 08:28:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:35 Get A/D filter: -9.255963e+061 result=40 08:28:35 Get A/D value=-858993460 result=40 08:28:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:35 Parameters OK 08:28:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:35 Set A/D data flow result=40 08:28:35 Set A/D channel type result=40 08:28:35 Set A/D encoding result=40 08:28:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:35 Set channel filter=0.000000e+000 result=40 08:28:35 Config A/D Result=40 08:28:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:35 Get A/D filter: -9.255963e+061 result=40 08:28:35 Get A/D value=-858993460 result=40 08:28:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:28:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:28:35 Aux= 08:28:35 Message to Camera, serial 117861 queued 08:29:12 Received message from Master: op=PointingHead serial=117874 08:29:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:29:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:29:12 Point started: ret=0 08:29:12 point_skyscan result=0 08:29:13 Check angles 08:29:13 SkyScan query 08:29:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:29:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:29:13 Message to Master queued w/err=0: serial=117874 error=0 08:29:18 Received message from Master: op=Filter serial=117875 08:29:18 Color wheel filter change from 0 to 0 08:29:18 FLIGetFilterPos err=0 currentPosition=0 08:29:18 FLIGetStepsRemaining err=0 RemainingSteps=0 08:29:18 Filter is already there-color wheel unchanged 08:29:18 Received message from Master: op=Shutter serial=117876 08:29:18 Shutter LASER close 08:29:18 Received message from Camera: op=State serial=117878 08:29:18 GetSingleValue result=40 Value=cccccccc 08:29:18 SkyScan query 08:29:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:29:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:19 Parameters OK 08:29:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:19 Set A/D data flow result=40 08:29:19 Set A/D channel type result=40 08:29:19 Set A/D encoding result=40 08:29:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:19 Set channel filter=0.000000e+000 result=40 08:29:19 Config A/D Result=40 08:29:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:19 Get A/D filter: -9.255963e+061 result=40 08:29:19 Get A/D value=-858993460 result=40 08:29:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:19 Parameters OK 08:29:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:19 Set A/D data flow result=40 08:29:19 Set A/D channel type result=40 08:29:19 Set A/D encoding result=40 08:29:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:19 Set channel filter=0.000000e+000 result=40 08:29:19 Config A/D Result=40 08:29:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:19 Get A/D filter: -9.255963e+061 result=40 08:29:19 Get A/D value=-858993460 result=40 08:29:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:29:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:29:19 Aux= 08:29:19 Message to Camera, serial 117878 queued 08:29:56 Received message from Master: op=PointingHead serial=117891 08:29:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:29:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:29:56 Point started: ret=0 08:29:56 point_skyscan result=0 08:29:57 Check angles 08:29:57 SkyScan query 08:29:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:29:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:29:58 Message to Master queued w/err=0: serial=117891 error=0 08:30:03 Received message from Master: op=Filter serial=117892 08:30:03 Color wheel filter change from 0 to 0 08:30:03 FLIGetFilterPos err=0 currentPosition=0 08:30:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:03 Filter is already there-color wheel unchanged 08:30:03 Received message from Master: op=Shutter serial=117893 08:30:03 Shutter LASER close 08:30:03 Received message from Camera: op=State serial=117895 08:30:03 GetSingleValue result=40 Value=cccccccc 08:30:03 SkyScan query 08:30:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:30:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:03 Parameters OK 08:30:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:03 Set A/D data flow result=40 08:30:03 Set A/D channel type result=40 08:30:03 Set A/D encoding result=40 08:30:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:03 Set channel filter=0.000000e+000 result=40 08:30:03 Config A/D Result=40 08:30:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:03 Get A/D filter: -9.255963e+061 result=40 08:30:03 Get A/D value=-858993460 result=40 08:30:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:03 Parameters OK 08:30:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:03 Set A/D data flow result=40 08:30:03 Set A/D channel type result=40 08:30:03 Set A/D encoding result=40 08:30:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:03 Set channel filter=0.000000e+000 result=40 08:30:03 Config A/D Result=40 08:30:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:03 Get A/D filter: -9.255963e+061 result=40 08:30:03 Get A/D value=-858993460 result=40 08:30:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:03 Aux= 08:30:03 Message to Camera, serial 117895 queued 08:30:40 Received message from Master: op=PointingHead serial=117908 08:30:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:30:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:30:40 Point started: ret=0 08:30:40 point_skyscan result=0 08:30:41 Check angles 08:30:41 SkyScan query 08:30:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.805<-13587 Statuses=0008 0009 08:30:42 Msec=0 True Az=112.995 Ze=-23.805 Az status=0008 Ze status=0009 08:30:42 Check angles 08:30:42 SkyScan query 08:30:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 08:30:43 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 08:30:43 Check angles 08:30:43 SkyScan query 08:30:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 08:30:43 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 08:30:43 Check angles 08:30:43 SkyScan query 08:30:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.655<-17777 Statuses=0008 0009 08:30:44 Msec=2250 True Az=112.995 Ze=-86.655 Az status=0008 Ze status=0009 08:30:44 Check angles 08:30:44 SkyScan query 08:30:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.61<-19174 Statuses=0008 0009 08:30:45 Msec=3000 True Az=112.995 Ze=-107.61 Az status=0008 Ze status=0009 08:30:45 Check angles 08:30:45 SkyScan query 08:30:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.565<-20571 Statuses=0008 0009 08:30:46 Msec=3750 True Az=112.995 Ze=-128.565 Az status=0008 Ze status=0009 08:30:46 Check angles 08:30:46 SkyScan query 08:30:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.55<-21970 Statuses=0008 0009 08:30:46 Msec=4500 True Az=112.995 Ze=-149.55 Az status=0008 Ze status=0009 08:30:46 Check angles 08:30:46 SkyScan query 08:30:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.475<-23365 Statuses=0008 0009 08:30:47 Msec=5250 True Az=112.995 Ze=-170.475 Az status=0008 Ze status=0009 08:30:47 Check angles 08:30:47 SkyScan query 08:30:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:30:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:30:48 Message to Master queued w/err=0: serial=117908 error=0 08:30:53 Received message from Master: op=Filter serial=117909 08:30:53 Color wheel filter change from 0 to 0 08:30:53 FLIGetFilterPos err=0 currentPosition=0 08:30:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:53 Filter is already there-color wheel unchanged 08:30:53 Received message from Master: op=Shutter serial=117910 08:30:53 Shutter LASER open 08:30:53 Received message from Camera: op=State serial=117912 08:30:53 GetSingleValue result=40 Value=cccccccc 08:30:53 SkyScan query 08:30:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:30:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:54 Parameters OK 08:30:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:54 Set A/D data flow result=40 08:30:54 Set A/D channel type result=40 08:30:54 Set A/D encoding result=40 08:30:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:54 Set channel filter=0.000000e+000 result=40 08:30:54 Config A/D Result=40 08:30:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:54 Get A/D filter: -9.255963e+061 result=40 08:30:54 Get A/D value=-858993460 result=40 08:30:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:54 Parameters OK 08:30:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:54 Set A/D data flow result=40 08:30:54 Set A/D channel type result=40 08:30:54 Set A/D encoding result=40 08:30:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:54 Set channel filter=0.000000e+000 result=40 08:30:54 Config A/D Result=40 08:30:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:54 Get A/D filter: -9.255963e+061 result=40 08:30:54 Get A/D value=-858993460 result=40 08:30:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:54 Aux= 08:30:54 Message to Camera, serial 117912 queued 08:31:02 Received message from Master: op=Shutter serial=117922 08:31:02 Shutter LASER close 08:31:03 Received message from Master: op=PointingHead serial=117926 08:31:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:31:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:31:03 Point started: ret=0 08:31:03 point_skyscan result=0 08:31:04 Check angles 08:31:04 SkyScan query 08:31:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 08:31:04 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 08:31:05 Check angles 08:31:05 SkyScan query 08:31:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.505<-20167 Statuses=0008 0009 08:31:05 Msec=750 True Az=112.995 Ze=-122.505 Az status=0008 Ze status=0009 08:31:05 Check angles 08:31:05 SkyScan query 08:31:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.535<-18769 Statuses=0008 0009 08:31:06 Msec=1500 True Az=112.995 Ze=-101.535 Az status=0008 Ze status=0009 08:31:06 Check angles 08:31:06 SkyScan query 08:31:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.565<-17371 Statuses=0008 0009 08:31:07 Msec=2250 True Az=112.995 Ze=-80.565 Az status=0008 Ze status=0009 08:31:07 Check angles 08:31:07 SkyScan query 08:31:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.175<-15945 Statuses=0008 0009 08:31:07 Msec=3000 True Az=112.995 Ze=-59.175 Az status=0008 Ze status=0009 08:31:08 Check angles 08:31:08 SkyScan query 08:31:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.16<-14544 Statuses=0008 0009 08:31:08 Msec=3750 True Az=112.995 Ze=-38.16 Az status=0008 Ze status=0009 08:31:08 Check angles 08:31:08 SkyScan query 08:31:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.235<-13149 Statuses=0008 0009 08:31:09 Msec=4500 True Az=112.995 Ze=-17.235 Az status=0008 Ze status=0009 08:31:09 Check angles 08:31:09 SkyScan query 08:31:10 SkyScan query done: ret=0 az=112.995<-7533 ze=4.17<-11722 Statuses=0008 0009 08:31:10 Msec=5250 True Az=112.995 Ze=4.17 Az status=0008 Ze status=0009 08:31:10 Check angles 08:31:10 SkyScan query 08:31:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:31:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:31:10 Message to Master queued w/err=0: serial=117926 error=0 08:31:15 Received message from Master: op=Filter serial=117927 08:31:15 Color wheel filter change from 0 to 0 08:31:15 FLIGetFilterPos err=0 currentPosition=0 08:31:15 FLIGetStepsRemaining err=0 RemainingSteps=0 08:31:15 Filter is already there-color wheel unchanged 08:31:16 Received message from Master: op=Shutter serial=117928 08:31:16 Shutter LASER close 08:31:16 Received message from Camera: op=State serial=117930 08:31:16 GetSingleValue result=40 Value=cccccccc 08:31:16 SkyScan query 08:31:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:31:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:16 Parameters OK 08:31:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:16 Set A/D data flow result=40 08:31:16 Set A/D channel type result=40 08:31:16 Set A/D encoding result=40 08:31:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:16 Set channel filter=0.000000e+000 result=40 08:31:16 Config A/D Result=40 08:31:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:16 Get A/D filter: -9.255963e+061 result=40 08:31:16 Get A/D value=-858993460 result=40 08:31:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:16 Parameters OK 08:31:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:16 Set A/D data flow result=40 08:31:16 Set A/D channel type result=40 08:31:16 Set A/D encoding result=40 08:31:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:16 Set channel filter=0.000000e+000 result=40 08:31:16 Config A/D Result=40 08:31:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:16 Get A/D filter: -9.255963e+061 result=40 08:31:16 Get A/D value=-858993460 result=40 08:31:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:31:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:31:16 Aux= 08:31:16 Message to Camera, serial 117930 queued 08:31:53 Received message from Master: op=PointingHead serial=117943 08:31:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:31:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:31:54 Point started: ret=0 08:31:54 point_skyscan result=0 08:31:54 Check angles 08:31:54 SkyScan query 08:31:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:31:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:31:55 Message to Master queued w/err=0: serial=117943 error=0 08:32:00 Received message from Master: op=Filter serial=117944 08:32:00 Color wheel filter change from 0 to 0 08:32:00 FLIGetFilterPos err=0 currentPosition=0 08:32:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:32:00 Filter is already there-color wheel unchanged 08:32:00 Received message from Master: op=Shutter serial=117945 08:32:00 Shutter LASER close 08:32:00 Received message from Camera: op=State serial=117947 08:32:00 GetSingleValue result=40 Value=cccccccc 08:32:00 SkyScan query 08:32:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:32:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:01 Parameters OK 08:32:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:01 Set A/D data flow result=40 08:32:01 Set A/D channel type result=40 08:32:01 Set A/D encoding result=40 08:32:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:01 Set channel filter=0.000000e+000 result=40 08:32:01 Config A/D Result=40 08:32:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:01 Get A/D filter: -9.255963e+061 result=40 08:32:01 Get A/D value=-858993460 result=40 08:32:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:01 Parameters OK 08:32:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:01 Set A/D data flow result=40 08:32:01 Set A/D channel type result=40 08:32:01 Set A/D encoding result=40 08:32:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:01 Set channel filter=0.000000e+000 result=40 08:32:01 Config A/D Result=40 08:32:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:01 Get A/D filter: -9.255963e+061 result=40 08:32:01 Get A/D value=-858993460 result=40 08:32:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:32:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:32:01 Aux= 08:32:01 Message to Camera, serial 117947 queued 08:32:38 Received message from Master: op=PointingHead serial=117960 08:32:38 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:32:38 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:32:38 Point started: ret=0 08:32:38 point_skyscan result=0 08:32:39 Check angles 08:32:39 SkyScan query 08:32:39 SkyScan query done: ret=0 az=136.185<-9079 ze=-6.51<-12434 Statuses=0009 0008 08:32:39 Msec=0 True Az=136.185 Ze=-6.51 Az status=0009 Ze status=0008 08:32:39 Check angles 08:32:39 SkyScan query 08:32:40 SkyScan query done: ret=0 az=153.645<-10243 ze=-6.495<-12433 Statuses=0009 0008 08:32:40 Msec=750 True Az=153.645 Ze=-6.495 Az status=0009 Ze status=0008 08:32:40 Check angles 08:32:40 SkyScan query 08:32:41 SkyScan query done: ret=0 az=171.105<-11407 ze=-6.495<-12433 Statuses=0009 0008 08:32:41 Msec=1500 True Az=171.105 Ze=-6.495 Az status=0009 Ze status=0008 08:32:41 Check angles 08:32:41 SkyScan query 08:32:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:32:41 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:32:41 Message to Master queued w/err=0: serial=117960 error=0 08:32:46 Received message from Master: op=Filter serial=117961 08:32:46 Color wheel filter change from 0 to 0 08:32:46 FLIGetFilterPos err=0 currentPosition=0 08:32:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:32:46 Filter is already there-color wheel unchanged 08:32:47 Received message from Master: op=Shutter serial=117962 08:32:47 Shutter LASER close 08:32:47 Received message from Camera: op=State serial=117964 08:32:47 GetSingleValue result=40 Value=cccccccc 08:32:47 SkyScan query 08:32:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:32:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:47 Parameters OK 08:32:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:47 Set A/D data flow result=40 08:32:47 Set A/D channel type result=40 08:32:47 Set A/D encoding result=40 08:32:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:47 Set channel filter=0.000000e+000 result=40 08:32:47 Config A/D Result=40 08:32:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:47 Get A/D filter: -9.255963e+061 result=40 08:32:47 Get A/D value=-858993460 result=40 08:32:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:47 Parameters OK 08:32:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:47 Set A/D data flow result=40 08:32:47 Set A/D channel type result=40 08:32:47 Set A/D encoding result=40 08:32:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:47 Set channel filter=0.000000e+000 result=40 08:32:47 Config A/D Result=40 08:32:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:47 Get A/D filter: -9.255963e+061 result=40 08:32:47 Get A/D value=-858993460 result=40 08:32:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:32:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:32:47 Aux= 08:32:47 Message to Camera, serial 117964 queued 08:33:24 Received message from Master: op=PointingHead serial=117977 08:33:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:33:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:33:24 Point started: ret=0 08:33:24 point_skyscan result=0 08:33:25 Check angles 08:33:25 SkyScan query 08:33:26 SkyScan query done: ret=0 az=153.075<-10205 ze=6.51<-11566 Statuses=0009 0008 08:33:26 Msec=0 True Az=153.075 Ze=6.51 Az status=0009 Ze status=0008 08:33:26 Check angles 08:33:26 SkyScan query 08:33:26 SkyScan query done: ret=0 az=135.57<-9038 ze=6.495<-11567 Statuses=0009 0008 08:33:26 Msec=750 True Az=135.57 Ze=6.495 Az status=0009 Ze status=0008 08:33:27 Check angles 08:33:27 SkyScan query 08:33:27 SkyScan query done: ret=0 az=117.645<-7843 ze=6.495<-11567 Statuses=0009 0008 08:33:27 Msec=1500 True Az=117.645 Ze=6.495 Az status=0009 Ze status=0008 08:33:27 Check angles 08:33:27 SkyScan query 08:33:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:33:28 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:33:28 Message to Master queued w/err=0: serial=117977 error=0 08:33:33 Received message from Master: op=Filter serial=117978 08:33:33 Color wheel filter change from 0 to 0 08:33:33 FLIGetFilterPos err=0 currentPosition=0 08:33:33 FLIGetStepsRemaining err=0 RemainingSteps=0 08:33:33 Filter is already there-color wheel unchanged 08:33:33 Received message from Master: op=Shutter serial=117979 08:33:33 Shutter LASER close 08:33:33 Received message from Camera: op=State serial=117981 08:33:33 GetSingleValue result=40 Value=cccccccc 08:33:33 SkyScan query 08:33:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:33:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:34 Parameters OK 08:33:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:34 Set A/D data flow result=40 08:33:34 Set A/D channel type result=40 08:33:34 Set A/D encoding result=40 08:33:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:34 Set channel filter=0.000000e+000 result=40 08:33:34 Config A/D Result=40 08:33:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:34 Get A/D filter: -9.255963e+061 result=40 08:33:34 Get A/D value=-858993460 result=40 08:33:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:34 Parameters OK 08:33:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:34 Set A/D data flow result=40 08:33:34 Set A/D channel type result=40 08:33:34 Set A/D encoding result=40 08:33:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:34 Set channel filter=0.000000e+000 result=40 08:33:34 Config A/D Result=40 08:33:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:34 Get A/D filter: -9.255963e+061 result=40 08:33:34 Get A/D value=-858993460 result=40 08:33:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:33:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:33:34 Aux= 08:33:34 Message to Camera, serial 117981 queued 08:33:38 Received message from Master: op=Identify serial=117982 08:34:11 Received message from Master: op=PointingHead serial=117997 08:34:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:34:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:34:11 Point started: ret=0 08:34:11 point_skyscan result=0 08:34:12 Check angles 08:34:12 SkyScan query 08:34:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.19<-13546 Statuses=0008 0009 08:34:12 Msec=0 True Az=112.995 Ze=-23.19 Az status=0008 Ze status=0009 08:34:12 Check angles 08:34:12 SkyScan query 08:34:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.175<-14945 Statuses=0008 0009 08:34:13 Msec=750 True Az=112.995 Ze=-44.175 Az status=0008 Ze status=0009 08:34:13 Check angles 08:34:13 SkyScan query 08:34:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.1<-16340 Statuses=0008 0009 08:34:14 Msec=1500 True Az=112.995 Ze=-65.1 Az status=0008 Ze status=0009 08:34:14 Check angles 08:34:14 SkyScan query 08:34:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.055<-17737 Statuses=0008 0009 [UTC 2019-3-5 08:34:15] 08:34:15 Msec=2250 True Az=112.995 Ze=-86.055 Az status=0008 Ze status=0009 08:34:15 Check angles 08:34:15 SkyScan query 08:34:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.965<-19131 Statuses=0008 0009 08:34:15 Msec=3000 True Az=112.995 Ze=-106.965 Az status=0008 Ze status=0009 08:34:15 Check angles 08:34:15 SkyScan query 08:34:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.92<-20528 Statuses=0008 0009 08:34:16 Msec=3750 True Az=112.995 Ze=-127.92 Az status=0008 Ze status=0009 08:34:16 Check angles 08:34:16 SkyScan query 08:34:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.875<-21925 Statuses=0008 0009 08:34:17 Msec=4500 True Az=112.995 Ze=-148.875 Az status=0008 Ze status=0009 08:34:17 Check angles 08:34:17 SkyScan query 08:34:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.815<-23321 Statuses=0008 0009 08:34:18 Msec=5250 True Az=112.995 Ze=-169.815 Az status=0008 Ze status=0009 08:34:18 Check angles 08:34:18 SkyScan query 08:34:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:34:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:34:18 Message to Master queued w/err=0: serial=117997 error=0 08:34:23 Received message from Master: op=Filter serial=117998 08:34:23 Color wheel filter change from 0 to 0 08:34:23 FLIGetFilterPos err=0 currentPosition=0 08:34:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:34:23 Filter is already there-color wheel unchanged 08:34:23 Received message from Master: op=Shutter serial=117999 08:34:23 Shutter LASER open 08:34:24 Received message from Camera: op=State serial=118001 08:34:24 GetSingleValue result=40 Value=cccccccc 08:34:24 SkyScan query 08:34:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:34:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:24 Parameters OK 08:34:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:24 Set A/D data flow result=40 08:34:24 Set A/D channel type result=40 08:34:24 Set A/D encoding result=40 08:34:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:24 Set channel filter=0.000000e+000 result=40 08:34:24 Config A/D Result=40 08:34:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:24 Get A/D filter: -9.255963e+061 result=40 08:34:24 Get A/D value=-858993460 result=40 08:34:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:24 Parameters OK 08:34:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:24 Set A/D data flow result=40 08:34:24 Set A/D channel type result=40 08:34:24 Set A/D encoding result=40 08:34:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:24 Set channel filter=0.000000e+000 result=40 08:34:24 Config A/D Result=40 08:34:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:24 Get A/D filter: -9.255963e+061 result=40 08:34:24 Get A/D value=-858993460 result=40 08:34:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:34:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:34:24 Aux= 08:34:24 Message to Camera, serial 118001 queued 08:34:33 Received message from Master: op=Shutter serial=118011 08:34:33 Shutter LASER close 08:34:33 Received message from Master: op=PointingHead serial=118015 08:34:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:34:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:34:33 Point started: ret=0 08:34:33 point_skyscan result=0 08:34:34 Check angles 08:34:34 SkyScan query 08:34:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 08:34:35 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 08:34:35 Check angles 08:34:35 SkyScan query 08:34:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.325<-20155 Statuses=0008 0009 08:34:36 Msec=750 True Az=112.995 Ze=-122.325 Az status=0008 Ze status=0009 08:34:36 Check angles 08:34:36 SkyScan query 08:34:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.37<-18758 Statuses=0008 0009 08:34:36 Msec=1500 True Az=112.995 Ze=-101.37 Az status=0008 Ze status=0009 08:34:36 Check angles 08:34:36 SkyScan query 08:34:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.415<-17361 Statuses=0008 0009 08:34:37 Msec=2250 True Az=112.995 Ze=-80.415 Az status=0008 Ze status=0009 08:34:37 Check angles 08:34:37 SkyScan query 08:34:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.46<-15964 Statuses=0008 0009 08:34:38 Msec=3000 True Az=112.995 Ze=-59.46 Az status=0008 Ze status=0009 08:34:38 Check angles 08:34:38 SkyScan query 08:34:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.475<-14565 Statuses=0008 0009 08:34:39 Msec=3750 True Az=112.995 Ze=-38.475 Az status=0008 Ze status=0009 08:34:39 Check angles 08:34:39 SkyScan query 08:34:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.52<-13168 Statuses=0008 0009 08:34:39 Msec=4500 True Az=112.995 Ze=-17.52 Az status=0008 Ze status=0009 08:34:39 Check angles 08:34:39 SkyScan query 08:34:40 SkyScan query done: ret=0 az=112.98<-7532 ze=3.435<-11771 Statuses=0008 0009 08:34:40 Msec=5250 True Az=112.98 Ze=3.435 Az status=0008 Ze status=0009 08:34:40 Check angles 08:34:40 SkyScan query 08:34:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:34:41 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:34:41 Message to Master queued w/err=0: serial=118015 error=0 08:34:46 Received message from Master: op=Filter serial=118016 08:34:46 Color wheel filter change from 0 to 0 08:34:46 FLIGetFilterPos err=0 currentPosition=0 08:34:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:34:46 Filter is already there-color wheel unchanged 08:34:46 Received message from Master: op=Shutter serial=118017 08:34:46 Shutter LASER close 08:34:46 Received message from Camera: op=State serial=118019 08:34:46 GetSingleValue result=40 Value=cccccccc 08:34:46 SkyScan query 08:34:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:34:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:47 Parameters OK 08:34:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:47 Set A/D data flow result=40 08:34:47 Set A/D channel type result=40 08:34:47 Set A/D encoding result=40 08:34:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:47 Set channel filter=0.000000e+000 result=40 08:34:47 Config A/D Result=40 08:34:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:47 Get A/D filter: -9.255963e+061 result=40 08:34:47 Get A/D value=-858993460 result=40 08:34:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:47 Parameters OK 08:34:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:47 Set A/D data flow result=40 08:34:47 Set A/D channel type result=40 08:34:47 Set A/D encoding result=40 08:34:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:47 Set channel filter=0.000000e+000 result=40 08:34:47 Config A/D Result=40 08:34:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:47 Get A/D filter: -9.255963e+061 result=40 08:34:47 Get A/D value=-858993460 result=40 08:34:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:34:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:34:47 Aux= 08:34:47 Message to Camera, serial 118019 queued 08:35:24 Received message from Master: op=PointingHead serial=118032 08:35:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:35:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:35:24 Point started: ret=0 08:35:24 point_skyscan result=0 08:35:25 Check angles 08:35:25 SkyScan query 08:35:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:35:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:35:25 Message to Master queued w/err=0: serial=118032 error=0 08:35:30 Received message from Master: op=Filter serial=118033 08:35:30 Color wheel filter change from 0 to 0 08:35:30 FLIGetFilterPos err=0 currentPosition=0 08:35:30 FLIGetStepsRemaining err=0 RemainingSteps=0 08:35:30 Filter is already there-color wheel unchanged 08:35:30 Received message from Master: op=Shutter serial=118034 08:35:30 Shutter LASER close 08:35:30 Received message from Camera: op=State serial=118036 08:35:30 GetSingleValue result=40 Value=cccccccc 08:35:30 SkyScan query 08:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:35:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:31 Parameters OK 08:35:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:31 Set A/D data flow result=40 08:35:31 Set A/D channel type result=40 08:35:31 Set A/D encoding result=40 08:35:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:31 Set channel filter=0.000000e+000 result=40 08:35:31 Config A/D Result=40 08:35:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:31 Get A/D filter: -9.255963e+061 result=40 08:35:31 Get A/D value=-858993460 result=40 08:35:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:31 Parameters OK 08:35:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:31 Set A/D data flow result=40 08:35:31 Set A/D channel type result=40 08:35:31 Set A/D encoding result=40 08:35:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:31 Set channel filter=0.000000e+000 result=40 08:35:31 Config A/D Result=40 08:35:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:31 Get A/D filter: -9.255963e+061 result=40 08:35:31 Get A/D value=-858993460 result=40 08:35:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:35:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:35:31 Aux= 08:35:31 Message to Camera, serial 118036 queued 08:36:08 Received message from Master: op=PointingHead serial=118049 08:36:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:36:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:36:08 Point started: ret=0 08:36:08 point_skyscan result=0 08:36:09 Check angles 08:36:09 SkyScan query 08:36:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:36:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:36:10 Message to Master queued w/err=0: serial=118049 error=0 08:36:15 Received message from Master: op=Filter serial=118050 08:36:15 Color wheel filter change from 0 to 0 08:36:15 FLIGetFilterPos err=0 currentPosition=0 08:36:15 FLIGetStepsRemaining err=0 RemainingSteps=0 08:36:15 Filter is already there-color wheel unchanged 08:36:15 Received message from Master: op=Shutter serial=118051 08:36:15 Shutter LASER close 08:36:15 Received message from Camera: op=State serial=118053 08:36:15 GetSingleValue result=40 Value=cccccccc 08:36:15 SkyScan query 08:36:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:36:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:15 Parameters OK 08:36:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:15 Set A/D data flow result=40 08:36:15 Set A/D channel type result=40 08:36:15 Set A/D encoding result=40 08:36:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:15 Set channel filter=0.000000e+000 result=40 08:36:15 Config A/D Result=40 08:36:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:15 Get A/D filter: -9.255963e+061 result=40 08:36:15 Get A/D value=-858993460 result=40 08:36:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:15 Parameters OK 08:36:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:15 Set A/D data flow result=40 08:36:15 Set A/D channel type result=40 08:36:15 Set A/D encoding result=40 08:36:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:15 Set channel filter=0.000000e+000 result=40 08:36:15 Config A/D Result=40 08:36:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:15 Get A/D filter: -9.255963e+061 result=40 08:36:15 Get A/D value=-858993460 result=40 08:36:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:36:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:36:15 Aux= 08:36:15 Message to Camera, serial 118053 queued 08:36:52 Received message from Master: op=PointingHead serial=118066 08:36:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:36:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:36:52 Point started: ret=0 08:36:52 point_skyscan result=0 08:36:53 Check angles 08:36:53 SkyScan query 08:36:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:36:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:36:54 Message to Master queued w/err=0: serial=118066 error=0 08:36:59 Received message from Master: op=Filter serial=118067 08:36:59 Color wheel filter change from 0 to 0 08:36:59 FLIGetFilterPos err=0 currentPosition=0 08:36:59 FLIGetStepsRemaining err=0 RemainingSteps=0 08:36:59 Filter is already there-color wheel unchanged 08:36:59 Received message from Master: op=Shutter serial=118068 08:36:59 Shutter LASER close 08:36:59 Received message from Camera: op=State serial=118070 08:36:59 GetSingleValue result=40 Value=cccccccc 08:36:59 SkyScan query 08:37:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:37:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:00 Parameters OK 08:37:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:00 Set A/D data flow result=40 08:37:00 Set A/D channel type result=40 08:37:00 Set A/D encoding result=40 08:37:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:00 Set channel filter=0.000000e+000 result=40 08:37:00 Config A/D Result=40 08:37:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:00 Get A/D filter: -9.255963e+061 result=40 08:37:00 Get A/D value=-858993460 result=40 08:37:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:00 Parameters OK 08:37:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:00 Set A/D data flow result=40 08:37:00 Set A/D channel type result=40 08:37:00 Set A/D encoding result=40 08:37:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:00 Set channel filter=0.000000e+000 result=40 08:37:00 Config A/D Result=40 08:37:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:00 Get A/D filter: -9.255963e+061 result=40 08:37:00 Get A/D value=-858993460 result=40 08:37:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:37:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:37:00 Aux= 08:37:00 Message to Camera, serial 118070 queued 08:37:37 Received message from Master: op=PointingHead serial=118083 08:37:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:37:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:37:37 Point started: ret=0 08:37:37 point_skyscan result=0 08:37:38 Check angles 08:37:38 SkyScan query 08:37:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 08:37:38 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 08:37:38 Check angles 08:37:38 SkyScan query 08:37:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 08:37:39 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 08:37:39 Check angles 08:37:39 SkyScan query 08:37:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.295<-16353 Statuses=0008 0009 08:37:40 Msec=1500 True Az=112.995 Ze=-65.295 Az status=0008 Ze status=0009 08:37:40 Check angles 08:37:40 SkyScan query 08:37:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.235<-17749 Statuses=0008 0009 08:37:40 Msec=2250 True Az=112.995 Ze=-86.235 Az status=0008 Ze status=0009 08:37:41 Check angles 08:37:41 SkyScan query 08:37:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.19<-19146 Statuses=0008 0009 08:37:41 Msec=3000 True Az=112.995 Ze=-107.19 Az status=0008 Ze status=0009 08:37:41 Check angles 08:37:41 SkyScan query 08:37:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.13<-20542 Statuses=0008 0009 08:37:42 Msec=3750 True Az=112.995 Ze=-128.13 Az status=0008 Ze status=0009 08:37:42 Check angles 08:37:42 SkyScan query 08:37:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.085<-21939 Statuses=0008 0009 08:37:43 Msec=4500 True Az=112.995 Ze=-149.085 Az status=0008 Ze status=0009 08:37:43 Check angles 08:37:43 SkyScan query 08:37:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.04<-23336 Statuses=0008 0009 08:37:43 Msec=5250 True Az=112.995 Ze=-170.04 Az status=0008 Ze status=0009 08:37:44 Check angles 08:37:44 SkyScan query 08:37:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:37:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:37:44 Message to Master queued w/err=0: serial=118083 error=0 08:37:49 Received message from Master: op=Filter serial=118084 08:37:49 Color wheel filter change from 0 to 0 08:37:49 FLIGetFilterPos err=0 currentPosition=0 08:37:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:37:49 Filter is already there-color wheel unchanged 08:37:49 Received message from Master: op=Shutter serial=118085 08:37:49 Shutter LASER open 08:37:50 Received message from Camera: op=State serial=118087 08:37:50 GetSingleValue result=40 Value=cccccccc 08:37:50 SkyScan query 08:37:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:37:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:50 Parameters OK 08:37:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:50 Set A/D data flow result=40 08:37:50 Set A/D channel type result=40 08:37:50 Set A/D encoding result=40 08:37:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:50 Set channel filter=0.000000e+000 result=40 08:37:50 Config A/D Result=40 08:37:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:50 Get A/D filter: -9.255963e+061 result=40 08:37:50 Get A/D value=-858993460 result=40 08:37:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:50 Parameters OK 08:37:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:50 Set A/D data flow result=40 08:37:50 Set A/D channel type result=40 08:37:50 Set A/D encoding result=40 08:37:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:50 Set channel filter=0.000000e+000 result=40 08:37:50 Config A/D Result=40 08:37:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:50 Get A/D filter: -9.255963e+061 result=40 08:37:50 Get A/D value=-858993460 result=40 08:37:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:37:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:37:50 Aux= 08:37:50 Message to Camera, serial 118087 queued 08:37:59 Received message from Master: op=Shutter serial=118097 08:37:59 Shutter LASER close 08:37:59 Received message from Master: op=PointingHead serial=118101 08:37:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:37:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:37:59 Point started: ret=0 08:37:59 point_skyscan result=0 08:38:00 Check angles 08:38:00 SkyScan query 08:38:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 08:38:01 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 08:38:01 Check angles 08:38:01 SkyScan query 08:38:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.28<-20152 Statuses=0008 0009 08:38:02 Msec=750 True Az=112.995 Ze=-122.28 Az status=0008 Ze status=0009 08:38:02 Check angles 08:38:02 SkyScan query 08:38:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.86<-18724 Statuses=0008 0009 08:38:02 Msec=1500 True Az=112.995 Ze=-100.86 Az status=0008 Ze status=0009 08:38:02 Check angles 08:38:02 SkyScan query 08:38:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.89<-17326 Statuses=0008 0009 08:38:03 Msec=2250 True Az=112.995 Ze=-79.89 Az status=0008 Ze status=0009 08:38:03 Check angles 08:38:03 SkyScan query 08:38:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.95<-15930 Statuses=0008 0009 08:38:04 Msec=3000 True Az=112.995 Ze=-58.95 Az status=0008 Ze status=0009 08:38:04 Check angles 08:38:04 SkyScan query 08:38:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.935<-14529 Statuses=0008 0009 08:38:05 Msec=3750 True Az=112.995 Ze=-37.935 Az status=0008 Ze status=0009 08:38:05 Check angles 08:38:05 SkyScan query 08:38:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.01<-13134 Statuses=0008 0009 08:38:05 Msec=4500 True Az=112.995 Ze=-17.01 Az status=0008 Ze status=0009 08:38:05 Check angles 08:38:05 SkyScan query 08:38:06 SkyScan query done: ret=0 az=112.995<-7533 ze=3.945<-11737 Statuses=0008 0009 08:38:06 Msec=5250 True Az=112.995 Ze=3.945 Az status=0008 Ze status=0009 08:38:06 Check angles 08:38:06 SkyScan query 08:38:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:38:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:38:07 Message to Master queued w/err=0: serial=118101 error=0 08:38:12 Received message from Master: op=Filter serial=118102 08:38:12 Color wheel filter change from 0 to 0 08:38:12 FLIGetFilterPos err=0 currentPosition=0 08:38:12 FLIGetStepsRemaining err=0 RemainingSteps=0 08:38:12 Filter is already there-color wheel unchanged 08:38:12 Received message from Master: op=Shutter serial=118103 08:38:12 Shutter LASER close 08:38:12 Received message from Camera: op=State serial=118105 08:38:12 GetSingleValue result=40 Value=cccccccc 08:38:12 SkyScan query 08:38:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:38:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:13 Parameters OK 08:38:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:13 Set A/D data flow result=40 08:38:13 Set A/D channel type result=40 08:38:13 Set A/D encoding result=40 08:38:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:13 Set channel filter=0.000000e+000 result=40 08:38:13 Config A/D Result=40 08:38:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:13 Get A/D filter: -9.255963e+061 result=40 08:38:13 Get A/D value=-858993460 result=40 08:38:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:13 Parameters OK 08:38:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:13 Set A/D data flow result=40 08:38:13 Set A/D channel type result=40 08:38:13 Set A/D encoding result=40 08:38:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:13 Set channel filter=0.000000e+000 result=40 08:38:13 Config A/D Result=40 08:38:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:13 Get A/D filter: -9.255963e+061 result=40 08:38:13 Get A/D value=-858993460 result=40 08:38:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:38:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:38:13 Aux= 08:38:13 Message to Camera, serial 118105 queued 08:38:49 Received message from Master: op=PointingHead serial=118117 08:38:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:38:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:38:49 Point started: ret=0 08:38:49 point_skyscan result=0 08:38:50 Check angles 08:38:50 SkyScan query 08:38:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:38:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:38:50 Message to Master queued w/err=0: serial=118117 error=0 08:38:55 Received message from Master: op=Filter serial=118118 08:38:55 Color wheel filter change from 0 to 0 08:38:55 FLIGetFilterPos err=0 currentPosition=0 08:38:55 FLIGetStepsRemaining err=0 RemainingSteps=0 08:38:55 Filter is already there-color wheel unchanged 08:38:55 Received message from Master: op=Shutter serial=118119 08:38:55 Shutter LASER close 08:38:55 Received message from Camera: op=State serial=118121 08:38:55 GetSingleValue result=40 Value=cccccccc 08:38:55 SkyScan query 08:38:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:38:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:56 Parameters OK 08:38:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:56 Set A/D data flow result=40 08:38:56 Set A/D channel type result=40 08:38:56 Set A/D encoding result=40 08:38:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:56 Set channel filter=0.000000e+000 result=40 08:38:56 Config A/D Result=40 08:38:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:56 Get A/D filter: -9.255963e+061 result=40 08:38:56 Get A/D value=-858993460 result=40 08:38:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:56 Parameters OK 08:38:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:56 Set A/D data flow result=40 08:38:56 Set A/D channel type result=40 08:38:56 Set A/D encoding result=40 08:38:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:56 Set channel filter=0.000000e+000 result=40 08:38:56 Config A/D Result=40 08:38:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:56 Get A/D filter: -9.255963e+061 result=40 08:38:56 Get A/D value=-858993460 result=40 08:38:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:38:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:38:56 Aux= 08:38:56 Message to Camera, serial 118121 queued 08:39:33 Received message from Master: op=PointingHead serial=118134 08:39:33 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:39:33 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:39:33 Point started: ret=0 08:39:33 point_skyscan result=0 08:39:34 Check angles 08:39:34 SkyScan query 08:39:35 SkyScan query done: ret=0 az=135.72<-9048 ze=-6.51<-12434 Statuses=0009 0008 08:39:35 Msec=0 True Az=135.72 Ze=-6.51 Az status=0009 Ze status=0008 08:39:35 Check angles 08:39:35 SkyScan query 08:39:35 SkyScan query done: ret=0 az=153.285<-10219 ze=-6.495<-12433 Statuses=0009 0008 08:39:35 Msec=750 True Az=153.285 Ze=-6.495 Az status=0009 Ze status=0008 08:39:35 Check angles 08:39:35 SkyScan query 08:39:36 SkyScan query done: ret=0 az=170.7<-11380 ze=-6.495<-12433 Statuses=0009 0008 08:39:36 Msec=1500 True Az=170.7 Ze=-6.495 Az status=0009 Ze status=0008 08:39:36 Check angles 08:39:36 SkyScan query 08:39:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:39:37 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:39:37 Message to Master queued w/err=0: serial=118134 error=0 08:39:42 Received message from Master: op=Filter serial=118135 08:39:42 Color wheel filter change from 0 to 0 08:39:42 FLIGetFilterPos err=0 currentPosition=0 08:39:42 FLIGetStepsRemaining err=0 RemainingSteps=0 08:39:42 Filter is already there-color wheel unchanged 08:39:42 Received message from Master: op=Shutter serial=118136 08:39:42 Shutter LASER close 08:39:42 Received message from Camera: op=State serial=118138 08:39:42 GetSingleValue result=40 Value=cccccccc 08:39:42 SkyScan query 08:39:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:39:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:43 Parameters OK 08:39:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:43 Set A/D data flow result=40 08:39:43 Set A/D channel type result=40 08:39:43 Set A/D encoding result=40 08:39:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:43 Set channel filter=0.000000e+000 result=40 08:39:43 Config A/D Result=40 08:39:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:43 Get A/D filter: -9.255963e+061 result=40 08:39:43 Get A/D value=-858993460 result=40 08:39:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:43 Parameters OK 08:39:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:43 Set A/D data flow result=40 08:39:43 Set A/D channel type result=40 08:39:43 Set A/D encoding result=40 08:39:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:43 Set channel filter=0.000000e+000 result=40 08:39:43 Config A/D Result=40 08:39:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:43 Get A/D filter: -9.255963e+061 result=40 08:39:43 Get A/D value=-858993460 result=40 08:39:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:39:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:39:43 Aux= 08:39:43 Message to Camera, serial 118138 queued 08:40:19 Received message from Master: op=PointingHead serial=118151 08:40:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:40:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:40:20 Point started: ret=0 08:40:20 point_skyscan result=0 08:40:21 Check angles 08:40:21 SkyScan query 08:40:21 SkyScan query done: ret=0 az=152.7<-10180 ze=6.51<-11566 Statuses=0009 0008 08:40:21 Msec=0 True Az=152.7 Ze=6.51 Az status=0009 Ze status=0008 08:40:21 Check angles 08:40:21 SkyScan query 08:40:22 SkyScan query done: ret=0 az=135.255<-9017 ze=6.495<-11567 Statuses=0009 0008 08:40:22 Msec=750 True Az=135.255 Ze=6.495 Az status=0009 Ze status=0008 08:40:22 Check angles 08:40:22 SkyScan query 08:40:23 SkyScan query done: ret=0 az=117.645<-7843 ze=6.495<-11567 Statuses=0009 0008 08:40:23 Msec=1500 True Az=117.645 Ze=6.495 Az status=0009 Ze status=0008 08:40:23 Check angles 08:40:23 SkyScan query 08:40:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:40:23 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:40:23 Message to Master queued w/err=0: serial=118151 error=0 08:40:28 Received message from Master: op=Filter serial=118152 08:40:28 Color wheel filter change from 0 to 0 08:40:28 FLIGetFilterPos err=0 currentPosition=0 08:40:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:40:28 Filter is already there-color wheel unchanged 08:40:29 Received message from Master: op=Shutter serial=118153 08:40:29 Shutter LASER close 08:40:29 Received message from Camera: op=State serial=118155 08:40:29 GetSingleValue result=40 Value=cccccccc 08:40:29 SkyScan query 08:40:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:40:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:29 Parameters OK 08:40:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:29 Set A/D data flow result=40 08:40:29 Set A/D channel type result=40 08:40:29 Set A/D encoding result=40 08:40:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:29 Set channel filter=0.000000e+000 result=40 08:40:29 Config A/D Result=40 08:40:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:29 Get A/D filter: -9.255963e+061 result=40 08:40:29 Get A/D value=-858993460 result=40 08:40:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:29 Parameters OK 08:40:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:29 Set A/D data flow result=40 08:40:29 Set A/D channel type result=40 08:40:29 Set A/D encoding result=40 08:40:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:29 Set channel filter=0.000000e+000 result=40 08:40:29 Config A/D Result=40 08:40:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:29 Get A/D filter: -9.255963e+061 result=40 08:40:29 Get A/D value=-858993460 result=40 08:40:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:40:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:40:29 Aux= 08:40:29 Message to Camera, serial 118155 queued 08:41:06 Received message from Master: op=PointingHead serial=118168 08:41:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:41:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:41:06 Point started: ret=0 08:41:06 point_skyscan result=0 08:41:07 Check angles 08:41:07 SkyScan query 08:41:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 08:41:08 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 08:41:08 Check angles 08:41:08 SkyScan query 08:41:08 SkyScan query done: ret=0 az=112.98<-7532 ze=-44.265<-14951 Statuses=0008 0009 08:41:08 Msec=750 True Az=112.98 Ze=-44.265 Az status=0008 Ze status=0009 08:41:09 Check angles 08:41:09 SkyScan query 08:41:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.175<-16345 Statuses=0008 0009 08:41:09 Msec=1500 True Az=112.995 Ze=-65.175 Az status=0008 Ze status=0009 08:41:09 Check angles 08:41:09 SkyScan query 08:41:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.535<-17769 Statuses=0008 0009 08:41:10 Msec=2250 True Az=112.995 Ze=-86.535 Az status=0008 Ze status=0009 08:41:10 Check angles 08:41:10 SkyScan query 08:41:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.505<-19167 Statuses=0008 0009 08:41:11 Msec=3000 True Az=112.995 Ze=-107.505 Az status=0008 Ze status=0009 08:41:11 Check angles 08:41:11 SkyScan query 08:41:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.445<-20563 Statuses=0008 0009 08:41:11 Msec=3750 True Az=112.995 Ze=-128.445 Az status=0008 Ze status=0009 08:41:12 Check angles 08:41:12 SkyScan query 08:41:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.91<-21994 Statuses=0008 0009 08:41:12 Msec=4500 True Az=112.995 Ze=-149.91 Az status=0008 Ze status=0009 08:41:12 Check angles 08:41:12 SkyScan query 08:41:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.79<-23386 Statuses=0008 0009 08:41:13 Msec=5250 True Az=112.995 Ze=-170.79 Az status=0008 Ze status=0009 08:41:13 Check angles 08:41:13 SkyScan query 08:41:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:41:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:41:14 Message to Master queued w/err=0: serial=118168 error=0 08:41:19 Received message from Master: op=Filter serial=118169 08:41:19 Color wheel filter change from 0 to 0 08:41:19 FLIGetFilterPos err=0 currentPosition=0 08:41:19 FLIGetStepsRemaining err=0 RemainingSteps=0 08:41:19 Filter is already there-color wheel unchanged 08:41:19 Received message from Master: op=Shutter serial=118170 08:41:19 Shutter LASER open 08:41:19 Received message from Camera: op=State serial=118172 08:41:19 GetSingleValue result=40 Value=cccccccc 08:41:19 SkyScan query 08:41:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:41:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:20 Parameters OK 08:41:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:20 Set A/D data flow result=40 08:41:20 Set A/D channel type result=40 08:41:20 Set A/D encoding result=40 08:41:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:20 Set channel filter=0.000000e+000 result=40 08:41:20 Config A/D Result=40 08:41:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:20 Get A/D filter: -9.255963e+061 result=40 08:41:20 Get A/D value=-858993460 result=40 08:41:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:20 Parameters OK 08:41:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:20 Set A/D data flow result=40 08:41:20 Set A/D channel type result=40 08:41:20 Set A/D encoding result=40 08:41:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:20 Set channel filter=0.000000e+000 result=40 08:41:20 Config A/D Result=40 08:41:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:20 Get A/D filter: -9.255963e+061 result=40 08:41:20 Get A/D value=-858993460 result=40 08:41:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:41:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:41:20 Aux= 08:41:20 Message to Camera, serial 118172 queued 08:41:28 Received message from Master: op=Shutter serial=118182 08:41:28 Shutter LASER close 08:41:29 Received message from Master: op=PointingHead serial=118186 08:41:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:41:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:41:29 Point started: ret=0 08:41:29 point_skyscan result=0 08:41:30 Check angles 08:41:30 SkyScan query 08:41:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 08:41:30 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 08:41:30 Check angles 08:41:30 SkyScan query 08:41:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 08:41:31 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 08:41:31 Check angles 08:41:31 SkyScan query 08:41:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.085<-18739 Statuses=0008 0009 08:41:32 Msec=1500 True Az=112.995 Ze=-101.085 Az status=0008 Ze status=0009 08:41:32 Check angles 08:41:32 SkyScan query 08:41:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 08:41:32 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 08:41:33 Check angles 08:41:33 SkyScan query 08:41:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 08:41:33 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 08:41:33 Check angles 08:41:33 SkyScan query 08:41:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.13<-14542 Statuses=0008 0009 08:41:34 Msec=3750 True Az=112.995 Ze=-38.13 Az status=0008 Ze status=0009 08:41:34 Check angles 08:41:34 SkyScan query 08:41:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.19<-13146 Statuses=0008 0009 08:41:35 Msec=4500 True Az=112.995 Ze=-17.19 Az status=0008 Ze status=0009 08:41:35 Check angles 08:41:35 SkyScan query 08:41:35 SkyScan query done: ret=0 az=112.995<-7533 ze=3.765<-11749 Statuses=0008 0009 08:41:35 Msec=5250 True Az=112.995 Ze=3.765 Az status=0008 Ze status=0009 08:41:36 Check angles 08:41:36 SkyScan query 08:41:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:41:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:41:36 Message to Master queued w/err=0: serial=118186 error=0 08:41:41 Received message from Master: op=Filter serial=118187 08:41:41 Color wheel filter change from 0 to 0 08:41:41 FLIGetFilterPos err=0 currentPosition=0 08:41:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:41:41 Filter is already there-color wheel unchanged 08:41:41 Received message from Master: op=Shutter serial=118188 08:41:41 Shutter LASER close 08:41:42 Received message from Camera: op=State serial=118190 08:41:42 GetSingleValue result=40 Value=cccccccc 08:41:42 SkyScan query 08:41:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:41:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:42 Parameters OK 08:41:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:42 Set A/D data flow result=40 08:41:42 Set A/D channel type result=40 08:41:42 Set A/D encoding result=40 08:41:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:42 Set channel filter=0.000000e+000 result=40 08:41:42 Config A/D Result=40 08:41:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:42 Get A/D filter: -9.255963e+061 result=40 08:41:42 Get A/D value=-858993460 result=40 08:41:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:42 Parameters OK 08:41:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:42 Set A/D data flow result=40 08:41:42 Set A/D channel type result=40 08:41:42 Set A/D encoding result=40 08:41:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:42 Set channel filter=0.000000e+000 result=40 08:41:42 Config A/D Result=40 08:41:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:42 Get A/D filter: -9.255963e+061 result=40 08:41:42 Get A/D value=-858993460 result=40 08:41:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:41:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:41:42 Aux= 08:41:42 Message to Camera, serial 118190 queued 08:42:18 Received message from Master: op=PointingHead serial=118202 08:42:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:42:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:42:18 Point started: ret=0 08:42:18 point_skyscan result=0 08:42:19 Check angles 08:42:19 SkyScan query 08:42:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:42:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:42:20 Message to Master queued w/err=0: serial=118202 error=0 08:42:25 Received message from Master: op=Filter serial=118203 08:42:25 Color wheel filter change from 0 to 0 08:42:25 FLIGetFilterPos err=0 currentPosition=0 08:42:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:25 Filter is already there-color wheel unchanged 08:42:25 Received message from Master: op=Shutter serial=118204 08:42:25 Shutter LASER close 08:42:25 Received message from Camera: op=State serial=118206 08:42:25 GetSingleValue result=40 Value=cccccccc 08:42:25 SkyScan query 08:42:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:42:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:25 Parameters OK 08:42:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:25 Set A/D data flow result=40 08:42:25 Set A/D channel type result=40 08:42:25 Set A/D encoding result=40 08:42:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:25 Set channel filter=0.000000e+000 result=40 08:42:25 Config A/D Result=40 08:42:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:25 Get A/D filter: -9.255963e+061 result=40 08:42:25 Get A/D value=-858993460 result=40 08:42:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:25 Parameters OK 08:42:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:25 Set A/D data flow result=40 08:42:25 Set A/D channel type result=40 08:42:25 Set A/D encoding result=40 08:42:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:25 Set channel filter=0.000000e+000 result=40 08:42:25 Config A/D Result=40 08:42:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:25 Get A/D filter: -9.255963e+061 result=40 08:42:25 Get A/D value=-858993460 result=40 08:42:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:25 Aux= 08:42:25 Message to Camera, serial 118206 queued 08:43:02 Received message from Master: op=PointingHead serial=118219 08:43:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:43:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:43:03 Point started: ret=0 08:43:03 point_skyscan result=0 08:43:03 Check angles 08:43:03 SkyScan query 08:43:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:43:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:43:04 Message to Master queued w/err=0: serial=118219 error=0 08:43:09 Received message from Master: op=Filter serial=118220 08:43:09 Color wheel filter change from 0 to 0 08:43:09 FLIGetFilterPos err=0 currentPosition=0 08:43:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:43:09 Filter is already there-color wheel unchanged 08:43:09 Received message from Master: op=Shutter serial=118221 08:43:09 Shutter LASER close 08:43:09 Received message from Camera: op=State serial=118223 08:43:09 GetSingleValue result=40 Value=cccccccc 08:43:09 SkyScan query 08:43:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:43:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:10 Parameters OK 08:43:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:10 Set A/D data flow result=40 08:43:10 Set A/D channel type result=40 08:43:10 Set A/D encoding result=40 08:43:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:10 Set channel filter=0.000000e+000 result=40 08:43:10 Config A/D Result=40 08:43:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:10 Get A/D filter: -9.255963e+061 result=40 08:43:10 Get A/D value=-858993460 result=40 08:43:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:10 Parameters OK 08:43:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:10 Set A/D data flow result=40 08:43:10 Set A/D channel type result=40 08:43:10 Set A/D encoding result=40 08:43:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:10 Set channel filter=0.000000e+000 result=40 08:43:10 Config A/D Result=40 08:43:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:10 Get A/D filter: -9.255963e+061 result=40 08:43:10 Get A/D value=-858993460 result=40 08:43:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:43:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:43:10 Aux= 08:43:10 Message to Camera, serial 118223 queued 08:43:47 Received message from Master: op=PointingHead serial=118236 08:43:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:43:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:43:47 Point started: ret=0 08:43:47 point_skyscan result=0 08:43:48 Check angles 08:43:48 SkyScan query 08:43:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:43:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:43:48 Message to Master queued w/err=0: serial=118236 error=0 [UTC 2019-3-5 08:43:50] 08:43:53 Received message from Master: op=Filter serial=118237 08:43:53 Color wheel filter change from 0 to 0 08:43:53 FLIGetFilterPos err=0 currentPosition=0 08:43:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:43:53 Filter is already there-color wheel unchanged 08:43:53 Received message from Master: op=Shutter serial=118238 08:43:53 Shutter LASER close 08:43:53 Received message from Camera: op=State serial=118240 08:43:53 GetSingleValue result=40 Value=cccccccc 08:43:53 SkyScan query 08:43:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:43:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:54 Parameters OK 08:43:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:54 Set A/D data flow result=40 08:43:54 Set A/D channel type result=40 08:43:54 Set A/D encoding result=40 08:43:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:54 Set channel filter=0.000000e+000 result=40 08:43:54 Config A/D Result=40 08:43:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:54 Get A/D filter: -9.255963e+061 result=40 08:43:54 Get A/D value=-858993460 result=40 08:43:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:54 Parameters OK 08:43:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:54 Set A/D data flow result=40 08:43:54 Set A/D channel type result=40 08:43:54 Set A/D encoding result=40 08:43:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:54 Set channel filter=0.000000e+000 result=40 08:43:54 Config A/D Result=40 08:43:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:54 Get A/D filter: -9.255963e+061 result=40 08:43:54 Get A/D value=-858993460 result=40 08:43:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:43:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:43:54 Aux= 08:43:54 Message to Camera, serial 118240 queued 08:44:31 Received message from Master: op=PointingHead serial=118253 08:44:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:44:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:44:31 Point started: ret=0 08:44:31 point_skyscan result=0 08:44:32 Check angles 08:44:32 SkyScan query 08:44:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 08:44:33 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 08:44:33 Check angles 08:44:33 SkyScan query 08:44:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 08:44:33 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 08:44:33 Check angles 08:44:33 SkyScan query 08:44:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.565<-16371 Statuses=0008 0009 08:44:34 Msec=1500 True Az=112.995 Ze=-65.565 Az status=0008 Ze status=0009 08:44:34 Check angles 08:44:34 SkyScan query 08:44:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.505<-17767 Statuses=0008 0009 08:44:35 Msec=2250 True Az=112.995 Ze=-86.505 Az status=0008 Ze status=0009 08:44:35 Check angles 08:44:35 SkyScan query 08:44:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.46<-19164 Statuses=0008 0009 08:44:36 Msec=3000 True Az=112.995 Ze=-107.46 Az status=0008 Ze status=0009 08:44:36 Check angles 08:44:36 SkyScan query 08:44:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.4<-20560 Statuses=0008 0009 08:44:36 Msec=3750 True Az=112.995 Ze=-128.4 Az status=0008 Ze status=0009 08:44:36 Check angles 08:44:36 SkyScan query 08:44:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.4<-21960 Statuses=0008 0009 08:44:37 Msec=4500 True Az=112.995 Ze=-149.4 Az status=0008 Ze status=0009 08:44:37 Check angles 08:44:37 SkyScan query 08:44:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.34<-23356 Statuses=0008 0009 08:44:38 Msec=5250 True Az=112.995 Ze=-170.34 Az status=0008 Ze status=0009 08:44:38 Check angles 08:44:38 SkyScan query 08:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:44:39 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:44:39 Message to Master queued w/err=0: serial=118253 error=0 08:44:44 Received message from Master: op=Filter serial=118254 08:44:44 Color wheel filter change from 0 to 0 08:44:44 FLIGetFilterPos err=0 currentPosition=0 08:44:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:44:44 Filter is already there-color wheel unchanged 08:44:44 Received message from Master: op=Shutter serial=118255 08:44:44 Shutter LASER open 08:44:44 Received message from Camera: op=State serial=118257 08:44:44 GetSingleValue result=40 Value=cccccccc 08:44:44 SkyScan query 08:44:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:44:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:44 Parameters OK 08:44:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:44 Set A/D data flow result=40 08:44:44 Set A/D channel type result=40 08:44:44 Set A/D encoding result=40 08:44:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:44 Set channel filter=0.000000e+000 result=40 08:44:44 Config A/D Result=40 08:44:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:44 Get A/D filter: -9.255963e+061 result=40 08:44:44 Get A/D value=-858993460 result=40 08:44:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:44 Parameters OK 08:44:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:44 Set A/D data flow result=40 08:44:44 Set A/D channel type result=40 08:44:44 Set A/D encoding result=40 08:44:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:44 Set channel filter=0.000000e+000 result=40 08:44:44 Config A/D Result=40 08:44:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:44 Get A/D filter: -9.255963e+061 result=40 08:44:44 Get A/D value=-858993460 result=40 08:44:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:44:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:44:44 Aux= 08:44:44 Message to Camera, serial 118257 queued 08:44:53 Received message from Master: op=Shutter serial=118267 08:44:53 Shutter LASER close 08:44:53 Received message from Master: op=PointingHead serial=118271 08:44:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:44:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:44:54 Point started: ret=0 08:44:54 point_skyscan result=0 08:44:55 Check angles 08:44:55 SkyScan query 08:44:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.025<-21535 Statuses=0008 0009 08:44:55 Msec=0 True Az=112.995 Ze=-143.025 Az status=0008 Ze status=0009 08:44:55 Check angles 08:44:55 SkyScan query 08:44:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 08:44:56 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 08:44:56 Check angles 08:44:56 SkyScan query 08:44:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 08:44:57 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 08:44:57 Check angles 08:44:57 SkyScan query 08:44:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.665<-17311 Statuses=0008 0009 08:44:57 Msec=2250 True Az=112.995 Ze=-79.665 Az status=0008 Ze status=0009 08:44:58 Check angles 08:44:58 SkyScan query 08:44:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 08:44:58 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 08:44:58 Check angles 08:44:58 SkyScan query 08:44:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.74<-14516 Statuses=0008 0009 08:44:59 Msec=3750 True Az=112.995 Ze=-37.74 Az status=0008 Ze status=0009 08:44:59 Check angles 08:44:59 SkyScan query 08:45:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.38<-13092 Statuses=0008 0009 08:45:00 Msec=4500 True Az=112.995 Ze=-16.38 Az status=0008 Ze status=0009 08:45:00 Check angles 08:45:00 SkyScan query 08:45:00 SkyScan query done: ret=0 az=113.01<-7534 ze=4.455<-11703 Statuses=0008 0009 08:45:00 Msec=5250 True Az=113.01 Ze=4.455 Az status=0008 Ze status=0009 08:45:01 Check angles 08:45:01 SkyScan query 08:45:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:45:01 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:45:01 Message to Master queued w/err=0: serial=118271 error=0 08:45:06 Received message from Master: op=Filter serial=118272 08:45:06 Color wheel filter change from 0 to 0 08:45:06 FLIGetFilterPos err=0 currentPosition=0 08:45:06 FLIGetStepsRemaining err=0 RemainingSteps=0 08:45:06 Filter is already there-color wheel unchanged 08:45:06 Received message from Master: op=Shutter serial=118273 08:45:06 Shutter LASER close 08:45:07 Received message from Camera: op=State serial=118275 08:45:07 GetSingleValue result=40 Value=cccccccc 08:45:07 SkyScan query 08:45:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:45:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:07 Parameters OK 08:45:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:07 Set A/D data flow result=40 08:45:07 Set A/D channel type result=40 08:45:07 Set A/D encoding result=40 08:45:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:07 Set channel filter=0.000000e+000 result=40 08:45:07 Config A/D Result=40 08:45:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:07 Get A/D filter: -9.255963e+061 result=40 08:45:07 Get A/D value=-858993460 result=40 08:45:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:07 Parameters OK 08:45:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:07 Set A/D data flow result=40 08:45:07 Set A/D channel type result=40 08:45:07 Set A/D encoding result=40 08:45:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:07 Set channel filter=0.000000e+000 result=40 08:45:07 Config A/D Result=40 08:45:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:07 Get A/D filter: -9.255963e+061 result=40 08:45:07 Get A/D value=-858993460 result=40 08:45:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:45:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:45:07 Aux= 08:45:07 Message to Camera, serial 118275 queued 08:45:44 Received message from Master: op=PointingHead serial=118288 08:45:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:45:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:45:44 Point started: ret=0 08:45:44 point_skyscan result=0 08:45:45 Check angles 08:45:45 SkyScan query 08:45:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:45:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:45:46 Message to Master queued w/err=0: serial=118288 error=0 08:45:51 Received message from Master: op=Filter serial=118289 08:45:51 Color wheel filter change from 0 to 0 08:45:51 FLIGetFilterPos err=0 currentPosition=0 08:45:51 FLIGetStepsRemaining err=0 RemainingSteps=0 08:45:51 Filter is already there-color wheel unchanged 08:45:51 Received message from Master: op=Shutter serial=118290 08:45:51 Shutter LASER close 08:45:51 Received message from Camera: op=State serial=118292 08:45:51 GetSingleValue result=40 Value=cccccccc 08:45:51 SkyScan query 08:45:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:45:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:51 Parameters OK 08:45:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:51 Set A/D data flow result=40 08:45:51 Set A/D channel type result=40 08:45:51 Set A/D encoding result=40 08:45:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:51 Set channel filter=0.000000e+000 result=40 08:45:51 Config A/D Result=40 08:45:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:51 Get A/D filter: -9.255963e+061 result=40 08:45:51 Get A/D value=-858993460 result=40 08:45:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:51 Parameters OK 08:45:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:51 Set A/D data flow result=40 08:45:51 Set A/D channel type result=40 08:45:51 Set A/D encoding result=40 08:45:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:51 Set channel filter=0.000000e+000 result=40 08:45:51 Config A/D Result=40 08:45:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:51 Get A/D filter: -9.255963e+061 result=40 08:45:51 Get A/D value=-858993460 result=40 08:45:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:45:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:45:51 Aux= 08:45:51 Message to Camera, serial 118292 queued 08:46:28 Received message from Master: op=PointingHead serial=118305 08:46:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:46:28 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:46:29 Point started: ret=0 08:46:29 point_skyscan result=0 08:46:29 Check angles 08:46:29 SkyScan query 08:46:30 SkyScan query done: ret=0 az=136.41<-9094 ze=-6.51<-12434 Statuses=0009 0008 08:46:30 Msec=0 True Az=136.41 Ze=-6.51 Az status=0009 Ze status=0008 08:46:30 Check angles 08:46:30 SkyScan query 08:46:31 SkyScan query done: ret=0 az=153.78<-10252 ze=-6.495<-12433 Statuses=0009 0008 08:46:31 Msec=750 True Az=153.78 Ze=-6.495 Az status=0009 Ze status=0008 08:46:31 Check angles 08:46:31 SkyScan query 08:46:31 SkyScan query done: ret=0 az=171.24<-11416 ze=-6.495<-12433 Statuses=0009 0008 08:46:31 Msec=1500 True Az=171.24 Ze=-6.495 Az status=0009 Ze status=0008 08:46:32 Check angles 08:46:32 SkyScan query 08:46:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:46:32 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:46:32 Message to Master queued w/err=0: serial=118305 error=0 08:46:37 Received message from Master: op=Filter serial=118306 08:46:37 Color wheel filter change from 0 to 0 08:46:37 FLIGetFilterPos err=0 currentPosition=0 08:46:37 FLIGetStepsRemaining err=0 RemainingSteps=0 08:46:37 Filter is already there-color wheel unchanged 08:46:37 Received message from Master: op=Shutter serial=118307 08:46:37 Shutter LASER close 08:46:37 Received message from Camera: op=State serial=118309 08:46:37 GetSingleValue result=40 Value=cccccccc 08:46:37 SkyScan query 08:46:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:46:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:38 Parameters OK 08:46:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:38 Set A/D data flow result=40 08:46:38 Set A/D channel type result=40 08:46:38 Set A/D encoding result=40 08:46:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:38 Set channel filter=0.000000e+000 result=40 08:46:38 Config A/D Result=40 08:46:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:38 Get A/D filter: -9.255963e+061 result=40 08:46:38 Get A/D value=-858993460 result=40 08:46:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:38 Parameters OK 08:46:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:38 Set A/D data flow result=40 08:46:38 Set A/D channel type result=40 08:46:38 Set A/D encoding result=40 08:46:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:38 Set channel filter=0.000000e+000 result=40 08:46:38 Config A/D Result=40 08:46:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:38 Get A/D filter: -9.255963e+061 result=40 08:46:38 Get A/D value=-858993460 result=40 08:46:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:46:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:46:38 Aux= 08:46:38 Message to Camera, serial 118309 queued 08:47:15 Received message from Master: op=PointingHead serial=118322 08:47:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:47:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:47:15 Point started: ret=0 08:47:15 point_skyscan result=0 08:47:16 Check angles 08:47:16 SkyScan query 08:47:17 SkyScan query done: ret=0 az=152.55<-10170 ze=6.51<-11566 Statuses=0009 0008 08:47:17 Msec=0 True Az=152.55 Ze=6.51 Az status=0009 Ze status=0008 08:47:17 Check angles 08:47:17 SkyScan query 08:47:17 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 08:47:17 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 08:47:17 Check angles 08:47:17 SkyScan query 08:47:18 SkyScan query done: ret=0 az=117.645<-7843 ze=6.495<-11567 Statuses=0009 0008 08:47:18 Msec=1500 True Az=117.645 Ze=6.495 Az status=0009 Ze status=0008 08:47:18 Check angles 08:47:18 SkyScan query 08:47:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:47:19 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:47:19 Message to Master queued w/err=0: serial=118322 error=0 08:47:24 Received message from Master: op=Filter serial=118323 08:47:24 Color wheel filter change from 0 to 0 08:47:24 FLIGetFilterPos err=0 currentPosition=0 08:47:24 FLIGetStepsRemaining err=0 RemainingSteps=0 08:47:24 Filter is already there-color wheel unchanged 08:47:24 Received message from Master: op=Shutter serial=118324 08:47:24 Shutter LASER close 08:47:24 Received message from Camera: op=State serial=118326 08:47:24 GetSingleValue result=40 Value=cccccccc 08:47:24 SkyScan query 08:47:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:47:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:25 Parameters OK 08:47:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:25 Set A/D data flow result=40 08:47:25 Set A/D channel type result=40 08:47:25 Set A/D encoding result=40 08:47:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:25 Set channel filter=0.000000e+000 result=40 08:47:25 Config A/D Result=40 08:47:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:25 Get A/D filter: -9.255963e+061 result=40 08:47:25 Get A/D value=-858993460 result=40 08:47:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:25 Parameters OK 08:47:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:25 Set A/D data flow result=40 08:47:25 Set A/D channel type result=40 08:47:25 Set A/D encoding result=40 08:47:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:25 Set channel filter=0.000000e+000 result=40 08:47:25 Config A/D Result=40 08:47:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:25 Get A/D filter: -9.255963e+061 result=40 08:47:25 Get A/D value=-858993460 result=40 08:47:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:47:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:47:25 Aux= 08:47:25 Message to Camera, serial 118326 queued 08:48:01 Received message from Master: op=PointingHead serial=118339 08:48:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:48:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:48:02 Point started: ret=0 08:48:02 point_skyscan result=0 08:48:03 Check angles 08:48:03 SkyScan query 08:48:03 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.52<-13568 Statuses=0008 0009 08:48:03 Msec=0 True Az=112.98 Ze=-23.52 Az status=0008 Ze status=0009 08:48:03 Check angles 08:48:03 SkyScan query 08:48:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 08:48:04 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 08:48:04 Check angles 08:48:04 SkyScan query 08:48:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.415<-16361 Statuses=0008 0009 08:48:05 Msec=1500 True Az=112.995 Ze=-65.415 Az status=0008 Ze status=0009 08:48:05 Check angles 08:48:05 SkyScan query 08:48:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.355<-17757 Statuses=0008 0009 08:48:05 Msec=2250 True Az=112.995 Ze=-86.355 Az status=0008 Ze status=0009 08:48:06 Check angles 08:48:06 SkyScan query 08:48:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.31<-19154 Statuses=0008 0009 08:48:06 Msec=3000 True Az=112.995 Ze=-107.31 Az status=0008 Ze status=0009 08:48:06 Check angles 08:48:06 SkyScan query 08:48:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.73<-20582 Statuses=0008 0009 08:48:07 Msec=3750 True Az=112.995 Ze=-128.73 Az status=0008 Ze status=0009 08:48:07 Check angles 08:48:07 SkyScan query 08:48:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 08:48:08 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 08:48:08 Check angles 08:48:08 SkyScan query 08:48:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.625<-23375 Statuses=0008 0009 08:48:08 Msec=5250 True Az=112.995 Ze=-170.625 Az status=0008 Ze status=0009 08:48:09 Check angles 08:48:09 SkyScan query 08:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:48:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:48:09 Message to Master queued w/err=0: serial=118339 error=0 08:48:14 Received message from Master: op=Filter serial=118340 08:48:14 Color wheel filter change from 0 to 0 08:48:14 FLIGetFilterPos err=0 currentPosition=0 08:48:14 FLIGetStepsRemaining err=0 RemainingSteps=0 08:48:14 Filter is already there-color wheel unchanged 08:48:14 Received message from Master: op=Shutter serial=118341 08:48:14 Shutter LASER open 08:48:14 Received message from Camera: op=State serial=118343 08:48:14 GetSingleValue result=40 Value=cccccccc 08:48:14 SkyScan query 08:48:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:48:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:15 Parameters OK 08:48:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:15 Set A/D data flow result=40 08:48:15 Set A/D channel type result=40 08:48:15 Set A/D encoding result=40 08:48:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:15 Set channel filter=0.000000e+000 result=40 08:48:15 Config A/D Result=40 08:48:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:15 Get A/D filter: -9.255963e+061 result=40 08:48:15 Get A/D value=-858993460 result=40 08:48:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:15 Parameters OK 08:48:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:15 Set A/D data flow result=40 08:48:15 Set A/D channel type result=40 08:48:15 Set A/D encoding result=40 08:48:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:15 Set channel filter=0.000000e+000 result=40 08:48:15 Config A/D Result=40 08:48:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:15 Get A/D filter: -9.255963e+061 result=40 08:48:15 Get A/D value=-858993460 result=40 08:48:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:48:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:48:15 Aux= 08:48:15 Message to Camera, serial 118343 queued 08:48:23 Received message from Master: op=Shutter serial=118353 08:48:23 Shutter LASER close 08:48:24 Received message from Master: op=PointingHead serial=118357 08:48:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:48:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:48:24 Point started: ret=0 08:48:24 point_skyscan result=0 08:48:25 Check angles 08:48:25 SkyScan query 08:48:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.785<-21519 Statuses=0008 0009 08:48:26 Msec=0 True Az=112.995 Ze=-142.785 Az status=0008 Ze status=0009 08:48:26 Check angles 08:48:26 SkyScan query 08:48:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.8<-20120 Statuses=0008 0009 08:48:26 Msec=750 True Az=112.995 Ze=-121.8 Az status=0008 Ze status=0009 08:48:27 Check angles 08:48:27 SkyScan query 08:48:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.875<-18725 Statuses=0008 0009 08:48:27 Msec=1500 True Az=112.995 Ze=-100.875 Az status=0008 Ze status=0009 08:48:27 Check angles 08:48:27 SkyScan query 08:48:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.905<-17327 Statuses=0008 0009 08:48:28 Msec=2250 True Az=112.995 Ze=-79.905 Az status=0008 Ze status=0009 08:48:28 Check angles 08:48:28 SkyScan query 08:48:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.965<-15931 Statuses=0008 0009 08:48:29 Msec=3000 True Az=112.995 Ze=-58.965 Az status=0008 Ze status=0009 08:48:29 Check angles 08:48:29 SkyScan query 08:48:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.95<-14530 Statuses=0008 0009 08:48:29 Msec=3750 True Az=112.995 Ze=-37.95 Az status=0008 Ze status=0009 08:48:30 Check angles 08:48:30 SkyScan query 08:48:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.025<-13135 Statuses=0008 0009 08:48:30 Msec=4500 True Az=112.995 Ze=-17.025 Az status=0008 Ze status=0009 08:48:30 Check angles 08:48:30 SkyScan query 08:48:31 SkyScan query done: ret=0 az=112.995<-7533 ze=3.96<-11736 Statuses=0008 0009 08:48:31 Msec=5250 True Az=112.995 Ze=3.96 Az status=0008 Ze status=0009 08:48:31 Check angles 08:48:31 SkyScan query 08:48:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:48:32 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:48:32 Message to Master queued w/err=0: serial=118357 error=0 08:48:37 Received message from Master: op=Filter serial=118358 08:48:37 Color wheel filter change from 0 to 0 08:48:37 FLIGetFilterPos err=0 currentPosition=0 08:48:37 FLIGetStepsRemaining err=0 RemainingSteps=0 08:48:37 Filter is already there-color wheel unchanged 08:48:37 Received message from Master: op=Shutter serial=118359 08:48:37 Shutter LASER close 08:48:37 Received message from Camera: op=State serial=118361 08:48:37 GetSingleValue result=40 Value=cccccccc 08:48:37 SkyScan query 08:48:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:48:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:38 Parameters OK 08:48:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:38 Set A/D data flow result=40 08:48:38 Set A/D channel type result=40 08:48:38 Set A/D encoding result=40 08:48:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:38 Set channel filter=0.000000e+000 result=40 08:48:38 Config A/D Result=40 08:48:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:38 Get A/D filter: -9.255963e+061 result=40 08:48:38 Get A/D value=-858993460 result=40 08:48:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:38 Parameters OK 08:48:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:38 Set A/D data flow result=40 08:48:38 Set A/D channel type result=40 08:48:38 Set A/D encoding result=40 08:48:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:38 Set channel filter=0.000000e+000 result=40 08:48:38 Config A/D Result=40 08:48:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:38 Get A/D filter: -9.255963e+061 result=40 08:48:38 Get A/D value=-858993460 result=40 08:48:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:48:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:48:38 Aux= 08:48:38 Message to Camera, serial 118361 queued 08:49:14 Received message from Master: op=PointingHead serial=118374 08:49:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:49:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:49:15 Point started: ret=0 08:49:15 point_skyscan result=0 08:49:15 Check angles 08:49:15 SkyScan query 08:49:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:49:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:49:16 Message to Master queued w/err=0: serial=118374 error=0 08:49:21 Received message from Master: op=Filter serial=118375 08:49:21 Color wheel filter change from 0 to 0 08:49:21 FLIGetFilterPos err=0 currentPosition=0 08:49:21 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:21 Filter is already there-color wheel unchanged 08:49:21 Received message from Master: op=Shutter serial=118376 08:49:21 Shutter LASER close 08:49:21 Received message from Camera: op=State serial=118378 08:49:21 GetSingleValue result=40 Value=cccccccc 08:49:21 SkyScan query 08:49:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:49:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:22 Parameters OK 08:49:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:22 Set A/D data flow result=40 08:49:22 Set A/D channel type result=40 08:49:22 Set A/D encoding result=40 08:49:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:22 Set channel filter=0.000000e+000 result=40 08:49:22 Config A/D Result=40 08:49:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:22 Get A/D filter: -9.255963e+061 result=40 08:49:22 Get A/D value=-858993460 result=40 08:49:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:22 Parameters OK 08:49:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:22 Set A/D data flow result=40 08:49:22 Set A/D channel type result=40 08:49:22 Set A/D encoding result=40 08:49:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:22 Set channel filter=0.000000e+000 result=40 08:49:22 Config A/D Result=40 08:49:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:22 Get A/D filter: -9.255963e+061 result=40 08:49:22 Get A/D value=-858993460 result=40 08:49:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:22 Aux= 08:49:22 Message to Camera, serial 118378 queued 08:49:59 Received message from Master: op=PointingHead serial=118391 08:49:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:49:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:49:59 Point started: ret=0 08:49:59 point_skyscan result=0 08:50:00 Check angles 08:50:00 SkyScan query 08:50:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:50:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:50:00 Message to Master queued w/err=0: serial=118391 error=0 08:50:05 Received message from Master: op=Filter serial=118392 08:50:05 Color wheel filter change from 0 to 0 08:50:05 FLIGetFilterPos err=0 currentPosition=0 08:50:05 FLIGetStepsRemaining err=0 RemainingSteps=0 08:50:05 Filter is already there-color wheel unchanged 08:50:06 Received message from Master: op=Shutter serial=118393 08:50:06 Shutter LASER close 08:50:06 Received message from Camera: op=State serial=118395 08:50:06 GetSingleValue result=40 Value=cccccccc 08:50:06 SkyScan query 08:50:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:50:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:06 Parameters OK 08:50:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:06 Set A/D data flow result=40 08:50:06 Set A/D channel type result=40 08:50:06 Set A/D encoding result=40 08:50:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:06 Set channel filter=0.000000e+000 result=40 08:50:06 Config A/D Result=40 08:50:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:06 Get A/D filter: -9.255963e+061 result=40 08:50:06 Get A/D value=-858993460 result=40 08:50:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:06 Parameters OK 08:50:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:06 Set A/D data flow result=40 08:50:06 Set A/D channel type result=40 08:50:06 Set A/D encoding result=40 08:50:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:06 Set channel filter=0.000000e+000 result=40 08:50:06 Config A/D Result=40 08:50:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:06 Get A/D filter: -9.255963e+061 result=40 08:50:06 Get A/D value=-858993460 result=40 08:50:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:50:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:50:06 Aux= 08:50:06 Message to Camera, serial 118395 queued 08:50:43 Received message from Master: op=PointingHead serial=118408 08:50:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:50:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:50:43 Point started: ret=0 08:50:43 point_skyscan result=0 08:50:44 Check angles 08:50:44 SkyScan query 08:50:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:50:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:50:45 Message to Master queued w/err=0: serial=118408 error=0 08:50:50 Received message from Master: op=Filter serial=118409 08:50:50 Color wheel filter change from 0 to 0 08:50:50 FLIGetFilterPos err=0 currentPosition=0 08:50:50 FLIGetStepsRemaining err=0 RemainingSteps=0 08:50:50 Filter is already there-color wheel unchanged 08:50:50 Received message from Master: op=Shutter serial=118410 08:50:50 Shutter LASER close 08:50:50 Received message from Camera: op=State serial=118412 08:50:50 GetSingleValue result=40 Value=cccccccc 08:50:50 SkyScan query 08:50:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:50:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:50 Parameters OK 08:50:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:50 Set A/D data flow result=40 08:50:50 Set A/D channel type result=40 08:50:50 Set A/D encoding result=40 08:50:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:50 Set channel filter=0.000000e+000 result=40 08:50:50 Config A/D Result=40 08:50:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:50 Get A/D filter: -9.255963e+061 result=40 08:50:50 Get A/D value=-858993460 result=40 08:50:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:50 Parameters OK 08:50:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:50 Set A/D data flow result=40 08:50:50 Set A/D channel type result=40 08:50:50 Set A/D encoding result=40 08:50:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:50 Set channel filter=0.000000e+000 result=40 08:50:50 Config A/D Result=40 08:50:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:50 Get A/D filter: -9.255963e+061 result=40 08:50:50 Get A/D value=-858993460 result=40 08:50:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:50:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:50:50 Aux= 08:50:50 Message to Camera, serial 118412 queued 08:51:27 Received message from Master: op=PointingHead serial=118425 08:51:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:51:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:51:28 Point started: ret=0 08:51:28 point_skyscan result=0 08:51:28 Check angles 08:51:28 SkyScan query 08:51:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.565<-13571 Statuses=0008 0009 08:51:29 Msec=0 True Az=112.995 Ze=-23.565 Az status=0008 Ze status=0009 08:51:29 Check angles 08:51:29 SkyScan query 08:51:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.52<-14968 Statuses=0008 0009 08:51:30 Msec=750 True Az=112.995 Ze=-44.52 Az status=0008 Ze status=0009 08:51:30 Check angles 08:51:30 SkyScan query 08:51:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.895<-16393 Statuses=0008 0009 08:51:31 Msec=1500 True Az=112.995 Ze=-65.895 Az status=0008 Ze status=0009 08:51:31 Check angles 08:51:31 SkyScan query 08:51:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.865<-17791 Statuses=0008 0009 08:51:31 Msec=2250 True Az=112.995 Ze=-86.865 Az status=0008 Ze status=0009 08:51:31 Check angles 08:51:31 SkyScan query 08:51:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 08:51:32 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 08:51:32 Check angles 08:51:32 SkyScan query 08:51:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.225<-20615 Statuses=0008 0009 08:51:33 Msec=3750 True Az=112.995 Ze=-129.225 Az status=0008 Ze status=0009 08:51:33 Check angles 08:51:33 SkyScan query 08:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.18<-22012 Statuses=0008 0009 08:51:34 Msec=4500 True Az=112.995 Ze=-150.18 Az status=0008 Ze status=0009 08:51:34 Check angles 08:51:34 SkyScan query 08:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-171<-23400 Statuses=0008 0009 08:51:34 Msec=5250 True Az=112.995 Ze=-171 Az status=0008 Ze status=0009 08:51:34 Check angles 08:51:34 SkyScan query 08:51:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:51:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:51:35 Message to Master queued w/err=0: serial=118425 error=0 08:51:40 Received message from Master: op=Filter serial=118426 08:51:40 Color wheel filter change from 0 to 0 08:51:40 FLIGetFilterPos err=0 currentPosition=0 08:51:40 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:40 Filter is already there-color wheel unchanged 08:51:40 Received message from Master: op=Shutter serial=118427 08:51:40 Shutter LASER open 08:51:40 Received message from Camera: op=State serial=118429 08:51:40 GetSingleValue result=40 Value=cccccccc 08:51:40 SkyScan query 08:51:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:51:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:41 Parameters OK 08:51:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:41 Set A/D data flow result=40 08:51:41 Set A/D channel type result=40 08:51:41 Set A/D encoding result=40 08:51:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:41 Set channel filter=0.000000e+000 result=40 08:51:41 Config A/D Result=40 08:51:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:41 Get A/D filter: -9.255963e+061 result=40 08:51:41 Get A/D value=-858993460 result=40 08:51:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:41 Parameters OK 08:51:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:41 Set A/D data flow result=40 08:51:41 Set A/D channel type result=40 08:51:41 Set A/D encoding result=40 08:51:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:41 Set channel filter=0.000000e+000 result=40 08:51:41 Config A/D Result=40 08:51:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:41 Get A/D filter: -9.255963e+061 result=40 08:51:41 Get A/D value=-858993460 result=40 08:51:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:41 Aux= 08:51:41 Message to Camera, serial 118429 queued 08:51:49 Received message from Master: op=Shutter serial=118439 08:51:49 Shutter LASER close 08:51:50 Received message from Master: op=PointingHead serial=118443 08:51:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:51:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:51:50 Point started: ret=0 08:51:50 point_skyscan result=0 08:51:51 Check angles 08:51:51 SkyScan query 08:51:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 08:51:52 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 08:51:52 Check angles 08:51:52 SkyScan query 08:51:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.62<-20108 Statuses=0008 0009 08:51:52 Msec=750 True Az=112.995 Ze=-121.62 Az status=0008 Ze status=0009 08:51:53 Check angles 08:51:53 SkyScan query 08:51:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.68<-18712 Statuses=0008 0009 08:51:53 Msec=1500 True Az=112.995 Ze=-100.68 Az status=0008 Ze status=0009 08:51:53 Check angles 08:51:53 SkyScan query 08:51:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.695<-17313 Statuses=0008 0009 08:51:54 Msec=2250 True Az=112.995 Ze=-79.695 Az status=0008 Ze status=0009 08:51:54 Check angles 08:51:54 SkyScan query 08:51:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.29<-15886 Statuses=0008 0009 08:51:55 Msec=3000 True Az=112.995 Ze=-58.29 Az status=0008 Ze status=0009 08:51:55 Check angles 08:51:55 SkyScan query 08:51:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.395<-14493 Statuses=0008 0009 08:51:55 Msec=3750 True Az=112.995 Ze=-37.395 Az status=0008 Ze status=0009 08:51:56 Check angles 08:51:56 SkyScan query 08:51:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.41<-13094 Statuses=0008 0009 08:51:56 Msec=4500 True Az=112.995 Ze=-16.41 Az status=0008 Ze status=0009 08:51:56 Check angles 08:51:56 SkyScan query 08:51:57 SkyScan query done: ret=0 az=113.01<-7534 ze=4.44<-11704 Statuses=0008 0009 08:51:57 Msec=5250 True Az=113.01 Ze=4.44 Az status=0008 Ze status=0009 08:51:57 Check angles 08:51:57 SkyScan query 08:51:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:51:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:51:58 Message to Master queued w/err=0: serial=118443 error=0 08:52:03 Received message from Master: op=Filter serial=118444 08:52:03 Color wheel filter change from 0 to 0 08:52:03 FLIGetFilterPos err=0 currentPosition=0 08:52:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:52:03 Filter is already there-color wheel unchanged 08:52:03 Received message from Master: op=Shutter serial=118445 08:52:03 Shutter LASER close 08:52:03 Received message from Camera: op=State serial=118447 08:52:03 GetSingleValue result=40 Value=cccccccc 08:52:03 SkyScan query 08:52:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:52:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:04 Parameters OK 08:52:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:04 Set A/D data flow result=40 08:52:04 Set A/D channel type result=40 08:52:04 Set A/D encoding result=40 08:52:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:04 Set channel filter=0.000000e+000 result=40 08:52:04 Config A/D Result=40 08:52:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:04 Get A/D filter: -9.255963e+061 result=40 08:52:04 Get A/D value=-858993460 result=40 08:52:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:04 Parameters OK 08:52:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:04 Set A/D data flow result=40 08:52:04 Set A/D channel type result=40 08:52:04 Set A/D encoding result=40 08:52:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:04 Set channel filter=0.000000e+000 result=40 08:52:04 Config A/D Result=40 08:52:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:04 Get A/D filter: -9.255963e+061 result=40 08:52:04 Get A/D value=-858993460 result=40 08:52:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:52:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:52:04 Aux= 08:52:04 Message to Camera, serial 118447 queued 08:52:40 Received message from Master: op=PointingHead serial=118460 08:52:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:52:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:52:41 Point started: ret=0 08:52:41 point_skyscan result=0 08:52:42 Check angles 08:52:42 SkyScan query 08:52:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:52:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:52:42 Message to Master queued w/err=0: serial=118460 error=0 08:52:47 Received message from Master: op=Filter serial=118461 08:52:47 Color wheel filter change from 0 to 0 08:52:47 FLIGetFilterPos err=0 currentPosition=0 08:52:47 FLIGetStepsRemaining err=0 RemainingSteps=0 08:52:47 Filter is already there-color wheel unchanged 08:52:47 Received message from Master: op=Shutter serial=118462 08:52:47 Shutter LASER close 08:52:47 Received message from Camera: op=State serial=118464 08:52:47 GetSingleValue result=40 Value=cccccccc 08:52:47 SkyScan query 08:52:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:52:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:48 Parameters OK 08:52:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:48 Set A/D data flow result=40 08:52:48 Set A/D channel type result=40 08:52:48 Set A/D encoding result=40 08:52:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:48 Set channel filter=0.000000e+000 result=40 08:52:48 Config A/D Result=40 08:52:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:48 Get A/D filter: -9.255963e+061 result=40 08:52:48 Get A/D value=-858993460 result=40 08:52:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:48 Parameters OK 08:52:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:48 Set A/D data flow result=40 08:52:48 Set A/D channel type result=40 08:52:48 Set A/D encoding result=40 08:52:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:48 Set channel filter=0.000000e+000 result=40 08:52:48 Config A/D Result=40 08:52:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:48 Get A/D filter: -9.255963e+061 result=40 08:52:48 Get A/D value=-858993460 result=40 08:52:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:52:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:52:48 Aux= 08:52:48 Message to Camera, serial 118464 queued 08:53:25 Received message from Master: op=PointingHead serial=118477 08:53:25 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:53:25 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:53:25 Point started: ret=0 08:53:25 point_skyscan result=0 08:53:26 Check angles 08:53:26 SkyScan query 08:53:26 SkyScan query done: ret=0 az=135.72<-9048 ze=-6.51<-12434 Statuses=0009 0008 08:53:26 Msec=0 True Az=135.72 Ze=-6.51 Az status=0009 Ze status=0008 08:53:27 Check angles 08:53:27 SkyScan query 08:53:27 SkyScan query done: ret=0 az=153.54<-10236 ze=-6.495<-12433 Statuses=0009 0008 08:53:27 Msec=750 True Az=153.54 Ze=-6.495 Az status=0009 Ze status=0008 08:53:27 Check angles 08:53:27 SkyScan query 08:53:28 SkyScan query done: ret=0 az=171<-11400 ze=-6.495<-12433 Statuses=0009 0008 08:53:28 Msec=1500 True Az=171 Ze=-6.495 Az status=0009 Ze status=0008 08:53:28 Check angles 08:53:28 SkyScan query 08:53:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:53:29 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:53:29 Message to Master queued w/err=0: serial=118477 error=0 08:53:34 Received message from Master: op=Filter serial=118478 08:53:34 Color wheel filter change from 0 to 0 08:53:34 FLIGetFilterPos err=0 currentPosition=0 08:53:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:53:34 Filter is already there-color wheel unchanged 08:53:34 Received message from Master: op=Shutter serial=118479 08:53:34 Shutter LASER close 08:53:34 Received message from Camera: op=State serial=118481 08:53:34 GetSingleValue result=40 Value=cccccccc 08:53:34 SkyScan query 08:53:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:53:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:34 Parameters OK 08:53:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:34 Set A/D data flow result=40 08:53:34 Set A/D channel type result=40 08:53:34 Set A/D encoding result=40 08:53:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:34 Set channel filter=0.000000e+000 result=40 08:53:34 Config A/D Result=40 08:53:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:34 Get A/D filter: -9.255963e+061 result=40 08:53:34 Get A/D value=-858993460 result=40 08:53:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:34 Parameters OK 08:53:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:34 Set A/D data flow result=40 08:53:34 Set A/D channel type result=40 08:53:34 Set A/D encoding result=40 08:53:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:34 Set channel filter=0.000000e+000 result=40 08:53:34 Config A/D Result=40 08:53:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:34 Get A/D filter: -9.255963e+061 result=40 08:53:34 Get A/D value=-858993460 result=40 08:53:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:53:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:53:34 Aux= 08:53:34 Message to Camera, serial 118481 queued 08:54:11 Received message from Master: op=PointingHead serial=118494 08:54:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:54:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:54:12 Point started: ret=0 08:54:12 point_skyscan result=0 08:54:12 Check angles 08:54:12 SkyScan query 08:54:13 SkyScan query done: ret=0 az=152.385<-10159 ze=6.51<-11566 Statuses=0009 0008 08:54:13 Msec=0 True Az=152.385 Ze=6.51 Az status=0009 Ze status=0008 08:54:13 Check angles [UTC 2019-3-5 08:54:13] 08:54:13 SkyScan query 08:54:14 SkyScan query done: ret=0 az=133.095<-8873 ze=6.495<-11567 Statuses=0009 0008 08:54:14 Msec=750 True Az=133.095 Ze=6.495 Az status=0009 Ze status=0008 08:54:14 Check angles 08:54:14 SkyScan query 08:54:14 SkyScan query done: ret=0 az=117.045<-7803 ze=6.495<-11567 Statuses=0009 0008 08:54:14 Msec=1500 True Az=117.045 Ze=6.495 Az status=0009 Ze status=0008 08:54:15 Check angles 08:54:15 SkyScan query 08:54:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:54:15 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:54:15 Message to Master queued w/err=0: serial=118494 error=0 08:54:20 Received message from Master: op=Filter serial=118495 08:54:20 Color wheel filter change from 0 to 0 08:54:20 FLIGetFilterPos err=0 currentPosition=0 08:54:20 FLIGetStepsRemaining err=0 RemainingSteps=0 08:54:20 Filter is already there-color wheel unchanged 08:54:20 Received message from Master: op=Shutter serial=118496 08:54:20 Shutter LASER close 08:54:21 Received message from Camera: op=State serial=118498 08:54:21 GetSingleValue result=40 Value=cccccccc 08:54:21 SkyScan query 08:54:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:54:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:21 Parameters OK 08:54:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:21 Set A/D data flow result=40 08:54:21 Set A/D channel type result=40 08:54:21 Set A/D encoding result=40 08:54:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:21 Set channel filter=0.000000e+000 result=40 08:54:21 Config A/D Result=40 08:54:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:21 Get A/D filter: -9.255963e+061 result=40 08:54:21 Get A/D value=-858993460 result=40 08:54:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:21 Parameters OK 08:54:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:21 Set A/D data flow result=40 08:54:21 Set A/D channel type result=40 08:54:21 Set A/D encoding result=40 08:54:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:21 Set channel filter=0.000000e+000 result=40 08:54:21 Config A/D Result=40 08:54:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:21 Get A/D filter: -9.255963e+061 result=40 08:54:21 Get A/D value=-858993460 result=40 08:54:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:54:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:54:21 Aux= 08:54:21 Message to Camera, serial 118498 queued 08:54:57 Received message from Master: op=PointingHead serial=118510 08:54:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:54:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:54:57 Point started: ret=0 08:54:57 point_skyscan result=0 08:54:58 Check angles 08:54:58 SkyScan query 08:54:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 08:54:59 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 08:54:59 Check angles 08:54:59 SkyScan query 08:54:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.64<-14976 Statuses=0008 0009 08:54:59 Msec=750 True Az=112.995 Ze=-44.64 Az status=0008 Ze status=0009 08:55:00 Check angles 08:55:00 SkyScan query 08:55:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.58<-16372 Statuses=0008 0009 08:55:00 Msec=1500 True Az=112.995 Ze=-65.58 Az status=0008 Ze status=0009 08:55:00 Check angles 08:55:00 SkyScan query 08:55:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-87<-17800 Statuses=0008 0009 08:55:01 Msec=2250 True Az=112.995 Ze=-87 Az status=0008 Ze status=0009 08:55:01 Check angles 08:55:01 SkyScan query 08:55:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.42<-19228 Statuses=0008 0009 08:55:02 Msec=3000 True Az=112.995 Ze=-108.42 Az status=0008 Ze status=0009 08:55:02 Check angles 08:55:02 SkyScan query 08:55:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.78<-20652 Statuses=0008 0009 08:55:02 Msec=3750 True Az=112.995 Ze=-129.78 Az status=0008 Ze status=0009 08:55:03 Check angles 08:55:03 SkyScan query 08:55:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.69<-22046 Statuses=0008 0009 08:55:03 Msec=4500 True Az=112.995 Ze=-150.69 Az status=0008 Ze status=0009 08:55:03 Check angles 08:55:03 SkyScan query 08:55:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.405<-23427 Statuses=0008 0009 08:55:04 Msec=5250 True Az=112.995 Ze=-171.405 Az status=0008 Ze status=0009 08:55:04 Check angles 08:55:04 SkyScan query 08:55:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:55:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:55:05 Message to Master queued w/err=0: serial=118510 error=0 08:55:10 Received message from Master: op=Filter serial=118511 08:55:10 Color wheel filter change from 0 to 0 08:55:10 FLIGetFilterPos err=0 currentPosition=0 08:55:10 FLIGetStepsRemaining err=0 RemainingSteps=0 08:55:10 Filter is already there-color wheel unchanged 08:55:10 Received message from Master: op=Shutter serial=118512 08:55:10 Shutter LASER open 08:55:10 Received message from Camera: op=State serial=118514 08:55:10 GetSingleValue result=40 Value=cccccccc 08:55:10 SkyScan query 08:55:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:55:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:11 Parameters OK 08:55:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:11 Set A/D data flow result=40 08:55:11 Set A/D channel type result=40 08:55:11 Set A/D encoding result=40 08:55:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:11 Set channel filter=0.000000e+000 result=40 08:55:11 Config A/D Result=40 08:55:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:11 Get A/D filter: -9.255963e+061 result=40 08:55:11 Get A/D value=-858993460 result=40 08:55:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:11 Parameters OK 08:55:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:11 Set A/D data flow result=40 08:55:11 Set A/D channel type result=40 08:55:11 Set A/D encoding result=40 08:55:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:11 Set channel filter=0.000000e+000 result=40 08:55:11 Config A/D Result=40 08:55:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:11 Get A/D filter: -9.255963e+061 result=40 08:55:11 Get A/D value=-858993460 result=40 08:55:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:55:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:55:11 Aux= 08:55:11 Message to Camera, serial 118514 queued 08:55:19 Received message from Master: op=Shutter serial=118524 08:55:19 Shutter LASER close 08:55:19 Received message from Master: op=PointingHead serial=118528 08:55:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:55:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:55:20 Point started: ret=0 08:55:20 point_skyscan result=0 08:55:21 Check angles 08:55:21 SkyScan query 08:55:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 08:55:21 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 08:55:21 Check angles 08:55:21 SkyScan query 08:55:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.74<-20116 Statuses=0008 0009 08:55:22 Msec=750 True Az=112.995 Ze=-121.74 Az status=0008 Ze status=0009 08:55:22 Check angles 08:55:22 SkyScan query 08:55:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.335<-18689 Statuses=0008 0009 08:55:23 Msec=1500 True Az=112.995 Ze=-100.335 Az status=0008 Ze status=0009 08:55:23 Check angles 08:55:23 SkyScan query 08:55:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.365<-17291 Statuses=0008 0009 08:55:23 Msec=2250 True Az=112.995 Ze=-79.365 Az status=0008 Ze status=0009 08:55:24 Check angles 08:55:24 SkyScan query 08:55:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.41<-15894 Statuses=0008 0009 08:55:24 Msec=3000 True Az=112.995 Ze=-58.41 Az status=0008 Ze status=0009 08:55:24 Check angles 08:55:24 SkyScan query 08:55:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.11<-14474 Statuses=0008 0009 08:55:25 Msec=3750 True Az=112.995 Ze=-37.11 Az status=0008 Ze status=0009 08:55:25 Check angles 08:55:25 SkyScan query 08:55:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.125<-13075 Statuses=0008 0009 08:55:26 Msec=4500 True Az=112.995 Ze=-16.125 Az status=0008 Ze status=0009 08:55:26 Check angles 08:55:26 SkyScan query 08:55:26 SkyScan query done: ret=0 az=112.995<-7533 ze=4.65<-11690 Statuses=0008 0009 08:55:26 Msec=5250 True Az=112.995 Ze=4.65 Az status=0008 Ze status=0009 08:55:27 Check angles 08:55:27 SkyScan query 08:55:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:55:27 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:55:27 Message to Master queued w/err=0: serial=118528 error=0 08:55:32 Received message from Master: op=Filter serial=118529 08:55:32 Color wheel filter change from 0 to 0 08:55:32 FLIGetFilterPos err=0 currentPosition=0 08:55:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:55:32 Filter is already there-color wheel unchanged 08:55:32 Received message from Master: op=Shutter serial=118530 08:55:32 Shutter LASER close 08:55:33 Received message from Camera: op=State serial=118532 08:55:33 GetSingleValue result=40 Value=cccccccc 08:55:33 SkyScan query 08:55:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:55:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:33 Parameters OK 08:55:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:33 Set A/D data flow result=40 08:55:33 Set A/D channel type result=40 08:55:33 Set A/D encoding result=40 08:55:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:33 Set channel filter=0.000000e+000 result=40 08:55:33 Config A/D Result=40 08:55:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:33 Get A/D filter: -9.255963e+061 result=40 08:55:33 Get A/D value=-858993460 result=40 08:55:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:33 Parameters OK 08:55:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:33 Set A/D data flow result=40 08:55:33 Set A/D channel type result=40 08:55:33 Set A/D encoding result=40 08:55:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:33 Set channel filter=0.000000e+000 result=40 08:55:33 Config A/D Result=40 08:55:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:33 Get A/D filter: -9.255963e+061 result=40 08:55:33 Get A/D value=-858993460 result=40 08:55:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:55:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:55:33 Aux= 08:55:33 Message to Camera, serial 118532 queued 08:56:09 Received message from Master: op=PointingHead serial=118544 08:56:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:56:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:56:09 Point started: ret=0 08:56:09 point_skyscan result=0 08:56:10 Check angles 08:56:10 SkyScan query 08:56:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:56:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:56:11 Message to Master queued w/err=0: serial=118544 error=0 08:56:16 Received message from Master: op=Filter serial=118545 08:56:16 Color wheel filter change from 0 to 0 08:56:16 FLIGetFilterPos err=0 currentPosition=0 08:56:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:56:16 Filter is already there-color wheel unchanged 08:56:16 Received message from Master: op=Shutter serial=118546 08:56:16 Shutter LASER close 08:56:16 Received message from Camera: op=State serial=118548 08:56:16 GetSingleValue result=40 Value=cccccccc 08:56:16 SkyScan query 08:56:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:56:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:16 Parameters OK 08:56:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:16 Set A/D data flow result=40 08:56:16 Set A/D channel type result=40 08:56:16 Set A/D encoding result=40 08:56:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:16 Set channel filter=0.000000e+000 result=40 08:56:16 Config A/D Result=40 08:56:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:16 Get A/D filter: -9.255963e+061 result=40 08:56:16 Get A/D value=-858993460 result=40 08:56:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:16 Parameters OK 08:56:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:16 Set A/D data flow result=40 08:56:16 Set A/D channel type result=40 08:56:16 Set A/D encoding result=40 08:56:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:16 Set channel filter=0.000000e+000 result=40 08:56:16 Config A/D Result=40 08:56:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:16 Get A/D filter: -9.255963e+061 result=40 08:56:16 Get A/D value=-858993460 result=40 08:56:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:56:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:56:16 Aux= 08:56:16 Message to Camera, serial 118548 queued 08:56:53 Received message from Master: op=PointingHead serial=118561 08:56:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:56:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:56:54 Point started: ret=0 08:56:54 point_skyscan result=0 08:56:54 Check angles 08:56:54 SkyScan query 08:56:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:56:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:56:55 Message to Master queued w/err=0: serial=118561 error=0 08:57:00 Received message from Master: op=Filter serial=118562 08:57:00 Color wheel filter change from 0 to 0 08:57:00 FLIGetFilterPos err=0 currentPosition=0 08:57:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:00 Filter is already there-color wheel unchanged 08:57:00 Received message from Master: op=Shutter serial=118563 08:57:00 Shutter LASER close 08:57:00 Received message from Camera: op=State serial=118565 08:57:00 GetSingleValue result=40 Value=cccccccc 08:57:00 SkyScan query 08:57:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:57:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:01 Parameters OK 08:57:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:01 Set A/D data flow result=40 08:57:01 Set A/D channel type result=40 08:57:01 Set A/D encoding result=40 08:57:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:01 Set channel filter=0.000000e+000 result=40 08:57:01 Config A/D Result=40 08:57:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:01 Get A/D filter: -9.255963e+061 result=40 08:57:01 Get A/D value=-858993460 result=40 08:57:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:01 Parameters OK 08:57:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:01 Set A/D data flow result=40 08:57:01 Set A/D channel type result=40 08:57:01 Set A/D encoding result=40 08:57:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:01 Set channel filter=0.000000e+000 result=40 08:57:01 Config A/D Result=40 08:57:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:01 Get A/D filter: -9.255963e+061 result=40 08:57:01 Get A/D value=-858993460 result=40 08:57:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:01 Aux= 08:57:01 Message to Camera, serial 118565 queued 08:57:38 Received message from Master: op=PointingHead serial=118578 08:57:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:57:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:57:38 Point started: ret=0 08:57:38 point_skyscan result=0 08:57:39 Check angles 08:57:39 SkyScan query 08:57:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:57:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:57:39 Message to Master queued w/err=0: serial=118578 error=0 08:57:44 Received message from Master: op=Filter serial=118579 08:57:44 Color wheel filter change from 0 to 0 08:57:44 FLIGetFilterPos err=0 currentPosition=0 08:57:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:44 Filter is already there-color wheel unchanged 08:57:44 Received message from Master: op=Shutter serial=118580 08:57:44 Shutter LASER close 08:57:45 Received message from Camera: op=State serial=118582 08:57:45 GetSingleValue result=40 Value=cccccccc 08:57:45 SkyScan query 08:57:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:57:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:45 Parameters OK 08:57:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:45 Set A/D data flow result=40 08:57:45 Set A/D channel type result=40 08:57:45 Set A/D encoding result=40 08:57:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:45 Set channel filter=0.000000e+000 result=40 08:57:45 Config A/D Result=40 08:57:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:45 Get A/D filter: -9.255963e+061 result=40 08:57:45 Get A/D value=-858993460 result=40 08:57:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:45 Parameters OK 08:57:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:45 Set A/D data flow result=40 08:57:45 Set A/D channel type result=40 08:57:45 Set A/D encoding result=40 08:57:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:45 Set channel filter=0.000000e+000 result=40 08:57:45 Config A/D Result=40 08:57:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:45 Get A/D filter: -9.255963e+061 result=40 08:57:45 Get A/D value=-858993460 result=40 08:57:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:45 Aux= 08:57:45 Message to Camera, serial 118582 queued 08:58:22 Received message from Master: op=PointingHead serial=118595 08:58:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:58:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:58:22 Point started: ret=0 08:58:22 point_skyscan result=0 08:58:23 Check angles 08:58:23 SkyScan query 08:58:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.535<-13569 Statuses=0008 0009 08:58:24 Msec=0 True Az=112.995 Ze=-23.535 Az status=0008 Ze status=0009 08:58:24 Check angles 08:58:24 SkyScan query 08:58:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.91<-14994 Statuses=0008 0009 08:58:24 Msec=750 True Az=112.995 Ze=-44.91 Az status=0008 Ze status=0009 08:58:25 Check angles 08:58:25 SkyScan query 08:58:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.865<-16391 Statuses=0008 0009 08:58:25 Msec=1500 True Az=112.995 Ze=-65.865 Az status=0008 Ze status=0009 08:58:25 Check angles 08:58:25 SkyScan query 08:58:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.835<-17789 Statuses=0008 0009 08:58:26 Msec=2250 True Az=112.995 Ze=-86.835 Az status=0008 Ze status=0009 08:58:26 Check angles 08:58:26 SkyScan query 08:58:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 08:58:27 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 08:58:27 Check angles 08:58:27 SkyScan query 08:58:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.745<-20583 Statuses=0008 0009 08:58:27 Msec=3750 True Az=112.995 Ze=-128.745 Az status=0008 Ze status=0009 08:58:28 Check angles 08:58:28 SkyScan query 08:58:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.18<-22012 Statuses=0008 0009 08:58:28 Msec=4500 True Az=112.995 Ze=-150.18 Az status=0008 Ze status=0009 08:58:28 Check angles 08:58:28 SkyScan query 08:58:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.985<-23399 Statuses=0008 0009 08:58:29 Msec=5250 True Az=112.995 Ze=-170.985 Az status=0008 Ze status=0009 08:58:29 Check angles 08:58:29 SkyScan query 08:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:58:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:58:30 Message to Master queued w/err=0: serial=118595 error=0 08:58:35 Received message from Master: op=Filter serial=118596 08:58:35 Color wheel filter change from 0 to 0 08:58:35 FLIGetFilterPos err=0 currentPosition=0 08:58:35 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:35 Filter is already there-color wheel unchanged 08:58:35 Received message from Master: op=Shutter serial=118597 08:58:35 Shutter LASER open 08:58:35 Received message from Camera: op=State serial=118599 08:58:35 GetSingleValue result=40 Value=cccccccc 08:58:35 SkyScan query 08:58:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:58:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:36 Parameters OK 08:58:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:36 Set A/D data flow result=40 08:58:36 Set A/D channel type result=40 08:58:36 Set A/D encoding result=40 08:58:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:36 Set channel filter=0.000000e+000 result=40 08:58:36 Config A/D Result=40 08:58:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:36 Get A/D filter: -9.255963e+061 result=40 08:58:36 Get A/D value=-858993460 result=40 08:58:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:36 Parameters OK 08:58:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:36 Set A/D data flow result=40 08:58:36 Set A/D channel type result=40 08:58:36 Set A/D encoding result=40 08:58:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:36 Set channel filter=0.000000e+000 result=40 08:58:36 Config A/D Result=40 08:58:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:36 Get A/D filter: -9.255963e+061 result=40 08:58:36 Get A/D value=-858993460 result=40 08:58:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:36 Aux= 08:58:36 Message to Camera, serial 118599 queued 08:58:44 Received message from Master: op=Shutter serial=118609 08:58:44 Shutter LASER close 08:58:45 Received message from Master: op=PointingHead serial=118613 08:58:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:58:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:58:45 Point started: ret=0 08:58:45 point_skyscan result=0 08:58:46 Check angles 08:58:46 SkyScan query 08:58:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 08:58:46 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 08:58:46 Check angles 08:58:46 SkyScan query 08:58:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.49<-20166 Statuses=0008 0009 08:58:47 Msec=750 True Az=112.995 Ze=-122.49 Az status=0008 Ze status=0009 08:58:47 Check angles 08:58:47 SkyScan query 08:58:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.52<-18768 Statuses=0008 0009 08:58:48 Msec=1500 True Az=112.995 Ze=-101.52 Az status=0008 Ze status=0009 08:58:48 Check angles 08:58:48 SkyScan query 08:58:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.55<-17370 Statuses=0008 0009 08:58:48 Msec=2250 True Az=112.995 Ze=-80.55 Az status=0008 Ze status=0009 08:58:49 Check angles 08:58:49 SkyScan query 08:58:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.61<-15974 Statuses=0008 0009 08:58:49 Msec=3000 True Az=112.995 Ze=-59.61 Az status=0008 Ze status=0009 08:58:49 Check angles 08:58:49 SkyScan query 08:58:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.145<-14543 Statuses=0008 0009 08:58:50 Msec=3750 True Az=112.995 Ze=-38.145 Az status=0008 Ze status=0009 08:58:50 Check angles 08:58:50 SkyScan query 08:58:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.22<-13148 Statuses=0008 0009 08:58:51 Msec=4500 True Az=112.995 Ze=-17.22 Az status=0008 Ze status=0009 08:58:51 Check angles 08:58:51 SkyScan query 08:58:51 SkyScan query done: ret=0 az=112.995<-7533 ze=3.735<-11751 Statuses=0008 0009 08:58:51 Msec=5250 True Az=112.995 Ze=3.735 Az status=0008 Ze status=0009 08:58:52 Check angles 08:58:52 SkyScan query 08:58:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:58:52 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:58:52 Message to Master queued w/err=0: serial=118613 error=0 08:58:57 Received message from Master: op=Filter serial=118614 08:58:57 Color wheel filter change from 0 to 0 08:58:57 FLIGetFilterPos err=0 currentPosition=0 08:58:57 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:57 Filter is already there-color wheel unchanged 08:58:57 Received message from Master: op=Shutter serial=118615 08:58:57 Shutter LASER close 08:58:58 Received message from Camera: op=State serial=118617 08:58:58 GetSingleValue result=40 Value=cccccccc 08:58:58 SkyScan query 08:58:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:58:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:58 Parameters OK 08:58:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:58 Set A/D data flow result=40 08:58:58 Set A/D channel type result=40 08:58:58 Set A/D encoding result=40 08:58:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:58 Set channel filter=0.000000e+000 result=40 08:58:58 Config A/D Result=40 08:58:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:58 Get A/D filter: -9.255963e+061 result=40 08:58:58 Get A/D value=-858993460 result=40 08:58:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:58 Parameters OK 08:58:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:58 Set A/D data flow result=40 08:58:58 Set A/D channel type result=40 08:58:58 Set A/D encoding result=40 08:58:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:58 Set channel filter=0.000000e+000 result=40 08:58:58 Config A/D Result=40 08:58:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:58 Get A/D filter: -9.255963e+061 result=40 08:58:58 Get A/D value=-858993460 result=40 08:58:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:58 Aux= 08:58:58 Message to Camera, serial 118617 queued 08:59:35 Received message from Master: op=PointingHead serial=118630 08:59:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:59:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:59:35 Point started: ret=0 08:59:35 point_skyscan result=0 08:59:36 Check angles 08:59:36 SkyScan query 08:59:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:59:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:59:37 Message to Master queued w/err=0: serial=118630 error=0 08:59:42 Received message from Master: op=Filter serial=118631 08:59:42 Color wheel filter change from 0 to 0 08:59:42 FLIGetFilterPos err=0 currentPosition=0 08:59:42 FLIGetStepsRemaining err=0 RemainingSteps=0 08:59:42 Filter is already there-color wheel unchanged 08:59:42 Received message from Master: op=Shutter serial=118632 08:59:42 Shutter LASER close 08:59:42 Received message from Camera: op=State serial=118634 08:59:42 GetSingleValue result=40 Value=cccccccc 08:59:42 SkyScan query 08:59:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:59:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:42 Parameters OK 08:59:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:42 Set A/D data flow result=40 08:59:42 Set A/D channel type result=40 08:59:42 Set A/D encoding result=40 08:59:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:42 Set channel filter=0.000000e+000 result=40 08:59:42 Config A/D Result=40 08:59:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:42 Get A/D filter: -9.255963e+061 result=40 08:59:42 Get A/D value=-858993460 result=40 08:59:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:42 Parameters OK 08:59:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:42 Set A/D data flow result=40 08:59:42 Set A/D channel type result=40 08:59:42 Set A/D encoding result=40 08:59:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:42 Set channel filter=0.000000e+000 result=40 08:59:42 Config A/D Result=40 08:59:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:42 Get A/D filter: -9.255963e+061 result=40 08:59:42 Get A/D value=-858993460 result=40 08:59:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:59:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:59:42 Aux= 08:59:42 Message to Camera, serial 118634 queued 09:00:19 Received message from Master: op=PointingHead serial=118647 09:00:19 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:00:19 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:00:20 Point started: ret=0 09:00:20 point_skyscan result=0 09:00:20 Check angles 09:00:20 SkyScan query 09:00:21 SkyScan query done: ret=0 az=136.545<-9103 ze=-6.51<-12434 Statuses=0009 0008 09:00:21 Msec=0 True Az=136.545 Ze=-6.51 Az status=0009 Ze status=0008 09:00:21 Check angles 09:00:21 SkyScan query 09:00:22 SkyScan query done: ret=0 az=154.395<-10293 ze=-6.495<-12433 Statuses=0009 0008 09:00:22 Msec=750 True Az=154.395 Ze=-6.495 Az status=0009 Ze status=0008 09:00:22 Check angles 09:00:22 SkyScan query 09:00:23 SkyScan query done: ret=0 az=171.78<-11452 ze=-6.495<-12433 Statuses=0009 0008 09:00:23 Msec=1500 True Az=171.78 Ze=-6.495 Az status=0009 Ze status=0008 09:00:23 Check angles 09:00:23 SkyScan query 09:00:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:00:23 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:00:23 Message to Master queued w/err=0: serial=118647 error=0 09:00:28 Received message from Master: op=Filter serial=118648 09:00:28 Color wheel filter change from 0 to 0 09:00:28 FLIGetFilterPos err=0 currentPosition=0 09:00:28 FLIGetStepsRemaining err=0 RemainingSteps=0 09:00:28 Filter is already there-color wheel unchanged 09:00:29 Received message from Master: op=Shutter serial=118649 09:00:29 Shutter LASER close 09:00:29 Received message from Camera: op=State serial=118651 09:00:29 GetSingleValue result=40 Value=cccccccc 09:00:29 SkyScan query 09:00:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:00:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:29 Parameters OK 09:00:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:29 Set A/D data flow result=40 09:00:29 Set A/D channel type result=40 09:00:29 Set A/D encoding result=40 09:00:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:29 Set channel filter=0.000000e+000 result=40 09:00:29 Config A/D Result=40 09:00:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:29 Get A/D filter: -9.255963e+061 result=40 09:00:29 Get A/D value=-858993460 result=40 09:00:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:29 Parameters OK 09:00:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:29 Set A/D data flow result=40 09:00:29 Set A/D channel type result=40 09:00:29 Set A/D encoding result=40 09:00:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:29 Set channel filter=0.000000e+000 result=40 09:00:29 Config A/D Result=40 09:00:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:29 Get A/D filter: -9.255963e+061 result=40 09:00:29 Get A/D value=-858993460 result=40 09:00:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:00:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:00:29 Aux= 09:00:29 Message to Camera, serial 118651 queued 09:01:06 Received message from Master: op=PointingHead serial=118664 09:01:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:01:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:01:06 Point started: ret=0 09:01:06 point_skyscan result=0 09:01:07 Check angles 09:01:07 SkyScan query 09:01:08 SkyScan query done: ret=0 az=153.12<-10208 ze=6.51<-11566 Statuses=0009 0008 09:01:08 Msec=0 True Az=153.12 Ze=6.51 Az status=0009 Ze status=0008 09:01:08 Check angles 09:01:08 SkyScan query 09:01:08 SkyScan query done: ret=0 az=135.6<-9040 ze=6.495<-11567 Statuses=0009 0008 09:01:08 Msec=750 True Az=135.6 Ze=6.495 Az status=0009 Ze status=0008 09:01:09 Check angles 09:01:09 SkyScan query 09:01:09 SkyScan query done: ret=0 az=117.795<-7853 ze=6.495<-11567 Statuses=0009 0008 09:01:09 Msec=1500 True Az=117.795 Ze=6.495 Az status=0009 Ze status=0008 09:01:09 Check angles 09:01:09 SkyScan query 09:01:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:01:10 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:01:10 Message to Master queued w/err=0: serial=118664 error=0 09:01:15 Received message from Master: op=Filter serial=118665 09:01:15 Color wheel filter change from 0 to 0 09:01:15 FLIGetFilterPos err=0 currentPosition=0 09:01:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:01:15 Filter is already there-color wheel unchanged 09:01:15 Received message from Master: op=Shutter serial=118666 09:01:15 Shutter LASER close 09:01:15 Received message from Camera: op=State serial=118668 09:01:15 GetSingleValue result=40 Value=cccccccc 09:01:15 SkyScan query 09:01:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:01:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:16 Parameters OK 09:01:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:16 Set A/D data flow result=40 09:01:16 Set A/D channel type result=40 09:01:16 Set A/D encoding result=40 09:01:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:16 Set channel filter=0.000000e+000 result=40 09:01:16 Config A/D Result=40 09:01:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:16 Get A/D filter: -9.255963e+061 result=40 09:01:16 Get A/D value=-858993460 result=40 09:01:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:16 Parameters OK 09:01:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:16 Set A/D data flow result=40 09:01:16 Set A/D channel type result=40 09:01:16 Set A/D encoding result=40 09:01:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:16 Set channel filter=0.000000e+000 result=40 09:01:16 Config A/D Result=40 09:01:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:16 Get A/D filter: -9.255963e+061 result=40 09:01:16 Get A/D value=-858993460 result=40 09:01:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:01:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:01:16 Aux= 09:01:16 Message to Camera, serial 118668 queued 09:01:53 Received message from Master: op=PointingHead serial=118681 09:01:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:01:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:01:53 Point started: ret=0 09:01:53 point_skyscan result=0 09:01:54 Check angles 09:01:54 SkyScan query 09:01:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.73<-13582 Statuses=0008 0009 09:01:54 Msec=0 True Az=112.995 Ze=-23.73 Az status=0008 Ze status=0009 09:01:54 Check angles 09:01:54 SkyScan query 09:01:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.7<-14980 Statuses=0008 0009 09:01:55 Msec=750 True Az=112.995 Ze=-44.7 Az status=0008 Ze status=0009 09:01:55 Check angles 09:01:55 SkyScan query 09:01:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.64<-16376 Statuses=0008 0009 09:01:56 Msec=1500 True Az=112.995 Ze=-65.64 Az status=0008 Ze status=0009 09:01:56 Check angles 09:01:56 SkyScan query 09:01:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.58<-17772 Statuses=0008 0009 09:01:57 Msec=2250 True Az=112.995 Ze=-86.58 Az status=0008 Ze status=0009 09:01:57 Check angles 09:01:57 SkyScan query 09:01:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.55<-19170 Statuses=0008 0009 09:01:57 Msec=3000 True Az=112.995 Ze=-107.55 Az status=0008 Ze status=0009 09:01:57 Check angles 09:01:57 SkyScan query 09:01:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.955<-20597 Statuses=0008 0009 09:01:58 Msec=3750 True Az=112.995 Ze=-128.955 Az status=0008 Ze status=0009 09:01:58 Check angles 09:01:58 SkyScan query 09:01:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.94<-21996 Statuses=0008 0009 09:01:59 Msec=4500 True Az=112.995 Ze=-149.94 Az status=0008 Ze status=0009 09:01:59 Check angles 09:01:59 SkyScan query 09:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.835<-23389 Statuses=0008 0009 09:02:00 Msec=5250 True Az=112.995 Ze=-170.835 Az status=0008 Ze status=0009 09:02:00 Check angles 09:02:00 SkyScan query 09:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:02:00 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:02:00 Message to Master queued w/err=0: serial=118681 error=0 09:02:05 Received message from Master: op=Filter serial=118682 09:02:05 Color wheel filter change from 0 to 0 09:02:05 FLIGetFilterPos err=0 currentPosition=0 09:02:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:02:05 Filter is already there-color wheel unchanged 09:02:05 Received message from Master: op=Shutter serial=118683 09:02:05 Shutter LASER open 09:02:06 Received message from Camera: op=State serial=118685 09:02:06 GetSingleValue result=40 Value=cccccccc 09:02:06 SkyScan query 09:02:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:02:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:06 Parameters OK 09:02:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:06 Set A/D data flow result=40 09:02:06 Set A/D channel type result=40 09:02:06 Set A/D encoding result=40 09:02:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:06 Set channel filter=0.000000e+000 result=40 09:02:06 Config A/D Result=40 09:02:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:06 Get A/D filter: -9.255963e+061 result=40 09:02:06 Get A/D value=-858993460 result=40 09:02:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:06 Parameters OK 09:02:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:06 Set A/D data flow result=40 09:02:06 Set A/D channel type result=40 09:02:06 Set A/D encoding result=40 09:02:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:06 Set channel filter=0.000000e+000 result=40 09:02:06 Config A/D Result=40 09:02:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:06 Get A/D filter: -9.255963e+061 result=40 09:02:06 Get A/D value=-858993460 result=40 09:02:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:02:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:02:06 Aux= 09:02:06 Message to Camera, serial 118685 queued 09:02:15 Received message from Master: op=Shutter serial=118695 09:02:15 Shutter LASER close 09:02:15 Received message from Master: op=PointingHead serial=118699 09:02:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:02:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:02:15 Point started: ret=0 09:02:15 point_skyscan result=0 09:02:16 Check angles 09:02:16 SkyScan query 09:02:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.295<-21553 Statuses=0008 0009 09:02:17 Msec=0 True Az=112.995 Ze=-143.295 Az status=0008 Ze status=0009 09:02:17 Check angles 09:02:17 SkyScan query 09:02:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.355<-20157 Statuses=0008 0009 09:02:18 Msec=750 True Az=112.995 Ze=-122.355 Az status=0008 Ze status=0009 09:02:18 Check angles 09:02:18 SkyScan query 09:02:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.4<-18760 Statuses=0008 0009 09:02:18 Msec=1500 True Az=112.995 Ze=-101.4 Az status=0008 Ze status=0009 09:02:18 Check angles 09:02:18 SkyScan query 09:02:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.43<-17362 Statuses=0008 0009 09:02:19 Msec=2250 True Az=112.995 Ze=-80.43 Az status=0008 Ze status=0009 09:02:19 Check angles 09:02:19 SkyScan query 09:02:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.475<-15965 Statuses=0008 0009 09:02:20 Msec=3000 True Az=112.995 Ze=-59.475 Az status=0008 Ze status=0009 09:02:20 Check angles 09:02:20 SkyScan query 09:02:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 09:02:21 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 09:02:21 Check angles 09:02:21 SkyScan query 09:02:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.07<-13138 Statuses=0008 0009 09:02:21 Msec=4500 True Az=112.995 Ze=-17.07 Az status=0008 Ze status=0009 09:02:21 Check angles 09:02:21 SkyScan query 09:02:22 SkyScan query done: ret=0 az=112.995<-7533 ze=3.885<-11741 Statuses=0008 0009 09:02:22 Msec=5250 True Az=112.995 Ze=3.885 Az status=0008 Ze status=0009 09:02:22 Check angles 09:02:22 SkyScan query 09:02:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:02:23 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:02:23 Message to Master queued w/err=0: serial=118699 error=0 09:02:28 Received message from Master: op=Filter serial=118700 09:02:28 Color wheel filter change from 0 to 0 09:02:28 FLIGetFilterPos err=0 currentPosition=0 09:02:28 FLIGetStepsRemaining err=0 RemainingSteps=0 09:02:28 Filter is already there-color wheel unchanged 09:02:28 Received message from Master: op=Shutter serial=118701 09:02:28 Shutter LASER close 09:02:28 Received message from Camera: op=State serial=118703 09:02:28 GetSingleValue result=40 Value=cccccccc 09:02:28 SkyScan query 09:02:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:02:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:29 Parameters OK 09:02:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:29 Set A/D data flow result=40 09:02:29 Set A/D channel type result=40 09:02:29 Set A/D encoding result=40 09:02:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:29 Set channel filter=0.000000e+000 result=40 09:02:29 Config A/D Result=40 09:02:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:29 Get A/D filter: -9.255963e+061 result=40 09:02:29 Get A/D value=-858993460 result=40 09:02:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:29 Parameters OK 09:02:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:29 Set A/D data flow result=40 09:02:29 Set A/D channel type result=40 09:02:29 Set A/D encoding result=40 09:02:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:29 Set channel filter=0.000000e+000 result=40 09:02:29 Config A/D Result=40 09:02:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:29 Get A/D filter: -9.255963e+061 result=40 09:02:29 Get A/D value=-858993460 result=40 09:02:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:02:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:02:29 Aux= 09:02:29 Message to Camera, serial 118703 queued 09:03:06 Received message from Master: op=PointingHead serial=118716 09:03:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:03:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:03:06 Point started: ret=0 09:03:06 point_skyscan result=0 09:03:07 Check angles 09:03:07 SkyScan query 09:03:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:03:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:03:07 Message to Master queued w/err=0: serial=118716 error=0 09:03:12 Received message from Master: op=Filter serial=118717 09:03:12 Color wheel filter change from 0 to 0 09:03:12 FLIGetFilterPos err=0 currentPosition=0 09:03:12 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:12 Filter is already there-color wheel unchanged 09:03:12 Received message from Master: op=Shutter serial=118718 09:03:12 Shutter LASER close 09:03:12 Received message from Camera: op=State serial=118720 09:03:12 GetSingleValue result=40 Value=cccccccc 09:03:12 SkyScan query 09:03:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:03:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:13 Parameters OK 09:03:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:13 Set A/D data flow result=40 09:03:13 Set A/D channel type result=40 09:03:13 Set A/D encoding result=40 09:03:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:13 Set channel filter=0.000000e+000 result=40 09:03:13 Config A/D Result=40 09:03:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:13 Get A/D filter: -9.255963e+061 result=40 09:03:13 Get A/D value=-858993460 result=40 09:03:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:13 Parameters OK 09:03:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:13 Set A/D data flow result=40 09:03:13 Set A/D channel type result=40 09:03:13 Set A/D encoding result=40 09:03:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:13 Set channel filter=0.000000e+000 result=40 09:03:13 Config A/D Result=40 09:03:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:13 Get A/D filter: -9.255963e+061 result=40 09:03:13 Get A/D value=-858993460 result=40 09:03:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:03:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:03:13 Aux= 09:03:13 Message to Camera, serial 118720 queued 09:03:38 Received message from Master: op=Identify serial=118721 09:03:50 Received message from Master: op=PointingHead serial=118736 09:03:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:03:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:03:50 Point started: ret=0 09:03:50 point_skyscan result=0 [UTC 2019-3-5 09:03:50] 09:03:51 Check angles 09:03:51 SkyScan query 09:03:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:03:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:03:52 Message to Master queued w/err=0: serial=118736 error=0 09:03:57 Received message from Master: op=Filter serial=118737 09:03:57 Color wheel filter change from 0 to 0 09:03:57 FLIGetFilterPos err=0 currentPosition=0 09:03:57 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:57 Filter is already there-color wheel unchanged 09:03:57 Received message from Master: op=Shutter serial=118738 09:03:57 Shutter LASER close 09:03:57 Received message from Camera: op=State serial=118740 09:03:57 GetSingleValue result=40 Value=cccccccc 09:03:57 SkyScan query 09:03:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:03:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:57 Parameters OK 09:03:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:57 Set A/D data flow result=40 09:03:57 Set A/D channel type result=40 09:03:57 Set A/D encoding result=40 09:03:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:57 Set channel filter=0.000000e+000 result=40 09:03:57 Config A/D Result=40 09:03:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:57 Get A/D filter: -9.255963e+061 result=40 09:03:57 Get A/D value=-858993460 result=40 09:03:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:57 Parameters OK 09:03:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:57 Set A/D data flow result=40 09:03:57 Set A/D channel type result=40 09:03:57 Set A/D encoding result=40 09:03:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:57 Set channel filter=0.000000e+000 result=40 09:03:57 Config A/D Result=40 09:03:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:57 Get A/D filter: -9.255963e+061 result=40 09:03:57 Get A/D value=-858993460 result=40 09:03:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:03:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:03:57 Aux= 09:03:57 Message to Camera, serial 118740 queued 09:04:34 Received message from Master: op=PointingHead serial=118753 09:04:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:04:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:04:34 Point started: ret=0 09:04:34 point_skyscan result=0 09:04:35 Check angles 09:04:35 SkyScan query 09:04:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:04:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:04:36 Message to Master queued w/err=0: serial=118753 error=0 09:04:41 Received message from Master: op=Filter serial=118754 09:04:41 Color wheel filter change from 0 to 0 09:04:41 FLIGetFilterPos err=0 currentPosition=0 09:04:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:04:41 Filter is already there-color wheel unchanged 09:04:41 Received message from Master: op=Shutter serial=118755 09:04:41 Shutter LASER close 09:04:41 Received message from Camera: op=State serial=118757 09:04:41 GetSingleValue result=40 Value=cccccccc 09:04:41 SkyScan query 09:04:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:04:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:42 Parameters OK 09:04:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:42 Set A/D data flow result=40 09:04:42 Set A/D channel type result=40 09:04:42 Set A/D encoding result=40 09:04:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:42 Set channel filter=0.000000e+000 result=40 09:04:42 Config A/D Result=40 09:04:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:42 Get A/D filter: -9.255963e+061 result=40 09:04:42 Get A/D value=-858993460 result=40 09:04:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:42 Parameters OK 09:04:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:42 Set A/D data flow result=40 09:04:42 Set A/D channel type result=40 09:04:42 Set A/D encoding result=40 09:04:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:42 Set channel filter=0.000000e+000 result=40 09:04:42 Config A/D Result=40 09:04:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:42 Get A/D filter: -9.255963e+061 result=40 09:04:42 Get A/D value=-858993460 result=40 09:04:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:42 Aux= 09:04:42 Message to Camera, serial 118757 queued 09:05:18 Received message from Master: op=PointingHead serial=118770 09:05:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:05:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:05:19 Point started: ret=0 09:05:19 point_skyscan result=0 09:05:20 Check angles 09:05:20 SkyScan query 09:05:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.685<-13579 Statuses=0008 0009 09:05:20 Msec=0 True Az=112.995 Ze=-23.685 Az status=0008 Ze status=0009 09:05:20 Check angles 09:05:20 SkyScan query 09:05:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.64<-14976 Statuses=0008 0009 09:05:21 Msec=750 True Az=112.995 Ze=-44.64 Az status=0008 Ze status=0009 09:05:21 Check angles 09:05:21 SkyScan query 09:05:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.565<-16371 Statuses=0008 0009 09:05:22 Msec=1500 True Az=112.995 Ze=-65.565 Az status=0008 Ze status=0009 09:05:22 Check angles 09:05:22 SkyScan query 09:05:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-87<-17800 Statuses=0008 0009 09:05:22 Msec=2250 True Az=112.995 Ze=-87 Az status=0008 Ze status=0009 09:05:23 Check angles 09:05:23 SkyScan query 09:05:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.94<-19196 Statuses=0008 0009 09:05:23 Msec=3000 True Az=112.995 Ze=-107.94 Az status=0008 Ze status=0009 09:05:23 Check angles 09:05:23 SkyScan query 09:05:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.91<-20594 Statuses=0008 0009 09:05:24 Msec=3750 True Az=112.995 Ze=-128.91 Az status=0008 Ze status=0009 09:05:24 Check angles 09:05:24 SkyScan query 09:05:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.315<-22021 Statuses=0008 0009 09:05:25 Msec=4500 True Az=112.995 Ze=-150.315 Az status=0008 Ze status=0009 09:05:25 Check angles 09:05:25 SkyScan query 09:05:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.105<-23407 Statuses=0008 0009 09:05:25 Msec=5250 True Az=112.995 Ze=-171.105 Az status=0008 Ze status=0009 09:05:26 Check angles 09:05:26 SkyScan query 09:05:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:05:26 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:05:26 Message to Master queued w/err=0: serial=118770 error=0 09:05:31 Received message from Master: op=Filter serial=118771 09:05:31 Color wheel filter change from 0 to 0 09:05:31 FLIGetFilterPos err=0 currentPosition=0 09:05:31 FLIGetStepsRemaining err=0 RemainingSteps=0 09:05:31 Filter is already there-color wheel unchanged 09:05:31 Received message from Master: op=Shutter serial=118772 09:05:31 Shutter LASER open 09:05:32 Received message from Camera: op=State serial=118774 09:05:32 GetSingleValue result=40 Value=cccccccc 09:05:32 SkyScan query 09:05:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:05:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:32 Parameters OK 09:05:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:32 Set A/D data flow result=40 09:05:32 Set A/D channel type result=40 09:05:32 Set A/D encoding result=40 09:05:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:32 Set channel filter=0.000000e+000 result=40 09:05:32 Config A/D Result=40 09:05:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:32 Get A/D filter: -9.255963e+061 result=40 09:05:32 Get A/D value=-858993460 result=40 09:05:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:32 Parameters OK 09:05:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:32 Set A/D data flow result=40 09:05:32 Set A/D channel type result=40 09:05:32 Set A/D encoding result=40 09:05:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:32 Set channel filter=0.000000e+000 result=40 09:05:32 Config A/D Result=40 09:05:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:32 Get A/D filter: -9.255963e+061 result=40 09:05:32 Get A/D value=-858993460 result=40 09:05:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:05:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:05:32 Aux= 09:05:32 Message to Camera, serial 118774 queued 09:05:41 Received message from Master: op=Shutter serial=118784 09:05:41 Shutter LASER close 09:05:41 Received message from Master: op=PointingHead serial=118788 09:05:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:05:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:05:41 Point started: ret=0 09:05:41 point_skyscan result=0 09:05:42 Check angles 09:05:42 SkyScan query 09:05:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.98<-21532 Statuses=0008 0009 09:05:43 Msec=0 True Az=112.995 Ze=-142.98 Az status=0008 Ze status=0009 09:05:43 Check angles 09:05:43 SkyScan query 09:05:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 09:05:44 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 09:05:44 Check angles 09:05:44 SkyScan query 09:05:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 09:05:44 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 09:05:44 Check angles 09:05:44 SkyScan query 09:05:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.1<-17340 Statuses=0008 0009 09:05:45 Msec=2250 True Az=112.995 Ze=-80.1 Az status=0008 Ze status=0009 09:05:45 Check angles 09:05:45 SkyScan query 09:05:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 09:05:46 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 09:05:46 Check angles 09:05:46 SkyScan query 09:05:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.13<-14542 Statuses=0008 0009 09:05:47 Msec=3750 True Az=112.995 Ze=-38.13 Az status=0008 Ze status=0009 09:05:47 Check angles 09:05:47 SkyScan query 09:05:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.205<-13147 Statuses=0008 0009 09:05:47 Msec=4500 True Az=112.995 Ze=-17.205 Az status=0008 Ze status=0009 09:05:47 Check angles 09:05:47 SkyScan query 09:05:48 SkyScan query done: ret=0 az=112.995<-7533 ze=3.765<-11749 Statuses=0008 0009 09:05:48 Msec=5250 True Az=112.995 Ze=3.765 Az status=0008 Ze status=0009 09:05:48 Check angles 09:05:48 SkyScan query 09:05:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:05:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:05:49 Message to Master queued w/err=0: serial=118788 error=0 09:05:54 Received message from Master: op=Filter serial=118789 09:05:54 Color wheel filter change from 0 to 0 09:05:54 FLIGetFilterPos err=0 currentPosition=0 09:05:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:05:54 Filter is already there-color wheel unchanged 09:05:54 Received message from Master: op=Shutter serial=118790 09:05:54 Shutter LASER close 09:05:54 Received message from Camera: op=State serial=118792 09:05:54 GetSingleValue result=40 Value=cccccccc 09:05:54 SkyScan query 09:05:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:05:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:55 Parameters OK 09:05:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:55 Set A/D data flow result=40 09:05:55 Set A/D channel type result=40 09:05:55 Set A/D encoding result=40 09:05:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:55 Set channel filter=0.000000e+000 result=40 09:05:55 Config A/D Result=40 09:05:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:55 Get A/D filter: -9.255963e+061 result=40 09:05:55 Get A/D value=-858993460 result=40 09:05:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:55 Parameters OK 09:05:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:55 Set A/D data flow result=40 09:05:55 Set A/D channel type result=40 09:05:55 Set A/D encoding result=40 09:05:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:55 Set channel filter=0.000000e+000 result=40 09:05:55 Config A/D Result=40 09:05:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:55 Get A/D filter: -9.255963e+061 result=40 09:05:55 Get A/D value=-858993460 result=40 09:05:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:05:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:05:55 Aux= 09:05:55 Message to Camera, serial 118792 queued 09:06:32 Received message from Master: op=PointingHead serial=118805 09:06:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:06:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:06:32 Point started: ret=0 09:06:32 point_skyscan result=0 09:06:33 Check angles 09:06:33 SkyScan query 09:06:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:06:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:06:33 Message to Master queued w/err=0: serial=118805 error=0 09:06:38 Received message from Master: op=Filter serial=118806 09:06:38 Color wheel filter change from 0 to 0 09:06:38 FLIGetFilterPos err=0 currentPosition=0 09:06:38 FLIGetStepsRemaining err=0 RemainingSteps=0 09:06:38 Filter is already there-color wheel unchanged 09:06:38 Received message from Master: op=Shutter serial=118807 09:06:38 Shutter LASER close 09:06:38 Received message from Camera: op=State serial=118809 09:06:38 GetSingleValue result=40 Value=cccccccc 09:06:38 SkyScan query 09:06:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:06:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:39 Parameters OK 09:06:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:39 Set A/D data flow result=40 09:06:39 Set A/D channel type result=40 09:06:39 Set A/D encoding result=40 09:06:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:39 Set channel filter=0.000000e+000 result=40 09:06:39 Config A/D Result=40 09:06:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:39 Get A/D filter: -9.255963e+061 result=40 09:06:39 Get A/D value=-858993460 result=40 09:06:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:39 Parameters OK 09:06:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:39 Set A/D data flow result=40 09:06:39 Set A/D channel type result=40 09:06:39 Set A/D encoding result=40 09:06:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:39 Set channel filter=0.000000e+000 result=40 09:06:39 Config A/D Result=40 09:06:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:39 Get A/D filter: -9.255963e+061 result=40 09:06:39 Get A/D value=-858993460 result=40 09:06:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:06:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:06:39 Aux= 09:06:39 Message to Camera, serial 118809 queued 09:07:16 Received message from Master: op=PointingHead serial=118822 09:07:16 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:07:16 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:07:16 Point started: ret=0 09:07:16 point_skyscan result=0 09:07:17 Check angles 09:07:17 SkyScan query 09:07:18 SkyScan query done: ret=0 az=135.99<-9066 ze=-6.51<-12434 Statuses=0009 0008 09:07:18 Msec=0 True Az=135.99 Ze=-6.51 Az status=0009 Ze status=0008 09:07:18 Check angles 09:07:18 SkyScan query 09:07:18 SkyScan query done: ret=0 az=153.465<-10231 ze=-6.495<-12433 Statuses=0009 0008 09:07:18 Msec=750 True Az=153.465 Ze=-6.495 Az status=0009 Ze status=0008 09:07:18 Check angles 09:07:18 SkyScan query 09:07:19 SkyScan query done: ret=0 az=171<-11400 ze=-6.495<-12433 Statuses=0009 0008 09:07:19 Msec=1500 True Az=171 Ze=-6.495 Az status=0009 Ze status=0008 09:07:19 Check angles 09:07:19 SkyScan query 09:07:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:07:20 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:07:20 Message to Master queued w/err=0: serial=118822 error=0 09:07:25 Received message from Master: op=Filter serial=118823 09:07:25 Color wheel filter change from 0 to 0 09:07:25 FLIGetFilterPos err=0 currentPosition=0 09:07:25 FLIGetStepsRemaining err=0 RemainingSteps=0 09:07:25 Filter is already there-color wheel unchanged 09:07:25 Received message from Master: op=Shutter serial=118824 09:07:25 Shutter LASER close 09:07:25 Received message from Camera: op=State serial=118826 09:07:25 GetSingleValue result=40 Value=cccccccc 09:07:25 SkyScan query 09:07:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:07:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:26 Parameters OK 09:07:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:26 Set A/D data flow result=40 09:07:26 Set A/D channel type result=40 09:07:26 Set A/D encoding result=40 09:07:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:26 Set channel filter=0.000000e+000 result=40 09:07:26 Config A/D Result=40 09:07:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:26 Get A/D filter: -9.255963e+061 result=40 09:07:26 Get A/D value=-858993460 result=40 09:07:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:26 Parameters OK 09:07:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:26 Set A/D data flow result=40 09:07:26 Set A/D channel type result=40 09:07:26 Set A/D encoding result=40 09:07:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:26 Set channel filter=0.000000e+000 result=40 09:07:26 Config A/D Result=40 09:07:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:26 Get A/D filter: -9.255963e+061 result=40 09:07:26 Get A/D value=-858993460 result=40 09:07:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:07:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:07:26 Aux= 09:07:26 Message to Camera, serial 118826 queued 09:08:02 Received message from Master: op=PointingHead serial=118839 09:08:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:08:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:08:03 Point started: ret=0 09:08:03 point_skyscan result=0 09:08:03 Check angles 09:08:03 SkyScan query 09:08:04 SkyScan query done: ret=0 az=153.075<-10205 ze=6.51<-11566 Statuses=0009 0008 09:08:04 Msec=0 True Az=153.075 Ze=6.51 Az status=0009 Ze status=0008 09:08:04 Check angles 09:08:04 SkyScan query 09:08:05 SkyScan query done: ret=0 az=135.57<-9038 ze=6.495<-11567 Statuses=0009 0008 09:08:05 Msec=750 True Az=135.57 Ze=6.495 Az status=0009 Ze status=0008 09:08:05 Check angles 09:08:05 SkyScan query 09:08:06 SkyScan query done: ret=0 az=118.125<-7875 ze=6.495<-11567 Statuses=0009 0008 09:08:06 Msec=1500 True Az=118.125 Ze=6.495 Az status=0009 Ze status=0008 09:08:06 Check angles 09:08:06 SkyScan query 09:08:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:08:06 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:08:06 Message to Master queued w/err=0: serial=118839 error=0 09:08:11 Received message from Master: op=Filter serial=118840 09:08:11 Color wheel filter change from 0 to 0 09:08:11 FLIGetFilterPos err=0 currentPosition=0 09:08:11 FLIGetStepsRemaining err=0 RemainingSteps=0 09:08:11 Filter is already there-color wheel unchanged 09:08:11 Received message from Master: op=Shutter serial=118841 09:08:11 Shutter LASER close 09:08:12 Received message from Camera: op=State serial=118843 09:08:12 GetSingleValue result=40 Value=cccccccc 09:08:12 SkyScan query 09:08:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:08:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:12 Parameters OK 09:08:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:12 Set A/D data flow result=40 09:08:12 Set A/D channel type result=40 09:08:12 Set A/D encoding result=40 09:08:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:12 Set channel filter=0.000000e+000 result=40 09:08:12 Config A/D Result=40 09:08:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:12 Get A/D filter: -9.255963e+061 result=40 09:08:12 Get A/D value=-858993460 result=40 09:08:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:12 Parameters OK 09:08:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:12 Set A/D data flow result=40 09:08:12 Set A/D channel type result=40 09:08:12 Set A/D encoding result=40 09:08:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:12 Set channel filter=0.000000e+000 result=40 09:08:12 Config A/D Result=40 09:08:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:12 Get A/D filter: -9.255963e+061 result=40 09:08:12 Get A/D value=-858993460 result=40 09:08:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:08:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:08:12 Aux= 09:08:12 Message to Camera, serial 118843 queued 09:08:49 Received message from Master: op=PointingHead serial=118856 09:08:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:08:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:08:49 Point started: ret=0 09:08:49 point_skyscan result=0 09:08:50 Check angles 09:08:50 SkyScan query 09:08:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.535<-13569 Statuses=0008 0009 09:08:51 Msec=0 True Az=112.995 Ze=-23.535 Az status=0008 Ze status=0009 09:08:51 Check angles 09:08:51 SkyScan query 09:08:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 09:08:51 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 09:08:52 Check angles 09:08:52 SkyScan query 09:08:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.865<-16391 Statuses=0008 0009 09:08:52 Msec=1500 True Az=112.995 Ze=-65.865 Az status=0008 Ze status=0009 09:08:52 Check angles 09:08:52 SkyScan query 09:08:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.805<-17787 Statuses=0008 0009 09:08:53 Msec=2250 True Az=112.995 Ze=-86.805 Az status=0008 Ze status=0009 09:08:53 Check angles 09:08:53 SkyScan query 09:08:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 09:08:54 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 09:08:54 Check angles 09:08:54 SkyScan query 09:08:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.745<-20583 Statuses=0008 0009 09:08:54 Msec=3750 True Az=112.995 Ze=-128.745 Az status=0008 Ze status=0009 09:08:55 Check angles 09:08:55 SkyScan query 09:08:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 09:08:55 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 09:08:55 Check angles 09:08:55 SkyScan query 09:08:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.64<-23376 Statuses=0008 0009 09:08:56 Msec=5250 True Az=112.995 Ze=-170.64 Az status=0008 Ze status=0009 09:08:56 Check angles 09:08:56 SkyScan query 09:08:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:08:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:08:57 Message to Master queued w/err=0: serial=118856 error=0 09:09:02 Received message from Master: op=Filter serial=118857 09:09:02 Color wheel filter change from 0 to 0 09:09:02 FLIGetFilterPos err=0 currentPosition=0 09:09:02 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:02 Filter is already there-color wheel unchanged 09:09:02 Received message from Master: op=Shutter serial=118858 09:09:02 Shutter LASER open 09:09:02 Received message from Camera: op=State serial=118860 09:09:02 GetSingleValue result=40 Value=cccccccc 09:09:02 SkyScan query 09:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:09:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:03 Parameters OK 09:09:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:03 Set A/D data flow result=40 09:09:03 Set A/D channel type result=40 09:09:03 Set A/D encoding result=40 09:09:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:03 Set channel filter=0.000000e+000 result=40 09:09:03 Config A/D Result=40 09:09:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:03 Get A/D filter: -9.255963e+061 result=40 09:09:03 Get A/D value=-858993460 result=40 09:09:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:03 Parameters OK 09:09:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:03 Set A/D data flow result=40 09:09:03 Set A/D channel type result=40 09:09:03 Set A/D encoding result=40 09:09:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:03 Set channel filter=0.000000e+000 result=40 09:09:03 Config A/D Result=40 09:09:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:03 Get A/D filter: -9.255963e+061 result=40 09:09:03 Get A/D value=-858993460 result=40 09:09:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:09:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:09:03 Aux= 09:09:03 Message to Camera, serial 118860 queued 09:09:11 Received message from Master: op=Shutter serial=118870 09:09:11 Shutter LASER close 09:09:11 Received message from Master: op=PointingHead serial=118874 09:09:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:09:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:09:12 Point started: ret=0 09:09:12 point_skyscan result=0 09:09:13 Check angles 09:09:13 SkyScan query 09:09:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 09:09:13 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 09:09:13 Check angles 09:09:13 SkyScan query 09:09:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.8<-20120 Statuses=0008 0009 09:09:14 Msec=750 True Az=112.995 Ze=-121.8 Az status=0008 Ze status=0009 09:09:14 Check angles 09:09:14 SkyScan query 09:09:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.395<-18693 Statuses=0008 0009 09:09:15 Msec=1500 True Az=112.995 Ze=-100.395 Az status=0008 Ze status=0009 09:09:15 Check angles 09:09:15 SkyScan query 09:09:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.44<-17296 Statuses=0008 0009 09:09:15 Msec=2250 True Az=112.995 Ze=-79.44 Az status=0008 Ze status=0009 09:09:16 Check angles 09:09:16 SkyScan query 09:09:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.485<-15899 Statuses=0008 0009 09:09:16 Msec=3000 True Az=112.995 Ze=-58.485 Az status=0008 Ze status=0009 09:09:16 Check angles 09:09:16 SkyScan query 09:09:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.545<-14503 Statuses=0008 0009 09:09:17 Msec=3750 True Az=112.995 Ze=-37.545 Az status=0008 Ze status=0009 09:09:17 Check angles 09:09:17 SkyScan query 09:09:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.575<-13105 Statuses=0008 0009 09:09:18 Msec=4500 True Az=112.995 Ze=-16.575 Az status=0008 Ze status=0009 09:09:18 Check angles 09:09:18 SkyScan query 09:09:18 SkyScan query done: ret=0 az=112.995<-7533 ze=4.605<-11693 Statuses=0008 0009 09:09:18 Msec=5250 True Az=112.995 Ze=4.605 Az status=0008 Ze status=0009 09:09:19 Check angles 09:09:19 SkyScan query 09:09:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:09:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:09:19 Message to Master queued w/err=0: serial=118874 error=0 09:09:24 Received message from Master: op=Filter serial=118875 09:09:24 Color wheel filter change from 0 to 0 09:09:24 FLIGetFilterPos err=0 currentPosition=0 09:09:24 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:24 Filter is already there-color wheel unchanged 09:09:24 Received message from Master: op=Shutter serial=118876 09:09:24 Shutter LASER close 09:09:24 Received message from Camera: op=State serial=118878 09:09:24 GetSingleValue result=40 Value=cccccccc 09:09:24 SkyScan query 09:09:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:09:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:25 Parameters OK 09:09:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:25 Set A/D data flow result=40 09:09:25 Set A/D channel type result=40 09:09:25 Set A/D encoding result=40 09:09:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:25 Set channel filter=0.000000e+000 result=40 09:09:25 Config A/D Result=40 09:09:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:25 Get A/D filter: -9.255963e+061 result=40 09:09:25 Get A/D value=-858993460 result=40 09:09:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:25 Parameters OK 09:09:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:25 Set A/D data flow result=40 09:09:25 Set A/D channel type result=40 09:09:25 Set A/D encoding result=40 09:09:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:25 Set channel filter=0.000000e+000 result=40 09:09:25 Config A/D Result=40 09:09:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:25 Get A/D filter: -9.255963e+061 result=40 09:09:25 Get A/D value=-858993460 result=40 09:09:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:09:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:09:25 Aux= 09:09:25 Message to Camera, serial 118878 queued 09:10:01 Received message from Master: op=PointingHead serial=118890 09:10:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:10:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:10:01 Point started: ret=0 09:10:01 point_skyscan result=0 09:10:02 Check angles 09:10:02 SkyScan query 09:10:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:10:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:10:03 Message to Master queued w/err=0: serial=118890 error=0 09:10:08 Received message from Master: op=Filter serial=118891 09:10:08 Color wheel filter change from 0 to 0 09:10:08 FLIGetFilterPos err=0 currentPosition=0 09:10:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:10:08 Filter is already there-color wheel unchanged 09:10:08 Received message from Master: op=Shutter serial=118892 09:10:08 Shutter LASER close 09:10:08 Received message from Camera: op=State serial=118894 09:10:08 GetSingleValue result=40 Value=cccccccc 09:10:08 SkyScan query 09:10:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:10:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:08 Parameters OK 09:10:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:08 Set A/D data flow result=40 09:10:08 Set A/D channel type result=40 09:10:08 Set A/D encoding result=40 09:10:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:08 Set channel filter=0.000000e+000 result=40 09:10:08 Config A/D Result=40 09:10:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:08 Get A/D filter: -9.255963e+061 result=40 09:10:08 Get A/D value=-858993460 result=40 09:10:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:08 Parameters OK 09:10:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:08 Set A/D data flow result=40 09:10:08 Set A/D channel type result=40 09:10:08 Set A/D encoding result=40 09:10:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:08 Set channel filter=0.000000e+000 result=40 09:10:08 Config A/D Result=40 09:10:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:08 Get A/D filter: -9.255963e+061 result=40 09:10:08 Get A/D value=-858993460 result=40 09:10:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:08 Aux= 09:10:08 Message to Camera, serial 118894 queued 09:10:45 Received message from Master: op=PointingHead serial=118907 09:10:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:10:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:10:46 Point started: ret=0 09:10:46 point_skyscan result=0 09:10:46 Check angles 09:10:46 SkyScan query 09:10:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:10:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:10:47 Message to Master queued w/err=0: serial=118907 error=0 09:10:52 Received message from Master: op=Filter serial=118908 09:10:52 Color wheel filter change from 0 to 0 09:10:52 FLIGetFilterPos err=0 currentPosition=0 09:10:52 FLIGetStepsRemaining err=0 RemainingSteps=0 09:10:52 Filter is already there-color wheel unchanged 09:10:52 Received message from Master: op=Shutter serial=118909 09:10:52 Shutter LASER close 09:10:52 Received message from Camera: op=State serial=118911 09:10:52 GetSingleValue result=40 Value=cccccccc 09:10:52 SkyScan query 09:10:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:10:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:53 Parameters OK 09:10:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:53 Set A/D data flow result=40 09:10:53 Set A/D channel type result=40 09:10:53 Set A/D encoding result=40 09:10:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:53 Set channel filter=0.000000e+000 result=40 09:10:53 Config A/D Result=40 09:10:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:53 Get A/D filter: -9.255963e+061 result=40 09:10:53 Get A/D value=-858993460 result=40 09:10:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:53 Parameters OK 09:10:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:53 Set A/D data flow result=40 09:10:53 Set A/D channel type result=40 09:10:53 Set A/D encoding result=40 09:10:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:53 Set channel filter=0.000000e+000 result=40 09:10:53 Config A/D Result=40 09:10:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:53 Get A/D filter: -9.255963e+061 result=40 09:10:53 Get A/D value=-858993460 result=40 09:10:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:53 Aux= 09:10:53 Message to Camera, serial 118911 queued 09:11:30 Received message from Master: op=PointingHead serial=118924 09:11:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:11:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:11:30 Point started: ret=0 09:11:30 point_skyscan result=0 09:11:31 Check angles 09:11:31 SkyScan query 09:11:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:11:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:11:31 Message to Master queued w/err=0: serial=118924 error=0 09:11:36 Received message from Master: op=Filter serial=118925 09:11:36 Color wheel filter change from 0 to 0 09:11:36 FLIGetFilterPos err=0 currentPosition=0 09:11:36 FLIGetStepsRemaining err=0 RemainingSteps=0 09:11:36 Filter is already there-color wheel unchanged 09:11:36 Received message from Master: op=Shutter serial=118926 09:11:36 Shutter LASER close 09:11:36 Received message from Camera: op=State serial=118928 09:11:36 GetSingleValue result=40 Value=cccccccc 09:11:36 SkyScan query 09:11:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:11:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:37 Parameters OK 09:11:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:37 Set A/D data flow result=40 09:11:37 Set A/D channel type result=40 09:11:37 Set A/D encoding result=40 09:11:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:37 Set channel filter=0.000000e+000 result=40 09:11:37 Config A/D Result=40 09:11:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:37 Get A/D filter: -9.255963e+061 result=40 09:11:37 Get A/D value=-858993460 result=40 09:11:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:37 Parameters OK 09:11:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:37 Set A/D data flow result=40 09:11:37 Set A/D channel type result=40 09:11:37 Set A/D encoding result=40 09:11:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:37 Set channel filter=0.000000e+000 result=40 09:11:37 Config A/D Result=40 09:11:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:37 Get A/D filter: -9.255963e+061 result=40 09:11:37 Get A/D value=-858993460 result=40 09:11:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:11:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:11:37 Aux= 09:11:37 Message to Camera, serial 118928 queued 09:12:14 Received message from Master: op=PointingHead serial=118941 09:12:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:12:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:12:14 Point started: ret=0 09:12:14 point_skyscan result=0 09:12:15 Check angles 09:12:15 SkyScan query 09:12:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 09:12:16 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 09:12:16 Check angles 09:12:16 SkyScan query 09:12:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.01<-14934 Statuses=0008 0009 09:12:16 Msec=750 True Az=112.995 Ze=-44.01 Az status=0008 Ze status=0009 09:12:16 Check angles 09:12:16 SkyScan query 09:12:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.935<-16329 Statuses=0008 0009 09:12:17 Msec=1500 True Az=112.995 Ze=-64.935 Az status=0008 Ze status=0009 09:12:17 Check angles 09:12:17 SkyScan query 09:12:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.905<-17727 Statuses=0008 0009 09:12:18 Msec=2250 True Az=112.995 Ze=-85.905 Az status=0008 Ze status=0009 09:12:18 Check angles 09:12:18 SkyScan query 09:12:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.845<-19123 Statuses=0008 0009 09:12:19 Msec=3000 True Az=112.995 Ze=-106.845 Az status=0008 Ze status=0009 09:12:19 Check angles 09:12:19 SkyScan query 09:12:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.77<-20518 Statuses=0008 0009 09:12:19 Msec=3750 True Az=112.995 Ze=-127.77 Az status=0008 Ze status=0009 09:12:19 Check angles 09:12:19 SkyScan query 09:12:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.71<-21914 Statuses=0008 0009 09:12:20 Msec=4500 True Az=112.995 Ze=-148.71 Az status=0008 Ze status=0009 09:12:20 Check angles 09:12:20 SkyScan query 09:12:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.65<-23310 Statuses=0008 0009 09:12:21 Msec=5250 True Az=112.995 Ze=-169.65 Az status=0008 Ze status=0009 09:12:21 Check angles 09:12:21 SkyScan query 09:12:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:12:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:12:22 Message to Master queued w/err=0: serial=118941 error=0 09:12:27 Received message from Master: op=Filter serial=118942 09:12:27 Color wheel filter change from 0 to 0 09:12:27 FLIGetFilterPos err=0 currentPosition=0 09:12:27 FLIGetStepsRemaining err=0 RemainingSteps=0 09:12:27 Filter is already there-color wheel unchanged 09:12:27 Received message from Master: op=Shutter serial=118943 09:12:27 Shutter LASER open 09:12:27 Received message from Camera: op=State serial=118945 09:12:27 GetSingleValue result=40 Value=cccccccc 09:12:27 SkyScan query 09:12:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:12:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:27 Parameters OK 09:12:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:27 Set A/D data flow result=40 09:12:27 Set A/D channel type result=40 09:12:27 Set A/D encoding result=40 09:12:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:27 Set channel filter=0.000000e+000 result=40 09:12:27 Config A/D Result=40 09:12:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:27 Get A/D filter: -9.255963e+061 result=40 09:12:27 Get A/D value=-858993460 result=40 09:12:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:27 Parameters OK 09:12:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:27 Set A/D data flow result=40 09:12:27 Set A/D channel type result=40 09:12:27 Set A/D encoding result=40 09:12:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:27 Set channel filter=0.000000e+000 result=40 09:12:27 Config A/D Result=40 09:12:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:27 Get A/D filter: -9.255963e+061 result=40 09:12:27 Get A/D value=-858993460 result=40 09:12:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:12:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:12:27 Aux= 09:12:27 Message to Camera, serial 118945 queued 09:12:36 Received message from Master: op=Shutter serial=118955 09:12:36 Shutter LASER close 09:12:37 Received message from Master: op=PointingHead serial=118959 09:12:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:12:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:12:37 Point started: ret=0 09:12:37 point_skyscan result=0 09:12:38 Check angles 09:12:38 SkyScan query 09:12:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 09:12:38 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 09:12:38 Check angles 09:12:38 SkyScan query 09:12:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.31<-20154 Statuses=0008 0009 09:12:39 Msec=750 True Az=112.995 Ze=-122.31 Az status=0008 Ze status=0009 09:12:39 Check angles 09:12:39 SkyScan query 09:12:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.37<-18758 Statuses=0008 0009 09:12:40 Msec=1500 True Az=112.995 Ze=-101.37 Az status=0008 Ze status=0009 09:12:40 Check angles 09:12:40 SkyScan query 09:12:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.935<-17329 Statuses=0008 0009 09:12:40 Msec=2250 True Az=112.995 Ze=-79.935 Az status=0008 Ze status=0009 09:12:41 Check angles 09:12:41 SkyScan query 09:12:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.98<-15932 Statuses=0008 0009 09:12:41 Msec=3000 True Az=112.995 Ze=-58.98 Az status=0008 Ze status=0009 09:12:41 Check angles 09:12:41 SkyScan query 09:12:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.95<-14530 Statuses=0008 0009 09:12:42 Msec=3750 True Az=112.995 Ze=-37.95 Az status=0008 Ze status=0009 09:12:42 Check angles 09:12:42 SkyScan query 09:12:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.025<-13135 Statuses=0008 0009 09:12:43 Msec=4500 True Az=112.995 Ze=-17.025 Az status=0008 Ze status=0009 09:12:43 Check angles 09:12:43 SkyScan query 09:12:43 SkyScan query done: ret=0 az=112.995<-7533 ze=3.93<-11738 Statuses=0008 0009 09:12:43 Msec=5250 True Az=112.995 Ze=3.93 Az status=0008 Ze status=0009 09:12:44 Check angles 09:12:44 SkyScan query 09:12:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:12:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:12:44 Message to Master queued w/err=0: serial=118959 error=0 09:12:49 Received message from Master: op=Filter serial=118960 09:12:49 Color wheel filter change from 0 to 0 09:12:49 FLIGetFilterPos err=0 currentPosition=0 09:12:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:12:49 Filter is already there-color wheel unchanged 09:12:49 Received message from Master: op=Shutter serial=118961 09:12:49 Shutter LASER close 09:12:50 Received message from Camera: op=State serial=118963 09:12:50 GetSingleValue result=40 Value=cccccccc 09:12:50 SkyScan query 09:12:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:12:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:50 Parameters OK 09:12:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:50 Set A/D data flow result=40 09:12:50 Set A/D channel type result=40 09:12:50 Set A/D encoding result=40 09:12:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:50 Set channel filter=0.000000e+000 result=40 09:12:50 Config A/D Result=40 09:12:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:50 Get A/D filter: -9.255963e+061 result=40 09:12:50 Get A/D value=-858993460 result=40 09:12:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:50 Parameters OK 09:12:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:50 Set A/D data flow result=40 09:12:50 Set A/D channel type result=40 09:12:50 Set A/D encoding result=40 09:12:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:50 Set channel filter=0.000000e+000 result=40 09:12:50 Config A/D Result=40 09:12:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:50 Get A/D filter: -9.255963e+061 result=40 09:12:50 Get A/D value=-858993460 result=40 09:12:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:12:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:12:50 Aux= 09:12:50 Message to Camera, serial 118963 queued 09:13:27 Received message from Master: op=PointingHead serial=118976 09:13:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:13:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:13:27 Point started: ret=0 09:13:27 point_skyscan result=0 09:13:28 Check angles 09:13:28 SkyScan query 09:13:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:13:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:13:29 Message to Master queued w/err=0: serial=118976 error=0 09:13:34 Received message from Master: op=Filter serial=118977 09:13:34 Color wheel filter change from 0 to 0 09:13:34 FLIGetFilterPos err=0 currentPosition=0 09:13:34 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:34 Filter is already there-color wheel unchanged 09:13:34 Received message from Master: op=Shutter serial=118978 09:13:34 Shutter LASER close 09:13:34 Received message from Camera: op=State serial=118980 09:13:34 GetSingleValue result=40 Value=cccccccc 09:13:34 SkyScan query 09:13:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:13:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:34 Parameters OK 09:13:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:34 Set A/D data flow result=40 09:13:34 Set A/D channel type result=40 09:13:34 Set A/D encoding result=40 09:13:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:34 Set channel filter=0.000000e+000 result=40 09:13:34 Config A/D Result=40 09:13:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:34 Get A/D filter: -9.255963e+061 result=40 09:13:34 Get A/D value=-858993460 result=40 09:13:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:34 Parameters OK 09:13:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:34 Set A/D data flow result=40 09:13:34 Set A/D channel type result=40 09:13:34 Set A/D encoding result=40 09:13:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:34 Set channel filter=0.000000e+000 result=40 09:13:34 Config A/D Result=40 09:13:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:34 Get A/D filter: -9.255963e+061 result=40 09:13:34 Get A/D value=-858993460 result=40 09:13:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:34 Aux= 09:13:34 Message to Camera, serial 118980 queued 09:14:11 Received message from Master: op=PointingHead serial=118993 09:14:11 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:14:11 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:14:12 Point started: ret=0 09:14:12 point_skyscan result=0 09:14:12 Check angles 09:14:12 SkyScan query 09:14:13 SkyScan query done: ret=0 az=136.155<-9077 ze=-6.51<-12434 Statuses=0009 0008 09:14:13 Msec=0 True Az=136.155 Ze=-6.51 Az status=0009 Ze status=0008 09:14:13 Check angles 09:14:13 SkyScan query 09:14:14 SkyScan query done: ret=0 az=153.96<-10264 ze=-6.495<-12433 Statuses=0009 0008 09:14:14 Msec=750 True Az=153.96 Ze=-6.495 Az status=0009 Ze status=0008 09:14:14 Check angles 09:14:14 SkyScan query 09:14:14 SkyScan query done: ret=0 az=171.405<-11427 ze=-6.495<-12433 Statuses=0009 0008 09:14:14 Msec=1500 True Az=171.405 Ze=-6.495 Az status=0009 Ze status=0008 [UTC 2019-3-5 09:14:15] 09:14:15 Check angles 09:14:15 SkyScan query 09:14:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:14:15 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:14:15 Message to Master queued w/err=0: serial=118993 error=0 09:14:20 Received message from Master: op=Filter serial=118994 09:14:20 Color wheel filter change from 0 to 0 09:14:20 FLIGetFilterPos err=0 currentPosition=0 09:14:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:14:20 Filter is already there-color wheel unchanged 09:14:20 Received message from Master: op=Shutter serial=118995 09:14:20 Shutter LASER close 09:14:21 Received message from Camera: op=State serial=118997 09:14:21 GetSingleValue result=40 Value=cccccccc 09:14:21 SkyScan query 09:14:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:14:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:21 Parameters OK 09:14:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:21 Set A/D data flow result=40 09:14:21 Set A/D channel type result=40 09:14:21 Set A/D encoding result=40 09:14:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:21 Set channel filter=0.000000e+000 result=40 09:14:21 Config A/D Result=40 09:14:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:21 Get A/D filter: -9.255963e+061 result=40 09:14:21 Get A/D value=-858993460 result=40 09:14:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:21 Parameters OK 09:14:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:21 Set A/D data flow result=40 09:14:21 Set A/D channel type result=40 09:14:21 Set A/D encoding result=40 09:14:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:21 Set channel filter=0.000000e+000 result=40 09:14:21 Config A/D Result=40 09:14:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:21 Get A/D filter: -9.255963e+061 result=40 09:14:21 Get A/D value=-858993460 result=40 09:14:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:14:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:14:21 Aux= 09:14:21 Message to Camera, serial 118997 queued 09:14:58 Received message from Master: op=PointingHead serial=119010 09:14:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:14:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:14:58 Point started: ret=0 09:14:58 point_skyscan result=0 09:14:59 Check angles 09:14:59 SkyScan query 09:15:00 SkyScan query done: ret=0 az=153.27<-10218 ze=6.51<-11566 Statuses=0009 0008 09:15:00 Msec=0 True Az=153.27 Ze=6.51 Az status=0009 Ze status=0008 09:15:00 Check angles 09:15:00 SkyScan query 09:15:00 SkyScan query done: ret=0 az=135.75<-9050 ze=6.495<-11567 Statuses=0009 0008 09:15:00 Msec=750 True Az=135.75 Ze=6.495 Az status=0009 Ze status=0008 09:15:01 Check angles 09:15:01 SkyScan query 09:15:01 SkyScan query done: ret=0 az=118.275<-7885 ze=6.495<-11567 Statuses=0009 0008 09:15:01 Msec=1500 True Az=118.275 Ze=6.495 Az status=0009 Ze status=0008 09:15:01 Check angles 09:15:01 SkyScan query 09:15:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:15:02 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:15:02 Message to Master queued w/err=0: serial=119010 error=0 09:15:07 Received message from Master: op=Filter serial=119011 09:15:07 Color wheel filter change from 0 to 0 09:15:07 FLIGetFilterPos err=0 currentPosition=0 09:15:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:15:07 Filter is already there-color wheel unchanged 09:15:07 Received message from Master: op=Shutter serial=119012 09:15:07 Shutter LASER close 09:15:07 Received message from Camera: op=State serial=119014 09:15:07 GetSingleValue result=40 Value=cccccccc 09:15:07 SkyScan query 09:15:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:15:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:08 Parameters OK 09:15:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:08 Set A/D data flow result=40 09:15:08 Set A/D channel type result=40 09:15:08 Set A/D encoding result=40 09:15:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:08 Set channel filter=0.000000e+000 result=40 09:15:08 Config A/D Result=40 09:15:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:08 Get A/D filter: -9.255963e+061 result=40 09:15:08 Get A/D value=-858993460 result=40 09:15:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:08 Parameters OK 09:15:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:08 Set A/D data flow result=40 09:15:08 Set A/D channel type result=40 09:15:08 Set A/D encoding result=40 09:15:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:08 Set channel filter=0.000000e+000 result=40 09:15:08 Config A/D Result=40 09:15:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:08 Get A/D filter: -9.255963e+061 result=40 09:15:08 Get A/D value=-858993460 result=40 09:15:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:15:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:15:08 Aux= 09:15:08 Message to Camera, serial 119014 queued 09:15:44 Received message from Master: op=PointingHead serial=119027 09:15:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:15:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:15:45 Point started: ret=0 09:15:45 point_skyscan result=0 09:15:46 Check angles 09:15:46 SkyScan query 09:15:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 09:15:46 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 09:15:46 Check angles 09:15:46 SkyScan query 09:15:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 09:15:47 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 09:15:47 Check angles 09:15:47 SkyScan query 09:15:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.835<-16389 Statuses=0008 0009 09:15:48 Msec=1500 True Az=112.995 Ze=-65.835 Az status=0008 Ze status=0009 09:15:48 Check angles 09:15:48 SkyScan query 09:15:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.79<-17786 Statuses=0008 0009 09:15:48 Msec=2250 True Az=112.995 Ze=-86.79 Az status=0008 Ze status=0009 09:15:49 Check angles 09:15:49 SkyScan query 09:15:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.775<-19185 Statuses=0008 0009 09:15:49 Msec=3000 True Az=112.995 Ze=-107.775 Az status=0008 Ze status=0009 09:15:49 Check angles 09:15:49 SkyScan query 09:15:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.18<-20612 Statuses=0008 0009 09:15:50 Msec=3750 True Az=112.995 Ze=-129.18 Az status=0008 Ze status=0009 09:15:50 Check angles 09:15:50 SkyScan query 09:15:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.135<-22009 Statuses=0008 0009 09:15:51 Msec=4500 True Az=112.995 Ze=-150.135 Az status=0008 Ze status=0009 09:15:51 Check angles 09:15:51 SkyScan query 09:15:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.97<-23398 Statuses=0008 0009 09:15:51 Msec=5250 True Az=112.995 Ze=-170.97 Az status=0008 Ze status=0009 09:15:52 Check angles 09:15:52 SkyScan query 09:15:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:15:52 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:15:52 Message to Master queued w/err=0: serial=119027 error=0 09:15:57 Received message from Master: op=Filter serial=119028 09:15:57 Color wheel filter change from 0 to 0 09:15:57 FLIGetFilterPos err=0 currentPosition=0 09:15:57 FLIGetStepsRemaining err=0 RemainingSteps=0 09:15:57 Filter is already there-color wheel unchanged 09:15:57 Received message from Master: op=Shutter serial=119029 09:15:57 Shutter LASER open 09:15:58 Received message from Camera: op=State serial=119031 09:15:58 GetSingleValue result=40 Value=cccccccc 09:15:58 SkyScan query 09:15:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:15:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:58 Parameters OK 09:15:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:58 Set A/D data flow result=40 09:15:58 Set A/D channel type result=40 09:15:58 Set A/D encoding result=40 09:15:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:58 Set channel filter=0.000000e+000 result=40 09:15:58 Config A/D Result=40 09:15:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:58 Get A/D filter: -9.255963e+061 result=40 09:15:58 Get A/D value=-858993460 result=40 09:15:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:58 Parameters OK 09:15:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:58 Set A/D data flow result=40 09:15:58 Set A/D channel type result=40 09:15:58 Set A/D encoding result=40 09:15:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:58 Set channel filter=0.000000e+000 result=40 09:15:58 Config A/D Result=40 09:15:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:58 Get A/D filter: -9.255963e+061 result=40 09:15:58 Get A/D value=-858993460 result=40 09:15:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:15:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:15:58 Aux= 09:15:58 Message to Camera, serial 119031 queued 09:16:07 Received message from Master: op=Shutter serial=119041 09:16:07 Shutter LASER close 09:16:07 Received message from Master: op=PointingHead serial=119045 09:16:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:16:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:16:07 Point started: ret=0 09:16:07 point_skyscan result=0 09:16:08 Check angles 09:16:08 SkyScan query 09:16:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 09:16:09 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 09:16:09 Check angles 09:16:09 SkyScan query 09:16:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.175<-20145 Statuses=0008 0009 09:16:09 Msec=750 True Az=112.995 Ze=-122.175 Az status=0008 Ze status=0009 09:16:10 Check angles 09:16:10 SkyScan query 09:16:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.235<-18749 Statuses=0008 0009 09:16:10 Msec=1500 True Az=112.995 Ze=-101.235 Az status=0008 Ze status=0009 09:16:10 Check angles 09:16:10 SkyScan query 09:16:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.28<-17352 Statuses=0008 0009 09:16:11 Msec=2250 True Az=112.995 Ze=-80.28 Az status=0008 Ze status=0009 09:16:11 Check angles 09:16:11 SkyScan query 09:16:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.325<-15955 Statuses=0008 0009 09:16:12 Msec=3000 True Az=112.995 Ze=-59.325 Az status=0008 Ze status=0009 09:16:12 Check angles 09:16:12 SkyScan query 09:16:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.31<-14554 Statuses=0008 0009 09:16:12 Msec=3750 True Az=112.995 Ze=-38.31 Az status=0008 Ze status=0009 09:16:13 Check angles 09:16:13 SkyScan query 09:16:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.385<-13159 Statuses=0008 0009 09:16:13 Msec=4500 True Az=112.995 Ze=-17.385 Az status=0008 Ze status=0009 09:16:13 Check angles 09:16:13 SkyScan query 09:16:14 SkyScan query done: ret=0 az=112.995<-7533 ze=3.585<-11761 Statuses=0008 0009 09:16:14 Msec=5250 True Az=112.995 Ze=3.585 Az status=0008 Ze status=0009 09:16:14 Check angles 09:16:14 SkyScan query 09:16:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:16:15 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:16:15 Message to Master queued w/err=0: serial=119045 error=0 09:16:20 Received message from Master: op=Filter serial=119046 09:16:20 Color wheel filter change from 0 to 0 09:16:20 FLIGetFilterPos err=0 currentPosition=0 09:16:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:16:20 Filter is already there-color wheel unchanged 09:16:20 Received message from Master: op=Shutter serial=119047 09:16:20 Shutter LASER close 09:16:20 Received message from Camera: op=State serial=119049 09:16:20 GetSingleValue result=40 Value=cccccccc 09:16:20 SkyScan query 09:16:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:16:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:21 Parameters OK 09:16:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:21 Set A/D data flow result=40 09:16:21 Set A/D channel type result=40 09:16:21 Set A/D encoding result=40 09:16:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:21 Set channel filter=0.000000e+000 result=40 09:16:21 Config A/D Result=40 09:16:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:21 Get A/D filter: -9.255963e+061 result=40 09:16:21 Get A/D value=-858993460 result=40 09:16:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:21 Parameters OK 09:16:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:21 Set A/D data flow result=40 09:16:21 Set A/D channel type result=40 09:16:21 Set A/D encoding result=40 09:16:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:21 Set channel filter=0.000000e+000 result=40 09:16:21 Config A/D Result=40 09:16:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:21 Get A/D filter: -9.255963e+061 result=40 09:16:21 Get A/D value=-858993460 result=40 09:16:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:16:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:16:21 Aux= 09:16:21 Message to Camera, serial 119049 queued 09:16:57 Received message from Master: op=PointingHead serial=119062 09:16:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:16:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:16:58 Point started: ret=0 09:16:58 point_skyscan result=0 09:16:59 Check angles 09:16:59 SkyScan query 09:16:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:16:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:16:59 Message to Master queued w/err=0: serial=119062 error=0 09:17:04 Received message from Master: op=Filter serial=119063 09:17:04 Color wheel filter change from 0 to 0 09:17:04 FLIGetFilterPos err=0 currentPosition=0 09:17:04 FLIGetStepsRemaining err=0 RemainingSteps=0 09:17:04 Filter is already there-color wheel unchanged 09:17:04 Received message from Master: op=Shutter serial=119064 09:17:04 Shutter LASER close 09:17:04 Received message from Camera: op=State serial=119066 09:17:04 GetSingleValue result=40 Value=cccccccc 09:17:04 SkyScan query 09:17:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:17:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:05 Parameters OK 09:17:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:05 Set A/D data flow result=40 09:17:05 Set A/D channel type result=40 09:17:05 Set A/D encoding result=40 09:17:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:05 Set channel filter=0.000000e+000 result=40 09:17:05 Config A/D Result=40 09:17:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:05 Get A/D filter: -9.255963e+061 result=40 09:17:05 Get A/D value=-858993460 result=40 09:17:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:05 Parameters OK 09:17:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:05 Set A/D data flow result=40 09:17:05 Set A/D channel type result=40 09:17:05 Set A/D encoding result=40 09:17:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:05 Set channel filter=0.000000e+000 result=40 09:17:05 Config A/D Result=40 09:17:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:05 Get A/D filter: -9.255963e+061 result=40 09:17:05 Get A/D value=-858993460 result=40 09:17:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:17:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:17:05 Aux= 09:17:05 Message to Camera, serial 119066 queued 09:17:42 Received message from Master: op=PointingHead serial=119079 09:17:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:17:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:17:42 Point started: ret=0 09:17:42 point_skyscan result=0 09:17:43 Check angles 09:17:43 SkyScan query 09:17:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:17:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:17:43 Message to Master queued w/err=0: serial=119079 error=0 09:17:48 Received message from Master: op=Filter serial=119080 09:17:48 Color wheel filter change from 0 to 0 09:17:48 FLIGetFilterPos err=0 currentPosition=0 09:17:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:17:48 Filter is already there-color wheel unchanged 09:17:49 Received message from Master: op=Shutter serial=119081 09:17:49 Shutter LASER close 09:17:49 Received message from Camera: op=State serial=119083 09:17:49 GetSingleValue result=40 Value=cccccccc 09:17:49 SkyScan query 09:17:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:17:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:49 Parameters OK 09:17:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:49 Set A/D data flow result=40 09:17:49 Set A/D channel type result=40 09:17:49 Set A/D encoding result=40 09:17:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:49 Set channel filter=0.000000e+000 result=40 09:17:49 Config A/D Result=40 09:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:49 Get A/D filter: -9.255963e+061 result=40 09:17:49 Get A/D value=-858993460 result=40 09:17:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:49 Parameters OK 09:17:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:49 Set A/D data flow result=40 09:17:49 Set A/D channel type result=40 09:17:49 Set A/D encoding result=40 09:17:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:49 Set channel filter=0.000000e+000 result=40 09:17:49 Config A/D Result=40 09:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:49 Get A/D filter: -9.255963e+061 result=40 09:17:49 Get A/D value=-858993460 result=40 09:17:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:17:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:17:49 Aux= 09:17:49 Message to Camera, serial 119083 queued 09:18:26 Received message from Master: op=PointingHead serial=119096 09:18:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:18:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:18:26 Point started: ret=0 09:18:26 point_skyscan result=0 09:18:27 Check angles 09:18:27 SkyScan query 09:18:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:18:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:18:28 Message to Master queued w/err=0: serial=119096 error=0 09:18:33 Received message from Master: op=Filter serial=119097 09:18:33 Color wheel filter change from 0 to 0 09:18:33 FLIGetFilterPos err=0 currentPosition=0 09:18:33 FLIGetStepsRemaining err=0 RemainingSteps=0 09:18:33 Filter is already there-color wheel unchanged 09:18:33 Received message from Master: op=Shutter serial=119098 09:18:33 Shutter LASER close 09:18:33 Received message from Camera: op=State serial=119100 09:18:33 GetSingleValue result=40 Value=cccccccc 09:18:33 SkyScan query 09:18:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:18:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:33 Parameters OK 09:18:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:33 Set A/D data flow result=40 09:18:33 Set A/D channel type result=40 09:18:33 Set A/D encoding result=40 09:18:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:33 Set channel filter=0.000000e+000 result=40 09:18:33 Config A/D Result=40 09:18:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:33 Get A/D filter: -9.255963e+061 result=40 09:18:33 Get A/D value=-858993460 result=40 09:18:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:33 Parameters OK 09:18:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:33 Set A/D data flow result=40 09:18:33 Set A/D channel type result=40 09:18:33 Set A/D encoding result=40 09:18:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:33 Set channel filter=0.000000e+000 result=40 09:18:33 Config A/D Result=40 09:18:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:33 Get A/D filter: -9.255963e+061 result=40 09:18:33 Get A/D value=-858993460 result=40 09:18:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:18:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:18:33 Aux= 09:18:33 Message to Camera, serial 119100 queued 09:19:10 Received message from Master: op=PointingHead serial=119113 09:19:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:19:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:19:11 Point started: ret=0 09:19:11 point_skyscan result=0 09:19:11 Check angles 09:19:11 SkyScan query 09:19:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 09:19:12 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 09:19:12 Check angles 09:19:12 SkyScan query 09:19:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.07<-14938 Statuses=0008 0009 09:19:13 Msec=750 True Az=112.995 Ze=-44.07 Az status=0008 Ze status=0009 09:19:13 Check angles 09:19:13 SkyScan query 09:19:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.995<-16333 Statuses=0008 0009 09:19:13 Msec=1500 True Az=112.995 Ze=-64.995 Az status=0008 Ze status=0009 09:19:14 Check angles 09:19:14 SkyScan query 09:19:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 09:19:14 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 09:19:14 Check angles 09:19:14 SkyScan query 09:19:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.73<-19182 Statuses=0008 0009 09:19:15 Msec=3000 True Az=112.995 Ze=-107.73 Az status=0008 Ze status=0009 09:19:15 Check angles 09:19:15 SkyScan query 09:19:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.685<-20579 Statuses=0008 0009 09:19:16 Msec=3750 True Az=112.995 Ze=-128.685 Az status=0008 Ze status=0009 09:19:16 Check angles 09:19:16 SkyScan query 09:19:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.67<-21978 Statuses=0008 0009 09:19:16 Msec=4500 True Az=112.995 Ze=-149.67 Az status=0008 Ze status=0009 09:19:17 Check angles 09:19:17 SkyScan query 09:19:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.595<-23373 Statuses=0008 0009 09:19:17 Msec=5250 True Az=112.995 Ze=-170.595 Az status=0008 Ze status=0009 09:19:17 Check angles 09:19:17 SkyScan query 09:19:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:19:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:19:18 Message to Master queued w/err=0: serial=119113 error=0 09:19:23 Received message from Master: op=Filter serial=119114 09:19:23 Color wheel filter change from 0 to 0 09:19:23 FLIGetFilterPos err=0 currentPosition=0 09:19:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:19:23 Filter is already there-color wheel unchanged 09:19:23 Received message from Master: op=Shutter serial=119115 09:19:23 Shutter LASER open 09:19:23 Received message from Camera: op=State serial=119117 09:19:23 GetSingleValue result=40 Value=cccccccc 09:19:23 SkyScan query 09:19:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:19:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:24 Parameters OK 09:19:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:24 Set A/D data flow result=40 09:19:24 Set A/D channel type result=40 09:19:24 Set A/D encoding result=40 09:19:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:24 Set channel filter=0.000000e+000 result=40 09:19:24 Config A/D Result=40 09:19:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:24 Get A/D filter: -9.255963e+061 result=40 09:19:24 Get A/D value=-858993460 result=40 09:19:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:24 Parameters OK 09:19:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:24 Set A/D data flow result=40 09:19:24 Set A/D channel type result=40 09:19:24 Set A/D encoding result=40 09:19:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:24 Set channel filter=0.000000e+000 result=40 09:19:24 Config A/D Result=40 09:19:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:24 Get A/D filter: -9.255963e+061 result=40 09:19:24 Get A/D value=-858993460 result=40 09:19:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:19:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:19:24 Aux= 09:19:24 Message to Camera, serial 119117 queued 09:19:32 Received message from Master: op=Shutter serial=119127 09:19:32 Shutter LASER close 09:19:33 Received message from Master: op=PointingHead serial=119131 09:19:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:19:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:19:33 Point started: ret=0 09:19:33 point_skyscan result=0 09:19:34 Check angles 09:19:34 SkyScan query 09:19:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.935<-21529 Statuses=0008 0009 09:19:35 Msec=0 True Az=112.995 Ze=-142.935 Az status=0008 Ze status=0009 09:19:35 Check angles 09:19:35 SkyScan query 09:19:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.935<-20129 Statuses=0008 0009 09:19:35 Msec=750 True Az=112.995 Ze=-121.935 Az status=0008 Ze status=0009 09:19:36 Check angles 09:19:36 SkyScan query 09:19:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.01<-18734 Statuses=0008 0009 09:19:36 Msec=1500 True Az=112.995 Ze=-101.01 Az status=0008 Ze status=0009 09:19:36 Check angles 09:19:36 SkyScan query 09:19:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.04<-17336 Statuses=0008 0009 09:19:37 Msec=2250 True Az=112.995 Ze=-80.04 Az status=0008 Ze status=0009 09:19:37 Check angles 09:19:37 SkyScan query 09:19:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.1<-15940 Statuses=0008 0009 09:19:38 Msec=3000 True Az=112.995 Ze=-59.1 Az status=0008 Ze status=0009 09:19:38 Check angles 09:19:38 SkyScan query 09:19:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.07<-14538 Statuses=0008 0009 09:19:38 Msec=3750 True Az=112.995 Ze=-38.07 Az status=0008 Ze status=0009 09:19:39 Check angles 09:19:39 SkyScan query 09:19:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.13<-13142 Statuses=0008 0009 09:19:39 Msec=4500 True Az=112.995 Ze=-17.13 Az status=0008 Ze status=0009 09:19:39 Check angles 09:19:39 SkyScan query 09:19:40 SkyScan query done: ret=0 az=113.01<-7534 ze=4.23<-11718 Statuses=0008 0009 09:19:40 Msec=5250 True Az=113.01 Ze=4.23 Az status=0008 Ze status=0009 09:19:40 Check angles 09:19:40 SkyScan query 09:19:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:19:41 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:19:41 Message to Master queued w/err=0: serial=119131 error=0 09:19:46 Received message from Master: op=Filter serial=119132 09:19:46 Color wheel filter change from 0 to 0 09:19:46 FLIGetFilterPos err=0 currentPosition=0 09:19:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:19:46 Filter is already there-color wheel unchanged 09:19:46 Received message from Master: op=Shutter serial=119133 09:19:46 Shutter LASER close 09:19:46 Received message from Camera: op=State serial=119135 09:19:46 GetSingleValue result=40 Value=cccccccc 09:19:46 SkyScan query 09:19:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:19:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:47 Parameters OK 