[UTC 2019-3-3 15:27:12] 15:27:12 Received message from Master: op=Log open serial=92333 15:27:12 Log file open: Observatory C:\PKZPrograms\Logs\20190302 \ PKZ20190303152712_Observatory.txt 15:27:12 Previous log file: 15:27:16 Received message from Master: op=Log directory change serial=92335 15:27:16 Log file directory changed from C:\PKZPrograms\Logs\20190302 to C:\PKZPrograms\Logs\20190303 15:27:16 Log file name is PKZ20190303152716_Observatory.txt 15:33:38 Received message from Master: op=Identify serial=92343 15:43:38 No messages received for 10 min. 4454 sent since last one of these. 15:43:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 15:43:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 15:43:38 MsgArea S: [UTC 2019-3-3 15:43:50] 15:53:38 No messages received for 10 min. 0 sent since last one of these. 15:53:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 15:53:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 15:53:38 MsgArea S: 16:03:38 No messages received for 10 min. 0 sent since last one of these. 16:03:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 16:03:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:03:38 MsgArea S: [UTC 2019-3-3 16:03:50] 16:13:38 No messages received for 10 min. 0 sent since last one of these. 16:13:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 16:13:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:13:38 MsgArea S: 16:23:38 No messages received for 10 min. 0 sent since last one of these. 16:23:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 16:23:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:23:38 MsgArea S: [UTC 2019-3-3 16:23:50] 16:33:38 No messages received for 10 min. 0 sent since last one of these. 16:33:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 16:33:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:33:38 MsgArea S: 16:43:38 No messages received for 10 min. 0 sent since last one of these. 16:43:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 16:43:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:43:38 MsgArea S: [UTC 2019-3-3 16:43:50] 16:53:38 No messages received for 10 min. 0 sent since last one of these. 16:53:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 16:53:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 16:53:38 MsgArea S: 17:03:38 No messages received for 10 min. 0 sent since last one of these. 17:03:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 17:03:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:03:38 MsgArea S: [UTC 2019-3-3 17:03:50] 17:13:38 No messages received for 10 min. 0 sent since last one of these. 17:13:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 17:13:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:13:38 MsgArea S: 17:23:38 No messages received for 10 min. 0 sent since last one of these. 17:23:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 17:23:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:23:38 MsgArea S: [UTC 2019-3-3 17:23:50] 17:33:38 No messages received for 10 min. 0 sent since last one of these. 17:33:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 17:33:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:33:38 MsgArea S: 17:43:38 No messages received for 10 min. 0 sent since last one of these. 17:43:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 17:43:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:43:38 MsgArea S: [UTC 2019-3-3 17:43:50] 17:53:38 No messages received for 10 min. 0 sent since last one of these. 17:53:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 17:53:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 17:53:38 MsgArea S: 18:03:38 No messages received for 10 min. 0 sent since last one of these. 18:03:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 18:03:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:03:38 MsgArea S: [UTC 2019-3-3 18:03:50] 18:13:38 No messages received for 10 min. 0 sent since last one of these. 18:13:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 18:13:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:13:38 MsgArea S: 18:23:38 No messages received for 10 min. 0 sent since last one of these. 18:23:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 18:23:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:23:38 MsgArea S: [UTC 2019-3-3 18:23:50] 18:33:38 No messages received for 10 min. 0 sent since last one of these. 18:33:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 18:33:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:33:38 MsgArea S: 18:43:38 No messages received for 10 min. 0 sent since last one of these. 18:43:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 18:43:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:43:38 MsgArea S: [UTC 2019-3-3 18:43:50] 18:53:38 No messages received for 10 min. 0 sent since last one of these. 18:53:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 18:53:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 18:53:38 MsgArea S: 19:03:38 No messages received for 10 min. 0 sent since last one of these. 19:03:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 19:03:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:03:38 MsgArea S: [UTC 2019-3-3 19:03:50] 19:13:38 No messages received for 10 min. 0 sent since last one of these. 19:13:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 19:13:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:13:38 MsgArea S: 19:23:38 No messages received for 10 min. 0 sent since last one of these. 19:23:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 19:23:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:23:38 MsgArea S: [UTC 2019-3-3 19:23:50] 19:33:38 No messages received for 10 min. 0 sent since last one of these. 19:33:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 19:33:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:33:38 MsgArea S: 19:43:38 No messages received for 10 min. 0 sent since last one of these. 19:43:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 19:43:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:43:38 MsgArea S: [UTC 2019-3-3 19:43:50] 19:53:38 No messages received for 10 min. 0 sent since last one of these. 19:53:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 19:53:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 19:53:38 MsgArea S: 20:03:38 No messages received for 10 min. 0 sent since last one of these. 20:03:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 20:03:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:03:38 MsgArea S: [UTC 2019-3-3 20:03:50] 20:13:38 No messages received for 10 min. 0 sent since last one of these. 20:13:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 20:13:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:13:38 MsgArea S: 20:23:38 No messages received for 10 min. 0 sent since last one of these. 20:23:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 20:23:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:23:38 MsgArea S: [UTC 2019-3-3 20:23:50] 20:33:38 No messages received for 10 min. 0 sent since last one of these. 20:33:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 20:33:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:33:38 MsgArea S: 20:43:38 No messages received for 10 min. 0 sent since last one of these. 20:43:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 20:43:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:43:38 MsgArea S: [UTC 2019-3-3 20:43:50] 20:53:38 No messages received for 10 min. 0 sent since last one of these. 20:53:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 20:53:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 20:53:38 MsgArea S: 21:03:38 No messages received for 10 min. 0 sent since last one of these. 21:03:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 21:03:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:03:38 MsgArea S: [UTC 2019-3-3 21:03:50] 21:13:38 No messages received for 10 min. 0 sent since last one of these. 21:13:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 21:13:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:13:38 MsgArea S: 21:23:38 No messages received for 10 min. 0 sent since last one of these. 21:23:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 21:23:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:23:38 MsgArea S: [UTC 2019-3-3 21:23:50] 21:33:38 No messages received for 10 min. 0 sent since last one of these. 21:33:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 21:33:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:33:38 MsgArea S: 21:43:38 No messages received for 10 min. 0 sent since last one of these. 21:43:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 21:43:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:43:38 MsgArea S: [UTC 2019-3-3 21:43:50] 21:53:38 No messages received for 10 min. 0 sent since last one of these. 21:53:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 21:53:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 21:53:38 MsgArea S: 22:03:38 No messages received for 10 min. 0 sent since last one of these. 22:03:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 22:03:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:03:38 MsgArea S: [UTC 2019-3-3 22:03:50] 22:13:38 No messages received for 10 min. 0 sent since last one of these. 22:13:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 22:13:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:13:38 MsgArea S: 22:23:38 No messages received for 10 min. 0 sent since last one of these. 22:23:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 22:23:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:23:38 MsgArea S: [UTC 2019-3-3 22:23:50] 22:33:38 No messages received for 10 min. 0 sent since last one of these. 22:33:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 22:33:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:33:38 MsgArea S: 22:43:38 No messages received for 10 min. 0 sent since last one of these. 22:43:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 22:43:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:43:38 MsgArea S: [UTC 2019-3-3 22:43:50] 22:53:38 No messages received for 10 min. 0 sent since last one of these. 22:53:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 22:53:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 22:53:38 MsgArea S: 23:03:38 No messages received for 10 min. 0 sent since last one of these. 23:03:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 23:03:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:03:38 MsgArea S: [UTC 2019-3-3 23:03:50] 23:13:38 No messages received for 10 min. 0 sent since last one of these. 23:13:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 23:13:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:13:38 MsgArea S: 23:23:38 No messages received for 10 min. 0 sent since last one of these. 23:23:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 23:23:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:23:38 MsgArea S: [UTC 2019-3-3 23:23:50] 23:33:38 No messages received for 10 min. 0 sent since last one of these. 23:33:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 23:33:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:33:38 MsgArea S: 23:43:38 No messages received for 10 min. 0 sent since last one of these. 23:43:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 23:43:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:43:38 MsgArea S: [UTC 2019-3-3 23:43:50] 23:53:38 No messages received for 10 min. 0 sent since last one of these. 23:53:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 23:53:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 23:53:38 MsgArea S: 00:03:38 No messages received for 10 min. 0 sent since last one of these. 00:03:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 00:03:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:03:38 MsgArea S: [UTC 2019-3-4 00:03:50] 00:13:38 No messages received for 10 min. 0 sent since last one of these. 00:13:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 00:13:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:13:38 MsgArea S: 00:23:38 No messages received for 10 min. 0 sent since last one of these. 00:23:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 00:23:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:23:38 MsgArea S: [UTC 2019-3-4 00:23:50] 00:33:38 No messages received for 10 min. 0 sent since last one of these. 00:33:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 00:33:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:33:38 MsgArea S: 00:43:38 No messages received for 10 min. 0 sent since last one of these. 00:43:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 00:43:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:43:38 MsgArea S: [UTC 2019-3-4 00:43:50] 00:53:38 No messages received for 10 min. 0 sent since last one of these. 00:53:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 00:53:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 00:53:38 MsgArea S: 01:03:38 No messages received for 10 min. 0 sent since last one of these. 01:03:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 01:03:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:03:38 MsgArea S: [UTC 2019-3-4 01:03:50] 01:13:38 No messages received for 10 min. 0 sent since last one of these. 01:13:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 01:13:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:13:38 MsgArea S: 01:23:38 No messages received for 10 min. 0 sent since last one of these. 01:23:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 01:23:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:23:38 MsgArea S: [UTC 2019-3-4 01:23:50] 01:33:38 No messages received for 10 min. 0 sent since last one of these. 01:33:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 01:33:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:33:38 MsgArea S: 01:43:38 No messages received for 10 min. 0 sent since last one of these. 01:43:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 01:43:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:43:38 MsgArea S: [UTC 2019-3-4 01:43:50] 01:53:38 No messages received for 10 min. 0 sent since last one of these. 01:53:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 01:53:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 01:53:38 MsgArea S: 02:03:38 No messages received for 10 min. 0 sent since last one of these. 02:03:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 02:03:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:03:38 MsgArea S: [UTC 2019-3-4 02:03:50] 02:13:38 No messages received for 10 min. 0 sent since last one of these. 02:13:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 02:13:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:13:38 MsgArea S: 02:23:38 No messages received for 10 min. 0 sent since last one of these. 02:23:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 02:23:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:23:38 MsgArea S: [UTC 2019-3-4 02:23:50] 02:33:38 No messages received for 10 min. 0 sent since last one of these. 02:33:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 02:33:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:33:38 MsgArea S: 02:43:38 No messages received for 10 min. 0 sent since last one of these. 02:43:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 02:43:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:43:38 MsgArea S: [UTC 2019-3-4 02:43:50] 02:53:38 No messages received for 10 min. 0 sent since last one of these. 02:53:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 02:53:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 02:53:38 MsgArea S: 03:03:38 No messages received for 10 min. 0 sent since last one of these. 03:03:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 03:03:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 03:03:38 MsgArea S: [UTC 2019-3-4 03:03:50] 03:13:38 No messages received for 10 min. 0 sent since last one of these. 03:13:38 MsgArea H: nextMessageSerial=92346 startMsgs=68 nextFree=44064 maxMsg=65468 03:13:38 MsgArea Q: Master=43452:43860 Camera=-1:-1 Observatory=-1:-1 Communicate=612:612 Analyze=-1:-1 03:13:38 MsgArea S: 03:21:41 Received message from Master: op=PointingHead serial=92347 03:21:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:21:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:21:42 Point started: ret=0 03:21:42 point_skyscan result=0 03:21:43 Check angles 03:21:43 SkyScan query 03:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:21:43 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:21:43 Message to Master queued w/err=0: serial=92347 error=0 03:21:48 Received message from Master: op=Filter serial=92348 03:21:48 Color wheel filter change from 2 to 2 03:21:48 FLIGetFilterPos err=0 currentPosition=2 03:21:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:21:48 Filter is already there-color wheel unchanged 03:21:48 Received message from Master: op=Shutter serial=92349 03:21:48 Shutter LASER close 03:21:50 Received message from Camera: op=State serial=92351 03:21:50 GetSingleValue result=40 Value=cccccccc 03:21:50 SkyScan query 03:21:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:21:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:50 Parameters OK 03:21:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:50 Set A/D data flow result=40 03:21:50 Set A/D channel type result=40 03:21:50 Set A/D encoding result=40 03:21:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:50 Set channel filter=0.000000e+000 result=40 03:21:50 Config A/D Result=40 03:21:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:50 Get A/D filter: -9.255963e+061 result=40 03:21:50 Get A/D value=-858993460 result=40 03:21:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:21:50 Parameters OK 03:21:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:21:50 Set A/D data flow result=40 03:21:50 Set A/D channel type result=40 03:21:50 Set A/D encoding result=40 03:21:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:21:50 Set channel filter=0.000000e+000 result=40 03:21:50 Config A/D Result=40 03:21:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:21:50 Get A/D filter: -9.255963e+061 result=40 03:21:50 Get A/D value=-858993460 result=40 03:21:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:21:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:21:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:21:50 Aux= 03:21:50 Message to Camera, serial 92351 queued 03:21:56 Received message from Master: op=PointingHead serial=92362 03:21:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:21:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:21:56 Point started: ret=0 03:21:56 point_skyscan result=0 03:21:57 Check angles 03:21:57 SkyScan query 03:21:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:21:58 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:21:58 Message to Master queued w/err=0: serial=92362 error=0 03:22:03 Received message from Master: op=Filter serial=92363 03:22:03 Color wheel filter change from 2 to 2 03:22:03 FLIGetFilterPos err=0 currentPosition=2 03:22:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:22:03 Filter is already there-color wheel unchanged 03:22:03 Received message from Master: op=Shutter serial=92364 03:22:03 Shutter LASER close 03:22:03 Received message from Camera: op=State serial=92366 03:22:03 GetSingleValue result=40 Value=cccccccc 03:22:03 SkyScan query 03:22:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:22:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:04 Parameters OK 03:22:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:04 Set A/D data flow result=40 03:22:04 Set A/D channel type result=40 03:22:04 Set A/D encoding result=40 03:22:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:04 Set channel filter=0.000000e+000 result=40 03:22:04 Config A/D Result=40 03:22:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:04 Get A/D filter: -9.255963e+061 result=40 03:22:04 Get A/D value=-858993460 result=40 03:22:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:04 Parameters OK 03:22:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:04 Set A/D data flow result=40 03:22:04 Set A/D channel type result=40 03:22:04 Set A/D encoding result=40 03:22:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:04 Set channel filter=0.000000e+000 result=40 03:22:04 Config A/D Result=40 03:22:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:04 Get A/D filter: -9.255963e+061 result=40 03:22:04 Get A/D value=-858993460 result=40 03:22:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:22:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:22:04 Aux= 03:22:04 Message to Camera, serial 92366 queued 03:22:40 Received message from Master: op=PointingHead serial=92378 03:22:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:22:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:22:40 Point started: ret=0 03:22:40 point_skyscan result=0 03:22:41 Check angles 03:22:41 SkyScan query 03:22:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:22:41 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:22:41 Message to Master queued w/err=0: serial=92378 error=0 03:22:46 Received message from Master: op=Filter serial=92379 03:22:46 Color wheel filter change from 2 to 2 03:22:46 FLIGetFilterPos err=0 currentPosition=2 03:22:46 FLIGetStepsRemaining err=0 RemainingSteps=0 03:22:46 Filter is already there-color wheel unchanged 03:22:46 Received message from Master: op=Shutter serial=92380 03:22:46 Shutter LASER open 03:22:47 Received message from Camera: op=State serial=92382 03:22:47 GetSingleValue result=40 Value=cccccccc 03:22:47 SkyScan query 03:22:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:22:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:47 Parameters OK 03:22:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:47 Set A/D data flow result=40 03:22:47 Set A/D channel type result=40 03:22:47 Set A/D encoding result=40 03:22:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:47 Set channel filter=0.000000e+000 result=40 03:22:47 Config A/D Result=40 03:22:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:47 Get A/D filter: -9.255963e+061 result=40 03:22:47 Get A/D value=-858993460 result=40 03:22:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:22:47 Parameters OK 03:22:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:22:47 Set A/D data flow result=40 03:22:47 Set A/D channel type result=40 03:22:47 Set A/D encoding result=40 03:22:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:22:47 Set channel filter=0.000000e+000 result=40 03:22:47 Config A/D Result=40 03:22:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:22:47 Get A/D filter: -9.255963e+061 result=40 03:22:47 Get A/D value=-858993460 result=40 03:22:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:22:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:22:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:22:47 Aux= 03:22:47 Message to Camera, serial 92382 queued 03:22:56 Received message from Master: op=Shutter serial=92392 03:22:56 Shutter LASER close 03:22:56 Received message from Master: op=PointingHead serial=92396 03:22:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:22:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:22:56 Point started: ret=0 03:22:56 point_skyscan result=0 03:22:57 Check angles 03:22:57 SkyScan query 03:22:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:22:58 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:22:58 Message to Master queued w/err=0: serial=92396 error=0 03:23:03 Received message from Master: op=Filter serial=92397 03:23:03 Color wheel filter change from 2 to 2 03:23:03 FLIGetFilterPos err=0 currentPosition=2 03:23:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:03 Filter is already there-color wheel unchanged 03:23:03 Received message from Master: op=Shutter serial=92398 03:23:03 Shutter LASER close 03:23:03 Received message from Camera: op=State serial=92400 03:23:03 GetSingleValue result=40 Value=cccccccc 03:23:03 SkyScan query 03:23:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:23:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:04 Parameters OK 03:23:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:04 Set A/D data flow result=40 03:23:04 Set A/D channel type result=40 03:23:04 Set A/D encoding result=40 03:23:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:04 Set channel filter=0.000000e+000 result=40 03:23:04 Config A/D Result=40 03:23:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:04 Get A/D filter: -9.255963e+061 result=40 03:23:04 Get A/D value=-858993460 result=40 03:23:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:04 Parameters OK 03:23:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:04 Set A/D data flow result=40 03:23:04 Set A/D channel type result=40 03:23:04 Set A/D encoding result=40 03:23:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:04 Set channel filter=0.000000e+000 result=40 03:23:04 Config A/D Result=40 03:23:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:04 Get A/D filter: -9.255963e+061 result=40 03:23:04 Get A/D value=-858993460 result=40 03:23:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:23:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:23:04 Aux= 03:23:04 Message to Camera, serial 92400 queued 03:23:12 Received message from Master: op=PointingHead serial=92412 03:23:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:23:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:23:12 Point started: ret=0 03:23:12 point_skyscan result=0 03:23:13 Check angles 03:23:13 SkyScan query 03:23:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.68<-21512 Statuses=0008 0009 03:23:13 Msec=0 True Az=112.995 Ze=-142.68 Az status=0008 Ze status=0009 03:23:13 Check angles 03:23:13 SkyScan query 03:23:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.16<-20144 Statuses=0008 0009 03:23:14 Msec=750 True Az=112.995 Ze=-122.16 Az status=0008 Ze status=0009 03:23:14 Check angles 03:23:14 SkyScan query 03:23:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 03:23:15 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 03:23:15 Check angles 03:23:15 SkyScan query 03:23:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.265<-17351 Statuses=0008 0009 03:23:15 Msec=2250 True Az=112.995 Ze=-80.265 Az status=0008 Ze status=0009 03:23:16 Check angles 03:23:16 SkyScan query 03:23:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.31<-15954 Statuses=0008 0009 03:23:16 Msec=3000 True Az=112.995 Ze=-59.31 Az status=0008 Ze status=0009 03:23:16 Check angles 03:23:16 SkyScan query 03:23:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.325<-14555 Statuses=0008 0009 03:23:17 Msec=3750 True Az=112.995 Ze=-38.325 Az status=0008 Ze status=0009 03:23:17 Check angles 03:23:17 SkyScan query 03:23:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.385<-13159 Statuses=0008 0009 03:23:18 Msec=4500 True Az=112.995 Ze=-17.385 Az status=0008 Ze status=0009 03:23:18 Check angles 03:23:18 SkyScan query 03:23:18 SkyScan query done: ret=0 az=112.995<-7533 ze=3.585<-11761 Statuses=0008 0009 03:23:18 Msec=5250 True Az=112.995 Ze=3.585 Az status=0008 Ze status=0009 03:23:19 Check angles 03:23:19 SkyScan query 03:23:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:23:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:23:19 Message to Master queued w/err=0: serial=92412 error=0 03:23:24 Received message from Master: op=Filter serial=92413 03:23:24 Color wheel filter change from 2 to 0 03:23:24 FLIGetFilterPos err=0 currentPosition=2 03:23:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:30 FLISetFilterPos err=0 rqPosition=0 03:23:30 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:30 Check after 0.00 sec for filter wheel DIn/CWh=0 03:23:30 FLIGetFilterPos err=0 currentPosition=0 03:23:30 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:30 Received message from Master: op=Shutter serial=92414 03:23:30 Shutter LASER close 03:23:31 Received message from Camera: op=State serial=92416 03:23:31 GetSingleValue result=40 Value=cccccccc 03:23:31 SkyScan query 03:23:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:23:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:31 Parameters OK 03:23:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:31 Set A/D data flow result=40 03:23:31 Set A/D channel type result=40 03:23:31 Set A/D encoding result=40 03:23:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:31 Set channel filter=0.000000e+000 result=40 03:23:31 Config A/D Result=40 03:23:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:31 Get A/D filter: -9.255963e+061 result=40 03:23:31 Get A/D value=-858993460 result=40 03:23:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:31 Parameters OK 03:23:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:31 Set A/D data flow result=40 03:23:31 Set A/D channel type result=40 03:23:31 Set A/D encoding result=40 03:23:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:31 Set channel filter=0.000000e+000 result=40 03:23:31 Config A/D Result=40 03:23:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:31 Get A/D filter: -9.255963e+061 result=40 03:23:31 Get A/D value=-858993460 result=40 03:23:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:23:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:23:31 Aux= 03:23:31 Message to Camera, serial 92416 queued [UTC 2019-3-4 03:23:50] 03:24:08 Received message from Master: op=PointingHead serial=92429 03:24:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:24:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:24:08 Point started: ret=0 03:24:08 point_skyscan result=0 03:24:09 Check angles 03:24:09 SkyScan query 03:24:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:24:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:24:10 Message to Master queued w/err=0: serial=92429 error=0 03:24:15 Received message from Master: op=Filter serial=92430 03:24:15 Color wheel filter change from 0 to 0 03:24:15 FLIGetFilterPos err=0 currentPosition=0 03:24:15 FLIGetStepsRemaining err=0 RemainingSteps=0 03:24:15 Filter is already there-color wheel unchanged 03:24:15 Received message from Master: op=Shutter serial=92431 03:24:15 Shutter LASER close 03:24:15 Received message from Camera: op=State serial=92433 03:24:15 GetSingleValue result=40 Value=cccccccc 03:24:15 SkyScan query 03:24:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:24:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:16 Parameters OK 03:24:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:16 Set A/D data flow result=40 03:24:16 Set A/D channel type result=40 03:24:16 Set A/D encoding result=40 03:24:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:16 Set channel filter=0.000000e+000 result=40 03:24:16 Config A/D Result=40 03:24:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:16 Get A/D filter: -9.255963e+061 result=40 03:24:16 Get A/D value=-858993460 result=40 03:24:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:16 Parameters OK 03:24:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:16 Set A/D data flow result=40 03:24:16 Set A/D channel type result=40 03:24:16 Set A/D encoding result=40 03:24:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:16 Set channel filter=0.000000e+000 result=40 03:24:16 Config A/D Result=40 03:24:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:16 Get A/D filter: -9.255963e+061 result=40 03:24:16 Get A/D value=-858993460 result=40 03:24:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:24:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:24:16 Aux= 03:24:16 Message to Camera, serial 92433 queued 03:24:52 Received message from Master: op=PointingHead serial=92446 03:24:52 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:24:52 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:24:53 Point started: ret=0 03:24:53 point_skyscan result=0 03:24:54 Check angles 03:24:54 SkyScan query 03:24:54 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 03:24:54 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 03:24:54 Check angles 03:24:54 SkyScan query 03:24:55 SkyScan query done: ret=0 az=153.765<-10251 ze=-6.495<-12433 Statuses=0009 0008 03:24:55 Msec=750 True Az=153.765 Ze=-6.495 Az status=0009 Ze status=0008 03:24:55 Check angles 03:24:55 SkyScan query 03:24:56 SkyScan query done: ret=0 az=171.57<-11438 ze=-6.495<-12433 Statuses=0009 0008 03:24:56 Msec=1500 True Az=171.57 Ze=-6.495 Az status=0009 Ze status=0008 03:24:56 Check angles 03:24:56 SkyScan query 03:24:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:24:56 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 03:24:56 Message to Master queued w/err=0: serial=92446 error=0 03:25:01 Received message from Master: op=Filter serial=92447 03:25:01 Color wheel filter change from 0 to 0 03:25:01 FLIGetFilterPos err=0 currentPosition=0 03:25:01 FLIGetStepsRemaining err=0 RemainingSteps=0 03:25:01 Filter is already there-color wheel unchanged 03:25:02 Received message from Master: op=Shutter serial=92448 03:25:02 Shutter LASER close 03:25:02 Received message from Camera: op=State serial=92450 03:25:02 GetSingleValue result=40 Value=cccccccc 03:25:02 SkyScan query 03:25:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:25:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:02 Parameters OK 03:25:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:02 Set A/D data flow result=40 03:25:02 Set A/D channel type result=40 03:25:02 Set A/D encoding result=40 03:25:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:02 Set channel filter=0.000000e+000 result=40 03:25:02 Config A/D Result=40 03:25:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:02 Get A/D filter: -9.255963e+061 result=40 03:25:02 Get A/D value=-858993460 result=40 03:25:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:02 Parameters OK 03:25:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:02 Set A/D data flow result=40 03:25:02 Set A/D channel type result=40 03:25:02 Set A/D encoding result=40 03:25:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:02 Set channel filter=0.000000e+000 result=40 03:25:02 Config A/D Result=40 03:25:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:02 Get A/D filter: -9.255963e+061 result=40 03:25:02 Get A/D value=-858993460 result=40 03:25:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:25:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:25:02 Aux= 03:25:02 Message to Camera, serial 92450 queued 03:25:39 Received message from Master: op=PointingHead serial=92463 03:25:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:25:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:25:39 Point started: ret=0 03:25:39 point_skyscan result=0 03:25:40 Check angles 03:25:40 SkyScan query 03:25:41 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 03:25:41 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 03:25:41 Check angles 03:25:41 SkyScan query 03:25:41 SkyScan query done: ret=0 az=135.03<-9002 ze=6.495<-11567 Statuses=0009 0008 03:25:41 Msec=750 True Az=135.03 Ze=6.495 Az status=0009 Ze status=0008 03:25:42 Check angles 03:25:42 SkyScan query 03:25:42 SkyScan query done: ret=0 az=117.165<-7811 ze=6.495<-11567 Statuses=0009 0008 03:25:42 Msec=1500 True Az=117.165 Ze=6.495 Az status=0009 Ze status=0008 03:25:42 Check angles 03:25:42 SkyScan query 03:25:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:25:43 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:25:43 Message to Master queued w/err=0: serial=92463 error=0 03:25:48 Received message from Master: op=Filter serial=92464 03:25:48 Color wheel filter change from 0 to 0 03:25:48 FLIGetFilterPos err=0 currentPosition=0 03:25:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:25:48 Filter is already there-color wheel unchanged 03:25:48 Received message from Master: op=Shutter serial=92465 03:25:48 Shutter LASER close 03:25:48 Received message from Camera: op=State serial=92467 03:25:48 GetSingleValue result=40 Value=cccccccc 03:25:48 SkyScan query 03:25:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:25:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:49 Parameters OK 03:25:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:49 Set A/D data flow result=40 03:25:49 Set A/D channel type result=40 03:25:49 Set A/D encoding result=40 03:25:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:49 Set channel filter=0.000000e+000 result=40 03:25:49 Config A/D Result=40 03:25:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:49 Get A/D filter: -9.255963e+061 result=40 03:25:49 Get A/D value=-858993460 result=40 03:25:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:49 Parameters OK 03:25:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:49 Set A/D data flow result=40 03:25:49 Set A/D channel type result=40 03:25:49 Set A/D encoding result=40 03:25:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:49 Set channel filter=0.000000e+000 result=40 03:25:49 Config A/D Result=40 03:25:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:49 Get A/D filter: -9.255963e+061 result=40 03:25:49 Get A/D value=-858993460 result=40 03:25:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:25:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:25:49 Aux= 03:25:49 Message to Camera, serial 92467 queued 03:26:26 Received message from Master: op=PointingHead serial=92480 03:26:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:26:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:26:26 Point started: ret=0 03:26:26 point_skyscan result=0 03:26:27 Check angles 03:26:27 SkyScan query 03:26:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 03:26:27 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 03:26:27 Check angles 03:26:27 SkyScan query 03:26:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 03:26:28 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 03:26:28 Check angles 03:26:28 SkyScan query 03:26:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.52<-16368 Statuses=0008 0009 03:26:29 Msec=1500 True Az=112.995 Ze=-65.52 Az status=0008 Ze status=0009 03:26:29 Check angles 03:26:29 SkyScan query 03:26:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 03:26:30 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 03:26:30 Check angles 03:26:30 SkyScan query 03:26:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 03:26:30 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 03:26:30 Check angles 03:26:30 SkyScan query 03:26:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.385<-20559 Statuses=0008 0009 03:26:31 Msec=3750 True Az=112.995 Ze=-128.385 Az status=0008 Ze status=0009 03:26:31 Check angles 03:26:31 SkyScan query 03:26:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.34<-21956 Statuses=0008 0009 03:26:32 Msec=4500 True Az=112.995 Ze=-149.34 Az status=0008 Ze status=0009 03:26:32 Check angles 03:26:32 SkyScan query 03:26:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.295<-23353 Statuses=0008 0009 03:26:33 Msec=5250 True Az=112.995 Ze=-170.295 Az status=0008 Ze status=0009 03:26:33 Check angles 03:26:33 SkyScan query 03:26:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:26:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:26:33 Message to Master queued w/err=0: serial=92480 error=0 03:26:38 Received message from Master: op=Filter serial=92481 03:26:38 Color wheel filter change from 0 to 0 03:26:38 FLIGetFilterPos err=0 currentPosition=0 03:26:38 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:38 Filter is already there-color wheel unchanged 03:26:38 Received message from Master: op=Shutter serial=92482 03:26:38 Shutter LASER open 03:26:39 Received message from Camera: op=State serial=92484 03:26:39 GetSingleValue result=40 Value=cccccccc 03:26:39 SkyScan query 03:26:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:26:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:39 Parameters OK 03:26:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:39 Set A/D data flow result=40 03:26:39 Set A/D channel type result=40 03:26:39 Set A/D encoding result=40 03:26:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:39 Set channel filter=0.000000e+000 result=40 03:26:39 Config A/D Result=40 03:26:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:39 Get A/D filter: -9.255963e+061 result=40 03:26:39 Get A/D value=-858993460 result=40 03:26:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:39 Parameters OK 03:26:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:39 Set A/D data flow result=40 03:26:39 Set A/D channel type result=40 03:26:39 Set A/D encoding result=40 03:26:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:39 Set channel filter=0.000000e+000 result=40 03:26:39 Config A/D Result=40 03:26:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:39 Get A/D filter: -9.255963e+061 result=40 03:26:39 Get A/D value=-858993460 result=40 03:26:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:26:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:26:39 Aux= 03:26:39 Message to Camera, serial 92484 queued 03:26:48 Received message from Master: op=Shutter serial=92494 03:26:48 Shutter LASER close 03:26:48 Received message from Master: op=PointingHead serial=92498 03:26:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:26:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:26:48 Point started: ret=0 03:26:48 point_skyscan result=0 03:26:49 Check angles 03:26:49 SkyScan query 03:26:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 03:26:50 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 03:26:50 Check angles 03:26:50 SkyScan query 03:26:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.265<-20151 Statuses=0008 0009 03:26:50 Msec=750 True Az=112.995 Ze=-122.265 Az status=0008 Ze status=0009 03:26:51 Check angles 03:26:51 SkyScan query 03:26:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.31<-18754 Statuses=0008 0009 03:26:51 Msec=1500 True Az=112.995 Ze=-101.31 Az status=0008 Ze status=0009 03:26:51 Check angles 03:26:51 SkyScan query 03:26:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.92<-17328 Statuses=0008 0009 03:26:52 Msec=2250 True Az=112.995 Ze=-79.92 Az status=0008 Ze status=0009 03:26:52 Check angles 03:26:52 SkyScan query 03:26:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.515<-15901 Statuses=0008 0009 03:26:53 Msec=3000 True Az=112.995 Ze=-58.515 Az status=0008 Ze status=0009 03:26:53 Check angles 03:26:53 SkyScan query 03:26:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.59<-14506 Statuses=0008 0009 03:26:54 Msec=3750 True Az=112.995 Ze=-37.59 Az status=0008 Ze status=0009 03:26:54 Check angles 03:26:54 SkyScan query 03:26:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.17<-13078 Statuses=0008 0009 03:26:54 Msec=4500 True Az=112.995 Ze=-16.17 Az status=0008 Ze status=0009 03:26:54 Check angles 03:26:54 SkyScan query 03:26:55 SkyScan query done: ret=0 az=112.995<-7533 ze=4.965<-11669 Statuses=0008 0009 03:26:55 Msec=5250 True Az=112.995 Ze=4.965 Az status=0008 Ze status=0009 03:26:55 Check angles 03:26:55 SkyScan query 03:26:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:26:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:26:56 Message to Master queued w/err=0: serial=92498 error=0 03:27:01 Received message from Master: op=Filter serial=92499 03:27:01 Color wheel filter change from 0 to 0 03:27:01 FLIGetFilterPos err=0 currentPosition=0 03:27:01 FLIGetStepsRemaining err=0 RemainingSteps=0 03:27:01 Filter is already there-color wheel unchanged 03:27:01 Received message from Master: op=Shutter serial=92500 03:27:01 Shutter LASER close 03:27:01 Received message from Camera: op=State serial=92502 03:27:01 GetSingleValue result=40 Value=cccccccc 03:27:01 SkyScan query 03:27:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:27:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:02 Parameters OK 03:27:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:02 Set A/D data flow result=40 03:27:02 Set A/D channel type result=40 03:27:02 Set A/D encoding result=40 03:27:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:02 Set channel filter=0.000000e+000 result=40 03:27:02 Config A/D Result=40 03:27:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:02 Get A/D filter: -9.255963e+061 result=40 03:27:02 Get A/D value=-858993460 result=40 03:27:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:02 Parameters OK 03:27:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:02 Set A/D data flow result=40 03:27:02 Set A/D channel type result=40 03:27:02 Set A/D encoding result=40 03:27:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:02 Set channel filter=0.000000e+000 result=40 03:27:02 Config A/D Result=40 03:27:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:02 Get A/D filter: -9.255963e+061 result=40 03:27:02 Get A/D value=-858993460 result=40 03:27:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:27:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:27:02 Aux= 03:27:02 Message to Camera, serial 92502 queued 03:27:38 Received message from Master: op=PointingHead serial=92514 03:27:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:27:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:27:38 Point started: ret=0 03:27:38 point_skyscan result=0 03:27:39 Check angles 03:27:39 SkyScan query 03:27:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:27:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:27:39 Message to Master queued w/err=0: serial=92514 error=0 03:27:44 Received message from Master: op=Filter serial=92515 03:27:44 Color wheel filter change from 0 to 0 03:27:44 FLIGetFilterPos err=0 currentPosition=0 03:27:44 FLIGetStepsRemaining err=0 RemainingSteps=0 03:27:44 Filter is already there-color wheel unchanged 03:27:45 Received message from Master: op=Shutter serial=92516 03:27:45 Shutter LASER close 03:27:45 Received message from Camera: op=State serial=92518 03:27:45 GetSingleValue result=40 Value=cccccccc 03:27:45 SkyScan query 03:27:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:27:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:45 Parameters OK 03:27:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:45 Set A/D data flow result=40 03:27:45 Set A/D channel type result=40 03:27:45 Set A/D encoding result=40 03:27:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:45 Set channel filter=0.000000e+000 result=40 03:27:45 Config A/D Result=40 03:27:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:45 Get A/D filter: -9.255963e+061 result=40 03:27:45 Get A/D value=-858993460 result=40 03:27:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:45 Parameters OK 03:27:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:45 Set A/D data flow result=40 03:27:45 Set A/D channel type result=40 03:27:45 Set A/D encoding result=40 03:27:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:45 Set channel filter=0.000000e+000 result=40 03:27:45 Config A/D Result=40 03:27:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:45 Get A/D filter: -9.255963e+061 result=40 03:27:45 Get A/D value=-858993460 result=40 03:27:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:27:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:27:45 Aux= 03:27:45 Message to Camera, serial 92518 queued 03:28:22 Received message from Master: op=PointingHead serial=92531 03:28:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:28:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:28:22 Point started: ret=0 03:28:22 point_skyscan result=0 03:28:23 Check angles 03:28:23 SkyScan query 03:28:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:28:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:28:24 Message to Master queued w/err=0: serial=92531 error=0 03:28:29 Received message from Master: op=Filter serial=92532 03:28:29 Color wheel filter change from 0 to 0 03:28:29 FLIGetFilterPos err=0 currentPosition=0 03:28:29 FLIGetStepsRemaining err=0 RemainingSteps=0 03:28:29 Filter is already there-color wheel unchanged 03:28:29 Received message from Master: op=Shutter serial=92533 03:28:29 Shutter LASER close 03:28:29 Received message from Camera: op=State serial=92535 03:28:29 GetSingleValue result=40 Value=cccccccc 03:28:29 SkyScan query 03:28:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:28:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:29 Parameters OK 03:28:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:29 Set A/D data flow result=40 03:28:29 Set A/D channel type result=40 03:28:29 Set A/D encoding result=40 03:28:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:29 Set channel filter=0.000000e+000 result=40 03:28:29 Config A/D Result=40 03:28:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:29 Get A/D filter: -9.255963e+061 result=40 03:28:29 Get A/D value=-858993460 result=40 03:28:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:29 Parameters OK 03:28:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:29 Set A/D data flow result=40 03:28:29 Set A/D channel type result=40 03:28:29 Set A/D encoding result=40 03:28:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:29 Set channel filter=0.000000e+000 result=40 03:28:29 Config A/D Result=40 03:28:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:29 Get A/D filter: -9.255963e+061 result=40 03:28:29 Get A/D value=-858993460 result=40 03:28:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:28:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:28:29 Aux= 03:28:29 Message to Camera, serial 92535 queued 03:29:06 Received message from Master: op=PointingHead serial=92548 03:29:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:29:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:29:07 Point started: ret=0 03:29:07 point_skyscan result=0 03:29:07 Check angles 03:29:07 SkyScan query 03:29:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:29:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:29:08 Message to Master queued w/err=0: serial=92548 error=0 03:29:13 Received message from Master: op=Filter serial=92549 03:29:13 Color wheel filter change from 0 to 0 03:29:13 FLIGetFilterPos err=0 currentPosition=0 03:29:13 FLIGetStepsRemaining err=0 RemainingSteps=0 03:29:13 Filter is already there-color wheel unchanged 03:29:13 Received message from Master: op=Shutter serial=92550 03:29:13 Shutter LASER close 03:29:13 Received message from Camera: op=State serial=92552 03:29:13 GetSingleValue result=40 Value=cccccccc 03:29:13 SkyScan query 03:29:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:29:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:14 Parameters OK 03:29:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:14 Set A/D data flow result=40 03:29:14 Set A/D channel type result=40 03:29:14 Set A/D encoding result=40 03:29:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:14 Set channel filter=0.000000e+000 result=40 03:29:14 Config A/D Result=40 03:29:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:14 Get A/D filter: -9.255963e+061 result=40 03:29:14 Get A/D value=-858993460 result=40 03:29:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:14 Parameters OK 03:29:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:14 Set A/D data flow result=40 03:29:14 Set A/D channel type result=40 03:29:14 Set A/D encoding result=40 03:29:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:14 Set channel filter=0.000000e+000 result=40 03:29:14 Config A/D Result=40 03:29:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:14 Get A/D filter: -9.255963e+061 result=40 03:29:14 Get A/D value=-858993460 result=40 03:29:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:29:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:29:14 Aux= 03:29:14 Message to Camera, serial 92552 queued 03:29:51 Received message from Master: op=PointingHead serial=92565 03:29:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:29:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:29:51 Point started: ret=0 03:29:51 point_skyscan result=0 03:29:52 Check angles 03:29:52 SkyScan query 03:29:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.61<-13574 Statuses=0008 0009 03:29:52 Msec=0 True Az=112.995 Ze=-23.61 Az status=0008 Ze status=0009 03:29:52 Check angles 03:29:52 SkyScan query 03:29:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.03<-15002 Statuses=0008 0009 03:29:53 Msec=750 True Az=112.995 Ze=-45.03 Az status=0008 Ze status=0009 03:29:53 Check angles 03:29:53 SkyScan query 03:29:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.955<-16397 Statuses=0008 0009 03:29:54 Msec=1500 True Az=112.995 Ze=-65.955 Az status=0008 Ze status=0009 03:29:54 Check angles 03:29:54 SkyScan query 03:29:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.91<-17794 Statuses=0008 0009 03:29:55 Msec=2250 True Az=112.995 Ze=-86.91 Az status=0008 Ze status=0009 03:29:55 Check angles 03:29:55 SkyScan query 03:29:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.85<-19190 Statuses=0008 0009 03:29:55 Msec=3000 True Az=112.995 Ze=-107.85 Az status=0008 Ze status=0009 03:29:55 Check angles 03:29:55 SkyScan query 03:29:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.805<-20587 Statuses=0008 0009 03:29:56 Msec=3750 True Az=112.995 Ze=-128.805 Az status=0008 Ze status=0009 03:29:56 Check angles 03:29:56 SkyScan query 03:29:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.76<-21984 Statuses=0008 0009 03:29:57 Msec=4500 True Az=112.995 Ze=-149.76 Az status=0008 Ze status=0009 03:29:57 Check angles 03:29:57 SkyScan query 03:29:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.67<-23378 Statuses=0008 0009 03:29:58 Msec=5250 True Az=112.995 Ze=-170.67 Az status=0008 Ze status=0009 03:29:58 Check angles 03:29:58 SkyScan query 03:29:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:29:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:29:58 Message to Master queued w/err=0: serial=92565 error=0 03:30:03 Received message from Master: op=Filter serial=92566 03:30:03 Color wheel filter change from 0 to 0 03:30:03 FLIGetFilterPos err=0 currentPosition=0 03:30:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:30:03 Filter is already there-color wheel unchanged 03:30:03 Received message from Master: op=Shutter serial=92567 03:30:03 Shutter LASER open 03:30:04 Received message from Camera: op=State serial=92569 03:30:04 GetSingleValue result=40 Value=cccccccc 03:30:04 SkyScan query 03:30:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:30:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:04 Parameters OK 03:30:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:04 Set A/D data flow result=40 03:30:04 Set A/D channel type result=40 03:30:04 Set A/D encoding result=40 03:30:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:04 Set channel filter=0.000000e+000 result=40 03:30:04 Config A/D Result=40 03:30:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:04 Get A/D filter: -9.255963e+061 result=40 03:30:04 Get A/D value=-858993460 result=40 03:30:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:04 Parameters OK 03:30:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:04 Set A/D data flow result=40 03:30:04 Set A/D channel type result=40 03:30:04 Set A/D encoding result=40 03:30:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:04 Set channel filter=0.000000e+000 result=40 03:30:04 Config A/D Result=40 03:30:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:04 Get A/D filter: -9.255963e+061 result=40 03:30:04 Get A/D value=-858993460 result=40 03:30:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:30:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:30:04 Aux= 03:30:04 Message to Camera, serial 92569 queued 03:30:13 Received message from Master: op=Shutter serial=92579 03:30:13 Shutter LASER close 03:30:13 Received message from Master: op=PointingHead serial=92583 03:30:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:30:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:30:14 Point started: ret=0 03:30:14 point_skyscan result=0 03:30:14 Check angles 03:30:14 SkyScan query 03:30:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.475<-21565 Statuses=0008 0009 03:30:15 Msec=0 True Az=112.995 Ze=-143.475 Az status=0008 Ze status=0009 03:30:15 Check angles 03:30:15 SkyScan query 03:30:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.535<-20169 Statuses=0008 0009 03:30:16 Msec=750 True Az=112.995 Ze=-122.535 Az status=0008 Ze status=0009 03:30:16 Check angles 03:30:16 SkyScan query 03:30:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 03:30:16 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 03:30:17 Check angles 03:30:17 SkyScan query 03:30:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.74<-17316 Statuses=0008 0009 03:30:17 Msec=2250 True Az=112.995 Ze=-79.74 Az status=0008 Ze status=0009 03:30:17 Check angles 03:30:17 SkyScan query 03:30:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.785<-15919 Statuses=0008 0009 03:30:18 Msec=3000 True Az=112.995 Ze=-58.785 Az status=0008 Ze status=0009 03:30:18 Check angles 03:30:18 SkyScan query 03:30:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.83<-14522 Statuses=0008 0009 03:30:19 Msec=3750 True Az=112.995 Ze=-37.83 Az status=0008 Ze status=0009 03:30:19 Check angles 03:30:19 SkyScan query 03:30:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.875<-13125 Statuses=0008 0009 03:30:19 Msec=4500 True Az=112.995 Ze=-16.875 Az status=0008 Ze status=0009 03:30:20 Check angles 03:30:20 SkyScan query 03:30:20 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 03:30:20 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 03:30:20 Check angles 03:30:20 SkyScan query 03:30:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:30:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:30:21 Message to Master queued w/err=0: serial=92583 error=0 03:30:26 Received message from Master: op=Filter serial=92584 03:30:26 Color wheel filter change from 0 to 0 03:30:26 FLIGetFilterPos err=0 currentPosition=0 03:30:26 FLIGetStepsRemaining err=0 RemainingSteps=0 03:30:26 Filter is already there-color wheel unchanged 03:30:26 Received message from Master: op=Shutter serial=92585 03:30:26 Shutter LASER close 03:30:26 Received message from Camera: op=State serial=92587 03:30:26 GetSingleValue result=40 Value=cccccccc 03:30:26 SkyScan query 03:30:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:30:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:27 Parameters OK 03:30:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:27 Set A/D data flow result=40 03:30:27 Set A/D channel type result=40 03:30:27 Set A/D encoding result=40 03:30:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:27 Set channel filter=0.000000e+000 result=40 03:30:27 Config A/D Result=40 03:30:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:27 Get A/D filter: -9.255963e+061 result=40 03:30:27 Get A/D value=-858993460 result=40 03:30:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:27 Parameters OK 03:30:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:27 Set A/D data flow result=40 03:30:27 Set A/D channel type result=40 03:30:27 Set A/D encoding result=40 03:30:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:27 Set channel filter=0.000000e+000 result=40 03:30:27 Config A/D Result=40 03:30:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:27 Get A/D filter: -9.255963e+061 result=40 03:30:27 Get A/D value=-858993460 result=40 03:30:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:30:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:30:27 Aux= 03:30:27 Message to Camera, serial 92587 queued 03:31:04 Received message from Master: op=PointingHead serial=92600 03:31:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:31:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:31:04 Point started: ret=0 03:31:04 point_skyscan result=0 03:31:05 Check angles 03:31:05 SkyScan query 03:31:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:31:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:31:05 Message to Master queued w/err=0: serial=92600 error=0 03:31:10 Received message from Master: op=Filter serial=92601 03:31:10 Color wheel filter change from 0 to 0 03:31:10 FLIGetFilterPos err=0 currentPosition=0 03:31:10 FLIGetStepsRemaining err=0 RemainingSteps=0 03:31:10 Filter is already there-color wheel unchanged 03:31:10 Received message from Master: op=Shutter serial=92602 03:31:10 Shutter LASER close 03:31:11 Received message from Camera: op=State serial=92604 03:31:11 GetSingleValue result=40 Value=cccccccc 03:31:11 SkyScan query 03:31:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:31:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:11 Parameters OK 03:31:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:11 Set A/D data flow result=40 03:31:11 Set A/D channel type result=40 03:31:11 Set A/D encoding result=40 03:31:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:11 Set channel filter=0.000000e+000 result=40 03:31:11 Config A/D Result=40 03:31:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:11 Get A/D filter: -9.255963e+061 result=40 03:31:11 Get A/D value=-858993460 result=40 03:31:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:11 Parameters OK 03:31:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:11 Set A/D data flow result=40 03:31:11 Set A/D channel type result=40 03:31:11 Set A/D encoding result=40 03:31:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:11 Set channel filter=0.000000e+000 result=40 03:31:11 Config A/D Result=40 03:31:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:11 Get A/D filter: -9.255963e+061 result=40 03:31:11 Get A/D value=-858993460 result=40 03:31:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:31:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:31:11 Aux= 03:31:11 Message to Camera, serial 92604 queued 03:31:48 Received message from Master: op=PointingHead serial=92616 03:31:48 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:31:48 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:31:49 Point started: ret=0 03:31:49 point_skyscan result=0 03:31:49 Check angles 03:31:49 SkyScan query 03:31:50 SkyScan query done: ret=0 az=136.635<-9109 ze=-6.51<-12434 Statuses=0009 0008 03:31:50 Msec=0 True Az=136.635 Ze=-6.51 Az status=0009 Ze status=0008 03:31:50 Check angles 03:31:50 SkyScan query 03:31:51 SkyScan query done: ret=0 az=154.05<-10270 ze=-6.495<-12433 Statuses=0009 0008 03:31:51 Msec=750 True Az=154.05 Ze=-6.495 Az status=0009 Ze status=0008 03:31:51 Check angles 03:31:51 SkyScan query 03:31:52 SkyScan query done: ret=0 az=171.885<-11459 ze=-6.495<-12433 Statuses=0009 0008 03:31:52 Msec=1500 True Az=171.885 Ze=-6.495 Az status=0009 Ze status=0008 03:31:52 Check angles 03:31:52 SkyScan query 03:31:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:31:52 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 03:31:52 Message to Master queued w/err=0: serial=92616 error=0 03:31:57 Received message from Master: op=Filter serial=92617 03:31:57 Color wheel filter change from 0 to 0 03:31:57 FLIGetFilterPos err=0 currentPosition=0 03:31:57 FLIGetStepsRemaining err=0 RemainingSteps=0 03:31:57 Filter is already there-color wheel unchanged 03:31:58 Received message from Master: op=Shutter serial=92618 03:31:58 Shutter LASER close 03:31:58 Received message from Camera: op=State serial=92620 03:31:58 GetSingleValue result=40 Value=cccccccc 03:31:58 SkyScan query 03:31:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:31:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:59 Parameters OK 03:31:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:59 Set A/D data flow result=40 03:31:59 Set A/D channel type result=40 03:31:59 Set A/D encoding result=40 03:31:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:59 Set channel filter=0.000000e+000 result=40 03:31:59 Config A/D Result=40 03:31:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:59 Get A/D filter: -9.255963e+061 result=40 03:31:59 Get A/D value=-858993460 result=40 03:31:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:59 Parameters OK 03:31:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:59 Set A/D data flow result=40 03:31:59 Set A/D channel type result=40 03:31:59 Set A/D encoding result=40 03:31:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:59 Set channel filter=0.000000e+000 result=40 03:31:59 Config A/D Result=40 03:31:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:59 Get A/D filter: -9.255963e+061 result=40 03:31:59 Get A/D value=-858993460 result=40 03:31:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:31:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:31:59 Aux= 03:31:59 Message to Camera, serial 92620 queued 03:32:37 Received message from Master: op=PointingHead serial=92632 03:32:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:32:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:32:37 Point started: ret=0 03:32:37 point_skyscan result=0 03:32:38 Check angles 03:32:38 SkyScan query 03:32:38 SkyScan query done: ret=0 az=151.755<-10117 ze=6.51<-11566 Statuses=0009 0008 03:32:38 Msec=0 True Az=151.755 Ze=6.51 Az status=0009 Ze status=0008 03:32:38 Check angles 03:32:38 SkyScan query 03:32:39 SkyScan query done: ret=0 az=134.355<-8957 ze=6.495<-11567 Statuses=0009 0008 03:32:39 Msec=750 True Az=134.355 Ze=6.495 Az status=0009 Ze status=0008 03:32:39 Check angles 03:32:39 SkyScan query 03:32:40 SkyScan query done: ret=0 az=116.835<-7789 ze=6.495<-11567 Statuses=0009 0008 03:32:40 Msec=1500 True Az=116.835 Ze=6.495 Az status=0009 Ze status=0008 03:32:40 Check angles 03:32:40 SkyScan query 03:32:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:32:41 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:32:41 Message to Master queued w/err=0: serial=92632 error=0 03:32:46 Received message from Master: op=Filter serial=92633 03:32:46 Color wheel filter change from 0 to 0 03:32:46 FLIGetFilterPos err=0 currentPosition=0 03:32:46 FLIGetStepsRemaining err=0 RemainingSteps=0 03:32:46 Filter is already there-color wheel unchanged 03:32:47 Received message from Master: op=Shutter serial=92634 03:32:47 Shutter LASER close 03:32:47 Received message from Camera: op=State serial=92636 03:32:47 GetSingleValue result=40 Value=cccccccc 03:32:47 SkyScan query 03:32:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:32:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:47 Parameters OK 03:32:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:47 Set A/D data flow result=40 03:32:47 Set A/D channel type result=40 03:32:47 Set A/D encoding result=40 03:32:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:47 Set channel filter=0.000000e+000 result=40 03:32:47 Config A/D Result=40 03:32:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:47 Get A/D filter: -9.255963e+061 result=40 03:32:47 Get A/D value=-858993460 result=40 03:32:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:47 Parameters OK 03:32:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:47 Set A/D data flow result=40 03:32:47 Set A/D channel type result=40 03:32:47 Set A/D encoding result=40 03:32:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:47 Set channel filter=0.000000e+000 result=40 03:32:47 Config A/D Result=40 03:32:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:47 Get A/D filter: -9.255963e+061 result=40 03:32:47 Get A/D value=-858993460 result=40 03:32:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:32:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:32:47 Aux= 03:32:47 Message to Camera, serial 92636 queued 03:33:25 Received message from Master: op=PointingHead serial=92648 03:33:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:33:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:33:25 Point started: ret=0 03:33:25 point_skyscan result=0 03:33:26 Check angles 03:33:26 SkyScan query 03:33:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 03:33:27 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 03:33:27 Check angles 03:33:27 SkyScan query 03:33:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.105<-15007 Statuses=0008 0009 03:33:27 Msec=750 True Az=112.995 Ze=-45.105 Az status=0008 Ze status=0009 03:33:28 Check angles 03:33:28 SkyScan query 03:33:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.925<-16395 Statuses=0008 0009 03:33:28 Msec=1500 True Az=112.995 Ze=-65.925 Az status=0008 Ze status=0009 03:33:28 Check angles 03:33:28 SkyScan query 03:33:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.64<-17776 Statuses=0008 0009 03:33:29 Msec=2250 True Az=112.995 Ze=-86.64 Az status=0008 Ze status=0009 03:33:29 Check angles 03:33:29 SkyScan query 03:33:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 03:33:30 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 03:33:30 Check angles 03:33:30 SkyScan query 03:33:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.85<-20590 Statuses=0008 0009 03:33:30 Msec=3750 True Az=112.995 Ze=-128.85 Az status=0008 Ze status=0009 03:33:31 Check angles 03:33:31 SkyScan query 03:33:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 03:33:31 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 03:33:31 Check angles 03:33:31 SkyScan query 03:33:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.67<-23378 Statuses=0008 0009 03:33:32 Msec=5250 True Az=112.995 Ze=-170.67 Az status=0008 Ze status=0009 03:33:32 Check angles 03:33:32 SkyScan query 03:33:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:33:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:33:33 Message to Master queued w/err=0: serial=92648 error=0 03:33:38 Received message from Master: op=Filter serial=92649 03:33:38 Color wheel filter change from 0 to 0 03:33:38 FLIGetFilterPos err=0 currentPosition=0 03:33:38 FLIGetStepsRemaining err=0 RemainingSteps=0 03:33:38 Filter is already there-color wheel unchanged 03:33:38 Received message from Master: op=Identify serial=92650 03:33:38 Received message from Master: op=Shutter serial=92653 03:33:38 Shutter LASER open 03:33:38 Received message from Camera: op=State serial=92655 03:33:38 GetSingleValue result=40 Value=cccccccc 03:33:38 SkyScan query 03:33:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:33:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:39 Parameters OK 03:33:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:39 Set A/D data flow result=40 03:33:39 Set A/D channel type result=40 03:33:39 Set A/D encoding result=40 03:33:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:39 Set channel filter=0.000000e+000 result=40 03:33:39 Config A/D Result=40 03:33:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:39 Get A/D filter: -9.255963e+061 result=40 03:33:39 Get A/D value=-858993460 result=40 03:33:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:39 Parameters OK 03:33:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:39 Set A/D data flow result=40 03:33:39 Set A/D channel type result=40 03:33:39 Set A/D encoding result=40 03:33:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:39 Set channel filter=0.000000e+000 result=40 03:33:39 Config A/D Result=40 03:33:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:39 Get A/D filter: -9.255963e+061 result=40 03:33:39 Get A/D value=-858993460 result=40 03:33:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:33:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:33:39 Aux= 03:33:39 Message to Camera, serial 92655 queued 03:33:46 Received message from Master: op=Shutter serial=92664 03:33:46 Shutter LASER close 03:33:47 Received message from Master: op=PointingHead serial=92668 03:33:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:33:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:33:48 Point started: ret=0 03:33:48 point_skyscan result=0 03:33:49 Check angles 03:33:49 SkyScan query 03:33:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 03:33:49 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 03:33:49 Check angles 03:33:49 SkyScan query 03:33:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.34<-20156 Statuses=0008 0009 03:33:50 Msec=750 True Az=112.995 Ze=-122.34 Az status=0008 Ze status=0009 03:33:50 Check angles 03:33:50 SkyScan query 03:33:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.845<-18723 Statuses=0008 0009 03:33:51 Msec=1500 True Az=112.995 Ze=-100.845 Az status=0008 Ze status=0009 03:33:51 Check angles 03:33:51 SkyScan query 03:33:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.485<-17299 Statuses=0008 0009 03:33:51 Msec=2250 True Az=112.995 Ze=-79.485 Az status=0008 Ze status=0009 03:33:52 Check angles 03:33:52 SkyScan query 03:33:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.935<-15929 Statuses=0008 0009 03:33:52 Msec=3000 True Az=112.995 Ze=-58.935 Az status=0008 Ze status=0009 03:33:52 Check angles 03:33:52 SkyScan query 03:33:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.575<-14505 Statuses=0008 0009 03:33:53 Msec=3750 True Az=112.995 Ze=-37.575 Az status=0008 Ze status=0009 03:33:53 Check angles 03:33:53 SkyScan query 03:33:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.23<-13082 Statuses=0008 0009 03:33:54 Msec=4500 True Az=112.995 Ze=-16.23 Az status=0008 Ze status=0009 03:33:54 Check angles 03:33:54 SkyScan query 03:33:54 SkyScan query done: ret=0 az=112.995<-7533 ze=4.23<-11718 Statuses=0008 0009 03:33:54 Msec=5250 True Az=112.995 Ze=4.23 Az status=0008 Ze status=0009 03:33:55 Check angles 03:33:55 SkyScan query 03:33:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:33:55 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:33:55 Message to Master queued w/err=0: serial=92668 error=0 03:34:00 Received message from Master: op=Filter serial=92669 03:34:00 Color wheel filter change from 0 to 0 03:34:00 FLIGetFilterPos err=0 currentPosition=0 03:34:00 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:00 Filter is already there-color wheel unchanged 03:34:01 Received message from Master: op=Shutter serial=92670 03:34:01 Shutter LASER close 03:34:01 Received message from Camera: op=State serial=92672 03:34:01 GetSingleValue result=40 Value=cccccccc 03:34:01 SkyScan query 03:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:34:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:02 Parameters OK 03:34:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:02 Set A/D data flow result=40 03:34:02 Set A/D channel type result=40 03:34:02 Set A/D encoding result=40 03:34:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:02 Set channel filter=0.000000e+000 result=40 03:34:02 Config A/D Result=40 03:34:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:02 Get A/D filter: -9.255963e+061 result=40 03:34:02 Get A/D value=-858993460 result=40 03:34:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:02 Parameters OK 03:34:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:02 Set A/D data flow result=40 [UTC 2019-3-4 03:34:02] 03:34:02 Set A/D channel type result=40 03:34:02 Set A/D encoding result=40 03:34:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:02 Set channel filter=0.000000e+000 result=40 03:34:02 Config A/D Result=40 03:34:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:02 Get A/D filter: -9.255963e+061 result=40 03:34:02 Get A/D value=-858993460 result=40 03:34:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:02 Aux= 03:34:02 Message to Camera, serial 92672 queued 03:34:38 Received message from Master: op=PointingHead serial=92684 03:34:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:34:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:34:39 Point started: ret=0 03:34:39 point_skyscan result=0 03:34:39 Check angles 03:34:39 SkyScan query 03:34:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:34:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:34:40 Message to Master queued w/err=0: serial=92684 error=0 03:34:45 Received message from Master: op=Filter serial=92685 03:34:45 Color wheel filter change from 0 to 0 03:34:45 FLIGetFilterPos err=0 currentPosition=0 03:34:45 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:45 Filter is already there-color wheel unchanged 03:34:45 Received message from Master: op=Shutter serial=92686 03:34:45 Shutter LASER close 03:34:46 Received message from Camera: op=State serial=92688 03:34:46 GetSingleValue result=40 Value=cccccccc 03:34:46 SkyScan query 03:34:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:34:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:46 Parameters OK 03:34:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:46 Set A/D data flow result=40 03:34:46 Set A/D channel type result=40 03:34:46 Set A/D encoding result=40 03:34:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:46 Set channel filter=0.000000e+000 result=40 03:34:46 Config A/D Result=40 03:34:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:46 Get A/D filter: -9.255963e+061 result=40 03:34:46 Get A/D value=-858993460 result=40 03:34:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:46 Parameters OK 03:34:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:46 Set A/D data flow result=40 03:34:46 Set A/D channel type result=40 03:34:46 Set A/D encoding result=40 03:34:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:46 Set channel filter=0.000000e+000 result=40 03:34:46 Config A/D Result=40 03:34:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:46 Get A/D filter: -9.255963e+061 result=40 03:34:46 Get A/D value=-858993460 result=40 03:34:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:46 Aux= 03:34:46 Message to Camera, serial 92688 queued 03:35:23 Received message from Master: op=PointingHead serial=92700 03:35:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:35:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:35:23 Point started: ret=0 03:35:23 point_skyscan result=0 03:35:24 Check angles 03:35:24 SkyScan query 03:35:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:35:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:35:25 Message to Master queued w/err=0: serial=92700 error=0 03:35:30 Received message from Master: op=Filter serial=92701 03:35:30 Color wheel filter change from 0 to 0 03:35:30 FLIGetFilterPos err=0 currentPosition=0 03:35:30 FLIGetStepsRemaining err=0 RemainingSteps=0 03:35:30 Filter is already there-color wheel unchanged 03:35:30 Received message from Master: op=Shutter serial=92702 03:35:30 Shutter LASER close 03:35:30 Received message from Camera: op=State serial=92704 03:35:30 GetSingleValue result=40 Value=cccccccc 03:35:30 SkyScan query 03:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:35:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:31 Parameters OK 03:35:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:31 Set A/D data flow result=40 03:35:31 Set A/D channel type result=40 03:35:31 Set A/D encoding result=40 03:35:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:31 Set channel filter=0.000000e+000 result=40 03:35:31 Config A/D Result=40 03:35:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:31 Get A/D filter: -9.255963e+061 result=40 03:35:31 Get A/D value=-858993460 result=40 03:35:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:31 Parameters OK 03:35:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:31 Set A/D data flow result=40 03:35:31 Set A/D channel type result=40 03:35:31 Set A/D encoding result=40 03:35:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:31 Set channel filter=0.000000e+000 result=40 03:35:31 Config A/D Result=40 03:35:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:31 Get A/D filter: -9.255963e+061 result=40 03:35:31 Get A/D value=-858993460 result=40 03:35:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:35:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:35:31 Aux= 03:35:31 Message to Camera, serial 92704 queued 03:36:08 Received message from Master: op=PointingHead serial=92716 03:36:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:36:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:36:08 Point started: ret=0 03:36:08 point_skyscan result=0 03:36:09 Check angles 03:36:09 SkyScan query 03:36:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:36:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:36:10 Message to Master queued w/err=0: serial=92716 error=0 03:36:15 Received message from Master: op=Filter serial=92717 03:36:15 Color wheel filter change from 0 to 0 03:36:15 FLIGetFilterPos err=0 currentPosition=0 03:36:15 FLIGetStepsRemaining err=0 RemainingSteps=0 03:36:15 Filter is already there-color wheel unchanged 03:36:15 Received message from Master: op=Shutter serial=92718 03:36:15 Shutter LASER close 03:36:16 Received message from Camera: op=State serial=92720 03:36:16 GetSingleValue result=40 Value=cccccccc 03:36:16 SkyScan query 03:36:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:36:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:16 Parameters OK 03:36:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:16 Set A/D data flow result=40 03:36:16 Set A/D channel type result=40 03:36:16 Set A/D encoding result=40 03:36:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:16 Set channel filter=0.000000e+000 result=40 03:36:16 Config A/D Result=40 03:36:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:16 Get A/D filter: -9.255963e+061 result=40 03:36:16 Get A/D value=-858993460 result=40 03:36:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:16 Parameters OK 03:36:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:16 Set A/D data flow result=40 03:36:16 Set A/D channel type result=40 03:36:16 Set A/D encoding result=40 03:36:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:16 Set channel filter=0.000000e+000 result=40 03:36:16 Config A/D Result=40 03:36:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:16 Get A/D filter: -9.255963e+061 result=40 03:36:16 Get A/D value=-858993460 result=40 03:36:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:36:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:36:16 Aux= 03:36:16 Message to Camera, serial 92720 queued 03:36:53 Received message from Master: op=PointingHead serial=92732 03:36:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:36:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:36:54 Point started: ret=0 03:36:54 point_skyscan result=0 03:36:54 Check angles 03:36:54 SkyScan query 03:36:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.505<-13567 Statuses=0008 0009 03:36:55 Msec=0 True Az=112.995 Ze=-23.505 Az status=0008 Ze status=0009 03:36:55 Check angles 03:36:55 SkyScan query 03:36:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 03:36:56 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 03:36:56 Check angles 03:36:56 SkyScan query 03:36:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.285<-16419 Statuses=0008 0009 03:36:56 Msec=1500 True Az=112.995 Ze=-66.285 Az status=0008 Ze status=0009 03:36:57 Check angles 03:36:57 SkyScan query 03:36:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 03:36:57 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 03:36:57 Check angles 03:36:57 SkyScan query 03:36:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-108<-19200 Statuses=0008 0009 03:36:58 Msec=3000 True Az=112.995 Ze=-108 Az status=0008 Ze status=0009 03:36:58 Check angles 03:36:58 SkyScan query 03:36:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.325<-20555 Statuses=0008 0009 03:36:59 Msec=3750 True Az=112.995 Ze=-128.325 Az status=0008 Ze status=0009 03:36:59 Check angles 03:36:59 SkyScan query 03:36:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.63<-22042 Statuses=0008 0009 03:36:59 Msec=4500 True Az=112.995 Ze=-150.63 Az status=0008 Ze status=0009 03:37:00 Check angles 03:37:00 SkyScan query 03:37:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.58<-23372 Statuses=0008 0009 03:37:00 Msec=5250 True Az=112.995 Ze=-170.58 Az status=0008 Ze status=0009 03:37:00 Check angles 03:37:00 SkyScan query 03:37:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:37:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:37:01 Message to Master queued w/err=0: serial=92732 error=0 03:37:06 Received message from Master: op=Filter serial=92733 03:37:06 Color wheel filter change from 0 to 0 03:37:06 FLIGetFilterPos err=0 currentPosition=0 03:37:06 FLIGetStepsRemaining err=0 RemainingSteps=0 03:37:06 Filter is already there-color wheel unchanged 03:37:07 Received message from Master: op=Shutter serial=92734 03:37:07 Shutter LASER open 03:37:07 Received message from Camera: op=State serial=92736 03:37:07 GetSingleValue result=40 Value=cccccccc 03:37:07 SkyScan query 03:37:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:37:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:08 Parameters OK 03:37:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:08 Set A/D data flow result=40 03:37:08 Set A/D channel type result=40 03:37:08 Set A/D encoding result=40 03:37:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:08 Set channel filter=0.000000e+000 result=40 03:37:08 Config A/D Result=40 03:37:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:08 Get A/D filter: -9.255963e+061 result=40 03:37:08 Get A/D value=-858993460 result=40 03:37:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:08 Parameters OK 03:37:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:08 Set A/D data flow result=40 03:37:08 Set A/D channel type result=40 03:37:08 Set A/D encoding result=40 03:37:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:08 Set channel filter=0.000000e+000 result=40 03:37:08 Config A/D Result=40 03:37:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:08 Get A/D filter: -9.255963e+061 result=40 03:37:08 Get A/D value=-858993460 result=40 03:37:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:37:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:37:08 Aux= 03:37:08 Message to Camera, serial 92736 queued 03:37:16 Received message from Master: op=Shutter serial=92745 03:37:16 Shutter LASER close 03:37:17 Received message from Master: op=PointingHead serial=92749 03:37:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:37:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:37:17 Point started: ret=0 03:37:17 point_skyscan result=0 03:37:18 Check angles 03:37:18 SkyScan query 03:37:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.695<-21513 Statuses=0008 0009 03:37:19 Msec=0 True Az=112.995 Ze=-142.695 Az status=0008 Ze status=0009 03:37:19 Check angles 03:37:19 SkyScan query 03:37:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.455<-20097 Statuses=0008 0009 03:37:19 Msec=750 True Az=112.995 Ze=-121.455 Az status=0008 Ze status=0009 03:37:20 Check angles 03:37:20 SkyScan query 03:37:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.095<-18673 Statuses=0008 0009 03:37:20 Msec=1500 True Az=112.995 Ze=-100.095 Az status=0008 Ze status=0009 03:37:20 Check angles 03:37:20 SkyScan query 03:37:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-78.21<-17214 Statuses=0008 0009 03:37:21 Msec=2250 True Az=112.995 Ze=-78.21 Az status=0008 Ze status=0009 03:37:21 Check angles 03:37:21 SkyScan query 03:37:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.6<-15840 Statuses=0008 0009 03:37:22 Msec=3000 True Az=112.995 Ze=-57.6 Az status=0008 Ze status=0009 03:37:22 Check angles 03:37:22 SkyScan query 03:37:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.225<-14415 Statuses=0008 0009 03:37:23 Msec=3750 True Az=112.995 Ze=-36.225 Az status=0008 Ze status=0009 03:37:23 Check angles 03:37:23 SkyScan query 03:37:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.645<-13043 Statuses=0008 0009 03:37:23 Msec=4500 True Az=112.995 Ze=-15.645 Az status=0008 Ze status=0009 03:37:23 Check angles 03:37:23 SkyScan query 03:37:24 SkyScan query done: ret=0 az=112.995<-7533 ze=4.98<-11668 Statuses=0008 0009 03:37:24 Msec=5250 True Az=112.995 Ze=4.98 Az status=0008 Ze status=0009 03:37:24 Check angles 03:37:24 SkyScan query 03:37:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:37:25 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:37:25 Message to Master queued w/err=0: serial=92749 error=0 03:37:30 Received message from Master: op=Filter serial=92750 03:37:30 Color wheel filter change from 0 to 0 03:37:30 FLIGetFilterPos err=0 currentPosition=0 03:37:30 FLIGetStepsRemaining err=0 RemainingSteps=0 03:37:30 Filter is already there-color wheel unchanged 03:37:31 Received message from Master: op=Shutter serial=92751 03:37:31 Shutter LASER close 03:37:31 Received message from Camera: op=State serial=92753 03:37:31 GetSingleValue result=40 Value=cccccccc 03:37:31 SkyScan query 03:37:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:37:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:31 Parameters OK 03:37:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:31 Set A/D data flow result=40 03:37:31 Set A/D channel type result=40 03:37:31 Set A/D encoding result=40 03:37:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:31 Set channel filter=0.000000e+000 result=40 03:37:31 Config A/D Result=40 03:37:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:31 Get A/D filter: -9.255963e+061 result=40 03:37:31 Get A/D value=-858993460 result=40 03:37:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:31 Parameters OK 03:37:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:31 Set A/D data flow result=40 03:37:31 Set A/D channel type result=40 03:37:31 Set A/D encoding result=40 03:37:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:31 Set channel filter=0.000000e+000 result=40 03:37:31 Config A/D Result=40 03:37:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:31 Get A/D filter: -9.255963e+061 result=40 03:37:31 Get A/D value=-858993460 result=40 03:37:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:37:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:37:31 Aux= 03:37:31 Message to Camera, serial 92753 queued 03:38:08 Received message from Master: op=PointingHead serial=92765 03:38:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:38:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:38:09 Point started: ret=0 03:38:09 point_skyscan result=0 03:38:09 Check angles 03:38:09 SkyScan query 03:38:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:38:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:38:10 Message to Master queued w/err=0: serial=92765 error=0 03:38:15 Received message from Master: op=Filter serial=92766 03:38:15 Color wheel filter change from 0 to 0 03:38:15 FLIGetFilterPos err=0 currentPosition=0 03:38:15 FLIGetStepsRemaining err=0 RemainingSteps=0 03:38:15 Filter is already there-color wheel unchanged 03:38:15 Received message from Master: op=Shutter serial=92767 03:38:15 Shutter LASER close 03:38:15 Received message from Camera: op=State serial=92769 03:38:15 GetSingleValue result=40 Value=cccccccc 03:38:15 SkyScan query 03:38:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:38:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:16 Parameters OK 03:38:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:16 Set A/D data flow result=40 03:38:16 Set A/D channel type result=40 03:38:16 Set A/D encoding result=40 03:38:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:16 Set channel filter=0.000000e+000 result=40 03:38:16 Config A/D Result=40 03:38:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:16 Get A/D filter: -9.255963e+061 result=40 03:38:16 Get A/D value=-858993460 result=40 03:38:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:16 Parameters OK 03:38:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:16 Set A/D data flow result=40 03:38:16 Set A/D channel type result=40 03:38:16 Set A/D encoding result=40 03:38:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:16 Set channel filter=0.000000e+000 result=40 03:38:16 Config A/D Result=40 03:38:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:16 Get A/D filter: -9.255963e+061 result=40 03:38:16 Get A/D value=-858993460 result=40 03:38:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:38:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:38:16 Aux= 03:38:16 Message to Camera, serial 92769 queued 03:38:53 Received message from Master: op=PointingHead serial=92782 03:38:53 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:38:53 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:38:53 Point started: ret=0 03:38:53 point_skyscan result=0 03:38:54 Check angles 03:38:54 SkyScan query 03:38:54 SkyScan query done: ret=0 az=135.78<-9052 ze=-6.51<-12434 Statuses=0009 0008 03:38:54 Msec=0 True Az=135.78 Ze=-6.51 Az status=0009 Ze status=0008 03:38:54 Check angles 03:38:54 SkyScan query 03:38:55 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.495<-12433 Statuses=0009 0008 03:38:55 Msec=750 True Az=153.525 Ze=-6.495 Az status=0009 Ze status=0008 03:38:55 Check angles 03:38:55 SkyScan query 03:38:56 SkyScan query done: ret=0 az=171.405<-11427 ze=-6.495<-12433 Statuses=0009 0008 03:38:56 Msec=1500 True Az=171.405 Ze=-6.495 Az status=0009 Ze status=0008 03:38:56 Check angles 03:38:56 SkyScan query 03:38:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:38:57 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 03:38:57 Message to Master queued w/err=0: serial=92782 error=0 03:39:02 Received message from Master: op=Filter serial=92783 03:39:02 Color wheel filter change from 0 to 0 03:39:02 FLIGetFilterPos err=0 currentPosition=0 03:39:02 FLIGetStepsRemaining err=0 RemainingSteps=0 03:39:02 Filter is already there-color wheel unchanged 03:39:02 Received message from Master: op=Shutter serial=92784 03:39:02 Shutter LASER close 03:39:02 Received message from Camera: op=State serial=92786 03:39:02 GetSingleValue result=40 Value=cccccccc 03:39:02 SkyScan query 03:39:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:39:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:02 Parameters OK 03:39:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:02 Set A/D data flow result=40 03:39:02 Set A/D channel type result=40 03:39:02 Set A/D encoding result=40 03:39:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:02 Set channel filter=0.000000e+000 result=40 03:39:02 Config A/D Result=40 03:39:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:02 Get A/D filter: -9.255963e+061 result=40 03:39:02 Get A/D value=-858993460 result=40 03:39:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:02 Parameters OK 03:39:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:02 Set A/D data flow result=40 03:39:02 Set A/D channel type result=40 03:39:02 Set A/D encoding result=40 03:39:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:02 Set channel filter=0.000000e+000 result=40 03:39:02 Config A/D Result=40 03:39:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:02 Get A/D filter: -9.255963e+061 result=40 03:39:02 Get A/D value=-858993460 result=40 03:39:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:39:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:39:02 Aux= 03:39:02 Message to Camera, serial 92786 queued 03:39:39 Received message from Master: op=PointingHead serial=92799 03:39:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:39:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:39:39 Point started: ret=0 03:39:39 point_skyscan result=0 03:39:40 Check angles 03:39:40 SkyScan query 03:39:41 SkyScan query done: ret=0 az=152.94<-10196 ze=6.51<-11566 Statuses=0009 0008 03:39:41 Msec=0 True Az=152.94 Ze=6.51 Az status=0009 Ze status=0008 03:39:41 Check angles 03:39:41 SkyScan query 03:39:42 SkyScan query done: ret=0 az=135.48<-9032 ze=6.495<-11567 Statuses=0009 0008 03:39:42 Msec=750 True Az=135.48 Ze=6.495 Az status=0009 Ze status=0008 03:39:42 Check angles 03:39:42 SkyScan query 03:39:42 SkyScan query done: ret=0 az=117.945<-7863 ze=6.495<-11567 Statuses=0009 0008 03:39:42 Msec=1500 True Az=117.945 Ze=6.495 Az status=0009 Ze status=0008 03:39:42 Check angles 03:39:42 SkyScan query 03:39:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:39:43 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:39:43 Message to Master queued w/err=0: serial=92799 error=0 03:39:48 Received message from Master: op=Filter serial=92800 03:39:48 Color wheel filter change from 0 to 0 03:39:48 FLIGetFilterPos err=0 currentPosition=0 03:39:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:39:48 Filter is already there-color wheel unchanged 03:39:49 Received message from Master: op=Shutter serial=92801 03:39:49 Shutter LASER close 03:39:49 Received message from Camera: op=State serial=92803 03:39:49 GetSingleValue result=40 Value=cccccccc 03:39:49 SkyScan query 03:39:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:39:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:49 Parameters OK 03:39:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:49 Set A/D data flow result=40 03:39:49 Set A/D channel type result=40 03:39:49 Set A/D encoding result=40 03:39:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:49 Set channel filter=0.000000e+000 result=40 03:39:49 Config A/D Result=40 03:39:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:49 Get A/D filter: -9.255963e+061 result=40 03:39:49 Get A/D value=-858993460 result=40 03:39:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:49 Parameters OK 03:39:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:49 Set A/D data flow result=40 03:39:49 Set A/D channel type result=40 03:39:49 Set A/D encoding result=40 03:39:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:49 Set channel filter=0.000000e+000 result=40 03:39:49 Config A/D Result=40 03:39:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:49 Get A/D filter: -9.255963e+061 result=40 03:39:49 Get A/D value=-858993460 result=40 03:39:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:39:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:39:49 Aux= 03:39:49 Message to Camera, serial 92803 queued 03:40:26 Received message from Master: op=PointingHead serial=92816 03:40:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:40:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:40:26 Point started: ret=0 03:40:26 point_skyscan result=0 03:40:27 Check angles 03:40:27 SkyScan query 03:40:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 03:40:28 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 03:40:28 Check angles 03:40:28 SkyScan query 03:40:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 03:40:28 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 03:40:29 Check angles 03:40:29 SkyScan query 03:40:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 03:40:29 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 03:40:29 Check angles 03:40:29 SkyScan query 03:40:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.85<-17790 Statuses=0008 0009 03:40:30 Msec=2250 True Az=112.995 Ze=-86.85 Az status=0008 Ze status=0009 03:40:30 Check angles 03:40:30 SkyScan query 03:40:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 03:40:31 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 03:40:31 Check angles 03:40:31 SkyScan query 03:40:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.745<-20583 Statuses=0008 0009 03:40:31 Msec=3750 True Az=112.995 Ze=-128.745 Az status=0008 Ze status=0009 03:40:32 Check angles 03:40:32 SkyScan query 03:40:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.7<-21980 Statuses=0008 0009 03:40:32 Msec=4500 True Az=112.995 Ze=-149.7 Az status=0008 Ze status=0009 03:40:32 Check angles 03:40:32 SkyScan query 03:40:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.625<-23375 Statuses=0008 0009 03:40:33 Msec=5250 True Az=112.995 Ze=-170.625 Az status=0008 Ze status=0009 03:40:33 Check angles 03:40:33 SkyScan query 03:40:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:40:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:40:34 Message to Master queued w/err=0: serial=92816 error=0 03:40:39 Received message from Master: op=Filter serial=92817 03:40:39 Color wheel filter change from 0 to 0 03:40:39 FLIGetFilterPos err=0 currentPosition=0 03:40:39 FLIGetStepsRemaining err=0 RemainingSteps=0 03:40:39 Filter is already there-color wheel unchanged 03:40:39 Received message from Master: op=Shutter serial=92818 03:40:39 Shutter LASER open 03:40:39 Received message from Camera: op=State serial=92820 03:40:39 GetSingleValue result=40 Value=cccccccc 03:40:39 SkyScan query 03:40:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:40:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:40 Parameters OK 03:40:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:40 Set A/D data flow result=40 03:40:40 Set A/D channel type result=40 03:40:40 Set A/D encoding result=40 03:40:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:40 Set channel filter=0.000000e+000 result=40 03:40:40 Config A/D Result=40 03:40:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:40 Get A/D filter: -9.255963e+061 result=40 03:40:40 Get A/D value=-858993460 result=40 03:40:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:40 Parameters OK 03:40:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:40 Set A/D data flow result=40 03:40:40 Set A/D channel type result=40 03:40:40 Set A/D encoding result=40 03:40:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:40 Set channel filter=0.000000e+000 result=40 03:40:40 Config A/D Result=40 03:40:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:40 Get A/D filter: -9.255963e+061 result=40 03:40:40 Get A/D value=-858993460 result=40 03:40:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:40:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:40:40 Aux= 03:40:40 Message to Camera, serial 92820 queued 03:40:48 Received message from Master: op=Shutter serial=92830 03:40:48 Shutter LASER close 03:40:49 Received message from Master: op=PointingHead serial=92834 03:40:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:40:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:40:49 Point started: ret=0 03:40:49 point_skyscan result=0 03:40:50 Check angles 03:40:50 SkyScan query 03:40:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 03:40:50 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 03:40:50 Check angles 03:40:50 SkyScan query 03:40:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.935<-20129 Statuses=0008 0009 03:40:51 Msec=750 True Az=112.995 Ze=-121.935 Az status=0008 Ze status=0009 03:40:51 Check angles 03:40:51 SkyScan query 03:40:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.01<-18734 Statuses=0008 0009 03:40:52 Msec=1500 True Az=112.995 Ze=-101.01 Az status=0008 Ze status=0009 03:40:52 Check angles 03:40:52 SkyScan query 03:40:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.055<-17337 Statuses=0008 0009 03:40:52 Msec=2250 True Az=112.995 Ze=-80.055 Az status=0008 Ze status=0009 03:40:53 Check angles 03:40:53 SkyScan query 03:40:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.1<-15940 Statuses=0008 0009 03:40:53 Msec=3000 True Az=112.995 Ze=-59.1 Az status=0008 Ze status=0009 03:40:53 Check angles 03:40:53 SkyScan query 03:40:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.145<-14543 Statuses=0008 0009 03:40:54 Msec=3750 True Az=112.995 Ze=-38.145 Az status=0008 Ze status=0009 03:40:54 Check angles 03:40:54 SkyScan query 03:40:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.19<-13146 Statuses=0008 0009 03:40:55 Msec=4500 True Az=112.995 Ze=-17.19 Az status=0008 Ze status=0009 03:40:55 Check angles 03:40:55 SkyScan query 03:40:55 SkyScan query done: ret=0 az=112.995<-7533 ze=3.78<-11748 Statuses=0008 0009 03:40:55 Msec=5250 True Az=112.995 Ze=3.78 Az status=0008 Ze status=0009 03:40:56 Check angles 03:40:56 SkyScan query 03:40:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:40:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:40:56 Message to Master queued w/err=0: serial=92834 error=0 03:41:01 Received message from Master: op=Filter serial=92835 03:41:01 Color wheel filter change from 0 to 0 03:41:01 FLIGetFilterPos err=0 currentPosition=0 03:41:01 FLIGetStepsRemaining err=0 RemainingSteps=0 03:41:01 Filter is already there-color wheel unchanged 03:41:01 Received message from Master: op=Shutter serial=92836 03:41:01 Shutter LASER close 03:41:02 Received message from Camera: op=State serial=92838 03:41:02 GetSingleValue result=40 Value=cccccccc 03:41:02 SkyScan query 03:41:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:41:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:02 Parameters OK 03:41:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:02 Set A/D data flow result=40 03:41:02 Set A/D channel type result=40 03:41:02 Set A/D encoding result=40 03:41:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:02 Set channel filter=0.000000e+000 result=40 03:41:02 Config A/D Result=40 03:41:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:02 Get A/D filter: -9.255963e+061 result=40 03:41:02 Get A/D value=-858993460 result=40 03:41:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:02 Parameters OK 03:41:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:02 Set A/D data flow result=40 03:41:02 Set A/D channel type result=40 03:41:02 Set A/D encoding result=40 03:41:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:02 Set channel filter=0.000000e+000 result=40 03:41:02 Config A/D Result=40 03:41:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:02 Get A/D filter: -9.255963e+061 result=40 03:41:02 Get A/D value=-858993460 result=40 03:41:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:41:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:41:02 Aux= 03:41:02 Message to Camera, serial 92838 queued 03:41:39 Received message from Master: op=PointingHead serial=92851 03:41:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:41:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:41:39 Point started: ret=0 03:41:39 point_skyscan result=0 03:41:40 Check angles 03:41:40 SkyScan query 03:41:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:41:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:41:41 Message to Master queued w/err=0: serial=92851 error=0 03:41:46 Received message from Master: op=Filter serial=92852 03:41:46 Color wheel filter change from 0 to 0 03:41:46 FLIGetFilterPos err=0 currentPosition=0 03:41:46 FLIGetStepsRemaining err=0 RemainingSteps=0 03:41:46 Filter is already there-color wheel unchanged 03:41:46 Received message from Master: op=Shutter serial=92853 03:41:46 Shutter LASER close 03:41:46 Received message from Camera: op=State serial=92855 03:41:46 GetSingleValue result=40 Value=cccccccc 03:41:46 SkyScan query 03:41:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:41:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:47 Parameters OK 03:41:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:47 Set A/D data flow result=40 03:41:47 Set A/D channel type result=40 03:41:47 Set A/D encoding result=40 03:41:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:47 Set channel filter=0.000000e+000 result=40 03:41:47 Config A/D Result=40 03:41:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:47 Get A/D filter: -9.255963e+061 result=40 03:41:47 Get A/D value=-858993460 result=40 03:41:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:47 Parameters OK 03:41:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:47 Set A/D data flow result=40 03:41:47 Set A/D channel type result=40 03:41:47 Set A/D encoding result=40 03:41:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:47 Set channel filter=0.000000e+000 result=40 03:41:47 Config A/D Result=40 03:41:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:47 Get A/D filter: -9.255963e+061 result=40 03:41:47 Get A/D value=-858993460 result=40 03:41:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:41:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:41:47 Aux= 03:41:47 Message to Camera, serial 92855 queued 03:42:23 Received message from Master: op=PointingHead serial=92868 03:42:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:42:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:42:24 Point started: ret=0 03:42:24 point_skyscan result=0 03:42:24 Check angles 03:42:24 SkyScan query 03:42:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:42:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:42:25 Message to Master queued w/err=0: serial=92868 error=0 03:42:30 Received message from Master: op=Filter serial=92869 03:42:30 Color wheel filter change from 0 to 0 03:42:30 FLIGetFilterPos err=0 currentPosition=0 03:42:30 FLIGetStepsRemaining err=0 RemainingSteps=0 03:42:30 Filter is already there-color wheel unchanged 03:42:30 Received message from Master: op=Shutter serial=92870 03:42:30 Shutter LASER close 03:42:30 Received message from Camera: op=State serial=92872 03:42:30 GetSingleValue result=40 Value=cccccccc 03:42:30 SkyScan query 03:42:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:42:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:31 Parameters OK 03:42:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:31 Set A/D data flow result=40 03:42:31 Set A/D channel type result=40 03:42:31 Set A/D encoding result=40 03:42:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:31 Set channel filter=0.000000e+000 result=40 03:42:31 Config A/D Result=40 03:42:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:31 Get A/D filter: -9.255963e+061 result=40 03:42:31 Get A/D value=-858993460 result=40 03:42:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:31 Parameters OK 03:42:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:31 Set A/D data flow result=40 03:42:31 Set A/D channel type result=40 03:42:31 Set A/D encoding result=40 03:42:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:31 Set channel filter=0.000000e+000 result=40 03:42:31 Config A/D Result=40 03:42:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:31 Get A/D filter: -9.255963e+061 result=40 03:42:31 Get A/D value=-858993460 result=40 03:42:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:42:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:42:31 Aux= 03:42:31 Message to Camera, serial 92872 queued 03:43:08 Received message from Master: op=PointingHead serial=92885 03:43:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:43:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:43:08 Point started: ret=0 03:43:08 point_skyscan result=0 03:43:09 Check angles 03:43:09 SkyScan query 03:43:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:43:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:43:09 Message to Master queued w/err=0: serial=92885 error=0 03:43:14 Received message from Master: op=Filter serial=92886 03:43:14 Color wheel filter change from 0 to 0 03:43:14 FLIGetFilterPos err=0 currentPosition=0 03:43:14 FLIGetStepsRemaining err=0 RemainingSteps=0 03:43:14 Filter is already there-color wheel unchanged 03:43:14 Received message from Master: op=Shutter serial=92887 03:43:14 Shutter LASER close 03:43:15 Received message from Camera: op=State serial=92889 03:43:15 GetSingleValue result=40 Value=cccccccc 03:43:15 SkyScan query 03:43:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:43:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:15 Parameters OK 03:43:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:15 Set A/D data flow result=40 03:43:15 Set A/D channel type result=40 03:43:15 Set A/D encoding result=40 03:43:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:15 Set channel filter=0.000000e+000 result=40 03:43:15 Config A/D Result=40 03:43:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:15 Get A/D filter: -9.255963e+061 result=40 03:43:15 Get A/D value=-858993460 result=40 03:43:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:15 Parameters OK 03:43:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:15 Set A/D data flow result=40 03:43:15 Set A/D channel type result=40 03:43:15 Set A/D encoding result=40 03:43:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:15 Set channel filter=0.000000e+000 result=40 03:43:15 Config A/D Result=40 03:43:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:15 Get A/D filter: -9.255963e+061 result=40 03:43:15 Get A/D value=-858993460 result=40 03:43:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:43:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:43:15 Aux= 03:43:15 Message to Camera, serial 92889 queued [UTC 2019-3-4 03:43:50] 03:43:52 Received message from Master: op=PointingHead serial=92902 03:43:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:43:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:43:52 Point started: ret=0 03:43:52 point_skyscan result=0 03:43:53 Check angles 03:43:53 SkyScan query 03:43:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 03:43:54 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 03:43:54 Check angles 03:43:54 SkyScan query 03:43:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.715<-14981 Statuses=0008 0009 03:43:54 Msec=750 True Az=112.995 Ze=-44.715 Az status=0008 Ze status=0009 03:43:55 Check angles 03:43:55 SkyScan query 03:43:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.655<-16377 Statuses=0008 0009 03:43:55 Msec=1500 True Az=112.995 Ze=-65.655 Az status=0008 Ze status=0009 03:43:55 Check angles 03:43:55 SkyScan query 03:43:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 03:43:56 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 03:43:56 Check angles 03:43:56 SkyScan query 03:43:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-108<-19200 Statuses=0008 0009 03:43:57 Msec=3000 True Az=112.995 Ze=-108 Az status=0008 Ze status=0009 03:43:57 Check angles 03:43:57 SkyScan query 03:43:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.39<-20626 Statuses=0008 0009 03:43:57 Msec=3750 True Az=112.995 Ze=-129.39 Az status=0008 Ze status=0009 03:43:58 Check angles 03:43:58 SkyScan query 03:43:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.345<-22023 Statuses=0008 0009 03:43:58 Msec=4500 True Az=112.995 Ze=-150.345 Az status=0008 Ze status=0009 03:43:58 Check angles 03:43:58 SkyScan query 03:43:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0008 0009 03:43:59 Msec=5250 True Az=112.995 Ze=-171.465 Az status=0008 Ze status=0009 03:43:59 Check angles 03:43:59 SkyScan query 03:44:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:44:00 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:44:00 Message to Master queued w/err=0: serial=92902 error=0 03:44:05 Received message from Master: op=Filter serial=92903 03:44:05 Color wheel filter change from 0 to 0 03:44:05 FLIGetFilterPos err=0 currentPosition=0 03:44:05 FLIGetStepsRemaining err=0 RemainingSteps=0 03:44:05 Filter is already there-color wheel unchanged 03:44:05 Received message from Master: op=Shutter serial=92904 03:44:05 Shutter LASER open 03:44:05 Received message from Camera: op=State serial=92906 03:44:05 GetSingleValue result=40 Value=cccccccc 03:44:05 SkyScan query 03:44:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:44:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:06 Parameters OK 03:44:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:06 Set A/D data flow result=40 03:44:06 Set A/D channel type result=40 03:44:06 Set A/D encoding result=40 03:44:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:06 Set channel filter=0.000000e+000 result=40 03:44:06 Config A/D Result=40 03:44:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:06 Get A/D filter: -9.255963e+061 result=40 03:44:06 Get A/D value=-858993460 result=40 03:44:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:06 Parameters OK 03:44:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:06 Set A/D data flow result=40 03:44:06 Set A/D channel type result=40 03:44:06 Set A/D encoding result=40 03:44:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:06 Set channel filter=0.000000e+000 result=40 03:44:06 Config A/D Result=40 03:44:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:06 Get A/D filter: -9.255963e+061 result=40 03:44:06 Get A/D value=-858993460 result=40 03:44:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:44:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:44:06 Aux= 03:44:06 Message to Camera, serial 92906 queued 03:44:14 Received message from Master: op=Shutter serial=92916 03:44:14 Shutter LASER close 03:44:15 Received message from Master: op=PointingHead serial=92920 03:44:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:44:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:44:15 Point started: ret=0 03:44:15 point_skyscan result=0 03:44:16 Check angles 03:44:16 SkyScan query 03:44:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 03:44:16 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 03:44:16 Check angles 03:44:16 SkyScan query 03:44:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.55<-20170 Statuses=0008 0009 03:44:17 Msec=750 True Az=112.995 Ze=-122.55 Az status=0008 Ze status=0009 03:44:17 Check angles 03:44:17 SkyScan query 03:44:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.58<-18772 Statuses=0008 0009 03:44:18 Msec=1500 True Az=112.995 Ze=-101.58 Az status=0008 Ze status=0009 03:44:18 Check angles 03:44:18 SkyScan query 03:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.61<-17374 Statuses=0008 0009 03:44:19 Msec=2250 True Az=112.995 Ze=-80.61 Az status=0008 Ze status=0009 03:44:19 Check angles 03:44:19 SkyScan query 03:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.685<-15979 Statuses=0008 0009 03:44:19 Msec=3000 True Az=112.995 Ze=-59.685 Az status=0008 Ze status=0009 03:44:19 Check angles 03:44:19 SkyScan query 03:44:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.715<-14581 Statuses=0008 0009 03:44:20 Msec=3750 True Az=112.995 Ze=-38.715 Az status=0008 Ze status=0009 03:44:20 Check angles 03:44:20 SkyScan query 03:44:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.745<-13183 Statuses=0008 0009 03:44:21 Msec=4500 True Az=112.995 Ze=-17.745 Az status=0008 Ze status=0009 03:44:21 Check angles 03:44:21 SkyScan query 03:44:22 SkyScan query done: ret=0 az=112.995<-7533 ze=3.21<-11786 Statuses=0008 0009 03:44:22 Msec=5250 True Az=112.995 Ze=3.21 Az status=0008 Ze status=0009 03:44:22 Check angles 03:44:22 SkyScan query 03:44:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:44:22 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:44:22 Message to Master queued w/err=0: serial=92920 error=0 03:44:27 Received message from Master: op=Filter serial=92921 03:44:27 Color wheel filter change from 0 to 0 03:44:27 FLIGetFilterPos err=0 currentPosition=0 03:44:27 FLIGetStepsRemaining err=0 RemainingSteps=0 03:44:27 Filter is already there-color wheel unchanged 03:44:27 Received message from Master: op=Shutter serial=92922 03:44:27 Shutter LASER close 03:44:28 Received message from Camera: op=State serial=92924 03:44:28 GetSingleValue result=40 Value=cccccccc 03:44:28 SkyScan query 03:44:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:44:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:28 Parameters OK 03:44:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:28 Set A/D data flow result=40 03:44:28 Set A/D channel type result=40 03:44:28 Set A/D encoding result=40 03:44:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:28 Set channel filter=0.000000e+000 result=40 03:44:28 Config A/D Result=40 03:44:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:28 Get A/D filter: -9.255963e+061 result=40 03:44:28 Get A/D value=-858993460 result=40 03:44:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:28 Parameters OK 03:44:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:28 Set A/D data flow result=40 03:44:28 Set A/D channel type result=40 03:44:28 Set A/D encoding result=40 03:44:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:28 Set channel filter=0.000000e+000 result=40 03:44:28 Config A/D Result=40 03:44:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:28 Get A/D filter: -9.255963e+061 result=40 03:44:28 Get A/D value=-858993460 result=40 03:44:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:44:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:44:28 Aux= 03:44:28 Message to Camera, serial 92924 queued 03:45:05 Received message from Master: op=PointingHead serial=92937 03:45:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:45:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:45:05 Point started: ret=0 03:45:05 point_skyscan result=0 03:45:06 Check angles 03:45:06 SkyScan query 03:45:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:45:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:45:07 Message to Master queued w/err=0: serial=92937 error=0 03:45:12 Received message from Master: op=Filter serial=92938 03:45:12 Color wheel filter change from 0 to 0 03:45:12 FLIGetFilterPos err=0 currentPosition=0 03:45:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:45:12 Filter is already there-color wheel unchanged 03:45:12 Received message from Master: op=Shutter serial=92939 03:45:12 Shutter LASER close 03:45:12 Received message from Camera: op=State serial=92941 03:45:12 GetSingleValue result=40 Value=cccccccc 03:45:12 SkyScan query 03:45:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:45:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:13 Parameters OK 03:45:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:13 Set A/D data flow result=40 03:45:13 Set A/D channel type result=40 03:45:13 Set A/D encoding result=40 03:45:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:13 Set channel filter=0.000000e+000 result=40 03:45:13 Config A/D Result=40 03:45:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:13 Get A/D filter: -9.255963e+061 result=40 03:45:13 Get A/D value=-858993460 result=40 03:45:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:13 Parameters OK 03:45:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:13 Set A/D data flow result=40 03:45:13 Set A/D channel type result=40 03:45:13 Set A/D encoding result=40 03:45:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:13 Set channel filter=0.000000e+000 result=40 03:45:13 Config A/D Result=40 03:45:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:13 Get A/D filter: -9.255963e+061 result=40 03:45:13 Get A/D value=-858993460 result=40 03:45:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:45:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:45:13 Aux= 03:45:13 Message to Camera, serial 92941 queued 03:45:49 Received message from Master: op=PointingHead serial=92954 03:45:49 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:45:49 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:45:50 Point started: ret=0 03:45:50 point_skyscan result=0 03:45:51 Check angles 03:45:51 SkyScan query 03:45:51 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 03:45:51 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 03:45:51 Check angles 03:45:51 SkyScan query 03:45:52 SkyScan query done: ret=0 az=153.69<-10246 ze=-6.495<-12433 Statuses=0009 0008 03:45:52 Msec=750 True Az=153.69 Ze=-6.495 Az status=0009 Ze status=0008 03:45:52 Check angles 03:45:52 SkyScan query 03:45:53 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 03:45:53 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 03:45:53 Check angles 03:45:53 SkyScan query 03:45:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:45:53 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 03:45:53 Message to Master queued w/err=0: serial=92954 error=0 03:45:58 Received message from Master: op=Filter serial=92955 03:45:58 Color wheel filter change from 0 to 0 03:45:58 FLIGetFilterPos err=0 currentPosition=0 03:45:58 FLIGetStepsRemaining err=0 RemainingSteps=0 03:45:58 Filter is already there-color wheel unchanged 03:45:59 Received message from Master: op=Shutter serial=92956 03:45:59 Shutter LASER close 03:45:59 Received message from Camera: op=State serial=92958 03:45:59 GetSingleValue result=40 Value=cccccccc 03:45:59 SkyScan query 03:45:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:45:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:59 Parameters OK 03:45:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:59 Set A/D data flow result=40 03:45:59 Set A/D channel type result=40 03:45:59 Set A/D encoding result=40 03:45:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:59 Set channel filter=0.000000e+000 result=40 03:45:59 Config A/D Result=40 03:45:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:59 Get A/D filter: -9.255963e+061 result=40 03:45:59 Get A/D value=-858993460 result=40 03:45:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:59 Parameters OK 03:45:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:59 Set A/D data flow result=40 03:45:59 Set A/D channel type result=40 03:45:59 Set A/D encoding result=40 03:45:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:59 Set channel filter=0.000000e+000 result=40 03:45:59 Config A/D Result=40 03:45:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:59 Get A/D filter: -9.255963e+061 result=40 03:45:59 Get A/D value=-858993460 result=40 03:45:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:45:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:45:59 Aux= 03:45:59 Message to Camera, serial 92958 queued 03:46:36 Received message from Master: op=PointingHead serial=92971 03:46:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:46:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:46:36 Point started: ret=0 03:46:36 point_skyscan result=0 03:46:37 Check angles 03:46:37 SkyScan query 03:46:38 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 03:46:38 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 03:46:38 Check angles 03:46:38 SkyScan query 03:46:39 SkyScan query done: ret=0 az=135.165<-9011 ze=6.495<-11567 Statuses=0009 0008 03:46:39 Msec=750 True Az=135.165 Ze=6.495 Az status=0009 Ze status=0008 03:46:39 Check angles 03:46:39 SkyScan query 03:46:39 SkyScan query done: ret=0 az=117.3<-7820 ze=6.495<-11567 Statuses=0009 0008 03:46:39 Msec=1500 True Az=117.3 Ze=6.495 Az status=0009 Ze status=0008 03:46:39 Check angles 03:46:39 SkyScan query 03:46:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:46:40 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:46:40 Message to Master queued w/err=0: serial=92971 error=0 03:46:45 Received message from Master: op=Filter serial=92972 03:46:45 Color wheel filter change from 0 to 0 03:46:45 FLIGetFilterPos err=0 currentPosition=0 03:46:45 FLIGetStepsRemaining err=0 RemainingSteps=0 03:46:45 Filter is already there-color wheel unchanged 03:46:45 Received message from Master: op=Shutter serial=92973 03:46:45 Shutter LASER close 03:46:45 Received message from Camera: op=State serial=92975 03:46:45 GetSingleValue result=40 Value=cccccccc 03:46:45 SkyScan query 03:46:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:46:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:46 Parameters OK 03:46:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:46 Set A/D data flow result=40 03:46:46 Set A/D channel type result=40 03:46:46 Set A/D encoding result=40 03:46:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:46 Set channel filter=0.000000e+000 result=40 03:46:46 Config A/D Result=40 03:46:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:46 Get A/D filter: -9.255963e+061 result=40 03:46:46 Get A/D value=-858993460 result=40 03:46:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:46 Parameters OK 03:46:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:46 Set A/D data flow result=40 03:46:46 Set A/D channel type result=40 03:46:46 Set A/D encoding result=40 03:46:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:46 Set channel filter=0.000000e+000 result=40 03:46:46 Config A/D Result=40 03:46:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:46 Get A/D filter: -9.255963e+061 result=40 03:46:46 Get A/D value=-858993460 result=40 03:46:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:46:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:46:46 Aux= 03:46:46 Message to Camera, serial 92975 queued 03:47:23 Received message from Master: op=PointingHead serial=92988 03:47:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:47:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:47:23 Point started: ret=0 03:47:23 point_skyscan result=0 03:47:24 Check angles 03:47:24 SkyScan query 03:47:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 03:47:24 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 03:47:24 Check angles 03:47:24 SkyScan query 03:47:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.055<-14937 Statuses=0008 0009 03:47:25 Msec=750 True Az=112.995 Ze=-44.055 Az status=0008 Ze status=0009 03:47:25 Check angles 03:47:25 SkyScan query 03:47:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.995<-16333 Statuses=0008 0009 03:47:26 Msec=1500 True Az=112.995 Ze=-64.995 Az status=0008 Ze status=0009 03:47:26 Check angles 03:47:26 SkyScan query 03:47:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.965<-17731 Statuses=0008 0009 03:47:27 Msec=2250 True Az=112.995 Ze=-85.965 Az status=0008 Ze status=0009 03:47:27 Check angles 03:47:27 SkyScan query 03:47:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.89<-19126 Statuses=0008 0009 03:47:27 Msec=3000 True Az=112.995 Ze=-106.89 Az status=0008 Ze status=0009 03:47:27 Check angles 03:47:27 SkyScan query 03:47:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.86<-20524 Statuses=0008 0009 03:47:28 Msec=3750 True Az=112.995 Ze=-127.86 Az status=0008 Ze status=0009 03:47:28 Check angles 03:47:28 SkyScan query 03:47:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.815<-21921 Statuses=0008 0009 03:47:29 Msec=4500 True Az=112.995 Ze=-148.815 Az status=0008 Ze status=0009 03:47:29 Check angles 03:47:29 SkyScan query 03:47:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.755<-23317 Statuses=0008 0009 03:47:30 Msec=5250 True Az=112.995 Ze=-169.755 Az status=0008 Ze status=0009 03:47:30 Check angles 03:47:30 SkyScan query 03:47:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:47:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:47:30 Message to Master queued w/err=0: serial=92988 error=0 03:47:35 Received message from Master: op=Filter serial=92989 03:47:35 Color wheel filter change from 0 to 0 03:47:35 FLIGetFilterPos err=0 currentPosition=0 03:47:35 FLIGetStepsRemaining err=0 RemainingSteps=0 03:47:35 Filter is already there-color wheel unchanged 03:47:35 Received message from Master: op=Shutter serial=92990 03:47:35 Shutter LASER open 03:47:36 Received message from Camera: op=State serial=92992 03:47:36 GetSingleValue result=40 Value=cccccccc 03:47:36 SkyScan query 03:47:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:47:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:36 Parameters OK 03:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:36 Set A/D data flow result=40 03:47:36 Set A/D channel type result=40 03:47:36 Set A/D encoding result=40 03:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:36 Set channel filter=0.000000e+000 result=40 03:47:36 Config A/D Result=40 03:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:36 Get A/D filter: -9.255963e+061 result=40 03:47:36 Get A/D value=-858993460 result=40 03:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:36 Parameters OK 03:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:36 Set A/D data flow result=40 03:47:36 Set A/D channel type result=40 03:47:36 Set A/D encoding result=40 03:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:36 Set channel filter=0.000000e+000 result=40 03:47:36 Config A/D Result=40 03:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:36 Get A/D filter: -9.255963e+061 result=40 03:47:36 Get A/D value=-858993460 result=40 03:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:47:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:47:36 Aux= 03:47:36 Message to Camera, serial 92992 queued 03:47:45 Received message from Master: op=Shutter serial=93002 03:47:45 Shutter LASER close 03:47:45 Received message from Master: op=PointingHead serial=93006 03:47:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:47:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:47:45 Point started: ret=0 03:47:45 point_skyscan result=0 03:47:46 Check angles 03:47:46 SkyScan query 03:47:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 03:47:47 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 03:47:47 Check angles 03:47:47 SkyScan query 03:47:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 03:47:48 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 03:47:48 Check angles 03:47:48 SkyScan query 03:47:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.62<-18708 Statuses=0008 0009 03:47:48 Msec=1500 True Az=112.995 Ze=-100.62 Az status=0008 Ze status=0009 03:47:48 Check angles 03:47:48 SkyScan query 03:47:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.665<-17311 Statuses=0008 0009 03:47:49 Msec=2250 True Az=112.995 Ze=-79.665 Az status=0008 Ze status=0009 03:47:49 Check angles 03:47:49 SkyScan query 03:47:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.71<-15914 Statuses=0008 0009 03:47:50 Msec=3000 True Az=112.995 Ze=-58.71 Az status=0008 Ze status=0009 03:47:50 Check angles 03:47:50 SkyScan query 03:47:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.755<-14517 Statuses=0008 0009 03:47:51 Msec=3750 True Az=112.995 Ze=-37.755 Az status=0008 Ze status=0009 03:47:51 Check angles 03:47:51 SkyScan query 03:47:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.785<-13119 Statuses=0008 0009 03:47:51 Msec=4500 True Az=112.995 Ze=-16.785 Az status=0008 Ze status=0009 03:47:51 Check angles 03:47:51 SkyScan query 03:47:52 SkyScan query done: ret=0 az=112.995<-7533 ze=4.14<-11724 Statuses=0008 0009 03:47:52 Msec=5250 True Az=112.995 Ze=4.14 Az status=0008 Ze status=0009 03:47:52 Check angles 03:47:52 SkyScan query 03:47:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:47:53 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:47:53 Message to Master queued w/err=0: serial=93006 error=0 03:47:58 Received message from Master: op=Filter serial=93007 03:47:58 Color wheel filter change from 0 to 0 03:47:58 FLIGetFilterPos err=0 currentPosition=0 03:47:58 FLIGetStepsRemaining err=0 RemainingSteps=0 03:47:58 Filter is already there-color wheel unchanged 03:47:58 Received message from Master: op=Shutter serial=93008 03:47:58 Shutter LASER close 03:47:58 Received message from Camera: op=State serial=93010 03:47:58 GetSingleValue result=40 Value=cccccccc 03:47:58 SkyScan query 03:47:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:47:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:59 Parameters OK 03:47:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:59 Set A/D data flow result=40 03:47:59 Set A/D channel type result=40 03:47:59 Set A/D encoding result=40 03:47:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:59 Set channel filter=0.000000e+000 result=40 03:47:59 Config A/D Result=40 03:47:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:59 Get A/D filter: -9.255963e+061 result=40 03:47:59 Get A/D value=-858993460 result=40 03:47:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:59 Parameters OK 03:47:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:59 Set A/D data flow result=40 03:47:59 Set A/D channel type result=40 03:47:59 Set A/D encoding result=40 03:47:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:59 Set channel filter=0.000000e+000 result=40 03:47:59 Config A/D Result=40 03:47:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:59 Get A/D filter: -9.255963e+061 result=40 03:47:59 Get A/D value=-858993460 result=40 03:47:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:47:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:47:59 Aux= 03:47:59 Message to Camera, serial 93010 queued 03:48:36 Received message from Master: op=PointingHead serial=93023 03:48:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:48:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:48:36 Point started: ret=0 03:48:36 point_skyscan result=0 03:48:37 Check angles 03:48:37 SkyScan query 03:48:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:48:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:48:37 Message to Master queued w/err=0: serial=93023 error=0 03:48:42 Received message from Master: op=Filter serial=93024 03:48:42 Color wheel filter change from 0 to 0 03:48:42 FLIGetFilterPos err=0 currentPosition=0 03:48:42 FLIGetStepsRemaining err=0 RemainingSteps=0 03:48:42 Filter is already there-color wheel unchanged 03:48:42 Received message from Master: op=Shutter serial=93025 03:48:42 Shutter LASER close 03:48:42 Received message from Camera: op=State serial=93027 03:48:42 GetSingleValue result=40 Value=cccccccc 03:48:42 SkyScan query 03:48:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:48:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:43 Parameters OK 03:48:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:43 Set A/D data flow result=40 03:48:43 Set A/D channel type result=40 03:48:43 Set A/D encoding result=40 03:48:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:43 Set channel filter=0.000000e+000 result=40 03:48:43 Config A/D Result=40 03:48:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:43 Get A/D filter: -9.255963e+061 result=40 03:48:43 Get A/D value=-858993460 result=40 03:48:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:43 Parameters OK 03:48:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:43 Set A/D data flow result=40 03:48:43 Set A/D channel type result=40 03:48:43 Set A/D encoding result=40 03:48:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:43 Set channel filter=0.000000e+000 result=40 03:48:43 Config A/D Result=40 03:48:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:43 Get A/D filter: -9.255963e+061 result=40 03:48:43 Get A/D value=-858993460 result=40 03:48:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:48:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:48:43 Aux= 03:48:43 Message to Camera, serial 93027 queued 03:49:20 Received message from Master: op=PointingHead serial=93040 03:49:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:49:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:49:20 Point started: ret=0 03:49:20 point_skyscan result=0 03:49:21 Check angles 03:49:21 SkyScan query 03:49:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:49:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:49:21 Message to Master queued w/err=0: serial=93040 error=0 03:49:26 Received message from Master: op=Filter serial=93041 03:49:26 Color wheel filter change from 0 to 0 03:49:26 FLIGetFilterPos err=0 currentPosition=0 03:49:26 FLIGetStepsRemaining err=0 RemainingSteps=0 03:49:26 Filter is already there-color wheel unchanged 03:49:27 Received message from Master: op=Shutter serial=93042 03:49:27 Shutter LASER close 03:49:27 Received message from Camera: op=State serial=93044 03:49:27 GetSingleValue result=40 Value=cccccccc 03:49:27 SkyScan query 03:49:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:49:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:27 Parameters OK 03:49:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:27 Set A/D data flow result=40 03:49:27 Set A/D channel type result=40 03:49:27 Set A/D encoding result=40 03:49:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:27 Set channel filter=0.000000e+000 result=40 03:49:27 Config A/D Result=40 03:49:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:27 Get A/D filter: -9.255963e+061 result=40 03:49:27 Get A/D value=-858993460 result=40 03:49:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:27 Parameters OK 03:49:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:27 Set A/D data flow result=40 03:49:27 Set A/D channel type result=40 03:49:27 Set A/D encoding result=40 03:49:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:27 Set channel filter=0.000000e+000 result=40 03:49:27 Config A/D Result=40 03:49:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:27 Get A/D filter: -9.255963e+061 result=40 03:49:27 Get A/D value=-858993460 result=40 03:49:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:49:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:49:27 Aux= 03:49:27 Message to Camera, serial 93044 queued 03:50:04 Received message from Master: op=PointingHead serial=93057 03:50:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:50:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:50:04 Point started: ret=0 03:50:04 point_skyscan result=0 03:50:05 Check angles 03:50:05 SkyScan query 03:50:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:50:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:50:06 Message to Master queued w/err=0: serial=93057 error=0 03:50:11 Received message from Master: op=Filter serial=93058 03:50:11 Color wheel filter change from 0 to 0 03:50:11 FLIGetFilterPos err=0 currentPosition=0 03:50:11 FLIGetStepsRemaining err=0 RemainingSteps=0 03:50:11 Filter is already there-color wheel unchanged 03:50:11 Received message from Master: op=Shutter serial=93059 03:50:11 Shutter LASER close 03:50:11 Received message from Camera: op=State serial=93061 03:50:11 GetSingleValue result=40 Value=cccccccc 03:50:11 SkyScan query 03:50:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:50:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:12 Parameters OK 03:50:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:12 Set A/D data flow result=40 03:50:12 Set A/D channel type result=40 03:50:12 Set A/D encoding result=40 03:50:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:12 Set channel filter=0.000000e+000 result=40 03:50:12 Config A/D Result=40 03:50:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:12 Get A/D filter: -9.255963e+061 result=40 03:50:12 Get A/D value=-858993460 result=40 03:50:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:12 Parameters OK 03:50:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:12 Set A/D data flow result=40 03:50:12 Set A/D channel type result=40 03:50:12 Set A/D encoding result=40 03:50:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:12 Set channel filter=0.000000e+000 result=40 03:50:12 Config A/D Result=40 03:50:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:12 Get A/D filter: -9.255963e+061 result=40 03:50:12 Get A/D value=-858993460 result=40 03:50:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:50:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:50:12 Aux= 03:50:12 Message to Camera, serial 93061 queued 03:50:48 Received message from Master: op=PointingHead serial=93074 03:50:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:50:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:50:49 Point started: ret=0 03:50:49 point_skyscan result=0 03:50:50 Check angles 03:50:50 SkyScan query 03:50:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 03:50:50 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 03:50:50 Check angles 03:50:50 SkyScan query 03:50:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 03:50:51 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 03:50:51 Check angles 03:50:51 SkyScan query 03:50:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.73<-16382 Statuses=0008 0009 03:50:52 Msec=1500 True Az=112.995 Ze=-65.73 Az status=0008 Ze status=0009 03:50:52 Check angles 03:50:52 SkyScan query 03:50:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 03:50:52 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 03:50:53 Check angles 03:50:53 SkyScan query 03:50:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.075<-19205 Statuses=0008 0009 03:50:53 Msec=3000 True Az=112.995 Ze=-108.075 Az status=0008 Ze status=0009 03:50:53 Check angles 03:50:53 SkyScan query 03:50:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.015<-20601 Statuses=0008 0009 03:50:54 Msec=3750 True Az=112.995 Ze=-129.015 Az status=0008 Ze status=0009 03:50:54 Check angles 03:50:54 SkyScan query 03:50:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.97<-21998 Statuses=0008 0009 03:50:55 Msec=4500 True Az=112.995 Ze=-149.97 Az status=0008 Ze status=0009 03:50:55 Check angles 03:50:55 SkyScan query 03:50:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.18<-23412 Statuses=0008 0009 03:50:55 Msec=5250 True Az=112.995 Ze=-171.18 Az status=0008 Ze status=0009 03:50:56 Check angles 03:50:56 SkyScan query 03:50:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:50:56 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:50:56 Message to Master queued w/err=0: serial=93074 error=0 03:51:01 Received message from Master: op=Filter serial=93075 03:51:01 Color wheel filter change from 0 to 0 03:51:01 FLIGetFilterPos err=0 currentPosition=0 03:51:01 FLIGetStepsRemaining err=0 RemainingSteps=0 03:51:01 Filter is already there-color wheel unchanged 03:51:01 Received message from Master: op=Shutter serial=93076 03:51:01 Shutter LASER open 03:51:02 Received message from Camera: op=State serial=93078 03:51:02 GetSingleValue result=40 Value=cccccccc 03:51:02 SkyScan query 03:51:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:51:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:02 Parameters OK 03:51:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:02 Set A/D data flow result=40 03:51:02 Set A/D channel type result=40 03:51:02 Set A/D encoding result=40 03:51:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:02 Set channel filter=0.000000e+000 result=40 03:51:02 Config A/D Result=40 03:51:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:02 Get A/D filter: -9.255963e+061 result=40 03:51:02 Get A/D value=-858993460 result=40 03:51:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:02 Parameters OK 03:51:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:02 Set A/D data flow result=40 03:51:02 Set A/D channel type result=40 03:51:02 Set A/D encoding result=40 03:51:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:02 Set channel filter=0.000000e+000 result=40 03:51:02 Config A/D Result=40 03:51:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:02 Get A/D filter: -9.255963e+061 result=40 03:51:02 Get A/D value=-858993460 result=40 03:51:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:51:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:51:02 Aux= 03:51:02 Message to Camera, serial 93078 queued 03:51:11 Received message from Master: op=Shutter serial=93088 03:51:11 Shutter LASER close 03:51:11 Received message from Master: op=PointingHead serial=93092 03:51:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:51:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:51:12 Point started: ret=0 03:51:12 point_skyscan result=0 03:51:12 Check angles 03:51:12 SkyScan query 03:51:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.74<-21516 Statuses=0008 0009 03:51:13 Msec=0 True Az=112.995 Ze=-142.74 Az status=0008 Ze status=0009 03:51:13 Check angles 03:51:13 SkyScan query 03:51:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 03:51:14 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 03:51:14 Check angles 03:51:14 SkyScan query 03:51:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.395<-18693 Statuses=0008 0009 03:51:14 Msec=1500 True Az=112.995 Ze=-100.395 Az status=0008 Ze status=0009 03:51:15 Check angles 03:51:15 SkyScan query 03:51:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.425<-17295 Statuses=0008 0009 03:51:15 Msec=2250 True Az=112.995 Ze=-79.425 Az status=0008 Ze status=0009 03:51:15 Check angles 03:51:15 SkyScan query 03:51:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.455<-15897 Statuses=0008 0009 03:51:16 Msec=3000 True Az=112.995 Ze=-58.455 Az status=0008 Ze status=0009 03:51:16 Check angles 03:51:16 SkyScan query 03:51:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.095<-14473 Statuses=0008 0009 03:51:17 Msec=3750 True Az=112.995 Ze=-37.095 Az status=0008 Ze status=0009 03:51:17 Check angles 03:51:17 SkyScan query 03:51:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.675<-13045 Statuses=0008 0009 03:51:17 Msec=4500 True Az=112.995 Ze=-15.675 Az status=0008 Ze status=0009 03:51:18 Check angles 03:51:18 SkyScan query 03:51:18 SkyScan query done: ret=0 az=112.995<-7533 ze=4.995<-11667 Statuses=0008 0009 03:51:18 Msec=5250 True Az=112.995 Ze=4.995 Az status=0008 Ze status=0009 03:51:18 Check angles 03:51:18 SkyScan query 03:51:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:51:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:51:19 Message to Master queued w/err=0: serial=93092 error=0 03:51:24 Received message from Master: op=Filter serial=93093 03:51:24 Color wheel filter change from 0 to 0 03:51:24 FLIGetFilterPos err=0 currentPosition=0 03:51:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:51:24 Filter is already there-color wheel unchanged 03:51:24 Received message from Master: op=Shutter serial=93094 03:51:24 Shutter LASER close 03:51:24 Received message from Camera: op=State serial=93096 03:51:24 GetSingleValue result=40 Value=cccccccc 03:51:24 SkyScan query 03:51:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:51:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:25 Parameters OK 03:51:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:25 Set A/D data flow result=40 03:51:25 Set A/D channel type result=40 03:51:25 Set A/D encoding result=40 03:51:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:25 Set channel filter=0.000000e+000 result=40 03:51:25 Config A/D Result=40 03:51:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:25 Get A/D filter: -9.255963e+061 result=40 03:51:25 Get A/D value=-858993460 result=40 03:51:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:25 Parameters OK 03:51:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:25 Set A/D data flow result=40 03:51:25 Set A/D channel type result=40 03:51:25 Set A/D encoding result=40 03:51:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:25 Set channel filter=0.000000e+000 result=40 03:51:25 Config A/D Result=40 03:51:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:25 Get A/D filter: -9.255963e+061 result=40 03:51:25 Get A/D value=-858993460 result=40 03:51:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:51:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:51:25 Aux= 03:51:25 Message to Camera, serial 93096 queued 03:52:01 Received message from Master: op=PointingHead serial=93108 03:52:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:52:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:52:01 Point started: ret=0 03:52:01 point_skyscan result=0 03:52:02 Check angles 03:52:02 SkyScan query 03:52:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:52:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:52:02 Message to Master queued w/err=0: serial=93108 error=0 03:52:07 Received message from Master: op=Filter serial=93109 03:52:07 Color wheel filter change from 0 to 0 03:52:07 FLIGetFilterPos err=0 currentPosition=0 03:52:07 FLIGetStepsRemaining err=0 RemainingSteps=0 03:52:07 Filter is already there-color wheel unchanged 03:52:08 Received message from Master: op=Shutter serial=93110 03:52:08 Shutter LASER close 03:52:08 Received message from Camera: op=State serial=93112 03:52:08 GetSingleValue result=40 Value=cccccccc 03:52:08 SkyScan query 03:52:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:52:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:08 Parameters OK 03:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:08 Set A/D data flow result=40 03:52:08 Set A/D channel type result=40 03:52:08 Set A/D encoding result=40 03:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:08 Set channel filter=0.000000e+000 result=40 03:52:08 Config A/D Result=40 03:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:08 Get A/D filter: -9.255963e+061 result=40 03:52:08 Get A/D value=-858993460 result=40 03:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:08 Parameters OK 03:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:08 Set A/D data flow result=40 03:52:08 Set A/D channel type result=40 03:52:08 Set A/D encoding result=40 03:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:08 Set channel filter=0.000000e+000 result=40 03:52:08 Config A/D Result=40 03:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:08 Get A/D filter: -9.255963e+061 result=40 03:52:08 Get A/D value=-858993460 result=40 03:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:52:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:52:08 Aux= 03:52:08 Message to Camera, serial 93112 queued 03:52:45 Received message from Master: op=PointingHead serial=93125 03:52:45 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:52:45 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:52:45 Point started: ret=0 03:52:45 point_skyscan result=0 03:52:46 Check angles 03:52:46 SkyScan query 03:52:47 SkyScan query done: ret=0 az=136.17<-9078 ze=-6.51<-12434 Statuses=0009 0008 03:52:47 Msec=0 True Az=136.17 Ze=-6.51 Az status=0009 Ze status=0008 03:52:47 Check angles 03:52:47 SkyScan query 03:52:47 SkyScan query done: ret=0 az=153.615<-10241 ze=-6.495<-12433 Statuses=0009 0008 03:52:47 Msec=750 True Az=153.615 Ze=-6.495 Az status=0009 Ze status=0008 03:52:48 Check angles 03:52:48 SkyScan query 03:52:48 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 03:52:48 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 03:52:48 Check angles 03:52:48 SkyScan query 03:52:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:52:49 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 03:52:49 Message to Master queued w/err=0: serial=93125 error=0 03:52:54 Received message from Master: op=Filter serial=93126 03:52:54 Color wheel filter change from 0 to 0 03:52:54 FLIGetFilterPos err=0 currentPosition=0 03:52:54 FLIGetStepsRemaining err=0 RemainingSteps=0 03:52:54 Filter is already there-color wheel unchanged 03:52:54 Received message from Master: op=Shutter serial=93127 03:52:54 Shutter LASER close 03:52:54 Received message from Camera: op=State serial=93129 03:52:54 GetSingleValue result=40 Value=cccccccc 03:52:54 SkyScan query 03:52:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:52:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:55 Parameters OK 03:52:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:55 Set A/D data flow result=40 03:52:55 Set A/D channel type result=40 03:52:55 Set A/D encoding result=40 03:52:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:55 Set channel filter=0.000000e+000 result=40 03:52:55 Config A/D Result=40 03:52:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:55 Get A/D filter: -9.255963e+061 result=40 03:52:55 Get A/D value=-858993460 result=40 03:52:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:55 Parameters OK 03:52:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:55 Set A/D data flow result=40 03:52:55 Set A/D channel type result=40 03:52:55 Set A/D encoding result=40 03:52:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:55 Set channel filter=0.000000e+000 result=40 03:52:55 Config A/D Result=40 03:52:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:55 Get A/D filter: -9.255963e+061 result=40 03:52:55 Get A/D value=-858993460 result=40 03:52:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:52:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:52:55 Aux= 03:52:55 Message to Camera, serial 93129 queued 03:53:32 Received message from Master: op=PointingHead serial=93142 03:53:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:53:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:53:32 Point started: ret=0 03:53:32 point_skyscan result=0 03:53:33 Check angles 03:53:33 SkyScan query 03:53:33 SkyScan query done: ret=0 az=152.895<-10193 ze=6.51<-11566 Statuses=0009 0008 03:53:33 Msec=0 True Az=152.895 Ze=6.51 Az status=0009 Ze status=0008 03:53:33 Check angles 03:53:33 SkyScan query 03:53:34 SkyScan query done: ret=0 az=135.42<-9028 ze=6.495<-11567 Statuses=0009 0008 03:53:34 Msec=750 True Az=135.42 Ze=6.495 Az status=0009 Ze status=0008 03:53:34 Check angles 03:53:34 SkyScan query 03:53:35 SkyScan query done: ret=0 az=117.96<-7864 ze=6.495<-11567 Statuses=0009 0008 03:53:35 Msec=1500 True Az=117.96 Ze=6.495 Az status=0009 Ze status=0008 03:53:35 Check angles 03:53:35 SkyScan query 03:53:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:53:35 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:53:35 Message to Master queued w/err=0: serial=93142 error=0 03:53:40 Received message from Master: op=Filter serial=93143 03:53:40 Color wheel filter change from 0 to 0 03:53:40 FLIGetFilterPos err=0 currentPosition=0 03:53:40 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:40 Filter is already there-color wheel unchanged 03:53:41 Received message from Master: op=Shutter serial=93144 03:53:41 Shutter LASER close 03:53:41 Received message from Camera: op=State serial=93146 03:53:41 GetSingleValue result=40 Value=cccccccc 03:53:41 SkyScan query 03:53:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:53:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:41 Parameters OK 03:53:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:41 Set A/D data flow result=40 03:53:41 Set A/D channel type result=40 03:53:41 Set A/D encoding result=40 03:53:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:41 Set channel filter=0.000000e+000 result=40 03:53:41 Config A/D Result=40 03:53:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:41 Get A/D filter: -9.255963e+061 result=40 03:53:41 Get A/D value=-858993460 result=40 03:53:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:41 Parameters OK 03:53:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:41 Set A/D data flow result=40 03:53:41 Set A/D channel type result=40 [UTC 2019-3-4 03:53:41] 03:53:41 Set A/D encoding result=40 03:53:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:41 Set channel filter=0.000000e+000 result=40 03:53:41 Config A/D Result=40 03:53:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:41 Get A/D filter: -9.255963e+061 result=40 03:53:41 Get A/D value=-858993460 result=40 03:53:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:41 Aux= 03:53:41 Message to Camera, serial 93146 queued 03:54:18 Received message from Master: op=PointingHead serial=93159 03:54:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:54:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:54:18 Point started: ret=0 03:54:18 point_skyscan result=0 03:54:19 Check angles 03:54:19 SkyScan query 03:54:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.4<-13560 Statuses=0008 0009 03:54:20 Msec=0 True Az=112.995 Ze=-23.4 Az status=0008 Ze status=0009 03:54:20 Check angles 03:54:20 SkyScan query 03:54:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.385<-14959 Statuses=0008 0009 03:54:21 Msec=750 True Az=112.995 Ze=-44.385 Az status=0008 Ze status=0009 03:54:21 Check angles 03:54:21 SkyScan query 03:54:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.325<-16355 Statuses=0008 0009 03:54:21 Msec=1500 True Az=112.995 Ze=-65.325 Az status=0008 Ze status=0009 03:54:21 Check angles 03:54:21 SkyScan query 03:54:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.295<-17753 Statuses=0008 0009 03:54:22 Msec=2250 True Az=112.995 Ze=-86.295 Az status=0008 Ze status=0009 03:54:22 Check angles 03:54:22 SkyScan query 03:54:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.22<-19148 Statuses=0008 0009 03:54:23 Msec=3000 True Az=112.995 Ze=-107.22 Az status=0008 Ze status=0009 03:54:23 Check angles 03:54:23 SkyScan query 03:54:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.175<-20545 Statuses=0008 0009 03:54:24 Msec=3750 True Az=112.995 Ze=-128.175 Az status=0008 Ze status=0009 03:54:24 Check angles 03:54:24 SkyScan query 03:54:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.115<-21941 Statuses=0008 0009 03:54:24 Msec=4500 True Az=112.995 Ze=-149.115 Az status=0008 Ze status=0009 03:54:24 Check angles 03:54:24 SkyScan query 03:54:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.055<-23337 Statuses=0008 0009 03:54:25 Msec=5250 True Az=112.995 Ze=-170.055 Az status=0008 Ze status=0009 03:54:25 Check angles 03:54:25 SkyScan query 03:54:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:54:26 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:54:26 Message to Master queued w/err=0: serial=93159 error=0 03:54:31 Received message from Master: op=Filter serial=93160 03:54:31 Color wheel filter change from 0 to 0 03:54:31 FLIGetFilterPos err=0 currentPosition=0 03:54:31 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:31 Filter is already there-color wheel unchanged 03:54:31 Received message from Master: op=Shutter serial=93161 03:54:31 Shutter LASER open 03:54:31 Received message from Camera: op=State serial=93163 03:54:31 GetSingleValue result=40 Value=cccccccc 03:54:31 SkyScan query 03:54:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:54:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:32 Parameters OK 03:54:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:32 Set A/D data flow result=40 03:54:32 Set A/D channel type result=40 03:54:32 Set A/D encoding result=40 03:54:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:32 Set channel filter=0.000000e+000 result=40 03:54:32 Config A/D Result=40 03:54:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:32 Get A/D filter: -9.255963e+061 result=40 03:54:32 Get A/D value=-858993460 result=40 03:54:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:32 Parameters OK 03:54:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:32 Set A/D data flow result=40 03:54:32 Set A/D channel type result=40 03:54:32 Set A/D encoding result=40 03:54:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:32 Set channel filter=0.000000e+000 result=40 03:54:32 Config A/D Result=40 03:54:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:32 Get A/D filter: -9.255963e+061 result=40 03:54:32 Get A/D value=-858993460 result=40 03:54:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:32 Aux= 03:54:32 Message to Camera, serial 93163 queued 03:54:40 Received message from Master: op=Shutter serial=93173 03:54:40 Shutter LASER close 03:54:41 Received message from Master: op=PointingHead serial=93177 03:54:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:54:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:54:41 Point started: ret=0 03:54:41 point_skyscan result=0 03:54:42 Check angles 03:54:42 SkyScan query 03:54:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.74<-21516 Statuses=0008 0009 03:54:42 Msec=0 True Az=112.995 Ze=-142.74 Az status=0008 Ze status=0009 03:54:42 Check angles 03:54:42 SkyScan query 03:54:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.74<-20116 Statuses=0008 0009 03:54:43 Msec=750 True Az=112.995 Ze=-121.74 Az status=0008 Ze status=0009 03:54:43 Check angles 03:54:43 SkyScan query 03:54:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.815<-18721 Statuses=0008 0009 03:54:44 Msec=1500 True Az=112.995 Ze=-100.815 Az status=0008 Ze status=0009 03:54:44 Check angles 03:54:44 SkyScan query 03:54:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.86<-17324 Statuses=0008 0009 03:54:45 Msec=2250 True Az=112.995 Ze=-79.86 Az status=0008 Ze status=0009 03:54:45 Check angles 03:54:45 SkyScan query 03:54:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.92<-15928 Statuses=0008 0009 03:54:45 Msec=3000 True Az=112.995 Ze=-58.92 Az status=0008 Ze status=0009 03:54:45 Check angles 03:54:45 SkyScan query 03:54:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.95<-14530 Statuses=0008 0009 03:54:46 Msec=3750 True Az=112.995 Ze=-37.95 Az status=0008 Ze status=0009 03:54:46 Check angles 03:54:46 SkyScan query 03:54:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.995<-13133 Statuses=0008 0009 03:54:47 Msec=4500 True Az=112.995 Ze=-16.995 Az status=0008 Ze status=0009 03:54:47 Check angles 03:54:47 SkyScan query 03:54:48 SkyScan query done: ret=0 az=112.995<-7533 ze=3.96<-11736 Statuses=0008 0009 03:54:48 Msec=5250 True Az=112.995 Ze=3.96 Az status=0008 Ze status=0009 03:54:48 Check angles 03:54:48 SkyScan query 03:54:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:54:48 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:54:48 Message to Master queued w/err=0: serial=93177 error=0 03:54:53 Received message from Master: op=Filter serial=93178 03:54:53 Color wheel filter change from 0 to 0 03:54:53 FLIGetFilterPos err=0 currentPosition=0 03:54:53 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:53 Filter is already there-color wheel unchanged 03:54:53 Received message from Master: op=Shutter serial=93179 03:54:53 Shutter LASER close 03:54:54 Received message from Camera: op=State serial=93181 03:54:54 GetSingleValue result=40 Value=cccccccc 03:54:54 SkyScan query 03:54:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:54:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:54 Parameters OK 03:54:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:54 Set A/D data flow result=40 03:54:54 Set A/D channel type result=40 03:54:54 Set A/D encoding result=40 03:54:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:54 Set channel filter=0.000000e+000 result=40 03:54:54 Config A/D Result=40 03:54:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:54 Get A/D filter: -9.255963e+061 result=40 03:54:54 Get A/D value=-858993460 result=40 03:54:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:54 Parameters OK 03:54:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:54 Set A/D data flow result=40 03:54:54 Set A/D channel type result=40 03:54:54 Set A/D encoding result=40 03:54:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:54 Set channel filter=0.000000e+000 result=40 03:54:54 Config A/D Result=40 03:54:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:54 Get A/D filter: -9.255963e+061 result=40 03:54:54 Get A/D value=-858993460 result=40 03:54:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:54 Aux= 03:54:54 Message to Camera, serial 93181 queued 03:55:31 Received message from Master: op=PointingHead serial=93194 03:55:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:55:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:55:31 Point started: ret=0 03:55:31 point_skyscan result=0 03:55:32 Check angles 03:55:32 SkyScan query 03:55:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:55:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:55:33 Message to Master queued w/err=0: serial=93194 error=0 03:55:38 Received message from Master: op=Filter serial=93195 03:55:38 Color wheel filter change from 0 to 0 03:55:38 FLIGetFilterPos err=0 currentPosition=0 03:55:38 FLIGetStepsRemaining err=0 RemainingSteps=0 03:55:38 Filter is already there-color wheel unchanged 03:55:38 Received message from Master: op=Shutter serial=93196 03:55:38 Shutter LASER close 03:55:38 Received message from Camera: op=State serial=93198 03:55:38 GetSingleValue result=40 Value=cccccccc 03:55:38 SkyScan query 03:55:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:55:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:39 Parameters OK 03:55:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:39 Set A/D data flow result=40 03:55:39 Set A/D channel type result=40 03:55:39 Set A/D encoding result=40 03:55:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:39 Set channel filter=0.000000e+000 result=40 03:55:39 Config A/D Result=40 03:55:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:39 Get A/D filter: -9.255963e+061 result=40 03:55:39 Get A/D value=-858993460 result=40 03:55:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:39 Parameters OK 03:55:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:39 Set A/D data flow result=40 03:55:39 Set A/D channel type result=40 03:55:39 Set A/D encoding result=40 03:55:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:39 Set channel filter=0.000000e+000 result=40 03:55:39 Config A/D Result=40 03:55:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:39 Get A/D filter: -9.255963e+061 result=40 03:55:39 Get A/D value=-858993460 result=40 03:55:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:55:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:55:39 Aux= 03:55:39 Message to Camera, serial 93198 queued 03:56:15 Received message from Master: op=PointingHead serial=93211 03:56:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:56:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:56:16 Point started: ret=0 03:56:16 point_skyscan result=0 03:56:17 Check angles 03:56:17 SkyScan query 03:56:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:56:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:56:17 Message to Master queued w/err=0: serial=93211 error=0 03:56:22 Received message from Master: op=Filter serial=93212 03:56:22 Color wheel filter change from 0 to 0 03:56:22 FLIGetFilterPos err=0 currentPosition=0 03:56:22 FLIGetStepsRemaining err=0 RemainingSteps=0 03:56:22 Filter is already there-color wheel unchanged 03:56:22 Received message from Master: op=Shutter serial=93213 03:56:22 Shutter LASER close 03:56:22 Received message from Camera: op=State serial=93215 03:56:22 GetSingleValue result=40 Value=cccccccc 03:56:22 SkyScan query 03:56:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:56:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:23 Parameters OK 03:56:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:23 Set A/D data flow result=40 03:56:23 Set A/D channel type result=40 03:56:23 Set A/D encoding result=40 03:56:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:23 Set channel filter=0.000000e+000 result=40 03:56:23 Config A/D Result=40 03:56:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:23 Get A/D filter: -9.255963e+061 result=40 03:56:23 Get A/D value=-858993460 result=40 03:56:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:23 Parameters OK 03:56:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:23 Set A/D data flow result=40 03:56:23 Set A/D channel type result=40 03:56:23 Set A/D encoding result=40 03:56:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:23 Set channel filter=0.000000e+000 result=40 03:56:23 Config A/D Result=40 03:56:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:23 Get A/D filter: -9.255963e+061 result=40 03:56:23 Get A/D value=-858993460 result=40 03:56:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:56:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:56:23 Aux= 03:56:23 Message to Camera, serial 93215 queued 03:57:00 Received message from Master: op=PointingHead serial=93228 03:57:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:57:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:57:00 Point started: ret=0 03:57:00 point_skyscan result=0 03:57:01 Check angles 03:57:01 SkyScan query 03:57:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:57:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:57:01 Message to Master queued w/err=0: serial=93228 error=0 03:57:06 Received message from Master: op=Filter serial=93229 03:57:06 Color wheel filter change from 0 to 0 03:57:06 FLIGetFilterPos err=0 currentPosition=0 03:57:06 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:06 Filter is already there-color wheel unchanged 03:57:07 Received message from Master: op=Shutter serial=93230 03:57:07 Shutter LASER close 03:57:07 Received message from Camera: op=State serial=93232 03:57:07 GetSingleValue result=40 Value=cccccccc 03:57:07 SkyScan query 03:57:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:57:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:07 Parameters OK 03:57:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:07 Set A/D data flow result=40 03:57:07 Set A/D channel type result=40 03:57:07 Set A/D encoding result=40 03:57:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:07 Set channel filter=0.000000e+000 result=40 03:57:07 Config A/D Result=40 03:57:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:07 Get A/D filter: -9.255963e+061 result=40 03:57:07 Get A/D value=-858993460 result=40 03:57:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:07 Parameters OK 03:57:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:07 Set A/D data flow result=40 03:57:07 Set A/D channel type result=40 03:57:07 Set A/D encoding result=40 03:57:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:07 Set channel filter=0.000000e+000 result=40 03:57:07 Config A/D Result=40 03:57:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:07 Get A/D filter: -9.255963e+061 result=40 03:57:07 Get A/D value=-858993460 result=40 03:57:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:57:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:57:07 Aux= 03:57:07 Message to Camera, serial 93232 queued 03:57:44 Received message from Master: op=PointingHead serial=93245 03:57:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:57:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:57:44 Point started: ret=0 03:57:44 point_skyscan result=0 03:57:45 Check angles 03:57:45 SkyScan query 03:57:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 03:57:46 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 03:57:46 Check angles 03:57:46 SkyScan query 03:57:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 03:57:46 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 03:57:47 Check angles 03:57:47 SkyScan query 03:57:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 03:57:47 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 03:57:47 Check angles 03:57:47 SkyScan query 03:57:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.28<-17752 Statuses=0008 0009 03:57:48 Msec=2250 True Az=112.995 Ze=-86.28 Az status=0008 Ze status=0009 03:57:48 Check angles 03:57:48 SkyScan query 03:57:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.235<-19149 Statuses=0008 0009 03:57:49 Msec=3000 True Az=112.995 Ze=-107.235 Az status=0008 Ze status=0009 03:57:49 Check angles 03:57:49 SkyScan query 03:57:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.19<-20546 Statuses=0008 0009 03:57:49 Msec=3750 True Az=112.995 Ze=-128.19 Az status=0008 Ze status=0009 03:57:50 Check angles 03:57:50 SkyScan query 03:57:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.145<-21943 Statuses=0008 0009 03:57:50 Msec=4500 True Az=112.995 Ze=-149.145 Az status=0008 Ze status=0009 03:57:50 Check angles 03:57:50 SkyScan query 03:57:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.085<-23339 Statuses=0008 0009 03:57:51 Msec=5250 True Az=112.995 Ze=-170.085 Az status=0008 Ze status=0009 03:57:51 Check angles 03:57:51 SkyScan query 03:57:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:57:52 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:57:52 Message to Master queued w/err=0: serial=93245 error=0 03:57:57 Received message from Master: op=Filter serial=93246 03:57:57 Color wheel filter change from 0 to 0 03:57:57 FLIGetFilterPos err=0 currentPosition=0 03:57:57 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:57 Filter is already there-color wheel unchanged 03:57:57 Received message from Master: op=Shutter serial=93247 03:57:57 Shutter LASER open 03:57:57 Received message from Camera: op=State serial=93249 03:57:57 GetSingleValue result=40 Value=cccccccc 03:57:57 SkyScan query 03:57:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:57:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:58 Parameters OK 03:57:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:58 Set A/D data flow result=40 03:57:58 Set A/D channel type result=40 03:57:58 Set A/D encoding result=40 03:57:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:58 Set channel filter=0.000000e+000 result=40 03:57:58 Config A/D Result=40 03:57:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:58 Get A/D filter: -9.255963e+061 result=40 03:57:58 Get A/D value=-858993460 result=40 03:57:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:58 Parameters OK 03:57:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:58 Set A/D data flow result=40 03:57:58 Set A/D channel type result=40 03:57:58 Set A/D encoding result=40 03:57:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:58 Set channel filter=0.000000e+000 result=40 03:57:58 Config A/D Result=40 03:57:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:58 Get A/D filter: -9.255963e+061 result=40 03:57:58 Get A/D value=-858993460 result=40 03:57:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:57:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:57:58 Aux= 03:57:58 Message to Camera, serial 93249 queued 03:58:06 Received message from Master: op=Shutter serial=93259 03:58:06 Shutter LASER close 03:58:07 Received message from Master: op=PointingHead serial=93263 03:58:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:58:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:58:07 Point started: ret=0 03:58:07 point_skyscan result=0 03:58:08 Check angles 03:58:08 SkyScan query 03:58:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 03:58:08 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 03:58:08 Check angles 03:58:08 SkyScan query 03:58:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 03:58:09 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 03:58:09 Check angles 03:58:09 SkyScan query 03:58:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 03:58:10 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 03:58:10 Check angles 03:58:10 SkyScan query 03:58:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.755<-17317 Statuses=0008 0009 03:58:11 Msec=2250 True Az=112.995 Ze=-79.755 Az status=0008 Ze status=0009 03:58:11 Check angles 03:58:11 SkyScan query 03:58:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 03:58:11 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 03:58:11 Check angles 03:58:11 SkyScan query 03:58:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.845<-14523 Statuses=0008 0009 03:58:12 Msec=3750 True Az=112.995 Ze=-37.845 Az status=0008 Ze status=0009 03:58:12 Check angles 03:58:12 SkyScan query 03:58:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.425<-13095 Statuses=0008 0009 03:58:13 Msec=4500 True Az=112.995 Ze=-16.425 Az status=0008 Ze status=0009 03:58:13 Check angles 03:58:13 SkyScan query 03:58:14 SkyScan query done: ret=0 az=112.995<-7533 ze=4.425<-11705 Statuses=0008 0009 03:58:14 Msec=5250 True Az=112.995 Ze=4.425 Az status=0008 Ze status=0009 03:58:14 Check angles 03:58:14 SkyScan query 03:58:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:58:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:58:14 Message to Master queued w/err=0: serial=93263 error=0 03:58:19 Received message from Master: op=Filter serial=93264 03:58:19 Color wheel filter change from 0 to 0 03:58:19 FLIGetFilterPos err=0 currentPosition=0 03:58:19 FLIGetStepsRemaining err=0 RemainingSteps=0 03:58:19 Filter is already there-color wheel unchanged 03:58:19 Received message from Master: op=Shutter serial=93265 03:58:19 Shutter LASER close 03:58:20 Received message from Camera: op=State serial=93267 03:58:20 GetSingleValue result=40 Value=cccccccc 03:58:20 SkyScan query 03:58:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:58:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:20 Parameters OK 03:58:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:20 Set A/D data flow result=40 03:58:20 Set A/D channel type result=40 03:58:20 Set A/D encoding result=40 03:58:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:20 Set channel filter=0.000000e+000 result=40 03:58:20 Config A/D Result=40 03:58:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:20 Get A/D filter: -9.255963e+061 result=40 03:58:20 Get A/D value=-858993460 result=40 03:58:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:20 Parameters OK 03:58:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:20 Set A/D data flow result=40 03:58:20 Set A/D channel type result=40 03:58:20 Set A/D encoding result=40 03:58:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:20 Set channel filter=0.000000e+000 result=40 03:58:20 Config A/D Result=40 03:58:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:20 Get A/D filter: -9.255963e+061 result=40 03:58:20 Get A/D value=-858993460 result=40 03:58:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:58:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:58:20 Aux= 03:58:20 Message to Camera, serial 93267 queued 03:58:57 Received message from Master: op=PointingHead serial=93280 03:58:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:58:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:58:57 Point started: ret=0 03:58:57 point_skyscan result=0 03:58:58 Check angles 03:58:58 SkyScan query 03:58:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:58:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:58:59 Message to Master queued w/err=0: serial=93280 error=0 03:59:04 Received message from Master: op=Filter serial=93281 03:59:04 Color wheel filter change from 0 to 0 03:59:04 FLIGetFilterPos err=0 currentPosition=0 03:59:04 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:04 Filter is already there-color wheel unchanged 03:59:04 Received message from Master: op=Shutter serial=93282 03:59:04 Shutter LASER close 03:59:04 Received message from Camera: op=State serial=93284 03:59:04 GetSingleValue result=40 Value=cccccccc 03:59:04 SkyScan query 03:59:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:59:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:05 Parameters OK 03:59:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:05 Set A/D data flow result=40 03:59:05 Set A/D channel type result=40 03:59:05 Set A/D encoding result=40 03:59:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:05 Set channel filter=0.000000e+000 result=40 03:59:05 Config A/D Result=40 03:59:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:05 Get A/D filter: -9.255963e+061 result=40 03:59:05 Get A/D value=-858993460 result=40 03:59:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:05 Parameters OK 03:59:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:05 Set A/D data flow result=40 03:59:05 Set A/D channel type result=40 03:59:05 Set A/D encoding result=40 03:59:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:05 Set channel filter=0.000000e+000 result=40 03:59:05 Config A/D Result=40 03:59:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:05 Get A/D filter: -9.255963e+061 result=40 03:59:05 Get A/D value=-858993460 result=40 03:59:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:05 Aux= 03:59:05 Message to Camera, serial 93284 queued 03:59:41 Received message from Master: op=PointingHead serial=93297 03:59:41 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:59:41 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:59:42 Point started: ret=0 03:59:42 point_skyscan result=0 03:59:42 Check angles 03:59:42 SkyScan query 03:59:43 SkyScan query done: ret=0 az=136.2<-9080 ze=-6.51<-12434 Statuses=0009 0008 03:59:43 Msec=0 True Az=136.2 Ze=-6.51 Az status=0009 Ze status=0008 03:59:43 Check angles 03:59:43 SkyScan query 03:59:44 SkyScan query done: ret=0 az=153.735<-10249 ze=-6.495<-12433 Statuses=0009 0008 03:59:44 Msec=750 True Az=153.735 Ze=-6.495 Az status=0009 Ze status=0008 03:59:44 Check angles 03:59:44 SkyScan query 03:59:45 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 03:59:45 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 03:59:45 Check angles 03:59:45 SkyScan query 03:59:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:59:45 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 03:59:45 Message to Master queued w/err=0: serial=93297 error=0 03:59:50 Received message from Master: op=Filter serial=93298 03:59:50 Color wheel filter change from 0 to 0 03:59:50 FLIGetFilterPos err=0 currentPosition=0 03:59:50 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:50 Filter is already there-color wheel unchanged 03:59:50 Received message from Master: op=Shutter serial=93299 03:59:50 Shutter LASER close 03:59:50 Received message from Camera: op=State serial=93301 03:59:50 GetSingleValue result=40 Value=cccccccc 03:59:50 SkyScan query 03:59:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:59:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:51 Parameters OK 03:59:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:51 Set A/D data flow result=40 03:59:51 Set A/D channel type result=40 03:59:51 Set A/D encoding result=40 03:59:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:51 Set channel filter=0.000000e+000 result=40 03:59:51 Config A/D Result=40 03:59:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:51 Get A/D filter: -9.255963e+061 result=40 03:59:51 Get A/D value=-858993460 result=40 03:59:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:51 Parameters OK 03:59:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:51 Set A/D data flow result=40 03:59:51 Set A/D channel type result=40 03:59:51 Set A/D encoding result=40 03:59:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:51 Set channel filter=0.000000e+000 result=40 03:59:51 Config A/D Result=40 03:59:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:51 Get A/D filter: -9.255963e+061 result=40 03:59:51 Get A/D value=-858993460 result=40 03:59:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:51 Aux= 03:59:51 Message to Camera, serial 93301 queued 04:00:28 Received message from Master: op=PointingHead serial=93314 04:00:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:00:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:00:28 Point started: ret=0 04:00:28 point_skyscan result=0 04:00:29 Check angles 04:00:29 SkyScan query 04:00:30 SkyScan query done: ret=0 az=152.64<-10176 ze=6.51<-11566 Statuses=0009 0008 04:00:30 Msec=0 True Az=152.64 Ze=6.51 Az status=0009 Ze status=0008 04:00:30 Check angles 04:00:30 SkyScan query 04:00:30 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 04:00:30 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 04:00:31 Check angles 04:00:31 SkyScan query 04:00:31 SkyScan query done: ret=0 az=117.375<-7825 ze=6.495<-11567 Statuses=0009 0008 04:00:31 Msec=1500 True Az=117.375 Ze=6.495 Az status=0009 Ze status=0008 04:00:31 Check angles 04:00:31 SkyScan query 04:00:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:00:32 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:00:32 Message to Master queued w/err=0: serial=93314 error=0 04:00:37 Received message from Master: op=Filter serial=93315 04:00:37 Color wheel filter change from 0 to 0 04:00:37 FLIGetFilterPos err=0 currentPosition=0 04:00:37 FLIGetStepsRemaining err=0 RemainingSteps=0 04:00:37 Filter is already there-color wheel unchanged 04:00:37 Received message from Master: op=Shutter serial=93316 04:00:37 Shutter LASER close 04:00:37 Received message from Camera: op=State serial=93318 04:00:37 GetSingleValue result=40 Value=cccccccc 04:00:37 SkyScan query 04:00:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:00:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:38 Parameters OK 04:00:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:38 Set A/D data flow result=40 04:00:38 Set A/D channel type result=40 04:00:38 Set A/D encoding result=40 04:00:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:38 Set channel filter=0.000000e+000 result=40 04:00:38 Config A/D Result=40 04:00:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:38 Get A/D filter: -9.255963e+061 result=40 04:00:38 Get A/D value=-858993460 result=40 04:00:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:38 Parameters OK 04:00:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:38 Set A/D data flow result=40 04:00:38 Set A/D channel type result=40 04:00:38 Set A/D encoding result=40 04:00:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:38 Set channel filter=0.000000e+000 result=40 04:00:38 Config A/D Result=40 04:00:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:38 Get A/D filter: -9.255963e+061 result=40 04:00:38 Get A/D value=-858993460 result=40 04:00:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:00:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:00:38 Aux= 04:00:38 Message to Camera, serial 93318 queued 04:01:15 Received message from Master: op=PointingHead serial=93331 04:01:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:01:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:01:15 Point started: ret=0 04:01:15 point_skyscan result=0 04:01:16 Check angles 04:01:16 SkyScan query 04:01:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.79<-13586 Statuses=0008 0009 04:01:16 Msec=0 True Az=112.995 Ze=-23.79 Az status=0008 Ze status=0009 04:01:16 Check angles 04:01:16 SkyScan query 04:01:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.655<-14977 Statuses=0008 0009 04:01:17 Msec=750 True Az=112.995 Ze=-44.655 Az status=0008 Ze status=0009 04:01:17 Check angles 04:01:17 SkyScan query 04:01:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.03<-16402 Statuses=0008 0009 04:01:18 Msec=1500 True Az=112.995 Ze=-66.03 Az status=0008 Ze status=0009 04:01:18 Check angles 04:01:18 SkyScan query 04:01:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.97<-17798 Statuses=0008 0009 04:01:18 Msec=2250 True Az=112.995 Ze=-86.97 Az status=0008 Ze status=0009 04:01:19 Check angles 04:01:19 SkyScan query 04:01:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.925<-19195 Statuses=0008 0009 04:01:19 Msec=3000 True Az=112.995 Ze=-107.925 Az status=0008 Ze status=0009 04:01:19 Check angles 04:01:19 SkyScan query 04:01:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.315<-20621 Statuses=0008 0009 04:01:20 Msec=3750 True Az=112.995 Ze=-129.315 Az status=0008 Ze status=0009 04:01:20 Check angles 04:01:20 SkyScan query 04:01:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.285<-22019 Statuses=0008 0009 04:01:21 Msec=4500 True Az=112.995 Ze=-150.285 Az status=0008 Ze status=0009 04:01:21 Check angles 04:01:21 SkyScan query 04:01:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.075<-23405 Statuses=0008 0009 04:01:21 Msec=5250 True Az=112.995 Ze=-171.075 Az status=0008 Ze status=0009 04:01:22 Check angles 04:01:22 SkyScan query 04:01:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:01:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:01:22 Message to Master queued w/err=0: serial=93331 error=0 04:01:27 Received message from Master: op=Filter serial=93332 04:01:27 Color wheel filter change from 0 to 0 04:01:27 FLIGetFilterPos err=0 currentPosition=0 04:01:27 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:27 Filter is already there-color wheel unchanged 04:01:27 Received message from Master: op=Shutter serial=93333 04:01:27 Shutter LASER open 04:01:28 Received message from Camera: op=State serial=93335 04:01:28 GetSingleValue result=40 Value=cccccccc 04:01:28 SkyScan query 04:01:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:01:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:28 Parameters OK 04:01:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:28 Set A/D data flow result=40 04:01:28 Set A/D channel type result=40 04:01:28 Set A/D encoding result=40 04:01:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:28 Set channel filter=0.000000e+000 result=40 04:01:28 Config A/D Result=40 04:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:28 Get A/D filter: -9.255963e+061 result=40 04:01:28 Get A/D value=-858993460 result=40 04:01:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:28 Parameters OK 04:01:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:28 Set A/D data flow result=40 04:01:28 Set A/D channel type result=40 04:01:28 Set A/D encoding result=40 04:01:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:28 Set channel filter=0.000000e+000 result=40 04:01:28 Config A/D Result=40 04:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:28 Get A/D filter: -9.255963e+061 result=40 04:01:28 Get A/D value=-858993460 result=40 04:01:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:28 Aux= 04:01:28 Message to Camera, serial 93335 queued 04:01:37 Received message from Master: op=Shutter serial=93345 04:01:37 Shutter LASER close 04:01:37 Received message from Master: op=PointingHead serial=93349 04:01:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:01:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:01:37 Point started: ret=0 04:01:37 point_skyscan result=0 04:01:38 Check angles 04:01:38 SkyScan query 04:01:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.55<-21570 Statuses=0008 0009 04:01:39 Msec=0 True Az=112.995 Ze=-143.55 Az status=0008 Ze status=0009 04:01:39 Check angles 04:01:39 SkyScan query 04:01:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.61<-20174 Statuses=0008 0009 04:01:39 Msec=750 True Az=112.995 Ze=-122.61 Az status=0008 Ze status=0009 04:01:40 Check angles 04:01:40 SkyScan query 04:01:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.52<-18768 Statuses=0008 0009 04:01:40 Msec=1500 True Az=112.995 Ze=-101.52 Az status=0008 Ze status=0009 04:01:40 Check angles 04:01:40 SkyScan query 04:01:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.655<-17377 Statuses=0008 0009 04:01:41 Msec=2250 True Az=112.995 Ze=-80.655 Az status=0008 Ze status=0009 04:01:41 Check angles 04:01:41 SkyScan query 04:01:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.295<-15953 Statuses=0008 0009 04:01:42 Msec=3000 True Az=112.995 Ze=-59.295 Az status=0008 Ze status=0009 04:01:42 Check angles 04:01:42 SkyScan query 04:01:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.875<-14525 Statuses=0008 0009 04:01:42 Msec=3750 True Az=112.995 Ze=-37.875 Az status=0008 Ze status=0009 04:01:43 Check angles 04:01:43 SkyScan query 04:01:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.92<-13128 Statuses=0008 0009 04:01:43 Msec=4500 True Az=112.995 Ze=-16.92 Az status=0008 Ze status=0009 04:01:43 Check angles 04:01:43 SkyScan query 04:01:44 SkyScan query done: ret=0 az=112.995<-7533 ze=4.02<-11732 Statuses=0008 0009 04:01:44 Msec=5250 True Az=112.995 Ze=4.02 Az status=0008 Ze status=0009 04:01:44 Check angles 04:01:44 SkyScan query 04:01:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:01:45 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:01:45 Message to Master queued w/err=0: serial=93349 error=0 04:01:50 Received message from Master: op=Filter serial=93350 04:01:50 Color wheel filter change from 0 to 0 04:01:50 FLIGetFilterPos err=0 currentPosition=0 04:01:50 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:50 Filter is already there-color wheel unchanged 04:01:50 Received message from Master: op=Shutter serial=93351 04:01:50 Shutter LASER close 04:01:50 Received message from Camera: op=State serial=93353 04:01:50 GetSingleValue result=40 Value=cccccccc 04:01:50 SkyScan query 04:01:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:01:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:51 Parameters OK 04:01:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:51 Set A/D data flow result=40 04:01:51 Set A/D channel type result=40 04:01:51 Set A/D encoding result=40 04:01:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:51 Set channel filter=0.000000e+000 result=40 04:01:51 Config A/D Result=40 04:01:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:51 Get A/D filter: -9.255963e+061 result=40 04:01:51 Get A/D value=-858993460 result=40 04:01:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:51 Parameters OK 04:01:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:51 Set A/D data flow result=40 04:01:51 Set A/D channel type result=40 04:01:51 Set A/D encoding result=40 04:01:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:51 Set channel filter=0.000000e+000 result=40 04:01:51 Config A/D Result=40 04:01:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:51 Get A/D filter: -9.255963e+061 result=40 04:01:51 Get A/D value=-858993460 result=40 04:01:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:51 Aux= 04:01:51 Message to Camera, serial 93353 queued 04:02:27 Received message from Master: op=PointingHead serial=93366 04:02:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:02:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:02:28 Point started: ret=0 04:02:28 point_skyscan result=0 04:02:29 Check angles 04:02:29 SkyScan query 04:02:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:02:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:02:29 Message to Master queued w/err=0: serial=93366 error=0 04:02:34 Received message from Master: op=Filter serial=93367 04:02:34 Color wheel filter change from 0 to 0 04:02:34 FLIGetFilterPos err=0 currentPosition=0 04:02:34 FLIGetStepsRemaining err=0 RemainingSteps=0 04:02:34 Filter is already there-color wheel unchanged 04:02:34 Received message from Master: op=Shutter serial=93368 04:02:34 Shutter LASER close 04:02:34 Received message from Camera: op=State serial=93370 04:02:34 GetSingleValue result=40 Value=cccccccc 04:02:34 SkyScan query 04:02:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:02:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:35 Parameters OK 04:02:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:35 Set A/D data flow result=40 04:02:35 Set A/D channel type result=40 04:02:35 Set A/D encoding result=40 04:02:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:35 Set channel filter=0.000000e+000 result=40 04:02:35 Config A/D Result=40 04:02:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:35 Get A/D filter: -9.255963e+061 result=40 04:02:35 Get A/D value=-858993460 result=40 04:02:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:35 Parameters OK 04:02:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:35 Set A/D data flow result=40 04:02:35 Set A/D channel type result=40 04:02:35 Set A/D encoding result=40 04:02:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:35 Set channel filter=0.000000e+000 result=40 04:02:35 Config A/D Result=40 04:02:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:35 Get A/D filter: -9.255963e+061 result=40 04:02:35 Get A/D value=-858993460 result=40 04:02:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:02:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:02:35 Aux= 04:02:35 Message to Camera, serial 93370 queued 04:03:12 Received message from Master: op=PointingHead serial=93383 04:03:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:03:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:03:12 Point started: ret=0 04:03:12 point_skyscan result=0 04:03:13 Check angles 04:03:13 SkyScan query 04:03:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:03:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:03:13 Message to Master queued w/err=0: serial=93383 error=0 04:03:18 Received message from Master: op=Filter serial=93384 04:03:18 Color wheel filter change from 0 to 0 04:03:18 FLIGetFilterPos err=0 currentPosition=0 04:03:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:03:18 Filter is already there-color wheel unchanged 04:03:19 Received message from Master: op=Shutter serial=93385 04:03:19 Shutter LASER close 04:03:19 Received message from Camera: op=State serial=93387 04:03:19 GetSingleValue result=40 Value=cccccccc 04:03:19 SkyScan query 04:03:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:03:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:19 Parameters OK 04:03:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:19 Set A/D data flow result=40 04:03:19 Set A/D channel type result=40 04:03:19 Set A/D encoding result=40 04:03:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:19 Set channel filter=0.000000e+000 result=40 04:03:19 Config A/D Result=40 04:03:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:19 Get A/D filter: -9.255963e+061 result=40 04:03:19 Get A/D value=-858993460 result=40 04:03:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:19 Parameters OK 04:03:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:19 Set A/D data flow result=40 04:03:19 Set A/D channel type result=40 04:03:19 Set A/D encoding result=40 04:03:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:19 Set channel filter=0.000000e+000 result=40 04:03:19 Config A/D Result=40 04:03:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:19 Get A/D filter: -9.255963e+061 result=40 04:03:19 Get A/D value=-858993460 result=40 04:03:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:03:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:03:19 Aux= 04:03:19 Message to Camera, serial 93387 queued 04:03:38 Received message from Master: op=Identify serial=93388 [UTC 2019-3-4 04:03:50] 04:03:56 Received message from Master: op=PointingHead serial=93403 04:03:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:03:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:03:56 Point started: ret=0 04:03:56 point_skyscan result=0 04:03:57 Check angles 04:03:57 SkyScan query 04:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:03:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:03:58 Message to Master queued w/err=0: serial=93403 error=0 04:04:03 Received message from Master: op=Filter serial=93404 04:04:03 Color wheel filter change from 0 to 0 04:04:03 FLIGetFilterPos err=0 currentPosition=0 04:04:03 FLIGetStepsRemaining err=0 RemainingSteps=0 04:04:03 Filter is already there-color wheel unchanged 04:04:03 Received message from Master: op=Shutter serial=93405 04:04:03 Shutter LASER close 04:04:03 Received message from Camera: op=State serial=93407 04:04:03 GetSingleValue result=40 Value=cccccccc 04:04:03 SkyScan query 04:04:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:04:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:04 Parameters OK 04:04:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:04 Set A/D data flow result=40 04:04:04 Set A/D channel type result=40 04:04:04 Set A/D encoding result=40 04:04:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:04 Set channel filter=0.000000e+000 result=40 04:04:04 Config A/D Result=40 04:04:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:04 Get A/D filter: -9.255963e+061 result=40 04:04:04 Get A/D value=-858993460 result=40 04:04:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:04 Parameters OK 04:04:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:04 Set A/D data flow result=40 04:04:04 Set A/D channel type result=40 04:04:04 Set A/D encoding result=40 04:04:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:04 Set channel filter=0.000000e+000 result=40 04:04:04 Config A/D Result=40 04:04:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:04 Get A/D filter: -9.255963e+061 result=40 04:04:04 Get A/D value=-858993460 result=40 04:04:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:04:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:04:04 Aux= 04:04:04 Message to Camera, serial 93407 queued 04:04:40 Received message from Master: op=PointingHead serial=93420 04:04:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:04:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:04:41 Point started: ret=0 04:04:41 point_skyscan result=0 04:04:42 Check angles 04:04:42 SkyScan query 04:04:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.22<-13548 Statuses=0008 0009 04:04:42 Msec=0 True Az=112.995 Ze=-23.22 Az status=0008 Ze status=0009 04:04:42 Check angles 04:04:42 SkyScan query 04:04:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.205<-14947 Statuses=0008 0009 04:04:43 Msec=750 True Az=112.995 Ze=-44.205 Az status=0008 Ze status=0009 04:04:43 Check angles 04:04:43 SkyScan query 04:04:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.16<-16344 Statuses=0008 0009 04:04:44 Msec=1500 True Az=112.995 Ze=-65.16 Az status=0008 Ze status=0009 04:04:44 Check angles 04:04:44 SkyScan query 04:04:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.55<-17770 Statuses=0008 0009 04:04:44 Msec=2250 True Az=112.995 Ze=-86.55 Az status=0008 Ze status=0009 04:04:45 Check angles 04:04:45 SkyScan query 04:04:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.505<-19167 Statuses=0008 0009 04:04:45 Msec=3000 True Az=112.995 Ze=-107.505 Az status=0008 Ze status=0009 04:04:45 Check angles 04:04:45 SkyScan query 04:04:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.445<-20563 Statuses=0008 0009 04:04:46 Msec=3750 True Az=112.995 Ze=-128.445 Az status=0008 Ze status=0009 04:04:46 Check angles 04:04:46 SkyScan query 04:04:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 04:04:47 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 04:04:47 Check angles 04:04:47 SkyScan query 04:04:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.73<-23382 Statuses=0008 0009 04:04:47 Msec=5250 True Az=112.995 Ze=-170.73 Az status=0008 Ze status=0009 04:04:48 Check angles 04:04:48 SkyScan query 04:04:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:04:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:04:48 Message to Master queued w/err=0: serial=93420 error=0 04:04:53 Received message from Master: op=Filter serial=93421 04:04:53 Color wheel filter change from 0 to 0 04:04:53 FLIGetFilterPos err=0 currentPosition=0 04:04:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:04:53 Filter is already there-color wheel unchanged 04:04:53 Received message from Master: op=Shutter serial=93422 04:04:53 Shutter LASER open 04:04:53 Received message from Camera: op=State serial=93424 04:04:53 GetSingleValue result=40 Value=cccccccc 04:04:53 SkyScan query 04:04:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:04:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:54 Parameters OK 04:04:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:54 Set A/D data flow result=40 04:04:54 Set A/D channel type result=40 04:04:54 Set A/D encoding result=40 04:04:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:54 Set channel filter=0.000000e+000 result=40 04:04:54 Config A/D Result=40 04:04:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:54 Get A/D filter: -9.255963e+061 result=40 04:04:54 Get A/D value=-858993460 result=40 04:04:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:54 Parameters OK 04:04:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:54 Set A/D data flow result=40 04:04:54 Set A/D channel type result=40 04:04:54 Set A/D encoding result=40 04:04:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:54 Set channel filter=0.000000e+000 result=40 04:04:54 Config A/D Result=40 04:04:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:54 Get A/D filter: -9.255963e+061 result=40 04:04:54 Get A/D value=-858993460 result=40 04:04:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:04:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:04:54 Aux= 04:04:54 Message to Camera, serial 93424 queued 04:05:02 Received message from Master: op=Shutter serial=93434 04:05:02 Shutter LASER close 04:05:03 Received message from Master: op=PointingHead serial=93438 04:05:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:05:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:05:03 Point started: ret=0 04:05:03 point_skyscan result=0 04:05:04 Check angles 04:05:04 SkyScan query 04:05:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.55<-21570 Statuses=0008 0009 04:05:05 Msec=0 True Az=112.995 Ze=-143.55 Az status=0008 Ze status=0009 04:05:05 Check angles 04:05:05 SkyScan query 04:05:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.595<-20173 Statuses=0008 0009 04:05:06 Msec=750 True Az=112.995 Ze=-122.595 Az status=0008 Ze status=0009 04:05:06 Check angles 04:05:06 SkyScan query 04:05:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.64<-18776 Statuses=0008 0009 04:05:06 Msec=1500 True Az=112.995 Ze=-101.64 Az status=0008 Ze status=0009 04:05:06 Check angles 04:05:06 SkyScan query 04:05:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.655<-17377 Statuses=0008 0009 04:05:07 Msec=2250 True Az=112.995 Ze=-80.655 Az status=0008 Ze status=0009 04:05:07 Check angles 04:05:07 SkyScan query 04:05:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.73<-15982 Statuses=0008 0009 04:05:08 Msec=3000 True Az=112.995 Ze=-59.73 Az status=0008 Ze status=0009 04:05:08 Check angles 04:05:08 SkyScan query 04:05:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.745<-14583 Statuses=0008 0009 04:05:09 Msec=3750 True Az=112.995 Ze=-38.745 Az status=0008 Ze status=0009 04:05:09 Check angles 04:05:09 SkyScan query 04:05:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.79<-13186 Statuses=0008 0009 04:05:09 Msec=4500 True Az=112.995 Ze=-17.79 Az status=0008 Ze status=0009 04:05:09 Check angles 04:05:09 SkyScan query 04:05:10 SkyScan query done: ret=0 az=112.995<-7533 ze=3.15<-11790 Statuses=0008 0009 04:05:10 Msec=5250 True Az=112.995 Ze=3.15 Az status=0008 Ze status=0009 04:05:10 Check angles 04:05:10 SkyScan query 04:05:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:05:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:05:11 Message to Master queued w/err=0: serial=93438 error=0 04:05:16 Received message from Master: op=Filter serial=93439 04:05:16 Color wheel filter change from 0 to 0 04:05:16 FLIGetFilterPos err=0 currentPosition=0 04:05:16 FLIGetStepsRemaining err=0 RemainingSteps=0 04:05:16 Filter is already there-color wheel unchanged 04:05:16 Received message from Master: op=Shutter serial=93440 04:05:16 Shutter LASER close 04:05:16 Received message from Camera: op=State serial=93442 04:05:16 GetSingleValue result=40 Value=cccccccc 04:05:16 SkyScan query 04:05:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:05:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:17 Parameters OK 04:05:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:17 Set A/D data flow result=40 04:05:17 Set A/D channel type result=40 04:05:17 Set A/D encoding result=40 04:05:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:17 Set channel filter=0.000000e+000 result=40 04:05:17 Config A/D Result=40 04:05:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:17 Get A/D filter: -9.255963e+061 result=40 04:05:17 Get A/D value=-858993460 result=40 04:05:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:17 Parameters OK 04:05:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:17 Set A/D data flow result=40 04:05:17 Set A/D channel type result=40 04:05:17 Set A/D encoding result=40 04:05:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:17 Set channel filter=0.000000e+000 result=40 04:05:17 Config A/D Result=40 04:05:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:17 Get A/D filter: -9.255963e+061 result=40 04:05:17 Get A/D value=-858993460 result=40 04:05:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:05:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:05:17 Aux= 04:05:17 Message to Camera, serial 93442 queued 04:05:54 Received message from Master: op=PointingHead serial=93455 04:05:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:05:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:05:54 Point started: ret=0 04:05:54 point_skyscan result=0 04:05:55 Check angles 04:05:55 SkyScan query 04:05:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:05:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:05:55 Message to Master queued w/err=0: serial=93455 error=0 04:06:00 Received message from Master: op=Filter serial=93456 04:06:00 Color wheel filter change from 0 to 0 04:06:00 FLIGetFilterPos err=0 currentPosition=0 04:06:00 FLIGetStepsRemaining err=0 RemainingSteps=0 04:06:00 Filter is already there-color wheel unchanged 04:06:00 Received message from Master: op=Shutter serial=93457 04:06:00 Shutter LASER close 04:06:00 Received message from Camera: op=State serial=93459 04:06:00 GetSingleValue result=40 Value=cccccccc 04:06:00 SkyScan query 04:06:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:06:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:01 Parameters OK 04:06:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:01 Set A/D data flow result=40 04:06:01 Set A/D channel type result=40 04:06:01 Set A/D encoding result=40 04:06:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:01 Set channel filter=0.000000e+000 result=40 04:06:01 Config A/D Result=40 04:06:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:01 Get A/D filter: -9.255963e+061 result=40 04:06:01 Get A/D value=-858993460 result=40 04:06:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:01 Parameters OK 04:06:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:01 Set A/D data flow result=40 04:06:01 Set A/D channel type result=40 04:06:01 Set A/D encoding result=40 04:06:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:01 Set channel filter=0.000000e+000 result=40 04:06:01 Config A/D Result=40 04:06:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:01 Get A/D filter: -9.255963e+061 result=40 04:06:01 Get A/D value=-858993460 result=40 04:06:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:06:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:06:01 Aux= 04:06:01 Message to Camera, serial 93459 queued 04:06:38 Received message from Master: op=PointingHead serial=93472 04:06:38 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:06:38 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:06:38 Point started: ret=0 04:06:38 point_skyscan result=0 04:06:39 Check angles 04:06:39 SkyScan query 04:06:40 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 04:06:40 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 04:06:40 Check angles 04:06:40 SkyScan query 04:06:40 SkyScan query done: ret=0 az=154.14<-10276 ze=-6.495<-12433 Statuses=0009 0008 04:06:40 Msec=750 True Az=154.14 Ze=-6.495 Az status=0009 Ze status=0008 04:06:40 Check angles 04:06:40 SkyScan query 04:06:41 SkyScan query done: ret=0 az=171.555<-11437 ze=-6.495<-12433 Statuses=0009 0008 04:06:41 Msec=1500 True Az=171.555 Ze=-6.495 Az status=0009 Ze status=0008 04:06:41 Check angles 04:06:41 SkyScan query 04:06:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:06:42 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:06:42 Message to Master queued w/err=0: serial=93472 error=0 04:06:47 Received message from Master: op=Filter serial=93473 04:06:47 Color wheel filter change from 0 to 0 04:06:47 FLIGetFilterPos err=0 currentPosition=0 04:06:47 FLIGetStepsRemaining err=0 RemainingSteps=0 04:06:47 Filter is already there-color wheel unchanged 04:06:47 Received message from Master: op=Shutter serial=93474 04:06:47 Shutter LASER close 04:06:47 Received message from Camera: op=State serial=93476 04:06:47 GetSingleValue result=40 Value=cccccccc 04:06:47 SkyScan query 04:06:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:06:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:48 Parameters OK 04:06:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:48 Set A/D data flow result=40 04:06:48 Set A/D channel type result=40 04:06:48 Set A/D encoding result=40 04:06:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:48 Set channel filter=0.000000e+000 result=40 04:06:48 Config A/D Result=40 04:06:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:48 Get A/D filter: -9.255963e+061 result=40 04:06:48 Get A/D value=-858993460 result=40 04:06:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:48 Parameters OK 04:06:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:48 Set A/D data flow result=40 04:06:48 Set A/D channel type result=40 04:06:48 Set A/D encoding result=40 04:06:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:48 Set channel filter=0.000000e+000 result=40 04:06:48 Config A/D Result=40 04:06:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:48 Get A/D filter: -9.255963e+061 result=40 04:06:48 Get A/D value=-858993460 result=40 04:06:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:06:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:06:48 Aux= 04:06:48 Message to Camera, serial 93476 queued 04:07:24 Received message from Master: op=PointingHead serial=93489 04:07:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:07:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:07:25 Point started: ret=0 04:07:25 point_skyscan result=0 04:07:25 Check angles 04:07:25 SkyScan query 04:07:26 SkyScan query done: ret=0 az=152.805<-10187 ze=6.51<-11566 Statuses=0009 0008 04:07:26 Msec=0 True Az=152.805 Ze=6.51 Az status=0009 Ze status=0008 04:07:26 Check angles 04:07:26 SkyScan query 04:07:27 SkyScan query done: ret=0 az=135.33<-9022 ze=6.495<-11567 Statuses=0009 0008 04:07:27 Msec=750 True Az=135.33 Ze=6.495 Az status=0009 Ze status=0008 04:07:27 Check angles 04:07:27 SkyScan query 04:07:28 SkyScan query done: ret=0 az=117.855<-7857 ze=6.495<-11567 Statuses=0009 0008 04:07:28 Msec=1500 True Az=117.855 Ze=6.495 Az status=0009 Ze status=0008 04:07:28 Check angles 04:07:28 SkyScan query 04:07:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:07:28 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:07:28 Message to Master queued w/err=0: serial=93489 error=0 04:07:33 Received message from Master: op=Filter serial=93490 04:07:33 Color wheel filter change from 0 to 0 04:07:33 FLIGetFilterPos err=0 currentPosition=0 04:07:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:07:33 Filter is already there-color wheel unchanged 04:07:33 Received message from Master: op=Shutter serial=93491 04:07:33 Shutter LASER close 04:07:34 Received message from Camera: op=State serial=93493 04:07:34 GetSingleValue result=40 Value=cccccccc 04:07:34 SkyScan query 04:07:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:07:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:34 Parameters OK 04:07:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:34 Set A/D data flow result=40 04:07:34 Set A/D channel type result=40 04:07:34 Set A/D encoding result=40 04:07:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:34 Set channel filter=0.000000e+000 result=40 04:07:34 Config A/D Result=40 04:07:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:34 Get A/D filter: -9.255963e+061 result=40 04:07:34 Get A/D value=-858993460 result=40 04:07:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:34 Parameters OK 04:07:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:34 Set A/D data flow result=40 04:07:34 Set A/D channel type result=40 04:07:34 Set A/D encoding result=40 04:07:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:34 Set channel filter=0.000000e+000 result=40 04:07:34 Config A/D Result=40 04:07:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:34 Get A/D filter: -9.255963e+061 result=40 04:07:34 Get A/D value=-858993460 result=40 04:07:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:07:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:07:34 Aux= 04:07:34 Message to Camera, serial 93493 queued 04:08:10 Received message from Master: op=PointingHead serial=93505 04:08:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:08:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:08:10 Point started: ret=0 04:08:10 point_skyscan result=0 04:08:11 Check angles 04:08:11 SkyScan query 04:08:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 04:08:12 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 04:08:12 Check angles 04:08:12 SkyScan query 04:08:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.7<-14980 Statuses=0008 0009 04:08:12 Msec=750 True Az=112.995 Ze=-44.7 Az status=0008 Ze status=0009 04:08:13 Check angles 04:08:13 SkyScan query 04:08:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.64<-16376 Statuses=0008 0009 04:08:13 Msec=1500 True Az=112.995 Ze=-65.64 Az status=0008 Ze status=0009 04:08:13 Check angles 04:08:13 SkyScan query 04:08:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 04:08:14 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 04:08:14 Check angles 04:08:14 SkyScan query 04:08:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.565<-19171 Statuses=0008 0009 04:08:15 Msec=3000 True Az=112.995 Ze=-107.565 Az status=0008 Ze status=0009 04:08:15 Check angles 04:08:15 SkyScan query 04:08:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.925<-20595 Statuses=0008 0009 04:08:15 Msec=3750 True Az=112.995 Ze=-128.925 Az status=0008 Ze status=0009 04:08:16 Check angles 04:08:16 SkyScan query 04:08:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.895<-21993 Statuses=0008 0009 04:08:16 Msec=4500 True Az=112.995 Ze=-149.895 Az status=0008 Ze status=0009 04:08:16 Check angles 04:08:16 SkyScan query 04:08:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.775<-23385 Statuses=0008 0009 04:08:17 Msec=5250 True Az=112.995 Ze=-170.775 Az status=0008 Ze status=0009 04:08:17 Check angles 04:08:17 SkyScan query 04:08:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:08:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:08:18 Message to Master queued w/err=0: serial=93505 error=0 04:08:23 Received message from Master: op=Filter serial=93506 04:08:23 Color wheel filter change from 0 to 0 04:08:23 FLIGetFilterPos err=0 currentPosition=0 04:08:23 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:23 Filter is already there-color wheel unchanged 04:08:23 Received message from Master: op=Shutter serial=93507 04:08:23 Shutter LASER open 04:08:23 Received message from Camera: op=State serial=93509 04:08:23 GetSingleValue result=40 Value=cccccccc 04:08:23 SkyScan query 04:08:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:08:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:24 Parameters OK 04:08:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:24 Set A/D data flow result=40 04:08:24 Set A/D channel type result=40 04:08:24 Set A/D encoding result=40 04:08:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:24 Set channel filter=0.000000e+000 result=40 04:08:24 Config A/D Result=40 04:08:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:24 Get A/D filter: -9.255963e+061 result=40 04:08:24 Get A/D value=-858993460 result=40 04:08:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:24 Parameters OK 04:08:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:24 Set A/D data flow result=40 04:08:24 Set A/D channel type result=40 04:08:24 Set A/D encoding result=40 04:08:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:24 Set channel filter=0.000000e+000 result=40 04:08:24 Config A/D Result=40 04:08:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:24 Get A/D filter: -9.255963e+061 result=40 04:08:24 Get A/D value=-858993460 result=40 04:08:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:24 Aux= 04:08:24 Message to Camera, serial 93509 queued 04:08:32 Received message from Master: op=Shutter serial=93519 04:08:32 Shutter LASER close 04:08:33 Received message from Master: op=PointingHead serial=93523 04:08:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:08:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:08:33 Point started: ret=0 04:08:33 point_skyscan result=0 04:08:34 Check angles 04:08:34 SkyScan query 04:08:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 04:08:34 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 04:08:34 Check angles 04:08:34 SkyScan query 04:08:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.98<-20132 Statuses=0008 0009 04:08:35 Msec=750 True Az=112.995 Ze=-121.98 Az status=0008 Ze status=0009 04:08:35 Check angles 04:08:35 SkyScan query 04:08:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.04<-18736 Statuses=0008 0009 04:08:36 Msec=1500 True Az=112.995 Ze=-101.04 Az status=0008 Ze status=0009 04:08:36 Check angles 04:08:36 SkyScan query 04:08:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.1<-17340 Statuses=0008 0009 04:08:36 Msec=2250 True Az=112.995 Ze=-80.1 Az status=0008 Ze status=0009 04:08:37 Check angles 04:08:37 SkyScan query 04:08:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 04:08:37 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 04:08:37 Check angles 04:08:37 SkyScan query 04:08:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.16<-14544 Statuses=0008 0009 04:08:38 Msec=3750 True Az=112.995 Ze=-38.16 Az status=0008 Ze status=0009 04:08:38 Check angles 04:08:38 SkyScan query 04:08:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.22<-13148 Statuses=0008 0009 04:08:39 Msec=4500 True Az=112.995 Ze=-17.22 Az status=0008 Ze status=0009 04:08:39 Check angles 04:08:39 SkyScan query 04:08:39 SkyScan query done: ret=0 az=112.995<-7533 ze=3.735<-11751 Statuses=0008 0009 04:08:39 Msec=5250 True Az=112.995 Ze=3.735 Az status=0008 Ze status=0009 04:08:40 Check angles 04:08:40 SkyScan query 04:08:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:08:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:08:40 Message to Master queued w/err=0: serial=93523 error=0 04:08:45 Received message from Master: op=Filter serial=93524 04:08:45 Color wheel filter change from 0 to 0 04:08:45 FLIGetFilterPos err=0 currentPosition=0 04:08:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:45 Filter is already there-color wheel unchanged 04:08:45 Received message from Master: op=Shutter serial=93525 04:08:45 Shutter LASER close 04:08:46 Received message from Camera: op=State serial=93527 04:08:46 GetSingleValue result=40 Value=cccccccc 04:08:46 SkyScan query 04:08:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:08:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:46 Parameters OK 04:08:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:46 Set A/D data flow result=40 04:08:46 Set A/D channel type result=40 04:08:46 Set A/D encoding result=40 04:08:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:46 Set channel filter=0.000000e+000 result=40 04:08:46 Config A/D Result=40 04:08:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:46 Get A/D filter: -9.255963e+061 result=40 04:08:46 Get A/D value=-858993460 result=40 04:08:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:46 Parameters OK 04:08:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:46 Set A/D data flow result=40 04:08:46 Set A/D channel type result=40 04:08:46 Set A/D encoding result=40 04:08:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:46 Set channel filter=0.000000e+000 result=40 04:08:46 Config A/D Result=40 04:08:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:46 Get A/D filter: -9.255963e+061 result=40 04:08:46 Get A/D value=-858993460 result=40 04:08:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:46 Aux= 04:08:46 Message to Camera, serial 93527 queued 04:09:23 Received message from Master: op=PointingHead serial=93540 04:09:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:09:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:09:23 Point started: ret=0 04:09:23 point_skyscan result=0 04:09:24 Check angles 04:09:24 SkyScan query 04:09:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:09:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:09:25 Message to Master queued w/err=0: serial=93540 error=0 04:09:30 Received message from Master: op=Filter serial=93541 04:09:30 Color wheel filter change from 0 to 0 04:09:30 FLIGetFilterPos err=0 currentPosition=0 04:09:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:09:30 Filter is already there-color wheel unchanged 04:09:30 Received message from Master: op=Shutter serial=93542 04:09:30 Shutter LASER close 04:09:30 Received message from Camera: op=State serial=93544 04:09:30 GetSingleValue result=40 Value=cccccccc 04:09:30 SkyScan query 04:09:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:09:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:30 Parameters OK 04:09:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:30 Set A/D data flow result=40 04:09:30 Set A/D channel type result=40 04:09:30 Set A/D encoding result=40 04:09:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:30 Set channel filter=0.000000e+000 result=40 04:09:30 Config A/D Result=40 04:09:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:30 Get A/D filter: -9.255963e+061 result=40 04:09:30 Get A/D value=-858993460 result=40 04:09:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:30 Parameters OK 04:09:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:30 Set A/D data flow result=40 04:09:30 Set A/D channel type result=40 04:09:30 Set A/D encoding result=40 04:09:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:30 Set channel filter=0.000000e+000 result=40 04:09:30 Config A/D Result=40 04:09:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:30 Get A/D filter: -9.255963e+061 result=40 04:09:30 Get A/D value=-858993460 result=40 04:09:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:09:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:09:30 Aux= 04:09:30 Message to Camera, serial 93544 queued 04:10:06 Received message from Master: op=PointingHead serial=93556 04:10:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:10:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:10:07 Point started: ret=0 04:10:07 point_skyscan result=0 04:10:07 Check angles 04:10:07 SkyScan query 04:10:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:10:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:10:08 Message to Master queued w/err=0: serial=93556 error=0 04:10:13 Received message from Master: op=Filter serial=93557 04:10:13 Color wheel filter change from 0 to 0 04:10:13 FLIGetFilterPos err=0 currentPosition=0 04:10:13 FLIGetStepsRemaining err=0 RemainingSteps=0 04:10:13 Filter is already there-color wheel unchanged 04:10:13 Received message from Master: op=Shutter serial=93558 04:10:13 Shutter LASER close 04:10:13 Received message from Camera: op=State serial=93560 04:10:13 GetSingleValue result=40 Value=cccccccc 04:10:13 SkyScan query 04:10:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:10:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:14 Parameters OK 04:10:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:14 Set A/D data flow result=40 04:10:14 Set A/D channel type result=40 04:10:14 Set A/D encoding result=40 04:10:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:14 Set channel filter=0.000000e+000 result=40 04:10:14 Config A/D Result=40 04:10:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:14 Get A/D filter: -9.255963e+061 result=40 04:10:14 Get A/D value=-858993460 result=40 04:10:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:14 Parameters OK 04:10:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:14 Set A/D data flow result=40 04:10:14 Set A/D channel type result=40 04:10:14 Set A/D encoding result=40 04:10:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:14 Set channel filter=0.000000e+000 result=40 04:10:14 Config A/D Result=40 04:10:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:14 Get A/D filter: -9.255963e+061 result=40 04:10:14 Get A/D value=-858993460 result=40 04:10:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:10:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:10:14 Aux= 04:10:14 Message to Camera, serial 93560 queued 04:10:51 Received message from Master: op=PointingHead serial=93573 04:10:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:10:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:10:51 Point started: ret=0 04:10:51 point_skyscan result=0 04:10:52 Check angles 04:10:52 SkyScan query 04:10:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:10:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:10:52 Message to Master queued w/err=0: serial=93573 error=0 04:10:57 Received message from Master: op=Filter serial=93574 04:10:57 Color wheel filter change from 0 to 0 04:10:57 FLIGetFilterPos err=0 currentPosition=0 04:10:57 FLIGetStepsRemaining err=0 RemainingSteps=0 04:10:57 Filter is already there-color wheel unchanged 04:10:57 Received message from Master: op=Shutter serial=93575 04:10:57 Shutter LASER close 04:10:58 Received message from Camera: op=State serial=93577 04:10:58 GetSingleValue result=40 Value=cccccccc 04:10:58 SkyScan query 04:10:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:10:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:58 Parameters OK 04:10:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:58 Set A/D data flow result=40 04:10:58 Set A/D channel type result=40 04:10:58 Set A/D encoding result=40 04:10:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:58 Set channel filter=0.000000e+000 result=40 04:10:58 Config A/D Result=40 04:10:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:58 Get A/D filter: -9.255963e+061 result=40 04:10:58 Get A/D value=-858993460 result=40 04:10:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:58 Parameters OK 04:10:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:58 Set A/D data flow result=40 04:10:58 Set A/D channel type result=40 04:10:58 Set A/D encoding result=40 04:10:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:58 Set channel filter=0.000000e+000 result=40 04:10:58 Config A/D Result=40 04:10:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:58 Get A/D filter: -9.255963e+061 result=40 04:10:58 Get A/D value=-858993460 result=40 04:10:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:10:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:10:58 Aux= 04:10:58 Message to Camera, serial 93577 queued 04:11:35 Received message from Master: op=PointingHead serial=93590 04:11:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:11:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:11:35 Point started: ret=0 04:11:35 point_skyscan result=0 04:11:36 Check angles 04:11:36 SkyScan query 04:11:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 04:11:37 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 04:11:37 Check angles 04:11:37 SkyScan query 04:11:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.25<-14950 Statuses=0008 0009 04:11:37 Msec=750 True Az=112.995 Ze=-44.25 Az status=0008 Ze status=0009 04:11:38 Check angles 04:11:38 SkyScan query 04:11:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.205<-16347 Statuses=0008 0009 04:11:38 Msec=1500 True Az=112.995 Ze=-65.205 Az status=0008 Ze status=0009 04:11:38 Check angles 04:11:38 SkyScan query 04:11:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.19<-17746 Statuses=0008 0009 04:11:39 Msec=2250 True Az=112.995 Ze=-86.19 Az status=0008 Ze status=0009 04:11:39 Check angles 04:11:39 SkyScan query 04:11:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.115<-19141 Statuses=0008 0009 04:11:40 Msec=3000 True Az=112.995 Ze=-107.115 Az status=0008 Ze status=0009 04:11:40 Check angles 04:11:40 SkyScan query 04:11:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.085<-20539 Statuses=0008 0009 04:11:40 Msec=3750 True Az=112.995 Ze=-128.085 Az status=0008 Ze status=0009 04:11:41 Check angles 04:11:41 SkyScan query 04:11:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.025<-21935 Statuses=0008 0009 04:11:41 Msec=4500 True Az=112.995 Ze=-149.025 Az status=0008 Ze status=0009 04:11:41 Check angles 04:11:41 SkyScan query 04:11:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.4<-23360 Statuses=0008 0009 04:11:42 Msec=5250 True Az=112.995 Ze=-170.4 Az status=0008 Ze status=0009 04:11:42 Check angles 04:11:42 SkyScan query 04:11:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:11:43 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:11:43 Message to Master queued w/err=0: serial=93590 error=0 04:11:48 Received message from Master: op=Filter serial=93591 04:11:48 Color wheel filter change from 0 to 0 04:11:48 FLIGetFilterPos err=0 currentPosition=0 04:11:48 FLIGetStepsRemaining err=0 RemainingSteps=0 04:11:48 Filter is already there-color wheel unchanged 04:11:48 Received message from Master: op=Shutter serial=93592 04:11:48 Shutter LASER open 04:11:48 Received message from Camera: op=State serial=93594 04:11:48 GetSingleValue result=40 Value=cccccccc 04:11:48 SkyScan query 04:11:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:11:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:49 Parameters OK 04:11:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:49 Set A/D data flow result=40 04:11:49 Set A/D channel type result=40 04:11:49 Set A/D encoding result=40 04:11:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:49 Set channel filter=0.000000e+000 result=40 04:11:49 Config A/D Result=40 04:11:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:49 Get A/D filter: -9.255963e+061 result=40 04:11:49 Get A/D value=-858993460 result=40 04:11:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:49 Parameters OK 04:11:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:49 Set A/D data flow result=40 04:11:49 Set A/D channel type result=40 04:11:49 Set A/D encoding result=40 04:11:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:49 Set channel filter=0.000000e+000 result=40 04:11:49 Config A/D Result=40 04:11:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:49 Get A/D filter: -9.255963e+061 result=40 04:11:49 Get A/D value=-858993460 result=40 04:11:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:11:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:11:49 Aux= 04:11:49 Message to Camera, serial 93594 queued 04:11:57 Received message from Master: op=Shutter serial=93604 04:11:57 Shutter LASER close 04:11:58 Received message from Master: op=PointingHead serial=93608 04:11:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:11:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:11:58 Point started: ret=0 04:11:58 point_skyscan result=0 04:11:59 Check angles 04:11:59 SkyScan query 04:11:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.04<-21536 Statuses=0008 0009 04:11:59 Msec=0 True Az=112.995 Ze=-143.04 Az status=0008 Ze status=0009 04:11:59 Check angles 04:11:59 SkyScan query 04:12:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 04:12:00 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 04:12:00 Check angles 04:12:00 SkyScan query 04:12:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.695<-18713 Statuses=0008 0009 04:12:01 Msec=1500 True Az=112.995 Ze=-100.695 Az status=0008 Ze status=0009 04:12:01 Check angles 04:12:01 SkyScan query 04:12:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.74<-17316 Statuses=0008 0009 04:12:02 Msec=2250 True Az=112.995 Ze=-79.74 Az status=0008 Ze status=0009 04:12:02 Check angles 04:12:02 SkyScan query 04:12:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 04:12:02 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 04:12:02 Check angles 04:12:02 SkyScan query 04:12:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.83<-14522 Statuses=0008 0009 04:12:03 Msec=3750 True Az=112.995 Ze=-37.83 Az status=0008 Ze status=0009 04:12:03 Check angles 04:12:03 SkyScan query 04:12:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.875<-13125 Statuses=0008 0009 04:12:04 Msec=4500 True Az=112.995 Ze=-16.875 Az status=0008 Ze status=0009 04:12:04 Check angles 04:12:04 SkyScan query 04:12:05 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 04:12:05 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 04:12:05 Check angles 04:12:05 SkyScan query 04:12:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:12:05 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:12:05 Message to Master queued w/err=0: serial=93608 error=0 04:12:10 Received message from Master: op=Filter serial=93609 04:12:10 Color wheel filter change from 0 to 0 04:12:10 FLIGetFilterPos err=0 currentPosition=0 04:12:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:10 Filter is already there-color wheel unchanged 04:12:10 Received message from Master: op=Shutter serial=93610 04:12:10 Shutter LASER close 04:12:11 Received message from Camera: op=State serial=93612 04:12:11 GetSingleValue result=40 Value=cccccccc 04:12:11 SkyScan query 04:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:12:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:11 Parameters OK 04:12:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:11 Set A/D data flow result=40 04:12:11 Set A/D channel type result=40 04:12:11 Set A/D encoding result=40 04:12:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:11 Set channel filter=0.000000e+000 result=40 04:12:11 Config A/D Result=40 04:12:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:11 Get A/D filter: -9.255963e+061 result=40 04:12:11 Get A/D value=-858993460 result=40 04:12:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:11 Parameters OK 04:12:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:11 Set A/D data flow result=40 04:12:11 Set A/D channel type result=40 04:12:11 Set A/D encoding result=40 04:12:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:11 Set channel filter=0.000000e+000 result=40 04:12:11 Config A/D Result=40 04:12:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:11 Get A/D filter: -9.255963e+061 result=40 04:12:11 Get A/D value=-858993460 result=40 04:12:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:11 Aux= 04:12:11 Message to Camera, serial 93612 queued 04:12:48 Received message from Master: op=PointingHead serial=93625 04:12:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:12:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:12:48 Point started: ret=0 04:12:48 point_skyscan result=0 04:12:49 Check angles 04:12:49 SkyScan query 04:12:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:12:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:12:50 Message to Master queued w/err=0: serial=93625 error=0 04:12:55 Received message from Master: op=Filter serial=93626 04:12:55 Color wheel filter change from 0 to 0 04:12:55 FLIGetFilterPos err=0 currentPosition=0 04:12:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:55 Filter is already there-color wheel unchanged 04:12:55 Received message from Master: op=Shutter serial=93627 04:12:55 Shutter LASER close 04:12:55 Received message from Camera: op=State serial=93629 04:12:55 GetSingleValue result=40 Value=cccccccc 04:12:55 SkyScan query 04:12:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:12:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:55 Parameters OK 04:12:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:55 Set A/D data flow result=40 04:12:55 Set A/D channel type result=40 04:12:55 Set A/D encoding result=40 04:12:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:55 Set channel filter=0.000000e+000 result=40 04:12:55 Config A/D Result=40 04:12:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:55 Get A/D filter: -9.255963e+061 result=40 04:12:55 Get A/D value=-858993460 result=40 04:12:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:55 Parameters OK 04:12:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:55 Set A/D data flow result=40 04:12:55 Set A/D channel type result=40 04:12:55 Set A/D encoding result=40 04:12:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:55 Set channel filter=0.000000e+000 result=40 04:12:55 Config A/D Result=40 04:12:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:55 Get A/D filter: -9.255963e+061 result=40 04:12:55 Get A/D value=-858993460 result=40 04:12:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:55 Aux= 04:12:55 Message to Camera, serial 93629 queued 04:13:32 Received message from Master: op=PointingHead serial=93642 04:13:32 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:13:32 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:13:33 Point started: ret=0 04:13:33 point_skyscan result=0 04:13:33 Check angles 04:13:33 SkyScan query 04:13:34 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 04:13:34 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 04:13:34 Check angles 04:13:34 SkyScan query 04:13:35 SkyScan query done: ret=0 az=153.495<-10233 ze=-6.495<-12433 Statuses=0009 0008 04:13:35 Msec=750 True Az=153.495 Ze=-6.495 Az status=0009 Ze status=0008 04:13:35 Check angles 04:13:35 SkyScan query 04:13:35 SkyScan query done: ret=0 az=170.97<-11398 ze=-6.495<-12433 Statuses=0009 0008 04:13:35 Msec=1500 True Az=170.97 Ze=-6.495 Az status=0009 Ze status=0008 04:13:36 Check angles 04:13:36 SkyScan query 04:13:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:13:36 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:13:36 Message to Master queued w/err=0: serial=93642 error=0 04:13:41 Received message from Master: op=Filter serial=93643 04:13:41 Color wheel filter change from 0 to 0 04:13:41 FLIGetFilterPos err=0 currentPosition=0 04:13:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:13:41 Filter is already there-color wheel unchanged 04:13:41 Received message from Master: op=Shutter serial=93644 04:13:41 Shutter LASER close 04:13:41 Received message from Camera: op=State serial=93646 04:13:41 GetSingleValue result=40 Value=cccccccc 04:13:41 SkyScan query 04:13:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:13:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:42 Parameters OK 04:13:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:42 Set A/D data flow result=40 04:13:42 Set A/D channel type result=40 04:13:42 Set A/D encoding result=40 04:13:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:42 Set channel filter=0.000000e+000 result=40 04:13:42 Config A/D Result=40 04:13:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:42 Get A/D filter: -9.255963e+061 result=40 04:13:42 Get A/D value=-858993460 result=40 04:13:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:42 Parameters OK 04:13:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:42 Set A/D data flow result=40 04:13:42 Set A/D channel type result=40 04:13:42 Set A/D encoding result=40 04:13:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:42 Set channel filter=0.000000e+000 result=40 04:13:42 Config A/D Result=40 04:13:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:42 Get A/D filter: -9.255963e+061 result=40 04:13:42 Get A/D value=-858993460 result=40 04:13:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:13:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:13:42 Aux= 04:13:42 Message to Camera, serial 93646 queued [UTC 2019-3-4 04:14:19] 04:14:19 Received message from Master: op=PointingHead serial=93659 04:14:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:14:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:14:19 Point started: ret=0 04:14:19 point_skyscan result=0 04:14:20 Check angles 04:14:20 SkyScan query 04:14:21 SkyScan query done: ret=0 az=153.105<-10207 ze=6.51<-11566 Statuses=0009 0008 04:14:21 Msec=0 True Az=153.105 Ze=6.51 Az status=0009 Ze status=0008 04:14:21 Check angles 04:14:21 SkyScan query 04:14:21 SkyScan query done: ret=0 az=135.675<-9045 ze=6.495<-11567 Statuses=0009 0008 04:14:21 Msec=750 True Az=135.675 Ze=6.495 Az status=0009 Ze status=0008 04:14:22 Check angles 04:14:22 SkyScan query 04:14:22 SkyScan query done: ret=0 az=118.17<-7878 ze=6.495<-11567 Statuses=0009 0008 04:14:22 Msec=1500 True Az=118.17 Ze=6.495 Az status=0009 Ze status=0008 04:14:22 Check angles 04:14:22 SkyScan query 04:14:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:14:23 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:14:23 Message to Master queued w/err=0: serial=93659 error=0 04:14:28 Received message from Master: op=Filter serial=93660 04:14:28 Color wheel filter change from 0 to 0 04:14:28 FLIGetFilterPos err=0 currentPosition=0 04:14:28 FLIGetStepsRemaining err=0 RemainingSteps=0 04:14:28 Filter is already there-color wheel unchanged 04:14:28 Received message from Master: op=Shutter serial=93661 04:14:28 Shutter LASER close 04:14:28 Received message from Camera: op=State serial=93663 04:14:28 GetSingleValue result=40 Value=cccccccc 04:14:28 SkyScan query 04:14:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:14:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:29 Parameters OK 04:14:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:29 Set A/D data flow result=40 04:14:29 Set A/D channel type result=40 04:14:29 Set A/D encoding result=40 04:14:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:29 Set channel filter=0.000000e+000 result=40 04:14:29 Config A/D Result=40 04:14:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:29 Get A/D filter: -9.255963e+061 result=40 04:14:29 Get A/D value=-858993460 result=40 04:14:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:29 Parameters OK 04:14:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:29 Set A/D data flow result=40 04:14:29 Set A/D channel type result=40 04:14:29 Set A/D encoding result=40 04:14:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:29 Set channel filter=0.000000e+000 result=40 04:14:29 Config A/D Result=40 04:14:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:29 Get A/D filter: -9.255963e+061 result=40 04:14:29 Get A/D value=-858993460 result=40 04:14:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:14:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:14:29 Aux= 04:14:29 Message to Camera, serial 93663 queued 04:15:06 Received message from Master: op=PointingHead serial=93676 04:15:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:15:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:15:06 Point started: ret=0 04:15:06 point_skyscan result=0 04:15:07 Check angles 04:15:07 SkyScan query 04:15:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.49<-13566 Statuses=0008 0009 04:15:07 Msec=0 True Az=112.995 Ze=-23.49 Az status=0008 Ze status=0009 04:15:07 Check angles 04:15:07 SkyScan query 04:15:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 04:15:08 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 04:15:08 Check angles 04:15:08 SkyScan query 04:15:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.415<-16361 Statuses=0008 0009 04:15:09 Msec=1500 True Az=112.995 Ze=-65.415 Az status=0008 Ze status=0009 04:15:09 Check angles 04:15:09 SkyScan query 04:15:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 04:15:09 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 04:15:10 Check angles 04:15:10 SkyScan query 04:15:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.31<-19154 Statuses=0008 0009 04:15:10 Msec=3000 True Az=112.995 Ze=-107.31 Az status=0008 Ze status=0009 04:15:10 Check angles 04:15:10 SkyScan query 04:15:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.265<-20551 Statuses=0008 0009 04:15:11 Msec=3750 True Az=112.995 Ze=-128.265 Az status=0008 Ze status=0009 04:15:11 Check angles 04:15:11 SkyScan query 04:15:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.22<-21948 Statuses=0008 0009 04:15:12 Msec=4500 True Az=112.995 Ze=-149.22 Az status=0008 Ze status=0009 04:15:12 Check angles 04:15:12 SkyScan query 04:15:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.175<-23345 Statuses=0008 0009 04:15:12 Msec=5250 True Az=112.995 Ze=-170.175 Az status=0008 Ze status=0009 04:15:13 Check angles 04:15:13 SkyScan query 04:15:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:15:13 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:15:13 Message to Master queued w/err=0: serial=93676 error=0 04:15:18 Received message from Master: op=Filter serial=93677 04:15:18 Color wheel filter change from 0 to 0 04:15:18 FLIGetFilterPos err=0 currentPosition=0 04:15:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:18 Filter is already there-color wheel unchanged 04:15:18 Received message from Master: op=Shutter serial=93678 04:15:18 Shutter LASER open 04:15:19 Received message from Camera: op=State serial=93680 04:15:19 GetSingleValue result=40 Value=cccccccc 04:15:19 SkyScan query 04:15:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:15:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:19 Parameters OK 04:15:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:19 Set A/D data flow result=40 04:15:19 Set A/D channel type result=40 04:15:19 Set A/D encoding result=40 04:15:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:19 Set channel filter=0.000000e+000 result=40 04:15:19 Config A/D Result=40 04:15:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:19 Get A/D filter: -9.255963e+061 result=40 04:15:19 Get A/D value=-858993460 result=40 04:15:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:19 Parameters OK 04:15:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:19 Set A/D data flow result=40 04:15:19 Set A/D channel type result=40 04:15:19 Set A/D encoding result=40 04:15:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:19 Set channel filter=0.000000e+000 result=40 04:15:19 Config A/D Result=40 04:15:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:19 Get A/D filter: -9.255963e+061 result=40 04:15:19 Get A/D value=-858993460 result=40 04:15:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:19 Aux= 04:15:19 Message to Camera, serial 93680 queued 04:15:28 Received message from Master: op=Shutter serial=93690 04:15:28 Shutter LASER close 04:15:28 Received message from Master: op=PointingHead serial=93694 04:15:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:15:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:15:28 Point started: ret=0 04:15:28 point_skyscan result=0 04:15:29 Check angles 04:15:29 SkyScan query 04:15:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 04:15:30 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 04:15:30 Check angles 04:15:30 SkyScan query 04:15:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 04:15:30 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 04:15:31 Check angles 04:15:31 SkyScan query 04:15:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.44<-18696 Statuses=0008 0009 04:15:31 Msec=1500 True Az=112.995 Ze=-100.44 Az status=0008 Ze status=0009 04:15:31 Check angles 04:15:31 SkyScan query 04:15:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.5<-17300 Statuses=0008 0009 04:15:32 Msec=2250 True Az=112.995 Ze=-79.5 Az status=0008 Ze status=0009 04:15:32 Check angles 04:15:32 SkyScan query 04:15:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.095<-15873 Statuses=0008 0009 04:15:33 Msec=3000 True Az=112.995 Ze=-58.095 Az status=0008 Ze status=0009 04:15:33 Check angles 04:15:33 SkyScan query 04:15:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.735<-14449 Statuses=0008 0009 04:15:34 Msec=3750 True Az=112.995 Ze=-36.735 Az status=0008 Ze status=0009 04:15:34 Check angles 04:15:34 SkyScan query 04:15:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.315<-13021 Statuses=0008 0009 04:15:34 Msec=4500 True Az=112.995 Ze=-15.315 Az status=0008 Ze status=0009 04:15:34 Check angles 04:15:34 SkyScan query 04:15:35 SkyScan query done: ret=0 az=112.995<-7533 ze=5.205<-11653 Statuses=0008 0009 04:15:35 Msec=5250 True Az=112.995 Ze=5.205 Az status=0008 Ze status=0009 04:15:35 Check angles 04:15:35 SkyScan query 04:15:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:15:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:15:36 Message to Master queued w/err=0: serial=93694 error=0 04:15:41 Received message from Master: op=Filter serial=93695 04:15:41 Color wheel filter change from 0 to 0 04:15:41 FLIGetFilterPos err=0 currentPosition=0 04:15:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:41 Filter is already there-color wheel unchanged 04:15:41 Received message from Master: op=Shutter serial=93696 04:15:41 Shutter LASER close 04:15:41 Received message from Camera: op=State serial=93698 04:15:41 GetSingleValue result=40 Value=cccccccc 04:15:41 SkyScan query 04:15:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:15:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:42 Parameters OK 04:15:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:42 Set A/D data flow result=40 04:15:42 Set A/D channel type result=40 04:15:42 Set A/D encoding result=40 04:15:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:42 Set channel filter=0.000000e+000 result=40 04:15:42 Config A/D Result=40 04:15:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:42 Get A/D filter: -9.255963e+061 result=40 04:15:42 Get A/D value=-858993460 result=40 04:15:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:42 Parameters OK 04:15:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:42 Set A/D data flow result=40 04:15:42 Set A/D channel type result=40 04:15:42 Set A/D encoding result=40 04:15:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:42 Set channel filter=0.000000e+000 result=40 04:15:42 Config A/D Result=40 04:15:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:42 Get A/D filter: -9.255963e+061 result=40 04:15:42 Get A/D value=-858993460 result=40 04:15:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:42 Aux= 04:15:42 Message to Camera, serial 93698 queued 04:16:19 Received message from Master: op=PointingHead serial=93711 04:16:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:16:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:16:19 Point started: ret=0 04:16:19 point_skyscan result=0 04:16:20 Check angles 04:16:20 SkyScan query 04:16:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:16:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:16:20 Message to Master queued w/err=0: serial=93711 error=0 04:16:25 Received message from Master: op=Filter serial=93712 04:16:25 Color wheel filter change from 0 to 0 04:16:25 FLIGetFilterPos err=0 currentPosition=0 04:16:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:16:25 Filter is already there-color wheel unchanged 04:16:25 Received message from Master: op=Shutter serial=93713 04:16:25 Shutter LASER close 04:16:25 Received message from Camera: op=State serial=93715 04:16:25 GetSingleValue result=40 Value=cccccccc 04:16:25 SkyScan query 04:16:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:16:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:26 Parameters OK 04:16:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:26 Set A/D data flow result=40 04:16:26 Set A/D channel type result=40 04:16:26 Set A/D encoding result=40 04:16:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:26 Set channel filter=0.000000e+000 result=40 04:16:26 Config A/D Result=40 04:16:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:26 Get A/D filter: -9.255963e+061 result=40 04:16:26 Get A/D value=-858993460 result=40 04:16:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:26 Parameters OK 04:16:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:26 Set A/D data flow result=40 04:16:26 Set A/D channel type result=40 04:16:26 Set A/D encoding result=40 04:16:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:26 Set channel filter=0.000000e+000 result=40 04:16:26 Config A/D Result=40 04:16:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:26 Get A/D filter: -9.255963e+061 result=40 04:16:26 Get A/D value=-858993460 result=40 04:16:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:16:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:16:26 Aux= 04:16:26 Message to Camera, serial 93715 queued 04:17:03 Received message from Master: op=PointingHead serial=93728 04:17:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:17:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:17:03 Point started: ret=0 04:17:03 point_skyscan result=0 04:17:04 Check angles 04:17:04 SkyScan query 04:17:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:17:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:17:04 Message to Master queued w/err=0: serial=93728 error=0 04:17:09 Received message from Master: op=Filter serial=93729 04:17:09 Color wheel filter change from 0 to 0 04:17:09 FLIGetFilterPos err=0 currentPosition=0 04:17:09 FLIGetStepsRemaining err=0 RemainingSteps=0 04:17:09 Filter is already there-color wheel unchanged 04:17:10 Received message from Master: op=Shutter serial=93730 04:17:10 Shutter LASER close 04:17:10 Received message from Camera: op=State serial=93732 04:17:10 GetSingleValue result=40 Value=cccccccc 04:17:10 SkyScan query 04:17:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:17:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:10 Parameters OK 04:17:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:10 Set A/D data flow result=40 04:17:10 Set A/D channel type result=40 04:17:10 Set A/D encoding result=40 04:17:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:10 Set channel filter=0.000000e+000 result=40 04:17:10 Config A/D Result=40 04:17:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:10 Get A/D filter: -9.255963e+061 result=40 04:17:10 Get A/D value=-858993460 result=40 04:17:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:10 Parameters OK 04:17:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:10 Set A/D data flow result=40 04:17:10 Set A/D channel type result=40 04:17:10 Set A/D encoding result=40 04:17:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:10 Set channel filter=0.000000e+000 result=40 04:17:10 Config A/D Result=40 04:17:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:10 Get A/D filter: -9.255963e+061 result=40 04:17:10 Get A/D value=-858993460 result=40 04:17:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:17:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:17:10 Aux= 04:17:10 Message to Camera, serial 93732 queued 04:17:47 Received message from Master: op=PointingHead serial=93745 04:17:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:17:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:17:47 Point started: ret=0 04:17:47 point_skyscan result=0 04:17:48 Check angles 04:17:48 SkyScan query 04:17:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:17:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:17:49 Message to Master queued w/err=0: serial=93745 error=0 04:17:54 Received message from Master: op=Filter serial=93746 04:17:54 Color wheel filter change from 0 to 0 04:17:54 FLIGetFilterPos err=0 currentPosition=0 04:17:54 FLIGetStepsRemaining err=0 RemainingSteps=0 04:17:54 Filter is already there-color wheel unchanged 04:17:54 Received message from Master: op=Shutter serial=93747 04:17:54 Shutter LASER close 04:17:54 Received message from Camera: op=State serial=93749 04:17:54 GetSingleValue result=40 Value=cccccccc 04:17:54 SkyScan query 04:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:17:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:55 Parameters OK 04:17:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:55 Set A/D data flow result=40 04:17:55 Set A/D channel type result=40 04:17:55 Set A/D encoding result=40 04:17:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:55 Set channel filter=0.000000e+000 result=40 04:17:55 Config A/D Result=40 04:17:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:55 Get A/D filter: -9.255963e+061 result=40 04:17:55 Get A/D value=-858993460 result=40 04:17:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:55 Parameters OK 04:17:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:55 Set A/D data flow result=40 04:17:55 Set A/D channel type result=40 04:17:55 Set A/D encoding result=40 04:17:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:55 Set channel filter=0.000000e+000 result=40 04:17:55 Config A/D Result=40 04:17:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:55 Get A/D filter: -9.255963e+061 result=40 04:17:55 Get A/D value=-858993460 result=40 04:17:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:17:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:17:55 Aux= 04:17:55 Message to Camera, serial 93749 queued 04:18:31 Received message from Master: op=PointingHead serial=93762 04:18:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:18:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:18:32 Point started: ret=0 04:18:32 point_skyscan result=0 04:18:32 Check angles 04:18:32 SkyScan query 04:18:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.46<-13564 Statuses=0008 0009 04:18:33 Msec=0 True Az=112.995 Ze=-23.46 Az status=0008 Ze status=0009 04:18:33 Check angles 04:18:33 SkyScan query 04:18:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.43<-14962 Statuses=0008 0009 04:18:34 Msec=750 True Az=112.995 Ze=-44.43 Az status=0008 Ze status=0009 04:18:34 Check angles 04:18:34 SkyScan query 04:18:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.4<-16360 Statuses=0008 0009 04:18:35 Msec=1500 True Az=112.995 Ze=-65.4 Az status=0008 Ze status=0009 04:18:35 Check angles 04:18:35 SkyScan query 04:18:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 04:18:35 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 04:18:35 Check angles 04:18:35 SkyScan query 04:18:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.295<-19153 Statuses=0008 0009 04:18:36 Msec=3000 True Az=112.995 Ze=-107.295 Az status=0008 Ze status=0009 04:18:36 Check angles 04:18:36 SkyScan query 04:18:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.235<-20549 Statuses=0008 0009 04:18:37 Msec=3750 True Az=112.995 Ze=-128.235 Az status=0008 Ze status=0009 04:18:37 Check angles 04:18:37 SkyScan query 04:18:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.205<-21947 Statuses=0008 0009 04:18:38 Msec=4500 True Az=112.995 Ze=-149.205 Az status=0008 Ze status=0009 04:18:38 Check angles 04:18:38 SkyScan query 04:18:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.145<-23343 Statuses=0008 0009 04:18:38 Msec=5250 True Az=112.995 Ze=-170.145 Az status=0008 Ze status=0009 04:18:38 Check angles 04:18:38 SkyScan query 04:18:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:18:39 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:18:39 Message to Master queued w/err=0: serial=93762 error=0 04:18:44 Received message from Master: op=Filter serial=93763 04:18:44 Color wheel filter change from 0 to 0 04:18:44 FLIGetFilterPos err=0 currentPosition=0 04:18:44 FLIGetStepsRemaining err=0 RemainingSteps=0 04:18:44 Filter is already there-color wheel unchanged 04:18:44 Received message from Master: op=Shutter serial=93764 04:18:44 Shutter LASER open 04:18:44 Received message from Camera: op=State serial=93766 04:18:44 GetSingleValue result=40 Value=cccccccc 04:18:44 SkyScan query 04:18:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:18:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:45 Parameters OK 04:18:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:45 Set A/D data flow result=40 04:18:45 Set A/D channel type result=40 04:18:45 Set A/D encoding result=40 04:18:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:45 Set channel filter=0.000000e+000 result=40 04:18:45 Config A/D Result=40 04:18:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:45 Get A/D filter: -9.255963e+061 result=40 04:18:45 Get A/D value=-858993460 result=40 04:18:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:45 Parameters OK 04:18:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:45 Set A/D data flow result=40 04:18:45 Set A/D channel type result=40 04:18:45 Set A/D encoding result=40 04:18:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:45 Set channel filter=0.000000e+000 result=40 04:18:45 Config A/D Result=40 04:18:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:45 Get A/D filter: -9.255963e+061 result=40 04:18:45 Get A/D value=-858993460 result=40 04:18:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:45 Aux= 04:18:45 Message to Camera, serial 93766 queued 04:18:53 Received message from Master: op=Shutter serial=93776 04:18:53 Shutter LASER close 04:18:54 Received message from Master: op=PointingHead serial=93780 04:18:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:18:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:18:54 Point started: ret=0 04:18:54 point_skyscan result=0 04:18:55 Check angles 04:18:55 SkyScan query 04:18:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 04:18:56 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 04:18:56 Check angles 04:18:56 SkyScan query 04:18:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.49<-20166 Statuses=0008 0009 04:18:56 Msec=750 True Az=112.995 Ze=-122.49 Az status=0008 Ze status=0009 04:18:57 Check angles 04:18:57 SkyScan query 04:18:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.52<-18768 Statuses=0008 0009 04:18:57 Msec=1500 True Az=112.995 Ze=-101.52 Az status=0008 Ze status=0009 04:18:57 Check angles 04:18:57 SkyScan query 04:18:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.55<-17370 Statuses=0008 0009 04:18:58 Msec=2250 True Az=112.995 Ze=-80.55 Az status=0008 Ze status=0009 04:18:58 Check angles 04:18:58 SkyScan query 04:18:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 04:18:59 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 04:18:59 Check angles 04:18:59 SkyScan query 04:18:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 04:18:59 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 04:19:00 Check angles 04:19:00 SkyScan query 04:19:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.265<-13151 Statuses=0008 0009 04:19:00 Msec=4500 True Az=112.995 Ze=-17.265 Az status=0008 Ze status=0009 04:19:00 Check angles 04:19:00 SkyScan query 04:19:01 SkyScan query done: ret=0 az=112.995<-7533 ze=4.11<-11726 Statuses=0008 0009 04:19:01 Msec=5250 True Az=112.995 Ze=4.11 Az status=0008 Ze status=0009 04:19:01 Check angles 04:19:01 SkyScan query 04:19:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:19:02 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:19:02 Message to Master queued w/err=0: serial=93780 error=0 04:19:07 Received message from Master: op=Filter serial=93781 04:19:07 Color wheel filter change from 0 to 0 04:19:07 FLIGetFilterPos err=0 currentPosition=0 04:19:07 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:07 Filter is already there-color wheel unchanged 04:19:07 Received message from Master: op=Shutter serial=93782 04:19:07 Shutter LASER close 04:19:07 Received message from Camera: op=State serial=93784 04:19:07 GetSingleValue result=40 Value=cccccccc 04:19:07 SkyScan query 04:19:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:19:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:08 Parameters OK 04:19:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:08 Set A/D data flow result=40 04:19:08 Set A/D channel type result=40 04:19:08 Set A/D encoding result=40 04:19:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:08 Set channel filter=0.000000e+000 result=40 04:19:08 Config A/D Result=40 04:19:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:08 Get A/D filter: -9.255963e+061 result=40 04:19:08 Get A/D value=-858993460 result=40 04:19:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:08 Parameters OK 04:19:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:08 Set A/D data flow result=40 04:19:08 Set A/D channel type result=40 04:19:08 Set A/D encoding result=40 04:19:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:08 Set channel filter=0.000000e+000 result=40 04:19:08 Config A/D Result=40 04:19:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:08 Get A/D filter: -9.255963e+061 result=40 04:19:08 Get A/D value=-858993460 result=40 04:19:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:08 Aux= 04:19:08 Message to Camera, serial 93784 queued 04:19:45 Received message from Master: op=PointingHead serial=93797 04:19:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:19:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:19:45 Point started: ret=0 04:19:45 point_skyscan result=0 04:19:46 Check angles 04:19:46 SkyScan query 04:19:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:19:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:19:46 Message to Master queued w/err=0: serial=93797 error=0 04:19:51 Received message from Master: op=Filter serial=93798 04:19:51 Color wheel filter change from 0 to 0 04:19:51 FLIGetFilterPos err=0 currentPosition=0 04:19:51 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:51 Filter is already there-color wheel unchanged 04:19:51 Received message from Master: op=Shutter serial=93799 04:19:51 Shutter LASER close 04:19:51 Received message from Camera: op=State serial=93801 04:19:51 GetSingleValue result=40 Value=cccccccc 04:19:51 SkyScan query 04:19:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:19:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:52 Parameters OK 04:19:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:52 Set A/D data flow result=40 04:19:52 Set A/D channel type result=40 04:19:52 Set A/D encoding result=40 04:19:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:52 Set channel filter=0.000000e+000 result=40 04:19:52 Config A/D Result=40 04:19:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:52 Get A/D filter: -9.255963e+061 result=40 04:19:52 Get A/D value=-858993460 result=40 04:19:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:52 Parameters OK 04:19:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:52 Set A/D data flow result=40 04:19:52 Set A/D channel type result=40 04:19:52 Set A/D encoding result=40 04:19:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:52 Set channel filter=0.000000e+000 result=40 04:19:52 Config A/D Result=40 04:19:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:52 Get A/D filter: -9.255963e+061 result=40 04:19:52 Get A/D value=-858993460 result=40 04:19:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:52 Aux= 04:19:52 Message to Camera, serial 93801 queued 04:20:29 Received message from Master: op=PointingHead serial=93814 04:20:29 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:20:29 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:20:29 Point started: ret=0 04:20:29 point_skyscan result=0 04:20:30 Check angles 04:20:30 SkyScan query 04:20:30 SkyScan query done: ret=0 az=135.93<-9062 ze=-6.51<-12434 Statuses=0009 0008 04:20:30 Msec=0 True Az=135.93 Ze=-6.51 Az status=0009 Ze status=0008 04:20:31 Check angles 04:20:31 SkyScan query 04:20:31 SkyScan query done: ret=0 az=153.645<-10243 ze=-6.495<-12433 Statuses=0009 0008 04:20:31 Msec=750 True Az=153.645 Ze=-6.495 Az status=0009 Ze status=0008 04:20:31 Check angles 04:20:31 SkyScan query 04:20:32 SkyScan query done: ret=0 az=171.21<-11414 ze=-6.495<-12433 Statuses=0009 0008 04:20:32 Msec=1500 True Az=171.21 Ze=-6.495 Az status=0009 Ze status=0008 04:20:32 Check angles 04:20:32 SkyScan query 04:20:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:20:33 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:20:33 Message to Master queued w/err=0: serial=93814 error=0 04:20:38 Received message from Master: op=Filter serial=93815 04:20:38 Color wheel filter change from 0 to 0 04:20:38 FLIGetFilterPos err=0 currentPosition=0 04:20:38 FLIGetStepsRemaining err=0 RemainingSteps=0 04:20:38 Filter is already there-color wheel unchanged 04:20:38 Received message from Master: op=Shutter serial=93816 04:20:38 Shutter LASER close 04:20:38 Received message from Camera: op=State serial=93818 04:20:38 GetSingleValue result=40 Value=cccccccc 04:20:38 SkyScan query 04:20:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:20:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:39 Parameters OK 04:20:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:39 Set A/D data flow result=40 04:20:39 Set A/D channel type result=40 04:20:39 Set A/D encoding result=40 04:20:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:39 Set channel filter=0.000000e+000 result=40 04:20:39 Config A/D Result=40 04:20:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:39 Get A/D filter: -9.255963e+061 result=40 04:20:39 Get A/D value=-858993460 result=40 04:20:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:39 Parameters OK 04:20:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:39 Set A/D data flow result=40 04:20:39 Set A/D channel type result=40 04:20:39 Set A/D encoding result=40 04:20:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:39 Set channel filter=0.000000e+000 result=40 04:20:39 Config A/D Result=40 04:20:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:39 Get A/D filter: -9.255963e+061 result=40 04:20:39 Get A/D value=-858993460 result=40 04:20:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:20:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:20:39 Aux= 04:20:39 Message to Camera, serial 93818 queued 04:21:15 Received message from Master: op=PointingHead serial=93831 04:21:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:21:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:21:16 Point started: ret=0 04:21:16 point_skyscan result=0 04:21:16 Check angles 04:21:16 SkyScan query 04:21:17 SkyScan query done: ret=0 az=152.64<-10176 ze=6.51<-11566 Statuses=0009 0008 04:21:17 Msec=0 True Az=152.64 Ze=6.51 Az status=0009 Ze status=0008 04:21:17 Check angles 04:21:17 SkyScan query 04:21:18 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 04:21:18 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 04:21:18 Check angles 04:21:18 SkyScan query 04:21:19 SkyScan query done: ret=0 az=117.69<-7846 ze=6.495<-11567 Statuses=0009 0008 04:21:19 Msec=1500 True Az=117.69 Ze=6.495 Az status=0009 Ze status=0008 04:21:19 Check angles 04:21:19 SkyScan query 04:21:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:21:19 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:21:19 Message to Master queued w/err=0: serial=93831 error=0 04:21:24 Received message from Master: op=Filter serial=93832 04:21:24 Color wheel filter change from 0 to 0 04:21:24 FLIGetFilterPos err=0 currentPosition=0 04:21:24 FLIGetStepsRemaining err=0 RemainingSteps=0 04:21:24 Filter is already there-color wheel unchanged 04:21:24 Received message from Master: op=Shutter serial=93833 04:21:24 Shutter LASER close 04:21:25 Received message from Camera: op=State serial=93835 04:21:25 GetSingleValue result=40 Value=cccccccc 04:21:25 SkyScan query 04:21:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:21:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:25 Parameters OK 04:21:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:25 Set A/D data flow result=40 04:21:25 Set A/D channel type result=40 04:21:25 Set A/D encoding result=40 04:21:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:25 Set channel filter=0.000000e+000 result=40 04:21:25 Config A/D Result=40 04:21:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:25 Get A/D filter: -9.255963e+061 result=40 04:21:25 Get A/D value=-858993460 result=40 04:21:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:25 Parameters OK 04:21:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:25 Set A/D data flow result=40 04:21:25 Set A/D channel type result=40 04:21:25 Set A/D encoding result=40 04:21:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:25 Set channel filter=0.000000e+000 result=40 04:21:25 Config A/D Result=40 04:21:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:25 Get A/D filter: -9.255963e+061 result=40 04:21:25 Get A/D value=-858993460 result=40 04:21:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:21:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:21:25 Aux= 04:21:25 Message to Camera, serial 93835 queued 04:22:02 Received message from Master: op=PointingHead serial=93848 04:22:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:22:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:22:02 Point started: ret=0 04:22:02 point_skyscan result=0 04:22:03 Check angles 04:22:03 SkyScan query 04:22:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 04:22:04 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 04:22:04 Check angles 04:22:04 SkyScan query 04:22:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.28<-14952 Statuses=0008 0009 04:22:04 Msec=750 True Az=112.995 Ze=-44.28 Az status=0008 Ze status=0009 04:22:04 Check angles 04:22:04 SkyScan query 04:22:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 04:22:05 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 04:22:05 Check angles 04:22:05 SkyScan query 04:22:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.19<-17746 Statuses=0008 0009 04:22:06 Msec=2250 True Az=112.995 Ze=-86.19 Az status=0008 Ze status=0009 04:22:06 Check angles 04:22:06 SkyScan query 04:22:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.13<-19142 Statuses=0008 0009 04:22:07 Msec=3000 True Az=112.995 Ze=-107.13 Az status=0008 Ze status=0009 04:22:07 Check angles 04:22:07 SkyScan query 04:22:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.085<-20539 Statuses=0008 0009 04:22:07 Msec=3750 True Az=112.995 Ze=-128.085 Az status=0008 Ze status=0009 04:22:07 Check angles 04:22:07 SkyScan query 04:22:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.04<-21936 Statuses=0008 0009 04:22:08 Msec=4500 True Az=112.995 Ze=-149.04 Az status=0008 Ze status=0009 04:22:08 Check angles 04:22:08 SkyScan query 04:22:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.995<-23333 Statuses=0008 0009 04:22:09 Msec=5250 True Az=112.995 Ze=-169.995 Az status=0008 Ze status=0009 04:22:09 Check angles 04:22:09 SkyScan query 04:22:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:22:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:22:10 Message to Master queued w/err=0: serial=93848 error=0 04:22:15 Received message from Master: op=Filter serial=93849 04:22:15 Color wheel filter change from 0 to 0 04:22:15 FLIGetFilterPos err=0 currentPosition=0 04:22:15 FLIGetStepsRemaining err=0 RemainingSteps=0 04:22:15 Filter is already there-color wheel unchanged 04:22:15 Received message from Master: op=Shutter serial=93850 04:22:15 Shutter LASER open 04:22:15 Received message from Camera: op=State serial=93852 04:22:15 GetSingleValue result=40 Value=cccccccc 04:22:15 SkyScan query 04:22:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:22:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:15 Parameters OK 04:22:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:15 Set A/D data flow result=40 04:22:15 Set A/D channel type result=40 04:22:15 Set A/D encoding result=40 04:22:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:15 Set channel filter=0.000000e+000 result=40 04:22:15 Config A/D Result=40 04:22:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:15 Get A/D filter: -9.255963e+061 result=40 04:22:15 Get A/D value=-858993460 result=40 04:22:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:15 Parameters OK 04:22:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:15 Set A/D data flow result=40 04:22:15 Set A/D channel type result=40 04:22:15 Set A/D encoding result=40 04:22:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:15 Set channel filter=0.000000e+000 result=40 04:22:15 Config A/D Result=40 04:22:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:15 Get A/D filter: -9.255963e+061 result=40 04:22:15 Get A/D value=-858993460 result=40 04:22:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:22:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:22:15 Aux= 04:22:15 Message to Camera, serial 93852 queued 04:22:24 Received message from Master: op=Shutter serial=93862 04:22:24 Shutter LASER close 04:22:24 Received message from Master: op=PointingHead serial=93866 04:22:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:22:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:22:25 Point started: ret=0 04:22:25 point_skyscan result=0 04:22:25 Check angles 04:22:25 SkyScan query 04:22:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 04:22:26 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 04:22:26 Check angles 04:22:26 SkyScan query 04:22:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.665<-20111 Statuses=0008 0009 04:22:27 Msec=750 True Az=112.995 Ze=-121.665 Az status=0008 Ze status=0009 04:22:27 Check angles 04:22:27 SkyScan query 04:22:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.74<-18716 Statuses=0008 0009 04:22:28 Msec=1500 True Az=112.995 Ze=-100.74 Az status=0008 Ze status=0009 04:22:28 Check angles 04:22:28 SkyScan query 04:22:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.77<-17318 Statuses=0008 0009 04:22:28 Msec=2250 True Az=112.995 Ze=-79.77 Az status=0008 Ze status=0009 04:22:28 Check angles 04:22:28 SkyScan query 04:22:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.83<-15922 Statuses=0008 0009 04:22:29 Msec=3000 True Az=112.995 Ze=-58.83 Az status=0008 Ze status=0009 04:22:29 Check angles 04:22:29 SkyScan query 04:22:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.845<-14523 Statuses=0008 0009 04:22:30 Msec=3750 True Az=112.995 Ze=-37.845 Az status=0008 Ze status=0009 04:22:30 Check angles 04:22:30 SkyScan query 04:22:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.905<-13127 Statuses=0008 0009 04:22:31 Msec=4500 True Az=112.995 Ze=-16.905 Az status=0008 Ze status=0009 04:22:31 Check angles 04:22:31 SkyScan query 04:22:31 SkyScan query done: ret=0 az=112.995<-7533 ze=4.05<-11730 Statuses=0008 0009 04:22:31 Msec=5250 True Az=112.995 Ze=4.05 Az status=0008 Ze status=0009 04:22:31 Check angles 04:22:31 SkyScan query 04:22:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:22:32 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:22:32 Message to Master queued w/err=0: serial=93866 error=0 04:22:37 Received message from Master: op=Filter serial=93867 04:22:37 Color wheel filter change from 0 to 0 04:22:37 FLIGetFilterPos err=0 currentPosition=0 04:22:37 FLIGetStepsRemaining err=0 RemainingSteps=0 04:22:37 Filter is already there-color wheel unchanged 04:22:37 Received message from Master: op=Shutter serial=93868 04:22:37 Shutter LASER close 04:22:37 Received message from Camera: op=State serial=93870 04:22:37 GetSingleValue result=40 Value=cccccccc 04:22:37 SkyScan query 04:22:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:22:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:38 Parameters OK 04:22:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:38 Set A/D data flow result=40 04:22:38 Set A/D channel type result=40 04:22:38 Set A/D encoding result=40 04:22:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:38 Set channel filter=0.000000e+000 result=40 04:22:38 Config A/D Result=40 04:22:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:38 Get A/D filter: -9.255963e+061 result=40 04:22:38 Get A/D value=-858993460 result=40 04:22:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:38 Parameters OK 04:22:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:38 Set A/D data flow result=40 04:22:38 Set A/D channel type result=40 04:22:38 Set A/D encoding result=40 04:22:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:38 Set channel filter=0.000000e+000 result=40 04:22:38 Config A/D Result=40 04:22:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:38 Get A/D filter: -9.255963e+061 result=40 04:22:38 Get A/D value=-858993460 result=40 04:22:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:22:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:22:38 Aux= 04:22:38 Message to Camera, serial 93870 queued 04:23:15 Received message from Master: op=PointingHead serial=93883 04:23:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:23:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:23:15 Point started: ret=0 04:23:15 point_skyscan result=0 04:23:16 Check angles 04:23:16 SkyScan query 04:23:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:23:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:23:16 Message to Master queued w/err=0: serial=93883 error=0 04:23:21 Received message from Master: op=Filter serial=93884 04:23:21 Color wheel filter change from 0 to 0 04:23:21 FLIGetFilterPos err=0 currentPosition=0 04:23:21 FLIGetStepsRemaining err=0 RemainingSteps=0 04:23:21 Filter is already there-color wheel unchanged 04:23:22 Received message from Master: op=Shutter serial=93885 04:23:22 Shutter LASER close 04:23:22 Received message from Camera: op=State serial=93887 04:23:22 GetSingleValue result=40 Value=cccccccc 04:23:22 SkyScan query 04:23:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:23:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:22 Parameters OK 04:23:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:22 Set A/D data flow result=40 04:23:22 Set A/D channel type result=40 04:23:22 Set A/D encoding result=40 04:23:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:22 Set channel filter=0.000000e+000 result=40 04:23:22 Config A/D Result=40 04:23:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:22 Get A/D filter: -9.255963e+061 result=40 04:23:22 Get A/D value=-858993460 result=40 04:23:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:22 Parameters OK 04:23:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:22 Set A/D data flow result=40 04:23:22 Set A/D channel type result=40 04:23:22 Set A/D encoding result=40 04:23:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:22 Set channel filter=0.000000e+000 result=40 04:23:22 Config A/D Result=40 04:23:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:22 Get A/D filter: -9.255963e+061 result=40 04:23:22 Get A/D value=-858993460 result=40 04:23:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:23:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:23:22 Aux= 04:23:22 Message to Camera, serial 93887 queued [UTC 2019-3-4 04:23:50] 04:23:58 Received message from Master: op=PointingHead serial=93899 04:23:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:23:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:23:59 Point started: ret=0 04:23:59 point_skyscan result=0 04:23:59 Check angles 04:23:59 SkyScan query 04:24:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:24:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:24:00 Message to Master queued w/err=0: serial=93899 error=0 04:24:05 Received message from Master: op=Filter serial=93900 04:24:05 Color wheel filter change from 0 to 0 04:24:05 FLIGetFilterPos err=0 currentPosition=0 04:24:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:24:05 Filter is already there-color wheel unchanged 04:24:05 Received message from Master: op=Shutter serial=93901 04:24:05 Shutter LASER close 04:24:05 Received message from Camera: op=State serial=93903 04:24:05 GetSingleValue result=40 Value=cccccccc 04:24:05 SkyScan query 04:24:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:24:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:06 Parameters OK 04:24:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:06 Set A/D data flow result=40 04:24:06 Set A/D channel type result=40 04:24:06 Set A/D encoding result=40 04:24:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:06 Set channel filter=0.000000e+000 result=40 04:24:06 Config A/D Result=40 04:24:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:06 Get A/D filter: -9.255963e+061 result=40 04:24:06 Get A/D value=-858993460 result=40 04:24:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:06 Parameters OK 04:24:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:06 Set A/D data flow result=40 04:24:06 Set A/D channel type result=40 04:24:06 Set A/D encoding result=40 04:24:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:06 Set channel filter=0.000000e+000 result=40 04:24:06 Config A/D Result=40 04:24:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:06 Get A/D filter: -9.255963e+061 result=40 04:24:06 Get A/D value=-858993460 result=40 04:24:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:24:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:24:06 Aux= 04:24:06 Message to Camera, serial 93903 queued 04:24:43 Received message from Master: op=PointingHead serial=93916 04:24:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:24:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:24:43 Point started: ret=0 04:24:43 point_skyscan result=0 04:24:44 Check angles 04:24:44 SkyScan query 04:24:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:24:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:24:44 Message to Master queued w/err=0: serial=93916 error=0 04:24:49 Received message from Master: op=Filter serial=93917 04:24:49 Color wheel filter change from 0 to 0 04:24:49 FLIGetFilterPos err=0 currentPosition=0 04:24:49 FLIGetStepsRemaining err=0 RemainingSteps=0 04:24:49 Filter is already there-color wheel unchanged 04:24:49 Received message from Master: op=Shutter serial=93918 04:24:49 Shutter LASER close 04:24:49 Received message from Camera: op=State serial=93920 04:24:49 GetSingleValue result=40 Value=cccccccc 04:24:49 SkyScan query 04:24:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:24:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:50 Parameters OK 04:24:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:50 Set A/D data flow result=40 04:24:50 Set A/D channel type result=40 04:24:50 Set A/D encoding result=40 04:24:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:50 Set channel filter=0.000000e+000 result=40 04:24:50 Config A/D Result=40 04:24:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:50 Get A/D filter: -9.255963e+061 result=40 04:24:50 Get A/D value=-858993460 result=40 04:24:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:50 Parameters OK 04:24:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:50 Set A/D data flow result=40 04:24:50 Set A/D channel type result=40 04:24:50 Set A/D encoding result=40 04:24:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:50 Set channel filter=0.000000e+000 result=40 04:24:50 Config A/D Result=40 04:24:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:50 Get A/D filter: -9.255963e+061 result=40 04:24:50 Get A/D value=-858993460 result=40 04:24:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:24:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:24:50 Aux= 04:24:50 Message to Camera, serial 93920 queued 04:25:27 Received message from Master: op=PointingHead serial=93933 04:25:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:25:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:25:27 Point started: ret=0 04:25:27 point_skyscan result=0 04:25:28 Check angles 04:25:28 SkyScan query 04:25:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.895<-13593 Statuses=0008 0009 04:25:29 Msec=0 True Az=112.995 Ze=-23.895 Az status=0008 Ze status=0009 04:25:29 Check angles 04:25:29 SkyScan query 04:25:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.835<-14989 Statuses=0008 0009 04:25:29 Msec=750 True Az=112.995 Ze=-44.835 Az status=0008 Ze status=0009 04:25:29 Check angles 04:25:29 SkyScan query 04:25:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.79<-16386 Statuses=0008 0009 04:25:30 Msec=1500 True Az=112.995 Ze=-65.79 Az status=0008 Ze status=0009 04:25:30 Check angles 04:25:30 SkyScan query 04:25:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.73<-17782 Statuses=0008 0009 04:25:31 Msec=2250 True Az=112.995 Ze=-86.73 Az status=0008 Ze status=0009 04:25:31 Check angles 04:25:31 SkyScan query 04:25:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.7<-19180 Statuses=0008 0009 04:25:32 Msec=3000 True Az=112.995 Ze=-107.7 Az status=0008 Ze status=0009 04:25:32 Check angles 04:25:32 SkyScan query 04:25:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.625<-20575 Statuses=0008 0009 04:25:32 Msec=3750 True Az=112.995 Ze=-128.625 Az status=0008 Ze status=0009 04:25:32 Check angles 04:25:32 SkyScan query 04:25:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.595<-21973 Statuses=0008 0009 04:25:33 Msec=4500 True Az=112.995 Ze=-149.595 Az status=0008 Ze status=0009 04:25:33 Check angles 04:25:33 SkyScan query 04:25:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.535<-23369 Statuses=0008 0009 04:25:34 Msec=5250 True Az=112.995 Ze=-170.535 Az status=0008 Ze status=0009 04:25:34 Check angles 04:25:34 SkyScan query 04:25:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:25:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:25:35 Message to Master queued w/err=0: serial=93933 error=0 04:25:40 Received message from Master: op=Filter serial=93934 04:25:40 Color wheel filter change from 0 to 0 04:25:40 FLIGetFilterPos err=0 currentPosition=0 04:25:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:25:40 Filter is already there-color wheel unchanged 04:25:40 Received message from Master: op=Shutter serial=93935 04:25:40 Shutter LASER open 04:25:40 Received message from Camera: op=State serial=93937 04:25:40 GetSingleValue result=40 Value=cccccccc 04:25:40 SkyScan query 04:25:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:25:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:40 Parameters OK 04:25:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:40 Set A/D data flow result=40 04:25:40 Set A/D channel type result=40 04:25:40 Set A/D encoding result=40 04:25:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:40 Set channel filter=0.000000e+000 result=40 04:25:40 Config A/D Result=40 04:25:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:40 Get A/D filter: -9.255963e+061 result=40 04:25:40 Get A/D value=-858993460 result=40 04:25:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:40 Parameters OK 04:25:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:40 Set A/D data flow result=40 04:25:40 Set A/D channel type result=40 04:25:40 Set A/D encoding result=40 04:25:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:40 Set channel filter=0.000000e+000 result=40 04:25:40 Config A/D Result=40 04:25:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:40 Get A/D filter: -9.255963e+061 result=40 04:25:40 Get A/D value=-858993460 result=40 04:25:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:25:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:25:40 Aux= 04:25:40 Message to Camera, serial 93937 queued 04:25:49 Received message from Master: op=Shutter serial=93947 04:25:49 Shutter LASER close 04:25:49 Received message from Master: op=PointingHead serial=93951 04:25:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:25:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:25:50 Point started: ret=0 04:25:50 point_skyscan result=0 04:25:51 Check angles 04:25:51 SkyScan query 04:25:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.695<-21513 Statuses=0008 0009 04:25:51 Msec=0 True Az=112.995 Ze=-142.695 Az status=0008 Ze status=0009 04:25:51 Check angles 04:25:51 SkyScan query 04:25:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.725<-20115 Statuses=0008 0009 04:25:52 Msec=750 True Az=112.995 Ze=-121.725 Az status=0008 Ze status=0009 04:25:52 Check angles 04:25:52 SkyScan query 04:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.8<-18720 Statuses=0008 0009 04:25:53 Msec=1500 True Az=112.995 Ze=-100.8 Az status=0008 Ze status=0009 04:25:53 Check angles 04:25:53 SkyScan query 04:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.845<-17323 Statuses=0008 0009 04:25:53 Msec=2250 True Az=112.995 Ze=-79.845 Az status=0008 Ze status=0009 04:25:54 Check angles 04:25:54 SkyScan query 04:25:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.905<-15927 Statuses=0008 0009 04:25:54 Msec=3000 True Az=112.995 Ze=-58.905 Az status=0008 Ze status=0009 04:25:54 Check angles 04:25:54 SkyScan query 04:25:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.92<-14528 Statuses=0008 0009 04:25:55 Msec=3750 True Az=112.995 Ze=-37.92 Az status=0008 Ze status=0009 04:25:55 Check angles 04:25:55 SkyScan query 04:25:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.98<-13132 Statuses=0008 0009 04:25:56 Msec=4500 True Az=112.995 Ze=-16.98 Az status=0008 Ze status=0009 04:25:56 Check angles 04:25:56 SkyScan query 04:25:56 SkyScan query done: ret=0 az=112.995<-7533 ze=3.975<-11735 Statuses=0008 0009 04:25:56 Msec=5250 True Az=112.995 Ze=3.975 Az status=0008 Ze status=0009 04:25:57 Check angles 04:25:57 SkyScan query 04:25:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:25:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:25:57 Message to Master queued w/err=0: serial=93951 error=0 04:26:02 Received message from Master: op=Filter serial=93952 04:26:02 Color wheel filter change from 0 to 0 04:26:02 FLIGetFilterPos err=0 currentPosition=0 04:26:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:02 Filter is already there-color wheel unchanged 04:26:02 Received message from Master: op=Shutter serial=93953 04:26:02 Shutter LASER close 04:26:03 Received message from Camera: op=State serial=93955 04:26:03 GetSingleValue result=40 Value=cccccccc 04:26:03 SkyScan query 04:26:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:26:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:03 Parameters OK 04:26:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:03 Set A/D data flow result=40 04:26:03 Set A/D channel type result=40 04:26:03 Set A/D encoding result=40 04:26:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:03 Set channel filter=0.000000e+000 result=40 04:26:03 Config A/D Result=40 04:26:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:03 Get A/D filter: -9.255963e+061 result=40 04:26:03 Get A/D value=-858993460 result=40 04:26:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:03 Parameters OK 04:26:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:03 Set A/D data flow result=40 04:26:03 Set A/D channel type result=40 04:26:03 Set A/D encoding result=40 04:26:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:03 Set channel filter=0.000000e+000 result=40 04:26:03 Config A/D Result=40 04:26:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:03 Get A/D filter: -9.255963e+061 result=40 04:26:03 Get A/D value=-858993460 result=40 04:26:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:03 Aux= 04:26:03 Message to Camera, serial 93955 queued 04:26:40 Received message from Master: op=PointingHead serial=93968 04:26:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:26:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:26:40 Point started: ret=0 04:26:40 point_skyscan result=0 04:26:41 Check angles 04:26:41 SkyScan query 04:26:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:26:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:26:42 Message to Master queued w/err=0: serial=93968 error=0 04:26:47 Received message from Master: op=Filter serial=93969 04:26:47 Color wheel filter change from 0 to 0 04:26:47 FLIGetFilterPos err=0 currentPosition=0 04:26:47 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:47 Filter is already there-color wheel unchanged 04:26:47 Received message from Master: op=Shutter serial=93970 04:26:47 Shutter LASER close 04:26:47 Received message from Camera: op=State serial=93972 04:26:47 GetSingleValue result=40 Value=cccccccc 04:26:47 SkyScan query 04:26:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:26:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:47 Parameters OK 04:26:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:47 Set A/D data flow result=40 04:26:47 Set A/D channel type result=40 04:26:47 Set A/D encoding result=40 04:26:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:47 Set channel filter=0.000000e+000 result=40 04:26:47 Config A/D Result=40 04:26:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:47 Get A/D filter: -9.255963e+061 result=40 04:26:47 Get A/D value=-858993460 result=40 04:26:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:47 Parameters OK 04:26:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:47 Set A/D data flow result=40 04:26:47 Set A/D channel type result=40 04:26:47 Set A/D encoding result=40 04:26:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:47 Set channel filter=0.000000e+000 result=40 04:26:47 Config A/D Result=40 04:26:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:47 Get A/D filter: -9.255963e+061 result=40 04:26:47 Get A/D value=-858993460 result=40 04:26:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:47 Aux= 04:26:47 Message to Camera, serial 93972 queued 04:27:24 Received message from Master: op=PointingHead serial=93985 04:27:24 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:27:24 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:27:25 Point started: ret=0 04:27:25 point_skyscan result=0 04:27:25 Check angles 04:27:25 SkyScan query 04:27:26 SkyScan query done: ret=0 az=136.08<-9072 ze=-6.51<-12434 Statuses=0009 0008 04:27:26 Msec=0 True Az=136.08 Ze=-6.51 Az status=0009 Ze status=0008 04:27:26 Check angles 04:27:26 SkyScan query 04:27:27 SkyScan query done: ret=0 az=153.585<-10239 ze=-6.495<-12433 Statuses=0009 0008 04:27:27 Msec=750 True Az=153.585 Ze=-6.495 Az status=0009 Ze status=0008 04:27:27 Check angles 04:27:27 SkyScan query 04:27:27 SkyScan query done: ret=0 az=171.42<-11428 ze=-6.495<-12433 Statuses=0009 0008 04:27:27 Msec=1500 True Az=171.42 Ze=-6.495 Az status=0009 Ze status=0008 04:27:28 Check angles 04:27:28 SkyScan query 04:27:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:27:28 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:27:28 Message to Master queued w/err=0: serial=93985 error=0 04:27:33 Received message from Master: op=Filter serial=93986 04:27:33 Color wheel filter change from 0 to 0 04:27:33 FLIGetFilterPos err=0 currentPosition=0 04:27:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:27:33 Filter is already there-color wheel unchanged 04:27:33 Received message from Master: op=Shutter serial=93987 04:27:33 Shutter LASER close 04:27:33 Received message from Camera: op=State serial=93989 04:27:33 GetSingleValue result=40 Value=cccccccc 04:27:33 SkyScan query 04:27:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:27:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:34 Parameters OK 04:27:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:34 Set A/D data flow result=40 04:27:34 Set A/D channel type result=40 04:27:34 Set A/D encoding result=40 04:27:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:34 Set channel filter=0.000000e+000 result=40 04:27:34 Config A/D Result=40 04:27:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:34 Get A/D filter: -9.255963e+061 result=40 04:27:34 Get A/D value=-858993460 result=40 04:27:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:34 Parameters OK 04:27:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:34 Set A/D data flow result=40 04:27:34 Set A/D channel type result=40 04:27:34 Set A/D encoding result=40 04:27:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:34 Set channel filter=0.000000e+000 result=40 04:27:34 Config A/D Result=40 04:27:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:34 Get A/D filter: -9.255963e+061 result=40 04:27:34 Get A/D value=-858993460 result=40 04:27:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:27:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:27:34 Aux= 04:27:34 Message to Camera, serial 93989 queued 04:28:11 Received message from Master: op=PointingHead serial=94002 04:28:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:28:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:28:11 Point started: ret=0 04:28:11 point_skyscan result=0 04:28:12 Check angles 04:28:12 SkyScan query 04:28:12 SkyScan query done: ret=0 az=152.73<-10182 ze=6.51<-11566 Statuses=0009 0008 04:28:12 Msec=0 True Az=152.73 Ze=6.51 Az status=0009 Ze status=0008 04:28:13 Check angles 04:28:13 SkyScan query 04:28:13 SkyScan query done: ret=0 az=135.12<-9008 ze=6.495<-11567 Statuses=0009 0008 04:28:13 Msec=750 True Az=135.12 Ze=6.495 Az status=0009 Ze status=0008 04:28:13 Check angles 04:28:13 SkyScan query 04:28:14 SkyScan query done: ret=0 az=117.435<-7829 ze=6.495<-11567 Statuses=0009 0008 04:28:14 Msec=1500 True Az=117.435 Ze=6.495 Az status=0009 Ze status=0008 04:28:14 Check angles 04:28:14 SkyScan query 04:28:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:28:15 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:28:15 Message to Master queued w/err=0: serial=94002 error=0 04:28:20 Received message from Master: op=Filter serial=94003 04:28:20 Color wheel filter change from 0 to 0 04:28:20 FLIGetFilterPos err=0 currentPosition=0 04:28:20 FLIGetStepsRemaining err=0 RemainingSteps=0 04:28:20 Filter is already there-color wheel unchanged 04:28:20 Received message from Master: op=Shutter serial=94004 04:28:20 Shutter LASER close 04:28:20 Received message from Camera: op=State serial=94006 04:28:20 GetSingleValue result=40 Value=cccccccc 04:28:20 SkyScan query 04:28:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:28:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:21 Parameters OK 04:28:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:21 Set A/D data flow result=40 04:28:21 Set A/D channel type result=40 04:28:21 Set A/D encoding result=40 04:28:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:21 Set channel filter=0.000000e+000 result=40 04:28:21 Config A/D Result=40 04:28:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:21 Get A/D filter: -9.255963e+061 result=40 04:28:21 Get A/D value=-858993460 result=40 04:28:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:21 Parameters OK 04:28:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:21 Set A/D data flow result=40 04:28:21 Set A/D channel type result=40 04:28:21 Set A/D encoding result=40 04:28:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:21 Set channel filter=0.000000e+000 result=40 04:28:21 Config A/D Result=40 04:28:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:21 Get A/D filter: -9.255963e+061 result=40 04:28:21 Get A/D value=-858993460 result=40 04:28:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:28:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:28:21 Aux= 04:28:21 Message to Camera, serial 94006 queued 04:28:57 Received message from Master: op=PointingHead serial=94019 04:28:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:28:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:28:58 Point started: ret=0 04:28:58 point_skyscan result=0 04:28:59 Check angles 04:28:59 SkyScan query 04:28:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 04:28:59 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 04:28:59 Check angles 04:28:59 SkyScan query 04:29:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 04:29:00 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 04:29:00 Check angles 04:29:00 SkyScan query 04:29:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.625<-16375 Statuses=0008 0009 04:29:01 Msec=1500 True Az=112.995 Ze=-65.625 Az status=0008 Ze status=0009 04:29:01 Check angles 04:29:01 SkyScan query 04:29:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.565<-17771 Statuses=0008 0009 04:29:01 Msec=2250 True Az=112.995 Ze=-86.565 Az status=0008 Ze status=0009 04:29:02 Check angles 04:29:02 SkyScan query 04:29:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.52<-19168 Statuses=0008 0009 04:29:02 Msec=3000 True Az=112.995 Ze=-107.52 Az status=0008 Ze status=0009 04:29:02 Check angles 04:29:02 SkyScan query 04:29:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.895<-20593 Statuses=0008 0009 04:29:03 Msec=3750 True Az=112.995 Ze=-128.895 Az status=0008 Ze status=0009 04:29:03 Check angles 04:29:03 SkyScan query 04:29:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.315<-22021 Statuses=0008 0009 04:29:04 Msec=4500 True Az=112.995 Ze=-150.315 Az status=0008 Ze status=0009 04:29:04 Check angles 04:29:04 SkyScan query 04:29:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.09<-23406 Statuses=0008 0009 04:29:04 Msec=5250 True Az=112.995 Ze=-171.09 Az status=0008 Ze status=0009 04:29:05 Check angles 04:29:05 SkyScan query 04:29:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:29:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:29:05 Message to Master queued w/err=0: serial=94019 error=0 04:29:10 Received message from Master: op=Filter serial=94020 04:29:10 Color wheel filter change from 0 to 0 04:29:10 FLIGetFilterPos err=0 currentPosition=0 04:29:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:10 Filter is already there-color wheel unchanged 04:29:10 Received message from Master: op=Shutter serial=94021 04:29:10 Shutter LASER open 04:29:11 Received message from Camera: op=State serial=94023 04:29:11 GetSingleValue result=40 Value=cccccccc 04:29:11 SkyScan query 04:29:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:29:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:11 Parameters OK 04:29:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:11 Set A/D data flow result=40 04:29:11 Set A/D channel type result=40 04:29:11 Set A/D encoding result=40 04:29:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:11 Set channel filter=0.000000e+000 result=40 04:29:11 Config A/D Result=40 04:29:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:11 Get A/D filter: -9.255963e+061 result=40 04:29:11 Get A/D value=-858993460 result=40 04:29:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:11 Parameters OK 04:29:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:11 Set A/D data flow result=40 04:29:11 Set A/D channel type result=40 04:29:11 Set A/D encoding result=40 04:29:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:11 Set channel filter=0.000000e+000 result=40 04:29:11 Config A/D Result=40 04:29:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:11 Get A/D filter: -9.255963e+061 result=40 04:29:11 Get A/D value=-858993460 result=40 04:29:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:29:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:29:11 Aux= 04:29:11 Message to Camera, serial 94023 queued 04:29:20 Received message from Master: op=Shutter serial=94033 04:29:20 Shutter LASER close 04:29:20 Received message from Master: op=PointingHead serial=94037 04:29:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:29:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:29:20 Point started: ret=0 04:29:20 point_skyscan result=0 04:29:21 Check angles 04:29:21 SkyScan query 04:29:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 04:29:22 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 04:29:22 Check angles 04:29:22 SkyScan query 04:29:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.115<-20141 Statuses=0008 0009 04:29:22 Msec=750 True Az=112.995 Ze=-122.115 Az status=0008 Ze status=0009 04:29:23 Check angles 04:29:23 SkyScan query 04:29:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.74<-18716 Statuses=0008 0009 04:29:23 Msec=1500 True Az=112.995 Ze=-100.74 Az status=0008 Ze status=0009 04:29:23 Check angles 04:29:23 SkyScan query 04:29:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.785<-17319 Statuses=0008 0009 04:29:24 Msec=2250 True Az=112.995 Ze=-79.785 Az status=0008 Ze status=0009 04:29:24 Check angles 04:29:24 SkyScan query 04:29:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.845<-15923 Statuses=0008 0009 04:29:25 Msec=3000 True Az=112.995 Ze=-58.845 Az status=0008 Ze status=0009 04:29:25 Check angles 04:29:25 SkyScan query 04:29:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.455<-14497 Statuses=0008 0009 04:29:25 Msec=3750 True Az=112.995 Ze=-37.455 Az status=0008 Ze status=0009 04:29:26 Check angles 04:29:26 SkyScan query 04:29:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.035<-13069 Statuses=0008 0009 04:29:26 Msec=4500 True Az=112.995 Ze=-16.035 Az status=0008 Ze status=0009 04:29:26 Check angles 04:29:26 SkyScan query 04:29:27 SkyScan query done: ret=0 az=112.995<-7533 ze=4.725<-11685 Statuses=0008 0009 04:29:27 Msec=5250 True Az=112.995 Ze=4.725 Az status=0008 Ze status=0009 04:29:27 Check angles 04:29:27 SkyScan query 04:29:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:29:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:29:28 Message to Master queued w/err=0: serial=94037 error=0 04:29:33 Received message from Master: op=Filter serial=94038 04:29:33 Color wheel filter change from 0 to 0 04:29:33 FLIGetFilterPos err=0 currentPosition=0 04:29:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:33 Filter is already there-color wheel unchanged 04:29:33 Received message from Master: op=Shutter serial=94039 04:29:33 Shutter LASER close 04:29:33 Received message from Camera: op=State serial=94041 04:29:33 GetSingleValue result=40 Value=cccccccc 04:29:33 SkyScan query 04:29:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:29:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:34 Parameters OK 04:29:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:34 Set A/D data flow result=40 04:29:34 Set A/D channel type result=40 04:29:34 Set A/D encoding result=40 04:29:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:34 Set channel filter=0.000000e+000 result=40 04:29:34 Config A/D Result=40 04:29:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:34 Get A/D filter: -9.255963e+061 result=40 04:29:34 Get A/D value=-858993460 result=40 04:29:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:34 Parameters OK 04:29:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:34 Set A/D data flow result=40 04:29:34 Set A/D channel type result=40 04:29:34 Set A/D encoding result=40 04:29:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:34 Set channel filter=0.000000e+000 result=40 04:29:34 Config A/D Result=40 04:29:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:34 Get A/D filter: -9.255963e+061 result=40 04:29:34 Get A/D value=-858993460 result=40 04:29:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:29:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:29:34 Aux= 04:29:34 Message to Camera, serial 94041 queued 04:30:10 Received message from Master: op=PointingHead serial=94054 04:30:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:30:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:30:11 Point started: ret=0 04:30:11 point_skyscan result=0 04:30:11 Check angles 04:30:11 SkyScan query 04:30:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:30:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:30:12 Message to Master queued w/err=0: serial=94054 error=0 04:30:17 Received message from Master: op=Filter serial=94055 04:30:17 Color wheel filter change from 0 to 0 04:30:17 FLIGetFilterPos err=0 currentPosition=0 04:30:17 FLIGetStepsRemaining err=0 RemainingSteps=0 04:30:17 Filter is already there-color wheel unchanged 04:30:17 Received message from Master: op=Shutter serial=94056 04:30:17 Shutter LASER close 04:30:17 Received message from Camera: op=State serial=94058 04:30:17 GetSingleValue result=40 Value=cccccccc 04:30:17 SkyScan query 04:30:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:30:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:18 Parameters OK 04:30:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:18 Set A/D data flow result=40 04:30:18 Set A/D channel type result=40 04:30:18 Set A/D encoding result=40 04:30:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:18 Set channel filter=0.000000e+000 result=40 04:30:18 Config A/D Result=40 04:30:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:18 Get A/D filter: -9.255963e+061 result=40 04:30:18 Get A/D value=-858993460 result=40 04:30:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:18 Parameters OK 04:30:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:18 Set A/D data flow result=40 04:30:18 Set A/D channel type result=40 04:30:18 Set A/D encoding result=40 04:30:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:18 Set channel filter=0.000000e+000 result=40 04:30:18 Config A/D Result=40 04:30:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:18 Get A/D filter: -9.255963e+061 result=40 04:30:18 Get A/D value=-858993460 result=40 04:30:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:30:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:30:18 Aux= 04:30:18 Message to Camera, serial 94058 queued 04:30:55 Received message from Master: op=PointingHead serial=94071 04:30:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:30:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:30:55 Point started: ret=0 04:30:55 point_skyscan result=0 04:30:56 Check angles 04:30:56 SkyScan query 04:30:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:30:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:30:56 Message to Master queued w/err=0: serial=94071 error=0 04:31:01 Received message from Master: op=Filter serial=94072 04:31:01 Color wheel filter change from 0 to 0 04:31:01 FLIGetFilterPos err=0 currentPosition=0 04:31:01 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:01 Filter is already there-color wheel unchanged 04:31:02 Received message from Master: op=Shutter serial=94073 04:31:02 Shutter LASER close 04:31:02 Received message from Camera: op=State serial=94075 04:31:02 GetSingleValue result=40 Value=cccccccc 04:31:02 SkyScan query 04:31:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:31:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:02 Parameters OK 04:31:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:02 Set A/D data flow result=40 04:31:02 Set A/D channel type result=40 04:31:02 Set A/D encoding result=40 04:31:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:02 Set channel filter=0.000000e+000 result=40 04:31:02 Config A/D Result=40 04:31:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:02 Get A/D filter: -9.255963e+061 result=40 04:31:02 Get A/D value=-858993460 result=40 04:31:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:02 Parameters OK 04:31:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:02 Set A/D data flow result=40 04:31:02 Set A/D channel type result=40 04:31:02 Set A/D encoding result=40 04:31:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:02 Set channel filter=0.000000e+000 result=40 04:31:02 Config A/D Result=40 04:31:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:02 Get A/D filter: -9.255963e+061 result=40 04:31:02 Get A/D value=-858993460 result=40 04:31:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:02 Aux= 04:31:02 Message to Camera, serial 94075 queued 04:31:39 Received message from Master: op=PointingHead serial=94088 04:31:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:31:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:31:39 Point started: ret=0 04:31:39 point_skyscan result=0 04:31:40 Check angles 04:31:40 SkyScan query 04:31:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:31:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:31:41 Message to Master queued w/err=0: serial=94088 error=0 04:31:46 Received message from Master: op=Filter serial=94089 04:31:46 Color wheel filter change from 0 to 0 04:31:46 FLIGetFilterPos err=0 currentPosition=0 04:31:46 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:46 Filter is already there-color wheel unchanged 04:31:46 Received message from Master: op=Shutter serial=94090 04:31:46 Shutter LASER close 04:31:46 Received message from Camera: op=State serial=94092 04:31:46 GetSingleValue result=40 Value=cccccccc 04:31:46 SkyScan query 04:31:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:31:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:46 Parameters OK 04:31:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:46 Set A/D data flow result=40 04:31:46 Set A/D channel type result=40 04:31:46 Set A/D encoding result=40 04:31:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:46 Set channel filter=0.000000e+000 result=40 04:31:46 Config A/D Result=40 04:31:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:46 Get A/D filter: -9.255963e+061 result=40 04:31:46 Get A/D value=-858993460 result=40 04:31:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:46 Parameters OK 04:31:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:46 Set A/D data flow result=40 04:31:46 Set A/D channel type result=40 04:31:46 Set A/D encoding result=40 04:31:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:46 Set channel filter=0.000000e+000 result=40 04:31:46 Config A/D Result=40 04:31:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:46 Get A/D filter: -9.255963e+061 result=40 04:31:46 Get A/D value=-858993460 result=40 04:31:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:46 Aux= 04:31:46 Message to Camera, serial 94092 queued 04:32:23 Received message from Master: op=PointingHead serial=94105 04:32:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:32:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:32:24 Point started: ret=0 04:32:24 point_skyscan result=0 04:32:24 Check angles 04:32:24 SkyScan query 04:32:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 04:32:25 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 04:32:25 Check angles 04:32:25 SkyScan query 04:32:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.115<-14941 Statuses=0008 0009 04:32:26 Msec=750 True Az=112.995 Ze=-44.115 Az status=0008 Ze status=0009 04:32:26 Check angles 04:32:26 SkyScan query 04:32:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.07<-16338 Statuses=0008 0009 04:32:26 Msec=1500 True Az=112.995 Ze=-65.07 Az status=0008 Ze status=0009 04:32:27 Check angles 04:32:27 SkyScan query 04:32:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.04<-17736 Statuses=0008 0009 04:32:27 Msec=2250 True Az=112.995 Ze=-86.04 Az status=0008 Ze status=0009 04:32:27 Check angles 04:32:27 SkyScan query 04:32:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.965<-19131 Statuses=0008 0009 04:32:28 Msec=3000 True Az=112.995 Ze=-106.965 Az status=0008 Ze status=0009 04:32:28 Check angles 04:32:28 SkyScan query 04:32:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.935<-20529 Statuses=0008 0009 04:32:29 Msec=3750 True Az=112.995 Ze=-127.935 Az status=0008 Ze status=0009 04:32:29 Check angles 04:32:29 SkyScan query 04:32:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.89<-21926 Statuses=0008 0009 04:32:29 Msec=4500 True Az=112.995 Ze=-148.89 Az status=0008 Ze status=0009 04:32:30 Check angles 04:32:30 SkyScan query 04:32:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.83<-23322 Statuses=0008 0009 04:32:30 Msec=5250 True Az=112.995 Ze=-169.83 Az status=0008 Ze status=0009 04:32:30 Check angles 04:32:30 SkyScan query 04:32:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:32:31 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:32:31 Message to Master queued w/err=0: serial=94105 error=0 04:32:36 Received message from Master: op=Filter serial=94106 04:32:36 Color wheel filter change from 0 to 0 04:32:36 FLIGetFilterPos err=0 currentPosition=0 04:32:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:32:36 Filter is already there-color wheel unchanged 04:32:36 Received message from Master: op=Shutter serial=94107 04:32:36 Shutter LASER open 04:32:36 Received message from Camera: op=State serial=94109 04:32:36 GetSingleValue result=40 Value=cccccccc 04:32:36 SkyScan query 04:32:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:32:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:37 Parameters OK 04:32:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:37 Set A/D data flow result=40 04:32:37 Set A/D channel type result=40 04:32:37 Set A/D encoding result=40 04:32:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:37 Set channel filter=0.000000e+000 result=40 04:32:37 Config A/D Result=40 04:32:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:37 Get A/D filter: -9.255963e+061 result=40 04:32:37 Get A/D value=-858993460 result=40 04:32:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:37 Parameters OK 04:32:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:37 Set A/D data flow result=40 04:32:37 Set A/D channel type result=40 04:32:37 Set A/D encoding result=40 04:32:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:37 Set channel filter=0.000000e+000 result=40 04:32:37 Config A/D Result=40 04:32:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:37 Get A/D filter: -9.255963e+061 result=40 04:32:37 Get A/D value=-858993460 result=40 04:32:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:32:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:32:37 Aux= 04:32:37 Message to Camera, serial 94109 queued 04:32:45 Received message from Master: op=Shutter serial=94119 04:32:45 Shutter LASER close 04:32:46 Received message from Master: op=PointingHead serial=94123 04:32:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:32:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:32:46 Point started: ret=0 04:32:46 point_skyscan result=0 04:32:47 Check angles 04:32:47 SkyScan query 04:32:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.83<-21522 Statuses=0008 0009 04:32:48 Msec=0 True Az=112.995 Ze=-142.83 Az status=0008 Ze status=0009 04:32:48 Check angles 04:32:48 SkyScan query 04:32:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 04:32:48 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 04:32:49 Check angles 04:32:49 SkyScan query 04:32:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.935<-18729 Statuses=0008 0009 04:32:49 Msec=1500 True Az=112.995 Ze=-100.935 Az status=0008 Ze status=0009 04:32:49 Check angles 04:32:49 SkyScan query 04:32:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 04:32:50 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 04:32:50 Check angles 04:32:50 SkyScan query 04:32:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.04<-15936 Statuses=0008 0009 04:32:51 Msec=3000 True Az=112.995 Ze=-59.04 Az status=0008 Ze status=0009 04:32:51 Check angles 04:32:51 SkyScan query 04:32:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.04<-14536 Statuses=0008 0009 04:32:51 Msec=3750 True Az=112.995 Ze=-38.04 Az status=0008 Ze status=0009 04:32:52 Check angles 04:32:52 SkyScan query 04:32:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.115<-13141 Statuses=0008 0009 04:32:52 Msec=4500 True Az=112.995 Ze=-17.115 Az status=0008 Ze status=0009 04:32:52 Check angles 04:32:52 SkyScan query 04:32:53 SkyScan query done: ret=0 az=112.995<-7533 ze=3.855<-11743 Statuses=0008 0009 04:32:53 Msec=5250 True Az=112.995 Ze=3.855 Az status=0008 Ze status=0009 04:32:53 Check angles 04:32:53 SkyScan query 04:32:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:32:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:32:54 Message to Master queued w/err=0: serial=94123 error=0 04:32:59 Received message from Master: op=Filter serial=94124 04:32:59 Color wheel filter change from 0 to 0 04:32:59 FLIGetFilterPos err=0 currentPosition=0 04:32:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:32:59 Filter is already there-color wheel unchanged 04:32:59 Received message from Master: op=Shutter serial=94125 04:32:59 Shutter LASER close 04:32:59 Received message from Camera: op=State serial=94127 04:32:59 GetSingleValue result=40 Value=cccccccc 04:32:59 SkyScan query 04:33:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:33:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:00 Parameters OK 04:33:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:00 Set A/D data flow result=40 04:33:00 Set A/D channel type result=40 04:33:00 Set A/D encoding result=40 04:33:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:00 Set channel filter=0.000000e+000 result=40 04:33:00 Config A/D Result=40 04:33:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:00 Get A/D filter: -9.255963e+061 result=40 04:33:00 Get A/D value=-858993460 result=40 04:33:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:00 Parameters OK 04:33:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:00 Set A/D data flow result=40 04:33:00 Set A/D channel type result=40 04:33:00 Set A/D encoding result=40 04:33:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:00 Set channel filter=0.000000e+000 result=40 04:33:00 Config A/D Result=40 04:33:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:00 Get A/D filter: -9.255963e+061 result=40 04:33:00 Get A/D value=-858993460 result=40 04:33:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:00 Aux= 04:33:00 Message to Camera, serial 94127 queued 04:33:36 Received message from Master: op=PointingHead serial=94140 04:33:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:33:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:33:37 Point started: ret=0 04:33:37 point_skyscan result=0 04:33:37 Check angles 04:33:37 SkyScan query 04:33:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:33:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:33:38 Message to Master queued w/err=0: serial=94140 error=0 04:33:38 Received message from Master: op=Identify serial=94141 04:33:43 Received message from Master: op=Filter serial=94144 04:33:43 Color wheel filter change from 0 to 0 04:33:43 FLIGetFilterPos err=0 currentPosition=0 04:33:43 FLIGetStepsRemaining err=0 RemainingSteps=0 04:33:43 Filter is already there-color wheel unchanged 04:33:43 Received message from Master: op=Shutter serial=94145 04:33:43 Shutter LASER close 04:33:43 Received message from Camera: op=State serial=94147 04:33:43 GetSingleValue result=40 Value=cccccccc 04:33:43 SkyScan query 04:33:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:33:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:44 Parameters OK 04:33:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:44 Set A/D data flow result=40 04:33:44 Set A/D channel type result=40 04:33:44 Set A/D encoding result=40 04:33:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:44 Set channel filter=0.000000e+000 result=40 04:33:44 Config A/D Result=40 04:33:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:44 Get A/D filter: -9.255963e+061 result=40 04:33:44 Get A/D value=-858993460 result=40 04:33:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:44 Parameters OK 04:33:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:44 Set A/D data flow result=40 04:33:44 Set A/D channel type result=40 04:33:44 Set A/D encoding result=40 04:33:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:44 Set channel filter=0.000000e+000 result=40 04:33:44 Config A/D Result=40 04:33:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:44 Get A/D filter: -9.255963e+061 result=40 04:33:44 Get A/D value=-858993460 result=40 04:33:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:44 Aux= 04:33:44 Message to Camera, serial 94147 queued 04:34:21 Received message from Master: op=PointingHead serial=94160 04:34:21 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:34:21 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:34:21 Point started: ret=0 04:34:21 point_skyscan result=0 04:34:22 Check angles 04:34:22 SkyScan query 04:34:22 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 04:34:22 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 04:34:23 Check angles 04:34:23 SkyScan query [UTC 2019-3-4 04:34:23] 04:34:23 SkyScan query done: ret=0 az=153.555<-10237 ze=-6.495<-12433 Statuses=0009 0008 04:34:23 Msec=750 True Az=153.555 Ze=-6.495 Az status=0009 Ze status=0008 04:34:23 Check angles 04:34:23 SkyScan query 04:34:24 SkyScan query done: ret=0 az=171.165<-11411 ze=-6.495<-12433 Statuses=0009 0008 04:34:24 Msec=1500 True Az=171.165 Ze=-6.495 Az status=0009 Ze status=0008 04:34:24 Check angles 04:34:24 SkyScan query 04:34:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:34:25 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:34:25 Message to Master queued w/err=0: serial=94160 error=0 04:34:30 Received message from Master: op=Filter serial=94161 04:34:30 Color wheel filter change from 0 to 0 04:34:30 FLIGetFilterPos err=0 currentPosition=0 04:34:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:34:30 Filter is already there-color wheel unchanged 04:34:30 Received message from Master: op=Shutter serial=94162 04:34:30 Shutter LASER close 04:34:30 Received message from Camera: op=State serial=94164 04:34:30 GetSingleValue result=40 Value=cccccccc 04:34:30 SkyScan query 04:34:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:34:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:30 Parameters OK 04:34:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:30 Set A/D data flow result=40 04:34:30 Set A/D channel type result=40 04:34:30 Set A/D encoding result=40 04:34:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:30 Set channel filter=0.000000e+000 result=40 04:34:30 Config A/D Result=40 04:34:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:30 Get A/D filter: -9.255963e+061 result=40 04:34:30 Get A/D value=-858993460 result=40 04:34:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:30 Parameters OK 04:34:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:30 Set A/D data flow result=40 04:34:30 Set A/D channel type result=40 04:34:30 Set A/D encoding result=40 04:34:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:30 Set channel filter=0.000000e+000 result=40 04:34:30 Config A/D Result=40 04:34:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:30 Get A/D filter: -9.255963e+061 result=40 04:34:30 Get A/D value=-858993460 result=40 04:34:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:34:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:34:30 Aux= 04:34:30 Message to Camera, serial 94164 queued 04:35:07 Received message from Master: op=PointingHead serial=94177 04:35:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:35:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:35:08 Point started: ret=0 04:35:08 point_skyscan result=0 04:35:08 Check angles 04:35:08 SkyScan query 04:35:09 SkyScan query done: ret=0 az=153.255<-10217 ze=6.51<-11566 Statuses=0009 0008 04:35:09 Msec=0 True Az=153.255 Ze=6.51 Az status=0009 Ze status=0008 04:35:09 Check angles 04:35:09 SkyScan query 04:35:10 SkyScan query done: ret=0 az=135.795<-9053 ze=6.495<-11567 Statuses=0009 0008 04:35:10 Msec=750 True Az=135.795 Ze=6.495 Az status=0009 Ze status=0008 04:35:10 Check angles 04:35:10 SkyScan query 04:35:10 SkyScan query done: ret=0 az=117.93<-7862 ze=6.495<-11567 Statuses=0009 0008 04:35:10 Msec=1500 True Az=117.93 Ze=6.495 Az status=0009 Ze status=0008 04:35:11 Check angles 04:35:11 SkyScan query 04:35:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:35:11 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:35:11 Message to Master queued w/err=0: serial=94177 error=0 04:35:16 Received message from Master: op=Filter serial=94178 04:35:16 Color wheel filter change from 0 to 0 04:35:16 FLIGetFilterPos err=0 currentPosition=0 04:35:16 FLIGetStepsRemaining err=0 RemainingSteps=0 04:35:16 Filter is already there-color wheel unchanged 04:35:16 Received message from Master: op=Shutter serial=94179 04:35:16 Shutter LASER close 04:35:16 Received message from Camera: op=State serial=94181 04:35:16 GetSingleValue result=40 Value=cccccccc 04:35:16 SkyScan query 04:35:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:35:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:17 Parameters OK 04:35:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:17 Set A/D data flow result=40 04:35:17 Set A/D channel type result=40 04:35:17 Set A/D encoding result=40 04:35:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:17 Set channel filter=0.000000e+000 result=40 04:35:17 Config A/D Result=40 04:35:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:17 Get A/D filter: -9.255963e+061 result=40 04:35:17 Get A/D value=-858993460 result=40 04:35:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:17 Parameters OK 04:35:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:17 Set A/D data flow result=40 04:35:17 Set A/D channel type result=40 04:35:17 Set A/D encoding result=40 04:35:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:17 Set channel filter=0.000000e+000 result=40 04:35:17 Config A/D Result=40 04:35:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:17 Get A/D filter: -9.255963e+061 result=40 04:35:17 Get A/D value=-858993460 result=40 04:35:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:35:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:35:17 Aux= 04:35:17 Message to Camera, serial 94181 queued 04:35:54 Received message from Master: op=PointingHead serial=94194 04:35:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:35:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:35:54 Point started: ret=0 04:35:54 point_skyscan result=0 04:35:55 Check angles 04:35:55 SkyScan query 04:35:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.73<-13582 Statuses=0008 0009 04:35:55 Msec=0 True Az=112.995 Ze=-23.73 Az status=0008 Ze status=0009 04:35:56 Check angles 04:35:56 SkyScan query 04:35:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.09<-15006 Statuses=0008 0009 04:35:56 Msec=750 True Az=112.995 Ze=-45.09 Az status=0008 Ze status=0009 04:35:56 Check angles 04:35:56 SkyScan query 04:35:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.06<-16404 Statuses=0008 0009 04:35:57 Msec=1500 True Az=112.995 Ze=-66.06 Az status=0008 Ze status=0009 04:35:57 Check angles 04:35:57 SkyScan query 04:35:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.45<-17830 Statuses=0008 0009 04:35:58 Msec=2250 True Az=112.995 Ze=-87.45 Az status=0008 Ze status=0009 04:35:58 Check angles 04:35:58 SkyScan query 04:35:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.825<-19255 Statuses=0008 0009 04:35:59 Msec=3000 True Az=112.995 Ze=-108.825 Az status=0008 Ze status=0009 04:35:59 Check angles 04:35:59 SkyScan query 04:35:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-130.245<-20683 Statuses=0008 0009 04:35:59 Msec=3750 True Az=112.995 Ze=-130.245 Az status=0008 Ze status=0009 04:35:59 Check angles 04:35:59 SkyScan query 04:36:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.155<-22077 Statuses=0008 0009 04:36:00 Msec=4500 True Az=112.995 Ze=-151.155 Az status=0008 Ze status=0009 04:36:00 Check angles 04:36:00 SkyScan query 04:36:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.735<-23449 Statuses=0008 0009 04:36:01 Msec=5250 True Az=112.995 Ze=-171.735 Az status=0008 Ze status=0009 04:36:01 Check angles 04:36:01 SkyScan query 04:36:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:36:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:36:02 Message to Master queued w/err=0: serial=94194 error=0 04:36:07 Received message from Master: op=Filter serial=94195 04:36:07 Color wheel filter change from 0 to 0 04:36:07 FLIGetFilterPos err=0 currentPosition=0 04:36:07 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:07 Filter is already there-color wheel unchanged 04:36:07 Received message from Master: op=Shutter serial=94196 04:36:07 Shutter LASER open 04:36:07 Received message from Camera: op=State serial=94198 04:36:07 GetSingleValue result=40 Value=cccccccc 04:36:07 SkyScan query 04:36:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:36:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:07 Parameters OK 04:36:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:07 Set A/D data flow result=40 04:36:07 Set A/D channel type result=40 04:36:07 Set A/D encoding result=40 04:36:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:07 Set channel filter=0.000000e+000 result=40 04:36:07 Config A/D Result=40 04:36:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:07 Get A/D filter: -9.255963e+061 result=40 04:36:07 Get A/D value=-858993460 result=40 04:36:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:07 Parameters OK 04:36:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:07 Set A/D data flow result=40 04:36:07 Set A/D channel type result=40 04:36:07 Set A/D encoding result=40 04:36:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:07 Set channel filter=0.000000e+000 result=40 04:36:07 Config A/D Result=40 04:36:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:07 Get A/D filter: -9.255963e+061 result=40 04:36:07 Get A/D value=-858993460 result=40 04:36:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:07 Aux= 04:36:07 Message to Camera, serial 94198 queued 04:36:16 Received message from Master: op=Shutter serial=94208 04:36:16 Shutter LASER close 04:36:16 Received message from Master: op=PointingHead serial=94212 04:36:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:36:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:36:17 Point started: ret=0 04:36:17 point_skyscan result=0 04:36:17 Check angles 04:36:17 SkyScan query 04:36:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.665<-21511 Statuses=0008 0009 04:36:18 Msec=0 True Az=112.995 Ze=-142.665 Az status=0008 Ze status=0009 04:36:18 Check angles 04:36:18 SkyScan query 04:36:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.695<-20113 Statuses=0008 0009 04:36:19 Msec=750 True Az=112.995 Ze=-121.695 Az status=0008 Ze status=0009 04:36:19 Check angles 04:36:19 SkyScan query 04:36:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.335<-18689 Statuses=0008 0009 04:36:20 Msec=1500 True Az=112.995 Ze=-100.335 Az status=0008 Ze status=0009 04:36:20 Check angles 04:36:20 SkyScan query 04:36:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.38<-17292 Statuses=0008 0009 04:36:20 Msec=2250 True Az=112.995 Ze=-79.38 Az status=0008 Ze status=0009 04:36:20 Check angles 04:36:20 SkyScan query 04:36:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.395<-15893 Statuses=0008 0009 04:36:21 Msec=3000 True Az=112.995 Ze=-58.395 Az status=0008 Ze status=0009 04:36:21 Check angles 04:36:21 SkyScan query 04:36:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.455<-14497 Statuses=0008 0009 04:36:22 Msec=3750 True Az=112.995 Ze=-37.455 Az status=0008 Ze status=0009 04:36:22 Check angles 04:36:22 SkyScan query 04:36:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.53<-13102 Statuses=0008 0009 04:36:23 Msec=4500 True Az=112.995 Ze=-16.53 Az status=0008 Ze status=0009 04:36:23 Check angles 04:36:23 SkyScan query 04:36:23 SkyScan query done: ret=0 az=112.995<-7533 ze=4.38<-11708 Statuses=0008 0009 04:36:23 Msec=5250 True Az=112.995 Ze=4.38 Az status=0008 Ze status=0009 04:36:23 Check angles 04:36:23 SkyScan query 04:36:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:36:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:36:24 Message to Master queued w/err=0: serial=94212 error=0 04:36:29 Received message from Master: op=Filter serial=94213 04:36:29 Color wheel filter change from 0 to 0 04:36:29 FLIGetFilterPos err=0 currentPosition=0 04:36:29 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:29 Filter is already there-color wheel unchanged 04:36:29 Received message from Master: op=Shutter serial=94214 04:36:29 Shutter LASER close 04:36:29 Received message from Camera: op=State serial=94216 04:36:29 GetSingleValue result=40 Value=cccccccc 04:36:29 SkyScan query 04:36:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:36:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:30 Parameters OK 04:36:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:30 Set A/D data flow result=40 04:36:30 Set A/D channel type result=40 04:36:30 Set A/D encoding result=40 04:36:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:30 Set channel filter=0.000000e+000 result=40 04:36:30 Config A/D Result=40 04:36:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:30 Get A/D filter: -9.255963e+061 result=40 04:36:30 Get A/D value=-858993460 result=40 04:36:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:30 Parameters OK 04:36:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:30 Set A/D data flow result=40 04:36:30 Set A/D channel type result=40 04:36:30 Set A/D encoding result=40 04:36:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:30 Set channel filter=0.000000e+000 result=40 04:36:30 Config A/D Result=40 04:36:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:30 Get A/D filter: -9.255963e+061 result=40 04:36:30 Get A/D value=-858993460 result=40 04:36:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:30 Aux= 04:36:30 Message to Camera, serial 94216 queued 04:37:07 Received message from Master: op=PointingHead serial=94229 04:37:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:37:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:37:07 Point started: ret=0 04:37:07 point_skyscan result=0 04:37:08 Check angles 04:37:08 SkyScan query 04:37:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:37:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:37:08 Message to Master queued w/err=0: serial=94229 error=0 04:37:13 Received message from Master: op=Filter serial=94230 04:37:13 Color wheel filter change from 0 to 0 04:37:13 FLIGetFilterPos err=0 currentPosition=0 04:37:13 FLIGetStepsRemaining err=0 RemainingSteps=0 04:37:13 Filter is already there-color wheel unchanged 04:37:14 Received message from Master: op=Shutter serial=94231 04:37:14 Shutter LASER close 04:37:14 Received message from Camera: op=State serial=94233 04:37:14 GetSingleValue result=40 Value=cccccccc 04:37:14 SkyScan query 04:37:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:37:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:14 Parameters OK 04:37:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:14 Set A/D data flow result=40 04:37:14 Set A/D channel type result=40 04:37:14 Set A/D encoding result=40 04:37:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:14 Set channel filter=0.000000e+000 result=40 04:37:14 Config A/D Result=40 04:37:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:14 Get A/D filter: -9.255963e+061 result=40 04:37:14 Get A/D value=-858993460 result=40 04:37:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:14 Parameters OK 04:37:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:14 Set A/D data flow result=40 04:37:14 Set A/D channel type result=40 04:37:14 Set A/D encoding result=40 04:37:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:14 Set channel filter=0.000000e+000 result=40 04:37:14 Config A/D Result=40 04:37:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:14 Get A/D filter: -9.255963e+061 result=40 04:37:14 Get A/D value=-858993460 result=40 04:37:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:37:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:37:14 Aux= 04:37:14 Message to Camera, serial 94233 queued 04:37:50 Received message from Master: op=PointingHead serial=94245 04:37:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:37:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:37:51 Point started: ret=0 04:37:51 point_skyscan result=0 04:37:51 Check angles 04:37:51 SkyScan query 04:37:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:37:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:37:52 Message to Master queued w/err=0: serial=94245 error=0 04:37:57 Received message from Master: op=Filter serial=94246 04:37:57 Color wheel filter change from 0 to 0 04:37:57 FLIGetFilterPos err=0 currentPosition=0 04:37:57 FLIGetStepsRemaining err=0 RemainingSteps=0 04:37:57 Filter is already there-color wheel unchanged 04:37:57 Received message from Master: op=Shutter serial=94247 04:37:57 Shutter LASER close 04:37:57 Received message from Camera: op=State serial=94249 04:37:57 GetSingleValue result=40 Value=cccccccc 04:37:57 SkyScan query 04:37:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:37:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:58 Parameters OK 04:37:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:58 Set A/D data flow result=40 04:37:58 Set A/D channel type result=40 04:37:58 Set A/D encoding result=40 04:37:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:58 Set channel filter=0.000000e+000 result=40 04:37:58 Config A/D Result=40 04:37:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:58 Get A/D filter: -9.255963e+061 result=40 04:37:58 Get A/D value=-858993460 result=40 04:37:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:58 Parameters OK 04:37:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:58 Set A/D data flow result=40 04:37:58 Set A/D channel type result=40 04:37:58 Set A/D encoding result=40 04:37:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:58 Set channel filter=0.000000e+000 result=40 04:37:58 Config A/D Result=40 04:37:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:58 Get A/D filter: -9.255963e+061 result=40 04:37:58 Get A/D value=-858993460 result=40 04:37:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:37:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:37:58 Aux= 04:37:58 Message to Camera, serial 94249 queued 04:38:34 Received message from Master: op=PointingHead serial=94262 04:38:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:38:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:38:35 Point started: ret=0 04:38:35 point_skyscan result=0 04:38:36 Check angles 04:38:36 SkyScan query 04:38:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:38:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:38:36 Message to Master queued w/err=0: serial=94262 error=0 04:38:41 Received message from Master: op=Filter serial=94263 04:38:41 Color wheel filter change from 0 to 0 04:38:41 FLIGetFilterPos err=0 currentPosition=0 04:38:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:38:41 Filter is already there-color wheel unchanged 04:38:41 Received message from Master: op=Shutter serial=94264 04:38:41 Shutter LASER close 04:38:41 Received message from Camera: op=State serial=94266 04:38:41 GetSingleValue result=40 Value=cccccccc 04:38:41 SkyScan query 04:38:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:38:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:42 Parameters OK 04:38:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:42 Set A/D data flow result=40 04:38:42 Set A/D channel type result=40 04:38:42 Set A/D encoding result=40 04:38:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:42 Set channel filter=0.000000e+000 result=40 04:38:42 Config A/D Result=40 04:38:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:42 Get A/D filter: -9.255963e+061 result=40 04:38:42 Get A/D value=-858993460 result=40 04:38:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:42 Parameters OK 04:38:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:42 Set A/D data flow result=40 04:38:42 Set A/D channel type result=40 04:38:42 Set A/D encoding result=40 04:38:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:42 Set channel filter=0.000000e+000 result=40 04:38:42 Config A/D Result=40 04:38:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:42 Get A/D filter: -9.255963e+061 result=40 04:38:42 Get A/D value=-858993460 result=40 04:38:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:42 Aux= 04:38:42 Message to Camera, serial 94266 queued 04:39:19 Received message from Master: op=PointingHead serial=94279 04:39:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:39:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:39:19 Point started: ret=0 04:39:19 point_skyscan result=0 04:39:20 Check angles 04:39:20 SkyScan query 04:39:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.535<-13569 Statuses=0008 0009 04:39:21 Msec=0 True Az=112.995 Ze=-23.535 Az status=0008 Ze status=0009 04:39:21 Check angles 04:39:21 SkyScan query 04:39:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 04:39:21 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 04:39:21 Check angles 04:39:21 SkyScan query 04:39:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.865<-16391 Statuses=0008 0009 04:39:22 Msec=1500 True Az=112.995 Ze=-65.865 Az status=0008 Ze status=0009 04:39:22 Check angles 04:39:22 SkyScan query 04:39:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.805<-17787 Statuses=0008 0009 04:39:23 Msec=2250 True Az=112.995 Ze=-86.805 Az status=0008 Ze status=0009 04:39:23 Check angles 04:39:23 SkyScan query 04:39:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 04:39:24 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 04:39:24 Check angles 04:39:24 SkyScan query 04:39:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.15<-20610 Statuses=0008 0009 04:39:24 Msec=3750 True Az=112.995 Ze=-129.15 Az status=0008 Ze status=0009 04:39:24 Check angles 04:39:24 SkyScan query 04:39:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.135<-22009 Statuses=0008 0009 04:39:25 Msec=4500 True Az=112.995 Ze=-150.135 Az status=0008 Ze status=0009 04:39:25 Check angles 04:39:25 SkyScan query 04:39:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.955<-23397 Statuses=0008 0009 04:39:26 Msec=5250 True Az=112.995 Ze=-170.955 Az status=0008 Ze status=0009 04:39:26 Check angles 04:39:26 SkyScan query 04:39:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:39:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:39:27 Message to Master queued w/err=0: serial=94279 error=0 04:39:32 Received message from Master: op=Filter serial=94280 04:39:32 Color wheel filter change from 0 to 0 04:39:32 FLIGetFilterPos err=0 currentPosition=0 04:39:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:39:32 Filter is already there-color wheel unchanged 04:39:32 Received message from Master: op=Shutter serial=94281 04:39:32 Shutter LASER open 04:39:32 Received message from Camera: op=State serial=94283 04:39:32 GetSingleValue result=40 Value=cccccccc 04:39:32 SkyScan query 04:39:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:39:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:32 Parameters OK 04:39:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:32 Set A/D data flow result=40 04:39:32 Set A/D channel type result=40 04:39:32 Set A/D encoding result=40 04:39:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:32 Set channel filter=0.000000e+000 result=40 04:39:32 Config A/D Result=40 04:39:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:32 Get A/D filter: -9.255963e+061 result=40 04:39:32 Get A/D value=-858993460 result=40 04:39:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:32 Parameters OK 04:39:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:32 Set A/D data flow result=40 04:39:32 Set A/D channel type result=40 04:39:32 Set A/D encoding result=40 04:39:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:32 Set channel filter=0.000000e+000 result=40 04:39:32 Config A/D Result=40 04:39:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:32 Get A/D filter: -9.255963e+061 result=40 04:39:32 Get A/D value=-858993460 result=40 04:39:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:39:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:39:32 Aux= 04:39:32 Message to Camera, serial 94283 queued 04:39:41 Received message from Master: op=Shutter serial=94293 04:39:41 Shutter LASER close 04:39:41 Received message from Master: op=PointingHead serial=94297 04:39:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:39:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:39:42 Point started: ret=0 04:39:42 point_skyscan result=0 04:39:43 Check angles 04:39:43 SkyScan query 04:39:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 04:39:43 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 04:39:43 Check angles 04:39:43 SkyScan query 04:39:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.505<-20167 Statuses=0008 0009 04:39:44 Msec=750 True Az=112.995 Ze=-122.505 Az status=0008 Ze status=0009 04:39:44 Check angles 04:39:44 SkyScan query 04:39:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.505<-18767 Statuses=0008 0009 04:39:45 Msec=1500 True Az=112.995 Ze=-101.505 Az status=0008 Ze status=0009 04:39:45 Check angles 04:39:45 SkyScan query 04:39:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.535<-17369 Statuses=0008 0009 04:39:45 Msec=2250 True Az=112.995 Ze=-80.535 Az status=0008 Ze status=0009 04:39:46 Check angles 04:39:46 SkyScan query 04:39:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.175<-15945 Statuses=0008 0009 04:39:46 Msec=3000 True Az=112.995 Ze=-59.175 Az status=0008 Ze status=0009 04:39:46 Check angles 04:39:46 SkyScan query 04:39:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.19<-14546 Statuses=0008 0009 04:39:47 Msec=3750 True Az=112.995 Ze=-38.19 Az status=0008 Ze status=0009 04:39:47 Check angles 04:39:47 SkyScan query 04:39:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.265<-13151 Statuses=0008 0009 04:39:48 Msec=4500 True Az=112.995 Ze=-17.265 Az status=0008 Ze status=0009 04:39:48 Check angles 04:39:48 SkyScan query 04:39:48 SkyScan query done: ret=0 az=112.995<-7533 ze=4.125<-11725 Statuses=0008 0009 04:39:48 Msec=5250 True Az=112.995 Ze=4.125 Az status=0008 Ze status=0009 04:39:49 Check angles 04:39:49 SkyScan query 04:39:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:39:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:39:49 Message to Master queued w/err=0: serial=94297 error=0 04:39:54 Received message from Master: op=Filter serial=94298 04:39:54 Color wheel filter change from 0 to 0 04:39:54 FLIGetFilterPos err=0 currentPosition=0 04:39:54 FLIGetStepsRemaining err=0 RemainingSteps=0 04:39:54 Filter is already there-color wheel unchanged 04:39:54 Received message from Master: op=Shutter serial=94299 04:39:54 Shutter LASER close 04:39:55 Received message from Camera: op=State serial=94301 04:39:55 GetSingleValue result=40 Value=cccccccc 04:39:55 SkyScan query 04:39:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:39:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:55 Parameters OK 04:39:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:55 Set A/D data flow result=40 04:39:55 Set A/D channel type result=40 04:39:55 Set A/D encoding result=40 04:39:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:55 Set channel filter=0.000000e+000 result=40 04:39:55 Config A/D Result=40 04:39:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:55 Get A/D filter: -9.255963e+061 result=40 04:39:55 Get A/D value=-858993460 result=40 04:39:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:55 Parameters OK 04:39:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:55 Set A/D data flow result=40 04:39:55 Set A/D channel type result=40 04:39:55 Set A/D encoding result=40 04:39:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:55 Set channel filter=0.000000e+000 result=40 04:39:55 Config A/D Result=40 04:39:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:55 Get A/D filter: -9.255963e+061 result=40 04:39:55 Get A/D value=-858993460 result=40 04:39:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:39:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:39:55 Aux= 04:39:55 Message to Camera, serial 94301 queued 04:40:32 Received message from Master: op=PointingHead serial=94314 04:40:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:40:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:40:32 Point started: ret=0 04:40:32 point_skyscan result=0 04:40:33 Check angles 04:40:33 SkyScan query 04:40:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:40:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:40:34 Message to Master queued w/err=0: serial=94314 error=0 04:40:39 Received message from Master: op=Filter serial=94315 04:40:39 Color wheel filter change from 0 to 0 04:40:39 FLIGetFilterPos err=0 currentPosition=0 04:40:39 FLIGetStepsRemaining err=0 RemainingSteps=0 04:40:39 Filter is already there-color wheel unchanged 04:40:39 Received message from Master: op=Shutter serial=94316 04:40:39 Shutter LASER close 04:40:39 Received message from Camera: op=State serial=94318 04:40:39 GetSingleValue result=40 Value=cccccccc 04:40:39 SkyScan query 04:40:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:40:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:39 Parameters OK 04:40:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:39 Set A/D data flow result=40 04:40:39 Set A/D channel type result=40 04:40:39 Set A/D encoding result=40 04:40:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:39 Set channel filter=0.000000e+000 result=40 04:40:39 Config A/D Result=40 04:40:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:39 Get A/D filter: -9.255963e+061 result=40 04:40:39 Get A/D value=-858993460 result=40 04:40:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:39 Parameters OK 04:40:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:39 Set A/D data flow result=40 04:40:39 Set A/D channel type result=40 04:40:39 Set A/D encoding result=40 04:40:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:39 Set channel filter=0.000000e+000 result=40 04:40:39 Config A/D Result=40 04:40:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:39 Get A/D filter: -9.255963e+061 result=40 04:40:39 Get A/D value=-858993460 result=40 04:40:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:40:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:40:39 Aux= 04:40:39 Message to Camera, serial 94318 queued 04:41:16 Received message from Master: op=PointingHead serial=94331 04:41:16 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:41:16 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:41:17 Point started: ret=0 04:41:17 point_skyscan result=0 04:41:17 Check angles 04:41:17 SkyScan query 04:41:18 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 04:41:18 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 04:41:18 Check angles 04:41:18 SkyScan query 04:41:19 SkyScan query done: ret=0 az=153.675<-10245 ze=-6.495<-12433 Statuses=0009 0008 04:41:19 Msec=750 True Az=153.675 Ze=-6.495 Az status=0009 Ze status=0008 04:41:19 Check angles 04:41:19 SkyScan query 04:41:19 SkyScan query done: ret=0 az=171.195<-11413 ze=-6.495<-12433 Statuses=0009 0008 04:41:19 Msec=1500 True Az=171.195 Ze=-6.495 Az status=0009 Ze status=0008 04:41:20 Check angles 04:41:20 SkyScan query 04:41:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:41:20 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:41:20 Message to Master queued w/err=0: serial=94331 error=0 04:41:25 Received message from Master: op=Filter serial=94332 04:41:25 Color wheel filter change from 0 to 0 04:41:25 FLIGetFilterPos err=0 currentPosition=0 04:41:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:41:25 Filter is already there-color wheel unchanged 04:41:25 Received message from Master: op=Shutter serial=94333 04:41:25 Shutter LASER close 04:41:25 Received message from Camera: op=State serial=94335 04:41:25 GetSingleValue result=40 Value=cccccccc 04:41:25 SkyScan query 04:41:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:41:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:26 Parameters OK 04:41:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:26 Set A/D data flow result=40 04:41:26 Set A/D channel type result=40 04:41:26 Set A/D encoding result=40 04:41:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:26 Set channel filter=0.000000e+000 result=40 04:41:26 Config A/D Result=40 04:41:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:26 Get A/D filter: -9.255963e+061 result=40 04:41:26 Get A/D value=-858993460 result=40 04:41:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:26 Parameters OK 04:41:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:26 Set A/D data flow result=40 04:41:26 Set A/D channel type result=40 04:41:26 Set A/D encoding result=40 04:41:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:26 Set channel filter=0.000000e+000 result=40 04:41:26 Config A/D Result=40 04:41:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:26 Get A/D filter: -9.255963e+061 result=40 04:41:26 Get A/D value=-858993460 result=40 04:41:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:41:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:41:26 Aux= 04:41:26 Message to Camera, serial 94335 queued 04:42:03 Received message from Master: op=PointingHead serial=94348 04:42:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:42:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:42:03 Point started: ret=0 04:42:03 point_skyscan result=0 04:42:04 Check angles 04:42:04 SkyScan query 04:42:04 SkyScan query done: ret=0 az=152.835<-10189 ze=6.51<-11566 Statuses=0009 0008 04:42:04 Msec=0 True Az=152.835 Ze=6.51 Az status=0009 Ze status=0008 04:42:05 Check angles 04:42:05 SkyScan query 04:42:05 SkyScan query done: ret=0 az=135.045<-9003 ze=6.495<-11567 Statuses=0009 0008 04:42:05 Msec=750 True Az=135.045 Ze=6.495 Az status=0009 Ze status=0008 04:42:05 Check angles 04:42:05 SkyScan query 04:42:06 SkyScan query done: ret=0 az=117.195<-7813 ze=6.495<-11567 Statuses=0009 0008 04:42:06 Msec=1500 True Az=117.195 Ze=6.495 Az status=0009 Ze status=0008 04:42:06 Check angles 04:42:06 SkyScan query 04:42:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:42:07 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:42:07 Message to Master queued w/err=0: serial=94348 error=0 04:42:12 Received message from Master: op=Filter serial=94349 04:42:12 Color wheel filter change from 0 to 0 04:42:12 FLIGetFilterPos err=0 currentPosition=0 04:42:12 FLIGetStepsRemaining err=0 RemainingSteps=0 04:42:12 Filter is already there-color wheel unchanged 04:42:12 Received message from Master: op=Shutter serial=94350 04:42:12 Shutter LASER close 04:42:12 Received message from Camera: op=State serial=94352 04:42:12 GetSingleValue result=40 Value=cccccccc 04:42:12 SkyScan query 04:42:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:42:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:13 Parameters OK 04:42:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:13 Set A/D data flow result=40 04:42:13 Set A/D channel type result=40 04:42:13 Set A/D encoding result=40 04:42:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:13 Set channel filter=0.000000e+000 result=40 04:42:13 Config A/D Result=40 04:42:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:13 Get A/D filter: -9.255963e+061 result=40 04:42:13 Get A/D value=-858993460 result=40 04:42:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:13 Parameters OK 04:42:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:13 Set A/D data flow result=40 04:42:13 Set A/D channel type result=40 04:42:13 Set A/D encoding result=40 04:42:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:13 Set channel filter=0.000000e+000 result=40 04:42:13 Config A/D Result=40 04:42:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:13 Get A/D filter: -9.255963e+061 result=40 04:42:13 Get A/D value=-858993460 result=40 04:42:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:42:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:42:13 Aux= 04:42:13 Message to Camera, serial 94352 queued 04:42:49 Received message from Master: op=PointingHead serial=94365 04:42:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:42:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:42:50 Point started: ret=0 04:42:50 point_skyscan result=0 04:42:51 Check angles 04:42:51 SkyScan query 04:42:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.025<-13535 Statuses=0008 0009 04:42:51 Msec=0 True Az=112.995 Ze=-23.025 Az status=0008 Ze status=0009 04:42:51 Check angles 04:42:51 SkyScan query 04:42:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 04:42:52 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 04:42:52 Check angles 04:42:52 SkyScan query 04:42:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.95<-16330 Statuses=0008 0009 04:42:53 Msec=1500 True Az=112.995 Ze=-64.95 Az status=0008 Ze status=0009 04:42:53 Check angles 04:42:53 SkyScan query 04:42:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.95<-17730 Statuses=0008 0009 04:42:53 Msec=2250 True Az=112.995 Ze=-85.95 Az status=0008 Ze status=0009 04:42:54 Check angles 04:42:54 SkyScan query 04:42:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.86<-19124 Statuses=0008 0009 04:42:54 Msec=3000 True Az=112.995 Ze=-106.86 Az status=0008 Ze status=0009 04:42:54 Check angles 04:42:54 SkyScan query 04:42:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.25<-20550 Statuses=0008 0009 04:42:55 Msec=3750 True Az=112.995 Ze=-128.25 Az status=0008 Ze status=0009 04:42:55 Check angles 04:42:55 SkyScan query 04:42:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.205<-21947 Statuses=0008 0009 04:42:56 Msec=4500 True Az=112.995 Ze=-149.205 Az status=0008 Ze status=0009 04:42:56 Check angles 04:42:56 SkyScan query 04:42:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.16<-23344 Statuses=0008 0009 04:42:56 Msec=5250 True Az=112.995 Ze=-170.16 Az status=0008 Ze status=0009 04:42:57 Check angles 04:42:57 SkyScan query 04:42:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:42:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:42:57 Message to Master queued w/err=0: serial=94365 error=0 04:43:02 Received message from Master: op=Filter serial=94366 04:43:02 Color wheel filter change from 0 to 0 04:43:02 FLIGetFilterPos err=0 currentPosition=0 04:43:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:43:02 Filter is already there-color wheel unchanged 04:43:02 Received message from Master: op=Shutter serial=94367 04:43:02 Shutter LASER open 04:43:03 Received message from Camera: op=State serial=94369 04:43:03 GetSingleValue result=40 Value=cccccccc 04:43:03 SkyScan query 04:43:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:43:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:03 Parameters OK 04:43:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:03 Set A/D data flow result=40 04:43:03 Set A/D channel type result=40 04:43:03 Set A/D encoding result=40 04:43:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:03 Set channel filter=0.000000e+000 result=40 04:43:03 Config A/D Result=40 04:43:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:03 Get A/D filter: -9.255963e+061 result=40 04:43:03 Get A/D value=-858993460 result=40 04:43:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:03 Parameters OK 04:43:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:03 Set A/D data flow result=40 04:43:03 Set A/D channel type result=40 04:43:03 Set A/D encoding result=40 04:43:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:03 Set channel filter=0.000000e+000 result=40 04:43:03 Config A/D Result=40 04:43:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:03 Get A/D filter: -9.255963e+061 result=40 04:43:03 Get A/D value=-858993460 result=40 04:43:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:43:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:43:03 Aux= 04:43:03 Message to Camera, serial 94369 queued 04:43:12 Received message from Master: op=Shutter serial=94379 04:43:12 Shutter LASER close 04:43:12 Received message from Master: op=PointingHead serial=94383 04:43:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:43:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:43:12 Point started: ret=0 04:43:12 point_skyscan result=0 04:43:13 Check angles 04:43:13 SkyScan query 04:43:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 04:43:14 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 04:43:14 Check angles 04:43:14 SkyScan query 04:43:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.01<-20134 Statuses=0008 0009 04:43:14 Msec=750 True Az=112.995 Ze=-122.01 Az status=0008 Ze status=0009 04:43:15 Check angles 04:43:15 SkyScan query 04:43:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.085<-18739 Statuses=0008 0009 04:43:15 Msec=1500 True Az=112.995 Ze=-101.085 Az status=0008 Ze status=0009 04:43:15 Check angles 04:43:15 SkyScan query 04:43:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 04:43:16 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 04:43:16 Check angles 04:43:16 SkyScan query 04:43:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.755<-15917 Statuses=0008 0009 04:43:17 Msec=3000 True Az=112.995 Ze=-58.755 Az status=0008 Ze status=0009 04:43:17 Check angles 04:43:17 SkyScan query 04:43:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.35<-14490 Statuses=0008 0009 04:43:17 Msec=3750 True Az=112.995 Ze=-37.35 Az status=0008 Ze status=0009 04:43:18 Check angles 04:43:18 SkyScan query 04:43:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.38<-13092 Statuses=0008 0009 04:43:18 Msec=4500 True Az=112.995 Ze=-16.38 Az status=0008 Ze status=0009 04:43:18 Check angles 04:43:18 SkyScan query 04:43:19 SkyScan query done: ret=0 az=112.995<-7533 ze=4.47<-11702 Statuses=0008 0009 04:43:19 Msec=5250 True Az=112.995 Ze=4.47 Az status=0008 Ze status=0009 04:43:19 Check angles 04:43:19 SkyScan query 04:43:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:43:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:43:20 Message to Master queued w/err=0: serial=94383 error=0 04:43:25 Received message from Master: op=Filter serial=94384 04:43:25 Color wheel filter change from 0 to 0 04:43:25 FLIGetFilterPos err=0 currentPosition=0 04:43:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:43:25 Filter is already there-color wheel unchanged 04:43:25 Received message from Master: op=Shutter serial=94385 04:43:25 Shutter LASER close 04:43:25 Received message from Camera: op=State serial=94387 04:43:25 GetSingleValue result=40 Value=cccccccc 04:43:25 SkyScan query 04:43:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:43:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:26 Parameters OK 04:43:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:26 Set A/D data flow result=40 04:43:26 Set A/D channel type result=40 04:43:26 Set A/D encoding result=40 04:43:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:26 Set channel filter=0.000000e+000 result=40 04:43:26 Config A/D Result=40 04:43:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:26 Get A/D filter: -9.255963e+061 result=40 04:43:26 Get A/D value=-858993460 result=40 04:43:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:26 Parameters OK 04:43:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:26 Set A/D data flow result=40 04:43:26 Set A/D channel type result=40 04:43:26 Set A/D encoding result=40 04:43:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:26 Set channel filter=0.000000e+000 result=40 04:43:26 Config A/D Result=40 04:43:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:26 Get A/D filter: -9.255963e+061 result=40 04:43:26 Get A/D value=-858993460 result=40 04:43:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:43:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:43:26 Aux= 04:43:26 Message to Camera, serial 94387 queued [UTC 2019-3-4 04:43:50] 04:44:02 Received message from Master: op=PointingHead serial=94400 04:44:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:44:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:44:03 Point started: ret=0 04:44:03 point_skyscan result=0 04:44:03 Check angles 04:44:03 SkyScan query 04:44:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:44:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:44:04 Message to Master queued w/err=0: serial=94400 error=0 04:44:09 Received message from Master: op=Filter serial=94401 04:44:09 Color wheel filter change from 0 to 0 04:44:09 FLIGetFilterPos err=0 currentPosition=0 04:44:09 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:09 Filter is already there-color wheel unchanged 04:44:09 Received message from Master: op=Shutter serial=94402 04:44:09 Shutter LASER close 04:44:09 Received message from Camera: op=State serial=94404 04:44:09 GetSingleValue result=40 Value=cccccccc 04:44:09 SkyScan query 04:44:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:44:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:10 Parameters OK 04:44:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:10 Set A/D data flow result=40 04:44:10 Set A/D channel type result=40 04:44:10 Set A/D encoding result=40 04:44:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:10 Set channel filter=0.000000e+000 result=40 04:44:10 Config A/D Result=40 04:44:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:10 Get A/D filter: -9.255963e+061 result=40 04:44:10 Get A/D value=-858993460 result=40 04:44:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:10 Parameters OK 04:44:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:10 Set A/D data flow result=40 04:44:10 Set A/D channel type result=40 04:44:10 Set A/D encoding result=40 04:44:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:10 Set channel filter=0.000000e+000 result=40 04:44:10 Config A/D Result=40 04:44:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:10 Get A/D filter: -9.255963e+061 result=40 04:44:10 Get A/D value=-858993460 result=40 04:44:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:10 Aux= 04:44:10 Message to Camera, serial 94404 queued 04:44:47 Received message from Master: op=PointingHead serial=94417 04:44:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:44:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:44:47 Point started: ret=0 04:44:47 point_skyscan result=0 04:44:48 Check angles 04:44:48 SkyScan query 04:44:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:44:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:44:48 Message to Master queued w/err=0: serial=94417 error=0 04:44:53 Received message from Master: op=Filter serial=94418 04:44:53 Color wheel filter change from 0 to 0 04:44:53 FLIGetFilterPos err=0 currentPosition=0 04:44:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:53 Filter is already there-color wheel unchanged 04:44:54 Received message from Master: op=Shutter serial=94419 04:44:54 Shutter LASER close 04:44:54 Received message from Camera: op=State serial=94421 04:44:54 GetSingleValue result=40 Value=cccccccc 04:44:54 SkyScan query 04:44:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:44:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:54 Parameters OK 04:44:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:54 Set A/D data flow result=40 04:44:54 Set A/D channel type result=40 04:44:54 Set A/D encoding result=40 04:44:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:54 Set channel filter=0.000000e+000 result=40 04:44:54 Config A/D Result=40 04:44:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:54 Get A/D filter: -9.255963e+061 result=40 04:44:54 Get A/D value=-858993460 result=40 04:44:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:54 Parameters OK 04:44:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:54 Set A/D data flow result=40 04:44:54 Set A/D channel type result=40 04:44:54 Set A/D encoding result=40 04:44:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:54 Set channel filter=0.000000e+000 result=40 04:44:54 Config A/D Result=40 04:44:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:54 Get A/D filter: -9.255963e+061 result=40 04:44:54 Get A/D value=-858993460 result=40 04:44:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:54 Aux= 04:44:54 Message to Camera, serial 94421 queued 04:45:31 Received message from Master: op=PointingHead serial=94434 04:45:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:45:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:45:31 Point started: ret=0 04:45:31 point_skyscan result=0 04:45:32 Check angles 04:45:32 SkyScan query 04:45:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:45:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:45:33 Message to Master queued w/err=0: serial=94434 error=0 04:45:38 Received message from Master: op=Filter serial=94435 04:45:38 Color wheel filter change from 0 to 0 04:45:38 FLIGetFilterPos err=0 currentPosition=0 04:45:38 FLIGetStepsRemaining err=0 RemainingSteps=0 04:45:38 Filter is already there-color wheel unchanged 04:45:38 Received message from Master: op=Shutter serial=94436 04:45:38 Shutter LASER close 04:45:38 Received message from Camera: op=State serial=94438 04:45:38 GetSingleValue result=40 Value=cccccccc 04:45:38 SkyScan query 04:45:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:45:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:38 Parameters OK 04:45:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:38 Set A/D data flow result=40 04:45:38 Set A/D channel type result=40 04:45:38 Set A/D encoding result=40 04:45:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:38 Set channel filter=0.000000e+000 result=40 04:45:38 Config A/D Result=40 04:45:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:38 Get A/D filter: -9.255963e+061 result=40 04:45:38 Get A/D value=-858993460 result=40 04:45:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:38 Parameters OK 04:45:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:38 Set A/D data flow result=40 04:45:38 Set A/D channel type result=40 04:45:38 Set A/D encoding result=40 04:45:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:38 Set channel filter=0.000000e+000 result=40 04:45:38 Config A/D Result=40 04:45:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:38 Get A/D filter: -9.255963e+061 result=40 04:45:38 Get A/D value=-858993460 result=40 04:45:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:45:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:45:38 Aux= 04:45:38 Message to Camera, serial 94438 queued 04:46:15 Received message from Master: op=PointingHead serial=94451 04:46:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:46:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:46:16 Point started: ret=0 04:46:16 point_skyscan result=0 04:46:16 Check angles 04:46:16 SkyScan query 04:46:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 04:46:17 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 04:46:17 Check angles 04:46:17 SkyScan query 04:46:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.175<-14945 Statuses=0008 0009 04:46:18 Msec=750 True Az=112.995 Ze=-44.175 Az status=0008 Ze status=0009 04:46:18 Check angles 04:46:18 SkyScan query 04:46:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.115<-16341 Statuses=0008 0009 04:46:18 Msec=1500 True Az=112.995 Ze=-65.115 Az status=0008 Ze status=0009 04:46:19 Check angles 04:46:19 SkyScan query 04:46:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.505<-17767 Statuses=0008 0009 04:46:19 Msec=2250 True Az=112.995 Ze=-86.505 Az status=0008 Ze status=0009 04:46:19 Check angles 04:46:19 SkyScan query 04:46:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.475<-19165 Statuses=0008 0009 04:46:20 Msec=3000 True Az=112.995 Ze=-107.475 Az status=0008 Ze status=0009 04:46:20 Check angles 04:46:20 SkyScan query 04:46:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.385<-20559 Statuses=0008 0009 04:46:21 Msec=3750 True Az=112.995 Ze=-128.385 Az status=0008 Ze status=0009 04:46:21 Check angles 04:46:21 SkyScan query 04:46:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.37<-21958 Statuses=0008 0009 04:46:21 Msec=4500 True Az=112.995 Ze=-149.37 Az status=0008 Ze status=0009 04:46:22 Check angles 04:46:22 SkyScan query 04:46:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.31<-23354 Statuses=0008 0009 04:46:22 Msec=5250 True Az=112.995 Ze=-170.31 Az status=0008 Ze status=0009 04:46:22 Check angles 04:46:22 SkyScan query 04:46:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:46:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:46:23 Message to Master queued w/err=0: serial=94451 error=0 04:46:28 Received message from Master: op=Filter serial=94452 04:46:28 Color wheel filter change from 0 to 0 04:46:28 FLIGetFilterPos err=0 currentPosition=0 04:46:28 FLIGetStepsRemaining err=0 RemainingSteps=0 04:46:28 Filter is already there-color wheel unchanged 04:46:28 Received message from Master: op=Shutter serial=94453 04:46:28 Shutter LASER open 04:46:28 Received message from Camera: op=State serial=94455 04:46:28 GetSingleValue result=40 Value=cccccccc 04:46:28 SkyScan query 04:46:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:46:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:29 Parameters OK 04:46:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:29 Set A/D data flow result=40 04:46:29 Set A/D channel type result=40 04:46:29 Set A/D encoding result=40 04:46:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:29 Set channel filter=0.000000e+000 result=40 04:46:29 Config A/D Result=40 04:46:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:29 Get A/D filter: -9.255963e+061 result=40 04:46:29 Get A/D value=-858993460 result=40 04:46:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:29 Parameters OK 04:46:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:29 Set A/D data flow result=40 04:46:29 Set A/D channel type result=40 04:46:29 Set A/D encoding result=40 04:46:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:29 Set channel filter=0.000000e+000 result=40 04:46:29 Config A/D Result=40 04:46:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:29 Get A/D filter: -9.255963e+061 result=40 04:46:29 Get A/D value=-858993460 result=40 04:46:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:46:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:46:29 Aux= 04:46:29 Message to Camera, serial 94455 queued 04:46:37 Received message from Master: op=Shutter serial=94465 04:46:37 Shutter LASER close 04:46:38 Received message from Master: op=PointingHead serial=94469 04:46:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:46:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:46:38 Point started: ret=0 04:46:38 point_skyscan result=0 04:46:39 Check angles 04:46:39 SkyScan query 04:46:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 04:46:40 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 04:46:40 Check angles 04:46:40 SkyScan query 04:46:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.875<-20125 Statuses=0008 0009 04:46:40 Msec=750 True Az=112.995 Ze=-121.875 Az status=0008 Ze status=0009 04:46:41 Check angles 04:46:41 SkyScan query 04:46:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.95<-18730 Statuses=0008 0009 04:46:41 Msec=1500 True Az=112.995 Ze=-100.95 Az status=0008 Ze status=0009 04:46:41 Check angles 04:46:41 SkyScan query 04:46:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.995<-17333 Statuses=0008 0009 04:46:42 Msec=2250 True Az=112.995 Ze=-79.995 Az status=0008 Ze status=0009 04:46:42 Check angles 04:46:42 SkyScan query 04:46:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.055<-15937 Statuses=0008 0009 04:46:43 Msec=3000 True Az=112.995 Ze=-59.055 Az status=0008 Ze status=0009 04:46:43 Check angles 04:46:43 SkyScan query 04:46:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.055<-14537 Statuses=0008 0009 04:46:43 Msec=3750 True Az=112.995 Ze=-38.055 Az status=0008 Ze status=0009 04:46:44 Check angles 04:46:44 SkyScan query 04:46:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.13<-13142 Statuses=0008 0009 04:46:44 Msec=4500 True Az=112.995 Ze=-17.13 Az status=0008 Ze status=0009 04:46:44 Check angles 04:46:44 SkyScan query 04:46:45 SkyScan query done: ret=0 az=112.995<-7533 ze=4.245<-11717 Statuses=0008 0009 04:46:45 Msec=5250 True Az=112.995 Ze=4.245 Az status=0008 Ze status=0009 04:46:45 Check angles 04:46:45 SkyScan query 04:46:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:46:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:46:46 Message to Master queued w/err=0: serial=94469 error=0 04:46:51 Received message from Master: op=Filter serial=94470 04:46:51 Color wheel filter change from 0 to 0 04:46:51 FLIGetFilterPos err=0 currentPosition=0 04:46:51 FLIGetStepsRemaining err=0 RemainingSteps=0 04:46:51 Filter is already there-color wheel unchanged 04:46:51 Received message from Master: op=Shutter serial=94471 04:46:51 Shutter LASER close 04:46:51 Received message from Camera: op=State serial=94473 04:46:51 GetSingleValue result=40 Value=cccccccc 04:46:51 SkyScan query 04:46:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:46:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:52 Parameters OK 04:46:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:52 Set A/D data flow result=40 04:46:52 Set A/D channel type result=40 04:46:52 Set A/D encoding result=40 04:46:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:52 Set channel filter=0.000000e+000 result=40 04:46:52 Config A/D Result=40 04:46:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:52 Get A/D filter: -9.255963e+061 result=40 04:46:52 Get A/D value=-858993460 result=40 04:46:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:52 Parameters OK 04:46:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:52 Set A/D data flow result=40 04:46:52 Set A/D channel type result=40 04:46:52 Set A/D encoding result=40 04:46:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:52 Set channel filter=0.000000e+000 result=40 04:46:52 Config A/D Result=40 04:46:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:52 Get A/D filter: -9.255963e+061 result=40 04:46:52 Get A/D value=-858993460 result=40 04:46:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:46:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:46:52 Aux= 04:46:52 Message to Camera, serial 94473 queued 04:47:28 Received message from Master: op=PointingHead serial=94486 04:47:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:47:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:47:29 Point started: ret=0 04:47:29 point_skyscan result=0 04:47:30 Check angles 04:47:30 SkyScan query 04:47:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:47:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:47:30 Message to Master queued w/err=0: serial=94486 error=0 04:47:35 Received message from Master: op=Filter serial=94487 04:47:35 Color wheel filter change from 0 to 0 04:47:35 FLIGetFilterPos err=0 currentPosition=0 04:47:35 FLIGetStepsRemaining err=0 RemainingSteps=0 04:47:35 Filter is already there-color wheel unchanged 04:47:35 Received message from Master: op=Shutter serial=94488 04:47:35 Shutter LASER close 04:47:35 Received message from Camera: op=State serial=94490 04:47:35 GetSingleValue result=40 Value=cccccccc 04:47:35 SkyScan query 04:47:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:47:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:36 Parameters OK 04:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:36 Set A/D data flow result=40 04:47:36 Set A/D channel type result=40 04:47:36 Set A/D encoding result=40 04:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:36 Set channel filter=0.000000e+000 result=40 04:47:36 Config A/D Result=40 04:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:36 Get A/D filter: -9.255963e+061 result=40 04:47:36 Get A/D value=-858993460 result=40 04:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:36 Parameters OK 04:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:36 Set A/D data flow result=40 04:47:36 Set A/D channel type result=40 04:47:36 Set A/D encoding result=40 04:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:36 Set channel filter=0.000000e+000 result=40 04:47:36 Config A/D Result=40 04:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:36 Get A/D filter: -9.255963e+061 result=40 04:47:36 Get A/D value=-858993460 result=40 04:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:47:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:47:36 Aux= 04:47:36 Message to Camera, serial 94490 queued 04:48:13 Received message from Master: op=PointingHead serial=94503 04:48:13 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:48:13 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:48:13 Point started: ret=0 04:48:13 point_skyscan result=0 04:48:14 Check angles 04:48:14 SkyScan query 04:48:14 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 04:48:14 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 04:48:15 Check angles 04:48:15 SkyScan query 04:48:15 SkyScan query done: ret=0 az=153.945<-10263 ze=-6.495<-12433 Statuses=0009 0008 04:48:15 Msec=750 True Az=153.945 Ze=-6.495 Az status=0009 Ze status=0008 04:48:15 Check angles 04:48:15 SkyScan query 04:48:16 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 04:48:16 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 04:48:16 Check angles 04:48:16 SkyScan query 04:48:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:48:17 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:48:17 Message to Master queued w/err=0: serial=94503 error=0 04:48:22 Received message from Master: op=Filter serial=94504 04:48:22 Color wheel filter change from 0 to 0 04:48:22 FLIGetFilterPos err=0 currentPosition=0 04:48:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:48:22 Filter is already there-color wheel unchanged 04:48:22 Received message from Master: op=Shutter serial=94505 04:48:22 Shutter LASER close 04:48:22 Received message from Camera: op=State serial=94507 04:48:22 GetSingleValue result=40 Value=cccccccc 04:48:22 SkyScan query 04:48:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:48:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:22 Parameters OK 04:48:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:22 Set A/D data flow result=40 04:48:22 Set A/D channel type result=40 04:48:22 Set A/D encoding result=40 04:48:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:22 Set channel filter=0.000000e+000 result=40 04:48:22 Config A/D Result=40 04:48:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:22 Get A/D filter: -9.255963e+061 result=40 04:48:22 Get A/D value=-858993460 result=40 04:48:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:22 Parameters OK 04:48:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:22 Set A/D data flow result=40 04:48:22 Set A/D channel type result=40 04:48:22 Set A/D encoding result=40 04:48:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:22 Set channel filter=0.000000e+000 result=40 04:48:22 Config A/D Result=40 04:48:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:22 Get A/D filter: -9.255963e+061 result=40 04:48:22 Get A/D value=-858993460 result=40 04:48:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:48:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:48:22 Aux= 04:48:22 Message to Camera, serial 94507 queued 04:48:59 Received message from Master: op=PointingHead serial=94520 04:48:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:48:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:49:00 Point started: ret=0 04:49:00 point_skyscan result=0 04:49:00 Check angles 04:49:00 SkyScan query 04:49:01 SkyScan query done: ret=0 az=153.33<-10222 ze=6.51<-11566 Statuses=0009 0008 04:49:01 Msec=0 True Az=153.33 Ze=6.51 Az status=0009 Ze status=0008 04:49:01 Check angles 04:49:01 SkyScan query 04:49:02 SkyScan query done: ret=0 az=135.375<-9025 ze=6.495<-11567 Statuses=0009 0008 04:49:02 Msec=750 True Az=135.375 Ze=6.495 Az status=0009 Ze status=0008 04:49:02 Check angles 04:49:02 SkyScan query 04:49:02 SkyScan query done: ret=0 az=117.93<-7862 ze=6.495<-11567 Statuses=0009 0008 04:49:02 Msec=1500 True Az=117.93 Ze=6.495 Az status=0009 Ze status=0008 04:49:03 Check angles 04:49:03 SkyScan query 04:49:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:49:03 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:49:03 Message to Master queued w/err=0: serial=94520 error=0 04:49:08 Received message from Master: op=Filter serial=94521 04:49:08 Color wheel filter change from 0 to 0 04:49:08 FLIGetFilterPos err=0 currentPosition=0 04:49:08 FLIGetStepsRemaining err=0 RemainingSteps=0 04:49:08 Filter is already there-color wheel unchanged 04:49:08 Received message from Master: op=Shutter serial=94522 04:49:08 Shutter LASER close 04:49:08 Received message from Camera: op=State serial=94524 04:49:08 GetSingleValue result=40 Value=cccccccc 04:49:08 SkyScan query 04:49:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:49:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:09 Parameters OK 04:49:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:09 Set A/D data flow result=40 04:49:09 Set A/D channel type result=40 04:49:09 Set A/D encoding result=40 04:49:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:09 Set channel filter=0.000000e+000 result=40 04:49:09 Config A/D Result=40 04:49:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:09 Get A/D filter: -9.255963e+061 result=40 04:49:09 Get A/D value=-858993460 result=40 04:49:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:09 Parameters OK 04:49:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:09 Set A/D data flow result=40 04:49:09 Set A/D channel type result=40 04:49:09 Set A/D encoding result=40 04:49:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:09 Set channel filter=0.000000e+000 result=40 04:49:09 Config A/D Result=40 04:49:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:09 Get A/D filter: -9.255963e+061 result=40 04:49:09 Get A/D value=-858993460 result=40 04:49:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:49:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:49:09 Aux= 04:49:09 Message to Camera, serial 94524 queued 04:49:46 Received message from Master: op=PointingHead serial=94537 04:49:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:49:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:49:46 Point started: ret=0 04:49:46 point_skyscan result=0 04:49:47 Check angles 04:49:47 SkyScan query 04:49:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.625<-13575 Statuses=0008 0009 04:49:47 Msec=0 True Az=112.995 Ze=-23.625 Az status=0008 Ze status=0009 04:49:48 Check angles 04:49:48 SkyScan query 04:49:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 04:49:48 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 04:49:48 Check angles 04:49:48 SkyScan query 04:49:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.535<-16369 Statuses=0008 0009 04:49:49 Msec=1500 True Az=112.995 Ze=-65.535 Az status=0008 Ze status=0009 04:49:49 Check angles 04:49:49 SkyScan query 04:49:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.895<-17793 Statuses=0008 0009 04:49:50 Msec=2250 True Az=112.995 Ze=-86.895 Az status=0008 Ze status=0009 04:49:50 Check angles 04:49:50 SkyScan query 04:49:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.285<-19219 Statuses=0008 0009 04:49:51 Msec=3000 True Az=112.995 Ze=-108.285 Az status=0008 Ze status=0009 04:49:51 Check angles 04:49:51 SkyScan query 04:49:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.255<-20617 Statuses=0008 0009 04:49:51 Msec=3750 True Az=112.995 Ze=-129.255 Az status=0008 Ze status=0009 04:49:51 Check angles 04:49:51 SkyScan query 04:49:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.21<-22014 Statuses=0008 0009 04:49:52 Msec=4500 True Az=112.995 Ze=-150.21 Az status=0008 Ze status=0009 04:49:52 Check angles 04:49:52 SkyScan query 04:49:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 04:49:53 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 04:49:53 Check angles 04:49:53 SkyScan query 04:49:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:49:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:49:54 Message to Master queued w/err=0: serial=94537 error=0 04:49:59 Received message from Master: op=Filter serial=94538 04:49:59 Color wheel filter change from 0 to 0 04:49:59 FLIGetFilterPos err=0 currentPosition=0 04:49:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:49:59 Filter is already there-color wheel unchanged 04:49:59 Received message from Master: op=Shutter serial=94539 04:49:59 Shutter LASER open 04:49:59 Received message from Camera: op=State serial=94541 04:49:59 GetSingleValue result=40 Value=cccccccc 04:49:59 SkyScan query 04:49:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:49:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:59 Parameters OK 04:49:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:59 Set A/D data flow result=40 04:49:59 Set A/D channel type result=40 04:49:59 Set A/D encoding result=40 04:49:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:59 Set channel filter=0.000000e+000 result=40 04:49:59 Config A/D Result=40 04:49:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:59 Get A/D filter: -9.255963e+061 result=40 04:49:59 Get A/D value=-858993460 result=40 04:49:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:59 Parameters OK 04:49:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:59 Set A/D data flow result=40 04:49:59 Set A/D channel type result=40 04:49:59 Set A/D encoding result=40 04:49:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:59 Set channel filter=0.000000e+000 result=40 04:49:59 Config A/D Result=40 04:49:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:59 Get A/D filter: -9.255963e+061 result=40 04:49:59 Get A/D value=-858993460 result=40 04:49:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:49:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:49:59 Aux= 04:49:59 Message to Camera, serial 94541 queued 04:50:08 Received message from Master: op=Shutter serial=94551 04:50:08 Shutter LASER close 04:50:08 Received message from Master: op=PointingHead serial=94555 04:50:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:50:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:50:09 Point started: ret=0 04:50:09 point_skyscan result=0 04:50:09 Check angles 04:50:09 SkyScan query 04:50:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.8<-21520 Statuses=0008 0009 04:50:10 Msec=0 True Az=112.995 Ze=-142.8 Az status=0008 Ze status=0009 04:50:10 Check angles 04:50:10 SkyScan query 04:50:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.425<-20095 Statuses=0008 0009 04:50:11 Msec=750 True Az=112.995 Ze=-121.425 Az status=0008 Ze status=0009 04:50:11 Check angles 04:50:11 SkyScan query 04:50:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.47<-18698 Statuses=0008 0009 04:50:12 Msec=1500 True Az=112.995 Ze=-100.47 Az status=0008 Ze status=0009 04:50:12 Check angles 04:50:12 SkyScan query 04:50:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.515<-17301 Statuses=0008 0009 04:50:12 Msec=2250 True Az=112.995 Ze=-79.515 Az status=0008 Ze status=0009 04:50:12 Check angles 04:50:12 SkyScan query 04:50:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.56<-15904 Statuses=0008 0009 04:50:13 Msec=3000 True Az=112.995 Ze=-58.56 Az status=0008 Ze status=0009 04:50:13 Check angles 04:50:13 SkyScan query 04:50:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.605<-14507 Statuses=0008 0009 04:50:14 Msec=3750 True Az=112.995 Ze=-37.605 Az status=0008 Ze status=0009 04:50:14 Check angles 04:50:14 SkyScan query 04:50:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.65<-13110 Statuses=0008 0009 04:50:15 Msec=4500 True Az=112.995 Ze=-16.65 Az status=0008 Ze status=0009 04:50:15 Check angles 04:50:15 SkyScan query 04:50:15 SkyScan query done: ret=0 az=112.995<-7533 ze=4.275<-11715 Statuses=0008 0009 04:50:15 Msec=5250 True Az=112.995 Ze=4.275 Az status=0008 Ze status=0009 04:50:15 Check angles 04:50:15 SkyScan query 04:50:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:50:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:50:16 Message to Master queued w/err=0: serial=94555 error=0 04:50:21 Received message from Master: op=Filter serial=94556 04:50:21 Color wheel filter change from 0 to 0 04:50:21 FLIGetFilterPos err=0 currentPosition=0 04:50:21 FLIGetStepsRemaining err=0 RemainingSteps=0 04:50:21 Filter is already there-color wheel unchanged 04:50:21 Received message from Master: op=Shutter serial=94557 04:50:21 Shutter LASER close 04:50:21 Received message from Camera: op=State serial=94559 04:50:21 GetSingleValue result=40 Value=cccccccc 04:50:21 SkyScan query 04:50:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:50:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:22 Parameters OK 04:50:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:22 Set A/D data flow result=40 04:50:22 Set A/D channel type result=40 04:50:22 Set A/D encoding result=40 04:50:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:22 Set channel filter=0.000000e+000 result=40 04:50:22 Config A/D Result=40 04:50:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:22 Get A/D filter: -9.255963e+061 result=40 04:50:22 Get A/D value=-858993460 result=40 04:50:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:22 Parameters OK 04:50:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:22 Set A/D data flow result=40 04:50:22 Set A/D channel type result=40 04:50:22 Set A/D encoding result=40 04:50:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:22 Set channel filter=0.000000e+000 result=40 04:50:22 Config A/D Result=40 04:50:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:22 Get A/D filter: -9.255963e+061 result=40 04:50:22 Get A/D value=-858993460 result=40 04:50:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:50:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:50:22 Aux= 04:50:22 Message to Camera, serial 94559 queued 04:50:59 Received message from Master: op=PointingHead serial=94572 04:50:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:50:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:50:59 Point started: ret=0 04:50:59 point_skyscan result=0 04:51:00 Check angles 04:51:00 SkyScan query 04:51:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:51:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:51:00 Message to Master queued w/err=0: serial=94572 error=0 04:51:05 Received message from Master: op=Filter serial=94573 04:51:05 Color wheel filter change from 0 to 0 04:51:05 FLIGetFilterPos err=0 currentPosition=0 04:51:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:05 Filter is already there-color wheel unchanged 04:51:06 Received message from Master: op=Shutter serial=94574 04:51:06 Shutter LASER close 04:51:06 Received message from Camera: op=State serial=94576 04:51:06 GetSingleValue result=40 Value=cccccccc 04:51:06 SkyScan query 04:51:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:51:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:06 Parameters OK 04:51:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:06 Set A/D data flow result=40 04:51:06 Set A/D channel type result=40 04:51:06 Set A/D encoding result=40 04:51:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:06 Set channel filter=0.000000e+000 result=40 04:51:06 Config A/D Result=40 04:51:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:06 Get A/D filter: -9.255963e+061 result=40 04:51:06 Get A/D value=-858993460 result=40 04:51:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:06 Parameters OK 04:51:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:06 Set A/D data flow result=40 04:51:06 Set A/D channel type result=40 04:51:06 Set A/D encoding result=40 04:51:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:06 Set channel filter=0.000000e+000 result=40 04:51:06 Config A/D Result=40 04:51:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:06 Get A/D filter: -9.255963e+061 result=40 04:51:06 Get A/D value=-858993460 result=40 04:51:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:06 Aux= 04:51:06 Message to Camera, serial 94576 queued 04:51:43 Received message from Master: op=PointingHead serial=94589 04:51:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:51:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:51:44 Point started: ret=0 04:51:44 point_skyscan result=0 04:51:44 Check angles 04:51:44 SkyScan query 04:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:51:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:51:45 Message to Master queued w/err=0: serial=94589 error=0 04:51:50 Received message from Master: op=Filter serial=94590 04:51:50 Color wheel filter change from 0 to 0 04:51:50 FLIGetFilterPos err=0 currentPosition=0 04:51:50 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:50 Filter is already there-color wheel unchanged 04:51:50 Received message from Master: op=Shutter serial=94591 04:51:50 Shutter LASER close 04:51:50 Received message from Camera: op=State serial=94593 04:51:50 GetSingleValue result=40 Value=cccccccc 04:51:50 SkyScan query 04:51:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:51:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:51 Parameters OK 04:51:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:51 Set A/D data flow result=40 04:51:51 Set A/D channel type result=40 04:51:51 Set A/D encoding result=40 04:51:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:51 Set channel filter=0.000000e+000 result=40 04:51:51 Config A/D Result=40 04:51:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:51 Get A/D filter: -9.255963e+061 result=40 04:51:51 Get A/D value=-858993460 result=40 04:51:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:51 Parameters OK 04:51:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:51 Set A/D data flow result=40 04:51:51 Set A/D channel type result=40 04:51:51 Set A/D encoding result=40 04:51:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:51 Set channel filter=0.000000e+000 result=40 04:51:51 Config A/D Result=40 04:51:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:51 Get A/D filter: -9.255963e+061 result=40 04:51:51 Get A/D value=-858993460 result=40 04:51:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:51 Aux= 04:51:51 Message to Camera, serial 94593 queued 04:52:27 Received message from Master: op=PointingHead serial=94606 04:52:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:52:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:52:28 Point started: ret=0 04:52:28 point_skyscan result=0 04:52:29 Check angles 04:52:29 SkyScan query 04:52:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:52:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:52:29 Message to Master queued w/err=0: serial=94606 error=0 04:52:34 Received message from Master: op=Filter serial=94607 04:52:34 Color wheel filter change from 0 to 0 04:52:34 FLIGetFilterPos err=0 currentPosition=0 04:52:34 FLIGetStepsRemaining err=0 RemainingSteps=0 04:52:34 Filter is already there-color wheel unchanged 04:52:34 Received message from Master: op=Shutter serial=94608 04:52:34 Shutter LASER close 04:52:34 Received message from Camera: op=State serial=94610 04:52:34 GetSingleValue result=40 Value=cccccccc 04:52:34 SkyScan query 04:52:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:52:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:35 Parameters OK 04:52:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:35 Set A/D data flow result=40 04:52:35 Set A/D channel type result=40 04:52:35 Set A/D encoding result=40 04:52:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:35 Set channel filter=0.000000e+000 result=40 04:52:35 Config A/D Result=40 04:52:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:35 Get A/D filter: -9.255963e+061 result=40 04:52:35 Get A/D value=-858993460 result=40 04:52:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:35 Parameters OK 04:52:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:35 Set A/D data flow result=40 04:52:35 Set A/D channel type result=40 04:52:35 Set A/D encoding result=40 04:52:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:35 Set channel filter=0.000000e+000 result=40 04:52:35 Config A/D Result=40 04:52:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:35 Get A/D filter: -9.255963e+061 result=40 04:52:35 Get A/D value=-858993460 result=40 04:52:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:52:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:52:35 Aux= 04:52:35 Message to Camera, serial 94610 queued 04:53:12 Received message from Master: op=PointingHead serial=94623 04:53:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:53:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:53:12 Point started: ret=0 04:53:12 point_skyscan result=0 04:53:13 Check angles 04:53:13 SkyScan query 04:53:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.995<-13533 Statuses=0008 0009 04:53:13 Msec=0 True Az=112.995 Ze=-22.995 Az status=0008 Ze status=0009 04:53:14 Check angles 04:53:14 SkyScan query 04:53:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.98<-14932 Statuses=0008 0009 04:53:14 Msec=750 True Az=112.995 Ze=-43.98 Az status=0008 Ze status=0009 04:53:14 Check angles 04:53:14 SkyScan query 04:53:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.92<-16328 Statuses=0008 0009 04:53:15 Msec=1500 True Az=112.995 Ze=-64.92 Az status=0008 Ze status=0009 04:53:15 Check angles 04:53:15 SkyScan query 04:53:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 04:53:16 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 04:53:16 Check angles 04:53:16 SkyScan query 04:53:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.28<-19152 Statuses=0008 0009 04:53:16 Msec=3000 True Az=112.995 Ze=-107.28 Az status=0008 Ze status=0009 04:53:17 Check angles 04:53:17 SkyScan query 04:53:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.22<-20548 Statuses=0008 0009 04:53:17 Msec=3750 True Az=112.995 Ze=-128.22 Az status=0008 Ze status=0009 04:53:17 Check angles 04:53:17 SkyScan query 04:53:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.175<-21945 Statuses=0008 0009 04:53:18 Msec=4500 True Az=112.995 Ze=-149.175 Az status=0008 Ze status=0009 04:53:18 Check angles 04:53:18 SkyScan query 04:53:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.535<-23369 Statuses=0008 0009 04:53:19 Msec=5250 True Az=112.995 Ze=-170.535 Az status=0008 Ze status=0009 04:53:19 Check angles 04:53:19 SkyScan query 04:53:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:53:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:53:19 Message to Master queued w/err=0: serial=94623 error=0 04:53:24 Received message from Master: op=Filter serial=94624 04:53:24 Color wheel filter change from 0 to 0 04:53:24 FLIGetFilterPos err=0 currentPosition=0 04:53:24 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:24 Filter is already there-color wheel unchanged 04:53:25 Received message from Master: op=Shutter serial=94625 04:53:25 Shutter LASER open 04:53:25 Received message from Camera: op=State serial=94627 04:53:25 GetSingleValue result=40 Value=cccccccc 04:53:25 SkyScan query 04:53:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:53:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:25 Parameters OK 04:53:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:25 Set A/D data flow result=40 04:53:25 Set A/D channel type result=40 04:53:25 Set A/D encoding result=40 04:53:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:25 Set channel filter=0.000000e+000 result=40 04:53:25 Config A/D Result=40 04:53:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:25 Get A/D filter: -9.255963e+061 result=40 04:53:25 Get A/D value=-858993460 result=40 04:53:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:25 Parameters OK 04:53:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:25 Set A/D data flow result=40 04:53:25 Set A/D channel type result=40 04:53:25 Set A/D encoding result=40 04:53:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:25 Set channel filter=0.000000e+000 result=40 04:53:25 Config A/D Result=40 04:53:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:25 Get A/D filter: -9.255963e+061 result=40 04:53:25 Get A/D value=-858993460 result=40 04:53:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:25 Aux= 04:53:25 Message to Camera, serial 94627 queued 04:53:34 Received message from Master: op=Shutter serial=94637 04:53:34 Shutter LASER close 04:53:34 Received message from Master: op=PointingHead serial=94641 04:53:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:53:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:53:35 Point started: ret=0 04:53:35 point_skyscan result=0 04:53:35 Check angles 04:53:35 SkyScan query 04:53:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 04:53:36 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 04:53:36 Check angles 04:53:36 SkyScan query 04:53:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.43<-20162 Statuses=0008 0009 04:53:37 Msec=750 True Az=112.995 Ze=-122.43 Az status=0008 Ze status=0009 04:53:37 Check angles 04:53:37 SkyScan query 04:53:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.025<-18735 Statuses=0008 0009 04:53:37 Msec=1500 True Az=112.995 Ze=-101.025 Az status=0008 Ze status=0009 04:53:38 Check angles 04:53:38 SkyScan query 04:53:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 04:53:38 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 04:53:38 Check angles 04:53:38 SkyScan query 04:53:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.13<-15942 Statuses=0008 0009 04:53:39 Msec=3000 True Az=112.995 Ze=-59.13 Az status=0008 Ze status=0009 04:53:39 Check angles 04:53:39 SkyScan query 04:53:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.145<-14543 Statuses=0008 0009 04:53:40 Msec=3750 True Az=112.995 Ze=-38.145 Az status=0008 Ze status=0009 04:53:40 Check angles 04:53:40 SkyScan query 04:53:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.77<-13118 Statuses=0008 0009 04:53:41 Msec=4500 True Az=112.995 Ze=-16.77 Az status=0008 Ze status=0009 04:53:41 Check angles 04:53:41 SkyScan query 04:53:41 SkyScan query done: ret=0 az=112.995<-7533 ze=4.17<-11722 Statuses=0008 0009 04:53:41 Msec=5250 True Az=112.995 Ze=4.17 Az status=0008 Ze status=0009 04:53:41 Check angles 04:53:41 SkyScan query 04:53:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:53:42 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:53:42 Message to Master queued w/err=0: serial=94641 error=0 04:53:47 Received message from Master: op=Filter serial=94642 04:53:47 Color wheel filter change from 0 to 0 04:53:47 FLIGetFilterPos err=0 currentPosition=0 04:53:47 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:47 Filter is already there-color wheel unchanged 04:53:47 Received message from Master: op=Shutter serial=94643 04:53:47 Shutter LASER close 04:53:47 Received message from Camera: op=State serial=94645 04:53:47 GetSingleValue result=40 Value=cccccccc 04:53:47 SkyScan query 04:53:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:53:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:48 Parameters OK 04:53:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:48 Set A/D data flow result=40 04:53:48 Set A/D channel type result=40 04:53:48 Set A/D encoding result=40 04:53:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:48 Set channel filter=0.000000e+000 result=40 04:53:48 Config A/D Result=40 04:53:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:48 Get A/D filter: -9.255963e+061 result=40 04:53:48 Get A/D value=-858993460 result=40 04:53:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:48 Parameters OK 04:53:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:48 Set A/D data flow result=40 04:53:48 Set A/D channel type result=40 04:53:48 Set A/D encoding result=40 04:53:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:48 Set channel filter=0.000000e+000 result=40 04:53:48 Config A/D Result=40 04:53:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:48 Get A/D filter: -9.255963e+061 result=40 04:53:48 Get A/D value=-858993460 result=40 04:53:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:48 Aux= 04:53:48 Message to Camera, serial 94645 queued 04:54:25 Received message from Master: op=PointingHead serial=94658 04:54:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:54:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:54:25 Point started: ret=0 04:54:25 point_skyscan result=0 04:54:26 Check angles 04:54:26 SkyScan query 04:54:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:54:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:54:26 Message to Master queued w/err=0: serial=94658 error=0 04:54:31 Received message from Master: op=Filter serial=94659 04:54:31 Color wheel filter change from 0 to 0 [UTC 2019-3-4 04:54:31] 04:54:31 FLIGetFilterPos err=0 currentPosition=0 04:54:31 FLIGetStepsRemaining err=0 RemainingSteps=0 04:54:31 Filter is already there-color wheel unchanged 04:54:32 Received message from Master: op=Shutter serial=94660 04:54:32 Shutter LASER close 04:54:32 Received message from Camera: op=State serial=94662 04:54:32 GetSingleValue result=40 Value=cccccccc 04:54:32 SkyScan query 04:54:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:54:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:32 Parameters OK 04:54:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:32 Set A/D data flow result=40 04:54:32 Set A/D channel type result=40 04:54:32 Set A/D encoding result=40 04:54:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:32 Set channel filter=0.000000e+000 result=40 04:54:32 Config A/D Result=40 04:54:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:32 Get A/D filter: -9.255963e+061 result=40 04:54:32 Get A/D value=-858993460 result=40 04:54:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:32 Parameters OK 04:54:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:32 Set A/D data flow result=40 04:54:32 Set A/D channel type result=40 04:54:32 Set A/D encoding result=40 04:54:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:32 Set channel filter=0.000000e+000 result=40 04:54:32 Config A/D Result=40 04:54:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:32 Get A/D filter: -9.255963e+061 result=40 04:54:32 Get A/D value=-858993460 result=40 04:54:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:54:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:54:32 Aux= 04:54:32 Message to Camera, serial 94662 queued 04:55:09 Received message from Master: op=PointingHead serial=94675 04:55:09 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:55:09 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:55:10 Point started: ret=0 04:55:10 point_skyscan result=0 04:55:10 Check angles 04:55:10 SkyScan query 04:55:11 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 04:55:11 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 04:55:11 Check angles 04:55:11 SkyScan query 04:55:12 SkyScan query done: ret=0 az=153.51<-10234 ze=-6.495<-12433 Statuses=0009 0008 04:55:12 Msec=750 True Az=153.51 Ze=-6.495 Az status=0009 Ze status=0008 04:55:12 Check angles 04:55:12 SkyScan query 04:55:12 SkyScan query done: ret=0 az=170.955<-11397 ze=-6.495<-12433 Statuses=0009 0008 04:55:12 Msec=1500 True Az=170.955 Ze=-6.495 Az status=0009 Ze status=0008 04:55:13 Check angles 04:55:13 SkyScan query 04:55:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:55:13 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 04:55:13 Message to Master queued w/err=0: serial=94675 error=0 04:55:18 Received message from Master: op=Filter serial=94676 04:55:18 Color wheel filter change from 0 to 0 04:55:18 FLIGetFilterPos err=0 currentPosition=0 04:55:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:55:18 Filter is already there-color wheel unchanged 04:55:18 Received message from Master: op=Shutter serial=94677 04:55:18 Shutter LASER close 04:55:18 Received message from Camera: op=State serial=94679 04:55:18 GetSingleValue result=40 Value=cccccccc 04:55:18 SkyScan query 04:55:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:55:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:19 Parameters OK 04:55:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:19 Set A/D data flow result=40 04:55:19 Set A/D channel type result=40 04:55:19 Set A/D encoding result=40 04:55:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:19 Set channel filter=0.000000e+000 result=40 04:55:19 Config A/D Result=40 04:55:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:19 Get A/D filter: -9.255963e+061 result=40 04:55:19 Get A/D value=-858993460 result=40 04:55:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:19 Parameters OK 04:55:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:19 Set A/D data flow result=40 04:55:19 Set A/D channel type result=40 04:55:19 Set A/D encoding result=40 04:55:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:19 Set channel filter=0.000000e+000 result=40 04:55:19 Config A/D Result=40 04:55:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:19 Get A/D filter: -9.255963e+061 result=40 04:55:19 Get A/D value=-858993460 result=40 04:55:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:55:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:55:19 Aux= 04:55:19 Message to Camera, serial 94679 queued 04:55:56 Received message from Master: op=PointingHead serial=94692 04:55:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:55:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:55:56 Point started: ret=0 04:55:56 point_skyscan result=0 04:55:57 Check angles 04:55:57 SkyScan query 04:55:57 SkyScan query done: ret=0 az=152.76<-10184 ze=6.51<-11566 Statuses=0009 0008 04:55:57 Msec=0 True Az=152.76 Ze=6.51 Az status=0009 Ze status=0008 04:55:58 Check angles 04:55:58 SkyScan query 04:55:58 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 04:55:58 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 04:55:58 Check angles 04:55:58 SkyScan query 04:55:59 SkyScan query done: ret=0 az=117.705<-7847 ze=6.495<-11567 Statuses=0009 0008 04:55:59 Msec=1500 True Az=117.705 Ze=6.495 Az status=0009 Ze status=0008 04:55:59 Check angles 04:55:59 SkyScan query 04:56:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:56:00 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:56:00 Message to Master queued w/err=0: serial=94692 error=0 04:56:05 Received message from Master: op=Filter serial=94693 04:56:05 Color wheel filter change from 0 to 0 04:56:05 FLIGetFilterPos err=0 currentPosition=0 04:56:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:05 Filter is already there-color wheel unchanged 04:56:05 Received message from Master: op=Shutter serial=94694 04:56:05 Shutter LASER close 04:56:05 Received message from Camera: op=State serial=94696 04:56:05 GetSingleValue result=40 Value=cccccccc 04:56:05 SkyScan query 04:56:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:56:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:05 Parameters OK 04:56:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:05 Set A/D data flow result=40 04:56:05 Set A/D channel type result=40 04:56:05 Set A/D encoding result=40 04:56:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:05 Set channel filter=0.000000e+000 result=40 04:56:05 Config A/D Result=40 04:56:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:05 Get A/D filter: -9.255963e+061 result=40 04:56:05 Get A/D value=-858993460 result=40 04:56:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:05 Parameters OK 04:56:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:05 Set A/D data flow result=40 04:56:05 Set A/D channel type result=40 04:56:05 Set A/D encoding result=40 04:56:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:05 Set channel filter=0.000000e+000 result=40 04:56:05 Config A/D Result=40 04:56:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:05 Get A/D filter: -9.255963e+061 result=40 04:56:05 Get A/D value=-858993460 result=40 04:56:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:05 Aux= 04:56:05 Message to Camera, serial 94696 queued 04:56:41 Received message from Master: op=PointingHead serial=94708 04:56:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:56:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:56:42 Point started: ret=0 04:56:42 point_skyscan result=0 04:56:42 Check angles 04:56:42 SkyScan query 04:56:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.715<-13581 Statuses=0008 0009 04:56:43 Msec=0 True Az=112.995 Ze=-23.715 Az status=0008 Ze status=0009 04:56:43 Check angles 04:56:43 SkyScan query 04:56:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.655<-14977 Statuses=0008 0009 04:56:44 Msec=750 True Az=112.995 Ze=-44.655 Az status=0008 Ze status=0009 04:56:44 Check angles 04:56:44 SkyScan query 04:56:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.61<-16374 Statuses=0008 0009 04:56:45 Msec=1500 True Az=112.995 Ze=-65.61 Az status=0008 Ze status=0009 04:56:45 Check angles 04:56:45 SkyScan query 04:56:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.535<-17769 Statuses=0008 0009 04:56:45 Msec=2250 True Az=112.995 Ze=-86.535 Az status=0008 Ze status=0009 04:56:45 Check angles 04:56:45 SkyScan query 04:56:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.52<-19168 Statuses=0008 0009 04:56:46 Msec=3000 True Az=112.995 Ze=-107.52 Az status=0008 Ze status=0009 04:56:46 Check angles 04:56:46 SkyScan query 04:56:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.445<-20563 Statuses=0008 0009 04:56:47 Msec=3750 True Az=112.995 Ze=-128.445 Az status=0008 Ze status=0009 04:56:47 Check angles 04:56:47 SkyScan query 04:56:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.4<-21960 Statuses=0008 0009 04:56:48 Msec=4500 True Az=112.995 Ze=-149.4 Az status=0008 Ze status=0009 04:56:48 Check angles 04:56:48 SkyScan query 04:56:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.355<-23357 Statuses=0008 0009 04:56:48 Msec=5250 True Az=112.995 Ze=-170.355 Az status=0008 Ze status=0009 04:56:48 Check angles 04:56:48 SkyScan query 04:56:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:56:49 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:56:49 Message to Master queued w/err=0: serial=94708 error=0 04:56:54 Received message from Master: op=Filter serial=94709 04:56:54 Color wheel filter change from 0 to 0 04:56:54 FLIGetFilterPos err=0 currentPosition=0 04:56:54 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:54 Filter is already there-color wheel unchanged 04:56:54 Received message from Master: op=Shutter serial=94710 04:56:54 Shutter LASER open 04:56:54 Received message from Camera: op=State serial=94712 04:56:54 GetSingleValue result=40 Value=cccccccc 04:56:54 SkyScan query 04:56:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:56:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:55 Parameters OK 04:56:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:55 Set A/D data flow result=40 04:56:55 Set A/D channel type result=40 04:56:55 Set A/D encoding result=40 04:56:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:55 Set channel filter=0.000000e+000 result=40 04:56:55 Config A/D Result=40 04:56:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:55 Get A/D filter: -9.255963e+061 result=40 04:56:55 Get A/D value=-858993460 result=40 04:56:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:55 Parameters OK 04:56:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:55 Set A/D data flow result=40 04:56:55 Set A/D channel type result=40 04:56:55 Set A/D encoding result=40 04:56:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:55 Set channel filter=0.000000e+000 result=40 04:56:55 Config A/D Result=40 04:56:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:55 Get A/D filter: -9.255963e+061 result=40 04:56:55 Get A/D value=-858993460 result=40 04:56:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:55 Aux= 04:56:55 Message to Camera, serial 94712 queued 04:57:03 Received message from Master: op=Shutter serial=94722 04:57:03 Shutter LASER close 04:57:04 Received message from Master: op=PointingHead serial=94726 04:57:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:57:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:57:04 Point started: ret=0 04:57:04 point_skyscan result=0 04:57:05 Check angles 04:57:05 SkyScan query 04:57:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.13<-21542 Statuses=0008 0009 04:57:05 Msec=0 True Az=112.995 Ze=-143.13 Az status=0008 Ze status=0009 04:57:06 Check angles 04:57:06 SkyScan query 04:57:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 04:57:06 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 04:57:06 Check angles 04:57:06 SkyScan query 04:57:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.235<-18749 Statuses=0008 0009 04:57:07 Msec=1500 True Az=112.995 Ze=-101.235 Az status=0008 Ze status=0009 04:57:07 Check angles 04:57:07 SkyScan query 04:57:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.28<-17352 Statuses=0008 0009 04:57:08 Msec=2250 True Az=112.995 Ze=-80.28 Az status=0008 Ze status=0009 04:57:08 Check angles 04:57:08 SkyScan query 04:57:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.34<-15956 Statuses=0008 0009 04:57:08 Msec=3000 True Az=112.995 Ze=-59.34 Az status=0008 Ze status=0009 04:57:09 Check angles 04:57:09 SkyScan query 04:57:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.37<-14558 Statuses=0008 0009 04:57:09 Msec=3750 True Az=112.995 Ze=-38.37 Az status=0008 Ze status=0009 04:57:09 Check angles 04:57:09 SkyScan query 04:57:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.98<-13132 Statuses=0008 0009 04:57:10 Msec=4500 True Az=112.995 Ze=-16.98 Az status=0008 Ze status=0009 04:57:10 Check angles 04:57:10 SkyScan query 04:57:11 SkyScan query done: ret=0 az=112.995<-7533 ze=3.975<-11735 Statuses=0008 0009 04:57:11 Msec=5250 True Az=112.995 Ze=3.975 Az status=0008 Ze status=0009 04:57:11 Check angles 04:57:11 SkyScan query 04:57:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:57:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:57:11 Message to Master queued w/err=0: serial=94726 error=0 04:57:16 Received message from Master: op=Filter serial=94727 04:57:16 Color wheel filter change from 0 to 0 04:57:16 FLIGetFilterPos err=0 currentPosition=0 04:57:16 FLIGetStepsRemaining err=0 RemainingSteps=0 04:57:16 Filter is already there-color wheel unchanged 04:57:17 Received message from Master: op=Shutter serial=94728 04:57:17 Shutter LASER close 04:57:17 Received message from Camera: op=State serial=94730 04:57:17 GetSingleValue result=40 Value=cccccccc 04:57:17 SkyScan query 04:57:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:57:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:17 Parameters OK 04:57:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:17 Set A/D data flow result=40 04:57:17 Set A/D channel type result=40 04:57:17 Set A/D encoding result=40 04:57:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:17 Set channel filter=0.000000e+000 result=40 04:57:17 Config A/D Result=40 04:57:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:17 Get A/D filter: -9.255963e+061 result=40 04:57:17 Get A/D value=-858993460 result=40 04:57:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:17 Parameters OK 04:57:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:17 Set A/D data flow result=40 04:57:17 Set A/D channel type result=40 04:57:17 Set A/D encoding result=40 04:57:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:17 Set channel filter=0.000000e+000 result=40 04:57:17 Config A/D Result=40 04:57:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:17 Get A/D filter: -9.255963e+061 result=40 04:57:17 Get A/D value=-858993460 result=40 04:57:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:57:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:57:17 Aux= 04:57:17 Message to Camera, serial 94730 queued 04:57:54 Received message from Master: op=PointingHead serial=94743 04:57:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:57:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:57:55 Point started: ret=0 04:57:55 point_skyscan result=0 04:57:55 Check angles 04:57:55 SkyScan query 04:57:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:57:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:57:56 Message to Master queued w/err=0: serial=94743 error=0 04:58:01 Received message from Master: op=Filter serial=94744 04:58:01 Color wheel filter change from 0 to 0 04:58:01 FLIGetFilterPos err=0 currentPosition=0 04:58:01 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:01 Filter is already there-color wheel unchanged 04:58:01 Received message from Master: op=Shutter serial=94745 04:58:01 Shutter LASER close 04:58:01 Received message from Camera: op=State serial=94747 04:58:01 GetSingleValue result=40 Value=cccccccc 04:58:01 SkyScan query 04:58:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:58:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:02 Parameters OK 04:58:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:02 Set A/D data flow result=40 04:58:02 Set A/D channel type result=40 04:58:02 Set A/D encoding result=40 04:58:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:02 Set channel filter=0.000000e+000 result=40 04:58:02 Config A/D Result=40 04:58:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:02 Get A/D filter: -9.255963e+061 result=40 04:58:02 Get A/D value=-858993460 result=40 04:58:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:02 Parameters OK 04:58:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:02 Set A/D data flow result=40 04:58:02 Set A/D channel type result=40 04:58:02 Set A/D encoding result=40 04:58:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:02 Set channel filter=0.000000e+000 result=40 04:58:02 Config A/D Result=40 04:58:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:02 Get A/D filter: -9.255963e+061 result=40 04:58:02 Get A/D value=-858993460 result=40 04:58:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:02 Aux= 04:58:02 Message to Camera, serial 94747 queued 04:58:39 Received message from Master: op=PointingHead serial=94760 04:58:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:58:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:58:39 Point started: ret=0 04:58:39 point_skyscan result=0 04:58:40 Check angles 04:58:40 SkyScan query 04:58:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:58:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:58:40 Message to Master queued w/err=0: serial=94760 error=0 04:58:45 Received message from Master: op=Filter serial=94761 04:58:45 Color wheel filter change from 0 to 0 04:58:45 FLIGetFilterPos err=0 currentPosition=0 04:58:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:45 Filter is already there-color wheel unchanged 04:58:45 Received message from Master: op=Shutter serial=94762 04:58:45 Shutter LASER close 04:58:45 Received message from Camera: op=State serial=94764 04:58:45 GetSingleValue result=40 Value=cccccccc 04:58:45 SkyScan query 04:58:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:58:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:46 Parameters OK 04:58:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:46 Set A/D data flow result=40 04:58:46 Set A/D channel type result=40 04:58:46 Set A/D encoding result=40 04:58:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:46 Set channel filter=0.000000e+000 result=40 04:58:46 Config A/D Result=40 04:58:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:46 Get A/D filter: -9.255963e+061 result=40 04:58:46 Get A/D value=-858993460 result=40 04:58:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:46 Parameters OK 04:58:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:46 Set A/D data flow result=40 04:58:46 Set A/D channel type result=40 04:58:46 Set A/D encoding result=40 04:58:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:46 Set channel filter=0.000000e+000 result=40 04:58:46 Config A/D Result=40 04:58:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:46 Get A/D filter: -9.255963e+061 result=40 04:58:46 Get A/D value=-858993460 result=40 04:58:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:46 Aux= 04:58:46 Message to Camera, serial 94764 queued 04:59:23 Received message from Master: op=PointingHead serial=94777 04:59:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:59:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:59:23 Point started: ret=0 04:59:23 point_skyscan result=0 04:59:24 Check angles 04:59:24 SkyScan query 04:59:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:59:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:59:25 Message to Master queued w/err=0: serial=94777 error=0 04:59:30 Received message from Master: op=Filter serial=94778 04:59:30 Color wheel filter change from 0 to 0 04:59:30 FLIGetFilterPos err=0 currentPosition=0 04:59:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:59:30 Filter is already there-color wheel unchanged 04:59:30 Received message from Master: op=Shutter serial=94779 04:59:30 Shutter LASER close 04:59:30 Received message from Camera: op=State serial=94781 04:59:30 GetSingleValue result=40 Value=cccccccc 04:59:30 SkyScan query 04:59:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:59:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:30 Parameters OK 04:59:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:30 Set A/D data flow result=40 04:59:30 Set A/D channel type result=40 04:59:30 Set A/D encoding result=40 04:59:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:30 Set channel filter=0.000000e+000 result=40 04:59:30 Config A/D Result=40 04:59:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:30 Get A/D filter: -9.255963e+061 result=40 04:59:30 Get A/D value=-858993460 result=40 04:59:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:30 Parameters OK 04:59:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:30 Set A/D data flow result=40 04:59:30 Set A/D channel type result=40 04:59:30 Set A/D encoding result=40 04:59:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:30 Set channel filter=0.000000e+000 result=40 04:59:30 Config A/D Result=40 04:59:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:30 Get A/D filter: -9.255963e+061 result=40 04:59:30 Get A/D value=-858993460 result=40 04:59:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:59:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:59:30 Aux= 04:59:30 Message to Camera, serial 94781 queued 05:00:07 Received message from Master: op=PointingHead serial=94794 05:00:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:00:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:00:07 Point started: ret=0 05:00:07 point_skyscan result=0 05:00:08 Check angles 05:00:08 SkyScan query 05:00:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 05:00:09 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 05:00:09 Check angles 05:00:09 SkyScan query 05:00:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.07<-14938 Statuses=0008 0009 05:00:10 Msec=750 True Az=112.995 Ze=-44.07 Az status=0008 Ze status=0009 05:00:10 Check angles 05:00:10 SkyScan query 05:00:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.995<-16333 Statuses=0008 0009 05:00:10 Msec=1500 True Az=112.995 Ze=-64.995 Az status=0008 Ze status=0009 05:00:10 Check angles 05:00:10 SkyScan query 05:00:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.995<-17733 Statuses=0008 0009 05:00:11 Msec=2250 True Az=112.995 Ze=-85.995 Az status=0008 Ze status=0009 05:00:11 Check angles 05:00:11 SkyScan query 05:00:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.905<-19127 Statuses=0008 0009 05:00:12 Msec=3000 True Az=112.995 Ze=-106.905 Az status=0008 Ze status=0009 05:00:12 Check angles 05:00:12 SkyScan query 05:00:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.89<-20526 Statuses=0008 0009 05:00:13 Msec=3750 True Az=112.995 Ze=-127.89 Az status=0008 Ze status=0009 05:00:13 Check angles 05:00:13 SkyScan query 05:00:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.815<-21921 Statuses=0008 0009 05:00:13 Msec=4500 True Az=112.995 Ze=-148.815 Az status=0008 Ze status=0009 05:00:13 Check angles 05:00:13 SkyScan query 05:00:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.755<-23317 Statuses=0008 0009 05:00:14 Msec=5250 True Az=112.995 Ze=-169.755 Az status=0008 Ze status=0009 05:00:14 Check angles 05:00:14 SkyScan query 05:00:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:00:15 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:00:15 Message to Master queued w/err=0: serial=94794 error=0 05:00:20 Received message from Master: op=Filter serial=94795 05:00:20 Color wheel filter change from 0 to 0 05:00:20 FLIGetFilterPos err=0 currentPosition=0 05:00:20 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:20 Filter is already there-color wheel unchanged 05:00:20 Received message from Master: op=Shutter serial=94796 05:00:20 Shutter LASER open 05:00:20 Received message from Camera: op=State serial=94798 05:00:20 GetSingleValue result=40 Value=cccccccc 05:00:20 SkyScan query 05:00:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:00:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:21 Parameters OK 05:00:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:21 Set A/D data flow result=40 05:00:21 Set A/D channel type result=40 05:00:21 Set A/D encoding result=40 05:00:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:21 Set channel filter=0.000000e+000 result=40 05:00:21 Config A/D Result=40 05:00:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:21 Get A/D filter: -9.255963e+061 result=40 05:00:21 Get A/D value=-858993460 result=40 05:00:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:21 Parameters OK 05:00:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:21 Set A/D data flow result=40 05:00:21 Set A/D channel type result=40 05:00:21 Set A/D encoding result=40 05:00:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:21 Set channel filter=0.000000e+000 result=40 05:00:21 Config A/D Result=40 05:00:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:21 Get A/D filter: -9.255963e+061 result=40 05:00:21 Get A/D value=-858993460 result=40 05:00:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:21 Aux= 05:00:21 Message to Camera, serial 94798 queued 05:00:29 Received message from Master: op=Shutter serial=94808 05:00:29 Shutter LASER close 05:00:30 Received message from Master: op=PointingHead serial=94812 05:00:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:00:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:00:30 Point started: ret=0 05:00:30 point_skyscan result=0 05:00:31 Check angles 05:00:31 SkyScan query 05:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 05:00:31 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 05:00:32 Check angles 05:00:32 SkyScan query 05:00:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.445<-20163 Statuses=0008 0009 05:00:32 Msec=750 True Az=112.995 Ze=-122.445 Az status=0008 Ze status=0009 05:00:32 Check angles 05:00:32 SkyScan query 05:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.475<-18765 Statuses=0008 0009 05:00:33 Msec=1500 True Az=112.995 Ze=-101.475 Az status=0008 Ze status=0009 05:00:33 Check angles 05:00:33 SkyScan query 05:00:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.49<-17366 Statuses=0008 0009 05:00:34 Msec=2250 True Az=112.995 Ze=-80.49 Az status=0008 Ze status=0009 05:00:34 Check angles 05:00:34 SkyScan query 05:00:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.55<-15970 Statuses=0008 0009 05:00:34 Msec=3000 True Az=112.995 Ze=-59.55 Az status=0008 Ze status=0009 05:00:35 Check angles 05:00:35 SkyScan query 05:00:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.595<-14573 Statuses=0008 0009 05:00:35 Msec=3750 True Az=112.995 Ze=-38.595 Az status=0008 Ze status=0009 05:00:35 Check angles 05:00:35 SkyScan query 05:00:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.64<-13176 Statuses=0008 0009 05:00:36 Msec=4500 True Az=112.995 Ze=-17.64 Az status=0008 Ze status=0009 05:00:36 Check angles 05:00:36 SkyScan query 05:00:37 SkyScan query done: ret=0 az=112.995<-7533 ze=3.3<-11780 Statuses=0008 0009 05:00:37 Msec=5250 True Az=112.995 Ze=3.3 Az status=0008 Ze status=0009 05:00:37 Check angles 05:00:37 SkyScan query 05:00:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:00:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:00:37 Message to Master queued w/err=0: serial=94812 error=0 05:00:42 Received message from Master: op=Filter serial=94813 05:00:42 Color wheel filter change from 0 to 0 05:00:42 FLIGetFilterPos err=0 currentPosition=0 05:00:42 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:42 Filter is already there-color wheel unchanged 05:00:43 Received message from Master: op=Shutter serial=94814 05:00:43 Shutter LASER close 05:00:43 Received message from Camera: op=State serial=94816 05:00:43 GetSingleValue result=40 Value=cccccccc 05:00:43 SkyScan query 05:00:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:00:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:43 Parameters OK 05:00:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:43 Set A/D data flow result=40 05:00:43 Set A/D channel type result=40 05:00:43 Set A/D encoding result=40 05:00:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:43 Set channel filter=0.000000e+000 result=40 05:00:43 Config A/D Result=40 05:00:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:43 Get A/D filter: -9.255963e+061 result=40 05:00:43 Get A/D value=-858993460 result=40 05:00:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:43 Parameters OK 05:00:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:43 Set A/D data flow result=40 05:00:43 Set A/D channel type result=40 05:00:43 Set A/D encoding result=40 05:00:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:43 Set channel filter=0.000000e+000 result=40 05:00:43 Config A/D Result=40 05:00:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:43 Get A/D filter: -9.255963e+061 result=40 05:00:43 Get A/D value=-858993460 result=40 05:00:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:43 Aux= 05:00:43 Message to Camera, serial 94816 queued 05:01:20 Received message from Master: op=PointingHead serial=94829 05:01:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:01:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:01:21 Point started: ret=0 05:01:21 point_skyscan result=0 05:01:21 Check angles 05:01:21 SkyScan query 05:01:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:01:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:01:22 Message to Master queued w/err=0: serial=94829 error=0 05:01:27 Received message from Master: op=Filter serial=94830 05:01:27 Color wheel filter change from 0 to 0 05:01:27 FLIGetFilterPos err=0 currentPosition=0 05:01:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:01:27 Filter is already there-color wheel unchanged 05:01:27 Received message from Master: op=Shutter serial=94831 05:01:27 Shutter LASER close 05:01:27 Received message from Camera: op=State serial=94833 05:01:27 GetSingleValue result=40 Value=cccccccc 05:01:27 SkyScan query 05:01:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:01:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:28 Parameters OK 05:01:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:28 Set A/D data flow result=40 05:01:28 Set A/D channel type result=40 05:01:28 Set A/D encoding result=40 05:01:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:28 Set channel filter=0.000000e+000 result=40 05:01:28 Config A/D Result=40 05:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:28 Get A/D filter: -9.255963e+061 result=40 05:01:28 Get A/D value=-858993460 result=40 05:01:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:28 Parameters OK 05:01:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:28 Set A/D data flow result=40 05:01:28 Set A/D channel type result=40 05:01:28 Set A/D encoding result=40 05:01:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:28 Set channel filter=0.000000e+000 result=40 05:01:28 Config A/D Result=40 05:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:28 Get A/D filter: -9.255963e+061 result=40 05:01:28 Get A/D value=-858993460 result=40 05:01:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:01:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:01:28 Aux= 05:01:28 Message to Camera, serial 94833 queued 05:02:05 Received message from Master: op=PointingHead serial=94846 05:02:05 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:02:05 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:02:05 Point started: ret=0 05:02:05 point_skyscan result=0 05:02:06 Check angles 05:02:06 SkyScan query 05:02:06 SkyScan query done: ret=0 az=136.35<-9090 ze=-6.51<-12434 Statuses=0009 0008 05:02:06 Msec=0 True Az=136.35 Ze=-6.51 Az status=0009 Ze status=0008 05:02:06 Check angles 05:02:06 SkyScan query 05:02:07 SkyScan query done: ret=0 az=153.765<-10251 ze=-6.495<-12433 Statuses=0009 0008 05:02:07 Msec=750 True Az=153.765 Ze=-6.495 Az status=0009 Ze status=0008 05:02:07 Check angles 05:02:07 SkyScan query 05:02:08 SkyScan query done: ret=0 az=171.21<-11414 ze=-6.495<-12433 Statuses=0009 0008 05:02:08 Msec=1500 True Az=171.21 Ze=-6.495 Az status=0009 Ze status=0008 05:02:08 Check angles 05:02:08 SkyScan query 05:02:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:02:08 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:02:08 Message to Master queued w/err=0: serial=94846 error=0 05:02:13 Received message from Master: op=Filter serial=94847 05:02:13 Color wheel filter change from 0 to 0 05:02:13 FLIGetFilterPos err=0 currentPosition=0 05:02:13 FLIGetStepsRemaining err=0 RemainingSteps=0 05:02:13 Filter is already there-color wheel unchanged 05:02:14 Received message from Master: op=Shutter serial=94848 05:02:14 Shutter LASER close 05:02:14 Received message from Camera: op=State serial=94850 05:02:14 GetSingleValue result=40 Value=cccccccc 05:02:14 SkyScan query 05:02:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:02:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:14 Parameters OK 05:02:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:14 Set A/D data flow result=40 05:02:14 Set A/D channel type result=40 05:02:14 Set A/D encoding result=40 05:02:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:14 Set channel filter=0.000000e+000 result=40 05:02:14 Config A/D Result=40 05:02:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:14 Get A/D filter: -9.255963e+061 result=40 05:02:14 Get A/D value=-858993460 result=40 05:02:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:14 Parameters OK 05:02:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:14 Set A/D data flow result=40 05:02:14 Set A/D channel type result=40 05:02:14 Set A/D encoding result=40 05:02:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:14 Set channel filter=0.000000e+000 result=40 05:02:14 Config A/D Result=40 05:02:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:14 Get A/D filter: -9.255963e+061 result=40 05:02:14 Get A/D value=-858993460 result=40 05:02:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:02:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:02:14 Aux= 05:02:14 Message to Camera, serial 94850 queued 05:02:51 Received message from Master: op=PointingHead serial=94863 05:02:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:02:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:02:51 Point started: ret=0 05:02:51 point_skyscan result=0 05:02:52 Check angles 05:02:52 SkyScan query 05:02:53 SkyScan query done: ret=0 az=153.03<-10202 ze=6.51<-11566 Statuses=0009 0008 05:02:53 Msec=0 True Az=153.03 Ze=6.51 Az status=0009 Ze status=0008 05:02:53 Check angles 05:02:53 SkyScan query 05:02:54 SkyScan query done: ret=0 az=135.525<-9035 ze=6.495<-11567 Statuses=0009 0008 05:02:54 Msec=750 True Az=135.525 Ze=6.495 Az status=0009 Ze status=0008 05:02:54 Check angles 05:02:54 SkyScan query 05:02:54 SkyScan query done: ret=0 az=118.05<-7870 ze=6.495<-11567 Statuses=0009 0008 05:02:54 Msec=1500 True Az=118.05 Ze=6.495 Az status=0009 Ze status=0008 05:02:54 Check angles 05:02:54 SkyScan query 05:02:55 SkyScan query done: ret=0 az=113.01<-7534 ze=6.495<-11567 Statuses=0008 0008 05:02:55 Msec=2250 True Az=113.01 Ze=6.495 Az status=0008 Ze status=0008 05:02:55 Message to Master queued w/err=0: serial=94863 error=0 05:03:00 Received message from Master: op=Filter serial=94864 05:03:00 Color wheel filter change from 0 to 0 05:03:00 FLIGetFilterPos err=0 currentPosition=0 05:03:00 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:00 Filter is already there-color wheel unchanged 05:03:00 Received message from Master: op=Shutter serial=94865 05:03:00 Shutter LASER close 05:03:00 Received message from Camera: op=State serial=94867 05:03:00 GetSingleValue result=40 Value=cccccccc 05:03:00 SkyScan query 05:03:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:03:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:01 Parameters OK 05:03:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:01 Set A/D data flow result=40 05:03:01 Set A/D channel type result=40 05:03:01 Set A/D encoding result=40 05:03:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:01 Set channel filter=0.000000e+000 result=40 05:03:01 Config A/D Result=40 05:03:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:01 Get A/D filter: -9.255963e+061 result=40 05:03:01 Get A/D value=-858993460 result=40 05:03:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:01 Parameters OK 05:03:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:01 Set A/D data flow result=40 05:03:01 Set A/D channel type result=40 05:03:01 Set A/D encoding result=40 05:03:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:01 Set channel filter=0.000000e+000 result=40 05:03:01 Config A/D Result=40 05:03:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:01 Get A/D filter: -9.255963e+061 result=40 05:03:01 Get A/D value=-858993460 result=40 05:03:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:01 Aux= 05:03:01 Message to Camera, serial 94867 queued 05:03:38 Received message from Master: op=PointingHead serial=94880 05:03:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:03:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:03:38 Point started: ret=0 05:03:38 point_skyscan result=0 05:03:38 Received message from Master: op=Identify serial=94881 05:03:39 Check angles 05:03:39 SkyScan query 05:03:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 05:03:39 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 05:03:39 Check angles 05:03:39 SkyScan query 05:03:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 05:03:40 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 05:03:40 Check angles 05:03:40 SkyScan query 05:03:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.01<-16334 Statuses=0008 0009 05:03:41 Msec=1500 True Az=112.995 Ze=-65.01 Az status=0008 Ze status=0009 05:03:41 Check angles 05:03:41 SkyScan query 05:03:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.995<-17733 Statuses=0008 0009 05:03:42 Msec=2250 True Az=112.995 Ze=-85.995 Az status=0008 Ze status=0009 05:03:42 Check angles 05:03:42 SkyScan query 05:03:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.905<-19127 Statuses=0008 0009 05:03:42 Msec=3000 True Az=112.995 Ze=-106.905 Az status=0008 Ze status=0009 05:03:42 Check angles 05:03:42 SkyScan query 05:03:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.89<-20526 Statuses=0008 0009 05:03:43 Msec=3750 True Az=112.995 Ze=-127.89 Az status=0008 Ze status=0009 05:03:43 Check angles 05:03:43 SkyScan query 05:03:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.815<-21921 Statuses=0008 0009 05:03:44 Msec=4500 True Az=112.995 Ze=-148.815 Az status=0008 Ze status=0009 05:03:44 Check angles 05:03:44 SkyScan query 05:03:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.785<-23319 Statuses=0008 0009 05:03:45 Msec=5250 True Az=112.995 Ze=-169.785 Az status=0008 Ze status=0009 05:03:45 Check angles 05:03:45 SkyScan query 05:03:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:03:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:03:45 Message to Master queued w/err=0: serial=94880 error=0 [UTC 2019-3-4 05:03:50] 05:03:50 Received message from Master: op=Filter serial=94884 05:03:50 Color wheel filter change from 0 to 0 05:03:50 FLIGetFilterPos err=0 currentPosition=0 05:03:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:50 Filter is already there-color wheel unchanged 05:03:50 Received message from Master: op=Shutter serial=94885 05:03:50 Shutter LASER open 05:03:51 Received message from Camera: op=State serial=94887 05:03:51 GetSingleValue result=40 Value=cccccccc 05:03:51 SkyScan query 05:03:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:03:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:51 Parameters OK 05:03:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:51 Set A/D data flow result=40 05:03:51 Set A/D channel type result=40 05:03:51 Set A/D encoding result=40 05:03:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:51 Set channel filter=0.000000e+000 result=40 05:03:51 Config A/D Result=40 05:03:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:51 Get A/D filter: -9.255963e+061 result=40 05:03:51 Get A/D value=-858993460 result=40 05:03:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:51 Parameters OK 05:03:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:51 Set A/D data flow result=40 05:03:51 Set A/D channel type result=40 05:03:51 Set A/D encoding result=40 05:03:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:51 Set channel filter=0.000000e+000 result=40 05:03:51 Config A/D Result=40 05:03:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:51 Get A/D filter: -9.255963e+061 result=40 05:03:51 Get A/D value=-858993460 result=40 05:03:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:51 Aux= 05:03:51 Message to Camera, serial 94887 queued 05:04:00 Received message from Master: op=Shutter serial=94897 05:04:00 Shutter LASER close 05:04:00 Received message from Master: op=PointingHead serial=94901 05:04:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:04:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:04:00 Point started: ret=0 05:04:00 point_skyscan result=0 05:04:01 Check angles 05:04:01 SkyScan query 05:04:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.785<-21519 Statuses=0008 0009 05:04:02 Msec=0 True Az=112.995 Ze=-142.785 Az status=0008 Ze status=0009 05:04:02 Check angles 05:04:02 SkyScan query 05:04:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.8<-20120 Statuses=0008 0009 05:04:03 Msec=750 True Az=112.995 Ze=-121.8 Az status=0008 Ze status=0009 05:04:03 Check angles 05:04:03 SkyScan query 05:04:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 05:04:03 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 05:04:03 Check angles 05:04:03 SkyScan query 05:04:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.485<-17299 Statuses=0008 0009 05:04:04 Msec=2250 True Az=112.995 Ze=-79.485 Az status=0008 Ze status=0009 05:04:04 Check angles 05:04:04 SkyScan query 05:04:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.545<-15903 Statuses=0008 0009 05:04:05 Msec=3000 True Az=112.995 Ze=-58.545 Az status=0008 Ze status=0009 05:04:05 Check angles 05:04:05 SkyScan query 05:04:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.59<-14506 Statuses=0008 0009 05:04:06 Msec=3750 True Az=112.995 Ze=-37.59 Az status=0008 Ze status=0009 05:04:06 Check angles 05:04:06 SkyScan query 05:04:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.635<-13109 Statuses=0008 0009 05:04:06 Msec=4500 True Az=112.995 Ze=-16.635 Az status=0008 Ze status=0009 05:04:06 Check angles 05:04:06 SkyScan query 05:04:07 SkyScan query done: ret=0 az=112.995<-7533 ze=4.29<-11714 Statuses=0008 0009 05:04:07 Msec=5250 True Az=112.995 Ze=4.29 Az status=0008 Ze status=0009 05:04:07 Check angles 05:04:07 SkyScan query 05:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:04:08 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:04:08 Message to Master queued w/err=0: serial=94901 error=0 05:04:13 Received message from Master: op=Filter serial=94902 05:04:13 Color wheel filter change from 0 to 0 05:04:13 FLIGetFilterPos err=0 currentPosition=0 05:04:13 FLIGetStepsRemaining err=0 RemainingSteps=0 05:04:13 Filter is already there-color wheel unchanged 05:04:13 Received message from Master: op=Shutter serial=94903 05:04:13 Shutter LASER close 05:04:13 Received message from Camera: op=State serial=94905 05:04:13 GetSingleValue result=40 Value=cccccccc 05:04:13 SkyScan query 05:04:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:04:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:14 Parameters OK 05:04:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:14 Set A/D data flow result=40 05:04:14 Set A/D channel type result=40 05:04:14 Set A/D encoding result=40 05:04:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:14 Set channel filter=0.000000e+000 result=40 05:04:14 Config A/D Result=40 05:04:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:14 Get A/D filter: -9.255963e+061 result=40 05:04:14 Get A/D value=-858993460 result=40 05:04:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:14 Parameters OK 05:04:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:14 Set A/D data flow result=40 05:04:14 Set A/D channel type result=40 05:04:14 Set A/D encoding result=40 05:04:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:14 Set channel filter=0.000000e+000 result=40 05:04:14 Config A/D Result=40 05:04:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:14 Get A/D filter: -9.255963e+061 result=40 05:04:14 Get A/D value=-858993460 result=40 05:04:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:04:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:04:14 Aux= 05:04:14 Message to Camera, serial 94905 queued 05:04:51 Received message from Master: op=PointingHead serial=94918 05:04:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:04:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:04:51 Point started: ret=0 05:04:51 point_skyscan result=0 05:04:52 Check angles 05:04:52 SkyScan query 05:04:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:04:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:04:52 Message to Master queued w/err=0: serial=94918 error=0 05:04:57 Received message from Master: op=Filter serial=94919 05:04:57 Color wheel filter change from 0 to 0 05:04:57 FLIGetFilterPos err=0 currentPosition=0 05:04:57 FLIGetStepsRemaining err=0 RemainingSteps=0 05:04:57 Filter is already there-color wheel unchanged 05:04:57 Received message from Master: op=Shutter serial=94920 05:04:57 Shutter LASER close 05:04:57 Received message from Camera: op=State serial=94922 05:04:57 GetSingleValue result=40 Value=cccccccc 05:04:57 SkyScan query 05:04:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:04:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:58 Parameters OK 05:04:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:58 Set A/D data flow result=40 05:04:58 Set A/D channel type result=40 05:04:58 Set A/D encoding result=40 05:04:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:58 Set channel filter=0.000000e+000 result=40 05:04:58 Config A/D Result=40 05:04:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:58 Get A/D filter: -9.255963e+061 result=40 05:04:58 Get A/D value=-858993460 result=40 05:04:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:58 Parameters OK 05:04:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:58 Set A/D data flow result=40 05:04:58 Set A/D channel type result=40 05:04:58 Set A/D encoding result=40 05:04:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:58 Set channel filter=0.000000e+000 result=40 05:04:58 Config A/D Result=40 05:04:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:58 Get A/D filter: -9.255963e+061 result=40 05:04:58 Get A/D value=-858993460 result=40 05:04:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:04:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:04:58 Aux= 05:04:58 Message to Camera, serial 94922 queued 05:05:35 Received message from Master: op=PointingHead serial=94935 05:05:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:05:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:05:35 Point started: ret=0 05:05:35 point_skyscan result=0 05:05:36 Check angles 05:05:36 SkyScan query 05:05:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:05:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:05:37 Message to Master queued w/err=0: serial=94935 error=0 05:05:42 Received message from Master: op=Filter serial=94936 05:05:42 Color wheel filter change from 0 to 0 05:05:42 FLIGetFilterPos err=0 currentPosition=0 05:05:42 FLIGetStepsRemaining err=0 RemainingSteps=0 05:05:42 Filter is already there-color wheel unchanged 05:05:42 Received message from Master: op=Shutter serial=94937 05:05:42 Shutter LASER close 05:05:42 Received message from Camera: op=State serial=94939 05:05:42 GetSingleValue result=40 Value=cccccccc 05:05:42 SkyScan query 05:05:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:05:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:42 Parameters OK 05:05:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:42 Set A/D data flow result=40 05:05:42 Set A/D channel type result=40 05:05:42 Set A/D encoding result=40 05:05:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:42 Set channel filter=0.000000e+000 result=40 05:05:42 Config A/D Result=40 05:05:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:42 Get A/D filter: -9.255963e+061 result=40 05:05:42 Get A/D value=-858993460 result=40 05:05:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:42 Parameters OK 05:05:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:42 Set A/D data flow result=40 05:05:42 Set A/D channel type result=40 05:05:42 Set A/D encoding result=40 05:05:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:42 Set channel filter=0.000000e+000 result=40 05:05:42 Config A/D Result=40 05:05:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:42 Get A/D filter: -9.255963e+061 result=40 05:05:42 Get A/D value=-858993460 result=40 05:05:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:05:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:05:42 Aux= 05:05:42 Message to Camera, serial 94939 queued 05:06:19 Received message from Master: op=PointingHead serial=94952 05:06:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:06:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:06:20 Point started: ret=0 05:06:20 point_skyscan result=0 05:06:20 Check angles 05:06:20 SkyScan query 05:06:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:06:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:06:21 Message to Master queued w/err=0: serial=94952 error=0 05:06:26 Received message from Master: op=Filter serial=94953 05:06:26 Color wheel filter change from 0 to 0 05:06:26 FLIGetFilterPos err=0 currentPosition=0 05:06:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:06:26 Filter is already there-color wheel unchanged 05:06:26 Received message from Master: op=Shutter serial=94954 05:06:26 Shutter LASER close 05:06:26 Received message from Camera: op=State serial=94956 05:06:26 GetSingleValue result=40 Value=cccccccc 05:06:26 SkyScan query 05:06:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:06:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:27 Parameters OK 05:06:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:27 Set A/D data flow result=40 05:06:27 Set A/D channel type result=40 05:06:27 Set A/D encoding result=40 05:06:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:27 Set channel filter=0.000000e+000 result=40 05:06:27 Config A/D Result=40 05:06:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:27 Get A/D filter: -9.255963e+061 result=40 05:06:27 Get A/D value=-858993460 result=40 05:06:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:27 Parameters OK 05:06:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:27 Set A/D data flow result=40 05:06:27 Set A/D channel type result=40 05:06:27 Set A/D encoding result=40 05:06:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:27 Set channel filter=0.000000e+000 result=40 05:06:27 Config A/D Result=40 05:06:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:27 Get A/D filter: -9.255963e+061 result=40 05:06:27 Get A/D value=-858993460 result=40 05:06:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:06:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:06:27 Aux= 05:06:27 Message to Camera, serial 94956 queued 05:07:04 Received message from Master: op=PointingHead serial=94969 05:07:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:07:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:07:04 Point started: ret=0 05:07:04 point_skyscan result=0 05:07:05 Check angles 05:07:05 SkyScan query 05:07:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 05:07:05 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 05:07:05 Check angles 05:07:05 SkyScan query 05:07:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 05:07:06 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 05:07:06 Check angles 05:07:06 SkyScan query 05:07:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.055<-16337 Statuses=0008 0009 05:07:07 Msec=1500 True Az=112.995 Ze=-65.055 Az status=0008 Ze status=0009 05:07:07 Check angles 05:07:07 SkyScan query 05:07:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.04<-17736 Statuses=0008 0009 05:07:07 Msec=2250 True Az=112.995 Ze=-86.04 Az status=0008 Ze status=0009 05:07:08 Check angles 05:07:08 SkyScan query 05:07:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.965<-19131 Statuses=0008 0009 05:07:08 Msec=3000 True Az=112.995 Ze=-106.965 Az status=0008 Ze status=0009 05:07:08 Check angles 05:07:08 SkyScan query 05:07:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.935<-20529 Statuses=0008 0009 05:07:09 Msec=3750 True Az=112.995 Ze=-127.935 Az status=0008 Ze status=0009 05:07:09 Check angles 05:07:09 SkyScan query 05:07:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.875<-21925 Statuses=0008 0009 05:07:10 Msec=4500 True Az=112.995 Ze=-148.875 Az status=0008 Ze status=0009 05:07:10 Check angles 05:07:10 SkyScan query 05:07:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.815<-23321 Statuses=0008 0009 05:07:10 Msec=5250 True Az=112.995 Ze=-169.815 Az status=0008 Ze status=0009 05:07:11 Check angles 05:07:11 SkyScan query 05:07:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:07:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:07:11 Message to Master queued w/err=0: serial=94969 error=0 05:07:16 Received message from Master: op=Filter serial=94970 05:07:16 Color wheel filter change from 0 to 0 05:07:16 FLIGetFilterPos err=0 currentPosition=0 05:07:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:07:16 Filter is already there-color wheel unchanged 05:07:16 Received message from Master: op=Shutter serial=94971 05:07:16 Shutter LASER open 05:07:17 Received message from Camera: op=State serial=94973 05:07:17 GetSingleValue result=40 Value=cccccccc 05:07:17 SkyScan query 05:07:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:07:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:17 Parameters OK 05:07:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:17 Set A/D data flow result=40 05:07:17 Set A/D channel type result=40 05:07:17 Set A/D encoding result=40 05:07:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:17 Set channel filter=0.000000e+000 result=40 05:07:17 Config A/D Result=40 05:07:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:17 Get A/D filter: -9.255963e+061 result=40 05:07:17 Get A/D value=-858993460 result=40 05:07:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:17 Parameters OK 05:07:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:17 Set A/D data flow result=40 05:07:17 Set A/D channel type result=40 05:07:17 Set A/D encoding result=40 05:07:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:17 Set channel filter=0.000000e+000 result=40 05:07:17 Config A/D Result=40 05:07:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:17 Get A/D filter: -9.255963e+061 result=40 05:07:17 Get A/D value=-858993460 result=40 05:07:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:17 Aux= 05:07:17 Message to Camera, serial 94973 queued 05:07:26 Received message from Master: op=Shutter serial=94983 05:07:26 Shutter LASER close 05:07:26 Received message from Master: op=PointingHead serial=94987 05:07:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:07:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:07:26 Point started: ret=0 05:07:26 point_skyscan result=0 05:07:27 Check angles 05:07:27 SkyScan query 05:07:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 05:07:28 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 05:07:28 Check angles 05:07:28 SkyScan query 05:07:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 05:07:29 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 05:07:29 Check angles 05:07:29 SkyScan query 05:07:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.085<-18739 Statuses=0008 0009 05:07:29 Msec=1500 True Az=112.995 Ze=-101.085 Az status=0008 Ze status=0009 05:07:29 Check angles 05:07:29 SkyScan query 05:07:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 05:07:30 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 05:07:30 Check angles 05:07:30 SkyScan query 05:07:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 05:07:31 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 05:07:31 Check angles 05:07:31 SkyScan query 05:07:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.19<-14546 Statuses=0008 0009 05:07:32 Msec=3750 True Az=112.995 Ze=-38.19 Az status=0008 Ze status=0009 05:07:32 Check angles 05:07:32 SkyScan query 05:07:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.845<-13123 Statuses=0008 0009 05:07:32 Msec=4500 True Az=112.995 Ze=-16.845 Az status=0008 Ze status=0009 05:07:32 Check angles 05:07:32 SkyScan query 05:07:33 SkyScan query done: ret=0 az=112.995<-7533 ze=4.11<-11726 Statuses=0008 0009 05:07:33 Msec=5250 True Az=112.995 Ze=4.11 Az status=0008 Ze status=0009 05:07:33 Check angles 05:07:33 SkyScan query 05:07:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:07:34 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:07:34 Message to Master queued w/err=0: serial=94987 error=0 05:07:39 Received message from Master: op=Filter serial=94988 05:07:39 Color wheel filter change from 0 to 0 05:07:39 FLIGetFilterPos err=0 currentPosition=0 05:07:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:07:39 Filter is already there-color wheel unchanged 05:07:39 Received message from Master: op=Shutter serial=94989 05:07:39 Shutter LASER close 05:07:39 Received message from Camera: op=State serial=94991 05:07:39 GetSingleValue result=40 Value=cccccccc 05:07:39 SkyScan query 05:07:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:07:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:40 Parameters OK 05:07:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:40 Set A/D data flow result=40 05:07:40 Set A/D channel type result=40 05:07:40 Set A/D encoding result=40 05:07:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:40 Set channel filter=0.000000e+000 result=40 05:07:40 Config A/D Result=40 05:07:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:40 Get A/D filter: -9.255963e+061 result=40 05:07:40 Get A/D value=-858993460 result=40 05:07:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:40 Parameters OK 05:07:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:40 Set A/D data flow result=40 05:07:40 Set A/D channel type result=40 05:07:40 Set A/D encoding result=40 05:07:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:40 Set channel filter=0.000000e+000 result=40 05:07:40 Config A/D Result=40 05:07:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:40 Get A/D filter: -9.255963e+061 result=40 05:07:40 Get A/D value=-858993460 result=40 05:07:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:40 Aux= 05:07:40 Message to Camera, serial 94991 queued 05:08:17 Received message from Master: op=PointingHead serial=95004 05:08:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:08:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:08:17 Point started: ret=0 05:08:17 point_skyscan result=0 05:08:18 Check angles 05:08:18 SkyScan query 05:08:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:08:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:08:18 Message to Master queued w/err=0: serial=95004 error=0 05:08:23 Received message from Master: op=Filter serial=95005 05:08:23 Color wheel filter change from 0 to 0 05:08:23 FLIGetFilterPos err=0 currentPosition=0 05:08:23 FLIGetStepsRemaining err=0 RemainingSteps=0 05:08:23 Filter is already there-color wheel unchanged 05:08:23 Received message from Master: op=Shutter serial=95006 05:08:23 Shutter LASER close 05:08:23 Received message from Camera: op=State serial=95008 05:08:23 GetSingleValue result=40 Value=cccccccc 05:08:23 SkyScan query 05:08:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:08:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:24 Parameters OK 05:08:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:24 Set A/D data flow result=40 05:08:24 Set A/D channel type result=40 05:08:24 Set A/D encoding result=40 05:08:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:24 Set channel filter=0.000000e+000 result=40 05:08:24 Config A/D Result=40 05:08:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:24 Get A/D filter: -9.255963e+061 result=40 05:08:24 Get A/D value=-858993460 result=40 05:08:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:24 Parameters OK 05:08:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:24 Set A/D data flow result=40 05:08:24 Set A/D channel type result=40 05:08:24 Set A/D encoding result=40 05:08:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:24 Set channel filter=0.000000e+000 result=40 05:08:24 Config A/D Result=40 05:08:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:24 Get A/D filter: -9.255963e+061 result=40 05:08:24 Get A/D value=-858993460 result=40 05:08:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:08:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:08:24 Aux= 05:08:24 Message to Camera, serial 95008 queued 05:09:01 Received message from Master: op=PointingHead serial=95021 05:09:01 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:09:01 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:09:01 Point started: ret=0 05:09:01 point_skyscan result=0 05:09:02 Check angles 05:09:02 SkyScan query 05:09:03 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 05:09:03 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 05:09:03 Check angles 05:09:03 SkyScan query 05:09:03 SkyScan query done: ret=0 az=154.14<-10276 ze=-6.495<-12433 Statuses=0009 0008 05:09:03 Msec=750 True Az=154.14 Ze=-6.495 Az status=0009 Ze status=0008 05:09:03 Check angles 05:09:03 SkyScan query 05:09:04 SkyScan query done: ret=0 az=171.57<-11438 ze=-6.495<-12433 Statuses=0009 0008 05:09:04 Msec=1500 True Az=171.57 Ze=-6.495 Az status=0009 Ze status=0008 05:09:04 Check angles 05:09:04 SkyScan query 05:09:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:09:05 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:09:05 Message to Master queued w/err=0: serial=95021 error=0 05:09:10 Received message from Master: op=Filter serial=95022 05:09:10 Color wheel filter change from 0 to 0 05:09:10 FLIGetFilterPos err=0 currentPosition=0 05:09:10 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:10 Filter is already there-color wheel unchanged 05:09:10 Received message from Master: op=Shutter serial=95023 05:09:10 Shutter LASER close 05:09:10 Received message from Camera: op=State serial=95025 05:09:10 GetSingleValue result=40 Value=cccccccc 05:09:10 SkyScan query 05:09:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:09:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:11 Parameters OK 05:09:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:11 Set A/D data flow result=40 05:09:11 Set A/D channel type result=40 05:09:11 Set A/D encoding result=40 05:09:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:11 Set channel filter=0.000000e+000 result=40 05:09:11 Config A/D Result=40 05:09:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:11 Get A/D filter: -9.255963e+061 result=40 05:09:11 Get A/D value=-858993460 result=40 05:09:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:11 Parameters OK 05:09:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:11 Set A/D data flow result=40 05:09:11 Set A/D channel type result=40 05:09:11 Set A/D encoding result=40 05:09:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:11 Set channel filter=0.000000e+000 result=40 05:09:11 Config A/D Result=40 05:09:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:11 Get A/D filter: -9.255963e+061 result=40 05:09:11 Get A/D value=-858993460 result=40 05:09:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:11 Aux= 05:09:11 Message to Camera, serial 95025 queued 05:09:47 Received message from Master: op=PointingHead serial=95038 05:09:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:09:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:09:48 Point started: ret=0 05:09:48 point_skyscan result=0 05:09:49 Check angles 05:09:49 SkyScan query 05:09:49 SkyScan query done: ret=0 az=152.64<-10176 ze=6.51<-11566 Statuses=0009 0008 05:09:49 Msec=0 True Az=152.64 Ze=6.51 Az status=0009 Ze status=0008 05:09:49 Check angles 05:09:49 SkyScan query 05:09:50 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 05:09:50 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 05:09:50 Check angles 05:09:50 SkyScan query 05:09:51 SkyScan query done: ret=0 az=117.375<-7825 ze=6.495<-11567 Statuses=0009 0008 05:09:51 Msec=1500 True Az=117.375 Ze=6.495 Az status=0009 Ze status=0008 05:09:51 Check angles 05:09:51 SkyScan query 05:09:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:09:51 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:09:51 Message to Master queued w/err=0: serial=95038 error=0 05:09:56 Received message from Master: op=Filter serial=95039 05:09:56 Color wheel filter change from 0 to 0 05:09:56 FLIGetFilterPos err=0 currentPosition=0 05:09:56 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:56 Filter is already there-color wheel unchanged 05:09:57 Received message from Master: op=Shutter serial=95040 05:09:57 Shutter LASER close 05:09:57 Received message from Camera: op=State serial=95042 05:09:57 GetSingleValue result=40 Value=cccccccc 05:09:57 SkyScan query 05:09:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:09:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:57 Parameters OK 05:09:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:57 Set A/D data flow result=40 05:09:57 Set A/D channel type result=40 05:09:57 Set A/D encoding result=40 05:09:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:57 Set channel filter=0.000000e+000 result=40 05:09:57 Config A/D Result=40 05:09:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:57 Get A/D filter: -9.255963e+061 result=40 05:09:57 Get A/D value=-858993460 result=40 05:09:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:57 Parameters OK 05:09:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:57 Set A/D data flow result=40 05:09:57 Set A/D channel type result=40 05:09:57 Set A/D encoding result=40 05:09:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:57 Set channel filter=0.000000e+000 result=40 05:09:57 Config A/D Result=40 05:09:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:57 Get A/D filter: -9.255963e+061 result=40 05:09:57 Get A/D value=-858993460 result=40 05:09:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:57 Aux= 05:09:57 Message to Camera, serial 95042 queued 05:10:33 Received message from Master: op=PointingHead serial=95054 05:10:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:10:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:10:33 Point started: ret=0 05:10:33 point_skyscan result=0 05:10:34 Check angles 05:10:34 SkyScan query 05:10:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 05:10:35 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 05:10:35 Check angles 05:10:35 SkyScan query 05:10:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 05:10:35 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 05:10:36 Check angles 05:10:36 SkyScan query 05:10:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.715<-16381 Statuses=0008 0009 05:10:36 Msec=1500 True Az=112.995 Ze=-65.715 Az status=0008 Ze status=0009 05:10:36 Check angles 05:10:36 SkyScan query 05:10:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.64<-17776 Statuses=0008 0009 05:10:37 Msec=2250 True Az=112.995 Ze=-86.64 Az status=0008 Ze status=0009 05:10:37 Check angles 05:10:37 SkyScan query 05:10:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 05:10:38 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 05:10:38 Check angles 05:10:38 SkyScan query 05:10:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.985<-20599 Statuses=0008 0009 05:10:39 Msec=3750 True Az=112.995 Ze=-128.985 Az status=0008 Ze status=0009 05:10:39 Check angles 05:10:39 SkyScan query 05:10:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.405<-22027 Statuses=0008 0009 05:10:39 Msec=4500 True Az=112.995 Ze=-150.405 Az status=0008 Ze status=0009 05:10:39 Check angles 05:10:39 SkyScan query 05:10:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.165<-23411 Statuses=0008 0009 05:10:40 Msec=5250 True Az=112.995 Ze=-171.165 Az status=0008 Ze status=0009 05:10:40 Check angles 05:10:40 SkyScan query 05:10:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:10:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:10:41 Message to Master queued w/err=0: serial=95054 error=0 05:10:46 Received message from Master: op=Filter serial=95055 05:10:46 Color wheel filter change from 0 to 0 05:10:46 FLIGetFilterPos err=0 currentPosition=0 05:10:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:10:46 Filter is already there-color wheel unchanged 05:10:46 Received message from Master: op=Shutter serial=95056 05:10:46 Shutter LASER open 05:10:46 Received message from Camera: op=State serial=95058 05:10:46 GetSingleValue result=40 Value=cccccccc 05:10:46 SkyScan query 05:10:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:10:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:47 Parameters OK 05:10:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:47 Set A/D data flow result=40 05:10:47 Set A/D channel type result=40 05:10:47 Set A/D encoding result=40 05:10:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:47 Set channel filter=0.000000e+000 result=40 05:10:47 Config A/D Result=40 05:10:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:47 Get A/D filter: -9.255963e+061 result=40 05:10:47 Get A/D value=-858993460 result=40 05:10:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:47 Parameters OK 05:10:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:47 Set A/D data flow result=40 05:10:47 Set A/D channel type result=40 05:10:47 Set A/D encoding result=40 05:10:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:47 Set channel filter=0.000000e+000 result=40 05:10:47 Config A/D Result=40 05:10:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:47 Get A/D filter: -9.255963e+061 result=40 05:10:47 Get A/D value=-858993460 result=40 05:10:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:10:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:10:47 Aux= 05:10:47 Message to Camera, serial 95058 queued 05:10:54 Received message from Master: op=Shutter serial=95067 05:10:54 Shutter LASER close 05:10:55 Received message from Master: op=PointingHead serial=95071 05:10:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:10:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:10:55 Point started: ret=0 05:10:55 point_skyscan result=0 05:10:56 Check angles 05:10:56 SkyScan query 05:10:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 05:10:56 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 05:10:56 Check angles 05:10:56 SkyScan query 05:10:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.475<-20165 Statuses=0008 0009 05:10:57 Msec=750 True Az=112.995 Ze=-122.475 Az status=0008 Ze status=0009 05:10:57 Check angles 05:10:57 SkyScan query 05:10:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.49<-18766 Statuses=0008 0009 05:10:58 Msec=1500 True Az=112.995 Ze=-101.49 Az status=0008 Ze status=0009 05:10:58 Check angles 05:10:58 SkyScan query 05:10:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.52<-17368 Statuses=0008 0009 05:10:59 Msec=2250 True Az=112.995 Ze=-80.52 Az status=0008 Ze status=0009 05:10:59 Check angles 05:10:59 SkyScan query 05:10:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.16<-15944 Statuses=0008 0009 05:10:59 Msec=3000 True Az=112.995 Ze=-59.16 Az status=0008 Ze status=0009 05:10:59 Check angles 05:10:59 SkyScan query 05:11:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.175<-14545 Statuses=0008 0009 05:11:00 Msec=3750 True Az=112.995 Ze=-38.175 Az status=0008 Ze status=0009 05:11:00 Check angles 05:11:00 SkyScan query 05:11:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.235<-13149 Statuses=0008 0009 05:11:01 Msec=4500 True Az=112.995 Ze=-17.235 Az status=0008 Ze status=0009 05:11:01 Check angles 05:11:01 SkyScan query 05:11:02 SkyScan query done: ret=0 az=112.995<-7533 ze=3.735<-11751 Statuses=0008 0009 05:11:02 Msec=5250 True Az=112.995 Ze=3.735 Az status=0008 Ze status=0009 05:11:02 Check angles 05:11:02 SkyScan query 05:11:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:11:02 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:11:02 Message to Master queued w/err=0: serial=95071 error=0 05:11:07 Received message from Master: op=Filter serial=95072 05:11:07 Color wheel filter change from 0 to 0 05:11:07 FLIGetFilterPos err=0 currentPosition=0 05:11:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:11:07 Filter is already there-color wheel unchanged 05:11:07 Received message from Master: op=Shutter serial=95073 05:11:07 Shutter LASER close 05:11:08 Received message from Camera: op=State serial=95075 05:11:08 GetSingleValue result=40 Value=cccccccc 05:11:08 SkyScan query 05:11:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:11:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:08 Parameters OK 05:11:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:08 Set A/D data flow result=40 05:11:08 Set A/D channel type result=40 05:11:08 Set A/D encoding result=40 05:11:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:08 Set channel filter=0.000000e+000 result=40 05:11:08 Config A/D Result=40 05:11:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:08 Get A/D filter: -9.255963e+061 result=40 05:11:08 Get A/D value=-858993460 result=40 05:11:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:08 Parameters OK 05:11:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:08 Set A/D data flow result=40 05:11:08 Set A/D channel type result=40 05:11:08 Set A/D encoding result=40 05:11:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:08 Set channel filter=0.000000e+000 result=40 05:11:08 Config A/D Result=40 05:11:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:08 Get A/D filter: -9.255963e+061 result=40 05:11:08 Get A/D value=-858993460 result=40 05:11:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:11:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:11:08 Aux= 05:11:08 Message to Camera, serial 95075 queued 05:11:45 Received message from Master: op=PointingHead serial=95088 05:11:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:11:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:11:45 Point started: ret=0 05:11:45 point_skyscan result=0 05:11:46 Check angles 05:11:46 SkyScan query 05:11:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:11:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:11:47 Message to Master queued w/err=0: serial=95088 error=0 05:11:52 Received message from Master: op=Filter serial=95089 05:11:52 Color wheel filter change from 0 to 0 05:11:52 FLIGetFilterPos err=0 currentPosition=0 05:11:52 FLIGetStepsRemaining err=0 RemainingSteps=0 05:11:52 Filter is already there-color wheel unchanged 05:11:52 Received message from Master: op=Shutter serial=95090 05:11:52 Shutter LASER close 05:11:52 Received message from Camera: op=State serial=95092 05:11:52 GetSingleValue result=40 Value=cccccccc 05:11:52 SkyScan query 05:11:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:11:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:53 Parameters OK 05:11:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:53 Set A/D data flow result=40 05:11:53 Set A/D channel type result=40 05:11:53 Set A/D encoding result=40 05:11:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:53 Set channel filter=0.000000e+000 result=40 05:11:53 Config A/D Result=40 05:11:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:53 Get A/D filter: -9.255963e+061 result=40 05:11:53 Get A/D value=-858993460 result=40 05:11:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:53 Parameters OK 05:11:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:53 Set A/D data flow result=40 05:11:53 Set A/D channel type result=40 05:11:53 Set A/D encoding result=40 05:11:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:53 Set channel filter=0.000000e+000 result=40 05:11:53 Config A/D Result=40 05:11:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:53 Get A/D filter: -9.255963e+061 result=40 05:11:53 Get A/D value=-858993460 result=40 05:11:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:11:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:11:53 Aux= 05:11:53 Message to Camera, serial 95092 queued 05:12:29 Received message from Master: op=PointingHead serial=95105 05:12:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:12:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:12:30 Point started: ret=0 05:12:30 point_skyscan result=0 05:12:30 Check angles 05:12:30 SkyScan query 05:12:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:12:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:12:31 Message to Master queued w/err=0: serial=95105 error=0 05:12:36 Received message from Master: op=Filter serial=95106 05:12:36 Color wheel filter change from 0 to 0 05:12:36 FLIGetFilterPos err=0 currentPosition=0 05:12:36 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:36 Filter is already there-color wheel unchanged 05:12:36 Received message from Master: op=Shutter serial=95107 05:12:36 Shutter LASER close 05:12:36 Received message from Camera: op=State serial=95109 05:12:36 GetSingleValue result=40 Value=cccccccc 05:12:36 SkyScan query 05:12:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:12:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:37 Parameters OK 05:12:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:37 Set A/D data flow result=40 05:12:37 Set A/D channel type result=40 05:12:37 Set A/D encoding result=40 05:12:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:37 Set channel filter=0.000000e+000 result=40 05:12:37 Config A/D Result=40 05:12:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:37 Get A/D filter: -9.255963e+061 result=40 05:12:37 Get A/D value=-858993460 result=40 05:12:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:37 Parameters OK 05:12:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:37 Set A/D data flow result=40 05:12:37 Set A/D channel type result=40 05:12:37 Set A/D encoding result=40 05:12:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:37 Set channel filter=0.000000e+000 result=40 05:12:37 Config A/D Result=40 05:12:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:37 Get A/D filter: -9.255963e+061 result=40 05:12:37 Get A/D value=-858993460 result=40 05:12:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:37 Aux= 05:12:37 Message to Camera, serial 95109 queued 05:13:14 Received message from Master: op=PointingHead serial=95122 05:13:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:13:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:13:14 Point started: ret=0 05:13:14 point_skyscan result=0 05:13:15 Check angles 05:13:15 SkyScan query 05:13:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:13:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:13:15 Message to Master queued w/err=0: serial=95122 error=0 05:13:20 Received message from Master: op=Filter serial=95123 05:13:20 Color wheel filter change from 0 to 0 05:13:20 FLIGetFilterPos err=0 currentPosition=0 05:13:20 FLIGetStepsRemaining err=0 RemainingSteps=0 05:13:20 Filter is already there-color wheel unchanged 05:13:20 Received message from Master: op=Shutter serial=95124 05:13:20 Shutter LASER close 05:13:21 Received message from Camera: op=State serial=95126 05:13:21 GetSingleValue result=40 Value=cccccccc 05:13:21 SkyScan query 05:13:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:13:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:21 Parameters OK 05:13:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:21 Set A/D data flow result=40 05:13:21 Set A/D channel type result=40 05:13:21 Set A/D encoding result=40 05:13:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:21 Set channel filter=0.000000e+000 result=40 05:13:21 Config A/D Result=40 05:13:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:21 Get A/D filter: -9.255963e+061 result=40 05:13:21 Get A/D value=-858993460 result=40 05:13:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:21 Parameters OK 05:13:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:21 Set A/D data flow result=40 05:13:21 Set A/D channel type result=40 05:13:21 Set A/D encoding result=40 05:13:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:21 Set channel filter=0.000000e+000 result=40 05:13:21 Config A/D Result=40 05:13:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:21 Get A/D filter: -9.255963e+061 result=40 05:13:21 Get A/D value=-858993460 result=40 05:13:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:13:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:13:21 Aux= 05:13:21 Message to Camera, serial 95126 queued 05:13:58 Received message from Master: op=PointingHead serial=95139 05:13:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:13:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:13:58 Point started: ret=0 05:13:58 point_skyscan result=0 05:13:59 Check angles 05:13:59 SkyScan query 05:14:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 05:14:00 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 05:14:00 Check angles 05:14:00 SkyScan query 05:14:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.145<-14943 Statuses=0008 0009 05:14:00 Msec=750 True Az=112.995 Ze=-44.145 Az status=0008 Ze status=0009 05:14:01 Check angles 05:14:01 SkyScan query 05:14:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.1<-16340 Statuses=0008 0009 05:14:01 Msec=1500 True Az=112.995 Ze=-65.1 Az status=0008 Ze status=0009 05:14:01 Check angles 05:14:01 SkyScan query 05:14:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 05:14:02 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 05:14:02 Check angles 05:14:02 SkyScan query 05:14:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.445<-19163 Statuses=0008 0009 05:14:03 Msec=3000 True Az=112.995 Ze=-107.445 Az status=0008 Ze status=0009 05:14:03 Check angles 05:14:03 SkyScan query 05:14:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.37<-20558 Statuses=0008 0009 05:14:03 Msec=3750 True Az=112.995 Ze=-128.37 Az status=0008 Ze status=0009 05:14:04 Check angles 05:14:04 SkyScan query 05:14:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.76<-21984 Statuses=0008 0009 05:14:04 Msec=4500 True Az=112.995 Ze=-149.76 Az status=0008 Ze status=0009 05:14:04 Check angles 05:14:04 SkyScan query 05:14:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 05:14:05 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 05:14:05 Check angles 05:14:05 SkyScan query 05:14:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:14:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:14:06 Message to Master queued w/err=0: serial=95139 error=0 05:14:11 Received message from Master: op=Filter serial=95140 05:14:11 Color wheel filter change from 0 to 0 05:14:11 FLIGetFilterPos err=0 currentPosition=0 05:14:11 FLIGetStepsRemaining err=0 RemainingSteps=0 05:14:11 Filter is already there-color wheel unchanged 05:14:11 Received message from Master: op=Shutter serial=95141 05:14:11 Shutter LASER open 05:14:11 Received message from Camera: op=State serial=95143 05:14:11 GetSingleValue result=40 Value=cccccccc 05:14:11 SkyScan query 05:14:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:14:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 [UTC 2019-3-4 05:14:12] 05:14:12 Parameters OK 05:14:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:12 Set A/D data flow result=40 05:14:12 Set A/D channel type result=40 05:14:12 Set A/D encoding result=40 05:14:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:12 Set channel filter=0.000000e+000 result=40 05:14:12 Config A/D Result=40 05:14:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:12 Get A/D filter: -9.255963e+061 result=40 05:14:12 Get A/D value=-858993460 result=40 05:14:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:12 Parameters OK 05:14:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:12 Set A/D data flow result=40 05:14:12 Set A/D channel type result=40 05:14:12 Set A/D encoding result=40 05:14:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:12 Set channel filter=0.000000e+000 result=40 05:14:12 Config A/D Result=40 05:14:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:12 Get A/D filter: -9.255963e+061 result=40 05:14:12 Get A/D value=-858993460 result=40 05:14:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:14:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:14:12 Aux= 05:14:12 Message to Camera, serial 95143 queued 05:14:20 Received message from Master: op=Shutter serial=95153 05:14:20 Shutter LASER close 05:14:21 Received message from Master: op=PointingHead serial=95157 05:14:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:14:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:14:21 Point started: ret=0 05:14:21 point_skyscan result=0 05:14:22 Check angles 05:14:22 SkyScan query 05:14:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 05:14:22 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 05:14:22 Check angles 05:14:22 SkyScan query 05:14:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 05:14:23 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 05:14:23 Check angles 05:14:23 SkyScan query 05:14:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 05:14:24 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 05:14:24 Check angles 05:14:24 SkyScan query 05:14:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.965<-17331 Statuses=0008 0009 05:14:25 Msec=2250 True Az=112.995 Ze=-79.965 Az status=0008 Ze status=0009 05:14:25 Check angles 05:14:25 SkyScan query 05:14:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.575<-15905 Statuses=0008 0009 05:14:25 Msec=3000 True Az=112.995 Ze=-58.575 Az status=0008 Ze status=0009 05:14:25 Check angles 05:14:25 SkyScan query 05:14:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.62<-14508 Statuses=0008 0009 05:14:26 Msec=3750 True Az=112.995 Ze=-37.62 Az status=0008 Ze status=0009 05:14:26 Check angles 05:14:26 SkyScan query 05:14:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.665<-13111 Statuses=0008 0009 05:14:27 Msec=4500 True Az=112.995 Ze=-16.665 Az status=0008 Ze status=0009 05:14:27 Check angles 05:14:27 SkyScan query 05:14:28 SkyScan query done: ret=0 az=112.995<-7533 ze=4.26<-11716 Statuses=0008 0009 05:14:28 Msec=5250 True Az=112.995 Ze=4.26 Az status=0008 Ze status=0009 05:14:28 Check angles 05:14:28 SkyScan query 05:14:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:14:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:14:28 Message to Master queued w/err=0: serial=95157 error=0 05:14:33 Received message from Master: op=Filter serial=95158 05:14:33 Color wheel filter change from 0 to 0 05:14:33 FLIGetFilterPos err=0 currentPosition=0 05:14:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:14:33 Filter is already there-color wheel unchanged 05:14:34 Received message from Master: op=Shutter serial=95159 05:14:34 Shutter LASER close 05:14:34 Received message from Camera: op=State serial=95161 05:14:34 GetSingleValue result=40 Value=cccccccc 05:14:34 SkyScan query 05:14:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:14:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:34 Parameters OK 05:14:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:34 Set A/D data flow result=40 05:14:34 Set A/D channel type result=40 05:14:34 Set A/D encoding result=40 05:14:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:34 Set channel filter=0.000000e+000 result=40 05:14:34 Config A/D Result=40 05:14:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:34 Get A/D filter: -9.255963e+061 result=40 05:14:34 Get A/D value=-858993460 result=40 05:14:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:34 Parameters OK 05:14:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:34 Set A/D data flow result=40 05:14:34 Set A/D channel type result=40 05:14:34 Set A/D encoding result=40 05:14:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:34 Set channel filter=0.000000e+000 result=40 05:14:34 Config A/D Result=40 05:14:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:34 Get A/D filter: -9.255963e+061 result=40 05:14:34 Get A/D value=-858993460 result=40 05:14:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:14:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:14:34 Aux= 05:14:34 Message to Camera, serial 95161 queued 05:15:11 Received message from Master: op=PointingHead serial=95174 05:15:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:15:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:15:11 Point started: ret=0 05:15:11 point_skyscan result=0 05:15:12 Check angles 05:15:12 SkyScan query 05:15:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:15:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:15:13 Message to Master queued w/err=0: serial=95174 error=0 05:15:18 Received message from Master: op=Filter serial=95175 05:15:18 Color wheel filter change from 0 to 0 05:15:18 FLIGetFilterPos err=0 currentPosition=0 05:15:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:15:18 Filter is already there-color wheel unchanged 05:15:18 Received message from Master: op=Shutter serial=95176 05:15:18 Shutter LASER close 05:15:18 Received message from Camera: op=State serial=95178 05:15:18 GetSingleValue result=40 Value=cccccccc 05:15:18 SkyScan query 05:15:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:15:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:19 Parameters OK 05:15:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:19 Set A/D data flow result=40 05:15:19 Set A/D channel type result=40 05:15:19 Set A/D encoding result=40 05:15:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:19 Set channel filter=0.000000e+000 result=40 05:15:19 Config A/D Result=40 05:15:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:19 Get A/D filter: -9.255963e+061 result=40 05:15:19 Get A/D value=-858993460 result=40 05:15:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:19 Parameters OK 05:15:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:19 Set A/D data flow result=40 05:15:19 Set A/D channel type result=40 05:15:19 Set A/D encoding result=40 05:15:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:19 Set channel filter=0.000000e+000 result=40 05:15:19 Config A/D Result=40 05:15:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:19 Get A/D filter: -9.255963e+061 result=40 05:15:19 Get A/D value=-858993460 result=40 05:15:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:15:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:15:19 Aux= 05:15:19 Message to Camera, serial 95178 queued 05:15:55 Received message from Master: op=PointingHead serial=95191 05:15:55 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:15:55 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:15:56 Point started: ret=0 05:15:56 point_skyscan result=0 05:15:57 Check angles 05:15:57 SkyScan query 05:15:57 SkyScan query done: ret=0 az=135.645<-9043 ze=-6.51<-12434 Statuses=0009 0008 05:15:57 Msec=0 True Az=135.645 Ze=-6.51 Az status=0009 Ze status=0008 05:15:57 Check angles 05:15:57 SkyScan query 05:15:58 SkyScan query done: ret=0 az=153.165<-10211 ze=-6.495<-12433 Statuses=0009 0008 05:15:58 Msec=750 True Az=153.165 Ze=-6.495 Az status=0009 Ze status=0008 05:15:58 Check angles 05:15:58 SkyScan query 05:15:59 SkyScan query done: ret=0 az=170.7<-11380 ze=-6.495<-12433 Statuses=0009 0008 05:15:59 Msec=1500 True Az=170.7 Ze=-6.495 Az status=0009 Ze status=0008 05:15:59 Check angles 05:15:59 SkyScan query 05:15:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:15:59 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:15:59 Message to Master queued w/err=0: serial=95191 error=0 05:16:04 Received message from Master: op=Filter serial=95192 05:16:04 Color wheel filter change from 0 to 0 05:16:04 FLIGetFilterPos err=0 currentPosition=0 05:16:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:04 Filter is already there-color wheel unchanged 05:16:05 Received message from Master: op=Shutter serial=95193 05:16:05 Shutter LASER close 05:16:05 Received message from Camera: op=State serial=95195 05:16:05 GetSingleValue result=40 Value=cccccccc 05:16:05 SkyScan query 05:16:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:16:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:05 Parameters OK 05:16:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:05 Set A/D data flow result=40 05:16:05 Set A/D channel type result=40 05:16:05 Set A/D encoding result=40 05:16:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:05 Set channel filter=0.000000e+000 result=40 05:16:05 Config A/D Result=40 05:16:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:05 Get A/D filter: -9.255963e+061 result=40 05:16:05 Get A/D value=-858993460 result=40 05:16:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:05 Parameters OK 05:16:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:05 Set A/D data flow result=40 05:16:05 Set A/D channel type result=40 05:16:05 Set A/D encoding result=40 05:16:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:05 Set channel filter=0.000000e+000 result=40 05:16:05 Config A/D Result=40 05:16:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:05 Get A/D filter: -9.255963e+061 result=40 05:16:05 Get A/D value=-858993460 result=40 05:16:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:05 Aux= 05:16:05 Message to Camera, serial 95195 queued 05:16:42 Received message from Master: op=PointingHead serial=95208 05:16:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:16:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:16:42 Point started: ret=0 05:16:42 point_skyscan result=0 05:16:43 Check angles 05:16:43 SkyScan query 05:16:44 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 05:16:44 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 05:16:44 Check angles 05:16:44 SkyScan query 05:16:44 SkyScan query done: ret=0 az=135.36<-9024 ze=6.495<-11567 Statuses=0009 0008 05:16:44 Msec=750 True Az=135.36 Ze=6.495 Az status=0009 Ze status=0008 05:16:45 Check angles 05:16:45 SkyScan query 05:16:45 SkyScan query done: ret=0 az=117.645<-7843 ze=6.495<-11567 Statuses=0009 0008 05:16:45 Msec=1500 True Az=117.645 Ze=6.495 Az status=0009 Ze status=0008 05:16:45 Check angles 05:16:45 SkyScan query 05:16:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:16:46 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:16:46 Message to Master queued w/err=0: serial=95208 error=0 05:16:51 Received message from Master: op=Filter serial=95209 05:16:51 Color wheel filter change from 0 to 0 05:16:51 FLIGetFilterPos err=0 currentPosition=0 05:16:51 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:51 Filter is already there-color wheel unchanged 05:16:51 Received message from Master: op=Shutter serial=95210 05:16:51 Shutter LASER close 05:16:51 Received message from Camera: op=State serial=95212 05:16:51 GetSingleValue result=40 Value=cccccccc 05:16:51 SkyScan query 05:16:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:16:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:52 Parameters OK 05:16:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:52 Set A/D data flow result=40 05:16:52 Set A/D channel type result=40 05:16:52 Set A/D encoding result=40 05:16:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:52 Set channel filter=0.000000e+000 result=40 05:16:52 Config A/D Result=40 05:16:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:52 Get A/D filter: -9.255963e+061 result=40 05:16:52 Get A/D value=-858993460 result=40 05:16:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:52 Parameters OK 05:16:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:52 Set A/D data flow result=40 05:16:52 Set A/D channel type result=40 05:16:52 Set A/D encoding result=40 05:16:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:52 Set channel filter=0.000000e+000 result=40 05:16:52 Config A/D Result=40 05:16:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:52 Get A/D filter: -9.255963e+061 result=40 05:16:52 Get A/D value=-858993460 result=40 05:16:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:52 Aux= 05:16:52 Message to Camera, serial 95212 queued 05:17:28 Received message from Master: op=PointingHead serial=95224 05:17:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:17:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:17:28 Point started: ret=0 05:17:28 point_skyscan result=0 05:17:29 Check angles 05:17:29 SkyScan query 05:17:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 05:17:29 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 05:17:29 Check angles 05:17:29 SkyScan query 05:17:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.06<-15004 Statuses=0008 0009 05:17:30 Msec=750 True Az=112.995 Ze=-45.06 Az status=0008 Ze status=0009 05:17:30 Check angles 05:17:30 SkyScan query 05:17:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.03<-16402 Statuses=0008 0009 05:17:31 Msec=1500 True Az=112.995 Ze=-66.03 Az status=0008 Ze status=0009 05:17:31 Check angles 05:17:31 SkyScan query 05:17:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.42<-17828 Statuses=0008 0009 05:17:31 Msec=2250 True Az=112.995 Ze=-87.42 Az status=0008 Ze status=0009 05:17:32 Check angles 05:17:32 SkyScan query 05:17:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.795<-19253 Statuses=0008 0009 05:17:32 Msec=3000 True Az=112.995 Ze=-108.795 Az status=0008 Ze status=0009 05:17:32 Check angles 05:17:32 SkyScan query 05:17:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-130.2<-20680 Statuses=0008 0009 05:17:33 Msec=3750 True Az=112.995 Ze=-130.2 Az status=0008 Ze status=0009 05:17:33 Check angles 05:17:33 SkyScan query 05:17:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.125<-22075 Statuses=0008 0009 05:17:34 Msec=4500 True Az=112.995 Ze=-151.125 Az status=0008 Ze status=0009 05:17:34 Check angles 05:17:34 SkyScan query 05:17:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.705<-23447 Statuses=0008 0009 05:17:35 Msec=5250 True Az=112.995 Ze=-171.705 Az status=0008 Ze status=0009 05:17:35 Check angles 05:17:35 SkyScan query 05:17:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:17:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:17:35 Message to Master queued w/err=0: serial=95224 error=0 05:17:40 Received message from Master: op=Filter serial=95225 05:17:40 Color wheel filter change from 0 to 0 05:17:40 FLIGetFilterPos err=0 currentPosition=0 05:17:40 FLIGetStepsRemaining err=0 RemainingSteps=0 05:17:40 Filter is already there-color wheel unchanged 05:17:40 Received message from Master: op=Shutter serial=95226 05:17:40 Shutter LASER open 05:17:41 Received message from Camera: op=State serial=95228 05:17:41 GetSingleValue result=40 Value=cccccccc 05:17:41 SkyScan query 05:17:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:17:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:41 Parameters OK 05:17:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:41 Set A/D data flow result=40 05:17:41 Set A/D channel type result=40 05:17:41 Set A/D encoding result=40 05:17:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:41 Set channel filter=0.000000e+000 result=40 05:17:41 Config A/D Result=40 05:17:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:41 Get A/D filter: -9.255963e+061 result=40 05:17:41 Get A/D value=-858993460 result=40 05:17:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:41 Parameters OK 05:17:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:41 Set A/D data flow result=40 05:17:41 Set A/D channel type result=40 05:17:41 Set A/D encoding result=40 05:17:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:41 Set channel filter=0.000000e+000 result=40 05:17:41 Config A/D Result=40 05:17:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:41 Get A/D filter: -9.255963e+061 result=40 05:17:41 Get A/D value=-858993460 result=40 05:17:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:17:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:17:41 Aux= 05:17:41 Message to Camera, serial 95228 queued 05:17:50 Received message from Master: op=Shutter serial=95238 05:17:50 Shutter LASER close 05:17:50 Received message from Master: op=PointingHead serial=95242 05:17:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:17:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:17:50 Point started: ret=0 05:17:50 point_skyscan result=0 05:17:51 Check angles 05:17:51 SkyScan query 05:17:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.52<-21568 Statuses=0008 0009 05:17:52 Msec=0 True Az=112.995 Ze=-143.52 Az status=0008 Ze status=0009 05:17:52 Check angles 05:17:52 SkyScan query 05:17:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 05:17:52 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 05:17:53 Check angles 05:17:53 SkyScan query 05:17:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.175<-18745 Statuses=0008 0009 05:17:53 Msec=1500 True Az=112.995 Ze=-101.175 Az status=0008 Ze status=0009 05:17:53 Check angles 05:17:53 SkyScan query 05:17:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 05:17:54 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 05:17:54 Check angles 05:17:54 SkyScan query 05:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.83<-15922 Statuses=0008 0009 05:17:55 Msec=3000 True Az=112.995 Ze=-58.83 Az status=0008 Ze status=0009 05:17:55 Check angles 05:17:55 SkyScan query 05:17:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.425<-14495 Statuses=0008 0009 05:17:56 Msec=3750 True Az=112.995 Ze=-37.425 Az status=0008 Ze status=0009 05:17:56 Check angles 05:17:56 SkyScan query 05:17:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.47<-13098 Statuses=0008 0009 05:17:56 Msec=4500 True Az=112.995 Ze=-16.47 Az status=0008 Ze status=0009 05:17:56 Check angles 05:17:56 SkyScan query 05:17:57 SkyScan query done: ret=0 az=112.995<-7533 ze=4.41<-11706 Statuses=0008 0009 05:17:57 Msec=5250 True Az=112.995 Ze=4.41 Az status=0008 Ze status=0009 05:17:57 Check angles 05:17:57 SkyScan query 05:17:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:17:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:17:58 Message to Master queued w/err=0: serial=95242 error=0 05:18:03 Received message from Master: op=Filter serial=95243 05:18:03 Color wheel filter change from 0 to 0 05:18:03 FLIGetFilterPos err=0 currentPosition=0 05:18:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:03 Filter is already there-color wheel unchanged 05:18:03 Received message from Master: op=Shutter serial=95244 05:18:03 Shutter LASER close 05:18:03 Received message from Camera: op=State serial=95246 05:18:03 GetSingleValue result=40 Value=cccccccc 05:18:03 SkyScan query 05:18:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:18:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:04 Parameters OK 05:18:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:04 Set A/D data flow result=40 05:18:04 Set A/D channel type result=40 05:18:04 Set A/D encoding result=40 05:18:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:04 Set channel filter=0.000000e+000 result=40 05:18:04 Config A/D Result=40 05:18:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:04 Get A/D filter: -9.255963e+061 result=40 05:18:04 Get A/D value=-858993460 result=40 05:18:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:04 Parameters OK 05:18:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:04 Set A/D data flow result=40 05:18:04 Set A/D channel type result=40 05:18:04 Set A/D encoding result=40 05:18:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:04 Set channel filter=0.000000e+000 result=40 05:18:04 Config A/D Result=40 05:18:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:04 Get A/D filter: -9.255963e+061 result=40 05:18:04 Get A/D value=-858993460 result=40 05:18:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:04 Aux= 05:18:04 Message to Camera, serial 95246 queued 05:18:40 Received message from Master: op=PointingHead serial=95259 05:18:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:18:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:18:41 Point started: ret=0 05:18:41 point_skyscan result=0 05:18:42 Check angles 05:18:42 SkyScan query 05:18:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:18:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:18:42 Message to Master queued w/err=0: serial=95259 error=0 05:18:47 Received message from Master: op=Filter serial=95260 05:18:47 Color wheel filter change from 0 to 0 05:18:47 FLIGetFilterPos err=0 currentPosition=0 05:18:47 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:47 Filter is already there-color wheel unchanged 05:18:47 Received message from Master: op=Shutter serial=95261 05:18:47 Shutter LASER close 05:18:47 Received message from Camera: op=State serial=95263 05:18:47 GetSingleValue result=40 Value=cccccccc 05:18:47 SkyScan query 05:18:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:18:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:48 Parameters OK 05:18:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:48 Set A/D data flow result=40 05:18:48 Set A/D channel type result=40 05:18:48 Set A/D encoding result=40 05:18:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:48 Set channel filter=0.000000e+000 result=40 05:18:48 Config A/D Result=40 05:18:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:48 Get A/D filter: -9.255963e+061 result=40 05:18:48 Get A/D value=-858993460 result=40 05:18:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:48 Parameters OK 05:18:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:48 Set A/D data flow result=40 05:18:48 Set A/D channel type result=40 05:18:48 Set A/D encoding result=40 05:18:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:48 Set channel filter=0.000000e+000 result=40 05:18:48 Config A/D Result=40 05:18:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:48 Get A/D filter: -9.255963e+061 result=40 05:18:48 Get A/D value=-858993460 result=40 05:18:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:48 Aux= 05:18:48 Message to Camera, serial 95263 queued 05:19:25 Received message from Master: op=PointingHead serial=95276 05:19:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:19:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:19:25 Point started: ret=0 05:19:25 point_skyscan result=0 05:19:26 Check angles 05:19:26 SkyScan query 05:19:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:19:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:19:27 Message to Master queued w/err=0: serial=95276 error=0 05:19:32 Received message from Master: op=Filter serial=95277 05:19:32 Color wheel filter change from 0 to 0 05:19:32 FLIGetFilterPos err=0 currentPosition=0 05:19:32 FLIGetStepsRemaining err=0 RemainingSteps=0 05:19:32 Filter is already there-color wheel unchanged 05:19:32 Received message from Master: op=Shutter serial=95278 05:19:32 Shutter LASER close 05:19:32 Received message from Camera: op=State serial=95280 05:19:32 GetSingleValue result=40 Value=cccccccc 05:19:32 SkyScan query 05:19:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:19:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:32 Parameters OK 05:19:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:32 Set A/D data flow result=40 05:19:32 Set A/D channel type result=40 05:19:32 Set A/D encoding result=40 05:19:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:32 Set channel filter=0.000000e+000 result=40 05:19:32 Config A/D Result=40 05:19:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:32 Get A/D filter: -9.255963e+061 result=40 05:19:32 Get A/D value=-858993460 result=40 05:19:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:32 Parameters OK 05:19:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:32 Set A/D data flow result=40 05:19:32 Set A/D channel type result=40 05:19:32 Set A/D encoding result=40 05:19:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:32 Set channel filter=0.000000e+000 result=40 05:19:32 Config A/D Result=40 05:19:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:32 Get A/D filter: -9.255963e+061 result=40 05:19:32 Get A/D value=-858993460 result=40 05:19:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:19:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:19:32 Aux= 05:19:32 Message to Camera, serial 95280 queued 05:20:09 Received message from Master: op=PointingHead serial=95293 05:20:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:20:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:20:10 Point started: ret=0 05:20:10 point_skyscan result=0 05:20:10 Check angles 05:20:10 SkyScan query 05:20:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:20:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:20:11 Message to Master queued w/err=0: serial=95293 error=0 05:20:16 Received message from Master: op=Filter serial=95294 05:20:16 Color wheel filter change from 0 to 0 05:20:16 FLIGetFilterPos err=0 currentPosition=0 05:20:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:20:16 Filter is already there-color wheel unchanged 05:20:16 Received message from Master: op=Shutter serial=95295 05:20:16 Shutter LASER close 05:20:16 Received message from Camera: op=State serial=95297 05:20:16 GetSingleValue result=40 Value=cccccccc 05:20:16 SkyScan query 05:20:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:20:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:17 Parameters OK 05:20:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:17 Set A/D data flow result=40 05:20:17 Set A/D channel type result=40 05:20:17 Set A/D encoding result=40 05:20:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:17 Set channel filter=0.000000e+000 result=40 05:20:17 Config A/D Result=40 05:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:17 Get A/D filter: -9.255963e+061 result=40 05:20:17 Get A/D value=-858993460 result=40 05:20:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:17 Parameters OK 05:20:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:17 Set A/D data flow result=40 05:20:17 Set A/D channel type result=40 05:20:17 Set A/D encoding result=40 05:20:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:17 Set channel filter=0.000000e+000 result=40 05:20:17 Config A/D Result=40 05:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:17 Get A/D filter: -9.255963e+061 result=40 05:20:17 Get A/D value=-858993460 result=40 05:20:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:20:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:20:17 Aux= 05:20:17 Message to Camera, serial 95297 queued 05:20:53 Received message from Master: op=PointingHead serial=95310 05:20:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:20:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:20:54 Point started: ret=0 05:20:54 point_skyscan result=0 05:20:55 Check angles 05:20:55 SkyScan query 05:20:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.79<-13586 Statuses=0008 0009 05:20:55 Msec=0 True Az=112.995 Ze=-23.79 Az status=0008 Ze status=0009 05:20:55 Check angles 05:20:55 SkyScan query 05:20:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 05:20:56 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 05:20:56 Check angles 05:20:56 SkyScan query 05:20:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 05:20:57 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 05:20:57 Check angles 05:20:57 SkyScan query 05:20:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 05:20:57 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 05:20:58 Check angles 05:20:58 SkyScan query 05:20:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.595<-19173 Statuses=0008 0009 05:20:58 Msec=3000 True Az=112.995 Ze=-107.595 Az status=0008 Ze status=0009 05:20:58 Check angles 05:20:58 SkyScan query 05:20:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.505<-20567 Statuses=0008 0009 05:20:59 Msec=3750 True Az=112.995 Ze=-128.505 Az status=0008 Ze status=0009 05:20:59 Check angles 05:20:59 SkyScan query 05:21:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.49<-21966 Statuses=0008 0009 05:21:00 Msec=4500 True Az=112.995 Ze=-149.49 Az status=0008 Ze status=0009 05:21:00 Check angles 05:21:00 SkyScan query 05:21:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.445<-23363 Statuses=0008 0009 05:21:00 Msec=5250 True Az=112.995 Ze=-170.445 Az status=0008 Ze status=0009 05:21:01 Check angles 05:21:01 SkyScan query 05:21:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:21:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:21:01 Message to Master queued w/err=0: serial=95310 error=0 05:21:06 Received message from Master: op=Filter serial=95311 05:21:06 Color wheel filter change from 0 to 0 05:21:06 FLIGetFilterPos err=0 currentPosition=0 05:21:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:21:06 Filter is already there-color wheel unchanged 05:21:06 Received message from Master: op=Shutter serial=95312 05:21:06 Shutter LASER open 05:21:07 Received message from Camera: op=State serial=95314 05:21:07 GetSingleValue result=40 Value=cccccccc 05:21:07 SkyScan query 05:21:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:21:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:07 Parameters OK 05:21:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:07 Set A/D data flow result=40 05:21:07 Set A/D channel type result=40 05:21:07 Set A/D encoding result=40 05:21:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:07 Set channel filter=0.000000e+000 result=40 05:21:07 Config A/D Result=40 05:21:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:07 Get A/D filter: -9.255963e+061 result=40 05:21:07 Get A/D value=-858993460 result=40 05:21:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:07 Parameters OK 05:21:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:07 Set A/D data flow result=40 05:21:07 Set A/D channel type result=40 05:21:07 Set A/D encoding result=40 05:21:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:07 Set channel filter=0.000000e+000 result=40 05:21:07 Config A/D Result=40 05:21:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:07 Get A/D filter: -9.255963e+061 result=40 05:21:07 Get A/D value=-858993460 result=40 05:21:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:21:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:21:07 Aux= 05:21:07 Message to Camera, serial 95314 queued 05:21:16 Received message from Master: op=Shutter serial=95324 05:21:16 Shutter LASER close 05:21:16 Received message from Master: op=PointingHead serial=95328 05:21:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:21:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:21:16 Point started: ret=0 05:21:16 point_skyscan result=0 05:21:17 Check angles 05:21:17 SkyScan query 05:21:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 05:21:18 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 05:21:18 Check angles 05:21:18 SkyScan query 05:21:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 05:21:19 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 05:21:19 Check angles 05:21:19 SkyScan query 05:21:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.28<-18752 Statuses=0008 0009 05:21:19 Msec=1500 True Az=112.995 Ze=-101.28 Az status=0008 Ze status=0009 05:21:19 Check angles 05:21:19 SkyScan query 05:21:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.325<-17355 Statuses=0008 0009 05:21:20 Msec=2250 True Az=112.995 Ze=-80.325 Az status=0008 Ze status=0009 05:21:20 Check angles 05:21:20 SkyScan query 05:21:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.37<-15958 Statuses=0008 0009 05:21:21 Msec=3000 True Az=112.995 Ze=-59.37 Az status=0008 Ze status=0009 05:21:21 Check angles 05:21:21 SkyScan query 05:21:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.4<-14560 Statuses=0008 0009 05:21:22 Msec=3750 True Az=112.995 Ze=-38.4 Az status=0008 Ze status=0009 05:21:22 Check angles 05:21:22 SkyScan query 05:21:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.46<-13164 Statuses=0008 0009 05:21:22 Msec=4500 True Az=112.995 Ze=-17.46 Az status=0008 Ze status=0009 05:21:22 Check angles 05:21:22 SkyScan query 05:21:23 SkyScan query done: ret=0 az=112.995<-7533 ze=3.495<-11767 Statuses=0008 0009 05:21:23 Msec=5250 True Az=112.995 Ze=3.495 Az status=0008 Ze status=0009 05:21:23 Check angles 05:21:23 SkyScan query 05:21:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:21:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:21:24 Message to Master queued w/err=0: serial=95328 error=0 05:21:29 Received message from Master: op=Filter serial=95329 05:21:29 Color wheel filter change from 0 to 0 05:21:29 FLIGetFilterPos err=0 currentPosition=0 05:21:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:21:29 Filter is already there-color wheel unchanged 05:21:29 Received message from Master: op=Shutter serial=95330 05:21:29 Shutter LASER close 05:21:29 Received message from Camera: op=State serial=95332 05:21:29 GetSingleValue result=40 Value=cccccccc 05:21:29 SkyScan query 05:21:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:21:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:30 Parameters OK 05:21:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:30 Set A/D data flow result=40 05:21:30 Set A/D channel type result=40 05:21:30 Set A/D encoding result=40 05:21:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:30 Set channel filter=0.000000e+000 result=40 05:21:30 Config A/D Result=40 05:21:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:30 Get A/D filter: -9.255963e+061 result=40 05:21:30 Get A/D value=-858993460 result=40 05:21:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:30 Parameters OK 05:21:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:30 Set A/D data flow result=40 05:21:30 Set A/D channel type result=40 05:21:30 Set A/D encoding result=40 05:21:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:30 Set channel filter=0.000000e+000 result=40 05:21:30 Config A/D Result=40 05:21:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:30 Get A/D filter: -9.255963e+061 result=40 05:21:30 Get A/D value=-858993460 result=40 05:21:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:21:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:21:30 Aux= 05:21:30 Message to Camera, serial 95332 queued 05:22:07 Received message from Master: op=PointingHead serial=95345 05:22:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:22:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:22:07 Point started: ret=0 05:22:07 point_skyscan result=0 05:22:08 Check angles 05:22:08 SkyScan query 05:22:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:22:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:22:08 Message to Master queued w/err=0: serial=95345 error=0 05:22:13 Received message from Master: op=Filter serial=95346 05:22:13 Color wheel filter change from 0 to 0 05:22:13 FLIGetFilterPos err=0 currentPosition=0 05:22:13 FLIGetStepsRemaining err=0 RemainingSteps=0 05:22:13 Filter is already there-color wheel unchanged 05:22:13 Received message from Master: op=Shutter serial=95347 05:22:13 Shutter LASER close 05:22:13 Received message from Camera: op=State serial=95349 05:22:13 GetSingleValue result=40 Value=cccccccc 05:22:13 SkyScan query 05:22:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:22:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:14 Parameters OK 05:22:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:14 Set A/D data flow result=40 05:22:14 Set A/D channel type result=40 05:22:14 Set A/D encoding result=40 05:22:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:14 Set channel filter=0.000000e+000 result=40 05:22:14 Config A/D Result=40 05:22:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:14 Get A/D filter: -9.255963e+061 result=40 05:22:14 Get A/D value=-858993460 result=40 05:22:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:14 Parameters OK 05:22:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:14 Set A/D data flow result=40 05:22:14 Set A/D channel type result=40 05:22:14 Set A/D encoding result=40 05:22:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:14 Set channel filter=0.000000e+000 result=40 05:22:14 Config A/D Result=40 05:22:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:14 Get A/D filter: -9.255963e+061 result=40 05:22:14 Get A/D value=-858993460 result=40 05:22:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:22:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:22:14 Aux= 05:22:14 Message to Camera, serial 95349 queued 05:22:51 Received message from Master: op=PointingHead serial=95362 05:22:51 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:22:51 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:22:51 Point started: ret=0 05:22:51 point_skyscan result=0 05:22:52 Check angles 05:22:52 SkyScan query 05:22:53 SkyScan query done: ret=0 az=136.14<-9076 ze=-6.51<-12434 Statuses=0009 0008 05:22:53 Msec=0 True Az=136.14 Ze=-6.51 Az status=0009 Ze status=0008 05:22:53 Check angles 05:22:53 SkyScan query 05:22:53 SkyScan query done: ret=0 az=153.99<-10266 ze=-6.495<-12433 Statuses=0009 0008 05:22:53 Msec=750 True Az=153.99 Ze=-6.495 Az status=0009 Ze status=0008 05:22:53 Check angles 05:22:53 SkyScan query 05:22:54 SkyScan query done: ret=0 az=171.435<-11429 ze=-6.495<-12433 Statuses=0009 0008 05:22:54 Msec=1500 True Az=171.435 Ze=-6.495 Az status=0009 Ze status=0008 05:22:54 Check angles 05:22:54 SkyScan query 05:22:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:22:55 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:22:55 Message to Master queued w/err=0: serial=95362 error=0 05:23:00 Received message from Master: op=Filter serial=95363 05:23:00 Color wheel filter change from 0 to 0 05:23:00 FLIGetFilterPos err=0 currentPosition=0 05:23:00 FLIGetStepsRemaining err=0 RemainingSteps=0 05:23:00 Filter is already there-color wheel unchanged 05:23:00 Received message from Master: op=Shutter serial=95364 05:23:00 Shutter LASER close 05:23:00 Received message from Camera: op=State serial=95366 05:23:00 GetSingleValue result=40 Value=cccccccc 05:23:00 SkyScan query 05:23:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:23:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:01 Parameters OK 05:23:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:01 Set A/D data flow result=40 05:23:01 Set A/D channel type result=40 05:23:01 Set A/D encoding result=40 05:23:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:01 Set channel filter=0.000000e+000 result=40 05:23:01 Config A/D Result=40 05:23:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:01 Get A/D filter: -9.255963e+061 result=40 05:23:01 Get A/D value=-858993460 result=40 05:23:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:01 Parameters OK 05:23:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:01 Set A/D data flow result=40 05:23:01 Set A/D channel type result=40 05:23:01 Set A/D encoding result=40 05:23:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:01 Set channel filter=0.000000e+000 result=40 05:23:01 Config A/D Result=40 05:23:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:01 Get A/D filter: -9.255963e+061 result=40 05:23:01 Get A/D value=-858993460 result=40 05:23:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:23:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:23:01 Aux= 05:23:01 Message to Camera, serial 95366 queued 05:23:37 Received message from Master: op=PointingHead serial=95379 05:23:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:23:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:23:38 Point started: ret=0 05:23:38 point_skyscan result=0 05:23:39 Check angles 05:23:39 SkyScan query 05:23:39 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 05:23:39 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 05:23:39 Check angles 05:23:39 SkyScan query 05:23:40 SkyScan query done: ret=0 az=135.285<-9019 ze=6.495<-11567 Statuses=0009 0008 05:23:40 Msec=750 True Az=135.285 Ze=6.495 Az status=0009 Ze status=0008 05:23:40 Check angles 05:23:40 SkyScan query 05:23:41 SkyScan query done: ret=0 az=117.42<-7828 ze=6.495<-11567 Statuses=0009 0008 05:23:41 Msec=1500 True Az=117.42 Ze=6.495 Az status=0009 Ze status=0008 05:23:41 Check angles 05:23:41 SkyScan query 05:23:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:23:41 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:23:41 Message to Master queued w/err=0: serial=95379 error=0 05:23:46 Received message from Master: op=Filter serial=95380 05:23:46 Color wheel filter change from 0 to 0 05:23:46 FLIGetFilterPos err=0 currentPosition=0 05:23:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:23:46 Filter is already there-color wheel unchanged 05:23:47 Received message from Master: op=Shutter serial=95381 05:23:47 Shutter LASER close 05:23:47 Received message from Camera: op=State serial=95383 05:23:47 GetSingleValue result=40 Value=cccccccc 05:23:47 SkyScan query 05:23:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:23:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:47 Parameters OK 05:23:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:47 Set A/D data flow result=40 05:23:47 Set A/D channel type result=40 05:23:47 Set A/D encoding result=40 05:23:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:47 Set channel filter=0.000000e+000 result=40 05:23:47 Config A/D Result=40 05:23:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:47 Get A/D filter: -9.255963e+061 result=40 05:23:47 Get A/D value=-858993460 result=40 05:23:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:47 Parameters OK 05:23:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:47 Set A/D data flow result=40 05:23:47 Set A/D channel type result=40 05:23:47 Set A/D encoding result=40 05:23:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:47 Set channel filter=0.000000e+000 result=40 05:23:47 Config A/D Result=40 05:23:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:47 Get A/D filter: -9.255963e+061 result=40 05:23:47 Get A/D value=-858993460 result=40 05:23:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:23:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:23:47 Aux= 05:23:47 Message to Camera, serial 95383 queued [UTC 2019-3-4 05:23:50] 05:24:24 Received message from Master: op=PointingHead serial=95396 05:24:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:24:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:24:24 Point started: ret=0 05:24:24 point_skyscan result=0 05:24:25 Check angles 05:24:25 SkyScan query 05:24:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.995<-13533 Statuses=0008 0009 05:24:26 Msec=0 True Az=112.995 Ze=-22.995 Az status=0008 Ze status=0009 05:24:26 Check angles 05:24:26 SkyScan query 05:24:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.01<-14934 Statuses=0008 0009 05:24:26 Msec=750 True Az=112.995 Ze=-44.01 Az status=0008 Ze status=0009 05:24:27 Check angles 05:24:27 SkyScan query 05:24:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.935<-16329 Statuses=0008 0009 05:24:27 Msec=1500 True Az=112.995 Ze=-64.935 Az status=0008 Ze status=0009 05:24:27 Check angles 05:24:27 SkyScan query 05:24:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 05:24:28 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 05:24:28 Check angles 05:24:28 SkyScan query 05:24:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.7<-19180 Statuses=0008 0009 05:24:29 Msec=3000 True Az=112.995 Ze=-107.7 Az status=0008 Ze status=0009 05:24:29 Check angles 05:24:29 SkyScan query 05:24:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.625<-20575 Statuses=0008 0009 05:24:29 Msec=3750 True Az=112.995 Ze=-128.625 Az status=0008 Ze status=0009 05:24:30 Check angles 05:24:30 SkyScan query 05:24:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.61<-21974 Statuses=0008 0009 05:24:30 Msec=4500 True Az=112.995 Ze=-149.61 Az status=0008 Ze status=0009 05:24:30 Check angles 05:24:30 SkyScan query 05:24:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.535<-23369 Statuses=0008 0009 05:24:31 Msec=5250 True Az=112.995 Ze=-170.535 Az status=0008 Ze status=0009 05:24:31 Check angles 05:24:31 SkyScan query 05:24:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:24:32 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:24:32 Message to Master queued w/err=0: serial=95396 error=0 05:24:37 Received message from Master: op=Filter serial=95397 05:24:37 Color wheel filter change from 0 to 0 05:24:37 FLIGetFilterPos err=0 currentPosition=0 05:24:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:24:37 Filter is already there-color wheel unchanged 05:24:37 Received message from Master: op=Shutter serial=95398 05:24:37 Shutter LASER open 05:24:37 Received message from Camera: op=State serial=95400 05:24:37 GetSingleValue result=40 Value=cccccccc 05:24:37 SkyScan query 05:24:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:24:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:38 Parameters OK 05:24:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:38 Set A/D data flow result=40 05:24:38 Set A/D channel type result=40 05:24:38 Set A/D encoding result=40 05:24:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:38 Set channel filter=0.000000e+000 result=40 05:24:38 Config A/D Result=40 05:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:38 Get A/D filter: -9.255963e+061 result=40 05:24:38 Get A/D value=-858993460 result=40 05:24:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:38 Parameters OK 05:24:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:38 Set A/D data flow result=40 05:24:38 Set A/D channel type result=40 05:24:38 Set A/D encoding result=40 05:24:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:38 Set channel filter=0.000000e+000 result=40 05:24:38 Config A/D Result=40 05:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:38 Get A/D filter: -9.255963e+061 result=40 05:24:38 Get A/D value=-858993460 result=40 05:24:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:24:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:24:38 Aux= 05:24:38 Message to Camera, serial 95400 queued 05:24:46 Received message from Master: op=Shutter serial=95410 05:24:46 Shutter LASER close 05:24:47 Received message from Master: op=PointingHead serial=95414 05:24:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:24:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:24:47 Point started: ret=0 05:24:47 point_skyscan result=0 05:24:48 Check angles 05:24:48 SkyScan query 05:24:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 05:24:48 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 05:24:48 Check angles 05:24:48 SkyScan query 05:24:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 05:24:49 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 05:24:49 Check angles 05:24:49 SkyScan query 05:24:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.415<-18761 Statuses=0008 0009 05:24:50 Msec=1500 True Az=112.995 Ze=-101.415 Az status=0008 Ze status=0009 05:24:50 Check angles 05:24:50 SkyScan query 05:24:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.445<-17363 Statuses=0008 0009 05:24:50 Msec=2250 True Az=112.995 Ze=-80.445 Az status=0008 Ze status=0009 05:24:51 Check angles 05:24:51 SkyScan query 05:24:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.505<-15967 Statuses=0008 0009 05:24:51 Msec=3000 True Az=112.995 Ze=-59.505 Az status=0008 Ze status=0009 05:24:51 Check angles 05:24:51 SkyScan query 05:24:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.55<-14570 Statuses=0008 0009 05:24:52 Msec=3750 True Az=112.995 Ze=-38.55 Az status=0008 Ze status=0009 05:24:52 Check angles 05:24:52 SkyScan query 05:24:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.595<-13173 Statuses=0008 0009 05:24:53 Msec=4500 True Az=112.995 Ze=-17.595 Az status=0008 Ze status=0009 05:24:53 Check angles 05:24:53 SkyScan query 05:24:53 SkyScan query done: ret=0 az=112.995<-7533 ze=3.33<-11778 Statuses=0008 0009 05:24:53 Msec=5250 True Az=112.995 Ze=3.33 Az status=0008 Ze status=0009 05:24:54 Check angles 05:24:54 SkyScan query 05:24:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:24:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:24:54 Message to Master queued w/err=0: serial=95414 error=0 05:24:59 Received message from Master: op=Filter serial=95415 05:24:59 Color wheel filter change from 0 to 0 05:24:59 FLIGetFilterPos err=0 currentPosition=0 05:24:59 FLIGetStepsRemaining err=0 RemainingSteps=0 05:24:59 Filter is already there-color wheel unchanged 05:24:59 Received message from Master: op=Shutter serial=95416 05:24:59 Shutter LASER close 05:25:00 Received message from Camera: op=State serial=95418 05:25:00 GetSingleValue result=40 Value=cccccccc 05:25:00 SkyScan query 05:25:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:25:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:00 Parameters OK 05:25:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:00 Set A/D data flow result=40 05:25:00 Set A/D channel type result=40 05:25:00 Set A/D encoding result=40 05:25:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:00 Set channel filter=0.000000e+000 result=40 05:25:00 Config A/D Result=40 05:25:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:00 Get A/D filter: -9.255963e+061 result=40 05:25:00 Get A/D value=-858993460 result=40 05:25:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:00 Parameters OK 05:25:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:00 Set A/D data flow result=40 05:25:00 Set A/D channel type result=40 05:25:00 Set A/D encoding result=40 05:25:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:00 Set channel filter=0.000000e+000 result=40 05:25:00 Config A/D Result=40 05:25:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:00 Get A/D filter: -9.255963e+061 result=40 05:25:00 Get A/D value=-858993460 result=40 05:25:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:00 Aux= 05:25:00 Message to Camera, serial 95418 queued 05:25:37 Received message from Master: op=PointingHead serial=95431 05:25:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:25:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:25:37 Point started: ret=0 05:25:37 point_skyscan result=0 05:25:38 Check angles 05:25:38 SkyScan query 05:25:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:25:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:25:39 Message to Master queued w/err=0: serial=95431 error=0 05:25:44 Received message from Master: op=Filter serial=95432 05:25:44 Color wheel filter change from 0 to 0 05:25:44 FLIGetFilterPos err=0 currentPosition=0 05:25:44 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:44 Filter is already there-color wheel unchanged 05:25:44 Received message from Master: op=Shutter serial=95433 05:25:44 Shutter LASER close 05:25:44 Received message from Camera: op=State serial=95435 05:25:44 GetSingleValue result=40 Value=cccccccc 05:25:44 SkyScan query 05:25:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:25:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:44 Parameters OK 05:25:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:44 Set A/D data flow result=40 05:25:44 Set A/D channel type result=40 05:25:44 Set A/D encoding result=40 05:25:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:44 Set channel filter=0.000000e+000 result=40 05:25:44 Config A/D Result=40 05:25:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:44 Get A/D filter: -9.255963e+061 result=40 05:25:44 Get A/D value=-858993460 result=40 05:25:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:44 Parameters OK 05:25:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:44 Set A/D data flow result=40 05:25:44 Set A/D channel type result=40 05:25:44 Set A/D encoding result=40 05:25:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:44 Set channel filter=0.000000e+000 result=40 05:25:44 Config A/D Result=40 05:25:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:44 Get A/D filter: -9.255963e+061 result=40 05:25:44 Get A/D value=-858993460 result=40 05:25:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:44 Aux= 05:25:44 Message to Camera, serial 95435 queued 05:26:21 Received message from Master: op=PointingHead serial=95448 05:26:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:26:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:26:22 Point started: ret=0 05:26:22 point_skyscan result=0 05:26:22 Check angles 05:26:22 SkyScan query 05:26:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:26:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:26:23 Message to Master queued w/err=0: serial=95448 error=0 05:26:28 Received message from Master: op=Filter serial=95449 05:26:28 Color wheel filter change from 0 to 0 05:26:28 FLIGetFilterPos err=0 currentPosition=0 05:26:28 FLIGetStepsRemaining err=0 RemainingSteps=0 05:26:28 Filter is already there-color wheel unchanged 05:26:28 Received message from Master: op=Shutter serial=95450 05:26:28 Shutter LASER close 05:26:28 Received message from Camera: op=State serial=95452 05:26:28 GetSingleValue result=40 Value=cccccccc 05:26:28 SkyScan query 05:26:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:26:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:29 Parameters OK 05:26:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:29 Set A/D data flow result=40 05:26:29 Set A/D channel type result=40 05:26:29 Set A/D encoding result=40 05:26:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:29 Set channel filter=0.000000e+000 result=40 05:26:29 Config A/D Result=40 05:26:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:29 Get A/D filter: -9.255963e+061 result=40 05:26:29 Get A/D value=-858993460 result=40 05:26:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:29 Parameters OK 05:26:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:29 Set A/D data flow result=40 05:26:29 Set A/D channel type result=40 05:26:29 Set A/D encoding result=40 05:26:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:29 Set channel filter=0.000000e+000 result=40 05:26:29 Config A/D Result=40 05:26:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:29 Get A/D filter: -9.255963e+061 result=40 05:26:29 Get A/D value=-858993460 result=40 05:26:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:26:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:26:29 Aux= 05:26:29 Message to Camera, serial 95452 queued 05:27:05 Received message from Master: op=PointingHead serial=95464 05:27:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:27:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:27:05 Point started: ret=0 05:27:05 point_skyscan result=0 05:27:06 Check angles 05:27:06 SkyScan query 05:27:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:27:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:27:06 Message to Master queued w/err=0: serial=95464 error=0 05:27:11 Received message from Master: op=Filter serial=95465 05:27:11 Color wheel filter change from 0 to 0 05:27:11 FLIGetFilterPos err=0 currentPosition=0 05:27:11 FLIGetStepsRemaining err=0 RemainingSteps=0 05:27:11 Filter is already there-color wheel unchanged 05:27:11 Received message from Master: op=Shutter serial=95466 05:27:11 Shutter LASER close 05:27:11 Received message from Camera: op=State serial=95468 05:27:11 GetSingleValue result=40 Value=cccccccc 05:27:11 SkyScan query 05:27:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:27:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:12 Parameters OK 05:27:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:12 Set A/D data flow result=40 05:27:12 Set A/D channel type result=40 05:27:12 Set A/D encoding result=40 05:27:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:12 Set channel filter=0.000000e+000 result=40 05:27:12 Config A/D Result=40 05:27:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:12 Get A/D filter: -9.255963e+061 result=40 05:27:12 Get A/D value=-858993460 result=40 05:27:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:12 Parameters OK 05:27:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:12 Set A/D data flow result=40 05:27:12 Set A/D channel type result=40 05:27:12 Set A/D encoding result=40 05:27:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:12 Set channel filter=0.000000e+000 result=40 05:27:12 Config A/D Result=40 05:27:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:12 Get A/D filter: -9.255963e+061 result=40 05:27:12 Get A/D value=-858993460 result=40 05:27:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:27:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:27:12 Aux= 05:27:12 Message to Camera, serial 95468 queued 05:27:49 Received message from Master: op=PointingHead serial=95481 05:27:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:27:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:27:49 Point started: ret=0 05:27:49 point_skyscan result=0 05:27:50 Check angles 05:27:50 SkyScan query 05:27:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 05:27:51 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 05:27:51 Check angles 05:27:51 SkyScan query 05:27:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.145<-14943 Statuses=0008 0009 05:27:51 Msec=750 True Az=112.995 Ze=-44.145 Az status=0008 Ze status=0009 05:27:51 Check angles 05:27:51 SkyScan query 05:27:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.085<-16339 Statuses=0008 0009 05:27:52 Msec=1500 True Az=112.995 Ze=-65.085 Az status=0008 Ze status=0009 05:27:52 Check angles 05:27:52 SkyScan query 05:27:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.07<-17738 Statuses=0008 0009 05:27:53 Msec=2250 True Az=112.995 Ze=-86.07 Az status=0008 Ze status=0009 05:27:53 Check angles 05:27:53 SkyScan query 05:27:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.995<-19133 Statuses=0008 0009 05:27:54 Msec=3000 True Az=112.995 Ze=-106.995 Az status=0008 Ze status=0009 05:27:54 Check angles 05:27:54 SkyScan query 05:27:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.37<-20558 Statuses=0008 0009 05:27:54 Msec=3750 True Az=112.995 Ze=-128.37 Az status=0008 Ze status=0009 05:27:54 Check angles 05:27:54 SkyScan query 05:27:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.325<-21955 Statuses=0008 0009 05:27:55 Msec=4500 True Az=112.995 Ze=-149.325 Az status=0008 Ze status=0009 05:27:55 Check angles 05:27:55 SkyScan query 05:27:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.28<-23352 Statuses=0008 0009 05:27:56 Msec=5250 True Az=112.995 Ze=-170.28 Az status=0008 Ze status=0009 05:27:56 Check angles 05:27:56 SkyScan query 05:27:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:27:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:27:57 Message to Master queued w/err=0: serial=95481 error=0 05:28:02 Received message from Master: op=Filter serial=95482 05:28:02 Color wheel filter change from 0 to 0 05:28:02 FLIGetFilterPos err=0 currentPosition=0 05:28:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:02 Filter is already there-color wheel unchanged 05:28:02 Received message from Master: op=Shutter serial=95483 05:28:02 Shutter LASER open 05:28:02 Received message from Camera: op=State serial=95485 05:28:02 GetSingleValue result=40 Value=cccccccc 05:28:02 SkyScan query 05:28:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:28:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:02 Parameters OK 05:28:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:02 Set A/D data flow result=40 05:28:02 Set A/D channel type result=40 05:28:02 Set A/D encoding result=40 05:28:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:02 Set channel filter=0.000000e+000 result=40 05:28:02 Config A/D Result=40 05:28:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:02 Get A/D filter: -9.255963e+061 result=40 05:28:02 Get A/D value=-858993460 result=40 05:28:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:02 Parameters OK 05:28:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:02 Set A/D data flow result=40 05:28:02 Set A/D channel type result=40 05:28:02 Set A/D encoding result=40 05:28:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:02 Set channel filter=0.000000e+000 result=40 05:28:02 Config A/D Result=40 05:28:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:02 Get A/D filter: -9.255963e+061 result=40 05:28:02 Get A/D value=-858993460 result=40 05:28:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:02 Aux= 05:28:02 Message to Camera, serial 95485 queued 05:28:11 Received message from Master: op=Shutter serial=95495 05:28:11 Shutter LASER close 05:28:11 Received message from Master: op=PointingHead serial=95499 05:28:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:28:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:28:12 Point started: ret=0 05:28:12 point_skyscan result=0 05:28:13 Check angles 05:28:13 SkyScan query 05:28:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.89<-21526 Statuses=0008 0009 05:28:13 Msec=0 True Az=112.995 Ze=-142.89 Az status=0008 Ze status=0009 05:28:13 Check angles 05:28:13 SkyScan query 05:28:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.5<-20100 Statuses=0008 0009 05:28:14 Msec=750 True Az=112.995 Ze=-121.5 Az status=0008 Ze status=0009 05:28:14 Check angles 05:28:14 SkyScan query 05:28:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.575<-18705 Statuses=0008 0009 05:28:15 Msec=1500 True Az=112.995 Ze=-100.575 Az status=0008 Ze status=0009 05:28:15 Check angles 05:28:15 SkyScan query 05:28:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.59<-17306 Statuses=0008 0009 05:28:15 Msec=2250 True Az=112.995 Ze=-79.59 Az status=0008 Ze status=0009 05:28:16 Check angles 05:28:16 SkyScan query 05:28:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.17<-15878 Statuses=0008 0009 05:28:16 Msec=3000 True Az=112.995 Ze=-58.17 Az status=0008 Ze status=0009 05:28:16 Check angles 05:28:16 SkyScan query 05:28:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.26<-14484 Statuses=0008 0009 05:28:17 Msec=3750 True Az=112.995 Ze=-37.26 Az status=0008 Ze status=0009 05:28:17 Check angles 05:28:17 SkyScan query 05:28:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.29<-13086 Statuses=0008 0009 05:28:18 Msec=4500 True Az=112.995 Ze=-16.29 Az status=0008 Ze status=0009 05:28:18 Check angles 05:28:18 SkyScan query 05:28:18 SkyScan query done: ret=0 az=112.995<-7533 ze=4.53<-11698 Statuses=0008 0009 05:28:18 Msec=5250 True Az=112.995 Ze=4.53 Az status=0008 Ze status=0009 05:28:19 Check angles 05:28:19 SkyScan query 05:28:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:28:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:28:19 Message to Master queued w/err=0: serial=95499 error=0 05:28:24 Received message from Master: op=Filter serial=95500 05:28:24 Color wheel filter change from 0 to 0 05:28:24 FLIGetFilterPos err=0 currentPosition=0 05:28:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:24 Filter is already there-color wheel unchanged 05:28:24 Received message from Master: op=Shutter serial=95501 05:28:24 Shutter LASER close 05:28:25 Received message from Camera: op=State serial=95503 05:28:25 GetSingleValue result=40 Value=cccccccc 05:28:25 SkyScan query 05:28:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:28:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:25 Parameters OK 05:28:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:25 Set A/D data flow result=40 05:28:25 Set A/D channel type result=40 05:28:25 Set A/D encoding result=40 05:28:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:25 Set channel filter=0.000000e+000 result=40 05:28:25 Config A/D Result=40 05:28:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:25 Get A/D filter: -9.255963e+061 result=40 05:28:25 Get A/D value=-858993460 result=40 05:28:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:25 Parameters OK 05:28:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:25 Set A/D data flow result=40 05:28:25 Set A/D channel type result=40 05:28:25 Set A/D encoding result=40 05:28:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:25 Set channel filter=0.000000e+000 result=40 05:28:25 Config A/D Result=40 05:28:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:25 Get A/D filter: -9.255963e+061 result=40 05:28:25 Get A/D value=-858993460 result=40 05:28:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:25 Aux= 05:28:25 Message to Camera, serial 95503 queued 05:29:01 Received message from Master: op=PointingHead serial=95515 05:29:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:29:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:29:01 Point started: ret=0 05:29:01 point_skyscan result=0 05:29:02 Check angles 05:29:02 SkyScan query 05:29:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:29:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:29:03 Message to Master queued w/err=0: serial=95515 error=0 05:29:08 Received message from Master: op=Filter serial=95516 05:29:08 Color wheel filter change from 0 to 0 05:29:08 FLIGetFilterPos err=0 currentPosition=0 05:29:08 FLIGetStepsRemaining err=0 RemainingSteps=0 05:29:08 Filter is already there-color wheel unchanged 05:29:08 Received message from Master: op=Shutter serial=95517 05:29:08 Shutter LASER close 05:29:08 Received message from Camera: op=State serial=95519 05:29:08 GetSingleValue result=40 Value=cccccccc 05:29:08 SkyScan query 05:29:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:29:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:08 Parameters OK 05:29:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:08 Set A/D data flow result=40 05:29:08 Set A/D channel type result=40 05:29:08 Set A/D encoding result=40 05:29:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:08 Set channel filter=0.000000e+000 result=40 05:29:08 Config A/D Result=40 05:29:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:08 Get A/D filter: -9.255963e+061 result=40 05:29:08 Get A/D value=-858993460 result=40 05:29:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:08 Parameters OK 05:29:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:08 Set A/D data flow result=40 05:29:08 Set A/D channel type result=40 05:29:08 Set A/D encoding result=40 05:29:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:08 Set channel filter=0.000000e+000 result=40 05:29:08 Config A/D Result=40 05:29:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:08 Get A/D filter: -9.255963e+061 result=40 05:29:08 Get A/D value=-858993460 result=40 05:29:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:29:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:29:08 Aux= 05:29:08 Message to Camera, serial 95519 queued 05:29:45 Received message from Master: op=PointingHead serial=95532 05:29:45 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:29:45 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:29:46 Point started: ret=0 05:29:46 point_skyscan result=0 05:29:46 Check angles 05:29:46 SkyScan query 05:29:47 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 05:29:47 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 05:29:47 Check angles 05:29:47 SkyScan query 05:29:48 SkyScan query done: ret=0 az=153.69<-10246 ze=-6.495<-12433 Statuses=0009 0008 05:29:48 Msec=750 True Az=153.69 Ze=-6.495 Az status=0009 Ze status=0008 05:29:48 Check angles 05:29:48 SkyScan query 05:29:48 SkyScan query done: ret=0 az=171.195<-11413 ze=-6.495<-12433 Statuses=0009 0008 05:29:48 Msec=1500 True Az=171.195 Ze=-6.495 Az status=0009 Ze status=0008 05:29:49 Check angles 05:29:49 SkyScan query 05:29:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:29:49 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:29:49 Message to Master queued w/err=0: serial=95532 error=0 05:29:54 Received message from Master: op=Filter serial=95533 05:29:54 Color wheel filter change from 0 to 0 05:29:54 FLIGetFilterPos err=0 currentPosition=0 05:29:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:29:54 Filter is already there-color wheel unchanged 05:29:54 Received message from Master: op=Shutter serial=95534 05:29:54 Shutter LASER close 05:29:54 Received message from Camera: op=State serial=95536 05:29:54 GetSingleValue result=40 Value=cccccccc 05:29:54 SkyScan query 05:29:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:29:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:55 Parameters OK 05:29:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:55 Set A/D data flow result=40 05:29:55 Set A/D channel type result=40 05:29:55 Set A/D encoding result=40 05:29:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:55 Set channel filter=0.000000e+000 result=40 05:29:55 Config A/D Result=40 05:29:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:55 Get A/D filter: -9.255963e+061 result=40 05:29:55 Get A/D value=-858993460 result=40 05:29:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:55 Parameters OK 05:29:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:55 Set A/D data flow result=40 05:29:55 Set A/D channel type result=40 05:29:55 Set A/D encoding result=40 05:29:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:55 Set channel filter=0.000000e+000 result=40 05:29:55 Config A/D Result=40 05:29:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:55 Get A/D filter: -9.255963e+061 result=40 05:29:55 Get A/D value=-858993460 result=40 05:29:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:29:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:29:55 Aux= 05:29:55 Message to Camera, serial 95536 queued 05:30:32 Received message from Master: op=PointingHead serial=95549 05:30:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:30:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:30:32 Point started: ret=0 05:30:32 point_skyscan result=0 05:30:33 Check angles 05:30:33 SkyScan query 05:30:34 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 05:30:34 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 05:30:34 Check angles 05:30:34 SkyScan query 05:30:34 SkyScan query done: ret=0 az=134.775<-8985 ze=6.495<-11567 Statuses=0009 0008 05:30:34 Msec=750 True Az=134.775 Ze=6.495 Az status=0009 Ze status=0008 05:30:34 Check angles 05:30:34 SkyScan query 05:30:35 SkyScan query done: ret=0 az=117.345<-7823 ze=6.495<-11567 Statuses=0009 0008 05:30:35 Msec=1500 True Az=117.345 Ze=6.495 Az status=0009 Ze status=0008 05:30:35 Check angles 05:30:35 SkyScan query 05:30:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:30:36 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:30:36 Message to Master queued w/err=0: serial=95549 error=0 05:30:41 Received message from Master: op=Filter serial=95550 05:30:41 Color wheel filter change from 0 to 0 05:30:41 FLIGetFilterPos err=0 currentPosition=0 05:30:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:30:41 Filter is already there-color wheel unchanged 05:30:41 Received message from Master: op=Shutter serial=95551 05:30:41 Shutter LASER close 05:30:41 Received message from Camera: op=State serial=95553 05:30:41 GetSingleValue result=40 Value=cccccccc 05:30:41 SkyScan query 05:30:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:30:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:42 Parameters OK 05:30:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:42 Set A/D data flow result=40 05:30:42 Set A/D channel type result=40 05:30:42 Set A/D encoding result=40 05:30:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:42 Set channel filter=0.000000e+000 result=40 05:30:42 Config A/D Result=40 05:30:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:42 Get A/D filter: -9.255963e+061 result=40 05:30:42 Get A/D value=-858993460 result=40 05:30:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:42 Parameters OK 05:30:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:42 Set A/D data flow result=40 05:30:42 Set A/D channel type result=40 05:30:42 Set A/D encoding result=40 05:30:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:42 Set channel filter=0.000000e+000 result=40 05:30:42 Config A/D Result=40 05:30:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:42 Get A/D filter: -9.255963e+061 result=40 05:30:42 Get A/D value=-858993460 result=40 05:30:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:30:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:30:42 Aux= 05:30:42 Message to Camera, serial 95553 queued 05:31:18 Received message from Master: op=PointingHead serial=95566 05:31:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:31:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:31:19 Point started: ret=0 05:31:19 point_skyscan result=0 05:31:19 Check angles 05:31:19 SkyScan query 05:31:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 05:31:20 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 05:31:20 Check angles 05:31:20 SkyScan query 05:31:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.07<-14938 Statuses=0008 0009 05:31:21 Msec=750 True Az=112.995 Ze=-44.07 Az status=0008 Ze status=0009 05:31:21 Check angles 05:31:21 SkyScan query 05:31:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.98<-16332 Statuses=0008 0009 05:31:22 Msec=1500 True Az=112.995 Ze=-64.98 Az status=0008 Ze status=0009 05:31:22 Check angles 05:31:22 SkyScan query 05:31:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.98<-17732 Statuses=0008 0009 05:31:22 Msec=2250 True Az=112.995 Ze=-85.98 Az status=0008 Ze status=0009 05:31:22 Check angles 05:31:22 SkyScan query 05:31:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.875<-19125 Statuses=0008 0009 05:31:23 Msec=3000 True Az=112.995 Ze=-106.875 Az status=0008 Ze status=0009 05:31:23 Check angles 05:31:23 SkyScan query 05:31:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.86<-20524 Statuses=0008 0009 05:31:24 Msec=3750 True Az=112.995 Ze=-127.86 Az status=0008 Ze status=0009 05:31:24 Check angles 05:31:24 SkyScan query 05:31:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.785<-21919 Statuses=0008 0009 05:31:25 Msec=4500 True Az=112.995 Ze=-148.785 Az status=0008 Ze status=0009 05:31:25 Check angles 05:31:25 SkyScan query 05:31:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.755<-23317 Statuses=0008 0009 05:31:25 Msec=5250 True Az=112.995 Ze=-169.755 Az status=0008 Ze status=0009 05:31:25 Check angles 05:31:25 SkyScan query 05:31:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:31:26 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:31:26 Message to Master queued w/err=0: serial=95566 error=0 05:31:31 Received message from Master: op=Filter serial=95567 05:31:31 Color wheel filter change from 0 to 0 05:31:31 FLIGetFilterPos err=0 currentPosition=0 05:31:31 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:31 Filter is already there-color wheel unchanged 05:31:31 Received message from Master: op=Shutter serial=95568 05:31:31 Shutter LASER open 05:31:31 Received message from Camera: op=State serial=95570 05:31:31 GetSingleValue result=40 Value=cccccccc 05:31:31 SkyScan query 05:31:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:31:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:32 Parameters OK 05:31:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:32 Set A/D data flow result=40 05:31:32 Set A/D channel type result=40 05:31:32 Set A/D encoding result=40 05:31:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:32 Set channel filter=0.000000e+000 result=40 05:31:32 Config A/D Result=40 05:31:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:32 Get A/D filter: -9.255963e+061 result=40 05:31:32 Get A/D value=-858993460 result=40 05:31:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:32 Parameters OK 05:31:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:32 Set A/D data flow result=40 05:31:32 Set A/D channel type result=40 05:31:32 Set A/D encoding result=40 05:31:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:32 Set channel filter=0.000000e+000 result=40 05:31:32 Config A/D Result=40 05:31:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:32 Get A/D filter: -9.255963e+061 result=40 05:31:32 Get A/D value=-858993460 result=40 05:31:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:32 Aux= 05:31:32 Message to Camera, serial 95570 queued 05:31:40 Received message from Master: op=Shutter serial=95580 05:31:40 Shutter LASER close 05:31:41 Received message from Master: op=PointingHead serial=95584 05:31:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:31:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:31:41 Point started: ret=0 05:31:41 point_skyscan result=0 05:31:42 Check angles 05:31:42 SkyScan query 05:31:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 05:31:43 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 05:31:43 Check angles 05:31:43 SkyScan query 05:31:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 05:31:43 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 05:31:43 Check angles 05:31:43 SkyScan query 05:31:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.52<-18768 Statuses=0008 0009 05:31:44 Msec=1500 True Az=112.995 Ze=-101.52 Az status=0008 Ze status=0009 05:31:44 Check angles 05:31:44 SkyScan query 05:31:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.565<-17371 Statuses=0008 0009 05:31:45 Msec=2250 True Az=112.995 Ze=-80.565 Az status=0008 Ze status=0009 05:31:45 Check angles 05:31:45 SkyScan query 05:31:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 05:31:46 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 05:31:46 Check angles 05:31:46 SkyScan query 05:31:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.19<-14546 Statuses=0008 0009 05:31:46 Msec=3750 True Az=112.995 Ze=-38.19 Az status=0008 Ze status=0009 05:31:46 Check angles 05:31:46 SkyScan query 05:31:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.265<-13151 Statuses=0008 0009 05:31:47 Msec=4500 True Az=112.995 Ze=-17.265 Az status=0008 Ze status=0009 05:31:47 Check angles 