09:19:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:47 Set A/D data flow result=40 09:19:47 Set A/D channel type result=40 09:19:47 Set A/D encoding result=40 09:19:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:47 Set channel filter=0.000000e+000 result=40 09:19:47 Config A/D Result=40 09:19:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:47 Get A/D filter: -9.255963e+061 result=40 09:19:47 Get A/D value=-858993460 result=40 09:19:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:47 Parameters OK 09:19:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:47 Set A/D data flow result=40 09:19:47 Set A/D channel type result=40 09:19:47 Set A/D encoding result=40 09:19:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:47 Set channel filter=0.000000e+000 result=40 09:19:47 Config A/D Result=40 09:19:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:47 Get A/D filter: -9.255963e+061 result=40 09:19:47 Get A/D value=-858993460 result=40 09:19:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:19:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:19:47 Aux= 09:19:47 Message to Camera, serial 119135 queued 09:20:23 Received message from Master: op=PointingHead serial=119148 09:20:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:20:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:20:24 Point started: ret=0 09:20:24 point_skyscan result=0 09:20:25 Check angles 09:20:25 SkyScan query 09:20:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:20:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:20:25 Message to Master queued w/err=0: serial=119148 error=0 09:20:30 Received message from Master: op=Filter serial=119149 09:20:30 Color wheel filter change from 0 to 0 09:20:30 FLIGetFilterPos err=0 currentPosition=0 09:20:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:30 Filter is already there-color wheel unchanged 09:20:30 Received message from Master: op=Shutter serial=119150 09:20:30 Shutter LASER close 09:20:30 Received message from Camera: op=State serial=119152 09:20:30 GetSingleValue result=40 Value=cccccccc 09:20:30 SkyScan query 09:20:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:20:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:31 Parameters OK 09:20:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:31 Set A/D data flow result=40 09:20:31 Set A/D channel type result=40 09:20:31 Set A/D encoding result=40 09:20:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:31 Set channel filter=0.000000e+000 result=40 09:20:31 Config A/D Result=40 09:20:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:31 Get A/D filter: -9.255963e+061 result=40 09:20:31 Get A/D value=-858993460 result=40 09:20:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:31 Parameters OK 09:20:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:31 Set A/D data flow result=40 09:20:31 Set A/D channel type result=40 09:20:31 Set A/D encoding result=40 09:20:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:31 Set channel filter=0.000000e+000 result=40 09:20:31 Config A/D Result=40 09:20:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:31 Get A/D filter: -9.255963e+061 result=40 09:20:31 Get A/D value=-858993460 result=40 09:20:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:31 Aux= 09:20:31 Message to Camera, serial 119152 queued 09:21:08 Received message from Master: op=PointingHead serial=119165 09:21:08 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:21:08 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:21:08 Point started: ret=0 09:21:08 point_skyscan result=0 09:21:09 Check angles 09:21:09 SkyScan query 09:21:09 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 09:21:09 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 09:21:10 Check angles 09:21:10 SkyScan query 09:21:10 SkyScan query done: ret=0 az=154.11<-10274 ze=-6.495<-12433 Statuses=0009 0008 09:21:10 Msec=750 True Az=154.11 Ze=-6.495 Az status=0009 Ze status=0008 09:21:10 Check angles 09:21:10 SkyScan query 09:21:11 SkyScan query done: ret=0 az=171.51<-11434 ze=-6.495<-12433 Statuses=0009 0008 09:21:11 Msec=1500 True Az=171.51 Ze=-6.495 Az status=0009 Ze status=0008 09:21:11 Check angles 09:21:11 SkyScan query 09:21:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:21:12 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:21:12 Message to Master queued w/err=0: serial=119165 error=0 09:21:17 Received message from Master: op=Filter serial=119166 09:21:17 Color wheel filter change from 0 to 0 09:21:17 FLIGetFilterPos err=0 currentPosition=0 09:21:17 FLIGetStepsRemaining err=0 RemainingSteps=0 09:21:17 Filter is already there-color wheel unchanged 09:21:17 Received message from Master: op=Shutter serial=119167 09:21:17 Shutter LASER close 09:21:17 Received message from Camera: op=State serial=119169 09:21:17 GetSingleValue result=40 Value=cccccccc 09:21:17 SkyScan query 09:21:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:21:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:17 Parameters OK 09:21:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:17 Set A/D data flow result=40 09:21:17 Set A/D channel type result=40 09:21:17 Set A/D encoding result=40 09:21:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:17 Set channel filter=0.000000e+000 result=40 09:21:17 Config A/D Result=40 09:21:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:17 Get A/D filter: -9.255963e+061 result=40 09:21:17 Get A/D value=-858993460 result=40 09:21:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:17 Parameters OK 09:21:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:17 Set A/D data flow result=40 09:21:17 Set A/D channel type result=40 09:21:17 Set A/D encoding result=40 09:21:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:17 Set channel filter=0.000000e+000 result=40 09:21:17 Config A/D Result=40 09:21:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:17 Get A/D filter: -9.255963e+061 result=40 09:21:17 Get A/D value=-858993460 result=40 09:21:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:21:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:21:17 Aux= 09:21:17 Message to Camera, serial 119169 queued 09:21:54 Received message from Master: op=PointingHead serial=119182 09:21:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:21:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:21:55 Point started: ret=0 09:21:55 point_skyscan result=0 09:21:55 Check angles 09:21:55 SkyScan query 09:21:56 SkyScan query done: ret=0 az=152.85<-10190 ze=6.51<-11566 Statuses=0009 0008 09:21:56 Msec=0 True Az=152.85 Ze=6.51 Az status=0009 Ze status=0008 09:21:56 Check angles 09:21:56 SkyScan query 09:21:57 SkyScan query done: ret=0 az=135.495<-9033 ze=6.495<-11567 Statuses=0009 0008 09:21:57 Msec=750 True Az=135.495 Ze=6.495 Az status=0009 Ze status=0008 09:21:57 Check angles 09:21:57 SkyScan query 09:21:57 SkyScan query done: ret=0 az=118.02<-7868 ze=6.495<-11567 Statuses=0009 0008 09:21:57 Msec=1500 True Az=118.02 Ze=6.495 Az status=0009 Ze status=0008 09:21:58 Check angles 09:21:58 SkyScan query 09:21:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:21:58 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:21:58 Message to Master queued w/err=0: serial=119182 error=0 09:22:03 Received message from Master: op=Filter serial=119183 09:22:03 Color wheel filter change from 0 to 0 09:22:03 FLIGetFilterPos err=0 currentPosition=0 09:22:03 FLIGetStepsRemaining err=0 RemainingSteps=0 09:22:03 Filter is already there-color wheel unchanged 09:22:03 Received message from Master: op=Shutter serial=119184 09:22:03 Shutter LASER close 09:22:03 Received message from Camera: op=State serial=119186 09:22:03 GetSingleValue result=40 Value=cccccccc 09:22:03 SkyScan query 09:22:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:22:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:04 Parameters OK 09:22:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:04 Set A/D data flow result=40 09:22:04 Set A/D channel type result=40 09:22:04 Set A/D encoding result=40 09:22:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:04 Set channel filter=0.000000e+000 result=40 09:22:04 Config A/D Result=40 09:22:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:04 Get A/D filter: -9.255963e+061 result=40 09:22:04 Get A/D value=-858993460 result=40 09:22:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:04 Parameters OK 09:22:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:04 Set A/D data flow result=40 09:22:04 Set A/D channel type result=40 09:22:04 Set A/D encoding result=40 09:22:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:04 Set channel filter=0.000000e+000 result=40 09:22:04 Config A/D Result=40 09:22:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:04 Get A/D filter: -9.255963e+061 result=40 09:22:04 Get A/D value=-858993460 result=40 09:22:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:04 Aux= 09:22:04 Message to Camera, serial 119186 queued 09:22:41 Received message from Master: op=PointingHead serial=119199 09:22:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:22:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:22:41 Point started: ret=0 09:22:41 point_skyscan result=0 09:22:42 Check angles 09:22:42 SkyScan query 09:22:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.445<-13563 Statuses=0008 0009 09:22:42 Msec=0 True Az=112.995 Ze=-23.445 Az status=0008 Ze status=0009 09:22:43 Check angles 09:22:43 SkyScan query 09:22:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 09:22:43 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 09:22:43 Check angles 09:22:43 SkyScan query 09:22:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.76<-16384 Statuses=0008 0009 09:22:44 Msec=1500 True Az=112.995 Ze=-65.76 Az status=0008 Ze status=0009 09:22:44 Check angles 09:22:44 SkyScan query 09:22:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.82<-17788 Statuses=0008 0009 09:22:45 Msec=2250 True Az=112.995 Ze=-86.82 Az status=0008 Ze status=0009 09:22:45 Check angles 09:22:45 SkyScan query 09:22:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.7<-19180 Statuses=0008 0009 09:22:45 Msec=3000 True Az=112.995 Ze=-107.7 Az status=0008 Ze status=0009 09:22:46 Check angles 09:22:46 SkyScan query 09:22:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.625<-20575 Statuses=0008 0009 09:22:46 Msec=3750 True Az=112.995 Ze=-128.625 Az status=0008 Ze status=0009 09:22:46 Check angles 09:22:46 SkyScan query 09:22:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.625<-21975 Statuses=0008 0009 09:22:47 Msec=4500 True Az=112.995 Ze=-149.625 Az status=0008 Ze status=0009 09:22:47 Check angles 09:22:47 SkyScan query 09:22:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.565<-23371 Statuses=0008 0009 09:22:48 Msec=5250 True Az=112.995 Ze=-170.565 Az status=0008 Ze status=0009 09:22:48 Check angles 09:22:48 SkyScan query 09:22:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:22:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:22:48 Message to Master queued w/err=0: serial=119199 error=0 09:22:53 Received message from Master: op=Filter serial=119200 09:22:53 Color wheel filter change from 0 to 0 09:22:53 FLIGetFilterPos err=0 currentPosition=0 09:22:53 FLIGetStepsRemaining err=0 RemainingSteps=0 09:22:53 Filter is already there-color wheel unchanged 09:22:54 Received message from Master: op=Shutter serial=119201 09:22:54 Shutter LASER open 09:22:54 Received message from Camera: op=State serial=119203 09:22:54 GetSingleValue result=40 Value=cccccccc 09:22:54 SkyScan query 09:22:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:22:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:54 Parameters OK 09:22:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:54 Set A/D data flow result=40 09:22:54 Set A/D channel type result=40 09:22:54 Set A/D encoding result=40 09:22:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:54 Set channel filter=0.000000e+000 result=40 09:22:54 Config A/D Result=40 09:22:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:54 Get A/D filter: -9.255963e+061 result=40 09:22:54 Get A/D value=-858993460 result=40 09:22:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:54 Parameters OK 09:22:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:54 Set A/D data flow result=40 09:22:54 Set A/D channel type result=40 09:22:54 Set A/D encoding result=40 09:22:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:54 Set channel filter=0.000000e+000 result=40 09:22:54 Config A/D Result=40 09:22:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:54 Get A/D filter: -9.255963e+061 result=40 09:22:54 Get A/D value=-858993460 result=40 09:22:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:54 Aux= 09:22:54 Message to Camera, serial 119203 queued 09:23:03 Received message from Master: op=Shutter serial=119213 09:23:03 Shutter LASER close 09:23:03 Received message from Master: op=PointingHead serial=119217 09:23:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:23:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:23:04 Point started: ret=0 09:23:04 point_skyscan result=0 09:23:04 Check angles 09:23:04 SkyScan query 09:23:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 09:23:05 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 09:23:05 Check angles 09:23:05 SkyScan query 09:23:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.74<-20116 Statuses=0008 0009 09:23:06 Msec=750 True Az=112.995 Ze=-121.74 Az status=0008 Ze status=0009 09:23:06 Check angles 09:23:06 SkyScan query 09:23:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.935<-18729 Statuses=0008 0009 09:23:06 Msec=1500 True Az=112.995 Ze=-100.935 Az status=0008 Ze status=0009 09:23:07 Check angles 09:23:07 SkyScan query 09:23:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.47<-17298 Statuses=0008 0009 09:23:07 Msec=2250 True Az=112.995 Ze=-79.47 Az status=0008 Ze status=0009 09:23:07 Check angles 09:23:07 SkyScan query 09:23:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.53<-15902 Statuses=0008 0009 09:23:08 Msec=3000 True Az=112.995 Ze=-58.53 Az status=0008 Ze status=0009 09:23:08 Check angles 09:23:08 SkyScan query 09:23:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.2<-14480 Statuses=0008 0009 09:23:09 Msec=3750 True Az=112.995 Ze=-37.2 Az status=0008 Ze status=0009 09:23:09 Check angles 09:23:09 SkyScan query 09:23:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.215<-13081 Statuses=0008 0009 09:23:09 Msec=4500 True Az=112.995 Ze=-16.215 Az status=0008 Ze status=0009 09:23:10 Check angles 09:23:10 SkyScan query 09:23:10 SkyScan query done: ret=0 az=112.995<-7533 ze=4.575<-11695 Statuses=0008 0009 09:23:10 Msec=5250 True Az=112.995 Ze=4.575 Az status=0008 Ze status=0009 09:23:10 Check angles 09:23:10 SkyScan query 09:23:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:23:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:23:11 Message to Master queued w/err=0: serial=119217 error=0 09:23:16 Received message from Master: op=Filter serial=119218 09:23:16 Color wheel filter change from 0 to 0 09:23:16 FLIGetFilterPos err=0 currentPosition=0 09:23:16 FLIGetStepsRemaining err=0 RemainingSteps=0 09:23:16 Filter is already there-color wheel unchanged 09:23:16 Received message from Master: op=Shutter serial=119219 09:23:16 Shutter LASER close 09:23:16 Received message from Camera: op=State serial=119221 09:23:16 GetSingleValue result=40 Value=cccccccc 09:23:16 SkyScan query 09:23:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:23:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:17 Parameters OK 09:23:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:17 Set A/D data flow result=40 09:23:17 Set A/D channel type result=40 09:23:17 Set A/D encoding result=40 09:23:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:17 Set channel filter=0.000000e+000 result=40 09:23:17 Config A/D Result=40 09:23:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:17 Get A/D filter: -9.255963e+061 result=40 09:23:17 Get A/D value=-858993460 result=40 09:23:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:17 Parameters OK 09:23:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:17 Set A/D data flow result=40 09:23:17 Set A/D channel type result=40 09:23:17 Set A/D encoding result=40 09:23:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:17 Set channel filter=0.000000e+000 result=40 09:23:17 Config A/D Result=40 09:23:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:17 Get A/D filter: -9.255963e+061 result=40 09:23:17 Get A/D value=-858993460 result=40 09:23:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:23:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:23:17 Aux= 09:23:17 Message to Camera, serial 119221 queued [UTC 2019-3-5 09:23:50] 09:23:54 Received message from Master: op=PointingHead serial=119234 09:23:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:23:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:23:54 Point started: ret=0 09:23:54 point_skyscan result=0 09:23:55 Check angles 09:23:55 SkyScan query 09:23:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:23:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:23:56 Message to Master queued w/err=0: serial=119234 error=0 09:24:01 Received message from Master: op=Filter serial=119235 09:24:01 Color wheel filter change from 0 to 0 09:24:01 FLIGetFilterPos err=0 currentPosition=0 09:24:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:24:01 Filter is already there-color wheel unchanged 09:24:01 Received message from Master: op=Shutter serial=119236 09:24:01 Shutter LASER close 09:24:01 Received message from Camera: op=State serial=119238 09:24:01 GetSingleValue result=40 Value=cccccccc 09:24:01 SkyScan query 09:24:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:24:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:01 Parameters OK 09:24:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:01 Set A/D data flow result=40 09:24:01 Set A/D channel type result=40 09:24:01 Set A/D encoding result=40 09:24:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:01 Set channel filter=0.000000e+000 result=40 09:24:01 Config A/D Result=40 09:24:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:01 Get A/D filter: -9.255963e+061 result=40 09:24:01 Get A/D value=-858993460 result=40 09:24:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:01 Parameters OK 09:24:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:01 Set A/D data flow result=40 09:24:01 Set A/D channel type result=40 09:24:01 Set A/D encoding result=40 09:24:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:01 Set channel filter=0.000000e+000 result=40 09:24:01 Config A/D Result=40 09:24:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:01 Get A/D filter: -9.255963e+061 result=40 09:24:01 Get A/D value=-858993460 result=40 09:24:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:24:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:24:01 Aux= 09:24:01 Message to Camera, serial 119238 queued 09:24:38 Received message from Master: op=PointingHead serial=119251 09:24:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:24:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:24:39 Point started: ret=0 09:24:39 point_skyscan result=0 09:24:39 Check angles 09:24:39 SkyScan query 09:24:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:24:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:24:40 Message to Master queued w/err=0: serial=119251 error=0 09:24:45 Received message from Master: op=Filter serial=119252 09:24:45 Color wheel filter change from 0 to 0 09:24:45 FLIGetFilterPos err=0 currentPosition=0 09:24:45 FLIGetStepsRemaining err=0 RemainingSteps=0 09:24:45 Filter is already there-color wheel unchanged 09:24:45 Received message from Master: op=Shutter serial=119253 09:24:45 Shutter LASER close 09:24:45 Received message from Camera: op=State serial=119255 09:24:45 GetSingleValue result=40 Value=cccccccc 09:24:45 SkyScan query 09:24:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:24:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:46 Parameters OK 09:24:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:46 Set A/D data flow result=40 09:24:46 Set A/D channel type result=40 09:24:46 Set A/D encoding result=40 09:24:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:46 Set channel filter=0.000000e+000 result=40 09:24:46 Config A/D Result=40 09:24:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:46 Get A/D filter: -9.255963e+061 result=40 09:24:46 Get A/D value=-858993460 result=40 09:24:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:46 Parameters OK 09:24:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:46 Set A/D data flow result=40 09:24:46 Set A/D channel type result=40 09:24:46 Set A/D encoding result=40 09:24:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:46 Set channel filter=0.000000e+000 result=40 09:24:46 Config A/D Result=40 09:24:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:46 Get A/D filter: -9.255963e+061 result=40 09:24:46 Get A/D value=-858993460 result=40 09:24:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:24:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:24:46 Aux= 09:24:46 Message to Camera, serial 119255 queued 09:25:22 Received message from Master: op=PointingHead serial=119268 09:25:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:25:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:25:23 Point started: ret=0 09:25:23 point_skyscan result=0 09:25:24 Check angles 09:25:24 SkyScan query 09:25:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:25:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:25:24 Message to Master queued w/err=0: serial=119268 error=0 09:25:29 Received message from Master: op=Filter serial=119269 09:25:29 Color wheel filter change from 0 to 0 09:25:29 FLIGetFilterPos err=0 currentPosition=0 09:25:29 FLIGetStepsRemaining err=0 RemainingSteps=0 09:25:29 Filter is already there-color wheel unchanged 09:25:29 Received message from Master: op=Shutter serial=119270 09:25:29 Shutter LASER close 09:25:29 Received message from Camera: op=State serial=119272 09:25:29 GetSingleValue result=40 Value=cccccccc 09:25:29 SkyScan query 09:25:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:25:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:30 Parameters OK 09:25:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:30 Set A/D data flow result=40 09:25:30 Set A/D channel type result=40 09:25:30 Set A/D encoding result=40 09:25:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:30 Set channel filter=0.000000e+000 result=40 09:25:30 Config A/D Result=40 09:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:30 Get A/D filter: -9.255963e+061 result=40 09:25:30 Get A/D value=-858993460 result=40 09:25:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:30 Parameters OK 09:25:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:30 Set A/D data flow result=40 09:25:30 Set A/D channel type result=40 09:25:30 Set A/D encoding result=40 09:25:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:30 Set channel filter=0.000000e+000 result=40 09:25:30 Config A/D Result=40 09:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:30 Get A/D filter: -9.255963e+061 result=40 09:25:30 Get A/D value=-858993460 result=40 09:25:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:25:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:25:30 Aux= 09:25:30 Message to Camera, serial 119272 queued 09:26:07 Received message from Master: op=PointingHead serial=119285 09:26:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:26:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:26:07 Point started: ret=0 09:26:07 point_skyscan result=0 09:26:08 Check angles 09:26:08 SkyScan query 09:26:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 09:26:08 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 09:26:09 Check angles 09:26:09 SkyScan query 09:26:09 SkyScan query done: ret=0 az=112.98<-7532 ze=-44.415<-14961 Statuses=0008 0009 09:26:09 Msec=750 True Az=112.98 Ze=-44.415 Az status=0008 Ze status=0009 09:26:09 Check angles 09:26:09 SkyScan query 09:26:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.355<-16357 Statuses=0008 0009 09:26:10 Msec=1500 True Az=112.995 Ze=-65.355 Az status=0008 Ze status=0009 09:26:10 Check angles 09:26:10 SkyScan query 09:26:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.28<-17752 Statuses=0008 0009 09:26:11 Msec=2250 True Az=112.995 Ze=-86.28 Az status=0008 Ze status=0009 09:26:11 Check angles 09:26:11 SkyScan query 09:26:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.685<-19179 Statuses=0008 0009 09:26:12 Msec=3000 True Az=112.995 Ze=-107.685 Az status=0008 Ze status=0009 09:26:12 Check angles 09:26:12 SkyScan query 09:26:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.64<-20576 Statuses=0008 0009 09:26:12 Msec=3750 True Az=112.995 Ze=-128.64 Az status=0008 Ze status=0009 09:26:12 Check angles 09:26:12 SkyScan query 09:26:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.075<-22005 Statuses=0008 0009 09:26:13 Msec=4500 True Az=112.995 Ze=-150.075 Az status=0008 Ze status=0009 09:26:13 Check angles 09:26:13 SkyScan query 09:26:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.925<-23395 Statuses=0008 0009 09:26:14 Msec=5250 True Az=112.995 Ze=-170.925 Az status=0008 Ze status=0009 09:26:14 Check angles 09:26:14 SkyScan query 09:26:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:26:15 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:26:15 Message to Master queued w/err=0: serial=119285 error=0 09:26:20 Received message from Master: op=Filter serial=119286 09:26:20 Color wheel filter change from 0 to 0 09:26:20 FLIGetFilterPos err=0 currentPosition=0 09:26:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:26:20 Filter is already there-color wheel unchanged 09:26:20 Received message from Master: op=Shutter serial=119287 09:26:20 Shutter LASER open 09:26:20 Received message from Camera: op=State serial=119289 09:26:20 GetSingleValue result=40 Value=cccccccc 09:26:20 SkyScan query 09:26:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:26:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:20 Parameters OK 09:26:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:20 Set A/D data flow result=40 09:26:20 Set A/D channel type result=40 09:26:20 Set A/D encoding result=40 09:26:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:20 Set channel filter=0.000000e+000 result=40 09:26:20 Config A/D Result=40 09:26:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:20 Get A/D filter: -9.255963e+061 result=40 09:26:20 Get A/D value=-858993460 result=40 09:26:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:20 Parameters OK 09:26:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:20 Set A/D data flow result=40 09:26:20 Set A/D channel type result=40 09:26:20 Set A/D encoding result=40 09:26:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:20 Set channel filter=0.000000e+000 result=40 09:26:20 Config A/D Result=40 09:26:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:20 Get A/D filter: -9.255963e+061 result=40 09:26:20 Get A/D value=-858993460 result=40 09:26:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:26:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:26:20 Aux= 09:26:20 Message to Camera, serial 119289 queued 09:26:29 Received message from Master: op=Shutter serial=119299 09:26:29 Shutter LASER close 09:26:29 Received message from Master: op=PointingHead serial=119303 09:26:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:26:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:26:30 Point started: ret=0 09:26:30 point_skyscan result=0 09:26:31 Check angles 09:26:31 SkyScan query 09:26:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 09:26:31 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 09:26:31 Check angles 09:26:31 SkyScan query 09:26:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.98<-20132 Statuses=0008 0009 09:26:32 Msec=750 True Az=112.995 Ze=-121.98 Az status=0008 Ze status=0009 09:26:32 Check angles 09:26:32 SkyScan query 09:26:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.055<-18737 Statuses=0008 0009 09:26:33 Msec=1500 True Az=112.995 Ze=-101.055 Az status=0008 Ze status=0009 09:26:33 Check angles 09:26:33 SkyScan query 09:26:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 09:26:33 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 09:26:34 Check angles 09:26:34 SkyScan query 09:26:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 09:26:34 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 09:26:34 Check angles 09:26:34 SkyScan query 09:26:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.68<-14512 Statuses=0008 0009 09:26:35 Msec=3750 True Az=112.995 Ze=-37.68 Az status=0008 Ze status=0009 09:26:35 Check angles 09:26:35 SkyScan query 09:26:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.71<-13114 Statuses=0008 0009 09:26:36 Msec=4500 True Az=112.995 Ze=-16.71 Az status=0008 Ze status=0009 09:26:36 Check angles 09:26:36 SkyScan query 09:26:36 SkyScan query done: ret=0 az=113.01<-7534 ze=4.2<-11720 Statuses=0008 0009 09:26:36 Msec=5250 True Az=113.01 Ze=4.2 Az status=0008 Ze status=0009 09:26:37 Check angles 09:26:37 SkyScan query 09:26:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:26:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:26:37 Message to Master queued w/err=0: serial=119303 error=0 09:26:42 Received message from Master: op=Filter serial=119304 09:26:42 Color wheel filter change from 0 to 0 09:26:42 FLIGetFilterPos err=0 currentPosition=0 09:26:42 FLIGetStepsRemaining err=0 RemainingSteps=0 09:26:42 Filter is already there-color wheel unchanged 09:26:42 Received message from Master: op=Shutter serial=119305 09:26:42 Shutter LASER close 09:26:43 Received message from Camera: op=State serial=119307 09:26:43 GetSingleValue result=40 Value=cccccccc 09:26:43 SkyScan query 09:26:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:26:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:43 Parameters OK 09:26:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:43 Set A/D data flow result=40 09:26:43 Set A/D channel type result=40 09:26:43 Set A/D encoding result=40 09:26:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:43 Set channel filter=0.000000e+000 result=40 09:26:43 Config A/D Result=40 09:26:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:43 Get A/D filter: -9.255963e+061 result=40 09:26:43 Get A/D value=-858993460 result=40 09:26:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:43 Parameters OK 09:26:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:43 Set A/D data flow result=40 09:26:43 Set A/D channel type result=40 09:26:43 Set A/D encoding result=40 09:26:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:43 Set channel filter=0.000000e+000 result=40 09:26:43 Config A/D Result=40 09:26:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:43 Get A/D filter: -9.255963e+061 result=40 09:26:43 Get A/D value=-858993460 result=40 09:26:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:26:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:26:43 Aux= 09:26:43 Message to Camera, serial 119307 queued 09:27:20 Received message from Master: op=PointingHead serial=119320 09:27:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:27:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:27:20 Point started: ret=0 09:27:20 point_skyscan result=0 09:27:21 Check angles 09:27:21 SkyScan query 09:27:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:27:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:27:22 Message to Master queued w/err=0: serial=119320 error=0 09:27:27 Received message from Master: op=Filter serial=119321 09:27:27 Color wheel filter change from 0 to 0 09:27:27 FLIGetFilterPos err=0 currentPosition=0 09:27:27 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:27 Filter is already there-color wheel unchanged 09:27:27 Received message from Master: op=Shutter serial=119322 09:27:27 Shutter LASER close 09:27:27 Received message from Camera: op=State serial=119324 09:27:27 GetSingleValue result=40 Value=cccccccc 09:27:27 SkyScan query 09:27:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:27:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:27 Parameters OK 09:27:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:27 Set A/D data flow result=40 09:27:27 Set A/D channel type result=40 09:27:27 Set A/D encoding result=40 09:27:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:27 Set channel filter=0.000000e+000 result=40 09:27:27 Config A/D Result=40 09:27:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:27 Get A/D filter: -9.255963e+061 result=40 09:27:27 Get A/D value=-858993460 result=40 09:27:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:27 Parameters OK 09:27:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:27 Set A/D data flow result=40 09:27:27 Set A/D channel type result=40 09:27:27 Set A/D encoding result=40 09:27:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:27 Set channel filter=0.000000e+000 result=40 09:27:27 Config A/D Result=40 09:27:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:27 Get A/D filter: -9.255963e+061 result=40 09:27:27 Get A/D value=-858993460 result=40 09:27:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:27 Aux= 09:27:27 Message to Camera, serial 119324 queued 09:28:04 Received message from Master: op=PointingHead serial=119337 09:28:04 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:28:04 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:28:05 Point started: ret=0 09:28:05 point_skyscan result=0 09:28:05 Check angles 09:28:05 SkyScan query 09:28:06 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.51<-12434 Statuses=0009 0008 09:28:06 Msec=0 True Az=135.915 Ze=-6.51 Az status=0009 Ze status=0008 09:28:06 Check angles 09:28:06 SkyScan query 09:28:07 SkyScan query done: ret=0 az=153.465<-10231 ze=-6.495<-12433 Statuses=0009 0008 09:28:07 Msec=750 True Az=153.465 Ze=-6.495 Az status=0009 Ze status=0008 09:28:07 Check angles 09:28:07 SkyScan query 09:28:07 SkyScan query done: ret=0 az=170.94<-11396 ze=-6.495<-12433 Statuses=0009 0008 09:28:07 Msec=1500 True Az=170.94 Ze=-6.495 Az status=0009 Ze status=0008 09:28:08 Check angles 09:28:08 SkyScan query 09:28:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:28:08 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:28:08 Message to Master queued w/err=0: serial=119337 error=0 09:28:13 Received message from Master: op=Filter serial=119338 09:28:13 Color wheel filter change from 0 to 0 09:28:13 FLIGetFilterPos err=0 currentPosition=0 09:28:13 FLIGetStepsRemaining err=0 RemainingSteps=0 09:28:13 Filter is already there-color wheel unchanged 09:28:13 Received message from Master: op=Shutter serial=119339 09:28:13 Shutter LASER close 09:28:13 Received message from Camera: op=State serial=119341 09:28:13 GetSingleValue result=40 Value=cccccccc 09:28:13 SkyScan query 09:28:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:28:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:14 Parameters OK 09:28:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:14 Set A/D data flow result=40 09:28:14 Set A/D channel type result=40 09:28:14 Set A/D encoding result=40 09:28:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:14 Set channel filter=0.000000e+000 result=40 09:28:14 Config A/D Result=40 09:28:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:14 Get A/D filter: -9.255963e+061 result=40 09:28:14 Get A/D value=-858993460 result=40 09:28:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:14 Parameters OK 09:28:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:14 Set A/D data flow result=40 09:28:14 Set A/D channel type result=40 09:28:14 Set A/D encoding result=40 09:28:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:14 Set channel filter=0.000000e+000 result=40 09:28:14 Config A/D Result=40 09:28:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:14 Get A/D filter: -9.255963e+061 result=40 09:28:14 Get A/D value=-858993460 result=40 09:28:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:28:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:28:14 Aux= 09:28:14 Message to Camera, serial 119341 queued 09:28:50 Received message from Master: op=PointingHead serial=119353 09:28:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:28:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:28:50 Point started: ret=0 09:28:50 point_skyscan result=0 09:28:51 Check angles 09:28:51 SkyScan query 09:28:52 SkyScan query done: ret=0 az=153.045<-10203 ze=6.51<-11566 Statuses=0009 0008 09:28:52 Msec=0 True Az=153.045 Ze=6.51 Az status=0009 Ze status=0008 09:28:52 Check angles 09:28:52 SkyScan query 09:28:52 SkyScan query done: ret=0 az=135.105<-9007 ze=6.495<-11567 Statuses=0009 0008 09:28:52 Msec=750 True Az=135.105 Ze=6.495 Az status=0009 Ze status=0008 09:28:52 Check angles 09:28:52 SkyScan query 09:28:53 SkyScan query done: ret=0 az=117.66<-7844 ze=6.495<-11567 Statuses=0009 0008 09:28:53 Msec=1500 True Az=117.66 Ze=6.495 Az status=0009 Ze status=0008 09:28:53 Check angles 09:28:53 SkyScan query 09:28:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:28:54 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:28:54 Message to Master queued w/err=0: serial=119353 error=0 09:28:59 Received message from Master: op=Filter serial=119354 09:28:59 Color wheel filter change from 0 to 0 09:28:59 FLIGetFilterPos err=0 currentPosition=0 09:28:59 FLIGetStepsRemaining err=0 RemainingSteps=0 09:28:59 Filter is already there-color wheel unchanged 09:28:59 Received message from Master: op=Shutter serial=119355 09:28:59 Shutter LASER close 09:28:59 Received message from Camera: op=State serial=119357 09:28:59 GetSingleValue result=40 Value=cccccccc 09:28:59 SkyScan query 09:29:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:29:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:00 Parameters OK 09:29:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:00 Set A/D data flow result=40 09:29:00 Set A/D channel type result=40 09:29:00 Set A/D encoding result=40 09:29:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:00 Set channel filter=0.000000e+000 result=40 09:29:00 Config A/D Result=40 09:29:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:00 Get A/D filter: -9.255963e+061 result=40 09:29:00 Get A/D value=-858993460 result=40 09:29:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:00 Parameters OK 09:29:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:00 Set A/D data flow result=40 09:29:00 Set A/D channel type result=40 09:29:00 Set A/D encoding result=40 09:29:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:00 Set channel filter=0.000000e+000 result=40 09:29:00 Config A/D Result=40 09:29:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:00 Get A/D filter: -9.255963e+061 result=40 09:29:00 Get A/D value=-858993460 result=40 09:29:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:29:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:29:00 Aux= 09:29:00 Message to Camera, serial 119357 queued 09:29:36 Received message from Master: op=PointingHead serial=119370 09:29:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:29:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:29:37 Point started: ret=0 09:29:37 point_skyscan result=0 09:29:38 Check angles 09:29:38 SkyScan query 09:29:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.565<-13571 Statuses=0008 0009 09:29:38 Msec=0 True Az=112.995 Ze=-23.565 Az status=0008 Ze status=0009 09:29:38 Check angles 09:29:38 SkyScan query 09:29:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.94<-14996 Statuses=0008 0009 09:29:39 Msec=750 True Az=112.995 Ze=-44.94 Az status=0008 Ze status=0009 09:29:39 Check angles 09:29:39 SkyScan query 09:29:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.91<-16394 Statuses=0008 0009 09:29:40 Msec=1500 True Az=112.995 Ze=-65.91 Az status=0008 Ze status=0009 09:29:40 Check angles 09:29:40 SkyScan query 09:29:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.865<-17791 Statuses=0008 0009 09:29:40 Msec=2250 True Az=112.995 Ze=-86.865 Az status=0008 Ze status=0009 09:29:41 Check angles 09:29:41 SkyScan query 09:29:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.3<-19220 Statuses=0008 0009 09:29:41 Msec=3000 True Az=112.995 Ze=-108.3 Az status=0008 Ze status=0009 09:29:41 Check angles 09:29:41 SkyScan query 09:29:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.24<-20616 Statuses=0008 0009 09:29:42 Msec=3750 True Az=112.995 Ze=-129.24 Az status=0008 Ze status=0009 09:29:42 Check angles 09:29:42 SkyScan query 09:29:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.195<-22013 Statuses=0008 0009 09:29:43 Msec=4500 True Az=112.995 Ze=-150.195 Az status=0008 Ze status=0009 09:29:43 Check angles 09:29:43 SkyScan query 09:29:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 09:29:43 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 09:29:44 Check angles 09:29:44 SkyScan query 09:29:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:29:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:29:44 Message to Master queued w/err=0: serial=119370 error=0 09:29:49 Received message from Master: op=Filter serial=119371 09:29:49 Color wheel filter change from 0 to 0 09:29:49 FLIGetFilterPos err=0 currentPosition=0 09:29:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:29:49 Filter is already there-color wheel unchanged 09:29:49 Received message from Master: op=Shutter serial=119372 09:29:49 Shutter LASER open 09:29:50 Received message from Camera: op=State serial=119374 09:29:50 GetSingleValue result=40 Value=cccccccc 09:29:50 SkyScan query 09:29:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:29:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:50 Parameters OK 09:29:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:50 Set A/D data flow result=40 09:29:50 Set A/D channel type result=40 09:29:50 Set A/D encoding result=40 09:29:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:50 Set channel filter=0.000000e+000 result=40 09:29:50 Config A/D Result=40 09:29:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:50 Get A/D filter: -9.255963e+061 result=40 09:29:50 Get A/D value=-858993460 result=40 09:29:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:50 Parameters OK 09:29:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:50 Set A/D data flow result=40 09:29:50 Set A/D channel type result=40 09:29:50 Set A/D encoding result=40 09:29:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:50 Set channel filter=0.000000e+000 result=40 09:29:50 Config A/D Result=40 09:29:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:50 Get A/D filter: -9.255963e+061 result=40 09:29:50 Get A/D value=-858993460 result=40 09:29:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:29:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:29:50 Aux= 09:29:50 Message to Camera, serial 119374 queued 09:29:59 Received message from Master: op=Shutter serial=119384 09:29:59 Shutter LASER close 09:29:59 Received message from Master: op=PointingHead serial=119388 09:29:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:29:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:29:59 Point started: ret=0 09:29:59 point_skyscan result=0 09:30:00 Check angles 09:30:00 SkyScan query 09:30:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 09:30:01 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 09:30:01 Check angles 09:30:01 SkyScan query 09:30:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 09:30:01 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 09:30:02 Check angles 09:30:02 SkyScan query 09:30:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.175<-18745 Statuses=0008 0009 09:30:02 Msec=1500 True Az=112.995 Ze=-101.175 Az status=0008 Ze status=0009 09:30:02 Check angles 09:30:02 SkyScan query 09:30:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.205<-17347 Statuses=0008 0009 09:30:03 Msec=2250 True Az=112.995 Ze=-80.205 Az status=0008 Ze status=0009 09:30:03 Check angles 09:30:03 SkyScan query 09:30:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 09:30:04 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 09:30:04 Check angles 09:30:04 SkyScan query 09:30:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.235<-14549 Statuses=0008 0009 09:30:04 Msec=3750 True Az=112.995 Ze=-38.235 Az status=0008 Ze status=0009 09:30:05 Check angles 09:30:05 SkyScan query 09:30:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.295<-13153 Statuses=0008 0009 09:30:05 Msec=4500 True Az=112.995 Ze=-17.295 Az status=0008 Ze status=0009 09:30:05 Check angles 09:30:05 SkyScan query 09:30:06 SkyScan query done: ret=0 az=112.995<-7533 ze=3.675<-11755 Statuses=0008 0009 09:30:06 Msec=5250 True Az=112.995 Ze=3.675 Az status=0008 Ze status=0009 09:30:06 Check angles 09:30:06 SkyScan query 09:30:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:30:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:30:07 Message to Master queued w/err=0: serial=119388 error=0 09:30:12 Received message from Master: op=Filter serial=119389 09:30:12 Color wheel filter change from 0 to 0 09:30:12 FLIGetFilterPos err=0 currentPosition=0 09:30:12 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:12 Filter is already there-color wheel unchanged 09:30:12 Received message from Master: op=Shutter serial=119390 09:30:12 Shutter LASER close 09:30:12 Received message from Camera: op=State serial=119392 09:30:12 GetSingleValue result=40 Value=cccccccc 09:30:12 SkyScan query 09:30:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:30:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:13 Parameters OK 09:30:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:13 Set A/D data flow result=40 09:30:13 Set A/D channel type result=40 09:30:13 Set A/D encoding result=40 09:30:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:13 Set channel filter=0.000000e+000 result=40 09:30:13 Config A/D Result=40 09:30:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:13 Get A/D filter: -9.255963e+061 result=40 09:30:13 Get A/D value=-858993460 result=40 09:30:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:13 Parameters OK 09:30:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:13 Set A/D data flow result=40 09:30:13 Set A/D channel type result=40 09:30:13 Set A/D encoding result=40 09:30:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:13 Set channel filter=0.000000e+000 result=40 09:30:13 Config A/D Result=40 09:30:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:13 Get A/D filter: -9.255963e+061 result=40 09:30:13 Get A/D value=-858993460 result=40 09:30:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:30:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:30:13 Aux= 09:30:13 Message to Camera, serial 119392 queued 09:30:49 Received message from Master: op=PointingHead serial=119405 09:30:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:30:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:30:50 Point started: ret=0 09:30:50 point_skyscan result=0 09:30:51 Check angles 09:30:51 SkyScan query 09:30:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:30:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:30:51 Message to Master queued w/err=0: serial=119405 error=0 09:30:56 Received message from Master: op=Filter serial=119406 09:30:56 Color wheel filter change from 0 to 0 09:30:56 FLIGetFilterPos err=0 currentPosition=0 09:30:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:56 Filter is already there-color wheel unchanged 09:30:56 Received message from Master: op=Shutter serial=119407 09:30:56 Shutter LASER close 09:30:56 Received message from Camera: op=State serial=119409 09:30:56 GetSingleValue result=40 Value=cccccccc 09:30:56 SkyScan query 09:30:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:30:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:57 Parameters OK 09:30:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:57 Set A/D data flow result=40 09:30:57 Set A/D channel type result=40 09:30:57 Set A/D encoding result=40 09:30:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:57 Set channel filter=0.000000e+000 result=40 09:30:57 Config A/D Result=40 09:30:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:57 Get A/D filter: -9.255963e+061 result=40 09:30:57 Get A/D value=-858993460 result=40 09:30:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:57 Parameters OK 09:30:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:57 Set A/D data flow result=40 09:30:57 Set A/D channel type result=40 09:30:57 Set A/D encoding result=40 09:30:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:57 Set channel filter=0.000000e+000 result=40 09:30:57 Config A/D Result=40 09:30:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:57 Get A/D filter: -9.255963e+061 result=40 09:30:57 Get A/D value=-858993460 result=40 09:30:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:30:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:30:57 Aux= 09:30:57 Message to Camera, serial 119409 queued 09:31:34 Received message from Master: op=PointingHead serial=119422 09:31:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:31:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:31:34 Point started: ret=0 09:31:34 point_skyscan result=0 09:31:35 Check angles 09:31:35 SkyScan query 09:31:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:31:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:31:35 Message to Master queued w/err=0: serial=119422 error=0 09:31:40 Received message from Master: op=Filter serial=119423 09:31:40 Color wheel filter change from 0 to 0 09:31:40 FLIGetFilterPos err=0 currentPosition=0 09:31:40 FLIGetStepsRemaining err=0 RemainingSteps=0 09:31:40 Filter is already there-color wheel unchanged 09:31:41 Received message from Master: op=Shutter serial=119424 09:31:41 Shutter LASER close 09:31:41 Received message from Camera: op=State serial=119426 09:31:41 GetSingleValue result=40 Value=cccccccc 09:31:41 SkyScan query 09:31:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:31:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:41 Parameters OK 09:31:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:41 Set A/D data flow result=40 09:31:41 Set A/D channel type result=40 09:31:41 Set A/D encoding result=40 09:31:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:41 Set channel filter=0.000000e+000 result=40 09:31:41 Config A/D Result=40 09:31:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:41 Get A/D filter: -9.255963e+061 result=40 09:31:41 Get A/D value=-858993460 result=40 09:31:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:41 Parameters OK 09:31:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:41 Set A/D data flow result=40 09:31:41 Set A/D channel type result=40 09:31:41 Set A/D encoding result=40 09:31:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:41 Set channel filter=0.000000e+000 result=40 09:31:41 Config A/D Result=40 09:31:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:41 Get A/D filter: -9.255963e+061 result=40 09:31:41 Get A/D value=-858993460 result=40 09:31:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:31:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:31:41 Aux= 09:31:41 Message to Camera, serial 119426 queued 09:32:18 Received message from Master: op=PointingHead serial=119439 09:32:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:32:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:32:18 Point started: ret=0 09:32:18 point_skyscan result=0 09:32:19 Check angles 09:32:19 SkyScan query 09:32:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:32:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:32:20 Message to Master queued w/err=0: serial=119439 error=0 09:32:25 Received message from Master: op=Filter serial=119440 09:32:25 Color wheel filter change from 0 to 0 09:32:25 FLIGetFilterPos err=0 currentPosition=0 09:32:25 FLIGetStepsRemaining err=0 RemainingSteps=0 09:32:25 Filter is already there-color wheel unchanged 09:32:25 Received message from Master: op=Shutter serial=119441 09:32:25 Shutter LASER close 09:32:25 Received message from Camera: op=State serial=119443 09:32:25 GetSingleValue result=40 Value=cccccccc 09:32:25 SkyScan query 09:32:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:32:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:25 Parameters OK 09:32:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:25 Set A/D data flow result=40 09:32:25 Set A/D channel type result=40 09:32:25 Set A/D encoding result=40 09:32:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:25 Set channel filter=0.000000e+000 result=40 09:32:25 Config A/D Result=40 09:32:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:25 Get A/D filter: -9.255963e+061 result=40 09:32:25 Get A/D value=-858993460 result=40 09:32:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:25 Parameters OK 09:32:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:25 Set A/D data flow result=40 09:32:25 Set A/D channel type result=40 09:32:25 Set A/D encoding result=40 09:32:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:25 Set channel filter=0.000000e+000 result=40 09:32:25 Config A/D Result=40 09:32:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:25 Get A/D filter: -9.255963e+061 result=40 09:32:25 Get A/D value=-858993460 result=40 09:32:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:32:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:32:25 Aux= 09:32:25 Message to Camera, serial 119443 queued 09:33:02 Received message from Master: op=PointingHead serial=119456 09:33:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:33:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:33:03 Point started: ret=0 09:33:03 point_skyscan result=0 09:33:03 Check angles 09:33:03 SkyScan query 09:33:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.625<-13575 Statuses=0008 0009 09:33:04 Msec=0 True Az=112.995 Ze=-23.625 Az status=0008 Ze status=0009 09:33:04 Check angles 09:33:04 SkyScan query 09:33:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.58<-14972 Statuses=0008 0009 09:33:05 Msec=750 True Az=112.995 Ze=-44.58 Az status=0008 Ze status=0009 09:33:05 Check angles 09:33:05 SkyScan query 09:33:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 09:33:05 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 09:33:06 Check angles 09:33:06 SkyScan query 09:33:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.94<-17796 Statuses=0008 0009 09:33:06 Msec=2250 True Az=112.995 Ze=-86.94 Az status=0008 Ze status=0009 09:33:06 Check angles 09:33:06 SkyScan query 09:33:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.895<-19193 Statuses=0008 0009 09:33:07 Msec=3000 True Az=112.995 Ze=-107.895 Az status=0008 Ze status=0009 09:33:07 Check angles 09:33:07 SkyScan query 09:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.85<-20590 Statuses=0008 0009 09:33:08 Msec=3750 True Az=112.995 Ze=-128.85 Az status=0008 Ze status=0009 09:33:08 Check angles 09:33:08 SkyScan query 09:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 09:33:08 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 09:33:09 Check angles 09:33:09 SkyScan query 09:33:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.06<-23404 Statuses=0008 0009 09:33:09 Msec=5250 True Az=112.995 Ze=-171.06 Az status=0008 Ze status=0009 09:33:09 Check angles 09:33:09 SkyScan query 09:33:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:33:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:33:10 Message to Master queued w/err=0: serial=119456 error=0 09:33:15 Received message from Master: op=Filter serial=119457 09:33:15 Color wheel filter change from 0 to 0 09:33:15 FLIGetFilterPos err=0 currentPosition=0 09:33:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:33:15 Filter is already there-color wheel unchanged 09:33:15 Received message from Master: op=Shutter serial=119458 09:33:15 Shutter LASER open 09:33:15 Received message from Camera: op=State serial=119460 09:33:15 GetSingleValue result=40 Value=cccccccc 09:33:15 SkyScan query 09:33:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:33:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:16 Parameters OK 09:33:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:16 Set A/D data flow result=40 09:33:16 Set A/D channel type result=40 09:33:16 Set A/D encoding result=40 09:33:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:16 Set channel filter=0.000000e+000 result=40 09:33:16 Config A/D Result=40 09:33:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:16 Get A/D filter: -9.255963e+061 result=40 09:33:16 Get A/D value=-858993460 result=40 09:33:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:16 Parameters OK 09:33:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:16 Set A/D data flow result=40 09:33:16 Set A/D channel type result=40 09:33:16 Set A/D encoding result=40 09:33:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:16 Set channel filter=0.000000e+000 result=40 09:33:16 Config A/D Result=40 09:33:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:16 Get A/D filter: -9.255963e+061 result=40 09:33:16 Get A/D value=-858993460 result=40 09:33:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:33:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:33:16 Aux= 09:33:16 Message to Camera, serial 119460 queued 09:33:23 Received message from Master: op=Shutter serial=119469 09:33:23 Shutter LASER close 09:33:24 Received message from Master: op=PointingHead serial=119473 09:33:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:33:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:33:24 Point started: ret=0 09:33:24 point_skyscan result=0 09:33:25 Check angles 09:33:25 SkyScan query 09:33:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 09:33:26 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 09:33:26 Check angles 09:33:26 SkyScan query 09:33:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.325<-20155 Statuses=0008 0009 09:33:26 Msec=750 True Az=112.995 Ze=-122.325 Az status=0008 Ze status=0009 09:33:27 Check angles 09:33:27 SkyScan query 09:33:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.37<-18758 Statuses=0008 0009 09:33:27 Msec=1500 True Az=112.995 Ze=-101.37 Az status=0008 Ze status=0009 09:33:27 Check angles 09:33:27 SkyScan query 09:33:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.415<-17361 Statuses=0008 0009 09:33:28 Msec=2250 True Az=112.995 Ze=-80.415 Az status=0008 Ze status=0009 09:33:28 Check angles 09:33:28 SkyScan query 09:33:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.46<-15964 Statuses=0008 0009 09:33:29 Msec=3000 True Az=112.995 Ze=-59.46 Az status=0008 Ze status=0009 09:33:29 Check angles 09:33:29 SkyScan query 09:33:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.46<-14564 Statuses=0008 0009 09:33:29 Msec=3750 True Az=112.995 Ze=-38.46 Az status=0008 Ze status=0009 09:33:30 Check angles 09:33:30 SkyScan query 09:33:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.535<-13169 Statuses=0008 0009 09:33:30 Msec=4500 True Az=112.995 Ze=-17.535 Az status=0008 Ze status=0009 09:33:30 Check angles 09:33:30 SkyScan query 09:33:31 SkyScan query done: ret=0 az=112.98<-7532 ze=3.45<-11770 Statuses=0008 0009 09:33:31 Msec=5250 True Az=112.98 Ze=3.45 Az status=0008 Ze status=0009 09:33:31 Check angles 09:33:31 SkyScan query 09:33:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:33:32 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:33:32 Message to Master queued w/err=0: serial=119473 error=0 09:33:37 Received message from Master: op=Filter serial=119474 09:33:37 Color wheel filter change from 0 to 0 09:33:37 FLIGetFilterPos err=0 currentPosition=0 09:33:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:33:37 Filter is already there-color wheel unchanged 09:33:37 Received message from Master: op=Shutter serial=119475 09:33:37 Shutter LASER close 09:33:37 Received message from Camera: op=State serial=119477 09:33:37 GetSingleValue result=40 Value=cccccccc 09:33:37 SkyScan query 09:33:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:33:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:38 Parameters OK 09:33:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:38 Set A/D data flow result=40 09:33:38 Set A/D channel type result=40 09:33:38 Set A/D encoding result=40 09:33:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:38 Set channel filter=0.000000e+000 result=40 09:33:38 Config A/D Result=40 09:33:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:38 Get A/D filter: -9.255963e+061 result=40 09:33:38 Get A/D value=-858993460 result=40 09:33:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:38 Parameters OK 09:33:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:38 Set A/D data flow result=40 09:33:38 Set A/D channel type result=40 09:33:38 Set A/D encoding result=40 09:33:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:38 Set channel filter=0.000000e+000 result=40 09:33:38 Config A/D Result=40 09:33:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:38 Get A/D filter: -9.255963e+061 result=40 09:33:38 Get A/D value=-858993460 result=40 09:33:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:33:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:33:38 Aux= 09:33:38 Message to Camera, serial 119477 queued 09:33:38 Received message from Master: op=Identify serial=119478 09:34:14 Received message from Master: op=PointingHead serial=119493 09:34:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:34:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:34:15 Point started: ret=0 09:34:15 point_skyscan result=0 09:34:16 Check angles 09:34:16 SkyScan query 09:34:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:34:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:34:16 Message to Master queued w/err=0: serial=119493 error=0 09:34:21 Received message from Master: op=Filter serial=119494 [UTC 2019-3-5 09:34:21] 09:34:21 Color wheel filter change from 0 to 0 09:34:21 FLIGetFilterPos err=0 currentPosition=0 09:34:21 FLIGetStepsRemaining err=0 RemainingSteps=0 09:34:21 Filter is already there-color wheel unchanged 09:34:21 Received message from Master: op=Shutter serial=119495 09:34:21 Shutter LASER close 09:34:21 Received message from Camera: op=State serial=119497 09:34:21 GetSingleValue result=40 Value=cccccccc 09:34:21 SkyScan query 09:34:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:34:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:22 Parameters OK 09:34:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:22 Set A/D data flow result=40 09:34:22 Set A/D channel type result=40 09:34:22 Set A/D encoding result=40 09:34:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:22 Set channel filter=0.000000e+000 result=40 09:34:22 Config A/D Result=40 09:34:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:22 Get A/D filter: -9.255963e+061 result=40 09:34:22 Get A/D value=-858993460 result=40 09:34:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:22 Parameters OK 09:34:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:22 Set A/D data flow result=40 09:34:22 Set A/D channel type result=40 09:34:22 Set A/D encoding result=40 09:34:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:22 Set channel filter=0.000000e+000 result=40 09:34:22 Config A/D Result=40 09:34:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:22 Get A/D filter: -9.255963e+061 result=40 09:34:22 Get A/D value=-858993460 result=40 09:34:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:34:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:34:22 Aux= 09:34:22 Message to Camera, serial 119497 queued 09:34:59 Received message from Master: op=PointingHead serial=119510 09:34:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:34:59 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:34:59 Point started: ret=0 09:34:59 point_skyscan result=0 09:35:00 Check angles 09:35:00 SkyScan query 09:35:00 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.51<-12434 Statuses=0009 0008 09:35:00 Msec=0 True Az=135.915 Ze=-6.51 Az status=0009 Ze status=0008 09:35:01 Check angles 09:35:01 SkyScan query 09:35:01 SkyScan query done: ret=0 az=153.78<-10252 ze=-6.495<-12433 Statuses=0009 0008 09:35:01 Msec=750 True Az=153.78 Ze=-6.495 Az status=0009 Ze status=0008 09:35:01 Check angles 09:35:01 SkyScan query 09:35:02 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 09:35:02 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 09:35:02 Check angles 09:35:02 SkyScan query 09:35:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:35:03 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:35:03 Message to Master queued w/err=0: serial=119510 error=0 09:35:08 Received message from Master: op=Filter serial=119511 09:35:08 Color wheel filter change from 0 to 0 09:35:08 FLIGetFilterPos err=0 currentPosition=0 09:35:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:08 Filter is already there-color wheel unchanged 09:35:08 Received message from Master: op=Shutter serial=119512 09:35:08 Shutter LASER close 09:35:08 Received message from Camera: op=State serial=119514 09:35:08 GetSingleValue result=40 Value=cccccccc 09:35:08 SkyScan query 09:35:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:35:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:09 Parameters OK 09:35:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:09 Set A/D data flow result=40 09:35:09 Set A/D channel type result=40 09:35:09 Set A/D encoding result=40 09:35:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:09 Set channel filter=0.000000e+000 result=40 09:35:09 Config A/D Result=40 09:35:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:09 Get A/D filter: -9.255963e+061 result=40 09:35:09 Get A/D value=-858993460 result=40 09:35:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:09 Parameters OK 09:35:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:09 Set A/D data flow result=40 09:35:09 Set A/D channel type result=40 09:35:09 Set A/D encoding result=40 09:35:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:09 Set channel filter=0.000000e+000 result=40 09:35:09 Config A/D Result=40 09:35:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:09 Get A/D filter: -9.255963e+061 result=40 09:35:09 Get A/D value=-858993460 result=40 09:35:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:09 Aux= 09:35:09 Message to Camera, serial 119514 queued 09:35:45 Received message from Master: op=PointingHead serial=119527 09:35:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:35:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:35:46 Point started: ret=0 09:35:46 point_skyscan result=0 09:35:46 Check angles 09:35:46 SkyScan query 09:35:47 SkyScan query done: ret=0 az=152.79<-10186 ze=6.51<-11566 Statuses=0009 0008 09:35:47 Msec=0 True Az=152.79 Ze=6.51 Az status=0009 Ze status=0008 09:35:47 Check angles 09:35:47 SkyScan query 09:35:48 SkyScan query done: ret=0 az=134.925<-8995 ze=6.495<-11567 Statuses=0009 0008 09:35:48 Msec=750 True Az=134.925 Ze=6.495 Az status=0009 Ze status=0008 09:35:48 Check angles 09:35:48 SkyScan query 09:35:49 SkyScan query done: ret=0 az=117.525<-7835 ze=6.495<-11567 Statuses=0009 0008 09:35:49 Msec=1500 True Az=117.525 Ze=6.495 Az status=0009 Ze status=0008 09:35:49 Check angles 09:35:49 SkyScan query 09:35:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:35:49 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:35:49 Message to Master queued w/err=0: serial=119527 error=0 09:35:54 Received message from Master: op=Filter serial=119528 09:35:54 Color wheel filter change from 0 to 0 09:35:54 FLIGetFilterPos err=0 currentPosition=0 09:35:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:54 Filter is already there-color wheel unchanged 09:35:54 Received message from Master: op=Shutter serial=119529 09:35:54 Shutter LASER close 09:35:55 Received message from Camera: op=State serial=119531 09:35:55 GetSingleValue result=40 Value=cccccccc 09:35:55 SkyScan query 09:35:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:35:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:55 Parameters OK 09:35:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:55 Set A/D data flow result=40 09:35:55 Set A/D channel type result=40 09:35:55 Set A/D encoding result=40 09:35:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:55 Set channel filter=0.000000e+000 result=40 09:35:55 Config A/D Result=40 09:35:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:55 Get A/D filter: -9.255963e+061 result=40 09:35:55 Get A/D value=-858993460 result=40 09:35:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:55 Parameters OK 09:35:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:55 Set A/D data flow result=40 09:35:55 Set A/D channel type result=40 09:35:55 Set A/D encoding result=40 09:35:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:55 Set channel filter=0.000000e+000 result=40 09:35:55 Config A/D Result=40 09:35:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:55 Get A/D filter: -9.255963e+061 result=40 09:35:55 Get A/D value=-858993460 result=40 09:35:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:55 Aux= 09:35:55 Message to Camera, serial 119531 queued 09:36:32 Received message from Master: op=PointingHead serial=119544 09:36:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:36:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:36:32 Point started: ret=0 09:36:32 point_skyscan result=0 09:36:33 Check angles 09:36:33 SkyScan query 09:36:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.745<-13583 Statuses=0008 0009 09:36:34 Msec=0 True Az=112.995 Ze=-23.745 Az status=0008 Ze status=0009 09:36:34 Check angles 09:36:34 SkyScan query 09:36:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.12<-15008 Statuses=0008 0009 09:36:34 Msec=750 True Az=112.995 Ze=-45.12 Az status=0008 Ze status=0009 09:36:35 Check angles 09:36:35 SkyScan query 09:36:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.105<-16407 Statuses=0008 0009 09:36:35 Msec=1500 True Az=112.995 Ze=-66.105 Az status=0008 Ze status=0009 09:36:35 Check angles 09:36:35 SkyScan query 09:36:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.075<-17805 Statuses=0008 0009 09:36:36 Msec=2250 True Az=112.995 Ze=-87.075 Az status=0008 Ze status=0009 09:36:36 Check angles 09:36:36 SkyScan query 09:36:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.495<-19233 Statuses=0008 0009 09:36:37 Msec=3000 True Az=112.995 Ze=-108.495 Az status=0008 Ze status=0009 09:36:37 Check angles 09:36:37 SkyScan query 09:36:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.84<-20656 Statuses=0008 0009 09:36:37 Msec=3750 True Az=112.995 Ze=-129.84 Az status=0008 Ze status=0009 09:36:38 Check angles 09:36:38 SkyScan query 09:36:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.735<-22049 Statuses=0008 0009 09:36:38 Msec=4500 True Az=112.995 Ze=-150.735 Az status=0008 Ze status=0009 09:36:38 Check angles 09:36:38 SkyScan query 09:36:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.435<-23429 Statuses=0008 0009 09:36:39 Msec=5250 True Az=112.995 Ze=-171.435 Az status=0008 Ze status=0009 09:36:39 Check angles 09:36:39 SkyScan query 09:36:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:36:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:36:40 Message to Master queued w/err=0: serial=119544 error=0 09:36:45 Received message from Master: op=Filter serial=119545 09:36:45 Color wheel filter change from 0 to 0 09:36:45 FLIGetFilterPos err=0 currentPosition=0 09:36:45 FLIGetStepsRemaining err=0 RemainingSteps=0 09:36:45 Filter is already there-color wheel unchanged 09:36:45 Received message from Master: op=Shutter serial=119546 09:36:45 Shutter LASER open 09:36:45 Received message from Camera: op=State serial=119548 09:36:45 GetSingleValue result=40 Value=cccccccc 09:36:45 SkyScan query 09:36:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:36:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:46 Parameters OK 09:36:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:46 Set A/D data flow result=40 09:36:46 Set A/D channel type result=40 09:36:46 Set A/D encoding result=40 09:36:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:46 Set channel filter=0.000000e+000 result=40 09:36:46 Config A/D Result=40 09:36:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:46 Get A/D filter: -9.255963e+061 result=40 09:36:46 Get A/D value=-858993460 result=40 09:36:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:46 Parameters OK 09:36:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:46 Set A/D data flow result=40 09:36:46 Set A/D channel type result=40 09:36:46 Set A/D encoding result=40 09:36:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:46 Set channel filter=0.000000e+000 result=40 09:36:46 Config A/D Result=40 09:36:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:46 Get A/D filter: -9.255963e+061 result=40 09:36:46 Get A/D value=-858993460 result=40 09:36:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:36:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:36:46 Aux= 09:36:46 Message to Camera, serial 119548 queued 09:36:54 Received message from Master: op=Shutter serial=119558 09:36:54 Shutter LASER close 09:36:54 Received message from Master: op=PointingHead serial=119562 09:36:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:36:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:36:55 Point started: ret=0 09:36:55 point_skyscan result=0 09:36:56 Check angles 09:36:56 SkyScan query 09:36:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.475<-21565 Statuses=0008 0009 09:36:56 Msec=0 True Az=112.995 Ze=-143.475 Az status=0008 Ze status=0009 09:36:56 Check angles 09:36:56 SkyScan query 09:36:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.535<-20169 Statuses=0008 0009 09:36:57 Msec=750 True Az=112.995 Ze=-122.535 Az status=0008 Ze status=0009 09:36:57 Check angles 09:36:57 SkyScan query 09:36:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.58<-18772 Statuses=0008 0009 09:36:58 Msec=1500 True Az=112.995 Ze=-101.58 Az status=0008 Ze status=0009 09:36:58 Check angles 09:36:58 SkyScan query 09:36:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.175<-17345 Statuses=0008 0009 09:36:58 Msec=2250 True Az=112.995 Ze=-80.175 Az status=0008 Ze status=0009 09:36:59 Check angles 09:36:59 SkyScan query 09:36:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 09:36:59 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 09:36:59 Check angles 09:36:59 SkyScan query 09:37:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.365<-14491 Statuses=0008 0009 09:37:00 Msec=3750 True Az=112.995 Ze=-37.365 Az status=0008 Ze status=0009 09:37:00 Check angles 09:37:00 SkyScan query 09:37:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.395<-13093 Statuses=0008 0009 09:37:01 Msec=4500 True Az=112.995 Ze=-16.395 Az status=0008 Ze status=0009 09:37:01 Check angles 09:37:01 SkyScan query 09:37:01 SkyScan query done: ret=0 az=113.01<-7534 ze=4.455<-11703 Statuses=0008 0009 09:37:01 Msec=5250 True Az=113.01 Ze=4.455 Az status=0008 Ze status=0009 09:37:02 Check angles 09:37:02 SkyScan query 09:37:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:37:02 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:37:02 Message to Master queued w/err=0: serial=119562 error=0 09:37:07 Received message from Master: op=Filter serial=119563 09:37:07 Color wheel filter change from 0 to 0 09:37:07 FLIGetFilterPos err=0 currentPosition=0 09:37:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:07 Filter is already there-color wheel unchanged 09:37:07 Received message from Master: op=Shutter serial=119564 09:37:07 Shutter LASER close 09:37:07 Received message from Camera: op=State serial=119566 09:37:07 GetSingleValue result=40 Value=cccccccc 09:37:07 SkyScan query 09:37:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:37:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:08 Parameters OK 09:37:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:08 Set A/D data flow result=40 09:37:08 Set A/D channel type result=40 09:37:08 Set A/D encoding result=40 09:37:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:08 Set channel filter=0.000000e+000 result=40 09:37:08 Config A/D Result=40 09:37:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:08 Get A/D filter: -9.255963e+061 result=40 09:37:08 Get A/D value=-858993460 result=40 09:37:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:08 Parameters OK 09:37:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:08 Set A/D data flow result=40 09:37:08 Set A/D channel type result=40 09:37:08 Set A/D encoding result=40 09:37:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:08 Set channel filter=0.000000e+000 result=40 09:37:08 Config A/D Result=40 09:37:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:08 Get A/D filter: -9.255963e+061 result=40 09:37:08 Get A/D value=-858993460 result=40 09:37:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:08 Aux= 09:37:08 Message to Camera, serial 119566 queued 09:37:45 Received message from Master: op=PointingHead serial=119579 09:37:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:37:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:37:45 Point started: ret=0 09:37:45 point_skyscan result=0 09:37:46 Check angles 09:37:46 SkyScan query 09:37:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:37:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:37:47 Message to Master queued w/err=0: serial=119579 error=0 09:37:52 Received message from Master: op=Filter serial=119580 09:37:52 Color wheel filter change from 0 to 0 09:37:52 FLIGetFilterPos err=0 currentPosition=0 09:37:52 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:52 Filter is already there-color wheel unchanged 09:37:52 Received message from Master: op=Shutter serial=119581 09:37:52 Shutter LASER close 09:37:52 Received message from Camera: op=State serial=119583 09:37:52 GetSingleValue result=40 Value=cccccccc 09:37:52 SkyScan query 09:37:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:37:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:52 Parameters OK 09:37:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:52 Set A/D data flow result=40 09:37:52 Set A/D channel type result=40 09:37:52 Set A/D encoding result=40 09:37:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:52 Set channel filter=0.000000e+000 result=40 09:37:52 Config A/D Result=40 09:37:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:52 Get A/D filter: -9.255963e+061 result=40 09:37:52 Get A/D value=-858993460 result=40 09:37:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:52 Parameters OK 09:37:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:52 Set A/D data flow result=40 09:37:52 Set A/D channel type result=40 09:37:52 Set A/D encoding result=40 09:37:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:52 Set channel filter=0.000000e+000 result=40 09:37:52 Config A/D Result=40 09:37:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:52 Get A/D filter: -9.255963e+061 result=40 09:37:52 Get A/D value=-858993460 result=40 09:37:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:52 Aux= 09:37:52 Message to Camera, serial 119583 queued 09:38:29 Received message from Master: op=PointingHead serial=119596 09:38:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:38:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:38:30 Point started: ret=0 09:38:30 point_skyscan result=0 09:38:30 Check angles 09:38:30 SkyScan query 09:38:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:38:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:38:31 Message to Master queued w/err=0: serial=119596 error=0 09:38:36 Received message from Master: op=Filter serial=119597 09:38:36 Color wheel filter change from 0 to 0 09:38:36 FLIGetFilterPos err=0 currentPosition=0 09:38:36 FLIGetStepsRemaining err=0 RemainingSteps=0 09:38:36 Filter is already there-color wheel unchanged 09:38:36 Received message from Master: op=Shutter serial=119598 09:38:36 Shutter LASER close 09:38:36 Received message from Camera: op=State serial=119600 09:38:36 GetSingleValue result=40 Value=cccccccc 09:38:36 SkyScan query 09:38:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:38:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:37 Parameters OK 09:38:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:37 Set A/D data flow result=40 09:38:37 Set A/D channel type result=40 09:38:37 Set A/D encoding result=40 09:38:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:37 Set channel filter=0.000000e+000 result=40 09:38:37 Config A/D Result=40 09:38:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:37 Get A/D filter: -9.255963e+061 result=40 09:38:37 Get A/D value=-858993460 result=40 09:38:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:37 Parameters OK 09:38:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:37 Set A/D data flow result=40 09:38:37 Set A/D channel type result=40 09:38:37 Set A/D encoding result=40 09:38:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:37 Set channel filter=0.000000e+000 result=40 09:38:37 Config A/D Result=40 09:38:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:37 Get A/D filter: -9.255963e+061 result=40 09:38:37 Get A/D value=-858993460 result=40 09:38:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:38:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:38:37 Aux= 09:38:37 Message to Camera, serial 119600 queued 09:39:14 Received message from Master: op=PointingHead serial=119613 09:39:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:39:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:39:14 Point started: ret=0 09:39:14 point_skyscan result=0 09:39:15 Check angles 09:39:15 SkyScan query 09:39:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:39:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:39:15 Message to Master queued w/err=0: serial=119613 error=0 09:39:20 Received message from Master: op=Filter serial=119614 09:39:20 Color wheel filter change from 0 to 0 09:39:20 FLIGetFilterPos err=0 currentPosition=0 09:39:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:39:20 Filter is already there-color wheel unchanged 09:39:20 Received message from Master: op=Shutter serial=119615 09:39:20 Shutter LASER close 09:39:20 Received message from Camera: op=State serial=119617 09:39:20 GetSingleValue result=40 Value=cccccccc 09:39:20 SkyScan query 09:39:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:39:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:21 Parameters OK 09:39:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:21 Set A/D data flow result=40 09:39:21 Set A/D channel type result=40 09:39:21 Set A/D encoding result=40 09:39:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:21 Set channel filter=0.000000e+000 result=40 09:39:21 Config A/D Result=40 09:39:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:21 Get A/D filter: -9.255963e+061 result=40 09:39:21 Get A/D value=-858993460 result=40 09:39:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:21 Parameters OK 09:39:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:21 Set A/D data flow result=40 09:39:21 Set A/D channel type result=40 09:39:21 Set A/D encoding result=40 09:39:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:21 Set channel filter=0.000000e+000 result=40 09:39:21 Config A/D Result=40 09:39:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:21 Get A/D filter: -9.255963e+061 result=40 09:39:21 Get A/D value=-858993460 result=40 09:39:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:39:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:39:21 Aux= 09:39:21 Message to Camera, serial 119617 queued 09:39:58 Received message from Master: op=PointingHead serial=119630 09:39:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:39:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:39:58 Point started: ret=0 09:39:58 point_skyscan result=0 09:39:59 Check angles 09:39:59 SkyScan query 09:40:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 09:40:00 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 09:40:00 Check angles 09:40:00 SkyScan query 09:40:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.235<-14949 Statuses=0008 0009 09:40:00 Msec=750 True Az=112.995 Ze=-44.235 Az status=0008 Ze status=0009 09:40:00 Check angles 09:40:00 SkyScan query 09:40:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.16<-16344 Statuses=0008 0009 09:40:01 Msec=1500 True Az=112.995 Ze=-65.16 Az status=0008 Ze status=0009 09:40:01 Check angles 09:40:01 SkyScan query 09:40:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.07<-17738 Statuses=0008 0009 09:40:02 Msec=2250 True Az=112.995 Ze=-86.07 Az status=0008 Ze status=0009 09:40:02 Check angles 09:40:02 SkyScan query 09:40:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.04<-19136 Statuses=0008 0009 09:40:03 Msec=3000 True Az=112.995 Ze=-107.04 Az status=0008 Ze status=0009 09:40:03 Check angles 09:40:03 SkyScan query 09:40:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.98<-20532 Statuses=0008 0009 09:40:03 Msec=3750 True Az=112.995 Ze=-127.98 Az status=0008 Ze status=0009 09:40:03 Check angles 09:40:03 SkyScan query 09:40:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.935<-21929 Statuses=0008 0009 09:40:04 Msec=4500 True Az=112.995 Ze=-148.935 Az status=0008 Ze status=0009 09:40:04 Check angles 09:40:04 SkyScan query 09:40:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.875<-23325 Statuses=0008 0009 09:40:05 Msec=5250 True Az=112.995 Ze=-169.875 Az status=0008 Ze status=0009 09:40:05 Check angles 09:40:05 SkyScan query 09:40:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:40:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:40:06 Message to Master queued w/err=0: serial=119630 error=0 09:40:11 Received message from Master: op=Filter serial=119631 09:40:11 Color wheel filter change from 0 to 0 09:40:11 FLIGetFilterPos err=0 currentPosition=0 09:40:11 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:11 Filter is already there-color wheel unchanged 09:40:11 Received message from Master: op=Shutter serial=119632 09:40:11 Shutter LASER open 09:40:11 Received message from Camera: op=State serial=119634 09:40:11 GetSingleValue result=40 Value=cccccccc 09:40:11 SkyScan query 09:40:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:40:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:11 Parameters OK 09:40:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:11 Set A/D data flow result=40 09:40:11 Set A/D channel type result=40 09:40:11 Set A/D encoding result=40 09:40:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:11 Set channel filter=0.000000e+000 result=40 09:40:11 Config A/D Result=40 09:40:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:11 Get A/D filter: -9.255963e+061 result=40 09:40:11 Get A/D value=-858993460 result=40 09:40:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:11 Parameters OK 09:40:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:11 Set A/D data flow result=40 09:40:11 Set A/D channel type result=40 09:40:11 Set A/D encoding result=40 09:40:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:11 Set channel filter=0.000000e+000 result=40 09:40:11 Config A/D Result=40 09:40:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:11 Get A/D filter: -9.255963e+061 result=40 09:40:11 Get A/D value=-858993460 result=40 09:40:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:11 Aux= 09:40:11 Message to Camera, serial 119634 queued 09:40:20 Received message from Master: op=Shutter serial=119644 09:40:20 Shutter LASER close 09:40:21 Received message from Master: op=PointingHead serial=119648 09:40:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:40:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:40:21 Point started: ret=0 09:40:21 point_skyscan result=0 09:40:22 Check angles 09:40:22 SkyScan query 09:40:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 09:40:22 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 09:40:22 Check angles 09:40:22 SkyScan query 09:40:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.445<-20163 Statuses=0008 0009 09:40:23 Msec=750 True Az=112.995 Ze=-122.445 Az status=0008 Ze status=0009 09:40:23 Check angles 09:40:23 SkyScan query 09:40:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.49<-18766 Statuses=0008 0009 09:40:24 Msec=1500 True Az=112.995 Ze=-101.49 Az status=0008 Ze status=0009 09:40:24 Check angles 09:40:24 SkyScan query 09:40:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.52<-17368 Statuses=0008 0009 09:40:24 Msec=2250 True Az=112.995 Ze=-80.52 Az status=0008 Ze status=0009 09:40:25 Check angles 09:40:25 SkyScan query 09:40:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.58<-15972 Statuses=0008 0009 09:40:25 Msec=3000 True Az=112.995 Ze=-59.58 Az status=0008 Ze status=0009 09:40:25 Check angles 09:40:25 SkyScan query 09:40:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.595<-14573 Statuses=0008 0009 09:40:26 Msec=3750 True Az=112.995 Ze=-38.595 Az status=0008 Ze status=0009 09:40:26 Check angles 09:40:26 SkyScan query 09:40:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.655<-13177 Statuses=0008 0009 09:40:27 Msec=4500 True Az=112.995 Ze=-17.655 Az status=0008 Ze status=0009 09:40:27 Check angles 09:40:27 SkyScan query 09:40:27 SkyScan query done: ret=0 az=112.995<-7533 ze=3.3<-11780 Statuses=0008 0009 09:40:27 Msec=5250 True Az=112.995 Ze=3.3 Az status=0008 Ze status=0009 09:40:28 Check angles 09:40:28 SkyScan query 09:40:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:40:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:40:28 Message to Master queued w/err=0: serial=119648 error=0 09:40:33 Received message from Master: op=Filter serial=119649 09:40:33 Color wheel filter change from 0 to 0 09:40:33 FLIGetFilterPos err=0 currentPosition=0 09:40:33 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:33 Filter is already there-color wheel unchanged 09:40:33 Received message from Master: op=Shutter serial=119650 09:40:33 Shutter LASER close 09:40:34 Received message from Camera: op=State serial=119652 09:40:34 GetSingleValue result=40 Value=cccccccc 09:40:34 SkyScan query 09:40:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:40:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:34 Parameters OK 09:40:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:34 Set A/D data flow result=40 09:40:34 Set A/D channel type result=40 09:40:34 Set A/D encoding result=40 09:40:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:34 Set channel filter=0.000000e+000 result=40 09:40:34 Config A/D Result=40 09:40:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:34 Get A/D filter: -9.255963e+061 result=40 09:40:34 Get A/D value=-858993460 result=40 09:40:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:34 Parameters OK 09:40:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:34 Set A/D data flow result=40 09:40:34 Set A/D channel type result=40 09:40:34 Set A/D encoding result=40 09:40:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:34 Set channel filter=0.000000e+000 result=40 09:40:34 Config A/D Result=40 09:40:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:34 Get A/D filter: -9.255963e+061 result=40 09:40:34 Get A/D value=-858993460 result=40 09:40:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:34 Aux= 09:40:34 Message to Camera, serial 119652 queued 09:41:11 Received message from Master: op=PointingHead serial=119665 09:41:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:41:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:41:11 Point started: ret=0 09:41:11 point_skyscan result=0 09:41:12 Check angles 09:41:12 SkyScan query 09:41:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:41:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:41:13 Message to Master queued w/err=0: serial=119665 error=0 09:41:18 Received message from Master: op=Filter serial=119666 09:41:18 Color wheel filter change from 0 to 0 09:41:18 FLIGetFilterPos err=0 currentPosition=0 09:41:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:41:18 Filter is already there-color wheel unchanged 09:41:18 Received message from Master: op=Shutter serial=119667 09:41:18 Shutter LASER close 09:41:18 Received message from Camera: op=State serial=119669 09:41:18 GetSingleValue result=40 Value=cccccccc 09:41:18 SkyScan query 09:41:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:41:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:18 Parameters OK 09:41:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:18 Set A/D data flow result=40 09:41:18 Set A/D channel type result=40 09:41:18 Set A/D encoding result=40 09:41:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:18 Set channel filter=0.000000e+000 result=40 09:41:18 Config A/D Result=40 09:41:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:18 Get A/D filter: -9.255963e+061 result=40 09:41:18 Get A/D value=-858993460 result=40 09:41:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:18 Parameters OK 09:41:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:18 Set A/D data flow result=40 09:41:18 Set A/D channel type result=40 09:41:18 Set A/D encoding result=40 09:41:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:18 Set channel filter=0.000000e+000 result=40 09:41:18 Config A/D Result=40 09:41:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:18 Get A/D filter: -9.255963e+061 result=40 09:41:18 Get A/D value=-858993460 result=40 09:41:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:41:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:41:18 Aux= 09:41:18 Message to Camera, serial 119669 queued 09:41:54 Received message from Master: op=PointingHead serial=119681 09:41:54 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:41:54 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:41:55 Point started: ret=0 09:41:55 point_skyscan result=0 09:41:55 Check angles 09:41:55 SkyScan query 09:41:56 SkyScan query done: ret=0 az=135.765<-9051 ze=-6.51<-12434 Statuses=0009 0008 09:41:56 Msec=0 True Az=135.765 Ze=-6.51 Az status=0009 Ze status=0008 09:41:56 Check angles 09:41:56 SkyScan query 09:41:57 SkyScan query done: ret=0 az=153.705<-10247 ze=-6.495<-12433 Statuses=0009 0008 09:41:57 Msec=750 True Az=153.705 Ze=-6.495 Az status=0009 Ze status=0008 09:41:57 Check angles 09:41:57 SkyScan query 09:41:57 SkyScan query done: ret=0 az=171.555<-11437 ze=-6.495<-12433 Statuses=0009 0008 09:41:57 Msec=1500 True Az=171.555 Ze=-6.495 Az status=0009 Ze status=0008 09:41:58 Check angles 09:41:58 SkyScan query 09:41:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:41:58 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:41:58 Message to Master queued w/err=0: serial=119681 error=0 09:42:03 Received message from Master: op=Filter serial=119682 09:42:03 Color wheel filter change from 0 to 0 09:42:03 FLIGetFilterPos err=0 currentPosition=0 09:42:03 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:03 Filter is already there-color wheel unchanged 09:42:03 Received message from Master: op=Shutter serial=119683 09:42:03 Shutter LASER close 09:42:03 Received message from Camera: op=State serial=119685 09:42:03 GetSingleValue result=40 Value=cccccccc 09:42:03 SkyScan query 09:42:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:42:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:04 Parameters OK 09:42:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:04 Set A/D data flow result=40 09:42:04 Set A/D channel type result=40 09:42:04 Set A/D encoding result=40 09:42:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:04 Set channel filter=0.000000e+000 result=40 09:42:04 Config A/D Result=40 09:42:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:04 Get A/D filter: -9.255963e+061 result=40 09:42:04 Get A/D value=-858993460 result=40 09:42:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:04 Parameters OK 09:42:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:04 Set A/D data flow result=40 09:42:04 Set A/D channel type result=40 09:42:04 Set A/D encoding result=40 09:42:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:04 Set channel filter=0.000000e+000 result=40 09:42:04 Config A/D Result=40 09:42:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:04 Get A/D filter: -9.255963e+061 result=40 09:42:04 Get A/D value=-858993460 result=40 09:42:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:04 Aux= 09:42:04 Message to Camera, serial 119685 queued 09:42:40 Received message from Master: op=PointingHead serial=119697 09:42:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:42:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:42:40 Point started: ret=0 09:42:40 point_skyscan result=0 09:42:41 Check angles 09:42:41 SkyScan query 09:42:42 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 09:42:42 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 09:42:42 Check angles 09:42:42 SkyScan query 09:42:42 SkyScan query done: ret=0 az=135.285<-9019 ze=6.495<-11567 Statuses=0009 0008 09:42:42 Msec=750 True Az=135.285 Ze=6.495 Az status=0009 Ze status=0008 09:42:43 Check angles 09:42:43 SkyScan query 09:42:43 SkyScan query done: ret=0 az=117.48<-7832 ze=6.495<-11567 Statuses=0009 0008 09:42:43 Msec=1500 True Az=117.48 Ze=6.495 Az status=0009 Ze status=0008 09:42:43 Check angles 09:42:43 SkyScan query 09:42:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:42:44 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:42:44 Message to Master queued w/err=0: serial=119697 error=0 09:42:49 Received message from Master: op=Filter serial=119698 09:42:49 Color wheel filter change from 0 to 0 09:42:49 FLIGetFilterPos err=0 currentPosition=0 09:42:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:49 Filter is already there-color wheel unchanged 09:42:49 Received message from Master: op=Shutter serial=119699 09:42:49 Shutter LASER close 09:42:49 Received message from Camera: op=State serial=119701 09:42:49 GetSingleValue result=40 Value=cccccccc 09:42:49 SkyScan query 09:42:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:42:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:50 Parameters OK 09:42:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:50 Set A/D data flow result=40 09:42:50 Set A/D channel type result=40 09:42:50 Set A/D encoding result=40 09:42:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:50 Set channel filter=0.000000e+000 result=40 09:42:50 Config A/D Result=40 09:42:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:50 Get A/D filter: -9.255963e+061 result=40 09:42:50 Get A/D value=-858993460 result=40 09:42:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:50 Parameters OK 09:42:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:50 Set A/D data flow result=40 09:42:50 Set A/D channel type result=40 09:42:50 Set A/D encoding result=40 09:42:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:50 Set channel filter=0.000000e+000 result=40 09:42:50 Config A/D Result=40 09:42:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:50 Get A/D filter: -9.255963e+061 result=40 09:42:50 Get A/D value=-858993460 result=40 09:42:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:50 Aux= 09:42:50 Message to Camera, serial 119701 queued 09:43:26 Received message from Master: op=PointingHead serial=119714 09:43:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:43:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:43:27 Point started: ret=0 09:43:27 point_skyscan result=0 09:43:28 Check angles 09:43:28 SkyScan query 09:43:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.19<-13546 Statuses=0008 0009 09:43:28 Msec=0 True Az=112.995 Ze=-23.19 Az status=0008 Ze status=0009 09:43:28 Check angles 09:43:28 SkyScan query 09:43:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.52<-14968 Statuses=0008 0009 09:43:29 Msec=750 True Az=112.995 Ze=-44.52 Az status=0008 Ze status=0009 09:43:29 Check angles 09:43:29 SkyScan query 09:43:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.475<-16365 Statuses=0008 0009 09:43:30 Msec=1500 True Az=112.995 Ze=-65.475 Az status=0008 Ze status=0009 09:43:30 Check angles 09:43:30 SkyScan query 09:43:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.43<-17762 Statuses=0008 0009 09:43:30 Msec=2250 True Az=112.995 Ze=-86.43 Az status=0008 Ze status=0009 09:43:31 Check angles 09:43:31 SkyScan query 09:43:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.385<-19159 Statuses=0008 0009 09:43:31 Msec=3000 True Az=112.995 Ze=-107.385 Az status=0008 Ze status=0009 09:43:31 Check angles 09:43:31 SkyScan query 09:43:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.34<-20556 Statuses=0008 0009 09:43:32 Msec=3750 True Az=112.995 Ze=-128.34 Az status=0008 Ze status=0009 09:43:32 Check angles 09:43:32 SkyScan query 09:43:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.34<-21956 Statuses=0008 0009 09:43:33 Msec=4500 True Az=112.995 Ze=-149.34 Az status=0008 Ze status=0009 09:43:33 Check angles 09:43:33 SkyScan query 09:43:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.265<-23351 Statuses=0008 0009 09:43:33 Msec=5250 True Az=112.995 Ze=-170.265 Az status=0008 Ze status=0009 09:43:34 Check angles 09:43:34 SkyScan query 09:43:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:43:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:43:34 Message to Master queued w/err=0: serial=119714 error=0 09:43:39 Received message from Master: op=Filter serial=119715 09:43:39 Color wheel filter change from 0 to 0 09:43:39 FLIGetFilterPos err=0 currentPosition=0 09:43:39 FLIGetStepsRemaining err=0 RemainingSteps=0 09:43:39 Filter is already there-color wheel unchanged 09:43:39 Received message from Master: op=Shutter serial=119716 09:43:39 Shutter LASER open 09:43:40 Received message from Camera: op=State serial=119718 09:43:40 GetSingleValue result=40 Value=cccccccc 09:43:40 SkyScan query 09:43:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:43:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:40 Parameters OK 09:43:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:40 Set A/D data flow result=40 09:43:40 Set A/D channel type result=40 09:43:40 Set A/D encoding result=40 09:43:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:40 Set channel filter=0.000000e+000 result=40 09:43:40 Config A/D Result=40 09:43:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:40 Get A/D filter: -9.255963e+061 result=40 09:43:40 Get A/D value=-858993460 result=40 09:43:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:40 Parameters OK 09:43:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:40 Set A/D data flow result=40 09:43:40 Set A/D channel type result=40 09:43:40 Set A/D encoding result=40 09:43:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:40 Set channel filter=0.000000e+000 result=40 09:43:40 Config A/D Result=40 09:43:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:40 Get A/D filter: -9.255963e+061 result=40 09:43:40 Get A/D value=-858993460 result=40 09:43:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:43:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:43:40 Aux= 09:43:40 Message to Camera, serial 119718 queued 09:43:49 Received message from Master: op=Shutter serial=119728 09:43:49 Shutter LASER close 09:43:49 Received message from Master: op=PointingHead serial=119732 09:43:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:43:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:43:49 Point started: ret=0 09:43:49 point_skyscan result=0 [UTC 2019-3-5 09:43:50] 09:43:50 Check angles 09:43:50 SkyScan query 09:43:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 09:43:51 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 09:43:51 Check angles 09:43:51 SkyScan query 09:43:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 09:43:51 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 09:43:52 Check angles 09:43:52 SkyScan query 09:43:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.175<-18745 Statuses=0008 0009 09:43:52 Msec=1500 True Az=112.995 Ze=-101.175 Az status=0008 Ze status=0009 09:43:52 Check angles 09:43:52 SkyScan query 09:43:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.205<-17347 Statuses=0008 0009 09:43:53 Msec=2250 True Az=112.995 Ze=-80.205 Az status=0008 Ze status=0009 09:43:53 Check angles 09:43:53 SkyScan query 09:43:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 09:43:54 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 09:43:54 Check angles 09:43:54 SkyScan query 09:43:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.22<-14548 Statuses=0008 0009 09:43:54 Msec=3750 True Az=112.995 Ze=-38.22 Az status=0008 Ze status=0009 09:43:55 Check angles 09:43:55 SkyScan query 09:43:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 09:43:55 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 09:43:55 Check angles 09:43:55 SkyScan query 09:43:56 SkyScan query done: ret=0 az=112.995<-7533 ze=3.675<-11755 Statuses=0008 0009 09:43:56 Msec=5250 True Az=112.995 Ze=3.675 Az status=0008 Ze status=0009 09:43:56 Check angles 09:43:56 SkyScan query 09:43:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:43:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:43:57 Message to Master queued w/err=0: serial=119732 error=0 09:44:02 Received message from Master: op=Filter serial=119733 09:44:02 Color wheel filter change from 0 to 0 09:44:02 FLIGetFilterPos err=0 currentPosition=0 09:44:02 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:02 Filter is already there-color wheel unchanged 09:44:02 Received message from Master: op=Shutter serial=119734 09:44:02 Shutter LASER close 09:44:02 Received message from Camera: op=State serial=119736 09:44:02 GetSingleValue result=40 Value=cccccccc 09:44:02 SkyScan query 09:44:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:44:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:03 Parameters OK 09:44:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:03 Set A/D data flow result=40 09:44:03 Set A/D channel type result=40 09:44:03 Set A/D encoding result=40 09:44:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:03 Set channel filter=0.000000e+000 result=40 09:44:03 Config A/D Result=40 09:44:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:03 Get A/D filter: -9.255963e+061 result=40 09:44:03 Get A/D value=-858993460 result=40 09:44:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:03 Parameters OK 09:44:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:03 Set A/D data flow result=40 09:44:03 Set A/D channel type result=40 09:44:03 Set A/D encoding result=40 09:44:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:03 Set channel filter=0.000000e+000 result=40 09:44:03 Config A/D Result=40 09:44:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:03 Get A/D filter: -9.255963e+061 result=40 09:44:03 Get A/D value=-858993460 result=40 09:44:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:03 Aux= 09:44:03 Message to Camera, serial 119736 queued 09:44:39 Received message from Master: op=PointingHead serial=119749 09:44:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:44:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:44:40 Point started: ret=0 09:44:40 point_skyscan result=0 09:44:40 Check angles 09:44:40 SkyScan query 09:44:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:44:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:44:41 Message to Master queued w/err=0: serial=119749 error=0 09:44:46 Received message from Master: op=Filter serial=119750 09:44:46 Color wheel filter change from 0 to 0 09:44:46 FLIGetFilterPos err=0 currentPosition=0 09:44:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:46 Filter is already there-color wheel unchanged 09:44:46 Received message from Master: op=Shutter serial=119751 09:44:46 Shutter LASER close 09:44:46 Received message from Camera: op=State serial=119753 09:44:46 GetSingleValue result=40 Value=cccccccc 09:44:46 SkyScan query 09:44:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:44:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:47 Parameters OK 09:44:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:47 Set A/D data flow result=40 09:44:47 Set A/D channel type result=40 09:44:47 Set A/D encoding result=40 09:44:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:47 Set channel filter=0.000000e+000 result=40 09:44:47 Config A/D Result=40 09:44:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:47 Get A/D filter: -9.255963e+061 result=40 09:44:47 Get A/D value=-858993460 result=40 09:44:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:47 Parameters OK 09:44:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:47 Set A/D data flow result=40 09:44:47 Set A/D channel type result=40 09:44:47 Set A/D encoding result=40 09:44:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:47 Set channel filter=0.000000e+000 result=40 09:44:47 Config A/D Result=40 09:44:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:47 Get A/D filter: -9.255963e+061 result=40 09:44:47 Get A/D value=-858993460 result=40 09:44:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:47 Aux= 09:44:47 Message to Camera, serial 119753 queued 09:45:24 Received message from Master: op=PointingHead serial=119766 09:45:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:45:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:45:24 Point started: ret=0 09:45:24 point_skyscan result=0 09:45:25 Check angles 09:45:25 SkyScan query 09:45:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:45:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:45:25 Message to Master queued w/err=0: serial=119766 error=0 09:45:30 Received message from Master: op=Filter serial=119767 09:45:30 Color wheel filter change from 0 to 0 09:45:30 FLIGetFilterPos err=0 currentPosition=0 09:45:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:45:30 Filter is already there-color wheel unchanged 09:45:30 Received message from Master: op=Shutter serial=119768 09:45:30 Shutter LASER close 09:45:31 Received message from Camera: op=State serial=119770 09:45:31 GetSingleValue result=40 Value=cccccccc 09:45:31 SkyScan query 09:45:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:45:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:31 Parameters OK 09:45:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:31 Set A/D data flow result=40 09:45:31 Set A/D channel type result=40 09:45:31 Set A/D encoding result=40 09:45:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:31 Set channel filter=0.000000e+000 result=40 09:45:31 Config A/D Result=40 09:45:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:31 Get A/D filter: -9.255963e+061 result=40 09:45:31 Get A/D value=-858993460 result=40 09:45:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:31 Parameters OK 09:45:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:31 Set A/D data flow result=40 09:45:31 Set A/D channel type result=40 09:45:31 Set A/D encoding result=40 09:45:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:31 Set channel filter=0.000000e+000 result=40 09:45:31 Config A/D Result=40 09:45:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:31 Get A/D filter: -9.255963e+061 result=40 09:45:31 Get A/D value=-858993460 result=40 09:45:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:45:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:45:31 Aux= 09:45:31 Message to Camera, serial 119770 queued 09:46:08 Received message from Master: op=PointingHead serial=119783 09:46:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:46:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:46:08 Point started: ret=0 09:46:08 point_skyscan result=0 09:46:09 Check angles 09:46:09 SkyScan query 09:46:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:46:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:46:10 Message to Master queued w/err=0: serial=119783 error=0 09:46:15 Received message from Master: op=Filter serial=119784 09:46:15 Color wheel filter change from 0 to 0 09:46:15 FLIGetFilterPos err=0 currentPosition=0 09:46:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:46:15 Filter is already there-color wheel unchanged 09:46:15 Received message from Master: op=Shutter serial=119785 09:46:15 Shutter LASER close 09:46:15 Received message from Camera: op=State serial=119787 09:46:15 GetSingleValue result=40 Value=cccccccc 09:46:15 SkyScan query 09:46:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:46:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:15 Parameters OK 09:46:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:15 Set A/D data flow result=40 09:46:15 Set A/D channel type result=40 09:46:15 Set A/D encoding result=40 09:46:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:15 Set channel filter=0.000000e+000 result=40 09:46:15 Config A/D Result=40 09:46:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:15 Get A/D filter: -9.255963e+061 result=40 09:46:15 Get A/D value=-858993460 result=40 09:46:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:15 Parameters OK 09:46:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:15 Set A/D data flow result=40 09:46:15 Set A/D channel type result=40 09:46:15 Set A/D encoding result=40 09:46:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:15 Set channel filter=0.000000e+000 result=40 09:46:15 Config A/D Result=40 09:46:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:15 Get A/D filter: -9.255963e+061 result=40 09:46:15 Get A/D value=-858993460 result=40 09:46:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:46:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:46:15 Aux= 09:46:15 Message to Camera, serial 119787 queued 09:46:52 Received message from Master: op=PointingHead serial=119800 09:46:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:46:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:46:53 Point started: ret=0 09:46:53 point_skyscan result=0 09:46:53 Check angles 09:46:53 SkyScan query 09:46:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 09:46:54 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 09:46:54 Check angles 09:46:54 SkyScan query 09:46:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 09:46:55 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 09:46:55 Check angles 09:46:55 SkyScan query 09:46:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 09:46:55 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 09:46:56 Check angles 09:46:56 SkyScan query 09:46:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.46<-17764 Statuses=0008 0009 09:46:56 Msec=2250 True Az=112.995 Ze=-86.46 Az status=0008 Ze status=0009 09:46:56 Check angles 09:46:56 SkyScan query 09:46:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 09:46:57 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 09:46:57 Check angles 09:46:57 SkyScan query 09:46:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.34<-20556 Statuses=0008 0009 09:46:58 Msec=3750 True Az=112.995 Ze=-128.34 Az status=0008 Ze status=0009 09:46:58 Check angles 09:46:58 SkyScan query 09:46:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.325<-21955 Statuses=0008 0009 09:46:58 Msec=4500 True Az=112.995 Ze=-149.325 Az status=0008 Ze status=0009 09:46:59 Check angles 09:46:59 SkyScan query 09:46:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.295<-23353 Statuses=0008 0009 09:46:59 Msec=5250 True Az=112.995 Ze=-170.295 Az status=0008 Ze status=0009 09:46:59 Check angles 09:46:59 SkyScan query 09:47:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:47:00 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:47:00 Message to Master queued w/err=0: serial=119800 error=0 09:47:05 Received message from Master: op=Filter serial=119801 09:47:05 Color wheel filter change from 0 to 0 09:47:05 FLIGetFilterPos err=0 currentPosition=0 09:47:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:47:05 Filter is already there-color wheel unchanged 09:47:05 Received message from Master: op=Shutter serial=119802 09:47:05 Shutter LASER open 09:47:05 Received message from Camera: op=State serial=119804 09:47:05 GetSingleValue result=40 Value=cccccccc 09:47:05 SkyScan query 09:47:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:47:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:06 Parameters OK 09:47:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:06 Set A/D data flow result=40 09:47:06 Set A/D channel type result=40 09:47:06 Set A/D encoding result=40 09:47:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:06 Set channel filter=0.000000e+000 result=40 09:47:06 Config A/D Result=40 09:47:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:06 Get A/D filter: -9.255963e+061 result=40 09:47:06 Get A/D value=-858993460 result=40 09:47:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:06 Parameters OK 09:47:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:06 Set A/D data flow result=40 09:47:06 Set A/D channel type result=40 09:47:06 Set A/D encoding result=40 09:47:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:06 Set channel filter=0.000000e+000 result=40 09:47:06 Config A/D Result=40 09:47:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:06 Get A/D filter: -9.255963e+061 result=40 09:47:06 Get A/D value=-858993460 result=40 09:47:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:47:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:47:06 Aux= 09:47:06 Message to Camera, serial 119804 queued 09:47:13 Received message from Master: op=Shutter serial=119813 09:47:13 Shutter LASER close 09:47:14 Received message from Master: op=PointingHead serial=119817 09:47:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:47:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:47:14 Point started: ret=0 09:47:14 point_skyscan result=0 09:47:15 Check angles 09:47:15 SkyScan query 09:47:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.475<-21565 Statuses=0008 0009 09:47:16 Msec=0 True Az=112.995 Ze=-143.475 Az status=0008 Ze status=0009 09:47:16 Check angles 09:47:16 SkyScan query 09:47:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 09:47:16 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 09:47:17 Check angles 09:47:17 SkyScan query 09:47:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.16<-18744 Statuses=0008 0009 09:47:17 Msec=1500 True Az=112.995 Ze=-101.16 Az status=0008 Ze status=0009 09:47:17 Check angles 09:47:17 SkyScan query 09:47:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 09:47:18 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 09:47:18 Check angles 09:47:18 SkyScan query 09:47:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.235<-15949 Statuses=0008 0009 09:47:19 Msec=3000 True Az=112.995 Ze=-59.235 Az status=0008 Ze status=0009 09:47:19 Check angles 09:47:19 SkyScan query 09:47:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.22<-14548 Statuses=0008 0009 09:47:19 Msec=3750 True Az=112.995 Ze=-38.22 Az status=0008 Ze status=0009 09:47:20 Check angles 09:47:20 SkyScan query 09:47:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 09:47:20 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 09:47:20 Check angles 09:47:20 SkyScan query 09:47:21 SkyScan query done: ret=0 az=112.995<-7533 ze=3.705<-11753 Statuses=0008 0009 09:47:21 Msec=5250 True Az=112.995 Ze=3.705 Az status=0008 Ze status=0009 09:47:21 Check angles 09:47:21 SkyScan query 09:47:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:47:22 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:47:22 Message to Master queued w/err=0: serial=119817 error=0 09:47:27 Received message from Master: op=Filter serial=119818 09:47:27 Color wheel filter change from 0 to 0 09:47:27 FLIGetFilterPos err=0 currentPosition=0 09:47:27 FLIGetStepsRemaining err=0 RemainingSteps=0 09:47:27 Filter is already there-color wheel unchanged 09:47:27 Received message from Master: op=Shutter serial=119819 09:47:27 Shutter LASER close 09:47:27 Received message from Camera: op=State serial=119821 09:47:27 GetSingleValue result=40 Value=cccccccc 09:47:27 SkyScan query 09:47:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:47:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:28 Parameters OK 09:47:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:28 Set A/D data flow result=40 09:47:28 Set A/D channel type result=40 09:47:28 Set A/D encoding result=40 09:47:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:28 Set channel filter=0.000000e+000 result=40 09:47:28 Config A/D Result=40 09:47:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:28 Get A/D filter: -9.255963e+061 result=40 09:47:28 Get A/D value=-858993460 result=40 09:47:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:28 Parameters OK 09:47:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:28 Set A/D data flow result=40 09:47:28 Set A/D channel type result=40 09:47:28 Set A/D encoding result=40 09:47:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:28 Set channel filter=0.000000e+000 result=40 09:47:28 Config A/D Result=40 09:47:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:28 Get A/D filter: -9.255963e+061 result=40 09:47:28 Get A/D value=-858993460 result=40 09:47:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:47:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:47:28 Aux= 09:47:28 Message to Camera, serial 119821 queued 09:48:04 Received message from Master: op=PointingHead serial=119834 09:48:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:48:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:48:05 Point started: ret=0 09:48:05 point_skyscan result=0 09:48:06 Check angles 09:48:06 SkyScan query 09:48:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:48:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:48:06 Message to Master queued w/err=0: serial=119834 error=0 09:48:11 Received message from Master: op=Filter serial=119835 09:48:11 Color wheel filter change from 0 to 0 09:48:11 FLIGetFilterPos err=0 currentPosition=0 09:48:11 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:11 Filter is already there-color wheel unchanged 09:48:11 Received message from Master: op=Shutter serial=119836 09:48:11 Shutter LASER close 09:48:11 Received message from Camera: op=State serial=119838 09:48:11 GetSingleValue result=40 Value=cccccccc 09:48:11 SkyScan query 09:48:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:48:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:12 Parameters OK 09:48:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:12 Set A/D data flow result=40 09:48:12 Set A/D channel type result=40 09:48:12 Set A/D encoding result=40 09:48:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:12 Set channel filter=0.000000e+000 result=40 09:48:12 Config A/D Result=40 09:48:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:12 Get A/D filter: -9.255963e+061 result=40 09:48:12 Get A/D value=-858993460 result=40 09:48:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:12 Parameters OK 09:48:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:12 Set A/D data flow result=40 09:48:12 Set A/D channel type result=40 09:48:12 Set A/D encoding result=40 09:48:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:12 Set channel filter=0.000000e+000 result=40 09:48:12 Config A/D Result=40 09:48:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:12 Get A/D filter: -9.255963e+061 result=40 09:48:12 Get A/D value=-858993460 result=40 09:48:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:48:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:48:12 Aux= 09:48:12 Message to Camera, serial 119838 queued 09:48:49 Received message from Master: op=PointingHead serial=119851 09:48:49 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:48:49 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:48:49 Point started: ret=0 09:48:49 point_skyscan result=0 09:48:50 Check angles 09:48:50 SkyScan query 09:48:50 SkyScan query done: ret=0 az=136.155<-9077 ze=-6.51<-12434 Statuses=0009 0008 09:48:50 Msec=0 True Az=136.155 Ze=-6.51 Az status=0009 Ze status=0008 09:48:51 Check angles 09:48:51 SkyScan query 09:48:51 SkyScan query done: ret=0 az=153.975<-10265 ze=-6.495<-12433 Statuses=0009 0008 09:48:51 Msec=750 True Az=153.975 Ze=-6.495 Az status=0009 Ze status=0008 09:48:51 Check angles 09:48:51 SkyScan query 09:48:52 SkyScan query done: ret=0 az=171.42<-11428 ze=-6.495<-12433 Statuses=0009 0008 09:48:52 Msec=1500 True Az=171.42 Ze=-6.495 Az status=0009 Ze status=0008 09:48:52 Check angles 09:48:52 SkyScan query 09:48:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:48:53 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:48:53 Message to Master queued w/err=0: serial=119851 error=0 09:48:58 Received message from Master: op=Filter serial=119852 09:48:58 Color wheel filter change from 0 to 0 09:48:58 FLIGetFilterPos err=0 currentPosition=0 09:48:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:58 Filter is already there-color wheel unchanged 09:48:58 Received message from Master: op=Shutter serial=119853 09:48:58 Shutter LASER close 09:48:58 Received message from Camera: op=State serial=119855 09:48:58 GetSingleValue result=40 Value=cccccccc 09:48:58 SkyScan query 09:48:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:48:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:58 Parameters OK 09:48:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:58 Set A/D data flow result=40 09:48:58 Set A/D channel type result=40 09:48:58 Set A/D encoding result=40 09:48:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:58 Set channel filter=0.000000e+000 result=40 09:48:58 Config A/D Result=40 09:48:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:58 Get A/D filter: -9.255963e+061 result=40 09:48:58 Get A/D value=-858993460 result=40 09:48:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:58 Parameters OK 09:48:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:58 Set A/D data flow result=40 09:48:58 Set A/D channel type result=40 09:48:58 Set A/D encoding result=40 09:48:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:58 Set channel filter=0.000000e+000 result=40 09:48:58 Config A/D Result=40 09:48:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:58 Get A/D filter: -9.255963e+061 result=40 09:48:58 Get A/D value=-858993460 result=40 09:48:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:48:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:48:58 Aux= 09:48:58 Message to Camera, serial 119855 queued 09:49:35 Received message from Master: op=PointingHead serial=119868 09:49:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:49:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:49:36 Point started: ret=0 09:49:36 point_skyscan result=0 09:49:36 Check angles 09:49:36 SkyScan query 09:49:37 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 09:49:37 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 09:49:37 Check angles 09:49:37 SkyScan query 09:49:38 SkyScan query done: ret=0 az=135.285<-9019 ze=6.495<-11567 Statuses=0009 0008 09:49:38 Msec=750 True Az=135.285 Ze=6.495 Az status=0009 Ze status=0008 09:49:38 Check angles 09:49:38 SkyScan query 09:49:38 SkyScan query done: ret=0 az=117.825<-7855 ze=6.495<-11567 Statuses=0009 0008 09:49:38 Msec=1500 True Az=117.825 Ze=6.495 Az status=0009 Ze status=0008 09:49:39 Check angles 09:49:39 SkyScan query 09:49:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:49:39 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:49:39 Message to Master queued w/err=0: serial=119868 error=0 09:49:44 Received message from Master: op=Filter serial=119869 09:49:44 Color wheel filter change from 0 to 0 09:49:44 FLIGetFilterPos err=0 currentPosition=0 09:49:44 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:44 Filter is already there-color wheel unchanged 09:49:44 Received message from Master: op=Shutter serial=119870 09:49:44 Shutter LASER close 09:49:44 Received message from Camera: op=State serial=119872 09:49:44 GetSingleValue result=40 Value=cccccccc 09:49:44 SkyScan query 09:49:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:49:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:45 Parameters OK 09:49:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:45 Set A/D data flow result=40 09:49:45 Set A/D channel type result=40 09:49:45 Set A/D encoding result=40 09:49:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:45 Set channel filter=0.000000e+000 result=40 09:49:45 Config A/D Result=40 09:49:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:45 Get A/D filter: -9.255963e+061 result=40 09:49:45 Get A/D value=-858993460 result=40 09:49:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:45 Parameters OK 09:49:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:45 Set A/D data flow result=40 09:49:45 Set A/D channel type result=40 09:49:45 Set A/D encoding result=40 09:49:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:45 Set channel filter=0.000000e+000 result=40 09:49:45 Config A/D Result=40 09:49:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:45 Get A/D filter: -9.255963e+061 result=40 09:49:45 Get A/D value=-858993460 result=40 09:49:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:45 Aux= 09:49:45 Message to Camera, serial 119872 queued 09:50:22 Received message from Master: op=PointingHead serial=119885 09:50:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:50:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:50:22 Point started: ret=0 09:50:22 point_skyscan result=0 09:50:23 Check angles 09:50:23 SkyScan query 09:50:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.49<-13566 Statuses=0008 0009 09:50:24 Msec=0 True Az=112.995 Ze=-23.49 Az status=0008 Ze status=0009 09:50:24 Check angles 09:50:24 SkyScan query 09:50:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 09:50:24 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 09:50:24 Check angles 09:50:24 SkyScan query 09:50:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 09:50:25 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 09:50:25 Check angles 09:50:25 SkyScan query 09:50:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 09:50:26 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 09:50:26 Check angles 09:50:26 SkyScan query 09:50:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.28<-19152 Statuses=0008 0009 09:50:27 Msec=3000 True Az=112.995 Ze=-107.28 Az status=0008 Ze status=0009 09:50:27 Check angles 09:50:27 SkyScan query 09:50:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.235<-20549 Statuses=0008 0009 09:50:27 Msec=3750 True Az=112.995 Ze=-128.235 Az status=0008 Ze status=0009 09:50:27 Check angles 09:50:27 SkyScan query 09:50:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.7<-21980 Statuses=0008 0009 09:50:28 Msec=4500 True Az=112.995 Ze=-149.7 Az status=0008 Ze status=0009 09:50:28 Check angles 09:50:28 SkyScan query 09:50:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.61<-23374 Statuses=0008 0009 09:50:29 Msec=5250 True Az=112.995 Ze=-170.61 Az status=0008 Ze status=0009 09:50:29 Check angles 09:50:29 SkyScan query 09:50:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:50:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:50:30 Message to Master queued w/err=0: serial=119885 error=0 09:50:35 Received message from Master: op=Filter serial=119886 09:50:35 Color wheel filter change from 0 to 0 09:50:35 FLIGetFilterPos err=0 currentPosition=0 09:50:35 FLIGetStepsRemaining err=0 RemainingSteps=0 09:50:35 Filter is already there-color wheel unchanged 09:50:35 Received message from Master: op=Shutter serial=119887 09:50:35 Shutter LASER open 09:50:35 Received message from Camera: op=State serial=119889 09:50:35 GetSingleValue result=40 Value=cccccccc 09:50:35 SkyScan query 09:50:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:50:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:35 Parameters OK 09:50:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:35 Set A/D data flow result=40 09:50:35 Set A/D channel type result=40 09:50:35 Set A/D encoding result=40 09:50:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:35 Set channel filter=0.000000e+000 result=40 09:50:35 Config A/D Result=40 09:50:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:35 Get A/D filter: -9.255963e+061 result=40 09:50:35 Get A/D value=-858993460 result=40 09:50:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:35 Parameters OK 09:50:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:35 Set A/D data flow result=40 09:50:35 Set A/D channel type result=40 09:50:35 Set A/D encoding result=40 09:50:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:35 Set channel filter=0.000000e+000 result=40 09:50:35 Config A/D Result=40 09:50:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:35 Get A/D filter: -9.255963e+061 result=40 09:50:35 Get A/D value=-858993460 result=40 09:50:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:50:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:50:35 Aux= 09:50:35 Message to Camera, serial 119889 queued 09:50:44 Received message from Master: op=Shutter serial=119899 09:50:44 Shutter LASER close 09:50:44 Received message from Master: op=PointingHead serial=119903 09:50:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:50:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:50:45 Point started: ret=0 09:50:45 point_skyscan result=0 09:50:45 Check angles 09:50:45 SkyScan query 09:50:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 09:50:46 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 09:50:46 Check angles 09:50:46 SkyScan query 09:50:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.785<-20119 Statuses=0008 0009 09:50:47 Msec=750 True Az=112.995 Ze=-121.785 Az status=0008 Ze status=0009 09:50:47 Check angles 09:50:47 SkyScan query 09:50:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.845<-18723 Statuses=0008 0009 09:50:48 Msec=1500 True Az=112.995 Ze=-100.845 Az status=0008 Ze status=0009 09:50:48 Check angles 09:50:48 SkyScan query 09:50:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.86<-17324 Statuses=0008 0009 09:50:48 Msec=2250 True Az=112.995 Ze=-79.86 Az status=0008 Ze status=0009 09:50:48 Check angles 09:50:48 SkyScan query 09:50:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.92<-15928 Statuses=0008 0009 09:50:49 Msec=3000 True Az=112.995 Ze=-58.92 Az status=0008 Ze status=0009 09:50:49 Check angles 09:50:49 SkyScan query 09:50:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.905<-14527 Statuses=0008 0009 09:50:50 Msec=3750 True Az=112.995 Ze=-37.905 Az status=0008 Ze status=0009 09:50:50 Check angles 09:50:50 SkyScan query 09:50:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.965<-13131 Statuses=0008 0009 09:50:51 Msec=4500 True Az=112.995 Ze=-16.965 Az status=0008 Ze status=0009 09:50:51 Check angles 09:50:51 SkyScan query 09:50:51 SkyScan query done: ret=0 az=112.995<-7533 ze=3.99<-11734 Statuses=0008 0009 09:50:51 Msec=5250 True Az=112.995 Ze=3.99 Az status=0008 Ze status=0009 09:50:51 Check angles 09:50:51 SkyScan query 09:50:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:50:52 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:50:52 Message to Master queued w/err=0: serial=119903 error=0 09:50:57 Received message from Master: op=Filter serial=119904 09:50:57 Color wheel filter change from 0 to 0 09:50:57 FLIGetFilterPos err=0 currentPosition=0 09:50:57 FLIGetStepsRemaining err=0 RemainingSteps=0 09:50:57 Filter is already there-color wheel unchanged 09:50:57 Received message from Master: op=Shutter serial=119905 09:50:57 Shutter LASER close 09:50:57 Received message from Camera: op=State serial=119907 09:50:57 GetSingleValue result=40 Value=cccccccc 09:50:57 SkyScan query 09:50:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:50:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:58 Parameters OK 09:50:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:58 Set A/D data flow result=40 09:50:58 Set A/D channel type result=40 09:50:58 Set A/D encoding result=40 09:50:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:58 Set channel filter=0.000000e+000 result=40 09:50:58 Config A/D Result=40 09:50:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:58 Get A/D filter: -9.255963e+061 result=40 09:50:58 Get A/D value=-858993460 result=40 09:50:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:58 Parameters OK 09:50:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:58 Set A/D data flow result=40 09:50:58 Set A/D channel type result=40 09:50:58 Set A/D encoding result=40 09:50:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:58 Set channel filter=0.000000e+000 result=40 09:50:58 Config A/D Result=40 09:50:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:58 Get A/D filter: -9.255963e+061 result=40 09:50:58 Get A/D value=-858993460 result=40 09:50:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:50:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:50:58 Aux= 09:50:58 Message to Camera, serial 119907 queued 09:51:35 Received message from Master: op=PointingHead serial=119920 09:51:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:51:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:51:35 Point started: ret=0 09:51:35 point_skyscan result=0 09:51:36 Check angles 09:51:36 SkyScan query 09:51:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:51:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:51:36 Message to Master queued w/err=0: serial=119920 error=0 09:51:42 Received message from Master: op=Filter serial=119921 09:51:42 Color wheel filter change from 0 to 0 09:51:42 FLIGetFilterPos err=0 currentPosition=0 09:51:42 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:42 Filter is already there-color wheel unchanged 09:51:42 Received message from Master: op=Shutter serial=119922 09:51:42 Shutter LASER close 09:51:42 Received message from Camera: op=State serial=119924 09:51:42 GetSingleValue result=40 Value=cccccccc 09:51:42 SkyScan query 09:51:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:51:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:42 Parameters OK 09:51:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:42 Set A/D data flow result=40 09:51:42 Set A/D channel type result=40 09:51:42 Set A/D encoding result=40 09:51:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:42 Set channel filter=0.000000e+000 result=40 09:51:42 Config A/D Result=40 09:51:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:42 Get A/D filter: -9.255963e+061 result=40 09:51:42 Get A/D value=-858993460 result=40 09:51:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:42 Parameters OK 09:51:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:42 Set A/D data flow result=40 09:51:42 Set A/D channel type result=40 09:51:42 Set A/D encoding result=40 09:51:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:42 Set channel filter=0.000000e+000 result=40 09:51:42 Config A/D Result=40 09:51:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:42 Get A/D filter: -9.255963e+061 result=40 09:51:42 Get A/D value=-858993460 result=40 09:51:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:42 Aux= 09:51:42 Message to Camera, serial 119924 queued 09:52:19 Received message from Master: op=PointingHead serial=119937 09:52:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:52:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:52:19 Point started: ret=0 09:52:19 point_skyscan result=0 09:52:20 Check angles 09:52:20 SkyScan query 09:52:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:52:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:52:21 Message to Master queued w/err=0: serial=119937 error=0 09:52:26 Received message from Master: op=Filter serial=119938 09:52:26 Color wheel filter change from 0 to 0 09:52:26 FLIGetFilterPos err=0 currentPosition=0 09:52:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:52:26 Filter is already there-color wheel unchanged 09:52:26 Received message from Master: op=Shutter serial=119939 09:52:26 Shutter LASER close 09:52:26 Received message from Camera: op=State serial=119941 09:52:26 GetSingleValue result=40 Value=cccccccc 09:52:26 SkyScan query 09:52:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:52:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:27 Parameters OK 09:52:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:27 Set A/D data flow result=40 09:52:27 Set A/D channel type result=40 09:52:27 Set A/D encoding result=40 09:52:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:27 Set channel filter=0.000000e+000 result=40 09:52:27 Config A/D Result=40 09:52:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:27 Get A/D filter: -9.255963e+061 result=40 09:52:27 Get A/D value=-858993460 result=40 09:52:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:27 Parameters OK 09:52:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:27 Set A/D data flow result=40 09:52:27 Set A/D channel type result=40 09:52:27 Set A/D encoding result=40 09:52:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:27 Set channel filter=0.000000e+000 result=40 09:52:27 Config A/D Result=40 09:52:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:27 Get A/D filter: -9.255963e+061 result=40 09:52:27 Get A/D value=-858993460 result=40 09:52:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:52:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:52:27 Aux= 09:52:27 Message to Camera, serial 119941 queued 09:53:03 Received message from Master: op=PointingHead serial=119954 09:53:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:53:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:53:04 Point started: ret=0 09:53:04 point_skyscan result=0 09:53:05 Check angles 09:53:05 SkyScan query 09:53:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:53:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:53:05 Message to Master queued w/err=0: serial=119954 error=0 09:53:10 Received message from Master: op=Filter serial=119955 09:53:10 Color wheel filter change from 0 to 0 09:53:10 FLIGetFilterPos err=0 currentPosition=0 09:53:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:53:10 Filter is already there-color wheel unchanged 09:53:10 Received message from Master: op=Shutter serial=119956 09:53:10 Shutter LASER close 09:53:10 Received message from Camera: op=State serial=119958 09:53:10 GetSingleValue result=40 Value=cccccccc 09:53:10 SkyScan query 09:53:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:53:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:11 Parameters OK 09:53:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:11 Set A/D data flow result=40 09:53:11 Set A/D channel type result=40 09:53:11 Set A/D encoding result=40 09:53:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:11 Set channel filter=0.000000e+000 result=40 09:53:11 Config A/D Result=40 09:53:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:11 Get A/D filter: -9.255963e+061 result=40 09:53:11 Get A/D value=-858993460 result=40 09:53:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:11 Parameters OK 09:53:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:11 Set A/D data flow result=40 09:53:11 Set A/D channel type result=40 09:53:11 Set A/D encoding result=40 09:53:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:11 Set channel filter=0.000000e+000 result=40 09:53:11 Config A/D Result=40 09:53:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:11 Get A/D filter: -9.255963e+061 result=40 09:53:11 Get A/D value=-858993460 result=40 09:53:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:53:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:53:11 Aux= 09:53:11 Message to Camera, serial 119958 queued 09:53:48 Received message from Master: op=PointingHead serial=119971 09:53:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:53:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:53:48 Point started: ret=0 09:53:48 point_skyscan result=0 09:53:49 Check angles 09:53:49 SkyScan query 09:53:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 09:53:49 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 09:53:50 Check angles 09:53:50 SkyScan query 09:53:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.31<-14954 Statuses=0008 0009 09:53:50 Msec=750 True Az=112.995 Ze=-44.31 Az status=0008 Ze status=0009 09:53:50 Check angles 09:53:50 SkyScan query 09:53:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.655<-16377 Statuses=0008 0009 09:53:51 Msec=1500 True Az=112.995 Ze=-65.655 Az status=0008 Ze status=0009 09:53:51 Check angles 09:53:51 SkyScan query 09:53:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 09:53:52 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 09:53:52 Check angles 09:53:52 SkyScan query 09:53:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.565<-19171 Statuses=0008 0009 09:53:52 Msec=3000 True Az=112.995 Ze=-107.565 Az status=0008 Ze status=0009 09:53:53 Check angles 09:53:53 SkyScan query 09:53:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.535<-20569 Statuses=0008 0009 09:53:53 Msec=3750 True Az=112.995 Ze=-128.535 Az status=0008 Ze status=0009 09:53:53 Check angles 09:53:53 SkyScan query 09:53:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.52<-21968 Statuses=0008 0009 09:53:54 Msec=4500 True Az=112.995 Ze=-149.52 Az status=0008 Ze status=0009 09:53:54 Check angles 09:53:54 SkyScan query 09:53:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.46<-23364 Statuses=0008 0009 09:53:55 Msec=5250 True Az=112.995 Ze=-170.46 Az status=0008 Ze status=0009 09:53:55 Check angles 09:53:55 SkyScan query 09:53:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:53:55 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:53:55 Message to Master queued w/err=0: serial=119971 error=0 09:54:00 Received message from Master: op=Filter serial=119972 09:54:00 Color wheel filter change from 0 to 0 09:54:00 FLIGetFilterPos err=0 currentPosition=0 09:54:00 FLIGetStepsRemaining err=0 RemainingSteps=0 09:54:00 Filter is already there-color wheel unchanged 09:54:01 Received message from Master: op=Shutter serial=119973 09:54:01 Shutter LASER open 09:54:01 Received message from Camera: op=State serial=119975 09:54:01 GetSingleValue result=40 Value=cccccccc 09:54:01 SkyScan query 09:54:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:54:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:01 Parameters OK 09:54:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:01 Set A/D data flow result=40 09:54:01 Set A/D channel type result=40 09:54:01 Set A/D encoding result=40 09:54:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:01 Set channel filter=0.000000e+000 result=40 09:54:01 Config A/D Result=40 09:54:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:01 Get A/D filter: -9.255963e+061 result=40 09:54:01 Get A/D value=-858993460 result=40 09:54:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:01 Parameters OK 09:54:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:01 Set A/D data flow result=40 09:54:01 Set A/D channel type result=40 09:54:01 Set A/D encoding result=40 09:54:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:01 Set channel filter=0.000000e+000 result=40 09:54:01 Config A/D Result=40 09:54:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:01 Get A/D filter: -9.255963e+061 result=40 09:54:01 Get A/D value=-858993460 result=40 09:54:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:54:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:54:01 Aux= 09:54:01 Message to Camera, serial 119975 queued 09:54:10 Received message from Master: op=Shutter serial=119985 09:54:10 Shutter LASER close 09:54:10 Received message from Master: op=PointingHead serial=119989 09:54:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:54:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:54:11 Point started: ret=0 09:54:11 point_skyscan result=0 09:54:11 Check angles 09:54:11 SkyScan query 09:54:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 09:54:12 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 09:54:12 Check angles 09:54:12 SkyScan query 09:54:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.265<-20151 Statuses=0008 0009 09:54:13 Msec=750 True Az=112.995 Ze=-122.265 Az status=0008 Ze status=0009 09:54:13 Check angles 09:54:13 SkyScan query 09:54:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.325<-18755 Statuses=0008 0009 09:54:14 Msec=1500 True Az=112.995 Ze=-101.325 Az status=0008 Ze status=0009 [UTC 2019-3-5 09:54:14] 09:54:14 Check angles 09:54:14 SkyScan query 09:54:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-78.585<-17239 Statuses=0008 0009 09:54:14 Msec=2250 True Az=112.995 Ze=-78.585 Az status=0008 Ze status=0009 09:54:14 Check angles 09:54:14 SkyScan query 09:54:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.415<-15961 Statuses=0008 0009 09:54:15 Msec=3000 True Az=112.995 Ze=-59.415 Az status=0008 Ze status=0009 09:54:15 Check angles 09:54:15 SkyScan query 09:54:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.415<-14561 Statuses=0008 0009 09:54:16 Msec=3750 True Az=112.995 Ze=-38.415 Az status=0008 Ze status=0009 09:54:16 Check angles 09:54:16 SkyScan query 09:54:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.49<-13166 Statuses=0008 0009 09:54:17 Msec=4500 True Az=112.995 Ze=-17.49 Az status=0008 Ze status=0009 09:54:17 Check angles 09:54:17 SkyScan query 09:54:17 SkyScan query done: ret=0 az=112.995<-7533 ze=3.51<-11766 Statuses=0008 0009 09:54:17 Msec=5250 True Az=112.995 Ze=3.51 Az status=0008 Ze status=0009 09:54:17 Check angles 09:54:17 SkyScan query 09:54:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:54:18 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:54:18 Message to Master queued w/err=0: serial=119989 error=0 09:54:23 Received message from Master: op=Filter serial=119990 09:54:23 Color wheel filter change from 0 to 0 09:54:23 FLIGetFilterPos err=0 currentPosition=0 09:54:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:54:23 Filter is already there-color wheel unchanged 09:54:23 Received message from Master: op=Shutter serial=119991 09:54:23 Shutter LASER close 09:54:23 Received message from Camera: op=State serial=119993 09:54:23 GetSingleValue result=40 Value=cccccccc 09:54:23 SkyScan query 09:54:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:54:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:24 Parameters OK 09:54:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:24 Set A/D data flow result=40 09:54:24 Set A/D channel type result=40 09:54:24 Set A/D encoding result=40 09:54:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:24 Set channel filter=0.000000e+000 result=40 09:54:24 Config A/D Result=40 09:54:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:24 Get A/D filter: -9.255963e+061 result=40 09:54:24 Get A/D value=-858993460 result=40 09:54:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:24 Parameters OK 09:54:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:24 Set A/D data flow result=40 09:54:24 Set A/D channel type result=40 09:54:24 Set A/D encoding result=40 09:54:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:24 Set channel filter=0.000000e+000 result=40 09:54:24 Config A/D Result=40 09:54:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:24 Get A/D filter: -9.255963e+061 result=40 09:54:24 Get A/D value=-858993460 result=40 09:54:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:54:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:54:24 Aux= 09:54:24 Message to Camera, serial 119993 queued 09:55:01 Received message from Master: op=PointingHead serial=120006 09:55:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:55:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:55:01 Point started: ret=0 09:55:01 point_skyscan result=0 09:55:02 Check angles 09:55:02 SkyScan query 09:55:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:55:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:55:02 Message to Master queued w/err=0: serial=120006 error=0 09:55:07 Received message from Master: op=Filter serial=120007 09:55:07 Color wheel filter change from 0 to 0 09:55:07 FLIGetFilterPos err=0 currentPosition=0 09:55:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:07 Filter is already there-color wheel unchanged 09:55:08 Received message from Master: op=Shutter serial=120008 09:55:08 Shutter LASER close 09:55:08 Received message from Camera: op=State serial=120010 09:55:08 GetSingleValue result=40 Value=cccccccc 09:55:08 SkyScan query 09:55:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:55:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:08 Parameters OK 09:55:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:08 Set A/D data flow result=40 09:55:08 Set A/D channel type result=40 09:55:08 Set A/D encoding result=40 09:55:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:08 Set channel filter=0.000000e+000 result=40 09:55:08 Config A/D Result=40 09:55:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:08 Get A/D filter: -9.255963e+061 result=40 09:55:08 Get A/D value=-858993460 result=40 09:55:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:08 Parameters OK 09:55:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:08 Set A/D data flow result=40 09:55:08 Set A/D channel type result=40 09:55:08 Set A/D encoding result=40 09:55:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:08 Set channel filter=0.000000e+000 result=40 09:55:08 Config A/D Result=40 09:55:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:08 Get A/D filter: -9.255963e+061 result=40 09:55:08 Get A/D value=-858993460 result=40 09:55:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:08 Aux= 09:55:08 Message to Camera, serial 120010 queued 09:55:45 Received message from Master: op=PointingHead serial=120023 09:55:45 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:55:45 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:55:45 Point started: ret=0 09:55:45 point_skyscan result=0 09:55:46 Check angles 09:55:46 SkyScan query 09:55:47 SkyScan query done: ret=0 az=135.975<-9065 ze=-6.51<-12434 Statuses=0009 0008 09:55:47 Msec=0 True Az=135.975 Ze=-6.51 Az status=0009 Ze status=0008 09:55:47 Check angles 09:55:47 SkyScan query 09:55:48 SkyScan query done: ret=0 az=153.45<-10230 ze=-6.495<-12433 Statuses=0009 0008 09:55:48 Msec=750 True Az=153.45 Ze=-6.495 Az status=0009 Ze status=0008 09:55:48 Check angles 09:55:48 SkyScan query 09:55:48 SkyScan query done: ret=0 az=170.925<-11395 ze=-6.495<-12433 Statuses=0009 0008 09:55:48 Msec=1500 True Az=170.925 Ze=-6.495 Az status=0009 Ze status=0008 09:55:48 Check angles 09:55:48 SkyScan query 09:55:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:55:49 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:55:49 Message to Master queued w/err=0: serial=120023 error=0 09:55:54 Received message from Master: op=Filter serial=120024 09:55:54 Color wheel filter change from 0 to 0 09:55:54 FLIGetFilterPos err=0 currentPosition=0 09:55:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:54 Filter is already there-color wheel unchanged 09:55:54 Received message from Master: op=Shutter serial=120025 09:55:54 Shutter LASER close 09:55:54 Received message from Camera: op=State serial=120027 09:55:54 GetSingleValue result=40 Value=cccccccc 09:55:54 SkyScan query 09:55:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:55:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:55 Parameters OK 09:55:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:55 Set A/D data flow result=40 09:55:55 Set A/D channel type result=40 09:55:55 Set A/D encoding result=40 09:55:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:55 Set channel filter=0.000000e+000 result=40 09:55:55 Config A/D Result=40 09:55:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:55 Get A/D filter: -9.255963e+061 result=40 09:55:55 Get A/D value=-858993460 result=40 09:55:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:55 Parameters OK 09:55:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:55 Set A/D data flow result=40 09:55:55 Set A/D channel type result=40 09:55:55 Set A/D encoding result=40 09:55:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:55 Set channel filter=0.000000e+000 result=40 09:55:55 Config A/D Result=40 09:55:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:55 Get A/D filter: -9.255963e+061 result=40 09:55:55 Get A/D value=-858993460 result=40 09:55:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:55 Aux= 09:55:55 Message to Camera, serial 120027 queued 09:56:32 Received message from Master: op=PointingHead serial=120040 09:56:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:56:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:56:32 Point started: ret=0 09:56:32 point_skyscan result=0 09:56:33 Check angles 09:56:33 SkyScan query 09:56:33 SkyScan query done: ret=0 az=153.015<-10201 ze=6.51<-11566 Statuses=0009 0008 09:56:33 Msec=0 True Az=153.015 Ze=6.51 Az status=0009 Ze status=0008 09:56:34 Check angles 09:56:34 SkyScan query 09:56:34 SkyScan query done: ret=0 az=135.585<-9039 ze=6.495<-11567 Statuses=0009 0008 09:56:34 Msec=750 True Az=135.585 Ze=6.495 Az status=0009 Ze status=0008 09:56:34 Check angles 09:56:34 SkyScan query 09:56:35 SkyScan query done: ret=0 az=118.065<-7871 ze=6.495<-11567 Statuses=0009 0008 09:56:35 Msec=1500 True Az=118.065 Ze=6.495 Az status=0009 Ze status=0008 09:56:35 Check angles 09:56:35 SkyScan query 09:56:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:56:36 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:56:36 Message to Master queued w/err=0: serial=120040 error=0 09:56:41 Received message from Master: op=Filter serial=120041 09:56:41 Color wheel filter change from 0 to 0 09:56:41 FLIGetFilterPos err=0 currentPosition=0 09:56:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:56:41 Filter is already there-color wheel unchanged 09:56:41 Received message from Master: op=Shutter serial=120042 09:56:41 Shutter LASER close 09:56:41 Received message from Camera: op=State serial=120044 09:56:41 GetSingleValue result=40 Value=cccccccc 09:56:41 SkyScan query 09:56:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:56:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:41 Parameters OK 09:56:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:41 Set A/D data flow result=40 09:56:41 Set A/D channel type result=40 09:56:41 Set A/D encoding result=40 09:56:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:41 Set channel filter=0.000000e+000 result=40 09:56:41 Config A/D Result=40 09:56:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:41 Get A/D filter: -9.255963e+061 result=40 09:56:41 Get A/D value=-858993460 result=40 09:56:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:41 Parameters OK 09:56:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:41 Set A/D data flow result=40 09:56:41 Set A/D channel type result=40 09:56:41 Set A/D encoding result=40 09:56:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:41 Set channel filter=0.000000e+000 result=40 09:56:41 Config A/D Result=40 09:56:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:41 Get A/D filter: -9.255963e+061 result=40 09:56:41 Get A/D value=-858993460 result=40 09:56:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:56:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:56:41 Aux= 09:56:41 Message to Camera, serial 120044 queued 09:57:18 Received message from Master: op=PointingHead serial=120057 09:57:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:57:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:57:19 Point started: ret=0 09:57:19 point_skyscan result=0 09:57:19 Check angles 09:57:19 SkyScan query 09:57:20 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.355<-13557 Statuses=0008 0009 09:57:20 Msec=0 True Az=112.98 Ze=-23.355 Az status=0008 Ze status=0009 09:57:20 Check angles 09:57:20 SkyScan query 09:57:21 SkyScan query done: ret=0 az=112.98<-7532 ze=-44.4<-14960 Statuses=0008 0009 09:57:21 Msec=750 True Az=112.98 Ze=-44.4 Az status=0008 Ze status=0009 09:57:21 Check angles 09:57:21 SkyScan query 09:57:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.265<-16351 Statuses=0008 0009 09:57:21 Msec=1500 True Az=112.995 Ze=-65.265 Az status=0008 Ze status=0009 09:57:22 Check angles 09:57:22 SkyScan query 09:57:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.205<-17747 Statuses=0008 0009 09:57:22 Msec=2250 True Az=112.995 Ze=-86.205 Az status=0008 Ze status=0009 09:57:22 Check angles 09:57:22 SkyScan query 09:57:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.13<-19142 Statuses=0008 0009 09:57:23 Msec=3000 True Az=112.995 Ze=-107.13 Az status=0008 Ze status=0009 09:57:23 Check angles 09:57:23 SkyScan query 09:57:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.1<-20540 Statuses=0008 0009 09:57:24 Msec=3750 True Az=112.995 Ze=-128.1 Az status=0008 Ze status=0009 09:57:24 Check angles 09:57:24 SkyScan query 09:57:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.085<-21939 Statuses=0008 0009 09:57:24 Msec=4500 True Az=112.995 Ze=-149.085 Az status=0008 Ze status=0009 09:57:25 Check angles 09:57:25 SkyScan query 09:57:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.01<-23334 Statuses=0008 0009 09:57:25 Msec=5250 True Az=112.995 Ze=-170.01 Az status=0008 Ze status=0009 09:57:25 Check angles 09:57:25 SkyScan query 09:57:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:57:26 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:57:26 Message to Master queued w/err=0: serial=120057 error=0 09:57:31 Received message from Master: op=Filter serial=120058 09:57:31 Color wheel filter change from 0 to 0 09:57:31 FLIGetFilterPos err=0 currentPosition=0 09:57:31 FLIGetStepsRemaining err=0 RemainingSteps=0 09:57:31 Filter is already there-color wheel unchanged 09:57:31 Received message from Master: op=Shutter serial=120059 09:57:31 Shutter LASER open 09:57:31 Received message from Camera: op=State serial=120061 09:57:31 GetSingleValue result=40 Value=cccccccc 09:57:31 SkyScan query 09:57:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:57:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:32 Parameters OK 09:57:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:32 Set A/D data flow result=40 09:57:32 Set A/D channel type result=40 09:57:32 Set A/D encoding result=40 09:57:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:32 Set channel filter=0.000000e+000 result=40 09:57:32 Config A/D Result=40 09:57:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:32 Get A/D filter: -9.255963e+061 result=40 09:57:32 Get A/D value=-858993460 result=40 09:57:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:32 Parameters OK 09:57:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:32 Set A/D data flow result=40 09:57:32 Set A/D channel type result=40 09:57:32 Set A/D encoding result=40 09:57:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:32 Set channel filter=0.000000e+000 result=40 09:57:32 Config A/D Result=40 09:57:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:32 Get A/D filter: -9.255963e+061 result=40 09:57:32 Get A/D value=-858993460 result=40 09:57:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:57:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:57:32 Aux= 09:57:32 Message to Camera, serial 120061 queued 09:57:39 Received message from Master: op=Shutter serial=120070 09:57:39 Shutter LASER close 09:57:40 Received message from Master: op=PointingHead serial=120074 09:57:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:57:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:57:40 Point started: ret=0 09:57:40 point_skyscan result=0 09:57:41 Check angles 09:57:41 SkyScan query 09:57:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 09:57:41 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 09:57:42 Check angles 09:57:42 SkyScan query 09:57:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.205<-20147 Statuses=0008 0009 09:57:42 Msec=750 True Az=112.995 Ze=-122.205 Az status=0008 Ze status=0009 09:57:42 Check angles 09:57:42 SkyScan query 09:57:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.28<-18752 Statuses=0008 0009 09:57:43 Msec=1500 True Az=112.995 Ze=-101.28 Az status=0008 Ze status=0009 09:57:43 Check angles 09:57:43 SkyScan query 09:57:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 09:57:44 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 09:57:44 Check angles 09:57:44 SkyScan query 09:57:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.34<-15956 Statuses=0008 0009 09:57:44 Msec=3000 True Az=112.995 Ze=-59.34 Az status=0008 Ze status=0009 09:57:45 Check angles 09:57:45 SkyScan query 09:57:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.34<-14556 Statuses=0008 0009 09:57:45 Msec=3750 True Az=112.995 Ze=-38.34 Az status=0008 Ze status=0009 09:57:45 Check angles 09:57:45 SkyScan query 09:57:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.4<-13160 Statuses=0008 0009 09:57:46 Msec=4500 True Az=112.995 Ze=-17.4 Az status=0008 Ze status=0009 09:57:46 Check angles 09:57:46 SkyScan query 09:57:47 SkyScan query done: ret=0 az=112.995<-7533 ze=3.57<-11762 Statuses=0008 0009 09:57:47 Msec=5250 True Az=112.995 Ze=3.57 Az status=0008 Ze status=0009 09:57:47 Check angles 09:57:47 SkyScan query 09:57:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:57:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:57:47 Message to Master queued w/err=0: serial=120074 error=0 09:57:52 Received message from Master: op=Filter serial=120075 09:57:52 Color wheel filter change from 0 to 0 09:57:52 FLIGetFilterPos err=0 currentPosition=0 09:57:52 FLIGetStepsRemaining err=0 RemainingSteps=0 09:57:52 Filter is already there-color wheel unchanged 09:57:53 Received message from Master: op=Shutter serial=120076 09:57:53 Shutter LASER close 09:57:53 Received message from Camera: op=State serial=120078 09:57:53 GetSingleValue result=40 Value=cccccccc 09:57:53 SkyScan query 09:57:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:57:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:53 Parameters OK 09:57:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:53 Set A/D data flow result=40 09:57:53 Set A/D channel type result=40 09:57:53 Set A/D encoding result=40 09:57:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:53 Set channel filter=0.000000e+000 result=40 09:57:53 Config A/D Result=40 09:57:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:53 Get A/D filter: -9.255963e+061 result=40 09:57:53 Get A/D value=-858993460 result=40 09:57:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:53 Parameters OK 09:57:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:53 Set A/D data flow result=40 09:57:53 Set A/D channel type result=40 09:57:53 Set A/D encoding result=40 09:57:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:53 Set channel filter=0.000000e+000 result=40 09:57:53 Config A/D Result=40 09:57:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:53 Get A/D filter: -9.255963e+061 result=40 09:57:53 Get A/D value=-858993460 result=40 09:57:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:57:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:57:53 Aux= 09:57:53 Message to Camera, serial 120078 queued 09:58:30 Received message from Master: op=PointingHead serial=120091 09:58:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:58:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:58:31 Point started: ret=0 09:58:31 point_skyscan result=0 09:58:31 Check angles 09:58:31 SkyScan query 09:58:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:58:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:58:32 Message to Master queued w/err=0: serial=120091 error=0 09:58:37 Received message from Master: op=Filter serial=120092 09:58:37 Color wheel filter change from 0 to 0 09:58:37 FLIGetFilterPos err=0 currentPosition=0 09:58:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:37 Filter is already there-color wheel unchanged 09:58:37 Received message from Master: op=Shutter serial=120093 09:58:37 Shutter LASER close 09:58:37 Received message from Camera: op=State serial=120095 09:58:37 GetSingleValue result=40 Value=cccccccc 09:58:37 SkyScan query 09:58:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:58:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:38 Parameters OK 09:58:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:38 Set A/D data flow result=40 09:58:38 Set A/D channel type result=40 09:58:38 Set A/D encoding result=40 09:58:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:38 Set channel filter=0.000000e+000 result=40 09:58:38 Config A/D Result=40 09:58:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:38 Get A/D filter: -9.255963e+061 result=40 09:58:38 Get A/D value=-858993460 result=40 09:58:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:38 Parameters OK 09:58:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:38 Set A/D data flow result=40 09:58:38 Set A/D channel type result=40 09:58:38 Set A/D encoding result=40 09:58:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:38 Set channel filter=0.000000e+000 result=40 09:58:38 Config A/D Result=40 09:58:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:38 Get A/D filter: -9.255963e+061 result=40 09:58:38 Get A/D value=-858993460 result=40 09:58:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:38 Aux= 09:58:38 Message to Camera, serial 120095 queued 09:59:15 Received message from Master: op=PointingHead serial=120108 09:59:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:59:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:59:15 Point started: ret=0 09:59:15 point_skyscan result=0 09:59:16 Check angles 09:59:16 SkyScan query 09:59:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:59:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:59:16 Message to Master queued w/err=0: serial=120108 error=0 09:59:21 Received message from Master: op=Filter serial=120109 09:59:21 Color wheel filter change from 0 to 0 09:59:21 FLIGetFilterPos err=0 currentPosition=0 09:59:21 FLIGetStepsRemaining err=0 RemainingSteps=0 09:59:21 Filter is already there-color wheel unchanged 09:59:21 Received message from Master: op=Shutter serial=120110 09:59:21 Shutter LASER close 09:59:21 Received message from Camera: op=State serial=120112 09:59:21 GetSingleValue result=40 Value=cccccccc 09:59:21 SkyScan query 09:59:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:59:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:22 Parameters OK 09:59:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:22 Set A/D data flow result=40 09:59:22 Set A/D channel type result=40 09:59:22 Set A/D encoding result=40 09:59:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:22 Set channel filter=0.000000e+000 result=40 09:59:22 Config A/D Result=40 09:59:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:22 Get A/D filter: -9.255963e+061 result=40 09:59:22 Get A/D value=-858993460 result=40 09:59:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:22 Parameters OK 09:59:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:22 Set A/D data flow result=40 09:59:22 Set A/D channel type result=40 09:59:22 Set A/D encoding result=40 09:59:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:22 Set channel filter=0.000000e+000 result=40 09:59:22 Config A/D Result=40 09:59:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:22 Get A/D filter: -9.255963e+061 result=40 09:59:22 Get A/D value=-858993460 result=40 09:59:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:59:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:59:22 Aux= 09:59:22 Message to Camera, serial 120112 queued 09:59:59 Received message from Master: op=PointingHead serial=120125 09:59:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:59:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:59:59 Point started: ret=0 09:59:59 point_skyscan result=0 10:00:00 Check angles 10:00:00 SkyScan query 10:00:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:00:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:00:01 Message to Master queued w/err=0: serial=120125 error=0 10:00:06 Received message from Master: op=Filter serial=120126 10:00:06 Color wheel filter change from 0 to 0 10:00:06 FLIGetFilterPos err=0 currentPosition=0 10:00:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:00:06 Filter is already there-color wheel unchanged 10:00:06 Received message from Master: op=Shutter serial=120127 10:00:06 Shutter LASER close 10:00:06 Received message from Camera: op=State serial=120129 10:00:06 GetSingleValue result=40 Value=cccccccc 10:00:06 SkyScan query 10:00:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:00:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:06 Parameters OK 10:00:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:06 Set A/D data flow result=40 10:00:06 Set A/D channel type result=40 10:00:06 Set A/D encoding result=40 10:00:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:06 Set channel filter=0.000000e+000 result=40 10:00:06 Config A/D Result=40 10:00:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:06 Get A/D filter: -9.255963e+061 result=40 10:00:06 Get A/D value=-858993460 result=40 10:00:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:06 Parameters OK 10:00:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:06 Set A/D data flow result=40 10:00:06 Set A/D channel type result=40 10:00:06 Set A/D encoding result=40 10:00:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:06 Set channel filter=0.000000e+000 result=40 10:00:06 Config A/D Result=40 10:00:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:06 Get A/D filter: -9.255963e+061 result=40 10:00:06 Get A/D value=-858993460 result=40 10:00:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:00:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:00:06 Aux= 10:00:06 Message to Camera, serial 120129 queued 10:00:43 Received message from Master: op=PointingHead serial=120142 10:00:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:00:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:00:44 Point started: ret=0 10:00:44 point_skyscan result=0 10:00:44 Check angles 10:00:44 SkyScan query 10:00:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 10:00:45 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 10:00:45 Check angles 10:00:45 SkyScan query 10:00:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 10:00:46 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 10:00:46 Check angles 10:00:46 SkyScan query 10:00:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 10:00:46 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 10:00:47 Check angles 10:00:47 SkyScan query 10:00:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.52<-17768 Statuses=0008 0009 10:00:47 Msec=2250 True Az=112.995 Ze=-86.52 Az status=0008 Ze status=0009 10:00:47 Check angles 10:00:47 SkyScan query 10:00:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.475<-19165 Statuses=0008 0009 10:00:48 Msec=3000 True Az=112.995 Ze=-107.475 Az status=0008 Ze status=0009 10:00:48 Check angles 10:00:48 SkyScan query 10:00:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.43<-20562 Statuses=0008 0009 10:00:49 Msec=3750 True Az=112.995 Ze=-128.43 Az status=0008 Ze status=0009 10:00:49 Check angles 10:00:49 SkyScan query 10:00:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.43<-21962 Statuses=0008 0009 10:00:49 Msec=4500 True Az=112.995 Ze=-149.43 Az status=0008 Ze status=0009 10:00:50 Check angles 10:00:50 SkyScan query 10:00:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.37<-23358 Statuses=0008 0009 10:00:50 Msec=5250 True Az=112.995 Ze=-170.37 Az status=0008 Ze status=0009 10:00:50 Check angles 10:00:50 SkyScan query 10:00:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:00:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:00:51 Message to Master queued w/err=0: serial=120142 error=0 10:00:56 Received message from Master: op=Filter serial=120143 10:00:56 Color wheel filter change from 0 to 0 10:00:56 FLIGetFilterPos err=0 currentPosition=0 10:00:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:00:56 Filter is already there-color wheel unchanged 10:00:56 Received message from Master: op=Shutter serial=120144 10:00:56 Shutter LASER open 10:00:56 Received message from Camera: op=State serial=120146 10:00:56 GetSingleValue result=40 Value=cccccccc 10:00:56 SkyScan query 10:00:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:00:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:57 Parameters OK 10:00:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:57 Set A/D data flow result=40 10:00:57 Set A/D channel type result=40 10:00:57 Set A/D encoding result=40 10:00:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:57 Set channel filter=0.000000e+000 result=40 10:00:57 Config A/D Result=40 10:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:57 Get A/D filter: -9.255963e+061 result=40 10:00:57 Get A/D value=-858993460 result=40 10:00:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:57 Parameters OK 10:00:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:57 Set A/D data flow result=40 10:00:57 Set A/D channel type result=40 10:00:57 Set A/D encoding result=40 10:00:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:57 Set channel filter=0.000000e+000 result=40 10:00:57 Config A/D Result=40 10:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:57 Get A/D filter: -9.255963e+061 result=40 10:00:57 Get A/D value=-858993460 result=40 10:00:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:00:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:00:57 Aux= 10:00:57 Message to Camera, serial 120146 queued 10:01:05 Received message from Master: op=Shutter serial=120156 10:01:05 Shutter LASER close 10:01:06 Received message from Master: op=PointingHead serial=120160 10:01:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:01:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:01:06 Point started: ret=0 10:01:06 point_skyscan result=0 10:01:07 Check angles 10:01:07 SkyScan query 10:01:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 10:01:08 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 10:01:08 Check angles 10:01:08 SkyScan query 10:01:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 10:01:08 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 10:01:08 Check angles 10:01:08 SkyScan query 10:01:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.445<-18763 Statuses=0008 0009 10:01:09 Msec=1500 True Az=112.995 Ze=-101.445 Az status=0008 Ze status=0009 10:01:09 Check angles 10:01:09 SkyScan query 10:01:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.01<-17334 Statuses=0008 0009 10:01:10 Msec=2250 True Az=112.995 Ze=-80.01 Az status=0008 Ze status=0009 10:01:10 Check angles 10:01:10 SkyScan query 10:01:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.07<-15938 Statuses=0008 0009 10:01:11 Msec=3000 True Az=112.995 Ze=-59.07 Az status=0008 Ze status=0009 10:01:11 Check angles 10:01:11 SkyScan query 10:01:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.04<-14536 Statuses=0008 0009 10:01:11 Msec=3750 True Az=112.995 Ze=-38.04 Az status=0008 Ze status=0009 10:01:11 Check angles 10:01:11 SkyScan query 10:01:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.1<-13140 Statuses=0008 0009 10:01:12 Msec=4500 True Az=112.995 Ze=-17.1 Az status=0008 Ze status=0009 10:01:12 Check angles 10:01:12 SkyScan query 10:01:13 SkyScan query done: ret=0 az=112.995<-7533 ze=3.855<-11743 Statuses=0008 0009 10:01:13 Msec=5250 True Az=112.995 Ze=3.855 Az status=0008 Ze status=0009 10:01:13 Check angles 10:01:13 SkyScan query 10:01:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:01:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:01:14 Message to Master queued w/err=0: serial=120160 error=0 10:01:19 Received message from Master: op=Filter serial=120161 10:01:19 Color wheel filter change from 0 to 0 10:01:19 FLIGetFilterPos err=0 currentPosition=0 10:01:19 FLIGetStepsRemaining err=0 RemainingSteps=0 10:01:19 Filter is already there-color wheel unchanged 10:01:19 Received message from Master: op=Shutter serial=120162 10:01:19 Shutter LASER close 10:01:19 Received message from Camera: op=State serial=120164 10:01:19 GetSingleValue result=40 Value=cccccccc 10:01:19 SkyScan query 10:01:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:01:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:19 Parameters OK 10:01:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:19 Set A/D data flow result=40 10:01:19 Set A/D channel type result=40 10:01:19 Set A/D encoding result=40 10:01:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:19 Set channel filter=0.000000e+000 result=40 10:01:19 Config A/D Result=40 10:01:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:19 Get A/D filter: -9.255963e+061 result=40 10:01:19 Get A/D value=-858993460 result=40 10:01:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:19 Parameters OK 10:01:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:19 Set A/D data flow result=40 10:01:19 Set A/D channel type result=40 10:01:19 Set A/D encoding result=40 10:01:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:19 Set channel filter=0.000000e+000 result=40 10:01:19 Config A/D Result=40 10:01:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:19 Get A/D filter: -9.255963e+061 result=40 10:01:19 Get A/D value=-858993460 result=40 10:01:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:01:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:01:19 Aux= 10:01:19 Message to Camera, serial 120164 queued 10:01:56 Received message from Master: op=PointingHead serial=120177 10:01:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:01:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:01:57 Point started: ret=0 10:01:57 point_skyscan result=0 10:01:57 Check angles 10:01:57 SkyScan query 10:01:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:01:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:01:58 Message to Master queued w/err=0: serial=120177 error=0 10:02:03 Received message from Master: op=Filter serial=120178 10:02:03 Color wheel filter change from 0 to 0 10:02:03 FLIGetFilterPos err=0 currentPosition=0 10:02:03 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:03 Filter is already there-color wheel unchanged 10:02:03 Received message from Master: op=Shutter serial=120179 10:02:03 Shutter LASER close 10:02:03 Received message from Camera: op=State serial=120181 10:02:03 GetSingleValue result=40 Value=cccccccc 10:02:03 SkyScan query 10:02:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:02:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:04 Parameters OK 10:02:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:04 Set A/D data flow result=40 10:02:04 Set A/D channel type result=40 10:02:04 Set A/D encoding result=40 10:02:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:04 Set channel filter=0.000000e+000 result=40 10:02:04 Config A/D Result=40 10:02:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:04 Get A/D filter: -9.255963e+061 result=40 10:02:04 Get A/D value=-858993460 result=40 10:02:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:04 Parameters OK 10:02:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:04 Set A/D data flow result=40 10:02:04 Set A/D channel type result=40 10:02:04 Set A/D encoding result=40 10:02:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:04 Set channel filter=0.000000e+000 result=40 10:02:04 Config A/D Result=40 10:02:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:04 Get A/D filter: -9.255963e+061 result=40 10:02:04 Get A/D value=-858993460 result=40 10:02:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:04 Aux= 10:02:04 Message to Camera, serial 120181 queued 10:02:41 Received message from Master: op=PointingHead serial=120194 10:02:41 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:02:41 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:02:41 Point started: ret=0 10:02:41 point_skyscan result=0 10:02:42 Check angles 10:02:42 SkyScan query 10:02:42 SkyScan query done: ret=0 az=136.23<-9082 ze=-6.51<-12434 Statuses=0009 0008 10:02:42 Msec=0 True Az=136.23 Ze=-6.51 Az status=0009 Ze status=0008 10:02:42 Check angles 10:02:42 SkyScan query 10:02:43 SkyScan query done: ret=0 az=153.75<-10250 ze=-6.495<-12433 Statuses=0009 0008 10:02:43 Msec=750 True Az=153.75 Ze=-6.495 Az status=0009 Ze status=0008 10:02:43 Check angles 10:02:43 SkyScan query 10:02:44 SkyScan query done: ret=0 az=171.15<-11410 ze=-6.495<-12433 Statuses=0009 0008 10:02:44 Msec=1500 True Az=171.15 Ze=-6.495 Az status=0009 Ze status=0008 10:02:44 Check angles 10:02:44 SkyScan query 10:02:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:02:45 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:02:45 Message to Master queued w/err=0: serial=120194 error=0 10:02:50 Received message from Master: op=Filter serial=120195 10:02:50 Color wheel filter change from 0 to 0 10:02:50 FLIGetFilterPos err=0 currentPosition=0 10:02:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:50 Filter is already there-color wheel unchanged 10:02:50 Received message from Master: op=Shutter serial=120196 10:02:50 Shutter LASER close 10:02:50 Received message from Camera: op=State serial=120198 10:02:50 GetSingleValue result=40 Value=cccccccc 10:02:50 SkyScan query 10:02:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:02:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:50 Parameters OK 10:02:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:50 Set A/D data flow result=40 10:02:50 Set A/D channel type result=40 10:02:50 Set A/D encoding result=40 10:02:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:50 Set channel filter=0.000000e+000 result=40 10:02:50 Config A/D Result=40 10:02:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:50 Get A/D filter: -9.255963e+061 result=40 10:02:50 Get A/D value=-858993460 result=40 10:02:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:50 Parameters OK 10:02:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:50 Set A/D data flow result=40 10:02:50 Set A/D channel type result=40 10:02:50 Set A/D encoding result=40 10:02:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:50 Set channel filter=0.000000e+000 result=40 10:02:50 Config A/D Result=40 10:02:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:50 Get A/D filter: -9.255963e+061 result=40 10:02:50 Get A/D value=-858993460 result=40 10:02:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:50 Aux= 10:02:50 Message to Camera, serial 120198 queued 10:03:27 Received message from Master: op=PointingHead serial=120211 10:03:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:03:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:03:28 Point started: ret=0 10:03:28 point_skyscan result=0 10:03:28 Check angles 10:03:28 SkyScan query 10:03:29 SkyScan query done: ret=0 az=153.18<-10212 ze=6.51<-11566 Statuses=0009 0008 10:03:29 Msec=0 True Az=153.18 Ze=6.51 Az status=0009 Ze status=0008 10:03:29 Check angles 10:03:29 SkyScan query 10:03:30 SkyScan query done: ret=0 az=135.33<-9022 ze=6.495<-11567 Statuses=0009 0008 10:03:30 Msec=750 True Az=135.33 Ze=6.495 Az status=0009 Ze status=0008 10:03:30 Check angles 10:03:30 SkyScan query 10:03:30 SkyScan query done: ret=0 az=117.885<-7859 ze=6.495<-11567 Statuses=0009 0008 10:03:30 Msec=1500 True Az=117.885 Ze=6.495 Az status=0009 Ze status=0008 10:03:31 Check angles 10:03:31 SkyScan query 10:03:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:03:31 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:03:31 Message to Master queued w/err=0: serial=120211 error=0 10:03:36 Received message from Master: op=Filter serial=120212 10:03:36 Color wheel filter change from 0 to 0 10:03:36 FLIGetFilterPos err=0 currentPosition=0 10:03:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:03:36 Filter is already there-color wheel unchanged 10:03:36 Received message from Master: op=Shutter serial=120213 10:03:36 Shutter LASER close 10:03:36 Received message from Camera: op=State serial=120215 10:03:36 GetSingleValue result=40 Value=cccccccc 10:03:36 SkyScan query 10:03:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:03:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:37 Parameters OK 10:03:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:37 Set A/D data flow result=40 10:03:37 Set A/D channel type result=40 10:03:37 Set A/D encoding result=40 10:03:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:37 Set channel filter=0.000000e+000 result=40 10:03:37 Config A/D Result=40 10:03:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:37 Get A/D filter: -9.255963e+061 result=40 10:03:37 Get A/D value=-858993460 result=40 10:03:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:37 Parameters OK 10:03:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:37 Set A/D data flow result=40 10:03:37 Set A/D channel type result=40 10:03:37 Set A/D encoding result=40 10:03:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:37 Set channel filter=0.000000e+000 result=40 10:03:37 Config A/D Result=40 10:03:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:37 Get A/D filter: -9.255963e+061 result=40 10:03:37 Get A/D value=-858993460 result=40 10:03:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:03:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:03:37 Aux= 10:03:37 Message to Camera, serial 120215 queued 10:03:38 Received message from Master: op=Identify serial=120216 [UTC 2019-3-5 10:03:50] 10:04:14 Received message from Master: op=PointingHead serial=120231 10:04:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:04:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:04:14 Point started: ret=0 10:04:14 point_skyscan result=0 10:04:15 Check angles 10:04:15 SkyScan query 10:04:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 10:04:15 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 10:04:16 Check angles 10:04:16 SkyScan query 10:04:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.64<-14976 Statuses=0008 0009 10:04:16 Msec=750 True Az=112.995 Ze=-44.64 Az status=0008 Ze status=0009 10:04:16 Check angles 10:04:16 SkyScan query 10:04:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.595<-16373 Statuses=0008 0009 10:04:17 Msec=1500 True Az=112.995 Ze=-65.595 Az status=0008 Ze status=0009 10:04:17 Check angles 10:04:17 SkyScan query 10:04:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.55<-17770 Statuses=0008 0009 10:04:18 Msec=2250 True Az=112.995 Ze=-86.55 Az status=0008 Ze status=0009 10:04:18 Check angles 10:04:18 SkyScan query 10:04:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.52<-19168 Statuses=0008 0009 10:04:18 Msec=3000 True Az=112.995 Ze=-107.52 Az status=0008 Ze status=0009 10:04:19 Check angles 10:04:19 SkyScan query 10:04:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.46<-20564 Statuses=0008 0009 10:04:19 Msec=3750 True Az=112.995 Ze=-128.46 Az status=0008 Ze status=0009 10:04:19 Check angles 10:04:19 SkyScan query 10:04:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.49<-21966 Statuses=0008 0009 10:04:20 Msec=4500 True Az=112.995 Ze=-149.49 Az status=0008 Ze status=0009 10:04:20 Check angles 10:04:20 SkyScan query 10:04:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.415<-23361 Statuses=0008 0009 10:04:21 Msec=5250 True Az=112.995 Ze=-170.415 Az status=0008 Ze status=0009 10:04:21 Check angles 10:04:21 SkyScan query 10:04:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:04:21 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:04:21 Message to Master queued w/err=0: serial=120231 error=0 10:04:26 Received message from Master: op=Filter serial=120232 10:04:26 Color wheel filter change from 0 to 0 10:04:26 FLIGetFilterPos err=0 currentPosition=0 10:04:26 FLIGetStepsRemaining err=0 RemainingSteps=0 10:04:26 Filter is already there-color wheel unchanged 10:04:27 Received message from Master: op=Shutter serial=120233 10:04:27 Shutter LASER open 10:04:27 Received message from Camera: op=State serial=120235 10:04:27 GetSingleValue result=40 Value=cccccccc 10:04:27 SkyScan query 10:04:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:04:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:27 Parameters OK 10:04:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:27 Set A/D data flow result=40 10:04:27 Set A/D channel type result=40 10:04:27 Set A/D encoding result=40 10:04:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:27 Set channel filter=0.000000e+000 result=40 10:04:27 Config A/D Result=40 10:04:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:27 Get A/D filter: -9.255963e+061 result=40 10:04:27 Get A/D value=-858993460 result=40 10:04:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:27 Parameters OK 10:04:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:27 Set A/D data flow result=40 10:04:27 Set A/D channel type result=40 10:04:27 Set A/D encoding result=40 10:04:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:27 Set channel filter=0.000000e+000 result=40 10:04:27 Config A/D Result=40 10:04:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:27 Get A/D filter: -9.255963e+061 result=40 10:04:27 Get A/D value=-858993460 result=40 10:04:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:04:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:04:27 Aux= 10:04:27 Message to Camera, serial 120235 queued 10:04:36 Received message from Master: op=Shutter serial=120245 10:04:36 Shutter LASER close 10:04:36 Received message from Master: op=PointingHead serial=120249 10:04:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:04:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:04:37 Point started: ret=0 10:04:37 point_skyscan result=0 10:04:37 Check angles 10:04:37 SkyScan query 10:04:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.875<-21525 Statuses=0008 0009 10:04:38 Msec=0 True Az=112.995 Ze=-142.875 Az status=0008 Ze status=0009 10:04:38 Check angles 10:04:38 SkyScan query 10:04:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.44<-20096 Statuses=0008 0009 10:04:39 Msec=750 True Az=112.995 Ze=-121.44 Az status=0008 Ze status=0009 10:04:39 Check angles 10:04:39 SkyScan query 10:04:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.47<-18698 Statuses=0008 0009 10:04:39 Msec=1500 True Az=112.995 Ze=-100.47 Az status=0008 Ze status=0009 10:04:40 Check angles 10:04:40 SkyScan query 10:04:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.485<-17299 Statuses=0008 0009 10:04:40 Msec=2250 True Az=112.995 Ze=-79.485 Az status=0008 Ze status=0009 10:04:40 Check angles 10:04:40 SkyScan query 10:04:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.11<-15874 Statuses=0008 0009 10:04:41 Msec=3000 True Az=112.995 Ze=-58.11 Az status=0008 Ze status=0009 10:04:41 Check angles 10:04:41 SkyScan query 10:04:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.23<-14482 Statuses=0008 0009 10:04:42 Msec=3750 True Az=112.995 Ze=-37.23 Az status=0008 Ze status=0009 10:04:42 Check angles 10:04:42 SkyScan query 10:04:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.26<-13084 Statuses=0008 0009 10:04:42 Msec=4500 True Az=112.995 Ze=-16.26 Az status=0008 Ze status=0009 10:04:43 Check angles 10:04:43 SkyScan query 10:04:43 SkyScan query done: ret=0 az=112.995<-7533 ze=4.56<-11696 Statuses=0008 0009 10:04:43 Msec=5250 True Az=112.995 Ze=4.56 Az status=0008 Ze status=0009 10:04:43 Check angles 10:04:43 SkyScan query 10:04:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:04:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:04:44 Message to Master queued w/err=0: serial=120249 error=0 10:04:49 Received message from Master: op=Filter serial=120250 10:04:49 Color wheel filter change from 0 to 0 10:04:49 FLIGetFilterPos err=0 currentPosition=0 10:04:49 FLIGetStepsRemaining err=0 RemainingSteps=0 10:04:49 Filter is already there-color wheel unchanged 10:04:49 Received message from Master: op=Shutter serial=120251 10:04:49 Shutter LASER close 10:04:49 Received message from Camera: op=State serial=120253 10:04:49 GetSingleValue result=40 Value=cccccccc 10:04:49 SkyScan query 10:04:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:04:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:50 Parameters OK 10:04:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:50 Set A/D data flow result=40 10:04:50 Set A/D channel type result=40 10:04:50 Set A/D encoding result=40 10:04:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:50 Set channel filter=0.000000e+000 result=40 10:04:50 Config A/D Result=40 10:04:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:50 Get A/D filter: -9.255963e+061 result=40 10:04:50 Get A/D value=-858993460 result=40 10:04:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:50 Parameters OK 10:04:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:50 Set A/D data flow result=40 10:04:50 Set A/D channel type result=40 10:04:50 Set A/D encoding result=40 10:04:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:50 Set channel filter=0.000000e+000 result=40 10:04:50 Config A/D Result=40 10:04:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:50 Get A/D filter: -9.255963e+061 result=40 10:04:50 Get A/D value=-858993460 result=40 10:04:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:04:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:04:50 Aux= 10:04:50 Message to Camera, serial 120253 queued 10:05:27 Received message from Master: op=PointingHead serial=120266 10:05:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:05:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:05:27 Point started: ret=0 10:05:27 point_skyscan result=0 10:05:28 Check angles 10:05:28 SkyScan query 10:05:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:05:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:05:28 Message to Master queued w/err=0: serial=120266 error=0 10:05:33 Received message from Master: op=Filter serial=120267 10:05:33 Color wheel filter change from 0 to 0 10:05:33 FLIGetFilterPos err=0 currentPosition=0 10:05:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:05:33 Filter is already there-color wheel unchanged 10:05:34 Received message from Master: op=Shutter serial=120268 10:05:34 Shutter LASER close 10:05:34 Received message from Camera: op=State serial=120270 10:05:34 GetSingleValue result=40 Value=cccccccc 10:05:34 SkyScan query 10:05:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:05:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:34 Parameters OK 10:05:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:34 Set A/D data flow result=40 10:05:34 Set A/D channel type result=40 10:05:34 Set A/D encoding result=40 10:05:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:34 Set channel filter=0.000000e+000 result=40 10:05:34 Config A/D Result=40 10:05:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:34 Get A/D filter: -9.255963e+061 result=40 10:05:34 Get A/D value=-858993460 result=40 10:05:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:34 Parameters OK 10:05:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:34 Set A/D data flow result=40 10:05:34 Set A/D channel type result=40 10:05:34 Set A/D encoding result=40 10:05:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:34 Set channel filter=0.000000e+000 result=40 10:05:34 Config A/D Result=40 10:05:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:34 Get A/D filter: -9.255963e+061 result=40 10:05:34 Get A/D value=-858993460 result=40 10:05:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:05:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:05:34 Aux= 10:05:34 Message to Camera, serial 120270 queued 10:06:11 Received message from Master: op=PointingHead serial=120283 10:06:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:06:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:06:11 Point started: ret=0 10:06:11 point_skyscan result=0 10:06:12 Check angles 10:06:12 SkyScan query 10:06:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:06:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:06:13 Message to Master queued w/err=0: serial=120283 error=0 10:06:18 Received message from Master: op=Filter serial=120284 10:06:18 Color wheel filter change from 0 to 0 10:06:18 FLIGetFilterPos err=0 currentPosition=0 10:06:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:06:18 Filter is already there-color wheel unchanged 10:06:18 Received message from Master: op=Shutter serial=120285 10:06:18 Shutter LASER close 10:06:18 Received message from Camera: op=State serial=120287 10:06:18 GetSingleValue result=40 Value=cccccccc 10:06:18 SkyScan query 10:06:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:06:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:19 Parameters OK 10:06:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:19 Set A/D data flow result=40 10:06:19 Set A/D channel type result=40 10:06:19 Set A/D encoding result=40 10:06:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:19 Set channel filter=0.000000e+000 result=40 10:06:19 Config A/D Result=40 10:06:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:19 Get A/D filter: -9.255963e+061 result=40 10:06:19 Get A/D value=-858993460 result=40 10:06:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:19 Parameters OK 10:06:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:19 Set A/D data flow result=40 10:06:19 Set A/D channel type result=40 10:06:19 Set A/D encoding result=40 10:06:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:19 Set channel filter=0.000000e+000 result=40 10:06:19 Config A/D Result=40 10:06:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:19 Get A/D filter: -9.255963e+061 result=40 10:06:19 Get A/D value=-858993460 result=40 10:06:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:06:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:06:19 Aux= 10:06:19 Message to Camera, serial 120287 queued 10:06:55 Received message from Master: op=PointingHead serial=120300 10:06:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:06:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:06:56 Point started: ret=0 10:06:56 point_skyscan result=0 10:06:56 Check angles 10:06:56 SkyScan query 10:06:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:06:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:06:57 Message to Master queued w/err=0: serial=120300 error=0 10:07:02 Received message from Master: op=Filter serial=120301 10:07:02 Color wheel filter change from 0 to 0 10:07:02 FLIGetFilterPos err=0 currentPosition=0 10:07:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:02 Filter is already there-color wheel unchanged 10:07:02 Received message from Master: op=Shutter serial=120302 10:07:02 Shutter LASER close 10:07:02 Received message from Camera: op=State serial=120304 10:07:02 GetSingleValue result=40 Value=cccccccc 10:07:02 SkyScan query 10:07:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:07:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:03 Parameters OK 10:07:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:03 Set A/D data flow result=40 10:07:03 Set A/D channel type result=40 10:07:03 Set A/D encoding result=40 10:07:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:03 Set channel filter=0.000000e+000 result=40 10:07:03 Config A/D Result=40 10:07:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:03 Get A/D filter: -9.255963e+061 result=40 10:07:03 Get A/D value=-858993460 result=40 10:07:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:03 Parameters OK 10:07:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:03 Set A/D data flow result=40 10:07:03 Set A/D channel type result=40 10:07:03 Set A/D encoding result=40 10:07:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:03 Set channel filter=0.000000e+000 result=40 10:07:03 Config A/D Result=40 10:07:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:03 Get A/D filter: -9.255963e+061 result=40 10:07:03 Get A/D value=-858993460 result=40 10:07:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:03 Aux= 10:07:03 Message to Camera, serial 120304 queued 10:07:40 Received message from Master: op=PointingHead serial=120317 10:07:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:07:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:07:40 Point started: ret=0 10:07:40 point_skyscan result=0 10:07:41 Check angles 10:07:41 SkyScan query 10:07:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 10:07:41 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 10:07:41 Check angles 10:07:41 SkyScan query 10:07:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.07<-14938 Statuses=0008 0009 10:07:42 Msec=750 True Az=112.995 Ze=-44.07 Az status=0008 Ze status=0009 10:07:42 Check angles 10:07:42 SkyScan query 10:07:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.995<-16333 Statuses=0008 0009 10:07:43 Msec=1500 True Az=112.995 Ze=-64.995 Az status=0008 Ze status=0009 10:07:43 Check angles 10:07:43 SkyScan query 10:07:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.935<-17729 Statuses=0008 0009 10:07:44 Msec=2250 True Az=112.995 Ze=-85.935 Az status=0008 Ze status=0009 10:07:44 Check angles 10:07:44 SkyScan query 10:07:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.875<-19125 Statuses=0008 0009 10:07:44 Msec=3000 True Az=112.995 Ze=-106.875 Az status=0008 Ze status=0009 10:07:44 Check angles 10:07:44 SkyScan query 10:07:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.815<-20521 Statuses=0008 0009 10:07:45 Msec=3750 True Az=112.995 Ze=-127.815 Az status=0008 Ze status=0009 10:07:45 Check angles 10:07:45 SkyScan query 10:07:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.755<-21917 Statuses=0008 0009 10:07:46 Msec=4500 True Az=112.995 Ze=-148.755 Az status=0008 Ze status=0009 10:07:46 Check angles 10:07:46 SkyScan query 10:07:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.695<-23313 Statuses=0008 0009 10:07:47 Msec=5250 True Az=112.995 Ze=-169.695 Az status=0008 Ze status=0009 10:07:47 Check angles 10:07:47 SkyScan query 10:07:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:07:47 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:07:47 Message to Master queued w/err=0: serial=120317 error=0 10:07:52 Received message from Master: op=Filter serial=120318 10:07:52 Color wheel filter change from 0 to 0 10:07:52 FLIGetFilterPos err=0 currentPosition=0 10:07:52 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:52 Filter is already there-color wheel unchanged 10:07:52 Received message from Master: op=Shutter serial=120319 10:07:52 Shutter LASER open 10:07:53 Received message from Camera: op=State serial=120321 10:07:53 GetSingleValue result=40 Value=cccccccc 10:07:53 SkyScan query 10:07:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:07:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:53 Parameters OK 10:07:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:53 Set A/D data flow result=40 10:07:53 Set A/D channel type result=40 10:07:53 Set A/D encoding result=40 10:07:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:53 Set channel filter=0.000000e+000 result=40 10:07:53 Config A/D Result=40 10:07:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:53 Get A/D filter: -9.255963e+061 result=40 10:07:53 Get A/D value=-858993460 result=40 10:07:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:53 Parameters OK 10:07:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:53 Set A/D data flow result=40 10:07:53 Set A/D channel type result=40 10:07:53 Set A/D encoding result=40 10:07:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:53 Set channel filter=0.000000e+000 result=40 10:07:53 Config A/D Result=40 10:07:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:53 Get A/D filter: -9.255963e+061 result=40 10:07:53 Get A/D value=-858993460 result=40 10:07:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:53 Aux= 10:07:53 Message to Camera, serial 120321 queued 10:08:02 Received message from Master: op=Shutter serial=120331 10:08:02 Shutter LASER close 10:08:02 Received message from Master: op=PointingHead serial=120335 10:08:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:08:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:08:03 Point started: ret=0 10:08:03 point_skyscan result=0 10:08:03 Check angles 10:08:03 SkyScan query 10:08:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 10:08:04 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 10:08:04 Check angles 10:08:04 SkyScan query 10:08:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.415<-20161 Statuses=0008 0009 10:08:05 Msec=750 True Az=112.995 Ze=-122.415 Az status=0008 Ze status=0009 10:08:05 Check angles 10:08:05 SkyScan query 10:08:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.46<-18764 Statuses=0008 0009 10:08:05 Msec=1500 True Az=112.995 Ze=-101.46 Az status=0008 Ze status=0009 10:08:06 Check angles 10:08:06 SkyScan query 10:08:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.04<-17336 Statuses=0008 0009 10:08:06 Msec=2250 True Az=112.995 Ze=-80.04 Az status=0008 Ze status=0009 10:08:06 Check angles 10:08:06 SkyScan query 10:08:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.1<-15940 Statuses=0008 0009 10:08:07 Msec=3000 True Az=112.995 Ze=-59.1 Az status=0008 Ze status=0009 10:08:07 Check angles 10:08:07 SkyScan query 10:08:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.07<-14538 Statuses=0008 0009 10:08:08 Msec=3750 True Az=112.995 Ze=-38.07 Az status=0008 Ze status=0009 10:08:08 Check angles 10:08:08 SkyScan query 10:08:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.695<-13113 Statuses=0008 0009 10:08:08 Msec=4500 True Az=112.995 Ze=-16.695 Az status=0008 Ze status=0009 10:08:09 Check angles 10:08:09 SkyScan query 10:08:09 SkyScan query done: ret=0 az=113.01<-7534 ze=4.215<-11719 Statuses=0008 0009 10:08:09 Msec=5250 True Az=113.01 Ze=4.215 Az status=0008 Ze status=0009 10:08:09 Check angles 10:08:09 SkyScan query 10:08:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:08:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:08:10 Message to Master queued w/err=0: serial=120335 error=0 10:08:15 Received message from Master: op=Filter serial=120336 10:08:15 Color wheel filter change from 0 to 0 10:08:15 FLIGetFilterPos err=0 currentPosition=0 10:08:15 FLIGetStepsRemaining err=0 RemainingSteps=0 10:08:15 Filter is already there-color wheel unchanged 10:08:15 Received message from Master: op=Shutter serial=120337 10:08:15 Shutter LASER close 10:08:15 Received message from Camera: op=State serial=120339 10:08:15 GetSingleValue result=40 Value=cccccccc 10:08:15 SkyScan query 10:08:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:08:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:16 Parameters OK 10:08:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:16 Set A/D data flow result=40 10:08:16 Set A/D channel type result=40 10:08:16 Set A/D encoding result=40 10:08:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:16 Set channel filter=0.000000e+000 result=40 10:08:16 Config A/D Result=40 10:08:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:16 Get A/D filter: -9.255963e+061 result=40 10:08:16 Get A/D value=-858993460 result=40 10:08:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:16 Parameters OK 10:08:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:16 Set A/D data flow result=40 10:08:16 Set A/D channel type result=40 10:08:16 Set A/D encoding result=40 10:08:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:16 Set channel filter=0.000000e+000 result=40 10:08:16 Config A/D Result=40 10:08:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:16 Get A/D filter: -9.255963e+061 result=40 10:08:16 Get A/D value=-858993460 result=40 10:08:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:08:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:08:16 Aux= 10:08:16 Message to Camera, serial 120339 queued 10:08:53 Received message from Master: op=PointingHead serial=120352 10:08:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:08:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:08:53 Point started: ret=0 10:08:53 point_skyscan result=0 10:08:54 Check angles 10:08:54 SkyScan query 10:08:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:08:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:08:54 Message to Master queued w/err=0: serial=120352 error=0 10:08:59 Received message from Master: op=Filter serial=120353 10:08:59 Color wheel filter change from 0 to 0 10:08:59 FLIGetFilterPos err=0 currentPosition=0 10:08:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:08:59 Filter is already there-color wheel unchanged 10:09:00 Received message from Master: op=Shutter serial=120354 10:09:00 Shutter LASER close 10:09:00 Received message from Camera: op=State serial=120356 10:09:00 GetSingleValue result=40 Value=cccccccc 10:09:00 SkyScan query 10:09:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:09:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:00 Parameters OK 10:09:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:00 Set A/D data flow result=40 10:09:00 Set A/D channel type result=40 10:09:00 Set A/D encoding result=40 10:09:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:00 Set channel filter=0.000000e+000 result=40 10:09:00 Config A/D Result=40 10:09:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:00 Get A/D filter: -9.255963e+061 result=40 10:09:00 Get A/D value=-858993460 result=40 10:09:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:00 Parameters OK 10:09:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:00 Set A/D data flow result=40 10:09:00 Set A/D channel type result=40 10:09:00 Set A/D encoding result=40 10:09:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:00 Set channel filter=0.000000e+000 result=40 10:09:00 Config A/D Result=40 10:09:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:00 Get A/D filter: -9.255963e+061 result=40 10:09:00 Get A/D value=-858993460 result=40 10:09:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:00 Aux= 10:09:00 Message to Camera, serial 120356 queued 10:09:37 Received message from Master: op=PointingHead serial=120369 10:09:37 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:09:37 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:09:37 Point started: ret=0 10:09:37 point_skyscan result=0 10:09:38 Check angles 10:09:38 SkyScan query 10:09:39 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 10:09:39 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 10:09:39 Check angles 10:09:39 SkyScan query 10:09:39 SkyScan query done: ret=0 az=153.51<-10234 ze=-6.495<-12433 Statuses=0009 0008 10:09:39 Msec=750 True Az=153.51 Ze=-6.495 Az status=0009 Ze status=0008 10:09:40 Check angles 10:09:40 SkyScan query 10:09:40 SkyScan query done: ret=0 az=171<-11400 ze=-6.495<-12433 Statuses=0009 0008 10:09:40 Msec=1500 True Az=171 Ze=-6.495 Az status=0009 Ze status=0008 10:09:40 Check angles 10:09:40 SkyScan query 10:09:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:09:41 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:09:41 Message to Master queued w/err=0: serial=120369 error=0 10:09:46 Received message from Master: op=Filter serial=120370 10:09:46 Color wheel filter change from 0 to 0 10:09:46 FLIGetFilterPos err=0 currentPosition=0 10:09:46 FLIGetStepsRemaining err=0 RemainingSteps=0 10:09:46 Filter is already there-color wheel unchanged 10:09:46 Received message from Master: op=Shutter serial=120371 10:09:46 Shutter LASER close 10:09:46 Received message from Camera: op=State serial=120373 10:09:46 GetSingleValue result=40 Value=cccccccc 10:09:46 SkyScan query 10:09:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:09:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:47 Parameters OK 10:09:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:47 Set A/D data flow result=40 10:09:47 Set A/D channel type result=40 10:09:47 Set A/D encoding result=40 10:09:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:47 Set channel filter=0.000000e+000 result=40 10:09:47 Config A/D Result=40 10:09:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:47 Get A/D filter: -9.255963e+061 result=40 10:09:47 Get A/D value=-858993460 result=40 10:09:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:47 Parameters OK 10:09:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:47 Set A/D data flow result=40 10:09:47 Set A/D channel type result=40 10:09:47 Set A/D encoding result=40 10:09:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:47 Set channel filter=0.000000e+000 result=40 10:09:47 Config A/D Result=40 10:09:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:47 Get A/D filter: -9.255963e+061 result=40 10:09:47 Get A/D value=-858993460 result=40 10:09:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:47 Aux= 10:09:47 Message to Camera, serial 120373 queued 10:10:24 Received message from Master: op=PointingHead serial=120386 10:10:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:10:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:10:24 Point started: ret=0 10:10:24 point_skyscan result=0 10:10:25 Check angles 10:10:25 SkyScan query 10:10:25 SkyScan query done: ret=0 az=152.565<-10171 ze=6.51<-11566 Statuses=0009 0008 10:10:25 Msec=0 True Az=152.565 Ze=6.51 Az status=0009 Ze status=0008 10:10:26 Check angles 10:10:26 SkyScan query 10:10:26 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 10:10:26 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 10:10:26 Check angles 10:10:26 SkyScan query 10:10:27 SkyScan query done: ret=0 az=117.66<-7844 ze=6.495<-11567 Statuses=0009 0008 10:10:27 Msec=1500 True Az=117.66 Ze=6.495 Az status=0009 Ze status=0008 10:10:27 Check angles 10:10:27 SkyScan query 10:10:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:10:28 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:10:28 Message to Master queued w/err=0: serial=120386 error=0 10:10:33 Received message from Master: op=Filter serial=120387 10:10:33 Color wheel filter change from 0 to 0 10:10:33 FLIGetFilterPos err=0 currentPosition=0 10:10:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:10:33 Filter is already there-color wheel unchanged 10:10:33 Received message from Master: op=Shutter serial=120388 10:10:33 Shutter LASER close 10:10:33 Received message from Camera: op=State serial=120390 10:10:33 GetSingleValue result=40 Value=cccccccc 10:10:33 SkyScan query 10:10:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:10:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:33 Parameters OK 10:10:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:33 Set A/D data flow result=40 10:10:33 Set A/D channel type result=40 10:10:33 Set A/D encoding result=40 10:10:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:33 Set channel filter=0.000000e+000 result=40 10:10:33 Config A/D Result=40 10:10:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:33 Get A/D filter: -9.255963e+061 result=40 10:10:33 Get A/D value=-858993460 result=40 10:10:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:33 Parameters OK 10:10:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:33 Set A/D data flow result=40 10:10:33 Set A/D channel type result=40 10:10:33 Set A/D encoding result=40 10:10:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:33 Set channel filter=0.000000e+000 result=40 10:10:33 Config A/D Result=40 10:10:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:33 Get A/D filter: -9.255963e+061 result=40 10:10:33 Get A/D value=-858993460 result=40 10:10:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:10:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:10:33 Aux= 10:10:33 Message to Camera, serial 120390 queued 10:11:10 Received message from Master: op=PointingHead serial=120403 10:11:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:11:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:11:11 Point started: ret=0 10:11:11 point_skyscan result=0 10:11:11 Check angles 10:11:11 SkyScan query 10:11:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.13<-13542 Statuses=0008 0009 10:11:12 Msec=0 True Az=112.995 Ze=-23.13 Az status=0008 Ze status=0009 10:11:12 Check angles 10:11:12 SkyScan query 10:11:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 10:11:13 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 10:11:13 Check angles 10:11:13 SkyScan query 10:11:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.43<-16362 Statuses=0008 0009 10:11:13 Msec=1500 True Az=112.995 Ze=-65.43 Az status=0008 Ze status=0009 10:11:14 Check angles 10:11:14 SkyScan query 10:11:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 10:11:14 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 10:11:14 Check angles 10:11:14 SkyScan query 10:11:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.82<-19188 Statuses=0008 0009 10:11:15 Msec=3000 True Az=112.995 Ze=-107.82 Az status=0008 Ze status=0009 10:11:15 Check angles 10:11:15 SkyScan query 10:11:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.745<-20583 Statuses=0008 0009 10:11:16 Msec=3750 True Az=112.995 Ze=-128.745 Az status=0008 Ze status=0009 10:11:16 Check angles 10:11:16 SkyScan query 10:11:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.745<-21983 Statuses=0008 0009 10:11:16 Msec=4500 True Az=112.995 Ze=-149.745 Az status=0008 Ze status=0009 10:11:17 Check angles 10:11:17 SkyScan query 10:11:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.67<-23378 Statuses=0008 0009 10:11:17 Msec=5250 True Az=112.995 Ze=-170.67 Az status=0008 Ze status=0009 10:11:17 Check angles 10:11:17 SkyScan query 10:11:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:11:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:11:18 Message to Master queued w/err=0: serial=120403 error=0 10:11:23 Received message from Master: op=Filter serial=120404 10:11:23 Color wheel filter change from 0 to 0 10:11:23 FLIGetFilterPos err=0 currentPosition=0 10:11:23 FLIGetStepsRemaining err=0 RemainingSteps=0 10:11:23 Filter is already there-color wheel unchanged 10:11:23 Received message from Master: op=Shutter serial=120405 10:11:23 Shutter LASER open 10:11:23 Received message from Camera: op=State serial=120407 10:11:23 GetSingleValue result=40 Value=cccccccc 10:11:23 SkyScan query 10:11:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:11:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:24 Parameters OK 10:11:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:24 Set A/D data flow result=40 10:11:24 Set A/D channel type result=40 10:11:24 Set A/D encoding result=40 10:11:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:24 Set channel filter=0.000000e+000 result=40 10:11:24 Config A/D Result=40 10:11:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:24 Get A/D filter: -9.255963e+061 result=40 10:11:24 Get A/D value=-858993460 result=40 10:11:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:24 Parameters OK 10:11:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:24 Set A/D data flow result=40 10:11:24 Set A/D channel type result=40 10:11:24 Set A/D encoding result=40 10:11:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:24 Set channel filter=0.000000e+000 result=40 10:11:24 Config A/D Result=40 10:11:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:24 Get A/D filter: -9.255963e+061 result=40 10:11:24 Get A/D value=-858993460 result=40 10:11:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:11:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:11:24 Aux= 10:11:24 Message to Camera, serial 120407 queued 10:11:32 Received message from Master: op=Shutter serial=120417 10:11:32 Shutter LASER close 10:11:33 Received message from Master: op=PointingHead serial=120421 10:11:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:11:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:11:33 Point started: ret=0 10:11:33 point_skyscan result=0 10:11:34 Check angles 10:11:34 SkyScan query 10:11:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.995<-21533 Statuses=0008 0009 10:11:34 Msec=0 True Az=112.995 Ze=-142.995 Az status=0008 Ze status=0009 10:11:35 Check angles 10:11:35 SkyScan query 10:11:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.545<-20103 Statuses=0008 0009 10:11:35 Msec=750 True Az=112.995 Ze=-121.545 Az status=0008 Ze status=0009 10:11:35 Check angles 10:11:35 SkyScan query 10:11:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.62<-18708 Statuses=0008 0009 10:11:36 Msec=1500 True Az=112.995 Ze=-100.62 Az status=0008 Ze status=0009 10:11:36 Check angles 10:11:36 SkyScan query 10:11:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.65<-17310 Statuses=0008 0009 10:11:37 Msec=2250 True Az=112.995 Ze=-79.65 Az status=0008 Ze status=0009 10:11:37 Check angles 10:11:37 SkyScan query 10:11:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.68<-15912 Statuses=0008 0009 10:11:37 Msec=3000 True Az=112.995 Ze=-58.68 Az status=0008 Ze status=0009 10:11:38 Check angles 10:11:38 SkyScan query 10:11:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.71<-14514 Statuses=0008 0009 10:11:38 Msec=3750 True Az=112.995 Ze=-37.71 Az status=0008 Ze status=0009 10:11:38 Check angles 10:11:38 SkyScan query 10:11:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.77<-13118 Statuses=0008 0009 10:11:39 Msec=4500 True Az=112.995 Ze=-16.77 Az status=0008 Ze status=0009 10:11:39 Check angles 10:11:39 SkyScan query 10:11:40 SkyScan query done: ret=0 az=113.01<-7534 ze=4.17<-11722 Statuses=0008 0009 10:11:40 Msec=5250 True Az=113.01 Ze=4.17 Az status=0008 Ze status=0009 10:11:40 Check angles 10:11:40 SkyScan query 10:11:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:11:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:11:40 Message to Master queued w/err=0: serial=120421 error=0 10:11:45 Received message from Master: op=Filter serial=120422 10:11:45 Color wheel filter change from 0 to 0 10:11:45 FLIGetFilterPos err=0 currentPosition=0 10:11:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:11:45 Filter is already there-color wheel unchanged 10:11:46 Received message from Master: op=Shutter serial=120423 10:11:46 Shutter LASER close 10:11:46 Received message from Camera: op=State serial=120425 10:11:46 GetSingleValue result=40 Value=cccccccc 10:11:46 SkyScan query 10:11:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:11:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:46 Parameters OK 10:11:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:46 Set A/D data flow result=40 10:11:46 Set A/D channel type result=40 10:11:46 Set A/D encoding result=40 10:11:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:46 Set channel filter=0.000000e+000 result=40 10:11:46 Config A/D Result=40 10:11:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:46 Get A/D filter: -9.255963e+061 result=40 10:11:46 Get A/D value=-858993460 result=40 10:11:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:46 Parameters OK 10:11:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:46 Set A/D data flow result=40 10:11:46 Set A/D channel type result=40 10:11:46 Set A/D encoding result=40 10:11:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:46 Set channel filter=0.000000e+000 result=40 10:11:46 Config A/D Result=40 10:11:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:46 Get A/D filter: -9.255963e+061 result=40 10:11:46 Get A/D value=-858993460 result=40 10:11:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:11:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:11:46 Aux= 10:11:46 Message to Camera, serial 120425 queued 10:12:23 Received message from Master: op=PointingHead serial=120438 10:12:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:12:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:12:24 Point started: ret=0 10:12:24 point_skyscan result=0 10:12:24 Check angles 10:12:24 SkyScan query 10:12:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:12:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:12:25 Message to Master queued w/err=0: serial=120438 error=0 10:12:30 Received message from Master: op=Filter serial=120439 10:12:30 Color wheel filter change from 0 to 0 10:12:30 FLIGetFilterPos err=0 currentPosition=0 10:12:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:12:30 Filter is already there-color wheel unchanged 10:12:30 Received message from Master: op=Shutter serial=120440 10:12:30 Shutter LASER close 10:12:30 Received message from Camera: op=State serial=120442 10:12:30 GetSingleValue result=40 Value=cccccccc 10:12:30 SkyScan query 10:12:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:12:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:31 Parameters OK 10:12:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:31 Set A/D data flow result=40 10:12:31 Set A/D channel type result=40 10:12:31 Set A/D encoding result=40 10:12:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:31 Set channel filter=0.000000e+000 result=40 10:12:31 Config A/D Result=40 10:12:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:31 Get A/D filter: -9.255963e+061 result=40 10:12:31 Get A/D value=-858993460 result=40 10:12:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:31 Parameters OK 10:12:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:31 Set A/D data flow result=40 10:12:31 Set A/D channel type result=40 10:12:31 Set A/D encoding result=40 10:12:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:31 Set channel filter=0.000000e+000 result=40 10:12:31 Config A/D Result=40 10:12:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:31 Get A/D filter: -9.255963e+061 result=40 10:12:31 Get A/D value=-858993460 result=40 10:12:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:12:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:12:31 Aux= 10:12:31 Message to Camera, serial 120442 queued 10:13:07 Received message from Master: op=PointingHead serial=120455 10:13:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:13:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:13:08 Point started: ret=0 10:13:08 point_skyscan result=0 10:13:09 Check angles 10:13:09 SkyScan query 10:13:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:13:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:13:09 Message to Master queued w/err=0: serial=120455 error=0 10:13:14 Received message from Master: op=Filter serial=120456 10:13:14 Color wheel filter change from 0 to 0 10:13:14 FLIGetFilterPos err=0 currentPosition=0 10:13:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:14 Filter is already there-color wheel unchanged 10:13:14 Received message from Master: op=Shutter serial=120457 10:13:14 Shutter LASER close 10:13:14 Received message from Camera: op=State serial=120459 10:13:14 GetSingleValue result=40 Value=cccccccc 10:13:14 SkyScan query 10:13:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:13:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:15 Parameters OK 10:13:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:15 Set A/D data flow result=40 10:13:15 Set A/D channel type result=40 10:13:15 Set A/D encoding result=40 10:13:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:15 Set channel filter=0.000000e+000 result=40 10:13:15 Config A/D Result=40 10:13:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:15 Get A/D filter: -9.255963e+061 result=40 10:13:15 Get A/D value=-858993460 result=40 10:13:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:15 Parameters OK 10:13:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:15 Set A/D data flow result=40 10:13:15 Set A/D channel type result=40 10:13:15 Set A/D encoding result=40 10:13:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:15 Set channel filter=0.000000e+000 result=40 10:13:15 Config A/D Result=40 10:13:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:15 Get A/D filter: -9.255963e+061 result=40 10:13:15 Get A/D value=-858993460 result=40 10:13:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:15 Aux= 10:13:15 Message to Camera, serial 120459 queued 10:13:51 Received message from Master: op=PointingHead serial=120471 10:13:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:13:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:13:51 Point started: ret=0 10:13:51 point_skyscan result=0 10:13:52 Check angles 10:13:52 SkyScan query 10:13:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:13:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:13:53 Message to Master queued w/err=0: serial=120471 error=0 10:13:58 Received message from Master: op=Filter serial=120472 10:13:58 Color wheel filter change from 0 to 0 10:13:58 FLIGetFilterPos err=0 currentPosition=0 10:13:58 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:58 Filter is already there-color wheel unchanged 10:13:58 Received message from Master: op=Shutter serial=120473 10:13:58 Shutter LASER close 10:13:58 Received message from Camera: op=State serial=120475 10:13:58 GetSingleValue result=40 Value=cccccccc 10:13:58 SkyScan query 10:13:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:13:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:58 Parameters OK 10:13:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:58 Set A/D data flow result=40 10:13:58 Set A/D channel type result=40 10:13:58 Set A/D encoding result=40 10:13:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:58 Set channel filter=0.000000e+000 result=40 10:13:58 Config A/D Result=40 10:13:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:58 Get A/D filter: -9.255963e+061 result=40 10:13:58 Get A/D value=-858993460 result=40 10:13:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:58 Parameters OK 10:13:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:58 Set A/D data flow result=40 10:13:58 Set A/D channel type result=40 10:13:58 Set A/D encoding result=40 10:13:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:58 Set channel filter=0.000000e+000 result=40 10:13:58 Config A/D Result=40 10:13:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:58 Get A/D filter: -9.255963e+061 result=40 10:13:58 Get A/D value=-858993460 result=40 10:13:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:58 Aux= 10:13:58 Message to Camera, serial 120475 queued 10:14:35 Received message from Master: op=PointingHead serial=120488 10:14:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:14:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:14:35 Point started: ret=0 10:14:35 point_skyscan result=0 10:14:36 Check angles 10:14:36 SkyScan query 10:14:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.52<-13568 Statuses=0008 0009 10:14:37 Msec=0 True Az=112.995 Ze=-23.52 Az status=0008 Ze status=0009 10:14:37 Check angles 10:14:37 SkyScan query 10:14:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 [UTC 2019-3-5 10:14:38] 10:14:38 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 10:14:38 Check angles 10:14:38 SkyScan query 10:14:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.4<-16360 Statuses=0008 0009 10:14:38 Msec=1500 True Az=112.995 Ze=-65.4 Az status=0008 Ze status=0009 10:14:38 Check angles 10:14:38 SkyScan query 10:14:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 10:14:39 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 10:14:39 Check angles 10:14:39 SkyScan query 10:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.28<-19152 Statuses=0008 0009 10:14:40 Msec=3000 True Az=112.995 Ze=-107.28 Az status=0008 Ze status=0009 10:14:40 Check angles 10:14:40 SkyScan query 10:14:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.235<-20549 Statuses=0008 0009 10:14:41 Msec=3750 True Az=112.995 Ze=-128.235 Az status=0008 Ze status=0009 10:14:41 Check angles 10:14:41 SkyScan query 10:14:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.25<-21950 Statuses=0008 0009 10:14:41 Msec=4500 True Az=112.995 Ze=-149.25 Az status=0008 Ze status=0009 10:14:41 Check angles 10:14:41 SkyScan query 10:14:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.19<-23346 Statuses=0008 0009 10:14:42 Msec=5250 True Az=112.995 Ze=-170.19 Az status=0008 Ze status=0009 10:14:42 Check angles 10:14:42 SkyScan query 10:14:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:14:43 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:14:43 Message to Master queued w/err=0: serial=120488 error=0 10:14:48 Received message from Master: op=Filter serial=120489 10:14:48 Color wheel filter change from 0 to 0 10:14:48 FLIGetFilterPos err=0 currentPosition=0 10:14:48 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:48 Filter is already there-color wheel unchanged 10:14:48 Received message from Master: op=Shutter serial=120490 10:14:48 Shutter LASER open 10:14:48 Received message from Camera: op=State serial=120492 10:14:48 GetSingleValue result=40 Value=cccccccc 10:14:48 SkyScan query 10:14:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:14:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:49 Parameters OK 10:14:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:49 Set A/D data flow result=40 10:14:49 Set A/D channel type result=40 10:14:49 Set A/D encoding result=40 10:14:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:49 Set channel filter=0.000000e+000 result=40 10:14:49 Config A/D Result=40 10:14:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:49 Get A/D filter: -9.255963e+061 result=40 10:14:49 Get A/D value=-858993460 result=40 10:14:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:49 Parameters OK 10:14:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:49 Set A/D data flow result=40 10:14:49 Set A/D channel type result=40 10:14:49 Set A/D encoding result=40 10:14:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:49 Set channel filter=0.000000e+000 result=40 10:14:49 Config A/D Result=40 10:14:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:49 Get A/D filter: -9.255963e+061 result=40 10:14:49 Get A/D value=-858993460 result=40 10:14:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:14:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:14:49 Aux= 10:14:49 Message to Camera, serial 120492 queued 10:14:57 Received message from Master: op=Shutter serial=120502 10:14:57 Shutter LASER close 10:14:58 Received message from Master: op=PointingHead serial=120506 10:14:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:14:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:14:58 Point started: ret=0 10:14:58 point_skyscan result=0 10:14:59 Check angles 10:14:59 SkyScan query 10:15:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 10:15:00 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 10:15:00 Check angles 10:15:00 SkyScan query 10:15:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 10:15:00 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 10:15:01 Check angles 10:15:01 SkyScan query 10:15:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.815<-18721 Statuses=0008 0009 10:15:01 Msec=1500 True Az=112.995 Ze=-100.815 Az status=0008 Ze status=0009 10:15:01 Check angles 10:15:01 SkyScan query 10:15:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.38<-17292 Statuses=0008 0009 10:15:02 Msec=2250 True Az=112.995 Ze=-79.38 Az status=0008 Ze status=0009 10:15:02 Check angles 10:15:02 SkyScan query 10:15:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.425<-15895 Statuses=0008 0009 10:15:03 Msec=3000 True Az=112.995 Ze=-58.425 Az status=0008 Ze status=0009 10:15:03 Check angles 10:15:03 SkyScan query 10:15:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.5<-14500 Statuses=0008 0009 10:15:03 Msec=3750 True Az=112.995 Ze=-37.5 Az status=0008 Ze status=0009 10:15:04 Check angles 10:15:04 SkyScan query 10:15:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.53<-13102 Statuses=0008 0009 10:15:04 Msec=4500 True Az=112.995 Ze=-16.53 Az status=0008 Ze status=0009 10:15:04 Check angles 10:15:04 SkyScan query 10:15:05 SkyScan query done: ret=0 az=113.01<-7534 ze=4.335<-11711 Statuses=0008 0009 10:15:05 Msec=5250 True Az=113.01 Ze=4.335 Az status=0008 Ze status=0009 10:15:05 Check angles 10:15:05 SkyScan query 10:15:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:15:06 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:15:06 Message to Master queued w/err=0: serial=120506 error=0 10:15:11 Received message from Master: op=Filter serial=120507 10:15:11 Color wheel filter change from 0 to 0 10:15:11 FLIGetFilterPos err=0 currentPosition=0 10:15:11 FLIGetStepsRemaining err=0 RemainingSteps=0 10:15:11 Filter is already there-color wheel unchanged 10:15:11 Received message from Master: op=Shutter serial=120508 10:15:11 Shutter LASER close 10:15:11 Received message from Camera: op=State serial=120510 10:15:11 GetSingleValue result=40 Value=cccccccc 10:15:11 SkyScan query 10:15:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:15:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:12 Parameters OK 10:15:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:12 Set A/D data flow result=40 10:15:12 Set A/D channel type result=40 10:15:12 Set A/D encoding result=40 10:15:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:12 Set channel filter=0.000000e+000 result=40 10:15:12 Config A/D Result=40 10:15:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:12 Get A/D filter: -9.255963e+061 result=40 10:15:12 Get A/D value=-858993460 result=40 10:15:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:12 Parameters OK 10:15:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:12 Set A/D data flow result=40 10:15:12 Set A/D channel type result=40 10:15:12 Set A/D encoding result=40 10:15:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:12 Set channel filter=0.000000e+000 result=40 10:15:12 Config A/D Result=40 10:15:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:12 Get A/D filter: -9.255963e+061 result=40 10:15:12 Get A/D value=-858993460 result=40 10:15:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:15:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:15:12 Aux= 10:15:12 Message to Camera, serial 120510 queued 10:15:48 Received message from Master: op=PointingHead serial=120523 10:15:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:15:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:15:49 Point started: ret=0 10:15:49 point_skyscan result=0 10:15:49 Check angles 10:15:49 SkyScan query 10:15:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:15:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:15:50 Message to Master queued w/err=0: serial=120523 error=0 10:15:55 Received message from Master: op=Filter serial=120524 10:15:55 Color wheel filter change from 0 to 0 10:15:55 FLIGetFilterPos err=0 currentPosition=0 10:15:55 FLIGetStepsRemaining err=0 RemainingSteps=0 10:15:55 Filter is already there-color wheel unchanged 10:15:55 Received message from Master: op=Shutter serial=120525 10:15:55 Shutter LASER close 10:15:55 Received message from Camera: op=State serial=120527 10:15:55 GetSingleValue result=40 Value=cccccccc 10:15:55 SkyScan query 10:15:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:15:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:56 Parameters OK 10:15:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:56 Set A/D data flow result=40 10:15:56 Set A/D channel type result=40 10:15:56 Set A/D encoding result=40 10:15:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:56 Set channel filter=0.000000e+000 result=40 10:15:56 Config A/D Result=40 10:15:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:56 Get A/D filter: -9.255963e+061 result=40 10:15:56 Get A/D value=-858993460 result=40 10:15:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:56 Parameters OK 10:15:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:56 Set A/D data flow result=40 10:15:56 Set A/D channel type result=40 10:15:56 Set A/D encoding result=40 10:15:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:56 Set channel filter=0.000000e+000 result=40 10:15:56 Config A/D Result=40 10:15:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:56 Get A/D filter: -9.255963e+061 result=40 10:15:56 Get A/D value=-858993460 result=40 10:15:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:15:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:15:56 Aux= 10:15:56 Message to Camera, serial 120527 queued 10:16:33 Received message from Master: op=PointingHead serial=120540 10:16:33 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:16:33 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:16:33 Point started: ret=0 10:16:33 point_skyscan result=0 10:16:34 Check angles 10:16:34 SkyScan query 10:16:34 SkyScan query done: ret=0 az=136.38<-9092 ze=-6.51<-12434 Statuses=0009 0008 10:16:34 Msec=0 True Az=136.38 Ze=-6.51 Az status=0009 Ze status=0008 10:16:35 Check angles 10:16:35 SkyScan query 10:16:35 SkyScan query done: ret=0 az=154.23<-10282 ze=-6.495<-12433 Statuses=0009 0008 10:16:35 Msec=750 True Az=154.23 Ze=-6.495 Az status=0009 Ze status=0008 10:16:35 Check angles 10:16:35 SkyScan query 10:16:36 SkyScan query done: ret=0 az=171.75<-11450 ze=-6.495<-12433 Statuses=0009 0008 10:16:36 Msec=1500 True Az=171.75 Ze=-6.495 Az status=0009 Ze status=0008 10:16:36 Check angles 10:16:36 SkyScan query 10:16:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:16:37 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:16:37 Message to Master queued w/err=0: serial=120540 error=0 10:16:42 Received message from Master: op=Filter serial=120541 10:16:42 Color wheel filter change from 0 to 0 10:16:42 FLIGetFilterPos err=0 currentPosition=0 10:16:42 FLIGetStepsRemaining err=0 RemainingSteps=0 10:16:42 Filter is already there-color wheel unchanged 10:16:42 Received message from Master: op=Shutter serial=120542 10:16:42 Shutter LASER close 10:16:42 Received message from Camera: op=State serial=120544 10:16:42 GetSingleValue result=40 Value=cccccccc 10:16:42 SkyScan query 10:16:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:16:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:42 Parameters OK 10:16:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:42 Set A/D data flow result=40 10:16:42 Set A/D channel type result=40 10:16:42 Set A/D encoding result=40 10:16:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:42 Set channel filter=0.000000e+000 result=40 10:16:42 Config A/D Result=40 10:16:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:42 Get A/D filter: -9.255963e+061 result=40 10:16:42 Get A/D value=-858993460 result=40 10:16:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:42 Parameters OK 10:16:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:42 Set A/D data flow result=40 10:16:42 Set A/D channel type result=40 10:16:42 Set A/D encoding result=40 10:16:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:42 Set channel filter=0.000000e+000 result=40 10:16:42 Config A/D Result=40 10:16:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:42 Get A/D filter: -9.255963e+061 result=40 10:16:42 Get A/D value=-858993460 result=40 10:16:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:16:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:16:42 Aux= 10:16:42 Message to Camera, serial 120544 queued 10:17:19 Received message from Master: op=PointingHead serial=120557 10:17:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:17:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:17:20 Point started: ret=0 10:17:20 point_skyscan result=0 10:17:20 Check angles 10:17:20 SkyScan query 10:17:21 SkyScan query done: ret=0 az=153<-10200 ze=6.51<-11566 Statuses=0009 0008 10:17:21 Msec=0 True Az=153 Ze=6.51 Az status=0009 Ze status=0008 10:17:21 Check angles 10:17:21 SkyScan query 10:17:22 SkyScan query done: ret=0 az=135.51<-9034 ze=6.495<-11567 Statuses=0009 0008 10:17:22 Msec=750 True Az=135.51 Ze=6.495 Az status=0009 Ze status=0008 10:17:22 Check angles 10:17:22 SkyScan query 10:17:22 SkyScan query done: ret=0 az=118.05<-7870 ze=6.495<-11567 Statuses=0009 0008 10:17:22 Msec=1500 True Az=118.05 Ze=6.495 Az status=0009 Ze status=0008 10:17:23 Check angles 10:17:23 SkyScan query 10:17:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:17:23 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:17:23 Message to Master queued w/err=0: serial=120557 error=0 10:17:28 Received message from Master: op=Filter serial=120558 10:17:28 Color wheel filter change from 0 to 0 10:17:28 FLIGetFilterPos err=0 currentPosition=0 10:17:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:17:28 Filter is already there-color wheel unchanged 10:17:28 Received message from Master: op=Shutter serial=120559 10:17:28 Shutter LASER close 10:17:28 Received message from Camera: op=State serial=120561 10:17:28 GetSingleValue result=40 Value=cccccccc 10:17:28 SkyScan query 10:17:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:17:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:29 Parameters OK 10:17:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:29 Set A/D data flow result=40 10:17:29 Set A/D channel type result=40 10:17:29 Set A/D encoding result=40 10:17:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:29 Set channel filter=0.000000e+000 result=40 10:17:29 Config A/D Result=40 10:17:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:29 Get A/D filter: -9.255963e+061 result=40 10:17:29 Get A/D value=-858993460 result=40 10:17:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:29 Parameters OK 10:17:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:29 Set A/D data flow result=40 10:17:29 Set A/D channel type result=40 10:17:29 Set A/D encoding result=40 10:17:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:29 Set channel filter=0.000000e+000 result=40 10:17:29 Config A/D Result=40 10:17:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:29 Get A/D filter: -9.255963e+061 result=40 10:17:29 Get A/D value=-858993460 result=40 10:17:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:17:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:17:29 Aux= 10:17:29 Message to Camera, serial 120561 queued 10:18:06 Received message from Master: op=PointingHead serial=120574 10:18:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:18:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:18:06 Point started: ret=0 10:18:06 point_skyscan result=0 10:18:07 Check angles 10:18:07 SkyScan query 10:18:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.82<-13588 Statuses=0008 0009 10:18:08 Msec=0 True Az=112.995 Ze=-23.82 Az status=0008 Ze status=0009 10:18:08 Check angles 10:18:08 SkyScan query 10:18:08 SkyScan query done: ret=0 az=113.01<-7534 ze=-45.21<-15014 Statuses=0008 0009 10:18:08 Msec=750 True Az=113.01 Ze=-45.21 Az status=0008 Ze status=0009 10:18:08 Check angles 10:18:08 SkyScan query 10:18:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.195<-16413 Statuses=0008 0009 10:18:09 Msec=1500 True Az=112.995 Ze=-66.195 Az status=0008 Ze status=0009 10:18:09 Check angles 10:18:09 SkyScan query 10:18:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.165<-17811 Statuses=0008 0009 10:18:10 Msec=2250 True Az=112.995 Ze=-87.165 Az status=0008 Ze status=0009 10:18:10 Check angles 10:18:10 SkyScan query 10:18:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.54<-19236 Statuses=0008 0009 10:18:11 Msec=3000 True Az=112.995 Ze=-108.54 Az status=0008 Ze status=0009 10:18:11 Check angles 10:18:11 SkyScan query 10:18:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.495<-20633 Statuses=0008 0009 10:18:11 Msec=3750 True Az=112.995 Ze=-129.495 Az status=0008 Ze status=0009 10:18:11 Check angles 10:18:11 SkyScan query 10:18:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.42<-22028 Statuses=0008 0009 10:18:12 Msec=4500 True Az=112.995 Ze=-150.42 Az status=0008 Ze status=0009 10:18:12 Check angles 10:18:12 SkyScan query 10:18:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0008 0009 10:18:13 Msec=5250 True Az=112.995 Ze=-171.195 Az status=0008 Ze status=0009 10:18:13 Check angles 10:18:13 SkyScan query 10:18:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:18:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:18:14 Message to Master queued w/err=0: serial=120574 error=0 10:18:19 Received message from Master: op=Filter serial=120575 10:18:19 Color wheel filter change from 0 to 0 10:18:19 FLIGetFilterPos err=0 currentPosition=0 10:18:19 FLIGetStepsRemaining err=0 RemainingSteps=0 10:18:19 Filter is already there-color wheel unchanged 10:18:19 Received message from Master: op=Shutter serial=120576 10:18:19 Shutter LASER open 10:18:19 Received message from Camera: op=State serial=120578 10:18:19 GetSingleValue result=40 Value=cccccccc 10:18:19 SkyScan query 10:18:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:18:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:19 Parameters OK 10:18:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:19 Set A/D data flow result=40 10:18:19 Set A/D channel type result=40 10:18:19 Set A/D encoding result=40 10:18:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:19 Set channel filter=0.000000e+000 result=40 10:18:19 Config A/D Result=40 10:18:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:19 Get A/D filter: -9.255963e+061 result=40 10:18:19 Get A/D value=-858993460 result=40 10:18:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:19 Parameters OK 10:18:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:19 Set A/D data flow result=40 10:18:19 Set A/D channel type result=40 10:18:19 Set A/D encoding result=40 10:18:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:19 Set channel filter=0.000000e+000 result=40 10:18:19 Config A/D Result=40 10:18:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:19 Get A/D filter: -9.255963e+061 result=40 10:18:19 Get A/D value=-858993460 result=40 10:18:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:18:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:18:19 Aux= 10:18:19 Message to Camera, serial 120578 queued 10:18:28 Received message from Master: op=Shutter serial=120588 10:18:28 Shutter LASER close 10:18:28 Received message from Master: op=PointingHead serial=120592 10:18:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:18:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:18:29 Point started: ret=0 10:18:29 point_skyscan result=0 10:18:29 Check angles 10:18:29 SkyScan query 10:18:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 10:18:30 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 10:18:30 Check angles 10:18:30 SkyScan query 10:18:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.965<-20131 Statuses=0008 0009 10:18:31 Msec=750 True Az=112.995 Ze=-121.965 Az status=0008 Ze status=0009 10:18:31 Check angles 10:18:31 SkyScan query 10:18:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.04<-18736 Statuses=0008 0009 10:18:32 Msec=1500 True Az=112.995 Ze=-101.04 Az status=0008 Ze status=0009 10:18:32 Check angles 10:18:32 SkyScan query 10:18:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.055<-17337 Statuses=0008 0009 10:18:32 Msec=2250 True Az=112.995 Ze=-80.055 Az status=0008 Ze status=0009 10:18:32 Check angles 10:18:32 SkyScan query 10:18:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.115<-15941 Statuses=0008 0009 10:18:33 Msec=3000 True Az=112.995 Ze=-59.115 Az status=0008 Ze status=0009 10:18:33 Check angles 10:18:33 SkyScan query 10:18:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.085<-14539 Statuses=0008 0009 10:18:34 Msec=3750 True Az=112.995 Ze=-38.085 Az status=0008 Ze status=0009 10:18:34 Check angles 10:18:34 SkyScan query 10:18:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.16<-13144 Statuses=0008 0009 10:18:35 Msec=4500 True Az=112.995 Ze=-17.16 Az status=0008 Ze status=0009 10:18:35 Check angles 10:18:35 SkyScan query 10:18:35 SkyScan query done: ret=0 az=112.995<-7533 ze=3.81<-11746 Statuses=0008 0009 10:18:35 Msec=5250 True Az=112.995 Ze=3.81 Az status=0008 Ze status=0009 10:18:35 Check angles 10:18:35 SkyScan query 10:18:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:18:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:18:36 Message to Master queued w/err=0: serial=120592 error=0 10:18:41 Received message from Master: op=Filter serial=120593 10:18:41 Color wheel filter change from 0 to 0 10:18:41 FLIGetFilterPos err=0 currentPosition=0 10:18:41 FLIGetStepsRemaining err=0 RemainingSteps=0 10:18:41 Filter is already there-color wheel unchanged 10:18:41 Received message from Master: op=Shutter serial=120594 10:18:41 Shutter LASER close 10:18:41 Received message from Camera: op=State serial=120596 10:18:41 GetSingleValue result=40 Value=cccccccc 10:18:41 SkyScan query 10:18:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:18:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:42 Parameters OK 10:18:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:42 Set A/D data flow result=40 10:18:42 Set A/D channel type result=40 10:18:42 Set A/D encoding result=40 10:18:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:42 Set channel filter=0.000000e+000 result=40 10:18:42 Config A/D Result=40 10:18:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:42 Get A/D filter: -9.255963e+061 result=40 10:18:42 Get A/D value=-858993460 result=40 10:18:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:42 Parameters OK 10:18:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:42 Set A/D data flow result=40 10:18:42 Set A/D channel type result=40 10:18:42 Set A/D encoding result=40 10:18:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:42 Set channel filter=0.000000e+000 result=40 10:18:42 Config A/D Result=40 10:18:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:42 Get A/D filter: -9.255963e+061 result=40 10:18:42 Get A/D value=-858993460 result=40 10:18:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:18:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:18:42 Aux= 10:18:42 Message to Camera, serial 120596 queued 10:19:19 Received message from Master: op=PointingHead serial=120609 10:19:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:19:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:19:19 Point started: ret=0 10:19:19 point_skyscan result=0 10:19:20 Check angles 10:19:20 SkyScan query 10:19:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:19:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:19:20 Message to Master queued w/err=0: serial=120609 error=0 10:19:25 Received message from Master: op=Filter serial=120610 10:19:25 Color wheel filter change from 0 to 0 10:19:25 FLIGetFilterPos err=0 currentPosition=0 10:19:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:19:25 Filter is already there-color wheel unchanged 10:19:26 Received message from Master: op=Shutter serial=120611 10:19:26 Shutter LASER close 10:19:26 Received message from Camera: op=State serial=120613 10:19:26 GetSingleValue result=40 Value=cccccccc 10:19:26 SkyScan query 10:19:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:19:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:26 Parameters OK 10:19:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:26 Set A/D data flow result=40 10:19:26 Set A/D channel type result=40 10:19:26 Set A/D encoding result=40 10:19:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:26 Set channel filter=0.000000e+000 result=40 10:19:26 Config A/D Result=40 10:19:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:26 Get A/D filter: -9.255963e+061 result=40 10:19:26 Get A/D value=-858993460 result=40 10:19:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:26 Parameters OK 10:19:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:26 Set A/D data flow result=40 10:19:26 Set A/D channel type result=40 10:19:26 Set A/D encoding result=40 10:19:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:26 Set channel filter=0.000000e+000 result=40 10:19:26 Config A/D Result=40 10:19:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:26 Get A/D filter: -9.255963e+061 result=40 10:19:26 Get A/D value=-858993460 result=40 10:19:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:19:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:19:26 Aux= 10:19:26 Message to Camera, serial 120613 queued 10:20:02 Received message from Master: op=PointingHead serial=120625 10:20:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:20:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:20:03 Point started: ret=0 10:20:03 point_skyscan result=0 10:20:03 Check angles 10:20:03 SkyScan query 10:20:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:20:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:20:04 Message to Master queued w/err=0: serial=120625 error=0 10:20:09 Received message from Master: op=Filter serial=120626 10:20:09 Color wheel filter change from 0 to 0 10:20:09 FLIGetFilterPos err=0 currentPosition=0 10:20:09 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:09 Filter is already there-color wheel unchanged 10:20:09 Received message from Master: op=Shutter serial=120627 10:20:09 Shutter LASER close 10:20:09 Received message from Camera: op=State serial=120629 10:20:09 GetSingleValue result=40 Value=cccccccc 10:20:09 SkyScan query 10:20:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:20:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:10 Parameters OK 10:20:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:10 Set A/D data flow result=40 10:20:10 Set A/D channel type result=40 10:20:10 Set A/D encoding result=40 10:20:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:10 Set channel filter=0.000000e+000 result=40 10:20:10 Config A/D Result=40 10:20:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:10 Get A/D filter: -9.255963e+061 result=40 10:20:10 Get A/D value=-858993460 result=40 10:20:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:10 Parameters OK 10:20:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:10 Set A/D data flow result=40 10:20:10 Set A/D channel type result=40 10:20:10 Set A/D encoding result=40 10:20:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:10 Set channel filter=0.000000e+000 result=40 10:20:10 Config A/D Result=40 10:20:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:10 Get A/D filter: -9.255963e+061 result=40 10:20:10 Get A/D value=-858993460 result=40 10:20:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:10 Aux= 10:20:10 Message to Camera, serial 120629 queued 10:20:46 Received message from Master: op=PointingHead serial=120642 10:20:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:20:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:20:47 Point started: ret=0 10:20:47 point_skyscan result=0 10:20:48 Check angles 10:20:48 SkyScan query 10:20:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:20:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:20:48 Message to Master queued w/err=0: serial=120642 error=0 10:20:53 Received message from Master: op=Filter serial=120643 10:20:53 Color wheel filter change from 0 to 0 10:20:53 FLIGetFilterPos err=0 currentPosition=0 10:20:53 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:53 Filter is already there-color wheel unchanged 10:20:53 Received message from Master: op=Shutter serial=120644 10:20:53 Shutter LASER close 10:20:53 Received message from Camera: op=State serial=120646 10:20:53 GetSingleValue result=40 Value=cccccccc 10:20:53 SkyScan query 10:20:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:20:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:54 Parameters OK 10:20:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:54 Set A/D data flow result=40 10:20:54 Set A/D channel type result=40 10:20:54 Set A/D encoding result=40 10:20:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:54 Set channel filter=0.000000e+000 result=40 10:20:54 Config A/D Result=40 10:20:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:54 Get A/D filter: -9.255963e+061 result=40 10:20:54 Get A/D value=-858993460 result=40 10:20:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:54 Parameters OK 10:20:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:54 Set A/D data flow result=40 10:20:54 Set A/D channel type result=40 10:20:54 Set A/D encoding result=40 10:20:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:54 Set channel filter=0.000000e+000 result=40 10:20:54 Config A/D Result=40 10:20:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:54 Get A/D filter: -9.255963e+061 result=40 10:20:54 Get A/D value=-858993460 result=40 10:20:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:54 Aux= 10:20:54 Message to Camera, serial 120646 queued 10:21:31 Received message from Master: op=PointingHead serial=120659 10:21:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:21:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:21:31 Point started: ret=0 10:21:31 point_skyscan result=0 10:21:32 Check angles 10:21:32 SkyScan query 10:21:32 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.76<-13584 Statuses=0008 0009 10:21:32 Msec=0 True Az=112.98 Ze=-23.76 Az status=0008 Ze status=0009 10:21:33 Check angles 10:21:33 SkyScan query 10:21:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.715<-14981 Statuses=0008 0009 10:21:33 Msec=750 True Az=112.995 Ze=-44.715 Az status=0008 Ze status=0009 10:21:33 Check angles 10:21:33 SkyScan query 10:21:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.12<-16408 Statuses=0008 0009 10:21:34 Msec=1500 True Az=112.995 Ze=-66.12 Az status=0008 Ze status=0009 10:21:34 Check angles 10:21:34 SkyScan query 10:21:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.12<-17808 Statuses=0008 0009 10:21:35 Msec=2250 True Az=112.995 Ze=-87.12 Az status=0008 Ze status=0009 10:21:35 Check angles 10:21:35 SkyScan query 10:21:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.06<-19204 Statuses=0008 0009 10:21:35 Msec=3000 True Az=112.995 Ze=-108.06 Az status=0008 Ze status=0009 10:21:36 Check angles 10:21:36 SkyScan query 10:21:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-129<-20600 Statuses=0008 0009 10:21:36 Msec=3750 True Az=112.995 Ze=-129 Az status=0008 Ze status=0009 10:21:36 Check angles 10:21:36 SkyScan query 10:21:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.97<-21998 Statuses=0008 0009 10:21:37 Msec=4500 True Az=112.995 Ze=-149.97 Az status=0008 Ze status=0009 10:21:37 Check angles 10:21:37 SkyScan query 10:21:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.85<-23390 Statuses=0008 0009 10:21:38 Msec=5250 True Az=112.995 Ze=-170.85 Az status=0008 Ze status=0009 10:21:38 Check angles 10:21:38 SkyScan query 10:21:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:21:38 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:21:38 Message to Master queued w/err=0: serial=120659 error=0 10:21:43 Received message from Master: op=Filter serial=120660 10:21:43 Color wheel filter change from 0 to 0 10:21:43 FLIGetFilterPos err=0 currentPosition=0 10:21:43 FLIGetStepsRemaining err=0 RemainingSteps=0 10:21:43 Filter is already there-color wheel unchanged 10:21:44 Received message from Master: op=Shutter serial=120661 10:21:44 Shutter LASER open 10:21:44 Received message from Camera: op=State serial=120663 10:21:44 GetSingleValue result=40 Value=cccccccc 10:21:44 SkyScan query 10:21:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:21:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:44 Parameters OK 10:21:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:44 Set A/D data flow result=40 10:21:44 Set A/D channel type result=40 10:21:44 Set A/D encoding result=40 10:21:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:44 Set channel filter=0.000000e+000 result=40 10:21:44 Config A/D Result=40 10:21:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:44 Get A/D filter: -9.255963e+061 result=40 10:21:44 Get A/D value=-858993460 result=40 10:21:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:44 Parameters OK 10:21:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:44 Set A/D data flow result=40 10:21:44 Set A/D channel type result=40 10:21:44 Set A/D encoding result=40 10:21:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:44 Set channel filter=0.000000e+000 result=40 10:21:44 Config A/D Result=40 10:21:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:44 Get A/D filter: -9.255963e+061 result=40 10:21:44 Get A/D value=-858993460 result=40 10:21:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:21:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:21:44 Aux= 10:21:44 Message to Camera, serial 120663 queued 10:21:53 Received message from Master: op=Shutter serial=120673 10:21:53 Shutter LASER close 10:21:53 Received message from Master: op=PointingHead serial=120677 10:21:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:21:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:21:54 Point started: ret=0 10:21:54 point_skyscan result=0 10:21:55 Check angles 10:21:55 SkyScan query 10:21:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 10:21:55 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 10:21:55 Check angles 10:21:55 SkyScan query 10:21:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 10:21:56 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 10:21:56 Check angles 10:21:56 SkyScan query 10:21:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.365<-18691 Statuses=0008 0009 10:21:57 Msec=1500 True Az=112.995 Ze=-100.365 Az status=0008 Ze status=0009 10:21:57 Check angles 10:21:57 SkyScan query 10:21:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.38<-17292 Statuses=0008 0009 10:21:57 Msec=2250 True Az=112.995 Ze=-79.38 Az status=0008 Ze status=0009 10:21:58 Check angles 10:21:58 SkyScan query 10:21:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.455<-15897 Statuses=0008 0009 10:21:58 Msec=3000 True Az=112.995 Ze=-58.455 Az status=0008 Ze status=0009 10:21:58 Check angles 10:21:58 SkyScan query 10:21:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.53<-14502 Statuses=0008 0009 10:21:59 Msec=3750 True Az=112.995 Ze=-37.53 Az status=0008 Ze status=0009 10:21:59 Check angles 10:21:59 SkyScan query 10:22:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.56<-13104 Statuses=0008 0009 10:22:00 Msec=4500 True Az=112.995 Ze=-16.56 Az status=0008 Ze status=0009 10:22:00 Check angles 10:22:00 SkyScan query 10:22:00 SkyScan query done: ret=0 az=113.01<-7534 ze=4.32<-11712 Statuses=0008 0009 10:22:00 Msec=5250 True Az=113.01 Ze=4.32 Az status=0008 Ze status=0009 10:22:01 Check angles 10:22:01 SkyScan query 10:22:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:22:01 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:22:01 Message to Master queued w/err=0: serial=120677 error=0 10:22:06 Received message from Master: op=Filter serial=120678 10:22:06 Color wheel filter change from 0 to 0 10:22:06 FLIGetFilterPos err=0 currentPosition=0 10:22:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:22:06 Filter is already there-color wheel unchanged 10:22:06 Received message from Master: op=Shutter serial=120679 10:22:06 Shutter LASER close 10:22:06 Received message from Camera: op=State serial=120681 10:22:06 GetSingleValue result=40 Value=cccccccc 10:22:06 SkyScan query 10:22:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:22:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:07 Parameters OK 10:22:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:07 Set A/D data flow result=40 10:22:07 Set A/D channel type result=40 10:22:07 Set A/D encoding result=40 10:22:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:07 Set channel filter=0.000000e+000 result=40 10:22:07 Config A/D Result=40 10:22:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:07 Get A/D filter: -9.255963e+061 result=40 10:22:07 Get A/D value=-858993460 result=40 10:22:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:07 Parameters OK 10:22:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:07 Set A/D data flow result=40 10:22:07 Set A/D channel type result=40 10:22:07 Set A/D encoding result=40 10:22:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:07 Set channel filter=0.000000e+000 result=40 10:22:07 Config A/D Result=40 10:22:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:07 Get A/D filter: -9.255963e+061 result=40 10:22:07 Get A/D value=-858993460 result=40 10:22:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:22:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:22:07 Aux= 10:22:07 Message to Camera, serial 120681 queued 10:22:44 Received message from Master: op=PointingHead serial=120694 10:22:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:22:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:22:44 Point started: ret=0 10:22:44 point_skyscan result=0 10:22:45 Check angles 10:22:45 SkyScan query 10:22:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:22:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:22:46 Message to Master queued w/err=0: serial=120694 error=0 10:22:51 Received message from Master: op=Filter serial=120695 10:22:51 Color wheel filter change from 0 to 0 10:22:51 FLIGetFilterPos err=0 currentPosition=0 10:22:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:22:51 Filter is already there-color wheel unchanged 10:22:51 Received message from Master: op=Shutter serial=120696 10:22:51 Shutter LASER close 10:22:51 Received message from Camera: op=State serial=120698 10:22:51 GetSingleValue result=40 Value=cccccccc 10:22:51 SkyScan query 10:22:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:22:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:51 Parameters OK 10:22:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:51 Set A/D data flow result=40 10:22:51 Set A/D channel type result=40 10:22:51 Set A/D encoding result=40 10:22:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:51 Set channel filter=0.000000e+000 result=40 10:22:51 Config A/D Result=40 10:22:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:51 Get A/D filter: -9.255963e+061 result=40 10:22:51 Get A/D value=-858993460 result=40 10:22:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:51 Parameters OK 10:22:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:51 Set A/D data flow result=40 10:22:51 Set A/D channel type result=40 10:22:51 Set A/D encoding result=40 10:22:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:51 Set channel filter=0.000000e+000 result=40 10:22:51 Config A/D Result=40 10:22:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:51 Get A/D filter: -9.255963e+061 result=40 10:22:51 Get A/D value=-858993460 result=40 10:22:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:22:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:22:51 Aux= 10:22:51 Message to Camera, serial 120698 queued 10:23:28 Received message from Master: op=PointingHead serial=120711 10:23:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:23:28 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:23:28 Point started: ret=0 10:23:28 point_skyscan result=0 10:23:29 Check angles 10:23:29 SkyScan query 10:23:30 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.51<-12434 Statuses=0009 0008 10:23:30 Msec=0 True Az=135.915 Ze=-6.51 Az status=0009 Ze status=0008 10:23:30 Check angles 10:23:30 SkyScan query 10:23:31 SkyScan query done: ret=0 az=153.315<-10221 ze=-6.495<-12433 Statuses=0009 0008 10:23:31 Msec=750 True Az=153.315 Ze=-6.495 Az status=0009 Ze status=0008 10:23:31 Check angles 10:23:31 SkyScan query 10:23:31 SkyScan query done: ret=0 az=170.805<-11387 ze=-6.495<-12433 Statuses=0009 0008 10:23:31 Msec=1500 True Az=170.805 Ze=-6.495 Az status=0009 Ze status=0008 10:23:31 Check angles 10:23:31 SkyScan query 10:23:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:23:32 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:23:32 Message to Master queued w/err=0: serial=120711 error=0 10:23:37 Received message from Master: op=Filter serial=120712 10:23:37 Color wheel filter change from 0 to 0 10:23:37 FLIGetFilterPos err=0 currentPosition=0 10:23:37 FLIGetStepsRemaining err=0 RemainingSteps=0 10:23:37 Filter is already there-color wheel unchanged 10:23:37 Received message from Master: op=Shutter serial=120713 10:23:37 Shutter LASER close 10:23:37 Received message from Camera: op=State serial=120715 10:23:37 GetSingleValue result=40 Value=cccccccc 10:23:37 SkyScan query 10:23:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:23:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:38 Parameters OK 10:23:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:38 Set A/D data flow result=40 10:23:38 Set A/D channel type result=40 10:23:38 Set A/D encoding result=40 10:23:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:38 Set channel filter=0.000000e+000 result=40 10:23:38 Config A/D Result=40 10:23:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:38 Get A/D filter: -9.255963e+061 result=40 10:23:38 Get A/D value=-858993460 result=40 10:23:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:38 Parameters OK 10:23:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:38 Set A/D data flow result=40 10:23:38 Set A/D channel type result=40 10:23:38 Set A/D encoding result=40 10:23:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:38 Set channel filter=0.000000e+000 result=40 10:23:38 Config A/D Result=40 10:23:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:38 Get A/D filter: -9.255963e+061 result=40 10:23:38 Get A/D value=-858993460 result=40 10:23:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:23:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:23:38 Aux= 10:23:38 Message to Camera, serial 120715 queued [UTC 2019-3-5 10:23:50] 10:24:15 Received message from Master: op=PointingHead serial=120728 10:24:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:24:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:24:15 Point started: ret=0 10:24:15 point_skyscan result=0 10:24:16 Check angles 10:24:16 SkyScan query 10:24:16 SkyScan query done: ret=0 az=153.135<-10209 ze=6.51<-11566 Statuses=0009 0008 10:24:16 Msec=0 True Az=153.135 Ze=6.51 Az status=0009 Ze status=0008 10:24:17 Check angles 10:24:17 SkyScan query 10:24:17 SkyScan query done: ret=0 az=135.72<-9048 ze=6.495<-11567 Statuses=0009 0008 10:24:17 Msec=750 True Az=135.72 Ze=6.495 Az status=0009 Ze status=0008 10:24:17 Check angles 10:24:17 SkyScan query 10:24:18 SkyScan query done: ret=0 az=118.23<-7882 ze=6.495<-11567 Statuses=0009 0008 10:24:18 Msec=1500 True Az=118.23 Ze=6.495 Az status=0009 Ze status=0008 10:24:18 Check angles 10:24:18 SkyScan query 10:24:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:24:19 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:24:19 Message to Master queued w/err=0: serial=120728 error=0 10:24:24 Received message from Master: op=Filter serial=120729 10:24:24 Color wheel filter change from 0 to 0 10:24:24 FLIGetFilterPos err=0 currentPosition=0 10:24:24 FLIGetStepsRemaining err=0 RemainingSteps=0 10:24:24 Filter is already there-color wheel unchanged 10:24:24 Received message from Master: op=Shutter serial=120730 10:24:24 Shutter LASER close 10:24:24 Received message from Camera: op=State serial=120732 10:24:24 GetSingleValue result=40 Value=cccccccc 10:24:24 SkyScan query 10:24:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:24:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:24 Parameters OK 10:24:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:24 Set A/D data flow result=40 10:24:24 Set A/D channel type result=40 10:24:24 Set A/D encoding result=40 10:24:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:24 Set channel filter=0.000000e+000 result=40 10:24:24 Config A/D Result=40 10:24:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:24 Get A/D filter: -9.255963e+061 result=40 10:24:24 Get A/D value=-858993460 result=40 10:24:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:24 Parameters OK 10:24:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:24 Set A/D data flow result=40 10:24:24 Set A/D channel type result=40 10:24:24 Set A/D encoding result=40 10:24:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:24 Set channel filter=0.000000e+000 result=40 10:24:24 Config A/D Result=40 10:24:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:24 Get A/D filter: -9.255963e+061 result=40 10:24:24 Get A/D value=-858993460 result=40 10:24:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:24:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:24:24 Aux= 10:24:24 Message to Camera, serial 120732 queued 10:25:01 Received message from Master: op=PointingHead serial=120745 10:25:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:25:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:25:02 Point started: ret=0 10:25:02 point_skyscan result=0 10:25:02 Check angles 10:25:02 SkyScan query 10:25:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.715<-13581 Statuses=0008 0009 10:25:03 Msec=0 True Az=112.995 Ze=-23.715 Az status=0008 Ze status=0009 10:25:03 Check angles 10:25:03 SkyScan query 10:25:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.09<-15006 Statuses=0008 0009 10:25:04 Msec=750 True Az=112.995 Ze=-45.09 Az status=0008 Ze status=0009 10:25:04 Check angles 10:25:04 SkyScan query 10:25:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.075<-16405 Statuses=0008 0009 10:25:04 Msec=1500 True Az=112.995 Ze=-66.075 Az status=0008 Ze status=0009 10:25:05 Check angles 10:25:05 SkyScan query 10:25:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.045<-17803 Statuses=0008 0009 10:25:05 Msec=2250 True Az=112.995 Ze=-87.045 Az status=0008 Ze status=0009 10:25:05 Check angles 10:25:05 SkyScan query 10:25:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.45<-19230 Statuses=0008 0009 10:25:06 Msec=3000 True Az=112.995 Ze=-108.45 Az status=0008 Ze status=0009 10:25:06 Check angles 10:25:06 SkyScan query 10:25:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.795<-20653 Statuses=0008 0009 10:25:07 Msec=3750 True Az=112.995 Ze=-129.795 Az status=0008 Ze status=0009 10:25:07 Check angles 10:25:07 SkyScan query 10:25:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.705<-22047 Statuses=0008 0009 10:25:08 Msec=4500 True Az=112.995 Ze=-150.705 Az status=0008 Ze status=0009 10:25:08 Check angles 10:25:08 SkyScan query 10:25:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.42<-23428 Statuses=0008 0009 10:25:08 Msec=5250 True Az=112.995 Ze=-171.42 Az status=0008 Ze status=0009 10:25:08 Check angles 10:25:08 SkyScan query 10:25:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:25:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:25:09 Message to Master queued w/err=0: serial=120745 error=0 10:25:14 Received message from Master: op=Filter serial=120746 10:25:14 Color wheel filter change from 0 to 0 10:25:14 FLIGetFilterPos err=0 currentPosition=0 10:25:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:25:14 Filter is already there-color wheel unchanged 10:25:14 Received message from Master: op=Shutter serial=120747 10:25:14 Shutter LASER open 10:25:14 Received message from Camera: op=State serial=120749 10:25:14 GetSingleValue result=40 Value=cccccccc 10:25:14 SkyScan query 10:25:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:25:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:15 Parameters OK 10:25:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:15 Set A/D data flow result=40 10:25:15 Set A/D channel type result=40 10:25:15 Set A/D encoding result=40 10:25:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:15 Set channel filter=0.000000e+000 result=40 10:25:15 Config A/D Result=40 10:25:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:15 Get A/D filter: -9.255963e+061 result=40 10:25:15 Get A/D value=-858993460 result=40 10:25:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:15 Parameters OK 10:25:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:15 Set A/D data flow result=40 10:25:15 Set A/D channel type result=40 10:25:15 Set A/D encoding result=40 10:25:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:15 Set channel filter=0.000000e+000 result=40 10:25:15 Config A/D Result=40 10:25:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:15 Get A/D filter: -9.255963e+061 result=40 10:25:15 Get A/D value=-858993460 result=40 10:25:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:25:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:25:15 Aux= 10:25:15 Message to Camera, serial 120749 queued 10:25:23 Received message from Master: op=Shutter serial=120759 10:25:23 Shutter LASER close 10:25:24 Received message from Master: op=PointingHead serial=120763 10:25:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:25:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:25:24 Point started: ret=0 10:25:24 point_skyscan result=0 10:25:25 Check angles 10:25:25 SkyScan query 10:25:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 10:25:25 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 10:25:26 Check angles 10:25:26 SkyScan query 10:25:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.265<-20151 Statuses=0008 0009 10:25:26 Msec=750 True Az=112.995 Ze=-122.265 Az status=0008 Ze status=0009 10:25:26 Check angles 10:25:26 SkyScan query 10:25:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.34<-18756 Statuses=0008 0009 10:25:27 Msec=1500 True Az=112.995 Ze=-101.34 Az status=0008 Ze status=0009 10:25:27 Check angles 10:25:27 SkyScan query 10:25:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.25<-17350 Statuses=0008 0009 10:25:28 Msec=2250 True Az=112.995 Ze=-80.25 Az status=0008 Ze status=0009 10:25:28 Check angles 10:25:28 SkyScan query 10:25:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.4<-15960 Statuses=0008 0009 10:25:28 Msec=3000 True Az=112.995 Ze=-59.4 Az status=0008 Ze status=0009 10:25:29 Check angles 10:25:29 SkyScan query 10:25:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.4<-14560 Statuses=0008 0009 10:25:29 Msec=3750 True Az=112.995 Ze=-38.4 Az status=0008 Ze status=0009 10:25:29 Check angles 10:25:29 SkyScan query 10:25:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.965<-13131 Statuses=0008 0009 10:25:30 Msec=4500 True Az=112.995 Ze=-16.965 Az status=0008 Ze status=0009 10:25:30 Check angles 10:25:30 SkyScan query 10:25:31 SkyScan query done: ret=0 az=112.995<-7533 ze=3.975<-11735 Statuses=0008 0009 10:25:31 Msec=5250 True Az=112.995 Ze=3.975 Az status=0008 Ze status=0009 10:25:31 Check angles 10:25:31 SkyScan query 10:25:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:25:31 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:25:31 Message to Master queued w/err=0: serial=120763 error=0 10:25:36 Received message from Master: op=Filter serial=120764 10:25:36 Color wheel filter change from 0 to 0 10:25:36 FLIGetFilterPos err=0 currentPosition=0 10:25:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:25:36 Filter is already there-color wheel unchanged 10:25:37 Received message from Master: op=Shutter serial=120765 10:25:37 Shutter LASER close 10:25:37 Received message from Camera: op=State serial=120767 10:25:37 GetSingleValue result=40 Value=cccccccc 10:25:37 SkyScan query 10:25:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:25:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:37 Parameters OK 10:25:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:37 Set A/D data flow result=40 10:25:37 Set A/D channel type result=40 10:25:37 Set A/D encoding result=40 10:25:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:37 Set channel filter=0.000000e+000 result=40 10:25:37 Config A/D Result=40 10:25:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:37 Get A/D filter: -9.255963e+061 result=40 10:25:37 Get A/D value=-858993460 result=40 10:25:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:37 Parameters OK 10:25:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:37 Set A/D data flow result=40 10:25:37 Set A/D channel type result=40 10:25:37 Set A/D encoding result=40 10:25:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:37 Set channel filter=0.000000e+000 result=40 10:25:37 Config A/D Result=40 10:25:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:37 Get A/D filter: -9.255963e+061 result=40 10:25:37 Get A/D value=-858993460 result=40 10:25:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:25:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:25:37 Aux= 10:25:37 Message to Camera, serial 120767 queued 10:26:14 Received message from Master: op=PointingHead serial=120780 10:26:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:26:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:26:15 Point started: ret=0 10:26:15 point_skyscan result=0 10:26:15 Check angles 10:26:15 SkyScan query 10:26:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:26:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:26:16 Message to Master queued w/err=0: serial=120780 error=0 10:26:21 Received message from Master: op=Filter serial=120781 10:26:21 Color wheel filter change from 0 to 0 10:26:21 FLIGetFilterPos err=0 currentPosition=0 10:26:21 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:21 Filter is already there-color wheel unchanged 10:26:21 Received message from Master: op=Shutter serial=120782 10:26:21 Shutter LASER close 10:26:21 Received message from Camera: op=State serial=120784 10:26:21 GetSingleValue result=40 Value=cccccccc 10:26:21 SkyScan query 10:26:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:26:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:22 Parameters OK 10:26:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:22 Set A/D data flow result=40 10:26:22 Set A/D channel type result=40 10:26:22 Set A/D encoding result=40 10:26:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:22 Set channel filter=0.000000e+000 result=40 10:26:22 Config A/D Result=40 10:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:22 Get A/D filter: -9.255963e+061 result=40 10:26:22 Get A/D value=-858993460 result=40 10:26:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:22 Parameters OK 10:26:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:22 Set A/D data flow result=40 10:26:22 Set A/D channel type result=40 10:26:22 Set A/D encoding result=40 10:26:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:22 Set channel filter=0.000000e+000 result=40 10:26:22 Config A/D Result=40 10:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:22 Get A/D filter: -9.255963e+061 result=40 10:26:22 Get A/D value=-858993460 result=40 10:26:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:22 Aux= 10:26:22 Message to Camera, serial 120784 queued 10:26:59 Received message from Master: op=PointingHead serial=120797 10:26:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:26:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:26:59 Point started: ret=0 10:26:59 point_skyscan result=0 10:27:00 Check angles 10:27:00 SkyScan query 10:27:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:27:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:27:00 Message to Master queued w/err=0: serial=120797 error=0 10:27:05 Received message from Master: op=Filter serial=120798 10:27:05 Color wheel filter change from 0 to 0 10:27:05 FLIGetFilterPos err=0 currentPosition=0 10:27:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:05 Filter is already there-color wheel unchanged 10:27:05 Received message from Master: op=Shutter serial=120799 10:27:05 Shutter LASER close 10:27:05 Received message from Camera: op=State serial=120801 10:27:05 GetSingleValue result=40 Value=cccccccc 10:27:05 SkyScan query 10:27:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:27:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:06 Parameters OK 10:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:06 Set A/D data flow result=40 10:27:06 Set A/D channel type result=40 10:27:06 Set A/D encoding result=40 10:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:06 Set channel filter=0.000000e+000 result=40 10:27:06 Config A/D Result=40 10:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:06 Get A/D filter: -9.255963e+061 result=40 10:27:06 Get A/D value=-858993460 result=40 10:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:06 Parameters OK 10:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:06 Set A/D data flow result=40 10:27:06 Set A/D channel type result=40 10:27:06 Set A/D encoding result=40 10:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:06 Set channel filter=0.000000e+000 result=40 10:27:06 Config A/D Result=40 10:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:06 Get A/D filter: -9.255963e+061 result=40 10:27:06 Get A/D value=-858993460 result=40 10:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:06 Aux= 10:27:06 Message to Camera, serial 120801 queued 10:27:43 Received message from Master: op=PointingHead serial=120814 10:27:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:27:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:27:43 Point started: ret=0 10:27:43 point_skyscan result=0 10:27:44 Check angles 10:27:44 SkyScan query 10:27:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:27:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:27:44 Message to Master queued w/err=0: serial=120814 error=0 10:27:49 Received message from Master: op=Filter serial=120815 10:27:49 Color wheel filter change from 0 to 0 10:27:49 FLIGetFilterPos err=0 currentPosition=0 10:27:49 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:49 Filter is already there-color wheel unchanged 10:27:50 Received message from Master: op=Shutter serial=120816 10:27:50 Shutter LASER close 10:27:50 Received message from Camera: op=State serial=120818 10:27:50 GetSingleValue result=40 Value=cccccccc 10:27:50 SkyScan query 10:27:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:27:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:50 Parameters OK 10:27:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:50 Set A/D data flow result=40 10:27:50 Set A/D channel type result=40 10:27:50 Set A/D encoding result=40 10:27:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:50 Set channel filter=0.000000e+000 result=40 10:27:50 Config A/D Result=40 10:27:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:50 Get A/D filter: -9.255963e+061 result=40 10:27:50 Get A/D value=-858993460 result=40 10:27:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:50 Parameters OK 10:27:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:50 Set A/D data flow result=40 10:27:50 Set A/D channel type result=40 10:27:50 Set A/D encoding result=40 10:27:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:50 Set channel filter=0.000000e+000 result=40 10:27:50 Config A/D Result=40 10:27:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:50 Get A/D filter: -9.255963e+061 result=40 10:27:50 Get A/D value=-858993460 result=40 10:27:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:50 Aux= 10:27:50 Message to Camera, serial 120818 queued 10:28:27 Received message from Master: op=PointingHead serial=120831 10:28:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:28:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:28:27 Point started: ret=0 10:28:27 point_skyscan result=0 10:28:28 Check angles 10:28:28 SkyScan query 10:28:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 10:28:29 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 10:28:29 Check angles 10:28:29 SkyScan query 10:28:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.295<-14953 Statuses=0008 0009 10:28:30 Msec=750 True Az=112.995 Ze=-44.295 Az status=0008 Ze status=0009 10:28:30 Check angles 10:28:30 SkyScan query 10:28:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 10:28:30 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 10:28:30 Check angles 10:28:30 SkyScan query 10:28:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.595<-17773 Statuses=0008 0009 10:28:31 Msec=2250 True Az=112.995 Ze=-86.595 Az status=0008 Ze status=0009 10:28:31 Check angles 10:28:31 SkyScan query 10:28:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.55<-19170 Statuses=0008 0009 10:28:32 Msec=3000 True Az=112.995 Ze=-107.55 Az status=0008 Ze status=0009 10:28:32 Check angles 10:28:32 SkyScan query 10:28:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.505<-20567 Statuses=0008 0009 10:28:33 Msec=3750 True Az=112.995 Ze=-128.505 Az status=0008 Ze status=0009 10:28:33 Check angles 10:28:33 SkyScan query 10:28:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.505<-21967 Statuses=0008 0009 10:28:33 Msec=4500 True Az=112.995 Ze=-149.505 Az status=0008 Ze status=0009 10:28:33 Check angles 10:28:33 SkyScan query 10:28:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.445<-23363 Statuses=0008 0009 10:28:34 Msec=5250 True Az=112.995 Ze=-170.445 Az status=0008 Ze status=0009 10:28:34 Check angles 10:28:34 SkyScan query 10:28:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:28:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:28:35 Message to Master queued w/err=0: serial=120831 error=0 10:28:40 Received message from Master: op=Filter serial=120832 10:28:40 Color wheel filter change from 0 to 0 10:28:40 FLIGetFilterPos err=0 currentPosition=0 10:28:40 FLIGetStepsRemaining err=0 RemainingSteps=0 10:28:40 Filter is already there-color wheel unchanged 10:28:40 Received message from Master: op=Shutter serial=120833 10:28:40 Shutter LASER open 10:28:40 Received message from Camera: op=State serial=120835 10:28:40 GetSingleValue result=40 Value=cccccccc 10:28:40 SkyScan query 10:28:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:28:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:41 Parameters OK 10:28:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:41 Set A/D data flow result=40 10:28:41 Set A/D channel type result=40 10:28:41 Set A/D encoding result=40 10:28:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:41 Set channel filter=0.000000e+000 result=40 10:28:41 Config A/D Result=40 10:28:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:41 Get A/D filter: -9.255963e+061 result=40 10:28:41 Get A/D value=-858993460 result=40 10:28:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:41 Parameters OK 10:28:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:41 Set A/D data flow result=40 10:28:41 Set A/D channel type result=40 10:28:41 Set A/D encoding result=40 10:28:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:41 Set channel filter=0.000000e+000 result=40 10:28:41 Config A/D Result=40 10:28:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:41 Get A/D filter: -9.255963e+061 result=40 10:28:41 Get A/D value=-858993460 result=40 10:28:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:28:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:28:41 Aux= 10:28:41 Message to Camera, serial 120835 queued 10:28:49 Received message from Master: op=Shutter serial=120845 10:28:49 Shutter LASER close 10:28:50 Received message from Master: op=PointingHead serial=120849 10:28:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:28:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:28:50 Point started: ret=0 10:28:50 point_skyscan result=0 10:28:51 Check angles 10:28:51 SkyScan query 10:28:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 10:28:52 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 10:28:52 Check angles 10:28:52 SkyScan query 10:28:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.31<-20154 Statuses=0008 0009 10:28:52 Msec=750 True Az=112.995 Ze=-122.31 Az status=0008 Ze status=0009 10:28:53 Check angles 10:28:53 SkyScan query 10:28:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 10:28:53 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 10:28:53 Check angles 10:28:53 SkyScan query 10:28:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.92<-17328 Statuses=0008 0009 10:28:54 Msec=2250 True Az=112.995 Ze=-79.92 Az status=0008 Ze status=0009 10:28:54 Check angles 10:28:54 SkyScan query 10:28:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.965<-15931 Statuses=0008 0009 10:28:55 Msec=3000 True Az=112.995 Ze=-58.965 Az status=0008 Ze status=0009 10:28:55 Check angles 10:28:55 SkyScan query 10:28:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.965<-14531 Statuses=0008 0009 10:28:55 Msec=3750 True Az=112.995 Ze=-37.965 Az status=0008 Ze status=0009 10:28:56 Check angles 10:28:56 SkyScan query 10:28:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.59<-13106 Statuses=0008 0009 10:28:56 Msec=4500 True Az=112.995 Ze=-16.59 Az status=0008 Ze status=0009 10:28:56 Check angles 10:28:56 SkyScan query 10:28:57 SkyScan query done: ret=0 az=112.995<-7533 ze=4.29<-11714 Statuses=0008 0009 10:28:57 Msec=5250 True Az=112.995 Ze=4.29 Az status=0008 Ze status=0009 10:28:57 Check angles 10:28:57 SkyScan query 10:28:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:28:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:28:58 Message to Master queued w/err=0: serial=120849 error=0 10:29:03 Received message from Master: op=Filter serial=120850 10:29:03 Color wheel filter change from 0 to 0 10:29:03 FLIGetFilterPos err=0 currentPosition=0 10:29:03 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:03 Filter is already there-color wheel unchanged 10:29:03 Received message from Master: op=Shutter serial=120851 10:29:03 Shutter LASER close 10:29:03 Received message from Camera: op=State serial=120853 10:29:03 GetSingleValue result=40 Value=cccccccc 10:29:03 SkyScan query 10:29:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:29:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:04 Parameters OK 10:29:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:04 Set A/D data flow result=40 10:29:04 Set A/D channel type result=40 10:29:04 Set A/D encoding result=40 10:29:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:04 Set channel filter=0.000000e+000 result=40 10:29:04 Config A/D Result=40 10:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:04 Get A/D filter: -9.255963e+061 result=40 10:29:04 Get A/D value=-858993460 result=40 10:29:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:04 Parameters OK 10:29:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:04 Set A/D data flow result=40 10:29:04 Set A/D channel type result=40 10:29:04 Set A/D encoding result=40 10:29:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:04 Set channel filter=0.000000e+000 result=40 10:29:04 Config A/D Result=40 10:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:04 Get A/D filter: -9.255963e+061 result=40 10:29:04 Get A/D value=-858993460 result=40 10:29:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:04 Aux= 10:29:04 Message to Camera, serial 120853 queued 10:29:40 Received message from Master: op=PointingHead serial=120866 10:29:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:29:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:29:41 Point started: ret=0 10:29:41 point_skyscan result=0 10:29:41 Check angles 10:29:41 SkyScan query 10:29:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:29:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:29:42 Message to Master queued w/err=0: serial=120866 error=0 10:29:47 Received message from Master: op=Filter serial=120867 10:29:47 Color wheel filter change from 0 to 0 10:29:47 FLIGetFilterPos err=0 currentPosition=0 10:29:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:47 Filter is already there-color wheel unchanged 10:29:47 Received message from Master: op=Shutter serial=120868 10:29:47 Shutter LASER close 10:29:47 Received message from Camera: op=State serial=120870 10:29:47 GetSingleValue result=40 Value=cccccccc 10:29:47 SkyScan query 10:29:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:29:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:48 Parameters OK 10:29:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:48 Set A/D data flow result=40 10:29:48 Set A/D channel type result=40 10:29:48 Set A/D encoding result=40 10:29:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:48 Set channel filter=0.000000e+000 result=40 10:29:48 Config A/D Result=40 10:29:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:48 Get A/D filter: -9.255963e+061 result=40 10:29:48 Get A/D value=-858993460 result=40 10:29:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:48 Parameters OK 10:29:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:48 Set A/D data flow result=40 10:29:48 Set A/D channel type result=40 10:29:48 Set A/D encoding result=40 10:29:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:48 Set channel filter=0.000000e+000 result=40 10:29:48 Config A/D Result=40 10:29:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:48 Get A/D filter: -9.255963e+061 result=40 10:29:48 Get A/D value=-858993460 result=40 10:29:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:48 Aux= 10:29:48 Message to Camera, serial 120870 queued 10:30:25 Received message from Master: op=PointingHead serial=120883 10:30:25 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:30:25 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:30:25 Point started: ret=0 10:30:25 point_skyscan result=0 10:30:26 Check angles 10:30:26 SkyScan query 10:30:26 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 10:30:26 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 10:30:27 Check angles 10:30:27 SkyScan query 10:30:27 SkyScan query done: ret=0 az=153.915<-10261 ze=-6.495<-12433 Statuses=0009 0008 10:30:27 Msec=750 True Az=153.915 Ze=-6.495 Az status=0009 Ze status=0008 10:30:27 Check angles 10:30:27 SkyScan query 10:30:28 SkyScan query done: ret=0 az=171.39<-11426 ze=-6.495<-12433 Statuses=0009 0008 10:30:28 Msec=1500 True Az=171.39 Ze=-6.495 Az status=0009 Ze status=0008 10:30:28 Check angles 10:30:28 SkyScan query 10:30:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:30:29 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:30:29 Message to Master queued w/err=0: serial=120883 error=0 10:30:34 Received message from Master: op=Filter serial=120884 10:30:34 Color wheel filter change from 0 to 0 10:30:34 FLIGetFilterPos err=0 currentPosition=0 10:30:34 FLIGetStepsRemaining err=0 RemainingSteps=0 10:30:34 Filter is already there-color wheel unchanged 10:30:34 Received message from Master: op=Shutter serial=120885 10:30:34 Shutter LASER close 10:30:34 Received message from Camera: op=State serial=120887 10:30:34 GetSingleValue result=40 Value=cccccccc 10:30:34 SkyScan query 10:30:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:30:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:34 Parameters OK 10:30:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:34 Set A/D data flow result=40 10:30:34 Set A/D channel type result=40 10:30:34 Set A/D encoding result=40 10:30:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:34 Set channel filter=0.000000e+000 result=40 10:30:34 Config A/D Result=40 10:30:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:34 Get A/D filter: -9.255963e+061 result=40 10:30:34 Get A/D value=-858993460 result=40 10:30:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:34 Parameters OK 10:30:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:34 Set A/D data flow result=40 10:30:34 Set A/D channel type result=40 10:30:34 Set A/D encoding result=40 10:30:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:34 Set channel filter=0.000000e+000 result=40 10:30:34 Config A/D Result=40 10:30:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:34 Get A/D filter: -9.255963e+061 result=40 10:30:34 Get A/D value=-858993460 result=40 10:30:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:30:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:30:34 Aux= 10:30:34 Message to Camera, serial 120887 queued 10:31:11 Received message from Master: op=PointingHead serial=120900 10:31:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:31:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:31:12 Point started: ret=0 10:31:12 point_skyscan result=0 10:31:12 Check angles 10:31:12 SkyScan query 10:31:13 SkyScan query done: ret=0 az=152.85<-10190 ze=6.51<-11566 Statuses=0009 0008 10:31:13 Msec=0 True Az=152.85 Ze=6.51 Az status=0009 Ze status=0008 10:31:13 Check angles 10:31:13 SkyScan query 10:31:14 SkyScan query done: ret=0 az=135.105<-9007 ze=6.495<-11567 Statuses=0009 0008 10:31:14 Msec=750 True Az=135.105 Ze=6.495 Az status=0009 Ze status=0008 10:31:14 Check angles 10:31:14 SkyScan query 10:31:14 SkyScan query done: ret=0 az=117.675<-7845 ze=6.495<-11567 Statuses=0009 0008 10:31:14 Msec=1500 True Az=117.675 Ze=6.495 Az status=0009 Ze status=0008 10:31:15 Check angles 10:31:15 SkyScan query 10:31:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:31:15 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:31:15 Message to Master queued w/err=0: serial=120900 error=0 10:31:20 Received message from Master: op=Filter serial=120901 10:31:20 Color wheel filter change from 0 to 0 10:31:20 FLIGetFilterPos err=0 currentPosition=0 10:31:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:31:20 Filter is already there-color wheel unchanged 10:31:20 Received message from Master: op=Shutter serial=120902 10:31:20 Shutter LASER close 10:31:20 Received message from Camera: op=State serial=120904 10:31:20 GetSingleValue result=40 Value=cccccccc 10:31:20 SkyScan query 10:31:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:31:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:21 Parameters OK 10:31:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:21 Set A/D data flow result=40 10:31:21 Set A/D channel type result=40 10:31:21 Set A/D encoding result=40 10:31:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:21 Set channel filter=0.000000e+000 result=40 10:31:21 Config A/D Result=40 10:31:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:21 Get A/D filter: -9.255963e+061 result=40 10:31:21 Get A/D value=-858993460 result=40 10:31:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:21 Parameters OK 10:31:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:21 Set A/D data flow result=40 10:31:21 Set A/D channel type result=40 10:31:21 Set A/D encoding result=40 10:31:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:21 Set channel filter=0.000000e+000 result=40 10:31:21 Config A/D Result=40 10:31:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:21 Get A/D filter: -9.255963e+061 result=40 10:31:21 Get A/D value=-858993460 result=40 10:31:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:31:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:31:21 Aux= 10:31:21 Message to Camera, serial 120904 queued 10:31:58 Received message from Master: op=PointingHead serial=120917 10:31:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:31:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:31:58 Point started: ret=0 10:31:58 point_skyscan result=0 10:31:59 Check angles 10:31:59 SkyScan query 10:31:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 10:31:59 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 10:32:00 Check angles 10:32:00 SkyScan query 10:32:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.385<-14959 Statuses=0008 0009 10:32:00 Msec=750 True Az=112.995 Ze=-44.385 Az status=0008 Ze status=0009 10:32:00 Check angles 10:32:00 SkyScan query 10:32:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.745<-16383 Statuses=0008 0009 10:32:01 Msec=1500 True Az=112.995 Ze=-65.745 Az status=0008 Ze status=0009 10:32:01 Check angles 10:32:01 SkyScan query 10:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.715<-17781 Statuses=0008 0009 10:32:02 Msec=2250 True Az=112.995 Ze=-86.715 Az status=0008 Ze status=0009 10:32:02 Check angles 10:32:02 SkyScan query 10:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.715<-19181 Statuses=0008 0009 10:32:02 Msec=3000 True Az=112.995 Ze=-107.715 Az status=0008 Ze status=0009 10:32:03 Check angles 10:32:03 SkyScan query 10:32:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.655<-20577 Statuses=0008 0009 10:32:03 Msec=3750 True Az=112.995 Ze=-128.655 Az status=0008 Ze status=0009 10:32:03 Check angles 10:32:03 SkyScan query 10:32:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.64<-21976 Statuses=0008 0009 10:32:04 Msec=4500 True Az=112.995 Ze=-149.64 Az status=0008 Ze status=0009 10:32:04 Check angles 10:32:04 SkyScan query 10:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.565<-23371 Statuses=0008 0009 10:32:05 Msec=5250 True Az=112.995 Ze=-170.565 Az status=0008 Ze status=0009 10:32:05 Check angles 10:32:05 SkyScan query 10:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:32:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:32:05 Message to Master queued w/err=0: serial=120917 error=0 10:32:10 Received message from Master: op=Filter serial=120918 10:32:10 Color wheel filter change from 0 to 0 10:32:10 FLIGetFilterPos err=0 currentPosition=0 10:32:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:32:10 Filter is already there-color wheel unchanged 10:32:11 Received message from Master: op=Shutter serial=120919 10:32:11 Shutter LASER open 10:32:11 Received message from Camera: op=State serial=120921 10:32:11 GetSingleValue result=40 Value=cccccccc 10:32:11 SkyScan query 10:32:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:32:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:11 Parameters OK 10:32:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:11 Set A/D data flow result=40 10:32:11 Set A/D channel type result=40 10:32:11 Set A/D encoding result=40 10:32:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:11 Set channel filter=0.000000e+000 result=40 10:32:11 Config A/D Result=40 10:32:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:11 Get A/D filter: -9.255963e+061 result=40 10:32:11 Get A/D value=-858993460 result=40 10:32:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:11 Parameters OK 10:32:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:11 Set A/D data flow result=40 10:32:11 Set A/D channel type result=40 10:32:11 Set A/D encoding result=40 10:32:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:11 Set channel filter=0.000000e+000 result=40 10:32:11 Config A/D Result=40 10:32:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:11 Get A/D filter: -9.255963e+061 result=40 10:32:11 Get A/D value=-858993460 result=40 10:32:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:32:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:32:11 Aux= 10:32:11 Message to Camera, serial 120921 queued 10:32:20 Received message from Master: op=Shutter serial=120931 10:32:20 Shutter LASER close 10:32:20 Received message from Master: op=PointingHead serial=120935 10:32:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:32:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:32:21 Point started: ret=0 10:32:21 point_skyscan result=0 10:32:21 Check angles 10:32:21 SkyScan query 10:32:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 10:32:22 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 10:32:22 Check angles 10:32:22 SkyScan query 10:32:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.49<-20166 Statuses=0008 0009 10:32:23 Msec=750 True Az=112.995 Ze=-122.49 Az status=0008 Ze status=0009 10:32:23 Check angles 10:32:23 SkyScan query 10:32:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 10:32:23 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 10:32:24 Check angles 10:32:24 SkyScan query 10:32:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 10:32:24 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 10:32:24 Check angles 10:32:24 SkyScan query 10:32:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.175<-15945 Statuses=0008 0009 10:32:25 Msec=3000 True Az=112.995 Ze=-59.175 Az status=0008 Ze status=0009 10:32:25 Check angles 10:32:25 SkyScan query 10:32:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.145<-14543 Statuses=0008 0009 10:32:26 Msec=3750 True Az=112.995 Ze=-38.145 Az status=0008 Ze status=0009 10:32:26 Check angles 10:32:26 SkyScan query 10:32:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.205<-13147 Statuses=0008 0009 10:32:26 Msec=4500 True Az=112.995 Ze=-17.205 Az status=0008 Ze status=0009 10:32:27 Check angles 10:32:27 SkyScan query 10:32:27 SkyScan query done: ret=0 az=112.995<-7533 ze=3.765<-11749 Statuses=0008 0009 10:32:27 Msec=5250 True Az=112.995 Ze=3.765 Az status=0008 Ze status=0009 10:32:27 Check angles 10:32:27 SkyScan query 10:32:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:32:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:32:28 Message to Master queued w/err=0: serial=120935 error=0 10:32:33 Received message from Master: op=Filter serial=120936 10:32:33 Color wheel filter change from 0 to 0 10:32:33 FLIGetFilterPos err=0 currentPosition=0 10:32:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:32:33 Filter is already there-color wheel unchanged 10:32:33 Received message from Master: op=Shutter serial=120937 10:32:33 Shutter LASER close 10:32:33 Received message from Camera: op=State serial=120939 10:32:33 GetSingleValue result=40 Value=cccccccc 10:32:33 SkyScan query 10:32:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:32:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:34 Parameters OK 10:32:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:34 Set A/D data flow result=40 10:32:34 Set A/D channel type result=40 10:32:34 Set A/D encoding result=40 10:32:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:34 Set channel filter=0.000000e+000 result=40 10:32:34 Config A/D Result=40 10:32:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:34 Get A/D filter: -9.255963e+061 result=40 10:32:34 Get A/D value=-858993460 result=40 10:32:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:34 Parameters OK 10:32:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:34 Set A/D data flow result=40 10:32:34 Set A/D channel type result=40 10:32:34 Set A/D encoding result=40 10:32:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:34 Set channel filter=0.000000e+000 result=40 10:32:34 Config A/D Result=40 10:32:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:34 Get A/D filter: -9.255963e+061 result=40 10:32:34 Get A/D value=-858993460 result=40 10:32:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:32:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:32:34 Aux= 10:32:34 Message to Camera, serial 120939 queued 10:33:11 Received message from Master: op=PointingHead serial=120952 10:33:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:33:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:33:11 Point started: ret=0 10:33:11 point_skyscan result=0 10:33:12 Check angles 10:33:12 SkyScan query 10:33:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:33:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:33:12 Message to Master queued w/err=0: serial=120952 error=0 10:33:17 Received message from Master: op=Filter serial=120953 10:33:17 Color wheel filter change from 0 to 0 10:33:17 FLIGetFilterPos err=0 currentPosition=0 10:33:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:33:17 Filter is already there-color wheel unchanged 10:33:18 Received message from Master: op=Shutter serial=120954 10:33:18 Shutter LASER close 10:33:18 Received message from Camera: op=State serial=120956 10:33:18 GetSingleValue result=40 Value=cccccccc 10:33:18 SkyScan query 10:33:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:33:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:18 Parameters OK 10:33:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:18 Set A/D data flow result=40 10:33:18 Set A/D channel type result=40 10:33:18 Set A/D encoding result=40 10:33:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:18 Set channel filter=0.000000e+000 result=40 10:33:18 Config A/D Result=40 10:33:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:18 Get A/D filter: -9.255963e+061 result=40 10:33:18 Get A/D value=-858993460 result=40 10:33:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:18 Parameters OK 10:33:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:18 Set A/D data flow result=40 10:33:18 Set A/D channel type result=40 10:33:18 Set A/D encoding result=40 10:33:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:18 Set channel filter=0.000000e+000 result=40 10:33:18 Config A/D Result=40 10:33:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:18 Get A/D filter: -9.255963e+061 result=40 10:33:18 Get A/D value=-858993460 result=40 10:33:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:33:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:33:18 Aux= 10:33:18 Message to Camera, serial 120956 queued 10:33:38 Received message from Master: op=Identify serial=120957 10:33:54 Received message from Master: op=PointingHead serial=120971 10:33:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:33:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:33:54 Point started: ret=0 10:33:54 point_skyscan result=0 10:33:55 Check angles 10:33:55 SkyScan query 10:33:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:33:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:33:56 Message to Master queued w/err=0: serial=120971 error=0 10:34:01 Received message from Master: op=Filter serial=120972 10:34:01 Color wheel filter change from 0 to 0 10:34:01 FLIGetFilterPos err=0 currentPosition=0 10:34:01 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:01 Filter is already there-color wheel unchanged 10:34:01 Received message from Master: op=Shutter serial=120973 10:34:01 Shutter LASER close 10:34:01 Received message from Camera: op=State serial=120975 10:34:01 GetSingleValue result=40 Value=cccccccc 10:34:01 SkyScan query 10:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:34:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:02 Parameters OK 10:34:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:02 Set A/D data flow result=40 10:34:02 Set A/D channel type result=40 10:34:02 Set A/D encoding result=40 10:34:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:02 Set channel filter=0.000000e+000 result=40 10:34:02 Config A/D Result=40 10:34:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:02 Get A/D filter: -9.255963e+061 result=40 10:34:02 Get A/D value=-858993460 result=40 10:34:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:02 Parameters OK 10:34:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:02 Set A/D data flow result=40 10:34:02 Set A/D channel type result=40 10:34:02 Set A/D encoding result=40 10:34:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:02 Set channel filter=0.000000e+000 result=40 10:34:02 Config A/D Result=40 10:34:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:02 Get A/D filter: -9.255963e+061 result=40 10:34:02 Get A/D value=-858993460 result=40 10:34:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:02 Aux= [UTC 2019-3-5 10:34:02] 10:34:02 Message to Camera, serial 120975 queued 10:34:38 Received message from Master: op=PointingHead serial=120988 10:34:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:34:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:34:39 Point started: ret=0 10:34:39 point_skyscan result=0 10:34:39 Check angles 10:34:39 SkyScan query 10:34:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:34:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:34:40 Message to Master queued w/err=0: serial=120988 error=0 10:34:45 Received message from Master: op=Filter serial=120989 10:34:45 Color wheel filter change from 0 to 0 10:34:45 FLIGetFilterPos err=0 currentPosition=0 10:34:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:45 Filter is already there-color wheel unchanged 10:34:45 Received message from Master: op=Shutter serial=120990 10:34:45 Shutter LASER close 10:34:45 Received message from Camera: op=State serial=120992 10:34:45 GetSingleValue result=40 Value=cccccccc 10:34:45 SkyScan query 10:34:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:34:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:46 Parameters OK 10:34:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:46 Set A/D data flow result=40 10:34:46 Set A/D channel type result=40 10:34:46 Set A/D encoding result=40 10:34:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:46 Set channel filter=0.000000e+000 result=40 10:34:46 Config A/D Result=40 10:34:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:46 Get A/D filter: -9.255963e+061 result=40 10:34:46 Get A/D value=-858993460 result=40 10:34:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:46 Parameters OK 10:34:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:46 Set A/D data flow result=40 10:34:46 Set A/D channel type result=40 10:34:46 Set A/D encoding result=40 10:34:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:46 Set channel filter=0.000000e+000 result=40 10:34:46 Config A/D Result=40 10:34:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:46 Get A/D filter: -9.255963e+061 result=40 10:34:46 Get A/D value=-858993460 result=40 10:34:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:46 Aux= 10:34:46 Message to Camera, serial 120992 queued 10:35:23 Received message from Master: op=PointingHead serial=121005 10:35:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:35:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:35:23 Point started: ret=0 10:35:23 point_skyscan result=0 10:35:24 Check angles 10:35:24 SkyScan query 10:35:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.19<-13546 Statuses=0008 0009 10:35:24 Msec=0 True Az=112.995 Ze=-23.19 Az status=0008 Ze status=0009 10:35:24 Check angles 10:35:24 SkyScan query 10:35:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.16<-14944 Statuses=0008 0009 10:35:25 Msec=750 True Az=112.995 Ze=-44.16 Az status=0008 Ze status=0009 10:35:25 Check angles 10:35:25 SkyScan query 10:35:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.07<-16338 Statuses=0008 0009 10:35:26 Msec=1500 True Az=112.995 Ze=-65.07 Az status=0008 Ze status=0009 10:35:26 Check angles 10:35:26 SkyScan query 10:35:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.01<-17734 Statuses=0008 0009 10:35:27 Msec=2250 True Az=112.995 Ze=-86.01 Az status=0008 Ze status=0009 10:35:27 Check angles 10:35:27 SkyScan query 10:35:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.95<-19130 Statuses=0008 0009 10:35:27 Msec=3000 True Az=112.995 Ze=-106.95 Az status=0008 Ze status=0009 10:35:27 Check angles 10:35:27 SkyScan query 10:35:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.905<-20527 Statuses=0008 0009 10:35:28 Msec=3750 True Az=112.995 Ze=-127.905 Az status=0008 Ze status=0009 10:35:28 Check angles 10:35:28 SkyScan query 10:35:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.845<-21923 Statuses=0008 0009 10:35:29 Msec=4500 True Az=112.995 Ze=-148.845 Az status=0008 Ze status=0009 10:35:29 Check angles 10:35:29 SkyScan query 10:35:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.785<-23319 Statuses=0008 0009 10:35:30 Msec=5250 True Az=112.995 Ze=-169.785 Az status=0008 Ze status=0009 10:35:30 Check angles 10:35:30 SkyScan query 10:35:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:35:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:35:30 Message to Master queued w/err=0: serial=121005 error=0 10:35:35 Received message from Master: op=Filter serial=121006 10:35:35 Color wheel filter change from 0 to 0 10:35:35 FLIGetFilterPos err=0 currentPosition=0 10:35:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:35:35 Filter is already there-color wheel unchanged 10:35:35 Received message from Master: op=Shutter serial=121007 10:35:35 Shutter LASER open 10:35:36 Received message from Camera: op=State serial=121009 10:35:36 GetSingleValue result=40 Value=cccccccc 10:35:36 SkyScan query 10:35:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:35:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:36 Parameters OK 10:35:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:36 Set A/D data flow result=40 10:35:36 Set A/D channel type result=40 10:35:36 Set A/D encoding result=40 10:35:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:36 Set channel filter=0.000000e+000 result=40 10:35:36 Config A/D Result=40 10:35:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:36 Get A/D filter: -9.255963e+061 result=40 10:35:36 Get A/D value=-858993460 result=40 10:35:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:36 Parameters OK 10:35:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:36 Set A/D data flow result=40 10:35:36 Set A/D channel type result=40 10:35:36 Set A/D encoding result=40 10:35:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:36 Set channel filter=0.000000e+000 result=40 10:35:36 Config A/D Result=40 10:35:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:36 Get A/D filter: -9.255963e+061 result=40 10:35:36 Get A/D value=-858993460 result=40 10:35:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:35:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:35:36 Aux= 10:35:36 Message to Camera, serial 121009 queued 10:35:45 Received message from Master: op=Shutter serial=121019 10:35:45 Shutter LASER close 10:35:45 Received message from Master: op=PointingHead serial=121023 10:35:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:35:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:35:46 Point started: ret=0 10:35:46 point_skyscan result=0 10:35:46 Check angles 10:35:46 SkyScan query 10:35:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 10:35:47 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 10:35:47 Check angles 10:35:47 SkyScan query 10:35:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.205<-20147 Statuses=0008 0009 10:35:48 Msec=750 True Az=112.995 Ze=-122.205 Az status=0008 Ze status=0009 10:35:48 Check angles 10:35:48 SkyScan query 10:35:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.28<-18752 Statuses=0008 0009 10:35:48 Msec=1500 True Az=112.995 Ze=-101.28 Az status=0008 Ze status=0009 10:35:49 Check angles 10:35:49 SkyScan query 10:35:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.295<-17353 Statuses=0008 0009 10:35:49 Msec=2250 True Az=112.995 Ze=-80.295 Az status=0008 Ze status=0009 10:35:49 Check angles 10:35:49 SkyScan query 10:35:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.355<-15957 Statuses=0008 0009 10:35:50 Msec=3000 True Az=112.995 Ze=-59.355 Az status=0008 Ze status=0009 10:35:50 Check angles 10:35:50 SkyScan query 10:35:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.34<-14556 Statuses=0008 0009 10:35:51 Msec=3750 True Az=112.995 Ze=-38.34 Az status=0008 Ze status=0009 10:35:51 Check angles 10:35:51 SkyScan query 10:35:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.4<-13160 Statuses=0008 0009 10:35:51 Msec=4500 True Az=112.995 Ze=-17.4 Az status=0008 Ze status=0009 10:35:52 Check angles 10:35:52 SkyScan query 10:35:52 SkyScan query done: ret=0 az=112.995<-7533 ze=3.57<-11762 Statuses=0008 0009 10:35:52 Msec=5250 True Az=112.995 Ze=3.57 Az status=0008 Ze status=0009 10:35:52 Check angles 10:35:52 SkyScan query 10:35:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:35:53 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:35:53 Message to Master queued w/err=0: serial=121023 error=0 10:35:58 Received message from Master: op=Filter serial=121024 10:35:58 Color wheel filter change from 0 to 0 10:35:58 FLIGetFilterPos err=0 currentPosition=0 10:35:58 FLIGetStepsRemaining err=0 RemainingSteps=0 10:35:58 Filter is already there-color wheel unchanged 10:35:58 Received message from Master: op=Shutter serial=121025 10:35:58 Shutter LASER close 10:35:58 Received message from Camera: op=State serial=121027 10:35:58 GetSingleValue result=40 Value=cccccccc 10:35:58 SkyScan query 10:35:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:35:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:59 Parameters OK 10:35:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:59 Set A/D data flow result=40 10:35:59 Set A/D channel type result=40 10:35:59 Set A/D encoding result=40 10:35:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:59 Set channel filter=0.000000e+000 result=40 10:35:59 Config A/D Result=40 10:35:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:59 Get A/D filter: -9.255963e+061 result=40 10:35:59 Get A/D value=-858993460 result=40 10:35:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:59 Parameters OK 10:35:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:59 Set A/D data flow result=40 10:35:59 Set A/D channel type result=40 10:35:59 Set A/D encoding result=40 10:35:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:59 Set channel filter=0.000000e+000 result=40 10:35:59 Config A/D Result=40 10:35:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:59 Get A/D filter: -9.255963e+061 result=40 10:35:59 Get A/D value=-858993460 result=40 10:35:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:35:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:35:59 Aux= 10:35:59 Message to Camera, serial 121027 queued 10:36:36 Received message from Master: op=PointingHead serial=121040 10:36:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:36:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:36:36 Point started: ret=0 10:36:36 point_skyscan result=0 10:36:37 Check angles 10:36:37 SkyScan query 10:36:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:36:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:36:37 Message to Master queued w/err=0: serial=121040 error=0 10:36:42 Received message from Master: op=Filter serial=121041 10:36:42 Color wheel filter change from 0 to 0 10:36:42 FLIGetFilterPos err=0 currentPosition=0 10:36:42 FLIGetStepsRemaining err=0 RemainingSteps=0 10:36:42 Filter is already there-color wheel unchanged 10:36:43 Received message from Master: op=Shutter serial=121042 10:36:43 Shutter LASER close 10:36:43 Received message from Camera: op=State serial=121044 10:36:43 GetSingleValue result=40 Value=cccccccc 10:36:43 SkyScan query 10:36:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:36:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:43 Parameters OK 10:36:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:43 Set A/D data flow result=40 10:36:43 Set A/D channel type result=40 10:36:43 Set A/D encoding result=40 10:36:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:43 Set channel filter=0.000000e+000 result=40 10:36:43 Config A/D Result=40 10:36:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:43 Get A/D filter: -9.255963e+061 result=40 10:36:43 Get A/D value=-858993460 result=40 10:36:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:43 Parameters OK 10:36:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:43 Set A/D data flow result=40 10:36:43 Set A/D channel type result=40 10:36:43 Set A/D encoding result=40 10:36:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:43 Set channel filter=0.000000e+000 result=40 10:36:43 Config A/D Result=40 10:36:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:43 Get A/D filter: -9.255963e+061 result=40 10:36:43 Get A/D value=-858993460 result=40 10:36:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:36:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:36:43 Aux= 10:36:43 Message to Camera, serial 121044 queued 10:37:20 Received message from Master: op=PointingHead serial=121057 10:37:20 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:37:20 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:37:20 Point started: ret=0 10:37:20 point_skyscan result=0 10:37:21 Check angles 10:37:21 SkyScan query 10:37:22 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.51<-12434 Statuses=0009 0008 10:37:22 Msec=0 True Az=135.915 Ze=-6.51 Az status=0009 Ze status=0008 10:37:22 Check angles 10:37:22 SkyScan query 10:37:22 SkyScan query done: ret=0 az=153.72<-10248 ze=-6.495<-12433 Statuses=0009 0008 10:37:22 Msec=750 True Az=153.72 Ze=-6.495 Az status=0009 Ze status=0008 10:37:23 Check angles 10:37:23 SkyScan query 10:37:23 SkyScan query done: ret=0 az=171.195<-11413 ze=-6.495<-12433 Statuses=0009 0008 10:37:23 Msec=1500 True Az=171.195 Ze=-6.495 Az status=0009 Ze status=0008 10:37:23 Check angles 10:37:23 SkyScan query 10:37:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:37:24 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:37:24 Message to Master queued w/err=0: serial=121057 error=0 10:37:29 Received message from Master: op=Filter serial=121058 10:37:29 Color wheel filter change from 0 to 0 10:37:29 FLIGetFilterPos err=0 currentPosition=0 10:37:29 FLIGetStepsRemaining err=0 RemainingSteps=0 10:37:29 Filter is already there-color wheel unchanged 10:37:29 Received message from Master: op=Shutter serial=121059 10:37:29 Shutter LASER close 10:37:29 Received message from Camera: op=State serial=121061 10:37:29 GetSingleValue result=40 Value=cccccccc 10:37:29 SkyScan query 10:37:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:37:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:30 Parameters OK 10:37:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:30 Set A/D data flow result=40 10:37:30 Set A/D channel type result=40 10:37:30 Set A/D encoding result=40 10:37:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:30 Set channel filter=0.000000e+000 result=40 10:37:30 Config A/D Result=40 10:37:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:30 Get A/D filter: -9.255963e+061 result=40 10:37:30 Get A/D value=-858993460 result=40 10:37:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:30 Parameters OK 10:37:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:30 Set A/D data flow result=40 10:37:30 Set A/D channel type result=40 10:37:30 Set A/D encoding result=40 10:37:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:30 Set channel filter=0.000000e+000 result=40 10:37:30 Config A/D Result=40 10:37:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:30 Get A/D filter: -9.255963e+061 result=40 10:37:30 Get A/D value=-858993460 result=40 10:37:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:37:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:37:30 Aux= 10:37:30 Message to Camera, serial 121061 queued 10:38:07 Received message from Master: op=PointingHead serial=121074 10:38:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:38:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:38:07 Point started: ret=0 10:38:07 point_skyscan result=0 10:38:08 Check angles 10:38:08 SkyScan query 10:38:08 SkyScan query done: ret=0 az=152.835<-10189 ze=6.51<-11566 Statuses=0009 0008 10:38:08 Msec=0 True Az=152.835 Ze=6.51 Az status=0009 Ze status=0008 10:38:08 Check angles 10:38:08 SkyScan query 10:38:09 SkyScan query done: ret=0 az=135.345<-9023 ze=6.495<-11567 Statuses=0009 0008 10:38:09 Msec=750 True Az=135.345 Ze=6.495 Az status=0009 Ze status=0008 10:38:09 Check angles 10:38:09 SkyScan query 10:38:10 SkyScan query done: ret=0 az=118.02<-7868 ze=6.495<-11567 Statuses=0009 0008 10:38:10 Msec=1500 True Az=118.02 Ze=6.495 Az status=0009 Ze status=0008 10:38:10 Check angles 10:38:10 SkyScan query 10:38:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:38:10 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:38:10 Message to Master queued w/err=0: serial=121074 error=0 10:38:16 Received message from Master: op=Filter serial=121075 10:38:16 Color wheel filter change from 0 to 0 10:38:16 FLIGetFilterPos err=0 currentPosition=0 10:38:16 FLIGetStepsRemaining err=0 RemainingSteps=0 10:38:16 Filter is already there-color wheel unchanged 10:38:16 Received message from Master: op=Shutter serial=121076 10:38:16 Shutter LASER close 10:38:16 Received message from Camera: op=State serial=121078 10:38:16 GetSingleValue result=40 Value=cccccccc 10:38:16 SkyScan query 10:38:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:38:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:16 Parameters OK 10:38:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:16 Set A/D data flow result=40 10:38:16 Set A/D channel type result=40 10:38:16 Set A/D encoding result=40 10:38:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:16 Set channel filter=0.000000e+000 result=40 10:38:16 Config A/D Result=40 10:38:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:16 Get A/D filter: -9.255963e+061 result=40 10:38:16 Get A/D value=-858993460 result=40 10:38:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:16 Parameters OK 10:38:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:16 Set A/D data flow result=40 10:38:16 Set A/D channel type result=40 10:38:16 Set A/D encoding result=40 10:38:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:16 Set channel filter=0.000000e+000 result=40 10:38:16 Config A/D Result=40 10:38:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:16 Get A/D filter: -9.255963e+061 result=40 10:38:16 Get A/D value=-858993460 result=40 10:38:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:38:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:38:16 Aux= 10:38:16 Message to Camera, serial 121078 queued 10:38:53 Received message from Master: op=PointingHead serial=121091 10:38:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:38:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:38:53 Point started: ret=0 10:38:53 point_skyscan result=0 10:38:54 Check angles 10:38:54 SkyScan query 10:38:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.58<-13572 Statuses=0008 0009 10:38:55 Msec=0 True Az=112.995 Ze=-23.58 Az status=0008 Ze status=0009 10:38:55 Check angles 10:38:55 SkyScan query 10:38:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.52<-14968 Statuses=0008 0009 10:38:56 Msec=750 True Az=112.995 Ze=-44.52 Az status=0008 Ze status=0009 10:38:56 Check angles 10:38:56 SkyScan query 10:38:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.46<-16364 Statuses=0008 0009 10:38:56 Msec=1500 True Az=112.995 Ze=-65.46 Az status=0008 Ze status=0009 10:38:56 Check angles 10:38:56 SkyScan query 10:38:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.415<-17761 Statuses=0008 0009 10:38:57 Msec=2250 True Az=112.995 Ze=-86.415 Az status=0008 Ze status=0009 10:38:57 Check angles 10:38:57 SkyScan query 10:38:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.385<-19159 Statuses=0008 0009 10:38:58 Msec=3000 True Az=112.995 Ze=-107.385 Az status=0008 Ze status=0009 10:38:58 Check angles 10:38:58 SkyScan query 10:38:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.34<-20556 Statuses=0008 0009 10:38:59 Msec=3750 True Az=112.995 Ze=-128.34 Az status=0008 Ze status=0009 10:38:59 Check angles 10:38:59 SkyScan query 10:38:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.34<-21956 Statuses=0008 0009 10:38:59 Msec=4500 True Az=112.995 Ze=-149.34 Az status=0008 Ze status=0009 10:38:59 Check angles 10:38:59 SkyScan query 10:39:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.265<-23351 Statuses=0008 0009 10:39:00 Msec=5250 True Az=112.995 Ze=-170.265 Az status=0008 Ze status=0009 10:39:00 Check angles 10:39:00 SkyScan query 10:39:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:39:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:39:01 Message to Master queued w/err=0: serial=121091 error=0 10:39:06 Received message from Master: op=Filter serial=121092 10:39:06 Color wheel filter change from 0 to 0 10:39:06 FLIGetFilterPos err=0 currentPosition=0 10:39:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:06 Filter is already there-color wheel unchanged 10:39:06 Received message from Master: op=Shutter serial=121093 10:39:06 Shutter LASER open 10:39:06 Received message from Camera: op=State serial=121095 10:39:06 GetSingleValue result=40 Value=cccccccc 10:39:06 SkyScan query 10:39:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:39:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:07 Parameters OK 10:39:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:07 Set A/D data flow result=40 10:39:07 Set A/D channel type result=40 10:39:07 Set A/D encoding result=40 10:39:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:07 Set channel filter=0.000000e+000 result=40 10:39:07 Config A/D Result=40 10:39:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:07 Get A/D filter: -9.255963e+061 result=40 10:39:07 Get A/D value=-858993460 result=40 10:39:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:07 Parameters OK 10:39:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:07 Set A/D data flow result=40 10:39:07 Set A/D channel type result=40 10:39:07 Set A/D encoding result=40 10:39:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:07 Set channel filter=0.000000e+000 result=40 10:39:07 Config A/D Result=40 10:39:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:07 Get A/D filter: -9.255963e+061 result=40 10:39:07 Get A/D value=-858993460 result=40 10:39:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:07 Aux= 10:39:07 Message to Camera, serial 121095 queued 10:39:15 Received message from Master: op=Shutter serial=121105 10:39:15 Shutter LASER close 10:39:16 Received message from Master: op=PointingHead serial=121109 10:39:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:39:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:39:16 Point started: ret=0 10:39:16 point_skyscan result=0 10:39:17 Check angles 10:39:17 SkyScan query 10:39:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 10:39:17 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 10:39:17 Check angles 10:39:17 SkyScan query 10:39:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 10:39:18 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 10:39:18 Check angles 10:39:18 SkyScan query 10:39:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.265<-18751 Statuses=0008 0009 10:39:19 Msec=1500 True Az=112.995 Ze=-101.265 Az status=0008 Ze status=0009 10:39:19 Check angles 10:39:19 SkyScan query 10:39:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.295<-17353 Statuses=0008 0009 10:39:20 Msec=2250 True Az=112.995 Ze=-80.295 Az status=0008 Ze status=0009 10:39:20 Check angles 10:39:20 SkyScan query 10:39:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.355<-15957 Statuses=0008 0009 10:39:20 Msec=3000 True Az=112.995 Ze=-59.355 Az status=0008 Ze status=0009 10:39:20 Check angles 10:39:20 SkyScan query 10:39:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.355<-14557 Statuses=0008 0009 10:39:21 Msec=3750 True Az=112.995 Ze=-38.355 Az status=0008 Ze status=0009 10:39:21 Check angles 10:39:21 SkyScan query 10:39:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.905<-13127 Statuses=0008 0009 10:39:22 Msec=4500 True Az=112.995 Ze=-16.905 Az status=0008 Ze status=0009 10:39:22 Check angles 10:39:22 SkyScan query 10:39:23 SkyScan query done: ret=0 az=112.995<-7533 ze=4.035<-11731 Statuses=0008 0009 10:39:23 Msec=5250 True Az=112.995 Ze=4.035 Az status=0008 Ze status=0009 10:39:23 Check angles 10:39:23 SkyScan query 10:39:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:39:23 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:39:23 Message to Master queued w/err=0: serial=121109 error=0 10:39:28 Received message from Master: op=Filter serial=121110 10:39:28 Color wheel filter change from 0 to 0 10:39:28 FLIGetFilterPos err=0 currentPosition=0 10:39:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:28 Filter is already there-color wheel unchanged 10:39:28 Received message from Master: op=Shutter serial=121111 10:39:28 Shutter LASER close 10:39:29 Received message from Camera: op=State serial=121113 10:39:29 GetSingleValue result=40 Value=cccccccc 10:39:29 SkyScan query 10:39:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:39:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:29 Parameters OK 10:39:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:29 Set A/D data flow result=40 10:39:29 Set A/D channel type result=40 10:39:29 Set A/D encoding result=40 10:39:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:29 Set channel filter=0.000000e+000 result=40 10:39:29 Config A/D Result=40 10:39:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:29 Get A/D filter: -9.255963e+061 result=40 10:39:29 Get A/D value=-858993460 result=40 10:39:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:29 Parameters OK 10:39:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:29 Set A/D data flow result=40 10:39:29 Set A/D channel type result=40 10:39:29 Set A/D encoding result=40 10:39:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:29 Set channel filter=0.000000e+000 result=40 10:39:29 Config A/D Result=40 10:39:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:29 Get A/D filter: -9.255963e+061 result=40 10:39:29 Get A/D value=-858993460 result=40 10:39:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:29 Aux= 10:39:29 Message to Camera, serial 121113 queued 10:40:06 Received message from Master: op=PointingHead serial=121126 10:40:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:40:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:40:06 Point started: ret=0 10:40:06 point_skyscan result=0 10:40:07 Check angles 10:40:07 SkyScan query 10:40:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:40:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:40:08 Message to Master queued w/err=0: serial=121126 error=0 10:40:13 Received message from Master: op=Filter serial=121127 10:40:13 Color wheel filter change from 0 to 0 10:40:13 FLIGetFilterPos err=0 currentPosition=0 10:40:13 FLIGetStepsRemaining err=0 RemainingSteps=0 10:40:13 Filter is already there-color wheel unchanged 10:40:13 Received message from Master: op=Shutter serial=121128 10:40:13 Shutter LASER close 10:40:13 Received message from Camera: op=State serial=121130 10:40:13 GetSingleValue result=40 Value=cccccccc 10:40:13 SkyScan query 10:40:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:40:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:14 Parameters OK 10:40:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:14 Set A/D data flow result=40 10:40:14 Set A/D channel type result=40 10:40:14 Set A/D encoding result=40 10:40:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:14 Set channel filter=0.000000e+000 result=40 10:40:14 Config A/D Result=40 10:40:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:14 Get A/D filter: -9.255963e+061 result=40 10:40:14 Get A/D value=-858993460 result=40 10:40:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:14 Parameters OK 10:40:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:14 Set A/D data flow result=40 10:40:14 Set A/D channel type result=40 10:40:14 Set A/D encoding result=40 10:40:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:14 Set channel filter=0.000000e+000 result=40 10:40:14 Config A/D Result=40 10:40:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:14 Get A/D filter: -9.255963e+061 result=40 10:40:14 Get A/D value=-858993460 result=40 10:40:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:40:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:40:14 Aux= 10:40:14 Message to Camera, serial 121130 queued 10:40:50 Received message from Master: op=PointingHead serial=121143 10:40:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:40:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:40:51 Point started: ret=0 10:40:51 point_skyscan result=0 10:40:51 Check angles 10:40:51 SkyScan query 10:40:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:40:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:40:52 Message to Master queued w/err=0: serial=121143 error=0 10:40:57 Received message from Master: op=Filter serial=121144 10:40:57 Color wheel filter change from 0 to 0 10:40:57 FLIGetFilterPos err=0 currentPosition=0 10:40:57 FLIGetStepsRemaining err=0 RemainingSteps=0 10:40:57 Filter is already there-color wheel unchanged 10:40:57 Received message from Master: op=Shutter serial=121145 10:40:57 Shutter LASER close 10:40:57 Received message from Camera: op=State serial=121147 10:40:57 GetSingleValue result=40 Value=cccccccc 10:40:57 SkyScan query 10:40:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:40:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:58 Parameters OK 10:40:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:58 Set A/D data flow result=40 10:40:58 Set A/D channel type result=40 10:40:58 Set A/D encoding result=40 10:40:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:58 Set channel filter=0.000000e+000 result=40 10:40:58 Config A/D Result=40 10:40:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:58 Get A/D filter: -9.255963e+061 result=40 10:40:58 Get A/D value=-858993460 result=40 10:40:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:58 Parameters OK 10:40:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:58 Set A/D data flow result=40 10:40:58 Set A/D channel type result=40 10:40:58 Set A/D encoding result=40 10:40:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:58 Set channel filter=0.000000e+000 result=40 10:40:58 Config A/D Result=40 10:40:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:58 Get A/D filter: -9.255963e+061 result=40 10:40:58 Get A/D value=-858993460 result=40 10:40:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:40:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:40:58 Aux= 10:40:58 Message to Camera, serial 121147 queued 10:41:35 Received message from Master: op=PointingHead serial=121160 10:41:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:41:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:41:35 Point started: ret=0 10:41:35 point_skyscan result=0 10:41:36 Check angles 10:41:36 SkyScan query 10:41:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:41:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:41:36 Message to Master queued w/err=0: serial=121160 error=0 10:41:41 Received message from Master: op=Filter serial=121161 10:41:41 Color wheel filter change from 0 to 0 10:41:41 FLIGetFilterPos err=0 currentPosition=0 10:41:41 FLIGetStepsRemaining err=0 RemainingSteps=0 10:41:41 Filter is already there-color wheel unchanged 10:41:42 Received message from Master: op=Shutter serial=121162 10:41:42 Shutter LASER close 10:41:42 Received message from Camera: op=State serial=121164 10:41:42 GetSingleValue result=40 Value=cccccccc 10:41:42 SkyScan query 10:41:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:41:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:42 Parameters OK 10:41:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:42 Set A/D data flow result=40 10:41:42 Set A/D channel type result=40 10:41:42 Set A/D encoding result=40 10:41:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:42 Set channel filter=0.000000e+000 result=40 10:41:42 Config A/D Result=40 10:41:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:42 Get A/D filter: -9.255963e+061 result=40 10:41:42 Get A/D value=-858993460 result=40 10:41:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:42 Parameters OK 10:41:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:42 Set A/D data flow result=40 10:41:42 Set A/D channel type result=40 10:41:42 Set A/D encoding result=40 10:41:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:42 Set channel filter=0.000000e+000 result=40 10:41:42 Config A/D Result=40 10:41:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:42 Get A/D filter: -9.255963e+061 result=40 10:41:42 Get A/D value=-858993460 result=40 10:41:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:41:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:41:42 Aux= 10:41:42 Message to Camera, serial 121164 queued 10:42:19 Received message from Master: op=PointingHead serial=121177 10:42:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:42:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:42:19 Point started: ret=0 10:42:19 point_skyscan result=0 10:42:20 Check angles 10:42:20 SkyScan query 10:42:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 10:42:21 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 10:42:21 Check angles 10:42:21 SkyScan query 10:42:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 10:42:21 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 10:42:22 Check angles 10:42:22 SkyScan query 10:42:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 10:42:22 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 10:42:22 Check angles 10:42:22 SkyScan query 10:42:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.28<-17752 Statuses=0008 0009 10:42:23 Msec=2250 True Az=112.995 Ze=-86.28 Az status=0008 Ze status=0009 10:42:23 Check angles 10:42:23 SkyScan query 10:42:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.205<-19147 Statuses=0008 0009 10:42:24 Msec=3000 True Az=112.995 Ze=-107.205 Az status=0008 Ze status=0009 10:42:24 Check angles 10:42:24 SkyScan query 10:42:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.19<-20546 Statuses=0008 0009 10:42:24 Msec=3750 True Az=112.995 Ze=-128.19 Az status=0008 Ze status=0009 10:42:25 Check angles 10:42:25 SkyScan query 10:42:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.16<-21944 Statuses=0008 0009 10:42:25 Msec=4500 True Az=112.995 Ze=-149.16 Az status=0008 Ze status=0009 10:42:25 Check angles 10:42:25 SkyScan query 10:42:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.115<-23341 Statuses=0008 0009 10:42:26 Msec=5250 True Az=112.995 Ze=-170.115 Az status=0008 Ze status=0009 10:42:26 Check angles 10:42:26 SkyScan query 10:42:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:42:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:42:27 Message to Master queued w/err=0: serial=121177 error=0 10:42:32 Received message from Master: op=Filter serial=121178 10:42:32 Color wheel filter change from 0 to 0 10:42:32 FLIGetFilterPos err=0 currentPosition=0 10:42:32 FLIGetStepsRemaining err=0 RemainingSteps=0 10:42:32 Filter is already there-color wheel unchanged 10:42:32 Received message from Master: op=Shutter serial=121179 10:42:32 Shutter LASER open 10:42:32 Received message from Camera: op=State serial=121181 10:42:32 GetSingleValue result=40 Value=cccccccc 10:42:32 SkyScan query 10:42:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:42:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:33 Parameters OK 10:42:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:33 Set A/D data flow result=40 10:42:33 Set A/D channel type result=40 10:42:33 Set A/D encoding result=40 10:42:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:33 Set channel filter=0.000000e+000 result=40 10:42:33 Config A/D Result=40 10:42:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:33 Get A/D filter: -9.255963e+061 result=40 10:42:33 Get A/D value=-858993460 result=40 10:42:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:33 Parameters OK 10:42:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:33 Set A/D data flow result=40 10:42:33 Set A/D channel type result=40 10:42:33 Set A/D encoding result=40 10:42:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:33 Set channel filter=0.000000e+000 result=40 10:42:33 Config A/D Result=40 10:42:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:33 Get A/D filter: -9.255963e+061 result=40 10:42:33 Get A/D value=-858993460 result=40 10:42:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:42:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:42:33 Aux= 10:42:33 Message to Camera, serial 121181 queued 10:42:41 Received message from Master: op=Shutter serial=121191 10:42:41 Shutter LASER close 10:42:42 Received message from Master: op=PointingHead serial=121195 10:42:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:42:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:42:42 Point started: ret=0 10:42:42 point_skyscan result=0 10:42:43 Check angles 10:42:43 SkyScan query 10:42:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 10:42:43 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 10:42:44 Check angles 10:42:44 SkyScan query 10:42:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 10:42:44 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 10:42:44 Check angles 10:42:44 SkyScan query 10:42:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.68<-18712 Statuses=0008 0009 10:42:45 Msec=1500 True Az=112.995 Ze=-100.68 Az status=0008 Ze status=0009 10:42:45 Check angles 10:42:45 SkyScan query 10:42:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.725<-17315 Statuses=0008 0009 10:42:46 Msec=2250 True Az=112.995 Ze=-79.725 Az status=0008 Ze status=0009 10:42:46 Check angles 10:42:46 SkyScan query 10:42:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.77<-15918 Statuses=0008 0009 10:42:46 Msec=3000 True Az=112.995 Ze=-58.77 Az status=0008 Ze status=0009 10:42:47 Check angles 10:42:47 SkyScan query 10:42:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.785<-14519 Statuses=0008 0009 10:42:47 Msec=3750 True Az=112.995 Ze=-37.785 Az status=0008 Ze status=0009 10:42:47 Check angles 10:42:47 SkyScan query 10:42:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.83<-13122 Statuses=0008 0009 10:42:48 Msec=4500 True Az=112.995 Ze=-16.83 Az status=0008 Ze status=0009 10:42:48 Check angles 10:42:48 SkyScan query 10:42:49 SkyScan query done: ret=0 az=112.995<-7533 ze=4.41<-11706 Statuses=0008 0009 10:42:49 Msec=5250 True Az=112.995 Ze=4.41 Az status=0008 Ze status=0009 10:42:49 Check angles 10:42:49 SkyScan query 10:42:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:42:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:42:49 Message to Master queued w/err=0: serial=121195 error=0 10:42:54 Received message from Master: op=Filter serial=121196 10:42:54 Color wheel filter change from 0 to 0 10:42:54 FLIGetFilterPos err=0 currentPosition=0 10:42:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:42:54 Filter is already there-color wheel unchanged 10:42:55 Received message from Master: op=Shutter serial=121197 10:42:55 Shutter LASER close 10:42:55 Received message from Camera: op=State serial=121199 10:42:55 GetSingleValue result=40 Value=cccccccc 10:42:55 SkyScan query 10:42:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:42:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:55 Parameters OK 10:42:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:55 Set A/D data flow result=40 10:42:55 Set A/D channel type result=40 10:42:55 Set A/D encoding result=40 10:42:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:55 Set channel filter=0.000000e+000 result=40 10:42:55 Config A/D Result=40 10:42:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:55 Get A/D filter: -9.255963e+061 result=40 10:42:55 Get A/D value=-858993460 result=40 10:42:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:55 Parameters OK 10:42:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:55 Set A/D data flow result=40 10:42:55 Set A/D channel type result=40 10:42:55 Set A/D encoding result=40 10:42:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:55 Set channel filter=0.000000e+000 result=40 10:42:55 Config A/D Result=40 10:42:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:55 Get A/D filter: -9.255963e+061 result=40 10:42:55 Get A/D value=-858993460 result=40 10:42:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:42:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:42:55 Aux= 10:42:55 Message to Camera, serial 121199 queued 10:43:32 Received message from Master: op=PointingHead serial=121212 10:43:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:43:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:43:33 Point started: ret=0 10:43:33 point_skyscan result=0 10:43:33 Check angles 10:43:33 SkyScan query 10:43:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:43:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:43:34 Message to Master queued w/err=0: serial=121212 error=0 10:43:39 Received message from Master: op=Filter serial=121213 10:43:39 Color wheel filter change from 0 to 0 10:43:39 FLIGetFilterPos err=0 currentPosition=0 10:43:39 FLIGetStepsRemaining err=0 RemainingSteps=0 10:43:39 Filter is already there-color wheel unchanged 10:43:39 Received message from Master: op=Shutter serial=121214 10:43:39 Shutter LASER close 10:43:39 Received message from Camera: op=State serial=121216 10:43:39 GetSingleValue result=40 Value=cccccccc 10:43:39 SkyScan query 10:43:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:43:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:40 Parameters OK 10:43:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:40 Set A/D data flow result=40 10:43:40 Set A/D channel type result=40 10:43:40 Set A/D encoding result=40 10:43:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:40 Set channel filter=0.000000e+000 result=40 10:43:40 Config A/D Result=40 10:43:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:40 Get A/D filter: -9.255963e+061 result=40 10:43:40 Get A/D value=-858993460 result=40 10:43:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:40 Parameters OK 10:43:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:40 Set A/D data flow result=40 10:43:40 Set A/D channel type result=40 10:43:40 Set A/D encoding result=40 10:43:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:40 Set channel filter=0.000000e+000 result=40 10:43:40 Config A/D Result=40 10:43:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:40 Get A/D filter: -9.255963e+061 result=40 10:43:40 Get A/D value=-858993460 result=40 10:43:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:43:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:43:40 Aux= 10:43:40 Message to Camera, serial 121216 queued [UTC 2019-3-5 10:43:50] 10:44:16 Received message from Master: op=PointingHead serial=121229 10:44:16 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:44:16 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:44:17 Point started: ret=0 10:44:17 point_skyscan result=0 10:44:18 Check angles 10:44:18 SkyScan query 10:44:18 SkyScan query done: ret=0 az=136.035<-9069 ze=-6.51<-12434 Statuses=0009 0008 10:44:18 Msec=0 True Az=136.035 Ze=-6.51 Az status=0009 Ze status=0008 10:44:18 Check angles 10:44:18 SkyScan query 10:44:19 SkyScan query done: ret=0 az=153.87<-10258 ze=-6.495<-12433 Statuses=0009 0008 10:44:19 Msec=750 True Az=153.87 Ze=-6.495 Az status=0009 Ze status=0008 10:44:19 Check angles 10:44:19 SkyScan query 10:44:20 SkyScan query done: ret=0 az=171.285<-11419 ze=-6.495<-12433 Statuses=0009 0008 10:44:20 Msec=1500 True Az=171.285 Ze=-6.495 Az status=0009 Ze status=0008 10:44:20 Check angles 10:44:20 SkyScan query 10:44:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:44:20 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:44:20 Message to Master queued w/err=0: serial=121229 error=0 10:44:25 Received message from Master: op=Filter serial=121230 10:44:25 Color wheel filter change from 0 to 0 10:44:25 FLIGetFilterPos err=0 currentPosition=0 10:44:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:44:25 Filter is already there-color wheel unchanged 10:44:26 Received message from Master: op=Shutter serial=121231 10:44:26 Shutter LASER close 10:44:26 Received message from Camera: op=State serial=121233 10:44:26 GetSingleValue result=40 Value=cccccccc 10:44:26 SkyScan query 10:44:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:44:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:26 Parameters OK 10:44:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:26 Set A/D data flow result=40 10:44:26 Set A/D channel type result=40 10:44:26 Set A/D encoding result=40 10:44:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:26 Set channel filter=0.000000e+000 result=40 10:44:26 Config A/D Result=40 10:44:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:26 Get A/D filter: -9.255963e+061 result=40 10:44:26 Get A/D value=-858993460 result=40 10:44:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:26 Parameters OK 10:44:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:26 Set A/D data flow result=40 10:44:26 Set A/D channel type result=40 10:44:26 Set A/D encoding result=40 10:44:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:26 Set channel filter=0.000000e+000 result=40 10:44:26 Config A/D Result=40 10:44:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:26 Get A/D filter: -9.255963e+061 result=40 10:44:26 Get A/D value=-858993460 result=40 10:44:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:44:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:44:26 Aux= 10:44:26 Message to Camera, serial 121233 queued 10:45:03 Received message from Master: op=PointingHead serial=121246 10:45:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:45:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:45:03 Point started: ret=0 10:45:03 point_skyscan result=0 10:45:04 Check angles 10:45:04 SkyScan query 10:45:05 SkyScan query done: ret=0 az=152.73<-10182 ze=6.51<-11566 Statuses=0009 0008 10:45:05 Msec=0 True Az=152.73 Ze=6.51 Az status=0009 Ze status=0008 10:45:05 Check angles 10:45:05 SkyScan query 10:45:06 SkyScan query done: ret=0 az=135.3<-9020 ze=6.495<-11567 Statuses=0009 0008 10:45:06 Msec=750 True Az=135.3 Ze=6.495 Az status=0009 Ze status=0008 10:45:06 Check angles 10:45:06 SkyScan query 10:45:06 SkyScan query done: ret=0 az=117.705<-7847 ze=6.495<-11567 Statuses=0009 0008 10:45:06 Msec=1500 True Az=117.705 Ze=6.495 Az status=0009 Ze status=0008 10:45:06 Check angles 10:45:06 SkyScan query 10:45:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:45:07 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:45:07 Message to Master queued w/err=0: serial=121246 error=0 10:45:12 Received message from Master: op=Filter serial=121247 10:45:12 Color wheel filter change from 0 to 0 10:45:12 FLIGetFilterPos err=0 currentPosition=0 10:45:12 FLIGetStepsRemaining err=0 RemainingSteps=0 10:45:12 Filter is already there-color wheel unchanged 10:45:12 Received message from Master: op=Shutter serial=121248 10:45:12 Shutter LASER close 10:45:12 Received message from Camera: op=State serial=121250 10:45:12 GetSingleValue result=40 Value=cccccccc 10:45:12 SkyScan query 10:45:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:45:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:13 Parameters OK 10:45:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:13 Set A/D data flow result=40 10:45:13 Set A/D channel type result=40 10:45:13 Set A/D encoding result=40 10:45:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:13 Set channel filter=0.000000e+000 result=40 10:45:13 Config A/D Result=40 10:45:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:13 Get A/D filter: -9.255963e+061 result=40 10:45:13 Get A/D value=-858993460 result=40 10:45:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:13 Parameters OK 10:45:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:13 Set A/D data flow result=40 10:45:13 Set A/D channel type result=40 10:45:13 Set A/D encoding result=40 10:45:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:13 Set channel filter=0.000000e+000 result=40 10:45:13 Config A/D Result=40 10:45:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:13 Get A/D filter: -9.255963e+061 result=40 10:45:13 Get A/D value=-858993460 result=40 10:45:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:45:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:45:13 Aux= 10:45:13 Message to Camera, serial 121250 queued 10:45:50 Received message from Master: op=PointingHead serial=121263 10:45:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:45:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:45:50 Point started: ret=0 10:45:50 point_skyscan result=0 10:45:51 Check angles 10:45:51 SkyScan query 10:45:51 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.355<-13557 Statuses=0008 0009 10:45:51 Msec=0 True Az=112.98 Ze=-23.355 Az status=0008 Ze status=0009 10:45:52 Check angles 10:45:52 SkyScan query 10:45:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.31<-14954 Statuses=0008 0009 10:45:52 Msec=750 True Az=112.995 Ze=-44.31 Az status=0008 Ze status=0009 10:45:52 Check angles 10:45:52 SkyScan query 10:45:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.235<-16349 Statuses=0008 0009 10:45:53 Msec=1500 True Az=112.995 Ze=-65.235 Az status=0008 Ze status=0009 10:45:53 Check angles 10:45:53 SkyScan query 10:45:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 10:45:54 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 10:45:54 Check angles 10:45:54 SkyScan query 10:45:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.075<-19205 Statuses=0008 0009 10:45:54 Msec=3000 True Az=112.995 Ze=-108.075 Az status=0008 Ze status=0009 10:45:55 Check angles 10:45:55 SkyScan query 10:45:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-129<-20600 Statuses=0008 0009 10:45:55 Msec=3750 True Az=112.995 Ze=-129 Az status=0008 Ze status=0009 10:45:55 Check angles 10:45:55 SkyScan query 10:45:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.36<-22024 Statuses=0008 0009 10:45:56 Msec=4500 True Az=112.995 Ze=-150.36 Az status=0008 Ze status=0009 10:45:56 Check angles 10:45:56 SkyScan query 10:45:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0008 0009 10:45:57 Msec=5250 True Az=112.995 Ze=-171.45 Az status=0008 Ze status=0009 10:45:57 Check angles 10:45:57 SkyScan query 10:45:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:45:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:45:57 Message to Master queued w/err=0: serial=121263 error=0 10:46:02 Received message from Master: op=Filter serial=121264 10:46:02 Color wheel filter change from 0 to 0 10:46:02 FLIGetFilterPos err=0 currentPosition=0 10:46:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:46:02 Filter is already there-color wheel unchanged 10:46:03 Received message from Master: op=Shutter serial=121265 10:46:03 Shutter LASER open 10:46:03 Received message from Camera: op=State serial=121267 10:46:03 GetSingleValue result=40 Value=cccccccc 10:46:03 SkyScan query 10:46:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:46:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:03 Parameters OK 10:46:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:03 Set A/D data flow result=40 10:46:03 Set A/D channel type result=40 10:46:03 Set A/D encoding result=40 10:46:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:03 Set channel filter=0.000000e+000 result=40 10:46:03 Config A/D Result=40 10:46:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:03 Get A/D filter: -9.255963e+061 result=40 10:46:03 Get A/D value=-858993460 result=40 10:46:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:03 Parameters OK 10:46:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:03 Set A/D data flow result=40 10:46:03 Set A/D channel type result=40 10:46:03 Set A/D encoding result=40 10:46:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:03 Set channel filter=0.000000e+000 result=40 10:46:03 Config A/D Result=40 10:46:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:03 Get A/D filter: -9.255963e+061 result=40 10:46:03 Get A/D value=-858993460 result=40 10:46:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:03 Aux= 10:46:03 Message to Camera, serial 121267 queued 10:46:12 Received message from Master: op=Shutter serial=121277 10:46:12 Shutter LASER close 10:46:12 Received message from Master: op=PointingHead serial=121281 10:46:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:46:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:46:13 Point started: ret=0 10:46:13 point_skyscan result=0 10:46:13 Check angles 10:46:13 SkyScan query 10:46:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.755<-21517 Statuses=0008 0009 10:46:14 Msec=0 True Az=112.995 Ze=-142.755 Az status=0008 Ze status=0009 10:46:14 Check angles 10:46:14 SkyScan query 10:46:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.305<-20087 Statuses=0008 0009 10:46:15 Msec=750 True Az=112.995 Ze=-121.305 Az status=0008 Ze status=0009 10:46:15 Check angles 10:46:15 SkyScan query 10:46:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.335<-18689 Statuses=0008 0009 10:46:15 Msec=1500 True Az=112.995 Ze=-100.335 Az status=0008 Ze status=0009 10:46:16 Check angles 10:46:16 SkyScan query 10:46:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.365<-17291 Statuses=0008 0009 10:46:16 Msec=2250 True Az=112.995 Ze=-79.365 Az status=0008 Ze status=0009 10:46:16 Check angles 10:46:16 SkyScan query 10:46:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.425<-15895 Statuses=0008 0009 10:46:17 Msec=3000 True Az=112.995 Ze=-58.425 Az status=0008 Ze status=0009 10:46:17 Check angles 10:46:17 SkyScan query 10:46:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.5<-14500 Statuses=0008 0009 10:46:18 Msec=3750 True Az=112.995 Ze=-37.5 Az status=0008 Ze status=0009 10:46:18 Check angles 10:46:18 SkyScan query 10:46:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.515<-13101 Statuses=0008 0009 10:46:18 Msec=4500 True Az=112.995 Ze=-16.515 Az status=0008 Ze status=0009 10:46:19 Check angles 10:46:19 SkyScan query 10:46:19 SkyScan query done: ret=0 az=113.01<-7534 ze=4.35<-11710 Statuses=0008 0009 10:46:19 Msec=5250 True Az=113.01 Ze=4.35 Az status=0008 Ze status=0009 10:46:19 Check angles 10:46:19 SkyScan query 10:46:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:46:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:46:20 Message to Master queued w/err=0: serial=121281 error=0 10:46:25 Received message from Master: op=Filter serial=121282 10:46:25 Color wheel filter change from 0 to 0 10:46:25 FLIGetFilterPos err=0 currentPosition=0 10:46:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:46:25 Filter is already there-color wheel unchanged 10:46:25 Received message from Master: op=Shutter serial=121283 10:46:25 Shutter LASER close 10:46:25 Received message from Camera: op=State serial=121285 10:46:25 GetSingleValue result=40 Value=cccccccc 10:46:25 SkyScan query 10:46:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:46:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:26 Parameters OK 10:46:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:26 Set A/D data flow result=40 10:46:26 Set A/D channel type result=40 10:46:26 Set A/D encoding result=40 10:46:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:26 Set channel filter=0.000000e+000 result=40 10:46:26 Config A/D Result=40 10:46:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:26 Get A/D filter: -9.255963e+061 result=40 10:46:26 Get A/D value=-858993460 result=40 10:46:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:26 Parameters OK 10:46:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:26 Set A/D data flow result=40 10:46:26 Set A/D channel type result=40 10:46:26 Set A/D encoding result=40 10:46:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:26 Set channel filter=0.000000e+000 result=40 10:46:26 Config A/D Result=40 10:46:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:26 Get A/D filter: -9.255963e+061 result=40 10:46:26 Get A/D value=-858993460 result=40 10:46:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:26 Aux= 10:46:26 Message to Camera, serial 121285 queued 10:47:03 Received message from Master: op=PointingHead serial=121298 10:47:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:47:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:47:03 Point started: ret=0 10:47:03 point_skyscan result=0 10:47:04 Check angles 10:47:04 SkyScan query 10:47:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:47:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:47:04 Message to Master queued w/err=0: serial=121298 error=0 10:47:09 Received message from Master: op=Filter serial=121299 10:47:09 Color wheel filter change from 0 to 0 10:47:09 FLIGetFilterPos err=0 currentPosition=0 10:47:09 FLIGetStepsRemaining err=0 RemainingSteps=0 10:47:09 Filter is already there-color wheel unchanged 10:47:10 Received message from Master: op=Shutter serial=121300 10:47:10 Shutter LASER close 10:47:10 Received message from Camera: op=State serial=121302 10:47:10 GetSingleValue result=40 Value=cccccccc 10:47:10 SkyScan query 10:47:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:47:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:10 Parameters OK 10:47:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:10 Set A/D data flow result=40 10:47:10 Set A/D channel type result=40 10:47:10 Set A/D encoding result=40 10:47:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:10 Set channel filter=0.000000e+000 result=40 10:47:10 Config A/D Result=40 10:47:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:10 Get A/D filter: -9.255963e+061 result=40 10:47:10 Get A/D value=-858993460 result=40 10:47:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:10 Parameters OK 10:47:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:10 Set A/D data flow result=40 10:47:10 Set A/D channel type result=40 10:47:10 Set A/D encoding result=40 10:47:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:10 Set channel filter=0.000000e+000 result=40 10:47:10 Config A/D Result=40 10:47:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:10 Get A/D filter: -9.255963e+061 result=40 10:47:10 Get A/D value=-858993460 result=40 10:47:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:47:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:47:10 Aux= 10:47:10 Message to Camera, serial 121302 queued 10:47:46 Received message from Master: op=PointingHead serial=121314 10:47:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:47:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:47:46 Point started: ret=0 10:47:46 point_skyscan result=0 10:47:47 Check angles 10:47:47 SkyScan query 10:47:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:47:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:47:48 Message to Master queued w/err=0: serial=121314 error=0 10:47:53 Received message from Master: op=Filter serial=121315 10:47:53 Color wheel filter change from 0 to 0 10:47:53 FLIGetFilterPos err=0 currentPosition=0 10:47:53 FLIGetStepsRemaining err=0 RemainingSteps=0 10:47:53 Filter is already there-color wheel unchanged 10:47:53 Received message from Master: op=Shutter serial=121316 10:47:53 Shutter LASER close 10:47:53 Received message from Camera: op=State serial=121318 10:47:53 GetSingleValue result=40 Value=cccccccc 10:47:53 SkyScan query 10:47:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:47:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:54 Parameters OK 10:47:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:54 Set A/D data flow result=40 10:47:54 Set A/D channel type result=40 10:47:54 Set A/D encoding result=40 10:47:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:54 Set channel filter=0.000000e+000 result=40 10:47:54 Config A/D Result=40 10:47:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:54 Get A/D filter: -9.255963e+061 result=40 10:47:54 Get A/D value=-858993460 result=40 10:47:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:54 Parameters OK 10:47:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:54 Set A/D data flow result=40 10:47:54 Set A/D channel type result=40 10:47:54 Set A/D encoding result=40 10:47:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:54 Set channel filter=0.000000e+000 result=40 10:47:54 Config A/D Result=40 10:47:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:54 Get A/D filter: -9.255963e+061 result=40 10:47:54 Get A/D value=-858993460 result=40 10:47:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:47:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:47:54 Aux= 10:47:54 Message to Camera, serial 121318 queued 10:48:30 Received message from Master: op=PointingHead serial=121331 10:48:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:48:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:48:31 Point started: ret=0 10:48:31 point_skyscan result=0 10:48:31 Check angles 10:48:31 SkyScan query 10:48:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:48:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:48:32 Message to Master queued w/err=0: serial=121331 error=0 10:48:37 Received message from Master: op=Filter serial=121332 10:48:37 Color wheel filter change from 0 to 0 10:48:37 FLIGetFilterPos err=0 currentPosition=0 10:48:37 FLIGetStepsRemaining err=0 RemainingSteps=0 10:48:37 Filter is already there-color wheel unchanged 10:48:37 Received message from Master: op=Shutter serial=121333 10:48:37 Shutter LASER close 10:48:37 Received message from Camera: op=State serial=121335 10:48:37 GetSingleValue result=40 Value=cccccccc 10:48:37 SkyScan query 10:48:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:48:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:38 Parameters OK 10:48:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:38 Set A/D data flow result=40 10:48:38 Set A/D channel type result=40 10:48:38 Set A/D encoding result=40 10:48:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:38 Set channel filter=0.000000e+000 result=40 10:48:38 Config A/D Result=40 10:48:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:38 Get A/D filter: -9.255963e+061 result=40 10:48:38 Get A/D value=-858993460 result=40 10:48:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:38 Parameters OK 10:48:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:38 Set A/D data flow result=40 10:48:38 Set A/D channel type result=40 10:48:38 Set A/D encoding result=40 10:48:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:38 Set channel filter=0.000000e+000 result=40 10:48:38 Config A/D Result=40 10:48:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:38 Get A/D filter: -9.255963e+061 result=40 10:48:38 Get A/D value=-858993460 result=40 10:48:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:48:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:48:38 Aux= 10:48:38 Message to Camera, serial 121335 queued 10:49:15 Received message from Master: op=PointingHead serial=121348 10:49:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:49:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:49:15 Point started: ret=0 10:49:15 point_skyscan result=0 10:49:16 Check angles 10:49:16 SkyScan query 10:49:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 10:49:16 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 10:49:16 Check angles 10:49:16 SkyScan query 10:49:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.025<-14935 Statuses=0008 0009 10:49:17 Msec=750 True Az=112.995 Ze=-44.025 Az status=0008 Ze status=0009 10:49:17 Check angles 10:49:17 SkyScan query 10:49:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 10:49:18 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 10:49:18 Check angles 10:49:18 SkyScan query 10:49:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.28<-17752 Statuses=0008 0009 10:49:19 Msec=2250 True Az=112.995 Ze=-86.28 Az status=0008 Ze status=0009 10:49:19 Check angles 10:49:19 SkyScan query 10:49:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.22<-19148 Statuses=0008 0009 10:49:19 Msec=3000 True Az=112.995 Ze=-107.22 Az status=0008 Ze status=0009 10:49:19 Check angles 10:49:19 SkyScan query 10:49:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.19<-20546 Statuses=0008 0009 10:49:20 Msec=3750 True Az=112.995 Ze=-128.19 Az status=0008 Ze status=0009 10:49:20 Check angles 10:49:20 SkyScan query 10:49:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.16<-21944 Statuses=0008 0009 10:49:21 Msec=4500 True Az=112.995 Ze=-149.16 Az status=0008 Ze status=0009 10:49:21 Check angles 10:49:21 SkyScan query 10:49:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.1<-23340 Statuses=0008 0009 10:49:22 Msec=5250 True Az=112.995 Ze=-170.1 Az status=0008 Ze status=0009 10:49:22 Check angles 10:49:22 SkyScan query 10:49:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:49:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:49:22 Message to Master queued w/err=0: serial=121348 error=0 10:49:27 Received message from Master: op=Filter serial=121349 10:49:27 Color wheel filter change from 0 to 0 10:49:27 FLIGetFilterPos err=0 currentPosition=0 10:49:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:49:27 Filter is already there-color wheel unchanged 10:49:27 Received message from Master: op=Shutter serial=121350 10:49:27 Shutter LASER open 10:49:28 Received message from Camera: op=State serial=121352 10:49:28 GetSingleValue result=40 Value=cccccccc 10:49:28 SkyScan query 10:49:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:49:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:28 Parameters OK 10:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:28 Set A/D data flow result=40 10:49:28 Set A/D channel type result=40 10:49:28 Set A/D encoding result=40 10:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:28 Set channel filter=0.000000e+000 result=40 10:49:28 Config A/D Result=40 10:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:28 Get A/D filter: -9.255963e+061 result=40 10:49:28 Get A/D value=-858993460 result=40 10:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:28 Parameters OK 10:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:28 Set A/D data flow result=40 10:49:28 Set A/D channel type result=40 10:49:28 Set A/D encoding result=40 10:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:28 Set channel filter=0.000000e+000 result=40 10:49:28 Config A/D Result=40 10:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:28 Get A/D filter: -9.255963e+061 result=40 10:49:28 Get A/D value=-858993460 result=40 10:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:49:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:49:28 Aux= 10:49:28 Message to Camera, serial 121352 queued 10:49:37 Received message from Master: op=Shutter serial=121362 10:49:37 Shutter LASER close 10:49:37 Received message from Master: op=PointingHead serial=121366 10:49:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:49:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:49:38 Point started: ret=0 10:49:38 point_skyscan result=0 10:49:38 Check angles 10:49:38 SkyScan query 10:49:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 10:49:39 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 10:49:39 Check angles 10:49:39 SkyScan query 10:49:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 10:49:40 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 10:49:40 Check angles 10:49:40 SkyScan query 10:49:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.16<-18744 Statuses=0008 0009 10:49:40 Msec=1500 True Az=112.995 Ze=-101.16 Az status=0008 Ze status=0009 10:49:41 Check angles 10:49:41 SkyScan query 10:49:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.175<-17345 Statuses=0008 0009 10:49:41 Msec=2250 True Az=112.995 Ze=-80.175 Az status=0008 Ze status=0009 10:49:41 Check angles 10:49:41 SkyScan query 10:49:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.235<-15949 Statuses=0008 0009 10:49:42 Msec=3000 True Az=112.995 Ze=-59.235 Az status=0008 Ze status=0009 10:49:42 Check angles 10:49:42 SkyScan query 10:49:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.22<-14548 Statuses=0008 0009 10:49:43 Msec=3750 True Az=112.995 Ze=-38.22 Az status=0008 Ze status=0009 10:49:43 Check angles 10:49:43 SkyScan query 10:49:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.295<-13153 Statuses=0008 0009 10:49:43 Msec=4500 True Az=112.995 Ze=-17.295 Az status=0008 Ze status=0009 10:49:44 Check angles 10:49:44 SkyScan query 10:49:44 SkyScan query done: ret=0 az=112.995<-7533 ze=3.705<-11753 Statuses=0008 0009 10:49:44 Msec=5250 True Az=112.995 Ze=3.705 Az status=0008 Ze status=0009 10:49:44 Check angles 10:49:44 SkyScan query 10:49:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:49:45 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:49:45 Message to Master queued w/err=0: serial=121366 error=0 10:49:50 Received message from Master: op=Filter serial=121367 10:49:50 Color wheel filter change from 0 to 0 10:49:50 FLIGetFilterPos err=0 currentPosition=0 10:49:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:49:50 Filter is already there-color wheel unchanged 10:49:50 Received message from Master: op=Shutter serial=121368 10:49:50 Shutter LASER close 10:49:50 Received message from Camera: op=State serial=121370 10:49:50 GetSingleValue result=40 Value=cccccccc 10:49:50 SkyScan query 10:49:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:49:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:51 Parameters OK 10:49:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:51 Set A/D data flow result=40 10:49:51 Set A/D channel type result=40 10:49:51 Set A/D encoding result=40 10:49:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:51 Set channel filter=0.000000e+000 result=40 10:49:51 Config A/D Result=40 10:49:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:51 Get A/D filter: -9.255963e+061 result=40 10:49:51 Get A/D value=-858993460 result=40 10:49:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:51 Parameters OK 10:49:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:51 Set A/D data flow result=40 10:49:51 Set A/D channel type result=40 10:49:51 Set A/D encoding result=40 10:49:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:51 Set channel filter=0.000000e+000 result=40 10:49:51 Config A/D Result=40 10:49:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:51 Get A/D filter: -9.255963e+061 result=40 10:49:51 Get A/D value=-858993460 result=40 10:49:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:49:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:49:51 Aux= 10:49:51 Message to Camera, serial 121370 queued 10:50:28 Received message from Master: op=PointingHead serial=121383 10:50:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:50:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:50:28 Point started: ret=0 10:50:28 point_skyscan result=0 10:50:29 Check angles 10:50:29 SkyScan query 10:50:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:50:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:50:29 Message to Master queued w/err=0: serial=121383 error=0 10:50:34 Received message from Master: op=Filter serial=121384 10:50:34 Color wheel filter change from 0 to 0 10:50:34 FLIGetFilterPos err=0 currentPosition=0 10:50:34 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:34 Filter is already there-color wheel unchanged 10:50:35 Received message from Master: op=Shutter serial=121385 10:50:35 Shutter LASER close 10:50:35 Received message from Camera: op=State serial=121387 10:50:35 GetSingleValue result=40 Value=cccccccc 10:50:35 SkyScan query 10:50:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:50:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:35 Parameters OK 10:50:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:35 Set A/D data flow result=40 10:50:35 Set A/D channel type result=40 10:50:35 Set A/D encoding result=40 10:50:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:35 Set channel filter=0.000000e+000 result=40 10:50:35 Config A/D Result=40 10:50:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:35 Get A/D filter: -9.255963e+061 result=40 10:50:35 Get A/D value=-858993460 result=40 10:50:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:35 Parameters OK 10:50:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:35 Set A/D data flow result=40 10:50:35 Set A/D channel type result=40 10:50:35 Set A/D encoding result=40 10:50:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:35 Set channel filter=0.000000e+000 result=40 10:50:35 Config A/D Result=40 10:50:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:35 Get A/D filter: -9.255963e+061 result=40 10:50:35 Get A/D value=-858993460 result=40 10:50:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:35 Aux= 10:50:35 Message to Camera, serial 121387 queued 10:51:12 Received message from Master: op=PointingHead serial=121400 10:51:12 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:51:12 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:51:12 Point started: ret=0 10:51:12 point_skyscan result=0 10:51:13 Check angles 10:51:13 SkyScan query 10:51:14 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 10:51:14 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 10:51:14 Check angles 10:51:14 SkyScan query 10:51:14 SkyScan query done: ret=0 az=153.555<-10237 ze=-6.495<-12433 Statuses=0009 0008 10:51:14 Msec=750 True Az=153.555 Ze=-6.495 Az status=0009 Ze status=0008 10:51:15 Check angles 10:51:15 SkyScan query 10:51:15 SkyScan query done: ret=0 az=171.375<-11425 ze=-6.495<-12433 Statuses=0009 0008 10:51:15 Msec=1500 True Az=171.375 Ze=-6.495 Az status=0009 Ze status=0008 10:51:15 Check angles 10:51:15 SkyScan query 10:51:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:51:16 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:51:16 Message to Master queued w/err=0: serial=121400 error=0 10:51:21 Received message from Master: op=Filter serial=121401 10:51:21 Color wheel filter change from 0 to 0 10:51:21 FLIGetFilterPos err=0 currentPosition=0 10:51:21 FLIGetStepsRemaining err=0 RemainingSteps=0 10:51:21 Filter is already there-color wheel unchanged 10:51:21 Received message from Master: op=Shutter serial=121402 10:51:21 Shutter LASER close 10:51:21 Received message from Camera: op=State serial=121404 10:51:21 GetSingleValue result=40 Value=cccccccc 10:51:21 SkyScan query 10:51:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:51:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:22 Parameters OK 10:51:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:22 Set A/D data flow result=40 10:51:22 Set A/D channel type result=40 10:51:22 Set A/D encoding result=40 10:51:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:22 Set channel filter=0.000000e+000 result=40 10:51:22 Config A/D Result=40 10:51:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:22 Get A/D filter: -9.255963e+061 result=40 10:51:22 Get A/D value=-858993460 result=40 10:51:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:22 Parameters OK 10:51:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:22 Set A/D data flow result=40 10:51:22 Set A/D channel type result=40 10:51:22 Set A/D encoding result=40 10:51:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:22 Set channel filter=0.000000e+000 result=40 10:51:22 Config A/D Result=40 10:51:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:22 Get A/D filter: -9.255963e+061 result=40 10:51:22 Get A/D value=-858993460 result=40 10:51:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:51:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:51:22 Aux= 10:51:22 Message to Camera, serial 121404 queued 10:51:59 Received message from Master: op=PointingHead serial=121417 10:51:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:51:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:51:59 Point started: ret=0 10:51:59 point_skyscan result=0 10:52:00 Check angles 10:52:00 SkyScan query 10:52:00 SkyScan query done: ret=0 az=153.135<-10209 ze=6.51<-11566 Statuses=0009 0008 10:52:00 Msec=0 True Az=153.135 Ze=6.51 Az status=0009 Ze status=0008 10:52:00 Check angles 10:52:00 SkyScan query 10:52:01 SkyScan query done: ret=0 az=135.63<-9042 ze=6.495<-11567 Statuses=0009 0008 10:52:01 Msec=750 True Az=135.63 Ze=6.495 Az status=0009 Ze status=0008 10:52:01 Check angles 10:52:01 SkyScan query 10:52:02 SkyScan query done: ret=0 az=117.84<-7856 ze=6.495<-11567 Statuses=0009 0008 10:52:02 Msec=1500 True Az=117.84 Ze=6.495 Az status=0009 Ze status=0008 10:52:02 Check angles 10:52:02 SkyScan query 10:52:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:52:02 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:52:02 Message to Master queued w/err=0: serial=121417 error=0 10:52:07 Received message from Master: op=Filter serial=121418 10:52:07 Color wheel filter change from 0 to 0 10:52:07 FLIGetFilterPos err=0 currentPosition=0 10:52:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:52:07 Filter is already there-color wheel unchanged 10:52:08 Received message from Master: op=Shutter serial=121419 10:52:08 Shutter LASER close 10:52:08 Received message from Camera: op=State serial=121421 10:52:08 GetSingleValue result=40 Value=cccccccc 10:52:08 SkyScan query 10:52:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:52:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:08 Parameters OK 10:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:08 Set A/D data flow result=40 10:52:08 Set A/D channel type result=40 10:52:08 Set A/D encoding result=40 10:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:08 Set channel filter=0.000000e+000 result=40 10:52:08 Config A/D Result=40 10:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:08 Get A/D filter: -9.255963e+061 result=40 10:52:08 Get A/D value=-858993460 result=40 10:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:08 Parameters OK 10:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:08 Set A/D data flow result=40 10:52:08 Set A/D channel type result=40 10:52:08 Set A/D encoding result=40 10:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:08 Set channel filter=0.000000e+000 result=40 10:52:08 Config A/D Result=40 10:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:08 Get A/D filter: -9.255963e+061 result=40 10:52:08 Get A/D value=-858993460 result=40 10:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:52:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:52:08 Aux= 10:52:08 Message to Camera, serial 121421 queued 10:52:45 Received message from Master: op=PointingHead serial=121434 10:52:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:52:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:52:46 Point started: ret=0 10:52:46 point_skyscan result=0 10:52:46 Check angles 10:52:46 SkyScan query 10:52:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 10:52:47 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 10:52:47 Check angles 10:52:47 SkyScan query 10:52:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 10:52:48 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 10:52:48 Check angles 10:52:48 SkyScan query 10:52:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 10:52:48 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 10:52:49 Check angles 10:52:49 SkyScan query 10:52:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.73<-17782 Statuses=0008 0009 10:52:49 Msec=2250 True Az=112.995 Ze=-86.73 Az status=0008 Ze status=0009 10:52:49 Check angles 10:52:49 SkyScan query 10:52:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.195<-19213 Statuses=0008 0009 10:52:50 Msec=3000 True Az=112.995 Ze=-108.195 Az status=0008 Ze status=0009 10:52:50 Check angles 10:52:50 SkyScan query 10:52:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.12<-20608 Statuses=0008 0009 10:52:51 Msec=3750 True Az=112.995 Ze=-129.12 Az status=0008 Ze status=0009 10:52:51 Check angles 10:52:51 SkyScan query 10:52:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.075<-22005 Statuses=0008 0009 10:52:51 Msec=4500 True Az=112.995 Ze=-150.075 Az status=0008 Ze status=0009 10:52:52 Check angles 10:52:52 SkyScan query 10:52:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.925<-23395 Statuses=0008 0009 10:52:52 Msec=5250 True Az=112.995 Ze=-170.925 Az status=0008 Ze status=0009 10:52:52 Check angles 10:52:52 SkyScan query 10:52:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:52:53 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:52:53 Message to Master queued w/err=0: serial=121434 error=0 10:52:58 Received message from Master: op=Filter serial=121435 10:52:58 Color wheel filter change from 0 to 0 10:52:58 FLIGetFilterPos err=0 currentPosition=0 10:52:58 FLIGetStepsRemaining err=0 RemainingSteps=0 10:52:58 Filter is already there-color wheel unchanged 10:52:58 Received message from Master: op=Shutter serial=121436 10:52:58 Shutter LASER open 10:52:58 Received message from Camera: op=State serial=121438 10:52:58 GetSingleValue result=40 Value=cccccccc 10:52:58 SkyScan query 10:52:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:52:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:59 Parameters OK 10:52:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:59 Set A/D data flow result=40 10:52:59 Set A/D channel type result=40 10:52:59 Set A/D encoding result=40 10:52:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:59 Set channel filter=0.000000e+000 result=40 10:52:59 Config A/D Result=40 10:52:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:59 Get A/D filter: -9.255963e+061 result=40 10:52:59 Get A/D value=-858993460 result=40 10:52:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:59 Parameters OK 10:52:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:59 Set A/D data flow result=40 10:52:59 Set A/D channel type result=40 10:52:59 Set A/D encoding result=40 10:52:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:59 Set channel filter=0.000000e+000 result=40 10:52:59 Config A/D Result=40 10:52:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:59 Get A/D filter: -9.255963e+061 result=40 10:52:59 Get A/D value=-858993460 result=40 10:52:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:52:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:52:59 Aux= 10:52:59 Message to Camera, serial 121438 queued 10:53:07 Received message from Master: op=Shutter serial=121448 10:53:07 Shutter LASER close 10:53:08 Received message from Master: op=PointingHead serial=121452 10:53:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:53:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:53:08 Point started: ret=0 10:53:08 point_skyscan result=0 10:53:09 Check angles 10:53:09 SkyScan query 10:53:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.995<-21533 Statuses=0008 0009 10:53:09 Msec=0 True Az=112.995 Ze=-142.995 Az status=0008 Ze status=0009 10:53:10 Check angles 10:53:10 SkyScan query 10:53:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 10:53:10 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 10:53:10 Check angles 10:53:10 SkyScan query 10:53:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.085<-18739 Statuses=0008 0009 10:53:11 Msec=1500 True Az=112.995 Ze=-101.085 Az status=0008 Ze status=0009 10:53:11 Check angles 10:53:11 SkyScan query 10:53:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.59<-17306 Statuses=0008 0009 10:53:12 Msec=2250 True Az=112.995 Ze=-79.59 Az status=0008 Ze status=0009 10:53:12 Check angles 10:53:12 SkyScan query 10:53:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.2<-15880 Statuses=0008 0009 10:53:12 Msec=3000 True Az=112.995 Ze=-58.2 Az status=0008 Ze status=0009 10:53:13 Check angles 10:53:13 SkyScan query 10:53:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.32<-14488 Statuses=0008 0009 10:53:13 Msec=3750 True Az=112.995 Ze=-37.32 Az status=0008 Ze status=0009 10:53:13 Check angles 10:53:13 SkyScan query 10:53:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.93<-13062 Statuses=0008 0009 10:53:14 Msec=4500 True Az=112.995 Ze=-15.93 Az status=0008 Ze status=0009 10:53:14 Check angles 10:53:14 SkyScan query 10:53:15 SkyScan query done: ret=0 az=112.98<-7532 ze=5.145<-11657 Statuses=0008 0009 10:53:15 Msec=5250 True Az=112.98 Ze=5.145 Az status=0008 Ze status=0009 10:53:15 Check angles 10:53:15 SkyScan query 10:53:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:53:15 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:53:15 Message to Master queued w/err=0: serial=121452 error=0 10:53:20 Received message from Master: op=Filter serial=121453 10:53:20 Color wheel filter change from 0 to 0 10:53:20 FLIGetFilterPos err=0 currentPosition=0 10:53:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:53:20 Filter is already there-color wheel unchanged 10:53:21 Received message from Master: op=Shutter serial=121454 10:53:21 Shutter LASER close 10:53:21 Received message from Camera: op=State serial=121456 10:53:21 GetSingleValue result=40 Value=cccccccc 10:53:21 SkyScan query 10:53:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:53:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:21 Parameters OK 10:53:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:21 Set A/D data flow result=40 10:53:21 Set A/D channel type result=40 10:53:21 Set A/D encoding result=40 10:53:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:21 Set channel filter=0.000000e+000 result=40 10:53:21 Config A/D Result=40 10:53:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:21 Get A/D filter: -9.255963e+061 result=40 10:53:21 Get A/D value=-858993460 result=40 10:53:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:21 Parameters OK 10:53:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:21 Set A/D data flow result=40 10:53:21 Set A/D channel type result=40 10:53:21 Set A/D encoding result=40 10:53:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:21 Set channel filter=0.000000e+000 result=40 10:53:21 Config A/D Result=40 10:53:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:21 Get A/D filter: -9.255963e+061 result=40 10:53:21 Get A/D value=-858993460 result=40 10:53:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:53:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:53:21 Aux= 10:53:21 Message to Camera, serial 121456 queued 10:53:58 Received message from Master: op=PointingHead serial=121469 10:53:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:53:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:53:59 Point started: ret=0 10:53:59 point_skyscan result=0 10:53:59 Check angles 10:53:59 SkyScan query 10:54:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:54:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:54:00 Message to Master queued w/err=0: serial=121469 error=0 10:54:05 Received message from Master: op=Filter serial=121470 10:54:05 Color wheel filter change from 0 to 0 10:54:05 FLIGetFilterPos err=0 currentPosition=0 10:54:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:54:05 Filter is already there-color wheel unchanged 10:54:05 Received message from Master: op=Shutter serial=121471 10:54:05 Shutter LASER close 10:54:05 Received message from Camera: op=State serial=121473 10:54:05 GetSingleValue result=40 Value=cccccccc 10:54:05 SkyScan query 10:54:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:54:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:06 Parameters OK 10:54:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:06 Set A/D data flow result=40 10:54:06 Set A/D channel type result=40 10:54:06 Set A/D encoding result=40 10:54:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:06 Set channel filter=0.000000e+000 result=40 10:54:06 Config A/D Result=40 10:54:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:06 Get A/D filter: -9.255963e+061 result=40 10:54:06 Get A/D value=-858993460 result=40 10:54:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:06 Parameters OK 10:54:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:06 Set A/D data flow result=40 10:54:06 Set A/D channel type result=40 [UTC 2019-3-5 10:54:06] 10:54:06 Set A/D encoding result=40 10:54:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:06 Set channel filter=0.000000e+000 result=40 10:54:06 Config A/D Result=40 10:54:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:06 Get A/D filter: -9.255963e+061 result=40 10:54:06 Get A/D value=-858993460 result=40 10:54:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:54:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:54:06 Aux= 10:54:06 Message to Camera, serial 121473 queued 10:54:42 Received message from Master: op=PointingHead serial=121486 10:54:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:54:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:54:43 Point started: ret=0 10:54:43 point_skyscan result=0 10:54:44 Check angles 10:54:44 SkyScan query 10:54:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:54:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:54:44 Message to Master queued w/err=0: serial=121486 error=0 10:54:49 Received message from Master: op=Filter serial=121487 10:54:49 Color wheel filter change from 0 to 0 10:54:49 FLIGetFilterPos err=0 currentPosition=0 10:54:49 FLIGetStepsRemaining err=0 RemainingSteps=0 10:54:49 Filter is already there-color wheel unchanged 10:54:49 Received message from Master: op=Shutter serial=121488 10:54:49 Shutter LASER close 10:54:49 Received message from Camera: op=State serial=121490 10:54:49 GetSingleValue result=40 Value=cccccccc 10:54:49 SkyScan query 10:54:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:54:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:50 Parameters OK 10:54:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:50 Set A/D data flow result=40 10:54:50 Set A/D channel type result=40 10:54:50 Set A/D encoding result=40 10:54:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:50 Set channel filter=0.000000e+000 result=40 10:54:50 Config A/D Result=40 10:54:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:50 Get A/D filter: -9.255963e+061 result=40 10:54:50 Get A/D value=-858993460 result=40 10:54:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:50 Parameters OK 10:54:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:50 Set A/D data flow result=40 10:54:50 Set A/D channel type result=40 10:54:50 Set A/D encoding result=40 10:54:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:50 Set channel filter=0.000000e+000 result=40 10:54:50 Config A/D Result=40 10:54:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:50 Get A/D filter: -9.255963e+061 result=40 10:54:50 Get A/D value=-858993460 result=40 10:54:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:54:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:54:50 Aux= 10:54:50 Message to Camera, serial 121490 queued 10:55:27 Received message from Master: op=PointingHead serial=121503 10:55:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:55:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:55:27 Point started: ret=0 10:55:27 point_skyscan result=0 10:55:28 Check angles 10:55:28 SkyScan query 10:55:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:55:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:55:28 Message to Master queued w/err=0: serial=121503 error=0 10:55:33 Received message from Master: op=Filter serial=121504 10:55:33 Color wheel filter change from 0 to 0 10:55:33 FLIGetFilterPos err=0 currentPosition=0 10:55:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:55:33 Filter is already there-color wheel unchanged 10:55:34 Received message from Master: op=Shutter serial=121505 10:55:34 Shutter LASER close 10:55:34 Received message from Camera: op=State serial=121507 10:55:34 GetSingleValue result=40 Value=cccccccc 10:55:34 SkyScan query 10:55:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:55:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:34 Parameters OK 10:55:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:34 Set A/D data flow result=40 10:55:34 Set A/D channel type result=40 10:55:34 Set A/D encoding result=40 10:55:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:34 Set channel filter=0.000000e+000 result=40 10:55:34 Config A/D Result=40 10:55:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:34 Get A/D filter: -9.255963e+061 result=40 10:55:34 Get A/D value=-858993460 result=40 10:55:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:34 Parameters OK 10:55:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:34 Set A/D data flow result=40 10:55:34 Set A/D channel type result=40 10:55:34 Set A/D encoding result=40 10:55:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:34 Set channel filter=0.000000e+000 result=40 10:55:34 Config A/D Result=40 10:55:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:34 Get A/D filter: -9.255963e+061 result=40 10:55:34 Get A/D value=-858993460 result=40 10:55:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:55:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:55:34 Aux= 10:55:34 Message to Camera, serial 121507 queued 10:56:11 Received message from Master: op=PointingHead serial=121520 10:56:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:56:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:56:11 Point started: ret=0 10:56:11 point_skyscan result=0 10:56:12 Check angles 10:56:12 SkyScan query 10:56:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.58<-13572 Statuses=0008 0009 10:56:13 Msec=0 True Az=112.995 Ze=-23.58 Az status=0008 Ze status=0009 10:56:13 Check angles 10:56:13 SkyScan query 10:56:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 10:56:13 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 10:56:14 Check angles 10:56:14 SkyScan query 10:56:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.475<-16365 Statuses=0008 0009 10:56:14 Msec=1500 True Az=112.995 Ze=-65.475 Az status=0008 Ze status=0009 10:56:14 Check angles 10:56:14 SkyScan query 10:56:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.43<-17762 Statuses=0008 0009 10:56:15 Msec=2250 True Az=112.995 Ze=-86.43 Az status=0008 Ze status=0009 10:56:15 Check angles 10:56:15 SkyScan query 10:56:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.385<-19159 Statuses=0008 0009 10:56:16 Msec=3000 True Az=112.995 Ze=-107.385 Az status=0008 Ze status=0009 10:56:16 Check angles 10:56:16 SkyScan query 10:56:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.355<-20557 Statuses=0008 0009 10:56:16 Msec=3750 True Az=112.995 Ze=-128.355 Az status=0008 Ze status=0009 10:56:17 Check angles 10:56:17 SkyScan query 10:56:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.34<-21956 Statuses=0008 0009 10:56:17 Msec=4500 True Az=112.995 Ze=-149.34 Az status=0008 Ze status=0009 10:56:17 Check angles 10:56:17 SkyScan query 10:56:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.28<-23352 Statuses=0008 0009 10:56:18 Msec=5250 True Az=112.995 Ze=-170.28 Az status=0008 Ze status=0009 10:56:18 Check angles 10:56:18 SkyScan query 10:56:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:56:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:56:19 Message to Master queued w/err=0: serial=121520 error=0 10:56:24 Received message from Master: op=Filter serial=121521 10:56:24 Color wheel filter change from 0 to 0 10:56:24 FLIGetFilterPos err=0 currentPosition=0 10:56:24 FLIGetStepsRemaining err=0 RemainingSteps=0 10:56:24 Filter is already there-color wheel unchanged 10:56:24 Received message from Master: op=Shutter serial=121522 10:56:24 Shutter LASER open 10:56:24 Received message from Camera: op=State serial=121524 10:56:24 GetSingleValue result=40 Value=cccccccc 10:56:24 SkyScan query 10:56:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:56:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:25 Parameters OK 10:56:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:25 Set A/D data flow result=40 10:56:25 Set A/D channel type result=40 10:56:25 Set A/D encoding result=40 10:56:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:25 Set channel filter=0.000000e+000 result=40 10:56:25 Config A/D Result=40 10:56:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:25 Get A/D filter: -9.255963e+061 result=40 10:56:25 Get A/D value=-858993460 result=40 10:56:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:25 Parameters OK 10:56:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:25 Set A/D data flow result=40 10:56:25 Set A/D channel type result=40 10:56:25 Set A/D encoding result=40 10:56:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:25 Set channel filter=0.000000e+000 result=40 10:56:25 Config A/D Result=40 10:56:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:25 Get A/D filter: -9.255963e+061 result=40 10:56:25 Get A/D value=-858993460 result=40 10:56:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:56:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:56:25 Aux= 10:56:25 Message to Camera, serial 121524 queued 10:56:33 Received message from Master: op=Shutter serial=121534 10:56:33 Shutter LASER close 10:56:34 Received message from Master: op=PointingHead serial=121538 10:56:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:56:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:56:34 Point started: ret=0 10:56:34 point_skyscan result=0 10:56:35 Check angles 10:56:35 SkyScan query 10:56:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 10:56:35 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 10:56:36 Check angles 10:56:36 SkyScan query 10:56:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.95<-20130 Statuses=0008 0009 10:56:36 Msec=750 True Az=112.995 Ze=-121.95 Az status=0008 Ze status=0009 10:56:36 Check angles 10:56:36 SkyScan query 10:56:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.04<-18736 Statuses=0008 0009 10:56:37 Msec=1500 True Az=112.995 Ze=-101.04 Az status=0008 Ze status=0009 10:56:37 Check angles 10:56:37 SkyScan query 10:56:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.07<-17338 Statuses=0008 0009 10:56:38 Msec=2250 True Az=112.995 Ze=-80.07 Az status=0008 Ze status=0009 10:56:38 Check angles 10:56:38 SkyScan query 10:56:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.13<-15942 Statuses=0008 0009 10:56:38 Msec=3000 True Az=112.995 Ze=-59.13 Az status=0008 Ze status=0009 10:56:39 Check angles 10:56:39 SkyScan query 10:56:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.68<-14512 Statuses=0008 0009 10:56:39 Msec=3750 True Az=112.995 Ze=-37.68 Az status=0008 Ze status=0009 10:56:39 Check angles 10:56:39 SkyScan query 10:56:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.71<-13114 Statuses=0008 0009 10:56:40 Msec=4500 True Az=112.995 Ze=-16.71 Az status=0008 Ze status=0009 10:56:40 Check angles 10:56:40 SkyScan query 10:56:41 SkyScan query done: ret=0 az=113.01<-7534 ze=4.185<-11721 Statuses=0008 0009 10:56:41 Msec=5250 True Az=113.01 Ze=4.185 Az status=0008 Ze status=0009 10:56:41 Check angles 10:56:41 SkyScan query 10:56:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:56:41 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:56:41 Message to Master queued w/err=0: serial=121538 error=0 10:56:46 Received message from Master: op=Filter serial=121539 10:56:46 Color wheel filter change from 0 to 0 10:56:46 FLIGetFilterPos err=0 currentPosition=0 10:56:46 FLIGetStepsRemaining err=0 RemainingSteps=0 10:56:46 Filter is already there-color wheel unchanged 10:56:47 Received message from Master: op=Shutter serial=121540 10:56:47 Shutter LASER close 10:56:47 Received message from Camera: op=State serial=121542 10:56:47 GetSingleValue result=40 Value=cccccccc 10:56:47 SkyScan query 10:56:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:56:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:47 Parameters OK 10:56:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:47 Set A/D data flow result=40 10:56:47 Set A/D channel type result=40 10:56:47 Set A/D encoding result=40 10:56:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:47 Set channel filter=0.000000e+000 result=40 10:56:47 Config A/D Result=40 10:56:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:47 Get A/D filter: -9.255963e+061 result=40 10:56:47 Get A/D value=-858993460 result=40 10:56:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:47 Parameters OK 10:56:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:47 Set A/D data flow result=40 10:56:47 Set A/D channel type result=40 10:56:47 Set A/D encoding result=40 10:56:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:47 Set channel filter=0.000000e+000 result=40 10:56:47 Config A/D Result=40 10:56:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:47 Get A/D filter: -9.255963e+061 result=40 10:56:47 Get A/D value=-858993460 result=40 10:56:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:56:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:56:47 Aux= 10:56:47 Message to Camera, serial 121542 queued 10:57:24 Received message from Master: op=PointingHead serial=121555 10:57:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:57:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:57:25 Point started: ret=0 10:57:25 point_skyscan result=0 10:57:25 Check angles 10:57:25 SkyScan query 10:57:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:57:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:57:26 Message to Master queued w/err=0: serial=121555 error=0 10:57:31 Received message from Master: op=Filter serial=121556 10:57:31 Color wheel filter change from 0 to 0 10:57:31 FLIGetFilterPos err=0 currentPosition=0 10:57:31 FLIGetStepsRemaining err=0 RemainingSteps=0 10:57:31 Filter is already there-color wheel unchanged 10:57:31 Received message from Master: op=Shutter serial=121557 10:57:31 Shutter LASER close 10:57:31 Received message from Camera: op=State serial=121559 10:57:31 GetSingleValue result=40 Value=cccccccc 10:57:31 SkyScan query 10:57:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:57:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:32 Parameters OK 10:57:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:32 Set A/D data flow result=40 10:57:32 Set A/D channel type result=40 10:57:32 Set A/D encoding result=40 10:57:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:32 Set channel filter=0.000000e+000 result=40 10:57:32 Config A/D Result=40 10:57:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:32 Get A/D filter: -9.255963e+061 result=40 10:57:32 Get A/D value=-858993460 result=40 10:57:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:32 Parameters OK 10:57:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:32 Set A/D data flow result=40 10:57:32 Set A/D channel type result=40 10:57:32 Set A/D encoding result=40 10:57:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:32 Set channel filter=0.000000e+000 result=40 10:57:32 Config A/D Result=40 10:57:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:32 Get A/D filter: -9.255963e+061 result=40 10:57:32 Get A/D value=-858993460 result=40 10:57:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:32 Aux= 10:57:32 Message to Camera, serial 121559 queued 10:58:08 Received message from Master: op=PointingHead serial=121572 10:58:08 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:58:08 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:58:09 Point started: ret=0 10:58:09 point_skyscan result=0 10:58:10 Check angles 10:58:10 SkyScan query 10:58:10 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 10:58:10 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 10:58:10 Check angles 10:58:10 SkyScan query 10:58:11 SkyScan query done: ret=0 az=153.51<-10234 ze=-6.495<-12433 Statuses=0009 0008 10:58:11 Msec=750 True Az=153.51 Ze=-6.495 Az status=0009 Ze status=0008 10:58:11 Check angles 10:58:11 SkyScan query 10:58:12 SkyScan query done: ret=0 az=171<-11400 ze=-6.495<-12433 Statuses=0009 0008 10:58:12 Msec=1500 True Az=171 Ze=-6.495 Az status=0009 Ze status=0008 10:58:12 Check angles 10:58:12 SkyScan query 10:58:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:58:12 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:58:12 Message to Master queued w/err=0: serial=121572 error=0 10:58:17 Received message from Master: op=Filter serial=121573 10:58:17 Color wheel filter change from 0 to 0 10:58:17 FLIGetFilterPos err=0 currentPosition=0 10:58:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:58:17 Filter is already there-color wheel unchanged 10:58:18 Received message from Master: op=Shutter serial=121574 10:58:18 Shutter LASER close 10:58:18 Received message from Camera: op=State serial=121576 10:58:18 GetSingleValue result=40 Value=cccccccc 10:58:18 SkyScan query 10:58:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:58:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:18 Parameters OK 10:58:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:18 Set A/D data flow result=40 10:58:18 Set A/D channel type result=40 10:58:18 Set A/D encoding result=40 10:58:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:18 Set channel filter=0.000000e+000 result=40 10:58:18 Config A/D Result=40 10:58:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:18 Get A/D filter: -9.255963e+061 result=40 10:58:18 Get A/D value=-858993460 result=40 10:58:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:18 Parameters OK 10:58:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:18 Set A/D data flow result=40 10:58:18 Set A/D channel type result=40 10:58:18 Set A/D encoding result=40 10:58:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:18 Set channel filter=0.000000e+000 result=40 10:58:18 Config A/D Result=40 10:58:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:18 Get A/D filter: -9.255963e+061 result=40 10:58:18 Get A/D value=-858993460 result=40 10:58:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:58:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:58:18 Aux= 10:58:18 Message to Camera, serial 121576 queued 10:58:55 Received message from Master: op=PointingHead serial=121589 10:58:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:58:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:58:55 Point started: ret=0 10:58:55 point_skyscan result=0 10:58:56 Check angles 10:58:56 SkyScan query 10:58:57 SkyScan query done: ret=0 az=152.61<-10174 ze=6.51<-11566 Statuses=0009 0008 10:58:57 Msec=0 True Az=152.61 Ze=6.51 Az status=0009 Ze status=0008 10:58:57 Check angles 10:58:57 SkyScan query 10:58:57 SkyScan query done: ret=0 az=134.775<-8985 ze=6.495<-11567 Statuses=0009 0008 10:58:57 Msec=750 True Az=134.775 Ze=6.495 Az status=0009 Ze status=0008 10:58:58 Check angles 10:58:58 SkyScan query 10:58:58 SkyScan query done: ret=0 az=117.21<-7814 ze=6.495<-11567 Statuses=0009 0008 10:58:58 Msec=1500 True Az=117.21 Ze=6.495 Az status=0009 Ze status=0008 10:58:58 Check angles 10:58:58 SkyScan query 10:58:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:58:59 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:58:59 Message to Master queued w/err=0: serial=121589 error=0 10:59:04 Received message from Master: op=Filter serial=121590 10:59:04 Color wheel filter change from 0 to 0 10:59:04 FLIGetFilterPos err=0 currentPosition=0 10:59:04 FLIGetStepsRemaining err=0 RemainingSteps=0 10:59:04 Filter is already there-color wheel unchanged 10:59:04 Received message from Master: op=Shutter serial=121591 10:59:04 Shutter LASER close 10:59:04 Received message from Camera: op=State serial=121593 10:59:04 GetSingleValue result=40 Value=cccccccc 10:59:04 SkyScan query 10:59:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:59:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:05 Parameters OK 10:59:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:05 Set A/D data flow result=40 10:59:05 Set A/D channel type result=40 10:59:05 Set A/D encoding result=40 10:59:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:05 Set channel filter=0.000000e+000 result=40 10:59:05 Config A/D Result=40 10:59:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:05 Get A/D filter: -9.255963e+061 result=40 10:59:05 Get A/D value=-858993460 result=40 10:59:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:05 Parameters OK 10:59:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:05 Set A/D data flow result=40 10:59:05 Set A/D channel type result=40 10:59:05 Set A/D encoding result=40 10:59:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:05 Set channel filter=0.000000e+000 result=40 10:59:05 Config A/D Result=40 10:59:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:05 Get A/D filter: -9.255963e+061 result=40 10:59:05 Get A/D value=-858993460 result=40 10:59:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:05 Aux= 10:59:05 Message to Camera, serial 121593 queued 10:59:42 Received message from Master: op=PointingHead serial=121606 10:59:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:59:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:59:42 Point started: ret=0 10:59:42 point_skyscan result=0 10:59:43 Check angles 10:59:43 SkyScan query 10:59:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 10:59:43 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 10:59:43 Check angles 10:59:43 SkyScan query 10:59:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.58<-14972 Statuses=0008 0009 10:59:44 Msec=750 True Az=112.995 Ze=-44.58 Az status=0008 Ze status=0009 10:59:44 Check angles 10:59:44 SkyScan query 10:59:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 10:59:45 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 10:59:45 Check angles 10:59:45 SkyScan query 10:59:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 10:59:46 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 10:59:46 Check angles 10:59:46 SkyScan query 10:59:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.445<-19163 Statuses=0008 0009 10:59:46 Msec=3000 True Az=112.995 Ze=-107.445 Az status=0008 Ze status=0009 10:59:46 Check angles 10:59:46 SkyScan query 10:59:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.385<-20559 Statuses=0008 0009 10:59:47 Msec=3750 True Az=112.995 Ze=-128.385 Az status=0008 Ze status=0009 10:59:47 Check angles 10:59:47 SkyScan query 10:59:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.4<-21960 Statuses=0008 0009 10:59:48 Msec=4500 True Az=112.995 Ze=-149.4 Az status=0008 Ze status=0009 10:59:48 Check angles 10:59:48 SkyScan query 10:59:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.34<-23356 Statuses=0008 0009 10:59:49 Msec=5250 True Az=112.995 Ze=-170.34 Az status=0008 Ze status=0009 10:59:49 Check angles 10:59:49 SkyScan query 10:59:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:59:49 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:59:49 Message to Master queued w/err=0: serial=121606 error=0 10:59:54 Received message from Master: op=Filter serial=121607 10:59:54 Color wheel filter change from 0 to 0 10:59:54 FLIGetFilterPos err=0 currentPosition=0 10:59:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:59:54 Filter is already there-color wheel unchanged 10:59:54 Received message from Master: op=Shutter serial=121608 10:59:54 Shutter LASER open 10:59:55 Received message from Camera: op=State serial=121610 10:59:55 GetSingleValue result=40 Value=cccccccc 10:59:55 SkyScan query 10:59:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:59:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:55 Parameters OK 10:59:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:55 Set A/D data flow result=40 10:59:55 Set A/D channel type result=40 10:59:55 Set A/D encoding result=40 10:59:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:55 Set channel filter=0.000000e+000 result=40 10:59:55 Config A/D Result=40 10:59:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:55 Get A/D filter: -9.255963e+061 result=40 10:59:55 Get A/D value=-858993460 result=40 10:59:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:55 Parameters OK 10:59:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:55 Set A/D data flow result=40 10:59:55 Set A/D channel type result=40 10:59:55 Set A/D encoding result=40 10:59:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:55 Set channel filter=0.000000e+000 result=40 10:59:55 Config A/D Result=40 10:59:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:55 Get A/D filter: -9.255963e+061 result=40 10:59:55 Get A/D value=-858993460 result=40 10:59:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:55 Aux= 10:59:55 Message to Camera, serial 121610 queued 11:00:04 Received message from Master: op=Shutter serial=121620 11:00:04 Shutter LASER close 11:00:04 Received message from Master: op=PointingHead serial=121624 11:00:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:00:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:00:04 Point started: ret=0 11:00:04 point_skyscan result=0 11:00:05 Check angles 11:00:05 SkyScan query 11:00:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 11:00:06 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 11:00:06 Check angles 11:00:06 SkyScan query 11:00:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.55<-20170 Statuses=0008 0009 11:00:06 Msec=750 True Az=112.995 Ze=-122.55 Az status=0008 Ze status=0009 11:00:07 Check angles 11:00:07 SkyScan query 11:00:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.175<-18745 Statuses=0008 0009 11:00:07 Msec=1500 True Az=112.995 Ze=-101.175 Az status=0008 Ze status=0009 11:00:07 Check angles 11:00:07 SkyScan query 11:00:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.71<-17314 Statuses=0008 0009 11:00:08 Msec=2250 True Az=112.995 Ze=-79.71 Az status=0008 Ze status=0009 11:00:08 Check angles 11:00:08 SkyScan query 11:00:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.755<-15917 Statuses=0008 0009 11:00:09 Msec=3000 True Az=112.995 Ze=-58.755 Az status=0008 Ze status=0009 11:00:09 Check angles 11:00:09 SkyScan query 11:00:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.395<-14493 Statuses=0008 0009 11:00:10 Msec=3750 True Az=112.995 Ze=-37.395 Az status=0008 Ze status=0009 11:00:10 Check angles 11:00:10 SkyScan query 11:00:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.02<-13068 Statuses=0008 0009 11:00:10 Msec=4500 True Az=112.995 Ze=-16.02 Az status=0008 Ze status=0009 11:00:10 Check angles 11:00:10 SkyScan query 11:00:11 SkyScan query done: ret=0 az=112.995<-7533 ze=4.74<-11684 Statuses=0008 0009 11:00:11 Msec=5250 True Az=112.995 Ze=4.74 Az status=0008 Ze status=0009 11:00:11 Check angles 11:00:11 SkyScan query 11:00:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:00:12 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:00:12 Message to Master queued w/err=0: serial=121624 error=0 11:00:17 Received message from Master: op=Filter serial=121625 11:00:17 Color wheel filter change from 0 to 0 11:00:17 FLIGetFilterPos err=0 currentPosition=0 11:00:17 FLIGetStepsRemaining err=0 RemainingSteps=0 11:00:17 Filter is already there-color wheel unchanged 11:00:17 Received message from Master: op=Shutter serial=121626 11:00:17 Shutter LASER close 11:00:17 Received message from Camera: op=State serial=121628 11:00:17 GetSingleValue result=40 Value=cccccccc 11:00:17 SkyScan query 11:00:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:00:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:18 Parameters OK 11:00:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:18 Set A/D data flow result=40 11:00:18 Set A/D channel type result=40 11:00:18 Set A/D encoding result=40 11:00:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:18 Set channel filter=0.000000e+000 result=40 11:00:18 Config A/D Result=40 11:00:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:18 Get A/D filter: -9.255963e+061 result=40 11:00:18 Get A/D value=-858993460 result=40 11:00:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:18 Parameters OK 11:00:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:18 Set A/D data flow result=40 11:00:18 Set A/D channel type result=40 11:00:18 Set A/D encoding result=40 11:00:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:18 Set channel filter=0.000000e+000 result=40 11:00:18 Config A/D Result=40 11:00:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:18 Get A/D filter: -9.255963e+061 result=40 11:00:18 Get A/D value=-858993460 result=40 11:00:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:00:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:00:18 Aux= 11:00:18 Message to Camera, serial 121628 queued 11:00:54 Received message from Master: op=PointingHead serial=121640 11:00:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:00:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:00:54 Point started: ret=0 11:00:54 point_skyscan result=0 11:00:55 Check angles 11:00:55 SkyScan query 11:00:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:00:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:00:55 Message to Master queued w/err=0: serial=121640 error=0 11:01:00 Received message from Master: op=Filter serial=121641 11:01:00 Color wheel filter change from 0 to 0 11:01:00 FLIGetFilterPos err=0 currentPosition=0 11:01:00 FLIGetStepsRemaining err=0 RemainingSteps=0 11:01:00 Filter is already there-color wheel unchanged 11:01:00 Received message from Master: op=Shutter serial=121642 11:01:00 Shutter LASER close 11:01:01 Received message from Camera: op=State serial=121644 11:01:01 GetSingleValue result=40 Value=cccccccc 11:01:01 SkyScan query 11:01:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:01:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:01 Parameters OK 11:01:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:01 Set A/D data flow result=40 11:01:01 Set A/D channel type result=40 11:01:01 Set A/D encoding result=40 11:01:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:01 Set channel filter=0.000000e+000 result=40 11:01:01 Config A/D Result=40 11:01:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:01 Get A/D filter: -9.255963e+061 result=40 11:01:01 Get A/D value=-858993460 result=40 11:01:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:01 Parameters OK 11:01:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:01 Set A/D data flow result=40 11:01:01 Set A/D channel type result=40 11:01:01 Set A/D encoding result=40 11:01:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:01 Set channel filter=0.000000e+000 result=40 11:01:01 Config A/D Result=40 11:01:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:01 Get A/D filter: -9.255963e+061 result=40 11:01:01 Get A/D value=-858993460 result=40 11:01:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:01:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:01:01 Aux= 11:01:01 Message to Camera, serial 121644 queued 11:01:38 Received message from Master: op=PointingHead serial=121657 11:01:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:01:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:01:38 Point started: ret=0 11:01:38 point_skyscan result=0 11:01:39 Check angles 11:01:39 SkyScan query 11:01:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:01:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:01:40 Message to Master queued w/err=0: serial=121657 error=0 11:01:45 Received message from Master: op=Filter serial=121658 11:01:45 Color wheel filter change from 0 to 0 11:01:45 FLIGetFilterPos err=0 currentPosition=0 11:01:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:01:45 Filter is already there-color wheel unchanged 11:01:45 Received message from Master: op=Shutter serial=121659 11:01:45 Shutter LASER close 11:01:45 Received message from Camera: op=State serial=121661 11:01:45 GetSingleValue result=40 Value=cccccccc 11:01:45 SkyScan query 11:01:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:01:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:45 Parameters OK 11:01:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:45 Set A/D data flow result=40 11:01:45 Set A/D channel type result=40 11:01:45 Set A/D encoding result=40 11:01:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:45 Set channel filter=0.000000e+000 result=40 11:01:45 Config A/D Result=40 11:01:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:45 Get A/D filter: -9.255963e+061 result=40 11:01:45 Get A/D value=-858993460 result=40 11:01:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:45 Parameters OK 11:01:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:45 Set A/D data flow result=40 11:01:45 Set A/D channel type result=40 11:01:45 Set A/D encoding result=40 11:01:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:45 Set channel filter=0.000000e+000 result=40 11:01:45 Config A/D Result=40 11:01:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:45 Get A/D filter: -9.255963e+061 result=40 11:01:45 Get A/D value=-858993460 result=40 11:01:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:01:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:01:45 Aux= 11:01:45 Message to Camera, serial 121661 queued 11:02:22 Received message from Master: op=PointingHead serial=121674 11:02:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:02:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:02:23 Point started: ret=0 11:02:23 point_skyscan result=0 11:02:23 Check angles 11:02:23 SkyScan query 11:02:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:02:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:02:24 Message to Master queued w/err=0: serial=121674 error=0 11:02:29 Received message from Master: op=Filter serial=121675 11:02:29 Color wheel filter change from 0 to 0 11:02:29 FLIGetFilterPos err=0 currentPosition=0 11:02:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:02:29 Filter is already there-color wheel unchanged 11:02:29 Received message from Master: op=Shutter serial=121676 11:02:29 Shutter LASER close 11:02:29 Received message from Camera: op=State serial=121678 11:02:29 GetSingleValue result=40 Value=cccccccc 11:02:29 SkyScan query 11:02:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:02:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:30 Parameters OK 11:02:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:30 Set A/D data flow result=40 11:02:30 Set A/D channel type result=40 11:02:30 Set A/D encoding result=40 11:02:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:30 Set channel filter=0.000000e+000 result=40 11:02:30 Config A/D Result=40 11:02:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:30 Get A/D filter: -9.255963e+061 result=40 11:02:30 Get A/D value=-858993460 result=40 11:02:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:30 Parameters OK 11:02:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:30 Set A/D data flow result=40 11:02:30 Set A/D channel type result=40 11:02:30 Set A/D encoding result=40 11:02:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:30 Set channel filter=0.000000e+000 result=40 11:02:30 Config A/D Result=40 11:02:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:30 Get A/D filter: -9.255963e+061 result=40 11:02:30 Get A/D value=-858993460 result=40 11:02:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:02:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:02:30 Aux= 11:02:30 Message to Camera, serial 121678 queued 11:03:07 Received message from Master: op=PointingHead serial=121691 11:03:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:03:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:03:07 Point started: ret=0 11:03:07 point_skyscan result=0 11:03:08 Check angles 11:03:08 SkyScan query 11:03:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 11:03:08 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 11:03:08 Check angles 11:03:08 SkyScan query 11:03:09 SkyScan query done: ret=0 az=112.98<-7532 ze=-44.265<-14951 Statuses=0008 0009 11:03:09 Msec=750 True Az=112.98 Ze=-44.265 Az status=0008 Ze status=0009 11:03:09 Check angles 11:03:09 SkyScan query 11:03:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.19<-16346 Statuses=0008 0009 11:03:10 Msec=1500 True Az=112.995 Ze=-65.19 Az status=0008 Ze status=0009 11:03:10 Check angles 11:03:10 SkyScan query 11:03:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.13<-17742 Statuses=0008 0009 11:03:11 Msec=2250 True Az=112.995 Ze=-86.13 Az status=0008 Ze status=0009 11:03:11 Check angles 11:03:11 SkyScan query 11:03:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.07<-19138 Statuses=0008 0009 11:03:11 Msec=3000 True Az=112.995 Ze=-107.07 Az status=0008 Ze status=0009 11:03:11 Check angles 11:03:11 SkyScan query 11:03:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.04<-20536 Statuses=0008 0009 11:03:12 Msec=3750 True Az=112.995 Ze=-128.04 Az status=0008 Ze status=0009 11:03:12 Check angles 11:03:12 SkyScan query 11:03:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.995<-21933 Statuses=0008 0009 11:03:13 Msec=4500 True Az=112.995 Ze=-148.995 Az status=0008 Ze status=0009 11:03:13 Check angles 11:03:13 SkyScan query 11:03:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.935<-23329 Statuses=0008 0009 11:03:14 Msec=5250 True Az=112.995 Ze=-169.935 Az status=0008 Ze status=0009 11:03:14 Check angles 11:03:14 SkyScan query 11:03:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:03:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:03:14 Message to Master queued w/err=0: serial=121691 error=0 11:03:19 Received message from Master: op=Filter serial=121692 