05:31:47 SkyScan query 05:31:48 SkyScan query done: ret=0 az=112.995<-7533 ze=4.125<-11725 Statuses=0008 0009 05:31:48 Msec=5250 True Az=112.995 Ze=4.125 Az status=0008 Ze status=0009 05:31:48 Check angles 05:31:48 SkyScan query 05:31:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:31:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:31:49 Message to Master queued w/err=0: serial=95584 error=0 05:31:54 Received message from Master: op=Filter serial=95585 05:31:54 Color wheel filter change from 0 to 0 05:31:54 FLIGetFilterPos err=0 currentPosition=0 05:31:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:54 Filter is already there-color wheel unchanged 05:31:54 Received message from Master: op=Shutter serial=95586 05:31:54 Shutter LASER close 05:31:54 Received message from Camera: op=State serial=95588 05:31:54 GetSingleValue result=40 Value=cccccccc 05:31:54 SkyScan query 05:31:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:31:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:54 Parameters OK 05:31:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:54 Set A/D data flow result=40 05:31:54 Set A/D channel type result=40 05:31:54 Set A/D encoding result=40 05:31:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:54 Set channel filter=0.000000e+000 result=40 05:31:54 Config A/D Result=40 05:31:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:54 Get A/D filter: -9.255963e+061 result=40 05:31:54 Get A/D value=-858993460 result=40 05:31:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:54 Parameters OK 05:31:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:54 Set A/D data flow result=40 05:31:54 Set A/D channel type result=40 05:31:54 Set A/D encoding result=40 05:31:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:54 Set channel filter=0.000000e+000 result=40 05:31:54 Config A/D Result=40 05:31:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:54 Get A/D filter: -9.255963e+061 result=40 05:31:54 Get A/D value=-858993460 result=40 05:31:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:54 Aux= 05:31:54 Message to Camera, serial 95588 queued 05:32:31 Received message from Master: op=PointingHead serial=95601 05:32:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:32:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:32:32 Point started: ret=0 05:32:32 point_skyscan result=0 05:32:32 Check angles 05:32:32 SkyScan query 05:32:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:32:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:32:33 Message to Master queued w/err=0: serial=95601 error=0 05:32:38 Received message from Master: op=Filter serial=95602 05:32:38 Color wheel filter change from 0 to 0 05:32:38 FLIGetFilterPos err=0 currentPosition=0 05:32:38 FLIGetStepsRemaining err=0 RemainingSteps=0 05:32:38 Filter is already there-color wheel unchanged 05:32:38 Received message from Master: op=Shutter serial=95603 05:32:38 Shutter LASER close 05:32:38 Received message from Camera: op=State serial=95605 05:32:38 GetSingleValue result=40 Value=cccccccc 05:32:38 SkyScan query 05:32:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:32:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:39 Parameters OK 05:32:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:39 Set A/D data flow result=40 05:32:39 Set A/D channel type result=40 05:32:39 Set A/D encoding result=40 05:32:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:39 Set channel filter=0.000000e+000 result=40 05:32:39 Config A/D Result=40 05:32:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:39 Get A/D filter: -9.255963e+061 result=40 05:32:39 Get A/D value=-858993460 result=40 05:32:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:39 Parameters OK 05:32:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:39 Set A/D data flow result=40 05:32:39 Set A/D channel type result=40 05:32:39 Set A/D encoding result=40 05:32:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:39 Set channel filter=0.000000e+000 result=40 05:32:39 Config A/D Result=40 05:32:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:39 Get A/D filter: -9.255963e+061 result=40 05:32:39 Get A/D value=-858993460 result=40 05:32:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:32:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:32:39 Aux= 05:32:39 Message to Camera, serial 95605 queued 05:33:16 Received message from Master: op=PointingHead serial=95618 05:33:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:33:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:33:16 Point started: ret=0 05:33:16 point_skyscan result=0 05:33:17 Check angles 05:33:17 SkyScan query 05:33:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:33:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:33:17 Message to Master queued w/err=0: serial=95618 error=0 05:33:22 Received message from Master: op=Filter serial=95619 05:33:22 Color wheel filter change from 0 to 0 05:33:22 FLIGetFilterPos err=0 currentPosition=0 05:33:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:33:22 Filter is already there-color wheel unchanged 05:33:23 Received message from Master: op=Shutter serial=95620 05:33:23 Shutter LASER close 05:33:23 Received message from Camera: op=State serial=95622 05:33:23 GetSingleValue result=40 Value=cccccccc 05:33:23 SkyScan query 05:33:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:33:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:23 Parameters OK 05:33:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:23 Set A/D data flow result=40 05:33:23 Set A/D channel type result=40 05:33:23 Set A/D encoding result=40 05:33:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:23 Set channel filter=0.000000e+000 result=40 05:33:23 Config A/D Result=40 05:33:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:23 Get A/D filter: -9.255963e+061 result=40 05:33:23 Get A/D value=-858993460 result=40 05:33:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:23 Parameters OK 05:33:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:23 Set A/D data flow result=40 05:33:23 Set A/D channel type result=40 05:33:23 Set A/D encoding result=40 05:33:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:23 Set channel filter=0.000000e+000 result=40 05:33:23 Config A/D Result=40 05:33:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:23 Get A/D filter: -9.255963e+061 result=40 05:33:23 Get A/D value=-858993460 result=40 05:33:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:33:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:33:23 Aux= 05:33:23 Message to Camera, serial 95622 queued 05:33:38 Received message from Master: op=Identify serial=95623 05:34:00 Received message from Master: op=PointingHead serial=95638 05:34:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:34:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:34:00 Point started: ret=0 05:34:00 point_skyscan result=0 05:34:01 Check angles 05:34:01 SkyScan query 05:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:34:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:34:02 Message to Master queued w/err=0: serial=95638 error=0 05:34:07 Received message from Master: op=Filter serial=95639 05:34:07 Color wheel filter change from 0 to 0 05:34:07 FLIGetFilterPos err=0 currentPosition=0 05:34:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:34:07 Filter is already there-color wheel unchanged 05:34:07 Received message from Master: op=Shutter serial=95640 05:34:07 Shutter LASER close 05:34:07 Received message from Camera: op=State serial=95642 05:34:07 GetSingleValue result=40 Value=cccccccc 05:34:07 SkyScan query 05:34:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:34:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:07 Parameters OK 05:34:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:07 Set A/D data flow result=40 05:34:07 Set A/D channel type result=40 05:34:07 Set A/D encoding result=40 05:34:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:07 Set channel filter=0.000000e+000 result=40 05:34:07 Config A/D Result=40 05:34:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:07 Get A/D filter: -9.255963e+061 result=40 05:34:07 Get A/D value=-858993460 result=40 05:34:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:07 Parameters OK 05:34:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:07 Set A/D data flow result=40 05:34:07 Set A/D channel type result=40 05:34:07 Set A/D encoding result=40 05:34:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:07 Set channel filter=0.000000e+000 result=40 05:34:07 Config A/D Result=40 05:34:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:07 Get A/D filter: -9.255963e+061 result=40 05:34:07 Get A/D value=-858993460 result=40 05:34:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:34:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:34:07 Aux= 05:34:07 Message to Camera, serial 95642 queued 05:34:44 Received message from Master: op=PointingHead serial=95655 05:34:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:34:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:34:45 Point started: ret=0 05:34:45 point_skyscan result=0 05:34:45 Check angles 05:34:45 SkyScan query 05:34:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 05:34:46 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 05:34:46 Check angles 05:34:46 SkyScan query [UTC 2019-3-4 05:34:47] 05:34:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.175<-14945 Statuses=0008 0009 05:34:47 Msec=750 True Az=112.995 Ze=-44.175 Az status=0008 Ze status=0009 05:34:47 Check angles 05:34:47 SkyScan query 05:34:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 05:34:47 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 05:34:48 Check angles 05:34:48 SkyScan query 05:34:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 05:34:48 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 05:34:48 Check angles 05:34:48 SkyScan query 05:34:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.46<-19164 Statuses=0008 0009 05:34:49 Msec=3000 True Az=112.995 Ze=-107.46 Az status=0008 Ze status=0009 05:34:49 Check angles 05:34:49 SkyScan query 05:34:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.805<-20587 Statuses=0008 0009 05:34:50 Msec=3750 True Az=112.995 Ze=-128.805 Az status=0008 Ze status=0009 05:34:50 Check angles 05:34:50 SkyScan query 05:34:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.225<-22015 Statuses=0008 0009 05:34:51 Msec=4500 True Az=112.995 Ze=-150.225 Az status=0008 Ze status=0009 05:34:51 Check angles 05:34:51 SkyScan query 05:34:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.03<-23402 Statuses=0008 0009 05:34:51 Msec=5250 True Az=112.995 Ze=-171.03 Az status=0008 Ze status=0009 05:34:51 Check angles 05:34:51 SkyScan query 05:34:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:34:52 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:34:52 Message to Master queued w/err=0: serial=95655 error=0 05:34:57 Received message from Master: op=Filter serial=95656 05:34:57 Color wheel filter change from 0 to 0 05:34:57 FLIGetFilterPos err=0 currentPosition=0 05:34:57 FLIGetStepsRemaining err=0 RemainingSteps=0 05:34:57 Filter is already there-color wheel unchanged 05:34:57 Received message from Master: op=Shutter serial=95657 05:34:57 Shutter LASER open 05:34:57 Received message from Camera: op=State serial=95659 05:34:57 GetSingleValue result=40 Value=cccccccc 05:34:57 SkyScan query 05:34:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:34:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:58 Parameters OK 05:34:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:58 Set A/D data flow result=40 05:34:58 Set A/D channel type result=40 05:34:58 Set A/D encoding result=40 05:34:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:58 Set channel filter=0.000000e+000 result=40 05:34:58 Config A/D Result=40 05:34:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:58 Get A/D filter: -9.255963e+061 result=40 05:34:58 Get A/D value=-858993460 result=40 05:34:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:58 Parameters OK 05:34:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:58 Set A/D data flow result=40 05:34:58 Set A/D channel type result=40 05:34:58 Set A/D encoding result=40 05:34:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:58 Set channel filter=0.000000e+000 result=40 05:34:58 Config A/D Result=40 05:34:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:58 Get A/D filter: -9.255963e+061 result=40 05:34:58 Get A/D value=-858993460 result=40 05:34:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:34:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:34:58 Aux= 05:34:58 Message to Camera, serial 95659 queued 05:35:06 Received message from Master: op=Shutter serial=95669 05:35:06 Shutter LASER close 05:35:07 Received message from Master: op=PointingHead serial=95673 05:35:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:35:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:35:07 Point started: ret=0 05:35:07 point_skyscan result=0 05:35:08 Check angles 05:35:08 SkyScan query 05:35:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 05:35:09 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 05:35:09 Check angles 05:35:09 SkyScan query 05:35:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.115<-20141 Statuses=0008 0009 05:35:09 Msec=750 True Az=112.995 Ze=-122.115 Az status=0008 Ze status=0009 05:35:10 Check angles 05:35:10 SkyScan query 05:35:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.755<-18717 Statuses=0008 0009 05:35:10 Msec=1500 True Az=112.995 Ze=-100.755 Az status=0008 Ze status=0009 05:35:10 Check angles 05:35:10 SkyScan query 05:35:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.785<-17319 Statuses=0008 0009 05:35:11 Msec=2250 True Az=112.995 Ze=-79.785 Az status=0008 Ze status=0009 05:35:11 Check angles 05:35:11 SkyScan query 05:35:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.86<-15924 Statuses=0008 0009 05:35:12 Msec=3000 True Az=112.995 Ze=-58.86 Az status=0008 Ze status=0009 05:35:12 Check angles 05:35:12 SkyScan query 05:35:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.86<-14524 Statuses=0008 0009 05:35:12 Msec=3750 True Az=112.995 Ze=-37.86 Az status=0008 Ze status=0009 05:35:13 Check angles 05:35:13 SkyScan query 05:35:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.92<-13128 Statuses=0008 0009 05:35:13 Msec=4500 True Az=112.995 Ze=-16.92 Az status=0008 Ze status=0009 05:35:13 Check angles 05:35:13 SkyScan query 05:35:14 SkyScan query done: ret=0 az=112.995<-7533 ze=4.035<-11731 Statuses=0008 0009 05:35:14 Msec=5250 True Az=112.995 Ze=4.035 Az status=0008 Ze status=0009 05:35:14 Check angles 05:35:14 SkyScan query 05:35:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:35:15 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:35:15 Message to Master queued w/err=0: serial=95673 error=0 05:35:20 Received message from Master: op=Filter serial=95674 05:35:20 Color wheel filter change from 0 to 0 05:35:20 FLIGetFilterPos err=0 currentPosition=0 05:35:20 FLIGetStepsRemaining err=0 RemainingSteps=0 05:35:20 Filter is already there-color wheel unchanged 05:35:20 Received message from Master: op=Shutter serial=95675 05:35:20 Shutter LASER close 05:35:20 Received message from Camera: op=State serial=95677 05:35:20 GetSingleValue result=40 Value=cccccccc 05:35:20 SkyScan query 05:35:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:35:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:21 Parameters OK 05:35:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:21 Set A/D data flow result=40 05:35:21 Set A/D channel type result=40 05:35:21 Set A/D encoding result=40 05:35:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:21 Set channel filter=0.000000e+000 result=40 05:35:21 Config A/D Result=40 05:35:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:21 Get A/D filter: -9.255963e+061 result=40 05:35:21 Get A/D value=-858993460 result=40 05:35:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:21 Parameters OK 05:35:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:21 Set A/D data flow result=40 05:35:21 Set A/D channel type result=40 05:35:21 Set A/D encoding result=40 05:35:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:21 Set channel filter=0.000000e+000 result=40 05:35:21 Config A/D Result=40 05:35:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:21 Get A/D filter: -9.255963e+061 result=40 05:35:21 Get A/D value=-858993460 result=40 05:35:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:35:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:35:21 Aux= 05:35:21 Message to Camera, serial 95677 queued 05:35:57 Received message from Master: op=PointingHead serial=95690 05:35:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:35:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:35:58 Point started: ret=0 05:35:58 point_skyscan result=0 05:35:58 Check angles 05:35:58 SkyScan query 05:35:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:35:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:35:59 Message to Master queued w/err=0: serial=95690 error=0 05:36:04 Received message from Master: op=Filter serial=95691 05:36:04 Color wheel filter change from 0 to 0 05:36:04 FLIGetFilterPos err=0 currentPosition=0 05:36:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:36:04 Filter is already there-color wheel unchanged 05:36:04 Received message from Master: op=Shutter serial=95692 05:36:04 Shutter LASER close 05:36:04 Received message from Camera: op=State serial=95694 05:36:04 GetSingleValue result=40 Value=cccccccc 05:36:04 SkyScan query 05:36:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:36:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:05 Parameters OK 05:36:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:05 Set A/D data flow result=40 05:36:05 Set A/D channel type result=40 05:36:05 Set A/D encoding result=40 05:36:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:05 Set channel filter=0.000000e+000 result=40 05:36:05 Config A/D Result=40 05:36:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:05 Get A/D filter: -9.255963e+061 result=40 05:36:05 Get A/D value=-858993460 result=40 05:36:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:05 Parameters OK 05:36:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:05 Set A/D data flow result=40 05:36:05 Set A/D channel type result=40 05:36:05 Set A/D encoding result=40 05:36:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:05 Set channel filter=0.000000e+000 result=40 05:36:05 Config A/D Result=40 05:36:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:05 Get A/D filter: -9.255963e+061 result=40 05:36:05 Get A/D value=-858993460 result=40 05:36:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:36:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:36:05 Aux= 05:36:05 Message to Camera, serial 95694 queued 05:36:42 Received message from Master: op=PointingHead serial=95707 05:36:42 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:36:42 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:36:42 Point started: ret=0 05:36:42 point_skyscan result=0 05:36:43 Check angles 05:36:43 SkyScan query 05:36:43 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 05:36:43 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 05:36:44 Check angles 05:36:44 SkyScan query 05:36:44 SkyScan query done: ret=0 az=153.72<-10248 ze=-6.495<-12433 Statuses=0009 0008 05:36:44 Msec=750 True Az=153.72 Ze=-6.495 Az status=0009 Ze status=0008 05:36:44 Check angles 05:36:44 SkyScan query 05:36:45 SkyScan query done: ret=0 az=171.165<-11411 ze=-6.495<-12433 Statuses=0009 0008 05:36:45 Msec=1500 True Az=171.165 Ze=-6.495 Az status=0009 Ze status=0008 05:36:45 Check angles 05:36:45 SkyScan query 05:36:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:36:46 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:36:46 Message to Master queued w/err=0: serial=95707 error=0 05:36:51 Received message from Master: op=Filter serial=95708 05:36:51 Color wheel filter change from 0 to 0 05:36:51 FLIGetFilterPos err=0 currentPosition=0 05:36:51 FLIGetStepsRemaining err=0 RemainingSteps=0 05:36:51 Filter is already there-color wheel unchanged 05:36:51 Received message from Master: op=Shutter serial=95709 05:36:51 Shutter LASER close 05:36:51 Received message from Camera: op=State serial=95711 05:36:51 GetSingleValue result=40 Value=cccccccc 05:36:51 SkyScan query 05:36:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:36:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:51 Parameters OK 05:36:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:51 Set A/D data flow result=40 05:36:51 Set A/D channel type result=40 05:36:51 Set A/D encoding result=40 05:36:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:51 Set channel filter=0.000000e+000 result=40 05:36:51 Config A/D Result=40 05:36:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:51 Get A/D filter: -9.255963e+061 result=40 05:36:51 Get A/D value=-858993460 result=40 05:36:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:51 Parameters OK 05:36:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:51 Set A/D data flow result=40 05:36:51 Set A/D channel type result=40 05:36:51 Set A/D encoding result=40 05:36:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:51 Set channel filter=0.000000e+000 result=40 05:36:51 Config A/D Result=40 05:36:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:51 Get A/D filter: -9.255963e+061 result=40 05:36:51 Get A/D value=-858993460 result=40 05:36:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:36:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:36:51 Aux= 05:36:51 Message to Camera, serial 95711 queued 05:37:28 Received message from Master: op=PointingHead serial=95724 05:37:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:37:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:37:29 Point started: ret=0 05:37:29 point_skyscan result=0 05:37:29 Check angles 05:37:29 SkyScan query 05:37:30 SkyScan query done: ret=0 az=152.79<-10186 ze=6.51<-11566 Statuses=0009 0008 05:37:30 Msec=0 True Az=152.79 Ze=6.51 Az status=0009 Ze status=0008 05:37:30 Check angles 05:37:30 SkyScan query 05:37:31 SkyScan query done: ret=0 az=135.315<-9021 ze=6.495<-11567 Statuses=0009 0008 05:37:31 Msec=750 True Az=135.315 Ze=6.495 Az status=0009 Ze status=0008 05:37:31 Check angles 05:37:31 SkyScan query 05:37:31 SkyScan query done: ret=0 az=117.84<-7856 ze=6.495<-11567 Statuses=0009 0008 05:37:31 Msec=1500 True Az=117.84 Ze=6.495 Az status=0009 Ze status=0008 05:37:32 Check angles 05:37:32 SkyScan query 05:37:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:37:32 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:37:32 Message to Master queued w/err=0: serial=95724 error=0 05:37:37 Received message from Master: op=Filter serial=95725 05:37:37 Color wheel filter change from 0 to 0 05:37:37 FLIGetFilterPos err=0 currentPosition=0 05:37:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:37 Filter is already there-color wheel unchanged 05:37:37 Received message from Master: op=Shutter serial=95726 05:37:37 Shutter LASER close 05:37:37 Received message from Camera: op=State serial=95728 05:37:37 GetSingleValue result=40 Value=cccccccc 05:37:37 SkyScan query 05:37:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:37:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:38 Parameters OK 05:37:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:38 Set A/D data flow result=40 05:37:38 Set A/D channel type result=40 05:37:38 Set A/D encoding result=40 05:37:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:38 Set channel filter=0.000000e+000 result=40 05:37:38 Config A/D Result=40 05:37:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:38 Get A/D filter: -9.255963e+061 result=40 05:37:38 Get A/D value=-858993460 result=40 05:37:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:38 Parameters OK 05:37:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:38 Set A/D data flow result=40 05:37:38 Set A/D channel type result=40 05:37:38 Set A/D encoding result=40 05:37:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:38 Set channel filter=0.000000e+000 result=40 05:37:38 Config A/D Result=40 05:37:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:38 Get A/D filter: -9.255963e+061 result=40 05:37:38 Get A/D value=-858993460 result=40 05:37:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:37:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:37:38 Aux= 05:37:38 Message to Camera, serial 95728 queued 05:38:15 Received message from Master: op=PointingHead serial=95741 05:38:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:38:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:38:15 Point started: ret=0 05:38:15 point_skyscan result=0 05:38:16 Check angles 05:38:16 SkyScan query 05:38:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 05:38:17 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 05:38:17 Check angles 05:38:17 SkyScan query 05:38:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.25<-14950 Statuses=0008 0009 05:38:17 Msec=750 True Az=112.995 Ze=-44.25 Az status=0008 Ze status=0009 05:38:18 Check angles 05:38:18 SkyScan query 05:38:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.595<-16373 Statuses=0008 0009 05:38:18 Msec=1500 True Az=112.995 Ze=-65.595 Az status=0008 Ze status=0009 05:38:18 Check angles 05:38:18 SkyScan query 05:38:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.52<-17768 Statuses=0008 0009 05:38:19 Msec=2250 True Az=112.995 Ze=-86.52 Az status=0008 Ze status=0009 05:38:19 Check angles 05:38:19 SkyScan query 05:38:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.94<-19196 Statuses=0008 0009 05:38:20 Msec=3000 True Az=112.995 Ze=-107.94 Az status=0008 Ze status=0009 05:38:20 Check angles 05:38:20 SkyScan query 05:38:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.88<-20592 Statuses=0008 0009 05:38:20 Msec=3750 True Az=112.995 Ze=-128.88 Az status=0008 Ze status=0009 05:38:21 Check angles 05:38:21 SkyScan query 05:38:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.85<-21990 Statuses=0008 0009 05:38:21 Msec=4500 True Az=112.995 Ze=-149.85 Az status=0008 Ze status=0009 05:38:21 Check angles 05:38:21 SkyScan query 05:38:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.06<-23404 Statuses=0008 0009 05:38:22 Msec=5250 True Az=112.995 Ze=-171.06 Az status=0008 Ze status=0009 05:38:22 Check angles 05:38:22 SkyScan query 05:38:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:38:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:38:23 Message to Master queued w/err=0: serial=95741 error=0 05:38:28 Received message from Master: op=Filter serial=95742 05:38:28 Color wheel filter change from 0 to 0 05:38:28 FLIGetFilterPos err=0 currentPosition=0 05:38:28 FLIGetStepsRemaining err=0 RemainingSteps=0 05:38:28 Filter is already there-color wheel unchanged 05:38:28 Received message from Master: op=Shutter serial=95743 05:38:28 Shutter LASER open 05:38:28 Received message from Camera: op=State serial=95745 05:38:28 GetSingleValue result=40 Value=cccccccc 05:38:28 SkyScan query 05:38:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:38:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:29 Parameters OK 05:38:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:29 Set A/D data flow result=40 05:38:29 Set A/D channel type result=40 05:38:29 Set A/D encoding result=40 05:38:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:29 Set channel filter=0.000000e+000 result=40 05:38:29 Config A/D Result=40 05:38:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:29 Get A/D filter: -9.255963e+061 result=40 05:38:29 Get A/D value=-858993460 result=40 05:38:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:29 Parameters OK 05:38:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:29 Set A/D data flow result=40 05:38:29 Set A/D channel type result=40 05:38:29 Set A/D encoding result=40 05:38:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:29 Set channel filter=0.000000e+000 result=40 05:38:29 Config A/D Result=40 05:38:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:29 Get A/D filter: -9.255963e+061 result=40 05:38:29 Get A/D value=-858993460 result=40 05:38:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:38:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:38:29 Aux= 05:38:29 Message to Camera, serial 95745 queued 05:38:37 Received message from Master: op=Shutter serial=95755 05:38:37 Shutter LASER close 05:38:37 Received message from Master: op=PointingHead serial=95759 05:38:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:38:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:38:38 Point started: ret=0 05:38:38 point_skyscan result=0 05:38:39 Check angles 05:38:39 SkyScan query 05:38:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.565<-21571 Statuses=0008 0009 05:38:39 Msec=0 True Az=112.995 Ze=-143.565 Az status=0008 Ze status=0009 05:38:39 Check angles 05:38:39 SkyScan query 05:38:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.115<-20141 Statuses=0008 0009 05:38:40 Msec=750 True Az=112.995 Ze=-122.115 Az status=0008 Ze status=0009 05:38:40 Check angles 05:38:40 SkyScan query 05:38:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.755<-18717 Statuses=0008 0009 05:38:41 Msec=1500 True Az=112.995 Ze=-100.755 Az status=0008 Ze status=0009 05:38:41 Check angles 05:38:41 SkyScan query 05:38:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.77<-17318 Statuses=0008 0009 05:38:41 Msec=2250 True Az=112.995 Ze=-79.77 Az status=0008 Ze status=0009 05:38:42 Check angles 05:38:42 SkyScan query 05:38:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.83<-15922 Statuses=0008 0009 05:38:42 Msec=3000 True Az=112.995 Ze=-58.83 Az status=0008 Ze status=0009 05:38:42 Check angles 05:38:42 SkyScan query 05:38:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.86<-14524 Statuses=0008 0009 05:38:43 Msec=3750 True Az=112.995 Ze=-37.86 Az status=0008 Ze status=0009 05:38:43 Check angles 05:38:43 SkyScan query 05:38:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.92<-13128 Statuses=0008 0009 05:38:44 Msec=4500 True Az=112.995 Ze=-16.92 Az status=0008 Ze status=0009 05:38:44 Check angles 05:38:44 SkyScan query 05:38:44 SkyScan query done: ret=0 az=112.995<-7533 ze=4.05<-11730 Statuses=0008 0009 05:38:44 Msec=5250 True Az=112.995 Ze=4.05 Az status=0008 Ze status=0009 05:38:45 Check angles 05:38:45 SkyScan query 05:38:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:38:45 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:38:45 Message to Master queued w/err=0: serial=95759 error=0 05:38:50 Received message from Master: op=Filter serial=95760 05:38:50 Color wheel filter change from 0 to 0 05:38:50 FLIGetFilterPos err=0 currentPosition=0 05:38:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:38:50 Filter is already there-color wheel unchanged 05:38:50 Received message from Master: op=Shutter serial=95761 05:38:50 Shutter LASER close 05:38:50 Received message from Camera: op=State serial=95763 05:38:50 GetSingleValue result=40 Value=cccccccc 05:38:50 SkyScan query 05:38:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:38:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:51 Parameters OK 05:38:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:51 Set A/D data flow result=40 05:38:51 Set A/D channel type result=40 05:38:51 Set A/D encoding result=40 05:38:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:51 Set channel filter=0.000000e+000 result=40 05:38:51 Config A/D Result=40 05:38:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:51 Get A/D filter: -9.255963e+061 result=40 05:38:51 Get A/D value=-858993460 result=40 05:38:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:51 Parameters OK 05:38:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:51 Set A/D data flow result=40 05:38:51 Set A/D channel type result=40 05:38:51 Set A/D encoding result=40 05:38:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:51 Set channel filter=0.000000e+000 result=40 05:38:51 Config A/D Result=40 05:38:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:51 Get A/D filter: -9.255963e+061 result=40 05:38:51 Get A/D value=-858993460 result=40 05:38:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:38:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:38:51 Aux= 05:38:51 Message to Camera, serial 95763 queued 05:39:28 Received message from Master: op=PointingHead serial=95776 05:39:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:39:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:39:28 Point started: ret=0 05:39:28 point_skyscan result=0 05:39:29 Check angles 05:39:29 SkyScan query 05:39:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:39:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:39:30 Message to Master queued w/err=0: serial=95776 error=0 05:39:35 Received message from Master: op=Filter serial=95777 05:39:35 Color wheel filter change from 0 to 0 05:39:35 FLIGetFilterPos err=0 currentPosition=0 05:39:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:39:35 Filter is already there-color wheel unchanged 05:39:35 Received message from Master: op=Shutter serial=95778 05:39:35 Shutter LASER close 05:39:35 Received message from Camera: op=State serial=95780 05:39:35 GetSingleValue result=40 Value=cccccccc 05:39:35 SkyScan query 05:39:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:39:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:35 Parameters OK 05:39:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:35 Set A/D data flow result=40 05:39:35 Set A/D channel type result=40 05:39:35 Set A/D encoding result=40 05:39:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:35 Set channel filter=0.000000e+000 result=40 05:39:35 Config A/D Result=40 05:39:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:35 Get A/D filter: -9.255963e+061 result=40 05:39:35 Get A/D value=-858993460 result=40 05:39:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:35 Parameters OK 05:39:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:35 Set A/D data flow result=40 05:39:35 Set A/D channel type result=40 05:39:35 Set A/D encoding result=40 05:39:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:35 Set channel filter=0.000000e+000 result=40 05:39:35 Config A/D Result=40 05:39:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:35 Get A/D filter: -9.255963e+061 result=40 05:39:35 Get A/D value=-858993460 result=40 05:39:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:39:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:39:35 Aux= 05:39:35 Message to Camera, serial 95780 queued 05:40:12 Received message from Master: op=PointingHead serial=95793 05:40:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:40:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:40:12 Point started: ret=0 05:40:12 point_skyscan result=0 05:40:13 Check angles 05:40:13 SkyScan query 05:40:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:40:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:40:14 Message to Master queued w/err=0: serial=95793 error=0 05:40:19 Received message from Master: op=Filter serial=95794 05:40:19 Color wheel filter change from 0 to 0 05:40:19 FLIGetFilterPos err=0 currentPosition=0 05:40:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:40:19 Filter is already there-color wheel unchanged 05:40:19 Received message from Master: op=Shutter serial=95795 05:40:19 Shutter LASER close 05:40:19 Received message from Camera: op=State serial=95797 05:40:19 GetSingleValue result=40 Value=cccccccc 05:40:19 SkyScan query 05:40:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:40:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:20 Parameters OK 05:40:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:20 Set A/D data flow result=40 05:40:20 Set A/D channel type result=40 05:40:20 Set A/D encoding result=40 05:40:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:20 Set channel filter=0.000000e+000 result=40 05:40:20 Config A/D Result=40 05:40:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:20 Get A/D filter: -9.255963e+061 result=40 05:40:20 Get A/D value=-858993460 result=40 05:40:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:20 Parameters OK 05:40:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:20 Set A/D data flow result=40 05:40:20 Set A/D channel type result=40 05:40:20 Set A/D encoding result=40 05:40:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:20 Set channel filter=0.000000e+000 result=40 05:40:20 Config A/D Result=40 05:40:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:20 Get A/D filter: -9.255963e+061 result=40 05:40:20 Get A/D value=-858993460 result=40 05:40:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:40:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:40:20 Aux= 05:40:20 Message to Camera, serial 95797 queued 05:40:56 Received message from Master: op=PointingHead serial=95810 05:40:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:40:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:40:57 Point started: ret=0 05:40:57 point_skyscan result=0 05:40:57 Check angles 05:40:57 SkyScan query 05:40:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:40:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:40:58 Message to Master queued w/err=0: serial=95810 error=0 05:41:03 Received message from Master: op=Filter serial=95811 05:41:03 Color wheel filter change from 0 to 0 05:41:03 FLIGetFilterPos err=0 currentPosition=0 05:41:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:41:03 Filter is already there-color wheel unchanged 05:41:03 Received message from Master: op=Shutter serial=95812 05:41:03 Shutter LASER close 05:41:03 Received message from Camera: op=State serial=95814 05:41:03 GetSingleValue result=40 Value=cccccccc 05:41:03 SkyScan query 05:41:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:41:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:04 Parameters OK 05:41:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:04 Set A/D data flow result=40 05:41:04 Set A/D channel type result=40 05:41:04 Set A/D encoding result=40 05:41:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:04 Set channel filter=0.000000e+000 result=40 05:41:04 Config A/D Result=40 05:41:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:04 Get A/D filter: -9.255963e+061 result=40 05:41:04 Get A/D value=-858993460 result=40 05:41:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:04 Parameters OK 05:41:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:04 Set A/D data flow result=40 05:41:04 Set A/D channel type result=40 05:41:04 Set A/D encoding result=40 05:41:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:04 Set channel filter=0.000000e+000 result=40 05:41:04 Config A/D Result=40 05:41:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:04 Get A/D filter: -9.255963e+061 result=40 05:41:04 Get A/D value=-858993460 result=40 05:41:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:41:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:41:04 Aux= 05:41:04 Message to Camera, serial 95814 queued 05:41:41 Received message from Master: op=PointingHead serial=95827 05:41:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:41:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:41:41 Point started: ret=0 05:41:41 point_skyscan result=0 05:41:42 Check angles 05:41:42 SkyScan query 05:41:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 05:41:42 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 05:41:43 Check angles 05:41:43 SkyScan query 05:41:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.58<-14972 Statuses=0008 0009 05:41:43 Msec=750 True Az=112.995 Ze=-44.58 Az status=0008 Ze status=0009 05:41:43 Check angles 05:41:43 SkyScan query 05:41:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.535<-16369 Statuses=0008 0009 05:41:44 Msec=1500 True Az=112.995 Ze=-65.535 Az status=0008 Ze status=0009 05:41:44 Check angles 05:41:44 SkyScan query 05:41:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 05:41:45 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 05:41:45 Check angles 05:41:45 SkyScan query 05:41:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.88<-19192 Statuses=0008 0009 05:41:45 Msec=3000 True Az=112.995 Ze=-107.88 Az status=0008 Ze status=0009 05:41:46 Check angles 05:41:46 SkyScan query 05:41:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.27<-20618 Statuses=0008 0009 05:41:46 Msec=3750 True Az=112.995 Ze=-129.27 Az status=0008 Ze status=0009 05:41:46 Check angles 05:41:46 SkyScan query 05:41:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.21<-22014 Statuses=0008 0009 05:41:47 Msec=4500 True Az=112.995 Ze=-150.21 Az status=0008 Ze status=0009 05:41:47 Check angles 05:41:47 SkyScan query 05:41:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 05:41:48 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 05:41:48 Check angles 05:41:48 SkyScan query 05:41:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:41:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:41:48 Message to Master queued w/err=0: serial=95827 error=0 05:41:53 Received message from Master: op=Filter serial=95828 05:41:53 Color wheel filter change from 0 to 0 05:41:53 FLIGetFilterPos err=0 currentPosition=0 05:41:53 FLIGetStepsRemaining err=0 RemainingSteps=0 05:41:53 Filter is already there-color wheel unchanged 05:41:54 Received message from Master: op=Shutter serial=95829 05:41:54 Shutter LASER open 05:41:54 Received message from Camera: op=State serial=95831 05:41:54 GetSingleValue result=40 Value=cccccccc 05:41:54 SkyScan query 05:41:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:41:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:54 Parameters OK 05:41:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:54 Set A/D data flow result=40 05:41:54 Set A/D channel type result=40 05:41:54 Set A/D encoding result=40 05:41:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:54 Set channel filter=0.000000e+000 result=40 05:41:54 Config A/D Result=40 05:41:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:54 Get A/D filter: -9.255963e+061 result=40 05:41:54 Get A/D value=-858993460 result=40 05:41:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:54 Parameters OK 05:41:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:54 Set A/D data flow result=40 05:41:54 Set A/D channel type result=40 05:41:54 Set A/D encoding result=40 05:41:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:54 Set channel filter=0.000000e+000 result=40 05:41:54 Config A/D Result=40 05:41:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:54 Get A/D filter: -9.255963e+061 result=40 05:41:54 Get A/D value=-858993460 result=40 05:41:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:41:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:41:54 Aux= 05:41:54 Message to Camera, serial 95831 queued 05:42:03 Received message from Master: op=Shutter serial=95841 05:42:03 Shutter LASER close 05:42:03 Received message from Master: op=PointingHead serial=95845 05:42:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:42:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:42:04 Point started: ret=0 05:42:04 point_skyscan result=0 05:42:04 Check angles 05:42:04 SkyScan query 05:42:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 05:42:05 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 05:42:05 Check angles 05:42:05 SkyScan query 05:42:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 05:42:06 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 05:42:06 Check angles 05:42:06 SkyScan query 05:42:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.935<-18729 Statuses=0008 0009 05:42:07 Msec=1500 True Az=112.995 Ze=-100.935 Az status=0008 Ze status=0009 05:42:07 Check angles 05:42:07 SkyScan query 05:42:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 05:42:07 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 05:42:07 Check angles 05:42:07 SkyScan query 05:42:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.04<-15936 Statuses=0008 0009 05:42:08 Msec=3000 True Az=112.995 Ze=-59.04 Az status=0008 Ze status=0009 05:42:08 Check angles 05:42:08 SkyScan query 05:42:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.025<-14535 Statuses=0008 0009 05:42:09 Msec=3750 True Az=112.995 Ze=-38.025 Az status=0008 Ze status=0009 05:42:09 Check angles 05:42:09 SkyScan query 05:42:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.115<-13141 Statuses=0008 0009 05:42:10 Msec=4500 True Az=112.995 Ze=-17.115 Az status=0008 Ze status=0009 05:42:10 Check angles 05:42:10 SkyScan query 05:42:10 SkyScan query done: ret=0 az=112.995<-7533 ze=3.87<-11742 Statuses=0008 0009 05:42:10 Msec=5250 True Az=112.995 Ze=3.87 Az status=0008 Ze status=0009 05:42:10 Check angles 05:42:10 SkyScan query 05:42:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:42:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:42:11 Message to Master queued w/err=0: serial=95845 error=0 05:42:16 Received message from Master: op=Filter serial=95846 05:42:16 Color wheel filter change from 0 to 0 05:42:16 FLIGetFilterPos err=0 currentPosition=0 05:42:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:42:16 Filter is already there-color wheel unchanged 05:42:16 Received message from Master: op=Shutter serial=95847 05:42:16 Shutter LASER close 05:42:16 Received message from Camera: op=State serial=95849 05:42:16 GetSingleValue result=40 Value=cccccccc 05:42:16 SkyScan query 05:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:42:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:17 Parameters OK 05:42:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:17 Set A/D data flow result=40 05:42:17 Set A/D channel type result=40 05:42:17 Set A/D encoding result=40 05:42:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:17 Set channel filter=0.000000e+000 result=40 05:42:17 Config A/D Result=40 05:42:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:17 Get A/D filter: -9.255963e+061 result=40 05:42:17 Get A/D value=-858993460 result=40 05:42:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:17 Parameters OK 05:42:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:17 Set A/D data flow result=40 05:42:17 Set A/D channel type result=40 05:42:17 Set A/D encoding result=40 05:42:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:17 Set channel filter=0.000000e+000 result=40 05:42:17 Config A/D Result=40 05:42:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:17 Get A/D filter: -9.255963e+061 result=40 05:42:17 Get A/D value=-858993460 result=40 05:42:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:42:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:42:17 Aux= 05:42:17 Message to Camera, serial 95849 queued 05:42:53 Received message from Master: op=PointingHead serial=95861 05:42:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:42:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:42:53 Point started: ret=0 05:42:53 point_skyscan result=0 05:42:54 Check angles 05:42:54 SkyScan query 05:42:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:42:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:42:55 Message to Master queued w/err=0: serial=95861 error=0 05:43:00 Received message from Master: op=Filter serial=95862 05:43:00 Color wheel filter change from 0 to 0 05:43:00 FLIGetFilterPos err=0 currentPosition=0 05:43:00 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:00 Filter is already there-color wheel unchanged 05:43:00 Received message from Master: op=Shutter serial=95863 05:43:00 Shutter LASER close 05:43:00 Received message from Camera: op=State serial=95865 05:43:00 GetSingleValue result=40 Value=cccccccc 05:43:00 SkyScan query 05:43:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:43:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:00 Parameters OK 05:43:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:00 Set A/D data flow result=40 05:43:00 Set A/D channel type result=40 05:43:00 Set A/D encoding result=40 05:43:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:00 Set channel filter=0.000000e+000 result=40 05:43:00 Config A/D Result=40 05:43:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:00 Get A/D filter: -9.255963e+061 result=40 05:43:00 Get A/D value=-858993460 result=40 05:43:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:00 Parameters OK 05:43:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:00 Set A/D data flow result=40 05:43:00 Set A/D channel type result=40 05:43:00 Set A/D encoding result=40 05:43:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:00 Set channel filter=0.000000e+000 result=40 05:43:00 Config A/D Result=40 05:43:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:00 Get A/D filter: -9.255963e+061 result=40 05:43:00 Get A/D value=-858993460 result=40 05:43:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:00 Aux= 05:43:00 Message to Camera, serial 95865 queued 05:43:37 Received message from Master: op=PointingHead serial=95878 05:43:37 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:43:37 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:43:38 Point started: ret=0 05:43:38 point_skyscan result=0 05:43:38 Check angles 05:43:38 SkyScan query 05:43:39 SkyScan query done: ret=0 az=135.885<-9059 ze=-6.51<-12434 Statuses=0009 0008 05:43:39 Msec=0 True Az=135.885 Ze=-6.51 Az status=0009 Ze status=0008 05:43:39 Check angles 05:43:39 SkyScan query 05:43:40 SkyScan query done: ret=0 az=153.705<-10247 ze=-6.495<-12433 Statuses=0009 0008 05:43:40 Msec=750 True Az=153.705 Ze=-6.495 Az status=0009 Ze status=0008 05:43:40 Check angles 05:43:40 SkyScan query 05:43:40 SkyScan query done: ret=0 az=171.615<-11441 ze=-6.495<-12433 Statuses=0009 0008 05:43:40 Msec=1500 True Az=171.615 Ze=-6.495 Az status=0009 Ze status=0008 05:43:41 Check angles 05:43:41 SkyScan query 05:43:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:43:41 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:43:41 Message to Master queued w/err=0: serial=95878 error=0 05:43:46 Received message from Master: op=Filter serial=95879 05:43:46 Color wheel filter change from 0 to 0 05:43:46 FLIGetFilterPos err=0 currentPosition=0 05:43:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:46 Filter is already there-color wheel unchanged 05:43:46 Received message from Master: op=Shutter serial=95880 05:43:46 Shutter LASER close 05:43:46 Received message from Camera: op=State serial=95882 05:43:46 GetSingleValue result=40 Value=cccccccc 05:43:46 SkyScan query 05:43:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:43:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:47 Parameters OK 05:43:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:47 Set A/D data flow result=40 05:43:47 Set A/D channel type result=40 05:43:47 Set A/D encoding result=40 05:43:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:47 Set channel filter=0.000000e+000 result=40 05:43:47 Config A/D Result=40 05:43:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:47 Get A/D filter: -9.255963e+061 result=40 05:43:47 Get A/D value=-858993460 result=40 05:43:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:47 Parameters OK 05:43:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:47 Set A/D data flow result=40 05:43:47 Set A/D channel type result=40 05:43:47 Set A/D encoding result=40 05:43:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:47 Set channel filter=0.000000e+000 result=40 05:43:47 Config A/D Result=40 05:43:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:47 Get A/D filter: -9.255963e+061 result=40 05:43:47 Get A/D value=-858993460 result=40 05:43:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:47 Aux= 05:43:47 Message to Camera, serial 95882 queued [UTC 2019-3-4 05:43:50] 05:44:24 Received message from Master: op=PointingHead serial=95895 05:44:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:44:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:44:24 Point started: ret=0 05:44:24 point_skyscan result=0 05:44:25 Check angles 05:44:25 SkyScan query 05:44:25 SkyScan query done: ret=0 az=152.805<-10187 ze=6.51<-11566 Statuses=0009 0008 05:44:25 Msec=0 True Az=152.805 Ze=6.51 Az status=0009 Ze status=0008 05:44:26 Check angles 05:44:26 SkyScan query 05:44:26 SkyScan query done: ret=0 az=135.345<-9023 ze=6.495<-11567 Statuses=0009 0008 05:44:26 Msec=750 True Az=135.345 Ze=6.495 Az status=0009 Ze status=0008 05:44:26 Check angles 05:44:26 SkyScan query 05:44:27 SkyScan query done: ret=0 az=117.87<-7858 ze=6.495<-11567 Statuses=0009 0008 05:44:27 Msec=1500 True Az=117.87 Ze=6.495 Az status=0009 Ze status=0008 05:44:27 Check angles 05:44:27 SkyScan query 05:44:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:44:28 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:44:28 Message to Master queued w/err=0: serial=95895 error=0 05:44:33 Received message from Master: op=Filter serial=95896 05:44:33 Color wheel filter change from 0 to 0 05:44:33 FLIGetFilterPos err=0 currentPosition=0 05:44:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:44:33 Filter is already there-color wheel unchanged 05:44:33 Received message from Master: op=Shutter serial=95897 05:44:33 Shutter LASER close 05:44:33 Received message from Camera: op=State serial=95899 05:44:33 GetSingleValue result=40 Value=cccccccc 05:44:33 SkyScan query 05:44:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:44:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:33 Parameters OK 05:44:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:33 Set A/D data flow result=40 05:44:33 Set A/D channel type result=40 05:44:33 Set A/D encoding result=40 05:44:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:33 Set channel filter=0.000000e+000 result=40 05:44:33 Config A/D Result=40 05:44:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:33 Get A/D filter: -9.255963e+061 result=40 05:44:33 Get A/D value=-858993460 result=40 05:44:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:33 Parameters OK 05:44:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:33 Set A/D data flow result=40 05:44:33 Set A/D channel type result=40 05:44:33 Set A/D encoding result=40 05:44:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:33 Set channel filter=0.000000e+000 result=40 05:44:33 Config A/D Result=40 05:44:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:33 Get A/D filter: -9.255963e+061 result=40 05:44:33 Get A/D value=-858993460 result=40 05:44:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:44:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:44:33 Aux= 05:44:33 Message to Camera, serial 95899 queued 05:45:10 Received message from Master: op=PointingHead serial=95912 05:45:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:45:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:45:11 Point started: ret=0 05:45:11 point_skyscan result=0 05:45:11 Check angles 05:45:11 SkyScan query 05:45:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 05:45:12 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 05:45:12 Check angles 05:45:12 SkyScan query 05:45:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.295<-14953 Statuses=0008 0009 05:45:13 Msec=750 True Az=112.995 Ze=-44.295 Az status=0008 Ze status=0009 05:45:13 Check angles 05:45:13 SkyScan query 05:45:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.205<-16347 Statuses=0008 0009 05:45:13 Msec=1500 True Az=112.995 Ze=-65.205 Az status=0008 Ze status=0009 05:45:14 Check angles 05:45:14 SkyScan query 05:45:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 05:45:14 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 05:45:14 Check angles 05:45:14 SkyScan query 05:45:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.97<-19198 Statuses=0008 0009 05:45:15 Msec=3000 True Az=112.995 Ze=-107.97 Az status=0008 Ze status=0009 05:45:15 Check angles 05:45:15 SkyScan query 05:45:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.91<-20594 Statuses=0008 0009 05:45:16 Msec=3750 True Az=112.995 Ze=-128.91 Az status=0008 Ze status=0009 05:45:16 Check angles 05:45:16 SkyScan query 05:45:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.88<-21992 Statuses=0008 0009 05:45:16 Msec=4500 True Az=112.995 Ze=-149.88 Az status=0008 Ze status=0009 05:45:17 Check angles 05:45:17 SkyScan query 05:45:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.76<-23384 Statuses=0008 0009 05:45:17 Msec=5250 True Az=112.995 Ze=-170.76 Az status=0008 Ze status=0009 05:45:17 Check angles 05:45:17 SkyScan query 05:45:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:45:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:45:18 Message to Master queued w/err=0: serial=95912 error=0 05:45:23 Received message from Master: op=Filter serial=95913 05:45:23 Color wheel filter change from 0 to 0 05:45:23 FLIGetFilterPos err=0 currentPosition=0 05:45:23 FLIGetStepsRemaining err=0 RemainingSteps=0 05:45:23 Filter is already there-color wheel unchanged 05:45:23 Received message from Master: op=Shutter serial=95914 05:45:23 Shutter LASER open 05:45:23 Received message from Camera: op=State serial=95916 05:45:23 GetSingleValue result=40 Value=cccccccc 05:45:23 SkyScan query 05:45:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:45:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:24 Parameters OK 05:45:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:24 Set A/D data flow result=40 05:45:24 Set A/D channel type result=40 05:45:24 Set A/D encoding result=40 05:45:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:24 Set channel filter=0.000000e+000 result=40 05:45:24 Config A/D Result=40 05:45:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:24 Get A/D filter: -9.255963e+061 result=40 05:45:24 Get A/D value=-858993460 result=40 05:45:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:24 Parameters OK 05:45:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:24 Set A/D data flow result=40 05:45:24 Set A/D channel type result=40 05:45:24 Set A/D encoding result=40 05:45:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:24 Set channel filter=0.000000e+000 result=40 05:45:24 Config A/D Result=40 05:45:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:24 Get A/D filter: -9.255963e+061 result=40 05:45:24 Get A/D value=-858993460 result=40 05:45:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:45:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:45:24 Aux= 05:45:24 Message to Camera, serial 95916 queued 05:45:32 Received message from Master: op=Shutter serial=95926 05:45:32 Shutter LASER close 05:45:33 Received message from Master: op=PointingHead serial=95930 05:45:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:45:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:45:33 Point started: ret=0 05:45:33 point_skyscan result=0 05:45:34 Check angles 05:45:34 SkyScan query 05:45:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 05:45:34 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 05:45:35 Check angles 05:45:35 SkyScan query 05:45:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.265<-20151 Statuses=0008 0009 05:45:35 Msec=750 True Az=112.995 Ze=-122.265 Az status=0008 Ze status=0009 05:45:35 Check angles 05:45:35 SkyScan query 05:45:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.31<-18754 Statuses=0008 0009 05:45:36 Msec=1500 True Az=112.995 Ze=-101.31 Az status=0008 Ze status=0009 05:45:36 Check angles 05:45:36 SkyScan query 05:45:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.34<-17356 Statuses=0008 0009 05:45:37 Msec=2250 True Az=112.995 Ze=-80.34 Az status=0008 Ze status=0009 05:45:37 Check angles 05:45:37 SkyScan query 05:45:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.4<-15960 Statuses=0008 0009 05:45:37 Msec=3000 True Az=112.995 Ze=-59.4 Az status=0008 Ze status=0009 05:45:38 Check angles 05:45:38 SkyScan query 05:45:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.415<-14561 Statuses=0008 0009 05:45:38 Msec=3750 True Az=112.995 Ze=-38.415 Az status=0008 Ze status=0009 05:45:38 Check angles 05:45:38 SkyScan query 05:45:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.475<-13165 Statuses=0008 0009 05:45:39 Msec=4500 True Az=112.995 Ze=-17.475 Az status=0008 Ze status=0009 05:45:39 Check angles 05:45:39 SkyScan query 05:45:40 SkyScan query done: ret=0 az=112.995<-7533 ze=3.48<-11768 Statuses=0008 0009 05:45:40 Msec=5250 True Az=112.995 Ze=3.48 Az status=0008 Ze status=0009 05:45:40 Check angles 05:45:40 SkyScan query 05:45:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:45:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:45:40 Message to Master queued w/err=0: serial=95930 error=0 05:45:45 Received message from Master: op=Filter serial=95931 05:45:45 Color wheel filter change from 0 to 0 05:45:45 FLIGetFilterPos err=0 currentPosition=0 05:45:45 FLIGetStepsRemaining err=0 RemainingSteps=0 05:45:45 Filter is already there-color wheel unchanged 05:45:46 Received message from Master: op=Shutter serial=95932 05:45:46 Shutter LASER close 05:45:46 Received message from Camera: op=State serial=95934 05:45:46 GetSingleValue result=40 Value=cccccccc 05:45:46 SkyScan query 05:45:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:45:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:46 Parameters OK 05:45:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:46 Set A/D data flow result=40 05:45:46 Set A/D channel type result=40 05:45:46 Set A/D encoding result=40 05:45:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:46 Set channel filter=0.000000e+000 result=40 05:45:46 Config A/D Result=40 05:45:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:46 Get A/D filter: -9.255963e+061 result=40 05:45:46 Get A/D value=-858993460 result=40 05:45:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:46 Parameters OK 05:45:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:46 Set A/D data flow result=40 05:45:46 Set A/D channel type result=40 05:45:46 Set A/D encoding result=40 05:45:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:46 Set channel filter=0.000000e+000 result=40 05:45:46 Config A/D Result=40 05:45:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:46 Get A/D filter: -9.255963e+061 result=40 05:45:46 Get A/D value=-858993460 result=40 05:45:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:45:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:45:46 Aux= 05:45:46 Message to Camera, serial 95934 queued 05:46:23 Received message from Master: op=PointingHead serial=95947 05:46:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:46:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:46:24 Point started: ret=0 05:46:24 point_skyscan result=0 05:46:24 Check angles 05:46:24 SkyScan query 05:46:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:46:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:46:25 Message to Master queued w/err=0: serial=95947 error=0 05:46:30 Received message from Master: op=Filter serial=95948 05:46:30 Color wheel filter change from 0 to 0 05:46:30 FLIGetFilterPos err=0 currentPosition=0 05:46:30 FLIGetStepsRemaining err=0 RemainingSteps=0 05:46:30 Filter is already there-color wheel unchanged 05:46:30 Received message from Master: op=Shutter serial=95949 05:46:30 Shutter LASER close 05:46:30 Received message from Camera: op=State serial=95951 05:46:30 GetSingleValue result=40 Value=cccccccc 05:46:30 SkyScan query 05:46:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:46:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:31 Parameters OK 05:46:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:31 Set A/D data flow result=40 05:46:31 Set A/D channel type result=40 05:46:31 Set A/D encoding result=40 05:46:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:31 Set channel filter=0.000000e+000 result=40 05:46:31 Config A/D Result=40 05:46:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:31 Get A/D filter: -9.255963e+061 result=40 05:46:31 Get A/D value=-858993460 result=40 05:46:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:31 Parameters OK 05:46:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:31 Set A/D data flow result=40 05:46:31 Set A/D channel type result=40 05:46:31 Set A/D encoding result=40 05:46:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:31 Set channel filter=0.000000e+000 result=40 05:46:31 Config A/D Result=40 05:46:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:31 Get A/D filter: -9.255963e+061 result=40 05:46:31 Get A/D value=-858993460 result=40 05:46:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:46:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:46:31 Aux= 05:46:31 Message to Camera, serial 95951 queued 05:47:07 Received message from Master: op=PointingHead serial=95964 05:47:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:47:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:47:08 Point started: ret=0 05:47:08 point_skyscan result=0 05:47:09 Check angles 05:47:09 SkyScan query 05:47:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:47:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:47:09 Message to Master queued w/err=0: serial=95964 error=0 05:47:14 Received message from Master: op=Filter serial=95965 05:47:14 Color wheel filter change from 0 to 0 05:47:14 FLIGetFilterPos err=0 currentPosition=0 05:47:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:47:14 Filter is already there-color wheel unchanged 05:47:14 Received message from Master: op=Shutter serial=95966 05:47:14 Shutter LASER close 05:47:14 Received message from Camera: op=State serial=95968 05:47:14 GetSingleValue result=40 Value=cccccccc 05:47:14 SkyScan query 05:47:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:47:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:15 Parameters OK 05:47:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:15 Set A/D data flow result=40 05:47:15 Set A/D channel type result=40 05:47:15 Set A/D encoding result=40 05:47:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:15 Set channel filter=0.000000e+000 result=40 05:47:15 Config A/D Result=40 05:47:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:15 Get A/D filter: -9.255963e+061 result=40 05:47:15 Get A/D value=-858993460 result=40 05:47:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:15 Parameters OK 05:47:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:15 Set A/D data flow result=40 05:47:15 Set A/D channel type result=40 05:47:15 Set A/D encoding result=40 05:47:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:15 Set channel filter=0.000000e+000 result=40 05:47:15 Config A/D Result=40 05:47:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:15 Get A/D filter: -9.255963e+061 result=40 05:47:15 Get A/D value=-858993460 result=40 05:47:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:47:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:47:15 Aux= 05:47:15 Message to Camera, serial 95968 queued 05:47:51 Received message from Master: op=PointingHead serial=95980 05:47:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:47:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:47:51 Point started: ret=0 05:47:51 point_skyscan result=0 05:47:52 Check angles 05:47:52 SkyScan query 05:47:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:47:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:47:53 Message to Master queued w/err=0: serial=95980 error=0 05:47:58 Received message from Master: op=Filter serial=95981 05:47:58 Color wheel filter change from 0 to 0 05:47:58 FLIGetFilterPos err=0 currentPosition=0 05:47:58 FLIGetStepsRemaining err=0 RemainingSteps=0 05:47:58 Filter is already there-color wheel unchanged 05:47:58 Received message from Master: op=Shutter serial=95982 05:47:58 Shutter LASER close 05:47:58 Received message from Camera: op=State serial=95984 05:47:58 GetSingleValue result=40 Value=cccccccc 05:47:58 SkyScan query 05:47:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:47:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:58 Parameters OK 05:47:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:58 Set A/D data flow result=40 05:47:58 Set A/D channel type result=40 05:47:58 Set A/D encoding result=40 05:47:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:58 Set channel filter=0.000000e+000 result=40 05:47:58 Config A/D Result=40 05:47:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:58 Get A/D filter: -9.255963e+061 result=40 05:47:58 Get A/D value=-858993460 result=40 05:47:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:58 Parameters OK 05:47:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:58 Set A/D data flow result=40 05:47:58 Set A/D channel type result=40 05:47:58 Set A/D encoding result=40 05:47:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:58 Set channel filter=0.000000e+000 result=40 05:47:58 Config A/D Result=40 05:47:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:58 Get A/D filter: -9.255963e+061 result=40 05:47:58 Get A/D value=-858993460 result=40 05:47:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:47:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:47:58 Aux= 05:47:58 Message to Camera, serial 95984 queued 05:48:35 Received message from Master: op=PointingHead serial=95997 05:48:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:48:35 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:48:35 Point started: ret=0 05:48:35 point_skyscan result=0 05:48:36 Check angles 05:48:36 SkyScan query 05:48:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 05:48:37 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 05:48:37 Check angles 05:48:37 SkyScan query 05:48:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 05:48:38 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 05:48:38 Check angles 05:48:38 SkyScan query 05:48:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.58<-16372 Statuses=0008 0009 05:48:38 Msec=1500 True Az=112.995 Ze=-65.58 Az status=0008 Ze status=0009 05:48:38 Check angles 05:48:38 SkyScan query 05:48:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.505<-17767 Statuses=0008 0009 05:48:39 Msec=2250 True Az=112.995 Ze=-86.505 Az status=0008 Ze status=0009 05:48:39 Check angles 05:48:39 SkyScan query 05:48:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.91<-19194 Statuses=0008 0009 05:48:40 Msec=3000 True Az=112.995 Ze=-107.91 Az status=0008 Ze status=0009 05:48:40 Check angles 05:48:40 SkyScan query 05:48:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.835<-20589 Statuses=0008 0009 05:48:41 Msec=3750 True Az=112.995 Ze=-128.835 Az status=0008 Ze status=0009 05:48:41 Check angles 05:48:41 SkyScan query 05:48:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.805<-21987 Statuses=0008 0009 05:48:41 Msec=4500 True Az=112.995 Ze=-149.805 Az status=0008 Ze status=0009 05:48:41 Check angles 05:48:41 SkyScan query 05:48:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.7<-23380 Statuses=0008 0009 05:48:42 Msec=5250 True Az=112.995 Ze=-170.7 Az status=0008 Ze status=0009 05:48:42 Check angles 05:48:42 SkyScan query 05:48:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:48:43 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:48:43 Message to Master queued w/err=0: serial=95997 error=0 05:48:48 Received message from Master: op=Filter serial=95998 05:48:48 Color wheel filter change from 0 to 0 05:48:48 FLIGetFilterPos err=0 currentPosition=0 05:48:48 FLIGetStepsRemaining err=0 RemainingSteps=0 05:48:48 Filter is already there-color wheel unchanged 05:48:48 Received message from Master: op=Shutter serial=95999 05:48:48 Shutter LASER open 05:48:48 Received message from Camera: op=State serial=96001 05:48:48 GetSingleValue result=40 Value=cccccccc 05:48:48 SkyScan query 05:48:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:48:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:49 Parameters OK 05:48:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:49 Set A/D data flow result=40 05:48:49 Set A/D channel type result=40 05:48:49 Set A/D encoding result=40 05:48:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:49 Set channel filter=0.000000e+000 result=40 05:48:49 Config A/D Result=40 05:48:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:49 Get A/D filter: -9.255963e+061 result=40 05:48:49 Get A/D value=-858993460 result=40 05:48:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:49 Parameters OK 05:48:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:49 Set A/D data flow result=40 05:48:49 Set A/D channel type result=40 05:48:49 Set A/D encoding result=40 05:48:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:49 Set channel filter=0.000000e+000 result=40 05:48:49 Config A/D Result=40 05:48:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:49 Get A/D filter: -9.255963e+061 result=40 05:48:49 Get A/D value=-858993460 result=40 05:48:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:49 Aux= 05:48:49 Message to Camera, serial 96001 queued 05:48:57 Received message from Master: op=Shutter serial=96011 05:48:57 Shutter LASER close 05:48:58 Received message from Master: op=PointingHead serial=96015 05:48:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:48:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:48:58 Point started: ret=0 05:48:58 point_skyscan result=0 05:48:59 Check angles 05:48:59 SkyScan query 05:48:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 05:48:59 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 05:49:00 Check angles 05:49:00 SkyScan query 05:49:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.265<-20151 Statuses=0008 0009 05:49:00 Msec=750 True Az=112.995 Ze=-122.265 Az status=0008 Ze status=0009 05:49:00 Check angles 05:49:00 SkyScan query 05:49:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.325<-18755 Statuses=0008 0009 05:49:01 Msec=1500 True Az=112.995 Ze=-101.325 Az status=0008 Ze status=0009 05:49:01 Check angles 05:49:01 SkyScan query 05:49:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.935<-17329 Statuses=0008 0009 05:49:02 Msec=2250 True Az=112.995 Ze=-79.935 Az status=0008 Ze status=0009 05:49:02 Check angles 05:49:02 SkyScan query 05:49:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.98<-15932 Statuses=0008 0009 05:49:02 Msec=3000 True Az=112.995 Ze=-58.98 Az status=0008 Ze status=0009 05:49:03 Check angles 05:49:03 SkyScan query 05:49:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.98<-14532 Statuses=0008 0009 05:49:03 Msec=3750 True Az=112.995 Ze=-37.98 Az status=0008 Ze status=0009 05:49:03 Check angles 05:49:03 SkyScan query 05:49:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.055<-13137 Statuses=0008 0009 05:49:04 Msec=4500 True Az=112.995 Ze=-17.055 Az status=0008 Ze status=0009 05:49:04 Check angles 05:49:04 SkyScan query 05:49:05 SkyScan query done: ret=0 az=112.995<-7533 ze=3.915<-11739 Statuses=0008 0009 05:49:05 Msec=5250 True Az=112.995 Ze=3.915 Az status=0008 Ze status=0009 05:49:05 Check angles 05:49:05 SkyScan query 05:49:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:49:05 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:49:05 Message to Master queued w/err=0: serial=96015 error=0 05:49:10 Received message from Master: op=Filter serial=96016 05:49:10 Color wheel filter change from 0 to 0 05:49:10 FLIGetFilterPos err=0 currentPosition=0 05:49:10 FLIGetStepsRemaining err=0 RemainingSteps=0 05:49:10 Filter is already there-color wheel unchanged 05:49:11 Received message from Master: op=Shutter serial=96017 05:49:11 Shutter LASER close 05:49:11 Received message from Camera: op=State serial=96019 05:49:11 GetSingleValue result=40 Value=cccccccc 05:49:11 SkyScan query 05:49:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:49:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:11 Parameters OK 05:49:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:11 Set A/D data flow result=40 05:49:11 Set A/D channel type result=40 05:49:11 Set A/D encoding result=40 05:49:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:11 Set channel filter=0.000000e+000 result=40 05:49:11 Config A/D Result=40 05:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:11 Get A/D filter: -9.255963e+061 result=40 05:49:11 Get A/D value=-858993460 result=40 05:49:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:11 Parameters OK 05:49:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:11 Set A/D data flow result=40 05:49:11 Set A/D channel type result=40 05:49:11 Set A/D encoding result=40 05:49:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:11 Set channel filter=0.000000e+000 result=40 05:49:11 Config A/D Result=40 05:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:11 Get A/D filter: -9.255963e+061 result=40 05:49:11 Get A/D value=-858993460 result=40 05:49:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:49:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:49:11 Aux= 05:49:11 Message to Camera, serial 96019 queued 05:49:48 Received message from Master: op=PointingHead serial=96032 05:49:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:49:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:49:49 Point started: ret=0 05:49:49 point_skyscan result=0 05:49:49 Check angles 05:49:49 SkyScan query 05:49:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:49:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:49:50 Message to Master queued w/err=0: serial=96032 error=0 05:49:55 Received message from Master: op=Filter serial=96033 05:49:55 Color wheel filter change from 0 to 0 05:49:55 FLIGetFilterPos err=0 currentPosition=0 05:49:55 FLIGetStepsRemaining err=0 RemainingSteps=0 05:49:55 Filter is already there-color wheel unchanged 05:49:55 Received message from Master: op=Shutter serial=96034 05:49:55 Shutter LASER close 05:49:55 Received message from Camera: op=State serial=96036 05:49:55 GetSingleValue result=40 Value=cccccccc 05:49:55 SkyScan query 05:49:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:49:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:56 Parameters OK 05:49:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:56 Set A/D data flow result=40 05:49:56 Set A/D channel type result=40 05:49:56 Set A/D encoding result=40 05:49:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:56 Set channel filter=0.000000e+000 result=40 05:49:56 Config A/D Result=40 05:49:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:56 Get A/D filter: -9.255963e+061 result=40 05:49:56 Get A/D value=-858993460 result=40 05:49:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:56 Parameters OK 05:49:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:56 Set A/D data flow result=40 05:49:56 Set A/D channel type result=40 05:49:56 Set A/D encoding result=40 05:49:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:56 Set channel filter=0.000000e+000 result=40 05:49:56 Config A/D Result=40 05:49:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:56 Get A/D filter: -9.255963e+061 result=40 05:49:56 Get A/D value=-858993460 result=40 05:49:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:49:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:49:56 Aux= 05:49:56 Message to Camera, serial 96036 queued 05:50:32 Received message from Master: op=PointingHead serial=96049 05:50:32 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:50:32 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:50:33 Point started: ret=0 05:50:33 point_skyscan result=0 05:50:34 Check angles 05:50:34 SkyScan query 05:50:34 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 05:50:34 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 05:50:34 Check angles 05:50:34 SkyScan query 05:50:35 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.495<-12433 Statuses=0009 0008 05:50:35 Msec=750 True Az=153.93 Ze=-6.495 Az status=0009 Ze status=0008 05:50:35 Check angles 05:50:35 SkyScan query 05:50:36 SkyScan query done: ret=0 az=171.375<-11425 ze=-6.495<-12433 Statuses=0009 0008 05:50:36 Msec=1500 True Az=171.375 Ze=-6.495 Az status=0009 Ze status=0008 05:50:36 Check angles 05:50:36 SkyScan query 05:50:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:50:36 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:50:36 Message to Master queued w/err=0: serial=96049 error=0 05:50:41 Received message from Master: op=Filter serial=96050 05:50:41 Color wheel filter change from 0 to 0 05:50:41 FLIGetFilterPos err=0 currentPosition=0 05:50:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:41 Filter is already there-color wheel unchanged 05:50:42 Received message from Master: op=Shutter serial=96051 05:50:42 Shutter LASER close 05:50:42 Received message from Camera: op=State serial=96053 05:50:42 GetSingleValue result=40 Value=cccccccc 05:50:42 SkyScan query 05:50:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:50:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:42 Parameters OK 05:50:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:42 Set A/D data flow result=40 05:50:42 Set A/D channel type result=40 05:50:42 Set A/D encoding result=40 05:50:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:42 Set channel filter=0.000000e+000 result=40 05:50:42 Config A/D Result=40 05:50:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:42 Get A/D filter: -9.255963e+061 result=40 05:50:42 Get A/D value=-858993460 result=40 05:50:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:42 Parameters OK 05:50:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:42 Set A/D data flow result=40 05:50:42 Set A/D channel type result=40 05:50:42 Set A/D encoding result=40 05:50:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:42 Set channel filter=0.000000e+000 result=40 05:50:42 Config A/D Result=40 05:50:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:42 Get A/D filter: -9.255963e+061 result=40 05:50:42 Get A/D value=-858993460 result=40 05:50:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:50:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:50:42 Aux= 05:50:42 Message to Camera, serial 96053 queued 05:51:19 Received message from Master: op=PointingHead serial=96066 05:51:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:51:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:51:19 Point started: ret=0 05:51:19 point_skyscan result=0 05:51:20 Check angles 05:51:20 SkyScan query 05:51:21 SkyScan query done: ret=0 az=152.82<-10188 ze=6.51<-11566 Statuses=0009 0008 05:51:21 Msec=0 True Az=152.82 Ze=6.51 Az status=0009 Ze status=0008 05:51:21 Check angles 05:51:21 SkyScan query 05:51:21 SkyScan query done: ret=0 az=135<-9000 ze=6.495<-11567 Statuses=0009 0008 05:51:21 Msec=750 True Az=135 Ze=6.495 Az status=0009 Ze status=0008 05:51:22 Check angles 05:51:22 SkyScan query 05:51:22 SkyScan query done: ret=0 az=117.585<-7839 ze=6.495<-11567 Statuses=0009 0008 05:51:22 Msec=1500 True Az=117.585 Ze=6.495 Az status=0009 Ze status=0008 05:51:22 Check angles 05:51:22 SkyScan query 05:51:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:51:23 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:51:23 Message to Master queued w/err=0: serial=96066 error=0 05:51:28 Received message from Master: op=Filter serial=96067 05:51:28 Color wheel filter change from 0 to 0 05:51:28 FLIGetFilterPos err=0 currentPosition=0 05:51:28 FLIGetStepsRemaining err=0 RemainingSteps=0 05:51:28 Filter is already there-color wheel unchanged 05:51:28 Received message from Master: op=Shutter serial=96068 05:51:28 Shutter LASER close 05:51:28 Received message from Camera: op=State serial=96070 05:51:28 GetSingleValue result=40 Value=cccccccc 05:51:28 SkyScan query 05:51:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:51:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:29 Parameters OK 05:51:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:29 Set A/D data flow result=40 05:51:29 Set A/D channel type result=40 05:51:29 Set A/D encoding result=40 05:51:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:29 Set channel filter=0.000000e+000 result=40 05:51:29 Config A/D Result=40 05:51:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:29 Get A/D filter: -9.255963e+061 result=40 05:51:29 Get A/D value=-858993460 result=40 05:51:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:29 Parameters OK 05:51:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:29 Set A/D data flow result=40 05:51:29 Set A/D channel type result=40 05:51:29 Set A/D encoding result=40 05:51:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:29 Set channel filter=0.000000e+000 result=40 05:51:29 Config A/D Result=40 05:51:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:29 Get A/D filter: -9.255963e+061 result=40 05:51:29 Get A/D value=-858993460 result=40 05:51:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:51:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:51:29 Aux= 05:51:29 Message to Camera, serial 96070 queued 05:52:06 Received message from Master: op=PointingHead serial=96083 05:52:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:52:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:52:06 Point started: ret=0 05:52:06 point_skyscan result=0 05:52:07 Check angles 05:52:07 SkyScan query 05:52:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 05:52:07 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 05:52:08 Check angles 05:52:08 SkyScan query 05:52:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.045<-15003 Statuses=0008 0009 05:52:08 Msec=750 True Az=112.995 Ze=-45.045 Az status=0008 Ze status=0009 05:52:08 Check angles 05:52:08 SkyScan query 05:52:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.03<-16402 Statuses=0008 0009 05:52:09 Msec=1500 True Az=112.995 Ze=-66.03 Az status=0008 Ze status=0009 05:52:09 Check angles 05:52:09 SkyScan query 05:52:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.97<-17798 Statuses=0008 0009 05:52:10 Msec=2250 True Az=112.995 Ze=-86.97 Az status=0008 Ze status=0009 05:52:10 Check angles 05:52:10 SkyScan query 05:52:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.36<-19224 Statuses=0008 0009 05:52:10 Msec=3000 True Az=112.995 Ze=-108.36 Az status=0008 Ze status=0009 05:52:11 Check angles 05:52:11 SkyScan query 05:52:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.78<-20652 Statuses=0008 0009 05:52:11 Msec=3750 True Az=112.995 Ze=-129.78 Az status=0008 Ze status=0009 05:52:11 Check angles 05:52:11 SkyScan query 05:52:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.705<-22047 Statuses=0008 0009 05:52:12 Msec=4500 True Az=112.995 Ze=-150.705 Az status=0008 Ze status=0009 05:52:12 Check angles 05:52:12 SkyScan query 05:52:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.42<-23428 Statuses=0008 0009 05:52:13 Msec=5250 True Az=112.995 Ze=-171.42 Az status=0008 Ze status=0009 05:52:13 Check angles 05:52:13 SkyScan query 05:52:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:52:13 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:52:13 Message to Master queued w/err=0: serial=96083 error=0 05:52:18 Received message from Master: op=Filter serial=96084 05:52:18 Color wheel filter change from 0 to 0 05:52:18 FLIGetFilterPos err=0 currentPosition=0 05:52:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:52:18 Filter is already there-color wheel unchanged 05:52:19 Received message from Master: op=Shutter serial=96085 05:52:19 Shutter LASER open 05:52:19 Received message from Camera: op=State serial=96087 05:52:19 GetSingleValue result=40 Value=cccccccc 05:52:19 SkyScan query 05:52:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:52:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:19 Parameters OK 05:52:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:19 Set A/D data flow result=40 05:52:19 Set A/D channel type result=40 05:52:19 Set A/D encoding result=40 05:52:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:19 Set channel filter=0.000000e+000 result=40 05:52:19 Config A/D Result=40 05:52:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:19 Get A/D filter: -9.255963e+061 result=40 05:52:19 Get A/D value=-858993460 result=40 05:52:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:19 Parameters OK 05:52:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:19 Set A/D data flow result=40 05:52:19 Set A/D channel type result=40 05:52:19 Set A/D encoding result=40 05:52:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:19 Set channel filter=0.000000e+000 result=40 05:52:19 Config A/D Result=40 05:52:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:19 Get A/D filter: -9.255963e+061 result=40 05:52:19 Get A/D value=-858993460 result=40 05:52:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:52:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:52:19 Aux= 05:52:19 Message to Camera, serial 96087 queued 05:52:28 Received message from Master: op=Shutter serial=96097 05:52:28 Shutter LASER close 05:52:28 Received message from Master: op=PointingHead serial=96101 05:52:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:52:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:52:29 Point started: ret=0 05:52:29 point_skyscan result=0 05:52:29 Check angles 05:52:29 SkyScan query 05:52:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.115<-21541 Statuses=0008 0009 05:52:30 Msec=0 True Az=112.995 Ze=-143.115 Az status=0008 Ze status=0009 05:52:30 Check angles 05:52:30 SkyScan query 05:52:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.16<-20144 Statuses=0008 0009 05:52:31 Msec=750 True Az=112.995 Ze=-122.16 Az status=0008 Ze status=0009 05:52:31 Check angles 05:52:31 SkyScan query 05:52:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.22<-18748 Statuses=0008 0009 05:52:31 Msec=1500 True Az=112.995 Ze=-101.22 Az status=0008 Ze status=0009 05:52:32 Check angles 05:52:32 SkyScan query 05:52:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.25<-17350 Statuses=0008 0009 05:52:32 Msec=2250 True Az=112.995 Ze=-80.25 Az status=0008 Ze status=0009 05:52:32 Check angles 05:52:32 SkyScan query 05:52:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.31<-15954 Statuses=0008 0009 05:52:33 Msec=3000 True Az=112.995 Ze=-59.31 Az status=0008 Ze status=0009 05:52:33 Check angles 05:52:33 SkyScan query 05:52:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.325<-14555 Statuses=0008 0009 05:52:34 Msec=3750 True Az=112.995 Ze=-38.325 Az status=0008 Ze status=0009 05:52:34 Check angles 05:52:34 SkyScan query 05:52:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.385<-13159 Statuses=0008 0009 05:52:34 Msec=4500 True Az=112.995 Ze=-17.385 Az status=0008 Ze status=0009 05:52:35 Check angles 05:52:35 SkyScan query 05:52:35 SkyScan query done: ret=0 az=112.995<-7533 ze=3.57<-11762 Statuses=0008 0009 05:52:35 Msec=5250 True Az=112.995 Ze=3.57 Az status=0008 Ze status=0009 05:52:35 Check angles 05:52:35 SkyScan query 05:52:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:52:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:52:36 Message to Master queued w/err=0: serial=96101 error=0 05:52:41 Received message from Master: op=Filter serial=96102 05:52:41 Color wheel filter change from 0 to 0 05:52:41 FLIGetFilterPos err=0 currentPosition=0 05:52:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:52:41 Filter is already there-color wheel unchanged 05:52:41 Received message from Master: op=Shutter serial=96103 05:52:41 Shutter LASER close 05:52:41 Received message from Camera: op=State serial=96105 05:52:41 GetSingleValue result=40 Value=cccccccc 05:52:41 SkyScan query 05:52:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:52:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:42 Parameters OK 05:52:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:42 Set A/D data flow result=40 05:52:42 Set A/D channel type result=40 05:52:42 Set A/D encoding result=40 05:52:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:42 Set channel filter=0.000000e+000 result=40 05:52:42 Config A/D Result=40 05:52:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:42 Get A/D filter: -9.255963e+061 result=40 05:52:42 Get A/D value=-858993460 result=40 05:52:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:42 Parameters OK 05:52:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:42 Set A/D data flow result=40 05:52:42 Set A/D channel type result=40 05:52:42 Set A/D encoding result=40 05:52:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:42 Set channel filter=0.000000e+000 result=40 05:52:42 Config A/D Result=40 05:52:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:42 Get A/D filter: -9.255963e+061 result=40 05:52:42 Get A/D value=-858993460 result=40 05:52:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:52:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:52:42 Aux= 05:52:42 Message to Camera, serial 96105 queued 05:53:19 Received message from Master: op=PointingHead serial=96118 05:53:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:53:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:53:19 Point started: ret=0 05:53:19 point_skyscan result=0 05:53:20 Check angles 05:53:20 SkyScan query 05:53:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:53:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:53:20 Message to Master queued w/err=0: serial=96118 error=0 05:53:25 Received message from Master: op=Filter serial=96119 05:53:25 Color wheel filter change from 0 to 0 05:53:25 FLIGetFilterPos err=0 currentPosition=0 05:53:25 FLIGetStepsRemaining err=0 RemainingSteps=0 05:53:25 Filter is already there-color wheel unchanged 05:53:25 Received message from Master: op=Shutter serial=96120 05:53:25 Shutter LASER close 05:53:26 Received message from Camera: op=State serial=96122 05:53:26 GetSingleValue result=40 Value=cccccccc 05:53:26 SkyScan query 05:53:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:53:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:26 Parameters OK 05:53:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:26 Set A/D data flow result=40 05:53:26 Set A/D channel type result=40 05:53:26 Set A/D encoding result=40 05:53:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:26 Set channel filter=0.000000e+000 result=40 05:53:26 Config A/D Result=40 05:53:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:26 Get A/D filter: -9.255963e+061 result=40 05:53:26 Get A/D value=-858993460 result=40 05:53:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:26 Parameters OK 05:53:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:26 Set A/D data flow result=40 05:53:26 Set A/D channel type result=40 05:53:26 Set A/D encoding result=40 05:53:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:26 Set channel filter=0.000000e+000 result=40 05:53:26 Config A/D Result=40 05:53:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:26 Get A/D filter: -9.255963e+061 result=40 05:53:26 Get A/D value=-858993460 result=40 05:53:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:53:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:53:26 Aux= 05:53:26 Message to Camera, serial 96122 queued 05:54:03 Received message from Master: op=PointingHead serial=96135 05:54:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:54:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:54:03 Point started: ret=0 05:54:03 point_skyscan result=0 05:54:04 Check angles 05:54:04 SkyScan query 05:54:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:54:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:54:05 Message to Master queued w/err=0: serial=96135 error=0 05:54:10 Received message from Master: op=Filter serial=96136 05:54:10 Color wheel filter change from 0 to 0 05:54:10 FLIGetFilterPos err=0 currentPosition=0 05:54:10 FLIGetStepsRemaining err=0 RemainingSteps=0 05:54:10 Filter is already there-color wheel unchanged 05:54:10 Received message from Master: op=Shutter serial=96137 05:54:10 Shutter LASER close 05:54:10 Received message from Camera: op=State serial=96139 05:54:10 GetSingleValue result=40 Value=cccccccc 05:54:10 SkyScan query 05:54:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:54:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:10 Parameters OK 05:54:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:10 Set A/D data flow result=40 05:54:10 Set A/D channel type result=40 05:54:10 Set A/D encoding result=40 05:54:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:10 Set channel filter=0.000000e+000 result=40 05:54:10 Config A/D Result=40 05:54:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:10 Get A/D filter: -9.255963e+061 result=40 05:54:10 Get A/D value=-858993460 result=40 05:54:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:10 Parameters OK 05:54:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:10 Set A/D data flow result=40 05:54:10 Set A/D channel type result=40 05:54:10 Set A/D encoding result=40 05:54:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:10 Set channel filter=0.000000e+000 result=40 05:54:10 Config A/D Result=40 05:54:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:10 Get A/D filter: -9.255963e+061 result=40 05:54:10 Get A/D value=-858993460 result=40 05:54:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:54:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:54:10 Aux= 05:54:10 Message to Camera, serial 96139 queued [UTC 2019-3-4 05:54:47] 05:54:47 Received message from Master: op=PointingHead serial=96152 05:54:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:54:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:54:48 Point started: ret=0 05:54:48 point_skyscan result=0 05:54:48 Check angles 05:54:48 SkyScan query 05:54:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:54:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:54:49 Message to Master queued w/err=0: serial=96152 error=0 05:54:54 Received message from Master: op=Filter serial=96153 05:54:54 Color wheel filter change from 0 to 0 05:54:54 FLIGetFilterPos err=0 currentPosition=0 05:54:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:54:54 Filter is already there-color wheel unchanged 05:54:54 Received message from Master: op=Shutter serial=96154 05:54:54 Shutter LASER close 05:54:54 Received message from Camera: op=State serial=96156 05:54:54 GetSingleValue result=40 Value=cccccccc 05:54:54 SkyScan query 05:54:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:54:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:55 Parameters OK 05:54:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:55 Set A/D data flow result=40 05:54:55 Set A/D channel type result=40 05:54:55 Set A/D encoding result=40 05:54:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:55 Set channel filter=0.000000e+000 result=40 05:54:55 Config A/D Result=40 05:54:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:55 Get A/D filter: -9.255963e+061 result=40 05:54:55 Get A/D value=-858993460 result=40 05:54:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:55 Parameters OK 05:54:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:55 Set A/D data flow result=40 05:54:55 Set A/D channel type result=40 05:54:55 Set A/D encoding result=40 05:54:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:55 Set channel filter=0.000000e+000 result=40 05:54:55 Config A/D Result=40 05:54:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:55 Get A/D filter: -9.255963e+061 result=40 05:54:55 Get A/D value=-858993460 result=40 05:54:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:54:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:54:55 Aux= 05:54:55 Message to Camera, serial 96156 queued 05:55:32 Received message from Master: op=PointingHead serial=96169 05:55:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:55:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:55:32 Point started: ret=0 05:55:32 point_skyscan result=0 05:55:33 Check angles 05:55:33 SkyScan query 05:55:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 05:55:33 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 05:55:33 Check angles 05:55:33 SkyScan query 05:55:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 05:55:34 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 05:55:34 Check angles 05:55:34 SkyScan query 05:55:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.205<-16347 Statuses=0008 0009 05:55:35 Msec=1500 True Az=112.995 Ze=-65.205 Az status=0008 Ze status=0009 05:55:35 Check angles 05:55:35 SkyScan query 05:55:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.55<-17770 Statuses=0008 0009 05:55:36 Msec=2250 True Az=112.995 Ze=-86.55 Az status=0008 Ze status=0009 05:55:36 Check angles 05:55:36 SkyScan query 05:55:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.535<-19169 Statuses=0008 0009 05:55:36 Msec=3000 True Az=112.995 Ze=-107.535 Az status=0008 Ze status=0009 05:55:36 Check angles 05:55:36 SkyScan query 05:55:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.895<-20593 Statuses=0008 0009 05:55:37 Msec=3750 True Az=112.995 Ze=-128.895 Az status=0008 Ze status=0009 05:55:37 Check angles 05:55:37 SkyScan query 05:55:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.865<-21991 Statuses=0008 0009 05:55:38 Msec=4500 True Az=112.995 Ze=-149.865 Az status=0008 Ze status=0009 05:55:38 Check angles 05:55:38 SkyScan query 05:55:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.745<-23383 Statuses=0008 0009 05:55:39 Msec=5250 True Az=112.995 Ze=-170.745 Az status=0008 Ze status=0009 05:55:39 Check angles 05:55:39 SkyScan query 05:55:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:55:39 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:55:39 Message to Master queued w/err=0: serial=96169 error=0 05:55:44 Received message from Master: op=Filter serial=96170 05:55:44 Color wheel filter change from 0 to 0 05:55:44 FLIGetFilterPos err=0 currentPosition=0 05:55:44 FLIGetStepsRemaining err=0 RemainingSteps=0 05:55:44 Filter is already there-color wheel unchanged 05:55:44 Received message from Master: op=Shutter serial=96171 05:55:44 Shutter LASER open 05:55:45 Received message from Camera: op=State serial=96173 05:55:45 GetSingleValue result=40 Value=cccccccc 05:55:45 SkyScan query 05:55:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:55:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:45 Parameters OK 05:55:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:45 Set A/D data flow result=40 05:55:45 Set A/D channel type result=40 05:55:45 Set A/D encoding result=40 05:55:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:45 Set channel filter=0.000000e+000 result=40 05:55:45 Config A/D Result=40 05:55:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:45 Get A/D filter: -9.255963e+061 result=40 05:55:45 Get A/D value=-858993460 result=40 05:55:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:45 Parameters OK 05:55:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:45 Set A/D data flow result=40 05:55:45 Set A/D channel type result=40 05:55:45 Set A/D encoding result=40 05:55:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:45 Set channel filter=0.000000e+000 result=40 05:55:45 Config A/D Result=40 05:55:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:45 Get A/D filter: -9.255963e+061 result=40 05:55:45 Get A/D value=-858993460 result=40 05:55:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:45 Aux= 05:55:45 Message to Camera, serial 96173 queued 05:55:54 Received message from Master: op=Shutter serial=96183 05:55:54 Shutter LASER close 05:55:54 Received message from Master: op=PointingHead serial=96187 05:55:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:55:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:55:55 Point started: ret=0 05:55:55 point_skyscan result=0 05:55:55 Check angles 05:55:55 SkyScan query 05:55:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 05:55:56 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 05:55:56 Check angles 05:55:56 SkyScan query 05:55:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.25<-20150 Statuses=0008 0009 05:55:57 Msec=750 True Az=112.995 Ze=-122.25 Az status=0008 Ze status=0009 05:55:57 Check angles 05:55:57 SkyScan query 05:55:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.28<-18752 Statuses=0008 0009 05:55:57 Msec=1500 True Az=112.995 Ze=-101.28 Az status=0008 Ze status=0009 05:55:58 Check angles 05:55:58 SkyScan query 05:55:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.325<-17355 Statuses=0008 0009 05:55:58 Msec=2250 True Az=112.995 Ze=-80.325 Az status=0008 Ze status=0009 05:55:58 Check angles 05:55:58 SkyScan query 05:55:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.37<-15958 Statuses=0008 0009 05:55:59 Msec=3000 True Az=112.995 Ze=-59.37 Az status=0008 Ze status=0009 05:55:59 Check angles 05:55:59 SkyScan query 05:56:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.4<-14560 Statuses=0008 0009 05:56:00 Msec=3750 True Az=112.995 Ze=-38.4 Az status=0008 Ze status=0009 05:56:00 Check angles 05:56:00 SkyScan query 05:56:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.46<-13164 Statuses=0008 0009 05:56:00 Msec=4500 True Az=112.995 Ze=-17.46 Az status=0008 Ze status=0009 05:56:01 Check angles 05:56:01 SkyScan query 05:56:01 SkyScan query done: ret=0 az=112.995<-7533 ze=3.96<-11736 Statuses=0008 0009 05:56:01 Msec=5250 True Az=112.995 Ze=3.96 Az status=0008 Ze status=0009 05:56:01 Check angles 05:56:01 SkyScan query 05:56:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:56:02 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:56:02 Message to Master queued w/err=0: serial=96187 error=0 05:56:07 Received message from Master: op=Filter serial=96188 05:56:07 Color wheel filter change from 0 to 0 05:56:07 FLIGetFilterPos err=0 currentPosition=0 05:56:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:56:07 Filter is already there-color wheel unchanged 05:56:07 Received message from Master: op=Shutter serial=96189 05:56:07 Shutter LASER close 05:56:07 Received message from Camera: op=State serial=96191 05:56:07 GetSingleValue result=40 Value=cccccccc 05:56:07 SkyScan query 05:56:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:56:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:08 Parameters OK 05:56:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:08 Set A/D data flow result=40 05:56:08 Set A/D channel type result=40 05:56:08 Set A/D encoding result=40 05:56:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:08 Set channel filter=0.000000e+000 result=40 05:56:08 Config A/D Result=40 05:56:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:08 Get A/D filter: -9.255963e+061 result=40 05:56:08 Get A/D value=-858993460 result=40 05:56:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:08 Parameters OK 05:56:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:08 Set A/D data flow result=40 05:56:08 Set A/D channel type result=40 05:56:08 Set A/D encoding result=40 05:56:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:08 Set channel filter=0.000000e+000 result=40 05:56:08 Config A/D Result=40 05:56:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:08 Get A/D filter: -9.255963e+061 result=40 05:56:08 Get A/D value=-858993460 result=40 05:56:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:56:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:56:08 Aux= 05:56:08 Message to Camera, serial 96191 queued 05:56:44 Received message from Master: op=PointingHead serial=96203 05:56:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:56:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:56:44 Point started: ret=0 05:56:44 point_skyscan result=0 05:56:45 Check angles 05:56:45 SkyScan query 05:56:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:56:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:56:45 Message to Master queued w/err=0: serial=96203 error=0 05:56:50 Received message from Master: op=Filter serial=96204 05:56:50 Color wheel filter change from 0 to 0 05:56:50 FLIGetFilterPos err=0 currentPosition=0 05:56:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:56:50 Filter is already there-color wheel unchanged 05:56:51 Received message from Master: op=Shutter serial=96205 05:56:51 Shutter LASER close 05:56:51 Received message from Camera: op=State serial=96207 05:56:51 GetSingleValue result=40 Value=cccccccc 05:56:51 SkyScan query 05:56:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:56:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:51 Parameters OK 05:56:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:51 Set A/D data flow result=40 05:56:51 Set A/D channel type result=40 05:56:51 Set A/D encoding result=40 05:56:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:51 Set channel filter=0.000000e+000 result=40 05:56:51 Config A/D Result=40 05:56:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:51 Get A/D filter: -9.255963e+061 result=40 05:56:51 Get A/D value=-858993460 result=40 05:56:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:51 Parameters OK 05:56:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:51 Set A/D data flow result=40 05:56:51 Set A/D channel type result=40 05:56:51 Set A/D encoding result=40 05:56:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:51 Set channel filter=0.000000e+000 result=40 05:56:51 Config A/D Result=40 05:56:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:51 Get A/D filter: -9.255963e+061 result=40 05:56:51 Get A/D value=-858993460 result=40 05:56:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:56:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:56:51 Aux= 05:56:51 Message to Camera, serial 96207 queued 05:57:28 Received message from Master: op=PointingHead serial=96220 05:57:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:57:28 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:57:28 Point started: ret=0 05:57:28 point_skyscan result=0 05:57:29 Check angles 05:57:29 SkyScan query 05:57:30 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 05:57:30 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 05:57:30 Check angles 05:57:30 SkyScan query 05:57:30 SkyScan query done: ret=0 az=153.795<-10253 ze=-6.495<-12433 Statuses=0009 0008 05:57:30 Msec=750 True Az=153.795 Ze=-6.495 Az status=0009 Ze status=0008 05:57:31 Check angles 05:57:31 SkyScan query 05:57:31 SkyScan query done: ret=0 az=171.315<-11421 ze=-6.495<-12433 Statuses=0009 0008 05:57:31 Msec=1500 True Az=171.315 Ze=-6.495 Az status=0009 Ze status=0008 05:57:31 Check angles 05:57:31 SkyScan query 05:57:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:57:32 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 05:57:32 Message to Master queued w/err=0: serial=96220 error=0 05:57:37 Received message from Master: op=Filter serial=96221 05:57:37 Color wheel filter change from 0 to 0 05:57:37 FLIGetFilterPos err=0 currentPosition=0 05:57:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:57:37 Filter is already there-color wheel unchanged 05:57:37 Received message from Master: op=Shutter serial=96222 05:57:37 Shutter LASER close 05:57:37 Received message from Camera: op=State serial=96224 05:57:37 GetSingleValue result=40 Value=cccccccc 05:57:37 SkyScan query 05:57:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:57:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:38 Parameters OK 05:57:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:38 Set A/D data flow result=40 05:57:38 Set A/D channel type result=40 05:57:38 Set A/D encoding result=40 05:57:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:38 Set channel filter=0.000000e+000 result=40 05:57:38 Config A/D Result=40 05:57:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:38 Get A/D filter: -9.255963e+061 result=40 05:57:38 Get A/D value=-858993460 result=40 05:57:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:38 Parameters OK 05:57:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:38 Set A/D data flow result=40 05:57:38 Set A/D channel type result=40 05:57:38 Set A/D encoding result=40 05:57:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:38 Set channel filter=0.000000e+000 result=40 05:57:38 Config A/D Result=40 05:57:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:38 Get A/D filter: -9.255963e+061 result=40 05:57:38 Get A/D value=-858993460 result=40 05:57:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:57:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:57:38 Aux= 05:57:38 Message to Camera, serial 96224 queued 05:58:15 Received message from Master: op=PointingHead serial=96237 05:58:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:58:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:58:15 Point started: ret=0 05:58:15 point_skyscan result=0 05:58:16 Check angles 05:58:16 SkyScan query 05:58:16 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 05:58:16 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 05:58:16 Check angles 05:58:16 SkyScan query 05:58:17 SkyScan query done: ret=0 az=135.03<-9002 ze=6.495<-11567 Statuses=0009 0008 05:58:17 Msec=750 True Az=135.03 Ze=6.495 Az status=0009 Ze status=0008 05:58:17 Check angles 05:58:17 SkyScan query 05:58:18 SkyScan query done: ret=0 az=117.525<-7835 ze=6.495<-11567 Statuses=0009 0008 05:58:18 Msec=1500 True Az=117.525 Ze=6.495 Az status=0009 Ze status=0008 05:58:18 Check angles 05:58:18 SkyScan query 05:58:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:58:19 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:58:19 Message to Master queued w/err=0: serial=96237 error=0 05:58:24 Received message from Master: op=Filter serial=96238 05:58:24 Color wheel filter change from 0 to 0 05:58:24 FLIGetFilterPos err=0 currentPosition=0 05:58:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:58:24 Filter is already there-color wheel unchanged 05:58:24 Received message from Master: op=Shutter serial=96239 05:58:24 Shutter LASER close 05:58:24 Received message from Camera: op=State serial=96241 05:58:24 GetSingleValue result=40 Value=cccccccc 05:58:24 SkyScan query 05:58:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:58:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:24 Parameters OK 05:58:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:24 Set A/D data flow result=40 05:58:24 Set A/D channel type result=40 05:58:24 Set A/D encoding result=40 05:58:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:24 Set channel filter=0.000000e+000 result=40 05:58:24 Config A/D Result=40 05:58:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:24 Get A/D filter: -9.255963e+061 result=40 05:58:24 Get A/D value=-858993460 result=40 05:58:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:24 Parameters OK 05:58:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:24 Set A/D data flow result=40 05:58:24 Set A/D channel type result=40 05:58:24 Set A/D encoding result=40 05:58:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:24 Set channel filter=0.000000e+000 result=40 05:58:24 Config A/D Result=40 05:58:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:24 Get A/D filter: -9.255963e+061 result=40 05:58:24 Get A/D value=-858993460 result=40 05:58:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:58:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:58:24 Aux= 05:58:24 Message to Camera, serial 96241 queued 05:59:01 Received message from Master: op=PointingHead serial=96254 05:59:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:59:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:59:02 Point started: ret=0 05:59:02 point_skyscan result=0 05:59:02 Check angles 05:59:02 SkyScan query 05:59:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.565<-13571 Statuses=0008 0009 05:59:03 Msec=0 True Az=112.995 Ze=-23.565 Az status=0008 Ze status=0009 05:59:03 Check angles 05:59:03 SkyScan query 05:59:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.91<-14994 Statuses=0008 0009 05:59:04 Msec=750 True Az=112.995 Ze=-44.91 Az status=0008 Ze status=0009 05:59:04 Check angles 05:59:04 SkyScan query 05:59:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.91<-16394 Statuses=0008 0009 05:59:04 Msec=1500 True Az=112.995 Ze=-65.91 Az status=0008 Ze status=0009 05:59:05 Check angles 05:59:05 SkyScan query 05:59:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.82<-17788 Statuses=0008 0009 05:59:05 Msec=2250 True Az=112.995 Ze=-86.82 Az status=0008 Ze status=0009 05:59:05 Check angles 05:59:05 SkyScan query 05:59:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.805<-19187 Statuses=0008 0009 05:59:06 Msec=3000 True Az=112.995 Ze=-107.805 Az status=0008 Ze status=0009 05:59:06 Check angles 05:59:06 SkyScan query 05:59:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.73<-20582 Statuses=0008 0009 05:59:07 Msec=3750 True Az=112.995 Ze=-128.73 Az status=0008 Ze status=0009 05:59:07 Check angles 05:59:07 SkyScan query 05:59:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 05:59:07 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 05:59:08 Check angles 05:59:08 SkyScan query 05:59:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.61<-23374 Statuses=0008 0009 05:59:08 Msec=5250 True Az=112.995 Ze=-170.61 Az status=0008 Ze status=0009 05:59:08 Check angles 05:59:08 SkyScan query 05:59:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:59:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:59:09 Message to Master queued w/err=0: serial=96254 error=0 05:59:14 Received message from Master: op=Filter serial=96255 05:59:14 Color wheel filter change from 0 to 0 05:59:14 FLIGetFilterPos err=0 currentPosition=0 05:59:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:59:14 Filter is already there-color wheel unchanged 05:59:14 Received message from Master: op=Shutter serial=96256 05:59:14 Shutter LASER open 05:59:14 Received message from Camera: op=State serial=96258 05:59:14 GetSingleValue result=40 Value=cccccccc 05:59:14 SkyScan query 05:59:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:59:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:15 Parameters OK 05:59:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:15 Set A/D data flow result=40 05:59:15 Set A/D channel type result=40 05:59:15 Set A/D encoding result=40 05:59:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:15 Set channel filter=0.000000e+000 result=40 05:59:15 Config A/D Result=40 05:59:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:15 Get A/D filter: -9.255963e+061 result=40 05:59:15 Get A/D value=-858993460 result=40 05:59:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:15 Parameters OK 05:59:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:15 Set A/D data flow result=40 05:59:15 Set A/D channel type result=40 05:59:15 Set A/D encoding result=40 05:59:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:15 Set channel filter=0.000000e+000 result=40 05:59:15 Config A/D Result=40 05:59:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:15 Get A/D filter: -9.255963e+061 result=40 05:59:15 Get A/D value=-858993460 result=40 05:59:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:59:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:59:15 Aux= 05:59:15 Message to Camera, serial 96258 queued 05:59:23 Received message from Master: op=Shutter serial=96268 05:59:23 Shutter LASER close 05:59:24 Received message from Master: op=PointingHead serial=96272 05:59:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:59:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:59:24 Point started: ret=0 05:59:24 point_skyscan result=0 05:59:25 Check angles 05:59:25 SkyScan query 05:59:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.71<-21514 Statuses=0008 0009 05:59:25 Msec=0 True Az=112.995 Ze=-142.71 Az status=0008 Ze status=0009 05:59:26 Check angles 05:59:26 SkyScan query 05:59:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.335<-20089 Statuses=0008 0009 05:59:26 Msec=750 True Az=112.995 Ze=-121.335 Az status=0008 Ze status=0009 05:59:26 Check angles 05:59:26 SkyScan query 05:59:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.38<-18692 Statuses=0008 0009 05:59:27 Msec=1500 True Az=112.995 Ze=-100.38 Az status=0008 Ze status=0009 05:59:27 Check angles 05:59:27 SkyScan query 05:59:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.41<-17294 Statuses=0008 0009 05:59:28 Msec=2250 True Az=112.995 Ze=-79.41 Az status=0008 Ze status=0009 05:59:28 Check angles 05:59:28 SkyScan query 05:59:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.02<-15868 Statuses=0008 0009 05:59:28 Msec=3000 True Az=112.995 Ze=-58.02 Az status=0008 Ze status=0009 05:59:29 Check angles 05:59:29 SkyScan query 05:59:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.095<-14473 Statuses=0008 0009 05:59:29 Msec=3750 True Az=112.995 Ze=-37.095 Az status=0008 Ze status=0009 05:59:29 Check angles 05:59:29 SkyScan query 05:59:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.11<-13074 Statuses=0008 0009 05:59:30 Msec=4500 True Az=112.995 Ze=-16.11 Az status=0008 Ze status=0009 05:59:30 Check angles 05:59:30 SkyScan query 05:59:31 SkyScan query done: ret=0 az=112.995<-7533 ze=4.65<-11690 Statuses=0008 0009 05:59:31 Msec=5250 True Az=112.995 Ze=4.65 Az status=0008 Ze status=0009 05:59:31 Check angles 05:59:31 SkyScan query 05:59:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:59:31 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:59:31 Message to Master queued w/err=0: serial=96272 error=0 05:59:36 Received message from Master: op=Filter serial=96273 05:59:36 Color wheel filter change from 0 to 0 05:59:36 FLIGetFilterPos err=0 currentPosition=0 05:59:36 FLIGetStepsRemaining err=0 RemainingSteps=0 05:59:36 Filter is already there-color wheel unchanged 05:59:37 Received message from Master: op=Shutter serial=96274 05:59:37 Shutter LASER close 05:59:37 Received message from Camera: op=State serial=96276 05:59:37 GetSingleValue result=40 Value=cccccccc 05:59:37 SkyScan query 05:59:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:59:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:37 Parameters OK 05:59:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:37 Set A/D data flow result=40 05:59:37 Set A/D channel type result=40 05:59:37 Set A/D encoding result=40 05:59:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:37 Set channel filter=0.000000e+000 result=40 05:59:37 Config A/D Result=40 05:59:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:37 Get A/D filter: -9.255963e+061 result=40 05:59:37 Get A/D value=-858993460 result=40 05:59:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:37 Parameters OK 05:59:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:37 Set A/D data flow result=40 05:59:37 Set A/D channel type result=40 05:59:37 Set A/D encoding result=40 05:59:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:37 Set channel filter=0.000000e+000 result=40 05:59:37 Config A/D Result=40 05:59:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:37 Get A/D filter: -9.255963e+061 result=40 05:59:37 Get A/D value=-858993460 result=40 05:59:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:59:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:59:37 Aux= 05:59:37 Message to Camera, serial 96276 queued 06:00:14 Received message from Master: op=PointingHead serial=96289 06:00:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:00:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:00:15 Point started: ret=0 06:00:15 point_skyscan result=0 06:00:15 Check angles 06:00:15 SkyScan query 06:00:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:00:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:00:16 Message to Master queued w/err=0: serial=96289 error=0 06:00:21 Received message from Master: op=Filter serial=96290 06:00:21 Color wheel filter change from 0 to 0 06:00:21 FLIGetFilterPos err=0 currentPosition=0 06:00:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:00:21 Filter is already there-color wheel unchanged 06:00:21 Received message from Master: op=Shutter serial=96291 06:00:21 Shutter LASER close 06:00:21 Received message from Camera: op=State serial=96293 06:00:21 GetSingleValue result=40 Value=cccccccc 06:00:21 SkyScan query 06:00:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:00:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:22 Parameters OK 06:00:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:22 Set A/D data flow result=40 06:00:22 Set A/D channel type result=40 06:00:22 Set A/D encoding result=40 06:00:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:22 Set channel filter=0.000000e+000 result=40 06:00:22 Config A/D Result=40 06:00:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:22 Get A/D filter: -9.255963e+061 result=40 06:00:22 Get A/D value=-858993460 result=40 06:00:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:22 Parameters OK 06:00:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:22 Set A/D data flow result=40 06:00:22 Set A/D channel type result=40 06:00:22 Set A/D encoding result=40 06:00:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:22 Set channel filter=0.000000e+000 result=40 06:00:22 Config A/D Result=40 06:00:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:22 Get A/D filter: -9.255963e+061 result=40 06:00:22 Get A/D value=-858993460 result=40 06:00:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:00:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:00:22 Aux= 06:00:22 Message to Camera, serial 96293 queued 06:00:58 Received message from Master: op=PointingHead serial=96306 06:00:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:00:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:00:59 Point started: ret=0 06:00:59 point_skyscan result=0 06:01:00 Check angles 06:01:00 SkyScan query 06:01:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:01:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:01:00 Message to Master queued w/err=0: serial=96306 error=0 06:01:05 Received message from Master: op=Filter serial=96307 06:01:05 Color wheel filter change from 0 to 0 06:01:05 FLIGetFilterPos err=0 currentPosition=0 06:01:05 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:05 Filter is already there-color wheel unchanged 06:01:05 Received message from Master: op=Shutter serial=96308 06:01:05 Shutter LASER close 06:01:05 Received message from Camera: op=State serial=96310 06:01:05 GetSingleValue result=40 Value=cccccccc 06:01:05 SkyScan query 06:01:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:01:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:06 Parameters OK 06:01:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:06 Set A/D data flow result=40 06:01:06 Set A/D channel type result=40 06:01:06 Set A/D encoding result=40 06:01:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:06 Set channel filter=0.000000e+000 result=40 06:01:06 Config A/D Result=40 06:01:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:06 Get A/D filter: -9.255963e+061 result=40 06:01:06 Get A/D value=-858993460 result=40 06:01:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:06 Parameters OK 06:01:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:06 Set A/D data flow result=40 06:01:06 Set A/D channel type result=40 06:01:06 Set A/D encoding result=40 06:01:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:06 Set channel filter=0.000000e+000 result=40 06:01:06 Config A/D Result=40 06:01:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:06 Get A/D filter: -9.255963e+061 result=40 06:01:06 Get A/D value=-858993460 result=40 06:01:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:06 Aux= 06:01:06 Message to Camera, serial 96310 queued 06:01:42 Received message from Master: op=PointingHead serial=96322 06:01:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:01:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:01:42 Point started: ret=0 06:01:42 point_skyscan result=0 06:01:43 Check angles 06:01:43 SkyScan query 06:01:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:01:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:01:44 Message to Master queued w/err=0: serial=96322 error=0 06:01:49 Received message from Master: op=Filter serial=96323 06:01:49 Color wheel filter change from 0 to 0 06:01:49 FLIGetFilterPos err=0 currentPosition=0 06:01:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:49 Filter is already there-color wheel unchanged 06:01:49 Received message from Master: op=Shutter serial=96324 06:01:49 Shutter LASER close 06:01:49 Received message from Camera: op=State serial=96326 06:01:49 GetSingleValue result=40 Value=cccccccc 06:01:49 SkyScan query 06:01:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:01:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:49 Parameters OK 06:01:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:49 Set A/D data flow result=40 06:01:49 Set A/D channel type result=40 06:01:49 Set A/D encoding result=40 06:01:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:49 Set channel filter=0.000000e+000 result=40 06:01:49 Config A/D Result=40 06:01:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:49 Get A/D filter: -9.255963e+061 result=40 06:01:49 Get A/D value=-858993460 result=40 06:01:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:49 Parameters OK 06:01:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:49 Set A/D data flow result=40 06:01:49 Set A/D channel type result=40 06:01:49 Set A/D encoding result=40 06:01:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:49 Set channel filter=0.000000e+000 result=40 06:01:49 Config A/D Result=40 06:01:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:49 Get A/D filter: -9.255963e+061 result=40 06:01:49 Get A/D value=-858993460 result=40 06:01:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:49 Aux= 06:01:49 Message to Camera, serial 96326 queued 06:02:26 Received message from Master: op=PointingHead serial=96339 06:02:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:02:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:02:27 Point started: ret=0 06:02:27 point_skyscan result=0 06:02:27 Check angles 06:02:27 SkyScan query 06:02:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 06:02:28 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 06:02:28 Check angles 06:02:28 SkyScan query 06:02:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.7<-14980 Statuses=0008 0009 06:02:29 Msec=750 True Az=112.995 Ze=-44.7 Az status=0008 Ze status=0009 06:02:29 Check angles 06:02:29 SkyScan query 06:02:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.075<-16405 Statuses=0008 0009 06:02:29 Msec=1500 True Az=112.995 Ze=-66.075 Az status=0008 Ze status=0009 06:02:30 Check angles 06:02:30 SkyScan query 06:02:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.03<-17802 Statuses=0008 0009 06:02:30 Msec=2250 True Az=112.995 Ze=-87.03 Az status=0008 Ze status=0009 06:02:30 Check angles 06:02:30 SkyScan query 06:02:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.405<-19227 Statuses=0008 0009 06:02:31 Msec=3000 True Az=112.995 Ze=-108.405 Az status=0008 Ze status=0009 06:02:31 Check angles 06:02:31 SkyScan query 06:02:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.825<-20655 Statuses=0008 0009 06:02:32 Msec=3750 True Az=112.995 Ze=-129.825 Az status=0008 Ze status=0009 06:02:32 Check angles 06:02:32 SkyScan query 06:02:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.17<-22078 Statuses=0008 0009 06:02:32 Msec=4500 True Az=112.995 Ze=-151.17 Az status=0008 Ze status=0009 06:02:33 Check angles 06:02:33 SkyScan query 06:02:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.735<-23449 Statuses=0008 0009 06:02:33 Msec=5250 True Az=112.995 Ze=-171.735 Az status=0008 Ze status=0009 06:02:33 Check angles 06:02:33 SkyScan query 06:02:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:02:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:02:34 Message to Master queued w/err=0: serial=96339 error=0 06:02:39 Received message from Master: op=Filter serial=96340 06:02:39 Color wheel filter change from 0 to 0 06:02:39 FLIGetFilterPos err=0 currentPosition=0 06:02:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:02:39 Filter is already there-color wheel unchanged 06:02:39 Received message from Master: op=Shutter serial=96341 06:02:39 Shutter LASER open 06:02:39 Received message from Camera: op=State serial=96343 06:02:39 GetSingleValue result=40 Value=cccccccc 06:02:39 SkyScan query 06:02:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:02:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:40 Parameters OK 06:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:40 Set A/D data flow result=40 06:02:40 Set A/D channel type result=40 06:02:40 Set A/D encoding result=40 06:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:40 Set channel filter=0.000000e+000 result=40 06:02:40 Config A/D Result=40 06:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:40 Get A/D filter: -9.255963e+061 result=40 06:02:40 Get A/D value=-858993460 result=40 06:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:40 Parameters OK 06:02:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:40 Set A/D data flow result=40 06:02:40 Set A/D channel type result=40 06:02:40 Set A/D encoding result=40 06:02:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:40 Set channel filter=0.000000e+000 result=40 06:02:40 Config A/D Result=40 06:02:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:40 Get A/D filter: -9.255963e+061 result=40 06:02:40 Get A/D value=-858993460 result=40 06:02:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:02:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:02:40 Aux= 06:02:40 Message to Camera, serial 96343 queued 06:02:48 Received message from Master: op=Shutter serial=96353 06:02:48 Shutter LASER close 06:02:49 Received message from Master: op=PointingHead serial=96357 06:02:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:02:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:02:49 Point started: ret=0 06:02:49 point_skyscan result=0 06:02:50 Check angles 06:02:50 SkyScan query 06:02:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.68<-21512 Statuses=0008 0009 06:02:51 Msec=0 True Az=112.995 Ze=-142.68 Az status=0008 Ze status=0009 06:02:51 Check angles 06:02:51 SkyScan query 06:02:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.695<-20113 Statuses=0008 0009 06:02:51 Msec=750 True Az=112.995 Ze=-121.695 Az status=0008 Ze status=0009 06:02:51 Check angles 06:02:51 SkyScan query 06:02:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.785<-18719 Statuses=0008 0009 06:02:52 Msec=1500 True Az=112.995 Ze=-100.785 Az status=0008 Ze status=0009 06:02:52 Check angles 06:02:52 SkyScan query 06:02:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.83<-17322 Statuses=0008 0009 06:02:53 Msec=2250 True Az=112.995 Ze=-79.83 Az status=0008 Ze status=0009 06:02:53 Check angles 06:02:53 SkyScan query 06:02:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.89<-15926 Statuses=0008 0009 06:02:54 Msec=3000 True Az=112.995 Ze=-58.89 Az status=0008 Ze status=0009 06:02:54 Check angles 06:02:54 SkyScan query 06:02:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.905<-14527 Statuses=0008 0009 06:02:54 Msec=3750 True Az=112.995 Ze=-37.905 Az status=0008 Ze status=0009 06:02:54 Check angles 06:02:54 SkyScan query 06:02:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.965<-13131 Statuses=0008 0009 06:02:55 Msec=4500 True Az=112.995 Ze=-16.965 Az status=0008 Ze status=0009 06:02:55 Check angles 06:02:55 SkyScan query 06:02:56 SkyScan query done: ret=0 az=112.995<-7533 ze=4.005<-11733 Statuses=0008 0009 06:02:56 Msec=5250 True Az=112.995 Ze=4.005 Az status=0008 Ze status=0009 06:02:56 Check angles 06:02:56 SkyScan query 06:02:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:02:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:02:57 Message to Master queued w/err=0: serial=96357 error=0 06:03:02 Received message from Master: op=Filter serial=96358 06:03:02 Color wheel filter change from 0 to 0 06:03:02 FLIGetFilterPos err=0 currentPosition=0 06:03:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:02 Filter is already there-color wheel unchanged 06:03:02 Received message from Master: op=Shutter serial=96359 06:03:02 Shutter LASER close 06:03:02 Received message from Camera: op=State serial=96361 06:03:02 GetSingleValue result=40 Value=cccccccc 06:03:02 SkyScan query 06:03:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:03:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:02 Parameters OK 06:03:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:02 Set A/D data flow result=40 06:03:02 Set A/D channel type result=40 06:03:02 Set A/D encoding result=40 06:03:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:02 Set channel filter=0.000000e+000 result=40 06:03:02 Config A/D Result=40 06:03:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:02 Get A/D filter: -9.255963e+061 result=40 06:03:02 Get A/D value=-858993460 result=40 06:03:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:02 Parameters OK 06:03:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:02 Set A/D data flow result=40 06:03:02 Set A/D channel type result=40 06:03:02 Set A/D encoding result=40 06:03:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:02 Set channel filter=0.000000e+000 result=40 06:03:02 Config A/D Result=40 06:03:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:02 Get A/D filter: -9.255963e+061 result=40 06:03:02 Get A/D value=-858993460 result=40 06:03:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:02 Aux= 06:03:02 Message to Camera, serial 96361 queued 06:03:38 Received message from Master: op=Identify serial=96369 06:03:39 Received message from Master: op=PointingHead serial=96377 06:03:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:03:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:03:40 Point started: ret=0 06:03:40 point_skyscan result=0 06:03:40 Check angles 06:03:40 SkyScan query 06:03:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:03:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:03:41 Message to Master queued w/err=0: serial=96377 error=0 06:03:46 Received message from Master: op=Filter serial=96378 06:03:46 Color wheel filter change from 0 to 0 06:03:46 FLIGetFilterPos err=0 currentPosition=0 06:03:46 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:46 Filter is already there-color wheel unchanged 06:03:46 Received message from Master: op=Shutter serial=96379 06:03:46 Shutter LASER close 06:03:46 Received message from Camera: op=State serial=96381 06:03:46 GetSingleValue result=40 Value=cccccccc 06:03:46 SkyScan query 06:03:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:03:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:47 Parameters OK 06:03:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:47 Set A/D data flow result=40 06:03:47 Set A/D channel type result=40 06:03:47 Set A/D encoding result=40 06:03:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:47 Set channel filter=0.000000e+000 result=40 06:03:47 Config A/D Result=40 06:03:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:47 Get A/D filter: -9.255963e+061 result=40 06:03:47 Get A/D value=-858993460 result=40 06:03:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:47 Parameters OK 06:03:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:47 Set A/D data flow result=40 06:03:47 Set A/D channel type result=40 06:03:47 Set A/D encoding result=40 06:03:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:47 Set channel filter=0.000000e+000 result=40 06:03:47 Config A/D Result=40 06:03:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:47 Get A/D filter: -9.255963e+061 result=40 06:03:47 Get A/D value=-858993460 result=40 06:03:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:47 Aux= 06:03:47 Message to Camera, serial 96381 queued [UTC 2019-3-4 06:03:50] 06:04:24 Received message from Master: op=PointingHead serial=96394 06:04:24 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:04:24 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:04:24 Point started: ret=0 06:04:24 point_skyscan result=0 06:04:25 Check angles 06:04:25 SkyScan query 06:04:25 SkyScan query done: ret=0 az=136.14<-9076 ze=-6.51<-12434 Statuses=0009 0008 06:04:25 Msec=0 True Az=136.14 Ze=-6.51 Az status=0009 Ze status=0008 06:04:25 Check angles 06:04:25 SkyScan query 06:04:26 SkyScan query done: ret=0 az=153.51<-10234 ze=-6.51<-12434 Statuses=0009 0008 06:04:26 Msec=750 True Az=153.51 Ze=-6.51 Az status=0009 Ze status=0008 06:04:26 Check angles 06:04:26 SkyScan query 06:04:27 SkyScan query done: ret=0 az=171.045<-11403 ze=-6.495<-12433 Statuses=0009 0008 06:04:27 Msec=1500 True Az=171.045 Ze=-6.495 Az status=0009 Ze status=0008 06:04:27 Check angles 06:04:27 SkyScan query 06:04:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:04:28 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:04:28 Message to Master queued w/err=0: serial=96394 error=0 06:04:33 Received message from Master: op=Filter serial=96395 06:04:33 Color wheel filter change from 0 to 0 06:04:33 FLIGetFilterPos err=0 currentPosition=0 06:04:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:04:33 Filter is already there-color wheel unchanged 06:04:33 Received message from Master: op=Shutter serial=96396 06:04:33 Shutter LASER close 06:04:33 Received message from Camera: op=State serial=96398 06:04:33 GetSingleValue result=40 Value=cccccccc 06:04:33 SkyScan query 06:04:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:04:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:33 Parameters OK 06:04:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:33 Set A/D data flow result=40 06:04:33 Set A/D channel type result=40 06:04:33 Set A/D encoding result=40 06:04:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:33 Set channel filter=0.000000e+000 result=40 06:04:33 Config A/D Result=40 06:04:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:33 Get A/D filter: -9.255963e+061 result=40 06:04:33 Get A/D value=-858993460 result=40 06:04:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:33 Parameters OK 06:04:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:33 Set A/D data flow result=40 06:04:33 Set A/D channel type result=40 06:04:33 Set A/D encoding result=40 06:04:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:33 Set channel filter=0.000000e+000 result=40 06:04:33 Config A/D Result=40 06:04:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:33 Get A/D filter: -9.255963e+061 result=40 06:04:33 Get A/D value=-858993460 result=40 06:04:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:04:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:04:33 Aux= 06:04:33 Message to Camera, serial 96398 queued 06:05:10 Received message from Master: op=PointingHead serial=96411 06:05:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:05:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:05:10 Point started: ret=0 06:05:10 point_skyscan result=0 06:05:11 Check angles 06:05:11 SkyScan query 06:05:12 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 06:05:12 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 06:05:12 Check angles 06:05:12 SkyScan query 06:05:13 SkyScan query done: ret=0 az=135.615<-9041 ze=6.495<-11567 Statuses=0009 0008 06:05:13 Msec=750 True Az=135.615 Ze=6.495 Az status=0009 Ze status=0008 06:05:13 Check angles 06:05:13 SkyScan query 06:05:13 SkyScan query done: ret=0 az=118.125<-7875 ze=6.495<-11567 Statuses=0009 0008 06:05:13 Msec=1500 True Az=118.125 Ze=6.495 Az status=0009 Ze status=0008 06:05:13 Check angles 06:05:13 SkyScan query 06:05:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:05:14 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:05:14 Message to Master queued w/err=0: serial=96411 error=0 06:05:19 Received message from Master: op=Filter serial=96412 06:05:19 Color wheel filter change from 0 to 0 06:05:19 FLIGetFilterPos err=0 currentPosition=0 06:05:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:05:19 Filter is already there-color wheel unchanged 06:05:19 Received message from Master: op=Shutter serial=96413 06:05:19 Shutter LASER close 06:05:19 Received message from Camera: op=State serial=96415 06:05:19 GetSingleValue result=40 Value=cccccccc 06:05:19 SkyScan query 06:05:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:05:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:20 Parameters OK 06:05:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:20 Set A/D data flow result=40 06:05:20 Set A/D channel type result=40 06:05:20 Set A/D encoding result=40 06:05:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:20 Set channel filter=0.000000e+000 result=40 06:05:20 Config A/D Result=40 06:05:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:20 Get A/D filter: -9.255963e+061 result=40 06:05:20 Get A/D value=-858993460 result=40 06:05:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:20 Parameters OK 06:05:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:20 Set A/D data flow result=40 06:05:20 Set A/D channel type result=40 06:05:20 Set A/D encoding result=40 06:05:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:20 Set channel filter=0.000000e+000 result=40 06:05:20 Config A/D Result=40 06:05:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:20 Get A/D filter: -9.255963e+061 result=40 06:05:20 Get A/D value=-858993460 result=40 06:05:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:05:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:05:20 Aux= 06:05:20 Message to Camera, serial 96415 queued 06:05:57 Received message from Master: op=PointingHead serial=96428 06:05:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:05:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:05:57 Point started: ret=0 06:05:57 point_skyscan result=0 06:05:58 Check angles 06:05:58 SkyScan query 06:05:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.745<-13583 Statuses=0008 0009 06:05:58 Msec=0 True Az=112.995 Ze=-23.745 Az status=0008 Ze status=0009 06:05:59 Check angles 06:05:59 SkyScan query 06:05:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.09<-15006 Statuses=0008 0009 06:05:59 Msec=750 True Az=112.995 Ze=-45.09 Az status=0008 Ze status=0009 06:05:59 Check angles 06:05:59 SkyScan query 06:06:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.495<-16433 Statuses=0008 0009 06:06:00 Msec=1500 True Az=112.995 Ze=-66.495 Az status=0008 Ze status=0009 06:06:00 Check angles 06:06:00 SkyScan query 06:06:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.48<-17832 Statuses=0008 0009 06:06:01 Msec=2250 True Az=112.995 Ze=-87.48 Az status=0008 Ze status=0009 06:06:01 Check angles 06:06:01 SkyScan query 06:06:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.84<-19256 Statuses=0008 0009 06:06:01 Msec=3000 True Az=112.995 Ze=-108.84 Az status=0008 Ze status=0009 06:06:02 Check angles 06:06:02 SkyScan query 06:06:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-130.245<-20683 Statuses=0008 0009 06:06:02 Msec=3750 True Az=112.995 Ze=-130.245 Az status=0008 Ze status=0009 06:06:02 Check angles 06:06:02 SkyScan query 06:06:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.155<-22077 Statuses=0008 0009 06:06:03 Msec=4500 True Az=112.995 Ze=-151.155 Az status=0008 Ze status=0009 06:06:03 Check angles 06:06:03 SkyScan query 06:06:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.735<-23449 Statuses=0008 0009 06:06:04 Msec=5250 True Az=112.995 Ze=-171.735 Az status=0008 Ze status=0009 06:06:04 Check angles 06:06:04 SkyScan query 06:06:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:06:04 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:06:04 Message to Master queued w/err=0: serial=96428 error=0 06:06:09 Received message from Master: op=Filter serial=96429 06:06:09 Color wheel filter change from 0 to 0 06:06:09 FLIGetFilterPos err=0 currentPosition=0 06:06:09 FLIGetStepsRemaining err=0 RemainingSteps=0 06:06:09 Filter is already there-color wheel unchanged 06:06:10 Received message from Master: op=Shutter serial=96430 06:06:10 Shutter LASER open 06:06:10 Received message from Camera: op=State serial=96432 06:06:10 GetSingleValue result=40 Value=cccccccc 06:06:10 SkyScan query 06:06:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:06:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:10 Parameters OK 06:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:10 Set A/D data flow result=40 06:06:10 Set A/D channel type result=40 06:06:10 Set A/D encoding result=40 06:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:10 Set channel filter=0.000000e+000 result=40 06:06:10 Config A/D Result=40 06:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:10 Get A/D filter: -9.255963e+061 result=40 06:06:10 Get A/D value=-858993460 result=40 06:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:10 Parameters OK 06:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:10 Set A/D data flow result=40 06:06:10 Set A/D channel type result=40 06:06:10 Set A/D encoding result=40 06:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:10 Set channel filter=0.000000e+000 result=40 06:06:10 Config A/D Result=40 06:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:10 Get A/D filter: -9.255963e+061 result=40 06:06:10 Get A/D value=-858993460 result=40 06:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:06:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:06:10 Aux= 06:06:10 Message to Camera, serial 96432 queued 06:06:19 Received message from Master: op=Shutter serial=96442 06:06:19 Shutter LASER close 06:06:19 Received message from Master: op=PointingHead serial=96446 06:06:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:06:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:06:20 Point started: ret=0 06:06:20 point_skyscan result=0 06:06:20 Check angles 06:06:20 SkyScan query 06:06:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.89<-21526 Statuses=0008 0009 06:06:21 Msec=0 True Az=112.995 Ze=-142.89 Az status=0008 Ze status=0009 06:06:21 Check angles 06:06:21 SkyScan query 06:06:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.92<-20128 Statuses=0008 0009 06:06:22 Msec=750 True Az=112.995 Ze=-121.92 Az status=0008 Ze status=0009 06:06:22 Check angles 06:06:22 SkyScan query 06:06:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.995<-18733 Statuses=0008 0009 06:06:22 Msec=1500 True Az=112.995 Ze=-100.995 Az status=0008 Ze status=0009 06:06:23 Check angles 06:06:23 SkyScan query 06:06:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.995<-17333 Statuses=0008 0009 06:06:23 Msec=2250 True Az=112.995 Ze=-79.995 Az status=0008 Ze status=0009 06:06:23 Check angles 06:06:23 SkyScan query 06:06:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.085<-15939 Statuses=0008 0009 06:06:24 Msec=3000 True Az=112.995 Ze=-59.085 Az status=0008 Ze status=0009 06:06:24 Check angles 06:06:24 SkyScan query 06:06:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.085<-14539 Statuses=0008 0009 06:06:25 Msec=3750 True Az=112.995 Ze=-38.085 Az status=0008 Ze status=0009 06:06:25 Check angles 06:06:25 SkyScan query 06:06:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.175<-13145 Statuses=0008 0009 06:06:25 Msec=4500 True Az=112.995 Ze=-17.175 Az status=0008 Ze status=0009 06:06:26 Check angles 06:06:26 SkyScan query 06:06:26 SkyScan query done: ret=0 az=112.995<-7533 ze=4.2<-11720 Statuses=0008 0009 06:06:26 Msec=5250 True Az=112.995 Ze=4.2 Az status=0008 Ze status=0009 06:06:26 Check angles 06:06:26 SkyScan query 06:06:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:06:27 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:06:27 Message to Master queued w/err=0: serial=96446 error=0 06:06:32 Received message from Master: op=Filter serial=96447 06:06:32 Color wheel filter change from 0 to 0 06:06:32 FLIGetFilterPos err=0 currentPosition=0 06:06:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:06:32 Filter is already there-color wheel unchanged 06:06:32 Received message from Master: op=Shutter serial=96448 06:06:32 Shutter LASER close 06:06:32 Received message from Camera: op=State serial=96450 06:06:32 GetSingleValue result=40 Value=cccccccc 06:06:32 SkyScan query 06:06:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:06:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:33 Parameters OK 06:06:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:33 Set A/D data flow result=40 06:06:33 Set A/D channel type result=40 06:06:33 Set A/D encoding result=40 06:06:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:33 Set channel filter=0.000000e+000 result=40 06:06:33 Config A/D Result=40 06:06:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:33 Get A/D filter: -9.255963e+061 result=40 06:06:33 Get A/D value=-858993460 result=40 06:06:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:33 Parameters OK 06:06:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:33 Set A/D data flow result=40 06:06:33 Set A/D channel type result=40 06:06:33 Set A/D encoding result=40 06:06:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:33 Set channel filter=0.000000e+000 result=40 06:06:33 Config A/D Result=40 06:06:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:33 Get A/D filter: -9.255963e+061 result=40 06:06:33 Get A/D value=-858993460 result=40 06:06:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:06:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:06:33 Aux= 06:06:33 Message to Camera, serial 96450 queued 06:07:10 Received message from Master: op=PointingHead serial=96463 06:07:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:07:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:07:10 Point started: ret=0 06:07:10 point_skyscan result=0 06:07:11 Check angles 06:07:11 SkyScan query 06:07:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:07:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:07:11 Message to Master queued w/err=0: serial=96463 error=0 06:07:16 Received message from Master: op=Filter serial=96464 06:07:16 Color wheel filter change from 0 to 0 06:07:16 FLIGetFilterPos err=0 currentPosition=0 06:07:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:07:16 Filter is already there-color wheel unchanged 06:07:17 Received message from Master: op=Shutter serial=96465 06:07:17 Shutter LASER close 06:07:17 Received message from Camera: op=State serial=96467 06:07:17 GetSingleValue result=40 Value=cccccccc 06:07:17 SkyScan query 06:07:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:07:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:17 Parameters OK 06:07:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:17 Set A/D data flow result=40 06:07:17 Set A/D channel type result=40 06:07:17 Set A/D encoding result=40 06:07:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:17 Set channel filter=0.000000e+000 result=40 06:07:17 Config A/D Result=40 06:07:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:17 Get A/D filter: -9.255963e+061 result=40 06:07:17 Get A/D value=-858993460 result=40 06:07:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:17 Parameters OK 06:07:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:17 Set A/D data flow result=40 06:07:17 Set A/D channel type result=40 06:07:17 Set A/D encoding result=40 06:07:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:17 Set channel filter=0.000000e+000 result=40 06:07:17 Config A/D Result=40 06:07:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:17 Get A/D filter: -9.255963e+061 result=40 06:07:17 Get A/D value=-858993460 result=40 06:07:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:07:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:07:17 Aux= 06:07:17 Message to Camera, serial 96467 queued 06:07:54 Received message from Master: op=PointingHead serial=96480 06:07:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:07:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:07:54 Point started: ret=0 06:07:54 point_skyscan result=0 06:07:55 Check angles 06:07:55 SkyScan query 06:07:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:07:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:07:56 Message to Master queued w/err=0: serial=96480 error=0 06:08:01 Received message from Master: op=Filter serial=96481 06:08:01 Color wheel filter change from 0 to 0 06:08:01 FLIGetFilterPos err=0 currentPosition=0 06:08:01 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:01 Filter is already there-color wheel unchanged 06:08:01 Received message from Master: op=Shutter serial=96482 06:08:01 Shutter LASER close 06:08:01 Received message from Camera: op=State serial=96484 06:08:01 GetSingleValue result=40 Value=cccccccc 06:08:01 SkyScan query 06:08:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:08:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:01 Parameters OK 06:08:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:01 Set A/D data flow result=40 06:08:01 Set A/D channel type result=40 06:08:01 Set A/D encoding result=40 06:08:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:01 Set channel filter=0.000000e+000 result=40 06:08:01 Config A/D Result=40 06:08:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:01 Get A/D filter: -9.255963e+061 result=40 06:08:01 Get A/D value=-858993460 result=40 06:08:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:01 Parameters OK 06:08:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:01 Set A/D data flow result=40 06:08:01 Set A/D channel type result=40 06:08:01 Set A/D encoding result=40 06:08:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:01 Set channel filter=0.000000e+000 result=40 06:08:01 Config A/D Result=40 06:08:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:01 Get A/D filter: -9.255963e+061 result=40 06:08:01 Get A/D value=-858993460 result=40 06:08:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:01 Aux= 06:08:01 Message to Camera, serial 96484 queued 06:08:38 Received message from Master: op=PointingHead serial=96497 06:08:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:08:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:08:39 Point started: ret=0 06:08:39 point_skyscan result=0 06:08:39 Check angles 06:08:39 SkyScan query 06:08:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:08:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:08:40 Message to Master queued w/err=0: serial=96497 error=0 06:08:45 Received message from Master: op=Filter serial=96498 06:08:45 Color wheel filter change from 0 to 0 06:08:45 FLIGetFilterPos err=0 currentPosition=0 06:08:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:45 Filter is already there-color wheel unchanged 06:08:45 Received message from Master: op=Shutter serial=96499 06:08:45 Shutter LASER close 06:08:45 Received message from Camera: op=State serial=96501 06:08:45 GetSingleValue result=40 Value=cccccccc 06:08:45 SkyScan query 06:08:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:08:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:46 Parameters OK 06:08:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:46 Set A/D data flow result=40 06:08:46 Set A/D channel type result=40 06:08:46 Set A/D encoding result=40 06:08:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:46 Set channel filter=0.000000e+000 result=40 06:08:46 Config A/D Result=40 06:08:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:46 Get A/D filter: -9.255963e+061 result=40 06:08:46 Get A/D value=-858993460 result=40 06:08:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:46 Parameters OK 06:08:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:46 Set A/D data flow result=40 06:08:46 Set A/D channel type result=40 06:08:46 Set A/D encoding result=40 06:08:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:46 Set channel filter=0.000000e+000 result=40 06:08:46 Config A/D Result=40 06:08:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:46 Get A/D filter: -9.255963e+061 result=40 06:08:46 Get A/D value=-858993460 result=40 06:08:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:46 Aux= 06:08:46 Message to Camera, serial 96501 queued 06:09:23 Received message from Master: op=PointingHead serial=96514 06:09:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:09:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:09:23 Point started: ret=0 06:09:23 point_skyscan result=0 06:09:24 Check angles 06:09:24 SkyScan query 06:09:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.61<-13574 Statuses=0008 0009 06:09:24 Msec=0 True Az=112.995 Ze=-23.61 Az status=0008 Ze status=0009 06:09:25 Check angles 06:09:25 SkyScan query 06:09:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.58<-14972 Statuses=0008 0009 06:09:25 Msec=750 True Az=112.995 Ze=-44.58 Az status=0008 Ze status=0009 06:09:25 Check angles 06:09:25 SkyScan query 06:09:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.925<-16395 Statuses=0008 0009 06:09:26 Msec=1500 True Az=112.995 Ze=-65.925 Az status=0008 Ze status=0009 06:09:26 Check angles 06:09:26 SkyScan query 06:09:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.85<-17790 Statuses=0008 0009 06:09:27 Msec=2250 True Az=112.995 Ze=-86.85 Az status=0008 Ze status=0009 06:09:27 Check angles 06:09:27 SkyScan query 06:09:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.85<-19190 Statuses=0008 0009 06:09:27 Msec=3000 True Az=112.995 Ze=-107.85 Az status=0008 Ze status=0009 06:09:28 Check angles 06:09:28 SkyScan query 06:09:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.775<-20585 Statuses=0008 0009 06:09:28 Msec=3750 True Az=112.995 Ze=-128.775 Az status=0008 Ze status=0009 06:09:28 Check angles 06:09:28 SkyScan query 06:09:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.745<-21983 Statuses=0008 0009 06:09:29 Msec=4500 True Az=112.995 Ze=-149.745 Az status=0008 Ze status=0009 06:09:29 Check angles 06:09:29 SkyScan query 06:09:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.655<-23377 Statuses=0008 0009 06:09:30 Msec=5250 True Az=112.995 Ze=-170.655 Az status=0008 Ze status=0009 06:09:30 Check angles 06:09:30 SkyScan query 06:09:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:09:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:09:30 Message to Master queued w/err=0: serial=96514 error=0 06:09:35 Received message from Master: op=Filter serial=96515 06:09:35 Color wheel filter change from 0 to 0 06:09:35 FLIGetFilterPos err=0 currentPosition=0 06:09:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:09:35 Filter is already there-color wheel unchanged 06:09:36 Received message from Master: op=Shutter serial=96516 06:09:36 Shutter LASER open 06:09:36 Received message from Camera: op=State serial=96518 06:09:36 GetSingleValue result=40 Value=cccccccc 06:09:36 SkyScan query 06:09:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:09:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:36 Parameters OK 06:09:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:36 Set A/D data flow result=40 06:09:36 Set A/D channel type result=40 06:09:36 Set A/D encoding result=40 06:09:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:36 Set channel filter=0.000000e+000 result=40 06:09:36 Config A/D Result=40 06:09:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:36 Get A/D filter: -9.255963e+061 result=40 06:09:36 Get A/D value=-858993460 result=40 06:09:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:36 Parameters OK 06:09:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:36 Set A/D data flow result=40 06:09:36 Set A/D channel type result=40 06:09:36 Set A/D encoding result=40 06:09:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:36 Set channel filter=0.000000e+000 result=40 06:09:36 Config A/D Result=40 06:09:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:36 Get A/D filter: -9.255963e+061 result=40 06:09:36 Get A/D value=-858993460 result=40 06:09:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:09:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:09:36 Aux= 06:09:36 Message to Camera, serial 96518 queued 06:09:45 Received message from Master: op=Shutter serial=96528 06:09:45 Shutter LASER close 06:09:45 Received message from Master: op=PointingHead serial=96532 06:09:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:09:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:09:46 Point started: ret=0 06:09:46 point_skyscan result=0 06:09:46 Check angles 06:09:46 SkyScan query 06:09:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 06:09:47 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 06:09:47 Check angles 06:09:47 SkyScan query 06:09:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.46<-20164 Statuses=0008 0009 06:09:48 Msec=750 True Az=112.995 Ze=-122.46 Az status=0008 Ze status=0009 06:09:48 Check angles 06:09:48 SkyScan query 06:09:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.46<-18764 Statuses=0008 0009 06:09:48 Msec=1500 True Az=112.995 Ze=-101.46 Az status=0008 Ze status=0009 06:09:49 Check angles 06:09:49 SkyScan query 06:09:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.505<-17367 Statuses=0008 0009 06:09:49 Msec=2250 True Az=112.995 Ze=-80.505 Az status=0008 Ze status=0009 06:09:49 Check angles 06:09:49 SkyScan query 06:09:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.55<-15970 Statuses=0008 0009 06:09:50 Msec=3000 True Az=112.995 Ze=-59.55 Az status=0008 Ze status=0009 06:09:50 Check angles 06:09:50 SkyScan query 06:09:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.61<-14574 Statuses=0008 0009 06:09:51 Msec=3750 True Az=112.995 Ze=-38.61 Az status=0008 Ze status=0009 06:09:51 Check angles 06:09:51 SkyScan query 06:09:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.64<-13176 Statuses=0008 0009 06:09:51 Msec=4500 True Az=112.995 Ze=-17.64 Az status=0008 Ze status=0009 06:09:52 Check angles 06:09:52 SkyScan query 06:09:52 SkyScan query done: ret=0 az=112.98<-7532 ze=3.3<-11780 Statuses=0008 0009 06:09:52 Msec=5250 True Az=112.98 Ze=3.3 Az status=0008 Ze status=0009 06:09:52 Check angles 06:09:52 SkyScan query 06:09:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:09:53 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:09:53 Message to Master queued w/err=0: serial=96532 error=0 06:09:58 Received message from Master: op=Filter serial=96533 06:09:58 Color wheel filter change from 0 to 0 06:09:58 FLIGetFilterPos err=0 currentPosition=0 06:09:58 FLIGetStepsRemaining err=0 RemainingSteps=0 06:09:58 Filter is already there-color wheel unchanged 06:09:58 Received message from Master: op=Shutter serial=96534 06:09:58 Shutter LASER close 06:09:58 Received message from Camera: op=State serial=96536 06:09:58 GetSingleValue result=40 Value=cccccccc 06:09:58 SkyScan query 06:09:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:09:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:59 Parameters OK 06:09:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:59 Set A/D data flow result=40 06:09:59 Set A/D channel type result=40 06:09:59 Set A/D encoding result=40 06:09:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:59 Set channel filter=0.000000e+000 result=40 06:09:59 Config A/D Result=40 06:09:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:59 Get A/D filter: -9.255963e+061 result=40 06:09:59 Get A/D value=-858993460 result=40 06:09:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:59 Parameters OK 06:09:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:59 Set A/D data flow result=40 06:09:59 Set A/D channel type result=40 06:09:59 Set A/D encoding result=40 06:09:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:59 Set channel filter=0.000000e+000 result=40 06:09:59 Config A/D Result=40 06:09:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:59 Get A/D filter: -9.255963e+061 result=40 06:09:59 Get A/D value=-858993460 result=40 06:09:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:09:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:09:59 Aux= 06:09:59 Message to Camera, serial 96536 queued 06:10:36 Received message from Master: op=PointingHead serial=96549 06:10:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:10:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:10:36 Point started: ret=0 06:10:36 point_skyscan result=0 06:10:37 Check angles 06:10:37 SkyScan query 06:10:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:10:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:10:38 Message to Master queued w/err=0: serial=96549 error=0 06:10:43 Received message from Master: op=Filter serial=96550 06:10:43 Color wheel filter change from 0 to 0 06:10:43 FLIGetFilterPos err=0 currentPosition=0 06:10:43 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:43 Filter is already there-color wheel unchanged 06:10:43 Received message from Master: op=Shutter serial=96551 06:10:43 Shutter LASER close 06:10:43 Received message from Camera: op=State serial=96553 06:10:43 GetSingleValue result=40 Value=cccccccc 06:10:43 SkyScan query 06:10:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:10:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:43 Parameters OK 06:10:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:43 Set A/D data flow result=40 06:10:43 Set A/D channel type result=40 06:10:43 Set A/D encoding result=40 06:10:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:43 Set channel filter=0.000000e+000 result=40 06:10:43 Config A/D Result=40 06:10:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:43 Get A/D filter: -9.255963e+061 result=40 06:10:43 Get A/D value=-858993460 result=40 06:10:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:43 Parameters OK 06:10:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:43 Set A/D data flow result=40 06:10:43 Set A/D channel type result=40 06:10:43 Set A/D encoding result=40 06:10:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:43 Set channel filter=0.000000e+000 result=40 06:10:43 Config A/D Result=40 06:10:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:43 Get A/D filter: -9.255963e+061 result=40 06:10:43 Get A/D value=-858993460 result=40 06:10:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:43 Aux= 06:10:43 Message to Camera, serial 96553 queued 06:11:20 Received message from Master: op=PointingHead serial=96566 06:11:20 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:11:20 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:11:20 Point started: ret=0 06:11:20 point_skyscan result=0 06:11:21 Check angles 06:11:21 SkyScan query 06:11:22 SkyScan query done: ret=0 az=135.99<-9066 ze=-6.51<-12434 Statuses=0009 0008 06:11:22 Msec=0 True Az=135.99 Ze=-6.51 Az status=0009 Ze status=0008 06:11:22 Check angles 06:11:22 SkyScan query 06:11:23 SkyScan query done: ret=0 az=153.465<-10231 ze=-6.495<-12433 Statuses=0009 0008 06:11:23 Msec=750 True Az=153.465 Ze=-6.495 Az status=0009 Ze status=0008 06:11:23 Check angles 06:11:23 SkyScan query 06:11:23 SkyScan query done: ret=0 az=170.85<-11390 ze=-6.495<-12433 Statuses=0009 0008 06:11:23 Msec=1500 True Az=170.85 Ze=-6.495 Az status=0009 Ze status=0008 06:11:23 Check angles 06:11:23 SkyScan query 06:11:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:11:24 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:11:24 Message to Master queued w/err=0: serial=96566 error=0 06:11:29 Received message from Master: op=Filter serial=96567 06:11:29 Color wheel filter change from 0 to 0 06:11:29 FLIGetFilterPos err=0 currentPosition=0 06:11:29 FLIGetStepsRemaining err=0 RemainingSteps=0 06:11:29 Filter is already there-color wheel unchanged 06:11:29 Received message from Master: op=Shutter serial=96568 06:11:29 Shutter LASER close 06:11:29 Received message from Camera: op=State serial=96570 06:11:29 GetSingleValue result=40 Value=cccccccc 06:11:29 SkyScan query 06:11:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:11:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:30 Parameters OK 06:11:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:30 Set A/D data flow result=40 06:11:30 Set A/D channel type result=40 06:11:30 Set A/D encoding result=40 06:11:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:30 Set channel filter=0.000000e+000 result=40 06:11:30 Config A/D Result=40 06:11:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:30 Get A/D filter: -9.255963e+061 result=40 06:11:30 Get A/D value=-858993460 result=40 06:11:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:30 Parameters OK 06:11:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:30 Set A/D data flow result=40 06:11:30 Set A/D channel type result=40 06:11:30 Set A/D encoding result=40 06:11:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:30 Set channel filter=0.000000e+000 result=40 06:11:30 Config A/D Result=40 06:11:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:30 Get A/D filter: -9.255963e+061 result=40 06:11:30 Get A/D value=-858993460 result=40 06:11:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:11:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:11:30 Aux= 06:11:30 Message to Camera, serial 96570 queued 06:12:07 Received message from Master: op=PointingHead serial=96583 06:12:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:12:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:12:07 Point started: ret=0 06:12:07 point_skyscan result=0 06:12:08 Check angles 06:12:08 SkyScan query 06:12:08 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 06:12:08 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 06:12:09 Check angles 06:12:09 SkyScan query 06:12:09 SkyScan query done: ret=0 az=135.135<-9009 ze=6.495<-11567 Statuses=0009 0008 06:12:09 Msec=750 True Az=135.135 Ze=6.495 Az status=0009 Ze status=0008 06:12:09 Check angles 06:12:09 SkyScan query 06:12:10 SkyScan query done: ret=0 az=117.69<-7846 ze=6.495<-11567 Statuses=0009 0008 06:12:10 Msec=1500 True Az=117.69 Ze=6.495 Az status=0009 Ze status=0008 06:12:10 Check angles 06:12:10 SkyScan query 06:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:12:11 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:12:11 Message to Master queued w/err=0: serial=96583 error=0 06:12:16 Received message from Master: op=Filter serial=96584 06:12:16 Color wheel filter change from 0 to 0 06:12:16 FLIGetFilterPos err=0 currentPosition=0 06:12:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:12:16 Filter is already there-color wheel unchanged 06:12:16 Received message from Master: op=Shutter serial=96585 06:12:16 Shutter LASER close 06:12:16 Received message from Camera: op=State serial=96587 06:12:16 GetSingleValue result=40 Value=cccccccc 06:12:16 SkyScan query 06:12:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:12:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:16 Parameters OK 06:12:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:16 Set A/D data flow result=40 06:12:16 Set A/D channel type result=40 06:12:16 Set A/D encoding result=40 06:12:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:16 Set channel filter=0.000000e+000 result=40 06:12:16 Config A/D Result=40 06:12:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:16 Get A/D filter: -9.255963e+061 result=40 06:12:16 Get A/D value=-858993460 result=40 06:12:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:16 Parameters OK 06:12:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:16 Set A/D data flow result=40 06:12:16 Set A/D channel type result=40 06:12:16 Set A/D encoding result=40 06:12:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:16 Set channel filter=0.000000e+000 result=40 06:12:16 Config A/D Result=40 06:12:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:16 Get A/D filter: -9.255963e+061 result=40 06:12:16 Get A/D value=-858993460 result=40 06:12:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:12:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:12:16 Aux= 06:12:16 Message to Camera, serial 96587 queued 06:12:53 Received message from Master: op=PointingHead serial=96600 06:12:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:12:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:12:54 Point started: ret=0 06:12:54 point_skyscan result=0 06:12:54 Check angles 06:12:54 SkyScan query 06:12:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.98<-13532 Statuses=0008 0009 06:12:55 Msec=0 True Az=112.995 Ze=-22.98 Az status=0008 Ze status=0009 06:12:55 Check angles 06:12:55 SkyScan query 06:12:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.995<-14933 Statuses=0008 0009 06:12:56 Msec=750 True Az=112.995 Ze=-43.995 Az status=0008 Ze status=0009 06:12:56 Check angles 06:12:56 SkyScan query 06:12:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.92<-16328 Statuses=0008 0009 06:12:56 Msec=1500 True Az=112.995 Ze=-64.92 Az status=0008 Ze status=0009 06:12:57 Check angles 06:12:57 SkyScan query 06:12:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.92<-17728 Statuses=0008 0009 06:12:57 Msec=2250 True Az=112.995 Ze=-85.92 Az status=0008 Ze status=0009 06:12:57 Check angles 06:12:57 SkyScan query 06:12:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.815<-19121 Statuses=0008 0009 06:12:58 Msec=3000 True Az=112.995 Ze=-106.815 Az status=0008 Ze status=0009 06:12:58 Check angles 06:12:58 SkyScan query 06:12:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.8<-20520 Statuses=0008 0009 06:12:59 Msec=3750 True Az=112.995 Ze=-127.8 Az status=0008 Ze status=0009 06:12:59 Check angles 06:12:59 SkyScan query 06:12:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.725<-21915 Statuses=0008 0009 06:12:59 Msec=4500 True Az=112.995 Ze=-148.725 Az status=0008 Ze status=0009 06:13:00 Check angles 06:13:00 SkyScan query 06:13:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.68<-23312 Statuses=0008 0009 06:13:00 Msec=5250 True Az=112.995 Ze=-169.68 Az status=0008 Ze status=0009 06:13:00 Check angles 06:13:00 SkyScan query 06:13:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:13:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:13:01 Message to Master queued w/err=0: serial=96600 error=0 06:13:06 Received message from Master: op=Filter serial=96601 06:13:06 Color wheel filter change from 0 to 0 06:13:06 FLIGetFilterPos err=0 currentPosition=0 06:13:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:06 Filter is already there-color wheel unchanged 06:13:06 Received message from Master: op=Shutter serial=96602 06:13:06 Shutter LASER open 06:13:06 Received message from Camera: op=State serial=96604 06:13:06 GetSingleValue result=40 Value=cccccccc 06:13:06 SkyScan query 06:13:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:13:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:07 Parameters OK 06:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:07 Set A/D data flow result=40 06:13:07 Set A/D channel type result=40 06:13:07 Set A/D encoding result=40 06:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:07 Set channel filter=0.000000e+000 result=40 06:13:07 Config A/D Result=40 06:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:07 Get A/D filter: -9.255963e+061 result=40 06:13:07 Get A/D value=-858993460 result=40 06:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:07 Parameters OK 06:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:07 Set A/D data flow result=40 06:13:07 Set A/D channel type result=40 06:13:07 Set A/D encoding result=40 06:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:07 Set channel filter=0.000000e+000 result=40 06:13:07 Config A/D Result=40 06:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:07 Get A/D filter: -9.255963e+061 result=40 06:13:07 Get A/D value=-858993460 result=40 06:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:07 Aux= 06:13:07 Message to Camera, serial 96604 queued 06:13:15 Received message from Master: op=Shutter serial=96614 06:13:15 Shutter LASER close 06:13:16 Received message from Master: op=PointingHead serial=96618 06:13:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:13:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:13:16 Point started: ret=0 06:13:16 point_skyscan result=0 06:13:17 Check angles 06:13:17 SkyScan query 06:13:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.52<-21568 Statuses=0008 0009 06:13:17 Msec=0 True Az=112.995 Ze=-143.52 Az status=0008 Ze status=0009 06:13:18 Check angles 06:13:18 SkyScan query 06:13:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.595<-20173 Statuses=0008 0009 06:13:18 Msec=750 True Az=112.995 Ze=-122.595 Az status=0008 Ze status=0009 06:13:18 Check angles 06:13:18 SkyScan query 06:13:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.58<-18772 Statuses=0008 0009 06:13:19 Msec=1500 True Az=112.995 Ze=-101.58 Az status=0008 Ze status=0009 06:13:19 Check angles 06:13:19 SkyScan query 06:13:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.64<-17376 Statuses=0008 0009 06:13:20 Msec=2250 True Az=112.995 Ze=-80.64 Az status=0008 Ze status=0009 06:13:20 Check angles 06:13:20 SkyScan query 06:13:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.685<-15979 Statuses=0008 0009 06:13:20 Msec=3000 True Az=112.995 Ze=-59.685 Az status=0008 Ze status=0009 06:13:21 Check angles 06:13:21 SkyScan query 06:13:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.745<-14583 Statuses=0008 0009 06:13:21 Msec=3750 True Az=112.995 Ze=-38.745 Az status=0008 Ze status=0009 06:13:21 Check angles 06:13:21 SkyScan query 06:13:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.325<-13155 Statuses=0008 0009 06:13:22 Msec=4500 True Az=112.995 Ze=-17.325 Az status=0008 Ze status=0009 06:13:22 Check angles 06:13:22 SkyScan query 06:13:23 SkyScan query done: ret=0 az=112.995<-7533 ze=3.63<-11758 Statuses=0008 0009 06:13:23 Msec=5250 True Az=112.995 Ze=3.63 Az status=0008 Ze status=0009 06:13:23 Check angles 06:13:23 SkyScan query 06:13:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:13:23 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:13:23 Message to Master queued w/err=0: serial=96618 error=0 06:13:28 Received message from Master: op=Filter serial=96619 06:13:28 Color wheel filter change from 0 to 0 06:13:28 FLIGetFilterPos err=0 currentPosition=0 06:13:28 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:28 Filter is already there-color wheel unchanged 06:13:29 Received message from Master: op=Shutter serial=96620 06:13:29 Shutter LASER close 06:13:29 Received message from Camera: op=State serial=96622 06:13:29 GetSingleValue result=40 Value=cccccccc 06:13:29 SkyScan query 06:13:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:13:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:29 Parameters OK 06:13:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:29 Set A/D data flow result=40 06:13:29 Set A/D channel type result=40 06:13:29 Set A/D encoding result=40 06:13:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:29 Set channel filter=0.000000e+000 result=40 06:13:29 Config A/D Result=40 06:13:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:29 Get A/D filter: -9.255963e+061 result=40 06:13:29 Get A/D value=-858993460 result=40 06:13:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:29 Parameters OK 06:13:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:29 Set A/D data flow result=40 06:13:29 Set A/D channel type result=40 06:13:29 Set A/D encoding result=40 06:13:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:29 Set channel filter=0.000000e+000 result=40 06:13:29 Config A/D Result=40 06:13:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:29 Get A/D filter: -9.255963e+061 result=40 06:13:29 Get A/D value=-858993460 result=40 06:13:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:29 Aux= 06:13:29 Message to Camera, serial 96622 queued 06:14:06 Received message from Master: op=PointingHead serial=96635 06:14:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:14:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:14:07 Point started: ret=0 06:14:07 point_skyscan result=0 06:14:07 Check angles 06:14:07 SkyScan query 06:14:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:14:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:14:08 Message to Master queued w/err=0: serial=96635 error=0 06:14:13 Received message from Master: op=Filter serial=96636 06:14:13 Color wheel filter change from 0 to 0 06:14:13 FLIGetFilterPos err=0 currentPosition=0 06:14:13 FLIGetStepsRemaining err=0 RemainingSteps=0 06:14:13 Filter is already there-color wheel unchanged 06:14:13 Received message from Master: op=Shutter serial=96637 06:14:13 Shutter LASER close 06:14:13 Received message from Camera: op=State serial=96639 06:14:13 GetSingleValue result=40 Value=cccccccc 06:14:13 SkyScan query 06:14:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:14:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:14 Parameters OK 06:14:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:14 Set A/D data flow result=40 06:14:14 Set A/D channel type result=40 06:14:14 Set A/D encoding result=40 06:14:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:14 Set channel filter=0.000000e+000 result=40 06:14:14 Config A/D Result=40 06:14:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:14 Get A/D filter: -9.255963e+061 result=40 06:14:14 Get A/D value=-858993460 result=40 06:14:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:14 Parameters OK 06:14:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:14 Set A/D data flow result=40 06:14:14 Set A/D channel type result=40 [UTC 2019-3-4 06:14:14] 06:14:14 Set A/D encoding result=40 06:14:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:14 Set channel filter=0.000000e+000 result=40 06:14:14 Config A/D Result=40 06:14:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:14 Get A/D filter: -9.255963e+061 result=40 06:14:14 Get A/D value=-858993460 result=40 06:14:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:14:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:14:14 Aux= 06:14:14 Message to Camera, serial 96639 queued 06:14:50 Received message from Master: op=PointingHead serial=96652 06:14:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:14:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:14:51 Point started: ret=0 06:14:51 point_skyscan result=0 06:14:52 Check angles 06:14:52 SkyScan query 06:14:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:14:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:14:52 Message to Master queued w/err=0: serial=96652 error=0 06:14:57 Received message from Master: op=Filter serial=96653 06:14:57 Color wheel filter change from 0 to 0 06:14:57 FLIGetFilterPos err=0 currentPosition=0 06:14:57 FLIGetStepsRemaining err=0 RemainingSteps=0 06:14:57 Filter is already there-color wheel unchanged 06:14:57 Received message from Master: op=Shutter serial=96654 06:14:57 Shutter LASER close 06:14:57 Received message from Camera: op=State serial=96656 06:14:57 GetSingleValue result=40 Value=cccccccc 06:14:57 SkyScan query 06:14:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:14:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:58 Parameters OK 06:14:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:58 Set A/D data flow result=40 06:14:58 Set A/D channel type result=40 06:14:58 Set A/D encoding result=40 06:14:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:58 Set channel filter=0.000000e+000 result=40 06:14:58 Config A/D Result=40 06:14:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:58 Get A/D filter: -9.255963e+061 result=40 06:14:58 Get A/D value=-858993460 result=40 06:14:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:58 Parameters OK 06:14:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:58 Set A/D data flow result=40 06:14:58 Set A/D channel type result=40 06:14:58 Set A/D encoding result=40 06:14:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:58 Set channel filter=0.000000e+000 result=40 06:14:58 Config A/D Result=40 06:14:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:58 Get A/D filter: -9.255963e+061 result=40 06:14:58 Get A/D value=-858993460 result=40 06:14:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:14:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:14:58 Aux= 06:14:58 Message to Camera, serial 96656 queued 06:15:35 Received message from Master: op=PointingHead serial=96669 06:15:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:15:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:15:35 Point started: ret=0 06:15:35 point_skyscan result=0 06:15:36 Check angles 06:15:36 SkyScan query 06:15:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:15:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:15:37 Message to Master queued w/err=0: serial=96669 error=0 06:15:42 Received message from Master: op=Filter serial=96670 06:15:42 Color wheel filter change from 0 to 0 06:15:42 FLIGetFilterPos err=0 currentPosition=0 06:15:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:15:42 Filter is already there-color wheel unchanged 06:15:42 Received message from Master: op=Shutter serial=96671 06:15:42 Shutter LASER close 06:15:42 Received message from Camera: op=State serial=96673 06:15:42 GetSingleValue result=40 Value=cccccccc 06:15:42 SkyScan query 06:15:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:15:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:42 Parameters OK 06:15:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:42 Set A/D data flow result=40 06:15:42 Set A/D channel type result=40 06:15:42 Set A/D encoding result=40 06:15:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:42 Set channel filter=0.000000e+000 result=40 06:15:42 Config A/D Result=40 06:15:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:42 Get A/D filter: -9.255963e+061 result=40 06:15:42 Get A/D value=-858993460 result=40 06:15:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:42 Parameters OK 06:15:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:42 Set A/D data flow result=40 06:15:42 Set A/D channel type result=40 06:15:42 Set A/D encoding result=40 06:15:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:42 Set channel filter=0.000000e+000 result=40 06:15:42 Config A/D Result=40 06:15:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:42 Get A/D filter: -9.255963e+061 result=40 06:15:42 Get A/D value=-858993460 result=40 06:15:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:15:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:15:42 Aux= 06:15:42 Message to Camera, serial 96673 queued 06:16:19 Received message from Master: op=PointingHead serial=96686 06:16:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:16:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:16:20 Point started: ret=0 06:16:20 point_skyscan result=0 06:16:20 Check angles 06:16:20 SkyScan query 06:16:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.79<-13586 Statuses=0008 0009 06:16:21 Msec=0 True Az=112.995 Ze=-23.79 Az status=0008 Ze status=0009 06:16:21 Check angles 06:16:21 SkyScan query 06:16:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.715<-14981 Statuses=0008 0009 06:16:22 Msec=750 True Az=112.995 Ze=-44.715 Az status=0008 Ze status=0009 06:16:22 Check angles 06:16:22 SkyScan query 06:16:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.67<-16378 Statuses=0008 0009 06:16:22 Msec=1500 True Az=112.995 Ze=-65.67 Az status=0008 Ze status=0009 06:16:23 Check angles 06:16:23 SkyScan query 06:16:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.06<-17804 Statuses=0008 0009 06:16:23 Msec=2250 True Az=112.995 Ze=-87.06 Az status=0008 Ze status=0009 06:16:23 Check angles 06:16:23 SkyScan query 06:16:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-108<-19200 Statuses=0008 0009 06:16:24 Msec=3000 True Az=112.995 Ze=-108 Az status=0008 Ze status=0009 06:16:24 Check angles 06:16:24 SkyScan query 06:16:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.94<-20596 Statuses=0008 0009 06:16:25 Msec=3750 True Az=112.995 Ze=-128.94 Az status=0008 Ze status=0009 06:16:25 Check angles 06:16:25 SkyScan query 06:16:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.91<-21994 Statuses=0008 0009 06:16:25 Msec=4500 True Az=112.995 Ze=-149.91 Az status=0008 Ze status=0009 06:16:26 Check angles 06:16:26 SkyScan query 06:16:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 06:16:26 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 06:16:26 Check angles 06:16:26 SkyScan query 06:16:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:16:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:16:27 Message to Master queued w/err=0: serial=96686 error=0 06:16:32 Received message from Master: op=Filter serial=96687 06:16:32 Color wheel filter change from 0 to 0 06:16:32 FLIGetFilterPos err=0 currentPosition=0 06:16:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:16:32 Filter is already there-color wheel unchanged 06:16:32 Received message from Master: op=Shutter serial=96688 06:16:32 Shutter LASER open 06:16:32 Received message from Camera: op=State serial=96690 06:16:32 GetSingleValue result=40 Value=cccccccc 06:16:32 SkyScan query 06:16:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:16:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:33 Parameters OK 06:16:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:33 Set A/D data flow result=40 06:16:33 Set A/D channel type result=40 06:16:33 Set A/D encoding result=40 06:16:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:33 Set channel filter=0.000000e+000 result=40 06:16:33 Config A/D Result=40 06:16:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:33 Get A/D filter: -9.255963e+061 result=40 06:16:33 Get A/D value=-858993460 result=40 06:16:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:33 Parameters OK 06:16:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:33 Set A/D data flow result=40 06:16:33 Set A/D channel type result=40 06:16:33 Set A/D encoding result=40 06:16:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:33 Set channel filter=0.000000e+000 result=40 06:16:33 Config A/D Result=40 06:16:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:33 Get A/D filter: -9.255963e+061 result=40 06:16:33 Get A/D value=-858993460 result=40 06:16:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:16:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:16:33 Aux= 06:16:33 Message to Camera, serial 96690 queued 06:16:41 Received message from Master: op=Shutter serial=96700 06:16:41 Shutter LASER close 06:16:42 Received message from Master: op=PointingHead serial=96704 06:16:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:16:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:16:42 Point started: ret=0 06:16:42 point_skyscan result=0 06:16:43 Check angles 06:16:43 SkyScan query 06:16:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 06:16:43 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 06:16:44 Check angles 06:16:44 SkyScan query 06:16:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.815<-20121 Statuses=0008 0009 06:16:44 Msec=750 True Az=112.995 Ze=-121.815 Az status=0008 Ze status=0009 06:16:44 Check angles 06:16:44 SkyScan query 06:16:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 06:16:45 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 06:16:45 Check angles 06:16:45 SkyScan query 06:16:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.5<-17300 Statuses=0008 0009 06:16:46 Msec=2250 True Az=112.995 Ze=-79.5 Az status=0008 Ze status=0009 06:16:46 Check angles 06:16:46 SkyScan query 06:16:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.56<-15904 Statuses=0008 0009 06:16:47 Msec=3000 True Az=112.995 Ze=-58.56 Az status=0008 Ze status=0009 06:16:47 Check angles 06:16:47 SkyScan query 06:16:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.605<-14507 Statuses=0008 0009 06:16:47 Msec=3750 True Az=112.995 Ze=-37.605 Az status=0008 Ze status=0009 06:16:47 Check angles 06:16:47 SkyScan query 06:16:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.23<-13082 Statuses=0008 0009 06:16:48 Msec=4500 True Az=112.995 Ze=-16.23 Az status=0008 Ze status=0009 06:16:48 Check angles 06:16:48 SkyScan query 06:16:49 SkyScan query done: ret=0 az=112.995<-7533 ze=4.575<-11695 Statuses=0008 0009 06:16:49 Msec=5250 True Az=112.995 Ze=4.575 Az status=0008 Ze status=0009 06:16:49 Check angles 06:16:49 SkyScan query 06:16:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:16:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:16:50 Message to Master queued w/err=0: serial=96704 error=0 06:16:55 Received message from Master: op=Filter serial=96705 06:16:55 Color wheel filter change from 0 to 0 06:16:55 FLIGetFilterPos err=0 currentPosition=0 06:16:55 FLIGetStepsRemaining err=0 RemainingSteps=0 06:16:55 Filter is already there-color wheel unchanged 06:16:55 Received message from Master: op=Shutter serial=96706 06:16:55 Shutter LASER close 06:16:55 Received message from Camera: op=State serial=96708 06:16:55 GetSingleValue result=40 Value=cccccccc 06:16:55 SkyScan query 06:16:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:16:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:55 Parameters OK 06:16:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:55 Set A/D data flow result=40 06:16:55 Set A/D channel type result=40 06:16:55 Set A/D encoding result=40 06:16:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:55 Set channel filter=0.000000e+000 result=40 06:16:55 Config A/D Result=40 06:16:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:55 Get A/D filter: -9.255963e+061 result=40 06:16:55 Get A/D value=-858993460 result=40 06:16:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:55 Parameters OK 06:16:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:55 Set A/D data flow result=40 06:16:55 Set A/D channel type result=40 06:16:55 Set A/D encoding result=40 06:16:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:55 Set channel filter=0.000000e+000 result=40 06:16:55 Config A/D Result=40 06:16:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:55 Get A/D filter: -9.255963e+061 result=40 06:16:55 Get A/D value=-858993460 result=40 06:16:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:16:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:16:55 Aux= 06:16:55 Message to Camera, serial 96708 queued 06:17:32 Received message from Master: op=PointingHead serial=96721 06:17:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:17:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:17:33 Point started: ret=0 06:17:33 point_skyscan result=0 06:17:33 Check angles 06:17:33 SkyScan query 06:17:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:17:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:17:34 Message to Master queued w/err=0: serial=96721 error=0 06:17:39 Received message from Master: op=Filter serial=96722 06:17:39 Color wheel filter change from 0 to 0 06:17:39 FLIGetFilterPos err=0 currentPosition=0 06:17:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:17:39 Filter is already there-color wheel unchanged 06:17:39 Received message from Master: op=Shutter serial=96723 06:17:39 Shutter LASER close 06:17:39 Received message from Camera: op=State serial=96725 06:17:39 GetSingleValue result=40 Value=cccccccc 06:17:39 SkyScan query 06:17:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:17:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:40 Parameters OK 06:17:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:40 Set A/D data flow result=40 06:17:40 Set A/D channel type result=40 06:17:40 Set A/D encoding result=40 06:17:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:40 Set channel filter=0.000000e+000 result=40 06:17:40 Config A/D Result=40 06:17:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:40 Get A/D filter: -9.255963e+061 result=40 06:17:40 Get A/D value=-858993460 result=40 06:17:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:40 Parameters OK 06:17:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:40 Set A/D data flow result=40 06:17:40 Set A/D channel type result=40 06:17:40 Set A/D encoding result=40 06:17:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:40 Set channel filter=0.000000e+000 result=40 06:17:40 Config A/D Result=40 06:17:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:40 Get A/D filter: -9.255963e+061 result=40 06:17:40 Get A/D value=-858993460 result=40 06:17:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:17:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:17:40 Aux= 06:17:40 Message to Camera, serial 96725 queued 06:18:17 Received message from Master: op=PointingHead serial=96738 06:18:17 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:18:17 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:18:17 Point started: ret=0 06:18:17 point_skyscan result=0 06:18:18 Check angles 06:18:18 SkyScan query 06:18:18 SkyScan query done: ret=0 az=135.855<-9057 ze=-6.51<-12434 Statuses=0009 0008 06:18:18 Msec=0 True Az=135.855 Ze=-6.51 Az status=0009 Ze status=0008 06:18:18 Check angles 06:18:18 SkyScan query 06:18:19 SkyScan query done: ret=0 az=153.675<-10245 ze=-6.495<-12433 Statuses=0009 0008 06:18:19 Msec=750 True Az=153.675 Ze=-6.495 Az status=0009 Ze status=0008 06:18:19 Check angles 06:18:19 SkyScan query 06:18:20 SkyScan query done: ret=0 az=171.135<-11409 ze=-6.495<-12433 Statuses=0009 0008 06:18:20 Msec=1500 True Az=171.135 Ze=-6.495 Az status=0009 Ze status=0008 06:18:20 Check angles 06:18:20 SkyScan query 06:18:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:18:20 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:18:20 Message to Master queued w/err=0: serial=96738 error=0 06:18:25 Received message from Master: op=Filter serial=96739 06:18:25 Color wheel filter change from 0 to 0 06:18:25 FLIGetFilterPos err=0 currentPosition=0 06:18:25 FLIGetStepsRemaining err=0 RemainingSteps=0 06:18:25 Filter is already there-color wheel unchanged 06:18:26 Received message from Master: op=Shutter serial=96740 06:18:26 Shutter LASER close 06:18:26 Received message from Camera: op=State serial=96742 06:18:26 GetSingleValue result=40 Value=cccccccc 06:18:26 SkyScan query 06:18:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:18:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:26 Parameters OK 06:18:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:26 Set A/D data flow result=40 06:18:26 Set A/D channel type result=40 06:18:26 Set A/D encoding result=40 06:18:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:26 Set channel filter=0.000000e+000 result=40 06:18:26 Config A/D Result=40 06:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:26 Get A/D filter: -9.255963e+061 result=40 06:18:26 Get A/D value=-858993460 result=40 06:18:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:26 Parameters OK 06:18:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:26 Set A/D data flow result=40 06:18:26 Set A/D channel type result=40 06:18:26 Set A/D encoding result=40 06:18:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:26 Set channel filter=0.000000e+000 result=40 06:18:26 Config A/D Result=40 06:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:26 Get A/D filter: -9.255963e+061 result=40 06:18:26 Get A/D value=-858993460 result=40 06:18:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:18:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:18:26 Aux= 06:18:26 Message to Camera, serial 96742 queued 06:19:03 Received message from Master: op=PointingHead serial=96755 06:19:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:19:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:19:03 Point started: ret=0 06:19:03 point_skyscan result=0 06:19:04 Check angles 06:19:04 SkyScan query 06:19:05 SkyScan query done: ret=0 az=152.655<-10177 ze=6.51<-11566 Statuses=0009 0008 06:19:05 Msec=0 True Az=152.655 Ze=6.51 Az status=0009 Ze status=0008 06:19:05 Check angles 06:19:05 SkyScan query 06:19:06 SkyScan query done: ret=0 az=134.925<-8995 ze=6.495<-11567 Statuses=0009 0008 06:19:06 Msec=750 True Az=134.925 Ze=6.495 Az status=0009 Ze status=0008 06:19:06 Check angles 06:19:06 SkyScan query 06:19:06 SkyScan query done: ret=0 az=117.48<-7832 ze=6.495<-11567 Statuses=0009 0008 06:19:06 Msec=1500 True Az=117.48 Ze=6.495 Az status=0009 Ze status=0008 06:19:06 Check angles 06:19:06 SkyScan query 06:19:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:19:07 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:19:07 Message to Master queued w/err=0: serial=96755 error=0 06:19:12 Received message from Master: op=Filter serial=96756 06:19:12 Color wheel filter change from 0 to 0 06:19:12 FLIGetFilterPos err=0 currentPosition=0 06:19:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:19:12 Filter is already there-color wheel unchanged 06:19:12 Received message from Master: op=Shutter serial=96757 06:19:12 Shutter LASER close 06:19:12 Received message from Camera: op=State serial=96759 06:19:12 GetSingleValue result=40 Value=cccccccc 06:19:12 SkyScan query 06:19:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:19:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:13 Parameters OK 06:19:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:13 Set A/D data flow result=40 06:19:13 Set A/D channel type result=40 06:19:13 Set A/D encoding result=40 06:19:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:13 Set channel filter=0.000000e+000 result=40 06:19:13 Config A/D Result=40 06:19:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:13 Get A/D filter: -9.255963e+061 result=40 06:19:13 Get A/D value=-858993460 result=40 06:19:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:13 Parameters OK 06:19:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:13 Set A/D data flow result=40 06:19:13 Set A/D channel type result=40 06:19:13 Set A/D encoding result=40 06:19:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:13 Set channel filter=0.000000e+000 result=40 06:19:13 Config A/D Result=40 06:19:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:13 Get A/D filter: -9.255963e+061 result=40 06:19:13 Get A/D value=-858993460 result=40 06:19:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:19:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:19:13 Aux= 06:19:13 Message to Camera, serial 96759 queued 06:19:50 Received message from Master: op=PointingHead serial=96772 06:19:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:19:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:19:50 Point started: ret=0 06:19:50 point_skyscan result=0 06:19:51 Check angles 06:19:51 SkyScan query 06:19:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 06:19:51 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 06:19:51 Check angles 06:19:51 SkyScan query 06:19:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 06:19:52 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 06:19:52 Check angles 06:19:52 SkyScan query 06:19:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.61<-16374 Statuses=0008 0009 06:19:53 Msec=1500 True Az=112.995 Ze=-65.61 Az status=0008 Ze status=0009 06:19:53 Check angles 06:19:53 SkyScan query 06:19:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.535<-17769 Statuses=0008 0009 06:19:54 Msec=2250 True Az=112.995 Ze=-86.535 Az status=0008 Ze status=0009 06:19:54 Check angles 06:19:54 SkyScan query 06:19:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.52<-19168 Statuses=0008 0009 06:19:54 Msec=3000 True Az=112.995 Ze=-107.52 Az status=0008 Ze status=0009 06:19:54 Check angles 06:19:54 SkyScan query 06:19:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.445<-20563 Statuses=0008 0009 06:19:55 Msec=3750 True Az=112.995 Ze=-128.445 Az status=0008 Ze status=0009 06:19:55 Check angles 06:19:55 SkyScan query 06:19:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.415<-21961 Statuses=0008 0009 06:19:56 Msec=4500 True Az=112.995 Ze=-149.415 Az status=0008 Ze status=0009 06:19:56 Check angles 06:19:56 SkyScan query 06:19:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.355<-23357 Statuses=0008 0009 06:19:57 Msec=5250 True Az=112.995 Ze=-170.355 Az status=0008 Ze status=0009 06:19:57 Check angles 06:19:57 SkyScan query 06:19:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:19:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:19:57 Message to Master queued w/err=0: serial=96772 error=0 06:20:02 Received message from Master: op=Filter serial=96773 06:20:02 Color wheel filter change from 0 to 0 06:20:02 FLIGetFilterPos err=0 currentPosition=0 06:20:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:20:02 Filter is already there-color wheel unchanged 06:20:03 Received message from Master: op=Shutter serial=96774 06:20:03 Shutter LASER open 06:20:03 Received message from Camera: op=State serial=96776 06:20:03 GetSingleValue result=40 Value=cccccccc 06:20:03 SkyScan query 06:20:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:20:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:03 Parameters OK 06:20:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:03 Set A/D data flow result=40 06:20:03 Set A/D channel type result=40 06:20:03 Set A/D encoding result=40 06:20:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:03 Set channel filter=0.000000e+000 result=40 06:20:03 Config A/D Result=40 06:20:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:03 Get A/D filter: -9.255963e+061 result=40 06:20:03 Get A/D value=-858993460 result=40 06:20:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:03 Parameters OK 06:20:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:03 Set A/D data flow result=40 06:20:03 Set A/D channel type result=40 06:20:03 Set A/D encoding result=40 06:20:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:03 Set channel filter=0.000000e+000 result=40 06:20:03 Config A/D Result=40 06:20:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:03 Get A/D filter: -9.255963e+061 result=40 06:20:03 Get A/D value=-858993460 result=40 06:20:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:20:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:20:03 Aux= 06:20:03 Message to Camera, serial 96776 queued 06:20:12 Received message from Master: op=Shutter serial=96786 06:20:12 Shutter LASER close 06:20:12 Received message from Master: op=PointingHead serial=96790 06:20:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:20:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:20:13 Point started: ret=0 06:20:13 point_skyscan result=0 06:20:13 Check angles 06:20:13 SkyScan query 06:20:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 06:20:14 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 06:20:14 Check angles 06:20:14 SkyScan query 06:20:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.49<-20166 Statuses=0008 0009 06:20:15 Msec=750 True Az=112.995 Ze=-122.49 Az status=0008 Ze status=0009 06:20:15 Check angles 06:20:15 SkyScan query 06:20:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.055<-18737 Statuses=0008 0009 06:20:15 Msec=1500 True Az=112.995 Ze=-101.055 Az status=0008 Ze status=0009 06:20:16 Check angles 06:20:16 SkyScan query 06:20:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 06:20:16 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 06:20:16 Check angles 06:20:16 SkyScan query 06:20:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.71<-15914 Statuses=0008 0009 06:20:17 Msec=3000 True Az=112.995 Ze=-58.71 Az status=0008 Ze status=0009 06:20:17 Check angles 06:20:17 SkyScan query 06:20:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.725<-14515 Statuses=0008 0009 06:20:18 Msec=3750 True Az=112.995 Ze=-37.725 Az status=0008 Ze status=0009 06:20:18 Check angles 06:20:18 SkyScan query 06:20:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.785<-13119 Statuses=0008 0009 06:20:18 Msec=4500 True Az=112.995 Ze=-16.785 Az status=0008 Ze status=0009 06:20:19 Check angles 06:20:19 SkyScan query 06:20:19 SkyScan query done: ret=0 az=112.995<-7533 ze=4.485<-11701 Statuses=0008 0009 06:20:19 Msec=5250 True Az=112.995 Ze=4.485 Az status=0008 Ze status=0009 06:20:19 Check angles 06:20:19 SkyScan query 06:20:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:20:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:20:20 Message to Master queued w/err=0: serial=96790 error=0 06:20:25 Received message from Master: op=Filter serial=96791 06:20:25 Color wheel filter change from 0 to 0 06:20:25 FLIGetFilterPos err=0 currentPosition=0 06:20:25 FLIGetStepsRemaining err=0 RemainingSteps=0 06:20:25 Filter is already there-color wheel unchanged 06:20:25 Received message from Master: op=Shutter serial=96792 06:20:25 Shutter LASER close 06:20:25 Received message from Camera: op=State serial=96794 06:20:25 GetSingleValue result=40 Value=cccccccc 06:20:25 SkyScan query 06:20:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:20:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:26 Parameters OK 06:20:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:26 Set A/D data flow result=40 06:20:26 Set A/D channel type result=40 06:20:26 Set A/D encoding result=40 06:20:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:26 Set channel filter=0.000000e+000 result=40 06:20:26 Config A/D Result=40 06:20:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:26 Get A/D filter: -9.255963e+061 result=40 06:20:26 Get A/D value=-858993460 result=40 06:20:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:26 Parameters OK 06:20:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:26 Set A/D data flow result=40 06:20:26 Set A/D channel type result=40 06:20:26 Set A/D encoding result=40 06:20:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:26 Set channel filter=0.000000e+000 result=40 06:20:26 Config A/D Result=40 06:20:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:26 Get A/D filter: -9.255963e+061 result=40 06:20:26 Get A/D value=-858993460 result=40 06:20:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:20:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:20:26 Aux= 06:20:26 Message to Camera, serial 96794 queued 06:21:03 Received message from Master: op=PointingHead serial=96807 06:21:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:21:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:21:03 Point started: ret=0 06:21:03 point_skyscan result=0 06:21:04 Check angles 06:21:04 SkyScan query 06:21:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:21:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:21:04 Message to Master queued w/err=0: serial=96807 error=0 06:21:09 Received message from Master: op=Filter serial=96808 06:21:09 Color wheel filter change from 0 to 0 06:21:09 FLIGetFilterPos err=0 currentPosition=0 06:21:09 FLIGetStepsRemaining err=0 RemainingSteps=0 06:21:09 Filter is already there-color wheel unchanged 06:21:10 Received message from Master: op=Shutter serial=96809 06:21:10 Shutter LASER close 06:21:10 Received message from Camera: op=State serial=96811 06:21:10 GetSingleValue result=40 Value=cccccccc 06:21:10 SkyScan query 06:21:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:21:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:10 Parameters OK 06:21:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:10 Set A/D data flow result=40 06:21:10 Set A/D channel type result=40 06:21:10 Set A/D encoding result=40 06:21:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:10 Set channel filter=0.000000e+000 result=40 06:21:10 Config A/D Result=40 06:21:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:10 Get A/D filter: -9.255963e+061 result=40 06:21:10 Get A/D value=-858993460 result=40 06:21:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:10 Parameters OK 06:21:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:10 Set A/D data flow result=40 06:21:10 Set A/D channel type result=40 06:21:10 Set A/D encoding result=40 06:21:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:10 Set channel filter=0.000000e+000 result=40 06:21:10 Config A/D Result=40 06:21:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:10 Get A/D filter: -9.255963e+061 result=40 06:21:10 Get A/D value=-858993460 result=40 06:21:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:21:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:21:10 Aux= 06:21:10 Message to Camera, serial 96811 queued 06:21:47 Received message from Master: op=PointingHead serial=96824 06:21:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:21:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:21:47 Point started: ret=0 06:21:47 point_skyscan result=0 06:21:48 Check angles 06:21:48 SkyScan query 06:21:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:21:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:21:49 Message to Master queued w/err=0: serial=96824 error=0 06:21:54 Received message from Master: op=Filter serial=96825 06:21:54 Color wheel filter change from 0 to 0 06:21:54 FLIGetFilterPos err=0 currentPosition=0 06:21:54 FLIGetStepsRemaining err=0 RemainingSteps=0 06:21:54 Filter is already there-color wheel unchanged 06:21:54 Received message from Master: op=Shutter serial=96826 06:21:54 Shutter LASER close 06:21:54 Received message from Camera: op=State serial=96828 06:21:54 GetSingleValue result=40 Value=cccccccc 06:21:54 SkyScan query 06:21:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:21:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:54 Parameters OK 06:21:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:54 Set A/D data flow result=40 06:21:54 Set A/D channel type result=40 06:21:54 Set A/D encoding result=40 06:21:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:54 Set channel filter=0.000000e+000 result=40 06:21:54 Config A/D Result=40 06:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:54 Get A/D filter: -9.255963e+061 result=40 06:21:54 Get A/D value=-858993460 result=40 06:21:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:54 Parameters OK 06:21:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:54 Set A/D data flow result=40 06:21:54 Set A/D channel type result=40 06:21:54 Set A/D encoding result=40 06:21:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:54 Set channel filter=0.000000e+000 result=40 06:21:54 Config A/D Result=40 06:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:54 Get A/D filter: -9.255963e+061 result=40 06:21:54 Get A/D value=-858993460 result=40 06:21:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:21:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:21:54 Aux= 06:21:54 Message to Camera, serial 96828 queued 06:22:31 Received message from Master: op=PointingHead serial=96841 06:22:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:22:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:22:32 Point started: ret=0 06:22:32 point_skyscan result=0 06:22:32 Check angles 06:22:32 SkyScan query 06:22:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:22:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:22:33 Message to Master queued w/err=0: serial=96841 error=0 06:22:38 Received message from Master: op=Filter serial=96842 06:22:38 Color wheel filter change from 0 to 0 06:22:38 FLIGetFilterPos err=0 currentPosition=0 06:22:38 FLIGetStepsRemaining err=0 RemainingSteps=0 06:22:38 Filter is already there-color wheel unchanged 06:22:38 Received message from Master: op=Shutter serial=96843 06:22:38 Shutter LASER close 06:22:38 Received message from Camera: op=State serial=96845 06:22:38 GetSingleValue result=40 Value=cccccccc 06:22:38 SkyScan query 06:22:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:22:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:39 Parameters OK 06:22:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:39 Set A/D data flow result=40 06:22:39 Set A/D channel type result=40 06:22:39 Set A/D encoding result=40 06:22:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:39 Set channel filter=0.000000e+000 result=40 06:22:39 Config A/D Result=40 06:22:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:39 Get A/D filter: -9.255963e+061 result=40 06:22:39 Get A/D value=-858993460 result=40 06:22:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:39 Parameters OK 06:22:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:39 Set A/D data flow result=40 06:22:39 Set A/D channel type result=40 06:22:39 Set A/D encoding result=40 06:22:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:39 Set channel filter=0.000000e+000 result=40 06:22:39 Config A/D Result=40 06:22:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:39 Get A/D filter: -9.255963e+061 result=40 06:22:39 Get A/D value=-858993460 result=40 06:22:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:22:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:22:39 Aux= 06:22:39 Message to Camera, serial 96845 queued 06:23:16 Received message from Master: op=PointingHead serial=96858 06:23:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:23:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:23:16 Point started: ret=0 06:23:16 point_skyscan result=0 06:23:17 Check angles 06:23:17 SkyScan query 06:23:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.925<-13595 Statuses=0008 0009 06:23:17 Msec=0 True Az=112.995 Ze=-23.925 Az status=0008 Ze status=0009 06:23:17 Check angles 06:23:17 SkyScan query 06:23:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 06:23:18 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 06:23:18 Check angles 06:23:18 SkyScan query 06:23:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.18<-16412 Statuses=0008 0009 06:23:19 Msec=1500 True Az=112.995 Ze=-66.18 Az status=0008 Ze status=0009 06:23:19 Check angles 06:23:19 SkyScan query 06:23:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.135<-17809 Statuses=0008 0009 06:23:19 Msec=2250 True Az=112.995 Ze=-87.135 Az status=0008 Ze status=0009 06:23:20 Check angles 06:23:20 SkyScan query 06:23:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.09<-19206 Statuses=0008 0009 06:23:20 Msec=3000 True Az=112.995 Ze=-108.09 Az status=0008 Ze status=0009 06:23:20 Check angles 06:23:20 SkyScan query 06:23:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.03<-20602 Statuses=0008 0009 06:23:21 Msec=3750 True Az=112.995 Ze=-129.03 Az status=0008 Ze status=0009 06:23:21 Check angles 06:23:21 SkyScan query 06:23:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.45<-22030 Statuses=0008 0009 06:23:22 Msec=4500 True Az=112.995 Ze=-150.45 Az status=0008 Ze status=0009 06:23:22 Check angles 06:23:22 SkyScan query 06:23:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0008 0009 06:23:23 Msec=5250 True Az=112.995 Ze=-171.195 Az status=0008 Ze status=0009 06:23:23 Check angles 06:23:23 SkyScan query 06:23:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:23:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:23:23 Message to Master queued w/err=0: serial=96858 error=0 06:23:28 Received message from Master: op=Filter serial=96859 06:23:28 Color wheel filter change from 0 to 0 06:23:28 FLIGetFilterPos err=0 currentPosition=0 06:23:28 FLIGetStepsRemaining err=0 RemainingSteps=0 06:23:28 Filter is already there-color wheel unchanged 06:23:28 Received message from Master: op=Shutter serial=96860 06:23:28 Shutter LASER open 06:23:29 Received message from Camera: op=State serial=96862 06:23:29 GetSingleValue result=40 Value=cccccccc 06:23:29 SkyScan query 06:23:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:23:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:29 Parameters OK 06:23:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:29 Set A/D data flow result=40 06:23:29 Set A/D channel type result=40 06:23:29 Set A/D encoding result=40 06:23:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:29 Set channel filter=0.000000e+000 result=40 06:23:29 Config A/D Result=40 06:23:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:29 Get A/D filter: -9.255963e+061 result=40 06:23:29 Get A/D value=-858993460 result=40 06:23:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:29 Parameters OK 06:23:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:29 Set A/D data flow result=40 06:23:29 Set A/D channel type result=40 06:23:29 Set A/D encoding result=40 06:23:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:29 Set channel filter=0.000000e+000 result=40 06:23:29 Config A/D Result=40 06:23:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:29 Get A/D filter: -9.255963e+061 result=40 06:23:29 Get A/D value=-858993460 result=40 06:23:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:29 Aux= 06:23:29 Message to Camera, serial 96862 queued 06:23:38 Received message from Master: op=Shutter serial=96872 06:23:38 Shutter LASER close 06:23:38 Received message from Master: op=PointingHead serial=96876 06:23:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:23:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:23:39 Point started: ret=0 06:23:39 point_skyscan result=0 06:23:39 Check angles 06:23:39 SkyScan query 06:23:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 06:23:40 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 06:23:40 Check angles 06:23:40 SkyScan query 06:23:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.49<-20166 Statuses=0008 0009 06:23:41 Msec=750 True Az=112.995 Ze=-122.49 Az status=0008 Ze status=0009 06:23:41 Check angles 06:23:41 SkyScan query 06:23:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.46<-18764 Statuses=0008 0009 06:23:41 Msec=1500 True Az=112.995 Ze=-101.46 Az status=0008 Ze status=0009 06:23:42 Check angles 06:23:42 SkyScan query 06:23:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.535<-17369 Statuses=0008 0009 06:23:42 Msec=2250 True Az=112.995 Ze=-80.535 Az status=0008 Ze status=0009 06:23:42 Check angles 06:23:42 SkyScan query 06:23:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.565<-15971 Statuses=0008 0009 06:23:43 Msec=3000 True Az=112.995 Ze=-59.565 Az status=0008 Ze status=0009 06:23:43 Check angles 06:23:43 SkyScan query 06:23:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.16<-14544 Statuses=0008 0009 06:23:44 Msec=3750 True Az=112.995 Ze=-38.16 Az status=0008 Ze status=0009 06:23:44 Check angles 06:23:44 SkyScan query 06:23:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.22<-13148 Statuses=0008 0009 06:23:44 Msec=4500 True Az=112.995 Ze=-17.22 Az status=0008 Ze status=0009 06:23:45 Check angles 06:23:45 SkyScan query 06:23:45 SkyScan query done: ret=0 az=112.995<-7533 ze=3.75<-11750 Statuses=0008 0009 06:23:45 Msec=5250 True Az=112.995 Ze=3.75 Az status=0008 Ze status=0009 06:23:45 Check angles 06:23:45 SkyScan query 06:23:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:23:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:23:46 Message to Master queued w/err=0: serial=96876 error=0 [UTC 2019-3-4 06:23:50] 06:23:51 Received message from Master: op=Filter serial=96877 06:23:51 Color wheel filter change from 0 to 0 06:23:51 FLIGetFilterPos err=0 currentPosition=0 06:23:51 FLIGetStepsRemaining err=0 RemainingSteps=0 06:23:51 Filter is already there-color wheel unchanged 06:23:51 Received message from Master: op=Shutter serial=96878 06:23:51 Shutter LASER close 06:23:51 Received message from Camera: op=State serial=96880 06:23:51 GetSingleValue result=40 Value=cccccccc 06:23:51 SkyScan query 06:23:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:23:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:52 Parameters OK 06:23:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:52 Set A/D data flow result=40 06:23:52 Set A/D channel type result=40 06:23:52 Set A/D encoding result=40 06:23:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:52 Set channel filter=0.000000e+000 result=40 06:23:52 Config A/D Result=40 06:23:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:52 Get A/D filter: -9.255963e+061 result=40 06:23:52 Get A/D value=-858993460 result=40 06:23:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:52 Parameters OK 06:23:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:52 Set A/D data flow result=40 06:23:52 Set A/D channel type result=40 06:23:52 Set A/D encoding result=40 06:23:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:52 Set channel filter=0.000000e+000 result=40 06:23:52 Config A/D Result=40 06:23:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:52 Get A/D filter: -9.255963e+061 result=40 06:23:52 Get A/D value=-858993460 result=40 06:23:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:52 Aux= 06:23:52 Message to Camera, serial 96880 queued 06:24:29 Received message from Master: op=PointingHead serial=96893 06:24:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:24:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:24:29 Point started: ret=0 06:24:29 point_skyscan result=0 06:24:30 Check angles 06:24:30 SkyScan query 06:24:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:24:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:24:30 Message to Master queued w/err=0: serial=96893 error=0 06:24:35 Received message from Master: op=Filter serial=96894 06:24:35 Color wheel filter change from 0 to 0 06:24:35 FLIGetFilterPos err=0 currentPosition=0 06:24:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:24:35 Filter is already there-color wheel unchanged 06:24:36 Received message from Master: op=Shutter serial=96895 06:24:36 Shutter LASER close 06:24:36 Received message from Camera: op=State serial=96897 06:24:36 GetSingleValue result=40 Value=cccccccc 06:24:36 SkyScan query 06:24:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:24:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:36 Parameters OK 06:24:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:36 Set A/D data flow result=40 06:24:36 Set A/D channel type result=40 06:24:36 Set A/D encoding result=40 06:24:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:36 Set channel filter=0.000000e+000 result=40 06:24:36 Config A/D Result=40 06:24:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:36 Get A/D filter: -9.255963e+061 result=40 06:24:36 Get A/D value=-858993460 result=40 06:24:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:36 Parameters OK 06:24:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:36 Set A/D data flow result=40 06:24:36 Set A/D channel type result=40 06:24:36 Set A/D encoding result=40 06:24:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:36 Set channel filter=0.000000e+000 result=40 06:24:36 Config A/D Result=40 06:24:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:36 Get A/D filter: -9.255963e+061 result=40 06:24:36 Get A/D value=-858993460 result=40 06:24:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:24:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:24:36 Aux= 06:24:36 Message to Camera, serial 96897 queued 06:25:13 Received message from Master: op=PointingHead serial=96910 06:25:13 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:25:13 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:25:13 Point started: ret=0 06:25:13 point_skyscan result=0 06:25:14 Check angles 06:25:14 SkyScan query 06:25:15 SkyScan query done: ret=0 az=135.75<-9050 ze=-6.51<-12434 Statuses=0009 0008 06:25:15 Msec=0 True Az=135.75 Ze=-6.51 Az status=0009 Ze status=0008 06:25:15 Check angles 06:25:15 SkyScan query 06:25:15 SkyScan query done: ret=0 az=153.27<-10218 ze=-6.495<-12433 Statuses=0009 0008 06:25:15 Msec=750 True Az=153.27 Ze=-6.495 Az status=0009 Ze status=0008 06:25:16 Check angles 06:25:16 SkyScan query 06:25:16 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 06:25:16 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 06:25:16 Check angles 06:25:16 SkyScan query 06:25:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:25:17 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:25:17 Message to Master queued w/err=0: serial=96910 error=0 06:25:22 Received message from Master: op=Filter serial=96911 06:25:22 Color wheel filter change from 0 to 0 06:25:22 FLIGetFilterPos err=0 currentPosition=0 06:25:22 FLIGetStepsRemaining err=0 RemainingSteps=0 06:25:22 Filter is already there-color wheel unchanged 06:25:22 Received message from Master: op=Shutter serial=96912 06:25:22 Shutter LASER close 06:25:22 Received message from Camera: op=State serial=96914 06:25:22 GetSingleValue result=40 Value=cccccccc 06:25:22 SkyScan query 06:25:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:25:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:23 Parameters OK 06:25:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:23 Set A/D data flow result=40 06:25:23 Set A/D channel type result=40 06:25:23 Set A/D encoding result=40 06:25:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:23 Set channel filter=0.000000e+000 result=40 06:25:23 Config A/D Result=40 06:25:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:23 Get A/D filter: -9.255963e+061 result=40 06:25:23 Get A/D value=-858993460 result=40 06:25:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:23 Parameters OK 06:25:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:23 Set A/D data flow result=40 06:25:23 Set A/D channel type result=40 06:25:23 Set A/D encoding result=40 06:25:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:23 Set channel filter=0.000000e+000 result=40 06:25:23 Config A/D Result=40 06:25:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:23 Get A/D filter: -9.255963e+061 result=40 06:25:23 Get A/D value=-858993460 result=40 06:25:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:25:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:25:23 Aux= 06:25:23 Message to Camera, serial 96914 queued 06:26:00 Received message from Master: op=PointingHead serial=96927 06:26:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:26:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:26:00 Point started: ret=0 06:26:00 point_skyscan result=0 06:26:01 Check angles 06:26:01 SkyScan query 06:26:01 SkyScan query done: ret=0 az=153.075<-10205 ze=6.51<-11566 Statuses=0009 0008 06:26:01 Msec=0 True Az=153.075 Ze=6.51 Az status=0009 Ze status=0008 06:26:01 Check angles 06:26:01 SkyScan query 06:26:02 SkyScan query done: ret=0 az=135.615<-9041 ze=6.495<-11567 Statuses=0009 0008 06:26:02 Msec=750 True Az=135.615 Ze=6.495 Az status=0009 Ze status=0008 06:26:02 Check angles 06:26:02 SkyScan query 06:26:03 SkyScan query done: ret=0 az=118.14<-7876 ze=6.495<-11567 Statuses=0009 0008 06:26:03 Msec=1500 True Az=118.14 Ze=6.495 Az status=0009 Ze status=0008 06:26:03 Check angles 06:26:03 SkyScan query 06:26:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:26:04 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:26:04 Message to Master queued w/err=0: serial=96927 error=0 06:26:09 Received message from Master: op=Filter serial=96928 06:26:09 Color wheel filter change from 0 to 0 06:26:09 FLIGetFilterPos err=0 currentPosition=0 06:26:09 FLIGetStepsRemaining err=0 RemainingSteps=0 06:26:09 Filter is already there-color wheel unchanged 06:26:09 Received message from Master: op=Shutter serial=96929 06:26:09 Shutter LASER close 06:26:09 Received message from Camera: op=State serial=96931 06:26:09 GetSingleValue result=40 Value=cccccccc 06:26:09 SkyScan query 06:26:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:26:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:09 Parameters OK 06:26:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:09 Set A/D data flow result=40 06:26:09 Set A/D channel type result=40 06:26:09 Set A/D encoding result=40 06:26:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:09 Set channel filter=0.000000e+000 result=40 06:26:09 Config A/D Result=40 06:26:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:09 Get A/D filter: -9.255963e+061 result=40 06:26:09 Get A/D value=-858993460 result=40 06:26:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:09 Parameters OK 06:26:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:09 Set A/D data flow result=40 06:26:09 Set A/D channel type result=40 06:26:09 Set A/D encoding result=40 06:26:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:09 Set channel filter=0.000000e+000 result=40 06:26:09 Config A/D Result=40 06:26:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:09 Get A/D filter: -9.255963e+061 result=40 06:26:09 Get A/D value=-858993460 result=40 06:26:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:26:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:26:09 Aux= 06:26:09 Message to Camera, serial 96931 queued 06:26:46 Received message from Master: op=PointingHead serial=96944 06:26:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:26:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:26:46 Point started: ret=0 06:26:46 point_skyscan result=0 06:26:47 Check angles 06:26:47 SkyScan query 06:26:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.025<-13535 Statuses=0008 0009 06:26:48 Msec=0 True Az=112.995 Ze=-23.025 Az status=0008 Ze status=0009 06:26:48 Check angles 06:26:48 SkyScan query 06:26:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.07<-14938 Statuses=0008 0009 06:26:49 Msec=750 True Az=112.995 Ze=-44.07 Az status=0008 Ze status=0009 06:26:49 Check angles 06:26:49 SkyScan query 06:26:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.965<-16331 Statuses=0008 0009 06:26:49 Msec=1500 True Az=112.995 Ze=-64.965 Az status=0008 Ze status=0009 06:26:49 Check angles 06:26:49 SkyScan query 06:26:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.965<-17731 Statuses=0008 0009 06:26:50 Msec=2250 True Az=112.995 Ze=-85.965 Az status=0008 Ze status=0009 06:26:50 Check angles 06:26:50 SkyScan query 06:26:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.875<-19125 Statuses=0008 0009 06:26:51 Msec=3000 True Az=112.995 Ze=-106.875 Az status=0008 Ze status=0009 06:26:51 Check angles 06:26:51 SkyScan query 06:26:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.845<-20523 Statuses=0008 0009 06:26:52 Msec=3750 True Az=112.995 Ze=-127.845 Az status=0008 Ze status=0009 06:26:52 Check angles 06:26:52 SkyScan query 06:26:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.77<-21918 Statuses=0008 0009 06:26:52 Msec=4500 True Az=112.995 Ze=-148.77 Az status=0008 Ze status=0009 06:26:52 Check angles 06:26:52 SkyScan query 06:26:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.725<-23315 Statuses=0008 0009 06:26:53 Msec=5250 True Az=112.995 Ze=-169.725 Az status=0008 Ze status=0009 06:26:53 Check angles 06:26:53 SkyScan query 06:26:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:26:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:26:54 Message to Master queued w/err=0: serial=96944 error=0 06:26:59 Received message from Master: op=Filter serial=96945 06:26:59 Color wheel filter change from 0 to 0 06:26:59 FLIGetFilterPos err=0 currentPosition=0 06:26:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:26:59 Filter is already there-color wheel unchanged 06:26:59 Received message from Master: op=Shutter serial=96946 06:26:59 Shutter LASER open 06:26:59 Received message from Camera: op=State serial=96948 06:26:59 GetSingleValue result=40 Value=cccccccc 06:26:59 SkyScan query 06:27:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:27:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:00 Parameters OK 06:27:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:00 Set A/D data flow result=40 06:27:00 Set A/D channel type result=40 06:27:00 Set A/D encoding result=40 06:27:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:00 Set channel filter=0.000000e+000 result=40 06:27:00 Config A/D Result=40 06:27:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:00 Get A/D filter: -9.255963e+061 result=40 06:27:00 Get A/D value=-858993460 result=40 06:27:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:00 Parameters OK 06:27:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:00 Set A/D data flow result=40 06:27:00 Set A/D channel type result=40 06:27:00 Set A/D encoding result=40 06:27:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:00 Set channel filter=0.000000e+000 result=40 06:27:00 Config A/D Result=40 06:27:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:00 Get A/D filter: -9.255963e+061 result=40 06:27:00 Get A/D value=-858993460 result=40 06:27:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:27:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:27:00 Aux= 06:27:00 Message to Camera, serial 96948 queued 06:27:08 Received message from Master: op=Shutter serial=96958 06:27:08 Shutter LASER close 06:27:09 Received message from Master: op=PointingHead serial=96962 06:27:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:27:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:27:09 Point started: ret=0 06:27:09 point_skyscan result=0 06:27:10 Check angles 06:27:10 SkyScan query 06:27:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 06:27:10 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 06:27:10 Check angles 06:27:10 SkyScan query 06:27:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.445<-20163 Statuses=0008 0009 06:27:11 Msec=750 True Az=112.995 Ze=-122.445 Az status=0008 Ze status=0009 06:27:11 Check angles 06:27:11 SkyScan query 06:27:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.46<-18764 Statuses=0008 0009 06:27:12 Msec=1500 True Az=112.995 Ze=-101.46 Az status=0008 Ze status=0009 06:27:12 Check angles 06:27:12 SkyScan query 06:27:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.49<-17366 Statuses=0008 0009 06:27:13 Msec=2250 True Az=112.995 Ze=-80.49 Az status=0008 Ze status=0009 06:27:13 Check angles 06:27:13 SkyScan query 06:27:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.535<-15969 Statuses=0008 0009 06:27:13 Msec=3000 True Az=112.995 Ze=-59.535 Az status=0008 Ze status=0009 06:27:13 Check angles 06:27:13 SkyScan query 06:27:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.595<-14573 Statuses=0008 0009 06:27:14 Msec=3750 True Az=112.995 Ze=-38.595 Az status=0008 Ze status=0009 06:27:14 Check angles 06:27:14 SkyScan query 06:27:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.625<-13175 Statuses=0008 0009 06:27:15 Msec=4500 True Az=112.995 Ze=-17.625 Az status=0008 Ze status=0009 06:27:15 Check angles 06:27:15 SkyScan query 06:27:16 SkyScan query done: ret=0 az=112.995<-7533 ze=3.78<-11748 Statuses=0008 0009 06:27:16 Msec=5250 True Az=112.995 Ze=3.78 Az status=0008 Ze status=0009 06:27:16 Check angles 06:27:16 SkyScan query 06:27:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:27:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:27:16 Message to Master queued w/err=0: serial=96962 error=0 06:27:21 Received message from Master: op=Filter serial=96963 06:27:21 Color wheel filter change from 0 to 0 06:27:21 FLIGetFilterPos err=0 currentPosition=0 06:27:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:27:21 Filter is already there-color wheel unchanged 06:27:21 Received message from Master: op=Shutter serial=96964 06:27:21 Shutter LASER close 06:27:22 Received message from Camera: op=State serial=96966 06:27:22 GetSingleValue result=40 Value=cccccccc 06:27:22 SkyScan query 06:27:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:27:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:22 Parameters OK 06:27:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:22 Set A/D data flow result=40 06:27:22 Set A/D channel type result=40 06:27:22 Set A/D encoding result=40 06:27:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:22 Set channel filter=0.000000e+000 result=40 06:27:22 Config A/D Result=40 06:27:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:22 Get A/D filter: -9.255963e+061 result=40 06:27:22 Get A/D value=-858993460 result=40 06:27:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:22 Parameters OK 06:27:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:22 Set A/D data flow result=40 06:27:22 Set A/D channel type result=40 06:27:22 Set A/D encoding result=40 06:27:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:22 Set channel filter=0.000000e+000 result=40 06:27:22 Config A/D Result=40 06:27:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:22 Get A/D filter: -9.255963e+061 result=40 06:27:22 Get A/D value=-858993460 result=40 06:27:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:27:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:27:22 Aux= 06:27:22 Message to Camera, serial 96966 queued 06:27:59 Received message from Master: op=PointingHead serial=96979 06:27:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:27:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:27:59 Point started: ret=0 06:27:59 point_skyscan result=0 06:28:00 Check angles 06:28:00 SkyScan query 06:28:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:28:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:28:01 Message to Master queued w/err=0: serial=96979 error=0 06:28:06 Received message from Master: op=Filter serial=96980 06:28:06 Color wheel filter change from 0 to 0 06:28:06 FLIGetFilterPos err=0 currentPosition=0 06:28:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:06 Filter is already there-color wheel unchanged 06:28:06 Received message from Master: op=Shutter serial=96981 06:28:06 Shutter LASER close 06:28:06 Received message from Camera: op=State serial=96983 06:28:06 GetSingleValue result=40 Value=cccccccc 06:28:06 SkyScan query 06:28:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:28:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:06 Parameters OK 06:28:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:06 Set A/D data flow result=40 06:28:06 Set A/D channel type result=40 06:28:06 Set A/D encoding result=40 06:28:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:06 Set channel filter=0.000000e+000 result=40 06:28:06 Config A/D Result=40 06:28:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:06 Get A/D filter: -9.255963e+061 result=40 06:28:06 Get A/D value=-858993460 result=40 06:28:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:06 Parameters OK 06:28:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:06 Set A/D data flow result=40 06:28:06 Set A/D channel type result=40 06:28:06 Set A/D encoding result=40 06:28:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:06 Set channel filter=0.000000e+000 result=40 06:28:06 Config A/D Result=40 06:28:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:06 Get A/D filter: -9.255963e+061 result=40 06:28:06 Get A/D value=-858993460 result=40 06:28:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:06 Aux= 06:28:06 Message to Camera, serial 96983 queued 06:28:43 Received message from Master: op=PointingHead serial=96996 06:28:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:28:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:28:44 Point started: ret=0 06:28:44 point_skyscan result=0 06:28:44 Check angles 06:28:44 SkyScan query 06:28:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:28:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:28:45 Message to Master queued w/err=0: serial=96996 error=0 06:28:50 Received message from Master: op=Filter serial=96997 06:28:50 Color wheel filter change from 0 to 0 06:28:50 FLIGetFilterPos err=0 currentPosition=0 06:28:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:50 Filter is already there-color wheel unchanged 06:28:50 Received message from Master: op=Shutter serial=96998 06:28:50 Shutter LASER close 06:28:50 Received message from Camera: op=State serial=97000 06:28:50 GetSingleValue result=40 Value=cccccccc 06:28:50 SkyScan query 06:28:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:28:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:51 Parameters OK 06:28:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:51 Set A/D data flow result=40 06:28:51 Set A/D channel type result=40 06:28:51 Set A/D encoding result=40 06:28:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:51 Set channel filter=0.000000e+000 result=40 06:28:51 Config A/D Result=40 06:28:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:51 Get A/D filter: -9.255963e+061 result=40 06:28:51 Get A/D value=-858993460 result=40 06:28:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:51 Parameters OK 06:28:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:51 Set A/D data flow result=40 06:28:51 Set A/D channel type result=40 06:28:51 Set A/D encoding result=40 06:28:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:51 Set channel filter=0.000000e+000 result=40 06:28:51 Config A/D Result=40 06:28:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:51 Get A/D filter: -9.255963e+061 result=40 06:28:51 Get A/D value=-858993460 result=40 06:28:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:51 Aux= 06:28:51 Message to Camera, serial 97000 queued 06:29:28 Received message from Master: op=PointingHead serial=97013 06:29:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:29:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:29:28 Point started: ret=0 06:29:28 point_skyscan result=0 06:29:29 Check angles 06:29:29 SkyScan query 06:29:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:29:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:29:29 Message to Master queued w/err=0: serial=97013 error=0 06:29:34 Received message from Master: op=Filter serial=97014 06:29:34 Color wheel filter change from 0 to 0 06:29:34 FLIGetFilterPos err=0 currentPosition=0 06:29:34 FLIGetStepsRemaining err=0 RemainingSteps=0 06:29:34 Filter is already there-color wheel unchanged 06:29:35 Received message from Master: op=Shutter serial=97015 06:29:35 Shutter LASER close 06:29:35 Received message from Camera: op=State serial=97017 06:29:35 GetSingleValue result=40 Value=cccccccc 06:29:35 SkyScan query 06:29:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:29:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:35 Parameters OK 06:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:35 Set A/D data flow result=40 06:29:35 Set A/D channel type result=40 06:29:35 Set A/D encoding result=40 06:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:35 Set channel filter=0.000000e+000 result=40 06:29:35 Config A/D Result=40 06:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:35 Get A/D filter: -9.255963e+061 result=40 06:29:35 Get A/D value=-858993460 result=40 06:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:35 Parameters OK 06:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:35 Set A/D data flow result=40 06:29:35 Set A/D channel type result=40 06:29:35 Set A/D encoding result=40 06:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:35 Set channel filter=0.000000e+000 result=40 06:29:35 Config A/D Result=40 06:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:35 Get A/D filter: -9.255963e+061 result=40 06:29:35 Get A/D value=-858993460 result=40 06:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:29:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:29:35 Aux= 06:29:35 Message to Camera, serial 97017 queued 06:30:11 Received message from Master: op=PointingHead serial=97029 06:30:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:30:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:30:11 Point started: ret=0 06:30:11 point_skyscan result=0 06:30:12 Check angles 06:30:12 SkyScan query 06:30:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 06:30:13 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 06:30:13 Check angles 06:30:13 SkyScan query 06:30:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 06:30:13 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 06:30:14 Check angles 06:30:14 SkyScan query 06:30:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.835<-16389 Statuses=0008 0009 06:30:14 Msec=1500 True Az=112.995 Ze=-65.835 Az status=0008 Ze status=0009 06:30:14 Check angles 06:30:14 SkyScan query 06:30:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.15<-17810 Statuses=0008 0009 06:30:15 Msec=2250 True Az=112.995 Ze=-87.15 Az status=0008 Ze status=0009 06:30:15 Check angles 06:30:15 SkyScan query 06:30:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.105<-19207 Statuses=0008 0009 06:30:16 Msec=3000 True Az=112.995 Ze=-108.105 Az status=0008 Ze status=0009 06:30:16 Check angles 06:30:16 SkyScan query 06:30:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.045<-20603 Statuses=0008 0009 06:30:16 Msec=3750 True Az=112.995 Ze=-129.045 Az status=0008 Ze status=0009 06:30:17 Check angles 06:30:17 SkyScan query 06:30:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.03<-22002 Statuses=0008 0009 06:30:17 Msec=4500 True Az=112.995 Ze=-150.03 Az status=0008 Ze status=0009 06:30:17 Check angles 06:30:17 SkyScan query 06:30:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.865<-23391 Statuses=0008 0009 06:30:18 Msec=5250 True Az=112.995 Ze=-170.865 Az status=0008 Ze status=0009 06:30:18 Check angles 06:30:18 SkyScan query 06:30:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:30:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:30:19 Message to Master queued w/err=0: serial=97029 error=0 06:30:24 Received message from Master: op=Filter serial=97030 06:30:24 Color wheel filter change from 0 to 0 06:30:24 FLIGetFilterPos err=0 currentPosition=0 06:30:24 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:24 Filter is already there-color wheel unchanged 06:30:24 Received message from Master: op=Shutter serial=97031 06:30:24 Shutter LASER open 06:30:24 Received message from Camera: op=State serial=97033 06:30:24 GetSingleValue result=40 Value=cccccccc 06:30:24 SkyScan query 06:30:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:30:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:25 Parameters OK 06:30:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:25 Set A/D data flow result=40 06:30:25 Set A/D channel type result=40 06:30:25 Set A/D encoding result=40 06:30:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:25 Set channel filter=0.000000e+000 result=40 06:30:25 Config A/D Result=40 06:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:25 Get A/D filter: -9.255963e+061 result=40 06:30:25 Get A/D value=-858993460 result=40 06:30:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:25 Parameters OK 06:30:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:25 Set A/D data flow result=40 06:30:25 Set A/D channel type result=40 06:30:25 Set A/D encoding result=40 06:30:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:25 Set channel filter=0.000000e+000 result=40 06:30:25 Config A/D Result=40 06:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:25 Get A/D filter: -9.255963e+061 result=40 06:30:25 Get A/D value=-858993460 result=40 06:30:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:25 Aux= 06:30:25 Message to Camera, serial 97033 queued 06:30:33 Received message from Master: op=Shutter serial=97043 06:30:33 Shutter LASER close 06:30:34 Received message from Master: op=PointingHead serial=97047 06:30:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:30:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:30:34 Point started: ret=0 06:30:34 point_skyscan result=0 06:30:35 Check angles 06:30:35 SkyScan query 06:30:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 06:30:35 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 06:30:36 Check angles 06:30:36 SkyScan query 06:30:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.22<-20148 Statuses=0008 0009 06:30:36 Msec=750 True Az=112.995 Ze=-122.22 Az status=0008 Ze status=0009 06:30:36 Check angles 06:30:36 SkyScan query 06:30:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.265<-18751 Statuses=0008 0009 06:30:37 Msec=1500 True Az=112.995 Ze=-101.265 Az status=0008 Ze status=0009 06:30:37 Check angles 06:30:37 SkyScan query 06:30:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.31<-17354 Statuses=0008 0009 06:30:38 Msec=2250 True Az=112.995 Ze=-80.31 Az status=0008 Ze status=0009 06:30:38 Check angles 06:30:38 SkyScan query 06:30:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.355<-15957 Statuses=0008 0009 06:30:38 Msec=3000 True Az=112.995 Ze=-59.355 Az status=0008 Ze status=0009 06:30:39 Check angles 06:30:39 SkyScan query 06:30:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.385<-14559 Statuses=0008 0009 06:30:39 Msec=3750 True Az=112.995 Ze=-38.385 Az status=0008 Ze status=0009 06:30:39 Check angles 06:30:39 SkyScan query 06:30:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.445<-13163 Statuses=0008 0009 06:30:40 Msec=4500 True Az=112.995 Ze=-17.445 Az status=0008 Ze status=0009 06:30:40 Check angles 06:30:40 SkyScan query 06:30:41 SkyScan query done: ret=0 az=112.995<-7533 ze=3.975<-11735 Statuses=0008 0009 06:30:41 Msec=5250 True Az=112.995 Ze=3.975 Az status=0008 Ze status=0009 06:30:41 Check angles 06:30:41 SkyScan query 06:30:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:30:41 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:30:41 Message to Master queued w/err=0: serial=97047 error=0 06:30:46 Received message from Master: op=Filter serial=97048 06:30:46 Color wheel filter change from 0 to 0 06:30:46 FLIGetFilterPos err=0 currentPosition=0 06:30:46 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:46 Filter is already there-color wheel unchanged 06:30:47 Received message from Master: op=Shutter serial=97049 06:30:47 Shutter LASER close 06:30:47 Received message from Camera: op=State serial=97051 06:30:47 GetSingleValue result=40 Value=cccccccc 06:30:47 SkyScan query 06:30:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:30:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:47 Parameters OK 06:30:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:47 Set A/D data flow result=40 06:30:47 Set A/D channel type result=40 06:30:47 Set A/D encoding result=40 06:30:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:47 Set channel filter=0.000000e+000 result=40 06:30:47 Config A/D Result=40 06:30:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:47 Get A/D filter: -9.255963e+061 result=40 06:30:47 Get A/D value=-858993460 result=40 06:30:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:47 Parameters OK 06:30:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:47 Set A/D data flow result=40 06:30:47 Set A/D channel type result=40 06:30:47 Set A/D encoding result=40 06:30:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:47 Set channel filter=0.000000e+000 result=40 06:30:47 Config A/D Result=40 06:30:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:47 Get A/D filter: -9.255963e+061 result=40 06:30:47 Get A/D value=-858993460 result=40 06:30:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:47 Aux= 06:30:47 Message to Camera, serial 97051 queued 06:31:24 Received message from Master: op=PointingHead serial=97064 06:31:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:31:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:31:24 Point started: ret=0 06:31:24 point_skyscan result=0 06:31:25 Check angles 06:31:25 SkyScan query 06:31:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:31:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:31:26 Message to Master queued w/err=0: serial=97064 error=0 06:31:31 Received message from Master: op=Filter serial=97065 06:31:31 Color wheel filter change from 0 to 0 06:31:31 FLIGetFilterPos err=0 currentPosition=0 06:31:31 FLIGetStepsRemaining err=0 RemainingSteps=0 06:31:31 Filter is already there-color wheel unchanged 06:31:31 Received message from Master: op=Shutter serial=97066 06:31:31 Shutter LASER close 06:31:31 Received message from Camera: op=State serial=97068 06:31:31 GetSingleValue result=40 Value=cccccccc 06:31:31 SkyScan query 06:31:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:31:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:32 Parameters OK 06:31:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:32 Set A/D data flow result=40 06:31:32 Set A/D channel type result=40 06:31:32 Set A/D encoding result=40 06:31:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:32 Set channel filter=0.000000e+000 result=40 06:31:32 Config A/D Result=40 06:31:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:32 Get A/D filter: -9.255963e+061 result=40 06:31:32 Get A/D value=-858993460 result=40 06:31:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:32 Parameters OK 06:31:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:32 Set A/D data flow result=40 06:31:32 Set A/D channel type result=40 06:31:32 Set A/D encoding result=40 06:31:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:32 Set channel filter=0.000000e+000 result=40 06:31:32 Config A/D Result=40 06:31:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:32 Get A/D filter: -9.255963e+061 result=40 06:31:32 Get A/D value=-858993460 result=40 06:31:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:31:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:31:32 Aux= 06:31:32 Message to Camera, serial 97068 queued 06:32:08 Received message from Master: op=PointingHead serial=97081 06:32:08 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:32:08 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:32:09 Point started: ret=0 06:32:09 point_skyscan result=0 06:32:09 Check angles 06:32:09 SkyScan query 06:32:10 SkyScan query done: ret=0 az=135.825<-9055 ze=-6.51<-12434 Statuses=0009 0008 06:32:10 Msec=0 True Az=135.825 Ze=-6.51 Az status=0009 Ze status=0008 06:32:10 Check angles 06:32:10 SkyScan query 06:32:11 SkyScan query done: ret=0 az=153.285<-10219 ze=-6.495<-12433 Statuses=0009 0008 06:32:11 Msec=750 True Az=153.285 Ze=-6.495 Az status=0009 Ze status=0008 06:32:11 Check angles 06:32:11 SkyScan query 06:32:12 SkyScan query done: ret=0 az=170.73<-11382 ze=-6.495<-12433 Statuses=0009 0008 06:32:12 Msec=1500 True Az=170.73 Ze=-6.495 Az status=0009 Ze status=0008 06:32:12 Check angles 06:32:12 SkyScan query 06:32:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:32:12 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:32:12 Message to Master queued w/err=0: serial=97081 error=0 06:32:17 Received message from Master: op=Filter serial=97082 06:32:17 Color wheel filter change from 0 to 0 06:32:17 FLIGetFilterPos err=0 currentPosition=0 06:32:17 FLIGetStepsRemaining err=0 RemainingSteps=0 06:32:17 Filter is already there-color wheel unchanged 06:32:17 Received message from Master: op=Shutter serial=97083 06:32:17 Shutter LASER close 06:32:18 Received message from Camera: op=State serial=97085 06:32:18 GetSingleValue result=40 Value=cccccccc 06:32:18 SkyScan query 06:32:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:32:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:18 Parameters OK 06:32:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:18 Set A/D data flow result=40 06:32:18 Set A/D channel type result=40 06:32:18 Set A/D encoding result=40 06:32:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:18 Set channel filter=0.000000e+000 result=40 06:32:18 Config A/D Result=40 06:32:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:18 Get A/D filter: -9.255963e+061 result=40 06:32:18 Get A/D value=-858993460 result=40 06:32:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:18 Parameters OK 06:32:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:18 Set A/D data flow result=40 06:32:18 Set A/D channel type result=40 06:32:18 Set A/D encoding result=40 06:32:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:18 Set channel filter=0.000000e+000 result=40 06:32:18 Config A/D Result=40 06:32:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:18 Get A/D filter: -9.255963e+061 result=40 06:32:18 Get A/D value=-858993460 result=40 06:32:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:32:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:32:18 Aux= 06:32:18 Message to Camera, serial 97085 queued 06:32:55 Received message from Master: op=PointingHead serial=97098 06:32:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:32:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:32:55 Point started: ret=0 06:32:55 point_skyscan result=0 06:32:56 Check angles 06:32:56 SkyScan query 06:32:57 SkyScan query done: ret=0 az=152.97<-10198 ze=6.51<-11566 Statuses=0009 0008 06:32:57 Msec=0 True Az=152.97 Ze=6.51 Az status=0009 Ze status=0008 06:32:57 Check angles 06:32:57 SkyScan query 06:32:57 SkyScan query done: ret=0 az=135.045<-9003 ze=6.495<-11567 Statuses=0009 0008 06:32:57 Msec=750 True Az=135.045 Ze=6.495 Az status=0009 Ze status=0008 06:32:58 Check angles 06:32:58 SkyScan query 06:32:58 SkyScan query done: ret=0 az=117.315<-7821 ze=6.495<-11567 Statuses=0009 0008 06:32:58 Msec=1500 True Az=117.315 Ze=6.495 Az status=0009 Ze status=0008 06:32:58 Check angles 06:32:58 SkyScan query 06:32:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:32:59 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:32:59 Message to Master queued w/err=0: serial=97098 error=0 06:33:04 Received message from Master: op=Filter serial=97099 06:33:04 Color wheel filter change from 0 to 0 06:33:04 FLIGetFilterPos err=0 currentPosition=0 06:33:04 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:04 Filter is already there-color wheel unchanged 06:33:04 Received message from Master: op=Shutter serial=97100 06:33:04 Shutter LASER close 06:33:04 Received message from Camera: op=State serial=97102 06:33:04 GetSingleValue result=40 Value=cccccccc 06:33:04 SkyScan query 06:33:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:33:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:05 Parameters OK 06:33:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:05 Set A/D data flow result=40 06:33:05 Set A/D channel type result=40 06:33:05 Set A/D encoding result=40 06:33:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:05 Set channel filter=0.000000e+000 result=40 06:33:05 Config A/D Result=40 06:33:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:05 Get A/D filter: -9.255963e+061 result=40 06:33:05 Get A/D value=-858993460 result=40 06:33:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:05 Parameters OK 06:33:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:05 Set A/D data flow result=40 06:33:05 Set A/D channel type result=40 06:33:05 Set A/D encoding result=40 06:33:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:05 Set channel filter=0.000000e+000 result=40 06:33:05 Config A/D Result=40 06:33:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:05 Get A/D filter: -9.255963e+061 result=40 06:33:05 Get A/D value=-858993460 result=40 06:33:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:05 Aux= 06:33:05 Message to Camera, serial 97102 queued 06:33:38 Received message from Master: op=Identify serial=97108 06:33:41 Received message from Master: op=PointingHead serial=97118 06:33:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:33:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:33:42 Point started: ret=0 06:33:42 point_skyscan result=0 06:33:43 Check angles 06:33:43 SkyScan query 06:33:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 06:33:43 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 06:33:43 Check angles 06:33:43 SkyScan query 06:33:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.775<-14985 Statuses=0008 0009 06:33:44 Msec=750 True Az=112.995 Ze=-44.775 Az status=0008 Ze status=0009 06:33:44 Check angles 06:33:44 SkyScan query 06:33:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.73<-16382 Statuses=0008 0009 06:33:45 Msec=1500 True Az=112.995 Ze=-65.73 Az status=0008 Ze status=0009 06:33:45 Check angles 06:33:45 SkyScan query 06:33:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.67<-17778 Statuses=0008 0009 06:33:45 Msec=2250 True Az=112.995 Ze=-86.67 Az status=0008 Ze status=0009 06:33:46 Check angles 06:33:46 SkyScan query 06:33:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.64<-19176 Statuses=0008 0009 06:33:46 Msec=3000 True Az=112.995 Ze=-107.64 Az status=0008 Ze status=0009 06:33:46 Check angles 06:33:46 SkyScan query 06:33:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.565<-20571 Statuses=0008 0009 06:33:47 Msec=3750 True Az=112.995 Ze=-128.565 Az status=0008 Ze status=0009 06:33:47 Check angles 06:33:47 SkyScan query 06:33:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.55<-21970 Statuses=0008 0009 06:33:48 Msec=4500 True Az=112.995 Ze=-149.55 Az status=0008 Ze status=0009 06:33:48 Check angles 06:33:48 SkyScan query 06:33:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.46<-23364 Statuses=0008 0009 06:33:48 Msec=5250 True Az=112.995 Ze=-170.46 Az status=0008 Ze status=0009 06:33:49 Check angles 06:33:49 SkyScan query 06:33:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:33:49 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:33:49 Message to Master queued w/err=0: serial=97118 error=0 06:33:54 Received message from Master: op=Filter serial=97119 06:33:54 Color wheel filter change from 0 to 0 06:33:54 FLIGetFilterPos err=0 currentPosition=0 06:33:54 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:54 Filter is already there-color wheel unchanged 06:33:54 Received message from Master: op=Shutter serial=97120 06:33:54 Shutter LASER open 06:33:55 Received message from Camera: op=State serial=97122 06:33:55 GetSingleValue result=40 Value=cccccccc 06:33:55 SkyScan query 06:33:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:33:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:55 Parameters OK 06:33:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:55 Set A/D data flow result=40 06:33:55 Set A/D channel type result=40 06:33:55 Set A/D encoding result=40 06:33:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:55 Set channel filter=0.000000e+000 result=40 06:33:55 Config A/D Result=40 06:33:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:55 Get A/D filter: -9.255963e+061 result=40 06:33:55 Get A/D value=-858993460 result=40 06:33:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:55 Parameters OK 06:33:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:55 Set A/D data flow result=40 06:33:55 Set A/D channel type result=40 06:33:55 Set A/D encoding result=40 06:33:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:55 Set channel filter=0.000000e+000 result=40 06:33:55 Config A/D Result=40 06:33:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:55 Get A/D filter: -9.255963e+061 result=40 06:33:55 Get A/D value=-858993460 result=40 06:33:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:55 Aux= 06:33:55 Message to Camera, serial 97122 queued 06:34:03 Received message from Master: op=Shutter serial=97131 06:34:03 Shutter LASER close 06:34:03 Received message from Master: op=PointingHead serial=97135 06:34:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:34:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:34:03 Point started: ret=0 06:34:03 point_skyscan result=0 06:34:04 Check angles 06:34:04 SkyScan query 06:34:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 06:34:05 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 06:34:05 Check angles 06:34:05 SkyScan query 06:34:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 06:34:05 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 06:34:06 Check angles 06:34:06 SkyScan query 06:34:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.38<-18692 Statuses=0008 0009 06:34:06 Msec=1500 True Az=112.995 Ze=-100.38 Az status=0008 Ze status=0009 06:34:06 Check angles 06:34:06 SkyScan query 06:34:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.44<-17296 Statuses=0008 0009 06:34:07 Msec=2250 True Az=112.995 Ze=-79.44 Az status=0008 Ze status=0009 06:34:07 Check angles 06:34:07 SkyScan query 06:34:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.515<-15901 Statuses=0008 0009 06:34:08 Msec=3000 True Az=112.995 Ze=-58.515 Az status=0008 Ze status=0009 06:34:08 Check angles 06:34:08 SkyScan query 06:34:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.56<-14504 Statuses=0008 0009 06:34:08 Msec=3750 True Az=112.995 Ze=-37.56 Az status=0008 Ze status=0009 [UTC 2019-3-4 06:34:09] 06:34:09 Check angles 06:34:09 SkyScan query 06:34:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-14.85<-12990 Statuses=0008 0009 06:34:09 Msec=4500 True Az=112.995 Ze=-14.85 Az status=0008 Ze status=0009 06:34:09 Check angles 06:34:09 SkyScan query 06:34:10 SkyScan query done: ret=0 az=112.995<-7533 ze=4.62<-11692 Statuses=0008 0009 06:34:10 Msec=5250 True Az=112.995 Ze=4.62 Az status=0008 Ze status=0009 06:34:10 Check angles 06:34:10 SkyScan query 06:34:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:34:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:34:11 Message to Master queued w/err=0: serial=97135 error=0 06:34:16 Received message from Master: op=Filter serial=97136 06:34:16 Color wheel filter change from 0 to 0 06:34:16 FLIGetFilterPos err=0 currentPosition=0 06:34:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:34:16 Filter is already there-color wheel unchanged 06:34:16 Received message from Master: op=Shutter serial=97137 06:34:16 Shutter LASER close 06:34:16 Received message from Camera: op=State serial=97139 06:34:16 GetSingleValue result=40 Value=cccccccc 06:34:16 SkyScan query 06:34:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:34:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:17 Parameters OK 06:34:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:17 Set A/D data flow result=40 06:34:17 Set A/D channel type result=40 06:34:17 Set A/D encoding result=40 06:34:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:17 Set channel filter=0.000000e+000 result=40 06:34:17 Config A/D Result=40 06:34:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:17 Get A/D filter: -9.255963e+061 result=40 06:34:17 Get A/D value=-858993460 result=40 06:34:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:17 Parameters OK 06:34:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:17 Set A/D data flow result=40 06:34:17 Set A/D channel type result=40 06:34:17 Set A/D encoding result=40 06:34:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:17 Set channel filter=0.000000e+000 result=40 06:34:17 Config A/D Result=40 06:34:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:17 Get A/D filter: -9.255963e+061 result=40 06:34:17 Get A/D value=-858993460 result=40 06:34:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:34:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:34:17 Aux= 06:34:17 Message to Camera, serial 97139 queued 06:34:53 Received message from Master: op=PointingHead serial=97152 06:34:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:34:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:34:54 Point started: ret=0 06:34:54 point_skyscan result=0 06:34:55 Check angles 06:34:55 SkyScan query 06:34:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:34:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:34:55 Message to Master queued w/err=0: serial=97152 error=0 06:35:00 Received message from Master: op=Filter serial=97153 06:35:00 Color wheel filter change from 0 to 0 06:35:00 FLIGetFilterPos err=0 currentPosition=0 06:35:00 FLIGetStepsRemaining err=0 RemainingSteps=0 06:35:00 Filter is already there-color wheel unchanged 06:35:00 Received message from Master: op=Shutter serial=97154 06:35:00 Shutter LASER close 06:35:00 Received message from Camera: op=State serial=97156 06:35:00 GetSingleValue result=40 Value=cccccccc 06:35:00 SkyScan query 06:35:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:35:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:01 Parameters OK 06:35:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:01 Set A/D data flow result=40 06:35:01 Set A/D channel type result=40 06:35:01 Set A/D encoding result=40 06:35:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:01 Set channel filter=0.000000e+000 result=40 06:35:01 Config A/D Result=40 06:35:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:01 Get A/D filter: -9.255963e+061 result=40 06:35:01 Get A/D value=-858993460 result=40 06:35:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:01 Parameters OK 06:35:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:01 Set A/D data flow result=40 06:35:01 Set A/D channel type result=40 06:35:01 Set A/D encoding result=40 06:35:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:01 Set channel filter=0.000000e+000 result=40 06:35:01 Config A/D Result=40 06:35:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:01 Get A/D filter: -9.255963e+061 result=40 06:35:01 Get A/D value=-858993460 result=40 06:35:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:35:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:35:01 Aux= 06:35:01 Message to Camera, serial 97156 queued 06:35:38 Received message from Master: op=PointingHead serial=97169 06:35:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:35:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:35:38 Point started: ret=0 06:35:38 point_skyscan result=0 06:35:39 Check angles 06:35:39 SkyScan query 06:35:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:35:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:35:39 Message to Master queued w/err=0: serial=97169 error=0 06:35:44 Received message from Master: op=Filter serial=97170 06:35:44 Color wheel filter change from 0 to 0 06:35:44 FLIGetFilterPos err=0 currentPosition=0 06:35:44 FLIGetStepsRemaining err=0 RemainingSteps=0 06:35:44 Filter is already there-color wheel unchanged 06:35:45 Received message from Master: op=Shutter serial=97171 06:35:45 Shutter LASER close 06:35:45 Received message from Camera: op=State serial=97173 06:35:45 GetSingleValue result=40 Value=cccccccc 06:35:45 SkyScan query 06:35:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:35:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:45 Parameters OK 06:35:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:45 Set A/D data flow result=40 06:35:45 Set A/D channel type result=40 06:35:45 Set A/D encoding result=40 06:35:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:45 Set channel filter=0.000000e+000 result=40 06:35:45 Config A/D Result=40 06:35:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:45 Get A/D filter: -9.255963e+061 result=40 06:35:45 Get A/D value=-858993460 result=40 06:35:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:45 Parameters OK 06:35:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:45 Set A/D data flow result=40 06:35:45 Set A/D channel type result=40 06:35:45 Set A/D encoding result=40 06:35:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:45 Set channel filter=0.000000e+000 result=40 06:35:45 Config A/D Result=40 06:35:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:45 Get A/D filter: -9.255963e+061 result=40 06:35:45 Get A/D value=-858993460 result=40 06:35:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:35:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:35:45 Aux= 06:35:45 Message to Camera, serial 97173 queued 06:36:22 Received message from Master: op=PointingHead serial=97186 06:36:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:36:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:36:22 Point started: ret=0 06:36:22 point_skyscan result=0 06:36:23 Check angles 06:36:23 SkyScan query 06:36:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:36:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:36:24 Message to Master queued w/err=0: serial=97186 error=0 06:36:29 Received message from Master: op=Filter serial=97187 06:36:29 Color wheel filter change from 0 to 0 06:36:29 FLIGetFilterPos err=0 currentPosition=0 06:36:29 FLIGetStepsRemaining err=0 RemainingSteps=0 06:36:29 Filter is already there-color wheel unchanged 06:36:29 Received message from Master: op=Shutter serial=97188 06:36:29 Shutter LASER close 06:36:29 Received message from Camera: op=State serial=97190 06:36:29 GetSingleValue result=40 Value=cccccccc 06:36:29 SkyScan query 06:36:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:36:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:29 Parameters OK 06:36:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:29 Set A/D data flow result=40 06:36:29 Set A/D channel type result=40 06:36:29 Set A/D encoding result=40 06:36:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:29 Set channel filter=0.000000e+000 result=40 06:36:29 Config A/D Result=40 06:36:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:29 Get A/D filter: -9.255963e+061 result=40 06:36:29 Get A/D value=-858993460 result=40 06:36:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:29 Parameters OK 06:36:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:29 Set A/D data flow result=40 06:36:29 Set A/D channel type result=40 06:36:29 Set A/D encoding result=40 06:36:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:29 Set channel filter=0.000000e+000 result=40 06:36:29 Config A/D Result=40 06:36:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:29 Get A/D filter: -9.255963e+061 result=40 06:36:29 Get A/D value=-858993460 result=40 06:36:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:36:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:36:29 Aux= 06:36:29 Message to Camera, serial 97190 queued 06:37:06 Received message from Master: op=PointingHead serial=97203 06:37:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:37:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:37:07 Point started: ret=0 06:37:07 point_skyscan result=0 06:37:07 Check angles 06:37:07 SkyScan query 06:37:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 06:37:08 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 06:37:08 Check angles 06:37:08 SkyScan query 06:37:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.52<-14968 Statuses=0008 0009 06:37:09 Msec=750 True Az=112.995 Ze=-44.52 Az status=0008 Ze status=0009 06:37:09 Check angles 06:37:09 SkyScan query 06:37:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.46<-16364 Statuses=0008 0009 06:37:09 Msec=1500 True Az=112.995 Ze=-65.46 Az status=0008 Ze status=0009 06:37:10 Check angles 06:37:10 SkyScan query 06:37:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.865<-17791 Statuses=0008 0009 06:37:10 Msec=2250 True Az=112.995 Ze=-86.865 Az status=0008 Ze status=0009 06:37:10 Check angles 06:37:10 SkyScan query 06:37:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 06:37:11 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 06:37:11 Check angles 06:37:11 SkyScan query 06:37:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.715<-20581 Statuses=0008 0009 06:37:12 Msec=3750 True Az=112.995 Ze=-128.715 Az status=0008 Ze status=0009 06:37:12 Check angles 06:37:12 SkyScan query 06:37:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.15<-22010 Statuses=0008 0009 06:37:12 Msec=4500 True Az=112.995 Ze=-150.15 Az status=0008 Ze status=0009 06:37:13 Check angles 06:37:13 SkyScan query 06:37:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.97<-23398 Statuses=0008 0009 06:37:13 Msec=5250 True Az=112.995 Ze=-170.97 Az status=0008 Ze status=0009 06:37:13 Check angles 06:37:13 SkyScan query 06:37:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:37:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:37:14 Message to Master queued w/err=0: serial=97203 error=0 06:37:19 Received message from Master: op=Filter serial=97204 06:37:19 Color wheel filter change from 0 to 0 06:37:19 FLIGetFilterPos err=0 currentPosition=0 06:37:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:37:19 Filter is already there-color wheel unchanged 06:37:19 Received message from Master: op=Shutter serial=97205 06:37:19 Shutter LASER open 06:37:19 Received message from Camera: op=State serial=97207 06:37:19 GetSingleValue result=40 Value=cccccccc 06:37:19 SkyScan query 06:37:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:37:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:20 Parameters OK 06:37:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:20 Set A/D data flow result=40 06:37:20 Set A/D channel type result=40 06:37:20 Set A/D encoding result=40 06:37:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:20 Set channel filter=0.000000e+000 result=40 06:37:20 Config A/D Result=40 06:37:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:20 Get A/D filter: -9.255963e+061 result=40 06:37:20 Get A/D value=-858993460 result=40 06:37:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:20 Parameters OK 06:37:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:20 Set A/D data flow result=40 06:37:20 Set A/D channel type result=40 06:37:20 Set A/D encoding result=40 06:37:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:20 Set channel filter=0.000000e+000 result=40 06:37:20 Config A/D Result=40 06:37:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:20 Get A/D filter: -9.255963e+061 result=40 06:37:20 Get A/D value=-858993460 result=40 06:37:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:37:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:37:20 Aux= 06:37:20 Message to Camera, serial 97207 queued 06:37:28 Received message from Master: op=Shutter serial=97217 06:37:28 Shutter LASER close 06:37:29 Received message from Master: op=PointingHead serial=97221 06:37:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:37:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:37:29 Point started: ret=0 06:37:29 point_skyscan result=0 06:37:30 Check angles 06:37:30 SkyScan query 06:37:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.52<-21568 Statuses=0008 0009 06:37:31 Msec=0 True Az=112.995 Ze=-143.52 Az status=0008 Ze status=0009 06:37:31 Check angles 06:37:31 SkyScan query 06:37:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.58<-20172 Statuses=0008 0009 06:37:31 Msec=750 True Az=112.995 Ze=-122.58 Az status=0008 Ze status=0009 06:37:32 Check angles 06:37:32 SkyScan query 06:37:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 06:37:32 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 06:37:32 Check angles 06:37:32 SkyScan query 06:37:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.175<-17345 Statuses=0008 0009 06:37:33 Msec=2250 True Az=112.995 Ze=-80.175 Az status=0008 Ze status=0009 06:37:33 Check angles 06:37:33 SkyScan query 06:37:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.235<-15949 Statuses=0008 0009 06:37:34 Msec=3000 True Az=112.995 Ze=-59.235 Az status=0008 Ze status=0009 06:37:34 Check angles 06:37:34 SkyScan query 06:37:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.815<-14521 Statuses=0008 0009 06:37:34 Msec=3750 True Az=112.995 Ze=-37.815 Az status=0008 Ze status=0009 06:37:35 Check angles 06:37:35 SkyScan query 06:37:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.875<-13125 Statuses=0008 0009 06:37:35 Msec=4500 True Az=112.995 Ze=-16.875 Az status=0008 Ze status=0009 06:37:35 Check angles 06:37:35 SkyScan query 06:37:36 SkyScan query done: ret=0 az=112.995<-7533 ze=4.08<-11728 Statuses=0008 0009 06:37:36 Msec=5250 True Az=112.995 Ze=4.08 Az status=0008 Ze status=0009 06:37:36 Check angles 06:37:36 SkyScan query 06:37:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:37:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:37:37 Message to Master queued w/err=0: serial=97221 error=0 06:37:42 Received message from Master: op=Filter serial=97222 06:37:42 Color wheel filter change from 0 to 0 06:37:42 FLIGetFilterPos err=0 currentPosition=0 06:37:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:37:42 Filter is already there-color wheel unchanged 06:37:42 Received message from Master: op=Shutter serial=97223 06:37:42 Shutter LASER close 06:37:42 Received message from Camera: op=State serial=97225 06:37:42 GetSingleValue result=40 Value=cccccccc 06:37:42 SkyScan query 06:37:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:37:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:43 Parameters OK 06:37:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:43 Set A/D data flow result=40 06:37:43 Set A/D channel type result=40 06:37:43 Set A/D encoding result=40 06:37:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:43 Set channel filter=0.000000e+000 result=40 06:37:43 Config A/D Result=40 06:37:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:43 Get A/D filter: -9.255963e+061 result=40 06:37:43 Get A/D value=-858993460 result=40 06:37:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:43 Parameters OK 06:37:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:43 Set A/D data flow result=40 06:37:43 Set A/D channel type result=40 06:37:43 Set A/D encoding result=40 06:37:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:43 Set channel filter=0.000000e+000 result=40 06:37:43 Config A/D Result=40 06:37:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:43 Get A/D filter: -9.255963e+061 result=40 06:37:43 Get A/D value=-858993460 result=40 06:37:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:37:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:37:43 Aux= 06:37:43 Message to Camera, serial 97225 queued 06:38:19 Received message from Master: op=PointingHead serial=97238 06:38:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:38:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:38:20 Point started: ret=0 06:38:20 point_skyscan result=0 06:38:21 Check angles 06:38:21 SkyScan query 06:38:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:38:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:38:21 Message to Master queued w/err=0: serial=97238 error=0 06:38:26 Received message from Master: op=Filter serial=97239 06:38:26 Color wheel filter change from 0 to 0 06:38:26 FLIGetFilterPos err=0 currentPosition=0 06:38:26 FLIGetStepsRemaining err=0 RemainingSteps=0 06:38:26 Filter is already there-color wheel unchanged 06:38:26 Received message from Master: op=Shutter serial=97240 06:38:26 Shutter LASER close 06:38:26 Received message from Camera: op=State serial=97242 06:38:26 GetSingleValue result=40 Value=cccccccc 06:38:26 SkyScan query 06:38:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:38:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:27 Parameters OK 06:38:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:27 Set A/D data flow result=40 06:38:27 Set A/D channel type result=40 06:38:27 Set A/D encoding result=40 06:38:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:27 Set channel filter=0.000000e+000 result=40 06:38:27 Config A/D Result=40 06:38:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:27 Get A/D filter: -9.255963e+061 result=40 06:38:27 Get A/D value=-858993460 result=40 06:38:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:27 Parameters OK 06:38:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:27 Set A/D data flow result=40 06:38:27 Set A/D channel type result=40 06:38:27 Set A/D encoding result=40 06:38:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:27 Set channel filter=0.000000e+000 result=40 06:38:27 Config A/D Result=40 06:38:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:27 Get A/D filter: -9.255963e+061 result=40 06:38:27 Get A/D value=-858993460 result=40 06:38:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:38:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:38:27 Aux= 06:38:27 Message to Camera, serial 97242 queued 06:39:04 Received message from Master: op=PointingHead serial=97255 06:39:04 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:39:04 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:39:04 Point started: ret=0 06:39:04 point_skyscan result=0 06:39:05 Check angles 06:39:05 SkyScan query 06:39:05 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 06:39:05 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 06:39:06 Check angles 06:39:06 SkyScan query 06:39:06 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.495<-12433 Statuses=0009 0008 06:39:06 Msec=750 True Az=153.93 Ze=-6.495 Az status=0009 Ze status=0008 06:39:06 Check angles 06:39:06 SkyScan query 06:39:07 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 06:39:07 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 06:39:07 Check angles 06:39:07 SkyScan query 06:39:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:39:08 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:39:08 Message to Master queued w/err=0: serial=97255 error=0 06:39:13 Received message from Master: op=Filter serial=97256 06:39:13 Color wheel filter change from 0 to 0 06:39:13 FLIGetFilterPos err=0 currentPosition=0 06:39:13 FLIGetStepsRemaining err=0 RemainingSteps=0 06:39:13 Filter is already there-color wheel unchanged 06:39:13 Received message from Master: op=Shutter serial=97257 06:39:13 Shutter LASER close 06:39:13 Received message from Camera: op=State serial=97259 06:39:13 GetSingleValue result=40 Value=cccccccc 06:39:13 SkyScan