11:03:19 Color wheel filter change from 0 to 0 11:03:19 FLIGetFilterPos err=0 currentPosition=0 11:03:19 FLIGetStepsRemaining err=0 RemainingSteps=0 11:03:19 Filter is already there-color wheel unchanged 11:03:19 Received message from Master: op=Shutter serial=121693 11:03:19 Shutter LASER open 11:03:20 Received message from Camera: op=State serial=121695 11:03:20 GetSingleValue result=40 Value=cccccccc 11:03:20 SkyScan query 11:03:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:03:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:20 Parameters OK 11:03:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:20 Set A/D data flow result=40 11:03:20 Set A/D channel type result=40 11:03:20 Set A/D encoding result=40 11:03:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:20 Set channel filter=0.000000e+000 result=40 11:03:20 Config A/D Result=40 11:03:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:20 Get A/D filter: -9.255963e+061 result=40 11:03:20 Get A/D value=-858993460 result=40 11:03:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:20 Parameters OK 11:03:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:20 Set A/D data flow result=40 11:03:20 Set A/D channel type result=40 11:03:20 Set A/D encoding result=40 11:03:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:20 Set channel filter=0.000000e+000 result=40 11:03:20 Config A/D Result=40 11:03:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:20 Get A/D filter: -9.255963e+061 result=40 11:03:20 Get A/D value=-858993460 result=40 11:03:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:03:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:03:20 Aux= 11:03:20 Message to Camera, serial 121695 queued 11:03:29 Received message from Master: op=Shutter serial=121705 11:03:29 Shutter LASER close 11:03:29 Received message from Master: op=PointingHead serial=121709 11:03:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:03:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:03:30 Point started: ret=0 11:03:30 point_skyscan result=0 11:03:30 Check angles 11:03:30 SkyScan query 11:03:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 11:03:31 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 11:03:31 Check angles 11:03:31 SkyScan query 11:03:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 11:03:32 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 11:03:32 Check angles 11:03:32 SkyScan query 11:03:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 11:03:32 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 11:03:33 Check angles 11:03:33 SkyScan query 11:03:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.175<-17345 Statuses=0008 0009 11:03:33 Msec=2250 True Az=112.995 Ze=-80.175 Az status=0008 Ze status=0009 11:03:33 Check angles 11:03:33 SkyScan query 11:03:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 11:03:34 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 11:03:34 Check angles 11:03:34 SkyScan query 11:03:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.19<-14546 Statuses=0008 0009 11:03:35 Msec=3750 True Az=112.995 Ze=-38.19 Az status=0008 Ze status=0009 11:03:35 Check angles 11:03:35 SkyScan query 11:03:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.25<-13150 Statuses=0008 0009 11:03:35 Msec=4500 True Az=112.995 Ze=-17.25 Az status=0008 Ze status=0009 11:03:36 Check angles 11:03:36 SkyScan query 11:03:36 SkyScan query done: ret=0 az=113.01<-7534 ze=4.125<-11725 Statuses=0008 0009 11:03:36 Msec=5250 True Az=113.01 Ze=4.125 Az status=0008 Ze status=0009 11:03:36 Check angles 11:03:36 SkyScan query 11:03:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:03:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:03:37 Message to Master queued w/err=0: serial=121709 error=0 11:03:38 Received message from Master: op=Identify serial=121710 11:03:42 Received message from Master: op=Filter serial=121713 11:03:42 Color wheel filter change from 0 to 0 11:03:42 FLIGetFilterPos err=0 currentPosition=0 11:03:42 FLIGetStepsRemaining err=0 RemainingSteps=0 11:03:42 Filter is already there-color wheel unchanged 11:03:42 Received message from Master: op=Shutter serial=121714 11:03:42 Shutter LASER close 11:03:42 Received message from Camera: op=State serial=121716 11:03:42 GetSingleValue result=40 Value=cccccccc 11:03:42 SkyScan query 11:03:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:03:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:43 Parameters OK 11:03:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:43 Set A/D data flow result=40 11:03:43 Set A/D channel type result=40 11:03:43 Set A/D encoding result=40 11:03:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:43 Set channel filter=0.000000e+000 result=40 11:03:43 Config A/D Result=40 11:03:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:43 Get A/D filter: -9.255963e+061 result=40 11:03:43 Get A/D value=-858993460 result=40 11:03:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:43 Parameters OK 11:03:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:43 Set A/D data flow result=40 11:03:43 Set A/D channel type result=40 11:03:43 Set A/D encoding result=40 11:03:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:43 Set channel filter=0.000000e+000 result=40 11:03:43 Config A/D Result=40 11:03:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:43 Get A/D filter: -9.255963e+061 result=40 11:03:43 Get A/D value=-858993460 result=40 11:03:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:03:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:03:43 Aux= 11:03:43 Message to Camera, serial 121716 queued [UTC 2019-3-5 11:03:50] 11:04:20 Received message from Master: op=PointingHead serial=121729 11:04:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:04:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:04:20 Point started: ret=0 11:04:20 point_skyscan result=0 11:04:21 Check angles 11:04:21 SkyScan query 11:04:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:04:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:04:21 Message to Master queued w/err=0: serial=121729 error=0 11:04:26 Received message from Master: op=Filter serial=121730 11:04:26 Color wheel filter change from 0 to 0 11:04:26 FLIGetFilterPos err=0 currentPosition=0 11:04:26 FLIGetStepsRemaining err=0 RemainingSteps=0 11:04:26 Filter is already there-color wheel unchanged 11:04:27 Received message from Master: op=Shutter serial=121731 11:04:27 Shutter LASER close 11:04:27 Received message from Camera: op=State serial=121733 11:04:27 GetSingleValue result=40 Value=cccccccc 11:04:27 SkyScan query 11:04:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:04:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:27 Parameters OK 11:04:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:27 Set A/D data flow result=40 11:04:27 Set A/D channel type result=40 11:04:27 Set A/D encoding result=40 11:04:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:27 Set channel filter=0.000000e+000 result=40 11:04:27 Config A/D Result=40 11:04:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:27 Get A/D filter: -9.255963e+061 result=40 11:04:27 Get A/D value=-858993460 result=40 11:04:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:27 Parameters OK 11:04:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:27 Set A/D data flow result=40 11:04:27 Set A/D channel type result=40 11:04:27 Set A/D encoding result=40 11:04:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:27 Set channel filter=0.000000e+000 result=40 11:04:27 Config A/D Result=40 11:04:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:27 Get A/D filter: -9.255963e+061 result=40 11:04:27 Get A/D value=-858993460 result=40 11:04:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:04:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:04:27 Aux= 11:04:27 Message to Camera, serial 121733 queued 11:05:04 Received message from Master: op=PointingHead serial=121746 11:05:04 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:05:04 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:05:04 Point started: ret=0 11:05:04 point_skyscan result=0 11:05:05 Check angles 11:05:05 SkyScan query 11:05:06 SkyScan query done: ret=0 az=135.78<-9052 ze=-6.51<-12434 Statuses=0009 0008 11:05:06 Msec=0 True Az=135.78 Ze=-6.51 Az status=0009 Ze status=0008 11:05:06 Check angles 11:05:06 SkyScan query 11:05:06 SkyScan query done: ret=0 az=153.255<-10217 ze=-6.495<-12433 Statuses=0009 0008 11:05:06 Msec=750 True Az=153.255 Ze=-6.495 Az status=0009 Ze status=0008 11:05:07 Check angles 11:05:07 SkyScan query 11:05:07 SkyScan query done: ret=0 az=170.805<-11387 ze=-6.495<-12433 Statuses=0009 0008 11:05:07 Msec=1500 True Az=170.805 Ze=-6.495 Az status=0009 Ze status=0008 11:05:07 Check angles 11:05:07 SkyScan query 11:05:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:05:08 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:05:08 Message to Master queued w/err=0: serial=121746 error=0 11:05:13 Received message from Master: op=Filter serial=121747 11:05:13 Color wheel filter change from 0 to 0 11:05:13 FLIGetFilterPos err=0 currentPosition=0 11:05:13 FLIGetStepsRemaining err=0 RemainingSteps=0 11:05:13 Filter is already there-color wheel unchanged 11:05:13 Received message from Master: op=Shutter serial=121748 11:05:13 Shutter LASER close 11:05:13 Received message from Camera: op=State serial=121750 11:05:13 GetSingleValue result=40 Value=cccccccc 11:05:13 SkyScan query 11:05:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:05:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:14 Parameters OK 11:05:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:14 Set A/D data flow result=40 11:05:14 Set A/D channel type result=40 11:05:14 Set A/D encoding result=40 11:05:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:14 Set channel filter=0.000000e+000 result=40 11:05:14 Config A/D Result=40 11:05:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:14 Get A/D filter: -9.255963e+061 result=40 11:05:14 Get A/D value=-858993460 result=40 11:05:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:14 Parameters OK 11:05:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:14 Set A/D data flow result=40 11:05:14 Set A/D channel type result=40 11:05:14 Set A/D encoding result=40 11:05:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:14 Set channel filter=0.000000e+000 result=40 11:05:14 Config A/D Result=40 11:05:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:14 Get A/D filter: -9.255963e+061 result=40 11:05:14 Get A/D value=-858993460 result=40 11:05:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:05:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:05:14 Aux= 11:05:14 Message to Camera, serial 121750 queued 11:05:51 Received message from Master: op=PointingHead serial=121763 11:05:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:05:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:05:51 Point started: ret=0 11:05:51 point_skyscan result=0 11:05:52 Check angles 11:05:52 SkyScan query 11:05:52 SkyScan query done: ret=0 az=153.075<-10205 ze=6.51<-11566 Statuses=0009 0008 11:05:52 Msec=0 True Az=153.075 Ze=6.51 Az status=0009 Ze status=0008 11:05:52 Check angles 11:05:52 SkyScan query 11:05:53 SkyScan query done: ret=0 az=135.57<-9038 ze=6.495<-11567 Statuses=0009 0008 11:05:53 Msec=750 True Az=135.57 Ze=6.495 Az status=0009 Ze status=0008 11:05:53 Check angles 11:05:53 SkyScan query 11:05:54 SkyScan query done: ret=0 az=118.095<-7873 ze=6.495<-11567 Statuses=0009 0008 11:05:54 Msec=1500 True Az=118.095 Ze=6.495 Az status=0009 Ze status=0008 11:05:54 Check angles 11:05:54 SkyScan query 11:05:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:05:54 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:05:54 Message to Master queued w/err=0: serial=121763 error=0 11:05:59 Received message from Master: op=Filter serial=121764 11:05:59 Color wheel filter change from 0 to 0 11:05:59 FLIGetFilterPos err=0 currentPosition=0 11:05:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:05:59 Filter is already there-color wheel unchanged 11:06:00 Received message from Master: op=Shutter serial=121765 11:06:00 Shutter LASER close 11:06:00 Received message from Camera: op=State serial=121767 11:06:00 GetSingleValue result=40 Value=cccccccc 11:06:00 SkyScan query 11:06:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:06:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:00 Parameters OK 11:06:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:00 Set A/D data flow result=40 11:06:00 Set A/D channel type result=40 11:06:00 Set A/D encoding result=40 11:06:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:00 Set channel filter=0.000000e+000 result=40 11:06:00 Config A/D Result=40 11:06:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:00 Get A/D filter: -9.255963e+061 result=40 11:06:00 Get A/D value=-858993460 result=40 11:06:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:00 Parameters OK 11:06:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:00 Set A/D data flow result=40 11:06:00 Set A/D channel type result=40 11:06:00 Set A/D encoding result=40 11:06:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:00 Set channel filter=0.000000e+000 result=40 11:06:00 Config A/D Result=40 11:06:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:00 Get A/D filter: -9.255963e+061 result=40 11:06:00 Get A/D value=-858993460 result=40 11:06:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:00 Aux= 11:06:00 Message to Camera, serial 121767 queued 11:06:36 Received message from Master: op=PointingHead serial=121779 11:06:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:06:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:06:37 Point started: ret=0 11:06:37 point_skyscan result=0 11:06:37 Check angles 11:06:37 SkyScan query 11:06:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.79<-13586 Statuses=0008 0009 11:06:38 Msec=0 True Az=112.995 Ze=-23.79 Az status=0008 Ze status=0009 11:06:38 Check angles 11:06:38 SkyScan query 11:06:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.73<-14982 Statuses=0008 0009 11:06:39 Msec=750 True Az=112.995 Ze=-44.73 Az status=0008 Ze status=0009 11:06:39 Check angles 11:06:39 SkyScan query 11:06:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.18<-16412 Statuses=0008 0009 11:06:39 Msec=1500 True Az=112.995 Ze=-66.18 Az status=0008 Ze status=0009 11:06:40 Check angles 11:06:40 SkyScan query 11:06:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.135<-17809 Statuses=0008 0009 11:06:40 Msec=2250 True Az=112.995 Ze=-87.135 Az status=0008 Ze status=0009 11:06:40 Check angles 11:06:40 SkyScan query 11:06:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.105<-19207 Statuses=0008 0009 11:06:41 Msec=3000 True Az=112.995 Ze=-108.105 Az status=0008 Ze status=0009 11:06:41 Check angles 11:06:41 SkyScan query 11:06:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.015<-20601 Statuses=0008 0009 11:06:42 Msec=3750 True Az=112.995 Ze=-129.015 Az status=0008 Ze status=0009 11:06:42 Check angles 11:06:42 SkyScan query 11:06:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.375<-22025 Statuses=0008 0009 11:06:42 Msec=4500 True Az=112.995 Ze=-150.375 Az status=0008 Ze status=0009 11:06:43 Check angles 11:06:43 SkyScan query 11:06:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.165<-23411 Statuses=0008 0009 11:06:43 Msec=5250 True Az=112.995 Ze=-171.165 Az status=0008 Ze status=0009 11:06:43 Check angles 11:06:43 SkyScan query 11:06:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:06:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:06:44 Message to Master queued w/err=0: serial=121779 error=0 11:06:49 Received message from Master: op=Filter serial=121780 11:06:49 Color wheel filter change from 0 to 0 11:06:49 FLIGetFilterPos err=0 currentPosition=0 11:06:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:49 Filter is already there-color wheel unchanged 11:06:49 Received message from Master: op=Shutter serial=121781 11:06:49 Shutter LASER open 11:06:49 Received message from Camera: op=State serial=121783 11:06:49 GetSingleValue result=40 Value=cccccccc 11:06:49 SkyScan query 11:06:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:06:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:50 Parameters OK 11:06:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:50 Set A/D data flow result=40 11:06:50 Set A/D channel type result=40 11:06:50 Set A/D encoding result=40 11:06:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:50 Set channel filter=0.000000e+000 result=40 11:06:50 Config A/D Result=40 11:06:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:50 Get A/D filter: -9.255963e+061 result=40 11:06:50 Get A/D value=-858993460 result=40 11:06:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:50 Parameters OK 11:06:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:50 Set A/D data flow result=40 11:06:50 Set A/D channel type result=40 11:06:50 Set A/D encoding result=40 11:06:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:50 Set channel filter=0.000000e+000 result=40 11:06:50 Config A/D Result=40 11:06:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:50 Get A/D filter: -9.255963e+061 result=40 11:06:50 Get A/D value=-858993460 result=40 11:06:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:50 Aux= 11:06:50 Message to Camera, serial 121783 queued 11:06:58 Received message from Master: op=Shutter serial=121793 11:06:58 Shutter LASER close 11:06:59 Received message from Master: op=PointingHead serial=121797 11:06:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:06:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:06:59 Point started: ret=0 11:06:59 point_skyscan result=0 11:07:00 Check angles 11:07:00 SkyScan query 11:07:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 11:07:00 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 11:07:01 Check angles 11:07:01 SkyScan query 11:07:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 11:07:01 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 11:07:01 Check angles 11:07:01 SkyScan query 11:07:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.16<-18744 Statuses=0008 0009 11:07:02 Msec=1500 True Az=112.995 Ze=-101.16 Az status=0008 Ze status=0009 11:07:02 Check angles 11:07:02 SkyScan query 11:07:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 11:07:03 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 11:07:03 Check angles 11:07:03 SkyScan query 11:07:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 11:07:03 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 11:07:04 Check angles 11:07:04 SkyScan query 11:07:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 11:07:04 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 11:07:04 Check angles 11:07:04 SkyScan query 11:07:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.265<-13151 Statuses=0008 0009 11:07:05 Msec=4500 True Az=112.995 Ze=-17.265 Az status=0008 Ze status=0009 11:07:05 Check angles 11:07:05 SkyScan query 11:07:06 SkyScan query done: ret=0 az=113.01<-7534 ze=4.125<-11725 Statuses=0008 0009 11:07:06 Msec=5250 True Az=113.01 Ze=4.125 Az status=0008 Ze status=0009 11:07:06 Check angles 11:07:06 SkyScan query 11:07:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:07:06 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:07:06 Message to Master queued w/err=0: serial=121797 error=0 11:07:11 Received message from Master: op=Filter serial=121798 11:07:11 Color wheel filter change from 0 to 0 11:07:11 FLIGetFilterPos err=0 currentPosition=0 11:07:11 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:11 Filter is already there-color wheel unchanged 11:07:12 Received message from Master: op=Shutter serial=121799 11:07:12 Shutter LASER close 11:07:12 Received message from Camera: op=State serial=121801 11:07:12 GetSingleValue result=40 Value=cccccccc 11:07:12 SkyScan query 11:07:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:07:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:12 Parameters OK 11:07:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:12 Set A/D data flow result=40 11:07:12 Set A/D channel type result=40 11:07:12 Set A/D encoding result=40 11:07:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:12 Set channel filter=0.000000e+000 result=40 11:07:12 Config A/D Result=40 11:07:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:12 Get A/D filter: -9.255963e+061 result=40 11:07:12 Get A/D value=-858993460 result=40 11:07:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:12 Parameters OK 11:07:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:12 Set A/D data flow result=40 11:07:12 Set A/D channel type result=40 11:07:12 Set A/D encoding result=40 11:07:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:12 Set channel filter=0.000000e+000 result=40 11:07:12 Config A/D Result=40 11:07:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:12 Get A/D filter: -9.255963e+061 result=40 11:07:12 Get A/D value=-858993460 result=40 11:07:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:07:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:07:12 Aux= 11:07:12 Message to Camera, serial 121801 queued 11:07:49 Received message from Master: op=PointingHead serial=121814 11:07:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:07:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:07:49 Point started: ret=0 11:07:49 point_skyscan result=0 11:07:50 Check angles 11:07:50 SkyScan query 11:07:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:07:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:07:51 Message to Master queued w/err=0: serial=121814 error=0 11:07:56 Received message from Master: op=Filter serial=121815 11:07:56 Color wheel filter change from 0 to 0 11:07:56 FLIGetFilterPos err=0 currentPosition=0 11:07:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:56 Filter is already there-color wheel unchanged 11:07:56 Received message from Master: op=Shutter serial=121816 11:07:56 Shutter LASER close 11:07:56 Received message from Camera: op=State serial=121818 11:07:56 GetSingleValue result=40 Value=cccccccc 11:07:56 SkyScan query 11:07:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:07:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:57 Parameters OK 11:07:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:57 Set A/D data flow result=40 11:07:57 Set A/D channel type result=40 11:07:57 Set A/D encoding result=40 11:07:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:57 Set channel filter=0.000000e+000 result=40 11:07:57 Config A/D Result=40 11:07:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:57 Get A/D filter: -9.255963e+061 result=40 11:07:57 Get A/D value=-858993460 result=40 11:07:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:57 Parameters OK 11:07:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:57 Set A/D data flow result=40 11:07:57 Set A/D channel type result=40 11:07:57 Set A/D encoding result=40 11:07:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:57 Set channel filter=0.000000e+000 result=40 11:07:57 Config A/D Result=40 11:07:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:57 Get A/D filter: -9.255963e+061 result=40 11:07:57 Get A/D value=-858993460 result=40 11:07:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:07:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:07:57 Aux= 11:07:57 Message to Camera, serial 121818 queued 11:08:33 Received message from Master: op=PointingHead serial=121831 11:08:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:08:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:08:34 Point started: ret=0 11:08:34 point_skyscan result=0 11:08:35 Check angles 11:08:35 SkyScan query 11:08:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:08:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:08:35 Message to Master queued w/err=0: serial=121831 error=0 11:08:40 Received message from Master: op=Filter serial=121832 11:08:40 Color wheel filter change from 0 to 0 11:08:40 FLIGetFilterPos err=0 currentPosition=0 11:08:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:08:40 Filter is already there-color wheel unchanged 11:08:40 Received message from Master: op=Shutter serial=121833 11:08:40 Shutter LASER close 11:08:40 Received message from Camera: op=State serial=121835 11:08:40 GetSingleValue result=40 Value=cccccccc 11:08:40 SkyScan query 11:08:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:08:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:41 Parameters OK 11:08:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:41 Set A/D data flow result=40 11:08:41 Set A/D channel type result=40 11:08:41 Set A/D encoding result=40 11:08:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:41 Set channel filter=0.000000e+000 result=40 11:08:41 Config A/D Result=40 11:08:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:41 Get A/D filter: -9.255963e+061 result=40 11:08:41 Get A/D value=-858993460 result=40 11:08:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:41 Parameters OK 11:08:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:41 Set A/D data flow result=40 11:08:41 Set A/D channel type result=40 11:08:41 Set A/D encoding result=40 11:08:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:41 Set channel filter=0.000000e+000 result=40 11:08:41 Config A/D Result=40 11:08:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:41 Get A/D filter: -9.255963e+061 result=40 11:08:41 Get A/D value=-858993460 result=40 11:08:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:08:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:08:41 Aux= 11:08:41 Message to Camera, serial 121835 queued 11:09:18 Received message from Master: op=PointingHead serial=121848 11:09:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:09:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:09:18 Point started: ret=0 11:09:18 point_skyscan result=0 11:09:19 Check angles 11:09:19 SkyScan query 11:09:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:09:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:09:19 Message to Master queued w/err=0: serial=121848 error=0 11:09:24 Received message from Master: op=Filter serial=121849 11:09:24 Color wheel filter change from 0 to 0 11:09:24 FLIGetFilterPos err=0 currentPosition=0 11:09:24 FLIGetStepsRemaining err=0 RemainingSteps=0 11:09:24 Filter is already there-color wheel unchanged 11:09:25 Received message from Master: op=Shutter serial=121850 11:09:25 Shutter LASER close 11:09:25 Received message from Camera: op=State serial=121852 11:09:25 GetSingleValue result=40 Value=cccccccc 11:09:25 SkyScan query 11:09:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:09:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:25 Parameters OK 11:09:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:25 Set A/D data flow result=40 11:09:25 Set A/D channel type result=40 11:09:25 Set A/D encoding result=40 11:09:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:25 Set channel filter=0.000000e+000 result=40 11:09:25 Config A/D Result=40 11:09:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:25 Get A/D filter: -9.255963e+061 result=40 11:09:25 Get A/D value=-858993460 result=40 11:09:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:25 Parameters OK 11:09:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:25 Set A/D data flow result=40 11:09:25 Set A/D channel type result=40 11:09:25 Set A/D encoding result=40 11:09:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:25 Set channel filter=0.000000e+000 result=40 11:09:25 Config A/D Result=40 11:09:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:25 Get A/D filter: -9.255963e+061 result=40 11:09:25 Get A/D value=-858993460 result=40 11:09:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:09:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:09:25 Aux= 11:09:25 Message to Camera, serial 121852 queued 11:10:02 Received message from Master: op=PointingHead serial=121865 11:10:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:10:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:10:02 Point started: ret=0 11:10:02 point_skyscan result=0 11:10:03 Check angles 11:10:03 SkyScan query 11:10:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 11:10:04 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 11:10:04 Check angles 11:10:04 SkyScan query 11:10:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 11:10:04 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 11:10:05 Check angles 11:10:05 SkyScan query 11:10:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.01<-16334 Statuses=0008 0009 11:10:05 Msec=1500 True Az=112.995 Ze=-65.01 Az status=0008 Ze status=0009 11:10:05 Check angles 11:10:05 SkyScan query 11:10:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.935<-17729 Statuses=0008 0009 11:10:06 Msec=2250 True Az=112.995 Ze=-85.935 Az status=0008 Ze status=0009 11:10:06 Check angles 11:10:06 SkyScan query 11:10:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.86<-19124 Statuses=0008 0009 11:10:07 Msec=3000 True Az=112.995 Ze=-106.86 Az status=0008 Ze status=0009 11:10:07 Check angles 11:10:07 SkyScan query 11:10:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.815<-20521 Statuses=0008 0009 11:10:07 Msec=3750 True Az=112.995 Ze=-127.815 Az status=0008 Ze status=0009 11:10:08 Check angles 11:10:08 SkyScan query 11:10:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.755<-21917 Statuses=0008 0009 11:10:08 Msec=4500 True Az=112.995 Ze=-148.755 Az status=0008 Ze status=0009 11:10:08 Check angles 11:10:08 SkyScan query 11:10:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.695<-23313 Statuses=0008 0009 11:10:09 Msec=5250 True Az=112.995 Ze=-169.695 Az status=0008 Ze status=0009 11:10:09 Check angles 11:10:09 SkyScan query 11:10:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:10:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:10:10 Message to Master queued w/err=0: serial=121865 error=0 11:10:15 Received message from Master: op=Filter serial=121866 11:10:15 Color wheel filter change from 0 to 0 11:10:15 FLIGetFilterPos err=0 currentPosition=0 11:10:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:10:15 Filter is already there-color wheel unchanged 11:10:15 Received message from Master: op=Shutter serial=121867 11:10:15 Shutter LASER open 11:10:15 Received message from Camera: op=State serial=121869 11:10:15 GetSingleValue result=40 Value=cccccccc 11:10:15 SkyScan query 11:10:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:10:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:16 Parameters OK 11:10:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:16 Set A/D data flow result=40 11:10:16 Set A/D channel type result=40 11:10:16 Set A/D encoding result=40 11:10:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:16 Set channel filter=0.000000e+000 result=40 11:10:16 Config A/D Result=40 11:10:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:16 Get A/D filter: -9.255963e+061 result=40 11:10:16 Get A/D value=-858993460 result=40 11:10:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:16 Parameters OK 11:10:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:16 Set A/D data flow result=40 11:10:16 Set A/D channel type result=40 11:10:16 Set A/D encoding result=40 11:10:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:16 Set channel filter=0.000000e+000 result=40 11:10:16 Config A/D Result=40 11:10:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:16 Get A/D filter: -9.255963e+061 result=40 11:10:16 Get A/D value=-858993460 result=40 11:10:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:10:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:10:16 Aux= 11:10:16 Message to Camera, serial 121869 queued 11:10:24 Received message from Master: op=Shutter serial=121879 11:10:24 Shutter LASER close 11:10:25 Received message from Master: op=PointingHead serial=121883 11:10:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:10:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:10:25 Point started: ret=0 11:10:25 point_skyscan result=0 11:10:26 Check angles 11:10:26 SkyScan query 11:10:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.31<-21554 Statuses=0008 0009 11:10:26 Msec=0 True Az=112.995 Ze=-143.31 Az status=0008 Ze status=0009 11:10:27 Check angles 11:10:27 SkyScan query 11:10:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.875<-20125 Statuses=0008 0009 11:10:27 Msec=750 True Az=112.995 Ze=-121.875 Az status=0008 Ze status=0009 11:10:27 Check angles 11:10:27 SkyScan query 11:10:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.95<-18730 Statuses=0008 0009 11:10:28 Msec=1500 True Az=112.995 Ze=-100.95 Az status=0008 Ze status=0009 11:10:28 Check angles 11:10:28 SkyScan query 11:10:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 11:10:29 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 11:10:29 Check angles 11:10:29 SkyScan query 11:10:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.025<-15935 Statuses=0008 0009 11:10:29 Msec=3000 True Az=112.995 Ze=-59.025 Az status=0008 Ze status=0009 11:10:30 Check angles 11:10:30 SkyScan query 11:10:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 11:10:30 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 11:10:30 Check angles 11:10:30 SkyScan query 11:10:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.07<-13138 Statuses=0008 0009 11:10:31 Msec=4500 True Az=112.995 Ze=-17.07 Az status=0008 Ze status=0009 11:10:31 Check angles 11:10:31 SkyScan query 11:10:32 SkyScan query done: ret=0 az=112.995<-7533 ze=3.885<-11741 Statuses=0008 0009 11:10:32 Msec=5250 True Az=112.995 Ze=3.885 Az status=0008 Ze status=0009 11:10:32 Check angles 11:10:32 SkyScan query 11:10:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:10:32 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:10:32 Message to Master queued w/err=0: serial=121883 error=0 11:10:37 Received message from Master: op=Filter serial=121884 11:10:37 Color wheel filter change from 0 to 0 11:10:37 FLIGetFilterPos err=0 currentPosition=0 11:10:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:10:37 Filter is already there-color wheel unchanged 11:10:38 Received message from Master: op=Shutter serial=121885 11:10:38 Shutter LASER close 11:10:38 Received message from Camera: op=State serial=121887 11:10:38 GetSingleValue result=40 Value=cccccccc 11:10:38 SkyScan query 11:10:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:10:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:38 Parameters OK 11:10:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:38 Set A/D data flow result=40 11:10:38 Set A/D channel type result=40 11:10:38 Set A/D encoding result=40 11:10:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:38 Set channel filter=0.000000e+000 result=40 11:10:38 Config A/D Result=40 11:10:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:38 Get A/D filter: -9.255963e+061 result=40 11:10:38 Get A/D value=-858993460 result=40 11:10:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:38 Parameters OK 11:10:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:38 Set A/D data flow result=40 11:10:38 Set A/D channel type result=40 11:10:38 Set A/D encoding result=40 11:10:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:38 Set channel filter=0.000000e+000 result=40 11:10:38 Config A/D Result=40 11:10:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:38 Get A/D filter: -9.255963e+061 result=40 11:10:38 Get A/D value=-858993460 result=40 11:10:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:10:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:10:38 Aux= 11:10:38 Message to Camera, serial 121887 queued 11:11:15 Received message from Master: op=PointingHead serial=121900 11:11:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:11:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:11:16 Point started: ret=0 11:11:16 point_skyscan result=0 11:11:16 Check angles 11:11:16 SkyScan query 11:11:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:11:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:11:17 Message to Master queued w/err=0: serial=121900 error=0 11:11:22 Received message from Master: op=Filter serial=121901 11:11:22 Color wheel filter change from 0 to 0 11:11:22 FLIGetFilterPos err=0 currentPosition=0 11:11:22 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:22 Filter is already there-color wheel unchanged 11:11:22 Received message from Master: op=Shutter serial=121902 11:11:22 Shutter LASER close 11:11:22 Received message from Camera: op=State serial=121904 11:11:22 GetSingleValue result=40 Value=cccccccc 11:11:22 SkyScan query 11:11:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:11:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:23 Parameters OK 11:11:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:23 Set A/D data flow result=40 11:11:23 Set A/D channel type result=40 11:11:23 Set A/D encoding result=40 11:11:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:23 Set channel filter=0.000000e+000 result=40 11:11:23 Config A/D Result=40 11:11:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:23 Get A/D filter: -9.255963e+061 result=40 11:11:23 Get A/D value=-858993460 result=40 11:11:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:23 Parameters OK 11:11:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:23 Set A/D data flow result=40 11:11:23 Set A/D channel type result=40 11:11:23 Set A/D encoding result=40 11:11:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:23 Set channel filter=0.000000e+000 result=40 11:11:23 Config A/D Result=40 11:11:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:23 Get A/D filter: -9.255963e+061 result=40 11:11:23 Get A/D value=-858993460 result=40 11:11:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:23 Aux= 11:11:23 Message to Camera, serial 121904 queued 11:11:59 Received message from Master: op=PointingHead serial=121917 11:11:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:11:59 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:12:00 Point started: ret=0 11:12:00 point_skyscan result=0 11:12:01 Check angles 11:12:01 SkyScan query 11:12:01 SkyScan query done: ret=0 az=136.35<-9090 ze=-6.51<-12434 Statuses=0009 0008 11:12:01 Msec=0 True Az=136.35 Ze=-6.51 Az status=0009 Ze status=0008 11:12:01 Check angles 11:12:01 SkyScan query 11:12:02 SkyScan query done: ret=0 az=153.735<-10249 ze=-6.51<-12434 Statuses=0009 0008 11:12:02 Msec=750 True Az=153.735 Ze=-6.51 Az status=0009 Ze status=0008 11:12:02 Check angles 11:12:02 SkyScan query 11:12:03 SkyScan query done: ret=0 az=171.255<-11417 ze=-6.495<-12433 Statuses=0009 0008 11:12:03 Msec=1500 True Az=171.255 Ze=-6.495 Az status=0009 Ze status=0008 11:12:03 Check angles 11:12:03 SkyScan query 11:12:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:12:03 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:12:03 Message to Master queued w/err=0: serial=121917 error=0 11:12:08 Received message from Master: op=Filter serial=121918 11:12:08 Color wheel filter change from 0 to 0 11:12:08 FLIGetFilterPos err=0 currentPosition=0 11:12:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:08 Filter is already there-color wheel unchanged 11:12:09 Received message from Master: op=Shutter serial=121919 11:12:09 Shutter LASER close 11:12:09 Received message from Camera: op=State serial=121921 11:12:09 GetSingleValue result=40 Value=cccccccc 11:12:09 SkyScan query 11:12:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:12:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:09 Parameters OK 11:12:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:09 Set A/D data flow result=40 11:12:09 Set A/D channel type result=40 11:12:09 Set A/D encoding result=40 11:12:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:09 Set channel filter=0.000000e+000 result=40 11:12:09 Config A/D Result=40 11:12:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:09 Get A/D filter: -9.255963e+061 result=40 11:12:09 Get A/D value=-858993460 result=40 11:12:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:09 Parameters OK 11:12:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:09 Set A/D data flow result=40 11:12:09 Set A/D channel type result=40 11:12:09 Set A/D encoding result=40 11:12:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:09 Set channel filter=0.000000e+000 result=40 11:12:09 Config A/D Result=40 11:12:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:09 Get A/D filter: -9.255963e+061 result=40 11:12:09 Get A/D value=-858993460 result=40 11:12:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:09 Aux= 11:12:09 Message to Camera, serial 121921 queued 11:12:46 Received message from Master: op=PointingHead serial=121934 11:12:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:12:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:12:46 Point started: ret=0 11:12:46 point_skyscan result=0 11:12:47 Check angles 11:12:47 SkyScan query 11:12:48 SkyScan query done: ret=0 az=153.135<-10209 ze=6.51<-11566 Statuses=0009 0008 11:12:48 Msec=0 True Az=153.135 Ze=6.51 Az status=0009 Ze status=0008 11:12:48 Check angles 11:12:48 SkyScan query 11:12:48 SkyScan query done: ret=0 az=135.645<-9043 ze=6.495<-11567 Statuses=0009 0008 11:12:48 Msec=750 True Az=135.645 Ze=6.495 Az status=0009 Ze status=0008 11:12:49 Check angles 11:12:49 SkyScan query 11:12:49 SkyScan query done: ret=0 az=118.11<-7874 ze=6.495<-11567 Statuses=0009 0008 11:12:49 Msec=1500 True Az=118.11 Ze=6.495 Az status=0009 Ze status=0008 11:12:49 Check angles 11:12:49 SkyScan query 11:12:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:12:50 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:12:50 Message to Master queued w/err=0: serial=121934 error=0 11:12:55 Received message from Master: op=Filter serial=121935 11:12:55 Color wheel filter change from 0 to 0 11:12:55 FLIGetFilterPos err=0 currentPosition=0 11:12:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:55 Filter is already there-color wheel unchanged 11:12:55 Received message from Master: op=Shutter serial=121936 11:12:55 Shutter LASER close 11:12:55 Received message from Camera: op=State serial=121938 11:12:55 GetSingleValue result=40 Value=cccccccc 11:12:55 SkyScan query 11:12:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:12:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:56 Parameters OK 11:12:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:56 Set A/D data flow result=40 11:12:56 Set A/D channel type result=40 11:12:56 Set A/D encoding result=40 11:12:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:56 Set channel filter=0.000000e+000 result=40 11:12:56 Config A/D Result=40 11:12:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:56 Get A/D filter: -9.255963e+061 result=40 11:12:56 Get A/D value=-858993460 result=40 11:12:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:56 Parameters OK 11:12:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:56 Set A/D data flow result=40 11:12:56 Set A/D channel type result=40 11:12:56 Set A/D encoding result=40 11:12:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:56 Set channel filter=0.000000e+000 result=40 11:12:56 Config A/D Result=40 11:12:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:56 Get A/D filter: -9.255963e+061 result=40 11:12:56 Get A/D value=-858993460 result=40 11:12:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:56 Aux= 11:12:56 Message to Camera, serial 121938 queued 11:13:33 Received message from Master: op=PointingHead serial=121951 11:13:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:13:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:13:33 Point started: ret=0 11:13:33 point_skyscan result=0 11:13:34 Check angles 11:13:34 SkyScan query 11:13:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 11:13:34 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 11:13:34 Check angles 11:13:34 SkyScan query 11:13:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.07<-14938 Statuses=0008 0009 11:13:35 Msec=750 True Az=112.995 Ze=-44.07 Az status=0008 Ze status=0009 11:13:35 Check angles 11:13:35 SkyScan query 11:13:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.965<-16331 Statuses=0008 0009 11:13:36 Msec=1500 True Az=112.995 Ze=-64.965 Az status=0008 Ze status=0009 11:13:36 Check angles 11:13:36 SkyScan query 11:13:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.92<-17728 Statuses=0008 0009 11:13:37 Msec=2250 True Az=112.995 Ze=-85.92 Az status=0008 Ze status=0009 11:13:37 Check angles 11:13:37 SkyScan query 11:13:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.83<-19122 Statuses=0008 0009 11:13:37 Msec=3000 True Az=112.995 Ze=-106.83 Az status=0008 Ze status=0009 11:13:37 Check angles 11:13:37 SkyScan query 11:13:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.22<-20548 Statuses=0008 0009 11:13:38 Msec=3750 True Az=112.995 Ze=-128.22 Az status=0008 Ze status=0009 11:13:38 Check angles 11:13:38 SkyScan query 11:13:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.22<-21948 Statuses=0008 0009 11:13:39 Msec=4500 True Az=112.995 Ze=-149.22 Az status=0008 Ze status=0009 11:13:39 Check angles 11:13:39 SkyScan query 11:13:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.16<-23344 Statuses=0008 0009 11:13:40 Msec=5250 True Az=112.995 Ze=-170.16 Az status=0008 Ze status=0009 11:13:40 Check angles 11:13:40 SkyScan query 11:13:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:13:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:13:40 Message to Master queued w/err=0: serial=121951 error=0 11:13:45 Received message from Master: op=Filter serial=121952 11:13:45 Color wheel filter change from 0 to 0 11:13:45 FLIGetFilterPos err=0 currentPosition=0 11:13:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:13:45 Filter is already there-color wheel unchanged 11:13:45 Received message from Master: op=Shutter serial=121953 11:13:45 Shutter LASER open 11:13:46 Received message from Camera: op=State serial=121955 11:13:46 GetSingleValue result=40 Value=cccccccc 11:13:46 SkyScan query 11:13:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:13:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:46 Parameters OK 11:13:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:46 Set A/D data flow result=40 11:13:46 Set A/D channel type result=40 11:13:46 Set A/D encoding result=40 11:13:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:46 Set channel filter=0.000000e+000 result=40 11:13:46 Config A/D Result=40 11:13:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:46 Get A/D filter: -9.255963e+061 result=40 11:13:46 Get A/D value=-858993460 result=40 11:13:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:46 Parameters OK 11:13:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:46 Set A/D data flow result=40 11:13:46 Set A/D channel type result=40 11:13:46 Set A/D encoding result=40 11:13:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:46 Set channel filter=0.000000e+000 result=40 11:13:46 Config A/D Result=40 11:13:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:46 Get A/D filter: -9.255963e+061 result=40 11:13:46 Get A/D value=-858993460 result=40 11:13:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:13:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:13:46 Aux= 11:13:46 Message to Camera, serial 121955 queued 11:13:55 Received message from Master: op=Shutter serial=121965 11:13:55 Shutter LASER close 11:13:55 Received message from Master: op=PointingHead serial=121969 11:13:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:13:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:13:55 Point started: ret=0 11:13:55 point_skyscan result=0 11:13:56 Check angles 11:13:56 SkyScan query 11:13:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.77<-21518 Statuses=0008 0009 11:13:57 Msec=0 True Az=112.995 Ze=-142.77 Az status=0008 Ze status=0009 11:13:57 Check angles 11:13:57 SkyScan query 11:13:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.785<-20119 Statuses=0008 0009 11:13:58 Msec=750 True Az=112.995 Ze=-121.785 Az status=0008 Ze status=0009 11:13:58 Check angles 11:13:58 SkyScan query 11:13:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.845<-18723 Statuses=0008 0009 11:13:58 Msec=1500 True Az=112.995 Ze=-100.845 Az status=0008 Ze status=0009 11:13:58 Check angles 11:13:58 SkyScan query 11:13:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.89<-17326 Statuses=0008 0009 11:13:59 Msec=2250 True Az=112.995 Ze=-79.89 Az status=0008 Ze status=0009 11:13:59 Check angles 11:13:59 SkyScan query 11:14:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.935<-15929 Statuses=0008 0009 11:14:00 Msec=3000 True Az=112.995 Ze=-58.935 Az status=0008 Ze status=0009 11:14:00 Check angles 11:14:00 SkyScan query 11:14:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.905<-14527 Statuses=0008 0009 11:14:01 Msec=3750 True Az=112.995 Ze=-37.905 Az status=0008 Ze status=0009 11:14:01 Check angles 11:14:01 SkyScan query 11:14:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.965<-13131 Statuses=0008 0009 11:14:01 Msec=4500 True Az=112.995 Ze=-16.965 Az status=0008 Ze status=0009 11:14:01 Check angles 11:14:01 SkyScan query 11:14:02 SkyScan query done: ret=0 az=112.995<-7533 ze=3.99<-11734 Statuses=0008 0009 11:14:02 Msec=5250 True Az=112.995 Ze=3.99 Az status=0008 Ze status=0009 11:14:02 Check angles 11:14:02 SkyScan query 11:14:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:14:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:14:03 Message to Master queued w/err=0: serial=121969 error=0 11:14:08 Received message from Master: op=Filter serial=121970 11:14:08 Color wheel filter change from 0 to 0 11:14:08 FLIGetFilterPos err=0 currentPosition=0 11:14:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:08 Filter is already there-color wheel unchanged 11:14:08 Received message from Master: op=Shutter serial=121971 11:14:08 Shutter LASER close 11:14:08 Received message from Camera: op=State serial=121973 11:14:08 GetSingleValue result=40 Value=cccccccc 11:14:08 SkyScan query 11:14:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:14:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:09 Parameters OK 11:14:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:09 Set A/D data flow result=40 11:14:09 Set A/D channel type result=40 11:14:09 Set A/D encoding result=40 11:14:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:09 Set channel filter=0.000000e+000 result=40 11:14:09 Config A/D Result=40 11:14:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:09 Get A/D filter: -9.255963e+061 result=40 11:14:09 Get A/D value=-858993460 result=40 11:14:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:09 Parameters OK 11:14:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:09 Set A/D data flow result=40 11:14:09 Set A/D channel type result=40 [UTC 2019-3-5 11:14:09] 11:14:09 Set A/D encoding result=40 11:14:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:09 Set channel filter=0.000000e+000 result=40 11:14:09 Config A/D Result=40 11:14:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:09 Get A/D filter: -9.255963e+061 result=40 11:14:09 Get A/D value=-858993460 result=40 11:14:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:09 Aux= 11:14:09 Message to Camera, serial 121973 queued 11:14:46 Received message from Master: op=PointingHead serial=121986 11:14:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:14:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:14:46 Point started: ret=0 11:14:46 point_skyscan result=0 11:14:47 Check angles 11:14:47 SkyScan query 11:14:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:14:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:14:47 Message to Master queued w/err=0: serial=121986 error=0 11:14:52 Received message from Master: op=Filter serial=121987 11:14:52 Color wheel filter change from 0 to 0 11:14:52 FLIGetFilterPos err=0 currentPosition=0 11:14:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:52 Filter is already there-color wheel unchanged 11:14:52 Received message from Master: op=Shutter serial=121988 11:14:52 Shutter LASER close 11:14:52 Received message from Camera: op=State serial=121990 11:14:52 GetSingleValue result=40 Value=cccccccc 11:14:52 SkyScan query 11:14:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:14:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:53 Parameters OK 11:14:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:53 Set A/D data flow result=40 11:14:53 Set A/D channel type result=40 11:14:53 Set A/D encoding result=40 11:14:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:53 Set channel filter=0.000000e+000 result=40 11:14:53 Config A/D Result=40 11:14:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:53 Get A/D filter: -9.255963e+061 result=40 11:14:53 Get A/D value=-858993460 result=40 11:14:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:53 Parameters OK 11:14:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:53 Set A/D data flow result=40 11:14:53 Set A/D channel type result=40 11:14:53 Set A/D encoding result=40 11:14:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:53 Set channel filter=0.000000e+000 result=40 11:14:53 Config A/D Result=40 11:14:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:53 Get A/D filter: -9.255963e+061 result=40 11:14:53 Get A/D value=-858993460 result=40 11:14:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:53 Aux= 11:14:53 Message to Camera, serial 121990 queued 11:15:30 Received message from Master: op=PointingHead serial=122003 11:15:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:15:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:15:30 Point started: ret=0 11:15:30 point_skyscan result=0 11:15:31 Check angles 11:15:31 SkyScan query 11:15:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:15:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:15:32 Message to Master queued w/err=0: serial=122003 error=0 11:15:37 Received message from Master: op=Filter serial=122004 11:15:37 Color wheel filter change from 0 to 0 11:15:37 FLIGetFilterPos err=0 currentPosition=0 11:15:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:15:37 Filter is already there-color wheel unchanged 11:15:37 Received message from Master: op=Shutter serial=122005 11:15:37 Shutter LASER close 11:15:37 Received message from Camera: op=State serial=122007 11:15:37 GetSingleValue result=40 Value=cccccccc 11:15:37 SkyScan query 11:15:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:15:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:37 Parameters OK 11:15:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:37 Set A/D data flow result=40 11:15:37 Set A/D channel type result=40 11:15:37 Set A/D encoding result=40 11:15:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:37 Set channel filter=0.000000e+000 result=40 11:15:37 Config A/D Result=40 11:15:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:37 Get A/D filter: -9.255963e+061 result=40 11:15:37 Get A/D value=-858993460 result=40 11:15:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:37 Parameters OK 11:15:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:37 Set A/D data flow result=40 11:15:37 Set A/D channel type result=40 11:15:37 Set A/D encoding result=40 11:15:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:37 Set channel filter=0.000000e+000 result=40 11:15:37 Config A/D Result=40 11:15:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:37 Get A/D filter: -9.255963e+061 result=40 11:15:37 Get A/D value=-858993460 result=40 11:15:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:15:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:15:37 Aux= 11:15:37 Message to Camera, serial 122007 queued 11:16:14 Received message from Master: op=PointingHead serial=122020 11:16:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:16:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:16:15 Point started: ret=0 11:16:15 point_skyscan result=0 11:16:15 Check angles 11:16:15 SkyScan query 11:16:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:16:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:16:16 Message to Master queued w/err=0: serial=122020 error=0 11:16:21 Received message from Master: op=Filter serial=122021 11:16:21 Color wheel filter change from 0 to 0 11:16:21 FLIGetFilterPos err=0 currentPosition=0 11:16:21 FLIGetStepsRemaining err=0 RemainingSteps=0 11:16:21 Filter is already there-color wheel unchanged 11:16:21 Received message from Master: op=Shutter serial=122022 11:16:21 Shutter LASER close 11:16:21 Received message from Camera: op=State serial=122024 11:16:21 GetSingleValue result=40 Value=cccccccc 11:16:21 SkyScan query 11:16:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:16:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:22 Parameters OK 11:16:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:22 Set A/D data flow result=40 11:16:22 Set A/D channel type result=40 11:16:22 Set A/D encoding result=40 11:16:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:22 Set channel filter=0.000000e+000 result=40 11:16:22 Config A/D Result=40 11:16:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:22 Get A/D filter: -9.255963e+061 result=40 11:16:22 Get A/D value=-858993460 result=40 11:16:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:22 Parameters OK 11:16:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:22 Set A/D data flow result=40 11:16:22 Set A/D channel type result=40 11:16:22 Set A/D encoding result=40 11:16:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:22 Set channel filter=0.000000e+000 result=40 11:16:22 Config A/D Result=40 11:16:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:22 Get A/D filter: -9.255963e+061 result=40 11:16:22 Get A/D value=-858993460 result=40 11:16:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:16:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:16:22 Aux= 11:16:22 Message to Camera, serial 122024 queued 11:16:58 Received message from Master: op=PointingHead serial=122036 11:16:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:16:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:16:58 Point started: ret=0 11:16:58 point_skyscan result=0 11:16:59 Check angles 11:16:59 SkyScan query 11:16:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 11:16:59 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 11:16:59 Check angles 11:16:59 SkyScan query 11:17:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 11:17:00 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 11:17:00 Check angles 11:17:00 SkyScan query 11:17:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.64<-16376 Statuses=0008 0009 11:17:01 Msec=1500 True Az=112.995 Ze=-65.64 Az status=0008 Ze status=0009 11:17:01 Check angles 11:17:01 SkyScan query 11:17:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 11:17:01 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 11:17:02 Check angles 11:17:02 SkyScan query 11:17:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.03<-19202 Statuses=0008 0009 11:17:02 Msec=3000 True Az=112.995 Ze=-108.03 Az status=0008 Ze status=0009 11:17:02 Check angles 11:17:02 SkyScan query 11:17:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.405<-20627 Statuses=0008 0009 11:17:03 Msec=3750 True Az=112.995 Ze=-129.405 Az status=0008 Ze status=0009 11:17:03 Check angles 11:17:03 SkyScan query 11:17:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.33<-22022 Statuses=0008 0009 11:17:04 Msec=4500 True Az=112.995 Ze=-150.33 Az status=0008 Ze status=0009 11:17:04 Check angles 11:17:04 SkyScan query 11:17:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.435<-23429 Statuses=0008 0009 11:17:05 Msec=5250 True Az=112.995 Ze=-171.435 Az status=0008 Ze status=0009 11:17:05 Check angles 11:17:05 SkyScan query 11:17:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:17:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:17:05 Message to Master queued w/err=0: serial=122036 error=0 11:17:10 Received message from Master: op=Filter serial=122037 11:17:10 Color wheel filter change from 0 to 0 11:17:10 FLIGetFilterPos err=0 currentPosition=0 11:17:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:17:10 Filter is already there-color wheel unchanged 11:17:10 Received message from Master: op=Shutter serial=122038 11:17:10 Shutter LASER open 11:17:11 Received message from Camera: op=State serial=122040 11:17:11 GetSingleValue result=40 Value=cccccccc 11:17:11 SkyScan query 11:17:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:17:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:11 Parameters OK 11:17:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:11 Set A/D data flow result=40 11:17:11 Set A/D channel type result=40 11:17:11 Set A/D encoding result=40 11:17:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:11 Set channel filter=0.000000e+000 result=40 11:17:11 Config A/D Result=40 11:17:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:11 Get A/D filter: -9.255963e+061 result=40 11:17:11 Get A/D value=-858993460 result=40 11:17:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:11 Parameters OK 11:17:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:11 Set A/D data flow result=40 11:17:11 Set A/D channel type result=40 11:17:11 Set A/D encoding result=40 11:17:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:11 Set channel filter=0.000000e+000 result=40 11:17:11 Config A/D Result=40 11:17:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:11 Get A/D filter: -9.255963e+061 result=40 11:17:11 Get A/D value=-858993460 result=40 11:17:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:17:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:17:11 Aux= 11:17:11 Message to Camera, serial 122040 queued 11:17:20 Received message from Master: op=Shutter serial=122050 11:17:20 Shutter LASER close 11:17:20 Received message from Master: op=PointingHead serial=122054 11:17:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:17:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:17:21 Point started: ret=0 11:17:21 point_skyscan result=0 11:17:21 Check angles 11:17:21 SkyScan query 11:17:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 11:17:22 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 11:17:22 Check angles 11:17:22 SkyScan query 11:17:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 11:17:23 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 11:17:23 Check angles 11:17:23 SkyScan query 11:17:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 11:17:23 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 11:17:24 Check angles 11:17:24 SkyScan query 11:17:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.175<-17345 Statuses=0008 0009 11:17:24 Msec=2250 True Az=112.995 Ze=-80.175 Az status=0008 Ze status=0009 11:17:24 Check angles 11:17:24 SkyScan query 11:17:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 11:17:25 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 11:17:25 Check angles 11:17:25 SkyScan query 11:17:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.19<-14546 Statuses=0008 0009 11:17:26 Msec=3750 True Az=112.995 Ze=-38.19 Az status=0008 Ze status=0009 11:17:26 Check angles 11:17:26 SkyScan query 11:17:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.25<-13150 Statuses=0008 0009 11:17:26 Msec=4500 True Az=112.995 Ze=-17.25 Az status=0008 Ze status=0009 11:17:27 Check angles 11:17:27 SkyScan query 11:17:27 SkyScan query done: ret=0 az=112.995<-7533 ze=3.72<-11752 Statuses=0008 0009 11:17:27 Msec=5250 True Az=112.995 Ze=3.72 Az status=0008 Ze status=0009 11:17:27 Check angles 11:17:27 SkyScan query 11:17:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:17:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:17:28 Message to Master queued w/err=0: serial=122054 error=0 11:17:33 Received message from Master: op=Filter serial=122055 11:17:33 Color wheel filter change from 0 to 0 11:17:33 FLIGetFilterPos err=0 currentPosition=0 11:17:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:17:33 Filter is already there-color wheel unchanged 11:17:33 Received message from Master: op=Shutter serial=122056 11:17:33 Shutter LASER close 11:17:33 Received message from Camera: op=State serial=122058 11:17:33 GetSingleValue result=40 Value=cccccccc 11:17:33 SkyScan query 11:17:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:17:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:34 Parameters OK 11:17:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:34 Set A/D data flow result=40 11:17:34 Set A/D channel type result=40 11:17:34 Set A/D encoding result=40 11:17:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:34 Set channel filter=0.000000e+000 result=40 11:17:34 Config A/D Result=40 11:17:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:34 Get A/D filter: -9.255963e+061 result=40 11:17:34 Get A/D value=-858993460 result=40 11:17:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:34 Parameters OK 11:17:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:34 Set A/D data flow result=40 11:17:34 Set A/D channel type result=40 11:17:34 Set A/D encoding result=40 11:17:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:34 Set channel filter=0.000000e+000 result=40 11:17:34 Config A/D Result=40 11:17:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:34 Get A/D filter: -9.255963e+061 result=40 11:17:34 Get A/D value=-858993460 result=40 11:17:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:17:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:17:34 Aux= 11:17:34 Message to Camera, serial 122058 queued 11:18:11 Received message from Master: op=PointingHead serial=122071 11:18:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:18:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:18:11 Point started: ret=0 11:18:11 point_skyscan result=0 11:18:12 Check angles 11:18:12 SkyScan query 11:18:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:18:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:18:12 Message to Master queued w/err=0: serial=122071 error=0 11:18:17 Received message from Master: op=Filter serial=122072 11:18:17 Color wheel filter change from 0 to 0 11:18:17 FLIGetFilterPos err=0 currentPosition=0 11:18:17 FLIGetStepsRemaining err=0 RemainingSteps=0 11:18:17 Filter is already there-color wheel unchanged 11:18:18 Received message from Master: op=Shutter serial=122073 11:18:18 Shutter LASER close 11:18:18 Received message from Camera: op=State serial=122075 11:18:18 GetSingleValue result=40 Value=cccccccc 11:18:18 SkyScan query 11:18:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:18:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:18 Parameters OK 11:18:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:18 Set A/D data flow result=40 11:18:18 Set A/D channel type result=40 11:18:18 Set A/D encoding result=40 11:18:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:18 Set channel filter=0.000000e+000 result=40 11:18:18 Config A/D Result=40 11:18:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:18 Get A/D filter: -9.255963e+061 result=40 11:18:18 Get A/D value=-858993460 result=40 11:18:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:18 Parameters OK 11:18:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:18 Set A/D data flow result=40 11:18:18 Set A/D channel type result=40 11:18:18 Set A/D encoding result=40 11:18:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:18 Set channel filter=0.000000e+000 result=40 11:18:18 Config A/D Result=40 11:18:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:18 Get A/D filter: -9.255963e+061 result=40 11:18:18 Get A/D value=-858993460 result=40 11:18:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:18:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:18:18 Aux= 11:18:18 Message to Camera, serial 122075 queued 11:18:55 Received message from Master: op=PointingHead serial=122088 11:18:55 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:18:55 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:18:55 Point started: ret=0 11:18:55 point_skyscan result=0 11:18:56 Check angles 11:18:56 SkyScan query 11:18:57 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 11:18:57 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 11:18:57 Check angles 11:18:57 SkyScan query 11:18:57 SkyScan query done: ret=0 az=153.9<-10260 ze=-6.495<-12433 Statuses=0009 0008 11:18:57 Msec=750 True Az=153.9 Ze=-6.495 Az status=0009 Ze status=0008 11:18:58 Check angles 11:18:58 SkyScan query 11:18:58 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 11:18:58 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 11:18:58 Check angles 11:18:58 SkyScan query 11:18:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:18:59 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:18:59 Message to Master queued w/err=0: serial=122088 error=0 11:19:04 Received message from Master: op=Filter serial=122089 11:19:04 Color wheel filter change from 0 to 0 11:19:04 FLIGetFilterPos err=0 currentPosition=0 11:19:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:04 Filter is already there-color wheel unchanged 11:19:04 Received message from Master: op=Shutter serial=122090 11:19:04 Shutter LASER close 11:19:04 Received message from Camera: op=State serial=122092 11:19:04 GetSingleValue result=40 Value=cccccccc 11:19:04 SkyScan query 11:19:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:19:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:05 Parameters OK 11:19:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:05 Set A/D data flow result=40 11:19:05 Set A/D channel type result=40 11:19:05 Set A/D encoding result=40 11:19:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:05 Set channel filter=0.000000e+000 result=40 11:19:05 Config A/D Result=40 11:19:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:05 Get A/D filter: -9.255963e+061 result=40 11:19:05 Get A/D value=-858993460 result=40 11:19:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:05 Parameters OK 11:19:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:05 Set A/D data flow result=40 11:19:05 Set A/D channel type result=40 11:19:05 Set A/D encoding result=40 11:19:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:05 Set channel filter=0.000000e+000 result=40 11:19:05 Config A/D Result=40 11:19:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:05 Get A/D filter: -9.255963e+061 result=40 11:19:05 Get A/D value=-858993460 result=40 11:19:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:05 Aux= 11:19:05 Message to Camera, serial 122092 queued 11:19:42 Received message from Master: op=PointingHead serial=122105 11:19:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:19:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:19:42 Point started: ret=0 11:19:42 point_skyscan result=0 11:19:43 Check angles 11:19:43 SkyScan query 11:19:43 SkyScan query done: ret=0 az=153.255<-10217 ze=6.51<-11566 Statuses=0009 0008 11:19:43 Msec=0 True Az=153.255 Ze=6.51 Az status=0009 Ze status=0008 11:19:43 Check angles 11:19:43 SkyScan query 11:19:44 SkyScan query done: ret=0 az=135.345<-9023 ze=6.495<-11567 Statuses=0009 0008 11:19:44 Msec=750 True Az=135.345 Ze=6.495 Az status=0009 Ze status=0008 11:19:44 Check angles 11:19:44 SkyScan query 11:19:45 SkyScan query done: ret=0 az=117.87<-7858 ze=6.495<-11567 Statuses=0009 0008 11:19:45 Msec=1500 True Az=117.87 Ze=6.495 Az status=0009 Ze status=0008 11:19:45 Check angles 11:19:45 SkyScan query 11:19:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:19:45 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:19:45 Message to Master queued w/err=0: serial=122105 error=0 11:19:50 Received message from Master: op=Filter serial=122106 11:19:50 Color wheel filter change from 0 to 0 11:19:50 FLIGetFilterPos err=0 currentPosition=0 11:19:50 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:50 Filter is already there-color wheel unchanged 11:19:51 Received message from Master: op=Shutter serial=122107 11:19:51 Shutter LASER close 11:19:51 Received message from Camera: op=State serial=122109 11:19:51 GetSingleValue result=40 Value=cccccccc 11:19:51 SkyScan query 11:19:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:19:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:51 Parameters OK 11:19:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:51 Set A/D data flow result=40 11:19:51 Set A/D channel type result=40 11:19:51 Set A/D encoding result=40 11:19:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:51 Set channel filter=0.000000e+000 result=40 11:19:51 Config A/D Result=40 11:19:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:51 Get A/D filter: -9.255963e+061 result=40 11:19:51 Get A/D value=-858993460 result=40 11:19:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:51 Parameters OK 11:19:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:51 Set A/D data flow result=40 11:19:51 Set A/D channel type result=40 11:19:51 Set A/D encoding result=40 11:19:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:51 Set channel filter=0.000000e+000 result=40 11:19:51 Config A/D Result=40 11:19:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:51 Get A/D filter: -9.255963e+061 result=40 11:19:51 Get A/D value=-858993460 result=40 11:19:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:51 Aux= 11:19:51 Message to Camera, serial 122109 queued 11:20:27 Received message from Master: op=PointingHead serial=122121 11:20:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:20:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:20:28 Point started: ret=0 11:20:28 point_skyscan result=0 11:20:28 Check angles 11:20:28 SkyScan query 11:20:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 11:20:29 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 11:20:29 Check angles 11:20:29 SkyScan query 11:20:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.385<-14959 Statuses=0008 0009 11:20:30 Msec=750 True Az=112.995 Ze=-44.385 Az status=0008 Ze status=0009 11:20:30 Check angles 11:20:30 SkyScan query 11:20:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.31<-16354 Statuses=0008 0009 11:20:30 Msec=1500 True Az=112.995 Ze=-65.31 Az status=0008 Ze status=0009 11:20:31 Check angles 11:20:31 SkyScan query 11:20:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.265<-17751 Statuses=0008 0009 11:20:31 Msec=2250 True Az=112.995 Ze=-86.265 Az status=0008 Ze status=0009 11:20:31 Check angles 11:20:31 SkyScan query 11:20:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.205<-19147 Statuses=0008 0009 11:20:32 Msec=3000 True Az=112.995 Ze=-107.205 Az status=0008 Ze status=0009 11:20:32 Check angles 11:20:32 SkyScan query 11:20:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.175<-20545 Statuses=0008 0009 11:20:33 Msec=3750 True Az=112.995 Ze=-128.175 Az status=0008 Ze status=0009 11:20:33 Check angles 11:20:33 SkyScan query 11:20:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.64<-21976 Statuses=0008 0009 11:20:33 Msec=4500 True Az=112.995 Ze=-149.64 Az status=0008 Ze status=0009 11:20:34 Check angles 11:20:34 SkyScan query 11:20:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.91<-23394 Statuses=0008 0009 11:20:34 Msec=5250 True Az=112.995 Ze=-170.91 Az status=0008 Ze status=0009 11:20:34 Check angles 11:20:34 SkyScan query 11:20:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:20:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:20:35 Message to Master queued w/err=0: serial=122121 error=0 11:20:40 Received message from Master: op=Filter serial=122122 11:20:40 Color wheel filter change from 0 to 0 11:20:40 FLIGetFilterPos err=0 currentPosition=0 11:20:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:20:40 Filter is already there-color wheel unchanged 11:20:40 Received message from Master: op=Shutter serial=122123 11:20:40 Shutter LASER open 11:20:40 Received message from Camera: op=State serial=122125 11:20:40 GetSingleValue result=40 Value=cccccccc 11:20:40 SkyScan query 11:20:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:20:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:41 Parameters OK 11:20:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:41 Set A/D data flow result=40 11:20:41 Set A/D channel type result=40 11:20:41 Set A/D encoding result=40 11:20:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:41 Set channel filter=0.000000e+000 result=40 11:20:41 Config A/D Result=40 11:20:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:41 Get A/D filter: -9.255963e+061 result=40 11:20:41 Get A/D value=-858993460 result=40 11:20:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:41 Parameters OK 11:20:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:41 Set A/D data flow result=40 11:20:41 Set A/D channel type result=40 11:20:41 Set A/D encoding result=40 11:20:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:41 Set channel filter=0.000000e+000 result=40 11:20:41 Config A/D Result=40 11:20:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:41 Get A/D filter: -9.255963e+061 result=40 11:20:41 Get A/D value=-858993460 result=40 11:20:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:20:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:20:41 Aux= 11:20:41 Message to Camera, serial 122125 queued 11:20:49 Received message from Master: op=Shutter serial=122135 11:20:49 Shutter LASER close 11:20:50 Received message from Master: op=PointingHead serial=122139 11:20:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:20:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:20:50 Point started: ret=0 11:20:50 point_skyscan result=0 11:20:51 Check angles 11:20:51 SkyScan query 11:20:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 11:20:51 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 11:20:52 Check angles 11:20:52 SkyScan query 11:20:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.28<-20152 Statuses=0008 0009 11:20:52 Msec=750 True Az=112.995 Ze=-122.28 Az status=0008 Ze status=0009 11:20:52 Check angles 11:20:52 SkyScan query 11:20:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.875<-18725 Statuses=0008 0009 11:20:53 Msec=1500 True Az=112.995 Ze=-100.875 Az status=0008 Ze status=0009 11:20:53 Check angles 11:20:53 SkyScan query 11:20:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.395<-17293 Statuses=0008 0009 11:20:54 Msec=2250 True Az=112.995 Ze=-79.395 Az status=0008 Ze status=0009 11:20:54 Check angles 11:20:54 SkyScan query 11:20:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.455<-15897 Statuses=0008 0009 11:20:54 Msec=3000 True Az=112.995 Ze=-58.455 Az status=0008 Ze status=0009 11:20:55 Check angles 11:20:55 SkyScan query 11:20:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.53<-14502 Statuses=0008 0009 11:20:55 Msec=3750 True Az=112.995 Ze=-37.53 Az status=0008 Ze status=0009 11:20:55 Check angles 11:20:55 SkyScan query 11:20:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.56<-13104 Statuses=0008 0009 11:20:56 Msec=4500 True Az=112.995 Ze=-16.56 Az status=0008 Ze status=0009 11:20:56 Check angles 11:20:56 SkyScan query 11:20:57 SkyScan query done: ret=0 az=113.01<-7534 ze=4.305<-11713 Statuses=0008 0009 11:20:57 Msec=5250 True Az=113.01 Ze=4.305 Az status=0008 Ze status=0009 11:20:57 Check angles 11:20:57 SkyScan query 11:20:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:20:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:20:57 Message to Master queued w/err=0: serial=122139 error=0 11:21:02 Received message from Master: op=Filter serial=122140 11:21:02 Color wheel filter change from 0 to 0 11:21:02 FLIGetFilterPos err=0 currentPosition=0 11:21:02 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:02 Filter is already there-color wheel unchanged 11:21:03 Received message from Master: op=Shutter serial=122141 11:21:03 Shutter LASER close 11:21:03 Received message from Camera: op=State serial=122143 11:21:03 GetSingleValue result=40 Value=cccccccc 11:21:03 SkyScan query 11:21:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:21:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:03 Parameters OK 11:21:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:03 Set A/D data flow result=40 11:21:03 Set A/D channel type result=40 11:21:03 Set A/D encoding result=40 11:21:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:03 Set channel filter=0.000000e+000 result=40 11:21:03 Config A/D Result=40 11:21:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:03 Get A/D filter: -9.255963e+061 result=40 11:21:03 Get A/D value=-858993460 result=40 11:21:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:03 Parameters OK 11:21:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:03 Set A/D data flow result=40 11:21:03 Set A/D channel type result=40 11:21:03 Set A/D encoding result=40 11:21:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:03 Set channel filter=0.000000e+000 result=40 11:21:03 Config A/D Result=40 11:21:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:03 Get A/D filter: -9.255963e+061 result=40 11:21:03 Get A/D value=-858993460 result=40 11:21:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:03 Aux= 11:21:03 Message to Camera, serial 122143 queued 11:21:40 Received message from Master: op=PointingHead serial=122156 11:21:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:21:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:21:41 Point started: ret=0 11:21:41 point_skyscan result=0 11:21:41 Check angles 11:21:41 SkyScan query 11:21:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:21:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:21:42 Message to Master queued w/err=0: serial=122156 error=0 11:21:47 Received message from Master: op=Filter serial=122157 11:21:47 Color wheel filter change from 0 to 0 11:21:47 FLIGetFilterPos err=0 currentPosition=0 11:21:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:47 Filter is already there-color wheel unchanged 11:21:47 Received message from Master: op=Shutter serial=122158 11:21:47 Shutter LASER close 11:21:47 Received message from Camera: op=State serial=122160 11:21:47 GetSingleValue result=40 Value=cccccccc 11:21:47 SkyScan query 11:21:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:21:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:48 Parameters OK 11:21:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:48 Set A/D data flow result=40 11:21:48 Set A/D channel type result=40 11:21:48 Set A/D encoding result=40 11:21:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:48 Set channel filter=0.000000e+000 result=40 11:21:48 Config A/D Result=40 11:21:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:48 Get A/D filter: -9.255963e+061 result=40 11:21:48 Get A/D value=-858993460 result=40 11:21:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:48 Parameters OK 11:21:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:48 Set A/D data flow result=40 11:21:48 Set A/D channel type result=40 11:21:48 Set A/D encoding result=40 11:21:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:48 Set channel filter=0.000000e+000 result=40 11:21:48 Config A/D Result=40 11:21:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:48 Get A/D filter: -9.255963e+061 result=40 11:21:48 Get A/D value=-858993460 result=40 11:21:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:48 Aux= 11:21:48 Message to Camera, serial 122160 queued 11:22:24 Received message from Master: op=PointingHead serial=122173 11:22:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:22:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:22:25 Point started: ret=0 11:22:25 point_skyscan result=0 11:22:26 Check angles 11:22:26 SkyScan query 11:22:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:22:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:22:26 Message to Master queued w/err=0: serial=122173 error=0 11:22:31 Received message from Master: op=Filter serial=122174 11:22:31 Color wheel filter change from 0 to 0 11:22:31 FLIGetFilterPos err=0 currentPosition=0 11:22:31 FLIGetStepsRemaining err=0 RemainingSteps=0 11:22:31 Filter is already there-color wheel unchanged 11:22:31 Received message from Master: op=Shutter serial=122175 11:22:31 Shutter LASER close 11:22:31 Received message from Camera: op=State serial=122177 11:22:31 GetSingleValue result=40 Value=cccccccc 11:22:31 SkyScan query 11:22:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:22:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:32 Parameters OK 11:22:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:32 Set A/D data flow result=40 11:22:32 Set A/D channel type result=40 11:22:32 Set A/D encoding result=40 11:22:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:32 Set channel filter=0.000000e+000 result=40 11:22:32 Config A/D Result=40 11:22:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:32 Get A/D filter: -9.255963e+061 result=40 11:22:32 Get A/D value=-858993460 result=40 11:22:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:32 Parameters OK 11:22:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:32 Set A/D data flow result=40 11:22:32 Set A/D channel type result=40 11:22:32 Set A/D encoding result=40 11:22:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:32 Set channel filter=0.000000e+000 result=40 11:22:32 Config A/D Result=40 11:22:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:32 Get A/D filter: -9.255963e+061 result=40 11:22:32 Get A/D value=-858993460 result=40 11:22:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:22:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:22:32 Aux= 11:22:32 Message to Camera, serial 122177 queued 11:23:09 Received message from Master: op=PointingHead serial=122190 11:23:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:23:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:23:09 Point started: ret=0 11:23:09 point_skyscan result=0 11:23:10 Check angles 11:23:10 SkyScan query 11:23:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:23:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:23:10 Message to Master queued w/err=0: serial=122190 error=0 11:23:15 Received message from Master: op=Filter serial=122191 11:23:15 Color wheel filter change from 0 to 0 11:23:15 FLIGetFilterPos err=0 currentPosition=0 11:23:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:23:15 Filter is already there-color wheel unchanged 11:23:16 Received message from Master: op=Shutter serial=122192 11:23:16 Shutter LASER close 11:23:16 Received message from Camera: op=State serial=122194 11:23:16 GetSingleValue result=40 Value=cccccccc 11:23:16 SkyScan query 11:23:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:23:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:16 Parameters OK 11:23:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:16 Set A/D data flow result=40 11:23:16 Set A/D channel type result=40 11:23:16 Set A/D encoding result=40 11:23:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:16 Set channel filter=0.000000e+000 result=40 11:23:16 Config A/D Result=40 11:23:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:16 Get A/D filter: -9.255963e+061 result=40 11:23:16 Get A/D value=-858993460 result=40 11:23:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:16 Parameters OK 11:23:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:16 Set A/D data flow result=40 11:23:16 Set A/D channel type result=40 11:23:16 Set A/D encoding result=40 11:23:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:16 Set channel filter=0.000000e+000 result=40 11:23:16 Config A/D Result=40 11:23:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:16 Get A/D filter: -9.255963e+061 result=40 11:23:16 Get A/D value=-858993460 result=40 11:23:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:23:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:23:16 Aux= 11:23:16 Message to Camera, serial 122194 queued [UTC 2019-3-5 11:23:50] 11:23:53 Received message from Master: op=PointingHead serial=122207 11:23:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:23:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:23:53 Point started: ret=0 11:23:53 point_skyscan result=0 11:23:54 Check angles 11:23:54 SkyScan query 11:23:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 11:23:55 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 11:23:55 Check angles 11:23:55 SkyScan query 11:23:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 11:23:55 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 11:23:56 Check angles 11:23:56 SkyScan query 11:23:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 11:23:56 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 11:23:56 Check angles 11:23:56 SkyScan query 11:23:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.355<-17757 Statuses=0008 0009 11:23:57 Msec=2250 True Az=112.995 Ze=-86.355 Az status=0008 Ze status=0009 11:23:57 Check angles 11:23:57 SkyScan query 11:23:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.295<-19153 Statuses=0008 0009 11:23:58 Msec=3000 True Az=112.995 Ze=-107.295 Az status=0008 Ze status=0009 11:23:58 Check angles 11:23:58 SkyScan query 11:23:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.265<-20551 Statuses=0008 0009 11:23:58 Msec=3750 True Az=112.995 Ze=-128.265 Az status=0008 Ze status=0009 11:23:59 Check angles 11:23:59 SkyScan query 11:23:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 11:23:59 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 11:23:59 Check angles 11:23:59 SkyScan query 11:24:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.625<-23375 Statuses=0008 0009 11:24:00 Msec=5250 True Az=112.995 Ze=-170.625 Az status=0008 Ze status=0009 11:24:00 Check angles 11:24:00 SkyScan query 11:24:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:24:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:24:01 Message to Master queued w/err=0: serial=122207 error=0 11:24:06 Received message from Master: op=Filter serial=122208 11:24:06 Color wheel filter change from 0 to 0 11:24:06 FLIGetFilterPos err=0 currentPosition=0 11:24:06 FLIGetStepsRemaining err=0 RemainingSteps=0 11:24:06 Filter is already there-color wheel unchanged 11:24:06 Received message from Master: op=Shutter serial=122209 11:24:06 Shutter LASER open 11:24:06 Received message from Camera: op=State serial=122211 11:24:06 GetSingleValue result=40 Value=cccccccc 11:24:06 SkyScan query 11:24:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:24:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:07 Parameters OK 11:24:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:07 Set A/D data flow result=40 11:24:07 Set A/D channel type result=40 11:24:07 Set A/D encoding result=40 11:24:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:07 Set channel filter=0.000000e+000 result=40 11:24:07 Config A/D Result=40 11:24:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:07 Get A/D filter: -9.255963e+061 result=40 11:24:07 Get A/D value=-858993460 result=40 11:24:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:07 Parameters OK 11:24:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:07 Set A/D data flow result=40 11:24:07 Set A/D channel type result=40 11:24:07 Set A/D encoding result=40 11:24:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:07 Set channel filter=0.000000e+000 result=40 11:24:07 Config A/D Result=40 11:24:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:07 Get A/D filter: -9.255963e+061 result=40 11:24:07 Get A/D value=-858993460 result=40 11:24:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:24:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:24:07 Aux= 11:24:07 Message to Camera, serial 122211 queued 11:24:15 Received message from Master: op=Shutter serial=122221 11:24:15 Shutter LASER close 11:24:16 Received message from Master: op=PointingHead serial=122225 11:24:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:24:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:24:16 Point started: ret=0 11:24:16 point_skyscan result=0 11:24:17 Check angles 11:24:17 SkyScan query 11:24:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 11:24:17 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 11:24:18 Check angles 11:24:18 SkyScan query 11:24:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.19<-20146 Statuses=0008 0009 11:24:18 Msec=750 True Az=112.995 Ze=-122.19 Az status=0008 Ze status=0009 11:24:18 Check angles 11:24:18 SkyScan query 11:24:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.785<-18719 Statuses=0008 0009 11:24:19 Msec=1500 True Az=112.995 Ze=-100.785 Az status=0008 Ze status=0009 11:24:19 Check angles 11:24:19 SkyScan query 11:24:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.815<-17321 Statuses=0008 0009 11:24:20 Msec=2250 True Az=112.995 Ze=-79.815 Az status=0008 Ze status=0009 11:24:20 Check angles 11:24:20 SkyScan query 11:24:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.89<-15926 Statuses=0008 0009 11:24:20 Msec=3000 True Az=112.995 Ze=-58.89 Az status=0008 Ze status=0009 11:24:21 Check angles 11:24:21 SkyScan query 11:24:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.5<-14500 Statuses=0008 0009 11:24:21 Msec=3750 True Az=112.995 Ze=-37.5 Az status=0008 Ze status=0009 11:24:21 Check angles 11:24:21 SkyScan query 11:24:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.515<-13101 Statuses=0008 0009 11:24:22 Msec=4500 True Az=112.995 Ze=-16.515 Az status=0008 Ze status=0009 11:24:22 Check angles 11:24:22 SkyScan query 11:24:23 SkyScan query done: ret=0 az=113.01<-7534 ze=4.35<-11710 Statuses=0008 0009 11:24:23 Msec=5250 True Az=113.01 Ze=4.35 Az status=0008 Ze status=0009 11:24:23 Check angles 11:24:23 SkyScan query 11:24:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:24:23 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:24:23 Message to Master queued w/err=0: serial=122225 error=0 11:24:28 Received message from Master: op=Filter serial=122226 11:24:28 Color wheel filter change from 0 to 0 11:24:28 FLIGetFilterPos err=0 currentPosition=0 11:24:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:24:28 Filter is already there-color wheel unchanged 11:24:29 Received message from Master: op=Shutter serial=122227 11:24:29 Shutter LASER close 11:24:29 Received message from Camera: op=State serial=122229 11:24:29 GetSingleValue result=40 Value=cccccccc 11:24:29 SkyScan query 11:24:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:24:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:29 Parameters OK 11:24:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:29 Set A/D data flow result=40 11:24:29 Set A/D channel type result=40 11:24:29 Set A/D encoding result=40 11:24:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:29 Set channel filter=0.000000e+000 result=40 11:24:29 Config A/D Result=40 11:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:29 Get A/D filter: -9.255963e+061 result=40 11:24:29 Get A/D value=-858993460 result=40 11:24:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:29 Parameters OK 11:24:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:29 Set A/D data flow result=40 11:24:29 Set A/D channel type result=40 11:24:29 Set A/D encoding result=40 11:24:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:29 Set channel filter=0.000000e+000 result=40 11:24:29 Config A/D Result=40 11:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:29 Get A/D filter: -9.255963e+061 result=40 11:24:29 Get A/D value=-858993460 result=40 11:24:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:24:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:24:29 Aux= 11:24:29 Message to Camera, serial 122229 queued 11:25:06 Received message from Master: op=PointingHead serial=122242 11:25:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:25:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:25:07 Point started: ret=0 11:25:07 point_skyscan result=0 11:25:07 Check angles 11:25:07 SkyScan query 11:25:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:25:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:25:08 Message to Master queued w/err=0: serial=122242 error=0 11:25:13 Received message from Master: op=Filter serial=122243 11:25:13 Color wheel filter change from 0 to 0 11:25:13 FLIGetFilterPos err=0 currentPosition=0 11:25:13 FLIGetStepsRemaining err=0 RemainingSteps=0 11:25:13 Filter is already there-color wheel unchanged 11:25:13 Received message from Master: op=Shutter serial=122244 11:25:13 Shutter LASER close 11:25:13 Received message from Camera: op=State serial=122246 11:25:13 GetSingleValue result=40 Value=cccccccc 11:25:13 SkyScan query 11:25:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:25:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:14 Parameters OK 11:25:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:14 Set A/D data flow result=40 11:25:14 Set A/D channel type result=40 11:25:14 Set A/D encoding result=40 11:25:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:14 Set channel filter=0.000000e+000 result=40 11:25:14 Config A/D Result=40 11:25:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:14 Get A/D filter: -9.255963e+061 result=40 11:25:14 Get A/D value=-858993460 result=40 11:25:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:14 Parameters OK 11:25:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:14 Set A/D data flow result=40 11:25:14 Set A/D channel type result=40 11:25:14 Set A/D encoding result=40 11:25:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:14 Set channel filter=0.000000e+000 result=40 11:25:14 Config A/D Result=40 11:25:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:14 Get A/D filter: -9.255963e+061 result=40 11:25:14 Get A/D value=-858993460 result=40 11:25:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:25:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:25:14 Aux= 11:25:14 Message to Camera, serial 122246 queued 11:25:51 Received message from Master: op=PointingHead serial=122259 11:25:51 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:25:51 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:25:51 Point started: ret=0 11:25:51 point_skyscan result=0 11:25:52 Check angles 11:25:52 SkyScan query 11:25:52 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 11:25:52 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 11:25:52 Check angles 11:25:52 SkyScan query 11:25:53 SkyScan query done: ret=0 az=153.915<-10261 ze=-6.51<-12434 Statuses=0009 0008 11:25:53 Msec=750 True Az=153.915 Ze=-6.51 Az status=0009 Ze status=0008 11:25:53 Check angles 11:25:53 SkyScan query 11:25:54 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 11:25:54 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 11:25:54 Check angles 11:25:54 SkyScan query 11:25:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:25:55 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:25:55 Message to Master queued w/err=0: serial=122259 error=0 11:26:00 Received message from Master: op=Filter serial=122260 11:26:00 Color wheel filter change from 0 to 0 11:26:00 FLIGetFilterPos err=0 currentPosition=0 11:26:00 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:00 Filter is already there-color wheel unchanged 11:26:00 Received message from Master: op=Shutter serial=122261 11:26:00 Shutter LASER close 11:26:00 Received message from Camera: op=State serial=122263 11:26:00 GetSingleValue result=40 Value=cccccccc 11:26:00 SkyScan query 11:26:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:26:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:00 Parameters OK 11:26:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:00 Set A/D data flow result=40 11:26:00 Set A/D channel type result=40 11:26:00 Set A/D encoding result=40 11:26:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:00 Set channel filter=0.000000e+000 result=40 11:26:00 Config A/D Result=40 11:26:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:00 Get A/D filter: -9.255963e+061 result=40 11:26:00 Get A/D value=-858993460 result=40 11:26:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:00 Parameters OK 11:26:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:00 Set A/D data flow result=40 11:26:00 Set A/D channel type result=40 11:26:00 Set A/D encoding result=40 11:26:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:00 Set channel filter=0.000000e+000 result=40 11:26:00 Config A/D Result=40 11:26:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:00 Get A/D filter: -9.255963e+061 result=40 11:26:00 Get A/D value=-858993460 result=40 11:26:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:00 Aux= 11:26:00 Message to Camera, serial 122263 queued 11:26:37 Received message from Master: op=PointingHead serial=122276 11:26:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:26:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:26:38 Point started: ret=0 11:26:38 point_skyscan result=0 11:26:38 Check angles 11:26:38 SkyScan query 11:26:39 SkyScan query done: ret=0 az=152.85<-10190 ze=6.51<-11566 Statuses=0009 0008 11:26:39 Msec=0 True Az=152.85 Ze=6.51 Az status=0009 Ze status=0008 11:26:39 Check angles 11:26:39 SkyScan query 11:26:40 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 11:26:40 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 11:26:40 Check angles 11:26:40 SkyScan query 11:26:40 SkyScan query done: ret=0 az=117.615<-7841 ze=6.495<-11567 Statuses=0009 0008 11:26:40 Msec=1500 True Az=117.615 Ze=6.495 Az status=0009 Ze status=0008 11:26:41 Check angles 11:26:41 SkyScan query 11:26:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:26:41 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:26:41 Message to Master queued w/err=0: serial=122276 error=0 11:26:46 Received message from Master: op=Filter serial=122277 11:26:46 Color wheel filter change from 0 to 0 11:26:46 FLIGetFilterPos err=0 currentPosition=0 11:26:46 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:46 Filter is already there-color wheel unchanged 11:26:46 Received message from Master: op=Shutter serial=122278 11:26:46 Shutter LASER close 11:26:46 Received message from Camera: op=State serial=122280 11:26:46 GetSingleValue result=40 Value=cccccccc 11:26:46 SkyScan query 11:26:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:26:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:47 Parameters OK 11:26:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:47 Set A/D data flow result=40 11:26:47 Set A/D channel type result=40 11:26:47 Set A/D encoding result=40 11:26:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:47 Set channel filter=0.000000e+000 result=40 11:26:47 Config A/D Result=40 11:26:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:47 Get A/D filter: -9.255963e+061 result=40 11:26:47 Get A/D value=-858993460 result=40 11:26:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:47 Parameters OK 11:26:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:47 Set A/D data flow result=40 11:26:47 Set A/D channel type result=40 11:26:47 Set A/D encoding result=40 11:26:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:47 Set channel filter=0.000000e+000 result=40 11:26:47 Config A/D Result=40 11:26:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:47 Get A/D filter: -9.255963e+061 result=40 11:26:47 Get A/D value=-858993460 result=40 11:26:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:47 Aux= 11:26:47 Message to Camera, serial 122280 queued 11:27:24 Received message from Master: op=PointingHead serial=122293 11:27:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:27:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:27:24 Point started: ret=0 11:27:24 point_skyscan result=0 11:27:25 Check angles 11:27:25 SkyScan query 11:27:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 11:27:25 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 11:27:26 Check angles 11:27:26 SkyScan query 11:27:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.925<-14995 Statuses=0008 0009 11:27:26 Msec=750 True Az=112.995 Ze=-44.925 Az status=0008 Ze status=0009 11:27:26 Check angles 11:27:26 SkyScan query 11:27:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.925<-16395 Statuses=0008 0009 11:27:27 Msec=1500 True Az=112.995 Ze=-65.925 Az status=0008 Ze status=0009 11:27:27 Check angles 11:27:27 SkyScan query 11:27:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.91<-17794 Statuses=0008 0009 11:27:28 Msec=2250 True Az=112.995 Ze=-86.91 Az status=0008 Ze status=0009 11:27:28 Check angles 11:27:28 SkyScan query 11:27:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.33<-19222 Statuses=0008 0009 11:27:28 Msec=3000 True Az=112.995 Ze=-108.33 Az status=0008 Ze status=0009 11:27:29 Check angles 11:27:29 SkyScan query 11:27:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.27<-20618 Statuses=0008 0009 11:27:29 Msec=3750 True Az=112.995 Ze=-129.27 Az status=0008 Ze status=0009 11:27:29 Check angles 11:27:29 SkyScan query 11:27:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.195<-22013 Statuses=0008 0009 11:27:30 Msec=4500 True Az=112.995 Ze=-150.195 Az status=0008 Ze status=0009 11:27:30 Check angles 11:27:30 SkyScan query 11:27:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 11:27:31 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 11:27:31 Check angles 11:27:31 SkyScan query 11:27:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:27:31 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:27:31 Message to Master queued w/err=0: serial=122293 error=0 11:27:36 Received message from Master: op=Filter serial=122294 11:27:36 Color wheel filter change from 0 to 0 11:27:36 FLIGetFilterPos err=0 currentPosition=0 11:27:36 FLIGetStepsRemaining err=0 RemainingSteps=0 11:27:36 Filter is already there-color wheel unchanged 11:27:37 Received message from Master: op=Shutter serial=122295 11:27:37 Shutter LASER open 11:27:37 Received message from Camera: op=State serial=122297 11:27:37 GetSingleValue result=40 Value=cccccccc 11:27:37 SkyScan query 11:27:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:27:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:37 Parameters OK 11:27:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:37 Set A/D data flow result=40 11:27:37 Set A/D channel type result=40 11:27:37 Set A/D encoding result=40 11:27:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:37 Set channel filter=0.000000e+000 result=40 11:27:37 Config A/D Result=40 11:27:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:37 Get A/D filter: -9.255963e+061 result=40 11:27:37 Get A/D value=-858993460 result=40 11:27:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:37 Parameters OK 11:27:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:37 Set A/D data flow result=40 11:27:37 Set A/D channel type result=40 11:27:37 Set A/D encoding result=40 11:27:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:37 Set channel filter=0.000000e+000 result=40 11:27:37 Config A/D Result=40 11:27:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:37 Get A/D filter: -9.255963e+061 result=40 11:27:37 Get A/D value=-858993460 result=40 11:27:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:27:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:27:37 Aux= 11:27:37 Message to Camera, serial 122297 queued 11:27:46 Received message from Master: op=Shutter serial=122307 11:27:46 Shutter LASER close 11:27:46 Received message from Master: op=PointingHead serial=122311 11:27:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:27:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:27:47 Point started: ret=0 11:27:47 point_skyscan result=0 11:27:47 Check angles 11:27:47 SkyScan query 11:27:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.8<-21520 Statuses=0008 0009 11:27:48 Msec=0 True Az=112.995 Ze=-142.8 Az status=0008 Ze status=0009 11:27:48 Check angles 11:27:48 SkyScan query 11:27:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.365<-20091 Statuses=0008 0009 11:27:49 Msec=750 True Az=112.995 Ze=-121.365 Az status=0008 Ze status=0009 11:27:49 Check angles 11:27:49 SkyScan query 11:27:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.38<-18692 Statuses=0008 0009 11:27:49 Msec=1500 True Az=112.995 Ze=-100.38 Az status=0008 Ze status=0009 11:27:50 Check angles 11:27:50 SkyScan query 11:27:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.41<-17294 Statuses=0008 0009 11:27:50 Msec=2250 True Az=112.995 Ze=-79.41 Az status=0008 Ze status=0009 11:27:50 Check angles 11:27:50 SkyScan query 11:27:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.455<-15897 Statuses=0008 0009 11:27:51 Msec=3000 True Az=112.995 Ze=-58.455 Az status=0008 Ze status=0009 11:27:51 Check angles 11:27:51 SkyScan query 11:27:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.155<-14477 Statuses=0008 0009 11:27:52 Msec=3750 True Az=112.995 Ze=-37.155 Az status=0008 Ze status=0009 11:27:52 Check angles 11:27:52 SkyScan query 11:27:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.185<-13079 Statuses=0008 0009 11:27:52 Msec=4500 True Az=112.995 Ze=-16.185 Az status=0008 Ze status=0009 11:27:53 Check angles 11:27:53 SkyScan query 11:27:53 SkyScan query done: ret=0 az=112.995<-7533 ze=4.605<-11693 Statuses=0008 0009 11:27:53 Msec=5250 True Az=112.995 Ze=4.605 Az status=0008 Ze status=0009 11:27:53 Check angles 11:27:53 SkyScan query 11:27:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:27:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:27:54 Message to Master queued w/err=0: serial=122311 error=0 11:27:59 Received message from Master: op=Filter serial=122312 11:27:59 Color wheel filter change from 0 to 0 11:27:59 FLIGetFilterPos err=0 currentPosition=0 11:27:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:27:59 Filter is already there-color wheel unchanged 11:27:59 Received message from Master: op=Shutter serial=122313 11:27:59 Shutter LASER close 11:27:59 Received message from Camera: op=State serial=122315 11:27:59 GetSingleValue result=40 Value=cccccccc 11:27:59 SkyScan query 11:28:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:28:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:00 Parameters OK 11:28:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:00 Set A/D data flow result=40 11:28:00 Set A/D channel type result=40 11:28:00 Set A/D encoding result=40 11:28:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:00 Set channel filter=0.000000e+000 result=40 11:28:00 Config A/D Result=40 11:28:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:00 Get A/D filter: -9.255963e+061 result=40 11:28:00 Get A/D value=-858993460 result=40 11:28:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:00 Parameters OK 11:28:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:00 Set A/D data flow result=40 11:28:00 Set A/D channel type result=40 11:28:00 Set A/D encoding result=40 11:28:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:00 Set channel filter=0.000000e+000 result=40 11:28:00 Config A/D Result=40 11:28:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:00 Get A/D filter: -9.255963e+061 result=40 11:28:00 Get A/D value=-858993460 result=40 11:28:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:00 Aux= 11:28:00 Message to Camera, serial 122315 queued 11:28:37 Received message from Master: op=PointingHead serial=122328 11:28:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:28:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:28:37 Point started: ret=0 11:28:37 point_skyscan result=0 11:28:38 Check angles 11:28:38 SkyScan query 11:28:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:28:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:28:38 Message to Master queued w/err=0: serial=122328 error=0 11:28:43 Received message from Master: op=Filter serial=122329 11:28:43 Color wheel filter change from 0 to 0 11:28:43 FLIGetFilterPos err=0 currentPosition=0 11:28:43 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:43 Filter is already there-color wheel unchanged 11:28:44 Received message from Master: op=Shutter serial=122330 11:28:44 Shutter LASER close 11:28:44 Received message from Camera: op=State serial=122332 11:28:44 GetSingleValue result=40 Value=cccccccc 11:28:44 SkyScan query 11:28:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:28:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:44 Parameters OK 11:28:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:44 Set A/D data flow result=40 11:28:44 Set A/D channel type result=40 11:28:44 Set A/D encoding result=40 11:28:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:44 Set channel filter=0.000000e+000 result=40 11:28:44 Config A/D Result=40 11:28:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:44 Get A/D filter: -9.255963e+061 result=40 11:28:44 Get A/D value=-858993460 result=40 11:28:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:44 Parameters OK 11:28:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:44 Set A/D data flow result=40 11:28:44 Set A/D channel type result=40 11:28:44 Set A/D encoding result=40 11:28:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:44 Set channel filter=0.000000e+000 result=40 11:28:44 Config A/D Result=40 11:28:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:44 Get A/D filter: -9.255963e+061 result=40 11:28:44 Get A/D value=-858993460 result=40 11:28:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:44 Aux= 11:28:44 Message to Camera, serial 122332 queued 11:29:21 Received message from Master: op=PointingHead serial=122345 11:29:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:29:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:29:21 Point started: ret=0 11:29:21 point_skyscan result=0 11:29:22 Check angles 11:29:22 SkyScan query 11:29:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:29:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:29:23 Message to Master queued w/err=0: serial=122345 error=0 11:29:28 Received message from Master: op=Filter serial=122346 11:29:28 Color wheel filter change from 0 to 0 11:29:28 FLIGetFilterPos err=0 currentPosition=0 11:29:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:29:28 Filter is already there-color wheel unchanged 11:29:28 Received message from Master: op=Shutter serial=122347 11:29:28 Shutter LASER close 11:29:28 Received message from Camera: op=State serial=122349 11:29:28 GetSingleValue result=40 Value=cccccccc 11:29:28 SkyScan query 11:29:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:29:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:29 Parameters OK 11:29:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:29 Set A/D data flow result=40 11:29:29 Set A/D channel type result=40 11:29:29 Set A/D encoding result=40 11:29:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:29 Set channel filter=0.000000e+000 result=40 11:29:29 Config A/D Result=40 11:29:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:29 Get A/D filter: -9.255963e+061 result=40 11:29:29 Get A/D value=-858993460 result=40 11:29:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:29 Parameters OK 11:29:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:29 Set A/D data flow result=40 11:29:29 Set A/D channel type result=40 11:29:29 Set A/D encoding result=40 11:29:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:29 Set channel filter=0.000000e+000 result=40 11:29:29 Config A/D Result=40 11:29:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:29 Get A/D filter: -9.255963e+061 result=40 11:29:29 Get A/D value=-858993460 result=40 11:29:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:29:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:29:29 Aux= 11:29:29 Message to Camera, serial 122349 queued 11:30:05 Received message from Master: op=PointingHead serial=122362 11:30:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:30:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:30:06 Point started: ret=0 11:30:06 point_skyscan result=0 11:30:06 Check angles 11:30:06 SkyScan query 11:30:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:30:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:30:07 Message to Master queued w/err=0: serial=122362 error=0 11:30:12 Received message from Master: op=Filter serial=122363 11:30:12 Color wheel filter change from 0 to 0 11:30:12 FLIGetFilterPos err=0 currentPosition=0 11:30:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:30:12 Filter is already there-color wheel unchanged 11:30:12 Received message from Master: op=Shutter serial=122364 11:30:12 Shutter LASER close 11:30:12 Received message from Camera: op=State serial=122366 11:30:12 GetSingleValue result=40 Value=cccccccc 11:30:12 SkyScan query 11:30:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:30:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:13 Parameters OK 11:30:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:13 Set A/D data flow result=40 11:30:13 Set A/D channel type result=40 11:30:13 Set A/D encoding result=40 11:30:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:13 Set channel filter=0.000000e+000 result=40 11:30:13 Config A/D Result=40 11:30:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:13 Get A/D filter: -9.255963e+061 result=40 11:30:13 Get A/D value=-858993460 result=40 11:30:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:13 Parameters OK 11:30:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:13 Set A/D data flow result=40 11:30:13 Set A/D channel type result=40 11:30:13 Set A/D encoding result=40 11:30:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:13 Set channel filter=0.000000e+000 result=40 11:30:13 Config A/D Result=40 11:30:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:13 Get A/D filter: -9.255963e+061 result=40 11:30:13 Get A/D value=-858993460 result=40 11:30:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:30:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:30:13 Aux= 11:30:13 Message to Camera, serial 122366 queued 11:30:50 Received message from Master: op=PointingHead serial=122379 11:30:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:30:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:30:50 Point started: ret=0 11:30:50 point_skyscan result=0 11:30:51 Check angles 11:30:51 SkyScan query 11:30:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.22<-13548 Statuses=0008 0009 11:30:51 Msec=0 True Az=112.995 Ze=-23.22 Az status=0008 Ze status=0009 11:30:52 Check angles 11:30:52 SkyScan query 11:30:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.19<-14946 Statuses=0008 0009 11:30:52 Msec=750 True Az=112.995 Ze=-44.19 Az status=0008 Ze status=0009 11:30:52 Check angles 11:30:52 SkyScan query 11:30:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.115<-16341 Statuses=0008 0009 11:30:53 Msec=1500 True Az=112.995 Ze=-65.115 Az status=0008 Ze status=0009 11:30:53 Check angles 11:30:53 SkyScan query 11:30:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.04<-17736 Statuses=0008 0009 11:30:54 Msec=2250 True Az=112.995 Ze=-86.04 Az status=0008 Ze status=0009 11:30:54 Check angles 11:30:54 SkyScan query 11:30:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 11:30:54 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 11:30:55 Check angles 11:30:55 SkyScan query 11:30:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.385<-20559 Statuses=0008 0009 11:30:55 Msec=3750 True Az=112.995 Ze=-128.385 Az status=0008 Ze status=0009 11:30:55 Check angles 11:30:55 SkyScan query 11:30:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.37<-21958 Statuses=0008 0009 11:30:56 Msec=4500 True Az=112.995 Ze=-149.37 Az status=0008 Ze status=0009 11:30:56 Check angles 11:30:56 SkyScan query 11:30:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.73<-23382 Statuses=0008 0009 11:30:57 Msec=5250 True Az=112.995 Ze=-170.73 Az status=0008 Ze status=0009 11:30:57 Check angles 11:30:57 SkyScan query 11:30:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:30:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:30:57 Message to Master queued w/err=0: serial=122379 error=0 11:31:02 Received message from Master: op=Filter serial=122380 11:31:02 Color wheel filter change from 0 to 0 11:31:02 FLIGetFilterPos err=0 currentPosition=0 11:31:02 FLIGetStepsRemaining err=0 RemainingSteps=0 11:31:02 Filter is already there-color wheel unchanged 11:31:03 Received message from Master: op=Shutter serial=122381 11:31:03 Shutter LASER open 11:31:03 Received message from Camera: op=State serial=122383 11:31:03 GetSingleValue result=40 Value=cccccccc 11:31:03 SkyScan query 11:31:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:31:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:03 Parameters OK 11:31:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:03 Set A/D data flow result=40 11:31:03 Set A/D channel type result=40 11:31:03 Set A/D encoding result=40 11:31:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:03 Set channel filter=0.000000e+000 result=40 11:31:03 Config A/D Result=40 11:31:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:03 Get A/D filter: -9.255963e+061 result=40 11:31:03 Get A/D value=-858993460 result=40 11:31:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:03 Parameters OK 11:31:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:03 Set A/D data flow result=40 11:31:03 Set A/D channel type result=40 11:31:03 Set A/D encoding result=40 11:31:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:03 Set channel filter=0.000000e+000 result=40 11:31:03 Config A/D Result=40 11:31:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:03 Get A/D filter: -9.255963e+061 result=40 11:31:03 Get A/D value=-858993460 result=40 11:31:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:31:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:31:03 Aux= 11:31:03 Message to Camera, serial 122383 queued 11:31:12 Received message from Master: op=Shutter serial=122393 11:31:12 Shutter LASER close 11:31:12 Received message from Master: op=PointingHead serial=122397 11:31:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:31:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:31:13 Point started: ret=0 11:31:13 point_skyscan result=0 11:31:13 Check angles 11:31:13 SkyScan query 11:31:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 11:31:14 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 11:31:14 Check angles 11:31:14 SkyScan query 11:31:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.415<-20161 Statuses=0008 0009 11:31:15 Msec=750 True Az=112.995 Ze=-122.415 Az status=0008 Ze status=0009 11:31:15 Check angles 11:31:15 SkyScan query 11:31:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.55<-18770 Statuses=0008 0009 11:31:15 Msec=1500 True Az=112.995 Ze=-101.55 Az status=0008 Ze status=0009 11:31:16 Check angles 11:31:16 SkyScan query 11:31:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 11:31:16 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 11:31:16 Check angles 11:31:16 SkyScan query 11:31:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 11:31:17 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 11:31:17 Check angles 11:31:17 SkyScan query 11:31:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.16<-14544 Statuses=0008 0009 11:31:18 Msec=3750 True Az=112.995 Ze=-38.16 Az status=0008 Ze status=0009 11:31:18 Check angles 11:31:18 SkyScan query 11:31:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.785<-13119 Statuses=0008 0009 11:31:19 Msec=4500 True Az=112.995 Ze=-16.785 Az status=0008 Ze status=0009 11:31:19 Check angles 11:31:19 SkyScan query 11:31:19 SkyScan query done: ret=0 az=112.995<-7533 ze=4.44<-11704 Statuses=0008 0009 11:31:19 Msec=5250 True Az=112.995 Ze=4.44 Az status=0008 Ze status=0009 11:31:19 Check angles 11:31:19 SkyScan query 11:31:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:31:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:31:20 Message to Master queued w/err=0: serial=122397 error=0 11:31:25 Received message from Master: op=Filter serial=122398 11:31:25 Color wheel filter change from 0 to 0 11:31:25 FLIGetFilterPos err=0 currentPosition=0 11:31:25 FLIGetStepsRemaining err=0 RemainingSteps=0 11:31:25 Filter is already there-color wheel unchanged 11:31:25 Received message from Master: op=Shutter serial=122399 11:31:25 Shutter LASER close 11:31:25 Received message from Camera: op=State serial=122401 11:31:25 GetSingleValue result=40 Value=cccccccc 11:31:25 SkyScan query 11:31:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:31:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:26 Parameters OK 11:31:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:26 Set A/D data flow result=40 11:31:26 Set A/D channel type result=40 11:31:26 Set A/D encoding result=40 11:31:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:26 Set channel filter=0.000000e+000 result=40 11:31:26 Config A/D Result=40 11:31:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:26 Get A/D filter: -9.255963e+061 result=40 11:31:26 Get A/D value=-858993460 result=40 11:31:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:26 Parameters OK 11:31:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:26 Set A/D data flow result=40 11:31:26 Set A/D channel type result=40 11:31:26 Set A/D encoding result=40 11:31:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:26 Set channel filter=0.000000e+000 result=40 11:31:26 Config A/D Result=40 11:31:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:26 Get A/D filter: -9.255963e+061 result=40 11:31:26 Get A/D value=-858993460 result=40 11:31:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:31:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:31:26 Aux= 11:31:26 Message to Camera, serial 122401 queued 11:32:03 Received message from Master: op=PointingHead serial=122414 11:32:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:32:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:32:03 Point started: ret=0 11:32:03 point_skyscan result=0 11:32:04 Check angles 11:32:04 SkyScan query 11:32:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:32:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:32:04 Message to Master queued w/err=0: serial=122414 error=0 11:32:09 Received message from Master: op=Filter serial=122415 11:32:09 Color wheel filter change from 0 to 0 11:32:09 FLIGetFilterPos err=0 currentPosition=0 11:32:09 FLIGetStepsRemaining err=0 RemainingSteps=0 11:32:09 Filter is already there-color wheel unchanged 11:32:10 Received message from Master: op=Shutter serial=122416 11:32:10 Shutter LASER close 11:32:10 Received message from Camera: op=State serial=122418 11:32:10 GetSingleValue result=40 Value=cccccccc 11:32:10 SkyScan query 11:32:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:32:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:10 Parameters OK 11:32:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:10 Set A/D data flow result=40 11:32:10 Set A/D channel type result=40 11:32:10 Set A/D encoding result=40 11:32:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:10 Set channel filter=0.000000e+000 result=40 11:32:10 Config A/D Result=40 11:32:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:10 Get A/D filter: -9.255963e+061 result=40 11:32:10 Get A/D value=-858993460 result=40 11:32:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:10 Parameters OK 11:32:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:10 Set A/D data flow result=40 11:32:10 Set A/D channel type result=40 11:32:10 Set A/D encoding result=40 11:32:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:10 Set channel filter=0.000000e+000 result=40 11:32:10 Config A/D Result=40 11:32:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:10 Get A/D filter: -9.255963e+061 result=40 11:32:10 Get A/D value=-858993460 result=40 11:32:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:32:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:32:10 Aux= 11:32:10 Message to Camera, serial 122418 queued 11:32:47 Received message from Master: op=PointingHead serial=122431 11:32:47 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:32:47 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:32:48 Point started: ret=0 11:32:48 point_skyscan result=0 11:32:48 Check angles 11:32:48 SkyScan query 11:32:49 SkyScan query done: ret=0 az=135.99<-9066 ze=-6.51<-12434 Statuses=0009 0008 11:32:49 Msec=0 True Az=135.99 Ze=-6.51 Az status=0009 Ze status=0008 11:32:49 Check angles 11:32:49 SkyScan query 11:32:50 SkyScan query done: ret=0 az=153.48<-10232 ze=-6.495<-12433 Statuses=0009 0008 11:32:50 Msec=750 True Az=153.48 Ze=-6.495 Az status=0009 Ze status=0008 11:32:50 Check angles 11:32:50 SkyScan query 11:32:50 SkyScan query done: ret=0 az=171.36<-11424 ze=-6.495<-12433 Statuses=0009 0008 11:32:50 Msec=1500 True Az=171.36 Ze=-6.495 Az status=0009 Ze status=0008 11:32:51 Check angles 11:32:51 SkyScan query 11:32:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:32:51 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:32:51 Message to Master queued w/err=0: serial=122431 error=0 11:32:56 Received message from Master: op=Filter serial=122432 11:32:56 Color wheel filter change from 0 to 0 11:32:56 FLIGetFilterPos err=0 currentPosition=0 11:32:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:32:56 Filter is already there-color wheel unchanged 11:32:56 Received message from Master: op=Shutter serial=122433 11:32:56 Shutter LASER close 11:32:56 Received message from Camera: op=State serial=122435 11:32:56 GetSingleValue result=40 Value=cccccccc 11:32:56 SkyScan query 11:32:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:32:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:57 Parameters OK 11:32:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:57 Set A/D data flow result=40 11:32:57 Set A/D channel type result=40 11:32:57 Set A/D encoding result=40 11:32:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:57 Set channel filter=0.000000e+000 result=40 11:32:57 Config A/D Result=40 11:32:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:57 Get A/D filter: -9.255963e+061 result=40 11:32:57 Get A/D value=-858993460 result=40 11:32:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:57 Parameters OK 11:32:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:57 Set A/D data flow result=40 11:32:57 Set A/D channel type result=40 11:32:57 Set A/D encoding result=40 11:32:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:57 Set channel filter=0.000000e+000 result=40 11:32:57 Config A/D Result=40 11:32:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:57 Get A/D filter: -9.255963e+061 result=40 11:32:57 Get A/D value=-858993460 result=40 11:32:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:32:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:32:57 Aux= 11:32:57 Message to Camera, serial 122435 queued 11:33:34 Received message from Master: op=PointingHead serial=122448 11:33:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:33:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:33:34 Point started: ret=0 11:33:34 point_skyscan result=0 11:33:35 Check angles 11:33:35 SkyScan query 11:33:35 SkyScan query done: ret=0 az=152.835<-10189 ze=6.51<-11566 Statuses=0009 0008 11:33:35 Msec=0 True Az=152.835 Ze=6.51 Az status=0009 Ze status=0008 11:33:36 Check angles 11:33:36 SkyScan query 11:33:36 SkyScan query done: ret=0 az=135.075<-9005 ze=6.495<-11567 Statuses=0009 0008 11:33:36 Msec=750 True Az=135.075 Ze=6.495 Az status=0009 Ze status=0008 11:33:36 Check angles 11:33:36 SkyScan query 11:33:37 SkyScan query done: ret=0 az=117.675<-7845 ze=6.495<-11567 Statuses=0009 0008 11:33:37 Msec=1500 True Az=117.675 Ze=6.495 Az status=0009 Ze status=0008 11:33:37 Check angles 11:33:37 SkyScan query 11:33:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:33:38 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:33:38 Message to Master queued w/err=0: serial=122448 error=0 11:33:38 Received message from Master: op=Identify serial=122449 11:33:43 Received message from Master: op=Filter serial=122452 11:33:43 Color wheel filter change from 0 to 0 11:33:43 FLIGetFilterPos err=0 currentPosition=0 11:33:43 FLIGetStepsRemaining err=0 RemainingSteps=0 11:33:43 Filter is already there-color wheel unchanged 11:33:43 Received message from Master: op=Shutter serial=122453 11:33:43 Shutter LASER close 11:33:43 Received message from Camera: op=State serial=122455 11:33:43 GetSingleValue result=40 Value=cccccccc 11:33:43 SkyScan query 11:33:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:33:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:43 Parameters OK 11:33:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:43 Set A/D data flow result=40 11:33:43 Set A/D channel type result=40 11:33:43 Set A/D encoding result=40 11:33:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:43 Set channel filter=0.000000e+000 result=40 11:33:43 Config A/D Result=40 11:33:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:43 Get A/D filter: -9.255963e+061 result=40 11:33:43 Get A/D value=-858993460 result=40 11:33:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:43 Parameters OK 11:33:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:43 Set A/D data flow result=40 [UTC 2019-3-5 11:33:43] 11:33:43 Set A/D channel type result=40 11:33:44 Set A/D encoding result=40 11:33:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:44 Set channel filter=0.000000e+000 result=40 11:33:44 Config A/D Result=40 11:33:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:44 Get A/D filter: -9.255963e+061 result=40 11:33:44 Get A/D value=-858993460 result=40 11:33:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:33:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:33:44 Aux= 11:33:44 Message to Camera, serial 122455 queued 11:34:20 Received message from Master: op=PointingHead serial=122468 11:34:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:34:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:34:21 Point started: ret=0 11:34:21 point_skyscan result=0 11:34:22 Check angles 11:34:22 SkyScan query 11:34:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 11:34:22 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 11:34:22 Check angles 11:34:22 SkyScan query 11:34:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 11:34:23 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 11:34:23 Check angles 11:34:23 SkyScan query 11:34:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.04<-16336 Statuses=0008 0009 11:34:24 Msec=1500 True Az=112.995 Ze=-65.04 Az status=0008 Ze status=0009 11:34:24 Check angles 11:34:24 SkyScan query 11:34:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.385<-17759 Statuses=0008 0009 11:34:24 Msec=2250 True Az=112.995 Ze=-86.385 Az status=0008 Ze status=0009 11:34:25 Check angles 11:34:25 SkyScan query 11:34:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.34<-19156 Statuses=0008 0009 11:34:25 Msec=3000 True Az=112.995 Ze=-107.34 Az status=0008 Ze status=0009 11:34:25 Check angles 11:34:25 SkyScan query 11:34:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.31<-20554 Statuses=0008 0009 11:34:26 Msec=3750 True Az=112.995 Ze=-128.31 Az status=0008 Ze status=0009 11:34:26 Check angles 11:34:26 SkyScan query 11:34:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.76<-21984 Statuses=0008 0009 11:34:27 Msec=4500 True Az=112.995 Ze=-149.76 Az status=0008 Ze status=0009 11:34:27 Check angles 11:34:27 SkyScan query 11:34:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.685<-23379 Statuses=0008 0009 11:34:27 Msec=5250 True Az=112.995 Ze=-170.685 Az status=0008 Ze status=0009 11:34:28 Check angles 11:34:28 SkyScan query 11:34:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:34:28 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:34:28 Message to Master queued w/err=0: serial=122468 error=0 11:34:33 Received message from Master: op=Filter serial=122469 11:34:33 Color wheel filter change from 0 to 0 11:34:33 FLIGetFilterPos err=0 currentPosition=0 11:34:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:34:33 Filter is already there-color wheel unchanged 11:34:33 Received message from Master: op=Shutter serial=122470 11:34:33 Shutter LASER open 11:34:33 Received message from Camera: op=State serial=122472 11:34:33 GetSingleValue result=40 Value=cccccccc 11:34:33 SkyScan query 11:34:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:34:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:34 Parameters OK 11:34:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:34 Set A/D data flow result=40 11:34:34 Set A/D channel type result=40 11:34:34 Set A/D encoding result=40 11:34:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:34 Set channel filter=0.000000e+000 result=40 11:34:34 Config A/D Result=40 11:34:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:34 Get A/D filter: -9.255963e+061 result=40 11:34:34 Get A/D value=-858993460 result=40 11:34:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:34 Parameters OK 11:34:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:34 Set A/D data flow result=40 11:34:34 Set A/D channel type result=40 11:34:34 Set A/D encoding result=40 11:34:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:34 Set channel filter=0.000000e+000 result=40 11:34:34 Config A/D Result=40 11:34:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:34 Get A/D filter: -9.255963e+061 result=40 11:34:34 Get A/D value=-858993460 result=40 11:34:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:34:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:34:34 Aux= 11:34:34 Message to Camera, serial 122472 queued 11:34:42 Received message from Master: op=Shutter serial=122482 11:34:42 Shutter LASER close 11:34:43 Received message from Master: op=PointingHead serial=122486 11:34:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:34:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:34:43 Point started: ret=0 11:34:43 point_skyscan result=0 11:34:44 Check angles 11:34:44 SkyScan query 11:34:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 11:34:45 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 11:34:45 Check angles 11:34:45 SkyScan query 11:34:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.58<-20172 Statuses=0008 0009 11:34:45 Msec=750 True Az=112.995 Ze=-122.58 Az status=0008 Ze status=0009 11:34:46 Check angles 11:34:46 SkyScan query 11:34:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.625<-18775 Statuses=0008 0009 11:34:46 Msec=1500 True Az=112.995 Ze=-101.625 Az status=0008 Ze status=0009 11:34:46 Check angles 11:34:46 SkyScan query 11:34:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.655<-17377 Statuses=0008 0009 11:34:47 Msec=2250 True Az=112.995 Ze=-80.655 Az status=0008 Ze status=0009 11:34:47 Check angles 11:34:47 SkyScan query 11:34:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.715<-15981 Statuses=0008 0009 11:34:48 Msec=3000 True Az=112.995 Ze=-59.715 Az status=0008 Ze status=0009 11:34:48 Check angles 11:34:48 SkyScan query 11:34:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.25<-14550 Statuses=0008 0009 11:34:48 Msec=3750 True Az=112.995 Ze=-38.25 Az status=0008 Ze status=0009 11:34:49 Check angles 11:34:49 SkyScan query 11:34:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.83<-13122 Statuses=0008 0009 11:34:49 Msec=4500 True Az=112.995 Ze=-16.83 Az status=0008 Ze status=0009 11:34:49 Check angles 11:34:49 SkyScan query 11:34:50 SkyScan query done: ret=0 az=113.01<-7534 ze=4.41<-11706 Statuses=0008 0009 11:34:50 Msec=5250 True Az=113.01 Ze=4.41 Az status=0008 Ze status=0009 11:34:50 Check angles 11:34:50 SkyScan query 11:34:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:34:51 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:34:51 Message to Master queued w/err=0: serial=122486 error=0 11:34:56 Received message from Master: op=Filter serial=122487 11:34:56 Color wheel filter change from 0 to 0 11:34:56 FLIGetFilterPos err=0 currentPosition=0 11:34:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:34:56 Filter is already there-color wheel unchanged 11:34:56 Received message from Master: op=Shutter serial=122488 11:34:56 Shutter LASER close 11:34:56 Received message from Camera: op=State serial=122490 11:34:56 GetSingleValue result=40 Value=cccccccc 11:34:56 SkyScan query 11:34:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:34:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:57 Parameters OK 11:34:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:57 Set A/D data flow result=40 11:34:57 Set A/D channel type result=40 11:34:57 Set A/D encoding result=40 11:34:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:57 Set channel filter=0.000000e+000 result=40 11:34:57 Config A/D Result=40 11:34:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:57 Get A/D filter: -9.255963e+061 result=40 11:34:57 Get A/D value=-858993460 result=40 11:34:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:57 Parameters OK 11:34:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:57 Set A/D data flow result=40 11:34:57 Set A/D channel type result=40 11:34:57 Set A/D encoding result=40 11:34:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:57 Set channel filter=0.000000e+000 result=40 11:34:57 Config A/D Result=40 11:34:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:57 Get A/D filter: -9.255963e+061 result=40 11:34:57 Get A/D value=-858993460 result=40 11:34:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:34:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:34:57 Aux= 11:34:57 Message to Camera, serial 122490 queued 11:35:33 Received message from Master: op=PointingHead serial=122503 11:35:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:35:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:35:34 Point started: ret=0 11:35:34 point_skyscan result=0 11:35:35 Check angles 11:35:35 SkyScan query 11:35:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:35:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:35:35 Message to Master queued w/err=0: serial=122503 error=0 11:35:40 Received message from Master: op=Filter serial=122504 11:35:40 Color wheel filter change from 0 to 0 11:35:40 FLIGetFilterPos err=0 currentPosition=0 11:35:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:35:40 Filter is already there-color wheel unchanged 11:35:40 Received message from Master: op=Shutter serial=122505 11:35:40 Shutter LASER close 11:35:40 Received message from Camera: op=State serial=122507 11:35:40 GetSingleValue result=40 Value=cccccccc 11:35:40 SkyScan query 11:35:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:35:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:41 Parameters OK 11:35:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:41 Set A/D data flow result=40 11:35:41 Set A/D channel type result=40 11:35:41 Set A/D encoding result=40 11:35:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:41 Set channel filter=0.000000e+000 result=40 11:35:41 Config A/D Result=40 11:35:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:41 Get A/D filter: -9.255963e+061 result=40 11:35:41 Get A/D value=-858993460 result=40 11:35:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:41 Parameters OK 11:35:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:41 Set A/D data flow result=40 11:35:41 Set A/D channel type result=40 11:35:41 Set A/D encoding result=40 11:35:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:41 Set channel filter=0.000000e+000 result=40 11:35:41 Config A/D Result=40 11:35:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:41 Get A/D filter: -9.255963e+061 result=40 11:35:41 Get A/D value=-858993460 result=40 11:35:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:35:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:35:41 Aux= 11:35:41 Message to Camera, serial 122507 queued 11:36:18 Received message from Master: op=PointingHead serial=122520 11:36:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:36:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:36:18 Point started: ret=0 11:36:18 point_skyscan result=0 11:36:19 Check angles 11:36:19 SkyScan query 11:36:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:36:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:36:19 Message to Master queued w/err=0: serial=122520 error=0 11:36:24 Received message from Master: op=Filter serial=122521 11:36:24 Color wheel filter change from 0 to 0 11:36:24 FLIGetFilterPos err=0 currentPosition=0 11:36:24 FLIGetStepsRemaining err=0 RemainingSteps=0 11:36:24 Filter is already there-color wheel unchanged 11:36:25 Received message from Master: op=Shutter serial=122522 11:36:25 Shutter LASER close 11:36:25 Received message from Camera: op=State serial=122524 11:36:25 GetSingleValue result=40 Value=cccccccc 11:36:25 SkyScan query 11:36:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:36:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:25 Parameters OK 11:36:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:25 Set A/D data flow result=40 11:36:25 Set A/D channel type result=40 11:36:25 Set A/D encoding result=40 11:36:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:25 Set channel filter=0.000000e+000 result=40 11:36:25 Config A/D Result=40 11:36:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:25 Get A/D filter: -9.255963e+061 result=40 11:36:25 Get A/D value=-858993460 result=40 11:36:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:25 Parameters OK 11:36:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:25 Set A/D data flow result=40 11:36:25 Set A/D channel type result=40 11:36:25 Set A/D encoding result=40 11:36:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:25 Set channel filter=0.000000e+000 result=40 11:36:25 Config A/D Result=40 11:36:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:25 Get A/D filter: -9.255963e+061 result=40 11:36:25 Get A/D value=-858993460 result=40 11:36:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:36:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:36:25 Aux= 11:36:25 Message to Camera, serial 122524 queued 11:37:02 Received message from Master: op=PointingHead serial=122537 11:37:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:37:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:37:02 Point started: ret=0 11:37:02 point_skyscan result=0 11:37:03 Check angles 11:37:03 SkyScan query 11:37:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:37:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:37:04 Message to Master queued w/err=0: serial=122537 error=0 11:37:09 Received message from Master: op=Filter serial=122538 11:37:09 Color wheel filter change from 0 to 0 11:37:09 FLIGetFilterPos err=0 currentPosition=0 11:37:09 FLIGetStepsRemaining err=0 RemainingSteps=0 11:37:09 Filter is already there-color wheel unchanged 11:37:09 Received message from Master: op=Shutter serial=122539 11:37:09 Shutter LASER close 11:37:09 Received message from Camera: op=State serial=122541 11:37:09 GetSingleValue result=40 Value=cccccccc 11:37:09 SkyScan query 11:37:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:37:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:09 Parameters OK 11:37:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:09 Set A/D data flow result=40 11:37:09 Set A/D channel type result=40 11:37:09 Set A/D encoding result=40 11:37:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:09 Set channel filter=0.000000e+000 result=40 11:37:09 Config A/D Result=40 11:37:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:09 Get A/D filter: -9.255963e+061 result=40 11:37:09 Get A/D value=-858993460 result=40 11:37:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:09 Parameters OK 11:37:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:09 Set A/D data flow result=40 11:37:09 Set A/D channel type result=40 11:37:09 Set A/D encoding result=40 11:37:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:09 Set channel filter=0.000000e+000 result=40 11:37:09 Config A/D Result=40 11:37:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:09 Get A/D filter: -9.255963e+061 result=40 11:37:09 Get A/D value=-858993460 result=40 11:37:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:37:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:37:09 Aux= 11:37:09 Message to Camera, serial 122541 queued 11:37:46 Received message from Master: op=PointingHead serial=122554 11:37:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:37:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:37:47 Point started: ret=0 11:37:47 point_skyscan result=0 11:37:47 Check angles 11:37:47 SkyScan query 11:37:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.655<-13577 Statuses=0008 0009 11:37:48 Msec=0 True Az=112.995 Ze=-23.655 Az status=0008 Ze status=0009 11:37:48 Check angles 11:37:48 SkyScan query 11:37:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 11:37:49 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 11:37:49 Check angles 11:37:49 SkyScan query 11:37:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-66<-16400 Statuses=0008 0009 11:37:50 Msec=1500 True Az=112.995 Ze=-66 Az status=0008 Ze status=0009 11:37:50 Check angles 11:37:50 SkyScan query 11:37:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.97<-17798 Statuses=0008 0009 11:37:50 Msec=2250 True Az=112.995 Ze=-86.97 Az status=0008 Ze status=0009 11:37:50 Check angles 11:37:50 SkyScan query 11:37:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.955<-19197 Statuses=0008 0009 11:37:51 Msec=3000 True Az=112.995 Ze=-107.955 Az status=0008 Ze status=0009 11:37:51 Check angles 11:37:51 SkyScan query 11:37:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.33<-20622 Statuses=0008 0009 11:37:52 Msec=3750 True Az=112.995 Ze=-129.33 Az status=0008 Ze status=0009 11:37:52 Check angles 11:37:52 SkyScan query 11:37:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.27<-22018 Statuses=0008 0009 11:37:53 Msec=4500 True Az=112.995 Ze=-150.27 Az status=0008 Ze status=0009 11:37:53 Check angles 11:37:53 SkyScan query 11:37:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.06<-23404 Statuses=0008 0009 11:37:53 Msec=5250 True Az=112.995 Ze=-171.06 Az status=0008 Ze status=0009 11:37:53 Check angles 11:37:53 SkyScan query 11:37:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:37:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:37:54 Message to Master queued w/err=0: serial=122554 error=0 11:37:59 Received message from Master: op=Filter serial=122555 11:37:59 Color wheel filter change from 0 to 0 11:37:59 FLIGetFilterPos err=0 currentPosition=0 11:37:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:37:59 Filter is already there-color wheel unchanged 11:37:59 Received message from Master: op=Shutter serial=122556 11:37:59 Shutter LASER open 11:37:59 Received message from Camera: op=State serial=122558 11:37:59 GetSingleValue result=40 Value=cccccccc 11:37:59 SkyScan query 11:38:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:38:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:00 Parameters OK 11:38:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:00 Set A/D data flow result=40 11:38:00 Set A/D channel type result=40 11:38:00 Set A/D encoding result=40 11:38:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:00 Set channel filter=0.000000e+000 result=40 11:38:00 Config A/D Result=40 11:38:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:00 Get A/D filter: -9.255963e+061 result=40 11:38:00 Get A/D value=-858993460 result=40 11:38:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:00 Parameters OK 11:38:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:00 Set A/D data flow result=40 11:38:00 Set A/D channel type result=40 11:38:00 Set A/D encoding result=40 11:38:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:00 Set channel filter=0.000000e+000 result=40 11:38:00 Config A/D Result=40 11:38:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:00 Get A/D filter: -9.255963e+061 result=40 11:38:00 Get A/D value=-858993460 result=40 11:38:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:38:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:38:00 Aux= 11:38:00 Message to Camera, serial 122558 queued 11:38:08 Received message from Master: op=Shutter serial=122568 11:38:08 Shutter LASER close 11:38:09 Received message from Master: op=PointingHead serial=122572 11:38:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:38:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:38:09 Point started: ret=0 11:38:09 point_skyscan result=0 11:38:10 Check angles 11:38:10 SkyScan query 11:38:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 11:38:11 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 11:38:11 Check angles 11:38:11 SkyScan query 11:38:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.25<-20150 Statuses=0008 0009 11:38:11 Msec=750 True Az=112.995 Ze=-122.25 Az status=0008 Ze status=0009 11:38:12 Check angles 11:38:12 SkyScan query 11:38:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.325<-18755 Statuses=0008 0009 11:38:12 Msec=1500 True Az=112.995 Ze=-101.325 Az status=0008 Ze status=0009 11:38:12 Check angles 11:38:12 SkyScan query 11:38:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.34<-17356 Statuses=0008 0009 11:38:13 Msec=2250 True Az=112.995 Ze=-80.34 Az status=0008 Ze status=0009 11:38:13 Check angles 11:38:13 SkyScan query 11:38:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.92<-15928 Statuses=0008 0009 11:38:14 Msec=3000 True Az=112.995 Ze=-58.92 Az status=0008 Ze status=0009 11:38:14 Check angles 11:38:14 SkyScan query 11:38:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.905<-14527 Statuses=0008 0009 11:38:14 Msec=3750 True Az=112.995 Ze=-37.905 Az status=0008 Ze status=0009 11:38:15 Check angles 11:38:15 SkyScan query 11:38:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.965<-13131 Statuses=0008 0009 11:38:15 Msec=4500 True Az=112.995 Ze=-16.965 Az status=0008 Ze status=0009 11:38:15 Check angles 11:38:15 SkyScan query 11:38:16 SkyScan query done: ret=0 az=113.01<-7534 ze=4.32<-11712 Statuses=0008 0009 11:38:16 Msec=5250 True Az=113.01 Ze=4.32 Az status=0008 Ze status=0009 11:38:16 Check angles 11:38:16 SkyScan query 11:38:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:38:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:38:17 Message to Master queued w/err=0: serial=122572 error=0 11:38:22 Received message from Master: op=Filter serial=122573 11:38:22 Color wheel filter change from 0 to 0 11:38:22 FLIGetFilterPos err=0 currentPosition=0 11:38:22 FLIGetStepsRemaining err=0 RemainingSteps=0 11:38:22 Filter is already there-color wheel unchanged 11:38:22 Received message from Master: op=Shutter serial=122574 11:38:22 Shutter LASER close 11:38:22 Received message from Camera: op=State serial=122576 11:38:22 GetSingleValue result=40 Value=cccccccc 11:38:22 SkyScan query 11:38:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:38:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:23 Parameters OK 11:38:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:23 Set A/D data flow result=40 11:38:23 Set A/D channel type result=40 11:38:23 Set A/D encoding result=40 11:38:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:23 Set channel filter=0.000000e+000 result=40 11:38:23 Config A/D Result=40 11:38:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:23 Get A/D filter: -9.255963e+061 result=40 11:38:23 Get A/D value=-858993460 result=40 11:38:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:23 Parameters OK 11:38:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:23 Set A/D data flow result=40 11:38:23 Set A/D channel type result=40 11:38:23 Set A/D encoding result=40 11:38:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:23 Set channel filter=0.000000e+000 result=40 11:38:23 Config A/D Result=40 11:38:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:23 Get A/D filter: -9.255963e+061 result=40 11:38:23 Get A/D value=-858993460 result=40 11:38:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:38:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:38:23 Aux= 11:38:23 Message to Camera, serial 122576 queued 11:39:00 Received message from Master: op=PointingHead serial=122589 11:39:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:39:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:39:00 Point started: ret=0 11:39:00 point_skyscan result=0 11:39:01 Check angles 11:39:01 SkyScan query 11:39:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:39:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:39:01 Message to Master queued w/err=0: serial=122589 error=0 11:39:06 Received message from Master: op=Filter serial=122590 11:39:06 Color wheel filter change from 0 to 0 11:39:06 FLIGetFilterPos err=0 currentPosition=0 11:39:06 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:06 Filter is already there-color wheel unchanged 11:39:06 Received message from Master: op=Shutter serial=122591 11:39:06 Shutter LASER close 11:39:06 Received message from Camera: op=State serial=122593 11:39:06 GetSingleValue result=40 Value=cccccccc 11:39:06 SkyScan query 11:39:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:39:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:07 Parameters OK 11:39:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:07 Set A/D data flow result=40 11:39:07 Set A/D channel type result=40 11:39:07 Set A/D encoding result=40 11:39:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:07 Set channel filter=0.000000e+000 result=40 11:39:07 Config A/D Result=40 11:39:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:07 Get A/D filter: -9.255963e+061 result=40 11:39:07 Get A/D value=-858993460 result=40 11:39:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:07 Parameters OK 11:39:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:07 Set A/D data flow result=40 11:39:07 Set A/D channel type result=40 11:39:07 Set A/D encoding result=40 11:39:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:07 Set channel filter=0.000000e+000 result=40 11:39:07 Config A/D Result=40 11:39:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:07 Get A/D filter: -9.255963e+061 result=40 11:39:07 Get A/D value=-858993460 result=40 11:39:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:07 Aux= 11:39:07 Message to Camera, serial 122593 queued 11:39:44 Received message from Master: op=PointingHead serial=122606 11:39:44 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:39:44 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:39:44 Point started: ret=0 11:39:44 point_skyscan result=0 11:39:45 Check angles 11:39:45 SkyScan query 11:39:46 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 11:39:46 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 11:39:46 Check angles 11:39:46 SkyScan query 11:39:46 SkyScan query done: ret=0 az=153.78<-10252 ze=-6.495<-12433 Statuses=0009 0008 11:39:46 Msec=750 True Az=153.78 Ze=-6.495 Az status=0009 Ze status=0008 11:39:46 Check angles 11:39:46 SkyScan query 11:39:47 SkyScan query done: ret=0 az=171.21<-11414 ze=-6.495<-12433 Statuses=0009 0008 11:39:47 Msec=1500 True Az=171.21 Ze=-6.495 Az status=0009 Ze status=0008 11:39:47 Check angles 11:39:47 SkyScan query 11:39:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:39:48 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:39:48 Message to Master queued w/err=0: serial=122606 error=0 11:39:53 Received message from Master: op=Filter serial=122607 11:39:53 Color wheel filter change from 0 to 0 11:39:53 FLIGetFilterPos err=0 currentPosition=0 11:39:53 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:53 Filter is already there-color wheel unchanged 11:39:53 Received message from Master: op=Shutter serial=122608 11:39:53 Shutter LASER close 11:39:53 Received message from Camera: op=State serial=122610 11:39:53 GetSingleValue result=40 Value=cccccccc 11:39:53 SkyScan query 11:39:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:39:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:54 Parameters OK 11:39:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:54 Set A/D data flow result=40 11:39:54 Set A/D channel type result=40 11:39:54 Set A/D encoding result=40 11:39:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:54 Set channel filter=0.000000e+000 result=40 11:39:54 Config A/D Result=40 11:39:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:54 Get A/D filter: -9.255963e+061 result=40 11:39:54 Get A/D value=-858993460 result=40 11:39:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:54 Parameters OK 11:39:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:54 Set A/D data flow result=40 11:39:54 Set A/D channel type result=40 11:39:54 Set A/D encoding result=40 11:39:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:54 Set channel filter=0.000000e+000 result=40 11:39:54 Config A/D Result=40 11:39:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:54 Get A/D filter: -9.255963e+061 result=40 11:39:54 Get A/D value=-858993460 result=40 11:39:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:54 Aux= 11:39:54 Message to Camera, serial 122610 queued 11:40:30 Received message from Master: op=PointingHead serial=122623 11:40:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:40:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:40:31 Point started: ret=0 11:40:31 point_skyscan result=0 11:40:32 Check angles 11:40:32 SkyScan query 11:40:32 SkyScan query done: ret=0 az=153.3<-10220 ze=6.51<-11566 Statuses=0009 0008 11:40:32 Msec=0 True Az=153.3 Ze=6.51 Az status=0009 Ze status=0008 11:40:32 Check angles 11:40:32 SkyScan query 11:40:33 SkyScan query done: ret=0 az=135.78<-9052 ze=6.495<-11567 Statuses=0009 0008 11:40:33 Msec=750 True Az=135.78 Ze=6.495 Az status=0009 Ze status=0008 11:40:33 Check angles 11:40:33 SkyScan query 11:40:34 SkyScan query done: ret=0 az=117.9<-7860 ze=6.495<-11567 Statuses=0009 0008 11:40:34 Msec=1500 True Az=117.9 Ze=6.495 Az status=0009 Ze status=0008 11:40:34 Check angles 11:40:34 SkyScan query 11:40:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:40:34 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:40:34 Message to Master queued w/err=0: serial=122623 error=0 11:40:39 Received message from Master: op=Filter serial=122624 11:40:39 Color wheel filter change from 0 to 0 11:40:39 FLIGetFilterPos err=0 currentPosition=0 11:40:39 FLIGetStepsRemaining err=0 RemainingSteps=0 11:40:39 Filter is already there-color wheel unchanged 11:40:40 Received message from Master: op=Shutter serial=122625 11:40:40 Shutter LASER close 11:40:40 Received message from Camera: op=State serial=122627 11:40:40 GetSingleValue result=40 Value=cccccccc 11:40:40 SkyScan query 11:40:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:40:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:40 Parameters OK 11:40:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:40 Set A/D data flow result=40 11:40:40 Set A/D channel type result=40 11:40:40 Set A/D encoding result=40 11:40:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:40 Set channel filter=0.000000e+000 result=40 11:40:40 Config A/D Result=40 11:40:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:40 Get A/D filter: -9.255963e+061 result=40 11:40:40 Get A/D value=-858993460 result=40 11:40:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:40 Parameters OK 11:40:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:40 Set A/D data flow result=40 11:40:40 Set A/D channel type result=40 11:40:40 Set A/D encoding result=40 11:40:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:40 Set channel filter=0.000000e+000 result=40 11:40:40 Config A/D Result=40 11:40:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:40 Get A/D filter: -9.255963e+061 result=40 11:40:40 Get A/D value=-858993460 result=40 11:40:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:40:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:40:40 Aux= 11:40:40 Message to Camera, serial 122627 queued 11:41:17 Received message from Master: op=PointingHead serial=122640 11:41:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:41:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:41:17 Point started: ret=0 11:41:17 point_skyscan result=0 11:41:18 Check angles 11:41:18 SkyScan query 11:41:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 11:41:19 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 11:41:19 Check angles 11:41:19 SkyScan query 11:41:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 11:41:19 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 11:41:20 Check angles 11:41:20 SkyScan query 11:41:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.985<-16399 Statuses=0008 0009 11:41:20 Msec=1500 True Az=112.995 Ze=-65.985 Az status=0008 Ze status=0009 11:41:20 Check angles 11:41:20 SkyScan query 11:41:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.955<-17797 Statuses=0008 0009 11:41:21 Msec=2250 True Az=112.995 Ze=-86.955 Az status=0008 Ze status=0009 11:41:21 Check angles 11:41:21 SkyScan query 11:41:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.94<-19196 Statuses=0008 0009 11:41:22 Msec=3000 True Az=112.995 Ze=-107.94 Az status=0008 Ze status=0009 11:41:22 Check angles 11:41:22 SkyScan query 11:41:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.315<-20621 Statuses=0008 0009 11:41:22 Msec=3750 True Az=112.995 Ze=-129.315 Az status=0008 Ze status=0009 11:41:23 Check angles 11:41:23 SkyScan query 11:41:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.24<-22016 Statuses=0008 0009 11:41:23 Msec=4500 True Az=112.995 Ze=-150.24 Az status=0008 Ze status=0009 11:41:23 Check angles 11:41:23 SkyScan query 11:41:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.045<-23403 Statuses=0008 0009 11:41:24 Msec=5250 True Az=112.995 Ze=-171.045 Az status=0008 Ze status=0009 11:41:24 Check angles 11:41:24 SkyScan query 11:41:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:41:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:41:25 Message to Master queued w/err=0: serial=122640 error=0 11:41:30 Received message from Master: op=Filter serial=122641 11:41:30 Color wheel filter change from 0 to 0 11:41:30 FLIGetFilterPos err=0 currentPosition=0 11:41:30 FLIGetStepsRemaining err=0 RemainingSteps=0 11:41:30 Filter is already there-color wheel unchanged 11:41:30 Received message from Master: op=Shutter serial=122642 11:41:30 Shutter LASER open 11:41:30 Received message from Camera: op=State serial=122644 11:41:30 GetSingleValue result=40 Value=cccccccc 11:41:30 SkyScan query 11:41:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:41:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:31 Parameters OK 11:41:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:31 Set A/D data flow result=40 11:41:31 Set A/D channel type result=40 11:41:31 Set A/D encoding result=40 11:41:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:31 Set channel filter=0.000000e+000 result=40 11:41:31 Config A/D Result=40 11:41:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:31 Get A/D filter: -9.255963e+061 result=40 11:41:31 Get A/D value=-858993460 result=40 11:41:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:31 Parameters OK 11:41:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:31 Set A/D data flow result=40 11:41:31 Set A/D channel type result=40 11:41:31 Set A/D encoding result=40 11:41:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:31 Set channel filter=0.000000e+000 result=40 11:41:31 Config A/D Result=40 11:41:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:31 Get A/D filter: -9.255963e+061 result=40 11:41:31 Get A/D value=-858993460 result=40 11:41:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:41:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:41:31 Aux= 11:41:31 Message to Camera, serial 122644 queued 11:41:39 Received message from Master: op=Shutter serial=122654 11:41:39 Shutter LASER close 11:41:39 Received message from Master: op=PointingHead serial=122658 11:41:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:41:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:41:40 Point started: ret=0 11:41:40 point_skyscan result=0 11:41:41 Check angles 11:41:41 SkyScan query 11:41:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.74<-21516 Statuses=0008 0009 11:41:41 Msec=0 True Az=112.995 Ze=-142.74 Az status=0008 Ze status=0009 11:41:41 Check angles 11:41:41 SkyScan query 11:41:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.74<-20116 Statuses=0008 0009 11:41:42 Msec=750 True Az=112.995 Ze=-121.74 Az status=0008 Ze status=0009 11:41:42 Check angles 11:41:42 SkyScan query 11:41:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.815<-18721 Statuses=0008 0009 11:41:43 Msec=1500 True Az=112.995 Ze=-100.815 Az status=0008 Ze status=0009 11:41:43 Check angles 11:41:43 SkyScan query 11:41:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.815<-17321 Statuses=0008 0009 11:41:43 Msec=2250 True Az=112.995 Ze=-79.815 Az status=0008 Ze status=0009 11:41:44 Check angles 11:41:44 SkyScan query 11:41:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.875<-15925 Statuses=0008 0009 11:41:44 Msec=3000 True Az=112.995 Ze=-58.875 Az status=0008 Ze status=0009 11:41:44 Check angles 11:41:44 SkyScan query 11:41:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.86<-14524 Statuses=0008 0009 11:41:45 Msec=3750 True Az=112.995 Ze=-37.86 Az status=0008 Ze status=0009 11:41:45 Check angles 11:41:45 SkyScan query 11:41:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.92<-13128 Statuses=0008 0009 11:41:46 Msec=4500 True Az=112.995 Ze=-16.92 Az status=0008 Ze status=0009 11:41:46 Check angles 11:41:46 SkyScan query 11:41:46 SkyScan query done: ret=0 az=112.995<-7533 ze=4.02<-11732 Statuses=0008 0009 11:41:46 Msec=5250 True Az=112.995 Ze=4.02 Az status=0008 Ze status=0009 11:41:47 Check angles 11:41:47 SkyScan query 11:41:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:41:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:41:47 Message to Master queued w/err=0: serial=122658 error=0 11:41:52 Received message from Master: op=Filter serial=122659 11:41:52 Color wheel filter change from 0 to 0 11:41:52 FLIGetFilterPos err=0 currentPosition=0 11:41:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:41:52 Filter is already there-color wheel unchanged 11:41:52 Received message from Master: op=Shutter serial=122660 11:41:52 Shutter LASER close 11:41:52 Received message from Camera: op=State serial=122662 11:41:52 GetSingleValue result=40 Value=cccccccc 11:41:52 SkyScan query 11:41:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:41:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:53 Parameters OK 11:41:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:53 Set A/D data flow result=40 11:41:53 Set A/D channel type result=40 11:41:53 Set A/D encoding result=40 11:41:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:53 Set channel filter=0.000000e+000 result=40 11:41:53 Config A/D Result=40 11:41:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:53 Get A/D filter: -9.255963e+061 result=40 11:41:53 Get A/D value=-858993460 result=40 11:41:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:53 Parameters OK 11:41:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:53 Set A/D data flow result=40 11:41:53 Set A/D channel type result=40 11:41:53 Set A/D encoding result=40 11:41:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:53 Set channel filter=0.000000e+000 result=40 11:41:53 Config A/D Result=40 11:41:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:53 Get A/D filter: -9.255963e+061 result=40 11:41:53 Get A/D value=-858993460 result=40 11:41:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:41:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:41:53 Aux= 11:41:53 Message to Camera, serial 122662 queued 11:42:30 Received message from Master: op=PointingHead serial=122675 11:42:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:42:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:42:30 Point started: ret=0 11:42:30 point_skyscan result=0 11:42:31 Check angles 11:42:31 SkyScan query 11:42:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:42:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:42:32 Message to Master queued w/err=0: serial=122675 error=0 11:42:37 Received message from Master: op=Filter serial=122676 11:42:37 Color wheel filter change from 0 to 0 11:42:37 FLIGetFilterPos err=0 currentPosition=0 11:42:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:42:37 Filter is already there-color wheel unchanged 11:42:37 Received message from Master: op=Shutter serial=122677 11:42:37 Shutter LASER close 11:42:37 Received message from Camera: op=State serial=122679 11:42:37 GetSingleValue result=40 Value=cccccccc 11:42:37 SkyScan query 11:42:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:42:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:37 Parameters OK 11:42:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:37 Set A/D data flow result=40 11:42:37 Set A/D channel type result=40 11:42:37 Set A/D encoding result=40 11:42:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:37 Set channel filter=0.000000e+000 result=40 11:42:37 Config A/D Result=40 11:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:37 Get A/D filter: -9.255963e+061 result=40 11:42:37 Get A/D value=-858993460 result=40 11:42:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:37 Parameters OK 11:42:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:37 Set A/D data flow result=40 11:42:37 Set A/D channel type result=40 11:42:37 Set A/D encoding result=40 11:42:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:37 Set channel filter=0.000000e+000 result=40 11:42:37 Config A/D Result=40 11:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:37 Get A/D filter: -9.255963e+061 result=40 11:42:37 Get A/D value=-858993460 result=40 11:42:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:42:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:42:37 Aux= 11:42:37 Message to Camera, serial 122679 queued 11:43:14 Received message from Master: op=PointingHead serial=122692 11:43:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:43:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:43:15 Point started: ret=0 11:43:15 point_skyscan result=0 11:43:15 Check angles 11:43:15 SkyScan query 11:43:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:43:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:43:16 Message to Master queued w/err=0: serial=122692 error=0 11:43:21 Received message from Master: op=Filter serial=122693 11:43:21 Color wheel filter change from 0 to 0 11:43:21 FLIGetFilterPos err=0 currentPosition=0 11:43:21 FLIGetStepsRemaining err=0 RemainingSteps=0 11:43:21 Filter is already there-color wheel unchanged 11:43:21 Received message from Master: op=Shutter serial=122694 11:43:21 Shutter LASER close 11:43:21 Received message from Camera: op=State serial=122696 11:43:21 GetSingleValue result=40 Value=cccccccc 11:43:21 SkyScan query 11:43:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:43:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:22 Parameters OK 11:43:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:22 Set A/D data flow result=40 11:43:22 Set A/D channel type result=40 11:43:22 Set A/D encoding result=40 11:43:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:22 Set channel filter=0.000000e+000 result=40 11:43:22 Config A/D Result=40 11:43:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:22 Get A/D filter: -9.255963e+061 result=40 11:43:22 Get A/D value=-858993460 result=40 11:43:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:22 Parameters OK 11:43:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:22 Set A/D data flow result=40 11:43:22 Set A/D channel type result=40 11:43:22 Set A/D encoding result=40 11:43:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:22 Set channel filter=0.000000e+000 result=40 11:43:22 Config A/D Result=40 11:43:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:22 Get A/D filter: -9.255963e+061 result=40 11:43:22 Get A/D value=-858993460 result=40 11:43:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:43:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:43:22 Aux= 11:43:22 Message to Camera, serial 122696 queued [UTC 2019-3-5 11:43:50] 11:43:59 Received message from Master: op=PointingHead serial=122709 11:43:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:43:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:43:59 Point started: ret=0 11:43:59 point_skyscan result=0 11:44:00 Check angles 11:44:00 SkyScan query 11:44:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:44:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:44:00 Message to Master queued w/err=0: serial=122709 error=0 11:44:05 Received message from Master: op=Filter serial=122710 11:44:05 Color wheel filter change from 0 to 0 11:44:05 FLIGetFilterPos err=0 currentPosition=0 11:44:05 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:05 Filter is already there-color wheel unchanged 11:44:05 Received message from Master: op=Shutter serial=122711 11:44:05 Shutter LASER close 11:44:05 Received message from Camera: op=State serial=122713 11:44:05 GetSingleValue result=40 Value=cccccccc 11:44:05 SkyScan query 11:44:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:44:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:06 Parameters OK 11:44:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:06 Set A/D data flow result=40 11:44:06 Set A/D channel type result=40 11:44:06 Set A/D encoding result=40 11:44:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:06 Set channel filter=0.000000e+000 result=40 11:44:06 Config A/D Result=40 11:44:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:06 Get A/D filter: -9.255963e+061 result=40 11:44:06 Get A/D value=-858993460 result=40 11:44:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:06 Parameters OK 11:44:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:06 Set A/D data flow result=40 11:44:06 Set A/D channel type result=40 11:44:06 Set A/D encoding result=40 11:44:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:06 Set channel filter=0.000000e+000 result=40 11:44:06 Config A/D Result=40 11:44:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:06 Get A/D filter: -9.255963e+061 result=40 11:44:06 Get A/D value=-858993460 result=40 11:44:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:06 Aux= 11:44:06 Message to Camera, serial 122713 queued 11:44:43 Received message from Master: op=PointingHead serial=122726 11:44:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:44:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:44:43 Point started: ret=0 11:44:43 point_skyscan result=0 11:44:44 Check angles 11:44:44 SkyScan query 11:44:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 11:44:45 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 11:44:45 Check angles 11:44:45 SkyScan query 11:44:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 11:44:45 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 11:44:45 Check angles 11:44:45 SkyScan query 11:44:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.04<-16336 Statuses=0008 0009 11:44:46 Msec=1500 True Az=112.995 Ze=-65.04 Az status=0008 Ze status=0009 11:44:46 Check angles 11:44:46 SkyScan query 11:44:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.98<-17732 Statuses=0008 0009 11:44:47 Msec=2250 True Az=112.995 Ze=-85.98 Az status=0008 Ze status=0009 11:44:47 Check angles 11:44:47 SkyScan query 11:44:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.905<-19127 Statuses=0008 0009 11:44:48 Msec=3000 True Az=112.995 Ze=-106.905 Az status=0008 Ze status=0009 11:44:48 Check angles 11:44:48 SkyScan query 11:44:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.875<-20525 Statuses=0008 0009 11:44:48 Msec=3750 True Az=112.995 Ze=-127.875 Az status=0008 Ze status=0009 11:44:48 Check angles 11:44:48 SkyScan query 11:44:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.8<-21920 Statuses=0008 0009 11:44:49 Msec=4500 True Az=112.995 Ze=-148.8 Az status=0008 Ze status=0009 11:44:49 Check angles 11:44:49 SkyScan query 11:44:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.755<-23317 Statuses=0008 0009 11:44:50 Msec=5250 True Az=112.995 Ze=-169.755 Az status=0008 Ze status=0009 11:44:50 Check angles 11:44:50 SkyScan query 11:44:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:44:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:44:51 Message to Master queued w/err=0: serial=122726 error=0 11:44:56 Received message from Master: op=Filter serial=122727 11:44:56 Color wheel filter change from 0 to 0 11:44:56 FLIGetFilterPos err=0 currentPosition=0 11:44:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:56 Filter is already there-color wheel unchanged 11:44:56 Received message from Master: op=Shutter serial=122728 11:44:56 Shutter LASER open 11:44:56 Received message from Camera: op=State serial=122730 11:44:56 GetSingleValue result=40 Value=cccccccc 11:44:56 SkyScan query 11:44:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:44:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:56 Parameters OK 11:44:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:56 Set A/D data flow result=40 11:44:56 Set A/D channel type result=40 11:44:56 Set A/D encoding result=40 11:44:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:56 Set channel filter=0.000000e+000 result=40 11:44:56 Config A/D Result=40 11:44:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:56 Get A/D filter: -9.255963e+061 result=40 11:44:56 Get A/D value=-858993460 result=40 11:44:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:56 Parameters OK 11:44:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:56 Set A/D data flow result=40 11:44:56 Set A/D channel type result=40 11:44:56 Set A/D encoding result=40 11:44:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:56 Set channel filter=0.000000e+000 result=40 11:44:56 Config A/D Result=40 11:44:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:56 Get A/D filter: -9.255963e+061 result=40 11:44:56 Get A/D value=-858993460 result=40 11:44:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:56 Aux= 11:44:56 Message to Camera, serial 122730 queued 11:45:05 Received message from Master: op=Shutter serial=122740 11:45:05 Shutter LASER close 11:45:06 Received message from Master: op=PointingHead serial=122744 11:45:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:45:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:45:06 Point started: ret=0 11:45:06 point_skyscan result=0 11:45:07 Check angles 11:45:07 SkyScan query 11:45:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.89<-21526 Statuses=0008 0009 11:45:07 Msec=0 True Az=112.995 Ze=-142.89 Az status=0008 Ze status=0009 11:45:07 Check angles 11:45:07 SkyScan query 11:45:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.89<-20126 Statuses=0008 0009 11:45:08 Msec=750 True Az=112.995 Ze=-121.89 Az status=0008 Ze status=0009 11:45:08 Check angles 11:45:08 SkyScan query 11:45:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.98<-18732 Statuses=0008 0009 11:45:09 Msec=1500 True Az=112.995 Ze=-100.98 Az status=0008 Ze status=0009 11:45:09 Check angles 11:45:09 SkyScan query 11:45:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.01<-17334 Statuses=0008 0009 11:45:09 Msec=2250 True Az=112.995 Ze=-80.01 Az status=0008 Ze status=0009 11:45:10 Check angles 11:45:10 SkyScan query 11:45:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.04<-15936 Statuses=0008 0009 11:45:10 Msec=3000 True Az=112.995 Ze=-59.04 Az status=0008 Ze status=0009 11:45:10 Check angles 11:45:10 SkyScan query 11:45:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.025<-14535 Statuses=0008 0009 11:45:11 Msec=3750 True Az=112.995 Ze=-38.025 Az status=0008 Ze status=0009 11:45:11 Check angles 11:45:11 SkyScan query 11:45:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.085<-13139 Statuses=0008 0009 11:45:12 Msec=4500 True Az=112.995 Ze=-17.085 Az status=0008 Ze status=0009 11:45:12 Check angles 11:45:12 SkyScan query 11:45:12 SkyScan query done: ret=0 az=112.995<-7533 ze=3.87<-11742 Statuses=0008 0009 11:45:12 Msec=5250 True Az=112.995 Ze=3.87 Az status=0008 Ze status=0009 11:45:13 Check angles 11:45:13 SkyScan query 11:45:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:45:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:45:13 Message to Master queued w/err=0: serial=122744 error=0 11:45:18 Received message from Master: op=Filter serial=122745 11:45:18 Color wheel filter change from 0 to 0 11:45:18 FLIGetFilterPos err=0 currentPosition=0 11:45:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:45:18 Filter is already there-color wheel unchanged 11:45:18 Received message from Master: op=Shutter serial=122746 11:45:18 Shutter LASER close 11:45:19 Received message from Camera: op=State serial=122748 11:45:19 GetSingleValue result=40 Value=cccccccc 11:45:19 SkyScan query 11:45:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:45:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:19 Parameters OK 11:45:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:19 Set A/D data flow result=40 11:45:19 Set A/D channel type result=40 11:45:19 Set A/D encoding result=40 11:45:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:19 Set channel filter=0.000000e+000 result=40 11:45:19 Config A/D Result=40 11:45:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:19 Get A/D filter: -9.255963e+061 result=40 11:45:19 Get A/D value=-858993460 result=40 11:45:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:19 Parameters OK 11:45:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:19 Set A/D data flow result=40 11:45:19 Set A/D channel type result=40 11:45:19 Set A/D encoding result=40 11:45:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:19 Set channel filter=0.000000e+000 result=40 11:45:19 Config A/D Result=40 11:45:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:19 Get A/D filter: -9.255963e+061 result=40 11:45:19 Get A/D value=-858993460 result=40 11:45:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:45:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:45:19 Aux= 11:45:19 Message to Camera, serial 122748 queued 11:45:56 Received message from Master: op=PointingHead serial=122761 11:45:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:45:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:45:56 Point started: ret=0 11:45:56 point_skyscan result=0 11:45:57 Check angles 11:45:57 SkyScan query 11:45:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:45:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:45:58 Message to Master queued w/err=0: serial=122761 error=0 11:46:03 Received message from Master: op=Filter serial=122762 11:46:03 Color wheel filter change from 0 to 0 11:46:03 FLIGetFilterPos err=0 currentPosition=0 11:46:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:03 Filter is already there-color wheel unchanged 11:46:03 Received message from Master: op=Shutter serial=122763 11:46:03 Shutter LASER close 11:46:03 Received message from Camera: op=State serial=122765 11:46:03 GetSingleValue result=40 Value=cccccccc 11:46:03 SkyScan query 11:46:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:46:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:03 Parameters OK 11:46:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:03 Set A/D data flow result=40 11:46:03 Set A/D channel type result=40 11:46:03 Set A/D encoding result=40 11:46:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:03 Set channel filter=0.000000e+000 result=40 11:46:03 Config A/D Result=40 11:46:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:03 Get A/D filter: -9.255963e+061 result=40 11:46:03 Get A/D value=-858993460 result=40 11:46:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:03 Parameters OK 11:46:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:03 Set A/D data flow result=40 11:46:03 Set A/D channel type result=40 11:46:03 Set A/D encoding result=40 11:46:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:03 Set channel filter=0.000000e+000 result=40 11:46:03 Config A/D Result=40 11:46:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:03 Get A/D filter: -9.255963e+061 result=40 11:46:03 Get A/D value=-858993460 result=40 11:46:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:03 Aux= 11:46:03 Message to Camera, serial 122765 queued 11:46:40 Received message from Master: op=PointingHead serial=122778 11:46:40 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:46:40 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:46:41 Point started: ret=0 11:46:41 point_skyscan result=0 11:46:41 Check angles 11:46:41 SkyScan query 11:46:42 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 11:46:42 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 11:46:42 Check angles 11:46:42 SkyScan query 11:46:43 SkyScan query done: ret=0 az=153.57<-10238 ze=-6.495<-12433 Statuses=0009 0008 11:46:43 Msec=750 True Az=153.57 Ze=-6.495 Az status=0009 Ze status=0008 11:46:43 Check angles 11:46:43 SkyScan query 11:46:43 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 11:46:43 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 11:46:44 Check angles 11:46:44 SkyScan query 11:46:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:46:44 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:46:44 Message to Master queued w/err=0: serial=122778 error=0 11:46:49 Received message from Master: op=Filter serial=122779 11:46:49 Color wheel filter change from 0 to 0 11:46:49 FLIGetFilterPos err=0 currentPosition=0 11:46:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:49 Filter is already there-color wheel unchanged 11:46:49 Received message from Master: op=Shutter serial=122780 11:46:49 Shutter LASER close 11:46:49 Received message from Camera: op=State serial=122782 11:46:49 GetSingleValue result=40 Value=cccccccc 11:46:49 SkyScan query 11:46:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:46:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:50 Parameters OK 11:46:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:50 Set A/D data flow result=40 11:46:50 Set A/D channel type result=40 11:46:50 Set A/D encoding result=40 11:46:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:50 Set channel filter=0.000000e+000 result=40 11:46:50 Config A/D Result=40 11:46:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:50 Get A/D filter: -9.255963e+061 result=40 11:46:50 Get A/D value=-858993460 result=40 11:46:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:50 Parameters OK 11:46:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:50 Set A/D data flow result=40 11:46:50 Set A/D channel type result=40 11:46:50 Set A/D encoding result=40 11:46:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:50 Set channel filter=0.000000e+000 result=40 11:46:50 Config A/D Result=40 11:46:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:50 Get A/D filter: -9.255963e+061 result=40 11:46:50 Get A/D value=-858993460 result=40 11:46:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:50 Aux= 11:46:50 Message to Camera, serial 122782 queued 11:47:27 Received message from Master: op=PointingHead serial=122795 11:47:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:47:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:47:27 Point started: ret=0 11:47:27 point_skyscan result=0 11:47:28 Check angles 11:47:28 SkyScan query 11:47:28 SkyScan query done: ret=0 az=153<-10200 ze=6.51<-11566 Statuses=0009 0008 11:47:28 Msec=0 True Az=153 Ze=6.51 Az status=0009 Ze status=0008 11:47:29 Check angles 11:47:29 SkyScan query 11:47:29 SkyScan query done: ret=0 az=135.555<-9037 ze=6.495<-11567 Statuses=0009 0008 11:47:29 Msec=750 True Az=135.555 Ze=6.495 Az status=0009 Ze status=0008 11:47:29 Check angles 11:47:29 SkyScan query 11:47:30 SkyScan query done: ret=0 az=118.08<-7872 ze=6.495<-11567 Statuses=0009 0008 11:47:30 Msec=1500 True Az=118.08 Ze=6.495 Az status=0009 Ze status=0008 11:47:30 Check angles 11:47:30 SkyScan query 11:47:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:47:31 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:47:31 Message to Master queued w/err=0: serial=122795 error=0 11:47:36 Received message from Master: op=Filter serial=122796 11:47:36 Color wheel filter change from 0 to 0 11:47:36 FLIGetFilterPos err=0 currentPosition=0 11:47:36 FLIGetStepsRemaining err=0 RemainingSteps=0 11:47:36 Filter is already there-color wheel unchanged 11:47:36 Received message from Master: op=Shutter serial=122797 11:47:36 Shutter LASER close 11:47:36 Received message from Camera: op=State serial=122799 11:47:36 GetSingleValue result=40 Value=cccccccc 11:47:36 SkyScan query 11:47:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:47:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:37 Parameters OK 11:47:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:37 Set A/D data flow result=40 11:47:37 Set A/D channel type result=40 11:47:37 Set A/D encoding result=40 11:47:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:37 Set channel filter=0.000000e+000 result=40 11:47:37 Config A/D Result=40 11:47:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:37 Get A/D filter: -9.255963e+061 result=40 11:47:37 Get A/D value=-858993460 result=40 11:47:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:37 Parameters OK 11:47:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:37 Set A/D data flow result=40 11:47:37 Set A/D channel type result=40 11:47:37 Set A/D encoding result=40 11:47:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:37 Set channel filter=0.000000e+000 result=40 11:47:37 Config A/D Result=40 11:47:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:37 Get A/D filter: -9.255963e+061 result=40 11:47:37 Get A/D value=-858993460 result=40 11:47:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:47:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:47:37 Aux= 11:47:37 Message to Camera, serial 122799 queued 11:48:14 Received message from Master: op=PointingHead serial=122812 11:48:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:48:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:48:14 Point started: ret=0 11:48:14 point_skyscan result=0 11:48:15 Check angles 11:48:15 SkyScan query 11:48:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.22<-13548 Statuses=0008 0009 11:48:15 Msec=0 True Az=112.995 Ze=-23.22 Az status=0008 Ze status=0009 11:48:15 Check angles 11:48:15 SkyScan query 11:48:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.19<-14946 Statuses=0008 0009 11:48:16 Msec=750 True Az=112.995 Ze=-44.19 Az status=0008 Ze status=0009 11:48:16 Check angles 11:48:16 SkyScan query 11:48:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 11:48:17 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 11:48:17 Check angles 11:48:17 SkyScan query 11:48:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.46<-17764 Statuses=0008 0009 11:48:17 Msec=2250 True Az=112.995 Ze=-86.46 Az status=0008 Ze status=0009 11:48:18 Check angles 11:48:18 SkyScan query 11:48:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.43<-19162 Statuses=0008 0009 11:48:18 Msec=3000 True Az=112.995 Ze=-107.43 Az status=0008 Ze status=0009 11:48:18 Check angles 11:48:18 SkyScan query 11:48:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.385<-20559 Statuses=0008 0009 11:48:19 Msec=3750 True Az=112.995 Ze=-128.385 Az status=0008 Ze status=0009 11:48:19 Check angles 11:48:19 SkyScan query 11:48:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.385<-21959 Statuses=0008 0009 11:48:20 Msec=4500 True Az=112.995 Ze=-149.385 Az status=0008 Ze status=0009 11:48:20 Check angles 11:48:20 SkyScan query 11:48:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.31<-23354 Statuses=0008 0009 11:48:20 Msec=5250 True Az=112.995 Ze=-170.31 Az status=0008 Ze status=0009 11:48:21 Check angles 11:48:21 SkyScan query 11:48:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:48:21 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:48:21 Message to Master queued w/err=0: serial=122812 error=0 11:48:26 Received message from Master: op=Filter serial=122813 11:48:26 Color wheel filter change from 0 to 0 11:48:26 FLIGetFilterPos err=0 currentPosition=0 11:48:26 FLIGetStepsRemaining err=0 RemainingSteps=0 11:48:26 Filter is already there-color wheel unchanged 11:48:26 Received message from Master: op=Shutter serial=122814 11:48:26 Shutter LASER open 11:48:27 Received message from Camera: op=State serial=122816 11:48:27 GetSingleValue result=40 Value=cccccccc 11:48:27 SkyScan query 11:48:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:48:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:27 Parameters OK 11:48:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:27 Set A/D data flow result=40 11:48:27 Set A/D channel type result=40 11:48:27 Set A/D encoding result=40 11:48:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:27 Set channel filter=0.000000e+000 result=40 11:48:27 Config A/D Result=40 11:48:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:27 Get A/D filter: -9.255963e+061 result=40 11:48:27 Get A/D value=-858993460 result=40 11:48:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:27 Parameters OK 11:48:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:27 Set A/D data flow result=40 11:48:27 Set A/D channel type result=40 11:48:27 Set A/D encoding result=40 11:48:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:27 Set channel filter=0.000000e+000 result=40 11:48:27 Config A/D Result=40 11:48:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:27 Get A/D filter: -9.255963e+061 result=40 11:48:27 Get A/D value=-858993460 result=40 11:48:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:48:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:48:27 Aux= 11:48:27 Message to Camera, serial 122816 queued 11:48:36 Received message from Master: op=Shutter serial=122826 11:48:36 Shutter LASER close 11:48:36 Received message from Master: op=PointingHead serial=122830 11:48:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:48:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:48:36 Point started: ret=0 11:48:36 point_skyscan result=0 11:48:37 Check angles 11:48:37 SkyScan query 11:48:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 11:48:38 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 11:48:38 Check angles 11:48:38 SkyScan query 11:48:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.475<-20165 Statuses=0008 0009 11:48:38 Msec=750 True Az=112.995 Ze=-122.475 Az status=0008 Ze status=0009 11:48:39 Check angles 11:48:39 SkyScan query 11:48:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 11:48:39 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 11:48:39 Check angles 11:48:39 SkyScan query 11:48:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.59<-17306 Statuses=0008 0009 11:48:40 Msec=2250 True Az=112.995 Ze=-79.59 Az status=0008 Ze status=0009 11:48:40 Check angles 11:48:40 SkyScan query 11:48:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.65<-15910 Statuses=0008 0009 11:48:41 Msec=3000 True Az=112.995 Ze=-58.65 Az status=0008 Ze status=0009 11:48:41 Check angles 11:48:41 SkyScan query 11:48:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.68<-14512 Statuses=0008 0009 11:48:41 Msec=3750 True Az=112.995 Ze=-37.68 Az status=0008 Ze status=0009 11:48:42 Check angles 11:48:42 SkyScan query 11:48:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.74<-13116 Statuses=0008 0009 11:48:42 Msec=4500 True Az=112.995 Ze=-16.74 Az status=0008 Ze status=0009 11:48:42 Check angles 11:48:42 SkyScan query 11:48:43 SkyScan query done: ret=0 az=113.01<-7534 ze=4.17<-11722 Statuses=0008 0009 11:48:43 Msec=5250 True Az=113.01 Ze=4.17 Az status=0008 Ze status=0009 11:48:43 Check angles 11:48:43 SkyScan query 11:48:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:48:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:48:44 Message to Master queued w/err=0: serial=122830 error=0 11:48:49 Received message from Master: op=Filter serial=122831 11:48:49 Color wheel filter change from 0 to 0 11:48:49 FLIGetFilterPos err=0 currentPosition=0 11:48:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:48:49 Filter is already there-color wheel unchanged 11:48:49 Received message from Master: op=Shutter serial=122832 11:48:49 Shutter LASER close 11:48:49 Received message from Camera: op=State serial=122834 11:48:49 GetSingleValue result=40 Value=cccccccc 11:48:49 SkyScan query 11:48:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:48:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:50 Parameters OK 11:48:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:50 Set A/D data flow result=40 11:48:50 Set A/D channel type result=40 11:48:50 Set A/D encoding result=40 11:48:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:50 Set channel filter=0.000000e+000 result=40 11:48:50 Config A/D Result=40 11:48:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:50 Get A/D filter: -9.255963e+061 result=40 11:48:50 Get A/D value=-858993460 result=40 11:48:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:50 Parameters OK 11:48:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:50 Set A/D data flow result=40 11:48:50 Set A/D channel type result=40 11:48:50 Set A/D encoding result=40 11:48:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:50 Set channel filter=0.000000e+000 result=40 11:48:50 Config A/D Result=40 11:48:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:50 Get A/D filter: -9.255963e+061 result=40 11:48:50 Get A/D value=-858993460 result=40 11:48:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:48:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:48:50 Aux= 11:48:50 Message to Camera, serial 122834 queued 11:49:26 Received message from Master: op=PointingHead serial=122847 11:49:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:49:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:49:27 Point started: ret=0 11:49:27 point_skyscan result=0 11:49:28 Check angles 11:49:28 SkyScan query 11:49:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:49:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:49:28 Message to Master queued w/err=0: serial=122847 error=0 11:49:33 Received message from Master: op=Filter serial=122848 11:49:33 Color wheel filter change from 0 to 0 11:49:33 FLIGetFilterPos err=0 currentPosition=0 11:49:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:49:33 Filter is already there-color wheel unchanged 11:49:33 Received message from Master: op=Shutter serial=122849 11:49:33 Shutter LASER close 11:49:33 Received message from Camera: op=State serial=122851 11:49:33 GetSingleValue result=40 Value=cccccccc 11:49:33 SkyScan query 11:49:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:49:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:34 Parameters OK 11:49:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:34 Set A/D data flow result=40 11:49:34 Set A/D channel type result=40 11:49:34 Set A/D encoding result=40 11:49:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:34 Set channel filter=0.000000e+000 result=40 11:49:34 Config A/D Result=40 11:49:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:34 Get A/D filter: -9.255963e+061 result=40 11:49:34 Get A/D value=-858993460 result=40 11:49:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:34 Parameters OK 11:49:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:34 Set A/D data flow result=40 11:49:34 Set A/D channel type result=40 11:49:34 Set A/D encoding result=40 11:49:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:34 Set channel filter=0.000000e+000 result=40 11:49:34 Config A/D Result=40 11:49:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:34 Get A/D filter: -9.255963e+061 result=40 11:49:34 Get A/D value=-858993460 result=40 11:49:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:49:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:49:34 Aux= 11:49:34 Message to Camera, serial 122851 queued 11:50:11 Received message from Master: op=PointingHead serial=122864 11:50:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:50:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:50:11 Point started: ret=0 11:50:11 point_skyscan result=0 11:50:12 Check angles 11:50:12 SkyScan query 11:50:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:50:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:50:12 Message to Master queued w/err=0: serial=122864 error=0 11:50:17 Received message from Master: op=Filter serial=122865 11:50:17 Color wheel filter change from 0 to 0 11:50:17 FLIGetFilterPos err=0 currentPosition=0 11:50:17 FLIGetStepsRemaining err=0 RemainingSteps=0 11:50:17 Filter is already there-color wheel unchanged 11:50:18 Received message from Master: op=Shutter serial=122866 11:50:18 Shutter LASER close 11:50:18 Received message from Camera: op=State serial=122868 11:50:18 GetSingleValue result=40 Value=cccccccc 11:50:18 SkyScan query 11:50:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:50:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:18 Parameters OK 11:50:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:18 Set A/D data flow result=40 11:50:18 Set A/D channel type result=40 11:50:18 Set A/D encoding result=40 11:50:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:18 Set channel filter=0.000000e+000 result=40 11:50:18 Config A/D Result=40 11:50:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:18 Get A/D filter: -9.255963e+061 result=40 11:50:18 Get A/D value=-858993460 result=40 11:50:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:18 Parameters OK 11:50:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:18 Set A/D data flow result=40 11:50:18 Set A/D channel type result=40 11:50:18 Set A/D encoding result=40 11:50:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:18 Set channel filter=0.000000e+000 result=40 11:50:18 Config A/D Result=40 11:50:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:18 Get A/D filter: -9.255963e+061 result=40 11:50:18 Get A/D value=-858993460 result=40 11:50:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:50:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:50:18 Aux= 11:50:18 Message to Camera, serial 122868 queued 11:50:55 Received message from Master: op=PointingHead serial=122881 11:50:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:50:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:50:55 Point started: ret=0 11:50:55 point_skyscan result=0 11:50:56 Check angles 11:50:56 SkyScan query 11:50:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:50:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:50:57 Message to Master queued w/err=0: serial=122881 error=0 11:51:02 Received message from Master: op=Filter serial=122882 11:51:02 Color wheel filter change from 0 to 0 11:51:02 FLIGetFilterPos err=0 currentPosition=0 11:51:02 FLIGetStepsRemaining err=0 RemainingSteps=0 11:51:02 Filter is already there-color wheel unchanged 11:51:02 Received message from Master: op=Shutter serial=122883 11:51:02 Shutter LASER close 11:51:02 Received message from Camera: op=State serial=122885 11:51:02 GetSingleValue result=40 Value=cccccccc 11:51:02 SkyScan query 11:51:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:51:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:02 Parameters OK 11:51:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:02 Set A/D data flow result=40 11:51:02 Set A/D channel type result=40 11:51:02 Set A/D encoding result=40 11:51:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:02 Set channel filter=0.000000e+000 result=40 11:51:02 Config A/D Result=40 11:51:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:02 Get A/D filter: -9.255963e+061 result=40 11:51:02 Get A/D value=-858993460 result=40 11:51:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:02 Parameters OK 11:51:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:02 Set A/D data flow result=40 11:51:02 Set A/D channel type result=40 11:51:02 Set A/D encoding result=40 11:51:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:02 Set channel filter=0.000000e+000 result=40 11:51:02 Config A/D Result=40 11:51:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:02 Get A/D filter: -9.255963e+061 result=40 11:51:02 Get A/D value=-858993460 result=40 11:51:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:02 Aux= 11:51:02 Message to Camera, serial 122885 queued 11:51:39 Received message from Master: op=PointingHead serial=122898 11:51:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:51:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:51:40 Point started: ret=0 11:51:40 point_skyscan result=0 11:51:40 Check angles 11:51:40 SkyScan query 11:51:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 11:51:41 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 11:51:41 Check angles 11:51:41 SkyScan query 11:51:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 11:51:42 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 11:51:42 Check angles 11:51:42 SkyScan query 11:51:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.82<-16388 Statuses=0008 0009 11:51:42 Msec=1500 True Az=112.995 Ze=-65.82 Az status=0008 Ze status=0009 11:51:43 Check angles 11:51:43 SkyScan query 11:51:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.805<-17787 Statuses=0008 0009 11:51:43 Msec=2250 True Az=112.995 Ze=-86.805 Az status=0008 Ze status=0009 11:51:43 Check angles 11:51:43 SkyScan query 11:51:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.76<-19184 Statuses=0008 0009 11:51:44 Msec=3000 True Az=112.995 Ze=-107.76 Az status=0008 Ze status=0009 11:51:44 Check angles 11:51:44 SkyScan query 11:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.715<-20581 Statuses=0008 0009 11:51:45 Msec=3750 True Az=112.995 Ze=-128.715 Az status=0008 Ze status=0009 11:51:45 Check angles 11:51:45 SkyScan query 11:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.685<-21979 Statuses=0008 0009 11:51:45 Msec=4500 True Az=112.995 Ze=-149.685 Az status=0008 Ze status=0009 11:51:46 Check angles 11:51:46 SkyScan query 11:51:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.61<-23374 Statuses=0008 0009 11:51:46 Msec=5250 True Az=112.995 Ze=-170.61 Az status=0008 Ze status=0009 11:51:46 Check angles 11:51:46 SkyScan query 11:51:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:51:47 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:51:47 Message to Master queued w/err=0: serial=122898 error=0 11:51:52 Received message from Master: op=Filter serial=122899 11:51:52 Color wheel filter change from 0 to 0 11:51:52 FLIGetFilterPos err=0 currentPosition=0 11:51:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:51:52 Filter is already there-color wheel unchanged 11:51:52 Received message from Master: op=Shutter serial=122900 11:51:52 Shutter LASER open 11:51:52 Received message from Camera: op=State serial=122902 11:51:52 GetSingleValue result=40 Value=cccccccc 11:51:52 SkyScan query 11:51:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:51:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:53 Parameters OK 11:51:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:53 Set A/D data flow result=40 11:51:53 Set A/D channel type result=40 11:51:53 Set A/D encoding result=40 11:51:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:53 Set channel filter=0.000000e+000 result=40 11:51:53 Config A/D Result=40 11:51:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:53 Get A/D filter: -9.255963e+061 result=40 11:51:53 Get A/D value=-858993460 result=40 11:51:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:53 Parameters OK 11:51:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:53 Set A/D data flow result=40 11:51:53 Set A/D channel type result=40 11:51:53 Set A/D encoding result=40 11:51:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:53 Set channel filter=0.000000e+000 result=40 11:51:53 Config A/D Result=40 11:51:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:53 Get A/D filter: -9.255963e+061 result=40 11:51:53 Get A/D value=-858993460 result=40 11:51:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:53 Aux= 11:51:53 Message to Camera, serial 122902 queued 11:52:01 Received message from Master: op=Shutter serial=122912 11:52:01 Shutter LASER close 11:52:02 Received message from Master: op=PointingHead serial=122916 11:52:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:52:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:52:02 Point started: ret=0 11:52:02 point_skyscan result=0 11:52:03 Check angles 11:52:03 SkyScan query 11:52:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.92<-21528 Statuses=0008 0009 11:52:04 Msec=0 True Az=112.995 Ze=-142.92 Az status=0008 Ze status=0009 11:52:04 Check angles 11:52:04 SkyScan query 11:52:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.47<-20098 Statuses=0008 0009 11:52:04 Msec=750 True Az=112.995 Ze=-121.47 Az status=0008 Ze status=0009 11:52:05 Check angles 11:52:05 SkyScan query 11:52:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.5<-18700 Statuses=0008 0009 11:52:05 Msec=1500 True Az=112.995 Ze=-100.5 Az status=0008 Ze status=0009 11:52:05 Check angles 11:52:05 SkyScan query 11:52:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.11<-17274 Statuses=0008 0009 11:52:06 Msec=2250 True Az=112.995 Ze=-79.11 Az status=0008 Ze status=0009 11:52:06 Check angles 11:52:06 SkyScan query 11:52:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.78<-15852 Statuses=0008 0009 11:52:07 Msec=3000 True Az=112.995 Ze=-57.78 Az status=0008 Ze status=0009 11:52:07 Check angles 11:52:07 SkyScan query 11:52:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.345<-14423 Statuses=0008 0009 11:52:07 Msec=3750 True Az=112.995 Ze=-36.345 Az status=0008 Ze status=0009 11:52:08 Check angles 11:52:08 SkyScan query 11:52:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.39<-13026 Statuses=0008 0009 11:52:08 Msec=4500 True Az=112.995 Ze=-15.39 Az status=0008 Ze status=0009 11:52:08 Check angles 11:52:08 SkyScan query 11:52:09 SkyScan query done: ret=0 az=112.995<-7533 ze=5.475<-11635 Statuses=0008 0009 11:52:09 Msec=5250 True Az=112.995 Ze=5.475 Az status=0008 Ze status=0009 11:52:09 Check angles 11:52:09 SkyScan query 11:52:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:52:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:52:10 Message to Master queued w/err=0: serial=122916 error=0 11:52:15 Received message from Master: op=Filter serial=122917 11:52:15 Color wheel filter change from 0 to 0 11:52:15 FLIGetFilterPos err=0 currentPosition=0 11:52:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:52:15 Filter is already there-color wheel unchanged 11:52:15 Received message from Master: op=Shutter serial=122918 11:52:15 Shutter LASER close 11:52:15 Received message from Camera: op=State serial=122920 11:52:15 GetSingleValue result=40 Value=cccccccc 11:52:15 SkyScan query 11:52:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:52:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:16 Parameters OK 11:52:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:16 Set A/D data flow result=40 11:52:16 Set A/D channel type result=40 11:52:16 Set A/D encoding result=40 11:52:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:16 Set channel filter=0.000000e+000 result=40 11:52:16 Config A/D Result=40 11:52:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:16 Get A/D filter: -9.255963e+061 result=40 11:52:16 Get A/D value=-858993460 result=40 11:52:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:16 Parameters OK 11:52:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:16 Set A/D data flow result=40 11:52:16 Set A/D channel type result=40 11:52:16 Set A/D encoding result=40 11:52:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:16 Set channel filter=0.000000e+000 result=40 11:52:16 Config A/D Result=40 11:52:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:16 Get A/D filter: -9.255963e+061 result=40 11:52:16 Get A/D value=-858993460 result=40 11:52:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:52:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:52:16 Aux= 11:52:16 Message to Camera, serial 122920 queued 11:52:52 Received message from Master: op=PointingHead serial=122932 11:52:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:52:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:52:52 Point started: ret=0 11:52:52 point_skyscan result=0 11:52:53 Check angles 11:52:53 SkyScan query 11:52:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:52:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:52:53 Message to Master queued w/err=0: serial=122932 error=0 11:52:58 Received message from Master: op=Filter serial=122933 11:52:58 Color wheel filter change from 0 to 0 11:52:58 FLIGetFilterPos err=0 currentPosition=0 11:52:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:52:58 Filter is already there-color wheel unchanged 11:52:58 Received message from Master: op=Shutter serial=122934 11:52:58 Shutter LASER close 11:52:58 Received message from Camera: op=State serial=122936 11:52:58 GetSingleValue result=40 Value=cccccccc 11:52:58 SkyScan query 11:52:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:52:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:59 Parameters OK 11:52:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:59 Set A/D data flow result=40 11:52:59 Set A/D channel type result=40 11:52:59 Set A/D encoding result=40 11:52:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:59 Set channel filter=0.000000e+000 result=40 11:52:59 Config A/D Result=40 11:52:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:59 Get A/D filter: -9.255963e+061 result=40 11:52:59 Get A/D value=-858993460 result=40 11:52:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:59 Parameters OK 11:52:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:59 Set A/D data flow result=40 11:52:59 Set A/D channel type result=40 11:52:59 Set A/D encoding result=40 11:52:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:59 Set channel filter=0.000000e+000 result=40 11:52:59 Config A/D Result=40 11:52:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:59 Get A/D filter: -9.255963e+061 result=40 11:52:59 Get A/D value=-858993460 result=40 11:52:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:52:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:52:59 Aux= 11:52:59 Message to Camera, serial 122936 queued 11:53:36 Received message from Master: op=PointingHead serial=122949 11:53:36 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:53:36 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:53:36 Point started: ret=0 11:53:36 point_skyscan result=0 11:53:37 Check angles 11:53:37 SkyScan query 11:53:37 SkyScan query done: ret=0 az=135.84<-9056 ze=-6.51<-12434 Statuses=0009 0008 11:53:37 Msec=0 True Az=135.84 Ze=-6.51 Az status=0009 Ze status=0008 11:53:38 Check angles 11:53:38 SkyScan query 11:53:38 SkyScan query done: ret=0 az=153.24<-10216 ze=-6.495<-12433 Statuses=0009 0008 11:53:38 Msec=750 True Az=153.24 Ze=-6.495 Az status=0009 Ze status=0008 11:53:38 Check angles 11:53:38 SkyScan query 11:53:39 SkyScan query done: ret=0 az=170.745<-11383 ze=-6.495<-12433 Statuses=0009 0008 11:53:39 Msec=1500 True Az=170.745 Ze=-6.495 Az status=0009 Ze status=0008 11:53:39 Check angles 11:53:39 SkyScan query 11:53:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:53:40 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:53:40 Message to Master queued w/err=0: serial=122949 error=0 11:53:45 Received message from Master: op=Filter serial=122950 11:53:45 Color wheel filter change from 0 to 0 11:53:45 FLIGetFilterPos err=0 currentPosition=0 11:53:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:53:45 Filter is already there-color wheel unchanged 11:53:45 Received message from Master: op=Shutter serial=122951 11:53:45 Shutter LASER close 11:53:45 Received message from Camera: op=State serial=122953 11:53:45 GetSingleValue result=40 Value=cccccccc 11:53:45 SkyScan query 11:53:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:53:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:46 Parameters OK 11:53:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:46 Set A/D data flow result=40 11:53:46 Set A/D channel type result=40 11:53:46 Set A/D encoding result=40 11:53:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:46 Set channel filter=0.000000e+000 result=40 11:53:46 Config A/D Result=40 11:53:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:46 Get A/D filter: -9.255963e+061 result=40 11:53:46 Get A/D value=-858993460 result=40 11:53:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:46 Parameters OK 11:53:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:46 Set A/D data flow result=40 11:53:46 Set A/D channel type result=40 11:53:46 Set A/D encoding result=40 11:53:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:46 Set channel filter=0.000000e+000 result=40 11:53:46 Config A/D Result=40 11:53:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:46 Get A/D filter: -9.255963e+061 result=40 11:53:46 Get A/D value=-858993460 result=40 11:53:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:53:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:53:46 Aux= 11:53:46 Message to Camera, serial 122953 queued [UTC 2019-3-5 11:54:22] 11:54:22 Received message from Master: op=PointingHead serial=122966 11:54:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:54:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:54:23 Point started: ret=0 11:54:23 point_skyscan result=0 11:54:24 Check angles 11:54:24 SkyScan query 11:54:24 SkyScan query done: ret=0 az=152.7<-10180 ze=6.51<-11566 Statuses=0009 0008 11:54:24 Msec=0 True Az=152.7 Ze=6.51 Az status=0009 Ze status=0008 11:54:24 Check angles 11:54:24 SkyScan query 11:54:25 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 11:54:25 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 11:54:25 Check angles 11:54:25 SkyScan query 11:54:26 SkyScan query done: ret=0 az=117.66<-7844 ze=6.495<-11567 Statuses=0009 0008 11:54:26 Msec=1500 True Az=117.66 Ze=6.495 Az status=0009 Ze status=0008 11:54:26 Check angles 11:54:26 SkyScan query 11:54:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:54:26 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:54:26 Message to Master queued w/err=0: serial=122966 error=0 11:54:31 Received message from Master: op=Filter serial=122967 11:54:31 Color wheel filter change from 0 to 0 11:54:31 FLIGetFilterPos err=0 currentPosition=0 11:54:31 FLIGetStepsRemaining err=0 RemainingSteps=0 11:54:31 Filter is already there-color wheel unchanged 11:54:32 Received message from Master: op=Shutter serial=122968 11:54:32 Shutter LASER close 11:54:32 Received message from Camera: op=State serial=122970 11:54:32 GetSingleValue result=40 Value=cccccccc 11:54:32 SkyScan query 11:54:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:54:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:32 Parameters OK 11:54:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:32 Set A/D data flow result=40 11:54:32 Set A/D channel type result=40 11:54:32 Set A/D encoding result=40 11:54:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:32 Set channel filter=0.000000e+000 result=40 11:54:32 Config A/D Result=40 11:54:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:32 Get A/D filter: -9.255963e+061 result=40 11:54:32 Get A/D value=-858993460 result=40 11:54:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:32 Parameters OK 11:54:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:32 Set A/D data flow result=40 11:54:32 Set A/D channel type result=40 11:54:32 Set A/D encoding result=40 11:54:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:32 Set channel filter=0.000000e+000 result=40 11:54:32 Config A/D Result=40 11:54:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:32 Get A/D filter: -9.255963e+061 result=40 11:54:32 Get A/D value=-858993460 result=40 11:54:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:54:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:54:32 Aux= 11:54:32 Message to Camera, serial 122970 queued 11:55:09 Received message from Master: op=PointingHead serial=122983 11:55:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:55:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:55:09 Point started: ret=0 11:55:09 point_skyscan result=0 11:55:10 Check angles 11:55:10 SkyScan query 11:55:11 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.34<-13556 Statuses=0008 0009 11:55:11 Msec=0 True Az=112.98 Ze=-23.34 Az status=0008 Ze status=0009 11:55:11 Check angles 11:55:11 SkyScan query 11:55:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.67<-14978 Statuses=0008 0009 11:55:11 Msec=750 True Az=112.995 Ze=-44.67 Az status=0008 Ze status=0009 11:55:12 Check angles 11:55:12 SkyScan query 11:55:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.625<-16375 Statuses=0008 0009 11:55:12 Msec=1500 True Az=112.995 Ze=-65.625 Az status=0008 Ze status=0009 11:55:12 Check angles 11:55:12 SkyScan query 11:55:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 11:55:13 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 11:55:13 Check angles 11:55:13 SkyScan query 11:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.06<-19204 Statuses=0008 0009 11:55:14 Msec=3000 True Az=112.995 Ze=-108.06 Az status=0008 Ze status=0009 11:55:14 Check angles 11:55:14 SkyScan query 11:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.985<-20599 Statuses=0008 0009 11:55:14 Msec=3750 True Az=112.995 Ze=-128.985 Az status=0008 Ze status=0009 11:55:15 Check angles 11:55:15 SkyScan query 11:55:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.955<-21997 Statuses=0008 0009 11:55:15 Msec=4500 True Az=112.995 Ze=-149.955 Az status=0008 Ze status=0009 11:55:15 Check angles 11:55:15 SkyScan query 11:55:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.835<-23389 Statuses=0008 0009 11:55:16 Msec=5250 True Az=112.995 Ze=-170.835 Az status=0008 Ze status=0009 11:55:16 Check angles 11:55:16 SkyScan query 11:55:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:55:17 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:55:17 Message to Master queued w/err=0: serial=122983 error=0 11:55:22 Received message from Master: op=Filter serial=122984 11:55:22 Color wheel filter change from 0 to 0 11:55:22 FLIGetFilterPos err=0 currentPosition=0 11:55:22 FLIGetStepsRemaining err=0 RemainingSteps=0 11:55:22 Filter is already there-color wheel unchanged 11:55:22 Received message from Master: op=Shutter serial=122985 11:55:22 Shutter LASER open 11:55:22 Received message from Camera: op=State serial=122987 11:55:22 GetSingleValue result=40 Value=cccccccc 11:55:22 SkyScan query 11:55:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:55:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:23 Parameters OK 11:55:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:23 Set A/D data flow result=40 11:55:23 Set A/D channel type result=40 11:55:23 Set A/D encoding result=40 11:55:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:23 Set channel filter=0.000000e+000 result=40 11:55:23 Config A/D Result=40 11:55:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:23 Get A/D filter: -9.255963e+061 result=40 11:55:23 Get A/D value=-858993460 result=40 11:55:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:23 Parameters OK 11:55:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:23 Set A/D data flow result=40 11:55:23 Set A/D channel type result=40 11:55:23 Set A/D encoding result=40 11:55:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:23 Set channel filter=0.000000e+000 result=40 11:55:23 Config A/D Result=40 11:55:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:23 Get A/D filter: -9.255963e+061 result=40 11:55:23 Get A/D value=-858993460 result=40 11:55:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:55:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:55:23 Aux= 11:55:23 Message to Camera, serial 122987 queued 11:55:31 Received message from Master: op=Shutter serial=122997 11:55:31 Shutter LASER close 11:55:32 Received message from Master: op=PointingHead serial=123001 11:55:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:55:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:55:32 Point started: ret=0 11:55:32 point_skyscan result=0 11:55:33 Check angles 11:55:33 SkyScan query 11:55:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 11:55:33 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 11:55:33 Check angles 11:55:33 SkyScan query 11:55:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 11:55:34 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 11:55:34 Check angles 11:55:34 SkyScan query 11:55:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.995<-18733 Statuses=0008 0009 11:55:35 Msec=1500 True Az=112.995 Ze=-100.995 Az status=0008 Ze status=0009 11:55:35 Check angles 11:55:35 SkyScan query 11:55:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.025<-17335 Statuses=0008 0009 11:55:35 Msec=2250 True Az=112.995 Ze=-80.025 Az status=0008 Ze status=0009 11:55:36 Check angles 11:55:36 SkyScan query 11:55:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.07<-15938 Statuses=0008 0009 11:55:36 Msec=3000 True Az=112.995 Ze=-59.07 Az status=0008 Ze status=0009 11:55:36 Check angles 11:55:36 SkyScan query 11:55:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.04<-14536 Statuses=0008 0009 11:55:37 Msec=3750 True Az=112.995 Ze=-38.04 Az status=0008 Ze status=0009 11:55:37 Check angles 11:55:37 SkyScan query 11:55:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.1<-13140 Statuses=0008 0009 11:55:38 Msec=4500 True Az=112.995 Ze=-17.1 Az status=0008 Ze status=0009 11:55:38 Check angles 11:55:38 SkyScan query 11:55:38 SkyScan query done: ret=0 az=112.995<-7533 ze=3.855<-11743 Statuses=0008 0009 11:55:38 Msec=5250 True Az=112.995 Ze=3.855 Az status=0008 Ze status=0009 11:55:39 Check angles 11:55:39 SkyScan query 11:55:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:55:39 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:55:39 Message to Master queued w/err=0: serial=123001 error=0 11:55:44 Received message from Master: op=Filter serial=123002 11:55:44 Color wheel filter change from 0 to 0 11:55:44 FLIGetFilterPos err=0 currentPosition=0 11:55:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:55:44 Filter is already there-color wheel unchanged 11:55:44 Received message from Master: op=Shutter serial=123003 11:55:44 Shutter LASER close 11:55:45 Received message from Camera: op=State serial=123005 11:55:45 GetSingleValue result=40 Value=cccccccc 11:55:45 SkyScan query 11:55:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:55:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:45 Parameters OK 11:55:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:45 Set A/D data flow result=40 11:55:45 Set A/D channel type result=40 11:55:45 Set A/D encoding result=40 11:55:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:45 Set channel filter=0.000000e+000 result=40 11:55:45 Config A/D Result=40 11:55:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:45 Get A/D filter: -9.255963e+061 result=40 11:55:45 Get A/D value=-858993460 result=40 11:55:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:45 Parameters OK 11:55:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:45 Set A/D data flow result=40 11:55:45 Set A/D channel type result=40 11:55:45 Set A/D encoding result=40 11:55:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:45 Set channel filter=0.000000e+000 result=40 11:55:45 Config A/D Result=40 11:55:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:45 Get A/D filter: -9.255963e+061 result=40 11:55:45 Get A/D value=-858993460 result=40 11:55:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:55:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:55:45 Aux= 11:55:45 Message to Camera, serial 123005 queued 11:56:22 Received message from Master: op=PointingHead serial=123018 11:56:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:56:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:56:22 Point started: ret=0 11:56:22 point_skyscan result=0 11:56:23 Check angles 11:56:23 SkyScan query 11:56:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:56:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:56:24 Message to Master queued w/err=0: serial=123018 error=0 11:56:29 Received message from Master: op=Filter serial=123019 11:56:29 Color wheel filter change from 0 to 0 11:56:29 FLIGetFilterPos err=0 currentPosition=0 11:56:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:56:29 Filter is already there-color wheel unchanged 11:56:29 Received message from Master: op=Shutter serial=123020 11:56:29 Shutter LASER close 11:56:29 Received message from Camera: op=State serial=123022 11:56:29 GetSingleValue result=40 Value=cccccccc 11:56:29 SkyScan query 11:56:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:56:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:29 Parameters OK 11:56:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:29 Set A/D data flow result=40 11:56:29 Set A/D channel type result=40 11:56:29 Set A/D encoding result=40 11:56:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:29 Set channel filter=0.000000e+000 result=40 11:56:29 Config A/D Result=40 11:56:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:29 Get A/D filter: -9.255963e+061 result=40 11:56:29 Get A/D value=-858993460 result=40 11:56:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:29 Parameters OK 11:56:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:29 Set A/D data flow result=40 11:56:29 Set A/D channel type result=40 11:56:29 Set A/D encoding result=40 11:56:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:29 Set channel filter=0.000000e+000 result=40 11:56:29 Config A/D Result=40 11:56:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:29 Get A/D filter: -9.255963e+061 result=40 11:56:29 Get A/D value=-858993460 result=40 11:56:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:56:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:56:29 Aux= 11:56:29 Message to Camera, serial 123022 queued 11:57:06 Received message from Master: op=PointingHead serial=123035 11:57:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:57:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:57:07 Point started: ret=0 11:57:07 point_skyscan result=0 11:57:07 Check angles 11:57:07 SkyScan query 11:57:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:57:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:57:08 Message to Master queued w/err=0: serial=123035 error=0 11:57:13 Received message from Master: op=Filter serial=123036 11:57:13 Color wheel filter change from 0 to 0 11:57:13 FLIGetFilterPos err=0 currentPosition=0 11:57:13 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:13 Filter is already there-color wheel unchanged 11:57:13 Received message from Master: op=Shutter serial=123037 11:57:13 Shutter LASER close 11:57:13 Received message from Camera: op=State serial=123039 11:57:13 GetSingleValue result=40 Value=cccccccc 11:57:13 SkyScan query 11:57:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:57:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:14 Parameters OK 11:57:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:14 Set A/D data flow result=40 11:57:14 Set A/D channel type result=40 11:57:14 Set A/D encoding result=40 11:57:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:14 Set channel filter=0.000000e+000 result=40 11:57:14 Config A/D Result=40 11:57:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:14 Get A/D filter: -9.255963e+061 result=40 11:57:14 Get A/D value=-858993460 result=40 11:57:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:14 Parameters OK 11:57:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:14 Set A/D data flow result=40 11:57:14 Set A/D channel type result=40 11:57:14 Set A/D encoding result=40 11:57:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:14 Set channel filter=0.000000e+000 result=40 11:57:14 Config A/D Result=40 11:57:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:14 Get A/D filter: -9.255963e+061 result=40 11:57:14 Get A/D value=-858993460 result=40 11:57:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:14 Aux= 11:57:14 Message to Camera, serial 123039 queued 11:57:50 Received message from Master: op=PointingHead serial=123051 11:57:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:57:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:57:50 Point started: ret=0 11:57:50 point_skyscan result=0 11:57:51 Check angles 11:57:51 SkyScan query 11:57:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:57:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:57:51 Message to Master queued w/err=0: serial=123051 error=0 11:57:56 Received message from Master: op=Filter serial=123052 11:57:56 Color wheel filter change from 0 to 0 11:57:56 FLIGetFilterPos err=0 currentPosition=0 11:57:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:56 Filter is already there-color wheel unchanged 11:57:56 Received message from Master: op=Shutter serial=123053 11:57:56 Shutter LASER close 11:57:56 Received message from Camera: op=State serial=123055 11:57:56 GetSingleValue result=40 Value=cccccccc 11:57:56 SkyScan query 11:57:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:57:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:57 Parameters OK 11:57:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:57 Set A/D data flow result=40 11:57:57 Set A/D channel type result=40 11:57:57 Set A/D encoding result=40 11:57:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:57 Set channel filter=0.000000e+000 result=40 11:57:57 Config A/D Result=40 11:57:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:57 Get A/D filter: -9.255963e+061 result=40 11:57:57 Get A/D value=-858993460 result=40 11:57:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:57 Parameters OK 11:57:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:57 Set A/D data flow result=40 11:57:57 Set A/D channel type result=40 11:57:57 Set A/D encoding result=40 11:57:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:57 Set channel filter=0.000000e+000 result=40 11:57:57 Config A/D Result=40 11:57:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:57 Get A/D filter: -9.255963e+061 result=40 11:57:57 Get A/D value=-858993460 result=40 11:57:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:57 Aux= 11:57:57 Message to Camera, serial 123055 queued 11:58:34 Received message from Master: op=PointingHead serial=123068 11:58:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:58:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:58:34 Point started: ret=0 11:58:34 point_skyscan result=0 11:58:35 Check angles 11:58:35 SkyScan query 11:58:36 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.64<-13576 Statuses=0008 0009 11:58:36 Msec=0 True Az=112.98 Ze=-23.64 Az status=0008 Ze status=0009 11:58:36 Check angles 11:58:36 SkyScan query 11:58:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 11:58:36 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 11:58:36 Check angles 11:58:36 SkyScan query 11:58:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.52<-16368 Statuses=0008 0009 11:58:37 Msec=1500 True Az=112.995 Ze=-65.52 Az status=0008 Ze status=0009 11:58:37 Check angles 11:58:37 SkyScan query 11:58:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.49<-17766 Statuses=0008 0009 11:58:38 Msec=2250 True Az=112.995 Ze=-86.49 Az status=0008 Ze status=0009 11:58:38 Check angles 11:58:38 SkyScan query 11:58:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.46<-19164 Statuses=0008 0009 11:58:39 Msec=3000 True Az=112.995 Ze=-107.46 Az status=0008 Ze status=0009 11:58:39 Check angles 11:58:39 SkyScan query 11:58:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.88<-20592 Statuses=0008 0009 11:58:39 Msec=3750 True Az=112.995 Ze=-128.88 Az status=0008 Ze status=0009 11:58:39 Check angles 11:58:39 SkyScan query 11:58:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.27<-22018 Statuses=0008 0009 11:58:40 Msec=4500 True Az=112.995 Ze=-150.27 Az status=0008 Ze status=0009 11:58:40 Check angles 11:58:40 SkyScan query 11:58:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.075<-23405 Statuses=0008 0009 11:58:41 Msec=5250 True Az=112.995 Ze=-171.075 Az status=0008 Ze status=0009 11:58:41 Check angles 11:58:41 SkyScan query 11:58:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:58:42 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:58:42 Message to Master queued w/err=0: serial=123068 error=0 11:58:47 Received message from Master: op=Filter serial=123069 11:58:47 Color wheel filter change from 0 to 0 11:58:47 FLIGetFilterPos err=0 currentPosition=0 11:58:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:58:47 Filter is already there-color wheel unchanged 11:58:47 Received message from Master: op=Shutter serial=123070 11:58:47 Shutter LASER open 11:58:47 Received message from Camera: op=State serial=123072 11:58:47 GetSingleValue result=40 Value=cccccccc 11:58:47 SkyScan query 11:58:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:58:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:47 Parameters OK 11:58:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:47 Set A/D data flow result=40 11:58:47 Set A/D channel type result=40 11:58:47 Set A/D encoding result=40 11:58:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:47 Set channel filter=0.000000e+000 result=40 11:58:47 Config A/D Result=40 11:58:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:47 Get A/D filter: -9.255963e+061 result=40 11:58:47 Get A/D value=-858993460 result=40 11:58:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:47 Parameters OK 11:58:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:47 Set A/D data flow result=40 11:58:47 Set A/D channel type result=40 11:58:47 Set A/D encoding result=40 11:58:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:47 Set channel filter=0.000000e+000 result=40 11:58:47 Config A/D Result=40 11:58:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:47 Get A/D filter: -9.255963e+061 result=40 11:58:47 Get A/D value=-858993460 result=40 11:58:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:58:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:58:47 Aux= 11:58:47 Message to Camera, serial 123072 queued 11:58:56 Received message from Master: op=Shutter serial=123082 11:58:56 Shutter LASER close 11:58:56 Received message from Master: op=PointingHead serial=123086 11:58:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:58:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:58:57 Point started: ret=0 11:58:57 point_skyscan result=0 11:58:58 Check angles 11:58:58 SkyScan query 11:58:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 11:58:58 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 11:58:58 Check angles 11:58:58 SkyScan query 11:58:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.505<-20167 Statuses=0008 0009 11:58:59 Msec=750 True Az=112.995 Ze=-122.505 Az status=0008 Ze status=0009 11:58:59 Check angles 11:58:59 SkyScan query 11:59:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.535<-18769 Statuses=0008 0009 11:59:00 Msec=1500 True Az=112.995 Ze=-101.535 Az status=0008 Ze status=0009 11:59:00 Check angles 11:59:00 SkyScan query 11:59:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.565<-17371 Statuses=0008 0009 11:59:00 Msec=2250 True Az=112.995 Ze=-80.565 Az status=0008 Ze status=0009 11:59:01 Check angles 11:59:01 SkyScan query 11:59:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.175<-15945 Statuses=0008 0009 11:59:01 Msec=3000 True Az=112.995 Ze=-59.175 Az status=0008 Ze status=0009 11:59:01 Check angles 11:59:01 SkyScan query 11:59:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.145<-14543 Statuses=0008 0009 11:59:02 Msec=3750 True Az=112.995 Ze=-38.145 Az status=0008 Ze status=0009 11:59:02 Check angles 11:59:02 SkyScan query 11:59:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.22<-13148 Statuses=0008 0009 11:59:03 Msec=4500 True Az=112.995 Ze=-17.22 Az status=0008 Ze status=0009 11:59:03 Check angles 11:59:03 SkyScan query 11:59:03 SkyScan query done: ret=0 az=112.995<-7533 ze=3.765<-11749 Statuses=0008 0009 11:59:03 Msec=5250 True Az=112.995 Ze=3.765 Az status=0008 Ze status=0009 11:59:04 Check angles 11:59:04 SkyScan query 11:59:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:59:04 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:59:04 Message to Master queued w/err=0: serial=123086 error=0 11:59:09 Received message from Master: op=Filter serial=123087 11:59:09 Color wheel filter change from 0 to 0 11:59:09 FLIGetFilterPos err=0 currentPosition=0 11:59:09 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:09 Filter is already there-color wheel unchanged 11:59:09 Received message from Master: op=Shutter serial=123088 11:59:09 Shutter LASER close 11:59:10 Received message from Camera: op=State serial=123090 11:59:10 GetSingleValue result=40 Value=cccccccc 11:59:10 SkyScan query 11:59:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:59:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:10 Parameters OK 11:59:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:10 Set A/D data flow result=40 11:59:10 Set A/D channel type result=40 11:59:10 Set A/D encoding result=40 11:59:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:10 Set channel filter=0.000000e+000 result=40 11:59:10 Config A/D Result=40 11:59:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:10 Get A/D filter: -9.255963e+061 result=40 11:59:10 Get A/D value=-858993460 result=40 11:59:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:10 Parameters OK 11:59:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:10 Set A/D data flow result=40 11:59:10 Set A/D channel type result=40 11:59:10 Set A/D encoding result=40 11:59:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:10 Set channel filter=0.000000e+000 result=40 11:59:10 Config A/D Result=40 11:59:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:10 Get A/D filter: -9.255963e+061 result=40 11:59:10 Get A/D value=-858993460 result=40 11:59:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:10 Aux= 11:59:10 Message to Camera, serial 123090 queued 11:59:47 Received message from Master: op=PointingHead serial=123103 11:59:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:59:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:59:47 Point started: ret=0 11:59:47 point_skyscan result=0 11:59:48 Check angles 11:59:48 SkyScan query 11:59:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:59:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:59:49 Message to Master queued w/err=0: serial=123103 error=0 11:59:54 Received message from Master: op=Filter serial=123104 11:59:54 Color wheel filter change from 0 to 0 11:59:54 FLIGetFilterPos err=0 currentPosition=0 11:59:54 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:54 Filter is already there-color wheel unchanged 11:59:54 Received message from Master: op=Shutter serial=123105 11:59:54 Shutter LASER close 11:59:54 Received message from Camera: op=State serial=123107 11:59:54 GetSingleValue result=40 Value=cccccccc 11:59:54 SkyScan query 11:59:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:59:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:54 Parameters OK 11:59:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:54 Set A/D data flow result=40 11:59:54 Set A/D channel type result=40 11:59:54 Set A/D encoding result=40 11:59:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:54 Set channel filter=0.000000e+000 result=40 11:59:54 Config A/D Result=40 11:59:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:54 Get A/D filter: -9.255963e+061 result=40 11:59:54 Get A/D value=-858993460 result=40 11:59:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:54 Parameters OK 11:59:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:54 Set A/D data flow result=40 11:59:54 Set A/D channel type result=40 11:59:54 Set A/D encoding result=40 11:59:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:54 Set channel filter=0.000000e+000 result=40 11:59:54 Config A/D Result=40 11:59:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:54 Get A/D filter: -9.255963e+061 result=40 11:59:54 Get A/D value=-858993460 result=40 11:59:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:54 Aux= 11:59:54 Message to Camera, serial 123107 queued 12:00:31 Received message from Master: op=PointingHead serial=123120 12:00:31 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:00:31 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:00:32 Point started: ret=0 12:00:32 point_skyscan result=0 12:00:32 Check angles 12:00:32 SkyScan query 12:00:33 SkyScan query done: ret=0 az=136.2<-9080 ze=-6.51<-12434 Statuses=0009 0008 12:00:33 Msec=0 True Az=136.2 Ze=-6.51 Az status=0009 Ze status=0008 12:00:33 Check angles 12:00:33 SkyScan query 12:00:34 SkyScan query done: ret=0 az=153.99<-10266 ze=-6.51<-12434 Statuses=0009 0008 12:00:34 Msec=750 True Az=153.99 Ze=-6.51 Az status=0009 Ze status=0008 12:00:34 Check angles 12:00:34 SkyScan query 12:00:34 SkyScan query done: ret=0 az=171.45<-11430 ze=-6.495<-12433 Statuses=0009 0008 12:00:34 Msec=1500 True Az=171.45 Ze=-6.495 Az status=0009 Ze status=0008 12:00:35 Check angles 12:00:35 SkyScan query 12:00:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:00:35 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:00:35 Message to Master queued w/err=0: serial=123120 error=0 12:00:40 Received message from Master: op=Filter serial=123121 12:00:40 Color wheel filter change from 0 to 0 12:00:40 FLIGetFilterPos err=0 currentPosition=0 12:00:40 FLIGetStepsRemaining err=0 RemainingSteps=0 12:00:40 Filter is already there-color wheel unchanged 12:00:40 Received message from Master: op=Shutter serial=123122 12:00:40 Shutter LASER close 12:00:40 Received message from Camera: op=State serial=123124 12:00:40 GetSingleValue result=40 Value=cccccccc 12:00:40 SkyScan query 12:00:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:00:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:41 Parameters OK 12:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:41 Set A/D data flow result=40 12:00:41 Set A/D channel type result=40 12:00:41 Set A/D encoding result=40 12:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:41 Set channel filter=0.000000e+000 result=40 12:00:41 Config A/D Result=40 12:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:41 Get A/D filter: -9.255963e+061 result=40 12:00:41 Get A/D value=-858993460 result=40 12:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:41 Parameters OK 12:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:41 Set A/D data flow result=40 12:00:41 Set A/D channel type result=40 12:00:41 Set A/D encoding result=40 12:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:41 Set channel filter=0.000000e+000 result=40 12:00:41 Config A/D Result=40 12:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:41 Get A/D filter: -9.255963e+061 result=40 12:00:41 Get A/D value=-858993460 result=40 12:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:00:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:00:41 Aux= 12:00:41 Message to Camera, serial 123124 queued 12:01:18 Received message from Master: op=PointingHead serial=123137 12:01:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:01:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:01:18 Point started: ret=0 12:01:18 point_skyscan result=0 12:01:19 Check angles 12:01:19 SkyScan query 12:01:19 SkyScan query done: ret=0 az=153<-10200 ze=6.51<-11566 Statuses=0009 0008 12:01:19 Msec=0 True Az=153 Ze=6.51 Az status=0009 Ze status=0008 12:01:20 Check angles 12:01:20 SkyScan query 12:01:20 SkyScan query done: ret=0 az=135.54<-9036 ze=6.495<-11567 Statuses=0009 0008 12:01:20 Msec=750 True Az=135.54 Ze=6.495 Az status=0009 Ze status=0008 12:01:20 Check angles 12:01:20 SkyScan query 12:01:21 SkyScan query done: ret=0 az=118.08<-7872 ze=6.495<-11567 Statuses=0009 0008 12:01:21 Msec=1500 True Az=118.08 Ze=6.495 Az status=0009 Ze status=0008 12:01:21 Check angles 12:01:21 SkyScan query 12:01:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:01:22 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:01:22 Message to Master queued w/err=0: serial=123137 error=0 12:01:27 Received message from Master: op=Filter serial=123138 12:01:27 Color wheel filter change from 0 to 0 12:01:27 FLIGetFilterPos err=0 currentPosition=0 12:01:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:01:27 Filter is already there-color wheel unchanged 12:01:27 Received message from Master: op=Shutter serial=123139 12:01:27 Shutter LASER close 12:01:27 Received message from Camera: op=State serial=123141 12:01:27 GetSingleValue result=40 Value=cccccccc 12:01:27 SkyScan query 12:01:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:01:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:27 Parameters OK 12:01:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:27 Set A/D data flow result=40 12:01:27 Set A/D channel type result=40 12:01:27 Set A/D encoding result=40 12:01:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:27 Set channel filter=0.000000e+000 result=40 12:01:27 Config A/D Result=40 12:01:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:27 Get A/D filter: -9.255963e+061 result=40 12:01:27 Get A/D value=-858993460 result=40 12:01:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:27 Parameters OK 12:01:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:27 Set A/D data flow result=40 12:01:27 Set A/D channel type result=40 12:01:27 Set A/D encoding result=40 12:01:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:27 Set channel filter=0.000000e+000 result=40 12:01:27 Config A/D Result=40 12:01:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:27 Get A/D filter: -9.255963e+061 result=40 12:01:27 Get A/D value=-858993460 result=40 12:01:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:01:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:01:27 Aux= 12:01:27 Message to Camera, serial 123141 queued 12:02:04 Received message from Master: op=PointingHead serial=123154 12:02:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:02:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:02:05 Point started: ret=0 12:02:05 point_skyscan result=0 12:02:05 Check angles 12:02:05 SkyScan query 12:02:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 12:02:06 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 12:02:06 Check angles 12:02:06 SkyScan query 12:02:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.22<-14948 Statuses=0008 0009 12:02:07 Msec=750 True Az=112.995 Ze=-44.22 Az status=0008 Ze status=0009 12:02:07 Check angles 12:02:07 SkyScan query 12:02:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.145<-16343 Statuses=0008 0009 12:02:08 Msec=1500 True Az=112.995 Ze=-65.145 Az status=0008 Ze status=0009 12:02:08 Check angles 12:02:08 SkyScan query 12:02:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.085<-17739 Statuses=0008 0009 12:02:08 Msec=2250 True Az=112.995 Ze=-86.085 Az status=0008 Ze status=0009 12:02:08 Check angles 12:02:08 SkyScan query 12:02:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.025<-19135 Statuses=0008 0009 12:02:09 Msec=3000 True Az=112.995 Ze=-107.025 Az status=0008 Ze status=0009 12:02:09 Check angles 12:02:09 SkyScan query 12:02:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.995<-20533 Statuses=0008 0009 12:02:10 Msec=3750 True Az=112.995 Ze=-127.995 Az status=0008 Ze status=0009 12:02:10 Check angles 12:02:10 SkyScan query 12:02:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.95<-21930 Statuses=0008 0009 12:02:11 Msec=4500 True Az=112.995 Ze=-148.95 Az status=0008 Ze status=0009 12:02:11 Check angles 12:02:11 SkyScan query 12:02:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.89<-23326 Statuses=0008 0009 12:02:11 Msec=5250 True Az=112.995 Ze=-169.89 Az status=0008 Ze status=0009 12:02:11 Check angles 12:02:11 SkyScan query 12:02:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:02:12 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:02:12 Message to Master queued w/err=0: serial=123154 error=0 12:02:17 Received message from Master: op=Filter serial=123155 12:02:17 Color wheel filter change from 0 to 0 12:02:17 FLIGetFilterPos err=0 currentPosition=0 12:02:17 FLIGetStepsRemaining err=0 RemainingSteps=0 12:02:17 Filter is already there-color wheel unchanged 12:02:17 Received message from Master: op=Shutter serial=123156 12:02:17 Shutter LASER open 12:02:17 Received message from Camera: op=State serial=123158 12:02:17 GetSingleValue result=40 Value=cccccccc 12:02:17 SkyScan query 12:02:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:02:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:18 Parameters OK 12:02:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:18 Set A/D data flow result=40 12:02:18 Set A/D channel type result=40 12:02:18 Set A/D encoding result=40 12:02:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:18 Set channel filter=0.000000e+000 result=40 12:02:18 Config A/D Result=40 12:02:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:18 Get A/D filter: -9.255963e+061 result=40 12:02:18 Get A/D value=-858993460 result=40 12:02:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:18 Parameters OK 12:02:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:18 Set A/D data flow result=40 12:02:18 Set A/D channel type result=40 12:02:18 Set A/D encoding result=40 12:02:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:18 Set channel filter=0.000000e+000 result=40 12:02:18 Config A/D Result=40 12:02:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:18 Get A/D filter: -9.255963e+061 result=40 12:02:18 Get A/D value=-858993460 result=40 12:02:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:02:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:02:18 Aux= 12:02:18 Message to Camera, serial 123158 queued 12:02:26 Received message from Master: op=Shutter serial=123168 12:02:26 Shutter LASER close 12:02:27 Received message from Master: op=PointingHead serial=123172 12:02:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:02:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:02:27 Point started: ret=0 12:02:27 point_skyscan result=0 12:02:28 Check angles 12:02:28 SkyScan query 12:02:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 12:02:29 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 12:02:29 Check angles 12:02:29 SkyScan query 12:02:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.71<-20114 Statuses=0008 0009 12:02:29 Msec=750 True Az=112.995 Ze=-121.71 Az status=0008 Ze status=0009 12:02:29 Check angles 12:02:29 SkyScan query 12:02:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.26<-18684 Statuses=0008 0009 12:02:30 Msec=1500 True Az=112.995 Ze=-100.26 Az status=0008 Ze status=0009 12:02:30 Check angles 12:02:30 SkyScan query 12:02:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.305<-17287 Statuses=0008 0009 12:02:31 Msec=2250 True Az=112.995 Ze=-79.305 Az status=0008 Ze status=0009 12:02:31 Check angles 12:02:31 SkyScan query 12:02:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.365<-15891 Statuses=0008 0009 12:02:32 Msec=3000 True Az=112.995 Ze=-58.365 Az status=0008 Ze status=0009 12:02:32 Check angles 12:02:32 SkyScan query 12:02:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.455<-14497 Statuses=0008 0009 12:02:32 Msec=3750 True Az=112.995 Ze=-37.455 Az status=0008 Ze status=0009 12:02:32 Check angles 12:02:32 SkyScan query 12:02:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.485<-13099 Statuses=0008 0009 12:02:33 Msec=4500 True Az=112.995 Ze=-16.485 Az status=0008 Ze status=0009 12:02:33 Check angles 12:02:33 SkyScan query 12:02:34 SkyScan query done: ret=0 az=113.01<-7534 ze=4.365<-11709 Statuses=0008 0009 12:02:34 Msec=5250 True Az=113.01 Ze=4.365 Az status=0008 Ze status=0009 12:02:34 Check angles 12:02:34 SkyScan query 12:02:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:02:35 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:02:35 Message to Master queued w/err=0: serial=123172 error=0 12:02:40 Received message from Master: op=Filter serial=123173 12:02:40 Color wheel filter change from 0 to 0 12:02:40 FLIGetFilterPos err=0 currentPosition=0 12:02:40 FLIGetStepsRemaining err=0 RemainingSteps=0 12:02:40 Filter is already there-color wheel unchanged 12:02:40 Received message from Master: op=Shutter serial=123174 12:02:40 Shutter LASER close 12:02:40 Received message from Camera: op=State serial=123176 12:02:40 GetSingleValue result=40 Value=cccccccc 12:02:40 SkyScan query 12:02:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:02:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:40 Parameters OK 12:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:40 Set A/D data flow result=40 12:02:40 Set A/D channel type result=40 12:02:40 Set A/D encoding result=40 12:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:40 Set channel filter=0.000000e+000 result=40 12:02:40 Config A/D Result=40 12:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:40 Get A/D filter: -9.255963e+061 result=40 12:02:40 Get A/D value=-858993460 result=40 12:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:40 Parameters OK 12:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:40 Set A/D data flow result=40 12:02:40 Set A/D channel type result=40 12:02:40 Set A/D encoding result=40 12:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:40 Set channel filter=0.000000e+000 result=40 12:02:40 Config A/D Result=40 12:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:40 Get A/D filter: -9.255963e+061 result=40 12:02:40 Get A/D value=-858993460 result=40 12:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:02:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:02:40 Aux= 12:02:40 Message to Camera, serial 123176 queued 12:03:17 Received message from Master: op=PointingHead serial=123189 12:03:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:03:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:03:18 Point started: ret=0 12:03:18 point_skyscan result=0 12:03:18 Check angles 12:03:18 SkyScan query 12:03:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:03:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:03:19 Message to Master queued w/err=0: serial=123189 error=0 12:03:24 Received message from Master: op=Filter serial=123190 12:03:24 Color wheel filter change from 0 to 0 12:03:24 FLIGetFilterPos err=0 currentPosition=0 12:03:24 FLIGetStepsRemaining err=0 RemainingSteps=0 12:03:24 Filter is already there-color wheel unchanged 12:03:24 Received message from Master: op=Shutter serial=123191 12:03:24 Shutter LASER close 12:03:24 Received message from Camera: op=State serial=123193 12:03:24 GetSingleValue result=40 Value=cccccccc 12:03:24 SkyScan query 12:03:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:03:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:25 Parameters OK 12:03:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:25 Set A/D data flow result=40 12:03:25 Set A/D channel type result=40 12:03:25 Set A/D encoding result=40 12:03:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:25 Set channel filter=0.000000e+000 result=40 12:03:25 Config A/D Result=40 12:03:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:25 Get A/D filter: -9.255963e+061 result=40 12:03:25 Get A/D value=-858993460 result=40 12:03:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:25 Parameters OK 12:03:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:25 Set A/D data flow result=40 12:03:25 Set A/D channel type result=40 12:03:25 Set A/D encoding result=40 12:03:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:25 Set channel filter=0.000000e+000 result=40 12:03:25 Config A/D Result=40 12:03:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:25 Get A/D filter: -9.255963e+061 result=40 12:03:25 Get A/D value=-858993460 result=40 12:03:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:03:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:03:25 Aux= 12:03:25 Message to Camera, serial 123193 queued 12:03:38 Received message from Master: op=Identify serial=123194 [UTC 2019-3-5 12:03:50] 12:04:01 Received message from Master: op=PointingHead serial=123208 12:04:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:04:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:04:01 Point started: ret=0 12:04:01 point_skyscan result=0 12:04:02 Check angles 12:04:02 SkyScan query 12:04:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:04:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:04:02 Message to Master queued w/err=0: serial=123208 error=0 12:04:07 Received message from Master: op=Filter serial=123209 12:04:07 Color wheel filter change from 0 to 0 12:04:07 FLIGetFilterPos err=0 currentPosition=0 12:04:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:07 Filter is already there-color wheel unchanged 12:04:07 Received message from Master: op=Shutter serial=123210 12:04:07 Shutter LASER close 12:04:08 Received message from Camera: op=State serial=123212 12:04:08 GetSingleValue result=40 Value=cccccccc 12:04:08 SkyScan query 12:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:04:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:08 Parameters OK 12:04:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:08 Set A/D data flow result=40 12:04:08 Set A/D channel type result=40 12:04:08 Set A/D encoding result=40 12:04:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:08 Set channel filter=0.000000e+000 result=40 12:04:08 Config A/D Result=40 12:04:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:08 Get A/D filter: -9.255963e+061 result=40 12:04:08 Get A/D value=-858993460 result=40 12:04:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:08 Parameters OK 12:04:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:08 Set A/D data flow result=40 12:04:08 Set A/D channel type result=40 12:04:08 Set A/D encoding result=40 12:04:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:08 Set channel filter=0.000000e+000 result=40 12:04:08 Config A/D Result=40 12:04:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:08 Get A/D filter: -9.255963e+061 result=40 12:04:08 Get A/D value=-858993460 result=40 12:04:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:04:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:04:08 Aux= 12:04:08 Message to Camera, serial 123212 queued 12:04:45 Received message from Master: op=PointingHead serial=123225 12:04:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:04:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:04:45 Point started: ret=0 12:04:45 point_skyscan result=0 12:04:46 Check angles 12:04:46 SkyScan query 12:04:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:04:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:04:47 Message to Master queued w/err=0: serial=123225 error=0 12:04:52 Received message from Master: op=Filter serial=123226 12:04:52 Color wheel filter change from 0 to 0 12:04:52 FLIGetFilterPos err=0 currentPosition=0 12:04:52 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:52 Filter is already there-color wheel unchanged 12:04:52 Received message from Master: op=Shutter serial=123227 12:04:52 Shutter LASER close 12:04:52 Received message from Camera: op=State serial=123229 12:04:52 GetSingleValue result=40 Value=cccccccc 12:04:52 SkyScan query 12:04:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:04:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:52 Parameters OK 12:04:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:52 Set A/D data flow result=40 12:04:52 Set A/D channel type result=40 12:04:52 Set A/D encoding result=40 12:04:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:52 Set channel filter=0.000000e+000 result=40 12:04:52 Config A/D Result=40 12:04:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:52 Get A/D filter: -9.255963e+061 result=40 12:04:52 Get A/D value=-858993460 result=40 12:04:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:52 Parameters OK 12:04:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:52 Set A/D data flow result=40 12:04:52 Set A/D channel type result=40 12:04:52 Set A/D encoding result=40 12:04:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:52 Set channel filter=0.000000e+000 result=40 12:04:52 Config A/D Result=40 12:04:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:52 Get A/D filter: -9.255963e+061 result=40 12:04:52 Get A/D value=-858993460 result=40 12:04:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:04:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:04:52 Aux= 12:04:52 Message to Camera, serial 123229 queued 12:05:29 Received message from Master: op=PointingHead serial=123242 12:05:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:05:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:05:30 Point started: ret=0 12:05:30 point_skyscan result=0 12:05:30 Check angles 12:05:30 SkyScan query 12:05:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 12:05:31 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 12:05:31 Check angles 12:05:31 SkyScan query 12:05:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.7<-14980 Statuses=0008 0009 12:05:32 Msec=750 True Az=112.995 Ze=-44.7 Az status=0008 Ze status=0009 12:05:32 Check angles 12:05:32 SkyScan query 12:05:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.105<-16407 Statuses=0008 0009 12:05:32 Msec=1500 True Az=112.995 Ze=-66.105 Az status=0008 Ze status=0009 12:05:33 Check angles 12:05:33 SkyScan query 12:05:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.075<-17805 Statuses=0008 0009 12:05:33 Msec=2250 True Az=112.995 Ze=-87.075 Az status=0008 Ze status=0009 12:05:33 Check angles 12:05:33 SkyScan query 12:05:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.495<-19233 Statuses=0008 0009 12:05:34 Msec=3000 True Az=112.995 Ze=-108.495 Az status=0008 Ze status=0009 12:05:34 Check angles 12:05:34 SkyScan query 12:05:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.825<-20655 Statuses=0008 0009 12:05:35 Msec=3750 True Az=112.995 Ze=-129.825 Az status=0008 Ze status=0009 12:05:35 Check angles 12:05:35 SkyScan query 12:05:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.735<-22049 Statuses=0008 0009 12:05:35 Msec=4500 True Az=112.995 Ze=-150.735 Az status=0008 Ze status=0009 12:05:36 Check angles 12:05:36 SkyScan query 12:05:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.435<-23429 Statuses=0008 0009 12:05:36 Msec=5250 True Az=112.995 Ze=-171.435 Az status=0008 Ze status=0009 12:05:36 Check angles 12:05:36 SkyScan query 12:05:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:05:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:05:37 Message to Master queued w/err=0: serial=123242 error=0 12:05:42 Received message from Master: op=Filter serial=123243 12:05:42 Color wheel filter change from 0 to 0 12:05:42 FLIGetFilterPos err=0 currentPosition=0 12:05:42 FLIGetStepsRemaining err=0 RemainingSteps=0 12:05:42 Filter is already there-color wheel unchanged 12:05:42 Received message from Master: op=Shutter serial=123244 12:05:42 Shutter LASER open 12:05:42 Received message from Camera: op=State serial=123246 12:05:42 GetSingleValue result=40 Value=cccccccc 12:05:42 SkyScan query 12:05:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:05:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:43 Parameters OK 12:05:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:43 Set A/D data flow result=40 12:05:43 Set A/D channel type result=40 12:05:43 Set A/D encoding result=40 12:05:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:43 Set channel filter=0.000000e+000 result=40 12:05:43 Config A/D Result=40 12:05:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:43 Get A/D filter: -9.255963e+061 result=40 12:05:43 Get A/D value=-858993460 result=40 12:05:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:43 Parameters OK 12:05:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:43 Set A/D data flow result=40 12:05:43 Set A/D channel type result=40 12:05:43 Set A/D encoding result=40 12:05:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:43 Set channel filter=0.000000e+000 result=40 12:05:43 Config A/D Result=40 12:05:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:43 Get A/D filter: -9.255963e+061 result=40 12:05:43 Get A/D value=-858993460 result=40 12:05:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:05:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:05:43 Aux= 12:05:43 Message to Camera, serial 123246 queued 12:05:51 Received message from Master: op=Shutter serial=123256 12:05:51 Shutter LASER close 12:05:52 Received message from Master: op=PointingHead serial=123260 12:05:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:05:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:05:52 Point started: ret=0 12:05:52 point_skyscan result=0 12:05:53 Check angles 12:05:53 SkyScan query 12:05:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 12:05:54 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 12:05:54 Check angles 12:05:54 SkyScan query 12:05:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.205<-20147 Statuses=0008 0009 12:05:54 Msec=750 True Az=112.995 Ze=-122.205 Az status=0008 Ze status=0009 12:05:54 Check angles 12:05:54 SkyScan query 12:05:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.28<-18752 Statuses=0008 0009 12:05:55 Msec=1500 True Az=112.995 Ze=-101.28 Az status=0008 Ze status=0009 12:05:55 Check angles 12:05:55 SkyScan query 12:05:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.295<-17353 Statuses=0008 0009 12:05:56 Msec=2250 True Az=112.995 Ze=-80.295 Az status=0008 Ze status=0009 12:05:56 Check angles 12:05:56 SkyScan query 12:05:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.355<-15957 Statuses=0008 0009 12:05:57 Msec=3000 True Az=112.995 Ze=-59.355 Az status=0008 Ze status=0009 12:05:57 Check angles 12:05:57 SkyScan query 12:05:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.325<-14555 Statuses=0008 0009 12:05:57 Msec=3750 True Az=112.995 Ze=-38.325 Az status=0008 Ze status=0009 12:05:57 Check angles 12:05:57 SkyScan query 12:05:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.385<-13159 Statuses=0008 0009 12:05:58 Msec=4500 True Az=112.995 Ze=-17.385 Az status=0008 Ze status=0009 12:05:58 Check angles 12:05:58 SkyScan query 12:05:59 SkyScan query done: ret=0 az=112.98<-7532 ze=3.585<-11761 Statuses=0008 0009 12:05:59 Msec=5250 True Az=112.98 Ze=3.585 Az status=0008 Ze status=0009 12:05:59 Check angles 12:05:59 SkyScan query 12:06:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:06:00 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:06:00 Message to Master queued w/err=0: serial=123260 error=0 12:06:05 Received message from Master: op=Filter serial=123261 12:06:05 Color wheel filter change from 0 to 0 12:06:05 FLIGetFilterPos err=0 currentPosition=0 12:06:05 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:05 Filter is already there-color wheel unchanged 12:06:05 Received message from Master: op=Shutter serial=123262 12:06:05 Shutter LASER close 12:06:05 Received message from Camera: op=State serial=123264 12:06:05 GetSingleValue result=40 Value=cccccccc 12:06:05 SkyScan query 12:06:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:06:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:05 Parameters OK 12:06:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:05 Set A/D data flow result=40 12:06:05 Set A/D channel type result=40 12:06:05 Set A/D encoding result=40 12:06:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:05 Set channel filter=0.000000e+000 result=40 12:06:05 Config A/D Result=40 12:06:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:05 Get A/D filter: -9.255963e+061 result=40 12:06:05 Get A/D value=-858993460 result=40 12:06:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:05 Parameters OK 12:06:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:05 Set A/D data flow result=40 12:06:05 Set A/D channel type result=40 12:06:05 Set A/D encoding result=40 12:06:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:05 Set channel filter=0.000000e+000 result=40 12:06:05 Config A/D Result=40 12:06:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:05 Get A/D filter: -9.255963e+061 result=40 12:06:05 Get A/D value=-858993460 result=40 12:06:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:05 Aux= 12:06:05 Message to Camera, serial 123264 queued 12:06:41 Received message from Master: op=PointingHead serial=123276 12:06:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:06:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:06:42 Point started: ret=0 12:06:42 point_skyscan result=0 12:06:42 Check angles 12:06:42 SkyScan query 12:06:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:06:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:06:43 Message to Master queued w/err=0: serial=123276 error=0 12:06:48 Received message from Master: op=Filter serial=123277 12:06:48 Color wheel filter change from 0 to 0 12:06:48 FLIGetFilterPos err=0 currentPosition=0 12:06:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:48 Filter is already there-color wheel unchanged 12:06:48 Received message from Master: op=Shutter serial=123278 12:06:48 Shutter LASER close 12:06:48 Received message from Camera: op=State serial=123280 12:06:48 GetSingleValue result=40 Value=cccccccc 12:06:48 SkyScan query 12:06:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:06:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:49 Parameters OK 12:06:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:49 Set A/D data flow result=40 12:06:49 Set A/D channel type result=40 12:06:49 Set A/D encoding result=40 12:06:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:49 Set channel filter=0.000000e+000 result=40 12:06:49 Config A/D Result=40 12:06:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:49 Get A/D filter: -9.255963e+061 result=40 12:06:49 Get A/D value=-858993460 result=40 12:06:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:49 Parameters OK 12:06:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:49 Set A/D data flow result=40 12:06:49 Set A/D channel type result=40 12:06:49 Set A/D encoding result=40 12:06:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:49 Set channel filter=0.000000e+000 result=40 12:06:49 Config A/D Result=40 12:06:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:49 Get A/D filter: -9.255963e+061 result=40 12:06:49 Get A/D value=-858993460 result=40 12:06:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:49 Aux= 12:06:49 Message to Camera, serial 123280 queued 12:07:26 Received message from Master: op=PointingHead serial=123293 12:07:26 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:07:26 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:07:26 Point started: ret=0 12:07:26 point_skyscan result=0 12:07:27 Check angles 12:07:27 SkyScan query 12:07:27 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 12:07:27 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 12:07:28 Check angles 12:07:28 SkyScan query 12:07:28 SkyScan query done: ret=0 az=153.555<-10237 ze=-6.495<-12433 Statuses=0009 0008 12:07:28 Msec=750 True Az=153.555 Ze=-6.495 Az status=0009 Ze status=0008 12:07:28 Check angles 12:07:28 SkyScan query 12:07:29 SkyScan query done: ret=0 az=171.375<-11425 ze=-6.495<-12433 Statuses=0009 0008 12:07:29 Msec=1500 True Az=171.375 Ze=-6.495 Az status=0009 Ze status=0008 12:07:29 Check angles 12:07:29 SkyScan query 12:07:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:07:30 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:07:30 Message to Master queued w/err=0: serial=123293 error=0 12:07:35 Received message from Master: op=Filter serial=123294 12:07:35 Color wheel filter change from 0 to 0 12:07:35 FLIGetFilterPos err=0 currentPosition=0 12:07:35 FLIGetStepsRemaining err=0 RemainingSteps=0 12:07:35 Filter is already there-color wheel unchanged 12:07:35 Received message from Master: op=Shutter serial=123295 12:07:35 Shutter LASER close 12:07:35 Received message from Camera: op=State serial=123297 12:07:35 GetSingleValue result=40 Value=cccccccc 12:07:35 SkyScan query 12:07:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:07:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:35 Parameters OK 12:07:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:35 Set A/D data flow result=40 12:07:35 Set A/D channel type result=40 12:07:35 Set A/D encoding result=40 12:07:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:35 Set channel filter=0.000000e+000 result=40 12:07:35 Config A/D Result=40 12:07:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:35 Get A/D filter: -9.255963e+061 result=40 12:07:35 Get A/D value=-858993460 result=40 12:07:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:35 Parameters OK 12:07:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:35 Set A/D data flow result=40 12:07:35 Set A/D channel type result=40 12:07:35 Set A/D encoding result=40 12:07:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:35 Set channel filter=0.000000e+000 result=40 12:07:35 Config A/D Result=40 12:07:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:35 Get A/D filter: -9.255963e+061 result=40 12:07:35 Get A/D value=-858993460 result=40 12:07:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:07:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:07:35 Aux= 12:07:35 Message to Camera, serial 123297 queued 12:08:12 Received message from Master: op=PointingHead serial=123310 12:08:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:08:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:08:13 Point started: ret=0 12:08:13 point_skyscan result=0 12:08:13 Check angles 12:08:13 SkyScan query 12:08:14 SkyScan query done: ret=0 az=152.82<-10188 ze=6.51<-11566 Statuses=0009 0008 12:08:14 Msec=0 True Az=152.82 Ze=6.51 Az status=0009 Ze status=0008 12:08:14 Check angles 12:08:14 SkyScan query 12:08:15 SkyScan query done: ret=0 az=135.465<-9031 ze=6.495<-11567 Statuses=0009 0008 12:08:15 Msec=750 True Az=135.465 Ze=6.495 Az status=0009 Ze status=0008 12:08:15 Check angles 12:08:15 SkyScan query 12:08:15 SkyScan query done: ret=0 az=117.99<-7866 ze=6.495<-11567 Statuses=0009 0008 12:08:15 Msec=1500 True Az=117.99 Ze=6.495 Az status=0009 Ze status=0008 12:08:16 Check angles 12:08:16 SkyScan query 12:08:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:08:16 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:08:16 Message to Master queued w/err=0: serial=123310 error=0 12:08:21 Received message from Master: op=Filter serial=123311 12:08:21 Color wheel filter change from 0 to 0 12:08:21 FLIGetFilterPos err=0 currentPosition=0 12:08:21 FLIGetStepsRemaining err=0 RemainingSteps=0 12:08:21 Filter is already there-color wheel unchanged 12:08:21 Received message from Master: op=Shutter serial=123312 12:08:21 Shutter LASER close 12:08:21 Received message from Camera: op=State serial=123314 12:08:21 GetSingleValue result=40 Value=cccccccc 12:08:21 SkyScan query 12:08:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:08:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:22 Parameters OK 12:08:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:22 Set A/D data flow result=40 12:08:22 Set A/D channel type result=40 12:08:22 Set A/D encoding result=40 12:08:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:22 Set channel filter=0.000000e+000 result=40 12:08:22 Config A/D Result=40 12:08:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:22 Get A/D filter: -9.255963e+061 result=40 12:08:22 Get A/D value=-858993460 result=40 12:08:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:22 Parameters OK 12:08:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:22 Set A/D data flow result=40 12:08:22 Set A/D channel type result=40 12:08:22 Set A/D encoding result=40 12:08:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:22 Set channel filter=0.000000e+000 result=40 12:08:22 Config A/D Result=40 12:08:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:22 Get A/D filter: -9.255963e+061 result=40 12:08:22 Get A/D value=-858993460 result=40 12:08:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:08:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:08:22 Aux= 12:08:22 Message to Camera, serial 123314 queued 12:08:59 Received message from Master: op=PointingHead serial=123327 12:08:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:08:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:08:59 Point started: ret=0 12:08:59 point_skyscan result=0 12:09:00 Check angles 12:09:00 SkyScan query 12:09:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 12:09:00 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 12:09:01 Check angles 12:09:01 SkyScan query 12:09:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.715<-14981 Statuses=0008 0009 12:09:01 Msec=750 True Az=112.995 Ze=-44.715 Az status=0008 Ze status=0009 12:09:01 Check angles 12:09:01 SkyScan query 12:09:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.655<-16377 Statuses=0008 0009 12:09:02 Msec=1500 True Az=112.995 Ze=-65.655 Az status=0008 Ze status=0009 12:09:02 Check angles 12:09:02 SkyScan query 12:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.745<-17783 Statuses=0008 0009 12:09:03 Msec=2250 True Az=112.995 Ze=-86.745 Az status=0008 Ze status=0009 12:09:03 Check angles 12:09:03 SkyScan query 12:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 12:09:03 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 12:09:04 Check angles 12:09:04 SkyScan query 12:09:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.565<-20571 Statuses=0008 0009 12:09:04 Msec=3750 True Az=112.995 Ze=-128.565 Az status=0008 Ze status=0009 12:09:04 Check angles 12:09:04 SkyScan query 12:09:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.58<-21972 Statuses=0008 0009 12:09:05 Msec=4500 True Az=112.995 Ze=-149.58 Az status=0008 Ze status=0009 12:09:05 Check angles 12:09:05 SkyScan query 12:09:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.49<-23366 Statuses=0008 0009 12:09:06 Msec=5250 True Az=112.995 Ze=-170.49 Az status=0008 Ze status=0009 12:09:06 Check angles 12:09:06 SkyScan query 12:09:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:09:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:09:06 Message to Master queued w/err=0: serial=123327 error=0 12:09:11 Received message from Master: op=Filter serial=123328 12:09:11 Color wheel filter change from 0 to 0 12:09:11 FLIGetFilterPos err=0 currentPosition=0 12:09:11 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:11 Filter is already there-color wheel unchanged 12:09:12 Received message from Master: op=Shutter serial=123329 12:09:12 Shutter LASER open 12:09:12 Received message from Camera: op=State serial=123331 12:09:12 GetSingleValue result=40 Value=cccccccc 12:09:12 SkyScan query 12:09:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:09:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:12 Parameters OK 12:09:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:12 Set A/D data flow result=40 12:09:12 Set A/D channel type result=40 12:09:12 Set A/D encoding result=40 12:09:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:12 Set channel filter=0.000000e+000 result=40 12:09:12 Config A/D Result=40 12:09:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:12 Get A/D filter: -9.255963e+061 result=40 12:09:12 Get A/D value=-858993460 result=40 12:09:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:12 Parameters OK 12:09:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:12 Set A/D data flow result=40 12:09:12 Set A/D channel type result=40 12:09:12 Set A/D encoding result=40 12:09:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:12 Set channel filter=0.000000e+000 result=40 12:09:12 Config A/D Result=40 12:09:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:12 Get A/D filter: -9.255963e+061 result=40 12:09:12 Get A/D value=-858993460 result=40 12:09:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:12 Aux= 12:09:12 Message to Camera, serial 123331 queued 12:09:21 Received message from Master: op=Shutter serial=123341 12:09:21 Shutter LASER close 12:09:21 Received message from Master: op=PointingHead serial=123345 12:09:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:09:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:09:22 Point started: ret=0 12:09:22 point_skyscan result=0 12:09:22 Check angles 12:09:22 SkyScan query 12:09:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 12:09:23 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 12:09:23 Check angles 12:09:23 SkyScan query 12:09:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 12:09:24 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 12:09:24 Check angles 12:09:24 SkyScan query 12:09:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.565<-18771 Statuses=0008 0009 12:09:24 Msec=1500 True Az=112.995 Ze=-101.565 Az status=0008 Ze status=0009 12:09:25 Check angles 12:09:25 SkyScan query 12:09:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.61<-17374 Statuses=0008 0009 12:09:25 Msec=2250 True Az=112.995 Ze=-80.61 Az status=0008 Ze status=0009 12:09:25 Check angles 12:09:25 SkyScan query 12:09:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.655<-15977 Statuses=0008 0009 12:09:26 Msec=3000 True Az=112.995 Ze=-59.655 Az status=0008 Ze status=0009 12:09:26 Check angles 12:09:26 SkyScan query 12:09:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.7<-14580 Statuses=0008 0009 12:09:27 Msec=3750 True Az=112.995 Ze=-38.7 Az status=0008 Ze status=0009 12:09:27 Check angles 12:09:27 SkyScan query 12:09:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.745<-13183 Statuses=0008 0009 12:09:27 Msec=4500 True Az=112.995 Ze=-17.745 Az status=0008 Ze status=0009 12:09:28 Check angles 12:09:28 SkyScan query 12:09:28 SkyScan query done: ret=0 az=112.98<-7532 ze=3.225<-11785 Statuses=0008 0009 12:09:28 Msec=5250 True Az=112.98 Ze=3.225 Az status=0008 Ze status=0009 12:09:28 Check angles 12:09:28 SkyScan query 12:09:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:09:29 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:09:29 Message to Master queued w/err=0: serial=123345 error=0 12:09:34 Received message from Master: op=Filter serial=123346 12:09:34 Color wheel filter change from 0 to 0 12:09:34 FLIGetFilterPos err=0 currentPosition=0 12:09:34 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:34 Filter is already there-color wheel unchanged 12:09:34 Received message from Master: op=Shutter serial=123347 12:09:34 Shutter LASER close 12:09:34 Received message from Camera: op=State serial=123349 12:09:34 GetSingleValue result=40 Value=cccccccc 12:09:34 SkyScan query 12:09:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:09:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:35 Parameters OK 12:09:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:35 Set A/D data flow result=40 12:09:35 Set A/D channel type result=40 12:09:35 Set A/D encoding result=40 12:09:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:35 Set channel filter=0.000000e+000 result=40 12:09:35 Config A/D Result=40 12:09:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:35 Get A/D filter: -9.255963e+061 result=40 12:09:35 Get A/D value=-858993460 result=40 12:09:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:35 Parameters OK 12:09:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:35 Set A/D data flow result=40 12:09:35 Set A/D channel type result=40 12:09:35 Set A/D encoding result=40 12:09:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:35 Set channel filter=0.000000e+000 result=40 12:09:35 Config A/D Result=40 12:09:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:35 Get A/D filter: -9.255963e+061 result=40 12:09:35 Get A/D value=-858993460 result=40 12:09:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:35 Aux= 12:09:35 Message to Camera, serial 123349 queued 12:10:12 Received message from Master: op=PointingHead serial=123362 12:10:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:10:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:10:12 Point started: ret=0 12:10:12 point_skyscan result=0 12:10:13 Check angles 12:10:13 SkyScan query 12:10:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:10:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:10:13 Message to Master queued w/err=0: serial=123362 error=0 12:10:18 Received message from Master: op=Filter serial=123363 12:10:18 Color wheel filter change from 0 to 0 12:10:18 FLIGetFilterPos err=0 currentPosition=0 12:10:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:10:18 Filter is already there-color wheel unchanged 12:10:19 Received message from Master: op=Shutter serial=123364 12:10:19 Shutter LASER close 12:10:19 Received message from Camera: op=State serial=123366 12:10:19 GetSingleValue result=40 Value=cccccccc 12:10:19 SkyScan query 12:10:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:10:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:19 Parameters OK 12:10:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:19 Set A/D data flow result=40 12:10:19 Set A/D channel type result=40 12:10:19 Set A/D encoding result=40 12:10:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:19 Set channel filter=0.000000e+000 result=40 12:10:19 Config A/D Result=40 12:10:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:19 Get A/D filter: -9.255963e+061 result=40 12:10:19 Get A/D value=-858993460 result=40 12:10:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:19 Parameters OK 12:10:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:19 Set A/D data flow result=40 12:10:19 Set A/D channel type result=40 12:10:19 Set A/D encoding result=40 12:10:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:19 Set channel filter=0.000000e+000 result=40 12:10:19 Config A/D Result=40 12:10:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:19 Get A/D filter: -9.255963e+061 result=40 12:10:19 Get A/D value=-858993460 result=40 12:10:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:10:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:10:19 Aux= 12:10:19 Message to Camera, serial 123366 queued 12:10:56 Received message from Master: op=PointingHead serial=123379 12:10:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:10:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:10:56 Point started: ret=0 12:10:56 point_skyscan result=0 12:10:57 Check angles 12:10:57 SkyScan query 12:10:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:10:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:10:58 Message to Master queued w/err=0: serial=123379 error=0 12:11:03 Received message from Master: op=Filter serial=123380 12:11:03 Color wheel filter change from 0 to 0 12:11:03 FLIGetFilterPos err=0 currentPosition=0 12:11:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:03 Filter is already there-color wheel unchanged 12:11:03 Received message from Master: op=Shutter serial=123381 12:11:03 Shutter LASER close 12:11:03 Received message from Camera: op=State serial=123383 12:11:03 GetSingleValue result=40 Value=cccccccc 12:11:03 SkyScan query 12:11:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:11:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:03 Parameters OK 12:11:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:03 Set A/D data flow result=40 12:11:03 Set A/D channel type result=40 12:11:03 Set A/D encoding result=40 12:11:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:03 Set channel filter=0.000000e+000 result=40 12:11:03 Config A/D Result=40 12:11:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:03 Get A/D filter: -9.255963e+061 result=40 12:11:03 Get A/D value=-858993460 result=40 12:11:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:03 Parameters OK 12:11:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:03 Set A/D data flow result=40 12:11:03 Set A/D channel type result=40 12:11:03 Set A/D encoding result=40 12:11:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:03 Set channel filter=0.000000e+000 result=40 12:11:03 Config A/D Result=40 12:11:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:03 Get A/D filter: -9.255963e+061 result=40 12:11:03 Get A/D value=-858993460 result=40 12:11:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:03 Aux= 12:11:03 Message to Camera, serial 123383 queued 12:11:39 Received message from Master: op=PointingHead serial=123395 12:11:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:11:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:11:40 Point started: ret=0 12:11:40 point_skyscan result=0 12:11:40 Check angles 12:11:40 SkyScan query 12:11:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:11:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:11:41 Message to Master queued w/err=0: serial=123395 error=0 12:11:46 Received message from Master: op=Filter serial=123396 12:11:46 Color wheel filter change from 0 to 0 12:11:46 FLIGetFilterPos err=0 currentPosition=0 12:11:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:46 Filter is already there-color wheel unchanged 12:11:46 Received message from Master: op=Shutter serial=123397 12:11:46 Shutter LASER close 12:11:46 Received message from Camera: op=State serial=123399 12:11:46 GetSingleValue result=40 Value=cccccccc 12:11:46 SkyScan query 12:11:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:11:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:47 Parameters OK 12:11:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:47 Set A/D data flow result=40 12:11:47 Set A/D channel type result=40 12:11:47 Set A/D encoding result=40 12:11:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:47 Set channel filter=0.000000e+000 result=40 12:11:47 Config A/D Result=40 12:11:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:47 Get A/D filter: -9.255963e+061 result=40 12:11:47 Get A/D value=-858993460 result=40 12:11:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:47 Parameters OK 12:11:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:47 Set A/D data flow result=40 12:11:47 Set A/D channel type result=40 12:11:47 Set A/D encoding result=40 12:11:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:47 Set channel filter=0.000000e+000 result=40 12:11:47 Config A/D Result=40 12:11:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:47 Get A/D filter: -9.255963e+061 result=40 12:11:47 Get A/D value=-858993460 result=40 12:11:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:47 Aux= 12:11:47 Message to Camera, serial 123399 queued 12:12:24 Received message from Master: op=PointingHead serial=123412 12:12:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:12:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:12:24 Point started: ret=0 12:12:24 point_skyscan result=0 12:12:25 Check angles 12:12:25 SkyScan query 12:12:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.505<-13567 Statuses=0008 0009 12:12:25 Msec=0 True Az=112.995 Ze=-23.505 Az status=0008 Ze status=0009 12:12:26 Check angles 12:12:26 SkyScan query 12:12:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.865<-14991 Statuses=0008 0009 12:12:26 Msec=750 True Az=112.995 Ze=-44.865 Az status=0008 Ze status=0009 12:12:26 Check angles 12:12:26 SkyScan query 12:12:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.835<-16389 Statuses=0008 0009 12:12:27 Msec=1500 True Az=112.995 Ze=-65.835 Az status=0008 Ze status=0009 12:12:27 Check angles 12:12:27 SkyScan query 12:12:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.805<-17787 Statuses=0008 0009 12:12:28 Msec=2250 True Az=112.995 Ze=-86.805 Az status=0008 Ze status=0009 12:12:28 Check angles 12:12:28 SkyScan query 12:12:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.775<-19185 Statuses=0008 0009 12:12:28 Msec=3000 True Az=112.995 Ze=-107.775 Az status=0008 Ze status=0009 12:12:29 Check angles 12:12:29 SkyScan query 12:12:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.73<-20582 Statuses=0008 0009 12:12:29 Msec=3750 True Az=112.995 Ze=-128.73 Az status=0008 Ze status=0009 12:12:29 Check angles 12:12:29 SkyScan query 12:12:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.135<-22009 Statuses=0008 0009 12:12:30 Msec=4500 True Az=112.995 Ze=-150.135 Az status=0008 Ze status=0009 12:12:30 Check angles 12:12:30 SkyScan query 12:12:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.97<-23398 Statuses=0008 0009 12:12:31 Msec=5250 True Az=112.995 Ze=-170.97 Az status=0008 Ze status=0009 12:12:31 Check angles 12:12:31 SkyScan query 12:12:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:12:31 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:12:31 Message to Master queued w/err=0: serial=123412 error=0 12:12:36 Received message from Master: op=Filter serial=123413 12:12:36 Color wheel filter change from 0 to 0 12:12:36 FLIGetFilterPos err=0 currentPosition=0 12:12:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:12:36 Filter is already there-color wheel unchanged 12:12:37 Received message from Master: op=Shutter serial=123414 12:12:37 Shutter LASER open 12:12:37 Received message from Camera: op=State serial=123416 12:12:37 GetSingleValue result=40 Value=cccccccc 12:12:37 SkyScan query 12:12:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:12:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:37 Parameters OK 12:12:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:37 Set A/D data flow result=40 12:12:37 Set A/D channel type result=40 12:12:37 Set A/D encoding result=40 12:12:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:37 Set channel filter=0.000000e+000 result=40 12:12:37 Config A/D Result=40 12:12:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:37 Get A/D filter: -9.255963e+061 result=40 12:12:37 Get A/D value=-858993460 result=40 12:12:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:37 Parameters OK 12:12:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:37 Set A/D data flow result=40 12:12:37 Set A/D channel type result=40 12:12:37 Set A/D encoding result=40 12:12:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:37 Set channel filter=0.000000e+000 result=40 12:12:37 Config A/D Result=40 12:12:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:37 Get A/D filter: -9.255963e+061 result=40 12:12:37 Get A/D value=-858993460 result=40 12:12:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:12:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:12:37 Aux= 12:12:37 Message to Camera, serial 123416 queued 12:12:46 Received message from Master: op=Shutter serial=123426 12:12:46 Shutter LASER close 12:12:46 Received message from Master: op=PointingHead serial=123430 12:12:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:12:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:12:47 Point started: ret=0 12:12:47 point_skyscan result=0 12:12:47 Check angles 12:12:47 SkyScan query 12:12:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 12:12:48 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 12:12:48 Check angles 12:12:48 SkyScan query 12:12:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.16<-20144 Statuses=0008 0009 12:12:49 Msec=750 True Az=112.995 Ze=-122.16 Az status=0008 Ze status=0009 12:12:49 Check angles 12:12:49 SkyScan query 12:12:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.74<-18716 Statuses=0008 0009 12:12:50 Msec=1500 True Az=112.995 Ze=-100.74 Az status=0008 Ze status=0009 12:12:50 Check angles 12:12:50 SkyScan query 12:12:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.785<-17319 Statuses=0008 0009 12:12:50 Msec=2250 True Az=112.995 Ze=-79.785 Az status=0008 Ze status=0009 12:12:50 Check angles 12:12:50 SkyScan query 12:12:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.83<-15922 Statuses=0008 0009 12:12:51 Msec=3000 True Az=112.995 Ze=-58.83 Az status=0008 Ze status=0009 12:12:51 Check angles 12:12:51 SkyScan query 12:12:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.455<-14497 Statuses=0008 0009 12:12:52 Msec=3750 True Az=112.995 Ze=-37.455 Az status=0008 Ze status=0009 12:12:52 Check angles 12:12:52 SkyScan query 12:12:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.47<-13098 Statuses=0008 0009 12:12:53 Msec=4500 True Az=112.995 Ze=-16.47 Az status=0008 Ze status=0009 12:12:53 Check angles 12:12:53 SkyScan query 12:12:53 SkyScan query done: ret=0 az=113.01<-7534 ze=4.38<-11708 Statuses=0008 0009 12:12:53 Msec=5250 True Az=113.01 Ze=4.38 Az status=0008 Ze status=0009 12:12:53 Check angles 12:12:53 SkyScan query 12:12:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:12:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:12:54 Message to Master queued w/err=0: serial=123430 error=0 12:12:59 Received message from Master: op=Filter serial=123431 12:12:59 Color wheel filter change from 0 to 0 12:12:59 FLIGetFilterPos err=0 currentPosition=0 12:12:59 FLIGetStepsRemaining err=0 RemainingSteps=0 12:12:59 Filter is already there-color wheel unchanged 12:12:59 Received message from Master: op=Shutter serial=123432 12:12:59 Shutter LASER close 12:12:59 Received message from Camera: op=State serial=123434 12:12:59 GetSingleValue result=40 Value=cccccccc 12:12:59 SkyScan query 12:13:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:13:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:00 Parameters OK 12:13:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:00 Set A/D data flow result=40 12:13:00 Set A/D channel type result=40 12:13:00 Set A/D encoding result=40 12:13:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:00 Set channel filter=0.000000e+000 result=40 12:13:00 Config A/D Result=40 12:13:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:00 Get A/D filter: -9.255963e+061 result=40 12:13:00 Get A/D value=-858993460 result=40 12:13:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:00 Parameters OK 12:13:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:00 Set A/D data flow result=40 12:13:00 Set A/D channel type result=40 12:13:00 Set A/D encoding result=40 12:13:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:00 Set channel filter=0.000000e+000 result=40 12:13:00 Config A/D Result=40 12:13:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:00 Get A/D filter: -9.255963e+061 result=40 12:13:00 Get A/D value=-858993460 result=40 12:13:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:00 Aux= 12:13:00 Message to Camera, serial 123434 queued 12:13:37 Received message from Master: op=PointingHead serial=123447 12:13:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:13:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:13:37 Point started: ret=0 12:13:37 point_skyscan result=0 12:13:38 Check angles 12:13:38 SkyScan query 12:13:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:13:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:13:38 Message to Master queued w/err=0: serial=123447 error=0 12:13:43 Received message from Master: op=Filter serial=123448 12:13:43 Color wheel filter change from 0 to 0 12:13:43 FLIGetFilterPos err=0 currentPosition=0 12:13:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:43 Filter is already there-color wheel unchanged 12:13:44 Received message from Master: op=Shutter serial=123449 12:13:44 Shutter LASER close 12:13:44 Received message from Camera: op=State serial=123451 12:13:44 GetSingleValue result=40 Value=cccccccc 12:13:44 SkyScan query 12:13:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:13:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:44 Parameters OK 12:13:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:44 Set A/D data flow result=40 12:13:44 Set A/D channel type result=40 12:13:44 Set A/D encoding result=40 12:13:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:44 Set channel filter=0.000000e+000 result=40 12:13:44 Config A/D Result=40 12:13:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:44 Get A/D filter: -9.255963e+061 result=40 12:13:44 Get A/D value=-858993460 result=40 12:13:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:44 Parameters OK 12:13:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:44 Set A/D data flow result=40 12:13:44 Set A/D channel type result=40 12:13:44 Set A/D encoding result=40 12:13:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:44 Set channel filter=0.000000e+000 result=40 12:13:44 Config A/D Result=40 12:13:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:44 Get A/D filter: -9.255963e+061 result=40 12:13:44 Get A/D value=-858993460 result=40 12:13:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:44 Aux= 12:13:44 Message to Camera, serial 123451 queued 12:14:21 Received message from Master: op=PointingHead serial=123464 12:14:21 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:14:21 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:14:21 Point started: ret=0 12:14:21 point_skyscan result=0 12:14:22 Check angles 12:14:22 SkyScan query 12:14:23 SkyScan query done: ret=0 az=136.155<-9077 ze=-6.51<-12434 Statuses=0009 0008 12:14:23 Msec=0 True Az=136.155 Ze=-6.51 Az status=0009 Ze status=0008 12:14:23 Check angles 12:14:23 SkyScan query 12:14:24 SkyScan query done: ret=0 az=153.945<-10263 ze=-6.495<-12433 Statuses=0009 0008 [UTC 2019-3-5 12:14:24] 12:14:24 Msec=750 True Az=153.945 Ze=-6.495 Az status=0009 Ze status=0008 12:14:24 Check angles 12:14:24 SkyScan query 12:14:24 SkyScan query done: ret=0 az=171.795<-11453 ze=-6.495<-12433 Statuses=0009 0008 12:14:24 Msec=1500 True Az=171.795 Ze=-6.495 Az status=0009 Ze status=0008 12:14:24 Check angles 12:14:24 SkyScan query 12:14:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:14:25 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:14:25 Message to Master queued w/err=0: serial=123464 error=0 12:14:30 Received message from Master: op=Filter serial=123465 12:14:30 Color wheel filter change from 0 to 0 12:14:30 FLIGetFilterPos err=0 currentPosition=0 12:14:30 FLIGetStepsRemaining err=0 RemainingSteps=0 12:14:30 Filter is already there-color wheel unchanged 12:14:30 Received message from Master: op=Shutter serial=123466 12:14:30 Shutter LASER close 12:14:30 Received message from Camera: op=State serial=123468 12:14:30 GetSingleValue result=40 Value=cccccccc 12:14:30 SkyScan query 12:14:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:14:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:31 Parameters OK 12:14:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:31 Set A/D data flow result=40 12:14:31 Set A/D channel type result=40 12:14:31 Set A/D encoding result=40 12:14:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:31 Set channel filter=0.000000e+000 result=40 12:14:31 Config A/D Result=40 12:14:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:31 Get A/D filter: -9.255963e+061 result=40 12:14:31 Get A/D value=-858993460 result=40 12:14:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:31 Parameters OK 12:14:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:31 Set A/D data flow result=40 12:14:31 Set A/D channel type result=40 12:14:31 Set A/D encoding result=40 12:14:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:31 Set channel filter=0.000000e+000 result=40 12:14:31 Config A/D Result=40 12:14:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:31 Get A/D filter: -9.255963e+061 result=40 12:14:31 Get A/D value=-858993460 result=40 12:14:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:14:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:14:31 Aux= 12:14:31 Message to Camera, serial 123468 queued 12:15:08 Received message from Master: op=PointingHead serial=123481 12:15:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:15:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:15:08 Point started: ret=0 12:15:08 point_skyscan result=0 12:15:09 Check angles 12:15:09 SkyScan query 12:15:09 SkyScan query done: ret=0 az=153.075<-10205 ze=6.51<-11566 Statuses=0009 0008 12:15:09 Msec=0 True Az=153.075 Ze=6.51 Az status=0009 Ze status=0008 12:15:09 Check angles 12:15:09 SkyScan query 12:15:10 SkyScan query done: ret=0 az=135.615<-9041 ze=6.495<-11567 Statuses=0009 0008 12:15:10 Msec=750 True Az=135.615 Ze=6.495 Az status=0009 Ze status=0008 12:15:10 Check angles 12:15:10 SkyScan query 12:15:11 SkyScan query done: ret=0 az=118.14<-7876 ze=6.495<-11567 Statuses=0009 0008 12:15:11 Msec=1500 True Az=118.14 Ze=6.495 Az status=0009 Ze status=0008 12:15:11 Check angles 12:15:11 SkyScan query 12:15:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:15:12 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:15:12 Message to Master queued w/err=0: serial=123481 error=0 12:15:17 Received message from Master: op=Filter serial=123482 12:15:17 Color wheel filter change from 0 to 0 12:15:17 FLIGetFilterPos err=0 currentPosition=0 12:15:17 FLIGetStepsRemaining err=0 RemainingSteps=0 12:15:17 Filter is already there-color wheel unchanged 12:15:17 Received message from Master: op=Shutter serial=123483 12:15:17 Shutter LASER close 12:15:17 Received message from Camera: op=State serial=123485 12:15:17 GetSingleValue result=40 Value=cccccccc 12:15:17 SkyScan query 12:15:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:15:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:17 Parameters OK 12:15:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:17 Set A/D data flow result=40 12:15:17 Set A/D channel type result=40 12:15:17 Set A/D encoding result=40 12:15:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:17 Set channel filter=0.000000e+000 result=40 12:15:17 Config A/D Result=40 12:15:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:17 Get A/D filter: -9.255963e+061 result=40 12:15:17 Get A/D value=-858993460 result=40 12:15:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:17 Parameters OK 12:15:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:17 Set A/D data flow result=40 12:15:17 Set A/D channel type result=40 12:15:17 Set A/D encoding result=40 12:15:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:17 Set channel filter=0.000000e+000 result=40 12:15:17 Config A/D Result=40 12:15:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:17 Get A/D filter: -9.255963e+061 result=40 12:15:17 Get A/D value=-858993460 result=40 12:15:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:15:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:15:17 Aux= 12:15:17 Message to Camera, serial 123485 queued 12:15:54 Received message from Master: op=PointingHead serial=123498 12:15:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:15:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:15:55 Point started: ret=0 12:15:55 point_skyscan result=0 12:15:55 Check angles 12:15:55 SkyScan query 12:15:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 12:15:56 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 12:15:56 Check angles 12:15:56 SkyScan query 12:15:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.03<-15002 Statuses=0008 0009 12:15:57 Msec=750 True Az=112.995 Ze=-45.03 Az status=0008 Ze status=0009 12:15:57 Check angles 12:15:57 SkyScan query 12:15:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.51<-16434 Statuses=0008 0009 12:15:57 Msec=1500 True Az=112.995 Ze=-66.51 Az status=0008 Ze status=0009 12:15:58 Check angles 12:15:58 SkyScan query 12:15:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.465<-17831 Statuses=0008 0009 12:15:58 Msec=2250 True Az=112.995 Ze=-87.465 Az status=0008 Ze status=0009 12:15:58 Check angles 12:15:58 SkyScan query 12:15:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.405<-19227 Statuses=0008 0009 12:15:59 Msec=3000 True Az=112.995 Ze=-108.405 Az status=0008 Ze status=0009 12:15:59 Check angles 12:15:59 SkyScan query 12:16:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.33<-20622 Statuses=0008 0009 12:16:00 Msec=3750 True Az=112.995 Ze=-129.33 Az status=0008 Ze status=0009 12:16:00 Check angles 12:16:00 SkyScan query 12:16:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.255<-22017 Statuses=0008 0009 12:16:00 Msec=4500 True Az=112.995 Ze=-150.255 Az status=0008 Ze status=0009 12:16:01 Check angles 12:16:01 SkyScan query 12:16:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.06<-23404 Statuses=0008 0009 12:16:01 Msec=5250 True Az=112.995 Ze=-171.06 Az status=0008 Ze status=0009 12:16:01 Check angles 12:16:01 SkyScan query 12:16:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:16:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:16:02 Message to Master queued w/err=0: serial=123498 error=0 12:16:07 Received message from Master: op=Filter serial=123499 12:16:07 Color wheel filter change from 0 to 0 12:16:07 FLIGetFilterPos err=0 currentPosition=0 12:16:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:16:07 Filter is already there-color wheel unchanged 12:16:07 Received message from Master: op=Shutter serial=123500 12:16:07 Shutter LASER open 12:16:07 Received message from Camera: op=State serial=123502 12:16:07 GetSingleValue result=40 Value=cccccccc 12:16:07 SkyScan query 12:16:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:16:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:08 Parameters OK 12:16:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:08 Set A/D data flow result=40 12:16:08 Set A/D channel type result=40 12:16:08 Set A/D encoding result=40 12:16:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:08 Set channel filter=0.000000e+000 result=40 12:16:08 Config A/D Result=40 12:16:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:08 Get A/D filter: -9.255963e+061 result=40 12:16:08 Get A/D value=-858993460 result=40 12:16:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:08 Parameters OK 12:16:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:08 Set A/D data flow result=40 12:16:08 Set A/D channel type result=40 12:16:08 Set A/D encoding result=40 12:16:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:08 Set channel filter=0.000000e+000 result=40 12:16:08 Config A/D Result=40 12:16:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:08 Get A/D filter: -9.255963e+061 result=40 12:16:08 Get A/D value=-858993460 result=40 12:16:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:16:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:16:08 Aux= 12:16:08 Message to Camera, serial 123502 queued 12:16:16 Received message from Master: op=Shutter serial=123512 12:16:16 Shutter LASER close 12:16:17 Received message from Master: op=PointingHead serial=123516 12:16:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:16:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:16:17 Point started: ret=0 12:16:17 point_skyscan result=0 12:16:18 Check angles 12:16:18 SkyScan query 12:16:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.04<-21536 Statuses=0008 0009 12:16:18 Msec=0 True Az=112.995 Ze=-143.04 Az status=0008 Ze status=0009 12:16:19 Check angles 12:16:19 SkyScan query 12:16:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 12:16:19 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 12:16:19 Check angles 12:16:19 SkyScan query 12:16:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 12:16:20 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 12:16:20 Check angles 12:16:20 SkyScan query 12:16:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.16<-17344 Statuses=0008 0009 12:16:21 Msec=2250 True Az=112.995 Ze=-80.16 Az status=0008 Ze status=0009 12:16:21 Check angles 12:16:21 SkyScan query 12:16:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 12:16:21 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 12:16:22 Check angles 12:16:22 SkyScan query 12:16:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.175<-14545 Statuses=0008 0009 12:16:22 Msec=3750 True Az=112.995 Ze=-38.175 Az status=0008 Ze status=0009 12:16:22 Check angles 12:16:22 SkyScan query 12:16:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.235<-13149 Statuses=0008 0009 12:16:23 Msec=4500 True Az=112.995 Ze=-17.235 Az status=0008 Ze status=0009 12:16:23 Check angles 12:16:23 SkyScan query 12:16:24 SkyScan query done: ret=0 az=112.995<-7533 ze=3.735<-11751 Statuses=0008 0009 12:16:24 Msec=5250 True Az=112.995 Ze=3.735 Az status=0008 Ze status=0009 12:16:24 Check angles 12:16:24 SkyScan query 12:16:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:16:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:16:24 Message to Master queued w/err=0: serial=123516 error=0 12:16:29 Received message from Master: op=Filter serial=123517 12:16:29 Color wheel filter change from 0 to 0 12:16:29 FLIGetFilterPos err=0 currentPosition=0 12:16:29 FLIGetStepsRemaining err=0 RemainingSteps=0 12:16:29 Filter is already there-color wheel unchanged 12:16:30 Received message from Master: op=Shutter serial=123518 12:16:30 Shutter LASER close 12:16:30 Received message from Camera: op=State serial=123520 12:16:30 GetSingleValue result=40 Value=cccccccc 12:16:30 SkyScan query 12:16:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:16:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:30 Parameters OK 12:16:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:30 Set A/D data flow result=40 12:16:30 Set A/D channel type result=40 12:16:30 Set A/D encoding result=40 12:16:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:30 Set channel filter=0.000000e+000 result=40 12:16:30 Config A/D Result=40 12:16:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:30 Get A/D filter: -9.255963e+061 result=40 12:16:30 Get A/D value=-858993460 result=40 12:16:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:30 Parameters OK 12:16:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:30 Set A/D data flow result=40 12:16:30 Set A/D channel type result=40 12:16:30 Set A/D encoding result=40 12:16:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:30 Set channel filter=0.000000e+000 result=40 12:16:30 Config A/D Result=40 12:16:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:30 Get A/D filter: -9.255963e+061 result=40 12:16:30 Get A/D value=-858993460 result=40 12:16:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:16:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:16:30 Aux= 12:16:30 Message to Camera, serial 123520 queued 12:17:07 Received message from Master: op=PointingHead serial=123533 12:17:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:17:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:17:08 Point started: ret=0 12:17:08 point_skyscan result=0 12:17:08 Check angles 12:17:08 SkyScan query 12:17:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:17:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:17:09 Message to Master queued w/err=0: serial=123533 error=0 12:17:14 Received message from Master: op=Filter serial=123534 12:17:14 Color wheel filter change from 0 to 0 12:17:14 FLIGetFilterPos err=0 currentPosition=0 12:17:14 FLIGetStepsRemaining err=0 RemainingSteps=0 12:17:14 Filter is already there-color wheel unchanged 12:17:14 Received message from Master: op=Shutter serial=123535 12:17:14 Shutter LASER close 12:17:14 Received message from Camera: op=State serial=123537 12:17:14 GetSingleValue result=40 Value=cccccccc 12:17:14 SkyScan query 12:17:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:17:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:15 Parameters OK 12:17:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:15 Set A/D data flow result=40 12:17:15 Set A/D channel type result=40 12:17:15 Set A/D encoding result=40 12:17:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:15 Set channel filter=0.000000e+000 result=40 12:17:15 Config A/D Result=40 12:17:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:15 Get A/D filter: -9.255963e+061 result=40 12:17:15 Get A/D value=-858993460 result=40 12:17:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:15 Parameters OK 12:17:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:15 Set A/D data flow result=40 12:17:15 Set A/D channel type result=40 12:17:15 Set A/D encoding result=40 12:17:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:15 Set channel filter=0.000000e+000 result=40 12:17:15 Config A/D Result=40 12:17:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:15 Get A/D filter: -9.255963e+061 result=40 12:17:15 Get A/D value=-858993460 result=40 12:17:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:17:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:17:15 Aux= 12:17:15 Message to Camera, serial 123537 queued 12:17:51 Received message from Master: op=PointingHead serial=123550 12:17:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:17:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:17:52 Point started: ret=0 12:17:52 point_skyscan result=0 12:17:53 Check angles 12:17:53 SkyScan query 12:17:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:17:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:17:53 Message to Master queued w/err=0: serial=123550 error=0 12:17:58 Received message from Master: op=Filter serial=123551 12:17:58 Color wheel filter change from 0 to 0 12:17:58 FLIGetFilterPos err=0 currentPosition=0 12:17:58 FLIGetStepsRemaining err=0 RemainingSteps=0 12:17:58 Filter is already there-color wheel unchanged 12:17:58 Received message from Master: op=Shutter serial=123552 12:17:58 Shutter LASER close 12:17:58 Received message from Camera: op=State serial=123554 12:17:58 GetSingleValue result=40 Value=cccccccc 12:17:58 SkyScan query 12:17:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:17:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:59 Parameters OK 12:17:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:59 Set A/D data flow result=40 12:17:59 Set A/D channel type result=40 12:17:59 Set A/D encoding result=40 12:17:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:59 Set channel filter=0.000000e+000 result=40 12:17:59 Config A/D Result=40 12:17:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:59 Get A/D filter: -9.255963e+061 result=40 12:17:59 Get A/D value=-858993460 result=40 12:17:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:59 Parameters OK 12:17:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:59 Set A/D data flow result=40 12:17:59 Set A/D channel type result=40 12:17:59 Set A/D encoding result=40 12:17:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:59 Set channel filter=0.000000e+000 result=40 12:17:59 Config A/D Result=40 12:17:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:59 Get A/D filter: -9.255963e+061 result=40 12:17:59 Get A/D value=-858993460 result=40 12:17:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:17:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:17:59 Aux= 12:17:59 Message to Camera, serial 123554 queued 12:18:36 Received message from Master: op=PointingHead serial=123567 12:18:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:18:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:18:36 Point started: ret=0 12:18:36 point_skyscan result=0 12:18:37 Check angles 12:18:37 SkyScan query 12:18:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:18:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:18:37 Message to Master queued w/err=0: serial=123567 error=0 12:18:42 Received message from Master: op=Filter serial=123568 12:18:42 Color wheel filter change from 0 to 0 12:18:42 FLIGetFilterPos err=0 currentPosition=0 12:18:42 FLIGetStepsRemaining err=0 RemainingSteps=0 12:18:42 Filter is already there-color wheel unchanged 12:18:43 Received message from Master: op=Shutter serial=123569 12:18:43 Shutter LASER close 12:18:43 Received message from Camera: op=State serial=123571 12:18:43 GetSingleValue result=40 Value=cccccccc 12:18:43 SkyScan query 12:18:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:18:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:43 Parameters OK 12:18:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:43 Set A/D data flow result=40 12:18:43 Set A/D channel type result=40 12:18:43 Set A/D encoding result=40 12:18:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:43 Set channel filter=0.000000e+000 result=40 12:18:43 Config A/D Result=40 12:18:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:43 Get A/D filter: -9.255963e+061 result=40 12:18:43 Get A/D value=-858993460 result=40 12:18:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:43 Parameters OK 12:18:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:43 Set A/D data flow result=40 12:18:43 Set A/D channel type result=40 12:18:43 Set A/D encoding result=40 12:18:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:43 Set channel filter=0.000000e+000 result=40 12:18:43 Config A/D Result=40 12:18:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:43 Get A/D filter: -9.255963e+061 result=40 12:18:43 Get A/D value=-858993460 result=40 12:18:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:43 Aux= 12:18:43 Message to Camera, serial 123571 queued 12:19:20 Received message from Master: op=PointingHead serial=123584 12:19:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:19:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:19:20 Point started: ret=0 12:19:20 point_skyscan result=0 12:19:21 Check angles 12:19:21 SkyScan query 12:19:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 12:19:22 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 12:19:22 Check angles 12:19:22 SkyScan query 12:19:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 12:19:22 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 12:19:23 Check angles 12:19:23 SkyScan query 12:19:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.95<-16330 Statuses=0008 0009 12:19:23 Msec=1500 True Az=112.995 Ze=-64.95 Az status=0008 Ze status=0009 12:19:23 Check angles 12:19:23 SkyScan query 12:19:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.89<-17726 Statuses=0008 0009 12:19:24 Msec=2250 True Az=112.995 Ze=-85.89 Az status=0008 Ze status=0009 12:19:24 Check angles 12:19:24 SkyScan query 12:19:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.845<-19123 Statuses=0008 0009 12:19:25 Msec=3000 True Az=112.995 Ze=-106.845 Az status=0008 Ze status=0009 12:19:25 Check angles 12:19:25 SkyScan query 12:19:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.785<-20519 Statuses=0008 0009 12:19:25 Msec=3750 True Az=112.995 Ze=-127.785 Az status=0008 Ze status=0009 12:19:26 Check angles 12:19:26 SkyScan query 12:19:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.71<-21914 Statuses=0008 0009 12:19:26 Msec=4500 True Az=112.995 Ze=-148.71 Az status=0008 Ze status=0009 12:19:26 Check angles 12:19:26 SkyScan query 12:19:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.665<-23311 Statuses=0008 0009 12:19:27 Msec=5250 True Az=112.995 Ze=-169.665 Az status=0008 Ze status=0009 12:19:27 Check angles 12:19:27 SkyScan query 12:19:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:19:28 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:19:28 Message to Master queued w/err=0: serial=123584 error=0 12:19:33 Received message from Master: op=Filter serial=123585 12:19:33 Color wheel filter change from 0 to 0 12:19:33 FLIGetFilterPos err=0 currentPosition=0 12:19:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:19:33 Filter is already there-color wheel unchanged 12:19:33 Received message from Master: op=Shutter serial=123586 12:19:33 Shutter LASER open 12:19:33 Received message from Camera: op=State serial=123588 12:19:33 GetSingleValue result=40 Value=cccccccc 12:19:33 SkyScan query 12:19:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:19:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:34 Parameters OK 12:19:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:34 Set A/D data flow result=40 12:19:34 Set A/D channel type result=40 12:19:34 Set A/D encoding result=40 12:19:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:34 Set channel filter=0.000000e+000 result=40 12:19:34 Config A/D Result=40 12:19:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:34 Get A/D filter: -9.255963e+061 result=40 12:19:34 Get A/D value=-858993460 result=40 12:19:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:34 Parameters OK 12:19:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:34 Set A/D data flow result=40 12:19:34 Set A/D channel type result=40 12:19:34 Set A/D encoding result=40 12:19:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:34 Set channel filter=0.000000e+000 result=40 12:19:34 Config A/D Result=40 12:19:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:34 Get A/D filter: -9.255963e+061 result=40 12:19:34 Get A/D value=-858993460 result=40 12:19:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:19:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:19:34 Aux= 12:19:34 Message to Camera, serial 123588 queued 12:19:41 Received message from Master: op=Shutter serial=123597 12:19:41 Shutter LASER close 12:19:42 Received message from Master: op=PointingHead serial=123601 12:19:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:19:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:19:42 Point started: ret=0 12:19:42 point_skyscan result=0 12:19:43 Check angles 12:19:43 SkyScan query 12:19:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.025<-21535 Statuses=0008 0009 12:19:43 Msec=0 True Az=112.995 Ze=-143.025 Az status=0008 Ze status=0009 12:19:44 Check angles 12:19:44 SkyScan query 12:19:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.575<-20105 Statuses=0008 0009 12:19:44 Msec=750 True Az=112.995 Ze=-121.575 Az status=0008 Ze status=0009 12:19:44 Check angles 12:19:44 SkyScan query 12:19:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.14<-18676 Statuses=0008 0009 12:19:45 Msec=1500 True Az=112.995 Ze=-100.14 Az status=0008 Ze status=0009 12:19:45 Check angles 12:19:45 SkyScan query 12:19:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.2<-17280 Statuses=0008 0009 12:19:46 Msec=2250 True Az=112.995 Ze=-79.2 Az status=0008 Ze status=0009 12:19:46 Check angles 12:19:46 SkyScan query 12:19:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.245<-15883 Statuses=0008 0009 12:19:46 Msec=3000 True Az=112.995 Ze=-58.245 Az status=0008 Ze status=0009 12:19:47 Check angles 12:19:47 SkyScan query 12:19:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.35<-14490 Statuses=0008 0009 12:19:47 Msec=3750 True Az=112.995 Ze=-37.35 Az status=0008 Ze status=0009 12:19:47 Check angles 12:19:47 SkyScan query 12:19:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.38<-13092 Statuses=0008 0009 12:19:48 Msec=4500 True Az=112.995 Ze=-16.38 Az status=0008 Ze status=0009 12:19:48 Check angles 12:19:48 SkyScan query 12:19:49 SkyScan query done: ret=0 az=112.995<-7533 ze=4.44<-11704 Statuses=0008 0009 12:19:49 Msec=5250 True Az=112.995 Ze=4.44 Az status=0008 Ze status=0009 12:19:49 Check angles 12:19:49 SkyScan query 12:19:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:19:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:19:49 Message to Master queued w/err=0: serial=123601 error=0 12:19:54 Received message from Master: op=Filter serial=123602 12:19:54 Color wheel filter change from 0 to 0 12:19:54 FLIGetFilterPos err=0 currentPosition=0 12:19:54 FLIGetStepsRemaining err=0 RemainingSteps=0 12:19:54 Filter is already there-color wheel unchanged 12:19:55 Received message from Master: op=Shutter serial=123603 12:19:55 Shutter LASER close 12:19:55 Received message from Camera: op=State serial=123605 12:19:55 GetSingleValue result=40 Value=cccccccc 12:19:55 SkyScan query 12:19:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:19:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:55 Parameters OK 12:19:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:55 Set A/D data flow result=40 12:19:55 Set A/D channel type result=40 12:19:55 Set A/D encoding result=40 12:19:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:55 Set channel filter=0.000000e+000 result=40 12:19:55 Config A/D Result=40 12:19:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:55 Get A/D filter: -9.255963e+061 result=40 12:19:55 Get A/D value=-858993460 result=40 12:19:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:55 Parameters OK 12:19:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:55 Set A/D data flow result=40 12:19:55 Set A/D channel type result=40 12:19:55 Set A/D encoding result=40 12:19:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:55 Set channel filter=0.000000e+000 result=40 12:19:55 Config A/D Result=40 12:19:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:55 Get A/D filter: -9.255963e+061 result=40 12:19:55 Get A/D value=-858993460 result=40 12:19:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:19:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:19:55 Aux= 12:19:55 Message to Camera, serial 123605 queued 12:20:32 Received message from Master: op=PointingHead serial=123618 12:20:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:20:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:20:33 Point started: ret=0 12:20:33 point_skyscan result=0 12:20:33 Check angles 12:20:33 SkyScan query 12:20:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:20:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:20:34 Message to Master queued w/err=0: serial=123618 error=0 12:20:39 Received message from Master: op=Filter serial=123619 12:20:39 Color wheel filter change from 0 to 0 12:20:39 FLIGetFilterPos err=0 currentPosition=0 12:20:39 FLIGetStepsRemaining err=0 RemainingSteps=0 12:20:39 Filter is already there-color wheel unchanged 12:20:39 Received message from Master: op=Shutter serial=123620 12:20:39 Shutter LASER close 12:20:39 Received message from Camera: op=State serial=123622 12:20:39 GetSingleValue result=40 Value=cccccccc 12:20:39 SkyScan query 12:20:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:20:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:40 Parameters OK 12:20:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:40 Set A/D data flow result=40 12:20:40 Set A/D channel type result=40 12:20:40 Set A/D encoding result=40 12:20:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:40 Set channel filter=0.000000e+000 result=40 12:20:40 Config A/D Result=40 12:20:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:40 Get A/D filter: -9.255963e+061 result=40 12:20:40 Get A/D value=-858993460 result=40 12:20:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:40 Parameters OK 12:20:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:40 Set A/D data flow result=40 12:20:40 Set A/D channel type result=40 12:20:40 Set A/D encoding result=40 12:20:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:40 Set channel filter=0.000000e+000 result=40 12:20:40 Config A/D Result=40 12:20:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:40 Get A/D filter: -9.255963e+061 result=40 12:20:40 Get A/D value=-858993460 result=40 12:20:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:20:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:20:40 Aux= 12:20:40 Message to Camera, serial 123622 queued 12:21:17 Received message from Master: op=PointingHead serial=123635 12:21:17 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:21:17 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:21:17 Point started: ret=0 12:21:17 point_skyscan result=0 12:21:18 Check angles 12:21:18 SkyScan query 12:21:18 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.51<-12434 Statuses=0009 0008 12:21:18 Msec=0 True Az=135.915 Ze=-6.51 Az status=0009 Ze status=0008 12:21:18 Check angles 12:21:18 SkyScan query 12:21:19 SkyScan query done: ret=0 az=153.465<-10231 ze=-6.495<-12433 Statuses=0009 0008 12:21:19 Msec=750 True Az=153.465 Ze=-6.495 Az status=0009 Ze status=0008 12:21:19 Check angles 12:21:19 SkyScan query 12:21:20 SkyScan query done: ret=0 az=170.955<-11397 ze=-6.495<-12433 Statuses=0009 0008 12:21:20 Msec=1500 True Az=170.955 Ze=-6.495 Az status=0009 Ze status=0008 12:21:20 Check angles 12:21:20 SkyScan query 12:21:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:21:20 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:21:20 Message to Master queued w/err=0: serial=123635 error=0 12:21:25 Received message from Master: op=Filter serial=123636 12:21:25 Color wheel filter change from 0 to 0 12:21:25 FLIGetFilterPos err=0 currentPosition=0 12:21:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:21:25 Filter is already there-color wheel unchanged 12:21:26 Received message from Master: op=Shutter serial=123637 12:21:26 Shutter LASER close 12:21:26 Received message from Camera: op=State serial=123639 12:21:26 GetSingleValue result=40 Value=cccccccc 12:21:26 SkyScan query 12:21:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:21:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:26 Parameters OK 12:21:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:26 Set A/D data flow result=40 12:21:26 Set A/D channel type result=40 12:21:26 Set A/D encoding result=40 12:21:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:26 Set channel filter=0.000000e+000 result=40 12:21:26 Config A/D Result=40 12:21:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:26 Get A/D filter: -9.255963e+061 result=40 12:21:26 Get A/D value=-858993460 result=40 12:21:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:26 Parameters OK 12:21:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:26 Set A/D data flow result=40 12:21:26 Set A/D channel type result=40 12:21:26 Set A/D encoding result=40 12:21:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:26 Set channel filter=0.000000e+000 result=40 12:21:26 Config A/D Result=40 12:21:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:26 Get A/D filter: -9.255963e+061 result=40 12:21:26 Get A/D value=-858993460 result=40 12:21:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:21:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:21:26 Aux= 12:21:26 Message to Camera, serial 123639 queued 12:22:03 Received message from Master: op=PointingHead serial=123652 12:22:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:22:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:22:03 Point started: ret=0 12:22:03 point_skyscan result=0 12:22:04 Check angles 12:22:04 SkyScan query 12:22:05 SkyScan query done: ret=0 az=152.55<-10170 ze=6.51<-11566 Statuses=0009 0008 12:22:05 Msec=0 True Az=152.55 Ze=6.51 Az status=0009 Ze status=0008 12:22:05 Check angles 12:22:05 SkyScan query 12:22:06 SkyScan query done: ret=0 az=134.595<-8973 ze=6.495<-11567 Statuses=0009 0008 12:22:06 Msec=750 True Az=134.595 Ze=6.495 Az status=0009 Ze status=0008 12:22:06 Check angles 12:22:06 SkyScan query 12:22:06 SkyScan query done: ret=0 az=117.21<-7814 ze=6.495<-11567 Statuses=0009 0008 12:22:06 Msec=1500 True Az=117.21 Ze=6.495 Az status=0009 Ze status=0008 12:22:06 Check angles 12:22:06 SkyScan query 12:22:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:22:07 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:22:07 Message to Master queued w/err=0: serial=123652 error=0 12:22:12 Received message from Master: op=Filter serial=123653 12:22:12 Color wheel filter change from 0 to 0 12:22:12 FLIGetFilterPos err=0 currentPosition=0 12:22:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:22:12 Filter is already there-color wheel unchanged 12:22:12 Received message from Master: op=Shutter serial=123654 12:22:12 Shutter LASER close 12:22:12 Received message from Camera: op=State serial=123656 12:22:12 GetSingleValue result=40 Value=cccccccc 12:22:12 SkyScan query 12:22:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:22:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:13 Parameters OK 12:22:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:13 Set A/D data flow result=40 12:22:13 Set A/D channel type result=40 12:22:13 Set A/D encoding result=40 12:22:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:13 Set channel filter=0.000000e+000 result=40 12:22:13 Config A/D Result=40 12:22:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:13 Get A/D filter: -9.255963e+061 result=40 12:22:13 Get A/D value=-858993460 result=40 12:22:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:13 Parameters OK 12:22:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:13 Set A/D data flow result=40 12:22:13 Set A/D channel type result=40 12:22:13 Set A/D encoding result=40 12:22:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:13 Set channel filter=0.000000e+000 result=40 12:22:13 Config A/D Result=40 12:22:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:13 Get A/D filter: -9.255963e+061 result=40 12:22:13 Get A/D value=-858993460 result=40 12:22:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:22:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:22:13 Aux= 12:22:13 Message to Camera, serial 123656 queued 12:22:50 Received message from Master: op=PointingHead serial=123669 12:22:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:22:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:22:50 Point started: ret=0 12:22:50 point_skyscan result=0 12:22:51 Check angles 12:22:51 SkyScan query 12:22:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 12:22:51 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 12:22:52 Check angles 12:22:52 SkyScan query 12:22:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 12:22:52 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 12:22:52 Check angles 12:22:52 SkyScan query 12:22:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.355<-16357 Statuses=0008 0009 12:22:53 Msec=1500 True Az=112.995 Ze=-65.355 Az status=0008 Ze status=0009 12:22:53 Check angles 12:22:53 SkyScan query 12:22:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.31<-17754 Statuses=0008 0009 12:22:54 Msec=2250 True Az=112.995 Ze=-86.31 Az status=0008 Ze status=0009 12:22:54 Check angles 12:22:54 SkyScan query 12:22:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.265<-19151 Statuses=0008 0009 12:22:54 Msec=3000 True Az=112.995 Ze=-107.265 Az status=0008 Ze status=0009 12:22:55 Check angles 12:22:55 SkyScan query 12:22:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.22<-20548 Statuses=0008 0009 12:22:55 Msec=3750 True Az=112.995 Ze=-128.22 Az status=0008 Ze status=0009 12:22:55 Check angles 12:22:55 SkyScan query 12:22:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.685<-21979 Statuses=0008 0009 12:22:56 Msec=4500 True Az=112.995 Ze=-149.685 Az status=0008 Ze status=0009 12:22:56 Check angles 12:22:56 SkyScan query 12:22:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.94<-23396 Statuses=0008 0009 12:22:57 Msec=5250 True Az=112.995 Ze=-170.94 Az status=0008 Ze status=0009 12:22:57 Check angles 12:22:57 SkyScan query 12:22:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:22:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:22:57 Message to Master queued w/err=0: serial=123669 error=0 12:23:02 Received message from Master: op=Filter serial=123670 12:23:02 Color wheel filter change from 0 to 0 12:23:02 FLIGetFilterPos err=0 currentPosition=0 12:23:02 FLIGetStepsRemaining err=0 RemainingSteps=0 12:23:02 Filter is already there-color wheel unchanged 12:23:03 Received message from Master: op=Shutter serial=123671 12:23:03 Shutter LASER open 12:23:03 Received message from Camera: op=State serial=123673 12:23:03 GetSingleValue result=40 Value=cccccccc 12:23:03 SkyScan query 12:23:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:23:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:03 Parameters OK 12:23:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:03 Set A/D data flow result=40 12:23:03 Set A/D channel type result=40 12:23:03 Set A/D encoding result=40 12:23:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:03 Set channel filter=0.000000e+000 result=40 12:23:03 Config A/D Result=40 12:23:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:03 Get A/D filter: -9.255963e+061 result=40 12:23:03 Get A/D value=-858993460 result=40 12:23:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:03 Parameters OK 12:23:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:03 Set A/D data flow result=40 12:23:03 Set A/D channel type result=40 12:23:03 Set A/D encoding result=40 12:23:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:03 Set channel filter=0.000000e+000 result=40 12:23:03 Config A/D Result=40 12:23:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:03 Get A/D filter: -9.255963e+061 result=40 12:23:03 Get A/D value=-858993460 result=40 12:23:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:23:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:23:03 Aux= 12:23:03 Message to Camera, serial 123673 queued 12:23:12 Received message from Master: op=Shutter serial=123683 12:23:12 Shutter LASER close 12:23:12 Received message from Master: op=PointingHead serial=123687 12:23:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:23:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:23:13 Point started: ret=0 12:23:13 point_skyscan result=0 12:23:13 Check angles 12:23:13 SkyScan query 12:23:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.475<-21565 Statuses=0008 0009 12:23:14 Msec=0 True Az=112.995 Ze=-143.475 Az status=0008 Ze status=0009 12:23:14 Check angles 12:23:14 SkyScan query 12:23:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.55<-20170 Statuses=0008 0009 12:23:15 Msec=750 True Az=112.995 Ze=-122.55 Az status=0008 Ze status=0009 12:23:15 Check angles 12:23:15 SkyScan query 12:23:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.58<-18772 Statuses=0008 0009 12:23:15 Msec=1500 True Az=112.995 Ze=-101.58 Az status=0008 Ze status=0009 12:23:16 Check angles 12:23:16 SkyScan query 12:23:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.625<-17375 Statuses=0008 0009 12:23:16 Msec=2250 True Az=112.995 Ze=-80.625 Az status=0008 Ze status=0009 12:23:16 Check angles 12:23:16 SkyScan query 12:23:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.235<-15949 Statuses=0008 0009 12:23:17 Msec=3000 True Az=112.995 Ze=-59.235 Az status=0008 Ze status=0009 12:23:17 Check angles 12:23:17 SkyScan query 12:23:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 12:23:18 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 12:23:18 Check angles 12:23:18 SkyScan query 12:23:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 12:23:18 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 12:23:19 Check angles 12:23:19 SkyScan query 12:23:19 SkyScan query done: ret=0 az=113.01<-7534 ze=4.125<-11725 Statuses=0008 0009 12:23:19 Msec=5250 True Az=113.01 Ze=4.125 Az status=0008 Ze status=0009 12:23:19 Check angles 12:23:19 SkyScan query 12:23:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:23:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:23:20 Message to Master queued w/err=0: serial=123687 error=0 12:23:25 Received message from Master: op=Filter serial=123688 12:23:25 Color wheel filter change from 0 to 0 12:23:25 FLIGetFilterPos err=0 currentPosition=0 12:23:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:23:25 Filter is already there-color wheel unchanged 12:23:25 Received message from Master: op=Shutter serial=123689 12:23:25 Shutter LASER close 12:23:25 Received message from Camera: op=State serial=123691 12:23:25 GetSingleValue result=40 Value=cccccccc 12:23:25 SkyScan query 12:23:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:23:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:26 Parameters OK 12:23:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:26 Set A/D data flow result=40 12:23:26 Set A/D channel type result=40 12:23:26 Set A/D encoding result=40 12:23:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:26 Set channel filter=0.000000e+000 result=40 12:23:26 Config A/D Result=40 12:23:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:26 Get A/D filter: -9.255963e+061 result=40 12:23:26 Get A/D value=-858993460 result=40 12:23:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:26 Parameters OK 12:23:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:26 Set A/D data flow result=40 12:23:26 Set A/D channel type result=40 12:23:26 Set A/D encoding result=40 12:23:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:26 Set channel filter=0.000000e+000 result=40 12:23:26 Config A/D Result=40 12:23:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:26 Get A/D filter: -9.255963e+061 result=40 12:23:26 Get A/D value=-858993460 result=40 12:23:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:23:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:23:26 Aux= 12:23:26 Message to Camera, serial 123691 queued [UTC 2019-3-5 12:23:50] 12:24:03 Received message from Master: op=PointingHead serial=123704 12:24:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:24:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:24:03 Point started: ret=0 12:24:03 point_skyscan result=0 12:24:04 Check angles 12:24:04 SkyScan query 12:24:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:24:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:24:04 Message to Master queued w/err=0: serial=123704 error=0 12:24:09 Received message from Master: op=Filter serial=123705 12:24:09 Color wheel filter change from 0 to 0 12:24:09 FLIGetFilterPos err=0 currentPosition=0 12:24:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:24:09 Filter is already there-color wheel unchanged 12:24:10 Received message from Master: op=Shutter serial=123706 12:24:10 Shutter LASER close 12:24:10 Received message from Camera: op=State serial=123708 12:24:10 GetSingleValue result=40 Value=cccccccc 12:24:10 SkyScan query 12:24:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:24:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:10 Parameters OK 12:24:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:10 Set A/D data flow result=40 12:24:10 Set A/D channel type result=40 12:24:10 Set A/D encoding result=40 12:24:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:10 Set channel filter=0.000000e+000 result=40 12:24:10 Config A/D Result=40 12:24:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:10 Get A/D filter: -9.255963e+061 result=40 12:24:10 Get A/D value=-858993460 result=40 12:24:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:10 Parameters OK 12:24:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:10 Set A/D data flow result=40 12:24:10 Set A/D channel type result=40 12:24:10 Set A/D encoding result=40 12:24:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:10 Set channel filter=0.000000e+000 result=40 12:24:10 Config A/D Result=40 12:24:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:10 Get A/D filter: -9.255963e+061 result=40 12:24:10 Get A/D value=-858993460 result=40 12:24:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:10 Aux= 12:24:10 Message to Camera, serial 123708 queued 12:24:47 Received message from Master: op=PointingHead serial=123721 12:24:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:24:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:24:47 Point started: ret=0 12:24:47 point_skyscan result=0 12:24:48 Check angles 12:24:48 SkyScan query 12:24:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:24:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:24:49 Message to Master queued w/err=0: serial=123721 error=0 12:24:54 Received message from Master: op=Filter serial=123722 12:24:54 Color wheel filter change from 0 to 0 12:24:54 FLIGetFilterPos err=0 currentPosition=0 12:24:54 FLIGetStepsRemaining err=0 RemainingSteps=0 12:24:54 Filter is already there-color wheel unchanged 12:24:54 Received message from Master: op=Shutter serial=123723 12:24:54 Shutter LASER close 12:24:54 Received message from Camera: op=State serial=123725 12:24:54 GetSingleValue result=40 Value=cccccccc 12:24:54 SkyScan query 12:24:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:24:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:54 Parameters OK 12:24:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:54 Set A/D data flow result=40 12:24:54 Set A/D channel type result=40 12:24:54 Set A/D encoding result=40 12:24:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:54 Set channel filter=0.000000e+000 result=40 12:24:54 Config A/D Result=40 12:24:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:54 Get A/D filter: -9.255963e+061 result=40 12:24:54 Get A/D value=-858993460 result=40 12:24:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:54 Parameters OK 12:24:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:54 Set A/D data flow result=40 12:24:54 Set A/D channel type result=40 12:24:54 Set A/D encoding result=40 12:24:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:54 Set channel filter=0.000000e+000 result=40 12:24:54 Config A/D Result=40 12:24:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:54 Get A/D filter: -9.255963e+061 result=40 12:24:54 Get A/D value=-858993460 result=40 12:24:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:54 Aux= 12:24:54 Message to Camera, serial 123725 queued 12:25:31 Received message from Master: op=PointingHead serial=123738 12:25:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:25:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:25:32 Point started: ret=0 12:25:32 point_skyscan result=0 12:25:32 Check angles 12:25:32 SkyScan query 12:25:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:25:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:25:33 Message to Master queued w/err=0: serial=123738 error=0 12:25:38 Received message from Master: op=Filter serial=123739 12:25:38 Color wheel filter change from 0 to 0 12:25:38 FLIGetFilterPos err=0 currentPosition=0 12:25:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:25:38 Filter is already there-color wheel unchanged 12:25:38 Received message from Master: op=Shutter serial=123740 12:25:38 Shutter LASER close 12:25:38 Received message from Camera: op=State serial=123742 12:25:38 GetSingleValue result=40 Value=cccccccc 12:25:38 SkyScan query 12:25:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:25:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:39 Parameters OK 12:25:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:39 Set A/D data flow result=40 12:25:39 Set A/D channel type result=40 12:25:39 Set A/D encoding result=40 12:25:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:39 Set channel filter=0.000000e+000 result=40 12:25:39 Config A/D Result=40 12:25:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:39 Get A/D filter: -9.255963e+061 result=40 12:25:39 Get A/D value=-858993460 result=40 12:25:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:39 Parameters OK 12:25:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:39 Set A/D data flow result=40 12:25:39 Set A/D channel type result=40 12:25:39 Set A/D encoding result=40 12:25:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:39 Set channel filter=0.000000e+000 result=40 12:25:39 Config A/D Result=40 12:25:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:39 Get A/D filter: -9.255963e+061 result=40 12:25:39 Get A/D value=-858993460 result=40 12:25:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:25:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:25:39 Aux= 12:25:39 Message to Camera, serial 123742 queued 12:26:16 Received message from Master: op=PointingHead serial=123755 12:26:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:26:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:26:16 Point started: ret=0 12:26:16 point_skyscan result=0 12:26:17 Check angles 12:26:17 SkyScan query 12:26:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.22<-13548 Statuses=0008 0009 12:26:17 Msec=0 True Az=112.995 Ze=-23.22 Az status=0008 Ze status=0009 12:26:17 Check angles 12:26:17 SkyScan query 12:26:18 SkyScan query done: ret=0 az=112.98<-7532 ze=-44.19<-14946 Statuses=0008 0009 12:26:18 Msec=750 True Az=112.98 Ze=-44.19 Az status=0008 Ze status=0009 12:26:18 Check angles 12:26:18 SkyScan query 12:26:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.115<-16341 Statuses=0008 0009 12:26:19 Msec=1500 True Az=112.995 Ze=-65.115 Az status=0008 Ze status=0009 12:26:19 Check angles 12:26:19 SkyScan query 12:26:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.025<-17735 Statuses=0008 0009 12:26:20 Msec=2250 True Az=112.995 Ze=-86.025 Az status=0008 Ze status=0009 12:26:20 Check angles 12:26:20 SkyScan query 12:26:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.98<-19132 Statuses=0008 0009 12:26:20 Msec=3000 True Az=112.995 Ze=-106.98 Az status=0008 Ze status=0009 12:26:20 Check angles 12:26:20 SkyScan query 12:26:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.95<-20530 Statuses=0008 0009 12:26:21 Msec=3750 True Az=112.995 Ze=-127.95 Az status=0008 Ze status=0009 12:26:21 Check angles 12:26:21 SkyScan query 12:26:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.89<-21926 Statuses=0008 0009 12:26:22 Msec=4500 True Az=112.995 Ze=-148.89 Az status=0008 Ze status=0009 12:26:22 Check angles 12:26:22 SkyScan query 12:26:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.83<-23322 Statuses=0008 0009 12:26:23 Msec=5250 True Az=112.995 Ze=-169.83 Az status=0008 Ze status=0009 12:26:23 Check angles 12:26:23 SkyScan query 12:26:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:26:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:26:23 Message to Master queued w/err=0: serial=123755 error=0 12:26:28 Received message from Master: op=Filter serial=123756 12:26:28 Color wheel filter change from 0 to 0 12:26:28 FLIGetFilterPos err=0 currentPosition=0 12:26:28 FLIGetStepsRemaining err=0 RemainingSteps=0 12:26:28 Filter is already there-color wheel unchanged 12:26:28 Received message from Master: op=Shutter serial=123757 12:26:28 Shutter LASER open 12:26:29 Received message from Camera: op=State serial=123759 12:26:29 GetSingleValue result=40 Value=cccccccc 12:26:29 SkyScan query 12:26:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:26:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:29 Parameters OK 12:26:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:29 Set A/D data flow result=40 12:26:29 Set A/D channel type result=40 12:26:29 Set A/D encoding result=40 12:26:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:29 Set channel filter=0.000000e+000 result=40 12:26:29 Config A/D Result=40 12:26:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:29 Get A/D filter: -9.255963e+061 result=40 12:26:29 Get A/D value=-858993460 result=40 12:26:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:29 Parameters OK 12:26:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:29 Set A/D data flow result=40 12:26:29 Set A/D channel type result=40 12:26:29 Set A/D encoding result=40 12:26:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:29 Set channel filter=0.000000e+000 result=40 12:26:29 Config A/D Result=40 12:26:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:29 Get A/D filter: -9.255963e+061 result=40 12:26:29 Get A/D value=-858993460 result=40 12:26:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:26:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:26:29 Aux= 12:26:29 Message to Camera, serial 123759 queued 12:26:38 Received message from Master: op=Shutter serial=123769 12:26:38 Shutter LASER close 12:26:38 Received message from Master: op=PointingHead serial=123773 12:26:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:26:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:26:39 Point started: ret=0 12:26:39 point_skyscan result=0 12:26:39 Check angles 12:26:39 SkyScan query 12:26:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 12:26:40 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 12:26:40 Check angles 12:26:40 SkyScan query 12:26:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.19<-20146 Statuses=0008 0009 12:26:41 Msec=750 True Az=112.995 Ze=-122.19 Az status=0008 Ze status=0009 12:26:41 Check angles 12:26:41 SkyScan query 12:26:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.265<-18751 Statuses=0008 0009 12:26:41 Msec=1500 True Az=112.995 Ze=-101.265 Az status=0008 Ze status=0009 12:26:42 Check angles 12:26:42 SkyScan query 12:26:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.28<-17352 Statuses=0008 0009 12:26:42 Msec=2250 True Az=112.995 Ze=-80.28 Az status=0008 Ze status=0009 12:26:42 Check angles 12:26:42 SkyScan query 12:26:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.34<-15956 Statuses=0008 0009 12:26:43 Msec=3000 True Az=112.995 Ze=-59.34 Az status=0008 Ze status=0009 12:26:43 Check angles 12:26:43 SkyScan query 12:26:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.845<-14523 Statuses=0008 0009 12:26:44 Msec=3750 True Az=112.995 Ze=-37.845 Az status=0008 Ze status=0009 12:26:44 Check angles 12:26:44 SkyScan query 12:26:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.89<-13126 Statuses=0008 0009 12:26:44 Msec=4500 True Az=112.995 Ze=-16.89 Az status=0008 Ze status=0009 12:26:45 Check angles 12:26:45 SkyScan query 12:26:45 SkyScan query done: ret=0 az=112.995<-7533 ze=4.035<-11731 Statuses=0008 0009 12:26:45 Msec=5250 True Az=112.995 Ze=4.035 Az status=0008 Ze status=0009 12:26:45 Check angles 12:26:45 SkyScan query 12:26:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:26:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:26:46 Message to Master queued w/err=0: serial=123773 error=0 12:26:51 Received message from Master: op=Filter serial=123774 12:26:51 Color wheel filter change from 0 to 0 12:26:51 FLIGetFilterPos err=0 currentPosition=0 12:26:51 FLIGetStepsRemaining err=0 RemainingSteps=0 12:26:51 Filter is already there-color wheel unchanged 12:26:51 Received message from Master: op=Shutter serial=123775 12:26:51 Shutter LASER close 12:26:51 Received message from Camera: op=State serial=123777 12:26:51 GetSingleValue result=40 Value=cccccccc 12:26:51 SkyScan query 12:26:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:26:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:52 Parameters OK 12:26:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:52 Set A/D data flow result=40 12:26:52 Set A/D channel type result=40 12:26:52 Set A/D encoding result=40 12:26:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:52 Set channel filter=0.000000e+000 result=40 12:26:52 Config A/D Result=40 12:26:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:52 Get A/D filter: -9.255963e+061 result=40 12:26:52 Get A/D value=-858993460 result=40 12:26:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:52 Parameters OK 12:26:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:52 Set A/D data flow result=40 12:26:52 Set A/D channel type result=40 12:26:52 Set A/D encoding result=40 12:26:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:52 Set channel filter=0.000000e+000 result=40 12:26:52 Config A/D Result=40 12:26:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:52 Get A/D filter: -9.255963e+061 result=40 12:26:52 Get A/D value=-858993460 result=40 12:26:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:26:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:26:52 Aux= 12:26:52 Message to Camera, serial 123777 queued 12:27:29 Received message from Master: op=PointingHead serial=123790 12:27:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:27:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:27:29 Point started: ret=0 12:27:29 point_skyscan result=0 12:27:30 Check angles 12:27:30 SkyScan query 12:27:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:27:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:27:30 Message to Master queued w/err=0: serial=123790 error=0 12:27:35 Received message from Master: op=Filter serial=123791 12:27:35 Color wheel filter change from 0 to 0 12:27:35 FLIGetFilterPos err=0 currentPosition=0 12:27:35 FLIGetStepsRemaining err=0 RemainingSteps=0 12:27:35 Filter is already there-color wheel unchanged 12:27:35 Received message from Master: op=Shutter serial=123792 12:27:35 Shutter LASER close 12:27:36 Received message from Camera: op=State serial=123794 12:27:36 GetSingleValue result=40 Value=cccccccc 12:27:36 SkyScan query 12:27:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:27:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:36 Parameters OK 12:27:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:36 Set A/D data flow result=40 12:27:36 Set A/D channel type result=40 12:27:36 Set A/D encoding result=40 12:27:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:36 Set channel filter=0.000000e+000 result=40 12:27:36 Config A/D Result=40 12:27:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:36 Get A/D filter: -9.255963e+061 result=40 12:27:36 Get A/D value=-858993460 result=40 12:27:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:36 Parameters OK 12:27:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:36 Set A/D data flow result=40 12:27:36 Set A/D channel type result=40 12:27:36 Set A/D encoding result=40 12:27:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:36 Set channel filter=0.000000e+000 result=40 12:27:36 Config A/D Result=40 12:27:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:36 Get A/D filter: -9.255963e+061 result=40 12:27:36 Get A/D value=-858993460 result=40 12:27:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:27:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:27:36 Aux= 12:27:36 Message to Camera, serial 123794 queued 12:28:13 Received message from Master: op=PointingHead serial=123807 12:28:13 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:28:13 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:28:13 Point started: ret=0 12:28:13 point_skyscan result=0 12:28:14 Check angles 12:28:14 SkyScan query 12:28:15 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 12:28:15 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 12:28:15 Check angles 12:28:15 SkyScan query 12:28:15 SkyScan query done: ret=0 az=153.495<-10233 ze=-6.495<-12433 Statuses=0009 0008 12:28:15 Msec=750 True Az=153.495 Ze=-6.495 Az status=0009 Ze status=0008 12:28:16 Check angles 12:28:16 SkyScan query 12:28:16 SkyScan query done: ret=0 az=170.955<-11397 ze=-6.495<-12433 Statuses=0009 0008 12:28:16 Msec=1500 True Az=170.955 Ze=-6.495 Az status=0009 Ze status=0008 12:28:16 Check angles 12:28:16 SkyScan query 12:28:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:28:17 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:28:17 Message to Master queued w/err=0: serial=123807 error=0 12:28:22 Received message from Master: op=Filter serial=123808 12:28:22 Color wheel filter change from 0 to 0 12:28:22 FLIGetFilterPos err=0 currentPosition=0 12:28:22 FLIGetStepsRemaining err=0 RemainingSteps=0 12:28:22 Filter is already there-color wheel unchanged 12:28:22 Received message from Master: op=Shutter serial=123809 12:28:22 Shutter LASER close 12:28:22 Received message from Camera: op=State serial=123811 12:28:22 GetSingleValue result=40 Value=cccccccc 12:28:22 SkyScan query 12:28:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:28:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:23 Parameters OK 12:28:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:23 Set A/D data flow result=40 12:28:23 Set A/D channel type result=40 12:28:23 Set A/D encoding result=40 12:28:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:23 Set channel filter=0.000000e+000 result=40 12:28:23 Config A/D Result=40 12:28:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:23 Get A/D filter: -9.255963e+061 result=40 12:28:23 Get A/D value=-858993460 result=40 12:28:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:23 Parameters OK 12:28:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:23 Set A/D data flow result=40 12:28:23 Set A/D channel type result=40 12:28:23 Set A/D encoding result=40 12:28:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:23 Set channel filter=0.000000e+000 result=40 12:28:23 Config A/D Result=40 12:28:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:23 Get A/D filter: -9.255963e+061 result=40 12:28:23 Get A/D value=-858993460 result=40 12:28:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:28:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:28:23 Aux= 12:28:23 Message to Camera, serial 123811 queued 12:28:59 Received message from Master: op=PointingHead serial=123824 12:28:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:28:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:29:00 Point started: ret=0 12:29:00 point_skyscan result=0 12:29:01 Check angles 12:29:01 SkyScan query 12:29:01 SkyScan query done: ret=0 az=152.835<-10189 ze=6.51<-11566 Statuses=0009 0008 12:29:01 Msec=0 True Az=152.835 Ze=6.51 Az status=0009 Ze status=0008 12:29:01 Check angles 12:29:01 SkyScan query 12:29:02 SkyScan query done: ret=0 az=135.345<-9023 ze=6.495<-11567 Statuses=0009 0008 12:29:02 Msec=750 True Az=135.345 Ze=6.495 Az status=0009 Ze status=0008 12:29:02 Check angles 12:29:02 SkyScan query 12:29:03 SkyScan query done: ret=0 az=117.495<-7833 ze=6.495<-11567 Statuses=0009 0008 12:29:03 Msec=1500 True Az=117.495 Ze=6.495 Az status=0009 Ze status=0008 12:29:03 Check angles 12:29:03 SkyScan query 12:29:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:29:03 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:29:03 Message to Master queued w/err=0: serial=123824 error=0 12:29:08 Received message from Master: op=Filter serial=123825 12:29:08 Color wheel filter change from 0 to 0 12:29:08 FLIGetFilterPos err=0 currentPosition=0 12:29:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:29:08 Filter is already there-color wheel unchanged 12:29:09 Received message from Master: op=Shutter serial=123826 12:29:09 Shutter LASER close 12:29:09 Received message from Camera: op=State serial=123828 12:29:09 GetSingleValue result=40 Value=cccccccc 12:29:09 SkyScan query 12:29:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:29:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:09 Parameters OK 12:29:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:09 Set A/D data flow result=40 12:29:09 Set A/D channel type result=40 12:29:09 Set A/D encoding result=40 12:29:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:09 Set channel filter=0.000000e+000 result=40 12:29:09 Config A/D Result=40 12:29:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:09 Get A/D filter: -9.255963e+061 result=40 12:29:09 Get A/D value=-858993460 result=40 12:29:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:09 Parameters OK 12:29:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:09 Set A/D data flow result=40 12:29:09 Set A/D channel type result=40 12:29:09 Set A/D encoding result=40 12:29:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:09 Set channel filter=0.000000e+000 result=40 12:29:09 Config A/D Result=40 12:29:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:09 Get A/D filter: -9.255963e+061 result=40 12:29:09 Get A/D value=-858993460 result=40 12:29:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:29:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:29:09 Aux= 12:29:09 Message to Camera, serial 123828 queued 12:29:46 Received message from Master: op=PointingHead serial=123841 12:29:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:29:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:29:46 Point started: ret=0 12:29:46 point_skyscan result=0 12:29:47 Check angles 12:29:47 SkyScan query 12:29:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.82<-13588 Statuses=0008 0009 12:29:48 Msec=0 True Az=112.995 Ze=-23.82 Az status=0008 Ze status=0009 12:29:48 Check angles 12:29:48 SkyScan query 12:29:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.64<-14976 Statuses=0008 0009 12:29:48 Msec=750 True Az=112.995 Ze=-44.64 Az status=0008 Ze status=0009 12:29:49 Check angles 12:29:49 SkyScan query 12:29:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.595<-16373 Statuses=0008 0009 12:29:49 Msec=1500 True Az=112.995 Ze=-65.595 Az status=0008 Ze status=0009 12:29:49 Check angles 12:29:49 SkyScan query 12:29:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.565<-17771 Statuses=0008 0009 12:29:50 Msec=2250 True Az=112.995 Ze=-86.565 Az status=0008 Ze status=0009 12:29:50 Check angles 12:29:50 SkyScan query 12:29:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.535<-19169 Statuses=0008 0009 12:29:51 Msec=3000 True Az=112.995 Ze=-107.535 Az status=0008 Ze status=0009 12:29:51 Check angles 12:29:51 SkyScan query 12:29:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.49<-20566 Statuses=0008 0009 12:29:51 Msec=3750 True Az=112.995 Ze=-128.49 Az status=0008 Ze status=0009 12:29:52 Check angles 12:29:52 SkyScan query 12:29:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.49<-21966 Statuses=0008 0009 12:29:52 Msec=4500 True Az=112.995 Ze=-149.49 Az status=0008 Ze status=0009 12:29:52 Check angles 12:29:52 SkyScan query 12:29:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.43<-23362 Statuses=0008 0009 12:29:53 Msec=5250 True Az=112.995 Ze=-170.43 Az status=0008 Ze status=0009 12:29:53 Check angles 12:29:53 SkyScan query 12:29:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:29:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:29:54 Message to Master queued w/err=0: serial=123841 error=0 12:29:59 Received message from Master: op=Filter serial=123842 12:29:59 Color wheel filter change from 0 to 0 12:29:59 FLIGetFilterPos err=0 currentPosition=0 12:29:59 FLIGetStepsRemaining err=0 RemainingSteps=0 12:29:59 Filter is already there-color wheel unchanged 12:29:59 Received message from Master: op=Shutter serial=123843 12:29:59 Shutter LASER open 12:29:59 Received message from Camera: op=State serial=123845 12:29:59 GetSingleValue result=40 Value=cccccccc 12:29:59 SkyScan query 12:30:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:30:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:00 Parameters OK 12:30:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:00 Set A/D data flow result=40 12:30:00 Set A/D channel type result=40 12:30:00 Set A/D encoding result=40 12:30:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:00 Set channel filter=0.000000e+000 result=40 12:30:00 Config A/D Result=40 12:30:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:00 Get A/D filter: -9.255963e+061 result=40 12:30:00 Get A/D value=-858993460 result=40 12:30:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:00 Parameters OK 12:30:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:00 Set A/D data flow result=40 12:30:00 Set A/D channel type result=40 12:30:00 Set A/D encoding result=40 12:30:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:00 Set channel filter=0.000000e+000 result=40 12:30:00 Config A/D Result=40 12:30:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:00 Get A/D filter: -9.255963e+061 result=40 12:30:00 Get A/D value=-858993460 result=40 12:30:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:00 Aux= 12:30:00 Message to Camera, serial 123845 queued 12:30:08 Received message from Master: op=Shutter serial=123855 12:30:08 Shutter LASER close 12:30:09 Received message from Master: op=PointingHead serial=123859 12:30:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:30:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:30:09 Point started: ret=0 12:30:09 point_skyscan result=0 12:30:10 Check angles 12:30:10 SkyScan query 12:30:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.98<-21532 Statuses=0008 0009 12:30:10 Msec=0 True Az=112.995 Ze=-142.98 Az status=0008 Ze status=0009 12:30:10 Check angles 12:30:10 SkyScan query 12:30:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 12:30:11 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 12:30:11 Check angles 12:30:11 SkyScan query 12:30:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.085<-18739 Statuses=0008 0009 12:30:12 Msec=1500 True Az=112.995 Ze=-101.085 Az status=0008 Ze status=0009 12:30:12 Check angles 12:30:12 SkyScan query 12:30:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.115<-17341 Statuses=0008 0009 12:30:13 Msec=2250 True Az=112.995 Ze=-80.115 Az status=0008 Ze status=0009 12:30:13 Check angles 12:30:13 SkyScan query 12:30:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 12:30:13 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 12:30:13 Check angles 12:30:13 SkyScan query 12:30:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.115<-14541 Statuses=0008 0009 12:30:14 Msec=3750 True Az=112.995 Ze=-38.115 Az status=0008 Ze status=0009 12:30:14 Check angles 12:30:14 SkyScan query 12:30:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.175<-13145 Statuses=0008 0009 12:30:15 Msec=4500 True Az=112.995 Ze=-17.175 Az status=0008 Ze status=0009 12:30:15 Check angles 12:30:15 SkyScan query 12:30:16 SkyScan query done: ret=0 az=112.995<-7533 ze=3.78<-11748 Statuses=0008 0009 12:30:16 Msec=5250 True Az=112.995 Ze=3.78 Az status=0008 Ze status=0009 12:30:16 Check angles 12:30:16 SkyScan query 12:30:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:30:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:30:16 Message to Master queued w/err=0: serial=123859 error=0 12:30:21 Received message from Master: op=Filter serial=123860 12:30:21 Color wheel filter change from 0 to 0 12:30:21 FLIGetFilterPos err=0 currentPosition=0 12:30:21 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:21 Filter is already there-color wheel unchanged 12:30:21 Received message from Master: op=Shutter serial=123861 12:30:21 Shutter LASER close 12:30:22 Received message from Camera: op=State serial=123863 12:30:22 GetSingleValue result=40 Value=cccccccc 12:30:22 SkyScan query 12:30:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:30:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:22 Parameters OK 12:30:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:22 Set A/D data flow result=40 12:30:22 Set A/D channel type result=40 12:30:22 Set A/D encoding result=40 12:30:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:22 Set channel filter=0.000000e+000 result=40 12:30:22 Config A/D Result=40 12:30:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:22 Get A/D filter: -9.255963e+061 result=40 12:30:22 Get A/D value=-858993460 result=40 12:30:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:22 Parameters OK 12:30:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:22 Set A/D data flow result=40 12:30:22 Set A/D channel type result=40 12:30:22 Set A/D encoding result=40 12:30:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:22 Set channel filter=0.000000e+000 result=40 12:30:22 Config A/D Result=40 12:30:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:22 Get A/D filter: -9.255963e+061 result=40 12:30:22 Get A/D value=-858993460 result=40 12:30:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:22 Aux= 12:30:22 Message to Camera, serial 123863 queued 12:30:59 Received message from Master: op=PointingHead serial=123876 12:30:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:30:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:30:59 Point started: ret=0 12:30:59 point_skyscan result=0 12:31:00 Check angles 12:31:00 SkyScan query 12:31:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:31:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:31:01 Message to Master queued w/err=0: serial=123876 error=0 12:31:06 Received message from Master: op=Filter serial=123877 12:31:06 Color wheel filter change from 0 to 0 12:31:06 FLIGetFilterPos err=0 currentPosition=0 12:31:06 FLIGetStepsRemaining err=0 RemainingSteps=0 12:31:06 Filter is already there-color wheel unchanged 12:31:06 Received message from Master: op=Shutter serial=123878 12:31:06 Shutter LASER close 12:31:06 Received message from Camera: op=State serial=123880 12:31:06 GetSingleValue result=40 Value=cccccccc 12:31:06 SkyScan query 12:31:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:31:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:06 Parameters OK 12:31:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:06 Set A/D data flow result=40 12:31:06 Set A/D channel type result=40 12:31:06 Set A/D encoding result=40 12:31:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:06 Set channel filter=0.000000e+000 result=40 12:31:06 Config A/D Result=40 12:31:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:06 Get A/D filter: -9.255963e+061 result=40 12:31:06 Get A/D value=-858993460 result=40 12:31:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:06 Parameters OK 12:31:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:06 Set A/D data flow result=40 12:31:06 Set A/D channel type result=40 12:31:06 Set A/D encoding result=40 12:31:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:06 Set channel filter=0.000000e+000 result=40 12:31:06 Config A/D Result=40 12:31:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:06 Get A/D filter: -9.255963e+061 result=40 12:31:06 Get A/D value=-858993460 result=40 12:31:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:31:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:31:06 Aux= 12:31:06 Message to Camera, serial 123880 queued 12:31:43 Received message from Master: op=PointingHead serial=123893 12:31:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:31:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:31:44 Point started: ret=0 12:31:44 point_skyscan result=0 12:31:44 Check angles 12:31:44 SkyScan query 12:31:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:31:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:31:45 Message to Master queued w/err=0: serial=123893 error=0 12:31:50 Received message from Master: op=Filter serial=123894 12:31:50 Color wheel filter change from 0 to 0 12:31:50 FLIGetFilterPos err=0 currentPosition=0 12:31:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:31:50 Filter is already there-color wheel unchanged 12:31:50 Received message from Master: op=Shutter serial=123895 12:31:50 Shutter LASER close 12:31:50 Received message from Camera: op=State serial=123897 12:31:50 GetSingleValue result=40 Value=cccccccc 12:31:50 SkyScan query 12:31:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:31:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:51 Parameters OK 12:31:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:51 Set A/D data flow result=40 12:31:51 Set A/D channel type result=40 12:31:51 Set A/D encoding result=40 12:31:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:51 Set channel filter=0.000000e+000 result=40 12:31:51 Config A/D Result=40 12:31:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:51 Get A/D filter: -9.255963e+061 result=40 12:31:51 Get A/D value=-858993460 result=40 12:31:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:51 Parameters OK 12:31:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:51 Set A/D data flow result=40 12:31:51 Set A/D channel type result=40 12:31:51 Set A/D encoding result=40 12:31:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:51 Set channel filter=0.000000e+000 result=40 12:31:51 Config A/D Result=40 12:31:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:51 Get A/D filter: -9.255963e+061 result=40 12:31:51 Get A/D value=-858993460 result=40 12:31:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:31:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:31:51 Aux= 12:31:51 Message to Camera, serial 123897 queued 12:32:28 Received message from Master: op=PointingHead serial=123910 12:32:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:32:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:32:28 Point started: ret=0 12:32:28 point_skyscan result=0 12:32:29 Check angles 12:32:29 SkyScan query 12:32:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:32:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:32:29 Message to Master queued w/err=0: serial=123910 error=0 12:32:34 Received message from Master: op=Filter serial=123911 12:32:34 Color wheel filter change from 0 to 0 12:32:34 FLIGetFilterPos err=0 currentPosition=0 12:32:34 FLIGetStepsRemaining err=0 RemainingSteps=0 12:32:34 Filter is already there-color wheel unchanged 12:32:34 Received message from Master: op=Shutter serial=123912 12:32:34 Shutter LASER close 12:32:35 Received message from Camera: op=State serial=123914 12:32:35 GetSingleValue result=40 Value=cccccccc 12:32:35 SkyScan query 12:32:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:32:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:35 Parameters OK 12:32:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:35 Set A/D data flow result=40 12:32:35 Set A/D channel type result=40 12:32:35 Set A/D encoding result=40 12:32:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:35 Set channel filter=0.000000e+000 result=40 12:32:35 Config A/D Result=40 12:32:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:35 Get A/D filter: -9.255963e+061 result=40 12:32:35 Get A/D value=-858993460 result=40 12:32:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:35 Parameters OK 12:32:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:35 Set A/D data flow result=40 12:32:35 Set A/D channel type result=40 12:32:35 Set A/D encoding result=40 12:32:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:35 Set channel filter=0.000000e+000 result=40 12:32:35 Config A/D Result=40 12:32:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:35 Get A/D filter: -9.255963e+061 result=40 12:32:35 Get A/D value=-858993460 result=40 12:32:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:32:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:32:35 Aux= 12:32:35 Message to Camera, serial 123914 queued 12:33:12 Received message from Master: op=PointingHead serial=123927 12:33:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:33:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:33:12 Point started: ret=0 12:33:12 point_skyscan result=0 12:33:13 Check angles 12:33:13 SkyScan query 12:33:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 12:33:14 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 12:33:14 Check angles 12:33:14 SkyScan query 12:33:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 12:33:14 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 12:33:15 Check angles 12:33:15 SkyScan query 12:33:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.355<-16357 Statuses=0008 0009 12:33:15 Msec=1500 True Az=112.995 Ze=-65.355 Az status=0008 Ze status=0009 12:33:15 Check angles 12:33:15 SkyScan query 12:33:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 12:33:16 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 12:33:16 Check angles 12:33:16 SkyScan query 12:33:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.745<-19183 Statuses=0008 0009 12:33:17 Msec=3000 True Az=112.995 Ze=-107.745 Az status=0008 Ze status=0009 12:33:17 Check angles 12:33:17 SkyScan query 12:33:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.15<-20610 Statuses=0008 0009 12:33:17 Msec=3750 True Az=112.995 Ze=-129.15 Az status=0008 Ze status=0009 12:33:18 Check angles 12:33:18 SkyScan query 12:33:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.105<-22007 Statuses=0008 0009 12:33:18 Msec=4500 True Az=112.995 Ze=-150.105 Az status=0008 Ze status=0009 12:33:18 Check angles 12:33:18 SkyScan query 12:33:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.94<-23396 Statuses=0008 0009 12:33:19 Msec=5250 True Az=112.995 Ze=-170.94 Az status=0008 Ze status=0009 12:33:19 Check angles 12:33:19 SkyScan query 12:33:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:33:20 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:33:20 Message to Master queued w/err=0: serial=123927 error=0 12:33:25 Received message from Master: op=Filter serial=123928 12:33:25 Color wheel filter change from 0 to 0 12:33:25 FLIGetFilterPos err=0 currentPosition=0 12:33:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:33:25 Filter is already there-color wheel unchanged 12:33:25 Received message from Master: op=Shutter serial=123929 12:33:25 Shutter LASER open 12:33:25 Received message from Camera: op=State serial=123931 12:33:25 GetSingleValue result=40 Value=cccccccc 12:33:25 SkyScan query 12:33:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:33:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:26 Parameters OK 12:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:26 Set A/D data flow result=40 12:33:26 Set A/D channel type result=40 12:33:26 Set A/D encoding result=40 12:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:26 Set channel filter=0.000000e+000 result=40 12:33:26 Config A/D Result=40 12:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:26 Get A/D filter: -9.255963e+061 result=40 12:33:26 Get A/D value=-858993460 result=40 12:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:26 Parameters OK 12:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:26 Set A/D data flow result=40 12:33:26 Set A/D channel type result=40 12:33:26 Set A/D encoding result=40 12:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:26 Set channel filter=0.000000e+000 result=40 12:33:26 Config A/D Result=40 12:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:26 Get A/D filter: -9.255963e+061 result=40 12:33:26 Get A/D value=-858993460 result=40 12:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:33:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:33:26 Aux= 12:33:26 Message to Camera, serial 123931 queued 12:33:34 Received message from Master: op=Shutter serial=123941 12:33:34 Shutter LASER close 12:33:35 Received message from Master: op=PointingHead serial=123945 12:33:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:33:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:33:35 Point started: ret=0 12:33:35 point_skyscan result=0 12:33:36 Check angles 12:33:36 SkyScan query 12:33:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 12:33:36 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 12:33:36 Check angles 12:33:36 SkyScan query 12:33:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 12:33:37 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 12:33:37 Check angles 12:33:37 SkyScan query 12:33:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 12:33:38 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 12:33:38 Received message from Master: op=Identify serial=123946 12:33:38 Check angles 12:33:38 SkyScan query 12:33:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.695<-17313 Statuses=0008 0009 12:33:39 Msec=2250 True Az=112.995 Ze=-79.695 Az status=0008 Ze status=0009 12:33:39 Check angles 12:33:39 SkyScan query 12:33:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.275<-15885 Statuses=0008 0009 12:33:39 Msec=3000 True Az=112.995 Ze=-58.275 Az status=0008 Ze status=0009 12:33:39 Check angles 12:33:39 SkyScan query 12:33:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.395<-14493 Statuses=0008 0009 12:33:40 Msec=3750 True Az=112.995 Ze=-37.395 Az status=0008 Ze status=0009 12:33:40 Check angles 12:33:40 SkyScan query 12:33:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.425<-13095 Statuses=0008 0009 12:33:41 Msec=4500 True Az=112.995 Ze=-16.425 Az status=0008 Ze status=0009 12:33:41 Check angles 12:33:41 SkyScan query 12:33:42 SkyScan query done: ret=0 az=112.995<-7533 ze=4.41<-11706 Statuses=0008 0009 12:33:42 Msec=5250 True Az=112.995 Ze=4.41 Az status=0008 Ze status=0009 12:33:42 Check angles 12:33:42 SkyScan query 12:33:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:33:42 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:33:42 Message to Master queued w/err=0: serial=123945 error=0 12:33:47 Received message from Master: op=Filter serial=123949 12:33:47 Color wheel filter change from 0 to 0 12:33:47 FLIGetFilterPos err=0 currentPosition=0 12:33:47 FLIGetStepsRemaining err=0 RemainingSteps=0 12:33:47 Filter is already there-color wheel unchanged 12:33:47 Received message from Master: op=Shutter serial=123950 12:33:47 Shutter LASER close 12:33:48 Received message from Camera: op=State serial=123952 12:33:48 GetSingleValue result=40 Value=cccccccc 12:33:48 SkyScan query 12:33:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:33:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:48 Parameters OK 12:33:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:48 Set A/D data flow result=40 12:33:48 Set A/D channel type result=40 12:33:48 Set A/D encoding result=40 12:33:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:48 Set channel filter=0.000000e+000 result=40 12:33:48 Config A/D Result=40 12:33:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:48 Get A/D filter: -9.255963e+061 result=40 12:33:48 Get A/D value=-858993460 result=40 12:33:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:48 Parameters OK 12:33:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:48 Set A/D data flow result=40 12:33:48 Set A/D channel type result=40 12:33:48 Set A/D encoding result=40 12:33:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:48 Set channel filter=0.000000e+000 result=40 12:33:48 Config A/D Result=40 12:33:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:48 Get A/D filter: -9.255963e+061 result=40 12:33:48 Get A/D value=-858993460 result=40 12:33:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:33:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:33:48 Aux= 12:33:48 Message to Camera, serial 123952 queued 12:34:25 Received message from Master: op=PointingHead serial=123965 12:34:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:34:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:34:25 Point started: ret=0 12:34:25 point_skyscan result=0 12:34:26 Check angles 12:34:26 SkyScan query 12:34:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:34:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:34:27 Message to Master queued w/err=0: serial=123965 error=0 12:34:32 Received message from Master: op=Filter serial=123966 [UTC 2019-3-5 12:34:32] 12:34:32 Color wheel filter change from 0 to 0 12:34:32 FLIGetFilterPos err=0 currentPosition=0 12:34:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:32 Filter is already there-color wheel unchanged 12:34:32 Received message from Master: op=Shutter serial=123967 12:34:32 Shutter LASER close 12:34:32 Received message from Camera: op=State serial=123969 12:34:32 GetSingleValue result=40 Value=cccccccc 12:34:32 SkyScan query 12:34:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:34:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:33 Parameters OK 12:34:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:33 Set A/D data flow result=40 12:34:33 Set A/D channel type result=40 12:34:33 Set A/D encoding result=40 12:34:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:33 Set channel filter=0.000000e+000 result=40 12:34:33 Config A/D Result=40 12:34:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:33 Get A/D filter: -9.255963e+061 result=40 12:34:33 Get A/D value=-858993460 result=40 12:34:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:33 Parameters OK 12:34:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:33 Set A/D data flow result=40 12:34:33 Set A/D channel type result=40 12:34:33 Set A/D encoding result=40 12:34:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:33 Set channel filter=0.000000e+000 result=40 12:34:33 Config A/D Result=40 12:34:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:33 Get A/D filter: -9.255963e+061 result=40 12:34:33 Get A/D value=-858993460 result=40 12:34:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:33 Aux= 12:34:33 Message to Camera, serial 123969 queued 12:35:10 Received message from Master: op=PointingHead serial=123982 12:35:10 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:35:10 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:35:10 Point started: ret=0 12:35:10 point_skyscan result=0 12:35:11 Check angles 12:35:11 SkyScan query 12:35:11 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 12:35:11 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 12:35:11 Check angles 12:35:11 SkyScan query 12:35:12 SkyScan query done: ret=0 az=153.885<-10259 ze=-6.51<-12434 Statuses=0009 0008 12:35:12 Msec=750 True Az=153.885 Ze=-6.51 Az status=0009 Ze status=0008 12:35:12 Check angles 12:35:12 SkyScan query 12:35:13 SkyScan query done: ret=0 az=171.315<-11421 ze=-6.495<-12433 Statuses=0009 0008 12:35:13 Msec=1500 True Az=171.315 Ze=-6.495 Az status=0009 Ze status=0008 12:35:13 Check angles 12:35:13 SkyScan query 12:35:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:35:13 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:35:13 Message to Master queued w/err=0: serial=123982 error=0 12:35:18 Received message from Master: op=Filter serial=123983 12:35:18 Color wheel filter change from 0 to 0 12:35:18 FLIGetFilterPos err=0 currentPosition=0 12:35:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:35:18 Filter is already there-color wheel unchanged 12:35:19 Received message from Master: op=Shutter serial=123984 12:35:19 Shutter LASER close 12:35:19 Received message from Camera: op=State serial=123986 12:35:19 GetSingleValue result=40 Value=cccccccc 12:35:19 SkyScan query 12:35:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:35:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:19 Parameters OK 12:35:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:19 Set A/D data flow result=40 12:35:19 Set A/D channel type result=40 12:35:19 Set A/D encoding result=40 12:35:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:19 Set channel filter=0.000000e+000 result=40 12:35:19 Config A/D Result=40 12:35:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:19 Get A/D filter: -9.255963e+061 result=40 12:35:19 Get A/D value=-858993460 result=40 12:35:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:19 Parameters OK 12:35:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:19 Set A/D data flow result=40 12:35:19 Set A/D channel type result=40 12:35:19 Set A/D encoding result=40 12:35:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:19 Set channel filter=0.000000e+000 result=40 12:35:19 Config A/D Result=40 12:35:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:19 Get A/D filter: -9.255963e+061 result=40 12:35:19 Get A/D value=-858993460 result=40 12:35:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:35:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:35:19 Aux= 12:35:19 Message to Camera, serial 123986 queued 12:35:55 Received message from Master: op=PointingHead serial=123998 12:35:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:35:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:35:55 Point started: ret=0 12:35:55 point_skyscan result=0 12:35:56 Check angles 12:35:56 SkyScan query 12:35:57 SkyScan query done: ret=0 az=152.61<-10174 ze=6.51<-11566 Statuses=0009 0008 12:35:57 Msec=0 True Az=152.61 Ze=6.51 Az status=0009 Ze status=0008 12:35:57 Check angles 12:35:57 SkyScan query 12:35:58 SkyScan query done: ret=0 az=135.105<-9007 ze=6.495<-11567 Statuses=0009 0008 12:35:58 Msec=750 True Az=135.105 Ze=6.495 Az status=0009 Ze status=0008 12:35:58 Check angles 12:35:58 SkyScan query 12:35:58 SkyScan query done: ret=0 az=117.675<-7845 ze=6.495<-11567 Statuses=0009 0008 12:35:58 Msec=1500 True Az=117.675 Ze=6.495 Az status=0009 Ze status=0008 12:35:58 Check angles 12:35:58 SkyScan query 12:35:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:35:59 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:35:59 Message to Master queued w/err=0: serial=123998 error=0 12:36:04 Received message from Master: op=Filter serial=123999 12:36:04 Color wheel filter change from 0 to 0 12:36:04 FLIGetFilterPos err=0 currentPosition=0 12:36:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:36:04 Filter is already there-color wheel unchanged 12:36:04 Received message from Master: op=Shutter serial=124000 12:36:04 Shutter LASER close 12:36:04 Received message from Camera: op=State serial=124002 12:36:04 GetSingleValue result=40 Value=cccccccc 12:36:04 SkyScan query 12:36:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:36:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:05 Parameters OK 12:36:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:05 Set A/D data flow result=40 12:36:05 Set A/D channel type result=40 12:36:05 Set A/D encoding result=40 12:36:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:05 Set channel filter=0.000000e+000 result=40 12:36:05 Config A/D Result=40 12:36:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:05 Get A/D filter: -9.255963e+061 result=40 12:36:05 Get A/D value=-858993460 result=40 12:36:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:05 Parameters OK 12:36:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:05 Set A/D data flow result=40 12:36:05 Set A/D channel type result=40 12:36:05 Set A/D encoding result=40 12:36:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:05 Set channel filter=0.000000e+000 result=40 12:36:05 Config A/D Result=40 12:36:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:05 Get A/D filter: -9.255963e+061 result=40 12:36:05 Get A/D value=-858993460 result=40 12:36:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:36:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:36:05 Aux= 12:36:05 Message to Camera, serial 124002 queued 12:36:42 Received message from Master: op=PointingHead serial=124015 12:36:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:36:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:36:42 Point started: ret=0 12:36:42 point_skyscan result=0 12:36:43 Check angles 12:36:43 SkyScan query 12:36:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.52<-13568 Statuses=0008 0009 12:36:43 Msec=0 True Az=112.995 Ze=-23.52 Az status=0008 Ze status=0009 12:36:44 Check angles 12:36:44 SkyScan query 12:36:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.46<-14964 Statuses=0008 0009 12:36:44 Msec=750 True Az=112.995 Ze=-44.46 Az status=0008 Ze status=0009 12:36:44 Check angles 12:36:44 SkyScan query 12:36:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.4<-16360 Statuses=0008 0009 12:36:45 Msec=1500 True Az=112.995 Ze=-65.4 Az status=0008 Ze status=0009 12:36:45 Check angles 12:36:45 SkyScan query 12:36:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.355<-17757 Statuses=0008 0009 12:36:46 Msec=2250 True Az=112.995 Ze=-86.355 Az status=0008 Ze status=0009 12:36:46 Check angles 12:36:46 SkyScan query 12:36:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.31<-19154 Statuses=0008 0009 12:36:46 Msec=3000 True Az=112.995 Ze=-107.31 Az status=0008 Ze status=0009 12:36:47 Check angles 12:36:47 SkyScan query 12:36:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.28<-20552 Statuses=0008 0009 12:36:47 Msec=3750 True Az=112.995 Ze=-128.28 Az status=0008 Ze status=0009 12:36:47 Check angles 12:36:47 SkyScan query 12:36:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.28<-21952 Statuses=0008 0009 12:36:48 Msec=4500 True Az=112.995 Ze=-149.28 Az status=0008 Ze status=0009 12:36:48 Check angles 12:36:48 SkyScan query 12:36:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.205<-23347 Statuses=0008 0009 12:36:49 Msec=5250 True Az=112.995 Ze=-170.205 Az status=0008 Ze status=0009 12:36:49 Check angles 12:36:49 SkyScan query 12:36:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:36:49 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:36:49 Message to Master queued w/err=0: serial=124015 error=0 12:36:54 Received message from Master: op=Filter serial=124016 12:36:54 Color wheel filter change from 0 to 0 12:36:54 FLIGetFilterPos err=0 currentPosition=0 12:36:54 FLIGetStepsRemaining err=0 RemainingSteps=0 12:36:54 Filter is already there-color wheel unchanged 12:36:55 Received message from Master: op=Shutter serial=124017 12:36:55 Shutter LASER open 12:36:55 Received message from Camera: op=State serial=124019 12:36:55 GetSingleValue result=40 Value=cccccccc 12:36:55 SkyScan query 12:36:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:36:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:55 Parameters OK 12:36:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:55 Set A/D data flow result=40 12:36:55 Set A/D channel type result=40 12:36:55 Set A/D encoding result=40 12:36:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:55 Set channel filter=0.000000e+000 result=40 12:36:55 Config A/D Result=40 12:36:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:55 Get A/D filter: -9.255963e+061 result=40 12:36:55 Get A/D value=-858993460 result=40 12:36:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:55 Parameters OK 12:36:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:55 Set A/D data flow result=40 12:36:55 Set A/D channel type result=40 12:36:55 Set A/D encoding result=40 12:36:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:55 Set channel filter=0.000000e+000 result=40 12:36:55 Config A/D Result=40 12:36:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:55 Get A/D filter: -9.255963e+061 result=40 12:36:55 Get A/D value=-858993460 result=40 12:36:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:36:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:36:55 Aux= 12:36:55 Message to Camera, serial 124019 queued 12:37:04 Received message from Master: op=Shutter serial=124029 12:37:04 Shutter LASER close 12:37:04 Received message from Master: op=PointingHead serial=124033 12:37:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:37:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:37:04 Point started: ret=0 12:37:04 point_skyscan result=0 12:37:05 Check angles 12:37:05 SkyScan query 12:37:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 12:37:06 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 12:37:06 Check angles 12:37:06 SkyScan query 12:37:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.28<-20152 Statuses=0008 0009 12:37:07 Msec=750 True Az=112.995 Ze=-122.28 Az status=0008 Ze status=0009 12:37:07 Check angles 12:37:07 SkyScan query 12:37:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.355<-18757 Statuses=0008 0009 12:37:07 Msec=1500 True Az=112.995 Ze=-101.355 Az status=0008 Ze status=0009 12:37:07 Check angles 12:37:07 SkyScan query 12:37:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.385<-17359 Statuses=0008 0009 12:37:08 Msec=2250 True Az=112.995 Ze=-80.385 Az status=0008 Ze status=0009 12:37:08 Check angles 12:37:08 SkyScan query 12:37:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.43<-15962 Statuses=0008 0009 12:37:09 Msec=3000 True Az=112.995 Ze=-59.43 Az status=0008 Ze status=0009 12:37:09 Check angles 12:37:09 SkyScan query 12:37:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.43<-14562 Statuses=0008 0009 12:37:10 Msec=3750 True Az=112.995 Ze=-38.43 Az status=0008 Ze status=0009 12:37:10 Check angles 12:37:10 SkyScan query 12:37:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.475<-13165 Statuses=0008 0009 12:37:10 Msec=4500 True Az=112.995 Ze=-17.475 Az status=0008 Ze status=0009 12:37:10 Check angles 12:37:10 SkyScan query 12:37:11 SkyScan query done: ret=0 az=112.98<-7532 ze=3.495<-11767 Statuses=0008 0009 12:37:11 Msec=5250 True Az=112.98 Ze=3.495 Az status=0008 Ze status=0009 12:37:11 Check angles 12:37:11 SkyScan query 12:37:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:37:12 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:37:12 Message to Master queued w/err=0: serial=124033 error=0 12:37:17 Received message from Master: op=Filter serial=124034 12:37:17 Color wheel filter change from 0 to 0 12:37:17 FLIGetFilterPos err=0 currentPosition=0 12:37:17 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:17 Filter is already there-color wheel unchanged 12:37:17 Received message from Master: op=Shutter serial=124035 12:37:17 Shutter LASER close 12:37:17 Received message from Camera: op=State serial=124037 12:37:17 GetSingleValue result=40 Value=cccccccc 12:37:17 SkyScan query 12:37:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:37:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:18 Parameters OK 12:37:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:18 Set A/D data flow result=40 12:37:18 Set A/D channel type result=40 12:37:18 Set A/D encoding result=40 12:37:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:18 Set channel filter=0.000000e+000 result=40 12:37:18 Config A/D Result=40 12:37:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:18 Get A/D filter: -9.255963e+061 result=40 12:37:18 Get A/D value=-858993460 result=40 12:37:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:18 Parameters OK 12:37:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:18 Set A/D data flow result=40 12:37:18 Set A/D channel type result=40 12:37:18 Set A/D encoding result=40 12:37:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:18 Set channel filter=0.000000e+000 result=40 12:37:18 Config A/D Result=40 12:37:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:18 Get A/D filter: -9.255963e+061 result=40 12:37:18 Get A/D value=-858993460 result=40 12:37:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:18 Aux= 12:37:18 Message to Camera, serial 124037 queued 12:37:55 Received message from Master: op=PointingHead serial=124050 12:37:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:37:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:37:55 Point started: ret=0 12:37:55 point_skyscan result=0 12:37:56 Check angles 12:37:56 SkyScan query 12:37:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:37:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:37:56 Message to Master queued w/err=0: serial=124050 error=0 12:38:01 Received message from Master: op=Filter serial=124051 12:38:01 Color wheel filter change from 0 to 0 12:38:01 FLIGetFilterPos err=0 currentPosition=0 12:38:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:38:01 Filter is already there-color wheel unchanged 12:38:01 Received message from Master: op=Shutter serial=124052 12:38:01 Shutter LASER close 12:38:01 Received message from Camera: op=State serial=124054 12:38:01 GetSingleValue result=40 Value=cccccccc 12:38:01 SkyScan query 12:38:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:38:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:02 Parameters OK 12:38:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:02 Set A/D data flow result=40 12:38:02 Set A/D channel type result=40 12:38:02 Set A/D encoding result=40 12:38:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:02 Set channel filter=0.000000e+000 result=40 12:38:02 Config A/D Result=40 12:38:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:02 Get A/D filter: -9.255963e+061 result=40 12:38:02 Get A/D value=-858993460 result=40 12:38:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:02 Parameters OK 12:38:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:02 Set A/D data flow result=40 12:38:02 Set A/D channel type result=40 12:38:02 Set A/D encoding result=40 12:38:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:02 Set channel filter=0.000000e+000 result=40 12:38:02 Config A/D Result=40 12:38:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:02 Get A/D filter: -9.255963e+061 result=40 12:38:02 Get A/D value=-858993460 result=40 12:38:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:38:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:38:02 Aux= 12:38:02 Message to Camera, serial 124054 queued 12:38:39 Received message from Master: op=PointingHead serial=124067 12:38:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:38:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:38:39 Point started: ret=0 12:38:39 point_skyscan result=0 12:38:40 Check angles 12:38:40 SkyScan query 12:38:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:38:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:38:41 Message to Master queued w/err=0: serial=124067 error=0 12:38:46 Received message from Master: op=Filter serial=124068 12:38:46 Color wheel filter change from 0 to 0 12:38:46 FLIGetFilterPos err=0 currentPosition=0 12:38:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:38:46 Filter is already there-color wheel unchanged 12:38:46 Received message from Master: op=Shutter serial=124069 12:38:46 Shutter LASER close 12:38:46 Received message from Camera: op=State serial=124071 12:38:46 GetSingleValue result=40 Value=cccccccc 12:38:46 SkyScan query 12:38:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:38:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:46 Parameters OK 12:38:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:46 Set A/D data flow result=40 12:38:46 Set A/D channel type result=40 12:38:46 Set A/D encoding result=40 12:38:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:46 Set channel filter=0.000000e+000 result=40 12:38:46 Config A/D Result=40 12:38:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:46 Get A/D filter: -9.255963e+061 result=40 12:38:46 Get A/D value=-858993460 result=40 12:38:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:46 Parameters OK 12:38:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:46 Set A/D data flow result=40 12:38:46 Set A/D channel type result=40 12:38:46 Set A/D encoding result=40 12:38:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:46 Set channel filter=0.000000e+000 result=40 12:38:46 Config A/D Result=40 12:38:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:46 Get A/D filter: -9.255963e+061 result=40 12:38:46 Get A/D value=-858993460 result=40 12:38:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:38:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:38:46 Aux= 12:38:46 Message to Camera, serial 124071 queued 12:39:23 Received message from Master: op=PointingHead serial=124084 12:39:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:39:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:39:24 Point started: ret=0 12:39:24 point_skyscan result=0 12:39:24 Check angles 12:39:24 SkyScan query 12:39:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:39:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:39:25 Message to Master queued w/err=0: serial=124084 error=0 12:39:30 Received message from Master: op=Filter serial=124085 12:39:30 Color wheel filter change from 0 to 0 12:39:30 FLIGetFilterPos err=0 currentPosition=0 12:39:30 FLIGetStepsRemaining err=0 RemainingSteps=0 12:39:30 Filter is already there-color wheel unchanged 12:39:30 Received message from Master: op=Shutter serial=124086 12:39:30 Shutter LASER close 12:39:30 Received message from Camera: op=State serial=124088 12:39:30 GetSingleValue result=40 Value=cccccccc 12:39:30 SkyScan query 12:39:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:39:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:31 Parameters OK 12:39:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:31 Set A/D data flow result=40 12:39:31 Set A/D channel type result=40 12:39:31 Set A/D encoding result=40 12:39:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:31 Set channel filter=0.000000e+000 result=40 12:39:31 Config A/D Result=40 12:39:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:31 Get A/D filter: -9.255963e+061 result=40 12:39:31 Get A/D value=-858993460 result=40 12:39:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:31 Parameters OK 12:39:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:31 Set A/D data flow result=40 12:39:31 Set A/D channel type result=40 12:39:31 Set A/D encoding result=40 12:39:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:31 Set channel filter=0.000000e+000 result=40 12:39:31 Config A/D Result=40 12:39:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:31 Get A/D filter: -9.255963e+061 result=40 12:39:31 Get A/D value=-858993460 result=40 12:39:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:39:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:39:31 Aux= 12:39:31 Message to Camera, serial 124088 queued 12:40:08 Received message from Master: op=PointingHead serial=124101 12:40:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:40:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:40:08 Point started: ret=0 12:40:08 point_skyscan result=0 12:40:09 Check angles 12:40:09 SkyScan query 12:40:09 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.655<-13577 Statuses=0008 0009 12:40:09 Msec=0 True Az=112.98 Ze=-23.655 Az status=0008 Ze status=0009 12:40:09 Check angles 12:40:09 SkyScan query 12:40:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.015<-15001 Statuses=0008 0009 12:40:10 Msec=750 True Az=112.995 Ze=-45.015 Az status=0008 Ze status=0009 12:40:10 Check angles 12:40:10 SkyScan query 12:40:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-66<-16400 Statuses=0008 0009 12:40:11 Msec=1500 True Az=112.995 Ze=-66 Az status=0008 Ze status=0009 12:40:11 Check angles 12:40:11 SkyScan query 12:40:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.97<-17798 Statuses=0008 0009 12:40:11 Msec=2250 True Az=112.995 Ze=-86.97 Az status=0008 Ze status=0009 12:40:12 Check angles 12:40:12 SkyScan query 12:40:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.405<-19227 Statuses=0008 0009 12:40:12 Msec=3000 True Az=112.995 Ze=-108.405 Az status=0008 Ze status=0009 12:40:12 Check angles 12:40:12 SkyScan query 12:40:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.735<-20649 Statuses=0008 0009 12:40:13 Msec=3750 True Az=112.995 Ze=-129.735 Az status=0008 Ze status=0009 12:40:13 Check angles 12:40:13 SkyScan query 12:40:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.645<-22043 Statuses=0008 0009 12:40:14 Msec=4500 True Az=112.995 Ze=-150.645 Az status=0008 Ze status=0009 12:40:14 Check angles 12:40:14 SkyScan query 12:40:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.36<-23424 Statuses=0008 0009 12:40:15 Msec=5250 True Az=112.995 Ze=-171.36 Az status=0008 Ze status=0009 12:40:15 Check angles 12:40:15 SkyScan query 12:40:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:40:15 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:40:15 Message to Master queued w/err=0: serial=124101 error=0 12:40:20 Received message from Master: op=Filter serial=124102 12:40:20 Color wheel filter change from 0 to 0 12:40:20 FLIGetFilterPos err=0 currentPosition=0 12:40:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:40:20 Filter is already there-color wheel unchanged 12:40:20 Received message from Master: op=Shutter serial=124103 12:40:20 Shutter LASER open 12:40:21 Received message from Camera: op=State serial=124105 12:40:21 GetSingleValue result=40 Value=cccccccc 12:40:21 SkyScan query 12:40:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:40:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:21 Parameters OK 12:40:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:21 Set A/D data flow result=40 12:40:21 Set A/D channel type result=40 12:40:21 Set A/D encoding result=40 12:40:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:21 Set channel filter=0.000000e+000 result=40 12:40:21 Config A/D Result=40 12:40:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:21 Get A/D filter: -9.255963e+061 result=40 12:40:21 Get A/D value=-858993460 result=40 12:40:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:21 Parameters OK 12:40:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:21 Set A/D data flow result=40 12:40:21 Set A/D channel type result=40 12:40:21 Set A/D encoding result=40 12:40:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:21 Set channel filter=0.000000e+000 result=40 12:40:21 Config A/D Result=40 12:40:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:21 Get A/D filter: -9.255963e+061 result=40 12:40:21 Get A/D value=-858993460 result=40 12:40:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:40:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:40:21 Aux= 12:40:21 Message to Camera, serial 124105 queued 12:40:30 Received message from Master: op=Shutter serial=124115 12:40:30 Shutter LASER close 12:40:30 Received message from Master: op=PointingHead serial=124119 12:40:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:40:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:40:31 Point started: ret=0 12:40:31 point_skyscan result=0 12:40:31 Check angles 12:40:31 SkyScan query 12:40:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 12:40:32 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 12:40:32 Check angles 12:40:32 SkyScan query 12:40:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 12:40:33 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 12:40:33 Check angles 12:40:33 SkyScan query 12:40:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.31<-18754 Statuses=0008 0009 12:40:33 Msec=1500 True Az=112.995 Ze=-101.31 Az status=0008 Ze status=0009 12:40:34 Check angles 12:40:34 SkyScan query 12:40:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.325<-17355 Statuses=0008 0009 12:40:34 Msec=2250 True Az=112.995 Ze=-80.325 Az status=0008 Ze status=0009 12:40:34 Check angles 12:40:34 SkyScan query 12:40:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.89<-15926 Statuses=0008 0009 12:40:35 Msec=3000 True Az=112.995 Ze=-58.89 Az status=0008 Ze status=0009 12:40:35 Check angles 12:40:35 SkyScan query 12:40:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.89<-14526 Statuses=0008 0009 12:40:36 Msec=3750 True Az=112.995 Ze=-37.89 Az status=0008 Ze status=0009 12:40:36 Check angles 12:40:36 SkyScan query 12:40:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.935<-13129 Statuses=0008 0009 12:40:36 Msec=4500 True Az=112.995 Ze=-16.935 Az status=0008 Ze status=0009 12:40:37 Check angles 12:40:37 SkyScan query 12:40:37 SkyScan query done: ret=0 az=112.995<-7533 ze=3.99<-11734 Statuses=0008 0009 12:40:37 Msec=5250 True Az=112.995 Ze=3.99 Az status=0008 Ze status=0009 12:40:37 Check angles 12:40:37 SkyScan query 12:40:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:40:38 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:40:38 Message to Master queued w/err=0: serial=124119 error=0 12:40:43 Received message from Master: op=Filter serial=124120 12:40:43 Color wheel filter change from 0 to 0 12:40:43 FLIGetFilterPos err=0 currentPosition=0 12:40:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:40:43 Filter is already there-color wheel unchanged 12:40:43 Received message from Master: op=Shutter serial=124121 12:40:43 Shutter LASER close 12:40:43 Received message from Camera: op=State serial=124123 12:40:43 GetSingleValue result=40 Value=cccccccc 12:40:43 SkyScan query 12:40:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:40:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:44 Parameters OK 12:40:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:44 Set A/D data flow result=40 12:40:44 Set A/D channel type result=40 12:40:44 Set A/D encoding result=40 12:40:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:44 Set channel filter=0.000000e+000 result=40 12:40:44 Config A/D Result=40 12:40:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:44 Get A/D filter: -9.255963e+061 result=40 12:40:44 Get A/D value=-858993460 result=40 12:40:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:44 Parameters OK 12:40:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:44 Set A/D data flow result=40 12:40:44 Set A/D channel type result=40 12:40:44 Set A/D encoding result=40 12:40:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:44 Set channel filter=0.000000e+000 result=40 12:40:44 Config A/D Result=40 12:40:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:44 Get A/D filter: -9.255963e+061 result=40 12:40:44 Get A/D value=-858993460 result=40 12:40:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:40:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:40:44 Aux= 12:40:44 Message to Camera, serial 124123 queued 12:41:21 Received message from Master: op=PointingHead serial=124136 12:41:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:41:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:41:21 Point started: ret=0 12:41:21 point_skyscan result=0 12:41:22 Check angles 12:41:22 SkyScan query 12:41:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:41:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:41:22 Message to Master queued w/err=0: serial=124136 error=0 12:41:27 Received message from Master: op=Filter serial=124137 12:41:27 Color wheel filter change from 0 to 0 12:41:27 FLIGetFilterPos err=0 currentPosition=0 12:41:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:41:27 Filter is already there-color wheel unchanged 12:41:28 Received message from Master: op=Shutter serial=124138 12:41:28 Shutter LASER close 12:41:28 Received message from Camera: op=State serial=124140 12:41:28 GetSingleValue result=40 Value=cccccccc 12:41:28 SkyScan query 12:41:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:41:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:28 Parameters OK 12:41:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:28 Set A/D data flow result=40 12:41:28 Set A/D channel type result=40 12:41:28 Set A/D encoding result=40 12:41:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:28 Set channel filter=0.000000e+000 result=40 12:41:28 Config A/D Result=40 12:41:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:28 Get A/D filter: -9.255963e+061 result=40 12:41:28 Get A/D value=-858993460 result=40 12:41:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:28 Parameters OK 12:41:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:28 Set A/D data flow result=40 12:41:28 Set A/D channel type result=40 12:41:28 Set A/D encoding result=40 12:41:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:28 Set channel filter=0.000000e+000 result=40 12:41:28 Config A/D Result=40 12:41:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:28 Get A/D filter: -9.255963e+061 result=40 12:41:28 Get A/D value=-858993460 result=40 12:41:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:41:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:41:28 Aux= 12:41:28 Message to Camera, serial 124140 queued 12:42:05 Received message from Master: op=PointingHead serial=124153 12:42:05 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:42:05 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:42:05 Point started: ret=0 12:42:05 point_skyscan result=0 12:42:06 Check angles 12:42:06 SkyScan query 12:42:07 SkyScan query done: ret=0 az=136.17<-9078 ze=-6.51<-12434 Statuses=0009 0008 12:42:07 Msec=0 True Az=136.17 Ze=-6.51 Az status=0009 Ze status=0008 12:42:07 Check angles 12:42:07 SkyScan query 12:42:07 SkyScan query done: ret=0 az=153.645<-10243 ze=-6.495<-12433 Statuses=0009 0008 12:42:07 Msec=750 True Az=153.645 Ze=-6.495 Az status=0009 Ze status=0008 12:42:08 Check angles 12:42:08 SkyScan query 12:42:08 SkyScan query done: ret=0 az=171.135<-11409 ze=-6.495<-12433 Statuses=0009 0008 12:42:08 Msec=1500 True Az=171.135 Ze=-6.495 Az status=0009 Ze status=0008 12:42:08 Check angles 12:42:08 SkyScan query 12:42:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:42:09 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:42:09 Message to Master queued w/err=0: serial=124153 error=0 12:42:14 Received message from Master: op=Filter serial=124154 12:42:14 Color wheel filter change from 0 to 0 12:42:14 FLIGetFilterPos err=0 currentPosition=0 12:42:14 FLIGetStepsRemaining err=0 RemainingSteps=0 12:42:14 Filter is already there-color wheel unchanged 12:42:14 Received message from Master: op=Shutter serial=124155 12:42:14 Shutter LASER close 12:42:14 Received message from Camera: op=State serial=124157 12:42:14 GetSingleValue result=40 Value=cccccccc 12:42:14 SkyScan query 12:42:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:42:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:15 Parameters OK 12:42:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:15 Set A/D data flow result=40 12:42:15 Set A/D channel type result=40 12:42:15 Set A/D encoding result=40 12:42:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:15 Set channel filter=0.000000e+000 result=40 12:42:15 Config A/D Result=40 12:42:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:15 Get A/D filter: -9.255963e+061 result=40 12:42:15 Get A/D value=-858993460 result=40 12:42:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:15 Parameters OK 12:42:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:15 Set A/D data flow result=40 12:42:15 Set A/D channel type result=40 12:42:15 Set A/D encoding result=40 12:42:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:15 Set channel filter=0.000000e+000 result=40 12:42:15 Config A/D Result=40 12:42:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:15 Get A/D filter: -9.255963e+061 result=40 12:42:15 Get A/D value=-858993460 result=40 12:42:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:42:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:42:15 Aux= 12:42:15 Message to Camera, serial 124157 queued 12:42:52 Received message from Master: op=PointingHead serial=124170 12:42:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:42:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:42:52 Point started: ret=0 12:42:52 point_skyscan result=0 12:42:53 Check angles 12:42:53 SkyScan query 12:42:53 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 12:42:53 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 12:42:53 Check angles 12:42:53 SkyScan query 12:42:54 SkyScan query done: ret=0 az=135.36<-9024 ze=6.495<-11567 Statuses=0009 0008 12:42:54 Msec=750 True Az=135.36 Ze=6.495 Az status=0009 Ze status=0008 12:42:54 Check angles 12:42:54 SkyScan query 12:42:55 SkyScan query done: ret=0 az=117.6<-7840 ze=6.495<-11567 Statuses=0009 0008 12:42:55 Msec=1500 True Az=117.6 Ze=6.495 Az status=0009 Ze status=0008 12:42:55 Check angles 12:42:55 SkyScan query 12:42:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:42:55 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:42:55 Message to Master queued w/err=0: serial=124170 error=0 12:43:00 Received message from Master: op=Filter serial=124171 12:43:00 Color wheel filter change from 0 to 0 12:43:00 FLIGetFilterPos err=0 currentPosition=0 12:43:00 FLIGetStepsRemaining err=0 RemainingSteps=0 12:43:00 Filter is already there-color wheel unchanged 12:43:01 Received message from Master: op=Shutter serial=124172 12:43:01 Shutter LASER close 12:43:01 Received message from Camera: op=State serial=124174 12:43:01 GetSingleValue result=40 Value=cccccccc 12:43:01 SkyScan query 12:43:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:43:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:01 Parameters OK 12:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:01 Set A/D data flow result=40 12:43:01 Set A/D channel type result=40 12:43:01 Set A/D encoding result=40 12:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:01 Set channel filter=0.000000e+000 result=40 12:43:01 Config A/D Result=40 12:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:01 Get A/D filter: -9.255963e+061 result=40 12:43:01 Get A/D value=-858993460 result=40 12:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:01 Parameters OK 12:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:01 Set A/D data flow result=40 12:43:01 Set A/D channel type result=40 12:43:01 Set A/D encoding result=40 12:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:01 Set channel filter=0.000000e+000 result=40 12:43:01 Config A/D Result=40 12:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:01 Get A/D filter: -9.255963e+061 result=40 12:43:01 Get A/D value=-858993460 result=40 12:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:01 Aux= 12:43:01 Message to Camera, serial 124174 queued 12:43:38 Received message from Master: op=PointingHead serial=124187 12:43:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:43:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:43:38 Point started: ret=0 12:43:38 point_skyscan result=0 12:43:39 Check angles 12:43:39 SkyScan query 12:43:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 12:43:40 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 12:43:40 Check angles 12:43:40 SkyScan query 12:43:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 12:43:41 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 12:43:41 Check angles 12:43:41 SkyScan query 12:43:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 12:43:41 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 12:43:41 Check angles 12:43:41 SkyScan query 12:43:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 12:43:42 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 12:43:42 Check angles 12:43:42 SkyScan query 12:43:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.925<-19195 Statuses=0008 0009 12:43:43 Msec=3000 True Az=112.995 Ze=-107.925 Az status=0008 Ze status=0009 12:43:43 Check angles 12:43:43 SkyScan query 12:43:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.85<-20590 Statuses=0008 0009 12:43:44 Msec=3750 True Az=112.995 Ze=-128.85 Az status=0008 Ze status=0009 12:43:44 Check angles 12:43:44 SkyScan query 12:43:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 12:43:44 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 12:43:44 Check angles 12:43:44 SkyScan query 12:43:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.73<-23382 Statuses=0008 0009 12:43:45 Msec=5250 True Az=112.995 Ze=-170.73 Az status=0008 Ze status=0009 12:43:45 Check angles 12:43:45 SkyScan query 12:43:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:43:46 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:43:46 Message to Master queued w/err=0: serial=124187 error=0 [UTC 2019-3-5 12:43:50] 12:43:51 Received message from Master: op=Filter serial=124188 12:43:51 Color wheel filter change from 0 to 0 12:43:51 FLIGetFilterPos err=0 currentPosition=0 12:43:51 FLIGetStepsRemaining err=0 RemainingSteps=0 12:43:51 Filter is already there-color wheel unchanged 12:43:51 Received message from Master: op=Shutter serial=124189 12:43:51 Shutter LASER open 12:43:51 Received message from Camera: op=State serial=124191 12:43:51 GetSingleValue result=40 Value=cccccccc 12:43:51 SkyScan query 12:43:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:43:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:52 Parameters OK 12:43:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:52 Set A/D data flow result=40 12:43:52 Set A/D channel type result=40 12:43:52 Set A/D encoding result=40 12:43:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:52 Set channel filter=0.000000e+000 result=40 12:43:52 Config A/D Result=40 12:43:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:52 Get A/D filter: -9.255963e+061 result=40 12:43:52 Get A/D value=-858993460 result=40 12:43:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:52 Parameters OK 12:43:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:52 Set A/D data flow result=40 12:43:52 Set A/D channel type result=40 12:43:52 Set A/D encoding result=40 12:43:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:52 Set channel filter=0.000000e+000 result=40 12:43:52 Config A/D Result=40 12:43:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:52 Get A/D filter: -9.255963e+061 result=40 12:43:52 Get A/D value=-858993460 result=40 12:43:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:52 Aux= 12:43:52 Message to Camera, serial 124191 queued 12:43:59 Received message from Master: op=Shutter serial=124200 12:43:59 Shutter LASER close 12:44:00 Received message from Master: op=PointingHead serial=124204 12:44:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:44:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:44:00 Point started: ret=0 12:44:00 point_skyscan result=0 12:44:01 Check angles 12:44:01 SkyScan query 12:44:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 12:44:01 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 12:44:02 Check angles 12:44:02 SkyScan query 12:44:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.49<-20166 Statuses=0008 0009 12:44:02 Msec=750 True Az=112.995 Ze=-122.49 Az status=0008 Ze status=0009 12:44:02 Check angles 12:44:02 SkyScan query 12:44:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.535<-18769 Statuses=0008 0009 12:44:03 Msec=1500 True Az=112.995 Ze=-101.535 Az status=0008 Ze status=0009 12:44:03 Check angles 12:44:03 SkyScan query 12:44:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 12:44:04 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 12:44:04 Check angles 12:44:04 SkyScan query 12:44:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.175<-15945 Statuses=0008 0009 12:44:04 Msec=3000 True Az=112.995 Ze=-59.175 Az status=0008 Ze status=0009 12:44:05 Check angles 12:44:05 SkyScan query 12:44:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.695<-14513 Statuses=0008 0009 12:44:05 Msec=3750 True Az=112.995 Ze=-37.695 Az status=0008 Ze status=0009 12:44:05 Check angles 12:44:05 SkyScan query 12:44:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.74<-13116 Statuses=0008 0009 12:44:06 Msec=4500 True Az=112.995 Ze=-16.74 Az status=0008 Ze status=0009 12:44:06 Check angles 12:44:06 SkyScan query 12:44:07 SkyScan query done: ret=0 az=113.01<-7534 ze=4.17<-11722 Statuses=0008 0009 12:44:07 Msec=5250 True Az=113.01 Ze=4.17 Az status=0008 Ze status=0009 12:44:07 Check angles 12:44:07 SkyScan query 12:44:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:44:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:44:07 Message to Master queued w/err=0: serial=124204 error=0 12:44:12 Received message from Master: op=Filter serial=124205 12:44:12 Color wheel filter change from 0 to 0 12:44:12 FLIGetFilterPos err=0 currentPosition=0 12:44:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:12 Filter is already there-color wheel unchanged 12:44:13 Received message from Master: op=Shutter serial=124206 12:44:13 Shutter LASER close 12:44:13 Received message from Camera: op=State serial=124208 12:44:13 GetSingleValue result=40 Value=cccccccc 12:44:13 SkyScan query 12:44:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:44:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:13 Parameters OK 12:44:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:13 Set A/D data flow result=40 12:44:13 Set A/D channel type result=40 12:44:13 Set A/D encoding result=40 12:44:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:13 Set channel filter=0.000000e+000 result=40 12:44:13 Config A/D Result=40 12:44:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:13 Get A/D filter: -9.255963e+061 result=40 12:44:13 Get A/D value=-858993460 result=40 12:44:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:13 Parameters OK 12:44:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:13 Set A/D data flow result=40 12:44:13 Set A/D channel type result=40 12:44:13 Set A/D encoding result=40 12:44:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:13 Set channel filter=0.000000e+000 result=40 12:44:13 Config A/D Result=40 12:44:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:13 Get A/D filter: -9.255963e+061 result=40 12:44:13 Get A/D value=-858993460 result=40 12:44:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:13 Aux= 12:44:13 Message to Camera, serial 124208 queued 12:44:50 Received message from Master: op=PointingHead serial=124221 12:44:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:44:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:44:51 Point started: ret=0 12:44:51 point_skyscan result=0 12:44:51 Check angles 12:44:51 SkyScan query 12:44:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:44:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:44:52 Message to Master queued w/err=0: serial=124221 error=0 12:44:57 Received message from Master: op=Filter serial=124222 12:44:57 Color wheel filter change from 0 to 0 12:44:57 FLIGetFilterPos err=0 currentPosition=0 12:44:57 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:57 Filter is already there-color wheel unchanged 12:44:57 Received message from Master: op=Shutter serial=124223 12:44:57 Shutter LASER close 12:44:57 Received message from Camera: op=State serial=124225 12:44:57 GetSingleValue result=40 Value=cccccccc 12:44:57 SkyScan query 12:44:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:44:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:58 Parameters OK 12:44:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:58 Set A/D data flow result=40 12:44:58 Set A/D channel type result=40 12:44:58 Set A/D encoding result=40 12:44:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:58 Set channel filter=0.000000e+000 result=40 12:44:58 Config A/D Result=40 12:44:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:58 Get A/D filter: -9.255963e+061 result=40 12:44:58 Get A/D value=-858993460 result=40 12:44:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:58 Parameters OK 12:44:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:58 Set A/D data flow result=40 12:44:58 Set A/D channel type result=40 12:44:58 Set A/D encoding result=40 12:44:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:58 Set channel filter=0.000000e+000 result=40 12:44:58 Config A/D Result=40 12:44:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:58 Get A/D filter: -9.255963e+061 result=40 12:44:58 Get A/D value=-858993460 result=40 12:44:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:58 Aux= 12:44:58 Message to Camera, serial 124225 queued 12:45:34 Received message from Master: op=PointingHead serial=124238 12:45:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:45:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:45:35 Point started: ret=0 12:45:35 point_skyscan result=0 12:45:36 Check angles 12:45:36 SkyScan query 12:45:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:45:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:45:36 Message to Master queued w/err=0: serial=124238 error=0 12:45:41 Received message from Master: op=Filter serial=124239 12:45:41 Color wheel filter change from 0 to 0 12:45:41 FLIGetFilterPos err=0 currentPosition=0 12:45:41 FLIGetStepsRemaining err=0 RemainingSteps=0 12:45:41 Filter is already there-color wheel unchanged 12:45:41 Received message from Master: op=Shutter serial=124240 12:45:41 Shutter LASER close 12:45:41 Received message from Camera: op=State serial=124242 12:45:41 GetSingleValue result=40 Value=cccccccc 12:45:41 SkyScan query 12:45:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:45:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:42 Parameters OK 12:45:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:42 Set A/D data flow result=40 12:45:42 Set A/D channel type result=40 12:45:42 Set A/D encoding result=40 12:45:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:42 Set channel filter=0.000000e+000 result=40 12:45:42 Config A/D Result=40 12:45:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:42 Get A/D filter: -9.255963e+061 result=40 12:45:42 Get A/D value=-858993460 result=40 12:45:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:42 Parameters OK 12:45:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:42 Set A/D data flow result=40 12:45:42 Set A/D channel type result=40 12:45:42 Set A/D encoding result=40 12:45:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:42 Set channel filter=0.000000e+000 result=40 12:45:42 Config A/D Result=40 12:45:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:42 Get A/D filter: -9.255963e+061 result=40 12:45:42 Get A/D value=-858993460 result=40 12:45:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:45:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:45:42 Aux= 12:45:42 Message to Camera, serial 124242 queued 12:46:19 Received message from Master: op=PointingHead serial=124255 12:46:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:46:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:46:19 