query 06:39:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:39:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:13 Parameters OK 06:39:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:13 Set A/D data flow result=40 06:39:13 Set A/D channel type result=40 06:39:13 Set A/D encoding result=40 06:39:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:13 Set channel filter=0.000000e+000 result=40 06:39:13 Config A/D Result=40 06:39:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:13 Get A/D filter: -9.255963e+061 result=40 06:39:13 Get A/D value=-858993460 result=40 06:39:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:13 Parameters OK 06:39:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:13 Set A/D data flow result=40 06:39:13 Set A/D channel type result=40 06:39:13 Set A/D encoding result=40 06:39:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:13 Set channel filter=0.000000e+000 result=40 06:39:13 Config A/D Result=40 06:39:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:13 Get A/D filter: -9.255963e+061 result=40 06:39:13 Get A/D value=-858993460 result=40 06:39:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:39:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:39:13 Aux= 06:39:13 Message to Camera, serial 97259 queued 06:39:50 Received message from Master: op=PointingHead serial=97272 06:39:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:39:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:39:51 Point started: ret=0 06:39:51 point_skyscan result=0 06:39:51 Check angles 06:39:51 SkyScan query 06:39:52 SkyScan query done: ret=0 az=153.3<-10220 ze=6.51<-11566 Statuses=0009 0008 06:39:52 Msec=0 True Az=153.3 Ze=6.51 Az status=0009 Ze status=0008 06:39:52 Check angles 06:39:52 SkyScan query 06:39:53 SkyScan query done: ret=0 az=135.81<-9054 ze=6.495<-11567 Statuses=0009 0008 06:39:53 Msec=750 True Az=135.81 Ze=6.495 Az status=0009 Ze status=0008 06:39:53 Check angles 06:39:53 SkyScan query 06:39:53 SkyScan query done: ret=0 az=118.2<-7880 ze=6.495<-11567 Statuses=0009 0008 06:39:53 Msec=1500 True Az=118.2 Ze=6.495 Az status=0009 Ze status=0008 06:39:54 Check angles 06:39:54 SkyScan query 06:39:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:39:54 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:39:54 Message to Master queued w/err=0: serial=97272 error=0 06:39:59 Received message from Master: op=Filter serial=97273 06:39:59 Color wheel filter change from 0 to 0 06:39:59 FLIGetFilterPos err=0 currentPosition=0 06:39:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:39:59 Filter is already there-color wheel unchanged 06:39:59 Received message from Master: op=Shutter serial=97274 06:39:59 Shutter LASER close 06:39:59 Received message from Camera: op=State serial=97276 06:39:59 GetSingleValue result=40 Value=cccccccc 06:39:59 SkyScan query 06:40:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:40:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:00 Parameters OK 06:40:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:00 Set A/D data flow result=40 06:40:00 Set A/D channel type result=40 06:40:00 Set A/D encoding result=40 06:40:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:00 Set channel filter=0.000000e+000 result=40 06:40:00 Config A/D Result=40 06:40:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:00 Get A/D filter: -9.255963e+061 result=40 06:40:00 Get A/D value=-858993460 result=40 06:40:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:00 Parameters OK 06:40:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:00 Set A/D data flow result=40 06:40:00 Set A/D channel type result=40 06:40:00 Set A/D encoding result=40 06:40:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:00 Set channel filter=0.000000e+000 result=40 06:40:00 Config A/D Result=40 06:40:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:00 Get A/D filter: -9.255963e+061 result=40 06:40:00 Get A/D value=-858993460 result=40 06:40:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:40:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:40:00 Aux= 06:40:00 Message to Camera, serial 97276 queued 06:40:37 Received message from Master: op=PointingHead serial=97289 06:40:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:40:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:40:37 Point started: ret=0 06:40:37 point_skyscan result=0 06:40:38 Check angles 06:40:38 SkyScan query 06:40:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.04<-13536 Statuses=0008 0009 06:40:39 Msec=0 True Az=112.995 Ze=-23.04 Az status=0008 Ze status=0009 06:40:39 Check angles 06:40:39 SkyScan query 06:40:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.07<-14938 Statuses=0008 0009 06:40:39 Msec=750 True Az=112.995 Ze=-44.07 Az status=0008 Ze status=0009 06:40:39 Check angles 06:40:39 SkyScan query 06:40:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.965<-16331 Statuses=0008 0009 06:40:40 Msec=1500 True Az=112.995 Ze=-64.965 Az status=0008 Ze status=0009 06:40:40 Check angles 06:40:40 SkyScan query 06:40:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.965<-17731 Statuses=0008 0009 06:40:41 Msec=2250 True Az=112.995 Ze=-85.965 Az status=0008 Ze status=0009 06:40:41 Check angles 06:40:41 SkyScan query 06:40:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.875<-19125 Statuses=0008 0009 06:40:42 Msec=3000 True Az=112.995 Ze=-106.875 Az status=0008 Ze status=0009 06:40:42 Check angles 06:40:42 SkyScan query 06:40:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.845<-20523 Statuses=0008 0009 06:40:42 Msec=3750 True Az=112.995 Ze=-127.845 Az status=0008 Ze status=0009 06:40:42 Check angles 06:40:42 SkyScan query 06:40:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.77<-21918 Statuses=0008 0009 06:40:43 Msec=4500 True Az=112.995 Ze=-148.77 Az status=0008 Ze status=0009 06:40:43 Check angles 06:40:43 SkyScan query 06:40:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.725<-23315 Statuses=0008 0009 06:40:44 Msec=5250 True Az=112.995 Ze=-169.725 Az status=0008 Ze status=0009 06:40:44 Check angles 06:40:44 SkyScan query 06:40:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:40:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:40:45 Message to Master queued w/err=0: serial=97289 error=0 06:40:50 Received message from Master: op=Filter serial=97290 06:40:50 Color wheel filter change from 0 to 0 06:40:50 FLIGetFilterPos err=0 currentPosition=0 06:40:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:40:50 Filter is already there-color wheel unchanged 06:40:50 Received message from Master: op=Shutter serial=97291 06:40:50 Shutter LASER open 06:40:50 Received message from Camera: op=State serial=97293 06:40:50 GetSingleValue result=40 Value=cccccccc 06:40:50 SkyScan query 06:40:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:40:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:50 Parameters OK 06:40:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:50 Set A/D data flow result=40 06:40:50 Set A/D channel type result=40 06:40:50 Set A/D encoding result=40 06:40:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:50 Set channel filter=0.000000e+000 result=40 06:40:50 Config A/D Result=40 06:40:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:50 Get A/D filter: -9.255963e+061 result=40 06:40:50 Get A/D value=-858993460 result=40 06:40:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:50 Parameters OK 06:40:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:50 Set A/D data flow result=40 06:40:50 Set A/D channel type result=40 06:40:50 Set A/D encoding result=40 06:40:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:50 Set channel filter=0.000000e+000 result=40 06:40:50 Config A/D Result=40 06:40:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:50 Get A/D filter: -9.255963e+061 result=40 06:40:50 Get A/D value=-858993460 result=40 06:40:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:40:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:40:50 Aux= 06:40:50 Message to Camera, serial 97293 queued 06:40:59 Received message from Master: op=Shutter serial=97303 06:40:59 Shutter LASER close 06:40:59 Received message from Master: op=PointingHead serial=97307 06:40:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:40:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:41:00 Point started: ret=0 06:41:00 point_skyscan result=0 06:41:00 Check angles 06:41:00 SkyScan query 06:41:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 06:41:01 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 06:41:01 Check angles 06:41:01 SkyScan query 06:41:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.425<-20095 Statuses=0008 0009 06:41:02 Msec=750 True Az=112.995 Ze=-121.425 Az status=0008 Ze status=0009 06:41:02 Check angles 06:41:02 SkyScan query 06:41:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.53<-18702 Statuses=0008 0009 06:41:03 Msec=1500 True Az=112.995 Ze=-100.53 Az status=0008 Ze status=0009 06:41:03 Check angles 06:41:03 SkyScan query 06:41:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.515<-17301 Statuses=0008 0009 06:41:03 Msec=2250 True Az=112.995 Ze=-79.515 Az status=0008 Ze status=0009 06:41:03 Check angles 06:41:03 SkyScan query 06:41:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.59<-15906 Statuses=0008 0009 06:41:04 Msec=3000 True Az=112.995 Ze=-58.59 Az status=0008 Ze status=0009 06:41:04 Check angles 06:41:04 SkyScan query 06:41:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.635<-14509 Statuses=0008 0009 06:41:05 Msec=3750 True Az=112.995 Ze=-37.635 Az status=0008 Ze status=0009 06:41:05 Check angles 06:41:05 SkyScan query 06:41:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.68<-13112 Statuses=0008 0009 06:41:06 Msec=4500 True Az=112.995 Ze=-16.68 Az status=0008 Ze status=0009 06:41:06 Check angles 06:41:06 SkyScan query 06:41:06 SkyScan query done: ret=0 az=113.01<-7534 ze=4.26<-11716 Statuses=0008 0009 06:41:06 Msec=5250 True Az=113.01 Ze=4.26 Az status=0008 Ze status=0009 06:41:06 Check angles 06:41:06 SkyScan query 06:41:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:41:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:41:07 Message to Master queued w/err=0: serial=97307 error=0 06:41:12 Received message from Master: op=Filter serial=97308 06:41:12 Color wheel filter change from 0 to 0 06:41:12 FLIGetFilterPos err=0 currentPosition=0 06:41:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:12 Filter is already there-color wheel unchanged 06:41:12 Received message from Master: op=Shutter serial=97309 06:41:12 Shutter LASER close 06:41:12 Received message from Camera: op=State serial=97311 06:41:12 GetSingleValue result=40 Value=cccccccc 06:41:12 SkyScan query 06:41:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:41:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:13 Parameters OK 06:41:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:13 Set A/D data flow result=40 06:41:13 Set A/D channel type result=40 06:41:13 Set A/D encoding result=40 06:41:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:13 Set channel filter=0.000000e+000 result=40 06:41:13 Config A/D Result=40 06:41:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:13 Get A/D filter: -9.255963e+061 result=40 06:41:13 Get A/D value=-858993460 result=40 06:41:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:13 Parameters OK 06:41:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:13 Set A/D data flow result=40 06:41:13 Set A/D channel type result=40 06:41:13 Set A/D encoding result=40 06:41:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:13 Set channel filter=0.000000e+000 result=40 06:41:13 Config A/D Result=40 06:41:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:13 Get A/D filter: -9.255963e+061 result=40 06:41:13 Get A/D value=-858993460 result=40 06:41:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:13 Aux= 06:41:13 Message to Camera, serial 97311 queued 06:41:50 Received message from Master: op=PointingHead serial=97324 06:41:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:41:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:41:50 Point started: ret=0 06:41:50 point_skyscan result=0 06:41:51 Check angles 06:41:51 SkyScan query 06:41:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:41:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:41:51 Message to Master queued w/err=0: serial=97324 error=0 06:41:56 Received message from Master: op=Filter serial=97325 06:41:56 Color wheel filter change from 0 to 0 06:41:56 FLIGetFilterPos err=0 currentPosition=0 06:41:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:56 Filter is already there-color wheel unchanged 06:41:57 Received message from Master: op=Shutter serial=97326 06:41:57 Shutter LASER close 06:41:57 Received message from Camera: op=State serial=97328 06:41:57 GetSingleValue result=40 Value=cccccccc 06:41:57 SkyScan query 06:41:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:41:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:57 Parameters OK 06:41:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:57 Set A/D data flow result=40 06:41:57 Set A/D channel type result=40 06:41:57 Set A/D encoding result=40 06:41:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:57 Set channel filter=0.000000e+000 result=40 06:41:57 Config A/D Result=40 06:41:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:57 Get A/D filter: -9.255963e+061 result=40 06:41:57 Get A/D value=-858993460 result=40 06:41:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:57 Parameters OK 06:41:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:57 Set A/D data flow result=40 06:41:57 Set A/D channel type result=40 06:41:57 Set A/D encoding result=40 06:41:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:57 Set channel filter=0.000000e+000 result=40 06:41:57 Config A/D Result=40 06:41:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:57 Get A/D filter: -9.255963e+061 result=40 06:41:57 Get A/D value=-858993460 result=40 06:41:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:57 Aux= 06:41:57 Message to Camera, serial 97328 queued 06:42:34 Received message from Master: op=PointingHead serial=97341 06:42:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:42:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:42:34 Point started: ret=0 06:42:34 point_skyscan result=0 06:42:35 Check angles 06:42:35 SkyScan query 06:42:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:42:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:42:36 Message to Master queued w/err=0: serial=97341 error=0 06:42:41 Received message from Master: op=Filter serial=97342 06:42:41 Color wheel filter change from 0 to 0 06:42:41 FLIGetFilterPos err=0 currentPosition=0 06:42:41 FLIGetStepsRemaining err=0 RemainingSteps=0 06:42:41 Filter is already there-color wheel unchanged 06:42:41 Received message from Master: op=Shutter serial=97343 06:42:41 Shutter LASER close 06:42:41 Received message from Camera: op=State serial=97345 06:42:41 GetSingleValue result=40 Value=cccccccc 06:42:41 SkyScan query 06:42:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:42:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:41 Parameters OK 06:42:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:41 Set A/D data flow result=40 06:42:41 Set A/D channel type result=40 06:42:41 Set A/D encoding result=40 06:42:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:41 Set channel filter=0.000000e+000 result=40 06:42:41 Config A/D Result=40 06:42:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:41 Get A/D filter: -9.255963e+061 result=40 06:42:41 Get A/D value=-858993460 result=40 06:42:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:41 Parameters OK 06:42:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:41 Set A/D data flow result=40 06:42:41 Set A/D channel type result=40 06:42:41 Set A/D encoding result=40 06:42:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:41 Set channel filter=0.000000e+000 result=40 06:42:41 Config A/D Result=40 06:42:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:41 Get A/D filter: -9.255963e+061 result=40 06:42:41 Get A/D value=-858993460 result=40 06:42:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:42:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:42:41 Aux= 06:42:41 Message to Camera, serial 97345 queued 06:43:18 Received message from Master: op=PointingHead serial=97358 06:43:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:43:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:43:19 Point started: ret=0 06:43:19 point_skyscan result=0 06:43:20 Check angles 06:43:20 SkyScan query 06:43:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:43:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:43:20 Message to Master queued w/err=0: serial=97358 error=0 06:43:25 Received message from Master: op=Filter serial=97359 06:43:25 Color wheel filter change from 0 to 0 06:43:25 FLIGetFilterPos err=0 currentPosition=0 06:43:25 FLIGetStepsRemaining err=0 RemainingSteps=0 06:43:25 Filter is already there-color wheel unchanged 06:43:25 Received message from Master: op=Shutter serial=97360 06:43:25 Shutter LASER close 06:43:25 Received message from Camera: op=State serial=97362 06:43:25 GetSingleValue result=40 Value=cccccccc 06:43:25 SkyScan query 06:43:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:43:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:26 Parameters OK 06:43:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:26 Set A/D data flow result=40 06:43:26 Set A/D channel type result=40 06:43:26 Set A/D encoding result=40 06:43:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:26 Set channel filter=0.000000e+000 result=40 06:43:26 Config A/D Result=40 06:43:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:26 Get A/D filter: -9.255963e+061 result=40 06:43:26 Get A/D value=-858993460 result=40 06:43:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:26 Parameters OK 06:43:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:26 Set A/D data flow result=40 06:43:26 Set A/D channel type result=40 06:43:26 Set A/D encoding result=40 06:43:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:26 Set channel filter=0.000000e+000 result=40 06:43:26 Config A/D Result=40 06:43:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:26 Get A/D filter: -9.255963e+061 result=40 06:43:26 Get A/D value=-858993460 result=40 06:43:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:43:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:43:26 Aux= 06:43:26 Message to Camera, serial 97362 queued [UTC 2019-3-4 06:43:50] 06:44:03 Received message from Master: op=PointingHead serial=97375 06:44:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:44:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:44:03 Point started: ret=0 06:44:03 point_skyscan result=0 06:44:04 Check angles 06:44:04 SkyScan query 06:44:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.995<-13533 Statuses=0008 0009 06:44:04 Msec=0 True Az=112.995 Ze=-22.995 Az status=0008 Ze status=0009 06:44:05 Check angles 06:44:05 SkyScan query 06:44:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 06:44:05 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 06:44:05 Check angles 06:44:05 SkyScan query 06:44:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.79<-16386 Statuses=0008 0009 06:44:06 Msec=1500 True Az=112.995 Ze=-65.79 Az status=0008 Ze status=0009 06:44:06 Check angles 06:44:06 SkyScan query 06:44:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.715<-17781 Statuses=0008 0009 06:44:07 Msec=2250 True Az=112.995 Ze=-86.715 Az status=0008 Ze status=0009 06:44:07 Check angles 06:44:07 SkyScan query 06:44:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.67<-19178 Statuses=0008 0009 06:44:07 Msec=3000 True Az=112.995 Ze=-107.67 Az status=0008 Ze status=0009 06:44:08 Check angles 06:44:08 SkyScan query 06:44:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.625<-20575 Statuses=0008 0009 06:44:08 Msec=3750 True Az=112.995 Ze=-128.625 Az status=0008 Ze status=0009 06:44:08 Check angles 06:44:08 SkyScan query 06:44:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.595<-21973 Statuses=0008 0009 06:44:09 Msec=4500 True Az=112.995 Ze=-149.595 Az status=0008 Ze status=0009 06:44:09 Check angles 06:44:09 SkyScan query 06:44:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.52<-23368 Statuses=0008 0009 06:44:10 Msec=5250 True Az=112.995 Ze=-170.52 Az status=0008 Ze status=0009 06:44:10 Check angles 06:44:10 SkyScan query 06:44:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:44:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:44:10 Message to Master queued w/err=0: serial=97375 error=0 06:44:15 Received message from Master: op=Filter serial=97376 06:44:15 Color wheel filter change from 0 to 0 06:44:15 FLIGetFilterPos err=0 currentPosition=0 06:44:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:15 Filter is already there-color wheel unchanged 06:44:16 Received message from Master: op=Shutter serial=97377 06:44:16 Shutter LASER open 06:44:16 Received message from Camera: op=State serial=97379 06:44:16 GetSingleValue result=40 Value=cccccccc 06:44:16 SkyScan query 06:44:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:44:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:16 Parameters OK 06:44:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:16 Set A/D data flow result=40 06:44:16 Set A/D channel type result=40 06:44:16 Set A/D encoding result=40 06:44:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:16 Set channel filter=0.000000e+000 result=40 06:44:16 Config A/D Result=40 06:44:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:16 Get A/D filter: -9.255963e+061 result=40 06:44:16 Get A/D value=-858993460 result=40 06:44:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:16 Parameters OK 06:44:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:16 Set A/D data flow result=40 06:44:16 Set A/D channel type result=40 06:44:16 Set A/D encoding result=40 06:44:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:16 Set channel filter=0.000000e+000 result=40 06:44:16 Config A/D Result=40 06:44:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:16 Get A/D filter: -9.255963e+061 result=40 06:44:16 Get A/D value=-858993460 result=40 06:44:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:16 Aux= 06:44:16 Message to Camera, serial 97379 queued 06:44:25 Received message from Master: op=Shutter serial=97389 06:44:25 Shutter LASER close 06:44:25 Received message from Master: op=PointingHead serial=97393 06:44:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:44:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:44:26 Point started: ret=0 06:44:26 point_skyscan result=0 06:44:26 Check angles 06:44:26 SkyScan query 06:44:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.77<-21518 Statuses=0008 0009 06:44:27 Msec=0 True Az=112.995 Ze=-142.77 Az status=0008 Ze status=0009 06:44:27 Check angles 06:44:27 SkyScan query 06:44:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.365<-20091 Statuses=0008 0009 06:44:28 Msec=750 True Az=112.995 Ze=-121.365 Az status=0008 Ze status=0009 06:44:28 Check angles 06:44:28 SkyScan query 06:44:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.44<-18696 Statuses=0008 0009 06:44:29 Msec=1500 True Az=112.995 Ze=-100.44 Az status=0008 Ze status=0009 06:44:29 Check angles 06:44:29 SkyScan query 06:44:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.47<-17298 Statuses=0008 0009 06:44:29 Msec=2250 True Az=112.995 Ze=-79.47 Az status=0008 Ze status=0009 06:44:29 Check angles 06:44:29 SkyScan query 06:44:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.515<-15901 Statuses=0008 0009 06:44:30 Msec=3000 True Az=112.995 Ze=-58.515 Az status=0008 Ze status=0009 06:44:30 Check angles 06:44:30 SkyScan query 06:44:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.575<-14505 Statuses=0008 0009 06:44:31 Msec=3750 True Az=112.995 Ze=-37.575 Az status=0008 Ze status=0009 06:44:31 Check angles 06:44:31 SkyScan query 06:44:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.62<-13108 Statuses=0008 0009 06:44:32 Msec=4500 True Az=112.995 Ze=-16.62 Az status=0008 Ze status=0009 06:44:32 Check angles 06:44:32 SkyScan query 06:44:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.29<-11714 Statuses=0008 0009 06:44:32 Msec=5250 True Az=112.995 Ze=4.29 Az status=0008 Ze status=0009 06:44:32 Check angles 06:44:32 SkyScan query 06:44:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:44:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:44:33 Message to Master queued w/err=0: serial=97393 error=0 06:44:38 Received message from Master: op=Filter serial=97394 06:44:38 Color wheel filter change from 0 to 0 06:44:38 FLIGetFilterPos err=0 currentPosition=0 06:44:38 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:38 Filter is already there-color wheel unchanged 06:44:38 Received message from Master: op=Shutter serial=97395 06:44:38 Shutter LASER close 06:44:38 Received message from Camera: op=State serial=97397 06:44:38 GetSingleValue result=40 Value=cccccccc 06:44:38 SkyScan query 06:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:44:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:39 Parameters OK 06:44:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:39 Set A/D data flow result=40 06:44:39 Set A/D channel type result=40 06:44:39 Set A/D encoding result=40 06:44:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:39 Set channel filter=0.000000e+000 result=40 06:44:39 Config A/D Result=40 06:44:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:39 Get A/D filter: -9.255963e+061 result=40 06:44:39 Get A/D value=-858993460 result=40 06:44:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:39 Parameters OK 06:44:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:39 Set A/D data flow result=40 06:44:39 Set A/D channel type result=40 06:44:39 Set A/D encoding result=40 06:44:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:39 Set channel filter=0.000000e+000 result=40 06:44:39 Config A/D Result=40 06:44:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:39 Get A/D filter: -9.255963e+061 result=40 06:44:39 Get A/D value=-858993460 result=40 06:44:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:39 Aux= 06:44:39 Message to Camera, serial 97397 queued 06:45:16 Received message from Master: op=PointingHead serial=97410 06:45:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:45:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:45:16 Point started: ret=0 06:45:16 point_skyscan result=0 06:45:17 Check angles 06:45:17 SkyScan query 06:45:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:45:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:45:17 Message to Master queued w/err=0: serial=97410 error=0 06:45:22 Received message from Master: op=Filter serial=97411 06:45:22 Color wheel filter change from 0 to 0 06:45:22 FLIGetFilterPos err=0 currentPosition=0 06:45:22 FLIGetStepsRemaining err=0 RemainingSteps=0 06:45:22 Filter is already there-color wheel unchanged 06:45:23 Received message from Master: op=Shutter serial=97412 06:45:23 Shutter LASER close 06:45:23 Received message from Camera: op=State serial=97414 06:45:23 GetSingleValue result=40 Value=cccccccc 06:45:23 SkyScan query 06:45:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:45:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:23 Parameters OK 06:45:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:23 Set A/D data flow result=40 06:45:23 Set A/D channel type result=40 06:45:23 Set A/D encoding result=40 06:45:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:23 Set channel filter=0.000000e+000 result=40 06:45:23 Config A/D Result=40 06:45:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:23 Get A/D filter: -9.255963e+061 result=40 06:45:23 Get A/D value=-858993460 result=40 06:45:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:23 Parameters OK 06:45:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:23 Set A/D data flow result=40 06:45:23 Set A/D channel type result=40 06:45:23 Set A/D encoding result=40 06:45:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:23 Set channel filter=0.000000e+000 result=40 06:45:23 Config A/D Result=40 06:45:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:23 Get A/D filter: -9.255963e+061 result=40 06:45:23 Get A/D value=-858993460 result=40 06:45:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:45:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:45:23 Aux= 06:45:23 Message to Camera, serial 97414 queued 06:45:59 Received message from Master: op=PointingHead serial=97426 06:45:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:45:59 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:46:00 Point started: ret=0 06:46:00 point_skyscan result=0 06:46:00 Check angles 06:46:00 SkyScan query 06:46:01 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 06:46:01 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 06:46:01 Check angles 06:46:01 SkyScan query 06:46:02 SkyScan query done: ret=0 az=153.75<-10250 ze=-6.495<-12433 Statuses=0009 0008 06:46:02 Msec=750 True Az=153.75 Ze=-6.495 Az status=0009 Ze status=0008 06:46:02 Check angles 06:46:02 SkyScan query 06:46:02 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 06:46:02 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 06:46:03 Check angles 06:46:03 SkyScan query 06:46:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:46:03 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:46:03 Message to Master queued w/err=0: serial=97426 error=0 06:46:08 Received message from Master: op=Filter serial=97427 06:46:08 Color wheel filter change from 0 to 0 06:46:08 FLIGetFilterPos err=0 currentPosition=0 06:46:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:46:08 Filter is already there-color wheel unchanged 06:46:08 Received message from Master: op=Shutter serial=97428 06:46:08 Shutter LASER close 06:46:08 Received message from Camera: op=State serial=97430 06:46:08 GetSingleValue result=40 Value=cccccccc 06:46:08 SkyScan query 06:46:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:46:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:09 Parameters OK 06:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:09 Set A/D data flow result=40 06:46:09 Set A/D channel type result=40 06:46:09 Set A/D encoding result=40 06:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:09 Set channel filter=0.000000e+000 result=40 06:46:09 Config A/D Result=40 06:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:09 Get A/D filter: -9.255963e+061 result=40 06:46:09 Get A/D value=-858993460 result=40 06:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:09 Parameters OK 06:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:09 Set A/D data flow result=40 06:46:09 Set A/D channel type result=40 06:46:09 Set A/D encoding result=40 06:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:09 Set channel filter=0.000000e+000 result=40 06:46:09 Config A/D Result=40 06:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:09 Get A/D filter: -9.255963e+061 result=40 06:46:09 Get A/D value=-858993460 result=40 06:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:09 Aux= 06:46:09 Message to Camera, serial 97430 queued 06:46:46 Received message from Master: op=PointingHead serial=97443 06:46:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:46:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:46:46 Point started: ret=0 06:46:46 point_skyscan result=0 06:46:47 Check angles 06:46:47 SkyScan query 06:46:47 SkyScan query done: ret=0 az=152.835<-10189 ze=6.51<-11566 Statuses=0009 0008 06:46:47 Msec=0 True Az=152.835 Ze=6.51 Az status=0009 Ze status=0008 06:46:48 Check angles 06:46:48 SkyScan query 06:46:48 SkyScan query done: ret=0 az=135.45<-9030 ze=6.495<-11567 Statuses=0009 0008 06:46:48 Msec=750 True Az=135.45 Ze=6.495 Az status=0009 Ze status=0008 06:46:48 Check angles 06:46:48 SkyScan query 06:46:49 SkyScan query done: ret=0 az=117.975<-7865 ze=6.495<-11567 Statuses=0009 0008 06:46:49 Msec=1500 True Az=117.975 Ze=6.495 Az status=0009 Ze status=0008 06:46:49 Check angles 06:46:49 SkyScan query 06:46:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:46:50 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:46:50 Message to Master queued w/err=0: serial=97443 error=0 06:46:55 Received message from Master: op=Filter serial=97444 06:46:55 Color wheel filter change from 0 to 0 06:46:55 FLIGetFilterPos err=0 currentPosition=0 06:46:55 FLIGetStepsRemaining err=0 RemainingSteps=0 06:46:55 Filter is already there-color wheel unchanged 06:46:55 Received message from Master: op=Shutter serial=97445 06:46:55 Shutter LASER close 06:46:55 Received message from Camera: op=State serial=97447 06:46:55 GetSingleValue result=40 Value=cccccccc 06:46:55 SkyScan query 06:46:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:46:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:55 Parameters OK 06:46:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:55 Set A/D data flow result=40 06:46:55 Set A/D channel type result=40 06:46:55 Set A/D encoding result=40 06:46:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:55 Set channel filter=0.000000e+000 result=40 06:46:55 Config A/D Result=40 06:46:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:55 Get A/D filter: -9.255963e+061 result=40 06:46:55 Get A/D value=-858993460 result=40 06:46:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:55 Parameters OK 06:46:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:55 Set A/D data flow result=40 06:46:55 Set A/D channel type result=40 06:46:55 Set A/D encoding result=40 06:46:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:55 Set channel filter=0.000000e+000 result=40 06:46:55 Config A/D Result=40 06:46:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:55 Get A/D filter: -9.255963e+061 result=40 06:46:55 Get A/D value=-858993460 result=40 06:46:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:55 Aux= 06:46:55 Message to Camera, serial 97447 queued 06:47:32 Received message from Master: op=PointingHead serial=97460 06:47:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:47:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:47:33 Point started: ret=0 06:47:33 point_skyscan result=0 06:47:33 Check angles 06:47:33 SkyScan query 06:47:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.73<-13582 Statuses=0008 0009 06:47:34 Msec=0 True Az=112.995 Ze=-23.73 Az status=0008 Ze status=0009 06:47:34 Check angles 06:47:34 SkyScan query 06:47:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.67<-14978 Statuses=0008 0009 06:47:35 Msec=750 True Az=112.995 Ze=-44.67 Az status=0008 Ze status=0009 06:47:35 Check angles 06:47:35 SkyScan query 06:47:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.625<-16375 Statuses=0008 0009 06:47:35 Msec=1500 True Az=112.995 Ze=-65.625 Az status=0008 Ze status=0009 06:47:36 Check angles 06:47:36 SkyScan query 06:47:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.55<-17770 Statuses=0008 0009 06:47:36 Msec=2250 True Az=112.995 Ze=-86.55 Az status=0008 Ze status=0009 06:47:36 Check angles 06:47:36 SkyScan query 06:47:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.535<-19169 Statuses=0008 0009 06:47:37 Msec=3000 True Az=112.995 Ze=-107.535 Az status=0008 Ze status=0009 06:47:37 Check angles 06:47:37 SkyScan query 06:47:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.445<-20563 Statuses=0008 0009 06:47:38 Msec=3750 True Az=112.995 Ze=-128.445 Az status=0008 Ze status=0009 06:47:38 Check angles 06:47:38 SkyScan query 06:47:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.445<-21963 Statuses=0008 0009 06:47:38 Msec=4500 True Az=112.995 Ze=-149.445 Az status=0008 Ze status=0009 06:47:39 Check angles 06:47:39 SkyScan query 06:47:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.37<-23358 Statuses=0008 0009 06:47:39 Msec=5250 True Az=112.995 Ze=-170.37 Az status=0008 Ze status=0009 06:47:39 Check angles 06:47:39 SkyScan query 06:47:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:47:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:47:40 Message to Master queued w/err=0: serial=97460 error=0 06:47:45 Received message from Master: op=Filter serial=97461 06:47:45 Color wheel filter change from 0 to 0 06:47:45 FLIGetFilterPos err=0 currentPosition=0 06:47:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:47:45 Filter is already there-color wheel unchanged 06:47:45 Received message from Master: op=Shutter serial=97462 06:47:45 Shutter LASER open 06:47:45 Received message from Camera: op=State serial=97464 06:47:45 GetSingleValue result=40 Value=cccccccc 06:47:45 SkyScan query 06:47:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:47:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:46 Parameters OK 06:47:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:46 Set A/D data flow result=40 06:47:46 Set A/D channel type result=40 06:47:46 Set A/D encoding result=40 06:47:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:46 Set channel filter=0.000000e+000 result=40 06:47:46 Config A/D Result=40 06:47:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:46 Get A/D filter: -9.255963e+061 result=40 06:47:46 Get A/D value=-858993460 result=40 06:47:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:46 Parameters OK 06:47:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:46 Set A/D data flow result=40 06:47:46 Set A/D channel type result=40 06:47:46 Set A/D encoding result=40 06:47:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:46 Set channel filter=0.000000e+000 result=40 06:47:46 Config A/D Result=40 06:47:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:46 Get A/D filter: -9.255963e+061 result=40 06:47:46 Get A/D value=-858993460 result=40 06:47:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:47:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:47:46 Aux= 06:47:46 Message to Camera, serial 97464 queued 06:47:53 Received message from Master: op=Shutter serial=97473 06:47:53 Shutter LASER close 06:47:54 Received message from Master: op=PointingHead serial=97477 06:47:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:47:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:47:54 Point started: ret=0 06:47:54 point_skyscan result=0 06:47:55 Check angles 06:47:55 SkyScan query 06:47:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.86<-21524 Statuses=0008 0009 06:47:56 Msec=0 True Az=112.995 Ze=-142.86 Az status=0008 Ze status=0009 06:47:56 Check angles 06:47:56 SkyScan query 06:47:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.875<-20125 Statuses=0008 0009 06:47:56 Msec=750 True Az=112.995 Ze=-121.875 Az status=0008 Ze status=0009 06:47:56 Check angles 06:47:56 SkyScan query 06:47:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 06:47:57 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 06:47:57 Check angles 06:47:57 SkyScan query 06:47:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.995<-17333 Statuses=0008 0009 06:47:58 Msec=2250 True Az=112.995 Ze=-79.995 Az status=0008 Ze status=0009 06:47:58 Check angles 06:47:58 SkyScan query 06:47:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.055<-15937 Statuses=0008 0009 06:47:59 Msec=3000 True Az=112.995 Ze=-59.055 Az status=0008 Ze status=0009 06:47:59 Check angles 06:47:59 SkyScan query 06:47:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.055<-14537 Statuses=0008 0009 06:47:59 Msec=3750 True Az=112.995 Ze=-38.055 Az status=0008 Ze status=0009 06:47:59 Check angles 06:47:59 SkyScan query 06:48:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.13<-13142 Statuses=0008 0009 06:48:00 Msec=4500 True Az=112.995 Ze=-17.13 Az status=0008 Ze status=0009 06:48:00 Check angles 06:48:00 SkyScan query 06:48:01 SkyScan query done: ret=0 az=112.995<-7533 ze=3.84<-11744 Statuses=0008 0009 06:48:01 Msec=5250 True Az=112.995 Ze=3.84 Az status=0008 Ze status=0009 06:48:01 Check angles 06:48:01 SkyScan query 06:48:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:48:02 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:48:02 Message to Master queued w/err=0: serial=97477 error=0 06:48:07 Received message from Master: op=Filter serial=97478 06:48:07 Color wheel filter change from 0 to 0 06:48:07 FLIGetFilterPos err=0 currentPosition=0 06:48:07 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:07 Filter is already there-color wheel unchanged 06:48:07 Received message from Master: op=Shutter serial=97479 06:48:07 Shutter LASER close 06:48:07 Received message from Camera: op=State serial=97481 06:48:07 GetSingleValue result=40 Value=cccccccc 06:48:07 SkyScan query 06:48:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:48:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:07 Parameters OK 06:48:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:07 Set A/D data flow result=40 06:48:07 Set A/D channel type result=40 06:48:07 Set A/D encoding result=40 06:48:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:07 Set channel filter=0.000000e+000 result=40 06:48:07 Config A/D Result=40 06:48:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:07 Get A/D filter: -9.255963e+061 result=40 06:48:07 Get A/D value=-858993460 result=40 06:48:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:07 Parameters OK 06:48:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:07 Set A/D data flow result=40 06:48:07 Set A/D channel type result=40 06:48:07 Set A/D encoding result=40 06:48:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:07 Set channel filter=0.000000e+000 result=40 06:48:07 Config A/D Result=40 06:48:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:07 Get A/D filter: -9.255963e+061 result=40 06:48:07 Get A/D value=-858993460 result=40 06:48:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:07 Aux= 06:48:07 Message to Camera, serial 97481 queued 06:48:44 Received message from Master: op=PointingHead serial=97494 06:48:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:48:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:48:45 Point started: ret=0 06:48:45 point_skyscan result=0 06:48:45 Check angles 06:48:45 SkyScan query 06:48:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:48:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:48:46 Message to Master queued w/err=0: serial=97494 error=0 06:48:51 Received message from Master: op=Filter serial=97495 06:48:51 Color wheel filter change from 0 to 0 06:48:51 FLIGetFilterPos err=0 currentPosition=0 06:48:51 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:51 Filter is already there-color wheel unchanged 06:48:51 Received message from Master: op=Shutter serial=97496 06:48:51 Shutter LASER close 06:48:51 Received message from Camera: op=State serial=97498 06:48:51 GetSingleValue result=40 Value=cccccccc 06:48:51 SkyScan query 06:48:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:48:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:52 Parameters OK 06:48:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:52 Set A/D data flow result=40 06:48:52 Set A/D channel type result=40 06:48:52 Set A/D encoding result=40 06:48:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:52 Set channel filter=0.000000e+000 result=40 06:48:52 Config A/D Result=40 06:48:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:52 Get A/D filter: -9.255963e+061 result=40 06:48:52 Get A/D value=-858993460 result=40 06:48:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:52 Parameters OK 06:48:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:52 Set A/D data flow result=40 06:48:52 Set A/D channel type result=40 06:48:52 Set A/D encoding result=40 06:48:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:52 Set channel filter=0.000000e+000 result=40 06:48:52 Config A/D Result=40 06:48:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:52 Get A/D filter: -9.255963e+061 result=40 06:48:52 Get A/D value=-858993460 result=40 06:48:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:52 Aux= 06:48:52 Message to Camera, serial 97498 queued 06:49:29 Received message from Master: op=PointingHead serial=97511 06:49:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:49:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:49:29 Point started: ret=0 06:49:29 point_skyscan result=0 06:49:30 Check angles 06:49:30 SkyScan query 06:49:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:49:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:49:30 Message to Master queued w/err=0: serial=97511 error=0 06:49:35 Received message from Master: op=Filter serial=97512 06:49:35 Color wheel filter change from 0 to 0 06:49:35 FLIGetFilterPos err=0 currentPosition=0 06:49:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:49:35 Filter is already there-color wheel unchanged 06:49:35 Received message from Master: op=Shutter serial=97513 06:49:35 Shutter LASER close 06:49:36 Received message from Camera: op=State serial=97515 06:49:36 GetSingleValue result=40 Value=cccccccc 06:49:36 SkyScan query 06:49:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:49:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:36 Parameters OK 06:49:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:36 Set A/D data flow result=40 06:49:36 Set A/D channel type result=40 06:49:36 Set A/D encoding result=40 06:49:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:36 Set channel filter=0.000000e+000 result=40 06:49:36 Config A/D Result=40 06:49:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:36 Get A/D filter: -9.255963e+061 result=40 06:49:36 Get A/D value=-858993460 result=40 06:49:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:36 Parameters OK 06:49:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:36 Set A/D data flow result=40 06:49:36 Set A/D channel type result=40 06:49:36 Set A/D encoding result=40 06:49:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:36 Set channel filter=0.000000e+000 result=40 06:49:36 Config A/D Result=40 06:49:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:36 Get A/D filter: -9.255963e+061 result=40 06:49:36 Get A/D value=-858993460 result=40 06:49:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:49:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:49:36 Aux= 06:49:36 Message to Camera, serial 97515 queued 06:50:13 Received message from Master: op=PointingHead serial=97528 06:50:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:50:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:50:13 Point started: ret=0 06:50:13 point_skyscan result=0 06:50:14 Check angles 06:50:14 SkyScan query 06:50:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:50:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:50:15 Message to Master queued w/err=0: serial=97528 error=0 06:50:20 Received message from Master: op=Filter serial=97529 06:50:20 Color wheel filter change from 0 to 0 06:50:20 FLIGetFilterPos err=0 currentPosition=0 06:50:20 FLIGetStepsRemaining err=0 RemainingSteps=0 06:50:20 Filter is already there-color wheel unchanged 06:50:20 Received message from Master: op=Shutter serial=97530 06:50:20 Shutter LASER close 06:50:20 Received message from Camera: op=State serial=97532 06:50:20 GetSingleValue result=40 Value=cccccccc 06:50:20 SkyScan query 06:50:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:50:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:20 Parameters OK 06:50:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:20 Set A/D data flow result=40 06:50:20 Set A/D channel type result=40 06:50:20 Set A/D encoding result=40 06:50:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:20 Set channel filter=0.000000e+000 result=40 06:50:20 Config A/D Result=40 06:50:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:20 Get A/D filter: -9.255963e+061 result=40 06:50:20 Get A/D value=-858993460 result=40 06:50:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:20 Parameters OK 06:50:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:20 Set A/D data flow result=40 06:50:20 Set A/D channel type result=40 06:50:20 Set A/D encoding result=40 06:50:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:20 Set channel filter=0.000000e+000 result=40 06:50:20 Config A/D Result=40 06:50:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:20 Get A/D filter: -9.255963e+061 result=40 06:50:20 Get A/D value=-858993460 result=40 06:50:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:50:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:50:20 Aux= 06:50:20 Message to Camera, serial 97532 queued 06:50:57 Received message from Master: op=PointingHead serial=97545 06:50:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:50:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:50:58 Point started: ret=0 06:50:58 point_skyscan result=0 06:50:58 Check angles 06:50:58 SkyScan query 06:50:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 06:50:59 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 06:50:59 Check angles 06:50:59 SkyScan query 06:51:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 06:51:00 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 06:51:00 Check angles 06:51:00 SkyScan query 06:51:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.055<-16337 Statuses=0008 0009 06:51:00 Msec=1500 True Az=112.995 Ze=-65.055 Az status=0008 Ze status=0009 06:51:01 Check angles 06:51:01 SkyScan query 06:51:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.04<-17736 Statuses=0008 0009 06:51:01 Msec=2250 True Az=112.995 Ze=-86.04 Az status=0008 Ze status=0009 06:51:01 Check angles 06:51:01 SkyScan query 06:51:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.965<-19131 Statuses=0008 0009 06:51:02 Msec=3000 True Az=112.995 Ze=-106.965 Az status=0008 Ze status=0009 06:51:02 Check angles 06:51:02 SkyScan query 06:51:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.92<-20528 Statuses=0008 0009 06:51:03 Msec=3750 True Az=112.995 Ze=-127.92 Az status=0008 Ze status=0009 06:51:03 Check angles 06:51:03 SkyScan query 06:51:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.86<-21924 Statuses=0008 0009 06:51:03 Msec=4500 True Az=112.995 Ze=-148.86 Az status=0008 Ze status=0009 06:51:04 Check angles 06:51:04 SkyScan query 06:51:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.8<-23320 Statuses=0008 0009 06:51:04 Msec=5250 True Az=112.995 Ze=-169.8 Az status=0008 Ze status=0009 06:51:04 Check angles 06:51:04 SkyScan query 06:51:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:51:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:51:05 Message to Master queued w/err=0: serial=97545 error=0 06:51:10 Received message from Master: op=Filter serial=97546 06:51:10 Color wheel filter change from 0 to 0 06:51:10 FLIGetFilterPos err=0 currentPosition=0 06:51:10 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:10 Filter is already there-color wheel unchanged 06:51:10 Received message from Master: op=Shutter serial=97547 06:51:10 Shutter LASER open 06:51:10 Received message from Camera: op=State serial=97549 06:51:10 GetSingleValue result=40 Value=cccccccc 06:51:10 SkyScan query 06:51:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:51:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:11 Parameters OK 06:51:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:11 Set A/D data flow result=40 06:51:11 Set A/D channel type result=40 06:51:11 Set A/D encoding result=40 06:51:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:11 Set channel filter=0.000000e+000 result=40 06:51:11 Config A/D Result=40 06:51:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:11 Get A/D filter: -9.255963e+061 result=40 06:51:11 Get A/D value=-858993460 result=40 06:51:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:11 Parameters OK 06:51:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:11 Set A/D data flow result=40 06:51:11 Set A/D channel type result=40 06:51:11 Set A/D encoding result=40 06:51:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:11 Set channel filter=0.000000e+000 result=40 06:51:11 Config A/D Result=40 06:51:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:11 Get A/D filter: -9.255963e+061 result=40 06:51:11 Get A/D value=-858993460 result=40 06:51:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:51:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:51:11 Aux= 06:51:11 Message to Camera, serial 97549 queued 06:51:19 Received message from Master: op=Shutter serial=97559 06:51:19 Shutter LASER close 06:51:20 Received message from Master: op=PointingHead serial=97563 06:51:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:51:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:51:20 Point started: ret=0 06:51:20 point_skyscan result=0 06:51:21 Check angles 06:51:21 SkyScan query 06:51:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 06:51:21 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 06:51:22 Check angles 06:51:22 SkyScan query 06:51:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.565<-20171 Statuses=0008 0009 06:51:22 Msec=750 True Az=112.995 Ze=-122.565 Az status=0008 Ze status=0009 06:51:22 Check angles 06:51:22 SkyScan query 06:51:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 06:51:23 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 06:51:23 Check angles 06:51:23 SkyScan query 06:51:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.725<-17315 Statuses=0008 0009 06:51:24 Msec=2250 True Az=112.995 Ze=-79.725 Az status=0008 Ze status=0009 06:51:24 Check angles 06:51:24 SkyScan query 06:51:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 06:51:24 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 06:51:25 Check angles 06:51:25 SkyScan query 06:51:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.815<-14521 Statuses=0008 0009 06:51:25 Msec=3750 True Az=112.995 Ze=-37.815 Az status=0008 Ze status=0009 06:51:25 Check angles 06:51:25 SkyScan query 06:51:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.89<-13126 Statuses=0008 0009 06:51:26 Msec=4500 True Az=112.995 Ze=-16.89 Az status=0008 Ze status=0009 06:51:26 Check angles 06:51:26 SkyScan query 06:51:27 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 06:51:27 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 06:51:27 Check angles 06:51:27 SkyScan query 06:51:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:51:27 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:51:27 Message to Master queued w/err=0: serial=97563 error=0 06:51:32 Received message from Master: op=Filter serial=97564 06:51:32 Color wheel filter change from 0 to 0 06:51:32 FLIGetFilterPos err=0 currentPosition=0 06:51:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:32 Filter is already there-color wheel unchanged 06:51:33 Received message from Master: op=Shutter serial=97565 06:51:33 Shutter LASER close 06:51:33 Received message from Camera: op=State serial=97567 06:51:33 GetSingleValue result=40 Value=cccccccc 06:51:33 SkyScan query 06:51:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:51:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:33 Parameters OK 06:51:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:33 Set A/D data flow result=40 06:51:33 Set A/D channel type result=40 06:51:33 Set A/D encoding result=40 06:51:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:33 Set channel filter=0.000000e+000 result=40 06:51:33 Config A/D Result=40 06:51:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:33 Get A/D filter: -9.255963e+061 result=40 06:51:33 Get A/D value=-858993460 result=40 06:51:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:33 Parameters OK 06:51:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:33 Set A/D data flow result=40 06:51:33 Set A/D channel type result=40 06:51:33 Set A/D encoding result=40 06:51:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:33 Set channel filter=0.000000e+000 result=40 06:51:33 Config A/D Result=40 06:51:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:33 Get A/D filter: -9.255963e+061 result=40 06:51:33 Get A/D value=-858993460 result=40 06:51:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:51:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:51:33 Aux= 06:51:33 Message to Camera, serial 97567 queued 06:52:10 Received message from Master: op=PointingHead serial=97580 06:52:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:52:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:52:11 Point started: ret=0 06:52:11 point_skyscan result=0 06:52:11 Check angles 06:52:11 SkyScan query 06:52:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:52:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:52:12 Message to Master queued w/err=0: serial=97580 error=0 06:52:17 Received message from Master: op=Filter serial=97581 06:52:17 Color wheel filter change from 0 to 0 06:52:17 FLIGetFilterPos err=0 currentPosition=0 06:52:17 FLIGetStepsRemaining err=0 RemainingSteps=0 06:52:17 Filter is already there-color wheel unchanged 06:52:17 Received message from Master: op=Shutter serial=97582 06:52:17 Shutter LASER close 06:52:17 Received message from Camera: op=State serial=97584 06:52:17 GetSingleValue result=40 Value=cccccccc 06:52:17 SkyScan query 06:52:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:52:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:18 Parameters OK 06:52:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:18 Set A/D data flow result=40 06:52:18 Set A/D channel type result=40 06:52:18 Set A/D encoding result=40 06:52:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:18 Set channel filter=0.000000e+000 result=40 06:52:18 Config A/D Result=40 06:52:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:18 Get A/D filter: -9.255963e+061 result=40 06:52:18 Get A/D value=-858993460 result=40 06:52:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:18 Parameters OK 06:52:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:18 Set A/D data flow result=40 06:52:18 Set A/D channel type result=40 06:52:18 Set A/D encoding result=40 06:52:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:18 Set channel filter=0.000000e+000 result=40 06:52:18 Config A/D Result=40 06:52:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:18 Get A/D filter: -9.255963e+061 result=40 06:52:18 Get A/D value=-858993460 result=40 06:52:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:52:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:52:18 Aux= 06:52:18 Message to Camera, serial 97584 queued 06:52:55 Received message from Master: op=PointingHead serial=97597 06:52:55 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:52:55 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:52:55 Point started: ret=0 06:52:55 point_skyscan result=0 06:52:56 Check angles 06:52:56 SkyScan query 06:52:56 SkyScan query done: ret=0 az=135.855<-9057 ze=-6.51<-12434 Statuses=0009 0008 06:52:56 Msec=0 True Az=135.855 Ze=-6.51 Az status=0009 Ze status=0008 06:52:56 Check angles 06:52:56 SkyScan query 06:52:57 SkyScan query done: ret=0 az=153.285<-10219 ze=-6.495<-12433 Statuses=0009 0008 06:52:57 Msec=750 True Az=153.285 Ze=-6.495 Az status=0009 Ze status=0008 06:52:57 Check angles 06:52:57 SkyScan query 06:52:58 SkyScan query done: ret=0 az=170.805<-11387 ze=-6.495<-12433 Statuses=0009 0008 06:52:58 Msec=1500 True Az=170.805 Ze=-6.495 Az status=0009 Ze status=0008 06:52:58 Check angles 06:52:58 SkyScan query 06:52:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:52:59 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:52:59 Message to Master queued w/err=0: serial=97597 error=0 06:53:04 Received message from Master: op=Filter serial=97598 06:53:04 Color wheel filter change from 0 to 0 06:53:04 FLIGetFilterPos err=0 currentPosition=0 06:53:04 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:04 Filter is already there-color wheel unchanged 06:53:04 Received message from Master: op=Shutter serial=97599 06:53:04 Shutter LASER close 06:53:04 Received message from Camera: op=State serial=97601 06:53:04 GetSingleValue result=40 Value=cccccccc 06:53:04 SkyScan query 06:53:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:53:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:04 Parameters OK 06:53:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:04 Set A/D data flow result=40 06:53:04 Set A/D channel type result=40 06:53:04 Set A/D encoding result=40 06:53:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:04 Set channel filter=0.000000e+000 result=40 06:53:04 Config A/D Result=40 06:53:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:04 Get A/D filter: -9.255963e+061 result=40 06:53:04 Get A/D value=-858993460 result=40 06:53:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:04 Parameters OK 06:53:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:04 Set A/D data flow result=40 06:53:04 Set A/D channel type result=40 06:53:04 Set A/D encoding result=40 06:53:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:04 Set channel filter=0.000000e+000 result=40 06:53:04 Config A/D Result=40 06:53:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:04 Get A/D filter: -9.255963e+061 result=40 06:53:04 Get A/D value=-858993460 result=40 06:53:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:04 Aux= 06:53:04 Message to Camera, serial 97601 queued 06:53:41 Received message from Master: op=PointingHead serial=97614 06:53:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:53:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:53:42 Point started: ret=0 06:53:42 point_skyscan result=0 06:53:42 Check angles 06:53:42 SkyScan query 06:53:43 SkyScan query done: ret=0 az=152.55<-10170 ze=6.51<-11566 Statuses=0009 0008 06:53:43 Msec=0 True Az=152.55 Ze=6.51 Az status=0009 Ze status=0008 06:53:43 Check angles 06:53:43 SkyScan query 06:53:44 SkyScan query done: ret=0 az=135.075<-9005 ze=6.495<-11567 Statuses=0009 0008 06:53:44 Msec=750 True Az=135.075 Ze=6.495 Az status=0009 Ze status=0008 06:53:44 Check angles 06:53:44 SkyScan query 06:53:44 SkyScan query done: ret=0 az=117.6<-7840 ze=6.495<-11567 Statuses=0009 0008 06:53:44 Msec=1500 True Az=117.6 Ze=6.495 Az status=0009 Ze status=0008 06:53:45 Check angles 06:53:45 SkyScan query 06:53:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:53:45 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:53:45 Message to Master queued w/err=0: serial=97614 error=0 06:53:50 Received message from Master: op=Filter serial=97615 06:53:50 Color wheel filter change from 0 to 0 06:53:50 FLIGetFilterPos err=0 currentPosition=0 06:53:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:50 Filter is already there-color wheel unchanged 06:53:50 Received message from Master: op=Shutter serial=97616 06:53:50 Shutter LASER close 06:53:50 Received message from Camera: op=State serial=97618 06:53:50 GetSingleValue result=40 Value=cccccccc 06:53:50 SkyScan query 06:53:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:53:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:51 Parameters OK 06:53:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:51 Set A/D data flow result=40 06:53:51 Set A/D channel type result=40 06:53:51 Set A/D encoding result=40 06:53:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:51 Set channel filter=0.000000e+000 result=40 06:53:51 Config A/D Result=40 06:53:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:51 Get A/D filter: -9.255963e+061 result=40 06:53:51 Get A/D value=-858993460 result=40 06:53:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:51 Parameters OK 06:53:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:51 Set A/D data flow result=40 06:53:51 Set A/D channel type result=40 [UTC 2019-3-4 06:53:51] 06:53:51 Set A/D encoding result=40 06:53:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:51 Set channel filter=0.000000e+000 result=40 06:53:51 Config A/D Result=40 06:53:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:51 Get A/D filter: -9.255963e+061 result=40 06:53:51 Get A/D value=-858993460 result=40 06:53:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:51 Aux= 06:53:51 Message to Camera, serial 97618 queued 06:54:28 Received message from Master: op=PointingHead serial=97631 06:54:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:54:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:54:28 Point started: ret=0 06:54:28 point_skyscan result=0 06:54:29 Check angles 06:54:29 SkyScan query 06:54:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 06:54:29 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 06:54:30 Check angles 06:54:30 SkyScan query 06:54:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.19<-14946 Statuses=0008 0009 06:54:30 Msec=750 True Az=112.995 Ze=-44.19 Az status=0008 Ze status=0009 06:54:30 Check angles 06:54:30 SkyScan query 06:54:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.1<-16340 Statuses=0008 0009 06:54:31 Msec=1500 True Az=112.995 Ze=-65.1 Az status=0008 Ze status=0009 06:54:31 Check angles 06:54:31 SkyScan query 06:54:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.07<-17738 Statuses=0008 0009 06:54:32 Msec=2250 True Az=112.995 Ze=-86.07 Az status=0008 Ze status=0009 06:54:32 Check angles 06:54:32 SkyScan query 06:54:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.995<-19133 Statuses=0008 0009 06:54:32 Msec=3000 True Az=112.995 Ze=-106.995 Az status=0008 Ze status=0009 06:54:33 Check angles 06:54:33 SkyScan query 06:54:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.95<-20530 Statuses=0008 0009 06:54:33 Msec=3750 True Az=112.995 Ze=-127.95 Az status=0008 Ze status=0009 06:54:33 Check angles 06:54:33 SkyScan query 06:54:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.89<-21926 Statuses=0008 0009 06:54:34 Msec=4500 True Az=112.995 Ze=-148.89 Az status=0008 Ze status=0009 06:54:34 Check angles 06:54:34 SkyScan query 06:54:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.845<-23323 Statuses=0008 0009 06:54:35 Msec=5250 True Az=112.995 Ze=-169.845 Az status=0008 Ze status=0009 06:54:35 Check angles 06:54:35 SkyScan query 06:54:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:54:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:54:35 Message to Master queued w/err=0: serial=97631 error=0 06:54:40 Received message from Master: op=Filter serial=97632 06:54:40 Color wheel filter change from 0 to 0 06:54:40 FLIGetFilterPos err=0 currentPosition=0 06:54:40 FLIGetStepsRemaining err=0 RemainingSteps=0 06:54:40 Filter is already there-color wheel unchanged 06:54:41 Received message from Master: op=Shutter serial=97633 06:54:41 Shutter LASER open 06:54:41 Received message from Camera: op=State serial=97635 06:54:41 GetSingleValue result=40 Value=cccccccc 06:54:41 SkyScan query 06:54:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:54:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:41 Parameters OK 06:54:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:41 Set A/D data flow result=40 06:54:41 Set A/D channel type result=40 06:54:41 Set A/D encoding result=40 06:54:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:41 Set channel filter=0.000000e+000 result=40 06:54:41 Config A/D Result=40 06:54:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:41 Get A/D filter: -9.255963e+061 result=40 06:54:41 Get A/D value=-858993460 result=40 06:54:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:41 Parameters OK 06:54:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:41 Set A/D data flow result=40 06:54:41 Set A/D channel type result=40 06:54:41 Set A/D encoding result=40 06:54:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:41 Set channel filter=0.000000e+000 result=40 06:54:41 Config A/D Result=40 06:54:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:41 Get A/D filter: -9.255963e+061 result=40 06:54:41 Get A/D value=-858993460 result=40 06:54:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:54:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:54:41 Aux= 06:54:41 Message to Camera, serial 97635 queued 06:54:50 Received message from Master: op=Shutter serial=97645 06:54:50 Shutter LASER close 06:54:50 Received message from Master: op=PointingHead serial=97649 06:54:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:54:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:54:51 Point started: ret=0 06:54:51 point_skyscan result=0 06:54:51 Check angles 06:54:51 SkyScan query 06:54:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 06:54:52 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 06:54:52 Check angles 06:54:52 SkyScan query 06:54:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.49<-20166 Statuses=0008 0009 06:54:53 Msec=750 True Az=112.995 Ze=-122.49 Az status=0008 Ze status=0009 06:54:53 Check angles 06:54:53 SkyScan query 06:54:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 06:54:53 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 06:54:54 Check angles 06:54:54 SkyScan query 06:54:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.1<-17340 Statuses=0008 0009 06:54:54 Msec=2250 True Az=112.995 Ze=-80.1 Az status=0008 Ze status=0009 06:54:54 Check angles 06:54:54 SkyScan query 06:54:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.16<-15944 Statuses=0008 0009 06:54:55 Msec=3000 True Az=112.995 Ze=-59.16 Az status=0008 Ze status=0009 06:54:55 Check angles 06:54:55 SkyScan query 06:54:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.725<-14515 Statuses=0008 0009 06:54:56 Msec=3750 True Az=112.995 Ze=-37.725 Az status=0008 Ze status=0009 06:54:56 Check angles 06:54:56 SkyScan query 06:54:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.785<-13119 Statuses=0008 0009 06:54:56 Msec=4500 True Az=112.995 Ze=-16.785 Az status=0008 Ze status=0009 06:54:57 Check angles 06:54:57 SkyScan query 06:54:57 SkyScan query done: ret=0 az=113.01<-7534 ze=4.155<-11723 Statuses=0008 0009 06:54:57 Msec=5250 True Az=113.01 Ze=4.155 Az status=0008 Ze status=0009 06:54:57 Check angles 06:54:57 SkyScan query 06:54:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:54:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:54:58 Message to Master queued w/err=0: serial=97649 error=0 06:55:03 Received message from Master: op=Filter serial=97650 06:55:03 Color wheel filter change from 0 to 0 06:55:03 FLIGetFilterPos err=0 currentPosition=0 06:55:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:55:03 Filter is already there-color wheel unchanged 06:55:03 Received message from Master: op=Shutter serial=97651 06:55:03 Shutter LASER close 06:55:03 Received message from Camera: op=State serial=97653 06:55:03 GetSingleValue result=40 Value=cccccccc 06:55:03 SkyScan query 06:55:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:55:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:04 Parameters OK 06:55:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:04 Set A/D data flow result=40 06:55:04 Set A/D channel type result=40 06:55:04 Set A/D encoding result=40 06:55:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:04 Set channel filter=0.000000e+000 result=40 06:55:04 Config A/D Result=40 06:55:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:04 Get A/D filter: -9.255963e+061 result=40 06:55:04 Get A/D value=-858993460 result=40 06:55:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:04 Parameters OK 06:55:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:04 Set A/D data flow result=40 06:55:04 Set A/D channel type result=40 06:55:04 Set A/D encoding result=40 06:55:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:04 Set channel filter=0.000000e+000 result=40 06:55:04 Config A/D Result=40 06:55:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:04 Get A/D filter: -9.255963e+061 result=40 06:55:04 Get A/D value=-858993460 result=40 06:55:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:04 Aux= 06:55:04 Message to Camera, serial 97653 queued 06:55:41 Received message from Master: op=PointingHead serial=97666 06:55:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:55:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:55:41 Point started: ret=0 06:55:41 point_skyscan result=0 06:55:42 Check angles 06:55:42 SkyScan query 06:55:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:55:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:55:42 Message to Master queued w/err=0: serial=97666 error=0 06:55:47 Received message from Master: op=Filter serial=97667 06:55:47 Color wheel filter change from 0 to 0 06:55:47 FLIGetFilterPos err=0 currentPosition=0 06:55:47 FLIGetStepsRemaining err=0 RemainingSteps=0 06:55:47 Filter is already there-color wheel unchanged 06:55:47 Received message from Master: op=Shutter serial=97668 06:55:47 Shutter LASER close 06:55:48 Received message from Camera: op=State serial=97670 06:55:48 GetSingleValue result=40 Value=cccccccc 06:55:48 SkyScan query 06:55:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:55:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:48 Parameters OK 06:55:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:48 Set A/D data flow result=40 06:55:48 Set A/D channel type result=40 06:55:48 Set A/D encoding result=40 06:55:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:48 Set channel filter=0.000000e+000 result=40 06:55:48 Config A/D Result=40 06:55:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:48 Get A/D filter: -9.255963e+061 result=40 06:55:48 Get A/D value=-858993460 result=40 06:55:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:48 Parameters OK 06:55:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:48 Set A/D data flow result=40 06:55:48 Set A/D channel type result=40 06:55:48 Set A/D encoding result=40 06:55:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:48 Set channel filter=0.000000e+000 result=40 06:55:48 Config A/D Result=40 06:55:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:48 Get A/D filter: -9.255963e+061 result=40 06:55:48 Get A/D value=-858993460 result=40 06:55:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:48 Aux= 06:55:48 Message to Camera, serial 97670 queued 06:56:25 Received message from Master: op=PointingHead serial=97683 06:56:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:56:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:56:25 Point started: ret=0 06:56:25 point_skyscan result=0 06:56:26 Check angles 06:56:26 SkyScan query 06:56:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:56:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:56:27 Message to Master queued w/err=0: serial=97683 error=0 06:56:32 Received message from Master: op=Filter serial=97684 06:56:32 Color wheel filter change from 0 to 0 06:56:32 FLIGetFilterPos err=0 currentPosition=0 06:56:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:56:32 Filter is already there-color wheel unchanged 06:56:32 Received message from Master: op=Shutter serial=97685 06:56:32 Shutter LASER close 06:56:32 Received message from Camera: op=State serial=97687 06:56:32 GetSingleValue result=40 Value=cccccccc 06:56:32 SkyScan query 06:56:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:56:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:32 Parameters OK 06:56:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:32 Set A/D data flow result=40 06:56:32 Set A/D channel type result=40 06:56:32 Set A/D encoding result=40 06:56:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:32 Set channel filter=0.000000e+000 result=40 06:56:32 Config A/D Result=40 06:56:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:32 Get A/D filter: -9.255963e+061 result=40 06:56:32 Get A/D value=-858993460 result=40 06:56:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:32 Parameters OK 06:56:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:32 Set A/D data flow result=40 06:56:32 Set A/D channel type result=40 06:56:32 Set A/D encoding result=40 06:56:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:32 Set channel filter=0.000000e+000 result=40 06:56:32 Config A/D Result=40 06:56:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:32 Get A/D filter: -9.255963e+061 result=40 06:56:32 Get A/D value=-858993460 result=40 06:56:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:56:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:56:32 Aux= 06:56:32 Message to Camera, serial 97687 queued 06:57:09 Received message from Master: op=PointingHead serial=97700 06:57:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:57:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:57:10 Point started: ret=0 06:57:10 point_skyscan result=0 06:57:10 Check angles 06:57:10 SkyScan query 06:57:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:57:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:57:11 Message to Master queued w/err=0: serial=97700 error=0 06:57:16 Received message from Master: op=Filter serial=97701 06:57:16 Color wheel filter change from 0 to 0 06:57:16 FLIGetFilterPos err=0 currentPosition=0 06:57:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:57:16 Filter is already there-color wheel unchanged 06:57:16 Received message from Master: op=Shutter serial=97702 06:57:16 Shutter LASER close 06:57:16 Received message from Camera: op=State serial=97704 06:57:16 GetSingleValue result=40 Value=cccccccc 06:57:16 SkyScan query 06:57:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:57:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:17 Parameters OK 06:57:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:17 Set A/D data flow result=40 06:57:17 Set A/D channel type result=40 06:57:17 Set A/D encoding result=40 06:57:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:17 Set channel filter=0.000000e+000 result=40 06:57:17 Config A/D Result=40 06:57:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:17 Get A/D filter: -9.255963e+061 result=40 06:57:17 Get A/D value=-858993460 result=40 06:57:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:17 Parameters OK 06:57:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:17 Set A/D data flow result=40 06:57:17 Set A/D channel type result=40 06:57:17 Set A/D encoding result=40 06:57:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:17 Set channel filter=0.000000e+000 result=40 06:57:17 Config A/D Result=40 06:57:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:17 Get A/D filter: -9.255963e+061 result=40 06:57:17 Get A/D value=-858993460 result=40 06:57:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:57:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:57:17 Aux= 06:57:17 Message to Camera, serial 97704 queued 06:57:54 Received message from Master: op=PointingHead serial=97717 06:57:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:57:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:57:54 Point started: ret=0 06:57:54 point_skyscan result=0 06:57:55 Check angles 06:57:55 SkyScan query 06:57:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 06:57:55 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 06:57:55 Check angles 06:57:55 SkyScan query 06:57:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 06:57:56 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 06:57:56 Check angles 06:57:56 SkyScan query 06:57:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.075<-16405 Statuses=0008 0009 06:57:57 Msec=1500 True Az=112.995 Ze=-66.075 Az status=0008 Ze status=0009 06:57:57 Check angles 06:57:57 SkyScan query 06:57:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.03<-17802 Statuses=0008 0009 06:57:58 Msec=2250 True Az=112.995 Ze=-87.03 Az status=0008 Ze status=0009 06:57:58 Check angles 06:57:58 SkyScan query 06:57:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.97<-19198 Statuses=0008 0009 06:57:58 Msec=3000 True Az=112.995 Ze=-107.97 Az status=0008 Ze status=0009 06:57:58 Check angles 06:57:58 SkyScan query 06:57:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.91<-20594 Statuses=0008 0009 06:57:59 Msec=3750 True Az=112.995 Ze=-128.91 Az status=0008 Ze status=0009 06:57:59 Check angles 06:57:59 SkyScan query 06:58:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.895<-21993 Statuses=0008 0009 06:58:00 Msec=4500 True Az=112.995 Ze=-149.895 Az status=0008 Ze status=0009 06:58:00 Check angles 06:58:00 SkyScan query 06:58:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.775<-23385 Statuses=0008 0009 06:58:01 Msec=5250 True Az=112.995 Ze=-170.775 Az status=0008 Ze status=0009 06:58:01 Check angles 06:58:01 SkyScan query 06:58:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:58:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:58:01 Message to Master queued w/err=0: serial=97717 error=0 06:58:06 Received message from Master: op=Filter serial=97718 06:58:06 Color wheel filter change from 0 to 0 06:58:06 FLIGetFilterPos err=0 currentPosition=0 06:58:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:06 Filter is already there-color wheel unchanged 06:58:06 Received message from Master: op=Shutter serial=97719 06:58:06 Shutter LASER open 06:58:07 Received message from Camera: op=State serial=97721 06:58:07 GetSingleValue result=40 Value=cccccccc 06:58:07 SkyScan query 06:58:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:58:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:07 Parameters OK 06:58:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:07 Set A/D data flow result=40 06:58:07 Set A/D channel type result=40 06:58:07 Set A/D encoding result=40 06:58:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:07 Set channel filter=0.000000e+000 result=40 06:58:07 Config A/D Result=40 06:58:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:07 Get A/D filter: -9.255963e+061 result=40 06:58:07 Get A/D value=-858993460 result=40 06:58:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:07 Parameters OK 06:58:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:07 Set A/D data flow result=40 06:58:07 Set A/D channel type result=40 06:58:07 Set A/D encoding result=40 06:58:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:07 Set channel filter=0.000000e+000 result=40 06:58:07 Config A/D Result=40 06:58:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:07 Get A/D filter: -9.255963e+061 result=40 06:58:07 Get A/D value=-858993460 result=40 06:58:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:07 Aux= 06:58:07 Message to Camera, serial 97721 queued 06:58:16 Received message from Master: op=Shutter serial=97731 06:58:16 Shutter LASER close 06:58:16 Received message from Master: op=PointingHead serial=97735 06:58:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:58:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:58:17 Point started: ret=0 06:58:17 point_skyscan result=0 06:58:17 Check angles 06:58:17 SkyScan query 06:58:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 06:58:18 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 06:58:18 Check angles 06:58:18 SkyScan query 06:58:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.53<-20102 Statuses=0008 0009 06:58:19 Msec=750 True Az=112.995 Ze=-121.53 Az status=0008 Ze status=0009 06:58:19 Check angles 06:58:19 SkyScan query 06:58:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.62<-18708 Statuses=0008 0009 06:58:19 Msec=1500 True Az=112.995 Ze=-100.62 Az status=0008 Ze status=0009 06:58:20 Check angles 06:58:20 SkyScan query 06:58:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.65<-17310 Statuses=0008 0009 06:58:20 Msec=2250 True Az=112.995 Ze=-79.65 Az status=0008 Ze status=0009 06:58:20 Check angles 06:58:20 SkyScan query 06:58:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.71<-15914 Statuses=0008 0009 06:58:21 Msec=3000 True Az=112.995 Ze=-58.71 Az status=0008 Ze status=0009 06:58:21 Check angles 06:58:21 SkyScan query 06:58:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.74<-14516 Statuses=0008 0009 06:58:22 Msec=3750 True Az=112.995 Ze=-37.74 Az status=0008 Ze status=0009 06:58:22 Check angles 06:58:22 SkyScan query 06:58:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.815<-13121 Statuses=0008 0009 06:58:22 Msec=4500 True Az=112.995 Ze=-16.815 Az status=0008 Ze status=0009 06:58:23 Check angles 06:58:23 SkyScan query 06:58:23 SkyScan query done: ret=0 az=112.995<-7533 ze=4.14<-11724 Statuses=0008 0009 06:58:23 Msec=5250 True Az=112.995 Ze=4.14 Az status=0008 Ze status=0009 06:58:23 Check angles 06:58:23 SkyScan query 06:58:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:58:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:58:24 Message to Master queued w/err=0: serial=97735 error=0 06:58:29 Received message from Master: op=Filter serial=97736 06:58:29 Color wheel filter change from 0 to 0 06:58:29 FLIGetFilterPos err=0 currentPosition=0 06:58:29 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:29 Filter is already there-color wheel unchanged 06:58:29 Received message from Master: op=Shutter serial=97737 06:58:29 Shutter LASER close 06:58:29 Received message from Camera: op=State serial=97739 06:58:29 GetSingleValue result=40 Value=cccccccc 06:58:29 SkyScan query 06:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:58:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:30 Parameters OK 06:58:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:30 Set A/D data flow result=40 06:58:30 Set A/D channel type result=40 06:58:30 Set A/D encoding result=40 06:58:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:30 Set channel filter=0.000000e+000 result=40 06:58:30 Config A/D Result=40 06:58:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:30 Get A/D filter: -9.255963e+061 result=40 06:58:30 Get A/D value=-858993460 result=40 06:58:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:30 Parameters OK 06:58:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:30 Set A/D data flow result=40 06:58:30 Set A/D channel type result=40 06:58:30 Set A/D encoding result=40 06:58:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:30 Set channel filter=0.000000e+000 result=40 06:58:30 Config A/D Result=40 06:58:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:30 Get A/D filter: -9.255963e+061 result=40 06:58:30 Get A/D value=-858993460 result=40 06:58:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:30 Aux= 06:58:30 Message to Camera, serial 97739 queued 06:59:07 Received message from Master: op=PointingHead serial=97752 06:59:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:59:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:59:07 Point started: ret=0 06:59:07 point_skyscan result=0 06:59:08 Check angles 06:59:08 SkyScan query 06:59:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:59:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:59:08 Message to Master queued w/err=0: serial=97752 error=0 06:59:13 Received message from Master: op=Filter serial=97753 06:59:13 Color wheel filter change from 0 to 0 06:59:13 FLIGetFilterPos err=0 currentPosition=0 06:59:13 FLIGetStepsRemaining err=0 RemainingSteps=0 06:59:13 Filter is already there-color wheel unchanged 06:59:14 Received message from Master: op=Shutter serial=97754 06:59:14 Shutter LASER close 06:59:14 Received message from Camera: op=State serial=97756 06:59:14 GetSingleValue result=40 Value=cccccccc 06:59:14 SkyScan query 06:59:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:59:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:14 Parameters OK 06:59:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:14 Set A/D data flow result=40 06:59:14 Set A/D channel type result=40 06:59:14 Set A/D encoding result=40 06:59:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:14 Set channel filter=0.000000e+000 result=40 06:59:14 Config A/D Result=40 06:59:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:14 Get A/D filter: -9.255963e+061 result=40 06:59:14 Get A/D value=-858993460 result=40 06:59:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:14 Parameters OK 06:59:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:14 Set A/D data flow result=40 06:59:14 Set A/D channel type result=40 06:59:14 Set A/D encoding result=40 06:59:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:14 Set channel filter=0.000000e+000 result=40 06:59:14 Config A/D Result=40 06:59:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:14 Get A/D filter: -9.255963e+061 result=40 06:59:14 Get A/D value=-858993460 result=40 06:59:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:59:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:59:14 Aux= 06:59:14 Message to Camera, serial 97756 queued 06:59:51 Received message from Master: op=PointingHead serial=97769 06:59:51 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:59:51 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:59:51 Point started: ret=0 06:59:51 point_skyscan result=0 06:59:52 Check angles 06:59:52 SkyScan query 06:59:53 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 06:59:53 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 06:59:53 Check angles 06:59:53 SkyScan query 06:59:53 SkyScan query done: ret=0 az=153.465<-10231 ze=-6.51<-12434 Statuses=0009 0008 06:59:53 Msec=750 True Az=153.465 Ze=-6.51 Az status=0009 Ze status=0008 06:59:54 Check angles 06:59:54 SkyScan query 06:59:54 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 06:59:54 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 06:59:54 Check angles 06:59:54 SkyScan query 06:59:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:59:55 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 06:59:55 Message to Master queued w/err=0: serial=97769 error=0 07:00:00 Received message from Master: op=Filter serial=97770 07:00:00 Color wheel filter change from 0 to 0 07:00:00 FLIGetFilterPos err=0 currentPosition=0 07:00:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:00 Filter is already there-color wheel unchanged 07:00:00 Received message from Master: op=Shutter serial=97771 07:00:00 Shutter LASER close 07:00:00 Received message from Camera: op=State serial=97773 07:00:00 GetSingleValue result=40 Value=cccccccc 07:00:00 SkyScan query 07:00:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:00:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:01 Parameters OK 07:00:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:01 Set A/D data flow result=40 07:00:01 Set A/D channel type result=40 07:00:01 Set A/D encoding result=40 07:00:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:01 Set channel filter=0.000000e+000 result=40 07:00:01 Config A/D Result=40 07:00:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:01 Get A/D filter: -9.255963e+061 result=40 07:00:01 Get A/D value=-858993460 result=40 07:00:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:01 Parameters OK 07:00:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:01 Set A/D data flow result=40 07:00:01 Set A/D channel type result=40 07:00:01 Set A/D encoding result=40 07:00:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:01 Set channel filter=0.000000e+000 result=40 07:00:01 Config A/D Result=40 07:00:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:01 Get A/D filter: -9.255963e+061 result=40 07:00:01 Get A/D value=-858993460 result=40 07:00:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:00:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:00:01 Aux= 07:00:01 Message to Camera, serial 97773 queued 07:00:38 Received message from Master: op=PointingHead serial=97786 07:00:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:00:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:00:38 Point started: ret=0 07:00:38 point_skyscan result=0 07:00:39 Check angles 07:00:39 SkyScan query 07:00:39 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 07:00:39 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 07:00:39 Check angles 07:00:39 SkyScan query 07:00:40 SkyScan query done: ret=0 az=135.345<-9023 ze=6.495<-11567 Statuses=0009 0008 07:00:40 Msec=750 True Az=135.345 Ze=6.495 Az status=0009 Ze status=0008 07:00:40 Check angles 07:00:40 SkyScan query 07:00:41 SkyScan query done: ret=0 az=117.885<-7859 ze=6.495<-11567 Statuses=0009 0008 07:00:41 Msec=1500 True Az=117.885 Ze=6.495 Az status=0009 Ze status=0008 07:00:41 Check angles 07:00:41 SkyScan query 07:00:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:00:41 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:00:41 Message to Master queued w/err=0: serial=97786 error=0 07:00:46 Received message from Master: op=Filter serial=97787 07:00:46 Color wheel filter change from 0 to 0 07:00:46 FLIGetFilterPos err=0 currentPosition=0 07:00:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:46 Filter is already there-color wheel unchanged 07:00:47 Received message from Master: op=Shutter serial=97788 07:00:47 Shutter LASER close 07:00:47 Received message from Camera: op=State serial=97790 07:00:47 GetSingleValue result=40 Value=cccccccc 07:00:47 SkyScan query 07:00:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:00:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:47 Parameters OK 07:00:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:47 Set A/D data flow result=40 07:00:47 Set A/D channel type result=40 07:00:47 Set A/D encoding result=40 07:00:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:47 Set channel filter=0.000000e+000 result=40 07:00:47 Config A/D Result=40 07:00:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:47 Get A/D filter: -9.255963e+061 result=40 07:00:47 Get A/D value=-858993460 result=40 07:00:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:47 Parameters OK 07:00:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:47 Set A/D data flow result=40 07:00:47 Set A/D channel type result=40 07:00:47 Set A/D encoding result=40 07:00:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:47 Set channel filter=0.000000e+000 result=40 07:00:47 Config A/D Result=40 07:00:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:47 Get A/D filter: -9.255963e+061 result=40 07:00:47 Get A/D value=-858993460 result=40 07:00:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:00:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:00:47 Aux= 07:00:47 Message to Camera, serial 97790 queued 07:01:24 Received message from Master: op=PointingHead serial=97803 07:01:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:01:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:01:24 Point started: ret=0 07:01:24 point_skyscan result=0 07:01:25 Check angles 07:01:25 SkyScan query 07:01:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 07:01:26 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 07:01:26 Check angles 07:01:26 SkyScan query 07:01:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 07:01:26 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 07:01:27 Check angles 07:01:27 SkyScan query 07:01:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.355<-16357 Statuses=0008 0009 07:01:27 Msec=1500 True Az=112.995 Ze=-65.355 Az status=0008 Ze status=0009 07:01:27 Check angles 07:01:27 SkyScan query 07:01:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.31<-17754 Statuses=0008 0009 07:01:28 Msec=2250 True Az=112.995 Ze=-86.31 Az status=0008 Ze status=0009 07:01:28 Check angles 07:01:28 SkyScan query 07:01:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.715<-19181 Statuses=0008 0009 07:01:29 Msec=3000 True Az=112.995 Ze=-107.715 Az status=0008 Ze status=0009 07:01:29 Check angles 07:01:29 SkyScan query 07:01:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.64<-20576 Statuses=0008 0009 07:01:29 Msec=3750 True Az=112.995 Ze=-128.64 Az status=0008 Ze status=0009 07:01:30 Check angles 07:01:30 SkyScan query 07:01:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.625<-21975 Statuses=0008 0009 07:01:30 Msec=4500 True Az=112.995 Ze=-149.625 Az status=0008 Ze status=0009 07:01:30 Check angles 07:01:30 SkyScan query 07:01:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.91<-23394 Statuses=0008 0009 07:01:31 Msec=5250 True Az=112.995 Ze=-170.91 Az status=0008 Ze status=0009 07:01:31 Check angles 07:01:31 SkyScan query 07:01:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:01:32 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:01:32 Message to Master queued w/err=0: serial=97803 error=0 07:01:37 Received message from Master: op=Filter serial=97804 07:01:37 Color wheel filter change from 0 to 0 07:01:37 FLIGetFilterPos err=0 currentPosition=0 07:01:37 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:37 Filter is already there-color wheel unchanged 07:01:37 Received message from Master: op=Shutter serial=97805 07:01:37 Shutter LASER open 07:01:37 Received message from Camera: op=State serial=97807 07:01:37 GetSingleValue result=40 Value=cccccccc 07:01:37 SkyScan query 07:01:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:01:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:38 Parameters OK 07:01:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:38 Set A/D data flow result=40 07:01:38 Set A/D channel type result=40 07:01:38 Set A/D encoding result=40 07:01:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:38 Set channel filter=0.000000e+000 result=40 07:01:38 Config A/D Result=40 07:01:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:38 Get A/D filter: -9.255963e+061 result=40 07:01:38 Get A/D value=-858993460 result=40 07:01:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:38 Parameters OK 07:01:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:38 Set A/D data flow result=40 07:01:38 Set A/D channel type result=40 07:01:38 Set A/D encoding result=40 07:01:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:38 Set channel filter=0.000000e+000 result=40 07:01:38 Config A/D Result=40 07:01:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:38 Get A/D filter: -9.255963e+061 result=40 07:01:38 Get A/D value=-858993460 result=40 07:01:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:01:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:01:38 Aux= 07:01:38 Message to Camera, serial 97807 queued 07:01:46 Received message from Master: op=Shutter serial=97817 07:01:46 Shutter LASER close 07:01:47 Received message from Master: op=PointingHead serial=97821 07:01:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:01:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:01:47 Point started: ret=0 07:01:47 point_skyscan result=0 07:01:48 Check angles 07:01:48 SkyScan query 07:01:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.71<-21514 Statuses=0008 0009 07:01:48 Msec=0 True Az=112.995 Ze=-142.71 Az status=0008 Ze status=0009 07:01:49 Check angles 07:01:49 SkyScan query 07:01:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.71<-20114 Statuses=0008 0009 07:01:49 Msec=750 True Az=112.995 Ze=-121.71 Az status=0008 Ze status=0009 07:01:49 Check angles 07:01:49 SkyScan query 07:01:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.815<-18721 Statuses=0008 0009 07:01:50 Msec=1500 True Az=112.995 Ze=-100.815 Az status=0008 Ze status=0009 07:01:50 Check angles 07:01:50 SkyScan query 07:01:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.845<-17323 Statuses=0008 0009 07:01:51 Msec=2250 True Az=112.995 Ze=-79.845 Az status=0008 Ze status=0009 07:01:51 Check angles 07:01:51 SkyScan query 07:01:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.905<-15927 Statuses=0008 0009 07:01:51 Msec=3000 True Az=112.995 Ze=-58.905 Az status=0008 Ze status=0009 07:01:52 Check angles 07:01:52 SkyScan query 07:01:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.905<-14527 Statuses=0008 0009 07:01:52 Msec=3750 True Az=112.995 Ze=-37.905 Az status=0008 Ze status=0009 07:01:52 Check angles 07:01:52 SkyScan query 07:01:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.98<-13132 Statuses=0008 0009 07:01:53 Msec=4500 True Az=112.995 Ze=-16.98 Az status=0008 Ze status=0009 07:01:53 Check angles 07:01:53 SkyScan query 07:01:54 SkyScan query done: ret=0 az=112.995<-7533 ze=3.99<-11734 Statuses=0008 0009 07:01:54 Msec=5250 True Az=112.995 Ze=3.99 Az status=0008 Ze status=0009 07:01:54 Check angles 07:01:54 SkyScan query 07:01:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:01:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:01:54 Message to Master queued w/err=0: serial=97821 error=0 07:01:59 Received message from Master: op=Filter serial=97822 07:01:59 Color wheel filter change from 0 to 0 07:01:59 FLIGetFilterPos err=0 currentPosition=0 07:01:59 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:59 Filter is already there-color wheel unchanged 07:02:00 Received message from Master: op=Shutter serial=97823 07:02:00 Shutter LASER close 07:02:00 Received message from Camera: op=State serial=97825 07:02:00 GetSingleValue result=40 Value=cccccccc 07:02:00 SkyScan query 07:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:02:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:00 Parameters OK 07:02:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:00 Set A/D data flow result=40 07:02:00 Set A/D channel type result=40 07:02:00 Set A/D encoding result=40 07:02:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:00 Set channel filter=0.000000e+000 result=40 07:02:00 Config A/D Result=40 07:02:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:00 Get A/D filter: -9.255963e+061 result=40 07:02:00 Get A/D value=-858993460 result=40 07:02:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:00 Parameters OK 07:02:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:00 Set A/D data flow result=40 07:02:00 Set A/D channel type result=40 07:02:00 Set A/D encoding result=40 07:02:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:00 Set channel filter=0.000000e+000 result=40 07:02:00 Config A/D Result=40 07:02:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:00 Get A/D filter: -9.255963e+061 result=40 07:02:00 Get A/D value=-858993460 result=40 07:02:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:02:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:02:00 Aux= 07:02:00 Message to Camera, serial 97825 queued 07:02:37 Received message from Master: op=PointingHead serial=97838 07:02:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:02:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:02:38 Point started: ret=0 07:02:38 point_skyscan result=0 07:02:38 Check angles 07:02:38 SkyScan query 07:02:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:02:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:02:39 Message to Master queued w/err=0: serial=97838 error=0 07:02:44 Received message from Master: op=Filter serial=97839 07:02:44 Color wheel filter change from 0 to 0 07:02:44 FLIGetFilterPos err=0 currentPosition=0 07:02:44 FLIGetStepsRemaining err=0 RemainingSteps=0 07:02:44 Filter is already there-color wheel unchanged 07:02:44 Received message from Master: op=Shutter serial=97840 07:02:44 Shutter LASER close 07:02:44 Received message from Camera: op=State serial=97842 07:02:44 GetSingleValue result=40 Value=cccccccc 07:02:44 SkyScan query 07:02:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:02:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:45 Parameters OK 07:02:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:45 Set A/D data flow result=40 07:02:45 Set A/D channel type result=40 07:02:45 Set A/D encoding result=40 07:02:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:45 Set channel filter=0.000000e+000 result=40 07:02:45 Config A/D Result=40 07:02:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:45 Get A/D filter: -9.255963e+061 result=40 07:02:45 Get A/D value=-858993460 result=40 07:02:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:45 Parameters OK 07:02:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:45 Set A/D data flow result=40 07:02:45 Set A/D channel type result=40 07:02:45 Set A/D encoding result=40 07:02:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:45 Set channel filter=0.000000e+000 result=40 07:02:45 Config A/D Result=40 07:02:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:45 Get A/D filter: -9.255963e+061 result=40 07:02:45 Get A/D value=-858993460 result=40 07:02:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:02:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:02:45 Aux= 07:02:45 Message to Camera, serial 97842 queued 07:03:22 Received message from Master: op=PointingHead serial=97855 07:03:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:03:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:03:22 Point started: ret=0 07:03:22 point_skyscan result=0 07:03:23 Check angles 07:03:23 SkyScan query 07:03:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:03:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:03:23 Message to Master queued w/err=0: serial=97855 error=0 07:03:28 Received message from Master: op=Filter serial=97856 07:03:28 Color wheel filter change from 0 to 0 07:03:28 FLIGetFilterPos err=0 currentPosition=0 07:03:28 FLIGetStepsRemaining err=0 RemainingSteps=0 07:03:28 Filter is already there-color wheel unchanged 07:03:28 Received message from Master: op=Shutter serial=97857 07:03:28 Shutter LASER close 07:03:28 Received message from Camera: op=State serial=97859 07:03:28 GetSingleValue result=40 Value=cccccccc 07:03:28 SkyScan query 07:03:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:03:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:29 Parameters OK 07:03:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:29 Set A/D data flow result=40 07:03:29 Set A/D channel type result=40 07:03:29 Set A/D encoding result=40 07:03:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:29 Set channel filter=0.000000e+000 result=40 07:03:29 Config A/D Result=40 07:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:29 Get A/D filter: -9.255963e+061 result=40 07:03:29 Get A/D value=-858993460 result=40 07:03:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:29 Parameters OK 07:03:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:29 Set A/D data flow result=40 07:03:29 Set A/D channel type result=40 07:03:29 Set A/D encoding result=40 07:03:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:29 Set channel filter=0.000000e+000 result=40 07:03:29 Config A/D Result=40 07:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:29 Get A/D filter: -9.255963e+061 result=40 07:03:29 Get A/D value=-858993460 result=40 07:03:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:03:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:03:29 Aux= 07:03:29 Message to Camera, serial 97859 queued 07:03:38 Received message from Master: op=Identify serial=97860 [UTC 2019-3-4 07:03:50] 07:04:06 Received message from Master: op=PointingHead serial=97875 07:04:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:04:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:04:06 Point started: ret=0 07:04:06 point_skyscan result=0 07:04:07 Check angles 07:04:07 SkyScan query 07:04:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:04:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:04:07 Message to Master queued w/err=0: serial=97875 error=0 07:04:12 Received message from Master: op=Filter serial=97876 07:04:12 Color wheel filter change from 0 to 0 07:04:12 FLIGetFilterPos err=0 currentPosition=0 07:04:12 FLIGetStepsRemaining err=0 RemainingSteps=0 07:04:12 Filter is already there-color wheel unchanged 07:04:13 Received message from Master: op=Shutter serial=97877 07:04:13 Shutter LASER close 07:04:13 Received message from Camera: op=State serial=97879 07:04:13 GetSingleValue result=40 Value=cccccccc 07:04:13 SkyScan query 07:04:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:04:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:13 Parameters OK 07:04:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:13 Set A/D data flow result=40 07:04:13 Set A/D channel type result=40 07:04:13 Set A/D encoding result=40 07:04:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:13 Set channel filter=0.000000e+000 result=40 07:04:13 Config A/D Result=40 07:04:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:13 Get A/D filter: -9.255963e+061 result=40 07:04:13 Get A/D value=-858993460 result=40 07:04:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:13 Parameters OK 07:04:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:13 Set A/D data flow result=40 07:04:13 Set A/D channel type result=40 07:04:13 Set A/D encoding result=40 07:04:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:13 Set channel filter=0.000000e+000 result=40 07:04:13 Config A/D Result=40 07:04:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:13 Get A/D filter: -9.255963e+061 result=40 07:04:13 Get A/D value=-858993460 result=40 07:04:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:04:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:04:13 Aux= 07:04:13 Message to Camera, serial 97879 queued 07:04:50 Received message from Master: op=PointingHead serial=97892 07:04:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:04:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:04:50 Point started: ret=0 07:04:50 point_skyscan result=0 07:04:51 Check angles 07:04:51 SkyScan query 07:04:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.865<-13591 Statuses=0008 0009 07:04:52 Msec=0 True Az=112.995 Ze=-23.865 Az status=0008 Ze status=0009 07:04:52 Check angles 07:04:52 SkyScan query 07:04:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 07:04:53 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 07:04:53 Check angles 07:04:53 SkyScan query 07:04:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.18<-16412 Statuses=0008 0009 07:04:53 Msec=1500 True Az=112.995 Ze=-66.18 Az status=0008 Ze status=0009 07:04:53 Check angles 07:04:53 SkyScan query 07:04:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.135<-17809 Statuses=0008 0009 07:04:54 Msec=2250 True Az=112.995 Ze=-87.135 Az status=0008 Ze status=0009 07:04:54 Check angles 07:04:54 SkyScan query 07:04:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.075<-19205 Statuses=0008 0009 07:04:55 Msec=3000 True Az=112.995 Ze=-108.075 Az status=0008 Ze status=0009 07:04:55 Check angles 07:04:55 SkyScan query 07:04:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.495<-20633 Statuses=0008 0009 07:04:56 Msec=3750 True Az=112.995 Ze=-129.495 Az status=0008 Ze status=0009 07:04:56 Check angles 07:04:56 SkyScan query 07:04:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.45<-22030 Statuses=0008 0009 07:04:56 Msec=4500 True Az=112.995 Ze=-150.45 Az status=0008 Ze status=0009 07:04:56 Check angles 07:04:56 SkyScan query 07:04:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0008 0009 07:04:57 Msec=5250 True Az=112.995 Ze=-171.195 Az status=0008 Ze status=0009 07:04:57 Check angles 07:04:57 SkyScan query 07:04:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:04:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:04:58 Message to Master queued w/err=0: serial=97892 error=0 07:05:03 Received message from Master: op=Filter serial=97893 07:05:03 Color wheel filter change from 0 to 0 07:05:03 FLIGetFilterPos err=0 currentPosition=0 07:05:03 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:03 Filter is already there-color wheel unchanged 07:05:03 Received message from Master: op=Shutter serial=97894 07:05:03 Shutter LASER open 07:05:03 Received message from Camera: op=State serial=97896 07:05:03 GetSingleValue result=40 Value=cccccccc 07:05:03 SkyScan query 07:05:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:05:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:04 Parameters OK 07:05:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:04 Set A/D data flow result=40 07:05:04 Set A/D channel type result=40 07:05:04 Set A/D encoding result=40 07:05:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:04 Set channel filter=0.000000e+000 result=40 07:05:04 Config A/D Result=40 07:05:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:04 Get A/D filter: -9.255963e+061 result=40 07:05:04 Get A/D value=-858993460 result=40 07:05:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:04 Parameters OK 07:05:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:04 Set A/D data flow result=40 07:05:04 Set A/D channel type result=40 07:05:04 Set A/D encoding result=40 07:05:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:04 Set channel filter=0.000000e+000 result=40 07:05:04 Config A/D Result=40 07:05:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:04 Get A/D filter: -9.255963e+061 result=40 07:05:04 Get A/D value=-858993460 result=40 07:05:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:04 Aux= 07:05:04 Message to Camera, serial 97896 queued 07:05:12 Received message from Master: op=Shutter serial=97906 07:05:12 Shutter LASER close 07:05:13 Received message from Master: op=PointingHead serial=97910 07:05:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:05:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:05:13 Point started: ret=0 07:05:13 point_skyscan result=0 07:05:14 Check angles 07:05:14 SkyScan query 07:05:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 07:05:14 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 07:05:15 Check angles 07:05:15 SkyScan query 07:05:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.545<-20103 Statuses=0008 0009 07:05:15 Msec=750 True Az=112.995 Ze=-121.545 Az status=0008 Ze status=0009 07:05:15 Check angles 07:05:15 SkyScan query 07:05:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.635<-18709 Statuses=0008 0009 07:05:16 Msec=1500 True Az=112.995 Ze=-100.635 Az status=0008 Ze status=0009 07:05:16 Check angles 07:05:16 SkyScan query 07:05:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.65<-17310 Statuses=0008 0009 07:05:17 Msec=2250 True Az=112.995 Ze=-79.65 Az status=0008 Ze status=0009 07:05:17 Check angles 07:05:17 SkyScan query 07:05:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 07:05:17 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 07:05:18 Check angles 07:05:18 SkyScan query 07:05:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.74<-14516 Statuses=0008 0009 07:05:18 Msec=3750 True Az=112.995 Ze=-37.74 Az status=0008 Ze status=0009 07:05:18 Check angles 07:05:18 SkyScan query 07:05:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.8<-13120 Statuses=0008 0009 07:05:19 Msec=4500 True Az=112.995 Ze=-16.8 Az status=0008 Ze status=0009 07:05:19 Check angles 07:05:19 SkyScan query 07:05:20 SkyScan query done: ret=0 az=112.995<-7533 ze=4.14<-11724 Statuses=0008 0009 07:05:20 Msec=5250 True Az=112.995 Ze=4.14 Az status=0008 Ze status=0009 07:05:20 Check angles 07:05:20 SkyScan query 07:05:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:05:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:05:20 Message to Master queued w/err=0: serial=97910 error=0 07:05:25 Received message from Master: op=Filter serial=97911 07:05:25 Color wheel filter change from 0 to 0 07:05:25 FLIGetFilterPos err=0 currentPosition=0 07:05:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:25 Filter is already there-color wheel unchanged 07:05:26 Received message from Master: op=Shutter serial=97912 07:05:26 Shutter LASER close 07:05:26 Received message from Camera: op=State serial=97914 07:05:26 GetSingleValue result=40 Value=cccccccc 07:05:26 SkyScan query 07:05:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:05:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:26 Parameters OK 07:05:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:26 Set A/D data flow result=40 07:05:26 Set A/D channel type result=40 07:05:26 Set A/D encoding result=40 07:05:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:26 Set channel filter=0.000000e+000 result=40 07:05:26 Config A/D Result=40 07:05:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:26 Get A/D filter: -9.255963e+061 result=40 07:05:26 Get A/D value=-858993460 result=40 07:05:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:26 Parameters OK 07:05:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:26 Set A/D data flow result=40 07:05:26 Set A/D channel type result=40 07:05:26 Set A/D encoding result=40 07:05:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:26 Set channel filter=0.000000e+000 result=40 07:05:26 Config A/D Result=40 07:05:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:26 Get A/D filter: -9.255963e+061 result=40 07:05:26 Get A/D value=-858993460 result=40 07:05:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:26 Aux= 07:05:26 Message to Camera, serial 97914 queued 07:06:03 Received message from Master: op=PointingHead serial=97927 07:06:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:06:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:06:04 Point started: ret=0 07:06:04 point_skyscan result=0 07:06:04 Check angles 07:06:04 SkyScan query 07:06:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:06:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:06:05 Message to Master queued w/err=0: serial=97927 error=0 07:06:10 Received message from Master: op=Filter serial=97928 07:06:10 Color wheel filter change from 0 to 0 07:06:10 FLIGetFilterPos err=0 currentPosition=0 07:06:10 FLIGetStepsRemaining err=0 RemainingSteps=0 07:06:10 Filter is already there-color wheel unchanged 07:06:10 Received message from Master: op=Shutter serial=97929 07:06:10 Shutter LASER close 07:06:10 Received message from Camera: op=State serial=97931 07:06:10 GetSingleValue result=40 Value=cccccccc 07:06:10 SkyScan query 07:06:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:06:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:11 Parameters OK 07:06:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:11 Set A/D data flow result=40 07:06:11 Set A/D channel type result=40 07:06:11 Set A/D encoding result=40 07:06:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:11 Set channel filter=0.000000e+000 result=40 07:06:11 Config A/D Result=40 07:06:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:11 Get A/D filter: -9.255963e+061 result=40 07:06:11 Get A/D value=-858993460 result=40 07:06:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:11 Parameters OK 07:06:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:11 Set A/D data flow result=40 07:06:11 Set A/D channel type result=40 07:06:11 Set A/D encoding result=40 07:06:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:11 Set channel filter=0.000000e+000 result=40 07:06:11 Config A/D Result=40 07:06:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:11 Get A/D filter: -9.255963e+061 result=40 07:06:11 Get A/D value=-858993460 result=40 07:06:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:06:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:06:11 Aux= 07:06:11 Message to Camera, serial 97931 queued 07:06:48 Received message from Master: op=PointingHead serial=97944 07:06:48 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:06:48 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:06:48 Point started: ret=0 07:06:48 point_skyscan result=0 07:06:49 Check angles 07:06:49 SkyScan query 07:06:49 SkyScan query done: ret=0 az=135.66<-9044 ze=-6.51<-12434 Statuses=0009 0008 07:06:49 Msec=0 True Az=135.66 Ze=-6.51 Az status=0009 Ze status=0008 07:06:49 Check angles 07:06:49 SkyScan query 07:06:50 SkyScan query done: ret=0 az=153.15<-10210 ze=-6.495<-12433 Statuses=0009 0008 07:06:50 Msec=750 True Az=153.15 Ze=-6.495 Az status=0009 Ze status=0008 07:06:50 Check angles 07:06:50 SkyScan query 07:06:51 SkyScan query done: ret=0 az=170.7<-11380 ze=-6.495<-12433 Statuses=0009 0008 07:06:51 Msec=1500 True Az=170.7 Ze=-6.495 Az status=0009 Ze status=0008 07:06:51 Check angles 07:06:51 SkyScan query 07:06:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:06:52 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:06:52 Message to Master queued w/err=0: serial=97944 error=0 07:06:57 Received message from Master: op=Filter serial=97945 07:06:57 Color wheel filter change from 0 to 0 07:06:57 FLIGetFilterPos err=0 currentPosition=0 07:06:57 FLIGetStepsRemaining err=0 RemainingSteps=0 07:06:57 Filter is already there-color wheel unchanged 07:06:57 Received message from Master: op=Shutter serial=97946 07:06:57 Shutter LASER close 07:06:57 Received message from Camera: op=State serial=97948 07:06:57 GetSingleValue result=40 Value=cccccccc 07:06:57 SkyScan query 07:06:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:06:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:57 Parameters OK 07:06:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:57 Set A/D data flow result=40 07:06:57 Set A/D channel type result=40 07:06:57 Set A/D encoding result=40 07:06:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:57 Set channel filter=0.000000e+000 result=40 07:06:57 Config A/D Result=40 07:06:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:57 Get A/D filter: -9.255963e+061 result=40 07:06:57 Get A/D value=-858993460 result=40 07:06:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:57 Parameters OK 07:06:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:57 Set A/D data flow result=40 07:06:57 Set A/D channel type result=40 07:06:57 Set A/D encoding result=40 07:06:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:57 Set channel filter=0.000000e+000 result=40 07:06:57 Config A/D Result=40 07:06:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:57 Get A/D filter: -9.255963e+061 result=40 07:06:57 Get A/D value=-858993460 result=40 07:06:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:06:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:06:57 Aux= 07:06:57 Message to Camera, serial 97948 queued 07:07:34 Received message from Master: op=PointingHead serial=97961 07:07:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:07:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:07:35 Point started: ret=0 07:07:35 point_skyscan result=0 07:07:35 Check angles 07:07:35 SkyScan query 07:07:36 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 07:07:36 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 07:07:36 Check angles 07:07:36 SkyScan query 07:07:37 SkyScan query done: ret=0 az=135.69<-9046 ze=6.495<-11567 Statuses=0009 0008 07:07:37 Msec=750 True Az=135.69 Ze=6.495 Az status=0009 Ze status=0008 07:07:37 Check angles 07:07:37 SkyScan query 07:07:37 SkyScan query done: ret=0 az=117.855<-7857 ze=6.495<-11567 Statuses=0009 0008 07:07:37 Msec=1500 True Az=117.855 Ze=6.495 Az status=0009 Ze status=0008 07:07:38 Check angles 07:07:38 SkyScan query 07:07:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:07:38 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:07:38 Message to Master queued w/err=0: serial=97961 error=0 07:07:43 Received message from Master: op=Filter serial=97962 07:07:43 Color wheel filter change from 0 to 0 07:07:43 FLIGetFilterPos err=0 currentPosition=0 07:07:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:07:43 Filter is already there-color wheel unchanged 07:07:43 Received message from Master: op=Shutter serial=97963 07:07:43 Shutter LASER close 07:07:43 Received message from Camera: op=State serial=97965 07:07:43 GetSingleValue result=40 Value=cccccccc 07:07:43 SkyScan query 07:07:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:07:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:44 Parameters OK 07:07:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:44 Set A/D data flow result=40 07:07:44 Set A/D channel type result=40 07:07:44 Set A/D encoding result=40 07:07:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:44 Set channel filter=0.000000e+000 result=40 07:07:44 Config A/D Result=40 07:07:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:44 Get A/D filter: -9.255963e+061 result=40 07:07:44 Get A/D value=-858993460 result=40 07:07:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:44 Parameters OK 07:07:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:44 Set A/D data flow result=40 07:07:44 Set A/D channel type result=40 07:07:44 Set A/D encoding result=40 07:07:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:44 Set channel filter=0.000000e+000 result=40 07:07:44 Config A/D Result=40 07:07:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:44 Get A/D filter: -9.255963e+061 result=40 07:07:44 Get A/D value=-858993460 result=40 07:07:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:07:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:07:44 Aux= 07:07:44 Message to Camera, serial 97965 queued 07:08:21 Received message from Master: op=PointingHead serial=97978 07:08:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:08:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:08:21 Point started: ret=0 07:08:21 point_skyscan result=0 07:08:22 Check angles 07:08:22 SkyScan query 07:08:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 07:08:22 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 07:08:23 Check angles 07:08:23 SkyScan query 07:08:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 07:08:23 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 07:08:23 Check angles 07:08:23 SkyScan query 07:08:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.28<-16352 Statuses=0008 0009 07:08:24 Msec=1500 True Az=112.995 Ze=-65.28 Az status=0008 Ze status=0009 07:08:24 Check angles 07:08:24 SkyScan query 07:08:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.64<-17776 Statuses=0008 0009 07:08:25 Msec=2250 True Az=112.995 Ze=-86.64 Az status=0008 Ze status=0009 07:08:25 Check angles 07:08:25 SkyScan query 07:08:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 07:08:25 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 07:08:26 Check angles 07:08:26 SkyScan query 07:08:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.535<-20569 Statuses=0008 0009 07:08:26 Msec=3750 True Az=112.995 Ze=-128.535 Az status=0008 Ze status=0009 07:08:26 Check angles 07:08:26 SkyScan query 07:08:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.505<-21967 Statuses=0008 0009 07:08:27 Msec=4500 True Az=112.995 Ze=-149.505 Az status=0008 Ze status=0009 07:08:27 Check angles 07:08:27 SkyScan query 07:08:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.43<-23362 Statuses=0008 0009 07:08:28 Msec=5250 True Az=112.995 Ze=-170.43 Az status=0008 Ze status=0009 07:08:28 Check angles 07:08:28 SkyScan query 07:08:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:08:28 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:08:28 Message to Master queued w/err=0: serial=97978 error=0 07:08:33 Received message from Master: op=Filter serial=97979 07:08:33 Color wheel filter change from 0 to 0 07:08:33 FLIGetFilterPos err=0 currentPosition=0 07:08:33 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:33 Filter is already there-color wheel unchanged 07:08:34 Received message from Master: op=Shutter serial=97980 07:08:34 Shutter LASER open 07:08:34 Received message from Camera: op=State serial=97982 07:08:34 GetSingleValue result=40 Value=cccccccc 07:08:34 SkyScan query 07:08:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:08:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:34 Parameters OK 07:08:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:34 Set A/D data flow result=40 07:08:34 Set A/D channel type result=40 07:08:34 Set A/D encoding result=40 07:08:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:34 Set channel filter=0.000000e+000 result=40 07:08:34 Config A/D Result=40 07:08:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:34 Get A/D filter: -9.255963e+061 result=40 07:08:34 Get A/D value=-858993460 result=40 07:08:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:34 Parameters OK 07:08:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:34 Set A/D data flow result=40 07:08:34 Set A/D channel type result=40 07:08:34 Set A/D encoding result=40 07:08:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:34 Set channel filter=0.000000e+000 result=40 07:08:34 Config A/D Result=40 07:08:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:34 Get A/D filter: -9.255963e+061 result=40 07:08:34 Get A/D value=-858993460 result=40 07:08:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:34 Aux= 07:08:34 Message to Camera, serial 97982 queued 07:08:43 Received message from Master: op=Shutter serial=97992 07:08:43 Shutter LASER close 07:08:43 Received message from Master: op=PointingHead serial=97996 07:08:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:08:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:08:44 Point started: ret=0 07:08:44 point_skyscan result=0 07:08:44 Check angles 07:08:44 SkyScan query 07:08:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.77<-21518 Statuses=0008 0009 07:08:45 Msec=0 True Az=112.995 Ze=-142.77 Az status=0008 Ze status=0009 07:08:45 Check angles 07:08:45 SkyScan query 07:08:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.785<-20119 Statuses=0008 0009 07:08:46 Msec=750 True Az=112.995 Ze=-121.785 Az status=0008 Ze status=0009 07:08:46 Check angles 07:08:46 SkyScan query 07:08:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 07:08:46 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 07:08:47 Check angles 07:08:47 SkyScan query 07:08:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.905<-17327 Statuses=0008 0009 07:08:47 Msec=2250 True Az=112.995 Ze=-79.905 Az status=0008 Ze status=0009 07:08:47 Check angles 07:08:47 SkyScan query 07:08:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.515<-15901 Statuses=0008 0009 07:08:48 Msec=3000 True Az=112.995 Ze=-58.515 Az status=0008 Ze status=0009 07:08:48 Check angles 07:08:48 SkyScan query 07:08:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.56<-14504 Statuses=0008 0009 07:08:49 Msec=3750 True Az=112.995 Ze=-37.56 Az status=0008 Ze status=0009 07:08:49 Check angles 07:08:49 SkyScan query 07:08:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.605<-13107 Statuses=0008 0009 07:08:49 Msec=4500 True Az=112.995 Ze=-16.605 Az status=0008 Ze status=0009 07:08:50 Check angles 07:08:50 SkyScan query 07:08:50 SkyScan query done: ret=0 az=113.01<-7534 ze=4.29<-11714 Statuses=0008 0009 07:08:50 Msec=5250 True Az=113.01 Ze=4.29 Az status=0008 Ze status=0009 07:08:50 Check angles 07:08:50 SkyScan query 07:08:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:08:51 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:08:51 Message to Master queued w/err=0: serial=97996 error=0 07:08:56 Received message from Master: op=Filter serial=97997 07:08:56 Color wheel filter change from 0 to 0 07:08:56 FLIGetFilterPos err=0 currentPosition=0 07:08:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:56 Filter is already there-color wheel unchanged 07:08:56 Received message from Master: op=Shutter serial=97998 07:08:56 Shutter LASER close 07:08:56 Received message from Camera: op=State serial=98000 07:08:56 GetSingleValue result=40 Value=cccccccc 07:08:56 SkyScan query 07:08:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:08:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:57 Parameters OK 07:08:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:57 Set A/D data flow result=40 07:08:57 Set A/D channel type result=40 07:08:57 Set A/D encoding result=40 07:08:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:57 Set channel filter=0.000000e+000 result=40 07:08:57 Config A/D Result=40 07:08:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:57 Get A/D filter: -9.255963e+061 result=40 07:08:57 Get A/D value=-858993460 result=40 07:08:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:57 Parameters OK 07:08:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:57 Set A/D data flow result=40 07:08:57 Set A/D channel type result=40 07:08:57 Set A/D encoding result=40 07:08:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:57 Set channel filter=0.000000e+000 result=40 07:08:57 Config A/D Result=40 07:08:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:57 Get A/D filter: -9.255963e+061 result=40 07:08:57 Get A/D value=-858993460 result=40 07:08:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:57 Aux= 07:08:57 Message to Camera, serial 98000 queued 07:09:34 Received message from Master: op=PointingHead serial=98013 07:09:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:09:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:09:34 Point started: ret=0 07:09:34 point_skyscan result=0 07:09:35 Check angles 07:09:35 SkyScan query 07:09:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:09:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:09:35 Message to Master queued w/err=0: serial=98013 error=0 07:09:40 Received message from Master: op=Filter serial=98014 07:09:40 Color wheel filter change from 0 to 0 07:09:40 FLIGetFilterPos err=0 currentPosition=0 07:09:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:09:40 Filter is already there-color wheel unchanged 07:09:41 Received message from Master: op=Shutter serial=98015 07:09:41 Shutter LASER close 07:09:41 Received message from Camera: op=State serial=98017 07:09:41 GetSingleValue result=40 Value=cccccccc 07:09:41 SkyScan query 07:09:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:09:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:41 Parameters OK 07:09:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:41 Set A/D data flow result=40 07:09:41 Set A/D channel type result=40 07:09:41 Set A/D encoding result=40 07:09:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:41 Set channel filter=0.000000e+000 result=40 07:09:41 Config A/D Result=40 07:09:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:41 Get A/D filter: -9.255963e+061 result=40 07:09:41 Get A/D value=-858993460 result=40 07:09:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:41 Parameters OK 07:09:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:41 Set A/D data flow result=40 07:09:41 Set A/D channel type result=40 07:09:41 Set A/D encoding result=40 07:09:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:41 Set channel filter=0.000000e+000 result=40 07:09:41 Config A/D Result=40 07:09:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:41 Get A/D filter: -9.255963e+061 result=40 07:09:41 Get A/D value=-858993460 result=40 07:09:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:09:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:09:41 Aux= 07:09:41 Message to Camera, serial 98017 queued 07:10:18 Received message from Master: op=PointingHead serial=98030 07:10:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:10:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:10:18 Point started: ret=0 07:10:18 point_skyscan result=0 07:10:19 Check angles 07:10:19 SkyScan query 07:10:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:10:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:10:20 Message to Master queued w/err=0: serial=98030 error=0 07:10:25 Received message from Master: op=Filter serial=98031 07:10:25 Color wheel filter change from 0 to 0 07:10:25 FLIGetFilterPos err=0 currentPosition=0 07:10:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:10:25 Filter is already there-color wheel unchanged 07:10:25 Received message from Master: op=Shutter serial=98032 07:10:25 Shutter LASER close 07:10:25 Received message from Camera: op=State serial=98034 07:10:25 GetSingleValue result=40 Value=cccccccc 07:10:25 SkyScan query 07:10:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:10:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:25 Parameters OK 07:10:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:25 Set A/D data flow result=40 07:10:25 Set A/D channel type result=40 07:10:25 Set A/D encoding result=40 07:10:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:25 Set channel filter=0.000000e+000 result=40 07:10:25 Config A/D Result=40 07:10:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:25 Get A/D filter: -9.255963e+061 result=40 07:10:25 Get A/D value=-858993460 result=40 07:10:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:25 Parameters OK 07:10:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:25 Set A/D data flow result=40 07:10:25 Set A/D channel type result=40 07:10:25 Set A/D encoding result=40 07:10:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:25 Set channel filter=0.000000e+000 result=40 07:10:25 Config A/D Result=40 07:10:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:25 Get A/D filter: -9.255963e+061 result=40 07:10:25 Get A/D value=-858993460 result=40 07:10:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:10:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:10:25 Aux= 07:10:25 Message to Camera, serial 98034 queued 07:11:02 Received message from Master: op=PointingHead serial=98047 07:11:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:11:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:11:03 Point started: ret=0 07:11:03 point_skyscan result=0 07:11:03 Check angles 07:11:03 SkyScan query 07:11:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:11:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:11:04 Message to Master queued w/err=0: serial=98047 error=0 07:11:09 Received message from Master: op=Filter serial=98048 07:11:09 Color wheel filter change from 0 to 0 07:11:09 FLIGetFilterPos err=0 currentPosition=0 07:11:09 FLIGetStepsRemaining err=0 RemainingSteps=0 07:11:09 Filter is already there-color wheel unchanged 07:11:09 Received message from Master: op=Shutter serial=98049 07:11:09 Shutter LASER close 07:11:09 Received message from Camera: op=State serial=98051 07:11:09 GetSingleValue result=40 Value=cccccccc 07:11:09 SkyScan query 07:11:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:11:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:10 Parameters OK 07:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:10 Set A/D data flow result=40 07:11:10 Set A/D channel type result=40 07:11:10 Set A/D encoding result=40 07:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:10 Set channel filter=0.000000e+000 result=40 07:11:10 Config A/D Result=40 07:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:10 Get A/D filter: -9.255963e+061 result=40 07:11:10 Get A/D value=-858993460 result=40 07:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:10 Parameters OK 07:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:10 Set A/D data flow result=40 07:11:10 Set A/D channel type result=40 07:11:10 Set A/D encoding result=40 07:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:10 Set channel filter=0.000000e+000 result=40 07:11:10 Config A/D Result=40 07:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:10 Get A/D filter: -9.255963e+061 result=40 07:11:10 Get A/D value=-858993460 result=40 07:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:11:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:11:10 Aux= 07:11:10 Message to Camera, serial 98051 queued 07:11:47 Received message from Master: op=PointingHead serial=98064 07:11:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:11:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:11:47 Point started: ret=0 07:11:47 point_skyscan result=0 07:11:48 Check angles 07:11:48 SkyScan query 07:11:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.835<-13589 Statuses=0008 0009 07:11:48 Msec=0 True Az=112.995 Ze=-23.835 Az status=0008 Ze status=0009 07:11:49 Check angles 07:11:49 SkyScan query 07:11:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.76<-14984 Statuses=0008 0009 07:11:49 Msec=750 True Az=112.995 Ze=-44.76 Az status=0008 Ze status=0009 07:11:49 Check angles 07:11:49 SkyScan query 07:11:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.715<-16381 Statuses=0008 0009 07:11:50 Msec=1500 True Az=112.995 Ze=-65.715 Az status=0008 Ze status=0009 07:11:50 Check angles 07:11:50 SkyScan query 07:11:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.105<-17807 Statuses=0008 0009 07:11:51 Msec=2250 True Az=112.995 Ze=-87.105 Az status=0008 Ze status=0009 07:11:51 Check angles 07:11:51 SkyScan query 07:11:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.06<-19204 Statuses=0008 0009 07:11:51 Msec=3000 True Az=112.995 Ze=-108.06 Az status=0008 Ze status=0009 07:11:52 Check angles 07:11:52 SkyScan query 07:11:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.015<-20601 Statuses=0008 0009 07:11:52 Msec=3750 True Az=112.995 Ze=-129.015 Az status=0008 Ze status=0009 07:11:52 Check angles 07:11:52 SkyScan query 07:11:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.435<-22029 Statuses=0008 0009 07:11:53 Msec=4500 True Az=112.995 Ze=-150.435 Az status=0008 Ze status=0009 07:11:53 Check angles 07:11:53 SkyScan query 07:11:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.495<-23433 Statuses=0008 0009 07:11:54 Msec=5250 True Az=112.995 Ze=-171.495 Az status=0008 Ze status=0009 07:11:54 Check angles 07:11:54 SkyScan query 07:11:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:11:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:11:54 Message to Master queued w/err=0: serial=98064 error=0 07:11:59 Received message from Master: op=Filter serial=98065 07:11:59 Color wheel filter change from 0 to 0 07:11:59 FLIGetFilterPos err=0 currentPosition=0 07:11:59 FLIGetStepsRemaining err=0 RemainingSteps=0 07:11:59 Filter is already there-color wheel unchanged 07:12:00 Received message from Master: op=Shutter serial=98066 07:12:00 Shutter LASER open 07:12:00 Received message from Camera: op=State serial=98068 07:12:00 GetSingleValue result=40 Value=cccccccc 07:12:00 SkyScan query 07:12:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:12:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:00 Parameters OK 07:12:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:00 Set A/D data flow result=40 07:12:00 Set A/D channel type result=40 07:12:00 Set A/D encoding result=40 07:12:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:00 Set channel filter=0.000000e+000 result=40 07:12:00 Config A/D Result=40 07:12:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:00 Get A/D filter: -9.255963e+061 result=40 07:12:00 Get A/D value=-858993460 result=40 07:12:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:00 Parameters OK 07:12:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:00 Set A/D data flow result=40 07:12:00 Set A/D channel type result=40 07:12:00 Set A/D encoding result=40 07:12:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:00 Set channel filter=0.000000e+000 result=40 07:12:00 Config A/D Result=40 07:12:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:00 Get A/D filter: -9.255963e+061 result=40 07:12:00 Get A/D value=-858993460 result=40 07:12:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:00 Aux= 07:12:00 Message to Camera, serial 98068 queued 07:12:09 Received message from Master: op=Shutter serial=98078 07:12:09 Shutter LASER close 07:12:09 Received message from Master: op=PointingHead serial=98082 07:12:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:12:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:12:10 Point started: ret=0 07:12:10 point_skyscan result=0 07:12:10 Check angles 07:12:10 SkyScan query 07:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 07:12:11 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 07:12:11 Check angles 07:12:11 SkyScan query 07:12:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.815<-20121 Statuses=0008 0009 07:12:12 Msec=750 True Az=112.995 Ze=-121.815 Az status=0008 Ze status=0009 07:12:12 Check angles 07:12:12 SkyScan query 07:12:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.905<-18727 Statuses=0008 0009 07:12:13 Msec=1500 True Az=112.995 Ze=-100.905 Az status=0008 Ze status=0009 07:12:13 Check angles 07:12:13 SkyScan query 07:12:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.935<-17329 Statuses=0008 0009 07:12:13 Msec=2250 True Az=112.995 Ze=-79.935 Az status=0008 Ze status=0009 07:12:13 Check angles 07:12:13 SkyScan query 07:12:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.01<-15934 Statuses=0008 0009 07:12:14 Msec=3000 True Az=112.995 Ze=-59.01 Az status=0008 Ze status=0009 07:12:14 Check angles 07:12:14 SkyScan query 07:12:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.995<-14533 Statuses=0008 0009 07:12:15 Msec=3750 True Az=112.995 Ze=-37.995 Az status=0008 Ze status=0009 07:12:15 Check angles 07:12:15 SkyScan query 07:12:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.085<-13139 Statuses=0008 0009 07:12:16 Msec=4500 True Az=112.995 Ze=-17.085 Az status=0008 Ze status=0009 07:12:16 Check angles 07:12:16 SkyScan query 07:12:16 SkyScan query done: ret=0 az=112.995<-7533 ze=3.9<-11740 Statuses=0008 0009 07:12:16 Msec=5250 True Az=112.995 Ze=3.9 Az status=0008 Ze status=0009 07:12:16 Check angles 07:12:16 SkyScan query 07:12:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:12:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:12:17 Message to Master queued w/err=0: serial=98082 error=0 07:12:22 Received message from Master: op=Filter serial=98083 07:12:22 Color wheel filter change from 0 to 0 07:12:22 FLIGetFilterPos err=0 currentPosition=0 07:12:22 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:22 Filter is already there-color wheel unchanged 07:12:22 Received message from Master: op=Shutter serial=98084 07:12:22 Shutter LASER close 07:12:22 Received message from Camera: op=State serial=98086 07:12:22 GetSingleValue result=40 Value=cccccccc 07:12:22 SkyScan query 07:12:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:12:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:23 Parameters OK 07:12:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:23 Set A/D data flow result=40 07:12:23 Set A/D channel type result=40 07:12:23 Set A/D encoding result=40 07:12:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:23 Set channel filter=0.000000e+000 result=40 07:12:23 Config A/D Result=40 07:12:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:23 Get A/D filter: -9.255963e+061 result=40 07:12:23 Get A/D value=-858993460 result=40 07:12:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:23 Parameters OK 07:12:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:23 Set A/D data flow result=40 07:12:23 Set A/D channel type result=40 07:12:23 Set A/D encoding result=40 07:12:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:23 Set channel filter=0.000000e+000 result=40 07:12:23 Config A/D Result=40 07:12:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:23 Get A/D filter: -9.255963e+061 result=40 07:12:23 Get A/D value=-858993460 result=40 07:12:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:23 Aux= 07:12:23 Message to Camera, serial 98086 queued 07:13:00 Received message from Master: op=PointingHead serial=98099 07:13:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:13:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:13:00 Point started: ret=0 07:13:00 point_skyscan result=0 07:13:01 Check angles 07:13:01 SkyScan query 07:13:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:13:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:13:01 Message to Master queued w/err=0: serial=98099 error=0 07:13:06 Received message from Master: op=Filter serial=98100 07:13:06 Color wheel filter change from 0 to 0 07:13:06 FLIGetFilterPos err=0 currentPosition=0 07:13:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:13:06 Filter is already there-color wheel unchanged 07:13:07 Received message from Master: op=Shutter serial=98101 07:13:07 Shutter LASER close 07:13:07 Received message from Camera: op=State serial=98103 07:13:07 GetSingleValue result=40 Value=cccccccc 07:13:07 SkyScan query 07:13:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:13:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:07 Parameters OK 07:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:07 Set A/D data flow result=40 07:13:07 Set A/D channel type result=40 07:13:07 Set A/D encoding result=40 07:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:07 Set channel filter=0.000000e+000 result=40 07:13:07 Config A/D Result=40 07:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:07 Get A/D filter: -9.255963e+061 result=40 07:13:07 Get A/D value=-858993460 result=40 07:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:07 Parameters OK 07:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:07 Set A/D data flow result=40 07:13:07 Set A/D channel type result=40 07:13:07 Set A/D encoding result=40 07:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:07 Set channel filter=0.000000e+000 result=40 07:13:07 Config A/D Result=40 07:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:07 Get A/D filter: -9.255963e+061 result=40 07:13:07 Get A/D value=-858993460 result=40 07:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:13:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:13:07 Aux= 07:13:07 Message to Camera, serial 98103 queued 07:13:44 Received message from Master: op=PointingHead serial=98116 07:13:44 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:13:44 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:13:44 Point started: ret=0 07:13:44 point_skyscan result=0 07:13:45 Check angles 07:13:45 SkyScan query 07:13:46 SkyScan query done: ret=0 az=135.645<-9043 ze=-6.51<-12434 Statuses=0009 0008 07:13:46 Msec=0 True Az=135.645 Ze=-6.51 Az status=0009 Ze status=0008 07:13:46 Check angles 07:13:46 SkyScan query 07:13:46 SkyScan query done: ret=0 az=153.585<-10239 ze=-6.51<-12434 Statuses=0009 0008 07:13:46 Msec=750 True Az=153.585 Ze=-6.51 Az status=0009 Ze status=0008 07:13:47 Check angles 07:13:47 SkyScan query 07:13:47 SkyScan query done: ret=0 az=171<-11400 ze=-6.495<-12433 Statuses=0009 0008 07:13:47 Msec=1500 True Az=171 Ze=-6.495 Az status=0009 Ze status=0008 07:13:47 Check angles 07:13:47 SkyScan query 07:13:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:13:48 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:13:48 Message to Master queued w/err=0: serial=98116 error=0 07:13:53 Received message from Master: op=Filter serial=98117 07:13:53 Color wheel filter change from 0 to 0 07:13:53 FLIGetFilterPos err=0 currentPosition=0 07:13:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:13:53 Filter is already there-color wheel unchanged 07:13:53 Received message from Master: op=Shutter serial=98118 07:13:53 Shutter LASER close 07:13:53 Received message from Camera: op=State serial=98120 07:13:53 GetSingleValue result=40 Value=cccccccc 07:13:53 SkyScan query 07:13:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:13:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:54 Parameters OK 07:13:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:54 Set A/D data flow result=40 07:13:54 Set A/D channel type result=40 07:13:54 Set A/D encoding result=40 07:13:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:54 Set channel filter=0.000000e+000 result=40 07:13:54 Config A/D Result=40 07:13:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:54 Get A/D filter: -9.255963e+061 result=40 07:13:54 Get A/D value=-858993460 result=40 07:13:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:54 Parameters OK 07:13:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:54 Set A/D data flow result=40 07:13:54 Set A/D channel type result=40 07:13:54 Set A/D encoding result=40 07:13:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:54 Set channel filter=0.000000e+000 result=40 07:13:54 Config A/D Result=40 07:13:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:54 Get A/D filter: -9.255963e+061 result=40 07:13:54 Get A/D value=-858993460 result=40 07:13:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:13:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:13:54 Aux= 07:13:54 Message to Camera, serial 98120 queued [UTC 2019-3-4 07:14:31] 07:14:31 Received message from Master: op=PointingHead serial=98133 07:14:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:14:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:14:31 Point started: ret=0 07:14:31 point_skyscan result=0 07:14:32 Check angles 07:14:32 SkyScan query 07:14:32 SkyScan query done: ret=0 az=152.655<-10177 ze=6.51<-11566 Statuses=0009 0008 07:14:32 Msec=0 True Az=152.655 Ze=6.51 Az status=0009 Ze status=0008 07:14:33 Check angles 07:14:33 SkyScan query 07:14:33 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 07:14:33 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 07:14:33 Check angles 07:14:33 SkyScan query 07:14:34 SkyScan query done: ret=0 az=117.69<-7846 ze=6.495<-11567 Statuses=0009 0008 07:14:34 Msec=1500 True Az=117.69 Ze=6.495 Az status=0009 Ze status=0008 07:14:34 Check angles 07:14:34 SkyScan query 07:14:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:14:35 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:14:35 Message to Master queued w/err=0: serial=98133 error=0 07:14:40 Received message from Master: op=Filter serial=98134 07:14:40 Color wheel filter change from 0 to 0 07:14:40 FLIGetFilterPos err=0 currentPosition=0 07:14:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:14:40 Filter is already there-color wheel unchanged 07:14:40 Received message from Master: op=Shutter serial=98135 07:14:40 Shutter LASER close 07:14:40 Received message from Camera: op=State serial=98137 07:14:40 GetSingleValue result=40 Value=cccccccc 07:14:40 SkyScan query 07:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:14:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:40 Parameters OK 07:14:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:40 Set A/D data flow result=40 07:14:40 Set A/D channel type result=40 07:14:40 Set A/D encoding result=40 07:14:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:40 Set channel filter=0.000000e+000 result=40 07:14:40 Config A/D Result=40 07:14:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:40 Get A/D filter: -9.255963e+061 result=40 07:14:40 Get A/D value=-858993460 result=40 07:14:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:40 Parameters OK 07:14:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:40 Set A/D data flow result=40 07:14:40 Set A/D channel type result=40 07:14:40 Set A/D encoding result=40 07:14:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:40 Set channel filter=0.000000e+000 result=40 07:14:40 Config A/D Result=40 07:14:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:40 Get A/D filter: -9.255963e+061 result=40 07:14:40 Get A/D value=-858993460 result=40 07:14:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:14:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:14:40 Aux= 07:14:40 Message to Camera, serial 98137 queued 07:15:17 Received message from Master: op=PointingHead serial=98150 07:15:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:15:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:15:18 Point started: ret=0 07:15:18 point_skyscan result=0 07:15:18 Check angles 07:15:18 SkyScan query 07:15:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.745<-13583 Statuses=0008 0009 07:15:19 Msec=0 True Az=112.995 Ze=-23.745 Az status=0008 Ze status=0009 07:15:19 Check angles 07:15:19 SkyScan query 07:15:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.67<-14978 Statuses=0008 0009 07:15:20 Msec=750 True Az=112.995 Ze=-44.67 Az status=0008 Ze status=0009 07:15:20 Check angles 07:15:20 SkyScan query 07:15:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.64<-16376 Statuses=0008 0009 07:15:20 Msec=1500 True Az=112.995 Ze=-65.64 Az status=0008 Ze status=0009 07:15:21 Check angles 07:15:21 SkyScan query 07:15:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.015<-17801 Statuses=0008 0009 07:15:21 Msec=2250 True Az=112.995 Ze=-87.015 Az status=0008 Ze status=0009 07:15:21 Check angles 07:15:21 SkyScan query 07:15:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.985<-19199 Statuses=0008 0009 07:15:22 Msec=3000 True Az=112.995 Ze=-107.985 Az status=0008 Ze status=0009 07:15:22 Check angles 07:15:22 SkyScan query 07:15:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.925<-20595 Statuses=0008 0009 07:15:23 Msec=3750 True Az=112.995 Ze=-128.925 Az status=0008 Ze status=0009 07:15:23 Check angles 07:15:23 SkyScan query 07:15:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.345<-22023 Statuses=0008 0009 07:15:23 Msec=4500 True Az=112.995 Ze=-150.345 Az status=0008 Ze status=0009 07:15:24 Check angles 07:15:24 SkyScan query 07:15:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.12<-23408 Statuses=0008 0009 07:15:24 Msec=5250 True Az=112.995 Ze=-171.12 Az status=0008 Ze status=0009 07:15:24 Check angles 07:15:24 SkyScan query 07:15:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:15:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:15:25 Message to Master queued w/err=0: serial=98150 error=0 07:15:30 Received message from Master: op=Filter serial=98151 07:15:30 Color wheel filter change from 0 to 0 07:15:30 FLIGetFilterPos err=0 currentPosition=0 07:15:30 FLIGetStepsRemaining err=0 RemainingSteps=0 07:15:30 Filter is already there-color wheel unchanged 07:15:30 Received message from Master: op=Shutter serial=98152 07:15:30 Shutter LASER open 07:15:30 Received message from Camera: op=State serial=98154 07:15:30 GetSingleValue result=40 Value=cccccccc 07:15:30 SkyScan query 07:15:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:15:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:31 Parameters OK 07:15:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:31 Set A/D data flow result=40 07:15:31 Set A/D channel type result=40 07:15:31 Set A/D encoding result=40 07:15:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:31 Set channel filter=0.000000e+000 result=40 07:15:31 Config A/D Result=40 07:15:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:31 Get A/D filter: -9.255963e+061 result=40 07:15:31 Get A/D value=-858993460 result=40 07:15:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:31 Parameters OK 07:15:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:31 Set A/D data flow result=40 07:15:31 Set A/D channel type result=40 07:15:31 Set A/D encoding result=40 07:15:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:31 Set channel filter=0.000000e+000 result=40 07:15:31 Config A/D Result=40 07:15:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:31 Get A/D filter: -9.255963e+061 result=40 07:15:31 Get A/D value=-858993460 result=40 07:15:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:15:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:15:31 Aux= 07:15:31 Message to Camera, serial 98154 queued 07:15:39 Received message from Master: op=Shutter serial=98164 07:15:39 Shutter LASER close 07:15:40 Received message from Master: op=PointingHead serial=98168 07:15:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:15:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:15:40 Point started: ret=0 07:15:40 point_skyscan result=0 07:15:41 Check angles 07:15:41 SkyScan query 07:15:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 07:15:41 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 07:15:42 Check angles 07:15:42 SkyScan query 07:15:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.175<-20145 Statuses=0008 0009 07:15:42 Msec=750 True Az=112.995 Ze=-122.175 Az status=0008 Ze status=0009 07:15:42 Check angles 07:15:42 SkyScan query 07:15:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.785<-18719 Statuses=0008 0009 07:15:43 Msec=1500 True Az=112.995 Ze=-100.785 Az status=0008 Ze status=0009 07:15:43 Check angles 07:15:43 SkyScan query 07:15:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.815<-17321 Statuses=0008 0009 07:15:44 Msec=2250 True Az=112.995 Ze=-79.815 Az status=0008 Ze status=0009 07:15:44 Check angles 07:15:44 SkyScan query 07:15:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.89<-15926 Statuses=0008 0009 07:15:45 Msec=3000 True Az=112.995 Ze=-58.89 Az status=0008 Ze status=0009 07:15:45 Check angles 07:15:45 SkyScan query 07:15:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.47<-14498 Statuses=0008 0009 07:15:45 Msec=3750 True Az=112.995 Ze=-37.47 Az status=0008 Ze status=0009 07:15:45 Check angles 07:15:45 SkyScan query 07:15:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.515<-13101 Statuses=0008 0009 07:15:46 Msec=4500 True Az=112.995 Ze=-16.515 Az status=0008 Ze status=0009 07:15:46 Check angles 07:15:46 SkyScan query 07:15:47 SkyScan query done: ret=0 az=112.995<-7533 ze=4.665<-11689 Statuses=0008 0009 07:15:47 Msec=5250 True Az=112.995 Ze=4.665 Az status=0008 Ze status=0009 07:15:47 Check angles 07:15:47 SkyScan query 07:15:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:15:48 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:15:48 Message to Master queued w/err=0: serial=98168 error=0 07:15:53 Received message from Master: op=Filter serial=98169 07:15:53 Color wheel filter change from 0 to 0 07:15:53 FLIGetFilterPos err=0 currentPosition=0 07:15:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:15:53 Filter is already there-color wheel unchanged 07:15:53 Received message from Master: op=Shutter serial=98170 07:15:53 Shutter LASER close 07:15:53 Received message from Camera: op=State serial=98172 07:15:53 GetSingleValue result=40 Value=cccccccc 07:15:53 SkyScan query 07:15:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:15:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:53 Parameters OK 07:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:53 Set A/D data flow result=40 07:15:53 Set A/D channel type result=40 07:15:53 Set A/D encoding result=40 07:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:53 Set channel filter=0.000000e+000 result=40 07:15:53 Config A/D Result=40 07:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:53 Get A/D filter: -9.255963e+061 result=40 07:15:53 Get A/D value=-858993460 result=40 07:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:53 Parameters OK 07:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:53 Set A/D data flow result=40 07:15:53 Set A/D channel type result=40 07:15:53 Set A/D encoding result=40 07:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:53 Set channel filter=0.000000e+000 result=40 07:15:53 Config A/D Result=40 07:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:53 Get A/D filter: -9.255963e+061 result=40 07:15:53 Get A/D value=-858993460 result=40 07:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:15:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:15:53 Aux= 07:15:53 Message to Camera, serial 98172 queued 07:16:30 Received message from Master: op=PointingHead serial=98185 07:16:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:16:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:16:31 Point started: ret=0 07:16:31 point_skyscan result=0 07:16:31 Check angles 07:16:31 SkyScan query 07:16:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:16:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:16:32 Message to Master queued w/err=0: serial=98185 error=0 07:16:37 Received message from Master: op=Filter serial=98186 07:16:37 Color wheel filter change from 0 to 0 07:16:37 FLIGetFilterPos err=0 currentPosition=0 07:16:37 FLIGetStepsRemaining err=0 RemainingSteps=0 07:16:37 Filter is already there-color wheel unchanged 07:16:37 Received message from Master: op=Shutter serial=98187 07:16:37 Shutter LASER close 07:16:37 Received message from Camera: op=State serial=98189 07:16:37 GetSingleValue result=40 Value=cccccccc 07:16:37 SkyScan query 07:16:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:16:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:38 Parameters OK 07:16:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:38 Set A/D data flow result=40 07:16:38 Set A/D channel type result=40 07:16:38 Set A/D encoding result=40 07:16:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:38 Set channel filter=0.000000e+000 result=40 07:16:38 Config A/D Result=40 07:16:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:38 Get A/D filter: -9.255963e+061 result=40 07:16:38 Get A/D value=-858993460 result=40 07:16:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:38 Parameters OK 07:16:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:38 Set A/D data flow result=40 07:16:38 Set A/D channel type result=40 07:16:38 Set A/D encoding result=40 07:16:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:38 Set channel filter=0.000000e+000 result=40 07:16:38 Config A/D Result=40 07:16:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:38 Get A/D filter: -9.255963e+061 result=40 07:16:38 Get A/D value=-858993460 result=40 07:16:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:16:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:16:38 Aux= 07:16:38 Message to Camera, serial 98189 queued 07:17:15 Received message from Master: op=PointingHead serial=98202 07:17:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:17:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:17:15 Point started: ret=0 07:17:15 point_skyscan result=0 07:17:16 Check angles 07:17:16 SkyScan query 07:17:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:17:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:17:16 Message to Master queued w/err=0: serial=98202 error=0 07:17:21 Received message from Master: op=Filter serial=98203 07:17:21 Color wheel filter change from 0 to 0 07:17:21 FLIGetFilterPos err=0 currentPosition=0 07:17:21 FLIGetStepsRemaining err=0 RemainingSteps=0 07:17:21 Filter is already there-color wheel unchanged 07:17:21 Received message from Master: op=Shutter serial=98204 07:17:21 Shutter LASER close 07:17:22 Received message from Camera: op=State serial=98206 07:17:22 GetSingleValue result=40 Value=cccccccc 07:17:22 SkyScan query 07:17:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:17:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:22 Parameters OK 07:17:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:22 Set A/D data flow result=40 07:17:22 Set A/D channel type result=40 07:17:22 Set A/D encoding result=40 07:17:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:22 Set channel filter=0.000000e+000 result=40 07:17:22 Config A/D Result=40 07:17:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:22 Get A/D filter: -9.255963e+061 result=40 07:17:22 Get A/D value=-858993460 result=40 07:17:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:22 Parameters OK 07:17:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:22 Set A/D data flow result=40 07:17:22 Set A/D channel type result=40 07:17:22 Set A/D encoding result=40 07:17:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:22 Set channel filter=0.000000e+000 result=40 07:17:22 Config A/D Result=40 07:17:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:22 Get A/D filter: -9.255963e+061 result=40 07:17:22 Get A/D value=-858993460 result=40 07:17:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:17:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:17:22 Aux= 07:17:22 Message to Camera, serial 98206 queued 07:17:59 Received message from Master: op=PointingHead serial=98219 07:17:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:17:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:17:59 Point started: ret=0 07:17:59 point_skyscan result=0 07:18:00 Check angles 07:18:00 SkyScan query 07:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:18:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:18:01 Message to Master queued w/err=0: serial=98219 error=0 07:18:06 Received message from Master: op=Filter serial=98220 07:18:06 Color wheel filter change from 0 to 0 07:18:06 FLIGetFilterPos err=0 currentPosition=0 07:18:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:18:06 Filter is already there-color wheel unchanged 07:18:06 Received message from Master: op=Shutter serial=98221 07:18:06 Shutter LASER close 07:18:06 Received message from Camera: op=State serial=98223 07:18:06 GetSingleValue result=40 Value=cccccccc 07:18:06 SkyScan query 07:18:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:18:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:06 Parameters OK 07:18:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:06 Set A/D data flow result=40 07:18:06 Set A/D channel type result=40 07:18:06 Set A/D encoding result=40 07:18:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:06 Set channel filter=0.000000e+000 result=40 07:18:06 Config A/D Result=40 07:18:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:06 Get A/D filter: -9.255963e+061 result=40 07:18:06 Get A/D value=-858993460 result=40 07:18:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:06 Parameters OK 07:18:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:06 Set A/D data flow result=40 07:18:06 Set A/D channel type result=40 07:18:06 Set A/D encoding result=40 07:18:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:06 Set channel filter=0.000000e+000 result=40 07:18:06 Config A/D Result=40 07:18:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:06 Get A/D filter: -9.255963e+061 result=40 07:18:06 Get A/D value=-858993460 result=40 07:18:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:18:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:18:06 Aux= 07:18:06 Message to Camera, serial 98223 queued 07:18:43 Received message from Master: op=PointingHead serial=98236 07:18:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:18:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:18:44 Point started: ret=0 07:18:44 point_skyscan result=0 07:18:44 Check angles 07:18:44 SkyScan query 07:18:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 07:18:45 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 07:18:45 Check angles 07:18:45 SkyScan query 07:18:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.52<-14968 Statuses=0008 0009 07:18:46 Msec=750 True Az=112.995 Ze=-44.52 Az status=0008 Ze status=0009 07:18:46 Check angles 07:18:46 SkyScan query 07:18:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.91<-16394 Statuses=0008 0009 07:18:46 Msec=1500 True Az=112.995 Ze=-65.91 Az status=0008 Ze status=0009 07:18:47 Check angles 07:18:47 SkyScan query 07:18:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.835<-17789 Statuses=0008 0009 07:18:47 Msec=2250 True Az=112.995 Ze=-86.835 Az status=0008 Ze status=0009 07:18:47 Check angles 07:18:47 SkyScan query 07:18:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.82<-19188 Statuses=0008 0009 07:18:48 Msec=3000 True Az=112.995 Ze=-107.82 Az status=0008 Ze status=0009 07:18:48 Check angles 07:18:48 SkyScan query 07:18:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.24<-20616 Statuses=0008 0009 07:18:49 Msec=3750 True Az=112.995 Ze=-129.24 Az status=0008 Ze status=0009 07:18:49 Check angles 07:18:49 SkyScan query 07:18:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.195<-22013 Statuses=0008 0009 07:18:49 Msec=4500 True Az=112.995 Ze=-150.195 Az status=0008 Ze status=0009 07:18:50 Check angles 07:18:50 SkyScan query 07:18:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-171<-23400 Statuses=0008 0009 07:18:50 Msec=5250 True Az=112.995 Ze=-171 Az status=0008 Ze status=0009 07:18:50 Check angles 07:18:50 SkyScan query 07:18:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:18:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:18:51 Message to Master queued w/err=0: serial=98236 error=0 07:18:56 Received message from Master: op=Filter serial=98237 07:18:56 Color wheel filter change from 0 to 0 07:18:56 FLIGetFilterPos err=0 currentPosition=0 07:18:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:18:56 Filter is already there-color wheel unchanged 07:18:56 Received message from Master: op=Shutter serial=98238 07:18:56 Shutter LASER open 07:18:56 Received message from Camera: op=State serial=98240 07:18:56 GetSingleValue result=40 Value=cccccccc 07:18:56 SkyScan query 07:18:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:18:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:57 Parameters OK 07:18:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:57 Set A/D data flow result=40 07:18:57 Set A/D channel type result=40 07:18:57 Set A/D encoding result=40 07:18:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:57 Set channel filter=0.000000e+000 result=40 07:18:57 Config A/D Result=40 07:18:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:57 Get A/D filter: -9.255963e+061 result=40 07:18:57 Get A/D value=-858993460 result=40 07:18:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:57 Parameters OK 07:18:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:57 Set A/D data flow result=40 07:18:57 Set A/D channel type result=40 07:18:57 Set A/D encoding result=40 07:18:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:57 Set channel filter=0.000000e+000 result=40 07:18:57 Config A/D Result=40 07:18:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:57 Get A/D filter: -9.255963e+061 result=40 07:18:57 Get A/D value=-858993460 result=40 07:18:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:18:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:18:57 Aux= 07:18:57 Message to Camera, serial 98240 queued 07:19:05 Received message from Master: op=Shutter serial=98250 07:19:05 Shutter LASER close 07:19:06 Received message from Master: op=PointingHead serial=98254 07:19:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:19:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:19:06 Point started: ret=0 07:19:06 point_skyscan result=0 07:19:07 Check angles 07:19:07 SkyScan query 07:19:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.52<-21568 Statuses=0008 0009 07:19:08 Msec=0 True Az=112.995 Ze=-143.52 Az status=0008 Ze status=0009 07:19:08 Check angles 07:19:08 SkyScan query 07:19:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 07:19:08 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 07:19:08 Check angles 07:19:08 SkyScan query 07:19:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 07:19:09 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 07:19:09 Check angles 07:19:09 SkyScan query 07:19:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.175<-17345 Statuses=0008 0009 07:19:10 Msec=2250 True Az=112.995 Ze=-80.175 Az status=0008 Ze status=0009 07:19:10 Check angles 07:19:10 SkyScan query 07:19:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 07:19:11 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 07:19:11 Check angles 07:19:11 SkyScan query 07:19:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.815<-14521 Statuses=0008 0009 07:19:11 Msec=3750 True Az=112.995 Ze=-37.815 Az status=0008 Ze status=0009 07:19:11 Check angles 07:19:11 SkyScan query 07:19:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.875<-13125 Statuses=0008 0009 07:19:12 Msec=4500 True Az=112.995 Ze=-16.875 Az status=0008 Ze status=0009 07:19:12 Check angles 07:19:12 SkyScan query 07:19:13 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 07:19:13 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 07:19:13 Check angles 07:19:13 SkyScan query 07:19:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:19:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:19:14 Message to Master queued w/err=0: serial=98254 error=0 07:19:19 Received message from Master: op=Filter serial=98255 07:19:19 Color wheel filter change from 0 to 0 07:19:19 FLIGetFilterPos err=0 currentPosition=0 07:19:19 FLIGetStepsRemaining err=0 RemainingSteps=0 07:19:19 Filter is already there-color wheel unchanged 07:19:19 Received message from Master: op=Shutter serial=98256 07:19:19 Shutter LASER close 07:19:19 Received message from Camera: op=State serial=98258 07:19:19 GetSingleValue result=40 Value=cccccccc 07:19:19 SkyScan query 07:19:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:19:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:19 Parameters OK 07:19:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:19 Set A/D data flow result=40 07:19:19 Set A/D channel type result=40 07:19:19 Set A/D encoding result=40 07:19:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:19 Set channel filter=0.000000e+000 result=40 07:19:19 Config A/D Result=40 07:19:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:19 Get A/D filter: -9.255963e+061 result=40 07:19:19 Get A/D value=-858993460 result=40 07:19:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:19 Parameters OK 07:19:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:19 Set A/D data flow result=40 07:19:19 Set A/D channel type result=40 07:19:19 Set A/D encoding result=40 07:19:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:19 Set channel filter=0.000000e+000 result=40 07:19:19 Config A/D Result=40 07:19:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:19 Get A/D filter: -9.255963e+061 result=40 07:19:19 Get A/D value=-858993460 result=40 07:19:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:19:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:19:19 Aux= 07:19:19 Message to Camera, serial 98258 queued 07:19:56 Received message from Master: op=PointingHead serial=98271 07:19:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:19:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:19:57 Point started: ret=0 07:19:57 point_skyscan result=0 07:19:57 Check angles 07:19:57 SkyScan query 07:19:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:19:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:19:58 Message to Master queued w/err=0: serial=98271 error=0 07:20:03 Received message from Master: op=Filter serial=98272 07:20:03 Color wheel filter change from 0 to 0 07:20:03 FLIGetFilterPos err=0 currentPosition=0 07:20:03 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:03 Filter is already there-color wheel unchanged 07:20:03 Received message from Master: op=Shutter serial=98273 07:20:03 Shutter LASER close 07:20:03 Received message from Camera: op=State serial=98275 07:20:03 GetSingleValue result=40 Value=cccccccc 07:20:03 SkyScan query 07:20:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:20:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:04 Parameters OK 07:20:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:04 Set A/D data flow result=40 07:20:04 Set A/D channel type result=40 07:20:04 Set A/D encoding result=40 07:20:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:04 Set channel filter=0.000000e+000 result=40 07:20:04 Config A/D Result=40 07:20:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:04 Get A/D filter: -9.255963e+061 result=40 07:20:04 Get A/D value=-858993460 result=40 07:20:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:04 Parameters OK 07:20:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:04 Set A/D data flow result=40 07:20:04 Set A/D channel type result=40 07:20:04 Set A/D encoding result=40 07:20:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:04 Set channel filter=0.000000e+000 result=40 07:20:04 Config A/D Result=40 07:20:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:04 Get A/D filter: -9.255963e+061 result=40 07:20:04 Get A/D value=-858993460 result=40 07:20:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:04 Aux= 07:20:04 Message to Camera, serial 98275 queued 07:20:40 Received message from Master: op=PointingHead serial=98287 07:20:40 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:20:40 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:20:40 Point started: ret=0 07:20:40 point_skyscan result=0 07:20:41 Check angles 07:20:41 SkyScan query 07:20:41 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 07:20:41 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 07:20:42 Check angles 07:20:42 SkyScan query 07:20:42 SkyScan query done: ret=0 az=153.975<-10265 ze=-6.495<-12433 Statuses=0009 0008 07:20:42 Msec=750 True Az=153.975 Ze=-6.495 Az status=0009 Ze status=0008 07:20:42 Check angles 07:20:42 SkyScan query 07:20:43 SkyScan query done: ret=0 az=171.45<-11430 ze=-6.495<-12433 Statuses=0009 0008 07:20:43 Msec=1500 True Az=171.45 Ze=-6.495 Az status=0009 Ze status=0008 07:20:43 Check angles 07:20:43 SkyScan query 07:20:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:20:44 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:20:44 Message to Master queued w/err=0: serial=98287 error=0 07:20:49 Received message from Master: op=Filter serial=98288 07:20:49 Color wheel filter change from 0 to 0 07:20:49 FLIGetFilterPos err=0 currentPosition=0 07:20:49 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:49 Filter is already there-color wheel unchanged 07:20:49 Received message from Master: op=Shutter serial=98289 07:20:49 Shutter LASER close 07:20:49 Received message from Camera: op=State serial=98291 07:20:49 GetSingleValue result=40 Value=cccccccc 07:20:49 SkyScan query 07:20:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:20:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:49 Parameters OK 07:20:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:49 Set A/D data flow result=40 07:20:49 Set A/D channel type result=40 07:20:49 Set A/D encoding result=40 07:20:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:49 Set channel filter=0.000000e+000 result=40 07:20:49 Config A/D Result=40 07:20:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:49 Get A/D filter: -9.255963e+061 result=40 07:20:49 Get A/D value=-858993460 result=40 07:20:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:49 Parameters OK 07:20:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:49 Set A/D data flow result=40 07:20:49 Set A/D channel type result=40 07:20:49 Set A/D encoding result=40 07:20:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:49 Set channel filter=0.000000e+000 result=40 07:20:49 Config A/D Result=40 07:20:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:49 Get A/D filter: -9.255963e+061 result=40 07:20:49 Get A/D value=-858993460 result=40 07:20:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:49 Aux= 07:20:49 Message to Camera, serial 98291 queued 07:21:26 Received message from Master: op=PointingHead serial=98304 07:21:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:21:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:21:27 Point started: ret=0 07:21:27 point_skyscan result=0 07:21:27 Check angles 07:21:27 SkyScan query 07:21:28 SkyScan query done: ret=0 az=153.075<-10205 ze=6.51<-11566 Statuses=0009 0008 07:21:28 Msec=0 True Az=153.075 Ze=6.51 Az status=0009 Ze status=0008 07:21:28 Check angles 07:21:28 SkyScan query 07:21:29 SkyScan query done: ret=0 az=135.24<-9016 ze=6.495<-11567 Statuses=0009 0008 07:21:29 Msec=750 True Az=135.24 Ze=6.495 Az status=0009 Ze status=0008 07:21:29 Check angles 07:21:29 SkyScan query 07:21:29 SkyScan query done: ret=0 az=117.81<-7854 ze=6.495<-11567 Statuses=0009 0008 07:21:29 Msec=1500 True Az=117.81 Ze=6.495 Az status=0009 Ze status=0008 07:21:30 Check angles 07:21:30 SkyScan query 07:21:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:21:30 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:21:30 Message to Master queued w/err=0: serial=98304 error=0 07:21:35 Received message from Master: op=Filter serial=98305 07:21:35 Color wheel filter change from 0 to 0 07:21:35 FLIGetFilterPos err=0 currentPosition=0 07:21:35 FLIGetStepsRemaining err=0 RemainingSteps=0 07:21:35 Filter is already there-color wheel unchanged 07:21:35 Received message from Master: op=Shutter serial=98306 07:21:35 Shutter LASER close 07:21:35 Received message from Camera: op=State serial=98308 07:21:35 GetSingleValue result=40 Value=cccccccc 07:21:35 SkyScan query 07:21:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:21:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:36 Parameters OK 07:21:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:36 Set A/D data flow result=40 07:21:36 Set A/D channel type result=40 07:21:36 Set A/D encoding result=40 07:21:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:36 Set channel filter=0.000000e+000 result=40 07:21:36 Config A/D Result=40 07:21:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:36 Get A/D filter: -9.255963e+061 result=40 07:21:36 Get A/D value=-858993460 result=40 07:21:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:36 Parameters OK 07:21:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:36 Set A/D data flow result=40 07:21:36 Set A/D channel type result=40 07:21:36 Set A/D encoding result=40 07:21:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:36 Set channel filter=0.000000e+000 result=40 07:21:36 Config A/D Result=40 07:21:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:36 Get A/D filter: -9.255963e+061 result=40 07:21:36 Get A/D value=-858993460 result=40 07:21:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:21:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:21:36 Aux= 07:21:36 Message to Camera, serial 98308 queued 07:22:13 Received message from Master: op=PointingHead serial=98321 07:22:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:22:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:22:13 Point started: ret=0 07:22:13 point_skyscan result=0 07:22:14 Check angles 07:22:14 SkyScan query 07:22:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.43<-13562 Statuses=0008 0009 07:22:15 Msec=0 True Az=112.995 Ze=-23.43 Az status=0008 Ze status=0009 07:22:15 Check angles 07:22:15 SkyScan query 07:22:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 07:22:15 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 07:22:15 Check angles 07:22:15 SkyScan query 07:22:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 07:22:16 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 07:22:16 Check angles 07:22:16 SkyScan query 07:22:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 07:22:17 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 07:22:17 Check angles 07:22:17 SkyScan query 07:22:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.685<-19179 Statuses=0008 0009 07:22:18 Msec=3000 True Az=112.995 Ze=-107.685 Az status=0008 Ze status=0009 07:22:18 Check angles 07:22:18 SkyScan query 07:22:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.61<-20574 Statuses=0008 0009 07:22:18 Msec=3750 True Az=112.995 Ze=-128.61 Az status=0008 Ze status=0009 07:22:18 Check angles 07:22:18 SkyScan query 07:22:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.045<-22003 Statuses=0008 0009 07:22:19 Msec=4500 True Az=112.995 Ze=-150.045 Az status=0008 Ze status=0009 07:22:19 Check angles 07:22:19 SkyScan query 07:22:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0008 0009 07:22:20 Msec=5250 True Az=112.995 Ze=-170.895 Az status=0008 Ze status=0009 07:22:20 Check angles 07:22:20 SkyScan query 07:22:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:22:21 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:22:21 Message to Master queued w/err=0: serial=98321 error=0 07:22:26 Received message from Master: op=Filter serial=98322 07:22:26 Color wheel filter change from 0 to 0 07:22:26 FLIGetFilterPos err=0 currentPosition=0 07:22:26 FLIGetStepsRemaining err=0 RemainingSteps=0 07:22:26 Filter is already there-color wheel unchanged 07:22:26 Received message from Master: op=Shutter serial=98323 07:22:26 Shutter LASER open 07:22:26 Received message from Camera: op=State serial=98325 07:22:26 GetSingleValue result=40 Value=cccccccc 07:22:26 SkyScan query 07:22:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:22:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:26 Parameters OK 07:22:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:26 Set A/D data flow result=40 07:22:26 Set A/D channel type result=40 07:22:26 Set A/D encoding result=40 07:22:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:26 Set channel filter=0.000000e+000 result=40 07:22:26 Config A/D Result=40 07:22:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:26 Get A/D filter: -9.255963e+061 result=40 07:22:26 Get A/D value=-858993460 result=40 07:22:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:26 Parameters OK 07:22:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:26 Set A/D data flow result=40 07:22:26 Set A/D channel type result=40 07:22:26 Set A/D encoding result=40 07:22:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:26 Set channel filter=0.000000e+000 result=40 07:22:26 Config A/D Result=40 07:22:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:26 Get A/D filter: -9.255963e+061 result=40 07:22:26 Get A/D value=-858993460 result=40 07:22:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:22:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:22:26 Aux= 07:22:26 Message to Camera, serial 98325 queued 07:22:35 Received message from Master: op=Shutter serial=98335 07:22:35 Shutter LASER close 07:22:35 Received message from Master: op=PointingHead serial=98339 07:22:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:22:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:22:36 Point started: ret=0 07:22:36 point_skyscan result=0 07:22:36 Check angles 07:22:36 SkyScan query 07:22:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.04<-21536 Statuses=0008 0009 07:22:37 Msec=0 True Az=112.995 Ze=-143.04 Az status=0008 Ze status=0009 07:22:37 Check angles 07:22:37 SkyScan query 07:22:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 07:22:38 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 07:22:38 Check angles 07:22:38 SkyScan query 07:22:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 07:22:39 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 07:22:39 Check angles 07:22:39 SkyScan query 07:22:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.16<-17344 Statuses=0008 0009 07:22:39 Msec=2250 True Az=112.995 Ze=-80.16 Az status=0008 Ze status=0009 07:22:39 Check angles 07:22:39 SkyScan query 07:22:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 07:22:40 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 07:22:40 Check angles 07:22:40 SkyScan query 07:22:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 07:22:41 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 07:22:41 Check angles 07:22:41 SkyScan query 07:22:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 07:22:42 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 07:22:42 Check angles 07:22:42 SkyScan query 07:22:42 SkyScan query done: ret=0 az=112.995<-7533 ze=3.69<-11754 Statuses=0008 0009 07:22:42 Msec=5250 True Az=112.995 Ze=3.69 Az status=0008 Ze status=0009 07:22:42 Check angles 07:22:42 SkyScan query 07:22:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:22:43 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:22:43 Message to Master queued w/err=0: serial=98339 error=0 07:22:48 Received message from Master: op=Filter serial=98340 07:22:48 Color wheel filter change from 0 to 0 07:22:48 FLIGetFilterPos err=0 currentPosition=0 07:22:48 FLIGetStepsRemaining err=0 RemainingSteps=0 07:22:48 Filter is already there-color wheel unchanged 07:22:48 Received message from Master: op=Shutter serial=98341 07:22:48 Shutter LASER close 07:22:48 Received message from Camera: op=State serial=98343 07:22:48 GetSingleValue result=40 Value=cccccccc 07:22:48 SkyScan query 07:22:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:22:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:49 Parameters OK 07:22:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:49 Set A/D data flow result=40 07:22:49 Set A/D channel type result=40 07:22:49 Set A/D encoding result=40 07:22:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:49 Set channel filter=0.000000e+000 result=40 07:22:49 Config A/D Result=40 07:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:49 Get A/D filter: -9.255963e+061 result=40 07:22:49 Get A/D value=-858993460 result=40 07:22:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:49 Parameters OK 07:22:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:49 Set A/D data flow result=40 07:22:49 Set A/D channel type result=40 07:22:49 Set A/D encoding result=40 07:22:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:49 Set channel filter=0.000000e+000 result=40 07:22:49 Config A/D Result=40 07:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:49 Get A/D filter: -9.255963e+061 result=40 07:22:49 Get A/D value=-858993460 result=40 07:22:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:22:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:22:49 Aux= 07:22:49 Message to Camera, serial 98343 queued 07:23:26 Received message from Master: op=PointingHead serial=98356 07:23:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:23:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:23:26 Point started: ret=0 07:23:26 point_skyscan result=0 07:23:27 Check angles 07:23:27 SkyScan query 07:23:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:23:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:23:27 Message to Master queued w/err=0: serial=98356 error=0 07:23:32 Received message from Master: op=Filter serial=98357 07:23:32 Color wheel filter change from 0 to 0 07:23:32 FLIGetFilterPos err=0 currentPosition=0 07:23:32 FLIGetStepsRemaining err=0 RemainingSteps=0 07:23:32 Filter is already there-color wheel unchanged 07:23:33 Received message from Master: op=Shutter serial=98358 07:23:33 Shutter LASER close 07:23:33 Received message from Camera: op=State serial=98360 07:23:33 GetSingleValue result=40 Value=cccccccc 07:23:33 SkyScan query 07:23:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:23:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:33 Parameters OK 07:23:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:33 Set A/D data flow result=40 07:23:33 Set A/D channel type result=40 07:23:33 Set A/D encoding result=40 07:23:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:33 Set channel filter=0.000000e+000 result=40 07:23:33 Config A/D Result=40 07:23:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:33 Get A/D filter: -9.255963e+061 result=40 07:23:33 Get A/D value=-858993460 result=40 07:23:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:33 Parameters OK 07:23:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:33 Set A/D data flow result=40 07:23:33 Set A/D channel type result=40 07:23:33 Set A/D encoding result=40 07:23:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:33 Set channel filter=0.000000e+000 result=40 07:23:33 Config A/D Result=40 07:23:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:33 Get A/D filter: -9.255963e+061 result=40 07:23:33 Get A/D value=-858993460 result=40 07:23:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:23:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:23:33 Aux= 07:23:33 Message to Camera, serial 98360 queued [UTC 2019-3-4 07:23:50] 07:24:10 Received message from Master: op=PointingHead serial=98373 07:24:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:24:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:24:10 Point started: ret=0 07:24:10 point_skyscan result=0 07:24:11 Check angles 07:24:11 SkyScan query 07:24:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:24:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:24:12 Message to Master queued w/err=0: serial=98373 error=0 07:24:17 Received message from Master: op=Filter serial=98374 07:24:17 Color wheel filter change from 0 to 0 07:24:17 FLIGetFilterPos err=0 currentPosition=0 07:24:17 FLIGetStepsRemaining err=0 RemainingSteps=0 07:24:17 Filter is already there-color wheel unchanged 07:24:17 Received message from Master: op=Shutter serial=98375 07:24:17 Shutter LASER close 07:24:17 Received message from Camera: op=State serial=98377 07:24:17 GetSingleValue result=40 Value=cccccccc 07:24:17 SkyScan query 07:24:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:24:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:18 Parameters OK 07:24:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:18 Set A/D data flow result=40 07:24:18 Set A/D channel type result=40 07:24:18 Set A/D encoding result=40 07:24:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:18 Set channel filter=0.000000e+000 result=40 07:24:18 Config A/D Result=40 07:24:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:18 Get A/D filter: -9.255963e+061 result=40 07:24:18 Get A/D value=-858993460 result=40 07:24:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:18 Parameters OK 07:24:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:18 Set A/D data flow result=40 07:24:18 Set A/D channel type result=40 07:24:18 Set A/D encoding result=40 07:24:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:18 Set channel filter=0.000000e+000 result=40 07:24:18 Config A/D Result=40 07:24:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:18 Get A/D filter: -9.255963e+061 result=40 07:24:18 Get A/D value=-858993460 result=40 07:24:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:24:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:24:18 Aux= 07:24:18 Message to Camera, serial 98377 queued 07:24:54 Received message from Master: op=PointingHead serial=98390 07:24:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:24:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:24:55 Point started: ret=0 07:24:55 point_skyscan result=0 07:24:55 Check angles 07:24:55 SkyScan query 07:24:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:24:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:24:56 Message to Master queued w/err=0: serial=98390 error=0 07:25:01 Received message from Master: op=Filter serial=98391 07:25:01 Color wheel filter change from 0 to 0 07:25:01 FLIGetFilterPos err=0 currentPosition=0 07:25:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:01 Filter is already there-color wheel unchanged 07:25:01 Received message from Master: op=Shutter serial=98392 07:25:01 Shutter LASER close 07:25:01 Received message from Camera: op=State serial=98394 07:25:01 GetSingleValue result=40 Value=cccccccc 07:25:01 SkyScan query 07:25:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:25:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:02 Parameters OK 07:25:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:02 Set A/D data flow result=40 07:25:02 Set A/D channel type result=40 07:25:02 Set A/D encoding result=40 07:25:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:02 Set channel filter=0.000000e+000 result=40 07:25:02 Config A/D Result=40 07:25:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:02 Get A/D filter: -9.255963e+061 result=40 07:25:02 Get A/D value=-858993460 result=40 07:25:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:02 Parameters OK 07:25:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:02 Set A/D data flow result=40 07:25:02 Set A/D channel type result=40 07:25:02 Set A/D encoding result=40 07:25:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:02 Set channel filter=0.000000e+000 result=40 07:25:02 Config A/D Result=40 07:25:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:02 Get A/D filter: -9.255963e+061 result=40 07:25:02 Get A/D value=-858993460 result=40 07:25:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:02 Aux= 07:25:02 Message to Camera, serial 98394 queued 07:25:38 Received message from Master: op=PointingHead serial=98406 07:25:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:25:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:25:38 Point started: ret=0 07:25:38 point_skyscan result=0 07:25:39 Check angles 07:25:39 SkyScan query 07:25:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 07:25:39 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 07:25:40 Check angles 07:25:40 SkyScan query 07:25:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.16<-14944 Statuses=0008 0009 07:25:40 Msec=750 True Az=112.995 Ze=-44.16 Az status=0008 Ze status=0009 07:25:40 Check angles 07:25:40 SkyScan query 07:25:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.1<-16340 Statuses=0008 0009 07:25:41 Msec=1500 True Az=112.995 Ze=-65.1 Az status=0008 Ze status=0009 07:25:41 Check angles 07:25:41 SkyScan query 07:25:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.07<-17738 Statuses=0008 0009 07:25:42 Msec=2250 True Az=112.995 Ze=-86.07 Az status=0008 Ze status=0009 07:25:42 Check angles 07:25:42 SkyScan query 07:25:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.995<-19133 Statuses=0008 0009 07:25:42 Msec=3000 True Az=112.995 Ze=-106.995 Az status=0008 Ze status=0009 07:25:43 Check angles 07:25:43 SkyScan query 07:25:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.935<-20529 Statuses=0008 0009 07:25:43 Msec=3750 True Az=112.995 Ze=-127.935 Az status=0008 Ze status=0009 07:25:43 Check angles 07:25:43 SkyScan query 07:25:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.89<-21926 Statuses=0008 0009 07:25:44 Msec=4500 True Az=112.995 Ze=-148.89 Az status=0008 Ze status=0009 07:25:44 Check angles 07:25:44 SkyScan query 07:25:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.845<-23323 Statuses=0008 0009 07:25:45 Msec=5250 True Az=112.995 Ze=-169.845 Az status=0008 Ze status=0009 07:25:45 Check angles 07:25:45 SkyScan query 07:25:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:25:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:25:45 Message to Master queued w/err=0: serial=98406 error=0 07:25:50 Received message from Master: op=Filter serial=98407 07:25:50 Color wheel filter change from 0 to 0 07:25:50 FLIGetFilterPos err=0 currentPosition=0 07:25:50 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:50 Filter is already there-color wheel unchanged 07:25:51 Received message from Master: op=Shutter serial=98408 07:25:51 Shutter LASER open 07:25:51 Received message from Camera: op=State serial=98410 07:25:51 GetSingleValue result=40 Value=cccccccc 07:25:51 SkyScan query 07:25:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:25:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:51 Parameters OK 07:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:51 Set A/D data flow result=40 07:25:51 Set A/D channel type result=40 07:25:51 Set A/D encoding result=40 07:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:51 Set channel filter=0.000000e+000 result=40 07:25:51 Config A/D Result=40 07:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:51 Get A/D filter: -9.255963e+061 result=40 07:25:51 Get A/D value=-858993460 result=40 07:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:51 Parameters OK 07:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:51 Set A/D data flow result=40 07:25:51 Set A/D channel type result=40 07:25:51 Set A/D encoding result=40 07:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:51 Set channel filter=0.000000e+000 result=40 07:25:51 Config A/D Result=40 07:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:51 Get A/D filter: -9.255963e+061 result=40 07:25:51 Get A/D value=-858993460 result=40 07:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:51 Aux= 07:25:51 Message to Camera, serial 98410 queued 07:26:00 Received message from Master: op=Shutter serial=98420 07:26:00 Shutter LASER close 07:26:00 Received message from Master: op=PointingHead serial=98424 07:26:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:26:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:26:01 Point started: ret=0 07:26:01 point_skyscan result=0 07:26:01 Check angles 07:26:01 SkyScan query 07:26:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 07:26:02 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 07:26:02 Check angles 07:26:02 SkyScan query 07:26:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.31<-20154 Statuses=0008 0009 07:26:03 Msec=750 True Az=112.995 Ze=-122.31 Az status=0008 Ze status=0009 07:26:03 Check angles 07:26:03 SkyScan query 07:26:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.34<-18756 Statuses=0008 0009 07:26:04 Msec=1500 True Az=112.995 Ze=-101.34 Az status=0008 Ze status=0009 07:26:04 Check angles 07:26:04 SkyScan query 07:26:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.935<-17329 Statuses=0008 0009 07:26:04 Msec=2250 True Az=112.995 Ze=-79.935 Az status=0008 Ze status=0009 07:26:04 Check angles 07:26:04 SkyScan query 07:26:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.01<-15934 Statuses=0008 0009 07:26:05 Msec=3000 True Az=112.995 Ze=-59.01 Az status=0008 Ze status=0009 07:26:05 Check angles 07:26:05 SkyScan query 07:26:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.995<-14533 Statuses=0008 0009 07:26:06 Msec=3750 True Az=112.995 Ze=-37.995 Az status=0008 Ze status=0009 07:26:06 Check angles 07:26:06 SkyScan query 07:26:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.635<-13109 Statuses=0008 0009 07:26:07 Msec=4500 True Az=112.995 Ze=-16.635 Az status=0008 Ze status=0009 07:26:07 Check angles 07:26:07 SkyScan query 07:26:07 SkyScan query done: ret=0 az=112.995<-7533 ze=4.275<-11715 Statuses=0008 0009 07:26:07 Msec=5250 True Az=112.995 Ze=4.275 Az status=0008 Ze status=0009 07:26:07 Check angles 07:26:07 SkyScan query 07:26:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:26:08 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:26:08 Message to Master queued w/err=0: serial=98424 error=0 07:26:13 Received message from Master: op=Filter serial=98425 07:26:13 Color wheel filter change from 0 to 0 07:26:13 FLIGetFilterPos err=0 currentPosition=0 07:26:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:13 Filter is already there-color wheel unchanged 07:26:13 Received message from Master: op=Shutter serial=98426 07:26:13 Shutter LASER close 07:26:13 Received message from Camera: op=State serial=98428 07:26:13 GetSingleValue result=40 Value=cccccccc 07:26:13 SkyScan query 07:26:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:26:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:14 Parameters OK 07:26:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:14 Set A/D data flow result=40 07:26:14 Set A/D channel type result=40 07:26:14 Set A/D encoding result=40 07:26:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:14 Set channel filter=0.000000e+000 result=40 07:26:14 Config A/D Result=40 07:26:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:14 Get A/D filter: -9.255963e+061 result=40 07:26:14 Get A/D value=-858993460 result=40 07:26:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:14 Parameters OK 07:26:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:14 Set A/D data flow result=40 07:26:14 Set A/D channel type result=40 07:26:14 Set A/D encoding result=40 07:26:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:14 Set channel filter=0.000000e+000 result=40 07:26:14 Config A/D Result=40 07:26:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:14 Get A/D filter: -9.255963e+061 result=40 07:26:14 Get A/D value=-858993460 result=40 07:26:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:14 Aux= 07:26:14 Message to Camera, serial 98428 queued 07:26:51 Received message from Master: op=PointingHead serial=98441 07:26:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:26:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:26:51 Point started: ret=0 07:26:51 point_skyscan result=0 07:26:52 Check angles 07:26:52 SkyScan query 07:26:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:26:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:26:52 Message to Master queued w/err=0: serial=98441 error=0 07:26:57 Received message from Master: op=Filter serial=98442 07:26:57 Color wheel filter change from 0 to 0 07:26:57 FLIGetFilterPos err=0 currentPosition=0 07:26:57 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:57 Filter is already there-color wheel unchanged 07:26:58 Received message from Master: op=Shutter serial=98443 07:26:58 Shutter LASER close 07:26:58 Received message from Camera: op=State serial=98445 07:26:58 GetSingleValue result=40 Value=cccccccc 07:26:58 SkyScan query 07:26:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:26:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:58 Parameters OK 07:26:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:58 Set A/D data flow result=40 07:26:58 Set A/D channel type result=40 07:26:58 Set A/D encoding result=40 07:26:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:58 Set channel filter=0.000000e+000 result=40 07:26:58 Config A/D Result=40 07:26:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:58 Get A/D filter: -9.255963e+061 result=40 07:26:58 Get A/D value=-858993460 result=40 07:26:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:58 Parameters OK 07:26:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:58 Set A/D data flow result=40 07:26:58 Set A/D channel type result=40 07:26:58 Set A/D encoding result=40 07:26:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:58 Set channel filter=0.000000e+000 result=40 07:26:58 Config A/D Result=40 07:26:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:58 Get A/D filter: -9.255963e+061 result=40 07:26:58 Get A/D value=-858993460 result=40 07:26:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:58 Aux= 07:26:58 Message to Camera, serial 98445 queued 07:27:35 Received message from Master: op=PointingHead serial=98458 07:27:35 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:27:35 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:27:35 Point started: ret=0 07:27:35 point_skyscan result=0 07:27:36 Check angles 07:27:36 SkyScan query 07:27:37 SkyScan query done: ret=0 az=136.395<-9093 ze=-6.51<-12434 Statuses=0009 0008 07:27:37 Msec=0 True Az=136.395 Ze=-6.51 Az status=0009 Ze status=0008 07:27:37 Check angles 07:27:37 SkyScan query 07:27:38 SkyScan query done: ret=0 az=153.81<-10254 ze=-6.51<-12434 Statuses=0009 0008 07:27:38 Msec=750 True Az=153.81 Ze=-6.51 Az status=0009 Ze status=0008 07:27:38 Check angles 07:27:38 SkyScan query 07:27:38 SkyScan query done: ret=0 az=171.615<-11441 ze=-6.495<-12433 Statuses=0009 0008 07:27:38 Msec=1500 True Az=171.615 Ze=-6.495 Az status=0009 Ze status=0008 07:27:38 Check angles 07:27:38 SkyScan query 07:27:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:27:39 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:27:39 Message to Master queued w/err=0: serial=98458 error=0 07:27:44 Received message from Master: op=Filter serial=98459 07:27:44 Color wheel filter change from 0 to 0 07:27:44 FLIGetFilterPos err=0 currentPosition=0 07:27:44 FLIGetStepsRemaining err=0 RemainingSteps=0 07:27:44 Filter is already there-color wheel unchanged 07:27:44 Received message from Master: op=Shutter serial=98460 07:27:44 Shutter LASER close 07:27:44 Received message from Camera: op=State serial=98462 07:27:44 GetSingleValue result=40 Value=cccccccc 07:27:44 SkyScan query 07:27:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:27:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:45 Parameters OK 07:27:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:45 Set A/D data flow result=40 07:27:45 Set A/D channel type result=40 07:27:45 Set A/D encoding result=40 07:27:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:45 Set channel filter=0.000000e+000 result=40 07:27:45 Config A/D Result=40 07:27:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:45 Get A/D filter: -9.255963e+061 result=40 07:27:45 Get A/D value=-858993460 result=40 07:27:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:45 Parameters OK 07:27:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:45 Set A/D data flow result=40 07:27:45 Set A/D channel type result=40 07:27:45 Set A/D encoding result=40 07:27:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:45 Set channel filter=0.000000e+000 result=40 07:27:45 Config A/D Result=40 07:27:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:45 Get A/D filter: -9.255963e+061 result=40 07:27:45 Get A/D value=-858993460 result=40 07:27:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:27:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:27:45 Aux= 07:27:45 Message to Camera, serial 98462 queued 07:28:22 Received message from Master: op=PointingHead serial=98475 07:28:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:28:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:28:22 Point started: ret=0 07:28:22 point_skyscan result=0 07:28:23 Check angles 07:28:23 SkyScan query 07:28:23 SkyScan query done: ret=0 az=153.045<-10203 ze=6.51<-11566 Statuses=0009 0008 07:28:23 Msec=0 True Az=153.045 Ze=6.51 Az status=0009 Ze status=0008 07:28:23 Check angles 07:28:23 SkyScan query 07:28:24 SkyScan query done: ret=0 az=135.555<-9037 ze=6.495<-11567 Statuses=0009 0008 07:28:24 Msec=750 True Az=135.555 Ze=6.495 Az status=0009 Ze status=0008 07:28:24 Check angles 07:28:24 SkyScan query 07:28:25 SkyScan query done: ret=0 az=118.125<-7875 ze=6.495<-11567 Statuses=0009 0008 07:28:25 Msec=1500 True Az=118.125 Ze=6.495 Az status=0009 Ze status=0008 07:28:25 Check angles 07:28:25 SkyScan query 07:28:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:28:26 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:28:26 Message to Master queued w/err=0: serial=98475 error=0 07:28:31 Received message from Master: op=Filter serial=98476 07:28:31 Color wheel filter change from 0 to 0 07:28:31 FLIGetFilterPos err=0 currentPosition=0 07:28:31 FLIGetStepsRemaining err=0 RemainingSteps=0 07:28:31 Filter is already there-color wheel unchanged 07:28:31 Received message from Master: op=Shutter serial=98477 07:28:31 Shutter LASER close 07:28:31 Received message from Camera: op=State serial=98479 07:28:31 GetSingleValue result=40 Value=cccccccc 07:28:31 SkyScan query 07:28:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:28:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:31 Parameters OK 07:28:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:31 Set A/D data flow result=40 07:28:31 Set A/D channel type result=40 07:28:31 Set A/D encoding result=40 07:28:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:31 Set channel filter=0.000000e+000 result=40 07:28:31 Config A/D Result=40 07:28:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:31 Get A/D filter: -9.255963e+061 result=40 07:28:31 Get A/D value=-858993460 result=40 07:28:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:31 Parameters OK 07:28:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:31 Set A/D data flow result=40 07:28:31 Set A/D channel type result=40 07:28:31 Set A/D encoding result=40 07:28:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:31 Set channel filter=0.000000e+000 result=40 07:28:31 Config A/D Result=40 07:28:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:31 Get A/D filter: -9.255963e+061 result=40 07:28:31 Get A/D value=-858993460 result=40 07:28:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:28:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:28:31 Aux= 07:28:31 Message to Camera, serial 98479 queued 07:29:08 Received message from Master: op=PointingHead serial=98492 07:29:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:29:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:29:09 Point started: ret=0 07:29:09 point_skyscan result=0 07:29:09 Check angles 07:29:09 SkyScan query 07:29:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 07:29:10 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 07:29:10 Check angles 07:29:10 SkyScan query 07:29:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.655<-14977 Statuses=0008 0009 07:29:11 Msec=750 True Az=112.995 Ze=-44.655 Az status=0008 Ze status=0009 07:29:11 Check angles 07:29:11 SkyScan query 07:29:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.61<-16374 Statuses=0008 0009 07:29:11 Msec=1500 True Az=112.995 Ze=-65.61 Az status=0008 Ze status=0009 07:29:12 Check angles 07:29:12 SkyScan query 07:29:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.535<-17769 Statuses=0008 0009 07:29:12 Msec=2250 True Az=112.995 Ze=-86.535 Az status=0008 Ze status=0009 07:29:12 Check angles 07:29:12 SkyScan query 07:29:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.52<-19168 Statuses=0008 0009 07:29:13 Msec=3000 True Az=112.995 Ze=-107.52 Az status=0008 Ze status=0009 07:29:13 Check angles 07:29:13 SkyScan query 07:29:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.43<-20562 Statuses=0008 0009 07:29:14 Msec=3750 True Az=112.995 Ze=-128.43 Az status=0008 Ze status=0009 07:29:14 Check angles 07:29:14 SkyScan query 07:29:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.43<-21962 Statuses=0008 0009 07:29:14 Msec=4500 True Az=112.995 Ze=-149.43 Az status=0008 Ze status=0009 07:29:15 Check angles 07:29:15 SkyScan query 07:29:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.355<-23357 Statuses=0008 0009 07:29:15 Msec=5250 True Az=112.995 Ze=-170.355 Az status=0008 Ze status=0009 07:29:15 Check angles 07:29:15 SkyScan query 07:29:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:29:16 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:29:16 Message to Master queued w/err=0: serial=98492 error=0 07:29:21 Received message from Master: op=Filter serial=98493 07:29:21 Color wheel filter change from 0 to 0 07:29:21 FLIGetFilterPos err=0 currentPosition=0 07:29:21 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:21 Filter is already there-color wheel unchanged 07:29:21 Received message from Master: op=Shutter serial=98494 07:29:21 Shutter LASER open 07:29:21 Received message from Camera: op=State serial=98496 07:29:21 GetSingleValue result=40 Value=cccccccc 07:29:21 SkyScan query 07:29:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:29:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:22 Parameters OK 07:29:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:22 Set A/D data flow result=40 07:29:22 Set A/D channel type result=40 07:29:22 Set A/D encoding result=40 07:29:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:22 Set channel filter=0.000000e+000 result=40 07:29:22 Config A/D Result=40 07:29:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:22 Get A/D filter: -9.255963e+061 result=40 07:29:22 Get A/D value=-858993460 result=40 07:29:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:22 Parameters OK 07:29:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:22 Set A/D data flow result=40 07:29:22 Set A/D channel type result=40 07:29:22 Set A/D encoding result=40 07:29:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:22 Set channel filter=0.000000e+000 result=40 07:29:22 Config A/D Result=40 07:29:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:22 Get A/D filter: -9.255963e+061 result=40 07:29:22 Get A/D value=-858993460 result=40 07:29:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:22 Aux= 07:29:22 Message to Camera, serial 98496 queued 07:29:30 Received message from Master: op=Shutter serial=98506 07:29:30 Shutter LASER close 07:29:31 Received message from Master: op=PointingHead serial=98510 07:29:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:29:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:29:31 Point started: ret=0 07:29:31 point_skyscan result=0 07:29:32 Check angles 07:29:32 SkyScan query 07:29:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.995<-21533 Statuses=0008 0009 07:29:32 Msec=0 True Az=112.995 Ze=-142.995 Az status=0008 Ze status=0009 07:29:33 Check angles 07:29:33 SkyScan query 07:29:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 07:29:33 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 07:29:33 Check angles 07:29:33 SkyScan query 07:29:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 07:29:34 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 07:29:34 Check angles 07:29:34 SkyScan query 07:29:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 07:29:35 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 07:29:35 Check angles 07:29:35 SkyScan query 07:29:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 07:29:35 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 07:29:36 Check angles 07:29:36 SkyScan query 07:29:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.755<-14517 Statuses=0008 0009 07:29:36 Msec=3750 True Az=112.995 Ze=-37.755 Az status=0008 Ze status=0009 07:29:36 Check angles 07:29:36 SkyScan query 07:29:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.815<-13121 Statuses=0008 0009 07:29:37 Msec=4500 True Az=112.995 Ze=-16.815 Az status=0008 Ze status=0009 07:29:37 Check angles 07:29:37 SkyScan query 07:29:38 SkyScan query done: ret=0 az=112.995<-7533 ze=4.125<-11725 Statuses=0008 0009 07:29:38 Msec=5250 True Az=112.995 Ze=4.125 Az status=0008 Ze status=0009 07:29:38 Check angles 07:29:38 SkyScan query 07:29:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:29:38 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:29:38 Message to Master queued w/err=0: serial=98510 error=0 07:29:43 Received message from Master: op=Filter serial=98511 07:29:43 Color wheel filter change from 0 to 0 07:29:43 FLIGetFilterPos err=0 currentPosition=0 07:29:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:43 Filter is already there-color wheel unchanged 07:29:44 Received message from Master: op=Shutter serial=98512 07:29:44 Shutter LASER close 07:29:44 Received message from Camera: op=State serial=98514 07:29:44 GetSingleValue result=40 Value=cccccccc 07:29:44 SkyScan query 07:29:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:29:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:44 Parameters OK 07:29:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:44 Set A/D data flow result=40 07:29:44 Set A/D channel type result=40 07:29:44 Set A/D encoding result=40 07:29:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:44 Set channel filter=0.000000e+000 result=40 07:29:44 Config A/D Result=40 07:29:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:44 Get A/D filter: -9.255963e+061 result=40 07:29:44 Get A/D value=-858993460 result=40 07:29:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:44 Parameters OK 07:29:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:44 Set A/D data flow result=40 07:29:44 Set A/D channel type result=40 07:29:44 Set A/D encoding result=40 07:29:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:44 Set channel filter=0.000000e+000 result=40 07:29:44 Config A/D Result=40 07:29:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:44 Get A/D filter: -9.255963e+061 result=40 07:29:44 Get A/D value=-858993460 result=40 07:29:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:44 Aux= 07:29:44 Message to Camera, serial 98514 queued 07:30:21 Received message from Master: op=PointingHead serial=98527 07:30:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:30:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:30:22 Point started: ret=0 07:30:22 point_skyscan result=0 07:30:22 Check angles 07:30:22 SkyScan query 07:30:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:30:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:30:23 Message to Master queued w/err=0: serial=98527 error=0 07:30:28 Received message from Master: op=Filter serial=98528 07:30:28 Color wheel filter change from 0 to 0 07:30:28 FLIGetFilterPos err=0 currentPosition=0 07:30:28 FLIGetStepsRemaining err=0 RemainingSteps=0 07:30:28 Filter is already there-color wheel unchanged 07:30:28 Received message from Master: op=Shutter serial=98529 07:30:28 Shutter LASER close 07:30:28 Received message from Camera: op=State serial=98531 07:30:28 GetSingleValue result=40 Value=cccccccc 07:30:28 SkyScan query 07:30:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:30:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:29 Parameters OK 07:30:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:29 Set A/D data flow result=40 07:30:29 Set A/D channel type result=40 07:30:29 Set A/D encoding result=40 07:30:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:29 Set channel filter=0.000000e+000 result=40 07:30:29 Config A/D Result=40 07:30:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:29 Get A/D filter: -9.255963e+061 result=40 07:30:29 Get A/D value=-858993460 result=40 07:30:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:29 Parameters OK 07:30:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:29 Set A/D data flow result=40 07:30:29 Set A/D channel type result=40 07:30:29 Set A/D encoding result=40 07:30:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:29 Set channel filter=0.000000e+000 result=40 07:30:29 Config A/D Result=40 07:30:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:29 Get A/D filter: -9.255963e+061 result=40 07:30:29 Get A/D value=-858993460 result=40 07:30:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:30:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:30:29 Aux= 07:30:29 Message to Camera, serial 98531 queued 07:31:05 Received message from Master: op=PointingHead serial=98544 07:31:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:31:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:31:06 Point started: ret=0 07:31:06 point_skyscan result=0 07:31:07 Check angles 07:31:07 SkyScan query 07:31:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:31:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:31:07 Message to Master queued w/err=0: serial=98544 error=0 07:31:12 Received message from Master: op=Filter serial=98545 07:31:12 Color wheel filter change from 0 to 0 07:31:12 FLIGetFilterPos err=0 currentPosition=0 07:31:12 FLIGetStepsRemaining err=0 RemainingSteps=0 07:31:12 Filter is already there-color wheel unchanged 07:31:12 Received message from Master: op=Shutter serial=98546 07:31:12 Shutter LASER close 07:31:12 Received message from Camera: op=State serial=98548 07:31:12 GetSingleValue result=40 Value=cccccccc 07:31:12 SkyScan query 07:31:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:31:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:13 Parameters OK 07:31:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:13 Set A/D data flow result=40 07:31:13 Set A/D channel type result=40 07:31:13 Set A/D encoding result=40 07:31:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:13 Set channel filter=0.000000e+000 result=40 07:31:13 Config A/D Result=40 07:31:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:13 Get A/D filter: -9.255963e+061 result=40 07:31:13 Get A/D value=-858993460 result=40 07:31:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:13 Parameters OK 07:31:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:13 Set A/D data flow result=40 07:31:13 Set A/D channel type result=40 07:31:13 Set A/D encoding result=40 07:31:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:13 Set channel filter=0.000000e+000 result=40 07:31:13 Config A/D Result=40 07:31:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:13 Get A/D filter: -9.255963e+061 result=40 07:31:13 Get A/D value=-858993460 result=40 07:31:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:31:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:31:13 Aux= 07:31:13 Message to Camera, serial 98548 queued 07:31:50 Received message from Master: op=PointingHead serial=98561 07:31:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:31:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:31:50 Point started: ret=0 07:31:50 point_skyscan result=0 07:31:51 Check angles 07:31:51 SkyScan query 07:31:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:31:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:31:51 Message to Master queued w/err=0: serial=98561 error=0 07:31:56 Received message from Master: op=Filter serial=98562 07:31:56 Color wheel filter change from 0 to 0 07:31:56 FLIGetFilterPos err=0 currentPosition=0 07:31:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:31:56 Filter is already there-color wheel unchanged 07:31:57 Received message from Master: op=Shutter serial=98563 07:31:57 Shutter LASER close 07:31:57 Received message from Camera: op=State serial=98565 07:31:57 GetSingleValue result=40 Value=cccccccc 07:31:57 SkyScan query 07:31:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:31:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:57 Parameters OK 07:31:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:57 Set A/D data flow result=40 07:31:57 Set A/D channel type result=40 07:31:57 Set A/D encoding result=40 07:31:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:57 Set channel filter=0.000000e+000 result=40 07:31:57 Config A/D Result=40 07:31:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:57 Get A/D filter: -9.255963e+061 result=40 07:31:57 Get A/D value=-858993460 result=40 07:31:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:57 Parameters OK 07:31:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:57 Set A/D data flow result=40 07:31:57 Set A/D channel type result=40 07:31:57 Set A/D encoding result=40 07:31:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:57 Set channel filter=0.000000e+000 result=40 07:31:57 Config A/D Result=40 07:31:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:57 Get A/D filter: -9.255963e+061 result=40 07:31:57 Get A/D value=-858993460 result=40 07:31:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:31:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:31:57 Aux= 07:31:57 Message to Camera, serial 98565 queued 07:32:34 Received message from Master: op=PointingHead serial=98578 07:32:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:32:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:32:34 Point started: ret=0 07:32:34 point_skyscan result=0 07:32:35 Check angles 07:32:35 SkyScan query 07:32:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 07:32:36 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 07:32:36 Check angles 07:32:36 SkyScan query 07:32:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-45<-15000 Statuses=0008 0009 07:32:36 Msec=750 True Az=112.995 Ze=-45 Az status=0008 Ze status=0009 07:32:37 Check angles 07:32:37 SkyScan query 07:32:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.97<-16398 Statuses=0008 0009 07:32:37 Msec=1500 True Az=112.995 Ze=-65.97 Az status=0008 Ze status=0009 07:32:37 Check angles 07:32:37 SkyScan query 07:32:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.91<-17794 Statuses=0008 0009 07:32:38 Msec=2250 True Az=112.995 Ze=-86.91 Az status=0008 Ze status=0009 07:32:38 Check angles 07:32:38 SkyScan query 07:32:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.315<-19221 Statuses=0008 0009 07:32:39 Msec=3000 True Az=112.995 Ze=-108.315 Az status=0008 Ze status=0009 07:32:39 Check angles 07:32:39 SkyScan query 07:32:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.3<-20620 Statuses=0008 0009 07:32:39 Msec=3750 True Az=112.995 Ze=-129.3 Az status=0008 Ze status=0009 07:32:40 Check angles 07:32:40 SkyScan query 07:32:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.255<-22017 Statuses=0008 0009 07:32:40 Msec=4500 True Az=112.995 Ze=-150.255 Az status=0008 Ze status=0009 07:32:40 Check angles 07:32:40 SkyScan query 07:32:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.375<-23425 Statuses=0008 0009 07:32:41 Msec=5250 True Az=112.995 Ze=-171.375 Az status=0008 Ze status=0009 07:32:41 Check angles 07:32:41 SkyScan query 07:32:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:32:42 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:32:42 Message to Master queued w/err=0: serial=98578 error=0 07:32:47 Received message from Master: op=Filter serial=98579 07:32:47 Color wheel filter change from 0 to 0 07:32:47 FLIGetFilterPos err=0 currentPosition=0 07:32:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:47 Filter is already there-color wheel unchanged 07:32:47 Received message from Master: op=Shutter serial=98580 07:32:47 Shutter LASER open 07:32:47 Received message from Camera: op=State serial=98582 07:32:47 GetSingleValue result=40 Value=cccccccc 07:32:47 SkyScan query 07:32:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:32:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:48 Parameters OK 07:32:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:48 Set A/D data flow result=40 07:32:48 Set A/D channel type result=40 07:32:48 Set A/D encoding result=40 07:32:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:48 Set channel filter=0.000000e+000 result=40 07:32:48 Config A/D Result=40 07:32:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:48 Get A/D filter: -9.255963e+061 result=40 07:32:48 Get A/D value=-858993460 result=40 07:32:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:48 Parameters OK 07:32:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:48 Set A/D data flow result=40 07:32:48 Set A/D channel type result=40 07:32:48 Set A/D encoding result=40 07:32:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:48 Set channel filter=0.000000e+000 result=40 07:32:48 Config A/D Result=40 07:32:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:48 Get A/D filter: -9.255963e+061 result=40 07:32:48 Get A/D value=-858993460 result=40 07:32:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:48 Aux= 07:32:48 Message to Camera, serial 98582 queued 07:32:55 Received message from Master: op=Shutter serial=98591 07:32:55 Shutter LASER close 07:32:56 Received message from Master: op=PointingHead serial=98595 07:32:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:32:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:32:56 Point started: ret=0 07:32:56 point_skyscan result=0 07:32:57 Check angles 07:32:57 SkyScan query 07:32:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 07:32:57 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 07:32:58 Check angles 07:32:58 SkyScan query 07:32:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.43<-20162 Statuses=0008 0009 07:32:58 Msec=750 True Az=112.995 Ze=-122.43 Az status=0008 Ze status=0009 07:32:58 Check angles 07:32:58 SkyScan query 07:32:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.445<-18763 Statuses=0008 0009 07:32:59 Msec=1500 True Az=112.995 Ze=-101.445 Az status=0008 Ze status=0009 07:32:59 Check angles 07:32:59 SkyScan query 07:33:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.475<-17365 Statuses=0008 0009 07:33:00 Msec=2250 True Az=112.995 Ze=-80.475 Az status=0008 Ze status=0009 07:33:00 Check angles 07:33:00 SkyScan query 07:33:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.1<-15940 Statuses=0008 0009 07:33:00 Msec=3000 True Az=112.995 Ze=-59.1 Az status=0008 Ze status=0009 07:33:01 Check angles 07:33:01 SkyScan query 07:33:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.68<-14512 Statuses=0008 0009 07:33:01 Msec=3750 True Az=112.995 Ze=-37.68 Az status=0008 Ze status=0009 07:33:01 Check angles 07:33:01 SkyScan query 07:33:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.74<-13116 Statuses=0008 0009 07:33:02 Msec=4500 True Az=112.995 Ze=-16.74 Az status=0008 Ze status=0009 07:33:02 Check angles 07:33:02 SkyScan query 07:33:03 SkyScan query done: ret=0 az=112.995<-7533 ze=4.2<-11720 Statuses=0008 0009 07:33:03 Msec=5250 True Az=112.995 Ze=4.2 Az status=0008 Ze status=0009 07:33:03 Check angles 07:33:03 SkyScan query 07:33:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:33:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:33:03 Message to Master queued w/err=0: serial=98595 error=0 07:33:08 Received message from Master: op=Filter serial=98596 07:33:08 Color wheel filter change from 0 to 0 07:33:08 FLIGetFilterPos err=0 currentPosition=0 07:33:08 FLIGetStepsRemaining err=0 RemainingSteps=0 07:33:08 Filter is already there-color wheel unchanged 07:33:09 Received message from Master: op=Shutter serial=98597 07:33:09 Shutter LASER close 07:33:09 Received message from Camera: op=State serial=98599 07:33:09 GetSingleValue result=40 Value=cccccccc 07:33:09 SkyScan query 07:33:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:33:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:09 Parameters OK 07:33:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:09 Set A/D data flow result=40 07:33:09 Set A/D channel type result=40 07:33:09 Set A/D encoding result=40 07:33:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:09 Set channel filter=0.000000e+000 result=40 07:33:09 Config A/D Result=40 07:33:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:09 Get A/D filter: -9.255963e+061 result=40 07:33:09 Get A/D value=-858993460 result=40 07:33:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:09 Parameters OK 07:33:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:09 Set A/D data flow result=40 07:33:09 Set A/D channel type result=40 07:33:09 Set A/D encoding result=40 07:33:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:09 Set channel filter=0.000000e+000 result=40 07:33:09 Config A/D Result=40 07:33:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:09 Get A/D filter: -9.255963e+061 result=40 07:33:09 Get A/D value=-858993460 result=40 07:33:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:33:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:33:09 Aux= 07:33:09 Message to Camera, serial 98599 queued 07:33:38 Received message from Master: op=Identify serial=98600 07:33:46 Received message from Master: op=PointingHead serial=98615 07:33:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:33:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:33:47 Point started: ret=0 07:33:47 point_skyscan result=0 07:33:47 Check angles 07:33:47 SkyScan query 07:33:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:33:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:33:48 Message to Master queued w/err=0: serial=98615 error=0 07:33:53 Received message from Master: op=Filter serial=98616 07:33:53 Color wheel filter change from 0 to 0 07:33:53 FLIGetFilterPos err=0 currentPosition=0 07:33:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:33:53 Filter is already there-color wheel unchanged 07:33:53 Received message from Master: op=Shutter serial=98617 07:33:53 Shutter LASER close 07:33:53 Received message from Camera: op=State serial=98619 07:33:53 GetSingleValue result=40 Value=cccccccc 07:33:53 SkyScan query 07:33:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:33:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:54 Parameters OK 07:33:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:54 Set A/D data flow result=40 07:33:54 Set A/D channel type result=40 07:33:54 Set A/D encoding result=40 07:33:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:54 Set channel filter=0.000000e+000 result=40 07:33:54 Config A/D Result=40 07:33:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:54 Get A/D filter: -9.255963e+061 result=40 07:33:54 Get A/D value=-858993460 result=40 07:33:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:54 Parameters OK 07:33:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:54 Set A/D data flow result=40 07:33:54 Set A/D channel type result=40 07:33:54 Set A/D encoding result=40 07:33:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:54 Set channel filter=0.000000e+000 result=40 07:33:54 Config A/D Result=40 07:33:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:54 Get A/D filter: -9.255963e+061 result=40 07:33:54 Get A/D value=-858993460 result=40 07:33:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:33:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:33:54 Aux= 07:33:54 Message to Camera, serial 98619 queued 07:34:30 Received message from Master: op=PointingHead serial=98631 07:34:30 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:34:30 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:34:30 Point started: ret=0 07:34:30 point_skyscan result=0 07:34:31 Check angles 07:34:31 SkyScan query 07:34:31 SkyScan query done: ret=0 az=135.705<-9047 ze=-6.51<-12434 Statuses=0009 0008 07:34:31 Msec=0 True Az=135.705 Ze=-6.51 Az status=0009 Ze status=0008 07:34:31 Check angles 07:34:31 SkyScan query [UTC 2019-3-4 07:34:32] 07:34:32 SkyScan query done: ret=0 az=153.555<-10237 ze=-6.495<-12433 Statuses=0009 0008 07:34:32 Msec=750 True Az=153.555 Ze=-6.495 Az status=0009 Ze status=0008 07:34:32 Check angles 07:34:32 SkyScan query 07:34:33 SkyScan query done: ret=0 az=170.97<-11398 ze=-6.495<-12433 Statuses=0009 0008 07:34:33 Msec=1500 True Az=170.97 Ze=-6.495 Az status=0009 Ze status=0008 07:34:33 Check angles 07:34:33 SkyScan query 07:34:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:34:34 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:34:34 Message to Master queued w/err=0: serial=98631 error=0 07:34:39 Received message from Master: op=Filter serial=98632 07:34:39 Color wheel filter change from 0 to 0 07:34:39 FLIGetFilterPos err=0 currentPosition=0 07:34:39 FLIGetStepsRemaining err=0 RemainingSteps=0 07:34:39 Filter is already there-color wheel unchanged 07:34:39 Received message from Master: op=Shutter serial=98633 07:34:39 Shutter LASER close 07:34:39 Received message from Camera: op=State serial=98635 07:34:39 GetSingleValue result=40 Value=cccccccc 07:34:39 SkyScan query 07:34:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:34:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:39 Parameters OK 07:34:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:39 Set A/D data flow result=40 07:34:39 Set A/D channel type result=40 07:34:39 Set A/D encoding result=40 07:34:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:39 Set channel filter=0.000000e+000 result=40 07:34:39 Config A/D Result=40 07:34:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:39 Get A/D filter: -9.255963e+061 result=40 07:34:39 Get A/D value=-858993460 result=40 07:34:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:39 Parameters OK 07:34:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:39 Set A/D data flow result=40 07:34:39 Set A/D channel type result=40 07:34:39 Set A/D encoding result=40 07:34:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:39 Set channel filter=0.000000e+000 result=40 07:34:39 Config A/D Result=40 07:34:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:39 Get A/D filter: -9.255963e+061 result=40 07:34:39 Get A/D value=-858993460 result=40 07:34:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:34:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:34:39 Aux= 07:34:39 Message to Camera, serial 98635 queued 07:35:16 Received message from Master: op=PointingHead serial=98648 07:35:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:35:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:35:17 Point started: ret=0 07:35:17 point_skyscan result=0 07:35:17 Check angles 07:35:17 SkyScan query 07:35:18 SkyScan query done: ret=0 az=152.85<-10190 ze=6.51<-11566 Statuses=0009 0008 07:35:18 Msec=0 True Az=152.85 Ze=6.51 Az status=0009 Ze status=0008 07:35:18 Check angles 07:35:18 SkyScan query 07:35:19 SkyScan query done: ret=0 az=135.315<-9021 ze=6.495<-11567 Statuses=0009 0008 07:35:19 Msec=750 True Az=135.315 Ze=6.495 Az status=0009 Ze status=0008 07:35:19 Check angles 07:35:19 SkyScan query 07:35:19 SkyScan query done: ret=0 az=117.615<-7841 ze=6.495<-11567 Statuses=0009 0008 07:35:19 Msec=1500 True Az=117.615 Ze=6.495 Az status=0009 Ze status=0008 07:35:20 Check angles 07:35:20 SkyScan query 07:35:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:35:20 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:35:20 Message to Master queued w/err=0: serial=98648 error=0 07:35:25 Received message from Master: op=Filter serial=98649 07:35:25 Color wheel filter change from 0 to 0 07:35:25 FLIGetFilterPos err=0 currentPosition=0 07:35:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:35:25 Filter is already there-color wheel unchanged 07:35:25 Received message from Master: op=Shutter serial=98650 07:35:25 Shutter LASER close 07:35:25 Received message from Camera: op=State serial=98652 07:35:25 GetSingleValue result=40 Value=cccccccc 07:35:25 SkyScan query 07:35:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:35:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:26 Parameters OK 07:35:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:26 Set A/D data flow result=40 07:35:26 Set A/D channel type result=40 07:35:26 Set A/D encoding result=40 07:35:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:26 Set channel filter=0.000000e+000 result=40 07:35:26 Config A/D Result=40 07:35:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:26 Get A/D filter: -9.255963e+061 result=40 07:35:26 Get A/D value=-858993460 result=40 07:35:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:26 Parameters OK 07:35:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:26 Set A/D data flow result=40 07:35:26 Set A/D channel type result=40 07:35:26 Set A/D encoding result=40 07:35:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:26 Set channel filter=0.000000e+000 result=40 07:35:26 Config A/D Result=40 07:35:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:26 Get A/D filter: -9.255963e+061 result=40 07:35:26 Get A/D value=-858993460 result=40 07:35:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:35:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:35:26 Aux= 07:35:26 Message to Camera, serial 98652 queued 07:36:03 Received message from Master: op=PointingHead serial=98665 07:36:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:36:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:36:03 Point started: ret=0 07:36:03 point_skyscan result=0 07:36:04 Check angles 07:36:04 SkyScan query 07:36:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.995<-13533 Statuses=0008 0009 07:36:04 Msec=0 True Az=112.995 Ze=-22.995 Az status=0008 Ze status=0009 07:36:05 Check angles 07:36:05 SkyScan query 07:36:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.025<-14935 Statuses=0008 0009 07:36:05 Msec=750 True Az=112.995 Ze=-44.025 Az status=0008 Ze status=0009 07:36:05 Check angles 07:36:05 SkyScan query 07:36:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.95<-16330 Statuses=0008 0009 07:36:06 Msec=1500 True Az=112.995 Ze=-64.95 Az status=0008 Ze status=0009 07:36:06 Check angles 07:36:06 SkyScan query 07:36:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.95<-17730 Statuses=0008 0009 07:36:07 Msec=2250 True Az=112.995 Ze=-85.95 Az status=0008 Ze status=0009 07:36:07 Check angles 07:36:07 SkyScan query 07:36:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.25<-19150 Statuses=0008 0009 07:36:07 Msec=3000 True Az=112.995 Ze=-107.25 Az status=0008 Ze status=0009 07:36:08 Check angles 07:36:08 SkyScan query 07:36:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.19<-20546 Statuses=0008 0009 07:36:08 Msec=3750 True Az=112.995 Ze=-128.19 Az status=0008 Ze status=0009 07:36:08 Check angles 07:36:08 SkyScan query 07:36:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.16<-21944 Statuses=0008 0009 07:36:09 Msec=4500 True Az=112.995 Ze=-149.16 Az status=0008 Ze status=0009 07:36:09 Check angles 07:36:09 SkyScan query 07:36:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.535<-23369 Statuses=0008 0009 07:36:10 Msec=5250 True Az=112.995 Ze=-170.535 Az status=0008 Ze status=0009 07:36:10 Check angles 07:36:10 SkyScan query 07:36:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:36:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:36:10 Message to Master queued w/err=0: serial=98665 error=0 07:36:15 Received message from Master: op=Filter serial=98666 07:36:15 Color wheel filter change from 0 to 0 07:36:15 FLIGetFilterPos err=0 currentPosition=0 07:36:15 FLIGetStepsRemaining err=0 RemainingSteps=0 07:36:15 Filter is already there-color wheel unchanged 07:36:16 Received message from Master: op=Shutter serial=98667 07:36:16 Shutter LASER open 07:36:16 Received message from Camera: op=State serial=98669 07:36:16 GetSingleValue result=40 Value=cccccccc 07:36:16 SkyScan query 07:36:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:36:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:16 Parameters OK 07:36:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:16 Set A/D data flow result=40 07:36:16 Set A/D channel type result=40 07:36:16 Set A/D encoding result=40 07:36:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:16 Set channel filter=0.000000e+000 result=40 07:36:16 Config A/D Result=40 07:36:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:16 Get A/D filter: -9.255963e+061 result=40 07:36:16 Get A/D value=-858993460 result=40 07:36:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:16 Parameters OK 07:36:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:16 Set A/D data flow result=40 07:36:16 Set A/D channel type result=40 07:36:16 Set A/D encoding result=40 07:36:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:16 Set channel filter=0.000000e+000 result=40 07:36:16 Config A/D Result=40 07:36:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:16 Get A/D filter: -9.255963e+061 result=40 07:36:16 Get A/D value=-858993460 result=40 07:36:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:36:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:36:16 Aux= 07:36:16 Message to Camera, serial 98669 queued 07:36:25 Received message from Master: op=Shutter serial=98679 07:36:25 Shutter LASER close 07:36:25 Received message from Master: op=PointingHead serial=98683 07:36:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:36:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:36:26 Point started: ret=0 07:36:26 point_skyscan result=0 07:36:26 Check angles 07:36:26 SkyScan query 07:36:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.98<-21532 Statuses=0008 0009 07:36:27 Msec=0 True Az=112.995 Ze=-142.98 Az status=0008 Ze status=0009 07:36:27 Check angles 07:36:27 SkyScan query 07:36:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.545<-20103 Statuses=0008 0009 07:36:28 Msec=750 True Az=112.995 Ze=-121.545 Az status=0008 Ze status=0009 07:36:28 Check angles 07:36:28 SkyScan query 07:36:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.635<-18709 Statuses=0008 0009 07:36:28 Msec=1500 True Az=112.995 Ze=-100.635 Az status=0008 Ze status=0009 07:36:29 Check angles 07:36:29 SkyScan query 07:36:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.65<-17310 Statuses=0008 0009 07:36:29 Msec=2250 True Az=112.995 Ze=-79.65 Az status=0008 Ze status=0009 07:36:29 Check angles 07:36:29 SkyScan query 07:36:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.26<-15884 Statuses=0008 0009 07:36:30 Msec=3000 True Az=112.995 Ze=-58.26 Az status=0008 Ze status=0009 07:36:30 Check angles 07:36:30 SkyScan query 07:36:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.35<-14490 Statuses=0008 0009 07:36:31 Msec=3750 True Az=112.995 Ze=-37.35 Az status=0008 Ze status=0009 07:36:31 Check angles 07:36:31 SkyScan query 07:36:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.38<-13092 Statuses=0008 0009 07:36:31 Msec=4500 True Az=112.995 Ze=-16.38 Az status=0008 Ze status=0009 07:36:32 Check angles 07:36:32 SkyScan query 07:36:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.785<-11681 Statuses=0008 0009 07:36:32 Msec=5250 True Az=112.995 Ze=4.785 Az status=0008 Ze status=0009 07:36:32 Check angles 07:36:32 SkyScan query 07:36:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:36:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:36:33 Message to Master queued w/err=0: serial=98683 error=0 07:36:38 Received message from Master: op=Filter serial=98684 07:36:38 Color wheel filter change from 0 to 0 07:36:38 FLIGetFilterPos err=0 currentPosition=0 07:36:38 FLIGetStepsRemaining err=0 RemainingSteps=0 07:36:38 Filter is already there-color wheel unchanged 07:36:38 Received message from Master: op=Shutter serial=98685 07:36:38 Shutter LASER close 07:36:38 Received message from Camera: op=State serial=98687 07:36:38 GetSingleValue result=40 Value=cccccccc 07:36:38 SkyScan query 07:36:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:36:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:39 Parameters OK 07:36:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:39 Set A/D data flow result=40 07:36:39 Set A/D channel type result=40 07:36:39 Set A/D encoding result=40 07:36:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:39 Set channel filter=0.000000e+000 result=40 07:36:39 Config A/D Result=40 07:36:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:39 Get A/D filter: -9.255963e+061 result=40 07:36:39 Get A/D value=-858993460 result=40 07:36:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:39 Parameters OK 07:36:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:39 Set A/D data flow result=40 07:36:39 Set A/D channel type result=40 07:36:39 Set A/D encoding result=40 07:36:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:39 Set channel filter=0.000000e+000 result=40 07:36:39 Config A/D Result=40 07:36:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:39 Get A/D filter: -9.255963e+061 result=40 07:36:39 Get A/D value=-858993460 result=40 07:36:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:36:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:36:39 Aux= 07:36:39 Message to Camera, serial 98687 queued 07:37:16 Received message from Master: op=PointingHead serial=98700 07:37:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:37:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:37:16 Point started: ret=0 07:37:16 point_skyscan result=0 07:37:17 Check angles 07:37:17 SkyScan query 07:37:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:37:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:37:17 Message to Master queued w/err=0: serial=98700 error=0 07:37:22 Received message from Master: op=Filter serial=98701 07:37:22 Color wheel filter change from 0 to 0 07:37:22 FLIGetFilterPos err=0 currentPosition=0 07:37:22 FLIGetStepsRemaining err=0 RemainingSteps=0 07:37:22 Filter is already there-color wheel unchanged 07:37:23 Received message from Master: op=Shutter serial=98702 07:37:23 Shutter LASER close 07:37:23 Received message from Camera: op=State serial=98704 07:37:23 GetSingleValue result=40 Value=cccccccc 07:37:23 SkyScan query 07:37:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:37:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:23 Parameters OK 07:37:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:23 Set A/D data flow result=40 07:37:23 Set A/D channel type result=40 07:37:23 Set A/D encoding result=40 07:37:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:23 Set channel filter=0.000000e+000 result=40 07:37:23 Config A/D Result=40 07:37:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:23 Get A/D filter: -9.255963e+061 result=40 07:37:23 Get A/D value=-858993460 result=40 07:37:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:23 Parameters OK 07:37:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:23 Set A/D data flow result=40 07:37:23 Set A/D channel type result=40 07:37:23 Set A/D encoding result=40 07:37:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:23 Set channel filter=0.000000e+000 result=40 07:37:23 Config A/D Result=40 07:37:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:23 Get A/D filter: -9.255963e+061 result=40 07:37:23 Get A/D value=-858993460 result=40 07:37:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:37:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:37:23 Aux= 07:37:23 Message to Camera, serial 98704 queued 07:38:00 Received message from Master: op=PointingHead serial=98717 07:38:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:38:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:38:00 Point started: ret=0 07:38:00 point_skyscan result=0 07:38:01 Check angles 07:38:01 SkyScan query 07:38:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:38:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:38:02 Message to Master queued w/err=0: serial=98717 error=0 07:38:07 Received message from Master: op=Filter serial=98718 07:38:07 Color wheel filter change from 0 to 0 07:38:07 FLIGetFilterPos err=0 currentPosition=0 07:38:07 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:07 Filter is already there-color wheel unchanged 07:38:07 Received message from Master: op=Shutter serial=98719 07:38:07 Shutter LASER close 07:38:07 Received message from Camera: op=State serial=98721 07:38:07 GetSingleValue result=40 Value=cccccccc 07:38:07 SkyScan query 07:38:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:38:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:07 Parameters OK 07:38:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:07 Set A/D data flow result=40 07:38:07 Set A/D channel type result=40 07:38:07 Set A/D encoding result=40 07:38:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:07 Set channel filter=0.000000e+000 result=40 07:38:07 Config A/D Result=40 07:38:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:07 Get A/D filter: -9.255963e+061 result=40 07:38:07 Get A/D value=-858993460 result=40 07:38:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:07 Parameters OK 07:38:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:07 Set A/D data flow result=40 07:38:07 Set A/D channel type result=40 07:38:07 Set A/D encoding result=40 07:38:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:07 Set channel filter=0.000000e+000 result=40 07:38:07 Config A/D Result=40 07:38:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:07 Get A/D filter: -9.255963e+061 result=40 07:38:07 Get A/D value=-858993460 result=40 07:38:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:07 Aux= 07:38:07 Message to Camera, serial 98721 queued 07:38:44 Received message from Master: op=PointingHead serial=98734 07:38:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:38:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:38:45 Point started: ret=0 07:38:45 point_skyscan result=0 07:38:45 Check angles 07:38:45 SkyScan query 07:38:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:38:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:38:46 Message to Master queued w/err=0: serial=98734 error=0 07:38:51 Received message from Master: op=Filter serial=98735 07:38:51 Color wheel filter change from 0 to 0 07:38:51 FLIGetFilterPos err=0 currentPosition=0 07:38:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:51 Filter is already there-color wheel unchanged 07:38:51 Received message from Master: op=Shutter serial=98736 07:38:51 Shutter LASER close 07:38:51 Received message from Camera: op=State serial=98738 07:38:51 GetSingleValue result=40 Value=cccccccc 07:38:51 SkyScan query 07:38:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:38:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:52 Parameters OK 07:38:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:52 Set A/D data flow result=40 07:38:52 Set A/D channel type result=40 07:38:52 Set A/D encoding result=40 07:38:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:52 Set channel filter=0.000000e+000 result=40 07:38:52 Config A/D Result=40 07:38:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:52 Get A/D filter: -9.255963e+061 result=40 07:38:52 Get A/D value=-858993460 result=40 07:38:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:52 Parameters OK 07:38:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:52 Set A/D data flow result=40 07:38:52 Set A/D channel type result=40 07:38:52 Set A/D encoding result=40 07:38:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:52 Set channel filter=0.000000e+000 result=40 07:38:52 Config A/D Result=40 07:38:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:52 Get A/D filter: -9.255963e+061 result=40 07:38:52 Get A/D value=-858993460 result=40 07:38:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:52 Aux= 07:38:52 Message to Camera, serial 98738 queued 07:39:28 Received message from Master: op=PointingHead serial=98750 07:39:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:39:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:39:28 Point started: ret=0 07:39:28 point_skyscan result=0 07:39:29 Check angles 07:39:29 SkyScan query 07:39:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 07:39:29 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 07:39:30 Check angles 07:39:30 SkyScan query 07:39:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.37<-14958 Statuses=0008 0009 07:39:30 Msec=750 True Az=112.995 Ze=-44.37 Az status=0008 Ze status=0009 07:39:30 Check angles 07:39:30 SkyScan query 07:39:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.715<-16381 Statuses=0008 0009 07:39:31 Msec=1500 True Az=112.995 Ze=-65.715 Az status=0008 Ze status=0009 07:39:31 Check angles 07:39:31 SkyScan query 07:39:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.655<-17777 Statuses=0008 0009 07:39:32 Msec=2250 True Az=112.995 Ze=-86.655 Az status=0008 Ze status=0009 07:39:32 Check angles 07:39:32 SkyScan query 07:39:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 07:39:32 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 07:39:33 Check angles 07:39:33 SkyScan query 07:39:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.015<-20601 Statuses=0008 0009 07:39:33 Msec=3750 True Az=112.995 Ze=-129.015 Az status=0008 Ze status=0009 07:39:33 Check angles 07:39:33 SkyScan query 07:39:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-150<-22000 Statuses=0008 0009 07:39:34 Msec=4500 True Az=112.995 Ze=-150 Az status=0008 Ze status=0009 07:39:34 Check angles 07:39:34 SkyScan query 07:39:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.85<-23390 Statuses=0008 0009 07:39:35 Msec=5250 True Az=112.995 Ze=-170.85 Az status=0008 Ze status=0009 07:39:35 Check angles 07:39:35 SkyScan query 07:39:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:39:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:39:35 Message to Master queued w/err=0: serial=98750 error=0 07:39:40 Received message from Master: op=Filter serial=98751 07:39:40 Color wheel filter change from 0 to 0 07:39:40 FLIGetFilterPos err=0 currentPosition=0 07:39:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:39:40 Filter is already there-color wheel unchanged 07:39:41 Received message from Master: op=Shutter serial=98752 07:39:41 Shutter LASER open 07:39:41 Received message from Camera: op=State serial=98754 07:39:41 GetSingleValue result=40 Value=cccccccc 07:39:41 SkyScan query 07:39:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:39:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:41 Parameters OK 07:39:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:41 Set A/D data flow result=40 07:39:41 Set A/D channel type result=40 07:39:41 Set A/D encoding result=40 07:39:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:41 Set channel filter=0.000000e+000 result=40 07:39:41 Config A/D Result=40 07:39:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:41 Get A/D filter: -9.255963e+061 result=40 07:39:41 Get A/D value=-858993460 result=40 07:39:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:41 Parameters OK 07:39:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:41 Set A/D data flow result=40 07:39:41 Set A/D channel type result=40 07:39:41 Set A/D encoding result=40 07:39:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:41 Set channel filter=0.000000e+000 result=40 07:39:41 Config A/D Result=40 07:39:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:41 Get A/D filter: -9.255963e+061 result=40 07:39:41 Get A/D value=-858993460 result=40 07:39:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:39:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:39:41 Aux= 07:39:41 Message to Camera, serial 98754 queued 07:39:50 Received message from Master: op=Shutter serial=98764 07:39:50 Shutter LASER close 07:39:50 Received message from Master: op=PointingHead serial=98768 07:39:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:39:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:39:51 Point started: ret=0 07:39:51 point_skyscan result=0 07:39:51 Check angles 07:39:51 SkyScan query 07:39:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 07:39:52 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 07:39:52 Check angles 07:39:52 SkyScan query 07:39:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.4<-20160 Statuses=0008 0009 07:39:53 Msec=750 True Az=112.995 Ze=-122.4 Az status=0008 Ze status=0009 07:39:53 Check angles 07:39:53 SkyScan query 07:39:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.43<-18762 Statuses=0008 0009 07:39:53 Msec=1500 True Az=112.995 Ze=-101.43 Az status=0008 Ze status=0009 07:39:54 Check angles 07:39:54 SkyScan query 07:39:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.445<-17363 Statuses=0008 0009 07:39:54 Msec=2250 True Az=112.995 Ze=-80.445 Az status=0008 Ze status=0009 07:39:54 Check angles 07:39:54 SkyScan query 07:39:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.085<-15939 Statuses=0008 0009 07:39:55 Msec=3000 True Az=112.995 Ze=-59.085 Az status=0008 Ze status=0009 07:39:55 Check angles 07:39:55 SkyScan query 07:39:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.07<-14538 Statuses=0008 0009 07:39:56 Msec=3750 True Az=112.995 Ze=-38.07 Az status=0008 Ze status=0009 07:39:56 Check angles 07:39:56 SkyScan query 07:39:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.145<-13143 Statuses=0008 0009 07:39:56 Msec=4500 True Az=112.995 Ze=-17.145 Az status=0008 Ze status=0009 07:39:57 Check angles 07:39:57 SkyScan query 07:39:57 SkyScan query done: ret=0 az=112.995<-7533 ze=4.215<-11719 Statuses=0008 0009 07:39:57 Msec=5250 True Az=112.995 Ze=4.215 Az status=0008 Ze status=0009 07:39:57 Check angles 07:39:57 SkyScan query 07:39:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:39:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:39:58 Message to Master queued w/err=0: serial=98768 error=0 07:40:03 Received message from Master: op=Filter serial=98769 07:40:03 Color wheel filter change from 0 to 0 07:40:03 FLIGetFilterPos err=0 currentPosition=0 07:40:03 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:03 Filter is already there-color wheel unchanged 07:40:03 Received message from Master: op=Shutter serial=98770 07:40:03 Shutter LASER close 07:40:03 Received message from Camera: op=State serial=98772 07:40:03 GetSingleValue result=40 Value=cccccccc 07:40:03 SkyScan query 07:40:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:40:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:04 Parameters OK 07:40:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:04 Set A/D data flow result=40 07:40:04 Set A/D channel type result=40 07:40:04 Set A/D encoding result=40 07:40:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:04 Set channel filter=0.000000e+000 result=40 07:40:04 Config A/D Result=40 07:40:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:04 Get A/D filter: -9.255963e+061 result=40 07:40:04 Get A/D value=-858993460 result=40 07:40:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:04 Parameters OK 07:40:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:04 Set A/D data flow result=40 07:40:04 Set A/D channel type result=40 07:40:04 Set A/D encoding result=40 07:40:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:04 Set channel filter=0.000000e+000 result=40 07:40:04 Config A/D Result=40 07:40:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:04 Get A/D filter: -9.255963e+061 result=40 07:40:04 Get A/D value=-858993460 result=40 07:40:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:04 Aux= 07:40:04 Message to Camera, serial 98772 queued 07:40:41 Received message from Master: op=PointingHead serial=98785 07:40:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:40:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:40:41 Point started: ret=0 07:40:41 point_skyscan result=0 07:40:42 Check angles 07:40:42 SkyScan query 07:40:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:40:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:40:42 Message to Master queued w/err=0: serial=98785 error=0 07:40:47 Received message from Master: op=Filter serial=98786 07:40:47 Color wheel filter change from 0 to 0 07:40:47 FLIGetFilterPos err=0 currentPosition=0 07:40:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:47 Filter is already there-color wheel unchanged 07:40:48 Received message from Master: op=Shutter serial=98787 07:40:48 Shutter LASER close 07:40:48 Received message from Camera: op=State serial=98789 07:40:48 GetSingleValue result=40 Value=cccccccc 07:40:48 SkyScan query 07:40:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:40:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:48 Parameters OK 07:40:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:48 Set A/D data flow result=40 07:40:48 Set A/D channel type result=40 07:40:48 Set A/D encoding result=40 07:40:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:48 Set channel filter=0.000000e+000 result=40 07:40:48 Config A/D Result=40 07:40:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:48 Get A/D filter: -9.255963e+061 result=40 07:40:48 Get A/D value=-858993460 result=40 07:40:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:48 Parameters OK 07:40:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:48 Set A/D data flow result=40 07:40:48 Set A/D channel type result=40 07:40:48 Set A/D encoding result=40 07:40:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:48 Set channel filter=0.000000e+000 result=40 07:40:48 Config A/D Result=40 07:40:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:48 Get A/D filter: -9.255963e+061 result=40 07:40:48 Get A/D value=-858993460 result=40 07:40:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:48 Aux= 07:40:48 Message to Camera, serial 98789 queued 07:41:25 Received message from Master: op=PointingHead serial=98802 07:41:25 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:41:25 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:41:25 Point started: ret=0 07:41:25 point_skyscan result=0 07:41:26 Check angles 07:41:26 SkyScan query 07:41:27 SkyScan query done: ret=0 az=136.395<-9093 ze=-6.51<-12434 Statuses=0009 0008 07:41:27 Msec=0 True Az=136.395 Ze=-6.51 Az status=0009 Ze status=0008 07:41:27 Check angles 07:41:27 SkyScan query 07:41:28 SkyScan query done: ret=0 az=153.945<-10263 ze=-6.51<-12434 Statuses=0009 0008 07:41:28 Msec=750 True Az=153.945 Ze=-6.51 Az status=0009 Ze status=0008 07:41:28 Check angles 07:41:28 SkyScan query 07:41:28 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 07:41:28 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 07:41:28 Check angles 07:41:28 SkyScan query 07:41:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:41:29 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:41:29 Message to Master queued w/err=0: serial=98802 error=0 07:41:34 Received message from Master: op=Filter serial=98803 07:41:34 Color wheel filter change from 0 to 0 07:41:34 FLIGetFilterPos err=0 currentPosition=0 07:41:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:41:34 Filter is already there-color wheel unchanged 07:41:34 Received message from Master: op=Shutter serial=98804 07:41:34 Shutter LASER close 07:41:34 Received message from Camera: op=State serial=98806 07:41:34 GetSingleValue result=40 Value=cccccccc 07:41:34 SkyScan query 07:41:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:41:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:35 Parameters OK 07:41:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:35 Set A/D data flow result=40 07:41:35 Set A/D channel type result=40 07:41:35 Set A/D encoding result=40 07:41:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:35 Set channel filter=0.000000e+000 result=40 07:41:35 Config A/D Result=40 07:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:35 Get A/D filter: -9.255963e+061 result=40 07:41:35 Get A/D value=-858993460 result=40 07:41:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:35 Parameters OK 07:41:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:35 Set A/D data flow result=40 07:41:35 Set A/D channel type result=40 07:41:35 Set A/D encoding result=40 07:41:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:35 Set channel filter=0.000000e+000 result=40 07:41:35 Config A/D Result=40 07:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:35 Get A/D filter: -9.255963e+061 result=40 07:41:35 Get A/D value=-858993460 result=40 07:41:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:41:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:41:35 Aux= 07:41:35 Message to Camera, serial 98806 queued 07:42:12 Received message from Master: op=PointingHead serial=98819 07:42:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:42:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:42:12 Point started: ret=0 07:42:12 point_skyscan result=0 07:42:13 Check angles 07:42:13 SkyScan query 07:42:13 SkyScan query done: ret=0 az=152.745<-10183 ze=6.51<-11566 Statuses=0009 0008 07:42:13 Msec=0 True Az=152.745 Ze=6.51 Az status=0009 Ze status=0008 07:42:14 Check angles 07:42:14 SkyScan query 07:42:14 SkyScan query done: ret=0 az=134.88<-8992 ze=6.495<-11567 Statuses=0009 0008 07:42:14 Msec=750 True Az=134.88 Ze=6.495 Az status=0009 Ze status=0008 07:42:14 Check angles 07:42:14 SkyScan query 07:42:15 SkyScan query done: ret=0 az=117.03<-7802 ze=6.495<-11567 Statuses=0009 0008 07:42:15 Msec=1500 True Az=117.03 Ze=6.495 Az status=0009 Ze status=0008 07:42:15 Check angles 07:42:15 SkyScan query 07:42:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:42:16 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:42:16 Message to Master queued w/err=0: serial=98819 error=0 07:42:21 Received message from Master: op=Filter serial=98820 07:42:21 Color wheel filter change from 0 to 0 07:42:21 FLIGetFilterPos err=0 currentPosition=0 07:42:21 FLIGetStepsRemaining err=0 RemainingSteps=0 07:42:21 Filter is already there-color wheel unchanged 07:42:21 Received message from Master: op=Shutter serial=98821 07:42:21 Shutter LASER close 07:42:21 Received message from Camera: op=State serial=98823 07:42:21 GetSingleValue result=40 Value=cccccccc 07:42:21 SkyScan query 07:42:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:42:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:21 Parameters OK 07:42:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:21 Set A/D data flow result=40 07:42:21 Set A/D channel type result=40 07:42:21 Set A/D encoding result=40 07:42:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:21 Set channel filter=0.000000e+000 result=40 07:42:21 Config A/D Result=40 07:42:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:21 Get A/D filter: -9.255963e+061 result=40 07:42:21 Get A/D value=-858993460 result=40 07:42:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:21 Parameters OK 07:42:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:21 Set A/D data flow result=40 07:42:21 Set A/D channel type result=40 07:42:21 Set A/D encoding result=40 07:42:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:21 Set channel filter=0.000000e+000 result=40 07:42:21 Config A/D Result=40 07:42:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:21 Get A/D filter: -9.255963e+061 result=40 07:42:21 Get A/D value=-858993460 result=40 07:42:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:42:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:42:21 Aux= 07:42:21 Message to Camera, serial 98823 queued 07:42:58 Received message from Master: op=PointingHead serial=98836 07:42:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:42:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:42:59 Point started: ret=0 07:42:59 point_skyscan result=0 07:42:59 Check angles 07:42:59 SkyScan query 07:43:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 07:43:00 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 07:43:00 Check angles 07:43:00 SkyScan query 07:43:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.58<-14972 Statuses=0008 0009 07:43:01 Msec=750 True Az=112.995 Ze=-44.58 Az status=0008 Ze status=0009 07:43:01 Check angles 07:43:01 SkyScan query 07:43:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 07:43:01 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 07:43:02 Check angles 07:43:02 SkyScan query 07:43:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.43<-17762 Statuses=0008 0009 07:43:02 Msec=2250 True Az=112.995 Ze=-86.43 Az status=0008 Ze status=0009 07:43:02 Check angles 07:43:02 SkyScan query 07:43:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 07:43:03 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 07:43:03 Check angles 07:43:03 SkyScan query 07:43:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.325<-20555 Statuses=0008 0009 07:43:04 Msec=3750 True Az=112.995 Ze=-128.325 Az status=0008 Ze status=0009 07:43:04 Check angles 07:43:04 SkyScan query 07:43:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.31<-21954 Statuses=0008 0009 07:43:04 Msec=4500 True Az=112.995 Ze=-149.31 Az status=0008 Ze status=0009 07:43:05 Check angles 07:43:05 SkyScan query 07:43:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.25<-23350 Statuses=0008 0009 07:43:05 Msec=5250 True Az=112.995 Ze=-170.25 Az status=0008 Ze status=0009 07:43:05 Check angles 07:43:05 SkyScan query 07:43:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:43:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:43:06 Message to Master queued w/err=0: serial=98836 error=0 07:43:11 Received message from Master: op=Filter serial=98837 07:43:11 Color wheel filter change from 0 to 0 07:43:11 FLIGetFilterPos err=0 currentPosition=0 07:43:11 FLIGetStepsRemaining err=0 RemainingSteps=0 07:43:11 Filter is already there-color wheel unchanged 07:43:11 Received message from Master: op=Shutter serial=98838 07:43:11 Shutter LASER open 07:43:11 Received message from Camera: op=State serial=98840 07:43:11 GetSingleValue result=40 Value=cccccccc 07:43:11 SkyScan query 07:43:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:43:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:12 Parameters OK 07:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:12 Set A/D data flow result=40 07:43:12 Set A/D channel type result=40 07:43:12 Set A/D encoding result=40 07:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:12 Set channel filter=0.000000e+000 result=40 07:43:12 Config A/D Result=40 07:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:12 Get A/D filter: -9.255963e+061 result=40 07:43:12 Get A/D value=-858993460 result=40 07:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:12 Parameters OK 07:43:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:12 Set A/D data flow result=40 07:43:12 Set A/D channel type result=40 07:43:12 Set A/D encoding result=40 07:43:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:12 Set channel filter=0.000000e+000 result=40 07:43:12 Config A/D Result=40 07:43:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:12 Get A/D filter: -9.255963e+061 result=40 07:43:12 Get A/D value=-858993460 result=40 07:43:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:43:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:43:12 Aux= 07:43:12 Message to Camera, serial 98840 queued 07:43:20 Received message from Master: op=Shutter serial=98850 07:43:20 Shutter LASER close 07:43:21 Received message from Master: op=PointingHead serial=98854 07:43:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:43:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:43:21 Point started: ret=0 07:43:21 point_skyscan result=0 07:43:22 Check angles 07:43:22 SkyScan query 07:43:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.04<-21536 Statuses=0008 0009 07:43:22 Msec=0 True Az=112.995 Ze=-143.04 Az status=0008 Ze status=0009 07:43:23 Check angles 07:43:23 SkyScan query 07:43:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 07:43:23 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 07:43:23 Check angles 07:43:23 SkyScan query 07:43:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 07:43:24 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 07:43:24 Check angles 07:43:24 SkyScan query 07:43:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.16<-17344 Statuses=0008 0009 07:43:25 Msec=2250 True Az=112.995 Ze=-80.16 Az status=0008 Ze status=0009 07:43:25 Check angles 07:43:25 SkyScan query 07:43:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 07:43:25 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 07:43:26 Check angles 07:43:26 SkyScan query 07:43:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.77<-14518 Statuses=0008 0009 07:43:26 Msec=3750 True Az=112.995 Ze=-37.77 Az status=0008 Ze status=0009 07:43:26 Check angles 07:43:26 SkyScan query 07:43:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.845<-13123 Statuses=0008 0009 07:43:27 Msec=4500 True Az=112.995 Ze=-16.845 Az status=0008 Ze status=0009 07:43:27 Check angles 07:43:27 SkyScan query 07:43:28 SkyScan query done: ret=0 az=112.995<-7533 ze=4.11<-11726 Statuses=0008 0009 07:43:28 Msec=5250 True Az=112.995 Ze=4.11 Az status=0008 Ze status=0009 07:43:28 Check angles 07:43:28 SkyScan query 07:43:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:43:29 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:43:29 Message to Master queued w/err=0: serial=98854 error=0 07:43:34 Received message from Master: op=Filter serial=98855 07:43:34 Color wheel filter change from 0 to 0 07:43:34 FLIGetFilterPos err=0 currentPosition=0 07:43:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:43:34 Filter is already there-color wheel unchanged 07:43:34 Received message from Master: op=Shutter serial=98856 07:43:34 Shutter LASER close 07:43:34 Received message from Camera: op=State serial=98858 07:43:34 GetSingleValue result=40 Value=cccccccc 07:43:34 SkyScan query 07:43:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:43:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:34 Parameters OK 07:43:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:34 Set A/D data flow result=40 07:43:34 Set A/D channel type result=40 07:43:34 Set A/D encoding result=40 07:43:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:34 Set channel filter=0.000000e+000 result=40 07:43:34 Config A/D Result=40 07:43:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:34 Get A/D filter: -9.255963e+061 result=40 07:43:34 Get A/D value=-858993460 result=40 07:43:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:34 Parameters OK 07:43:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:34 Set A/D data flow result=40 07:43:34 Set A/D channel type result=40 07:43:34 Set A/D encoding result=40 07:43:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:34 Set channel filter=0.000000e+000 result=40 07:43:34 Config A/D Result=40 07:43:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:34 Get A/D filter: -9.255963e+061 result=40 07:43:34 Get A/D value=-858993460 result=40 07:43:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:43:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:43:34 Aux= 07:43:34 Message to Camera, serial 98858 queued [UTC 2019-3-4 07:43:50] 07:44:11 Received message from Master: op=PointingHead serial=98871 07:44:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:44:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:44:12 Point started: ret=0 07:44:12 point_skyscan result=0 07:44:12 Check angles 07:44:12 SkyScan query 07:44:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:44:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:44:13 Message to Master queued w/err=0: serial=98871 error=0 07:44:18 Received message from Master: op=Filter serial=98872 07:44:18 Color wheel filter change from 0 to 0 07:44:18 FLIGetFilterPos err=0 currentPosition=0 07:44:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:44:18 Filter is already there-color wheel unchanged 07:44:18 Received message from Master: op=Shutter serial=98873 07:44:18 Shutter LASER close 07:44:18 Received message from Camera: op=State serial=98875 07:44:18 GetSingleValue result=40 Value=cccccccc 07:44:18 SkyScan query 07:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:44:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:19 Parameters OK 07:44:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:19 Set A/D data flow result=40 07:44:19 Set A/D channel type result=40 07:44:19 Set A/D encoding result=40 07:44:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:19 Set channel filter=0.000000e+000 result=40 07:44:19 Config A/D Result=40 07:44:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:19 Get A/D filter: -9.255963e+061 result=40 07:44:19 Get A/D value=-858993460 result=40 07:44:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:19 Parameters OK 07:44:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:19 Set A/D data flow result=40 07:44:19 Set A/D channel type result=40 07:44:19 Set A/D encoding result=40 07:44:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:19 Set channel filter=0.000000e+000 result=40 07:44:19 Config A/D Result=40 07:44:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:19 Get A/D filter: -9.255963e+061 result=40 07:44:19 Get A/D value=-858993460 result=40 07:44:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:44:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:44:19 Aux= 07:44:19 Message to Camera, serial 98875 queued 07:44:56 Received message from Master: op=PointingHead serial=98888 07:44:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:44:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:44:56 Point started: ret=0 07:44:56 point_skyscan result=0 07:44:57 Check angles 07:44:57 SkyScan query 07:44:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:44:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:44:57 Message to Master queued w/err=0: serial=98888 error=0 07:45:02 Received message from Master: op=Filter serial=98889 07:45:02 Color wheel filter change from 0 to 0 07:45:02 FLIGetFilterPos err=0 currentPosition=0 07:45:02 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:02 Filter is already there-color wheel unchanged 07:45:02 Received message from Master: op=Shutter serial=98890 07:45:02 Shutter LASER close 07:45:02 Received message from Camera: op=State serial=98892 07:45:02 GetSingleValue result=40 Value=cccccccc 07:45:02 SkyScan query 07:45:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:45:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:03 Parameters OK 07:45:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:03 Set A/D data flow result=40 07:45:03 Set A/D channel type result=40 07:45:03 Set A/D encoding result=40 07:45:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:03 Set channel filter=0.000000e+000 result=40 07:45:03 Config A/D Result=40 07:45:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:03 Get A/D filter: -9.255963e+061 result=40 07:45:03 Get A/D value=-858993460 result=40 07:45:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:03 Parameters OK 07:45:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:03 Set A/D data flow result=40 07:45:03 Set A/D channel type result=40 07:45:03 Set A/D encoding result=40 07:45:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:03 Set channel filter=0.000000e+000 result=40 07:45:03 Config A/D Result=40 07:45:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:03 Get A/D filter: -9.255963e+061 result=40 07:45:03 Get A/D value=-858993460 result=40 07:45:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:03 Aux= 07:45:03 Message to Camera, serial 98892 queued 07:45:40 Received message from Master: op=PointingHead serial=98905 07:45:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:45:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:45:40 Point started: ret=0 07:45:40 point_skyscan result=0 07:45:41 Check angles 07:45:41 SkyScan query 07:45:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:45:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:45:42 Message to Master queued w/err=0: serial=98905 error=0 07:45:47 Received message from Master: op=Filter serial=98906 07:45:47 Color wheel filter change from 0 to 0 07:45:47 FLIGetFilterPos err=0 currentPosition=0 07:45:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:47 Filter is already there-color wheel unchanged 07:45:47 Received message from Master: op=Shutter serial=98907 07:45:47 Shutter LASER close 07:45:47 Received message from Camera: op=State serial=98909 07:45:47 GetSingleValue result=40 Value=cccccccc 07:45:47 SkyScan query 07:45:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:45:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:47 Parameters OK 07:45:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:47 Set A/D data flow result=40 07:45:47 Set A/D channel type result=40 07:45:47 Set A/D encoding result=40 07:45:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:47 Set channel filter=0.000000e+000 result=40 07:45:47 Config A/D Result=40 07:45:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:47 Get A/D filter: -9.255963e+061 result=40 07:45:47 Get A/D value=-858993460 result=40 07:45:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:47 Parameters OK 07:45:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:47 Set A/D data flow result=40 07:45:47 Set A/D channel type result=40 07:45:47 Set A/D encoding result=40 07:45:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:47 Set channel filter=0.000000e+000 result=40 07:45:47 Config A/D Result=40 07:45:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:47 Get A/D filter: -9.255963e+061 result=40 07:45:47 Get A/D value=-858993460 result=40 07:45:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:47 Aux= 07:45:47 Message to Camera, serial 98909 queued 07:46:24 Received message from Master: op=PointingHead serial=98922 07:46:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:46:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:46:24 Point started: ret=0 07:46:24 point_skyscan result=0 07:46:25 Check angles 07:46:25 SkyScan query 07:46:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-23.1<-13540 Statuses=0008 0009 07:46:26 Msec=0 True Az=113.01 Ze=-23.1 Az status=0008 Ze status=0009 07:46:26 Check angles 07:46:26 SkyScan query 07:46:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.115<-14941 Statuses=0008 0009 07:46:27 Msec=750 True Az=112.995 Ze=-44.115 Az status=0008 Ze status=0009 07:46:27 Check angles 07:46:27 SkyScan query 07:46:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.04<-16336 Statuses=0008 0009 07:46:27 Msec=1500 True Az=112.995 Ze=-65.04 Az status=0008 Ze status=0009 07:46:27 Check angles 07:46:27 SkyScan query 07:46:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.01<-17734 Statuses=0008 0009 07:46:28 Msec=2250 True Az=112.995 Ze=-86.01 Az status=0008 Ze status=0009 07:46:28 Check angles 07:46:28 SkyScan query 07:46:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.935<-19129 Statuses=0008 0009 07:46:29 Msec=3000 True Az=112.995 Ze=-106.935 Az status=0008 Ze status=0009 07:46:29 Check angles 07:46:29 SkyScan query 07:46:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.89<-20526 Statuses=0008 0009 07:46:30 Msec=3750 True Az=112.995 Ze=-127.89 Az status=0008 Ze status=0009 07:46:30 Check angles 07:46:30 SkyScan query 07:46:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.815<-21921 Statuses=0008 0009 07:46:30 Msec=4500 True Az=112.995 Ze=-148.815 Az status=0008 Ze status=0009 07:46:30 Check angles 07:46:30 SkyScan query 07:46:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.785<-23319 Statuses=0008 0009 07:46:31 Msec=5250 True Az=112.995 Ze=-169.785 Az status=0008 Ze status=0009 07:46:31 Check angles 07:46:31 SkyScan query 07:46:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:46:32 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:46:32 Message to Master queued w/err=0: serial=98922 error=0 07:46:37 Received message from Master: op=Filter serial=98923 07:46:37 Color wheel filter change from 0 to 0 07:46:37 FLIGetFilterPos err=0 currentPosition=0 07:46:37 FLIGetStepsRemaining err=0 RemainingSteps=0 07:46:37 Filter is already there-color wheel unchanged 07:46:37 Received message from Master: op=Shutter serial=98924 07:46:37 Shutter LASER open 07:46:37 Received message from Camera: op=State serial=98926 07:46:37 GetSingleValue result=40 Value=cccccccc 07:46:37 SkyScan query 07:46:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:46:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:38 Parameters OK 07:46:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:38 Set A/D data flow result=40 07:46:38 Set A/D channel type result=40 07:46:38 Set A/D encoding result=40 07:46:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:38 Set channel filter=0.000000e+000 result=40 07:46:38 Config A/D Result=40 07:46:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:38 Get A/D filter: -9.255963e+061 result=40 07:46:38 Get A/D value=-858993460 result=40 07:46:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:38 Parameters OK 07:46:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:38 Set A/D data flow result=40 07:46:38 Set A/D