Point started: ret=0 12:46:19 point_skyscan result=0 12:46:20 Check angles 12:46:20 SkyScan query 12:46:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:46:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:46:20 Message to Master queued w/err=0: serial=124255 error=0 12:46:25 Received message from Master: op=Filter serial=124256 12:46:25 Color wheel filter change from 0 to 0 12:46:25 FLIGetFilterPos err=0 currentPosition=0 12:46:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:46:25 Filter is already there-color wheel unchanged 12:46:26 Received message from Master: op=Shutter serial=124257 12:46:26 Shutter LASER close 12:46:26 Received message from Camera: op=State serial=124259 12:46:26 GetSingleValue result=40 Value=cccccccc 12:46:26 SkyScan query 12:46:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:46:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:26 Parameters OK 12:46:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:26 Set A/D data flow result=40 12:46:26 Set A/D channel type result=40 12:46:26 Set A/D encoding result=40 12:46:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:26 Set channel filter=0.000000e+000 result=40 12:46:26 Config A/D Result=40 12:46:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:26 Get A/D filter: -9.255963e+061 result=40 12:46:26 Get A/D value=-858993460 result=40 12:46:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:26 Parameters OK 12:46:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:26 Set A/D data flow result=40 12:46:26 Set A/D channel type result=40 12:46:26 Set A/D encoding result=40 12:46:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:26 Set channel filter=0.000000e+000 result=40 12:46:26 Config A/D Result=40 12:46:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:26 Get A/D filter: -9.255963e+061 result=40 12:46:26 Get A/D value=-858993460 result=40 12:46:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:46:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:46:26 Aux= 12:46:26 Message to Camera, serial 124259 queued 12:47:03 Received message from Master: op=PointingHead serial=124272 12:47:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:47:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:47:03 Point started: ret=0 12:47:03 point_skyscan result=0 12:47:04 Check angles 12:47:04 SkyScan query 12:47:05 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.565<-13571 Statuses=0008 0009 12:47:05 Msec=0 True Az=112.98 Ze=-23.565 Az status=0008 Ze status=0009 12:47:05 Check angles 12:47:05 SkyScan query 12:47:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.94<-14996 Statuses=0008 0009 12:47:06 Msec=750 True Az=112.995 Ze=-44.94 Az status=0008 Ze status=0009 12:47:06 Check angles 12:47:06 SkyScan query 12:47:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.91<-16394 Statuses=0008 0009 12:47:06 Msec=1500 True Az=112.995 Ze=-65.91 Az status=0008 Ze status=0009 12:47:06 Check angles 12:47:06 SkyScan query 12:47:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.895<-17793 Statuses=0008 0009 12:47:07 Msec=2250 True Az=112.995 Ze=-86.895 Az status=0008 Ze status=0009 12:47:07 Check angles 12:47:07 SkyScan query 12:47:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.865<-19191 Statuses=0008 0009 12:47:08 Msec=3000 True Az=112.995 Ze=-107.865 Az status=0008 Ze status=0009 12:47:08 Check angles 12:47:08 SkyScan query 12:47:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.79<-20586 Statuses=0008 0009 12:47:09 Msec=3750 True Az=112.995 Ze=-128.79 Az status=0008 Ze status=0009 12:47:09 Check angles 12:47:09 SkyScan query 12:47:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.775<-21985 Statuses=0008 0009 12:47:09 Msec=4500 True Az=112.995 Ze=-149.775 Az status=0008 Ze status=0009 12:47:09 Check angles 12:47:09 SkyScan query 12:47:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.7<-23380 Statuses=0008 0009 12:47:10 Msec=5250 True Az=112.995 Ze=-170.7 Az status=0008 Ze status=0009 12:47:10 Check angles 12:47:10 SkyScan query 12:47:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:47:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:47:11 Message to Master queued w/err=0: serial=124272 error=0 12:47:16 Received message from Master: op=Filter serial=124273 12:47:16 Color wheel filter change from 0 to 0 12:47:16 FLIGetFilterPos err=0 currentPosition=0 12:47:16 FLIGetStepsRemaining err=0 RemainingSteps=0 12:47:16 Filter is already there-color wheel unchanged 12:47:16 Received message from Master: op=Shutter serial=124274 12:47:16 Shutter LASER open 12:47:16 Received message from Camera: op=State serial=124276 12:47:16 GetSingleValue result=40 Value=cccccccc 12:47:16 SkyScan query 12:47:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:47:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:17 Parameters OK 12:47:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:17 Set A/D data flow result=40 12:47:17 Set A/D channel type result=40 12:47:17 Set A/D encoding result=40 12:47:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:17 Set channel filter=0.000000e+000 result=40 12:47:17 Config A/D Result=40 12:47:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:17 Get A/D filter: -9.255963e+061 result=40 12:47:17 Get A/D value=-858993460 result=40 12:47:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:17 Parameters OK 12:47:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:17 Set A/D data flow result=40 12:47:17 Set A/D channel type result=40 12:47:17 Set A/D encoding result=40 12:47:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:17 Set channel filter=0.000000e+000 result=40 12:47:17 Config A/D Result=40 12:47:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:17 Get A/D filter: -9.255963e+061 result=40 12:47:17 Get A/D value=-858993460 result=40 12:47:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:47:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:47:17 Aux= 12:47:17 Message to Camera, serial 124276 queued 12:47:25 Received message from Master: op=Shutter serial=124286 12:47:25 Shutter LASER close 12:47:26 Received message from Master: op=PointingHead serial=124290 12:47:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:47:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:47:26 Point started: ret=0 12:47:26 point_skyscan result=0 12:47:27 Check angles 12:47:27 SkyScan query 12:47:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.89<-21526 Statuses=0008 0009 12:47:27 Msec=0 True Az=112.995 Ze=-142.89 Az status=0008 Ze status=0009 12:47:28 Check angles 12:47:28 SkyScan query 12:47:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.89<-20126 Statuses=0008 0009 12:47:28 Msec=750 True Az=112.995 Ze=-121.89 Az status=0008 Ze status=0009 12:47:28 Check angles 12:47:28 SkyScan query 12:47:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 12:47:29 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 12:47:29 Check angles 12:47:29 SkyScan query 12:47:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.995<-17333 Statuses=0008 0009 12:47:30 Msec=2250 True Az=112.995 Ze=-79.995 Az status=0008 Ze status=0009 12:47:30 Check angles 12:47:30 SkyScan query 12:47:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.04<-15936 Statuses=0008 0009 12:47:30 Msec=3000 True Az=112.995 Ze=-59.04 Az status=0008 Ze status=0009 12:47:31 Check angles 12:47:31 SkyScan query 12:47:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 12:47:31 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 12:47:31 Check angles 12:47:31 SkyScan query 12:47:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.07<-13138 Statuses=0008 0009 12:47:32 Msec=4500 True Az=112.995 Ze=-17.07 Az status=0008 Ze status=0009 12:47:32 Check angles 12:47:32 SkyScan query 12:47:33 SkyScan query done: ret=0 az=112.995<-7533 ze=3.885<-11741 Statuses=0008 0009 12:47:33 Msec=5250 True Az=112.995 Ze=3.885 Az status=0008 Ze status=0009 12:47:33 Check angles 12:47:33 SkyScan query 12:47:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:47:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:47:33 Message to Master queued w/err=0: serial=124290 error=0 12:47:38 Received message from Master: op=Filter serial=124291 12:47:38 Color wheel filter change from 0 to 0 12:47:38 FLIGetFilterPos err=0 currentPosition=0 12:47:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:47:38 Filter is already there-color wheel unchanged 12:47:39 Received message from Master: op=Shutter serial=124292 12:47:39 Shutter LASER close 12:47:39 Received message from Camera: op=State serial=124294 12:47:39 GetSingleValue result=40 Value=cccccccc 12:47:39 SkyScan query 12:47:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:47:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:39 Parameters OK 12:47:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:39 Set A/D data flow result=40 12:47:39 Set A/D channel type result=40 12:47:39 Set A/D encoding result=40 12:47:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:39 Set channel filter=0.000000e+000 result=40 12:47:39 Config A/D Result=40 12:47:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:39 Get A/D filter: -9.255963e+061 result=40 12:47:39 Get A/D value=-858993460 result=40 12:47:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:39 Parameters OK 12:47:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:39 Set A/D data flow result=40 12:47:39 Set A/D channel type result=40 12:47:39 Set A/D encoding result=40 12:47:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:39 Set channel filter=0.000000e+000 result=40 12:47:39 Config A/D Result=40 12:47:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:39 Get A/D filter: -9.255963e+061 result=40 12:47:39 Get A/D value=-858993460 result=40 12:47:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:47:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:47:39 Aux= 12:47:39 Message to Camera, serial 124294 queued 12:48:16 Received message from Master: op=PointingHead serial=124307 12:48:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:48:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:48:17 Point started: ret=0 12:48:17 point_skyscan result=0 12:48:17 Check angles 12:48:17 SkyScan query 12:48:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:48:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:48:18 Message to Master queued w/err=0: serial=124307 error=0 12:48:23 Received message from Master: op=Filter serial=124308 12:48:23 Color wheel filter change from 0 to 0 12:48:23 FLIGetFilterPos err=0 currentPosition=0 12:48:23 FLIGetStepsRemaining err=0 RemainingSteps=0 12:48:23 Filter is already there-color wheel unchanged 12:48:23 Received message from Master: op=Shutter serial=124309 12:48:23 Shutter LASER close 12:48:23 Received message from Camera: op=State serial=124311 12:48:23 GetSingleValue result=40 Value=cccccccc 12:48:23 SkyScan query 12:48:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:48:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:24 Parameters OK 12:48:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:24 Set A/D data flow result=40 12:48:24 Set A/D channel type result=40 12:48:24 Set A/D encoding result=40 12:48:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:24 Set channel filter=0.000000e+000 result=40 12:48:24 Config A/D Result=40 12:48:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:24 Get A/D filter: -9.255963e+061 result=40 12:48:24 Get A/D value=-858993460 result=40 12:48:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:24 Parameters OK 12:48:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:24 Set A/D data flow result=40 12:48:24 Set A/D channel type result=40 12:48:24 Set A/D encoding result=40 12:48:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:24 Set channel filter=0.000000e+000 result=40 12:48:24 Config A/D Result=40 12:48:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:24 Get A/D filter: -9.255963e+061 result=40 12:48:24 Get A/D value=-858993460 result=40 12:48:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:48:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:48:24 Aux= 12:48:24 Message to Camera, serial 124311 queued 12:49:01 Received message from Master: op=PointingHead serial=124324 12:49:01 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:49:01 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:49:01 Point started: ret=0 12:49:01 point_skyscan result=0 12:49:02 Check angles 12:49:02 SkyScan query 12:49:02 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 12:49:02 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 12:49:02 Check angles 12:49:02 SkyScan query 12:49:03 SkyScan query done: ret=0 az=153.51<-10234 ze=-6.51<-12434 Statuses=0009 0008 12:49:03 Msec=750 True Az=153.51 Ze=-6.51 Az status=0009 Ze status=0008 12:49:03 Check angles 12:49:03 SkyScan query 12:49:04 SkyScan query done: ret=0 az=171.36<-11424 ze=-6.495<-12433 Statuses=0009 0008 12:49:04 Msec=1500 True Az=171.36 Ze=-6.495 Az status=0009 Ze status=0008 12:49:04 Check angles 12:49:04 SkyScan query 12:49:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:49:04 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:49:04 Message to Master queued w/err=0: serial=124324 error=0 12:49:09 Received message from Master: op=Filter serial=124325 12:49:09 Color wheel filter change from 0 to 0 12:49:09 FLIGetFilterPos err=0 currentPosition=0 12:49:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:49:09 Filter is already there-color wheel unchanged 12:49:10 Received message from Master: op=Shutter serial=124326 12:49:10 Shutter LASER close 12:49:10 Received message from Camera: op=State serial=124328 12:49:10 GetSingleValue result=40 Value=cccccccc 12:49:10 SkyScan query 12:49:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:49:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:10 Parameters OK 12:49:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:10 Set A/D data flow result=40 12:49:10 Set A/D channel type result=40 12:49:10 Set A/D encoding result=40 12:49:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:10 Set channel filter=0.000000e+000 result=40 12:49:10 Config A/D Result=40 12:49:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:10 Get A/D filter: -9.255963e+061 result=40 12:49:10 Get A/D value=-858993460 result=40 12:49:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:10 Parameters OK 12:49:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:10 Set A/D data flow result=40 12:49:10 Set A/D channel type result=40 12:49:10 Set A/D encoding result=40 12:49:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:10 Set channel filter=0.000000e+000 result=40 12:49:10 Config A/D Result=40 12:49:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:10 Get A/D filter: -9.255963e+061 result=40 12:49:10 Get A/D value=-858993460 result=40 12:49:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:49:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:49:10 Aux= 12:49:10 Message to Camera, serial 124328 queued 12:49:47 Received message from Master: op=PointingHead serial=124341 12:49:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:49:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:49:47 Point started: ret=0 12:49:47 point_skyscan result=0 12:49:48 Check angles 12:49:48 SkyScan query 12:49:49 SkyScan query done: ret=0 az=153<-10200 ze=6.51<-11566 Statuses=0009 0008 12:49:49 Msec=0 True Az=153 Ze=6.51 Az status=0009 Ze status=0008 12:49:49 Check angles 12:49:49 SkyScan query 12:49:50 SkyScan query done: ret=0 az=135.495<-9033 ze=6.495<-11567 Statuses=0009 0008 12:49:50 Msec=750 True Az=135.495 Ze=6.495 Az status=0009 Ze status=0008 12:49:50 Check angles 12:49:50 SkyScan query 12:49:50 SkyScan query done: ret=0 az=117.66<-7844 ze=6.495<-11567 Statuses=0009 0008 12:49:50 Msec=1500 True Az=117.66 Ze=6.495 Az status=0009 Ze status=0008 12:49:50 Check angles 12:49:50 SkyScan query 12:49:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:49:51 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:49:51 Message to Master queued w/err=0: serial=124341 error=0 12:49:56 Received message from Master: op=Filter serial=124342 12:49:56 Color wheel filter change from 0 to 0 12:49:56 FLIGetFilterPos err=0 currentPosition=0 12:49:56 FLIGetStepsRemaining err=0 RemainingSteps=0 12:49:56 Filter is already there-color wheel unchanged 12:49:56 Received message from Master: op=Shutter serial=124343 12:49:56 Shutter LASER close 12:49:56 Received message from Camera: op=State serial=124345 12:49:56 GetSingleValue result=40 Value=cccccccc 12:49:56 SkyScan query 12:49:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:49:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:57 Parameters OK 12:49:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:57 Set A/D data flow result=40 12:49:57 Set A/D channel type result=40 12:49:57 Set A/D encoding result=40 12:49:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:57 Set channel filter=0.000000e+000 result=40 12:49:57 Config A/D Result=40 12:49:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:57 Get A/D filter: -9.255963e+061 result=40 12:49:57 Get A/D value=-858993460 result=40 12:49:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:57 Parameters OK 12:49:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:57 Set A/D data flow result=40 12:49:57 Set A/D channel type result=40 12:49:57 Set A/D encoding result=40 12:49:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:57 Set channel filter=0.000000e+000 result=40 12:49:57 Config A/D Result=40 12:49:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:57 Get A/D filter: -9.255963e+061 result=40 12:49:57 Get A/D value=-858993460 result=40 12:49:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:49:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:49:57 Aux= 12:49:57 Message to Camera, serial 124345 queued 12:50:34 Received message from Master: op=PointingHead serial=124358 12:50:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:50:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:50:34 Point started: ret=0 12:50:34 point_skyscan result=0 12:50:35 Check angles 12:50:35 SkyScan query 12:50:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 12:50:35 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 12:50:36 Check angles 12:50:36 SkyScan query 12:50:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 12:50:36 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 12:50:36 Check angles 12:50:36 SkyScan query 12:50:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.625<-16375 Statuses=0008 0009 12:50:37 Msec=1500 True Az=112.995 Ze=-65.625 Az status=0008 Ze status=0009 12:50:37 Check angles 12:50:37 SkyScan query 12:50:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 12:50:38 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 12:50:38 Check angles 12:50:38 SkyScan query 12:50:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.06<-19204 Statuses=0008 0009 12:50:38 Msec=3000 True Az=112.995 Ze=-108.06 Az status=0008 Ze status=0009 12:50:39 Check angles 12:50:39 SkyScan query 12:50:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.985<-20599 Statuses=0008 0009 12:50:39 Msec=3750 True Az=112.995 Ze=-128.985 Az status=0008 Ze status=0009 12:50:39 Check angles 12:50:39 SkyScan query 12:50:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.94<-21996 Statuses=0008 0009 12:50:40 Msec=4500 True Az=112.995 Ze=-149.94 Az status=0008 Ze status=0009 12:50:40 Check angles 12:50:40 SkyScan query 12:50:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.82<-23388 Statuses=0008 0009 12:50:41 Msec=5250 True Az=112.995 Ze=-170.82 Az status=0008 Ze status=0009 12:50:41 Check angles 12:50:41 SkyScan query 12:50:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:50:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:50:41 Message to Master queued w/err=0: serial=124358 error=0 12:50:46 Received message from Master: op=Filter serial=124359 12:50:46 Color wheel filter change from 0 to 0 12:50:46 FLIGetFilterPos err=0 currentPosition=0 12:50:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:50:46 Filter is already there-color wheel unchanged 12:50:47 Received message from Master: op=Shutter serial=124360 12:50:47 Shutter LASER open 12:50:47 Received message from Camera: op=State serial=124362 12:50:47 GetSingleValue result=40 Value=cccccccc 12:50:47 SkyScan query 12:50:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:50:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:47 Parameters OK 12:50:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:47 Set A/D data flow result=40 12:50:47 Set A/D channel type result=40 12:50:47 Set A/D encoding result=40 12:50:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:47 Set channel filter=0.000000e+000 result=40 12:50:47 Config A/D Result=40 12:50:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:47 Get A/D filter: -9.255963e+061 result=40 12:50:47 Get A/D value=-858993460 result=40 12:50:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:47 Parameters OK 12:50:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:47 Set A/D data flow result=40 12:50:47 Set A/D channel type result=40 12:50:47 Set A/D encoding result=40 12:50:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:47 Set channel filter=0.000000e+000 result=40 12:50:47 Config A/D Result=40 12:50:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:47 Get A/D filter: -9.255963e+061 result=40 12:50:47 Get A/D value=-858993460 result=40 12:50:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:50:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:50:47 Aux= 12:50:47 Message to Camera, serial 124362 queued 12:50:56 Received message from Master: op=Shutter serial=124372 12:50:56 Shutter LASER close 12:50:56 Received message from Master: op=PointingHead serial=124376 12:50:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:50:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:50:57 Point started: ret=0 12:50:57 point_skyscan result=0 12:50:57 Check angles 12:50:57 SkyScan query 12:50:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 12:50:58 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 12:50:58 Check angles 12:50:58 SkyScan query 12:50:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.535<-20169 Statuses=0008 0009 12:50:59 Msec=750 True Az=112.995 Ze=-122.535 Az status=0008 Ze status=0009 12:50:59 Check angles 12:50:59 SkyScan query 12:50:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.175<-18745 Statuses=0008 0009 12:50:59 Msec=1500 True Az=112.995 Ze=-101.175 Az status=0008 Ze status=0009 12:51:00 Check angles 12:51:00 SkyScan query 12:51:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.205<-17347 Statuses=0008 0009 12:51:00 Msec=2250 True Az=112.995 Ze=-80.205 Az status=0008 Ze status=0009 12:51:00 Check angles 12:51:00 SkyScan query 12:51:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 12:51:01 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 12:51:01 Check angles 12:51:01 SkyScan query 12:51:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.77<-14518 Statuses=0008 0009 12:51:02 Msec=3750 True Az=112.995 Ze=-37.77 Az status=0008 Ze status=0009 12:51:02 Check angles 12:51:02 SkyScan query 12:51:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.425<-13095 Statuses=0008 0009 12:51:02 Msec=4500 True Az=112.995 Ze=-16.425 Az status=0008 Ze status=0009 12:51:03 Check angles 12:51:03 SkyScan query 12:51:03 SkyScan query done: ret=0 az=113.01<-7534 ze=4.41<-11706 Statuses=0008 0009 12:51:03 Msec=5250 True Az=113.01 Ze=4.41 Az status=0008 Ze status=0009 12:51:03 Check angles 12:51:03 SkyScan query 12:51:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:51:04 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:51:04 Message to Master queued w/err=0: serial=124376 error=0 12:51:09 Received message from Master: op=Filter serial=124377 12:51:09 Color wheel filter change from 0 to 0 12:51:09 FLIGetFilterPos err=0 currentPosition=0 12:51:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:51:09 Filter is already there-color wheel unchanged 12:51:09 Received message from Master: op=Shutter serial=124378 12:51:09 Shutter LASER close 12:51:09 Received message from Camera: op=State serial=124380 12:51:09 GetSingleValue result=40 Value=cccccccc 12:51:09 SkyScan query 12:51:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:51:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:10 Parameters OK 12:51:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:10 Set A/D data flow result=40 12:51:10 Set A/D channel type result=40 12:51:10 Set A/D encoding result=40 12:51:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:10 Set channel filter=0.000000e+000 result=40 12:51:10 Config A/D Result=40 12:51:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:10 Get A/D filter: -9.255963e+061 result=40 12:51:10 Get A/D value=-858993460 result=40 12:51:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:10 Parameters OK 12:51:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:10 Set A/D data flow result=40 12:51:10 Set A/D channel type result=40 12:51:10 Set A/D encoding result=40 12:51:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:10 Set channel filter=0.000000e+000 result=40 12:51:10 Config A/D Result=40 12:51:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:10 Get A/D filter: -9.255963e+061 result=40 12:51:10 Get A/D value=-858993460 result=40 12:51:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:51:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:51:10 Aux= 12:51:10 Message to Camera, serial 124380 queued 12:51:47 Received message from Master: op=PointingHead serial=124393 12:51:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:51:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:51:47 Point started: ret=0 12:51:47 point_skyscan result=0 12:51:48 Check angles 12:51:48 SkyScan query 12:51:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:51:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:51:48 Message to Master queued w/err=0: serial=124393 error=0 12:51:53 Received message from Master: op=Filter serial=124394 12:51:53 Color wheel filter change from 0 to 0 12:51:53 FLIGetFilterPos err=0 currentPosition=0 12:51:53 FLIGetStepsRemaining err=0 RemainingSteps=0 12:51:53 Filter is already there-color wheel unchanged 12:51:54 Received message from Master: op=Shutter serial=124395 12:51:54 Shutter LASER close 12:51:54 Received message from Camera: op=State serial=124397 12:51:54 GetSingleValue result=40 Value=cccccccc 12:51:54 SkyScan query 12:51:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:51:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:54 Parameters OK 12:51:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:54 Set A/D data flow result=40 12:51:54 Set A/D channel type result=40 12:51:54 Set A/D encoding result=40 12:51:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:54 Set channel filter=0.000000e+000 result=40 12:51:54 Config A/D Result=40 12:51:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:54 Get A/D filter: -9.255963e+061 result=40 12:51:54 Get A/D value=-858993460 result=40 12:51:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:54 Parameters OK 12:51:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:54 Set A/D data flow result=40 12:51:54 Set A/D channel type result=40 12:51:54 Set A/D encoding result=40 12:51:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:54 Set channel filter=0.000000e+000 result=40 12:51:54 Config A/D Result=40 12:51:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:54 Get A/D filter: -9.255963e+061 result=40 12:51:54 Get A/D value=-858993460 result=40 12:51:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:51:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:51:54 Aux= 12:51:54 Message to Camera, serial 124397 queued 12:52:31 Received message from Master: op=PointingHead serial=124410 12:52:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:52:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:52:31 Point started: ret=0 12:52:31 point_skyscan result=0 12:52:32 Check angles 12:52:32 SkyScan query 12:52:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:52:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:52:33 Message to Master queued w/err=0: serial=124410 error=0 12:52:38 Received message from Master: op=Filter serial=124411 12:52:38 Color wheel filter change from 0 to 0 12:52:38 FLIGetFilterPos err=0 currentPosition=0 12:52:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:52:38 Filter is already there-color wheel unchanged 12:52:38 Received message from Master: op=Shutter serial=124412 12:52:38 Shutter LASER close 12:52:38 Received message from Camera: op=State serial=124414 12:52:38 GetSingleValue result=40 Value=cccccccc 12:52:38 SkyScan query 12:52:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:52:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:38 Parameters OK 12:52:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:38 Set A/D data flow result=40 12:52:38 Set A/D channel type result=40 12:52:38 Set A/D encoding result=40 12:52:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:38 Set channel filter=0.000000e+000 result=40 12:52:38 Config A/D Result=40 12:52:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:38 Get A/D filter: -9.255963e+061 result=40 12:52:38 Get A/D value=-858993460 result=40 12:52:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:38 Parameters OK 12:52:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:38 Set A/D data flow result=40 12:52:38 Set A/D channel type result=40 12:52:38 Set A/D encoding result=40 12:52:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:38 Set channel filter=0.000000e+000 result=40 12:52:38 Config A/D Result=40 12:52:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:38 Get A/D filter: -9.255963e+061 result=40 12:52:38 Get A/D value=-858993460 result=40 12:52:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:52:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:52:38 Aux= 12:52:38 Message to Camera, serial 124414 queued 12:53:15 Received message from Master: op=PointingHead serial=124427 12:53:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:53:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:53:16 Point started: ret=0 12:53:16 point_skyscan result=0 12:53:17 Check angles 12:53:17 SkyScan query 12:53:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:53:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:53:17 Message to Master queued w/err=0: serial=124427 error=0 12:53:22 Received message from Master: op=Filter serial=124428 12:53:22 Color wheel filter change from 0 to 0 12:53:22 FLIGetFilterPos err=0 currentPosition=0 12:53:22 FLIGetStepsRemaining err=0 RemainingSteps=0 12:53:22 Filter is already there-color wheel unchanged 12:53:22 Received message from Master: op=Shutter serial=124429 12:53:22 Shutter LASER close 12:53:22 Received message from Camera: op=State serial=124431 12:53:22 GetSingleValue result=40 Value=cccccccc 12:53:22 SkyScan query 12:53:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:53:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:23 Parameters OK 12:53:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:23 Set A/D data flow result=40 12:53:23 Set A/D channel type result=40 12:53:23 Set A/D encoding result=40 12:53:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:23 Set channel filter=0.000000e+000 result=40 12:53:23 Config A/D Result=40 12:53:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:23 Get A/D filter: -9.255963e+061 result=40 12:53:23 Get A/D value=-858993460 result=40 12:53:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:23 Parameters OK 12:53:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:23 Set A/D data flow result=40 12:53:23 Set A/D channel type result=40 12:53:23 Set A/D encoding result=40 12:53:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:23 Set channel filter=0.000000e+000 result=40 12:53:23 Config A/D Result=40 12:53:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:23 Get A/D filter: -9.255963e+061 result=40 12:53:23 Get A/D value=-858993460 result=40 12:53:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:53:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:53:23 Aux= 12:53:23 Message to Camera, serial 124431 queued 12:54:00 Received message from Master: op=PointingHead serial=124444 12:54:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:54:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:54:00 Point started: ret=0 12:54:00 point_skyscan result=0 12:54:01 Check angles 12:54:01 SkyScan query 12:54:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 12:54:01 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 12:54:02 Check angles 12:54:02 SkyScan query 12:54:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.115<-14941 Statuses=0008 0009 12:54:02 Msec=750 True Az=112.995 Ze=-44.115 Az status=0008 Ze status=0009 12:54:02 Check angles 12:54:02 SkyScan query 12:54:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.055<-16337 Statuses=0008 0009 12:54:03 Msec=1500 True Az=112.995 Ze=-65.055 Az status=0008 Ze status=0009 12:54:03 Check angles 12:54:03 SkyScan query 12:54:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.98<-17732 Statuses=0008 0009 12:54:04 Msec=2250 True Az=112.995 Ze=-85.98 Az status=0008 Ze status=0009 12:54:04 Check angles 12:54:04 SkyScan query 12:54:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.905<-19127 Statuses=0008 0009 12:54:04 Msec=3000 True Az=112.995 Ze=-106.905 Az status=0008 Ze status=0009 12:54:05 Check angles 12:54:05 SkyScan query 12:54:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.875<-20525 Statuses=0008 0009 12:54:05 Msec=3750 True Az=112.995 Ze=-127.875 Az status=0008 Ze status=0009 12:54:05 Check angles 12:54:05 SkyScan query 12:54:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.815<-21921 Statuses=0008 0009 12:54:06 Msec=4500 True Az=112.995 Ze=-148.815 Az status=0008 Ze status=0009 12:54:06 Check angles 12:54:06 SkyScan query 12:54:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.755<-23317 Statuses=0008 0009 12:54:07 Msec=5250 True Az=112.995 Ze=-169.755 Az status=0008 Ze status=0009 12:54:07 Check angles 12:54:07 SkyScan query 12:54:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:54:07 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:54:07 Message to Master queued w/err=0: serial=124444 error=0 12:54:12 Received message from Master: op=Filter serial=124445 12:54:12 Color wheel filter change from 0 to 0 12:54:12 FLIGetFilterPos err=0 currentPosition=0 12:54:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:54:12 Filter is already there-color wheel unchanged 12:54:13 Received message from Master: op=Shutter serial=124446 12:54:13 Shutter LASER open 12:54:13 Received message from Camera: op=State serial=124448 12:54:13 GetSingleValue result=40 Value=cccccccc 12:54:13 SkyScan query 12:54:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:54:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 [UTC 2019-3-5 12:54:13] 12:54:13 Parameters OK 12:54:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:13 Set A/D data flow result=40 12:54:13 Set A/D channel type result=40 12:54:13 Set A/D encoding result=40 12:54:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:13 Set channel filter=0.000000e+000 result=40 12:54:13 Config A/D Result=40 12:54:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:13 Get A/D filter: -9.255963e+061 result=40 12:54:13 Get A/D value=-858993460 result=40 12:54:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:13 Parameters OK 12:54:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:13 Set A/D data flow result=40 12:54:13 Set A/D channel type result=40 12:54:13 Set A/D encoding result=40 12:54:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:13 Set channel filter=0.000000e+000 result=40 12:54:13 Config A/D Result=40 12:54:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:13 Get A/D filter: -9.255963e+061 result=40 12:54:13 Get A/D value=-858993460 result=40 12:54:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:54:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:54:13 Aux= 12:54:13 Message to Camera, serial 124448 queued 12:54:22 Received message from Master: op=Shutter serial=124458 12:54:22 Shutter LASER close 12:54:22 Received message from Master: op=PointingHead serial=124462 12:54:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:54:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:54:23 Point started: ret=0 12:54:23 point_skyscan result=0 12:54:23 Check angles 12:54:23 SkyScan query 12:54:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.77<-21518 Statuses=0008 0009 12:54:24 Msec=0 True Az=112.995 Ze=-142.77 Az status=0008 Ze status=0009 12:54:24 Check angles 12:54:24 SkyScan query 12:54:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.68<-20112 Statuses=0008 0009 12:54:25 Msec=750 True Az=112.995 Ze=-121.68 Az status=0008 Ze status=0009 12:54:25 Check angles 12:54:25 SkyScan query 12:54:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.83<-18722 Statuses=0008 0009 12:54:25 Msec=1500 True Az=112.995 Ze=-100.83 Az status=0008 Ze status=0009 12:54:26 Check angles 12:54:26 SkyScan query 12:54:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.875<-17325 Statuses=0008 0009 12:54:26 Msec=2250 True Az=112.995 Ze=-79.875 Az status=0008 Ze status=0009 12:54:26 Check angles 12:54:26 SkyScan query 12:54:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.92<-15928 Statuses=0008 0009 12:54:27 Msec=3000 True Az=112.995 Ze=-58.92 Az status=0008 Ze status=0009 12:54:27 Check angles 12:54:27 SkyScan query 12:54:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.905<-14527 Statuses=0008 0009 12:54:28 Msec=3750 True Az=112.995 Ze=-37.905 Az status=0008 Ze status=0009 12:54:28 Check angles 12:54:28 SkyScan query 12:54:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.95<-13130 Statuses=0008 0009 12:54:28 Msec=4500 True Az=112.995 Ze=-16.95 Az status=0008 Ze status=0009 12:54:29 Check angles 12:54:29 SkyScan query 12:54:29 SkyScan query done: ret=0 az=112.995<-7533 ze=3.99<-11734 Statuses=0008 0009 12:54:29 Msec=5250 True Az=112.995 Ze=3.99 Az status=0008 Ze status=0009 12:54:29 Check angles 12:54:29 SkyScan query 12:54:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:54:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:54:30 Message to Master queued w/err=0: serial=124462 error=0 12:54:35 Received message from Master: op=Filter serial=124463 12:54:35 Color wheel filter change from 0 to 0 12:54:35 FLIGetFilterPos err=0 currentPosition=0 12:54:35 FLIGetStepsRemaining err=0 RemainingSteps=0 12:54:35 Filter is already there-color wheel unchanged 12:54:35 Received message from Master: op=Shutter serial=124464 12:54:35 Shutter LASER close 12:54:35 Received message from Camera: op=State serial=124466 12:54:35 GetSingleValue result=40 Value=cccccccc 12:54:35 SkyScan query 12:54:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:54:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:36 Parameters OK 12:54:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:36 Set A/D data flow result=40 12:54:36 Set A/D channel type result=40 12:54:36 Set A/D encoding result=40 12:54:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:36 Set channel filter=0.000000e+000 result=40 12:54:36 Config A/D Result=40 12:54:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:36 Get A/D filter: -9.255963e+061 result=40 12:54:36 Get A/D value=-858993460 result=40 12:54:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:36 Parameters OK 12:54:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:36 Set A/D data flow result=40 12:54:36 Set A/D channel type result=40 12:54:36 Set A/D encoding result=40 12:54:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:36 Set channel filter=0.000000e+000 result=40 12:54:36 Config A/D Result=40 12:54:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:36 Get A/D filter: -9.255963e+061 result=40 12:54:36 Get A/D value=-858993460 result=40 12:54:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:54:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:54:36 Aux= 12:54:36 Message to Camera, serial 124466 queued 12:55:13 Received message from Master: op=PointingHead serial=124479 12:55:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:55:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:55:13 Point started: ret=0 12:55:13 point_skyscan result=0 12:55:14 Check angles 12:55:14 SkyScan query 12:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:55:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:55:14 Message to Master queued w/err=0: serial=124479 error=0 12:55:19 Received message from Master: op=Filter serial=124480 12:55:19 Color wheel filter change from 0 to 0 12:55:19 FLIGetFilterPos err=0 currentPosition=0 12:55:19 FLIGetStepsRemaining err=0 RemainingSteps=0 12:55:19 Filter is already there-color wheel unchanged 12:55:20 Received message from Master: op=Shutter serial=124481 12:55:20 Shutter LASER close 12:55:20 Received message from Camera: op=State serial=124483 12:55:20 GetSingleValue result=40 Value=cccccccc 12:55:20 SkyScan query 12:55:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:55:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:20 Parameters OK 12:55:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:20 Set A/D data flow result=40 12:55:20 Set A/D channel type result=40 12:55:20 Set A/D encoding result=40 12:55:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:20 Set channel filter=0.000000e+000 result=40 12:55:20 Config A/D Result=40 12:55:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:20 Get A/D filter: -9.255963e+061 result=40 12:55:20 Get A/D value=-858993460 result=40 12:55:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:20 Parameters OK 12:55:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:20 Set A/D data flow result=40 12:55:20 Set A/D channel type result=40 12:55:20 Set A/D encoding result=40 12:55:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:20 Set channel filter=0.000000e+000 result=40 12:55:20 Config A/D Result=40 12:55:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:20 Get A/D filter: -9.255963e+061 result=40 12:55:20 Get A/D value=-858993460 result=40 12:55:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:55:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:55:20 Aux= 12:55:20 Message to Camera, serial 124483 queued 12:55:57 Received message from Master: op=PointingHead serial=124496 12:55:57 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:55:57 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:55:57 Point started: ret=0 12:55:57 point_skyscan result=0 12:55:58 Check angles 12:55:58 SkyScan query 12:55:59 SkyScan query done: ret=0 az=136.47<-9098 ze=-6.51<-12434 Statuses=0009 0008 12:55:59 Msec=0 True Az=136.47 Ze=-6.51 Az status=0009 Ze status=0008 12:55:59 Check angles 12:55:59 SkyScan query 12:55:59 SkyScan query done: ret=0 az=153.945<-10263 ze=-6.51<-12434 Statuses=0009 0008 12:55:59 Msec=750 True Az=153.945 Ze=-6.51 Az status=0009 Ze status=0008 12:56:00 Check angles 12:56:00 SkyScan query 12:56:00 SkyScan query done: ret=0 az=171.645<-11443 ze=-6.495<-12433 Statuses=0009 0008 12:56:00 Msec=1500 True Az=171.645 Ze=-6.495 Az status=0009 Ze status=0008 12:56:00 Check angles 12:56:00 SkyScan query 12:56:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:56:01 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:56:01 Message to Master queued w/err=0: serial=124496 error=0 12:56:06 Received message from Master: op=Filter serial=124497 12:56:06 Color wheel filter change from 0 to 0 12:56:06 FLIGetFilterPos err=0 currentPosition=0 12:56:06 FLIGetStepsRemaining err=0 RemainingSteps=0 12:56:06 Filter is already there-color wheel unchanged 12:56:06 Received message from Master: op=Shutter serial=124498 12:56:06 Shutter LASER close 12:56:06 Received message from Camera: op=State serial=124500 12:56:06 GetSingleValue result=40 Value=cccccccc 12:56:06 SkyScan query 12:56:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:56:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:07 Parameters OK 12:56:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:07 Set A/D data flow result=40 12:56:07 Set A/D channel type result=40 12:56:07 Set A/D encoding result=40 12:56:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:07 Set channel filter=0.000000e+000 result=40 12:56:07 Config A/D Result=40 12:56:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:07 Get A/D filter: -9.255963e+061 result=40 12:56:07 Get A/D value=-858993460 result=40 12:56:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:07 Parameters OK 12:56:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:07 Set A/D data flow result=40 12:56:07 Set A/D channel type result=40 12:56:07 Set A/D encoding result=40 12:56:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:07 Set channel filter=0.000000e+000 result=40 12:56:07 Config A/D Result=40 12:56:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:07 Get A/D filter: -9.255963e+061 result=40 12:56:07 Get A/D value=-858993460 result=40 12:56:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:56:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:56:07 Aux= 12:56:07 Message to Camera, serial 124500 queued 12:56:44 Received message from Master: op=PointingHead serial=124513 12:56:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:56:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:56:44 Point started: ret=0 12:56:44 point_skyscan result=0 12:56:45 Check angles 12:56:45 SkyScan query 12:56:45 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 12:56:45 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 12:56:45 Check angles 12:56:45 SkyScan query 12:56:46 SkyScan query done: ret=0 az=135.36<-9024 ze=6.495<-11567 Statuses=0009 0008 12:56:46 Msec=750 True Az=135.36 Ze=6.495 Az status=0009 Ze status=0008 12:56:46 Check angles 12:56:46 SkyScan query 12:56:47 SkyScan query done: ret=0 az=117.9<-7860 ze=6.495<-11567 Statuses=0009 0008 12:56:47 Msec=1500 True Az=117.9 Ze=6.495 Az status=0009 Ze status=0008 12:56:47 Check angles 12:56:47 SkyScan query 12:56:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:56:48 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:56:48 Message to Master queued w/err=0: serial=124513 error=0 12:56:53 Received message from Master: op=Filter serial=124514 12:56:53 Color wheel filter change from 0 to 0 12:56:53 FLIGetFilterPos err=0 currentPosition=0 12:56:53 FLIGetStepsRemaining err=0 RemainingSteps=0 12:56:53 Filter is already there-color wheel unchanged 12:56:53 Received message from Master: op=Shutter serial=124515 12:56:53 Shutter LASER close 12:56:53 Received message from Camera: op=State serial=124517 12:56:53 GetSingleValue result=40 Value=cccccccc 12:56:53 SkyScan query 12:56:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:56:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:53 Parameters OK 12:56:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:53 Set A/D data flow result=40 12:56:53 Set A/D channel type result=40 12:56:53 Set A/D encoding result=40 12:56:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:53 Set channel filter=0.000000e+000 result=40 12:56:53 Config A/D Result=40 12:56:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:53 Get A/D filter: -9.255963e+061 result=40 12:56:53 Get A/D value=-858993460 result=40 12:56:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:53 Parameters OK 12:56:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:53 Set A/D data flow result=40 12:56:53 Set A/D channel type result=40 12:56:53 Set A/D encoding result=40 12:56:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:53 Set channel filter=0.000000e+000 result=40 12:56:53 Config A/D Result=40 12:56:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:53 Get A/D filter: -9.255963e+061 result=40 12:56:53 Get A/D value=-858993460 result=40 12:56:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:56:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:56:53 Aux= 12:56:53 Message to Camera, serial 124517 queued 12:57:30 Received message from Master: op=PointingHead serial=124530 12:57:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:57:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:57:30 Point started: ret=0 12:57:30 point_skyscan result=0 12:57:31 Check angles 12:57:31 SkyScan query 12:57:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 12:57:32 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 12:57:32 Check angles 12:57:32 SkyScan query 12:57:33 SkyScan query done: ret=0 az=112.98<-7532 ze=-44.205<-14947 Statuses=0008 0009 12:57:33 Msec=750 True Az=112.98 Ze=-44.205 Az status=0008 Ze status=0009 12:57:33 Check angles 12:57:33 SkyScan query 12:57:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.115<-16341 Statuses=0008 0009 12:57:33 Msec=1500 True Az=112.995 Ze=-65.115 Az status=0008 Ze status=0009 12:57:33 Check angles 12:57:33 SkyScan query 12:57:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.055<-17737 Statuses=0008 0009 12:57:34 Msec=2250 True Az=112.995 Ze=-86.055 Az status=0008 Ze status=0009 12:57:34 Check angles 12:57:34 SkyScan query 12:57:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.98<-19132 Statuses=0008 0009 12:57:35 Msec=3000 True Az=112.995 Ze=-106.98 Az status=0008 Ze status=0009 12:57:35 Check angles 12:57:35 SkyScan query 12:57:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.965<-20531 Statuses=0008 0009 12:57:36 Msec=3750 True Az=112.995 Ze=-127.965 Az status=0008 Ze status=0009 12:57:36 Check angles 12:57:36 SkyScan query 12:57:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.92<-21928 Statuses=0008 0009 12:57:36 Msec=4500 True Az=112.995 Ze=-148.92 Az status=0008 Ze status=0009 12:57:36 Check angles 12:57:36 SkyScan query 12:57:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.875<-23325 Statuses=0008 0009 12:57:37 Msec=5250 True Az=112.995 Ze=-169.875 Az status=0008 Ze status=0009 12:57:37 Check angles 12:57:37 SkyScan query 12:57:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:57:38 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:57:38 Message to Master queued w/err=0: serial=124530 error=0 12:57:43 Received message from Master: op=Filter serial=124531 12:57:43 Color wheel filter change from 0 to 0 12:57:43 FLIGetFilterPos err=0 currentPosition=0 12:57:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:57:43 Filter is already there-color wheel unchanged 12:57:43 Received message from Master: op=Shutter serial=124532 12:57:43 Shutter LASER open 12:57:43 Received message from Camera: op=State serial=124534 12:57:43 GetSingleValue result=40 Value=cccccccc 12:57:43 SkyScan query 12:57:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:57:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:44 Parameters OK 12:57:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:44 Set A/D data flow result=40 12:57:44 Set A/D channel type result=40 12:57:44 Set A/D encoding result=40 12:57:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:44 Set channel filter=0.000000e+000 result=40 12:57:44 Config A/D Result=40 12:57:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:44 Get A/D filter: -9.255963e+061 result=40 12:57:44 Get A/D value=-858993460 result=40 12:57:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:44 Parameters OK 12:57:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:44 Set A/D data flow result=40 12:57:44 Set A/D channel type result=40 12:57:44 Set A/D encoding result=40 12:57:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:44 Set channel filter=0.000000e+000 result=40 12:57:44 Config A/D Result=40 12:57:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:44 Get A/D filter: -9.255963e+061 result=40 12:57:44 Get A/D value=-858993460 result=40 12:57:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:57:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:57:44 Aux= 12:57:44 Message to Camera, serial 124534 queued 12:57:51 Received message from Master: op=Shutter serial=124543 12:57:51 Shutter LASER close 12:57:52 Received message from Master: op=PointingHead serial=124547 12:57:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:57:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:57:52 Point started: ret=0 12:57:52 point_skyscan result=0 12:57:53 Check angles 12:57:53 SkyScan query 12:57:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 12:57:53 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 12:57:54 Check angles 12:57:54 SkyScan query 12:57:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.505<-20167 Statuses=0008 0009 12:57:54 Msec=750 True Az=112.995 Ze=-122.505 Az status=0008 Ze status=0009 12:57:54 Check angles 12:57:54 SkyScan query 12:57:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.55<-18770 Statuses=0008 0009 12:57:55 Msec=1500 True Az=112.995 Ze=-101.55 Az status=0008 Ze status=0009 12:57:55 Check angles 12:57:55 SkyScan query 12:57:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.16<-17344 Statuses=0008 0009 12:57:56 Msec=2250 True Az=112.995 Ze=-80.16 Az status=0008 Ze status=0009 12:57:56 Check angles 12:57:56 SkyScan query 12:57:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 12:57:56 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 12:57:57 Check angles 12:57:57 SkyScan query 12:57:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.175<-14545 Statuses=0008 0009 12:57:57 Msec=3750 True Az=112.995 Ze=-38.175 Az status=0008 Ze status=0009 12:57:57 Check angles 12:57:57 SkyScan query 12:57:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.25<-13150 Statuses=0008 0009 12:57:58 Msec=4500 True Az=112.995 Ze=-17.25 Az status=0008 Ze status=0009 12:57:58 Check angles 12:57:58 SkyScan query 12:57:59 SkyScan query done: ret=0 az=113.01<-7534 ze=4.125<-11725 Statuses=0008 0009 12:57:59 Msec=5250 True Az=113.01 Ze=4.125 Az status=0008 Ze status=0009 12:57:59 Check angles 12:57:59 SkyScan query 12:57:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:57:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:57:59 Message to Master queued w/err=0: serial=124547 error=0 12:58:04 Received message from Master: op=Filter serial=124548 12:58:04 Color wheel filter change from 0 to 0 12:58:04 FLIGetFilterPos err=0 currentPosition=0 12:58:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:04 Filter is already there-color wheel unchanged 12:58:05 Received message from Master: op=Shutter serial=124549 12:58:05 Shutter LASER close 12:58:05 Received message from Camera: op=State serial=124551 12:58:05 GetSingleValue result=40 Value=cccccccc 12:58:05 SkyScan query 12:58:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:58:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:05 Parameters OK 12:58:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:05 Set A/D data flow result=40 12:58:05 Set A/D channel type result=40 12:58:05 Set A/D encoding result=40 12:58:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:05 Set channel filter=0.000000e+000 result=40 12:58:05 Config A/D Result=40 12:58:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:05 Get A/D filter: -9.255963e+061 result=40 12:58:05 Get A/D value=-858993460 result=40 12:58:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:05 Parameters OK 12:58:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:05 Set A/D data flow result=40 12:58:05 Set A/D channel type result=40 12:58:05 Set A/D encoding result=40 12:58:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:05 Set channel filter=0.000000e+000 result=40 12:58:05 Config A/D Result=40 12:58:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:05 Get A/D filter: -9.255963e+061 result=40 12:58:05 Get A/D value=-858993460 result=40 12:58:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:58:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:58:05 Aux= 12:58:05 Message to Camera, serial 124551 queued 12:58:42 Received message from Master: op=PointingHead serial=124564 12:58:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:58:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:58:42 Point started: ret=0 12:58:42 point_skyscan result=0 12:58:43 Check angles 12:58:43 SkyScan query 12:58:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:58:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:58:44 Message to Master queued w/err=0: serial=124564 error=0 12:58:49 Received message from Master: op=Filter serial=124565 12:58:49 Color wheel filter change from 0 to 0 12:58:49 FLIGetFilterPos err=0 currentPosition=0 12:58:49 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:49 Filter is already there-color wheel unchanged 12:58:49 Received message from Master: op=Shutter serial=124566 12:58:49 Shutter LASER close 12:58:49 Received message from Camera: op=State serial=124568 12:58:49 GetSingleValue result=40 Value=cccccccc 12:58:49 SkyScan query 12:58:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:58:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:50 Parameters OK 12:58:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:50 Set A/D data flow result=40 12:58:50 Set A/D channel type result=40 12:58:50 Set A/D encoding result=40 12:58:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:50 Set channel filter=0.000000e+000 result=40 12:58:50 Config A/D Result=40 12:58:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:50 Get A/D filter: -9.255963e+061 result=40 12:58:50 Get A/D value=-858993460 result=40 12:58:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:50 Parameters OK 12:58:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:50 Set A/D data flow result=40 12:58:50 Set A/D channel type result=40 12:58:50 Set A/D encoding result=40 12:58:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:50 Set channel filter=0.000000e+000 result=40 12:58:50 Config A/D Result=40 12:58:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:50 Get A/D filter: -9.255963e+061 result=40 12:58:50 Get A/D value=-858993460 result=40 12:58:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:58:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:58:50 Aux= 12:58:50 Message to Camera, serial 124568 queued 12:59:26 Received message from Master: op=PointingHead serial=124581 12:59:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:59:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:59:27 Point started: ret=0 12:59:27 point_skyscan result=0 12:59:28 Check angles 12:59:28 SkyScan query 12:59:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:59:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:59:28 Message to Master queued w/err=0: serial=124581 error=0 12:59:33 Received message from Master: op=Filter serial=124582 12:59:33 Color wheel filter change from 0 to 0 12:59:33 FLIGetFilterPos err=0 currentPosition=0 12:59:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:59:33 Filter is already there-color wheel unchanged 12:59:33 Received message from Master: op=Shutter serial=124583 12:59:33 Shutter LASER close 12:59:33 Received message from Camera: op=State serial=124585 12:59:33 GetSingleValue result=40 Value=cccccccc 12:59:33 SkyScan query 12:59:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:59:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:34 Parameters OK 12:59:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:34 Set A/D data flow result=40 12:59:34 Set A/D channel type result=40 12:59:34 Set A/D encoding result=40 12:59:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:34 Set channel filter=0.000000e+000 result=40 12:59:34 Config A/D Result=40 12:59:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:34 Get A/D filter: -9.255963e+061 result=40 12:59:34 Get A/D value=-858993460 result=40 12:59:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:34 Parameters OK 12:59:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:34 Set A/D data flow result=40 12:59:34 Set A/D channel type result=40 12:59:34 Set A/D encoding result=40 12:59:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:34 Set channel filter=0.000000e+000 result=40 12:59:34 Config A/D Result=40 12:59:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:34 Get A/D filter: -9.255963e+061 result=40 12:59:34 Get A/D value=-858993460 result=40 12:59:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:34 Aux= 12:59:34 Message to Camera, serial 124585 queued 13:00:11 Received message from Master: op=PointingHead serial=124598 13:00:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:00:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:00:11 Point started: ret=0 13:00:11 point_skyscan result=0 13:00:12 Check angles 13:00:12 SkyScan query 13:00:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:00:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:00:12 Message to Master queued w/err=0: serial=124598 error=0 13:00:17 Received message from Master: op=Filter serial=124599 13:00:17 Color wheel filter change from 0 to 0 13:00:17 FLIGetFilterPos err=0 currentPosition=0 13:00:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:00:17 Filter is already there-color wheel unchanged 13:00:18 Received message from Master: op=Shutter serial=124600 13:00:18 Shutter LASER close 13:00:18 Received message from Camera: op=State serial=124602 13:00:18 GetSingleValue result=40 Value=cccccccc 13:00:18 SkyScan query 13:00:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:00:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:18 Parameters OK 13:00:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:18 Set A/D data flow result=40 13:00:18 Set A/D channel type result=40 13:00:18 Set A/D encoding result=40 13:00:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:18 Set channel filter=0.000000e+000 result=40 13:00:18 Config A/D Result=40 13:00:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:18 Get A/D filter: -9.255963e+061 result=40 13:00:18 Get A/D value=-858993460 result=40 13:00:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:18 Parameters OK 13:00:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:18 Set A/D data flow result=40 13:00:18 Set A/D channel type result=40 13:00:18 Set A/D encoding result=40 13:00:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:18 Set channel filter=0.000000e+000 result=40 13:00:18 Config A/D Result=40 13:00:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:18 Get A/D filter: -9.255963e+061 result=40 13:00:18 Get A/D value=-858993460 result=40 13:00:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:00:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:00:18 Aux= 13:00:18 Message to Camera, serial 124602 queued 13:00:55 Received message from Master: op=PointingHead serial=124615 13:00:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:00:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:00:55 Point started: ret=0 13:00:55 point_skyscan result=0 13:00:56 Check angles 13:00:56 SkyScan query 13:00:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 13:00:57 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 13:00:57 Check angles 13:00:57 SkyScan query 13:00:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.115<-14941 Statuses=0008 0009 13:00:57 Msec=750 True Az=112.995 Ze=-44.115 Az status=0008 Ze status=0009 13:00:58 Check angles 13:00:58 SkyScan query 13:00:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.04<-16336 Statuses=0008 0009 13:00:58 Msec=1500 True Az=112.995 Ze=-65.04 Az status=0008 Ze status=0009 13:00:58 Check angles 13:00:58 SkyScan query 13:00:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.965<-17731 Statuses=0008 0009 13:00:59 Msec=2250 True Az=112.995 Ze=-85.965 Az status=0008 Ze status=0009 13:00:59 Check angles 13:00:59 SkyScan query 13:01:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.905<-19127 Statuses=0008 0009 13:01:00 Msec=3000 True Az=112.995 Ze=-106.905 Az status=0008 Ze status=0009 13:01:00 Check angles 13:01:00 SkyScan query 13:01:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.86<-20524 Statuses=0008 0009 13:01:00 Msec=3750 True Az=112.995 Ze=-127.86 Az status=0008 Ze status=0009 13:01:01 Check angles 13:01:01 SkyScan query 13:01:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.8<-21920 Statuses=0008 0009 13:01:01 Msec=4500 True Az=112.995 Ze=-148.8 Az status=0008 Ze status=0009 13:01:01 Check angles 13:01:01 SkyScan query 13:01:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.725<-23315 Statuses=0008 0009 13:01:02 Msec=5250 True Az=112.995 Ze=-169.725 Az status=0008 Ze status=0009 13:01:02 Check angles 13:01:02 SkyScan query 13:01:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:01:03 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:01:03 Message to Master queued w/err=0: serial=124615 error=0 13:01:08 Received message from Master: op=Filter serial=124616 13:01:08 Color wheel filter change from 0 to 0 13:01:08 FLIGetFilterPos err=0 currentPosition=0 13:01:08 FLIGetStepsRemaining err=0 RemainingSteps=0 13:01:08 Filter is already there-color wheel unchanged 13:01:08 Received message from Master: op=Shutter serial=124617 13:01:08 Shutter LASER open 13:01:08 Received message from Camera: op=State serial=124619 13:01:08 GetSingleValue result=40 Value=cccccccc 13:01:08 SkyScan query 13:01:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:01:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:09 Parameters OK 13:01:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:09 Set A/D data flow result=40 13:01:09 Set A/D channel type result=40 13:01:09 Set A/D encoding result=40 13:01:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:09 Set channel filter=0.000000e+000 result=40 13:01:09 Config A/D Result=40 13:01:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:09 Get A/D filter: -9.255963e+061 result=40 13:01:09 Get A/D value=-858993460 result=40 13:01:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:09 Parameters OK 13:01:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:09 Set A/D data flow result=40 13:01:09 Set A/D channel type result=40 13:01:09 Set A/D encoding result=40 13:01:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:09 Set channel filter=0.000000e+000 result=40 13:01:09 Config A/D Result=40 13:01:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:09 Get A/D filter: -9.255963e+061 result=40 13:01:09 Get A/D value=-858993460 result=40 13:01:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:01:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:01:09 Aux= 13:01:09 Message to Camera, serial 124619 queued 13:01:17 Received message from Master: op=Shutter serial=124629 13:01:17 Shutter LASER close 13:01:18 Received message from Master: op=PointingHead serial=124633 13:01:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:01:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:01:18 Point started: ret=0 13:01:18 point_skyscan result=0 13:01:19 Check angles 13:01:19 SkyScan query 13:01:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.92<-21528 Statuses=0008 0009 13:01:19 Msec=0 True Az=112.995 Ze=-142.92 Az status=0008 Ze status=0009 13:01:19 Check angles 13:01:19 SkyScan query 13:01:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.92<-20128 Statuses=0008 0009 13:01:20 Msec=750 True Az=112.995 Ze=-121.92 Az status=0008 Ze status=0009 13:01:20 Check angles 13:01:20 SkyScan query 13:01:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.5<-18700 Statuses=0008 0009 13:01:21 Msec=1500 True Az=112.995 Ze=-100.5 Az status=0008 Ze status=0009 13:01:21 Check angles 13:01:21 SkyScan query 13:01:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.095<-17273 Statuses=0008 0009 13:01:22 Msec=2250 True Az=112.995 Ze=-79.095 Az status=0008 Ze status=0009 13:01:22 Check angles 13:01:22 SkyScan query 13:01:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.14<-15876 Statuses=0008 0009 13:01:22 Msec=3000 True Az=112.995 Ze=-58.14 Az status=0008 Ze status=0009 13:01:22 Check angles 13:01:22 SkyScan query 13:01:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.26<-14484 Statuses=0008 0009 13:01:23 Msec=3750 True Az=112.995 Ze=-37.26 Az status=0008 Ze status=0009 13:01:23 Check angles 13:01:23 SkyScan query 13:01:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.275<-13085 Statuses=0008 0009 13:01:24 Msec=4500 True Az=112.995 Ze=-16.275 Az status=0008 Ze status=0009 13:01:24 Check angles 13:01:24 SkyScan query 13:01:25 SkyScan query done: ret=0 az=112.995<-7533 ze=4.53<-11698 Statuses=0008 0009 13:01:25 Msec=5250 True Az=112.995 Ze=4.53 Az status=0008 Ze status=0009 13:01:25 Check angles 13:01:25 SkyScan query 13:01:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:01:25 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:01:25 Message to Master queued w/err=0: serial=124633 error=0 13:01:30 Received message from Master: op=Filter serial=124634 13:01:30 Color wheel filter change from 0 to 0 13:01:30 FLIGetFilterPos err=0 currentPosition=0 13:01:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:01:30 Filter is already there-color wheel unchanged 13:01:30 Received message from Master: op=Shutter serial=124635 13:01:30 Shutter LASER close 13:01:31 Received message from Camera: op=State serial=124637 13:01:31 GetSingleValue result=40 Value=cccccccc 13:01:31 SkyScan query 13:01:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:01:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:31 Parameters OK 13:01:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:31 Set A/D data flow result=40 13:01:31 Set A/D channel type result=40 13:01:31 Set A/D encoding result=40 13:01:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:31 Set channel filter=0.000000e+000 result=40 13:01:31 Config A/D Result=40 13:01:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:31 Get A/D filter: -9.255963e+061 result=40 13:01:31 Get A/D value=-858993460 result=40 13:01:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:31 Parameters OK 13:01:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:31 Set A/D data flow result=40 13:01:31 Set A/D channel type result=40 13:01:31 Set A/D encoding result=40 13:01:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:31 Set channel filter=0.000000e+000 result=40 13:01:31 Config A/D Result=40 13:01:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:31 Get A/D filter: -9.255963e+061 result=40 13:01:31 Get A/D value=-858993460 result=40 13:01:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:01:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:01:31 Aux= 13:01:31 Message to Camera, serial 124637 queued 13:02:08 Received message from Master: op=PointingHead serial=124650 13:02:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:02:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:02:08 Point started: ret=0 13:02:08 point_skyscan result=0 13:02:09 Check angles 13:02:09 SkyScan query 13:02:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:02:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:02:10 Message to Master queued w/err=0: serial=124650 error=0 13:02:15 Received message from Master: op=Filter serial=124651 13:02:15 Color wheel filter change from 0 to 0 13:02:15 FLIGetFilterPos err=0 currentPosition=0 13:02:15 FLIGetStepsRemaining err=0 RemainingSteps=0 13:02:15 Filter is already there-color wheel unchanged 13:02:15 Received message from Master: op=Shutter serial=124652 13:02:15 Shutter LASER close 13:02:15 Received message from Camera: op=State serial=124654 13:02:15 GetSingleValue result=40 Value=cccccccc 13:02:15 SkyScan query 13:02:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:02:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:16 Parameters OK 13:02:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:16 Set A/D data flow result=40 13:02:16 Set A/D channel type result=40 13:02:16 Set A/D encoding result=40 13:02:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:16 Set channel filter=0.000000e+000 result=40 13:02:16 Config A/D Result=40 13:02:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:16 Get A/D filter: -9.255963e+061 result=40 13:02:16 Get A/D value=-858993460 result=40 13:02:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:16 Parameters OK 13:02:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:16 Set A/D data flow result=40 13:02:16 Set A/D channel type result=40 13:02:16 Set A/D encoding result=40 13:02:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:16 Set channel filter=0.000000e+000 result=40 13:02:16 Config A/D Result=40 13:02:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:16 Get A/D filter: -9.255963e+061 result=40 13:02:16 Get A/D value=-858993460 result=40 13:02:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:02:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:02:16 Aux= 13:02:16 Message to Camera, serial 124654 queued 13:02:52 Received message from Master: op=PointingHead serial=124667 13:02:52 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:02:52 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:02:53 Point started: ret=0 13:02:53 point_skyscan result=0 13:02:54 Check angles 13:02:54 SkyScan query 13:02:54 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 13:02:54 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 13:02:54 Check angles 13:02:54 SkyScan query 13:02:55 SkyScan query done: ret=0 az=153.915<-10261 ze=-6.495<-12433 Statuses=0009 0008 13:02:55 Msec=750 True Az=153.915 Ze=-6.495 Az status=0009 Ze status=0008 13:02:55 Check angles 13:02:55 SkyScan query 13:02:56 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 13:02:56 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 13:02:56 Check angles 13:02:56 SkyScan query 13:02:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:02:56 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:02:56 Message to Master queued w/err=0: serial=124667 error=0 13:03:01 Received message from Master: op=Filter serial=124668 13:03:01 Color wheel filter change from 0 to 0 13:03:01 FLIGetFilterPos err=0 currentPosition=0 13:03:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:03:01 Filter is already there-color wheel unchanged 13:03:02 Received message from Master: op=Shutter serial=124669 13:03:02 Shutter LASER close 13:03:02 Received message from Camera: op=State serial=124671 13:03:02 GetSingleValue result=40 Value=cccccccc 13:03:02 SkyScan query 13:03:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:03:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:02 Parameters OK 13:03:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:02 Set A/D data flow result=40 13:03:02 Set A/D channel type result=40 13:03:02 Set A/D encoding result=40 13:03:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:02 Set channel filter=0.000000e+000 result=40 13:03:02 Config A/D Result=40 13:03:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:02 Get A/D filter: -9.255963e+061 result=40 13:03:02 Get A/D value=-858993460 result=40 13:03:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:02 Parameters OK 13:03:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:02 Set A/D data flow result=40 13:03:02 Set A/D channel type result=40 13:03:02 Set A/D encoding result=40 13:03:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:02 Set channel filter=0.000000e+000 result=40 13:03:02 Config A/D Result=40 13:03:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:02 Get A/D filter: -9.255963e+061 result=40 13:03:02 Get A/D value=-858993460 result=40 13:03:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:03:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:03:02 Aux= 13:03:02 Message to Camera, serial 124671 queued 13:03:38 Received message from Master: op=Identify serial=124680 13:03:39 Received message from Master: op=PointingHead serial=124687 13:03:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:03:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:03:39 Point started: ret=0 13:03:39 point_skyscan result=0 13:03:40 Check angles 13:03:40 SkyScan query 13:03:41 SkyScan query done: ret=0 az=153.135<-10209 ze=6.51<-11566 Statuses=0009 0008 13:03:41 Msec=0 True Az=153.135 Ze=6.51 Az status=0009 Ze status=0008 13:03:41 Check angles 13:03:41 SkyScan query 13:03:41 SkyScan query done: ret=0 az=135.615<-9041 ze=6.495<-11567 Statuses=0009 0008 13:03:41 Msec=750 True Az=135.615 Ze=6.495 Az status=0009 Ze status=0008 13:03:42 Check angles 13:03:42 SkyScan query 13:03:42 SkyScan query done: ret=0 az=117.81<-7854 ze=6.495<-11567 Statuses=0009 0008 13:03:42 Msec=1500 True Az=117.81 Ze=6.495 Az status=0009 Ze status=0008 13:03:42 Check angles 13:03:42 SkyScan query 13:03:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:03:43 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:03:43 Message to Master queued w/err=0: serial=124687 error=0 13:03:48 Received message from Master: op=Filter serial=124688 13:03:48 Color wheel filter change from 0 to 0 13:03:48 FLIGetFilterPos err=0 currentPosition=0 13:03:48 FLIGetStepsRemaining err=0 RemainingSteps=0 13:03:48 Filter is already there-color wheel unchanged 13:03:48 Received message from Master: op=Shutter serial=124689 13:03:48 Shutter LASER close 13:03:48 Received message from Camera: op=State serial=124691 13:03:48 GetSingleValue result=40 Value=cccccccc 13:03:48 SkyScan query 13:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:03:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:49 Parameters OK 13:03:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:49 Set A/D data flow result=40 13:03:49 Set A/D channel type result=40 13:03:49 Set A/D encoding result=40 13:03:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:49 Set channel filter=0.000000e+000 result=40 13:03:49 Config A/D Result=40 13:03:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:49 Get A/D filter: -9.255963e+061 result=40 13:03:49 Get A/D value=-858993460 result=40 13:03:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:49 Parameters OK 13:03:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:49 Set A/D data flow result=40 13:03:49 Set A/D channel type result=40 13:03:49 Set A/D encoding result=40 13:03:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:49 Set channel filter=0.000000e+000 result=40 13:03:49 Config A/D Result=40 13:03:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:49 Get A/D filter: -9.255963e+061 result=40 13:03:49 Get A/D value=-858993460 result=40 13:03:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:03:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:03:49 Aux= 13:03:49 Message to Camera, serial 124691 queued [UTC 2019-3-5 13:03:50] 13:04:26 Received message from Master: op=PointingHead serial=124704 13:04:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:04:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:04:26 Point started: ret=0 13:04:26 point_skyscan result=0 13:04:27 Check angles 13:04:27 SkyScan query 13:04:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.73<-13582 Statuses=0008 0009 13:04:27 Msec=0 True Az=112.995 Ze=-23.73 Az status=0008 Ze status=0009 13:04:27 Check angles 13:04:27 SkyScan query 13:04:28 SkyScan query done: ret=0 az=113.01<-7534 ze=-45.105<-15007 Statuses=0008 0009 13:04:28 Msec=750 True Az=113.01 Ze=-45.105 Az status=0008 Ze status=0009 13:04:28 Check angles 13:04:28 SkyScan query 13:04:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.105<-16407 Statuses=0008 0009 13:04:29 Msec=1500 True Az=112.995 Ze=-66.105 Az status=0008 Ze status=0009 13:04:29 Check angles 13:04:29 SkyScan query 13:04:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.075<-17805 Statuses=0008 0009 13:04:30 Msec=2250 True Az=112.995 Ze=-87.075 Az status=0008 Ze status=0009 13:04:30 Check angles 13:04:30 SkyScan query 13:04:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.465<-19231 Statuses=0008 0009 13:04:30 Msec=3000 True Az=112.995 Ze=-108.465 Az status=0008 Ze status=0009 13:04:30 Check angles 13:04:30 SkyScan query 13:04:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.405<-20627 Statuses=0008 0009 13:04:31 Msec=3750 True Az=112.995 Ze=-129.405 Az status=0008 Ze status=0009 13:04:31 Check angles 13:04:31 SkyScan query 13:04:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.33<-22022 Statuses=0008 0009 13:04:32 Msec=4500 True Az=112.995 Ze=-150.33 Az status=0008 Ze status=0009 13:04:32 Check angles 13:04:32 SkyScan query 13:04:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.12<-23408 Statuses=0008 0009 13:04:33 Msec=5250 True Az=112.995 Ze=-171.12 Az status=0008 Ze status=0009 13:04:33 Check angles 13:04:33 SkyScan query 13:04:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:04:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:04:33 Message to Master queued w/err=0: serial=124704 error=0 13:04:38 Received message from Master: op=Filter serial=124705 13:04:38 Color wheel filter change from 0 to 0 13:04:38 FLIGetFilterPos err=0 currentPosition=0 13:04:38 FLIGetStepsRemaining err=0 RemainingSteps=0 13:04:38 Filter is already there-color wheel unchanged 13:04:38 Received message from Master: op=Shutter serial=124706 13:04:38 Shutter LASER open 13:04:39 Received message from Camera: op=State serial=124708 13:04:39 GetSingleValue result=40 Value=cccccccc 13:04:39 SkyScan query 13:04:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:04:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:39 Parameters OK 13:04:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:39 Set A/D data flow result=40 13:04:39 Set A/D channel type result=40 13:04:39 Set A/D encoding result=40 13:04:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:39 Set channel filter=0.000000e+000 result=40 13:04:39 Config A/D Result=40 13:04:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:39 Get A/D filter: -9.255963e+061 result=40 13:04:39 Get A/D value=-858993460 result=40 13:04:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:39 Parameters OK 13:04:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:39 Set A/D data flow result=40 13:04:39 Set A/D channel type result=40 13:04:39 Set A/D encoding result=40 13:04:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:39 Set channel filter=0.000000e+000 result=40 13:04:39 Config A/D Result=40 13:04:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:39 Get A/D filter: -9.255963e+061 result=40 13:04:39 Get A/D value=-858993460 result=40 13:04:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:04:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:04:39 Aux= 13:04:39 Message to Camera, serial 124708 queued 13:04:48 Received message from Master: op=Shutter serial=124718 13:04:48 Shutter LASER close 13:04:48 Received message from Master: op=PointingHead serial=124722 13:04:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:04:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:04:48 Point started: ret=0 13:04:48 point_skyscan result=0 13:04:49 Check angles 13:04:49 SkyScan query 13:04:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.935<-21529 Statuses=0008 0009 13:04:50 Msec=0 True Az=112.995 Ze=-142.935 Az status=0008 Ze status=0009 13:04:50 Check angles 13:04:50 SkyScan query 13:04:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.95<-20130 Statuses=0008 0009 13:04:51 Msec=750 True Az=112.995 Ze=-121.95 Az status=0008 Ze status=0009 13:04:51 Check angles 13:04:51 SkyScan query 13:04:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.025<-18735 Statuses=0008 0009 13:04:51 Msec=1500 True Az=112.995 Ze=-101.025 Az status=0008 Ze status=0009 13:04:51 Check angles 13:04:51 SkyScan query 13:04:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.055<-17337 Statuses=0008 0009 13:04:52 Msec=2250 True Az=112.995 Ze=-80.055 Az status=0008 Ze status=0009 13:04:52 Check angles 13:04:52 SkyScan query 13:04:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.1<-15940 Statuses=0008 0009 13:04:53 Msec=3000 True Az=112.995 Ze=-59.1 Az status=0008 Ze status=0009 13:04:53 Check angles 13:04:53 SkyScan query 13:04:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.07<-14538 Statuses=0008 0009 13:04:54 Msec=3750 True Az=112.995 Ze=-38.07 Az status=0008 Ze status=0009 13:04:54 Check angles 13:04:54 SkyScan query 13:04:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.13<-13142 Statuses=0008 0009 13:04:54 Msec=4500 True Az=112.995 Ze=-17.13 Az status=0008 Ze status=0009 13:04:54 Check angles 13:04:54 SkyScan query 13:04:55 SkyScan query done: ret=0 az=112.995<-7533 ze=3.825<-11745 Statuses=0008 0009 13:04:55 Msec=5250 True Az=112.995 Ze=3.825 Az status=0008 Ze status=0009 13:04:55 Check angles 13:04:55 SkyScan query 13:04:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:04:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:04:56 Message to Master queued w/err=0: serial=124722 error=0 13:05:01 Received message from Master: op=Filter serial=124723 13:05:01 Color wheel filter change from 0 to 0 13:05:01 FLIGetFilterPos err=0 currentPosition=0 13:05:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:01 Filter is already there-color wheel unchanged 13:05:01 Received message from Master: op=Shutter serial=124724 13:05:01 Shutter LASER close 13:05:01 Received message from Camera: op=State serial=124726 13:05:01 GetSingleValue result=40 Value=cccccccc 13:05:01 SkyScan query 13:05:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:05:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:02 Parameters OK 13:05:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:02 Set A/D data flow result=40 13:05:02 Set A/D channel type result=40 13:05:02 Set A/D encoding result=40 13:05:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:02 Set channel filter=0.000000e+000 result=40 13:05:02 Config A/D Result=40 13:05:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:02 Get A/D filter: -9.255963e+061 result=40 13:05:02 Get A/D value=-858993460 result=40 13:05:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:02 Parameters OK 13:05:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:02 Set A/D data flow result=40 13:05:02 Set A/D channel type result=40 13:05:02 Set A/D encoding result=40 13:05:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:02 Set channel filter=0.000000e+000 result=40 13:05:02 Config A/D Result=40 13:05:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:02 Get A/D filter: -9.255963e+061 result=40 13:05:02 Get A/D value=-858993460 result=40 13:05:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:02 Aux= 13:05:02 Message to Camera, serial 124726 queued 13:05:39 Received message from Master: op=PointingHead serial=124739 13:05:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:05:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:05:39 Point started: ret=0 13:05:39 point_skyscan result=0 13:05:40 Check angles 13:05:40 SkyScan query 13:05:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:05:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:05:40 Message to Master queued w/err=0: serial=124739 error=0 13:05:45 Received message from Master: op=Filter serial=124740 13:05:45 Color wheel filter change from 0 to 0 13:05:45 FLIGetFilterPos err=0 currentPosition=0 13:05:45 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:45 Filter is already there-color wheel unchanged 13:05:45 Received message from Master: op=Shutter serial=124741 13:05:45 Shutter LASER close 13:05:45 Received message from Camera: op=State serial=124743 13:05:45 GetSingleValue result=40 Value=cccccccc 13:05:45 SkyScan query 13:05:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:05:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:46 Parameters OK 13:05:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:46 Set A/D data flow result=40 13:05:46 Set A/D channel type result=40 13:05:46 Set A/D encoding result=40 13:05:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:46 Set channel filter=0.000000e+000 result=40 13:05:46 Config A/D Result=40 13:05:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:46 Get A/D filter: -9.255963e+061 result=40 13:05:46 Get A/D value=-858993460 result=40 13:05:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:46 Parameters OK 13:05:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:46 Set A/D data flow result=40 13:05:46 Set A/D channel type result=40 13:05:46 Set A/D encoding result=40 13:05:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:46 Set channel filter=0.000000e+000 result=40 13:05:46 Config A/D Result=40 13:05:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:46 Get A/D filter: -9.255963e+061 result=40 13:05:46 Get A/D value=-858993460 result=40 13:05:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:46 Aux= 13:05:46 Message to Camera, serial 124743 queued 13:06:23 Received message from Master: op=PointingHead serial=124756 13:06:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:06:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:06:23 Point started: ret=0 13:06:23 point_skyscan result=0 13:06:24 Check angles 13:06:24 SkyScan query 13:06:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:06:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:06:25 Message to Master queued w/err=0: serial=124756 error=0 13:06:30 Received message from Master: op=Filter serial=124757 13:06:30 Color wheel filter change from 0 to 0 13:06:30 FLIGetFilterPos err=0 currentPosition=0 13:06:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:06:30 Filter is already there-color wheel unchanged 13:06:30 Received message from Master: op=Shutter serial=124758 13:06:30 Shutter LASER close 13:06:30 Received message from Camera: op=State serial=124760 13:06:30 GetSingleValue result=40 Value=cccccccc 13:06:30 SkyScan query 13:06:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:06:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:30 Parameters OK 13:06:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:30 Set A/D data flow result=40 13:06:30 Set A/D channel type result=40 13:06:30 Set A/D encoding result=40 13:06:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:30 Set channel filter=0.000000e+000 result=40 13:06:30 Config A/D Result=40 13:06:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:30 Get A/D filter: -9.255963e+061 result=40 13:06:30 Get A/D value=-858993460 result=40 13:06:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:30 Parameters OK 13:06:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:30 Set A/D data flow result=40 13:06:30 Set A/D channel type result=40 13:06:30 Set A/D encoding result=40 13:06:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:30 Set channel filter=0.000000e+000 result=40 13:06:30 Config A/D Result=40 13:06:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:30 Get A/D filter: -9.255963e+061 result=40 13:06:30 Get A/D value=-858993460 result=40 13:06:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:06:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:06:30 Aux= 13:06:30 Message to Camera, serial 124760 queued 13:07:07 Received message from Master: op=PointingHead serial=124773 13:07:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:07:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:07:08 Point started: ret=0 13:07:08 point_skyscan result=0 13:07:08 Check angles 13:07:08 SkyScan query 13:07:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:07:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:07:09 Message to Master queued w/err=0: serial=124773 error=0 13:07:14 Received message from Master: op=Filter serial=124774 13:07:14 Color wheel filter change from 0 to 0 13:07:14 FLIGetFilterPos err=0 currentPosition=0 13:07:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:07:14 Filter is already there-color wheel unchanged 13:07:14 Received message from Master: op=Shutter serial=124775 13:07:14 Shutter LASER close 13:07:14 Received message from Camera: op=State serial=124777 13:07:14 GetSingleValue result=40 Value=cccccccc 13:07:14 SkyScan query 13:07:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:07:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:15 Parameters OK 13:07:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:15 Set A/D data flow result=40 13:07:15 Set A/D channel type result=40 13:07:15 Set A/D encoding result=40 13:07:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:15 Set channel filter=0.000000e+000 result=40 13:07:15 Config A/D Result=40 13:07:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:15 Get A/D filter: -9.255963e+061 result=40 13:07:15 Get A/D value=-858993460 result=40 13:07:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:15 Parameters OK 13:07:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:15 Set A/D data flow result=40 13:07:15 Set A/D channel type result=40 13:07:15 Set A/D encoding result=40 13:07:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:15 Set channel filter=0.000000e+000 result=40 13:07:15 Config A/D Result=40 13:07:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:15 Get A/D filter: -9.255963e+061 result=40 13:07:15 Get A/D value=-858993460 result=40 13:07:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:07:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:07:15 Aux= 13:07:15 Message to Camera, serial 124777 queued 13:07:52 Received message from Master: op=PointingHead serial=124790 13:07:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:07:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:07:52 Point started: ret=0 13:07:52 point_skyscan result=0 13:07:53 Check angles 13:07:53 SkyScan query 13:07:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 13:07:53 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 13:07:53 Check angles 13:07:53 SkyScan query 13:07:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.175<-14945 Statuses=0008 0009 13:07:54 Msec=750 True Az=112.995 Ze=-44.175 Az status=0008 Ze status=0009 13:07:54 Check angles 13:07:54 SkyScan query 13:07:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.475<-16365 Statuses=0008 0009 13:07:55 Msec=1500 True Az=112.995 Ze=-65.475 Az status=0008 Ze status=0009 13:07:55 Check angles 13:07:55 SkyScan query 13:07:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.445<-17763 Statuses=0008 0009 13:07:56 Msec=2250 True Az=112.995 Ze=-86.445 Az status=0008 Ze status=0009 13:07:56 Check angles 13:07:56 SkyScan query 13:07:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 13:07:56 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 13:07:56 Check angles 13:07:56 SkyScan query 13:07:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.37<-20558 Statuses=0008 0009 13:07:57 Msec=3750 True Az=112.995 Ze=-128.37 Az status=0008 Ze status=0009 13:07:57 Check angles 13:07:57 SkyScan query 13:07:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.355<-21957 Statuses=0008 0009 13:07:58 Msec=4500 True Az=112.995 Ze=-149.355 Az status=0008 Ze status=0009 13:07:58 Check angles 13:07:58 SkyScan query 13:07:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.265<-23351 Statuses=0008 0009 13:07:59 Msec=5250 True Az=112.995 Ze=-170.265 Az status=0008 Ze status=0009 13:07:59 Check angles 13:07:59 SkyScan query 13:07:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:07:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:07:59 Message to Master queued w/err=0: serial=124790 error=0 13:08:04 Received message from Master: op=Filter serial=124791 13:08:04 Color wheel filter change from 0 to 0 13:08:04 FLIGetFilterPos err=0 currentPosition=0 13:08:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:08:04 Filter is already there-color wheel unchanged 13:08:04 Received message from Master: op=Shutter serial=124792 13:08:04 Shutter LASER open 13:08:05 Received message from Camera: op=State serial=124794 13:08:05 GetSingleValue result=40 Value=cccccccc 13:08:05 SkyScan query 13:08:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:08:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:05 Parameters OK 13:08:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:05 Set A/D data flow result=40 13:08:05 Set A/D channel type result=40 13:08:05 Set A/D encoding result=40 13:08:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:05 Set channel filter=0.000000e+000 result=40 13:08:05 Config A/D Result=40 13:08:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:05 Get A/D filter: -9.255963e+061 result=40 13:08:05 Get A/D value=-858993460 result=40 13:08:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:05 Parameters OK 13:08:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:05 Set A/D data flow result=40 13:08:05 Set A/D channel type result=40 13:08:05 Set A/D encoding result=40 13:08:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:05 Set channel filter=0.000000e+000 result=40 13:08:05 Config A/D Result=40 13:08:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:05 Get A/D filter: -9.255963e+061 result=40 13:08:05 Get A/D value=-858993460 result=40 13:08:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:08:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:08:05 Aux= 13:08:05 Message to Camera, serial 124794 queued 13:08:14 Received message from Master: op=Shutter serial=124804 13:08:14 Shutter LASER close 13:08:14 Received message from Master: op=PointingHead serial=124808 13:08:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:08:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:08:15 Point started: ret=0 13:08:15 point_skyscan result=0 13:08:15 Check angles 13:08:15 SkyScan query 13:08:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.295<-21553 Statuses=0008 0009 13:08:16 Msec=0 True Az=112.995 Ze=-143.295 Az status=0008 Ze status=0009 13:08:16 Check angles 13:08:16 SkyScan query 13:08:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.34<-20156 Statuses=0008 0009 13:08:17 Msec=750 True Az=112.995 Ze=-122.34 Az status=0008 Ze status=0009 13:08:17 Check angles 13:08:17 SkyScan query 13:08:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.935<-18729 Statuses=0008 0009 13:08:17 Msec=1500 True Az=112.995 Ze=-100.935 Az status=0008 Ze status=0009 13:08:18 Check angles 13:08:18 SkyScan query 13:08:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 13:08:18 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 13:08:18 Check angles 13:08:18 SkyScan query 13:08:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.025<-15935 Statuses=0008 0009 13:08:19 Msec=3000 True Az=112.995 Ze=-59.025 Az status=0008 Ze status=0009 13:08:19 Check angles 13:08:19 SkyScan query 13:08:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 13:08:20 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 13:08:20 Check angles 13:08:20 SkyScan query 13:08:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.635<-13109 Statuses=0008 0009 13:08:20 Msec=4500 True Az=112.995 Ze=-16.635 Az status=0008 Ze status=0009 13:08:21 Check angles 13:08:21 SkyScan query 13:08:21 SkyScan query done: ret=0 az=113.01<-7534 ze=4.245<-11717 Statuses=0008 0009 13:08:21 Msec=5250 True Az=113.01 Ze=4.245 Az status=0008 Ze status=0009 13:08:21 Check angles 13:08:21 SkyScan query 13:08:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:08:22 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:08:22 Message to Master queued w/err=0: serial=124808 error=0 13:08:27 Received message from Master: op=Filter serial=124809 13:08:27 Color wheel filter change from 0 to 0 13:08:27 FLIGetFilterPos err=0 currentPosition=0 13:08:27 FLIGetStepsRemaining err=0 RemainingSteps=0 13:08:27 Filter is already there-color wheel unchanged 13:08:27 Received message from Master: op=Shutter serial=124810 13:08:27 Shutter LASER close 13:08:27 Received message from Camera: op=State serial=124812 13:08:27 GetSingleValue result=40 Value=cccccccc 13:08:27 SkyScan query 13:08:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:08:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:28 Parameters OK 13:08:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:28 Set A/D data flow result=40 13:08:28 Set A/D channel type result=40 13:08:28 Set A/D encoding result=40 13:08:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:28 Set channel filter=0.000000e+000 result=40 13:08:28 Config A/D Result=40 13:08:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:28 Get A/D filter: -9.255963e+061 result=40 13:08:28 Get A/D value=-858993460 result=40 13:08:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:28 Parameters OK 13:08:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:28 Set A/D data flow result=40 13:08:28 Set A/D channel type result=40 13:08:28 Set A/D encoding result=40 13:08:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:28 Set channel filter=0.000000e+000 result=40 13:08:28 Config A/D Result=40 13:08:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:28 Get A/D filter: -9.255963e+061 result=40 13:08:28 Get A/D value=-858993460 result=40 13:08:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:08:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:08:28 Aux= 13:08:28 Message to Camera, serial 124812 queued 13:09:05 Received message from Master: op=PointingHead serial=124825 13:09:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:09:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:09:05 Point started: ret=0 13:09:05 point_skyscan result=0 13:09:06 Check angles 13:09:06 SkyScan query 13:09:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:09:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:09:06 Message to Master queued w/err=0: serial=124825 error=0 13:09:11 Received message from Master: op=Filter serial=124826 13:09:11 Color wheel filter change from 0 to 0 13:09:11 FLIGetFilterPos err=0 currentPosition=0 13:09:11 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:11 Filter is already there-color wheel unchanged 13:09:12 Received message from Master: op=Shutter serial=124827 13:09:12 Shutter LASER close 13:09:12 Received message from Camera: op=State serial=124829 13:09:12 GetSingleValue result=40 Value=cccccccc 13:09:12 SkyScan query 13:09:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:09:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:12 Parameters OK 13:09:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:12 Set A/D data flow result=40 13:09:12 Set A/D channel type result=40 13:09:12 Set A/D encoding result=40 13:09:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:12 Set channel filter=0.000000e+000 result=40 13:09:12 Config A/D Result=40 13:09:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:12 Get A/D filter: -9.255963e+061 result=40 13:09:12 Get A/D value=-858993460 result=40 13:09:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:12 Parameters OK 13:09:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:12 Set A/D data flow result=40 13:09:12 Set A/D channel type result=40 13:09:12 Set A/D encoding result=40 13:09:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:12 Set channel filter=0.000000e+000 result=40 13:09:12 Config A/D Result=40 13:09:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:12 Get A/D filter: -9.255963e+061 result=40 13:09:12 Get A/D value=-858993460 result=40 13:09:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:12 Aux= 13:09:12 Message to Camera, serial 124829 queued 13:09:49 Received message from Master: op=PointingHead serial=124842 13:09:49 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:09:49 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:09:49 Point started: ret=0 13:09:49 point_skyscan result=0 13:09:50 Check angles 13:09:50 SkyScan query 13:09:51 SkyScan query done: ret=0 az=135.93<-9062 ze=-6.51<-12434 Statuses=0009 0008 13:09:51 Msec=0 True Az=135.93 Ze=-6.51 Az status=0009 Ze status=0008 13:09:51 Check angles 13:09:51 SkyScan query 13:09:51 SkyScan query done: ret=0 az=153.48<-10232 ze=-6.51<-12434 Statuses=0009 0008 13:09:51 Msec=750 True Az=153.48 Ze=-6.51 Az status=0009 Ze status=0008 13:09:52 Check angles 13:09:52 SkyScan query 13:09:52 SkyScan query done: ret=0 az=170.895<-11393 ze=-6.495<-12433 Statuses=0009 0008 13:09:52 Msec=1500 True Az=170.895 Ze=-6.495 Az status=0009 Ze status=0008 13:09:52 Check angles 13:09:52 SkyScan query 13:09:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:09:53 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:09:53 Message to Master queued w/err=0: serial=124842 error=0 13:09:58 Received message from Master: op=Filter serial=124843 13:09:58 Color wheel filter change from 0 to 0 13:09:58 FLIGetFilterPos err=0 currentPosition=0 13:09:58 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:58 Filter is already there-color wheel unchanged 13:09:58 Received message from Master: op=Shutter serial=124844 13:09:58 Shutter LASER close 13:09:58 Received message from Camera: op=State serial=124846 13:09:58 GetSingleValue result=40 Value=cccccccc 13:09:58 SkyScan query 13:09:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:09:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:59 Parameters OK 13:09:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:59 Set A/D data flow result=40 13:09:59 Set A/D channel type result=40 13:09:59 Set A/D encoding result=40 13:09:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:59 Set channel filter=0.000000e+000 result=40 13:09:59 Config A/D Result=40 13:09:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:59 Get A/D filter: -9.255963e+061 result=40 13:09:59 Get A/D value=-858993460 result=40 13:09:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:59 Parameters OK 13:09:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:59 Set A/D data flow result=40 13:09:59 Set A/D channel type result=40 13:09:59 Set A/D encoding result=40 13:09:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:59 Set channel filter=0.000000e+000 result=40 13:09:59 Config A/D Result=40 13:09:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:59 Get A/D filter: -9.255963e+061 result=40 13:09:59 Get A/D value=-858993460 result=40 13:09:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:59 Aux= 13:09:59 Message to Camera, serial 124846 queued 13:10:36 Received message from Master: op=PointingHead serial=124859 13:10:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:10:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:10:36 Point started: ret=0 13:10:36 point_skyscan result=0 13:10:37 Check angles 13:10:37 SkyScan query 13:10:37 SkyScan query done: ret=0 az=153.03<-10202 ze=6.51<-11566 Statuses=0009 0008 13:10:37 Msec=0 True Az=153.03 Ze=6.51 Az status=0009 Ze status=0008 13:10:37 Check angles 13:10:37 SkyScan query 13:10:38 SkyScan query done: ret=0 az=135.57<-9038 ze=6.495<-11567 Statuses=0009 0008 13:10:38 Msec=750 True Az=135.57 Ze=6.495 Az status=0009 Ze status=0008 13:10:38 Check angles 13:10:38 SkyScan query 13:10:39 SkyScan query done: ret=0 az=118.095<-7873 ze=6.495<-11567 Statuses=0009 0008 13:10:39 Msec=1500 True Az=118.095 Ze=6.495 Az status=0009 Ze status=0008 13:10:39 Check angles 13:10:39 SkyScan query 13:10:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:10:39 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:10:39 Message to Master queued w/err=0: serial=124859 error=0 13:10:44 Received message from Master: op=Filter serial=124860 13:10:44 Color wheel filter change from 0 to 0 13:10:44 FLIGetFilterPos err=0 currentPosition=0 13:10:44 FLIGetStepsRemaining err=0 RemainingSteps=0 13:10:44 Filter is already there-color wheel unchanged 13:10:45 Received message from Master: op=Shutter serial=124861 13:10:45 Shutter LASER close 13:10:45 Received message from Camera: op=State serial=124863 13:10:45 GetSingleValue result=40 Value=cccccccc 13:10:45 SkyScan query 13:10:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:10:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:45 Parameters OK 13:10:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:45 Set A/D data flow result=40 13:10:45 Set A/D channel type result=40 13:10:45 Set A/D encoding result=40 13:10:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:45 Set channel filter=0.000000e+000 result=40 13:10:45 Config A/D Result=40 13:10:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:45 Get A/D filter: -9.255963e+061 result=40 13:10:45 Get A/D value=-858993460 result=40 13:10:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:45 Parameters OK 13:10:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:45 Set A/D data flow result=40 13:10:45 Set A/D channel type result=40 13:10:45 Set A/D encoding result=40 13:10:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:45 Set channel filter=0.000000e+000 result=40 13:10:45 Config A/D Result=40 13:10:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:45 Get A/D filter: -9.255963e+061 result=40 13:10:45 Get A/D value=-858993460 result=40 13:10:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:10:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:10:45 Aux= 13:10:45 Message to Camera, serial 124863 queued 13:11:22 Received message from Master: op=PointingHead serial=124876 13:11:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:11:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:11:22 Point started: ret=0 13:11:22 point_skyscan result=0 13:11:23 Check angles 13:11:23 SkyScan query 13:11:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 13:11:24 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 13:11:24 Check angles 13:11:24 SkyScan query 13:11:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 13:11:25 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 13:11:25 Check angles 13:11:25 SkyScan query 13:11:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.12<-16408 Statuses=0008 0009 13:11:25 Msec=1500 True Az=112.995 Ze=-66.12 Az status=0008 Ze status=0009 13:11:25 Check angles 13:11:25 SkyScan query 13:11:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.09<-17806 Statuses=0008 0009 13:11:26 Msec=2250 True Az=112.995 Ze=-87.09 Az status=0008 Ze status=0009 13:11:26 Check angles 13:11:26 SkyScan query 13:11:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.06<-19204 Statuses=0008 0009 13:11:27 Msec=3000 True Az=112.995 Ze=-108.06 Az status=0008 Ze status=0009 13:11:27 Check angles 13:11:27 SkyScan query 13:11:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.985<-20599 Statuses=0008 0009 13:11:28 Msec=3750 True Az=112.995 Ze=-128.985 Az status=0008 Ze status=0009 13:11:28 Check angles 13:11:28 SkyScan query 13:11:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.955<-21997 Statuses=0008 0009 13:11:28 Msec=4500 True Az=112.995 Ze=-149.955 Az status=0008 Ze status=0009 13:11:28 Check angles 13:11:28 SkyScan query 13:11:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.835<-23389 Statuses=0008 0009 13:11:29 Msec=5250 True Az=112.995 Ze=-170.835 Az status=0008 Ze status=0009 13:11:29 Check angles 13:11:29 SkyScan query 13:11:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:11:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:11:30 Message to Master queued w/err=0: serial=124876 error=0 13:11:35 Received message from Master: op=Filter serial=124877 13:11:35 Color wheel filter change from 0 to 0 13:11:35 FLIGetFilterPos err=0 currentPosition=0 13:11:35 FLIGetStepsRemaining err=0 RemainingSteps=0 13:11:35 Filter is already there-color wheel unchanged 13:11:35 Received message from Master: op=Shutter serial=124878 13:11:35 Shutter LASER open 13:11:35 Received message from Camera: op=State serial=124880 13:11:35 GetSingleValue result=40 Value=cccccccc 13:11:35 SkyScan query 13:11:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:11:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:36 Parameters OK 13:11:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:36 Set A/D data flow result=40 13:11:36 Set A/D channel type result=40 13:11:36 Set A/D encoding result=40 13:11:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:36 Set channel filter=0.000000e+000 result=40 13:11:36 Config A/D Result=40 13:11:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:36 Get A/D filter: -9.255963e+061 result=40 13:11:36 Get A/D value=-858993460 result=40 13:11:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:36 Parameters OK 13:11:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:36 Set A/D data flow result=40 13:11:36 Set A/D channel type result=40 13:11:36 Set A/D encoding result=40 13:11:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:36 Set channel filter=0.000000e+000 result=40 13:11:36 Config A/D Result=40 13:11:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:36 Get A/D filter: -9.255963e+061 result=40 13:11:36 Get A/D value=-858993460 result=40 13:11:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:11:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:11:36 Aux= 13:11:36 Message to Camera, serial 124880 queued 13:11:43 Received message from Master: op=Shutter serial=124889 13:11:43 Shutter LASER close 13:11:44 Received message from Master: op=PointingHead serial=124893 13:11:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:11:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:11:44 Point started: ret=0 13:11:44 point_skyscan result=0 13:11:45 Check angles 13:11:45 SkyScan query 13:11:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 13:11:45 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 13:11:46 Check angles 13:11:46 SkyScan query 13:11:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.815<-20121 Statuses=0008 0009 13:11:46 Msec=750 True Az=112.995 Ze=-121.815 Az status=0008 Ze status=0009 13:11:46 Check angles 13:11:46 SkyScan query 13:11:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.365<-18691 Statuses=0008 0009 13:11:47 Msec=1500 True Az=112.995 Ze=-100.365 Az status=0008 Ze status=0009 13:11:47 Check angles 13:11:47 SkyScan query 13:11:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.395<-17293 Statuses=0008 0009 13:11:48 Msec=2250 True Az=112.995 Ze=-79.395 Az status=0008 Ze status=0009 13:11:48 Check angles 13:11:48 SkyScan query 13:11:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.455<-15897 Statuses=0008 0009 13:11:48 Msec=3000 True Az=112.995 Ze=-58.455 Az status=0008 Ze status=0009 13:11:49 Check angles 13:11:49 SkyScan query 13:11:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.53<-14502 Statuses=0008 0009 13:11:49 Msec=3750 True Az=112.995 Ze=-37.53 Az status=0008 Ze status=0009 13:11:49 Check angles 13:11:49 SkyScan query 13:11:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.56<-13104 Statuses=0008 0009 13:11:50 Msec=4500 True Az=112.995 Ze=-16.56 Az status=0008 Ze status=0009 13:11:50 Check angles 13:11:50 SkyScan query 13:11:51 SkyScan query done: ret=0 az=112.995<-7533 ze=4.62<-11692 Statuses=0008 0009 13:11:51 Msec=5250 True Az=112.995 Ze=4.62 Az status=0008 Ze status=0009 13:11:51 Check angles 13:11:51 SkyScan query 13:11:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:11:51 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:11:51 Message to Master queued w/err=0: serial=124893 error=0 13:11:56 Received message from Master: op=Filter serial=124894 13:11:56 Color wheel filter change from 0 to 0 13:11:56 FLIGetFilterPos err=0 currentPosition=0 13:11:56 FLIGetStepsRemaining err=0 RemainingSteps=0 13:11:56 Filter is already there-color wheel unchanged 13:11:57 Received message from Master: op=Shutter serial=124895 13:11:57 Shutter LASER close 13:11:57 Received message from Camera: op=State serial=124897 13:11:57 GetSingleValue result=40 Value=cccccccc 13:11:57 SkyScan query 13:11:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:11:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:57 Parameters OK 13:11:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:57 Set A/D data flow result=40 13:11:57 Set A/D channel type result=40 13:11:57 Set A/D encoding result=40 13:11:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:57 Set channel filter=0.000000e+000 result=40 13:11:57 Config A/D Result=40 13:11:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:57 Get A/D filter: -9.255963e+061 result=40 13:11:57 Get A/D value=-858993460 result=40 13:11:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:57 Parameters OK 13:11:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:57 Set A/D data flow result=40 13:11:57 Set A/D channel type result=40 13:11:57 Set A/D encoding result=40 13:11:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:57 Set channel filter=0.000000e+000 result=40 13:11:57 Config A/D Result=40 13:11:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:57 Get A/D filter: -9.255963e+061 result=40 13:11:57 Get A/D value=-858993460 result=40 13:11:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:11:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:11:57 Aux= 13:11:57 Message to Camera, serial 124897 queued 13:12:34 Received message from Master: op=PointingHead serial=124910 13:12:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:12:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:12:34 Point started: ret=0 13:12:34 point_skyscan result=0 13:12:35 Check angles 13:12:35 SkyScan query 13:12:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:12:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:12:36 Message to Master queued w/err=0: serial=124910 error=0 13:12:41 Received message from Master: op=Filter serial=124911 13:12:41 Color wheel filter change from 0 to 0 13:12:41 FLIGetFilterPos err=0 currentPosition=0 13:12:41 FLIGetStepsRemaining err=0 RemainingSteps=0 13:12:41 Filter is already there-color wheel unchanged 13:12:41 Received message from Master: op=Shutter serial=124912 13:12:41 Shutter LASER close 13:12:41 Received message from Camera: op=State serial=124914 13:12:41 GetSingleValue result=40 Value=cccccccc 13:12:41 SkyScan query 13:12:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:12:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:42 Parameters OK 13:12:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:42 Set A/D data flow result=40 13:12:42 Set A/D channel type result=40 13:12:42 Set A/D encoding result=40 13:12:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:42 Set channel filter=0.000000e+000 result=40 13:12:42 Config A/D Result=40 13:12:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:42 Get A/D filter: -9.255963e+061 result=40 13:12:42 Get A/D value=-858993460 result=40 13:12:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:42 Parameters OK 13:12:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:42 Set A/D data flow result=40 13:12:42 Set A/D channel type result=40 13:12:42 Set A/D encoding result=40 13:12:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:42 Set channel filter=0.000000e+000 result=40 13:12:42 Config A/D Result=40 13:12:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:42 Get A/D filter: -9.255963e+061 result=40 13:12:42 Get A/D value=-858993460 result=40 13:12:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:12:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:12:42 Aux= 13:12:42 Message to Camera, serial 124914 queued 13:13:18 Received message from Master: op=PointingHead serial=124927 13:13:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:13:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:13:19 Point started: ret=0 13:13:19 point_skyscan result=0 13:13:19 Check angles 13:13:19 SkyScan query 13:13:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:13:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:13:20 Message to Master queued w/err=0: serial=124927 error=0 13:13:25 Received message from Master: op=Filter serial=124928 13:13:25 Color wheel filter change from 0 to 0 13:13:25 FLIGetFilterPos err=0 currentPosition=0 13:13:25 FLIGetStepsRemaining err=0 RemainingSteps=0 13:13:25 Filter is already there-color wheel unchanged 13:13:25 Received message from Master: op=Shutter serial=124929 13:13:25 Shutter LASER close 13:13:25 Received message from Camera: op=State serial=124931 13:13:25 GetSingleValue result=40 Value=cccccccc 13:13:25 SkyScan query 13:13:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:13:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:26 Parameters OK 13:13:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:26 Set A/D data flow result=40 13:13:26 Set A/D channel type result=40 13:13:26 Set A/D encoding result=40 13:13:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:26 Set channel filter=0.000000e+000 result=40 13:13:26 Config A/D Result=40 13:13:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:26 Get A/D filter: -9.255963e+061 result=40 13:13:26 Get A/D value=-858993460 result=40 13:13:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:26 Parameters OK 13:13:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:26 Set A/D data flow result=40 13:13:26 Set A/D channel type result=40 13:13:26 Set A/D encoding result=40 13:13:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:26 Set channel filter=0.000000e+000 result=40 13:13:26 Config A/D Result=40 13:13:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:26 Get A/D filter: -9.255963e+061 result=40 13:13:26 Get A/D value=-858993460 result=40 13:13:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:13:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:13:26 Aux= 13:13:26 Message to Camera, serial 124931 queued 13:14:03 Received message from Master: op=PointingHead serial=124944 13:14:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:14:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:14:03 Point started: ret=0 13:14:03 point_skyscan result=0 13:14:04 Check angles 13:14:04 SkyScan query 13:14:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:14:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:14:04 Message to Master queued w/err=0: serial=124944 error=0 13:14:09 Received message from Master: op=Filter serial=124945 13:14:09 Color wheel filter change from 0 to 0 13:14:09 FLIGetFilterPos err=0 currentPosition=0 13:14:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:14:09 Filter is already there-color wheel unchanged 13:14:10 Received message from Master: op=Shutter serial=124946 13:14:10 Shutter LASER close 13:14:10 Received message from Camera: op=State serial=124948 13:14:10 GetSingleValue result=40 Value=cccccccc 13:14:10 SkyScan query 13:14:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:14:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:10 Parameters OK 13:14:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:10 Set A/D data flow result=40 13:14:10 Set A/D channel type result=40 13:14:10 Set A/D encoding result=40 13:14:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:10 Set channel filter=0.000000e+000 result=40 13:14:10 Config A/D Result=40 13:14:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:10 Get A/D filter: -9.255963e+061 result=40 13:14:10 Get A/D value=-858993460 result=40 13:14:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:10 Parameters OK 13:14:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:10 Set A/D data flow result=40 13:14:10 Set A/D channel type result=40 13:14:10 Set A/D encoding result=40 13:14:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:10 Set channel filter=0.000000e+000 result=40 13:14:10 Config A/D Result=40 13:14:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:10 Get A/D filter: -9.255963e+061 result=40 13:14:10 Get A/D value=-858993460 result=40 13:14:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:14:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:14:10 Aux= 13:14:10 Message to Camera, serial 124948 queued 13:14:47 Received message from Master: op=PointingHead serial=124961 13:14:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:14:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:14:47 Point started: ret=0 13:14:47 point_skyscan result=0 13:14:48 Check angles 13:14:48 SkyScan query 13:14:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.64<-13576 Statuses=0008 0009 13:14:49 Msec=0 True Az=112.995 Ze=-23.64 Az status=0008 Ze status=0009 13:14:49 Check angles 13:14:49 SkyScan query 13:14:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.58<-14972 Statuses=0008 0009 [UTC 2019-3-5 13:14:49] 13:14:49 Msec=750 True Az=112.995 Ze=-44.58 Az status=0008 Ze status=0009 13:14:50 Check angles 13:14:50 SkyScan query 13:14:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 13:14:50 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 13:14:50 Check angles 13:14:50 SkyScan query 13:14:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.97<-17798 Statuses=0008 0009 13:14:51 Msec=2250 True Az=112.995 Ze=-86.97 Az status=0008 Ze status=0009 13:14:51 Check angles 13:14:51 SkyScan query 13:14:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.94<-19196 Statuses=0008 0009 13:14:52 Msec=3000 True Az=112.995 Ze=-107.94 Az status=0008 Ze status=0009 13:14:52 Check angles 13:14:52 SkyScan query 13:14:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.865<-20591 Statuses=0008 0009 13:14:52 Msec=3750 True Az=112.995 Ze=-128.865 Az status=0008 Ze status=0009 13:14:53 Check angles 13:14:53 SkyScan query 13:14:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.85<-21990 Statuses=0008 0009 13:14:53 Msec=4500 True Az=112.995 Ze=-149.85 Az status=0008 Ze status=0009 13:14:53 Check angles 13:14:53 SkyScan query 13:14:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.745<-23383 Statuses=0008 0009 13:14:54 Msec=5250 True Az=112.995 Ze=-170.745 Az status=0008 Ze status=0009 13:14:54 Check angles 13:14:54 SkyScan query 13:14:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:14:55 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:14:55 Message to Master queued w/err=0: serial=124961 error=0 13:15:00 Received message from Master: op=Filter serial=124962 13:15:00 Color wheel filter change from 0 to 0 13:15:00 FLIGetFilterPos err=0 currentPosition=0 13:15:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:15:00 Filter is already there-color wheel unchanged 13:15:00 Received message from Master: op=Shutter serial=124963 13:15:00 Shutter LASER open 13:15:00 Received message from Camera: op=State serial=124965 13:15:00 GetSingleValue result=40 Value=cccccccc 13:15:00 SkyScan query 13:15:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:15:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:01 Parameters OK 13:15:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:01 Set A/D data flow result=40 13:15:01 Set A/D channel type result=40 13:15:01 Set A/D encoding result=40 13:15:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:01 Set channel filter=0.000000e+000 result=40 13:15:01 Config A/D Result=40 13:15:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:01 Get A/D filter: -9.255963e+061 result=40 13:15:01 Get A/D value=-858993460 result=40 13:15:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:01 Parameters OK 13:15:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:01 Set A/D data flow result=40 13:15:01 Set A/D channel type result=40 13:15:01 Set A/D encoding result=40 13:15:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:01 Set channel filter=0.000000e+000 result=40 13:15:01 Config A/D Result=40 13:15:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:01 Get A/D filter: -9.255963e+061 result=40 13:15:01 Get A/D value=-858993460 result=40 13:15:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:15:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:15:01 Aux= 13:15:01 Message to Camera, serial 124965 queued 13:15:09 Received message from Master: op=Shutter serial=124975 13:15:09 Shutter LASER close 13:15:10 Received message from Master: op=PointingHead serial=124979 13:15:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:15:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:15:10 Point started: ret=0 13:15:10 point_skyscan result=0 13:15:11 Check angles 13:15:11 SkyScan query 13:15:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 13:15:11 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 13:15:11 Check angles 13:15:11 SkyScan query 13:15:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.37<-20158 Statuses=0008 0009 13:15:12 Msec=750 True Az=112.995 Ze=-122.37 Az status=0008 Ze status=0009 13:15:12 Check angles 13:15:12 SkyScan query 13:15:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.43<-18762 Statuses=0008 0009 13:15:13 Msec=1500 True Az=112.995 Ze=-101.43 Az status=0008 Ze status=0009 13:15:13 Check angles 13:15:13 SkyScan query 13:15:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.46<-17364 Statuses=0008 0009 13:15:14 Msec=2250 True Az=112.995 Ze=-80.46 Az status=0008 Ze status=0009 13:15:14 Check angles 13:15:14 SkyScan query 13:15:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.535<-15969 Statuses=0008 0009 13:15:14 Msec=3000 True Az=112.995 Ze=-59.535 Az status=0008 Ze status=0009 13:15:14 Check angles 13:15:14 SkyScan query 13:15:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.55<-14570 Statuses=0008 0009 13:15:15 Msec=3750 True Az=112.995 Ze=-38.55 Az status=0008 Ze status=0009 13:15:15 Check angles 13:15:15 SkyScan query 13:15:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.61<-13174 Statuses=0008 0009 13:15:16 Msec=4500 True Az=112.995 Ze=-17.61 Az status=0008 Ze status=0009 13:15:16 Check angles 13:15:16 SkyScan query 13:15:17 SkyScan query done: ret=0 az=112.98<-7532 ze=3.375<-11775 Statuses=0008 0009 13:15:17 Msec=5250 True Az=112.98 Ze=3.375 Az status=0008 Ze status=0009 13:15:17 Check angles 13:15:17 SkyScan query 13:15:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:15:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:15:17 Message to Master queued w/err=0: serial=124979 error=0 13:15:22 Received message from Master: op=Filter serial=124980 13:15:22 Color wheel filter change from 0 to 0 13:15:22 FLIGetFilterPos err=0 currentPosition=0 13:15:22 FLIGetStepsRemaining err=0 RemainingSteps=0 13:15:22 Filter is already there-color wheel unchanged 13:15:22 Received message from Master: op=Shutter serial=124981 13:15:22 Shutter LASER close 13:15:23 Received message from Camera: op=State serial=124983 13:15:23 GetSingleValue result=40 Value=cccccccc 13:15:23 SkyScan query 13:15:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:15:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:23 Parameters OK 13:15:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:23 Set A/D data flow result=40 13:15:23 Set A/D channel type result=40 13:15:23 Set A/D encoding result=40 13:15:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:23 Set channel filter=0.000000e+000 result=40 13:15:23 Config A/D Result=40 13:15:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:23 Get A/D filter: -9.255963e+061 result=40 13:15:23 Get A/D value=-858993460 result=40 13:15:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:23 Parameters OK 13:15:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:23 Set A/D data flow result=40 13:15:23 Set A/D channel type result=40 13:15:23 Set A/D encoding result=40 13:15:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:23 Set channel filter=0.000000e+000 result=40 13:15:23 Config A/D Result=40 13:15:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:23 Get A/D filter: -9.255963e+061 result=40 13:15:23 Get A/D value=-858993460 result=40 13:15:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:15:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:15:23 Aux= 13:15:23 Message to Camera, serial 124983 queued 13:16:00 Received message from Master: op=PointingHead serial=124996 13:16:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:16:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:16:00 Point started: ret=0 13:16:00 point_skyscan result=0 13:16:01 Check angles 13:16:01 SkyScan query 13:16:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:16:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:16:02 Message to Master queued w/err=0: serial=124996 error=0 13:16:07 Received message from Master: op=Filter serial=124997 13:16:07 Color wheel filter change from 0 to 0 13:16:07 FLIGetFilterPos err=0 currentPosition=0 13:16:07 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:07 Filter is already there-color wheel unchanged 13:16:07 Received message from Master: op=Shutter serial=124998 13:16:07 Shutter LASER close 13:16:07 Received message from Camera: op=State serial=125000 13:16:07 GetSingleValue result=40 Value=cccccccc 13:16:07 SkyScan query 13:16:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:16:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:08 Parameters OK 13:16:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:08 Set A/D data flow result=40 13:16:08 Set A/D channel type result=40 13:16:08 Set A/D encoding result=40 13:16:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:08 Set channel filter=0.000000e+000 result=40 13:16:08 Config A/D Result=40 13:16:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:08 Get A/D filter: -9.255963e+061 result=40 13:16:08 Get A/D value=-858993460 result=40 13:16:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:08 Parameters OK 13:16:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:08 Set A/D data flow result=40 13:16:08 Set A/D channel type result=40 13:16:08 Set A/D encoding result=40 13:16:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:08 Set channel filter=0.000000e+000 result=40 13:16:08 Config A/D Result=40 13:16:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:08 Get A/D filter: -9.255963e+061 result=40 13:16:08 Get A/D value=-858993460 result=40 13:16:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:08 Aux= 13:16:08 Message to Camera, serial 125000 queued 13:16:44 Received message from Master: op=PointingHead serial=125013 13:16:44 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:16:44 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:16:45 Point started: ret=0 13:16:45 point_skyscan result=0 13:16:46 Check angles 13:16:46 SkyScan query 13:16:46 SkyScan query done: ret=0 az=136.38<-9092 ze=-6.51<-12434 Statuses=0009 0008 13:16:46 Msec=0 True Az=136.38 Ze=-6.51 Az status=0009 Ze status=0008 13:16:46 Check angles 13:16:46 SkyScan query 13:16:47 SkyScan query done: ret=0 az=153.885<-10259 ze=-6.495<-12433 Statuses=0009 0008 13:16:47 Msec=750 True Az=153.885 Ze=-6.495 Az status=0009 Ze status=0008 13:16:47 Check angles 13:16:47 SkyScan query 13:16:48 SkyScan query done: ret=0 az=171.3<-11420 ze=-6.495<-12433 Statuses=0009 0008 13:16:48 Msec=1500 True Az=171.3 Ze=-6.495 Az status=0009 Ze status=0008 13:16:48 Check angles 13:16:48 SkyScan query 13:16:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:16:48 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:16:48 Message to Master queued w/err=0: serial=125013 error=0 13:16:53 Received message from Master: op=Filter serial=125014 13:16:53 Color wheel filter change from 0 to 0 13:16:53 FLIGetFilterPos err=0 currentPosition=0 13:16:53 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:53 Filter is already there-color wheel unchanged 13:16:54 Received message from Master: op=Shutter serial=125015 13:16:54 Shutter LASER close 13:16:54 Received message from Camera: op=State serial=125017 13:16:54 GetSingleValue result=40 Value=cccccccc 13:16:54 SkyScan query 13:16:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:16:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:54 Parameters OK 13:16:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:54 Set A/D data flow result=40 13:16:54 Set A/D channel type result=40 13:16:54 Set A/D encoding result=40 13:16:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:54 Set channel filter=0.000000e+000 result=40 13:16:54 Config A/D Result=40 13:16:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:54 Get A/D filter: -9.255963e+061 result=40 13:16:54 Get A/D value=-858993460 result=40 13:16:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:54 Parameters OK 13:16:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:54 Set A/D data flow result=40 13:16:54 Set A/D channel type result=40 13:16:54 Set A/D encoding result=40 13:16:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:54 Set channel filter=0.000000e+000 result=40 13:16:54 Config A/D Result=40 13:16:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:54 Get A/D filter: -9.255963e+061 result=40 13:16:54 Get A/D value=-858993460 result=40 13:16:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:54 Aux= 13:16:54 Message to Camera, serial 125017 queued 13:17:31 Received message from Master: op=PointingHead serial=125030 13:17:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:17:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:17:31 Point started: ret=0 13:17:31 point_skyscan result=0 13:17:32 Check angles 13:17:32 SkyScan query 13:17:33 SkyScan query done: ret=0 az=153.045<-10203 ze=6.51<-11566 Statuses=0009 0008 13:17:33 Msec=0 True Az=153.045 Ze=6.51 Az status=0009 Ze status=0008 13:17:33 Check angles 13:17:33 SkyScan query 13:17:33 SkyScan query done: ret=0 az=135.54<-9036 ze=6.495<-11567 Statuses=0009 0008 13:17:33 Msec=750 True Az=135.54 Ze=6.495 Az status=0009 Ze status=0008 13:17:34 Check angles 13:17:34 SkyScan query 13:17:34 SkyScan query done: ret=0 az=118.065<-7871 ze=6.495<-11567 Statuses=0009 0008 13:17:34 Msec=1500 True Az=118.065 Ze=6.495 Az status=0009 Ze status=0008 13:17:34 Check angles 13:17:34 SkyScan query 13:17:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:17:35 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:17:35 Message to Master queued w/err=0: serial=125030 error=0 13:17:40 Received message from Master: op=Filter serial=125031 13:17:40 Color wheel filter change from 0 to 0 13:17:40 FLIGetFilterPos err=0 currentPosition=0 13:17:40 FLIGetStepsRemaining err=0 RemainingSteps=0 13:17:40 Filter is already there-color wheel unchanged 13:17:40 Received message from Master: op=Shutter serial=125032 13:17:40 Shutter LASER close 13:17:40 Received message from Camera: op=State serial=125034 13:17:40 GetSingleValue result=40 Value=cccccccc 13:17:40 SkyScan query 13:17:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:17:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:41 Parameters OK 13:17:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:41 Set A/D data flow result=40 13:17:41 Set A/D channel type result=40 13:17:41 Set A/D encoding result=40 13:17:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:41 Set channel filter=0.000000e+000 result=40 13:17:41 Config A/D Result=40 13:17:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:41 Get A/D filter: -9.255963e+061 result=40 13:17:41 Get A/D value=-858993460 result=40 13:17:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:41 Parameters OK 13:17:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:41 Set A/D data flow result=40 13:17:41 Set A/D channel type result=40 13:17:41 Set A/D encoding result=40 13:17:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:41 Set channel filter=0.000000e+000 result=40 13:17:41 Config A/D Result=40 13:17:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:41 Get A/D filter: -9.255963e+061 result=40 13:17:41 Get A/D value=-858993460 result=40 13:17:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:17:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:17:41 Aux= 13:17:41 Message to Camera, serial 125034 queued 13:18:18 Received message from Master: op=PointingHead serial=125047 13:18:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:18:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:18:18 Point started: ret=0 13:18:18 point_skyscan result=0 13:18:19 Check angles 13:18:19 SkyScan query 13:18:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.76<-13584 Statuses=0008 0009 13:18:19 Msec=0 True Az=112.995 Ze=-23.76 Az status=0008 Ze status=0009 13:18:19 Check angles 13:18:19 SkyScan query 13:18:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.7<-14980 Statuses=0008 0009 13:18:20 Msec=750 True Az=112.995 Ze=-44.7 Az status=0008 Ze status=0009 13:18:20 Check angles 13:18:20 SkyScan query 13:18:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.655<-16377 Statuses=0008 0009 13:18:21 Msec=1500 True Az=112.995 Ze=-65.655 Az status=0008 Ze status=0009 13:18:21 Check angles 13:18:21 SkyScan query 13:18:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.105<-17807 Statuses=0008 0009 13:18:22 Msec=2250 True Az=112.995 Ze=-87.105 Az status=0008 Ze status=0009 13:18:22 Check angles 13:18:22 SkyScan query 13:18:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.09<-19206 Statuses=0008 0009 13:18:22 Msec=3000 True Az=112.995 Ze=-108.09 Az status=0008 Ze status=0009 13:18:22 Check angles 13:18:22 SkyScan query 13:18:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.015<-20601 Statuses=0008 0009 13:18:23 Msec=3750 True Az=112.995 Ze=-129.015 Az status=0008 Ze status=0009 13:18:23 Check angles 13:18:23 SkyScan query 13:18:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.97<-21998 Statuses=0008 0009 13:18:24 Msec=4500 True Az=112.995 Ze=-149.97 Az status=0008 Ze status=0009 13:18:24 Check angles 13:18:24 SkyScan query 13:18:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.85<-23390 Statuses=0008 0009 13:18:25 Msec=5250 True Az=112.995 Ze=-170.85 Az status=0008 Ze status=0009 13:18:25 Check angles 13:18:25 SkyScan query 13:18:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:18:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:18:25 Message to Master queued w/err=0: serial=125047 error=0 13:18:30 Received message from Master: op=Filter serial=125048 13:18:30 Color wheel filter change from 0 to 0 13:18:30 FLIGetFilterPos err=0 currentPosition=0 13:18:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:18:30 Filter is already there-color wheel unchanged 13:18:30 Received message from Master: op=Shutter serial=125049 13:18:30 Shutter LASER open 13:18:31 Received message from Camera: op=State serial=125051 13:18:31 GetSingleValue result=40 Value=cccccccc 13:18:31 SkyScan query 13:18:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:18:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:31 Parameters OK 13:18:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:31 Set A/D data flow result=40 13:18:31 Set A/D channel type result=40 13:18:31 Set A/D encoding result=40 13:18:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:31 Set channel filter=0.000000e+000 result=40 13:18:31 Config A/D Result=40 13:18:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:31 Get A/D filter: -9.255963e+061 result=40 13:18:31 Get A/D value=-858993460 result=40 13:18:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:31 Parameters OK 13:18:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:31 Set A/D data flow result=40 13:18:31 Set A/D channel type result=40 13:18:31 Set A/D encoding result=40 13:18:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:31 Set channel filter=0.000000e+000 result=40 13:18:31 Config A/D Result=40 13:18:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:31 Get A/D filter: -9.255963e+061 result=40 13:18:31 Get A/D value=-858993460 result=40 13:18:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:18:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:18:31 Aux= 13:18:31 Message to Camera, serial 125051 queued 13:18:40 Received message from Master: op=Shutter serial=125061 13:18:40 Shutter LASER close 13:18:40 Received message from Master: op=PointingHead serial=125065 13:18:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:18:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:18:40 Point started: ret=0 13:18:40 point_skyscan result=0 13:18:41 Check angles 13:18:41 SkyScan query 13:18:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.83<-21522 Statuses=0008 0009 13:18:42 Msec=0 True Az=112.995 Ze=-142.83 Az status=0008 Ze status=0009 13:18:42 Check angles 13:18:42 SkyScan query 13:18:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 13:18:43 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 13:18:43 Check angles 13:18:43 SkyScan query 13:18:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.395<-18693 Statuses=0008 0009 13:18:43 Msec=1500 True Az=112.995 Ze=-100.395 Az status=0008 Ze status=0009 13:18:43 Check angles 13:18:43 SkyScan query 13:18:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.425<-17295 Statuses=0008 0009 13:18:44 Msec=2250 True Az=112.995 Ze=-79.425 Az status=0008 Ze status=0009 13:18:44 Check angles 13:18:44 SkyScan query 13:18:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.485<-15899 Statuses=0008 0009 13:18:45 Msec=3000 True Az=112.995 Ze=-58.485 Az status=0008 Ze status=0009 13:18:45 Check angles 13:18:45 SkyScan query 13:18:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.17<-14478 Statuses=0008 0009 13:18:46 Msec=3750 True Az=112.995 Ze=-37.17 Az status=0008 Ze status=0009 13:18:46 Check angles 13:18:46 SkyScan query 13:18:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.2<-13080 Statuses=0008 0009 13:18:46 Msec=4500 True Az=112.995 Ze=-16.2 Az status=0008 Ze status=0009 13:18:46 Check angles 13:18:46 SkyScan query 13:18:47 SkyScan query done: ret=0 az=112.995<-7533 ze=4.59<-11694 Statuses=0008 0009 13:18:47 Msec=5250 True Az=112.995 Ze=4.59 Az status=0008 Ze status=0009 13:18:47 Check angles 13:18:47 SkyScan query 13:18:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:18:48 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:18:48 Message to Master queued w/err=0: serial=125065 error=0 13:18:53 Received message from Master: op=Filter serial=125066 13:18:53 Color wheel filter change from 0 to 0 13:18:53 FLIGetFilterPos err=0 currentPosition=0 13:18:53 FLIGetStepsRemaining err=0 RemainingSteps=0 13:18:53 Filter is already there-color wheel unchanged 13:18:53 Received message from Master: op=Shutter serial=125067 13:18:53 Shutter LASER close 13:18:53 Received message from Camera: op=State serial=125069 13:18:53 GetSingleValue result=40 Value=cccccccc 13:18:53 SkyScan query 13:18:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:18:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:54 Parameters OK 13:18:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:54 Set A/D data flow result=40 13:18:54 Set A/D channel type result=40 13:18:54 Set A/D encoding result=40 13:18:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:54 Set channel filter=0.000000e+000 result=40 13:18:54 Config A/D Result=40 13:18:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:54 Get A/D filter: -9.255963e+061 result=40 13:18:54 Get A/D value=-858993460 result=40 13:18:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:54 Parameters OK 13:18:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:54 Set A/D data flow result=40 13:18:54 Set A/D channel type result=40 13:18:54 Set A/D encoding result=40 13:18:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:54 Set channel filter=0.000000e+000 result=40 13:18:54 Config A/D Result=40 13:18:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:54 Get A/D filter: -9.255963e+061 result=40 13:18:54 Get A/D value=-858993460 result=40 13:18:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:18:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:18:54 Aux= 13:18:54 Message to Camera, serial 125069 queued 13:19:31 Received message from Master: op=PointingHead serial=125082 13:19:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:19:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:19:31 Point started: ret=0 13:19:31 point_skyscan result=0 13:19:32 Check angles 13:19:32 SkyScan query 13:19:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:19:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:19:32 Message to Master queued w/err=0: serial=125082 error=0 13:19:37 Received message from Master: op=Filter serial=125083 13:19:37 Color wheel filter change from 0 to 0 13:19:37 FLIGetFilterPos err=0 currentPosition=0 13:19:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:19:37 Filter is already there-color wheel unchanged 13:19:37 Received message from Master: op=Shutter serial=125084 13:19:37 Shutter LASER close 13:19:37 Received message from Camera: op=State serial=125086 13:19:37 GetSingleValue result=40 Value=cccccccc 13:19:37 SkyScan query 13:19:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:19:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:38 Parameters OK 13:19:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:38 Set A/D data flow result=40 13:19:38 Set A/D channel type result=40 13:19:38 Set A/D encoding result=40 13:19:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:38 Set channel filter=0.000000e+000 result=40 13:19:38 Config A/D Result=40 13:19:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:38 Get A/D filter: -9.255963e+061 result=40 13:19:38 Get A/D value=-858993460 result=40 13:19:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:38 Parameters OK 13:19:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:38 Set A/D data flow result=40 13:19:38 Set A/D channel type result=40 13:19:38 Set A/D encoding result=40 13:19:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:38 Set channel filter=0.000000e+000 result=40 13:19:38 Config A/D Result=40 13:19:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:38 Get A/D filter: -9.255963e+061 result=40 13:19:38 Get A/D value=-858993460 result=40 13:19:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:19:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:19:38 Aux= 13:19:38 Message to Camera, serial 125086 queued 13:20:15 Received message from Master: op=PointingHead serial=125099 13:20:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:20:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:20:15 Point started: ret=0 13:20:15 point_skyscan result=0 13:20:16 Check angles 13:20:16 SkyScan query 13:20:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:20:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:20:17 Message to Master queued w/err=0: serial=125099 error=0 13:20:22 Received message from Master: op=Filter serial=125100 13:20:22 Color wheel filter change from 0 to 0 13:20:22 FLIGetFilterPos err=0 currentPosition=0 13:20:22 FLIGetStepsRemaining err=0 RemainingSteps=0 13:20:22 Filter is already there-color wheel unchanged 13:20:22 Received message from Master: op=Shutter serial=125101 13:20:22 Shutter LASER close 13:20:22 Received message from Camera: op=State serial=125103 13:20:22 GetSingleValue result=40 Value=cccccccc 13:20:22 SkyScan query 13:20:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:20:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:22 Parameters OK 13:20:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:22 Set A/D data flow result=40 13:20:22 Set A/D channel type result=40 13:20:22 Set A/D encoding result=40 13:20:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:22 Set channel filter=0.000000e+000 result=40 13:20:22 Config A/D Result=40 13:20:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:22 Get A/D filter: -9.255963e+061 result=40 13:20:22 Get A/D value=-858993460 result=40 13:20:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:22 Parameters OK 13:20:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:22 Set A/D data flow result=40 13:20:22 Set A/D channel type result=40 13:20:22 Set A/D encoding result=40 13:20:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:22 Set channel filter=0.000000e+000 result=40 13:20:22 Config A/D Result=40 13:20:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:22 Get A/D filter: -9.255963e+061 result=40 13:20:22 Get A/D value=-858993460 result=40 13:20:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:20:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:20:22 Aux= 13:20:22 Message to Camera, serial 125103 queued 13:20:59 Received message from Master: op=PointingHead serial=125116 13:20:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:20:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:21:00 Point started: ret=0 13:21:00 point_skyscan result=0 13:21:00 Check angles 13:21:00 SkyScan query 13:21:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:21:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:21:01 Message to Master queued w/err=0: serial=125116 error=0 13:21:06 Received message from Master: op=Filter serial=125117 13:21:06 Color wheel filter change from 0 to 0 13:21:06 FLIGetFilterPos err=0 currentPosition=0 13:21:06 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:06 Filter is already there-color wheel unchanged 13:21:06 Received message from Master: op=Shutter serial=125118 13:21:06 Shutter LASER close 13:21:06 Received message from Camera: op=State serial=125120 13:21:06 GetSingleValue result=40 Value=cccccccc 13:21:06 SkyScan query 13:21:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:21:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:07 Parameters OK 13:21:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:07 Set A/D data flow result=40 13:21:07 Set A/D channel type result=40 13:21:07 Set A/D encoding result=40 13:21:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:07 Set channel filter=0.000000e+000 result=40 13:21:07 Config A/D Result=40 13:21:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:07 Get A/D filter: -9.255963e+061 result=40 13:21:07 Get A/D value=-858993460 result=40 13:21:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:07 Parameters OK 13:21:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:07 Set A/D data flow result=40 13:21:07 Set A/D channel type result=40 13:21:07 Set A/D encoding result=40 13:21:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:07 Set channel filter=0.000000e+000 result=40 13:21:07 Config A/D Result=40 13:21:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:07 Get A/D filter: -9.255963e+061 result=40 13:21:07 Get A/D value=-858993460 result=40 13:21:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:07 Aux= 13:21:07 Message to Camera, serial 125120 queued 13:21:44 Received message from Master: op=PointingHead serial=125133 13:21:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:21:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:21:44 Point started: ret=0 13:21:44 point_skyscan result=0 13:21:45 Check angles 13:21:45 SkyScan query 13:21:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.55<-13570 Statuses=0008 0009 13:21:45 Msec=0 True Az=112.995 Ze=-23.55 Az status=0008 Ze status=0009 13:21:45 Check angles 13:21:45 SkyScan query 13:21:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 13:21:46 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 13:21:46 Check angles 13:21:46 SkyScan query 13:21:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.88<-16392 Statuses=0008 0009 13:21:47 Msec=1500 True Az=112.995 Ze=-65.88 Az status=0008 Ze status=0009 13:21:47 Check angles 13:21:47 SkyScan query 13:21:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.865<-17791 Statuses=0008 0009 13:21:48 Msec=2250 True Az=112.995 Ze=-86.865 Az status=0008 Ze status=0009 13:21:48 Check angles 13:21:48 SkyScan query 13:21:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.835<-19189 Statuses=0008 0009 13:21:48 Msec=3000 True Az=112.995 Ze=-107.835 Az status=0008 Ze status=0009 13:21:48 Check angles 13:21:48 SkyScan query 13:21:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.775<-20585 Statuses=0008 0009 13:21:49 Msec=3750 True Az=112.995 Ze=-128.775 Az status=0008 Ze status=0009 13:21:49 Check angles 13:21:49 SkyScan query 13:21:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.165<-22011 Statuses=0008 0009 13:21:50 Msec=4500 True Az=112.995 Ze=-150.165 Az status=0008 Ze status=0009 13:21:50 Check angles 13:21:50 SkyScan query 13:21:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.985<-23399 Statuses=0008 0009 13:21:51 Msec=5250 True Az=112.995 Ze=-170.985 Az status=0008 Ze status=0009 13:21:51 Check angles 13:21:51 SkyScan query 13:21:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:21:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:21:51 Message to Master queued w/err=0: serial=125133 error=0 13:21:56 Received message from Master: op=Filter serial=125134 13:21:56 Color wheel filter change from 0 to 0 13:21:56 FLIGetFilterPos err=0 currentPosition=0 13:21:56 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:56 Filter is already there-color wheel unchanged 13:21:56 Received message from Master: op=Shutter serial=125135 13:21:56 Shutter LASER open 13:21:57 Received message from Camera: op=State serial=125137 13:21:57 GetSingleValue result=40 Value=cccccccc 13:21:57 SkyScan query 13:21:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:21:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:57 Parameters OK 13:21:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:57 Set A/D data flow result=40 13:21:57 Set A/D channel type result=40 13:21:57 Set A/D encoding result=40 13:21:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:57 Set channel filter=0.000000e+000 result=40 13:21:57 Config A/D Result=40 13:21:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:57 Get A/D filter: -9.255963e+061 result=40 13:21:57 Get A/D value=-858993460 result=40 13:21:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:57 Parameters OK 13:21:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:57 Set A/D data flow result=40 13:21:57 Set A/D channel type result=40 13:21:57 Set A/D encoding result=40 13:21:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:57 Set channel filter=0.000000e+000 result=40 13:21:57 Config A/D Result=40 13:21:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:57 Get A/D filter: -9.255963e+061 result=40 13:21:57 Get A/D value=-858993460 result=40 13:21:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:57 Aux= 13:21:57 Message to Camera, serial 125137 queued 13:22:06 Received message from Master: op=Shutter serial=125147 13:22:06 Shutter LASER close 13:22:06 Received message from Master: op=PointingHead serial=125151 13:22:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:22:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:22:07 Point started: ret=0 13:22:07 point_skyscan result=0 13:22:07 Check angles 13:22:07 SkyScan query 13:22:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.74<-21516 Statuses=0008 0009 13:22:08 Msec=0 True Az=112.995 Ze=-142.74 Az status=0008 Ze status=0009 13:22:08 Check angles 13:22:08 SkyScan query 13:22:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.755<-20117 Statuses=0008 0009 13:22:09 Msec=750 True Az=112.995 Ze=-121.755 Az status=0008 Ze status=0009 13:22:09 Check angles 13:22:09 SkyScan query 13:22:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.815<-18721 Statuses=0008 0009 13:22:09 Msec=1500 True Az=112.995 Ze=-100.815 Az status=0008 Ze status=0009 13:22:10 Check angles 13:22:10 SkyScan query 13:22:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.845<-17323 Statuses=0008 0009 13:22:10 Msec=2250 True Az=112.995 Ze=-79.845 Az status=0008 Ze status=0009 13:22:10 Check angles 13:22:10 SkyScan query 13:22:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.89<-15926 Statuses=0008 0009 13:22:11 Msec=3000 True Az=112.995 Ze=-58.89 Az status=0008 Ze status=0009 13:22:11 Check angles 13:22:11 SkyScan query 13:22:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.875<-14525 Statuses=0008 0009 13:22:12 Msec=3750 True Az=112.995 Ze=-37.875 Az status=0008 Ze status=0009 13:22:12 Check angles 13:22:12 SkyScan query 13:22:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.935<-13129 Statuses=0008 0009 13:22:12 Msec=4500 True Az=112.995 Ze=-16.935 Az status=0008 Ze status=0009 13:22:13 Check angles 13:22:13 SkyScan query 13:22:13 SkyScan query done: ret=0 az=112.995<-7533 ze=4.005<-11733 Statuses=0008 0009 13:22:13 Msec=5250 True Az=112.995 Ze=4.005 Az status=0008 Ze status=0009 13:22:13 Check angles 13:22:13 SkyScan query 13:22:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:22:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:22:14 Message to Master queued w/err=0: serial=125151 error=0 13:22:19 Received message from Master: op=Filter serial=125152 13:22:19 Color wheel filter change from 0 to 0 13:22:19 FLIGetFilterPos err=0 currentPosition=0 13:22:19 FLIGetStepsRemaining err=0 RemainingSteps=0 13:22:19 Filter is already there-color wheel unchanged 13:22:19 Received message from Master: op=Shutter serial=125153 13:22:19 Shutter LASER close 13:22:19 Received message from Camera: op=State serial=125155 13:22:19 GetSingleValue result=40 Value=cccccccc 13:22:19 SkyScan query 13:22:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:22:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:20 Parameters OK 13:22:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:20 Set A/D data flow result=40 13:22:20 Set A/D channel type result=40 13:22:20 Set A/D encoding result=40 13:22:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:20 Set channel filter=0.000000e+000 result=40 13:22:20 Config A/D Result=40 13:22:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:20 Get A/D filter: -9.255963e+061 result=40 13:22:20 Get A/D value=-858993460 result=40 13:22:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:20 Parameters OK 13:22:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:20 Set A/D data flow result=40 13:22:20 Set A/D channel type result=40 13:22:20 Set A/D encoding result=40 13:22:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:20 Set channel filter=0.000000e+000 result=40 13:22:20 Config A/D Result=40 13:22:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:20 Get A/D filter: -9.255963e+061 result=40 13:22:20 Get A/D value=-858993460 result=40 13:22:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:22:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:22:20 Aux= 13:22:20 Message to Camera, serial 125155 queued 13:22:56 Received message from Master: op=PointingHead serial=125167 13:22:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:22:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:22:56 Point started: ret=0 13:22:56 point_skyscan result=0 13:22:57 Check angles 13:22:57 SkyScan query 13:22:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:22:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:22:57 Message to Master queued w/err=0: serial=125167 error=0 13:23:02 Received message from Master: op=Filter serial=125168 13:23:02 Color wheel filter change from 0 to 0 13:23:02 FLIGetFilterPos err=0 currentPosition=0 13:23:02 FLIGetStepsRemaining err=0 RemainingSteps=0 13:23:02 Filter is already there-color wheel unchanged 13:23:03 Received message from Master: op=Shutter serial=125169 13:23:03 Shutter LASER close 13:23:03 Received message from Camera: op=State serial=125171 13:23:03 GetSingleValue result=40 Value=cccccccc 13:23:03 SkyScan query 13:23:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:23:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:03 Parameters OK 13:23:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:03 Set A/D data flow result=40 13:23:03 Set A/D channel type result=40 13:23:03 Set A/D encoding result=40 13:23:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:03 Set channel filter=0.000000e+000 result=40 13:23:03 Config A/D Result=40 13:23:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:03 Get A/D filter: -9.255963e+061 result=40 13:23:03 Get A/D value=-858993460 result=40 13:23:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:03 Parameters OK 13:23:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:03 Set A/D data flow result=40 13:23:03 Set A/D channel type result=40 13:23:03 Set A/D encoding result=40 13:23:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:03 Set channel filter=0.000000e+000 result=40 13:23:03 Config A/D Result=40 13:23:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:03 Get A/D filter: -9.255963e+061 result=40 13:23:03 Get A/D value=-858993460 result=40 13:23:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:03 Aux= 13:23:03 Message to Camera, serial 125171 queued 13:23:40 Received message from Master: op=PointingHead serial=125184 13:23:40 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:23:40 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:23:40 Point started: ret=0 13:23:40 point_skyscan result=0 13:23:41 Check angles 13:23:41 SkyScan query 13:23:42 SkyScan query done: ret=0 az=135.735<-9049 ze=-6.51<-12434 Statuses=0009 0008 13:23:42 Msec=0 True Az=135.735 Ze=-6.51 Az status=0009 Ze status=0008 13:23:42 Check angles 13:23:42 SkyScan query 13:23:42 SkyScan query done: ret=0 az=153.27<-10218 ze=-6.51<-12434 Statuses=0009 0008 13:23:42 Msec=750 True Az=153.27 Ze=-6.51 Az status=0009 Ze status=0008 13:23:43 Check angles 13:23:43 SkyScan query 13:23:43 SkyScan query done: ret=0 az=170.715<-11381 ze=-6.495<-12433 Statuses=0009 0008 13:23:43 Msec=1500 True Az=170.715 Ze=-6.495 Az status=0009 Ze status=0008 13:23:43 Check angles 13:23:43 SkyScan query 13:23:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:23:44 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:23:44 Message to Master queued w/err=0: serial=125184 error=0 13:23:49 Received message from Master: op=Filter serial=125185 13:23:49 Color wheel filter change from 0 to 0 13:23:49 FLIGetFilterPos err=0 currentPosition=0 13:23:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:23:49 Filter is already there-color wheel unchanged 13:23:49 Received message from Master: op=Shutter serial=125186 13:23:49 Shutter LASER close 13:23:49 Received message from Camera: op=State serial=125188 13:23:49 GetSingleValue result=40 Value=cccccccc 13:23:49 SkyScan query 13:23:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:23:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:50 Parameters OK 13:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:50 Set A/D data flow result=40 13:23:50 Set A/D channel type result=40 13:23:50 Set A/D encoding result=40 13:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:50 Set channel filter=0.000000e+000 result=40 13:23:50 Config A/D Result=40 13:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:50 Get A/D filter: -9.255963e+061 result=40 13:23:50 Get A/D value=-858993460 result=40 13:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:50 Parameters OK 13:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:50 Set A/D data flow result=40 13:23:50 Set A/D channel type result=40 13:23:50 Set A/D encoding result=40 13:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:50 Set channel filter=0.000000e+000 result=40 13:23:50 Config A/D Result=40 13:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:50 Get A/D filter: -9.255963e+061 result=40 13:23:50 Get A/D value=-858993460 result=40 13:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:50 Aux= 13:23:50 Message to Camera, serial 125188 queued [UTC 2019-3-5 13:23:50] 13:24:27 Received message from Master: op=PointingHead serial=125201 13:24:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:24:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:24:27 Point started: ret=0 13:24:27 point_skyscan result=0 13:24:28 Check angles 13:24:28 SkyScan query 13:24:28 SkyScan query done: ret=0 az=152.835<-10189 ze=6.51<-11566 Statuses=0009 0008 13:24:28 Msec=0 True Az=152.835 Ze=6.51 Az status=0009 Ze status=0008 13:24:28 Check angles 13:24:28 SkyScan query 13:24:29 SkyScan query done: ret=0 az=135.345<-9023 ze=6.495<-11567 Statuses=0009 0008 13:24:29 Msec=750 True Az=135.345 Ze=6.495 Az status=0009 Ze status=0008 13:24:29 Check angles 13:24:29 SkyScan query 13:24:30 SkyScan query done: ret=0 az=118.02<-7868 ze=6.495<-11567 Statuses=0009 0008 13:24:30 Msec=1500 True Az=118.02 Ze=6.495 Az status=0009 Ze status=0008 13:24:30 Check angles 13:24:30 SkyScan query 13:24:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:24:30 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:24:30 Message to Master queued w/err=0: serial=125201 error=0 13:24:35 Received message from Master: op=Filter serial=125202 13:24:35 Color wheel filter change from 0 to 0 13:24:35 FLIGetFilterPos err=0 currentPosition=0 13:24:35 FLIGetStepsRemaining err=0 RemainingSteps=0 13:24:35 Filter is already there-color wheel unchanged 13:24:36 Received message from Master: op=Shutter serial=125203 13:24:36 Shutter LASER close 13:24:36 Received message from Camera: op=State serial=125205 13:24:36 GetSingleValue result=40 Value=cccccccc 13:24:36 SkyScan query 13:24:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:24:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:36 Parameters OK 13:24:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:36 Set A/D data flow result=40 13:24:36 Set A/D channel type result=40 13:24:36 Set A/D encoding result=40 13:24:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:36 Set channel filter=0.000000e+000 result=40 13:24:36 Config A/D Result=40 13:24:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:36 Get A/D filter: -9.255963e+061 result=40 13:24:36 Get A/D value=-858993460 result=40 13:24:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:36 Parameters OK 13:24:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:36 Set A/D data flow result=40 13:24:36 Set A/D channel type result=40 13:24:36 Set A/D encoding result=40 13:24:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:36 Set channel filter=0.000000e+000 result=40 13:24:36 Config A/D Result=40 13:24:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:36 Get A/D filter: -9.255963e+061 result=40 13:24:36 Get A/D value=-858993460 result=40 13:24:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:24:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:24:36 Aux= 13:24:36 Message to Camera, serial 125205 queued 13:25:13 Received message from Master: op=PointingHead serial=125218 13:25:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:25:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:25:13 Point started: ret=0 13:25:13 point_skyscan result=0 13:25:14 Check angles 13:25:14 SkyScan query 13:25:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.13<-13542 Statuses=0008 0009 13:25:15 Msec=0 True Az=112.995 Ze=-23.13 Az status=0008 Ze status=0009 13:25:15 Check angles 13:25:15 SkyScan query 13:25:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 13:25:16 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 13:25:16 Check angles 13:25:16 SkyScan query 13:25:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.995<-16333 Statuses=0008 0009 13:25:16 Msec=1500 True Az=112.995 Ze=-64.995 Az status=0008 Ze status=0009 13:25:16 Check angles 13:25:16 SkyScan query 13:25:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.95<-17730 Statuses=0008 0009 13:25:17 Msec=2250 True Az=112.995 Ze=-85.95 Az status=0008 Ze status=0009 13:25:17 Check angles 13:25:17 SkyScan query 13:25:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.83<-19122 Statuses=0008 0009 13:25:18 Msec=3000 True Az=112.995 Ze=-106.83 Az status=0008 Ze status=0009 13:25:18 Check angles 13:25:18 SkyScan query 13:25:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.815<-20521 Statuses=0008 0009 13:25:19 Msec=3750 True Az=112.995 Ze=-127.815 Az status=0008 Ze status=0009 13:25:19 Check angles 13:25:19 SkyScan query 13:25:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.28<-21952 Statuses=0008 0009 13:25:19 Msec=4500 True Az=112.995 Ze=-149.28 Az status=0008 Ze status=0009 13:25:19 Check angles 13:25:19 SkyScan query 13:25:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.205<-23347 Statuses=0008 0009 13:25:20 Msec=5250 True Az=112.995 Ze=-170.205 Az status=0008 Ze status=0009 13:25:20 Check angles 13:25:20 SkyScan query 13:25:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:25:21 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:25:21 Message to Master queued w/err=0: serial=125218 error=0 13:25:26 Received message from Master: op=Filter serial=125219 13:25:26 Color wheel filter change from 0 to 0 13:25:26 FLIGetFilterPos err=0 currentPosition=0 13:25:26 FLIGetStepsRemaining err=0 RemainingSteps=0 13:25:26 Filter is already there-color wheel unchanged 13:25:26 Received message from Master: op=Shutter serial=125220 13:25:26 Shutter LASER open 13:25:26 Received message from Camera: op=State serial=125222 13:25:26 GetSingleValue result=40 Value=cccccccc 13:25:26 SkyScan query 13:25:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:25:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:27 Parameters OK 13:25:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:27 Set A/D data flow result=40 13:25:27 Set A/D channel type result=40 13:25:27 Set A/D encoding result=40 13:25:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:27 Set channel filter=0.000000e+000 result=40 13:25:27 Config A/D Result=40 13:25:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:27 Get A/D filter: -9.255963e+061 result=40 13:25:27 Get A/D value=-858993460 result=40 13:25:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:27 Parameters OK 13:25:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:27 Set A/D data flow result=40 13:25:27 Set A/D channel type result=40 13:25:27 Set A/D encoding result=40 13:25:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:27 Set channel filter=0.000000e+000 result=40 13:25:27 Config A/D Result=40 13:25:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:27 Get A/D filter: -9.255963e+061 result=40 13:25:27 Get A/D value=-858993460 result=40 13:25:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:25:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:25:27 Aux= 13:25:27 Message to Camera, serial 125222 queued 13:25:35 Received message from Master: op=Shutter serial=125232 13:25:35 Shutter LASER close 13:25:36 Received message from Master: op=PointingHead serial=125236 13:25:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:25:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:25:36 Point started: ret=0 13:25:36 point_skyscan result=0 13:25:37 Check angles 13:25:37 SkyScan query 13:25:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.74<-21516 Statuses=0008 0009 13:25:37 Msec=0 True Az=112.995 Ze=-142.74 Az status=0008 Ze status=0009 13:25:38 Check angles 13:25:38 SkyScan query 13:25:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.32<-20088 Statuses=0008 0009 13:25:38 Msec=750 True Az=112.995 Ze=-121.32 Az status=0008 Ze status=0009 13:25:38 Check angles 13:25:38 SkyScan query 13:25:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.32<-18688 Statuses=0008 0009 13:25:39 Msec=1500 True Az=112.995 Ze=-100.32 Az status=0008 Ze status=0009 13:25:39 Check angles 13:25:39 SkyScan query 13:25:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.35<-17290 Statuses=0008 0009 13:25:40 Msec=2250 True Az=112.995 Ze=-79.35 Az status=0008 Ze status=0009 13:25:40 Check angles 13:25:40 SkyScan query 13:25:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.41<-15894 Statuses=0008 0009 13:25:40 Msec=3000 True Az=112.995 Ze=-58.41 Az status=0008 Ze status=0009 13:25:41 Check angles 13:25:41 SkyScan query 13:25:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.11<-14474 Statuses=0008 0009 13:25:41 Msec=3750 True Az=112.995 Ze=-37.11 Az status=0008 Ze status=0009 13:25:41 Check angles 13:25:41 SkyScan query 13:25:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.14<-13076 Statuses=0008 0009 13:25:42 Msec=4500 True Az=112.995 Ze=-16.14 Az status=0008 Ze status=0009 13:25:42 Check angles 13:25:42 SkyScan query 13:25:43 SkyScan query done: ret=0 az=112.995<-7533 ze=4.635<-11691 Statuses=0008 0009 13:25:43 Msec=5250 True Az=112.995 Ze=4.635 Az status=0008 Ze status=0009 13:25:43 Check angles 13:25:43 SkyScan query 13:25:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:25:43 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:25:43 Message to Master queued w/err=0: serial=125236 error=0 13:25:48 Received message from Master: op=Filter serial=125237 13:25:48 Color wheel filter change from 0 to 0 13:25:48 FLIGetFilterPos err=0 currentPosition=0 13:25:48 FLIGetStepsRemaining err=0 RemainingSteps=0 13:25:48 Filter is already there-color wheel unchanged 13:25:49 Received message from Master: op=Shutter serial=125238 13:25:49 Shutter LASER close 13:25:49 Received message from Camera: op=State serial=125240 13:25:49 GetSingleValue result=40 Value=cccccccc 13:25:49 SkyScan query 13:25:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:25:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:49 Parameters OK 13:25:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:49 Set A/D data flow result=40 13:25:49 Set A/D channel type result=40 13:25:49 Set A/D encoding result=40 13:25:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:49 Set channel filter=0.000000e+000 result=40 13:25:49 Config A/D Result=40 13:25:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:49 Get A/D filter: -9.255963e+061 result=40 13:25:49 Get A/D value=-858993460 result=40 13:25:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:49 Parameters OK 13:25:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:49 Set A/D data flow result=40 13:25:49 Set A/D channel type result=40 13:25:49 Set A/D encoding result=40 13:25:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:49 Set channel filter=0.000000e+000 result=40 13:25:49 Config A/D Result=40 13:25:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:49 Get A/D filter: -9.255963e+061 result=40 13:25:49 Get A/D value=-858993460 result=40 13:25:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:25:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:25:49 Aux= 13:25:49 Message to Camera, serial 125240 queued 13:26:26 Received message from Master: op=PointingHead serial=125253 13:26:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:26:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:26:26 Point started: ret=0 13:26:26 point_skyscan result=0 13:26:27 Check angles 13:26:27 SkyScan query 13:26:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:26:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:26:28 Message to Master queued w/err=0: serial=125253 error=0 13:26:33 Received message from Master: op=Filter serial=125254 13:26:33 Color wheel filter change from 0 to 0 13:26:33 FLIGetFilterPos err=0 currentPosition=0 13:26:33 FLIGetStepsRemaining err=0 RemainingSteps=0 13:26:33 Filter is already there-color wheel unchanged 13:26:33 Received message from Master: op=Shutter serial=125255 13:26:33 Shutter LASER close 13:26:33 Received message from Camera: op=State serial=125257 13:26:33 GetSingleValue result=40 Value=cccccccc 13:26:33 SkyScan query 13:26:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:26:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:34 Parameters OK 13:26:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:34 Set A/D data flow result=40 13:26:34 Set A/D channel type result=40 13:26:34 Set A/D encoding result=40 13:26:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:34 Set channel filter=0.000000e+000 result=40 13:26:34 Config A/D Result=40 13:26:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:34 Get A/D filter: -9.255963e+061 result=40 13:26:34 Get A/D value=-858993460 result=40 13:26:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:34 Parameters OK 13:26:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:34 Set A/D data flow result=40 13:26:34 Set A/D channel type result=40 13:26:34 Set A/D encoding result=40 13:26:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:34 Set channel filter=0.000000e+000 result=40 13:26:34 Config A/D Result=40 13:26:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:34 Get A/D filter: -9.255963e+061 result=40 13:26:34 Get A/D value=-858993460 result=40 13:26:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:26:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:26:34 Aux= 13:26:34 Message to Camera, serial 125257 queued 13:27:10 Received message from Master: op=PointingHead serial=125270 13:27:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:27:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:27:11 Point started: ret=0 13:27:11 point_skyscan result=0 13:27:12 Check angles 13:27:12 SkyScan query 13:27:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:27:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:27:12 Message to Master queued w/err=0: serial=125270 error=0 13:27:17 Received message from Master: op=Filter serial=125271 13:27:17 Color wheel filter change from 0 to 0 13:27:17 FLIGetFilterPos err=0 currentPosition=0 13:27:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:27:17 Filter is already there-color wheel unchanged 13:27:17 Received message from Master: op=Shutter serial=125272 13:27:17 Shutter LASER close 13:27:17 Received message from Camera: op=State serial=125274 13:27:17 GetSingleValue result=40 Value=cccccccc 13:27:17 SkyScan query 13:27:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:27:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:18 Parameters OK 13:27:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:18 Set A/D data flow result=40 13:27:18 Set A/D channel type result=40 13:27:18 Set A/D encoding result=40 13:27:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:18 Set channel filter=0.000000e+000 result=40 13:27:18 Config A/D Result=40 13:27:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:18 Get A/D filter: -9.255963e+061 result=40 13:27:18 Get A/D value=-858993460 result=40 13:27:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:18 Parameters OK 13:27:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:18 Set A/D data flow result=40 13:27:18 Set A/D channel type result=40 13:27:18 Set A/D encoding result=40 13:27:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:18 Set channel filter=0.000000e+000 result=40 13:27:18 Config A/D Result=40 13:27:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:18 Get A/D filter: -9.255963e+061 result=40 13:27:18 Get A/D value=-858993460 result=40 13:27:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:27:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:27:18 Aux= 13:27:18 Message to Camera, serial 125274 queued 13:27:55 Received message from Master: op=PointingHead serial=125287 13:27:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:27:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:27:55 Point started: ret=0 13:27:55 point_skyscan result=0 13:27:56 Check angles 13:27:56 SkyScan query 13:27:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:27:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:27:56 Message to Master queued w/err=0: serial=125287 error=0 13:28:01 Received message from Master: op=Filter serial=125288 13:28:01 Color wheel filter change from 0 to 0 13:28:01 FLIGetFilterPos err=0 currentPosition=0 13:28:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:01 Filter is already there-color wheel unchanged 13:28:02 Received message from Master: op=Shutter serial=125289 13:28:02 Shutter LASER close 13:28:02 Received message from Camera: op=State serial=125291 13:28:02 GetSingleValue result=40 Value=cccccccc 13:28:02 SkyScan query 13:28:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:28:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:02 Parameters OK 13:28:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:02 Set A/D data flow result=40 13:28:02 Set A/D channel type result=40 13:28:02 Set A/D encoding result=40 13:28:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:02 Set channel filter=0.000000e+000 result=40 13:28:02 Config A/D Result=40 13:28:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:02 Get A/D filter: -9.255963e+061 result=40 13:28:02 Get A/D value=-858993460 result=40 13:28:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:02 Parameters OK 13:28:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:02 Set A/D data flow result=40 13:28:02 Set A/D channel type result=40 13:28:02 Set A/D encoding result=40 13:28:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:02 Set channel filter=0.000000e+000 result=40 13:28:02 Config A/D Result=40 13:28:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:02 Get A/D filter: -9.255963e+061 result=40 13:28:02 Get A/D value=-858993460 result=40 13:28:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:02 Aux= 13:28:02 Message to Camera, serial 125291 queued 13:28:39 Received message from Master: op=PointingHead serial=125304 13:28:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:28:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:28:39 Point started: ret=0 13:28:39 point_skyscan result=0 13:28:40 Check angles 13:28:40 SkyScan query 13:28:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 13:28:41 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 13:28:41 Check angles 13:28:41 SkyScan query 13:28:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.31<-14954 Statuses=0008 0009 13:28:41 Msec=750 True Az=112.995 Ze=-44.31 Az status=0008 Ze status=0009 13:28:42 Check angles 13:28:42 SkyScan query 13:28:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 13:28:42 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 13:28:42 Check angles 13:28:42 SkyScan query 13:28:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.64<-17776 Statuses=0008 0009 13:28:43 Msec=2250 True Az=112.995 Ze=-86.64 Az status=0008 Ze status=0009 13:28:43 Check angles 13:28:43 SkyScan query 13:28:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.075<-19205 Statuses=0008 0009 13:28:44 Msec=3000 True Az=112.995 Ze=-108.075 Az status=0008 Ze status=0009 13:28:44 Check angles 13:28:44 SkyScan query 13:28:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-129<-20600 Statuses=0008 0009 13:28:44 Msec=3750 True Az=112.995 Ze=-129 Az status=0008 Ze status=0009 13:28:45 Check angles 13:28:45 SkyScan query 13:28:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.36<-22024 Statuses=0008 0009 13:28:45 Msec=4500 True Az=112.995 Ze=-150.36 Az status=0008 Ze status=0009 13:28:45 Check angles 13:28:45 SkyScan query 13:28:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.45<-23430 Statuses=0008 0009 13:28:46 Msec=5250 True Az=112.995 Ze=-171.45 Az status=0008 Ze status=0009 13:28:46 Check angles 13:28:46 SkyScan query 13:28:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:28:47 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:28:47 Message to Master queued w/err=0: serial=125304 error=0 13:28:52 Received message from Master: op=Filter serial=125305 13:28:52 Color wheel filter change from 0 to 0 13:28:52 FLIGetFilterPos err=0 currentPosition=0 13:28:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:52 Filter is already there-color wheel unchanged 13:28:52 Received message from Master: op=Shutter serial=125306 13:28:52 Shutter LASER open 13:28:52 Received message from Camera: op=State serial=125308 13:28:52 GetSingleValue result=40 Value=cccccccc 13:28:52 SkyScan query 13:28:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:28:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:53 Parameters OK 13:28:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:53 Set A/D data flow result=40 13:28:53 Set A/D channel type result=40 13:28:53 Set A/D encoding result=40 13:28:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:53 Set channel filter=0.000000e+000 result=40 13:28:53 Config A/D Result=40 13:28:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:53 Get A/D filter: -9.255963e+061 result=40 13:28:53 Get A/D value=-858993460 result=40 13:28:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:53 Parameters OK 13:28:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:53 Set A/D data flow result=40 13:28:53 Set A/D channel type result=40 13:28:53 Set A/D encoding result=40 13:28:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:53 Set channel filter=0.000000e+000 result=40 13:28:53 Config A/D Result=40 13:28:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:53 Get A/D filter: -9.255963e+061 result=40 13:28:53 Get A/D value=-858993460 result=40 13:28:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:53 Aux= 13:28:53 Message to Camera, serial 125308 queued 13:29:01 Received message from Master: op=Shutter serial=125318 13:29:01 Shutter LASER close 13:29:02 Received message from Master: op=PointingHead serial=125322 13:29:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:29:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:29:02 Point started: ret=0 13:29:02 point_skyscan result=0 13:29:03 Check angles 13:29:03 SkyScan query 13:29:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 13:29:03 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 13:29:04 Check angles 13:29:04 SkyScan query 13:29:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 13:29:04 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 13:29:04 Check angles 13:29:04 SkyScan query 13:29:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.395<-18693 Statuses=0008 0009 13:29:05 Msec=1500 True Az=112.995 Ze=-100.395 Az status=0008 Ze status=0009 13:29:05 Check angles 13:29:05 SkyScan query 13:29:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.44<-17296 Statuses=0008 0009 13:29:06 Msec=2250 True Az=112.995 Ze=-79.44 Az status=0008 Ze status=0009 13:29:06 Check angles 13:29:06 SkyScan query 13:29:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.485<-15899 Statuses=0008 0009 13:29:06 Msec=3000 True Az=112.995 Ze=-58.485 Az status=0008 Ze status=0009 13:29:07 Check angles 13:29:07 SkyScan query 13:29:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.56<-14504 Statuses=0008 0009 13:29:07 Msec=3750 True Az=112.995 Ze=-37.56 Az status=0008 Ze status=0009 13:29:07 Check angles 13:29:07 SkyScan query 13:29:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.59<-13106 Statuses=0008 0009 13:29:08 Msec=4500 True Az=112.995 Ze=-16.59 Az status=0008 Ze status=0009 13:29:08 Check angles 13:29:08 SkyScan query 13:29:09 SkyScan query done: ret=0 az=112.995<-7533 ze=4.575<-11695 Statuses=0008 0009 13:29:09 Msec=5250 True Az=112.995 Ze=4.575 Az status=0008 Ze status=0009 13:29:09 Check angles 13:29:09 SkyScan query 13:29:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:29:09 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:29:09 Message to Master queued w/err=0: serial=125322 error=0 13:29:14 Received message from Master: op=Filter serial=125323 13:29:14 Color wheel filter change from 0 to 0 13:29:14 FLIGetFilterPos err=0 currentPosition=0 13:29:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:29:14 Filter is already there-color wheel unchanged 13:29:15 Received message from Master: op=Shutter serial=125324 13:29:15 Shutter LASER close 13:29:15 Received message from Camera: op=State serial=125326 13:29:15 GetSingleValue result=40 Value=cccccccc 13:29:15 SkyScan query 13:29:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:29:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:15 Parameters OK 13:29:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:15 Set A/D data flow result=40 13:29:15 Set A/D channel type result=40 13:29:15 Set A/D encoding result=40 13:29:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:15 Set channel filter=0.000000e+000 result=40 13:29:15 Config A/D Result=40 13:29:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:15 Get A/D filter: -9.255963e+061 result=40 13:29:15 Get A/D value=-858993460 result=40 13:29:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:15 Parameters OK 13:29:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:15 Set A/D data flow result=40 13:29:15 Set A/D channel type result=40 13:29:15 Set A/D encoding result=40 13:29:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:15 Set channel filter=0.000000e+000 result=40 13:29:15 Config A/D Result=40 13:29:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:15 Get A/D filter: -9.255963e+061 result=40 13:29:15 Get A/D value=-858993460 result=40 13:29:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:29:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:29:15 Aux= 13:29:15 Message to Camera, serial 125326 queued 13:29:52 Received message from Master: op=PointingHead serial=125339 13:29:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:29:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:29:53 Point started: ret=0 13:29:53 point_skyscan result=0 13:29:53 Check angles 13:29:53 SkyScan query 13:29:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:29:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:29:54 Message to Master queued w/err=0: serial=125339 error=0 13:29:59 Received message from Master: op=Filter serial=125340 13:29:59 Color wheel filter change from 0 to 0 13:29:59 FLIGetFilterPos err=0 currentPosition=0 13:29:59 FLIGetStepsRemaining err=0 RemainingSteps=0 13:29:59 Filter is already there-color wheel unchanged 13:29:59 Received message from Master: op=Shutter serial=125341 13:29:59 Shutter LASER close 13:29:59 Received message from Camera: op=State serial=125343 13:29:59 GetSingleValue result=40 Value=cccccccc 13:29:59 SkyScan query 13:30:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:30:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:00 Parameters OK 13:30:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:00 Set A/D data flow result=40 13:30:00 Set A/D channel type result=40 13:30:00 Set A/D encoding result=40 13:30:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:00 Set channel filter=0.000000e+000 result=40 13:30:00 Config A/D Result=40 13:30:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:00 Get A/D filter: -9.255963e+061 result=40 13:30:00 Get A/D value=-858993460 result=40 13:30:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:00 Parameters OK 13:30:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:00 Set A/D data flow result=40 13:30:00 Set A/D channel type result=40 13:30:00 Set A/D encoding result=40 13:30:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:00 Set channel filter=0.000000e+000 result=40 13:30:00 Config A/D Result=40 13:30:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:00 Get A/D filter: -9.255963e+061 result=40 13:30:00 Get A/D value=-858993460 result=40 13:30:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:30:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:30:00 Aux= 13:30:00 Message to Camera, serial 125343 queued 13:30:36 Received message from Master: op=PointingHead serial=125355 13:30:36 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:30:36 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:30:36 Point started: ret=0 13:30:36 point_skyscan result=0 13:30:37 Check angles 13:30:37 SkyScan query 13:30:37 SkyScan query done: ret=0 az=135.645<-9043 ze=-6.51<-12434 Statuses=0009 0008 13:30:37 Msec=0 True Az=135.645 Ze=-6.51 Az status=0009 Ze status=0008 13:30:37 Check angles 13:30:37 SkyScan query 13:30:38 SkyScan query done: ret=0 az=153.135<-10209 ze=-6.495<-12433 Statuses=0009 0008 13:30:38 Msec=750 True Az=153.135 Ze=-6.495 Az status=0009 Ze status=0008 13:30:38 Check angles 13:30:38 SkyScan query 13:30:39 SkyScan query done: ret=0 az=170.94<-11396 ze=-6.495<-12433 Statuses=0009 0008 13:30:39 Msec=1500 True Az=170.94 Ze=-6.495 Az status=0009 Ze status=0008 13:30:39 Check angles 13:30:39 SkyScan query 13:30:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:30:39 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:30:39 Message to Master queued w/err=0: serial=125355 error=0 13:30:44 Received message from Master: op=Filter serial=125356 13:30:44 Color wheel filter change from 0 to 0 13:30:44 FLIGetFilterPos err=0 currentPosition=0 13:30:44 FLIGetStepsRemaining err=0 RemainingSteps=0 13:30:44 Filter is already there-color wheel unchanged 13:30:45 Received message from Master: op=Shutter serial=125357 13:30:45 Shutter LASER close 13:30:45 Received message from Camera: op=State serial=125359 13:30:45 GetSingleValue result=40 Value=cccccccc 13:30:45 SkyScan query 13:30:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:30:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:45 Parameters OK 13:30:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:45 Set A/D data flow result=40 13:30:45 Set A/D channel type result=40 13:30:45 Set A/D encoding result=40 13:30:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:45 Set channel filter=0.000000e+000 result=40 13:30:45 Config A/D Result=40 13:30:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:45 Get A/D filter: -9.255963e+061 result=40 13:30:45 Get A/D value=-858993460 result=40 13:30:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:45 Parameters OK 13:30:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:45 Set A/D data flow result=40 13:30:45 Set A/D channel type result=40 13:30:45 Set A/D encoding result=40 13:30:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:45 Set channel filter=0.000000e+000 result=40 13:30:45 Config A/D Result=40 13:30:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:45 Get A/D filter: -9.255963e+061 result=40 13:30:45 Get A/D value=-858993460 result=40 13:30:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:30:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:30:45 Aux= 13:30:45 Message to Camera, serial 125359 queued 13:31:22 Received message from Master: op=PointingHead serial=125372 13:31:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:31:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:31:22 Point started: ret=0 13:31:22 point_skyscan result=0 13:31:23 Check angles 13:31:23 SkyScan query 13:31:24 SkyScan query done: ret=0 az=152.61<-10174 ze=6.51<-11566 Statuses=0009 0008 13:31:24 Msec=0 True Az=152.61 Ze=6.51 Az status=0009 Ze status=0008 13:31:24 Check angles 13:31:24 SkyScan query 13:31:24 SkyScan query done: ret=0 az=135.135<-9009 ze=6.495<-11567 Statuses=0009 0008 13:31:24 Msec=750 True Az=135.135 Ze=6.495 Az status=0009 Ze status=0008 13:31:25 Check angles 13:31:25 SkyScan query 13:31:25 SkyScan query done: ret=0 az=117.705<-7847 ze=6.495<-11567 Statuses=0009 0008 13:31:25 Msec=1500 True Az=117.705 Ze=6.495 Az status=0009 Ze status=0008 13:31:25 Check angles 13:31:25 SkyScan query 13:31:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:31:26 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:31:26 Message to Master queued w/err=0: serial=125372 error=0 13:31:31 Received message from Master: op=Filter serial=125373 13:31:31 Color wheel filter change from 0 to 0 13:31:31 FLIGetFilterPos err=0 currentPosition=0 13:31:31 FLIGetStepsRemaining err=0 RemainingSteps=0 13:31:31 Filter is already there-color wheel unchanged 13:31:31 Received message from Master: op=Shutter serial=125374 13:31:31 Shutter LASER close 13:31:31 Received message from Camera: op=State serial=125376 13:31:31 GetSingleValue result=40 Value=cccccccc 13:31:31 SkyScan query 13:31:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:31:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:32 Parameters OK 13:31:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:32 Set A/D data flow result=40 13:31:32 Set A/D channel type result=40 13:31:32 Set A/D encoding result=40 13:31:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:32 Set channel filter=0.000000e+000 result=40 13:31:32 Config A/D Result=40 13:31:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:32 Get A/D filter: -9.255963e+061 result=40 13:31:32 Get A/D value=-858993460 result=40 13:31:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:32 Parameters OK 13:31:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:32 Set A/D data flow result=40 13:31:32 Set A/D channel type result=40 13:31:32 Set A/D encoding result=40 13:31:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:32 Set channel filter=0.000000e+000 result=40 13:31:32 Config A/D Result=40 13:31:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:32 Get A/D filter: -9.255963e+061 result=40 13:31:32 Get A/D value=-858993460 result=40 13:31:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:31:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:31:32 Aux= 13:31:32 Message to Camera, serial 125376 queued 13:32:09 Received message from Master: op=PointingHead serial=125389 13:32:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:32:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:32:09 Point started: ret=0 13:32:09 point_skyscan result=0 13:32:10 Check angles 13:32:10 SkyScan query 13:32:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 13:32:10 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 13:32:10 Check angles 13:32:10 SkyScan query 13:32:11 SkyScan query done: ret=0 az=112.98<-7532 ze=-44.235<-14949 Statuses=0008 0009 13:32:11 Msec=750 True Az=112.98 Ze=-44.235 Az status=0008 Ze status=0009 13:32:11 Check angles 13:32:11 SkyScan query 13:32:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.145<-16343 Statuses=0008 0009 13:32:12 Msec=1500 True Az=112.995 Ze=-65.145 Az status=0008 Ze status=0009 13:32:12 Check angles 13:32:12 SkyScan query 13:32:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.085<-17739 Statuses=0008 0009 13:32:13 Msec=2250 True Az=112.995 Ze=-86.085 Az status=0008 Ze status=0009 13:32:13 Check angles 13:32:13 SkyScan query 13:32:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.025<-19135 Statuses=0008 0009 13:32:13 Msec=3000 True Az=112.995 Ze=-107.025 Az status=0008 Ze status=0009 13:32:13 Check angles 13:32:13 SkyScan query 13:32:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.995<-20533 Statuses=0008 0009 13:32:14 Msec=3750 True Az=112.995 Ze=-127.995 Az status=0008 Ze status=0009 13:32:14 Check angles 13:32:14 SkyScan query 13:32:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.965<-21931 Statuses=0008 0009 13:32:15 Msec=4500 True Az=112.995 Ze=-148.965 Az status=0008 Ze status=0009 13:32:15 Check angles 13:32:15 SkyScan query 13:32:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.92<-23328 Statuses=0008 0009 13:32:16 Msec=5250 True Az=112.995 Ze=-169.92 Az status=0008 Ze status=0009 13:32:16 Check angles 13:32:16 SkyScan query 13:32:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:32:16 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:32:16 Message to Master queued w/err=0: serial=125389 error=0 13:32:21 Received message from Master: op=Filter serial=125390 13:32:21 Color wheel filter change from 0 to 0 13:32:21 FLIGetFilterPos err=0 currentPosition=0 13:32:21 FLIGetStepsRemaining err=0 RemainingSteps=0 13:32:21 Filter is already there-color wheel unchanged 13:32:21 Received message from Master: op=Shutter serial=125391 13:32:21 Shutter LASER open 13:32:22 Received message from Camera: op=State serial=125393 13:32:22 GetSingleValue result=40 Value=cccccccc 13:32:22 SkyScan query 13:32:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:32:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:22 Parameters OK 13:32:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:22 Set A/D data flow result=40 13:32:22 Set A/D channel type result=40 13:32:22 Set A/D encoding result=40 13:32:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:22 Set channel filter=0.000000e+000 result=40 13:32:22 Config A/D Result=40 13:32:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:22 Get A/D filter: -9.255963e+061 result=40 13:32:22 Get A/D value=-858993460 result=40 13:32:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:22 Parameters OK 13:32:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:22 Set A/D data flow result=40 13:32:22 Set A/D channel type result=40 13:32:22 Set A/D encoding result=40 13:32:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:22 Set channel filter=0.000000e+000 result=40 13:32:22 Config A/D Result=40 13:32:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:22 Get A/D filter: -9.255963e+061 result=40 13:32:22 Get A/D value=-858993460 result=40 13:32:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:32:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:32:22 Aux= 13:32:22 Message to Camera, serial 125393 queued 13:32:31 Received message from Master: op=Shutter serial=125403 13:32:31 Shutter LASER close 13:32:31 Received message from Master: op=PointingHead serial=125407 13:32:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:32:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:32:31 Point started: ret=0 13:32:31 point_skyscan result=0 13:32:32 Check angles 13:32:32 SkyScan query 13:32:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 13:32:33 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 13:32:33 Check angles 13:32:33 SkyScan query 13:32:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 13:32:34 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 13:32:34 Check angles 13:32:34 SkyScan query 13:32:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.65<-18710 Statuses=0008 0009 13:32:34 Msec=1500 True Az=112.995 Ze=-100.65 Az status=0008 Ze status=0009 13:32:34 Check angles 13:32:34 SkyScan query 13:32:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.68<-17312 Statuses=0008 0009 13:32:35 Msec=2250 True Az=112.995 Ze=-79.68 Az status=0008 Ze status=0009 13:32:35 Check angles 13:32:35 SkyScan query 13:32:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.74<-15916 Statuses=0008 0009 13:32:36 Msec=3000 True Az=112.995 Ze=-58.74 Az status=0008 Ze status=0009 13:32:36 Check angles 13:32:36 SkyScan query 13:32:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.725<-14515 Statuses=0008 0009 13:32:37 Msec=3750 True Az=112.995 Ze=-37.725 Az status=0008 Ze status=0009 13:32:37 Check angles 13:32:37 SkyScan query 13:32:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.785<-13119 Statuses=0008 0009 13:32:37 Msec=4500 True Az=112.995 Ze=-16.785 Az status=0008 Ze status=0009 13:32:37 Check angles 13:32:37 SkyScan query 13:32:38 SkyScan query done: ret=0 az=113.01<-7534 ze=4.44<-11704 Statuses=0008 0009 13:32:38 Msec=5250 True Az=113.01 Ze=4.44 Az status=0008 Ze status=0009 13:32:38 Check angles 13:32:38 SkyScan query 13:32:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:32:39 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:32:39 Message to Master queued w/err=0: serial=125407 error=0 13:32:44 Received message from Master: op=Filter serial=125408 13:32:44 Color wheel filter change from 0 to 0 13:32:44 FLIGetFilterPos err=0 currentPosition=0 13:32:44 FLIGetStepsRemaining err=0 RemainingSteps=0 13:32:44 Filter is already there-color wheel unchanged 13:32:44 Received message from Master: op=Shutter serial=125409 13:32:44 Shutter LASER close 13:32:44 Received message from Camera: op=State serial=125411 13:32:44 GetSingleValue result=40 Value=cccccccc 13:32:44 SkyScan query 13:32:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:32:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:45 Parameters OK 13:32:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:45 Set A/D data flow result=40 13:32:45 Set A/D channel type result=40 13:32:45 Set A/D encoding result=40 13:32:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:45 Set channel filter=0.000000e+000 result=40 13:32:45 Config A/D Result=40 13:32:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:45 Get A/D filter: -9.255963e+061 result=40 13:32:45 Get A/D value=-858993460 result=40 13:32:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:45 Parameters OK 13:32:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:45 Set A/D data flow result=40 13:32:45 Set A/D channel type result=40 13:32:45 Set A/D encoding result=40 13:32:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:45 Set channel filter=0.000000e+000 result=40 13:32:45 Config A/D Result=40 13:32:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:45 Get A/D filter: -9.255963e+061 result=40 13:32:45 Get A/D value=-858993460 result=40 13:32:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:32:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:32:45 Aux= 13:32:45 Message to Camera, serial 125411 queued 13:33:22 Received message from Master: op=PointingHead serial=125424 13:33:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:33:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:33:22 Point started: ret=0 13:33:22 point_skyscan result=0 13:33:23 Check angles 13:33:23 SkyScan query 13:33:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:33:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:33:23 Message to Master queued w/err=0: serial=125424 error=0 13:33:28 Received message from Master: op=Filter serial=125425 13:33:28 Color wheel filter change from 0 to 0 13:33:28 FLIGetFilterPos err=0 currentPosition=0 13:33:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:33:28 Filter is already there-color wheel unchanged 13:33:28 Received message from Master: op=Shutter serial=125426 13:33:28 Shutter LASER close 13:33:28 Received message from Camera: op=State serial=125428 13:33:28 GetSingleValue result=40 Value=cccccccc 13:33:28 SkyScan query 13:33:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:33:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:29 Parameters OK 13:33:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:29 Set A/D data flow result=40 13:33:29 Set A/D channel type result=40 13:33:29 Set A/D encoding result=40 13:33:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:29 Set channel filter=0.000000e+000 result=40 13:33:29 Config A/D Result=40 13:33:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:29 Get A/D filter: -9.255963e+061 result=40 13:33:29 Get A/D value=-858993460 result=40 13:33:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:29 Parameters OK 13:33:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:29 Set A/D data flow result=40 13:33:29 Set A/D channel type result=40 13:33:29 Set A/D encoding result=40 13:33:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:29 Set channel filter=0.000000e+000 result=40 13:33:29 Config A/D Result=40 13:33:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:29 Get A/D filter: -9.255963e+061 result=40 13:33:29 Get A/D value=-858993460 result=40 13:33:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:33:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:33:29 Aux= 13:33:29 Message to Camera, serial 125428 queued 13:33:38 Received message from Master: op=Identify serial=125429 13:34:06 Received message from Master: op=PointingHead serial=125444 13:34:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:34:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:34:06 Point started: ret=0 13:34:06 point_skyscan result=0 13:34:07 Check angles 13:34:07 SkyScan query 13:34:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:34:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:34:08 Message to Master queued w/err=0: serial=125444 error=0 13:34:13 Received message from Master: op=Filter serial=125445 13:34:13 Color wheel filter change from 0 to 0 13:34:13 FLIGetFilterPos err=0 currentPosition=0 13:34:13 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:13 Filter is already there-color wheel unchanged 13:34:13 Received message from Master: op=Shutter serial=125446 13:34:13 Shutter LASER close 13:34:13 Received message from Camera: op=State serial=125448 13:34:13 GetSingleValue result=40 Value=cccccccc 13:34:13 SkyScan query 13:34:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:34:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:13 Parameters OK 13:34:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:13 Set A/D data flow result=40 13:34:13 Set A/D channel type result=40 13:34:13 Set A/D encoding result=40 13:34:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:13 Set channel filter=0.000000e+000 result=40 13:34:13 Config A/D Result=40 13:34:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:13 Get A/D filter: -9.255963e+061 result=40 13:34:13 Get A/D value=-858993460 result=40 13:34:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:13 Parameters OK 13:34:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:13 Set A/D data flow result=40 13:34:13 Set A/D channel type result=40 13:34:13 Set A/D encoding result=40 13:34:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:13 Set channel filter=0.000000e+000 result=40 13:34:13 Config A/D Result=40 13:34:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:13 Get A/D filter: -9.255963e+061 result=40 13:34:13 Get A/D value=-858993460 result=40 13:34:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:13 Aux= [UTC 2019-3-5 13:34:13] 13:34:13 Message to Camera, serial 125448 queued 13:34:50 Received message from Master: op=PointingHead serial=125461 13:34:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:34:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:34:50 Point started: ret=0 13:34:50 point_skyscan result=0 13:34:51 Check angles 13:34:51 SkyScan query 13:34:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:34:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:34:52 Message to Master queued w/err=0: serial=125461 error=0 13:34:57 Received message from Master: op=Filter serial=125462 13:34:57 Color wheel filter change from 0 to 0 13:34:57 FLIGetFilterPos err=0 currentPosition=0 13:34:57 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:57 Filter is already there-color wheel unchanged 13:34:57 Received message from Master: op=Shutter serial=125463 13:34:57 Shutter LASER close 13:34:57 Received message from Camera: op=State serial=125465 13:34:57 GetSingleValue result=40 Value=cccccccc 13:34:57 SkyScan query 13:34:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:34:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:58 Parameters OK 13:34:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:58 Set A/D data flow result=40 13:34:58 Set A/D channel type result=40 13:34:58 Set A/D encoding result=40 13:34:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:58 Set channel filter=0.000000e+000 result=40 13:34:58 Config A/D Result=40 13:34:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:58 Get A/D filter: -9.255963e+061 result=40 13:34:58 Get A/D value=-858993460 result=40 13:34:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:58 Parameters OK 13:34:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:58 Set A/D data flow result=40 13:34:58 Set A/D channel type result=40 13:34:58 Set A/D encoding result=40 13:34:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:58 Set channel filter=0.000000e+000 result=40 13:34:58 Config A/D Result=40 13:34:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:58 Get A/D filter: -9.255963e+061 result=40 13:34:58 Get A/D value=-858993460 result=40 13:34:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:58 Aux= 13:34:58 Message to Camera, serial 125465 queued 13:35:33 Received message from Master: op=PointingHead serial=125477 13:35:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:35:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:35:34 Point started: ret=0 13:35:34 point_skyscan result=0 13:35:35 Check angles 13:35:35 SkyScan query 13:35:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.76<-13584 Statuses=0008 0009 13:35:35 Msec=0 True Az=112.995 Ze=-23.76 Az status=0008 Ze status=0009 13:35:35 Check angles 13:35:35 SkyScan query 13:35:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.715<-14981 Statuses=0008 0009 13:35:36 Msec=750 True Az=112.995 Ze=-44.715 Az status=0008 Ze status=0009 13:35:36 Check angles 13:35:36 SkyScan query 13:35:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.655<-16377 Statuses=0008 0009 13:35:37 Msec=1500 True Az=112.995 Ze=-65.655 Az status=0008 Ze status=0009 13:35:37 Check angles 13:35:37 SkyScan query 13:35:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.105<-17807 Statuses=0008 0009 13:35:37 Msec=2250 True Az=112.995 Ze=-87.105 Az status=0008 Ze status=0009 13:35:38 Check angles 13:35:38 SkyScan query 13:35:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.105<-19207 Statuses=0008 0009 13:35:38 Msec=3000 True Az=112.995 Ze=-108.105 Az status=0008 Ze status=0009 13:35:38 Check angles 13:35:38 SkyScan query 13:35:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.985<-20599 Statuses=0008 0009 13:35:39 Msec=3750 True Az=112.995 Ze=-128.985 Az status=0008 Ze status=0009 13:35:39 Check angles 13:35:39 SkyScan query 13:35:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.36<-22024 Statuses=0008 0009 13:35:40 Msec=4500 True Az=112.995 Ze=-150.36 Az status=0008 Ze status=0009 13:35:40 Check angles 13:35:40 SkyScan query 13:35:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.12<-23408 Statuses=0008 0009 13:35:40 Msec=5250 True Az=112.995 Ze=-171.12 Az status=0008 Ze status=0009 13:35:41 Check angles 13:35:41 SkyScan query 13:35:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:35:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:35:41 Message to Master queued w/err=0: serial=125477 error=0 13:35:46 Received message from Master: op=Filter serial=125478 13:35:46 Color wheel filter change from 0 to 0 13:35:46 FLIGetFilterPos err=0 currentPosition=0 13:35:46 FLIGetStepsRemaining err=0 RemainingSteps=0 13:35:46 Filter is already there-color wheel unchanged 13:35:46 Received message from Master: op=Shutter serial=125479 13:35:46 Shutter LASER open 13:35:47 Received message from Camera: op=State serial=125481 13:35:47 GetSingleValue result=40 Value=cccccccc 13:35:47 SkyScan query 13:35:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:35:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:47 Parameters OK 13:35:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:47 Set A/D data flow result=40 13:35:47 Set A/D channel type result=40 13:35:47 Set A/D encoding result=40 13:35:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:47 Set channel filter=0.000000e+000 result=40 13:35:47 Config A/D Result=40 13:35:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:47 Get A/D filter: -9.255963e+061 result=40 13:35:47 Get A/D value=-858993460 result=40 13:35:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:47 Parameters OK 13:35:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:47 Set A/D data flow result=40 13:35:47 Set A/D channel type result=40 13:35:47 Set A/D encoding result=40 13:35:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:47 Set channel filter=0.000000e+000 result=40 13:35:47 Config A/D Result=40 13:35:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:47 Get A/D filter: -9.255963e+061 result=40 13:35:47 Get A/D value=-858993460 result=40 13:35:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:35:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:35:47 Aux= 13:35:47 Message to Camera, serial 125481 queued 13:35:56 Received message from Master: op=Shutter serial=125491 13:35:56 Shutter LASER close 13:35:56 Received message from Master: op=PointingHead serial=125495 13:35:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:35:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:35:56 Point started: ret=0 13:35:56 point_skyscan result=0 13:35:57 Check angles 13:35:57 SkyScan query 13:35:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 13:35:58 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 13:35:58 Check angles 13:35:58 SkyScan query 13:35:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 13:35:59 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 13:35:59 Check angles 13:35:59 SkyScan query 13:35:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 13:35:59 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 13:35:59 Check angles 13:35:59 SkyScan query 13:36:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.16<-17344 Statuses=0008 0009 13:36:00 Msec=2250 True Az=112.995 Ze=-80.16 Az status=0008 Ze status=0009 13:36:00 Check angles 13:36:00 SkyScan query 13:36:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 13:36:01 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 13:36:01 Check angles 13:36:01 SkyScan query 13:36:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.16<-14544 Statuses=0008 0009 13:36:02 Msec=3750 True Az=112.995 Ze=-38.16 Az status=0008 Ze status=0009 13:36:02 Check angles 13:36:02 SkyScan query 13:36:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.235<-13149 Statuses=0008 0009 13:36:02 Msec=4500 True Az=112.995 Ze=-17.235 Az status=0008 Ze status=0009 13:36:02 Check angles 13:36:02 SkyScan query 13:36:03 SkyScan query done: ret=0 az=112.995<-7533 ze=3.75<-11750 Statuses=0008 0009 13:36:03 Msec=5250 True Az=112.995 Ze=3.75 Az status=0008 Ze status=0009 13:36:03 Check angles 13:36:03 SkyScan query 13:36:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:36:04 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:36:04 Message to Master queued w/err=0: serial=125495 error=0 13:36:09 Received message from Master: op=Filter serial=125496 13:36:09 Color wheel filter change from 0 to 0 13:36:09 FLIGetFilterPos err=0 currentPosition=0 13:36:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:09 Filter is already there-color wheel unchanged 13:36:09 Received message from Master: op=Shutter serial=125497 13:36:09 Shutter LASER close 13:36:09 Received message from Camera: op=State serial=125499 13:36:09 GetSingleValue result=40 Value=cccccccc 13:36:09 SkyScan query 13:36:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:36:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:10 Parameters OK 13:36:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:10 Set A/D data flow result=40 13:36:10 Set A/D channel type result=40 13:36:10 Set A/D encoding result=40 13:36:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:10 Set channel filter=0.000000e+000 result=40 13:36:10 Config A/D Result=40 13:36:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:10 Get A/D filter: -9.255963e+061 result=40 13:36:10 Get A/D value=-858993460 result=40 13:36:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:10 Parameters OK 13:36:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:10 Set A/D data flow result=40 13:36:10 Set A/D channel type result=40 13:36:10 Set A/D encoding result=40 13:36:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:10 Set channel filter=0.000000e+000 result=40 13:36:10 Config A/D Result=40 13:36:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:10 Get A/D filter: -9.255963e+061 result=40 13:36:10 Get A/D value=-858993460 result=40 13:36:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:10 Aux= 13:36:10 Message to Camera, serial 125499 queued 13:36:47 Received message from Master: op=PointingHead serial=125512 13:36:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:36:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:36:47 Point started: ret=0 13:36:47 point_skyscan result=0 13:36:48 Check angles 13:36:48 SkyScan query 13:36:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:36:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:36:48 Message to Master queued w/err=0: serial=125512 error=0 13:36:53 Received message from Master: op=Filter serial=125513 13:36:53 Color wheel filter change from 0 to 0 13:36:53 FLIGetFilterPos err=0 currentPosition=0 13:36:53 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:53 Filter is already there-color wheel unchanged 13:36:53 Received message from Master: op=Shutter serial=125514 13:36:53 Shutter LASER close 13:36:53 Received message from Camera: op=State serial=125516 13:36:53 GetSingleValue result=40 Value=cccccccc 13:36:53 SkyScan query 13:36:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:36:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:54 Parameters OK 13:36:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:54 Set A/D data flow result=40 13:36:54 Set A/D channel type result=40 13:36:54 Set A/D encoding result=40 13:36:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:54 Set channel filter=0.000000e+000 result=40 13:36:54 Config A/D Result=40 13:36:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:54 Get A/D filter: -9.255963e+061 result=40 13:36:54 Get A/D value=-858993460 result=40 13:36:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:54 Parameters OK 13:36:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:54 Set A/D data flow result=40 13:36:54 Set A/D channel type result=40 13:36:54 Set A/D encoding result=40 13:36:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:54 Set channel filter=0.000000e+000 result=40 13:36:54 Config A/D Result=40 13:36:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:54 Get A/D filter: -9.255963e+061 result=40 13:36:54 Get A/D value=-858993460 result=40 13:36:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:54 Aux= 13:36:54 Message to Camera, serial 125516 