channel type result=40 07:46:38 Set A/D encoding result=40 07:46:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:38 Set channel filter=0.000000e+000 result=40 07:46:38 Config A/D Result=40 07:46:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:38 Get A/D filter: -9.255963e+061 result=40 07:46:38 Get A/D value=-858993460 result=40 07:46:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:46:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:46:38 Aux= 07:46:38 Message to Camera, serial 98926 queued 07:46:46 Received message from Master: op=Shutter serial=98936 07:46:46 Shutter LASER close 07:46:47 Received message from Master: op=PointingHead serial=98940 07:46:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:46:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:46:47 Point started: ret=0 07:46:47 point_skyscan result=0 07:46:48 Check angles 07:46:48 SkyScan query 07:46:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.565<-21571 Statuses=0008 0009 07:46:48 Msec=0 True Az=112.995 Ze=-143.565 Az status=0008 Ze status=0009 07:46:49 Check angles 07:46:49 SkyScan query 07:46:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.625<-20175 Statuses=0008 0009 07:46:49 Msec=750 True Az=112.995 Ze=-122.625 Az status=0008 Ze status=0009 07:46:49 Check angles 07:46:49 SkyScan query 07:46:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.625<-18775 Statuses=0008 0009 07:46:50 Msec=1500 True Az=112.995 Ze=-101.625 Az status=0008 Ze status=0009 07:46:50 Check angles 07:46:50 SkyScan query 07:46:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.655<-17377 Statuses=0008 0009 07:46:51 Msec=2250 True Az=112.995 Ze=-80.655 Az status=0008 Ze status=0009 07:46:51 Check angles 07:46:51 SkyScan query 07:46:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.715<-15981 Statuses=0008 0009 07:46:51 Msec=3000 True Az=112.995 Ze=-59.715 Az status=0008 Ze status=0009 07:46:52 Check angles 07:46:52 SkyScan query 07:46:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.775<-14585 Statuses=0008 0009 07:46:52 Msec=3750 True Az=112.995 Ze=-38.775 Az status=0008 Ze status=0009 07:46:52 Check angles 07:46:52 SkyScan query 07:46:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.79<-13186 Statuses=0008 0009 07:46:53 Msec=4500 True Az=112.995 Ze=-17.79 Az status=0008 Ze status=0009 07:46:53 Check angles 07:46:53 SkyScan query 07:46:54 SkyScan query done: ret=0 az=112.995<-7533 ze=3.15<-11790 Statuses=0008 0009 07:46:54 Msec=5250 True Az=112.995 Ze=3.15 Az status=0008 Ze status=0009 07:46:54 Check angles 07:46:54 SkyScan query 07:46:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:46:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:46:54 Message to Master queued w/err=0: serial=98940 error=0 07:46:59 Received message from Master: op=Filter serial=98941 07:46:59 Color wheel filter change from 0 to 0 07:46:59 FLIGetFilterPos err=0 currentPosition=0 07:46:59 FLIGetStepsRemaining err=0 RemainingSteps=0 07:46:59 Filter is already there-color wheel unchanged 07:47:00 Received message from Master: op=Shutter serial=98942 07:47:00 Shutter LASER close 07:47:00 Received message from Camera: op=State serial=98944 07:47:00 GetSingleValue result=40 Value=cccccccc 07:47:00 SkyScan query 07:47:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:47:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:00 Parameters OK 07:47:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:00 Set A/D data flow result=40 07:47:00 Set A/D channel type result=40 07:47:00 Set A/D encoding result=40 07:47:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:00 Set channel filter=0.000000e+000 result=40 07:47:00 Config A/D Result=40 07:47:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:00 Get A/D filter: -9.255963e+061 result=40 07:47:00 Get A/D value=-858993460 result=40 07:47:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:00 Parameters OK 07:47:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:00 Set A/D data flow result=40 07:47:00 Set A/D channel type result=40 07:47:00 Set A/D encoding result=40 07:47:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:00 Set channel filter=0.000000e+000 result=40 07:47:00 Config A/D Result=40 07:47:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:00 Get A/D filter: -9.255963e+061 result=40 07:47:00 Get A/D value=-858993460 result=40 07:47:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:00 Aux= 07:47:00 Message to Camera, serial 98944 queued 07:47:37 Received message from Master: op=PointingHead serial=98957 07:47:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:47:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:47:38 Point started: ret=0 07:47:38 point_skyscan result=0 07:47:38 Check angles 07:47:38 SkyScan query 07:47:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:47:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:47:39 Message to Master queued w/err=0: serial=98957 error=0 07:47:44 Received message from Master: op=Filter serial=98958 07:47:44 Color wheel filter change from 0 to 0 07:47:44 FLIGetFilterPos err=0 currentPosition=0 07:47:44 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:44 Filter is already there-color wheel unchanged 07:47:44 Received message from Master: op=Shutter serial=98959 07:47:44 Shutter LASER close 07:47:44 Received message from Camera: op=State serial=98961 07:47:44 GetSingleValue result=40 Value=cccccccc 07:47:44 SkyScan query 07:47:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:47:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:45 Parameters OK 07:47:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:45 Set A/D data flow result=40 07:47:45 Set A/D channel type result=40 07:47:45 Set A/D encoding result=40 07:47:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:45 Set channel filter=0.000000e+000 result=40 07:47:45 Config A/D Result=40 07:47:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:45 Get A/D filter: -9.255963e+061 result=40 07:47:45 Get A/D value=-858993460 result=40 07:47:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:45 Parameters OK 07:47:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:45 Set A/D data flow result=40 07:47:45 Set A/D channel type result=40 07:47:45 Set A/D encoding result=40 07:47:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:45 Set channel filter=0.000000e+000 result=40 07:47:45 Config A/D Result=40 07:47:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:45 Get A/D filter: -9.255963e+061 result=40 07:47:45 Get A/D value=-858993460 result=40 07:47:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:45 Aux= 07:47:45 Message to Camera, serial 98961 queued 07:48:22 Received message from Master: op=PointingHead serial=98974 07:48:22 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:48:22 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:48:22 Point started: ret=0 07:48:22 point_skyscan result=0 07:48:23 Check angles 07:48:23 SkyScan query 07:48:23 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.51<-12434 Statuses=0009 0008 07:48:23 Msec=0 True Az=135.915 Ze=-6.51 Az status=0009 Ze status=0008 07:48:23 Check angles 07:48:23 SkyScan query 07:48:24 SkyScan query done: ret=0 az=153.33<-10222 ze=-6.51<-12434 Statuses=0009 0008 07:48:24 Msec=750 True Az=153.33 Ze=-6.51 Az status=0009 Ze status=0008 07:48:24 Check angles 07:48:24 SkyScan query 07:48:25 SkyScan query done: ret=0 az=170.805<-11387 ze=-6.495<-12433 Statuses=0009 0008 07:48:25 Msec=1500 True Az=170.805 Ze=-6.495 Az status=0009 Ze status=0008 07:48:25 Check angles 07:48:25 SkyScan query 07:48:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:48:25 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:48:25 Message to Master queued w/err=0: serial=98974 error=0 07:48:30 Received message from Master: op=Filter serial=98975 07:48:30 Color wheel filter change from 0 to 0 07:48:30 FLIGetFilterPos err=0 currentPosition=0 07:48:30 FLIGetStepsRemaining err=0 RemainingSteps=0 07:48:30 Filter is already there-color wheel unchanged 07:48:31 Received message from Master: op=Shutter serial=98976 07:48:31 Shutter LASER close 07:48:31 Received message from Camera: op=State serial=98978 07:48:31 GetSingleValue result=40 Value=cccccccc 07:48:31 SkyScan query 07:48:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:48:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:31 Parameters OK 07:48:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:31 Set A/D data flow result=40 07:48:31 Set A/D channel type result=40 07:48:31 Set A/D encoding result=40 07:48:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:31 Set channel filter=0.000000e+000 result=40 07:48:31 Config A/D Result=40 07:48:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:31 Get A/D filter: -9.255963e+061 result=40 07:48:31 Get A/D value=-858993460 result=40 07:48:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:31 Parameters OK 07:48:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:31 Set A/D data flow result=40 07:48:31 Set A/D channel type result=40 07:48:31 Set A/D encoding result=40 07:48:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:31 Set channel filter=0.000000e+000 result=40 07:48:31 Config A/D Result=40 07:48:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:31 Get A/D filter: -9.255963e+061 result=40 07:48:31 Get A/D value=-858993460 result=40 07:48:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:48:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:48:31 Aux= 07:48:31 Message to Camera, serial 98978 queued 07:49:07 Received message from Master: op=PointingHead serial=98990 07:49:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:49:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:49:08 Point started: ret=0 07:49:08 point_skyscan result=0 07:49:08 Check angles 07:49:08 SkyScan query 07:49:09 SkyScan query done: ret=0 az=153.015<-10201 ze=6.51<-11566 Statuses=0009 0008 07:49:09 Msec=0 True Az=153.015 Ze=6.51 Az status=0009 Ze status=0008 07:49:09 Check angles 07:49:09 SkyScan query 07:49:10 SkyScan query done: ret=0 az=135.105<-9007 ze=6.495<-11567 Statuses=0009 0008 07:49:10 Msec=750 True Az=135.105 Ze=6.495 Az status=0009 Ze status=0008 07:49:10 Check angles 07:49:10 SkyScan query 07:49:10 SkyScan query done: ret=0 az=117.66<-7844 ze=6.495<-11567 Statuses=0009 0008 07:49:10 Msec=1500 True Az=117.66 Ze=6.495 Az status=0009 Ze status=0008 07:49:11 Check angles 07:49:11 SkyScan query 07:49:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:49:11 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:49:11 Message to Master queued w/err=0: serial=98990 error=0 07:49:16 Received message from Master: op=Filter serial=98991 07:49:16 Color wheel filter change from 0 to 0 07:49:16 FLIGetFilterPos err=0 currentPosition=0 07:49:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:49:16 Filter is already there-color wheel unchanged 07:49:16 Received message from Master: op=Shutter serial=98992 07:49:16 Shutter LASER close 07:49:16 Received message from Camera: op=State serial=98994 07:49:16 GetSingleValue result=40 Value=cccccccc 07:49:16 SkyScan query 07:49:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:49:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:17 Parameters OK 07:49:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:17 Set A/D data flow result=40 07:49:17 Set A/D channel type result=40 07:49:17 Set A/D encoding result=40 07:49:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:17 Set channel filter=0.000000e+000 result=40 07:49:17 Config A/D Result=40 07:49:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:17 Get A/D filter: -9.255963e+061 result=40 07:49:17 Get A/D value=-858993460 result=40 07:49:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:17 Parameters OK 07:49:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:17 Set A/D data flow result=40 07:49:17 Set A/D channel type result=40 07:49:17 Set A/D encoding result=40 07:49:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:17 Set channel filter=0.000000e+000 result=40 07:49:17 Config A/D Result=40 07:49:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:17 Get A/D filter: -9.255963e+061 result=40 07:49:17 Get A/D value=-858993460 result=40 07:49:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:49:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:49:17 Aux= 07:49:17 Message to Camera, serial 98994 queued 07:49:54 Received message from Master: op=PointingHead serial=99007 07:49:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:49:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:49:54 Point started: ret=0 07:49:54 point_skyscan result=0 07:49:55 Check angles 07:49:55 SkyScan query 07:49:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.625<-13575 Statuses=0008 0009 07:49:55 Msec=0 True Az=112.995 Ze=-23.625 Az status=0008 Ze status=0009 07:49:56 Check angles 07:49:56 SkyScan query 07:49:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.97<-14998 Statuses=0008 0009 07:49:56 Msec=750 True Az=112.995 Ze=-44.97 Az status=0008 Ze status=0009 07:49:56 Check angles 07:49:56 SkyScan query 07:49:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.955<-16397 Statuses=0008 0009 07:49:57 Msec=1500 True Az=112.995 Ze=-65.955 Az status=0008 Ze status=0009 07:49:57 Check angles 07:49:57 SkyScan query 07:49:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.88<-17792 Statuses=0008 0009 07:49:58 Msec=2250 True Az=112.995 Ze=-86.88 Az status=0008 Ze status=0009 07:49:58 Check angles 07:49:58 SkyScan query 07:49:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.315<-19221 Statuses=0008 0009 07:49:58 Msec=3000 True Az=112.995 Ze=-108.315 Az status=0008 Ze status=0009 07:49:59 Check angles 07:49:59 SkyScan query 07:49:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.285<-20619 Statuses=0008 0009 07:49:59 Msec=3750 True Az=112.995 Ze=-129.285 Az status=0008 Ze status=0009 07:49:59 Check angles 07:49:59 SkyScan query 07:50:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.24<-22016 Statuses=0008 0009 07:50:00 Msec=4500 True Az=112.995 Ze=-150.24 Az status=0008 Ze status=0009 07:50:00 Check angles 07:50:00 SkyScan query 07:50:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.03<-23402 Statuses=0008 0009 07:50:01 Msec=5250 True Az=112.995 Ze=-171.03 Az status=0008 Ze status=0009 07:50:01 Check angles 07:50:01 SkyScan query 07:50:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:50:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:50:01 Message to Master queued w/err=0: serial=99007 error=0 07:50:06 Received message from Master: op=Filter serial=99008 07:50:06 Color wheel filter change from 0 to 0 07:50:06 FLIGetFilterPos err=0 currentPosition=0 07:50:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:50:06 Filter is already there-color wheel unchanged 07:50:07 Received message from Master: op=Shutter serial=99009 07:50:07 Shutter LASER open 07:50:07 Received message from Camera: op=State serial=99011 07:50:07 GetSingleValue result=40 Value=cccccccc 07:50:07 SkyScan query 07:50:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:50:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:07 Parameters OK 07:50:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:07 Set A/D data flow result=40 07:50:07 Set A/D channel type result=40 07:50:07 Set A/D encoding result=40 07:50:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:07 Set channel filter=0.000000e+000 result=40 07:50:07 Config A/D Result=40 07:50:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:07 Get A/D filter: -9.255963e+061 result=40 07:50:07 Get A/D value=-858993460 result=40 07:50:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:07 Parameters OK 07:50:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:07 Set A/D data flow result=40 07:50:07 Set A/D channel type result=40 07:50:07 Set A/D encoding result=40 07:50:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:07 Set channel filter=0.000000e+000 result=40 07:50:07 Config A/D Result=40 07:50:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:07 Get A/D filter: -9.255963e+061 result=40 07:50:07 Get A/D value=-858993460 result=40 07:50:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:50:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:50:07 Aux= 07:50:07 Message to Camera, serial 99011 queued 07:50:16 Received message from Master: op=Shutter serial=99021 07:50:16 Shutter LASER close 07:50:16 Received message from Master: op=PointingHead serial=99025 07:50:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:50:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:50:17 Point started: ret=0 07:50:17 point_skyscan result=0 07:50:17 Check angles 07:50:17 SkyScan query 07:50:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.115<-21541 Statuses=0008 0009 07:50:18 Msec=0 True Az=112.995 Ze=-143.115 Az status=0008 Ze status=0009 07:50:18 Check angles 07:50:18 SkyScan query 07:50:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 07:50:19 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 07:50:19 Check angles 07:50:19 SkyScan query 07:50:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 07:50:19 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 07:50:20 Check angles 07:50:20 SkyScan query 07:50:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.25<-17350 Statuses=0008 0009 07:50:20 Msec=2250 True Az=112.995 Ze=-80.25 Az status=0008 Ze status=0009 07:50:20 Check angles 07:50:20 SkyScan query 07:50:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.31<-15954 Statuses=0008 0009 07:50:21 Msec=3000 True Az=112.995 Ze=-59.31 Az status=0008 Ze status=0009 07:50:21 Check angles 07:50:21 SkyScan query 07:50:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.295<-14553 Statuses=0008 0009 07:50:22 Msec=3750 True Az=112.995 Ze=-38.295 Az status=0008 Ze status=0009 07:50:22 Check angles 07:50:22 SkyScan query 07:50:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.355<-13157 Statuses=0008 0009 07:50:22 Msec=4500 True Az=112.995 Ze=-17.355 Az status=0008 Ze status=0009 07:50:23 Check angles 07:50:23 SkyScan query 07:50:23 SkyScan query done: ret=0 az=112.995<-7533 ze=3.6<-11760 Statuses=0008 0009 07:50:23 Msec=5250 True Az=112.995 Ze=3.6 Az status=0008 Ze status=0009 07:50:23 Check angles 07:50:23 SkyScan query 07:50:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:50:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:50:24 Message to Master queued w/err=0: serial=99025 error=0 07:50:29 Received message from Master: op=Filter serial=99026 07:50:29 Color wheel filter change from 0 to 0 07:50:29 FLIGetFilterPos err=0 currentPosition=0 07:50:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:50:29 Filter is already there-color wheel unchanged 07:50:29 Received message from Master: op=Shutter serial=99027 07:50:29 Shutter LASER close 07:50:29 Received message from Camera: op=State serial=99029 07:50:29 GetSingleValue result=40 Value=cccccccc 07:50:29 SkyScan query 07:50:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:50:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:30 Parameters OK 07:50:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:30 Set A/D data flow result=40 07:50:30 Set A/D channel type result=40 07:50:30 Set A/D encoding result=40 07:50:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:30 Set channel filter=0.000000e+000 result=40 07:50:30 Config A/D Result=40 07:50:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:30 Get A/D filter: -9.255963e+061 result=40 07:50:30 Get A/D value=-858993460 result=40 07:50:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:30 Parameters OK 07:50:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:30 Set A/D data flow result=40 07:50:30 Set A/D channel type result=40 07:50:30 Set A/D encoding result=40 07:50:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:30 Set channel filter=0.000000e+000 result=40 07:50:30 Config A/D Result=40 07:50:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:30 Get A/D filter: -9.255963e+061 result=40 07:50:30 Get A/D value=-858993460 result=40 07:50:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:50:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:50:30 Aux= 07:50:30 Message to Camera, serial 99029 queued 07:51:07 Received message from Master: op=PointingHead serial=99042 07:51:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:51:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:51:07 Point started: ret=0 07:51:07 point_skyscan result=0 07:51:08 Check angles 07:51:08 SkyScan query 07:51:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:51:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:51:08 Message to Master queued w/err=0: serial=99042 error=0 07:51:13 Received message from Master: op=Filter serial=99043 07:51:13 Color wheel filter change from 0 to 0 07:51:13 FLIGetFilterPos err=0 currentPosition=0 07:51:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:13 Filter is already there-color wheel unchanged 07:51:14 Received message from Master: op=Shutter serial=99044 07:51:14 Shutter LASER close 07:51:14 Received message from Camera: op=State serial=99046 07:51:14 GetSingleValue result=40 Value=cccccccc 07:51:14 SkyScan query 07:51:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:51:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:14 Parameters OK 07:51:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:14 Set A/D data flow result=40 07:51:14 Set A/D channel type result=40 07:51:14 Set A/D encoding result=40 07:51:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:14 Set channel filter=0.000000e+000 result=40 07:51:14 Config A/D Result=40 07:51:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:14 Get A/D filter: -9.255963e+061 result=40 07:51:14 Get A/D value=-858993460 result=40 07:51:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:14 Parameters OK 07:51:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:14 Set A/D data flow result=40 07:51:14 Set A/D channel type result=40 07:51:14 Set A/D encoding result=40 07:51:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:14 Set channel filter=0.000000e+000 result=40 07:51:14 Config A/D Result=40 07:51:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:14 Get A/D filter: -9.255963e+061 result=40 07:51:14 Get A/D value=-858993460 result=40 07:51:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:14 Aux= 07:51:14 Message to Camera, serial 99046 queued 07:51:51 Received message from Master: op=PointingHead serial=99059 07:51:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:51:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:51:51 Point started: ret=0 07:51:51 point_skyscan result=0 07:51:52 Check angles 07:51:52 SkyScan query 07:51:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:51:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:51:53 Message to Master queued w/err=0: serial=99059 error=0 07:51:58 Received message from Master: op=Filter serial=99060 07:51:58 Color wheel filter change from 0 to 0 07:51:58 FLIGetFilterPos err=0 currentPosition=0 07:51:58 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:58 Filter is already there-color wheel unchanged 07:51:58 Received message from Master: op=Shutter serial=99061 07:51:58 Shutter LASER close 07:51:58 Received message from Camera: op=State serial=99063 07:51:58 GetSingleValue result=40 Value=cccccccc 07:51:58 SkyScan query 07:51:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:51:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:58 Parameters OK 07:51:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:58 Set A/D data flow result=40 07:51:58 Set A/D channel type result=40 07:51:58 Set A/D encoding result=40 07:51:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:58 Set channel filter=0.000000e+000 result=40 07:51:58 Config A/D Result=40 07:51:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:58 Get A/D filter: -9.255963e+061 result=40 07:51:58 Get A/D value=-858993460 result=40 07:51:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:58 Parameters OK 07:51:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:58 Set A/D data flow result=40 07:51:58 Set A/D channel type result=40 07:51:58 Set A/D encoding result=40 07:51:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:58 Set channel filter=0.000000e+000 result=40 07:51:58 Config A/D Result=40 07:51:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:58 Get A/D filter: -9.255963e+061 result=40 07:51:58 Get A/D value=-858993460 result=40 07:51:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:58 Aux= 07:51:58 Message to Camera, serial 99063 queued 07:52:35 Received message from Master: op=PointingHead serial=99076 07:52:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:52:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:52:36 Point started: ret=0 07:52:36 point_skyscan result=0 07:52:36 Check angles 07:52:36 SkyScan query 07:52:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:52:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:52:37 Message to Master queued w/err=0: serial=99076 error=0 07:52:42 Received message from Master: op=Filter serial=99077 07:52:42 Color wheel filter change from 0 to 0 07:52:42 FLIGetFilterPos err=0 currentPosition=0 07:52:42 FLIGetStepsRemaining err=0 RemainingSteps=0 07:52:42 Filter is already there-color wheel unchanged 07:52:42 Received message from Master: op=Shutter serial=99078 07:52:42 Shutter LASER close 07:52:42 Received message from Camera: op=State serial=99080 07:52:42 GetSingleValue result=40 Value=cccccccc 07:52:42 SkyScan query 07:52:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:52:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:43 Parameters OK 07:52:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:43 Set A/D data flow result=40 07:52:43 Set A/D channel type result=40 07:52:43 Set A/D encoding result=40 07:52:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:43 Set channel filter=0.000000e+000 result=40 07:52:43 Config A/D Result=40 07:52:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:43 Get A/D filter: -9.255963e+061 result=40 07:52:43 Get A/D value=-858993460 result=40 07:52:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:43 Parameters OK 07:52:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:43 Set A/D data flow result=40 07:52:43 Set A/D channel type result=40 07:52:43 Set A/D encoding result=40 07:52:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:43 Set channel filter=0.000000e+000 result=40 07:52:43 Config A/D Result=40 07:52:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:43 Get A/D filter: -9.255963e+061 result=40 07:52:43 Get A/D value=-858993460 result=40 07:52:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:52:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:52:43 Aux= 07:52:43 Message to Camera, serial 99080 queued 07:53:20 Received message from Master: op=PointingHead serial=99093 07:53:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:53:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:53:20 Point started: ret=0 07:53:20 point_skyscan result=0 07:53:21 Check angles 07:53:21 SkyScan query 07:53:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 07:53:21 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 07:53:21 Check angles 07:53:21 SkyScan query 07:53:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 07:53:22 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 07:53:22 Check angles 07:53:22 SkyScan query 07:53:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.01<-16334 Statuses=0008 0009 07:53:23 Msec=1500 True Az=112.995 Ze=-65.01 Az status=0008 Ze status=0009 07:53:23 Check angles 07:53:23 SkyScan query 07:53:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.98<-17732 Statuses=0008 0009 07:53:24 Msec=2250 True Az=112.995 Ze=-85.98 Az status=0008 Ze status=0009 07:53:24 Check angles 07:53:24 SkyScan query 07:53:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.325<-19155 Statuses=0008 0009 07:53:24 Msec=3000 True Az=112.995 Ze=-107.325 Az status=0008 Ze status=0009 07:53:24 Check angles 07:53:24 SkyScan query 07:53:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.28<-20552 Statuses=0008 0009 07:53:25 Msec=3750 True Az=112.995 Ze=-128.28 Az status=0008 Ze status=0009 07:53:25 Check angles 07:53:25 SkyScan query 07:53:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.25<-21950 Statuses=0008 0009 07:53:26 Msec=4500 True Az=112.995 Ze=-149.25 Az status=0008 Ze status=0009 07:53:26 Check angles 07:53:26 SkyScan query 07:53:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.595<-23373 Statuses=0008 0009 07:53:27 Msec=5250 True Az=112.995 Ze=-170.595 Az status=0008 Ze status=0009 07:53:27 Check angles 07:53:27 SkyScan query 07:53:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:53:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:53:27 Message to Master queued w/err=0: serial=99093 error=0 07:53:32 Received message from Master: op=Filter serial=99094 07:53:32 Color wheel filter change from 0 to 0 07:53:32 FLIGetFilterPos err=0 currentPosition=0 07:53:32 FLIGetStepsRemaining err=0 RemainingSteps=0 07:53:32 Filter is already there-color wheel unchanged 07:53:32 Received message from Master: op=Shutter serial=99095 07:53:32 Shutter LASER open 07:53:33 Received message from Camera: op=State serial=99097 07:53:33 GetSingleValue result=40 Value=cccccccc 07:53:33 SkyScan query 07:53:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:53:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:33 Parameters OK 07:53:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:33 Set A/D data flow result=40 07:53:33 Set A/D channel type result=40 07:53:33 Set A/D encoding result=40 07:53:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:33 Set channel filter=0.000000e+000 result=40 07:53:33 Config A/D Result=40 07:53:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:33 Get A/D filter: -9.255963e+061 result=40 07:53:33 Get A/D value=-858993460 result=40 07:53:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:33 Parameters OK 07:53:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:33 Set A/D data flow result=40 07:53:33 Set A/D channel type result=40 07:53:33 Set A/D encoding result=40 07:53:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:33 Set channel filter=0.000000e+000 result=40 07:53:33 Config A/D Result=40 07:53:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:33 Get A/D filter: -9.255963e+061 result=40 07:53:33 Get A/D value=-858993460 result=40 07:53:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:53:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:53:33 Aux= 07:53:33 Message to Camera, serial 99097 queued 07:53:42 Received message from Master: op=Shutter serial=99107 07:53:42 Shutter LASER close 07:53:42 Received message from Master: op=PointingHead serial=99111 07:53:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:53:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:53:43 Point started: ret=0 07:53:43 point_skyscan result=0 07:53:43 Check angles 07:53:43 SkyScan query 07:53:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 07:53:44 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 07:53:44 Check angles 07:53:44 SkyScan query 07:53:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 07:53:45 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 07:53:45 Check angles 07:53:45 SkyScan query 07:53:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 07:53:45 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 07:53:46 Check angles 07:53:46 SkyScan query 07:53:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 07:53:46 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 07:53:46 Check angles 07:53:46 SkyScan query 07:53:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 07:53:47 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 07:53:47 Check angles 07:53:47 SkyScan query 07:53:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.19<-14546 Statuses=0008 0009 07:53:48 Msec=3750 True Az=112.995 Ze=-38.19 Az status=0008 Ze status=0009 07:53:48 Check angles 07:53:48 SkyScan query 07:53:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.265<-13151 Statuses=0008 0009 07:53:48 Msec=4500 True Az=112.995 Ze=-17.265 Az status=0008 Ze status=0009 07:53:49 Check angles 07:53:49 SkyScan query 07:53:49 SkyScan query done: ret=0 az=112.995<-7533 ze=3.72<-11752 Statuses=0008 0009 07:53:49 Msec=5250 True Az=112.995 Ze=3.72 Az status=0008 Ze status=0009 07:53:49 Check angles 07:53:49 SkyScan query 07:53:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:53:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:53:50 Message to Master queued w/err=0: serial=99111 error=0 07:53:55 Received message from Master: op=Filter serial=99112 07:53:55 Color wheel filter change from 0 to 0 07:53:55 FLIGetFilterPos err=0 currentPosition=0 07:53:55 FLIGetStepsRemaining err=0 RemainingSteps=0 07:53:55 Filter is already there-color wheel unchanged 07:53:55 Received message from Master: op=Shutter serial=99113 07:53:55 Shutter LASER close 07:53:55 Received message from Camera: op=State serial=99115 07:53:55 GetSingleValue result=40 Value=cccccccc 07:53:55 SkyScan query 07:53:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:53:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:56 Parameters OK 07:53:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:56 Set A/D data flow result=40 07:53:56 Set A/D channel type result=40 07:53:56 Set A/D encoding result=40 07:53:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:56 Set channel filter=0.000000e+000 result=40 07:53:56 Config A/D Result=40 07:53:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:56 Get A/D filter: -9.255963e+061 result=40 07:53:56 Get A/D value=-858993460 result=40 07:53:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:56 Parameters OK 07:53:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:56 Set A/D data flow result=40 07:53:56 Set A/D channel type result=40 07:53:56 Set A/D encoding result=40 07:53:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:56 Set channel filter=0.000000e+000 result=40 07:53:56 Config A/D Result=40 07:53:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:56 Get A/D filter: -9.255963e+061 result=40 07:53:56 Get A/D value=-858993460 result=40 07:53:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:53:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:53:56 Aux= 07:53:56 Message to Camera, serial 99115 queued 07:54:33 Received message from Master: op=PointingHead serial=99128 07:54:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:54:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:54:33 Point started: ret=0 07:54:33 point_skyscan result=0 07:54:34 Check angles 07:54:34 SkyScan query 07:54:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:54:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:54:34 Message to Master queued w/err=0: serial=99128 error=0 07:54:39 Received message from Master: op=Filter serial=99129 07:54:39 Color wheel filter change from 0 to 0 [UTC 2019-3-4 07:54:39] 07:54:39 FLIGetFilterPos err=0 currentPosition=0 07:54:39 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:39 Filter is already there-color wheel unchanged 07:54:40 Received message from Master: op=Shutter serial=99130 07:54:40 Shutter LASER close 07:54:40 Received message from Camera: op=State serial=99132 07:54:40 GetSingleValue result=40 Value=cccccccc 07:54:40 SkyScan query 07:54:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:54:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:40 Parameters OK 07:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:40 Set A/D data flow result=40 07:54:40 Set A/D channel type result=40 07:54:40 Set A/D encoding result=40 07:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:40 Set channel filter=0.000000e+000 result=40 07:54:40 Config A/D Result=40 07:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:40 Get A/D filter: -9.255963e+061 result=40 07:54:40 Get A/D value=-858993460 result=40 07:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:40 Parameters OK 07:54:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:40 Set A/D data flow result=40 07:54:40 Set A/D channel type result=40 07:54:40 Set A/D encoding result=40 07:54:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:40 Set channel filter=0.000000e+000 result=40 07:54:40 Config A/D Result=40 07:54:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:40 Get A/D filter: -9.255963e+061 result=40 07:54:40 Get A/D value=-858993460 result=40 07:54:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:40 Aux= 07:54:40 Message to Camera, serial 99132 queued 07:55:17 Received message from Master: op=PointingHead serial=99145 07:55:17 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:55:17 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:55:17 Point started: ret=0 07:55:17 point_skyscan result=0 07:55:18 Check angles 07:55:18 SkyScan query 07:55:19 SkyScan query done: ret=0 az=135.72<-9048 ze=-6.51<-12434 Statuses=0009 0008 07:55:19 Msec=0 True Az=135.72 Ze=-6.51 Az status=0009 Ze status=0008 07:55:19 Check angles 07:55:19 SkyScan query 07:55:20 SkyScan query done: ret=0 az=153.615<-10241 ze=-6.495<-12433 Statuses=0009 0008 07:55:20 Msec=750 True Az=153.615 Ze=-6.495 Az status=0009 Ze status=0008 07:55:20 Check angles 07:55:20 SkyScan query 07:55:20 SkyScan query done: ret=0 az=171.39<-11426 ze=-6.495<-12433 Statuses=0009 0008 07:55:20 Msec=1500 True Az=171.39 Ze=-6.495 Az status=0009 Ze status=0008 07:55:20 Check angles 07:55:20 SkyScan query 07:55:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:55:21 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 07:55:21 Message to Master queued w/err=0: serial=99145 error=0 07:55:26 Received message from Master: op=Filter serial=99146 07:55:26 Color wheel filter change from 0 to 0 07:55:26 FLIGetFilterPos err=0 currentPosition=0 07:55:26 FLIGetStepsRemaining err=0 RemainingSteps=0 07:55:26 Filter is already there-color wheel unchanged 07:55:26 Received message from Master: op=Shutter serial=99147 07:55:26 Shutter LASER close 07:55:26 Received message from Camera: op=State serial=99149 07:55:26 GetSingleValue result=40 Value=cccccccc 07:55:26 SkyScan query 07:55:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:55:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:27 Parameters OK 07:55:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:27 Set A/D data flow result=40 07:55:27 Set A/D channel type result=40 07:55:27 Set A/D encoding result=40 07:55:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:27 Set channel filter=0.000000e+000 result=40 07:55:27 Config A/D Result=40 07:55:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:27 Get A/D filter: -9.255963e+061 result=40 07:55:27 Get A/D value=-858993460 result=40 07:55:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:27 Parameters OK 07:55:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:27 Set A/D data flow result=40 07:55:27 Set A/D channel type result=40 07:55:27 Set A/D encoding result=40 07:55:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:27 Set channel filter=0.000000e+000 result=40 07:55:27 Config A/D Result=40 07:55:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:27 Get A/D filter: -9.255963e+061 result=40 07:55:27 Get A/D value=-858993460 result=40 07:55:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:55:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:55:27 Aux= 07:55:27 Message to Camera, serial 99149 queued 07:56:04 Received message from Master: op=PointingHead serial=99162 07:56:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:56:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:56:04 Point started: ret=0 07:56:04 point_skyscan result=0 07:56:05 Check angles 07:56:05 SkyScan query 07:56:05 SkyScan query done: ret=0 az=153.165<-10211 ze=6.51<-11566 Statuses=0009 0008 07:56:05 Msec=0 True Az=153.165 Ze=6.51 Az status=0009 Ze status=0008 07:56:05 Check angles 07:56:05 SkyScan query 07:56:06 SkyScan query done: ret=0 az=135.705<-9047 ze=6.495<-11567 Statuses=0009 0008 07:56:06 Msec=750 True Az=135.705 Ze=6.495 Az status=0009 Ze status=0008 07:56:06 Check angles 07:56:06 SkyScan query 07:56:07 SkyScan query done: ret=0 az=118.17<-7878 ze=6.495<-11567 Statuses=0009 0008 07:56:07 Msec=1500 True Az=118.17 Ze=6.495 Az status=0009 Ze status=0008 07:56:07 Check angles 07:56:07 SkyScan query 07:56:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:56:08 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:56:08 Message to Master queued w/err=0: serial=99162 error=0 07:56:13 Received message from Master: op=Filter serial=99163 07:56:13 Color wheel filter change from 0 to 0 07:56:13 FLIGetFilterPos err=0 currentPosition=0 07:56:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:56:13 Filter is already there-color wheel unchanged 07:56:13 Received message from Master: op=Shutter serial=99164 07:56:13 Shutter LASER close 07:56:13 Received message from Camera: op=State serial=99166 07:56:13 GetSingleValue result=40 Value=cccccccc 07:56:13 SkyScan query 07:56:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:56:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:13 Parameters OK 07:56:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:13 Set A/D data flow result=40 07:56:13 Set A/D channel type result=40 07:56:13 Set A/D encoding result=40 07:56:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:13 Set channel filter=0.000000e+000 result=40 07:56:13 Config A/D Result=40 07:56:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:13 Get A/D filter: -9.255963e+061 result=40 07:56:13 Get A/D value=-858993460 result=40 07:56:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:13 Parameters OK 07:56:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:13 Set A/D data flow result=40 07:56:13 Set A/D channel type result=40 07:56:13 Set A/D encoding result=40 07:56:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:13 Set channel filter=0.000000e+000 result=40 07:56:13 Config A/D Result=40 07:56:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:13 Get A/D filter: -9.255963e+061 result=40 07:56:13 Get A/D value=-858993460 result=40 07:56:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:56:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:56:13 Aux= 07:56:13 Message to Camera, serial 99166 queued 07:56:50 Received message from Master: op=PointingHead serial=99179 07:56:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:56:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:56:51 Point started: ret=0 07:56:51 point_skyscan result=0 07:56:51 Check angles 07:56:51 SkyScan query 07:56:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.655<-13577 Statuses=0008 0009 07:56:52 Msec=0 True Az=112.995 Ze=-23.655 Az status=0008 Ze status=0009 07:56:52 Check angles 07:56:52 SkyScan query 07:56:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 07:56:53 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 07:56:53 Check angles 07:56:53 SkyScan query 07:56:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.985<-16399 Statuses=0008 0009 07:56:53 Msec=1500 True Az=112.995 Ze=-65.985 Az status=0008 Ze status=0009 07:56:54 Check angles 07:56:54 SkyScan query 07:56:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.925<-17795 Statuses=0008 0009 07:56:54 Msec=2250 True Az=112.995 Ze=-86.925 Az status=0008 Ze status=0009 07:56:54 Check angles 07:56:54 SkyScan query 07:56:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.895<-19193 Statuses=0008 0009 07:56:55 Msec=3000 True Az=112.995 Ze=-107.895 Az status=0008 Ze status=0009 07:56:55 Check angles 07:56:55 SkyScan query 07:56:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.3<-20620 Statuses=0008 0009 07:56:56 Msec=3750 True Az=112.995 Ze=-129.3 Az status=0008 Ze status=0009 07:56:56 Check angles 07:56:56 SkyScan query 07:56:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.255<-22017 Statuses=0008 0009 07:56:56 Msec=4500 True Az=112.995 Ze=-150.255 Az status=0008 Ze status=0009 07:56:57 Check angles 07:56:57 SkyScan query 07:56:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.06<-23404 Statuses=0008 0009 07:56:57 Msec=5250 True Az=112.995 Ze=-171.06 Az status=0008 Ze status=0009 07:56:57 Check angles 07:56:57 SkyScan query 07:56:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:56:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:56:58 Message to Master queued w/err=0: serial=99179 error=0 07:57:03 Received message from Master: op=Filter serial=99180 07:57:03 Color wheel filter change from 0 to 0 07:57:03 FLIGetFilterPos err=0 currentPosition=0 07:57:03 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:03 Filter is already there-color wheel unchanged 07:57:03 Received message from Master: op=Shutter serial=99181 07:57:03 Shutter LASER open 07:57:03 Received message from Camera: op=State serial=99183 07:57:03 GetSingleValue result=40 Value=cccccccc 07:57:03 SkyScan query 07:57:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:57:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:04 Parameters OK 07:57:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:04 Set A/D data flow result=40 07:57:04 Set A/D channel type result=40 07:57:04 Set A/D encoding result=40 07:57:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:04 Set channel filter=0.000000e+000 result=40 07:57:04 Config A/D Result=40 07:57:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:04 Get A/D filter: -9.255963e+061 result=40 07:57:04 Get A/D value=-858993460 result=40 07:57:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:04 Parameters OK 07:57:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:04 Set A/D data flow result=40 07:57:04 Set A/D channel type result=40 07:57:04 Set A/D encoding result=40 07:57:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:04 Set channel filter=0.000000e+000 result=40 07:57:04 Config A/D Result=40 07:57:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:04 Get A/D filter: -9.255963e+061 result=40 07:57:04 Get A/D value=-858993460 result=40 07:57:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:04 Aux= 07:57:04 Message to Camera, serial 99183 queued 07:57:12 Received message from Master: op=Shutter serial=99193 07:57:12 Shutter LASER close 07:57:13 Received message from Master: op=PointingHead serial=99197 07:57:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:57:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:57:13 Point started: ret=0 07:57:13 point_skyscan result=0 07:57:14 Check angles 07:57:14 SkyScan query 07:57:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.695<-21513 Statuses=0008 0009 07:57:14 Msec=0 True Az=112.995 Ze=-142.695 Az status=0008 Ze status=0009 07:57:15 Check angles 07:57:15 SkyScan query 07:57:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.275<-20085 Statuses=0008 0009 07:57:15 Msec=750 True Az=112.995 Ze=-121.275 Az status=0008 Ze status=0009 07:57:15 Check angles 07:57:15 SkyScan query 07:57:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.335<-18689 Statuses=0008 0009 07:57:16 Msec=1500 True Az=112.995 Ze=-100.335 Az status=0008 Ze status=0009 07:57:16 Check angles 07:57:16 SkyScan query 07:57:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.35<-17290 Statuses=0008 0009 07:57:17 Msec=2250 True Az=112.995 Ze=-79.35 Az status=0008 Ze status=0009 07:57:17 Check angles 07:57:17 SkyScan query 07:57:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.41<-15894 Statuses=0008 0009 07:57:17 Msec=3000 True Az=112.995 Ze=-58.41 Az status=0008 Ze status=0009 07:57:18 Check angles 07:57:18 SkyScan query 07:57:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.485<-14499 Statuses=0008 0009 07:57:18 Msec=3750 True Az=112.995 Ze=-37.485 Az status=0008 Ze status=0009 07:57:18 Check angles 07:57:18 SkyScan query 07:57:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.515<-13101 Statuses=0008 0009 07:57:19 Msec=4500 True Az=112.995 Ze=-16.515 Az status=0008 Ze status=0009 07:57:19 Check angles 07:57:19 SkyScan query 07:57:20 SkyScan query done: ret=0 az=112.995<-7533 ze=4.35<-11710 Statuses=0008 0009 07:57:20 Msec=5250 True Az=112.995 Ze=4.35 Az status=0008 Ze status=0009 07:57:20 Check angles 07:57:20 SkyScan query 07:57:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:57:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:57:20 Message to Master queued w/err=0: serial=99197 error=0 07:57:25 Received message from Master: op=Filter serial=99198 07:57:25 Color wheel filter change from 0 to 0 07:57:25 FLIGetFilterPos err=0 currentPosition=0 07:57:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:25 Filter is already there-color wheel unchanged 07:57:26 Received message from Master: op=Shutter serial=99199 07:57:26 Shutter LASER close 07:57:26 Received message from Camera: op=State serial=99201 07:57:26 GetSingleValue result=40 Value=cccccccc 07:57:26 SkyScan query 07:57:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:57:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:26 Parameters OK 07:57:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:26 Set A/D data flow result=40 07:57:26 Set A/D channel type result=40 07:57:26 Set A/D encoding result=40 07:57:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:26 Set channel filter=0.000000e+000 result=40 07:57:26 Config A/D Result=40 07:57:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:26 Get A/D filter: -9.255963e+061 result=40 07:57:26 Get A/D value=-858993460 result=40 07:57:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:26 Parameters OK 07:57:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:26 Set A/D data flow result=40 07:57:26 Set A/D channel type result=40 07:57:26 Set A/D encoding result=40 07:57:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:26 Set channel filter=0.000000e+000 result=40 07:57:26 Config A/D Result=40 07:57:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:26 Get A/D filter: -9.255963e+061 result=40 07:57:26 Get A/D value=-858993460 result=40 07:57:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:26 Aux= 07:57:26 Message to Camera, serial 99201 queued 07:58:03 Received message from Master: op=PointingHead serial=99214 07:58:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:58:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:58:04 Point started: ret=0 07:58:04 point_skyscan result=0 07:58:04 Check angles 07:58:04 SkyScan query 07:58:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:58:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:58:05 Message to Master queued w/err=0: serial=99214 error=0 07:58:10 Received message from Master: op=Filter serial=99215 07:58:10 Color wheel filter change from 0 to 0 07:58:10 FLIGetFilterPos err=0 currentPosition=0 07:58:10 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:10 Filter is already there-color wheel unchanged 07:58:10 Received message from Master: op=Shutter serial=99216 07:58:10 Shutter LASER close 07:58:10 Received message from Camera: op=State serial=99218 07:58:10 GetSingleValue result=40 Value=cccccccc 07:58:10 SkyScan query 07:58:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:58:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:11 Parameters OK 07:58:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:11 Set A/D data flow result=40 07:58:11 Set A/D channel type result=40 07:58:11 Set A/D encoding result=40 07:58:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:11 Set channel filter=0.000000e+000 result=40 07:58:11 Config A/D Result=40 07:58:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:11 Get A/D filter: -9.255963e+061 result=40 07:58:11 Get A/D value=-858993460 result=40 07:58:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:11 Parameters OK 07:58:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:11 Set A/D data flow result=40 07:58:11 Set A/D channel type result=40 07:58:11 Set A/D encoding result=40 07:58:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:11 Set channel filter=0.000000e+000 result=40 07:58:11 Config A/D Result=40 07:58:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:11 Get A/D filter: -9.255963e+061 result=40 07:58:11 Get A/D value=-858993460 result=40 07:58:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:11 Aux= 07:58:11 Message to Camera, serial 99218 queued 07:58:47 Received message from Master: op=PointingHead serial=99230 07:58:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:58:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:58:47 Point started: ret=0 07:58:47 point_skyscan result=0 07:58:48 Check angles 07:58:48 SkyScan query 07:58:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:58:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:58:48 Message to Master queued w/err=0: serial=99230 error=0 07:58:53 Received message from Master: op=Filter serial=99231 07:58:53 Color wheel filter change from 0 to 0 07:58:53 FLIGetFilterPos err=0 currentPosition=0 07:58:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:53 Filter is already there-color wheel unchanged 07:58:53 Received message from Master: op=Shutter serial=99232 07:58:53 Shutter LASER close 07:58:53 Received message from Camera: op=State serial=99234 07:58:53 GetSingleValue result=40 Value=cccccccc 07:58:53 SkyScan query 07:58:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:58:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:54 Parameters OK 07:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:54 Set A/D data flow result=40 07:58:54 Set A/D channel type result=40 07:58:54 Set A/D encoding result=40 07:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:54 Set channel filter=0.000000e+000 result=40 07:58:54 Config A/D Result=40 07:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:54 Get A/D filter: -9.255963e+061 result=40 07:58:54 Get A/D value=-858993460 result=40 07:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:54 Parameters OK 07:58:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:54 Set A/D data flow result=40 07:58:54 Set A/D channel type result=40 07:58:54 Set A/D encoding result=40 07:58:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:54 Set channel filter=0.000000e+000 result=40 07:58:54 Config A/D Result=40 07:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:54 Get A/D filter: -9.255963e+061 result=40 07:58:54 Get A/D value=-858993460 result=40 07:58:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:54 Aux= 07:58:54 Message to Camera, serial 99234 queued 07:59:31 Received message from Master: op=PointingHead serial=99247 07:59:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:59:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:59:31 Point started: ret=0 07:59:31 point_skyscan result=0 07:59:32 Check angles 07:59:32 SkyScan query 07:59:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:59:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:59:33 Message to Master queued w/err=0: serial=99247 error=0 07:59:38 Received message from Master: op=Filter serial=99248 07:59:38 Color wheel filter change from 0 to 0 07:59:38 FLIGetFilterPos err=0 currentPosition=0 07:59:38 FLIGetStepsRemaining err=0 RemainingSteps=0 07:59:38 Filter is already there-color wheel unchanged 07:59:38 Received message from Master: op=Shutter serial=99249 07:59:38 Shutter LASER close 07:59:38 Received message from Camera: op=State serial=99251 07:59:38 GetSingleValue result=40 Value=cccccccc 07:59:38 SkyScan query 07:59:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:59:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:38 Parameters OK 07:59:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:38 Set A/D data flow result=40 07:59:38 Set A/D channel type result=40 07:59:38 Set A/D encoding result=40 07:59:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:38 Set channel filter=0.000000e+000 result=40 07:59:38 Config A/D Result=40 07:59:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:38 Get A/D filter: -9.255963e+061 result=40 07:59:38 Get A/D value=-858993460 result=40 07:59:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:38 Parameters OK 07:59:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:38 Set A/D data flow result=40 07:59:38 Set A/D channel type result=40 07:59:38 Set A/D encoding result=40 07:59:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:38 Set channel filter=0.000000e+000 result=40 07:59:38 Config A/D Result=40 07:59:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:38 Get A/D filter: -9.255963e+061 result=40 07:59:38 Get A/D value=-858993460 result=40 07:59:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:59:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:59:38 Aux= 07:59:38 Message to Camera, serial 99251 queued 08:00:15 Received message from Master: op=PointingHead serial=99264 08:00:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:00:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:00:15 Point started: ret=0 08:00:15 point_skyscan result=0 08:00:16 Check angles 08:00:16 SkyScan query 08:00:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 08:00:17 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 08:00:17 Check angles 08:00:17 SkyScan query 08:00:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.295<-14953 Statuses=0008 0009 08:00:18 Msec=750 True Az=112.995 Ze=-44.295 Az status=0008 Ze status=0009 08:00:18 Check angles 08:00:18 SkyScan query 08:00:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 08:00:18 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 08:00:18 Check angles 08:00:18 SkyScan query 08:00:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.16<-17744 Statuses=0008 0009 08:00:19 Msec=2250 True Az=112.995 Ze=-86.16 Az status=0008 Ze status=0009 08:00:19 Check angles 08:00:19 SkyScan query 08:00:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.115<-19141 Statuses=0008 0009 08:00:20 Msec=3000 True Az=112.995 Ze=-107.115 Az status=0008 Ze status=0009 08:00:20 Check angles 08:00:20 SkyScan query 08:00:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.055<-20537 Statuses=0008 0009 08:00:21 Msec=3750 True Az=112.995 Ze=-128.055 Az status=0008 Ze status=0009 08:00:21 Check angles 08:00:21 SkyScan query 08:00:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.01<-21934 Statuses=0008 0009 08:00:21 Msec=4500 True Az=112.995 Ze=-149.01 Az status=0008 Ze status=0009 08:00:21 Check angles 08:00:21 SkyScan query 08:00:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.965<-23331 Statuses=0008 0009 08:00:22 Msec=5250 True Az=112.995 Ze=-169.965 Az status=0008 Ze status=0009 08:00:22 Check angles 08:00:22 SkyScan query 08:00:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:00:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:00:23 Message to Master queued w/err=0: serial=99264 error=0 08:00:28 Received message from Master: op=Filter serial=99265 08:00:28 Color wheel filter change from 0 to 0 08:00:28 FLIGetFilterPos err=0 currentPosition=0 08:00:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:00:28 Filter is already there-color wheel unchanged 08:00:28 Received message from Master: op=Shutter serial=99266 08:00:28 Shutter LASER open 08:00:28 Received message from Camera: op=State serial=99268 08:00:28 GetSingleValue result=40 Value=cccccccc 08:00:28 SkyScan query 08:00:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:00:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:29 Parameters OK 08:00:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:29 Set A/D data flow result=40 08:00:29 Set A/D channel type result=40 08:00:29 Set A/D encoding result=40 08:00:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:29 Set channel filter=0.000000e+000 result=40 08:00:29 Config A/D Result=40 08:00:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:29 Get A/D filter: -9.255963e+061 result=40 08:00:29 Get A/D value=-858993460 result=40 08:00:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:29 Parameters OK 08:00:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:29 Set A/D data flow result=40 08:00:29 Set A/D channel type result=40 08:00:29 Set A/D encoding result=40 08:00:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:29 Set channel filter=0.000000e+000 result=40 08:00:29 Config A/D Result=40 08:00:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:29 Get A/D filter: -9.255963e+061 result=40 08:00:29 Get A/D value=-858993460 result=40 08:00:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:00:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:00:29 Aux= 08:00:29 Message to Camera, serial 99268 queued 08:00:37 Received message from Master: op=Shutter serial=99278 08:00:37 Shutter LASER close 08:00:38 Received message from Master: op=PointingHead serial=99282 08:00:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:00:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:00:38 Point started: ret=0 08:00:38 point_skyscan result=0 08:00:39 Check angles 08:00:39 SkyScan query 08:00:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.55<-21570 Statuses=0008 0009 08:00:39 Msec=0 True Az=112.995 Ze=-143.55 Az status=0008 Ze status=0009 08:00:40 Check angles 08:00:40 SkyScan query 08:00:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 08:00:40 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 08:00:40 Check angles 08:00:40 SkyScan query 08:00:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 08:00:41 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 08:00:41 Check angles 08:00:41 SkyScan query 08:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.205<-17347 Statuses=0008 0009 08:00:42 Msec=2250 True Az=112.995 Ze=-80.205 Az status=0008 Ze status=0009 08:00:42 Check angles 08:00:42 SkyScan query 08:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.265<-15951 Statuses=0008 0009 08:00:42 Msec=3000 True Az=112.995 Ze=-59.265 Az status=0008 Ze status=0009 08:00:43 Check angles 08:00:43 SkyScan query 08:00:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.28<-14552 Statuses=0008 0009 08:00:43 Msec=3750 True Az=112.995 Ze=-38.28 Az status=0008 Ze status=0009 08:00:43 Check angles 08:00:43 SkyScan query 08:00:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.355<-13157 Statuses=0008 0009 08:00:44 Msec=4500 True Az=112.995 Ze=-17.355 Az status=0008 Ze status=0009 08:00:44 Check angles 08:00:44 SkyScan query 08:00:45 SkyScan query done: ret=0 az=112.995<-7533 ze=3.63<-11758 Statuses=0008 0009 08:00:45 Msec=5250 True Az=112.995 Ze=3.63 Az status=0008 Ze status=0009 08:00:45 Check angles 08:00:45 SkyScan query 08:00:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:00:45 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:00:45 Message to Master queued w/err=0: serial=99282 error=0 08:00:50 Received message from Master: op=Filter serial=99283 08:00:50 Color wheel filter change from 0 to 0 08:00:50 FLIGetFilterPos err=0 currentPosition=0 08:00:50 FLIGetStepsRemaining err=0 RemainingSteps=0 08:00:50 Filter is already there-color wheel unchanged 08:00:51 Received message from Master: op=Shutter serial=99284 08:00:51 Shutter LASER close 08:00:51 Received message from Camera: op=State serial=99286 08:00:51 GetSingleValue result=40 Value=cccccccc 08:00:51 SkyScan query 08:00:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:00:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:51 Parameters OK 08:00:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:51 Set A/D data flow result=40 08:00:51 Set A/D channel type result=40 08:00:51 Set A/D encoding result=40 08:00:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:51 Set channel filter=0.000000e+000 result=40 08:00:51 Config A/D Result=40 08:00:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:51 Get A/D filter: -9.255963e+061 result=40 08:00:51 Get A/D value=-858993460 result=40 08:00:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:51 Parameters OK 08:00:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:51 Set A/D data flow result=40 08:00:51 Set A/D channel type result=40 08:00:51 Set A/D encoding result=40 08:00:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:51 Set channel filter=0.000000e+000 result=40 08:00:51 Config A/D Result=40 08:00:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:51 Get A/D filter: -9.255963e+061 result=40 08:00:51 Get A/D value=-858993460 result=40 08:00:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:00:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:00:51 Aux= 08:00:51 Message to Camera, serial 99286 queued 08:01:28 Received message from Master: op=PointingHead serial=99299 08:01:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:01:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:01:29 Point started: ret=0 08:01:29 point_skyscan result=0 08:01:29 Check angles 08:01:29 SkyScan query 08:01:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:01:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:01:30 Message to Master queued w/err=0: serial=99299 error=0 08:01:35 Received message from Master: op=Filter serial=99300 08:01:35 Color wheel filter change from 0 to 0 08:01:35 FLIGetFilterPos err=0 currentPosition=0 08:01:35 FLIGetStepsRemaining err=0 RemainingSteps=0 08:01:35 Filter is already there-color wheel unchanged 08:01:35 Received message from Master: op=Shutter serial=99301 08:01:35 Shutter LASER close 08:01:35 Received message from Camera: op=State serial=99303 08:01:35 GetSingleValue result=40 Value=cccccccc 08:01:35 SkyScan query 08:01:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:01:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:36 Parameters OK 08:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:36 Set A/D data flow result=40 08:01:36 Set A/D channel type result=40 08:01:36 Set A/D encoding result=40 08:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:36 Set channel filter=0.000000e+000 result=40 08:01:36 Config A/D Result=40 08:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:36 Get A/D filter: -9.255963e+061 result=40 08:01:36 Get A/D value=-858993460 result=40 08:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:36 Parameters OK 08:01:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:36 Set A/D data flow result=40 08:01:36 Set A/D channel type result=40 08:01:36 Set A/D encoding result=40 08:01:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:36 Set channel filter=0.000000e+000 result=40 08:01:36 Config A/D Result=40 08:01:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:36 Get A/D filter: -9.255963e+061 result=40 08:01:36 Get A/D value=-858993460 result=40 08:01:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:01:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:01:36 Aux= 08:01:36 Message to Camera, serial 99303 queued 08:02:13 Received message from Master: op=PointingHead serial=99316 08:02:13 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:02:13 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:02:13 Point started: ret=0 08:02:13 point_skyscan result=0 08:02:14 Check angles 08:02:14 SkyScan query 08:02:14 SkyScan query done: ret=0 az=135.69<-9046 ze=-6.51<-12434 Statuses=0009 0008 08:02:14 Msec=0 True Az=135.69 Ze=-6.51 Az status=0009 Ze status=0008 08:02:14 Check angles 08:02:14 SkyScan query 08:02:15 SkyScan query done: ret=0 az=153.255<-10217 ze=-6.51<-12434 Statuses=0009 0008 08:02:15 Msec=750 True Az=153.255 Ze=-6.51 Az status=0009 Ze status=0008 08:02:15 Check angles 08:02:15 SkyScan query 08:02:16 SkyScan query done: ret=0 az=170.67<-11378 ze=-6.495<-12433 Statuses=0009 0008 08:02:16 Msec=1500 True Az=170.67 Ze=-6.495 Az status=0009 Ze status=0008 08:02:16 Check angles 08:02:16 SkyScan query 08:02:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:02:17 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:02:17 Message to Master queued w/err=0: serial=99316 error=0 08:02:22 Received message from Master: op=Filter serial=99317 08:02:22 Color wheel filter change from 0 to 0 08:02:22 FLIGetFilterPos err=0 currentPosition=0 08:02:22 FLIGetStepsRemaining err=0 RemainingSteps=0 08:02:22 Filter is already there-color wheel unchanged 08:02:22 Received message from Master: op=Shutter serial=99318 08:02:22 Shutter LASER close 08:02:22 Received message from Camera: op=State serial=99320 08:02:22 GetSingleValue result=40 Value=cccccccc 08:02:22 SkyScan query 08:02:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:02:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:22 Parameters OK 08:02:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:22 Set A/D data flow result=40 08:02:22 Set A/D channel type result=40 08:02:22 Set A/D encoding result=40 08:02:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:22 Set channel filter=0.000000e+000 result=40 08:02:22 Config A/D Result=40 08:02:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:22 Get A/D filter: -9.255963e+061 result=40 08:02:22 Get A/D value=-858993460 result=40 08:02:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:22 Parameters OK 08:02:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:22 Set A/D data flow result=40 08:02:22 Set A/D channel type result=40 08:02:22 Set A/D encoding result=40 08:02:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:22 Set channel filter=0.000000e+000 result=40 08:02:22 Config A/D Result=40 08:02:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:22 Get A/D filter: -9.255963e+061 result=40 08:02:22 Get A/D value=-858993460 result=40 08:02:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:02:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:02:22 Aux= 08:02:22 Message to Camera, serial 99320 queued 08:02:59 Received message from Master: op=PointingHead serial=99333 08:02:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:02:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:03:00 Point started: ret=0 08:03:00 point_skyscan result=0 08:03:00 Check angles 08:03:00 SkyScan query 08:03:01 SkyScan query done: ret=0 az=153.015<-10201 ze=6.51<-11566 Statuses=0009 0008 08:03:01 Msec=0 True Az=153.015 Ze=6.51 Az status=0009 Ze status=0008 08:03:01 Check angles 08:03:01 SkyScan query 08:03:02 SkyScan query done: ret=0 az=135.555<-9037 ze=6.495<-11567 Statuses=0009 0008 08:03:02 Msec=750 True Az=135.555 Ze=6.495 Az status=0009 Ze status=0008 08:03:02 Check angles 08:03:02 SkyScan query 08:03:02 SkyScan query done: ret=0 az=118.08<-7872 ze=6.495<-11567 Statuses=0009 0008 08:03:02 Msec=1500 True Az=118.08 Ze=6.495 Az status=0009 Ze status=0008 08:03:03 Check angles 08:03:03 SkyScan query 08:03:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:03:03 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:03:03 Message to Master queued w/err=0: serial=99333 error=0 08:03:08 Received message from Master: op=Filter serial=99334 08:03:08 Color wheel filter change from 0 to 0 08:03:08 FLIGetFilterPos err=0 currentPosition=0 08:03:08 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:08 Filter is already there-color wheel unchanged 08:03:08 Received message from Master: op=Shutter serial=99335 08:03:08 Shutter LASER close 08:03:08 Received message from Camera: op=State serial=99337 08:03:08 GetSingleValue result=40 Value=cccccccc 08:03:08 SkyScan query 08:03:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:03:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:09 Parameters OK 08:03:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:09 Set A/D data flow result=40 08:03:09 Set A/D channel type result=40 08:03:09 Set A/D encoding result=40 08:03:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:09 Set channel filter=0.000000e+000 result=40 08:03:09 Config A/D Result=40 08:03:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:09 Get A/D filter: -9.255963e+061 result=40 08:03:09 Get A/D value=-858993460 result=40 08:03:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:09 Parameters OK 08:03:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:09 Set A/D data flow result=40 08:03:09 Set A/D channel type result=40 08:03:09 Set A/D encoding result=40 08:03:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:09 Set channel filter=0.000000e+000 result=40 08:03:09 Config A/D Result=40 08:03:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:09 Get A/D filter: -9.255963e+061 result=40 08:03:09 Get A/D value=-858993460 result=40 08:03:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:09 Aux= 08:03:09 Message to Camera, serial 99337 queued 08:03:38 Received message from Master: op=Identify serial=99339 08:03:46 Received message from Master: op=PointingHead serial=99353 08:03:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:03:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:03:46 Point started: ret=0 08:03:46 point_skyscan result=0 08:03:47 Check angles 08:03:47 SkyScan query 08:03:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.475<-13565 Statuses=0008 0009 08:03:47 Msec=0 True Az=112.995 Ze=-23.475 Az status=0008 Ze status=0009 08:03:48 Check angles 08:03:48 SkyScan query 08:03:48 SkyScan query done: ret=0 az=112.98<-7532 ze=-44.445<-14963 Statuses=0008 0009 08:03:48 Msec=750 True Az=112.98 Ze=-44.445 Az status=0008 Ze status=0009 08:03:48 Check angles 08:03:48 SkyScan query 08:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 08:03:49 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 08:03:49 Check angles 08:03:49 SkyScan query 08:03:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.835<-17789 Statuses=0008 0009 08:03:50 Msec=2250 True Az=112.995 Ze=-86.835 Az status=0008 Ze status=0009 [UTC 2019-3-4 08:03:50] 08:03:50 Check angles 08:03:50 SkyScan query 08:03:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-109.005<-19267 Statuses=0008 0009 08:03:50 Msec=3000 True Az=112.995 Ze=-109.005 Az status=0008 Ze status=0009 08:03:51 Check angles 08:03:51 SkyScan query 08:03:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.655<-20577 Statuses=0008 0009 08:03:51 Msec=3750 True Az=112.995 Ze=-128.655 Az status=0008 Ze status=0009 08:03:51 Check angles 08:03:51 SkyScan query 08:03:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.655<-21977 Statuses=0008 0009 08:03:52 Msec=4500 True Az=112.995 Ze=-149.655 Az status=0008 Ze status=0009 08:03:52 Check angles 08:03:52 SkyScan query 08:03:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.565<-23371 Statuses=0008 0009 08:03:53 Msec=5250 True Az=112.995 Ze=-170.565 Az status=0008 Ze status=0009 08:03:53 Check angles 08:03:53 SkyScan query 08:03:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:03:53 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:03:53 Message to Master queued w/err=0: serial=99353 error=0 08:03:58 Received message from Master: op=Filter serial=99354 08:03:58 Color wheel filter change from 0 to 0 08:03:58 FLIGetFilterPos err=0 currentPosition=0 08:03:58 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:58 Filter is already there-color wheel unchanged 08:03:59 Received message from Master: op=Shutter serial=99355 08:03:59 Shutter LASER open 08:03:59 Received message from Camera: op=State serial=99357 08:03:59 GetSingleValue result=40 Value=cccccccc 08:03:59 SkyScan query 08:03:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:03:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:59 Parameters OK 08:03:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:59 Set A/D data flow result=40 08:03:59 Set A/D channel type result=40 08:03:59 Set A/D encoding result=40 08:03:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:59 Set channel filter=0.000000e+000 result=40 08:03:59 Config A/D Result=40 08:03:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:59 Get A/D filter: -9.255963e+061 result=40 08:03:59 Get A/D value=-858993460 result=40 08:03:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:59 Parameters OK 08:03:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:59 Set A/D data flow result=40 08:03:59 Set A/D channel type result=40 08:03:59 Set A/D encoding result=40 08:03:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:59 Set channel filter=0.000000e+000 result=40 08:03:59 Config A/D Result=40 08:03:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:59 Get A/D filter: -9.255963e+061 result=40 08:03:59 Get A/D value=-858993460 result=40 08:03:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:59 Aux= 08:03:59 Message to Camera, serial 99357 queued 08:04:08 Received message from Master: op=Shutter serial=99367 08:04:08 Shutter LASER close 08:04:08 Received message from Master: op=PointingHead serial=99371 08:04:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:04:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:04:09 Point started: ret=0 08:04:09 point_skyscan result=0 08:04:09 Check angles 08:04:09 SkyScan query 08:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 08:04:10 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 08:04:10 Check angles 08:04:10 SkyScan query 08:04:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.115<-20141 Statuses=0008 0009 08:04:11 Msec=750 True Az=112.995 Ze=-122.115 Az status=0008 Ze status=0009 08:04:11 Check angles 08:04:11 SkyScan query 08:04:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.725<-18715 Statuses=0008 0009 08:04:11 Msec=1500 True Az=112.995 Ze=-100.725 Az status=0008 Ze status=0009 08:04:12 Check angles 08:04:12 SkyScan query 08:04:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.74<-17316 Statuses=0008 0009 08:04:12 Msec=2250 True Az=112.995 Ze=-79.74 Az status=0008 Ze status=0009 08:04:12 Check angles 08:04:12 SkyScan query 08:04:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.815<-15921 Statuses=0008 0009 08:04:13 Msec=3000 True Az=112.995 Ze=-58.815 Az status=0008 Ze status=0009 08:04:13 Check angles 08:04:13 SkyScan query 08:04:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.425<-14495 Statuses=0008 0009 08:04:14 Msec=3750 True Az=112.995 Ze=-37.425 Az status=0008 Ze status=0009 08:04:14 Check angles 08:04:14 SkyScan query 08:04:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.455<-13097 Statuses=0008 0009 08:04:14 Msec=4500 True Az=112.995 Ze=-16.455 Az status=0008 Ze status=0009 08:04:15 Check angles 08:04:15 SkyScan query 08:04:15 SkyScan query done: ret=0 az=113.01<-7534 ze=4.41<-11706 Statuses=0008 0009 08:04:15 Msec=5250 True Az=113.01 Ze=4.41 Az status=0008 Ze status=0009 08:04:15 Check angles 08:04:15 SkyScan query 08:04:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:04:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:04:16 Message to Master queued w/err=0: serial=99371 error=0 08:04:21 Received message from Master: op=Filter serial=99372 08:04:21 Color wheel filter change from 0 to 0 08:04:21 FLIGetFilterPos err=0 currentPosition=0 08:04:21 FLIGetStepsRemaining err=0 RemainingSteps=0 08:04:21 Filter is already there-color wheel unchanged 08:04:21 Received message from Master: op=Shutter serial=99373 08:04:21 Shutter LASER close 08:04:21 Received message from Camera: op=State serial=99375 08:04:21 GetSingleValue result=40 Value=cccccccc 08:04:21 SkyScan query 08:04:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:04:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:22 Parameters OK 08:04:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:22 Set A/D data flow result=40 08:04:22 Set A/D channel type result=40 08:04:22 Set A/D encoding result=40 08:04:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:22 Set channel filter=0.000000e+000 result=40 08:04:22 Config A/D Result=40 08:04:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:22 Get A/D filter: -9.255963e+061 result=40 08:04:22 Get A/D value=-858993460 result=40 08:04:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:22 Parameters OK 08:04:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:22 Set A/D data flow result=40 08:04:22 Set A/D channel type result=40 08:04:22 Set A/D encoding result=40 08:04:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:22 Set channel filter=0.000000e+000 result=40 08:04:22 Config A/D Result=40 08:04:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:22 Get A/D filter: -9.255963e+061 result=40 08:04:22 Get A/D value=-858993460 result=40 08:04:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:04:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:04:22 Aux= 08:04:22 Message to Camera, serial 99375 queued 08:04:58 Received message from Master: op=PointingHead serial=99387 08:04:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:04:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:04:58 Point started: ret=0 08:04:58 point_skyscan result=0 08:04:59 Check angles 08:04:59 SkyScan query 08:04:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:04:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:04:59 Message to Master queued w/err=0: serial=99387 error=0 08:05:04 Received message from Master: op=Filter serial=99388 08:05:04 Color wheel filter change from 0 to 0 08:05:04 FLIGetFilterPos err=0 currentPosition=0 08:05:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:04 Filter is already there-color wheel unchanged 08:05:05 Received message from Master: op=Shutter serial=99389 08:05:05 Shutter LASER close 08:05:05 Received message from Camera: op=State serial=99391 08:05:05 GetSingleValue result=40 Value=cccccccc 08:05:05 SkyScan query 08:05:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:05:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:05 Parameters OK 08:05:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:05 Set A/D data flow result=40 08:05:05 Set A/D channel type result=40 08:05:05 Set A/D encoding result=40 08:05:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:05 Set channel filter=0.000000e+000 result=40 08:05:05 Config A/D Result=40 08:05:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:05 Get A/D filter: -9.255963e+061 result=40 08:05:05 Get A/D value=-858993460 result=40 08:05:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:05 Parameters OK 08:05:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:05 Set A/D data flow result=40 08:05:05 Set A/D channel type result=40 08:05:05 Set A/D encoding result=40 08:05:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:05 Set channel filter=0.000000e+000 result=40 08:05:05 Config A/D Result=40 08:05:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:05 Get A/D filter: -9.255963e+061 result=40 08:05:05 Get A/D value=-858993460 result=40 08:05:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:05 Aux= 08:05:05 Message to Camera, serial 99391 queued 08:05:42 Received message from Master: op=PointingHead serial=99404 08:05:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:05:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:05:42 Point started: ret=0 08:05:42 point_skyscan result=0 08:05:43 Check angles 08:05:43 SkyScan query 08:05:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:05:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:05:44 Message to Master queued w/err=0: serial=99404 error=0 08:05:49 Received message from Master: op=Filter serial=99405 08:05:49 Color wheel filter change from 0 to 0 08:05:49 FLIGetFilterPos err=0 currentPosition=0 08:05:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:49 Filter is already there-color wheel unchanged 08:05:49 Received message from Master: op=Shutter serial=99406 08:05:49 Shutter LASER close 08:05:49 Received message from Camera: op=State serial=99408 08:05:49 GetSingleValue result=40 Value=cccccccc 08:05:49 SkyScan query 08:05:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:05:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:49 Parameters OK 08:05:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:49 Set A/D data flow result=40 08:05:49 Set A/D channel type result=40 08:05:49 Set A/D encoding result=40 08:05:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:49 Set channel filter=0.000000e+000 result=40 08:05:49 Config A/D Result=40 08:05:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:49 Get A/D filter: -9.255963e+061 result=40 08:05:49 Get A/D value=-858993460 result=40 08:05:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:49 Parameters OK 08:05:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:49 Set A/D data flow result=40 08:05:49 Set A/D channel type result=40 08:05:49 Set A/D encoding result=40 08:05:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:49 Set channel filter=0.000000e+000 result=40 08:05:49 Config A/D Result=40 08:05:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:49 Get A/D filter: -9.255963e+061 result=40 08:05:49 Get A/D value=-858993460 result=40 08:05:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:49 Aux= 08:05:49 Message to Camera, serial 99408 queued 08:06:26 Received message from Master: op=PointingHead serial=99421 08:06:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:06:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:06:27 Point started: ret=0 08:06:27 point_skyscan result=0 08:06:27 Check angles 08:06:27 SkyScan query 08:06:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:06:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:06:28 Message to Master queued w/err=0: serial=99421 error=0 08:06:33 Received message from Master: op=Filter serial=99422 08:06:33 Color wheel filter change from 0 to 0 08:06:33 FLIGetFilterPos err=0 currentPosition=0 08:06:33 FLIGetStepsRemaining err=0 RemainingSteps=0 08:06:33 Filter is already there-color wheel unchanged 08:06:33 Received message from Master: op=Shutter serial=99423 08:06:33 Shutter LASER close 08:06:33 Received message from Camera: op=State serial=99425 08:06:33 GetSingleValue result=40 Value=cccccccc 08:06:33 SkyScan query 08:06:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:06:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:34 Parameters OK 08:06:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:34 Set A/D data flow result=40 08:06:34 Set A/D channel type result=40 08:06:34 Set A/D encoding result=40 08:06:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:34 Set channel filter=0.000000e+000 result=40 08:06:34 Config A/D Result=40 08:06:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:34 Get A/D filter: -9.255963e+061 result=40 08:06:34 Get A/D value=-858993460 result=40 08:06:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:34 Parameters OK 08:06:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:34 Set A/D data flow result=40 08:06:34 Set A/D channel type result=40 08:06:34 Set A/D encoding result=40 08:06:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:34 Set channel filter=0.000000e+000 result=40 08:06:34 Config A/D Result=40 08:06:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:34 Get A/D filter: -9.255963e+061 result=40 08:06:34 Get A/D value=-858993460 result=40 08:06:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:06:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:06:34 Aux= 08:06:34 Message to Camera, serial 99425 queued 08:07:11 Received message from Master: op=PointingHead serial=99438 08:07:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:07:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:07:11 Point started: ret=0 08:07:11 point_skyscan result=0 08:07:12 Check angles 08:07:12 SkyScan query 08:07:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.19<-13546 Statuses=0008 0009 08:07:12 Msec=0 True Az=112.995 Ze=-23.19 Az status=0008 Ze status=0009 08:07:13 Check angles 08:07:13 SkyScan query 08:07:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.205<-14947 Statuses=0008 0009 08:07:13 Msec=750 True Az=112.995 Ze=-44.205 Az status=0008 Ze status=0009 08:07:13 Check angles 08:07:13 SkyScan query 08:07:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.13<-16342 Statuses=0008 0009 08:07:14 Msec=1500 True Az=112.995 Ze=-65.13 Az status=0008 Ze status=0009 08:07:14 Check angles 08:07:14 SkyScan query 08:07:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.085<-17739 Statuses=0008 0009 08:07:15 Msec=2250 True Az=112.995 Ze=-86.085 Az status=0008 Ze status=0009 08:07:15 Check angles 08:07:15 SkyScan query 08:07:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.025<-19135 Statuses=0008 0009 08:07:15 Msec=3000 True Az=112.995 Ze=-107.025 Az status=0008 Ze status=0009 08:07:16 Check angles 08:07:16 SkyScan query 08:07:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.37<-20558 Statuses=0008 0009 08:07:16 Msec=3750 True Az=112.995 Ze=-128.37 Az status=0008 Ze status=0009 08:07:16 Check angles 08:07:16 SkyScan query 08:07:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.355<-21957 Statuses=0008 0009 08:07:17 Msec=4500 True Az=112.995 Ze=-149.355 Az status=0008 Ze status=0009 08:07:17 Check angles 08:07:17 SkyScan query 08:07:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.295<-23353 Statuses=0008 0009 08:07:18 Msec=5250 True Az=112.995 Ze=-170.295 Az status=0008 Ze status=0009 08:07:18 Check angles 08:07:18 SkyScan query 08:07:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:07:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:07:18 Message to Master queued w/err=0: serial=99438 error=0 08:07:23 Received message from Master: op=Filter serial=99439 08:07:23 Color wheel filter change from 0 to 0 08:07:23 FLIGetFilterPos err=0 currentPosition=0 08:07:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:23 Filter is already there-color wheel unchanged 08:07:24 Received message from Master: op=Shutter serial=99440 08:07:24 Shutter LASER open 08:07:24 Received message from Camera: op=State serial=99442 08:07:24 GetSingleValue result=40 Value=cccccccc 08:07:24 SkyScan query 08:07:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:07:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:24 Parameters OK 08:07:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:24 Set A/D data flow result=40 08:07:24 Set A/D channel type result=40 08:07:24 Set A/D encoding result=40 08:07:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:24 Set channel filter=0.000000e+000 result=40 08:07:24 Config A/D Result=40 08:07:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:24 Get A/D filter: -9.255963e+061 result=40 08:07:24 Get A/D value=-858993460 result=40 08:07:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:24 Parameters OK 08:07:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:24 Set A/D data flow result=40 08:07:24 Set A/D channel type result=40 08:07:24 Set A/D encoding result=40 08:07:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:24 Set channel filter=0.000000e+000 result=40 08:07:24 Config A/D Result=40 08:07:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:24 Get A/D filter: -9.255963e+061 result=40 08:07:24 Get A/D value=-858993460 result=40 08:07:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:24 Aux= 08:07:24 Message to Camera, serial 99442 queued 08:07:33 Received message from Master: op=Shutter serial=99452 08:07:33 Shutter LASER close 08:07:33 Received message from Master: op=PointingHead serial=99456 08:07:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:07:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:07:34 Point started: ret=0 08:07:34 point_skyscan result=0 08:07:34 Check angles 08:07:34 SkyScan query 08:07:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 08:07:35 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 08:07:35 Check angles 08:07:35 SkyScan query 08:07:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.445<-20163 Statuses=0008 0009 08:07:36 Msec=750 True Az=112.995 Ze=-122.445 Az status=0008 Ze status=0009 08:07:36 Check angles 08:07:36 SkyScan query 08:07:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.475<-18765 Statuses=0008 0009 08:07:37 Msec=1500 True Az=112.995 Ze=-101.475 Az status=0008 Ze status=0009 08:07:37 Check angles 08:07:37 SkyScan query 08:07:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.49<-17366 Statuses=0008 0009 08:07:37 Msec=2250 True Az=112.995 Ze=-80.49 Az status=0008 Ze status=0009 08:07:37 Check angles 08:07:37 SkyScan query 08:07:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.565<-15971 Statuses=0008 0009 08:07:38 Msec=3000 True Az=112.995 Ze=-59.565 Az status=0008 Ze status=0009 08:07:38 Check angles 08:07:38 SkyScan query 08:07:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.595<-14573 Statuses=0008 0009 08:07:39 Msec=3750 True Az=112.995 Ze=-38.595 Az status=0008 Ze status=0009 08:07:39 Check angles 08:07:39 SkyScan query 08:07:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.64<-13176 Statuses=0008 0009 08:07:40 Msec=4500 True Az=112.995 Ze=-17.64 Az status=0008 Ze status=0009 08:07:40 Check angles 08:07:40 SkyScan query 08:07:40 SkyScan query done: ret=0 az=112.98<-7532 ze=3.33<-11778 Statuses=0008 0009 08:07:40 Msec=5250 True Az=112.98 Ze=3.33 Az status=0008 Ze status=0009 08:07:40 Check angles 08:07:40 SkyScan query 08:07:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:07:41 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:07:41 Message to Master queued w/err=0: serial=99456 error=0 08:07:46 Received message from Master: op=Filter serial=99457 08:07:46 Color wheel filter change from 0 to 0 08:07:46 FLIGetFilterPos err=0 currentPosition=0 08:07:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:46 Filter is already there-color wheel unchanged 08:07:46 Received message from Master: op=Shutter serial=99458 08:07:46 Shutter LASER close 08:07:46 Received message from Camera: op=State serial=99460 08:07:46 GetSingleValue result=40 Value=cccccccc 08:07:46 SkyScan query 08:07:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:07:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:47 Parameters OK 08:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:47 Set A/D data flow result=40 08:07:47 Set A/D channel type result=40 08:07:47 Set A/D encoding result=40 08:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:47 Set channel filter=0.000000e+000 result=40 08:07:47 Config A/D Result=40 08:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:47 Get A/D filter: -9.255963e+061 result=40 08:07:47 Get A/D value=-858993460 result=40 08:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:47 Parameters OK 08:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:47 Set A/D data flow result=40 08:07:47 Set A/D channel type result=40 08:07:47 Set A/D encoding result=40 08:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:47 Set channel filter=0.000000e+000 result=40 08:07:47 Config A/D Result=40 08:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:47 Get A/D filter: -9.255963e+061 result=40 08:07:47 Get A/D value=-858993460 result=40 08:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:47 Aux= 08:07:47 Message to Camera, serial 99460 queued 08:08:24 Received message from Master: op=PointingHead serial=99473 08:08:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:08:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:08:24 Point started: ret=0 08:08:24 point_skyscan result=0 08:08:25 Check angles 08:08:25 SkyScan query 08:08:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:08:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:08:25 Message to Master queued w/err=0: serial=99473 error=0 08:08:30 Received message from Master: op=Filter serial=99474 08:08:30 Color wheel filter change from 0 to 0 08:08:30 FLIGetFilterPos err=0 currentPosition=0 08:08:30 FLIGetStepsRemaining err=0 RemainingSteps=0 08:08:30 Filter is already there-color wheel unchanged 08:08:31 Received message from Master: op=Shutter serial=99475 08:08:31 Shutter LASER close 08:08:31 Received message from Camera: op=State serial=99477 08:08:31 GetSingleValue result=40 Value=cccccccc 08:08:31 SkyScan query 08:08:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:08:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:31 Parameters OK 08:08:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:31 Set A/D data flow result=40 08:08:31 Set A/D channel type result=40 08:08:31 Set A/D encoding result=40 08:08:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:31 Set channel filter=0.000000e+000 result=40 08:08:31 Config A/D Result=40 08:08:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:31 Get A/D filter: -9.255963e+061 result=40 08:08:31 Get A/D value=-858993460 result=40 08:08:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:31 Parameters OK 08:08:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:31 Set A/D data flow result=40 08:08:31 Set A/D channel type result=40 08:08:31 Set A/D encoding result=40 08:08:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:31 Set channel filter=0.000000e+000 result=40 08:08:31 Config A/D Result=40 08:08:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:31 Get A/D filter: -9.255963e+061 result=40 08:08:31 Get A/D value=-858993460 result=40 08:08:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:08:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:08:31 Aux= 08:08:31 Message to Camera, serial 99477 queued 08:09:08 Received message from Master: op=PointingHead serial=99490 08:09:08 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:09:08 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:09:08 Point started: ret=0 08:09:08 point_skyscan result=0 08:09:09 Check angles 08:09:09 SkyScan query 08:09:10 SkyScan query done: ret=0 az=135.705<-9047 ze=-6.51<-12434 Statuses=0009 0008 08:09:10 Msec=0 True Az=135.705 Ze=-6.51 Az status=0009 Ze status=0008 08:09:10 Check angles 08:09:10 SkyScan query 08:09:11 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.495<-12433 Statuses=0009 0008 08:09:11 Msec=750 True Az=153.525 Ze=-6.495 Az status=0009 Ze status=0008 08:09:11 Check angles 08:09:11 SkyScan query 08:09:11 SkyScan query done: ret=0 az=170.985<-11399 ze=-6.495<-12433 Statuses=0009 0008 08:09:11 Msec=1500 True Az=170.985 Ze=-6.495 Az status=0009 Ze status=0008 08:09:11 Check angles 08:09:11 SkyScan query 08:09:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:09:12 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:09:12 Message to Master queued w/err=0: serial=99490 error=0 08:09:17 Received message from Master: op=Filter serial=99491 08:09:17 Color wheel filter change from 0 to 0 08:09:17 FLIGetFilterPos err=0 currentPosition=0 08:09:17 FLIGetStepsRemaining err=0 RemainingSteps=0 08:09:17 Filter is already there-color wheel unchanged 08:09:17 Received message from Master: op=Shutter serial=99492 08:09:17 Shutter LASER close 08:09:17 Received message from Camera: op=State serial=99494 08:09:17 GetSingleValue result=40 Value=cccccccc 08:09:17 SkyScan query 08:09:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:09:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:18 Parameters OK 08:09:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:18 Set A/D data flow result=40 08:09:18 Set A/D channel type result=40 08:09:18 Set A/D encoding result=40 08:09:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:18 Set channel filter=0.000000e+000 result=40 08:09:18 Config A/D Result=40 08:09:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:18 Get A/D filter: -9.255963e+061 result=40 08:09:18 Get A/D value=-858993460 result=40 08:09:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:18 Parameters OK 08:09:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:18 Set A/D data flow result=40 08:09:18 Set A/D channel type result=40 08:09:18 Set A/D encoding result=40 08:09:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:18 Set channel filter=0.000000e+000 result=40 08:09:18 Config A/D Result=40 08:09:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:18 Get A/D filter: -9.255963e+061 result=40 08:09:18 Get A/D value=-858993460 result=40 08:09:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:09:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:09:18 Aux= 08:09:18 Message to Camera, serial 99494 queued 08:09:55 Received message from Master: op=PointingHead serial=99507 08:09:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:09:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:09:55 Point started: ret=0 08:09:55 point_skyscan result=0 08:09:56 Check angles 08:09:56 SkyScan query 08:09:56 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 08:09:56 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 08:09:56 Check angles 08:09:56 SkyScan query 08:09:57 SkyScan query done: ret=0 az=135.465<-9031 ze=6.495<-11567 Statuses=0009 0008 08:09:57 Msec=750 True Az=135.465 Ze=6.495 Az status=0009 Ze status=0008 08:09:57 Check angles 08:09:57 SkyScan query 08:09:58 SkyScan query done: ret=0 az=117.99<-7866 ze=6.495<-11567 Statuses=0009 0008 08:09:58 Msec=1500 True Az=117.99 Ze=6.495 Az status=0009 Ze status=0008 08:09:58 Check angles 08:09:58 SkyScan query 08:09:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:09:59 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:09:59 Message to Master queued w/err=0: serial=99507 error=0 08:10:04 Received message from Master: op=Filter serial=99508 08:10:04 Color wheel filter change from 0 to 0 08:10:04 FLIGetFilterPos err=0 currentPosition=0 08:10:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:04 Filter is already there-color wheel unchanged 08:10:04 Received message from Master: op=Shutter serial=99509 08:10:04 Shutter LASER close 08:10:04 Received message from Camera: op=State serial=99511 08:10:04 GetSingleValue result=40 Value=cccccccc 08:10:04 SkyScan query 08:10:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:10:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:04 Parameters OK 08:10:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:04 Set A/D data flow result=40 08:10:04 Set A/D channel type result=40 08:10:04 Set A/D encoding result=40 08:10:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:04 Set channel filter=0.000000e+000 result=40 08:10:04 Config A/D Result=40 08:10:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:04 Get A/D filter: -9.255963e+061 result=40 08:10:04 Get A/D value=-858993460 result=40 08:10:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:04 Parameters OK 08:10:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:04 Set A/D data flow result=40 08:10:04 Set A/D channel type result=40 08:10:04 Set A/D encoding result=40 08:10:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:04 Set channel filter=0.000000e+000 result=40 08:10:04 Config A/D Result=40 08:10:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:04 Get A/D filter: -9.255963e+061 result=40 08:10:04 Get A/D value=-858993460 result=40 08:10:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:04 Aux= 08:10:04 Message to Camera, serial 99511 queued 08:10:41 Received message from Master: op=PointingHead serial=99524 08:10:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:10:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:10:42 Point started: ret=0 08:10:42 point_skyscan result=0 08:10:42 Check angles 08:10:42 SkyScan query 08:10:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.625<-13575 Statuses=0008 0009 08:10:43 Msec=0 True Az=112.995 Ze=-23.625 Az status=0008 Ze status=0009 08:10:43 Check angles 08:10:43 SkyScan query 08:10:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 08:10:44 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 08:10:44 Check angles 08:10:44 SkyScan query 08:10:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.535<-16369 Statuses=0008 0009 08:10:44 Msec=1500 True Az=112.995 Ze=-65.535 Az status=0008 Ze status=0009 08:10:45 Check angles 08:10:45 SkyScan query 08:10:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.445<-17763 Statuses=0008 0009 08:10:45 Msec=2250 True Az=112.995 Ze=-86.445 Az status=0008 Ze status=0009 08:10:45 Check angles 08:10:45 SkyScan query 08:10:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.88<-19192 Statuses=0008 0009 08:10:46 Msec=3000 True Az=112.995 Ze=-107.88 Az status=0008 Ze status=0009 08:10:46 Check angles 08:10:46 SkyScan query 08:10:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.3<-20620 Statuses=0008 0009 08:10:47 Msec=3750 True Az=112.995 Ze=-129.3 Az status=0008 Ze status=0009 08:10:47 Check angles 08:10:47 SkyScan query 08:10:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.615<-22041 Statuses=0008 0009 08:10:47 Msec=4500 True Az=112.995 Ze=-150.615 Az status=0008 Ze status=0009 08:10:48 Check angles 08:10:48 SkyScan query 08:10:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.36<-23424 Statuses=0008 0009 08:10:48 Msec=5250 True Az=112.995 Ze=-171.36 Az status=0008 Ze status=0009 08:10:48 Check angles 08:10:48 SkyScan query 08:10:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:10:49 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:10:49 Message to Master queued w/err=0: serial=99524 error=0 08:10:54 Received message from Master: op=Filter serial=99525 08:10:54 Color wheel filter change from 0 to 0 08:10:54 FLIGetFilterPos err=0 currentPosition=0 08:10:54 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:54 Filter is already there-color wheel unchanged 08:10:54 Received message from Master: op=Shutter serial=99526 08:10:54 Shutter LASER open 08:10:54 Received message from Camera: op=State serial=99528 08:10:54 GetSingleValue result=40 Value=cccccccc 08:10:54 SkyScan query 08:10:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:10:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:55 Parameters OK 08:10:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:55 Set A/D data flow result=40 08:10:55 Set A/D channel type result=40 08:10:55 Set A/D encoding result=40 08:10:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:55 Set channel filter=0.000000e+000 result=40 08:10:55 Config A/D Result=40 08:10:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:55 Get A/D filter: -9.255963e+061 result=40 08:10:55 Get A/D value=-858993460 result=40 08:10:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:55 Parameters OK 08:10:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:55 Set A/D data flow result=40 08:10:55 Set A/D channel type result=40 08:10:55 Set A/D encoding result=40 08:10:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:55 Set channel filter=0.000000e+000 result=40 08:10:55 Config A/D Result=40 08:10:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:55 Get A/D filter: -9.255963e+061 result=40 08:10:55 Get A/D value=-858993460 result=40 08:10:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:55 Aux= 08:10:55 Message to Camera, serial 99528 queued 08:11:03 Received message from Master: op=Shutter serial=99538 08:11:03 Shutter LASER close 08:11:04 Received message from Master: op=PointingHead serial=99542 08:11:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:11:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:11:04 Point started: ret=0 08:11:04 point_skyscan result=0 08:11:05 Check angles 08:11:05 SkyScan query 08:11:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 08:11:05 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 08:11:06 Check angles 08:11:06 SkyScan query 08:11:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.4<-20160 Statuses=0008 0009 08:11:06 Msec=750 True Az=112.995 Ze=-122.4 Az status=0008 Ze status=0009 08:11:06 Check angles 08:11:06 SkyScan query 08:11:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.98<-18732 Statuses=0008 0009 08:11:07 Msec=1500 True Az=112.995 Ze=-100.98 Az status=0008 Ze status=0009 08:11:07 Check angles 08:11:07 SkyScan query 08:11:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.025<-17335 Statuses=0008 0009 08:11:08 Msec=2250 True Az=112.995 Ze=-80.025 Az status=0008 Ze status=0009 08:11:08 Check angles 08:11:08 SkyScan query 08:11:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.085<-15939 Statuses=0008 0009 08:11:08 Msec=3000 True Az=112.995 Ze=-59.085 Az status=0008 Ze status=0009 08:11:09 Check angles 08:11:09 SkyScan query 08:11:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.635<-14509 Statuses=0008 0009 08:11:09 Msec=3750 True Az=112.995 Ze=-37.635 Az status=0008 Ze status=0009 08:11:09 Check angles 08:11:09 SkyScan query 08:11:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.275<-13085 Statuses=0008 0009 08:11:10 Msec=4500 True Az=112.995 Ze=-16.275 Az status=0008 Ze status=0009 08:11:10 Check angles 08:11:10 SkyScan query 08:11:11 SkyScan query done: ret=0 az=112.995<-7533 ze=4.545<-11697 Statuses=0008 0009 08:11:11 Msec=5250 True Az=112.995 Ze=4.545 Az status=0008 Ze status=0009 08:11:11 Check angles 08:11:11 SkyScan query 08:11:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:11:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:11:11 Message to Master queued w/err=0: serial=99542 error=0 08:11:16 Received message from Master: op=Filter serial=99543 08:11:16 Color wheel filter change from 0 to 0 08:11:16 FLIGetFilterPos err=0 currentPosition=0 08:11:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:11:16 Filter is already there-color wheel unchanged 08:11:17 Received message from Master: op=Shutter serial=99544 08:11:17 Shutter LASER close 08:11:17 Received message from Camera: op=State serial=99546 08:11:17 GetSingleValue result=40 Value=cccccccc 08:11:17 SkyScan query 08:11:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:11:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:17 Parameters OK 08:11:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:17 Set A/D data flow result=40 08:11:17 Set A/D channel type result=40 08:11:17 Set A/D encoding result=40 08:11:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:17 Set channel filter=0.000000e+000 result=40 08:11:17 Config A/D Result=40 08:11:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:17 Get A/D filter: -9.255963e+061 result=40 08:11:17 Get A/D value=-858993460 result=40 08:11:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:17 Parameters OK 08:11:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:17 Set A/D data flow result=40 08:11:17 Set A/D channel type result=40 08:11:17 Set A/D encoding result=40 08:11:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:17 Set channel filter=0.000000e+000 result=40 08:11:17 Config A/D Result=40 08:11:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:17 Get A/D filter: -9.255963e+061 result=40 08:11:17 Get A/D value=-858993460 result=40 08:11:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:11:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:11:17 Aux= 08:11:17 Message to Camera, serial 99546 queued 08:11:53 Received message from Master: op=PointingHead serial=99558 08:11:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:11:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:11:54 Point started: ret=0 08:11:54 point_skyscan result=0 08:11:54 Check angles 08:11:54 SkyScan query 08:11:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:11:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:11:55 Message to Master queued w/err=0: serial=99558 error=0 08:12:00 Received message from Master: op=Filter serial=99559 08:12:00 Color wheel filter change from 0 to 0 08:12:00 FLIGetFilterPos err=0 currentPosition=0 08:12:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:00 Filter is already there-color wheel unchanged 08:12:00 Received message from Master: op=Shutter serial=99560 08:12:00 Shutter LASER close 08:12:00 Received message from Camera: op=State serial=99562 08:12:00 GetSingleValue result=40 Value=cccccccc 08:12:00 SkyScan query 08:12:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:12:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:01 Parameters OK 08:12:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:01 Set A/D data flow result=40 08:12:01 Set A/D channel type result=40 08:12:01 Set A/D encoding result=40 08:12:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:01 Set channel filter=0.000000e+000 result=40 08:12:01 Config A/D Result=40 08:12:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:01 Get A/D filter: -9.255963e+061 result=40 08:12:01 Get A/D value=-858993460 result=40 08:12:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:01 Parameters OK 08:12:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:01 Set A/D data flow result=40 08:12:01 Set A/D channel type result=40 08:12:01 Set A/D encoding result=40 08:12:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:01 Set channel filter=0.000000e+000 result=40 08:12:01 Config A/D Result=40 08:12:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:01 Get A/D filter: -9.255963e+061 result=40 08:12:01 Get A/D value=-858993460 result=40 08:12:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:01 Aux= 08:12:01 Message to Camera, serial 99562 queued 08:12:38 Received message from Master: op=PointingHead serial=99575 08:12:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:12:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:12:38 Point started: ret=0 08:12:38 point_skyscan result=0 08:12:39 Check angles 08:12:39 SkyScan query 08:12:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:12:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:12:39 Message to Master queued w/err=0: serial=99575 error=0 08:12:44 Received message from Master: op=Filter serial=99576 08:12:44 Color wheel filter change from 0 to 0 08:12:44 FLIGetFilterPos err=0 currentPosition=0 08:12:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:44 Filter is already there-color wheel unchanged 08:12:44 Received message from Master: op=Shutter serial=99577 08:12:44 Shutter LASER close 08:12:44 Received message from Camera: op=State serial=99579 08:12:44 GetSingleValue result=40 Value=cccccccc 08:12:44 SkyScan query 08:12:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:12:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:45 Parameters OK 08:12:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:45 Set A/D data flow result=40 08:12:45 Set A/D channel type result=40 08:12:45 Set A/D encoding result=40 08:12:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:45 Set channel filter=0.000000e+000 result=40 08:12:45 Config A/D Result=40 08:12:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:45 Get A/D filter: -9.255963e+061 result=40 08:12:45 Get A/D value=-858993460 result=40 08:12:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:45 Parameters OK 08:12:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:45 Set A/D data flow result=40 08:12:45 Set A/D channel type result=40 08:12:45 Set A/D encoding result=40 08:12:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:45 Set channel filter=0.000000e+000 result=40 08:12:45 Config A/D Result=40 08:12:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:45 Get A/D filter: -9.255963e+061 result=40 08:12:45 Get A/D value=-858993460 result=40 08:12:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:45 Aux= 08:12:45 Message to Camera, serial 99579 queued 08:13:22 Received message from Master: op=PointingHead serial=99592 08:13:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:13:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:13:22 Point started: ret=0 08:13:22 point_skyscan result=0 08:13:23 Check angles 08:13:23 SkyScan query 08:13:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:13:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:13:24 Message to Master queued w/err=0: serial=99592 error=0 08:13:29 Received message from Master: op=Filter serial=99593 08:13:29 Color wheel filter change from 0 to 0 08:13:29 FLIGetFilterPos err=0 currentPosition=0 08:13:29 FLIGetStepsRemaining err=0 RemainingSteps=0 08:13:29 Filter is already there-color wheel unchanged 08:13:29 Received message from Master: op=Shutter serial=99594 08:13:29 Shutter LASER close 08:13:29 Received message from Camera: op=State serial=99596 08:13:29 GetSingleValue result=40 Value=cccccccc 08:13:29 SkyScan query 08:13:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:13:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:29 Parameters OK 08:13:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:29 Set A/D data flow result=40 08:13:29 Set A/D channel type result=40 08:13:29 Set A/D encoding result=40 08:13:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:29 Set channel filter=0.000000e+000 result=40 08:13:29 Config A/D Result=40 08:13:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:29 Get A/D filter: -9.255963e+061 result=40 08:13:29 Get A/D value=-858993460 result=40 08:13:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:29 Parameters OK 08:13:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:29 Set A/D data flow result=40 08:13:29 Set A/D channel type result=40 08:13:29 Set A/D encoding result=40 08:13:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:29 Set channel filter=0.000000e+000 result=40 08:13:29 Config A/D Result=40 08:13:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:29 Get A/D filter: -9.255963e+061 result=40 08:13:29 Get A/D value=-858993460 result=40 08:13:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:13:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:13:29 Aux= 08:13:29 Message to Camera, serial 99596 queued 08:14:06 Received message from Master: op=PointingHead serial=99609 08:14:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:14:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:14:06 Point started: ret=0 08:14:06 point_skyscan result=0 08:14:07 Check angles 08:14:07 SkyScan query 08:14:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 08:14:08 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 08:14:08 Check angles 08:14:08 SkyScan query 08:14:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.325<-14955 Statuses=0008 0009 08:14:09 Msec=750 True Az=112.995 Ze=-44.325 Az status=0008 Ze status=0009 08:14:09 Check angles 08:14:09 SkyScan query 08:14:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.25<-16350 Statuses=0008 0009 08:14:09 Msec=1500 True Az=112.995 Ze=-65.25 Az status=0008 Ze status=0009 08:14:09 Check angles 08:14:09 SkyScan query 08:14:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.205<-17747 Statuses=0008 0009 08:14:10 Msec=2250 True Az=112.995 Ze=-86.205 Az status=0008 Ze status=0009 08:14:10 Check angles 08:14:10 SkyScan query 08:14:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.145<-19143 Statuses=0008 0009 08:14:11 Msec=3000 True Az=112.995 Ze=-107.145 Az status=0008 Ze status=0009 08:14:11 Check angles 08:14:11 SkyScan query 08:14:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.085<-20539 Statuses=0008 0009 08:14:12 Msec=3750 True Az=112.995 Ze=-128.085 Az status=0008 Ze status=0009 08:14:12 Check angles 08:14:12 SkyScan query 08:14:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.04<-21936 Statuses=0008 0009 08:14:12 Msec=4500 True Az=112.995 Ze=-149.04 Az status=0008 Ze status=0009 [UTC 2019-3-4 08:14:12] 08:14:12 Check angles 08:14:13 SkyScan query 08:14:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0008 0009 08:14:13 Msec=5250 True Az=112.995 Ze=-171.465 Az status=0008 Ze status=0009 08:14:13 Check angles 08:14:13 SkyScan query 08:14:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:14:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:14:14 Message to Master queued w/err=0: serial=99609 error=0 08:14:19 Received message from Master: op=Filter serial=99610 08:14:19 Color wheel filter change from 0 to 0 08:14:19 FLIGetFilterPos err=0 currentPosition=0 08:14:19 FLIGetStepsRemaining err=0 RemainingSteps=0 08:14:19 Filter is already there-color wheel unchanged 08:14:19 Received message from Master: op=Shutter serial=99611 08:14:19 Shutter LASER open 08:14:19 Received message from Camera: op=State serial=99613 08:14:19 GetSingleValue result=40 Value=cccccccc 08:14:19 SkyScan query 08:14:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:14:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:20 Parameters OK 08:14:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:20 Set A/D data flow result=40 08:14:20 Set A/D channel type result=40 08:14:20 Set A/D encoding result=40 08:14:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:20 Set channel filter=0.000000e+000 result=40 08:14:20 Config A/D Result=40 08:14:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:20 Get A/D filter: -9.255963e+061 result=40 08:14:20 Get A/D value=-858993460 result=40 08:14:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:20 Parameters OK 08:14:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:20 Set A/D data flow result=40 08:14:20 Set A/D channel type result=40 08:14:20 Set A/D encoding result=40 08:14:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:20 Set channel filter=0.000000e+000 result=40 08:14:20 Config A/D Result=40 08:14:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:20 Get A/D filter: -9.255963e+061 result=40 08:14:20 Get A/D value=-858993460 result=40 08:14:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:14:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:14:20 Aux= 08:14:20 Message to Camera, serial 99613 queued 08:14:28 Received message from Master: op=Shutter serial=99623 08:14:28 Shutter LASER close 08:14:29 Received message from Master: op=PointingHead serial=99627 08:14:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:14:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:14:29 Point started: ret=0 08:14:29 point_skyscan result=0 08:14:30 Check angles 08:14:30 SkyScan query 08:14:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.68<-21512 Statuses=0008 0009 08:14:30 Msec=0 True Az=112.995 Ze=-142.68 Az status=0008 Ze status=0009 08:14:31 Check angles 08:14:31 SkyScan query 08:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.29<-20086 Statuses=0008 0009 08:14:31 Msec=750 True Az=112.995 Ze=-121.29 Az status=0008 Ze status=0009 08:14:31 Check angles 08:14:31 SkyScan query 08:14:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.335<-18689 Statuses=0008 0009 08:14:32 Msec=1500 True Az=112.995 Ze=-100.335 Az status=0008 Ze status=0009 08:14:32 Check angles 08:14:32 SkyScan query 08:14:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.365<-17291 Statuses=0008 0009 08:14:33 Msec=2250 True Az=112.995 Ze=-79.365 Az status=0008 Ze status=0009 08:14:33 Check angles 08:14:33 SkyScan query 08:14:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.41<-15894 Statuses=0008 0009 08:14:33 Msec=3000 True Az=112.995 Ze=-58.41 Az status=0008 Ze status=0009 08:14:34 Check angles 08:14:34 SkyScan query 08:14:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.485<-14499 Statuses=0008 0009 08:14:34 Msec=3750 True Az=112.995 Ze=-37.485 Az status=0008 Ze status=0009 08:14:34 Check angles 08:14:34 SkyScan query 08:14:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.08<-13072 Statuses=0008 0009 08:14:35 Msec=4500 True Az=112.995 Ze=-16.08 Az status=0008 Ze status=0009 08:14:35 Check angles 08:14:35 SkyScan query 08:14:36 SkyScan query done: ret=0 az=112.995<-7533 ze=4.68<-11688 Statuses=0008 0009 08:14:36 Msec=5250 True Az=112.995 Ze=4.68 Az status=0008 Ze status=0009 08:14:36 Check angles 08:14:36 SkyScan query 08:14:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:14:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:14:36 Message to Master queued w/err=0: serial=99627 error=0 08:14:41 Received message from Master: op=Filter serial=99628 08:14:41 Color wheel filter change from 0 to 0 08:14:41 FLIGetFilterPos err=0 currentPosition=0 08:14:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:14:41 Filter is already there-color wheel unchanged 08:14:42 Received message from Master: op=Shutter serial=99629 08:14:42 Shutter LASER close 08:14:42 Received message from Camera: op=State serial=99631 08:14:42 GetSingleValue result=40 Value=cccccccc 08:14:42 SkyScan query 08:14:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:14:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:42 Parameters OK 08:14:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:42 Set A/D data flow result=40 08:14:42 Set A/D channel type result=40 08:14:42 Set A/D encoding result=40 08:14:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:42 Set channel filter=0.000000e+000 result=40 08:14:42 Config A/D Result=40 08:14:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:42 Get A/D filter: -9.255963e+061 result=40 08:14:42 Get A/D value=-858993460 result=40 08:14:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:42 Parameters OK 08:14:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:42 Set A/D data flow result=40 08:14:42 Set A/D channel type result=40 08:14:42 Set A/D encoding result=40 08:14:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:42 Set channel filter=0.000000e+000 result=40 08:14:42 Config A/D Result=40 08:14:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:42 Get A/D filter: -9.255963e+061 result=40 08:14:42 Get A/D value=-858993460 result=40 08:14:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:14:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:14:42 Aux= 08:14:42 Message to Camera, serial 99631 queued 08:15:19 Received message from Master: op=PointingHead serial=99644 08:15:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:15:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:15:20 Point started: ret=0 08:15:20 point_skyscan result=0 08:15:20 Check angles 08:15:20 SkyScan query 08:15:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:15:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:15:21 Message to Master queued w/err=0: serial=99644 error=0 08:15:26 Received message from Master: op=Filter serial=99645 08:15:26 Color wheel filter change from 0 to 0 08:15:26 FLIGetFilterPos err=0 currentPosition=0 08:15:26 FLIGetStepsRemaining err=0 RemainingSteps=0 08:15:26 Filter is already there-color wheel unchanged 08:15:26 Received message from Master: op=Shutter serial=99646 08:15:26 Shutter LASER close 08:15:26 Received message from Camera: op=State serial=99648 08:15:26 GetSingleValue result=40 Value=cccccccc 08:15:26 SkyScan query 08:15:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:15:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:27 Parameters OK 08:15:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:27 Set A/D data flow result=40 08:15:27 Set A/D channel type result=40 08:15:27 Set A/D encoding result=40 08:15:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:27 Set channel filter=0.000000e+000 result=40 08:15:27 Config A/D Result=40 08:15:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:27 Get A/D filter: -9.255963e+061 result=40 08:15:27 Get A/D value=-858993460 result=40 08:15:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:27 Parameters OK 08:15:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:27 Set A/D data flow result=40 08:15:27 Set A/D channel type result=40 08:15:27 Set A/D encoding result=40 08:15:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:27 Set channel filter=0.000000e+000 result=40 08:15:27 Config A/D Result=40 08:15:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:27 Get A/D filter: -9.255963e+061 result=40 08:15:27 Get A/D value=-858993460 result=40 08:15:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:15:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:15:27 Aux= 08:15:27 Message to Camera, serial 99648 queued 08:16:04 Received message from Master: op=PointingHead serial=99661 08:16:04 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:16:04 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:16:04 Point started: ret=0 08:16:04 point_skyscan result=0 08:16:05 Check angles 08:16:05 SkyScan query 08:16:05 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 08:16:05 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 08:16:05 Check angles 08:16:05 SkyScan query 08:16:06 SkyScan query done: ret=0 az=153.915<-10261 ze=-6.51<-12434 Statuses=0009 0008 08:16:06 Msec=750 True Az=153.915 Ze=-6.51 Az status=0009 Ze status=0008 08:16:06 Check angles 08:16:06 SkyScan query 08:16:07 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 08:16:07 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 08:16:07 Check angles 08:16:07 SkyScan query 08:16:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:16:08 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:16:08 Message to Master queued w/err=0: serial=99661 error=0 08:16:13 Received message from Master: op=Filter serial=99662 08:16:13 Color wheel filter change from 0 to 0 08:16:13 FLIGetFilterPos err=0 currentPosition=0 08:16:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:16:13 Filter is already there-color wheel unchanged 08:16:13 Received message from Master: op=Shutter serial=99663 08:16:13 Shutter LASER close 08:16:13 Received message from Camera: op=State serial=99665 08:16:13 GetSingleValue result=40 Value=cccccccc 08:16:13 SkyScan query 08:16:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:16:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:13 Parameters OK 08:16:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:13 Set A/D data flow result=40 08:16:13 Set A/D channel type result=40 08:16:13 Set A/D encoding result=40 08:16:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:13 Set channel filter=0.000000e+000 result=40 08:16:13 Config A/D Result=40 08:16:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:13 Get A/D filter: -9.255963e+061 result=40 08:16:13 Get A/D value=-858993460 result=40 08:16:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:13 Parameters OK 08:16:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:13 Set A/D data flow result=40 08:16:13 Set A/D channel type result=40 08:16:13 Set A/D encoding result=40 08:16:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:13 Set channel filter=0.000000e+000 result=40 08:16:13 Config A/D Result=40 08:16:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:13 Get A/D filter: -9.255963e+061 result=40 08:16:13 Get A/D value=-858993460 result=40 08:16:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:16:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:16:13 Aux= 08:16:13 Message to Camera, serial 99665 queued 08:16:50 Received message from Master: op=PointingHead serial=99678 08:16:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:16:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:16:51 Point started: ret=0 08:16:51 point_skyscan result=0 08:16:51 Check angles 08:16:51 SkyScan query 08:16:52 SkyScan query done: ret=0 az=153.225<-10215 ze=6.51<-11566 Statuses=0009 0008 08:16:52 Msec=0 True Az=153.225 Ze=6.51 Az status=0009 Ze status=0008 08:16:52 Check angles 08:16:52 SkyScan query 08:16:53 SkyScan query done: ret=0 az=135.705<-9047 ze=6.495<-11567 Statuses=0009 0008 08:16:53 Msec=750 True Az=135.705 Ze=6.495 Az status=0009 Ze status=0008 08:16:53 Check angles 08:16:53 SkyScan query 08:16:53 SkyScan query done: ret=0 az=117.75<-7850 ze=6.495<-11567 Statuses=0009 0008 08:16:53 Msec=1500 True Az=117.75 Ze=6.495 Az status=0009 Ze status=0008 08:16:54 Check angles 08:16:54 SkyScan query 08:16:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:16:54 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:16:54 Message to Master queued w/err=0: serial=99678 error=0 08:16:59 Received message from Master: op=Filter serial=99679 08:16:59 Color wheel filter change from 0 to 0 08:16:59 FLIGetFilterPos err=0 currentPosition=0 08:16:59 FLIGetStepsRemaining err=0 RemainingSteps=0 08:16:59 Filter is already there-color wheel unchanged 08:16:59 Received message from Master: op=Shutter serial=99680 08:16:59 Shutter LASER close 08:16:59 Received message from Camera: op=State serial=99682 08:16:59 GetSingleValue result=40 Value=cccccccc 08:16:59 SkyScan query 08:17:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:17:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:00 Parameters OK 08:17:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:00 Set A/D data flow result=40 08:17:00 Set A/D channel type result=40 08:17:00 Set A/D encoding result=40 08:17:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:00 Set channel filter=0.000000e+000 result=40 08:17:00 Config A/D Result=40 08:17:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:00 Get A/D filter: -9.255963e+061 result=40 08:17:00 Get A/D value=-858993460 result=40 08:17:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:00 Parameters OK 08:17:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:00 Set A/D data flow result=40 08:17:00 Set A/D channel type result=40 08:17:00 Set A/D encoding result=40 08:17:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:00 Set channel filter=0.000000e+000 result=40 08:17:00 Config A/D Result=40 08:17:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:00 Get A/D filter: -9.255963e+061 result=40 08:17:00 Get A/D value=-858993460 result=40 08:17:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:00 Aux= 08:17:00 Message to Camera, serial 99682 queued 08:17:37 Received message from Master: op=PointingHead serial=99695 08:17:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:17:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:17:37 Point started: ret=0 08:17:37 point_skyscan result=0 08:17:38 Check angles 08:17:38 SkyScan query 08:17:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.22<-13548 Statuses=0008 0009 08:17:38 Msec=0 True Az=112.995 Ze=-23.22 Az status=0008 Ze status=0009 08:17:39 Check angles 08:17:39 SkyScan query 08:17:39 SkyScan query done: ret=0 az=112.98<-7532 ze=-44.235<-14949 Statuses=0008 0009 08:17:39 Msec=750 True Az=112.98 Ze=-44.235 Az status=0008 Ze status=0009 08:17:39 Check angles 08:17:39 SkyScan query 08:17:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.145<-16343 Statuses=0008 0009 08:17:40 Msec=1500 True Az=112.995 Ze=-65.145 Az status=0008 Ze status=0009 08:17:40 Check angles 08:17:40 SkyScan query 08:17:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.205<-17747 Statuses=0008 0009 08:17:41 Msec=2250 True Az=112.995 Ze=-86.205 Az status=0008 Ze status=0009 08:17:41 Check angles 08:17:41 SkyScan query 08:17:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.025<-19135 Statuses=0008 0009 08:17:41 Msec=3000 True Az=112.995 Ze=-107.025 Az status=0008 Ze status=0009 08:17:42 Check angles 08:17:42 SkyScan query 08:17:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.98<-20532 Statuses=0008 0009 08:17:42 Msec=3750 True Az=112.995 Ze=-127.98 Az status=0008 Ze status=0009 08:17:42 Check angles 08:17:42 SkyScan query 08:17:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.92<-21928 Statuses=0008 0009 08:17:43 Msec=4500 True Az=112.995 Ze=-148.92 Az status=0008 Ze status=0009 08:17:43 Check angles 08:17:43 SkyScan query 08:17:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.86<-23324 Statuses=0008 0009 08:17:44 Msec=5250 True Az=112.995 Ze=-169.86 Az status=0008 Ze status=0009 08:17:44 Check angles 08:17:44 SkyScan query 08:17:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:17:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:17:44 Message to Master queued w/err=0: serial=99695 error=0 08:17:49 Received message from Master: op=Filter serial=99696 08:17:49 Color wheel filter change from 0 to 0 08:17:49 FLIGetFilterPos err=0 currentPosition=0 08:17:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:17:49 Filter is already there-color wheel unchanged 08:17:50 Received message from Master: op=Shutter serial=99697 08:17:50 Shutter LASER open 08:17:50 Received message from Camera: op=State serial=99699 08:17:50 GetSingleValue result=40 Value=cccccccc 08:17:50 SkyScan query 08:17:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:17:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:50 Parameters OK 08:17:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:50 Set A/D data flow result=40 08:17:50 Set A/D channel type result=40 08:17:50 Set A/D encoding result=40 08:17:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:50 Set channel filter=0.000000e+000 result=40 08:17:50 Config A/D Result=40 08:17:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:50 Get A/D filter: -9.255963e+061 result=40 08:17:50 Get A/D value=-858993460 result=40 08:17:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:50 Parameters OK 08:17:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:50 Set A/D data flow result=40 08:17:50 Set A/D channel type result=40 08:17:50 Set A/D encoding result=40 08:17:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:50 Set channel filter=0.000000e+000 result=40 08:17:50 Config A/D Result=40 08:17:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:50 Get A/D filter: -9.255963e+061 result=40 08:17:50 Get A/D value=-858993460 result=40 08:17:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:50 Aux= 08:17:50 Message to Camera, serial 99699 queued 08:17:59 Received message from Master: op=Shutter serial=99709 08:17:59 Shutter LASER close 08:17:59 Received message from Master: op=PointingHead serial=99713 08:17:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:17:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:18:00 Point started: ret=0 08:18:00 point_skyscan result=0 08:18:00 Check angles 08:18:00 SkyScan query 08:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 08:18:01 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 08:18:01 Check angles 08:18:01 SkyScan query 08:18:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.535<-20169 Statuses=0008 0009 08:18:02 Msec=750 True Az=112.995 Ze=-122.535 Az status=0008 Ze status=0009 08:18:02 Check angles 08:18:02 SkyScan query 08:18:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.55<-18770 Statuses=0008 0009 08:18:02 Msec=1500 True Az=112.995 Ze=-101.55 Az status=0008 Ze status=0009 08:18:03 Check angles 08:18:03 SkyScan query 08:18:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.595<-17373 Statuses=0008 0009 08:18:03 Msec=2250 True Az=112.995 Ze=-80.595 Az status=0008 Ze status=0009 08:18:03 Check angles 08:18:03 SkyScan query 08:18:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.655<-15977 Statuses=0008 0009 08:18:04 Msec=3000 True Az=112.995 Ze=-59.655 Az status=0008 Ze status=0009 08:18:04 Check angles 08:18:04 SkyScan query 08:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.7<-14580 Statuses=0008 0009 08:18:05 Msec=3750 True Az=112.995 Ze=-38.7 Az status=0008 Ze status=0009 08:18:05 Check angles 08:18:05 SkyScan query 08:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.73<-13182 Statuses=0008 0009 08:18:05 Msec=4500 True Az=112.995 Ze=-17.73 Az status=0008 Ze status=0009 08:18:06 Check angles 08:18:06 SkyScan query 08:18:06 SkyScan query done: ret=0 az=112.98<-7532 ze=3.21<-11786 Statuses=0008 0009 08:18:06 Msec=5250 True Az=112.98 Ze=3.21 Az status=0008 Ze status=0009 08:18:06 Check angles 08:18:06 SkyScan query 08:18:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:18:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:18:07 Message to Master queued w/err=0: serial=99713 error=0 08:18:12 Received message from Master: op=Filter serial=99714 08:18:12 Color wheel filter change from 0 to 0 08:18:12 FLIGetFilterPos err=0 currentPosition=0 08:18:12 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:12 Filter is already there-color wheel unchanged 08:18:12 Received message from Master: op=Shutter serial=99715 08:18:12 Shutter LASER close 08:18:12 Received message from Camera: op=State serial=99717 08:18:12 GetSingleValue result=40 Value=cccccccc 08:18:12 SkyScan query 08:18:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:18:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:13 Parameters OK 08:18:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:13 Set A/D data flow result=40 08:18:13 Set A/D channel type result=40 08:18:13 Set A/D encoding result=40 08:18:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:13 Set channel filter=0.000000e+000 result=40 08:18:13 Config A/D Result=40 08:18:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:13 Get A/D filter: -9.255963e+061 result=40 08:18:13 Get A/D value=-858993460 result=40 08:18:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:13 Parameters OK 08:18:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:13 Set A/D data flow result=40 08:18:13 Set A/D channel type result=40 08:18:13 Set A/D encoding result=40 08:18:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:13 Set channel filter=0.000000e+000 result=40 08:18:13 Config A/D Result=40 08:18:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:13 Get A/D filter: -9.255963e+061 result=40 08:18:13 Get A/D value=-858993460 result=40 08:18:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:13 Aux= 08:18:13 Message to Camera, serial 99717 queued 08:18:50 Received message from Master: op=PointingHead serial=99730 08:18:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:18:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:18:50 Point started: ret=0 08:18:50 point_skyscan result=0 08:18:51 Check angles 08:18:51 SkyScan query 08:18:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:18:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:18:51 Message to Master queued w/err=0: serial=99730 error=0 08:18:56 Received message from Master: op=Filter serial=99731 08:18:56 Color wheel filter change from 0 to 0 08:18:56 FLIGetFilterPos err=0 currentPosition=0 08:18:56 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:56 Filter is already there-color wheel unchanged 08:18:56 Received message from Master: op=Shutter serial=99732 08:18:56 Shutter LASER close 08:18:57 Received message from Camera: op=State serial=99734 08:18:57 GetSingleValue result=40 Value=cccccccc 08:18:57 SkyScan query 08:18:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:18:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:57 Parameters OK 08:18:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:57 Set A/D data flow result=40 08:18:57 Set A/D channel type result=40 08:18:57 Set A/D encoding result=40 08:18:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:57 Set channel filter=0.000000e+000 result=40 08:18:57 Config A/D Result=40 08:18:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:57 Get A/D filter: -9.255963e+061 result=40 08:18:57 Get A/D value=-858993460 result=40 08:18:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:57 Parameters OK 08:18:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:57 Set A/D data flow result=40 08:18:57 Set A/D channel type result=40 08:18:57 Set A/D encoding result=40 08:18:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:57 Set channel filter=0.000000e+000 result=40 08:18:57 Config A/D Result=40 08:18:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:57 Get A/D filter: -9.255963e+061 result=40 08:18:57 Get A/D value=-858993460 result=40 08:18:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:57 Aux= 08:18:57 Message to Camera, serial 99734 queued 08:19:34 Received message from Master: op=PointingHead serial=99747 08:19:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:19:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:19:34 Point started: ret=0 08:19:34 point_skyscan result=0 08:19:35 Check angles 08:19:35 SkyScan query 08:19:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:19:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:19:36 Message to Master queued w/err=0: serial=99747 error=0 08:19:41 Received message from Master: op=Filter serial=99748 08:19:41 Color wheel filter change from 0 to 0 08:19:41 FLIGetFilterPos err=0 currentPosition=0 08:19:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:19:41 Filter is already there-color wheel unchanged 08:19:41 Received message from Master: op=Shutter serial=99749 08:19:41 Shutter LASER close 08:19:41 Received message from Camera: op=State serial=99751 08:19:41 GetSingleValue result=40 Value=cccccccc 08:19:41 SkyScan query 08:19:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:19:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:41 Parameters OK 08:19:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:41 Set A/D data flow result=40 08:19:41 Set A/D channel type result=40 08:19:41 Set A/D encoding result=40 08:19:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:41 Set channel filter=0.000000e+000 result=40 08:19:41 Config A/D Result=40 08:19:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:41 Get A/D filter: -9.255963e+061 result=40 08:19:41 Get A/D value=-858993460 result=40 08:19:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:41 Parameters OK 08:19:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:41 Set A/D data flow result=40 08:19:41 Set A/D channel type result=40 08:19:41 Set A/D encoding result=40 08:19:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:41 Set channel filter=0.000000e+000 result=40 08:19:41 Config A/D Result=40 08:19:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:41 Get A/D filter: -9.255963e+061 result=40 08:19:41 Get A/D value=-858993460 result=40 08:19:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:19:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:19:41 Aux= 08:19:41 Message to Camera, serial 99751 queued 08:20:18 Received message from Master: op=PointingHead serial=99764 08:20:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:20:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:20:19 Point started: ret=0 08:20:19 point_skyscan result=0 08:20:19 Check angles 08:20:19 SkyScan query 08:20:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:20:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:20:20 Message to Master queued w/err=0: serial=99764 error=0 08:20:25 Received message from Master: op=Filter serial=99765 08:20:25 Color wheel filter change from 0 to 0 08:20:25 FLIGetFilterPos err=0 currentPosition=0 08:20:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:20:25 Filter is already there-color wheel unchanged 08:20:25 Received message from Master: op=Shutter serial=99766 08:20:25 Shutter LASER close 08:20:25 Received message from Camera: op=State serial=99768 08:20:25 GetSingleValue result=40 Value=cccccccc 08:20:25 SkyScan query 08:20:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:20:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:26 Parameters OK 08:20:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:26 Set A/D data flow result=40 08:20:26 Set A/D channel type result=40 08:20:26 Set A/D encoding result=40 08:20:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:26 Set channel filter=0.000000e+000 result=40 08:20:26 Config A/D Result=40 08:20:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:26 Get A/D filter: -9.255963e+061 result=40 08:20:26 Get A/D value=-858993460 result=40 08:20:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:26 Parameters OK 08:20:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:26 Set A/D data flow result=40 08:20:26 Set A/D channel type result=40 08:20:26 Set A/D encoding result=40 08:20:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:26 Set channel filter=0.000000e+000 result=40 08:20:26 Config A/D Result=40 08:20:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:26 Get A/D filter: -9.255963e+061 result=40 08:20:26 Get A/D value=-858993460 result=40 08:20:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:20:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:20:26 Aux= 08:20:26 Message to Camera, serial 99768 queued 08:21:03 Received message from Master: op=PointingHead serial=99781 08:21:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:21:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:21:03 Point started: ret=0 08:21:03 point_skyscan result=0 08:21:04 Check angles 08:21:04 SkyScan query 08:21:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.85<-13590 Statuses=0008 0009 08:21:04 Msec=0 True Az=112.995 Ze=-23.85 Az status=0008 Ze status=0009 08:21:05 Check angles 08:21:05 SkyScan query 08:21:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.775<-14985 Statuses=0008 0009 08:21:05 Msec=750 True Az=112.995 Ze=-44.775 Az status=0008 Ze status=0009 08:21:05 Check angles 08:21:05 SkyScan query 08:21:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.18<-16412 Statuses=0008 0009 08:21:06 Msec=1500 True Az=112.995 Ze=-66.18 Az status=0008 Ze status=0009 08:21:06 Check angles 08:21:06 SkyScan query 08:21:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.15<-17810 Statuses=0008 0009 08:21:07 Msec=2250 True Az=112.995 Ze=-87.15 Az status=0008 Ze status=0009 08:21:07 Check angles 08:21:07 SkyScan query 08:21:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.105<-19207 Statuses=0008 0009 08:21:07 Msec=3000 True Az=112.995 Ze=-108.105 Az status=0008 Ze status=0009 08:21:08 Check angles 08:21:08 SkyScan query 08:21:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.51<-20634 Statuses=0008 0009 08:21:08 Msec=3750 True Az=112.995 Ze=-129.51 Az status=0008 Ze status=0009 08:21:08 Check angles 08:21:08 SkyScan query 08:21:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.45<-22030 Statuses=0008 0009 08:21:09 Msec=4500 True Az=112.995 Ze=-150.45 Az status=0008 Ze status=0009 08:21:09 Check angles 08:21:09 SkyScan query 08:21:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.21<-23414 Statuses=0008 0009 08:21:10 Msec=5250 True Az=112.995 Ze=-171.21 Az status=0008 Ze status=0009 08:21:10 Check angles 08:21:10 SkyScan query 08:21:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:21:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:21:10 Message to Master queued w/err=0: serial=99781 error=0 08:21:15 Received message from Master: op=Filter serial=99782 08:21:15 Color wheel filter change from 0 to 0 08:21:15 FLIGetFilterPos err=0 currentPosition=0 08:21:15 FLIGetStepsRemaining err=0 RemainingSteps=0 08:21:15 Filter is already there-color wheel unchanged 08:21:16 Received message from Master: op=Shutter serial=99783 08:21:16 Shutter LASER open 08:21:16 Received message from Camera: op=State serial=99785 08:21:16 GetSingleValue result=40 Value=cccccccc 08:21:16 SkyScan query 08:21:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:21:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:16 Parameters OK 08:21:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:16 Set A/D data flow result=40 08:21:16 Set A/D channel type result=40 08:21:16 Set A/D encoding result=40 08:21:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:16 Set channel filter=0.000000e+000 result=40 08:21:16 Config A/D Result=40 08:21:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:16 Get A/D filter: -9.255963e+061 result=40 08:21:16 Get A/D value=-858993460 result=40 08:21:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:16 Parameters OK 08:21:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:16 Set A/D data flow result=40 08:21:16 Set A/D channel type result=40 08:21:16 Set A/D encoding result=40 08:21:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:16 Set channel filter=0.000000e+000 result=40 08:21:16 Config A/D Result=40 08:21:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:16 Get A/D filter: -9.255963e+061 result=40 08:21:16 Get A/D value=-858993460 result=40 08:21:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:21:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:21:16 Aux= 08:21:16 Message to Camera, serial 99785 queued 08:21:25 Received message from Master: op=Shutter serial=99795 08:21:25 Shutter LASER close 08:21:25 Received message from Master: op=PointingHead serial=99799 08:21:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:21:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:21:26 Point started: ret=0 08:21:26 point_skyscan result=0 08:21:26 Check angles 08:21:26 SkyScan query 08:21:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 08:21:27 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 08:21:27 Check angles 08:21:27 SkyScan query 08:21:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.475<-20165 Statuses=0008 0009 08:21:28 Msec=750 True Az=112.995 Ze=-122.475 Az status=0008 Ze status=0009 08:21:28 Check angles 08:21:28 SkyScan query 08:21:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.49<-18766 Statuses=0008 0009 08:21:28 Msec=1500 True Az=112.995 Ze=-101.49 Az status=0008 Ze status=0009 08:21:29 Check angles 08:21:29 SkyScan query 08:21:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.52<-17368 Statuses=0008 0009 08:21:29 Msec=2250 True Az=112.995 Ze=-80.52 Az status=0008 Ze status=0009 08:21:29 Check angles 08:21:29 SkyScan query 08:21:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 08:21:30 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 08:21:30 Check angles 08:21:30 SkyScan query 08:21:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.145<-14543 Statuses=0008 0009 08:21:31 Msec=3750 True Az=112.995 Ze=-38.145 Az status=0008 Ze status=0009 08:21:31 Check angles 08:21:31 SkyScan query 08:21:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.22<-13148 Statuses=0008 0009 08:21:31 Msec=4500 True Az=112.995 Ze=-17.22 Az status=0008 Ze status=0009 08:21:32 Check angles 08:21:32 SkyScan query 08:21:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.155<-11723 Statuses=0008 0009 08:21:32 Msec=5250 True Az=112.995 Ze=4.155 Az status=0008 Ze status=0009 08:21:32 Check angles 08:21:32 SkyScan query 08:21:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:21:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:21:33 Message to Master queued w/err=0: serial=99799 error=0 08:21:38 Received message from Master: op=Filter serial=99800 08:21:38 Color wheel filter change from 0 to 0 08:21:38 FLIGetFilterPos err=0 currentPosition=0 08:21:38 FLIGetStepsRemaining err=0 RemainingSteps=0 08:21:38 Filter is already there-color wheel unchanged 08:21:38 Received message from Master: op=Shutter serial=99801 08:21:38 Shutter LASER close 08:21:38 Received message from Camera: op=State serial=99803 08:21:38 GetSingleValue result=40 Value=cccccccc 08:21:38 SkyScan query 08:21:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:21:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:39 Parameters OK 08:21:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:39 Set A/D data flow result=40 08:21:39 Set A/D channel type result=40 08:21:39 Set A/D encoding result=40 08:21:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:39 Set channel filter=0.000000e+000 result=40 08:21:39 Config A/D Result=40 08:21:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:39 Get A/D filter: -9.255963e+061 result=40 08:21:39 Get A/D value=-858993460 result=40 08:21:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:39 Parameters OK 08:21:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:39 Set A/D data flow result=40 08:21:39 Set A/D channel type result=40 08:21:39 Set A/D encoding result=40 08:21:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:39 Set channel filter=0.000000e+000 result=40 08:21:39 Config A/D Result=40 08:21:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:39 Get A/D filter: -9.255963e+061 result=40 08:21:39 Get A/D value=-858993460 result=40 08:21:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:21:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:21:39 Aux= 08:21:39 Message to Camera, serial 99803 queued 08:22:16 Received message from Master: op=PointingHead serial=99816 08:22:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:22:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:22:16 Point started: ret=0 08:22:16 point_skyscan result=0 08:22:17 Check angles 08:22:17 SkyScan query 08:22:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:22:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:22:17 Message to Master queued w/err=0: serial=99816 error=0 08:22:22 Received message from Master: op=Filter serial=99817 08:22:22 Color wheel filter change from 0 to 0 08:22:22 FLIGetFilterPos err=0 currentPosition=0 08:22:22 FLIGetStepsRemaining err=0 RemainingSteps=0 08:22:22 Filter is already there-color wheel unchanged 08:22:23 Received message from Master: op=Shutter serial=99818 08:22:23 Shutter LASER close 08:22:23 Received message from Camera: op=State serial=99820 08:22:23 GetSingleValue result=40 Value=cccccccc 08:22:23 SkyScan query 08:22:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:22:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:23 Parameters OK 08:22:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:23 Set A/D data flow result=40 08:22:23 Set A/D channel type result=40 08:22:23 Set A/D encoding result=40 08:22:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:23 Set channel filter=0.000000e+000 result=40 08:22:23 Config A/D Result=40 08:22:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:23 Get A/D filter: -9.255963e+061 result=40 08:22:23 Get A/D value=-858993460 result=40 08:22:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:23 Parameters OK 08:22:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:23 Set A/D data flow result=40 08:22:23 Set A/D channel type result=40 08:22:23 Set A/D encoding result=40 08:22:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:23 Set channel filter=0.000000e+000 result=40 08:22:23 Config A/D Result=40 08:22:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:23 Get A/D filter: -9.255963e+061 result=40 08:22:23 Get A/D value=-858993460 result=40 08:22:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:22:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:22:23 Aux= 08:22:23 Message to Camera, serial 99820 queued 08:23:00 Received message from Master: op=PointingHead serial=99833 08:23:00 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:23:00 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:23:00 Point started: ret=0 08:23:00 point_skyscan result=0 08:23:01 Check angles 08:23:01 SkyScan query 08:23:02 SkyScan query done: ret=0 az=136.17<-9078 ze=-6.51<-12434 Statuses=0009 0008 08:23:02 Msec=0 True Az=136.17 Ze=-6.51 Az status=0009 Ze status=0008 08:23:02 Check angles 08:23:02 SkyScan query 08:23:02 SkyScan query done: ret=0 az=153.99<-10266 ze=-6.51<-12434 Statuses=0009 0008 08:23:02 Msec=750 True Az=153.99 Ze=-6.51 Az status=0009 Ze status=0008 08:23:03 Check angles 08:23:03 SkyScan query 08:23:03 SkyScan query done: ret=0 az=171.57<-11438 ze=-6.495<-12433 Statuses=0009 0008 08:23:03 Msec=1500 True Az=171.57 Ze=-6.495 Az status=0009 Ze status=0008 08:23:03 Check angles 08:23:03 SkyScan query 08:23:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:23:04 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:23:04 Message to Master queued w/err=0: serial=99833 error=0 08:23:09 Received message from Master: op=Filter serial=99834 08:23:09 Color wheel filter change from 0 to 0 08:23:09 FLIGetFilterPos err=0 currentPosition=0 08:23:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:23:09 Filter is already there-color wheel unchanged 08:23:09 Received message from Master: op=Shutter serial=99835 08:23:09 Shutter LASER close 08:23:09 Received message from Camera: op=State serial=99837 08:23:09 GetSingleValue result=40 Value=cccccccc 08:23:09 SkyScan query 08:23:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:23:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:10 Parameters OK 08:23:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:10 Set A/D data flow result=40 08:23:10 Set A/D channel type result=40 08:23:10 Set A/D encoding result=40 08:23:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:10 Set channel filter=0.000000e+000 result=40 08:23:10 Config A/D Result=40 08:23:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:10 Get A/D filter: -9.255963e+061 result=40 08:23:10 Get A/D value=-858993460 result=40 08:23:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:10 Parameters OK 08:23:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:10 Set A/D data flow result=40 08:23:10 Set A/D channel type result=40 08:23:10 Set A/D encoding result=40 08:23:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:10 Set channel filter=0.000000e+000 result=40 08:23:10 Config A/D Result=40 08:23:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:10 Get A/D filter: -9.255963e+061 result=40 08:23:10 Get A/D value=-858993460 result=40 08:23:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:23:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:23:10 Aux= 08:23:10 Message to Camera, serial 99837 queued 08:23:47 Received message from Master: op=PointingHead serial=99850 08:23:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:23:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:23:47 Point started: ret=0 08:23:47 point_skyscan result=0 08:23:48 Check angles 08:23:48 SkyScan query 08:23:48 SkyScan query done: ret=0 az=153.135<-10209 ze=6.51<-11566 Statuses=0009 0008 08:23:48 Msec=0 True Az=153.135 Ze=6.51 Az status=0009 Ze status=0008 08:23:48 Check angles 08:23:48 SkyScan query 08:23:49 SkyScan query done: ret=0 az=135.63<-9042 ze=6.495<-11567 Statuses=0009 0008 08:23:49 Msec=750 True Az=135.63 Ze=6.495 Az status=0009 Ze status=0008 08:23:49 Check angles 08:23:49 SkyScan query 08:23:50 SkyScan query done: ret=0 az=117.825<-7855 ze=6.495<-11567 Statuses=0009 0008 08:23:50 Msec=1500 True Az=117.825 Ze=6.495 Az status=0009 Ze status=0008 [UTC 2019-3-4 08:23:50] 08:23:50 Check angles 08:23:50 SkyScan query 08:23:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:23:51 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:23:51 Message to Master queued w/err=0: serial=99850 error=0 08:23:56 Received message from Master: op=Filter serial=99851 08:23:56 Color wheel filter change from 0 to 0 08:23:56 FLIGetFilterPos err=0 currentPosition=0 08:23:56 FLIGetStepsRemaining err=0 RemainingSteps=0 08:23:56 Filter is already there-color wheel unchanged 08:23:56 Received message from Master: op=Shutter serial=99852 08:23:56 Shutter LASER close 08:23:56 Received message from Camera: op=State serial=99854 08:23:56 GetSingleValue result=40 Value=cccccccc 08:23:56 SkyScan query 08:23:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:23:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:56 Parameters OK 08:23:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:56 Set A/D data flow result=40 08:23:56 Set A/D channel type result=40 08:23:56 Set A/D encoding result=40 08:23:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:56 Set channel filter=0.000000e+000 result=40 08:23:56 Config A/D Result=40 08:23:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:56 Get A/D filter: -9.255963e+061 result=40 08:23:56 Get A/D value=-858993460 result=40 08:23:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:56 Parameters OK 08:23:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:56 Set A/D data flow result=40 08:23:56 Set A/D channel type result=40 08:23:56 Set A/D encoding result=40 08:23:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:56 Set channel filter=0.000000e+000 result=40 08:23:56 Config A/D Result=40 08:23:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:56 Get A/D filter: -9.255963e+061 result=40 08:23:56 Get A/D value=-858993460 result=40 08:23:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:23:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:23:56 Aux= 08:23:56 Message to Camera, serial 99854 queued 08:24:33 Received message from Master: op=PointingHead serial=99867 08:24:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:24:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:24:34 Point started: ret=0 08:24:34 point_skyscan result=0 08:24:34 Check angles 08:24:34 SkyScan query 08:24:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 08:24:35 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 08:24:35 Check angles 08:24:35 SkyScan query 08:24:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 08:24:36 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 08:24:36 Check angles 08:24:36 SkyScan query 08:24:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 08:24:36 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 08:24:37 Check angles 08:24:37 SkyScan query 08:24:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.43<-17762 Statuses=0008 0009 08:24:37 Msec=2250 True Az=112.995 Ze=-86.43 Az status=0008 Ze status=0009 08:24:37 Check angles 08:24:37 SkyScan query 08:24:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 08:24:38 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 08:24:38 Check angles 08:24:38 SkyScan query 08:24:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.34<-20556 Statuses=0008 0009 08:24:39 Msec=3750 True Az=112.995 Ze=-128.34 Az status=0008 Ze status=0009 08:24:39 Check angles 08:24:39 SkyScan query 08:24:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.34<-21956 Statuses=0008 0009 08:24:39 Msec=4500 True Az=112.995 Ze=-149.34 Az status=0008 Ze status=0009 08:24:40 Check angles 08:24:40 SkyScan query 08:24:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.265<-23351 Statuses=0008 0009 08:24:40 Msec=5250 True Az=112.995 Ze=-170.265 Az status=0008 Ze status=0009 08:24:40 Check angles 08:24:40 SkyScan query 08:24:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:24:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:24:41 Message to Master queued w/err=0: serial=99867 error=0 08:24:46 Received message from Master: op=Filter serial=99868 08:24:46 Color wheel filter change from 0 to 0 08:24:46 FLIGetFilterPos err=0 currentPosition=0 08:24:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:24:46 Filter is already there-color wheel unchanged 08:24:46 Received message from Master: op=Shutter serial=99869 08:24:46 Shutter LASER open 08:24:46 Received message from Camera: op=State serial=99871 08:24:46 GetSingleValue result=40 Value=cccccccc 08:24:46 SkyScan query 08:24:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:24:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:47 Parameters OK 08:24:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:47 Set A/D data flow result=40 08:24:47 Set A/D channel type result=40 08:24:47 Set A/D encoding result=40 08:24:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:47 Set channel filter=0.000000e+000 result=40 08:24:47 Config A/D Result=40 08:24:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:47 Get A/D filter: -9.255963e+061 result=40 08:24:47 Get A/D value=-858993460 result=40 08:24:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:47 Parameters OK 08:24:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:47 Set A/D data flow result=40 08:24:47 Set A/D channel type result=40 08:24:47 Set A/D encoding result=40 08:24:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:47 Set channel filter=0.000000e+000 result=40 08:24:47 Config A/D Result=40 08:24:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:47 Get A/D filter: -9.255963e+061 result=40 08:24:47 Get A/D value=-858993460 result=40 08:24:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:24:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:24:47 Aux= 08:24:47 Message to Camera, serial 99871 queued 08:24:55 Received message from Master: op=Shutter serial=99881 08:24:55 Shutter LASER close 08:24:56 Received message from Master: op=PointingHead serial=99885 08:24:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:24:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:24:56 Point started: ret=0 08:24:56 point_skyscan result=0 08:24:57 Check angles 08:24:57 SkyScan query 08:24:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.8<-21520 Statuses=0008 0009 08:24:57 Msec=0 True Az=112.995 Ze=-142.8 Az status=0008 Ze status=0009 08:24:58 Check angles 08:24:58 SkyScan query 08:24:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.365<-20091 Statuses=0008 0009 08:24:58 Msec=750 True Az=112.995 Ze=-121.365 Az status=0008 Ze status=0009 08:24:58 Check angles 08:24:58 SkyScan query 08:24:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.425<-18695 Statuses=0008 0009 08:24:59 Msec=1500 True Az=112.995 Ze=-100.425 Az status=0008 Ze status=0009 08:24:59 Check angles 08:24:59 SkyScan query 08:25:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.065<-17271 Statuses=0008 0009 08:25:00 Msec=2250 True Az=112.995 Ze=-79.065 Az status=0008 Ze status=0009 08:25:00 Check angles 08:25:00 SkyScan query 08:25:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.69<-15846 Statuses=0008 0009 08:25:00 Msec=3000 True Az=112.995 Ze=-57.69 Az status=0008 Ze status=0009 08:25:01 Check angles 08:25:01 SkyScan query 08:25:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.255<-14417 Statuses=0008 0009 08:25:01 Msec=3750 True Az=112.995 Ze=-36.255 Az status=0008 Ze status=0009 08:25:01 Check angles 08:25:01 SkyScan query 08:25:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.285<-13019 Statuses=0008 0009 08:25:02 Msec=4500 True Az=112.995 Ze=-15.285 Az status=0008 Ze status=0009 08:25:02 Check angles 08:25:02 SkyScan query 08:25:03 SkyScan query done: ret=0 az=112.98<-7532 ze=5.235<-11651 Statuses=0008 0009 08:25:03 Msec=5250 True Az=112.98 Ze=5.235 Az status=0008 Ze status=0009 08:25:03 Check angles 08:25:03 SkyScan query 08:25:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:25:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:25:03 Message to Master queued w/err=0: serial=99885 error=0 08:25:08 Received message from Master: op=Filter serial=99886 08:25:08 Color wheel filter change from 0 to 0 08:25:08 FLIGetFilterPos err=0 currentPosition=0 08:25:08 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:08 Filter is already there-color wheel unchanged 08:25:09 Received message from Master: op=Shutter serial=99887 08:25:09 Shutter LASER close 08:25:09 Received message from Camera: op=State serial=99889 08:25:09 GetSingleValue result=40 Value=cccccccc 08:25:09 SkyScan query 08:25:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:25:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:09 Parameters OK 08:25:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:09 Set A/D data flow result=40 08:25:09 Set A/D channel type result=40 08:25:09 Set A/D encoding result=40 08:25:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:09 Set channel filter=0.000000e+000 result=40 08:25:09 Config A/D Result=40 08:25:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:09 Get A/D filter: -9.255963e+061 result=40 08:25:09 Get A/D value=-858993460 result=40 08:25:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:09 Parameters OK 08:25:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:09 Set A/D data flow result=40 08:25:09 Set A/D channel type result=40 08:25:09 Set A/D encoding result=40 08:25:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:09 Set channel filter=0.000000e+000 result=40 08:25:09 Config A/D Result=40 08:25:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:09 Get A/D filter: -9.255963e+061 result=40 08:25:09 Get A/D value=-858993460 result=40 08:25:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:09 Aux= 08:25:09 Message to Camera, serial 99889 queued 08:25:45 Received message from Master: op=PointingHead serial=99901 08:25:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:25:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:25:46 Point started: ret=0 08:25:46 point_skyscan result=0 08:25:46 Check angles 08:25:46 SkyScan query 08:25:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:25:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:25:47 Message to Master queued w/err=0: serial=99901 error=0 08:25:52 Received message from Master: op=Filter serial=99902 08:25:52 Color wheel filter change from 0 to 0 08:25:52 FLIGetFilterPos err=0 currentPosition=0 08:25:52 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:52 Filter is already there-color wheel unchanged 08:25:52 Received message from Master: op=Shutter serial=99903 08:25:52 Shutter LASER close 08:25:52 Received message from Camera: op=State serial=99905 08:25:52 GetSingleValue result=40 Value=cccccccc 08:25:52 SkyScan query 08:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:25:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:53 Parameters OK 08:25:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:53 Set A/D data flow result=40 08:25:53 Set A/D channel type result=40 08:25:53 Set A/D encoding result=40 08:25:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:53 Set channel filter=0.000000e+000 result=40 08:25:53 Config A/D Result=40 08:25:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:53 Get A/D filter: -9.255963e+061 result=40 08:25:53 Get A/D value=-858993460 result=40 08:25:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:53 Parameters OK 08:25:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:53 Set A/D data flow result=40 08:25:53 Set A/D channel type result=40 08:25:53 Set A/D encoding result=40 08:25:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:53 Set channel filter=0.000000e+000 result=40 08:25:53 Config A/D Result=40 08:25:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:53 Get A/D filter: -9.255963e+061 result=40 08:25:53 Get A/D value=-858993460 result=40 08:25:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:53 Aux= 08:25:53 Message to Camera, serial 99905 queued 08:26:30 Received message from Master: op=PointingHead serial=99918 08:26:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:26:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:26:30 Point started: ret=0 08:26:30 point_skyscan result=0 08:26:31 Check angles 08:26:31 SkyScan query 08:26:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:26:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:26:31 Message to Master queued w/err=0: serial=99918 error=0 08:26:36 Received message from Master: op=Filter serial=99919 08:26:36 Color wheel filter change from 0 to 0 08:26:36 FLIGetFilterPos err=0 currentPosition=0 08:26:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:26:36 Filter is already there-color wheel unchanged 08:26:36 Received message from Master: op=Shutter serial=99920 08:26:36 Shutter LASER close 08:26:36 Received message from Camera: op=State serial=99922 08:26:36 GetSingleValue result=40 Value=cccccccc 08:26:36 SkyScan query 08:26:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:26:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:37 Parameters OK 08:26:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:37 Set A/D data flow result=40 08:26:37 Set A/D channel type result=40 08:26:37 Set A/D encoding result=40 08:26:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:37 Set channel filter=0.000000e+000 result=40 08:26:37 Config A/D Result=40 08:26:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:37 Get A/D filter: -9.255963e+061 result=40 08:26:37 Get A/D value=-858993460 result=40 08:26:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:37 Parameters OK 08:26:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:37 Set A/D data flow result=40 08:26:37 Set A/D channel type result=40 08:26:37 Set A/D encoding result=40 08:26:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:37 Set channel filter=0.000000e+000 result=40 08:26:37 Config A/D Result=40 08:26:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:37 Get A/D filter: -9.255963e+061 result=40 08:26:37 Get A/D value=-858993460 result=40 08:26:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:26:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:26:37 Aux= 08:26:37 Message to Camera, serial 99922 queued 08:27:14 Received message from Master: op=PointingHead serial=99935 08:27:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:27:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:27:14 Point started: ret=0 08:27:14 point_skyscan result=0 08:27:15 Check angles 08:27:15 SkyScan query 08:27:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:27:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:27:16 Message to Master queued w/err=0: serial=99935 error=0 08:27:21 Received message from Master: op=Filter serial=99936 08:27:21 Color wheel filter change from 0 to 0 08:27:21 FLIGetFilterPos err=0 currentPosition=0 08:27:21 FLIGetStepsRemaining err=0 RemainingSteps=0 08:27:21 Filter is already there-color wheel unchanged 08:27:21 Received message from Master: op=Shutter serial=99937 08:27:21 Shutter LASER close 08:27:21 Received message from Camera: op=State serial=99939 08:27:21 GetSingleValue result=40 Value=cccccccc 08:27:21 SkyScan query 08:27:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:27:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:21 Parameters OK 08:27:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:21 Set A/D data flow result=40 08:27:21 Set A/D channel type result=40 08:27:21 Set A/D encoding result=40 08:27:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:21 Set channel filter=0.000000e+000 result=40 08:27:21 Config A/D Result=40 08:27:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:21 Get A/D filter: -9.255963e+061 result=40 08:27:21 Get A/D value=-858993460 result=40 08:27:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:21 Parameters OK 08:27:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:21 Set A/D data flow result=40 08:27:21 Set A/D channel type result=40 08:27:21 Set A/D encoding result=40 08:27:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:21 Set channel filter=0.000000e+000 result=40 08:27:21 Config A/D Result=40 08:27:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:21 Get A/D filter: -9.255963e+061 result=40 08:27:21 Get A/D value=-858993460 result=40 08:27:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:27:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:27:21 Aux= 08:27:21 Message to Camera, serial 99939 queued 08:27:58 Received message from Master: op=PointingHead serial=99952 08:27:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:27:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:27:58 Point started: ret=0 08:27:58 point_skyscan result=0 08:27:59 Check angles 08:27:59 SkyScan query 08:28:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.49<-13566 Statuses=0008 0009 08:28:00 Msec=0 True Az=112.995 Ze=-23.49 Az status=0008 Ze status=0009 08:28:00 Check angles 08:28:00 SkyScan query 08:28:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 08:28:01 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 08:28:01 Check angles 08:28:01 SkyScan query 08:28:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.4<-16360 Statuses=0008 0009 08:28:01 Msec=1500 True Az=112.995 Ze=-65.4 Az status=0008 Ze status=0009 08:28:01 Check angles 08:28:01 SkyScan query 08:28:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 08:28:02 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 08:28:02 Check angles 08:28:02 SkyScan query 08:28:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.295<-19153 Statuses=0008 0009 08:28:03 Msec=3000 True Az=112.995 Ze=-107.295 Az status=0008 Ze status=0009 08:28:03 Check angles 08:28:03 SkyScan query 08:28:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.22<-20548 Statuses=0008 0009 08:28:04 Msec=3750 True Az=112.995 Ze=-128.22 Az status=0008 Ze status=0009 08:28:04 Check angles 08:28:04 SkyScan query 08:28:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.19<-21946 Statuses=0008 0009 08:28:04 Msec=4500 True Az=112.995 Ze=-149.19 Az status=0008 Ze status=0009 08:28:04 Check angles 08:28:04 SkyScan query 08:28:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.13<-23342 Statuses=0008 0009 08:28:05 Msec=5250 True Az=112.995 Ze=-170.13 Az status=0008 Ze status=0009 08:28:05 Check angles 08:28:05 SkyScan query 08:28:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:28:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:28:06 Message to Master queued w/err=0: serial=99952 error=0 08:28:11 Received message from Master: op=Filter serial=99953 08:28:11 Color wheel filter change from 0 to 0 08:28:11 FLIGetFilterPos err=0 currentPosition=0 08:28:11 FLIGetStepsRemaining err=0 RemainingSteps=0 08:28:11 Filter is already there-color wheel unchanged 08:28:11 Received message from Master: op=Shutter serial=99954 08:28:11 Shutter LASER open 08:28:11 Received message from Camera: op=State serial=99956 08:28:11 GetSingleValue result=40 Value=cccccccc 08:28:11 SkyScan query 08:28:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:28:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:12 Parameters OK 08:28:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:12 Set A/D data flow result=40 08:28:12 Set A/D channel type result=40 08:28:12 Set A/D encoding result=40 08:28:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:12 Set channel filter=0.000000e+000 result=40 08:28:12 Config A/D Result=40 08:28:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:12 Get A/D filter: -9.255963e+061 result=40 08:28:12 Get A/D value=-858993460 result=40 08:28:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:12 Parameters OK 08:28:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:12 Set A/D data flow result=40 08:28:12 Set A/D channel type result=40 08:28:12 Set A/D encoding result=40 08:28:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:12 Set channel filter=0.000000e+000 result=40 08:28:12 Config A/D Result=40 08:28:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:12 Get A/D filter: -9.255963e+061 result=40 08:28:12 Get A/D value=-858993460 result=40 08:28:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:28:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:28:12 Aux= 08:28:12 Message to Camera, serial 99956 queued 08:28:20 Received message from Master: op=Shutter serial=99966 08:28:20 Shutter LASER close 08:28:21 Received message from Master: op=PointingHead serial=99970 08:28:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:28:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:28:21 Point started: ret=0 08:28:21 point_skyscan result=0 08:28:22 Check angles 08:28:22 SkyScan query 08:28:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.98<-21532 Statuses=0008 0009 08:28:22 Msec=0 True Az=112.995 Ze=-142.98 Az status=0008 Ze status=0009 08:28:23 Check angles 08:28:23 SkyScan query 08:28:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 08:28:23 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 08:28:23 Check angles 08:28:23 SkyScan query 08:28:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 08:28:24 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 08:28:24 Check angles 08:28:24 SkyScan query 08:28:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.1<-17340 Statuses=0008 0009 08:28:25 Msec=2250 True Az=112.995 Ze=-80.1 Az status=0008 Ze status=0009 08:28:25 Check angles 08:28:25 SkyScan query 08:28:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.71<-15914 Statuses=0008 0009 08:28:25 Msec=3000 True Az=112.995 Ze=-58.71 Az status=0008 Ze status=0009 08:28:26 Check angles 08:28:26 SkyScan query 08:28:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.725<-14515 Statuses=0008 0009 08:28:26 Msec=3750 True Az=112.995 Ze=-37.725 Az status=0008 Ze status=0009 08:28:26 Check angles 08:28:26 SkyScan query 08:28:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.785<-13119 Statuses=0008 0009 08:28:27 Msec=4500 True Az=112.995 Ze=-16.785 Az status=0008 Ze status=0009 08:28:27 Check angles 08:28:27 SkyScan query 08:28:28 SkyScan query done: ret=0 az=112.995<-7533 ze=4.14<-11724 Statuses=0008 0009 08:28:28 Msec=5250 True Az=112.995 Ze=4.14 Az status=0008 Ze status=0009 08:28:28 Check angles 08:28:28 SkyScan query 08:28:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:28:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:28:28 Message to Master queued w/err=0: serial=99970 error=0 08:28:33 Received message from Master: op=Filter serial=99971 08:28:33 Color wheel filter change from 0 to 0 08:28:33 FLIGetFilterPos err=0 currentPosition=0 08:28:33 FLIGetStepsRemaining err=0 RemainingSteps=0 08:28:33 Filter is already there-color wheel unchanged 08:28:34 Received message from Master: op=Shutter serial=99972 08:28:34 Shutter LASER close 08:28:34 Received message from Camera: op=State serial=99974 08:28:34 GetSingleValue result=40 Value=cccccccc 08:28:34 SkyScan query 08:28:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:28:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:34 Parameters OK 08:28:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:34 Set A/D data flow result=40 08:28:34 Set A/D channel type result=40 08:28:34 Set A/D encoding result=40 08:28:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:34 Set channel filter=0.000000e+000 result=40 08:28:34 Config A/D Result=40 08:28:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:34 Get A/D filter: -9.255963e+061 result=40 08:28:34 Get A/D value=-858993460 result=40 08:28:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:34 Parameters OK 08:28:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:34 Set A/D data flow result=40 08:28:34 Set A/D channel type result=40 08:28:34 Set A/D encoding result=40 08:28:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:34 Set channel filter=0.000000e+000 result=40 08:28:34 Config A/D Result=40 08:28:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:34 Get A/D filter: -9.255963e+061 result=40 08:28:34 Get A/D value=-858993460 result=40 08:28:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:28:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:28:34 Aux= 08:28:34 Message to Camera, serial 99974 queued 08:29:11 Received message from Master: op=PointingHead serial=99987 08:29:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:29:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:29:12 Point started: ret=0 08:29:12 point_skyscan result=0 08:29:12 Check angles 08:29:12 SkyScan query 08:29:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:29:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:29:13 Message to Master queued w/err=0: serial=99987 error=0 08:29:18 Received message from Master: op=Filter serial=99988 08:29:18 Color wheel filter change from 0 to 0 08:29:18 FLIGetFilterPos err=0 currentPosition=0 08:29:18 FLIGetStepsRemaining err=0 RemainingSteps=0 08:29:18 Filter is already there-color wheel unchanged 08:29:18 Received message from Master: op=Shutter serial=99989 08:29:18 Shutter LASER close 08:29:18 Received message from Camera: op=State serial=99991 08:29:18 GetSingleValue result=40 Value=cccccccc 08:29:18 SkyScan query 08:29:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:29:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:19 Parameters OK 08:29:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:19 Set A/D data flow result=40 08:29:19 Set A/D channel type result=40 08:29:19 Set A/D encoding result=40 08:29:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:19 Set channel filter=0.000000e+000 result=40 08:29:19 Config A/D Result=40 08:29:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:19 Get A/D filter: -9.255963e+061 result=40 08:29:19 Get A/D value=-858993460 result=40 08:29:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:19 Parameters OK 08:29:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:19 Set A/D data flow result=40 08:29:19 Set A/D channel type result=40 08:29:19 Set A/D encoding result=40 08:29:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:19 Set channel filter=0.000000e+000 result=40 08:29:19 Config A/D Result=40 08:29:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:19 Get A/D filter: -9.255963e+061 result=40 08:29:19 Get A/D value=-858993460 result=40 08:29:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:29:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:29:19 Aux= 08:29:19 Message to Camera, serial 99991 queued 08:29:56 Received message from Master: op=PointingHead serial=100004 08:29:56 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:29:56 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:29:56 Point started: ret=0 08:29:56 point_skyscan result=0 08:29:57 Check angles 08:29:57 SkyScan query 08:29:57 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 08:29:57 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 08:29:57 Check angles 08:29:57 SkyScan query 08:29:58 SkyScan query done: ret=0 az=153.705<-10247 ze=-6.495<-12433 Statuses=0009 0008 08:29:58 Msec=750 True Az=153.705 Ze=-6.495 Az status=0009 Ze status=0008 08:29:58 Check angles 08:29:58 SkyScan query 08:29:59 SkyScan query done: ret=0 az=171.135<-11409 ze=-6.495<-12433 Statuses=0009 0008 08:29:59 Msec=1500 True Az=171.135 Ze=-6.495 Az status=0009 Ze status=0008 08:29:59 Check angles 08:29:59 SkyScan query 08:29:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:29:59 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:29:59 Message to Master queued w/err=0: serial=100004 error=0 08:30:04 Received message from Master: op=Filter serial=100005 08:30:04 Color wheel filter change from 0 to 0 08:30:04 FLIGetFilterPos err=0 currentPosition=0 08:30:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:04 Filter is already there-color wheel unchanged 08:30:05 Received message from Master: op=Shutter serial=100006 08:30:05 Shutter LASER close 08:30:05 Received message from Camera: op=State serial=100008 08:30:05 GetSingleValue result=40 Value=cccccccc 08:30:05 SkyScan query 08:30:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:30:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:05 Parameters OK 08:30:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:05 Set A/D data flow result=40 08:30:05 Set A/D channel type result=40 08:30:05 Set A/D encoding result=40 08:30:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:05 Set channel filter=0.000000e+000 result=40 08:30:05 Config A/D Result=40 08:30:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:05 Get A/D filter: -9.255963e+061 result=40 08:30:05 Get A/D value=-858993460 result=40 08:30:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:05 Parameters OK 08:30:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:05 Set A/D data flow result=40 08:30:05 Set A/D channel type result=40 08:30:05 Set A/D encoding result=40 08:30:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:05 Set channel filter=0.000000e+000 result=40 08:30:05 Config A/D Result=40 08:30:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:05 Get A/D filter: -9.255963e+061 result=40 08:30:05 Get A/D value=-858993460 result=40 08:30:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:05 Aux= 08:30:05 Message to Camera, serial 100008 queued 08:30:42 Received message from Master: op=PointingHead serial=100021 08:30:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:30:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:30:43 Point started: ret=0 08:30:43 point_skyscan result=0 08:30:43 Check angles 08:30:43 SkyScan query 08:30:44 SkyScan query done: ret=0 az=152.58<-10172 ze=6.51<-11566 Statuses=0009 0008 08:30:44 Msec=0 True Az=152.58 Ze=6.51 Az status=0009 Ze status=0008 08:30:44 Check angles 08:30:44 SkyScan query 08:30:45 SkyScan query done: ret=0 az=134.625<-8975 ze=6.495<-11567 Statuses=0009 0008 08:30:45 Msec=750 True Az=134.625 Ze=6.495 Az status=0009 Ze status=0008 08:30:45 Check angles 08:30:45 SkyScan query 08:30:45 SkyScan query done: ret=0 az=117.21<-7814 ze=6.495<-11567 Statuses=0009 0008 08:30:45 Msec=1500 True Az=117.21 Ze=6.495 Az status=0009 Ze status=0008 08:30:46 Check angles 08:30:46 SkyScan query 08:30:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:30:46 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:30:46 Message to Master queued w/err=0: serial=100021 error=0 08:30:51 Received message from Master: op=Filter serial=100022 08:30:51 Color wheel filter change from 0 to 0 08:30:51 FLIGetFilterPos err=0 currentPosition=0 08:30:51 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:51 Filter is already there-color wheel unchanged 08:30:51 Received message from Master: op=Shutter serial=100023 08:30:51 Shutter LASER close 08:30:51 Received message from Camera: op=State serial=100025 08:30:51 GetSingleValue result=40 Value=cccccccc 08:30:51 SkyScan query 08:30:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:30:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:52 Parameters OK 08:30:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:52 Set A/D data flow result=40 08:30:52 Set A/D channel type result=40 08:30:52 Set A/D encoding result=40 08:30:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:52 Set channel filter=0.000000e+000 result=40 08:30:52 Config A/D Result=40 08:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:52 Get A/D filter: -9.255963e+061 result=40 08:30:52 Get A/D value=-858993460 result=40 08:30:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:52 Parameters OK 08:30:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:52 Set A/D data flow result=40 08:30:52 Set A/D channel type result=40 08:30:52 Set A/D encoding result=40 08:30:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:52 Set channel filter=0.000000e+000 result=40 08:30:52 Config A/D Result=40 08:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:52 Get A/D filter: -9.255963e+061 result=40 08:30:52 Get A/D value=-858993460 result=40 08:30:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:52 Aux= 08:30:52 Message to Camera, serial 100025 queued 08:31:29 Received message from Master: op=PointingHead serial=100038 08:31:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:31:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:31:29 Point started: ret=0 08:31:29 point_skyscan result=0 08:31:30 Check angles 08:31:30 SkyScan query 08:31:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.85<-13590 Statuses=0008 0009 08:31:30 Msec=0 True Az=112.995 Ze=-23.85 Az status=0008 Ze status=0009 08:31:31 Check angles 08:31:31 SkyScan query 08:31:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.76<-14984 Statuses=0008 0009 08:31:31 Msec=750 True Az=112.995 Ze=-44.76 Az status=0008 Ze status=0009 08:31:31 Check angles 08:31:31 SkyScan query 08:31:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.73<-16382 Statuses=0008 0009 08:31:32 Msec=1500 True Az=112.995 Ze=-65.73 Az status=0008 Ze status=0009 08:31:32 Check angles 08:31:32 SkyScan query 08:31:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.67<-17778 Statuses=0008 0009 08:31:33 Msec=2250 True Az=112.995 Ze=-86.67 Az status=0008 Ze status=0009 08:31:33 Check angles 08:31:33 SkyScan query 08:31:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.655<-19177 Statuses=0008 0009 08:31:33 Msec=3000 True Az=112.995 Ze=-107.655 Az status=0008 Ze status=0009 08:31:34 Check angles 08:31:34 SkyScan query 08:31:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.58<-20572 Statuses=0008 0009 08:31:34 Msec=3750 True Az=112.995 Ze=-128.58 Az status=0008 Ze status=0009 08:31:34 Check angles 08:31:34 SkyScan query 08:31:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.595<-21973 Statuses=0008 0009 08:31:35 Msec=4500 True Az=112.995 Ze=-149.595 Az status=0008 Ze status=0009 08:31:35 Check angles 08:31:35 SkyScan query 08:31:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.505<-23367 Statuses=0008 0009 08:31:36 Msec=5250 True Az=112.995 Ze=-170.505 Az status=0008 Ze status=0009 08:31:36 Check angles 08:31:36 SkyScan query 08:31:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:31:36 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:31:36 Message to Master queued w/err=0: serial=100038 error=0 08:31:41 Received message from Master: op=Filter serial=100039 08:31:41 Color wheel filter change from 0 to 0 08:31:41 FLIGetFilterPos err=0 currentPosition=0 08:31:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:31:41 Filter is already there-color wheel unchanged 08:31:42 Received message from Master: op=Shutter serial=100040 08:31:42 Shutter LASER open 08:31:42 Received message from Camera: op=State serial=100042 08:31:42 GetSingleValue result=40 Value=cccccccc 08:31:42 SkyScan query 08:31:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:31:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:42 Parameters OK 08:31:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:42 Set A/D data flow result=40 08:31:42 Set A/D channel type result=40 08:31:42 Set A/D encoding result=40 08:31:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:42 Set channel filter=0.000000e+000 result=40 08:31:42 Config A/D Result=40 08:31:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:42 Get A/D filter: -9.255963e+061 result=40 08:31:42 Get A/D value=-858993460 result=40 08:31:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:42 Parameters OK 08:31:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:42 Set A/D data flow result=40 08:31:42 Set A/D channel type result=40 08:31:42 Set A/D encoding result=40 08:31:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:42 Set channel filter=0.000000e+000 result=40 08:31:42 Config A/D Result=40 08:31:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:42 Get A/D filter: -9.255963e+061 result=40 08:31:42 Get A/D value=-858993460 result=40 08:31:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:31:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:31:42 Aux= 08:31:42 Message to Camera, serial 100042 queued 08:31:51 Received message from Master: op=Shutter serial=100052 08:31:51 Shutter LASER close 08:31:51 Received message from Master: op=PointingHead serial=100056 08:31:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:31:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:31:52 Point started: ret=0 08:31:52 point_skyscan result=0 08:31:52 Check angles 08:31:52 SkyScan query 08:31:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 08:31:53 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 08:31:53 Check angles 08:31:53 SkyScan query 08:31:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 08:31:54 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 08:31:54 Check angles 08:31:54 SkyScan query 08:31:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.175<-18745 Statuses=0008 0009 08:31:54 Msec=1500 True Az=112.995 Ze=-101.175 Az status=0008 Ze status=0009 08:31:55 Check angles 08:31:55 SkyScan query 08:31:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.205<-17347 Statuses=0008 0009 08:31:55 Msec=2250 True Az=112.995 Ze=-80.205 Az status=0008 Ze status=0009 08:31:55 Check angles 08:31:55 SkyScan query 08:31:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 08:31:56 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 08:31:56 Check angles 08:31:56 SkyScan query 08:31:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.265<-14551 Statuses=0008 0009 08:31:57 Msec=3750 True Az=112.995 Ze=-38.265 Az status=0008 Ze status=0009 08:31:57 Check angles 08:31:57 SkyScan query 08:31:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.34<-13156 Statuses=0008 0009 08:31:57 Msec=4500 True Az=112.995 Ze=-17.34 Az status=0008 Ze status=0009 08:31:58 Check angles 08:31:58 SkyScan query 08:31:58 SkyScan query done: ret=0 az=112.995<-7533 ze=3.66<-11756 Statuses=0008 0009 08:31:58 Msec=5250 True Az=112.995 Ze=3.66 Az status=0008 Ze status=0009 08:31:58 Check angles 08:31:58 SkyScan query 08:31:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:31:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:31:59 Message to Master queued w/err=0: serial=100056 error=0 08:32:04 Received message from Master: op=Filter serial=100057 08:32:04 Color wheel filter change from 0 to 0 08:32:04 FLIGetFilterPos err=0 currentPosition=0 08:32:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:32:04 Filter is already there-color wheel unchanged 08:32:04 Received message from Master: op=Shutter serial=100058 08:32:04 Shutter LASER close 08:32:04 Received message from Camera: op=State serial=100060 08:32:04 GetSingleValue result=40 Value=cccccccc 08:32:04 SkyScan query 08:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:32:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:05 Parameters OK 08:32:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:05 Set A/D data flow result=40 08:32:05 Set A/D channel type result=40 08:32:05 Set A/D encoding result=40 08:32:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:05 Set channel filter=0.000000e+000 result=40 08:32:05 Config A/D Result=40 08:32:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:05 Get A/D filter: -9.255963e+061 result=40 08:32:05 Get A/D value=-858993460 result=40 08:32:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:05 Parameters OK 08:32:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:05 Set A/D data flow result=40 08:32:05 Set A/D channel type result=40 08:32:05 Set A/D encoding result=40 08:32:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:05 Set channel filter=0.000000e+000 result=40 08:32:05 Config A/D Result=40 08:32:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:05 Get A/D filter: -9.255963e+061 result=40 08:32:05 Get A/D value=-858993460 result=40 08:32:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:32:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:32:05 Aux= 08:32:05 Message to Camera, serial 100060 queued 08:32:42 Received message from Master: op=PointingHead serial=100073 08:32:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:32:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:32:42 Point started: ret=0 08:32:42 point_skyscan result=0 08:32:43 Check angles 08:32:43 SkyScan query 08:32:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:32:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:32:43 Message to Master queued w/err=0: serial=100073 error=0 08:32:48 Received message from Master: op=Filter serial=100074 08:32:48 Color wheel filter change from 0 to 0 08:32:48 FLIGetFilterPos err=0 currentPosition=0 08:32:48 FLIGetStepsRemaining err=0 RemainingSteps=0 08:32:48 Filter is already there-color wheel unchanged 08:32:48 Received message from Master: op=Shutter serial=100075 08:32:48 Shutter LASER close 08:32:49 Received message from Camera: op=State serial=100077 08:32:49 GetSingleValue result=40 Value=cccccccc 08:32:49 SkyScan query 08:32:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:32:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:49 Parameters OK 08:32:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:49 Set A/D data flow result=40 08:32:49 Set A/D channel type result=40 08:32:49 Set A/D encoding result=40 08:32:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:49 Set channel filter=0.000000e+000 result=40 08:32:49 Config A/D Result=40 08:32:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:49 Get A/D filter: -9.255963e+061 result=40 08:32:49 Get A/D value=-858993460 result=40 08:32:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:49 Parameters OK 08:32:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:49 Set A/D data flow result=40 08:32:49 Set A/D channel type result=40 08:32:49 Set A/D encoding result=40 08:32:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:49 Set channel filter=0.000000e+000 result=40 08:32:49 Config A/D Result=40 08:32:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:49 Get A/D filter: -9.255963e+061 result=40 08:32:49 Get A/D value=-858993460 result=40 08:32:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:32:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:32:49 Aux= 08:32:49 Message to Camera, serial 100077 queued 08:33:26 Received message from Master: op=PointingHead serial=100090 08:33:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:33:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:33:26 Point started: ret=0 08:33:26 point_skyscan result=0 08:33:27 Check angles 08:33:27 SkyScan query 08:33:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:33:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:33:28 Message to Master queued w/err=0: serial=100090 error=0 08:33:33 Received message from Master: op=Filter serial=100091 08:33:33 Color wheel filter change from 0 to 0 08:33:33 FLIGetFilterPos err=0 currentPosition=0 08:33:33 FLIGetStepsRemaining err=0 RemainingSteps=0 08:33:33 Filter is already there-color wheel unchanged 08:33:33 Received message from Master: op=Shutter serial=100092 08:33:33 Shutter LASER close 08:33:33 Received message from Camera: op=State serial=100094 08:33:33 GetSingleValue result=40 Value=cccccccc 08:33:33 SkyScan query 08:33:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:33:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:33 Parameters OK 08:33:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:33 Set A/D data flow result=40 08:33:33 Set A/D channel type result=40 08:33:33 Set A/D encoding result=40 08:33:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:33 Set channel filter=0.000000e+000 result=40 08:33:33 Config A/D Result=40 08:33:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:33 Get A/D filter: -9.255963e+061 result=40 08:33:33 Get A/D value=-858993460 result=40 08:33:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:33 Parameters OK 08:33:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:33 Set A/D data flow result=40 08:33:33 Set A/D channel type result=40 08:33:33 Set A/D encoding result=40 08:33:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:33 Set channel filter=0.000000e+000 result=40 08:33:33 Config A/D Result=40 08:33:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:33 Get A/D filter: -9.255963e+061 result=40 08:33:33 Get A/D value=-858993460 result=40 08:33:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:33:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:33:33 Aux= 08:33:33 Message to Camera, serial 100094 queued 08:33:38 Received message from Master: op=Identify serial=100095 08:34:10 Received message from Master: op=PointingHead serial=100110 08:34:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:34:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:34:11 Point started: ret=0 08:34:11 point_skyscan result=0 08:34:11 Check angles 08:34:11 SkyScan query 08:34:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:34:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:34:12 Message to Master queued w/err=0: serial=100110 error=0 08:34:17 Received message from Master: op=Filter serial=100111 08:34:17 Color wheel filter change from 0 to 0 08:34:17 FLIGetFilterPos err=0 currentPosition=0 08:34:17 FLIGetStepsRemaining err=0 RemainingSteps=0 08:34:17 Filter is already there-color wheel unchanged 08:34:17 Received message from Master: op=Shutter serial=100112 [UTC 2019-3-4 08:34:17] 08:34:17 Shutter LASER close 08:34:17 Received message from Camera: op=State serial=100114 08:34:17 GetSingleValue result=40 Value=cccccccc 08:34:17 SkyScan query 08:34:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:34:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:18 Parameters OK 08:34:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:18 Set A/D data flow result=40 08:34:18 Set A/D channel type result=40 08:34:18 Set A/D encoding result=40 08:34:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:18 Set channel filter=0.000000e+000 result=40 08:34:18 Config A/D Result=40 08:34:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:18 Get A/D filter: -9.255963e+061 result=40 08:34:18 Get A/D value=-858993460 result=40 08:34:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:18 Parameters OK 08:34:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:18 Set A/D data flow result=40 08:34:18 Set A/D channel type result=40 08:34:18 Set A/D encoding result=40 08:34:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:18 Set channel filter=0.000000e+000 result=40 08:34:18 Config A/D Result=40 08:34:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:18 Get A/D filter: -9.255963e+061 result=40 08:34:18 Get A/D value=-858993460 result=40 08:34:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:34:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:34:18 Aux= 08:34:18 Message to Camera, serial 100114 queued 08:34:55 Received message from Master: op=PointingHead serial=100127 08:34:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:34:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:34:55 Point started: ret=0 08:34:55 point_skyscan result=0 08:34:56 Check angles 08:34:56 SkyScan query 08:34:56 SkyScan query done: ret=0 az=113.01<-7534 ze=-23.175<-13545 Statuses=0008 0009 08:34:56 Msec=0 True Az=113.01 Ze=-23.175 Az status=0008 Ze status=0009 08:34:56 Check angles 08:34:56 SkyScan query 08:34:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.19<-14946 Statuses=0008 0009 08:34:57 Msec=750 True Az=112.995 Ze=-44.19 Az status=0008 Ze status=0009 08:34:57 Check angles 08:34:57 SkyScan query 08:34:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.1<-16340 Statuses=0008 0009 08:34:58 Msec=1500 True Az=112.995 Ze=-65.1 Az status=0008 Ze status=0009 08:34:58 Check angles 08:34:58 SkyScan query 08:34:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.07<-17738 Statuses=0008 0009 08:34:59 Msec=2250 True Az=112.995 Ze=-86.07 Az status=0008 Ze status=0009 08:34:59 Check angles 08:34:59 SkyScan query 08:34:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.01<-19134 Statuses=0008 0009 08:34:59 Msec=3000 True Az=112.995 Ze=-107.01 Az status=0008 Ze status=0009 08:34:59 Check angles 08:34:59 SkyScan query 08:35:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.935<-20529 Statuses=0008 0009 08:35:00 Msec=3750 True Az=112.995 Ze=-127.935 Az status=0008 Ze status=0009 08:35:00 Check angles 08:35:00 SkyScan query 08:35:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.86<-21924 Statuses=0008 0009 08:35:01 Msec=4500 True Az=112.995 Ze=-148.86 Az status=0008 Ze status=0009 08:35:01 Check angles 08:35:01 SkyScan query 08:35:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.83<-23322 Statuses=0008 0009 08:35:02 Msec=5250 True Az=112.995 Ze=-169.83 Az status=0008 Ze status=0009 08:35:02 Check angles 08:35:02 SkyScan query 08:35:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:35:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:35:02 Message to Master queued w/err=0: serial=100127 error=0 08:35:07 Received message from Master: op=Filter serial=100128 08:35:07 Color wheel filter change from 0 to 0 08:35:07 FLIGetFilterPos err=0 currentPosition=0 08:35:07 FLIGetStepsRemaining err=0 RemainingSteps=0 08:35:07 Filter is already there-color wheel unchanged 08:35:07 Received message from Master: op=Shutter serial=100129 08:35:07 Shutter LASER open 08:35:08 Received message from Camera: op=State serial=100131 08:35:08 GetSingleValue result=40 Value=cccccccc 08:35:08 SkyScan query 08:35:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:35:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:08 Parameters OK 08:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:08 Set A/D data flow result=40 08:35:08 Set A/D channel type result=40 08:35:08 Set A/D encoding result=40 08:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:08 Set channel filter=0.000000e+000 result=40 08:35:08 Config A/D Result=40 08:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:08 Get A/D filter: -9.255963e+061 result=40 08:35:08 Get A/D value=-858993460 result=40 08:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:08 Parameters OK 08:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:08 Set A/D data flow result=40 08:35:08 Set A/D channel type result=40 08:35:08 Set A/D encoding result=40 08:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:08 Set channel filter=0.000000e+000 result=40 08:35:08 Config A/D Result=40 08:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:08 Get A/D filter: -9.255963e+061 result=40 08:35:08 Get A/D value=-858993460 result=40 08:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:35:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:35:08 Aux= 08:35:08 Message to Camera, serial 100131 queued 08:35:17 Received message from Master: op=Shutter serial=100141 08:35:17 Shutter LASER close 08:35:17 Received message from Master: op=PointingHead serial=100145 08:35:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:35:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:35:18 Point started: ret=0 08:35:18 point_skyscan result=0 08:35:18 Check angles 08:35:18 SkyScan query 08:35:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 08:35:19 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 08:35:19 Check angles 08:35:19 SkyScan query 08:35:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.565<-20171 Statuses=0008 0009 08:35:20 Msec=750 True Az=112.995 Ze=-122.565 Az status=0008 Ze status=0009 08:35:20 Check angles 08:35:20 SkyScan query 08:35:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.58<-18772 Statuses=0008 0009 08:35:20 Msec=1500 True Az=112.995 Ze=-101.58 Az status=0008 Ze status=0009 08:35:21 Check angles 08:35:21 SkyScan query 08:35:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.61<-17374 Statuses=0008 0009 08:35:21 Msec=2250 True Az=112.995 Ze=-80.61 Az status=0008 Ze status=0009 08:35:21 Check angles 08:35:21 SkyScan query 08:35:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 08:35:22 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 08:35:22 Check angles 08:35:22 SkyScan query 08:35:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.235<-14549 Statuses=0008 0009 08:35:23 Msec=3750 True Az=112.995 Ze=-38.235 Az status=0008 Ze status=0009 08:35:23 Check angles 08:35:23 SkyScan query 08:35:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.31<-13154 Statuses=0008 0009 08:35:23 Msec=4500 True Az=112.995 Ze=-17.31 Az status=0008 Ze status=0009 08:35:24 Check angles 08:35:24 SkyScan query 08:35:24 SkyScan query done: ret=0 az=112.995<-7533 ze=3.675<-11755 Statuses=0008 0009 08:35:24 Msec=5250 True Az=112.995 Ze=3.675 Az status=0008 Ze status=0009 08:35:24 Check angles 08:35:24 SkyScan query 08:35:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:35:25 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:35:25 Message to Master queued w/err=0: serial=100145 error=0 08:35:30 Received message from Master: op=Filter serial=100146 08:35:30 Color wheel filter change from 0 to 0 08:35:30 FLIGetFilterPos err=0 currentPosition=0 08:35:30 FLIGetStepsRemaining err=0 RemainingSteps=0 08:35:30 Filter is already there-color wheel unchanged 08:35:30 Received message from Master: op=Shutter serial=100147 08:35:30 Shutter LASER close 08:35:30 Received message from Camera: op=State serial=100149 08:35:30 GetSingleValue result=40 Value=cccccccc 08:35:30 SkyScan query 08:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:35:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:31 Parameters OK 08:35:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:31 Set A/D data flow result=40 08:35:31 Set A/D channel type result=40 08:35:31 Set A/D encoding result=40 08:35:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:31 Set channel filter=0.000000e+000 result=40 08:35:31 Config A/D Result=40 08:35:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:31 Get A/D filter: -9.255963e+061 result=40 08:35:31 Get A/D value=-858993460 result=40 08:35:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:31 Parameters OK 08:35:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:31 Set A/D data flow result=40 08:35:31 Set A/D channel type result=40 08:35:31 Set A/D encoding result=40 08:35:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:31 Set channel filter=0.000000e+000 result=40 08:35:31 Config A/D Result=40 08:35:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:31 Get A/D filter: -9.255963e+061 result=40 08:35:31 Get A/D value=-858993460 result=40 08:35:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:35:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:35:31 Aux= 08:35:31 Message to Camera, serial 100149 queued 08:36:08 Received message from Master: op=PointingHead serial=100162 08:36:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:36:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:36:08 Point started: ret=0 08:36:08 point_skyscan result=0 08:36:09 Check angles 08:36:09 SkyScan query 08:36:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:36:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:36:09 Message to Master queued w/err=0: serial=100162 error=0 08:36:14 Received message from Master: op=Filter serial=100163 08:36:14 Color wheel filter change from 0 to 0 08:36:14 FLIGetFilterPos err=0 currentPosition=0 08:36:14 FLIGetStepsRemaining err=0 RemainingSteps=0 08:36:14 Filter is already there-color wheel unchanged 08:36:15 Received message from Master: op=Shutter serial=100164 08:36:15 Shutter LASER close 08:36:15 Received message from Camera: op=State serial=100166 08:36:15 GetSingleValue result=40 Value=cccccccc 08:36:15 SkyScan query 08:36:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:36:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:15 Parameters OK 08:36:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:15 Set A/D data flow result=40 08:36:15 Set A/D channel type result=40 08:36:15 Set A/D encoding result=40 08:36:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:15 Set channel filter=0.000000e+000 result=40 08:36:15 Config A/D Result=40 08:36:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:15 Get A/D filter: -9.255963e+061 result=40 08:36:15 Get A/D value=-858993460 result=40 08:36:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:15 Parameters OK 08:36:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:15 Set A/D data flow result=40 08:36:15 Set A/D channel type result=40 08:36:15 Set A/D encoding result=40 08:36:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:15 Set channel filter=0.000000e+000 result=40 08:36:15 Config A/D Result=40 08:36:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:15 Get A/D filter: -9.255963e+061 result=40 08:36:15 Get A/D value=-858993460 result=40 08:36:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:36:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:36:15 Aux= 08:36:15 Message to Camera, serial 100166 queued 08:36:52 Received message from Master: op=PointingHead serial=100179 08:36:52 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:36:52 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:36:52 Point started: ret=0 08:36:52 point_skyscan result=0 08:36:53 Check angles 08:36:53 SkyScan query 08:36:54 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 08:36:54 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 08:36:54 Check angles 08:36:54 SkyScan query 08:36:54 SkyScan query done: ret=0 az=153.735<-10249 ze=-6.495<-12433 Statuses=0009 0008 08:36:54 Msec=750 True Az=153.735 Ze=-6.495 Az status=0009 Ze status=0008 08:36:55 Check angles 08:36:55 SkyScan query 08:36:55 SkyScan query done: ret=0 az=171.15<-11410 ze=-6.495<-12433 Statuses=0009 0008 08:36:55 Msec=1500 True Az=171.15 Ze=-6.495 Az status=0009 Ze status=0008 08:36:55 Check angles 08:36:55 SkyScan query 08:36:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:36:56 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:36:56 Message to Master queued w/err=0: serial=100179 error=0 08:37:01 Received message from Master: op=Filter serial=100180 08:37:01 Color wheel filter change from 0 to 0 08:37:01 FLIGetFilterPos err=0 currentPosition=0 08:37:01 FLIGetStepsRemaining err=0 RemainingSteps=0 08:37:01 Filter is already there-color wheel unchanged 08:37:01 Received message from Master: op=Shutter serial=100181 08:37:01 Shutter LASER close 08:37:01 Received message from Camera: op=State serial=100183 08:37:01 GetSingleValue result=40 Value=cccccccc 08:37:01 SkyScan query 08:37:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:37:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:02 Parameters OK 08:37:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:02 Set A/D data flow result=40 08:37:02 Set A/D channel type result=40 08:37:02 Set A/D encoding result=40 08:37:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:02 Set channel filter=0.000000e+000 result=40 08:37:02 Config A/D Result=40 08:37:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:02 Get A/D filter: -9.255963e+061 result=40 08:37:02 Get A/D value=-858993460 result=40 08:37:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:02 Parameters OK 08:37:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:02 Set A/D data flow result=40 08:37:02 Set A/D channel type result=40 08:37:02 Set A/D encoding result=40 08:37:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:02 Set channel filter=0.000000e+000 result=40 08:37:02 Config A/D Result=40 08:37:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:02 Get A/D filter: -9.255963e+061 result=40 08:37:02 Get A/D value=-858993460 result=40 08:37:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:37:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:37:02 Aux= 08:37:02 Message to Camera, serial 100183 queued 08:37:39 Received message from Master: op=PointingHead serial=100196 08:37:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:37:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:37:39 Point started: ret=0 08:37:39 point_skyscan result=0 08:37:40 Check angles 08:37:40 SkyScan query 08:37:40 SkyScan query done: ret=0 az=153.225<-10215 ze=6.51<-11566 Statuses=0009 0008 08:37:40 Msec=0 True Az=153.225 Ze=6.51 Az status=0009 Ze status=0008 08:37:40 Check angles 08:37:40 SkyScan query 08:37:41 SkyScan query done: ret=0 az=135.75<-9050 ze=6.495<-11567 Statuses=0009 0008 08:37:41 Msec=750 True Az=135.75 Ze=6.495 Az status=0009 Ze status=0008 08:37:41 Check angles 08:37:41 SkyScan query 08:37:42 SkyScan query done: ret=0 az=117.87<-7858 ze=6.495<-11567 Statuses=0009 0008 08:37:42 Msec=1500 True Az=117.87 Ze=6.495 Az status=0009 Ze status=0008 08:37:42 Check angles 08:37:42 SkyScan query 08:37:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:37:42 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:37:42 Message to Master queued w/err=0: serial=100196 error=0 08:37:47 Received message from Master: op=Filter serial=100197 08:37:47 Color wheel filter change from 0 to 0 08:37:47 FLIGetFilterPos err=0 currentPosition=0 08:37:47 FLIGetStepsRemaining err=0 RemainingSteps=0 08:37:47 Filter is already there-color wheel unchanged 08:37:48 Received message from Master: op=Shutter serial=100198 08:37:48 Shutter LASER close 08:37:48 Received message from Camera: op=State serial=100200 08:37:48 GetSingleValue result=40 Value=cccccccc 08:37:48 SkyScan query 08:37:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:37:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:48 Parameters OK 08:37:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:48 Set A/D data flow result=40 08:37:48 Set A/D channel type result=40 08:37:48 Set A/D encoding result=40 08:37:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:48 Set channel filter=0.000000e+000 result=40 08:37:48 Config A/D Result=40 08:37:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:48 Get A/D filter: -9.255963e+061 result=40 08:37:48 Get A/D value=-858993460 result=40 08:37:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:48 Parameters OK 08:37:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:48 Set A/D data flow result=40 08:37:48 Set A/D channel type result=40 08:37:48 Set A/D encoding result=40 08:37:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:48 Set channel filter=0.000000e+000 result=40 08:37:48 Config A/D Result=40 08:37:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:48 Get A/D filter: -9.255963e+061 result=40 08:37:48 Get A/D value=-858993460 result=40 08:37:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:37:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:37:48 Aux= 08:37:48 Message to Camera, serial 100200 queued 08:38:25 Received message from Master: op=PointingHead serial=100213 08:38:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:38:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:38:25 Point started: ret=0 08:38:25 point_skyscan result=0 08:38:26 Check angles 08:38:26 SkyScan query 08:38:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 08:38:27 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 08:38:27 Check angles 08:38:27 SkyScan query 08:38:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 08:38:28 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 08:38:28 Check angles 08:38:28 SkyScan query 08:38:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.165<-16411 Statuses=0008 0009 08:38:28 Msec=1500 True Az=112.995 Ze=-66.165 Az status=0008 Ze status=0009 08:38:28 Check angles 08:38:28 SkyScan query 08:38:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.135<-17809 Statuses=0008 0009 08:38:29 Msec=2250 True Az=112.995 Ze=-87.135 Az status=0008 Ze status=0009 08:38:29 Check angles 08:38:29 SkyScan query 08:38:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.09<-19206 Statuses=0008 0009 08:38:30 Msec=3000 True Az=112.995 Ze=-108.09 Az status=0008 Ze status=0009 08:38:30 Check angles 08:38:30 SkyScan query 08:38:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.495<-20633 Statuses=0008 0009 08:38:31 Msec=3750 True Az=112.995 Ze=-129.495 Az status=0008 Ze status=0009 08:38:31 Check angles 08:38:31 SkyScan query 08:38:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.405<-22027 Statuses=0008 0009 08:38:31 Msec=4500 True Az=112.995 Ze=-150.405 Az status=0008 Ze status=0009 08:38:31 Check angles 08:38:31 SkyScan query 08:38:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0008 0009 08:38:32 Msec=5250 True Az=112.995 Ze=-171.195 Az status=0008 Ze status=0009 08:38:32 Check angles 08:38:32 SkyScan query 08:38:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:38:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:38:33 Message to Master queued w/err=0: serial=100213 error=0 08:38:38 Received message from Master: op=Filter serial=100214 08:38:38 Color wheel filter change from 0 to 0 08:38:38 FLIGetFilterPos err=0 currentPosition=0 08:38:38 FLIGetStepsRemaining err=0 RemainingSteps=0 08:38:38 Filter is already there-color wheel unchanged 08:38:38 Received message from Master: op=Shutter serial=100215 08:38:38 Shutter LASER open 08:38:38 Received message from Camera: op=State serial=100217 08:38:38 GetSingleValue result=40 Value=cccccccc 08:38:38 SkyScan query 08:38:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:38:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:39 Parameters OK 08:38:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:39 Set A/D data flow result=40 08:38:39 Set A/D channel type result=40 08:38:39 Set A/D encoding result=40 08:38:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:39 Set channel filter=0.000000e+000 result=40 08:38:39 Config A/D Result=40 08:38:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:39 Get A/D filter: -9.255963e+061 result=40 08:38:39 Get A/D value=-858993460 result=40 08:38:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:39 Parameters OK 08:38:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:39 Set A/D data flow result=40 08:38:39 Set A/D channel type result=40 08:38:39 Set A/D encoding result=40 08:38:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:39 Set channel filter=0.000000e+000 result=40 08:38:39 Config A/D Result=40 08:38:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:39 Get A/D filter: -9.255963e+061 result=40 08:38:39 Get A/D value=-858993460 result=40 08:38:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:38:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:38:39 Aux= 08:38:39 Message to Camera, serial 100217 queued 08:38:47 Received message from Master: op=Shutter serial=100227 08:38:47 Shutter LASER close 08:38:48 Received message from Master: op=PointingHead serial=100231 08:38:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:38:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:38:48 Point started: ret=0 08:38:48 point_skyscan result=0 08:38:49 Check angles 08:38:49 SkyScan query 08:38:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 08:38:49 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 08:38:49 Check angles 08:38:49 SkyScan query 08:38:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.4<-20160 Statuses=0008 0009 08:38:50 Msec=750 True Az=112.995 Ze=-122.4 Az status=0008 Ze status=0009 08:38:50 Check angles 08:38:50 SkyScan query 08:38:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.43<-18762 Statuses=0008 0009 08:38:51 Msec=1500 True Az=112.995 Ze=-101.43 Az status=0008 Ze status=0009 08:38:51 Check angles 08:38:51 SkyScan query 08:38:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.46<-17364 Statuses=0008 0009 08:38:52 Msec=2250 True Az=112.995 Ze=-80.46 Az status=0008 Ze status=0009 08:38:52 Check angles 08:38:52 SkyScan query 08:38:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.505<-15967 Statuses=0008 0009 08:38:52 Msec=3000 True Az=112.995 Ze=-59.505 Az status=0008 Ze status=0009 08:38:52 Check angles 08:38:52 SkyScan query 08:38:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.55<-14570 Statuses=0008 0009 08:38:53 Msec=3750 True Az=112.995 Ze=-38.55 Az status=0008 Ze status=0009 08:38:53 Check angles 08:38:53 SkyScan query 08:38:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.595<-13173 Statuses=0008 0009 08:38:54 Msec=4500 True Az=112.995 Ze=-17.595 Az status=0008 Ze status=0009 08:38:54 Check angles 08:38:54 SkyScan query 08:38:55 SkyScan query done: ret=0 az=112.995<-7533 ze=3.375<-11775 Statuses=0008 0009 08:38:55 Msec=5250 True Az=112.995 Ze=3.375 Az status=0008 Ze status=0009 08:38:55 Check angles 08:38:55 SkyScan query 08:38:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:38:55 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:38:55 Message to Master queued w/err=0: serial=100231 error=0 08:39:00 Received message from Master: op=Filter serial=100232 08:39:00 Color wheel filter change from 0 to 0 08:39:00 FLIGetFilterPos err=0 currentPosition=0 08:39:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:39:00 Filter is already there-color wheel unchanged 08:39:00 Received message from Master: op=Shutter serial=100233 08:39:00 Shutter LASER close 08:39:01 Received message from Camera: op=State serial=100235 08:39:01 GetSingleValue result=40 Value=cccccccc 08:39:01 SkyScan query 08:39:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:39:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:01 Parameters OK 08:39:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:01 Set A/D data flow result=40 08:39:01 Set A/D channel type result=40 08:39:01 Set A/D encoding result=40 08:39:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:01 Set channel filter=0.000000e+000 result=40 08:39:01 Config A/D Result=40 08:39:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:01 Get A/D filter: -9.255963e+061 result=40 08:39:01 Get A/D value=-858993460 result=40 08:39:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:01 Parameters OK 08:39:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:01 Set A/D data flow result=40 08:39:01 Set A/D channel type result=40 08:39:01 Set A/D encoding result=40 08:39:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:01 Set channel filter=0.000000e+000 result=40 08:39:01 Config A/D Result=40 08:39:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:01 Get A/D filter: -9.255963e+061 result=40 08:39:01 Get A/D value=-858993460 result=40 08:39:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:39:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:39:01 Aux= 08:39:01 Message to Camera, serial 100235 queued 08:39:37 Received message from Master: op=PointingHead serial=100247 08:39:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:39:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:39:37 Point started: ret=0 08:39:37 point_skyscan result=0 08:39:38 Check angles 08:39:38 SkyScan query 08:39:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:39:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:39:39 Message to Master queued w/err=0: serial=100247 error=0 08:39:44 Received message from Master: op=Filter serial=100248 08:39:44 Color wheel filter change from 0 to 0 08:39:44 FLIGetFilterPos err=0 currentPosition=0 08:39:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:39:44 Filter is already there-color wheel unchanged 08:39:44 Received message from Master: op=Shutter serial=100249 08:39:44 Shutter LASER close 08:39:44 Received message from Camera: op=State serial=100251 08:39:44 GetSingleValue result=40 Value=cccccccc 08:39:44 SkyScan query 08:39:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:39:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:45 Parameters OK 08:39:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:45 Set A/D data flow result=40 08:39:45 Set A/D channel type result=40 08:39:45 Set A/D encoding result=40 08:39:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:45 Set channel filter=0.000000e+000 result=40 08:39:45 Config A/D Result=40 08:39:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:45 Get A/D filter: -9.255963e+061 result=40 08:39:45 Get A/D value=-858993460 result=40 08:39:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:45 Parameters OK 08:39:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:45 Set A/D data flow result=40 08:39:45 Set A/D channel type result=40 08:39:45 Set A/D encoding result=40 08:39:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:45 Set channel filter=0.000000e+000 result=40 08:39:45 Config A/D Result=40 08:39:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:45 Get A/D filter: -9.255963e+061 result=40 08:39:45 Get A/D value=-858993460 result=40 08:39:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:39:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:39:45 Aux= 08:39:45 Message to Camera, serial 100251 queued 08:40:21 Received message from Master: op=PointingHead serial=100264 08:40:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:40:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:40:22 Point started: ret=0 08:40:22 point_skyscan result=0 08:40:22 Check angles 08:40:22 SkyScan query 08:40:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:40:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:40:23 Message to Master queued w/err=0: serial=100264 error=0 08:40:28 Received message from Master: op=Filter serial=100265 08:40:28 Color wheel filter change from 0 to 0 08:40:28 FLIGetFilterPos err=0 currentPosition=0 08:40:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:40:28 Filter is already there-color wheel unchanged 08:40:28 Received message from Master: op=Shutter serial=100266 08:40:28 Shutter LASER close 08:40:28 Received message from Camera: op=State serial=100268 08:40:28 GetSingleValue result=40 Value=cccccccc 08:40:28 SkyScan query 08:40:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:40:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:29 Parameters OK 08:40:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:29 Set A/D data flow result=40 08:40:29 Set A/D channel type result=40 08:40:29 Set A/D encoding result=40 08:40:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:29 Set channel filter=0.000000e+000 result=40 08:40:29 Config A/D Result=40 08:40:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:29 Get A/D filter: -9.255963e+061 result=40 08:40:29 Get A/D value=-858993460 result=40 08:40:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:29 Parameters OK 08:40:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:29 Set A/D data flow result=40 08:40:29 Set A/D channel type result=40 08:40:29 Set A/D encoding result=40 08:40:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:29 Set channel filter=0.000000e+000 result=40 08:40:29 Config A/D Result=40 08:40:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:29 Get A/D filter: -9.255963e+061 result=40 08:40:29 Get A/D value=-858993460 result=40 08:40:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:40:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:40:29 Aux= 08:40:29 Message to Camera, serial 100268 queued 08:41:06 Received message from Master: op=PointingHead serial=100281 08:41:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:41:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:41:06 Point started: ret=0 08:41:06 point_skyscan result=0 08:41:07 Check angles 08:41:07 SkyScan query 08:41:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:41:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:41:07 Message to Master queued w/err=0: serial=100281 error=0 08:41:12 Received message from Master: op=Filter serial=100282 08:41:12 Color wheel filter change from 0 to 0 08:41:12 FLIGetFilterPos err=0 currentPosition=0 08:41:12 FLIGetStepsRemaining err=0 RemainingSteps=0 08:41:12 Filter is already there-color wheel unchanged 08:41:13 Received message from Master: op=Shutter serial=100283 08:41:13 Shutter LASER close 08:41:13 Received message from Camera: op=State serial=100285 08:41:13 GetSingleValue result=40 Value=cccccccc 08:41:13 SkyScan query 08:41:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:41:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:13 Parameters OK 08:41:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:13 Set A/D data flow result=40 08:41:13 Set A/D channel type result=40 08:41:13 Set A/D encoding result=40 08:41:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:13 Set channel filter=0.000000e+000 result=40 08:41:13 Config A/D Result=40 08:41:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:13 Get A/D filter: -9.255963e+061 result=40 08:41:13 Get A/D value=-858993460 result=40 08:41:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:13 Parameters OK 08:41:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:13 Set A/D data flow result=40 08:41:13 Set A/D channel type result=40 08:41:13 Set A/D encoding result=40 08:41:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:13 Set channel filter=0.000000e+000 result=40 08:41:13 Config A/D Result=40 08:41:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:13 Get A/D filter: -9.255963e+061 result=40 08:41:13 Get A/D value=-858993460 result=40 08:41:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:41:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:41:13 Aux= 08:41:13 Message to Camera, serial 100285 queued 08:41:50 Received message from Master: op=PointingHead serial=100298 08:41:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:41:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:41:50 Point started: ret=0 08:41:50 point_skyscan result=0 08:41:51 Check angles 08:41:51 SkyScan query 08:41:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 08:41:52 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 08:41:52 Check angles 08:41:52 SkyScan query 08:41:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.655<-14977 Statuses=0008 0009 08:41:52 Msec=750 True Az=112.995 Ze=-44.655 Az status=0008 Ze status=0009 08:41:53 Check angles 08:41:53 SkyScan query 08:41:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.58<-16372 Statuses=0008 0009 08:41:53 Msec=1500 True Az=112.995 Ze=-65.58 Az status=0008 Ze status=0009 08:41:53 Check angles 08:41:53 SkyScan query 08:41:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.535<-17769 Statuses=0008 0009 08:41:54 Msec=2250 True Az=112.995 Ze=-86.535 Az status=0008 Ze status=0009 08:41:54 Check angles 08:41:54 SkyScan query 08:41:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.505<-19167 Statuses=0008 0009 08:41:55 Msec=3000 True Az=112.995 Ze=-107.505 Az status=0008 Ze status=0009 08:41:55 Check angles 08:41:55 SkyScan query 08:41:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.43<-20562 Statuses=0008 0009 08:41:55 Msec=3750 True Az=112.995 Ze=-128.43 Az status=0008 Ze status=0009 08:41:56 Check angles 08:41:56 SkyScan query 08:41:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.88<-21992 Statuses=0008 0009 08:41:56 Msec=4500 True Az=112.995 Ze=-149.88 Az status=0008 Ze status=0009 08:41:56 Check angles 08:41:56 SkyScan query 08:41:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.76<-23384 Statuses=0008 0009 08:41:57 Msec=5250 True Az=112.995 Ze=-170.76 Az status=0008 Ze status=0009 08:41:57 Check angles 08:41:57 SkyScan query 08:41:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:41:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:41:58 Message to Master queued w/err=0: serial=100298 error=0 08:42:03 Received message from Master: op=Filter serial=100299 08:42:03 Color wheel filter change from 0 to 0 08:42:03 FLIGetFilterPos err=0 currentPosition=0 08:42:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:03 Filter is already there-color wheel unchanged 08:42:03 Received message from Master: op=Shutter serial=100300 08:42:03 Shutter LASER open 08:42:03 Received message from Camera: op=State serial=100302 08:42:03 GetSingleValue result=40 Value=cccccccc 08:42:03 SkyScan query 08:42:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:42:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:04 Parameters OK 08:42:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:04 Set A/D data flow result=40 08:42:04 Set A/D channel type result=40 08:42:04 Set A/D encoding result=40 08:42:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:04 Set channel filter=0.000000e+000 result=40 08:42:04 Config A/D Result=40 08:42:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:04 Get A/D filter: -9.255963e+061 result=40 08:42:04 Get A/D value=-858993460 result=40 08:42:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:04 Parameters OK 08:42:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:04 Set A/D data flow result=40 08:42:04 Set A/D channel type result=40 08:42:04 Set A/D encoding result=40 08:42:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:04 Set channel filter=0.000000e+000 result=40 08:42:04 Config A/D Result=40 08:42:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:04 Get A/D filter: -9.255963e+061 result=40 08:42:04 Get A/D value=-858993460 result=40 08:42:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:04 Aux= 08:42:04 Message to Camera, serial 100302 queued 08:42:12 Received message from Master: op=Shutter serial=100312 08:42:12 Shutter LASER close 08:42:13 Received message from Master: op=PointingHead serial=100316 08:42:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:42:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:42:13 Point started: ret=0 08:42:13 point_skyscan result=0 08:42:14 Check angles 08:42:14 SkyScan query 08:42:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.025<-21535 Statuses=0008 0009 08:42:14 Msec=0 True Az=112.995 Ze=-143.025 Az status=0008 Ze status=0009 08:42:14 Check angles 08:42:14 SkyScan query 08:42:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 08:42:15 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 08:42:15 Check angles 08:42:15 SkyScan query 08:42:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 08:42:16 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 08:42:16 Check angles 08:42:16 SkyScan query 08:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.16<-17344 Statuses=0008 0009 08:42:17 Msec=2250 True Az=112.995 Ze=-80.16 Az status=0008 Ze status=0009 08:42:17 Check angles 08:42:17 SkyScan query 08:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 08:42:17 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 08:42:17 Check angles 08:42:17 SkyScan query 08:42:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.22<-14548 Statuses=0008 0009 08:42:18 Msec=3750 True Az=112.995 Ze=-38.22 Az status=0008 Ze status=0009 08:42:18 Check angles 08:42:18 SkyScan query 08:42:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.295<-13153 Statuses=0008 0009 08:42:19 Msec=4500 True Az=112.995 Ze=-17.295 Az status=0008 Ze status=0009 08:42:19 Check angles 08:42:19 SkyScan query 08:42:20 SkyScan query done: ret=0 az=112.995<-7533 ze=3.705<-11753 Statuses=0008 0009 08:42:20 Msec=5250 True Az=112.995 Ze=3.705 Az status=0008 Ze status=0009 08:42:20 Check angles 08:42:20 SkyScan query 08:42:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:42:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:42:20 Message to Master queued w/err=0: serial=100316 error=0 08:42:25 Received message from Master: op=Filter serial=100317 08:42:25 Color wheel filter change from 0 to 0 08:42:25 FLIGetFilterPos err=0 currentPosition=0 08:42:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:25 Filter is already there-color wheel unchanged 08:42:25 Received message from Master: op=Shutter serial=100318 08:42:25 Shutter LASER close 08:42:26 Received message from Camera: op=State serial=100320 08:42:26 GetSingleValue result=40 Value=cccccccc 08:42:26 SkyScan query 08:42:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:42:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:26 Parameters OK 08:42:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:26 Set A/D data flow result=40 08:42:26 Set A/D channel type result=40 08:42:26 Set A/D encoding result=40 08:42:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:26 Set channel filter=0.000000e+000 result=40 08:42:26 Config A/D Result=40 08:42:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:26 Get A/D filter: -9.255963e+061 result=40 08:42:26 Get A/D value=-858993460 result=40 08:42:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:26 Parameters OK 08:42:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:26 Set A/D data flow result=40 08:42:26 Set A/D channel type result=40 08:42:26 Set A/D encoding result=40 08:42:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:26 Set channel filter=0.000000e+000 result=40 08:42:26 Config A/D Result=40 08:42:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:26 Get A/D filter: -9.255963e+061 result=40 08:42:26 Get A/D value=-858993460 result=40 08:42:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:26 Aux= 08:42:26 Message to Camera, serial 100320 queued 08:43:03 Received message from Master: op=PointingHead serial=100333 08:43:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:43:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:43:03 Point started: ret=0 08:43:03 point_skyscan result=0 08:43:04 Check angles 08:43:04 SkyScan query 08:43:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:43:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:43:05 Message to Master queued w/err=0: serial=100333 error=0 08:43:10 Received message from Master: op=Filter serial=100334 08:43:10 Color wheel filter change from 0 to 0 08:43:10 FLIGetFilterPos err=0 currentPosition=0 08:43:10 FLIGetStepsRemaining err=0 RemainingSteps=0 08:43:10 Filter is already there-color wheel unchanged 08:43:10 Received message from Master: op=Shutter serial=100335 08:43:10 Shutter LASER close 08:43:10 Received message from Camera: op=State serial=100337 08:43:10 GetSingleValue result=40 Value=cccccccc 08:43:10 SkyScan query 08:43:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:43:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:11 Parameters OK 08:43:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:11 Set A/D data flow result=40 08:43:11 Set A/D channel type result=40 08:43:11 Set A/D encoding result=40 08:43:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:11 Set channel filter=0.000000e+000 result=40 08:43:11 Config A/D Result=40 08:43:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:11 Get A/D filter: -9.255963e+061 result=40 08:43:11 Get A/D value=-858993460 result=40 08:43:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:11 Parameters OK 08:43:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:11 Set A/D data flow result=40 08:43:11 Set A/D channel type result=40 08:43:11 Set A/D encoding result=40 08:43:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:11 Set channel filter=0.000000e+000 result=40 08:43:11 Config A/D Result=40 08:43:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:11 Get A/D filter: -9.255963e+061 result=40 08:43:11 Get A/D value=-858993460 result=40 08:43:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:43:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:43:11 Aux= 08:43:11 Message to Camera, serial 100337 queued 08:43:47 Received message from Master: op=PointingHead serial=100350 08:43:47 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:43:47 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:43:48 Point started: ret=0 08:43:48 point_skyscan result=0 08:43:48 Check angles 08:43:48 SkyScan query 08:43:49 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 08:43:49 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 08:43:49 Check angles 08:43:49 SkyScan query 08:43:50 SkyScan query done: ret=0 az=153.675<-10245 ze=-6.495<-12433 Statuses=0009 0008 08:43:50 Msec=750 True Az=153.675 Ze=-6.495 Az status=0009 Ze status=0008 [UTC 2019-3-4 08:43:50] 08:43:50 Check angles 08:43:50 SkyScan query 08:43:51 SkyScan query done: ret=0 az=171.195<-11413 ze=-6.495<-12433 Statuses=0009 0008 08:43:51 Msec=1500 True Az=171.195 Ze=-6.495 Az status=0009 Ze status=0008 08:43:51 Check angles 08:43:51 SkyScan query 08:43:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:43:51 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:43:51 Message to Master queued w/err=0: serial=100350 error=0 08:43:56 Received message from Master: op=Filter serial=100351 08:43:56 Color wheel filter change from 0 to 0 08:43:56 FLIGetFilterPos err=0 currentPosition=0 08:43:56 FLIGetStepsRemaining err=0 RemainingSteps=0 08:43:56 Filter is already there-color wheel unchanged 08:43:57 Received message from Master: op=Shutter serial=100352 08:43:57 Shutter LASER close 08:43:57 Received message from Camera: op=State serial=100354 08:43:57 GetSingleValue result=40 Value=cccccccc 08:43:57 SkyScan query 08:43:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:43:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:57 Parameters OK 08:43:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:57 Set A/D data flow result=40 08:43:57 Set A/D channel type result=40 08:43:57 Set A/D encoding result=40 08:43:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:57 Set channel filter=0.000000e+000 result=40 08:43:57 Config A/D Result=40 08:43:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:57 Get A/D filter: -9.255963e+061 result=40 08:43:57 Get A/D value=-858993460 result=40 08:43:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:57 Parameters OK 08:43:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:57 Set A/D data flow result=40 08:43:57 Set A/D channel type result=40 08:43:57 Set A/D encoding result=40 08:43:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:57 Set channel filter=0.000000e+000 result=40 08:43:57 Config A/D Result=40 08:43:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:57 Get A/D filter: -9.255963e+061 result=40 08:43:57 Get A/D value=-858993460 result=40 08:43:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:43:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:43:57 Aux= 08:43:57 Message to Camera, serial 100354 queued 08:44:34 Received message from Master: op=PointingHead serial=100367 08:44:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:44:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:44:34 Point started: ret=0 08:44:34 point_skyscan result=0 08:44:35 Check angles 08:44:35 SkyScan query 08:44:36 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 08:44:36 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 08:44:36 Check angles 08:44:36 SkyScan query 08:44:36 SkyScan query done: ret=0 az=135.03<-9002 ze=6.495<-11567 Statuses=0009 0008 08:44:36 Msec=750 True Az=135.03 Ze=6.495 Az status=0009 Ze status=0008 08:44:37 Check angles 08:44:37 SkyScan query 08:44:37 SkyScan query done: ret=0 az=117.585<-7839 ze=6.495<-11567 Statuses=0009 0008 08:44:37 Msec=1500 True Az=117.585 Ze=6.495 Az status=0009 Ze status=0008 08:44:37 Check angles 08:44:37 SkyScan query 08:44:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:44:38 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:44:38 Message to Master queued w/err=0: serial=100367 error=0 08:44:43 Received message from Master: op=Filter serial=100368 08:44:43 Color wheel filter change from 0 to 0 08:44:43 FLIGetFilterPos err=0 currentPosition=0 08:44:43 FLIGetStepsRemaining err=0 RemainingSteps=0 08:44:43 Filter is already there-color wheel unchanged 08:44:43 Received message from Master: op=Shutter serial=100369 08:44:43 Shutter LASER close 08:44:43 Received message from Camera: op=State serial=100371 08:44:43 GetSingleValue result=40 Value=cccccccc 08:44:43 SkyScan query 08:44:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:44:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:44 Parameters OK 08:44:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:44 Set A/D data flow result=40 08:44:44 Set A/D channel type result=40 08:44:44 Set A/D encoding result=40 08:44:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:44 Set channel filter=0.000000e+000 result=40 08:44:44 Config A/D Result=40 08:44:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:44 Get A/D filter: -9.255963e+061 result=40 08:44:44 Get A/D value=-858993460 result=40 08:44:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:44 Parameters OK 08:44:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:44 Set A/D data flow result=40 08:44:44 Set A/D channel type result=40 08:44:44 Set A/D encoding result=40 08:44:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:44 Set channel filter=0.000000e+000 result=40 08:44:44 Config A/D Result=40 08:44:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:44 Get A/D filter: -9.255963e+061 result=40 08:44:44 Get A/D value=-858993460 result=40 08:44:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:44:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:44:44 Aux= 08:44:44 Message to Camera, serial 100371 queued 08:45:21 Received message from Master: op=PointingHead serial=100384 08:45:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:45:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:45:21 Point started: ret=0 08:45:21 point_skyscan result=0 08:45:22 Check angles 08:45:22 SkyScan query 08:45:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 08:45:22 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 08:45:22 Check angles 08:45:22 SkyScan query 08:45:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 08:45:23 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 08:45:23 Check angles 08:45:23 SkyScan query 08:45:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.055<-16337 Statuses=0008 0009 08:45:24 Msec=1500 True Az=112.995 Ze=-65.055 Az status=0008 Ze status=0009 08:45:24 Check angles 08:45:24 SkyScan query 08:45:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.01<-17734 Statuses=0008 0009 08:45:24 Msec=2250 True Az=112.995 Ze=-86.01 Az status=0008 Ze status=0009 08:45:25 Check angles 08:45:25 SkyScan query 08:45:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.935<-19129 Statuses=0008 0009 08:45:25 Msec=3000 True Az=112.995 Ze=-106.935 Az status=0008 Ze status=0009 08:45:25 Check angles 08:45:25 SkyScan query 08:45:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.89<-20526 Statuses=0008 0009 08:45:26 Msec=3750 True Az=112.995 Ze=-127.89 Az status=0008 Ze status=0009 08:45:26 Check angles 08:45:26 SkyScan query 08:45:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.815<-21921 Statuses=0008 0009 08:45:27 Msec=4500 True Az=112.995 Ze=-148.815 Az status=0008 Ze status=0009 08:45:27 Check angles 08:45:27 SkyScan query 08:45:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.77<-23318 Statuses=0008 0009 08:45:27 Msec=5250 True Az=112.995 Ze=-169.77 Az status=0008 Ze status=0009 08:45:28 Check angles 08:45:28 SkyScan query 08:45:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:45:28 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:45:28 Message to Master queued w/err=0: serial=100384 error=0 08:45:33 Received message from Master: op=Filter serial=100385 08:45:33 Color wheel filter change from 0 to 0 08:45:33 FLIGetFilterPos err=0 currentPosition=0 08:45:33 FLIGetStepsRemaining err=0 RemainingSteps=0 08:45:33 Filter is already there-color wheel unchanged 08:45:33 Received message from Master: op=Shutter serial=100386 08:45:33 Shutter LASER open 08:45:34 Received message from Camera: op=State serial=100388 08:45:34 GetSingleValue result=40 Value=cccccccc 08:45:34 SkyScan query 08:45:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:45:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:34 Parameters OK 08:45:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:34 Set A/D data flow result=40 08:45:34 Set A/D channel type result=40 08:45:34 Set A/D encoding result=40 08:45:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:34 Set channel filter=0.000000e+000 result=40 08:45:34 Config A/D Result=40 08:45:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:34 Get A/D filter: -9.255963e+061 result=40 08:45:34 Get A/D value=-858993460 result=40 08:45:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:34 Parameters OK 08:45:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:34 Set A/D data flow result=40 08:45:34 Set A/D channel type result=40 08:45:34 Set A/D encoding result=40 08:45:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:34 Set channel filter=0.000000e+000 result=40 08:45:34 Config A/D Result=40 08:45:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:34 Get A/D filter: -9.255963e+061 result=40 08:45:34 Get A/D value=-858993460 result=40 08:45:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:45:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:45:34 Aux= 08:45:34 Message to Camera, serial 100388 queued 08:45:43 Received message from Master: op=Shutter serial=100398 08:45:43 Shutter LASER close 08:45:43 Received message from Master: op=PointingHead serial=100402 08:45:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:45:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:45:43 Point started: ret=0 08:45:43 point_skyscan result=0 08:45:44 Check angles 08:45:44 SkyScan query 08:45:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 08:45:45 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 08:45:45 Check angles 08:45:45 SkyScan query 08:45:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.815<-20121 Statuses=0008 0009 08:45:45 Msec=750 True Az=112.995 Ze=-121.815 Az status=0008 Ze status=0009 08:45:46 Check angles 08:45:46 SkyScan query 08:45:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.44<-18696 Statuses=0008 0009 08:45:46 Msec=1500 True Az=112.995 Ze=-100.44 Az status=0008 Ze status=0009 08:45:46 Check angles 08:45:46 SkyScan query 08:45:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.455<-17297 Statuses=0008 0009 08:45:47 Msec=2250 True Az=112.995 Ze=-79.455 Az status=0008 Ze status=0009 08:45:47 Check angles 08:45:47 SkyScan query 08:45:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.515<-15901 Statuses=0008 0009 08:45:48 Msec=3000 True Az=112.995 Ze=-58.515 Az status=0008 Ze status=0009 08:45:48 Check angles 08:45:48 SkyScan query 08:45:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.185<-14479 Statuses=0008 0009 08:45:48 Msec=3750 True Az=112.995 Ze=-37.185 Az status=0008 Ze status=0009 08:45:49 Check angles 08:45:49 SkyScan query 08:45:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.185<-13079 Statuses=0008 0009 08:45:49 Msec=4500 True Az=112.995 Ze=-16.185 Az status=0008 Ze status=0009 08:45:49 Check angles 08:45:49 SkyScan query 08:45:50 SkyScan query done: ret=0 az=112.995<-7533 ze=4.59<-11694 Statuses=0008 0009 08:45:50 Msec=5250 True Az=112.995 Ze=4.59 Az status=0008 Ze status=0009 08:45:50 Check angles 08:45:50 SkyScan query 08:45:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:45:51 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:45:51 Message to Master queued w/err=0: serial=100402 error=0 08:45:56 Received message from Master: op=Filter serial=100403 08:45:56 Color wheel filter change from 0 to 0 08:45:56 FLIGetFilterPos err=0 currentPosition=0 08:45:56 FLIGetStepsRemaining err=0 RemainingSteps=0 08:45:56 Filter is already there-color wheel unchanged 08:45:56 Received message from Master: op=Shutter serial=100404 08:45:56 Shutter LASER close 08:45:56 Received message from Camera: op=State serial=100406 08:45:56 GetSingleValue result=40 Value=cccccccc 08:45:56 SkyScan query 08:45:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:45:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:57 Parameters OK 08:45:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:57 Set A/D data flow result=40 08:45:57 Set A/D channel type result=40 08:45:57 Set A/D encoding result=40 08:45:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:57 Set channel filter=0.000000e+000 result=40 08:45:57 Config A/D Result=40 08:45:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:57 Get A/D filter: -9.255963e+061 result=40 08:45:57 Get A/D value=-858993460 result=40 08:45:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:57 Parameters OK 08:45:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:57 Set A/D data flow result=40 08:45:57 Set A/D channel type result=40 08:45:57 Set A/D encoding result=40 08:45:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:57 Set channel filter=0.000000e+000 result=40 08:45:57 Config A/D Result=40 08:45:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:57 Get A/D filter: -9.255963e+061 result=40 08:45:57 Get A/D value=-858993460 result=40 08:45:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:45:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:45:57 Aux= 08:45:57 Message to Camera, serial 100406 queued 08:46:33 Received message from Master: op=PointingHead serial=100419 08:46:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:46:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:46:34 Point started: ret=0 08:46:34 point_skyscan result=0 08:46:35 Check angles 08:46:35 SkyScan query 08:46:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:46:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:46:35 Message to Master queued w/err=0: serial=100419 error=0 08:46:40 Received message from Master: op=Filter serial=100420 08:46:40 Color wheel filter change from 0 to 0 08:46:40 FLIGetFilterPos err=0 currentPosition=0 08:46:40 FLIGetStepsRemaining err=0 RemainingSteps=0 08:46:40 Filter is already there-color wheel unchanged 08:46:40 Received message from Master: op=Shutter serial=100421 08:46:40 Shutter LASER close 08:46:40 Received message from Camera: op=State serial=100423 08:46:40 GetSingleValue result=40 Value=cccccccc 08:46:40 SkyScan query 08:46:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:46:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:41 Parameters OK 08:46:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:41 Set A/D data flow result=40 08:46:41 Set A/D channel type result=40 08:46:41 Set A/D encoding result=40 08:46:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:41 Set channel filter=0.000000e+000 result=40 08:46:41 Config A/D Result=40 08:46:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:41 Get A/D filter: -9.255963e+061 result=40 08:46:41 Get A/D value=-858993460 result=40 08:46:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:41 Parameters OK 08:46:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:41 Set A/D data flow result=40 08:46:41 Set A/D channel type result=40 08:46:41 Set A/D encoding result=40 08:46:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:41 Set channel filter=0.000000e+000 result=40 08:46:41 Config A/D Result=40 08:46:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:41 Get A/D filter: -9.255963e+061 result=40 08:46:41 Get A/D value=-858993460 result=40 08:46:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:46:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:46:41 Aux= 08:46:41 Message to Camera, serial 100423 queued 08:47:18 Received message from Master: op=PointingHead serial=100436 08:47:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:47:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:47:18 Point started: ret=0 08:47:18 point_skyscan result=0 08:47:19 Check angles 08:47:19 SkyScan query 08:47:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:47:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:47:19 Message to Master queued w/err=0: serial=100436 error=0 08:47:24 Received message from Master: op=Filter serial=100437 08:47:24 Color wheel filter change from 0 to 0 08:47:24 FLIGetFilterPos err=0 currentPosition=0 08:47:24 FLIGetStepsRemaining err=0 RemainingSteps=0 08:47:24 Filter is already there-color wheel unchanged 08:47:25 Received message from Master: op=Shutter serial=100438 08:47:25 Shutter LASER close 08:47:25 Received message from Camera: op=State serial=100440 08:47:25 GetSingleValue result=40 Value=cccccccc 08:47:25 SkyScan query 08:47:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:47:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:25 Parameters OK 08:47:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:25 Set A/D data flow result=40 08:47:25 Set A/D channel type result=40 08:47:25 Set A/D encoding result=40 08:47:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:25 Set channel filter=0.000000e+000 result=40 08:47:25 Config A/D Result=40 08:47:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:25 Get A/D filter: -9.255963e+061 result=40 08:47:25 Get A/D value=-858993460 result=40 08:47:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:25 Parameters OK 08:47:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:25 Set A/D data flow result=40 08:47:25 Set A/D channel type result=40 08:47:25 Set A/D encoding result=40 08:47:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:25 Set channel filter=0.000000e+000 result=40 08:47:25 Config A/D Result=40 08:47:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:25 Get A/D filter: -9.255963e+061 result=40 08:47:25 Get A/D value=-858993460 result=40 08:47:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:47:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:47:25 Aux= 08:47:25 Message to Camera, serial 100440 queued 08:48:02 Received message from Master: op=PointingHead serial=100453 08:48:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:48:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:48:02 Point started: ret=0 08:48:02 point_skyscan result=0 08:48:03 Check angles 08:48:03 SkyScan query 08:48:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:48:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:48:04 Message to Master queued w/err=0: serial=100453 error=0 08:48:09 Received message from Master: op=Filter serial=100454 08:48:09 Color wheel filter change from 0 to 0 08:48:09 FLIGetFilterPos err=0 currentPosition=0 08:48:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:48:09 Filter is already there-color wheel unchanged 08:48:09 Received message from Master: op=Shutter serial=100455 08:48:09 Shutter LASER close 08:48:09 Received message from Camera: op=State serial=100457 08:48:09 GetSingleValue result=40 Value=cccccccc 08:48:09 SkyScan query 08:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:48:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:09 Parameters OK 08:48:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:09 Set A/D data flow result=40 08:48:09 Set A/D channel type result=40 08:48:09 Set A/D encoding result=40 08:48:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:09 Set channel filter=0.000000e+000 result=40 08:48:09 Config A/D Result=40 08:48:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:09 Get A/D filter: -9.255963e+061 result=40 08:48:09 Get A/D value=-858993460 result=40 08:48:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:09 Parameters OK 08:48:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:09 Set A/D data flow result=40 08:48:09 Set A/D channel type result=40 08:48:09 Set A/D encoding result=40 08:48:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:09 Set channel filter=0.000000e+000 result=40 08:48:09 Config A/D Result=40 08:48:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:09 Get A/D filter: -9.255963e+061 result=40 08:48:09 Get A/D value=-858993460 result=40 08:48:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:48:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:48:09 Aux= 08:48:09 Message to Camera, serial 100457 queued 08:48:46 Received message from Master: op=PointingHead serial=100470 08:48:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:48:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:48:47 Point started: ret=0 08:48:47 point_skyscan result=0 08:48:47 Check angles 08:48:47 SkyScan query 08:48:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 08:48:48 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 08:48:48 Check angles 08:48:48 SkyScan query 08:48:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.715<-14981 Statuses=0008 0009 08:48:49 Msec=750 True Az=112.995 Ze=-44.715 Az status=0008 Ze status=0009 08:48:49 Check angles 08:48:49 SkyScan query 08:48:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.655<-16377 Statuses=0008 0009 08:48:49 Msec=1500 True Az=112.995 Ze=-65.655 Az status=0008 Ze status=0009 08:48:50 Check angles 08:48:50 SkyScan query 08:48:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.595<-17773 Statuses=0008 0009 08:48:50 Msec=2250 True Az=112.995 Ze=-86.595 Az status=0008 Ze status=0009 08:48:50 Check angles 08:48:50 SkyScan query 08:48:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.015<-19201 Statuses=0008 0009 08:48:51 Msec=3000 True Az=112.995 Ze=-108.015 Az status=0008 Ze status=0009 08:48:51 Check angles 08:48:51 SkyScan query 08:48:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.42<-20628 Statuses=0008 0009 08:48:52 Msec=3750 True Az=112.995 Ze=-129.42 Az status=0008 Ze status=0009 08:48:52 Check angles 08:48:52 SkyScan query 08:48:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.36<-22024 Statuses=0008 0009 08:48:53 Msec=4500 True Az=112.995 Ze=-150.36 Az status=0008 Ze status=0009 08:48:53 Check angles 08:48:53 SkyScan query 08:48:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 08:48:53 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 08:48:53 Check angles 08:48:53 SkyScan query 08:48:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:48:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:48:54 Message to Master queued w/err=0: serial=100470 error=0 08:48:59 Received message from Master: op=Filter serial=100471 08:48:59 Color wheel filter change from 0 to 0 08:48:59 FLIGetFilterPos err=0 currentPosition=0 08:48:59 FLIGetStepsRemaining err=0 RemainingSteps=0 08:48:59 Filter is already there-color wheel unchanged 08:48:59 Received message from Master: op=Shutter serial=100472 08:48:59 Shutter LASER open 08:48:59 Received message from Camera: op=State serial=100474 08:48:59 GetSingleValue result=40 Value=cccccccc 08:48:59 SkyScan query 08:49:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:49:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:00 Parameters OK 08:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:00 Set A/D data flow result=40 08:49:00 Set A/D channel type result=40 08:49:00 Set A/D encoding result=40 08:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:00 Set channel filter=0.000000e+000 result=40 08:49:00 Config A/D Result=40 08:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:00 Get A/D filter: -9.255963e+061 result=40 08:49:00 Get A/D value=-858993460 result=40 08:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:00 Parameters OK 08:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:00 Set A/D data flow result=40 08:49:00 Set A/D channel type result=40 08:49:00 Set A/D encoding result=40 08:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:00 Set channel filter=0.000000e+000 result=40 08:49:00 Config A/D Result=40 08:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:00 Get A/D filter: -9.255963e+061 result=40 08:49:00 Get A/D value=-858993460 result=40 08:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:00 Aux= 08:49:00 Message to Camera, serial 100474 queued 08:49:08 Received message from Master: op=Shutter serial=100484 08:49:08 Shutter LASER close 08:49:09 Received message from Master: op=PointingHead serial=100488 08:49:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:49:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:49:09 Point started: ret=0 08:49:09 point_skyscan result=0 08:49:10 Check angles 08:49:10 SkyScan query 08:49:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 08:49:11 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 08:49:11 Check angles 08:49:11 SkyScan query 08:49:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.8<-20120 Statuses=0008 0009 08:49:11 Msec=750 True Az=112.995 Ze=-121.8 Az status=0008 Ze status=0009 08:49:12 Check angles 08:49:12 SkyScan query 08:49:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 08:49:12 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 08:49:12 Check angles 08:49:12 SkyScan query 08:49:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.935<-17329 Statuses=0008 0009 08:49:13 Msec=2250 True Az=112.995 Ze=-79.935 Az status=0008 Ze status=0009 08:49:13 Check angles 08:49:13 SkyScan query 08:49:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.995<-15933 Statuses=0008 0009 08:49:14 Msec=3000 True Az=112.995 Ze=-58.995 Az status=0008 Ze status=0009 08:49:14 Check angles 08:49:14 SkyScan query 08:49:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.995<-14533 Statuses=0008 0009 08:49:14 Msec=3750 True Az=112.995 Ze=-37.995 Az status=0008 Ze status=0009 08:49:15 Check angles 08:49:15 SkyScan query 08:49:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.07<-13138 Statuses=0008 0009 08:49:15 Msec=4500 True Az=112.995 Ze=-17.07 Az status=0008 Ze status=0009 08:49:15 Check angles 08:49:15 SkyScan query 08:49:16 SkyScan query done: ret=0 az=112.995<-7533 ze=3.915<-11739 Statuses=0008 0009 08:49:16 Msec=5250 True Az=112.995 Ze=3.915 Az status=0008 Ze status=0009 08:49:16 Check angles 08:49:16 SkyScan query 08:49:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:49:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:49:17 Message to Master queued w/err=0: serial=100488 error=0 08:49:22 Received message from Master: op=Filter serial=100489 08:49:22 Color wheel filter change from 0 to 0 08:49:22 FLIGetFilterPos err=0 currentPosition=0 08:49:22 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:22 Filter is already there-color wheel unchanged 08:49:22 Received message from Master: op=Shutter serial=100490 08:49:22 Shutter LASER close 08:49:22 Received message from Camera: op=State serial=100492 08:49:22 GetSingleValue result=40 Value=cccccccc 08:49:22 SkyScan query 08:49:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:49:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:23 Parameters OK 08:49:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:23 Set A/D data flow result=40 08:49:23 Set A/D channel type result=40 08:49:23 Set A/D encoding result=40 08:49:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:23 Set channel filter=0.000000e+000 result=40 08:49:23 Config A/D Result=40 08:49:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:23 Get A/D filter: -9.255963e+061 result=40 08:49:23 Get A/D value=-858993460 result=40 08:49:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:23 Parameters OK 08:49:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:23 Set A/D data flow result=40 08:49:23 Set A/D channel type result=40 08:49:23 Set A/D encoding result=40 08:49:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:23 Set channel filter=0.000000e+000 result=40 08:49:23 Config A/D Result=40 08:49:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:23 Get A/D filter: -9.255963e+061 result=40 08:49:23 Get A/D value=-858993460 result=40 08:49:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:23 Aux= 08:49:23 Message to Camera, serial 100492 queued 08:49:59 Received message from Master: op=PointingHead serial=100505 08:49:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:49:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:50:00 Point started: ret=0 08:50:00 point_skyscan result=0 08:50:01 Check angles 08:50:01 SkyScan query 08:50:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:50:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:50:01 Message to Master queued w/err=0: serial=100505 error=0 08:50:06 Received message from Master: op=Filter serial=100506 08:50:06 Color wheel filter change from 0 to 0 08:50:06 FLIGetFilterPos err=0 currentPosition=0 08:50:06 FLIGetStepsRemaining err=0 RemainingSteps=0 08:50:06 Filter is already there-color wheel unchanged 08:50:06 Received message from Master: op=Shutter serial=100507 08:50:06 Shutter LASER close 08:50:06 Received message from Camera: op=State serial=100509 08:50:06 GetSingleValue result=40 Value=cccccccc 08:50:06 SkyScan query 08:50:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:50:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:07 Parameters OK 08:50:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:07 Set A/D data flow result=40 08:50:07 Set A/D channel type result=40 08:50:07 Set A/D encoding result=40 08:50:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:07 Set channel filter=0.000000e+000 result=40 08:50:07 Config A/D Result=40 08:50:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:07 Get A/D filter: -9.255963e+061 result=40 08:50:07 Get A/D value=-858993460 result=40 08:50:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:07 Parameters OK 08:50:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:07 Set A/D data flow result=40 08:50:07 Set A/D channel type result=40 08:50:07 Set A/D encoding result=40 08:50:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:07 Set channel filter=0.000000e+000 result=40 08:50:07 Config A/D Result=40 08:50:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:07 Get A/D filter: -9.255963e+061 result=40 08:50:07 Get A/D value=-858993460 result=40 08:50:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:50:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:50:07 Aux= 08:50:07 Message to Camera, serial 100509 queued 08:50:44 Received message from Master: op=PointingHead serial=100522 08:50:44 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:50:44 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:50:44 Point started: ret=0 08:50:44 point_skyscan result=0 08:50:45 Check angles 08:50:45 SkyScan query 08:50:45 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 08:50:45 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 08:50:46 Check angles 08:50:46 SkyScan query 08:50:46 SkyScan query done: ret=0 az=153.48<-10232 ze=-6.495<-12433 Statuses=0009 0008 08:50:46 Msec=750 True Az=153.48 Ze=-6.495 Az status=0009 Ze status=0008 08:50:46 Check angles 08:50:46 SkyScan query 08:50:47 SkyScan query done: ret=0 az=170.94<-11396 ze=-6.495<-12433 Statuses=0009 0008 08:50:47 Msec=1500 True Az=170.94 Ze=-6.495 Az status=0009 Ze status=0008 08:50:47 Check angles 08:50:47 SkyScan query 08:50:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:50:48 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:50:48 Message to Master queued w/err=0: serial=100522 error=0 08:50:53 Received message from Master: op=Filter serial=100523 08:50:53 Color wheel filter change from 0 to 0 08:50:53 FLIGetFilterPos err=0 currentPosition=0 08:50:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:50:53 Filter is already there-color wheel unchanged 08:50:53 Received message from Master: op=Shutter serial=100524 08:50:53 Shutter LASER close 08:50:53 Received message from Camera: op=State serial=100526 08:50:53 GetSingleValue result=40 Value=cccccccc 08:50:53 SkyScan query 08:50:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:50:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:53 Parameters OK 08:50:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:53 Set A/D data flow result=40 08:50:53 Set A/D channel type result=40 08:50:53 Set A/D encoding result=40 08:50:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:53 Set channel filter=0.000000e+000 result=40 08:50:53 Config A/D Result=40 08:50:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:53 Get A/D filter: -9.255963e+061 result=40 08:50:53 Get A/D value=-858993460 result=40 08:50:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:53 Parameters OK 08:50:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:53 Set A/D data flow result=40 08:50:53 Set A/D channel type result=40 08:50:53 Set A/D encoding result=40 08:50:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:53 Set channel filter=0.000000e+000 result=40 08:50:53 Config A/D Result=40 08:50:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:53 Get A/D filter: -9.255963e+061 result=40 08:50:53 Get A/D value=-858993460 result=40 08:50:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:50:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:50:53 Aux= 08:50:53 Message to Camera, serial 100526 queued 08:51:30 Received message from Master: op=PointingHead serial=100539 08:51:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:51:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:51:31 Point started: ret=0 08:51:31 point_skyscan result=0 08:51:31 Check angles 08:51:31 SkyScan query 08:51:32 SkyScan query done: ret=0 az=153.09<-10206 ze=6.51<-11566 Statuses=0009 0008 08:51:32 Msec=0 True Az=153.09 Ze=6.51 Az status=0009 Ze status=0008 08:51:32 Check angles 08:51:32 SkyScan query 08:51:33 SkyScan query done: ret=0 az=135.645<-9043 ze=6.495<-11567 Statuses=0009 0008 08:51:33 Msec=750 True Az=135.645 Ze=6.495 Az status=0009 Ze status=0008 08:51:33 Check angles 08:51:33 SkyScan query 08:51:33 SkyScan query done: ret=0 az=117.735<-7849 ze=6.495<-11567 Statuses=0009 0008 08:51:33 Msec=1500 True Az=117.735 Ze=6.495 Az status=0009 Ze status=0008 08:51:34 Check angles 08:51:34 SkyScan query 08:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:51:34 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:51:34 Message to Master queued w/err=0: serial=100539 error=0 08:51:39 Received message from Master: op=Filter serial=100540 08:51:39 Color wheel filter change from 0 to 0 08:51:39 FLIGetFilterPos err=0 currentPosition=0 08:51:39 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:39 Filter is already there-color wheel unchanged 08:51:39 Received message from Master: op=Shutter serial=100541 08:51:39 Shutter LASER close 08:51:39 Received message from Camera: op=State serial=100543 08:51:39 GetSingleValue result=40 Value=cccccccc 08:51:39 SkyScan query 08:51:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:51:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:40 Parameters OK 08:51:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:40 Set A/D data flow result=40 08:51:40 Set A/D channel type result=40 08:51:40 Set A/D encoding result=40 08:51:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:40 Set channel filter=0.000000e+000 result=40 08:51:40 Config A/D Result=40 08:51:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:40 Get A/D filter: -9.255963e+061 result=40 08:51:40 Get A/D value=-858993460 result=40 08:51:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:40 Parameters OK 08:51:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:40 Set A/D data flow result=40 08:51:40 Set A/D channel type result=40 08:51:40 Set A/D encoding result=40 08:51:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:40 Set channel filter=0.000000e+000 result=40 08:51:40 Config A/D Result=40 08:51:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:40 Get A/D filter: -9.255963e+061 result=40 08:51:40 Get A/D value=-858993460 result=40 08:51:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:40 Aux= 08:51:40 Message to Camera, serial 100543 queued 08:52:16 Received message from Master: op=PointingHead serial=100555 08:52:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:52:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:52:16 Point started: ret=0 08:52:16 point_skyscan result=0 08:52:17 Check angles 08:52:17 SkyScan query 08:52:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 08:52:18 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 08:52:18 Check angles 08:52:18 SkyScan query 08:52:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 08:52:18 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 08:52:19 Check angles 08:52:19 SkyScan query 08:52:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.265<-16351 Statuses=0008 0009 08:52:19 Msec=1500 True Az=112.995 Ze=-65.265 Az status=0008 Ze status=0009 08:52:19 Check angles 08:52:19 SkyScan query 08:52:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.235<-17749 Statuses=0008 0009 08:52:20 Msec=2250 True Az=112.995 Ze=-86.235 Az status=0008 Ze status=0009 08:52:20 Check angles 08:52:20 SkyScan query 08:52:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 08:52:21 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 08:52:21 Check angles 08:52:21 SkyScan query 08:52:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.55<-20570 Statuses=0008 0009 08:52:21 Msec=3750 True Az=112.995 Ze=-128.55 Az status=0008 Ze status=0009 08:52:22 Check angles 08:52:22 SkyScan query 08:52:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.55<-21970 Statuses=0008 0009 08:52:22 Msec=4500 True Az=112.995 Ze=-149.55 Az status=0008 Ze status=0009 08:52:22 Check angles 08:52:22 SkyScan query 08:52:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.85<-23390 Statuses=0008 0009 08:52:23 Msec=5250 True Az=112.995 Ze=-170.85 Az status=0008 Ze status=0009 08:52:23 Check angles 08:52:23 SkyScan query 08:52:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:52:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:52:24 Message to Master queued w/err=0: serial=100555 error=0 08:52:29 Received message from Master: op=Filter serial=100556 08:52:29 Color wheel filter change from 0 to 0 08:52:29 FLIGetFilterPos err=0 currentPosition=0 08:52:29 FLIGetStepsRemaining err=0 RemainingSteps=0 08:52:29 Filter is already there-color wheel unchanged 08:52:29 Received message from Master: op=Shutter serial=100557 08:52:29 Shutter LASER open 08:52:29 Received message from Camera: op=State serial=100559 08:52:29 GetSingleValue result=40 Value=cccccccc 08:52:29 SkyScan query 08:52:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:52:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:30 Parameters OK 08:52:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:30 Set A/D data flow result=40 08:52:30 Set A/D channel type result=40 08:52:30 Set A/D encoding result=40 08:52:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:30 Set channel filter=0.000000e+000 result=40 08:52:30 Config A/D Result=40 08:52:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:30 Get A/D filter: -9.255963e+061 result=40 08:52:30 Get A/D value=-858993460 result=40 08:52:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:30 Parameters OK 08:52:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:30 Set A/D data flow result=40 08:52:30 Set A/D channel type result=40 08:52:30 Set A/D encoding result=40 08:52:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:30 Set channel filter=0.000000e+000 result=40 08:52:30 Config A/D Result=40 08:52:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:30 Get A/D filter: -9.255963e+061 result=40 08:52:30 Get A/D value=-858993460 result=40 08:52:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:52:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:52:30 Aux= 08:52:30 Message to Camera, serial 100559 queued 08:52:38 Received message from Master: op=Shutter serial=100569 08:52:38 Shutter LASER close 08:52:38 Received message from Master: op=PointingHead serial=100573 08:52:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:52:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:52:39 Point started: ret=0 08:52:39 point_skyscan result=0 08:52:40 Check angles 08:52:40 SkyScan query 08:52:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 08:52:40 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 08:52:40 Check angles 08:52:40 SkyScan query 08:52:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.31<-20154 Statuses=0008 0009 08:52:41 Msec=750 True Az=112.995 Ze=-122.31 Az status=0008 Ze status=0009 08:52:41 Check angles 08:52:41 SkyScan query 08:52:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.355<-18757 Statuses=0008 0009 08:52:42 Msec=1500 True Az=112.995 Ze=-101.355 Az status=0008 Ze status=0009 08:52:42 Check angles 08:52:42 SkyScan query 08:52:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.385<-17359 Statuses=0008 0009 08:52:42 Msec=2250 True Az=112.995 Ze=-80.385 Az status=0008 Ze status=0009 08:52:43 Check angles 08:52:43 SkyScan query 08:52:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.995<-15933 Statuses=0008 0009 08:52:43 Msec=3000 True Az=112.995 Ze=-58.995 Az status=0008 Ze status=0009 08:52:43 Check angles 08:52:43 SkyScan query 08:52:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.98<-14532 Statuses=0008 0009 08:52:44 Msec=3750 True Az=112.995 Ze=-37.98 Az status=0008 Ze status=0009 08:52:44 Check angles 08:52:44 SkyScan query 08:52:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.055<-13137 Statuses=0008 0009 08:52:45 Msec=4500 True Az=112.995 Ze=-17.055 Az status=0008 Ze status=0009 08:52:45 Check angles 08:52:45 SkyScan query 08:52:45 SkyScan query done: ret=0 az=112.995<-7533 ze=3.915<-11739 Statuses=0008 0009 08:52:45 Msec=5250 True Az=112.995 Ze=3.915 Az status=0008 Ze status=0009 08:52:46 Check angles 08:52:46 SkyScan query 08:52:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:52:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:52:46 Message to Master queued w/err=0: serial=100573 error=0 08:52:51 Received message from Master: op=Filter serial=100574 08:52:51 Color wheel filter change from 0 to 0 08:52:51 FLIGetFilterPos err=0 currentPosition=0 08:52:51 FLIGetStepsRemaining err=0 RemainingSteps=0 08:52:51 Filter is already there-color wheel unchanged 08:52:51 Received message from Master: op=Shutter serial=100575 08:52:51 Shutter LASER close 08:52:51 Received message from Camera: op=State serial=100577 08:52:51 GetSingleValue result=40 Value=cccccccc 08:52:51 SkyScan query 08:52:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:52:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:52 Parameters OK 08:52:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:52 Set A/D data flow result=40 08:52:52 Set A/D channel type result=40 08:52:52 Set A/D encoding result=40 08:52:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:52 Set channel filter=0.000000e+000 result=40 08:52:52 Config A/D Result=40 08:52:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:52 Get A/D filter: -9.255963e+061 result=40 08:52:52 Get A/D value=-858993460 result=40 08:52:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:52 Parameters OK 08:52:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:52 Set A/D data flow result=40 08:52:52 Set A/D channel type result=40 08:52:52 Set A/D encoding result=40 08:52:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:52 Set channel filter=0.000000e+000 result=40 08:52:52 Config A/D Result=40 08:52:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:52 Get A/D filter: -9.255963e+061 result=40 08:52:52 Get A/D value=-858993460 result=40 08:52:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:52:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:52:52 Aux= 08:52:52 Message to Camera, serial 100577 queued 08:53:29 Received message from Master: op=PointingHead serial=100590 08:53:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:53:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:53:29 Point started: ret=0 08:53:29 point_skyscan result=0 08:53:30 Check angles 08:53:30 SkyScan query 08:53:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:53:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:53:31 Message to Master queued w/err=0: serial=100590 error=0 08:53:36 Received message from Master: op=Filter serial=100591 08:53:36 Color wheel filter change from 0 to 0 08:53:36 FLIGetFilterPos err=0 currentPosition=0 08:53:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:53:36 Filter is already there-color wheel unchanged 08:53:36 Received message from Master: op=Shutter serial=100592 08:53:36 Shutter LASER close 08:53:36 Received message from Camera: op=State serial=100594 08:53:36 GetSingleValue result=40 Value=cccccccc 08:53:36 SkyScan query 08:53:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:53:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:36 Parameters OK 08:53:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:36 Set A/D data flow result=40 08:53:36 Set A/D channel type result=40 08:53:36 Set A/D encoding result=40 08:53:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:36 Set channel filter=0.000000e+000 result=40 08:53:36 Config A/D Result=40 08:53:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:36 Get A/D filter: -9.255963e+061 result=40 08:53:36 Get A/D value=-858993460 result=40 08:53:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:36 Parameters OK 08:53:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:36 Set A/D data flow result=40 08:53:36 Set A/D channel type result=40 08:53:36 Set A/D encoding result=40 08:53:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:36 Set channel filter=0.000000e+000 result=40 08:53:36 Config A/D Result=40 08:53:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:36 Get A/D filter: -9.255963e+061 result=40 08:53:36 Get A/D value=-858993460 result=40 08:53:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:53:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:53:36 Aux= 08:53:36 Message to Camera, serial 100594 queued 08:54:13 Received message from Master: op=PointingHead serial=100607 [UTC 2019-3-4 08:54:13] 08:54:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:54:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:54:14 Point started: ret=0 08:54:14 point_skyscan result=0 08:54:14 Check angles 08:54:14 SkyScan query 08:54:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:54:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:54:15 Message to Master queued w/err=0: serial=100607 error=0 08:54:20 Received message from Master: op=Filter serial=100608 08:54:20 Color wheel filter change from 0 to 0 08:54:20 FLIGetFilterPos err=0 currentPosition=0 08:54:20 FLIGetStepsRemaining err=0 RemainingSteps=0 08:54:20 Filter is already there-color wheel unchanged 08:54:20 Received message from Master: op=Shutter serial=100609 08:54:20 Shutter LASER close 08:54:20 Received message from Camera: op=State serial=100611 08:54:20 GetSingleValue result=40 Value=cccccccc 08:54:20 SkyScan query 08:54:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:54:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:21 Parameters OK 08:54:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:21 Set A/D data flow result=40 08:54:21 Set A/D channel type result=40 08:54:21 Set A/D encoding result=40 08:54:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:21 Set channel filter=0.000000e+000 result=40 08:54:21 Config A/D Result=40 08:54:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:21 Get A/D filter: -9.255963e+061 result=40 08:54:21 Get A/D value=-858993460 result=40 08:54:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:21 Parameters OK 08:54:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:21 Set A/D data flow result=40 08:54:21 Set A/D channel type result=40 08:54:21 Set A/D encoding result=40 08:54:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:21 Set channel filter=0.000000e+000 result=40 08:54:21 Config A/D Result=40 08:54:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:21 Get A/D filter: -9.255963e+061 result=40 08:54:21 Get A/D value=-858993460 result=40 08:54:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:54:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:54:21 Aux= 08:54:21 Message to Camera, serial 100611 queued 08:54:58 Received message from Master: op=PointingHead serial=100624 08:54:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:54:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:54:58 Point started: ret=0 08:54:58 point_skyscan result=0 08:54:59 Check angles 08:54:59 SkyScan query 08:54:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:54:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:54:59 Message to Master queued w/err=0: serial=100624 error=0 08:55:04 Received message from Master: op=Filter serial=100625 08:55:04 Color wheel filter change from 0 to 0 08:55:04 FLIGetFilterPos err=0 currentPosition=0 08:55:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:55:04 Filter is already there-color wheel unchanged 08:55:04 Received message from Master: op=Shutter serial=100626 08:55:04 Shutter LASER close 08:55:04 Received message from Camera: op=State serial=100628 08:55:04 GetSingleValue result=40 Value=cccccccc 08:55:04 SkyScan query 08:55:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:55:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:05 Parameters OK 08:55:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:05 Set A/D data flow result=40 08:55:05 Set A/D channel type result=40 08:55:05 Set A/D encoding result=40 08:55:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:05 Set channel filter=0.000000e+000 result=40 08:55:05 Config A/D Result=40 08:55:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:05 Get A/D filter: -9.255963e+061 result=40 08:55:05 Get A/D value=-858993460 result=40 08:55:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:05 Parameters OK 08:55:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:05 Set A/D data flow result=40 08:55:05 Set A/D channel type result=40 08:55:05 Set A/D encoding result=40 08:55:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:05 Set channel filter=0.000000e+000 result=40 08:55:05 Config A/D Result=40 08:55:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:05 Get A/D filter: -9.255963e+061 result=40 08:55:05 Get A/D value=-858993460 result=40 08:55:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:55:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:55:05 Aux= 08:55:05 Message to Camera, serial 100628 queued 08:55:42 Received message from Master: op=PointingHead serial=100641 08:55:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:55:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:55:42 Point started: ret=0 08:55:42 point_skyscan result=0 08:55:43 Check angles 08:55:43 SkyScan query 08:55:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 08:55:44 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 08:55:44 Check angles 08:55:44 SkyScan query 08:55:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 08:55:44 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 08:55:44 Check angles 08:55:44 SkyScan query 08:55:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.19<-16346 Statuses=0008 0009 08:55:45 Msec=1500 True Az=112.995 Ze=-65.19 Az status=0008 Ze status=0009 08:55:45 Check angles 08:55:45 SkyScan query 08:55:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.145<-17743 Statuses=0008 0009 08:55:46 Msec=2250 True Az=112.995 Ze=-86.145 Az status=0008 Ze status=0009 08:55:46 Check angles 08:55:46 SkyScan query 08:55:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.085<-19139 Statuses=0008 0009 08:55:47 Msec=3000 True Az=112.995 Ze=-107.085 Az status=0008 Ze status=0009 08:55:47 Check angles 08:55:47 SkyScan query 08:55:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.025<-20535 Statuses=0008 0009 08:55:47 Msec=3750 True Az=112.995 Ze=-128.025 Az status=0008 Ze status=0009 08:55:47 Check angles 08:55:47 SkyScan query 08:55:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.98<-21932 Statuses=0008 0009 08:55:48 Msec=4500 True Az=112.995 Ze=-148.98 Az status=0008 Ze status=0009 08:55:48 Check angles 08:55:48 SkyScan query 08:55:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.935<-23329 Statuses=0008 0009 08:55:49 Msec=5250 True Az=112.995 Ze=-169.935 Az status=0008 Ze status=0009 08:55:49 Check angles 08:55:49 SkyScan query 08:55:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:55:50 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:55:50 Message to Master queued w/err=0: serial=100641 error=0 08:55:55 Received message from Master: op=Filter serial=100642 08:55:55 Color wheel filter change from 0 to 0 08:55:55 FLIGetFilterPos err=0 currentPosition=0 08:55:55 FLIGetStepsRemaining err=0 RemainingSteps=0 08:55:55 Filter is already there-color wheel unchanged 08:55:55 Received message from Master: op=Shutter serial=100643 08:55:55 Shutter LASER open 08:55:55 Received message from Camera: op=State serial=100645 08:55:55 GetSingleValue result=40 Value=cccccccc 08:55:55 SkyScan query 08:55:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:55:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:55 Parameters OK 08:55:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:55 Set A/D data flow result=40 08:55:55 Set A/D channel type result=40 08:55:55 Set A/D encoding result=40 08:55:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:55 Set channel filter=0.000000e+000 result=40 08:55:55 Config A/D Result=40 08:55:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:55 Get A/D filter: -9.255963e+061 result=40 08:55:55 Get A/D value=-858993460 result=40 08:55:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:55 Parameters OK 08:55:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:55 Set A/D data flow result=40 08:55:55 Set A/D channel type result=40 08:55:55 Set A/D encoding result=40 08:55:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:55 Set channel filter=0.000000e+000 result=40 08:55:55 Config A/D Result=40 08:55:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:55 Get A/D filter: -9.255963e+061 result=40 08:55:55 Get A/D value=-858993460 result=40 08:55:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:55:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:55:55 Aux= 08:55:55 Message to Camera, serial 100645 queued 08:56:04 Received message from Master: op=Shutter serial=100655 08:56:04 Shutter LASER close 08:56:05 Received message from Master: op=PointingHead serial=100659 08:56:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:56:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:56:05 Point started: ret=0 08:56:05 point_skyscan result=0 08:56:06 Check angles 08:56:06 SkyScan query 08:56:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 08:56:06 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 08:56:06 Check angles 08:56:06 SkyScan query 08:56:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.28<-20152 Statuses=0008 0009 08:56:07 Msec=750 True Az=112.995 Ze=-122.28 Az status=0008 Ze status=0009 08:56:07 Check angles 08:56:07 SkyScan query 08:56:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.325<-18755 Statuses=0008 0009 08:56:08 Msec=1500 True Az=112.995 Ze=-101.325 Az status=0008 Ze status=0009 08:56:08 Check angles 08:56:08 SkyScan query 08:56:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.355<-17357 Statuses=0008 0009 08:56:08 Msec=2250 True Az=112.995 Ze=-80.355 Az status=0008 Ze status=0009 08:56:09 Check angles 08:56:09 SkyScan query 08:56:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.415<-15961 Statuses=0008 0009 08:56:09 Msec=3000 True Az=112.995 Ze=-59.415 Az status=0008 Ze status=0009 08:56:09 Check angles 08:56:09 SkyScan query 08:56:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.43<-14562 Statuses=0008 0009 08:56:10 Msec=3750 True Az=112.995 Ze=-38.43 Az status=0008 Ze status=0009 08:56:10 Check angles 08:56:10 SkyScan query 08:56:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.49<-13166 Statuses=0008 0009 08:56:11 Msec=4500 True Az=112.995 Ze=-17.49 Az status=0008 Ze status=0009 08:56:11 Check angles 08:56:11 SkyScan query 08:56:11 SkyScan query done: ret=0 az=112.995<-7533 ze=3.495<-11767 Statuses=0008 0009 08:56:11 Msec=5250 True Az=112.995 Ze=3.495 Az status=0008 Ze status=0009 08:56:12 Check angles 08:56:12 SkyScan query 08:56:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:56:12 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:56:12 Message to Master queued w/err=0: serial=100659 error=0 08:56:17 Received message from Master: op=Filter serial=100660 08:56:17 Color wheel filter change from 0 to 0 08:56:17 FLIGetFilterPos err=0 currentPosition=0 08:56:17 FLIGetStepsRemaining err=0 RemainingSteps=0 08:56:17 Filter is already there-color wheel unchanged 08:56:17 Received message from Master: op=Shutter serial=100661 08:56:17 Shutter LASER close 08:56:18 Received message from Camera: op=State serial=100663 08:56:18 GetSingleValue result=40 Value=cccccccc 08:56:18 SkyScan query 08:56:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:56:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:18 Parameters OK 08:56:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:18 Set A/D data flow result=40 08:56:18 Set A/D channel type result=40 08:56:18 Set A/D encoding result=40 08:56:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:18 Set channel filter=0.000000e+000 result=40 08:56:18 Config A/D Result=40 08:56:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:18 Get A/D filter: -9.255963e+061 result=40 08:56:18 Get A/D value=-858993460 result=40 08:56:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:18 Parameters OK 08:56:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:18 Set A/D data flow result=40 08:56:18 Set A/D channel type result=40 08:56:18 Set A/D encoding result=40 08:56:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:18 Set channel filter=0.000000e+000 result=40 08:56:18 Config A/D Result=40 08:56:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:18 Get A/D filter: -9.255963e+061 result=40 08:56:18 Get A/D value=-858993460 result=40 08:56:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:56:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:56:18 Aux= 08:56:18 Message to Camera, serial 100663 queued 08:56:55 Received message from Master: op=PointingHead serial=100676 08:56:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:56:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:56:55 Point started: ret=0 08:56:55 point_skyscan result=0 08:56:56 Check angles 08:56:56 SkyScan query 08:56:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:56:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:56:57 Message to Master queued w/err=0: serial=100676 error=0 08:57:02 Received message from Master: op=Filter serial=100677 08:57:02 Color wheel filter change from 0 to 0 08:57:02 FLIGetFilterPos err=0 currentPosition=0 08:57:02 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:02 Filter is already there-color wheel unchanged 08:57:02 Received message from Master: op=Shutter serial=100678 08:57:02 Shutter LASER close 08:57:02 Received message from Camera: op=State serial=100680 08:57:02 GetSingleValue result=40 Value=cccccccc 08:57:02 SkyScan query 08:57:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:57:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:02 Parameters OK 08:57:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:02 Set A/D data flow result=40 08:57:02 Set A/D channel type result=40 08:57:02 Set A/D encoding result=40 08:57:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:02 Set channel filter=0.000000e+000 result=40 08:57:02 Config A/D Result=40 08:57:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:02 Get A/D filter: -9.255963e+061 result=40 08:57:02 Get A/D value=-858993460 result=40 08:57:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:02 Parameters OK 08:57:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:02 Set A/D data flow result=40 08:57:02 Set A/D channel type result=40 08:57:02 Set A/D encoding result=40 08:57:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:02 Set channel filter=0.000000e+000 result=40 08:57:02 Config A/D Result=40 08:57:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:02 Get A/D filter: -9.255963e+061 result=40 08:57:02 Get A/D value=-858993460 result=40 08:57:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:02 Aux= 08:57:02 Message to Camera, serial 100680 queued 08:57:39 Received message from Master: op=PointingHead serial=100693 08:57:39 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:57:39 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:57:40 Point started: ret=0 08:57:40 point_skyscan result=0 08:57:40 Check angles 08:57:40 SkyScan query 08:57:41 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 08:57:41 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 08:57:41 Check angles 08:57:41 SkyScan query 08:57:42 SkyScan query done: ret=0 az=153.795<-10253 ze=-6.51<-12434 Statuses=0009 0008 08:57:42 Msec=750 True Az=153.795 Ze=-6.51 Az status=0009 Ze status=0008 08:57:42 Check angles 08:57:42 SkyScan query 08:57:42 SkyScan query done: ret=0 az=171.21<-11414 ze=-6.495<-12433 Statuses=0009 0008 08:57:42 Msec=1500 True Az=171.21 Ze=-6.495 Az status=0009 Ze status=0008 08:57:43 Check angles 08:57:43 SkyScan query 08:57:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:57:43 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 08:57:43 Message to Master queued w/err=0: serial=100693 error=0 08:57:48 Received message from Master: op=Filter serial=100694 08:57:48 Color wheel filter change from 0 to 0 08:57:48 FLIGetFilterPos err=0 currentPosition=0 08:57:48 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:48 Filter is already there-color wheel unchanged 08:57:48 Received message from Master: op=Shutter serial=100695 08:57:48 Shutter LASER close 08:57:48 Received message from Camera: op=State serial=100697 08:57:48 GetSingleValue result=40 Value=cccccccc 08:57:48 SkyScan query 08:57:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:57:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:49 Parameters OK 08:57:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:49 Set A/D data flow result=40 08:57:49 Set A/D channel type result=40 08:57:49 Set A/D encoding result=40 08:57:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:49 Set channel filter=0.000000e+000 result=40 08:57:49 Config A/D Result=40 08:57:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:49 Get A/D filter: -9.255963e+061 result=40 08:57:49 Get A/D value=-858993460 result=40 08:57:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:49 Parameters OK 08:57:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:49 Set A/D data flow result=40 08:57:49 Set A/D channel type result=40 08:57:49 Set A/D encoding result=40 08:57:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:49 Set channel filter=0.000000e+000 result=40 08:57:49 Config A/D Result=40 08:57:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:49 Get A/D filter: -9.255963e+061 result=40 08:57:49 Get A/D value=-858993460 result=40 08:57:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:49 Aux= 08:57:49 Message to Camera, serial 100697 queued 08:58:25 Received message from Master: op=PointingHead serial=100709 08:58:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:58:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:58:25 Point started: ret=0 08:58:25 point_skyscan result=0 08:58:26 Check angles 08:58:26 SkyScan query 08:58:27 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 08:58:27 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 08:58:27 Check angles 08:58:27 SkyScan query 08:58:27 SkyScan query done: ret=0 az=135.6<-9040 ze=6.495<-11567 Statuses=0009 0008 08:58:27 Msec=750 True Az=135.6 Ze=6.495 Az status=0009 Ze status=0008 08:58:27 Check angles 08:58:27 SkyScan query 08:58:28 SkyScan query done: ret=0 az=118.155<-7877 ze=6.495<-11567 Statuses=0009 0008 08:58:28 Msec=1500 True Az=118.155 Ze=6.495 Az status=0009 Ze status=0008 08:58:28 Check angles 08:58:28 SkyScan query 08:58:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:58:29 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:58:29 Message to Master queued w/err=0: serial=100709 error=0 08:58:34 Received message from Master: op=Filter serial=100710 08:58:34 Color wheel filter change from 0 to 0 08:58:34 FLIGetFilterPos err=0 currentPosition=0 08:58:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:34 Filter is already there-color wheel unchanged 08:58:34 Received message from Master: op=Shutter serial=100711 08:58:34 Shutter LASER close 08:58:34 Received message from Camera: op=State serial=100713 08:58:34 GetSingleValue result=40 Value=cccccccc 08:58:34 SkyScan query 08:58:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:58:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:35 Parameters OK 08:58:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:35 Set A/D data flow result=40 08:58:35 Set A/D channel type result=40 08:58:35 Set A/D encoding result=40 08:58:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:35 Set channel filter=0.000000e+000 result=40 08:58:35 Config A/D Result=40 08:58:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:35 Get A/D filter: -9.255963e+061 result=40 08:58:35 Get A/D value=-858993460 result=40 08:58:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:35 Parameters OK 08:58:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:35 Set A/D data flow result=40 08:58:35 Set A/D channel type result=40 08:58:35 Set A/D encoding result=40 08:58:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:35 Set channel filter=0.000000e+000 result=40 08:58:35 Config A/D Result=40 08:58:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:35 Get A/D filter: -9.255963e+061 result=40 08:58:35 Get A/D value=-858993460 result=40 08:58:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:35 Aux= 08:58:35 Message to Camera, serial 100713 queued 08:59:11 Received message from Master: op=PointingHead serial=100726 08:59:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:59:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:59:12 Point started: ret=0 08:59:12 point_skyscan result=0 08:59:13 Check angles 08:59:13 SkyScan query 08:59:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 08:59:13 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 08:59:13 Check angles 08:59:13 SkyScan query 08:59:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.67<-14978 Statuses=0008 0009 08:59:14 Msec=750 True Az=112.995 Ze=-44.67 Az status=0008 Ze status=0009 08:59:14 Check angles 08:59:14 SkyScan query 08:59:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.09<-16406 Statuses=0008 0009 08:59:15 Msec=1500 True Az=112.995 Ze=-66.09 Az status=0008 Ze status=0009 08:59:15 Check angles 08:59:15 SkyScan query 08:59:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.045<-17803 Statuses=0008 0009 08:59:15 Msec=2250 True Az=112.995 Ze=-87.045 Az status=0008 Ze status=0009 08:59:16 Check angles 08:59:16 SkyScan query 08:59:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.015<-19201 Statuses=0008 0009 08:59:16 Msec=3000 True Az=112.995 Ze=-108.015 Az status=0008 Ze status=0009 08:59:16 Check angles 08:59:16 SkyScan query 08:59:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.405<-20627 Statuses=0008 0009 08:59:17 Msec=3750 True Az=112.995 Ze=-129.405 Az status=0008 Ze status=0009 08:59:17 Check angles 08:59:17 SkyScan query 08:59:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.33<-22022 Statuses=0008 0009 08:59:18 Msec=4500 True Az=112.995 Ze=-150.33 Az status=0008 Ze status=0009 08:59:18 Check angles 08:59:18 SkyScan query 08:59:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.12<-23408 Statuses=0008 0009 08:59:18 Msec=5250 True Az=112.995 Ze=-171.12 Az status=0008 Ze status=0009 08:59:19 Check angles 08:59:19 SkyScan query 08:59:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:59:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:59:19 Message to Master queued w/err=0: serial=100726 error=0 08:59:24 Received message from Master: op=Filter serial=100727 08:59:24 Color wheel filter change from 0 to 0 08:59:24 FLIGetFilterPos err=0 currentPosition=0 08:59:24 FLIGetStepsRemaining err=0 RemainingSteps=0 08:59:24 Filter is already there-color wheel unchanged 08:59:24 Received message from Master: op=Shutter serial=100728 08:59:24 Shutter LASER open 08:59:24 Received message from Camera: op=State serial=100730 08:59:24 GetSingleValue result=40 Value=cccccccc 08:59:24 SkyScan query 08:59:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:59:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:25 Parameters OK 08:59:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:25 Set A/D data flow result=40 08:59:25 Set A/D channel type result=40 08:59:25 Set A/D encoding result=40 08:59:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:25 Set channel filter=0.000000e+000 result=40 08:59:25 Config A/D Result=40 08:59:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:25 Get A/D filter: -9.255963e+061 result=40 08:59:25 Get A/D value=-858993460 result=40 08:59:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:25 Parameters OK 08:59:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:25 Set A/D data flow result=40 08:59:25 Set A/D channel type result=40 08:59:25 Set A/D encoding result=40 08:59:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:25 Set channel filter=0.000000e+000 result=40 08:59:25 Config A/D Result=40 08:59:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:25 Get A/D filter: -9.255963e+061 result=40 08:59:25 Get A/D value=-858993460 result=40 08:59:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:59:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:59:25 Aux= 08:59:25 Message to Camera, serial 100730 queued 08:59:33 Received message from Master: op=Shutter serial=100740 08:59:33 Shutter LASER close 08:59:34 Received message from Master: op=PointingHead serial=100744 08:59:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:59:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:59:34 Point started: ret=0 08:59:34 point_skyscan result=0 08:59:35 Check angles 08:59:35 SkyScan query 08:59:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.905<-21527 Statuses=0008 0009 08:59:36 Msec=0 True Az=112.995 Ze=-142.905 Az status=0008 Ze status=0009 08:59:36 Check angles 08:59:36 SkyScan query 08:59:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.92<-20128 Statuses=0008 0009 08:59:36 Msec=750 True Az=112.995 Ze=-121.92 Az status=0008 Ze status=0009 08:59:37 Check angles 08:59:37 SkyScan query 08:59:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.025<-18735 Statuses=0008 0009 08:59:37 Msec=1500 True Az=112.995 Ze=-101.025 Az status=0008 Ze status=0009 08:59:37 Check angles 08:59:37 SkyScan query 08:59:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.025<-17335 Statuses=0008 0009 08:59:38 Msec=2250 True Az=112.995 Ze=-80.025 Az status=0008 Ze status=0009 08:59:38 Check angles 08:59:38 SkyScan query 08:59:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.085<-15939 Statuses=0008 0009 08:59:39 Msec=3000 True Az=112.995 Ze=-59.085 Az status=0008 Ze status=0009 08:59:39 Check angles 08:59:39 SkyScan query 08:59:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.085<-14539 Statuses=0008 0009 08:59:39 Msec=3750 True Az=112.995 Ze=-38.085 Az status=0008 Ze status=0009 08:59:40 Check angles 08:59:40 SkyScan query 08:59:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.145<-13143 Statuses=0008 0009 08:59:40 Msec=4500 True Az=112.995 Ze=-17.145 Az status=0008 Ze status=0009 08:59:40 Check angles 08:59:40 SkyScan query 08:59:41 SkyScan query done: ret=0 az=112.995<-7533 ze=3.825<-11745 Statuses=0008 0009 08:59:41 Msec=5250 True Az=112.995 Ze=3.825 Az status=0008 Ze status=0009 08:59:41 Check angles 08:59:41 SkyScan query 08:59:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:59:42 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:59:42 Message to Master queued w/err=0: serial=100744 error=0 08:59:47 Received message from Master: op=Filter serial=100745 08:59:47 Color wheel filter change from 0 to 0 08:59:47 FLIGetFilterPos err=0 currentPosition=0 08:59:47 FLIGetStepsRemaining err=0 RemainingSteps=0 08:59:47 Filter is already there-color wheel unchanged 08:59:47 Received message from Master: op=Shutter serial=100746 08:59:47 Shutter LASER close 08:59:47 Received message from Camera: op=State serial=100748 08:59:47 GetSingleValue result=40 Value=cccccccc 08:59:47 SkyScan query 08:59:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:59:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:48 Parameters OK 08:59:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:48 Set A/D data flow result=40 08:59:48 Set A/D channel type result=40 08:59:48 Set A/D encoding result=40 08:59:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:48 Set channel filter=0.000000e+000 result=40 08:59:48 Config A/D Result=40 08:59:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:48 Get A/D filter: -9.255963e+061 result=40 08:59:48 Get A/D value=-858993460 result=40 08:59:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:48 Parameters OK 08:59:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:48 Set A/D data flow result=40 08:59:48 Set A/D channel type result=40 08:59:48 Set A/D encoding result=40 08:59:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:48 Set channel filter=0.000000e+000 result=40 08:59:48 Config A/D Result=40 08:59:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:48 Get A/D filter: -9.255963e+061 result=40 08:59:48 Get A/D value=-858993460 result=40 08:59:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:59:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:59:48 Aux= 08:59:48 Message to Camera, serial 100748 queued 09:00:24 Received message from Master: op=PointingHead serial=100761 09:00:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:00:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:00:25 Point started: ret=0 09:00:25 point_skyscan result=0 09:00:25 Check angles 09:00:25 SkyScan query 09:00:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:00:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:00:26 Message to Master queued w/err=0: serial=100761 error=0 09:00:31 Received message from Master: op=Filter serial=100762 09:00:31 Color wheel filter change from 0 to 0 09:00:31 FLIGetFilterPos err=0 currentPosition=0 09:00:31 FLIGetStepsRemaining err=0 RemainingSteps=0 09:00:31 Filter is already there-color wheel unchanged 09:00:31 Received message from Master: op=Shutter serial=100763 09:00:31 Shutter LASER close 09:00:31 Received message from Camera: op=State serial=100765 09:00:31 GetSingleValue result=40 Value=cccccccc 09:00:31 SkyScan query 09:00:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:00:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:32 Parameters OK 09:00:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:32 Set A/D data flow result=40 09:00:32 Set A/D channel type result=40 09:00:32 Set A/D encoding result=40 09:00:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:32 Set channel filter=0.000000e+000 result=40 09:00:32 Config A/D Result=40 09:00:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:32 Get A/D filter: -9.255963e+061 result=40 09:00:32 Get A/D value=-858993460 result=40 09:00:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:32 Parameters OK 09:00:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:32 Set A/D data flow result=40 09:00:32 Set A/D channel type result=40 09:00:32 Set A/D encoding result=40 09:00:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:32 Set channel filter=0.000000e+000 result=40 09:00:32 Config A/D Result=40 09:00:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:32 Get A/D filter: -9.255963e+061 result=40 09:00:32 Get A/D value=-858993460 result=40 09:00:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:00:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:00:32 Aux= 09:00:32 Message to Camera, serial 100765 queued 09:01:09 Received message from Master: op=PointingHead serial=100778 09:01:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:01:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:01:09 Point started: ret=0 09:01:09 point_skyscan result=0 09:01:10 Check angles 09:01:10 SkyScan query 09:01:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:01:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:01:10 Message to Master queued w/err=0: serial=100778 error=0 09:01:15 Received message from Master: op=Filter serial=100779 09:01:15 Color wheel filter change from 0 to 0 09:01:15 FLIGetFilterPos err=0 currentPosition=0 09:01:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:01:15 Filter is already there-color wheel unchanged 09:01:15 Received message from Master: op=Shutter serial=100780 09:01:15 Shutter LASER close 09:01:16 Received message from Camera: op=State serial=100782 09:01:16 GetSingleValue result=40 Value=cccccccc 09:01:16 SkyScan query 09:01:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:01:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:16 Parameters OK 09:01:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:16 Set A/D data flow result=40 09:01:16 Set A/D channel type result=40 09:01:16 Set A/D encoding result=40 09:01:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:16 Set channel filter=0.000000e+000 result=40 09:01:16 Config A/D Result=40 09:01:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:16 Get A/D filter: -9.255963e+061 result=40 09:01:16 Get A/D value=-858993460 result=40 09:01:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:16 Parameters OK 09:01:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:16 Set A/D data flow result=40 09:01:16 Set A/D channel type result=40 09:01:16 Set A/D encoding result=40 09:01:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:16 Set channel filter=0.000000e+000 result=40 09:01:16 Config A/D Result=40 09:01:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:16 Get A/D filter: -9.255963e+061 result=40 09:01:16 Get A/D value=-858993460 result=40 09:01:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:01:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:01:16 Aux= 09:01:16 Message to Camera, serial 100782 queued 09:01:53 Received message from Master: op=PointingHead serial=100795 09:01:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:01:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:01:53 Point started: ret=0 09:01:53 point_skyscan result=0 09:01:54 Check angles 09:01:54 SkyScan query 09:01:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:01:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:01:55 Message to Master queued w/err=0: serial=100795 error=0 09:02:00 Received message from Master: op=Filter serial=100796 09:02:00 Color wheel filter change from 0 to 0 09:02:00 FLIGetFilterPos err=0 currentPosition=0 09:02:00 FLIGetStepsRemaining err=0 RemainingSteps=0 09:02:00 Filter is already there-color wheel unchanged 09:02:00 Received message from Master: op=Shutter serial=100797 09:02:00 Shutter LASER close 09:02:00 Received message from Camera: op=State serial=100799 09:02:00 GetSingleValue result=40 Value=cccccccc 09:02:00 SkyScan query 09:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:02:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:00 Parameters OK 09:02:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:00 Set A/D data flow result=40 09:02:00 Set A/D channel type result=40 09:02:00 Set A/D encoding result=40 09:02:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:00 Set channel filter=0.000000e+000 result=40 09:02:00 Config A/D Result=40 09:02:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:00 Get A/D filter: -9.255963e+061 result=40 09:02:00 Get A/D value=-858993460 result=40 09:02:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:00 Parameters OK 09:02:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:00 Set A/D data flow result=40 09:02:00 Set A/D channel type result=40 09:02:00 Set A/D encoding result=40 09:02:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:00 Set channel filter=0.000000e+000 result=40 09:02:00 Config A/D Result=40 09:02:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:00 Get A/D filter: -9.255963e+061 result=40 09:02:00 Get A/D value=-858993460 result=40 09:02:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:02:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:02:00 Aux= 09:02:00 Message to Camera, serial 100799 queued 09:02:37 Received message from Master: op=PointingHead serial=100812 09:02:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:02:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:02:38 Point started: ret=0 09:02:38 point_skyscan result=0 09:02:38 Check angles 09:02:38 SkyScan query 09:02:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.745<-13583 Statuses=0008 0009 09:02:39 Msec=0 True Az=112.995 Ze=-23.745 Az status=0008 Ze status=0009 09:02:39 Check angles 09:02:39 SkyScan query 09:02:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.67<-14978 Statuses=0008 0009 09:02:40 Msec=750 True Az=112.995 Ze=-44.67 Az status=0008 Ze status=0009 09:02:40 Check angles 09:02:40 SkyScan query 09:02:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.64<-16376 Statuses=0008 0009 09:02:40 Msec=1500 True Az=112.995 Ze=-65.64 Az status=0008 Ze status=0009 09:02:41 Check angles 09:02:41 SkyScan query 09:02:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.03<-17802 Statuses=0008 0009 09:02:41 Msec=2250 True Az=112.995 Ze=-87.03 Az status=0008 Ze status=0009 09:02:41 Check angles 09:02:41 SkyScan query 09:02:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.97<-19198 Statuses=0008 0009 09:02:42 Msec=3000 True Az=112.995 Ze=-107.97 Az status=0008 Ze status=0009 09:02:42 Check angles 09:02:42 SkyScan query 09:02:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.94<-20596 Statuses=0008 0009 09:02:43 Msec=3750 True Az=112.995 Ze=-128.94 Az status=0008 Ze status=0009 09:02:43 Check angles 09:02:43 SkyScan query 09:02:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.345<-22023 Statuses=0008 0009 09:02:43 Msec=4500 True Az=112.995 Ze=-150.345 Az status=0008 Ze status=0009 09:02:44 Check angles 09:02:44 SkyScan query 09:02:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.12<-23408 Statuses=0008 0009 09:02:44 Msec=5250 True Az=112.995 Ze=-171.12 Az status=0008 Ze status=0009 09:02:44 Check angles 09:02:44 SkyScan query 09:02:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:02:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:02:45 Message to Master queued w/err=0: serial=100812 error=0 09:02:50 Received message from Master: op=Filter serial=100813 09:02:50 Color wheel filter change from 0 to 0 09:02:50 FLIGetFilterPos err=0 currentPosition=0 09:02:50 FLIGetStepsRemaining err=0 RemainingSteps=0 09:02:50 Filter is already there-color wheel unchanged 09:02:50 Received message from Master: op=Shutter serial=100814 09:02:50 Shutter LASER open 09:02:50 Received message from Camera: op=State serial=100816 09:02:50 GetSingleValue result=40 Value=cccccccc 09:02:50 SkyScan query 09:02:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:02:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:51 Parameters OK 09:02:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:51 Set A/D data flow result=40 09:02:51 Set A/D channel type result=40 09:02:51 Set A/D encoding result=40 09:02:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:51 Set channel filter=0.000000e+000 result=40 09:02:51 Config A/D Result=40 09:02:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:51 Get A/D filter: -9.255963e+061 result=40 09:02:51 Get A/D value=-858993460 result=40 09:02:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:51 Parameters OK 09:02:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:51 Set A/D data flow result=40 09:02:51 Set A/D channel type result=40 09:02:51 Set A/D encoding result=40 09:02:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:51 Set channel filter=0.000000e+000 result=40 09:02:51 Config A/D Result=40 09:02:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:51 Get A/D filter: -9.255963e+061 result=40 09:02:51 Get A/D value=-858993460 result=40 09:02:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:02:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:02:51 Aux= 09:02:51 Message to Camera, serial 100816 queued 09:02:58 Received message from Master: op=Shutter serial=100825 09:02:58 Shutter LASER close 09:02:59 Received message from Master: op=PointingHead serial=100829 09:02:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:02:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:02:59 Point started: ret=0 09:02:59 point_skyscan result=0 09:03:00 Check angles 09:03:00 SkyScan query 09:03:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 09:03:01 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 09:03:01 Check angles 09:03:01 SkyScan query 09:03:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.31<-20154 Statuses=0008 0009 09:03:01 Msec=750 True Az=112.995 Ze=-122.31 Az status=0008 Ze status=0009 09:03:02 Check angles 09:03:02 SkyScan query 09:03:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.355<-18757 Statuses=0008 0009 09:03:02 Msec=1500 True Az=112.995 Ze=-101.355 Az status=0008 Ze status=0009 09:03:02 Check angles 09:03:02 SkyScan query 09:03:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.385<-17359 Statuses=0008 0009 09:03:03 Msec=2250 True Az=112.995 Ze=-80.385 Az status=0008 Ze status=0009 09:03:03 Check angles 09:03:03 SkyScan query 09:03:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.445<-15963 Statuses=0008 0009 09:03:04 Msec=3000 True Az=112.995 Ze=-59.445 Az status=0008 Ze status=0009 09:03:04 Check angles 09:03:04 SkyScan query 09:03:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.46<-14564 Statuses=0008 0009 09:03:04 Msec=3750 True Az=112.995 Ze=-38.46 Az status=0008 Ze status=0009 09:03:05 Check angles 09:03:05 SkyScan query 09:03:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.52<-13168 Statuses=0008 0009 09:03:05 Msec=4500 True Az=112.995 Ze=-17.52 Az status=0008 Ze status=0009 09:03:05 Check angles 09:03:05 SkyScan query 09:03:06 SkyScan query done: ret=0 az=112.995<-7533 ze=3.45<-11770 Statuses=0008 0009 09:03:06 Msec=5250 True Az=112.995 Ze=3.45 Az status=0008 Ze status=0009 09:03:06 Check angles 09:03:06 SkyScan query 09:03:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:03:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:03:07 Message to Master queued w/err=0: serial=100829 error=0 09:03:12 Received message from Master: op=Filter serial=100830 09:03:12 Color wheel filter change from 0 to 0 09:03:12 FLIGetFilterPos err=0 currentPosition=0 09:03:12 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:12 Filter is already there-color wheel unchanged 09:03:12 Received message from Master: op=Shutter serial=100831 09:03:12 Shutter LASER close 09:03:12 Received message from Camera: op=State serial=100833 09:03:12 GetSingleValue result=40 Value=cccccccc 09:03:12 SkyScan query 09:03:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:03:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:13 Parameters OK 09:03:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:13 Set A/D data flow result=40 09:03:13 Set A/D channel type result=40 09:03:13 Set A/D encoding result=40 09:03:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:13 Set channel filter=0.000000e+000 result=40 09:03:13 Config A/D Result=40 09:03:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:13 Get A/D filter: -9.255963e+061 result=40 09:03:13 Get A/D value=-858993460 result=40 09:03:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:13 Parameters OK 09:03:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:13 Set A/D data flow result=40 09:03:13 Set A/D channel type result=40 09:03:13 Set A/D encoding result=40 09:03:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:13 Set channel filter=0.000000e+000 result=40 09:03:13 Config A/D Result=40 09:03:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:13 Get A/D filter: -9.255963e+061 result=40 09:03:13 Get A/D value=-858993460 result=40 09:03:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:03:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:03:13 Aux= 09:03:13 Message to Camera, serial 100833 queued 09:03:38 Received message from Master: op=Identify serial=100834 09:03:49 Received message from Master: op=PointingHead serial=100849 09:03:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:03:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:03:50 Point started: ret=0 09:03:50 point_skyscan result=0 [UTC 2019-3-4 09:03:50] 09:03:51 Check angles 09:03:51 SkyScan query 09:03:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:03:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:03:51 Message to Master queued w/err=0: serial=100849 error=0 09:03:56 Received message from Master: op=Filter serial=100850 09:03:56 Color wheel filter change from 0 to 0 09:03:56 FLIGetFilterPos err=0 currentPosition=0 09:03:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:56 Filter is already there-color wheel unchanged 09:03:56 Received message from Master: op=Shutter serial=100851 09:03:56 Shutter LASER close 09:03:56 Received message from Camera: op=State serial=100853 09:03:56 GetSingleValue result=40 Value=cccccccc 09:03:56 SkyScan query 09:03:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:03:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:57 Parameters OK 09:03:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:57 Set A/D data flow result=40 09:03:57 Set A/D channel type result=40 09:03:57 Set A/D encoding result=40 09:03:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:57 Set channel filter=0.000000e+000 result=40 09:03:57 Config A/D Result=40 09:03:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:57 Get A/D filter: -9.255963e+061 result=40 09:03:57 Get A/D value=-858993460 result=40 09:03:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:57 Parameters OK 09:03:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:57 Set A/D data flow result=40 09:03:57 Set A/D channel type result=40 09:03:57 Set A/D encoding result=40 09:03:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:57 Set channel filter=0.000000e+000 result=40 09:03:57 Config A/D Result=40 09:03:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:57 Get A/D filter: -9.255963e+061 result=40 09:03:57 Get A/D value=-858993460 result=40 09:03:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:03:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:03:57 Aux= 09:03:57 Message to Camera, serial 100853 queued 09:04:34 Received message from Master: op=PointingHead serial=100866 09:04:34 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:04:34 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:04:34 Point started: ret=0 09:04:34 point_skyscan result=0 09:04:35 Check angles 09:04:35 SkyScan query 09:04:35 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 09:04:35 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 09:04:36 Check angles 09:04:36 SkyScan query 09:04:36 SkyScan query done: ret=0 az=154.125<-10275 ze=-6.495<-12433 Statuses=0009 0008 09:04:36 Msec=750 True Az=154.125 Ze=-6.495 Az status=0009 Ze status=0008 09:04:36 Check angles 09:04:36 SkyScan query 09:04:37 SkyScan query done: ret=0 az=171.63<-11442 ze=-6.495<-12433 Statuses=0009 0008 09:04:37 Msec=1500 True Az=171.63 Ze=-6.495 Az status=0009 Ze status=0008 09:04:37 Check angles 09:04:37 SkyScan query 09:04:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:04:38 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:04:38 Message to Master queued w/err=0: serial=100866 error=0 09:04:43 Received message from Master: op=Filter serial=100867 09:04:43 Color wheel filter change from 0 to 0 09:04:43 FLIGetFilterPos err=0 currentPosition=0 09:04:43 FLIGetStepsRemaining err=0 RemainingSteps=0 09:04:43 Filter is already there-color wheel unchanged 09:04:43 Received message from Master: op=Shutter serial=100868 09:04:43 Shutter LASER close 09:04:43 Received message from Camera: op=State serial=100870 09:04:43 GetSingleValue result=40 Value=cccccccc 09:04:43 SkyScan query 09:04:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:04:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:43 Parameters OK 09:04:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:43 Set A/D data flow result=40 09:04:43 Set A/D channel type result=40 09:04:43 Set A/D encoding result=40 09:04:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:43 Set channel filter=0.000000e+000 result=40 09:04:43 Config A/D Result=40 09:04:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:43 Get A/D filter: -9.255963e+061 result=40 09:04:43 Get A/D value=-858993460 result=40 09:04:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:43 Parameters OK 09:04:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:43 Set A/D data flow result=40 09:04:43 Set A/D channel type result=40 09:04:43 Set A/D encoding result=40 09:04:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:43 Set channel filter=0.000000e+000 result=40 09:04:43 Config A/D Result=40 09:04:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:43 Get A/D filter: -9.255963e+061 result=40 09:04:43 Get A/D value=-858993460 result=40 09:04:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:43 Aux= 09:04:43 Message to Camera, serial 100870 queued 09:05:20 Received message from Master: op=PointingHead serial=100883 09:05:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:05:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:05:21 Point started: ret=0 09:05:21 point_skyscan result=0 09:05:21 Check angles 09:05:21 SkyScan query 09:05:22 SkyScan query done: ret=0 az=153.03<-10202 ze=6.51<-11566 Statuses=0009 0008 09:05:22 Msec=0 True Az=153.03 Ze=6.51 Az status=0009 Ze status=0008 09:05:22 Check angles 09:05:22 SkyScan query 09:05:23 SkyScan query done: ret=0 az=135.12<-9008 ze=6.495<-11567 Statuses=0009 0008 09:05:23 Msec=750 True Az=135.12 Ze=6.495 Az status=0009 Ze status=0008 09:05:23 Check angles 09:05:23 SkyScan query 09:05:23 SkyScan query done: ret=0 az=117.66<-7844 ze=6.495<-11567 Statuses=0009 0008 09:05:23 Msec=1500 True Az=117.66 Ze=6.495 Az status=0009 Ze status=0008 09:05:24 Check angles 09:05:24 SkyScan query 09:05:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:05:24 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:05:24 Message to Master queued w/err=0: serial=100883 error=0 09:05:29 Received message from Master: op=Filter serial=100884 09:05:29 Color wheel filter change from 0 to 0 09:05:29 FLIGetFilterPos err=0 currentPosition=0 09:05:29 FLIGetStepsRemaining err=0 RemainingSteps=0 09:05:29 Filter is already there-color wheel unchanged 09:05:29 Received message from Master: op=Shutter serial=100885 09:05:29 Shutter LASER close 09:05:29 Received message from Camera: op=State serial=100887 09:05:29 GetSingleValue result=40 Value=cccccccc 09:05:29 SkyScan query 09:05:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:05:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:30 Parameters OK 09:05:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:30 Set A/D data flow result=40 09:05:30 Set A/D channel type result=40 09:05:30 Set A/D encoding result=40 09:05:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:30 Set channel filter=0.000000e+000 result=40 09:05:30 Config A/D Result=40 09:05:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:30 Get A/D filter: -9.255963e+061 result=40 09:05:30 Get A/D value=-858993460 result=40 09:05:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:30 Parameters OK 09:05:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:30 Set A/D data flow result=40 09:05:30 Set A/D channel type result=40 09:05:30 Set A/D encoding result=40 09:05:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:30 Set channel filter=0.000000e+000 result=40 09:05:30 Config A/D Result=40 09:05:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:30 Get A/D filter: -9.255963e+061 result=40 09:05:30 Get A/D value=-858993460 result=40 09:05:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:05:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:05:30 Aux= 09:05:30 Message to Camera, serial 100887 queued 09:06:07 Received message from Master: op=PointingHead serial=100900 09:06:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:06:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:06:07 Point started: ret=0 09:06:07 point_skyscan result=0 09:06:08 Check angles 09:06:08 SkyScan query 09:06:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.46<-13564 Statuses=0008 0009 09:06:09 Msec=0 True Az=112.995 Ze=-23.46 Az status=0008 Ze status=0009 09:06:09 Check angles 09:06:09 SkyScan query 09:06:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.805<-14987 Statuses=0008 0009 09:06:09 Msec=750 True Az=112.995 Ze=-44.805 Az status=0008 Ze status=0009 09:06:09 Check angles 09:06:09 SkyScan query 09:06:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.79<-16386 Statuses=0008 0009 09:06:10 Msec=1500 True Az=112.995 Ze=-65.79 Az status=0008 Ze status=0009 09:06:10 Check angles 09:06:10 SkyScan query 09:06:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.73<-17782 Statuses=0008 0009 09:06:11 Msec=2250 True Az=112.995 Ze=-86.73 Az status=0008 Ze status=0009 09:06:11 Check angles 09:06:11 SkyScan query 09:06:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.715<-19181 Statuses=0008 0009 09:06:12 Msec=3000 True Az=112.995 Ze=-107.715 Az status=0008 Ze status=0009 09:06:12 Check angles 09:06:12 SkyScan query 09:06:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.64<-20576 Statuses=0008 0009 09:06:12 Msec=3750 True Az=112.995 Ze=-128.64 Az status=0008 Ze status=0009 09:06:12 Check angles 09:06:12 SkyScan query 09:06:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.075<-22005 Statuses=0008 0009 09:06:13 Msec=4500 True Az=112.995 Ze=-150.075 Az status=0008 Ze status=0009 09:06:13 Check angles 09:06:13 SkyScan query 09:06:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.925<-23395 Statuses=0008 0009 09:06:14 Msec=5250 True Az=112.995 Ze=-170.925 Az status=0008 Ze status=0009 09:06:14 Check angles 09:06:14 SkyScan query 09:06:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:06:15 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:06:15 Message to Master queued w/err=0: serial=100900 error=0 09:06:20 Received message from Master: op=Filter serial=100901 09:06:20 Color wheel filter change from 0 to 0 09:06:20 FLIGetFilterPos err=0 currentPosition=0 09:06:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:06:20 Filter is already there-color wheel unchanged 09:06:20 Received message from Master: op=Shutter serial=100902 09:06:20 Shutter LASER open 09:06:20 Received message from Camera: op=State serial=100904 09:06:20 GetSingleValue result=40 Value=cccccccc 09:06:20 SkyScan query 09:06:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:06:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:20 Parameters OK 09:06:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:20 Set A/D data flow result=40 09:06:20 Set A/D channel type result=40 09:06:20 Set A/D encoding result=40 09:06:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:20 Set channel filter=0.000000e+000 result=40 09:06:20 Config A/D Result=40 09:06:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:20 Get A/D filter: -9.255963e+061 result=40 09:06:20 Get A/D value=-858993460 result=40 09:06:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:20 Parameters OK 09:06:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:20 Set A/D data flow result=40 09:06:20 Set A/D channel type result=40 09:06:20 Set A/D encoding result=40 09:06:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:20 Set channel filter=0.000000e+000 result=40 09:06:20 Config A/D Result=40 09:06:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:20 Get A/D filter: -9.255963e+061 result=40 09:06:20 Get A/D value=-858993460 result=40 09:06:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:06:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:06:20 Aux= 09:06:20 Message to Camera, serial 100904 queued 09:06:29 Received message from Master: op=Shutter serial=100914 09:06:29 Shutter LASER close 09:06:29 Received message from Master: op=PointingHead serial=100918 09:06:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:06:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:06:30 Point started: ret=0 09:06:30 point_skyscan result=0 09:06:30 Check angles 09:06:30 SkyScan query 09:06:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.04<-21536 Statuses=0008 0009 09:06:31 Msec=0 True Az=112.995 Ze=-143.04 Az status=0008 Ze status=0009 09:06:31 Check angles 09:06:31 SkyScan query 09:06:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.59<-20106 Statuses=0008 0009 09:06:32 Msec=750 True Az=112.995 Ze=-121.59 Az status=0008 Ze status=0009 09:06:32 Check angles 09:06:32 SkyScan query 09:06:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.68<-18712 Statuses=0008 0009 09:06:33 Msec=1500 True Az=112.995 Ze=-100.68 Az status=0008 Ze status=0009 09:06:33 Check angles 09:06:33 SkyScan query 09:06:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.68<-17312 Statuses=0008 0009 09:06:33 Msec=2250 True Az=112.995 Ze=-79.68 Az status=0008 Ze status=0009 09:06:33 Check angles 09:06:33 SkyScan query 09:06:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.74<-15916 Statuses=0008 0009 09:06:34 Msec=3000 True Az=112.995 Ze=-58.74 Az status=0008 Ze status=0009 09:06:34 Check angles 09:06:34 SkyScan query 09:06:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.77<-14518 Statuses=0008 0009 09:06:35 Msec=3750 True Az=112.995 Ze=-37.77 Az status=0008 Ze status=0009 09:06:35 Check angles 09:06:35 SkyScan query 09:06:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.845<-13123 Statuses=0008 0009 09:06:36 Msec=4500 True Az=112.995 Ze=-16.845 Az status=0008 Ze status=0009 09:06:36 Check angles 09:06:36 SkyScan query 09:06:36 SkyScan query done: ret=0 az=112.995<-7533 ze=4.095<-11727 Statuses=0008 0009 09:06:36 Msec=5250 True Az=112.995 Ze=4.095 Az status=0008 Ze status=0009 09:06:36 Check angles 09:06:36 SkyScan query 09:06:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:06:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:06:37 Message to Master queued w/err=0: serial=100918 error=0 09:06:42 Received message from Master: op=Filter serial=100919 09:06:42 Color wheel filter change from 0 to 0 09:06:42 FLIGetFilterPos err=0 currentPosition=0 09:06:42 FLIGetStepsRemaining err=0 RemainingSteps=0 09:06:42 Filter is already there-color wheel unchanged 09:06:42 Received message from Master: op=Shutter serial=100920 09:06:42 Shutter LASER close 09:06:42 Received message from Camera: op=State serial=100922 09:06:42 GetSingleValue result=40 Value=cccccccc 09:06:42 SkyScan query 09:06:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:06:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:43 Parameters OK 09:06:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:43 Set A/D data flow result=40 09:06:43 Set A/D channel type result=40 09:06:43 Set A/D encoding result=40 09:06:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:43 Set channel filter=0.000000e+000 result=40 09:06:43 Config A/D Result=40 09:06:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:43 Get A/D filter: -9.255963e+061 result=40 09:06:43 Get A/D value=-858993460 result=40 09:06:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:43 Parameters OK 09:06:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:43 Set A/D data flow result=40 09:06:43 Set A/D channel type result=40 09:06:43 Set A/D encoding result=40 09:06:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:43 Set channel filter=0.000000e+000 result=40 09:06:43 Config A/D Result=40 09:06:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:43 Get A/D filter: -9.255963e+061 result=40 09:06:43 Get A/D value=-858993460 result=40 09:06:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:06:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:06:43 Aux= 09:06:43 Message to Camera, serial 100922 queued 09:07:20 Received message from Master: op=PointingHead serial=100935 09:07:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:07:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:07:20 Point started: ret=0 09:07:20 point_skyscan result=0 09:07:21 Check angles 09:07:21 SkyScan query 09:07:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:07:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:07:22 Message to Master queued w/err=0: serial=100935 error=0 09:07:27 Received message from Master: op=Filter serial=100936 09:07:27 Color wheel filter change from 0 to 0 09:07:27 FLIGetFilterPos err=0 currentPosition=0 09:07:27 FLIGetStepsRemaining err=0 RemainingSteps=0 09:07:27 Filter is already there-color wheel unchanged 09:07:27 Received message from Master: op=Shutter serial=100937 09:07:27 Shutter LASER close 09:07:27 Received message from Camera: op=State serial=100939 09:07:27 GetSingleValue result=40 Value=cccccccc 09:07:27 SkyScan query 09:07:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:07:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:27 Parameters OK 09:07:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:27 Set A/D data flow result=40 09:07:27 Set A/D channel type result=40 09:07:27 Set A/D encoding result=40 09:07:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:27 Set channel filter=0.000000e+000 result=40 09:07:27 Config A/D Result=40 09:07:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:27 Get A/D filter: -9.255963e+061 result=40 09:07:27 Get A/D value=-858993460 result=40 09:07:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:27 Parameters OK 09:07:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:27 Set A/D data flow result=40 09:07:27 Set A/D channel type result=40 09:07:27 Set A/D encoding result=40 09:07:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:27 Set channel filter=0.000000e+000 result=40 09:07:27 Config A/D Result=40 09:07:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:27 Get A/D filter: -9.255963e+061 result=40 09:07:27 Get A/D value=-858993460 result=40 09:07:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:07:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:07:27 Aux= 09:07:27 Message to Camera, serial 100939 queued 09:08:03 Received message from Master: op=PointingHead serial=100951 09:08:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:08:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:08:04 Point started: ret=0 09:08:04 point_skyscan result=0 09:08:04 Check angles 09:08:04 SkyScan query 09:08:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:08:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:08:05 Message to Master queued w/err=0: serial=100951 error=0 09:08:10 Received message from Master: op=Filter serial=100952 09:08:10 Color wheel filter change from 0 to 0 09:08:10 FLIGetFilterPos err=0 currentPosition=0 09:08:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:08:10 Filter is already there-color wheel unchanged 09:08:10 Received message from Master: op=Shutter serial=100953 09:08:10 Shutter LASER close 09:08:10 Received message from Camera: op=State serial=100955 09:08:10 GetSingleValue result=40 Value=cccccccc 09:08:10 SkyScan query 09:08:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:08:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:11 Parameters OK 09:08:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:11 Set A/D data flow result=40 09:08:11 Set A/D channel type result=40 09:08:11 Set A/D encoding result=40 09:08:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:11 Set channel filter=0.000000e+000 result=40 09:08:11 Config A/D Result=40 09:08:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:11 Get A/D filter: -9.255963e+061 result=40 09:08:11 Get A/D value=-858993460 result=40 09:08:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:11 Parameters OK 09:08:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:11 Set A/D data flow result=40 09:08:11 Set A/D channel type result=40 09:08:11 Set A/D encoding result=40 09:08:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:11 Set channel filter=0.000000e+000 result=40 09:08:11 Config A/D Result=40 09:08:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:11 Get A/D filter: -9.255963e+061 result=40 09:08:11 Get A/D value=-858993460 result=40 09:08:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:08:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:08:11 Aux= 09:08:11 Message to Camera, serial 100955 queued 09:08:48 Received message from Master: op=PointingHead serial=100968 09:08:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:08:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:08:48 Point started: ret=0 09:08:48 point_skyscan result=0 09:08:49 Check angles 09:08:49 SkyScan query 09:08:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:08:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:08:49 Message to Master queued w/err=0: serial=100968 error=0 09:08:54 Received message from Master: op=Filter serial=100969 09:08:54 Color wheel filter change from 0 to 0 09:08:54 FLIGetFilterPos err=0 currentPosition=0 09:08:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:08:54 Filter is already there-color wheel unchanged 09:08:55 Received message from Master: op=Shutter serial=100970 09:08:55 Shutter LASER close 09:08:55 Received message from Camera: op=State serial=100972 09:08:55 GetSingleValue result=40 Value=cccccccc 09:08:55 SkyScan query 09:08:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:08:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:55 Parameters OK 09:08:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:55 Set A/D data flow result=40 09:08:55 Set A/D channel type result=40 09:08:55 Set A/D encoding result=40 09:08:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:55 Set channel filter=0.000000e+000 result=40 09:08:55 Config A/D Result=40 09:08:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:55 Get A/D filter: -9.255963e+061 result=40 09:08:55 Get A/D value=-858993460 result=40 09:08:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:55 Parameters OK 09:08:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:55 Set A/D data flow result=40 09:08:55 Set A/D channel type result=40 09:08:55 Set A/D encoding result=40 09:08:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:55 Set channel filter=0.000000e+000 result=40 09:08:55 Config A/D Result=40 09:08:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:55 Get A/D filter: -9.255963e+061 result=40 09:08:55 Get A/D value=-858993460 result=40 09:08:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:08:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:08:55 Aux= 09:08:55 Message to Camera, serial 100972 queued 09:09:32 Received message from Master: op=PointingHead serial=100985 09:09:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:09:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:09:32 Point started: ret=0 09:09:32 point_skyscan result=0 09:09:33 Check angles 09:09:33 SkyScan query 09:09:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.715<-13581 Statuses=0008 0009 09:09:34 Msec=0 True Az=112.995 Ze=-23.715 Az status=0008 Ze status=0009 09:09:34 Check angles 09:09:34 SkyScan query 09:09:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.655<-14977 Statuses=0008 0009 09:09:34 Msec=750 True Az=112.995 Ze=-44.655 Az status=0008 Ze status=0009 09:09:35 Check angles 09:09:35 SkyScan query 09:09:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.595<-16373 Statuses=0008 0009 09:09:35 Msec=1500 True Az=112.995 Ze=-65.595 Az status=0008 Ze status=0009 09:09:35 Check angles 09:09:35 SkyScan query 09:09:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.97<-17798 Statuses=0008 0009 09:09:36 Msec=2250 True Az=112.995 Ze=-86.97 Az status=0008 Ze status=0009 09:09:36 Check angles 09:09:36 SkyScan query 09:09:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.955<-19197 Statuses=0008 0009 09:09:37 Msec=3000 True Az=112.995 Ze=-107.955 Az status=0008 Ze status=0009 09:09:37 Check angles 09:09:37 SkyScan query 09:09:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.895<-20593 Statuses=0008 0009 09:09:37 Msec=3750 True Az=112.995 Ze=-128.895 Az status=0008 Ze status=0009 09:09:38 Check angles 09:09:38 SkyScan query 09:09:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.88<-21992 Statuses=0008 0009 09:09:38 Msec=4500 True Az=112.995 Ze=-149.88 Az status=0008 Ze status=0009 09:09:38 Check angles 09:09:38 SkyScan query 09:09:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.76<-23384 Statuses=0008 0009 09:09:39 Msec=5250 True Az=112.995 Ze=-170.76 Az status=0008 Ze status=0009 09:09:39 Check angles 09:09:39 SkyScan query 09:09:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:09:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:09:40 Message to Master queued w/err=0: serial=100985 error=0 09:09:45 Received message from Master: op=Filter serial=100986 09:09:45 Color wheel filter change from 0 to 0 09:09:45 FLIGetFilterPos err=0 currentPosition=0 09:09:45 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:45 Filter is already there-color wheel unchanged 09:09:45 Received message from Master: op=Shutter serial=100987 09:09:45 Shutter LASER open 09:09:45 Received message from Camera: op=State serial=100989 09:09:45 GetSingleValue result=40 Value=cccccccc 09:09:45 SkyScan query 09:09:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:09:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:46 Parameters OK 09:09:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:46 Set A/D data flow result=40 09:09:46 Set A/D channel type result=40 09:09:46 Set A/D encoding result=40 09:09:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:46 Set channel filter=0.000000e+000 result=40 09:09:46 Config A/D Result=40 09:09:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:46 Get A/D filter: -9.255963e+061 result=40 09:09:46 Get A/D value=-858993460 result=40 09:09:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:46 Parameters OK 09:09:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:46 Set A/D data flow result=40 09:09:46 Set A/D channel type result=40 09:09:46 Set A/D encoding result=40 09:09:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:46 Set channel filter=0.000000e+000 result=40 09:09:46 Config A/D Result=40 09:09:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:46 Get A/D filter: -9.255963e+061 result=40 09:09:46 Get A/D value=-858993460 result=40 09:09:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:09:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:09:46 Aux= 09:09:46 Message to Camera, serial 100989 queued 09:09:54 Received message from Master: op=Shutter serial=100999 09:09:54 Shutter LASER close 09:09:55 Received message from Master: op=PointingHead serial=101003 09:09:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:09:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:09:55 Point started: ret=0 09:09:55 point_skyscan result=0 09:09:56 Check angles 09:09:56 SkyScan query 09:09:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 09:09:56 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 09:09:56 Check angles 09:09:56 SkyScan query 09:09:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 09:09:57 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 09:09:57 Check angles 09:09:57 SkyScan query 09:09:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.98<-18732 Statuses=0008 0009 09:09:58 Msec=1500 True Az=112.995 Ze=-100.98 Az status=0008 Ze status=0009 09:09:58 Check angles 09:09:58 SkyScan query 09:09:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.01<-17334 Statuses=0008 0009 09:09:59 Msec=2250 True Az=112.995 Ze=-80.01 Az status=0008 Ze status=0009 09:09:59 Check angles 09:09:59 SkyScan query 09:09:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.07<-15938 Statuses=0008 0009 09:09:59 Msec=3000 True Az=112.995 Ze=-59.07 Az status=0008 Ze status=0009 09:09:59 Check angles 09:09:59 SkyScan query 09:10:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.04<-14536 Statuses=0008 0009 09:10:00 Msec=3750 True Az=112.995 Ze=-38.04 Az status=0008 Ze status=0009 09:10:00 Check angles 09:10:00 SkyScan query 09:10:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.13<-13142 Statuses=0008 0009 09:10:01 Msec=4500 True Az=112.995 Ze=-17.13 Az status=0008 Ze status=0009 09:10:01 Check angles 09:10:01 SkyScan query 09:10:02 SkyScan query done: ret=0 az=112.995<-7533 ze=3.855<-11743 Statuses=0008 0009 09:10:02 Msec=5250 True Az=112.995 Ze=3.855 Az status=0008 Ze status=0009 09:10:02 Check angles 09:10:02 SkyScan query 09:10:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:10:02 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:10:02 Message to Master queued w/err=0: serial=101003 error=0 09:10:07 Received message from Master: op=Filter serial=101004 09:10:07 Color wheel filter change from 0 to 0 09:10:07 FLIGetFilterPos err=0 currentPosition=0 09:10:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:10:07 Filter is already there-color wheel unchanged 09:10:07 Received message from Master: op=Shutter serial=101005 09:10:07 Shutter LASER close 09:10:08 Received message from Camera: op=State serial=101007 09:10:08 GetSingleValue result=40 Value=cccccccc 09:10:08 SkyScan query 09:10:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:10:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:08 Parameters OK 09:10:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:08 Set A/D data flow result=40 09:10:08 Set A/D channel type result=40 09:10:08 Set A/D encoding result=40 09:10:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:08 Set channel filter=0.000000e+000 result=40 09:10:08 Config A/D Result=40 09:10:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:08 Get A/D filter: -9.255963e+061 result=40 09:10:08 Get A/D value=-858993460 result=40 09:10:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:08 Parameters OK 09:10:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:08 Set A/D data flow result=40 09:10:08 Set A/D channel type result=40 09:10:08 Set A/D encoding result=40 09:10:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:08 Set channel filter=0.000000e+000 result=40 09:10:08 Config A/D Result=40 09:10:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:08 Get A/D filter: -9.255963e+061 result=40 09:10:08 Get A/D value=-858993460 result=40 09:10:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:08 Aux= 09:10:08 Message to Camera, serial 101007 queued 09:10:45 Received message from Master: op=PointingHead serial=101020 09:10:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:10:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:10:45 Point started: ret=0 09:10:45 point_skyscan result=0 09:10:46 Check angles 09:10:46 SkyScan query 09:10:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:10:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:10:47 Message to Master queued w/err=0: serial=101020 error=0 09:10:52 Received message from Master: op=Filter serial=101021 09:10:52 Color wheel filter change from 0 to 0 09:10:52 FLIGetFilterPos err=0 currentPosition=0 09:10:52 FLIGetStepsRemaining err=0 RemainingSteps=0 09:10:52 Filter is already there-color wheel unchanged 09:10:52 Received message from Master: op=Shutter serial=101022 09:10:52 Shutter LASER close 09:10:52 Received message from Camera: op=State serial=101024 09:10:52 GetSingleValue result=40 Value=cccccccc 09:10:52 SkyScan query 09:10:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:10:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:53 Parameters OK 09:10:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:53 Set A/D data flow result=40 09:10:53 Set A/D channel type result=40 09:10:53 Set A/D encoding result=40 09:10:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:53 Set channel filter=0.000000e+000 result=40 09:10:53 Config A/D Result=40 09:10:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:53 Get A/D filter: -9.255963e+061 result=40 09:10:53 Get A/D value=-858993460 result=40 09:10:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:53 Parameters OK 09:10:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:53 Set A/D data flow result=40 09:10:53 Set A/D channel type result=40 09:10:53 Set A/D encoding result=40 09:10:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:53 Set channel filter=0.000000e+000 result=40 09:10:53 Config A/D Result=40 09:10:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:53 Get A/D filter: -9.255963e+061 result=40 09:10:53 Get A/D value=-858993460 result=40 09:10:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:53 Aux= 09:10:53 Message to Camera, serial 101024 queued 09:11:29 Received message from Master: op=PointingHead serial=101037 09:11:29 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:11:29 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:11:30 Point started: ret=0 09:11:30 point_skyscan result=0 09:11:30 Check angles 09:11:30 SkyScan query 09:11:31 SkyScan query done: ret=0 az=136.185<-9079 ze=-6.51<-12434 Statuses=0009 0008 09:11:31 Msec=0 True Az=136.185 Ze=-6.51 Az status=0009 Ze status=0008 09:11:31 Check angles 09:11:31 SkyScan query 09:11:32 SkyScan query done: ret=0 az=154.14<-10276 ze=-6.51<-12434 Statuses=0009 0008 09:11:32 Msec=750 True Az=154.14 Ze=-6.51 Az status=0009 Ze status=0008 09:11:32 Check angles 09:11:32 SkyScan query 09:11:33 SkyScan query done: ret=0 az=171.525<-11435 ze=-6.495<-12433 Statuses=0009 0008 09:11:33 Msec=1500 True Az=171.525 Ze=-6.495 Az status=0009 Ze status=0008 09:11:33 Check angles 09:11:33 SkyScan query 09:11:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:11:33 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:11:33 Message to Master queued w/err=0: serial=101037 error=0 09:11:38 Received message from Master: op=Filter serial=101038 09:11:38 Color wheel filter change from 0 to 0 09:11:38 FLIGetFilterPos err=0 currentPosition=0 09:11:38 FLIGetStepsRemaining err=0 RemainingSteps=0 09:11:38 Filter is already there-color wheel unchanged 09:11:38 Received message from Master: op=Shutter serial=101039 09:11:38 Shutter LASER close 09:11:39 Received message from Camera: op=State serial=101041 09:11:39 GetSingleValue result=40 Value=cccccccc 09:11:39 SkyScan query 09:11:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:11:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:39 Parameters OK 09:11:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:39 Set A/D data flow result=40 09:11:39 Set A/D channel type result=40 09:11:39 Set A/D encoding result=40 09:11:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:39 Set channel filter=0.000000e+000 result=40 09:11:39 Config A/D Result=40 09:11:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:39 Get A/D filter: -9.255963e+061 result=40 09:11:39 Get A/D value=-858993460 result=40 09:11:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:39 Parameters OK 09:11:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:39 Set A/D data flow result=40 09:11:39 Set A/D channel type result=40 09:11:39 Set A/D encoding result=40 09:11:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:39 Set channel filter=0.000000e+000 result=40 09:11:39 Config A/D Result=40 09:11:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:39 Get A/D filter: -9.255963e+061 result=40 09:11:39 Get A/D value=-858993460 result=40 09:11:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:11:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:11:39 Aux= 09:11:39 Message to Camera, serial 101041 queued 09:12:15 Received message from Master: op=PointingHead serial=101053 09:12:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:12:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:12:15 Point started: ret=0 09:12:15 point_skyscan result=0 09:12:16 Check angles 09:12:16 SkyScan query 09:12:17 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 09:12:17 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 09:12:17 Check angles 09:12:17 SkyScan query 09:12:17 SkyScan query done: ret=0 az=135.345<-9023 ze=6.495<-11567 Statuses=0009 0008 09:12:17 Msec=750 True Az=135.345 Ze=6.495 Az status=0009 Ze status=0008 09:12:18 Check angles 09:12:18 SkyScan query 09:12:18 SkyScan query done: ret=0 az=117.855<-7857 ze=6.495<-11567 Statuses=0009 0008 09:12:18 Msec=1500 True Az=117.855 Ze=6.495 Az status=0009 Ze status=0008 09:12:18 Check angles 09:12:18 SkyScan query 09:12:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:12:19 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:12:19 Message to Master queued w/err=0: serial=101053 error=0 09:12:24 Received message from Master: op=Filter serial=101054 09:12:24 Color wheel filter change from 0 to 0 09:12:24 FLIGetFilterPos err=0 currentPosition=0 09:12:24 FLIGetStepsRemaining err=0 RemainingSteps=0 09:12:24 Filter is already there-color wheel unchanged 09:12:24 Received message from Master: op=Shutter serial=101055 09:12:24 Shutter LASER close 09:12:24 Received message from Camera: op=State serial=101057 09:12:24 GetSingleValue result=40 Value=cccccccc 09:12:24 SkyScan query 09:12:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:12:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:25 Parameters OK 09:12:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:25 Set A/D data flow result=40 09:12:25 Set A/D channel type result=40 09:12:25 Set A/D encoding result=40 09:12:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:25 Set channel filter=0.000000e+000 result=40 09:12:25 Config A/D Result=40 09:12:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:25 Get A/D filter: -9.255963e+061 result=40 09:12:25 Get A/D value=-858993460 result=40 09:12:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:25 Parameters OK 09:12:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:25 Set A/D data flow result=40 09:12:25 Set A/D channel type result=40 09:12:25 Set A/D encoding result=40 09:12:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:25 Set channel filter=0.000000e+000 result=40 09:12:25 Config A/D Result=40 09:12:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:25 Get A/D filter: -9.255963e+061 result=40 09:12:25 Get A/D value=-858993460 result=40 09:12:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:12:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:12:25 Aux= 09:12:25 Message to Camera, serial 101057 queued 09:13:02 Received message from Master: op=PointingHead serial=101070 09:13:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:13:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:13:02 Point started: ret=0 09:13:02 point_skyscan result=0 09:13:03 Check angles 09:13:03 SkyScan query 09:13:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.01<-13534 Statuses=0008 0009 09:13:03 Msec=0 True Az=112.995 Ze=-23.01 Az status=0008 Ze status=0009 09:13:03 Check angles 09:13:03 SkyScan query 09:13:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 09:13:04 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 09:13:04 Check angles 09:13:04 SkyScan query 09:13:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 09:13:05 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 09:13:05 Check angles 09:13:05 SkyScan query 09:13:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.28<-17752 Statuses=0008 0009 09:13:05 Msec=2250 True Az=112.995 Ze=-86.28 Az status=0008 Ze status=0009 09:13:06 Check angles 09:13:06 SkyScan query 09:13:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.685<-19179 Statuses=0008 0009 09:13:06 Msec=3000 True Az=112.995 Ze=-107.685 Az status=0008 Ze status=0009 09:13:06 Check angles 09:13:06 SkyScan query 09:13:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.625<-20575 Statuses=0008 0009 09:13:07 Msec=3750 True Az=112.995 Ze=-128.625 Az status=0008 Ze status=0009 09:13:07 Check angles 09:13:07 SkyScan query 09:13:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.625<-21975 Statuses=0008 0009 09:13:08 Msec=4500 True Az=112.995 Ze=-149.625 Az status=0008 Ze status=0009 09:13:08 Check angles 09:13:08 SkyScan query 09:13:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.91<-23394 Statuses=0008 0009 09:13:09 Msec=5250 True Az=112.995 Ze=-170.91 Az status=0008 Ze status=0009 09:13:09 Check angles 09:13:09 SkyScan query 09:13:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:13:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:13:09 Message to Master queued w/err=0: serial=101070 error=0 09:13:14 Received message from Master: op=Filter serial=101071 09:13:14 Color wheel filter change from 0 to 0 09:13:14 FLIGetFilterPos err=0 currentPosition=0 09:13:14 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:14 Filter is already there-color wheel unchanged 09:13:14 Received message from Master: op=Shutter serial=101072 09:13:14 Shutter LASER open 09:13:15 Received message from Camera: op=State serial=101074 09:13:15 GetSingleValue result=40 Value=cccccccc 09:13:15 SkyScan query 09:13:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:13:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:15 Parameters OK 09:13:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:15 Set A/D data flow result=40 09:13:15 Set A/D channel type result=40 09:13:15 Set A/D encoding result=40 09:13:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:15 Set channel filter=0.000000e+000 result=40 09:13:15 Config A/D Result=40 09:13:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:15 Get A/D filter: -9.255963e+061 result=40 09:13:15 Get A/D value=-858993460 result=40 09:13:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:15 Parameters OK 09:13:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:15 Set A/D data flow result=40 09:13:15 Set A/D channel type result=40 09:13:15 Set A/D encoding result=40 09:13:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:15 Set channel filter=0.000000e+000 result=40 09:13:15 Config A/D Result=40 09:13:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:15 Get A/D filter: -9.255963e+061 result=40 09:13:15 Get A/D value=-858993460 result=40 09:13:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:15 Aux= 09:13:15 Message to Camera, serial 101074 queued 09:13:24 Received message from Master: op=Shutter serial=101084 09:13:24 Shutter LASER close 09:13:24 Received message from Master: op=PointingHead serial=101088 09:13:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:13:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:13:24 Point started: ret=0 09:13:24 point_skyscan result=0 09:13:25 Check angles 09:13:25 SkyScan query 09:13:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 09:13:26 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 09:13:26 Check angles 09:13:26 SkyScan query 09:13:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.28<-20152 Statuses=0008 0009 09:13:26 Msec=750 True Az=112.995 Ze=-122.28 Az status=0008 Ze status=0009 09:13:27 Check angles 09:13:27 SkyScan query 09:13:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.875<-18725 Statuses=0008 0009 09:13:27 Msec=1500 True Az=112.995 Ze=-100.875 Az status=0008 Ze status=0009 09:13:27 Check angles 09:13:27 SkyScan query 09:13:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.425<-17295 Statuses=0008 0009 09:13:28 Msec=2250 True Az=112.995 Ze=-79.425 Az status=0008 Ze status=0009 09:13:28 Check angles 09:13:28 SkyScan query 09:13:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.485<-15899 Statuses=0008 0009 09:13:29 Msec=3000 True Az=112.995 Ze=-58.485 Az status=0008 Ze status=0009 09:13:29 Check angles 09:13:29 SkyScan query 09:13:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.155<-14477 Statuses=0008 0009 09:13:30 Msec=3750 True Az=112.995 Ze=-37.155 Az status=0008 Ze status=0009 09:13:30 Check angles 09:13:30 SkyScan query 09:13:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.72<-13048 Statuses=0008 0009 09:13:30 Msec=4500 True Az=112.995 Ze=-15.72 Az status=0008 Ze status=0009 09:13:30 Check angles 09:13:30 SkyScan query 09:13:31 SkyScan query done: ret=0 az=112.995<-7533 ze=4.95<-11670 Statuses=0008 0009 09:13:31 Msec=5250 True Az=112.995 Ze=4.95 Az status=0008 Ze status=0009 09:13:31 Check angles 09:13:31 SkyScan query 09:13:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:13:32 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:13:32 Message to Master queued w/err=0: serial=101088 error=0 09:13:37 Received message from Master: op=Filter serial=101089 09:13:37 Color wheel filter change from 0 to 0 09:13:37 FLIGetFilterPos err=0 currentPosition=0 09:13:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:37 Filter is already there-color wheel unchanged 09:13:37 Received message from Master: op=Shutter serial=101090 09:13:37 Shutter LASER close 09:13:37 Received message from Camera: op=State serial=101092 09:13:37 GetSingleValue result=40 Value=cccccccc 09:13:37 SkyScan query 09:13:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:13:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:38 Parameters OK 09:13:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:38 Set A/D data flow result=40 09:13:38 Set A/D channel type result=40 09:13:38 Set A/D encoding result=40 09:13:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:38 Set channel filter=0.000000e+000 result=40 09:13:38 Config A/D Result=40 09:13:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:38 Get A/D filter: -9.255963e+061 result=40 09:13:38 Get A/D value=-858993460 result=40 09:13:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:38 Parameters OK 09:13:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:38 Set A/D data flow result=40 09:13:38 Set A/D channel type result=40 09:13:38 Set A/D encoding result=40 09:13:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:38 Set channel filter=0.000000e+000 result=40 09:13:38 Config A/D Result=40 09:13:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 [UTC 2019-3-4 09:13:38] 09:13:38 Get A/D filter: -9.255963e+061 result=40 09:13:38 Get A/D value=-858993460 result=40 09:13:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:38 Aux= 09:13:38 Message to Camera, serial 101092 queued 09:14:15 Received message from Master: op=PointingHead serial=101105 09:14:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:14:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:14:15 Point started: ret=0 09:14:15 point_skyscan result=0 09:14:16 Check angles 09:14:16 SkyScan query 09:14:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:14:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:14:16 Message to Master queued w/err=0: serial=101105 error=0 09:14:21 Received message from Master: op=Filter serial=101106 09:14:21 Color wheel filter change from 0 to 0 09:14:21 FLIGetFilterPos err=0 currentPosition=0 09:14:21 FLIGetStepsRemaining err=0 RemainingSteps=0 09:14:21 Filter is already there-color wheel unchanged 09:14:21 Received message from Master: op=Shutter serial=101107 09:14:21 Shutter LASER close 09:14:21 Received message from Camera: op=State serial=101109 09:14:21 GetSingleValue result=40 Value=cccccccc 09:14:21 SkyScan query 09:14:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:14:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:22 Parameters OK 09:14:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:22 Set A/D data flow result=40 09:14:22 Set A/D channel type result=40 09:14:22 Set A/D encoding result=40 09:14:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:22 Set channel filter=0.000000e+000 result=40 09:14:22 Config A/D Result=40 09:14:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:22 Get A/D filter: -9.255963e+061 result=40 09:14:22 Get A/D value=-858993460 result=40 09:14:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:22 Parameters OK 09:14:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:22 Set A/D data flow result=40 09:14:22 Set A/D channel type result=40 09:14:22 Set A/D encoding result=40 09:14:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:22 Set channel filter=0.000000e+000 result=40 09:14:22 Config A/D Result=40 09:14:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:22 Get A/D filter: -9.255963e+061 result=40 09:14:22 Get A/D value=-858993460 result=40 09:14:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:14:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:14:22 Aux= 09:14:22 Message to Camera, serial 101109 queued 09:14:59 Received message from Master: op=PointingHead serial=101122 09:14:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:14:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:14:59 Point started: ret=0 09:14:59 point_skyscan result=0 09:15:00 Check angles 09:15:00 SkyScan query 09:15:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:15:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:15:01 Message to Master queued w/err=0: serial=101122 error=0 09:15:06 Received message from Master: op=Filter serial=101123 09:15:06 Color wheel filter change from 0 to 0 09:15:06 FLIGetFilterPos err=0 currentPosition=0 09:15:06 FLIGetStepsRemaining err=0 RemainingSteps=0 09:15:06 Filter is already there-color wheel unchanged 09:15:06 Received message from Master: op=Shutter serial=101124 09:15:06 Shutter LASER close 09:15:06 Received message from Camera: op=State serial=101126 09:15:06 GetSingleValue result=40 Value=cccccccc 09:15:06 SkyScan query 09:15:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:15:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:06 Parameters OK 09:15:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:06 Set A/D data flow result=40 09:15:06 Set A/D channel type result=40 09:15:06 Set A/D encoding result=40 09:15:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:06 Set channel filter=0.000000e+000 result=40 09:15:06 Config A/D Result=40 09:15:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:06 Get A/D filter: -9.255963e+061 result=40 09:15:06 Get A/D value=-858993460 result=40 09:15:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:06 Parameters OK 09:15:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:06 Set A/D data flow result=40 09:15:06 Set A/D channel type result=40 09:15:06 Set A/D encoding result=40 09:15:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:06 Set channel filter=0.000000e+000 result=40 09:15:06 Config A/D Result=40 09:15:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:06 Get A/D filter: -9.255963e+061 result=40 09:15:06 Get A/D value=-858993460 result=40 09:15:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:15:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:15:06 Aux= 09:15:06 Message to Camera, serial 101126 queued 09:15:43 Received message from Master: op=PointingHead serial=101139 09:15:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:15:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:15:44 Point started: ret=0 09:15:44 point_skyscan result=0 09:15:44 Check angles 09:15:44 SkyScan query 09:15:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:15:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:15:45 Message to Master queued w/err=0: serial=101139 error=0 09:15:50 Received message from Master: op=Filter serial=101140 09:15:50 Color wheel filter change from 0 to 0 09:15:50 FLIGetFilterPos err=0 currentPosition=0 09:15:50 FLIGetStepsRemaining err=0 RemainingSteps=0 09:15:50 Filter is already there-color wheel unchanged 09:15:50 Received message from Master: op=Shutter serial=101141 09:15:50 Shutter LASER close 09:15:50 Received message from Camera: op=State serial=101143 09:15:50 GetSingleValue result=40 Value=cccccccc 09:15:50 SkyScan query 09:15:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:15:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:51 Parameters OK 09:15:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:51 Set A/D data flow result=40 09:15:51 Set A/D channel type result=40 09:15:51 Set A/D encoding result=40 09:15:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:51 Set channel filter=0.000000e+000 result=40 09:15:51 Config A/D Result=40 09:15:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:51 Get A/D filter: -9.255963e+061 result=40 09:15:51 Get A/D value=-858993460 result=40 09:15:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:51 Parameters OK 09:15:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:51 Set A/D data flow result=40 09:15:51 Set A/D channel type result=40 09:15:51 Set A/D encoding result=40 09:15:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:51 Set channel filter=0.000000e+000 result=40 09:15:51 Config A/D Result=40 09:15:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:51 Get A/D filter: -9.255963e+061 result=40 09:15:51 Get A/D value=-858993460 result=40 09:15:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:15:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:15:51 Aux= 09:15:51 Message to Camera, serial 101143 queued 09:16:27 Received message from Master: op=PointingHead serial=101156 09:16:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:16:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:16:28 Point started: ret=0 09:16:28 point_skyscan result=0 09:16:29 Check angles 09:16:29 SkyScan query 09:16:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 09:16:29 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 09:16:29 Check angles 09:16:29 SkyScan query 09:16:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.7<-14980 Statuses=0008 0009 09:16:30 Msec=750 True Az=112.995 Ze=-44.7 Az status=0008 Ze status=0009 09:16:30 Check angles 09:16:30 SkyScan query 09:16:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.655<-16377 Statuses=0008 0009 09:16:31 Msec=1500 True Az=112.995 Ze=-65.655 Az status=0008 Ze status=0009 09:16:31 Check angles 09:16:31 SkyScan query 09:16:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 09:16:31 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 09:16:32 Check angles 09:16:32 SkyScan query 09:16:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.565<-19171 Statuses=0008 0009 09:16:32 Msec=3000 True Az=112.995 Ze=-107.565 Az status=0008 Ze status=0009 09:16:32 Check angles 09:16:32 SkyScan query 09:16:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.97<-20598 Statuses=0008 0009 09:16:33 Msec=3750 True Az=112.995 Ze=-128.97 Az status=0008 Ze status=0009 09:16:33 Check angles 09:16:33 SkyScan query 09:16:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.94<-21996 Statuses=0008 0009 09:16:34 Msec=4500 True Az=112.995 Ze=-149.94 Az status=0008 Ze status=0009 09:16:34 Check angles 09:16:34 SkyScan query 09:16:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.805<-23387 Statuses=0008 0009 09:16:34 Msec=5250 True Az=112.995 Ze=-170.805 Az status=0008 Ze status=0009 09:16:35 Check angles 09:16:35 SkyScan query 09:16:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:16:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:16:35 Message to Master queued w/err=0: serial=101156 error=0 09:16:40 Received message from Master: op=Filter serial=101157 09:16:40 Color wheel filter change from 0 to 0 09:16:40 FLIGetFilterPos err=0 currentPosition=0 09:16:40 FLIGetStepsRemaining err=0 RemainingSteps=0 09:16:40 Filter is already there-color wheel unchanged 09:16:40 Received message from Master: op=Shutter serial=101158 09:16:40 Shutter LASER open 09:16:41 Received message from Camera: op=State serial=101160 09:16:41 GetSingleValue result=40 Value=cccccccc 09:16:41 SkyScan query 09:16:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:16:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:41 Parameters OK 09:16:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:41 Set A/D data flow result=40 09:16:41 Set A/D channel type result=40 09:16:41 Set A/D encoding result=40 09:16:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:41 Set channel filter=0.000000e+000 result=40 09:16:41 Config A/D Result=40 09:16:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:41 Get A/D filter: -9.255963e+061 result=40 09:16:41 Get A/D value=-858993460 result=40 09:16:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:41 Parameters OK 09:16:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:41 Set A/D data flow result=40 09:16:41 Set A/D channel type result=40 09:16:41 Set A/D encoding result=40 09:16:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:41 Set channel filter=0.000000e+000 result=40 09:16:41 Config A/D Result=40 09:16:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:41 Get A/D filter: -9.255963e+061 result=40 09:16:41 Get A/D value=-858993460 result=40 09:16:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:16:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:16:41 Aux= 09:16:41 Message to Camera, serial 101160 queued 09:16:49 Received message from Master: op=Shutter serial=101169 09:16:49 Shutter LASER close 09:16:49 Received message from Master: op=PointingHead serial=101173 09:16:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:16:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:16:50 Point started: ret=0 09:16:50 point_skyscan result=0 09:16:50 Check angles 09:16:50 SkyScan query 09:16:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.01<-21534 Statuses=0008 0009 09:16:51 Msec=0 True Az=112.995 Ze=-143.01 Az status=0008 Ze status=0009 09:16:51 Check angles 09:16:51 SkyScan query 09:16:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 09:16:52 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 09:16:52 Check angles 09:16:52 SkyScan query 09:16:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 09:16:52 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 09:16:53 Check angles 09:16:53 SkyScan query 09:16:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 09:16:53 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 09:16:53 Check angles 09:16:53 SkyScan query 09:16:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 09:16:54 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 09:16:54 Check angles 09:16:54 SkyScan query 09:16:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.175<-14545 Statuses=0008 0009 09:16:55 Msec=3750 True Az=112.995 Ze=-38.175 Az status=0008 Ze status=0009 09:16:55 Check angles 09:16:55 SkyScan query 09:16:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.25<-13150 Statuses=0008 0009 09:16:55 Msec=4500 True Az=112.995 Ze=-17.25 Az status=0008 Ze status=0009 09:16:56 Check angles 09:16:56 SkyScan query 09:16:56 SkyScan query done: ret=0 az=112.995<-7533 ze=4.125<-11725 Statuses=0008 0009 09:16:56 Msec=5250 True Az=112.995 Ze=4.125 Az status=0008 Ze status=0009 09:16:56 Check angles 09:16:56 SkyScan query 09:16:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:16:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:16:57 Message to Master queued w/err=0: serial=101173 error=0 09:17:02 Received message from Master: op=Filter serial=101174 09:17:02 Color wheel filter change from 0 to 0 09:17:02 FLIGetFilterPos err=0 currentPosition=0 09:17:02 FLIGetStepsRemaining err=0 RemainingSteps=0 09:17:02 Filter is already there-color wheel unchanged 09:17:02 Received message from Master: op=Shutter serial=101175 09:17:02 Shutter LASER close 09:17:02 Received message from Camera: op=State serial=101177 09:17:02 GetSingleValue result=40 Value=cccccccc 09:17:02 SkyScan query 09:17:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:17:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:03 Parameters OK 09:17:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:03 Set A/D data flow result=40 09:17:03 Set A/D channel type result=40 09:17:03 Set A/D encoding result=40 09:17:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:03 Set channel filter=0.000000e+000 result=40 09:17:03 Config A/D Result=40 09:17:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:03 Get A/D filter: -9.255963e+061 result=40 09:17:03 Get A/D value=-858993460 result=40 09:17:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:03 Parameters OK 09:17:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:03 Set A/D data flow result=40 09:17:03 Set A/D channel type result=40 09:17:03 Set A/D encoding result=40 09:17:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:03 Set channel filter=0.000000e+000 result=40 09:17:03 Config A/D Result=40 09:17:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:03 Get A/D filter: -9.255963e+061 result=40 09:17:03 Get A/D value=-858993460 result=40 09:17:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:17:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:17:03 Aux= 09:17:03 Message to Camera, serial 101177 queued 09:17:40 Received message from Master: op=PointingHead serial=101190 09:17:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:17:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:17:40 Point started: ret=0 09:17:40 point_skyscan result=0 09:17:41 Check angles 09:17:41 SkyScan query 09:17:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:17:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:17:41 Message to Master queued w/err=0: serial=101190 error=0 09:17:46 Received message from Master: op=Filter serial=101191 09:17:46 Color wheel filter change from 0 to 0 09:17:46 FLIGetFilterPos err=0 currentPosition=0 09:17:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:17:46 Filter is already there-color wheel unchanged 09:17:47 Received message from Master: op=Shutter serial=101192 09:17:47 Shutter LASER close 09:17:47 Received message from Camera: op=State serial=101194 09:17:47 GetSingleValue result=40 Value=cccccccc 09:17:47 SkyScan query 09:17:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:17:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:47 Parameters OK 09:17:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:47 Set A/D data flow result=40 09:17:47 Set A/D channel type result=40 09:17:47 Set A/D encoding result=40 09:17:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:47 Set channel filter=0.000000e+000 result=40 09:17:47 Config A/D Result=40 09:17:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:47 Get A/D filter: -9.255963e+061 result=40 09:17:47 Get A/D value=-858993460 result=40 09:17:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:47 Parameters OK 09:17:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:47 Set A/D data flow result=40 09:17:47 Set A/D channel type result=40 09:17:47 Set A/D encoding result=40 09:17:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:47 Set channel filter=0.000000e+000 result=40 09:17:47 Config A/D Result=40 09:17:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:47 Get A/D filter: -9.255963e+061 result=40 09:17:47 Get A/D value=-858993460 result=40 09:17:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:17:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:17:47 Aux= 09:17:47 Message to Camera, serial 101194 queued 09:18:24 Received message from Master: op=PointingHead serial=101207 09:18:24 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:18:24 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:18:24 Point started: ret=0 09:18:24 point_skyscan result=0 09:18:25 Check angles 09:18:25 SkyScan query 09:18:26 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 09:18:26 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 09:18:26 Check angles 09:18:26 SkyScan query 09:18:26 SkyScan query done: ret=0 az=153.72<-10248 ze=-6.495<-12433 Statuses=0009 0008 09:18:26 Msec=750 True Az=153.72 Ze=-6.495 Az status=0009 Ze status=0008 09:18:27 Check angles 09:18:27 SkyScan query 09:18:27 SkyScan query done: ret=0 az=171.18<-11412 ze=-6.495<-12433 Statuses=0009 0008 09:18:27 Msec=1500 True Az=171.18 Ze=-6.495 Az status=0009 Ze status=0008 09:18:27 Check angles 09:18:27 SkyScan query 09:18:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:18:28 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:18:28 Message to Master queued w/err=0: serial=101207 error=0 09:18:33 Received message from Master: op=Filter serial=101208 09:18:33 Color wheel filter change from 0 to 0 09:18:33 FLIGetFilterPos err=0 currentPosition=0 09:18:33 FLIGetStepsRemaining err=0 RemainingSteps=0 09:18:33 Filter is already there-color wheel unchanged 09:18:33 Received message from Master: op=Shutter serial=101209 09:18:33 Shutter LASER close 09:18:33 Received message from Camera: op=State serial=101211 09:18:33 GetSingleValue result=40 Value=cccccccc 09:18:33 SkyScan query 09:18:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:18:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:34 Parameters OK 09:18:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:34 Set A/D data flow result=40 09:18:34 Set A/D channel type result=40 09:18:34 Set A/D encoding result=40 09:18:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:34 Set channel filter=0.000000e+000 result=40 09:18:34 Config A/D Result=40 09:18:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:34 Get A/D filter: -9.255963e+061 result=40 09:18:34 Get A/D value=-858993460 result=40 09:18:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:34 Parameters OK 09:18:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:34 Set A/D data flow result=40 09:18:34 Set A/D channel type result=40 09:18:34 Set A/D encoding result=40 09:18:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:34 Set channel filter=0.000000e+000 result=40 09:18:34 Config A/D Result=40 09:18:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:34 Get A/D filter: -9.255963e+061 result=40 09:18:34 Get A/D value=-858993460 result=40 09:18:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:18:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:18:34 Aux= 09:18:34 Message to Camera, serial 101211 queued 09:19:11 Received message from Master: op=PointingHead serial=101224 09:19:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:19:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:19:11 Point started: ret=0 09:19:11 point_skyscan result=0 09:19:12 Check angles 09:19:12 SkyScan query 09:19:12 SkyScan query done: ret=0 az=153<-10200 ze=6.51<-11566 Statuses=0009 0008 09:19:12 Msec=0 True Az=153 Ze=6.51 Az status=0009 Ze status=0008 09:19:12 Check angles 09:19:12 SkyScan query 09:19:13 SkyScan query done: ret=0 az=135.525<-9035 ze=6.495<-11567 Statuses=0009 0008 09:19:13 Msec=750 True Az=135.525 Ze=6.495 Az status=0009 Ze status=0008 09:19:13 Check angles 09:19:13 SkyScan query 09:19:14 SkyScan query done: ret=0 az=117.63<-7842 ze=6.495<-11567 Statuses=0009 0008 09:19:14 Msec=1500 True Az=117.63 Ze=6.495 Az status=0009 Ze status=0008 09:19:14 Check angles 09:19:14 SkyScan query 09:19:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:19:14 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:19:14 Message to Master queued w/err=0: serial=101224 error=0 09:19:19 Received message from Master: op=Filter serial=101225 09:19:19 Color wheel filter change from 0 to 0 09:19:19 FLIGetFilterPos err=0 currentPosition=0 09:19:19 FLIGetStepsRemaining err=0 RemainingSteps=0 09:19:19 Filter is already there-color wheel unchanged 09:19:20 Received message from Master: op=Shutter serial=101226 09:19:20 Shutter LASER close 09:19:20 Received message from Camera: op=State serial=101228 09:19:20 GetSingleValue result=40 Value=cccccccc 09:19:20 SkyScan query 09:19:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:19:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:20 Parameters OK 09:19:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:20 Set A/D data flow result=40 09:19:20 Set A/D channel type result=40 09:19:20 Set A/D encoding result=40 09:19:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:20 Set channel filter=0.000000e+000 result=40 09:19:20 Config A/D Result=40 09:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:20 Get A/D filter: -9.255963e+061 result=40 09:19:20 Get A/D value=-858993460 result=40 09:19:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:20 Parameters OK 09:19:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:20 Set A/D data flow result=40 09:19:20 Set A/D channel type result=40 09:19:20 Set A/D encoding result=40 09:19:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:20 Set channel filter=0.000000e+000 result=40 09:19:20 Config A/D Result=40 09:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:20 Get A/D filter: -9.255963e+061 result=40 09:19:20 Get A/D value=-858993460 result=40 09:19:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:19:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:19:20 Aux= 09:19:20 Message to Camera, serial 101228 queued 09:19:57 Received message from Master: op=PointingHead serial=101241 09:19:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:19:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:19:57 Point started: ret=0 09:19:57 point_skyscan result=0 09:19:58 Check angles 09:19:58 SkyScan query 09:19:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 09:19:59 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 09:19:59 Check angles 09:19:59 SkyScan query 09:19:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.19<-14946 Statuses=0008 0009 09:19:59 Msec=750 True Az=112.995 Ze=-44.19 Az status=0008 Ze status=0009 09:20:00 Check angles 09:20:00 SkyScan query 09:20:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.1<-16340 Statuses=0008 0009 09:20:00 Msec=1500 True Az=112.995 Ze=-65.1 Az status=0008 Ze status=0009 09:20:00 Check angles 09:20:00 SkyScan query 09:20:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.445<-17763 Statuses=0008 0009 09:20:01 Msec=2250 True Az=112.995 Ze=-86.445 Az status=0008 Ze status=0009 09:20:01 Check angles 09:20:01 SkyScan query 09:20:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.88<-19192 Statuses=0008 0009 09:20:02 Msec=3000 True Az=112.995 Ze=-107.88 Az status=0008 Ze status=0009 09:20:02 Check angles 09:20:02 SkyScan query 09:20:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.82<-20588 Statuses=0008 0009 09:20:03 Msec=3750 True Az=112.995 Ze=-128.82 Az status=0008 Ze status=0009 09:20:03 Check angles 09:20:03 SkyScan query 09:20:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.225<-22015 Statuses=0008 0009 09:20:03 Msec=4500 True Az=112.995 Ze=-150.225 Az status=0008 Ze status=0009 09:20:03 Check angles 09:20:03 SkyScan query 09:20:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.345<-23423 Statuses=0008 0009 09:20:04 Msec=5250 True Az=112.995 Ze=-171.345 Az status=0008 Ze status=0009 09:20:04 Check angles 09:20:04 SkyScan query 09:20:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:20:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:20:05 Message to Master queued w/err=0: serial=101241 error=0 09:20:10 Received message from Master: op=Filter serial=101242 09:20:10 Color wheel filter change from 0 to 0 09:20:10 FLIGetFilterPos err=0 currentPosition=0 09:20:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:10 Filter is already there-color wheel unchanged 09:20:10 Received message from Master: op=Shutter serial=101243 09:20:10 Shutter LASER open 09:20:10 Received message from Camera: op=State serial=101245 09:20:10 GetSingleValue result=40 Value=cccccccc 09:20:10 SkyScan query 09:20:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:20:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:11 Parameters OK 09:20:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:11 Set A/D data flow result=40 09:20:11 Set A/D channel type result=40 09:20:11 Set A/D encoding result=40 09:20:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:11 Set channel filter=0.000000e+000 result=40 09:20:11 Config A/D Result=40 09:20:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:11 Get A/D filter: -9.255963e+061 result=40 09:20:11 Get A/D value=-858993460 result=40 09:20:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:11 Parameters OK 09:20:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:11 Set A/D data flow result=40 09:20:11 Set A/D channel type result=40 09:20:11 Set A/D encoding result=40 09:20:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:11 Set channel filter=0.000000e+000 result=40 09:20:11 Config A/D Result=40 09:20:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:11 Get A/D filter: -9.255963e+061 result=40 09:20:11 Get A/D value=-858993460 result=40 09:20:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:11 Aux= 09:20:11 Message to Camera, serial 101245 queued 09:20:19 Received message from Master: op=Shutter serial=101255 09:20:19 Shutter LASER close 09:20:20 Received message from Master: op=PointingHead serial=101259 09:20:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:20:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:20:20 Point started: ret=0 09:20:20 point_skyscan result=0 09:20:21 Check angles 09:20:21 SkyScan query 09:20:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.83<-21522 Statuses=0008 0009 09:20:21 Msec=0 True Az=112.995 Ze=-142.83 Az status=0008 Ze status=0009 09:20:21 Check angles 09:20:21 SkyScan query 09:20:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.815<-20121 Statuses=0008 0009 09:20:22 Msec=750 True Az=112.995 Ze=-121.815 Az status=0008 Ze status=0009 09:20:22 Check angles 09:20:22 SkyScan query 09:20:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 09:20:23 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 09:20:23 Check angles 09:20:23 SkyScan query 09:20:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.935<-17329 Statuses=0008 0009 09:20:24 Msec=2250 True Az=112.995 Ze=-79.935 Az status=0008 Ze status=0009 09:20:24 Check angles 09:20:24 SkyScan query 09:20:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.995<-15933 Statuses=0008 0009 09:20:24 Msec=3000 True Az=112.995 Ze=-58.995 Az status=0008 Ze status=0009 09:20:24 Check angles 09:20:24 SkyScan query 09:20:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.98<-14532 Statuses=0008 0009 09:20:25 Msec=3750 True Az=112.995 Ze=-37.98 Az status=0008 Ze status=0009 09:20:25 Check angles 09:20:25 SkyScan query 09:20:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.055<-13137 Statuses=0008 0009 09:20:26 Msec=4500 True Az=112.995 Ze=-17.055 Az status=0008 Ze status=0009 09:20:26 Check angles 09:20:26 SkyScan query 09:20:27 SkyScan query done: ret=0 az=112.995<-7533 ze=3.915<-11739 Statuses=0008 0009 09:20:27 Msec=5250 True Az=112.995 Ze=3.915 Az status=0008 Ze status=0009 09:20:27 Check angles 09:20:27 SkyScan query 09:20:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:20:27 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:20:27 Message to Master queued w/err=0: serial=101259 error=0 09:20:32 Received message from Master: op=Filter serial=101260 09:20:32 Color wheel filter change from 0 to 0 09:20:32 FLIGetFilterPos err=0 currentPosition=0 09:20:32 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:32 Filter is already there-color wheel unchanged 09:20:32 Received message from Master: op=Shutter serial=101261 09:20:32 Shutter LASER close 09:20:33 Received message from Camera: op=State serial=101263 09:20:33 GetSingleValue result=40 Value=cccccccc 09:20:33 SkyScan query 09:20:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:20:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:33 Parameters OK 09:20:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:33 Set A/D data flow result=40 09:20:33 Set A/D channel type result=40 09:20:33 Set A/D encoding result=40 09:20:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:33 Set channel filter=0.000000e+000 result=40 09:20:33 Config A/D Result=40 09:20:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:33 Get A/D filter: -9.255963e+061 result=40 09:20:33 Get A/D value=-858993460 result=40 09:20:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:33 Parameters OK 09:20:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:33 Set A/D data flow result=40 09:20:33 Set A/D channel type result=40 09:20:33 Set A/D encoding result=40 09:20:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:33 Set channel filter=0.000000e+000 result=40 09:20:33 Config A/D Result=40 09:20:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:33 Get A/D filter: -9.255963e+061 result=40 09:20:33 Get A/D value=-858993460 result=40 09:20:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:33 Aux= 09:20:33 Message to Camera, serial 101263 queued 09:21:10 Received message from Master: op=PointingHead serial=101276 09:21:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:21:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:21:10 Point started: ret=0 09:21:10 point_skyscan result=0 09:21:11 Check angles 09:21:11 SkyScan query 09:21:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:21:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:21:12 Message to Master queued w/err=0: serial=101276 error=0 09:21:17 Received message from Master: op=Filter serial=101277 09:21:17 Color wheel filter change from 0 to 0 09:21:17 FLIGetFilterPos err=0 currentPosition=0 09:21:17 FLIGetStepsRemaining err=0 RemainingSteps=0 09:21:17 Filter is already there-color wheel unchanged 09:21:17 Received message from Master: op=Shutter serial=101278 09:21:17 Shutter LASER close 09:21:17 Received message from Camera: op=State serial=101280 09:21:17 GetSingleValue result=40 Value=cccccccc 09:21:17 SkyScan query 09:21:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:21:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:18 Parameters OK 09:21:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:18 Set A/D data flow result=40 09:21:18 Set A/D channel type result=40 09:21:18 Set A/D encoding result=40 09:21:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:18 Set channel filter=0.000000e+000 result=40 09:21:18 Config A/D Result=40 09:21:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:18 Get A/D filter: -9.255963e+061 result=40 09:21:18 Get A/D value=-858993460 result=40 09:21:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:18 Parameters OK 09:21:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:18 Set A/D data flow result=40 09:21:18 Set A/D channel type result=40 09:21:18 Set A/D encoding result=40 09:21:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:18 Set channel filter=0.000000e+000 result=40 09:21:18 Config A/D Result=40 09:21:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:18 Get A/D filter: -9.255963e+061 result=40 09:21:18 Get A/D value=-858993460 result=40 09:21:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:21:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:21:18 Aux= 09:21:18 Message to Camera, serial 101280 queued 09:21:54 Received message from Master: op=PointingHead serial=101293 09:21:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:21:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:21:55 Point started: ret=0 09:21:55 point_skyscan result=0 09:21:56 Check angles 09:21:56 SkyScan query 09:21:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:21:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:21:56 Message to Master queued w/err=0: serial=101293 error=0 09:22:01 Received message from Master: op=Filter serial=101294 09:22:01 Color wheel filter change from 0 to 0 09:22:01 FLIGetFilterPos err=0 currentPosition=0 09:22:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:22:01 Filter is already there-color wheel unchanged 09:22:01 Received message from Master: op=Shutter serial=101295 09:22:01 Shutter LASER close 09:22:01 Received message from Camera: op=State serial=101297 09:22:01 GetSingleValue result=40 Value=cccccccc 09:22:01 SkyScan query 09:22:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:22:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:02 Parameters OK 09:22:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:02 Set A/D data flow result=40 09:22:02 Set A/D channel type result=40 09:22:02 Set A/D encoding result=40 09:22:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:02 Set channel filter=0.000000e+000 result=40 09:22:02 Config A/D Result=40 09:22:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:02 Get A/D filter: -9.255963e+061 result=40 09:22:02 Get A/D value=-858993460 result=40 09:22:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:02 Parameters OK 09:22:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:02 Set A/D data flow result=40 09:22:02 Set A/D channel type result=40 09:22:02 Set A/D encoding result=40 09:22:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:02 Set channel filter=0.000000e+000 result=40 09:22:02 Config A/D Result=40 09:22:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:02 Get A/D filter: -9.255963e+061 result=40 09:22:02 Get A/D value=-858993460 result=40 09:22:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:02 Aux= 09:22:02 Message to Camera, serial 101297 queued 09:22:39 Received message from Master: op=PointingHead serial=101310 09:22:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:22:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:22:39 Point started: ret=0 09:22:39 point_skyscan result=0 09:22:40 Check angles 09:22:40 SkyScan query 09:22:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:22:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:22:40 Message to Master queued w/err=0: serial=101310 error=0 09:22:45 Received message from Master: op=Filter serial=101311 09:22:45 Color wheel filter change from 0 to 0 09:22:45 FLIGetFilterPos err=0 currentPosition=0 09:22:45 FLIGetStepsRemaining err=0 RemainingSteps=0 09:22:45 Filter is already there-color wheel unchanged 09:22:46 Received message from Master: op=Shutter serial=101312 09:22:46 Shutter LASER close 09:22:46 Received message from Camera: op=State serial=101314 09:22:46 GetSingleValue result=40 Value=cccccccc 09:22:46 SkyScan query 09:22:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:22:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:46 Parameters OK 09:22:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:46 Set A/D data flow result=40 09:22:46 Set A/D channel type result=40 09:22:46 Set A/D encoding result=40 09:22:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:46 Set channel filter=0.000000e+000 result=40 09:22:46 Config A/D Result=40 09:22:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:46 Get A/D filter: -9.255963e+061 result=40 09:22:46 Get A/D value=-858993460 result=40 09:22:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:46 Parameters OK 09:22:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:46 Set A/D data flow result=40 09:22:46 Set A/D channel type result=40 09:22:46 Set A/D encoding result=40 09:22:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:46 Set channel filter=0.000000e+000 result=40 09:22:46 Config A/D Result=40 09:22:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:46 Get A/D filter: -9.255963e+061 result=40 09:22:46 Get A/D value=-858993460 result=40 09:22:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:46 Aux= 09:22:46 Message to Camera, serial 101314 queued 09:23:23 Received message from Master: op=PointingHead serial=101327 09:23:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:23:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:23:23 Point started: ret=0 09:23:23 point_skyscan result=0 09:23:24 Check angles 09:23:24 SkyScan query 09:23:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.865<-13591 Statuses=0008 0009 09:23:25 Msec=0 True Az=112.995 Ze=-23.865 Az status=0008 Ze status=0009 09:23:25 Check angles 09:23:25 SkyScan query 09:23:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 09:23:25 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 09:23:26 Check angles 09:23:26 SkyScan query 09:23:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.745<-16383 Statuses=0008 0009 09:23:26 Msec=1500 True Az=112.995 Ze=-65.745 Az status=0008 Ze status=0009 09:23:26 Check angles 09:23:26 SkyScan query 09:23:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 09:23:27 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 09:23:27 Check angles 09:23:27 SkyScan query 09:23:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.655<-19177 Statuses=0008 0009 09:23:28 Msec=3000 True Az=112.995 Ze=-107.655 Az status=0008 Ze status=0009 09:23:28 Check angles 09:23:28 SkyScan query 09:23:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.61<-20574 Statuses=0008 0009 09:23:28 Msec=3750 True Az=112.995 Ze=-128.61 Az status=0008 Ze status=0009 09:23:29 Check angles 09:23:29 SkyScan query 09:23:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.595<-21973 Statuses=0008 0009 09:23:29 Msec=4500 True Az=112.995 Ze=-149.595 Az status=0008 Ze status=0009 09:23:29 Check angles 09:23:29 SkyScan query 09:23:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.505<-23367 Statuses=0008 0009 09:23:30 Msec=5250 True Az=112.995 Ze=-170.505 Az status=0008 Ze status=0009 09:23:30 Check angles 09:23:30 SkyScan query 09:23:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:23:31 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:23:31 Message to Master queued w/err=0: serial=101327 error=0 09:23:36 Received message from Master: op=Filter serial=101328 09:23:36 Color wheel filter change from 0 to 0 09:23:36 FLIGetFilterPos err=0 currentPosition=0 09:23:36 FLIGetStepsRemaining err=0 RemainingSteps=0 09:23:36 Filter is already there-color wheel unchanged 09:23:36 Received message from Master: op=Shutter serial=101329 09:23:36 Shutter LASER open 09:23:36 Received message from Camera: op=State serial=101331 09:23:36 GetSingleValue result=40 Value=cccccccc 09:23:36 SkyScan query 09:23:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:23:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:37 Parameters OK 09:23:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:37 Set A/D data flow result=40 09:23:37 Set A/D channel type result=40 09:23:37 Set A/D encoding result=40 09:23:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:37 Set channel filter=0.000000e+000 result=40 09:23:37 Config A/D Result=40 09:23:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:37 Get A/D filter: -9.255963e+061 result=40 09:23:37 Get A/D value=-858993460 result=40 09:23:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:37 Parameters OK 09:23:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:37 Set A/D data flow result=40 09:23:37 Set A/D channel type result=40 09:23:37 Set A/D encoding result=40 09:23:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:37 Set channel filter=0.000000e+000 result=40 09:23:37 Config A/D Result=40 09:23:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:37 Get A/D filter: -9.255963e+061 result=40 09:23:37 Get A/D value=-858993460 result=40 09:23:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:23:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:23:37 Aux= 09:23:37 Message to Camera, serial 101331 queued 09:23:44 Received message from Master: op=Shutter serial=101340 09:23:44 Shutter LASER close 09:23:45 Received message from Master: op=PointingHead serial=101344 09:23:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:23:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:23:45 Point started: ret=0 09:23:45 point_skyscan result=0 09:23:46 Check angles 09:23:46 SkyScan query 09:23:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 09:23:46 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 09:23:47 Check angles 09:23:47 SkyScan query 09:23:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 09:23:47 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 09:23:47 Check angles 09:23:47 SkyScan query 09:23:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 09:23:48 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 09:23:48 Check angles 09:23:48 SkyScan query 09:23:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 09:23:49 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 09:23:49 Check angles 09:23:49 SkyScan query 09:23:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 09:23:49 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 09:23:50 Check angles 09:23:50 SkyScan query 09:23:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.755<-14517 Statuses=0008 0009 09:23:50 Msec=3750 True Az=112.995 Ze=-37.755 Az status=0008 Ze status=0009 [UTC 2019-3-4 09:23:50] 09:23:50 Check angles 09:23:50 SkyScan query 09:23:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.8<-13120 Statuses=0008 0009 09:23:51 Msec=4500 True Az=112.995 Ze=-16.8 Az status=0008 Ze status=0009 09:23:51 Check angles 09:23:51 SkyScan query 09:23:52 SkyScan query done: ret=0 az=112.995<-7533 ze=4.44<-11704 Statuses=0008 0009 09:23:52 Msec=5250 True Az=112.995 Ze=4.44 Az status=0008 Ze status=0009 09:23:52 Check angles 09:23:52 SkyScan query 09:23:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:23:52 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:23:52 Message to Master queued w/err=0: serial=101344 error=0 09:23:57 Received message from Master: op=Filter serial=101345 09:23:57 Color wheel filter change from 0 to 0 09:23:57 FLIGetFilterPos err=0 currentPosition=0 09:23:57 FLIGetStepsRemaining err=0 RemainingSteps=0 09:23:57 Filter is already there-color wheel unchanged 09:23:58 Received message from Master: op=Shutter serial=101346 09:23:58 Shutter LASER close 09:23:58 Received message from Camera: op=State serial=101348 09:23:58 GetSingleValue result=40 Value=cccccccc 09:23:58 SkyScan query 09:23:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:23:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:58 Parameters OK 09:23:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:58 Set A/D data flow result=40 09:23:58 Set A/D channel type result=40 09:23:58 Set A/D encoding result=40 09:23:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:58 Set channel filter=0.000000e+000 result=40 09:23:58 Config A/D Result=40 09:23:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:58 Get A/D filter: -9.255963e+061 result=40 09:23:58 Get A/D value=-858993460 result=40 09:23:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:58 Parameters OK 09:23:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:58 Set A/D data flow result=40 09:23:58 Set A/D channel type result=40 09:23:58 Set A/D encoding result=40 09:23:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:58 Set channel filter=0.000000e+000 result=40 09:23:58 Config A/D Result=40 09:23:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:58 Get A/D filter: -9.255963e+061 result=40 09:23:58 Get A/D value=-858993460 result=40 09:23:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:23:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:23:58 Aux= 09:23:58 Message to Camera, serial 101348 queued 09:24:35 Received message from Master: op=PointingHead serial=101361 09:24:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:24:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:24:35 Point started: ret=0 09:24:35 point_skyscan result=0 09:24:36 Check angles 09:24:36 SkyScan query 09:24:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:24:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:24:37 Message to Master queued w/err=0: serial=101361 error=0 09:24:42 Received message from Master: op=Filter serial=101362 09:24:42 Color wheel filter change from 0 to 0 09:24:42 FLIGetFilterPos err=0 currentPosition=0 09:24:42 FLIGetStepsRemaining err=0 RemainingSteps=0 09:24:42 Filter is already there-color wheel unchanged 09:24:42 Received message from Master: op=Shutter serial=101363 09:24:42 Shutter LASER close 09:24:42 Received message from Camera: op=State serial=101365 09:24:42 GetSingleValue result=40 Value=cccccccc 09:24:42 SkyScan query 09:24:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:24:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:43 Parameters OK 09:24:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:43 Set A/D data flow result=40 09:24:43 Set A/D channel type result=40 09:24:43 Set A/D encoding result=40 09:24:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:43 Set channel filter=0.000000e+000 result=40 09:24:43 Config A/D Result=40 09:24:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:43 Get A/D filter: -9.255963e+061 result=40 09:24:43 Get A/D value=-858993460 result=40 09:24:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:43 Parameters OK 09:24:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:43 Set A/D data flow result=40 09:24:43 Set A/D channel type result=40 09:24:43 Set A/D encoding result=40 09:24:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:43 Set channel filter=0.000000e+000 result=40 09:24:43 Config A/D Result=40 09:24:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:43 Get A/D filter: -9.255963e+061 result=40 09:24:43 Get A/D value=-858993460 result=40 09:24:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:24:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:24:43 Aux= 09:24:43 Message to Camera, serial 101365 queued 09:25:19 Received message from Master: op=PointingHead serial=101378 09:25:19 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:25:19 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:25:20 Point started: ret=0 09:25:20 point_skyscan result=0 09:25:21 Check angles 09:25:21 SkyScan query 09:25:21 SkyScan query done: ret=0 az=135.705<-9047 ze=-6.51<-12434 Statuses=0009 0008 09:25:21 Msec=0 True Az=135.705 Ze=-6.51 Az status=0009 Ze status=0008 09:25:21 Check angles 09:25:21 SkyScan query 09:25:22 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.51<-12434 Statuses=0009 0008 09:25:22 Msec=750 True Az=153.525 Ze=-6.51 Az status=0009 Ze status=0008 09:25:22 Check angles 09:25:22 SkyScan query 09:25:23 SkyScan query done: ret=0 az=171.015<-11401 ze=-6.495<-12433 Statuses=0009 0008 09:25:23 Msec=1500 True Az=171.015 Ze=-6.495 Az status=0009 Ze status=0008 09:25:23 Check angles 09:25:23 SkyScan query 09:25:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:25:23 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:25:23 Message to Master queued w/err=0: serial=101378 error=0 09:25:28 Received message from Master: op=Filter serial=101379 09:25:28 Color wheel filter change from 0 to 0 09:25:28 FLIGetFilterPos err=0 currentPosition=0 09:25:28 FLIGetStepsRemaining err=0 RemainingSteps=0 09:25:28 Filter is already there-color wheel unchanged 09:25:29 Received message from Master: op=Shutter serial=101380 09:25:29 Shutter LASER close 09:25:29 Received message from Camera: op=State serial=101382 09:25:29 GetSingleValue result=40 Value=cccccccc 09:25:29 SkyScan query 09:25:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:25:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:29 Parameters OK 09:25:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:29 Set A/D data flow result=40 09:25:29 Set A/D channel type result=40 09:25:29 Set A/D encoding result=40 09:25:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:29 Set channel filter=0.000000e+000 result=40 09:25:29 Config A/D Result=40 09:25:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:29 Get A/D filter: -9.255963e+061 result=40 09:25:29 Get A/D value=-858993460 result=40 09:25:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:29 Parameters OK 09:25:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:29 Set A/D data flow result=40 09:25:29 Set A/D channel type result=40 09:25:29 Set A/D encoding result=40 09:25:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:29 Set channel filter=0.000000e+000 result=40 09:25:29 Config A/D Result=40 09:25:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:29 Get A/D filter: -9.255963e+061 result=40 09:25:29 Get A/D value=-858993460 result=40 09:25:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:25:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:25:29 Aux= 09:25:29 Message to Camera, serial 101382 queued 09:26:06 Received message from Master: op=PointingHead serial=101395 09:26:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:26:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:26:06 Point started: ret=0 09:26:06 point_skyscan result=0 09:26:07 Check angles 09:26:07 SkyScan query 09:26:08 SkyScan query done: ret=0 az=152.88<-10192 ze=6.51<-11566 Statuses=0009 0008 09:26:08 Msec=0 True Az=152.88 Ze=6.51 Az status=0009 Ze status=0008 09:26:08 Check angles 09:26:08 SkyScan query 09:26:08 SkyScan query done: ret=0 az=135.48<-9032 ze=6.495<-11567 Statuses=0009 0008 09:26:08 Msec=750 True Az=135.48 Ze=6.495 Az status=0009 Ze status=0008 09:26:09 Check angles 09:26:09 SkyScan query 09:26:09 SkyScan query done: ret=0 az=118.005<-7867 ze=6.495<-11567 Statuses=0009 0008 09:26:09 Msec=1500 True Az=118.005 Ze=6.495 Az status=0009 Ze status=0008 09:26:09 Check angles 09:26:09 SkyScan query 09:26:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:26:10 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:26:10 Message to Master queued w/err=0: serial=101395 error=0 09:26:15 Received message from Master: op=Filter serial=101396 09:26:15 Color wheel filter change from 0 to 0 09:26:15 FLIGetFilterPos err=0 currentPosition=0 09:26:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:26:15 Filter is already there-color wheel unchanged 09:26:15 Received message from Master: op=Shutter serial=101397 09:26:15 Shutter LASER close 09:26:15 Received message from Camera: op=State serial=101399 09:26:15 GetSingleValue result=40 Value=cccccccc 09:26:15 SkyScan query 09:26:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:26:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:16 Parameters OK 09:26:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:16 Set A/D data flow result=40 09:26:16 Set A/D channel type result=40 09:26:16 Set A/D encoding result=40 09:26:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:16 Set channel filter=0.000000e+000 result=40 09:26:16 Config A/D Result=40 09:26:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:16 Get A/D filter: -9.255963e+061 result=40 09:26:16 Get A/D value=-858993460 result=40 09:26:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:16 Parameters OK 09:26:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:16 Set A/D data flow result=40 09:26:16 Set A/D channel type result=40 09:26:16 Set A/D encoding result=40 09:26:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:16 Set channel filter=0.000000e+000 result=40 09:26:16 Config A/D Result=40 09:26:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:16 Get A/D filter: -9.255963e+061 result=40 09:26:16 Get A/D value=-858993460 result=40 09:26:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:26:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:26:16 Aux= 09:26:16 Message to Camera, serial 101399 queued 09:26:53 Received message from Master: op=PointingHead serial=101412 09:26:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:26:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:26:53 Point started: ret=0 09:26:53 point_skyscan result=0 09:26:54 Check angles 09:26:54 SkyScan query 09:26:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 09:26:54 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 09:26:54 Check angles 09:26:54 SkyScan query 09:26:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.16<-14944 Statuses=0008 0009 09:26:55 Msec=750 True Az=112.995 Ze=-44.16 Az status=0008 Ze status=0009 09:26:55 Check angles 09:26:55 SkyScan query 09:26:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.07<-16338 Statuses=0008 0009 09:26:56 Msec=1500 True Az=112.995 Ze=-65.07 Az status=0008 Ze status=0009 09:26:56 Check angles 09:26:56 SkyScan query 09:26:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.025<-17735 Statuses=0008 0009 09:26:57 Msec=2250 True Az=112.995 Ze=-86.025 Az status=0008 Ze status=0009 09:26:57 Check angles 09:26:57 SkyScan query 09:26:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.95<-19130 Statuses=0008 0009 09:26:57 Msec=3000 True Az=112.995 Ze=-106.95 Az status=0008 Ze status=0009 09:26:57 Check angles 09:26:57 SkyScan query 09:26:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.325<-20555 Statuses=0008 0009 09:26:58 Msec=3750 True Az=112.995 Ze=-128.325 Az status=0008 Ze status=0009 09:26:58 Check angles 09:26:58 SkyScan query 09:26:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.325<-21955 Statuses=0008 0009 09:26:59 Msec=4500 True Az=112.995 Ze=-149.325 Az status=0008 Ze status=0009 09:26:59 Check angles 09:26:59 SkyScan query 09:27:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.25<-23350 Statuses=0008 0009 09:27:00 Msec=5250 True Az=112.995 Ze=-170.25 Az status=0008 Ze status=0009 09:27:00 Check angles 09:27:00 SkyScan query 09:27:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:27:00 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:27:00 Message to Master queued w/err=0: serial=101412 error=0 09:27:05 Received message from Master: op=Filter serial=101413 09:27:05 Color wheel filter change from 0 to 0 09:27:05 FLIGetFilterPos err=0 currentPosition=0 09:27:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:05 Filter is already there-color wheel unchanged 09:27:05 Received message from Master: op=Shutter serial=101414 09:27:05 Shutter LASER open 09:27:06 Received message from Camera: op=State serial=101416 09:27:06 GetSingleValue result=40 Value=cccccccc 09:27:06 SkyScan query 09:27:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:27:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:06 Parameters OK 09:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:06 Set A/D data flow result=40 09:27:06 Set A/D channel type result=40 09:27:06 Set A/D encoding result=40 09:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:06 Set channel filter=0.000000e+000 result=40 09:27:06 Config A/D Result=40 09:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:06 Get A/D filter: -9.255963e+061 result=40 09:27:06 Get A/D value=-858993460 result=40 09:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:06 Parameters OK 09:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:06 Set A/D data flow result=40 09:27:06 Set A/D channel type result=40 09:27:06 Set A/D encoding result=40 09:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:06 Set channel filter=0.000000e+000 result=40 09:27:06 Config A/D Result=40 09:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:06 Get A/D filter: -9.255963e+061 result=40 09:27:06 Get A/D value=-858993460 result=40 09:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:06 Aux= 09:27:06 Message to Camera, serial 101416 queued 09:27:15 Received message from Master: op=Shutter serial=101426 09:27:15 Shutter LASER close 09:27:15 Received message from Master: op=PointingHead serial=101430 09:27:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:27:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:27:15 Point started: ret=0 09:27:15 point_skyscan result=0 09:27:16 Check angles 09:27:16 SkyScan query 09:27:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.755<-21517 Statuses=0008 0009 09:27:17 Msec=0 True Az=112.995 Ze=-142.755 Az status=0008 Ze status=0009 09:27:17 Check angles 09:27:17 SkyScan query 09:27:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.755<-20117 Statuses=0008 0009 09:27:18 Msec=750 True Az=112.995 Ze=-121.755 Az status=0008 Ze status=0009 09:27:18 Check angles 09:27:18 SkyScan query 09:27:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.845<-18723 Statuses=0008 0009 09:27:18 Msec=1500 True Az=112.995 Ze=-100.845 Az status=0008 Ze status=0009 09:27:18 Check angles 09:27:18 SkyScan query 09:27:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.875<-17325 Statuses=0008 0009 09:27:19 Msec=2250 True Az=112.995 Ze=-79.875 Az status=0008 Ze status=0009 09:27:19 Check angles 09:27:19 SkyScan query 09:27:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.935<-15929 Statuses=0008 0009 09:27:20 Msec=3000 True Az=112.995 Ze=-58.935 Az status=0008 Ze status=0009 09:27:20 Check angles 09:27:20 SkyScan query 09:27:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.92<-14528 Statuses=0008 0009 09:27:21 Msec=3750 True Az=112.995 Ze=-37.92 Az status=0008 Ze status=0009 09:27:21 Check angles 09:27:21 SkyScan query 09:27:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.995<-13133 Statuses=0008 0009 09:27:21 Msec=4500 True Az=112.995 Ze=-16.995 Az status=0008 Ze status=0009 09:27:21 Check angles 09:27:21 SkyScan query 09:27:22 SkyScan query done: ret=0 az=112.995<-7533 ze=3.96<-11736 Statuses=0008 0009 09:27:22 Msec=5250 True Az=112.995 Ze=3.96 Az status=0008 Ze status=0009 09:27:22 Check angles 09:27:22 SkyScan query 09:27:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:27:23 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:27:23 Message to Master queued w/err=0: serial=101430 error=0 09:27:28 Received message from Master: op=Filter serial=101431 09:27:28 Color wheel filter change from 0 to 0 09:27:28 FLIGetFilterPos err=0 currentPosition=0 09:27:28 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:28 Filter is already there-color wheel unchanged 09:27:28 Received message from Master: op=Shutter serial=101432 09:27:28 Shutter LASER close 09:27:28 Received message from Camera: op=State serial=101434 09:27:28 GetSingleValue result=40 Value=cccccccc 09:27:28 SkyScan query 09:27:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:27:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:29 Parameters OK 09:27:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:29 Set A/D data flow result=40 09:27:29 Set A/D channel type result=40 09:27:29 Set A/D encoding result=40 09:27:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:29 Set channel filter=0.000000e+000 result=40 09:27:29 Config A/D Result=40 09:27:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:29 Get A/D filter: -9.255963e+061 result=40 09:27:29 Get A/D value=-858993460 result=40 09:27:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:29 Parameters OK 09:27:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:29 Set A/D data flow result=40 09:27:29 Set A/D channel type result=40 09:27:29 Set A/D encoding result=40 09:27:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:29 Set channel filter=0.000000e+000 result=40 09:27:29 Config A/D Result=40 09:27:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:29 Get A/D filter: -9.255963e+061 result=40 09:27:29 Get A/D value=-858993460 result=40 09:27:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:29 Aux= 09:27:29 Message to Camera, serial 101434 queued 09:28:06 Received message from Master: op=PointingHead serial=101447 09:28:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:28:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:28:06 Point started: ret=0 09:28:06 point_skyscan result=0 09:28:07 Check angles 09:28:07 SkyScan query 09:28:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:28:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:28:07 Message to Master queued w/err=0: serial=101447 error=0 09:28:12 Received message from Master: op=Filter serial=101448 09:28:12 Color wheel filter change from 0 to 0 09:28:12 FLIGetFilterPos err=0 currentPosition=0 09:28:12 FLIGetStepsRemaining err=0 RemainingSteps=0 09:28:12 Filter is already there-color wheel unchanged 09:28:12 Received message from Master: op=Shutter serial=101449 09:28:12 Shutter LASER close 09:28:12 Received message from Camera: op=State serial=101451 09:28:12 GetSingleValue result=40 Value=cccccccc 09:28:12 SkyScan query 09:28:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:28:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:13 Parameters OK 09:28:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:13 Set A/D data flow result=40 09:28:13 Set A/D channel type result=40 09:28:13 Set A/D encoding result=40 09:28:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:13 Set channel filter=0.000000e+000 result=40 09:28:13 Config A/D Result=40 09:28:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:13 Get A/D filter: -9.255963e+061 result=40 09:28:13 Get A/D value=-858993460 result=40 09:28:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:13 Parameters OK 09:28:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:13 Set A/D data flow result=40 09:28:13 Set A/D channel type result=40 09:28:13 Set A/D encoding result=40 09:28:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:13 Set channel filter=0.000000e+000 result=40 09:28:13 Config A/D Result=40 09:28:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:13 Get A/D filter: -9.255963e+061 result=40 09:28:13 Get A/D value=-858993460 result=40 09:28:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:28:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:28:13 Aux= 09:28:13 Message to Camera, serial 101451 queued 09:28:50 Received message from Master: op=PointingHead serial=101464 09:28:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:28:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:28:50 Point started: ret=0 09:28:50 point_skyscan result=0 09:28:51 Check angles 09:28:51 SkyScan query 09:28:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:28:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:28:51 Message to Master queued w/err=0: serial=101464 error=0 09:28:56 Received message from Master: op=Filter serial=101465 09:28:56 Color wheel filter change from 0 to 0 09:28:56 FLIGetFilterPos err=0 currentPosition=0 09:28:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:28:56 Filter is already there-color wheel unchanged 09:28:57 Received message from Master: op=Shutter serial=101466 09:28:57 Shutter LASER close 09:28:57 Received message from Camera: op=State serial=101468 09:28:57 GetSingleValue result=40 Value=cccccccc 09:28:57 SkyScan query 09:28:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:28:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:57 Parameters OK 09:28:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:57 Set A/D data flow result=40 09:28:57 Set A/D channel type result=40 09:28:57 Set A/D encoding result=40 09:28:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:57 Set channel filter=0.000000e+000 result=40 09:28:57 Config A/D Result=40 09:28:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:57 Get A/D filter: -9.255963e+061 result=40 09:28:57 Get A/D value=-858993460 result=40 09:28:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:57 Parameters OK 09:28:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:57 Set A/D data flow result=40 09:28:57 Set A/D channel type result=40 09:28:57 Set A/D encoding result=40 09:28:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:57 Set channel filter=0.000000e+000 result=40 09:28:57 Config A/D Result=40 09:28:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:57 Get A/D filter: -9.255963e+061 result=40 09:28:57 Get A/D value=-858993460 result=40 09:28:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:28:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:28:57 Aux= 09:28:57 Message to Camera, serial 101468 queued 09:29:34 Received message from Master: op=PointingHead serial=101481 09:29:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:29:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:29:34 Point started: ret=0 09:29:34 point_skyscan result=0 09:29:35 Check angles 09:29:35 SkyScan query 09:29:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:29:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:29:36 Message to Master queued w/err=0: serial=101481 error=0 09:29:41 Received message from Master: op=Filter serial=101482 09:29:41 Color wheel filter change from 0 to 0 09:29:41 FLIGetFilterPos err=0 currentPosition=0 09:29:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:29:41 Filter is already there-color wheel unchanged 09:29:41 Received message from Master: op=Shutter serial=101483 09:29:41 Shutter LASER close 09:29:41 Received message from Camera: op=State serial=101485 09:29:41 GetSingleValue result=40 Value=cccccccc 09:29:41 SkyScan query 09:29:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:29:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:42 Parameters OK 09:29:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:42 Set A/D data flow result=40 09:29:42 Set A/D channel type result=40 09:29:42 Set A/D encoding result=40 09:29:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:42 Set channel filter=0.000000e+000 result=40 09:29:42 Config A/D Result=40 09:29:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:42 Get A/D filter: -9.255963e+061 result=40 09:29:42 Get A/D value=-858993460 result=40 09:29:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:42 Parameters OK 09:29:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:42 Set A/D data flow result=40 09:29:42 Set A/D channel type result=40 09:29:42 Set A/D encoding result=40 09:29:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:42 Set channel filter=0.000000e+000 result=40 09:29:42 Config A/D Result=40 09:29:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:42 Get A/D filter: -9.255963e+061 result=40 09:29:42 Get A/D value=-858993460 result=40 09:29:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:29:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:29:42 Aux= 09:29:42 Message to Camera, serial 101485 queued 09:30:18 Received message from Master: op=PointingHead serial=101498 09:30:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:30:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:30:19 Point started: ret=0 09:30:19 point_skyscan result=0 09:30:19 Check angles 09:30:19 SkyScan query 09:30:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.04<-13536 Statuses=0008 0009 09:30:20 Msec=0 True Az=112.995 Ze=-23.04 Az status=0008 Ze status=0009 09:30:20 Check angles 09:30:20 SkyScan query 09:30:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.055<-14937 Statuses=0008 0009 09:30:21 Msec=750 True Az=112.995 Ze=-44.055 Az status=0008 Ze status=0009 09:30:21 Check angles 09:30:21 SkyScan query 09:30:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.98<-16332 Statuses=0008 0009 09:30:22 Msec=1500 True Az=112.995 Ze=-64.98 Az status=0008 Ze status=0009 09:30:22 Check angles 09:30:22 SkyScan query 09:30:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.95<-17730 Statuses=0008 0009 09:30:22 Msec=2250 True Az=112.995 Ze=-85.95 Az status=0008 Ze status=0009 09:30:22 Check angles 09:30:22 SkyScan query 09:30:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.875<-19125 Statuses=0008 0009 09:30:23 Msec=3000 True Az=112.995 Ze=-106.875 Az status=0008 Ze status=0009 09:30:23 Check angles 09:30:23 SkyScan query 09:30:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.815<-20521 Statuses=0008 0009 09:30:24 Msec=3750 True Az=112.995 Ze=-127.815 Az status=0008 Ze status=0009 09:30:24 Check angles 09:30:24 SkyScan query 09:30:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.74<-21916 Statuses=0008 0009 09:30:25 Msec=4500 True Az=112.995 Ze=-148.74 Az status=0008 Ze status=0009 09:30:25 Check angles 09:30:25 SkyScan query 09:30:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.695<-23313 Statuses=0008 0009 09:30:25 Msec=5250 True Az=112.995 Ze=-169.695 Az status=0008 Ze status=0009 09:30:25 Check angles 09:30:25 SkyScan query 09:30:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:30:26 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:30:26 Message to Master queued w/err=0: serial=101498 error=0 09:30:31 Received message from Master: op=Filter serial=101499 09:30:31 Color wheel filter change from 0 to 0 09:30:31 FLIGetFilterPos err=0 currentPosition=0 09:30:31 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:31 Filter is already there-color wheel unchanged 09:30:31 Received message from Master: op=Shutter serial=101500 09:30:31 Shutter LASER open 09:30:31 Received message from Camera: op=State serial=101502 09:30:31 GetSingleValue result=40 Value=cccccccc 09:30:31 SkyScan query 09:30:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:30:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:32 Parameters OK 09:30:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:32 Set A/D data flow result=40 09:30:32 Set A/D channel type result=40 09:30:32 Set A/D encoding result=40 09:30:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:32 Set channel filter=0.000000e+000 result=40 09:30:32 Config A/D Result=40 09:30:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:32 Get A/D filter: -9.255963e+061 result=40 09:30:32 Get A/D value=-858993460 result=40 09:30:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:32 Parameters OK 09:30:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:32 Set A/D data flow result=40 09:30:32 Set A/D channel type result=40 09:30:32 Set A/D encoding result=40 09:30:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:32 Set channel filter=0.000000e+000 result=40 09:30:32 Config A/D Result=40 09:30:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:32 Get A/D filter: -9.255963e+061 result=40 09:30:32 Get A/D value=-858993460 result=40 09:30:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:30:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:30:32 Aux= 09:30:32 Message to Camera, serial 101502 queued 09:30:40 Received message from Master: op=Shutter serial=101512 09:30:40 Shutter LASER close 09:30:41 Received message from Master: op=PointingHead serial=101516 09:30:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:30:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:30:41 Point started: ret=0 09:30:41 point_skyscan result=0 09:30:42 Check angles 09:30:42 SkyScan query 09:30:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 09:30:43 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 09:30:43 Check angles 09:30:43 SkyScan query 09:30:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 09:30:44 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 09:30:44 Check angles 09:30:44 SkyScan query 09:30:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.535<-18769 Statuses=0008 0009 09:30:44 Msec=1500 True Az=112.995 Ze=-101.535 Az status=0008 Ze status=0009 09:30:44 Check angles 09:30:44 SkyScan query 09:30:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.565<-17371 Statuses=0008 0009 09:30:45 Msec=2250 True Az=112.995 Ze=-80.565 Az status=0008 Ze status=0009 09:30:45 Check angles 09:30:45 SkyScan query 09:30:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.625<-15975 Statuses=0008 0009 09:30:46 Msec=3000 True Az=112.995 Ze=-59.625 Az status=0008 Ze status=0009 09:30:46 Check angles 09:30:46 SkyScan query 09:30:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.655<-14577 Statuses=0008 0009 09:30:47 Msec=3750 True Az=112.995 Ze=-38.655 Az status=0008 Ze status=0009 09:30:47 Check angles 09:30:47 SkyScan query 09:30:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.715<-13181 Statuses=0008 0009 09:30:47 Msec=4500 True Az=112.995 Ze=-17.715 Az status=0008 Ze status=0009 09:30:47 Check angles 09:30:47 SkyScan query 09:30:48 SkyScan query done: ret=0 az=112.995<-7533 ze=3.24<-11784 Statuses=0008 0009 09:30:48 Msec=5250 True Az=112.995 Ze=3.24 Az status=0008 Ze status=0009 09:30:48 Check angles 09:30:48 SkyScan query 09:30:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:30:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:30:49 Message to Master queued w/err=0: serial=101516 error=0 09:30:54 Received message from Master: op=Filter serial=101517 09:30:54 Color wheel filter change from 0 to 0 09:30:54 FLIGetFilterPos err=0 currentPosition=0 09:30:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:54 Filter is already there-color wheel unchanged 09:30:54 Received message from Master: op=Shutter serial=101518 09:30:54 Shutter LASER close 09:30:54 Received message from Camera: op=State serial=101520 09:30:54 GetSingleValue result=40 Value=cccccccc 09:30:54 SkyScan query 09:30:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:30:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:55 Parameters OK 09:30:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:55 Set A/D data flow result=40 09:30:55 Set A/D channel type result=40 09:30:55 Set A/D encoding result=40 09:30:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:55 Set channel filter=0.000000e+000 result=40 09:30:55 Config A/D Result=40 09:30:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:55 Get A/D filter: -9.255963e+061 result=40 09:30:55 Get A/D value=-858993460 result=40 09:30:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:55 Parameters OK 09:30:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:55 Set A/D data flow result=40 09:30:55 Set A/D channel type result=40 09:30:55 Set A/D encoding result=40 09:30:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:55 Set channel filter=0.000000e+000 result=40 09:30:55 Config A/D Result=40 09:30:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:55 Get A/D filter: -9.255963e+061 result=40 09:30:55 Get A/D value=-858993460 result=40 09:30:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:30:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:30:55 Aux= 09:30:55 Message to Camera, serial 101520 queued 09:31:32 Received message from Master: op=PointingHead serial=101533 09:31:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:31:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:31:32 Point started: ret=0 09:31:32 point_skyscan result=0 09:31:33 Check angles 09:31:33 SkyScan query 09:31:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:31:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:31:33 Message to Master queued w/err=0: serial=101533 error=0 09:31:38 Received message from Master: op=Filter serial=101534 09:31:38 Color wheel filter change from 0 to 0 09:31:38 FLIGetFilterPos err=0 currentPosition=0 09:31:38 FLIGetStepsRemaining err=0 RemainingSteps=0 09:31:38 Filter is already there-color wheel unchanged 09:31:38 Received message from Master: op=Shutter serial=101535 09:31:38 Shutter LASER close 09:31:38 Received message from Camera: op=State serial=101537 09:31:38 GetSingleValue result=40 Value=cccccccc 09:31:38 SkyScan query 09:31:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:31:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:39 Parameters OK 09:31:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:39 Set A/D data flow result=40 09:31:39 Set A/D channel type result=40 09:31:39 Set A/D encoding result=40 09:31:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:39 Set channel filter=0.000000e+000 result=40 09:31:39 Config A/D Result=40 09:31:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:39 Get A/D filter: -9.255963e+061 result=40 09:31:39 Get A/D value=-858993460 result=40 09:31:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:39 Parameters OK 09:31:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:39 Set A/D data flow result=40 09:31:39 Set A/D channel type result=40 09:31:39 Set A/D encoding result=40 09:31:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:39 Set channel filter=0.000000e+000 result=40 09:31:39 Config A/D Result=40 09:31:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:39 Get A/D filter: -9.255963e+061 result=40 09:31:39 Get A/D value=-858993460 result=40 09:31:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:31:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:31:39 Aux= 09:31:39 Message to Camera, serial 101537 queued 09:32:16 Received message from Master: op=PointingHead serial=101550 09:32:16 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:32:16 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:32:16 Point started: ret=0 09:32:16 point_skyscan result=0 09:32:17 Check angles 09:32:17 SkyScan query 09:32:17 SkyScan query done: ret=0 az=135.78<-9052 ze=-6.51<-12434 Statuses=0009 0008 09:32:17 Msec=0 True Az=135.78 Ze=-6.51 Az status=0009 Ze status=0008 09:32:18 Check angles 09:32:18 SkyScan query 09:32:18 SkyScan query done: ret=0 az=153.3<-10220 ze=-6.495<-12433 Statuses=0009 0008 09:32:18 Msec=750 True Az=153.3 Ze=-6.495 Az status=0009 Ze status=0008 09:32:18 Check angles 09:32:18 SkyScan query 09:32:19 SkyScan query done: ret=0 az=171.18<-11412 ze=-6.495<-12433 Statuses=0009 0008 09:32:19 Msec=1500 True Az=171.18 Ze=-6.495 Az status=0009 Ze status=0008 09:32:19 Check angles 09:32:19 SkyScan query 09:32:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:32:20 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:32:20 Message to Master queued w/err=0: serial=101550 error=0 09:32:25 Received message from Master: op=Filter serial=101551 09:32:25 Color wheel filter change from 0 to 0 09:32:25 FLIGetFilterPos err=0 currentPosition=0 09:32:25 FLIGetStepsRemaining err=0 RemainingSteps=0 09:32:25 Filter is already there-color wheel unchanged 09:32:25 Received message from Master: op=Shutter serial=101552 09:32:25 Shutter LASER close 09:32:25 Received message from Camera: op=State serial=101554 09:32:25 GetSingleValue result=40 Value=cccccccc 09:32:25 SkyScan query 09:32:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:32:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:26 Parameters OK 09:32:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:26 Set A/D data flow result=40 09:32:26 Set A/D channel type result=40 09:32:26 Set A/D encoding result=40 09:32:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:26 Set channel filter=0.000000e+000 result=40 09:32:26 Config A/D Result=40 09:32:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:26 Get A/D filter: -9.255963e+061 result=40 09:32:26 Get A/D value=-858993460 result=40 09:32:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:26 Parameters OK 09:32:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:26 Set A/D data flow result=40 09:32:26 Set A/D channel type result=40 09:32:26 Set A/D encoding result=40 09:32:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:26 Set channel filter=0.000000e+000 result=40 09:32:26 Config A/D Result=40 09:32:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:26 Get A/D filter: -9.255963e+061 result=40 09:32:26 Get A/D value=-858993460 result=40 09:32:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:32:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:32:26 Aux= 09:32:26 Message to Camera, serial 101554 queued 09:33:02 Received message from Master: op=PointingHead serial=101567 09:33:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:33:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:33:03 Point started: ret=0 09:33:03 point_skyscan result=0 09:33:03 Check angles 09:33:03 SkyScan query 09:33:04 SkyScan query done: ret=0 az=153<-10200 ze=6.51<-11566 Statuses=0009 0008 09:33:04 Msec=0 True Az=153 Ze=6.51 Az status=0009 Ze status=0008 09:33:04 Check angles 09:33:04 SkyScan query 09:33:05 SkyScan query done: ret=0 az=135.525<-9035 ze=6.495<-11567 Statuses=0009 0008 09:33:05 Msec=750 True Az=135.525 Ze=6.495 Az status=0009 Ze status=0008 09:33:05 Check angles 09:33:05 SkyScan query 09:33:06 SkyScan query done: ret=0 az=117.645<-7843 ze=6.495<-11567 Statuses=0009 0008 09:33:06 Msec=1500 True Az=117.645 Ze=6.495 Az status=0009 Ze status=0008 09:33:06 Check angles 09:33:06 SkyScan query 09:33:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:33:06 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:33:06 Message to Master queued w/err=0: serial=101567 error=0 09:33:11 Received message from Master: op=Filter serial=101568 09:33:11 Color wheel filter change from 0 to 0 09:33:11 FLIGetFilterPos err=0 currentPosition=0 09:33:11 FLIGetStepsRemaining err=0 RemainingSteps=0 09:33:11 Filter is already there-color wheel unchanged 09:33:11 Received message from Master: op=Shutter serial=101569 09:33:11 Shutter LASER close 09:33:12 Received message from Camera: op=State serial=101571 09:33:12 GetSingleValue result=40 Value=cccccccc 09:33:12 SkyScan query 09:33:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:33:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:12 Parameters OK 09:33:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:12 Set A/D data flow result=40 09:33:12 Set A/D channel type result=40 09:33:12 Set A/D encoding result=40 09:33:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:12 Set channel filter=0.000000e+000 result=40 09:33:12 Config A/D Result=40 09:33:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:12 Get A/D filter: -9.255963e+061 result=40 09:33:12 Get A/D value=-858993460 result=40 09:33:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:12 Parameters OK 09:33:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:12 Set A/D data flow result=40 09:33:12 Set A/D channel type result=40 09:33:12 Set A/D encoding result=40 09:33:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:12 Set channel filter=0.000000e+000 result=40 09:33:12 Config A/D Result=40 09:33:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:12 Get A/D filter: -9.255963e+061 result=40 09:33:12 Get A/D value=-858993460 result=40 09:33:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:33:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:33:12 Aux= 09:33:12 Message to Camera, serial 101571 queued 09:33:38 Received message from Master: op=Identify serial=101572 09:33:49 Received message from Master: op=PointingHead serial=101587 09:33:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:33:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:33:49 Point started: ret=0 09:33:49 point_skyscan result=0 09:33:50 Check angles 09:33:50 SkyScan query 09:33:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.52<-13568 Statuses=0008 0009 09:33:51 Msec=0 True Az=112.995 Ze=-23.52 Az status=0008 Ze status=0009 09:33:51 Check angles 09:33:51 SkyScan query 09:33:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 09:33:51 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 09:33:52 Check angles 09:33:52 SkyScan query 09:33:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.415<-16361 Statuses=0008 0009 09:33:52 Msec=1500 True Az=112.995 Ze=-65.415 Az status=0008 Ze status=0009 09:33:52 Check angles 09:33:52 SkyScan query 09:33:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.355<-17757 Statuses=0008 0009 09:33:53 Msec=2250 True Az=112.995 Ze=-86.355 Az status=0008 Ze status=0009 09:33:53 Check angles 09:33:53 SkyScan query 09:33:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.295<-19153 Statuses=0008 0009 09:33:54 Msec=3000 True Az=112.995 Ze=-107.295 Az status=0008 Ze status=0009 09:33:54 Check angles 09:33:54 SkyScan query 09:33:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.715<-20581 Statuses=0008 0009 09:33:54 Msec=3750 True Az=112.995 Ze=-128.715 Az status=0008 Ze status=0009 09:33:55 Check angles 09:33:55 SkyScan query 09:33:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.73<-21982 Statuses=0008 0009 09:33:55 Msec=4500 True Az=112.995 Ze=-149.73 Az status=0008 Ze status=0009 09:33:55 Check angles 09:33:55 SkyScan query 09:33:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.64<-23376 Statuses=0008 0009 09:33:56 Msec=5250 True Az=112.995 Ze=-170.64 Az status=0008 Ze status=0009 09:33:56 Check angles 09:33:56 SkyScan query 09:33:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:33:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:33:57 Message to Master queued w/err=0: serial=101587 error=0 09:34:02 Received message from Master: op=Filter serial=101588 09:34:02 Color wheel filter change from 0 to 0 09:34:02 FLIGetFilterPos err=0 currentPosition=0 09:34:02 FLIGetStepsRemaining err=0 RemainingSteps=0 09:34:02 Filter is already there-color wheel unchanged 09:34:02 Received message from Master: op=Shutter serial=101589 09:34:02 Shutter LASER open 09:34:02 Received message from Camera: op=State serial=101591 09:34:02 GetSingleValue result=40 Value=cccccccc 09:34:02 SkyScan query 09:34:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:34:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:03 Parameters OK 09:34:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:03 Set A/D data flow result=40 09:34:03 Set A/D channel type result=40 09:34:03 Set A/D encoding result=40 09:34:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:03 Set channel filter=0.000000e+000 result=40 09:34:03 Config A/D Result=40 09:34:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:03 Get A/D filter: -9.255963e+061 result=40 09:34:03 Get A/D value=-858993460 result=40 09:34:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:03 Parameters OK 09:34:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:03 Set A/D data flow result=40 09:34:03 Set A/D channel type result=40 09:34:03 Set A/D encoding result=40 09:34:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:03 Set channel filter=0.000000e+000 result=40 09:34:03 Config A/D Result=40 09:34:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:03 Get A/D filter: -9.255963e+061 result=40 09:34:03 Get A/D value=-858993460 result=40 09:34:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:34:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:34:03 Aux= 09:34:03 Message to Camera, serial 101591 queued 09:34:11 Received message from Master: op=Shutter serial=101601 09:34:11 Shutter LASER close 09:34:11 Received message from Master: op=PointingHead serial=101605 09:34:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:34:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:34:12 Point started: ret=0 09:34:12 point_skyscan result=0 09:34:13 Check angles 09:34:13 SkyScan query 09:34:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 09:34:13 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 09:34:13 Check angles 09:34:13 SkyScan query 09:34:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 09:34:14 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 09:34:14 Check angles 09:34:14 SkyScan query 09:34:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.65<-18710 Statuses=0008 0009 [UTC 2019-3-4 09:34:15] 09:34:15 Msec=1500 True Az=112.995 Ze=-100.65 Az status=0008 Ze status=0009 09:34:15 Check angles 09:34:15 SkyScan query 09:34:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.665<-17311 Statuses=0008 0009 09:34:15 Msec=2250 True Az=112.995 Ze=-79.665 Az status=0008 Ze status=0009 09:34:16 Check angles 09:34:16 SkyScan query 09:34:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.74<-15916 Statuses=0008 0009 09:34:16 Msec=3000 True Az=112.995 Ze=-58.74 Az status=0008 Ze status=0009 09:34:16 Check angles 09:34:16 SkyScan query 09:34:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.365<-14491 Statuses=0008 0009 09:34:17 Msec=3750 True Az=112.995 Ze=-37.365 Az status=0008 Ze status=0009 09:34:17 Check angles 09:34:17 SkyScan query 09:34:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.395<-13093 Statuses=0008 0009 09:34:18 Msec=4500 True Az=112.995 Ze=-16.395 Az status=0008 Ze status=0009 09:34:18 Check angles 09:34:18 SkyScan query 09:34:18 SkyScan query done: ret=0 az=112.995<-7533 ze=4.44<-11704 Statuses=0008 0009 09:34:18 Msec=5250 True Az=112.995 Ze=4.44 Az status=0008 Ze status=0009 09:34:19 Check angles 09:34:19 SkyScan query 09:34:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:34:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:34:19 Message to Master queued w/err=0: serial=101605 error=0 09:34:24 Received message from Master: op=Filter serial=101606 09:34:24 Color wheel filter change from 0 to 0 09:34:24 FLIGetFilterPos err=0 currentPosition=0 09:34:24 FLIGetStepsRemaining err=0 RemainingSteps=0 09:34:24 Filter is already there-color wheel unchanged 09:34:24 Received message from Master: op=Shutter serial=101607 09:34:24 Shutter LASER close 09:34:24 Received message from Camera: op=State serial=101609 09:34:24 GetSingleValue result=40 Value=cccccccc 09:34:24 SkyScan query 09:34:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:34:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:25 Parameters OK 09:34:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:25 Set A/D data flow result=40 09:34:25 Set A/D channel type result=40 09:34:25 Set A/D encoding result=40 09:34:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:25 Set channel filter=0.000000e+000 result=40 09:34:25 Config A/D Result=40 09:34:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:25 Get A/D filter: -9.255963e+061 result=40 09:34:25 Get A/D value=-858993460 result=40 09:34:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:25 Parameters OK 09:34:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:25 Set A/D data flow result=40 09:34:25 Set A/D channel type result=40 09:34:25 Set A/D encoding result=40 09:34:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:25 Set channel filter=0.000000e+000 result=40 09:34:25 Config A/D Result=40 09:34:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:25 Get A/D filter: -9.255963e+061 result=40 09:34:25 Get A/D value=-858993460 result=40 09:34:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:34:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:34:25 Aux= 09:34:25 Message to Camera, serial 101609 queued 09:35:02 Received message from Master: op=PointingHead serial=101622 09:35:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:35:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:35:02 Point started: ret=0 09:35:02 point_skyscan result=0 09:35:03 Check angles 09:35:03 SkyScan query 09:35:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:35:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:35:04 Message to Master queued w/err=0: serial=101622 error=0 09:35:09 Received message from Master: op=Filter serial=101623 09:35:09 Color wheel filter change from 0 to 0 09:35:09 FLIGetFilterPos err=0 currentPosition=0 09:35:09 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:09 Filter is already there-color wheel unchanged 09:35:09 Received message from Master: op=Shutter serial=101624 09:35:09 Shutter LASER close 09:35:09 Received message from Camera: op=State serial=101626 09:35:09 GetSingleValue result=40 Value=cccccccc 09:35:09 SkyScan query 09:35:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:35:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:09 Parameters OK 09:35:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:09 Set A/D data flow result=40 09:35:09 Set A/D channel type result=40 09:35:09 Set A/D encoding result=40 09:35:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:09 Set channel filter=0.000000e+000 result=40 09:35:09 Config A/D Result=40 09:35:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:09 Get A/D filter: -9.255963e+061 result=40 09:35:09 Get A/D value=-858993460 result=40 09:35:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:09 Parameters OK 09:35:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:09 Set A/D data flow result=40 09:35:09 Set A/D channel type result=40 09:35:09 Set A/D encoding result=40 09:35:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:09 Set channel filter=0.000000e+000 result=40 09:35:09 Config A/D Result=40 09:35:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:09 Get A/D filter: -9.255963e+061 result=40 09:35:09 Get A/D value=-858993460 result=40 09:35:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:09 Aux= 09:35:09 Message to Camera, serial 101626 queued 09:35:46 Received message from Master: op=PointingHead serial=101639 09:35:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:35:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:35:47 Point started: ret=0 09:35:47 point_skyscan result=0 09:35:47 Check angles 09:35:47 SkyScan query 09:35:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:35:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:35:48 Message to Master queued w/err=0: serial=101639 error=0 09:35:53 Received message from Master: op=Filter serial=101640 09:35:53 Color wheel filter change from 0 to 0 09:35:53 FLIGetFilterPos err=0 currentPosition=0 09:35:53 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:53 Filter is already there-color wheel unchanged 09:35:53 Received message from Master: op=Shutter serial=101641 09:35:53 Shutter LASER close 09:35:53 Received message from Camera: op=State serial=101643 09:35:53 GetSingleValue result=40 Value=cccccccc 09:35:53 SkyScan query 09:35:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:35:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:54 Parameters OK 09:35:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:54 Set A/D data flow result=40 09:35:54 Set A/D channel type result=40 09:35:54 Set A/D encoding result=40 09:35:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:54 Set channel filter=0.000000e+000 result=40 09:35:54 Config A/D Result=40 09:35:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:54 Get A/D filter: -9.255963e+061 result=40 09:35:54 Get A/D value=-858993460 result=40 09:35:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:54 Parameters OK 09:35:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:54 Set A/D data flow result=40 09:35:54 Set A/D channel type result=40 09:35:54 Set A/D encoding result=40 09:35:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:54 Set channel filter=0.000000e+000 result=40 09:35:54 Config A/D Result=40 09:35:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:54 Get A/D filter: -9.255963e+061 result=40 09:35:54 Get A/D value=-858993460 result=40 09:35:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:54 Aux= 09:35:54 Message to Camera, serial 101643 queued 09:36:31 Received message from Master: op=PointingHead serial=101656 09:36:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:36:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:36:31 Point started: ret=0 09:36:31 point_skyscan result=0 09:36:32 Check angles 09:36:32 SkyScan query 09:36:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:36:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:36:32 Message to Master queued w/err=0: serial=101656 error=0 09:36:37 Received message from Master: op=Filter serial=101657 09:36:37 Color wheel filter change from 0 to 0 09:36:37 FLIGetFilterPos err=0 currentPosition=0 09:36:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:36:37 Filter is already there-color wheel unchanged 09:36:37 Received message from Master: op=Shutter serial=101658 09:36:37 Shutter LASER close 09:36:38 Received message from Camera: op=State serial=101660 09:36:38 GetSingleValue result=40 Value=cccccccc 09:36:38 SkyScan query 09:36:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:36:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:38 Parameters OK 09:36:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:38 Set A/D data flow result=40 09:36:38 Set A/D channel type result=40 09:36:38 Set A/D encoding result=40 09:36:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:38 Set channel filter=0.000000e+000 result=40 09:36:38 Config A/D Result=40 09:36:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:38 Get A/D filter: -9.255963e+061 result=40 09:36:38 Get A/D value=-858993460 result=40 09:36:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:38 Parameters OK 09:36:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:38 Set A/D data flow result=40 09:36:38 Set A/D channel type result=40 09:36:38 Set A/D encoding result=40 09:36:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:38 Set channel filter=0.000000e+000 result=40 09:36:38 Config A/D Result=40 09:36:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:38 Get A/D filter: -9.255963e+061 result=40 09:36:38 Get A/D value=-858993460 result=40 09:36:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:36:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:36:38 Aux= 09:36:38 Message to Camera, serial 101660 queued 09:37:15 Received message from Master: op=PointingHead serial=101673 09:37:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:37:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:37:15 Point started: ret=0 09:37:15 point_skyscan result=0 09:37:16 Check angles 09:37:16 SkyScan query 09:37:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.535<-13569 Statuses=0008 0009 09:37:17 Msec=0 True Az=112.995 Ze=-23.535 Az status=0008 Ze status=0009 09:37:17 Check angles 09:37:17 SkyScan query 09:37:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.505<-14967 Statuses=0008 0009 09:37:17 Msec=750 True Az=112.995 Ze=-44.505 Az status=0008 Ze status=0009 09:37:18 Check angles 09:37:18 SkyScan query 09:37:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.865<-16391 Statuses=0008 0009 09:37:18 Msec=1500 True Az=112.995 Ze=-65.865 Az status=0008 Ze status=0009 09:37:18 Check angles 09:37:18 SkyScan query 09:37:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.805<-17787 Statuses=0008 0009 09:37:19 Msec=2250 True Az=112.995 Ze=-86.805 Az status=0008 Ze status=0009 09:37:19 Check angles 09:37:19 SkyScan query 09:37:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.775<-19185 Statuses=0008 0009 09:37:20 Msec=3000 True Az=112.995 Ze=-107.775 Az status=0008 Ze status=0009 09:37:20 Check angles 09:37:20 SkyScan query 09:37:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.195<-20613 Statuses=0008 0009 09:37:20 Msec=3750 True Az=112.995 Ze=-129.195 Az status=0008 Ze status=0009 09:37:21 Check angles 09:37:21 SkyScan query 09:37:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.54<-22036 Statuses=0008 0009 09:37:21 Msec=4500 True Az=112.995 Ze=-150.54 Az status=0008 Ze status=0009 09:37:21 Check angles 09:37:21 SkyScan query 09:37:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.285<-23419 Statuses=0008 0009 09:37:22 Msec=5250 True Az=112.995 Ze=-171.285 Az status=0008 Ze status=0009 09:37:22 Check angles 09:37:22 SkyScan query 09:37:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:37:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:37:23 Message to Master queued w/err=0: serial=101673 error=0 09:37:28 Received message from Master: op=Filter serial=101674 09:37:28 Color wheel filter change from 0 to 0 09:37:28 FLIGetFilterPos err=0 currentPosition=0 09:37:28 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:28 Filter is already there-color wheel unchanged 09:37:28 Received message from Master: op=Shutter serial=101675 09:37:28 Shutter LASER open 09:37:28 Received message from Camera: op=State serial=101677 09:37:28 GetSingleValue result=40 Value=cccccccc 09:37:28 SkyScan query 09:37:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:37:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:29 Parameters OK 09:37:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:29 Set A/D data flow result=40 09:37:29 Set A/D channel type result=40 09:37:29 Set A/D encoding result=40 09:37:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:29 Set channel filter=0.000000e+000 result=40 09:37:29 Config A/D Result=40 09:37:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:29 Get A/D filter: -9.255963e+061 result=40 09:37:29 Get A/D value=-858993460 result=40 09:37:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:29 Parameters OK 09:37:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:29 Set A/D data flow result=40 09:37:29 Set A/D channel type result=40 09:37:29 Set A/D encoding result=40 09:37:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:29 Set channel filter=0.000000e+000 result=40 09:37:29 Config A/D Result=40 09:37:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:29 Get A/D filter: -9.255963e+061 result=40 09:37:29 Get A/D value=-858993460 result=40 09:37:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:29 Aux= 09:37:29 Message to Camera, serial 101677 queued 09:37:37 Received message from Master: op=Shutter serial=101687 09:37:37 Shutter LASER close 09:37:38 Received message from Master: op=PointingHead serial=101691 09:37:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:37:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:37:38 Point started: ret=0 09:37:38 point_skyscan result=0 09:37:39 Check angles 09:37:39 SkyScan query 09:37:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.04<-21536 Statuses=0008 0009 09:37:39 Msec=0 True Az=112.995 Ze=-143.04 Az status=0008 Ze status=0009 09:37:39 Check angles 09:37:39 SkyScan query 09:37:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 09:37:40 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 09:37:40 Check angles 09:37:40 SkyScan query 09:37:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 09:37:41 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 09:37:41 Check angles 09:37:41 SkyScan query 09:37:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.16<-17344 Statuses=0008 0009 09:37:42 Msec=2250 True Az=112.995 Ze=-80.16 Az status=0008 Ze status=0009 09:37:42 Check angles 09:37:42 SkyScan query 09:37:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 09:37:42 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 09:37:42 Check angles 09:37:42 SkyScan query 09:37:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 09:37:43 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 09:37:43 Check angles 09:37:43 SkyScan query 09:37:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 09:37:44 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 09:37:44 Check angles 09:37:44 SkyScan query 09:37:45 SkyScan query done: ret=0 az=112.995<-7533 ze=3.705<-11753 Statuses=0008 0009 09:37:45 Msec=5250 True Az=112.995 Ze=3.705 Az status=0008 Ze status=0009 09:37:45 Check angles 09:37:45 SkyScan query 09:37:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:37:45 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:37:45 Message to Master queued w/err=0: serial=101691 error=0 09:37:50 Received message from Master: op=Filter serial=101692 09:37:50 Color wheel filter change from 0 to 0 09:37:50 FLIGetFilterPos err=0 currentPosition=0 09:37:50 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:50 Filter is already there-color wheel unchanged 09:37:50 Received message from Master: op=Shutter serial=101693 09:37:50 Shutter LASER close 09:37:51 Received message from Camera: op=State serial=101695 09:37:51 GetSingleValue result=40 Value=cccccccc 09:37:51 SkyScan query 09:37:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:37:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:51 Parameters OK 09:37:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:51 Set A/D data flow result=40 09:37:51 Set A/D channel type result=40 09:37:51 Set A/D encoding result=40 09:37:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:51 Set channel filter=0.000000e+000 result=40 09:37:51 Config A/D Result=40 09:37:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:51 Get A/D filter: -9.255963e+061 result=40 09:37:51 Get A/D value=-858993460 result=40 09:37:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:51 Parameters OK 09:37:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:51 Set A/D data flow result=40 09:37:51 Set A/D channel type result=40 09:37:51 Set A/D encoding result=40 09:37:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:51 Set channel filter=0.000000e+000 result=40 09:37:51 Config A/D Result=40 09:37:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:51 Get A/D filter: -9.255963e+061 result=40 09:37:51 Get A/D value=-858993460 result=40 09:37:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:51 Aux= 09:37:51 Message to Camera, serial 101695 queued 09:38:28 Received message from Master: op=PointingHead serial=101708 09:38:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:38:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:38:28 Point started: ret=0 09:38:28 point_skyscan result=0 09:38:29 Check angles 09:38:29 SkyScan query 09:38:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:38:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:38:30 Message to Master queued w/err=0: serial=101708 error=0 09:38:35 Received message from Master: op=Filter serial=101709 09:38:35 Color wheel filter change from 0 to 0 09:38:35 FLIGetFilterPos err=0 currentPosition=0 09:38:35 FLIGetStepsRemaining err=0 RemainingSteps=0 09:38:35 Filter is already there-color wheel unchanged 09:38:35 Received message from Master: op=Shutter serial=101710 09:38:35 Shutter LASER close 09:38:35 Received message from Camera: op=State serial=101712 09:38:35 GetSingleValue result=40 Value=cccccccc 09:38:35 SkyScan query 09:38:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:38:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:36 Parameters OK 09:38:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:36 Set A/D data flow result=40 09:38:36 Set A/D channel type result=40 09:38:36 Set A/D encoding result=40 09:38:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:36 Set channel filter=0.000000e+000 result=40 09:38:36 Config A/D Result=40 09:38:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:36 Get A/D filter: -9.255963e+061 result=40 09:38:36 Get A/D value=-858993460 result=40 09:38:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:36 Parameters OK 09:38:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:36 Set A/D data flow result=40 09:38:36 Set A/D channel type result=40 09:38:36 Set A/D encoding result=40 09:38:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:36 Set channel filter=0.000000e+000 result=40 09:38:36 Config A/D Result=40 09:38:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:36 Get A/D filter: -9.255963e+061 result=40 09:38:36 Get A/D value=-858993460 result=40 09:38:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:38:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:38:36 Aux= 09:38:36 Message to Camera, serial 101712 queued 09:39:12 Received message from Master: op=PointingHead serial=101725 09:39:12 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:39:12 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:39:13 Point started: ret=0 09:39:13 point_skyscan result=0 09:39:13 Check angles 09:39:13 SkyScan query 09:39:14 SkyScan query done: ret=0 az=136.14<-9076 ze=-6.51<-12434 Statuses=0009 0008 09:39:14 Msec=0 True Az=136.14 Ze=-6.51 Az status=0009 Ze status=0008 09:39:14 Check angles 09:39:14 SkyScan query 09:39:15 SkyScan query done: ret=0 az=153.615<-10241 ze=-6.51<-12434 Statuses=0009 0008 09:39:15 Msec=750 True Az=153.615 Ze=-6.51 Az status=0009 Ze status=0008 09:39:15 Check angles 09:39:15 SkyScan query 09:39:16 SkyScan query done: ret=0 az=171.18<-11412 ze=-6.495<-12433 Statuses=0009 0008 09:39:16 Msec=1500 True Az=171.18 Ze=-6.495 Az status=0009 Ze status=0008 09:39:16 Check angles 09:39:16 SkyScan query 09:39:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:39:16 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:39:16 Message to Master queued w/err=0: serial=101725 error=0 09:39:21 Received message from Master: op=Filter serial=101726 09:39:21 Color wheel filter change from 0 to 0 09:39:21 FLIGetFilterPos err=0 currentPosition=0 09:39:21 FLIGetStepsRemaining err=0 RemainingSteps=0 09:39:21 Filter is already there-color wheel unchanged 09:39:21 Received message from Master: op=Shutter serial=101727 09:39:21 Shutter LASER close 09:39:22 Received message from Camera: op=State serial=101729 09:39:22 GetSingleValue result=40 Value=cccccccc 09:39:22 SkyScan query 09:39:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:39:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:22 Parameters OK 09:39:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:22 Set A/D data flow result=40 09:39:22 Set A/D channel type result=40 09:39:22 Set A/D encoding result=40 09:39:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:22 Set channel filter=0.000000e+000 result=40 09:39:22 Config A/D Result=40 09:39:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:22 Get A/D filter: -9.255963e+061 result=40 09:39:22 Get A/D value=-858993460 result=40 09:39:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:22 Parameters OK 09:39:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:22 Set A/D data flow result=40 09:39:22 Set A/D channel type result=40 09:39:22 Set A/D encoding result=40 09:39:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:22 Set channel filter=0.000000e+000 result=40 09:39:22 Config A/D Result=40 09:39:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:22 Get A/D filter: -9.255963e+061 result=40 09:39:22 Get A/D value=-858993460 result=40 09:39:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:39:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:39:22 Aux= 09:39:22 Message to Camera, serial 101729 queued 09:39:59 Received message from Master: op=PointingHead serial=101742 09:39:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:39:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:39:59 Point started: ret=0 09:39:59 point_skyscan result=0 09:40:00 Check angles 09:40:00 SkyScan query 09:40:01 SkyScan query done: ret=0 az=152.85<-10190 ze=6.51<-11566 Statuses=0009 0008 09:40:01 Msec=0 True Az=152.85 Ze=6.51 Az status=0009 Ze status=0008 09:40:01 Check angles 09:40:01 SkyScan query 09:40:01 SkyScan query done: ret=0 az=135.075<-9005 ze=6.495<-11567 Statuses=0009 0008 09:40:01 Msec=750 True Az=135.075 Ze=6.495 Az status=0009 Ze status=0008 09:40:02 Check angles 09:40:02 SkyScan query 09:40:02 SkyScan query done: ret=0 az=117.195<-7813 ze=6.495<-11567 Statuses=0009 0008 09:40:02 Msec=1500 True Az=117.195 Ze=6.495 Az status=0009 Ze status=0008 09:40:02 Check angles 09:40:02 SkyScan query 09:40:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:40:03 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:40:03 Message to Master queued w/err=0: serial=101742 error=0 09:40:08 Received message from Master: op=Filter serial=101743 09:40:08 Color wheel filter change from 0 to 0 09:40:08 FLIGetFilterPos err=0 currentPosition=0 09:40:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:08 Filter is already there-color wheel unchanged 09:40:08 Received message from Master: op=Shutter serial=101744 09:40:08 Shutter LASER close 09:40:08 Received message from Camera: op=State serial=101746 09:40:08 GetSingleValue result=40 Value=cccccccc 09:40:08 SkyScan query 09:40:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:40:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:09 Parameters OK 09:40:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:09 Set A/D data flow result=40 09:40:09 Set A/D channel type result=40 09:40:09 Set A/D encoding result=40 09:40:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:09 Set channel filter=0.000000e+000 result=40 09:40:09 Config A/D Result=40 09:40:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:09 Get A/D filter: -9.255963e+061 result=40 09:40:09 Get A/D value=-858993460 result=40 09:40:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:09 Parameters OK 09:40:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:09 Set A/D data flow result=40 09:40:09 Set A/D channel type result=40 09:40:09 Set A/D encoding result=40 09:40:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:09 Set channel filter=0.000000e+000 result=40 09:40:09 Config A/D Result=40 09:40:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:09 Get A/D filter: -9.255963e+061 result=40 09:40:09 Get A/D value=-858993460 result=40 09:40:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:09 Aux= 09:40:09 Message to Camera, serial 101746 queued 09:40:46 Received message from Master: op=PointingHead serial=101759 09:40:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:40:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:40:46 Point started: ret=0 09:40:46 point_skyscan result=0 09:40:47 Check angles 09:40:47 SkyScan query 09:40:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.475<-13565 Statuses=0008 0009 09:40:47 Msec=0 True Az=112.995 Ze=-23.475 Az status=0008 Ze status=0009 09:40:48 Check angles 09:40:48 SkyScan query 09:40:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.805<-14987 Statuses=0008 0009 09:40:48 Msec=750 True Az=112.995 Ze=-44.805 Az status=0008 Ze status=0009 09:40:48 Check angles 09:40:48 SkyScan query 09:40:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.79<-16386 Statuses=0008 0009 09:40:49 Msec=1500 True Az=112.995 Ze=-65.79 Az status=0008 Ze status=0009 09:40:49 Check angles 09:40:49 SkyScan query 09:40:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.225<-17815 Statuses=0008 0009 09:40:50 Msec=2250 True Az=112.995 Ze=-87.225 Az status=0008 Ze status=0009 09:40:50 Check angles 09:40:50 SkyScan query 09:40:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.6<-19240 Statuses=0008 0009 09:40:50 Msec=3000 True Az=112.995 Ze=-108.6 Az status=0008 Ze status=0009 09:40:51 Check angles 09:40:51 SkyScan query 09:40:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.96<-20664 Statuses=0008 0009 09:40:51 Msec=3750 True Az=112.995 Ze=-129.96 Az status=0008 Ze status=0009 09:40:51 Check angles 09:40:51 SkyScan query 09:40:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.885<-22059 Statuses=0008 0009 09:40:52 Msec=4500 True Az=112.995 Ze=-150.885 Az status=0008 Ze status=0009 09:40:52 Check angles 09:40:52 SkyScan query 09:40:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.54<-23436 Statuses=0008 0009 09:40:53 Msec=5250 True Az=112.995 Ze=-171.54 Az status=0008 Ze status=0009 09:40:53 Check angles 09:40:53 SkyScan query 09:40:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:40:53 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:40:53 Message to Master queued w/err=0: serial=101759 error=0 09:40:58 Received message from Master: op=Filter serial=101760 09:40:58 Color wheel filter change from 0 to 0 09:40:58 FLIGetFilterPos err=0 currentPosition=0 09:40:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:58 Filter is already there-color wheel unchanged 09:40:59 Received message from Master: op=Shutter serial=101761 09:40:59 Shutter LASER open 09:40:59 Received message from Camera: op=State serial=101763 09:40:59 GetSingleValue result=40 Value=cccccccc 09:40:59 SkyScan query 09:40:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:40:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:59 Parameters OK 09:40:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:59 Set A/D data flow result=40 09:40:59 Set A/D channel type result=40 09:40:59 Set A/D encoding result=40 09:40:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:59 Set channel filter=0.000000e+000 result=40 09:40:59 Config A/D Result=40 09:40:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:59 Get A/D filter: -9.255963e+061 result=40 09:40:59 Get A/D value=-858993460 result=40 09:40:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:59 Parameters OK 09:40:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:59 Set A/D data flow result=40 09:40:59 Set A/D channel type result=40 09:40:59 Set A/D encoding result=40 09:40:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:59 Set channel filter=0.000000e+000 result=40 09:40:59 Config A/D Result=40 09:40:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:59 Get A/D filter: -9.255963e+061 result=40 09:40:59 Get A/D value=-858993460 result=40 09:40:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:59 Aux= 09:40:59 Message to Camera, serial 101763 queued 09:41:08 Received message from Master: op=Shutter serial=101773 09:41:08 Shutter LASER close 09:41:08 Received message from Master: op=PointingHead serial=101777 09:41:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:41:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:41:09 Point started: ret=0 09:41:09 point_skyscan result=0 09:41:09 Check angles 09:41:09 SkyScan query 09:41:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 09:41:10 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 09:41:10 Check angles 09:41:10 SkyScan query 09:41:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.95<-20130 Statuses=0008 0009 09:41:11 Msec=750 True Az=112.995 Ze=-121.95 Az status=0008 Ze status=0009 09:41:11 Check angles 09:41:11 SkyScan query 09:41:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.04<-18736 Statuses=0008 0009 09:41:11 Msec=1500 True Az=112.995 Ze=-101.04 Az status=0008 Ze status=0009 09:41:12 Check angles 09:41:12 SkyScan query 09:41:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.07<-17338 Statuses=0008 0009 09:41:12 Msec=2250 True Az=112.995 Ze=-80.07 Az status=0008 Ze status=0009 09:41:12 Check angles 09:41:12 SkyScan query 09:41:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.115<-15941 Statuses=0008 0009 09:41:13 Msec=3000 True Az=112.995 Ze=-59.115 Az status=0008 Ze status=0009 09:41:13 Check angles 09:41:13 SkyScan query 09:41:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.1<-14540 Statuses=0008 0009 09:41:14 Msec=3750 True Az=112.995 Ze=-38.1 Az status=0008 Ze status=0009 09:41:14 Check angles 09:41:14 SkyScan query 09:41:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.175<-13145 Statuses=0008 0009 09:41:14 Msec=4500 True Az=112.995 Ze=-17.175 Az status=0008 Ze status=0009 09:41:15 Check angles 09:41:15 SkyScan query 09:41:15 SkyScan query done: ret=0 az=112.995<-7533 ze=3.795<-11747 Statuses=0008 0009 09:41:15 Msec=5250 True Az=112.995 Ze=3.795 Az status=0008 Ze status=0009 09:41:15 Check angles 09:41:15 SkyScan query 09:41:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:41:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:41:16 Message to Master queued w/err=0: serial=101777 error=0 09:41:21 Received message from Master: op=Filter serial=101778 09:41:21 Color wheel filter change from 0 to 0 09:41:21 FLIGetFilterPos err=0 currentPosition=0 09:41:21 FLIGetStepsRemaining err=0 RemainingSteps=0 09:41:21 Filter is already there-color wheel unchanged 09:41:21 Received message from Master: op=Shutter serial=101779 09:41:21 Shutter LASER close 09:41:21 Received message from Camera: op=State serial=101781 09:41:21 GetSingleValue result=40 Value=cccccccc 09:41:21 SkyScan query 09:41:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:41:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:22 Parameters OK 09:41:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:22 Set A/D data flow result=40 09:41:22 Set A/D channel type result=40 09:41:22 Set A/D encoding result=40 09:41:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:22 Set channel filter=0.000000e+000 result=40 09:41:22 Config A/D Result=40 09:41:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:22 Get A/D filter: -9.255963e+061 result=40 09:41:22 Get A/D value=-858993460 result=40 09:41:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:22 Parameters OK 09:41:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:22 Set A/D data flow result=40 09:41:22 Set A/D channel type result=40 09:41:22 Set A/D encoding result=40 09:41:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:22 Set channel filter=0.000000e+000 result=40 09:41:22 Config A/D Result=40 09:41:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:22 Get A/D filter: -9.255963e+061 result=40 09:41:22 Get A/D value=-858993460 result=40 09:41:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:41:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:41:22 Aux= 09:41:22 Message to Camera, serial 101781 queued 09:41:59 Received message from Master: op=PointingHead serial=101794 09:41:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:41:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:41:59 Point started: ret=0 09:41:59 point_skyscan result=0 09:42:00 Check angles 09:42:00 SkyScan query 09:42:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:42:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:42:00 Message to Master queued w/err=0: serial=101794 error=0 09:42:05 Received message from Master: op=Filter serial=101795 09:42:05 Color wheel filter change from 0 to 0 09:42:05 FLIGetFilterPos err=0 currentPosition=0 09:42:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:05 Filter is already there-color wheel unchanged 09:42:05 Received message from Master: op=Shutter serial=101796 09:42:05 Shutter LASER close 09:42:06 Received message from Camera: op=State serial=101798 09:42:06 GetSingleValue result=40 Value=cccccccc 09:42:06 SkyScan query 09:42:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:42:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:06 Parameters OK 09:42:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:06 Set A/D data flow result=40 09:42:06 Set A/D channel type result=40 09:42:06 Set A/D encoding result=40 09:42:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:06 Set channel filter=0.000000e+000 result=40 09:42:06 Config A/D Result=40 09:42:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:06 Get A/D filter: -9.255963e+061 result=40 09:42:06 Get A/D value=-858993460 result=40 09:42:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:06 Parameters OK 09:42:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:06 Set A/D data flow result=40 09:42:06 Set A/D channel type result=40 09:42:06 Set A/D encoding result=40 09:42:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:06 Set channel filter=0.000000e+000 result=40 09:42:06 Config A/D Result=40 09:42:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:06 Get A/D filter: -9.255963e+061 result=40 09:42:06 Get A/D value=-858993460 result=40 09:42:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:06 Aux= 09:42:06 Message to Camera, serial 101798 queued 09:42:43 Received message from Master: op=PointingHead serial=101811 09:42:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:42:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:42:43 Point started: ret=0 09:42:43 point_skyscan result=0 09:42:44 Check angles 09:42:44 SkyScan query 09:42:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:42:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:42:45 Message to Master queued w/err=0: serial=101811 error=0 09:42:50 Received message from Master: op=Filter serial=101812 09:42:50 Color wheel filter change from 0 to 0 09:42:50 FLIGetFilterPos err=0 currentPosition=0 09:42:50 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:50 Filter is already there-color wheel unchanged 09:42:50 Received message from Master: op=Shutter serial=101813 09:42:50 Shutter LASER close 09:42:50 Received message from Camera: op=State serial=101815 09:42:50 GetSingleValue result=40 Value=cccccccc 09:42:50 SkyScan query 09:42:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:42:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:50 Parameters OK 09:42:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:50 Set A/D data flow result=40 09:42:50 Set A/D channel type result=40 09:42:50 Set A/D encoding result=40 09:42:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:50 Set channel filter=0.000000e+000 result=40 09:42:50 Config A/D Result=40 09:42:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:50 Get A/D filter: -9.255963e+061 result=40 09:42:50 Get A/D value=-858993460 result=40 09:42:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:50 Parameters OK 09:42:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:50 Set A/D data flow result=40 09:42:50 Set A/D channel type result=40 09:42:50 Set A/D encoding result=40 09:42:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:50 Set channel filter=0.000000e+000 result=40 09:42:50 Config A/D Result=40 09:42:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:50 Get A/D filter: -9.255963e+061 result=40 09:42:50 Get A/D value=-858993460 result=40 09:42:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:50 Aux= 09:42:50 Message to Camera, serial 101815 queued 09:43:27 Received message from Master: op=PointingHead serial=101828 09:43:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:43:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:43:28 Point started: ret=0 09:43:28 point_skyscan result=0 09:43:28 Check angles 09:43:28 SkyScan query 09:43:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:43:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:43:29 Message to Master queued w/err=0: serial=101828 error=0 09:43:34 Received message from Master: op=Filter serial=101829 09:43:34 Color wheel filter change from 0 to 0 09:43:34 FLIGetFilterPos err=0 currentPosition=0 09:43:34 FLIGetStepsRemaining err=0 RemainingSteps=0 09:43:34 Filter is already there-color wheel unchanged 09:43:34 Received message from Master: op=Shutter serial=101830 09:43:34 Shutter LASER close 09:43:34 Received message from Camera: op=State serial=101832 09:43:34 GetSingleValue result=40 Value=cccccccc 09:43:34 SkyScan query 09:43:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:43:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:35 Parameters OK 09:43:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:35 Set A/D data flow result=40 09:43:35 Set A/D channel type result=40 09:43:35 Set A/D encoding result=40 09:43:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:35 Set channel filter=0.000000e+000 result=40 09:43:35 Config A/D Result=40 09:43:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:35 Get A/D filter: -9.255963e+061 result=40 09:43:35 Get A/D value=-858993460 result=40 09:43:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:35 Parameters OK 09:43:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:35 Set A/D data flow result=40 09:43:35 Set A/D channel type result=40 09:43:35 Set A/D encoding result=40 09:43:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:35 Set channel filter=0.000000e+000 result=40 09:43:35 Config A/D Result=40 09:43:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:35 Get A/D filter: -9.255963e+061 result=40 09:43:35 Get A/D value=-858993460 result=40 09:43:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:43:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:43:35 Aux= 09:43:35 Message to Camera, serial 101832 queued [UTC 2019-3-4 09:43:50] 09:44:12 Received message from Master: op=PointingHead serial=101845 09:44:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:44:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:44:12 Point started: ret=0 09:44:12 point_skyscan result=0 09:44:13 Check angles 09:44:13 SkyScan query 09:44:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 09:44:13 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 09:44:13 Check angles 09:44:13 SkyScan query 09:44:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.775<-14985 Statuses=0008 0009 09:44:14 Msec=750 True Az=112.995 Ze=-44.775 Az status=0008 Ze status=0009 09:44:14 Check angles 09:44:14 SkyScan query 09:44:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.745<-16383 Statuses=0008 0009 09:44:15 Msec=1500 True Az=112.995 Ze=-65.745 Az status=0008 Ze status=0009 09:44:15 Check angles 09:44:15 SkyScan query 09:44:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 09:44:15 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 09:44:16 Check angles 09:44:16 SkyScan query 09:44:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.105<-19207 Statuses=0008 0009 09:44:16 Msec=3000 True Az=112.995 Ze=-108.105 Az status=0008 Ze status=0009 09:44:16 Check angles 09:44:16 SkyScan query 09:44:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.06<-20604 Statuses=0008 0009 09:44:17 Msec=3750 True Az=112.995 Ze=-129.06 Az status=0008 Ze status=0009 09:44:17 Check angles 09:44:17 SkyScan query 09:44:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.03<-22002 Statuses=0008 0009 09:44:18 Msec=4500 True Az=112.995 Ze=-150.03 Az status=0008 Ze status=0009 09:44:18 Check angles 09:44:18 SkyScan query 09:44:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.88<-23392 Statuses=0008 0009 09:44:18 Msec=5250 True Az=112.995 Ze=-170.88 Az status=0008 Ze status=0009 09:44:19 Check angles 09:44:19 SkyScan query 09:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:44:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:44:19 Message to Master queued w/err=0: serial=101845 error=0 09:44:24 Received message from Master: op=Filter serial=101846 09:44:24 Color wheel filter change from 0 to 0 09:44:24 FLIGetFilterPos err=0 currentPosition=0 09:44:24 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:24 Filter is already there-color wheel unchanged 09:44:24 Received message from Master: op=Shutter serial=101847 09:44:24 Shutter LASER open 09:44:25 Received message from Camera: op=State serial=101849 09:44:25 GetSingleValue result=40 Value=cccccccc 09:44:25 SkyScan query 09:44:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:44:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:25 Parameters OK 09:44:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:25 Set A/D data flow result=40 09:44:25 Set A/D channel type result=40 09:44:25 Set A/D encoding result=40 09:44:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:25 Set channel filter=0.000000e+000 result=40 09:44:25 Config A/D Result=40 09:44:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:25 Get A/D filter: -9.255963e+061 result=40 09:44:25 Get A/D value=-858993460 result=40 09:44:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:25 Parameters OK 09:44:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:25 Set A/D data flow result=40 09:44:25 Set A/D channel type result=40 09:44:25 Set A/D encoding result=40 09:44:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:25 Set channel filter=0.000000e+000 result=40 09:44:25 Config A/D Result=40 09:44:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:25 Get A/D filter: -9.255963e+061 result=40 09:44:25 Get A/D value=-858993460 result=40 09:44:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:25 Aux= 09:44:25 Message to Camera, serial 101849 queued 09:44:34 Received message from Master: op=Shutter serial=101859 09:44:34 Shutter LASER close 09:44:34 Received message from Master: op=PointingHead serial=101863 09:44:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:44:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:44:35 Point started: ret=0 09:44:35 point_skyscan result=0 09:44:35 Check angles 09:44:35 SkyScan query 09:44:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 09:44:36 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 09:44:36 Check angles 09:44:36 SkyScan query 09:44:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.89<-20126 Statuses=0008 0009 09:44:37 Msec=750 True Az=112.995 Ze=-121.89 Az status=0008 Ze status=0009 09:44:37 Check angles 09:44:37 SkyScan query 09:44:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.515<-18701 Statuses=0008 0009 09:44:37 Msec=1500 True Az=112.995 Ze=-100.515 Az status=0008 Ze status=0009 09:44:38 Check angles 09:44:38 SkyScan query 09:44:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.545<-17303 Statuses=0008 0009 09:44:38 Msec=2250 True Az=112.995 Ze=-79.545 Az status=0008 Ze status=0009 09:44:38 Check angles 09:44:38 SkyScan query 09:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.605<-15907 Statuses=0008 0009 09:44:39 Msec=3000 True Az=112.995 Ze=-58.605 Az status=0008 Ze status=0009 09:44:39 Check angles 09:44:39 SkyScan query 09:44:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.65<-14510 Statuses=0008 0009 09:44:40 Msec=3750 True Az=112.995 Ze=-37.65 Az status=0008 Ze status=0009 09:44:40 Check angles 09:44:40 SkyScan query 09:44:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.71<-13114 Statuses=0008 0009 09:44:40 Msec=4500 True Az=112.995 Ze=-16.71 Az status=0008 Ze status=0009 09:44:41 Check angles 09:44:41 SkyScan query 09:44:41 SkyScan query done: ret=0 az=112.995<-7533 ze=4.2<-11720 Statuses=0008 0009 09:44:41 Msec=5250 True Az=112.995 Ze=4.2 Az status=0008 Ze status=0009 09:44:41 Check angles 09:44:41 SkyScan query 09:44:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:44:42 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:44:42 Message to Master queued w/err=0: serial=101863 error=0 09:44:47 Received message from Master: op=Filter serial=101864 09:44:47 Color wheel filter change from 0 to 0 09:44:47 FLIGetFilterPos err=0 currentPosition=0 09:44:47 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:47 Filter is already there-color wheel unchanged 09:44:47 Received message from Master: op=Shutter serial=101865 09:44:47 Shutter LASER close 09:44:47 Received message from Camera: op=State serial=101867 09:44:47 GetSingleValue result=40 Value=cccccccc 09:44:47 SkyScan query 09:44:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:44:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:48 Parameters OK 09:44:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:48 Set A/D data flow result=40 09:44:48 Set A/D channel type result=40 09:44:48 Set A/D encoding result=40 09:44:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:48 Set channel filter=0.000000e+000 result=40 09:44:48 Config A/D Result=40 09:44:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:48 Get A/D filter: -9.255963e+061 result=40 09:44:48 Get A/D value=-858993460 result=40 09:44:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:48 Parameters OK 09:44:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:48 Set A/D data flow result=40 09:44:48 Set A/D channel type result=40 09:44:48 Set A/D encoding result=40 09:44:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:48 Set channel filter=0.000000e+000 result=40 09:44:48 Config A/D Result=40 09:44:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:48 Get A/D filter: -9.255963e+061 result=40 09:44:48 Get A/D value=-858993460 result=40 09:44:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:48 Aux= 09:44:48 Message to Camera, serial 101867 queued 09:45:25 Received message from Master: op=PointingHead serial=101880 09:45:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:45:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:45:25 Point started: ret=0 09:45:25 point_skyscan result=0 09:45:26 Check angles 09:45:26 SkyScan query 09:45:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:45:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:45:26 Message to Master queued w/err=0: serial=101880 error=0 09:45:31 Received message from Master: op=Filter serial=101881 09:45:31 Color wheel filter change from 0 to 0 09:45:31 FLIGetFilterPos err=0 currentPosition=0 09:45:31 FLIGetStepsRemaining err=0 RemainingSteps=0 09:45:31 Filter is already there-color wheel unchanged 09:45:32 Received message from Master: op=Shutter serial=101882 09:45:32 Shutter LASER close 09:45:32 Received message from Camera: op=State serial=101884 09:45:32 GetSingleValue result=40 Value=cccccccc 09:45:32 SkyScan query 09:45:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:45:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:32 Parameters OK 09:45:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:32 Set A/D data flow result=40 09:45:32 Set A/D channel type result=40 09:45:32 Set A/D encoding result=40 09:45:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:32 Set channel filter=0.000000e+000 result=40 09:45:32 Config A/D Result=40 09:45:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:32 Get A/D filter: -9.255963e+061 result=40 09:45:32 Get A/D value=-858993460 result=40 09:45:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:32 Parameters OK 09:45:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:32 Set A/D data flow result=40 09:45:32 Set A/D channel type result=40 09:45:32 Set A/D encoding result=40 09:45:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:32 Set channel filter=0.000000e+000 result=40 09:45:32 Config A/D Result=40 09:45:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:32 Get A/D filter: -9.255963e+061 result=40 09:45:32 Get A/D value=-858993460 result=40 09:45:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:45:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:45:32 Aux= 09:45:32 Message to Camera, serial 101884 queued 09:46:09 Received message from Master: op=PointingHead serial=101897 09:46:09 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:46:09 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:46:09 Point started: ret=0 09:46:09 point_skyscan result=0 09:46:10 Check angles 09:46:10 SkyScan query 09:46:11 SkyScan query done: ret=0 az=136.35<-9090 ze=-6.51<-12434 Statuses=0009 0008 09:46:11 Msec=0 True Az=136.35 Ze=-6.51 Az status=0009 Ze status=0008 09:46:11 Check angles 09:46:11 SkyScan query 09:46:11 SkyScan query done: ret=0 az=154.155<-10277 ze=-6.51<-12434 Statuses=0009 0008 09:46:11 Msec=750 True Az=154.155 Ze=-6.51 Az status=0009 Ze status=0008 09:46:12 Check angles 09:46:12 SkyScan query 09:46:12 SkyScan query done: ret=0 az=171.6<-11440 ze=-6.495<-12433 Statuses=0009 0008 09:46:12 Msec=1500 True Az=171.6 Ze=-6.495 Az status=0009 Ze status=0008 09:46:12 Check angles 09:46:12 SkyScan query 09:46:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:46:13 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:46:13 Message to Master queued w/err=0: serial=101897 error=0 09:46:18 Received message from Master: op=Filter serial=101898 09:46:18 Color wheel filter change from 0 to 0 09:46:18 FLIGetFilterPos err=0 currentPosition=0 09:46:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:46:18 Filter is already there-color wheel unchanged 09:46:18 Received message from Master: op=Shutter serial=101899 09:46:18 Shutter LASER close 09:46:18 Received message from Camera: op=State serial=101901 09:46:18 GetSingleValue result=40 Value=cccccccc 09:46:18 SkyScan query 09:46:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:46:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:19 Parameters OK 09:46:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:19 Set A/D data flow result=40 09:46:19 Set A/D channel type result=40 09:46:19 Set A/D encoding result=40 09:46:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:19 Set channel filter=0.000000e+000 result=40 09:46:19 Config A/D Result=40 09:46:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:19 Get A/D filter: -9.255963e+061 result=40 09:46:19 Get A/D value=-858993460 result=40 09:46:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:19 Parameters OK 09:46:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:19 Set A/D data flow result=40 09:46:19 Set A/D channel type result=40 09:46:19 Set A/D encoding result=40 09:46:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:19 Set channel filter=0.000000e+000 result=40 09:46:19 Config A/D Result=40 09:46:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:19 Get A/D filter: -9.255963e+061 result=40 09:46:19 Get A/D value=-858993460 result=40 09:46:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:46:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:46:19 Aux= 09:46:19 Message to Camera, serial 101901 queued 09:46:56 Received message from Master: op=PointingHead serial=101914 09:46:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:46:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:46:56 Point started: ret=0 09:46:56 point_skyscan result=0 09:46:57 Check angles 09:46:57 SkyScan query 09:46:57 SkyScan query done: ret=0 az=152.505<-10167 ze=6.51<-11566 Statuses=0009 0008 09:46:57 Msec=0 True Az=152.505 Ze=6.51 Az status=0009 Ze status=0008 09:46:57 Check angles 09:46:57 SkyScan query 09:46:58 SkyScan query done: ret=0 az=134.64<-8976 ze=6.495<-11567 Statuses=0009 0008 09:46:58 Msec=750 True Az=134.64 Ze=6.495 Az status=0009 Ze status=0008 09:46:58 Check angles 09:46:58 SkyScan query 09:46:59 SkyScan query done: ret=0 az=117.225<-7815 ze=6.495<-11567 Statuses=0009 0008 09:46:59 Msec=1500 True Az=117.225 Ze=6.495 Az status=0009 Ze status=0008 09:46:59 Check angles 09:46:59 SkyScan query 09:47:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:47:00 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:47:00 Message to Master queued w/err=0: serial=101914 error=0 09:47:05 Received message from Master: op=Filter serial=101915 09:47:05 Color wheel filter change from 0 to 0 09:47:05 FLIGetFilterPos err=0 currentPosition=0 09:47:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:47:05 Filter is already there-color wheel unchanged 09:47:05 Received message from Master: op=Shutter serial=101916 09:47:05 Shutter LASER close 09:47:05 Received message from Camera: op=State serial=101918 09:47:05 GetSingleValue result=40 Value=cccccccc 09:47:05 SkyScan query 09:47:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:47:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:05 Parameters OK 09:47:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:05 Set A/D data flow result=40 09:47:05 Set A/D channel type result=40 09:47:05 Set A/D encoding result=40 09:47:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:05 Set channel filter=0.000000e+000 result=40 09:47:05 Config A/D Result=40 09:47:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:05 Get A/D filter: -9.255963e+061 result=40 09:47:05 Get A/D value=-858993460 result=40 09:47:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:05 Parameters OK 09:47:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:05 Set A/D data flow result=40 09:47:05 Set A/D channel type result=40 09:47:05 Set A/D encoding result=40 09:47:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:05 Set channel filter=0.000000e+000 result=40 09:47:05 Config A/D Result=40 09:47:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:05 Get A/D filter: -9.255963e+061 result=40 09:47:05 Get A/D value=-858993460 result=40 09:47:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:47:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:47:05 Aux= 09:47:05 Message to Camera, serial 101918 queued 09:47:42 Received message from Master: op=PointingHead serial=101931 09:47:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:47:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:47:42 Point started: ret=0 09:47:42 point_skyscan result=0 09:47:43 Check angles 09:47:43 SkyScan query 09:47:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 09:47:44 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 09:47:44 Check angles 09:47:44 SkyScan query 09:47:45 SkyScan query done: ret=0 az=112.98<-7532 ze=-44.28<-14952 Statuses=0008 0009 09:47:45 Msec=750 True Az=112.98 Ze=-44.28 Az status=0008 Ze status=0009 09:47:45 Check angles 09:47:45 SkyScan query 09:47:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.205<-16347 Statuses=0008 0009 09:47:45 Msec=1500 True Az=112.995 Ze=-65.205 Az status=0008 Ze status=0009 09:47:45 Check angles 09:47:45 SkyScan query 09:47:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.16<-17744 Statuses=0008 0009 09:47:46 Msec=2250 True Az=112.995 Ze=-86.16 Az status=0008 Ze status=0009 09:47:46 Check angles 09:47:46 SkyScan query 09:47:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.1<-19140 Statuses=0008 0009 09:47:47 Msec=3000 True Az=112.995 Ze=-107.1 Az status=0008 Ze status=0009 09:47:47 Check angles 09:47:47 SkyScan query 09:47:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.055<-20537 Statuses=0008 0009 09:47:48 Msec=3750 True Az=112.995 Ze=-128.055 Az status=0008 Ze status=0009 09:47:48 Check angles 09:47:48 SkyScan query 09:47:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.01<-21934 Statuses=0008 0009 09:47:48 Msec=4500 True Az=112.995 Ze=-149.01 Az status=0008 Ze status=0009 09:47:48 Check angles 09:47:48 SkyScan query 09:47:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.95<-23330 Statuses=0008 0009 09:47:49 Msec=5250 True Az=112.995 Ze=-169.95 Az status=0008 Ze status=0009 09:47:49 Check angles 09:47:49 SkyScan query 09:47:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:47:50 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:47:50 Message to Master queued w/err=0: serial=101931 error=0 09:47:55 Received message from Master: op=Filter serial=101932 09:47:55 Color wheel filter change from 0 to 0 09:47:55 FLIGetFilterPos err=0 currentPosition=0 09:47:55 FLIGetStepsRemaining err=0 RemainingSteps=0 09:47:55 Filter is already there-color wheel unchanged 09:47:55 Received message from Master: op=Shutter serial=101933 09:47:55 Shutter LASER open 09:47:55 Received message from Camera: op=State serial=101935 09:47:55 GetSingleValue result=40 Value=cccccccc 09:47:55 SkyScan query 09:47:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:47:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:56 Parameters OK 09:47:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:56 Set A/D data flow result=40 09:47:56 Set A/D channel type result=40 09:47:56 Set A/D encoding result=40 09:47:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:56 Set channel filter=0.000000e+000 result=40 09:47:56 Config A/D Result=40 09:47:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:56 Get A/D filter: -9.255963e+061 result=40 09:47:56 Get A/D value=-858993460 result=40 09:47:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:56 Parameters OK 09:47:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:56 Set A/D data flow result=40 09:47:56 Set A/D channel type result=40 09:47:56 Set A/D encoding result=40 09:47:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:56 Set channel filter=0.000000e+000 result=40 09:47:56 Config A/D Result=40 09:47:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:56 Get A/D filter: -9.255963e+061 result=40 09:47:56 Get A/D value=-858993460 result=40 09:47:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:47:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:47:56 Aux= 09:47:56 Message to Camera, serial 101935 queued 09:48:04 Received message from Master: op=Shutter serial=101945 09:48:04 Shutter LASER close 09:48:05 Received message from Master: op=PointingHead serial=101949 09:48:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:48:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:48:05 Point started: ret=0 09:48:05 point_skyscan result=0 09:48:06 Check angles 09:48:06 SkyScan query 09:48:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.31<-21554 Statuses=0008 0009 09:48:06 Msec=0 True Az=112.995 Ze=-143.31 Az status=0008 Ze status=0009 09:48:06 Check angles 09:48:06 SkyScan query 09:48:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 09:48:07 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 09:48:07 Check angles 09:48:07 SkyScan query 09:48:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 09:48:08 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 09:48:08 Check angles 09:48:08 SkyScan query 09:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.995<-17333 Statuses=0008 0009 09:48:09 Msec=2250 True Az=112.995 Ze=-79.995 Az status=0008 Ze status=0009 09:48:09 Check angles 09:48:09 SkyScan query 09:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.055<-15937 Statuses=0008 0009 09:48:09 Msec=3000 True Az=112.995 Ze=-59.055 Az status=0008 Ze status=0009 09:48:09 Check angles 09:48:09 SkyScan query 09:48:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.04<-14536 Statuses=0008 0009 09:48:10 Msec=3750 True Az=112.995 Ze=-38.04 Az status=0008 Ze status=0009 09:48:10 Check angles 09:48:10 SkyScan query 09:48:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.115<-13141 Statuses=0008 0009 09:48:11 Msec=4500 True Az=112.995 Ze=-17.115 Az status=0008 Ze status=0009 09:48:11 Check angles 09:48:11 SkyScan query 09:48:12 SkyScan query done: ret=0 az=112.995<-7533 ze=3.855<-11743 Statuses=0008 0009 09:48:12 Msec=5250 True Az=112.995 Ze=3.855 Az status=0008 Ze status=0009 09:48:12 Check angles 09:48:12 SkyScan query 09:48:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:48:12 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:48:12 Message to Master queued w/err=0: serial=101949 error=0 09:48:17 Received message from Master: op=Filter serial=101950 09:48:17 Color wheel filter change from 0 to 0 09:48:17 FLIGetFilterPos err=0 currentPosition=0 09:48:17 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:17 Filter is already there-color wheel unchanged 09:48:17 Received message from Master: op=Shutter serial=101951 09:48:17 Shutter LASER close 09:48:18 Received message from Camera: op=State serial=101953 09:48:18 GetSingleValue result=40 Value=cccccccc 09:48:18 SkyScan query 09:48:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:48:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:18 Parameters OK 09:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:18 Set A/D data flow result=40 09:48:18 Set A/D channel type result=40 09:48:18 Set A/D encoding result=40 09:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:18 Set channel filter=0.000000e+000 result=40 09:48:18 Config A/D Result=40 09:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:18 Get A/D filter: -9.255963e+061 result=40 09:48:18 Get A/D value=-858993460 result=40 09:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:18 Parameters OK 09:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:18 Set A/D data flow result=40 09:48:18 Set A/D channel type result=40 09:48:18 Set A/D encoding result=40 09:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:18 Set channel filter=0.000000e+000 result=40 09:48:18 Config A/D Result=40 09:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:18 Get A/D filter: -9.255963e+061 result=40 09:48:18 Get A/D value=-858993460 result=40 09:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:48:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:48:18 Aux= 09:48:18 Message to Camera, serial 101953 queued 09:48:55 Received message from Master: op=PointingHead serial=101966 09:48:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:48:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:48:55 Point started: ret=0 09:48:55 point_skyscan result=0 09:48:56 Check angles 09:48:56 SkyScan query 09:48:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:48:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:48:57 Message to Master queued w/err=0: serial=101966 error=0 09:49:02 Received message from Master: op=Filter serial=101967 09:49:02 Color wheel filter change from 0 to 0 09:49:02 FLIGetFilterPos err=0 currentPosition=0 09:49:02 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:02 Filter is already there-color wheel unchanged 09:49:02 Received message from Master: op=Shutter serial=101968 09:49:02 Shutter LASER close 09:49:02 Received message from Camera: op=State serial=101970 09:49:02 GetSingleValue result=40 Value=cccccccc 09:49:02 SkyScan query 09:49:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:49:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:03 Parameters OK 09:49:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:03 Set A/D data flow result=40 09:49:03 Set A/D channel type result=40 09:49:03 Set A/D encoding result=40 09:49:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:03 Set channel filter=0.000000e+000 result=40 09:49:03 Config A/D Result=40 09:49:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:03 Get A/D filter: -9.255963e+061 result=40 09:49:03 Get A/D value=-858993460 result=40 09:49:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:03 Parameters OK 09:49:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:03 Set A/D data flow result=40 09:49:03 Set A/D channel type result=40 09:49:03 Set A/D encoding result=40 09:49:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:03 Set channel filter=0.000000e+000 result=40 09:49:03 Config A/D Result=40 09:49:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:03 Get A/D filter: -9.255963e+061 result=40 09:49:03 Get A/D value=-858993460 result=40 09:49:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:03 Aux= 09:49:03 Message to Camera, serial 101970 queued 09:49:38 Received message from Master: op=PointingHead serial=101982 09:49:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:49:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:49:39 Point started: ret=0 09:49:39 point_skyscan result=0 09:49:40 Check angles 09:49:40 SkyScan query 09:49:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:49:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:49:40 Message to Master queued w/err=0: serial=101982 error=0 09:49:45 Received message from Master: op=Filter serial=101983 09:49:45 Color wheel filter change from 0 to 0 09:49:45 FLIGetFilterPos err=0 currentPosition=0 09:49:45 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:45 Filter is already there-color wheel unchanged 09:49:45 Received message from Master: op=Shutter serial=101984 09:49:45 Shutter LASER close 09:49:45 Received message from Camera: op=State serial=101986 09:49:45 GetSingleValue result=40 Value=cccccccc 09:49:45 SkyScan query 09:49:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:49:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:46 Parameters OK 09:49:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:46 Set A/D data flow result=40 09:49:46 Set A/D channel type result=40 09:49:46 Set A/D encoding result=40 09:49:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:46 Set channel filter=0.000000e+000 result=40 09:49:46 Config A/D Result=40 09:49:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:46 Get A/D filter: -9.255963e+061 result=40 09:49:46 Get A/D value=-858993460 result=40 09:49:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:46 Parameters OK 09:49:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:46 Set A/D data flow result=40 09:49:46 Set A/D channel type result=40 09:49:46 Set A/D encoding result=40 09:49:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:46 Set channel filter=0.000000e+000 result=40 09:49:46 Config A/D Result=40 09:49:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:46 Get A/D filter: -9.255963e+061 result=40 09:49:46 Get A/D value=-858993460 result=40 09:49:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:46 Aux= 09:49:46 Message to Camera, serial 101986 queued 09:50:23 Received message from Master: op=PointingHead serial=101999 09:50:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:50:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:50:23 Point started: ret=0 09:50:23 point_skyscan result=0 09:50:24 Check angles 09:50:24 SkyScan query 09:50:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:50:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:50:24 Message to Master queued w/err=0: serial=101999 error=0 09:50:29 Received message from Master: op=Filter serial=102000 09:50:29 Color wheel filter change from 0 to 0 09:50:29 FLIGetFilterPos err=0 currentPosition=0 09:50:29 FLIGetStepsRemaining err=0 RemainingSteps=0 09:50:29 Filter is already there-color wheel unchanged 09:50:30 Received message from Master: op=Shutter serial=102001 09:50:30 Shutter LASER close 09:50:30 Received message from Camera: op=State serial=102003 09:50:30 GetSingleValue result=40 Value=cccccccc 09:50:30 SkyScan query 09:50:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:50:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:30 Parameters OK 09:50:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:30 Set A/D data flow result=40 09:50:30 Set A/D channel type result=40 09:50:30 Set A/D encoding result=40 09:50:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:30 Set channel filter=0.000000e+000 result=40 09:50:30 Config A/D Result=40 09:50:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:30 Get A/D filter: -9.255963e+061 result=40 09:50:30 Get A/D value=-858993460 result=40 09:50:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:30 Parameters OK 09:50:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:30 Set A/D data flow result=40 09:50:30 Set A/D channel type result=40 09:50:30 Set A/D encoding result=40 09:50:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:30 Set channel filter=0.000000e+000 result=40 09:50:30 Config A/D Result=40 09:50:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:30 Get A/D filter: -9.255963e+061 result=40 09:50:30 Get A/D value=-858993460 result=40 09:50:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:50:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:50:30 Aux= 09:50:30 Message to Camera, serial 102003 queued 09:51:07 Received message from Master: op=PointingHead serial=102016 09:51:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:51:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:51:07 Point started: ret=0 09:51:07 point_skyscan result=0 09:51:08 Check angles 09:51:08 SkyScan query 09:51:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.61<-13574 Statuses=0008 0009 09:51:09 Msec=0 True Az=112.995 Ze=-23.61 Az status=0008 Ze status=0009 09:51:09 Check angles 09:51:09 SkyScan query 09:51:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 09:51:09 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 09:51:10 Check angles 09:51:10 SkyScan query 09:51:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.94<-16396 Statuses=0008 0009 09:51:10 Msec=1500 True Az=112.995 Ze=-65.94 Az status=0008 Ze status=0009 09:51:10 Check angles 09:51:10 SkyScan query 09:51:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.91<-17794 Statuses=0008 0009 09:51:11 Msec=2250 True Az=112.995 Ze=-86.91 Az status=0008 Ze status=0009 09:51:11 Check angles 09:51:11 SkyScan query 09:51:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.865<-19191 Statuses=0008 0009 09:51:12 Msec=3000 True Az=112.995 Ze=-107.865 Az status=0008 Ze status=0009 09:51:12 Check angles 09:51:12 SkyScan query 09:51:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.82<-20588 Statuses=0008 0009 09:51:12 Msec=3750 True Az=112.995 Ze=-128.82 Az status=0008 Ze status=0009 09:51:13 Check angles 09:51:13 SkyScan query 09:51:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.805<-21987 Statuses=0008 0009 09:51:13 Msec=4500 True Az=112.995 Ze=-149.805 Az status=0008 Ze status=0009 09:51:13 Check angles 09:51:13 SkyScan query 09:51:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.7<-23380 Statuses=0008 0009 09:51:14 Msec=5250 True Az=112.995 Ze=-170.7 Az status=0008 Ze status=0009 09:51:14 Check angles 09:51:14 SkyScan query 09:51:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:51:15 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:51:15 Message to Master queued w/err=0: serial=102016 error=0 09:51:20 Received message from Master: op=Filter serial=102017 09:51:20 Color wheel filter change from 0 to 0 09:51:20 FLIGetFilterPos err=0 currentPosition=0 09:51:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:20 Filter is already there-color wheel unchanged 09:51:20 Received message from Master: op=Shutter serial=102018 09:51:20 Shutter LASER open 09:51:20 Received message from Camera: op=State serial=102020 09:51:20 GetSingleValue result=40 Value=cccccccc 09:51:20 SkyScan query 09:51:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:51:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:21 Parameters OK 09:51:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:21 Set A/D data flow result=40 09:51:21 Set A/D channel type result=40 09:51:21 Set A/D encoding result=40 09:51:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:21 Set channel filter=0.000000e+000 result=40 09:51:21 Config A/D Result=40 09:51:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:21 Get A/D filter: -9.255963e+061 result=40 09:51:21 Get A/D value=-858993460 result=40 09:51:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:21 Parameters OK 09:51:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:21 Set A/D data flow result=40 09:51:21 Set A/D channel type result=40 09:51:21 Set A/D encoding result=40 09:51:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:21 Set channel filter=0.000000e+000 result=40 09:51:21 Config A/D Result=40 09:51:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:21 Get A/D filter: -9.255963e+061 result=40 09:51:21 Get A/D value=-858993460 result=40 09:51:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:21 Aux= 09:51:21 Message to Camera, serial 102020 queued 09:51:29 Received message from Master: op=Shutter serial=102030 09:51:29 Shutter LASER close 09:51:30 Received message from Master: op=PointingHead serial=102034 09:51:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:51:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:51:30 Point started: ret=0 09:51:30 point_skyscan result=0 09:51:31 Check angles 09:51:31 SkyScan query 09:51:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 09:51:31 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 09:51:32 Check angles 09:51:32 SkyScan query 09:51:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.205<-20147 Statuses=0008 0009 09:51:32 Msec=750 True Az=112.995 Ze=-122.205 Az status=0008 Ze status=0009 09:51:32 Check angles 09:51:32 SkyScan query 09:51:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.28<-18752 Statuses=0008 0009 09:51:33 Msec=1500 True Az=112.995 Ze=-101.28 Az status=0008 Ze status=0009 09:51:33 Check angles 09:51:33 SkyScan query 09:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.295<-17353 Statuses=0008 0009 09:51:34 Msec=2250 True Az=112.995 Ze=-80.295 Az status=0008 Ze status=0009 09:51:34 Check angles 09:51:34 SkyScan query 09:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.355<-15957 Statuses=0008 0009 09:51:34 Msec=3000 True Az=112.995 Ze=-59.355 Az status=0008 Ze status=0009 09:51:35 Check angles 09:51:35 SkyScan query 09:51:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.355<-14557 Statuses=0008 0009 09:51:35 Msec=3750 True Az=112.995 Ze=-38.355 Az status=0008 Ze status=0009 09:51:35 Check angles 09:51:35 SkyScan query 09:51:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.43<-13162 Statuses=0008 0009 09:51:36 Msec=4500 True Az=112.995 Ze=-17.43 Az status=0008 Ze status=0009 09:51:36 Check angles 09:51:36 SkyScan query 09:51:37 SkyScan query done: ret=0 az=112.995<-7533 ze=3.555<-11763 Statuses=0008 0009 09:51:37 Msec=5250 True Az=112.995 Ze=3.555 Az status=0008 Ze status=0009 09:51:37 Check angles 09:51:37 SkyScan query 09:51:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:51:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:51:37 Message to Master queued w/err=0: serial=102034 error=0 09:51:42 Received message from Master: op=Filter serial=102035 09:51:42 Color wheel filter change from 0 to 0 09:51:42 FLIGetFilterPos err=0 currentPosition=0 09:51:42 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:42 Filter is already there-color wheel unchanged 09:51:43 Received message from Master: op=Shutter serial=102036 09:51:43 Shutter LASER close 09:51:43 Received message from Camera: op=State serial=102038 09:51:43 GetSingleValue result=40 Value=cccccccc 09:51:43 SkyScan query 09:51:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:51:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:43 Parameters OK 09:51:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:43 Set A/D data flow result=40 09:51:43 Set A/D channel type result=40 09:51:43 Set A/D encoding result=40 09:51:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:43 Set channel filter=0.000000e+000 result=40 09:51:43 Config A/D Result=40 09:51:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:43 Get A/D filter: -9.255963e+061 result=40 09:51:43 Get A/D value=-858993460 result=40 09:51:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:43 Parameters OK 09:51:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:43 Set A/D data flow result=40 09:51:43 Set A/D channel type result=40 09:51:43 Set A/D encoding result=40 09:51:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:43 Set channel filter=0.000000e+000 result=40 09:51:43 Config A/D Result=40 09:51:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:43 Get A/D filter: -9.255963e+061 result=40 09:51:43 Get A/D value=-858993460 result=40 09:51:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:43 Aux= 09:51:43 Message to Camera, serial 102038 queued 09:52:20 Received message from Master: op=PointingHead serial=102051 09:52:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:52:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:52:20 Point started: ret=0 09:52:20 point_skyscan result=0 09:52:21 Check angles 09:52:21 SkyScan query 09:52:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:52:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:52:22 Message to Master queued w/err=0: serial=102051 error=0 09:52:27 Received message from Master: op=Filter serial=102052 09:52:27 Color wheel filter change from 0 to 0 09:52:27 FLIGetFilterPos err=0 currentPosition=0 09:52:27 FLIGetStepsRemaining err=0 RemainingSteps=0 09:52:27 Filter is already there-color wheel unchanged 09:52:27 Received message from Master: op=Shutter serial=102053 09:52:27 Shutter LASER close 09:52:27 Received message from Camera: op=State serial=102055 09:52:27 GetSingleValue result=40 Value=cccccccc 09:52:27 SkyScan query 09:52:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:52:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:28 Parameters OK 09:52:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:28 Set A/D data flow result=40 09:52:28 Set A/D channel type result=40 09:52:28 Set A/D encoding result=40 09:52:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:28 Set channel filter=0.000000e+000 result=40 09:52:28 Config A/D Result=40 09:52:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:28 Get A/D filter: -9.255963e+061 result=40 09:52:28 Get A/D value=-858993460 result=40 09:52:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:28 Parameters OK 09:52:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:28 Set A/D data flow result=40 09:52:28 Set A/D channel type result=40 09:52:28 Set A/D encoding result=40 09:52:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:28 Set channel filter=0.000000e+000 result=40 09:52:28 Config A/D Result=40 09:52:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:28 Get A/D filter: -9.255963e+061 result=40 09:52:28 Get A/D value=-858993460 result=40 09:52:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:52:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:52:28 Aux= 09:52:28 Message to Camera, serial 102055 queued 09:53:04 Received message from Master: op=PointingHead serial=102068 09:53:04 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:53:04 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:53:05 Point started: ret=0 09:53:05 point_skyscan result=0 09:53:05 Check angles 09:53:05 SkyScan query 09:53:06 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 09:53:06 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 09:53:06 Check angles 09:53:06 SkyScan query 09:53:07 SkyScan query done: ret=0 az=153.51<-10234 ze=-6.495<-12433 Statuses=0009 0008 09:53:07 Msec=750 True Az=153.51 Ze=-6.495 Az status=0009 Ze status=0008 09:53:07 Check angles 09:53:07 SkyScan query 09:53:08 SkyScan query done: ret=0 az=170.985<-11399 ze=-6.495<-12433 Statuses=0009 0008 09:53:08 Msec=1500 True Az=170.985 Ze=-6.495 Az status=0009 Ze status=0008 09:53:08 Check angles 09:53:08 SkyScan query 09:53:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:53:08 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 09:53:08 Message to Master queued w/err=0: serial=102068 error=0 09:53:13 Received message from Master: op=Filter serial=102069 09:53:13 Color wheel filter change from 0 to 0 09:53:13 FLIGetFilterPos err=0 currentPosition=0 09:53:13 FLIGetStepsRemaining err=0 RemainingSteps=0 09:53:13 Filter is already there-color wheel unchanged 09:53:13 Received message from Master: op=Shutter serial=102070 09:53:13 Shutter LASER close 09:53:14 Received message from Camera: op=State serial=102072 09:53:14 GetSingleValue result=40 Value=cccccccc 09:53:14 SkyScan query 09:53:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:53:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:14 Parameters OK 09:53:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:14 Set A/D data flow result=40 09:53:14 Set A/D channel type result=40 09:53:14 Set A/D encoding result=40 09:53:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:14 Set channel filter=0.000000e+000 result=40 09:53:14 Config A/D Result=40 09:53:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:14 Get A/D filter: -9.255963e+061 result=40 09:53:14 Get A/D value=-858993460 result=40 09:53:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:14 Parameters OK 09:53:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:14 Set A/D data flow result=40 09:53:14 Set A/D channel type result=40 09:53:14 Set A/D encoding result=40 09:53:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:14 Set channel filter=0.000000e+000 result=40 09:53:14 Config A/D Result=40 09:53:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:14 Get A/D filter: -9.255963e+061 result=40 09:53:14 Get A/D value=-858993460 result=40 09:53:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:53:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:53:14 Aux= 09:53:14 Message to Camera, serial 102072 queued 09:53:51 Received message from Master: op=PointingHead serial=102085 09:53:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:53:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:53:51 Point started: ret=0 09:53:51 point_skyscan result=0 09:53:52 Check angles 09:53:52 SkyScan query 09:53:53 SkyScan query done: ret=0 az=152.925<-10195 ze=6.51<-11566 Statuses=0009 0008 09:53:53 Msec=0 True Az=152.925 Ze=6.51 Az status=0009 Ze status=0008 09:53:53 Check angles 09:53:53 SkyScan query 09:53:53 SkyScan query done: ret=0 az=135.06<-9004 ze=6.495<-11567 Statuses=0009 0008 09:53:53 Msec=750 True Az=135.06 Ze=6.495 Az status=0009 Ze status=0008 09:53:54 Check angles 09:53:54 SkyScan query 09:53:54 SkyScan query done: ret=0 az=117.63<-7842 ze=6.495<-11567 Statuses=0009 0008 09:53:54 Msec=1500 True Az=117.63 Ze=6.495 Az status=0009 Ze status=0008 09:53:54 Check angles 09:53:54 SkyScan query 09:53:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:53:55 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:53:55 Message to Master queued w/err=0: serial=102085 error=0 09:54:00 Received message from Master: op=Filter serial=102086 09:54:00 Color wheel filter change from 0 to 0 09:54:00 FLIGetFilterPos err=0 currentPosition=0 09:54:00 FLIGetStepsRemaining err=0 RemainingSteps=0 09:54:00 Filter is already there-color wheel unchanged 09:54:00 Received message from Master: op=Shutter serial=102087 09:54:00 Shutter LASER close 09:54:00 Received message from Camera: op=State serial=102089 09:54:00 GetSingleValue result=40 Value=cccccccc 09:54:00 SkyScan query 09:54:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:54:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:01 Parameters OK 09:54:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:01 Set A/D data flow result=40 09:54:01 Set A/D channel type result=40 09:54:01 Set A/D encoding result=40 09:54:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:01 Set channel filter=0.000000e+000 result=40 09:54:01 Config A/D Result=40 09:54:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:01 Get A/D filter: -9.255963e+061 result=40 09:54:01 Get A/D value=-858993460 result=40 09:54:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:01 Parameters OK 09:54:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:01 Set A/D data flow result=40 09:54:01 Set A/D channel type result=40 [UTC 2019-3-4 09:54:01] 09:54:01 Set A/D encoding result=40 09:54:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:01 Set channel filter=0.000000e+000 result=40 09:54:01 Config A/D Result=40 09:54:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:01 Get A/D filter: -9.255963e+061 result=40 09:54:01 Get A/D value=-858993460 result=40 09:54:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:54:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:54:01 Aux= 09:54:01 Message to Camera, serial 102089 queued 09:54:38 Received message from Master: op=PointingHead serial=102102 09:54:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:54:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:54:38 Point started: ret=0 09:54:38 point_skyscan result=0 09:54:39 Check angles 09:54:39 SkyScan query 09:54:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 09:54:39 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 09:54:39 Check angles 09:54:39 SkyScan query 09:54:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.045<-15003 Statuses=0008 0009 09:54:40 Msec=750 True Az=112.995 Ze=-45.045 Az status=0008 Ze status=0009 09:54:40 Check angles 09:54:40 SkyScan query 09:54:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.03<-16402 Statuses=0008 0009 09:54:41 Msec=1500 True Az=112.995 Ze=-66.03 Az status=0008 Ze status=0009 09:54:41 Check angles 09:54:41 SkyScan query 09:54:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.985<-17799 Statuses=0008 0009 09:54:41 Msec=2250 True Az=112.995 Ze=-86.985 Az status=0008 Ze status=0009 09:54:42 Check angles 09:54:42 SkyScan query 09:54:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.405<-19227 Statuses=0008 0009 09:54:42 Msec=3000 True Az=112.995 Ze=-108.405 Az status=0008 Ze status=0009 09:54:42 Check angles 09:54:42 SkyScan query 09:54:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.78<-20652 Statuses=0008 0009 09:54:43 Msec=3750 True Az=112.995 Ze=-129.78 Az status=0008 Ze status=0009 09:54:43 Check angles 09:54:43 SkyScan query 09:54:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.675<-22045 Statuses=0008 0009 09:54:44 Msec=4500 True Az=112.995 Ze=-150.675 Az status=0008 Ze status=0009 09:54:44 Check angles 09:54:44 SkyScan query 09:54:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.405<-23427 Statuses=0008 0009 09:54:45 Msec=5250 True Az=112.995 Ze=-171.405 Az status=0008 Ze status=0009 09:54:45 Check angles 09:54:45 SkyScan query 09:54:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:54:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:54:45 Message to Master queued w/err=0: serial=102102 error=0 09:54:50 Received message from Master: op=Filter serial=102103 09:54:50 Color wheel filter change from 0 to 0 09:54:50 FLIGetFilterPos err=0 currentPosition=0 09:54:50 FLIGetStepsRemaining err=0 RemainingSteps=0 09:54:50 Filter is already there-color wheel unchanged 09:54:50 Received message from Master: op=Shutter serial=102104 09:54:50 Shutter LASER open 09:54:51 Received message from Camera: op=State serial=102106 09:54:51 GetSingleValue result=40 Value=cccccccc 09:54:51 SkyScan query 09:54:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:54:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:51 Parameters OK 09:54:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:51 Set A/D data flow result=40 09:54:51 Set A/D channel type result=40 09:54:51 Set A/D encoding result=40 09:54:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:51 Set channel filter=0.000000e+000 result=40 09:54:51 Config A/D Result=40 09:54:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:51 Get A/D filter: -9.255963e+061 result=40 09:54:51 Get A/D value=-858993460 result=40 09:54:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:51 Parameters OK 09:54:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:51 Set A/D data flow result=40 09:54:51 Set A/D channel type result=40 09:54:51 Set A/D encoding result=40 09:54:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:51 Set channel filter=0.000000e+000 result=40 09:54:51 Config A/D Result=40 09:54:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:51 Get A/D filter: -9.255963e+061 result=40 09:54:51 Get A/D value=-858993460 result=40 09:54:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:54:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:54:51 Aux= 09:54:51 Message to Camera, serial 102106 queued 09:55:00 Received message from Master: op=Shutter serial=102116 09:55:00 Shutter LASER close 09:55:00 Received message from Master: op=PointingHead serial=102120 09:55:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:55:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:55:00 Point started: ret=0 09:55:00 point_skyscan result=0 09:55:01 Check angles 09:55:01 SkyScan query 09:55:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.1<-21540 Statuses=0008 0009 09:55:02 Msec=0 True Az=112.995 Ze=-143.1 Az status=0008 Ze status=0009 09:55:02 Check angles 09:55:02 SkyScan query 09:55:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.13<-20142 Statuses=0008 0009 09:55:03 Msec=750 True Az=112.995 Ze=-122.13 Az status=0008 Ze status=0009 09:55:03 Check angles 09:55:03 SkyScan query 09:55:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 09:55:03 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 09:55:03 Check angles 09:55:03 SkyScan query 09:55:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 09:55:04 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 09:55:04 Check angles 09:55:04 SkyScan query 09:55:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.31<-15954 Statuses=0008 0009 09:55:05 Msec=3000 True Az=112.995 Ze=-59.31 Az status=0008 Ze status=0009 09:55:05 Check angles 09:55:05 SkyScan query 09:55:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.31<-14554 Statuses=0008 0009 09:55:06 Msec=3750 True Az=112.995 Ze=-38.31 Az status=0008 Ze status=0009 09:55:06 Check angles 09:55:06 SkyScan query 09:55:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.34<-13156 Statuses=0008 0009 09:55:06 Msec=4500 True Az=112.995 Ze=-17.34 Az status=0008 Ze status=0009 09:55:06 Check angles 09:55:06 SkyScan query 09:55:07 SkyScan query done: ret=0 az=112.995<-7533 ze=3.63<-11758 Statuses=0008 0009 09:55:07 Msec=5250 True Az=112.995 Ze=3.63 Az status=0008 Ze status=0009 09:55:07 Check angles 09:55:07 SkyScan query 09:55:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:55:08 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:55:08 Message to Master queued w/err=0: serial=102120 error=0 09:55:13 Received message from Master: op=Filter serial=102121 09:55:13 Color wheel filter change from 0 to 0 09:55:13 FLIGetFilterPos err=0 currentPosition=0 09:55:13 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:13 Filter is already there-color wheel unchanged 09:55:13 Received message from Master: op=Shutter serial=102122 09:55:13 Shutter LASER close 09:55:13 Received message from Camera: op=State serial=102124 09:55:13 GetSingleValue result=40 Value=cccccccc 09:55:13 SkyScan query 09:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:55:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:14 Parameters OK 09:55:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:14 Set A/D data flow result=40 09:55:14 Set A/D channel type result=40 09:55:14 Set A/D encoding result=40 09:55:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:14 Set channel filter=0.000000e+000 result=40 09:55:14 Config A/D Result=40 09:55:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:14 Get A/D filter: -9.255963e+061 result=40 09:55:14 Get A/D value=-858993460 result=40 09:55:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:14 Parameters OK 09:55:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:14 Set A/D data flow result=40 09:55:14 Set A/D channel type result=40 09:55:14 Set A/D encoding result=40 09:55:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:14 Set channel filter=0.000000e+000 result=40 09:55:14 Config A/D Result=40 09:55:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:14 Get A/D filter: -9.255963e+061 result=40 09:55:14 Get A/D value=-858993460 result=40 09:55:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:14 Aux= 09:55:14 Message to Camera, serial 102124 queued 09:55:51 Received message from Master: op=PointingHead serial=102137 09:55:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:55:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:55:51 Point started: ret=0 09:55:51 point_skyscan result=0 09:55:52 Check angles 09:55:52 SkyScan query 09:55:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:55:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:55:52 Message to Master queued w/err=0: serial=102137 error=0 09:55:57 Received message from Master: op=Filter serial=102138 09:55:57 Color wheel filter change from 0 to 0 09:55:57 FLIGetFilterPos err=0 currentPosition=0 09:55:57 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:57 Filter is already there-color wheel unchanged 09:55:57 Received message from Master: op=Shutter serial=102139 09:55:57 Shutter LASER close 09:55:57 Received message from Camera: op=State serial=102141 09:55:57 GetSingleValue result=40 Value=cccccccc 09:55:57 SkyScan query 09:55:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:55:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:58 Parameters OK 09:55:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:58 Set A/D data flow result=40 09:55:58 Set A/D channel type result=40 09:55:58 Set A/D encoding result=40 09:55:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:58 Set channel filter=0.000000e+000 result=40 09:55:58 Config A/D Result=40 09:55:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:58 Get A/D filter: -9.255963e+061 result=40 09:55:58 Get A/D value=-858993460 result=40 09:55:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:58 Parameters OK 09:55:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:58 Set A/D data flow result=40 09:55:58 Set A/D channel type result=40 09:55:58 Set A/D encoding result=40 09:55:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:58 Set channel filter=0.000000e+000 result=40 09:55:58 Config A/D Result=40 09:55:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:58 Get A/D filter: -9.255963e+061 result=40 09:55:58 Get A/D value=-858993460 result=40 09:55:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:58 Aux= 09:55:58 Message to Camera, serial 102141 queued 09:56:35 Received message from Master: op=PointingHead serial=102154 09:56:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:56:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:56:35 Point started: ret=0 09:56:35 point_skyscan result=0 09:56:36 Check angles 09:56:36 SkyScan query 09:56:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:56:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:56:36 Message to Master queued w/err=0: serial=102154 error=0 09:56:41 Received message from Master: op=Filter serial=102155 09:56:41 Color wheel filter change from 0 to 0 09:56:41 FLIGetFilterPos err=0 currentPosition=0 09:56:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:56:41 Filter is already there-color wheel unchanged 09:56:42 Received message from Master: op=Shutter serial=102156 09:56:42 Shutter LASER close 09:56:42 Received message from Camera: op=State serial=102158 09:56:42 GetSingleValue result=40 Value=cccccccc 09:56:42 SkyScan query 09:56:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:56:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:42 Parameters OK 09:56:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:42 Set A/D data flow result=40 09:56:42 Set A/D channel type result=40 09:56:42 Set A/D encoding result=40 09:56:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:42 Set channel filter=0.000000e+000 result=40 09:56:42 Config A/D Result=40 09:56:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:42 Get A/D filter: -9.255963e+061 result=40 09:56:42 Get A/D value=-858993460 result=40 09:56:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:42 Parameters OK 09:56:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:42 Set A/D data flow result=40 09:56:42 Set A/D channel type result=40 09:56:42 Set A/D encoding result=40 09:56:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:42 Set channel filter=0.000000e+000 result=40 09:56:42 Config A/D Result=40 09:56:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:42 Get A/D filter: -9.255963e+061 result=40 09:56:42 Get A/D value=-858993460 result=40 09:56:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:56:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:56:42 Aux= 09:56:42 Message to Camera, serial 102158 queued 09:57:19 Received message from Master: op=PointingHead serial=102171 09:57:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:57:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:57:19 Point started: ret=0 09:57:19 point_skyscan result=0 09:57:20 Check angles 09:57:20 SkyScan query 09:57:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:57:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:57:21 Message to Master queued w/err=0: serial=102171 error=0 09:57:26 Received message from Master: op=Filter serial=102172 09:57:26 Color wheel filter change from 0 to 0 09:57:26 FLIGetFilterPos err=0 currentPosition=0 09:57:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:57:26 Filter is already there-color wheel unchanged 09:57:26 Received message from Master: op=Shutter serial=102173 09:57:26 Shutter LASER close 09:57:26 Received message from Camera: op=State serial=102175 09:57:26 GetSingleValue result=40 Value=cccccccc 09:57:26 SkyScan query 09:57:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:57:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:27 Parameters OK 09:57:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:27 Set A/D data flow result=40 09:57:27 Set A/D channel type result=40 09:57:27 Set A/D encoding result=40 09:57:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:27 Set channel filter=0.000000e+000 result=40 09:57:27 Config A/D Result=40 09:57:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:27 Get A/D filter: -9.255963e+061 result=40 09:57:27 Get A/D value=-858993460 result=40 09:57:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:27 Parameters OK 09:57:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:27 Set A/D data flow result=40 09:57:27 Set A/D channel type result=40 09:57:27 Set A/D encoding result=40 09:57:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:27 Set channel filter=0.000000e+000 result=40 09:57:27 Config A/D Result=40 09:57:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:27 Get A/D filter: -9.255963e+061 result=40 09:57:27 Get A/D value=-858993460 result=40 09:57:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:57:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:57:27 Aux= 09:57:27 Message to Camera, serial 102175 queued 09:58:03 Received message from Master: op=PointingHead serial=102188 09:58:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:58:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:58:04 Point started: ret=0 09:58:04 point_skyscan result=0 09:58:05 Check angles 09:58:05 SkyScan query 09:58:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.445<-13563 Statuses=0008 0009 09:58:05 Msec=0 True Az=112.995 Ze=-23.445 Az status=0008 Ze status=0009 09:58:05 Check angles 09:58:05 SkyScan query 09:58:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.805<-14987 Statuses=0008 0009 09:58:06 Msec=750 True Az=112.995 Ze=-44.805 Az status=0008 Ze status=0009 09:58:06 Check angles 09:58:06 SkyScan query 09:58:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.225<-16415 Statuses=0008 0009 09:58:07 Msec=1500 True Az=112.995 Ze=-66.225 Az status=0008 Ze status=0009 09:58:07 Check angles 09:58:07 SkyScan query 09:58:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.165<-17811 Statuses=0008 0009 09:58:07 Msec=2250 True Az=112.995 Ze=-87.165 Az status=0008 Ze status=0009 09:58:08 Check angles 09:58:08 SkyScan query 09:58:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.135<-19209 Statuses=0008 0009 09:58:08 Msec=3000 True Az=112.995 Ze=-108.135 Az status=0008 Ze status=0009 09:58:08 Check angles 09:58:08 SkyScan query 09:58:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.075<-20605 Statuses=0008 0009 09:58:09 Msec=3750 True Az=112.995 Ze=-129.075 Az status=0008 Ze status=0009 09:58:09 Check angles 09:58:09 SkyScan query 09:58:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.03<-22002 Statuses=0008 0009 09:58:10 Msec=4500 True Az=112.995 Ze=-150.03 Az status=0008 Ze status=0009 09:58:10 Check angles 09:58:10 SkyScan query 09:58:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0008 0009 09:58:10 Msec=5250 True Az=112.995 Ze=-170.895 Az status=0008 Ze status=0009 09:58:11 Check angles 09:58:11 SkyScan query 09:58:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:58:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:58:11 Message to Master queued w/err=0: serial=102188 error=0 09:58:16 Received message from Master: op=Filter serial=102189 09:58:16 Color wheel filter change from 0 to 0 09:58:16 FLIGetFilterPos err=0 currentPosition=0 09:58:16 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:16 Filter is already there-color wheel unchanged 09:58:16 Received message from Master: op=Shutter serial=102190 09:58:16 Shutter LASER open 09:58:16 Received message from Camera: op=State serial=102192 09:58:16 GetSingleValue result=40 Value=cccccccc 09:58:16 SkyScan query 09:58:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:58:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:17 Parameters OK 09:58:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:17 Set A/D data flow result=40 09:58:17 Set A/D channel type result=40 09:58:17 Set A/D encoding result=40 09:58:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:17 Set channel filter=0.000000e+000 result=40 09:58:17 Config A/D Result=40 09:58:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:17 Get A/D filter: -9.255963e+061 result=40 09:58:17 Get A/D value=-858993460 result=40 09:58:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:17 Parameters OK 09:58:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:17 Set A/D data flow result=40 09:58:17 Set A/D channel type result=40 09:58:17 Set A/D encoding result=40 09:58:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:17 Set channel filter=0.000000e+000 result=40 09:58:17 Config A/D Result=40 09:58:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:17 Get A/D filter: -9.255963e+061 result=40 09:58:17 Get A/D value=-858993460 result=40 09:58:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:17 Aux= 09:58:17 Message to Camera, serial 102192 queued 09:58:25 Received message from Master: op=Shutter serial=102202 09:58:25 Shutter LASER close 09:58:26 Received message from Master: op=PointingHead serial=102206 09:58:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:58:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:58:26 Point started: ret=0 09:58:26 point_skyscan result=0 09:58:27 Check angles 09:58:27 SkyScan query 09:58:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 09:58:28 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 09:58:28 Check angles 09:58:28 SkyScan query 09:58:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.905<-20127 Statuses=0008 0009 09:58:29 Msec=750 True Az=112.995 Ze=-121.905 Az status=0008 Ze status=0009 09:58:29 Check angles 09:58:29 SkyScan query 09:58:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.01<-18734 Statuses=0008 0009 09:58:29 Msec=1500 True Az=112.995 Ze=-101.01 Az status=0008 Ze status=0009 09:58:29 Check angles 09:58:29 SkyScan query 09:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.04<-17336 Statuses=0008 0009 09:58:30 Msec=2250 True Az=112.995 Ze=-80.04 Az status=0008 Ze status=0009 09:58:30 Check angles 09:58:30 SkyScan query 09:58:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.1<-15940 Statuses=0008 0009 09:58:31 Msec=3000 True Az=112.995 Ze=-59.1 Az status=0008 Ze status=0009 09:58:31 Check angles 09:58:31 SkyScan query 09:58:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.085<-14539 Statuses=0008 0009 09:58:32 Msec=3750 True Az=112.995 Ze=-38.085 Az status=0008 Ze status=0009 09:58:32 Check angles 09:58:32 SkyScan query 09:58:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.16<-13144 Statuses=0008 0009 09:58:32 Msec=4500 True Az=112.995 Ze=-17.16 Az status=0008 Ze status=0009 09:58:32 Check angles 09:58:32 SkyScan query 09:58:33 SkyScan query done: ret=0 az=112.995<-7533 ze=3.825<-11745 Statuses=0008 0009 09:58:33 Msec=5250 True Az=112.995 Ze=3.825 Az status=0008 Ze status=0009 09:58:33 Check angles 09:58:33 SkyScan query 09:58:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:58:34 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:58:34 Message to Master queued w/err=0: serial=102206 error=0 09:58:39 Received message from Master: op=Filter serial=102207 09:58:39 Color wheel filter change from 0 to 0 09:58:39 FLIGetFilterPos err=0 currentPosition=0 09:58:39 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:39 Filter is already there-color wheel unchanged 09:58:39 Received message from Master: op=Shutter serial=102208 09:58:39 Shutter LASER close 09:58:39 Received message from Camera: op=State serial=102210 09:58:39 GetSingleValue result=40 Value=cccccccc 09:58:39 SkyScan query 09:58:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:58:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:40 Parameters OK 09:58:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:40 Set A/D data flow result=40 09:58:40 Set A/D channel type result=40 09:58:40 Set A/D encoding result=40 09:58:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:40 Set channel filter=0.000000e+000 result=40 09:58:40 Config A/D Result=40 09:58:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:40 Get A/D filter: -9.255963e+061 result=40 09:58:40 Get A/D value=-858993460 result=40 09:58:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:40 Parameters OK 09:58:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:40 Set A/D data flow result=40 09:58:40 Set A/D channel type result=40 09:58:40 Set A/D encoding result=40 09:58:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:40 Set channel filter=0.000000e+000 result=40 09:58:40 Config A/D Result=40 09:58:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:40 Get A/D filter: -9.255963e+061 result=40 09:58:40 Get A/D value=-858993460 result=40 09:58:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:40 Aux= 09:58:40 Message to Camera, serial 102210 queued 09:59:17 Received message from Master: op=PointingHead serial=102223 09:59:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:59:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:59:17 Point started: ret=0 09:59:17 point_skyscan result=0 09:59:18 Check angles 09:59:18 SkyScan query 09:59:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:59:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:59:18 Message to Master queued w/err=0: serial=102223 error=0 09:59:23 Received message from Master: op=Filter serial=102224 09:59:23 Color wheel filter change from 0 to 0 09:59:23 FLIGetFilterPos err=0 currentPosition=0 09:59:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:59:23 Filter is already there-color wheel unchanged 09:59:23 Received message from Master: op=Shutter serial=102225 09:59:23 Shutter LASER close 09:59:23 Received message from Camera: op=State serial=102227 09:59:23 GetSingleValue result=40 Value=cccccccc 09:59:23 SkyScan query 09:59:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:59:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:24 Parameters OK 09:59:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:24 Set A/D data flow result=40 09:59:24 Set A/D channel type result=40 09:59:24 Set A/D encoding result=40 09:59:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:24 Set channel filter=0.000000e+000 result=40 09:59:24 Config A/D Result=40 09:59:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:24 Get A/D filter: -9.255963e+061 result=40 09:59:24 Get A/D value=-858993460 result=40 09:59:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:24 Parameters OK 09:59:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:24 Set A/D data flow result=40 09:59:24 Set A/D channel type result=40 09:59:24 Set A/D encoding result=40 09:59:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:24 Set channel filter=0.000000e+000 result=40 09:59:24 Config A/D Result=40 09:59:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:24 Get A/D filter: -9.255963e+061 result=40 09:59:24 Get A/D value=-858993460 result=40 09:59:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:59:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:59:24 Aux= 09:59:24 Message to Camera, serial 102227 queued 10:00:01 Received message from Master: op=PointingHead serial=102240 10:00:01 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:00:01 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:00:01 Point started: ret=0 10:00:01 point_skyscan result=0 10:00:02 Check angles 10:00:02 SkyScan query 10:00:03 SkyScan query done: ret=0 az=135.945<-9063 ze=-6.51<-12434 Statuses=0009 0008 10:00:03 Msec=0 True Az=135.945 Ze=-6.51 Az status=0009 Ze status=0008 10:00:03 Check angles 10:00:03 SkyScan query 10:00:03 SkyScan query done: ret=0 az=153.51<-10234 ze=-6.51<-12434 Statuses=0009 0008 10:00:03 Msec=750 True Az=153.51 Ze=-6.51 Az status=0009 Ze status=0008 10:00:03 Check angles 10:00:03 SkyScan query 10:00:04 SkyScan query done: ret=0 az=170.91<-11394 ze=-6.51<-12434 Statuses=0009 0008 10:00:04 Msec=1500 True Az=170.91 Ze=-6.51 Az status=0009 Ze status=0008 10:00:04 Check angles 10:00:04 SkyScan query 10:00:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:00:05 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:00:05 Message to Master queued w/err=0: serial=102240 error=0 10:00:10 Received message from Master: op=Filter serial=102241 10:00:10 Color wheel filter change from 0 to 0 10:00:10 FLIGetFilterPos err=0 currentPosition=0 10:00:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:00:10 Filter is already there-color wheel unchanged 10:00:10 Received message from Master: op=Shutter serial=102242 10:00:10 Shutter LASER close 10:00:10 Received message from Camera: op=State serial=102244 10:00:10 GetSingleValue result=40 Value=cccccccc 10:00:10 SkyScan query 10:00:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:00:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:11 Parameters OK 10:00:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:11 Set A/D data flow result=40 10:00:11 Set A/D channel type result=40 10:00:11 Set A/D encoding result=40 10:00:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:11 Set channel filter=0.000000e+000 result=40 10:00:11 Config A/D Result=40 10:00:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:11 Get A/D filter: -9.255963e+061 result=40 10:00:11 Get A/D value=-858993460 result=40 10:00:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:11 Parameters OK 10:00:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:11 Set A/D data flow result=40 10:00:11 Set A/D channel type result=40 10:00:11 Set A/D encoding result=40 10:00:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:11 Set channel filter=0.000000e+000 result=40 10:00:11 Config A/D Result=40 10:00:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:11 Get A/D filter: -9.255963e+061 result=40 10:00:11 Get A/D value=-858993460 result=40 10:00:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:00:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:00:11 Aux= 10:00:11 Message to Camera, serial 102244 queued 10:00:47 Received message from Master: op=PointingHead serial=102257 10:00:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:00:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:00:48 Point started: ret=0 10:00:48 point_skyscan result=0 10:00:49 Check angles 10:00:49 SkyScan query 10:00:49 SkyScan query done: ret=0 az=153.075<-10205 ze=6.51<-11566 Statuses=0009 0008 10:00:49 Msec=0 True Az=153.075 Ze=6.51 Az status=0009 Ze status=0008 10:00:49 Check angles 10:00:49 SkyScan query 10:00:50 SkyScan query done: ret=0 az=135.6<-9040 ze=6.495<-11567 Statuses=0009 0008 10:00:50 Msec=750 True Az=135.6 Ze=6.495 Az status=0009 Ze status=0008 10:00:50 Check angles 10:00:50 SkyScan query 10:00:51 SkyScan query done: ret=0 az=118.125<-7875 ze=6.495<-11567 Statuses=0009 0008 10:00:51 Msec=1500 True Az=118.125 Ze=6.495 Az status=0009 Ze status=0008 10:00:51 Check angles 10:00:51 SkyScan query 10:00:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:00:51 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:00:51 Message to Master queued w/err=0: serial=102257 error=0 10:00:56 Received message from Master: op=Filter serial=102258 10:00:56 Color wheel filter change from 0 to 0 10:00:56 FLIGetFilterPos err=0 currentPosition=0 10:00:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:00:56 Filter is already there-color wheel unchanged 10:00:57 Received message from Master: op=Shutter serial=102259 10:00:57 Shutter LASER close 10:00:57 Received message from Camera: op=State serial=102261 10:00:57 GetSingleValue result=40 Value=cccccccc 10:00:57 SkyScan query 10:00:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:00:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:57 Parameters OK 10:00:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:57 Set A/D data flow result=40 10:00:57 Set A/D channel type result=40 10:00:57 Set A/D encoding result=40 10:00:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:57 Set channel filter=0.000000e+000 result=40 10:00:57 Config A/D Result=40 10:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:57 Get A/D filter: -9.255963e+061 result=40 10:00:57 Get A/D value=-858993460 result=40 10:00:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:57 Parameters OK 10:00:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:57 Set A/D data flow result=40 10:00:57 Set A/D