queued 13:37:31 Received message from Master: op=PointingHead serial=125529 13:37:31 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:37:31 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:37:31 Point started: ret=0 13:37:31 point_skyscan result=0 13:37:32 Check angles 13:37:32 SkyScan query 13:37:33 SkyScan query done: ret=0 az=135.945<-9063 ze=-6.51<-12434 Statuses=0009 0008 13:37:33 Msec=0 True Az=135.945 Ze=-6.51 Az status=0009 Ze status=0008 13:37:33 Check angles 13:37:33 SkyScan query 13:37:33 SkyScan query done: ret=0 az=153.75<-10250 ze=-6.495<-12433 Statuses=0009 0008 13:37:33 Msec=750 True Az=153.75 Ze=-6.495 Az status=0009 Ze status=0008 13:37:33 Check angles 13:37:33 SkyScan query 13:37:34 SkyScan query done: ret=0 az=171.375<-11425 ze=-6.495<-12433 Statuses=0009 0008 13:37:34 Msec=1500 True Az=171.375 Ze=-6.495 Az status=0009 Ze status=0008 13:37:34 Check angles 13:37:34 SkyScan query 13:37:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:37:35 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:37:35 Message to Master queued w/err=0: serial=125529 error=0 13:37:40 Received message from Master: op=Filter serial=125530 13:37:40 Color wheel filter change from 0 to 0 13:37:40 FLIGetFilterPos err=0 currentPosition=0 13:37:40 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:40 Filter is already there-color wheel unchanged 13:37:40 Received message from Master: op=Shutter serial=125531 13:37:40 Shutter LASER close 13:37:40 Received message from Camera: op=State serial=125533 13:37:40 GetSingleValue result=40 Value=cccccccc 13:37:40 SkyScan query 13:37:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:37:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:41 Parameters OK 13:37:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:41 Set A/D data flow result=40 13:37:41 Set A/D channel type result=40 13:37:41 Set A/D encoding result=40 13:37:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:41 Set channel filter=0.000000e+000 result=40 13:37:41 Config A/D Result=40 13:37:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:41 Get A/D filter: -9.255963e+061 result=40 13:37:41 Get A/D value=-858993460 result=40 13:37:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:41 Parameters OK 13:37:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:41 Set A/D data flow result=40 13:37:41 Set A/D channel type result=40 13:37:41 Set A/D encoding result=40 13:37:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:41 Set channel filter=0.000000e+000 result=40 13:37:41 Config A/D Result=40 13:37:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:41 Get A/D filter: -9.255963e+061 result=40 13:37:41 Get A/D value=-858993460 result=40 13:37:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:41 Aux= 13:37:41 Message to Camera, serial 125533 queued 13:38:17 Received message from Master: op=PointingHead serial=125546 13:38:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:38:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:38:18 Point started: ret=0 13:38:18 point_skyscan result=0 13:38:18 Check angles 13:38:18 SkyScan query 13:38:19 SkyScan query done: ret=0 az=153.135<-10209 ze=6.51<-11566 Statuses=0009 0008 13:38:19 Msec=0 True Az=153.135 Ze=6.51 Az status=0009 Ze status=0008 13:38:19 Check angles 13:38:19 SkyScan query 13:38:20 SkyScan query done: ret=0 az=135.72<-9048 ze=6.495<-11567 Statuses=0009 0008 13:38:20 Msec=750 True Az=135.72 Ze=6.495 Az status=0009 Ze status=0008 13:38:20 Check angles 13:38:20 SkyScan query 13:38:21 SkyScan query done: ret=0 az=118.17<-7878 ze=6.495<-11567 Statuses=0009 0008 13:38:21 Msec=1500 True Az=118.17 Ze=6.495 Az status=0009 Ze status=0008 13:38:21 Check angles 13:38:21 SkyScan query 13:38:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:38:21 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:38:21 Message to Master queued w/err=0: serial=125546 error=0 13:38:26 Received message from Master: op=Filter serial=125547 13:38:26 Color wheel filter change from 0 to 0 13:38:26 FLIGetFilterPos err=0 currentPosition=0 13:38:26 FLIGetStepsRemaining err=0 RemainingSteps=0 13:38:26 Filter is already there-color wheel unchanged 13:38:26 Received message from Master: op=Shutter serial=125548 13:38:26 Shutter LASER close 13:38:27 Received message from Camera: op=State serial=125550 13:38:27 GetSingleValue result=40 Value=cccccccc 13:38:27 SkyScan query 13:38:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:38:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:27 Parameters OK 13:38:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:27 Set A/D data flow result=40 13:38:27 Set A/D channel type result=40 13:38:27 Set A/D encoding result=40 13:38:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:27 Set channel filter=0.000000e+000 result=40 13:38:27 Config A/D Result=40 13:38:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:27 Get A/D filter: -9.255963e+061 result=40 13:38:27 Get A/D value=-858993460 result=40 13:38:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:27 Parameters OK 13:38:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:27 Set A/D data flow result=40 13:38:27 Set A/D channel type result=40 13:38:27 Set A/D encoding result=40 13:38:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:27 Set channel filter=0.000000e+000 result=40 13:38:27 Config A/D Result=40 13:38:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:27 Get A/D filter: -9.255963e+061 result=40 13:38:27 Get A/D value=-858993460 result=40 13:38:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:38:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:38:27 Aux= 13:38:27 Message to Camera, serial 125550 queued 13:39:03 Received message from Master: op=PointingHead serial=125562 13:39:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:39:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:39:03 Point started: ret=0 13:39:03 point_skyscan result=0 13:39:04 Check angles 13:39:04 SkyScan query 13:39:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.4<-13560 Statuses=0008 0009 13:39:05 Msec=0 True Az=112.995 Ze=-23.4 Az status=0008 Ze status=0009 13:39:05 Check angles 13:39:05 SkyScan query 13:39:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 13:39:05 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 13:39:06 Check angles 13:39:06 SkyScan query 13:39:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.28<-16352 Statuses=0008 0009 13:39:06 Msec=1500 True Az=112.995 Ze=-65.28 Az status=0008 Ze status=0009 13:39:06 Check angles 13:39:06 SkyScan query 13:39:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.235<-17749 Statuses=0008 0009 13:39:07 Msec=2250 True Az=112.995 Ze=-86.235 Az status=0008 Ze status=0009 13:39:07 Check angles 13:39:07 SkyScan query 13:39:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.175<-19145 Statuses=0008 0009 13:39:08 Msec=3000 True Az=112.995 Ze=-107.175 Az status=0008 Ze status=0009 13:39:08 Check angles 13:39:08 SkyScan query 13:39:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.16<-20544 Statuses=0008 0009 13:39:08 Msec=3750 True Az=112.995 Ze=-128.16 Az status=0008 Ze status=0009 13:39:09 Check angles 13:39:09 SkyScan query 13:39:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.145<-21943 Statuses=0008 0009 13:39:09 Msec=4500 True Az=112.995 Ze=-149.145 Az status=0008 Ze status=0009 13:39:09 Check angles 13:39:09 SkyScan query 13:39:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.085<-23339 Statuses=0008 0009 13:39:10 Msec=5250 True Az=112.995 Ze=-170.085 Az status=0008 Ze status=0009 13:39:10 Check angles 13:39:10 SkyScan query 13:39:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:39:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:39:11 Message to Master queued w/err=0: serial=125562 error=0 13:39:16 Received message from Master: op=Filter serial=125563 13:39:16 Color wheel filter change from 0 to 0 13:39:16 FLIGetFilterPos err=0 currentPosition=0 13:39:16 FLIGetStepsRemaining err=0 RemainingSteps=0 13:39:16 Filter is already there-color wheel unchanged 13:39:16 Received message from Master: op=Shutter serial=125564 13:39:16 Shutter LASER open 13:39:16 Received message from Camera: op=State serial=125566 13:39:16 GetSingleValue result=40 Value=cccccccc 13:39:16 SkyScan query 13:39:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:39:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:17 Parameters OK 13:39:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:17 Set A/D data flow result=40 13:39:17 Set A/D channel type result=40 13:39:17 Set A/D encoding result=40 13:39:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:17 Set channel filter=0.000000e+000 result=40 13:39:17 Config A/D Result=40 13:39:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:17 Get A/D filter: -9.255963e+061 result=40 13:39:17 Get A/D value=-858993460 result=40 13:39:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:17 Parameters OK 13:39:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:17 Set A/D data flow result=40 13:39:17 Set A/D channel type result=40 13:39:17 Set A/D encoding result=40 13:39:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:17 Set channel filter=0.000000e+000 result=40 13:39:17 Config A/D Result=40 13:39:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:17 Get A/D filter: -9.255963e+061 result=40 13:39:17 Get A/D value=-858993460 result=40 13:39:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:39:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:39:17 Aux= 13:39:17 Message to Camera, serial 125566 queued 13:39:25 Received message from Master: op=Shutter serial=125576 13:39:25 Shutter LASER close 13:39:26 Received message from Master: op=PointingHead serial=125580 13:39:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:39:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:39:26 Point started: ret=0 13:39:26 point_skyscan result=0 13:39:27 Check angles 13:39:27 SkyScan query 13:39:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 13:39:27 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 13:39:27 Check angles 13:39:27 SkyScan query 13:39:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 13:39:28 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 13:39:28 Check angles 13:39:28 SkyScan query 13:39:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.335<-18689 Statuses=0008 0009 13:39:29 Msec=1500 True Az=112.995 Ze=-100.335 Az status=0008 Ze status=0009 13:39:29 Check angles 13:39:29 SkyScan query 13:39:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.425<-17295 Statuses=0008 0009 13:39:29 Msec=2250 True Az=112.995 Ze=-79.425 Az status=0008 Ze status=0009 13:39:30 Check angles 13:39:30 SkyScan query 13:39:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.485<-15899 Statuses=0008 0009 13:39:30 Msec=3000 True Az=112.995 Ze=-58.485 Az status=0008 Ze status=0009 13:39:30 Check angles 13:39:30 SkyScan query 13:39:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.185<-14479 Statuses=0008 0009 13:39:31 Msec=3750 True Az=112.995 Ze=-37.185 Az status=0008 Ze status=0009 13:39:31 Check angles 13:39:31 SkyScan query 13:39:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.78<-13052 Statuses=0008 0009 13:39:32 Msec=4500 True Az=112.995 Ze=-15.78 Az status=0008 Ze status=0009 13:39:32 Check angles 13:39:32 SkyScan query 13:39:33 SkyScan query done: ret=0 az=112.995<-7533 ze=4.935<-11671 Statuses=0008 0009 13:39:33 Msec=5250 True Az=112.995 Ze=4.935 Az status=0008 Ze status=0009 13:39:33 Check angles 13:39:33 SkyScan query 13:39:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:39:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:39:33 Message to Master queued w/err=0: serial=125580 error=0 13:39:38 Received message from Master: op=Filter serial=125581 13:39:38 Color wheel filter change from 0 to 0 13:39:38 FLIGetFilterPos err=0 currentPosition=0 13:39:38 FLIGetStepsRemaining err=0 RemainingSteps=0 13:39:38 Filter is already there-color wheel unchanged 13:39:38 Received message from Master: op=Shutter serial=125582 13:39:38 Shutter LASER close 13:39:39 Received message from Camera: op=State serial=125584 13:39:39 GetSingleValue result=40 Value=cccccccc 13:39:39 SkyScan query 13:39:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:39:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:39 Parameters OK 13:39:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:39 Set A/D data flow result=40 13:39:39 Set A/D channel type result=40 13:39:39 Set A/D encoding result=40 13:39:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:39 Set channel filter=0.000000e+000 result=40 13:39:39 Config A/D Result=40 13:39:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:39 Get A/D filter: -9.255963e+061 result=40 13:39:39 Get A/D value=-858993460 result=40 13:39:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:39 Parameters OK 13:39:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:39 Set A/D data flow result=40 13:39:39 Set A/D channel type result=40 13:39:39 Set A/D encoding result=40 13:39:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:39 Set channel filter=0.000000e+000 result=40 13:39:39 Config A/D Result=40 13:39:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:39 Get A/D filter: -9.255963e+061 result=40 13:39:39 Get A/D value=-858993460 result=40 13:39:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:39:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:39:39 Aux= 13:39:39 Message to Camera, serial 125584 queued 13:40:16 Received message from Master: op=PointingHead serial=125597 13:40:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:40:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:40:16 Point started: ret=0 13:40:16 point_skyscan result=0 13:40:17 Check angles 13:40:17 SkyScan query 13:40:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:40:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:40:18 Message to Master queued w/err=0: serial=125597 error=0 13:40:23 Received message from Master: op=Filter serial=125598 13:40:23 Color wheel filter change from 0 to 0 13:40:23 FLIGetFilterPos err=0 currentPosition=0 13:40:23 FLIGetStepsRemaining err=0 RemainingSteps=0 13:40:23 Filter is already there-color wheel unchanged 13:40:23 Received message from Master: op=Shutter serial=125599 13:40:23 Shutter LASER close 13:40:23 Received message from Camera: op=State serial=125601 13:40:23 GetSingleValue result=40 Value=cccccccc 13:40:23 SkyScan query 13:40:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:40:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:24 Parameters OK 13:40:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:24 Set A/D data flow result=40 13:40:24 Set A/D channel type result=40 13:40:24 Set A/D encoding result=40 13:40:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:24 Set channel filter=0.000000e+000 result=40 13:40:24 Config A/D Result=40 13:40:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:24 Get A/D filter: -9.255963e+061 result=40 13:40:24 Get A/D value=-858993460 result=40 13:40:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:24 Parameters OK 13:40:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:24 Set A/D data flow result=40 13:40:24 Set A/D channel type result=40 13:40:24 Set A/D encoding result=40 13:40:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:24 Set channel filter=0.000000e+000 result=40 13:40:24 Config A/D Result=40 13:40:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:24 Get A/D filter: -9.255963e+061 result=40 13:40:24 Get A/D value=-858993460 result=40 13:40:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:40:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:40:24 Aux= 13:40:24 Message to Camera, serial 125601 queued 13:41:00 Received message from Master: op=PointingHead serial=125614 13:41:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:41:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:41:01 Point started: ret=0 13:41:01 point_skyscan result=0 13:41:01 Check angles 13:41:01 SkyScan query 13:41:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:41:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:41:02 Message to Master queued w/err=0: serial=125614 error=0 13:41:07 Received message from Master: op=Filter serial=125615 13:41:07 Color wheel filter change from 0 to 0 13:41:07 FLIGetFilterPos err=0 currentPosition=0 13:41:07 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:07 Filter is already there-color wheel unchanged 13:41:07 Received message from Master: op=Shutter serial=125616 13:41:07 Shutter LASER close 13:41:07 Received message from Camera: op=State serial=125618 13:41:07 GetSingleValue result=40 Value=cccccccc 13:41:07 SkyScan query 13:41:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:41:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:08 Parameters OK 13:41:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:08 Set A/D data flow result=40 13:41:08 Set A/D channel type result=40 13:41:08 Set A/D encoding result=40 13:41:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:08 Set channel filter=0.000000e+000 result=40 13:41:08 Config A/D Result=40 13:41:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:08 Get A/D filter: -9.255963e+061 result=40 13:41:08 Get A/D value=-858993460 result=40 13:41:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:08 Parameters OK 13:41:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:08 Set A/D data flow result=40 13:41:08 Set A/D channel type result=40 13:41:08 Set A/D encoding result=40 13:41:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:08 Set channel filter=0.000000e+000 result=40 13:41:08 Config A/D Result=40 13:41:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:08 Get A/D filter: -9.255963e+061 result=40 13:41:08 Get A/D value=-858993460 result=40 13:41:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:08 Aux= 13:41:08 Message to Camera, serial 125618 queued 13:41:45 Received message from Master: op=PointingHead serial=125631 13:41:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:41:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:41:45 Point started: ret=0 13:41:45 point_skyscan result=0 13:41:46 Check angles 13:41:46 SkyScan query 13:41:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:41:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:41:46 Message to Master queued w/err=0: serial=125631 error=0 13:41:51 Received message from Master: op=Filter serial=125632 13:41:51 Color wheel filter change from 0 to 0 13:41:51 FLIGetFilterPos err=0 currentPosition=0 13:41:51 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:51 Filter is already there-color wheel unchanged 13:41:51 Received message from Master: op=Shutter serial=125633 13:41:51 Shutter LASER close 13:41:52 Received message from Camera: op=State serial=125635 13:41:52 GetSingleValue result=40 Value=cccccccc 13:41:52 SkyScan query 13:41:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:41:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:52 Parameters OK 13:41:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:52 Set A/D data flow result=40 13:41:52 Set A/D channel type result=40 13:41:52 Set A/D encoding result=40 13:41:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:52 Set channel filter=0.000000e+000 result=40 13:41:52 Config A/D Result=40 13:41:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:52 Get A/D filter: -9.255963e+061 result=40 13:41:52 Get A/D value=-858993460 result=40 13:41:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:52 Parameters OK 13:41:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:52 Set A/D data flow result=40 13:41:52 Set A/D channel type result=40 13:41:52 Set A/D encoding result=40 13:41:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:52 Set channel filter=0.000000e+000 result=40 13:41:52 Config A/D Result=40 13:41:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:52 Get A/D filter: -9.255963e+061 result=40 13:41:52 Get A/D value=-858993460 result=40 13:41:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:52 Aux= 13:41:52 Message to Camera, serial 125635 queued 13:42:29 Received message from Master: op=PointingHead serial=125648 13:42:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:42:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:42:29 Point started: ret=0 13:42:29 point_skyscan result=0 13:42:30 Check angles 13:42:30 SkyScan query 13:42:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.46<-13564 Statuses=0008 0009 13:42:31 Msec=0 True Az=112.995 Ze=-23.46 Az status=0008 Ze status=0009 13:42:31 Check angles 13:42:31 SkyScan query 13:42:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 13:42:31 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 13:42:32 Check angles 13:42:32 SkyScan query 13:42:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.775<-16385 Statuses=0008 0009 13:42:32 Msec=1500 True Az=112.995 Ze=-65.775 Az status=0008 Ze status=0009 13:42:32 Check angles 13:42:32 SkyScan query 13:42:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.76<-17784 Statuses=0008 0009 13:42:33 Msec=2250 True Az=112.995 Ze=-86.76 Az status=0008 Ze status=0009 13:42:33 Check angles 13:42:33 SkyScan query 13:42:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.715<-19181 Statuses=0008 0009 13:42:34 Msec=3000 True Az=112.995 Ze=-107.715 Az status=0008 Ze status=0009 13:42:34 Check angles 13:42:34 SkyScan query 13:42:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.67<-20578 Statuses=0008 0009 13:42:34 Msec=3750 True Az=112.995 Ze=-128.67 Az status=0008 Ze status=0009 13:42:35 Check angles 13:42:35 SkyScan query 13:42:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.655<-21977 Statuses=0008 0009 13:42:35 Msec=4500 True Az=112.995 Ze=-149.655 Az status=0008 Ze status=0009 13:42:35 Check angles 13:42:35 SkyScan query 13:42:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.91<-23394 Statuses=0008 0009 13:42:36 Msec=5250 True Az=112.995 Ze=-170.91 Az status=0008 Ze status=0009 13:42:36 Check angles 13:42:36 SkyScan query 13:42:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:42:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:42:37 Message to Master queued w/err=0: serial=125648 error=0 13:42:42 Received message from Master: op=Filter serial=125649 13:42:42 Color wheel filter change from 0 to 0 13:42:42 FLIGetFilterPos err=0 currentPosition=0 13:42:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:42:42 Filter is already there-color wheel unchanged 13:42:42 Received message from Master: op=Shutter serial=125650 13:42:42 Shutter LASER open 13:42:42 Received message from Camera: op=State serial=125652 13:42:42 GetSingleValue result=40 Value=cccccccc 13:42:42 SkyScan query 13:42:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:42:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:43 Parameters OK 13:42:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:43 Set A/D data flow result=40 13:42:43 Set A/D channel type result=40 13:42:43 Set A/D encoding result=40 13:42:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:43 Set channel filter=0.000000e+000 result=40 13:42:43 Config A/D Result=40 13:42:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:43 Get A/D filter: -9.255963e+061 result=40 13:42:43 Get A/D value=-858993460 result=40 13:42:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:43 Parameters OK 13:42:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:43 Set A/D data flow result=40 13:42:43 Set A/D channel type result=40 13:42:43 Set A/D encoding result=40 13:42:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:43 Set channel filter=0.000000e+000 result=40 13:42:43 Config A/D Result=40 13:42:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:43 Get A/D filter: -9.255963e+061 result=40 13:42:43 Get A/D value=-858993460 result=40 13:42:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:42:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:42:43 Aux= 13:42:43 Message to Camera, serial 125652 queued 13:42:51 Received message from Master: op=Shutter serial=125662 13:42:51 Shutter LASER close 13:42:52 Received message from Master: op=PointingHead serial=125666 13:42:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:42:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:42:52 Point started: ret=0 13:42:52 point_skyscan result=0 13:42:53 Check angles 13:42:53 SkyScan query 13:42:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 13:42:53 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 13:42:53 Check angles 13:42:53 SkyScan query 13:42:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.755<-20117 Statuses=0008 0009 13:42:54 Msec=750 True Az=112.995 Ze=-121.755 Az status=0008 Ze status=0009 13:42:54 Check angles 13:42:54 SkyScan query 13:42:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.335<-18689 Statuses=0008 0009 13:42:55 Msec=1500 True Az=112.995 Ze=-100.335 Az status=0008 Ze status=0009 13:42:55 Check angles 13:42:55 SkyScan query 13:42:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-78.975<-17265 Statuses=0008 0009 13:42:56 Msec=2250 True Az=112.995 Ze=-78.975 Az status=0008 Ze status=0009 13:42:56 Check angles 13:42:56 SkyScan query 13:42:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.035<-15869 Statuses=0008 0009 13:42:56 Msec=3000 True Az=112.995 Ze=-58.035 Az status=0008 Ze status=0009 13:42:56 Check angles 13:42:56 SkyScan query 13:42:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.155<-14477 Statuses=0008 0009 13:42:57 Msec=3750 True Az=112.995 Ze=-37.155 Az status=0008 Ze status=0009 13:42:57 Check angles 13:42:57 SkyScan query 13:42:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.155<-13077 Statuses=0008 0009 13:42:58 Msec=4500 True Az=112.995 Ze=-16.155 Az status=0008 Ze status=0009 13:42:58 Check angles 13:42:58 SkyScan query 13:42:59 SkyScan query done: ret=0 az=112.995<-7533 ze=4.62<-11692 Statuses=0008 0009 13:42:59 Msec=5250 True Az=112.995 Ze=4.62 Az status=0008 Ze status=0009 13:42:59 Check angles 13:42:59 SkyScan query 13:42:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:42:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:42:59 Message to Master queued w/err=0: serial=125666 error=0 13:43:04 Received message from Master: op=Filter serial=125667 13:43:04 Color wheel filter change from 0 to 0 13:43:04 FLIGetFilterPos err=0 currentPosition=0 13:43:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:04 Filter is already there-color wheel unchanged 13:43:04 Received message from Master: op=Shutter serial=125668 13:43:04 Shutter LASER close 13:43:05 Received message from Camera: op=State serial=125670 13:43:05 GetSingleValue result=40 Value=cccccccc 13:43:05 SkyScan query 13:43:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:43:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:05 Parameters OK 13:43:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:05 Set A/D data flow result=40 13:43:05 Set A/D channel type result=40 13:43:05 Set A/D encoding result=40 13:43:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:05 Set channel filter=0.000000e+000 result=40 13:43:05 Config A/D Result=40 13:43:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:05 Get A/D filter: -9.255963e+061 result=40 13:43:05 Get A/D value=-858993460 result=40 13:43:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:05 Parameters OK 13:43:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:05 Set A/D data flow result=40 13:43:05 Set A/D channel type result=40 13:43:05 Set A/D encoding result=40 13:43:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:05 Set channel filter=0.000000e+000 result=40 13:43:05 Config A/D Result=40 13:43:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:05 Get A/D filter: -9.255963e+061 result=40 13:43:05 Get A/D value=-858993460 result=40 13:43:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:05 Aux= 13:43:05 Message to Camera, serial 125670 queued 13:43:42 Received message from Master: op=PointingHead serial=125683 13:43:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:43:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:43:42 Point started: ret=0 13:43:42 point_skyscan result=0 13:43:43 Check angles 13:43:43 SkyScan query 13:43:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:43:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:43:44 Message to Master queued w/err=0: serial=125683 error=0 13:43:49 Received message from Master: op=Filter serial=125684 13:43:49 Color wheel filter change from 0 to 0 13:43:49 FLIGetFilterPos err=0 currentPosition=0 13:43:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:49 Filter is already there-color wheel unchanged 13:43:49 Received message from Master: op=Shutter serial=125685 13:43:49 Shutter LASER close 13:43:49 Received message from Camera: op=State serial=125687 13:43:49 GetSingleValue result=40 Value=cccccccc 13:43:49 SkyScan query 13:43:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:43:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:50 Parameters OK 13:43:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:50 Set A/D data flow result=40 13:43:50 Set A/D channel type result=40 13:43:50 Set A/D encoding result=40 13:43:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:50 Set channel filter=0.000000e+000 result=40 13:43:50 Config A/D Result=40 13:43:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:50 Get A/D filter: -9.255963e+061 result=40 13:43:50 Get A/D value=-858993460 result=40 13:43:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:50 Parameters OK 13:43:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:50 Set A/D data flow result=40 13:43:50 Set A/D channel type result=40 13:43:50 Set A/D encoding result=40 13:43:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:50 Set channel filter=0.000000e+000 result=40 13:43:50 Config A/D Result=40 13:43:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:50 Get A/D filter: -9.255963e+061 result=40 13:43:50 Get A/D value=-858993460 result=40 13:43:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:50 Aux= 13:43:50 Message to Camera, serial 125687 queued [UTC 2019-3-5 13:43:50] 13:44:25 Received message from Master: op=PointingHead serial=125699 13:44:25 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:44:25 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:44:26 Point started: ret=0 13:44:26 point_skyscan result=0 13:44:27 Check angles 13:44:27 SkyScan query 13:44:27 SkyScan query done: ret=0 az=135.975<-9065 ze=-6.51<-12434 Statuses=0009 0008 13:44:27 Msec=0 True Az=135.975 Ze=-6.51 Az status=0009 Ze status=0008 13:44:27 Check angles 13:44:27 SkyScan query 13:44:28 SkyScan query done: ret=0 az=153.915<-10261 ze=-6.495<-12433 Statuses=0009 0008 13:44:28 Msec=750 True Az=153.915 Ze=-6.495 Az status=0009 Ze status=0008 13:44:28 Check angles 13:44:28 SkyScan query 13:44:29 SkyScan query done: ret=0 az=171.63<-11442 ze=-6.495<-12433 Statuses=0009 0008 13:44:29 Msec=1500 True Az=171.63 Ze=-6.495 Az status=0009 Ze status=0008 13:44:29 Check angles 13:44:29 SkyScan query 13:44:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:44:29 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:44:29 Message to Master queued w/err=0: serial=125699 error=0 13:44:34 Received message from Master: op=Filter serial=125700 13:44:34 Color wheel filter change from 0 to 0 13:44:34 FLIGetFilterPos err=0 currentPosition=0 13:44:34 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:34 Filter is already there-color wheel unchanged 13:44:35 Received message from Master: op=Shutter serial=125701 13:44:35 Shutter LASER close 13:44:35 Received message from Camera: op=State serial=125703 13:44:35 GetSingleValue result=40 Value=cccccccc 13:44:35 SkyScan query 13:44:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:44:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:35 Parameters OK 13:44:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:35 Set A/D data flow result=40 13:44:35 Set A/D channel type result=40 13:44:35 Set A/D encoding result=40 13:44:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:35 Set channel filter=0.000000e+000 result=40 13:44:35 Config A/D Result=40 13:44:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:35 Get A/D filter: -9.255963e+061 result=40 13:44:35 Get A/D value=-858993460 result=40 13:44:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:35 Parameters OK 13:44:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:35 Set A/D data flow result=40 13:44:35 Set A/D channel type result=40 13:44:35 Set A/D encoding result=40 13:44:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:35 Set channel filter=0.000000e+000 result=40 13:44:35 Config A/D Result=40 13:44:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:35 Get A/D filter: -9.255963e+061 result=40 13:44:35 Get A/D value=-858993460 result=40 13:44:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:35 Aux= 13:44:35 Message to Camera, serial 125703 queued 13:45:12 Received message from Master: op=PointingHead serial=125716 13:45:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:45:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:45:12 Point started: ret=0 13:45:12 point_skyscan result=0 13:45:13 Check angles 13:45:13 SkyScan query 13:45:14 SkyScan query done: ret=0 az=153<-10200 ze=6.51<-11566 Statuses=0009 0008 13:45:14 Msec=0 True Az=153 Ze=6.51 Az status=0009 Ze status=0008 13:45:14 Check angles 13:45:14 SkyScan query 13:45:14 SkyScan query done: ret=0 az=135.495<-9033 ze=6.495<-11567 Statuses=0009 0008 13:45:14 Msec=750 True Az=135.495 Ze=6.495 Az status=0009 Ze status=0008 13:45:15 Check angles 13:45:15 SkyScan query 13:45:15 SkyScan query done: ret=0 az=118.035<-7869 ze=6.495<-11567 Statuses=0009 0008 13:45:15 Msec=1500 True Az=118.035 Ze=6.495 Az status=0009 Ze status=0008 13:45:15 Check angles 13:45:15 SkyScan query 13:45:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:45:16 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:45:16 Message to Master queued w/err=0: serial=125716 error=0 13:45:21 Received message from Master: op=Filter serial=125717 13:45:21 Color wheel filter change from 0 to 0 13:45:21 FLIGetFilterPos err=0 currentPosition=0 13:45:21 FLIGetStepsRemaining err=0 RemainingSteps=0 13:45:21 Filter is already there-color wheel unchanged 13:45:21 Received message from Master: op=Shutter serial=125718 13:45:21 Shutter LASER close 13:45:21 Received message from Camera: op=State serial=125720 13:45:21 GetSingleValue result=40 Value=cccccccc 13:45:21 SkyScan query 13:45:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:45:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:22 Parameters OK 13:45:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:22 Set A/D data flow result=40 13:45:22 Set A/D channel type result=40 13:45:22 Set A/D encoding result=40 13:45:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:22 Set channel filter=0.000000e+000 result=40 13:45:22 Config A/D Result=40 13:45:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:22 Get A/D filter: -9.255963e+061 result=40 13:45:22 Get A/D value=-858993460 result=40 13:45:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:22 Parameters OK 13:45:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:22 Set A/D data flow result=40 13:45:22 Set A/D channel type result=40 13:45:22 Set A/D encoding result=40 13:45:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:22 Set channel filter=0.000000e+000 result=40 13:45:22 Config A/D Result=40 13:45:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:22 Get A/D filter: -9.255963e+061 result=40 13:45:22 Get A/D value=-858993460 result=40 13:45:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:45:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:45:22 Aux= 13:45:22 Message to Camera, serial 125720 queued 13:45:59 Received message from Master: op=PointingHead serial=125733 13:45:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:45:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:45:59 Point started: ret=0 13:45:59 point_skyscan result=0 13:46:00 Check angles 13:46:00 SkyScan query 13:46:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 13:46:00 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 13:46:00 Check angles 13:46:00 SkyScan query 13:46:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 13:46:01 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 13:46:01 Check angles 13:46:01 SkyScan query 13:46:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.355<-16357 Statuses=0008 0009 13:46:02 Msec=1500 True Az=112.995 Ze=-65.355 Az status=0008 Ze status=0009 13:46:02 Check angles 13:46:02 SkyScan query 13:46:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.79<-17786 Statuses=0008 0009 13:46:02 Msec=2250 True Az=112.995 Ze=-86.79 Az status=0008 Ze status=0009 13:46:03 Check angles 13:46:03 SkyScan query 13:46:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 13:46:03 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 13:46:03 Check angles 13:46:03 SkyScan query 13:46:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.73<-20582 Statuses=0008 0009 13:46:04 Msec=3750 True Az=112.995 Ze=-128.73 Az status=0008 Ze status=0009 13:46:04 Check angles 13:46:04 SkyScan query 13:46:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 13:46:05 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 13:46:05 Check angles 13:46:05 SkyScan query 13:46:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.625<-23375 Statuses=0008 0009 13:46:05 Msec=5250 True Az=112.995 Ze=-170.625 Az status=0008 Ze status=0009 13:46:06 Check angles 13:46:06 SkyScan query 13:46:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:46:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:46:06 Message to Master queued w/err=0: serial=125733 error=0 13:46:11 Received message from Master: op=Filter serial=125734 13:46:11 Color wheel filter change from 0 to 0 13:46:11 FLIGetFilterPos err=0 currentPosition=0 13:46:11 FLIGetStepsRemaining err=0 RemainingSteps=0 13:46:11 Filter is already there-color wheel unchanged 13:46:11 Received message from Master: op=Shutter serial=125735 13:46:11 Shutter LASER open 13:46:12 Received message from Camera: op=State serial=125737 13:46:12 GetSingleValue result=40 Value=cccccccc 13:46:12 SkyScan query 13:46:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:46:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:12 Parameters OK 13:46:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:12 Set A/D data flow result=40 13:46:12 Set A/D channel type result=40 13:46:12 Set A/D encoding result=40 13:46:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:12 Set channel filter=0.000000e+000 result=40 13:46:12 Config A/D Result=40 13:46:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:12 Get A/D filter: -9.255963e+061 result=40 13:46:12 Get A/D value=-858993460 result=40 13:46:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:12 Parameters OK 13:46:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:12 Set A/D data flow result=40 13:46:12 Set A/D channel type result=40 13:46:12 Set A/D encoding result=40 13:46:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:12 Set channel filter=0.000000e+000 result=40 13:46:12 Config A/D Result=40 13:46:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:12 Get A/D filter: -9.255963e+061 result=40 13:46:12 Get A/D value=-858993460 result=40 13:46:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:46:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:46:12 Aux= 13:46:12 Message to Camera, serial 125737 queued 13:46:21 Received message from Master: op=Shutter serial=125747 13:46:21 Shutter LASER close 13:46:21 Received message from Master: op=PointingHead serial=125751 13:46:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:46:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:46:21 Point started: ret=0 13:46:21 point_skyscan result=0 13:46:22 Check angles 13:46:22 SkyScan query 13:46:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 13:46:23 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 13:46:23 Check angles 13:46:23 SkyScan query 13:46:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.475<-20165 Statuses=0008 0009 13:46:23 Msec=750 True Az=112.995 Ze=-122.475 Az status=0008 Ze status=0009 13:46:24 Check angles 13:46:24 SkyScan query 13:46:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.535<-18769 Statuses=0008 0009 13:46:24 Msec=1500 True Az=112.995 Ze=-101.535 Az status=0008 Ze status=0009 13:46:24 Check angles 13:46:24 SkyScan query 13:46:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.565<-17371 Statuses=0008 0009 13:46:25 Msec=2250 True Az=112.995 Ze=-80.565 Az status=0008 Ze status=0009 13:46:25 Check angles 13:46:25 SkyScan query 13:46:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.625<-15975 Statuses=0008 0009 13:46:26 Msec=3000 True Az=112.995 Ze=-59.625 Az status=0008 Ze status=0009 13:46:26 Check angles 13:46:26 SkyScan query 13:46:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.64<-14576 Statuses=0008 0009 13:46:26 Msec=3750 True Az=112.995 Ze=-38.64 Az status=0008 Ze status=0009 13:46:27 Check angles 13:46:27 SkyScan query 13:46:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.7<-13180 Statuses=0008 0009 13:46:27 Msec=4500 True Az=112.995 Ze=-17.7 Az status=0008 Ze status=0009 13:46:27 Check angles 13:46:27 SkyScan query 13:46:28 SkyScan query done: ret=0 az=112.98<-7532 ze=3.285<-11781 Statuses=0008 0009 13:46:28 Msec=5250 True Az=112.98 Ze=3.285 Az status=0008 Ze status=0009 13:46:28 Check angles 13:46:28 SkyScan query 13:46:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:46:29 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:46:29 Message to Master queued w/err=0: serial=125751 error=0 13:46:34 Received message from Master: op=Filter serial=125752 13:46:34 Color wheel filter change from 0 to 0 13:46:34 FLIGetFilterPos err=0 currentPosition=0 13:46:34 FLIGetStepsRemaining err=0 RemainingSteps=0 13:46:34 Filter is already there-color wheel unchanged 13:46:34 Received message from Master: op=Shutter serial=125753 13:46:34 Shutter LASER close 13:46:34 Received message from Camera: op=State serial=125755 13:46:34 GetSingleValue result=40 Value=cccccccc 13:46:34 SkyScan query 13:46:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:46:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:35 Parameters OK 13:46:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:35 Set A/D data flow result=40 13:46:35 Set A/D channel type result=40 13:46:35 Set A/D encoding result=40 13:46:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:35 Set channel filter=0.000000e+000 result=40 13:46:35 Config A/D Result=40 13:46:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:35 Get A/D filter: -9.255963e+061 result=40 13:46:35 Get A/D value=-858993460 result=40 13:46:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:35 Parameters OK 13:46:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:35 Set A/D data flow result=40 13:46:35 Set A/D channel type result=40 13:46:35 Set A/D encoding result=40 13:46:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:35 Set channel filter=0.000000e+000 result=40 13:46:35 Config A/D Result=40 13:46:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:35 Get A/D filter: -9.255963e+061 result=40 13:46:35 Get A/D value=-858993460 result=40 13:46:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:46:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:46:35 Aux= 13:46:35 Message to Camera, serial 125755 queued 13:47:11 Received message from Master: op=PointingHead serial=125768 13:47:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:47:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:47:12 Point started: ret=0 13:47:12 point_skyscan result=0 13:47:13 Check angles 13:47:13 SkyScan query 13:47:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:47:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:47:13 Message to Master queued w/err=0: serial=125768 error=0 13:47:18 Received message from Master: op=Filter serial=125769 13:47:18 Color wheel filter change from 0 to 0 13:47:18 FLIGetFilterPos err=0 currentPosition=0 13:47:18 FLIGetStepsRemaining err=0 RemainingSteps=0 13:47:18 Filter is already there-color wheel unchanged 13:47:18 Received message from Master: op=Shutter serial=125770 13:47:18 Shutter LASER close 13:47:18 Received message from Camera: op=State serial=125772 13:47:18 GetSingleValue result=40 Value=cccccccc 13:47:18 SkyScan query 13:47:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:47:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:19 Parameters OK 13:47:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:19 Set A/D data flow result=40 13:47:19 Set A/D channel type result=40 13:47:19 Set A/D encoding result=40 13:47:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:19 Set channel filter=0.000000e+000 result=40 13:47:19 Config A/D Result=40 13:47:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:19 Get A/D filter: -9.255963e+061 result=40 13:47:19 Get A/D value=-858993460 result=40 13:47:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:19 Parameters OK 13:47:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:19 Set A/D data flow result=40 13:47:19 Set A/D channel type result=40 13:47:19 Set A/D encoding result=40 13:47:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:19 Set channel filter=0.000000e+000 result=40 13:47:19 Config A/D Result=40 13:47:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:19 Get A/D filter: -9.255963e+061 result=40 13:47:19 Get A/D value=-858993460 result=40 13:47:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:47:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:47:19 Aux= 13:47:19 Message to Camera, serial 125772 queued 13:47:56 Received message from Master: op=PointingHead serial=125785 13:47:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:47:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:47:56 Point started: ret=0 13:47:56 point_skyscan result=0 13:47:57 Check angles 13:47:57 SkyScan query 13:47:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:47:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:47:57 Message to Master queued w/err=0: serial=125785 error=0 13:48:02 Received message from Master: op=Filter serial=125786 13:48:02 Color wheel filter change from 0 to 0 13:48:02 FLIGetFilterPos err=0 currentPosition=0 13:48:02 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:02 Filter is already there-color wheel unchanged 13:48:03 Received message from Master: op=Shutter serial=125787 13:48:03 Shutter LASER close 13:48:03 Received message from Camera: op=State serial=125789 13:48:03 GetSingleValue result=40 Value=cccccccc 13:48:03 SkyScan query 13:48:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:48:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:03 Parameters OK 13:48:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:03 Set A/D data flow result=40 13:48:03 Set A/D channel type result=40 13:48:03 Set A/D encoding result=40 13:48:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:03 Set channel filter=0.000000e+000 result=40 13:48:03 Config A/D Result=40 13:48:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:03 Get A/D filter: -9.255963e+061 result=40 13:48:03 Get A/D value=-858993460 result=40 13:48:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:03 Parameters OK 13:48:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:03 Set A/D data flow result=40 13:48:03 Set A/D channel type result=40 13:48:03 Set A/D encoding result=40 13:48:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:03 Set channel filter=0.000000e+000 result=40 13:48:03 Config A/D Result=40 13:48:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:03 Get A/D filter: -9.255963e+061 result=40 13:48:03 Get A/D value=-858993460 result=40 13:48:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:03 Aux= 13:48:03 Message to Camera, serial 125789 queued 13:48:40 Received message from Master: op=PointingHead serial=125802 13:48:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:48:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:48:40 Point started: ret=0 13:48:40 point_skyscan result=0 13:48:41 Check angles 13:48:41 SkyScan query 13:48:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:48:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:48:42 Message to Master queued w/err=0: serial=125802 error=0 13:48:47 Received message from Master: op=Filter serial=125803 13:48:47 Color wheel filter change from 0 to 0 13:48:47 FLIGetFilterPos err=0 currentPosition=0 13:48:47 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:47 Filter is already there-color wheel unchanged 13:48:47 Received message from Master: op=Shutter serial=125804 13:48:47 Shutter LASER close 13:48:47 Received message from Camera: op=State serial=125806 13:48:47 GetSingleValue result=40 Value=cccccccc 13:48:47 SkyScan query 13:48:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:48:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:47 Parameters OK 13:48:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:47 Set A/D data flow result=40 13:48:47 Set A/D channel type result=40 13:48:47 Set A/D encoding result=40 13:48:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:47 Set channel filter=0.000000e+000 result=40 13:48:47 Config A/D Result=40 13:48:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:47 Get A/D filter: -9.255963e+061 result=40 13:48:47 Get A/D value=-858993460 result=40 13:48:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:47 Parameters OK 13:48:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:47 Set A/D data flow result=40 13:48:47 Set A/D channel type result=40 13:48:47 Set A/D encoding result=40 13:48:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:47 Set channel filter=0.000000e+000 result=40 13:48:47 Config A/D Result=40 13:48:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:47 Get A/D filter: -9.255963e+061 result=40 13:48:47 Get A/D value=-858993460 result=40 13:48:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:47 Aux= 13:48:47 Message to Camera, serial 125806 queued 13:49:23 Received message from Master: op=PointingHead serial=125818 13:49:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:49:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:49:24 Point started: ret=0 13:49:24 point_skyscan result=0 13:49:25 Check angles 13:49:25 SkyScan query 13:49:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.505<-13567 Statuses=0008 0009 13:49:25 Msec=0 True Az=112.995 Ze=-23.505 Az status=0008 Ze status=0009 13:49:25 Check angles 13:49:25 SkyScan query 13:49:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.865<-14991 Statuses=0008 0009 13:49:26 Msec=750 True Az=112.995 Ze=-44.865 Az status=0008 Ze status=0009 13:49:26 Check angles 13:49:26 SkyScan query 13:49:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.835<-16389 Statuses=0008 0009 13:49:27 Msec=1500 True Az=112.995 Ze=-65.835 Az status=0008 Ze status=0009 13:49:27 Check angles 13:49:27 SkyScan query 13:49:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.82<-17788 Statuses=0008 0009 13:49:27 Msec=2250 True Az=112.995 Ze=-86.82 Az status=0008 Ze status=0009 13:49:28 Check angles 13:49:28 SkyScan query 13:49:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.255<-19217 Statuses=0008 0009 13:49:28 Msec=3000 True Az=112.995 Ze=-108.255 Az status=0008 Ze status=0009 13:49:28 Check angles 13:49:28 SkyScan query 13:49:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.18<-20612 Statuses=0008 0009 13:49:29 Msec=3750 True Az=112.995 Ze=-129.18 Az status=0008 Ze status=0009 13:49:29 Check angles 13:49:29 SkyScan query 13:49:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.12<-22008 Statuses=0008 0009 13:49:30 Msec=4500 True Az=112.995 Ze=-150.12 Az status=0008 Ze status=0009 13:49:30 Check angles 13:49:30 SkyScan query 13:49:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.255<-23417 Statuses=0008 0009 13:49:30 Msec=5250 True Az=112.995 Ze=-171.255 Az status=0008 Ze status=0009 13:49:31 Check angles 13:49:31 SkyScan query 13:49:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:49:31 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:49:31 Message to Master queued w/err=0: serial=125818 error=0 13:49:36 Received message from Master: op=Filter serial=125819 13:49:36 Color wheel filter change from 0 to 0 13:49:36 FLIGetFilterPos err=0 currentPosition=0 13:49:36 FLIGetStepsRemaining err=0 RemainingSteps=0 13:49:36 Filter is already there-color wheel unchanged 13:49:36 Received message from Master: op=Shutter serial=125820 13:49:36 Shutter LASER open 13:49:37 Received message from Camera: op=State serial=125822 13:49:37 GetSingleValue result=40 Value=cccccccc 13:49:37 SkyScan query 13:49:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:49:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:37 Parameters OK 13:49:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:37 Set A/D data flow result=40 13:49:37 Set A/D channel type result=40 13:49:37 Set A/D encoding result=40 13:49:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:37 Set channel filter=0.000000e+000 result=40 13:49:37 Config A/D Result=40 13:49:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:37 Get A/D filter: -9.255963e+061 result=40 13:49:37 Get A/D value=-858993460 result=40 13:49:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:37 Parameters OK 13:49:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:37 Set A/D data flow result=40 13:49:37 Set A/D channel type result=40 13:49:37 Set A/D encoding result=40 13:49:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:37 Set channel filter=0.000000e+000 result=40 13:49:37 Config A/D Result=40 13:49:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:37 Get A/D filter: -9.255963e+061 result=40 13:49:37 Get A/D value=-858993460 result=40 13:49:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:49:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:49:37 Aux= 13:49:37 Message to Camera, serial 125822 queued 13:49:46 Received message from Master: op=Shutter serial=125832 13:49:46 Shutter LASER close 13:49:46 Received message from Master: op=PointingHead serial=125836 13:49:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:49:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:49:46 Point started: ret=0 13:49:46 point_skyscan result=0 13:49:47 Check angles 13:49:47 SkyScan query 13:49:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 13:49:48 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 13:49:48 Check angles 13:49:48 SkyScan query 13:49:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 13:49:48 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 13:49:49 Check angles 13:49:49 SkyScan query 13:49:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.995<-18733 Statuses=0008 0009 13:49:49 Msec=1500 True Az=112.995 Ze=-100.995 Az status=0008 Ze status=0009 13:49:49 Check angles 13:49:49 SkyScan query 13:49:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.515<-17301 Statuses=0008 0009 13:49:50 Msec=2250 True Az=112.995 Ze=-79.515 Az status=0008 Ze status=0009 13:49:50 Check angles 13:49:50 SkyScan query 13:49:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.07<-15938 Statuses=0008 0009 13:49:51 Msec=3000 True Az=112.995 Ze=-59.07 Az status=0008 Ze status=0009 13:49:51 Check angles 13:49:51 SkyScan query 13:49:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.62<-14508 Statuses=0008 0009 13:49:52 Msec=3750 True Az=112.995 Ze=-37.62 Az status=0008 Ze status=0009 13:49:52 Check angles 13:49:52 SkyScan query 13:49:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.665<-13111 Statuses=0008 0009 13:49:52 Msec=4500 True Az=112.995 Ze=-16.665 Az status=0008 Ze status=0009 13:49:52 Check angles 13:49:52 SkyScan query 13:49:53 SkyScan query done: ret=0 az=112.995<-7533 ze=4.515<-11699 Statuses=0008 0009 13:49:53 Msec=5250 True Az=112.995 Ze=4.515 Az status=0008 Ze status=0009 13:49:53 Check angles 13:49:53 SkyScan query 13:49:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:49:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:49:54 Message to Master queued w/err=0: serial=125836 error=0 13:49:59 Received message from Master: op=Filter serial=125837 13:49:59 Color wheel filter change from 0 to 0 13:49:59 FLIGetFilterPos err=0 currentPosition=0 13:49:59 FLIGetStepsRemaining err=0 RemainingSteps=0 13:49:59 Filter is already there-color wheel unchanged 13:49:59 Received message from Master: op=Shutter serial=125838 13:49:59 Shutter LASER close 13:49:59 Received message from Camera: op=State serial=125840 13:49:59 GetSingleValue result=40 Value=cccccccc 13:49:59 SkyScan query 13:50:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:50:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:00 Parameters OK 13:50:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:00 Set A/D data flow result=40 13:50:00 Set A/D channel type result=40 13:50:00 Set A/D encoding result=40 13:50:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:00 Set channel filter=0.000000e+000 result=40 13:50:00 Config A/D Result=40 13:50:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:00 Get A/D filter: -9.255963e+061 result=40 13:50:00 Get A/D value=-858993460 result=40 13:50:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:00 Parameters OK 13:50:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:00 Set A/D data flow result=40 13:50:00 Set A/D channel type result=40 13:50:00 Set A/D encoding result=40 13:50:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:00 Set channel filter=0.000000e+000 result=40 13:50:00 Config A/D Result=40 13:50:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:00 Get A/D filter: -9.255963e+061 result=40 13:50:00 Get A/D value=-858993460 result=40 13:50:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:00 Aux= 13:50:00 Message to Camera, serial 125840 queued 13:50:37 Received message from Master: op=PointingHead serial=125853 13:50:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:50:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:50:37 Point started: ret=0 13:50:37 point_skyscan result=0 13:50:38 Check angles 13:50:38 SkyScan query 13:50:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:50:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:50:38 Message to Master queued w/err=0: serial=125853 error=0 13:50:43 Received message from Master: op=Filter serial=125854 13:50:43 Color wheel filter change from 0 to 0 13:50:43 FLIGetFilterPos err=0 currentPosition=0 13:50:43 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:43 Filter is already there-color wheel unchanged 13:50:43 Received message from Master: op=Shutter serial=125855 13:50:43 Shutter LASER close 13:50:43 Received message from Camera: op=State serial=125857 13:50:43 GetSingleValue result=40 Value=cccccccc 13:50:43 SkyScan query 13:50:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:50:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:44 Parameters OK 13:50:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:44 Set A/D data flow result=40 13:50:44 Set A/D channel type result=40 13:50:44 Set A/D encoding result=40 13:50:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:44 Set channel filter=0.000000e+000 result=40 13:50:44 Config A/D Result=40 13:50:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:44 Get A/D filter: -9.255963e+061 result=40 13:50:44 Get A/D value=-858993460 result=40 13:50:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:44 Parameters OK 13:50:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:44 Set A/D data flow result=40 13:50:44 Set A/D channel type result=40 13:50:44 Set A/D encoding result=40 13:50:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:44 Set channel filter=0.000000e+000 result=40 13:50:44 Config A/D Result=40 13:50:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:44 Get A/D filter: -9.255963e+061 result=40 13:50:44 Get A/D value=-858993460 result=40 13:50:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:44 Aux= 13:50:44 Message to Camera, serial 125857 queued 13:51:21 Received message from Master: op=PointingHead serial=125870 13:51:21 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:51:21 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:51:21 Point started: ret=0 13:51:21 point_skyscan result=0 13:51:22 Check angles 13:51:22 SkyScan query 13:51:23 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 13:51:23 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 13:51:23 Check angles 13:51:23 SkyScan query 13:51:23 SkyScan query done: ret=0 az=153.915<-10261 ze=-6.495<-12433 Statuses=0009 0008 13:51:23 Msec=750 True Az=153.915 Ze=-6.495 Az status=0009 Ze status=0008 13:51:23 Check angles 13:51:23 SkyScan query 13:51:24 SkyScan query done: ret=0 az=171.39<-11426 ze=-6.495<-12433 Statuses=0009 0008 13:51:24 Msec=1500 True Az=171.39 Ze=-6.495 Az status=0009 Ze status=0008 13:51:24 Check angles 13:51:24 SkyScan query 13:51:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:51:25 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:51:25 Message to Master queued w/err=0: serial=125870 error=0 13:51:30 Received message from Master: op=Filter serial=125871 13:51:30 Color wheel filter change from 0 to 0 13:51:30 FLIGetFilterPos err=0 currentPosition=0 13:51:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:51:30 Filter is already there-color wheel unchanged 13:51:30 Received message from Master: op=Shutter serial=125872 13:51:30 Shutter LASER close 13:51:30 Received message from Camera: op=State serial=125874 13:51:30 GetSingleValue result=40 Value=cccccccc 13:51:30 SkyScan query 13:51:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:51:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:31 Parameters OK 13:51:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:31 Set A/D data flow result=40 13:51:31 Set A/D channel type result=40 13:51:31 Set A/D encoding result=40 13:51:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:31 Set channel filter=0.000000e+000 result=40 13:51:31 Config A/D Result=40 13:51:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:31 Get A/D filter: -9.255963e+061 result=40 13:51:31 Get A/D value=-858993460 result=40 13:51:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:31 Parameters OK 13:51:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:31 Set A/D data flow result=40 13:51:31 Set A/D channel type result=40 13:51:31 Set A/D encoding result=40 13:51:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:31 Set channel filter=0.000000e+000 result=40 13:51:31 Config A/D Result=40 13:51:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:31 Get A/D filter: -9.255963e+061 result=40 13:51:31 Get A/D value=-858993460 result=40 13:51:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:51:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:51:31 Aux= 13:51:31 Message to Camera, serial 125874 queued 13:52:07 Received message from Master: op=PointingHead serial=125887 13:52:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:52:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:52:08 Point started: ret=0 13:52:08 point_skyscan result=0 13:52:09 Check angles 13:52:09 SkyScan query 13:52:09 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 13:52:09 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 13:52:09 Check angles 13:52:09 SkyScan query 13:52:10 SkyScan query done: ret=0 az=135.105<-9007 ze=6.495<-11567 Statuses=0009 0008 13:52:10 Msec=750 True Az=135.105 Ze=6.495 Az status=0009 Ze status=0008 13:52:10 Check angles 13:52:10 SkyScan query 13:52:11 SkyScan query done: ret=0 az=117.27<-7818 ze=6.495<-11567 Statuses=0009 0008 13:52:11 Msec=1500 True Az=117.27 Ze=6.495 Az status=0009 Ze status=0008 13:52:11 Check angles 13:52:11 SkyScan query 13:52:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:52:11 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:52:11 Message to Master queued w/err=0: serial=125887 error=0 13:52:16 Received message from Master: op=Filter serial=125888 13:52:16 Color wheel filter change from 0 to 0 13:52:16 FLIGetFilterPos err=0 currentPosition=0 13:52:16 FLIGetStepsRemaining err=0 RemainingSteps=0 13:52:16 Filter is already there-color wheel unchanged 13:52:17 Received message from Master: op=Shutter serial=125889 13:52:17 Shutter LASER close 13:52:17 Received message from Camera: op=State serial=125891 13:52:17 GetSingleValue result=40 Value=cccccccc 13:52:17 SkyScan query 13:52:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:52:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:17 Parameters OK 13:52:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:17 Set A/D data flow result=40 13:52:17 Set A/D channel type result=40 13:52:17 Set A/D encoding result=40 13:52:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:17 Set channel filter=0.000000e+000 result=40 13:52:17 Config A/D Result=40 13:52:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:17 Get A/D filter: -9.255963e+061 result=40 13:52:17 Get A/D value=-858993460 result=40 13:52:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:17 Parameters OK 13:52:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:17 Set A/D data flow result=40 13:52:17 Set A/D channel type result=40 13:52:17 Set A/D encoding result=40 13:52:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:17 Set channel filter=0.000000e+000 result=40 13:52:17 Config A/D Result=40 13:52:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:17 Get A/D filter: -9.255963e+061 result=40 13:52:17 Get A/D value=-858993460 result=40 13:52:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:52:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:52:17 Aux= 13:52:17 Message to Camera, serial 125891 queued 13:52:54 Received message from Master: op=PointingHead serial=125904 13:52:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:52:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:52:54 Point started: ret=0 13:52:54 point_skyscan result=0 13:52:55 Check angles 13:52:55 SkyScan query 13:52:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 13:52:56 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 13:52:56 Check angles 13:52:56 SkyScan query 13:52:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 13:52:56 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 13:52:57 Check angles 13:52:57 SkyScan query 13:52:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 13:52:57 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 13:52:57 Check angles 13:52:57 SkyScan query 13:52:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 13:52:58 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 13:52:58 Check angles 13:52:58 SkyScan query 13:52:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.805<-19187 Statuses=0008 0009 13:52:59 Msec=3000 True Az=112.995 Ze=-107.805 Az status=0008 Ze status=0009 13:52:59 Check angles 13:52:59 SkyScan query 13:52:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.745<-20583 Statuses=0008 0009 13:52:59 Msec=3750 True Az=112.995 Ze=-128.745 Az status=0008 Ze status=0009 13:53:00 Check angles 13:53:00 SkyScan query 13:53:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.73<-21982 Statuses=0008 0009 13:53:00 Msec=4500 True Az=112.995 Ze=-149.73 Az status=0008 Ze status=0009 13:53:00 Check angles 13:53:00 SkyScan query 13:53:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.955<-23397 Statuses=0008 0009 13:53:01 Msec=5250 True Az=112.995 Ze=-170.955 Az status=0008 Ze status=0009 13:53:01 Check angles 13:53:01 SkyScan query 13:53:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:53:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:53:02 Message to Master queued w/err=0: serial=125904 error=0 13:53:07 Received message from Master: op=Filter serial=125905 13:53:07 Color wheel filter change from 0 to 0 13:53:07 FLIGetFilterPos err=0 currentPosition=0 13:53:07 FLIGetStepsRemaining err=0 RemainingSteps=0 13:53:07 Filter is already there-color wheel unchanged 13:53:07 Received message from Master: op=Shutter serial=125906 13:53:07 Shutter LASER open 13:53:07 Received message from Camera: op=State serial=125908 13:53:07 GetSingleValue result=40 Value=cccccccc 13:53:07 SkyScan query 13:53:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:53:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:08 Parameters OK 13:53:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:08 Set A/D data flow result=40 13:53:08 Set A/D channel type result=40 13:53:08 Set A/D encoding result=40 13:53:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:08 Set channel filter=0.000000e+000 result=40 13:53:08 Config A/D Result=40 13:53:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:08 Get A/D filter: -9.255963e+061 result=40 13:53:08 Get A/D value=-858993460 result=40 13:53:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:08 Parameters OK 13:53:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:08 Set A/D data flow result=40 13:53:08 Set A/D channel type result=40 13:53:08 Set A/D encoding result=40 13:53:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:08 Set channel filter=0.000000e+000 result=40 13:53:08 Config A/D Result=40 13:53:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:08 Get A/D filter: -9.255963e+061 result=40 13:53:08 Get A/D value=-858993460 result=40 13:53:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:53:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:53:08 Aux= 13:53:08 Message to Camera, serial 125908 queued 13:53:16 Received message from Master: op=Shutter serial=125918 13:53:16 Shutter LASER close 13:53:16 Received message from Master: op=PointingHead serial=125922 13:53:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:53:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:53:17 Point started: ret=0 13:53:17 point_skyscan result=0 13:53:18 Check angles 13:53:18 SkyScan query 13:53:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 13:53:18 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 13:53:18 Check angles 13:53:18 SkyScan query 13:53:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.98<-20132 Statuses=0008 0009 13:53:19 Msec=750 True Az=112.995 Ze=-121.98 Az status=0008 Ze status=0009 13:53:19 Check angles 13:53:19 SkyScan query 13:53:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.055<-18737 Statuses=0008 0009 13:53:20 Msec=1500 True Az=112.995 Ze=-101.055 Az status=0008 Ze status=0009 13:53:20 Check angles 13:53:20 SkyScan query 13:53:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 13:53:20 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 13:53:21 Check angles 13:53:21 SkyScan query 13:53:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.62<-15908 Statuses=0008 0009 13:53:21 Msec=3000 True Az=112.995 Ze=-58.62 Az status=0008 Ze status=0009 13:53:21 Check angles 13:53:21 SkyScan query 13:53:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.665<-14511 Statuses=0008 0009 13:53:22 Msec=3750 True Az=112.995 Ze=-37.665 Az status=0008 Ze status=0009 13:53:22 Check angles 13:53:22 SkyScan query 13:53:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.71<-13114 Statuses=0008 0009 13:53:23 Msec=4500 True Az=112.995 Ze=-16.71 Az status=0008 Ze status=0009 13:53:23 Check angles 13:53:23 SkyScan query 13:53:23 SkyScan query done: ret=0 az=113.01<-7534 ze=4.2<-11720 Statuses=0008 0009 13:53:23 Msec=5250 True Az=113.01 Ze=4.2 Az status=0008 Ze status=0009 13:53:24 Check angles 13:53:24 SkyScan query 13:53:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:53:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:53:24 Message to Master queued w/err=0: serial=125922 error=0 13:53:29 Received message from Master: op=Filter serial=125923 13:53:29 Color wheel filter change from 0 to 0 13:53:29 FLIGetFilterPos err=0 currentPosition=0 13:53:29 FLIGetStepsRemaining err=0 RemainingSteps=0 13:53:29 Filter is already there-color wheel unchanged 13:53:29 Received message from Master: op=Shutter serial=125924 13:53:29 Shutter LASER close 13:53:30 Received message from Camera: op=State serial=125926 13:53:30 GetSingleValue result=40 Value=cccccccc 13:53:30 SkyScan query 13:53:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:53:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:30 Parameters OK 13:53:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:30 Set A/D data flow result=40 13:53:30 Set A/D channel type result=40 13:53:30 Set A/D encoding result=40 13:53:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:30 Set channel filter=0.000000e+000 result=40 13:53:30 Config A/D Result=40 13:53:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:30 Get A/D filter: -9.255963e+061 result=40 13:53:30 Get A/D value=-858993460 result=40 13:53:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:30 Parameters OK 13:53:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:30 Set A/D data flow result=40 13:53:30 Set A/D channel type result=40 13:53:30 Set A/D encoding result=40 13:53:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:30 Set channel filter=0.000000e+000 result=40 13:53:30 Config A/D Result=40 13:53:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:30 Get A/D filter: -9.255963e+061 result=40 13:53:30 Get A/D value=-858993460 result=40 13:53:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:53:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:53:30 Aux= 13:53:30 Message to Camera, serial 125926 queued 13:54:07 Received message from Master: op=PointingHead serial=125939 13:54:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:54:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:54:07 Point started: ret=0 13:54:07 point_skyscan result=0 13:54:08 Check angles 13:54:08 SkyScan query 13:54:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:54:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:54:09 Message to Master queued w/err=0: serial=125939 error=0 13:54:14 Received message from Master: op=Filter serial=125940 13:54:14 Color wheel filter change from 0 to 0 13:54:14 FLIGetFilterPos err=0 currentPosition=0 13:54:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:54:14 Filter is already there-color wheel unchanged 13:54:14 Received message from Master: op=Shutter serial=125941 13:54:14 Shutter LASER close 13:54:14 Received message from Camera: op=State serial=125943 13:54:14 GetSingleValue result=40 Value=cccccccc 13:54:14 SkyScan query 13:54:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:54:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:14 Parameters OK 13:54:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:14 Set A/D data flow result=40 13:54:14 Set A/D channel type result=40 13:54:14 Set A/D encoding result=40 13:54:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:14 Set channel filter=0.000000e+000 result=40 13:54:14 Config A/D Result=40 13:54:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:14 Get A/D filter: -9.255963e+061 result=40 13:54:14 Get A/D value=-858993460 result=40 13:54:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:14 Parameters OK 13:54:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:14 Set A/D data flow result=40 13:54:14 Set A/D channel type result=40 [UTC 2019-3-5 13:54:14] 13:54:14 Set A/D encoding result=40 13:54:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:15 Set channel filter=0.000000e+000 result=40 13:54:15 Config A/D Result=40 13:54:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:15 Get A/D filter: -9.255963e+061 result=40 13:54:15 Get A/D value=-858993460 result=40 13:54:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:54:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:54:15 Aux= 13:54:15 Message to Camera, serial 125943 queued 13:54:50 Received message from Master: op=PointingHead serial=125955 13:54:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:54:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:54:51 Point started: ret=0 13:54:51 point_skyscan result=0 13:54:51 Check angles 13:54:51 SkyScan query 13:54:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:54:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:54:52 Message to Master queued w/err=0: serial=125955 error=0 13:54:57 Received message from Master: op=Filter serial=125956 13:54:57 Color wheel filter change from 0 to 0 13:54:57 FLIGetFilterPos err=0 currentPosition=0 13:54:57 FLIGetStepsRemaining err=0 RemainingSteps=0 13:54:57 Filter is already there-color wheel unchanged 13:54:57 Received message from Master: op=Shutter serial=125957 13:54:57 Shutter LASER close 13:54:57 Received message from Camera: op=State serial=125959 13:54:57 GetSingleValue result=40 Value=cccccccc 13:54:57 SkyScan query 13:54:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:54:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:58 Parameters OK 13:54:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:58 Set A/D data flow result=40 13:54:58 Set A/D channel type result=40 13:54:58 Set A/D encoding result=40 13:54:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:58 Set channel filter=0.000000e+000 result=40 13:54:58 Config A/D Result=40 13:54:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:58 Get A/D filter: -9.255963e+061 result=40 13:54:58 Get A/D value=-858993460 result=40 13:54:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:58 Parameters OK 13:54:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:58 Set A/D data flow result=40 13:54:58 Set A/D channel type result=40 13:54:58 Set A/D encoding result=40 13:54:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:58 Set channel filter=0.000000e+000 result=40 13:54:58 Config A/D Result=40 13:54:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:58 Get A/D filter: -9.255963e+061 result=40 13:54:58 Get A/D value=-858993460 result=40 13:54:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:54:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:54:58 Aux= 13:54:58 Message to Camera, serial 125959 queued 13:55:35 Received message from Master: op=PointingHead serial=125972 13:55:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:55:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:55:35 Point started: ret=0 13:55:35 point_skyscan result=0 13:55:36 Check angles 13:55:36 SkyScan query 13:55:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:55:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:55:36 Message to Master queued w/err=0: serial=125972 error=0 13:55:41 Received message from Master: op=Filter serial=125973 13:55:41 Color wheel filter change from 0 to 0 13:55:41 FLIGetFilterPos err=0 currentPosition=0 13:55:41 FLIGetStepsRemaining err=0 RemainingSteps=0 13:55:41 Filter is already there-color wheel unchanged 13:55:41 Received message from Master: op=Shutter serial=125974 13:55:41 Shutter LASER close 13:55:42 Received message from Camera: op=State serial=125976 13:55:42 GetSingleValue result=40 Value=cccccccc 13:55:42 SkyScan query 13:55:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:55:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:42 Parameters OK 13:55:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:42 Set A/D data flow result=40 13:55:42 Set A/D channel type result=40 13:55:42 Set A/D encoding result=40 13:55:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:42 Set channel filter=0.000000e+000 result=40 13:55:42 Config A/D Result=40 13:55:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:42 Get A/D filter: -9.255963e+061 result=40 13:55:42 Get A/D value=-858993460 result=40 13:55:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:42 Parameters OK 13:55:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:42 Set A/D data flow result=40 13:55:42 Set A/D channel type result=40 13:55:42 Set A/D encoding result=40 13:55:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:42 Set channel filter=0.000000e+000 result=40 13:55:42 Config A/D Result=40 13:55:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:42 Get A/D filter: -9.255963e+061 result=40 13:55:42 Get A/D value=-858993460 result=40 13:55:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:55:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:55:42 Aux= 13:55:42 Message to Camera, serial 125976 queued 13:56:19 Received message from Master: op=PointingHead serial=125989 13:56:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:56:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:56:19 Point started: ret=0 13:56:19 point_skyscan result=0 13:56:20 Check angles 13:56:20 SkyScan query 13:56:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 13:56:21 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 13:56:21 Check angles 13:56:21 SkyScan query 13:56:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 13:56:21 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 13:56:22 Check angles 13:56:22 SkyScan query 13:56:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.175<-16345 Statuses=0008 0009 13:56:22 Msec=1500 True Az=112.995 Ze=-65.175 Az status=0008 Ze status=0009 13:56:22 Check angles 13:56:22 SkyScan query 13:56:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.115<-17741 Statuses=0008 0009 13:56:23 Msec=2250 True Az=112.995 Ze=-86.115 Az status=0008 Ze status=0009 13:56:23 Check angles 13:56:23 SkyScan query 13:56:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.085<-19139 Statuses=0008 0009 13:56:24 Msec=3000 True Az=112.995 Ze=-107.085 Az status=0008 Ze status=0009 13:56:24 Check angles 13:56:24 SkyScan query 13:56:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.475<-20565 Statuses=0008 0009 13:56:24 Msec=3750 True Az=112.995 Ze=-128.475 Az status=0008 Ze status=0009 13:56:25 Check angles 13:56:25 SkyScan query 13:56:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.49<-21966 Statuses=0008 0009 13:56:25 Msec=4500 True Az=112.995 Ze=-149.49 Az status=0008 Ze status=0009 13:56:25 Check angles 13:56:25 SkyScan query 13:56:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.415<-23361 Statuses=0008 0009 13:56:26 Msec=5250 True Az=112.995 Ze=-170.415 Az status=0008 Ze status=0009 13:56:26 Check angles 13:56:26 SkyScan query 13:56:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:56:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:56:27 Message to Master queued w/err=0: serial=125989 error=0 13:56:32 Received message from Master: op=Filter serial=125990 13:56:32 Color wheel filter change from 0 to 0 13:56:32 FLIGetFilterPos err=0 currentPosition=0 13:56:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:56:32 Filter is already there-color wheel unchanged 13:56:32 Received message from Master: op=Shutter serial=125991 13:56:32 Shutter LASER open 13:56:32 Received message from Camera: op=State serial=125993 13:56:32 GetSingleValue result=40 Value=cccccccc 13:56:32 SkyScan query 13:56:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:56:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:33 Parameters OK 13:56:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:33 Set A/D data flow result=40 13:56:33 Set A/D channel type result=40 13:56:33 Set A/D encoding result=40 13:56:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:33 Set channel filter=0.000000e+000 result=40 13:56:33 Config A/D Result=40 13:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:33 Get A/D filter: -9.255963e+061 result=40 13:56:33 Get A/D value=-858993460 result=40 13:56:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:33 Parameters OK 13:56:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:33 Set A/D data flow result=40 13:56:33 Set A/D channel type result=40 13:56:33 Set A/D encoding result=40 13:56:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:33 Set channel filter=0.000000e+000 result=40 13:56:33 Config A/D Result=40 13:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:33 Get A/D filter: -9.255963e+061 result=40 13:56:33 Get A/D value=-858993460 result=40 13:56:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:56:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:56:33 Aux= 13:56:33 Message to Camera, serial 125993 queued 13:56:41 Received message from Master: op=Shutter serial=126003 13:56:41 Shutter LASER close 13:56:42 Received message from Master: op=PointingHead serial=126007 13:56:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:56:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:56:42 Point started: ret=0 13:56:42 point_skyscan result=0 13:56:43 Check angles 13:56:43 SkyScan query 13:56:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 13:56:43 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 13:56:43 Check angles 13:56:43 SkyScan query 13:56:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.205<-20147 Statuses=0008 0009 13:56:44 Msec=750 True Az=112.995 Ze=-122.205 Az status=0008 Ze status=0009 13:56:44 Check angles 13:56:44 SkyScan query 13:56:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.19<-18746 Statuses=0008 0009 13:56:45 Msec=1500 True Az=112.995 Ze=-101.19 Az status=0008 Ze status=0009 13:56:45 Check angles 13:56:45 SkyScan query 13:56:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.31<-17354 Statuses=0008 0009 13:56:45 Msec=2250 True Az=112.995 Ze=-80.31 Az status=0008 Ze status=0009 13:56:46 Check angles 13:56:46 SkyScan query 13:56:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.875<-15925 Statuses=0008 0009 13:56:46 Msec=3000 True Az=112.995 Ze=-58.875 Az status=0008 Ze status=0009 13:56:46 Check angles 13:56:46 SkyScan query 13:56:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.86<-14524 Statuses=0008 0009 13:56:47 Msec=3750 True Az=112.995 Ze=-37.86 Az status=0008 Ze status=0009 13:56:47 Check angles 13:56:47 SkyScan query 13:56:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.92<-13128 Statuses=0008 0009 13:56:48 Msec=4500 True Az=112.995 Ze=-16.92 Az status=0008 Ze status=0009 13:56:48 Check angles 13:56:48 SkyScan query 13:56:48 SkyScan query done: ret=0 az=112.995<-7533 ze=4.02<-11732 Statuses=0008 0009 13:56:48 Msec=5250 True Az=112.995 Ze=4.02 Az status=0008 Ze status=0009 13:56:49 Check angles 13:56:49 SkyScan query 13:56:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:56:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:56:49 Message to Master queued w/err=0: serial=126007 error=0 13:56:54 Received message from Master: op=Filter serial=126008 13:56:54 Color wheel filter change from 0 to 0 13:56:54 FLIGetFilterPos err=0 currentPosition=0 13:56:54 FLIGetStepsRemaining err=0 RemainingSteps=0 13:56:54 Filter is already there-color wheel unchanged 13:56:54 Received message from Master: op=Shutter serial=126009 13:56:54 Shutter LASER close 13:56:55 Received message from Camera: op=State serial=126011 13:56:55 GetSingleValue result=40 Value=cccccccc 13:56:55 SkyScan query 13:56:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:56:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:55 Parameters OK 13:56:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:55 Set A/D data flow result=40 13:56:55 Set A/D channel type result=40 13:56:55 Set A/D encoding result=40 13:56:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:55 Set channel filter=0.000000e+000 result=40 13:56:55 Config A/D Result=40 13:56:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:55 Get A/D filter: -9.255963e+061 result=40 13:56:55 Get A/D value=-858993460 result=40 13:56:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:55 Parameters OK 13:56:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:55 Set A/D data flow result=40 13:56:55 Set A/D channel type result=40 13:56:55 Set A/D encoding result=40 13:56:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:55 Set channel filter=0.000000e+000 result=40 13:56:55 Config A/D Result=40 13:56:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:55 Get A/D filter: -9.255963e+061 result=40 13:56:55 Get A/D value=-858993460 result=40 13:56:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:56:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:56:55 Aux= 13:56:55 Message to Camera, serial 126011 queued 13:57:32 Received message from Master: op=PointingHead serial=126024 13:57:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:57:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:57:32 Point started: ret=0 13:57:32 point_skyscan result=0 13:57:33 Check angles 13:57:33 SkyScan query 13:57:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:57:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:57:34 Message to Master queued w/err=0: serial=126024 error=0 13:57:39 Received message from Master: op=Filter serial=126025 13:57:39 Color wheel filter change from 0 to 0 13:57:39 FLIGetFilterPos err=0 currentPosition=0 13:57:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:57:39 Filter is already there-color wheel unchanged 13:57:39 Received message from Master: op=Shutter serial=126026 13:57:39 Shutter LASER close 13:57:39 Received message from Camera: op=State serial=126028 13:57:39 GetSingleValue result=40 Value=cccccccc 13:57:39 SkyScan query 13:57:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:57:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:39 Parameters OK 13:57:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:39 Set A/D data flow result=40 13:57:39 Set A/D channel type result=40 13:57:39 Set A/D encoding result=40 13:57:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:39 Set channel filter=0.000000e+000 result=40 13:57:39 Config A/D Result=40 13:57:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:39 Get A/D filter: -9.255963e+061 result=40 13:57:39 Get A/D value=-858993460 result=40 13:57:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:39 Parameters OK 13:57:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:39 Set A/D data flow result=40 13:57:39 Set A/D channel type result=40 13:57:39 Set A/D encoding result=40 13:57:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:39 Set channel filter=0.000000e+000 result=40 13:57:39 Config A/D Result=40 13:57:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:39 Get A/D filter: -9.255963e+061 result=40 13:57:39 Get A/D value=-858993460 result=40 13:57:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:57:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:57:39 Aux= 13:57:39 Message to Camera, serial 126028 queued 13:58:16 Received message from Master: op=PointingHead serial=126041 13:58:16 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:58:16 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:58:17 Point started: ret=0 13:58:17 point_skyscan result=0 13:58:17 Check angles 13:58:17 SkyScan query 13:58:18 SkyScan query done: ret=0 az=136.35<-9090 ze=-6.51<-12434 Statuses=0009 0008 13:58:18 Msec=0 True Az=136.35 Ze=-6.51 Az status=0009 Ze status=0008 13:58:18 Check angles 13:58:18 SkyScan query 13:58:19 SkyScan query done: ret=0 az=153.78<-10252 ze=-6.51<-12434 Statuses=0009 0008 13:58:19 Msec=750 True Az=153.78 Ze=-6.51 Az status=0009 Ze status=0008 13:58:19 Check angles 13:58:19 SkyScan query 13:58:20 SkyScan query done: ret=0 az=171.21<-11414 ze=-6.51<-12434 Statuses=0009 0008 13:58:20 Msec=1500 True Az=171.21 Ze=-6.51 Az status=0009 Ze status=0008 13:58:20 Check angles 13:58:20 SkyScan query 13:58:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:58:20 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:58:20 Message to Master queued w/err=0: serial=126041 error=0 13:58:25 Received message from Master: op=Filter serial=126042 13:58:25 Color wheel filter change from 0 to 0 13:58:25 FLIGetFilterPos err=0 currentPosition=0 13:58:25 FLIGetStepsRemaining err=0 RemainingSteps=0 13:58:25 Filter is already there-color wheel unchanged 13:58:25 Received message from Master: op=Shutter serial=126043 13:58:25 Shutter LASER close 13:58:26 Received message from Camera: op=State serial=126045 13:58:26 GetSingleValue result=40 Value=cccccccc 13:58:26 SkyScan query 13:58:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:58:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:26 Parameters OK 13:58:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:26 Set A/D data flow result=40 13:58:26 Set A/D channel type result=40 13:58:26 Set A/D encoding result=40 13:58:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:26 Set channel filter=0.000000e+000 result=40 13:58:26 Config A/D Result=40 13:58:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:26 Get A/D filter: -9.255963e+061 result=40 13:58:26 Get A/D value=-858993460 result=40 13:58:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:26 Parameters OK 13:58:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:26 Set A/D data flow result=40 13:58:26 Set A/D channel type result=40 13:58:26 Set A/D encoding result=40 13:58:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:26 Set channel filter=0.000000e+000 result=40 13:58:26 Config A/D Result=40 13:58:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:26 Get A/D filter: -9.255963e+061 result=40 13:58:26 Get A/D value=-858993460 result=40 13:58:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:58:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:58:26 Aux= 13:58:26 Message to Camera, serial 126045 queued 13:59:03 Received message from Master: op=PointingHead serial=126058 13:59:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:59:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:59:03 Point started: ret=0 13:59:03 point_skyscan result=0 13:59:04 Check angles 13:59:04 SkyScan query 13:59:05 SkyScan query done: ret=0 az=153.135<-10209 ze=6.51<-11566 Statuses=0009 0008 13:59:05 Msec=0 True Az=153.135 Ze=6.51 Az status=0009 Ze status=0008 13:59:05 Check angles 13:59:05 SkyScan query 13:59:05 SkyScan query done: ret=0 az=135.645<-9043 ze=6.495<-11567 Statuses=0009 0008 13:59:05 Msec=750 True Az=135.645 Ze=6.495 Az status=0009 Ze status=0008 13:59:06 Check angles 13:59:06 SkyScan query 13:59:06 SkyScan query done: ret=0 az=118.185<-7879 ze=6.495<-11567 Statuses=0009 0008 13:59:06 Msec=1500 True Az=118.185 Ze=6.495 Az status=0009 Ze status=0008 13:59:06 Check angles 13:59:06 SkyScan query 13:59:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:59:07 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:59:07 Message to Master queued w/err=0: serial=126058 error=0 13:59:12 Received message from Master: op=Filter serial=126059 13:59:12 Color wheel filter change from 0 to 0 13:59:12 FLIGetFilterPos err=0 currentPosition=0 13:59:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:59:12 Filter is already there-color wheel unchanged 13:59:12 Received message from Master: op=Shutter serial=126060 13:59:12 Shutter LASER close 13:59:12 Received message from Camera: op=State serial=126062 13:59:12 GetSingleValue result=40 Value=cccccccc 13:59:12 SkyScan query 13:59:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:59:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:13 Parameters OK 13:59:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:13 Set A/D data flow result=40 13:59:13 Set A/D channel type result=40 13:59:13 Set A/D encoding result=40 13:59:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:13 Set channel filter=0.000000e+000 result=40 13:59:13 Config A/D Result=40 13:59:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:13 Get A/D filter: -9.255963e+061 result=40 13:59:13 Get A/D value=-858993460 result=40 13:59:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:13 Parameters OK 13:59:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:13 Set A/D data flow result=40 13:59:13 Set A/D channel type result=40 13:59:13 Set A/D encoding result=40 13:59:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:13 Set channel filter=0.000000e+000 result=40 13:59:13 Config A/D Result=40 13:59:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:13 Get A/D filter: -9.255963e+061 result=40 13:59:13 Get A/D value=-858993460 result=40 13:59:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:59:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:59:13 Aux= 13:59:13 Message to Camera, serial 126062 queued 13:59:50 Received message from Master: op=PointingHead serial=126075 13:59:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:59:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:59:50 Point started: ret=0 13:59:50 point_skyscan result=0 13:59:51 Check angles 13:59:51 SkyScan query 13:59:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 13:59:51 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 13:59:51 Check angles 13:59:51 SkyScan query 13:59:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.64<-14976 Statuses=0008 0009 13:59:52 Msec=750 True Az=112.995 Ze=-44.64 Az status=0008 Ze status=0009 13:59:52 Check angles 13:59:52 SkyScan query 13:59:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.58<-16372 Statuses=0008 0009 13:59:53 Msec=1500 True Az=112.995 Ze=-65.58 Az status=0008 Ze status=0009 13:59:53 Check angles 13:59:53 SkyScan query 13:59:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.55<-17770 Statuses=0008 0009 13:59:53 Msec=2250 True Az=112.995 Ze=-86.55 Az status=0008 Ze status=0009 13:59:54 Check angles 13:59:54 SkyScan query 13:59:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.535<-19169 Statuses=0008 0009 13:59:54 Msec=3000 True Az=112.995 Ze=-107.535 Az status=0008 Ze status=0009 13:59:54 Check angles 13:59:54 SkyScan query 13:59:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.475<-20565 Statuses=0008 0009 13:59:55 Msec=3750 True Az=112.995 Ze=-128.475 Az status=0008 Ze status=0009 13:59:55 Check angles 13:59:55 SkyScan query 13:59:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.505<-21967 Statuses=0008 0009 13:59:56 Msec=4500 True Az=112.995 Ze=-149.505 Az status=0008 Ze status=0009 13:59:56 Check angles 13:59:56 SkyScan query 13:59:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.445<-23363 Statuses=0008 0009 13:59:56 Msec=5250 True Az=112.995 Ze=-170.445 Az status=0008 Ze status=0009 13:59:57 Check angles 13:59:57 SkyScan query 13:59:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:59:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:59:57 Message to Master queued w/err=0: serial=126075 error=0 14:00:02 Received message from Master: op=Filter serial=126076 14:00:02 Color wheel filter change from 0 to 0 14:00:02 FLIGetFilterPos err=0 currentPosition=0 14:00:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:00:02 Filter is already there-color wheel unchanged 14:00:02 Received message from Master: op=Shutter serial=126077 14:00:02 Shutter LASER open 14:00:03 Received message from Camera: op=State serial=126079 14:00:03 GetSingleValue result=40 Value=cccccccc 14:00:03 SkyScan query 14:00:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:00:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:03 Parameters OK 14:00:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:03 Set A/D data flow result=40 14:00:03 Set A/D channel type result=40 14:00:03 Set A/D encoding result=40 14:00:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:03 Set channel filter=0.000000e+000 result=40 14:00:03 Config A/D Result=40 14:00:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:03 Get A/D filter: -9.255963e+061 result=40 14:00:03 Get A/D value=-858993460 result=40 14:00:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:03 Parameters OK 14:00:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:03 Set A/D data flow result=40 14:00:03 Set A/D channel type result=40 14:00:03 Set A/D encoding result=40 14:00:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:03 Set channel filter=0.000000e+000 result=40 14:00:03 Config A/D Result=40 14:00:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:03 Get A/D filter: -9.255963e+061 result=40 14:00:03 Get A/D value=-858993460 result=40 14:00:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:00:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:00:03 Aux= 14:00:03 Message to Camera, serial 126079 queued 14:00:12 Received message from Master: op=Shutter serial=126089 14:00:12 Shutter LASER close 14:00:12 Received message from Master: op=PointingHead serial=126093 14:00:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:00:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:00:12 Point started: ret=0 14:00:12 point_skyscan result=0 14:00:13 Check angles 14:00:13 SkyScan query 14:00:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.725<-21515 Statuses=0008 0009 14:00:14 Msec=0 True Az=112.995 Ze=-142.725 Az status=0008 Ze status=0009 14:00:14 Check angles 14:00:14 SkyScan query 14:00:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.74<-20116 Statuses=0008 0009 14:00:14 Msec=750 True Az=112.995 Ze=-121.74 Az status=0008 Ze status=0009 14:00:15 Check angles 14:00:15 SkyScan query 14:00:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.305<-18687 Statuses=0008 0009 14:00:15 Msec=1500 True Az=112.995 Ze=-100.305 Az status=0008 Ze status=0009 14:00:15 Check angles 14:00:15 SkyScan query 14:00:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.32<-17288 Statuses=0008 0009 14:00:16 Msec=2250 True Az=112.995 Ze=-79.32 Az status=0008 Ze status=0009 14:00:16 Check angles 14:00:16 SkyScan query 14:00:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.365<-15891 Statuses=0008 0009 14:00:17 Msec=3000 True Az=112.995 Ze=-58.365 Az status=0008 Ze status=0009 14:00:17 Check angles 14:00:17 SkyScan query 14:00:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.455<-14497 Statuses=0008 0009 14:00:17 Msec=3750 True Az=112.995 Ze=-37.455 Az status=0008 Ze status=0009 14:00:18 Check angles 14:00:18 SkyScan query 14:00:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.485<-13099 Statuses=0008 0009 14:00:18 Msec=4500 True Az=112.995 Ze=-16.485 Az status=0008 Ze status=0009 14:00:18 Check angles 14:00:18 SkyScan query 14:00:19 SkyScan query done: ret=0 az=113.01<-7534 ze=4.365<-11709 Statuses=0008 0009 14:00:19 Msec=5250 True Az=113.01 Ze=4.365 Az status=0008 Ze status=0009 14:00:19 Check angles 14:00:19 SkyScan query 14:00:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:00:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:00:20 Message to Master queued w/err=0: serial=126093 error=0 14:00:25 Received message from Master: op=Filter serial=126094 14:00:25 Color wheel filter change from 0 to 0 14:00:25 FLIGetFilterPos err=0 currentPosition=0 14:00:25 FLIGetStepsRemaining err=0 RemainingSteps=0 14:00:25 Filter is already there-color wheel unchanged 14:00:25 Received message from Master: op=Shutter serial=126095 14:00:25 Shutter LASER close 14:00:25 Received message from Camera: op=State serial=126097 14:00:25 GetSingleValue result=40 Value=cccccccc 14:00:25 SkyScan query 14:00:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:00:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:26 Parameters OK 14:00:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:26 Set A/D data flow result=40 14:00:26 Set A/D channel type result=40 14:00:26 Set A/D encoding result=40 14:00:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:26 Set channel filter=0.000000e+000 result=40 14:00:26 Config A/D Result=40 14:00:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:26 Get A/D filter: -9.255963e+061 result=40 14:00:26 Get A/D value=-858993460 result=40 14:00:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:26 Parameters OK 14:00:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:26 Set A/D data flow result=40 14:00:26 Set A/D channel type result=40 14:00:26 Set A/D encoding result=40 14:00:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:26 Set channel filter=0.000000e+000 result=40 14:00:26 Config A/D Result=40 14:00:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:26 Get A/D filter: -9.255963e+061 result=40 14:00:26 Get A/D value=-858993460 result=40 14:00:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:00:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:00:26 Aux= 14:00:26 Message to Camera, serial 126097 queued 14:01:02 Received message from Master: op=PointingHead serial=126110 14:01:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:01:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:01:03 Point started: ret=0 14:01:03 point_skyscan result=0 14:01:04 Check angles 14:01:04 SkyScan query 14:01:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:01:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:01:04 Message to Master queued w/err=0: serial=126110 error=0 14:01:09 Received message from Master: op=Filter serial=126111 14:01:09 Color wheel filter change from 0 to 0 14:01:09 FLIGetFilterPos err=0 currentPosition=0 14:01:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:01:09 Filter is already there-color wheel unchanged 14:01:09 Received message from Master: op=Shutter serial=126112 14:01:09 Shutter LASER close 14:01:09 Received message from Camera: op=State serial=126114 14:01:09 GetSingleValue result=40 Value=cccccccc 14:01:09 SkyScan query 14:01:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:01:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:10 Parameters OK 14:01:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:10 Set A/D data flow result=40 14:01:10 Set A/D channel type result=40 14:01:10 Set A/D encoding result=40 14:01:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:10 Set channel filter=0.000000e+000 result=40 14:01:10 Config A/D Result=40 14:01:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:10 Get A/D filter: -9.255963e+061 result=40 14:01:10 Get A/D value=-858993460 result=40 14:01:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:10 Parameters OK 14:01:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:10 Set A/D data flow result=40 14:01:10 Set A/D channel type result=40 14:01:10 Set A/D encoding result=40 14:01:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:10 Set channel filter=0.000000e+000 result=40 14:01:10 Config A/D Result=40 14:01:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:10 Get A/D filter: -9.255963e+061 result=40 14:01:10 Get A/D value=-858993460 result=40 14:01:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:01:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:01:10 Aux= 14:01:10 Message to Camera, serial 126114 queued 14:01:47 Received message from Master: op=PointingHead serial=126127 14:01:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:01:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:01:47 Point started: ret=0 14:01:47 point_skyscan result=0 14:01:48 Check angles 14:01:48 SkyScan query 14:01:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:01:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:01:48 Message to Master queued w/err=0: serial=126127 error=0 14:01:53 Received message from Master: op=Filter serial=126128 14:01:53 Color wheel filter change from 0 to 0 14:01:53 FLIGetFilterPos err=0 currentPosition=0 14:01:53 FLIGetStepsRemaining err=0 RemainingSteps=0 14:01:53 Filter is already there-color wheel unchanged 14:01:54 Received message from Master: op=Shutter serial=126129 14:01:54 Shutter LASER close 14:01:54 Received message from Camera: op=State serial=126131 14:01:54 GetSingleValue result=40 Value=cccccccc 14:01:54 SkyScan query 14:01:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:01:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:54 Parameters OK 14:01:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:54 Set A/D data flow result=40 14:01:54 Set A/D channel type result=40 14:01:54 Set A/D encoding result=40 14:01:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:54 Set channel filter=0.000000e+000 result=40 14:01:54 Config A/D Result=40 14:01:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:54 Get A/D filter: -9.255963e+061 result=40 14:01:54 Get A/D value=-858993460 result=40 14:01:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:54 Parameters OK 14:01:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:54 Set A/D data flow result=40 14:01:54 Set A/D channel type result=40 14:01:54 Set A/D encoding result=40 14:01:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:54 Set channel filter=0.000000e+000 result=40 14:01:54 Config A/D Result=40 14:01:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:54 Get A/D filter: -9.255963e+061 result=40 14:01:54 Get A/D value=-858993460 result=40 14:01:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:01:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:01:54 Aux= 14:01:54 Message to Camera, serial 126131 queued 14:02:31 Received message from Master: op=PointingHead serial=126144 14:02:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:02:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:02:31 Point started: ret=0 14:02:31 point_skyscan result=0 14:02:32 Check angles 14:02:32 SkyScan query 14:02:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:02:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:02:33 Message to Master queued w/err=0: serial=126144 error=0 14:02:38 Received message from Master: op=Filter serial=126145 14:02:38 Color wheel filter change from 0 to 0 14:02:38 FLIGetFilterPos err=0 currentPosition=0 14:02:38 FLIGetStepsRemaining err=0 RemainingSteps=0 14:02:38 Filter is already there-color wheel unchanged 14:02:38 Received message from Master: op=Shutter serial=126146 14:02:38 Shutter LASER close 14:02:38 Received message from Camera: op=State serial=126148 14:02:38 GetSingleValue result=40 Value=cccccccc 14:02:38 SkyScan query 14:02:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:02:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:38 Parameters OK 14:02:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:38 Set A/D data flow result=40 14:02:38 Set A/D channel type result=40 14:02:38 Set A/D encoding result=40 14:02:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:38 Set channel filter=0.000000e+000 result=40 14:02:38 Config A/D Result=40 14:02:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:38 Get A/D filter: -9.255963e+061 result=40 14:02:38 Get A/D value=-858993460 result=40 14:02:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:38 Parameters OK 14:02:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:38 Set A/D data flow result=40 14:02:38 Set A/D channel type result=40 14:02:38 Set A/D encoding result=40 14:02:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:38 Set channel filter=0.000000e+000 result=40 14:02:38 Config A/D Result=40 14:02:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:38 Get A/D filter: -9.255963e+061 result=40 14:02:38 Get A/D value=-858993460 result=40 14:02:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:02:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:02:38 Aux= 14:02:38 Message to Camera, serial 126148 queued 14:03:15 Received message from Master: op=PointingHead serial=126161 14:03:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:03:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:03:16 Point started: ret=0 14:03:16 point_skyscan result=0 14:03:16 Check angles 14:03:16 SkyScan query 14:03:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.19<-13546 Statuses=0008 0009 14:03:17 Msec=0 True Az=112.995 Ze=-23.19 Az status=0008 Ze status=0009 14:03:17 Check angles 14:03:17 SkyScan query 14:03:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.52<-14968 Statuses=0008 0009 14:03:18 Msec=750 True Az=112.995 Ze=-44.52 Az status=0008 Ze status=0009 14:03:18 Check angles 14:03:18 SkyScan query 14:03:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.46<-16364 Statuses=0008 0009 14:03:19 Msec=1500 True Az=112.995 Ze=-65.46 Az status=0008 Ze status=0009 14:03:19 Check angles 14:03:19 SkyScan query 14:03:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.43<-17762 Statuses=0008 0009 14:03:19 Msec=2250 True Az=112.995 Ze=-86.43 Az status=0008 Ze status=0009 14:03:19 Check angles 14:03:19 SkyScan query 14:03:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.385<-19159 Statuses=0008 0009 14:03:20 Msec=3000 True Az=112.995 Ze=-107.385 Az status=0008 Ze status=0009 14:03:20 Check angles 14:03:20 SkyScan query 14:03:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.34<-20556 Statuses=0008 0009 14:03:21 Msec=3750 True Az=112.995 Ze=-128.34 Az status=0008 Ze status=0009 14:03:21 Check angles 14:03:21 SkyScan query 14:03:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.34<-21956 Statuses=0008 0009 14:03:22 Msec=4500 True Az=112.995 Ze=-149.34 Az status=0008 Ze status=0009 14:03:22 Check angles 14:03:22 SkyScan query 14:03:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.28<-23352 Statuses=0008 0009 14:03:22 Msec=5250 True Az=112.995 Ze=-170.28 Az status=0008 Ze status=0009 14:03:22 Check angles 14:03:22 SkyScan query 14:03:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:03:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:03:23 Message to Master queued w/err=0: serial=126161 error=0 14:03:28 Received message from Master: op=Filter serial=126162 14:03:28 Color wheel filter change from 0 to 0 14:03:28 FLIGetFilterPos err=0 currentPosition=0 14:03:28 FLIGetStepsRemaining err=0 RemainingSteps=0 14:03:28 Filter is already there-color wheel unchanged 14:03:28 Received message from Master: op=Shutter serial=126163 14:03:28 Shutter LASER open 14:03:28 Received message from Camera: op=State serial=126165 14:03:28 GetSingleValue result=40 Value=cccccccc 14:03:28 SkyScan query 14:03:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:03:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:29 Parameters OK 14:03:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:29 Set A/D data flow result=40 14:03:29 Set A/D channel type result=40 14:03:29 Set A/D encoding result=40 14:03:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:29 Set channel filter=0.000000e+000 result=40 14:03:29 Config A/D Result=40 14:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:29 Get A/D filter: -9.255963e+061 result=40 14:03:29 Get A/D value=-858993460 result=40 14:03:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:29 Parameters OK 14:03:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:29 Set A/D data flow result=40 14:03:29 Set A/D channel type result=40 14:03:29 Set A/D encoding result=40 14:03:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:29 Set channel filter=0.000000e+000 result=40 14:03:29 Config A/D Result=40 14:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:29 Get A/D filter: -9.255963e+061 result=40 14:03:29 Get A/D value=-858993460 result=40 14:03:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:03:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:03:29 Aux= 14:03:29 Message to Camera, serial 126165 queued 14:03:37 Received message from Master: op=Shutter serial=126175 14:03:37 Shutter LASER close 14:03:38 Received message from Master: op=Identify serial=126179 14:03:38 Received message from Master: op=PointingHead serial=126182 14:03:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:03:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:03:38 Point started: ret=0 14:03:38 point_skyscan result=0 14:03:39 Check angles 14:03:39 SkyScan query 14:03:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 14:03:40 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 14:03:40 Check angles 14:03:40 SkyScan query 14:03:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.46<-20164 Statuses=0008 0009 14:03:40 Msec=750 True Az=112.995 Ze=-122.46 Az status=0008 Ze status=0009 14:03:41 Check angles 14:03:41 SkyScan query 14:03:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.52<-18768 Statuses=0008 0009 14:03:41 Msec=1500 True Az=112.995 Ze=-101.52 Az status=0008 Ze status=0009 14:03:41 Check angles 14:03:41 SkyScan query 14:03:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.55<-17370 Statuses=0008 0009 14:03:42 Msec=2250 True Az=112.995 Ze=-80.55 Az status=0008 Ze status=0009 14:03:42 Check angles 14:03:42 SkyScan query 14:03:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.61<-15974 Statuses=0008 0009 14:03:43 Msec=3000 True Az=112.995 Ze=-59.61 Az status=0008 Ze status=0009 14:03:43 Check angles 14:03:43 SkyScan query 14:03:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.64<-14576 Statuses=0008 0009 14:03:43 Msec=3750 True Az=112.995 Ze=-38.64 Az status=0008 Ze status=0009 14:03:44 Check angles 14:03:44 SkyScan query 14:03:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.685<-13179 Statuses=0008 0009 14:03:44 Msec=4500 True Az=112.995 Ze=-17.685 Az status=0008 Ze status=0009 14:03:44 Check angles 14:03:44 SkyScan query 14:03:45 SkyScan query done: ret=0 az=112.995<-7533 ze=3.78<-11748 Statuses=0008 0009 14:03:45 Msec=5250 True Az=112.995 Ze=3.78 Az status=0008 Ze status=0009 14:03:45 Check angles 14:03:45 SkyScan query 14:03:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:03:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:03:46 Message to Master queued w/err=0: serial=126182 error=0 [UTC 2019-3-5 14:03:50] 14:03:51 Received message from Master: op=Filter serial=126183 14:03:51 Color wheel filter change from 0 to 0 14:03:51 FLIGetFilterPos err=0 currentPosition=0 14:03:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:03:51 Filter is already there-color wheel unchanged 14:03:51 Received message from Master: op=Shutter serial=126184 14:03:51 Shutter LASER close 14:03:51 Received message from Camera: op=State serial=126186 14:03:51 GetSingleValue result=40 Value=cccccccc 14:03:51 SkyScan query 14:03:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:03:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:52 Parameters OK 14:03:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:52 Set A/D data flow result=40 14:03:52 Set A/D channel type result=40 14:03:52 Set A/D encoding result=40 14:03:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:52 Set channel filter=0.000000e+000 result=40 14:03:52 Config A/D Result=40 14:03:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:52 Get A/D filter: -9.255963e+061 result=40 14:03:52 Get A/D value=-858993460 result=40 14:03:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:52 Parameters OK 14:03:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:52 Set A/D data flow result=40 14:03:52 Set A/D channel type result=40 14:03:52 Set A/D encoding result=40 14:03:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:52 Set channel filter=0.000000e+000 result=40 14:03:52 Config A/D Result=40 14:03:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:52 Get A/D filter: -9.255963e+061 result=40 14:03:52 Get A/D value=-858993460 result=40 14:03:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:03:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:03:52 Aux= 14:03:52 Message to Camera, serial 126186 queued 14:04:28 Received message from Master: op=PointingHead serial=126199 14:04:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:04:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:04:29 Point started: ret=0 14:04:29 point_skyscan result=0 14:04:30 Check angles 14:04:30 SkyScan query 14:04:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:04:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:04:30 Message to Master queued w/err=0: serial=126199 error=0 14:04:35 Received message from Master: op=Filter serial=126200 14:04:35 Color wheel filter change from 0 to 0 14:04:35 FLIGetFilterPos err=0 currentPosition=0 14:04:35 FLIGetStepsRemaining err=0 RemainingSteps=0 14:04:35 Filter is already there-color wheel unchanged 14:04:35 Received message from Master: op=Shutter serial=126201 14:04:35 Shutter LASER close 14:04:35 Received message from Camera: op=State serial=126203 14:04:35 GetSingleValue result=40 Value=cccccccc 14:04:35 SkyScan query 14:04:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:04:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:36 Parameters OK 14:04:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:36 Set A/D data flow result=40 14:04:36 Set A/D channel type result=40 14:04:36 Set A/D encoding result=40 14:04:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:36 Set channel filter=0.000000e+000 result=40 14:04:36 Config A/D Result=40 14:04:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:36 Get A/D filter: -9.255963e+061 result=40 14:04:36 Get A/D value=-858993460 result=40 14:04:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:36 Parameters OK 14:04:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:36 Set A/D data flow result=40 14:04:36 Set A/D channel type result=40 14:04:36 Set A/D encoding result=40 14:04:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:36 Set channel filter=0.000000e+000 result=40 14:04:36 Config A/D Result=40 14:04:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:36 Get A/D filter: -9.255963e+061 result=40 14:04:36 Get A/D value=-858993460 result=40 14:04:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:04:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:04:36 Aux= 14:04:36 Message to Camera, serial 126203 queued 14:05:13 Received message from Master: op=PointingHead serial=126216 14:05:13 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:05:13 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:05:13 Point started: ret=0 14:05:13 point_skyscan result=0 14:05:14 Check angles 14:05:14 SkyScan query 14:05:14 SkyScan query done: ret=0 az=136.2<-9080 ze=-6.51<-12434 Statuses=0009 0008 14:05:14 Msec=0 True Az=136.2 Ze=-6.51 Az status=0009 Ze status=0008 14:05:15 Check angles 14:05:15 SkyScan query 14:05:15 SkyScan query done: ret=0 az=154.125<-10275 ze=-6.495<-12433 Statuses=0009 0008 14:05:15 Msec=750 True Az=154.125 Ze=-6.495 Az status=0009 Ze status=0008 14:05:15 Check angles 14:05:15 SkyScan query 14:05:16 SkyScan query done: ret=0 az=171.51<-11434 ze=-6.495<-12433 Statuses=0009 0008 14:05:16 Msec=1500 True Az=171.51 Ze=-6.495 Az status=0009 Ze status=0008 14:05:16 Check angles 14:05:16 SkyScan query 14:05:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:05:17 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:05:17 Message to Master queued w/err=0: serial=126216 error=0 14:05:22 Received message from Master: op=Filter serial=126217 14:05:22 Color wheel filter change from 0 to 0 14:05:22 FLIGetFilterPos err=0 currentPosition=0 14:05:22 FLIGetStepsRemaining err=0 RemainingSteps=0 14:05:22 Filter is already there-color wheel unchanged 14:05:22 Received message from Master: op=Shutter serial=126218 14:05:22 Shutter LASER close 14:05:22 Received message from Camera: op=State serial=126220 14:05:22 GetSingleValue result=40 Value=cccccccc 14:05:22 SkyScan query 14:05:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:05:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:22 Parameters OK 14:05:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:22 Set A/D data flow result=40 14:05:22 Set A/D channel type result=40 14:05:22 Set A/D encoding result=40 14:05:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:22 Set channel filter=0.000000e+000 result=40 14:05:22 Config A/D Result=40 14:05:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:22 Get A/D filter: -9.255963e+061 result=40 14:05:22 Get A/D value=-858993460 result=40 14:05:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:22 Parameters OK 14:05:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:22 Set A/D data flow result=40 14:05:22 Set A/D channel type result=40 14:05:22 Set A/D encoding result=40 14:05:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:22 Set channel filter=0.000000e+000 result=40 14:05:22 Config A/D Result=40 14:05:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:22 Get A/D filter: -9.255963e+061 result=40 14:05:22 Get A/D value=-858993460 result=40 14:05:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:05:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:05:22 Aux= 14:05:22 Message to Camera, serial 126220 queued 14:05:59 Received message from Master: op=PointingHead serial=126233 14:05:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:05:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:06:00 Point started: ret=0 14:06:00 point_skyscan result=0 14:06:00 Check angles 14:06:00 SkyScan query 14:06:01 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 14:06:01 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 14:06:01 Check angles 14:06:01 SkyScan query 14:06:02 SkyScan query done: ret=0 az=135.36<-9024 ze=6.495<-11567 Statuses=0009 0008 14:06:02 Msec=750 True Az=135.36 Ze=6.495 Az status=0009 Ze status=0008 14:06:02 Check angles 14:06:02 SkyScan query 14:06:02 SkyScan query done: ret=0 az=117.9<-7860 ze=6.495<-11567 Statuses=0009 0008 14:06:02 Msec=1500 True Az=117.9 Ze=6.495 Az status=0009 Ze status=0008 14:06:03 Check angles 14:06:03 SkyScan query 14:06:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:06:03 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:06:03 Message to Master queued w/err=0: serial=126233 error=0 14:06:08 Received message from Master: op=Filter serial=126234 14:06:08 Color wheel filter change from 0 to 0 14:06:08 FLIGetFilterPos err=0 currentPosition=0 14:06:08 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:08 Filter is already there-color wheel unchanged 14:06:08 Received message from Master: op=Shutter serial=126235 14:06:08 Shutter LASER close 14:06:08 Received message from Camera: op=State serial=126237 14:06:08 GetSingleValue result=40 Value=cccccccc 14:06:08 SkyScan query 14:06:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:06:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:09 Parameters OK 14:06:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:09 Set A/D data flow result=40 14:06:09 Set A/D channel type result=40 14:06:09 Set A/D encoding result=40 14:06:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:09 Set channel filter=0.000000e+000 result=40 14:06:09 Config A/D Result=40 14:06:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:09 Get A/D filter: -9.255963e+061 result=40 14:06:09 Get A/D value=-858993460 result=40 14:06:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:09 Parameters OK 14:06:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:09 Set A/D data flow result=40 14:06:09 Set A/D channel type result=40 14:06:09 Set A/D encoding result=40 14:06:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:09 Set channel filter=0.000000e+000 result=40 14:06:09 Config A/D Result=40 14:06:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:09 Get A/D filter: -9.255963e+061 result=40 14:06:09 Get A/D value=-858993460 result=40 14:06:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:09 Aux= 14:06:09 Message to Camera, serial 126237 queued 14:06:46 Received message from Master: op=PointingHead serial=126250 14:06:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:06:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:06:46 Point started: ret=0 14:06:46 point_skyscan result=0 14:06:47 Check angles 14:06:47 SkyScan query 14:06:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.505<-13567 Statuses=0008 0009 14:06:47 Msec=0 True Az=112.995 Ze=-23.505 Az status=0008 Ze status=0009 14:06:48 Check angles 14:06:48 SkyScan query 14:06:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.43<-14962 Statuses=0008 0009 14:06:48 Msec=750 True Az=112.995 Ze=-44.43 Az status=0008 Ze status=0009 14:06:48 Check angles 14:06:48 SkyScan query 14:06:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 14:06:49 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 14:06:49 Check angles 14:06:49 SkyScan query 14:06:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.79<-17786 Statuses=0008 0009 14:06:50 Msec=2250 True Az=112.995 Ze=-86.79 Az status=0008 Ze status=0009 14:06:50 Check angles 14:06:50 SkyScan query 14:06:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.24<-19216 Statuses=0008 0009 14:06:51 Msec=3000 True Az=112.995 Ze=-108.24 Az status=0008 Ze status=0009 14:06:51 Check angles 14:06:51 SkyScan query 14:06:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.165<-20611 Statuses=0008 0009 14:06:51 Msec=3750 True Az=112.995 Ze=-129.165 Az status=0008 Ze status=0009 14:06:51 Check angles 14:06:51 SkyScan query 14:06:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.105<-22007 Statuses=0008 0009 14:06:52 Msec=4500 True Az=112.995 Ze=-150.105 Az status=0008 Ze status=0009 14:06:52 Check angles 14:06:52 SkyScan query 14:06:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.94<-23396 Statuses=0008 0009 14:06:53 Msec=5250 True Az=112.995 Ze=-170.94 Az status=0008 Ze status=0009 14:06:53 Check angles 14:06:53 SkyScan query 14:06:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:06:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:06:54 Message to Master queued w/err=0: serial=126250 error=0 14:06:59 Received message from Master: op=Filter serial=126251 14:06:59 Color wheel filter change from 0 to 0 14:06:59 FLIGetFilterPos err=0 currentPosition=0 14:06:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:59 Filter is already there-color wheel unchanged 14:06:59 Received message from Master: op=Shutter serial=126252 14:06:59 Shutter LASER open 14:06:59 Received message from Camera: op=State serial=126254 14:06:59 GetSingleValue result=40 Value=cccccccc 14:06:59 SkyScan query 14:06:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:06:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:59 Parameters OK 14:06:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:59 Set A/D data flow result=40 14:06:59 Set A/D channel type result=40 14:06:59 Set A/D encoding result=40 14:06:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:59 Set channel filter=0.000000e+000 result=40 14:06:59 Config A/D Result=40 14:06:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:59 Get A/D filter: -9.255963e+061 result=40 14:06:59 Get A/D value=-858993460 result=40 14:06:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:59 Parameters OK 14:06:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:59 Set A/D data flow result=40 14:06:59 Set A/D channel type result=40 14:06:59 Set A/D encoding result=40 14:06:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:59 Set channel filter=0.000000e+000 result=40 14:06:59 Config A/D Result=40 14:06:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:59 Get A/D filter: -9.255963e+061 result=40 14:06:59 Get A/D value=-858993460 result=40 14:06:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:59 Aux= 14:06:59 Message to Camera, serial 126254 queued 14:07:08 Received message from Master: op=Shutter serial=126264 14:07:08 Shutter LASER close 14:07:08 Received message from Master: op=PointingHead serial=126268 14:07:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:07:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:07:09 Point started: ret=0 14:07:09 point_skyscan result=0 14:07:09 Check angles 14:07:09 SkyScan query 14:07:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.785<-21519 Statuses=0008 0009 14:07:10 Msec=0 True Az=112.995 Ze=-142.785 Az status=0008 Ze status=0009 14:07:10 Check angles 14:07:10 SkyScan query 14:07:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.365<-20091 Statuses=0008 0009 14:07:11 Msec=750 True Az=112.995 Ze=-121.365 Az status=0008 Ze status=0009 14:07:11 Check angles 14:07:11 SkyScan query 14:07:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.365<-18691 Statuses=0008 0009 14:07:12 Msec=1500 True Az=112.995 Ze=-100.365 Az status=0008 Ze status=0009 14:07:12 Check angles 14:07:12 SkyScan query 14:07:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.38<-17292 Statuses=0008 0009 14:07:12 Msec=2250 True Az=112.995 Ze=-79.38 Az status=0008 Ze status=0009 14:07:12 Check angles 14:07:12 SkyScan query 14:07:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.44<-15896 Statuses=0008 0009 14:07:13 Msec=3000 True Az=112.995 Ze=-58.44 Az status=0008 Ze status=0009 14:07:13 Check angles 14:07:13 SkyScan query 14:07:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.515<-14501 Statuses=0008 0009 14:07:14 Msec=3750 True Az=112.995 Ze=-37.515 Az status=0008 Ze status=0009 14:07:14 Check angles 14:07:14 SkyScan query 14:07:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.56<-13104 Statuses=0008 0009 14:07:15 Msec=4500 True Az=112.995 Ze=-16.56 Az status=0008 Ze status=0009 14:07:15 Check angles 14:07:15 SkyScan query 14:07:15 SkyScan query done: ret=0 az=113.01<-7534 ze=4.305<-11713 Statuses=0008 0009 14:07:15 Msec=5250 True Az=113.01 Ze=4.305 Az status=0008 Ze status=0009 14:07:15 Check angles 14:07:15 SkyScan query 14:07:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:07:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:07:16 Message to Master queued w/err=0: serial=126268 error=0 14:07:21 Received message from Master: op=Filter serial=126269 14:07:21 Color wheel filter change from 0 to 0 14:07:21 FLIGetFilterPos err=0 currentPosition=0 14:07:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:07:21 Filter is already there-color wheel unchanged 14:07:21 Received message from Master: op=Shutter serial=126270 14:07:21 Shutter LASER close 14:07:21 Received message from Camera: op=State serial=126272 14:07:21 GetSingleValue result=40 Value=cccccccc 14:07:21 SkyScan query 14:07:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:07:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:22 Parameters OK 14:07:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:22 Set A/D data flow result=40 14:07:22 Set A/D channel type result=40 14:07:22 Set A/D encoding result=40 14:07:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:22 Set channel filter=0.000000e+000 result=40 14:07:22 Config A/D Result=40 14:07:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:22 Get A/D filter: -9.255963e+061 result=40 14:07:22 Get A/D value=-858993460 result=40 14:07:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:22 Parameters OK 14:07:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:22 Set A/D data flow result=40 14:07:22 Set A/D channel type result=40 14:07:22 Set A/D encoding result=40 14:07:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:22 Set channel filter=0.000000e+000 result=40 14:07:22 Config A/D Result=40 14:07:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:22 Get A/D filter: -9.255963e+061 result=40 14:07:22 Get A/D value=-858993460 result=40 14:07:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:07:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:07:22 Aux= 14:07:22 Message to Camera, serial 126272 queued 14:07:59 Received message from Master: op=PointingHead serial=126285 14:07:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:07:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:07:59 Point started: ret=0 14:07:59 point_skyscan result=0 14:08:00 Check angles 14:08:00 SkyScan query 14:08:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:08:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:08:01 Message to Master queued w/err=0: serial=126285 error=0 14:08:06 Received message from Master: op=Filter serial=126286 14:08:06 Color wheel filter change from 0 to 0 14:08:06 FLIGetFilterPos err=0 currentPosition=0 14:08:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:08:06 Filter is already there-color wheel unchanged 14:08:06 Received message from Master: op=Shutter serial=126287 14:08:06 Shutter LASER close 14:08:06 Received message from Camera: op=State serial=126289 14:08:06 GetSingleValue result=40 Value=cccccccc 14:08:06 SkyScan query 14:08:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:08:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:06 Parameters OK 14:08:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:06 Set A/D data flow result=40 14:08:06 Set A/D channel type result=40 14:08:06 Set A/D encoding result=40 14:08:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:06 Set channel filter=0.000000e+000 result=40 14:08:06 Config A/D Result=40 14:08:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:06 Get A/D filter: -9.255963e+061 result=40 14:08:06 Get A/D value=-858993460 result=40 14:08:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:06 Parameters OK 14:08:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:06 Set A/D data flow result=40 14:08:06 Set A/D channel type result=40 14:08:06 Set A/D encoding result=40 14:08:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:06 Set channel filter=0.000000e+000 result=40 14:08:06 Config A/D Result=40 14:08:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:06 Get A/D filter: -9.255963e+061 result=40 14:08:06 Get A/D value=-858993460 result=40 14:08:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:06 Aux= 14:08:06 Message to Camera, serial 126289 queued 14:08:43 Received message from Master: op=PointingHead serial=126302 14:08:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:08:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:08:44 Point started: ret=0 14:08:44 point_skyscan result=0 14:08:44 Check angles 14:08:44 SkyScan query 14:08:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:08:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:08:45 Message to Master queued w/err=0: serial=126302 error=0 14:08:50 Received message from Master: op=Filter serial=126303 14:08:50 Color wheel filter change from 0 to 0 14:08:50 FLIGetFilterPos err=0 currentPosition=0 14:08:50 FLIGetStepsRemaining err=0 RemainingSteps=0 14:08:50 Filter is already there-color wheel unchanged 14:08:50 Received message from Master: op=Shutter serial=126304 14:08:50 Shutter LASER close 14:08:50 Received message from Camera: op=State serial=126306 14:08:50 GetSingleValue result=40 Value=cccccccc 14:08:50 SkyScan query 14:08:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:08:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:51 Parameters OK 14:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:51 Set A/D data flow result=40 14:08:51 Set A/D channel type result=40 14:08:51 Set A/D encoding result=40 14:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:51 Set channel filter=0.000000e+000 result=40 14:08:51 Config A/D Result=40 14:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:51 Get A/D filter: -9.255963e+061 result=40 14:08:51 Get A/D value=-858993460 result=40 14:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:51 Parameters OK 14:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:51 Set A/D data flow result=40 14:08:51 Set A/D channel type result=40 14:08:51 Set A/D encoding result=40 14:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:51 Set channel filter=0.000000e+000 result=40 14:08:51 Config A/D Result=40 14:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:51 Get A/D filter: -9.255963e+061 result=40 14:08:51 Get A/D value=-858993460 result=40 14:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:51 Aux= 14:08:51 Message to Camera, serial 126306 queued 14:09:27 Received message from Master: op=PointingHead serial=126319 14:09:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:09:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:09:28 Point started: ret=0 14:09:28 point_skyscan result=0 14:09:29 Check angles 14:09:29 SkyScan query 14:09:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:09:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:09:29 Message to Master queued w/err=0: serial=126319 error=0 14:09:34 Received message from Master: op=Filter serial=126320 14:09:34 Color wheel filter change from 0 to 0 14:09:34 FLIGetFilterPos err=0 currentPosition=0 14:09:34 FLIGetStepsRemaining err=0 RemainingSteps=0 14:09:34 Filter is already there-color wheel unchanged 14:09:34 Received message from Master: op=Shutter serial=126321 14:09:34 Shutter LASER close 14:09:34 Received message from Camera: op=State serial=126323 14:09:34 GetSingleValue result=40 Value=cccccccc 14:09:34 SkyScan query 14:09:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:09:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:35 Parameters OK 14:09:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:35 Set A/D data flow result=40 14:09:35 Set A/D channel type result=40 14:09:35 Set A/D encoding result=40 14:09:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:35 Set channel filter=0.000000e+000 result=40 14:09:35 Config A/D Result=40 14:09:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:35 Get A/D filter: -9.255963e+061 result=40 14:09:35 Get A/D value=-858993460 result=40 14:09:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:35 Parameters OK 14:09:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:35 Set A/D data flow result=40 14:09:35 Set A/D channel type result=40 14:09:35 Set A/D encoding result=40 14:09:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:35 Set channel filter=0.000000e+000 result=40 14:09:35 Config A/D Result=40 14:09:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:35 Get A/D filter: -9.255963e+061 result=40 14:09:35 Get A/D value=-858993460 result=40 14:09:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:09:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:09:35 Aux= 14:09:35 Message to Camera, serial 126323 queued 14:10:12 Received message from Master: op=PointingHead serial=126336 14:10:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:10:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:10:12 Point started: ret=0 14:10:12 point_skyscan result=0 14:10:13 Check angles 14:10:13 SkyScan query 14:10:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 14:10:13 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 14:10:14 Check angles 14:10:14 SkyScan query 14:10:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 14:10:14 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 14:10:14 Check angles 14:10:14 SkyScan query 14:10:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.985<-16399 Statuses=0008 0009 14:10:15 Msec=1500 True Az=112.995 Ze=-65.985 Az status=0008 Ze status=0009 14:10:15 Check angles 14:10:15 SkyScan query 14:10:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.955<-17797 Statuses=0008 0009 14:10:16 Msec=2250 True Az=112.995 Ze=-86.955 Az status=0008 Ze status=0009 14:10:16 Check angles 14:10:16 SkyScan query 14:10:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.925<-19195 Statuses=0008 0009 14:10:16 Msec=3000 True Az=112.995 Ze=-107.925 Az status=0008 Ze status=0009 14:10:17 Check angles 14:10:17 SkyScan query 14:10:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.88<-20592 Statuses=0008 0009 14:10:17 Msec=3750 True Az=112.995 Ze=-128.88 Az status=0008 Ze status=0009 14:10:17 Check angles 14:10:17 SkyScan query 14:10:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.85<-21990 Statuses=0008 0009 14:10:18 Msec=4500 True Az=112.995 Ze=-149.85 Az status=0008 Ze status=0009 14:10:18 Check angles 14:10:18 SkyScan query 14:10:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.745<-23383 Statuses=0008 0009 14:10:19 Msec=5250 True Az=112.995 Ze=-170.745 Az status=0008 Ze status=0009 14:10:19 Check angles 14:10:19 SkyScan query 14:10:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:10:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:10:19 Message to Master queued w/err=0: serial=126336 error=0 14:10:24 Received message from Master: op=Filter serial=126337 14:10:24 Color wheel filter change from 0 to 0 14:10:24 FLIGetFilterPos err=0 currentPosition=0 14:10:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:10:24 Filter is already there-color wheel unchanged 14:10:25 Received message from Master: op=Shutter serial=126338 14:10:25 Shutter LASER open 14:10:25 Received message from Camera: op=State serial=126340 14:10:25 GetSingleValue result=40 Value=cccccccc 14:10:25 SkyScan query 14:10:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:10:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:25 Parameters OK 14:10:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:25 Set A/D data flow result=40 14:10:25 Set A/D channel type result=40 14:10:25 Set A/D encoding result=40 14:10:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:25 Set channel filter=0.000000e+000 result=40 14:10:25 Config A/D Result=40 14:10:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:25 Get A/D filter: -9.255963e+061 result=40 14:10:25 Get A/D value=-858993460 result=40 14:10:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:25 Parameters OK 14:10:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:25 Set A/D data flow result=40 14:10:25 Set A/D channel type result=40 14:10:25 Set A/D encoding result=40 14:10:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:25 Set channel filter=0.000000e+000 result=40 14:10:25 Config A/D Result=40 14:10:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:25 Get A/D filter: -9.255963e+061 result=40 14:10:25 Get A/D value=-858993460 result=40 14:10:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:10:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:10:25 Aux= 14:10:25 Message to Camera, serial 126340 queued 14:10:34 Received message from Master: op=Shutter serial=126350 14:10:34 Shutter LASER close 14:10:34 Received message from Master: op=PointingHead serial=126354 14:10:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:10:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:10:35 Point started: ret=0 14:10:35 point_skyscan result=0 14:10:36 Check angles 14:10:36 SkyScan query 14:10:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.1<-21540 Statuses=0008 0009 14:10:36 Msec=0 True Az=112.995 Ze=-143.1 Az status=0008 Ze status=0009 14:10:36 Check angles 14:10:36 SkyScan query 14:10:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.115<-20141 Statuses=0008 0009 14:10:37 Msec=750 True Az=112.995 Ze=-122.115 Az status=0008 Ze status=0009 14:10:37 Check angles 14:10:37 SkyScan query 14:10:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 14:10:38 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 14:10:38 Check angles 14:10:38 SkyScan query 14:10:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 14:10:38 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 14:10:39 Check angles 14:10:39 SkyScan query 14:10:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.265<-15951 Statuses=0008 0009 14:10:39 Msec=3000 True Az=112.995 Ze=-59.265 Az status=0008 Ze status=0009 14:10:39 Check angles 14:10:39 SkyScan query 14:10:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.785<-14519 Statuses=0008 0009 14:10:40 Msec=3750 True Az=112.995 Ze=-37.785 Az status=0008 Ze status=0009 14:10:40 Check angles 14:10:40 SkyScan query 14:10:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.83<-13122 Statuses=0008 0009 14:10:41 Msec=4500 True Az=112.995 Ze=-16.83 Az status=0008 Ze status=0009 14:10:41 Check angles 14:10:41 SkyScan query 14:10:41 SkyScan query done: ret=0 az=112.995<-7533 ze=4.08<-11728 Statuses=0008 0009 14:10:41 Msec=5250 True Az=112.995 Ze=4.08 Az status=0008 Ze status=0009 14:10:42 Check angles 14:10:42 SkyScan query 14:10:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:10:42 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:10:42 Message to Master queued w/err=0: serial=126354 error=0 14:10:47 Received message from Master: op=Filter serial=126355 14:10:47 Color wheel filter change from 0 to 0 14:10:47 FLIGetFilterPos err=0 currentPosition=0 14:10:47 FLIGetStepsRemaining err=0 RemainingSteps=0 14:10:47 Filter is already there-color wheel unchanged 14:10:47 Received message from Master: op=Shutter serial=126356 14:10:47 Shutter LASER close 14:10:48 Received message from Camera: op=State serial=126358 14:10:48 GetSingleValue result=40 Value=cccccccc 14:10:48 SkyScan query 14:10:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:10:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:48 Parameters OK 14:10:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:48 Set A/D data flow result=40 14:10:48 Set A/D channel type result=40 14:10:48 Set A/D encoding result=40 14:10:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:48 Set channel filter=0.000000e+000 result=40 14:10:48 Config A/D Result=40 14:10:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:48 Get A/D filter: -9.255963e+061 result=40 14:10:48 Get A/D value=-858993460 result=40 14:10:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:48 Parameters OK 14:10:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:48 Set A/D data flow result=40 14:10:48 Set A/D channel type result=40 14:10:48 Set A/D encoding result=40 14:10:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:48 Set channel filter=0.000000e+000 result=40 14:10:48 Config A/D Result=40 14:10:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:48 Get A/D filter: -9.255963e+061 result=40 14:10:48 Get A/D value=-858993460 result=40 14:10:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:10:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:10:48 Aux= 14:10:48 Message to Camera, serial 126358 queued 14:11:25 Received message from Master: op=PointingHead serial=126371 14:11:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:11:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:11:25 Point started: ret=0 14:11:25 point_skyscan result=0 14:11:26 Check angles 14:11:26 SkyScan query 14:11:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:11:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:11:27 Message to Master queued w/err=0: serial=126371 error=0 14:11:32 Received message from Master: op=Filter serial=126372 14:11:32 Color wheel filter change from 0 to 0 14:11:32 FLIGetFilterPos err=0 currentPosition=0 14:11:32 FLIGetStepsRemaining err=0 RemainingSteps=0 14:11:32 Filter is already there-color wheel unchanged 14:11:32 Received message from Master: op=Shutter serial=126373 14:11:32 Shutter LASER close 14:11:32 Received message from Camera: op=State serial=126375 14:11:32 GetSingleValue result=40 Value=cccccccc 14:11:32 SkyScan query 14:11:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:11:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:32 Parameters OK 14:11:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:32 Set A/D data flow result=40 14:11:32 Set A/D channel type result=40 14:11:32 Set A/D encoding result=40 14:11:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:32 Set channel filter=0.000000e+000 result=40 14:11:32 Config A/D Result=40 14:11:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:32 Get A/D filter: -9.255963e+061 result=40 14:11:32 Get A/D value=-858993460 result=40 14:11:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:32 Parameters OK 14:11:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:32 Set A/D data flow result=40 14:11:32 Set A/D channel type result=40 14:11:32 Set A/D encoding result=40 14:11:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:32 Set channel filter=0.000000e+000 result=40 14:11:32 Config A/D Result=40 14:11:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:32 Get A/D filter: -9.255963e+061 result=40 14:11:32 Get A/D value=-858993460 result=40 14:11:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:11:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:11:32 Aux= 14:11:32 Message to Camera, serial 126375 queued 14:12:09 Received message from Master: op=PointingHead serial=126388 14:12:09 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:12:09 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:12:10 Point started: ret=0 14:12:10 point_skyscan result=0 14:12:10 Check angles 14:12:10 SkyScan query 14:12:11 SkyScan query done: ret=0 az=135.75<-9050 ze=-6.51<-12434 Statuses=0009 0008 14:12:11 Msec=0 True Az=135.75 Ze=-6.51 Az status=0009 Ze status=0008 14:12:11 Check angles 14:12:11 SkyScan query 14:12:12 SkyScan query done: ret=0 az=153.225<-10215 ze=-6.495<-12433 Statuses=0009 0008 14:12:12 Msec=750 True Az=153.225 Ze=-6.495 Az status=0009 Ze status=0008 14:12:12 Check angles 14:12:12 SkyScan query 14:12:12 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 14:12:12 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 14:12:13 Check angles 14:12:13 SkyScan query 14:12:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:12:13 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:12:13 Message to Master queued w/err=0: serial=126388 error=0 14:12:18 Received message from Master: op=Filter serial=126389 14:12:18 Color wheel filter change from 0 to 0 14:12:18 FLIGetFilterPos err=0 currentPosition=0 14:12:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:12:18 Filter is already there-color wheel unchanged 14:12:18 Received message from Master: op=Shutter serial=126390 14:12:18 Shutter LASER close 14:12:18 Received message from Camera: op=State serial=126392 14:12:18 GetSingleValue result=40 Value=cccccccc 14:12:18 SkyScan query 14:12:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:12:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:19 Parameters OK 14:12:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:19 Set A/D data flow result=40 14:12:19 Set A/D channel type result=40 14:12:19 Set A/D encoding result=40 14:12:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:19 Set channel filter=0.000000e+000 result=40 14:12:19 Config A/D Result=40 14:12:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:19 Get A/D filter: -9.255963e+061 result=40 14:12:19 Get A/D value=-858993460 result=40 14:12:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:19 Parameters OK 14:12:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:19 Set A/D data flow result=40 14:12:19 Set A/D channel type result=40 14:12:19 Set A/D encoding result=40 14:12:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:19 Set channel filter=0.000000e+000 result=40 14:12:19 Config A/D Result=40 14:12:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:19 Get A/D filter: -9.255963e+061 result=40 14:12:19 Get A/D value=-858993460 result=40 14:12:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:12:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:12:19 Aux= 14:12:19 Message to Camera, serial 126392 queued 14:12:56 Received message from Master: op=PointingHead serial=126405 14:12:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:12:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:12:56 Point started: ret=0 14:12:56 point_skyscan result=0 14:12:57 Check angles 14:12:57 SkyScan query 14:12:58 SkyScan query done: ret=0 az=152.55<-10170 ze=6.51<-11566 Statuses=0009 0008 14:12:58 Msec=0 True Az=152.55 Ze=6.51 Az status=0009 Ze status=0008 14:12:58 Check angles 14:12:58 SkyScan query 14:12:58 SkyScan query done: ret=0 az=135.105<-9007 ze=6.495<-11567 Statuses=0009 0008 14:12:58 Msec=750 True Az=135.105 Ze=6.495 Az status=0009 Ze status=0008 14:12:58 Check angles 14:12:58 SkyScan query 14:12:59 SkyScan query done: ret=0 az=117.615<-7841 ze=6.495<-11567 Statuses=0009 0008 14:12:59 Msec=1500 True Az=117.615 Ze=6.495 Az status=0009 Ze status=0008 14:12:59 Check angles 14:12:59 SkyScan query 14:13:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:13:00 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:13:00 Message to Master queued w/err=0: serial=126405 error=0 14:13:05 Received message from Master: op=Filter serial=126406 14:13:05 Color wheel filter change from 0 to 0 14:13:05 FLIGetFilterPos err=0 currentPosition=0 14:13:05 FLIGetStepsRemaining err=0 RemainingSteps=0 14:13:05 Filter is already there-color wheel unchanged 14:13:05 Received message from Master: op=Shutter serial=126407 14:13:05 Shutter LASER close 14:13:05 Received message from Camera: op=State serial=126409 14:13:05 GetSingleValue result=40 Value=cccccccc 14:13:05 SkyScan query 14:13:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:13:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:06 Parameters OK 14:13:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:06 Set A/D data flow result=40 14:13:06 Set A/D channel type result=40 14:13:06 Set A/D encoding result=40 14:13:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:06 Set channel filter=0.000000e+000 result=40 14:13:06 Config A/D Result=40 14:13:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:06 Get A/D filter: -9.255963e+061 result=40 14:13:06 Get A/D value=-858993460 result=40 14:13:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:06 Parameters OK 14:13:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:06 Set A/D data flow result=40 14:13:06 Set A/D channel type result=40 14:13:06 Set A/D encoding result=40 14:13:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:06 Set channel filter=0.000000e+000 result=40 14:13:06 Config A/D Result=40 14:13:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:06 Get A/D filter: -9.255963e+061 result=40 14:13:06 Get A/D value=-858993460 result=40 14:13:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:13:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:13:06 Aux= 14:13:06 Message to Camera, serial 126409 queued 14:13:42 Received message from Master: op=PointingHead serial=126422 14:13:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:13:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:13:43 Point started: ret=0 14:13:43 point_skyscan result=0 14:13:44 Check angles 14:13:44 SkyScan query 14:13:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 14:13:44 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 14:13:44 Check angles 14:13:44 SkyScan query 14:13:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 14:13:45 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 14:13:45 Check angles 14:13:45 SkyScan query 14:13:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.805<-16387 Statuses=0008 0009 14:13:46 Msec=1500 True Az=112.995 Ze=-65.805 Az status=0008 Ze status=0009 14:13:46 Check angles 14:13:46 SkyScan query 14:13:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.775<-17785 Statuses=0008 0009 14:13:46 Msec=2250 True Az=112.995 Ze=-86.775 Az status=0008 Ze status=0009 14:13:47 Check angles 14:13:47 SkyScan query 14:13:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.76<-19184 Statuses=0008 0009 14:13:47 Msec=3000 True Az=112.995 Ze=-107.76 Az status=0008 Ze status=0009 14:13:47 Check angles 14:13:47 SkyScan query 14:13:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.7<-20580 Statuses=0008 0009 14:13:48 Msec=3750 True Az=112.995 Ze=-128.7 Az status=0008 Ze status=0009 14:13:48 Check angles 14:13:48 SkyScan query 14:13:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.7<-21980 Statuses=0008 0009 14:13:49 Msec=4500 True Az=112.995 Ze=-149.7 Az status=0008 Ze status=0009 14:13:49 Check angles 14:13:49 SkyScan query 14:13:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.94<-23396 Statuses=0008 0009 14:13:49 Msec=5250 True Az=112.995 Ze=-170.94 Az status=0008 Ze status=0009 14:13:50 Check angles 14:13:50 SkyScan query 14:13:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:13:50 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:13:50 Message to Master queued w/err=0: serial=126422 error=0 14:13:55 Received message from Master: op=Filter serial=126423 14:13:55 Color wheel filter change from 0 to 0 14:13:55 FLIGetFilterPos err=0 currentPosition=0 14:13:55 FLIGetStepsRemaining err=0 RemainingSteps=0 14:13:55 Filter is already there-color wheel unchanged 14:13:55 Received message from Master: op=Shutter serial=126424 14:13:55 Shutter LASER open 14:13:55 Received message from Camera: op=State serial=126426 14:13:55 GetSingleValue result=40 Value=cccccccc 14:13:55 SkyScan query 14:13:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:13:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:56 Parameters OK 14:13:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:56 Set A/D data flow result=40 14:13:56 Set A/D channel type result=40 14:13:56 Set A/D encoding result=40 14:13:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:56 Set channel filter=0.000000e+000 result=40 14:13:56 Config A/D Result=40 14:13:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:56 Get A/D filter: -9.255963e+061 result=40 14:13:56 Get A/D value=-858993460 result=40 14:13:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:56 Parameters OK 14:13:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:56 Set A/D data flow result=40 14:13:56 Set A/D channel type result=40 14:13:56 Set A/D encoding result=40 14:13:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:56 Set channel filter=0.000000e+000 result=40 14:13:56 Config A/D Result=40 14:13:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:56 Get A/D filter: -9.255963e+061 result=40 14:13:56 Get A/D value=-858993460 result=40 14:13:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:13:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:13:56 Aux= 14:13:56 Message to Camera, serial 126426 queued 14:14:04 Received message from Master: op=Shutter serial=126436 14:14:04 Shutter LASER close 14:14:05 Received message from Master: op=PointingHead serial=126440 14:14:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:14:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:14:05 Point started: ret=0 14:14:05 point_skyscan result=0 14:14:06 Check angles 14:14:06 SkyScan query 14:14:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.52<-21568 Statuses=0008 0009 14:14:07 Msec=0 True Az=112.995 Ze=-143.52 Az status=0008 Ze status=0009 14:14:07 Check angles 14:14:07 SkyScan query 14:14:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.16<-20144 Statuses=0008 0009 14:14:07 Msec=750 True Az=112.995 Ze=-122.16 Az status=0008 Ze status=0009 14:14:08 Check angles 14:14:08 SkyScan query 14:14:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.725<-18715 Statuses=0008 0009 14:14:08 Msec=1500 True Az=112.995 Ze=-100.725 Az status=0008 Ze status=0009 14:14:08 Check angles 14:14:08 SkyScan query 14:14:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.755<-17317 Statuses=0008 0009 14:14:09 Msec=2250 True Az=112.995 Ze=-79.755 Az status=0008 Ze status=0009 14:14:09 Check angles 14:14:09 SkyScan query 14:14:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 14:14:10 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 14:14:10 Check angles 14:14:10 SkyScan query 14:14:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.815<-14521 Statuses=0008 0009 14:14:10 Msec=3750 True Az=112.995 Ze=-37.815 Az status=0008 Ze status=0009 14:14:11 Check angles [UTC 2019-3-5 14:14:11] 14:14:11 SkyScan query 14:14:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.135<-13009 Statuses=0008 0009 14:14:11 Msec=4500 True Az=112.995 Ze=-15.135 Az status=0008 Ze status=0009 14:14:11 Check angles 14:14:11 SkyScan query 14:14:12 SkyScan query done: ret=0 az=113.01<-7534 ze=4.38<-11708 Statuses=0008 0009 14:14:12 Msec=5250 True Az=113.01 Ze=4.38 Az status=0008 Ze status=0009 14:14:12 Check angles 14:14:12 SkyScan query 14:14:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:14:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:14:13 Message to Master queued w/err=0: serial=126440 error=0 14:14:18 Received message from Master: op=Filter serial=126441 14:14:18 Color wheel filter change from 0 to 0 14:14:18 FLIGetFilterPos err=0 currentPosition=0 14:14:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:18 Filter is already there-color wheel unchanged 14:14:18 Received message from Master: op=Shutter serial=126442 14:14:18 Shutter LASER close 14:14:18 Received message from Camera: op=State serial=126444 14:14:18 GetSingleValue result=40 Value=cccccccc 14:14:18 SkyScan query 14:14:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:14:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:19 Parameters OK 14:14:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:19 Set A/D data flow result=40 14:14:19 Set A/D channel type result=40 14:14:19 Set A/D encoding result=40 14:14:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:19 Set channel filter=0.000000e+000 result=40 14:14:19 Config A/D Result=40 14:14:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:19 Get A/D filter: -9.255963e+061 result=40 14:14:19 Get A/D value=-858993460 result=40 14:14:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:19 Parameters OK 14:14:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:19 Set A/D data flow result=40 14:14:19 Set A/D channel type result=40 14:14:19 Set A/D encoding result=40 14:14:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:19 Set channel filter=0.000000e+000 result=40 14:14:19 Config A/D Result=40 14:14:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:19 Get A/D filter: -9.255963e+061 result=40 14:14:19 Get A/D value=-858993460 result=40 14:14:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:19 Aux= 14:14:19 Message to Camera, serial 126444 queued 14:14:55 Received message from Master: op=PointingHead serial=126457 14:14:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:14:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:14:56 Point started: ret=0 14:14:56 point_skyscan result=0 14:14:56 Check angles 14:14:56 SkyScan query 14:14:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:14:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:14:57 Message to Master queued w/err=0: serial=126457 error=0 14:15:02 Received message from Master: op=Filter serial=126458 14:15:02 Color wheel filter change from 0 to 0 14:15:02 FLIGetFilterPos err=0 currentPosition=0 14:15:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:02 Filter is already there-color wheel unchanged 14:15:02 Received message from Master: op=Shutter serial=126459 14:15:02 Shutter LASER close 14:15:02 Received message from Camera: op=State serial=126461 14:15:02 GetSingleValue result=40 Value=cccccccc 14:15:02 SkyScan query 14:15:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:15:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:03 Parameters OK 14:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:03 Set A/D data flow result=40 14:15:03 Set A/D channel type result=40 14:15:03 Set A/D encoding result=40 14:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:03 Set channel filter=0.000000e+000 result=40 14:15:03 Config A/D Result=40 14:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:03 Get A/D filter: -9.255963e+061 result=40 14:15:03 Get A/D value=-858993460 result=40 14:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:03 Parameters OK 14:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:03 Set A/D data flow result=40 14:15:03 Set A/D channel type result=40 14:15:03 Set A/D encoding result=40 14:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:03 Set channel filter=0.000000e+000 result=40 14:15:03 Config A/D Result=40 14:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:03 Get A/D filter: -9.255963e+061 result=40 14:15:03 Get A/D value=-858993460 result=40 14:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:15:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:15:03 Aux= 14:15:03 Message to Camera, serial 126461 queued 14:15:40 Received message from Master: op=PointingHead serial=126474 14:15:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:15:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:15:40 Point started: ret=0 14:15:40 point_skyscan result=0 14:15:41 Check angles 14:15:41 SkyScan query 14:15:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:15:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:15:41 Message to Master queued w/err=0: serial=126474 error=0 14:15:46 Received message from Master: op=Filter serial=126475 14:15:46 Color wheel filter change from 0 to 0 14:15:46 FLIGetFilterPos err=0 currentPosition=0 14:15:46 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:46 Filter is already there-color wheel unchanged 14:15:47 Received message from Master: op=Shutter serial=126476 14:15:47 Shutter LASER close 14:15:47 Received message from Camera: op=State serial=126478 14:15:47 GetSingleValue result=40 Value=cccccccc 14:15:47 SkyScan query 14:15:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:15:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:47 Parameters OK 14:15:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:47 Set A/D data flow result=40 14:15:47 Set A/D channel type result=40 14:15:47 Set A/D encoding result=40 14:15:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:47 Set channel filter=0.000000e+000 result=40 14:15:47 Config A/D Result=40 14:15:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:47 Get A/D filter: -9.255963e+061 result=40 14:15:47 Get A/D value=-858993460 result=40 14:15:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:47 Parameters OK 14:15:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:47 Set A/D data flow result=40 14:15:47 Set A/D channel type result=40 14:15:47 Set A/D encoding result=40 14:15:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:47 Set channel filter=0.000000e+000 result=40 14:15:47 Config A/D Result=40 14:15:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:47 Get A/D filter: -9.255963e+061 result=40 14:15:47 Get A/D value=-858993460 result=40 14:15:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:15:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:15:47 Aux= 14:15:47 Message to Camera, serial 126478 queued 14:16:24 Received message from Master: op=PointingHead serial=126491 14:16:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:16:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:16:24 Point started: ret=0 14:16:24 point_skyscan result=0 14:16:25 Check angles 14:16:25 SkyScan query 14:16:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:16:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:16:26 Message to Master queued w/err=0: serial=126491 error=0 14:16:31 Received message from Master: op=Filter serial=126492 14:16:31 Color wheel filter change from 0 to 0 14:16:31 FLIGetFilterPos err=0 currentPosition=0 14:16:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:16:31 Filter is already there-color wheel unchanged 14:16:31 Received message from Master: op=Shutter serial=126493 14:16:31 Shutter LASER close 14:16:31 Received message from Camera: op=State serial=126495 14:16:31 GetSingleValue result=40 Value=cccccccc 14:16:31 SkyScan query 14:16:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:16:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:31 Parameters OK 14:16:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:31 Set A/D data flow result=40 14:16:31 Set A/D channel type result=40 14:16:31 Set A/D encoding result=40 14:16:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:31 Set channel filter=0.000000e+000 result=40 14:16:31 Config A/D Result=40 14:16:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:31 Get A/D filter: -9.255963e+061 result=40 14:16:31 Get A/D value=-858993460 result=40 14:16:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:31 Parameters OK 14:16:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:31 Set A/D data flow result=40 14:16:31 Set A/D channel type result=40 14:16:31 Set A/D encoding result=40 14:16:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:31 Set channel filter=0.000000e+000 result=40 14:16:31 Config A/D Result=40 14:16:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:31 Get A/D filter: -9.255963e+061 result=40 14:16:31 Get A/D value=-858993460 result=40 14:16:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:16:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:16:31 Aux= 14:16:31 Message to Camera, serial 126495 queued 14:17:08 Received message from Master: op=PointingHead serial=126508 14:17:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:17:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:17:09 Point started: ret=0 14:17:09 point_skyscan result=0 14:17:09 Check angles 14:17:09 SkyScan query 14:17:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.22<-13548 Statuses=0008 0009 14:17:10 Msec=0 True Az=112.995 Ze=-23.22 Az status=0008 Ze status=0009 14:17:10 Check angles 14:17:10 SkyScan query 14:17:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.175<-14945 Statuses=0008 0009 14:17:11 Msec=750 True Az=112.995 Ze=-44.175 Az status=0008 Ze status=0009 14:17:11 Check angles 14:17:11 SkyScan query 14:17:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.085<-16339 Statuses=0008 0009 14:17:11 Msec=1500 True Az=112.995 Ze=-65.085 Az status=0008 Ze status=0009 14:17:12 Check angles 14:17:12 SkyScan query 14:17:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.04<-17736 Statuses=0008 0009 14:17:12 Msec=2250 True Az=112.995 Ze=-86.04 Az status=0008 Ze status=0009 14:17:12 Check angles 14:17:12 SkyScan query 14:17:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.965<-19131 Statuses=0008 0009 14:17:13 Msec=3000 True Az=112.995 Ze=-106.965 Az status=0008 Ze status=0009 14:17:13 Check angles 14:17:13 SkyScan query 14:17:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.4<-20560 Statuses=0008 0009 14:17:14 Msec=3750 True Az=112.995 Ze=-128.4 Az status=0008 Ze status=0009 14:17:14 Check angles 14:17:14 SkyScan query 14:17:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.385<-21959 Statuses=0008 0009 14:17:14 Msec=4500 True Az=112.995 Ze=-149.385 Az status=0008 Ze status=0009 14:17:15 Check angles 14:17:15 SkyScan query 14:17:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.31<-23354 Statuses=0008 0009 14:17:15 Msec=5250 True Az=112.995 Ze=-170.31 Az status=0008 Ze status=0009 14:17:15 Check angles 14:17:15 SkyScan query 14:17:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:17:16 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:17:16 Message to Master queued w/err=0: serial=126508 error=0 14:17:21 Received message from Master: op=Filter serial=126509 14:17:21 Color wheel filter change from 0 to 0 14:17:21 FLIGetFilterPos err=0 currentPosition=0 14:17:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:17:21 Filter is already there-color wheel unchanged 14:17:21 Received message from Master: op=Shutter serial=126510 14:17:21 Shutter LASER open 14:17:21 Received message from Camera: op=State serial=126512 14:17:21 GetSingleValue result=40 Value=cccccccc 14:17:21 SkyScan query 14:17:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:17:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:22 Parameters OK 14:17:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:22 Set A/D data flow result=40 14:17:22 Set A/D channel type result=40 14:17:22 Set A/D encoding result=40 14:17:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:22 Set channel filter=0.000000e+000 result=40 14:17:22 Config A/D Result=40 14:17:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:22 Get A/D filter: -9.255963e+061 result=40 14:17:22 Get A/D value=-858993460 result=40 14:17:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:22 Parameters OK 14:17:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:22 Set A/D data flow result=40 14:17:22 Set A/D channel type result=40 14:17:22 Set A/D encoding result=40 14:17:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:22 Set channel filter=0.000000e+000 result=40 14:17:22 Config A/D Result=40 14:17:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:22 Get A/D filter: -9.255963e+061 result=40 14:17:22 Get A/D value=-858993460 result=40 14:17:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:17:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:17:22 Aux= 14:17:22 Message to Camera, serial 126512 queued 14:17:30 Received message from Master: op=Shutter serial=126522 14:17:30 Shutter LASER close 14:17:31 Received message from Master: op=PointingHead serial=126526 14:17:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:17:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:17:31 Point started: ret=0 14:17:31 point_skyscan result=0 14:17:32 Check angles 14:17:32 SkyScan query 14:17:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.535<-21569 Statuses=0008 0009 14:17:33 Msec=0 True Az=112.995 Ze=-143.535 Az status=0008 Ze status=0009 14:17:33 Check angles 14:17:33 SkyScan query 14:17:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.16<-20144 Statuses=0008 0009 14:17:33 Msec=750 True Az=112.995 Ze=-122.16 Az status=0008 Ze status=0009 14:17:34 Check angles 14:17:34 SkyScan query 14:17:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.755<-18717 Statuses=0008 0009 14:17:34 Msec=1500 True Az=112.995 Ze=-100.755 Az status=0008 Ze status=0009 14:17:34 Check angles 14:17:34 SkyScan query 14:17:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.275<-17285 Statuses=0008 0009 14:17:35 Msec=2250 True Az=112.995 Ze=-79.275 Az status=0008 Ze status=0009 14:17:35 Check angles 14:17:35 SkyScan query 14:17:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.335<-15889 Statuses=0008 0009 14:17:36 Msec=3000 True Az=112.995 Ze=-58.335 Az status=0008 Ze status=0009 14:17:36 Check angles 14:17:36 SkyScan query 14:17:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.44<-14496 Statuses=0008 0009 14:17:36 Msec=3750 True Az=112.995 Ze=-37.44 Az status=0008 Ze status=0009 14:17:37 Check angles 14:17:37 SkyScan query 14:17:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.455<-13097 Statuses=0008 0009 14:17:37 Msec=4500 True Az=112.995 Ze=-16.455 Az status=0008 Ze status=0009 14:17:37 Check angles 14:17:37 SkyScan query 14:17:38 SkyScan query done: ret=0 az=112.995<-7533 ze=4.38<-11708 Statuses=0008 0009 14:17:38 Msec=5250 True Az=112.995 Ze=4.38 Az status=0008 Ze status=0009 14:17:38 Check angles 14:17:38 SkyScan query 14:17:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:17:39 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:17:39 Message to Master queued w/err=0: serial=126526 error=0 14:17:44 Received message from Master: op=Filter serial=126527 14:17:44 Color wheel filter change from 0 to 0 14:17:44 FLIGetFilterPos err=0 currentPosition=0 14:17:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:17:44 Filter is already there-color wheel unchanged 14:17:44 Received message from Master: op=Shutter serial=126528 14:17:44 Shutter LASER close 14:17:44 Received message from Camera: op=State serial=126530 14:17:44 GetSingleValue result=40 Value=cccccccc 14:17:44 SkyScan query 14:17:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:17:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:45 Parameters OK 14:17:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:45 Set A/D data flow result=40 14:17:45 Set A/D channel type result=40 14:17:45 Set A/D encoding result=40 14:17:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:45 Set channel filter=0.000000e+000 result=40 14:17:45 Config A/D Result=40 14:17:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:45 Get A/D filter: -9.255963e+061 result=40 14:17:45 Get A/D value=-858993460 result=40 14:17:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:45 Parameters OK 14:17:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:45 Set A/D data flow result=40 14:17:45 Set A/D channel type result=40 14:17:45 Set A/D encoding result=40 14:17:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:45 Set channel filter=0.000000e+000 result=40 14:17:45 Config A/D Result=40 14:17:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:45 Get A/D filter: -9.255963e+061 result=40 14:17:45 Get A/D value=-858993460 result=40 14:17:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:17:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:17:45 Aux= 14:17:45 Message to Camera, serial 126530 queued 14:18:21 Received message from Master: op=PointingHead serial=126543 14:18:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:18:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:18:22 Point started: ret=0 14:18:22 point_skyscan result=0 14:18:23 Check angles 14:18:23 SkyScan query 14:18:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:18:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:18:23 Message to Master queued w/err=0: serial=126543 error=0 14:18:28 Received message from Master: op=Filter serial=126544 14:18:28 Color wheel filter change from 0 to 0 14:18:28 FLIGetFilterPos err=0 currentPosition=0 14:18:28 FLIGetStepsRemaining err=0 RemainingSteps=0 14:18:28 Filter is already there-color wheel unchanged 14:18:28 Received message from Master: op=Shutter serial=126545 14:18:28 Shutter LASER close 14:18:28 Received message from Camera: op=State serial=126547 14:18:28 GetSingleValue result=40 Value=cccccccc 14:18:28 SkyScan query 14:18:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:18:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:29 Parameters OK 14:18:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:29 Set A/D data flow result=40 14:18:29 Set A/D channel type result=40 14:18:29 Set A/D encoding result=40 14:18:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:29 Set channel filter=0.000000e+000 result=40 14:18:29 Config A/D Result=40 14:18:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:29 Get A/D filter: -9.255963e+061 result=40 14:18:29 Get A/D value=-858993460 result=40 14:18:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:29 Parameters OK 14:18:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:29 Set A/D data flow result=40 14:18:29 Set A/D channel type result=40 14:18:29 Set A/D encoding result=40 14:18:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:29 Set channel filter=0.000000e+000 result=40 14:18:29 Config A/D Result=40 14:18:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:29 Get A/D filter: -9.255963e+061 result=40 14:18:29 Get A/D value=-858993460 result=40 14:18:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:18:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:18:29 Aux= 14:18:29 Message to Camera, serial 126547 queued 14:19:06 Received message from Master: op=PointingHead serial=126560 14:19:06 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:19:06 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:19:06 Point started: ret=0 14:19:06 point_skyscan result=0 14:19:07 Check angles 14:19:07 SkyScan query 14:19:07 SkyScan query done: ret=0 az=136.365<-9091 ze=-6.51<-12434 Statuses=0009 0008 14:19:07 Msec=0 True Az=136.365 Ze=-6.51 Az status=0009 Ze status=0008 14:19:08 Check angles 14:19:08 SkyScan query 14:19:08 SkyScan query done: ret=0 az=153.72<-10248 ze=-6.495<-12433 Statuses=0009 0008 14:19:08 Msec=750 True Az=153.72 Ze=-6.495 Az status=0009 Ze status=0008 14:19:08 Check angles 14:19:08 SkyScan query 14:19:09 SkyScan query done: ret=0 az=171.21<-11414 ze=-6.495<-12433 Statuses=0009 0008 14:19:09 Msec=1500 True Az=171.21 Ze=-6.495 Az status=0009 Ze status=0008 14:19:09 Check angles 14:19:09 SkyScan query 14:19:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:19:10 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:19:10 Message to Master queued w/err=0: serial=126560 error=0 14:19:15 Received message from Master: op=Filter serial=126561 14:19:15 Color wheel filter change from 0 to 0 14:19:15 FLIGetFilterPos err=0 currentPosition=0 14:19:15 FLIGetStepsRemaining err=0 RemainingSteps=0 14:19:15 Filter is already there-color wheel unchanged 14:19:15 Received message from Master: op=Shutter serial=126562 14:19:15 Shutter LASER close 14:19:15 Received message from Camera: op=State serial=126564 14:19:15 GetSingleValue result=40 Value=cccccccc 14:19:15 SkyScan query 14:19:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:19:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:15 Parameters OK 14:19:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:15 Set A/D data flow result=40 14:19:15 Set A/D channel type result=40 14:19:15 Set A/D encoding result=40 14:19:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:15 Set channel filter=0.000000e+000 result=40 14:19:15 Config A/D Result=40 14:19:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:15 Get A/D filter: -9.255963e+061 result=40 14:19:15 Get A/D value=-858993460 result=40 14:19:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:15 Parameters OK 14:19:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:15 Set A/D data flow result=40 14:19:15 Set A/D channel type result=40 14:19:15 Set A/D encoding result=40 14:19:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:15 Set channel filter=0.000000e+000 result=40 14:19:15 Config A/D Result=40 14:19:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:15 Get A/D filter: -9.255963e+061 result=40 14:19:15 Get A/D value=-858993460 result=40 14:19:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:19:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:19:15 Aux= 14:19:15 Message to Camera, serial 126564 queued 14:19:52 Received message from Master: op=PointingHead serial=126577 14:19:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:19:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:19:53 Point started: ret=0 14:19:53 point_skyscan result=0 14:19:53 Check angles 14:19:53 SkyScan query 14:19:54 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 14:19:54 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 14:19:54 Check angles 14:19:54 SkyScan query 14:19:55 SkyScan query done: ret=0 az=135.72<-9048 ze=6.495<-11567 Statuses=0009 0008 14:19:55 Msec=750 True Az=135.72 Ze=6.495 Az status=0009 Ze status=0008 14:19:55 Check angles 14:19:55 SkyScan query 14:19:55 SkyScan query done: ret=0 az=118.185<-7879 ze=6.495<-11567 Statuses=0009 0008 14:19:55 Msec=1500 True Az=118.185 Ze=6.495 Az status=0009 Ze status=0008 14:19:56 Check angles 14:19:56 SkyScan query 14:19:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:19:56 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:19:56 Message to Master queued w/err=0: serial=126577 error=0 14:20:01 Received message from Master: op=Filter serial=126578 14:20:01 Color wheel filter change from 0 to 0 14:20:01 FLIGetFilterPos err=0 currentPosition=0 14:20:01 FLIGetStepsRemaining err=0 RemainingSteps=0 14:20:01 Filter is already there-color wheel unchanged 14:20:01 Received message from Master: op=Shutter serial=126579 14:20:01 Shutter LASER close 14:20:01 Received message from Camera: op=State serial=126581 14:20:01 GetSingleValue result=40 Value=cccccccc 14:20:01 SkyScan query 14:20:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:20:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:02 Parameters OK 14:20:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:02 Set A/D data flow result=40 14:20:02 Set A/D channel type result=40 14:20:02 Set A/D encoding result=40 14:20:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:02 Set channel filter=0.000000e+000 result=40 14:20:02 Config A/D Result=40 14:20:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:02 Get A/D filter: -9.255963e+061 result=40 14:20:02 Get A/D value=-858993460 result=40 14:20:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:02 Parameters OK 14:20:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:02 Set A/D data flow result=40 14:20:02 Set A/D channel type result=40 14:20:02 Set A/D encoding result=40 14:20:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:02 Set channel filter=0.000000e+000 result=40 14:20:02 Config A/D Result=40 14:20:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:02 Get A/D filter: -9.255963e+061 result=40 14:20:02 Get A/D value=-858993460 result=40 14:20:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:20:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:20:02 Aux= 14:20:02 Message to Camera, serial 126581 queued 14:20:39 Received message from Master: op=PointingHead serial=126594 14:20:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:20:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:20:39 Point started: ret=0 14:20:39 point_skyscan result=0 14:20:40 Check angles 14:20:40 SkyScan query 14:20:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 14:20:41 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 14:20:41 Check angles 14:20:41 SkyScan query 14:20:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 14:20:41 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 14:20:41 Check angles 14:20:41 SkyScan query 14:20:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.955<-16397 Statuses=0008 0009 14:20:42 Msec=1500 True Az=112.995 Ze=-65.955 Az status=0008 Ze status=0009 14:20:42 Check angles 14:20:42 SkyScan query 14:20:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.91<-17794 Statuses=0008 0009 14:20:43 Msec=2250 True Az=112.995 Ze=-86.91 Az status=0008 Ze status=0009 14:20:43 Check angles 14:20:43 SkyScan query 14:20:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.91<-19194 Statuses=0008 0009 14:20:44 Msec=3000 True Az=112.995 Ze=-107.91 Az status=0008 Ze status=0009 14:20:44 Check angles 14:20:44 SkyScan query 14:20:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.27<-20618 Statuses=0008 0009 14:20:44 Msec=3750 True Az=112.995 Ze=-129.27 Az status=0008 Ze status=0009 14:20:44 Check angles 14:20:44 SkyScan query 14:20:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.21<-22014 Statuses=0008 0009 14:20:45 Msec=4500 True Az=112.995 Ze=-150.21 Az status=0008 Ze status=0009 14:20:45 Check angles 14:20:45 SkyScan query 14:20:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 14:20:46 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 14:20:46 Check angles 14:20:46 SkyScan query 14:20:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:20:47 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:20:47 Message to Master queued w/err=0: serial=126594 error=0 14:20:52 Received message from Master: op=Filter serial=126595 14:20:52 Color wheel filter change from 0 to 0 14:20:52 FLIGetFilterPos err=0 currentPosition=0 14:20:52 FLIGetStepsRemaining err=0 RemainingSteps=0 14:20:52 Filter is already there-color wheel unchanged 14:20:52 Received message from Master: op=Shutter serial=126596 14:20:52 Shutter LASER open 14:20:52 Received message from Camera: op=State serial=126598 14:20:52 GetSingleValue result=40 Value=cccccccc 14:20:52 SkyScan query 14:20:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:20:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:52 Parameters OK 14:20:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:52 Set A/D data flow result=40 14:20:52 Set A/D channel type result=40 14:20:52 Set A/D encoding result=40 14:20:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:52 Set channel filter=0.000000e+000 result=40 14:20:52 Config A/D Result=40 14:20:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:52 Get A/D filter: -9.255963e+061 result=40 14:20:52 Get A/D value=-858993460 result=40 14:20:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:52 Parameters OK 14:20:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:52 Set A/D data flow result=40 14:20:52 Set A/D channel type result=40 14:20:52 Set A/D encoding result=40 14:20:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:52 Set channel filter=0.000000e+000 result=40 14:20:52 Config A/D Result=40 14:20:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:52 Get A/D filter: -9.255963e+061 result=40 14:20:52 Get A/D value=-858993460 result=40 14:20:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:20:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:20:52 Aux= 14:20:52 Message to Camera, serial 126598 queued 14:21:01 Received message from Master: op=Shutter serial=126608 14:21:01 Shutter LASER close 14:21:01 Received message from Master: op=PointingHead serial=126612 14:21:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:21:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:21:02 Point started: ret=0 14:21:02 point_skyscan result=0 14:21:02 Check angles 14:21:02 SkyScan query 14:21:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 14:21:03 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 14:21:03 Check angles 14:21:03 SkyScan query 14:21:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.115<-20141 Statuses=0008 0009 14:21:04 Msec=750 True Az=112.995 Ze=-122.115 Az status=0008 Ze status=0009 14:21:04 Check angles 14:21:04 SkyScan query 14:21:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.19<-18746 Statuses=0008 0009 14:21:05 Msec=1500 True Az=112.995 Ze=-101.19 Az status=0008 Ze status=0009 14:21:05 Check angles 14:21:05 SkyScan query 14:21:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.71<-17314 Statuses=0008 0009 14:21:05 Msec=2250 True Az=112.995 Ze=-79.71 Az status=0008 Ze status=0009 14:21:05 Check angles 14:21:05 SkyScan query 14:21:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.77<-15918 Statuses=0008 0009 14:21:06 Msec=3000 True Az=112.995 Ze=-58.77 Az status=0008 Ze status=0009 14:21:06 Check angles 14:21:06 SkyScan query 14:21:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.77<-14518 Statuses=0008 0009 14:21:07 Msec=3750 True Az=112.995 Ze=-37.77 Az status=0008 Ze status=0009 14:21:07 Check angles 14:21:07 SkyScan query 14:21:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.815<-13121 Statuses=0008 0009 14:21:08 Msec=4500 True Az=112.995 Ze=-16.815 Az status=0008 Ze status=0009 14:21:08 Check angles 14:21:08 SkyScan query 14:21:08 SkyScan query done: ret=0 az=113.01<-7534 ze=4.095<-11727 Statuses=0008 0009 14:21:08 Msec=5250 True Az=113.01 Ze=4.095 Az status=0008 Ze status=0009 14:21:08 Check angles 14:21:08 SkyScan query 14:21:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:21:09 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:21:09 Message to Master queued w/err=0: serial=126612 error=0 14:21:14 Received message from Master: op=Filter serial=126613 14:21:14 Color wheel filter change from 0 to 0 14:21:14 FLIGetFilterPos err=0 currentPosition=0 14:21:14 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:14 Filter is already there-color wheel unchanged 14:21:14 Received message from Master: op=Shutter serial=126614 14:21:14 Shutter LASER close 14:21:14 Received message from Camera: op=State serial=126616 14:21:14 GetSingleValue result=40 Value=cccccccc 14:21:14 SkyScan query 14:21:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:21:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:15 Parameters OK 14:21:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:15 Set A/D data flow result=40 14:21:15 Set A/D channel type result=40 14:21:15 Set A/D encoding result=40 14:21:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:15 Set channel filter=0.000000e+000 result=40 14:21:15 Config A/D Result=40 14:21:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:15 Get A/D filter: -9.255963e+061 result=40 14:21:15 Get A/D value=-858993460 result=40 14:21:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:15 Parameters OK 14:21:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:15 Set A/D data flow result=40 14:21:15 Set A/D channel type result=40 14:21:15 Set A/D encoding result=40 14:21:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:15 Set channel filter=0.000000e+000 result=40 14:21:15 Config A/D Result=40 14:21:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:15 Get A/D filter: -9.255963e+061 result=40 14:21:15 Get A/D value=-858993460 result=40 14:21:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:15 Aux= 14:21:15 Message to Camera, serial 126616 queued 14:21:51 Received message from Master: op=PointingHead serial=126628 14:21:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:21:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:21:51 Point started: ret=0 14:21:51 point_skyscan result=0 14:21:52 Check angles 14:21:52 SkyScan query 14:21:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:21:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:21:53 Message to Master queued w/err=0: serial=126628 error=0 14:21:58 Received message from Master: op=Filter serial=126629 14:21:58 Color wheel filter change from 0 to 0 14:21:58 FLIGetFilterPos err=0 currentPosition=0 14:21:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:58 Filter is already there-color wheel unchanged 14:21:58 Received message from Master: op=Shutter serial=126630 14:21:58 Shutter LASER close 14:21:58 Received message from Camera: op=State serial=126632 14:21:58 GetSingleValue result=40 Value=cccccccc 14:21:58 SkyScan query 14:21:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:21:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:58 Parameters OK 14:21:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:58 Set A/D data flow result=40 14:21:58 Set A/D channel type result=40 14:21:58 Set A/D encoding result=40 14:21:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:58 Set channel filter=0.000000e+000 result=40 14:21:58 Config A/D Result=40 14:21:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:58 Get A/D filter: -9.255963e+061 result=40 14:21:58 Get A/D value=-858993460 result=40 14:21:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:58 Parameters OK 14:21:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:58 Set A/D data flow result=40 14:21:58 Set A/D channel type result=40 14:21:58 Set A/D encoding result=40 14:21:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:58 Set channel filter=0.000000e+000 result=40 14:21:58 Config A/D Result=40 14:21:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:58 Get A/D filter: -9.255963e+061 result=40 14:21:58 Get A/D value=-858993460 result=40 14:21:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:58 Aux= 14:21:58 Message to Camera, serial 126632 queued 14:22:35 Received message from Master: op=PointingHead serial=126645 14:22:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:22:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:22:36 Point started: ret=0 14:22:36 point_skyscan result=0 14:22:36 Check angles 14:22:36 SkyScan query 14:22:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:22:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:22:37 Message to Master queued w/err=0: serial=126645 error=0 14:22:42 Received message from Master: op=Filter serial=126646 14:22:42 Color wheel filter change from 0 to 0 14:22:42 FLIGetFilterPos err=0 currentPosition=0 14:22:42 FLIGetStepsRemaining err=0 RemainingSteps=0 14:22:42 Filter is already there-color wheel unchanged 14:22:42 Received message from Master: op=Shutter serial=126647 14:22:42 Shutter LASER close 14:22:42 Received message from Camera: op=State serial=126649 14:22:42 GetSingleValue result=40 Value=cccccccc 14:22:42 SkyScan query 14:22:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:22:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:43 Parameters OK 14:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:43 Set A/D data flow result=40 14:22:43 Set A/D channel type result=40 14:22:43 Set A/D encoding result=40 14:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:43 Set channel filter=0.000000e+000 result=40 14:22:43 Config A/D Result=40 14:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:43 Get A/D filter: -9.255963e+061 result=40 14:22:43 Get A/D value=-858993460 result=40 14:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:43 Parameters OK 14:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:43 Set A/D data flow result=40 14:22:43 Set A/D channel type result=40 14:22:43 Set A/D encoding result=40 14:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:43 Set channel filter=0.000000e+000 result=40 14:22:43 Config A/D Result=40 14:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:43 Get A/D filter: -9.255963e+061 result=40 14:22:43 Get A/D value=-858993460 result=40 14:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:22:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:22:43 Aux= 14:22:43 Message to Camera, serial 126649 queued 14:23:19 Received message from Master: op=PointingHead serial=126662 14:23:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:23:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:23:20 Point started: ret=0 14:23:20 point_skyscan result=0 14:23:21 Check angles 14:23:21 SkyScan query 14:23:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:23:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:23:21 Message to Master queued w/err=0: serial=126662 error=0 14:23:26 Received message from Master: op=Filter serial=126663 14:23:26 Color wheel filter change from 0 to 0 14:23:26 FLIGetFilterPos err=0 currentPosition=0 14:23:26 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:26 Filter is already there-color wheel unchanged 14:23:26 Received message from Master: op=Shutter serial=126664 14:23:26 Shutter LASER close 14:23:26 Received message from Camera: op=State serial=126666 14:23:26 GetSingleValue result=40 Value=cccccccc 14:23:26 SkyScan query 14:23:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:23:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:27 Parameters OK 14:23:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:27 Set A/D data flow result=40 14:23:27 Set A/D channel type result=40 14:23:27 Set A/D encoding result=40 14:23:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:27 Set channel filter=0.000000e+000 result=40 14:23:27 Config A/D Result=40 14:23:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:27 Get A/D filter: -9.255963e+061 result=40 14:23:27 Get A/D value=-858993460 result=40 14:23:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:27 Parameters OK 14:23:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:27 Set A/D data flow result=40 14:23:27 Set A/D channel type result=40 14:23:27 Set A/D encoding result=40 14:23:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:27 Set channel filter=0.000000e+000 result=40 14:23:27 Config A/D Result=40 14:23:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:27 Get A/D filter: -9.255963e+061 result=40 14:23:27 Get A/D value=-858993460 result=40 14:23:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:23:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:23:27 Aux= 14:23:27 Message to Camera, serial 126666 queued [UTC 2019-3-5 14:23:50] 14:24:04 Received message from Master: op=PointingHead serial=126679 14:24:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:24:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:24:04 Point started: ret=0 14:24:04 point_skyscan result=0 14:24:05 Check angles 14:24:05 SkyScan query 14:24:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.505<-13567 Statuses=0008 0009 14:24:05 Msec=0 True Az=112.995 Ze=-23.505 Az status=0008 Ze status=0009 14:24:06 Check angles 14:24:06 SkyScan query 14:24:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.85<-14990 Statuses=0008 0009 14:24:06 Msec=750 True Az=112.995 Ze=-44.85 Az status=0008 Ze status=0009 14:24:06 Check angles 14:24:06 SkyScan query 14:24:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.82<-16388 Statuses=0008 0009 14:24:07 Msec=1500 True Az=112.995 Ze=-65.82 Az status=0008 Ze status=0009 14:24:07 Check angles 14:24:07 SkyScan query 14:24:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.805<-17787 Statuses=0008 0009 14:24:08 Msec=2250 True Az=112.995 Ze=-86.805 Az status=0008 Ze status=0009 14:24:08 Check angles 14:24:08 SkyScan query 14:24:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.775<-19185 Statuses=0008 0009 14:24:08 Msec=3000 True Az=112.995 Ze=-107.775 Az status=0008 Ze status=0009 14:24:09 Check angles 14:24:09 SkyScan query 14:24:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.715<-20581 Statuses=0008 0009 14:24:09 Msec=3750 True Az=112.995 Ze=-128.715 Az status=0008 Ze status=0009 14:24:09 Check angles 14:24:09 SkyScan query 14:24:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.7<-21980 Statuses=0008 0009 14:24:10 Msec=4500 True Az=112.995 Ze=-149.7 Az status=0008 Ze status=0009 14:24:10 Check angles 14:24:10 SkyScan query 14:24:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.625<-23375 Statuses=0008 0009 14:24:11 Msec=5250 True Az=112.995 Ze=-170.625 Az status=0008 Ze status=0009 14:24:11 Check angles 14:24:11 SkyScan query 14:24:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:24:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:24:11 Message to Master queued w/err=0: serial=126679 error=0 14:24:16 Received message from Master: op=Filter serial=126680 14:24:16 Color wheel filter change from 0 to 0 14:24:16 FLIGetFilterPos err=0 currentPosition=0 14:24:16 FLIGetStepsRemaining err=0 RemainingSteps=0 14:24:16 Filter is already there-color wheel unchanged 14:24:17 Received message from Master: op=Shutter serial=126681 14:24:17 Shutter LASER open 14:24:17 Received message from Camera: op=State serial=126683 14:24:17 GetSingleValue result=40 Value=cccccccc 14:24:17 SkyScan query 14:24:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:24:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:17 Parameters OK 14:24:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:17 Set A/D data flow result=40 14:24:17 Set A/D channel type result=40 14:24:17 Set A/D encoding result=40 14:24:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:17 Set channel filter=0.000000e+000 result=40 14:24:17 Config A/D Result=40 14:24:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:17 Get A/D filter: -9.255963e+061 result=40 14:24:17 Get A/D value=-858993460 result=40 14:24:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:17 Parameters OK 14:24:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:17 Set A/D data flow result=40 14:24:17 Set A/D channel type result=40 14:24:17 Set A/D encoding result=40 14:24:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:17 Set channel filter=0.000000e+000 result=40 14:24:17 Config A/D Result=40 14:24:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:17 Get A/D filter: -9.255963e+061 result=40 14:24:17 Get A/D value=-858993460 result=40 14:24:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:24:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:24:17 Aux= 14:24:17 Message to Camera, serial 126683 queued 14:24:26 Received message from Master: op=Shutter serial=126693 14:24:26 Shutter LASER close 14:24:26 Received message from Master: op=PointingHead serial=126697 14:24:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:24:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:24:27 Point started: ret=0 14:24:27 point_skyscan result=0 14:24:28 Check angles 14:24:28 SkyScan query 14:24:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 14:24:28 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 14:24:28 Check angles 14:24:28 SkyScan query 14:24:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 14:24:29 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 14:24:29 Check angles 14:24:29 SkyScan query 14:24:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.56<-18704 Statuses=0008 0009 14:24:30 Msec=1500 True Az=112.995 Ze=-100.56 Az status=0008 Ze status=0009 14:24:30 Check angles 14:24:30 SkyScan query 14:24:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.59<-17306 Statuses=0008 0009 14:24:30 Msec=2250 True Az=112.995 Ze=-79.59 Az status=0008 Ze status=0009 14:24:31 Check angles 14:24:31 SkyScan query 14:24:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.65<-15910 Statuses=0008 0009 14:24:31 Msec=3000 True Az=112.995 Ze=-58.65 Az status=0008 Ze status=0009 14:24:31 Check angles 14:24:31 SkyScan query 14:24:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.665<-14511 Statuses=0008 0009 14:24:32 Msec=3750 True Az=112.995 Ze=-37.665 Az status=0008 Ze status=0009 14:24:32 Check angles 14:24:32 SkyScan query 14:24:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.71<-13114 Statuses=0008 0009 14:24:33 Msec=4500 True Az=112.995 Ze=-16.71 Az status=0008 Ze status=0009 14:24:33 Check angles 14:24:33 SkyScan query 14:24:33 SkyScan query done: ret=0 az=113.01<-7534 ze=4.485<-11701 Statuses=0008 0009 14:24:33 Msec=5250 True Az=113.01 Ze=4.485 Az status=0008 Ze status=0009 14:24:34 Check angles 14:24:34 SkyScan query 14:24:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:24:34 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:24:34 Message to Master queued w/err=0: serial=126697 error=0 14:24:39 Received message from Master: op=Filter serial=126698 14:24:39 Color wheel filter change from 0 to 0 14:24:39 FLIGetFilterPos err=0 currentPosition=0 14:24:39 FLIGetStepsRemaining err=0 RemainingSteps=0 14:24:39 Filter is already there-color wheel unchanged 14:24:39 Received message from Master: op=Shutter serial=126699 14:24:39 Shutter LASER close 14:24:39 Received message from Camera: op=State serial=126701 14:24:39 GetSingleValue result=40 Value=cccccccc 14:24:39 SkyScan query 14:24:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:24:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:40 Parameters OK 14:24:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:40 Set A/D data flow result=40 14:24:40 Set A/D channel type result=40 14:24:40 Set A/D encoding result=40 14:24:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:40 Set channel filter=0.000000e+000 result=40 14:24:40 Config A/D Result=40 14:24:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:40 Get A/D filter: -9.255963e+061 result=40 14:24:40 Get A/D value=-858993460 result=40 14:24:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:40 Parameters OK 14:24:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:40 Set A/D data flow result=40 14:24:40 Set A/D channel type result=40 14:24:40 Set A/D encoding result=40 14:24:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:40 Set channel filter=0.000000e+000 result=40 14:24:40 Config A/D Result=40 14:24:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:40 Get A/D filter: -9.255963e+061 result=40 14:24:40 Get A/D value=-858993460 result=40 14:24:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:24:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:24:40 Aux= 14:24:40 Message to Camera, serial 126701 queued 14:25:17 Received message from Master: op=PointingHead serial=126714 14:25:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:25:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:25:17 Point started: ret=0 14:25:17 point_skyscan result=0 14:25:18 Check angles 14:25:18 SkyScan query 14:25:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:25:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:25:19 Message to Master queued w/err=0: serial=126714 error=0 14:25:24 Received message from Master: op=Filter serial=126715 14:25:24 Color wheel filter change from 0 to 0 14:25:24 FLIGetFilterPos err=0 currentPosition=0 14:25:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:25:24 Filter is already there-color wheel unchanged 14:25:24 Received message from Master: op=Shutter serial=126716 14:25:24 Shutter LASER close 14:25:24 Received message from Camera: op=State serial=126718 14:25:24 GetSingleValue result=40 Value=cccccccc 14:25:24 SkyScan query 14:25:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:25:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:24 Parameters OK 14:25:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:24 Set A/D data flow result=40 14:25:24 Set A/D channel type result=40 14:25:24 Set A/D encoding result=40 14:25:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:24 Set channel filter=0.000000e+000 result=40 14:25:24 Config A/D Result=40 14:25:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:24 Get A/D filter: -9.255963e+061 result=40 14:25:24 Get A/D value=-858993460 result=40 14:25:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:24 Parameters OK 14:25:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:24 Set A/D data flow result=40 14:25:24 Set A/D channel type result=40 14:25:24 Set A/D encoding result=40 14:25:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:24 Set channel filter=0.000000e+000 result=40 14:25:24 Config A/D Result=40 14:25:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:24 Get A/D filter: -9.255963e+061 result=40 14:25:24 Get A/D value=-858993460 result=40 14:25:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:25:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:25:24 Aux= 14:25:24 Message to Camera, serial 126718 queued 14:26:01 Received message from Master: op=PointingHead serial=126731 14:26:01 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:26:01 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:26:02 Point started: ret=0 14:26:02 point_skyscan result=0 14:26:02 Check angles 14:26:02 SkyScan query 14:26:03 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 14:26:03 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 14:26:03 Check angles 14:26:03 SkyScan query 14:26:04 SkyScan query done: ret=0 az=153.69<-10246 ze=-6.495<-12433 Statuses=0009 0008 14:26:04 Msec=750 True Az=153.69 Ze=-6.495 Az status=0009 Ze status=0008 14:26:04 Check angles 14:26:04 SkyScan query 14:26:05 SkyScan query done: ret=0 az=171.57<-11438 ze=-6.495<-12433 Statuses=0009 0008 14:26:05 Msec=1500 True Az=171.57 Ze=-6.495 Az status=0009 Ze status=0008 14:26:05 Check angles 14:26:05 SkyScan query 14:26:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:26:05 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:26:05 Message to Master queued w/err=0: serial=126731 error=0 14:26:10 Received message from Master: op=Filter serial=126732 14:26:10 Color wheel filter change from 0 to 0 14:26:10 FLIGetFilterPos err=0 currentPosition=0 14:26:10 FLIGetStepsRemaining err=0 RemainingSteps=0 14:26:10 Filter is already there-color wheel unchanged 14:26:10 Received message from Master: op=Shutter serial=126733 14:26:10 Shutter LASER close 14:26:11 Received message from Camera: op=State serial=126735 14:26:11 GetSingleValue result=40 Value=cccccccc 14:26:11 SkyScan query 14:26:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:26:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:11 Parameters OK 14:26:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:11 Set A/D data flow result=40 14:26:11 Set A/D channel type result=40 14:26:11 Set A/D encoding result=40 14:26:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:11 Set channel filter=0.000000e+000 result=40 14:26:11 Config A/D Result=40 14:26:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:11 Get A/D filter: -9.255963e+061 result=40 14:26:11 Get A/D value=-858993460 result=40 14:26:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:11 Parameters OK 14:26:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:11 Set A/D data flow result=40 14:26:11 Set A/D channel type result=40 14:26:11 Set A/D encoding result=40 14:26:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:11 Set channel filter=0.000000e+000 result=40 14:26:11 Config A/D Result=40 14:26:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:11 Get A/D filter: -9.255963e+061 result=40 14:26:11 Get A/D value=-858993460 result=40 14:26:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:26:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:26:11 Aux= 14:26:11 Message to Camera, serial 126735 queued 14:26:48 Received message from Master: op=PointingHead serial=126748 14:26:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:26:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:26:48 Point started: ret=0 14:26:48 point_skyscan result=0 14:26:49 Check angles 14:26:49 SkyScan query 14:26:50 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 14:26:50 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 14:26:50 Check angles 14:26:50 SkyScan query 14:26:50 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 14:26:50 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 14:26:51 Check angles 14:26:51 SkyScan query 14:26:51 SkyScan query done: ret=0 az=117.66<-7844 ze=6.495<-11567 Statuses=0009 0008 14:26:51 Msec=1500 True Az=117.66 Ze=6.495 Az status=0009 Ze status=0008 14:26:51 Check angles 14:26:51 SkyScan query 14:26:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:26:52 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:26:52 Message to Master queued w/err=0: serial=126748 error=0 14:26:57 Received message from Master: op=Filter serial=126749 14:26:57 Color wheel filter change from 0 to 0 14:26:57 FLIGetFilterPos err=0 currentPosition=0 14:26:57 FLIGetStepsRemaining err=0 RemainingSteps=0 14:26:57 Filter is already there-color wheel unchanged 14:26:57 Received message from Master: op=Shutter serial=126750 14:26:57 Shutter LASER close 14:26:57 Received message from Camera: op=State serial=126752 14:26:57 GetSingleValue result=40 Value=cccccccc 14:26:57 SkyScan query 14:26:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:26:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:58 Parameters OK 14:26:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:58 Set A/D data flow result=40 14:26:58 Set A/D channel type result=40 14:26:58 Set A/D encoding result=40 14:26:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:58 Set channel filter=0.000000e+000 result=40 14:26:58 Config A/D Result=40 14:26:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:58 Get A/D filter: -9.255963e+061 result=40 14:26:58 Get A/D value=-858993460 result=40 14:26:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:58 Parameters OK 14:26:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:58 Set A/D data flow result=40 14:26:58 Set A/D channel type result=40 14:26:58 Set A/D encoding result=40 14:26:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:58 Set channel filter=0.000000e+000 result=40 14:26:58 Config A/D Result=40 14:26:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:58 Get A/D filter: -9.255963e+061 result=40 14:26:58 Get A/D value=-858993460 result=40 14:26:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:26:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:26:58 Aux= 14:26:58 Message to Camera, serial 126752 queued 14:27:34 Received message from Master: op=PointingHead serial=126765 14:27:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:27:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:27:35 Point started: ret=0 14:27:35 point_skyscan result=0 14:27:36 Check angles 14:27:36 SkyScan query 14:27:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.505<-13567 Statuses=0008 0009 14:27:36 Msec=0 True Az=112.995 Ze=-23.505 Az status=0008 Ze status=0009 14:27:36 Check angles 14:27:36 SkyScan query 14:27:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 14:27:37 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 14:27:37 Check angles 14:27:37 SkyScan query 14:27:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.835<-16389 Statuses=0008 0009 14:27:38 Msec=1500 True Az=112.995 Ze=-65.835 Az status=0008 Ze status=0009 14:27:38 Check angles 14:27:38 SkyScan query 14:27:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.805<-17787 Statuses=0008 0009 14:27:38 Msec=2250 True Az=112.995 Ze=-86.805 Az status=0008 Ze status=0009 14:27:39 Check angles 14:27:39 SkyScan query 14:27:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 14:27:39 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 14:27:39 Check angles 14:27:39 SkyScan query 14:27:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.165<-20611 Statuses=0008 0009 14:27:40 Msec=3750 True Az=112.995 Ze=-129.165 Az status=0008 Ze status=0009 14:27:40 Check angles 14:27:40 SkyScan query 14:27:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.105<-22007 Statuses=0008 0009 14:27:41 Msec=4500 True Az=112.995 Ze=-150.105 Az status=0008 Ze status=0009 14:27:41 Check angles 14:27:41 SkyScan query 14:27:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.955<-23397 Statuses=0008 0009 14:27:41 Msec=5250 True Az=112.995 Ze=-170.955 Az status=0008 Ze status=0009 14:27:42 Check angles 14:27:42 SkyScan query 14:27:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:27:42 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:27:42 Message to Master queued w/err=0: serial=126765 error=0 14:27:47 Received message from Master: op=Filter serial=126766 14:27:47 Color wheel filter change from 0 to 0 14:27:47 FLIGetFilterPos err=0 currentPosition=0 14:27:47 FLIGetStepsRemaining err=0 RemainingSteps=0 14:27:47 Filter is already there-color wheel unchanged 14:27:47 Received message from Master: op=Shutter serial=126767 14:27:47 Shutter LASER open 14:27:48 Received message from Camera: op=State serial=126769 14:27:48 GetSingleValue result=40 Value=cccccccc 14:27:48 SkyScan query 14:27:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:27:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:48 Parameters OK 14:27:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:48 Set A/D data flow result=40 14:27:48 Set A/D channel type result=40 14:27:48 Set A/D encoding result=40 14:27:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:48 Set channel filter=0.000000e+000 result=40 14:27:48 Config A/D Result=40 14:27:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:48 Get A/D filter: -9.255963e+061 result=40 14:27:48 Get A/D value=-858993460 result=40 14:27:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:48 Parameters OK 14:27:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:48 Set A/D data flow result=40 14:27:48 Set A/D channel type result=40 14:27:48 Set A/D encoding result=40 14:27:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:48 Set channel filter=0.000000e+000 result=40 14:27:48 Config A/D Result=40 14:27:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:48 Get A/D filter: -9.255963e+061 result=40 14:27:48 Get A/D value=-858993460 result=40 14:27:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:27:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:27:48 Aux= 14:27:48 Message to Camera, serial 126769 queued 14:27:57 Received message from Master: op=Shutter serial=126779 14:27:57 Shutter LASER close 14:27:57 Received message from Master: op=PointingHead serial=126783 14:27:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:27:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:27:57 Point started: ret=0 14:27:57 point_skyscan result=0 14:27:58 Check angles 14:27:58 SkyScan query 14:27:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.725<-21515 Statuses=0008 0009 14:27:59 Msec=0 True Az=112.995 Ze=-142.725 Az status=0008 Ze status=0009 14:27:59 Check angles 14:27:59 SkyScan query 14:27:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.725<-20115 Statuses=0008 0009 14:27:59 Msec=750 True Az=112.995 Ze=-121.725 Az status=0008 Ze status=0009 14:28:00 Check angles 14:28:00 SkyScan query 14:28:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.785<-18719 Statuses=0008 0009 14:28:00 Msec=1500 True Az=112.995 Ze=-100.785 Az status=0008 Ze status=0009 14:28:00 Check angles 14:28:00 SkyScan query 14:28:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.305<-17287 Statuses=0008 0009 14:28:01 Msec=2250 True Az=112.995 Ze=-79.305 Az status=0008 Ze status=0009 14:28:01 Check angles 14:28:01 SkyScan query 14:28:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.365<-15891 Statuses=0008 0009 14:28:02 Msec=3000 True Az=112.995 Ze=-58.365 Az status=0008 Ze status=0009 14:28:02 Check angles 14:28:02 SkyScan query 14:28:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.455<-14497 Statuses=0008 0009 14:28:02 Msec=3750 True Az=112.995 Ze=-37.455 Az status=0008 Ze status=0009 14:28:03 Check angles 14:28:03 SkyScan query 14:28:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.5<-13100 Statuses=0008 0009 14:28:03 Msec=4500 True Az=112.995 Ze=-16.5 Az status=0008 Ze status=0009 14:28:03 Check angles 14:28:03 SkyScan query 14:28:04 SkyScan query done: ret=0 az=113.01<-7534 ze=4.365<-11709 Statuses=0008 0009 14:28:04 Msec=5250 True Az=113.01 Ze=4.365 Az status=0008 Ze status=0009 14:28:04 Check angles 14:28:04 SkyScan query 14:28:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:28:05 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:28:05 Message to Master queued w/err=0: serial=126783 error=0 14:28:10 Received message from Master: op=Filter serial=126784 14:28:10 Color wheel filter change from 0 to 0 14:28:10 FLIGetFilterPos err=0 currentPosition=0 14:28:10 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:10 Filter is already there-color wheel unchanged 14:28:10 Received message from Master: op=Shutter serial=126785 14:28:10 Shutter LASER close 14:28:10 Received message from Camera: op=State serial=126787 14:28:10 GetSingleValue result=40 Value=cccccccc 14:28:10 SkyScan query 14:28:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:28:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:11 Parameters OK 14:28:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:11 Set A/D data flow result=40 14:28:11 Set A/D channel type result=40 14:28:11 Set A/D encoding result=40 