channel type result=40 10:00:57 Set A/D encoding result=40 10:00:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:57 Set channel filter=0.000000e+000 result=40 10:00:57 Config A/D Result=40 10:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:57 Get A/D filter: -9.255963e+061 result=40 10:00:57 Get A/D value=-858993460 result=40 10:00:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:00:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:00:57 Aux= 10:00:57 Message to Camera, serial 102261 queued 10:01:34 Received message from Master: op=PointingHead serial=102274 10:01:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:01:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:01:34 Point started: ret=0 10:01:34 point_skyscan result=0 10:01:35 Check angles 10:01:35 SkyScan query 10:01:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.64<-13576 Statuses=0008 0009 10:01:36 Msec=0 True Az=112.995 Ze=-23.64 Az status=0008 Ze status=0009 10:01:36 Check angles 10:01:36 SkyScan query 10:01:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.985<-14999 Statuses=0008 0009 10:01:36 Msec=750 True Az=112.995 Ze=-44.985 Az status=0008 Ze status=0009 10:01:37 Check angles 10:01:37 SkyScan query 10:01:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.985<-16399 Statuses=0008 0009 10:01:37 Msec=1500 True Az=112.995 Ze=-65.985 Az status=0008 Ze status=0009 10:01:37 Check angles 10:01:37 SkyScan query 10:01:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.925<-17795 Statuses=0008 0009 10:01:38 Msec=2250 True Az=112.995 Ze=-86.925 Az status=0008 Ze status=0009 10:01:38 Check angles 10:01:38 SkyScan query 10:01:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.925<-19195 Statuses=0008 0009 10:01:39 Msec=3000 True Az=112.995 Ze=-107.925 Az status=0008 Ze status=0009 10:01:39 Check angles 10:01:39 SkyScan query 10:01:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.835<-20589 Statuses=0008 0009 10:01:39 Msec=3750 True Az=112.995 Ze=-128.835 Az status=0008 Ze status=0009 10:01:40 Check angles 10:01:40 SkyScan query 10:01:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 10:01:40 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 10:01:40 Check angles 10:01:40 SkyScan query 10:01:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.73<-23382 Statuses=0008 0009 10:01:41 Msec=5250 True Az=112.995 Ze=-170.73 Az status=0008 Ze status=0009 10:01:41 Check angles 10:01:41 SkyScan query 10:01:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:01:42 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:01:42 Message to Master queued w/err=0: serial=102274 error=0 10:01:47 Received message from Master: op=Filter serial=102275 10:01:47 Color wheel filter change from 0 to 0 10:01:47 FLIGetFilterPos err=0 currentPosition=0 10:01:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:01:47 Filter is already there-color wheel unchanged 10:01:47 Received message from Master: op=Shutter serial=102276 10:01:47 Shutter LASER open 10:01:47 Received message from Camera: op=State serial=102278 10:01:47 GetSingleValue result=40 Value=cccccccc 10:01:47 SkyScan query 10:01:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:01:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:48 Parameters OK 10:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:48 Set A/D data flow result=40 10:01:48 Set A/D channel type result=40 10:01:48 Set A/D encoding result=40 10:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:48 Set channel filter=0.000000e+000 result=40 10:01:48 Config A/D Result=40 10:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:48 Get A/D filter: -9.255963e+061 result=40 10:01:48 Get A/D value=-858993460 result=40 10:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:48 Parameters OK 10:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:48 Set A/D data flow result=40 10:01:48 Set A/D channel type result=40 10:01:48 Set A/D encoding result=40 10:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:48 Set channel filter=0.000000e+000 result=40 10:01:48 Config A/D Result=40 10:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:48 Get A/D filter: -9.255963e+061 result=40 10:01:48 Get A/D value=-858993460 result=40 10:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:01:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:01:48 Aux= 10:01:48 Message to Camera, serial 102278 queued 10:01:56 Received message from Master: op=Shutter serial=102288 10:01:56 Shutter LASER close 10:01:56 Received message from Master: op=PointingHead serial=102292 10:01:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:01:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:01:57 Point started: ret=0 10:01:57 point_skyscan result=0 10:01:58 Check angles 10:01:58 SkyScan query 10:01:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 10:01:58 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 10:01:58 Check angles 10:01:58 SkyScan query 10:01:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.595<-20173 Statuses=0008 0009 10:01:59 Msec=750 True Az=112.995 Ze=-122.595 Az status=0008 Ze status=0009 10:01:59 Check angles 10:01:59 SkyScan query 10:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.61<-18774 Statuses=0008 0009 10:02:00 Msec=1500 True Az=112.995 Ze=-101.61 Az status=0008 Ze status=0009 10:02:00 Check angles 10:02:00 SkyScan query 10:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.64<-17376 Statuses=0008 0009 10:02:00 Msec=2250 True Az=112.995 Ze=-80.64 Az status=0008 Ze status=0009 10:02:01 Check angles 10:02:01 SkyScan query 10:02:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.715<-15981 Statuses=0008 0009 10:02:01 Msec=3000 True Az=112.995 Ze=-59.715 Az status=0008 Ze status=0009 10:02:01 Check angles 10:02:01 SkyScan query 10:02:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.265<-14551 Statuses=0008 0009 10:02:02 Msec=3750 True Az=112.995 Ze=-38.265 Az status=0008 Ze status=0009 10:02:02 Check angles 10:02:02 SkyScan query 10:02:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.325<-13155 Statuses=0008 0009 10:02:03 Msec=4500 True Az=112.995 Ze=-17.325 Az status=0008 Ze status=0009 10:02:03 Check angles 10:02:03 SkyScan query 10:02:03 SkyScan query done: ret=0 az=112.995<-7533 ze=3.675<-11755 Statuses=0008 0009 10:02:03 Msec=5250 True Az=112.995 Ze=3.675 Az status=0008 Ze status=0009 10:02:04 Check angles 10:02:04 SkyScan query 10:02:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:02:04 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:02:04 Message to Master queued w/err=0: serial=102292 error=0 10:02:09 Received message from Master: op=Filter serial=102293 10:02:09 Color wheel filter change from 0 to 0 10:02:09 FLIGetFilterPos err=0 currentPosition=0 10:02:09 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:09 Filter is already there-color wheel unchanged 10:02:09 Received message from Master: op=Shutter serial=102294 10:02:09 Shutter LASER close 10:02:09 Received message from Camera: op=State serial=102296 10:02:09 GetSingleValue result=40 Value=cccccccc 10:02:09 SkyScan query 10:02:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:02:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:10 Parameters OK 10:02:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:10 Set A/D data flow result=40 10:02:10 Set A/D channel type result=40 10:02:10 Set A/D encoding result=40 10:02:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:10 Set channel filter=0.000000e+000 result=40 10:02:10 Config A/D Result=40 10:02:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:10 Get A/D filter: -9.255963e+061 result=40 10:02:10 Get A/D value=-858993460 result=40 10:02:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:10 Parameters OK 10:02:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:10 Set A/D data flow result=40 10:02:10 Set A/D channel type result=40 10:02:10 Set A/D encoding result=40 10:02:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:10 Set channel filter=0.000000e+000 result=40 10:02:10 Config A/D Result=40 10:02:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:10 Get A/D filter: -9.255963e+061 result=40 10:02:10 Get A/D value=-858993460 result=40 10:02:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:10 Aux= 10:02:10 Message to Camera, serial 102296 queued 10:02:47 Received message from Master: op=PointingHead serial=102309 10:02:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:02:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:02:47 Point started: ret=0 10:02:47 point_skyscan result=0 10:02:48 Check angles 10:02:48 SkyScan query 10:02:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:02:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:02:49 Message to Master queued w/err=0: serial=102309 error=0 10:02:54 Received message from Master: op=Filter serial=102310 10:02:54 Color wheel filter change from 0 to 0 10:02:54 FLIGetFilterPos err=0 currentPosition=0 10:02:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:54 Filter is already there-color wheel unchanged 10:02:54 Received message from Master: op=Shutter serial=102311 10:02:54 Shutter LASER close 10:02:54 Received message from Camera: op=State serial=102313 10:02:54 GetSingleValue result=40 Value=cccccccc 10:02:54 SkyScan query 10:02:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:02:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:54 Parameters OK 10:02:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:54 Set A/D data flow result=40 10:02:54 Set A/D channel type result=40 10:02:54 Set A/D encoding result=40 10:02:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:54 Set channel filter=0.000000e+000 result=40 10:02:54 Config A/D Result=40 10:02:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:54 Get A/D filter: -9.255963e+061 result=40 10:02:54 Get A/D value=-858993460 result=40 10:02:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:54 Parameters OK 10:02:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:54 Set A/D data flow result=40 10:02:54 Set A/D channel type result=40 10:02:54 Set A/D encoding result=40 10:02:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:54 Set channel filter=0.000000e+000 result=40 10:02:54 Config A/D Result=40 10:02:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:54 Get A/D filter: -9.255963e+061 result=40 10:02:54 Get A/D value=-858993460 result=40 10:02:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:54 Aux= 10:02:54 Message to Camera, serial 102313 queued 10:03:30 Received message from Master: op=PointingHead serial=102325 10:03:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:03:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:03:31 Point started: ret=0 10:03:31 point_skyscan result=0 10:03:31 Check angles 10:03:31 SkyScan query 10:03:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:03:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:03:32 Message to Master queued w/err=0: serial=102325 error=0 10:03:37 Received message from Master: op=Filter serial=102326 10:03:37 Color wheel filter change from 0 to 0 10:03:37 FLIGetFilterPos err=0 currentPosition=0 10:03:37 FLIGetStepsRemaining err=0 RemainingSteps=0 10:03:37 Filter is already there-color wheel unchanged 10:03:37 Received message from Master: op=Shutter serial=102327 10:03:37 Shutter LASER close 10:03:37 Received message from Camera: op=State serial=102329 10:03:37 GetSingleValue result=40 Value=cccccccc 10:03:37 SkyScan query 10:03:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:03:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:38 Parameters OK 10:03:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:38 Set A/D data flow result=40 10:03:38 Set A/D channel type result=40 10:03:38 Set A/D encoding result=40 10:03:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:38 Set channel filter=0.000000e+000 result=40 10:03:38 Config A/D Result=40 10:03:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:38 Get A/D filter: -9.255963e+061 result=40 10:03:38 Get A/D value=-858993460 result=40 10:03:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:38 Parameters OK 10:03:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:38 Set A/D data flow result=40 10:03:38 Set A/D channel type result=40 10:03:38 Set A/D encoding result=40 10:03:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:38 Set channel filter=0.000000e+000 result=40 10:03:38 Config A/D Result=40 10:03:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:38 Get A/D filter: -9.255963e+061 result=40 10:03:38 Get A/D value=-858993460 result=40 10:03:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:03:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:03:38 Aux= 10:03:38 Message to Camera, serial 102329 queued 10:03:38 Received message from Master: op=Identify serial=102330 [UTC 2019-3-4 10:03:50] 10:04:15 Received message from Master: op=PointingHead serial=102345 10:04:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:04:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:04:15 Point started: ret=0 10:04:15 point_skyscan result=0 10:04:16 Check angles 10:04:16 SkyScan query 10:04:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:04:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:04:16 Message to Master queued w/err=0: serial=102345 error=0 10:04:21 Received message from Master: op=Filter serial=102346 10:04:21 Color wheel filter change from 0 to 0 10:04:21 FLIGetFilterPos err=0 currentPosition=0 10:04:21 FLIGetStepsRemaining err=0 RemainingSteps=0 10:04:21 Filter is already there-color wheel unchanged 10:04:21 Received message from Master: op=Shutter serial=102347 10:04:21 Shutter LASER close 10:04:21 Received message from Camera: op=State serial=102349 10:04:21 GetSingleValue result=40 Value=cccccccc 10:04:21 SkyScan query 10:04:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:04:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:22 Parameters OK 10:04:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:22 Set A/D data flow result=40 10:04:22 Set A/D channel type result=40 10:04:22 Set A/D encoding result=40 10:04:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:22 Set channel filter=0.000000e+000 result=40 10:04:22 Config A/D Result=40 10:04:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:22 Get A/D filter: -9.255963e+061 result=40 10:04:22 Get A/D value=-858993460 result=40 10:04:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:22 Parameters OK 10:04:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:22 Set A/D data flow result=40 10:04:22 Set A/D channel type result=40 10:04:22 Set A/D encoding result=40 10:04:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:22 Set channel filter=0.000000e+000 result=40 10:04:22 Config A/D Result=40 10:04:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:22 Get A/D filter: -9.255963e+061 result=40 10:04:22 Get A/D value=-858993460 result=40 10:04:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:04:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:04:22 Aux= 10:04:22 Message to Camera, serial 102349 queued 10:04:59 Received message from Master: op=PointingHead serial=102362 10:04:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:04:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:04:59 Point started: ret=0 10:04:59 point_skyscan result=0 10:05:00 Check angles 10:05:00 SkyScan query 10:05:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.865<-13591 Statuses=0008 0009 10:05:01 Msec=0 True Az=112.995 Ze=-23.865 Az status=0008 Ze status=0009 10:05:01 Check angles 10:05:01 SkyScan query 10:05:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 10:05:01 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 10:05:01 Check angles 10:05:01 SkyScan query 10:05:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.76<-16384 Statuses=0008 0009 10:05:02 Msec=1500 True Az=112.995 Ze=-65.76 Az status=0008 Ze status=0009 10:05:02 Check angles 10:05:02 SkyScan query 10:05:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.7<-17780 Statuses=0008 0009 10:05:03 Msec=2250 True Az=112.995 Ze=-86.7 Az status=0008 Ze status=0009 10:05:03 Check angles 10:05:03 SkyScan query 10:05:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.685<-19179 Statuses=0008 0009 10:05:04 Msec=3000 True Az=112.995 Ze=-107.685 Az status=0008 Ze status=0009 10:05:04 Check angles 10:05:04 SkyScan query 10:05:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.625<-20575 Statuses=0008 0009 10:05:04 Msec=3750 True Az=112.995 Ze=-128.625 Az status=0008 Ze status=0009 10:05:04 Check angles 10:05:04 SkyScan query 10:05:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.61<-21974 Statuses=0008 0009 10:05:05 Msec=4500 True Az=112.995 Ze=-149.61 Az status=0008 Ze status=0009 10:05:05 Check angles 10:05:05 SkyScan query 10:05:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.535<-23369 Statuses=0008 0009 10:05:06 Msec=5250 True Az=112.995 Ze=-170.535 Az status=0008 Ze status=0009 10:05:06 Check angles 10:05:06 SkyScan query 10:05:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:05:07 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:05:07 Message to Master queued w/err=0: serial=102362 error=0 10:05:12 Received message from Master: op=Filter serial=102363 10:05:12 Color wheel filter change from 0 to 0 10:05:12 FLIGetFilterPos err=0 currentPosition=0 10:05:12 FLIGetStepsRemaining err=0 RemainingSteps=0 10:05:12 Filter is already there-color wheel unchanged 10:05:12 Received message from Master: op=Shutter serial=102364 10:05:12 Shutter LASER open 10:05:12 Received message from Camera: op=State serial=102366 10:05:12 GetSingleValue result=40 Value=cccccccc 10:05:12 SkyScan query 10:05:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:05:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:12 Parameters OK 10:05:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:12 Set A/D data flow result=40 10:05:12 Set A/D channel type result=40 10:05:12 Set A/D encoding result=40 10:05:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:12 Set channel filter=0.000000e+000 result=40 10:05:12 Config A/D Result=40 10:05:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:12 Get A/D filter: -9.255963e+061 result=40 10:05:12 Get A/D value=-858993460 result=40 10:05:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:12 Parameters OK 10:05:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:12 Set A/D data flow result=40 10:05:12 Set A/D channel type result=40 10:05:12 Set A/D encoding result=40 10:05:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:12 Set channel filter=0.000000e+000 result=40 10:05:12 Config A/D Result=40 10:05:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:12 Get A/D filter: -9.255963e+061 result=40 10:05:12 Get A/D value=-858993460 result=40 10:05:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:05:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:05:12 Aux= 10:05:12 Message to Camera, serial 102366 queued 10:05:21 Received message from Master: op=Shutter serial=102376 10:05:21 Shutter LASER close 10:05:21 Received message from Master: op=PointingHead serial=102380 10:05:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:05:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:05:22 Point started: ret=0 10:05:22 point_skyscan result=0 10:05:23 Check angles 10:05:23 SkyScan query 10:05:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.52<-21568 Statuses=0008 0009 10:05:23 Msec=0 True Az=112.995 Ze=-143.52 Az status=0008 Ze status=0009 10:05:23 Check angles 10:05:23 SkyScan query 10:05:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.595<-20173 Statuses=0008 0009 10:05:24 Msec=750 True Az=112.995 Ze=-122.595 Az status=0008 Ze status=0009 10:05:24 Check angles 10:05:24 SkyScan query 10:05:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.625<-18775 Statuses=0008 0009 10:05:25 Msec=1500 True Az=112.995 Ze=-101.625 Az status=0008 Ze status=0009 10:05:25 Check angles 10:05:25 SkyScan query 10:05:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.655<-17377 Statuses=0008 0009 10:05:25 Msec=2250 True Az=112.995 Ze=-80.655 Az status=0008 Ze status=0009 10:05:26 Check angles 10:05:26 SkyScan query 10:05:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.715<-15981 Statuses=0008 0009 10:05:26 Msec=3000 True Az=112.995 Ze=-59.715 Az status=0008 Ze status=0009 10:05:26 Check angles 10:05:26 SkyScan query 10:05:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.745<-14583 Statuses=0008 0009 10:05:27 Msec=3750 True Az=112.995 Ze=-38.745 Az status=0008 Ze status=0009 10:05:27 Check angles 10:05:27 SkyScan query 10:05:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.775<-13185 Statuses=0008 0009 10:05:28 Msec=4500 True Az=112.995 Ze=-17.775 Az status=0008 Ze status=0009 10:05:28 Check angles 10:05:28 SkyScan query 10:05:28 SkyScan query done: ret=0 az=112.995<-7533 ze=3.18<-11788 Statuses=0008 0009 10:05:28 Msec=5250 True Az=112.995 Ze=3.18 Az status=0008 Ze status=0009 10:05:29 Check angles 10:05:29 SkyScan query 10:05:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:05:29 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:05:29 Message to Master queued w/err=0: serial=102380 error=0 10:05:34 Received message from Master: op=Filter serial=102381 10:05:34 Color wheel filter change from 0 to 0 10:05:34 FLIGetFilterPos err=0 currentPosition=0 10:05:34 FLIGetStepsRemaining err=0 RemainingSteps=0 10:05:34 Filter is already there-color wheel unchanged 10:05:34 Received message from Master: op=Shutter serial=102382 10:05:34 Shutter LASER close 10:05:34 Received message from Camera: op=State serial=102384 10:05:34 GetSingleValue result=40 Value=cccccccc 10:05:34 SkyScan query 10:05:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:05:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:35 Parameters OK 10:05:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:35 Set A/D data flow result=40 10:05:35 Set A/D channel type result=40 10:05:35 Set A/D encoding result=40 10:05:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:35 Set channel filter=0.000000e+000 result=40 10:05:35 Config A/D Result=40 10:05:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:35 Get A/D filter: -9.255963e+061 result=40 10:05:35 Get A/D value=-858993460 result=40 10:05:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:35 Parameters OK 10:05:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:35 Set A/D data flow result=40 10:05:35 Set A/D channel type result=40 10:05:35 Set A/D encoding result=40 10:05:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:35 Set channel filter=0.000000e+000 result=40 10:05:35 Config A/D Result=40 10:05:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:35 Get A/D filter: -9.255963e+061 result=40 10:05:35 Get A/D value=-858993460 result=40 10:05:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:05:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:05:35 Aux= 10:05:35 Message to Camera, serial 102384 queued 10:06:12 Received message from Master: op=PointingHead serial=102397 10:06:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:06:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:06:12 Point started: ret=0 10:06:12 point_skyscan result=0 10:06:13 Check angles 10:06:13 SkyScan query 10:06:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:06:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:06:14 Message to Master queued w/err=0: serial=102397 error=0 10:06:19 Received message from Master: op=Filter serial=102398 10:06:19 Color wheel filter change from 0 to 0 10:06:19 FLIGetFilterPos err=0 currentPosition=0 10:06:19 FLIGetStepsRemaining err=0 RemainingSteps=0 10:06:19 Filter is already there-color wheel unchanged 10:06:19 Received message from Master: op=Shutter serial=102399 10:06:19 Shutter LASER close 10:06:19 Received message from Camera: op=State serial=102401 10:06:19 GetSingleValue result=40 Value=cccccccc 10:06:19 SkyScan query 10:06:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:06:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:19 Parameters OK 10:06:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:19 Set A/D data flow result=40 10:06:19 Set A/D channel type result=40 10:06:19 Set A/D encoding result=40 10:06:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:19 Set channel filter=0.000000e+000 result=40 10:06:19 Config A/D Result=40 10:06:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:19 Get A/D filter: -9.255963e+061 result=40 10:06:19 Get A/D value=-858993460 result=40 10:06:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:19 Parameters OK 10:06:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:19 Set A/D data flow result=40 10:06:19 Set A/D channel type result=40 10:06:19 Set A/D encoding result=40 10:06:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:19 Set channel filter=0.000000e+000 result=40 10:06:19 Config A/D Result=40 10:06:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:19 Get A/D filter: -9.255963e+061 result=40 10:06:19 Get A/D value=-858993460 result=40 10:06:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:06:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:06:19 Aux= 10:06:19 Message to Camera, serial 102401 queued 10:06:56 Received message from Master: op=PointingHead serial=102414 10:06:56 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:06:56 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:06:57 Point started: ret=0 10:06:57 point_skyscan result=0 10:06:57 Check angles 10:06:57 SkyScan query 10:06:58 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 10:06:58 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 10:06:58 Check angles 10:06:58 SkyScan query 10:06:59 SkyScan query done: ret=0 az=154.14<-10276 ze=-6.495<-12433 Statuses=0009 0008 10:06:59 Msec=750 True Az=154.14 Ze=-6.495 Az status=0009 Ze status=0008 10:06:59 Check angles 10:06:59 SkyScan query 10:06:59 SkyScan query done: ret=0 az=171.525<-11435 ze=-6.495<-12433 Statuses=0009 0008 10:06:59 Msec=1500 True Az=171.525 Ze=-6.495 Az status=0009 Ze status=0008 10:07:00 Check angles 10:07:00 SkyScan query 10:07:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:07:00 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:07:00 Message to Master queued w/err=0: serial=102414 error=0 10:07:05 Received message from Master: op=Filter serial=102415 10:07:05 Color wheel filter change from 0 to 0 10:07:05 FLIGetFilterPos err=0 currentPosition=0 10:07:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:05 Filter is already there-color wheel unchanged 10:07:05 Received message from Master: op=Shutter serial=102416 10:07:05 Shutter LASER close 10:07:05 Received message from Camera: op=State serial=102418 10:07:05 GetSingleValue result=40 Value=cccccccc 10:07:05 SkyScan query 10:07:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:07:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:06 Parameters OK 10:07:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:06 Set A/D data flow result=40 10:07:06 Set A/D channel type result=40 10:07:06 Set A/D encoding result=40 10:07:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:06 Set channel filter=0.000000e+000 result=40 10:07:06 Config A/D Result=40 10:07:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:06 Get A/D filter: -9.255963e+061 result=40 10:07:06 Get A/D value=-858993460 result=40 10:07:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:06 Parameters OK 10:07:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:06 Set A/D data flow result=40 10:07:06 Set A/D channel type result=40 10:07:06 Set A/D encoding result=40 10:07:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:06 Set channel filter=0.000000e+000 result=40 10:07:06 Config A/D Result=40 10:07:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:06 Get A/D filter: -9.255963e+061 result=40 10:07:06 Get A/D value=-858993460 result=40 10:07:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:06 Aux= 10:07:06 Message to Camera, serial 102418 queued 10:07:43 Received message from Master: op=PointingHead serial=102431 10:07:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:07:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:07:43 Point started: ret=0 10:07:43 point_skyscan result=0 10:07:44 Check angles 10:07:44 SkyScan query 10:07:44 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 10:07:44 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 10:07:45 Check angles 10:07:45 SkyScan query 10:07:45 SkyScan query done: ret=0 az=135.495<-9033 ze=6.495<-11567 Statuses=0009 0008 10:07:45 Msec=750 True Az=135.495 Ze=6.495 Az status=0009 Ze status=0008 10:07:45 Check angles 10:07:45 SkyScan query 10:07:46 SkyScan query done: ret=0 az=118.02<-7868 ze=6.495<-11567 Statuses=0009 0008 10:07:46 Msec=1500 True Az=118.02 Ze=6.495 Az status=0009 Ze status=0008 10:07:46 Check angles 10:07:46 SkyScan query 10:07:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:07:47 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:07:47 Message to Master queued w/err=0: serial=102431 error=0 10:07:52 Received message from Master: op=Filter serial=102432 10:07:52 Color wheel filter change from 0 to 0 10:07:52 FLIGetFilterPos err=0 currentPosition=0 10:07:52 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:52 Filter is already there-color wheel unchanged 10:07:52 Received message from Master: op=Shutter serial=102433 10:07:52 Shutter LASER close 10:07:52 Received message from Camera: op=State serial=102435 10:07:52 GetSingleValue result=40 Value=cccccccc 10:07:52 SkyScan query 10:07:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:07:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:53 Parameters OK 10:07:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:53 Set A/D data flow result=40 10:07:53 Set A/D channel type result=40 10:07:53 Set A/D encoding result=40 10:07:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:53 Set channel filter=0.000000e+000 result=40 10:07:53 Config A/D Result=40 10:07:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:53 Get A/D filter: -9.255963e+061 result=40 10:07:53 Get A/D value=-858993460 result=40 10:07:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:53 Parameters OK 10:07:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:53 Set A/D data flow result=40 10:07:53 Set A/D channel type result=40 10:07:53 Set A/D encoding result=40 10:07:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:53 Set channel filter=0.000000e+000 result=40 10:07:53 Config A/D Result=40 10:07:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:53 Get A/D filter: -9.255963e+061 result=40 10:07:53 Get A/D value=-858993460 result=40 10:07:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:53 Aux= 10:07:53 Message to Camera, serial 102435 queued 10:08:29 Received message from Master: op=PointingHead serial=102448 10:08:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:08:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:08:30 Point started: ret=0 10:08:30 point_skyscan result=0 10:08:31 Check angles 10:08:31 SkyScan query 10:08:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 10:08:31 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 10:08:31 Check angles 10:08:31 SkyScan query 10:08:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 10:08:32 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 10:08:32 Check angles 10:08:32 SkyScan query 10:08:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.43<-16362 Statuses=0008 0009 10:08:33 Msec=1500 True Az=112.995 Ze=-65.43 Az status=0008 Ze status=0009 10:08:33 Check angles 10:08:33 SkyScan query 10:08:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.82<-17788 Statuses=0008 0009 10:08:33 Msec=2250 True Az=112.995 Ze=-86.82 Az status=0008 Ze status=0009 10:08:34 Check angles 10:08:34 SkyScan query 10:08:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.82<-19188 Statuses=0008 0009 10:08:34 Msec=3000 True Az=112.995 Ze=-107.82 Az status=0008 Ze status=0009 10:08:34 Check angles 10:08:34 SkyScan query 10:08:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.745<-20583 Statuses=0008 0009 10:08:35 Msec=3750 True Az=112.995 Ze=-128.745 Az status=0008 Ze status=0009 10:08:35 Check angles 10:08:35 SkyScan query 10:08:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.15<-22010 Statuses=0008 0009 10:08:36 Msec=4500 True Az=112.995 Ze=-150.15 Az status=0008 Ze status=0009 10:08:36 Check angles 10:08:36 SkyScan query 10:08:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.985<-23399 Statuses=0008 0009 10:08:36 Msec=5250 True Az=112.995 Ze=-170.985 Az status=0008 Ze status=0009 10:08:37 Check angles 10:08:37 SkyScan query 10:08:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:08:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:08:37 Message to Master queued w/err=0: serial=102448 error=0 10:08:42 Received message from Master: op=Filter serial=102449 10:08:42 Color wheel filter change from 0 to 0 10:08:42 FLIGetFilterPos err=0 currentPosition=0 10:08:42 FLIGetStepsRemaining err=0 RemainingSteps=0 10:08:42 Filter is already there-color wheel unchanged 10:08:42 Received message from Master: op=Shutter serial=102450 10:08:42 Shutter LASER open 10:08:42 Received message from Camera: op=State serial=102452 10:08:42 GetSingleValue result=40 Value=cccccccc 10:08:42 SkyScan query 10:08:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:08:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:43 Parameters OK 10:08:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:43 Set A/D data flow result=40 10:08:43 Set A/D channel type result=40 10:08:43 Set A/D encoding result=40 10:08:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:43 Set channel filter=0.000000e+000 result=40 10:08:43 Config A/D Result=40 10:08:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:43 Get A/D filter: -9.255963e+061 result=40 10:08:43 Get A/D value=-858993460 result=40 10:08:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:43 Parameters OK 10:08:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:43 Set A/D data flow result=40 10:08:43 Set A/D channel type result=40 10:08:43 Set A/D encoding result=40 10:08:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:43 Set channel filter=0.000000e+000 result=40 10:08:43 Config A/D Result=40 10:08:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:43 Get A/D filter: -9.255963e+061 result=40 10:08:43 Get A/D value=-858993460 result=40 10:08:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:08:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:08:43 Aux= 10:08:43 Message to Camera, serial 102452 queued 10:08:51 Received message from Master: op=Shutter serial=102462 10:08:51 Shutter LASER close 10:08:52 Received message from Master: op=PointingHead serial=102466 10:08:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:08:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:08:52 Point started: ret=0 10:08:52 point_skyscan result=0 10:08:53 Check angles 10:08:53 SkyScan query 10:08:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.92<-21528 Statuses=0008 0009 10:08:54 Msec=0 True Az=112.995 Ze=-142.92 Az status=0008 Ze status=0009 10:08:54 Check angles 10:08:54 SkyScan query 10:08:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.485<-20099 Statuses=0008 0009 10:08:54 Msec=750 True Az=112.995 Ze=-121.485 Az status=0008 Ze status=0009 10:08:55 Check angles 10:08:55 SkyScan query 10:08:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.53<-18702 Statuses=0008 0009 10:08:55 Msec=1500 True Az=112.995 Ze=-100.53 Az status=0008 Ze status=0009 10:08:55 Check angles 10:08:55 SkyScan query 10:08:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.14<-17276 Statuses=0008 0009 10:08:56 Msec=2250 True Az=112.995 Ze=-79.14 Az status=0008 Ze status=0009 10:08:56 Check angles 10:08:56 SkyScan query 10:08:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.78<-15852 Statuses=0008 0009 10:08:57 Msec=3000 True Az=112.995 Ze=-57.78 Az status=0008 Ze status=0009 10:08:57 Check angles 10:08:57 SkyScan query 10:08:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.375<-14425 Statuses=0008 0009 10:08:57 Msec=3750 True Az=112.995 Ze=-36.375 Az status=0008 Ze status=0009 10:08:58 Check angles 10:08:58 SkyScan query 10:08:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.405<-13027 Statuses=0008 0009 10:08:58 Msec=4500 True Az=112.995 Ze=-15.405 Az status=0008 Ze status=0009 10:08:58 Check angles 10:08:58 SkyScan query 10:08:59 SkyScan query done: ret=0 az=112.995<-7533 ze=5.46<-11636 Statuses=0008 0009 10:08:59 Msec=5250 True Az=112.995 Ze=5.46 Az status=0008 Ze status=0009 10:08:59 Check angles 10:08:59 SkyScan query 10:09:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:09:00 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:09:00 Message to Master queued w/err=0: serial=102466 error=0 10:09:05 Received message from Master: op=Filter serial=102467 10:09:05 Color wheel filter change from 0 to 0 10:09:05 FLIGetFilterPos err=0 currentPosition=0 10:09:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:09:05 Filter is already there-color wheel unchanged 10:09:05 Received message from Master: op=Shutter serial=102468 10:09:05 Shutter LASER close 10:09:05 Received message from Camera: op=State serial=102470 10:09:05 GetSingleValue result=40 Value=cccccccc 10:09:05 SkyScan query 10:09:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:09:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:06 Parameters OK 10:09:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:06 Set A/D data flow result=40 10:09:06 Set A/D channel type result=40 10:09:06 Set A/D encoding result=40 10:09:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:06 Set channel filter=0.000000e+000 result=40 10:09:06 Config A/D Result=40 10:09:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:06 Get A/D filter: -9.255963e+061 result=40 10:09:06 Get A/D value=-858993460 result=40 10:09:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:06 Parameters OK 10:09:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:06 Set A/D data flow result=40 10:09:06 Set A/D channel type result=40 10:09:06 Set A/D encoding result=40 10:09:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:06 Set channel filter=0.000000e+000 result=40 10:09:06 Config A/D Result=40 10:09:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:06 Get A/D filter: -9.255963e+061 result=40 10:09:06 Get A/D value=-858993460 result=40 10:09:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:06 Aux= 10:09:06 Message to Camera, serial 102470 queued 10:09:42 Received message from Master: op=PointingHead serial=102483 10:09:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:09:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:09:43 Point started: ret=0 10:09:43 point_skyscan result=0 10:09:44 Check angles 10:09:44 SkyScan query 10:09:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:09:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:09:44 Message to Master queued w/err=0: serial=102483 error=0 10:09:49 Received message from Master: op=Filter serial=102484 10:09:49 Color wheel filter change from 0 to 0 10:09:49 FLIGetFilterPos err=0 currentPosition=0 10:09:49 FLIGetStepsRemaining err=0 RemainingSteps=0 10:09:49 Filter is already there-color wheel unchanged 10:09:49 Received message from Master: op=Shutter serial=102485 10:09:49 Shutter LASER close 10:09:49 Received message from Camera: op=State serial=102487 10:09:49 GetSingleValue result=40 Value=cccccccc 10:09:49 SkyScan query 10:09:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:09:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:50 Parameters OK 10:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:50 Set A/D data flow result=40 10:09:50 Set A/D channel type result=40 10:09:50 Set A/D encoding result=40 10:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:50 Set channel filter=0.000000e+000 result=40 10:09:50 Config A/D Result=40 10:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:50 Get A/D filter: -9.255963e+061 result=40 10:09:50 Get A/D value=-858993460 result=40 10:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:50 Parameters OK 10:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:50 Set A/D data flow result=40 10:09:50 Set A/D channel type result=40 10:09:50 Set A/D encoding result=40 10:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:50 Set channel filter=0.000000e+000 result=40 10:09:50 Config A/D Result=40 10:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:50 Get A/D filter: -9.255963e+061 result=40 10:09:50 Get A/D value=-858993460 result=40 10:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:50 Aux= 10:09:50 Message to Camera, serial 102487 queued 10:10:27 Received message from Master: op=PointingHead serial=102500 10:10:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:10:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:10:27 Point started: ret=0 10:10:27 point_skyscan result=0 10:10:28 Check angles 10:10:28 SkyScan query 10:10:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:10:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:10:28 Message to Master queued w/err=0: serial=102500 error=0 10:10:33 Received message from Master: op=Filter serial=102501 10:10:33 Color wheel filter change from 0 to 0 10:10:33 FLIGetFilterPos err=0 currentPosition=0 10:10:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:10:33 Filter is already there-color wheel unchanged 10:10:34 Received message from Master: op=Shutter serial=102502 10:10:34 Shutter LASER close 10:10:34 Received message from Camera: op=State serial=102504 10:10:34 GetSingleValue result=40 Value=cccccccc 10:10:34 SkyScan query 10:10:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:10:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:34 Parameters OK 10:10:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:34 Set A/D data flow result=40 10:10:34 Set A/D channel type result=40 10:10:34 Set A/D encoding result=40 10:10:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:34 Set channel filter=0.000000e+000 result=40 10:10:34 Config A/D Result=40 10:10:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:34 Get A/D filter: -9.255963e+061 result=40 10:10:34 Get A/D value=-858993460 result=40 10:10:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:34 Parameters OK 10:10:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:34 Set A/D data flow result=40 10:10:34 Set A/D channel type result=40 10:10:34 Set A/D encoding result=40 10:10:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:34 Set channel filter=0.000000e+000 result=40 10:10:34 Config A/D Result=40 10:10:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:34 Get A/D filter: -9.255963e+061 result=40 10:10:34 Get A/D value=-858993460 result=40 10:10:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:10:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:10:34 Aux= 10:10:34 Message to Camera, serial 102504 queued 10:11:10 Received message from Master: op=PointingHead serial=102516 10:11:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:11:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:11:10 Point started: ret=0 10:11:10 point_skyscan result=0 10:11:11 Check angles 10:11:11 SkyScan query 10:11:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:11:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:11:12 Message to Master queued w/err=0: serial=102516 error=0 10:11:17 Received message from Master: op=Filter serial=102517 10:11:17 Color wheel filter change from 0 to 0 10:11:17 FLIGetFilterPos err=0 currentPosition=0 10:11:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:11:17 Filter is already there-color wheel unchanged 10:11:17 Received message from Master: op=Shutter serial=102518 10:11:17 Shutter LASER close 10:11:17 Received message from Camera: op=State serial=102520 10:11:17 GetSingleValue result=40 Value=cccccccc 10:11:17 SkyScan query 10:11:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:11:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:18 Parameters OK 10:11:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:18 Set A/D data flow result=40 10:11:18 Set A/D channel type result=40 10:11:18 Set A/D encoding result=40 10:11:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:18 Set channel filter=0.000000e+000 result=40 10:11:18 Config A/D Result=40 10:11:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:18 Get A/D filter: -9.255963e+061 result=40 10:11:18 Get A/D value=-858993460 result=40 10:11:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:18 Parameters OK 10:11:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:18 Set A/D data flow result=40 10:11:18 Set A/D channel type result=40 10:11:18 Set A/D encoding result=40 10:11:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:18 Set channel filter=0.000000e+000 result=40 10:11:18 Config A/D Result=40 10:11:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:18 Get A/D filter: -9.255963e+061 result=40 10:11:18 Get A/D value=-858993460 result=40 10:11:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:11:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:11:18 Aux= 10:11:18 Message to Camera, serial 102520 queued 10:11:54 Received message from Master: op=PointingHead serial=102533 10:11:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:11:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:11:55 Point started: ret=0 10:11:55 point_skyscan result=0 10:11:56 Check angles 10:11:56 SkyScan query 10:11:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 10:11:56 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 10:11:56 Check angles 10:11:56 SkyScan query 10:11:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.61<-14974 Statuses=0008 0009 10:11:57 Msec=750 True Az=112.995 Ze=-44.61 Az status=0008 Ze status=0009 10:11:57 Check angles 10:11:57 SkyScan query 10:11:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 10:11:58 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 10:11:58 Check angles 10:11:58 SkyScan query 10:11:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.505<-17767 Statuses=0008 0009 10:11:58 Msec=2250 True Az=112.995 Ze=-86.505 Az status=0008 Ze status=0009 10:11:59 Check angles 10:11:59 SkyScan query 10:11:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.91<-19194 Statuses=0008 0009 10:11:59 Msec=3000 True Az=112.995 Ze=-107.91 Az status=0008 Ze status=0009 10:11:59 Check angles 10:11:59 SkyScan query 10:12:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.85<-20590 Statuses=0008 0009 10:12:00 Msec=3750 True Az=112.995 Ze=-128.85 Az status=0008 Ze status=0009 10:12:00 Check angles 10:12:00 SkyScan query 10:12:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.27<-22018 Statuses=0008 0009 10:12:01 Msec=4500 True Az=112.995 Ze=-150.27 Az status=0008 Ze status=0009 10:12:01 Check angles 10:12:01 SkyScan query 10:12:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.06<-23404 Statuses=0008 0009 10:12:01 Msec=5250 True Az=112.995 Ze=-171.06 Az status=0008 Ze status=0009 10:12:02 Check angles 10:12:02 SkyScan query 10:12:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:12:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:12:02 Message to Master queued w/err=0: serial=102533 error=0 10:12:07 Received message from Master: op=Filter serial=102534 10:12:07 Color wheel filter change from 0 to 0 10:12:07 FLIGetFilterPos err=0 currentPosition=0 10:12:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:12:07 Filter is already there-color wheel unchanged 10:12:07 Received message from Master: op=Shutter serial=102535 10:12:07 Shutter LASER open 10:12:07 Received message from Camera: op=State serial=102537 10:12:07 GetSingleValue result=40 Value=cccccccc 10:12:07 SkyScan query 10:12:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:12:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:08 Parameters OK 10:12:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:08 Set A/D data flow result=40 10:12:08 Set A/D channel type result=40 10:12:08 Set A/D encoding result=40 10:12:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:08 Set channel filter=0.000000e+000 result=40 10:12:08 Config A/D Result=40 10:12:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:08 Get A/D filter: -9.255963e+061 result=40 10:12:08 Get A/D value=-858993460 result=40 10:12:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:08 Parameters OK 10:12:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:08 Set A/D data flow result=40 10:12:08 Set A/D channel type result=40 10:12:08 Set A/D encoding result=40 10:12:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:08 Set channel filter=0.000000e+000 result=40 10:12:08 Config A/D Result=40 10:12:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:08 Get A/D filter: -9.255963e+061 result=40 10:12:08 Get A/D value=-858993460 result=40 10:12:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:12:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:12:08 Aux= 10:12:08 Message to Camera, serial 102537 queued 10:12:16 Received message from Master: op=Shutter serial=102547 10:12:16 Shutter LASER close 10:12:17 Received message from Master: op=PointingHead serial=102551 10:12:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:12:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:12:17 Point started: ret=0 10:12:17 point_skyscan result=0 10:12:18 Check angles 10:12:18 SkyScan query 10:12:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 10:12:19 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 10:12:19 Check angles 10:12:19 SkyScan query 10:12:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 10:12:20 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 10:12:20 Check angles 10:12:20 SkyScan query 10:12:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 10:12:20 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 10:12:20 Check angles 10:12:20 SkyScan query 10:12:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 10:12:21 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 10:12:21 Check angles 10:12:21 SkyScan query 10:12:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 10:12:22 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 10:12:22 Check angles 10:12:22 SkyScan query 10:12:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.19<-14546 Statuses=0008 0009 10:12:23 Msec=3750 True Az=112.995 Ze=-38.19 Az status=0008 Ze status=0009 10:12:23 Check angles 10:12:23 SkyScan query 10:12:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 10:12:23 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 10:12:23 Check angles 10:12:23 SkyScan query 10:12:24 SkyScan query done: ret=0 az=112.995<-7533 ze=3.72<-11752 Statuses=0008 0009 10:12:24 Msec=5250 True Az=112.995 Ze=3.72 Az status=0008 Ze status=0009 10:12:24 Check angles 10:12:24 SkyScan query 10:12:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:12:25 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:12:25 Message to Master queued w/err=0: serial=102551 error=0 10:12:30 Received message from Master: op=Filter serial=102552 10:12:30 Color wheel filter change from 0 to 0 10:12:30 FLIGetFilterPos err=0 currentPosition=0 10:12:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:12:30 Filter is already there-color wheel unchanged 10:12:30 Received message from Master: op=Shutter serial=102553 10:12:30 Shutter LASER close 10:12:30 Received message from Camera: op=State serial=102555 10:12:30 GetSingleValue result=40 Value=cccccccc 10:12:30 SkyScan query 10:12:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:12:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:31 Parameters OK 10:12:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:31 Set A/D data flow result=40 10:12:31 Set A/D channel type result=40 10:12:31 Set A/D encoding result=40 10:12:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:31 Set channel filter=0.000000e+000 result=40 10:12:31 Config A/D Result=40 10:12:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:31 Get A/D filter: -9.255963e+061 result=40 10:12:31 Get A/D value=-858993460 result=40 10:12:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:31 Parameters OK 10:12:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:31 Set A/D data flow result=40 10:12:31 Set A/D channel type result=40 10:12:31 Set A/D encoding result=40 10:12:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:31 Set channel filter=0.000000e+000 result=40 10:12:31 Config A/D Result=40 10:12:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:31 Get A/D filter: -9.255963e+061 result=40 10:12:31 Get A/D value=-858993460 result=40 10:12:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:12:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:12:31 Aux= 10:12:31 Message to Camera, serial 102555 queued 10:13:08 Received message from Master: op=PointingHead serial=102568 10:13:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:13:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:13:08 Point started: ret=0 10:13:08 point_skyscan result=0 10:13:09 Check angles 10:13:09 SkyScan query 10:13:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:13:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:13:09 Message to Master queued w/err=0: serial=102568 error=0 10:13:14 Received message from Master: op=Filter serial=102569 10:13:14 Color wheel filter change from 0 to 0 10:13:14 FLIGetFilterPos err=0 currentPosition=0 10:13:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:14 Filter is already there-color wheel unchanged 10:13:14 Received message from Master: op=Shutter serial=102570 10:13:14 Shutter LASER close 10:13:14 Received message from Camera: op=State serial=102572 10:13:14 GetSingleValue result=40 Value=cccccccc 10:13:14 SkyScan query 10:13:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:13:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:15 Parameters OK 10:13:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:15 Set A/D data flow result=40 10:13:15 Set A/D channel type result=40 10:13:15 Set A/D encoding result=40 10:13:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:15 Set channel filter=0.000000e+000 result=40 10:13:15 Config A/D Result=40 10:13:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:15 Get A/D filter: -9.255963e+061 result=40 10:13:15 Get A/D value=-858993460 result=40 10:13:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:15 Parameters OK 10:13:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:15 Set A/D data flow result=40 10:13:15 Set A/D channel type result=40 10:13:15 Set A/D encoding result=40 10:13:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:15 Set channel filter=0.000000e+000 result=40 10:13:15 Config A/D Result=40 10:13:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:15 Get A/D filter: -9.255963e+061 result=40 10:13:15 Get A/D value=-858993460 result=40 10:13:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:15 Aux= 10:13:15 Message to Camera, serial 102572 queued 10:13:52 Received message from Master: op=PointingHead serial=102585 10:13:52 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:13:52 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:13:52 Point started: ret=0 10:13:52 point_skyscan result=0 10:13:53 Check angles 10:13:53 SkyScan query 10:13:54 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 10:13:54 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 10:13:54 Check angles 10:13:54 SkyScan query 10:13:54 SkyScan query done: ret=0 az=153.78<-10252 ze=-6.495<-12433 Statuses=0009 0008 10:13:54 Msec=750 True Az=153.78 Ze=-6.495 Az status=0009 Ze status=0008 10:13:54 Check angles 10:13:54 SkyScan query 10:13:55 SkyScan query done: ret=0 az=171.195<-11413 ze=-6.495<-12433 Statuses=0009 0008 10:13:55 Msec=1500 True Az=171.195 Ze=-6.495 Az status=0009 Ze status=0008 10:13:55 Check angles 10:13:55 SkyScan query 10:13:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:13:56 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:13:56 Message to Master queued w/err=0: serial=102585 error=0 10:14:01 Received message from Master: op=Filter serial=102586 10:14:01 Color wheel filter change from 0 to 0 10:14:01 FLIGetFilterPos err=0 currentPosition=0 10:14:01 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:01 Filter is already there-color wheel unchanged 10:14:01 Received message from Master: op=Shutter serial=102587 10:14:01 Shutter LASER close 10:14:01 Received message from Camera: op=State serial=102589 10:14:01 GetSingleValue result=40 Value=cccccccc 10:14:01 SkyScan query 10:14:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:14:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:02 Parameters OK 10:14:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:02 Set A/D data flow result=40 10:14:02 Set A/D channel type result=40 10:14:02 Set A/D encoding result=40 10:14:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:02 Set channel filter=0.000000e+000 result=40 10:14:02 Config A/D Result=40 10:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:02 Get A/D filter: -9.255963e+061 result=40 10:14:02 Get A/D value=-858993460 result=40 10:14:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:02 Parameters OK 10:14:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:02 Set A/D data flow result=40 10:14:02 Set A/D channel type result=40 10:14:02 Set A/D encoding result=40 10:14:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:02 Set channel filter=0.000000e+000 result=40 10:14:02 Config A/D Result=40 10:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:02 Get A/D filter: -9.255963e+061 result=40 10:14:02 Get A/D value=-858993460 result=40 10:14:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:14:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:14:02 Aux= 10:14:02 Message to Camera, serial 102589 queued [UTC 2019-3-4 10:14:38] 10:14:38 Received message from Master: op=PointingHead serial=102602 10:14:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:14:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:14:39 Point started: ret=0 10:14:39 point_skyscan result=0 10:14:40 Check angles 10:14:40 SkyScan query 10:14:40 SkyScan query done: ret=0 az=152.67<-10178 ze=6.51<-11566 Statuses=0009 0008 10:14:40 Msec=0 True Az=152.67 Ze=6.51 Az status=0009 Ze status=0008 10:14:40 Check angles 10:14:40 SkyScan query 10:14:41 SkyScan query done: ret=0 az=134.895<-8993 ze=6.495<-11567 Statuses=0009 0008 10:14:41 Msec=750 True Az=134.895 Ze=6.495 Az status=0009 Ze status=0008 10:14:41 Check angles 10:14:41 SkyScan query 10:14:42 SkyScan query done: ret=0 az=117.42<-7828 ze=6.495<-11567 Statuses=0009 0008 10:14:42 Msec=1500 True Az=117.42 Ze=6.495 Az status=0009 Ze status=0008 10:14:42 Check angles 10:14:42 SkyScan query 10:14:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:14:42 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:14:42 Message to Master queued w/err=0: serial=102602 error=0 10:14:47 Received message from Master: op=Filter serial=102603 10:14:47 Color wheel filter change from 0 to 0 10:14:47 FLIGetFilterPos err=0 currentPosition=0 10:14:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:47 Filter is already there-color wheel unchanged 10:14:48 Received message from Master: op=Shutter serial=102604 10:14:48 Shutter LASER close 10:14:48 Received message from Camera: op=State serial=102606 10:14:48 GetSingleValue result=40 Value=cccccccc 10:14:48 SkyScan query 10:14:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:14:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:48 Parameters OK 10:14:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:48 Set A/D data flow result=40 10:14:48 Set A/D channel type result=40 10:14:48 Set A/D encoding result=40 10:14:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:48 Set channel filter=0.000000e+000 result=40 10:14:48 Config A/D Result=40 10:14:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:48 Get A/D filter: -9.255963e+061 result=40 10:14:48 Get A/D value=-858993460 result=40 10:14:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:48 Parameters OK 10:14:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:48 Set A/D data flow result=40 10:14:48 Set A/D channel type result=40 10:14:48 Set A/D encoding result=40 10:14:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:48 Set channel filter=0.000000e+000 result=40 10:14:48 Config A/D Result=40 10:14:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:48 Get A/D filter: -9.255963e+061 result=40 10:14:48 Get A/D value=-858993460 result=40 10:14:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:14:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:14:48 Aux= 10:14:48 Message to Camera, serial 102606 queued 10:15:25 Received message from Master: op=PointingHead serial=102619 10:15:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:15:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:15:25 Point started: ret=0 10:15:25 point_skyscan result=0 10:15:26 Check angles 10:15:26 SkyScan query 10:15:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 10:15:27 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 10:15:27 Check angles 10:15:27 SkyScan query 10:15:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.61<-14974 Statuses=0008 0009 10:15:27 Msec=750 True Az=112.995 Ze=-44.61 Az status=0008 Ze status=0009 10:15:28 Check angles 10:15:28 SkyScan query 10:15:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.58<-16372 Statuses=0008 0009 10:15:28 Msec=1500 True Az=112.995 Ze=-65.58 Az status=0008 Ze status=0009 10:15:28 Check angles 10:15:28 SkyScan query 10:15:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.505<-17767 Statuses=0008 0009 10:15:29 Msec=2250 True Az=112.995 Ze=-86.505 Az status=0008 Ze status=0009 10:15:29 Check angles 10:15:29 SkyScan query 10:15:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.49<-19166 Statuses=0008 0009 10:15:30 Msec=3000 True Az=112.995 Ze=-107.49 Az status=0008 Ze status=0009 10:15:30 Check angles 10:15:30 SkyScan query 10:15:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.43<-20562 Statuses=0008 0009 10:15:30 Msec=3750 True Az=112.995 Ze=-128.43 Az status=0008 Ze status=0009 10:15:31 Check angles 10:15:31 SkyScan query 10:15:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.865<-21991 Statuses=0008 0009 10:15:31 Msec=4500 True Az=112.995 Ze=-149.865 Az status=0008 Ze status=0009 10:15:31 Check angles 10:15:31 SkyScan query 10:15:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.76<-23384 Statuses=0008 0009 10:15:32 Msec=5250 True Az=112.995 Ze=-170.76 Az status=0008 Ze status=0009 10:15:32 Check angles 10:15:32 SkyScan query 10:15:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:15:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:15:33 Message to Master queued w/err=0: serial=102619 error=0 10:15:38 Received message from Master: op=Filter serial=102620 10:15:38 Color wheel filter change from 0 to 0 10:15:38 FLIGetFilterPos err=0 currentPosition=0 10:15:38 FLIGetStepsRemaining err=0 RemainingSteps=0 10:15:38 Filter is already there-color wheel unchanged 10:15:38 Received message from Master: op=Shutter serial=102621 10:15:38 Shutter LASER open 10:15:38 Received message from Camera: op=State serial=102623 10:15:38 GetSingleValue result=40 Value=cccccccc 10:15:38 SkyScan query 10:15:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:15:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:39 Parameters OK 10:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:39 Set A/D data flow result=40 10:15:39 Set A/D channel type result=40 10:15:39 Set A/D encoding result=40 10:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:39 Set channel filter=0.000000e+000 result=40 10:15:39 Config A/D Result=40 10:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:39 Get A/D filter: -9.255963e+061 result=40 10:15:39 Get A/D value=-858993460 result=40 10:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:39 Parameters OK 10:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:39 Set A/D data flow result=40 10:15:39 Set A/D channel type result=40 10:15:39 Set A/D encoding result=40 10:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:39 Set channel filter=0.000000e+000 result=40 10:15:39 Config A/D Result=40 10:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:39 Get A/D filter: -9.255963e+061 result=40 10:15:39 Get A/D value=-858993460 result=40 10:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:15:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:15:39 Aux= 10:15:39 Message to Camera, serial 102623 queued 10:15:47 Received message from Master: op=Shutter serial=102633 10:15:47 Shutter LASER close 10:15:48 Received message from Master: op=PointingHead serial=102637 10:15:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:15:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:15:48 Point started: ret=0 10:15:48 point_skyscan result=0 10:15:49 Check angles 10:15:49 SkyScan query 10:15:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.8<-21520 Statuses=0008 0009 10:15:49 Msec=0 True Az=112.995 Ze=-142.8 Az status=0008 Ze status=0009 10:15:49 Check angles 10:15:49 SkyScan query 10:15:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.365<-20091 Statuses=0008 0009 10:15:50 Msec=750 True Az=112.995 Ze=-121.365 Az status=0008 Ze status=0009 10:15:50 Check angles 10:15:50 SkyScan query 10:15:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.41<-18694 Statuses=0008 0009 10:15:51 Msec=1500 True Az=112.995 Ze=-100.41 Az status=0008 Ze status=0009 10:15:51 Check angles 10:15:51 SkyScan query 10:15:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.425<-17295 Statuses=0008 0009 10:15:51 Msec=2250 True Az=112.995 Ze=-79.425 Az status=0008 Ze status=0009 10:15:52 Check angles 10:15:52 SkyScan query 10:15:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.5<-15900 Statuses=0008 0009 10:15:52 Msec=3000 True Az=112.995 Ze=-58.5 Az status=0008 Ze status=0009 10:15:52 Check angles 10:15:52 SkyScan query 10:15:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.56<-14504 Statuses=0008 0009 10:15:53 Msec=3750 True Az=112.995 Ze=-37.56 Az status=0008 Ze status=0009 10:15:53 Check angles 10:15:53 SkyScan query 10:15:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.59<-13106 Statuses=0008 0009 10:15:54 Msec=4500 True Az=112.995 Ze=-16.59 Az status=0008 Ze status=0009 10:15:54 Check angles 10:15:54 SkyScan query 10:15:54 SkyScan query done: ret=0 az=113.01<-7534 ze=4.29<-11714 Statuses=0008 0009 10:15:54 Msec=5250 True Az=113.01 Ze=4.29 Az status=0008 Ze status=0009 10:15:55 Check angles 10:15:55 SkyScan query 10:15:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:15:55 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:15:55 Message to Master queued w/err=0: serial=102637 error=0 10:16:00 Received message from Master: op=Filter serial=102638 10:16:00 Color wheel filter change from 0 to 0 10:16:00 FLIGetFilterPos err=0 currentPosition=0 10:16:00 FLIGetStepsRemaining err=0 RemainingSteps=0 10:16:00 Filter is already there-color wheel unchanged 10:16:00 Received message from Master: op=Shutter serial=102639 10:16:00 Shutter LASER close 10:16:01 Received message from Camera: op=State serial=102641 10:16:01 GetSingleValue result=40 Value=cccccccc 10:16:01 SkyScan query 10:16:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:16:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:01 Parameters OK 10:16:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:01 Set A/D data flow result=40 10:16:01 Set A/D channel type result=40 10:16:01 Set A/D encoding result=40 10:16:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:01 Set channel filter=0.000000e+000 result=40 10:16:01 Config A/D Result=40 10:16:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:01 Get A/D filter: -9.255963e+061 result=40 10:16:01 Get A/D value=-858993460 result=40 10:16:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:01 Parameters OK 10:16:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:01 Set A/D data flow result=40 10:16:01 Set A/D channel type result=40 10:16:01 Set A/D encoding result=40 10:16:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:01 Set channel filter=0.000000e+000 result=40 10:16:01 Config A/D Result=40 10:16:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:01 Get A/D filter: -9.255963e+061 result=40 10:16:01 Get A/D value=-858993460 result=40 10:16:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:16:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:16:01 Aux= 10:16:01 Message to Camera, serial 102641 queued 10:16:38 Received message from Master: op=PointingHead serial=102654 10:16:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:16:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:16:38 Point started: ret=0 10:16:38 point_skyscan result=0 10:16:39 Check angles 10:16:39 SkyScan query 10:16:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:16:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:16:40 Message to Master queued w/err=0: serial=102654 error=0 10:16:45 Received message from Master: op=Filter serial=102655 10:16:45 Color wheel filter change from 0 to 0 10:16:45 FLIGetFilterPos err=0 currentPosition=0 10:16:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:16:45 Filter is already there-color wheel unchanged 10:16:45 Received message from Master: op=Shutter serial=102656 10:16:45 Shutter LASER close 10:16:45 Received message from Camera: op=State serial=102658 10:16:45 GetSingleValue result=40 Value=cccccccc 10:16:45 SkyScan query 10:16:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:16:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:45 Parameters OK 10:16:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:45 Set A/D data flow result=40 10:16:45 Set A/D channel type result=40 10:16:45 Set A/D encoding result=40 10:16:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:45 Set channel filter=0.000000e+000 result=40 10:16:45 Config A/D Result=40 10:16:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:45 Get A/D filter: -9.255963e+061 result=40 10:16:45 Get A/D value=-858993460 result=40 10:16:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:45 Parameters OK 10:16:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:45 Set A/D data flow result=40 10:16:45 Set A/D channel type result=40 10:16:45 Set A/D encoding result=40 10:16:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:45 Set channel filter=0.000000e+000 result=40 10:16:45 Config A/D Result=40 10:16:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:45 Get A/D filter: -9.255963e+061 result=40 10:16:45 Get A/D value=-858993460 result=40 10:16:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:16:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:16:45 Aux= 10:16:45 Message to Camera, serial 102658 queued 10:17:22 Received message from Master: op=PointingHead serial=102671 10:17:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:17:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:17:23 Point started: ret=0 10:17:23 point_skyscan result=0 10:17:23 Check angles 10:17:23 SkyScan query 10:17:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:17:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:17:24 Message to Master queued w/err=0: serial=102671 error=0 10:17:29 Received message from Master: op=Filter serial=102672 10:17:29 Color wheel filter change from 0 to 0 10:17:29 FLIGetFilterPos err=0 currentPosition=0 10:17:29 FLIGetStepsRemaining err=0 RemainingSteps=0 10:17:29 Filter is already there-color wheel unchanged 10:17:29 Received message from Master: op=Shutter serial=102673 10:17:29 Shutter LASER close 10:17:29 Received message from Camera: op=State serial=102675 10:17:29 GetSingleValue result=40 Value=cccccccc 10:17:29 SkyScan query 10:17:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:17:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:30 Parameters OK 10:17:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:30 Set A/D data flow result=40 10:17:30 Set A/D channel type result=40 10:17:30 Set A/D encoding result=40 10:17:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:30 Set channel filter=0.000000e+000 result=40 10:17:30 Config A/D Result=40 10:17:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:30 Get A/D filter: -9.255963e+061 result=40 10:17:30 Get A/D value=-858993460 result=40 10:17:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:30 Parameters OK 10:17:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:30 Set A/D data flow result=40 10:17:30 Set A/D channel type result=40 10:17:30 Set A/D encoding result=40 10:17:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:30 Set channel filter=0.000000e+000 result=40 10:17:30 Config A/D Result=40 10:17:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:30 Get A/D filter: -9.255963e+061 result=40 10:17:30 Get A/D value=-858993460 result=40 10:17:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:17:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:17:30 Aux= 10:17:30 Message to Camera, serial 102675 queued 10:18:07 Received message from Master: op=PointingHead serial=102688 10:18:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:18:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:18:07 Point started: ret=0 10:18:07 point_skyscan result=0 10:18:08 Check angles 10:18:08 SkyScan query 10:18:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:18:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:18:08 Message to Master queued w/err=0: serial=102688 error=0 10:18:13 Received message from Master: op=Filter serial=102689 10:18:13 Color wheel filter change from 0 to 0 10:18:13 FLIGetFilterPos err=0 currentPosition=0 10:18:13 FLIGetStepsRemaining err=0 RemainingSteps=0 10:18:13 Filter is already there-color wheel unchanged 10:18:14 Received message from Master: op=Shutter serial=102690 10:18:14 Shutter LASER close 10:18:14 Received message from Camera: op=State serial=102692 10:18:14 GetSingleValue result=40 Value=cccccccc 10:18:14 SkyScan query 10:18:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:18:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:14 Parameters OK 10:18:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:14 Set A/D data flow result=40 10:18:14 Set A/D channel type result=40 10:18:14 Set A/D encoding result=40 10:18:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:14 Set channel filter=0.000000e+000 result=40 10:18:14 Config A/D Result=40 10:18:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:14 Get A/D filter: -9.255963e+061 result=40 10:18:14 Get A/D value=-858993460 result=40 10:18:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:14 Parameters OK 10:18:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:14 Set A/D data flow result=40 10:18:14 Set A/D channel type result=40 10:18:14 Set A/D encoding result=40 10:18:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:14 Set channel filter=0.000000e+000 result=40 10:18:14 Config A/D Result=40 10:18:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:14 Get A/D filter: -9.255963e+061 result=40 10:18:14 Get A/D value=-858993460 result=40 10:18:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:18:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:18:14 Aux= 10:18:14 Message to Camera, serial 102692 queued 10:18:51 Received message from Master: op=PointingHead serial=102705 10:18:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:18:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:18:51 Point started: ret=0 10:18:51 point_skyscan result=0 10:18:52 Check angles 10:18:52 SkyScan query 10:18:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 10:18:53 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 10:18:53 Check angles 10:18:53 SkyScan query 10:18:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.295<-14953 Statuses=0008 0009 10:18:53 Msec=750 True Az=112.995 Ze=-44.295 Az status=0008 Ze status=0009 10:18:54 Check angles 10:18:54 SkyScan query 10:18:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 10:18:54 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 10:18:54 Check angles 10:18:54 SkyScan query 10:18:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.595<-17773 Statuses=0008 0009 10:18:55 Msec=2250 True Az=112.995 Ze=-86.595 Az status=0008 Ze status=0009 10:18:55 Check angles 10:18:55 SkyScan query 10:18:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.55<-19170 Statuses=0008 0009 10:18:56 Msec=3000 True Az=112.995 Ze=-107.55 Az status=0008 Ze status=0009 10:18:56 Check angles 10:18:56 SkyScan query 10:18:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.505<-20567 Statuses=0008 0009 10:18:56 Msec=3750 True Az=112.995 Ze=-128.505 Az status=0008 Ze status=0009 10:18:57 Check angles 10:18:57 SkyScan query 10:18:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.49<-21966 Statuses=0008 0009 10:18:57 Msec=4500 True Az=112.995 Ze=-149.49 Az status=0008 Ze status=0009 10:18:57 Check angles 10:18:57 SkyScan query 10:18:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.82<-23388 Statuses=0008 0009 10:18:58 Msec=5250 True Az=112.995 Ze=-170.82 Az status=0008 Ze status=0009 10:18:58 Check angles 10:18:58 SkyScan query 10:18:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:18:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:18:59 Message to Master queued w/err=0: serial=102705 error=0 10:19:04 Received message from Master: op=Filter serial=102706 10:19:04 Color wheel filter change from 0 to 0 10:19:04 FLIGetFilterPos err=0 currentPosition=0 10:19:04 FLIGetStepsRemaining err=0 RemainingSteps=0 10:19:04 Filter is already there-color wheel unchanged 10:19:04 Received message from Master: op=Shutter serial=102707 10:19:04 Shutter LASER open 10:19:04 Received message from Camera: op=State serial=102709 10:19:04 GetSingleValue result=40 Value=cccccccc 10:19:04 SkyScan query 10:19:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:19:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:05 Parameters OK 10:19:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:05 Set A/D data flow result=40 10:19:05 Set A/D channel type result=40 10:19:05 Set A/D encoding result=40 10:19:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:05 Set channel filter=0.000000e+000 result=40 10:19:05 Config A/D Result=40 10:19:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:05 Get A/D filter: -9.255963e+061 result=40 10:19:05 Get A/D value=-858993460 result=40 10:19:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:05 Parameters OK 10:19:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:05 Set A/D data flow result=40 10:19:05 Set A/D channel type result=40 10:19:05 Set A/D encoding result=40 10:19:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:05 Set channel filter=0.000000e+000 result=40 10:19:05 Config A/D Result=40 10:19:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:05 Get A/D filter: -9.255963e+061 result=40 10:19:05 Get A/D value=-858993460 result=40 10:19:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:19:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:19:05 Aux= 10:19:05 Message to Camera, serial 102709 queued 10:19:13 Received message from Master: op=Shutter serial=102719 10:19:13 Shutter LASER close 10:19:14 Received message from Master: op=PointingHead serial=102723 10:19:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:19:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:19:14 Point started: ret=0 10:19:14 point_skyscan result=0 10:19:15 Check angles 10:19:15 SkyScan query 10:19:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 10:19:15 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 10:19:15 Check angles 10:19:15 SkyScan query 10:19:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 10:19:16 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 10:19:16 Check angles 10:19:16 SkyScan query 10:19:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 10:19:17 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 10:19:17 Check angles 10:19:17 SkyScan query 10:19:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.95<-17330 Statuses=0008 0009 10:19:18 Msec=2250 True Az=112.995 Ze=-79.95 Az status=0008 Ze status=0009 10:19:18 Check angles 10:19:18 SkyScan query 10:19:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.025<-15935 Statuses=0008 0009 10:19:18 Msec=3000 True Az=112.995 Ze=-59.025 Az status=0008 Ze status=0009 10:19:18 Check angles 10:19:18 SkyScan query 10:19:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 10:19:19 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 10:19:19 Check angles 10:19:19 SkyScan query 10:19:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.055<-13137 Statuses=0008 0009 10:19:20 Msec=4500 True Az=112.995 Ze=-17.055 Az status=0008 Ze status=0009 10:19:20 Check angles 10:19:20 SkyScan query 10:19:21 SkyScan query done: ret=0 az=112.995<-7533 ze=3.9<-11740 Statuses=0008 0009 10:19:21 Msec=5250 True Az=112.995 Ze=3.9 Az status=0008 Ze status=0009 10:19:21 Check angles 10:19:21 SkyScan query 10:19:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:19:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:19:21 Message to Master queued w/err=0: serial=102723 error=0 10:19:26 Received message from Master: op=Filter serial=102724 10:19:26 Color wheel filter change from 0 to 0 10:19:26 FLIGetFilterPos err=0 currentPosition=0 10:19:26 FLIGetStepsRemaining err=0 RemainingSteps=0 10:19:26 Filter is already there-color wheel unchanged 10:19:26 Received message from Master: op=Shutter serial=102725 10:19:26 Shutter LASER close 10:19:27 Received message from Camera: op=State serial=102727 10:19:27 GetSingleValue result=40 Value=cccccccc 10:19:27 SkyScan query 10:19:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:19:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:27 Parameters OK 10:19:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:27 Set A/D data flow result=40 10:19:27 Set A/D channel type result=40 10:19:27 Set A/D encoding result=40 10:19:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:27 Set channel filter=0.000000e+000 result=40 10:19:27 Config A/D Result=40 10:19:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:27 Get A/D filter: -9.255963e+061 result=40 10:19:27 Get A/D value=-858993460 result=40 10:19:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:27 Parameters OK 10:19:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:27 Set A/D data flow result=40 10:19:27 Set A/D channel type result=40 10:19:27 Set A/D encoding result=40 10:19:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:27 Set channel filter=0.000000e+000 result=40 10:19:27 Config A/D Result=40 10:19:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:27 Get A/D filter: -9.255963e+061 result=40 10:19:27 Get A/D value=-858993460 result=40 10:19:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:19:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:19:27 Aux= 10:19:27 Message to Camera, serial 102727 queued 10:20:04 Received message from Master: op=PointingHead serial=102740 10:20:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:20:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:20:04 Point started: ret=0 10:20:04 point_skyscan result=0 10:20:05 Check angles 10:20:05 SkyScan query 10:20:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:20:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:20:06 Message to Master queued w/err=0: serial=102740 error=0 10:20:11 Received message from Master: op=Filter serial=102741 10:20:11 Color wheel filter change from 0 to 0 10:20:11 FLIGetFilterPos err=0 currentPosition=0 10:20:11 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:11 Filter is already there-color wheel unchanged 10:20:11 Received message from Master: op=Shutter serial=102742 10:20:11 Shutter LASER close 10:20:11 Received message from Camera: op=State serial=102744 10:20:11 GetSingleValue result=40 Value=cccccccc 10:20:11 SkyScan query 10:20:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:20:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:12 Parameters OK 10:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:12 Set A/D data flow result=40 10:20:12 Set A/D channel type result=40 10:20:12 Set A/D encoding result=40 10:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:12 Set channel filter=0.000000e+000 result=40 10:20:12 Config A/D Result=40 10:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:12 Get A/D filter: -9.255963e+061 result=40 10:20:12 Get A/D value=-858993460 result=40 10:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:12 Parameters OK 10:20:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:12 Set A/D data flow result=40 10:20:12 Set A/D channel type result=40 10:20:12 Set A/D encoding result=40 10:20:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:12 Set channel filter=0.000000e+000 result=40 10:20:12 Config A/D Result=40 10:20:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:12 Get A/D filter: -9.255963e+061 result=40 10:20:12 Get A/D value=-858993460 result=40 10:20:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:12 Aux= 10:20:12 Message to Camera, serial 102744 queued 10:20:48 Received message from Master: op=PointingHead serial=102757 10:20:48 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:20:48 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:20:49 Point started: ret=0 10:20:49 point_skyscan result=0 10:20:49 Check angles 10:20:49 SkyScan query 10:20:50 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 10:20:50 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 10:20:50 Check angles 10:20:50 SkyScan query 10:20:51 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.51<-12434 Statuses=0009 0008 10:20:51 Msec=750 True Az=153.525 Ze=-6.51 Az status=0009 Ze status=0008 10:20:51 Check angles 10:20:51 SkyScan query 10:20:52 SkyScan query done: ret=0 az=171<-11400 ze=-6.495<-12433 Statuses=0009 0008 10:20:52 Msec=1500 True Az=171 Ze=-6.495 Az status=0009 Ze status=0008 10:20:52 Check angles 10:20:52 SkyScan query 10:20:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:20:52 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:20:52 Message to Master queued w/err=0: serial=102757 error=0 10:20:57 Received message from Master: op=Filter serial=102758 10:20:57 Color wheel filter change from 0 to 0 10:20:57 FLIGetFilterPos err=0 currentPosition=0 10:20:57 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:57 Filter is already there-color wheel unchanged 10:20:57 Received message from Master: op=Shutter serial=102759 10:20:57 Shutter LASER close 10:20:58 Received message from Camera: op=State serial=102761 10:20:58 GetSingleValue result=40 Value=cccccccc 10:20:58 SkyScan query 10:20:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:20:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:58 Parameters OK 10:20:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:58 Set A/D data flow result=40 10:20:58 Set A/D channel type result=40 10:20:58 Set A/D encoding result=40 10:20:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:58 Set channel filter=0.000000e+000 result=40 10:20:58 Config A/D Result=40 10:20:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:58 Get A/D filter: -9.255963e+061 result=40 10:20:58 Get A/D value=-858993460 result=40 10:20:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:58 Parameters OK 10:20:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:58 Set A/D data flow result=40 10:20:58 Set A/D channel type result=40 10:20:58 Set A/D encoding result=40 10:20:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:58 Set channel filter=0.000000e+000 result=40 10:20:58 Config A/D Result=40 10:20:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:58 Get A/D filter: -9.255963e+061 result=40 10:20:58 Get A/D value=-858993460 result=40 10:20:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:58 Aux= 10:20:58 Message to Camera, serial 102761 queued 10:21:35 Received message from Master: op=PointingHead serial=102774 10:21:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:21:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:21:35 Point started: ret=0 10:21:35 point_skyscan result=0 10:21:36 Check angles 10:21:36 SkyScan query 10:21:37 SkyScan query done: ret=0 az=152.67<-10178 ze=6.51<-11566 Statuses=0009 0008 10:21:37 Msec=0 True Az=152.67 Ze=6.51 Az status=0009 Ze status=0008 10:21:37 Check angles 10:21:37 SkyScan query 10:21:37 SkyScan query done: ret=0 az=135.135<-9009 ze=6.495<-11567 Statuses=0009 0008 10:21:37 Msec=750 True Az=135.135 Ze=6.495 Az status=0009 Ze status=0008 10:21:38 Check angles 10:21:38 SkyScan query 10:21:38 SkyScan query done: ret=0 az=117.375<-7825 ze=6.495<-11567 Statuses=0009 0008 10:21:38 Msec=1500 True Az=117.375 Ze=6.495 Az status=0009 Ze status=0008 10:21:38 Check angles 10:21:38 SkyScan query 10:21:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:21:39 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:21:39 Message to Master queued w/err=0: serial=102774 error=0 10:21:44 Received message from Master: op=Filter serial=102775 10:21:44 Color wheel filter change from 0 to 0 10:21:44 FLIGetFilterPos err=0 currentPosition=0 10:21:44 FLIGetStepsRemaining err=0 RemainingSteps=0 10:21:44 Filter is already there-color wheel unchanged 10:21:44 Received message from Master: op=Shutter serial=102776 10:21:44 Shutter LASER close 10:21:44 Received message from Camera: op=State serial=102778 10:21:44 GetSingleValue result=40 Value=cccccccc 10:21:44 SkyScan query 10:21:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:21:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:45 Parameters OK 10:21:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:45 Set A/D data flow result=40 10:21:45 Set A/D channel type result=40 10:21:45 Set A/D encoding result=40 10:21:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:45 Set channel filter=0.000000e+000 result=40 10:21:45 Config A/D Result=40 10:21:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:45 Get A/D filter: -9.255963e+061 result=40 10:21:45 Get A/D value=-858993460 result=40 10:21:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:45 Parameters OK 10:21:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:45 Set A/D data flow result=40 10:21:45 Set A/D channel type result=40 10:21:45 Set A/D encoding result=40 10:21:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:45 Set channel filter=0.000000e+000 result=40 10:21:45 Config A/D Result=40 10:21:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:45 Get A/D filter: -9.255963e+061 result=40 10:21:45 Get A/D value=-858993460 result=40 10:21:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:21:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:21:45 Aux= 10:21:45 Message to Camera, serial 102778 queued 10:22:22 Received message from Master: op=PointingHead serial=102791 10:22:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:22:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:22:22 Point started: ret=0 10:22:22 point_skyscan result=0 10:22:23 Check angles 10:22:23 SkyScan query 10:22:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 10:22:23 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 10:22:23 Check angles 10:22:23 SkyScan query 10:22:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.1<-14940 Statuses=0008 0009 10:22:24 Msec=750 True Az=112.995 Ze=-44.1 Az status=0008 Ze status=0009 10:22:24 Check angles 10:22:24 SkyScan query 10:22:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.43<-16362 Statuses=0008 0009 10:22:25 Msec=1500 True Az=112.995 Ze=-65.43 Az status=0008 Ze status=0009 10:22:25 Check angles 10:22:25 SkyScan query 10:22:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.805<-17787 Statuses=0008 0009 10:22:26 Msec=2250 True Az=112.995 Ze=-86.805 Az status=0008 Ze status=0009 10:22:26 Check angles 10:22:26 SkyScan query 10:22:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 10:22:26 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 10:22:26 Check angles 10:22:26 SkyScan query 10:22:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.715<-20581 Statuses=0008 0009 10:22:27 Msec=3750 True Az=112.995 Ze=-128.715 Az status=0008 Ze status=0009 10:22:27 Check angles 10:22:27 SkyScan query 10:22:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 10:22:28 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 10:22:28 Check angles 10:22:28 SkyScan query 10:22:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.625<-23375 Statuses=0008 0009 10:22:29 Msec=5250 True Az=112.995 Ze=-170.625 Az status=0008 Ze status=0009 10:22:29 Check angles 10:22:29 SkyScan query 10:22:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:22:29 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:22:29 Message to Master queued w/err=0: serial=102791 error=0 10:22:34 Received message from Master: op=Filter serial=102792 10:22:34 Color wheel filter change from 0 to 0 10:22:34 FLIGetFilterPos err=0 currentPosition=0 10:22:34 FLIGetStepsRemaining err=0 RemainingSteps=0 10:22:34 Filter is already there-color wheel unchanged 10:22:34 Received message from Master: op=Shutter serial=102793 10:22:34 Shutter LASER open 10:22:35 Received message from Camera: op=State serial=102795 10:22:35 GetSingleValue result=40 Value=cccccccc 10:22:35 SkyScan query 10:22:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:22:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:35 Parameters OK 10:22:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:35 Set A/D data flow result=40 10:22:35 Set A/D channel type result=40 10:22:35 Set A/D encoding result=40 10:22:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:35 Set channel filter=0.000000e+000 result=40 10:22:35 Config A/D Result=40 10:22:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:35 Get A/D filter: -9.255963e+061 result=40 10:22:35 Get A/D value=-858993460 result=40 10:22:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:35 Parameters OK 10:22:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:35 Set A/D data flow result=40 10:22:35 Set A/D channel type result=40 10:22:35 Set A/D encoding result=40 10:22:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:35 Set channel filter=0.000000e+000 result=40 10:22:35 Config A/D Result=40 10:22:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:35 Get A/D filter: -9.255963e+061 result=40 10:22:35 Get A/D value=-858993460 result=40 10:22:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:22:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:22:35 Aux= 10:22:35 Message to Camera, serial 102795 queued 10:22:44 Received message from Master: op=Shutter serial=102805 10:22:44 Shutter LASER close 10:22:44 Received message from Master: op=PointingHead serial=102809 10:22:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:22:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:22:44 Point started: ret=0 10:22:44 point_skyscan result=0 10:22:45 Check angles 10:22:45 SkyScan query 10:22:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.1<-21540 Statuses=0008 0009 10:22:46 Msec=0 True Az=112.995 Ze=-143.1 Az status=0008 Ze status=0009 10:22:46 Check angles 10:22:46 SkyScan query 10:22:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.145<-20143 Statuses=0008 0009 10:22:47 Msec=750 True Az=112.995 Ze=-122.145 Az status=0008 Ze status=0009 10:22:47 Check angles 10:22:47 SkyScan query 10:22:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.22<-18748 Statuses=0008 0009 10:22:47 Msec=1500 True Az=112.995 Ze=-101.22 Az status=0008 Ze status=0009 10:22:47 Check angles 10:22:47 SkyScan query 10:22:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.235<-17349 Statuses=0008 0009 10:22:48 Msec=2250 True Az=112.995 Ze=-80.235 Az status=0008 Ze status=0009 10:22:48 Check angles 10:22:48 SkyScan query 10:22:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.295<-15953 Statuses=0008 0009 10:22:49 Msec=3000 True Az=112.995 Ze=-59.295 Az status=0008 Ze status=0009 10:22:49 Check angles 10:22:49 SkyScan query 10:22:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.28<-14552 Statuses=0008 0009 10:22:50 Msec=3750 True Az=112.995 Ze=-38.28 Az status=0008 Ze status=0009 10:22:50 Check angles 10:22:50 SkyScan query 10:22:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.355<-13157 Statuses=0008 0009 10:22:50 Msec=4500 True Az=112.995 Ze=-17.355 Az status=0008 Ze status=0009 10:22:50 Check angles 10:22:50 SkyScan query 10:22:51 SkyScan query done: ret=0 az=112.995<-7533 ze=3.63<-11758 Statuses=0008 0009 10:22:51 Msec=5250 True Az=112.995 Ze=3.63 Az status=0008 Ze status=0009 10:22:51 Check angles 10:22:51 SkyScan query 10:22:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:22:52 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:22:52 Message to Master queued w/err=0: serial=102809 error=0 10:22:57 Received message from Master: op=Filter serial=102810 10:22:57 Color wheel filter change from 0 to 0 10:22:57 FLIGetFilterPos err=0 currentPosition=0 10:22:57 FLIGetStepsRemaining err=0 RemainingSteps=0 10:22:57 Filter is already there-color wheel unchanged 10:22:57 Received message from Master: op=Shutter serial=102811 10:22:57 Shutter LASER close 10:22:57 Received message from Camera: op=State serial=102813 10:22:57 GetSingleValue result=40 Value=cccccccc 10:22:57 SkyScan query 10:22:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:22:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:58 Parameters OK 10:22:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:58 Set A/D data flow result=40 10:22:58 Set A/D channel type result=40 10:22:58 Set A/D encoding result=40 10:22:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:58 Set channel filter=0.000000e+000 result=40 10:22:58 Config A/D Result=40 10:22:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:58 Get A/D filter: -9.255963e+061 result=40 10:22:58 Get A/D value=-858993460 result=40 10:22:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:58 Parameters OK 10:22:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:58 Set A/D data flow result=40 10:22:58 Set A/D channel type result=40 10:22:58 Set A/D encoding result=40 10:22:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:58 Set channel filter=0.000000e+000 result=40 10:22:58 Config A/D Result=40 10:22:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:58 Get A/D filter: -9.255963e+061 result=40 10:22:58 Get A/D value=-858993460 result=40 10:22:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:22:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:22:58 Aux= 10:22:58 Message to Camera, serial 102813 queued 10:23:35 Received message from Master: op=PointingHead serial=102826 10:23:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:23:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:23:35 Point started: ret=0 10:23:35 point_skyscan result=0 10:23:36 Check angles 10:23:36 SkyScan query 10:23:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:23:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:23:36 Message to Master queued w/err=0: serial=102826 error=0 10:23:41 Received message from Master: op=Filter serial=102827 10:23:41 Color wheel filter change from 0 to 0 10:23:41 FLIGetFilterPos err=0 currentPosition=0 10:23:41 FLIGetStepsRemaining err=0 RemainingSteps=0 10:23:41 Filter is already there-color wheel unchanged 10:23:41 Received message from Master: op=Shutter serial=102828 10:23:41 Shutter LASER close 10:23:41 Received message from Camera: op=State serial=102830 10:23:41 GetSingleValue result=40 Value=cccccccc 10:23:41 SkyScan query 10:23:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:23:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:42 Parameters OK 10:23:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:42 Set A/D data flow result=40 10:23:42 Set A/D channel type result=40 10:23:42 Set A/D encoding result=40 10:23:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:42 Set channel filter=0.000000e+000 result=40 10:23:42 Config A/D Result=40 10:23:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:42 Get A/D filter: -9.255963e+061 result=40 10:23:42 Get A/D value=-858993460 result=40 10:23:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:42 Parameters OK 10:23:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:42 Set A/D data flow result=40 10:23:42 Set A/D channel type result=40 10:23:42 Set A/D encoding result=40 10:23:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:42 Set channel filter=0.000000e+000 result=40 10:23:42 Config A/D Result=40 10:23:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:42 Get A/D filter: -9.255963e+061 result=40 10:23:42 Get A/D value=-858993460 result=40 10:23:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:23:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:23:42 Aux= 10:23:42 Message to Camera, serial 102830 queued [UTC 2019-3-4 10:23:50] 10:24:19 Received message from Master: op=PointingHead serial=102843 10:24:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:24:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:24:19 Point started: ret=0 10:24:19 point_skyscan result=0 10:24:20 Check angles 10:24:20 SkyScan query 10:24:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:24:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:24:21 Message to Master queued w/err=0: serial=102843 error=0 10:24:26 Received message from Master: op=Filter serial=102844 10:24:26 Color wheel filter change from 0 to 0 10:24:26 FLIGetFilterPos err=0 currentPosition=0 10:24:26 FLIGetStepsRemaining err=0 RemainingSteps=0 10:24:26 Filter is already there-color wheel unchanged 10:24:26 Received message from Master: op=Shutter serial=102845 10:24:26 Shutter LASER close 10:24:26 Received message from Camera: op=State serial=102847 10:24:26 GetSingleValue result=40 Value=cccccccc 10:24:26 SkyScan query 10:24:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:24:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:26 Parameters OK 10:24:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:26 Set A/D data flow result=40 10:24:26 Set A/D channel type result=40 10:24:26 Set A/D encoding result=40 10:24:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:26 Set channel filter=0.000000e+000 result=40 10:24:26 Config A/D Result=40 10:24:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:26 Get A/D filter: -9.255963e+061 result=40 10:24:26 Get A/D value=-858993460 result=40 10:24:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:26 Parameters OK 10:24:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:26 Set A/D data flow result=40 10:24:26 Set A/D channel type result=40 10:24:26 Set A/D encoding result=40 10:24:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:26 Set channel filter=0.000000e+000 result=40 10:24:26 Config A/D Result=40 10:24:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:26 Get A/D filter: -9.255963e+061 result=40 10:24:26 Get A/D value=-858993460 result=40 10:24:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:24:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:24:26 Aux= 10:24:26 Message to Camera, serial 102847 queued 10:25:03 Received message from Master: op=PointingHead serial=102860 10:25:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:25:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:25:04 Point started: ret=0 10:25:04 point_skyscan result=0 10:25:04 Check angles 10:25:04 SkyScan query 10:25:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:25:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:25:05 Message to Master queued w/err=0: serial=102860 error=0 10:25:10 Received message from Master: op=Filter serial=102861 10:25:10 Color wheel filter change from 0 to 0 10:25:10 FLIGetFilterPos err=0 currentPosition=0 10:25:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:25:10 Filter is already there-color wheel unchanged 10:25:10 Received message from Master: op=Shutter serial=102862 10:25:10 Shutter LASER close 10:25:10 Received message from Camera: op=State serial=102864 10:25:10 GetSingleValue result=40 Value=cccccccc 10:25:10 SkyScan query 10:25:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:25:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:11 Parameters OK 10:25:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:11 Set A/D data flow result=40 10:25:11 Set A/D channel type result=40 10:25:11 Set A/D encoding result=40 10:25:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:11 Set channel filter=0.000000e+000 result=40 10:25:11 Config A/D Result=40 10:25:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:11 Get A/D filter: -9.255963e+061 result=40 10:25:11 Get A/D value=-858993460 result=40 10:25:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:11 Parameters OK 10:25:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:11 Set A/D data flow result=40 10:25:11 Set A/D channel type result=40 10:25:11 Set A/D encoding result=40 10:25:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:11 Set channel filter=0.000000e+000 result=40 10:25:11 Config A/D Result=40 10:25:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:11 Get A/D filter: -9.255963e+061 result=40 10:25:11 Get A/D value=-858993460 result=40 10:25:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:25:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:25:11 Aux= 10:25:11 Message to Camera, serial 102864 queued 10:25:48 Received message from Master: op=PointingHead serial=102877 10:25:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:25:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:25:48 Point started: ret=0 10:25:48 point_skyscan result=0 10:25:49 Check angles 10:25:49 SkyScan query 10:25:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.775<-13585 Statuses=0008 0009 10:25:49 Msec=0 True Az=112.995 Ze=-23.775 Az status=0008 Ze status=0009 10:25:49 Check angles 10:25:49 SkyScan query 10:25:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.7<-14980 Statuses=0008 0009 10:25:50 Msec=750 True Az=112.995 Ze=-44.7 Az status=0008 Ze status=0009 10:25:50 Check angles 10:25:50 SkyScan query 10:25:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.76<-16384 Statuses=0008 0009 10:25:51 Msec=1500 True Az=112.995 Ze=-65.76 Az status=0008 Ze status=0009 10:25:51 Check angles 10:25:51 SkyScan query 10:25:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 10:25:51 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 10:25:52 Check angles 10:25:52 SkyScan query 10:25:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.565<-19171 Statuses=0008 0009 10:25:52 Msec=3000 True Az=112.995 Ze=-107.565 Az status=0008 Ze status=0009 10:25:52 Check angles 10:25:52 SkyScan query 10:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.52<-20568 Statuses=0008 0009 10:25:53 Msec=3750 True Az=112.995 Ze=-128.52 Az status=0008 Ze status=0009 10:25:53 Check angles 10:25:53 SkyScan query 10:25:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.505<-21967 Statuses=0008 0009 10:25:54 Msec=4500 True Az=112.995 Ze=-149.505 Az status=0008 Ze status=0009 10:25:54 Check angles 10:25:54 SkyScan query 10:25:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.445<-23363 Statuses=0008 0009 10:25:54 Msec=5250 True Az=112.995 Ze=-170.445 Az status=0008 Ze status=0009 10:25:55 Check angles 10:25:55 SkyScan query 10:25:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:25:55 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:25:55 Message to Master queued w/err=0: serial=102877 error=0 10:26:00 Received message from Master: op=Filter serial=102878 10:26:00 Color wheel filter change from 0 to 0 10:26:00 FLIGetFilterPos err=0 currentPosition=0 10:26:00 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:00 Filter is already there-color wheel unchanged 10:26:00 Received message from Master: op=Shutter serial=102879 10:26:00 Shutter LASER open 10:26:01 Received message from Camera: op=State serial=102881 10:26:01 GetSingleValue result=40 Value=cccccccc 10:26:01 SkyScan query 10:26:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:26:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:01 Parameters OK 10:26:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:01 Set A/D data flow result=40 10:26:01 Set A/D channel type result=40 10:26:01 Set A/D encoding result=40 10:26:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:01 Set channel filter=0.000000e+000 result=40 10:26:01 Config A/D Result=40 10:26:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:01 Get A/D filter: -9.255963e+061 result=40 10:26:01 Get A/D value=-858993460 result=40 10:26:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:01 Parameters OK 10:26:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:01 Set A/D data flow result=40 10:26:01 Set A/D channel type result=40 10:26:01 Set A/D encoding result=40 10:26:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:01 Set channel filter=0.000000e+000 result=40 10:26:01 Config A/D Result=40 10:26:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:01 Get A/D filter: -9.255963e+061 result=40 10:26:01 Get A/D value=-858993460 result=40 10:26:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:01 Aux= 10:26:01 Message to Camera, serial 102881 queued 10:26:10 Received message from Master: op=Shutter serial=102891 10:26:10 Shutter LASER close 10:26:10 Received message from Master: op=PointingHead serial=102895 10:26:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:26:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:26:11 Point started: ret=0 10:26:11 point_skyscan result=0 10:26:11 Check angles 10:26:11 SkyScan query 10:26:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.86<-21524 Statuses=0008 0009 10:26:12 Msec=0 True Az=112.995 Ze=-142.86 Az status=0008 Ze status=0009 10:26:12 Check angles 10:26:12 SkyScan query 10:26:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 10:26:13 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 10:26:13 Check angles 10:26:13 SkyScan query 10:26:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.95<-18730 Statuses=0008 0009 10:26:13 Msec=1500 True Az=112.995 Ze=-100.95 Az status=0008 Ze status=0009 10:26:14 Check angles 10:26:14 SkyScan query 10:26:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 10:26:14 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 10:26:14 Check angles 10:26:14 SkyScan query 10:26:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.025<-15935 Statuses=0008 0009 10:26:15 Msec=3000 True Az=112.995 Ze=-59.025 Az status=0008 Ze status=0009 10:26:15 Check angles 10:26:15 SkyScan query 10:26:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 10:26:16 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 10:26:16 Check angles 10:26:16 SkyScan query 10:26:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.1<-13140 Statuses=0008 0009 10:26:16 Msec=4500 True Az=112.995 Ze=-17.1 Az status=0008 Ze status=0009 10:26:17 Check angles 10:26:17 SkyScan query 10:26:17 SkyScan query done: ret=0 az=112.995<-7533 ze=3.87<-11742 Statuses=0008 0009 10:26:17 Msec=5250 True Az=112.995 Ze=3.87 Az status=0008 Ze status=0009 10:26:17 Check angles 10:26:17 SkyScan query 10:26:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:26:18 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:26:18 Message to Master queued w/err=0: serial=102895 error=0 10:26:23 Received message from Master: op=Filter serial=102896 10:26:23 Color wheel filter change from 0 to 0 10:26:23 FLIGetFilterPos err=0 currentPosition=0 10:26:23 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:23 Filter is already there-color wheel unchanged 10:26:23 Received message from Master: op=Shutter serial=102897 10:26:23 Shutter LASER close 10:26:23 Received message from Camera: op=State serial=102899 10:26:23 GetSingleValue result=40 Value=cccccccc 10:26:23 SkyScan query 10:26:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:26:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:24 Parameters OK 10:26:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:24 Set A/D data flow result=40 10:26:24 Set A/D channel type result=40 10:26:24 Set A/D encoding result=40 10:26:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:24 Set channel filter=0.000000e+000 result=40 10:26:24 Config A/D Result=40 10:26:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:24 Get A/D filter: -9.255963e+061 result=40 10:26:24 Get A/D value=-858993460 result=40 10:26:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:24 Parameters OK 10:26:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:24 Set A/D data flow result=40 10:26:24 Set A/D channel type result=40 10:26:24 Set A/D encoding result=40 10:26:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:24 Set channel filter=0.000000e+000 result=40 10:26:24 Config A/D Result=40 10:26:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:24 Get A/D filter: -9.255963e+061 result=40 10:26:24 Get A/D value=-858993460 result=40 10:26:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:24 Aux= 10:26:24 Message to Camera, serial 102899 queued 10:27:00 Received message from Master: op=PointingHead serial=102911 10:27:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:27:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:27:00 Point started: ret=0 10:27:00 point_skyscan result=0 10:27:01 Check angles 10:27:01 SkyScan query 10:27:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:27:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:27:01 Message to Master queued w/err=0: serial=102911 error=0 10:27:06 Received message from Master: op=Filter serial=102912 10:27:06 Color wheel filter change from 0 to 0 10:27:06 FLIGetFilterPos err=0 currentPosition=0 10:27:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:06 Filter is already there-color wheel unchanged 10:27:07 Received message from Master: op=Shutter serial=102913 10:27:07 Shutter LASER close 10:27:07 Received message from Camera: op=State serial=102915 10:27:07 GetSingleValue result=40 Value=cccccccc 10:27:07 SkyScan query 10:27:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:27:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:07 Parameters OK 10:27:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:07 Set A/D data flow result=40 10:27:07 Set A/D channel type result=40 10:27:07 Set A/D encoding result=40 10:27:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:07 Set channel filter=0.000000e+000 result=40 10:27:07 Config A/D Result=40 10:27:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:07 Get A/D filter: -9.255963e+061 result=40 10:27:07 Get A/D value=-858993460 result=40 10:27:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:07 Parameters OK 10:27:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:07 Set A/D data flow result=40 10:27:07 Set A/D channel type result=40 10:27:07 Set A/D encoding result=40 10:27:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:07 Set channel filter=0.000000e+000 result=40 10:27:07 Config A/D Result=40 10:27:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:07 Get A/D filter: -9.255963e+061 result=40 10:27:07 Get A/D value=-858993460 result=40 10:27:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:07 Aux= 10:27:07 Message to Camera, serial 102915 queued 10:27:44 Received message from Master: op=PointingHead serial=102928 10:27:44 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:27:44 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:27:44 Point started: ret=0 10:27:44 point_skyscan result=0 10:27:45 Check angles 10:27:45 SkyScan query 10:27:46 SkyScan query done: ret=0 az=135.84<-9056 ze=-6.51<-12434 Statuses=0009 0008 10:27:46 Msec=0 True Az=135.84 Ze=-6.51 Az status=0009 Ze status=0008 10:27:46 Check angles 10:27:46 SkyScan query 10:27:46 SkyScan query done: ret=0 az=153.33<-10222 ze=-6.495<-12433 Statuses=0009 0008 10:27:46 Msec=750 True Az=153.33 Ze=-6.495 Az status=0009 Ze status=0008 10:27:47 Check angles 10:27:47 SkyScan query 10:27:47 SkyScan query done: ret=0 az=170.835<-11389 ze=-6.495<-12433 Statuses=0009 0008 10:27:47 Msec=1500 True Az=170.835 Ze=-6.495 Az status=0009 Ze status=0008 10:27:47 Check angles 10:27:47 SkyScan query 10:27:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:27:48 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:27:48 Message to Master queued w/err=0: serial=102928 error=0 10:27:53 Received message from Master: op=Filter serial=102929 10:27:53 Color wheel filter change from 0 to 0 10:27:53 FLIGetFilterPos err=0 currentPosition=0 10:27:53 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:53 Filter is already there-color wheel unchanged 10:27:53 Received message from Master: op=Shutter serial=102930 10:27:53 Shutter LASER close 10:27:53 Received message from Camera: op=State serial=102932 10:27:53 GetSingleValue result=40 Value=cccccccc 10:27:53 SkyScan query 10:27:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:27:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:54 Parameters OK 10:27:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:54 Set A/D data flow result=40 10:27:54 Set A/D channel type result=40 10:27:54 Set A/D encoding result=40 10:27:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:54 Set channel filter=0.000000e+000 result=40 10:27:54 Config A/D Result=40 10:27:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:54 Get A/D filter: -9.255963e+061 result=40 10:27:54 Get A/D value=-858993460 result=40 10:27:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:54 Parameters OK 10:27:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:54 Set A/D data flow result=40 10:27:54 Set A/D channel type result=40 10:27:54 Set A/D encoding result=40 10:27:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:54 Set channel filter=0.000000e+000 result=40 10:27:54 Config A/D Result=40 10:27:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:54 Get A/D filter: -9.255963e+061 result=40 10:27:54 Get A/D value=-858993460 result=40 10:27:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:54 Aux= 10:27:54 Message to Camera, serial 102932 queued 10:28:31 Received message from Master: op=PointingHead serial=102945 10:28:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:28:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:28:31 Point started: ret=0 10:28:31 point_skyscan result=0 10:28:32 Check angles 10:28:32 SkyScan query 10:28:32 SkyScan query done: ret=0 az=152.64<-10176 ze=6.51<-11566 Statuses=0009 0008 10:28:32 Msec=0 True Az=152.64 Ze=6.51 Az status=0009 Ze status=0008 10:28:32 Check angles 10:28:32 SkyScan query 10:28:33 SkyScan query done: ret=0 az=134.82<-8988 ze=6.495<-11567 Statuses=0009 0008 10:28:33 Msec=750 True Az=134.82 Ze=6.495 Az status=0009 Ze status=0008 10:28:33 Check angles 10:28:33 SkyScan query 10:28:34 SkyScan query done: ret=0 az=117.24<-7816 ze=6.495<-11567 Statuses=0009 0008 10:28:34 Msec=1500 True Az=117.24 Ze=6.495 Az status=0009 Ze status=0008 10:28:34 Check angles 10:28:34 SkyScan query 10:28:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:28:35 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:28:35 Message to Master queued w/err=0: serial=102945 error=0 10:28:40 Received message from Master: op=Filter serial=102946 10:28:40 Color wheel filter change from 0 to 0 10:28:40 FLIGetFilterPos err=0 currentPosition=0 10:28:40 FLIGetStepsRemaining err=0 RemainingSteps=0 10:28:40 Filter is already there-color wheel unchanged 10:28:40 Received message from Master: op=Shutter serial=102947 10:28:40 Shutter LASER close 10:28:40 Received message from Camera: op=State serial=102949 10:28:40 GetSingleValue result=40 Value=cccccccc 10:28:40 SkyScan query 10:28:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:28:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:40 Parameters OK 10:28:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:40 Set A/D data flow result=40 10:28:40 Set A/D channel type result=40 10:28:40 Set A/D encoding result=40 10:28:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:40 Set channel filter=0.000000e+000 result=40 10:28:40 Config A/D Result=40 10:28:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:40 Get A/D filter: -9.255963e+061 result=40 10:28:40 Get A/D value=-858993460 result=40 10:28:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:40 Parameters OK 10:28:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:40 Set A/D data flow result=40 10:28:40 Set A/D channel type result=40 10:28:40 Set A/D encoding result=40 10:28:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:40 Set channel filter=0.000000e+000 result=40 10:28:40 Config A/D Result=40 10:28:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:40 Get A/D filter: -9.255963e+061 result=40 10:28:40 Get A/D value=-858993460 result=40 10:28:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:28:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:28:40 Aux= 10:28:40 Message to Camera, serial 102949 queued 10:29:17 Received message from Master: op=PointingHead serial=102962 10:29:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:29:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:29:17 Point started: ret=0 10:29:17 point_skyscan result=0 10:29:18 Check angles 10:29:18 SkyScan query 10:29:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 10:29:19 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 10:29:19 Check angles 10:29:19 SkyScan query 10:29:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.115<-14941 Statuses=0008 0009 10:29:20 Msec=750 True Az=112.995 Ze=-44.115 Az status=0008 Ze status=0009 10:29:20 Check angles 10:29:20 SkyScan query 10:29:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.445<-16363 Statuses=0008 0009 10:29:20 Msec=1500 True Az=112.995 Ze=-65.445 Az status=0008 Ze status=0009 10:29:20 Check angles 10:29:20 SkyScan query 10:29:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.385<-17759 Statuses=0008 0009 10:29:21 Msec=2250 True Az=112.995 Ze=-86.385 Az status=0008 Ze status=0009 10:29:21 Check angles 10:29:21 SkyScan query 10:29:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.34<-19156 Statuses=0008 0009 10:29:22 Msec=3000 True Az=112.995 Ze=-107.34 Az status=0008 Ze status=0009 10:29:22 Check angles 10:29:22 SkyScan query 10:29:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.295<-20553 Statuses=0008 0009 10:29:23 Msec=3750 True Az=112.995 Ze=-128.295 Az status=0008 Ze status=0009 10:29:23 Check angles 10:29:23 SkyScan query 10:29:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.28<-21952 Statuses=0008 0009 10:29:23 Msec=4500 True Az=112.995 Ze=-149.28 Az status=0008 Ze status=0009 10:29:23 Check angles 10:29:23 SkyScan query 10:29:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.22<-23348 Statuses=0008 0009 10:29:24 Msec=5250 True Az=112.995 Ze=-170.22 Az status=0008 Ze status=0009 10:29:24 Check angles 10:29:24 SkyScan query 10:29:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:29:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:29:25 Message to Master queued w/err=0: serial=102962 error=0 10:29:30 Received message from Master: op=Filter serial=102963 10:29:30 Color wheel filter change from 0 to 0 10:29:30 FLIGetFilterPos err=0 currentPosition=0 10:29:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:30 Filter is already there-color wheel unchanged 10:29:30 Received message from Master: op=Shutter serial=102964 10:29:30 Shutter LASER open 10:29:30 Received message from Camera: op=State serial=102966 10:29:30 GetSingleValue result=40 Value=cccccccc 10:29:30 SkyScan query 10:29:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:29:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:31 Parameters OK 10:29:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:31 Set A/D data flow result=40 10:29:31 Set A/D channel type result=40 10:29:31 Set A/D encoding result=40 10:29:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:31 Set channel filter=0.000000e+000 result=40 10:29:31 Config A/D Result=40 10:29:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:31 Get A/D filter: -9.255963e+061 result=40 10:29:31 Get A/D value=-858993460 result=40 10:29:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:31 Parameters OK 10:29:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:31 Set A/D data flow result=40 10:29:31 Set A/D channel type result=40 10:29:31 Set A/D encoding result=40 10:29:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:31 Set channel filter=0.000000e+000 result=40 10:29:31 Config A/D Result=40 10:29:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:31 Get A/D filter: -9.255963e+061 result=40 10:29:31 Get A/D value=-858993460 result=40 10:29:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:31 Aux= 10:29:31 Message to Camera, serial 102966 queued 10:29:39 Received message from Master: op=Shutter serial=102976 10:29:39 Shutter LASER close 10:29:40 Received message from Master: op=PointingHead serial=102980 10:29:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:29:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:29:40 Point started: ret=0 10:29:40 point_skyscan result=0 10:29:41 Check angles 10:29:41 SkyScan query 10:29:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.535<-21569 Statuses=0008 0009 10:29:41 Msec=0 True Az=112.995 Ze=-143.535 Az status=0008 Ze status=0009 10:29:41 Check angles 10:29:41 SkyScan query 10:29:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.625<-20175 Statuses=0008 0009 10:29:42 Msec=750 True Az=112.995 Ze=-122.625 Az status=0008 Ze status=0009 10:29:42 Check angles 10:29:42 SkyScan query 10:29:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.22<-18748 Statuses=0008 0009 10:29:43 Msec=1500 True Az=112.995 Ze=-101.22 Az status=0008 Ze status=0009 10:29:43 Check angles 10:29:43 SkyScan query 10:29:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.25<-17350 Statuses=0008 0009 10:29:44 Msec=2250 True Az=112.995 Ze=-80.25 Az status=0008 Ze status=0009 10:29:44 Check angles 10:29:44 SkyScan query 10:29:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.83<-15922 Statuses=0008 0009 10:29:44 Msec=3000 True Az=112.995 Ze=-58.83 Az status=0008 Ze status=0009 10:29:44 Check angles 10:29:44 SkyScan query 10:29:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.83<-14522 Statuses=0008 0009 10:29:45 Msec=3750 True Az=112.995 Ze=-37.83 Az status=0008 Ze status=0009 10:29:45 Check angles 10:29:45 SkyScan query 10:29:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.89<-13126 Statuses=0008 0009 10:29:46 Msec=4500 True Az=112.995 Ze=-16.89 Az status=0008 Ze status=0009 10:29:46 Check angles 10:29:46 SkyScan query 10:29:47 SkyScan query done: ret=0 az=113.01<-7534 ze=4.38<-11708 Statuses=0008 0009 10:29:47 Msec=5250 True Az=113.01 Ze=4.38 Az status=0008 Ze status=0009 10:29:47 Check angles 10:29:47 SkyScan query 10:29:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:29:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:29:47 Message to Master queued w/err=0: serial=102980 error=0 10:29:52 Received message from Master: op=Filter serial=102981 10:29:52 Color wheel filter change from 0 to 0 10:29:52 FLIGetFilterPos err=0 currentPosition=0 10:29:52 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:52 Filter is already there-color wheel unchanged 10:29:52 Received message from Master: op=Shutter serial=102982 10:29:52 Shutter LASER close 10:29:53 Received message from Camera: op=State serial=102984 10:29:53 GetSingleValue result=40 Value=cccccccc 10:29:53 SkyScan query 10:29:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:29:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:53 Parameters OK 10:29:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:53 Set A/D data flow result=40 10:29:53 Set A/D channel type result=40 10:29:53 Set A/D encoding result=40 10:29:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:53 Set channel filter=0.000000e+000 result=40 10:29:53 Config A/D Result=40 10:29:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:53 Get A/D filter: -9.255963e+061 result=40 10:29:53 Get A/D value=-858993460 result=40 10:29:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:53 Parameters OK 10:29:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:53 Set A/D data flow result=40 10:29:53 Set A/D channel type result=40 10:29:53 Set A/D encoding result=40 10:29:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:53 Set channel filter=0.000000e+000 result=40 10:29:53 Config A/D Result=40 10:29:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:53 Get A/D filter: -9.255963e+061 result=40 10:29:53 Get A/D value=-858993460 result=40 10:29:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:53 Aux= 10:29:53 Message to Camera, serial 102984 queued 10:30:30 Received message from Master: op=PointingHead serial=102997 10:30:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:30:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:30:30 Point started: ret=0 10:30:30 point_skyscan result=0 10:30:31 Check angles 10:30:31 SkyScan query 10:30:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:30:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:30:32 Message to Master queued w/err=0: serial=102997 error=0 10:30:37 Received message from Master: op=Filter serial=102998 10:30:37 Color wheel filter change from 0 to 0 10:30:37 FLIGetFilterPos err=0 currentPosition=0 10:30:37 FLIGetStepsRemaining err=0 RemainingSteps=0 10:30:37 Filter is already there-color wheel unchanged 10:30:37 Received message from Master: op=Shutter serial=102999 10:30:37 Shutter LASER close 10:30:37 Received message from Camera: op=State serial=103001 10:30:37 GetSingleValue result=40 Value=cccccccc 10:30:37 SkyScan query 10:30:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:30:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:38 Parameters OK 10:30:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:38 Set A/D data flow result=40 10:30:38 Set A/D channel type result=40 10:30:38 Set A/D encoding result=40 10:30:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:38 Set channel filter=0.000000e+000 result=40 10:30:38 Config A/D Result=40 10:30:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:38 Get A/D filter: -9.255963e+061 result=40 10:30:38 Get A/D value=-858993460 result=40 10:30:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:38 Parameters OK 10:30:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:38 Set A/D data flow result=40 10:30:38 Set A/D channel type result=40 10:30:38 Set A/D encoding result=40 10:30:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:38 Set channel filter=0.000000e+000 result=40 10:30:38 Config A/D Result=40 10:30:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:38 Get A/D filter: -9.255963e+061 result=40 10:30:38 Get A/D value=-858993460 result=40 10:30:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:30:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:30:38 Aux= 10:30:38 Message to Camera, serial 103001 queued 10:31:14 Received message from Master: op=PointingHead serial=103014 10:31:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:31:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:31:15 Point started: ret=0 10:31:15 point_skyscan result=0 10:31:16 Check angles 10:31:16 SkyScan query 10:31:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:31:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:31:16 Message to Master queued w/err=0: serial=103014 error=0 10:31:21 Received message from Master: op=Filter serial=103015 10:31:21 Color wheel filter change from 0 to 0 10:31:21 FLIGetFilterPos err=0 currentPosition=0 10:31:21 FLIGetStepsRemaining err=0 RemainingSteps=0 10:31:21 Filter is already there-color wheel unchanged 10:31:21 Received message from Master: op=Shutter serial=103016 10:31:21 Shutter LASER close 10:31:21 Received message from Camera: op=State serial=103018 10:31:21 GetSingleValue result=40 Value=cccccccc 10:31:21 SkyScan query 10:31:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:31:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:22 Parameters OK 10:31:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:22 Set A/D data flow result=40 10:31:22 Set A/D channel type result=40 10:31:22 Set A/D encoding result=40 10:31:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:22 Set channel filter=0.000000e+000 result=40 10:31:22 Config A/D Result=40 10:31:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:22 Get A/D filter: -9.255963e+061 result=40 10:31:22 Get A/D value=-858993460 result=40 10:31:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:22 Parameters OK 10:31:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:22 Set A/D data flow result=40 10:31:22 Set A/D channel type result=40 10:31:22 Set A/D encoding result=40 10:31:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:22 Set channel filter=0.000000e+000 result=40 10:31:22 Config A/D Result=40 10:31:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:22 Get A/D filter: -9.255963e+061 result=40 10:31:22 Get A/D value=-858993460 result=40 10:31:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:31:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:31:22 Aux= 10:31:22 Message to Camera, serial 103018 queued 10:31:59 Received message from Master: op=PointingHead serial=103031 10:31:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:31:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:31:59 Point started: ret=0 10:31:59 point_skyscan result=0 10:32:00 Check angles 10:32:00 SkyScan query 10:32:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:32:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:32:00 Message to Master queued w/err=0: serial=103031 error=0 10:32:05 Received message from Master: op=Filter serial=103032 10:32:05 Color wheel filter change from 0 to 0 10:32:05 FLIGetFilterPos err=0 currentPosition=0 10:32:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:32:05 Filter is already there-color wheel unchanged 10:32:06 Received message from Master: op=Shutter serial=103033 10:32:06 Shutter LASER close 10:32:06 Received message from Camera: op=State serial=103035 10:32:06 GetSingleValue result=40 Value=cccccccc 10:32:06 SkyScan query 10:32:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:32:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:06 Parameters OK 10:32:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:06 Set A/D data flow result=40 10:32:06 Set A/D channel type result=40 10:32:06 Set A/D encoding result=40 10:32:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:06 Set channel filter=0.000000e+000 result=40 10:32:06 Config A/D Result=40 10:32:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:06 Get A/D filter: -9.255963e+061 result=40 10:32:06 Get A/D value=-858993460 result=40 10:32:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:06 Parameters OK 10:32:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:06 Set A/D data flow result=40 10:32:06 Set A/D channel type result=40 10:32:06 Set A/D encoding result=40 10:32:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:06 Set channel filter=0.000000e+000 result=40 10:32:06 Config A/D Result=40 10:32:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:06 Get A/D filter: -9.255963e+061 result=40 10:32:06 Get A/D value=-858993460 result=40 10:32:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:32:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:32:06 Aux= 10:32:06 Message to Camera, serial 103035 queued 10:32:43 Received message from Master: op=PointingHead serial=103048 10:32:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:32:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:32:43 Point started: ret=0 10:32:43 point_skyscan result=0 10:32:44 Check angles 10:32:44 SkyScan query 10:32:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 10:32:45 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 10:32:45 Check angles 10:32:45 SkyScan query 10:32:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.325<-14955 Statuses=0008 0009 10:32:45 Msec=750 True Az=112.995 Ze=-44.325 Az status=0008 Ze status=0009 10:32:46 Check angles 10:32:46 SkyScan query 10:32:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.25<-16350 Statuses=0008 0009 10:32:46 Msec=1500 True Az=112.995 Ze=-65.25 Az status=0008 Ze status=0009 10:32:46 Check angles 10:32:46 SkyScan query 10:32:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.19<-17746 Statuses=0008 0009 10:32:47 Msec=2250 True Az=112.995 Ze=-86.19 Az status=0008 Ze status=0009 10:32:47 Check angles 10:32:47 SkyScan query 10:32:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.145<-19143 Statuses=0008 0009 10:32:48 Msec=3000 True Az=112.995 Ze=-107.145 Az status=0008 Ze status=0009 10:32:48 Check angles 10:32:48 SkyScan query 10:32:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.1<-20540 Statuses=0008 0009 10:32:48 Msec=3750 True Az=112.995 Ze=-128.1 Az status=0008 Ze status=0009 10:32:49 Check angles 10:32:49 SkyScan query 10:32:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.055<-21937 Statuses=0008 0009 10:32:49 Msec=4500 True Az=112.995 Ze=-149.055 Az status=0008 Ze status=0009 10:32:49 Check angles 10:32:49 SkyScan query 10:32:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.01<-23334 Statuses=0008 0009 10:32:50 Msec=5250 True Az=112.995 Ze=-170.01 Az status=0008 Ze status=0009 10:32:50 Check angles 10:32:50 SkyScan query 10:32:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:32:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:32:51 Message to Master queued w/err=0: serial=103048 error=0 10:32:56 Received message from Master: op=Filter serial=103049 10:32:56 Color wheel filter change from 0 to 0 10:32:56 FLIGetFilterPos err=0 currentPosition=0 10:32:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:32:56 Filter is already there-color wheel unchanged 10:32:56 Received message from Master: op=Shutter serial=103050 10:32:56 Shutter LASER open 10:32:56 Received message from Camera: op=State serial=103052 10:32:56 GetSingleValue result=40 Value=cccccccc 10:32:56 SkyScan query 10:32:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:32:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:57 Parameters OK 10:32:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:57 Set A/D data flow result=40 10:32:57 Set A/D channel type result=40 10:32:57 Set A/D encoding result=40 10:32:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:57 Set channel filter=0.000000e+000 result=40 10:32:57 Config A/D Result=40 10:32:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:57 Get A/D filter: -9.255963e+061 result=40 10:32:57 Get A/D value=-858993460 result=40 10:32:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:57 Parameters OK 10:32:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:57 Set A/D data flow result=40 10:32:57 Set A/D channel type result=40 10:32:57 Set A/D encoding result=40 10:32:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:57 Set channel filter=0.000000e+000 result=40 10:32:57 Config A/D Result=40 10:32:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:57 Get A/D filter: -9.255963e+061 result=40 10:32:57 Get A/D value=-858993460 result=40 10:32:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:32:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:32:57 Aux= 10:32:57 Message to Camera, serial 103052 queued 10:33:05 Received message from Master: op=Shutter serial=103062 10:33:05 Shutter LASER close 10:33:06 Received message from Master: op=PointingHead serial=103066 10:33:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:33:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:33:06 Point started: ret=0 10:33:06 point_skyscan result=0 10:33:07 Check angles 10:33:07 SkyScan query 10:33:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.01<-21534 Statuses=0008 0009 10:33:07 Msec=0 True Az=112.995 Ze=-143.01 Az status=0008 Ze status=0009 10:33:07 Check angles 10:33:07 SkyScan query 10:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.01<-20134 Statuses=0008 0009 10:33:08 Msec=750 True Az=112.995 Ze=-122.01 Az status=0008 Ze status=0009 10:33:08 Check angles 10:33:08 SkyScan query 10:33:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 10:33:09 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 10:33:09 Check angles 10:33:09 SkyScan query 10:33:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 10:33:10 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 10:33:10 Check angles 10:33:10 SkyScan query 10:33:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 10:33:10 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 10:33:10 Check angles 10:33:10 SkyScan query 10:33:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.175<-14545 Statuses=0008 0009 10:33:11 Msec=3750 True Az=112.995 Ze=-38.175 Az status=0008 Ze status=0009 10:33:11 Check angles 10:33:11 SkyScan query 10:33:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.25<-13150 Statuses=0008 0009 10:33:12 Msec=4500 True Az=112.995 Ze=-17.25 Az status=0008 Ze status=0009 10:33:12 Check angles 10:33:12 SkyScan query 10:33:13 SkyScan query done: ret=0 az=112.995<-7533 ze=3.735<-11751 Statuses=0008 0009 10:33:13 Msec=5250 True Az=112.995 Ze=3.735 Az status=0008 Ze status=0009 10:33:13 Check angles 10:33:13 SkyScan query 10:33:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:33:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:33:13 Message to Master queued w/err=0: serial=103066 error=0 10:33:18 Received message from Master: op=Filter serial=103067 10:33:18 Color wheel filter change from 0 to 0 10:33:18 FLIGetFilterPos err=0 currentPosition=0 10:33:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:33:18 Filter is already there-color wheel unchanged 10:33:18 Received message from Master: op=Shutter serial=103068 10:33:18 Shutter LASER close 10:33:19 Received message from Camera: op=State serial=103070 10:33:19 GetSingleValue result=40 Value=cccccccc 10:33:19 SkyScan query 10:33:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:33:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:19 Parameters OK 10:33:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:19 Set A/D data flow result=40 10:33:19 Set A/D channel type result=40 10:33:19 Set A/D encoding result=40 10:33:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:19 Set channel filter=0.000000e+000 result=40 10:33:19 Config A/D Result=40 10:33:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:19 Get A/D filter: -9.255963e+061 result=40 10:33:19 Get A/D value=-858993460 result=40 10:33:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:19 Parameters OK 10:33:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:19 Set A/D data flow result=40 10:33:19 Set A/D channel type result=40 10:33:19 Set A/D encoding result=40 10:33:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:19 Set channel filter=0.000000e+000 result=40 10:33:19 Config A/D Result=40 10:33:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:19 Get A/D filter: -9.255963e+061 result=40 10:33:19 Get A/D value=-858993460 result=40 10:33:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:33:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:33:19 Aux= 10:33:19 Message to Camera, serial 103070 queued 10:33:38 Received message from Master: op=Identify serial=103071 10:33:56 Received message from Master: op=PointingHead serial=103086 10:33:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:33:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:33:56 Point started: ret=0 10:33:56 point_skyscan result=0 10:33:57 Check angles 10:33:57 SkyScan query 10:33:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:33:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:33:58 Message to Master queued w/err=0: serial=103086 error=0 10:34:03 Received message from Master: op=Filter serial=103087 10:34:03 Color wheel filter change from 0 to 0 10:34:03 FLIGetFilterPos err=0 currentPosition=0 10:34:03 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:03 Filter is already there-color wheel unchanged 10:34:03 Received message from Master: op=Shutter serial=103088 10:34:03 Shutter LASER close 10:34:03 Received message from Camera: op=State serial=103090 10:34:03 GetSingleValue result=40 Value=cccccccc 10:34:03 SkyScan query 10:34:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:34:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:04 Parameters OK 10:34:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:04 Set A/D data flow result=40 10:34:04 Set A/D channel type result=40 10:34:04 Set A/D encoding result=40 10:34:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:04 Set channel filter=0.000000e+000 result=40 10:34:04 Config A/D Result=40 10:34:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:04 Get A/D filter: -9.255963e+061 result=40 10:34:04 Get A/D value=-858993460 result=40 10:34:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:04 Parameters OK 10:34:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:04 Set A/D data flow result=40 10:34:04 Set A/D channel type result=40 10:34:04 Set A/D encoding result=40 10:34:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:04 Set channel filter=0.000000e+000 result=40 10:34:04 Config A/D Result=40 10:34:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:04 Get A/D filter: -9.255963e+061 result=40 10:34:04 Get A/D value=-858993460 result=40 10:34:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:04 Aux= 10:34:04 Message to Camera, serial 103090 queued 10:34:40 Received message from Master: op=PointingHead serial=103103 10:34:40 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:34:40 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:34:41 Point started: ret=0 10:34:41 point_skyscan result=0 10:34:41 Check angles 10:34:41 SkyScan query 10:34:42 SkyScan query done: ret=0 az=136.485<-9099 ze=-6.51<-12434 Statuses=0009 0008 10:34:42 Msec=0 True Az=136.485 Ze=-6.51 Az status=0009 Ze status=0008 10:34:42 Check angles 10:34:42 SkyScan query [UTC 2019-3-4 10:34:43] 10:34:43 SkyScan query done: ret=0 az=153.945<-10263 ze=-6.51<-12434 Statuses=0009 0008 10:34:43 Msec=750 True Az=153.945 Ze=-6.51 Az status=0009 Ze status=0008 10:34:43 Check angles 10:34:43 SkyScan query 10:34:44 SkyScan query done: ret=0 az=171.36<-11424 ze=-6.495<-12433 Statuses=0009 0008 10:34:44 Msec=1500 True Az=171.36 Ze=-6.495 Az status=0009 Ze status=0008 10:34:44 Check angles 10:34:44 SkyScan query 10:34:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:34:44 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:34:44 Message to Master queued w/err=0: serial=103103 error=0 10:34:49 Received message from Master: op=Filter serial=103104 10:34:49 Color wheel filter change from 0 to 0 10:34:49 FLIGetFilterPos err=0 currentPosition=0 10:34:49 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:49 Filter is already there-color wheel unchanged 10:34:49 Received message from Master: op=Shutter serial=103105 10:34:49 Shutter LASER close 10:34:50 Received message from Camera: op=State serial=103107 10:34:50 GetSingleValue result=40 Value=cccccccc 10:34:50 SkyScan query 10:34:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:34:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:50 Parameters OK 10:34:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:50 Set A/D data flow result=40 10:34:50 Set A/D channel type result=40 10:34:50 Set A/D encoding result=40 10:34:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:50 Set channel filter=0.000000e+000 result=40 10:34:50 Config A/D Result=40 10:34:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:50 Get A/D filter: -9.255963e+061 result=40 10:34:50 Get A/D value=-858993460 result=40 10:34:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:50 Parameters OK 10:34:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:50 Set A/D data flow result=40 10:34:50 Set A/D channel type result=40 10:34:50 Set A/D encoding result=40 10:34:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:50 Set channel filter=0.000000e+000 result=40 10:34:50 Config A/D Result=40 10:34:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:50 Get A/D filter: -9.255963e+061 result=40 10:34:50 Get A/D value=-858993460 result=40 10:34:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:50 Aux= 10:34:50 Message to Camera, serial 103107 queued 10:35:27 Received message from Master: op=PointingHead serial=103120 10:35:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:35:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:35:27 Point started: ret=0 10:35:27 point_skyscan result=0 10:35:28 Check angles 10:35:28 SkyScan query 10:35:29 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 10:35:29 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 10:35:29 Check angles 10:35:29 SkyScan query 10:35:29 SkyScan query done: ret=0 az=134.67<-8978 ze=6.495<-11567 Statuses=0009 0008 10:35:29 Msec=750 True Az=134.67 Ze=6.495 Az status=0009 Ze status=0008 10:35:30 Check angles 10:35:30 SkyScan query 10:35:30 SkyScan query done: ret=0 az=117.24<-7816 ze=6.495<-11567 Statuses=0009 0008 10:35:30 Msec=1500 True Az=117.24 Ze=6.495 Az status=0009 Ze status=0008 10:35:30 Check angles 10:35:30 SkyScan query 10:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:35:31 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:35:31 Message to Master queued w/err=0: serial=103120 error=0 10:35:36 Received message from Master: op=Filter serial=103121 10:35:36 Color wheel filter change from 0 to 0 10:35:36 FLIGetFilterPos err=0 currentPosition=0 10:35:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:35:36 Filter is already there-color wheel unchanged 10:35:36 Received message from Master: op=Shutter serial=103122 10:35:36 Shutter LASER close 10:35:36 Received message from Camera: op=State serial=103124 10:35:36 GetSingleValue result=40 Value=cccccccc 10:35:36 SkyScan query 10:35:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:35:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:37 Parameters OK 10:35:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:37 Set A/D data flow result=40 10:35:37 Set A/D channel type result=40 10:35:37 Set A/D encoding result=40 10:35:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:37 Set channel filter=0.000000e+000 result=40 10:35:37 Config A/D Result=40 10:35:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:37 Get A/D filter: -9.255963e+061 result=40 10:35:37 Get A/D value=-858993460 result=40 10:35:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:37 Parameters OK 10:35:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:37 Set A/D data flow result=40 10:35:37 Set A/D channel type result=40 10:35:37 Set A/D encoding result=40 10:35:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:37 Set channel filter=0.000000e+000 result=40 10:35:37 Config A/D Result=40 10:35:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:37 Get A/D filter: -9.255963e+061 result=40 10:35:37 Get A/D value=-858993460 result=40 10:35:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:35:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:35:37 Aux= 10:35:37 Message to Camera, serial 103124 queued 10:36:13 Received message from Master: op=PointingHead serial=103136 10:36:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:36:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:36:13 Point started: ret=0 10:36:13 point_skyscan result=0 10:36:14 Check angles 10:36:14 SkyScan query 10:36:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 10:36:14 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 10:36:14 Check angles 10:36:14 SkyScan query 10:36:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.52<-14968 Statuses=0008 0009 10:36:15 Msec=750 True Az=112.995 Ze=-44.52 Az status=0008 Ze status=0009 10:36:15 Check angles 10:36:15 SkyScan query 10:36:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.475<-16365 Statuses=0008 0009 10:36:16 Msec=1500 True Az=112.995 Ze=-65.475 Az status=0008 Ze status=0009 10:36:16 Check angles 10:36:16 SkyScan query 10:36:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.88<-17792 Statuses=0008 0009 10:36:17 Msec=2250 True Az=112.995 Ze=-86.88 Az status=0008 Ze status=0009 10:36:17 Check angles 10:36:17 SkyScan query 10:36:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.865<-19191 Statuses=0008 0009 10:36:17 Msec=3000 True Az=112.995 Ze=-107.865 Az status=0008 Ze status=0009 10:36:17 Check angles 10:36:17 SkyScan query 10:36:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.24<-20616 Statuses=0008 0009 10:36:18 Msec=3750 True Az=112.995 Ze=-129.24 Az status=0008 Ze status=0009 10:36:18 Check angles 10:36:18 SkyScan query 10:36:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.18<-22012 Statuses=0008 0009 10:36:19 Msec=4500 True Az=112.995 Ze=-150.18 Az status=0008 Ze status=0009 10:36:19 Check angles 10:36:19 SkyScan query 10:36:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-171<-23400 Statuses=0008 0009 10:36:20 Msec=5250 True Az=112.995 Ze=-171 Az status=0008 Ze status=0009 10:36:20 Check angles 10:36:20 SkyScan query 10:36:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:36:20 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:36:20 Message to Master queued w/err=0: serial=103136 error=0 10:36:25 Received message from Master: op=Filter serial=103137 10:36:25 Color wheel filter change from 0 to 0 10:36:25 FLIGetFilterPos err=0 currentPosition=0 10:36:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:36:25 Filter is already there-color wheel unchanged 10:36:25 Received message from Master: op=Shutter serial=103138 10:36:25 Shutter LASER open 10:36:26 Received message from Camera: op=State serial=103140 10:36:26 GetSingleValue result=40 Value=cccccccc 10:36:26 SkyScan query 10:36:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:36:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:26 Parameters OK 10:36:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:26 Set A/D data flow result=40 10:36:26 Set A/D channel type result=40 10:36:26 Set A/D encoding result=40 10:36:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:26 Set channel filter=0.000000e+000 result=40 10:36:26 Config A/D Result=40 10:36:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:26 Get A/D filter: -9.255963e+061 result=40 10:36:26 Get A/D value=-858993460 result=40 10:36:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:26 Parameters OK 10:36:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:26 Set A/D data flow result=40 10:36:26 Set A/D channel type result=40 10:36:26 Set A/D encoding result=40 10:36:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:26 Set channel filter=0.000000e+000 result=40 10:36:26 Config A/D Result=40 10:36:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:26 Get A/D filter: -9.255963e+061 result=40 10:36:26 Get A/D value=-858993460 result=40 10:36:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:36:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:36:26 Aux= 10:36:26 Message to Camera, serial 103140 queued 10:36:35 Received message from Master: op=Shutter serial=103150 10:36:35 Shutter LASER close 10:36:35 Received message from Master: op=PointingHead serial=103154 10:36:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:36:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:36:35 Point started: ret=0 10:36:35 point_skyscan result=0 10:36:36 Check angles 10:36:36 SkyScan query 10:36:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.475<-21565 Statuses=0008 0009 10:36:37 Msec=0 True Az=112.995 Ze=-143.475 Az status=0008 Ze status=0009 10:36:37 Check angles 10:36:37 SkyScan query 10:36:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.55<-20170 Statuses=0008 0009 10:36:38 Msec=750 True Az=112.995 Ze=-122.55 Az status=0008 Ze status=0009 10:36:38 Check angles 10:36:38 SkyScan query 10:36:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.175<-18745 Statuses=0008 0009 10:36:38 Msec=1500 True Az=112.995 Ze=-101.175 Az status=0008 Ze status=0009 10:36:38 Check angles 10:36:38 SkyScan query 10:36:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.205<-17347 Statuses=0008 0009 10:36:39 Msec=2250 True Az=112.995 Ze=-80.205 Az status=0008 Ze status=0009 10:36:39 Check angles 10:36:39 SkyScan query 10:36:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 10:36:40 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 10:36:40 Check angles 10:36:40 SkyScan query 10:36:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.785<-14519 Statuses=0008 0009 10:36:41 Msec=3750 True Az=112.995 Ze=-37.785 Az status=0008 Ze status=0009 10:36:41 Check angles 10:36:41 SkyScan query 10:36:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.845<-13123 Statuses=0008 0009 10:36:41 Msec=4500 True Az=112.995 Ze=-16.845 Az status=0008 Ze status=0009 10:36:41 Check angles 10:36:41 SkyScan query 10:36:42 SkyScan query done: ret=0 az=112.995<-7533 ze=4.095<-11727 Statuses=0008 0009 10:36:42 Msec=5250 True Az=112.995 Ze=4.095 Az status=0008 Ze status=0009 10:36:42 Check angles 10:36:42 SkyScan query 10:36:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:36:43 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:36:43 Message to Master queued w/err=0: serial=103154 error=0 10:36:48 Received message from Master: op=Filter serial=103155 10:36:48 Color wheel filter change from 0 to 0 10:36:48 FLIGetFilterPos err=0 currentPosition=0 10:36:48 FLIGetStepsRemaining err=0 RemainingSteps=0 10:36:48 Filter is already there-color wheel unchanged 10:36:48 Received message from Master: op=Shutter serial=103156 10:36:48 Shutter LASER close 10:36:48 Received message from Camera: op=State serial=103158 10:36:48 GetSingleValue result=40 Value=cccccccc 10:36:48 SkyScan query 10:36:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:36:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:49 Parameters OK 10:36:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:49 Set A/D data flow result=40 10:36:49 Set A/D channel type result=40 10:36:49 Set A/D encoding result=40 10:36:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:49 Set channel filter=0.000000e+000 result=40 10:36:49 Config A/D Result=40 10:36:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:49 Get A/D filter: -9.255963e+061 result=40 10:36:49 Get A/D value=-858993460 result=40 10:36:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:49 Parameters OK 10:36:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:49 Set A/D data flow result=40 10:36:49 Set A/D channel type result=40 10:36:49 Set A/D encoding result=40 10:36:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:49 Set channel filter=0.000000e+000 result=40 10:36:49 Config A/D Result=40 10:36:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:49 Get A/D filter: -9.255963e+061 result=40 10:36:49 Get A/D value=-858993460 result=40 10:36:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:36:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:36:49 Aux= 10:36:49 Message to Camera, serial 103158 queued 10:37:26 Received message from Master: op=PointingHead serial=103171 10:37:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:37:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:37:26 Point started: ret=0 10:37:26 point_skyscan result=0 10:37:27 Check angles 10:37:27 SkyScan query 10:37:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:37:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:37:27 Message to Master queued w/err=0: serial=103171 error=0 10:37:32 Received message from Master: op=Filter serial=103172 10:37:32 Color wheel filter change from 0 to 0 10:37:32 FLIGetFilterPos err=0 currentPosition=0 10:37:32 FLIGetStepsRemaining err=0 RemainingSteps=0 10:37:32 Filter is already there-color wheel unchanged 10:37:32 Received message from Master: op=Shutter serial=103173 10:37:32 Shutter LASER close 10:37:32 Received message from Camera: op=State serial=103175 10:37:32 GetSingleValue result=40 Value=cccccccc 10:37:32 SkyScan query 10:37:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:37:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:33 Parameters OK 10:37:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:33 Set A/D data flow result=40 10:37:33 Set A/D channel type result=40 10:37:33 Set A/D encoding result=40 10:37:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:33 Set channel filter=0.000000e+000 result=40 10:37:33 Config A/D Result=40 10:37:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:33 Get A/D filter: -9.255963e+061 result=40 10:37:33 Get A/D value=-858993460 result=40 10:37:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:33 Parameters OK 10:37:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:33 Set A/D data flow result=40 10:37:33 Set A/D channel type result=40 10:37:33 Set A/D encoding result=40 10:37:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:33 Set channel filter=0.000000e+000 result=40 10:37:33 Config A/D Result=40 10:37:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:33 Get A/D filter: -9.255963e+061 result=40 10:37:33 Get A/D value=-858993460 result=40 10:37:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:37:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:37:33 Aux= 10:37:33 Message to Camera, serial 103175 queued 10:38:10 Received message from Master: op=PointingHead serial=103188 10:38:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:38:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:38:10 Point started: ret=0 10:38:10 point_skyscan result=0 10:38:11 Check angles 10:38:11 SkyScan query 10:38:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:38:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:38:12 Message to Master queued w/err=0: serial=103188 error=0 10:38:17 Received message from Master: op=Filter serial=103189 10:38:17 Color wheel filter change from 0 to 0 10:38:17 FLIGetFilterPos err=0 currentPosition=0 10:38:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:38:17 Filter is already there-color wheel unchanged 10:38:17 Received message from Master: op=Shutter serial=103190 10:38:17 Shutter LASER close 10:38:17 Received message from Camera: op=State serial=103192 10:38:17 GetSingleValue result=40 Value=cccccccc 10:38:17 SkyScan query 10:38:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:38:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:17 Parameters OK 10:38:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:17 Set A/D data flow result=40 10:38:17 Set A/D channel type result=40 10:38:17 Set A/D encoding result=40 10:38:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:17 Set channel filter=0.000000e+000 result=40 10:38:17 Config A/D Result=40 10:38:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:17 Get A/D filter: -9.255963e+061 result=40 10:38:17 Get A/D value=-858993460 result=40 10:38:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:17 Parameters OK 10:38:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:17 Set A/D data flow result=40 10:38:17 Set A/D channel type result=40 10:38:17 Set A/D encoding result=40 10:38:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:17 Set channel filter=0.000000e+000 result=40 10:38:17 Config A/D Result=40 10:38:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:17 Get A/D filter: -9.255963e+061 result=40 10:38:17 Get A/D value=-858993460 result=40 10:38:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:38:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:38:17 Aux= 10:38:17 Message to Camera, serial 103192 queued 10:38:54 Received message from Master: op=PointingHead serial=103205 10:38:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:38:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:38:54 Point started: ret=0 10:38:54 point_skyscan result=0 10:38:55 Check angles 10:38:55 SkyScan query 10:38:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:38:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:38:56 Message to Master queued w/err=0: serial=103205 error=0 10:39:01 Received message from Master: op=Filter serial=103206 10:39:01 Color wheel filter change from 0 to 0 10:39:01 FLIGetFilterPos err=0 currentPosition=0 10:39:01 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:01 Filter is already there-color wheel unchanged 10:39:01 Received message from Master: op=Shutter serial=103207 10:39:01 Shutter LASER close 10:39:01 Received message from Camera: op=State serial=103209 10:39:01 GetSingleValue result=40 Value=cccccccc 10:39:01 SkyScan query 10:39:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:39:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:02 Parameters OK 10:39:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:02 Set A/D data flow result=40 10:39:02 Set A/D channel type result=40 10:39:02 Set A/D encoding result=40 10:39:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:02 Set channel filter=0.000000e+000 result=40 10:39:02 Config A/D Result=40 10:39:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:02 Get A/D filter: -9.255963e+061 result=40 10:39:02 Get A/D value=-858993460 result=40 10:39:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:02 Parameters OK 10:39:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:02 Set A/D data flow result=40 10:39:02 Set A/D channel type result=40 10:39:02 Set A/D encoding result=40 10:39:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:02 Set channel filter=0.000000e+000 result=40 10:39:02 Config A/D Result=40 10:39:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:02 Get A/D filter: -9.255963e+061 result=40 10:39:02 Get A/D value=-858993460 result=40 10:39:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:02 Aux= 10:39:02 Message to Camera, serial 103209 queued 10:39:38 Received message from Master: op=PointingHead serial=103222 10:39:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:39:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:39:39 Point started: ret=0 10:39:39 point_skyscan result=0 10:39:40 Check angles 10:39:40 SkyScan query 10:39:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 10:39:40 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 10:39:40 Check angles 10:39:40 SkyScan query 10:39:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 10:39:41 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 10:39:41 Check angles 10:39:41 SkyScan query 10:39:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.82<-16388 Statuses=0008 0009 10:39:42 Msec=1500 True Az=112.995 Ze=-65.82 Az status=0008 Ze status=0009 10:39:42 Check angles 10:39:42 SkyScan query 10:39:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.775<-17785 Statuses=0008 0009 10:39:42 Msec=2250 True Az=112.995 Ze=-86.775 Az status=0008 Ze status=0009 10:39:43 Check angles 10:39:43 SkyScan query 10:39:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.225<-19215 Statuses=0008 0009 10:39:43 Msec=3000 True Az=112.995 Ze=-108.225 Az status=0008 Ze status=0009 10:39:43 Check angles 10:39:43 SkyScan query 10:39:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.15<-20610 Statuses=0008 0009 10:39:44 Msec=3750 True Az=112.995 Ze=-129.15 Az status=0008 Ze status=0009 10:39:44 Check angles 10:39:44 SkyScan query 10:39:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.105<-22007 Statuses=0008 0009 10:39:45 Msec=4500 True Az=112.995 Ze=-150.105 Az status=0008 Ze status=0009 10:39:45 Check angles 10:39:45 SkyScan query 10:39:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.255<-23417 Statuses=0008 0009 10:39:45 Msec=5250 True Az=112.995 Ze=-171.255 Az status=0008 Ze status=0009 10:39:46 Check angles 10:39:46 SkyScan query 10:39:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:39:46 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:39:46 Message to Master queued w/err=0: serial=103222 error=0 10:39:51 Received message from Master: op=Filter serial=103223 10:39:51 Color wheel filter change from 0 to 0 10:39:51 FLIGetFilterPos err=0 currentPosition=0 10:39:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:51 Filter is already there-color wheel unchanged 10:39:51 Received message from Master: op=Shutter serial=103224 10:39:51 Shutter LASER open 10:39:52 Received message from Camera: op=State serial=103226 10:39:52 GetSingleValue result=40 Value=cccccccc 10:39:52 SkyScan query 10:39:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:39:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:52 Parameters OK 10:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:52 Set A/D data flow result=40 10:39:52 Set A/D channel type result=40 10:39:52 Set A/D encoding result=40 10:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:52 Set channel filter=0.000000e+000 result=40 10:39:52 Config A/D Result=40 10:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:52 Get A/D filter: -9.255963e+061 result=40 10:39:52 Get A/D value=-858993460 result=40 10:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:52 Parameters OK 10:39:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:52 Set A/D data flow result=40 10:39:52 Set A/D channel type result=40 10:39:52 Set A/D encoding result=40 10:39:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:52 Set channel filter=0.000000e+000 result=40 10:39:52 Config A/D Result=40 10:39:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:52 Get A/D filter: -9.255963e+061 result=40 10:39:52 Get A/D value=-858993460 result=40 10:39:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:52 Aux= 10:39:52 Message to Camera, serial 103226 queued 10:40:01 Received message from Master: op=Shutter serial=103236 10:40:01 Shutter LASER close 10:40:01 Received message from Master: op=PointingHead serial=103240 10:40:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:40:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:40:02 Point started: ret=0 10:40:02 point_skyscan result=0 10:40:02 Check angles 10:40:02 SkyScan query 10:40:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 10:40:03 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 10:40:03 Check angles 10:40:03 SkyScan query 10:40:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.475<-20165 Statuses=0008 0009 10:40:04 Msec=750 True Az=112.995 Ze=-122.475 Az status=0008 Ze status=0009 10:40:04 Check angles 10:40:04 SkyScan query 10:40:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.505<-18767 Statuses=0008 0009 10:40:04 Msec=1500 True Az=112.995 Ze=-101.505 Az status=0008 Ze status=0009 10:40:05 Check angles 10:40:05 SkyScan query 10:40:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.535<-17369 Statuses=0008 0009 10:40:05 Msec=2250 True Az=112.995 Ze=-80.535 Az status=0008 Ze status=0009 10:40:05 Check angles 10:40:05 SkyScan query 10:40:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 10:40:06 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 10:40:06 Check angles 10:40:06 SkyScan query 10:40:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.71<-14514 Statuses=0008 0009 10:40:07 Msec=3750 True Az=112.995 Ze=-37.71 Az status=0008 Ze status=0009 10:40:07 Check angles 10:40:07 SkyScan query 10:40:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.35<-13090 Statuses=0008 0009 10:40:07 Msec=4500 True Az=112.995 Ze=-16.35 Az status=0008 Ze status=0009 10:40:08 Check angles 10:40:08 SkyScan query 10:40:08 SkyScan query done: ret=0 az=112.995<-7533 ze=4.47<-11702 Statuses=0008 0009 10:40:08 Msec=5250 True Az=112.995 Ze=4.47 Az status=0008 Ze status=0009 10:40:08 Check angles 10:40:08 SkyScan query 10:40:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:40:09 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:40:09 Message to Master queued w/err=0: serial=103240 error=0 10:40:14 Received message from Master: op=Filter serial=103241 10:40:14 Color wheel filter change from 0 to 0 10:40:14 FLIGetFilterPos err=0 currentPosition=0 10:40:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:40:14 Filter is already there-color wheel unchanged 10:40:14 Received message from Master: op=Shutter serial=103242 10:40:14 Shutter LASER close 10:40:14 Received message from Camera: op=State serial=103244 10:40:14 GetSingleValue result=40 Value=cccccccc 10:40:14 SkyScan query 10:40:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:40:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:15 Parameters OK 10:40:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:15 Set A/D data flow result=40 10:40:15 Set A/D channel type result=40 10:40:15 Set A/D encoding result=40 10:40:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:15 Set channel filter=0.000000e+000 result=40 10:40:15 Config A/D Result=40 10:40:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:15 Get A/D filter: -9.255963e+061 result=40 10:40:15 Get A/D value=-858993460 result=40 10:40:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:15 Parameters OK 10:40:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:15 Set A/D data flow result=40 10:40:15 Set A/D channel type result=40 10:40:15 Set A/D encoding result=40 10:40:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:15 Set channel filter=0.000000e+000 result=40 10:40:15 Config A/D Result=40 10:40:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:15 Get A/D filter: -9.255963e+061 result=40 10:40:15 Get A/D value=-858993460 result=40 10:40:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:40:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:40:15 Aux= 10:40:15 Message to Camera, serial 103244 queued 10:40:52 Received message from Master: op=PointingHead serial=103257 10:40:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:40:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:40:52 Point started: ret=0 10:40:52 point_skyscan result=0 10:40:53 Check angles 10:40:53 SkyScan query 10:40:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:40:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:40:53 Message to Master queued w/err=0: serial=103257 error=0 10:40:58 Received message from Master: op=Filter serial=103258 10:40:58 Color wheel filter change from 0 to 0 10:40:58 FLIGetFilterPos err=0 currentPosition=0 10:40:58 FLIGetStepsRemaining err=0 RemainingSteps=0 10:40:58 Filter is already there-color wheel unchanged 10:40:59 Received message from Master: op=Shutter serial=103259 10:40:59 Shutter LASER close 10:40:59 Received message from Camera: op=State serial=103261 10:40:59 GetSingleValue result=40 Value=cccccccc 10:40:59 SkyScan query 10:40:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:40:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:59 Parameters OK 10:40:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:59 Set A/D data flow result=40 10:40:59 Set A/D channel type result=40 10:40:59 Set A/D encoding result=40 10:40:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:59 Set channel filter=0.000000e+000 result=40 10:40:59 Config A/D Result=40 10:40:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:59 Get A/D filter: -9.255963e+061 result=40 10:40:59 Get A/D value=-858993460 result=40 10:40:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:59 Parameters OK 10:40:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:59 Set A/D data flow result=40 10:40:59 Set A/D channel type result=40 10:40:59 Set A/D encoding result=40 10:40:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:59 Set channel filter=0.000000e+000 result=40 10:40:59 Config A/D Result=40 10:40:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:59 Get A/D filter: -9.255963e+061 result=40 10:40:59 Get A/D value=-858993460 result=40 10:40:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:40:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:40:59 Aux= 10:40:59 Message to Camera, serial 103261 queued 10:41:36 Received message from Master: op=PointingHead serial=103274 10:41:36 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:41:36 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:41:36 Point started: ret=0 10:41:36 point_skyscan result=0 10:41:37 Check angles 10:41:37 SkyScan query 10:41:38 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 10:41:38 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 10:41:38 Check angles 10:41:38 SkyScan query 10:41:38 SkyScan query done: ret=0 az=153.495<-10233 ze=-6.495<-12433 Statuses=0009 0008 10:41:38 Msec=750 True Az=153.495 Ze=-6.495 Az status=0009 Ze status=0008 10:41:39 Check angles 10:41:39 SkyScan query 10:41:39 SkyScan query done: ret=0 az=171.375<-11425 ze=-6.495<-12433 Statuses=0009 0008 10:41:39 Msec=1500 True Az=171.375 Ze=-6.495 Az status=0009 Ze status=0008 10:41:39 Check angles 10:41:39 SkyScan query 10:41:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:41:40 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:41:40 Message to Master queued w/err=0: serial=103274 error=0 10:41:45 Received message from Master: op=Filter serial=103275 10:41:45 Color wheel filter change from 0 to 0 10:41:45 FLIGetFilterPos err=0 currentPosition=0 10:41:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:41:45 Filter is already there-color wheel unchanged 10:41:45 Received message from Master: op=Shutter serial=103276 10:41:45 Shutter LASER close 10:41:45 Received message from Camera: op=State serial=103278 10:41:45 GetSingleValue result=40 Value=cccccccc 10:41:45 SkyScan query 10:41:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:41:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:46 Parameters OK 10:41:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:46 Set A/D data flow result=40 10:41:46 Set A/D channel type result=40 10:41:46 Set A/D encoding result=40 10:41:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:46 Set channel filter=0.000000e+000 result=40 10:41:46 Config A/D Result=40 10:41:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:46 Get A/D filter: -9.255963e+061 result=40 10:41:46 Get A/D value=-858993460 result=40 10:41:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:46 Parameters OK 10:41:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:46 Set A/D data flow result=40 10:41:46 Set A/D channel type result=40 10:41:46 Set A/D encoding result=40 10:41:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:46 Set channel filter=0.000000e+000 result=40 10:41:46 Config A/D Result=40 10:41:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:46 Get A/D filter: -9.255963e+061 result=40 10:41:46 Get A/D value=-858993460 result=40 10:41:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:41:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:41:46 Aux= 10:41:46 Message to Camera, serial 103278 queued 10:42:23 Received message from Master: op=PointingHead serial=103291 10:42:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:42:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:42:23 Point started: ret=0 10:42:23 point_skyscan result=0 10:42:24 Check angles 10:42:24 SkyScan query 10:42:24 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 10:42:24 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 10:42:24 Check angles 10:42:24 SkyScan query 10:42:25 SkyScan query done: ret=0 az=135.675<-9045 ze=6.495<-11567 Statuses=0009 0008 10:42:25 Msec=750 True Az=135.675 Ze=6.495 Az status=0009 Ze status=0008 10:42:25 Check angles 10:42:25 SkyScan query 10:42:26 SkyScan query done: ret=0 az=118.185<-7879 ze=6.495<-11567 Statuses=0009 0008 10:42:26 Msec=1500 True Az=118.185 Ze=6.495 Az status=0009 Ze status=0008 10:42:26 Check angles 10:42:26 SkyScan query 10:42:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:42:26 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:42:26 Message to Master queued w/err=0: serial=103291 error=0 10:42:31 Received message from Master: op=Filter serial=103292 10:42:31 Color wheel filter change from 0 to 0 10:42:31 FLIGetFilterPos err=0 currentPosition=0 10:42:31 FLIGetStepsRemaining err=0 RemainingSteps=0 10:42:31 Filter is already there-color wheel unchanged 10:42:32 Received message from Master: op=Shutter serial=103293 10:42:32 Shutter LASER close 10:42:32 Received message from Camera: op=State serial=103295 10:42:32 GetSingleValue result=40 Value=cccccccc 10:42:32 SkyScan query 10:42:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:42:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:32 Parameters OK 10:42:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:32 Set A/D data flow result=40 10:42:32 Set A/D channel type result=40 10:42:32 Set A/D encoding result=40 10:42:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:32 Set channel filter=0.000000e+000 result=40 10:42:32 Config A/D Result=40 10:42:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:32 Get A/D filter: -9.255963e+061 result=40 10:42:32 Get A/D value=-858993460 result=40 10:42:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:32 Parameters OK 10:42:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:32 Set A/D data flow result=40 10:42:32 Set A/D channel type result=40 10:42:32 Set A/D encoding result=40 10:42:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:32 Set channel filter=0.000000e+000 result=40 10:42:32 Config A/D Result=40 10:42:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:32 Get A/D filter: -9.255963e+061 result=40 10:42:32 Get A/D value=-858993460 result=40 10:42:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:42:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:42:32 Aux= 10:42:32 Message to Camera, serial 103295 queued 10:43:08 Received message from Master: op=PointingHead serial=103307 10:43:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:43:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:43:08 Point started: ret=0 10:43:08 point_skyscan result=0 10:43:09 Check angles 10:43:09 SkyScan query 10:43:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.49<-13566 Statuses=0008 0009 10:43:10 Msec=0 True Az=112.995 Ze=-23.49 Az status=0008 Ze status=0009 10:43:10 Check angles 10:43:10 SkyScan query 10:43:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.43<-14962 Statuses=0008 0009 10:43:11 Msec=750 True Az=112.995 Ze=-44.43 Az status=0008 Ze status=0009 10:43:11 Check angles 10:43:11 SkyScan query 10:43:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 10:43:11 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 10:43:11 Check angles 10:43:11 SkyScan query 10:43:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 10:43:12 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 10:43:12 Check angles 10:43:12 SkyScan query 10:43:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.28<-19152 Statuses=0008 0009 10:43:13 Msec=3000 True Az=112.995 Ze=-107.28 Az status=0008 Ze status=0009 10:43:13 Check angles 10:43:13 SkyScan query 10:43:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.25<-20550 Statuses=0008 0009 10:43:14 Msec=3750 True Az=112.995 Ze=-128.25 Az status=0008 Ze status=0009 10:43:14 Check angles 10:43:14 SkyScan query 10:43:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.685<-21979 Statuses=0008 0009 10:43:14 Msec=4500 True Az=112.995 Ze=-149.685 Az status=0008 Ze status=0009 10:43:14 Check angles 10:43:14 SkyScan query 10:43:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.61<-23374 Statuses=0008 0009 10:43:15 Msec=5250 True Az=112.995 Ze=-170.61 Az status=0008 Ze status=0009 10:43:15 Check angles 10:43:15 SkyScan query 10:43:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:43:16 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:43:16 Message to Master queued w/err=0: serial=103307 error=0 10:43:21 Received message from Master: op=Filter serial=103308 10:43:21 Color wheel filter change from 0 to 0 10:43:21 FLIGetFilterPos err=0 currentPosition=0 10:43:21 FLIGetStepsRemaining err=0 RemainingSteps=0 10:43:21 Filter is already there-color wheel unchanged 10:43:21 Received message from Master: op=Shutter serial=103309 10:43:21 Shutter LASER open 10:43:21 Received message from Camera: op=State serial=103311 10:43:21 GetSingleValue result=40 Value=cccccccc 10:43:21 SkyScan query 10:43:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:43:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:22 Parameters OK 10:43:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:22 Set A/D data flow result=40 10:43:22 Set A/D channel type result=40 10:43:22 Set A/D encoding result=40 10:43:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:22 Set channel filter=0.000000e+000 result=40 10:43:22 Config A/D Result=40 10:43:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:22 Get A/D filter: -9.255963e+061 result=40 10:43:22 Get A/D value=-858993460 result=40 10:43:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:22 Parameters OK 10:43:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:22 Set A/D data flow result=40 10:43:22 Set A/D channel type result=40 10:43:22 Set A/D encoding result=40 10:43:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:22 Set channel filter=0.000000e+000 result=40 10:43:22 Config A/D Result=40 10:43:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:22 Get A/D filter: -9.255963e+061 result=40 10:43:22 Get A/D value=-858993460 result=40 10:43:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:43:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:43:22 Aux= 10:43:22 Message to Camera, serial 103311 queued 10:43:30 Received message from Master: op=Shutter serial=103321 10:43:30 Shutter LASER close 10:43:31 Received message from Master: op=PointingHead serial=103325 10:43:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:43:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:43:31 Point started: ret=0 10:43:31 point_skyscan result=0 10:43:32 Check angles 10:43:32 SkyScan query 10:43:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 10:43:32 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 10:43:32 Check angles 10:43:32 SkyScan query 10:43:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.65<-20110 Statuses=0008 0009 10:43:33 Msec=750 True Az=112.995 Ze=-121.65 Az status=0008 Ze status=0009 10:43:33 Check angles 10:43:33 SkyScan query 10:43:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.725<-18715 Statuses=0008 0009 10:43:34 Msec=1500 True Az=112.995 Ze=-100.725 Az status=0008 Ze status=0009 10:43:34 Check angles 10:43:34 SkyScan query 10:43:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.755<-17317 Statuses=0008 0009 10:43:35 Msec=2250 True Az=112.995 Ze=-79.755 Az status=0008 Ze status=0009 10:43:35 Check angles 10:43:35 SkyScan query 10:43:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.815<-15921 Statuses=0008 0009 10:43:35 Msec=3000 True Az=112.995 Ze=-58.815 Az status=0008 Ze status=0009 10:43:35 Check angles 10:43:35 SkyScan query 10:43:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.83<-14522 Statuses=0008 0009 10:43:36 Msec=3750 True Az=112.995 Ze=-37.83 Az status=0008 Ze status=0009 10:43:36 Check angles 10:43:36 SkyScan query 10:43:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.86<-13124 Statuses=0008 0009 10:43:37 Msec=4500 True Az=112.995 Ze=-16.86 Az status=0008 Ze status=0009 10:43:37 Check angles 10:43:37 SkyScan query 10:43:38 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 10:43:38 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 10:43:38 Check angles 10:43:38 SkyScan query 10:43:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:43:38 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:43:38 Message to Master queued w/err=0: serial=103325 error=0 10:43:43 Received message from Master: op=Filter serial=103326 10:43:43 Color wheel filter change from 0 to 0 10:43:43 FLIGetFilterPos err=0 currentPosition=0 10:43:43 FLIGetStepsRemaining err=0 RemainingSteps=0 10:43:43 Filter is already there-color wheel unchanged 10:43:43 Received message from Master: op=Shutter serial=103327 10:43:43 Shutter LASER close 10:43:44 Received message from Camera: op=State serial=103329 10:43:44 GetSingleValue result=40 Value=cccccccc 10:43:44 SkyScan query 10:43:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:43:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:44 Parameters OK 10:43:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:44 Set A/D data flow result=40 10:43:44 Set A/D channel type result=40 10:43:44 Set A/D encoding result=40 10:43:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:44 Set channel filter=0.000000e+000 result=40 10:43:44 Config A/D Result=40 10:43:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:44 Get A/D filter: -9.255963e+061 result=40 10:43:44 Get A/D value=-858993460 result=40 10:43:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:44 Parameters OK 10:43:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:44 Set A/D data flow result=40 10:43:44 Set A/D channel type result=40 10:43:44 Set A/D encoding result=40 10:43:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:44 Set channel filter=0.000000e+000 result=40 10:43:44 Config A/D Result=40 10:43:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:44 Get A/D filter: -9.255963e+061 result=40 10:43:44 Get A/D value=-858993460 result=40 10:43:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:43:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:43:44 Aux= 10:43:44 Message to Camera, serial 103329 queued [UTC 2019-3-4 10:43:50] 10:44:21 Received message from Master: op=PointingHead serial=103342 10:44:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:44:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:44:21 Point started: ret=0 10:44:21 point_skyscan result=0 10:44:22 Check angles 10:44:22 SkyScan query 10:44:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:44:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:44:23 Message to Master queued w/err=0: serial=103342 error=0 10:44:28 Received message from Master: op=Filter serial=103343 10:44:28 Color wheel filter change from 0 to 0 10:44:28 FLIGetFilterPos err=0 currentPosition=0 10:44:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:44:28 Filter is already there-color wheel unchanged 10:44:28 Received message from Master: op=Shutter serial=103344 10:44:28 Shutter LASER close 10:44:28 Received message from Camera: op=State serial=103346 10:44:28 GetSingleValue result=40 Value=cccccccc 10:44:28 SkyScan query 10:44:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:44:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:28 Parameters OK 10:44:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:28 Set A/D data flow result=40 10:44:28 Set A/D channel type result=40 10:44:28 Set A/D encoding result=40 10:44:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:28 Set channel filter=0.000000e+000 result=40 10:44:28 Config A/D Result=40 10:44:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:28 Get A/D filter: -9.255963e+061 result=40 10:44:28 Get A/D value=-858993460 result=40 10:44:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:28 Parameters OK 10:44:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:28 Set A/D data flow result=40 10:44:28 Set A/D channel type result=40 10:44:28 Set A/D encoding result=40 10:44:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:28 Set channel filter=0.000000e+000 result=40 10:44:28 Config A/D Result=40 10:44:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:28 Get A/D filter: -9.255963e+061 result=40 10:44:28 Get A/D value=-858993460 result=40 10:44:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:44:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:44:28 Aux= 10:44:28 Message to Camera, serial 103346 queued 10:45:05 Received message from Master: op=PointingHead serial=103359 10:45:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:45:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:45:06 Point started: ret=0 10:45:06 point_skyscan result=0 10:45:06 Check angles 10:45:06 SkyScan query 10:45:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:45:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:45:07 Message to Master queued w/err=0: serial=103359 error=0 10:45:12 Received message from Master: op=Filter serial=103360 10:45:12 Color wheel filter change from 0 to 0 10:45:12 FLIGetFilterPos err=0 currentPosition=0 10:45:12 FLIGetStepsRemaining err=0 RemainingSteps=0 10:45:12 Filter is already there-color wheel unchanged 10:45:12 Received message from Master: op=Shutter serial=103361 10:45:12 Shutter LASER close 10:45:12 Received message from Camera: op=State serial=103363 10:45:12 GetSingleValue result=40 Value=cccccccc 10:45:12 SkyScan query 10:45:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:45:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:13 Parameters OK 10:45:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:13 Set A/D data flow result=40 10:45:13 Set A/D channel type result=40 10:45:13 Set A/D encoding result=40 10:45:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:13 Set channel filter=0.000000e+000 result=40 10:45:13 Config A/D Result=40 10:45:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:13 Get A/D filter: -9.255963e+061 result=40 10:45:13 Get A/D value=-858993460 result=40 10:45:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:13 Parameters OK 10:45:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:13 Set A/D data flow result=40 10:45:13 Set A/D channel type result=40 10:45:13 Set A/D encoding result=40 10:45:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:13 Set channel filter=0.000000e+000 result=40 10:45:13 Config A/D Result=40 10:45:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:13 Get A/D filter: -9.255963e+061 result=40 10:45:13 Get A/D value=-858993460 result=40 10:45:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:45:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:45:13 Aux= 10:45:13 Message to Camera, serial 103363 queued 10:45:50 Received message from Master: op=PointingHead serial=103376 10:45:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:45:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:45:50 Point started: ret=0 10:45:50 point_skyscan result=0 10:45:51 Check angles 10:45:51 SkyScan query 10:45:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:45:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:45:51 Message to Master queued w/err=0: serial=103376 error=0 10:45:56 Received message from Master: op=Filter serial=103377 10:45:56 Color wheel filter change from 0 to 0 10:45:56 FLIGetFilterPos err=0 currentPosition=0 10:45:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:45:56 Filter is already there-color wheel unchanged 10:45:57 Received message from Master: op=Shutter serial=103378 10:45:57 Shutter LASER close 10:45:57 Received message from Camera: op=State serial=103380 10:45:57 GetSingleValue result=40 Value=cccccccc 10:45:57 SkyScan query 10:45:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:45:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:57 Parameters OK 10:45:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:57 Set A/D data flow result=40 10:45:57 Set A/D channel type result=40 10:45:57 Set A/D encoding result=40 10:45:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:57 Set channel filter=0.000000e+000 result=40 10:45:57 Config A/D Result=40 10:45:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:57 Get A/D filter: -9.255963e+061 result=40 10:45:57 Get A/D value=-858993460 result=40 10:45:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:57 Parameters OK 10:45:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:57 Set A/D data flow result=40 10:45:57 Set A/D channel type result=40 10:45:57 Set A/D encoding result=40 10:45:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:57 Set channel filter=0.000000e+000 result=40 10:45:57 Config A/D Result=40 10:45:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:57 Get A/D filter: -9.255963e+061 result=40 10:45:57 Get A/D value=-858993460 result=40 10:45:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:45:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:45:57 Aux= 10:45:57 Message to Camera, serial 103380 queued 10:46:34 Received message from Master: op=PointingHead serial=103393 10:46:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:46:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:46:34 Point started: ret=0 10:46:34 point_skyscan result=0 10:46:35 Check angles 10:46:35 SkyScan query 10:46:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.01<-13534 Statuses=0008 0009 10:46:36 Msec=0 True Az=112.995 Ze=-23.01 Az status=0008 Ze status=0009 10:46:36 Check angles 10:46:36 SkyScan query 10:46:36 SkyScan query done: ret=0 az=112.98<-7532 ze=-44.415<-14961 Statuses=0008 0009 10:46:36 Msec=750 True Az=112.98 Ze=-44.415 Az status=0008 Ze status=0009 10:46:37 Check angles 10:46:37 SkyScan query 10:46:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.76<-16384 Statuses=0008 0009 10:46:37 Msec=1500 True Az=112.995 Ze=-65.76 Az status=0008 Ze status=0009 10:46:37 Check angles 10:46:37 SkyScan query 10:46:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.715<-17781 Statuses=0008 0009 10:46:38 Msec=2250 True Az=112.995 Ze=-86.715 Az status=0008 Ze status=0009 10:46:38 Check angles 10:46:38 SkyScan query 10:46:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.67<-19178 Statuses=0008 0009 10:46:39 Msec=3000 True Az=112.995 Ze=-107.67 Az status=0008 Ze status=0009 10:46:39 Check angles 10:46:39 SkyScan query 10:46:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.61<-20574 Statuses=0008 0009 10:46:39 Msec=3750 True Az=112.995 Ze=-128.61 Az status=0008 Ze status=0009 10:46:40 Check angles 10:46:40 SkyScan query 10:46:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.625<-21975 Statuses=0008 0009 10:46:40 Msec=4500 True Az=112.995 Ze=-149.625 Az status=0008 Ze status=0009 10:46:40 Check angles 10:46:40 SkyScan query 10:46:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.55<-23370 Statuses=0008 0009 10:46:41 Msec=5250 True Az=112.995 Ze=-170.55 Az status=0008 Ze status=0009 10:46:41 Check angles 10:46:41 SkyScan query 10:46:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:46:42 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:46:42 Message to Master queued w/err=0: serial=103393 error=0 10:46:47 Received message from Master: op=Filter serial=103394 10:46:47 Color wheel filter change from 0 to 0 10:46:47 FLIGetFilterPos err=0 currentPosition=0 10:46:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:46:47 Filter is already there-color wheel unchanged 10:46:47 Received message from Master: op=Shutter serial=103395 10:46:47 Shutter LASER open 10:46:47 Received message from Camera: op=State serial=103397 10:46:47 GetSingleValue result=40 Value=cccccccc 10:46:47 SkyScan query 10:46:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:46:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:48 Parameters OK 10:46:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:48 Set A/D data flow result=40 10:46:48 Set A/D channel type result=40 10:46:48 Set A/D encoding result=40 10:46:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:48 Set channel filter=0.000000e+000 result=40 10:46:48 Config A/D Result=40 10:46:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:48 Get A/D filter: -9.255963e+061 result=40 10:46:48 Get A/D value=-858993460 result=40 10:46:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:48 Parameters OK 10:46:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:48 Set A/D data flow result=40 10:46:48 Set A/D channel type result=40 10:46:48 Set A/D encoding result=40 10:46:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:48 Set channel filter=0.000000e+000 result=40 10:46:48 Config A/D Result=40 10:46:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:48 Get A/D filter: -9.255963e+061 result=40 10:46:48 Get A/D value=-858993460 result=40 10:46:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:48 Aux= 10:46:48 Message to Camera, serial 103397 queued 10:46:56 Received message from Master: op=Shutter serial=103407 10:46:56 Shutter LASER close 10:46:57 Received message from Master: op=PointingHead serial=103411 10:46:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:46:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:46:57 Point started: ret=0 10:46:57 point_skyscan result=0 10:46:58 Check angles 10:46:58 SkyScan query 10:46:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.04<-21536 Statuses=0008 0009 10:46:58 Msec=0 True Az=112.995 Ze=-143.04 Az status=0008 Ze status=0009 10:46:58 Check angles 10:46:58 SkyScan query 10:46:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 10:46:59 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 10:46:59 Check angles 10:46:59 SkyScan query 10:47:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 10:47:00 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 10:47:00 Check angles 10:47:00 SkyScan query 10:47:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.16<-17344 Statuses=0008 0009 10:47:01 Msec=2250 True Az=112.995 Ze=-80.16 Az status=0008 Ze status=0009 10:47:01 Check angles 10:47:01 SkyScan query 10:47:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.22<-15948 Statuses=0008 0009 10:47:01 Msec=3000 True Az=112.995 Ze=-59.22 Az status=0008 Ze status=0009 10:47:01 Check angles 10:47:01 SkyScan query 10:47:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 10:47:02 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 10:47:02 Check angles 10:47:02 SkyScan query 10:47:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 10:47:03 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 10:47:03 Check angles 10:47:03 SkyScan query 10:47:04 SkyScan query done: ret=0 az=112.995<-7533 ze=3.705<-11753 Statuses=0008 0009 10:47:04 Msec=5250 True Az=112.995 Ze=3.705 Az status=0008 Ze status=0009 10:47:04 Check angles 10:47:04 SkyScan query 10:47:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:47:04 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:47:04 Message to Master queued w/err=0: serial=103411 error=0 10:47:09 Received message from Master: op=Filter serial=103412 10:47:09 Color wheel filter change from 0 to 0 10:47:09 FLIGetFilterPos err=0 currentPosition=0 10:47:09 FLIGetStepsRemaining err=0 RemainingSteps=0 10:47:09 Filter is already there-color wheel unchanged 10:47:09 Received message from Master: op=Shutter serial=103413 10:47:09 Shutter LASER close 10:47:10 Received message from Camera: op=State serial=103415 10:47:10 GetSingleValue result=40 Value=cccccccc 10:47:10 SkyScan query 10:47:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:47:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:10 Parameters OK 10:47:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:10 Set A/D data flow result=40 10:47:10 Set A/D channel type result=40 10:47:10 Set A/D encoding result=40 10:47:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:10 Set channel filter=0.000000e+000 result=40 10:47:10 Config A/D Result=40 10:47:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:10 Get A/D filter: -9.255963e+061 result=40 10:47:10 Get A/D value=-858993460 result=40 10:47:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:10 Parameters OK 10:47:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:10 Set A/D data flow result=40 10:47:10 Set A/D channel type result=40 10:47:10 Set A/D encoding result=40 10:47:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:10 Set channel filter=0.000000e+000 result=40 10:47:10 Config A/D Result=40 10:47:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:10 Get A/D filter: -9.255963e+061 result=40 10:47:10 Get A/D value=-858993460 result=40 10:47:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:47:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:47:10 Aux= 10:47:10 Message to Camera, serial 103415 queued 10:47:47 Received message from Master: op=PointingHead serial=103428 10:47:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:47:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:47:47 Point started: ret=0 10:47:47 point_skyscan result=0 10:47:48 Check angles 10:47:48 SkyScan query 10:47:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:47:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:47:49 Message to Master queued w/err=0: serial=103428 error=0 10:47:54 Received message from Master: op=Filter serial=103429 10:47:54 Color wheel filter change from 0 to 0 10:47:54 FLIGetFilterPos err=0 currentPosition=0 10:47:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:47:54 Filter is already there-color wheel unchanged 10:47:54 Received message from Master: op=Shutter serial=103430 10:47:54 Shutter LASER close 10:47:54 Received message from Camera: op=State serial=103432 10:47:54 GetSingleValue result=40 Value=cccccccc 10:47:54 SkyScan query 10:47:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:47:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:54 Parameters OK 10:47:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:54 Set A/D data flow result=40 10:47:54 Set A/D channel type result=40 10:47:54 Set A/D encoding result=40 10:47:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:54 Set channel filter=0.000000e+000 result=40 10:47:54 Config A/D Result=40 10:47:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:54 Get A/D filter: -9.255963e+061 result=40 10:47:54 Get A/D value=-858993460 result=40 10:47:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:54 Parameters OK 10:47:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:54 Set A/D data flow result=40 10:47:54 Set A/D channel type result=40 10:47:54 Set A/D encoding result=40 10:47:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:54 Set channel filter=0.000000e+000 result=40 10:47:54 Config A/D Result=40 10:47:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:54 Get A/D filter: -9.255963e+061 result=40 10:47:54 Get A/D value=-858993460 result=40 10:47:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:47:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:47:54 Aux= 10:47:54 Message to Camera, serial 103432 queued 10:48:31 Received message from Master: op=PointingHead serial=103445 10:48:31 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:48:31 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:48:32 Point started: ret=0 10:48:32 point_skyscan result=0 10:48:32 Check angles 10:48:32 SkyScan query 10:48:33 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 10:48:33 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 10:48:33 Check angles 10:48:33 SkyScan query 10:48:34 SkyScan query done: ret=0 az=153.705<-10247 ze=-6.495<-12433 Statuses=0009 0008 10:48:34 Msec=750 True Az=153.705 Ze=-6.495 Az status=0009 Ze status=0008 10:48:34 Check angles 10:48:34 SkyScan query 10:48:34 SkyScan query done: ret=0 az=171.135<-11409 ze=-6.495<-12433 Statuses=0009 0008 10:48:34 Msec=1500 True Az=171.135 Ze=-6.495 Az status=0009 Ze status=0008 10:48:35 Check angles 10:48:35 SkyScan query 10:48:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:48:35 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:48:35 Message to Master queued w/err=0: serial=103445 error=0 10:48:40 Received message from Master: op=Filter serial=103446 10:48:40 Color wheel filter change from 0 to 0 10:48:40 FLIGetFilterPos err=0 currentPosition=0 10:48:40 FLIGetStepsRemaining err=0 RemainingSteps=0 10:48:40 Filter is already there-color wheel unchanged 10:48:40 Received message from Master: op=Shutter serial=103447 10:48:40 Shutter LASER close 10:48:40 Received message from Camera: op=State serial=103449 10:48:40 GetSingleValue result=40 Value=cccccccc 10:48:40 SkyScan query 10:48:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:48:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:41 Parameters OK 10:48:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:41 Set A/D data flow result=40 10:48:41 Set A/D channel type result=40 10:48:41 Set A/D encoding result=40 10:48:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:41 Set channel filter=0.000000e+000 result=40 10:48:41 Config A/D Result=40 10:48:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:41 Get A/D filter: -9.255963e+061 result=40 10:48:41 Get A/D value=-858993460 result=40 10:48:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:41 Parameters OK 10:48:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:41 Set A/D data flow result=40 10:48:41 Set A/D channel type result=40 10:48:41 Set A/D encoding result=40 10:48:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:41 Set channel filter=0.000000e+000 result=40 10:48:41 Config A/D Result=40 10:48:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:41 Get A/D filter: -9.255963e+061 result=40 10:48:41 Get A/D value=-858993460 result=40 10:48:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:48:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:48:41 Aux= 10:48:41 Message to Camera, serial 103449 queued 10:49:18 Received message from Master: op=PointingHead serial=103462 10:49:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:49:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:49:18 Point started: ret=0 10:49:18 point_skyscan result=0 10:49:19 Check angles 10:49:19 SkyScan query 10:49:20 SkyScan query done: ret=0 az=153.24<-10216 ze=6.51<-11566 Statuses=0009 0008 10:49:20 Msec=0 True Az=153.24 Ze=6.51 Az status=0009 Ze status=0008 10:49:20 Check angles 10:49:20 SkyScan query 10:49:20 SkyScan query done: ret=0 az=135.72<-9048 ze=6.495<-11567 Statuses=0009 0008 10:49:20 Msec=750 True Az=135.72 Ze=6.495 Az status=0009 Ze status=0008 10:49:20 Check angles 10:49:20 SkyScan query 10:49:21 SkyScan query done: ret=0 az=118.245<-7883 ze=6.495<-11567 Statuses=0009 0008 10:49:21 Msec=1500 True Az=118.245 Ze=6.495 Az status=0009 Ze status=0008 10:49:21 Check angles 10:49:21 SkyScan query 10:49:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:49:22 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:49:22 Message to Master queued w/err=0: serial=103462 error=0 10:49:27 Received message from Master: op=Filter serial=103463 10:49:27 Color wheel filter change from 0 to 0 10:49:27 FLIGetFilterPos err=0 currentPosition=0 10:49:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:49:27 Filter is already there-color wheel unchanged 10:49:27 Received message from Master: op=Shutter serial=103464 10:49:27 Shutter LASER close 10:49:27 Received message from Camera: op=State serial=103466 10:49:27 GetSingleValue result=40 Value=cccccccc 10:49:27 SkyScan query 10:49:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:49:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:28 Parameters OK 10:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:28 Set A/D data flow result=40 10:49:28 Set A/D channel type result=40 10:49:28 Set A/D encoding result=40 10:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:28 Set channel filter=0.000000e+000 result=40 10:49:28 Config A/D Result=40 10:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:28 Get A/D filter: -9.255963e+061 result=40 10:49:28 Get A/D value=-858993460 result=40 10:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:28 Parameters OK 10:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:28 Set A/D data flow result=40 10:49:28 Set A/D channel type result=40 10:49:28 Set A/D encoding result=40 10:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:28 Set channel filter=0.000000e+000 result=40 10:49:28 Config A/D Result=40 10:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:28 Get A/D filter: -9.255963e+061 result=40 10:49:28 Get A/D value=-858993460 result=40 10:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:49:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:49:28 Aux= 10:49:28 Message to Camera, serial 103466 queued 10:50:03 Received message from Master: op=PointingHead serial=103478 10:50:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:50:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:50:04 Point started: ret=0 10:50:04 point_skyscan result=0 10:50:05 Check angles 10:50:05 SkyScan query 10:50:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 10:50:05 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 10:50:05 Check angles 10:50:05 SkyScan query 10:50:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.145<-14943 Statuses=0008 0009 10:50:06 Msec=750 True Az=112.995 Ze=-44.145 Az status=0008 Ze status=0009 10:50:06 Check angles 10:50:06 SkyScan query 10:50:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.07<-16338 Statuses=0008 0009 10:50:07 Msec=1500 True Az=112.995 Ze=-65.07 Az status=0008 Ze status=0009 10:50:07 Check angles 10:50:07 SkyScan query 10:50:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.43<-17762 Statuses=0008 0009 10:50:07 Msec=2250 True Az=112.995 Ze=-86.43 Az status=0008 Ze status=0009 10:50:08 Check angles 10:50:08 SkyScan query 10:50:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.385<-19159 Statuses=0008 0009 10:50:08 Msec=3000 True Az=112.995 Ze=-107.385 Az status=0008 Ze status=0009 10:50:08 Check angles 10:50:08 SkyScan query 10:50:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.34<-20556 Statuses=0008 0009 10:50:09 Msec=3750 True Az=112.995 Ze=-128.34 Az status=0008 Ze status=0009 10:50:09 Check angles 10:50:09 SkyScan query 10:50:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.34<-21956 Statuses=0008 0009 10:50:10 Msec=4500 True Az=112.995 Ze=-149.34 Az status=0008 Ze status=0009 10:50:10 Check angles 10:50:10 SkyScan query 10:50:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.685<-23379 Statuses=0008 0009 10:50:10 Msec=5250 True Az=112.995 Ze=-170.685 Az status=0008 Ze status=0009 10:50:11 Check angles 10:50:11 SkyScan query 10:50:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:50:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:50:11 Message to Master queued w/err=0: serial=103478 error=0 10:50:16 Received message from Master: op=Filter serial=103479 10:50:16 Color wheel filter change from 0 to 0 10:50:16 FLIGetFilterPos err=0 currentPosition=0 10:50:16 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:16 Filter is already there-color wheel unchanged 10:50:16 Received message from Master: op=Shutter serial=103480 10:50:16 Shutter LASER open 10:50:17 Received message from Camera: op=State serial=103482 10:50:17 GetSingleValue result=40 Value=cccccccc 10:50:17 SkyScan query 10:50:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:50:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:17 Parameters OK 10:50:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:17 Set A/D data flow result=40 10:50:17 Set A/D channel type result=40 10:50:17 Set A/D encoding result=40 10:50:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:17 Set channel filter=0.000000e+000 result=40 10:50:17 Config A/D Result=40 10:50:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:17 Get A/D filter: -9.255963e+061 result=40 10:50:17 Get A/D value=-858993460 result=40 10:50:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:17 Parameters OK 10:50:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:17 Set A/D data flow result=40 10:50:17 Set A/D channel type result=40 10:50:17 Set A/D encoding result=40 10:50:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:17 Set channel filter=0.000000e+000 result=40 10:50:17 Config A/D Result=40 10:50:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:17 Get A/D filter: -9.255963e+061 result=40 10:50:17 Get A/D value=-858993460 result=40 10:50:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:17 Aux= 10:50:17 Message to Camera, serial 103482 queued 10:50:26 Received message from Master: op=Shutter serial=103492 10:50:26 Shutter LASER close 10:50:26 Received message from Master: op=PointingHead serial=103496 10:50:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:50:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:50:26 Point started: ret=0 10:50:26 point_skyscan result=0 10:50:27 Check angles 10:50:27 SkyScan query 10:50:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 10:50:28 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 10:50:28 Check angles 10:50:28 SkyScan query 10:50:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.22<-20148 Statuses=0008 0009 10:50:28 Msec=750 True Az=112.995 Ze=-122.22 Az status=0008 Ze status=0009 10:50:29 Check angles 10:50:29 SkyScan query 10:50:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.295<-18753 Statuses=0008 0009 10:50:29 Msec=1500 True Az=112.995 Ze=-101.295 Az status=0008 Ze status=0009 10:50:29 Check angles 10:50:29 SkyScan query 10:50:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.31<-17354 Statuses=0008 0009 10:50:30 Msec=2250 True Az=112.995 Ze=-80.31 Az status=0008 Ze status=0009 10:50:30 Check angles 10:50:30 SkyScan query 10:50:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.355<-15957 Statuses=0008 0009 10:50:31 Msec=3000 True Az=112.995 Ze=-59.355 Az status=0008 Ze status=0009 10:50:31 Check angles 10:50:31 SkyScan query 10:50:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.37<-14558 Statuses=0008 0009 10:50:31 Msec=3750 True Az=112.995 Ze=-38.37 Az status=0008 Ze status=0009 10:50:32 Check angles 10:50:32 SkyScan query 10:50:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.43<-13162 Statuses=0008 0009 10:50:32 Msec=4500 True Az=112.995 Ze=-17.43 Az status=0008 Ze status=0009 10:50:32 Check angles 10:50:32 SkyScan query 10:50:33 SkyScan query done: ret=0 az=112.995<-7533 ze=3.57<-11762 Statuses=0008 0009 10:50:33 Msec=5250 True Az=112.995 Ze=3.57 Az status=0008 Ze status=0009 10:50:33 Check angles 10:50:33 SkyScan query 10:50:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:50:34 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:50:34 Message to Master queued w/err=0: serial=103496 error=0 10:50:39 Received message from Master: op=Filter serial=103497 10:50:39 Color wheel filter change from 0 to 0 10:50:39 FLIGetFilterPos err=0 currentPosition=0 10:50:39 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:39 Filter is already there-color wheel unchanged 10:50:39 Received message from Master: op=Shutter serial=103498 10:50:39 Shutter LASER close 10:50:39 Received message from Camera: op=State serial=103500 10:50:39 GetSingleValue result=40 Value=cccccccc 10:50:39 SkyScan query 10:50:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:50:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:40 Parameters OK 10:50:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:40 Set A/D data flow result=40 10:50:40 Set A/D channel type result=40 10:50:40 Set A/D encoding result=40 10:50:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:40 Set channel filter=0.000000e+000 result=40 10:50:40 Config A/D Result=40 10:50:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:40 Get A/D filter: -9.255963e+061 result=40 10:50:40 Get A/D value=-858993460 result=40 10:50:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:40 Parameters OK 10:50:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:40 Set A/D data flow result=40 10:50:40 Set A/D channel type result=40 10:50:40 Set A/D encoding result=40 10:50:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:40 Set channel filter=0.000000e+000 result=40 10:50:40 Config A/D Result=40 10:50:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:40 Get A/D filter: -9.255963e+061 result=40 10:50:40 Get A/D value=-858993460 result=40 10:50:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:40 Aux= 10:50:40 Message to Camera, serial 103500 queued 10:51:16 Received message from Master: op=PointingHead serial=103513 10:51:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:51:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:51:17 Point started: ret=0 10:51:17 point_skyscan result=0 10:51:18 Check angles 10:51:18 SkyScan query 10:51:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:51:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:51:18 Message to Master queued w/err=0: serial=103513 error=0 10:51:23 Received message from Master: op=Filter serial=103514 10:51:23 Color wheel filter change from 0 to 0 10:51:23 FLIGetFilterPos err=0 currentPosition=0 10:51:23 FLIGetStepsRemaining err=0 RemainingSteps=0 10:51:23 Filter is already there-color wheel unchanged 10:51:23 Received message from Master: op=Shutter serial=103515 10:51:23 Shutter LASER close 10:51:23 Received message from Camera: op=State serial=103517 10:51:23 GetSingleValue result=40 Value=cccccccc 10:51:23 SkyScan query 10:51:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:51:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:24 Parameters OK 10:51:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:24 Set A/D data flow result=40 10:51:24 Set A/D channel type result=40 10:51:24 Set A/D encoding result=40 10:51:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:24 Set channel filter=0.000000e+000 result=40 10:51:24 Config A/D Result=40 10:51:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:24 Get A/D filter: -9.255963e+061 result=40 10:51:24 Get A/D value=-858993460 result=40 10:51:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:24 Parameters OK 10:51:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:24 Set A/D data flow result=40 10:51:24 Set A/D channel type result=40 10:51:24 Set A/D encoding result=40 10:51:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:24 Set channel filter=0.000000e+000 result=40 10:51:24 Config A/D Result=40 10:51:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:24 Get A/D filter: -9.255963e+061 result=40 10:51:24 Get A/D value=-858993460 result=40 10:51:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:51:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:51:24 Aux= 10:51:24 Message to Camera, serial 103517 queued 10:52:01 Received message from Master: op=PointingHead serial=103530 10:52:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:52:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:52:01 Point started: ret=0 10:52:01 point_skyscan result=0 10:52:02 Check angles 10:52:02 SkyScan query 10:52:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:52:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:52:02 Message to Master queued w/err=0: serial=103530 error=0 10:52:07 Received message from Master: op=Filter serial=103531 10:52:07 Color wheel filter change from 0 to 0 10:52:07 FLIGetFilterPos err=0 currentPosition=0 10:52:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:52:07 Filter is already there-color wheel unchanged 10:52:08 Received message from Master: op=Shutter serial=103532 10:52:08 Shutter LASER close 10:52:08 Received message from Camera: op=State serial=103534 10:52:08 GetSingleValue result=40 Value=cccccccc 10:52:08 SkyScan query 10:52:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:52:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:08 Parameters OK 10:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:08 Set A/D data flow result=40 10:52:08 Set A/D channel type result=40 10:52:08 Set A/D encoding result=40 10:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:08 Set channel filter=0.000000e+000 result=40 10:52:08 Config A/D Result=40 10:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:08 Get A/D filter: -9.255963e+061 result=40 10:52:08 Get A/D value=-858993460 result=40 10:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:08 Parameters OK 10:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:08 Set A/D data flow result=40 10:52:08 Set A/D channel type result=40 10:52:08 Set A/D encoding result=40 10:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:08 Set channel filter=0.000000e+000 result=40 10:52:08 Config A/D Result=40 10:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:08 Get A/D filter: -9.255963e+061 result=40 10:52:08 Get A/D value=-858993460 result=40 10:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:52:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:52:08 Aux= 10:52:08 Message to Camera, serial 103534 queued 10:52:45 Received message from Master: op=PointingHead serial=103547 10:52:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:52:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:52:45 Point started: ret=0 10:52:45 point_skyscan result=0 10:52:46 Check angles 10:52:46 SkyScan query 10:52:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:52:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:52:47 Message to Master queued w/err=0: serial=103547 error=0 10:52:52 Received message from Master: op=Filter serial=103548 10:52:52 Color wheel filter change from 0 to 0 10:52:52 FLIGetFilterPos err=0 currentPosition=0 10:52:52 FLIGetStepsRemaining err=0 RemainingSteps=0 10:52:52 Filter is already there-color wheel unchanged 10:52:52 Received message from Master: op=Shutter serial=103549 10:52:52 Shutter LASER close 10:52:52 Received message from Camera: op=State serial=103551 10:52:52 GetSingleValue result=40 Value=cccccccc 10:52:52 SkyScan query 10:52:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:52:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:52 Parameters OK 10:52:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:52 Set A/D data flow result=40 10:52:52 Set A/D channel type result=40 10:52:52 Set A/D encoding result=40 10:52:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:52 Set channel filter=0.000000e+000 result=40 10:52:52 Config A/D Result=40 10:52:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:52 Get A/D filter: -9.255963e+061 result=40 10:52:52 Get A/D value=-858993460 result=40 10:52:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:52 Parameters OK 10:52:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:52 Set A/D data flow result=40 10:52:52 Set A/D channel type result=40 10:52:52 Set A/D encoding result=40 10:52:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:52 Set channel filter=0.000000e+000 result=40 10:52:52 Config A/D Result=40 10:52:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:52 Get A/D filter: -9.255963e+061 result=40 10:52:52 Get A/D value=-858993460 result=40 10:52:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:52:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:52:52 Aux= 10:52:52 Message to Camera, serial 103551 queued 10:53:29 Received message from Master: op=PointingHead serial=103564 10:53:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:53:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:53:30 Point started: ret=0 10:53:30 point_skyscan result=0 10:53:30 Check angles 10:53:30 SkyScan query 10:53:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.85<-13590 Statuses=0008 0009 10:53:31 Msec=0 True Az=112.995 Ze=-23.85 Az status=0008 Ze status=0009 10:53:31 Check angles 10:53:31 SkyScan query 10:53:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 10:53:32 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 10:53:32 Check angles 10:53:32 SkyScan query 10:53:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.195<-16413 Statuses=0008 0009 10:53:32 Msec=1500 True Az=112.995 Ze=-66.195 Az status=0008 Ze status=0009 10:53:33 Check angles 10:53:33 SkyScan query 10:53:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.165<-17811 Statuses=0008 0009 10:53:33 Msec=2250 True Az=112.995 Ze=-87.165 Az status=0008 Ze status=0009 10:53:33 Check angles 10:53:33 SkyScan query 10:53:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.12<-19208 Statuses=0008 0009 10:53:34 Msec=3000 True Az=112.995 Ze=-108.12 Az status=0008 Ze status=0009 10:53:34 Check angles 10:53:34 SkyScan query 10:53:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.06<-20604 Statuses=0008 0009 10:53:35 Msec=3750 True Az=112.995 Ze=-129.06 Az status=0008 Ze status=0009 10:53:35 Check angles 10:53:35 SkyScan query 10:53:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.435<-22029 Statuses=0008 0009 10:53:36 Msec=4500 True Az=112.995 Ze=-150.435 Az status=0008 Ze status=0009 10:53:36 Check angles 10:53:36 SkyScan query 10:53:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.21<-23414 Statuses=0008 0009 10:53:36 Msec=5250 True Az=112.995 Ze=-171.21 Az status=0008 Ze status=0009 10:53:36 Check angles 10:53:36 SkyScan query 10:53:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:53:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:53:37 Message to Master queued w/err=0: serial=103564 error=0 10:53:42 Received message from Master: op=Filter serial=103565 10:53:42 Color wheel filter change from 0 to 0 10:53:42 FLIGetFilterPos err=0 currentPosition=0 10:53:42 FLIGetStepsRemaining err=0 RemainingSteps=0 10:53:42 Filter is already there-color wheel unchanged 10:53:42 Received message from Master: op=Shutter serial=103566 10:53:42 Shutter LASER open 10:53:42 Received message from Camera: op=State serial=103568 10:53:42 GetSingleValue result=40 Value=cccccccc 10:53:42 SkyScan query 10:53:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:53:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:43 Parameters OK 10:53:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:43 Set A/D data flow result=40 10:53:43 Set A/D channel type result=40 10:53:43 Set A/D encoding result=40 10:53:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:43 Set channel filter=0.000000e+000 result=40 10:53:43 Config A/D Result=40 10:53:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:43 Get A/D filter: -9.255963e+061 result=40 10:53:43 Get A/D value=-858993460 result=40 10:53:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:43 Parameters OK 10:53:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:43 Set A/D data flow result=40 10:53:43 Set A/D channel type result=40 10:53:43 Set A/D encoding result=40 10:53:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:43 Set channel filter=0.000000e+000 result=40 10:53:43 Config A/D Result=40 10:53:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:43 Get A/D filter: -9.255963e+061 result=40 10:53:43 Get A/D value=-858993460 result=40 10:53:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:53:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:53:43 Aux= 10:53:43 Message to Camera, serial 103568 queued 10:53:51 Received message from Master: op=Shutter serial=103578 10:53:51 Shutter LASER close 10:53:52 Received message from Master: op=PointingHead serial=103582 10:53:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:53:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:53:52 Point started: ret=0 10:53:52 point_skyscan result=0 10:53:53 Check angles 10:53:53 SkyScan query 10:53:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.04<-21536 Statuses=0008 0009 10:53:54 Msec=0 True Az=112.995 Ze=-143.04 Az status=0008 Ze status=0009 10:53:54 Check angles 10:53:54 SkyScan query 10:53:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 10:53:54 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 10:53:55 Check angles 10:53:55 SkyScan query 10:53:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.665<-18711 Statuses=0008 0009 10:53:55 Msec=1500 True Az=112.995 Ze=-100.665 Az status=0008 Ze status=0009 10:53:55 Check angles 10:53:55 SkyScan query 10:53:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.71<-17314 Statuses=0008 0009 10:53:56 Msec=2250 True Az=112.995 Ze=-79.71 Az status=0008 Ze status=0009 10:53:56 Check angles 10:53:56 SkyScan query 10:53:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.77<-15918 Statuses=0008 0009 10:53:57 Msec=3000 True Az=112.995 Ze=-58.77 Az status=0008 Ze status=0009 10:53:57 Check angles 10:53:57 SkyScan query 10:53:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.395<-14493 Statuses=0008 0009 10:53:57 Msec=3750 True Az=112.995 Ze=-37.395 Az status=0008 Ze status=0009 10:53:58 Check angles 10:53:58 SkyScan query 10:53:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.425<-13095 Statuses=0008 0009 10:53:58 Msec=4500 True Az=112.995 Ze=-16.425 Az status=0008 Ze status=0009 10:53:58 Check angles 10:53:58 SkyScan query 10:53:59 SkyScan query done: ret=0 az=112.995<-7533 ze=4.41<-11706 Statuses=0008 0009 10:53:59 Msec=5250 True Az=112.995 Ze=4.41 Az status=0008 Ze status=0009 10:53:59 Check angles 10:53:59 SkyScan query 10:54:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:54:00 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:54:00 Message to Master queued w/err=0: serial=103582 error=0 10:54:05 Received message from Master: op=Filter serial=103583 10:54:05 Color wheel filter change from 0 to 0 10:54:05 FLIGetFilterPos err=0 currentPosition=0 10:54:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:54:05 Filter is already there-color wheel unchanged 10:54:05 Received message from Master: op=Shutter serial=103584 10:54:05 Shutter LASER close 10:54:05 Received message from Camera: op=State serial=103586 10:54:05 GetSingleValue result=40 Value=cccccccc 10:54:05 SkyScan query 10:54:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:54:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:06 Parameters OK 10:54:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:06 Set A/D data flow result=40 10:54:06 Set A/D channel type result=40 10:54:06 Set A/D encoding result=40 10:54:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:06 Set channel filter=0.000000e+000 result=40 10:54:06 Config A/D Result=40 10:54:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:06 Get A/D filter: -9.255963e+061 result=40 10:54:06 Get A/D value=-858993460 result=40 10:54:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:06 Parameters OK 10:54:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:06 Set A/D data flow result=40 10:54:06 Set A/D channel type result=40 10:54:06 Set A/D encoding result=40 10:54:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:06 Set channel filter=0.000000e+000 result=40 10:54:06 Config A/D Result=40 10:54:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:06 Get A/D filter: -9.255963e+061 result=40 10:54:06 Get A/D value=-858993460 result=40 10:54:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:54:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:54:06 Aux= 10:54:06 Message to Camera, serial 103586 queued 10:54:43 Received message from Master: op=PointingHead serial=103599 10:54:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:54:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:54:43 Point started: ret=0 10:54:43 point_skyscan result=0 10:54:44 Check angles 10:54:44 SkyScan query 10:54:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:54:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:54:44 Message to Master queued w/err=0: serial=103599 error=0 10:54:49 Received message from Master: op=Filter serial=103600 10:54:49 Color wheel filter change from 0 to 0 [UTC 2019-3-4 10:54:49] 10:54:49 FLIGetFilterPos err=0 currentPosition=0 10:54:49 FLIGetStepsRemaining err=0 RemainingSteps=0 10:54:49 Filter is already there-color wheel unchanged 10:54:49 Received message from Master: op=Shutter serial=103601 10:54:49 Shutter LASER close 10:54:49 Received message from Camera: op=State serial=103603 10:54:49 GetSingleValue result=40 Value=cccccccc 10:54:49 SkyScan query 10:54:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:54:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:50 Parameters OK 10:54:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:50 Set A/D data flow result=40 10:54:50 Set A/D channel type result=40 10:54:50 Set A/D encoding result=40 10:54:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:50 Set channel filter=0.000000e+000 result=40 10:54:50 Config A/D Result=40 10:54:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:50 Get A/D filter: -9.255963e+061 result=40 10:54:50 Get A/D value=-858993460 result=40 10:54:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:50 Parameters OK 10:54:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:50 Set A/D data flow result=40 10:54:50 Set A/D channel type result=40 10:54:50 Set A/D encoding result=40 10:54:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:50 Set channel filter=0.000000e+000 result=40 10:54:50 Config A/D Result=40 10:54:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:50 Get A/D filter: -9.255963e+061 result=40 10:54:50 Get A/D value=-858993460 result=40 10:54:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:54:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:54:50 Aux= 10:54:50 Message to Camera, serial 103603 queued 10:55:27 Received message from Master: op=PointingHead serial=103616 10:55:27 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:55:27 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:55:27 Point started: ret=0 10:55:27 point_skyscan result=0 10:55:28 Check angles 10:55:28 SkyScan query 10:55:29 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 10:55:29 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 10:55:29 Check angles 10:55:29 SkyScan query 10:55:29 SkyScan query done: ret=0 az=153.915<-10261 ze=-6.51<-12434 Statuses=0009 0008 10:55:29 Msec=750 True Az=153.915 Ze=-6.51 Az status=0009 Ze status=0008 10:55:29 Check angles 10:55:29 SkyScan query 10:55:30 SkyScan query done: ret=0 az=171.39<-11426 ze=-6.495<-12433 Statuses=0009 0008 10:55:30 Msec=1500 True Az=171.39 Ze=-6.495 Az status=0009 Ze status=0008 10:55:30 Check angles 10:55:30 SkyScan query 10:55:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:55:31 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 10:55:31 Message to Master queued w/err=0: serial=103616 error=0 10:55:36 Received message from Master: op=Filter serial=103617 10:55:36 Color wheel filter change from 0 to 0 10:55:36 FLIGetFilterPos err=0 currentPosition=0 10:55:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:55:36 Filter is already there-color wheel unchanged 10:55:36 Received message from Master: op=Shutter serial=103618 10:55:36 Shutter LASER close 10:55:36 Received message from Camera: op=State serial=103620 10:55:36 GetSingleValue result=40 Value=cccccccc 10:55:36 SkyScan query 10:55:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:55:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:37 Parameters OK 10:55:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:37 Set A/D data flow result=40 10:55:37 Set A/D channel type result=40 10:55:37 Set A/D encoding result=40 10:55:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:37 Set channel filter=0.000000e+000 result=40 10:55:37 Config A/D Result=40 10:55:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:37 Get A/D filter: -9.255963e+061 result=40 10:55:37 Get A/D value=-858993460 result=40 10:55:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:37 Parameters OK 10:55:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:37 Set A/D data flow result=40 10:55:37 Set A/D channel type result=40 10:55:37 Set A/D encoding result=40 10:55:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:37 Set channel filter=0.000000e+000 result=40 10:55:37 Config A/D Result=40 10:55:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:37 Get A/D filter: -9.255963e+061 result=40 10:55:37 Get A/D value=-858993460 result=40 10:55:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:55:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:55:37 Aux= 10:55:37 Message to Camera, serial 103620 queued 10:56:13 Received message from Master: op=PointingHead serial=103633 10:56:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:56:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:56:14 Point started: ret=0 10:56:14 point_skyscan result=0 10:56:15 Check angles 10:56:15 SkyScan query 10:56:15 SkyScan query done: ret=0 az=153.24<-10216 ze=6.51<-11566 Statuses=0009 0008 10:56:15 Msec=0 True Az=153.24 Ze=6.51 Az status=0009 Ze status=0008 10:56:15 Check angles 10:56:15 SkyScan query 10:56:16 SkyScan query done: ret=0 az=135.345<-9023 ze=6.495<-11567 Statuses=0009 0008 10:56:16 Msec=750 True Az=135.345 Ze=6.495 Az status=0009 Ze status=0008 10:56:16 Check angles 10:56:16 SkyScan query 10:56:17 SkyScan query done: ret=0 az=117.885<-7859 ze=6.495<-11567 Statuses=0009 0008 10:56:17 Msec=1500 True Az=117.885 Ze=6.495 Az status=0009 Ze status=0008 10:56:17 Check angles 10:56:17 SkyScan query 10:56:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:56:17 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:56:17 Message to Master queued w/err=0: serial=103633 error=0 10:56:22 Received message from Master: op=Filter serial=103634 10:56:22 Color wheel filter change from 0 to 0 10:56:22 FLIGetFilterPos err=0 currentPosition=0 10:56:22 FLIGetStepsRemaining err=0 RemainingSteps=0 10:56:22 Filter is already there-color wheel unchanged 10:56:23 Received message from Master: op=Shutter serial=103635 10:56:23 Shutter LASER close 10:56:23 Received message from Camera: op=State serial=103637 10:56:23 GetSingleValue result=40 Value=cccccccc 10:56:23 SkyScan query 10:56:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:56:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:23 Parameters OK 10:56:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:23 Set A/D data flow result=40 10:56:23 Set A/D channel type result=40 10:56:23 Set A/D encoding result=40 10:56:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:23 Set channel filter=0.000000e+000 result=40 10:56:23 Config A/D Result=40 10:56:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:23 Get A/D filter: -9.255963e+061 result=40 10:56:23 Get A/D value=-858993460 result=40 10:56:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:23 Parameters OK 10:56:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:23 Set A/D data flow result=40 10:56:23 Set A/D channel type result=40 10:56:23 Set A/D encoding result=40 10:56:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:23 Set channel filter=0.000000e+000 result=40 10:56:23 Config A/D Result=40 10:56:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:23 Get A/D filter: -9.255963e+061 result=40 10:56:23 Get A/D value=-858993460 result=40 10:56:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:56:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:56:23 Aux= 10:56:23 Message to Camera, serial 103637 queued 10:57:00 Received message from Master: op=PointingHead serial=103650 10:57:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:57:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:57:00 Point started: ret=0 10:57:00 point_skyscan result=0 10:57:01 Check angles 10:57:01 SkyScan query 10:57:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.64<-13576 Statuses=0008 0009 10:57:02 Msec=0 True Az=112.995 Ze=-23.64 Az status=0008 Ze status=0009 10:57:02 Check angles 10:57:02 SkyScan query 10:57:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-45<-15000 Statuses=0008 0009 10:57:02 Msec=750 True Az=112.995 Ze=-45 Az status=0008 Ze status=0009 10:57:03 Check angles 10:57:03 SkyScan query 10:57:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.985<-16399 Statuses=0008 0009 10:57:03 Msec=1500 True Az=112.995 Ze=-65.985 Az status=0008 Ze status=0009 10:57:03 Check angles 10:57:03 SkyScan query 10:57:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.955<-17797 Statuses=0008 0009 10:57:04 Msec=2250 True Az=112.995 Ze=-86.955 Az status=0008 Ze status=0009 10:57:04 Check angles 10:57:04 SkyScan query 10:57:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.36<-19224 Statuses=0008 0009 10:57:05 Msec=3000 True Az=112.995 Ze=-108.36 Az status=0008 Ze status=0009 10:57:05 Check angles 10:57:05 SkyScan query 10:57:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.315<-20621 Statuses=0008 0009 10:57:05 Msec=3750 True Az=112.995 Ze=-129.315 Az status=0008 Ze status=0009 10:57:06 Check angles 10:57:06 SkyScan query 10:57:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.24<-22016 Statuses=0008 0009 10:57:06 Msec=4500 True Az=112.995 Ze=-150.24 Az status=0008 Ze status=0009 10:57:06 Check angles 10:57:06 SkyScan query 10:57:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.045<-23403 Statuses=0008 0009 10:57:07 Msec=5250 True Az=112.995 Ze=-171.045 Az status=0008 Ze status=0009 10:57:07 Check angles 10:57:07 SkyScan query 10:57:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:57:08 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:57:08 Message to Master queued w/err=0: serial=103650 error=0 10:57:13 Received message from Master: op=Filter serial=103651 10:57:13 Color wheel filter change from 0 to 0 10:57:13 FLIGetFilterPos err=0 currentPosition=0 10:57:13 FLIGetStepsRemaining err=0 RemainingSteps=0 10:57:13 Filter is already there-color wheel unchanged 10:57:13 Received message from Master: op=Shutter serial=103652 10:57:13 Shutter LASER open 10:57:13 Received message from Camera: op=State serial=103654 10:57:13 GetSingleValue result=40 Value=cccccccc 10:57:13 SkyScan query 10:57:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:57:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:14 Parameters OK 10:57:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:14 Set A/D data flow result=40 10:57:14 Set A/D channel type result=40 10:57:14 Set A/D encoding result=40 10:57:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:14 Set channel filter=0.000000e+000 result=40 10:57:14 Config A/D Result=40 10:57:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:14 Get A/D filter: -9.255963e+061 result=40 10:57:14 Get A/D value=-858993460 result=40 10:57:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:14 Parameters OK 10:57:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:14 Set A/D data flow result=40 10:57:14 Set A/D channel type result=40 10:57:14 Set A/D encoding result=40 10:57:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:14 Set channel filter=0.000000e+000 result=40 10:57:14 Config A/D Result=40 10:57:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:14 Get A/D filter: -9.255963e+061 result=40 10:57:14 Get A/D value=-858993460 result=40 10:57:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:14 Aux= 10:57:14 Message to Camera, serial 103654 queued 10:57:22 Received message from Master: op=Shutter serial=103664 10:57:22 Shutter LASER close 10:57:22 Received message from Master: op=PointingHead serial=103668 10:57:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:57:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:57:23 Point started: ret=0 10:57:23 point_skyscan result=0 10:57:24 Check angles 10:57:24 SkyScan query 10:57:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.725<-21515 Statuses=0008 0009 10:57:24 Msec=0 True Az=112.995 Ze=-142.725 Az status=0008 Ze status=0009 10:57:24 Check angles 10:57:24 SkyScan query 10:57:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.29<-20086 Statuses=0008 0009 10:57:25 Msec=750 True Az=112.995 Ze=-121.29 Az status=0008 Ze status=0009 10:57:25 Check angles 10:57:25 SkyScan query 10:57:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.32<-18688 Statuses=0008 0009 10:57:26 Msec=1500 True Az=112.995 Ze=-100.32 Az status=0008 Ze status=0009 10:57:26 Check angles 10:57:26 SkyScan query 10:57:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.35<-17290 Statuses=0008 0009 10:57:26 Msec=2250 True Az=112.995 Ze=-79.35 Az status=0008 Ze status=0009 10:57:27 Check angles 10:57:27 SkyScan query 10:57:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.41<-15894 Statuses=0008 0009 10:57:27 Msec=3000 True Az=112.995 Ze=-58.41 Az status=0008 Ze status=0009 10:57:27 Check angles 10:57:27 SkyScan query 10:57:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.095<-14473 Statuses=0008 0009 10:57:28 Msec=3750 True Az=112.995 Ze=-37.095 Az status=0008 Ze status=0009 10:57:28 Check angles 10:57:28 SkyScan query 10:57:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.11<-13074 Statuses=0008 0009 10:57:29 Msec=4500 True Az=112.995 Ze=-16.11 Az status=0008 Ze status=0009 10:57:29 Check angles 10:57:29 SkyScan query 10:57:29 SkyScan query done: ret=0 az=112.995<-7533 ze=4.665<-11689 Statuses=0008 0009 10:57:29 Msec=5250 True Az=112.995 Ze=4.665 Az status=0008 Ze status=0009 10:57:30 Check angles 10:57:30 SkyScan query 10:57:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:57:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:57:30 Message to Master queued w/err=0: serial=103668 error=0 10:57:35 Received message from Master: op=Filter serial=103669 10:57:35 Color wheel filter change from 0 to 0 10:57:35 FLIGetFilterPos err=0 currentPosition=0 10:57:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:57:35 Filter is already there-color wheel unchanged 10:57:35 Received message from Master: op=Shutter serial=103670 10:57:35 Shutter LASER close 10:57:36 Received message from Camera: op=State serial=103672 10:57:36 GetSingleValue result=40 Value=cccccccc 10:57:36 SkyScan query 10:57:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:57:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:36 Parameters OK 10:57:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:36 Set A/D data flow result=40 10:57:36 Set A/D channel type result=40 10:57:36 Set A/D encoding result=40 10:57:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:36 Set channel filter=0.000000e+000 result=40 10:57:36 Config A/D Result=40 10:57:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:36 Get A/D filter: -9.255963e+061 result=40 10:57:36 Get A/D value=-858993460 result=40 10:57:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:36 Parameters OK 10:57:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:36 Set A/D data flow result=40 10:57:36 Set A/D channel type result=40 10:57:36 Set A/D encoding result=40 10:57:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:36 Set channel filter=0.000000e+000 result=40 10:57:36 Config A/D Result=40 10:57:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:36 Get A/D filter: -9.255963e+061 result=40 10:57:36 Get A/D value=-858993460 result=40 10:57:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:36 Aux= 10:57:36 Message to Camera, serial 103672 queued 10:58:13 Received message from Master: op=PointingHead serial=103685 10:58:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:58:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:58:13 Point started: ret=0 10:58:13 point_skyscan result=0 10:58:14 Check angles 10:58:14 SkyScan query 10:58:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:58:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:58:15 Message to Master queued w/err=0: serial=103685 error=0 10:58:20 Received message from Master: op=Filter serial=103686 10:58:20 Color wheel filter change from 0 to 0 10:58:20 FLIGetFilterPos err=0 currentPosition=0 10:58:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:58:20 Filter is already there-color wheel unchanged 10:58:20 Received message from Master: op=Shutter serial=103687 10:58:20 Shutter LASER close 10:58:20 Received message from Camera: op=State serial=103689 10:58:20 GetSingleValue result=40 Value=cccccccc 10:58:20 SkyScan query 10:58:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:58:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:20 Parameters OK 10:58:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:20 Set A/D data flow result=40 10:58:20 Set A/D channel type result=40 10:58:20 Set A/D encoding result=40 10:58:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:20 Set channel filter=0.000000e+000 result=40 10:58:20 Config A/D Result=40 10:58:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:20 Get A/D filter: -9.255963e+061 result=40 10:58:20 Get A/D value=-858993460 result=40 10:58:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:20 Parameters OK 10:58:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:20 Set A/D data flow result=40 10:58:20 Set A/D channel type result=40 10:58:20 Set A/D encoding result=40 10:58:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:20 Set channel filter=0.000000e+000 result=40 10:58:20 Config A/D Result=40 10:58:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:20 Get A/D filter: -9.255963e+061 result=40 10:58:20 Get A/D value=-858993460 result=40 10:58:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:58:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:58:20 Aux= 10:58:20 Message to Camera, serial 103689 queued 10:58:57 Received message from Master: op=PointingHead serial=103702 10:58:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:58:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:58:58 Point started: ret=0 10:58:58 point_skyscan result=0 10:58:58 Check angles 10:58:58 SkyScan query 10:58:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:58:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:58:59 Message to Master queued w/err=0: serial=103702 error=0 10:59:04 Received message from Master: op=Filter serial=103703 10:59:04 Color wheel filter change from 0 to 0 10:59:04 FLIGetFilterPos err=0 currentPosition=0 10:59:04 FLIGetStepsRemaining err=0 RemainingSteps=0 10:59:04 Filter is already there-color wheel unchanged 10:59:04 Received message from Master: op=Shutter serial=103704 10:59:04 Shutter LASER close 10:59:04 Received message from Camera: op=State serial=103706 10:59:04 GetSingleValue result=40 Value=cccccccc 10:59:04 SkyScan query 10:59:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:59:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:05 Parameters OK 10:59:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:05 Set A/D data flow result=40 10:59:05 Set A/D channel type result=40 10:59:05 Set A/D encoding result=40 10:59:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:05 Set channel filter=0.000000e+000 result=40 10:59:05 Config A/D Result=40 10:59:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:05 Get A/D filter: -9.255963e+061 result=40 10:59:05 Get A/D value=-858993460 result=40 10:59:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:05 Parameters OK 10:59:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:05 Set A/D data flow result=40 10:59:05 Set A/D channel type result=40 10:59:05 Set A/D encoding result=40 10:59:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:05 Set channel filter=0.000000e+000 result=40 10:59:05 Config A/D Result=40 10:59:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:05 Get A/D filter: -9.255963e+061 result=40 10:59:05 Get A/D value=-858993460 result=40 10:59:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:05 Aux= 10:59:05 Message to Camera, serial 103706 queued 10:59:42 Received message from Master: op=PointingHead serial=103719 10:59:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:59:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:59:42 Point started: ret=0 10:59:42 point_skyscan result=0 10:59:43 Check angles 10:59:43 SkyScan query 10:59:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:59:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:59:43 Message to Master queued w/err=0: serial=103719 error=0 10:59:48 Received message from Master: op=Filter serial=103720 10:59:48 Color wheel filter change from 0 to 0 10:59:48 FLIGetFilterPos err=0 currentPosition=0 10:59:48 FLIGetStepsRemaining err=0 RemainingSteps=0 10:59:48 Filter is already there-color wheel unchanged 10:59:49 Received message from Master: op=Shutter serial=103721 10:59:49 Shutter LASER close 10:59:49 Received message from Camera: op=State serial=103723 10:59:49 GetSingleValue result=40 Value=cccccccc 10:59:49 SkyScan query 10:59:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:59:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:49 Parameters OK 10:59:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:49 Set A/D data flow result=40 10:59:49 Set A/D channel type result=40 10:59:49 Set A/D encoding result=40 10:59:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:49 Set channel filter=0.000000e+000 result=40 10:59:49 Config A/D Result=40 10:59:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:49 Get A/D filter: -9.255963e+061 result=40 10:59:49 Get A/D value=-858993460 result=40 10:59:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:49 Parameters OK 10:59:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:49 Set A/D data flow result=40 10:59:49 Set A/D channel type result=40 10:59:49 Set A/D encoding result=40 10:59:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:49 Set channel filter=0.000000e+000 result=40 10:59:49 Config A/D Result=40 10:59:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:49 Get A/D filter: -9.255963e+061 result=40 10:59:49 Get A/D value=-858993460 result=40 10:59:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:49 Aux= 10:59:49 Message to Camera, serial 103723 queued 11:00:26 Received message from Master: op=PointingHead serial=103736 11:00:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:00:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:00:26 Point started: ret=0 11:00:26 point_skyscan result=0 11:00:27 Check angles 11:00:27 SkyScan query 11:00:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.565<-13571 Statuses=0008 0009 11:00:28 Msec=0 True Az=112.995 Ze=-23.565 Az status=0008 Ze status=0009 11:00:28 Check angles 11:00:28 SkyScan query 11:00:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.505<-14967 Statuses=0008 0009 11:00:28 Msec=750 True Az=112.995 Ze=-44.505 Az status=0008 Ze status=0009 11:00:29 Check angles 11:00:29 SkyScan query 11:00:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.445<-16363 Statuses=0008 0009 11:00:29 Msec=1500 True Az=112.995 Ze=-65.445 Az status=0008 Ze status=0009 11:00:29 Check angles 11:00:29 SkyScan query 11:00:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 11:00:30 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 11:00:30 Check angles 11:00:30 SkyScan query 11:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.355<-19157 Statuses=0008 0009 11:00:31 Msec=3000 True Az=112.995 Ze=-107.355 Az status=0008 Ze status=0009 11:00:31 Check angles 11:00:31 SkyScan query 11:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.31<-20554 Statuses=0008 0009 11:00:31 Msec=3750 True Az=112.995 Ze=-128.31 Az status=0008 Ze status=0009 11:00:32 Check angles 11:00:32 SkyScan query 11:00:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.295<-21953 Statuses=0008 0009 11:00:32 Msec=4500 True Az=112.995 Ze=-149.295 Az status=0008 Ze status=0009 11:00:32 Check angles 11:00:32 SkyScan query 11:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.235<-23349 Statuses=0008 0009 11:00:33 Msec=5250 True Az=112.995 Ze=-170.235 Az status=0008 Ze status=0009 11:00:33 Check angles 11:00:33 SkyScan query 11:00:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:00:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:00:34 Message to Master queued w/err=0: serial=103736 error=0 11:00:39 Received message from Master: op=Filter serial=103737 11:00:39 Color wheel filter change from 0 to 0 11:00:39 FLIGetFilterPos err=0 currentPosition=0 11:00:39 FLIGetStepsRemaining err=0 RemainingSteps=0 11:00:39 Filter is already there-color wheel unchanged 11:00:39 Received message from Master: op=Shutter serial=103738 11:00:39 Shutter LASER open 11:00:39 Received message from Camera: op=State serial=103740 11:00:39 GetSingleValue result=40 Value=cccccccc 11:00:39 SkyScan query 11:00:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:00:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:40 Parameters OK 11:00:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:40 Set A/D data flow result=40 11:00:40 Set A/D channel type result=40 11:00:40 Set A/D encoding result=40 11:00:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:40 Set channel filter=0.000000e+000 result=40 11:00:40 Config A/D Result=40 11:00:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:40 Get A/D filter: -9.255963e+061 result=40 11:00:40 Get A/D value=-858993460 result=40 11:00:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:40 Parameters OK 11:00:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:40 Set A/D data flow result=40 11:00:40 Set A/D channel type result=40 11:00:40 Set A/D encoding result=40 11:00:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:40 Set channel filter=0.000000e+000 result=40 11:00:40 Config A/D Result=40 11:00:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:40 Get A/D filter: -9.255963e+061 result=40 11:00:40 Get A/D value=-858993460 result=40 11:00:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:00:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:00:40 Aux= 11:00:40 Message to Camera, serial 103740 queued 11:00:48 Received message from Master: op=Shutter serial=103750 11:00:48 Shutter LASER close 11:00:49 Received message from Master: op=PointingHead serial=103754 11:00:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:00:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:00:49 Point started: ret=0 11:00:49 point_skyscan result=0 11:00:50 Check angles 11:00:50 SkyScan query 11:00:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.695<-21513 Statuses=0008 0009 11:00:50 Msec=0 True Az=112.995 Ze=-142.695 Az status=0008 Ze status=0009 11:00:50 Check angles 11:00:50 SkyScan query 11:00:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.695<-20113 Statuses=0008 0009 11:00:51 Msec=750 True Az=112.995 Ze=-121.695 Az status=0008 Ze status=0009 11:00:51 Check angles 11:00:51 SkyScan query 11:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.785<-18719 Statuses=0008 0009 11:00:52 Msec=1500 True Az=112.995 Ze=-100.785 Az status=0008 Ze status=0009 11:00:52 Check angles 11:00:52 SkyScan query 11:00:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.785<-17319 Statuses=0008 0009 11:00:53 Msec=2250 True Az=112.995 Ze=-79.785 Az status=0008 Ze status=0009 11:00:53 Check angles 11:00:53 SkyScan query 11:00:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.875<-15925 Statuses=0008 0009 11:00:53 Msec=3000 True Az=112.995 Ze=-58.875 Az status=0008 Ze status=0009 11:00:53 Check angles 11:00:53 SkyScan query 11:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.86<-14524 Statuses=0008 0009 11:00:54 Msec=3750 True Az=112.995 Ze=-37.86 Az status=0008 Ze status=0009 11:00:54 Check angles 11:00:54 SkyScan query 11:00:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.92<-13128 Statuses=0008 0009 11:00:55 Msec=4500 True Az=112.995 Ze=-16.92 Az status=0008 Ze status=0009 11:00:55 Check angles 11:00:55 SkyScan query 11:00:56 SkyScan query done: ret=0 az=112.995<-7533 ze=4.02<-11732 Statuses=0008 0009 11:00:56 Msec=5250 True Az=112.995 Ze=4.02 Az status=0008 Ze status=0009 11:00:56 Check angles 11:00:56 SkyScan query 11:00:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:00:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:00:56 Message to Master queued w/err=0: serial=103754 error=0 11:01:01 Received message from Master: op=Filter serial=103755 11:01:01 Color wheel filter change from 0 to 0 11:01:01 FLIGetFilterPos err=0 currentPosition=0 11:01:01 FLIGetStepsRemaining err=0 RemainingSteps=0 11:01:01 Filter is already there-color wheel unchanged 11:01:01 Received message from Master: op=Shutter serial=103756 11:01:01 Shutter LASER close 11:01:02 Received message from Camera: op=State serial=103758 11:01:02 GetSingleValue result=40 Value=cccccccc 11:01:02 SkyScan query 11:01:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:01:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:02 Parameters OK 11:01:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:02 Set A/D data flow result=40 11:01:02 Set A/D channel type result=40 11:01:02 Set A/D encoding result=40 11:01:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:02 Set channel filter=0.000000e+000 result=40 11:01:02 Config A/D Result=40 11:01:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:02 Get A/D filter: -9.255963e+061 result=40 11:01:02 Get A/D value=-858993460 result=40 11:01:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:02 Parameters OK 11:01:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:02 Set A/D data flow result=40 11:01:02 Set A/D channel type result=40 11:01:02 Set A/D encoding result=40 11:01:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:02 Set channel filter=0.000000e+000 result=40 11:01:02 Config A/D Result=40 11:01:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:02 Get A/D filter: -9.255963e+061 result=40 11:01:02 Get A/D value=-858993460 result=40 11:01:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:01:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:01:02 Aux= 11:01:02 Message to Camera, serial 103758 queued 11:01:39 Received message from Master: op=PointingHead serial=103771 11:01:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:01:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:01:39 Point started: ret=0 11:01:39 point_skyscan result=0 11:01:40 Check angles 11:01:40 SkyScan query 11:01:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:01:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:01:41 Message to Master queued w/err=0: serial=103771 error=0 11:01:46 Received message from Master: op=Filter serial=103772 11:01:46 Color wheel filter change from 0 to 0 11:01:46 FLIGetFilterPos err=0 currentPosition=0 11:01:46 FLIGetStepsRemaining err=0 RemainingSteps=0 11:01:46 Filter is already there-color wheel unchanged 11:01:46 Received message from Master: op=Shutter serial=103773 11:01:46 Shutter LASER close 11:01:46 Received message from Camera: op=State serial=103775 11:01:46 GetSingleValue result=40 Value=cccccccc 11:01:46 SkyScan query 11:01:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:01:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:46 Parameters OK 11:01:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:46 Set A/D data flow result=40 11:01:46 Set A/D channel type result=40 11:01:46 Set A/D encoding result=40 11:01:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:46 Set channel filter=0.000000e+000 result=40 11:01:46 Config A/D Result=40 11:01:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:46 Get A/D filter: -9.255963e+061 result=40 11:01:46 Get A/D value=-858993460 result=40 11:01:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:46 Parameters OK 11:01:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:46 Set A/D data flow result=40 11:01:46 Set A/D channel type result=40 11:01:46 Set A/D encoding result=40 11:01:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:46 Set channel filter=0.000000e+000 result=40 11:01:46 Config A/D Result=40 11:01:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:46 Get A/D filter: -9.255963e+061 result=40 11:01:46 Get A/D value=-858993460 result=40 11:01:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:01:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:01:46 Aux= 11:01:46 Message to Camera, serial 103775 queued 11:02:23 Received message from Master: op=PointingHead serial=103788 11:02:23 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:02:23 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:02:24 Point started: ret=0 11:02:24 point_skyscan result=0 11:02:24 Check angles 11:02:24 SkyScan query 11:02:25 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 11:02:25 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 11:02:25 Check angles 11:02:25 SkyScan query 11:02:26 SkyScan query done: ret=0 az=153.915<-10261 ze=-6.495<-12433 Statuses=0009 0008 11:02:26 Msec=750 True Az=153.915 Ze=-6.495 Az status=0009 Ze status=0008 11:02:26 Check angles 11:02:26 SkyScan query 11:02:27 SkyScan query done: ret=0 az=171.36<-11424 ze=-6.495<-12433 Statuses=0009 0008 11:02:27 Msec=1500 True Az=171.36 Ze=-6.495 Az status=0009 Ze status=0008 11:02:27 Check angles 11:02:27 SkyScan query 11:02:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:02:27 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:02:27 Message to Master queued w/err=0: serial=103788 error=0 11:02:32 Received message from Master: op=Filter serial=103789 11:02:32 Color wheel filter change from 0 to 0 11:02:32 FLIGetFilterPos err=0 currentPosition=0 11:02:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:02:32 Filter is already there-color wheel unchanged 11:02:32 Received message from Master: op=Shutter serial=103790 11:02:32 Shutter LASER close 11:02:32 Received message from Camera: op=State serial=103792 11:02:32 GetSingleValue result=40 Value=cccccccc 11:02:32 SkyScan query 11:02:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:02:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:33 Parameters OK 11:02:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:33 Set A/D data flow result=40 11:02:33 Set A/D channel type result=40 11:02:33 Set A/D encoding result=40 11:02:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:33 Set channel filter=0.000000e+000 result=40 11:02:33 Config A/D Result=40 11:02:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:33 Get A/D filter: -9.255963e+061 result=40 11:02:33 Get A/D value=-858993460 result=40 11:02:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:33 Parameters OK 11:02:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:33 Set A/D data flow result=40 11:02:33 Set A/D channel type result=40 11:02:33 Set A/D encoding result=40 11:02:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:33 Set channel filter=0.000000e+000 result=40 11:02:33 Config A/D Result=40 11:02:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:33 Get A/D filter: -9.255963e+061 result=40 11:02:33 Get A/D value=-858993460 result=40 11:02:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:02:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:02:33 Aux= 11:02:33 Message to Camera, serial 103792 queued 11:03:10 Received message from Master: op=PointingHead serial=103805 11:03:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:03:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:03:10 Point started: ret=0 11:03:10 point_skyscan result=0 11:03:11 Check angles 11:03:11 SkyScan query 11:03:12 SkyScan query done: ret=0 az=153.225<-10215 ze=6.51<-11566 Statuses=0009 0008 11:03:12 Msec=0 True Az=153.225 Ze=6.51 Az status=0009 Ze status=0008 11:03:12 Check angles 11:03:12 SkyScan query 11:03:12 SkyScan query done: ret=0 az=135.735<-9049 ze=6.495<-11567 Statuses=0009 0008 11:03:12 Msec=750 True Az=135.735 Ze=6.495 Az status=0009 Ze status=0008 11:03:12 Check angles 11:03:12 SkyScan query 11:03:13 SkyScan query done: ret=0 az=118.335<-7889 ze=6.495<-11567 Statuses=0009 0008 11:03:13 Msec=1500 True Az=118.335 Ze=6.495 Az status=0009 Ze status=0008 11:03:13 Check angles 11:03:13 SkyScan query 11:03:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:03:14 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:03:14 Message to Master queued w/err=0: serial=103805 error=0 11:03:19 Received message from Master: op=Filter serial=103806 11:03:19 Color wheel filter change from 0 to 0 11:03:19 FLIGetFilterPos err=0 currentPosition=0 11:03:19 FLIGetStepsRemaining err=0 RemainingSteps=0 11:03:19 Filter is already there-color wheel unchanged 11:03:19 Received message from Master: op=Shutter serial=103807 11:03:19 Shutter LASER close 11:03:19 Received message from Camera: op=State serial=103809 11:03:19 GetSingleValue result=40 Value=cccccccc 11:03:19 SkyScan query 11:03:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:03:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:20 Parameters OK 11:03:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:20 Set A/D data flow result=40 11:03:20 Set A/D channel type result=40 11:03:20 Set A/D encoding result=40 11:03:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:20 Set channel filter=0.000000e+000 result=40 11:03:20 Config A/D Result=40 11:03:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:20 Get A/D filter: -9.255963e+061 result=40 11:03:20 Get A/D value=-858993460 result=40 11:03:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:20 Parameters OK 11:03:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:20 Set A/D data flow result=40 11:03:20 Set A/D channel type result=40 11:03:20 Set A/D encoding result=40 11:03:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:20 Set channel filter=0.000000e+000 result=40 11:03:20 Config A/D Result=40 11:03:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:20 Get A/D filter: -9.255963e+061 result=40 11:03:20 Get A/D value=-858993460 result=40 11:03:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:03:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:03:20 Aux= 11:03:20 Message to Camera, serial 103809 queued 11:03:38 Received message from Master: op=Identify serial=103810 [UTC 2019-3-4 11:03:50] 11:03:57 Received message from Master: op=PointingHead serial=103825 11:03:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:03:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:03:57 Point started: ret=0 11:03:57 point_skyscan result=0 11:03:58 Check angles 11:03:58 SkyScan query 11:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.49<-13566 Statuses=0008 0009 11:03:58 Msec=0 True Az=112.995 Ze=-23.49 Az status=0008 Ze status=0009 11:03:58 Check angles 11:03:58 SkyScan query 11:03:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 11:03:59 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 11:03:59 Check angles 11:03:59 SkyScan query 11:04:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 11:04:00 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 11:04:00 Check angles 11:04:00 SkyScan query 11:04:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 11:04:00 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 11:04:01 Check angles 11:04:01 SkyScan query 11:04:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.295<-19153 Statuses=0008 0009 11:04:01 Msec=3000 True Az=112.995 Ze=-107.295 Az status=0008 Ze status=0009 11:04:01 Check angles 11:04:01 SkyScan query 11:04:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.25<-20550 Statuses=0008 0009 11:04:02 Msec=3750 True Az=112.995 Ze=-128.25 Az status=0008 Ze status=0009 11:04:02 Check angles 11:04:02 SkyScan query 11:04:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.25<-21950 Statuses=0008 0009 11:04:03 Msec=4500 True Az=112.995 Ze=-149.25 Az status=0008 Ze status=0009 11:04:03 Check angles 11:04:03 SkyScan query 11:04:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.19<-23346 Statuses=0008 0009 11:04:03 Msec=5250 True Az=112.995 Ze=-170.19 Az status=0008 Ze status=0009 11:04:04 Check angles 11:04:04 SkyScan query 11:04:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:04:04 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:04:04 Message to Master queued w/err=0: serial=103825 error=0 11:04:09 Received message from Master: op=Filter serial=103826 11:04:09 Color wheel filter change from 0 to 0 11:04:09 FLIGetFilterPos err=0 currentPosition=0 11:04:09 FLIGetStepsRemaining err=0 RemainingSteps=0 11:04:09 Filter is already there-color wheel unchanged 11:04:09 Received message from Master: op=Shutter serial=103827 11:04:09 Shutter LASER open 11:04:10 Received message from Camera: op=State serial=103829 11:04:10 GetSingleValue result=40 Value=cccccccc 11:04:10 SkyScan query 11:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:04:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:10 Parameters OK 11:04:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:10 Set A/D data flow result=40 11:04:10 Set A/D channel type result=40 11:04:10 Set A/D encoding result=40 11:04:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:10 Set channel filter=0.000000e+000 result=40 11:04:10 Config A/D Result=40 11:04:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:10 Get A/D filter: -9.255963e+061 result=40 11:04:10 Get A/D value=-858993460 result=40 11:04:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:10 Parameters OK 11:04:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:10 Set A/D data flow result=40 11:04:10 Set A/D channel type result=40 11:04:10 Set A/D encoding result=40 11:04:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:10 Set channel filter=0.000000e+000 result=40 11:04:10 Config A/D Result=40 11:04:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:10 Get A/D filter: -9.255963e+061 result=40 11:04:10 Get A/D value=-858993460 result=40 11:04:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:04:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:04:10 Aux= 11:04:10 Message to Camera, serial 103829 queued 11:04:19 Received message from Master: op=Shutter serial=103839 11:04:19 Shutter LASER close 11:04:19 Received message from Master: op=PointingHead serial=103843 11:04:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:04:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:04:19 Point started: ret=0 11:04:19 point_skyscan result=0 11:04:20 Check angles 11:04:20 SkyScan query 11:04:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.83<-21522 Statuses=0008 0009 11:04:21 Msec=0 True Az=112.995 Ze=-142.83 Az status=0008 Ze status=0009 11:04:21 Check angles 11:04:21 SkyScan query 11:04:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.395<-20093 Statuses=0008 0009 11:04:21 Msec=750 True Az=112.995 Ze=-121.395 Az status=0008 Ze status=0009 11:04:22 Check angles 11:04:22 SkyScan query 11:04:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.425<-18695 Statuses=0008 0009 11:04:22 Msec=1500 True Az=112.995 Ze=-100.425 Az status=0008 Ze status=0009 11:04:22 Check angles 11:04:22 SkyScan query 11:04:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.455<-17297 Statuses=0008 0009 11:04:23 Msec=2250 True Az=112.995 Ze=-79.455 Az status=0008 Ze status=0009 11:04:23 Check angles 11:04:23 SkyScan query 11:04:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.515<-15901 Statuses=0008 0009 11:04:24 Msec=3000 True Az=112.995 Ze=-58.515 Az status=0008 Ze status=0009 11:04:24 Check angles 11:04:24 SkyScan query 11:04:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.575<-14505 Statuses=0008 0009 11:04:24 Msec=3750 True Az=112.995 Ze=-37.575 Az status=0008 Ze status=0009 11:04:25 Check angles 11:04:25 SkyScan query 11:04:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.605<-13107 Statuses=0008 0009 11:04:25 Msec=4500 True Az=112.995 Ze=-16.605 Az status=0008 Ze status=0009 11:04:25 Check angles 11:04:25 SkyScan query 11:04:26 SkyScan query done: ret=0 az=112.995<-7533 ze=4.275<-11715 Statuses=0008 0009 11:04:26 Msec=5250 True Az=112.995 Ze=4.275 Az status=0008 Ze status=0009 11:04:26 Check angles 11:04:26 SkyScan query 11:04:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:04:27 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:04:27 Message to Master queued w/err=0: serial=103843 error=0 11:04:32 Received message from Master: op=Filter serial=103844 11:04:32 Color wheel filter change from 0 to 0 11:04:32 FLIGetFilterPos err=0 currentPosition=0 11:04:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:04:32 Filter is already there-color wheel unchanged 11:04:32 Received message from Master: op=Shutter serial=103845 11:04:32 Shutter LASER close 11:04:32 Received message from Camera: op=State serial=103847 11:04:32 GetSingleValue result=40 Value=cccccccc 11:04:32 SkyScan query 11:04:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:04:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:33 Parameters OK 11:04:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:33 Set A/D data flow result=40 11:04:33 Set A/D channel type result=40 11:04:33 Set A/D encoding result=40 11:04:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:33 Set channel filter=0.000000e+000 result=40 11:04:33 Config A/D Result=40 11:04:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:33 Get A/D filter: -9.255963e+061 result=40 11:04:33 Get A/D value=-858993460 result=40 11:04:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:33 Parameters OK 11:04:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:33 Set A/D data flow result=40 11:04:33 Set A/D channel type result=40 11:04:33 Set A/D encoding result=40 11:04:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:33 Set channel filter=0.000000e+000 result=40 11:04:33 Config A/D Result=40 11:04:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:33 Get A/D filter: -9.255963e+061 result=40 11:04:33 Get A/D value=-858993460 result=40 11:04:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:04:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:04:33 Aux= 11:04:33 Message to Camera, serial 103847 queued 11:05:09 Received message from Master: op=PointingHead serial=103860 11:05:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:05:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:05:10 Point started: ret=0 11:05:10 point_skyscan result=0 11:05:10 Check angles 11:05:10 SkyScan query 11:05:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:05:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:05:11 Message to Master queued w/err=0: serial=103860 error=0 11:05:16 Received message from Master: op=Filter serial=103861 11:05:16 Color wheel filter change from 0 to 0 11:05:16 FLIGetFilterPos err=0 currentPosition=0 11:05:16 FLIGetStepsRemaining err=0 RemainingSteps=0 11:05:16 Filter is already there-color wheel unchanged 11:05:16 Received message from Master: op=Shutter serial=103862 11:05:16 Shutter LASER close 11:05:16 Received message from Camera: op=State serial=103864 11:05:16 GetSingleValue result=40 Value=cccccccc 11:05:16 SkyScan query 11:05:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:05:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:17 Parameters OK 11:05:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:17 Set A/D data flow result=40 11:05:17 Set A/D channel type result=40 11:05:17 Set A/D encoding result=40 11:05:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:17 Set channel filter=0.000000e+000 result=40 11:05:17 Config A/D Result=40 11:05:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:17 Get A/D filter: -9.255963e+061 result=40 11:05:17 Get A/D value=-858993460 result=40 11:05:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:17 Parameters OK 11:05:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:17 Set A/D data flow result=40 11:05:17 Set A/D channel type result=40 11:05:17 Set A/D encoding result=40 11:05:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:17 Set channel filter=0.000000e+000 result=40 11:05:17 Config A/D Result=40 11:05:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:17 Get A/D filter: -9.255963e+061 result=40 11:05:17 Get A/D value=-858993460 result=40 11:05:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:05:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:05:17 Aux= 11:05:17 Message to Camera, serial 103864 queued 11:05:54 Received message from Master: op=PointingHead serial=103877 11:05:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:05:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:05:54 Point started: ret=0 11:05:54 point_skyscan result=0 11:05:55 Check angles 11:05:55 SkyScan query 11:05:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:05:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:05:55 Message to Master queued w/err=0: serial=103877 error=0 11:06:00 Received message from Master: op=Filter serial=103878 11:06:00 Color wheel filter change from 0 to 0 11:06:00 FLIGetFilterPos err=0 currentPosition=0 11:06:00 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:00 Filter is already there-color wheel unchanged 11:06:01 Received message from Master: op=Shutter serial=103879 11:06:01 Shutter LASER close 11:06:01 Received message from Camera: op=State serial=103881 11:06:01 GetSingleValue result=40 Value=cccccccc 11:06:01 SkyScan query 11:06:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:06:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:01 Parameters OK 11:06:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:01 Set A/D data flow result=40 11:06:01 Set A/D channel type result=40 11:06:01 Set A/D encoding result=40 11:06:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:01 Set channel filter=0.000000e+000 result=40 11:06:01 Config A/D Result=40 11:06:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:01 Get A/D filter: -9.255963e+061 result=40 11:06:01 Get A/D value=-858993460 result=40 11:06:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:01 Parameters OK 11:06:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:01 Set A/D data flow result=40 11:06:01 Set A/D channel type result=40 11:06:01 Set A/D encoding result=40 11:06:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:01 Set channel filter=0.000000e+000 result=40 11:06:01 Config A/D Result=40 11:06:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:01 Get A/D filter: -9.255963e+061 result=40 11:06:01 Get A/D value=-858993460 result=40 11:06:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:01 Aux= 11:06:01 Message to Camera, serial 103881 queued 11:06:38 Received message from Master: op=PointingHead serial=103894 11:06:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:06:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:06:38 Point started: ret=0 11:06:38 point_skyscan result=0 11:06:39 Check angles 11:06:39 SkyScan query 11:06:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:06:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:06:40 Message to Master queued w/err=0: serial=103894 error=0 11:06:45 Received message from Master: op=Filter serial=103895 11:06:45 Color wheel filter change from 0 to 0 11:06:45 FLIGetFilterPos err=0 currentPosition=0 11:06:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:45 Filter is already there-color wheel unchanged 11:06:45 Received message from Master: op=Shutter serial=103896 11:06:45 Shutter LASER close 11:06:45 Received message from Camera: op=State serial=103898 11:06:45 GetSingleValue result=40 Value=cccccccc 11:06:45 SkyScan query 11:06:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:06:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:45 Parameters OK 11:06:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:45 Set A/D data flow result=40 11:06:45 Set A/D channel type result=40 11:06:45 Set A/D encoding result=40 11:06:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:45 Set channel filter=0.000000e+000 result=40 11:06:45 Config A/D Result=40 11:06:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:45 Get A/D filter: -9.255963e+061 result=40 11:06:45 Get A/D value=-858993460 result=40 11:06:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:45 Parameters OK 11:06:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:45 Set A/D data flow result=40 11:06:45 Set A/D channel type result=40 11:06:45 Set A/D encoding result=40 11:06:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:45 Set channel filter=0.000000e+000 result=40 11:06:45 Config A/D Result=40 11:06:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:45 Get A/D filter: -9.255963e+061 result=40 11:06:45 Get A/D value=-858993460 result=40 11:06:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:45 Aux= 11:06:45 Message to Camera, serial 103898 queued 11:07:22 Received message from Master: op=PointingHead serial=103911 11:07:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:07:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:07:23 Point started: ret=0 11:07:23 point_skyscan result=0 11:07:23 Check angles 11:07:23 SkyScan query 11:07:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 11:07:24 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 11:07:24 Check angles 11:07:24 SkyScan query 11:07:25 SkyScan query done: ret=0 az=112.98<-7532 ze=-44.1<-14940 Statuses=0008 0009 11:07:25 Msec=750 True Az=112.98 Ze=-44.1 Az status=0008 Ze status=0009 11:07:25 Check angles 11:07:25 SkyScan query 11:07:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.025<-16335 Statuses=0008 0009 11:07:25 Msec=1500 True Az=112.995 Ze=-65.025 Az status=0008 Ze status=0009 11:07:26 Check angles 11:07:26 SkyScan query 11:07:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 11:07:26 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 11:07:26 Check angles 11:07:26 SkyScan query 11:07:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.325<-19155 Statuses=0008 0009 11:07:27 Msec=3000 True Az=112.995 Ze=-107.325 Az status=0008 Ze status=0009 11:07:27 Check angles 11:07:27 SkyScan query 11:07:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.28<-20552 Statuses=0008 0009 11:07:28 Msec=3750 True Az=112.995 Ze=-128.28 Az status=0008 Ze status=0009 11:07:28 Check angles 11:07:28 SkyScan query 11:07:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.73<-21982 Statuses=0008 0009 11:07:28 Msec=4500 True Az=112.995 Ze=-149.73 Az status=0008 Ze status=0009 11:07:29 Check angles 11:07:29 SkyScan query 11:07:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.64<-23376 Statuses=0008 0009 11:07:29 Msec=5250 True Az=112.995 Ze=-170.64 Az status=0008 Ze status=0009 11:07:29 Check angles 11:07:29 SkyScan query 11:07:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:07:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:07:30 Message to Master queued w/err=0: serial=103911 error=0 11:07:35 Received message from Master: op=Filter serial=103912 11:07:35 Color wheel filter change from 0 to 0 11:07:35 FLIGetFilterPos err=0 currentPosition=0 11:07:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:35 Filter is already there-color wheel unchanged 11:07:35 Received message from Master: op=Shutter serial=103913 11:07:35 Shutter LASER open 11:07:35 Received message from Camera: op=State serial=103915 11:07:35 GetSingleValue result=40 Value=cccccccc 11:07:35 SkyScan query 11:07:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:07:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:36 Parameters OK 11:07:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:36 Set A/D data flow result=40 11:07:36 Set A/D channel type result=40 11:07:36 Set A/D encoding result=40 11:07:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:36 Set channel filter=0.000000e+000 result=40 11:07:36 Config A/D Result=40 11:07:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:36 Get A/D filter: -9.255963e+061 result=40 11:07:36 Get A/D value=-858993460 result=40 11:07:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:36 Parameters OK 11:07:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:36 Set A/D data flow result=40 11:07:36 Set A/D channel type result=40 11:07:36 Set A/D encoding result=40 11:07:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:36 Set channel filter=0.000000e+000 result=40 11:07:36 Config A/D Result=40 11:07:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:36 Get A/D filter: -9.255963e+061 result=40 11:07:36 Get A/D value=-858993460 result=40 11:07:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:07:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:07:36 Aux= 11:07:36 Message to Camera, serial 103915 queued 11:07:44 Received message from Master: op=Shutter serial=103925 11:07:44 Shutter LASER close 11:07:45 Received message from Master: op=PointingHead serial=103929 11:07:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:07:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:07:45 Point started: ret=0 11:07:45 point_skyscan result=0 11:07:46 Check angles 11:07:46 SkyScan query 11:07:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 11:07:47 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 11:07:47 Check angles 11:07:47 SkyScan query 11:07:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.55<-20170 Statuses=0008 0009 11:07:47 Msec=750 True Az=112.995 Ze=-122.55 Az status=0008 Ze status=0009 11:07:47 Check angles 11:07:47 SkyScan query 11:07:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.58<-18772 Statuses=0008 0009 11:07:48 Msec=1500 True Az=112.995 Ze=-101.58 Az status=0008 Ze status=0009 11:07:48 Check angles 11:07:48 SkyScan query 11:07:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.61<-17374 Statuses=0008 0009 11:07:49 Msec=2250 True Az=112.995 Ze=-80.61 Az status=0008 Ze status=0009 11:07:49 Check angles 11:07:49 SkyScan query 11:07:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.685<-15979 Statuses=0008 0009 11:07:50 Msec=3000 True Az=112.995 Ze=-59.685 Az status=0008 Ze status=0009 11:07:50 Check angles 11:07:50 SkyScan query 11:07:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.73<-14582 Statuses=0008 0009 11:07:50 Msec=3750 True Az=112.995 Ze=-38.73 Az status=0008 Ze status=0009 11:07:50 Check angles 11:07:50 SkyScan query 11:07:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.76<-13184 Statuses=0008 0009 11:07:51 Msec=4500 True Az=112.995 Ze=-17.76 Az status=0008 Ze status=0009 11:07:51 Check angles 11:07:51 SkyScan query 11:07:52 SkyScan query done: ret=0 az=112.995<-7533 ze=3.195<-11787 Statuses=0008 0009 11:07:52 Msec=5250 True Az=112.995 Ze=3.195 Az status=0008 Ze status=0009 11:07:52 