14:28:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:11 Set channel filter=0.000000e+000 result=40 14:28:11 Config A/D Result=40 14:28:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:11 Get A/D filter: -9.255963e+061 result=40 14:28:11 Get A/D value=-858993460 result=40 14:28:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:11 Parameters OK 14:28:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:11 Set A/D data flow result=40 14:28:11 Set A/D channel type result=40 14:28:11 Set A/D encoding result=40 14:28:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:11 Set channel filter=0.000000e+000 result=40 14:28:11 Config A/D Result=40 14:28:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:11 Get A/D filter: -9.255963e+061 result=40 14:28:11 Get A/D value=-858993460 result=40 14:28:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:11 Aux= 14:28:11 Message to Camera, serial 126787 queued 14:28:47 Received message from Master: op=PointingHead serial=126800 14:28:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:28:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:28:48 Point started: ret=0 14:28:48 point_skyscan result=0 14:28:49 Check angles 14:28:49 SkyScan query 14:28:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:28:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:28:49 Message to Master queued w/err=0: serial=126800 error=0 14:28:54 Received message from Master: op=Filter serial=126801 14:28:54 Color wheel filter change from 0 to 0 14:28:54 FLIGetFilterPos err=0 currentPosition=0 14:28:54 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:54 Filter is already there-color wheel unchanged 14:28:54 Received message from Master: op=Shutter serial=126802 14:28:54 Shutter LASER close 14:28:54 Received message from Camera: op=State serial=126804 14:28:54 GetSingleValue result=40 Value=cccccccc 14:28:54 SkyScan query 14:28:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:28:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:55 Parameters OK 14:28:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:55 Set A/D data flow result=40 14:28:55 Set A/D channel type result=40 14:28:55 Set A/D encoding result=40 14:28:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:55 Set channel filter=0.000000e+000 result=40 14:28:55 Config A/D Result=40 14:28:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:55 Get A/D filter: -9.255963e+061 result=40 14:28:55 Get A/D value=-858993460 result=40 14:28:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:55 Parameters OK 14:28:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:55 Set A/D data flow result=40 14:28:55 Set A/D channel type result=40 14:28:55 Set A/D encoding result=40 14:28:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:55 Set channel filter=0.000000e+000 result=40 14:28:55 Config A/D Result=40 14:28:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:55 Get A/D filter: -9.255963e+061 result=40 14:28:55 Get A/D value=-858993460 result=40 14:28:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:55 Aux= 14:28:55 Message to Camera, serial 126804 queued 14:29:32 Received message from Master: op=PointingHead serial=126817 14:29:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:29:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:29:32 Point started: ret=0 14:29:32 point_skyscan result=0 14:29:33 Check angles 14:29:33 SkyScan query 14:29:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:29:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:29:33 Message to Master queued w/err=0: serial=126817 error=0 14:29:38 Received message from Master: op=Filter serial=126818 14:29:38 Color wheel filter change from 0 to 0 14:29:38 FLIGetFilterPos err=0 currentPosition=0 14:29:38 FLIGetStepsRemaining err=0 RemainingSteps=0 14:29:38 Filter is already there-color wheel unchanged 14:29:39 Received message from Master: op=Shutter serial=126819 14:29:39 Shutter LASER close 14:29:39 Received message from Camera: op=State serial=126821 14:29:39 GetSingleValue result=40 Value=cccccccc 14:29:39 SkyScan query 14:29:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:29:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:39 Parameters OK 14:29:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:39 Set A/D data flow result=40 14:29:39 Set A/D channel type result=40 14:29:39 Set A/D encoding result=40 14:29:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:39 Set channel filter=0.000000e+000 result=40 14:29:39 Config A/D Result=40 14:29:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:39 Get A/D filter: -9.255963e+061 result=40 14:29:39 Get A/D value=-858993460 result=40 14:29:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:39 Parameters OK 14:29:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:39 Set A/D data flow result=40 14:29:39 Set A/D channel type result=40 14:29:39 Set A/D encoding result=40 14:29:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:39 Set channel filter=0.000000e+000 result=40 14:29:39 Config A/D Result=40 14:29:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:39 Get A/D filter: -9.255963e+061 result=40 14:29:39 Get A/D value=-858993460 result=40 14:29:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:29:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:29:39 Aux= 14:29:39 Message to Camera, serial 126821 queued 14:30:16 Received message from Master: op=PointingHead serial=126834 14:30:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:30:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:30:16 Point started: ret=0 14:30:16 point_skyscan result=0 14:30:17 Check angles 14:30:17 SkyScan query 14:30:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:30:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:30:18 Message to Master queued w/err=0: serial=126834 error=0 14:30:23 Received message from Master: op=Filter serial=126835 14:30:23 Color wheel filter change from 0 to 0 14:30:23 FLIGetFilterPos err=0 currentPosition=0 14:30:23 FLIGetStepsRemaining err=0 RemainingSteps=0 14:30:23 Filter is already there-color wheel unchanged 14:30:23 Received message from Master: op=Shutter serial=126836 14:30:23 Shutter LASER close 14:30:23 Received message from Camera: op=State serial=126838 14:30:23 GetSingleValue result=40 Value=cccccccc 14:30:23 SkyScan query 14:30:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:30:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:23 Parameters OK 14:30:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:23 Set A/D data flow result=40 14:30:23 Set A/D channel type result=40 14:30:23 Set A/D encoding result=40 14:30:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:23 Set channel filter=0.000000e+000 result=40 14:30:23 Config A/D Result=40 14:30:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:23 Get A/D filter: -9.255963e+061 result=40 14:30:23 Get A/D value=-858993460 result=40 14:30:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:23 Parameters OK 14:30:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:23 Set A/D data flow result=40 14:30:23 Set A/D channel type result=40 14:30:23 Set A/D encoding result=40 14:30:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:23 Set channel filter=0.000000e+000 result=40 14:30:23 Config A/D Result=40 14:30:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:23 Get A/D filter: -9.255963e+061 result=40 14:30:23 Get A/D value=-858993460 result=40 14:30:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:30:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:30:23 Aux= 14:30:23 Message to Camera, serial 126838 queued 14:31:00 Received message from Master: op=PointingHead serial=126851 14:31:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:31:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:31:01 Point started: ret=0 14:31:01 point_skyscan result=0 14:31:01 Check angles 14:31:01 SkyScan query 14:31:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.64<-13576 Statuses=0008 0009 14:31:02 Msec=0 True Az=112.995 Ze=-23.64 Az status=0008 Ze status=0009 14:31:02 Check angles 14:31:02 SkyScan query 14:31:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.58<-14972 Statuses=0008 0009 14:31:03 Msec=750 True Az=112.995 Ze=-44.58 Az status=0008 Ze status=0009 14:31:03 Check angles 14:31:03 SkyScan query 14:31:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 14:31:04 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 14:31:04 Check angles 14:31:04 SkyScan query 14:31:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.49<-17766 Statuses=0008 0009 14:31:04 Msec=2250 True Az=112.995 Ze=-86.49 Az status=0008 Ze status=0009 14:31:04 Check angles 14:31:04 SkyScan query 14:31:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.445<-19163 Statuses=0008 0009 14:31:05 Msec=3000 True Az=112.995 Ze=-107.445 Az status=0008 Ze status=0009 14:31:05 Check angles 14:31:05 SkyScan query 14:31:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.415<-20561 Statuses=0008 0009 14:31:06 Msec=3750 True Az=112.995 Ze=-128.415 Az status=0008 Ze status=0009 14:31:06 Check angles 14:31:06 SkyScan query 14:31:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.4<-21960 Statuses=0008 0009 14:31:07 Msec=4500 True Az=112.995 Ze=-149.4 Az status=0008 Ze status=0009 14:31:07 Check angles 14:31:07 SkyScan query 14:31:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.34<-23356 Statuses=0008 0009 14:31:07 Msec=5250 True Az=112.995 Ze=-170.34 Az status=0008 Ze status=0009 14:31:07 Check angles 14:31:07 SkyScan query 14:31:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:31:08 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:31:08 Message to Master queued w/err=0: serial=126851 error=0 14:31:13 Received message from Master: op=Filter serial=126852 14:31:13 Color wheel filter change from 0 to 0 14:31:13 FLIGetFilterPos err=0 currentPosition=0 14:31:13 FLIGetStepsRemaining err=0 RemainingSteps=0 14:31:13 Filter is already there-color wheel unchanged 14:31:13 Received message from Master: op=Shutter serial=126853 14:31:13 Shutter LASER open 14:31:13 Received message from Camera: op=State serial=126855 14:31:13 GetSingleValue result=40 Value=cccccccc 14:31:13 SkyScan query 14:31:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:31:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:14 Parameters OK 14:31:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:14 Set A/D data flow result=40 14:31:14 Set A/D channel type result=40 14:31:14 Set A/D encoding result=40 14:31:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:14 Set channel filter=0.000000e+000 result=40 14:31:14 Config A/D Result=40 14:31:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:14 Get A/D filter: -9.255963e+061 result=40 14:31:14 Get A/D value=-858993460 result=40 14:31:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:14 Parameters OK 14:31:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:14 Set A/D data flow result=40 14:31:14 Set A/D channel type result=40 14:31:14 Set A/D encoding result=40 14:31:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:14 Set channel filter=0.000000e+000 result=40 14:31:14 Config A/D Result=40 14:31:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:14 Get A/D filter: -9.255963e+061 result=40 14:31:14 Get A/D value=-858993460 result=40 14:31:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:31:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:31:14 Aux= 14:31:14 Message to Camera, serial 126855 queued 14:31:22 Received message from Master: op=Shutter serial=126865 14:31:22 Shutter LASER close 14:31:23 Received message from Master: op=PointingHead serial=126869 14:31:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:31:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:31:23 Point started: ret=0 14:31:23 point_skyscan result=0 14:31:24 Check angles 14:31:24 SkyScan query 14:31:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 14:31:25 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 14:31:25 Check angles 14:31:25 SkyScan query 14:31:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 14:31:25 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 14:31:26 Check angles 14:31:26 SkyScan query 14:31:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 14:31:26 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 14:31:26 Check angles 14:31:26 SkyScan query 14:31:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.92<-17328 Statuses=0008 0009 14:31:27 Msec=2250 True Az=112.995 Ze=-79.92 Az status=0008 Ze status=0009 14:31:27 Check angles 14:31:27 SkyScan query 14:31:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.965<-15931 Statuses=0008 0009 14:31:28 Msec=3000 True Az=112.995 Ze=-58.965 Az status=0008 Ze status=0009 14:31:28 Check angles 14:31:28 SkyScan query 14:31:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.95<-14530 Statuses=0008 0009 14:31:28 Msec=3750 True Az=112.995 Ze=-37.95 Az status=0008 Ze status=0009 14:31:29 Check angles 14:31:29 SkyScan query 14:31:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.995<-13133 Statuses=0008 0009 14:31:29 Msec=4500 True Az=112.995 Ze=-16.995 Az status=0008 Ze status=0009 14:31:29 Check angles 14:31:29 SkyScan query 14:31:30 SkyScan query done: ret=0 az=112.995<-7533 ze=3.93<-11738 Statuses=0008 0009 14:31:30 Msec=5250 True Az=112.995 Ze=3.93 Az status=0008 Ze status=0009 14:31:30 Check angles 14:31:30 SkyScan query 14:31:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:31:31 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:31:31 Message to Master queued w/err=0: serial=126869 error=0 14:31:36 Received message from Master: op=Filter serial=126870 14:31:36 Color wheel filter change from 0 to 0 14:31:36 FLIGetFilterPos err=0 currentPosition=0 14:31:36 FLIGetStepsRemaining err=0 RemainingSteps=0 14:31:36 Filter is already there-color wheel unchanged 14:31:36 Received message from Master: op=Shutter serial=126871 14:31:36 Shutter LASER close 14:31:36 Received message from Camera: op=State serial=126873 14:31:36 GetSingleValue result=40 Value=cccccccc 14:31:36 SkyScan query 14:31:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:31:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:37 Parameters OK 14:31:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:37 Set A/D data flow result=40 14:31:37 Set A/D channel type result=40 14:31:37 Set A/D encoding result=40 14:31:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:37 Set channel filter=0.000000e+000 result=40 14:31:37 Config A/D Result=40 14:31:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:37 Get A/D filter: -9.255963e+061 result=40 14:31:37 Get A/D value=-858993460 result=40 14:31:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:37 Parameters OK 14:31:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:37 Set A/D data flow result=40 14:31:37 Set A/D channel type result=40 14:31:37 Set A/D encoding result=40 14:31:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:37 Set channel filter=0.000000e+000 result=40 14:31:37 Config A/D Result=40 14:31:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:37 Get A/D filter: -9.255963e+061 result=40 14:31:37 Get A/D value=-858993460 result=40 14:31:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:31:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:31:37 Aux= 14:31:37 Message to Camera, serial 126873 queued 14:32:13 Received message from Master: op=PointingHead serial=126886 14:32:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:32:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:32:14 Point started: ret=0 14:32:14 point_skyscan result=0 14:32:15 Check angles 14:32:15 SkyScan query 14:32:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:32:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:32:15 Message to Master queued w/err=0: serial=126886 error=0 14:32:20 Received message from Master: op=Filter serial=126887 14:32:20 Color wheel filter change from 0 to 0 14:32:20 FLIGetFilterPos err=0 currentPosition=0 14:32:20 FLIGetStepsRemaining err=0 RemainingSteps=0 14:32:20 Filter is already there-color wheel unchanged 14:32:20 Received message from Master: op=Shutter serial=126888 14:32:20 Shutter LASER close 14:32:20 Received message from Camera: op=State serial=126890 14:32:20 GetSingleValue result=40 Value=cccccccc 14:32:20 SkyScan query 14:32:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:32:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:21 Parameters OK 14:32:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:21 Set A/D data flow result=40 14:32:21 Set A/D channel type result=40 14:32:21 Set A/D encoding result=40 14:32:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:21 Set channel filter=0.000000e+000 result=40 14:32:21 Config A/D Result=40 14:32:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:21 Get A/D filter: -9.255963e+061 result=40 14:32:21 Get A/D value=-858993460 result=40 14:32:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:21 Parameters OK 14:32:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:21 Set A/D data flow result=40 14:32:21 Set A/D channel type result=40 14:32:21 Set A/D encoding result=40 14:32:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:21 Set channel filter=0.000000e+000 result=40 14:32:21 Config A/D Result=40 14:32:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:21 Get A/D filter: -9.255963e+061 result=40 14:32:21 Get A/D value=-858993460 result=40 14:32:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:32:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:32:21 Aux= 14:32:21 Message to Camera, serial 126890 queued 14:32:58 Received message from Master: op=PointingHead serial=126903 14:32:58 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:32:58 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:32:58 Point started: ret=0 14:32:58 point_skyscan result=0 14:32:59 Check angles 14:32:59 SkyScan query 14:32:59 SkyScan query done: ret=0 az=135.735<-9049 ze=-6.51<-12434 Statuses=0009 0008 14:32:59 Msec=0 True Az=135.735 Ze=-6.51 Az status=0009 Ze status=0008 14:33:00 Check angles 14:33:00 SkyScan query 14:33:00 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.51<-12434 Statuses=0009 0008 14:33:00 Msec=750 True Az=153.525 Ze=-6.51 Az status=0009 Ze status=0008 14:33:00 Check angles 14:33:00 SkyScan query 14:33:01 SkyScan query done: ret=0 az=171<-11400 ze=-6.495<-12433 Statuses=0009 0008 14:33:01 Msec=1500 True Az=171 Ze=-6.495 Az status=0009 Ze status=0008 14:33:01 Check angles 14:33:01 SkyScan query 14:33:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:33:02 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:33:02 Message to Master queued w/err=0: serial=126903 error=0 14:33:07 Received message from Master: op=Filter serial=126904 14:33:07 Color wheel filter change from 0 to 0 14:33:07 FLIGetFilterPos err=0 currentPosition=0 14:33:07 FLIGetStepsRemaining err=0 RemainingSteps=0 14:33:07 Filter is already there-color wheel unchanged 14:33:07 Received message from Master: op=Shutter serial=126905 14:33:07 Shutter LASER close 14:33:07 Received message from Camera: op=State serial=126907 14:33:07 GetSingleValue result=40 Value=cccccccc 14:33:07 SkyScan query 14:33:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:33:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:07 Parameters OK 14:33:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:07 Set A/D data flow result=40 14:33:07 Set A/D channel type result=40 14:33:07 Set A/D encoding result=40 14:33:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:07 Set channel filter=0.000000e+000 result=40 14:33:07 Config A/D Result=40 14:33:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:07 Get A/D filter: -9.255963e+061 result=40 14:33:07 Get A/D value=-858993460 result=40 14:33:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:07 Parameters OK 14:33:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:07 Set A/D data flow result=40 14:33:07 Set A/D channel type result=40 14:33:07 Set A/D encoding result=40 14:33:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:07 Set channel filter=0.000000e+000 result=40 14:33:07 Config A/D Result=40 14:33:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:07 Get A/D filter: -9.255963e+061 result=40 14:33:07 Get A/D value=-858993460 result=40 14:33:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:33:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:33:07 Aux= 14:33:07 Message to Camera, serial 126907 queued 14:33:38 Received message from Master: op=Identify serial=126910 14:33:44 Received message from Master: op=PointingHead serial=126923 14:33:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:33:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:33:45 Point started: ret=0 14:33:45 point_skyscan result=0 14:33:45 Check angles 14:33:45 SkyScan query 14:33:46 SkyScan query done: ret=0 az=152.775<-10185 ze=6.51<-11566 Statuses=0009 0008 14:33:46 Msec=0 True Az=152.775 Ze=6.51 Az status=0009 Ze status=0008 14:33:46 Check angles 14:33:46 SkyScan query 14:33:47 SkyScan query done: ret=0 az=135.165<-9011 ze=6.495<-11567 Statuses=0009 0008 14:33:47 Msec=750 True Az=135.165 Ze=6.495 Az status=0009 Ze status=0008 14:33:47 Check angles 14:33:47 SkyScan query 14:33:47 SkyScan query done: ret=0 az=117.855<-7857 ze=6.495<-11567 Statuses=0009 0008 14:33:47 Msec=1500 True Az=117.855 Ze=6.495 Az status=0009 Ze status=0008 14:33:48 Check angles 14:33:48 SkyScan query 14:33:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:33:48 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:33:48 Message to Master queued w/err=0: serial=126923 error=0 14:33:53 Received message from Master: op=Filter serial=126924 14:33:53 Color wheel filter change from 0 to 0 14:33:53 FLIGetFilterPos err=0 currentPosition=0 14:33:53 FLIGetStepsRemaining err=0 RemainingSteps=0 14:33:53 Filter is already there-color wheel unchanged 14:33:53 Received message from Master: op=Shutter serial=126925 14:33:53 Shutter LASER close 14:33:53 Received message from Camera: op=State serial=126927 14:33:53 GetSingleValue result=40 Value=cccccccc 14:33:53 SkyScan query 14:33:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:33:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:54 Parameters OK 14:33:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:54 Set A/D data flow result=40 14:33:54 Set A/D channel type result=40 14:33:54 Set A/D encoding result=40 14:33:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:54 Set channel filter=0.000000e+000 result=40 14:33:54 Config A/D Result=40 14:33:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:54 Get A/D filter: -9.255963e+061 result=40 14:33:54 Get A/D value=-858993460 result=40 14:33:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:54 Parameters OK 14:33:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:54 Set A/D data flow result=40 [UTC 2019-3-5 14:33:54] 14:33:54 Set A/D channel type result=40 14:33:54 Set A/D encoding result=40 14:33:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:54 Set channel filter=0.000000e+000 result=40 14:33:54 Config A/D Result=40 14:33:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:54 Get A/D filter: -9.255963e+061 result=40 14:33:54 Get A/D value=-858993460 result=40 14:33:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:33:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:33:54 Aux= 14:33:54 Message to Camera, serial 126927 queued 14:34:31 Received message from Master: op=PointingHead serial=126940 14:34:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:34:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:34:31 Point started: ret=0 14:34:31 point_skyscan result=0 14:34:32 Check angles 14:34:32 SkyScan query 14:34:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.505<-13567 Statuses=0008 0009 14:34:33 Msec=0 True Az=112.995 Ze=-23.505 Az status=0008 Ze status=0009 14:34:33 Check angles 14:34:33 SkyScan query 14:34:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.835<-14989 Statuses=0008 0009 14:34:33 Msec=750 True Az=112.995 Ze=-44.835 Az status=0008 Ze status=0009 14:34:33 Check angles 14:34:33 SkyScan query 14:34:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.805<-16387 Statuses=0008 0009 14:34:34 Msec=1500 True Az=112.995 Ze=-65.805 Az status=0008 Ze status=0009 14:34:34 Check angles 14:34:34 SkyScan query 14:34:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.775<-17785 Statuses=0008 0009 14:34:35 Msec=2250 True Az=112.995 Ze=-86.775 Az status=0008 Ze status=0009 14:34:35 Check angles 14:34:35 SkyScan query 14:34:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.24<-19216 Statuses=0008 0009 14:34:36 Msec=3000 True Az=112.995 Ze=-108.24 Az status=0008 Ze status=0009 14:34:36 Check angles 14:34:36 SkyScan query 14:34:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.15<-20610 Statuses=0008 0009 14:34:36 Msec=3750 True Az=112.995 Ze=-129.15 Az status=0008 Ze status=0009 14:34:36 Check angles 14:34:36 SkyScan query 14:34:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.105<-22007 Statuses=0008 0009 14:34:37 Msec=4500 True Az=112.995 Ze=-150.105 Az status=0008 Ze status=0009 14:34:37 Check angles 14:34:37 SkyScan query 14:34:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.24<-23416 Statuses=0008 0009 14:34:38 Msec=5250 True Az=112.995 Ze=-171.24 Az status=0008 Ze status=0009 14:34:38 Check angles 14:34:38 SkyScan query 14:34:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:34:39 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:34:39 Message to Master queued w/err=0: serial=126940 error=0 14:34:44 Received message from Master: op=Filter serial=126941 14:34:44 Color wheel filter change from 0 to 0 14:34:44 FLIGetFilterPos err=0 currentPosition=0 14:34:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:34:44 Filter is already there-color wheel unchanged 14:34:44 Received message from Master: op=Shutter serial=126942 14:34:44 Shutter LASER open 14:34:44 Received message from Camera: op=State serial=126944 14:34:44 GetSingleValue result=40 Value=cccccccc 14:34:44 SkyScan query 14:34:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:34:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:44 Parameters OK 14:34:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:44 Set A/D data flow result=40 14:34:44 Set A/D channel type result=40 14:34:44 Set A/D encoding result=40 14:34:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:44 Set channel filter=0.000000e+000 result=40 14:34:44 Config A/D Result=40 14:34:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:44 Get A/D filter: -9.255963e+061 result=40 14:34:44 Get A/D value=-858993460 result=40 14:34:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:44 Parameters OK 14:34:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:44 Set A/D data flow result=40 14:34:44 Set A/D channel type result=40 14:34:44 Set A/D encoding result=40 14:34:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:44 Set channel filter=0.000000e+000 result=40 14:34:44 Config A/D Result=40 14:34:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:44 Get A/D filter: -9.255963e+061 result=40 14:34:44 Get A/D value=-858993460 result=40 14:34:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:34:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:34:44 Aux= 14:34:44 Message to Camera, serial 126944 queued 14:34:53 Received message from Master: op=Shutter serial=126954 14:34:53 Shutter LASER close 14:34:53 Received message from Master: op=PointingHead serial=126958 14:34:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:34:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:34:54 Point started: ret=0 14:34:54 point_skyscan result=0 14:34:54 Check angles 14:34:54 SkyScan query 14:34:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 14:34:55 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 14:34:55 Check angles 14:34:55 SkyScan query 14:34:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.295<-20153 Statuses=0008 0009 14:34:56 Msec=750 True Az=112.995 Ze=-122.295 Az status=0008 Ze status=0009 14:34:56 Check angles 14:34:56 SkyScan query 14:34:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 14:34:57 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 14:34:57 Check angles 14:34:57 SkyScan query 14:34:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.92<-17328 Statuses=0008 0009 14:34:57 Msec=2250 True Az=112.995 Ze=-79.92 Az status=0008 Ze status=0009 14:34:57 Check angles 14:34:57 SkyScan query 14:34:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.965<-15931 Statuses=0008 0009 14:34:58 Msec=3000 True Az=112.995 Ze=-58.965 Az status=0008 Ze status=0009 14:34:58 Check angles 14:34:58 SkyScan query 14:34:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.935<-14529 Statuses=0008 0009 14:34:59 Msec=3750 True Az=112.995 Ze=-37.935 Az status=0008 Ze status=0009 14:34:59 Check angles 14:34:59 SkyScan query 14:35:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.98<-13132 Statuses=0008 0009 14:35:00 Msec=4500 True Az=112.995 Ze=-16.98 Az status=0008 Ze status=0009 14:35:00 Check angles 14:35:00 SkyScan query 14:35:00 SkyScan query done: ret=0 az=112.995<-7533 ze=3.96<-11736 Statuses=0008 0009 14:35:00 Msec=5250 True Az=112.995 Ze=3.96 Az status=0008 Ze status=0009 14:35:00 Check angles 14:35:00 SkyScan query 14:35:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:35:01 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:35:01 Message to Master queued w/err=0: serial=126958 error=0 14:35:06 Received message from Master: op=Filter serial=126959 14:35:06 Color wheel filter change from 0 to 0 14:35:06 FLIGetFilterPos err=0 currentPosition=0 14:35:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:06 Filter is already there-color wheel unchanged 14:35:06 Received message from Master: op=Shutter serial=126960 14:35:06 Shutter LASER close 14:35:06 Received message from Camera: op=State serial=126962 14:35:06 GetSingleValue result=40 Value=cccccccc 14:35:06 SkyScan query 14:35:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:35:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:07 Parameters OK 14:35:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:07 Set A/D data flow result=40 14:35:07 Set A/D channel type result=40 14:35:07 Set A/D encoding result=40 14:35:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:07 Set channel filter=0.000000e+000 result=40 14:35:07 Config A/D Result=40 14:35:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:07 Get A/D filter: -9.255963e+061 result=40 14:35:07 Get A/D value=-858993460 result=40 14:35:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:07 Parameters OK 14:35:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:07 Set A/D data flow result=40 14:35:07 Set A/D channel type result=40 14:35:07 Set A/D encoding result=40 14:35:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:07 Set channel filter=0.000000e+000 result=40 14:35:07 Config A/D Result=40 14:35:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:07 Get A/D filter: -9.255963e+061 result=40 14:35:07 Get A/D value=-858993460 result=40 14:35:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:35:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:35:07 Aux= 14:35:07 Message to Camera, serial 126962 queued 14:35:43 Received message from Master: op=PointingHead serial=126974 14:35:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:35:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:35:43 Point started: ret=0 14:35:43 point_skyscan result=0 14:35:44 Check angles 14:35:44 SkyScan query 14:35:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:35:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:35:45 Message to Master queued w/err=0: serial=126974 error=0 14:35:50 Received message from Master: op=Filter serial=126975 14:35:50 Color wheel filter change from 0 to 0 14:35:50 FLIGetFilterPos err=0 currentPosition=0 14:35:50 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:50 Filter is already there-color wheel unchanged 14:35:50 Received message from Master: op=Shutter serial=126976 14:35:50 Shutter LASER close 14:35:50 Received message from Camera: op=State serial=126978 14:35:50 GetSingleValue result=40 Value=cccccccc 14:35:50 SkyScan query 14:35:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:35:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:50 Parameters OK 14:35:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:50 Set A/D data flow result=40 14:35:50 Set A/D channel type result=40 14:35:50 Set A/D encoding result=40 14:35:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:50 Set channel filter=0.000000e+000 result=40 14:35:50 Config A/D Result=40 14:35:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:50 Get A/D filter: -9.255963e+061 result=40 14:35:50 Get A/D value=-858993460 result=40 14:35:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:50 Parameters OK 14:35:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:50 Set A/D data flow result=40 14:35:50 Set A/D channel type result=40 14:35:50 Set A/D encoding result=40 14:35:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:50 Set channel filter=0.000000e+000 result=40 14:35:50 Config A/D Result=40 14:35:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:50 Get A/D filter: -9.255963e+061 result=40 14:35:50 Get A/D value=-858993460 result=40 14:35:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:35:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:35:50 Aux= 14:35:50 Message to Camera, serial 126978 queued 14:36:27 Received message from Master: op=PointingHead serial=126991 14:36:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:36:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:36:28 Point started: ret=0 14:36:28 point_skyscan result=0 14:36:28 Check angles 14:36:28 SkyScan query 14:36:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:36:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:36:29 Message to Master queued w/err=0: serial=126991 error=0 14:36:34 Received message from Master: op=Filter serial=126992 14:36:34 Color wheel filter change from 0 to 0 14:36:34 FLIGetFilterPos err=0 currentPosition=0 14:36:34 FLIGetStepsRemaining err=0 RemainingSteps=0 14:36:34 Filter is already there-color wheel unchanged 14:36:34 Received message from Master: op=Shutter serial=126993 14:36:34 Shutter LASER close 14:36:34 Received message from Camera: op=State serial=126995 14:36:34 GetSingleValue result=40 Value=cccccccc 14:36:34 SkyScan query 14:36:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:36:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:35 Parameters OK 14:36:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:35 Set A/D data flow result=40 14:36:35 Set A/D channel type result=40 14:36:35 Set A/D encoding result=40 14:36:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:35 Set channel filter=0.000000e+000 result=40 14:36:35 Config A/D Result=40 14:36:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:35 Get A/D filter: -9.255963e+061 result=40 14:36:35 Get A/D value=-858993460 result=40 14:36:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:35 Parameters OK 14:36:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:35 Set A/D data flow result=40 14:36:35 Set A/D channel type result=40 14:36:35 Set A/D encoding result=40 14:36:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:35 Set channel filter=0.000000e+000 result=40 14:36:35 Config A/D Result=40 14:36:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:35 Get A/D filter: -9.255963e+061 result=40 14:36:35 Get A/D value=-858993460 result=40 14:36:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:36:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:36:35 Aux= 14:36:35 Message to Camera, serial 126995 queued 14:37:11 Received message from Master: op=PointingHead serial=127008 14:37:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:37:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:37:12 Point started: ret=0 14:37:12 point_skyscan result=0 14:37:13 Check angles 14:37:13 SkyScan query 14:37:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:37:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:37:13 Message to Master queued w/err=0: serial=127008 error=0 14:37:18 Received message from Master: op=Filter serial=127009 14:37:18 Color wheel filter change from 0 to 0 14:37:18 FLIGetFilterPos err=0 currentPosition=0 14:37:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:18 Filter is already there-color wheel unchanged 14:37:18 Received message from Master: op=Shutter serial=127010 14:37:18 Shutter LASER close 14:37:18 Received message from Camera: op=State serial=127012 14:37:18 GetSingleValue result=40 Value=cccccccc 14:37:18 SkyScan query 14:37:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:37:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:19 Parameters OK 14:37:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:19 Set A/D data flow result=40 14:37:19 Set A/D channel type result=40 14:37:19 Set A/D encoding result=40 14:37:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:19 Set channel filter=0.000000e+000 result=40 14:37:19 Config A/D Result=40 14:37:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:19 Get A/D filter: -9.255963e+061 result=40 14:37:19 Get A/D value=-858993460 result=40 14:37:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:19 Parameters OK 14:37:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:19 Set A/D data flow result=40 14:37:19 Set A/D channel type result=40 14:37:19 Set A/D encoding result=40 14:37:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:19 Set channel filter=0.000000e+000 result=40 14:37:19 Config A/D Result=40 14:37:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:19 Get A/D filter: -9.255963e+061 result=40 14:37:19 Get A/D value=-858993460 result=40 14:37:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:37:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:37:19 Aux= 14:37:19 Message to Camera, serial 127012 queued 14:37:56 Received message from Master: op=PointingHead serial=127025 14:37:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:37:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:37:56 Point started: ret=0 14:37:56 point_skyscan result=0 14:37:57 Check angles 14:37:57 SkyScan query 14:37:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 14:37:57 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 14:37:58 Check angles 14:37:58 SkyScan query 14:37:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.325<-14955 Statuses=0008 0009 14:37:58 Msec=750 True Az=112.995 Ze=-44.325 Az status=0008 Ze status=0009 14:37:58 Check angles 14:37:58 SkyScan query 14:37:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.355<-16357 Statuses=0008 0009 14:37:59 Msec=1500 True Az=112.995 Ze=-65.355 Az status=0008 Ze status=0009 14:37:59 Check angles 14:37:59 SkyScan query 14:38:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.19<-17746 Statuses=0008 0009 14:38:00 Msec=2250 True Az=112.995 Ze=-86.19 Az status=0008 Ze status=0009 14:38:00 Check angles 14:38:00 SkyScan query 14:38:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.13<-19142 Statuses=0008 0009 14:38:00 Msec=3000 True Az=112.995 Ze=-107.13 Az status=0008 Ze status=0009 14:38:01 Check angles 14:38:01 SkyScan query 14:38:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.115<-20541 Statuses=0008 0009 14:38:01 Msec=3750 True Az=112.995 Ze=-128.115 Az status=0008 Ze status=0009 14:38:01 Check angles 14:38:01 SkyScan query 14:38:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.1<-21940 Statuses=0008 0009 14:38:02 Msec=4500 True Az=112.995 Ze=-149.1 Az status=0008 Ze status=0009 14:38:02 Check angles 14:38:02 SkyScan query 14:38:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.025<-23335 Statuses=0008 0009 14:38:03 Msec=5250 True Az=112.995 Ze=-170.025 Az status=0008 Ze status=0009 14:38:03 Check angles 14:38:03 SkyScan query 14:38:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:38:03 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:38:03 Message to Master queued w/err=0: serial=127025 error=0 14:38:08 Received message from Master: op=Filter serial=127026 14:38:08 Color wheel filter change from 0 to 0 14:38:08 FLIGetFilterPos err=0 currentPosition=0 14:38:08 FLIGetStepsRemaining err=0 RemainingSteps=0 14:38:08 Filter is already there-color wheel unchanged 14:38:09 Received message from Master: op=Shutter serial=127027 14:38:09 Shutter LASER open 14:38:09 Received message from Camera: op=State serial=127029 14:38:09 GetSingleValue result=40 Value=cccccccc 14:38:09 SkyScan query 14:38:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:38:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:09 Parameters OK 14:38:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:09 Set A/D data flow result=40 14:38:09 Set A/D channel type result=40 14:38:09 Set A/D encoding result=40 14:38:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:09 Set channel filter=0.000000e+000 result=40 14:38:09 Config A/D Result=40 14:38:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:09 Get A/D filter: -9.255963e+061 result=40 14:38:09 Get A/D value=-858993460 result=40 14:38:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:09 Parameters OK 14:38:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:09 Set A/D data flow result=40 14:38:09 Set A/D channel type result=40 14:38:09 Set A/D encoding result=40 14:38:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:09 Set channel filter=0.000000e+000 result=40 14:38:09 Config A/D Result=40 14:38:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:09 Get A/D filter: -9.255963e+061 result=40 14:38:09 Get A/D value=-858993460 result=40 14:38:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:38:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:38:09 Aux= 14:38:09 Message to Camera, serial 127029 queued 14:38:18 Received message from Master: op=Shutter serial=127039 14:38:18 Shutter LASER close 14:38:18 Received message from Master: op=PointingHead serial=127043 14:38:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:38:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:38:19 Point started: ret=0 14:38:19 point_skyscan result=0 14:38:19 Check angles 14:38:19 SkyScan query 14:38:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 14:38:20 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 14:38:20 Check angles 14:38:20 SkyScan query 14:38:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.22<-20148 Statuses=0008 0009 14:38:21 Msec=750 True Az=112.995 Ze=-122.22 Az status=0008 Ze status=0009 14:38:21 Check angles 14:38:21 SkyScan query 14:38:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.295<-18753 Statuses=0008 0009 14:38:22 Msec=1500 True Az=112.995 Ze=-101.295 Az status=0008 Ze status=0009 14:38:22 Check angles 14:38:22 SkyScan query 14:38:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.325<-17355 Statuses=0008 0009 14:38:22 Msec=2250 True Az=112.995 Ze=-80.325 Az status=0008 Ze status=0009 14:38:22 Check angles 14:38:22 SkyScan query 14:38:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.89<-15926 Statuses=0008 0009 14:38:23 Msec=3000 True Az=112.995 Ze=-58.89 Az status=0008 Ze status=0009 14:38:23 Check angles 14:38:23 SkyScan query 14:38:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.875<-14525 Statuses=0008 0009 14:38:24 Msec=3750 True Az=112.995 Ze=-37.875 Az status=0008 Ze status=0009 14:38:24 Check angles 14:38:24 SkyScan query 14:38:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.92<-13128 Statuses=0008 0009 14:38:25 Msec=4500 True Az=112.995 Ze=-16.92 Az status=0008 Ze status=0009 14:38:25 Check angles 14:38:25 SkyScan query 14:38:25 SkyScan query done: ret=0 az=113.01<-7534 ze=4.335<-11711 Statuses=0008 0009 14:38:25 Msec=5250 True Az=113.01 Ze=4.335 Az status=0008 Ze status=0009 14:38:25 Check angles 14:38:25 SkyScan query 14:38:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:38:26 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:38:26 Message to Master queued w/err=0: serial=127043 error=0 14:38:31 Received message from Master: op=Filter serial=127044 14:38:31 Color wheel filter change from 0 to 0 14:38:31 FLIGetFilterPos err=0 currentPosition=0 14:38:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:38:31 Filter is already there-color wheel unchanged 14:38:31 Received message from Master: op=Shutter serial=127045 14:38:31 Shutter LASER close 14:38:31 Received message from Camera: op=State serial=127047 14:38:31 GetSingleValue result=40 Value=cccccccc 14:38:31 SkyScan query 14:38:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:38:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:32 Parameters OK 14:38:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:32 Set A/D data flow result=40 14:38:32 Set A/D channel type result=40 14:38:32 Set A/D encoding result=40 14:38:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:32 Set channel filter=0.000000e+000 result=40 14:38:32 Config A/D Result=40 14:38:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:32 Get A/D filter: -9.255963e+061 result=40 14:38:32 Get A/D value=-858993460 result=40 14:38:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:32 Parameters OK 14:38:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:32 Set A/D data flow result=40 14:38:32 Set A/D channel type result=40 14:38:32 Set A/D encoding result=40 14:38:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:32 Set channel filter=0.000000e+000 result=40 14:38:32 Config A/D Result=40 14:38:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:32 Get A/D filter: -9.255963e+061 result=40 14:38:32 Get A/D value=-858993460 result=40 14:38:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:38:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:38:32 Aux= 14:38:32 Message to Camera, serial 127047 queued 14:39:09 Received message from Master: op=PointingHead serial=127060 14:39:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:39:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:39:09 Point started: ret=0 14:39:09 point_skyscan result=0 14:39:10 Check angles 14:39:10 SkyScan query 14:39:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:39:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:39:10 Message to Master queued w/err=0: serial=127060 error=0 14:39:15 Received message from Master: op=Filter serial=127061 14:39:15 Color wheel filter change from 0 to 0 14:39:15 FLIGetFilterPos err=0 currentPosition=0 14:39:15 FLIGetStepsRemaining err=0 RemainingSteps=0 14:39:15 Filter is already there-color wheel unchanged 14:39:16 Received message from Master: op=Shutter serial=127062 14:39:16 Shutter LASER close 14:39:16 Received message from Camera: op=State serial=127064 14:39:16 GetSingleValue result=40 Value=cccccccc 14:39:16 SkyScan query 14:39:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:39:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:16 Parameters OK 14:39:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:16 Set A/D data flow result=40 14:39:16 Set A/D channel type result=40 14:39:16 Set A/D encoding result=40 14:39:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:16 Set channel filter=0.000000e+000 result=40 14:39:16 Config A/D Result=40 14:39:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:16 Get A/D filter: -9.255963e+061 result=40 14:39:16 Get A/D value=-858993460 result=40 14:39:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:16 Parameters OK 14:39:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:16 Set A/D data flow result=40 14:39:16 Set A/D channel type result=40 14:39:16 Set A/D encoding result=40 14:39:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:16 Set channel filter=0.000000e+000 result=40 14:39:16 Config A/D Result=40 14:39:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:16 Get A/D filter: -9.255963e+061 result=40 14:39:16 Get A/D value=-858993460 result=40 14:39:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:39:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:39:16 Aux= 14:39:16 Message to Camera, serial 127064 queued 14:39:53 Received message from Master: op=PointingHead serial=127077 14:39:53 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:39:53 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:39:53 Point started: ret=0 14:39:53 point_skyscan result=0 14:39:54 Check angles 14:39:54 SkyScan query 14:39:55 SkyScan query done: ret=0 az=135.72<-9048 ze=-6.51<-12434 Statuses=0009 0008 14:39:55 Msec=0 True Az=135.72 Ze=-6.51 Az status=0009 Ze status=0008 14:39:55 Check angles 14:39:55 SkyScan query 14:39:56 SkyScan query done: ret=0 az=153.24<-10216 ze=-6.495<-12433 Statuses=0009 0008 14:39:56 Msec=750 True Az=153.24 Ze=-6.495 Az status=0009 Ze status=0008 14:39:56 Check angles 14:39:56 SkyScan query 14:39:56 SkyScan query done: ret=0 az=170.67<-11378 ze=-6.495<-12433 Statuses=0009 0008 14:39:56 Msec=1500 True Az=170.67 Ze=-6.495 Az status=0009 Ze status=0008 14:39:56 Check angles 14:39:56 SkyScan query 14:39:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:39:57 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:39:57 Message to Master queued w/err=0: serial=127077 error=0 14:40:02 Received message from Master: op=Filter serial=127078 14:40:02 Color wheel filter change from 0 to 0 14:40:02 FLIGetFilterPos err=0 currentPosition=0 14:40:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:40:02 Filter is already there-color wheel unchanged 14:40:02 Received message from Master: op=Shutter serial=127079 14:40:02 Shutter LASER close 14:40:02 Received message from Camera: op=State serial=127081 14:40:02 GetSingleValue result=40 Value=cccccccc 14:40:02 SkyScan query 14:40:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:40:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:03 Parameters OK 14:40:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:03 Set A/D data flow result=40 14:40:03 Set A/D channel type result=40 14:40:03 Set A/D encoding result=40 14:40:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:03 Set channel filter=0.000000e+000 result=40 14:40:03 Config A/D Result=40 14:40:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:03 Get A/D filter: -9.255963e+061 result=40 14:40:03 Get A/D value=-858993460 result=40 14:40:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:03 Parameters OK 14:40:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:03 Set A/D data flow result=40 14:40:03 Set A/D channel type result=40 14:40:03 Set A/D encoding result=40 14:40:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:03 Set channel filter=0.000000e+000 result=40 14:40:03 Config A/D Result=40 14:40:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:03 Get A/D filter: -9.255963e+061 result=40 14:40:03 Get A/D value=-858993460 result=40 14:40:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:40:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:40:03 Aux= 14:40:03 Message to Camera, serial 127081 queued 14:40:40 Received message from Master: op=PointingHead serial=127094 14:40:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:40:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:40:40 Point started: ret=0 14:40:40 point_skyscan result=0 14:40:41 Check angles 14:40:41 SkyScan query 14:40:41 SkyScan query done: ret=0 az=152.895<-10193 ze=6.51<-11566 Statuses=0009 0008 14:40:41 Msec=0 True Az=152.895 Ze=6.51 Az status=0009 Ze status=0008 14:40:42 Check angles 14:40:42 SkyScan query 14:40:42 SkyScan query done: ret=0 az=135.18<-9012 ze=6.495<-11567 Statuses=0009 0008 14:40:42 Msec=750 True Az=135.18 Ze=6.495 Az status=0009 Ze status=0008 14:40:42 Check angles 14:40:42 SkyScan query 14:40:43 SkyScan query done: ret=0 az=117.705<-7847 ze=6.495<-11567 Statuses=0009 0008 14:40:43 Msec=1500 True Az=117.705 Ze=6.495 Az status=0009 Ze status=0008 14:40:43 Check angles 14:40:43 SkyScan query 14:40:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:40:44 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:40:44 Message to Master queued w/err=0: serial=127094 error=0 14:40:49 Received message from Master: op=Filter serial=127095 14:40:49 Color wheel filter change from 0 to 0 14:40:49 FLIGetFilterPos err=0 currentPosition=0 14:40:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:40:49 Filter is already there-color wheel unchanged 14:40:49 Received message from Master: op=Shutter serial=127096 14:40:49 Shutter LASER close 14:40:49 Received message from Camera: op=State serial=127098 14:40:49 GetSingleValue result=40 Value=cccccccc 14:40:49 SkyScan query 14:40:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:40:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:49 Parameters OK 14:40:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:49 Set A/D data flow result=40 14:40:49 Set A/D channel type result=40 14:40:49 Set A/D encoding result=40 14:40:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:49 Set channel filter=0.000000e+000 result=40 14:40:49 Config A/D Result=40 14:40:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:49 Get A/D filter: -9.255963e+061 result=40 14:40:49 Get A/D value=-858993460 result=40 14:40:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:49 Parameters OK 14:40:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:49 Set A/D data flow result=40 14:40:49 Set A/D channel type result=40 14:40:49 Set A/D encoding result=40 14:40:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:49 Set channel filter=0.000000e+000 result=40 14:40:49 Config A/D Result=40 14:40:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:49 Get A/D filter: -9.255963e+061 result=40 14:40:49 Get A/D value=-858993460 result=40 14:40:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:40:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:40:49 Aux= 14:40:49 Message to Camera, serial 127098 queued 14:41:26 Received message from Master: op=PointingHead serial=127111 14:41:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:41:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:41:27 Point started: ret=0 14:41:27 point_skyscan result=0 14:41:27 Check angles 14:41:27 SkyScan query 14:41:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 14:41:28 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 14:41:28 Check angles 14:41:28 SkyScan query 14:41:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.09<-15006 Statuses=0008 0009 14:41:29 Msec=750 True Az=112.995 Ze=-45.09 Az status=0008 Ze status=0009 14:41:29 Check angles 14:41:29 SkyScan query 14:41:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.075<-16405 Statuses=0008 0009 14:41:29 Msec=1500 True Az=112.995 Ze=-66.075 Az status=0008 Ze status=0009 14:41:30 Check angles 14:41:30 SkyScan query 14:41:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.045<-17803 Statuses=0008 0009 14:41:30 Msec=2250 True Az=112.995 Ze=-87.045 Az status=0008 Ze status=0009 14:41:30 Check angles 14:41:30 SkyScan query 14:41:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.03<-19202 Statuses=0008 0009 14:41:31 Msec=3000 True Az=112.995 Ze=-108.03 Az status=0008 Ze status=0009 14:41:31 Check angles 14:41:31 SkyScan query 14:41:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.94<-20596 Statuses=0008 0009 14:41:32 Msec=3750 True Az=112.995 Ze=-128.94 Az status=0008 Ze status=0009 14:41:32 Check angles 14:41:32 SkyScan query 14:41:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.3<-22020 Statuses=0008 0009 14:41:32 Msec=4500 True Az=112.995 Ze=-150.3 Az status=0008 Ze status=0009 14:41:33 Check angles 14:41:33 SkyScan query 14:41:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.09<-23406 Statuses=0008 0009 14:41:33 Msec=5250 True Az=112.995 Ze=-171.09 Az status=0008 Ze status=0009 14:41:33 Check angles 14:41:33 SkyScan query 14:41:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:41:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:41:34 Message to Master queued w/err=0: serial=127111 error=0 14:41:39 Received message from Master: op=Filter serial=127112 14:41:39 Color wheel filter change from 0 to 0 14:41:39 FLIGetFilterPos err=0 currentPosition=0 14:41:39 FLIGetStepsRemaining err=0 RemainingSteps=0 14:41:39 Filter is already there-color wheel unchanged 14:41:39 Received message from Master: op=Shutter serial=127113 14:41:39 Shutter LASER open 14:41:39 Received message from Camera: op=State serial=127115 14:41:39 GetSingleValue result=40 Value=cccccccc 14:41:39 SkyScan query 14:41:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:41:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:40 Parameters OK 14:41:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:40 Set A/D data flow result=40 14:41:40 Set A/D channel type result=40 14:41:40 Set A/D encoding result=40 14:41:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:40 Set channel filter=0.000000e+000 result=40 14:41:40 Config A/D Result=40 14:41:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:40 Get A/D filter: -9.255963e+061 result=40 14:41:40 Get A/D value=-858993460 result=40 14:41:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:40 Parameters OK 14:41:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:40 Set A/D data flow result=40 14:41:40 Set A/D channel type result=40 14:41:40 Set A/D encoding result=40 14:41:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:40 Set channel filter=0.000000e+000 result=40 14:41:40 Config A/D Result=40 14:41:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:40 Get A/D filter: -9.255963e+061 result=40 14:41:40 Get A/D value=-858993460 result=40 14:41:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:41:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:41:40 Aux= 14:41:40 Message to Camera, serial 127115 queued 14:41:47 Received message from Master: op=Shutter serial=127124 14:41:47 Shutter LASER close 14:41:48 Received message from Master: op=PointingHead serial=127128 14:41:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:41:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:41:48 Point started: ret=0 14:41:48 point_skyscan result=0 14:41:49 Check angles 14:41:49 SkyScan query 14:41:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 14:41:49 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 14:41:50 Check angles 14:41:50 SkyScan query 14:41:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.34<-20156 Statuses=0008 0009 14:41:50 Msec=750 True Az=112.995 Ze=-122.34 Az status=0008 Ze status=0009 14:41:50 Check angles 14:41:50 SkyScan query 14:41:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.385<-18759 Statuses=0008 0009 14:41:51 Msec=1500 True Az=112.995 Ze=-101.385 Az status=0008 Ze status=0009 14:41:51 Check angles 14:41:51 SkyScan query 14:41:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.415<-17361 Statuses=0008 0009 14:41:52 Msec=2250 True Az=112.995 Ze=-80.415 Az status=0008 Ze status=0009 14:41:52 Check angles 14:41:52 SkyScan query 14:41:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.505<-15967 Statuses=0008 0009 14:41:52 Msec=3000 True Az=112.995 Ze=-59.505 Az status=0008 Ze status=0009 14:41:53 Check angles 14:41:53 SkyScan query 14:41:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.52<-14568 Statuses=0008 0009 14:41:53 Msec=3750 True Az=112.995 Ze=-38.52 Az status=0008 Ze status=0009 14:41:53 Check angles 14:41:53 SkyScan query 14:41:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.535<-13169 Statuses=0008 0009 14:41:54 Msec=4500 True Az=112.995 Ze=-17.535 Az status=0008 Ze status=0009 14:41:54 Check angles 14:41:54 SkyScan query 14:41:55 SkyScan query done: ret=0 az=112.98<-7532 ze=3.435<-11771 Statuses=0008 0009 14:41:55 Msec=5250 True Az=112.98 Ze=3.435 Az status=0008 Ze status=0009 14:41:55 Check angles 14:41:55 SkyScan query 14:41:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:41:55 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:41:55 Message to Master queued w/err=0: serial=127128 error=0 14:42:00 Received message from Master: op=Filter serial=127129 14:42:00 Color wheel filter change from 0 to 0 14:42:00 FLIGetFilterPos err=0 currentPosition=0 14:42:00 FLIGetStepsRemaining err=0 RemainingSteps=0 14:42:00 Filter is already there-color wheel unchanged 14:42:01 Received message from Master: op=Shutter serial=127130 14:42:01 Shutter LASER close 14:42:01 Received message from Camera: op=State serial=127132 14:42:01 GetSingleValue result=40 Value=cccccccc 14:42:01 SkyScan query 14:42:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:42:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:01 Parameters OK 14:42:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:01 Set A/D data flow result=40 14:42:01 Set A/D channel type result=40 14:42:01 Set A/D encoding result=40 14:42:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:01 Set channel filter=0.000000e+000 result=40 14:42:01 Config A/D Result=40 14:42:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:01 Get A/D filter: -9.255963e+061 result=40 14:42:01 Get A/D value=-858993460 result=40 14:42:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:01 Parameters OK 14:42:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:01 Set A/D data flow result=40 14:42:01 Set A/D channel type result=40 14:42:01 Set A/D encoding result=40 14:42:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:01 Set channel filter=0.000000e+000 result=40 14:42:01 Config A/D Result=40 14:42:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:01 Get A/D filter: -9.255963e+061 result=40 14:42:01 Get A/D value=-858993460 result=40 14:42:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:42:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:42:01 Aux= 14:42:01 Message to Camera, serial 127132 queued 14:42:38 Received message from Master: op=PointingHead serial=127145 14:42:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:42:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:42:39 Point started: ret=0 14:42:39 point_skyscan result=0 14:42:39 Check angles 14:42:39 SkyScan query 14:42:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:42:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:42:40 Message to Master queued w/err=0: serial=127145 error=0 14:42:45 Received message from Master: op=Filter serial=127146 14:42:45 Color wheel filter change from 0 to 0 14:42:45 FLIGetFilterPos err=0 currentPosition=0 14:42:45 FLIGetStepsRemaining err=0 RemainingSteps=0 14:42:45 Filter is already there-color wheel unchanged 14:42:45 Received message from Master: op=Shutter serial=127147 14:42:45 Shutter LASER close 14:42:45 Received message from Camera: op=State serial=127149 14:42:45 GetSingleValue result=40 Value=cccccccc 14:42:45 SkyScan query 14:42:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:42:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:46 Parameters OK 14:42:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:46 Set A/D data flow result=40 14:42:46 Set A/D channel type result=40 14:42:46 Set A/D encoding result=40 14:42:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:46 Set channel filter=0.000000e+000 result=40 14:42:46 Config A/D Result=40 14:42:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:46 Get A/D filter: -9.255963e+061 result=40 14:42:46 Get A/D value=-858993460 result=40 14:42:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:46 Parameters OK 14:42:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:46 Set A/D data flow result=40 14:42:46 Set A/D channel type result=40 14:42:46 Set A/D encoding result=40 14:42:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:46 Set channel filter=0.000000e+000 result=40 14:42:46 Config A/D Result=40 14:42:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:46 Get A/D filter: -9.255963e+061 result=40 14:42:46 Get A/D value=-858993460 result=40 14:42:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:42:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:42:46 Aux= 14:42:46 Message to Camera, serial 127149 queued 14:43:22 Received message from Master: op=PointingHead serial=127162 14:43:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:43:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:43:23 Point started: ret=0 14:43:23 point_skyscan result=0 14:43:24 Check angles 14:43:24 SkyScan query 14:43:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:43:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:43:24 Message to Master queued w/err=0: serial=127162 error=0 14:43:29 Received message from Master: op=Filter serial=127163 14:43:29 Color wheel filter change from 0 to 0 14:43:29 FLIGetFilterPos err=0 currentPosition=0 14:43:29 FLIGetStepsRemaining err=0 RemainingSteps=0 14:43:29 Filter is already there-color wheel unchanged 14:43:29 Received message from Master: op=Shutter serial=127164 14:43:29 Shutter LASER close 14:43:29 Received message from Camera: op=State serial=127166 14:43:29 GetSingleValue result=40 Value=cccccccc 14:43:29 SkyScan query 14:43:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:43:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:30 Parameters OK 14:43:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:30 Set A/D data flow result=40 14:43:30 Set A/D channel type result=40 14:43:30 Set A/D encoding result=40 14:43:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:30 Set channel filter=0.000000e+000 result=40 14:43:30 Config A/D Result=40 14:43:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:30 Get A/D filter: -9.255963e+061 result=40 14:43:30 Get A/D value=-858993460 result=40 14:43:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:30 Parameters OK 14:43:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:30 Set A/D data flow result=40 14:43:30 Set A/D channel type result=40 14:43:30 Set A/D encoding result=40 14:43:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:30 Set channel filter=0.000000e+000 result=40 14:43:30 Config A/D Result=40 14:43:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:30 Get A/D filter: -9.255963e+061 result=40 14:43:30 Get A/D value=-858993460 result=40 14:43:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:43:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:43:30 Aux= 14:43:30 Message to Camera, serial 127166 queued [UTC 2019-3-5 14:43:50] 14:44:07 Received message from Master: op=PointingHead serial=127179 14:44:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:44:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:44:07 Point started: ret=0 14:44:07 point_skyscan result=0 14:44:08 Check angles 14:44:08 SkyScan query 14:44:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:44:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:44:08 Message to Master queued w/err=0: serial=127179 error=0 14:44:13 Received message from Master: op=Filter serial=127180 14:44:13 Color wheel filter change from 0 to 0 14:44:13 FLIGetFilterPos err=0 currentPosition=0 14:44:13 FLIGetStepsRemaining err=0 RemainingSteps=0 14:44:13 Filter is already there-color wheel unchanged 14:44:14 Received message from Master: op=Shutter serial=127181 14:44:14 Shutter LASER close 14:44:14 Received message from Camera: op=State serial=127183 14:44:14 GetSingleValue result=40 Value=cccccccc 14:44:14 SkyScan query 14:44:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:44:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:14 Parameters OK 14:44:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:14 Set A/D data flow result=40 14:44:14 Set A/D channel type result=40 14:44:14 Set A/D encoding result=40 14:44:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:14 Set channel filter=0.000000e+000 result=40 14:44:14 Config A/D Result=40 14:44:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:14 Get A/D filter: -9.255963e+061 result=40 14:44:14 Get A/D value=-858993460 result=40 14:44:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:14 Parameters OK 14:44:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:14 Set A/D data flow result=40 14:44:14 Set A/D channel type result=40 14:44:14 Set A/D encoding result=40 14:44:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:14 Set channel filter=0.000000e+000 result=40 14:44:14 Config A/D Result=40 14:44:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:14 Get A/D filter: -9.255963e+061 result=40 14:44:14 Get A/D value=-858993460 result=40 14:44:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:44:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:44:14 Aux= 14:44:14 Message to Camera, serial 127183 queued 14:44:51 Received message from Master: op=PointingHead serial=127196 14:44:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:44:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:44:51 Point started: ret=0 14:44:51 point_skyscan result=0 14:44:52 Check angles 14:44:52 SkyScan query 14:44:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 14:44:53 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 14:44:53 Check angles 14:44:53 SkyScan query 14:44:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.46<-14964 Statuses=0008 0009 14:44:54 Msec=750 True Az=112.995 Ze=-44.46 Az status=0008 Ze status=0009 14:44:54 Check angles 14:44:54 SkyScan query 14:44:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.415<-16361 Statuses=0008 0009 14:44:54 Msec=1500 True Az=112.995 Ze=-65.415 Az status=0008 Ze status=0009 14:44:54 Check angles 14:44:54 SkyScan query 14:44:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 14:44:55 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 14:44:55 Check angles 14:44:55 SkyScan query 14:44:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.325<-19155 Statuses=0008 0009 14:44:56 Msec=3000 True Az=112.995 Ze=-107.325 Az status=0008 Ze status=0009 14:44:56 Check angles 14:44:56 SkyScan query 14:44:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.295<-20553 Statuses=0008 0009 14:44:57 Msec=3750 True Az=112.995 Ze=-128.295 Az status=0008 Ze status=0009 14:44:57 Check angles 14:44:57 SkyScan query 14:44:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.28<-21952 Statuses=0008 0009 14:44:57 Msec=4500 True Az=112.995 Ze=-149.28 Az status=0008 Ze status=0009 14:44:57 Check angles 14:44:57 SkyScan query 14:44:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.22<-23348 Statuses=0008 0009 14:44:58 Msec=5250 True Az=112.995 Ze=-170.22 Az status=0008 Ze status=0009 14:44:58 Check angles 14:44:58 SkyScan query 14:44:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:44:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:44:59 Message to Master queued w/err=0: serial=127196 error=0 14:45:04 Received message from Master: op=Filter serial=127197 14:45:04 Color wheel filter change from 0 to 0 14:45:04 FLIGetFilterPos err=0 currentPosition=0 14:45:04 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:04 Filter is already there-color wheel unchanged 14:45:04 Received message from Master: op=Shutter serial=127198 14:45:04 Shutter LASER open 14:45:04 Received message from Camera: op=State serial=127200 14:45:04 GetSingleValue result=40 Value=cccccccc 14:45:04 SkyScan query 14:45:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:45:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:05 Parameters OK 14:45:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:05 Set A/D data flow result=40 14:45:05 Set A/D channel type result=40 14:45:05 Set A/D encoding result=40 14:45:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:05 Set channel filter=0.000000e+000 result=40 14:45:05 Config A/D Result=40 14:45:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:05 Get A/D filter: -9.255963e+061 result=40 14:45:05 Get A/D value=-858993460 result=40 14:45:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:05 Parameters OK 14:45:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:05 Set A/D data flow result=40 14:45:05 Set A/D channel type result=40 14:45:05 Set A/D encoding result=40 14:45:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:05 Set channel filter=0.000000e+000 result=40 14:45:05 Config A/D Result=40 14:45:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:05 Get A/D filter: -9.255963e+061 result=40 14:45:05 Get A/D value=-858993460 result=40 14:45:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:05 Aux= 14:45:05 Message to Camera, serial 127200 queued 14:45:13 Received message from Master: op=Shutter serial=127210 14:45:13 Shutter LASER close 14:45:14 Received message from Master: op=PointingHead serial=127214 14:45:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:45:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:45:14 Point started: ret=0 14:45:14 point_skyscan result=0 14:45:15 Check angles 14:45:15 SkyScan query 14:45:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 14:45:15 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 14:45:16 Check angles 14:45:16 SkyScan query 14:45:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.505<-20167 Statuses=0008 0009 14:45:16 Msec=750 True Az=112.995 Ze=-122.505 Az status=0008 Ze status=0009 14:45:16 Check angles 14:45:16 SkyScan query 14:45:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.46<-18764 Statuses=0008 0009 14:45:17 Msec=1500 True Az=112.995 Ze=-101.46 Az status=0008 Ze status=0009 14:45:17 Check angles 14:45:17 SkyScan query 14:45:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.58<-17372 Statuses=0008 0009 14:45:18 Msec=2250 True Az=112.995 Ze=-80.58 Az status=0008 Ze status=0009 14:45:18 Check angles 14:45:18 SkyScan query 14:45:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.64<-15976 Statuses=0008 0009 14:45:18 Msec=3000 True Az=112.995 Ze=-59.64 Az status=0008 Ze status=0009 14:45:19 Check angles 14:45:19 SkyScan query 14:45:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.67<-14578 Statuses=0008 0009 14:45:19 Msec=3750 True Az=112.995 Ze=-38.67 Az status=0008 Ze status=0009 14:45:19 Check angles 14:45:19 SkyScan query 14:45:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.73<-13182 Statuses=0008 0009 14:45:20 Msec=4500 True Az=112.995 Ze=-17.73 Az status=0008 Ze status=0009 14:45:20 Check angles 14:45:20 SkyScan query 14:45:21 SkyScan query done: ret=0 az=112.98<-7532 ze=3.255<-11783 Statuses=0008 0009 14:45:21 Msec=5250 True Az=112.98 Ze=3.255 Az status=0008 Ze status=0009 14:45:21 Check angles 14:45:21 SkyScan query 14:45:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:45:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:45:21 Message to Master queued w/err=0: serial=127214 error=0 14:45:26 Received message from Master: op=Filter serial=127215 14:45:26 Color wheel filter change from 0 to 0 14:45:26 FLIGetFilterPos err=0 currentPosition=0 14:45:26 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:26 Filter is already there-color wheel unchanged 14:45:27 Received message from Master: op=Shutter serial=127216 14:45:27 Shutter LASER close 14:45:27 Received message from Camera: op=State serial=127218 14:45:27 GetSingleValue result=40 Value=cccccccc 14:45:27 SkyScan query 14:45:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:45:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:27 Parameters OK 14:45:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:27 Set A/D data flow result=40 14:45:27 Set A/D channel type result=40 14:45:27 Set A/D encoding result=40 14:45:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:27 Set channel filter=0.000000e+000 result=40 14:45:27 Config A/D Result=40 14:45:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:27 Get A/D filter: -9.255963e+061 result=40 14:45:27 Get A/D value=-858993460 result=40 14:45:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:27 Parameters OK 14:45:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:27 Set A/D data flow result=40 14:45:27 Set A/D channel type result=40 14:45:27 Set A/D encoding result=40 14:45:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:27 Set channel filter=0.000000e+000 result=40 14:45:27 Config A/D Result=40 14:45:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:27 Get A/D filter: -9.255963e+061 result=40 14:45:27 Get A/D value=-858993460 result=40 14:45:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:27 Aux= 14:45:27 Message to Camera, serial 127218 queued 14:46:04 Received message from Master: op=PointingHead serial=127231 14:46:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:46:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:46:05 Point started: ret=0 14:46:05 point_skyscan result=0 14:46:05 Check angles 14:46:05 SkyScan query 14:46:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:46:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:46:06 Message to Master queued w/err=0: serial=127231 error=0 14:46:11 Received message from Master: op=Filter serial=127232 14:46:11 Color wheel filter change from 0 to 0 14:46:11 FLIGetFilterPos err=0 currentPosition=0 14:46:11 FLIGetStepsRemaining err=0 RemainingSteps=0 14:46:11 Filter is already there-color wheel unchanged 14:46:11 Received message from Master: op=Shutter serial=127233 14:46:11 Shutter LASER close 14:46:11 Received message from Camera: op=State serial=127235 14:46:11 GetSingleValue result=40 Value=cccccccc 14:46:11 SkyScan query 14:46:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:46:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:12 Parameters OK 14:46:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:12 Set A/D data flow result=40 14:46:12 Set A/D channel type result=40 14:46:12 Set A/D encoding result=40 14:46:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:12 Set channel filter=0.000000e+000 result=40 14:46:12 Config A/D Result=40 14:46:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:12 Get A/D filter: -9.255963e+061 result=40 14:46:12 Get A/D value=-858993460 result=40 14:46:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:12 Parameters OK 14:46:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:12 Set A/D data flow result=40 14:46:12 Set A/D channel type result=40 14:46:12 Set A/D encoding result=40 14:46:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:12 Set channel filter=0.000000e+000 result=40 14:46:12 Config A/D Result=40 14:46:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:12 Get A/D filter: -9.255963e+061 result=40 14:46:12 Get A/D value=-858993460 result=40 14:46:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:46:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:46:12 Aux= 14:46:12 Message to Camera, serial 127235 queued 14:46:48 Received message from Master: op=PointingHead serial=127248 14:46:48 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:46:48 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:46:49 Point started: ret=0 14:46:49 point_skyscan result=0 14:46:50 Check angles 14:46:50 SkyScan query 14:46:50 SkyScan query done: ret=0 az=135.84<-9056 ze=-6.51<-12434 Statuses=0009 0008 14:46:50 Msec=0 True Az=135.84 Ze=-6.51 Az status=0009 Ze status=0008 14:46:50 Check angles 14:46:50 SkyScan query 14:46:51 SkyScan query done: ret=0 az=153.24<-10216 ze=-6.51<-12434 Statuses=0009 0008 14:46:51 Msec=750 True Az=153.24 Ze=-6.51 Az status=0009 Ze status=0008 14:46:51 Check angles 14:46:51 SkyScan query 14:46:52 SkyScan query done: ret=0 az=170.79<-11386 ze=-6.495<-12433 Statuses=0009 0008 14:46:52 Msec=1500 True Az=170.79 Ze=-6.495 Az status=0009 Ze status=0008 14:46:52 Check angles 14:46:52 SkyScan query 14:46:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:46:52 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:46:52 Message to Master queued w/err=0: serial=127248 error=0 14:46:57 Received message from Master: op=Filter serial=127249 14:46:57 Color wheel filter change from 0 to 0 14:46:57 FLIGetFilterPos err=0 currentPosition=0 14:46:57 FLIGetStepsRemaining err=0 RemainingSteps=0 14:46:57 Filter is already there-color wheel unchanged 14:46:58 Received message from Master: op=Shutter serial=127250 14:46:58 Shutter LASER close 14:46:58 Received message from Camera: op=State serial=127252 14:46:58 GetSingleValue result=40 Value=cccccccc 14:46:58 SkyScan query 14:46:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:46:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:58 Parameters OK 14:46:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:58 Set A/D data flow result=40 14:46:58 Set A/D channel type result=40 14:46:58 Set A/D encoding result=40 14:46:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:58 Set channel filter=0.000000e+000 result=40 14:46:58 Config A/D Result=40 14:46:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:58 Get A/D filter: -9.255963e+061 result=40 14:46:58 Get A/D value=-858993460 result=40 14:46:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:58 Parameters OK 14:46:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:58 Set A/D data flow result=40 14:46:58 Set A/D channel type result=40 14:46:58 Set A/D encoding result=40 14:46:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:58 Set channel filter=0.000000e+000 result=40 14:46:58 Config A/D Result=40 14:46:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:58 Get A/D filter: -9.255963e+061 result=40 14:46:58 Get A/D value=-858993460 result=40 14:46:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:46:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:46:58 Aux= 14:46:58 Message to Camera, serial 127252 queued 14:47:35 Received message from Master: op=PointingHead serial=127265 14:47:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:47:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:47:35 Point started: ret=0 14:47:35 point_skyscan result=0 14:47:36 Check angles 14:47:36 SkyScan query 14:47:37 SkyScan query done: ret=0 az=152.595<-10173 ze=6.51<-11566 Statuses=0009 0008 14:47:37 Msec=0 True Az=152.595 Ze=6.51 Az status=0009 Ze status=0008 14:47:37 Check angles 14:47:37 SkyScan query 14:47:37 SkyScan query done: ret=0 az=134.67<-8978 ze=6.495<-11567 Statuses=0009 0008 14:47:37 Msec=750 True Az=134.67 Ze=6.495 Az status=0009 Ze status=0008 14:47:38 Check angles 14:47:38 SkyScan query 14:47:38 SkyScan query done: ret=0 az=117.255<-7817 ze=6.495<-11567 Statuses=0009 0008 14:47:38 Msec=1500 True Az=117.255 Ze=6.495 Az status=0009 Ze status=0008 14:47:38 Check angles 14:47:38 SkyScan query 14:47:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:47:39 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:47:39 Message to Master queued w/err=0: serial=127265 error=0 14:47:44 Received message from Master: op=Filter serial=127266 14:47:44 Color wheel filter change from 0 to 0 14:47:44 FLIGetFilterPos err=0 currentPosition=0 14:47:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:47:44 Filter is already there-color wheel unchanged 14:47:44 Received message from Master: op=Shutter serial=127267 14:47:44 Shutter LASER close 14:47:44 Received message from Camera: op=State serial=127269 14:47:44 GetSingleValue result=40 Value=cccccccc 14:47:44 SkyScan query 14:47:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:47:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:45 Parameters OK 14:47:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:45 Set A/D data flow result=40 14:47:45 Set A/D channel type result=40 14:47:45 Set A/D encoding result=40 14:47:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:45 Set channel filter=0.000000e+000 result=40 14:47:45 Config A/D Result=40 14:47:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:45 Get A/D filter: -9.255963e+061 result=40 14:47:45 Get A/D value=-858993460 result=40 14:47:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:45 Parameters OK 14:47:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:45 Set A/D data flow result=40 14:47:45 Set A/D channel type result=40 14:47:45 Set A/D encoding result=40 14:47:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:45 Set channel filter=0.000000e+000 result=40 14:47:45 Config A/D Result=40 14:47:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:45 Get A/D filter: -9.255963e+061 result=40 14:47:45 Get A/D value=-858993460 result=40 14:47:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:47:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:47:45 Aux= 14:47:45 Message to Camera, serial 127269 queued 14:48:22 Received message from Master: op=PointingHead serial=127282 14:48:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:48:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:48:22 Point started: ret=0 14:48:22 point_skyscan result=0 14:48:23 Check angles 14:48:23 SkyScan query 14:48:23 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.4<-13560 Statuses=0008 0009 14:48:23 Msec=0 True Az=112.98 Ze=-23.4 Az status=0008 Ze status=0009 14:48:23 Check angles 14:48:23 SkyScan query 14:48:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.73<-14982 Statuses=0008 0009 14:48:24 Msec=750 True Az=112.995 Ze=-44.73 Az status=0008 Ze status=0009 14:48:24 Check angles 14:48:24 SkyScan query 14:48:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 14:48:25 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 14:48:25 Check angles 14:48:25 SkyScan query 14:48:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.67<-17778 Statuses=0008 0009 14:48:26 Msec=2250 True Az=112.995 Ze=-86.67 Az status=0008 Ze status=0009 14:48:26 Check angles 14:48:26 SkyScan query 14:48:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.67<-19178 Statuses=0008 0009 14:48:26 Msec=3000 True Az=112.995 Ze=-107.67 Az status=0008 Ze status=0009 14:48:26 Check angles 14:48:26 SkyScan query 14:48:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.595<-20573 Statuses=0008 0009 14:48:27 Msec=3750 True Az=112.995 Ze=-128.595 Az status=0008 Ze status=0009 14:48:27 Check angles 14:48:27 SkyScan query 14:48:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.61<-21974 Statuses=0008 0009 14:48:28 Msec=4500 True Az=112.995 Ze=-149.61 Az status=0008 Ze status=0009 14:48:28 Check angles 14:48:28 SkyScan query 14:48:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.52<-23368 Statuses=0008 0009 14:48:29 Msec=5250 True Az=112.995 Ze=-170.52 Az status=0008 Ze status=0009 14:48:29 Check angles 14:48:29 SkyScan query 14:48:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:48:29 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:48:29 Message to Master queued w/err=0: serial=127282 error=0 14:48:34 Received message from Master: op=Filter serial=127283 14:48:34 Color wheel filter change from 0 to 0 14:48:34 FLIGetFilterPos err=0 currentPosition=0 14:48:34 FLIGetStepsRemaining err=0 RemainingSteps=0 14:48:34 Filter is already there-color wheel unchanged 14:48:34 Received message from Master: op=Shutter serial=127284 14:48:34 Shutter LASER open 14:48:35 Received message from Camera: op=State serial=127286 14:48:35 GetSingleValue result=40 Value=cccccccc 14:48:35 SkyScan query 14:48:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:48:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:35 Parameters OK 14:48:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:35 Set A/D data flow result=40 14:48:35 Set A/D channel type result=40 14:48:35 Set A/D encoding result=40 14:48:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:35 Set channel filter=0.000000e+000 result=40 14:48:35 Config A/D Result=40 14:48:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:35 Get A/D filter: -9.255963e+061 result=40 14:48:35 Get A/D value=-858993460 result=40 14:48:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:35 Parameters OK 14:48:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:35 Set A/D data flow result=40 14:48:35 Set A/D channel type result=40 14:48:35 Set A/D encoding result=40 14:48:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:35 Set channel filter=0.000000e+000 result=40 14:48:35 Config A/D Result=40 14:48:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:35 Get A/D filter: -9.255963e+061 result=40 14:48:35 Get A/D value=-858993460 result=40 14:48:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:48:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:48:35 Aux= 14:48:35 Message to Camera, serial 127286 queued 14:48:44 Received message from Master: op=Shutter serial=127296 14:48:44 Shutter LASER close 14:48:44 Received message from Master: op=PointingHead serial=127300 14:48:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:48:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:48:44 Point started: ret=0 14:48:44 point_skyscan result=0 14:48:45 Check angles 14:48:45 SkyScan query 14:48:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.31<-21554 Statuses=0008 0009 14:48:46 Msec=0 True Az=112.995 Ze=-143.31 Az status=0008 Ze status=0009 14:48:46 Check angles 14:48:46 SkyScan query 14:48:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 14:48:46 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 14:48:47 Check angles 14:48:47 SkyScan query 14:48:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.98<-18732 Statuses=0008 0009 14:48:47 Msec=1500 True Az=112.995 Ze=-100.98 Az status=0008 Ze status=0009 14:48:47 Check angles 14:48:47 SkyScan query 14:48:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.515<-17301 Statuses=0008 0009 14:48:48 Msec=2250 True Az=112.995 Ze=-79.515 Az status=0008 Ze status=0009 14:48:48 Check angles 14:48:48 SkyScan query 14:48:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.575<-15905 Statuses=0008 0009 14:48:49 Msec=3000 True Az=112.995 Ze=-58.575 Az status=0008 Ze status=0009 14:48:49 Check angles 14:48:49 SkyScan query 14:48:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.245<-14483 Statuses=0008 0009 14:48:50 Msec=3750 True Az=112.995 Ze=-37.245 Az status=0008 Ze status=0009 14:48:50 Check angles 14:48:50 SkyScan query 14:48:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.87<-13058 Statuses=0008 0009 14:48:50 Msec=4500 True Az=112.995 Ze=-15.87 Az status=0008 Ze status=0009 14:48:50 Check angles 14:48:50 SkyScan query 14:48:51 SkyScan query done: ret=0 az=112.995<-7533 ze=4.875<-11675 Statuses=0008 0009 14:48:51 Msec=5250 True Az=112.995 Ze=4.875 Az status=0008 Ze status=0009 14:48:51 Check angles 14:48:51 SkyScan query 14:48:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:48:52 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:48:52 Message to Master queued w/err=0: serial=127300 error=0 14:48:57 Received message from Master: op=Filter serial=127301 14:48:57 Color wheel filter change from 0 to 0 14:48:57 FLIGetFilterPos err=0 currentPosition=0 14:48:57 FLIGetStepsRemaining err=0 RemainingSteps=0 14:48:57 Filter is already there-color wheel unchanged 14:48:57 Received message from Master: op=Shutter serial=127302 14:48:57 Shutter LASER close 14:48:57 Received message from Camera: op=State serial=127304 14:48:57 GetSingleValue result=40 Value=cccccccc 14:48:57 SkyScan query 14:48:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:48:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:58 Parameters OK 14:48:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:58 Set A/D data flow result=40 14:48:58 Set A/D channel type result=40 14:48:58 Set A/D encoding result=40 14:48:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:58 Set channel filter=0.000000e+000 result=40 14:48:58 Config A/D Result=40 14:48:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:58 Get A/D filter: -9.255963e+061 result=40 14:48:58 Get A/D value=-858993460 result=40 14:48:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:58 Parameters OK 14:48:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:58 Set A/D data flow result=40 14:48:58 Set A/D channel type result=40 14:48:58 Set A/D encoding result=40 14:48:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:58 Set channel filter=0.000000e+000 result=40 14:48:58 Config A/D Result=40 14:48:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:58 Get A/D filter: -9.255963e+061 result=40 14:48:58 Get A/D value=-858993460 result=40 14:48:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:48:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:48:58 Aux= 14:48:58 Message to Camera, serial 127304 queued 14:49:34 Received message from Master: op=PointingHead serial=127316 14:49:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:49:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:49:34 Point started: ret=0 14:49:34 point_skyscan result=0 14:49:35 Check angles 14:49:35 SkyScan query 14:49:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:49:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:49:35 Message to Master queued w/err=0: serial=127316 error=0 14:49:40 Received message from Master: op=Filter serial=127317 14:49:40 Color wheel filter change from 0 to 0 14:49:40 FLIGetFilterPos err=0 currentPosition=0 14:49:40 FLIGetStepsRemaining err=0 RemainingSteps=0 14:49:40 Filter is already there-color wheel unchanged 14:49:40 Received message from Master: op=Shutter serial=127318 14:49:40 Shutter LASER close 14:49:41 Received message from Camera: op=State serial=127320 14:49:41 GetSingleValue result=40 Value=cccccccc 14:49:41 SkyScan query 14:49:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:49:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:41 Parameters OK 14:49:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:41 Set A/D data flow result=40 14:49:41 Set A/D channel type result=40 14:49:41 Set A/D encoding result=40 14:49:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:41 Set channel filter=0.000000e+000 result=40 14:49:41 Config A/D Result=40 14:49:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:41 Get A/D filter: -9.255963e+061 result=40 14:49:41 Get A/D value=-858993460 result=40 14:49:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:41 Parameters OK 14:49:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:41 Set A/D data flow result=40 14:49:41 Set A/D channel type result=40 14:49:41 Set A/D encoding result=40 14:49:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:41 Set channel filter=0.000000e+000 result=40 14:49:41 Config A/D Result=40 14:49:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:41 Get A/D filter: -9.255963e+061 result=40 14:49:41 Get A/D value=-858993460 result=40 14:49:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:49:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:49:41 Aux= 14:49:41 Message to Camera, serial 127320 queued 14:50:18 Received message from Master: op=PointingHead serial=127333 14:50:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:50:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:50:18 Point started: ret=0 14:50:18 point_skyscan result=0 14:50:19 Check angles 14:50:19 SkyScan query 14:50:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:50:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:50:20 Message to Master queued w/err=0: serial=127333 error=0 14:50:25 Received message from Master: op=Filter serial=127334 14:50:25 Color wheel filter change from 0 to 0 14:50:25 FLIGetFilterPos err=0 currentPosition=0 14:50:25 FLIGetStepsRemaining err=0 RemainingSteps=0 14:50:25 Filter is already there-color wheel unchanged 14:50:25 Received message from Master: op=Shutter serial=127335 14:50:25 Shutter LASER close 14:50:25 Received message from Camera: op=State serial=127337 14:50:25 GetSingleValue result=40 Value=cccccccc 14:50:25 SkyScan query 14:50:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:50:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:25 Parameters OK 14:50:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:25 Set A/D data flow result=40 14:50:25 Set A/D channel type result=40 14:50:25 Set A/D encoding result=40 14:50:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:25 Set channel filter=0.000000e+000 result=40 14:50:25 Config A/D Result=40 14:50:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:25 Get A/D filter: -9.255963e+061 result=40 14:50:25 Get A/D value=-858993460 result=40 14:50:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:25 Parameters OK 14:50:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:25 Set A/D data flow result=40 14:50:25 Set A/D channel type result=40 14:50:25 Set A/D encoding result=40 14:50:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:25 Set channel filter=0.000000e+000 result=40 14:50:25 Config A/D Result=40 14:50:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:25 Get A/D filter: -9.255963e+061 result=40 14:50:25 Get A/D value=-858993460 result=40 14:50:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:50:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:50:25 Aux= 14:50:25 Message to Camera, serial 127337 queued 14:51:02 Received message from Master: op=PointingHead serial=127350 14:51:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:51:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:51:03 Point started: ret=0 14:51:03 point_skyscan result=0 14:51:03 Check angles 14:51:03 SkyScan query 14:51:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:51:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:51:04 Message to Master queued w/err=0: serial=127350 error=0 14:51:09 Received message from Master: op=Filter serial=127351 14:51:09 Color wheel filter change from 0 to 0 14:51:09 FLIGetFilterPos err=0 currentPosition=0 14:51:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:51:09 Filter is already there-color wheel unchanged 14:51:09 Received message from Master: op=Shutter serial=127352 14:51:09 Shutter LASER close 14:51:09 Received message from Camera: op=State serial=127354 14:51:09 GetSingleValue result=40 Value=cccccccc 14:51:09 SkyScan query 14:51:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:51:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:10 Parameters OK 14:51:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:10 Set A/D data flow result=40 14:51:10 Set A/D channel type result=40 14:51:10 Set A/D encoding result=40 14:51:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:10 Set channel filter=0.000000e+000 result=40 14:51:10 Config A/D Result=40 14:51:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:10 Get A/D filter: -9.255963e+061 result=40 14:51:10 Get A/D value=-858993460 result=40 14:51:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:10 Parameters OK 14:51:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:10 Set A/D data flow result=40 14:51:10 Set A/D channel type result=40 14:51:10 Set A/D encoding result=40 14:51:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:10 Set channel filter=0.000000e+000 result=40 14:51:10 Config A/D Result=40 14:51:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:10 Get A/D filter: -9.255963e+061 result=40 14:51:10 Get A/D value=-858993460 result=40 14:51:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:51:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:51:10 Aux= 14:51:10 Message to Camera, serial 127354 queued 14:51:47 Received message from Master: op=PointingHead serial=127367 14:51:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:51:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:51:47 Point started: ret=0 14:51:47 point_skyscan result=0 14:51:48 Check angles 14:51:48 SkyScan query 14:51:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 14:51:48 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 14:51:48 Check angles 14:51:48 SkyScan query 14:51:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 14:51:49 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 14:51:49 Check angles 14:51:49 SkyScan query 14:51:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.61<-16374 Statuses=0008 0009 14:51:50 Msec=1500 True Az=112.995 Ze=-65.61 Az status=0008 Ze status=0009 14:51:50 Check angles 14:51:50 SkyScan query 14:51:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 14:51:50 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 14:51:51 Check angles 14:51:51 SkyScan query 14:51:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.06<-19204 Statuses=0008 0009 14:51:51 Msec=3000 True Az=112.995 Ze=-108.06 Az status=0008 Ze status=0009 14:51:51 Check angles 14:51:51 SkyScan query 14:51:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.985<-20599 Statuses=0008 0009 14:51:52 Msec=3750 True Az=112.995 Ze=-128.985 Az status=0008 Ze status=0009 14:51:52 Check angles 14:51:52 SkyScan query 14:51:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.91<-21994 Statuses=0008 0009 14:51:53 Msec=4500 True Az=112.995 Ze=-149.91 Az status=0008 Ze status=0009 14:51:53 Check angles 14:51:53 SkyScan query 14:51:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.09<-23406 Statuses=0008 0009 14:51:54 Msec=5250 True Az=112.995 Ze=-171.09 Az status=0008 Ze status=0009 14:51:54 Check angles 14:51:54 SkyScan query 14:51:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:51:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:51:54 Message to Master queued w/err=0: serial=127367 error=0 14:51:59 Received message from Master: op=Filter serial=127368 14:51:59 Color wheel filter change from 0 to 0 14:51:59 FLIGetFilterPos err=0 currentPosition=0 14:51:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:51:59 Filter is already there-color wheel unchanged 14:51:59 Received message from Master: op=Shutter serial=127369 14:51:59 Shutter LASER open 14:52:00 Received message from Camera: op=State serial=127371 14:52:00 GetSingleValue result=40 Value=cccccccc 14:52:00 SkyScan query 14:52:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:52:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:00 Parameters OK 14:52:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:00 Set A/D data flow result=40 14:52:00 Set A/D channel type result=40 14:52:00 Set A/D encoding result=40 14:52:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:00 Set channel filter=0.000000e+000 result=40 14:52:00 Config A/D Result=40 14:52:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:00 Get A/D filter: -9.255963e+061 result=40 14:52:00 Get A/D value=-858993460 result=40 14:52:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:00 Parameters OK 14:52:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:00 Set A/D data flow result=40 14:52:00 Set A/D channel type result=40 14:52:00 Set A/D encoding result=40 14:52:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:00 Set channel filter=0.000000e+000 result=40 14:52:00 Config A/D Result=40 14:52:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:00 Get A/D filter: -9.255963e+061 result=40 14:52:00 Get A/D value=-858993460 result=40 14:52:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:52:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:52:00 Aux= 14:52:00 Message to Camera, serial 127371 queued 14:52:09 Received message from Master: op=Shutter serial=127381 14:52:09 Shutter LASER close 14:52:09 Received message from Master: op=PointingHead serial=127385 14:52:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:52:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:52:10 Point started: ret=0 14:52:10 point_skyscan result=0 14:52:10 Check angles 14:52:10 SkyScan query 14:52:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.77<-21518 Statuses=0008 0009 14:52:11 Msec=0 True Az=112.995 Ze=-142.77 Az status=0008 Ze status=0009 14:52:11 Check angles 14:52:11 SkyScan query 14:52:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.785<-20119 Statuses=0008 0009 14:52:12 Msec=750 True Az=112.995 Ze=-121.785 Az status=0008 Ze status=0009 14:52:12 Check angles 14:52:12 SkyScan query 14:52:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.86<-18724 Statuses=0008 0009 14:52:12 Msec=1500 True Az=112.995 Ze=-100.86 Az status=0008 Ze status=0009 14:52:13 Check angles 14:52:13 SkyScan query 14:52:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.86<-17324 Statuses=0008 0009 14:52:13 Msec=2250 True Az=112.995 Ze=-79.86 Az status=0008 Ze status=0009 14:52:13 Check angles 14:52:13 SkyScan query 14:52:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.92<-15928 Statuses=0008 0009 14:52:14 Msec=3000 True Az=112.995 Ze=-58.92 Az status=0008 Ze status=0009 14:52:14 Check angles 14:52:14 SkyScan query 14:52:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.905<-14527 Statuses=0008 0009 14:52:15 Msec=3750 True Az=112.995 Ze=-37.905 Az status=0008 Ze status=0009 14:52:15 Check angles 14:52:15 SkyScan query 14:52:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.95<-13130 Statuses=0008 0009 14:52:15 Msec=4500 True Az=112.995 Ze=-16.95 Az status=0008 Ze status=0009 14:52:16 Check angles 14:52:16 SkyScan query 14:52:16 SkyScan query done: ret=0 az=113.01<-7534 ze=4.305<-11713 Statuses=0008 0009 14:52:16 Msec=5250 True Az=113.01 Ze=4.305 Az status=0008 Ze status=0009 14:52:16 Check angles 14:52:16 SkyScan query 14:52:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:52:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:52:17 Message to Master queued w/err=0: serial=127385 error=0 14:52:22 Received message from Master: op=Filter serial=127386 14:52:22 Color wheel filter change from 0 to 0 14:52:22 FLIGetFilterPos err=0 currentPosition=0 14:52:22 FLIGetStepsRemaining err=0 RemainingSteps=0 14:52:22 Filter is already there-color wheel unchanged 14:52:22 Received message from Master: op=Shutter serial=127387 14:52:22 Shutter LASER close 14:52:22 Received message from Camera: op=State serial=127389 14:52:22 GetSingleValue result=40 Value=cccccccc 14:52:22 SkyScan query 14:52:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:52:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:23 Parameters OK 14:52:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:23 Set A/D data flow result=40 14:52:23 Set A/D channel type result=40 14:52:23 Set A/D encoding result=40 14:52:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:23 Set channel filter=0.000000e+000 result=40 14:52:23 Config A/D Result=40 14:52:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:23 Get A/D filter: -9.255963e+061 result=40 14:52:23 Get A/D value=-858993460 result=40 14:52:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:23 Parameters OK 14:52:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:23 Set A/D data flow result=40 14:52:23 Set A/D channel type result=40 14:52:23 Set A/D encoding result=40 14:52:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:23 Set channel filter=0.000000e+000 result=40 14:52:23 Config A/D Result=40 14:52:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:23 Get A/D filter: -9.255963e+061 result=40 14:52:23 Get A/D value=-858993460 result=40 14:52:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:52:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:52:23 Aux= 14:52:23 Message to Camera, serial 127389 queued 14:53:00 Received message from Master: op=PointingHead serial=127402 14:53:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:53:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:53:00 Point started: ret=0 14:53:00 point_skyscan result=0 14:53:01 Check angles 14:53:01 SkyScan query 14:53:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:53:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:53:01 Message to Master queued w/err=0: serial=127402 error=0 14:53:06 Received message from Master: op=Filter serial=127403 14:53:06 Color wheel filter change from 0 to 0 14:53:06 FLIGetFilterPos err=0 currentPosition=0 14:53:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:53:06 Filter is already there-color wheel unchanged 14:53:07 Received message from Master: op=Shutter serial=127404 14:53:07 Shutter LASER close 14:53:07 Received message from Camera: op=State serial=127406 14:53:07 GetSingleValue result=40 Value=cccccccc 14:53:07 SkyScan query 14:53:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:53:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:07 Parameters OK 14:53:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:07 Set A/D data flow result=40 14:53:07 Set A/D channel type result=40 14:53:07 Set A/D encoding result=40 14:53:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:07 Set channel filter=0.000000e+000 result=40 14:53:07 Config A/D Result=40 14:53:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:07 Get A/D filter: -9.255963e+061 result=40 14:53:07 Get A/D value=-858993460 result=40 14:53:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:07 Parameters OK 14:53:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:07 Set A/D data flow result=40 14:53:07 Set A/D channel type result=40 14:53:07 Set A/D encoding result=40 14:53:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:07 Set channel filter=0.000000e+000 result=40 14:53:07 Config A/D Result=40 14:53:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:07 Get A/D filter: -9.255963e+061 result=40 14:53:07 Get A/D value=-858993460 result=40 14:53:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:53:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:53:07 Aux= 14:53:07 Message to Camera, serial 127406 queued 14:53:44 Received message from Master: op=PointingHead serial=127419 14:53:44 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:53:44 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:53:44 Point started: ret=0 14:53:44 point_skyscan result=0 14:53:45 Check angles 14:53:45 SkyScan query 14:53:46 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.51<-12434 Statuses=0009 0008 14:53:46 Msec=0 True Az=135.915 Ze=-6.51 Az status=0009 Ze status=0008 14:53:46 Check angles 14:53:46 SkyScan query 14:53:46 SkyScan query done: ret=0 az=153.735<-10249 ze=-6.51<-12434 Statuses=0009 0008 14:53:46 Msec=750 True Az=153.735 Ze=-6.51 Az status=0009 Ze status=0008 14:53:47 Check angles 14:53:47 SkyScan query 14:53:47 SkyScan query done: ret=0 az=171.195<-11413 ze=-6.495<-12433 Statuses=0009 0008 14:53:47 Msec=1500 True Az=171.195 Ze=-6.495 Az status=0009 Ze status=0008 14:53:47 Check angles 14:53:47 SkyScan query 14:53:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:53:48 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:53:48 Message to Master queued w/err=0: serial=127419 error=0 14:53:53 Received message from Master: op=Filter serial=127420 14:53:53 Color wheel filter change from 0 to 0 14:53:53 FLIGetFilterPos err=0 currentPosition=0 14:53:53 FLIGetStepsRemaining err=0 RemainingSteps=0 14:53:53 Filter is already there-color wheel unchanged 14:53:53 Received message from Master: op=Shutter serial=127421 14:53:53 Shutter LASER close 14:53:53 Received message from Camera: op=State serial=127423 14:53:53 GetSingleValue result=40 Value=cccccccc 14:53:53 SkyScan query 14:53:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:53:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:54 Parameters OK 14:53:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:54 Set A/D data flow result=40 14:53:54 Set A/D channel type result=40 14:53:54 Set A/D encoding result=40 14:53:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:54 Set channel filter=0.000000e+000 result=40 14:53:54 Config A/D Result=40 14:53:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:54 Get A/D filter: -9.255963e+061 result=40 14:53:54 Get A/D value=-858993460 result=40 14:53:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:54 Parameters OK 14:53:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:54 Set A/D data flow result=40 14:53:54 Set A/D channel type result=40 14:53:54 Set A/D encoding result=40 14:53:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:54 Set channel filter=0.000000e+000 result=40 14:53:54 Config A/D Result=40 14:53:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:54 Get A/D filter: -9.255963e+061 result=40 14:53:54 Get A/D value=-858993460 result=40 14:53:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:53:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:53:54 Aux= 14:53:54 Message to Camera, serial 127423 queued [UTC 2019-3-5 14:54:31] 14:54:31 Received message from Master: op=PointingHead serial=127436 14:54:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:54:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:54:31 Point started: ret=0 14:54:31 point_skyscan result=0 14:54:32 Check angles 14:54:32 SkyScan query 14:54:32 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 14:54:32 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 14:54:33 Check angles 14:54:33 SkyScan query 14:54:33 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 14:54:33 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 14:54:33 Check angles 14:54:33 SkyScan query 14:54:34 SkyScan query done: ret=0 az=117.285<-7819 ze=6.495<-11567 Statuses=0009 0008 14:54:34 Msec=1500 True Az=117.285 Ze=6.495 Az status=0009 Ze status=0008 14:54:34 Check angles 14:54:34 SkyScan query 14:54:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:54:35 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:54:35 Message to Master queued w/err=0: serial=127436 error=0 14:54:40 Received message from Master: op=Filter serial=127437 14:54:40 Color wheel filter change from 0 to 0 14:54:40 FLIGetFilterPos err=0 currentPosition=0 14:54:40 FLIGetStepsRemaining err=0 RemainingSteps=0 14:54:40 Filter is already there-color wheel unchanged 14:54:40 Received message from Master: op=Shutter serial=127438 14:54:40 Shutter LASER close 14:54:40 Received message from Camera: op=State serial=127440 14:54:40 GetSingleValue result=40 Value=cccccccc 14:54:40 SkyScan query 14:54:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:54:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:40 Parameters OK 14:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:40 Set A/D data flow result=40 14:54:40 Set A/D channel type result=40 14:54:40 Set A/D encoding result=40 14:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:40 Set channel filter=0.000000e+000 result=40 14:54:40 Config A/D Result=40 14:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:40 Get A/D filter: -9.255963e+061 result=40 14:54:40 Get A/D value=-858993460 result=40 14:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:40 Parameters OK 14:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:40 Set A/D data flow result=40 14:54:40 Set A/D channel type result=40 14:54:40 Set A/D encoding result=40 14:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:40 Set channel filter=0.000000e+000 result=40 14:54:40 Config A/D Result=40 14:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:40 Get A/D filter: -9.255963e+061 result=40 14:54:40 Get A/D value=-858993460 result=40 14:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:54:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:54:40 Aux= 14:54:40 Message to Camera, serial 127440 queued 14:55:17 Received message from Master: op=PointingHead serial=127453 14:55:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:55:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:55:18 Point started: ret=0 14:55:18 point_skyscan result=0 14:55:18 Check angles 14:55:18 SkyScan query 14:55:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 14:55:19 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 14:55:19 Check angles 14:55:19 SkyScan query 14:55:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 14:55:20 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 14:55:20 Check angles 14:55:20 SkyScan query 14:55:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 14:55:20 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 14:55:21 Check angles 14:55:21 SkyScan query 14:55:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 14:55:21 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 14:55:21 Check angles 14:55:21 SkyScan query 14:55:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.46<-19164 Statuses=0008 0009 14:55:22 Msec=3000 True Az=112.995 Ze=-107.46 Az status=0008 Ze status=0009 14:55:22 Check angles 14:55:22 SkyScan query 14:55:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.415<-20561 Statuses=0008 0009 14:55:23 Msec=3750 True Az=112.995 Ze=-128.415 Az status=0008 Ze status=0009 14:55:23 Check angles 14:55:23 SkyScan query 14:55:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.415<-21961 Statuses=0008 0009 14:55:23 Msec=4500 True Az=112.995 Ze=-149.415 Az status=0008 Ze status=0009 14:55:24 Check angles 14:55:24 SkyScan query 14:55:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.355<-23357 Statuses=0008 0009 14:55:24 Msec=5250 True Az=112.995 Ze=-170.355 Az status=0008 Ze status=0009 14:55:24 Check angles 14:55:24 SkyScan query 14:55:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:55:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:55:25 Message to Master queued w/err=0: serial=127453 error=0 14:55:30 Received message from Master: op=Filter serial=127454 14:55:30 Color wheel filter change from 0 to 0 14:55:30 FLIGetFilterPos err=0 currentPosition=0 14:55:30 FLIGetStepsRemaining err=0 RemainingSteps=0 14:55:30 Filter is already there-color wheel unchanged 14:55:30 Received message from Master: op=Shutter serial=127455 14:55:30 Shutter LASER open 14:55:30 Received message from Camera: op=State serial=127457 14:55:30 GetSingleValue result=40 Value=cccccccc 14:55:30 SkyScan query 14:55:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:55:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:31 Parameters OK 14:55:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:31 Set A/D data flow result=40 14:55:31 Set A/D channel type result=40 14:55:31 Set A/D encoding result=40 14:55:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:31 Set channel filter=0.000000e+000 result=40 14:55:31 Config A/D Result=40 14:55:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:31 Get A/D filter: -9.255963e+061 result=40 14:55:31 Get A/D value=-858993460 result=40 14:55:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:31 Parameters OK 14:55:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:31 Set A/D data flow result=40 14:55:31 Set A/D channel type result=40 14:55:31 Set A/D encoding result=40 14:55:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:31 Set channel filter=0.000000e+000 result=40 14:55:31 Config A/D Result=40 14:55:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:31 Get A/D filter: -9.255963e+061 result=40 14:55:31 Get A/D value=-858993460 result=40 14:55:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:55:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:55:31 Aux= 14:55:31 Message to Camera, serial 127457 queued 14:55:39 Received message from Master: op=Shutter serial=127467 14:55:39 Shutter LASER close 14:55:40 Received message from Master: op=PointingHead serial=127471 14:55:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:55:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:55:40 Point started: ret=0 14:55:40 point_skyscan result=0 14:55:41 Check angles 14:55:41 SkyScan query 14:55:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 14:55:41 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 14:55:42 Check angles 14:55:42 SkyScan query 14:55:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.965<-20131 Statuses=0008 0009 14:55:42 Msec=750 True Az=112.995 Ze=-121.965 Az status=0008 Ze status=0009 14:55:42 Check angles 14:55:42 SkyScan query 14:55:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.025<-18735 Statuses=0008 0009 14:55:43 Msec=1500 True Az=112.995 Ze=-101.025 Az status=0008 Ze status=0009 14:55:43 Check angles 14:55:43 SkyScan query 14:55:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.545<-17303 Statuses=0008 0009 14:55:44 Msec=2250 True Az=112.995 Ze=-79.545 Az status=0008 Ze status=0009 14:55:44 Check angles 14:55:44 SkyScan query 14:55:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.605<-15907 Statuses=0008 0009 14:55:44 Msec=3000 True Az=112.995 Ze=-58.605 Az status=0008 Ze status=0009 14:55:45 Check angles 14:55:45 SkyScan query 14:55:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.635<-14509 Statuses=0008 0009 14:55:45 Msec=3750 True Az=112.995 Ze=-37.635 Az status=0008 Ze status=0009 14:55:45 Check angles 14:55:45 SkyScan query 14:55:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.305<-13087 Statuses=0008 0009 14:55:46 Msec=4500 True Az=112.995 Ze=-16.305 Az status=0008 Ze status=0009 14:55:46 Check angles 14:55:46 SkyScan query 14:55:47 SkyScan query done: ret=0 az=112.995<-7533 ze=4.515<-11699 Statuses=0008 0009 14:55:47 Msec=5250 True Az=112.995 Ze=4.515 Az status=0008 Ze status=0009 14:55:47 Check angles 14:55:47 SkyScan query 14:55:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:55:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:55:47 Message to Master queued w/err=0: serial=127471 error=0 14:55:52 Received message from Master: op=Filter serial=127472 14:55:52 Color wheel filter change from 0 to 0 14:55:52 FLIGetFilterPos err=0 currentPosition=0 14:55:52 FLIGetStepsRemaining err=0 RemainingSteps=0 14:55:52 Filter is already there-color wheel unchanged 14:55:53 Received message from Master: op=Shutter serial=127473 14:55:53 Shutter LASER close 14:55:53 Received message from Camera: op=State serial=127475 14:55:53 GetSingleValue result=40 Value=cccccccc 14:55:53 SkyScan query 14:55:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:55:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:53 Parameters OK 14:55:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:53 Set A/D data flow result=40 14:55:53 Set A/D channel type result=40 14:55:53 Set A/D encoding result=40 14:55:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:53 Set channel filter=0.000000e+000 result=40 14:55:53 Config A/D Result=40 14:55:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:53 Get A/D filter: -9.255963e+061 result=40 14:55:53 Get A/D value=-858993460 result=40 14:55:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:53 Parameters OK 14:55:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:53 Set A/D data flow result=40 14:55:53 Set A/D channel type result=40 14:55:53 Set A/D encoding result=40 14:55:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:53 Set channel filter=0.000000e+000 result=40 14:55:53 Config A/D Result=40 14:55:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:53 Get A/D filter: -9.255963e+061 result=40 14:55:53 Get A/D value=-858993460 result=40 14:55:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:55:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:55:53 Aux= 14:55:53 Message to Camera, serial 127475 queued 14:56:30 Received message from Master: op=PointingHead serial=127488 14:56:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:56:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:56:31 Point started: ret=0 14:56:31 point_skyscan result=0 14:56:31 Check angles 14:56:31 SkyScan query 14:56:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:56:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:56:32 Message to Master queued w/err=0: serial=127488 error=0 14:56:37 Received message from Master: op=Filter serial=127489 14:56:37 Color wheel filter change from 0 to 0 14:56:37 FLIGetFilterPos err=0 currentPosition=0 14:56:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:56:37 Filter is already there-color wheel unchanged 14:56:37 Received message from Master: op=Shutter serial=127490 14:56:37 Shutter LASER close 14:56:37 Received message from Camera: op=State serial=127492 14:56:37 GetSingleValue result=40 Value=cccccccc 14:56:37 SkyScan query 14:56:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:56:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:38 Parameters OK 14:56:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:38 Set A/D data flow result=40 14:56:38 Set A/D channel type result=40 14:56:38 Set A/D encoding result=40 14:56:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:38 Set channel filter=0.000000e+000 result=40 14:56:38 Config A/D Result=40 14:56:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:38 Get A/D filter: -9.255963e+061 result=40 14:56:38 Get A/D value=-858993460 result=40 14:56:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:38 Parameters OK 14:56:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:38 Set A/D data flow result=40 14:56:38 Set A/D channel type result=40 14:56:38 Set A/D encoding result=40 14:56:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:38 Set channel filter=0.000000e+000 result=40 14:56:38 Config A/D Result=40 14:56:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:38 Get A/D filter: -9.255963e+061 result=40 14:56:38 Get A/D value=-858993460 result=40 14:56:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:56:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:56:38 Aux= 14:56:38 Message to Camera, serial 127492 queued 14:57:15 Received message from Master: op=PointingHead serial=127505 14:57:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:57:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:57:15 Point started: ret=0 14:57:15 point_skyscan result=0 14:57:16 Check angles 14:57:16 SkyScan query 14:57:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:57:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:57:16 Message to Master queued w/err=0: serial=127505 error=0 14:57:21 Received message from Master: op=Filter serial=127506 14:57:21 Color wheel filter change from 0 to 0 14:57:21 FLIGetFilterPos err=0 currentPosition=0 14:57:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:57:21 Filter is already there-color wheel unchanged 14:57:21 Received message from Master: op=Shutter serial=127507 14:57:21 Shutter LASER close 14:57:21 Received message from Camera: op=State serial=127509 14:57:21 GetSingleValue result=40 Value=cccccccc 14:57:21 SkyScan query 14:57:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:57:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:22 Parameters OK 14:57:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:22 Set A/D data flow result=40 14:57:22 Set A/D channel type result=40 14:57:22 Set A/D encoding result=40 14:57:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:22 Set channel filter=0.000000e+000 result=40 14:57:22 Config A/D Result=40 14:57:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:22 Get A/D filter: -9.255963e+061 result=40 14:57:22 Get A/D value=-858993460 result=40 14:57:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:22 Parameters OK 14:57:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:22 Set A/D data flow result=40 14:57:22 Set A/D channel type result=40 14:57:22 Set A/D encoding result=40 14:57:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:22 Set channel filter=0.000000e+000 result=40 14:57:22 Config A/D Result=40 14:57:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:22 Get A/D filter: -9.255963e+061 result=40 14:57:22 Get A/D value=-858993460 result=40 14:57:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:57:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:57:22 Aux= 14:57:22 Message to Camera, serial 127509 queued 14:57:58 Received message from Master: op=PointingHead serial=127521 14:57:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:57:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:57:58 Point started: ret=0 14:57:58 point_skyscan result=0 14:57:59 Check angles 14:57:59 SkyScan query 14:58:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:58:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:58:00 Message to Master queued w/err=0: serial=127521 error=0 14:58:05 Received message from Master: op=Filter serial=127522 14:58:05 Color wheel filter change from 0 to 0 14:58:05 FLIGetFilterPos err=0 currentPosition=0 14:58:05 FLIGetStepsRemaining err=0 RemainingSteps=0 14:58:05 Filter is already there-color wheel unchanged 14:58:05 Received message from Master: op=Shutter serial=127523 14:58:05 Shutter LASER close 14:58:05 Received message from Camera: op=State serial=127525 14:58:05 GetSingleValue result=40 Value=cccccccc 14:58:05 SkyScan query 14:58:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:58:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:05 Parameters OK 14:58:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:05 Set A/D data flow result=40 14:58:05 Set A/D channel type result=40 14:58:05 Set A/D encoding result=40 14:58:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:05 Set channel filter=0.000000e+000 result=40 14:58:05 Config A/D Result=40 14:58:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:05 Get A/D filter: -9.255963e+061 result=40 14:58:05 Get A/D value=-858993460 result=40 14:58:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:05 Parameters OK 14:58:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:05 Set A/D data flow result=40 14:58:05 Set A/D channel type result=40 14:58:05 Set A/D encoding result=40 14:58:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:05 Set channel filter=0.000000e+000 result=40 14:58:05 Config A/D Result=40 14:58:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:05 Get A/D filter: -9.255963e+061 result=40 14:58:05 Get A/D value=-858993460 result=40 14:58:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:58:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:58:05 Aux= 14:58:05 Message to Camera, serial 127525 queued 14:58:42 Received message from Master: op=PointingHead serial=127538 14:58:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:58:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:58:43 Point started: ret=0 14:58:43 point_skyscan result=0 14:58:43 Check angles 14:58:43 SkyScan query 14:58:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 14:58:44 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 14:58:44 Check angles 14:58:44 SkyScan query 14:58:45 SkyScan query done: ret=0 az=112.98<-7532 ze=-44.25<-14950 Statuses=0008 0009 14:58:45 Msec=750 True Az=112.98 Ze=-44.25 Az status=0008 Ze status=0009 14:58:45 Check angles 14:58:45 SkyScan query 14:58:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.565<-16371 Statuses=0008 0009 14:58:45 Msec=1500 True Az=112.995 Ze=-65.565 Az status=0008 Ze status=0009 14:58:46 Check angles 14:58:46 SkyScan query 14:58:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.55<-17770 Statuses=0008 0009 14:58:46 Msec=2250 True Az=112.995 Ze=-86.55 Az status=0008 Ze status=0009 14:58:46 Check angles 14:58:46 SkyScan query 14:58:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-108<-19200 Statuses=0008 0009 14:58:47 Msec=3000 True Az=112.995 Ze=-108 Az status=0008 Ze status=0009 14:58:47 Check angles 14:58:47 SkyScan query 14:58:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.925<-20595 Statuses=0008 0009 14:58:48 Msec=3750 True Az=112.995 Ze=-128.925 Az status=0008 Ze status=0009 14:58:48 Check angles 14:58:48 SkyScan query 14:58:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.895<-21993 Statuses=0008 0009 14:58:48 Msec=4500 True Az=112.995 Ze=-149.895 Az status=0008 Ze status=0009 14:58:49 Check angles 14:58:49 SkyScan query 14:58:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.075<-23405 Statuses=0008 0009 14:58:49 Msec=5250 True Az=112.995 Ze=-171.075 Az status=0008 Ze status=0009 14:58:49 Check angles 14:58:49 SkyScan query 14:58:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:58:50 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:58:50 Message to Master queued w/err=0: serial=127538 error=0 14:58:55 Received message from Master: op=Filter serial=127539 14:58:55 Color wheel filter change from 0 to 0 14:58:55 FLIGetFilterPos err=0 currentPosition=0 14:58:55 FLIGetStepsRemaining err=0 RemainingSteps=0 14:58:55 Filter is already there-color wheel unchanged 14:58:55 Received message from Master: op=Shutter serial=127540 14:58:55 Shutter LASER open 14:58:55 Received message from Camera: op=State serial=127542 14:58:55 GetSingleValue result=40 Value=cccccccc 14:58:55 SkyScan query 14:58:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:58:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:56 Parameters OK 14:58:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:56 Set A/D data flow result=40 14:58:56 Set A/D channel type result=40 14:58:56 Set A/D encoding result=40 14:58:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:56 Set channel filter=0.000000e+000 result=40 14:58:56 Config A/D Result=40 14:58:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:56 Get A/D filter: -9.255963e+061 result=40 14:58:56 Get A/D value=-858993460 result=40 14:58:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:56 Parameters OK 14:58:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:56 Set A/D data flow result=40 14:58:56 Set A/D channel type result=40 14:58:56 Set A/D encoding result=40 14:58:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:56 Set channel filter=0.000000e+000 result=40 14:58:56 Config A/D Result=40 14:58:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:56 Get A/D filter: -9.255963e+061 result=40 14:58:56 Get A/D value=-858993460 result=40 14:58:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:58:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:58:56 Aux= 14:58:56 Message to Camera, serial 127542 queued 14:59:04 Received message from Master: op=Shutter serial=127552 14:59:04 Shutter LASER close 14:59:05 Received message from Master: op=PointingHead serial=127556 14:59:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:59:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:59:05 Point started: ret=0 14:59:05 point_skyscan result=0 14:59:06 Check angles 14:59:06 SkyScan query 14:59:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 14:59:07 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 14:59:07 Check angles 14:59:07 SkyScan query 14:59:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 14:59:07 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 14:59:08 Check angles 14:59:08 SkyScan query 14:59:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.635<-18709 Statuses=0008 0009 14:59:08 Msec=1500 True Az=112.995 Ze=-100.635 Az status=0008 Ze status=0009 14:59:08 Check angles 14:59:08 SkyScan query 14:59:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.65<-17310 Statuses=0008 0009 14:59:09 Msec=2250 True Az=112.995 Ze=-79.65 Az status=0008 Ze status=0009 14:59:09 Check angles 14:59:09 SkyScan query 14:59:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.74<-15916 Statuses=0008 0009 14:59:10 Msec=3000 True Az=112.995 Ze=-58.74 Az status=0008 Ze status=0009 14:59:10 Check angles 14:59:10 SkyScan query 14:59:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.755<-14517 Statuses=0008 0009 14:59:10 Msec=3750 True Az=112.995 Ze=-37.755 Az status=0008 Ze status=0009 14:59:11 Check angles 14:59:11 SkyScan query 14:59:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.785<-13119 Statuses=0008 0009 14:59:11 Msec=4500 True Az=112.995 Ze=-16.785 Az status=0008 Ze status=0009 14:59:11 Check angles 14:59:11 SkyScan query 14:59:12 SkyScan query done: ret=0 az=113.01<-7534 ze=4.11<-11726 Statuses=0008 0009 14:59:12 Msec=5250 True Az=113.01 Ze=4.11 Az status=0008 Ze status=0009 14:59:12 Check angles 14:59:12 SkyScan query 14:59:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:59:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:59:13 Message to Master queued w/err=0: serial=127556 error=0 14:59:18 Received message from Master: op=Filter serial=127557 14:59:18 Color wheel filter change from 0 to 0 14:59:18 FLIGetFilterPos err=0 currentPosition=0 14:59:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:59:18 Filter is already there-color wheel unchanged 14:59:18 Received message from Master: op=Shutter serial=127558 14:59:18 Shutter LASER close 14:59:18 Received message from Camera: op=State serial=127560 14:59:18 GetSingleValue result=40 Value=cccccccc 14:59:18 SkyScan query 14:59:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:59:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:19 Parameters OK 14:59:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:19 Set A/D data flow result=40 14:59:19 Set A/D channel type result=40 14:59:19 Set A/D encoding result=40 14:59:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:19 Set channel filter=0.000000e+000 result=40 14:59:19 Config A/D Result=40 14:59:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:19 Get A/D filter: -9.255963e+061 result=40 14:59:19 Get A/D value=-858993460 result=40 14:59:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:19 Parameters OK 14:59:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:19 Set A/D data flow result=40 14:59:19 Set A/D channel type result=40 14:59:19 Set A/D encoding result=40 14:59:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:19 Set channel filter=0.000000e+000 result=40 14:59:19 Config A/D Result=40 14:59:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:19 Get A/D filter: -9.255963e+061 result=40 14:59:19 Get A/D value=-858993460 result=40 14:59:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:59:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:59:19 Aux= 14:59:19 Message to Camera, serial 127560 queued 14:59:55 Received message from Master: op=PointingHead serial=127573 14:59:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:59:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:59:56 Point started: ret=0 14:59:56 point_skyscan result=0 14:59:56 Check angles 14:59:56 SkyScan query 14:59:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:59:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:59:57 Message to Master queued w/err=0: serial=127573 error=0 15:00:02 Received message from Master: op=Filter serial=127574 15:00:02 Color wheel filter change from 0 to 0 15:00:02 FLIGetFilterPos err=0 currentPosition=0 15:00:02 FLIGetStepsRemaining err=0 RemainingSteps=0 15:00:02 Filter is already there-color wheel unchanged 15:00:02 Received message from Master: op=Shutter serial=127575 15:00:02 Shutter LASER close 15:00:02 Received message from Camera: op=State serial=127577 15:00:02 GetSingleValue result=40 Value=cccccccc 15:00:02 SkyScan query 15:00:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:00:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:03 Parameters OK 15:00:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:03 Set A/D data flow result=40 15:00:03 Set A/D channel type result=40 15:00:03 Set A/D encoding result=40 15:00:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:03 Set channel filter=0.000000e+000 result=40 15:00:03 Config A/D Result=40 15:00:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:03 Get A/D filter: -9.255963e+061 result=40 15:00:03 Get A/D value=-858993460 result=40 15:00:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:03 Parameters OK 15:00:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:03 Set A/D data flow result=40 15:00:03 Set A/D channel type result=40 15:00:03 Set A/D encoding result=40 15:00:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:03 Set channel filter=0.000000e+000 result=40 15:00:03 Config A/D Result=40 15:00:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:03 Get A/D filter: -9.255963e+061 result=40 15:00:03 Get A/D value=-858993460 result=40 15:00:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:00:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:00:03 Aux= 15:00:03 Message to Camera, serial 127577 queued 15:00:40 Received message from Master: op=PointingHead serial=127590 15:00:40 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 15:00:40 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 15:00:40 Point started: ret=0 15:00:40 point_skyscan result=0 15:00:41 Check angles 15:00:41 SkyScan query 15:00:41 SkyScan query done: ret=0 az=136.35<-9090 ze=-6.51<-12434 Statuses=0009 0008 15:00:41 Msec=0 True Az=136.35 Ze=-6.51 Az status=0009 Ze status=0008 15:00:42 Check angles 15:00:42 SkyScan query 15:00:42 SkyScan query done: ret=0 az=154.2<-10280 ze=-6.495<-12433 Statuses=0009 0008 15:00:42 Msec=750 True Az=154.2 Ze=-6.495 Az status=0009 Ze status=0008 15:00:42 Check angles 15:00:42 SkyScan query 15:00:43 SkyScan query done: ret=0 az=171.645<-11443 ze=-6.495<-12433 Statuses=0009 0008 15:00:43 Msec=1500 True Az=171.645 Ze=-6.495 Az status=0009 Ze status=0008 15:00:43 Check angles 15:00:43 SkyScan query 15:00:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:00:44 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 15:00:44 Message to Master queued w/err=0: serial=127590 error=0 15:00:49 Received message from Master: op=Filter serial=127591 15:00:49 Color wheel filter change from 0 to 0 15:00:49 FLIGetFilterPos err=0 currentPosition=0 15:00:49 FLIGetStepsRemaining err=0 RemainingSteps=0 15:00:49 Filter is already there-color wheel unchanged 15:00:49 Received message from Master: op=Shutter serial=127592 15:00:49 Shutter LASER close 15:00:49 Received message from Camera: op=State serial=127594 15:00:49 GetSingleValue result=40 Value=cccccccc 15:00:49 SkyScan query 15:00:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:00:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:49 Parameters OK 15:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:49 Set A/D data flow result=40 15:00:49 Set A/D channel type result=40 15:00:49 Set A/D encoding result=40 15:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:49 Set channel filter=0.000000e+000 result=40 15:00:49 Config A/D Result=40 15:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:49 Get A/D filter: -9.255963e+061 result=40 15:00:49 Get A/D value=-858993460 result=40 15:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:49 Parameters OK 15:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:49 Set A/D data flow result=40 15:00:49 Set A/D channel type result=40 15:00:49 Set A/D encoding result=40 15:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:49 Set channel filter=0.000000e+000 result=40 15:00:49 Config A/D Result=40 15:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:49 Get A/D filter: -9.255963e+061 result=40 15:00:49 Get A/D value=-858993460 result=40 15:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:00:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:00:49 Aux= 15:00:49 Message to Camera, serial 127594 queued 15:01:26 Received message from Master: op=PointingHead serial=127607 15:01:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:01:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:01:27 Point started: ret=0 15:01:27 point_skyscan result=0 15:01:27 Check angles 15:01:27 SkyScan query 15:01:28 SkyScan query done: ret=0 az=152.895<-10193 ze=6.51<-11566 Statuses=0009 0008 15:01:28 Msec=0 True Az=152.895 Ze=6.51 Az status=0009 Ze status=0008 15:01:28 Check angles 15:01:28 SkyScan query 15:01:29 SkyScan query done: ret=0 az=135.165<-9011 ze=6.495<-11567 Statuses=0009 0008 15:01:29 Msec=750 True Az=135.165 Ze=6.495 Az status=0009 Ze status=0008 15:01:29 Check angles 15:01:29 SkyScan query 15:01:29 SkyScan query done: ret=0 az=117.66<-7844 ze=6.495<-11567 Statuses=0009 0008 15:01:29 Msec=1500 True Az=117.66 Ze=6.495 Az status=0009 Ze status=0008 15:01:30 Check angles 15:01:30 SkyScan query 15:01:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:01:30 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:01:30 Message to Master queued w/err=0: serial=127607 error=0 15:01:35 Received message from Master: op=Filter serial=127608 15:01:35 Color wheel filter change from 0 to 0 15:01:35 FLIGetFilterPos err=0 currentPosition=0 15:01:35 FLIGetStepsRemaining err=0 RemainingSteps=0 15:01:35 Filter is already there-color wheel unchanged 15:01:35 Received message from Master: op=Shutter serial=127609 15:01:35 Shutter LASER close 15:01:35 Received message from Camera: op=State serial=127611 15:01:35 GetSingleValue result=40 Value=cccccccc 15:01:35 SkyScan query 15:01:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:01:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:36 Parameters OK 15:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:36 Set A/D data flow result=40 15:01:36 Set A/D channel type result=40 15:01:36 Set A/D encoding result=40 15:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:36 Set channel filter=0.000000e+000 result=40 15:01:36 Config A/D Result=40 15:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:36 Get A/D filter: -9.255963e+061 result=40 15:01:36 Get A/D value=-858993460 result=40 15:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:36 Parameters OK 15:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:36 Set A/D data flow result=40 15:01:36 Set A/D channel type result=40 15:01:36 Set A/D encoding result=40 15:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:36 Set channel filter=0.000000e+000 result=40 15:01:36 Config A/D Result=40 15:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:36 Get A/D filter: -9.255963e+061 result=40 15:01:36 Get A/D value=-858993460 result=40 15:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:01:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:01:36 Aux= 15:01:36 Message to Camera, serial 127611 queued 15:02:13 Received message from Master: op=PointingHead serial=127624 15:02:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:02:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:02:13 Point started: ret=0 15:02:13 point_skyscan result=0 15:02:14 Check angles 15:02:14 SkyScan query 15:02:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 15:02:14 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 15:02:15 Check angles 15:02:15 SkyScan query 15:02:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.31<-14954 Statuses=0008 0009 15:02:15 Msec=750 True Az=112.995 Ze=-44.31 Az status=0008 Ze status=0009 15:02:15 Check angles 15:02:15 SkyScan query 15:02:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 15:02:16 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 15:02:16 Check angles 15:02:16 SkyScan query 15:02:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.19<-17746 Statuses=0008 0009 15:02:17 Msec=2250 True Az=112.995 Ze=-86.19 Az status=0008 Ze status=0009 15:02:17 Check angles 15:02:17 SkyScan query 15:02:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.13<-19142 Statuses=0008 0009 15:02:17 Msec=3000 True Az=112.995 Ze=-107.13 Az status=0008 Ze status=0009 15:02:18 Check angles 15:02:18 SkyScan query 15:02:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.115<-20541 Statuses=0008 0009 15:02:18 Msec=3750 True Az=112.995 Ze=-128.115 Az status=0008 Ze status=0009 15:02:18 Check angles 15:02:18 SkyScan query 15:02:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.1<-21940 Statuses=0008 0009 15:02:19 Msec=4500 True Az=112.995 Ze=-149.1 Az status=0008 Ze status=0009 15:02:19 Check angles 15:02:19 SkyScan query 15:02:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.04<-23336 Statuses=0008 0009 15:02:20 Msec=5250 True Az=112.995 Ze=-170.04 Az status=0008 Ze status=0009 15:02:20 Check angles 15:02:20 SkyScan query 15:02:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:02:20 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:02:20 Message to Master queued w/err=0: serial=127624 error=0 15:02:25 Received message from Master: op=Filter serial=127625 15:02:25 Color wheel filter change from 0 to 0 15:02:25 FLIGetFilterPos err=0 currentPosition=0 15:02:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:02:25 Filter is already there-color wheel unchanged 15:02:26 Received message from Master: op=Shutter serial=127626 15:02:26 Shutter LASER open 15:02:26 Received message from Camera: op=State serial=127628 15:02:26 GetSingleValue result=40 Value=cccccccc 15:02:26 SkyScan query 15:02:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:02:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:26 Parameters OK 15:02:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:26 Set A/D data flow result=40 15:02:26 Set A/D channel type result=40 15:02:26 Set A/D encoding result=40 15:02:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:26 Set channel filter=0.000000e+000 result=40 15:02:26 Config A/D Result=40 15:02:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:26 Get A/D filter: -9.255963e+061 result=40 15:02:26 Get A/D value=-858993460 result=40 15:02:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:26 Parameters OK 15:02:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:26 Set A/D data flow result=40 15:02:26 Set A/D channel type result=40 15:02:26 Set A/D encoding result=40 15:02:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:26 Set channel filter=0.000000e+000 result=40 15:02:26 Config A/D Result=40 15:02:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:26 Get A/D filter: -9.255963e+061 result=40 15:02:26 Get A/D value=-858993460 result=40 15:02:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:02:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:02:26 Aux= 15:02:26 Message to Camera, serial 127628 queued 15:02:35 Received message from Master: op=Shutter serial=127638 15:02:35 Shutter LASER close 15:02:35 Received message from Master: op=PointingHead serial=127642 15:02:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:02:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:02:36 Point started: ret=0 15:02:36 point_skyscan result=0 15:02:36 Check angles 15:02:36 SkyScan query 15:02:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 15:02:37 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 15:02:37 Check angles 15:02:37 SkyScan query 15:02:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 15:02:38 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 15:02:38 Check angles 15:02:38 SkyScan query 15:02:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.19<-18746 Statuses=0008 0009 15:02:38 Msec=1500 True Az=112.995 Ze=-101.19 Az status=0008 Ze status=0009 15:02:39 Check angles 15:02:39 SkyScan query 15:02:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.205<-17347 Statuses=0008 0009 15:02:39 Msec=2250 True Az=112.995 Ze=-80.205 Az status=0008 Ze status=0009 15:02:39 Check angles 15:02:39 SkyScan query 15:02:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.755<-15917 Statuses=0008 0009 15:02:40 Msec=3000 True Az=112.995 Ze=-58.755 Az status=0008 Ze status=0009 15:02:40 Check angles 15:02:40 SkyScan query 15:02:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.77<-14518 Statuses=0008 0009 15:02:41 Msec=3750 True Az=112.995 Ze=-37.77 Az status=0008 Ze status=0009 15:02:41 Check angles 15:02:41 SkyScan query 15:02:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.815<-13121 Statuses=0008 0009 15:02:41 Msec=4500 True Az=112.995 Ze=-16.815 Az status=0008 Ze status=0009 15:02:42 Check angles 15:02:42 SkyScan query 15:02:42 SkyScan query done: ret=0 az=113.01<-7534 ze=4.41<-11706 Statuses=0008 0009 15:02:42 Msec=5250 True Az=113.01 Ze=4.41 Az status=0008 Ze status=0009 15:02:42 Check angles 15:02:42 SkyScan query 15:02:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:02:43 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:02:43 Message to Master queued w/err=0: serial=127642 error=0 15:02:48 Received message from Master: op=Filter serial=127643 15:02:48 Color wheel filter change from 0 to 0 15:02:48 FLIGetFilterPos err=0 currentPosition=0 15:02:48 FLIGetStepsRemaining err=0 RemainingSteps=0 15:02:48 Filter is already there-color wheel unchanged 15:02:48 Received message from Master: op=Shutter serial=127644 15:02:48 Shutter LASER close 15:02:48 Received message from Camera: op=State serial=127646 15:02:48 GetSingleValue result=40 Value=cccccccc 15:02:48 SkyScan query 15:02:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:02:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:49 Parameters OK 15:02:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:49 Set A/D data flow result=40 15:02:49 Set A/D channel type result=40 15:02:49 Set A/D encoding result=40 15:02:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:49 Set channel filter=0.000000e+000 result=40 15:02:49 Config A/D Result=40 15:02:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:49 Get A/D filter: -9.255963e+061 result=40 15:02:49 Get A/D value=-858993460 result=40 15:02:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:49 Parameters OK 15:02:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:49 Set A/D data flow result=40 15:02:49 Set A/D channel type result=40 15:02:49 Set A/D encoding result=40 15:02:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:49 Set channel filter=0.000000e+000 result=40 15:02:49 Config A/D Result=40 15:02:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:49 Get A/D filter: -9.255963e+061 result=40 15:02:49 Get A/D value=-858993460 result=40 15:02:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:02:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:02:49 Aux= 15:02:49 Message to Camera, serial 127646 queued 15:03:26 Received message from Master: op=PointingHead serial=127659 15:03:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:03:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:03:26 Point started: ret=0 15:03:26 point_skyscan result=0 15:03:27 Check angles 15:03:27 SkyScan query 15:03:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:03:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:03:27 Message to Master queued w/err=0: serial=127659 error=0 15:03:32 Received message from Master: op=Filter serial=127660 15:03:32 Color wheel filter change from 0 to 0 15:03:32 FLIGetFilterPos err=0 currentPosition=0 15:03:32 FLIGetStepsRemaining err=0 RemainingSteps=0 15:03:32 Filter is already there-color wheel unchanged 15:03:33 Received message from Master: op=Shutter serial=127661 15:03:33 Shutter LASER close 15:03:33 Received message from Camera: op=State serial=127663 15:03:33 GetSingleValue result=40 Value=cccccccc 15:03:33 SkyScan query 15:03:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:03:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:33 Parameters OK 15:03:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:33 Set A/D data flow result=40 15:03:33 Set A/D channel type result=40 15:03:33 Set A/D encoding result=40 15:03:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:33 Set channel filter=0.000000e+000 result=40 15:03:33 Config A/D Result=40 15:03:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:33 Get A/D filter: -9.255963e+061 result=40 15:03:33 Get A/D value=-858993460 result=40 15:03:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:33 Parameters OK 15:03:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:33 Set A/D data flow result=40 15:03:33 Set A/D channel type result=40 15:03:33 Set A/D encoding result=40 15:03:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:33 Set channel filter=0.000000e+000 result=40 15:03:33 Config A/D Result=40 15:03:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:33 Get A/D filter: -9.255963e+061 result=40 15:03:33 Get A/D value=-858993460 result=40 15:03:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:03:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:03:33 Aux= 15:03:33 Message to Camera, serial 127663 queued 15:03:38 Received message from Master: op=Identify serial=127664 [UTC 2019-3-5 15:03:50] 15:04:10 Received message from Master: op=PointingHead serial=127679 15:04:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:04:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:04:10 Point started: ret=0 15:04:10 point_skyscan result=0 15:04:11 Check angles 15:04:11 SkyScan query 15:04:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:04:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:04:12 Message to Master queued w/err=0: serial=127679 error=0 15:04:17 Received message from Master: op=Filter serial=127680 15:04:17 Color wheel filter change from 0 to 0 15:04:17 FLIGetFilterPos err=0 currentPosition=0 15:04:17 FLIGetStepsRemaining err=0 RemainingSteps=0 15:04:17 Filter is already there-color wheel unchanged 15:04:17 Received message from Master: op=Shutter serial=127681 15:04:17 Shutter LASER close 15:04:17 Received message from Camera: op=State serial=127683 15:04:17 GetSingleValue result=40 Value=cccccccc 15:04:17 SkyScan query 15:04:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:04:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:18 Parameters OK 15:04:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:18 Set A/D data flow result=40 15:04:18 Set A/D channel type result=40 15:04:18 Set A/D encoding result=40 15:04:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:18 Set channel filter=0.000000e+000 result=40 15:04:18 Config A/D Result=40 15:04:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:18 Get A/D filter: -9.255963e+061 result=40 15:04:18 Get A/D value=-858993460 result=40 15:04:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:18 Parameters OK 15:04:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:18 Set A/D data flow result=40 15:04:18 Set A/D channel type result=40 15:04:18 Set A/D encoding result=40 15:04:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:18 Set channel filter=0.000000e+000 result=40 15:04:18 Config A/D Result=40 15:04:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:18 Get A/D filter: -9.255963e+061 result=40 15:04:18 Get A/D value=-858993460 result=40 15:04:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:04:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:04:18 Aux= 15:04:18 Message to Camera, serial 127683 queued 15:04:54 Received message from Master: op=PointingHead serial=127696 15:04:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:04:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:04:55 Point started: ret=0 15:04:55 point_skyscan result=0 15:04:55 Check angles 15:04:55 SkyScan query 15:04:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:04:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:04:56 Message to Master queued w/err=0: serial=127696 error=0 15:05:01 Received message from Master: op=Filter serial=127697 15:05:01 Color wheel filter change from 0 to 0 15:05:01 FLIGetFilterPos err=0 currentPosition=0 15:05:01 FLIGetStepsRemaining err=0 RemainingSteps=0 15:05:01 Filter is already there-color wheel unchanged 15:05:01 Received message from Master: op=Shutter serial=127698 15:05:01 Shutter LASER close 15:05:01 Received message from Camera: op=State serial=127700 15:05:01 GetSingleValue result=40 Value=cccccccc 15:05:01 SkyScan query 15:05:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:05:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:02 Parameters OK 15:05:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:02 Set A/D data flow result=40 15:05:02 Set A/D channel type result=40 15:05:02 Set A/D encoding result=40 15:05:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:02 Set channel filter=0.000000e+000 result=40 15:05:02 Config A/D Result=40 15:05:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:02 Get A/D filter: -9.255963e+061 result=40 15:05:02 Get A/D value=-858993460 result=40 15:05:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:02 Parameters OK 15:05:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:02 Set A/D data flow result=40 15:05:02 Set A/D channel type result=40 15:05:02 Set A/D encoding result=40 15:05:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:02 Set channel filter=0.000000e+000 result=40 15:05:02 Config A/D Result=40 15:05:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:02 Get A/D filter: -9.255963e+061 result=40 15:05:02 Get A/D value=-858993460 result=40 15:05:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:05:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:05:02 Aux= 15:05:02 Message to Camera, serial 127700 queued 15:05:39 Received message from Master: op=PointingHead serial=127713 15:05:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:05:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:05:39 Point started: ret=0 15:05:39 point_skyscan result=0 15:05:40 Check angles 15:05:40 SkyScan query 15:05:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 15:05:40 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 15:05:41 Check angles 15:05:41 SkyScan query 15:05:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 15:05:41 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 15:05:41 Check angles 15:05:41 SkyScan query 15:05:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.865<-16391 Statuses=0008 0009 15:05:42 Msec=1500 True Az=112.995 Ze=-65.865 Az status=0008 Ze status=0009 15:05:42 Check angles 15:05:42 SkyScan query 15:05:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.85<-17790 Statuses=0008 0009 15:05:43 Msec=2250 True Az=112.995 Ze=-86.85 Az status=0008 Ze status=0009 15:05:43 Check angles 15:05:43 SkyScan query 15:05:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.285<-19219 Statuses=0008 0009 15:05:43 Msec=3000 True Az=112.995 Ze=-108.285 Az status=0008 Ze status=0009 15:05:44 Check angles 15:05:44 SkyScan query 15:05:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.6<-20640 Statuses=0008 0009 15:05:44 Msec=3750 True Az=112.995 Ze=-129.6 Az status=0008 Ze status=0009 15:05:44 Check angles 15:05:44 SkyScan query 15:05:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.945<-22063 Statuses=0008 0009 15:05:45 Msec=4500 True Az=112.995 Ze=-150.945 Az status=0008 Ze status=0009 15:05:45 Check angles 15:05:45 SkyScan query 15:05:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.585<-23439 Statuses=0008 0009 15:05:46 Msec=5250 True Az=112.995 Ze=-171.585 Az status=0008 Ze status=0009 15:05:46 Check angles 15:05:46 SkyScan query 15:05:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:05:46 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:05:46 Message to Master queued w/err=0: serial=127713 error=0 15:05:51 Received message from Master: op=Filter serial=127714 15:05:51 Color wheel filter change from 0 to 0 15:05:51 FLIGetFilterPos err=0 currentPosition=0 15:05:51 FLIGetStepsRemaining err=0 RemainingSteps=0 15:05:51 Filter is already there-color wheel unchanged 15:05:52 Received message from Master: op=Shutter serial=127715 15:05:52 Shutter LASER open 15:05:52 Received message from Camera: op=State serial=127717 15:05:52 GetSingleValue result=40 Value=cccccccc 15:05:52 SkyScan query 15:05:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:05:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:52 Parameters OK 15:05:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:52 Set A/D data flow result=40 15:05:52 Set A/D channel type result=40 15:05:52 Set A/D encoding result=40 15:05:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:52 Set channel filter=0.000000e+000 result=40 15:05:52 Config A/D Result=40 15:05:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:52 Get A/D filter: -9.255963e+061 result=40 15:05:52 Get A/D value=-858993460 result=40 15:05:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:52 Parameters OK 15:05:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:52 Set A/D data flow result=40 15:05:52 Set A/D channel type result=40 15:05:52 Set A/D encoding result=40 15:05:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:52 Set channel filter=0.000000e+000 result=40 15:05:52 Config A/D Result=40 15:05:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:52 Get A/D filter: -9.255963e+061 result=40 15:05:52 Get A/D value=-858993460 result=40 15:05:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:05:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:05:52 Aux= 15:05:52 Message to Camera, serial 127717 queued 15:06:01 Received message from Master: op=Shutter serial=127727 15:06:01 Shutter LASER close 15:06:01 Received message from Master: op=PointingHead serial=127731 15:06:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:06:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:06:02 Point started: ret=0 15:06:02 point_skyscan result=0 15:06:02 Check angles 15:06:02 SkyScan query 15:06:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 15:06:03 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 15:06:03 Check angles 15:06:03 SkyScan query 15:06:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 15:06:04 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 15:06:04 Check angles 15:06:04 SkyScan query 15:06:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.58<-18772 Statuses=0008 0009 15:06:04 Msec=1500 True Az=112.995 Ze=-101.58 Az status=0008 Ze status=0009 15:06:05 Check angles 15:06:05 SkyScan query 15:06:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.61<-17374 Statuses=0008 0009 15:06:05 Msec=2250 True Az=112.995 Ze=-80.61 Az status=0008 Ze status=0009 15:06:05 Check angles 15:06:05 SkyScan query 15:06:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.67<-15978 Statuses=0008 0009 15:06:06 Msec=3000 True Az=112.995 Ze=-59.67 Az status=0008 Ze status=0009 15:06:06 Check angles 15:06:06 SkyScan query 15:06:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.7<-14580 Statuses=0008 0009 15:06:07 Msec=3750 True Az=112.995 Ze=-38.7 Az status=0008 Ze status=0009 15:06:07 Check angles 15:06:07 SkyScan query 15:06:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.76<-13184 Statuses=0008 0009 15:06:07 Msec=4500 True Az=112.995 Ze=-17.76 Az status=0008 Ze status=0009 15:06:08 Check angles 15:06:08 SkyScan query 15:06:08 SkyScan query done: ret=0 az=112.98<-7532 ze=3.225<-11785 Statuses=0008 0009 15:06:08 Msec=5250 True Az=112.98 Ze=3.225 Az status=0008 Ze status=0009 15:06:08 Check angles 15:06:08 SkyScan query 15:06:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:06:09 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:06:09 Message to Master queued w/err=0: serial=127731 error=0 15:06:14 Received message from Master: op=Filter serial=127732 15:06:14 Color wheel filter change from 0 to 0 15:06:14 FLIGetFilterPos err=0 currentPosition=0 15:06:14 FLIGetStepsRemaining err=0 RemainingSteps=0 15:06:14 Filter is already there-color wheel unchanged 15:06:14 Received message from Master: op=Shutter serial=127733 15:06:14 Shutter LASER close 15:06:14 Received message from Camera: op=State serial=127735 15:06:14 GetSingleValue result=40 Value=cccccccc 15:06:14 SkyScan query 15:06:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:06:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:15 Parameters OK 15:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:15 Set A/D data flow result=40 15:06:15 Set A/D channel type result=40 15:06:15 Set A/D encoding result=40 15:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:15 Set channel filter=0.000000e+000 result=40 15:06:15 Config A/D Result=40 15:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:15 Get A/D filter: -9.255963e+061 result=40 15:06:15 Get A/D value=-858993460 result=40 15:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:15 Parameters OK 15:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:15 Set A/D data flow result=40 15:06:15 Set A/D channel type result=40 15:06:15 Set A/D encoding result=40 15:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:15 Set channel filter=0.000000e+000 result=40 15:06:15 Config A/D Result=40 15:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:15 Get A/D filter: -9.255963e+061 result=40 15:06:15 Get A/D value=-858993460 result=40 15:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:06:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:06:15 Aux= 15:06:15 Message to Camera, serial 127735 queued 15:06:52 Received message from Master: op=PointingHead serial=127748 15:06:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:06:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:06:52 Point started: ret=0 15:06:52 point_skyscan result=0 15:06:53 Check angles 15:06:53 SkyScan query 15:06:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:06:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:06:53 Message to Master queued w/err=0: serial=127748 error=0 15:06:58 Received message from Master: op=Filter serial=127749 15:06:58 Color wheel filter change from 0 to 0 15:06:58 FLIGetFilterPos err=0 currentPosition=0 15:06:58 FLIGetStepsRemaining err=0 RemainingSteps=0 15:06:58 Filter is already there-color wheel unchanged 15:06:59 Received message from Master: op=Shutter serial=127750 15:06:59 Shutter LASER close 15:06:59 Received message from Camera: op=State serial=127752 15:06:59 GetSingleValue result=40 Value=cccccccc 15:06:59 SkyScan query 15:06:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:06:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:59 Parameters OK 15:06:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:59 Set A/D data flow result=40 15:06:59 Set A/D channel type result=40 15:06:59 Set A/D encoding result=40 15:06:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:59 Set channel filter=0.000000e+000 result=40 15:06:59 Config A/D Result=40 15:06:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:59 Get A/D filter: -9.255963e+061 result=40 15:06:59 Get A/D value=-858993460 result=40 15:06:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:59 Parameters OK 15:06:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:59 Set A/D data flow result=40 15:06:59 Set A/D channel type result=40 15:06:59 Set A/D encoding result=40 15:06:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:59 Set channel filter=0.000000e+000 result=40 15:06:59 Config A/D Result=40 15:06:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:59 Get A/D filter: -9.255963e+061 result=40 15:06:59 Get A/D value=-858993460 result=40 15:06:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:06:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:06:59 Aux= 15:06:59 Message to Camera, serial 127752 queued 15:07:36 Received message from Master: op=PointingHead serial=127765 15:07:36 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 15:07:36 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 15:07:36 Point started: ret=0 15:07:36 point_skyscan result=0 15:07:37 Check angles 15:07:37 SkyScan query 15:07:38 SkyScan query done: ret=0 az=136.185<-9079 ze=-6.51<-12434 Statuses=0009 0008 15:07:38 Msec=0 True Az=136.185 Ze=-6.51 Az status=0009 Ze status=0008 15:07:38 Check angles 15:07:38 SkyScan query 15:07:38 SkyScan query done: ret=0 az=154.005<-10267 ze=-6.51<-12434 Statuses=0009 0008 15:07:38 Msec=750 True Az=154.005 Ze=-6.51 Az status=0009 Ze status=0008 15:07:39 Check angles 15:07:39 SkyScan query 15:07:39 SkyScan query done: ret=0 az=171.525<-11435 ze=-6.495<-12433 Statuses=0009 0008 15:07:39 Msec=1500 True Az=171.525 Ze=-6.495 Az status=0009 Ze status=0008 15:07:39 Check angles 15:07:39 SkyScan query 15:07:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:07:40 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 15:07:40 Message to Master queued w/err=0: serial=127765 error=0 15:07:45 Received message from Master: op=Filter serial=127766 15:07:45 Color wheel filter change from 0 to 0 15:07:45 FLIGetFilterPos err=0 currentPosition=0 15:07:45 FLIGetStepsRemaining err=0 RemainingSteps=0 15:07:45 Filter is already there-color wheel unchanged 15:07:45 Received message from Master: op=Shutter serial=127767 15:07:45 Shutter LASER close 15:07:45 Received message from Camera: op=State serial=127769 15:07:45 GetSingleValue result=40 Value=cccccccc 15:07:45 SkyScan query 15:07:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:07:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:46 Parameters OK 15:07:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:46 Set A/D data flow result=40 15:07:46 Set A/D channel type result=40 15:07:46 Set A/D encoding result=40 15:07:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:46 Set channel filter=0.000000e+000 result=40 15:07:46 Config A/D Result=40 15:07:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:46 Get A/D filter: -9.255963e+061 result=40 15:07:46 Get A/D value=-858993460 result=40 15:07:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:46 Parameters OK 15:07:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:46 Set A/D data flow result=40 15:07:46 Set A/D channel type result=40 15:07:46 Set A/D encoding result=40 15:07:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:46 Set channel filter=0.000000e+000 result=40 15:07:46 Config A/D Result=40 15:07:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:46 Get A/D filter: -9.255963e+061 result=40 15:07:46 Get A/D value=-858993460 result=40 15:07:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:07:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:07:46 Aux= 15:07:46 Message to Camera, serial 127769 queued 15:08:22 Received message from Master: op=PointingHead serial=127781 15:08:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:08:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:08:22 Point started: ret=0 15:08:22 point_skyscan result=0 15:08:23 Check angles 15:08:23 SkyScan query 15:08:23 SkyScan query done: ret=0 az=152.85<-10190 ze=6.51<-11566 Statuses=0009 0008 15:08:23 Msec=0 True Az=152.85 Ze=6.51 Az status=0009 Ze status=0008 15:08:24 Check angles 15:08:24 SkyScan query 15:08:24 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 15:08:24 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 15:08:24 Check angles 15:08:24 SkyScan query 15:08:25 SkyScan query done: ret=0 az=117.285<-7819 ze=6.495<-11567 Statuses=0009 0008 15:08:25 Msec=1500 True Az=117.285 Ze=6.495 Az status=0009 Ze status=0008 15:08:25 Check angles 15:08:25 SkyScan query 15:08:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:08:26 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:08:26 Message to Master queued w/err=0: serial=127781 error=0 15:08:31 Received message from Master: op=Filter serial=127782 15:08:31 Color wheel filter change from 0 to 0 15:08:31 FLIGetFilterPos err=0 currentPosition=0 15:08:31 FLIGetStepsRemaining err=0 RemainingSteps=0 15:08:31 Filter is already there-color wheel unchanged 15:08:31 Received message from Master: op=Shutter serial=127783 15:08:31 Shutter LASER close 15:08:31 Received message from Camera: op=State serial=127785 15:08:31 GetSingleValue result=40 Value=cccccccc 15:08:31 SkyScan query 15:08:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:08:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:31 Parameters OK 15:08:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:31 Set A/D data flow result=40 15:08:31 Set A/D channel type result=40 15:08:31 Set A/D encoding result=40 15:08:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:31 Set channel filter=0.000000e+000 result=40 15:08:31 Config A/D Result=40 15:08:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:31 Get A/D filter: -9.255963e+061 result=40 15:08:31 Get A/D value=-858993460 result=40 15:08:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:31 Parameters OK 15:08:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:31 Set A/D data flow result=40 15:08:31 Set A/D channel type result=40 15:08:31 Set A/D encoding result=40 15:08:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:31 Set channel filter=0.000000e+000 result=40 15:08:31 Config A/D Result=40 15:08:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:31 Get A/D filter: -9.255963e+061 result=40 15:08:31 Get A/D value=-858993460 result=40 15:08:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:08:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:08:31 Aux= 15:08:31 Message to Camera, serial 127785 queued 15:09:08 Received message from Master: op=PointingHead serial=127798 15:09:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:09:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:09:09 Point started: ret=0 15:09:09 point_skyscan result=0 15:09:09 Check angles 15:09:09 SkyScan query 15:09:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 15:09:10 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 15:09:10 Check angles 15:09:10 SkyScan query 15:09:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.1<-14940 Statuses=0008 0009 15:09:11 Msec=750 True Az=112.995 Ze=-44.1 Az status=0008 Ze status=0009 15:09:11 Check angles 15:09:11 SkyScan query 15:09:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.01<-16334 Statuses=0008 0009 15:09:11 Msec=1500 True Az=112.995 Ze=-65.01 Az status=0008 Ze status=0009 15:09:12 Check angles 15:09:12 SkyScan query 15:09:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.95<-17730 Statuses=0008 0009 15:09:12 Msec=2250 True Az=112.995 Ze=-85.95 Az status=0008 Ze status=0009 15:09:12 Check angles 15:09:12 SkyScan query 15:09:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.875<-19125 Statuses=0008 0009 15:09:13 Msec=3000 True Az=112.995 Ze=-106.875 Az status=0008 Ze status=0009 15:09:13 Check angles 15:09:13 SkyScan query 15:09:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.845<-20523 Statuses=0008 0009 15:09:14 Msec=3750 True Az=112.995 Ze=-127.845 Az status=0008 Ze status=0009 15:09:14 Check angles 15:09:14 SkyScan query 15:09:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.8<-21920 Statuses=0008 0009 15:09:14 Msec=4500 True Az=112.995 Ze=-148.8 Az status=0008 Ze status=0009 15:09:15 Check angles 15:09:15 SkyScan query 15:09:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.74<-23316 Statuses=0008 0009 15:09:15 Msec=5250 True Az=112.995 Ze=-169.74 Az status=0008 Ze status=0009 15:09:15 Check angles 15:09:15 SkyScan query 15:09:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:09:16 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:09:16 Message to Master queued w/err=0: serial=127798 error=0 15:09:21 Received message from Master: op=Filter serial=127799 15:09:21 Color wheel filter change from 0 to 0 15:09:21 FLIGetFilterPos err=0 currentPosition=0 15:09:21 FLIGetStepsRemaining err=0 RemainingSteps=0 15:09:21 Filter is already there-color wheel unchanged 15:09:21 Received message from Master: op=Shutter serial=127800 15:09:21 Shutter LASER open 15:09:21 Received message from Camera: op=State serial=127802 15:09:21 GetSingleValue result=40 Value=cccccccc 15:09:21 SkyScan query 15:09:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:09:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:22 Parameters OK 15:09:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:22 Set A/D data flow result=40 15:09:22 Set A/D channel type result=40 15:09:22 Set A/D encoding result=40 15:09:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:22 Set channel filter=0.000000e+000 result=40 15:09:22 Config A/D Result=40 15:09:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:22 Get A/D filter: -9.255963e+061 result=40 15:09:22 Get A/D value=-858993460 result=40 15:09:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:22 Parameters OK 15:09:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:22 Set A/D data flow result=40 15:09:22 Set A/D channel type result=40 15:09:22 Set A/D encoding result=40 15:09:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:22 Set channel filter=0.000000e+000 result=40 15:09:22 Config A/D Result=40 15:09:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:22 Get A/D filter: -9.255963e+061 result=40 15:09:22 Get A/D value=-858993460 result=40 15:09:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:09:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:09:22 Aux= 15:09:22 Message to Camera, serial 127802 queued 15:09:30 Received message from Master: op=Shutter serial=127812 15:09:30 Shutter LASER close 15:09:31 Received message from Master: op=PointingHead serial=127816 15:09:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:09:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:09:31 Point started: ret=0 15:09:31 point_skyscan result=0 15:09:32 Check angles 15:09:32 SkyScan query 15:09:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.92<-21528 Statuses=0008 0009 15:09:32 Msec=0 True Az=112.995 Ze=-142.92 Az status=0008 Ze status=0009 15:09:33 Check angles 15:09:33 SkyScan query 15:09:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.95<-20130 Statuses=0008 0009 15:09:33 Msec=750 True Az=112.995 Ze=-121.95 Az status=0008 Ze status=0009 15:09:33 Check angles 15:09:33 SkyScan query 15:09:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.01<-18734 Statuses=0008 0009 15:09:34 Msec=1500 True Az=112.995 Ze=-101.01 Az status=0008 Ze status=0009 15:09:34 Check angles 15:09:34 SkyScan query 15:09:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.04<-17336 Statuses=0008 0009 15:09:35 Msec=2250 True Az=112.995 Ze=-80.04 Az status=0008 Ze status=0009 15:09:35 Check angles 15:09:35 SkyScan query 15:09:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.07<-15938 Statuses=0008 0009 15:09:35 Msec=3000 True Az=112.995 Ze=-59.07 Az status=0008 Ze status=0009 15:09:36 Check angles 15:09:36 SkyScan query 15:09:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.04<-14536 Statuses=0008 0009 15:09:36 Msec=3750 True Az=112.995 Ze=-38.04 Az status=0008 Ze status=0009 15:09:36 Check angles 15:09:36 SkyScan query 15:09:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.1<-13140 Statuses=0008 0009 15:09:37 Msec=4500 True Az=112.995 Ze=-17.1 Az status=0008 Ze status=0009 15:09:37 Check angles 15:09:37 SkyScan query 15:09:38 SkyScan query done: ret=0 az=112.995<-7533 ze=3.855<-11743 Statuses=0008 0009 15:09:38 Msec=5250 True Az=112.995 Ze=3.855 Az status=0008 Ze status=0009 15:09:38 Check angles 15:09:38 SkyScan query 15:09:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:09:38 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:09:38 Message to Master queued w/err=0: serial=127816 error=0 15:09:43 Received message from Master: op=Filter serial=127817 15:09:43 Color wheel filter change from 0 to 0 15:09:43 FLIGetFilterPos err=0 currentPosition=0 15:09:43 FLIGetStepsRemaining err=0 RemainingSteps=0 15:09:43 Filter is already there-color wheel unchanged 15:09:44 Received message from Master: op=Shutter serial=127818 15:09:44 Shutter LASER close 15:09:44 Received message from Camera: op=State serial=127820 15:09:44 GetSingleValue result=40 Value=cccccccc 15:09:44 SkyScan query 15:09:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:09:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:44 Parameters OK 15:09:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:44 Set A/D data flow result=40 15:09:44 Set A/D channel type result=40 15:09:44 Set A/D encoding result=40 15:09:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:44 Set channel filter=0.000000e+000 result=40 15:09:44 Config A/D Result=40 15:09:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:44 Get A/D filter: -9.255963e+061 result=40 15:09:44 Get A/D value=-858993460 result=40 15:09:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:44 Parameters OK 15:09:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:44 Set A/D data flow result=40 15:09:44 Set A/D channel type result=40 15:09:44 Set A/D encoding result=40 15:09:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:44 Set channel filter=0.000000e+000 result=40 15:09:44 Config A/D Result=40 15:09:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:44 Get A/D filter: -9.255963e+061 result=40 15:09:44 Get A/D value=-858993460 result=40 15:09:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:09:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:09:44 Aux= 15:09:44 Message to Camera, serial 127820 queued 15:10:21 Received message from Master: op=PointingHead serial=127833 15:10:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:10:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:10:21 Point started: ret=0 15:10:21 point_skyscan result=0 15:10:22 Check angles 15:10:22 SkyScan query 15:10:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:10:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:10:23 Message to Master queued w/err=0: serial=127833 error=0 15:10:28 Received message from Master: op=Filter serial=127834 15:10:28 Color wheel filter change from 0 to 0 15:10:28 FLIGetFilterPos err=0 currentPosition=0 15:10:28 FLIGetStepsRemaining err=0 RemainingSteps=0 15:10:28 Filter is already there-color wheel unchanged 15:10:28 Received message from Master: op=Shutter serial=127835 15:10:28 Shutter LASER close 15:10:28 Received message from Camera: op=State serial=127837 15:10:28 GetSingleValue result=40 Value=cccccccc 15:10:28 SkyScan query 15:10:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:10:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:29 Parameters OK 15:10:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:29 Set A/D data flow result=40 15:10:29 Set A/D channel type result=40 15:10:29 Set A/D encoding result=40 15:10:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:29 Set channel filter=0.000000e+000 result=40 15:10:29 Config A/D Result=40 15:10:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:29 Get A/D filter: -9.255963e+061 result=40 15:10:29 Get A/D value=-858993460 result=40 15:10:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:29 Parameters OK 15:10:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:29 Set A/D data flow result=40 15:10:29 Set A/D channel type result=40 15:10:29 Set A/D encoding result=40 15:10:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:29 Set channel filter=0.000000e+000 result=40 15:10:29 Config A/D Result=40 15:10:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:29 Get A/D filter: -9.255963e+061 result=40 15:10:29 Get A/D value=-858993460 result=40 15:10:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:10:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:10:29 Aux= 15:10:29 Message to Camera, serial 127837 queued 15:11:05 Received message from Master: op=PointingHead serial=127850 15:11:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:11:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:11:06 Point started: ret=0 15:11:06 point_skyscan result=0 15:11:07 Check angles 15:11:07 SkyScan query 15:11:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:11:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:11:07 Message to Master queued w/err=0: serial=127850 error=0 15:11:12 Received message from Master: op=Filter serial=127851 15:11:12 Color wheel filter change from 0 to 0 15:11:12 FLIGetFilterPos err=0 currentPosition=0 15:11:12 FLIGetStepsRemaining err=0 RemainingSteps=0 15:11:12 Filter is already there-color wheel unchanged 15:11:12 Received message from Master: op=Shutter serial=127852 15:11:12 Shutter LASER close 15:11:12 Received message from Camera: op=State serial=127854 15:11:12 GetSingleValue result=40 Value=cccccccc 15:11:12 SkyScan query 15:11:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:11:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:13 Parameters OK 15:11:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:13 Set A/D data flow result=40 15:11:13 Set A/D channel type result=40 15:11:13 Set A/D encoding result=40 15:11:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:13 Set channel filter=0.000000e+000 result=40 15:11:13 Config A/D Result=40 15:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:13 Get A/D filter: -9.255963e+061 result=40 15:11:13 Get A/D value=-858993460 result=40 15:11:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:13 Parameters OK 15:11:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:13 Set A/D data flow result=40 15:11:13 Set A/D channel type result=40 15:11:13 Set A/D encoding result=40 15:11:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:13 Set channel filter=0.000000e+000 result=40 15:11:13 Config A/D Result=40 15:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:13 Get A/D filter: -9.255963e+061 result=40 15:11:13 Get A/D value=-858993460 result=40 15:11:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:11:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:11:13 Aux= 15:11:13 Message to Camera, serial 127854 queued 15:11:50 Received message from Master: op=PointingHead serial=127867 15:11:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:11:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:11:50 Point started: ret=0 15:11:50 point_skyscan result=0 15:11:51 Check angles 15:11:51 SkyScan query 15:11:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:11:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:11:51 Message to Master queued w/err=0: serial=127867 error=0 15:11:56 Received message from Master: op=Filter serial=127868 15:11:56 Color wheel filter change from 0 to 0 15:11:56 FLIGetFilterPos err=0 currentPosition=0 15:11:56 FLIGetStepsRemaining err=0 RemainingSteps=0 15:11:56 Filter is already there-color wheel unchanged 15:11:57 Received message from Master: op=Shutter serial=127869 15:11:57 Shutter LASER close 15:11:57 Received message from Camera: op=State serial=127871 15:11:57 GetSingleValue result=40 Value=cccccccc 15:11:57 SkyScan query 15:11:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:11:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:57 Parameters OK 15:11:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:57 Set A/D data flow result=40 15:11:57 Set A/D channel type result=40 15:11:57 Set A/D encoding result=40 15:11:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:57 Set channel filter=0.000000e+000 result=40 15:11:57 Config A/D Result=40 15:11:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:57 Get A/D filter: -9.255963e+061 result=40 15:11:57 Get A/D value=-858993460 result=40 15:11:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:57 Parameters OK 15:11:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:57 Set A/D data flow result=40 15:11:57 Set A/D channel type result=40 15:11:57 Set A/D encoding result=40 15:11:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:57 Set channel filter=0.000000e+000 result=40 15:11:57 Config A/D Result=40 15:11:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:57 Get A/D filter: -9.255963e+061 result=40 15:11:57 Get A/D value=-858993460 result=40 15:11:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:11:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:11:57 Aux= 15:11:57 Message to Camera, serial 127871 queued 15:12:34 Received message from Master: op=PointingHead serial=127884 15:12:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:12:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:12:34 Point started: ret=0 15:12:34 point_skyscan result=0 15:12:35 Check angles 15:12:35 SkyScan query 15:12:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 15:12:36 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 15:12:36 Check angles 15:12:36 SkyScan query 15:12:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.19<-14946 Statuses=0008 0009 15:12:36 Msec=750 True Az=112.995 Ze=-44.19 Az status=0008 Ze status=0009 15:12:37 Check angles 15:12:37 SkyScan query 15:12:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.1<-16340 Statuses=0008 0009 15:12:37 Msec=1500 True Az=112.995 Ze=-65.1 Az status=0008 Ze status=0009 15:12:37 Check angles 15:12:37 SkyScan query 15:12:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.04<-17736 Statuses=0008 0009 15:12:38 Msec=2250 True Az=112.995 Ze=-86.04 Az status=0008 Ze status=0009 15:12:38 Check angles 15:12:38 SkyScan query 15:12:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.98<-19132 Statuses=0008 0009 15:12:39 Msec=3000 True Az=112.995 Ze=-106.98 Az status=0008 Ze status=0009 15:12:39 Check angles 15:12:39 SkyScan query 15:12:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.95<-20530 Statuses=0008 0009 15:12:39 Msec=3750 True Az=112.995 Ze=-127.95 Az status=0008 Ze status=0009 15:12:40 Check angles 15:12:40 SkyScan query 15:12:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.905<-21927 Statuses=0008 0009 15:12:40 Msec=4500 True Az=112.995 Ze=-148.905 Az status=0008 Ze status=0009 15:12:40 Check angles 15:12:40 SkyScan query 15:12:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.845<-23323 Statuses=0008 0009 15:12:41 Msec=5250 True Az=112.995 Ze=-169.845 Az status=0008 Ze status=0009 15:12:41 Check angles 15:12:41 SkyScan query 15:12:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:12:42 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:12:42 Message to Master queued w/err=0: serial=127884 error=0 15:12:47 Received message from Master: op=Filter serial=127885 15:12:47 Color wheel filter change from 0 to 0 15:12:47 FLIGetFilterPos err=0 currentPosition=0 15:12:47 FLIGetStepsRemaining err=0 RemainingSteps=0 15:12:47 Filter is already there-color wheel unchanged 15:12:47 Received message from Master: op=Shutter serial=127886 15:12:47 Shutter LASER open 15:12:47 Received message from Camera: op=State serial=127888 15:12:47 GetSingleValue result=40 Value=cccccccc 15:12:47 SkyScan query 15:12:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:12:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:48 Parameters OK 15:12:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:48 Set A/D data flow result=40 15:12:48 Set A/D channel type result=40 15:12:48 Set A/D encoding result=40 15:12:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:48 Set channel filter=0.000000e+000 result=40 15:12:48 Config A/D Result=40 15:12:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:48 Get A/D filter: -9.255963e+061 result=40 15:12:48 Get A/D value=-858993460 result=40 15:12:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:48 Parameters OK 15:12:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:48 Set A/D data flow result=40 15:12:48 Set A/D channel type result=40 15:12:48 Set A/D encoding result=40 15:12:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:48 Set channel filter=0.000000e+000 result=40 15:12:48 Config A/D Result=40 15:12:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:48 Get A/D filter: -9.255963e+061 result=40 15:12:48 Get A/D value=-858993460 result=40 15:12:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:12:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:12:48 Aux= 15:12:48 Message to Camera, serial 127888 queued 15:12:55 Received message from Master: op=Shutter serial=127897 15:12:55 Shutter LASER close 15:12:56 Received message from Master: op=PointingHead serial=127901 15:12:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:12:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:12:56 Point started: ret=0 15:12:56 point_skyscan result=0 15:12:57 Check angles 15:12:57 SkyScan query 15:12:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 15:12:57 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 15:12:58 Check angles 15:12:58 SkyScan query 15:12:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 15:12:58 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 15:12:58 Check angles 15:12:58 SkyScan query 15:12:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.16<-18744 Statuses=0008 0009 15:12:59 Msec=1500 True Az=112.995 Ze=-101.16 Az status=0008 Ze status=0009 15:12:59 Check angles 15:12:59 SkyScan query 15:13:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.175<-17345 Statuses=0008 0009 15:13:00 Msec=2250 True Az=112.995 Ze=-80.175 Az status=0008 Ze status=0009 15:13:00 Check angles 15:13:00 SkyScan query 15:13:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 15:13:00 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 15:13:01 Check angles 15:13:01 SkyScan query 15:13:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.74<-14516 Statuses=0008 0009 15:13:01 Msec=3750 True Az=112.995 Ze=-37.74 Az status=0008 Ze status=0009 15:13:01 Check angles 15:13:01 SkyScan query 15:13:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.785<-13119 Statuses=0008 0009 15:13:02 Msec=4500 True Az=112.995 Ze=-16.785 Az status=0008 Ze status=0009 15:13:02 Check angles 15:13:02 SkyScan query 15:13:03 SkyScan query done: ret=0 az=113.01<-7534 ze=4.125<-11725 Statuses=0008 0009 15:13:03 Msec=5250 True Az=113.01 Ze=4.125 Az status=0008 Ze status=0009 15:13:03 Check angles 15:13:03 SkyScan query 15:13:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:13:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:13:03 Message to Master queued w/err=0: serial=127901 error=0 15:13:08 Received message from Master: op=Filter serial=127902 15:13:08 Color wheel filter change from 0 to 0 15:13:08 FLIGetFilterPos err=0 currentPosition=0 15:13:08 FLIGetStepsRemaining err=0 RemainingSteps=0 15:13:08 Filter is already there-color wheel unchanged 15:13:09 Received message from Master: op=Shutter serial=127903 15:13:09 Shutter LASER close 15:13:09 Received message from Camera: op=State serial=127905 15:13:09 GetSingleValue result=40 Value=cccccccc 15:13:09 SkyScan query 15:13:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:13:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:09 Parameters OK 15:13:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:09 Set A/D data flow result=40 15:13:09 Set A/D channel type result=40 15:13:09 Set A/D encoding result=40 15:13:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:09 Set channel filter=0.000000e+000 result=40 15:13:09 Config A/D Result=40 15:13:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:09 Get A/D filter: -9.255963e+061 result=40 15:13:09 Get A/D value=-858993460 result=40 15:13:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:09 Parameters OK 15:13:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:09 Set A/D data flow result=40 15:13:09 Set A/D channel type result=40 15:13:09 Set A/D encoding result=40 15:13:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:09 Set channel filter=0.000000e+000 result=40 15:13:09 Config A/D Result=40 15:13:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:09 Get A/D filter: -9.255963e+061 result=40 15:13:09 Get A/D value=-858993460 result=40 15:13:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:13:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:13:09 Aux= 15:13:09 Message to Camera, serial 127905 queued 15:13:45 Received message from Master: op=PointingHead serial=127917 15:13:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:13:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:13:46 Point started: ret=0 15:13:46 point_skyscan result=0 15:13:46 Check angles 15:13:46 SkyScan query 15:13:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:13:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:13:47 Message to Master queued w/err=0: serial=127917 error=0 15:13:52 Received message from Master: op=Filter serial=127918 15:13:52 Color wheel filter change from 0 to 0 15:13:52 FLIGetFilterPos err=0 currentPosition=0 15:13:52 FLIGetStepsRemaining err=0 RemainingSteps=0 15:13:52 Filter is already there-color wheel unchanged 15:13:52 Received message from Master: op=Shutter serial=127919 15:13:52 Shutter LASER close 15:13:52 Received message from Camera: op=State serial=127921 15:13:52 GetSingleValue result=40 Value=cccccccc 15:13:52 SkyScan query 15:13:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:13:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:53 Parameters OK 15:13:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:53 Set A/D data flow result=40 15:13:53 Set A/D channel type result=40 15:13:53 Set A/D encoding result=40 15:13:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:53 Set channel filter=0.000000e+000 result=40 15:13:53 Config A/D Result=40 15:13:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:53 Get A/D filter: -9.255963e+061 result=40 15:13:53 Get A/D value=-858993460 result=40 15:13:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:53 Parameters OK 15:13:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:53 Set A/D data flow result=40 15:13:53 Set A/D channel type result=40 15:13:53 Set A/D encoding result=40 15:13:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:53 Set channel filter=0.000000e+000 result=40 15:13:53 Config A/D Result=40 15:13:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:53 Get A/D filter: -9.255963e+061 result=40 15:13:53 Get A/D value=-858993460 result=40 15:13:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:13:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:13:53 Aux= 15:13:53 Message to Camera, serial 127921 queued 15:14:29 Received message from Master: op=PointingHead serial=127934 15:14:29 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 15:14:29 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 15:14:30 Point started: ret=0 15:14:30 point_skyscan result=0 15:14:31 Check angles 15:14:31 SkyScan query 15:14:31 SkyScan query done: ret=0 az=136.545<-9103 ze=-6.51<-12434 Statuses=0009 0008 15:14:31 Msec=0 True Az=136.545 Ze=-6.51 Az status=0009 Ze status=0008 15:14:31 Check angles 15:14:31 SkyScan query 15:14:32 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.495<-12433 Statuses=0009 0008 [UTC 2019-3-5 15:14:32] 15:14:32 Msec=750 True Az=153.93 Ze=-6.495 Az status=0009 Ze status=0008 15:14:32 Check angles 15:14:32 SkyScan query 15:14:33 SkyScan query done: ret=0 az=171.465<-11431 ze=-6.495<-12433 Statuses=0009 0008 15:14:33 Msec=1500 True Az=171.465 Ze=-6.495 Az status=0009 Ze status=0008 15:14:33 Check angles 15:14:33 SkyScan query 15:14:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:14:33 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 15:14:33 Message to Master queued w/err=0: serial=127934 error=0 15:14:38 Received message from Master: op=Filter serial=127935 15:14:38 Color wheel filter change from 0 to 0 15:14:38 FLIGetFilterPos err=0 currentPosition=0 15:14:38 FLIGetStepsRemaining err=0 RemainingSteps=0 15:14:38 Filter is already there-color wheel unchanged 15:14:39 Received message from Master: op=Shutter serial=127936 15:14:39 Shutter LASER close 15:14:39 Received message from Camera: op=State serial=127938 15:14:39 GetSingleValue result=40 Value=cccccccc 15:14:39 SkyScan query 15:14:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:14:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:39 Parameters OK 15:14:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:39 Set A/D data flow result=40 15:14:39 Set A/D channel type result=40 15:14:39 Set A/D encoding result=40 15:14:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:39 Set channel filter=0.000000e+000 result=40 15:14:39 Config A/D Result=40 15:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:39 Get A/D filter: -9.255963e+061 result=40 15:14:39 Get A/D value=-858993460 result=40 15:14:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:39 Parameters OK 15:14:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:39 Set A/D data flow result=40 15:14:39 Set A/D channel type result=40 15:14:39 Set A/D encoding result=40 15:14:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:39 Set channel filter=0.000000e+000 result=40 15:14:39 Config A/D Result=40 15:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:39 Get A/D filter: -9.255963e+061 result=40 15:14:39 Get A/D value=-858993460 result=40 15:14:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:14:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:14:39 Aux= 15:14:39 Message to Camera, serial 127938 queued 15:15:16 Received message from Master: op=PointingHead serial=127951 15:15:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:15:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:15:16 Point started: ret=0 15:15:16 point_skyscan result=0 15:15:17 Check angles 15:15:17 SkyScan query 15:15:18 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 15:15:18 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 15:15:18 Check angles 15:15:18 SkyScan query 15:15:18 SkyScan query done: ret=0 az=135.63<-9042 ze=6.495<-11567 Statuses=0009 0008 15:15:18 Msec=750 True Az=135.63 Ze=6.495 Az status=0009 Ze status=0008 15:15:19 Check angles 15:15:19 SkyScan query 15:15:19 SkyScan query done: ret=0 az=118.065<-7871 ze=6.495<-11567 Statuses=0009 0008 15:15:19 Msec=1500 True Az=118.065 Ze=6.495 Az status=0009 Ze status=0008 15:15:19 Check angles 15:15:19 SkyScan query 15:15:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:15:20 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:15:20 Message to Master queued w/err=0: serial=127951 error=0 15:15:25 Received message from Master: op=Filter serial=127952 15:15:25 Color wheel filter change from 0 to 0 15:15:25 FLIGetFilterPos err=0 currentPosition=0 15:15:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:15:25 Filter is already there-color wheel unchanged 15:15:25 Received message from Master: op=Shutter serial=127953 15:15:25 Shutter LASER close 15:15:25 Received message from Camera: op=State serial=127955 15:15:25 GetSingleValue result=40 Value=cccccccc 15:15:25 SkyScan query 15:15:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:15:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:26 Parameters OK 15:15:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:26 Set A/D data flow result=40 15:15:26 Set A/D channel type result=40 15:15:26 Set A/D encoding result=40 15:15:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:26 Set channel filter=0.000000e+000 result=40 15:15:26 Config A/D Result=40 15:15:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:26 Get A/D filter: -9.255963e+061 result=40 15:15:26 Get A/D value=-858993460 result=40 15:15:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:26 Parameters OK 15:15:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:26 Set A/D data flow result=40 15:15:26 Set A/D channel type result=40 15:15:26 Set A/D encoding result=40 15:15:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:26 Set channel filter=0.000000e+000 result=40 15:15:26 Config A/D Result=40 15:15:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:26 Get A/D filter: -9.255963e+061 result=40 15:15:26 Get A/D value=-858993460 result=40 15:15:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:15:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:15:26 Aux= 15:15:26 Message to Camera, serial 127955 queued 15:16:03 Received message from Master: op=PointingHead serial=127968 15:16:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:16:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:16:03 Point started: ret=0 15:16:03 point_skyscan result=0 15:16:04 Check angles 15:16:04 SkyScan query 15:16:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.82<-13588 Statuses=0008 0009 15:16:04 Msec=0 True Az=112.995 Ze=-23.82 Az status=0008 Ze status=0009 15:16:04 Check angles 15:16:04 SkyScan query 15:16:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.76<-14984 Statuses=0008 0009 15:16:05 Msec=750 True Az=112.995 Ze=-44.76 Az status=0008 Ze status=0009 15:16:05 Check angles 15:16:05 SkyScan query 15:16:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.73<-16382 Statuses=0008 0009 15:16:06 Msec=1500 True Az=112.995 Ze=-65.73 Az status=0008 Ze status=0009 15:16:06 Check angles 15:16:06 SkyScan query 15:16:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.18<-17812 Statuses=0008 0009 15:16:07 Msec=2250 True Az=112.995 Ze=-87.18 Az status=0008 Ze status=0009 15:16:07 Check angles 15:16:07 SkyScan query 15:16:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.135<-19209 Statuses=0008 0009 15:16:07 Msec=3000 True Az=112.995 Ze=-108.135 Az status=0008 Ze status=0009 15:16:07 Check angles 15:16:07 SkyScan query 15:16:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.06<-20604 Statuses=0008 0009 15:16:08 Msec=3750 True Az=112.995 Ze=-129.06 Az status=0008 Ze status=0009 15:16:08 Check angles 15:16:08 SkyScan query 15:16:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.015<-22001 Statuses=0008 0009 15:16:09 Msec=4500 True Az=112.995 Ze=-150.015 Az status=0008 Ze status=0009 15:16:09 Check angles 15:16:09 SkyScan query 15:16:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0008 0009 15:16:10 Msec=5250 True Az=112.995 Ze=-170.895 Az status=0008 Ze status=0009 15:16:10 Check angles 15:16:10 SkyScan query 15:16:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:16:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:16:10 Message to Master queued w/err=0: serial=127968 error=0 15:16:15 Received message from Master: op=Filter serial=127969 15:16:15 Color wheel filter change from 0 to 0 15:16:15 FLIGetFilterPos err=0 currentPosition=0 15:16:15 FLIGetStepsRemaining err=0 RemainingSteps=0 15:16:15 Filter is already there-color wheel unchanged 15:16:15 Received message from Master: op=Shutter serial=127970 15:16:15 Shutter LASER open 15:16:16 Received message from Camera: op=State serial=127972 15:16:16 GetSingleValue result=40 Value=cccccccc 15:16:16 SkyScan query 15:16:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:16:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:16 Parameters OK 15:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:16 Set A/D data flow result=40 15:16:16 Set A/D channel type result=40 15:16:16 Set A/D encoding result=40 15:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:16 Set channel filter=0.000000e+000 result=40 15:16:16 Config A/D Result=40 15:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:16 Get A/D filter: -9.255963e+061 result=40 15:16:16 Get A/D value=-858993460 result=40 15:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:16 Parameters OK 15:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:16 Set A/D data flow result=40 15:16:16 Set A/D channel type result=40 15:16:16 Set A/D encoding result=40 15:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:16 Set channel filter=0.000000e+000 result=40 15:16:16 Config A/D Result=40 15:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:16 Get A/D filter: -9.255963e+061 result=40 15:16:16 Get A/D value=-858993460 result=40 15:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:16 Aux= 15:16:16 Message to Camera, serial 127972 queued 15:16:25 Received message from Master: op=Shutter serial=127982 15:16:25 Shutter LASER close 15:16:25 Received message from Master: op=PointingHead serial=127986 15:16:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:16:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:16:25 Point started: ret=0 15:16:25 point_skyscan result=0 15:16:26 Check angles 15:16:26 SkyScan query 15:16:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.785<-21519 Statuses=0008 0009 15:16:27 Msec=0 True Az=112.995 Ze=-142.785 Az status=0008 Ze status=0009 15:16:27 Check angles 15:16:27 SkyScan query 15:16:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.8<-20120 Statuses=0008 0009 15:16:28 Msec=750 True Az=112.995 Ze=-121.8 Az status=0008 Ze status=0009 15:16:28 Check angles 15:16:28 SkyScan query 15:16:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.875<-18725 Statuses=0008 0009 15:16:28 Msec=1500 True Az=112.995 Ze=-100.875 Az status=0008 Ze status=0009 15:16:28 Check angles 15:16:28 SkyScan query 15:16:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.41<-17294 Statuses=0008 0009 15:16:29 Msec=2250 True Az=112.995 Ze=-79.41 Az status=0008 Ze status=0009 15:16:29 Check angles 15:16:29 SkyScan query 15:16:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.47<-15898 Statuses=0008 0009 15:16:30 Msec=3000 True Az=112.995 Ze=-58.47 Az status=0008 Ze status=0009 15:16:30 Check angles 15:16:30 SkyScan query 15:16:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.545<-14503 Statuses=0008 0009 15:16:31 Msec=3750 True Az=112.995 Ze=-37.545 Az status=0008 Ze status=0009 15:16:31 Check angles 15:16:31 SkyScan query 15:16:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.56<-13104 Statuses=0008 0009 15:16:31 Msec=4500 True Az=112.995 Ze=-16.56 Az status=0008 Ze status=0009 15:16:31 Check angles 15:16:31 SkyScan query 15:16:32 SkyScan query done: ret=0 az=113.01<-7534 ze=4.305<-11713 Statuses=0008 0009 15:16:32 Msec=5250 True Az=113.01 Ze=4.305 Az status=0008 Ze status=0009 15:16:32 Check angles 15:16:32 SkyScan query 15:16:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:16:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:16:33 Message to Master queued w/err=0: serial=127986 error=0 15:16:38 Received message from Master: op=Filter serial=127987 15:16:38 Color wheel filter change from 0 to 0 15:16:38 FLIGetFilterPos err=0 currentPosition=0 15:16:38 FLIGetStepsRemaining err=0 RemainingSteps=0 15:16:38 Filter is already there-color wheel unchanged 15:16:38 Received message from Master: op=Shutter serial=127988 15:16:38 Shutter LASER close 15:16:38 Received message from Camera: op=State serial=127990 15:16:38 GetSingleValue result=40 Value=cccccccc 15:16:38 SkyScan query 15:16:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:16:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:39 Parameters OK 15:16:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:39 Set A/D data flow result=40 15:16:39 Set A/D channel type result=40 15:16:39 Set A/D encoding result=40 15:16:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:39 Set channel filter=0.000000e+000 result=40 15:16:39 Config A/D Result=40 15:16:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:39 Get A/D filter: -9.255963e+061 result=40 15:16:39 Get A/D value=-858993460 result=40 15:16:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:39 Parameters OK 15:16:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:39 Set A/D data flow result=40 15:16:39 Set A/D channel type result=40 15:16:39 Set A/D encoding result=40 15:16:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:39 Set channel filter=0.000000e+000 result=40 15:16:39 Config A/D Result=40 15:16:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:39 Get A/D filter: -9.255963e+061 result=40 15:16:39 Get A/D value=-858993460 result=40 15:16:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:39 Aux= 15:16:39 Message to Camera, serial 127990 queued 15:17:16 Received message from Master: op=PointingHead serial=128003 15:17:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:17:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:17:16 Point started: ret=0 15:17:16 point_skyscan result=0 15:17:17 Check angles 15:17:17 SkyScan query 15:17:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:17:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:17:17 Message to Master queued w/err=0: serial=128003 error=0 15:17:22 Received message from Master: op=Filter serial=128004 15:17:22 Color wheel filter change from 0 to 0 15:17:22 FLIGetFilterPos err=0 currentPosition=0 15:17:22 FLIGetStepsRemaining err=0 RemainingSteps=0 15:17:22 Filter is already there-color wheel unchanged 15:17:22 Received message from Master: op=Shutter serial=128005 15:17:22 Shutter LASER close 15:17:23 Received message from Camera: op=State serial=128007 15:17:23 GetSingleValue result=40 Value=cccccccc 15:17:23 SkyScan query 15:17:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:17:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:23 Parameters OK 15:17:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:23 Set A/D data flow result=40 15:17:23 Set A/D channel type result=40 15:17:23 Set A/D encoding result=40 15:17:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:23 Set channel filter=0.000000e+000 result=40 15:17:23 Config A/D Result=40 15:17:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:23 Get A/D filter: -9.255963e+061 result=40 15:17:23 Get A/D value=-858993460 result=40 15:17:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:23 Parameters OK 15:17:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:23 Set A/D data flow result=40 15:17:23 Set A/D channel type result=40 15:17:23 Set A/D encoding result=40 15:17:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:23 Set channel filter=0.000000e+000 result=40 15:17:23 Config A/D Result=40 15:17:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:23 Get A/D filter: -9.255963e+061 result=40 15:17:23 Get A/D value=-858993460 result=40 15:17:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:17:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:17:23 Aux= 15:17:23 Message to Camera, serial 128007 queued 15:18:00 Received message from Master: op=PointingHead serial=128020 15:18:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:18:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:18:01 Point started: ret=0 15:18:01 point_skyscan result=0 15:18:01 Check angles 15:18:01 SkyScan query 15:18:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 15:18:02 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 15:18:02 Check angles 15:18:02 SkyScan query 15:18:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.28<-14952 Statuses=0008 0009 15:18:03 Msec=750 True Az=112.995 Ze=-44.28 Az status=0008 Ze status=0009 15:18:03 Check angles 15:18:03 SkyScan query 15:18:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.19<-16346 Statuses=0008 0009 15:18:04 Msec=1500 True Az=112.995 Ze=-65.19 Az status=0008 Ze status=0009 15:18:04 Check angles 15:18:04 SkyScan query 15:18:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.145<-17743 Statuses=0008 0009 15:18:04 Msec=2250 True Az=112.995 Ze=-86.145 Az status=0008 Ze status=0009 15:18:04 Check angles 15:18:04 SkyScan query 15:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.085<-19139 Statuses=0008 0009 15:18:05 Msec=3000 True Az=112.995 Ze=-107.085 Az status=0008 Ze status=0009 15:18:05 Check angles 15:18:05 SkyScan query 15:18:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.07<-20538 Statuses=0008 0009 15:18:06 Msec=3750 True Az=112.995 Ze=-128.07 Az status=0008 Ze status=0009 15:18:06 Check angles 15:18:06 SkyScan query 15:18:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.025<-21935 Statuses=0008 0009 15:18:07 Msec=4500 True Az=112.995 Ze=-149.025 Az status=0008 Ze status=0009 15:18:07 Check angles 15:18:07 SkyScan query 15:18:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.98<-23332 Statuses=0008 0009 15:18:07 Msec=5250 True Az=112.995 Ze=-169.98 Az status=0008 Ze status=0009 15:18:07 Check angles 15:18:07 SkyScan query 15:18:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:18:08 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:18:08 Message to Master queued w/err=0: serial=128020 error=0 15:18:13 Received message from Master: op=Filter serial=128021 15:18:13 Color wheel filter change from 0 to 2 15:18:13 FLIGetFilterPos err=0 currentPosition=0 15:18:13 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:16 FLISetFilterPos err=0 rqPosition=2 15:18:16 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:16 Check after 0.00 sec for filter wheel DIn/CWh=0 15:18:16 FLIGetFilterPos err=0 currentPosition=2 15:18:16 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:16 Received message from Master: op=Shutter serial=128022 15:18:16 Shutter LASER close 15:18:17 Received message from Camera: op=State serial=128024 15:18:17 GetSingleValue result=40 Value=cccccccc 15:18:17 SkyScan query 15:18:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:18:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:17 Parameters OK 15:18:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:17 Set A/D data flow result=40 15:18:17 Set A/D channel type result=40 15:18:17 Set A/D encoding result=40 15:18:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:17 Set channel filter=0.000000e+000 result=40 15:18:17 Config A/D Result=40 15:18:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:17 Get A/D filter: -9.255963e+061 result=40 15:18:17 Get A/D value=-858993460 result=40 15:18:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:17 Parameters OK 15:18:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:17 Set A/D data flow result=40 15:18:17 Set A/D channel type result=40 15:18:17 Set A/D encoding result=40 15:18:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:17 Set channel filter=0.000000e+000 result=40 15:18:17 Config A/D Result=40 15:18:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:17 Get A/D filter: -9.255963e+061 result=40 15:18:17 Get A/D value=-858993460 result=40 15:18:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:18:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:18:17 Aux= 15:18:17 Message to Camera, serial 128024 queued 15:18:23 Received message from Master: op=PointingHead serial=128035 15:18:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:18:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:18:23 Point started: ret=0 15:18:23 point_skyscan result=0 15:18:24 Check angles 15:18:24 SkyScan query 15:18:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:18:25 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 15:18:25 Message to Master queued w/err=0: serial=128035 error=0 15:18:30 Received message from Master: op=Filter serial=128036 15:18:30 Color wheel filter change from 2 to 2 15:18:30 FLIGetFilterPos err=0 currentPosition=2 15:18:30 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:30 Filter is already there-color wheel unchanged 15:18:30 Received message from Master: op=Shutter serial=128037 15:18:30 Shutter LASER close 15:18:30 Received message from Camera: op=State serial=128039 15:18:30 GetSingleValue result=40 Value=cccccccc 15:18:30 SkyScan query 15:18:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:18:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:31 Parameters OK 15:18:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:31 Set A/D data flow result=40 15:18:31 Set A/D channel type result=40 15:18:31 Set A/D encoding result=40 15:18:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:31 Set channel filter=0.000000e+000 result=40 15:18:31 Config A/D Result=40 15:18:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:31 Get A/D filter: -9.255963e+061 result=40 15:18:31 Get A/D value=-858993460 result=40 15:18:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:31 Parameters OK 15:18:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:31 Set A/D data flow result=40 15:18:31 Set A/D channel type result=40 15:18:31 Set A/D encoding result=40 15:18:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:31 Set channel filter=0.000000e+000 result=40 15:18:31 Config A/D Result=40 15:18:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:31 Get A/D filter: -9.255963e+061 result=40 15:18:31 Get A/D value=-858993460 result=40 15:18:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:18:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:18:31 Aux= 15:18:31 Message to Camera, serial 128039 queued 15:19:06 Received message from Master: op=PointingHead serial=128051 15:19:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:19:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:19:07 Point started: ret=0 15:19:07 point_skyscan result=0 15:19:07 Check angles 15:19:07 SkyScan query 15:19:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:19:08 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 15:19:08 Message to Master queued w/err=0: serial=128051 error=0 15:19:13 Received message from Master: op=Filter serial=128052 15:19:13 Color wheel filter change from 2 to 2 15:19:13 FLIGetFilterPos err=0 currentPosition=2 15:19:13 FLIGetStepsRemaining err=0 RemainingSteps=0 15:19:13 Filter is already there-color wheel unchanged 15:19:13 Received message from Master: op=Shutter serial=128053 15:19:13 Shutter LASER close 15:19:13 Received message from Camera: op=State serial=128055 15:19:13 GetSingleValue result=40 Value=cccccccc 15:19:13 SkyScan query 15:19:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:19:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:14 Parameters OK 15:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:14 Set A/D data flow result=40 15:19:14 Set A/D channel type result=40 15:19:14 Set A/D encoding result=40 15:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:14 Set channel filter=0.000000e+000 result=40 15:19:14 Config A/D Result=40 15:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:14 Get A/D filter: -9.255963e+061 result=40 15:19:14 Get A/D value=-858993460 result=40 15:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:14 Parameters OK 15:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:14 Set A/D data flow result=40 15:19:14 Set A/D channel type result=40 15:19:14 Set A/D encoding result=40 15:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:14 Set channel filter=0.000000e+000 result=40 15:19:14 Config A/D Result=40 15:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:14 Get A/D filter: -9.255963e+061 result=40 15:19:14 Get A/D value=-858993460 result=40 15:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:19:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:19:14 Aux= 15:19:14 Message to Camera, serial 128055 queued 15:19:22 Received message from Master: op=Log close serial=128069 15:19:22 Log file close 15:19:22 * END OF LOG *