Check angles 11:07:52 SkyScan query 11:07:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:07:53 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:07:53 Message to Master queued w/err=0: serial=103929 error=0 11:07:58 Received message from Master: op=Filter serial=103930 11:07:58 Color wheel filter change from 0 to 0 11:07:58 FLIGetFilterPos err=0 currentPosition=0 11:07:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:58 Filter is already there-color wheel unchanged 11:07:58 Received message from Master: op=Shutter serial=103931 11:07:58 Shutter LASER close 11:07:58 Received message from Camera: op=State serial=103933 11:07:58 GetSingleValue result=40 Value=cccccccc 11:07:58 SkyScan query 11:07:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:07:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:59 Parameters OK 11:07:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:59 Set A/D data flow result=40 11:07:59 Set A/D channel type result=40 11:07:59 Set A/D encoding result=40 11:07:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:59 Set channel filter=0.000000e+000 result=40 11:07:59 Config A/D Result=40 11:07:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:59 Get A/D filter: -9.255963e+061 result=40 11:07:59 Get A/D value=-858993460 result=40 11:07:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:59 Parameters OK 11:07:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:59 Set A/D data flow result=40 11:07:59 Set A/D channel type result=40 11:07:59 Set A/D encoding result=40 11:07:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:59 Set channel filter=0.000000e+000 result=40 11:07:59 Config A/D Result=40 11:07:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:59 Get A/D filter: -9.255963e+061 result=40 11:07:59 Get A/D value=-858993460 result=40 11:07:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:07:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:07:59 Aux= 11:07:59 Message to Camera, serial 103933 queued 11:08:35 Received message from Master: op=PointingHead serial=103946 11:08:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:08:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:08:36 Point started: ret=0 11:08:36 point_skyscan result=0 11:08:37 Check angles 11:08:37 SkyScan query 11:08:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:08:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:08:37 Message to Master queued w/err=0: serial=103946 error=0 11:08:42 Received message from Master: op=Filter serial=103947 11:08:42 Color wheel filter change from 0 to 0 11:08:42 FLIGetFilterPos err=0 currentPosition=0 11:08:42 FLIGetStepsRemaining err=0 RemainingSteps=0 11:08:42 Filter is already there-color wheel unchanged 11:08:42 Received message from Master: op=Shutter serial=103948 11:08:42 Shutter LASER close 11:08:42 Received message from Camera: op=State serial=103950 11:08:42 GetSingleValue result=40 Value=cccccccc 11:08:42 SkyScan query 11:08:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:08:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:43 Parameters OK 11:08:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:43 Set A/D data flow result=40 11:08:43 Set A/D channel type result=40 11:08:43 Set A/D encoding result=40 11:08:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:43 Set channel filter=0.000000e+000 result=40 11:08:43 Config A/D Result=40 11:08:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:43 Get A/D filter: -9.255963e+061 result=40 11:08:43 Get A/D value=-858993460 result=40 11:08:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:43 Parameters OK 11:08:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:43 Set A/D data flow result=40 11:08:43 Set A/D channel type result=40 11:08:43 Set A/D encoding result=40 11:08:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:43 Set channel filter=0.000000e+000 result=40 11:08:43 Config A/D Result=40 11:08:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:43 Get A/D filter: -9.255963e+061 result=40 11:08:43 Get A/D value=-858993460 result=40 11:08:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:08:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:08:43 Aux= 11:08:43 Message to Camera, serial 103950 queued 11:09:20 Received message from Master: op=PointingHead serial=103963 11:09:20 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:09:20 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:09:20 Point started: ret=0 11:09:20 point_skyscan result=0 11:09:21 Check angles 11:09:21 SkyScan query 11:09:21 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 11:09:21 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 11:09:22 Check angles 11:09:22 SkyScan query 11:09:22 SkyScan query done: ret=0 az=154.125<-10275 ze=-6.51<-12434 Statuses=0009 0008 11:09:22 Msec=750 True Az=154.125 Ze=-6.51 Az status=0009 Ze status=0008 11:09:22 Check angles 11:09:22 SkyScan query 11:09:23 SkyScan query done: ret=0 az=171.57<-11438 ze=-6.495<-12433 Statuses=0009 0008 11:09:23 Msec=1500 True Az=171.57 Ze=-6.495 Az status=0009 Ze status=0008 11:09:23 Check angles 11:09:23 SkyScan query 11:09:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:09:24 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:09:24 Message to Master queued w/err=0: serial=103963 error=0 11:09:29 Received message from Master: op=Filter serial=103964 11:09:29 Color wheel filter change from 0 to 0 11:09:29 FLIGetFilterPos err=0 currentPosition=0 11:09:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:09:29 Filter is already there-color wheel unchanged 11:09:29 Received message from Master: op=Shutter serial=103965 11:09:29 Shutter LASER close 11:09:29 Received message from Camera: op=State serial=103967 11:09:29 GetSingleValue result=40 Value=cccccccc 11:09:29 SkyScan query 11:09:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:09:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:29 Parameters OK 11:09:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:29 Set A/D data flow result=40 11:09:29 Set A/D channel type result=40 11:09:29 Set A/D encoding result=40 11:09:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:29 Set channel filter=0.000000e+000 result=40 11:09:29 Config A/D Result=40 11:09:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:29 Get A/D filter: -9.255963e+061 result=40 11:09:29 Get A/D value=-858993460 result=40 11:09:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:29 Parameters OK 11:09:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:29 Set A/D data flow result=40 11:09:29 Set A/D channel type result=40 11:09:29 Set A/D encoding result=40 11:09:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:29 Set channel filter=0.000000e+000 result=40 11:09:29 Config A/D Result=40 11:09:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:29 Get A/D filter: -9.255963e+061 result=40 11:09:29 Get A/D value=-858993460 result=40 11:09:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:09:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:09:29 Aux= 11:09:29 Message to Camera, serial 103967 queued 11:10:06 Received message from Master: op=PointingHead serial=103980 11:10:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:10:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:10:07 Point started: ret=0 11:10:07 point_skyscan result=0 11:10:07 Check angles 11:10:07 SkyScan query 11:10:08 SkyScan query done: ret=0 az=152.925<-10195 ze=6.51<-11566 Statuses=0009 0008 11:10:08 Msec=0 True Az=152.925 Ze=6.51 Az status=0009 Ze status=0008 11:10:08 Check angles 11:10:08 SkyScan query 11:10:09 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 11:10:09 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 11:10:09 Check angles 11:10:09 SkyScan query 11:10:09 SkyScan query done: ret=0 az=117.6<-7840 ze=6.495<-11567 Statuses=0009 0008 11:10:09 Msec=1500 True Az=117.6 Ze=6.495 Az status=0009 Ze status=0008 11:10:10 Check angles 11:10:10 SkyScan query 11:10:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:10:10 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:10:10 Message to Master queued w/err=0: serial=103980 error=0 11:10:15 Received message from Master: op=Filter serial=103981 11:10:15 Color wheel filter change from 0 to 0 11:10:15 FLIGetFilterPos err=0 currentPosition=0 11:10:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:10:15 Filter is already there-color wheel unchanged 11:10:15 Received message from Master: op=Shutter serial=103982 11:10:15 Shutter LASER close 11:10:15 Received message from Camera: op=State serial=103984 11:10:15 GetSingleValue result=40 Value=cccccccc 11:10:15 SkyScan query 11:10:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:10:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:16 Parameters OK 11:10:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:16 Set A/D data flow result=40 11:10:16 Set A/D channel type result=40 11:10:16 Set A/D encoding result=40 11:10:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:16 Set channel filter=0.000000e+000 result=40 11:10:16 Config A/D Result=40 11:10:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:16 Get A/D filter: -9.255963e+061 result=40 11:10:16 Get A/D value=-858993460 result=40 11:10:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:16 Parameters OK 11:10:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:16 Set A/D data flow result=40 11:10:16 Set A/D channel type result=40 11:10:16 Set A/D encoding result=40 11:10:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:16 Set channel filter=0.000000e+000 result=40 11:10:16 Config A/D Result=40 11:10:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:16 Get A/D filter: -9.255963e+061 result=40 11:10:16 Get A/D value=-858993460 result=40 11:10:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:10:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:10:16 Aux= 11:10:16 Message to Camera, serial 103984 queued 11:10:53 Received message from Master: op=PointingHead serial=103997 11:10:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:10:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:10:53 Point started: ret=0 11:10:53 point_skyscan result=0 11:10:54 Check angles 11:10:54 SkyScan query 11:10:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.43<-13562 Statuses=0008 0009 11:10:55 Msec=0 True Az=112.995 Ze=-23.43 Az status=0008 Ze status=0009 11:10:55 Check angles 11:10:55 SkyScan query 11:10:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 11:10:55 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 11:10:55 Check angles 11:10:55 SkyScan query 11:10:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 11:10:56 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 11:10:56 Check angles 11:10:56 SkyScan query 11:10:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.745<-17783 Statuses=0008 0009 11:10:57 Msec=2250 True Az=112.995 Ze=-86.745 Az status=0008 Ze status=0009 11:10:57 Check angles 11:10:57 SkyScan query 11:10:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.73<-19182 Statuses=0008 0009 11:10:58 Msec=3000 True Az=112.995 Ze=-107.73 Az status=0008 Ze status=0009 11:10:58 Check angles 11:10:58 SkyScan query 11:10:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.655<-20577 Statuses=0008 0009 11:10:58 Msec=3750 True Az=112.995 Ze=-128.655 Az status=0008 Ze status=0009 11:10:58 Check angles 11:10:58 SkyScan query 11:10:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.06<-22004 Statuses=0008 0009 11:10:59 Msec=4500 True Az=112.995 Ze=-150.06 Az status=0008 Ze status=0009 11:10:59 Check angles 11:10:59 SkyScan query 11:11:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.91<-23394 Statuses=0008 0009 11:11:00 Msec=5250 True Az=112.995 Ze=-170.91 Az status=0008 Ze status=0009 11:11:00 Check angles 11:11:00 SkyScan query 11:11:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:11:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:11:01 Message to Master queued w/err=0: serial=103997 error=0 11:11:06 Received message from Master: op=Filter serial=103998 11:11:06 Color wheel filter change from 0 to 0 11:11:06 FLIGetFilterPos err=0 currentPosition=0 11:11:06 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:06 Filter is already there-color wheel unchanged 11:11:06 Received message from Master: op=Shutter serial=103999 11:11:06 Shutter LASER open 11:11:06 Received message from Camera: op=State serial=104001 11:11:06 GetSingleValue result=40 Value=cccccccc 11:11:06 SkyScan query 11:11:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:11:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:06 Parameters OK 11:11:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:06 Set A/D data flow result=40 11:11:06 Set A/D channel type result=40 11:11:06 Set A/D encoding result=40 11:11:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:06 Set channel filter=0.000000e+000 result=40 11:11:06 Config A/D Result=40 11:11:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:06 Get A/D filter: -9.255963e+061 result=40 11:11:06 Get A/D value=-858993460 result=40 11:11:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:06 Parameters OK 11:11:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:06 Set A/D data flow result=40 11:11:06 Set A/D channel type result=40 11:11:06 Set A/D encoding result=40 11:11:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:06 Set channel filter=0.000000e+000 result=40 11:11:06 Config A/D Result=40 11:11:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:06 Get A/D filter: -9.255963e+061 result=40 11:11:06 Get A/D value=-858993460 result=40 11:11:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:06 Aux= 11:11:06 Message to Camera, serial 104001 queued 11:11:15 Received message from Master: op=Shutter serial=104011 11:11:15 Shutter LASER close 11:11:15 Received message from Master: op=PointingHead serial=104015 11:11:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:11:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:11:16 Point started: ret=0 11:11:16 point_skyscan result=0 11:11:16 Check angles 11:11:16 SkyScan query 11:11:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.025<-21535 Statuses=0008 0009 11:11:17 Msec=0 True Az=112.995 Ze=-143.025 Az status=0008 Ze status=0009 11:11:17 Check angles 11:11:17 SkyScan query 11:11:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 11:11:18 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 11:11:18 Check angles 11:11:18 SkyScan query 11:11:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 11:11:19 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 11:11:19 Check angles 11:11:19 SkyScan query 11:11:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.16<-17344 Statuses=0008 0009 11:11:19 Msec=2250 True Az=112.995 Ze=-80.16 Az status=0008 Ze status=0009 11:11:19 Check angles 11:11:19 SkyScan query 11:11:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 11:11:20 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 11:11:20 Check angles 11:11:20 SkyScan query 11:11:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.19<-14546 Statuses=0008 0009 11:11:21 Msec=3750 True Az=112.995 Ze=-38.19 Az status=0008 Ze status=0009 11:11:21 Check angles 11:11:21 SkyScan query 11:11:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.265<-13151 Statuses=0008 0009 11:11:22 Msec=4500 True Az=112.995 Ze=-17.265 Az status=0008 Ze status=0009 11:11:22 Check angles 11:11:22 SkyScan query 11:11:22 SkyScan query done: ret=0 az=112.995<-7533 ze=3.72<-11752 Statuses=0008 0009 11:11:22 Msec=5250 True Az=112.995 Ze=3.72 Az status=0008 Ze status=0009 11:11:22 Check angles 11:11:22 SkyScan query 11:11:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:11:23 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:11:23 Message to Master queued w/err=0: serial=104015 error=0 11:11:28 Received message from Master: op=Filter serial=104016 11:11:28 Color wheel filter change from 0 to 0 11:11:28 FLIGetFilterPos err=0 currentPosition=0 11:11:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:28 Filter is already there-color wheel unchanged 11:11:28 Received message from Master: op=Shutter serial=104017 11:11:28 Shutter LASER close 11:11:28 Received message from Camera: op=State serial=104019 11:11:28 GetSingleValue result=40 Value=cccccccc 11:11:28 SkyScan query 11:11:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:11:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:29 Parameters OK 11:11:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:29 Set A/D data flow result=40 11:11:29 Set A/D channel type result=40 11:11:29 Set A/D encoding result=40 11:11:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:29 Set channel filter=0.000000e+000 result=40 11:11:29 Config A/D Result=40 11:11:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:29 Get A/D filter: -9.255963e+061 result=40 11:11:29 Get A/D value=-858993460 result=40 11:11:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:29 Parameters OK 11:11:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:29 Set A/D data flow result=40 11:11:29 Set A/D channel type result=40 11:11:29 Set A/D encoding result=40 11:11:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:29 Set channel filter=0.000000e+000 result=40 11:11:29 Config A/D Result=40 11:11:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:29 Get A/D filter: -9.255963e+061 result=40 11:11:29 Get A/D value=-858993460 result=40 11:11:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:29 Aux= 11:11:29 Message to Camera, serial 104019 queued 11:12:06 Received message from Master: op=PointingHead serial=104032 11:12:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:12:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:12:06 Point started: ret=0 11:12:06 point_skyscan result=0 11:12:07 Check angles 11:12:07 SkyScan query 11:12:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:12:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:12:07 Message to Master queued w/err=0: serial=104032 error=0 11:12:12 Received message from Master: op=Filter serial=104033 11:12:12 Color wheel filter change from 0 to 0 11:12:12 FLIGetFilterPos err=0 currentPosition=0 11:12:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:12 Filter is already there-color wheel unchanged 11:12:13 Received message from Master: op=Shutter serial=104034 11:12:13 Shutter LASER close 11:12:13 Received message from Camera: op=State serial=104036 11:12:13 GetSingleValue result=40 Value=cccccccc 11:12:13 SkyScan query 11:12:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:12:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:13 Parameters OK 11:12:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:13 Set A/D data flow result=40 11:12:13 Set A/D channel type result=40 11:12:13 Set A/D encoding result=40 11:12:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:13 Set channel filter=0.000000e+000 result=40 11:12:13 Config A/D Result=40 11:12:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:13 Get A/D filter: -9.255963e+061 result=40 11:12:13 Get A/D value=-858993460 result=40 11:12:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:13 Parameters OK 11:12:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:13 Set A/D data flow result=40 11:12:13 Set A/D channel type result=40 11:12:13 Set A/D encoding result=40 11:12:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:13 Set channel filter=0.000000e+000 result=40 11:12:13 Config A/D Result=40 11:12:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:13 Get A/D filter: -9.255963e+061 result=40 11:12:13 Get A/D value=-858993460 result=40 11:12:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:13 Aux= 11:12:13 Message to Camera, serial 104036 queued 11:12:50 Received message from Master: op=PointingHead serial=104049 11:12:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:12:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:12:50 Point started: ret=0 11:12:50 point_skyscan result=0 11:12:51 Check angles 11:12:51 SkyScan query 11:12:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:12:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:12:52 Message to Master queued w/err=0: serial=104049 error=0 11:12:57 Received message from Master: op=Filter serial=104050 11:12:57 Color wheel filter change from 0 to 0 11:12:57 FLIGetFilterPos err=0 currentPosition=0 11:12:57 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:57 Filter is already there-color wheel unchanged 11:12:57 Received message from Master: op=Shutter serial=104051 11:12:57 Shutter LASER close 11:12:57 Received message from Camera: op=State serial=104053 11:12:57 GetSingleValue result=40 Value=cccccccc 11:12:57 SkyScan query 11:12:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:12:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:58 Parameters OK 11:12:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:58 Set A/D data flow result=40 11:12:58 Set A/D channel type result=40 11:12:58 Set A/D encoding result=40 11:12:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:58 Set channel filter=0.000000e+000 result=40 11:12:58 Config A/D Result=40 11:12:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:58 Get A/D filter: -9.255963e+061 result=40 11:12:58 Get A/D value=-858993460 result=40 11:12:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:58 Parameters OK 11:12:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:58 Set A/D data flow result=40 11:12:58 Set A/D channel type result=40 11:12:58 Set A/D encoding result=40 11:12:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:58 Set channel filter=0.000000e+000 result=40 11:12:58 Config A/D Result=40 11:12:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:58 Get A/D filter: -9.255963e+061 result=40 11:12:58 Get A/D value=-858993460 result=40 11:12:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:58 Aux= 11:12:58 Message to Camera, serial 104053 queued 11:13:34 Received message from Master: op=PointingHead serial=104066 11:13:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:13:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:13:35 Point started: ret=0 11:13:35 point_skyscan result=0 11:13:36 Check angles 11:13:36 SkyScan query 11:13:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:13:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:13:36 Message to Master queued w/err=0: serial=104066 error=0 11:13:41 Received message from Master: op=Filter serial=104067 11:13:41 Color wheel filter change from 0 to 0 11:13:41 FLIGetFilterPos err=0 currentPosition=0 11:13:41 FLIGetStepsRemaining err=0 RemainingSteps=0 11:13:41 Filter is already there-color wheel unchanged 11:13:41 Received message from Master: op=Shutter serial=104068 11:13:41 Shutter LASER close 11:13:41 Received message from Camera: op=State serial=104070 11:13:41 GetSingleValue result=40 Value=cccccccc 11:13:41 SkyScan query 11:13:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:13:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:42 Parameters OK 11:13:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:42 Set A/D data flow result=40 11:13:42 Set A/D channel type result=40 11:13:42 Set A/D encoding result=40 11:13:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:42 Set channel filter=0.000000e+000 result=40 11:13:42 Config A/D Result=40 11:13:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:42 Get A/D filter: -9.255963e+061 result=40 11:13:42 Get A/D value=-858993460 result=40 11:13:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:42 Parameters OK 11:13:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:42 Set A/D data flow result=40 11:13:42 Set A/D channel type result=40 11:13:42 Set A/D encoding result=40 11:13:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:42 Set channel filter=0.000000e+000 result=40 11:13:42 Config A/D Result=40 11:13:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:42 Get A/D filter: -9.255963e+061 result=40 11:13:42 Get A/D value=-858993460 result=40 11:13:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:13:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:13:42 Aux= 11:13:42 Message to Camera, serial 104070 queued 11:14:18 Received message from Master: op=PointingHead serial=104082 11:14:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:14:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:14:18 Point started: ret=0 11:14:18 point_skyscan result=0 11:14:19 Check angles 11:14:19 SkyScan query 11:14:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 11:14:20 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 11:14:20 Check angles 11:14:20 SkyScan query 11:14:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.385<-14959 Statuses=0008 0009 [UTC 2019-3-4 11:14:20] 11:14:20 Msec=750 True Az=112.995 Ze=-44.385 Az status=0008 Ze status=0009 11:14:20 Check angles 11:14:20 SkyScan query 11:14:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.31<-16354 Statuses=0008 0009 11:14:21 Msec=1500 True Az=112.995 Ze=-65.31 Az status=0008 Ze status=0009 11:14:21 Check angles 11:14:21 SkyScan query 11:14:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.25<-17750 Statuses=0008 0009 11:14:22 Msec=2250 True Az=112.995 Ze=-86.25 Az status=0008 Ze status=0009 11:14:22 Check angles 11:14:22 SkyScan query 11:14:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.205<-19147 Statuses=0008 0009 11:14:23 Msec=3000 True Az=112.995 Ze=-107.205 Az status=0008 Ze status=0009 11:14:23 Check angles 11:14:23 SkyScan query 11:14:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.16<-20544 Statuses=0008 0009 11:14:23 Msec=3750 True Az=112.995 Ze=-128.16 Az status=0008 Ze status=0009 11:14:23 Check angles 11:14:23 SkyScan query 11:14:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.13<-21942 Statuses=0008 0009 11:14:24 Msec=4500 True Az=112.995 Ze=-149.13 Az status=0008 Ze status=0009 11:14:24 Check angles 11:14:24 SkyScan query 11:14:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.085<-23339 Statuses=0008 0009 11:14:25 Msec=5250 True Az=112.995 Ze=-170.085 Az status=0008 Ze status=0009 11:14:25 Check angles 11:14:25 SkyScan query 11:14:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:14:26 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:14:26 Message to Master queued w/err=0: serial=104082 error=0 11:14:31 Received message from Master: op=Filter serial=104083 11:14:31 Color wheel filter change from 0 to 0 11:14:31 FLIGetFilterPos err=0 currentPosition=0 11:14:31 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:31 Filter is already there-color wheel unchanged 11:14:31 Received message from Master: op=Shutter serial=104084 11:14:31 Shutter LASER open 11:14:31 Received message from Camera: op=State serial=104086 11:14:31 GetSingleValue result=40 Value=cccccccc 11:14:31 SkyScan query 11:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:14:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:31 Parameters OK 11:14:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:31 Set A/D data flow result=40 11:14:31 Set A/D channel type result=40 11:14:31 Set A/D encoding result=40 11:14:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:31 Set channel filter=0.000000e+000 result=40 11:14:31 Config A/D Result=40 11:14:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:31 Get A/D filter: -9.255963e+061 result=40 11:14:31 Get A/D value=-858993460 result=40 11:14:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:31 Parameters OK 11:14:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:31 Set A/D data flow result=40 11:14:31 Set A/D channel type result=40 11:14:31 Set A/D encoding result=40 11:14:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:31 Set channel filter=0.000000e+000 result=40 11:14:31 Config A/D Result=40 11:14:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:31 Get A/D filter: -9.255963e+061 result=40 11:14:31 Get A/D value=-858993460 result=40 11:14:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:31 Aux= 11:14:31 Message to Camera, serial 104086 queued 11:14:40 Received message from Master: op=Shutter serial=104096 11:14:40 Shutter LASER close 11:14:41 Received message from Master: op=PointingHead serial=104100 11:14:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:14:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:14:41 Point started: ret=0 11:14:41 point_skyscan result=0 11:14:42 Check angles 11:14:42 SkyScan query 11:14:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 11:14:42 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 11:14:42 Check angles 11:14:42 SkyScan query 11:14:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 11:14:43 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 11:14:43 Check angles 11:14:43 SkyScan query 11:14:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 11:14:44 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 11:14:44 Check angles 11:14:44 SkyScan query 11:14:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 11:14:44 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 11:14:45 Check angles 11:14:45 SkyScan query 11:14:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.235<-15949 Statuses=0008 0009 11:14:45 Msec=3000 True Az=112.995 Ze=-59.235 Az status=0008 Ze status=0009 11:14:45 Check angles 11:14:45 SkyScan query 11:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.25<-14550 Statuses=0008 0009 11:14:46 Msec=3750 True Az=112.995 Ze=-38.25 Az status=0008 Ze status=0009 11:14:46 Check angles 11:14:46 SkyScan query 11:14:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.31<-13154 Statuses=0008 0009 11:14:47 Msec=4500 True Az=112.995 Ze=-17.31 Az status=0008 Ze status=0009 11:14:47 Check angles 11:14:47 SkyScan query 11:14:47 SkyScan query done: ret=0 az=112.995<-7533 ze=3.69<-11754 Statuses=0008 0009 11:14:47 Msec=5250 True Az=112.995 Ze=3.69 Az status=0008 Ze status=0009 11:14:48 Check angles 11:14:48 SkyScan query 11:14:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:14:48 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:14:48 Message to Master queued w/err=0: serial=104100 error=0 11:14:53 Received message from Master: op=Filter serial=104101 11:14:53 Color wheel filter change from 0 to 0 11:14:53 FLIGetFilterPos err=0 currentPosition=0 11:14:53 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:53 Filter is already there-color wheel unchanged 11:14:53 Received message from Master: op=Shutter serial=104102 11:14:53 Shutter LASER close 11:14:54 Received message from Camera: op=State serial=104104 11:14:54 GetSingleValue result=40 Value=cccccccc 11:14:54 SkyScan query 11:14:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:14:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:54 Parameters OK 11:14:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:54 Set A/D data flow result=40 11:14:54 Set A/D channel type result=40 11:14:54 Set A/D encoding result=40 11:14:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:54 Set channel filter=0.000000e+000 result=40 11:14:54 Config A/D Result=40 11:14:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:54 Get A/D filter: -9.255963e+061 result=40 11:14:54 Get A/D value=-858993460 result=40 11:14:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:54 Parameters OK 11:14:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:54 Set A/D data flow result=40 11:14:54 Set A/D channel type result=40 11:14:54 Set A/D encoding result=40 11:14:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:54 Set channel filter=0.000000e+000 result=40 11:14:54 Config A/D Result=40 11:14:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:54 Get A/D filter: -9.255963e+061 result=40 11:14:54 Get A/D value=-858993460 result=40 11:14:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:54 Aux= 11:14:54 Message to Camera, serial 104104 queued 11:15:31 Received message from Master: op=PointingHead serial=104117 11:15:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:15:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:15:31 Point started: ret=0 11:15:31 point_skyscan result=0 11:15:32 Check angles 11:15:32 SkyScan query 11:15:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:15:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:15:33 Message to Master queued w/err=0: serial=104117 error=0 11:15:38 Received message from Master: op=Filter serial=104118 11:15:38 Color wheel filter change from 0 to 0 11:15:38 FLIGetFilterPos err=0 currentPosition=0 11:15:38 FLIGetStepsRemaining err=0 RemainingSteps=0 11:15:38 Filter is already there-color wheel unchanged 11:15:38 Received message from Master: op=Shutter serial=104119 11:15:38 Shutter LASER close 11:15:38 Received message from Camera: op=State serial=104121 11:15:38 GetSingleValue result=40 Value=cccccccc 11:15:38 SkyScan query 11:15:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:15:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:38 Parameters OK 11:15:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:38 Set A/D data flow result=40 11:15:38 Set A/D channel type result=40 11:15:38 Set A/D encoding result=40 11:15:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:38 Set channel filter=0.000000e+000 result=40 11:15:38 Config A/D Result=40 11:15:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:38 Get A/D filter: -9.255963e+061 result=40 11:15:38 Get A/D value=-858993460 result=40 11:15:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:38 Parameters OK 11:15:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:38 Set A/D data flow result=40 11:15:38 Set A/D channel type result=40 11:15:38 Set A/D encoding result=40 11:15:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:38 Set channel filter=0.000000e+000 result=40 11:15:38 Config A/D Result=40 11:15:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:38 Get A/D filter: -9.255963e+061 result=40 11:15:38 Get A/D value=-858993460 result=40 11:15:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:15:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:15:38 Aux= 11:15:38 Message to Camera, serial 104121 queued 11:16:15 Received message from Master: op=PointingHead serial=104134 11:16:15 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:16:15 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:16:16 Point started: ret=0 11:16:16 point_skyscan result=0 11:16:16 Check angles 11:16:16 SkyScan query 11:16:17 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 11:16:17 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 11:16:17 Check angles 11:16:17 SkyScan query 11:16:18 SkyScan query done: ret=0 az=153.465<-10231 ze=-6.495<-12433 Statuses=0009 0008 11:16:18 Msec=750 True Az=153.465 Ze=-6.495 Az status=0009 Ze status=0008 11:16:18 Check angles 11:16:18 SkyScan query 11:16:18 SkyScan query done: ret=0 az=171.21<-11414 ze=-6.495<-12433 Statuses=0009 0008 11:16:18 Msec=1500 True Az=171.21 Ze=-6.495 Az status=0009 Ze status=0008 11:16:19 Check angles 11:16:19 SkyScan query 11:16:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:16:19 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:16:19 Message to Master queued w/err=0: serial=104134 error=0 11:16:24 Received message from Master: op=Filter serial=104135 11:16:24 Color wheel filter change from 0 to 0 11:16:24 FLIGetFilterPos err=0 currentPosition=0 11:16:24 FLIGetStepsRemaining err=0 RemainingSteps=0 11:16:24 Filter is already there-color wheel unchanged 11:16:24 Received message from Master: op=Shutter serial=104136 11:16:24 Shutter LASER close 11:16:24 Received message from Camera: op=State serial=104138 11:16:24 GetSingleValue result=40 Value=cccccccc 11:16:24 SkyScan query 11:16:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:16:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:25 Parameters OK 11:16:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:25 Set A/D data flow result=40 11:16:25 Set A/D channel type result=40 11:16:25 Set A/D encoding result=40 11:16:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:25 Set channel filter=0.000000e+000 result=40 11:16:25 Config A/D Result=40 11:16:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:25 Get A/D filter: -9.255963e+061 result=40 11:16:25 Get A/D value=-858993460 result=40 11:16:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:25 Parameters OK 11:16:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:25 Set A/D data flow result=40 11:16:25 Set A/D channel type result=40 11:16:25 Set A/D encoding result=40 11:16:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:25 Set channel filter=0.000000e+000 result=40 11:16:25 Config A/D Result=40 11:16:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:25 Get A/D filter: -9.255963e+061 result=40 11:16:25 Get A/D value=-858993460 result=40 11:16:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:16:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:16:25 Aux= 11:16:25 Message to Camera, serial 104138 queued 11:17:02 Received message from Master: op=PointingHead serial=104151 11:17:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:17:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:17:02 Point started: ret=0 11:17:02 point_skyscan result=0 11:17:03 Check angles 11:17:03 SkyScan query 11:17:03 SkyScan query done: ret=0 az=152.925<-10195 ze=6.51<-11566 Statuses=0009 0008 11:17:03 Msec=0 True Az=152.925 Ze=6.51 Az status=0009 Ze status=0008 11:17:04 Check angles 11:17:04 SkyScan query 11:17:04 SkyScan query done: ret=0 az=135.435<-9029 ze=6.495<-11567 Statuses=0009 0008 11:17:04 Msec=750 True Az=135.435 Ze=6.495 Az status=0009 Ze status=0008 11:17:04 Check angles 11:17:04 SkyScan query 11:17:05 SkyScan query done: ret=0 az=117.96<-7864 ze=6.495<-11567 Statuses=0009 0008 11:17:05 Msec=1500 True Az=117.96 Ze=6.495 Az status=0009 Ze status=0008 11:17:05 Check angles 11:17:05 SkyScan query 11:17:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:17:06 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:17:06 Message to Master queued w/err=0: serial=104151 error=0 11:17:11 Received message from Master: op=Filter serial=104152 11:17:11 Color wheel filter change from 0 to 0 11:17:11 FLIGetFilterPos err=0 currentPosition=0 11:17:11 FLIGetStepsRemaining err=0 RemainingSteps=0 11:17:11 Filter is already there-color wheel unchanged 11:17:11 Received message from Master: op=Shutter serial=104153 11:17:11 Shutter LASER close 11:17:11 Received message from Camera: op=State serial=104155 11:17:11 GetSingleValue result=40 Value=cccccccc 11:17:11 SkyScan query 11:17:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:17:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:11 Parameters OK 11:17:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:11 Set A/D data flow result=40 11:17:11 Set A/D channel type result=40 11:17:11 Set A/D encoding result=40 11:17:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:11 Set channel filter=0.000000e+000 result=40 11:17:11 Config A/D Result=40 11:17:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:11 Get A/D filter: -9.255963e+061 result=40 11:17:11 Get A/D value=-858993460 result=40 11:17:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:11 Parameters OK 11:17:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:11 Set A/D data flow result=40 11:17:11 Set A/D channel type result=40 11:17:11 Set A/D encoding result=40 11:17:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:11 Set channel filter=0.000000e+000 result=40 11:17:11 Config A/D Result=40 11:17:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:11 Get A/D filter: -9.255963e+061 result=40 11:17:11 Get A/D value=-858993460 result=40 11:17:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:17:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:17:11 Aux= 11:17:11 Message to Camera, serial 104155 queued 11:17:48 Received message from Master: op=PointingHead serial=104168 11:17:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:17:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:17:49 Point started: ret=0 11:17:49 point_skyscan result=0 11:17:49 Check angles 11:17:49 SkyScan query 11:17:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 11:17:50 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 11:17:50 Check angles 11:17:50 SkyScan query 11:17:51 SkyScan query done: ret=0 az=112.98<-7532 ze=-44.22<-14948 Statuses=0008 0009 11:17:51 Msec=750 True Az=112.98 Ze=-44.22 Az status=0008 Ze status=0009 11:17:51 Check angles 11:17:51 SkyScan query 11:17:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 11:17:52 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 11:17:52 Check angles 11:17:52 SkyScan query 11:17:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.505<-17767 Statuses=0008 0009 11:17:52 Msec=2250 True Az=112.995 Ze=-86.505 Az status=0008 Ze status=0009 11:17:52 Check angles 11:17:52 SkyScan query 11:17:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.505<-19167 Statuses=0008 0009 11:17:53 Msec=3000 True Az=112.995 Ze=-107.505 Az status=0008 Ze status=0009 11:17:53 Check angles 11:17:53 SkyScan query 11:17:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.445<-20563 Statuses=0008 0009 11:17:54 Msec=3750 True Az=112.995 Ze=-128.445 Az status=0008 Ze status=0009 11:17:54 Check angles 11:17:54 SkyScan query 11:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.445<-21963 Statuses=0008 0009 11:17:55 Msec=4500 True Az=112.995 Ze=-149.445 Az status=0008 Ze status=0009 11:17:55 Check angles 11:17:55 SkyScan query 11:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.385<-23359 Statuses=0008 0009 11:17:55 Msec=5250 True Az=112.995 Ze=-170.385 Az status=0008 Ze status=0009 11:17:55 Check angles 11:17:55 SkyScan query 11:17:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:17:56 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:17:56 Message to Master queued w/err=0: serial=104168 error=0 11:18:01 Received message from Master: op=Filter serial=104169 11:18:01 Color wheel filter change from 0 to 0 11:18:01 FLIGetFilterPos err=0 currentPosition=0 11:18:01 FLIGetStepsRemaining err=0 RemainingSteps=0 11:18:01 Filter is already there-color wheel unchanged 11:18:01 Received message from Master: op=Shutter serial=104170 11:18:01 Shutter LASER open 11:18:01 Received message from Camera: op=State serial=104172 11:18:01 GetSingleValue result=40 Value=cccccccc 11:18:01 SkyScan query 11:18:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:18:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:02 Parameters OK 11:18:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:02 Set A/D data flow result=40 11:18:02 Set A/D channel type result=40 11:18:02 Set A/D encoding result=40 11:18:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:02 Set channel filter=0.000000e+000 result=40 11:18:02 Config A/D Result=40 11:18:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:02 Get A/D filter: -9.255963e+061 result=40 11:18:02 Get A/D value=-858993460 result=40 11:18:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:02 Parameters OK 11:18:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:02 Set A/D data flow result=40 11:18:02 Set A/D channel type result=40 11:18:02 Set A/D encoding result=40 11:18:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:02 Set channel filter=0.000000e+000 result=40 11:18:02 Config A/D Result=40 11:18:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:02 Get A/D filter: -9.255963e+061 result=40 11:18:02 Get A/D value=-858993460 result=40 11:18:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:18:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:18:02 Aux= 11:18:02 Message to Camera, serial 104172 queued 11:18:10 Received message from Master: op=Shutter serial=104182 11:18:10 Shutter LASER close 11:18:11 Received message from Master: op=PointingHead serial=104186 11:18:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:18:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:18:11 Point started: ret=0 11:18:11 point_skyscan result=0 11:18:12 Check angles 11:18:12 SkyScan query 11:18:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 11:18:13 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 11:18:13 Check angles 11:18:13 SkyScan query 11:18:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.74<-20116 Statuses=0008 0009 11:18:13 Msec=750 True Az=112.995 Ze=-121.74 Az status=0008 Ze status=0009 11:18:13 Check angles 11:18:13 SkyScan query 11:18:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.815<-18721 Statuses=0008 0009 11:18:14 Msec=1500 True Az=112.995 Ze=-100.815 Az status=0008 Ze status=0009 11:18:14 Check angles 11:18:14 SkyScan query 11:18:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.83<-17322 Statuses=0008 0009 11:18:15 Msec=2250 True Az=112.995 Ze=-79.83 Az status=0008 Ze status=0009 11:18:15 Check angles 11:18:15 SkyScan query 11:18:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.41<-15894 Statuses=0008 0009 11:18:16 Msec=3000 True Az=112.995 Ze=-58.41 Az status=0008 Ze status=0009 11:18:16 Check angles 11:18:16 SkyScan query 11:18:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.485<-14499 Statuses=0008 0009 11:18:16 Msec=3750 True Az=112.995 Ze=-37.485 Az status=0008 Ze status=0009 11:18:16 Check angles 11:18:16 SkyScan query 11:18:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.53<-13102 Statuses=0008 0009 11:18:17 Msec=4500 True Az=112.995 Ze=-16.53 Az status=0008 Ze status=0009 11:18:17 Check angles 11:18:17 SkyScan query 11:18:18 SkyScan query done: ret=0 az=112.995<-7533 ze=4.665<-11689 Statuses=0008 0009 11:18:18 Msec=5250 True Az=112.995 Ze=4.665 Az status=0008 Ze status=0009 11:18:18 Check angles 11:18:18 SkyScan query 11:18:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:18:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:18:19 Message to Master queued w/err=0: serial=104186 error=0 11:18:24 Received message from Master: op=Filter serial=104187 11:18:24 Color wheel filter change from 0 to 0 11:18:24 FLIGetFilterPos err=0 currentPosition=0 11:18:24 FLIGetStepsRemaining err=0 RemainingSteps=0 11:18:24 Filter is already there-color wheel unchanged 11:18:24 Received message from Master: op=Shutter serial=104188 11:18:24 Shutter LASER close 11:18:24 Received message from Camera: op=State serial=104190 11:18:24 GetSingleValue result=40 Value=cccccccc 11:18:24 SkyScan query 11:18:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:18:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:24 Parameters OK 11:18:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:24 Set A/D data flow result=40 11:18:24 Set A/D channel type result=40 11:18:24 Set A/D encoding result=40 11:18:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:24 Set channel filter=0.000000e+000 result=40 11:18:24 Config A/D Result=40 11:18:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:24 Get A/D filter: -9.255963e+061 result=40 11:18:24 Get A/D value=-858993460 result=40 11:18:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:24 Parameters OK 11:18:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:24 Set A/D data flow result=40 11:18:24 Set A/D channel type result=40 11:18:24 Set A/D encoding result=40 11:18:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:24 Set channel filter=0.000000e+000 result=40 11:18:24 Config A/D Result=40 11:18:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:24 Get A/D filter: -9.255963e+061 result=40 11:18:24 Get A/D value=-858993460 result=40 11:18:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:18:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:18:24 Aux= 11:18:24 Message to Camera, serial 104190 queued 11:19:01 Received message from Master: op=PointingHead serial=104203 11:19:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:19:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:19:02 Point started: ret=0 11:19:02 point_skyscan result=0 11:19:02 Check angles 11:19:02 SkyScan query 11:19:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:19:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:19:03 Message to Master queued w/err=0: serial=104203 error=0 11:19:08 Received message from Master: op=Filter serial=104204 11:19:08 Color wheel filter change from 0 to 0 11:19:08 FLIGetFilterPos err=0 currentPosition=0 11:19:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:08 Filter is already there-color wheel unchanged 11:19:08 Received message from Master: op=Shutter serial=104205 11:19:08 Shutter LASER close 11:19:08 Received message from Camera: op=State serial=104207 11:19:08 GetSingleValue result=40 Value=cccccccc 11:19:08 SkyScan query 11:19:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:19:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:09 Parameters OK 11:19:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:09 Set A/D data flow result=40 11:19:09 Set A/D channel type result=40 11:19:09 Set A/D encoding result=40 11:19:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:09 Set channel filter=0.000000e+000 result=40 11:19:09 Config A/D Result=40 11:19:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:09 Get A/D filter: -9.255963e+061 result=40 11:19:09 Get A/D value=-858993460 result=40 11:19:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:09 Parameters OK 11:19:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:09 Set A/D data flow result=40 11:19:09 Set A/D channel type result=40 11:19:09 Set A/D encoding result=40 11:19:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:09 Set channel filter=0.000000e+000 result=40 11:19:09 Config A/D Result=40 11:19:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:09 Get A/D filter: -9.255963e+061 result=40 11:19:09 Get A/D value=-858993460 result=40 11:19:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:09 Aux= 11:19:09 Message to Camera, serial 104207 queued 11:19:46 Received message from Master: op=PointingHead serial=104220 11:19:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:19:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:19:46 Point started: ret=0 11:19:46 point_skyscan result=0 11:19:47 Check angles 11:19:47 SkyScan query 11:19:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:19:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:19:47 Message to Master queued w/err=0: serial=104220 error=0 11:19:52 Received message from Master: op=Filter serial=104221 11:19:52 Color wheel filter change from 0 to 0 11:19:52 FLIGetFilterPos err=0 currentPosition=0 11:19:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:52 Filter is already there-color wheel unchanged 11:19:52 Received message from Master: op=Shutter serial=104222 11:19:52 Shutter LASER close 11:19:52 Received message from Camera: op=State serial=104224 11:19:52 GetSingleValue result=40 Value=cccccccc 11:19:52 SkyScan query 11:19:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:19:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:53 Parameters OK 11:19:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:53 Set A/D data flow result=40 11:19:53 Set A/D channel type result=40 11:19:53 Set A/D encoding result=40 11:19:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:53 Set channel filter=0.000000e+000 result=40 11:19:53 Config A/D Result=40 11:19:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:53 Get A/D filter: -9.255963e+061 result=40 11:19:53 Get A/D value=-858993460 result=40 11:19:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:53 Parameters OK 11:19:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:53 Set A/D data flow result=40 11:19:53 Set A/D channel type result=40 11:19:53 Set A/D encoding result=40 11:19:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:53 Set channel filter=0.000000e+000 result=40 11:19:53 Config A/D Result=40 11:19:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:53 Get A/D filter: -9.255963e+061 result=40 11:19:53 Get A/D value=-858993460 result=40 11:19:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:53 Aux= 11:19:53 Message to Camera, serial 104224 queued 11:20:30 Received message from Master: op=PointingHead serial=104237 11:20:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:20:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:20:30 Point started: ret=0 11:20:30 point_skyscan result=0 11:20:31 Check angles 11:20:31 SkyScan query 11:20:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:20:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:20:32 Message to Master queued w/err=0: serial=104237 error=0 11:20:37 Received message from Master: op=Filter serial=104238 11:20:37 Color wheel filter change from 0 to 0 11:20:37 FLIGetFilterPos err=0 currentPosition=0 11:20:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:20:37 Filter is already there-color wheel unchanged 11:20:37 Received message from Master: op=Shutter serial=104239 11:20:37 Shutter LASER close 11:20:37 Received message from Camera: op=State serial=104241 11:20:37 GetSingleValue result=40 Value=cccccccc 11:20:37 SkyScan query 11:20:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:20:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:37 Parameters OK 11:20:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:37 Set A/D data flow result=40 11:20:37 Set A/D channel type result=40 11:20:37 Set A/D encoding result=40 11:20:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:37 Set channel filter=0.000000e+000 result=40 11:20:37 Config A/D Result=40 11:20:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:37 Get A/D filter: -9.255963e+061 result=40 11:20:37 Get A/D value=-858993460 result=40 11:20:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:37 Parameters OK 11:20:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:37 Set A/D data flow result=40 11:20:37 Set A/D channel type result=40 11:20:37 Set A/D encoding result=40 11:20:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:37 Set channel filter=0.000000e+000 result=40 11:20:37 Config A/D Result=40 11:20:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:37 Get A/D filter: -9.255963e+061 result=40 11:20:37 Get A/D value=-858993460 result=40 11:20:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:20:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:20:37 Aux= 11:20:37 Message to Camera, serial 104241 queued 11:21:14 Received message from Master: op=PointingHead serial=104254 11:21:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:21:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:21:15 Point started: ret=0 11:21:15 point_skyscan result=0 11:21:15 Check angles 11:21:15 SkyScan query 11:21:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 11:21:16 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 11:21:16 Check angles 11:21:16 SkyScan query 11:21:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.075<-15005 Statuses=0008 0009 11:21:17 Msec=750 True Az=112.995 Ze=-45.075 Az status=0008 Ze status=0009 11:21:17 Check angles 11:21:17 SkyScan query 11:21:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.51<-16434 Statuses=0008 0009 11:21:17 Msec=1500 True Az=112.995 Ze=-66.51 Az status=0008 Ze status=0009 11:21:18 Check angles 11:21:18 SkyScan query 11:21:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.465<-17831 Statuses=0008 0009 11:21:18 Msec=2250 True Az=112.995 Ze=-87.465 Az status=0008 Ze status=0009 11:21:18 Check angles 11:21:18 SkyScan query 11:21:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.81<-19254 Statuses=0008 0009 11:21:19 Msec=3000 True Az=112.995 Ze=-108.81 Az status=0008 Ze status=0009 11:21:19 Check angles 11:21:19 SkyScan query 11:21:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-130.215<-20681 Statuses=0008 0009 11:21:20 Msec=3750 True Az=112.995 Ze=-130.215 Az status=0008 Ze status=0009 11:21:20 Check angles 11:21:20 SkyScan query 11:21:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.14<-22076 Statuses=0008 0009 11:21:20 Msec=4500 True Az=112.995 Ze=-151.14 Az status=0008 Ze status=0009 11:21:21 Check angles 11:21:21 SkyScan query 11:21:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.705<-23447 Statuses=0008 0009 11:21:21 Msec=5250 True Az=112.995 Ze=-171.705 Az status=0008 Ze status=0009 11:21:21 Check angles 11:21:21 SkyScan query 11:21:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:21:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:21:22 Message to Master queued w/err=0: serial=104254 error=0 11:21:27 Received message from Master: op=Filter serial=104255 11:21:27 Color wheel filter change from 0 to 0 11:21:27 FLIGetFilterPos err=0 currentPosition=0 11:21:27 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:27 Filter is already there-color wheel unchanged 11:21:27 Received message from Master: op=Shutter serial=104256 11:21:27 Shutter LASER open 11:21:27 Received message from Camera: op=State serial=104258 11:21:27 GetSingleValue result=40 Value=cccccccc 11:21:27 SkyScan query 11:21:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:21:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:28 Parameters OK 11:21:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:28 Set A/D data flow result=40 11:21:28 Set A/D channel type result=40 11:21:28 Set A/D encoding result=40 11:21:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:28 Set channel filter=0.000000e+000 result=40 11:21:28 Config A/D Result=40 11:21:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:28 Get A/D filter: -9.255963e+061 result=40 11:21:28 Get A/D value=-858993460 result=40 11:21:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:28 Parameters OK 11:21:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:28 Set A/D data flow result=40 11:21:28 Set A/D channel type result=40 11:21:28 Set A/D encoding result=40 11:21:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:28 Set channel filter=0.000000e+000 result=40 11:21:28 Config A/D Result=40 11:21:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:28 Get A/D filter: -9.255963e+061 result=40 11:21:28 Get A/D value=-858993460 result=40 11:21:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:28 Aux= 11:21:28 Message to Camera, serial 104258 queued 11:21:36 Received message from Master: op=Shutter serial=104268 11:21:36 Shutter LASER close 11:21:37 Received message from Master: op=PointingHead serial=104272 11:21:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:21:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:21:37 Point started: ret=0 11:21:37 point_skyscan result=0 11:21:38 Check angles 11:21:38 SkyScan query 11:21:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 11:21:39 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 11:21:39 Check angles 11:21:39 SkyScan query 11:21:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 11:21:39 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 11:21:39 Check angles 11:21:39 SkyScan query 11:21:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.31<-18754 Statuses=0008 0009 11:21:40 Msec=1500 True Az=112.995 Ze=-101.31 Az status=0008 Ze status=0009 11:21:40 Check angles 11:21:40 SkyScan query 11:21:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.31<-17354 Statuses=0008 0009 11:21:41 Msec=2250 True Az=112.995 Ze=-80.31 Az status=0008 Ze status=0009 11:21:41 Check angles 11:21:41 SkyScan query 11:21:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.385<-15959 Statuses=0008 0009 11:21:42 Msec=3000 True Az=112.995 Ze=-59.385 Az status=0008 Ze status=0009 11:21:42 Check angles 11:21:42 SkyScan query 11:21:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.385<-14559 Statuses=0008 0009 11:21:42 Msec=3750 True Az=112.995 Ze=-38.385 Az status=0008 Ze status=0009 11:21:42 Check angles 11:21:42 SkyScan query 11:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.445<-13163 Statuses=0008 0009 11:21:43 Msec=4500 True Az=112.995 Ze=-17.445 Az status=0008 Ze status=0009 11:21:43 Check angles 11:21:43 SkyScan query 11:21:44 SkyScan query done: ret=0 az=112.995<-7533 ze=3.54<-11764 Statuses=0008 0009 11:21:44 Msec=5250 True Az=112.995 Ze=3.54 Az status=0008 Ze status=0009 11:21:44 Check angles 11:21:44 SkyScan query 11:21:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:21:45 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:21:45 Message to Master queued w/err=0: serial=104272 error=0 11:21:50 Received message from Master: op=Filter serial=104273 11:21:50 Color wheel filter change from 0 to 0 11:21:50 FLIGetFilterPos err=0 currentPosition=0 11:21:50 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:50 Filter is already there-color wheel unchanged 11:21:50 Received message from Master: op=Shutter serial=104274 11:21:50 Shutter LASER close 11:21:50 Received message from Camera: op=State serial=104276 11:21:50 GetSingleValue result=40 Value=cccccccc 11:21:50 SkyScan query 11:21:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:21:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:50 Parameters OK 11:21:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:50 Set A/D data flow result=40 11:21:50 Set A/D channel type result=40 11:21:50 Set A/D encoding result=40 11:21:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:50 Set channel filter=0.000000e+000 result=40 11:21:50 Config A/D Result=40 11:21:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:50 Get A/D filter: -9.255963e+061 result=40 11:21:50 Get A/D value=-858993460 result=40 11:21:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:50 Parameters OK 11:21:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:50 Set A/D data flow result=40 11:21:50 Set A/D channel type result=40 11:21:50 Set A/D encoding result=40 11:21:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:50 Set channel filter=0.000000e+000 result=40 11:21:50 Config A/D Result=40 11:21:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:50 Get A/D filter: -9.255963e+061 result=40 11:21:50 Get A/D value=-858993460 result=40 11:21:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:50 Aux= 11:21:50 Message to Camera, serial 104276 queued 11:22:26 Received message from Master: op=PointingHead serial=104288 11:22:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:22:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:22:27 Point started: ret=0 11:22:27 point_skyscan result=0 11:22:27 Check angles 11:22:27 SkyScan query 11:22:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:22:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:22:28 Message to Master queued w/err=0: serial=104288 error=0 11:22:33 Received message from Master: op=Filter serial=104289 11:22:33 Color wheel filter change from 0 to 0 11:22:33 FLIGetFilterPos err=0 currentPosition=0 11:22:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:22:33 Filter is already there-color wheel unchanged 11:22:33 Received message from Master: op=Shutter serial=104290 11:22:33 Shutter LASER close 11:22:33 Received message from Camera: op=State serial=104292 11:22:33 GetSingleValue result=40 Value=cccccccc 11:22:33 SkyScan query 11:22:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:22:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:34 Parameters OK 11:22:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:34 Set A/D data flow result=40 11:22:34 Set A/D channel type result=40 11:22:34 Set A/D encoding result=40 11:22:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:34 Set channel filter=0.000000e+000 result=40 11:22:34 Config A/D Result=40 11:22:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:34 Get A/D filter: -9.255963e+061 result=40 11:22:34 Get A/D value=-858993460 result=40 11:22:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:34 Parameters OK 11:22:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:34 Set A/D data flow result=40 11:22:34 Set A/D channel type result=40 11:22:34 Set A/D encoding result=40 11:22:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:34 Set channel filter=0.000000e+000 result=40 11:22:34 Config A/D Result=40 11:22:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:34 Get A/D filter: -9.255963e+061 result=40 11:22:34 Get A/D value=-858993460 result=40 11:22:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:22:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:22:34 Aux= 11:22:34 Message to Camera, serial 104292 queued 11:23:11 Received message from Master: op=PointingHead serial=104305 11:23:11 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:23:11 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:23:11 Point started: ret=0 11:23:11 point_skyscan result=0 11:23:12 Check angles 11:23:12 SkyScan query 11:23:12 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 11:23:12 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 11:23:13 Check angles 11:23:13 SkyScan query 11:23:13 SkyScan query done: ret=0 az=154.14<-10276 ze=-6.51<-12434 Statuses=0009 0008 11:23:13 Msec=750 True Az=154.14 Ze=-6.51 Az status=0009 Ze status=0008 11:23:13 Check angles 11:23:13 SkyScan query 11:23:14 SkyScan query done: ret=0 az=171.525<-11435 ze=-6.495<-12433 Statuses=0009 0008 11:23:14 Msec=1500 True Az=171.525 Ze=-6.495 Az status=0009 Ze status=0008 11:23:14 Check angles 11:23:14 SkyScan query 11:23:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:23:15 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:23:15 Message to Master queued w/err=0: serial=104305 error=0 11:23:20 Received message from Master: op=Filter serial=104306 11:23:20 Color wheel filter change from 0 to 0 11:23:20 FLIGetFilterPos err=0 currentPosition=0 11:23:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:23:20 Filter is already there-color wheel unchanged 11:23:20 Received message from Master: op=Shutter serial=104307 11:23:20 Shutter LASER close 11:23:20 Received message from Camera: op=State serial=104309 11:23:20 GetSingleValue result=40 Value=cccccccc 11:23:20 SkyScan query 11:23:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:23:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:20 Parameters OK 11:23:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:20 Set A/D data flow result=40 11:23:20 Set A/D channel type result=40 11:23:20 Set A/D encoding result=40 11:23:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:20 Set channel filter=0.000000e+000 result=40 11:23:20 Config A/D Result=40 11:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:20 Get A/D filter: -9.255963e+061 result=40 11:23:20 Get A/D value=-858993460 result=40 11:23:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:20 Parameters OK 11:23:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:20 Set A/D data flow result=40 11:23:20 Set A/D channel type result=40 11:23:20 Set A/D encoding result=40 11:23:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:20 Set channel filter=0.000000e+000 result=40 11:23:20 Config A/D Result=40 11:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:20 Get A/D filter: -9.255963e+061 result=40 11:23:20 Get A/D value=-858993460 result=40 11:23:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:23:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:23:20 Aux= 11:23:20 Message to Camera, serial 104309 queued [UTC 2019-3-4 11:23:50] 11:23:57 Received message from Master: op=PointingHead serial=104322 11:23:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:23:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:23:58 Point started: ret=0 11:23:58 point_skyscan result=0 11:23:58 Check angles 11:23:58 SkyScan query 11:23:59 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 11:23:59 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 11:23:59 Check angles 11:23:59 SkyScan query 11:24:00 SkyScan query done: ret=0 az=135.285<-9019 ze=6.495<-11567 Statuses=0009 0008 11:24:00 Msec=750 True Az=135.285 Ze=6.495 Az status=0009 Ze status=0008 11:24:00 Check angles 11:24:00 SkyScan query 11:24:00 SkyScan query done: ret=0 az=117.9<-7860 ze=6.495<-11567 Statuses=0009 0008 11:24:00 Msec=1500 True Az=117.9 Ze=6.495 Az status=0009 Ze status=0008 11:24:01 Check angles 11:24:01 SkyScan query 11:24:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:24:01 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:24:01 Message to Master queued w/err=0: serial=104322 error=0 11:24:06 Received message from Master: op=Filter serial=104323 11:24:06 Color wheel filter change from 0 to 0 11:24:06 FLIGetFilterPos err=0 currentPosition=0 11:24:06 FLIGetStepsRemaining err=0 RemainingSteps=0 11:24:06 Filter is already there-color wheel unchanged 11:24:06 Received message from Master: op=Shutter serial=104324 11:24:06 Shutter LASER close 11:24:06 Received message from Camera: op=State serial=104326 11:24:06 GetSingleValue result=40 Value=cccccccc 11:24:06 SkyScan query 11:24:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:24:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:07 Parameters OK 11:24:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:07 Set A/D data flow result=40 11:24:07 Set A/D channel type result=40 11:24:07 Set A/D encoding result=40 11:24:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:07 Set channel filter=0.000000e+000 result=40 11:24:07 Config A/D Result=40 11:24:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:07 Get A/D filter: -9.255963e+061 result=40 11:24:07 Get A/D value=-858993460 result=40 11:24:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:07 Parameters OK 11:24:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:07 Set A/D data flow result=40 11:24:07 Set A/D channel type result=40 11:24:07 Set A/D encoding result=40 11:24:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:07 Set channel filter=0.000000e+000 result=40 11:24:07 Config A/D Result=40 11:24:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:07 Get A/D filter: -9.255963e+061 result=40 11:24:07 Get A/D value=-858993460 result=40 11:24:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:24:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:24:07 Aux= 11:24:07 Message to Camera, serial 104326 queued 11:24:44 Received message from Master: op=PointingHead serial=104339 11:24:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:24:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:24:44 Point started: ret=0 11:24:44 point_skyscan result=0 11:24:45 Check angles 11:24:45 SkyScan query 11:24:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 11:24:45 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 11:24:46 Check angles 11:24:46 SkyScan query 11:24:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 11:24:46 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 11:24:46 Check angles 11:24:46 SkyScan query 11:24:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.73<-16382 Statuses=0008 0009 11:24:47 Msec=1500 True Az=112.995 Ze=-65.73 Az status=0008 Ze status=0009 11:24:47 Check angles 11:24:47 SkyScan query 11:24:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 11:24:48 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 11:24:48 Check angles 11:24:48 SkyScan query 11:24:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.67<-19178 Statuses=0008 0009 11:24:48 Msec=3000 True Az=112.995 Ze=-107.67 Az status=0008 Ze status=0009 11:24:49 Check angles 11:24:49 SkyScan query 11:24:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.595<-20573 Statuses=0008 0009 11:24:49 Msec=3750 True Az=112.995 Ze=-128.595 Az status=0008 Ze status=0009 11:24:49 Check angles 11:24:49 SkyScan query 11:24:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.595<-21973 Statuses=0008 0009 11:24:50 Msec=4500 True Az=112.995 Ze=-149.595 Az status=0008 Ze status=0009 11:24:50 Check angles 11:24:50 SkyScan query 11:24:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.52<-23368 Statuses=0008 0009 11:24:51 Msec=5250 True Az=112.995 Ze=-170.52 Az status=0008 Ze status=0009 11:24:51 Check angles 11:24:51 SkyScan query 11:24:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:24:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:24:51 Message to Master queued w/err=0: serial=104339 error=0 11:24:56 Received message from Master: op=Filter serial=104340 11:24:56 Color wheel filter change from 0 to 0 11:24:56 FLIGetFilterPos err=0 currentPosition=0 11:24:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:24:56 Filter is already there-color wheel unchanged 11:24:57 Received message from Master: op=Shutter serial=104341 11:24:57 Shutter LASER open 11:24:57 Received message from Camera: op=State serial=104343 11:24:57 GetSingleValue result=40 Value=cccccccc 11:24:57 SkyScan query 11:24:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:24:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:57 Parameters OK 11:24:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:57 Set A/D data flow result=40 11:24:57 Set A/D channel type result=40 11:24:57 Set A/D encoding result=40 11:24:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:57 Set channel filter=0.000000e+000 result=40 11:24:57 Config A/D Result=40 11:24:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:57 Get A/D filter: -9.255963e+061 result=40 11:24:57 Get A/D value=-858993460 result=40 11:24:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:57 Parameters OK 11:24:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:57 Set A/D data flow result=40 11:24:57 Set A/D channel type result=40 11:24:57 Set A/D encoding result=40 11:24:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:57 Set channel filter=0.000000e+000 result=40 11:24:57 Config A/D Result=40 11:24:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:57 Get A/D filter: -9.255963e+061 result=40 11:24:57 Get A/D value=-858993460 result=40 11:24:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:24:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:24:57 Aux= 11:24:57 Message to Camera, serial 104343 queued 11:25:06 Received message from Master: op=Shutter serial=104353 11:25:06 Shutter LASER close 11:25:06 Received message from Master: op=PointingHead serial=104357 11:25:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:25:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:25:07 Point started: ret=0 11:25:07 point_skyscan result=0 11:25:07 Check angles 11:25:07 SkyScan query 11:25:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.74<-21516 Statuses=0008 0009 11:25:08 Msec=0 True Az=112.995 Ze=-142.74 Az status=0008 Ze status=0009 11:25:08 Check angles 11:25:08 SkyScan query 11:25:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.305<-20087 Statuses=0008 0009 11:25:09 Msec=750 True Az=112.995 Ze=-121.305 Az status=0008 Ze status=0009 11:25:09 Check angles 11:25:09 SkyScan query 11:25:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.335<-18689 Statuses=0008 0009 11:25:09 Msec=1500 True Az=112.995 Ze=-100.335 Az status=0008 Ze status=0009 11:25:10 Check angles 11:25:10 SkyScan query 11:25:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-78.96<-17264 Statuses=0008 0009 11:25:10 Msec=2250 True Az=112.995 Ze=-78.96 Az status=0008 Ze status=0009 11:25:10 Check angles 11:25:10 SkyScan query 11:25:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.615<-15841 Statuses=0008 0009 11:25:11 Msec=3000 True Az=112.995 Ze=-57.615 Az status=0008 Ze status=0009 11:25:11 Check angles 11:25:11 SkyScan query 11:25:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.165<-14411 Statuses=0008 0009 11:25:12 Msec=3750 True Az=112.995 Ze=-36.165 Az status=0008 Ze status=0009 11:25:12 Check angles 11:25:12 SkyScan query 11:25:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.225<-13015 Statuses=0008 0009 11:25:13 Msec=4500 True Az=112.995 Ze=-15.225 Az status=0008 Ze status=0009 11:25:13 Check angles 11:25:13 SkyScan query 11:25:13 SkyScan query done: ret=0 az=112.995<-7533 ze=5.31<-11646 Statuses=0008 0009 11:25:13 Msec=5250 True Az=112.995 Ze=5.31 Az status=0008 Ze status=0009 11:25:13 Check angles 11:25:13 SkyScan query 11:25:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:25:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:25:14 Message to Master queued w/err=0: serial=104357 error=0 11:25:19 Received message from Master: op=Filter serial=104358 11:25:19 Color wheel filter change from 0 to 0 11:25:19 FLIGetFilterPos err=0 currentPosition=0 11:25:19 FLIGetStepsRemaining err=0 RemainingSteps=0 11:25:19 Filter is already there-color wheel unchanged 11:25:19 Received message from Master: op=Shutter serial=104359 11:25:19 Shutter LASER close 11:25:19 Received message from Camera: op=State serial=104361 11:25:19 GetSingleValue result=40 Value=cccccccc 11:25:19 SkyScan query 11:25:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:25:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:20 Parameters OK 11:25:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:20 Set A/D data flow result=40 11:25:20 Set A/D channel type result=40 11:25:20 Set A/D encoding result=40 11:25:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:20 Set channel filter=0.000000e+000 result=40 11:25:20 Config A/D Result=40 11:25:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:20 Get A/D filter: -9.255963e+061 result=40 11:25:20 Get A/D value=-858993460 result=40 11:25:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:20 Parameters OK 11:25:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:20 Set A/D data flow result=40 11:25:20 Set A/D channel type result=40 11:25:20 Set A/D encoding result=40 11:25:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:20 Set channel filter=0.000000e+000 result=40 11:25:20 Config A/D Result=40 11:25:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:20 Get A/D filter: -9.255963e+061 result=40 11:25:20 Get A/D value=-858993460 result=40 11:25:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:25:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:25:20 Aux= 11:25:20 Message to Camera, serial 104361 queued 11:25:57 Received message from Master: op=PointingHead serial=104374 11:25:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:25:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:25:57 Point started: ret=0 11:25:57 point_skyscan result=0 11:25:58 Check angles 11:25:58 SkyScan query 11:25:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:25:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:25:58 Message to Master queued w/err=0: serial=104374 error=0 11:26:03 Received message from Master: op=Filter serial=104375 11:26:03 Color wheel filter change from 0 to 0 11:26:03 FLIGetFilterPos err=0 currentPosition=0 11:26:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:03 Filter is already there-color wheel unchanged 11:26:04 Received message from Master: op=Shutter serial=104376 11:26:04 Shutter LASER close 11:26:04 Received message from Camera: op=State serial=104378 11:26:04 GetSingleValue result=40 Value=cccccccc 11:26:04 SkyScan query 11:26:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:26:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:04 Parameters OK 11:26:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:04 Set A/D data flow result=40 11:26:04 Set A/D channel type result=40 11:26:04 Set A/D encoding result=40 11:26:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:04 Set channel filter=0.000000e+000 result=40 11:26:04 Config A/D Result=40 11:26:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:04 Get A/D filter: -9.255963e+061 result=40 11:26:04 Get A/D value=-858993460 result=40 11:26:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:04 Parameters OK 11:26:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:04 Set A/D data flow result=40 11:26:04 Set A/D channel type result=40 11:26:04 Set A/D encoding result=40 11:26:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:04 Set channel filter=0.000000e+000 result=40 11:26:04 Config A/D Result=40 11:26:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:04 Get A/D filter: -9.255963e+061 result=40 11:26:04 Get A/D value=-858993460 result=40 11:26:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:04 Aux= 11:26:04 Message to Camera, serial 104378 queued 11:26:41 Received message from Master: op=PointingHead serial=104391 11:26:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:26:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:26:41 Point started: ret=0 11:26:41 point_skyscan result=0 11:26:42 Check angles 11:26:42 SkyScan query 11:26:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:26:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:26:43 Message to Master queued w/err=0: serial=104391 error=0 11:26:48 Received message from Master: op=Filter serial=104392 11:26:48 Color wheel filter change from 0 to 0 11:26:48 FLIGetFilterPos err=0 currentPosition=0 11:26:48 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:48 Filter is already there-color wheel unchanged 11:26:48 Received message from Master: op=Shutter serial=104393 11:26:48 Shutter LASER close 11:26:48 Received message from Camera: op=State serial=104395 11:26:48 GetSingleValue result=40 Value=cccccccc 11:26:48 SkyScan query 11:26:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:26:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:49 Parameters OK 11:26:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:49 Set A/D data flow result=40 11:26:49 Set A/D channel type result=40 11:26:49 Set A/D encoding result=40 11:26:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:49 Set channel filter=0.000000e+000 result=40 11:26:49 Config A/D Result=40 11:26:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:49 Get A/D filter: -9.255963e+061 result=40 11:26:49 Get A/D value=-858993460 result=40 11:26:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:49 Parameters OK 11:26:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:49 Set A/D data flow result=40 11:26:49 Set A/D channel type result=40 11:26:49 Set A/D encoding result=40 11:26:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:49 Set channel filter=0.000000e+000 result=40 11:26:49 Config A/D Result=40 11:26:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:49 Get A/D filter: -9.255963e+061 result=40 11:26:49 Get A/D value=-858993460 result=40 11:26:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:49 Aux= 11:26:49 Message to Camera, serial 104395 queued 11:27:24 Received message from Master: op=PointingHead serial=104407 11:27:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:27:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:27:25 Point started: ret=0 11:27:25 point_skyscan result=0 11:27:26 Check angles 11:27:26 SkyScan query 11:27:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:27:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:27:26 Message to Master queued w/err=0: serial=104407 error=0 11:27:31 Received message from Master: op=Filter serial=104408 11:27:31 Color wheel filter change from 0 to 0 11:27:31 FLIGetFilterPos err=0 currentPosition=0 11:27:31 FLIGetStepsRemaining err=0 RemainingSteps=0 11:27:31 Filter is already there-color wheel unchanged 11:27:31 Received message from Master: op=Shutter serial=104409 11:27:31 Shutter LASER close 11:27:31 Received message from Camera: op=State serial=104411 11:27:31 GetSingleValue result=40 Value=cccccccc 11:27:31 SkyScan query 11:27:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:27:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:32 Parameters OK 11:27:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:32 Set A/D data flow result=40 11:27:32 Set A/D channel type result=40 11:27:32 Set A/D encoding result=40 11:27:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:32 Set channel filter=0.000000e+000 result=40 11:27:32 Config A/D Result=40 11:27:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:32 Get A/D filter: -9.255963e+061 result=40 11:27:32 Get A/D value=-858993460 result=40 11:27:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:32 Parameters OK 11:27:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:32 Set A/D data flow result=40 11:27:32 Set A/D channel type result=40 11:27:32 Set A/D encoding result=40 11:27:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:32 Set channel filter=0.000000e+000 result=40 11:27:32 Config A/D Result=40 11:27:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:32 Get A/D filter: -9.255963e+061 result=40 11:27:32 Get A/D value=-858993460 result=40 11:27:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:27:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:27:32 Aux= 11:27:32 Message to Camera, serial 104411 queued 11:28:09 Received message from Master: op=PointingHead serial=104424 11:28:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:28:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:28:09 Point started: ret=0 11:28:09 point_skyscan result=0 11:28:10 Check angles 11:28:10 SkyScan query 11:28:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.745<-13583 Statuses=0008 0009 11:28:10 Msec=0 True Az=112.995 Ze=-23.745 Az status=0008 Ze status=0009 11:28:11 Check angles 11:28:11 SkyScan query 11:28:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 11:28:11 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 11:28:11 Check angles 11:28:11 SkyScan query 11:28:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.625<-16375 Statuses=0008 0009 11:28:12 Msec=1500 True Az=112.995 Ze=-65.625 Az status=0008 Ze status=0009 11:28:12 Check angles 11:28:12 SkyScan query 11:28:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.76<-17784 Statuses=0008 0009 11:28:13 Msec=2250 True Az=112.995 Ze=-86.76 Az status=0008 Ze status=0009 11:28:13 Check angles 11:28:13 SkyScan query 11:28:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.55<-19170 Statuses=0008 0009 11:28:13 Msec=3000 True Az=112.995 Ze=-107.55 Az status=0008 Ze status=0009 11:28:14 Check angles 11:28:14 SkyScan query 11:28:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.49<-20566 Statuses=0008 0009 11:28:14 Msec=3750 True Az=112.995 Ze=-128.49 Az status=0008 Ze status=0009 11:28:14 Check angles 11:28:14 SkyScan query 11:28:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.505<-21967 Statuses=0008 0009 11:28:15 Msec=4500 True Az=112.995 Ze=-149.505 Az status=0008 Ze status=0009 11:28:15 Check angles 11:28:15 SkyScan query 11:28:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.43<-23362 Statuses=0008 0009 11:28:16 Msec=5250 True Az=112.995 Ze=-170.43 Az status=0008 Ze status=0009 11:28:16 Check angles 11:28:16 SkyScan query 11:28:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:28:16 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:28:16 Message to Master queued w/err=0: serial=104424 error=0 11:28:21 Received message from Master: op=Filter serial=104425 11:28:21 Color wheel filter change from 0 to 0 11:28:21 FLIGetFilterPos err=0 currentPosition=0 11:28:21 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:21 Filter is already there-color wheel unchanged 11:28:22 Received message from Master: op=Shutter serial=104426 11:28:22 Shutter LASER open 11:28:22 Received message from Camera: op=State serial=104428 11:28:22 GetSingleValue result=40 Value=cccccccc 11:28:22 SkyScan query 11:28:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:28:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:22 Parameters OK 11:28:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:22 Set A/D data flow result=40 11:28:22 Set A/D channel type result=40 11:28:22 Set A/D encoding result=40 11:28:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:22 Set channel filter=0.000000e+000 result=40 11:28:22 Config A/D Result=40 11:28:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:22 Get A/D filter: -9.255963e+061 result=40 11:28:22 Get A/D value=-858993460 result=40 11:28:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:22 Parameters OK 11:28:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:22 Set A/D data flow result=40 11:28:22 Set A/D channel type result=40 11:28:22 Set A/D encoding result=40 11:28:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:22 Set channel filter=0.000000e+000 result=40 11:28:22 Config A/D Result=40 11:28:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:22 Get A/D filter: -9.255963e+061 result=40 11:28:22 Get A/D value=-858993460 result=40 11:28:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:22 Aux= 11:28:22 Message to Camera, serial 104428 queued 11:28:31 Received message from Master: op=Shutter serial=104438 11:28:31 Shutter LASER close 11:28:31 Received message from Master: op=PointingHead serial=104442 11:28:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:28:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:28:32 Point started: ret=0 11:28:32 point_skyscan result=0 11:28:32 Check angles 11:28:32 SkyScan query 11:28:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.725<-21515 Statuses=0008 0009 11:28:33 Msec=0 True Az=112.995 Ze=-142.725 Az status=0008 Ze status=0009 11:28:33 Check angles 11:28:33 SkyScan query 11:28:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.74<-20116 Statuses=0008 0009 11:28:34 Msec=750 True Az=112.995 Ze=-121.74 Az status=0008 Ze status=0009 11:28:34 Check angles 11:28:34 SkyScan query 11:28:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.815<-18721 Statuses=0008 0009 11:28:35 Msec=1500 True Az=112.995 Ze=-100.815 Az status=0008 Ze status=0009 11:28:35 Check angles 11:28:35 SkyScan query 11:28:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.845<-17323 Statuses=0008 0009 11:28:35 Msec=2250 True Az=112.995 Ze=-79.845 Az status=0008 Ze status=0009 11:28:35 Check angles 11:28:35 SkyScan query 11:28:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.905<-15927 Statuses=0008 0009 11:28:36 Msec=3000 True Az=112.995 Ze=-58.905 Az status=0008 Ze status=0009 11:28:36 Check angles 11:28:36 SkyScan query 11:28:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.905<-14527 Statuses=0008 0009 11:28:37 Msec=3750 True Az=112.995 Ze=-37.905 Az status=0008 Ze status=0009 11:28:37 Check angles 11:28:37 SkyScan query 11:28:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.965<-13131 Statuses=0008 0009 11:28:38 Msec=4500 True Az=112.995 Ze=-16.965 Az status=0008 Ze status=0009 11:28:38 Check angles 11:28:38 SkyScan query 11:28:38 SkyScan query done: ret=0 az=112.995<-7533 ze=3.99<-11734 Statuses=0008 0009 11:28:38 Msec=5250 True Az=112.995 Ze=3.99 Az status=0008 Ze status=0009 11:28:38 Check angles 11:28:38 SkyScan query 11:28:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:28:39 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:28:39 Message to Master queued w/err=0: serial=104442 error=0 11:28:44 Received message from Master: op=Filter serial=104443 11:28:44 Color wheel filter change from 0 to 0 11:28:44 FLIGetFilterPos err=0 currentPosition=0 11:28:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:44 Filter is already there-color wheel unchanged 11:28:44 Received message from Master: op=Shutter serial=104444 11:28:44 Shutter LASER close 11:28:44 Received message from Camera: op=State serial=104446 11:28:44 GetSingleValue result=40 Value=cccccccc 11:28:44 SkyScan query 11:28:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:28:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:45 Parameters OK 11:28:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:45 Set A/D data flow result=40 11:28:45 Set A/D channel type result=40 11:28:45 Set A/D encoding result=40 11:28:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:45 Set channel filter=0.000000e+000 result=40 11:28:45 Config A/D Result=40 11:28:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:45 Get A/D filter: -9.255963e+061 result=40 11:28:45 Get A/D value=-858993460 result=40 11:28:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:45 Parameters OK 11:28:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:45 Set A/D data flow result=40 11:28:45 Set A/D channel type result=40 11:28:45 Set A/D encoding result=40 11:28:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:45 Set channel filter=0.000000e+000 result=40 11:28:45 Config A/D Result=40 11:28:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:45 Get A/D filter: -9.255963e+061 result=40 11:28:45 Get A/D value=-858993460 result=40 11:28:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:45 Aux= 11:28:45 Message to Camera, serial 104446 queued 11:29:22 Received message from Master: op=PointingHead serial=104459 11:29:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:29:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:29:22 Point started: ret=0 11:29:22 point_skyscan result=0 11:29:23 Check angles 11:29:23 SkyScan query 11:29:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:29:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:29:23 Message to Master queued w/err=0: serial=104459 error=0 11:29:28 Received message from Master: op=Filter serial=104460 11:29:28 Color wheel filter change from 0 to 0 11:29:28 FLIGetFilterPos err=0 currentPosition=0 11:29:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:29:28 Filter is already there-color wheel unchanged 11:29:29 Received message from Master: op=Shutter serial=104461 11:29:29 Shutter LASER close 11:29:29 Received message from Camera: op=State serial=104463 11:29:29 GetSingleValue result=40 Value=cccccccc 11:29:29 SkyScan query 11:29:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:29:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:29 Parameters OK 11:29:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:29 Set A/D data flow result=40 11:29:29 Set A/D channel type result=40 11:29:29 Set A/D encoding result=40 11:29:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:29 Set channel filter=0.000000e+000 result=40 11:29:29 Config A/D Result=40 11:29:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:29 Get A/D filter: -9.255963e+061 result=40 11:29:29 Get A/D value=-858993460 result=40 11:29:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:29 Parameters OK 11:29:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:29 Set A/D data flow result=40 11:29:29 Set A/D channel type result=40 11:29:29 Set A/D encoding result=40 11:29:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:29 Set channel filter=0.000000e+000 result=40 11:29:29 Config A/D Result=40 11:29:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:29 Get A/D filter: -9.255963e+061 result=40 11:29:29 Get A/D value=-858993460 result=40 11:29:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:29:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:29:29 Aux= 11:29:29 Message to Camera, serial 104463 queued 11:30:05 Received message from Master: op=PointingHead serial=104475 11:30:05 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:30:05 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:30:05 Point started: ret=0 11:30:05 point_skyscan result=0 11:30:06 Check angles 11:30:06 SkyScan query 11:30:07 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 11:30:07 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 11:30:07 Check angles 11:30:07 SkyScan query 11:30:08 SkyScan query done: ret=0 az=153.345<-10223 ze=-6.51<-12434 Statuses=0009 0008 11:30:08 Msec=750 True Az=153.345 Ze=-6.51 Az status=0009 Ze status=0008 11:30:08 Check angles 11:30:08 SkyScan query 11:30:08 SkyScan query done: ret=0 az=170.835<-11389 ze=-6.495<-12433 Statuses=0009 0008 11:30:08 Msec=1500 True Az=170.835 Ze=-6.495 Az status=0009 Ze status=0008 11:30:08 Check angles 11:30:08 SkyScan query 11:30:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:30:09 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:30:09 Message to Master queued w/err=0: serial=104475 error=0 11:30:14 Received message from Master: op=Filter serial=104476 11:30:14 Color wheel filter change from 0 to 0 11:30:14 FLIGetFilterPos err=0 currentPosition=0 11:30:14 FLIGetStepsRemaining err=0 RemainingSteps=0 11:30:14 Filter is already there-color wheel unchanged 11:30:14 Received message from Master: op=Shutter serial=104477 11:30:14 Shutter LASER close 11:30:14 Received message from Camera: op=State serial=104479 11:30:14 GetSingleValue result=40 Value=cccccccc 11:30:14 SkyScan query 11:30:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:30:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:15 Parameters OK 11:30:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:15 Set A/D data flow result=40 11:30:15 Set A/D channel type result=40 11:30:15 Set A/D encoding result=40 11:30:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:15 Set channel filter=0.000000e+000 result=40 11:30:15 Config A/D Result=40 11:30:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:15 Get A/D filter: -9.255963e+061 result=40 11:30:15 Get A/D value=-858993460 result=40 11:30:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:15 Parameters OK 11:30:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:15 Set A/D data flow result=40 11:30:15 Set A/D channel type result=40 11:30:15 Set A/D encoding result=40 11:30:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:15 Set channel filter=0.000000e+000 result=40 11:30:15 Config A/D Result=40 11:30:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:15 Get A/D filter: -9.255963e+061 result=40 11:30:15 Get A/D value=-858993460 result=40 11:30:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:30:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:30:15 Aux= 11:30:15 Message to Camera, serial 104479 queued 11:30:51 Received message from Master: op=PointingHead serial=104491 11:30:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:30:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:30:51 Point started: ret=0 11:30:51 point_skyscan result=0 11:30:52 Check angles 11:30:52 SkyScan query 11:30:52 SkyScan query done: ret=0 az=152.925<-10195 ze=6.51<-11566 Statuses=0009 0008 11:30:52 Msec=0 True Az=152.925 Ze=6.51 Az status=0009 Ze status=0008 11:30:53 Check angles 11:30:53 SkyScan query 11:30:53 SkyScan query done: ret=0 az=135.57<-9038 ze=6.495<-11567 Statuses=0009 0008 11:30:53 Msec=750 True Az=135.57 Ze=6.495 Az status=0009 Ze status=0008 11:30:53 Check angles 11:30:53 SkyScan query 11:30:54 SkyScan query done: ret=0 az=118.11<-7874 ze=6.495<-11567 Statuses=0009 0008 11:30:54 Msec=1500 True Az=118.11 Ze=6.495 Az status=0009 Ze status=0008 11:30:54 Check angles 11:30:54 SkyScan query 11:30:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:30:55 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:30:55 Message to Master queued w/err=0: serial=104491 error=0 11:31:00 Received message from Master: op=Filter serial=104492 11:31:00 Color wheel filter change from 0 to 0 11:31:00 FLIGetFilterPos err=0 currentPosition=0 11:31:00 FLIGetStepsRemaining err=0 RemainingSteps=0 11:31:00 Filter is already there-color wheel unchanged 11:31:00 Received message from Master: op=Shutter serial=104493 11:31:00 Shutter LASER close 11:31:00 Received message from Camera: op=State serial=104495 11:31:00 GetSingleValue result=40 Value=cccccccc 11:31:00 SkyScan query 11:31:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:31:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:00 Parameters OK 11:31:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:00 Set A/D data flow result=40 11:31:00 Set A/D channel type result=40 11:31:00 Set A/D encoding result=40 11:31:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:00 Set channel filter=0.000000e+000 result=40 11:31:00 Config A/D Result=40 11:31:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:00 Get A/D filter: -9.255963e+061 result=40 11:31:00 Get A/D value=-858993460 result=40 11:31:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:00 Parameters OK 11:31:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:00 Set A/D data flow result=40 11:31:00 Set A/D channel type result=40 11:31:00 Set A/D encoding result=40 11:31:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:00 Set channel filter=0.000000e+000 result=40 11:31:00 Config A/D Result=40 11:31:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:00 Get A/D filter: -9.255963e+061 result=40 11:31:00 Get A/D value=-858993460 result=40 11:31:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:31:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:31:00 Aux= 11:31:00 Message to Camera, serial 104495 queued 11:31:37 Received message from Master: op=PointingHead serial=104508 11:31:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:31:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:31:38 Point started: ret=0 11:31:38 point_skyscan result=0 11:31:38 Check angles 11:31:38 SkyScan query 11:31:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 11:31:39 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 11:31:39 Check angles 11:31:39 SkyScan query 11:31:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.325<-14955 Statuses=0008 0009 11:31:40 Msec=750 True Az=112.995 Ze=-44.325 Az status=0008 Ze status=0009 11:31:40 Check angles 11:31:40 SkyScan query 11:31:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.265<-16351 Statuses=0008 0009 11:31:40 Msec=1500 True Az=112.995 Ze=-65.265 Az status=0008 Ze status=0009 11:31:41 Check angles 11:31:41 SkyScan query 11:31:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.205<-17747 Statuses=0008 0009 11:31:41 Msec=2250 True Az=112.995 Ze=-86.205 Az status=0008 Ze status=0009 11:31:41 Check angles 11:31:41 SkyScan query 11:31:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.145<-19143 Statuses=0008 0009 11:31:42 Msec=3000 True Az=112.995 Ze=-107.145 Az status=0008 Ze status=0009 11:31:42 Check angles 11:31:42 SkyScan query 11:31:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.13<-20542 Statuses=0008 0009 11:31:43 Msec=3750 True Az=112.995 Ze=-128.13 Az status=0008 Ze status=0009 11:31:43 Check angles 11:31:43 SkyScan query 11:31:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.1<-21940 Statuses=0008 0009 11:31:43 Msec=4500 True Az=112.995 Ze=-149.1 Az status=0008 Ze status=0009 11:31:44 Check angles 11:31:44 SkyScan query 11:31:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.025<-23335 Statuses=0008 0009 11:31:44 Msec=5250 True Az=112.995 Ze=-170.025 Az status=0008 Ze status=0009 11:31:44 Check angles 11:31:44 SkyScan query 11:31:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:31:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:31:45 Message to Master queued w/err=0: serial=104508 error=0 11:31:50 Received message from Master: op=Filter serial=104509 11:31:50 Color wheel filter change from 0 to 0 11:31:50 FLIGetFilterPos err=0 currentPosition=0 11:31:50 FLIGetStepsRemaining err=0 RemainingSteps=0 11:31:50 Filter is already there-color wheel unchanged 11:31:50 Received message from Master: op=Shutter serial=104510 11:31:50 Shutter LASER open 11:31:50 Received message from Camera: op=State serial=104512 11:31:50 GetSingleValue result=40 Value=cccccccc 11:31:50 SkyScan query 11:31:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:31:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:51 Parameters OK 11:31:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:51 Set A/D data flow result=40 11:31:51 Set A/D channel type result=40 11:31:51 Set A/D encoding result=40 11:31:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:51 Set channel filter=0.000000e+000 result=40 11:31:51 Config A/D Result=40 11:31:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:51 Get A/D filter: -9.255963e+061 result=40 11:31:51 Get A/D value=-858993460 result=40 11:31:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:51 Parameters OK 11:31:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:51 Set A/D data flow result=40 11:31:51 Set A/D channel type result=40 11:31:51 Set A/D encoding result=40 11:31:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:51 Set channel filter=0.000000e+000 result=40 11:31:51 Config A/D Result=40 11:31:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:51 Get A/D filter: -9.255963e+061 result=40 11:31:51 Get A/D value=-858993460 result=40 11:31:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:31:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:31:51 Aux= 11:31:51 Message to Camera, serial 104512 queued 11:31:59 Received message from Master: op=Shutter serial=104522 11:31:59 Shutter LASER close 11:32:00 Received message from Master: op=PointingHead serial=104526 11:32:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:32:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:32:00 Point started: ret=0 11:32:00 point_skyscan result=0 11:32:01 Check angles 11:32:01 SkyScan query 11:32:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.01<-21534 Statuses=0008 0009 11:32:01 Msec=0 True Az=112.995 Ze=-143.01 Az status=0008 Ze status=0009 11:32:02 Check angles 11:32:02 SkyScan query 11:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.59<-20106 Statuses=0008 0009 11:32:02 Msec=750 True Az=112.995 Ze=-121.59 Az status=0008 Ze status=0009 11:32:02 Check angles 11:32:02 SkyScan query 11:32:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.65<-18710 Statuses=0008 0009 11:32:03 Msec=1500 True Az=112.995 Ze=-100.65 Az status=0008 Ze status=0009 11:32:03 Check angles 11:32:03 SkyScan query 11:32:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.65<-17310 Statuses=0008 0009 11:32:04 Msec=2250 True Az=112.995 Ze=-79.65 Az status=0008 Ze status=0009 11:32:04 Check angles 11:32:04 SkyScan query 11:32:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 11:32:04 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 11:32:05 Check angles 11:32:05 SkyScan query 11:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.74<-14516 Statuses=0008 0009 11:32:05 Msec=3750 True Az=112.995 Ze=-37.74 Az status=0008 Ze status=0009 11:32:05 Check angles 11:32:05 SkyScan query 11:32:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.8<-13120 Statuses=0008 0009 11:32:06 Msec=4500 True Az=112.995 Ze=-16.8 Az status=0008 Ze status=0009 11:32:06 Check angles 11:32:06 SkyScan query 11:32:07 SkyScan query done: ret=0 az=112.995<-7533 ze=4.125<-11725 Statuses=0008 0009 11:32:07 Msec=5250 True Az=112.995 Ze=4.125 Az status=0008 Ze status=0009 11:32:07 Check angles 11:32:07 SkyScan query 11:32:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:32:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:32:07 Message to Master queued w/err=0: serial=104526 error=0 11:32:12 Received message from Master: op=Filter serial=104527 11:32:12 Color wheel filter change from 0 to 0 11:32:12 FLIGetFilterPos err=0 currentPosition=0 11:32:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:32:12 Filter is already there-color wheel unchanged 11:32:13 Received message from Master: op=Shutter serial=104528 11:32:13 Shutter LASER close 11:32:13 Received message from Camera: op=State serial=104530 11:32:13 GetSingleValue result=40 Value=cccccccc 11:32:13 SkyScan query 11:32:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:32:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:13 Parameters OK 11:32:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:13 Set A/D data flow result=40 11:32:13 Set A/D channel type result=40 11:32:13 Set A/D encoding result=40 11:32:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:13 Set channel filter=0.000000e+000 result=40 11:32:13 Config A/D Result=40 11:32:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:13 Get A/D filter: -9.255963e+061 result=40 11:32:13 Get A/D value=-858993460 result=40 11:32:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:13 Parameters OK 11:32:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:13 Set A/D data flow result=40 11:32:13 Set A/D channel type result=40 11:32:13 Set A/D encoding result=40 11:32:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:13 Set channel filter=0.000000e+000 result=40 11:32:13 Config A/D Result=40 11:32:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:13 Get A/D filter: -9.255963e+061 result=40 11:32:13 Get A/D value=-858993460 result=40 11:32:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:32:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:32:13 Aux= 11:32:13 Message to Camera, serial 104530 queued 11:32:50 Received message from Master: op=PointingHead serial=104543 11:32:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:32:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:32:51 Point started: ret=0 11:32:51 point_skyscan result=0 11:32:51 Check angles 11:32:51 SkyScan query 11:32:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:32:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:32:52 Message to Master queued w/err=0: serial=104543 error=0 11:32:57 Received message from Master: op=Filter serial=104544 11:32:57 Color wheel filter change from 0 to 0 11:32:57 FLIGetFilterPos err=0 currentPosition=0 11:32:57 FLIGetStepsRemaining err=0 RemainingSteps=0 11:32:57 Filter is already there-color wheel unchanged 11:32:57 Received message from Master: op=Shutter serial=104545 11:32:57 Shutter LASER close 11:32:57 Received message from Camera: op=State serial=104547 11:32:57 GetSingleValue result=40 Value=cccccccc 11:32:57 SkyScan query 11:32:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:32:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:58 Parameters OK 11:32:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:58 Set A/D data flow result=40 11:32:58 Set A/D channel type result=40 11:32:58 Set A/D encoding result=40 11:32:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:58 Set channel filter=0.000000e+000 result=40 11:32:58 Config A/D Result=40 11:32:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:58 Get A/D filter: -9.255963e+061 result=40 11:32:58 Get A/D value=-858993460 result=40 11:32:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:58 Parameters OK 11:32:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:58 Set A/D data flow result=40 11:32:58 Set A/D channel type result=40 11:32:58 Set A/D encoding result=40 11:32:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:58 Set channel filter=0.000000e+000 result=40 11:32:58 Config A/D Result=40 11:32:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:58 Get A/D filter: -9.255963e+061 result=40 11:32:58 Get A/D value=-858993460 result=40 11:32:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:32:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:32:58 Aux= 11:32:58 Message to Camera, serial 104547 queued 11:33:34 Received message from Master: op=PointingHead serial=104560 11:33:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:33:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:33:35 Point started: ret=0 11:33:35 point_skyscan result=0 11:33:36 Check angles 11:33:36 SkyScan query 11:33:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:33:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:33:36 Message to Master queued w/err=0: serial=104560 error=0 11:33:38 Received message from Master: op=Identify serial=104561 11:33:41 Received message from Master: op=Filter serial=104564 11:33:41 Color wheel filter change from 0 to 0 11:33:41 FLIGetFilterPos err=0 currentPosition=0 11:33:41 FLIGetStepsRemaining err=0 RemainingSteps=0 11:33:41 Filter is already there-color wheel unchanged 11:33:41 Received message from Master: op=Shutter serial=104565 11:33:41 Shutter LASER close 11:33:41 Received message from Camera: op=State serial=104567 11:33:41 GetSingleValue result=40 Value=cccccccc 11:33:41 SkyScan query 11:33:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:33:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:42 Parameters OK 11:33:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:42 Set A/D data flow result=40 11:33:42 Set A/D channel type result=40 11:33:42 Set A/D encoding result=40 11:33:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:42 Set channel filter=0.000000e+000 result=40 11:33:42 Config A/D Result=40 11:33:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:42 Get A/D filter: -9.255963e+061 result=40 11:33:42 Get A/D value=-858993460 result=40 11:33:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:42 Parameters OK 11:33:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:42 Set A/D data flow result=40 11:33:42 Set A/D channel type result=40 11:33:42 Set A/D encoding result=40 11:33:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:42 Set channel filter=0.000000e+000 result=40 11:33:42 Config A/D Result=40 11:33:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:42 Get A/D filter: -9.255963e+061 result=40 11:33:42 Get A/D value=-858993460 result=40 11:33:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:33:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:33:42 Aux= [UTC 2019-3-4 11:33:42] 11:33:42 Message to Camera, serial 104567 queued 11:34:19 Received message from Master: op=PointingHead serial=104580 11:34:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:34:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:34:19 Point started: ret=0 11:34:19 point_skyscan result=0 11:34:20 Check angles 11:34:20 SkyScan query 11:34:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:34:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:34:20 Message to Master queued w/err=0: serial=104580 error=0 11:34:25 Received message from Master: op=Filter serial=104581 11:34:25 Color wheel filter change from 0 to 0 11:34:25 FLIGetFilterPos err=0 currentPosition=0 11:34:25 FLIGetStepsRemaining err=0 RemainingSteps=0 11:34:25 Filter is already there-color wheel unchanged 11:34:26 Received message from Master: op=Shutter serial=104582 11:34:26 Shutter LASER close 11:34:26 Received message from Camera: op=State serial=104584 11:34:26 GetSingleValue result=40 Value=cccccccc 11:34:26 SkyScan query 11:34:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:34:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:26 Parameters OK 11:34:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:26 Set A/D data flow result=40 11:34:26 Set A/D channel type result=40 11:34:26 Set A/D encoding result=40 11:34:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:26 Set channel filter=0.000000e+000 result=40 11:34:26 Config A/D Result=40 11:34:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:26 Get A/D filter: -9.255963e+061 result=40 11:34:26 Get A/D value=-858993460 result=40 11:34:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:26 Parameters OK 11:34:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:26 Set A/D data flow result=40 11:34:26 Set A/D channel type result=40 11:34:26 Set A/D encoding result=40 11:34:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:26 Set channel filter=0.000000e+000 result=40 11:34:26 Config A/D Result=40 11:34:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:26 Get A/D filter: -9.255963e+061 result=40 11:34:26 Get A/D value=-858993460 result=40 11:34:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:34:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:34:26 Aux= 11:34:26 Message to Camera, serial 104584 queued 11:35:03 Received message from Master: op=PointingHead serial=104597 11:35:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:35:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:35:03 Point started: ret=0 11:35:03 point_skyscan result=0 11:35:04 Check angles 11:35:04 SkyScan query 11:35:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.01<-13534 Statuses=0008 0009 11:35:05 Msec=0 True Az=112.995 Ze=-23.01 Az status=0008 Ze status=0009 11:35:05 Check angles 11:35:05 SkyScan query 11:35:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.995<-14933 Statuses=0008 0009 11:35:05 Msec=750 True Az=112.995 Ze=-43.995 Az status=0008 Ze status=0009 11:35:06 Check angles 11:35:06 SkyScan query 11:35:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.325<-16355 Statuses=0008 0009 11:35:06 Msec=1500 True Az=112.995 Ze=-65.325 Az status=0008 Ze status=0009 11:35:06 Check angles 11:35:06 SkyScan query 11:35:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.295<-17753 Statuses=0008 0009 11:35:07 Msec=2250 True Az=112.995 Ze=-86.295 Az status=0008 Ze status=0009 11:35:07 Check angles 11:35:07 SkyScan query 11:35:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.235<-19149 Statuses=0008 0009 11:35:08 Msec=3000 True Az=112.995 Ze=-107.235 Az status=0008 Ze status=0009 11:35:08 Check angles 11:35:08 SkyScan query 11:35:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.205<-20547 Statuses=0008 0009 11:35:08 Msec=3750 True Az=112.995 Ze=-128.205 Az status=0008 Ze status=0009 11:35:09 Check angles 11:35:09 SkyScan query 11:35:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.625<-21975 Statuses=0008 0009 11:35:09 Msec=4500 True Az=112.995 Ze=-149.625 Az status=0008 Ze status=0009 11:35:09 Check angles 11:35:09 SkyScan query 11:35:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.565<-23371 Statuses=0008 0009 11:35:10 Msec=5250 True Az=112.995 Ze=-170.565 Az status=0008 Ze status=0009 11:35:10 Check angles 11:35:10 SkyScan query 11:35:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:35:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:35:11 Message to Master queued w/err=0: serial=104597 error=0 11:35:16 Received message from Master: op=Filter serial=104598 11:35:16 Color wheel filter change from 0 to 0 11:35:16 FLIGetFilterPos err=0 currentPosition=0 11:35:16 FLIGetStepsRemaining err=0 RemainingSteps=0 11:35:16 Filter is already there-color wheel unchanged 11:35:16 Received message from Master: op=Shutter serial=104599 11:35:16 Shutter LASER open 11:35:16 Received message from Camera: op=State serial=104601 11:35:16 GetSingleValue result=40 Value=cccccccc 11:35:16 SkyScan query 11:35:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:35:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:17 Parameters OK 11:35:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:17 Set A/D data flow result=40 11:35:17 Set A/D channel type result=40 11:35:17 Set A/D encoding result=40 11:35:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:17 Set channel filter=0.000000e+000 result=40 11:35:17 Config A/D Result=40 11:35:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:17 Get A/D filter: -9.255963e+061 result=40 11:35:17 Get A/D value=-858993460 result=40 11:35:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:17 Parameters OK 11:35:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:17 Set A/D data flow result=40 11:35:17 Set A/D channel type result=40 11:35:17 Set A/D encoding result=40 11:35:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:17 Set channel filter=0.000000e+000 result=40 11:35:17 Config A/D Result=40 11:35:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:17 Get A/D filter: -9.255963e+061 result=40 11:35:17 Get A/D value=-858993460 result=40 11:35:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:35:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:35:17 Aux= 11:35:17 Message to Camera, serial 104601 queued 11:35:25 Received message from Master: op=Shutter serial=104611 11:35:25 Shutter LASER close 11:35:26 Received message from Master: op=PointingHead serial=104615 11:35:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:35:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:35:26 Point started: ret=0 11:35:26 point_skyscan result=0 11:35:27 Check angles 11:35:27 SkyScan query 11:35:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 11:35:27 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 11:35:28 Check angles 11:35:28 SkyScan query 11:35:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.22<-20148 Statuses=0008 0009 11:35:28 Msec=750 True Az=112.995 Ze=-122.22 Az status=0008 Ze status=0009 11:35:28 Check angles 11:35:28 SkyScan query 11:35:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.295<-18753 Statuses=0008 0009 11:35:29 Msec=1500 True Az=112.995 Ze=-101.295 Az status=0008 Ze status=0009 11:35:29 Check angles 11:35:29 SkyScan query 11:35:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.31<-17354 Statuses=0008 0009 11:35:30 Msec=2250 True Az=112.995 Ze=-80.31 Az status=0008 Ze status=0009 11:35:30 Check angles 11:35:30 SkyScan query 11:35:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.37<-15958 Statuses=0008 0009 11:35:30 Msec=3000 True Az=112.995 Ze=-59.37 Az status=0008 Ze status=0009 11:35:31 Check angles 11:35:31 SkyScan query 11:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.905<-14527 Statuses=0008 0009 11:35:31 Msec=3750 True Az=112.995 Ze=-37.905 Az status=0008 Ze status=0009 11:35:31 Check angles 11:35:31 SkyScan query 11:35:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.98<-13132 Statuses=0008 0009 11:35:32 Msec=4500 True Az=112.995 Ze=-16.98 Az status=0008 Ze status=0009 11:35:32 Check angles 11:35:32 SkyScan query 11:35:33 SkyScan query done: ret=0 az=112.995<-7533 ze=3.975<-11735 Statuses=0008 0009 11:35:33 Msec=5250 True Az=112.995 Ze=3.975 Az status=0008 Ze status=0009 11:35:33 Check angles 11:35:33 SkyScan query 11:35:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:35:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:35:33 Message to Master queued w/err=0: serial=104615 error=0 11:35:38 Received message from Master: op=Filter serial=104616 11:35:38 Color wheel filter change from 0 to 0 11:35:38 FLIGetFilterPos err=0 currentPosition=0 11:35:38 FLIGetStepsRemaining err=0 RemainingSteps=0 11:35:38 Filter is already there-color wheel unchanged 11:35:39 Received message from Master: op=Shutter serial=104617 11:35:39 Shutter LASER close 11:35:39 Received message from Camera: op=State serial=104619 11:35:39 GetSingleValue result=40 Value=cccccccc 11:35:39 SkyScan query 11:35:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:35:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:39 Parameters OK 11:35:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:39 Set A/D data flow result=40 11:35:39 Set A/D channel type result=40 11:35:39 Set A/D encoding result=40 11:35:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:39 Set channel filter=0.000000e+000 result=40 11:35:39 Config A/D Result=40 11:35:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:39 Get A/D filter: -9.255963e+061 result=40 11:35:39 Get A/D value=-858993460 result=40 11:35:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:39 Parameters OK 11:35:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:39 Set A/D data flow result=40 11:35:39 Set A/D channel type result=40 11:35:39 Set A/D encoding result=40 11:35:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:39 Set channel filter=0.000000e+000 result=40 11:35:39 Config A/D Result=40 11:35:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:39 Get A/D filter: -9.255963e+061 result=40 11:35:39 Get A/D value=-858993460 result=40 11:35:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:35:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:35:39 Aux= 11:35:39 Message to Camera, serial 104619 queued 11:36:15 Received message from Master: op=PointingHead serial=104631 11:36:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:36:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:36:16 Point started: ret=0 11:36:16 point_skyscan result=0 11:36:16 Check angles 11:36:16 SkyScan query 11:36:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:36:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:36:17 Message to Master queued w/err=0: serial=104631 error=0 11:36:22 Received message from Master: op=Filter serial=104632 11:36:22 Color wheel filter change from 0 to 0 11:36:22 FLIGetFilterPos err=0 currentPosition=0 11:36:22 FLIGetStepsRemaining err=0 RemainingSteps=0 11:36:22 Filter is already there-color wheel unchanged 11:36:22 Received message from Master: op=Shutter serial=104633 11:36:22 Shutter LASER close 11:36:22 Received message from Camera: op=State serial=104635 11:36:22 GetSingleValue result=40 Value=cccccccc 11:36:22 SkyScan query 11:36:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:36:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:23 Parameters OK 11:36:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:23 Set A/D data flow result=40 11:36:23 Set A/D channel type result=40 11:36:23 Set A/D encoding result=40 11:36:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:23 Set channel filter=0.000000e+000 result=40 11:36:23 Config A/D Result=40 11:36:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:23 Get A/D filter: -9.255963e+061 result=40 11:36:23 Get A/D value=-858993460 result=40 11:36:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:23 Parameters OK 11:36:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:23 Set A/D data flow result=40 11:36:23 Set A/D channel type result=40 11:36:23 Set A/D encoding result=40 11:36:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:23 Set channel filter=0.000000e+000 result=40 11:36:23 Config A/D Result=40 11:36:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:23 Get A/D filter: -9.255963e+061 result=40 11:36:23 Get A/D value=-858993460 result=40 11:36:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:36:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:36:23 Aux= 11:36:23 Message to Camera, serial 104635 queued 11:37:00 Received message from Master: op=PointingHead serial=104648 11:37:00 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:37:00 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:37:00 Point started: ret=0 11:37:00 point_skyscan result=0 11:37:01 Check angles 11:37:01 SkyScan query 11:37:01 SkyScan query done: ret=0 az=135.735<-9049 ze=-6.51<-12434 Statuses=0009 0008 11:37:01 Msec=0 True Az=135.735 Ze=-6.51 Az status=0009 Ze status=0008 11:37:01 Check angles 11:37:01 SkyScan query 11:37:02 SkyScan query done: ret=0 az=153.54<-10236 ze=-6.495<-12433 Statuses=0009 0008 11:37:02 Msec=750 True Az=153.54 Ze=-6.495 Az status=0009 Ze status=0008 11:37:02 Check angles 11:37:02 SkyScan query 11:37:03 SkyScan query done: ret=0 az=170.985<-11399 ze=-6.495<-12433 Statuses=0009 0008 11:37:03 Msec=1500 True Az=170.985 Ze=-6.495 Az status=0009 Ze status=0008 11:37:03 Check angles 11:37:03 SkyScan query 11:37:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:37:04 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:37:04 Message to Master queued w/err=0: serial=104648 error=0 11:37:09 Received message from Master: op=Filter serial=104649 11:37:09 Color wheel filter change from 0 to 0 11:37:09 FLIGetFilterPos err=0 currentPosition=0 11:37:09 FLIGetStepsRemaining err=0 RemainingSteps=0 11:37:09 Filter is already there-color wheel unchanged 11:37:09 Received message from Master: op=Shutter serial=104650 11:37:09 Shutter LASER close 11:37:09 Received message from Camera: op=State serial=104652 11:37:09 GetSingleValue result=40 Value=cccccccc 11:37:09 SkyScan query 11:37:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:37:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:09 Parameters OK 11:37:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:09 Set A/D data flow result=40 11:37:09 Set A/D channel type result=40 11:37:09 Set A/D encoding result=40 11:37:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:09 Set channel filter=0.000000e+000 result=40 11:37:09 Config A/D Result=40 11:37:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:09 Get A/D filter: -9.255963e+061 result=40 11:37:09 Get A/D value=-858993460 result=40 11:37:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:09 Parameters OK 11:37:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:09 Set A/D data flow result=40 11:37:09 Set A/D channel type result=40 11:37:09 Set A/D encoding result=40 11:37:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:09 Set channel filter=0.000000e+000 result=40 11:37:09 Config A/D Result=40 11:37:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:09 Get A/D filter: -9.255963e+061 result=40 11:37:09 Get A/D value=-858993460 result=40 11:37:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:37:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:37:09 Aux= 11:37:09 Message to Camera, serial 104652 queued 11:37:46 Received message from Master: op=PointingHead serial=104665 11:37:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:37:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:37:46 Point started: ret=0 11:37:46 point_skyscan result=0 11:37:47 Check angles 11:37:47 SkyScan query 11:37:48 SkyScan query done: ret=0 az=152.925<-10195 ze=6.51<-11566 Statuses=0009 0008 11:37:48 Msec=0 True Az=152.925 Ze=6.51 Az status=0009 Ze status=0008 11:37:48 Check angles 11:37:48 SkyScan query 11:37:49 SkyScan query done: ret=0 az=135.42<-9028 ze=6.495<-11567 Statuses=0009 0008 11:37:49 Msec=750 True Az=135.42 Ze=6.495 Az status=0009 Ze status=0008 11:37:49 Check angles 11:37:49 SkyScan query 11:37:49 SkyScan query done: ret=0 az=117.96<-7864 ze=6.495<-11567 Statuses=0009 0008 11:37:49 Msec=1500 True Az=117.96 Ze=6.495 Az status=0009 Ze status=0008 11:37:49 Check angles 11:37:49 SkyScan query 11:37:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:37:50 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:37:50 Message to Master queued w/err=0: serial=104665 error=0 11:37:55 Received message from Master: op=Filter serial=104666 11:37:55 Color wheel filter change from 0 to 0 11:37:55 FLIGetFilterPos err=0 currentPosition=0 11:37:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:37:55 Filter is already there-color wheel unchanged 11:37:55 Received message from Master: op=Shutter serial=104667 11:37:55 Shutter LASER close 11:37:55 Received message from Camera: op=State serial=104669 11:37:55 GetSingleValue result=40 Value=cccccccc 11:37:55 SkyScan query 11:37:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:37:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:56 Parameters OK 11:37:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:56 Set A/D data flow result=40 11:37:56 Set A/D channel type result=40 11:37:56 Set A/D encoding result=40 11:37:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:56 Set channel filter=0.000000e+000 result=40 11:37:56 Config A/D Result=40 11:37:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:56 Get A/D filter: -9.255963e+061 result=40 11:37:56 Get A/D value=-858993460 result=40 11:37:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:56 Parameters OK 11:37:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:56 Set A/D data flow result=40 11:37:56 Set A/D channel type result=40 11:37:56 Set A/D encoding result=40 11:37:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:56 Set channel filter=0.000000e+000 result=40 11:37:56 Config A/D Result=40 11:37:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:56 Get A/D filter: -9.255963e+061 result=40 11:37:56 Get A/D value=-858993460 result=40 11:37:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:37:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:37:56 Aux= 11:37:56 Message to Camera, serial 104669 queued 11:38:33 Received message from Master: op=PointingHead serial=104682 11:38:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:38:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:38:33 Point started: ret=0 11:38:33 point_skyscan result=0 11:38:34 Check angles 11:38:34 SkyScan query 11:38:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.64<-13576 Statuses=0008 0009 11:38:34 Msec=0 True Az=112.995 Ze=-23.64 Az status=0008 Ze status=0009 11:38:35 Check angles 11:38:35 SkyScan query 11:38:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-45<-15000 Statuses=0008 0009 11:38:35 Msec=750 True Az=112.995 Ze=-45 Az status=0008 Ze status=0009 11:38:35 Check angles 11:38:35 SkyScan query 11:38:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.985<-16399 Statuses=0008 0009 11:38:36 Msec=1500 True Az=112.995 Ze=-65.985 Az status=0008 Ze status=0009 11:38:36 Check angles 11:38:36 SkyScan query 11:38:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.94<-17796 Statuses=0008 0009 11:38:37 Msec=2250 True Az=112.995 Ze=-86.94 Az status=0008 Ze status=0009 11:38:37 Check angles 11:38:37 SkyScan query 11:38:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.94<-19196 Statuses=0008 0009 11:38:37 Msec=3000 True Az=112.995 Ze=-107.94 Az status=0008 Ze status=0009 11:38:38 Check angles 11:38:38 SkyScan query 11:38:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.85<-20590 Statuses=0008 0009 11:38:38 Msec=3750 True Az=112.995 Ze=-128.85 Az status=0008 Ze status=0009 11:38:38 Check angles 11:38:38 SkyScan query 11:38:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 11:38:39 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 11:38:39 Check angles 11:38:39 SkyScan query 11:38:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.73<-23382 Statuses=0008 0009 11:38:40 Msec=5250 True Az=112.995 Ze=-170.73 Az status=0008 Ze status=0009 11:38:40 Check angles 11:38:40 SkyScan query 11:38:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:38:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:38:40 Message to Master queued w/err=0: serial=104682 error=0 11:38:45 Received message from Master: op=Filter serial=104683 11:38:45 Color wheel filter change from 0 to 0 11:38:45 FLIGetFilterPos err=0 currentPosition=0 11:38:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:38:45 Filter is already there-color wheel unchanged 11:38:46 Received message from Master: op=Shutter serial=104684 11:38:46 Shutter LASER open 11:38:46 Received message from Camera: op=State serial=104686 11:38:46 GetSingleValue result=40 Value=cccccccc 11:38:46 SkyScan query 11:38:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:38:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:46 Parameters OK 11:38:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:46 Set A/D data flow result=40 11:38:46 Set A/D channel type result=40 11:38:46 Set A/D encoding result=40 11:38:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:46 Set channel filter=0.000000e+000 result=40 11:38:46 Config A/D Result=40 11:38:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:46 Get A/D filter: -9.255963e+061 result=40 11:38:46 Get A/D value=-858993460 result=40 11:38:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:46 Parameters OK 11:38:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:46 Set A/D data flow result=40 11:38:46 Set A/D channel type result=40 11:38:46 Set A/D encoding result=40 11:38:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:46 Set channel filter=0.000000e+000 result=40 11:38:46 Config A/D Result=40 11:38:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:46 Get A/D filter: -9.255963e+061 result=40 11:38:46 Get A/D value=-858993460 result=40 11:38:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:38:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:38:46 Aux= 11:38:46 Message to Camera, serial 104686 queued 11:38:55 Received message from Master: op=Shutter serial=104696 11:38:55 Shutter LASER close 11:38:55 Received message from Master: op=PointingHead serial=104700 11:38:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:38:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:38:56 Point started: ret=0 11:38:56 point_skyscan result=0 11:38:56 Check angles 11:38:56 SkyScan query 11:38:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 11:38:57 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 11:38:57 Check angles 11:38:57 SkyScan query 11:38:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.65<-20110 Statuses=0008 0009 11:38:58 Msec=750 True Az=112.995 Ze=-121.65 Az status=0008 Ze status=0009 11:38:58 Check angles 11:38:58 SkyScan query 11:38:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.71<-18714 Statuses=0008 0009 11:38:58 Msec=1500 True Az=112.995 Ze=-100.71 Az status=0008 Ze status=0009 11:38:59 Check angles 11:38:59 SkyScan query 11:38:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.725<-17315 Statuses=0008 0009 11:38:59 Msec=2250 True Az=112.995 Ze=-79.725 Az status=0008 Ze status=0009 11:38:59 Check angles 11:38:59 SkyScan query 11:39:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 11:39:00 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 11:39:00 Check angles 11:39:00 SkyScan query 11:39:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.8<-14520 Statuses=0008 0009 11:39:01 Msec=3750 True Az=112.995 Ze=-37.8 Az status=0008 Ze status=0009 11:39:01 Check angles 11:39:01 SkyScan query 11:39:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.86<-13124 Statuses=0008 0009 11:39:01 Msec=4500 True Az=112.995 Ze=-16.86 Az status=0008 Ze status=0009 11:39:02 Check angles 11:39:02 SkyScan query 11:39:02 SkyScan query done: ret=0 az=112.995<-7533 ze=4.05<-11730 Statuses=0008 0009 11:39:02 Msec=5250 True Az=112.995 Ze=4.05 Az status=0008 Ze status=0009 11:39:02 Check angles 11:39:02 SkyScan query 11:39:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:39:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:39:03 Message to Master queued w/err=0: serial=104700 error=0 11:39:08 Received message from Master: op=Filter serial=104701 11:39:08 Color wheel filter change from 0 to 0 11:39:08 FLIGetFilterPos err=0 currentPosition=0 11:39:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:08 Filter is already there-color wheel unchanged 11:39:08 Received message from Master: op=Shutter serial=104702 11:39:08 Shutter LASER close 11:39:08 Received message from Camera: op=State serial=104704 11:39:08 GetSingleValue result=40 Value=cccccccc 11:39:08 SkyScan query 11:39:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:39:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:09 Parameters OK 11:39:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:09 Set A/D data flow result=40 11:39:09 Set A/D channel type result=40 11:39:09 Set A/D encoding result=40 11:39:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:09 Set channel filter=0.000000e+000 result=40 11:39:09 Config A/D Result=40 11:39:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:09 Get A/D filter: -9.255963e+061 result=40 11:39:09 Get A/D value=-858993460 result=40 11:39:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:09 Parameters OK 11:39:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:09 Set A/D data flow result=40 11:39:09 Set A/D channel type result=40 11:39:09 Set A/D encoding result=40 11:39:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:09 Set channel filter=0.000000e+000 result=40 11:39:09 Config A/D Result=40 11:39:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:09 Get A/D filter: -9.255963e+061 result=40 11:39:09 Get A/D value=-858993460 result=40 11:39:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:09 Aux= 11:39:09 Message to Camera, serial 104704 queued 11:39:46 Received message from Master: op=PointingHead serial=104717 11:39:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:39:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:39:46 Point started: ret=0 11:39:46 point_skyscan result=0 11:39:47 Check angles 11:39:47 SkyScan query 11:39:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:39:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:39:47 Message to Master queued w/err=0: serial=104717 error=0 11:39:52 Received message from Master: op=Filter serial=104718 11:39:52 Color wheel filter change from 0 to 0 11:39:52 FLIGetFilterPos err=0 currentPosition=0 11:39:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:52 Filter is already there-color wheel unchanged 11:39:53 Received message from Master: op=Shutter serial=104719 11:39:53 Shutter LASER close 11:39:53 Received message from Camera: op=State serial=104721 11:39:53 GetSingleValue result=40 Value=cccccccc 11:39:53 SkyScan query 11:39:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:39:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:53 Parameters OK 11:39:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:53 Set A/D data flow result=40 11:39:53 Set A/D channel type result=40 11:39:53 Set A/D encoding result=40 11:39:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:53 Set channel filter=0.000000e+000 result=40 11:39:53 Config A/D Result=40 11:39:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:53 Get A/D filter: -9.255963e+061 result=40 11:39:53 Get A/D value=-858993460 result=40 11:39:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:53 Parameters OK 11:39:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:53 Set A/D data flow result=40 11:39:53 Set A/D channel type result=40 11:39:53 Set A/D encoding result=40 11:39:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:53 Set channel filter=0.000000e+000 result=40 11:39:53 Config A/D Result=40 11:39:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:53 Get A/D filter: -9.255963e+061 result=40 11:39:53 Get A/D value=-858993460 result=40 11:39:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:53 Aux= 11:39:53 Message to Camera, serial 104721 queued 11:40:30 Received message from Master: op=PointingHead serial=104734 11:40:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:40:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:40:30 Point started: ret=0 11:40:30 point_skyscan result=0 11:40:31 Check angles 11:40:31 SkyScan query 11:40:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:40:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:40:32 Message to Master queued w/err=0: serial=104734 error=0 11:40:37 Received message from Master: op=Filter serial=104735 11:40:37 Color wheel filter change from 0 to 0 11:40:37 FLIGetFilterPos err=0 currentPosition=0 11:40:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:40:37 Filter is already there-color wheel unchanged 11:40:37 Received message from Master: op=Shutter serial=104736 11:40:37 Shutter LASER close 11:40:37 Received message from Camera: op=State serial=104738 11:40:37 GetSingleValue result=40 Value=cccccccc 11:40:37 SkyScan query 11:40:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:40:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:37 Parameters OK 11:40:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:37 Set A/D data flow result=40 11:40:37 Set A/D channel type result=40 11:40:37 Set A/D encoding result=40 11:40:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:37 Set channel filter=0.000000e+000 result=40 11:40:37 Config A/D Result=40 11:40:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:37 Get A/D filter: -9.255963e+061 result=40 11:40:37 Get A/D value=-858993460 result=40 11:40:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:37 Parameters OK 11:40:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:37 Set A/D data flow result=40 11:40:37 Set A/D channel type result=40 11:40:37 Set A/D encoding result=40 11:40:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:37 Set channel filter=0.000000e+000 result=40 11:40:37 Config A/D Result=40 11:40:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:37 Get A/D filter: -9.255963e+061 result=40 11:40:37 Get A/D value=-858993460 result=40 11:40:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:40:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:40:37 Aux= 11:40:37 Message to Camera, serial 104738 queued 11:41:13 Received message from Master: op=PointingHead serial=104750 11:41:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:41:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:41:14 Point started: ret=0 11:41:14 point_skyscan result=0 11:41:14 Check angles 11:41:14 SkyScan query 11:41:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:41:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:41:15 Message to Master queued w/err=0: serial=104750 error=0 11:41:20 Received message from Master: op=Filter serial=104751 11:41:20 Color wheel filter change from 0 to 0 11:41:20 FLIGetFilterPos err=0 currentPosition=0 11:41:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:41:20 Filter is already there-color wheel unchanged 11:41:20 Received message from Master: op=Shutter serial=104752 11:41:20 Shutter LASER close 11:41:20 Received message from Camera: op=State serial=104754 11:41:20 GetSingleValue result=40 Value=cccccccc 11:41:20 SkyScan query 11:41:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:41:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:21 Parameters OK 11:41:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:21 Set A/D data flow result=40 11:41:21 Set A/D channel type result=40 11:41:21 Set A/D encoding result=40 11:41:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:21 Set channel filter=0.000000e+000 result=40 11:41:21 Config A/D Result=40 11:41:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:21 Get A/D filter: -9.255963e+061 result=40 11:41:21 Get A/D value=-858993460 result=40 11:41:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:21 Parameters OK 11:41:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:21 Set A/D data flow result=40 11:41:21 Set A/D channel type result=40 11:41:21 Set A/D encoding result=40 11:41:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:21 Set channel filter=0.000000e+000 result=40 11:41:21 Config A/D Result=40 11:41:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:21 Get A/D filter: -9.255963e+061 result=40 11:41:21 Get A/D value=-858993460 result=40 11:41:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:41:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:41:21 Aux= 11:41:21 Message to Camera, serial 104754 queued 11:41:58 Received message from Master: op=PointingHead serial=104767 11:41:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:41:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:41:58 Point started: ret=0 11:41:58 point_skyscan result=0 11:41:59 Check angles 11:41:59 SkyScan query 11:41:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 11:41:59 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 11:41:59 Check angles 11:41:59 SkyScan query 11:42:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.175<-14945 Statuses=0008 0009 11:42:00 Msec=750 True Az=112.995 Ze=-44.175 Az status=0008 Ze status=0009 11:42:00 Check angles 11:42:00 SkyScan query 11:42:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.1<-16340 Statuses=0008 0009 11:42:01 Msec=1500 True Az=112.995 Ze=-65.1 Az status=0008 Ze status=0009 11:42:01 Check angles 11:42:01 SkyScan query 11:42:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.055<-17737 Statuses=0008 0009 11:42:02 Msec=2250 True Az=112.995 Ze=-86.055 Az status=0008 Ze status=0009 11:42:02 Check angles 11:42:02 SkyScan query 11:42:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.98<-19132 Statuses=0008 0009 11:42:02 Msec=3000 True Az=112.995 Ze=-106.98 Az status=0008 Ze status=0009 11:42:02 Check angles 11:42:02 SkyScan query 11:42:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.92<-20528 Statuses=0008 0009 11:42:03 Msec=3750 True Az=112.995 Ze=-127.92 Az status=0008 Ze status=0009 11:42:03 Check angles 11:42:03 SkyScan query 11:42:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.86<-21924 Statuses=0008 0009 11:42:04 Msec=4500 True Az=112.995 Ze=-148.86 Az status=0008 Ze status=0009 11:42:04 Check angles 11:42:04 SkyScan query 11:42:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.8<-23320 Statuses=0008 0009 11:42:05 Msec=5250 True Az=112.995 Ze=-169.8 Az status=0008 Ze status=0009 11:42:05 Check angles 11:42:05 SkyScan query 11:42:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:42:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:42:05 Message to Master queued w/err=0: serial=104767 error=0 11:42:10 Received message from Master: op=Filter serial=104768 11:42:10 Color wheel filter change from 0 to 0 11:42:10 FLIGetFilterPos err=0 currentPosition=0 11:42:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:42:10 Filter is already there-color wheel unchanged 11:42:10 Received message from Master: op=Shutter serial=104769 11:42:10 Shutter LASER open 11:42:11 Received message from Camera: op=State serial=104771 11:42:11 GetSingleValue result=40 Value=cccccccc 11:42:11 SkyScan query 11:42:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:42:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:11 Parameters OK 11:42:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:11 Set A/D data flow result=40 11:42:11 Set A/D channel type result=40 11:42:11 Set A/D encoding result=40 11:42:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:11 Set channel filter=0.000000e+000 result=40 11:42:11 Config A/D Result=40 11:42:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:11 Get A/D filter: -9.255963e+061 result=40 11:42:11 Get A/D value=-858993460 result=40 11:42:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:11 Parameters OK 11:42:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:11 Set A/D data flow result=40 11:42:11 Set A/D channel type result=40 11:42:11 Set A/D encoding result=40 11:42:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:11 Set channel filter=0.000000e+000 result=40 11:42:11 Config A/D Result=40 11:42:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:11 Get A/D filter: -9.255963e+061 result=40 11:42:11 Get A/D value=-858993460 result=40 11:42:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:42:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:42:11 Aux= 11:42:11 Message to Camera, serial 104771 queued 11:42:20 Received message from Master: op=Shutter serial=104781 11:42:20 Shutter LASER close 11:42:20 Received message from Master: op=PointingHead serial=104785 11:42:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:42:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:42:21 Point started: ret=0 11:42:21 point_skyscan result=0 11:42:21 Check angles 11:42:21 SkyScan query 11:42:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.355<-21557 Statuses=0008 0009 11:42:22 Msec=0 True Az=112.995 Ze=-143.355 Az status=0008 Ze status=0009 11:42:22 Check angles 11:42:22 SkyScan query 11:42:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.92<-20128 Statuses=0008 0009 11:42:23 Msec=750 True Az=112.995 Ze=-121.92 Az status=0008 Ze status=0009 11:42:23 Check angles 11:42:23 SkyScan query 11:42:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.025<-18735 Statuses=0008 0009 11:42:23 Msec=1500 True Az=112.995 Ze=-101.025 Az status=0008 Ze status=0009 11:42:24 Check angles 11:42:24 SkyScan query 11:42:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.055<-17337 Statuses=0008 0009 11:42:24 Msec=2250 True Az=112.995 Ze=-80.055 Az status=0008 Ze status=0009 11:42:24 Check angles 11:42:24 SkyScan query 11:42:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.1<-15940 Statuses=0008 0009 11:42:25 Msec=3000 True Az=112.995 Ze=-59.1 Az status=0008 Ze status=0009 11:42:25 Check angles 11:42:25 SkyScan query 11:42:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.07<-14538 Statuses=0008 0009 11:42:26 Msec=3750 True Az=112.995 Ze=-38.07 Az status=0008 Ze status=0009 11:42:26 Check angles 11:42:26 SkyScan query 11:42:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.145<-13143 Statuses=0008 0009 11:42:26 Msec=4500 True Az=112.995 Ze=-17.145 Az status=0008 Ze status=0009 11:42:27 Check angles 11:42:27 SkyScan query 11:42:27 SkyScan query done: ret=0 az=112.995<-7533 ze=3.825<-11745 Statuses=0008 0009 11:42:27 Msec=5250 True Az=112.995 Ze=3.825 Az status=0008 Ze status=0009 11:42:27 Check angles 11:42:27 SkyScan query 11:42:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:42:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:42:28 Message to Master queued w/err=0: serial=104785 error=0 11:42:33 Received message from Master: op=Filter serial=104786 11:42:33 Color wheel filter change from 0 to 0 11:42:33 FLIGetFilterPos err=0 currentPosition=0 11:42:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:42:33 Filter is already there-color wheel unchanged 11:42:33 Received message from Master: op=Shutter serial=104787 11:42:33 Shutter LASER close 11:42:33 Received message from Camera: op=State serial=104789 11:42:33 GetSingleValue result=40 Value=cccccccc 11:42:33 SkyScan query 11:42:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:42:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:34 Parameters OK 11:42:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:34 Set A/D data flow result=40 11:42:34 Set A/D channel type result=40 11:42:34 Set A/D encoding result=40 11:42:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:34 Set channel filter=0.000000e+000 result=40 11:42:34 Config A/D Result=40 11:42:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:34 Get A/D filter: -9.255963e+061 result=40 11:42:34 Get A/D value=-858993460 result=40 11:42:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:34 Parameters OK 11:42:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:34 Set A/D data flow result=40 11:42:34 Set A/D channel type result=40 11:42:34 Set A/D encoding result=40 11:42:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:34 Set channel filter=0.000000e+000 result=40 11:42:34 Config A/D Result=40 11:42:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:34 Get A/D filter: -9.255963e+061 result=40 11:42:34 Get A/D value=-858993460 result=40 11:42:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:42:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:42:34 Aux= 11:42:34 Message to Camera, serial 104789 queued 11:43:11 Received message from Master: op=PointingHead serial=104802 11:43:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:43:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:43:11 Point started: ret=0 11:43:11 point_skyscan result=0 11:43:12 Check angles 11:43:12 SkyScan query 11:43:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:43:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:43:12 Message to Master queued w/err=0: serial=104802 error=0 11:43:17 Received message from Master: op=Filter serial=104803 11:43:17 Color wheel filter change from 0 to 0 11:43:17 FLIGetFilterPos err=0 currentPosition=0 11:43:17 FLIGetStepsRemaining err=0 RemainingSteps=0 11:43:17 Filter is already there-color wheel unchanged 11:43:18 Received message from Master: op=Shutter serial=104804 11:43:18 Shutter LASER close 11:43:18 Received message from Camera: op=State serial=104806 11:43:18 GetSingleValue result=40 Value=cccccccc 11:43:18 SkyScan query 11:43:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:43:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:18 Parameters OK 11:43:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:18 Set A/D data flow result=40 11:43:18 Set A/D channel type result=40 11:43:18 Set A/D encoding result=40 11:43:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:18 Set channel filter=0.000000e+000 result=40 11:43:18 Config A/D Result=40 11:43:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:18 Get A/D filter: -9.255963e+061 result=40 11:43:18 Get A/D value=-858993460 result=40 11:43:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:18 Parameters OK 11:43:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:18 Set A/D data flow result=40 11:43:18 Set A/D channel type result=40 11:43:18 Set A/D encoding result=40 11:43:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:18 Set channel filter=0.000000e+000 result=40 11:43:18 Config A/D Result=40 11:43:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:18 Get A/D filter: -9.255963e+061 result=40 11:43:18 Get A/D value=-858993460 result=40 11:43:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:43:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:43:18 Aux= 11:43:18 Message to Camera, serial 104806 queued [UTC 2019-3-4 11:43:50] 11:43:54 Received message from Master: op=PointingHead serial=104818 11:43:54 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:43:54 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:43:54 Point started: ret=0 11:43:54 point_skyscan result=0 11:43:55 Check angles 11:43:55 SkyScan query 11:43:56 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 11:43:56 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 11:43:56 Check angles 11:43:56 SkyScan query 11:43:56 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.51<-12434 Statuses=0009 0008 11:43:56 Msec=750 True Az=153.93 Ze=-6.51 Az status=0009 Ze status=0008 11:43:57 Check angles 11:43:57 SkyScan query 11:43:57 SkyScan query done: ret=0 az=171.39<-11426 ze=-6.495<-12433 Statuses=0009 0008 11:43:57 Msec=1500 True Az=171.39 Ze=-6.495 Az status=0009 Ze status=0008 11:43:57 Check angles 11:43:57 SkyScan query 11:43:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:43:58 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:43:58 Message to Master queued w/err=0: serial=104818 error=0 11:44:03 Received message from Master: op=Filter serial=104819 11:44:03 Color wheel filter change from 0 to 0 11:44:03 FLIGetFilterPos err=0 currentPosition=0 11:44:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:03 Filter is already there-color wheel unchanged 11:44:03 Received message from Master: op=Shutter serial=104820 11:44:03 Shutter LASER close 11:44:03 Received message from Camera: op=State serial=104822 11:44:03 GetSingleValue result=40 Value=cccccccc 11:44:03 SkyScan query 11:44:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:44:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:04 Parameters OK 11:44:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:04 Set A/D data flow result=40 11:44:04 Set A/D channel type result=40 11:44:04 Set A/D encoding result=40 11:44:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:04 Set channel filter=0.000000e+000 result=40 11:44:04 Config A/D Result=40 11:44:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:04 Get A/D filter: -9.255963e+061 result=40 11:44:04 Get A/D value=-858993460 result=40 11:44:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:04 Parameters OK 11:44:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:04 Set A/D data flow result=40 11:44:04 Set A/D channel type result=40 11:44:04 Set A/D encoding result=40 11:44:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:04 Set channel filter=0.000000e+000 result=40 11:44:04 Config A/D Result=40 11:44:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:04 Get A/D filter: -9.255963e+061 result=40 11:44:04 Get A/D value=-858993460 result=40 11:44:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:04 Aux= 11:44:04 Message to Camera, serial 104822 queued 11:44:41 Received message from Master: op=PointingHead serial=104835 11:44:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:44:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:44:41 Point started: ret=0 11:44:41 point_skyscan result=0 11:44:42 Check angles 11:44:42 SkyScan query 11:44:42 SkyScan query done: ret=0 az=152.64<-10176 ze=6.51<-11566 Statuses=0009 0008 11:44:42 Msec=0 True Az=152.64 Ze=6.51 Az status=0009 Ze status=0008 11:44:42 Check angles 11:44:42 SkyScan query 11:44:43 SkyScan query done: ret=0 az=135.06<-9004 ze=6.495<-11567 Statuses=0009 0008 11:44:43 Msec=750 True Az=135.06 Ze=6.495 Az status=0009 Ze status=0008 11:44:43 Check angles 11:44:43 SkyScan query 11:44:44 SkyScan query done: ret=0 az=117.285<-7819 ze=6.495<-11567 Statuses=0009 0008 11:44:44 Msec=1500 True Az=117.285 Ze=6.495 Az status=0009 Ze status=0008 11:44:44 Check angles 11:44:44 SkyScan query 11:44:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:44:44 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:44:44 Message to Master queued w/err=0: serial=104835 error=0 11:44:49 Received message from Master: op=Filter serial=104836 11:44:49 Color wheel filter change from 0 to 0 11:44:49 FLIGetFilterPos err=0 currentPosition=0 11:44:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:49 Filter is already there-color wheel unchanged 11:44:50 Received message from Master: op=Shutter serial=104837 11:44:50 Shutter LASER close 11:44:50 Received message from Camera: op=State serial=104839 11:44:50 GetSingleValue result=40 Value=cccccccc 11:44:50 SkyScan query 11:44:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:44:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:50 Parameters OK 11:44:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:50 Set A/D data flow result=40 11:44:50 Set A/D channel type result=40 11:44:50 Set A/D encoding result=40 11:44:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:50 Set channel filter=0.000000e+000 result=40 11:44:50 Config A/D Result=40 11:44:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:50 Get A/D filter: -9.255963e+061 result=40 11:44:50 Get A/D value=-858993460 result=40 11:44:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:50 Parameters OK 11:44:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:50 Set A/D data flow result=40 11:44:50 Set A/D channel type result=40 11:44:50 Set A/D encoding result=40 11:44:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:50 Set channel filter=0.000000e+000 result=40 11:44:50 Config A/D Result=40 11:44:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:50 Get A/D filter: -9.255963e+061 result=40 11:44:50 Get A/D value=-858993460 result=40 11:44:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:50 Aux= 11:44:50 Message to Camera, serial 104839 queued 11:45:27 Received message from Master: op=PointingHead serial=104852 11:45:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:45:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:45:28 Point started: ret=0 11:45:28 point_skyscan result=0 11:45:28 Check angles 11:45:28 SkyScan query 11:45:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 11:45:29 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 11:45:29 Check angles 11:45:29 SkyScan query 11:45:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.46<-14964 Statuses=0008 0009 11:45:30 Msec=750 True Az=112.995 Ze=-44.46 Az status=0008 Ze status=0009 11:45:30 Check angles 11:45:30 SkyScan query 11:45:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.415<-16361 Statuses=0008 0009 11:45:30 Msec=1500 True Az=112.995 Ze=-65.415 Az status=0008 Ze status=0009 11:45:31 Check angles 11:45:31 SkyScan query 11:45:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 11:45:31 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 11:45:31 Check angles 11:45:31 SkyScan query 11:45:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.805<-19187 Statuses=0008 0009 11:45:32 Msec=3000 True Az=112.995 Ze=-107.805 Az status=0008 Ze status=0009 11:45:32 Check angles 11:45:32 SkyScan query 11:45:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.73<-20582 Statuses=0008 0009 11:45:33 Msec=3750 True Az=112.995 Ze=-128.73 Az status=0008 Ze status=0009 11:45:33 Check angles 11:45:33 SkyScan query 11:45:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 11:45:33 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 11:45:34 Check angles 11:45:34 SkyScan query 11:45:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.625<-23375 Statuses=0008 0009 11:45:34 Msec=5250 True Az=112.995 Ze=-170.625 Az status=0008 Ze status=0009 11:45:34 Check angles 11:45:34 SkyScan query 11:45:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:45:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:45:35 Message to Master queued w/err=0: serial=104852 error=0 11:45:40 Received message from Master: op=Filter serial=104853 11:45:40 Color wheel filter change from 0 to 0 11:45:40 FLIGetFilterPos err=0 currentPosition=0 11:45:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:45:40 Filter is already there-color wheel unchanged 11:45:40 Received message from Master: op=Shutter serial=104854 11:45:40 Shutter LASER open 11:45:40 Received message from Camera: op=State serial=104856 11:45:40 GetSingleValue result=40 Value=cccccccc 11:45:40 SkyScan query 11:45:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:45:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:41 Parameters OK 11:45:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:41 Set A/D data flow result=40 11:45:41 Set A/D channel type result=40 11:45:41 Set A/D encoding result=40 11:45:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:41 Set channel filter=0.000000e+000 result=40 11:45:41 Config A/D Result=40 11:45:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:41 Get A/D filter: -9.255963e+061 result=40 11:45:41 Get A/D value=-858993460 result=40 11:45:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:41 Parameters OK 11:45:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:41 Set A/D data flow result=40 11:45:41 Set A/D channel type result=40 11:45:41 Set A/D encoding result=40 11:45:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:41 Set channel filter=0.000000e+000 result=40 11:45:41 Config A/D Result=40 11:45:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:41 Get A/D filter: -9.255963e+061 result=40 11:45:41 Get A/D value=-858993460 result=40 11:45:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:45:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:45:41 Aux= 11:45:41 Message to Camera, serial 104856 queued 11:45:48 Received message from Master: op=Shutter serial=104865 11:45:48 Shutter LASER close 11:45:49 Received message from Master: op=PointingHead serial=104869 11:45:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:45:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:45:49 Point started: ret=0 11:45:49 point_skyscan result=0 11:45:50 Check angles 11:45:50 SkyScan query 11:45:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 11:45:50 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 11:45:51 Check angles 11:45:51 SkyScan query 11:45:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 11:45:51 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 11:45:51 Check angles 11:45:51 SkyScan query 11:45:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.68<-18712 Statuses=0008 0009 11:45:52 Msec=1500 True Az=112.995 Ze=-100.68 Az status=0008 Ze status=0009 11:45:52 Check angles 11:45:52 SkyScan query 11:45:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.695<-17313 Statuses=0008 0009 11:45:53 Msec=2250 True Az=112.995 Ze=-79.695 Az status=0008 Ze status=0009 11:45:53 Check angles 11:45:53 SkyScan query 11:45:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.77<-15918 Statuses=0008 0009 11:45:54 Msec=3000 True Az=112.995 Ze=-58.77 Az status=0008 Ze status=0009 11:45:54 Check angles 11:45:54 SkyScan query 11:45:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.38<-14492 Statuses=0008 0009 11:45:54 Msec=3750 True Az=112.995 Ze=-37.38 Az status=0008 Ze status=0009 11:45:54 Check angles 11:45:54 SkyScan query 11:45:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.41<-13094 Statuses=0008 0009 11:45:55 Msec=4500 True Az=112.995 Ze=-16.41 Az status=0008 Ze status=0009 11:45:55 Check angles 11:45:55 SkyScan query 11:45:56 SkyScan query done: ret=0 az=112.995<-7533 ze=4.425<-11705 Statuses=0008 0009 11:45:56 Msec=5250 True Az=112.995 Ze=4.425 Az status=0008 Ze status=0009 11:45:56 Check angles 11:45:56 SkyScan query 11:45:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:45:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:45:57 Message to Master queued w/err=0: serial=104869 error=0 11:46:02 Received message from Master: op=Filter serial=104870 11:46:02 Color wheel filter change from 0 to 0 11:46:02 FLIGetFilterPos err=0 currentPosition=0 11:46:02 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:02 Filter is already there-color wheel unchanged 11:46:02 Received message from Master: op=Shutter serial=104871 11:46:02 Shutter LASER close 11:46:02 Received message from Camera: op=State serial=104873 11:46:02 GetSingleValue result=40 Value=cccccccc 11:46:02 SkyScan query 11:46:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:46:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:02 Parameters OK 11:46:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:02 Set A/D data flow result=40 11:46:02 Set A/D channel type result=40 11:46:02 Set A/D encoding result=40 11:46:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:02 Set channel filter=0.000000e+000 result=40 11:46:02 Config A/D Result=40 11:46:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:02 Get A/D filter: -9.255963e+061 result=40 11:46:02 Get A/D value=-858993460 result=40 11:46:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:02 Parameters OK 11:46:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:02 Set A/D data flow result=40 11:46:02 Set A/D channel type result=40 11:46:02 Set A/D encoding result=40 11:46:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:02 Set channel filter=0.000000e+000 result=40 11:46:02 Config A/D Result=40 11:46:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:02 Get A/D filter: -9.255963e+061 result=40 11:46:02 Get A/D value=-858993460 result=40 11:46:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:02 Aux= 11:46:02 Message to Camera, serial 104873 queued 11:46:39 Received message from Master: op=PointingHead serial=104886 11:46:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:46:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:46:40 Point started: ret=0 11:46:40 point_skyscan result=0 11:46:40 Check angles 11:46:40 SkyScan query 11:46:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:46:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:46:41 Message to Master queued w/err=0: serial=104886 error=0 11:46:46 Received message from Master: op=Filter serial=104887 11:46:46 Color wheel filter change from 0 to 0 11:46:46 FLIGetFilterPos err=0 currentPosition=0 11:46:46 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:46 Filter is already there-color wheel unchanged 11:46:46 Received message from Master: op=Shutter serial=104888 11:46:46 Shutter LASER close 11:46:46 Received message from Camera: op=State serial=104890 11:46:46 GetSingleValue result=40 Value=cccccccc 11:46:46 SkyScan query 11:46:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:46:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:47 Parameters OK 11:46:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:47 Set A/D data flow result=40 11:46:47 Set A/D channel type result=40 11:46:47 Set A/D encoding result=40 11:46:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:47 Set channel filter=0.000000e+000 result=40 11:46:47 Config A/D Result=40 11:46:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:47 Get A/D filter: -9.255963e+061 result=40 11:46:47 Get A/D value=-858993460 result=40 11:46:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:47 Parameters OK 11:46:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:47 Set A/D data flow result=40 11:46:47 Set A/D channel type result=40 11:46:47 Set A/D encoding result=40 11:46:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:47 Set channel filter=0.000000e+000 result=40 11:46:47 Config A/D Result=40 11:46:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:47 Get A/D filter: -9.255963e+061 result=40 11:46:47 Get A/D value=-858993460 result=40 11:46:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:47 Aux= 11:46:47 Message to Camera, serial 104890 queued 11:47:24 Received message from Master: op=PointingHead serial=104903 11:47:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:47:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:47:24 Point started: ret=0 11:47:24 point_skyscan result=0 11:47:25 Check angles 11:47:25 SkyScan query 11:47:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:47:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:47:25 Message to Master queued w/err=0: serial=104903 error=0 11:47:30 Received message from Master: op=Filter serial=104904 11:47:30 Color wheel filter change from 0 to 0 11:47:30 FLIGetFilterPos err=0 currentPosition=0 11:47:30 FLIGetStepsRemaining err=0 RemainingSteps=0 11:47:30 Filter is already there-color wheel unchanged 11:47:30 Received message from Master: op=Shutter serial=104905 11:47:30 Shutter LASER close 11:47:31 Received message from Camera: op=State serial=104907 11:47:31 GetSingleValue result=40 Value=cccccccc 11:47:31 SkyScan query 11:47:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:47:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:31 Parameters OK 11:47:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:31 Set A/D data flow result=40 11:47:31 Set A/D channel type result=40 11:47:31 Set A/D encoding result=40 11:47:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:31 Set channel filter=0.000000e+000 result=40 11:47:31 Config A/D Result=40 11:47:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:31 Get A/D filter: -9.255963e+061 result=40 11:47:31 Get A/D value=-858993460 result=40 11:47:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:31 Parameters OK 11:47:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:31 Set A/D data flow result=40 11:47:31 Set A/D channel type result=40 11:47:31 Set A/D encoding result=40 11:47:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:31 Set channel filter=0.000000e+000 result=40 11:47:31 Config A/D Result=40 11:47:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:31 Get A/D filter: -9.255963e+061 result=40 11:47:31 Get A/D value=-858993460 result=40 11:47:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:47:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:47:31 Aux= 11:47:31 Message to Camera, serial 104907 queued 11:48:08 Received message from Master: op=PointingHead serial=104920 11:48:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:48:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:48:08 Point started: ret=0 11:48:08 point_skyscan result=0 11:48:09 Check angles 11:48:09 SkyScan query 11:48:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:48:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:48:10 Message to Master queued w/err=0: serial=104920 error=0 11:48:15 Received message from Master: op=Filter serial=104921 11:48:15 Color wheel filter change from 0 to 0 11:48:15 FLIGetFilterPos err=0 currentPosition=0 11:48:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:48:15 Filter is already there-color wheel unchanged 11:48:15 Received message from Master: op=Shutter serial=104922 11:48:15 Shutter LASER close 11:48:15 Received message from Camera: op=State serial=104924 11:48:15 GetSingleValue result=40 Value=cccccccc 11:48:15 SkyScan query 11:48:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:48:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:15 Parameters OK 11:48:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:15 Set A/D data flow result=40 11:48:15 Set A/D channel type result=40 11:48:15 Set A/D encoding result=40 11:48:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:15 Set channel filter=0.000000e+000 result=40 11:48:15 Config A/D Result=40 11:48:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:15 Get A/D filter: -9.255963e+061 result=40 11:48:15 Get A/D value=-858993460 result=40 11:48:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:15 Parameters OK 11:48:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:15 Set A/D data flow result=40 11:48:15 Set A/D channel type result=40 11:48:15 Set A/D encoding result=40 11:48:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:15 Set channel filter=0.000000e+000 result=40 11:48:15 Config A/D Result=40 11:48:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:15 Get A/D filter: -9.255963e+061 result=40 11:48:15 Get A/D value=-858993460 result=40 11:48:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:48:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:48:15 Aux= 11:48:15 Message to Camera, serial 104924 queued 11:48:52 Received message from Master: op=PointingHead serial=104937 11:48:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:48:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:48:53 Point started: ret=0 11:48:53 point_skyscan result=0 11:48:53 Check angles 11:48:53 SkyScan query 11:48:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 11:48:54 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 11:48:54 Check angles 11:48:54 SkyScan query 11:48:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.19<-14946 Statuses=0008 0009 11:48:55 Msec=750 True Az=112.995 Ze=-44.19 Az status=0008 Ze status=0009 11:48:55 Check angles 11:48:55 SkyScan query 11:48:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.115<-16341 Statuses=0008 0009 11:48:55 Msec=1500 True Az=112.995 Ze=-65.115 Az status=0008 Ze status=0009 11:48:56 Check angles 11:48:56 SkyScan query 11:48:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 11:48:56 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 11:48:56 Check angles 11:48:56 SkyScan query 11:48:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.43<-19162 Statuses=0008 0009 11:48:57 Msec=3000 True Az=112.995 Ze=-107.43 Az status=0008 Ze status=0009 11:48:57 Check angles 11:48:57 SkyScan query 11:48:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.385<-20559 Statuses=0008 0009 11:48:58 Msec=3750 True Az=112.995 Ze=-128.385 Az status=0008 Ze status=0009 11:48:58 Check angles 11:48:58 SkyScan query 11:48:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 11:48:58 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 11:48:59 Check angles 11:48:59 SkyScan query 11:48:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.73<-23382 Statuses=0008 0009 11:48:59 Msec=5250 True Az=112.995 Ze=-170.73 Az status=0008 Ze status=0009 11:48:59 Check angles 11:48:59 SkyScan query 11:49:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:49:00 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:49:00 Message to Master queued w/err=0: serial=104937 error=0 11:49:05 Received message from Master: op=Filter serial=104938 11:49:05 Color wheel filter change from 0 to 0 11:49:05 FLIGetFilterPos err=0 currentPosition=0 11:49:05 FLIGetStepsRemaining err=0 RemainingSteps=0 11:49:05 Filter is already there-color wheel unchanged 11:49:05 Received message from Master: op=Shutter serial=104939 11:49:05 Shutter LASER open 11:49:05 Received message from Camera: op=State serial=104941 11:49:05 GetSingleValue result=40 Value=cccccccc 11:49:05 SkyScan query 11:49:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:49:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:06 Parameters OK 11:49:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:06 Set A/D data flow result=40 11:49:06 Set A/D channel type result=40 11:49:06 Set A/D encoding result=40 11:49:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:06 Set channel filter=0.000000e+000 result=40 11:49:06 Config A/D Result=40 11:49:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:06 Get A/D filter: -9.255963e+061 result=40 11:49:06 Get A/D value=-858993460 result=40 11:49:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:06 Parameters OK 11:49:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:06 Set A/D data flow result=40 11:49:06 Set A/D channel type result=40 11:49:06 Set A/D encoding result=40 11:49:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:06 Set channel filter=0.000000e+000 result=40 11:49:06 Config A/D Result=40 11:49:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:06 Get A/D filter: -9.255963e+061 result=40 11:49:06 Get A/D value=-858993460 result=40 11:49:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:49:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:49:06 Aux= 11:49:06 Message to Camera, serial 104941 queued 11:49:14 Received message from Master: op=Shutter serial=104951 11:49:14 Shutter LASER close 11:49:15 Received message from Master: op=PointingHead serial=104955 11:49:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:49:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:49:15 Point started: ret=0 11:49:15 point_skyscan result=0 11:49:16 Check angles 11:49:16 SkyScan query 11:49:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 11:49:17 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 11:49:17 Check angles 11:49:17 SkyScan query 11:49:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.505<-20167 Statuses=0008 0009 11:49:17 Msec=750 True Az=112.995 Ze=-122.505 Az status=0008 Ze status=0009 11:49:17 Check angles 11:49:17 SkyScan query 11:49:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 11:49:18 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 11:49:18 Check angles 11:49:18 SkyScan query 11:49:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 11:49:19 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 11:49:19 Check angles 11:49:19 SkyScan query 11:49:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 11:49:20 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 11:49:20 Check angles 11:49:20 SkyScan query 11:49:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.725<-14515 Statuses=0008 0009 11:49:20 Msec=3750 True Az=112.995 Ze=-37.725 Az status=0008 Ze status=0009 11:49:20 Check angles 11:49:20 SkyScan query 11:49:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.785<-13119 Statuses=0008 0009 11:49:21 Msec=4500 True Az=112.995 Ze=-16.785 Az status=0008 Ze status=0009 11:49:21 Check angles 11:49:21 SkyScan query 11:49:22 SkyScan query done: ret=0 az=112.995<-7533 ze=4.125<-11725 Statuses=0008 0009 11:49:22 Msec=5250 True Az=112.995 Ze=4.125 Az status=0008 Ze status=0009 11:49:22 Check angles 11:49:22 SkyScan query 11:49:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:49:23 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:49:23 Message to Master queued w/err=0: serial=104955 error=0 11:49:28 Received message from Master: op=Filter serial=104956 11:49:28 Color wheel filter change from 0 to 0 11:49:28 FLIGetFilterPos err=0 currentPosition=0 11:49:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:49:28 Filter is already there-color wheel unchanged 11:49:28 Received message from Master: op=Shutter serial=104957 11:49:28 Shutter LASER close 11:49:28 Received message from Camera: op=State serial=104959 11:49:28 GetSingleValue result=40 Value=cccccccc 11:49:28 SkyScan query 11:49:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:49:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:28 Parameters OK 11:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:28 Set A/D data flow result=40 11:49:28 Set A/D channel type result=40 11:49:28 Set A/D encoding result=40 11:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:28 Set channel filter=0.000000e+000 result=40 11:49:28 Config A/D Result=40 11:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:28 Get A/D filter: -9.255963e+061 result=40 11:49:28 Get A/D value=-858993460 result=40 11:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:28 Parameters OK 11:49:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:28 Set A/D data flow result=40 11:49:28 Set A/D channel type result=40 11:49:28 Set A/D encoding result=40 11:49:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:28 Set channel filter=0.000000e+000 result=40 11:49:28 Config A/D Result=40 11:49:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:28 Get A/D filter: -9.255963e+061 result=40 11:49:28 Get A/D value=-858993460 result=40 11:49:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:49:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:49:28 Aux= 11:49:28 Message to Camera, serial 104959 queued 11:50:05 Received message from Master: op=PointingHead serial=104972 11:50:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:50:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:50:06 Point started: ret=0 11:50:06 point_skyscan result=0 11:50:06 Check angles 11:50:06 SkyScan query 11:50:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:50:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:50:07 Message to Master queued w/err=0: serial=104972 error=0 11:50:12 Received message from Master: op=Filter serial=104973 11:50:12 Color wheel filter change from 0 to 0 11:50:12 FLIGetFilterPos err=0 currentPosition=0 11:50:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:50:12 Filter is already there-color wheel unchanged 11:50:12 Received message from Master: op=Shutter serial=104974 11:50:12 Shutter LASER close 11:50:12 Received message from Camera: op=State serial=104976 11:50:12 GetSingleValue result=40 Value=cccccccc 11:50:12 SkyScan query 11:50:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:50:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:13 Parameters OK 11:50:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:13 Set A/D data flow result=40 11:50:13 Set A/D channel type result=40 11:50:13 Set A/D encoding result=40 11:50:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:13 Set channel filter=0.000000e+000 result=40 11:50:13 Config A/D Result=40 11:50:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:13 Get A/D filter: -9.255963e+061 result=40 11:50:13 Get A/D value=-858993460 result=40 11:50:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:13 Parameters OK 11:50:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:13 Set A/D data flow result=40 11:50:13 Set A/D channel type result=40 11:50:13 Set A/D encoding result=40 11:50:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:13 Set channel filter=0.000000e+000 result=40 11:50:13 Config A/D Result=40 11:50:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:13 Get A/D filter: -9.255963e+061 result=40 11:50:13 Get A/D value=-858993460 result=40 11:50:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:50:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:50:13 Aux= 11:50:13 Message to Camera, serial 104976 queued 11:50:50 Received message from Master: op=PointingHead serial=104989 11:50:50 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:50:50 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:50:50 Point started: ret=0 11:50:50 point_skyscan result=0 11:50:51 Check angles 11:50:51 SkyScan query 11:50:51 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 11:50:51 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 11:50:52 Check angles 11:50:52 SkyScan query 11:50:52 SkyScan query done: ret=0 az=153.45<-10230 ze=-6.495<-12433 Statuses=0009 0008 11:50:52 Msec=750 True Az=153.45 Ze=-6.495 Az status=0009 Ze status=0008 11:50:52 Check angles 11:50:52 SkyScan query 11:50:53 SkyScan query done: ret=0 az=170.865<-11391 ze=-6.495<-12433 Statuses=0009 0008 11:50:53 Msec=1500 True Az=170.865 Ze=-6.495 Az status=0009 Ze status=0008 11:50:53 Check angles 11:50:53 SkyScan query 11:50:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:50:54 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:50:54 Message to Master queued w/err=0: serial=104989 error=0 11:50:59 Received message from Master: op=Filter serial=104990 11:50:59 Color wheel filter change from 0 to 0 11:50:59 FLIGetFilterPos err=0 currentPosition=0 11:50:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:50:59 Filter is already there-color wheel unchanged 11:50:59 Received message from Master: op=Shutter serial=104991 11:50:59 Shutter LASER close 11:50:59 Received message from Camera: op=State serial=104993 11:50:59 GetSingleValue result=40 Value=cccccccc 11:50:59 SkyScan query 11:50:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:50:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:59 Parameters OK 11:50:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:59 Set A/D data flow result=40 11:50:59 Set A/D channel type result=40 11:50:59 Set A/D encoding result=40 11:50:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:59 Set channel filter=0.000000e+000 result=40 11:50:59 Config A/D Result=40 11:50:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:59 Get A/D filter: -9.255963e+061 result=40 11:50:59 Get A/D value=-858993460 result=40 11:50:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:59 Parameters OK 11:50:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:59 Set A/D data flow result=40 11:50:59 Set A/D channel type result=40 11:50:59 Set A/D encoding result=40 11:50:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:59 Set channel filter=0.000000e+000 result=40 11:50:59 Config A/D Result=40 11:50:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:59 Get A/D filter: -9.255963e+061 result=40 11:50:59 Get A/D value=-858993460 result=40 11:50:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:50:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:50:59 Aux= 11:50:59 Message to Camera, serial 104993 queued 11:51:36 Received message from Master: op=PointingHead serial=105006 11:51:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:51:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:51:37 Point started: ret=0 11:51:37 point_skyscan result=0 11:51:37 Check angles 11:51:37 SkyScan query 11:51:38 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 11:51:38 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 11:51:38 Check angles 11:51:38 SkyScan query 11:51:39 SkyScan query done: ret=0 az=135.495<-9033 ze=6.495<-11567 Statuses=0009 0008 11:51:39 Msec=750 True Az=135.495 Ze=6.495 Az status=0009 Ze status=0008 11:51:39 Check angles 11:51:39 SkyScan query 11:51:39 SkyScan query done: ret=0 az=118.05<-7870 ze=6.495<-11567 Statuses=0009 0008 11:51:39 Msec=1500 True Az=118.05 Ze=6.495 Az status=0009 Ze status=0008 11:51:40 Check angles 11:51:40 SkyScan query 11:51:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:51:40 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:51:40 Message to Master queued w/err=0: serial=105006 error=0 11:51:45 Received message from Master: op=Filter serial=105007 11:51:45 Color wheel filter change from 0 to 0 11:51:45 FLIGetFilterPos err=0 currentPosition=0 11:51:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:51:45 Filter is already there-color wheel unchanged 11:51:45 Received message from Master: op=Shutter serial=105008 11:51:45 Shutter LASER close 11:51:45 Received message from Camera: op=State serial=105010 11:51:45 GetSingleValue result=40 Value=cccccccc 11:51:45 SkyScan query 11:51:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:51:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:46 Parameters OK 11:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:46 Set A/D data flow result=40 11:51:46 Set A/D channel type result=40 11:51:46 Set A/D encoding result=40 11:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:46 Set channel filter=0.000000e+000 result=40 11:51:46 Config A/D Result=40 11:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:46 Get A/D filter: -9.255963e+061 result=40 11:51:46 Get A/D value=-858993460 result=40 11:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:46 Parameters OK 11:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:46 Set A/D data flow result=40 11:51:46 Set A/D channel type result=40 11:51:46 Set A/D encoding result=40 11:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:46 Set channel filter=0.000000e+000 result=40 11:51:46 Config A/D Result=40 11:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:46 Get A/D filter: -9.255963e+061 result=40 11:51:46 Get A/D value=-858993460 result=40 11:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:46 Aux= 11:51:46 Message to Camera, serial 105010 queued 11:52:23 Received message from Master: op=PointingHead serial=105023 11:52:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:52:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:52:23 Point started: ret=0 11:52:23 point_skyscan result=0 11:52:24 Check angles 11:52:24 SkyScan query 11:52:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 11:52:24 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 11:52:25 Check angles 11:52:25 SkyScan query 11:52:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.055<-14937 Statuses=0008 0009 11:52:25 Msec=750 True Az=112.995 Ze=-44.055 Az status=0008 Ze status=0009 11:52:25 Check angles 11:52:25 SkyScan query 11:52:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.95<-16330 Statuses=0008 0009 11:52:26 Msec=1500 True Az=112.995 Ze=-64.95 Az status=0008 Ze status=0009 11:52:26 Check angles 11:52:26 SkyScan query 11:52:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.01<-17734 Statuses=0008 0009 11:52:27 Msec=2250 True Az=112.995 Ze=-86.01 Az status=0008 Ze status=0009 11:52:27 Check angles 11:52:27 SkyScan query 11:52:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.83<-19122 Statuses=0008 0009 11:52:27 Msec=3000 True Az=112.995 Ze=-106.83 Az status=0008 Ze status=0009 11:52:28 Check angles 11:52:28 SkyScan query 11:52:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.8<-20520 Statuses=0008 0009 11:52:28 Msec=3750 True Az=112.995 Ze=-127.8 Az status=0008 Ze status=0009 11:52:28 Check angles 11:52:28 SkyScan query 11:52:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.74<-21916 Statuses=0008 0009 11:52:29 Msec=4500 True Az=112.995 Ze=-148.74 Az status=0008 Ze status=0009 11:52:29 Check angles 11:52:29 SkyScan query 11:52:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.68<-23312 Statuses=0008 0009 11:52:30 Msec=5250 True Az=112.995 Ze=-169.68 Az status=0008 Ze status=0009 11:52:30 Check angles 11:52:30 SkyScan query 11:52:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:52:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:52:30 Message to Master queued w/err=0: serial=105023 error=0 11:52:35 Received message from Master: op=Filter serial=105024 11:52:35 Color wheel filter change from 0 to 0 11:52:35 FLIGetFilterPos err=0 currentPosition=0 11:52:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:52:35 Filter is already there-color wheel unchanged 11:52:36 Received message from Master: op=Shutter serial=105025 11:52:36 Shutter LASER open 11:52:36 Received message from Camera: op=State serial=105027 11:52:36 GetSingleValue result=40 Value=cccccccc 11:52:36 SkyScan query 11:52:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:52:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:36 Parameters OK 11:52:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:36 Set A/D data flow result=40 11:52:36 Set A/D channel type result=40 11:52:36 Set A/D encoding result=40 11:52:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:36 Set channel filter=0.000000e+000 result=40 11:52:36 Config A/D Result=40 11:52:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:36 Get A/D filter: -9.255963e+061 result=40 11:52:36 Get A/D value=-858993460 result=40 11:52:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:36 Parameters OK 11:52:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:36 Set A/D data flow result=40 11:52:36 Set A/D channel type result=40 11:52:36 Set A/D encoding result=40 11:52:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:36 Set channel filter=0.000000e+000 result=40 11:52:36 Config A/D Result=40 11:52:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:36 Get A/D filter: -9.255963e+061 result=40 11:52:36 Get A/D value=-858993460 result=40 11:52:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:52:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:52:36 Aux= 11:52:36 Message to Camera, serial 105027 queued 11:52:45 Received message from Master: op=Shutter serial=105037 11:52:45 Shutter LASER close 11:52:45 Received message from Master: op=PointingHead serial=105041 11:52:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:52:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:52:46 Point started: ret=0 11:52:46 point_skyscan result=0 11:52:46 Check angles 11:52:46 SkyScan query 11:52:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 11:52:47 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 11:52:47 Check angles 11:52:47 SkyScan query 11:52:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.92<-20128 Statuses=0008 0009 11:52:48 Msec=750 True Az=112.995 Ze=-121.92 Az status=0008 Ze status=0009 11:52:48 Check angles 11:52:48 SkyScan query 11:52:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.01<-18734 Statuses=0008 0009 11:52:48 Msec=1500 True Az=112.995 Ze=-101.01 Az status=0008 Ze status=0009 11:52:49 Check angles 11:52:49 SkyScan query 11:52:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.04<-17336 Statuses=0008 0009 11:52:49 Msec=2250 True Az=112.995 Ze=-80.04 Az status=0008 Ze status=0009 11:52:49 Check angles 11:52:49 SkyScan query 11:52:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.605<-15907 Statuses=0008 0009 11:52:50 Msec=3000 True Az=112.995 Ze=-58.605 Az status=0008 Ze status=0009 11:52:50 Check angles 11:52:50 SkyScan query 11:52:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.65<-14510 Statuses=0008 0009 11:52:51 Msec=3750 True Az=112.995 Ze=-37.65 Az status=0008 Ze status=0009 11:52:51 Check angles 11:52:51 SkyScan query 11:52:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.695<-13113 Statuses=0008 0009 11:52:51 Msec=4500 True Az=112.995 Ze=-16.695 Az status=0008 Ze status=0009 11:52:52 Check angles 11:52:52 SkyScan query 11:52:52 SkyScan query done: ret=0 az=113.01<-7534 ze=4.215<-11719 Statuses=0008 0009 11:52:52 Msec=5250 True Az=113.01 Ze=4.215 Az status=0008 Ze status=0009 11:52:52 Check angles 11:52:52 SkyScan query 11:52:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:52:53 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:52:53 Message to Master queued w/err=0: serial=105041 error=0 11:52:58 Received message from Master: op=Filter serial=105042 11:52:58 Color wheel filter change from 0 to 0 11:52:58 FLIGetFilterPos err=0 currentPosition=0 11:52:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:52:58 Filter is already there-color wheel unchanged 11:52:58 Received message from Master: op=Shutter serial=105043 11:52:58 Shutter LASER close 11:52:58 Received message from Camera: op=State serial=105045 11:52:58 GetSingleValue result=40 Value=cccccccc 11:52:58 SkyScan query 11:52:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:52:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:59 Parameters OK 11:52:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:59 Set A/D data flow result=40 11:52:59 Set A/D channel type result=40 11:52:59 Set A/D encoding result=40 11:52:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:59 Set channel filter=0.000000e+000 result=40 11:52:59 Config A/D Result=40 11:52:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:59 Get A/D filter: -9.255963e+061 result=40 11:52:59 Get A/D value=-858993460 result=40 11:52:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:59 Parameters OK 11:52:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:59 Set A/D data flow result=40 11:52:59 Set A/D channel type result=40 11:52:59 Set A/D encoding result=40 11:52:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:59 Set channel filter=0.000000e+000 result=40 11:52:59 Config A/D Result=40 11:52:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:59 Get A/D filter: -9.255963e+061 result=40 11:52:59 Get A/D value=-858993460 result=40 11:52:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:52:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:52:59 Aux= 11:52:59 Message to Camera, serial 105045 queued 11:53:36 Received message from Master: op=PointingHead serial=105058 11:53:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:53:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:53:36 Point started: ret=0 11:53:36 point_skyscan result=0 11:53:37 Check angles 11:53:37 SkyScan query 11:53:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:53:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:53:37 Message to Master queued w/err=0: serial=105058 error=0 11:53:42 Received message from Master: op=Filter serial=105059 11:53:42 Color wheel filter change from 0 to 0 11:53:42 FLIGetFilterPos err=0 currentPosition=0 11:53:42 FLIGetStepsRemaining err=0 RemainingSteps=0 11:53:42 Filter is already there-color wheel unchanged 11:53:43 Received message from Master: op=Shutter serial=105060 11:53:43 Shutter LASER close 11:53:43 Received message from Camera: op=State serial=105062 11:53:43 GetSingleValue result=40 Value=cccccccc 11:53:43 SkyScan query 11:53:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:53:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:43 Parameters OK 11:53:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:43 Set A/D data flow result=40 11:53:43 Set A/D channel type result=40 11:53:43 Set A/D encoding result=40 11:53:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:43 Set channel filter=0.000000e+000 result=40 11:53:43 Config A/D Result=40 11:53:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:43 Get A/D filter: -9.255963e+061 result=40 11:53:43 Get A/D value=-858993460 result=40 11:53:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:43 Parameters OK 11:53:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:43 Set A/D data flow result=40 11:53:43 Set A/D channel type result=40 [UTC 2019-3-4 11:53:43] 11:53:43 Set A/D encoding result=40 11:53:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:43 Set channel filter=0.000000e+000 result=40 11:53:43 Config A/D Result=40 11:53:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:43 Get A/D filter: -9.255963e+061 result=40 11:53:43 Get A/D value=-858993460 result=40 11:53:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:53:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:53:43 Aux= 11:53:43 Message to Camera, serial 105062 queued 11:54:20 Received message from Master: op=PointingHead serial=105075 11:54:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:54:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:54:20 Point started: ret=0 11:54:20 point_skyscan result=0 11:54:21 Check angles 11:54:21 SkyScan query 11:54:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:54:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:54:22 Message to Master queued w/err=0: serial=105075 error=0 11:54:27 Received message from Master: op=Filter serial=105076 11:54:27 Color wheel filter change from 0 to 0 11:54:27 FLIGetFilterPos err=0 currentPosition=0 11:54:27 FLIGetStepsRemaining err=0 RemainingSteps=0 11:54:27 Filter is already there-color wheel unchanged 11:54:27 Received message from Master: op=Shutter serial=105077 11:54:27 Shutter LASER close 11:54:27 Received message from Camera: op=State serial=105079 11:54:27 GetSingleValue result=40 Value=cccccccc 11:54:27 SkyScan query 11:54:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:54:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:27 Parameters OK 11:54:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:27 Set A/D data flow result=40 11:54:27 Set A/D channel type result=40 11:54:27 Set A/D encoding result=40 11:54:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:27 Set channel filter=0.000000e+000 result=40 11:54:27 Config A/D Result=40 11:54:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:27 Get A/D filter: -9.255963e+061 result=40 11:54:27 Get A/D value=-858993460 result=40 11:54:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:27 Parameters OK 11:54:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:27 Set A/D data flow result=40 11:54:27 Set A/D channel type result=40 11:54:27 Set A/D encoding result=40 11:54:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:27 Set channel filter=0.000000e+000 result=40 11:54:27 Config A/D Result=40 11:54:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:27 Get A/D filter: -9.255963e+061 result=40 11:54:27 Get A/D value=-858993460 result=40 11:54:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:54:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:54:27 Aux= 11:54:27 Message to Camera, serial 105079 queued 11:55:04 Received message from Master: op=PointingHead serial=105092 11:55:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:55:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:55:05 Point started: ret=0 11:55:05 point_skyscan result=0 11:55:05 Check angles 11:55:05 SkyScan query 11:55:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:55:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:55:06 Message to Master queued w/err=0: serial=105092 error=0 11:55:11 Received message from Master: op=Filter serial=105093 11:55:11 Color wheel filter change from 0 to 0 11:55:11 FLIGetFilterPos err=0 currentPosition=0 11:55:11 FLIGetStepsRemaining err=0 RemainingSteps=0 11:55:11 Filter is already there-color wheel unchanged 11:55:11 Received message from Master: op=Shutter serial=105094 11:55:11 Shutter LASER close 11:55:11 Received message from Camera: op=State serial=105096 11:55:11 GetSingleValue result=40 Value=cccccccc 11:55:11 SkyScan query 11:55:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:55:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:12 Parameters OK 11:55:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:12 Set A/D data flow result=40 11:55:12 Set A/D channel type result=40 11:55:12 Set A/D encoding result=40 11:55:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:12 Set channel filter=0.000000e+000 result=40 11:55:12 Config A/D Result=40 11:55:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:12 Get A/D filter: -9.255963e+061 result=40 11:55:12 Get A/D value=-858993460 result=40 11:55:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:12 Parameters OK 11:55:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:12 Set A/D data flow result=40 11:55:12 Set A/D channel type result=40 11:55:12 Set A/D encoding result=40 11:55:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:12 Set channel filter=0.000000e+000 result=40 11:55:12 Config A/D Result=40 11:55:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:12 Get A/D filter: -9.255963e+061 result=40 11:55:12 Get A/D value=-858993460 result=40 11:55:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:55:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:55:12 Aux= 11:55:12 Message to Camera, serial 105096 queued 11:55:49 Received message from Master: op=PointingHead serial=105109 11:55:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:55:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:55:49 Point started: ret=0 11:55:49 point_skyscan result=0 11:55:50 Check angles 11:55:50 SkyScan query 11:55:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.505<-13567 Statuses=0008 0009 11:55:50 Msec=0 True Az=112.995 Ze=-23.505 Az status=0008 Ze status=0009 11:55:50 Check angles 11:55:50 SkyScan query 11:55:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.46<-14964 Statuses=0008 0009 11:55:51 Msec=750 True Az=112.995 Ze=-44.46 Az status=0008 Ze status=0009 11:55:51 Check angles 11:55:51 SkyScan query 11:55:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.4<-16360 Statuses=0008 0009 11:55:52 Msec=1500 True Az=112.995 Ze=-65.4 Az status=0008 Ze status=0009 11:55:52 Check angles 11:55:52 SkyScan query 11:55:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.355<-17757 Statuses=0008 0009 11:55:53 Msec=2250 True Az=112.995 Ze=-86.355 Az status=0008 Ze status=0009 11:55:53 Check angles 11:55:53 SkyScan query 11:55:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.295<-19153 Statuses=0008 0009 11:55:53 Msec=3000 True Az=112.995 Ze=-107.295 Az status=0008 Ze status=0009 11:55:53 Check angles 11:55:53 SkyScan query 11:55:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.265<-20551 Statuses=0008 0009 11:55:54 Msec=3750 True Az=112.995 Ze=-128.265 Az status=0008 Ze status=0009 11:55:54 Check angles 11:55:54 SkyScan query 11:55:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.25<-21950 Statuses=0008 0009 11:55:55 Msec=4500 True Az=112.995 Ze=-149.25 Az status=0008 Ze status=0009 11:55:55 Check angles 11:55:55 SkyScan query 11:55:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.175<-23345 Statuses=0008 0009 11:55:56 Msec=5250 True Az=112.995 Ze=-170.175 Az status=0008 Ze status=0009 11:55:56 Check angles 11:55:56 SkyScan query 11:55:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:55:56 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:55:56 Message to Master queued w/err=0: serial=105109 error=0 11:56:01 Received message from Master: op=Filter serial=105110 11:56:01 Color wheel filter change from 0 to 0 11:56:01 FLIGetFilterPos err=0 currentPosition=0 11:56:01 FLIGetStepsRemaining err=0 RemainingSteps=0 11:56:01 Filter is already there-color wheel unchanged 11:56:01 Received message from Master: op=Shutter serial=105111 11:56:01 Shutter LASER open 11:56:02 Received message from Camera: op=State serial=105113 11:56:02 GetSingleValue result=40 Value=cccccccc 11:56:02 SkyScan query 11:56:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:56:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:02 Parameters OK 11:56:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:02 Set A/D data flow result=40 11:56:02 Set A/D channel type result=40 11:56:02 Set A/D encoding result=40 11:56:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:02 Set channel filter=0.000000e+000 result=40 11:56:02 Config A/D Result=40 11:56:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:02 Get A/D filter: -9.255963e+061 result=40 11:56:02 Get A/D value=-858993460 result=40 11:56:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:02 Parameters OK 11:56:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:02 Set A/D data flow result=40 11:56:02 Set A/D channel type result=40 11:56:02 Set A/D encoding result=40 11:56:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:02 Set channel filter=0.000000e+000 result=40 11:56:02 Config A/D Result=40 11:56:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:02 Get A/D filter: -9.255963e+061 result=40 11:56:02 Get A/D value=-858993460 result=40 11:56:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:56:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:56:02 Aux= 11:56:02 Message to Camera, serial 105113 queued 11:56:11 Received message from Master: op=Shutter serial=105123 11:56:11 Shutter LASER close 11:56:11 Received message from Master: op=PointingHead serial=105127 11:56:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:56:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:56:12 Point started: ret=0 11:56:12 point_skyscan result=0 11:56:12 Check angles 11:56:12 SkyScan query 11:56:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 11:56:13 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 11:56:13 Check angles 11:56:13 SkyScan query 11:56:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.635<-20109 Statuses=0008 0009 11:56:14 Msec=750 True Az=112.995 Ze=-121.635 Az status=0008 Ze status=0009 11:56:14 Check angles 11:56:14 SkyScan query 11:56:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.695<-18713 Statuses=0008 0009 11:56:14 Msec=1500 True Az=112.995 Ze=-100.695 Az status=0008 Ze status=0009 11:56:15 Check angles 11:56:15 SkyScan query 11:56:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.71<-17314 Statuses=0008 0009 11:56:15 Msec=2250 True Az=112.995 Ze=-79.71 Az status=0008 Ze status=0009 11:56:15 Check angles 11:56:15 SkyScan query 11:56:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.335<-15889 Statuses=0008 0009 11:56:16 Msec=3000 True Az=112.995 Ze=-58.335 Az status=0008 Ze status=0009 11:56:16 Check angles 11:56:16 SkyScan query 11:56:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.44<-14496 Statuses=0008 0009 11:56:17 Msec=3750 True Az=112.995 Ze=-37.44 Az status=0008 Ze status=0009 11:56:17 Check angles 11:56:17 SkyScan query 11:56:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.455<-13097 Statuses=0008 0009 11:56:17 Msec=4500 True Az=112.995 Ze=-16.455 Az status=0008 Ze status=0009 11:56:18 Check angles 11:56:18 SkyScan query 11:56:18 SkyScan query done: ret=0 az=112.995<-7533 ze=4.395<-11707 Statuses=0008 0009 11:56:18 Msec=5250 True Az=112.995 Ze=4.395 Az status=0008 Ze status=0009 11:56:18 Check angles 11:56:18 SkyScan query 11:56:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:56:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:56:19 Message to Master queued w/err=0: serial=105127 error=0 11:56:24 Received message from Master: op=Filter serial=105128 11:56:24 Color wheel filter change from 0 to 0 11:56:24 FLIGetFilterPos err=0 currentPosition=0 11:56:24 FLIGetStepsRemaining err=0 RemainingSteps=0 11:56:24 Filter is already there-color wheel unchanged 11:56:24 Received message from Master: op=Shutter serial=105129 11:56:24 Shutter LASER close 11:56:24 Received message from Camera: op=State serial=105131 11:56:24 GetSingleValue result=40 Value=cccccccc 11:56:24 SkyScan query 11:56:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:56:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:25 Parameters OK 11:56:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:25 Set A/D data flow result=40 11:56:25 Set A/D channel type result=40 11:56:25 Set A/D encoding result=40 11:56:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:25 Set channel filter=0.000000e+000 result=40 11:56:25 Config A/D Result=40 11:56:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:25 Get A/D filter: -9.255963e+061 result=40 11:56:25 Get A/D value=-858993460 result=40 11:56:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:25 Parameters OK 11:56:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:25 Set A/D data flow result=40 11:56:25 Set A/D channel type result=40 11:56:25 Set A/D encoding result=40 11:56:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:25 Set channel filter=0.000000e+000 result=40 11:56:25 Config A/D Result=40 11:56:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:25 Get A/D filter: -9.255963e+061 result=40 11:56:25 Get A/D value=-858993460 result=40 11:56:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:56:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:56:25 Aux= 11:56:25 Message to Camera, serial 105131 queued 11:57:02 Received message from Master: op=PointingHead serial=105144 11:57:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:57:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:57:02 Point started: ret=0 11:57:02 point_skyscan result=0 11:57:03 Check angles 11:57:03 SkyScan query 11:57:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:57:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:57:03 Message to Master queued w/err=0: serial=105144 error=0 11:57:08 Received message from Master: op=Filter serial=105145 11:57:08 Color wheel filter change from 0 to 0 11:57:08 FLIGetFilterPos err=0 currentPosition=0 11:57:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:08 Filter is already there-color wheel unchanged 11:57:09 Received message from Master: op=Shutter serial=105146 11:57:09 Shutter LASER close 11:57:09 Received message from Camera: op=State serial=105148 11:57:09 GetSingleValue result=40 Value=cccccccc 11:57:09 SkyScan query 11:57:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:57:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:09 Parameters OK 11:57:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:09 Set A/D data flow result=40 11:57:09 Set A/D channel type result=40 11:57:09 Set A/D encoding result=40 11:57:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:09 Set channel filter=0.000000e+000 result=40 11:57:09 Config A/D Result=40 11:57:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:09 Get A/D filter: -9.255963e+061 result=40 11:57:09 Get A/D value=-858993460 result=40 11:57:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:09 Parameters OK 11:57:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:09 Set A/D data flow result=40 11:57:09 Set A/D channel type result=40 11:57:09 Set A/D encoding result=40 11:57:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:09 Set channel filter=0.000000e+000 result=40 11:57:09 Config A/D Result=40 11:57:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:09 Get A/D filter: -9.255963e+061 result=40 11:57:09 Get A/D value=-858993460 result=40 11:57:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:09 Aux= 11:57:09 Message to Camera, serial 105148 queued 11:57:46 Received message from Master: op=PointingHead serial=105161 11:57:46 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:57:46 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:57:46 Point started: ret=0 11:57:46 point_skyscan result=0 11:57:47 Check angles 11:57:47 SkyScan query 11:57:48 SkyScan query done: ret=0 az=136.38<-9092 ze=-6.51<-12434 Statuses=0009 0008 11:57:48 Msec=0 True Az=136.38 Ze=-6.51 Az status=0009 Ze status=0008 11:57:48 Check angles 11:57:48 SkyScan query 11:57:48 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.51<-12434 Statuses=0009 0008 11:57:48 Msec=750 True Az=153.93 Ze=-6.51 Az status=0009 Ze status=0008 11:57:49 Check angles 11:57:49 SkyScan query 11:57:49 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.51<-12434 Statuses=0009 0008 11:57:49 Msec=1500 True Az=171.345 Ze=-6.51 Az status=0009 Ze status=0008 11:57:49 Check angles 11:57:49 SkyScan query 11:57:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:57:50 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 11:57:50 Message to Master queued w/err=0: serial=105161 error=0 11:57:55 Received message from Master: op=Filter serial=105162 11:57:55 Color wheel filter change from 0 to 0 11:57:55 FLIGetFilterPos err=0 currentPosition=0 11:57:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:55 Filter is already there-color wheel unchanged 11:57:55 Received message from Master: op=Shutter serial=105163 11:57:55 Shutter LASER close 11:57:55 Received message from Camera: op=State serial=105165 11:57:55 GetSingleValue result=40 Value=cccccccc 11:57:55 SkyScan query 11:57:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:57:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:56 Parameters OK 11:57:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:56 Set A/D data flow result=40 11:57:56 Set A/D channel type result=40 11:57:56 Set A/D encoding result=40 11:57:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:56 Set channel filter=0.000000e+000 result=40 11:57:56 Config A/D Result=40 11:57:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:56 Get A/D filter: -9.255963e+061 result=40 11:57:56 Get A/D value=-858993460 result=40 11:57:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:56 Parameters OK 11:57:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:56 Set A/D data flow result=40 11:57:56 Set A/D channel type result=40 11:57:56 Set A/D encoding result=40 11:57:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:56 Set channel filter=0.000000e+000 result=40 11:57:56 Config A/D Result=40 11:57:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:56 Get A/D filter: -9.255963e+061 result=40 11:57:56 Get A/D value=-858993460 result=40 11:57:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:56 Aux= 11:57:56 Message to Camera, serial 105165 queued 11:58:33 Received message from Master: op=PointingHead serial=105178 11:58:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:58:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:58:33 Point started: ret=0 11:58:33 point_skyscan result=0 11:58:34 Check angles 11:58:34 SkyScan query 11:58:34 SkyScan query done: ret=0 az=153.24<-10216 ze=6.51<-11566 Statuses=0009 0008 11:58:34 Msec=0 True Az=153.24 Ze=6.51 Az status=0009 Ze status=0008 11:58:34 Check angles 11:58:34 SkyScan query 11:58:35 SkyScan query done: ret=0 az=135.375<-9025 ze=6.495<-11567 Statuses=0009 0008 11:58:35 Msec=750 True Az=135.375 Ze=6.495 Az status=0009 Ze status=0008 11:58:35 Check angles 11:58:35 SkyScan query 11:58:36 SkyScan query done: ret=0 az=117.93<-7862 ze=6.495<-11567 Statuses=0009 0008 11:58:36 Msec=1500 True Az=117.93 Ze=6.495 Az status=0009 Ze status=0008 11:58:36 Check angles 11:58:36 SkyScan query 11:58:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:58:36 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:58:36 Message to Master queued w/err=0: serial=105178 error=0 11:58:41 Received message from Master: op=Filter serial=105179 11:58:41 Color wheel filter change from 0 to 0 11:58:41 FLIGetFilterPos err=0 currentPosition=0 11:58:41 FLIGetStepsRemaining err=0 RemainingSteps=0 11:58:41 Filter is already there-color wheel unchanged 11:58:42 Received message from Master: op=Shutter serial=105180 11:58:42 Shutter LASER close 11:58:42 Received message from Camera: op=State serial=105182 11:58:42 GetSingleValue result=40 Value=cccccccc 11:58:42 SkyScan query 11:58:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:58:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:42 Parameters OK 11:58:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:42 Set A/D data flow result=40 11:58:42 Set A/D channel type result=40 11:58:42 Set A/D encoding result=40 11:58:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:42 Set channel filter=0.000000e+000 result=40 11:58:42 Config A/D Result=40 11:58:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:42 Get A/D filter: -9.255963e+061 result=40 11:58:42 Get A/D value=-858993460 result=40 11:58:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:42 Parameters OK 11:58:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:42 Set A/D data flow result=40 11:58:42 Set A/D channel type result=40 11:58:42 Set A/D encoding result=40 11:58:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:42 Set channel filter=0.000000e+000 result=40 11:58:42 Config A/D Result=40 11:58:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:42 Get A/D filter: -9.255963e+061 result=40 11:58:42 Get A/D value=-858993460 result=40 11:58:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:58:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:58:42 Aux= 11:58:42 Message to Camera, serial 105182 queued 11:59:19 Received message from Master: op=PointingHead serial=105195 11:59:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:59:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:59:19 Point started: ret=0 11:59:19 point_skyscan result=0 11:59:20 Check angles 11:59:20 SkyScan query 11:59:21 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.115<-13541 Statuses=0008 0009 11:59:21 Msec=0 True Az=112.98 Ze=-23.115 Az status=0008 Ze status=0009 11:59:21 Check angles 11:59:21 SkyScan query 11:59:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.1<-14940 Statuses=0008 0009 11:59:22 Msec=750 True Az=112.995 Ze=-44.1 Az status=0008 Ze status=0009 11:59:22 Check angles 11:59:22 SkyScan query 11:59:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.025<-16335 Statuses=0008 0009 11:59:22 Msec=1500 True Az=112.995 Ze=-65.025 Az status=0008 Ze status=0009 11:59:22 Check angles 11:59:22 SkyScan query 11:59:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.385<-17759 Statuses=0008 0009 11:59:23 Msec=2250 True Az=112.995 Ze=-86.385 Az status=0008 Ze status=0009 11:59:23 Check angles 11:59:23 SkyScan query 11:59:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.355<-19157 Statuses=0008 0009 11:59:24 Msec=3000 True Az=112.995 Ze=-107.355 Az status=0008 Ze status=0009 11:59:24 Check angles 11:59:24 SkyScan query 11:59:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.295<-20553 Statuses=0008 0009 11:59:25 Msec=3750 True Az=112.995 Ze=-128.295 Az status=0008 Ze status=0009 11:59:25 Check angles 11:59:25 SkyScan query 11:59:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.745<-21983 Statuses=0008 0009 11:59:25 Msec=4500 True Az=112.995 Ze=-149.745 Az status=0008 Ze status=0009 11:59:25 Check angles 11:59:25 SkyScan query 11:59:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.64<-23376 Statuses=0008 0009 11:59:26 Msec=5250 True Az=112.995 Ze=-170.64 Az status=0008 Ze status=0009 11:59:26 Check angles 11:59:26 SkyScan query 11:59:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:59:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:59:27 Message to Master queued w/err=0: serial=105195 error=0 11:59:32 Received message from Master: op=Filter serial=105196 11:59:32 Color wheel filter change from 0 to 0 11:59:32 FLIGetFilterPos err=0 currentPosition=0 11:59:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:32 Filter is already there-color wheel unchanged 11:59:32 Received message from Master: op=Shutter serial=105197 11:59:32 Shutter LASER open 11:59:32 Received message from Camera: op=State serial=105199 11:59:32 GetSingleValue result=40 Value=cccccccc 11:59:32 SkyScan query 11:59:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:59:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:33 Parameters OK 11:59:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:33 Set A/D data flow result=40 11:59:33 Set A/D channel type result=40 11:59:33 Set A/D encoding result=40 11:59:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:33 Set channel filter=0.000000e+000 result=40 11:59:33 Config A/D Result=40 11:59:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:33 Get A/D filter: -9.255963e+061 result=40 11:59:33 Get A/D value=-858993460 result=40 11:59:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:33 Parameters OK 11:59:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:33 Set A/D data flow result=40 11:59:33 Set A/D channel type result=40 11:59:33 Set A/D encoding result=40 11:59:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:33 Set channel filter=0.000000e+000 result=40 11:59:33 Config A/D Result=40 11:59:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:33 Get A/D filter: -9.255963e+061 result=40 11:59:33 Get A/D value=-858993460 result=40 11:59:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:33 Aux= 11:59:33 Message to Camera, serial 105199 queued 11:59:40 Received message from Master: op=Shutter serial=105208 11:59:40 Shutter LASER close 11:59:41 Received message from Master: op=PointingHead serial=105212 11:59:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:59:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:59:41 Point started: ret=0 11:59:41 point_skyscan result=0 11:59:42 Check angles 11:59:42 SkyScan query 11:59:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.98<-21532 Statuses=0008 0009 11:59:42 Msec=0 True Az=112.995 Ze=-142.98 Az status=0008 Ze status=0009 11:59:43 Check angles 11:59:43 SkyScan query 11:59:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.545<-20103 Statuses=0008 0009 11:59:43 Msec=750 True Az=112.995 Ze=-121.545 Az status=0008 Ze status=0009 11:59:43 Check angles 11:59:43 SkyScan query 11:59:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.59<-18706 Statuses=0008 0009 11:59:44 Msec=1500 True Az=112.995 Ze=-100.59 Az status=0008 Ze status=0009 11:59:44 Check angles 11:59:44 SkyScan query 11:59:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.605<-17307 Statuses=0008 0009 11:59:45 Msec=2250 True Az=112.995 Ze=-79.605 Az status=0008 Ze status=0009 11:59:45 Check angles 11:59:45 SkyScan query 11:59:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.215<-15881 Statuses=0008 0009 11:59:45 Msec=3000 True Az=112.995 Ze=-58.215 Az status=0008 Ze status=0009 11:59:46 Check angles 11:59:46 SkyScan query 11:59:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.9<-14460 Statuses=0008 0009 11:59:46 Msec=3750 True Az=112.995 Ze=-36.9 Az status=0008 Ze status=0009 11:59:46 Check angles 11:59:46 SkyScan query 11:59:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.915<-13061 Statuses=0008 0009 11:59:47 Msec=4500 True Az=112.995 Ze=-15.915 Az status=0008 Ze status=0009 11:59:47 Check angles 11:59:47 SkyScan query 11:59:48 SkyScan query done: ret=0 az=112.995<-7533 ze=4.8<-11680 Statuses=0008 0009 11:59:48 Msec=5250 True Az=112.995 Ze=4.8 Az status=0008 Ze status=0009 11:59:48 Check angles 11:59:48 SkyScan query 11:59:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:59:48 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:59:48 Message to Master queued w/err=0: serial=105212 error=0 11:59:53 Received message from Master: op=Filter serial=105213 11:59:53 Color wheel filter change from 0 to 0 11:59:53 FLIGetFilterPos err=0 currentPosition=0 11:59:53 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:53 Filter is already there-color wheel unchanged 11:59:54 Received message from Master: op=Shutter serial=105214 11:59:54 Shutter LASER close 11:59:54 Received message from Camera: op=State serial=105216 11:59:54 GetSingleValue result=40 Value=cccccccc 11:59:54 SkyScan query 11:59:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:59:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:54 Parameters OK 11:59:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:54 Set A/D data flow result=40 11:59:54 Set A/D channel type result=40 11:59:54 Set A/D encoding result=40 11:59:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:54 Set channel filter=0.000000e+000 result=40 11:59:54 Config A/D Result=40 11:59:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:54 Get A/D filter: -9.255963e+061 result=40 11:59:54 Get A/D value=-858993460 result=40 11:59:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:54 Parameters OK 11:59:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:54 Set A/D data flow result=40 11:59:54 Set A/D channel type result=40 11:59:54 Set A/D encoding result=40 11:59:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:54 Set channel filter=0.000000e+000 result=40 11:59:54 Config A/D Result=40 11:59:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:54 Get A/D filter: -9.255963e+061 result=40 11:59:54 Get A/D value=-858993460 result=40 11:59:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:54 Aux= 11:59:54 Message to Camera, serial 105216 queued 12:00:31 Received message from Master: op=PointingHead serial=105229 12:00:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:00:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:00:31 Point started: ret=0 12:00:31 point_skyscan result=0 12:00:32 Check angles 12:00:32 SkyScan query 12:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:00:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:00:33 Message to Master queued w/err=0: serial=105229 error=0 12:00:38 Received message from Master: op=Filter serial=105230 12:00:38 Color wheel filter change from 0 to 0 12:00:38 FLIGetFilterPos err=0 currentPosition=0 12:00:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:00:38 Filter is already there-color wheel unchanged 12:00:38 Received message from Master: op=Shutter serial=105231 12:00:38 Shutter LASER close 12:00:38 Received message from Camera: op=State serial=105233 12:00:38 GetSingleValue result=40 Value=cccccccc 12:00:38 SkyScan query 12:00:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:00:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:39 Parameters OK 12:00:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:39 Set A/D data flow result=40 12:00:39 Set A/D channel type result=40 12:00:39 Set A/D encoding result=40 12:00:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:39 Set channel filter=0.000000e+000 result=40 12:00:39 Config A/D Result=40 12:00:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:39 Get A/D filter: -9.255963e+061 result=40 12:00:39 Get A/D value=-858993460 result=40 12:00:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:39 Parameters OK 12:00:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:39 Set A/D data flow result=40 12:00:39 Set A/D channel type result=40 12:00:39 Set A/D encoding result=40 12:00:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:39 Set channel filter=0.000000e+000 result=40 12:00:39 Config A/D Result=40 12:00:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:39 Get A/D filter: -9.255963e+061 result=40 12:00:39 Get A/D value=-858993460 result=40 12:00:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:00:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:00:39 Aux= 12:00:39 Message to Camera, serial 105233 queued 12:01:15 Received message from Master: op=PointingHead serial=105246 12:01:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:01:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:01:16 Point started: ret=0 12:01:16 point_skyscan result=0 12:01:17 Check angles 12:01:17 SkyScan query 12:01:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:01:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:01:17 Message to Master queued w/err=0: serial=105246 error=0 12:01:22 Received message from Master: op=Filter serial=105247 12:01:22 Color wheel filter change from 0 to 0 12:01:22 FLIGetFilterPos err=0 currentPosition=0 12:01:22 FLIGetStepsRemaining err=0 RemainingSteps=0 12:01:22 Filter is already there-color wheel unchanged 12:01:22 Received message from Master: op=Shutter serial=105248 12:01:22 Shutter LASER close 12:01:22 Received message from Camera: op=State serial=105250 12:01:22 GetSingleValue result=40 Value=cccccccc 12:01:22 SkyScan query 12:01:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:01:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:23 Parameters OK 12:01:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:23 Set A/D data flow result=40 12:01:23 Set A/D channel type result=40 12:01:23 Set A/D encoding result=40 12:01:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:23 Set channel filter=0.000000e+000 result=40 12:01:23 Config A/D Result=40 12:01:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:23 Get A/D filter: -9.255963e+061 result=40 12:01:23 Get A/D value=-858993460 result=40 12:01:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:23 Parameters OK 12:01:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:23 Set A/D data flow result=40 12:01:23 Set A/D channel type result=40 12:01:23 Set A/D encoding result=40 12:01:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:23 Set channel filter=0.000000e+000 result=40 12:01:23 Config A/D Result=40 12:01:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:23 Get A/D filter: -9.255963e+061 result=40 12:01:23 Get A/D value=-858993460 result=40 12:01:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:01:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:01:23 Aux= 12:01:23 Message to Camera, serial 105250 queued 12:01:59 Received message from Master: op=PointingHead serial=105262 12:01:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:01:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:01:59 Point started: ret=0 12:01:59 point_skyscan result=0 12:02:00 Check angles 12:02:00 SkyScan query 12:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:02:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:02:00 Message to Master queued w/err=0: serial=105262 error=0 12:02:05 Received message from Master: op=Filter serial=105263 12:02:05 Color wheel filter change from 0 to 0 12:02:05 FLIGetFilterPos err=0 currentPosition=0 12:02:05 FLIGetStepsRemaining err=0 RemainingSteps=0 12:02:05 Filter is already there-color wheel unchanged 12:02:06 Received message from Master: op=Shutter serial=105264 12:02:06 Shutter LASER close 12:02:06 Received message from Camera: op=State serial=105266 12:02:06 GetSingleValue result=40 Value=cccccccc 12:02:06 SkyScan query 12:02:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:02:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:06 Parameters OK 12:02:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:06 Set A/D data flow result=40 12:02:06 Set A/D channel type result=40 12:02:06 Set A/D encoding result=40 12:02:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:06 Set channel filter=0.000000e+000 result=40 12:02:06 Config A/D Result=40 12:02:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:06 Get A/D filter: -9.255963e+061 result=40 12:02:06 Get A/D value=-858993460 result=40 12:02:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:06 Parameters OK 12:02:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:06 Set A/D data flow result=40 12:02:06 Set A/D channel type result=40 12:02:06 Set A/D encoding result=40 12:02:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:06 Set channel filter=0.000000e+000 result=40 12:02:06 Config A/D Result=40 12:02:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:06 Get A/D filter: -9.255963e+061 result=40 12:02:06 Get A/D value=-858993460 result=40 12:02:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:02:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:02:06 Aux= 12:02:06 Message to Camera, serial 105266 queued 12:02:43 Received message from Master: op=PointingHead serial=105279 12:02:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:02:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:02:43 Point started: ret=0 12:02:43 point_skyscan result=0 12:02:44 Check angles 12:02:44 SkyScan query 12:02:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.475<-13565 Statuses=0008 0009 12:02:45 Msec=0 True Az=112.995 Ze=-23.475 Az status=0008 Ze status=0009 12:02:45 Check angles 12:02:45 SkyScan query 12:02:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 12:02:46 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 12:02:46 Check angles 12:02:46 SkyScan query 12:02:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.37<-16358 Statuses=0008 0009 12:02:46 Msec=1500 True Az=112.995 Ze=-65.37 Az status=0008 Ze status=0009 12:02:46 Check angles 12:02:46 SkyScan query 12:02:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 12:02:47 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 12:02:47 Check angles 12:02:47 SkyScan query 12:02:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.265<-19151 Statuses=0008 0009 12:02:48 Msec=3000 True Az=112.995 Ze=-107.265 Az status=0008 Ze status=0009 12:02:48 Check angles 12:02:48 SkyScan query 12:02:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.235<-20549 Statuses=0008 0009 12:02:49 Msec=3750 True Az=112.995 Ze=-128.235 Az status=0008 Ze status=0009 12:02:49 Check angles 12:02:49 SkyScan query 12:02:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.67<-21978 Statuses=0008 0009 12:02:49 Msec=4500 True Az=112.995 Ze=-149.67 Az status=0008 Ze status=0009 12:02:49 Check angles 12:02:49 SkyScan query 12:02:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.595<-23373 Statuses=0008 0009 12:02:50 Msec=5250 True Az=112.995 Ze=-170.595 Az status=0008 Ze status=0009 12:02:50 Check angles 12:02:50 SkyScan query 12:02:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:02:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:02:51 Message to Master queued w/err=0: serial=105279 error=0 12:02:56 Received message from Master: op=Filter serial=105280 12:02:56 Color wheel filter change from 0 to 0 12:02:56 FLIGetFilterPos err=0 currentPosition=0 12:02:56 FLIGetStepsRemaining err=0 RemainingSteps=0 12:02:56 Filter is already there-color wheel unchanged 12:02:56 Received message from Master: op=Shutter serial=105281 12:02:56 Shutter LASER open 12:02:56 Received message from Camera: op=State serial=105283 12:02:56 GetSingleValue result=40 Value=cccccccc 12:02:56 SkyScan query 12:02:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:02:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:57 Parameters OK 12:02:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:57 Set A/D data flow result=40 12:02:57 Set A/D channel type result=40 12:02:57 Set A/D encoding result=40 12:02:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:57 Set channel filter=0.000000e+000 result=40 12:02:57 Config A/D Result=40 12:02:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:57 Get A/D filter: -9.255963e+061 result=40 12:02:57 Get A/D value=-858993460 result=40 12:02:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:57 Parameters OK 12:02:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:57 Set A/D data flow result=40 12:02:57 Set A/D channel type result=40 12:02:57 Set A/D encoding result=40 12:02:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:57 Set channel filter=0.000000e+000 result=40 12:02:57 Config A/D Result=40 12:02:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:57 Get A/D filter: -9.255963e+061 result=40 12:02:57 Get A/D value=-858993460 result=40 12:02:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:02:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:02:57 Aux= 12:02:57 Message to Camera, serial 105283 queued 12:03:05 Received message from Master: op=Shutter serial=105293 12:03:05 Shutter LASER close 12:03:06 Received message from Master: op=PointingHead serial=105297 12:03:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:03:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:03:06 Point started: ret=0 12:03:06 point_skyscan result=0 12:03:07 Check angles 12:03:07 SkyScan query 12:03:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.83<-21522 Statuses=0008 0009 12:03:07 Msec=0 True Az=112.995 Ze=-142.83 Az status=0008 Ze status=0009 12:03:08 Check angles 12:03:08 SkyScan query 12:03:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 12:03:08 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 12:03:08 Check angles 12:03:08 SkyScan query 12:03:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 12:03:09 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 12:03:09 Check angles 12:03:09 SkyScan query 12:03:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.965<-17331 Statuses=0008 0009 12:03:10 Msec=2250 True Az=112.995 Ze=-79.965 Az status=0008 Ze status=0009 12:03:10 Check angles 12:03:10 SkyScan query 12:03:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.01<-15934 Statuses=0008 0009 12:03:10 Msec=3000 True Az=112.995 Ze=-59.01 Az status=0008 Ze status=0009 12:03:11 Check angles 12:03:11 SkyScan query 12:03:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.605<-14507 Statuses=0008 0009 12:03:11 Msec=3750 True Az=112.995 Ze=-37.605 Az status=0008 Ze status=0009 12:03:11 Check angles 12:03:11 SkyScan query 12:03:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.635<-13109 Statuses=0008 0009 12:03:12 Msec=4500 True Az=112.995 Ze=-16.635 Az status=0008 Ze status=0009 12:03:12 Check angles 12:03:12 SkyScan query 12:03:13 SkyScan query done: ret=0 az=112.995<-7533 ze=4.26<-11716 Statuses=0008 0009 12:03:13 Msec=5250 True Az=112.995 Ze=4.26 Az status=0008 Ze status=0009 12:03:13 Check angles 12:03:13 SkyScan query 12:03:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:03:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:03:13 Message to Master queued w/err=0: serial=105297 error=0 12:03:18 Received message from Master: op=Filter serial=105298 12:03:18 Color wheel filter change from 0 to 0 12:03:18 FLIGetFilterPos err=0 currentPosition=0 12:03:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:03:18 Filter is already there-color wheel unchanged 12:03:19 Received message from Master: op=Shutter serial=105299 12:03:19 Shutter LASER close 12:03:19 Received message from Camera: op=State serial=105301 12:03:19 GetSingleValue result=40 Value=cccccccc 12:03:19 SkyScan query 12:03:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:03:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:19 Parameters OK 12:03:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:19 Set A/D data flow result=40 12:03:19 Set A/D channel type result=40 12:03:19 Set A/D encoding result=40 12:03:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:19 Set channel filter=0.000000e+000 result=40 12:03:19 Config A/D Result=40 12:03:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:19 Get A/D filter: -9.255963e+061 result=40 12:03:19 Get A/D value=-858993460 result=40 12:03:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:19 Parameters OK 12:03:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:19 Set A/D data flow result=40 12:03:19 Set A/D channel type result=40 12:03:19 Set A/D encoding result=40 12:03:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:19 Set channel filter=0.000000e+000 result=40 12:03:19 Config A/D Result=40 12:03:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:19 Get A/D filter: -9.255963e+061 result=40 12:03:19 Get A/D value=-858993460 result=40 12:03:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:03:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:03:19 Aux= 12:03:19 Message to Camera, serial 105301 queued 12:03:38 Received message from Master: op=Identify serial=105302 [UTC 2019-3-4 12:03:50] 12:03:56 Received message from Master: op=PointingHead serial=105317 12:03:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:03:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:03:57 Point started: ret=0 12:03:57 point_skyscan result=0 12:03:57 Check angles 12:03:57 SkyScan query 12:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:03:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:03:58 Message to Master queued w/err=0: serial=105317 error=0 12:04:03 Received message from Master: op=Filter serial=105318 12:04:03 Color wheel filter change from 0 to 0 12:04:03 FLIGetFilterPos err=0 currentPosition=0 12:04:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:03 Filter is already there-color wheel unchanged 12:04:03 Received message from Master: op=Shutter serial=105319 12:04:03 Shutter LASER close 12:04:03 Received message from Camera: op=State serial=105321 12:04:03 GetSingleValue result=40 Value=cccccccc 12:04:03 SkyScan query 12:04:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:04:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:04 Parameters OK 12:04:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:04 Set A/D data flow result=40 12:04:04 Set A/D channel type result=40 12:04:04 Set A/D encoding result=40 12:04:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:04 Set channel filter=0.000000e+000 result=40 12:04:04 Config A/D Result=40 12:04:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:04 Get A/D filter: -9.255963e+061 result=40 12:04:04 Get A/D value=-858993460 result=40 12:04:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:04 Parameters OK 12:04:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:04 Set A/D data flow result=40 12:04:04 Set A/D channel type result=40 12:04:04 Set A/D encoding result=40 12:04:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:04 Set channel filter=0.000000e+000 result=40 12:04:04 Config A/D Result=40 12:04:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:04 Get A/D filter: -9.255963e+061 result=40 12:04:04 Get A/D value=-858993460 result=40 12:04:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:04:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:04:04 Aux= 12:04:04 Message to Camera, serial 105321 queued 12:04:41 Received message from Master: op=PointingHead serial=105334 12:04:41 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:04:41 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:04:41 Point started: ret=0 12:04:41 point_skyscan result=0 12:04:42 Check angles 12:04:42 SkyScan query 12:04:42 SkyScan query done: ret=0 az=135.75<-9050 ze=-6.51<-12434 Statuses=0009 0008 12:04:42 Msec=0 True Az=135.75 Ze=-6.51 Az status=0009 Ze status=0008 12:04:42 Check angles 12:04:42 SkyScan query 12:04:43 SkyScan query done: ret=0 az=153.33<-10222 ze=-6.51<-12434 Statuses=0009 0008 12:04:43 Msec=750 True Az=153.33 Ze=-6.51 Az status=0009 Ze status=0008 12:04:43 Check angles 12:04:43 SkyScan query 12:04:44 SkyScan query done: ret=0 az=170.715<-11381 ze=-6.495<-12433 Statuses=0009 0008 12:04:44 Msec=1500 True Az=170.715 Ze=-6.495 Az status=0009 Ze status=0008 12:04:44 Check angles 12:04:44 SkyScan query 12:04:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:04:44 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:04:44 Message to Master queued w/err=0: serial=105334 error=0 12:04:49 Received message from Master: op=Filter serial=105335 12:04:49 Color wheel filter change from 0 to 0 12:04:49 FLIGetFilterPos err=0 currentPosition=0 12:04:49 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:49 Filter is already there-color wheel unchanged 12:04:50 Received message from Master: op=Shutter serial=105336 12:04:50 Shutter LASER close 12:04:50 Received message from Camera: op=State serial=105338 12:04:50 GetSingleValue result=40 Value=cccccccc 12:04:50 SkyScan query 12:04:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:04:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:50 Parameters OK 12:04:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:50 Set A/D data flow result=40 12:04:50 Set A/D channel type result=40 12:04:50 Set A/D encoding result=40 12:04:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:50 Set channel filter=0.000000e+000 result=40 12:04:50 Config A/D Result=40 12:04:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:50 Get A/D filter: -9.255963e+061 result=40 12:04:50 Get A/D value=-858993460 result=40 12:04:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:50 Parameters OK 12:04:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:50 Set A/D data flow result=40 12:04:50 Set A/D channel type result=40 12:04:50 Set A/D encoding result=40 12:04:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:50 Set channel filter=0.000000e+000 result=40 12:04:50 Config A/D Result=40 12:04:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:50 Get A/D filter: -9.255963e+061 result=40 12:04:50 Get A/D value=-858993460 result=40 12:04:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:04:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:04:50 Aux= 12:04:50 Message to Camera, serial 105338 queued 12:05:27 Received message from Master: op=PointingHead serial=105351 12:05:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:05:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:05:27 Point started: ret=0 12:05:27 point_skyscan result=0 12:05:28 Check angles 12:05:28 SkyScan query 12:05:29 SkyScan query done: ret=0 az=152.94<-10196 ze=6.51<-11566 Statuses=0009 0008 12:05:29 Msec=0 True Az=152.94 Ze=6.51 Az status=0009 Ze status=0008 12:05:29 Check angles 12:05:29 SkyScan query 12:05:30 SkyScan query done: ret=0 az=135.39<-9026 ze=6.495<-11567 Statuses=0009 0008 12:05:30 Msec=750 True Az=135.39 Ze=6.495 Az status=0009 Ze status=0008 12:05:30 Check angles 12:05:30 SkyScan query 12:05:30 SkyScan query done: ret=0 az=117.975<-7865 ze=6.495<-11567 Statuses=0009 0008 12:05:30 Msec=1500 True Az=117.975 Ze=6.495 Az status=0009 Ze status=0008 12:05:30 Check angles 12:05:30 SkyScan query 12:05:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:05:31 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:05:31 Message to Master queued w/err=0: serial=105351 error=0 12:05:36 Received message from Master: op=Filter serial=105352 12:05:36 Color wheel filter change from 0 to 0 12:05:36 FLIGetFilterPos err=0 currentPosition=0 12:05:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:05:36 Filter is already there-color wheel unchanged 12:05:36 Received message from Master: op=Shutter serial=105353 12:05:36 Shutter LASER close 12:05:36 Received message from Camera: op=State serial=105355 12:05:36 GetSingleValue result=40 Value=cccccccc 12:05:36 SkyScan query 12:05:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:05:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:37 Parameters OK 12:05:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:37 Set A/D data flow result=40 12:05:37 Set A/D channel type result=40 12:05:37 Set A/D encoding result=40 12:05:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:37 Set channel filter=0.000000e+000 result=40 12:05:37 Config A/D Result=40 12:05:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:37 Get A/D filter: -9.255963e+061 result=40 12:05:37 Get A/D value=-858993460 result=40 12:05:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:37 Parameters OK 12:05:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:37 Set A/D data flow result=40 12:05:37 Set A/D channel type result=40 12:05:37 Set A/D encoding result=40 12:05:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:37 Set channel filter=0.000000e+000 result=40 12:05:37 Config A/D Result=40 12:05:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:37 Get A/D filter: -9.255963e+061 result=40 12:05:37 Get A/D value=-858993460 result=40 12:05:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:05:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:05:37 Aux= 12:05:37 Message to Camera, serial 105355 queued 12:06:14 Received message from Master: op=PointingHead serial=105368 12:06:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:06:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:06:14 Point started: ret=0 12:06:14 point_skyscan result=0 12:06:15 Check angles 12:06:15 SkyScan query 12:06:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 12:06:15 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 12:06:16 Check angles 12:06:16 SkyScan query 12:06:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.28<-14952 Statuses=0008 0009 12:06:16 Msec=750 True Az=112.995 Ze=-44.28 Az status=0008 Ze status=0009 12:06:16 Check angles 12:06:16 SkyScan query 12:06:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.64<-16376 Statuses=0008 0009 12:06:17 Msec=1500 True Az=112.995 Ze=-65.64 Az status=0008 Ze status=0009 12:06:17 Check angles 12:06:17 SkyScan query 12:06:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 12:06:18 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 12:06:18 Check angles 12:06:18 SkyScan query 12:06:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.61<-19174 Statuses=0008 0009 12:06:18 Msec=3000 True Az=112.995 Ze=-107.61 Az status=0008 Ze status=0009 12:06:19 Check angles 12:06:19 SkyScan query 12:06:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.985<-20599 Statuses=0008 0009 12:06:19 Msec=3750 True Az=112.995 Ze=-128.985 Az status=0008 Ze status=0009 12:06:19 Check angles 12:06:19 SkyScan query 12:06:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.94<-21996 Statuses=0008 0009 12:06:20 Msec=4500 True Az=112.995 Ze=-149.94 Az status=0008 Ze status=0009 12:06:20 Check angles 12:06:20 SkyScan query 12:06:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 12:06:21 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 12:06:21 Check angles 12:06:21 SkyScan query 12:06:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:06:21 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:06:21 Message to Master queued w/err=0: serial=105368 error=0 12:06:26 Received message from Master: op=Filter serial=105369 12:06:26 Color wheel filter change from 0 to 0 12:06:26 FLIGetFilterPos err=0 currentPosition=0 12:06:26 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:26 Filter is already there-color wheel unchanged 12:06:27 Received message from Master: op=Shutter serial=105370 12:06:27 Shutter LASER open 12:06:27 Received message from Camera: op=State serial=105372 12:06:27 GetSingleValue result=40 Value=cccccccc 12:06:27 SkyScan query 12:06:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:06:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:27 Parameters OK 12:06:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:27 Set A/D data flow result=40 12:06:27 Set A/D channel type result=40 12:06:27 Set A/D encoding result=40 12:06:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:27 Set channel filter=0.000000e+000 result=40 12:06:27 Config A/D Result=40 12:06:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:27 Get A/D filter: -9.255963e+061 result=40 12:06:27 Get A/D value=-858993460 result=40 12:06:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:27 Parameters OK 12:06:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:27 Set A/D data flow result=40 12:06:27 Set A/D channel type result=40 12:06:27 Set A/D encoding result=40 12:06:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:27 Set channel filter=0.000000e+000 result=40 12:06:27 Config A/D Result=40 12:06:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:27 Get A/D filter: -9.255963e+061 result=40 12:06:27 Get A/D value=-858993460 result=40 12:06:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:27 Aux= 12:06:27 Message to Camera, serial 105372 queued 12:06:36 Received message from Master: op=Shutter serial=105382 12:06:36 Shutter LASER close 12:06:36 Received message from Master: op=PointingHead serial=105386 12:06:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:06:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:06:37 Point started: ret=0 12:06:37 point_skyscan result=0 12:06:37 Check angles 12:06:37 SkyScan query 12:06:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 12:06:38 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 12:06:38 Check angles 12:06:38 SkyScan query 12:06:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.565<-20171 Statuses=0008 0009 12:06:39 Msec=750 True Az=112.995 Ze=-122.565 Az status=0008 Ze status=0009 12:06:39 Check angles 12:06:39 SkyScan query 12:06:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.19<-18746 Statuses=0008 0009 12:06:39 Msec=1500 True Az=112.995 Ze=-101.19 Az status=0008 Ze status=0009 12:06:40 Check angles 12:06:40 SkyScan query 12:06:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.205<-17347 Statuses=0008 0009 12:06:40 Msec=2250 True Az=112.995 Ze=-80.205 Az status=0008 Ze status=0009 12:06:40 Check angles 12:06:40 SkyScan query 12:06:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.785<-15919 Statuses=0008 0009 12:06:41 Msec=3000 True Az=112.995 Ze=-58.785 Az status=0008 Ze status=0009 12:06:41 Check angles 12:06:41 SkyScan query 12:06:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.785<-14519 Statuses=0008 0009 12:06:42 Msec=3750 True Az=112.995 Ze=-37.785 Az status=0008 Ze status=0009 12:06:42 Check angles 12:06:42 SkyScan query 12:06:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.845<-13123 Statuses=0008 0009 12:06:42 Msec=4500 True Az=112.995 Ze=-16.845 Az status=0008 Ze status=0009 12:06:43 Check angles 12:06:43 SkyScan query 12:06:43 SkyScan query done: ret=0 az=112.995<-7533 ze=4.395<-11707 Statuses=0008 0009 12:06:43 Msec=5250 True Az=112.995 Ze=4.395 Az status=0008 Ze status=0009 12:06:43 Check angles 12:06:43 SkyScan query 12:06:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:06:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:06:44 Message to Master queued w/err=0: serial=105386 error=0 12:06:49 Received message from Master: op=Filter serial=105387 12:06:49 Color wheel filter change from 0 to 0 12:06:49 FLIGetFilterPos err=0 currentPosition=0 12:06:49 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:49 Filter is already there-color wheel unchanged 12:06:49 Received message from Master: op=Shutter serial=105388 12:06:49 Shutter LASER close 12:06:49 Received message from Camera: op=State serial=105390 12:06:49 GetSingleValue result=40 Value=cccccccc 12:06:49 SkyScan query 12:06:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:06:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:50 Parameters OK 12:06:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:50 Set A/D data flow result=40 12:06:50 Set A/D channel type result=40 12:06:50 Set A/D encoding result=40 12:06:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:50 Set channel filter=0.000000e+000 result=40 12:06:50 Config A/D Result=40 12:06:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:50 Get A/D filter: -9.255963e+061 result=40 12:06:50 Get A/D value=-858993460 result=40 12:06:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:50 Parameters OK 12:06:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:50 Set A/D data flow result=40 12:06:50 Set A/D channel type result=40 12:06:50 Set A/D encoding result=40 12:06:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:50 Set channel filter=0.000000e+000 result=40 12:06:50 Config A/D Result=40 12:06:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:50 Get A/D filter: -9.255963e+061 result=40 12:06:50 Get A/D value=-858993460 result=40 12:06:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:50 Aux= 12:06:50 Message to Camera, serial 105390 queued 12:07:27 Received message from Master: op=PointingHead serial=105403 12:07:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:07:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:07:27 Point started: ret=0 12:07:27 point_skyscan result=0 12:07:28 Check angles 12:07:28 SkyScan query 12:07:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:07:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:07:28 Message to Master queued w/err=0: serial=105403 error=0 12:07:33 Received message from Master: op=Filter serial=105404 12:07:33 Color wheel filter change from 0 to 0 12:07:33 FLIGetFilterPos err=0 currentPosition=0 12:07:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:07:33 Filter is already there-color wheel unchanged 12:07:33 Received message from Master: op=Shutter serial=105405 12:07:33 Shutter LASER close 12:07:34 Received message from Camera: op=State serial=105407 12:07:34 GetSingleValue result=40 Value=cccccccc 12:07:34 SkyScan query 12:07:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:07:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:34 Parameters OK 12:07:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:34 Set A/D data flow result=40 12:07:34 Set A/D channel type result=40 12:07:34 Set A/D encoding result=40 12:07:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:34 Set channel filter=0.000000e+000 result=40 12:07:34 Config A/D Result=40 12:07:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:34 Get A/D filter: -9.255963e+061 result=40 12:07:34 Get A/D value=-858993460 result=40 12:07:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:34 Parameters OK 12:07:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:34 Set A/D data flow result=40 12:07:34 Set A/D channel type result=40 12:07:34 Set A/D encoding result=40 12:07:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:34 Set channel filter=0.000000e+000 result=40 12:07:34 Config A/D Result=40 12:07:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:34 Get A/D filter: -9.255963e+061 result=40 12:07:34 Get A/D value=-858993460 result=40 12:07:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:07:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:07:34 Aux= 12:07:34 Message to Camera, serial 105407 queued 12:08:11 Received message from Master: op=PointingHead serial=105420 12:08:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:08:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:08:11 Point started: ret=0 12:08:11 point_skyscan result=0 12:08:12 Check angles 12:08:12 SkyScan query 12:08:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:08:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:08:13 Message to Master queued w/err=0: serial=105420 error=0 12:08:18 Received message from Master: op=Filter serial=105421 12:08:18 Color wheel filter change from 0 to 0 12:08:18 FLIGetFilterPos err=0 currentPosition=0 12:08:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:08:18 Filter is already there-color wheel unchanged 12:08:18 Received message from Master: op=Shutter serial=105422 12:08:18 Shutter LASER close 12:08:18 Received message from Camera: op=State serial=105424 12:08:18 GetSingleValue result=40 Value=cccccccc 12:08:18 SkyScan query 12:08:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:08:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:18 Parameters OK 12:08:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:18 Set A/D data flow result=40 12:08:18 Set A/D channel type result=40 12:08:18 Set A/D encoding result=40 12:08:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:18 Set channel filter=0.000000e+000 result=40 12:08:18 Config A/D Result=40 12:08:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:18 Get A/D filter: -9.255963e+061 result=40 12:08:18 Get A/D value=-858993460 result=40 12:08:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:18 Parameters OK 12:08:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:18 Set A/D data flow result=40 12:08:18 Set A/D channel type result=40 12:08:18 Set A/D encoding result=40 12:08:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:18 Set channel filter=0.000000e+000 result=40 12:08:18 Config A/D Result=40 12:08:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:18 Get A/D filter: -9.255963e+061 result=40 12:08:18 Get A/D value=-858993460 result=40 12:08:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:08:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:08:18 Aux= 12:08:18 Message to Camera, serial 105424 queued 12:08:55 Received message from Master: op=PointingHead serial=105437 12:08:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:08:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:08:56 Point started: ret=0 12:08:56 point_skyscan result=0 12:08:56 Check angles 12:08:56 SkyScan query 12:08:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:08:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:08:57 Message to Master queued w/err=0: serial=105437 error=0 12:09:02 Received message from Master: op=Filter serial=105438 12:09:02 Color wheel filter change from 0 to 0 12:09:02 FLIGetFilterPos err=0 currentPosition=0 12:09:02 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:02 Filter is already there-color wheel unchanged 12:09:02 Received message from Master: op=Shutter serial=105439 12:09:02 Shutter LASER close 12:09:02 Received message from Camera: op=State serial=105441 12:09:02 GetSingleValue result=40 Value=cccccccc 12:09:02 SkyScan query 12:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:09:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:03 Parameters OK 12:09:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:03 Set A/D data flow result=40 12:09:03 Set A/D channel type result=40 12:09:03 Set A/D encoding result=40 12:09:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:03 Set channel filter=0.000000e+000 result=40 12:09:03 Config A/D Result=40 12:09:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:03 Get A/D filter: -9.255963e+061 result=40 12:09:03 Get A/D value=-858993460 result=40 12:09:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:03 Parameters OK 12:09:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:03 Set A/D data flow result=40 12:09:03 Set A/D channel type result=40 12:09:03 Set A/D encoding result=40 12:09:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:03 Set channel filter=0.000000e+000 result=40 12:09:03 Config A/D Result=40 12:09:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:03 Get A/D filter: -9.255963e+061 result=40 12:09:03 Get A/D value=-858993460 result=40 12:09:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:03 Aux= 12:09:03 Message to Camera, serial 105441 queued 12:09:40 Received message from Master: op=PointingHead serial=105454 12:09:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:09:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:09:40 Point started: ret=0 12:09:40 point_skyscan result=0 12:09:41 Check angles 12:09:41 SkyScan query 12:09:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 12:09:41 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 12:09:41 Check angles 12:09:41 SkyScan query 12:09:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 12:09:42 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 12:09:42 Check angles 12:09:42 SkyScan query 12:09:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.19<-16346 Statuses=0008 0009 12:09:43 Msec=1500 True Az=112.995 Ze=-65.19 Az status=0008 Ze status=0009 12:09:43 Check angles 12:09:43 SkyScan query 12:09:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.145<-17743 Statuses=0008 0009 12:09:44 Msec=2250 True Az=112.995 Ze=-86.145 Az status=0008 Ze status=0009 12:09:44 Check angles 12:09:44 SkyScan query 12:09:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.535<-19169 Statuses=0008 0009 12:09:44 Msec=3000 True Az=112.995 Ze=-107.535 Az status=0008 Ze status=0009 12:09:44 Check angles 12:09:44 SkyScan query 12:09:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.49<-20566 Statuses=0008 0009 12:09:45 Msec=3750 True Az=112.995 Ze=-128.49 Az status=0008 Ze status=0009 12:09:45 Check angles 12:09:45 SkyScan query 12:09:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.475<-21965 Statuses=0008 0009 12:09:46 Msec=4500 True Az=112.995 Ze=-149.475 Az status=0008 Ze status=0009 12:09:46 Check angles 12:09:46 SkyScan query 12:09:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.805<-23387 Statuses=0008 0009 12:09:47 Msec=5250 True Az=112.995 Ze=-170.805 Az status=0008 Ze status=0009 12:09:47 Check angles 12:09:47 SkyScan query 12:09:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:09:47 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:09:47 Message to Master queued w/err=0: serial=105454 error=0 12:09:52 Received message from Master: op=Filter serial=105455 12:09:52 Color wheel filter change from 0 to 0 12:09:52 FLIGetFilterPos err=0 currentPosition=0 12:09:52 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:52 Filter is already there-color wheel unchanged 12:09:52 Received message from Master: op=Shutter serial=105456 12:09:52 Shutter LASER open 12:09:53 Received message from Camera: op=State serial=105458 12:09:53 GetSingleValue result=40 Value=cccccccc 12:09:53 SkyScan query 12:09:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:09:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:53 Parameters OK 12:09:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:53 Set A/D data flow result=40 12:09:53 Set A/D channel type result=40 12:09:53 Set A/D encoding result=40 12:09:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:53 Set channel filter=0.000000e+000 result=40 12:09:53 Config A/D Result=40 12:09:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:53 Get A/D filter: -9.255963e+061 result=40 12:09:53 Get A/D value=-858993460 result=40 12:09:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:53 Parameters OK 12:09:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:53 Set A/D data flow result=40 12:09:53 Set A/D channel type result=40 12:09:53 Set A/D encoding result=40 12:09:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:53 Set channel filter=0.000000e+000 result=40 12:09:53 Config A/D Result=40 12:09:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:53 Get A/D filter: -9.255963e+061 result=40 12:09:53 Get A/D value=-858993460 result=40 12:09:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:53 Aux= 12:09:53 Message to Camera, serial 105458 queued 12:10:02 Received message from Master: op=Shutter serial=105468 12:10:02 Shutter LASER close 12:10:02 Received message from Master: op=PointingHead serial=105472 12:10:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:10:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:10:03 Point started: ret=0 12:10:03 point_skyscan result=0 12:10:03 Check angles 12:10:03 SkyScan query 12:10:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 12:10:04 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 12:10:04 Check angles 12:10:04 SkyScan query 12:10:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 12:10:05 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 12:10:05 Check angles 12:10:05 SkyScan query 12:10:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 12:10:05 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 12:10:06 Check angles 12:10:06 SkyScan query 12:10:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 12:10:06 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 12:10:06 Check angles 12:10:06 SkyScan query 12:10:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 12:10:07 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 12:10:07 Check angles 12:10:07 SkyScan query 12:10:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.175<-14545 Statuses=0008 0009 12:10:08 Msec=3750 True Az=112.995 Ze=-38.175 Az status=0008 Ze status=0009 12:10:08 Check angles 12:10:08 SkyScan query 12:10:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.265<-13151 Statuses=0008 0009 12:10:08 Msec=4500 True Az=112.995 Ze=-17.265 Az status=0008 Ze status=0009 12:10:09 Check angles 12:10:09 SkyScan query 12:10:09 SkyScan query done: ret=0 az=112.995<-7533 ze=3.72<-11752 Statuses=0008 0009 12:10:09 Msec=5250 True Az=112.995 Ze=3.72 Az status=0008 Ze status=0009 12:10:09 Check angles 12:10:09 SkyScan query 12:10:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:10:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:10:10 Message to Master queued w/err=0: serial=105472 error=0 12:10:15 Received message from Master: op=Filter serial=105473 12:10:15 Color wheel filter change from 0 to 0 12:10:15 FLIGetFilterPos err=0 currentPosition=0 12:10:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:10:15 Filter is already there-color wheel unchanged 12:10:15 Received message from Master: op=Shutter serial=105474 12:10:15 Shutter LASER close 12:10:15 Received message from Camera: op=State serial=105476 12:10:15 GetSingleValue result=40 Value=cccccccc 12:10:15 SkyScan query 12:10:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:10:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:16 Parameters OK 12:10:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:16 Set A/D data flow result=40 12:10:16 Set A/D channel type result=40 12:10:16 Set A/D encoding result=40 12:10:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:16 Set channel filter=0.000000e+000 result=40 12:10:16 Config A/D Result=40 12:10:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:16 Get A/D filter: -9.255963e+061 result=40 12:10:16 Get A/D value=-858993460 result=40 12:10:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:16 Parameters OK 12:10:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:16 Set A/D data flow result=40 12:10:16 Set A/D channel type result=40 12:10:16 Set A/D encoding result=40 12:10:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:16 Set channel filter=0.000000e+000 result=40 12:10:16 Config A/D Result=40 12:10:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:16 Get A/D filter: -9.255963e+061 result=40 12:10:16 Get A/D value=-858993460 result=40 12:10:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:10:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:10:16 Aux= 12:10:16 Message to Camera, serial 105476 queued 12:10:53 Received message from Master: op=PointingHead serial=105489 12:10:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:10:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:10:53 Point started: ret=0 12:10:53 point_skyscan result=0 12:10:54 Check angles 12:10:54 SkyScan query 12:10:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:10:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:10:54 Message to Master queued w/err=0: serial=105489 error=0 12:10:59 Received message from Master: op=Filter serial=105490 12:10:59 Color wheel filter change from 0 to 0 12:10:59 FLIGetFilterPos err=0 currentPosition=0 12:10:59 FLIGetStepsRemaining err=0 RemainingSteps=0 12:10:59 Filter is already there-color wheel unchanged 12:11:00 Received message from Master: op=Shutter serial=105491 12:11:00 Shutter LASER close 12:11:00 Received message from Camera: op=State serial=105493 12:11:00 GetSingleValue result=40 Value=cccccccc 12:11:00 SkyScan query 12:11:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:11:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:00 Parameters OK 12:11:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:00 Set A/D data flow result=40 12:11:00 Set A/D channel type result=40 12:11:00 Set A/D encoding result=40 12:11:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:00 Set channel filter=0.000000e+000 result=40 12:11:00 Config A/D Result=40 12:11:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:00 Get A/D filter: -9.255963e+061 result=40 12:11:00 Get A/D value=-858993460 result=40 12:11:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:00 Parameters OK 12:11:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:00 Set A/D data flow result=40 12:11:00 Set A/D channel type result=40 12:11:00 Set A/D encoding result=40 12:11:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:00 Set channel filter=0.000000e+000 result=40 12:11:00 Config A/D Result=40 12:11:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:00 Get A/D filter: -9.255963e+061 result=40 12:11:00 Get A/D value=-858993460 result=40 12:11:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:00 Aux= 12:11:00 Message to Camera, serial 105493 queued 12:11:37 Received message from Master: op=PointingHead serial=105506 12:11:37 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:11:37 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:11:37 Point started: ret=0 12:11:37 point_skyscan result=0 12:11:38 Check angles 12:11:38 SkyScan query 12:11:39 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 12:11:39 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 12:11:39 Check angles 12:11:39 SkyScan query 12:11:39 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.495<-12433 Statuses=0009 0008 12:11:39 Msec=750 True Az=153.525 Ze=-6.495 Az status=0009 Ze status=0008 12:11:40 Check angles 12:11:40 SkyScan query 12:11:40 SkyScan query done: ret=0 az=170.97<-11398 ze=-6.495<-12433 Statuses=0009 0008 12:11:40 Msec=1500 True Az=170.97 Ze=-6.495 Az status=0009 Ze status=0008 12:11:40 Check angles 12:11:40 SkyScan query 12:11:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:11:41 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:11:41 Message to Master queued w/err=0: serial=105506 error=0 12:11:46 Received message from Master: op=Filter serial=105507 12:11:46 Color wheel filter change from 0 to 0 12:11:46 FLIGetFilterPos err=0 currentPosition=0 12:11:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:46 Filter is already there-color wheel unchanged 12:11:46 Received message from Master: op=Shutter serial=105508 12:11:46 Shutter LASER close 12:11:46 Received message from Camera: op=State serial=105510 12:11:46 GetSingleValue result=40 Value=cccccccc 12:11:46 SkyScan query 12:11:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:11:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:47 Parameters OK 12:11:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:47 Set A/D data flow result=40 12:11:47 Set A/D channel type result=40 12:11:47 Set A/D encoding result=40 12:11:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:47 Set channel filter=0.000000e+000 result=40 12:11:47 Config A/D Result=40 12:11:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:47 Get A/D filter: -9.255963e+061 result=40 12:11:47 Get A/D value=-858993460 result=40 12:11:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:47 Parameters OK 12:11:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:47 Set A/D data flow result=40 12:11:47 Set A/D channel type result=40 12:11:47 Set A/D encoding result=40 12:11:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:47 Set channel filter=0.000000e+000 result=40 12:11:47 Config A/D Result=40 12:11:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:47 Get A/D filter: -9.255963e+061 result=40 12:11:47 Get A/D value=-858993460 result=40 12:11:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:47 Aux= 12:11:47 Message to Camera, serial 105510 queued 12:12:23 Received message from Master: op=PointingHead serial=105522 12:12:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:12:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:12:23 Point started: ret=0 12:12:23 point_skyscan result=0 12:12:24 Check angles 12:12:24 SkyScan query 12:12:24 SkyScan query done: ret=0 az=153.165<-10211 ze=6.51<-11566 Statuses=0009 0008 12:12:24 Msec=0 True Az=153.165 Ze=6.51 Az status=0009 Ze status=0008 12:12:24 Check angles 12:12:24 SkyScan query 12:12:25 SkyScan query done: ret=0 az=135.21<-9014 ze=6.495<-11567 Statuses=0009 0008 12:12:25 Msec=750 True Az=135.21 Ze=6.495 Az status=0009 Ze status=0008 12:12:25 Check angles 12:12:25 SkyScan query 12:12:26 SkyScan query done: ret=0 az=117.75<-7850 ze=6.495<-11567 Statuses=0009 0008 12:12:26 Msec=1500 True Az=117.75 Ze=6.495 Az status=0009 Ze status=0008 12:12:26 Check angles 12:12:26 SkyScan query 12:12:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:12:26 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:12:26 Message to Master queued w/err=0: serial=105522 error=0 12:12:31 Received message from Master: op=Filter serial=105523 12:12:31 Color wheel filter change from 0 to 0 12:12:31 FLIGetFilterPos err=0 currentPosition=0 12:12:31 FLIGetStepsRemaining err=0 RemainingSteps=0 12:12:31 Filter is already there-color wheel unchanged 12:12:32 Received message from Master: op=Shutter serial=105524 12:12:32 Shutter LASER close 12:12:32 Received message from Camera: op=State serial=105526 12:12:32 GetSingleValue result=40 Value=cccccccc 12:12:32 SkyScan query 12:12:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:12:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:32 Parameters OK 12:12:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:32 Set A/D data flow result=40 12:12:32 Set A/D channel type result=40 12:12:32 Set A/D encoding result=40 12:12:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:32 Set channel filter=0.000000e+000 result=40 12:12:32 Config A/D Result=40 12:12:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:32 Get A/D filter: -9.255963e+061 result=40 12:12:32 Get A/D value=-858993460 result=40 12:12:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:32 Parameters OK 12:12:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:32 Set A/D data flow result=40 12:12:32 Set A/D channel type result=40 12:12:32 Set A/D encoding result=40 12:12:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:32 Set channel filter=0.000000e+000 result=40 12:12:32 Config A/D Result=40 12:12:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:32 Get A/D filter: -9.255963e+061 result=40 12:12:32 Get A/D value=-858993460 result=40 12:12:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:12:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:12:32 Aux= 12:12:32 Message to Camera, serial 105526 queued 12:13:09 Received message from Master: op=PointingHead serial=105539 12:13:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:13:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:13:09 Point started: ret=0 12:13:09 point_skyscan result=0 12:13:10 Check angles 12:13:10 SkyScan query 12:13:11 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.34<-13556 Statuses=0008 0009 12:13:11 Msec=0 True Az=112.98 Ze=-23.34 Az status=0008 Ze status=0009 12:13:11 Check angles 12:13:11 SkyScan query 12:13:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.31<-14954 Statuses=0008 0009 12:13:12 Msec=750 True Az=112.995 Ze=-44.31 Az status=0008 Ze status=0009 12:13:12 Check angles 12:13:12 SkyScan query 12:13:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.25<-16350 Statuses=0008 0009 12:13:12 Msec=1500 True Az=112.995 Ze=-65.25 Az status=0008 Ze status=0009 12:13:12 Check angles 12:13:12 SkyScan query 12:13:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.64<-17776 Statuses=0008 0009 12:13:13 Msec=2250 True Az=112.995 Ze=-86.64 Az status=0008 Ze status=0009 12:13:13 Check angles 12:13:13 SkyScan query 12:13:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 12:13:14 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 12:13:14 Check angles 12:13:14 SkyScan query 12:13:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.55<-20570 Statuses=0008 0009 12:13:15 Msec=3750 True Az=112.995 Ze=-128.55 Az status=0008 Ze status=0009 12:13:15 Check angles 12:13:15 SkyScan query 12:13:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.955<-21997 Statuses=0008 0009 12:13:15 Msec=4500 True Az=112.995 Ze=-149.955 Az status=0008 Ze status=0009 12:13:15 Check angles 12:13:15 SkyScan query 12:13:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.835<-23389 Statuses=0008 0009 12:13:16 Msec=5250 True Az=112.995 Ze=-170.835 Az status=0008 Ze status=0009 12:13:16 Check angles 12:13:16 SkyScan query 12:13:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:13:17 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:13:17 Message to Master queued w/err=0: serial=105539 error=0 12:13:22 Received message from Master: op=Filter serial=105540 12:13:22 Color wheel filter change from 0 to 0 12:13:22 FLIGetFilterPos err=0 currentPosition=0 12:13:22 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:22 Filter is already there-color wheel unchanged 12:13:22 Received message from Master: op=Shutter serial=105541 12:13:22 Shutter LASER open 12:13:22 Received message from Camera: op=State serial=105543 12:13:22 GetSingleValue result=40 Value=cccccccc 12:13:22 SkyScan query 12:13:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:13:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:23 Parameters OK 12:13:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:23 Set A/D data flow result=40 12:13:23 Set A/D channel type result=40 12:13:23 Set A/D encoding result=40 12:13:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:23 Set channel filter=0.000000e+000 result=40 12:13:23 Config A/D Result=40 12:13:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:23 Get A/D filter: -9.255963e+061 result=40 12:13:23 Get A/D value=-858993460 result=40 12:13:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:23 Parameters OK 12:13:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:23 Set A/D data flow result=40 12:13:23 Set A/D channel type result=40 12:13:23 Set A/D encoding result=40 12:13:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:23 Set channel filter=0.000000e+000 result=40 12:13:23 Config A/D Result=40 12:13:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:23 Get A/D filter: -9.255963e+061 result=40 12:13:23 Get A/D value=-858993460 result=40 12:13:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:23 Aux= 12:13:23 Message to Camera, serial 105543 queued 12:13:30 Received message from Master: op=Shutter serial=105552 12:13:30 Shutter LASER close 12:13:31 Received message from Master: op=PointingHead serial=105556 12:13:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:13:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:13:31 Point started: ret=0 12:13:31 point_skyscan result=0 12:13:32 Check angles 12:13:32 SkyScan query 12:13:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 12:13:32 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 12:13:33 Check angles 12:13:33 SkyScan query 12:13:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.98<-20132 Statuses=0008 0009 12:13:33 Msec=750 True Az=112.995 Ze=-121.98 Az status=0008 Ze status=0009 12:13:33 Check angles 12:13:33 SkyScan query 12:13:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.055<-18737 Statuses=0008 0009 12:13:34 Msec=1500 True Az=112.995 Ze=-101.055 Az status=0008 Ze status=0009 12:13:34 Check angles 12:13:34 SkyScan query 12:13:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 12:13:35 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 12:13:35 Check angles 12:13:35 SkyScan query 12:13:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.13<-15942 Statuses=0008 0009 12:13:35 Msec=3000 True Az=112.995 Ze=-59.13 Az status=0008 Ze status=0009 12:13:36 Check angles 12:13:36 SkyScan query 12:13:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.1<-14540 Statuses=0008 0009 12:13:36 Msec=3750 True Az=112.995 Ze=-38.1 Az status=0008 Ze status=0009 12:13:36 Check angles 12:13:36 SkyScan query 12:13:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.175<-13145 Statuses=0008 0009 12:13:37 Msec=4500 True Az=112.995 Ze=-17.175 Az status=0008 Ze status=0009 12:13:37 Check angles 12:13:37 SkyScan query 12:13:38 SkyScan query done: ret=0 az=112.995<-7533 ze=3.795<-11747 Statuses=0008 0009 12:13:38 Msec=5250 True Az=112.995 Ze=3.795 Az status=0008 Ze status=0009 12:13:38 Check angles 12:13:38 SkyScan query 12:13:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:13:38 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:13:38 Message to Master queued w/err=0: serial=105556 error=0 12:13:43 Received message from Master: op=Filter serial=105557 12:13:43 Color wheel filter change from 0 to 0 12:13:43 FLIGetFilterPos err=0 currentPosition=0 12:13:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:43 Filter is already there-color wheel unchanged 12:13:44 Received message from Master: op=Shutter serial=105558 12:13:44 Shutter LASER close 12:13:44 Received message from Camera: op=State serial=105560 12:13:44 GetSingleValue result=40 Value=cccccccc 12:13:44 SkyScan query 12:13:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:13:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:44 Parameters OK 12:13:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:44 Set A/D data flow result=40 12:13:44 Set A/D channel type result=40 12:13:44 Set A/D encoding result=40 12:13:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:44 Set channel filter=0.000000e+000 result=40 12:13:44 Config A/D Result=40 12:13:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:44 Get A/D filter: -9.255963e+061 result=40 12:13:44 Get A/D value=-858993460 result=40 12:13:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:44 Parameters OK 12:13:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:44 Set A/D data flow result=40 12:13:44 Set A/D channel type result=40 [UTC 2019-3-4 12:13:44] 12:13:44 Set A/D encoding result=40 12:13:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:44 Set channel filter=0.000000e+000 result=40 12:13:44 Config A/D Result=40 12:13:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:44 Get A/D filter: -9.255963e+061 result=40 12:13:44 Get A/D value=-858993460 result=40 12:13:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:44 Aux= 12:13:44 Message to Camera, serial 105560 queued 12:14:21 Received message from Master: op=PointingHead serial=105573 12:14:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:14:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:14:21 Point started: ret=0 12:14:21 point_skyscan result=0 12:14:22 Check angles 12:14:22 SkyScan query 12:14:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:14:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:14:23 Message to Master queued w/err=0: serial=105573 error=0 12:14:28 Received message from Master: op=Filter serial=105574 12:14:28 Color wheel filter change from 0 to 0 12:14:28 FLIGetFilterPos err=0 currentPosition=0 12:14:28 FLIGetStepsRemaining err=0 RemainingSteps=0 12:14:28 Filter is already there-color wheel unchanged 12:14:28 Received message from Master: op=Shutter serial=105575 12:14:28 Shutter LASER close 12:14:28 Received message from Camera: op=State serial=105577 12:14:28 GetSingleValue result=40 Value=cccccccc 12:14:28 SkyScan query 12:14:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:14:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:29 Parameters OK 12:14:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:29 Set A/D data flow result=40 12:14:29 Set A/D channel type result=40 12:14:29 Set A/D encoding result=40 12:14:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:29 Set channel filter=0.000000e+000 result=40 12:14:29 Config A/D Result=40 12:14:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:29 Get A/D filter: -9.255963e+061 result=40 12:14:29 Get A/D value=-858993460 result=40 12:14:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:29 Parameters OK 12:14:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:29 Set A/D data flow result=40 12:14:29 Set A/D channel type result=40 12:14:29 Set A/D encoding result=40 12:14:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:29 Set channel filter=0.000000e+000 result=40 12:14:29 Config A/D Result=40 12:14:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:29 Get A/D filter: -9.255963e+061 result=40 12:14:29 Get A/D value=-858993460 result=40 12:14:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:14:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:14:29 Aux= 12:14:29 Message to Camera, serial 105577 queued 12:15:05 Received message from Master: op=PointingHead serial=105590 12:15:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:15:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:15:06 Point started: ret=0 12:15:06 point_skyscan result=0 12:15:06 Check angles 12:15:06 SkyScan query 12:15:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:15:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:15:07 Message to Master queued w/err=0: serial=105590 error=0 12:15:12 Received message from Master: op=Filter serial=105591 12:15:12 Color wheel filter change from 0 to 0 12:15:12 FLIGetFilterPos err=0 currentPosition=0 12:15:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:15:12 Filter is already there-color wheel unchanged 12:15:12 Received message from Master: op=Shutter serial=105592 12:15:12 Shutter LASER close 12:15:12 Received message from Camera: op=State serial=105594 12:15:12 GetSingleValue result=40 Value=cccccccc 12:15:12 SkyScan query 12:15:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:15:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:13 Parameters OK 12:15:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:13 Set A/D data flow result=40 12:15:13 Set A/D channel type result=40 12:15:13 Set A/D encoding result=40 12:15:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:13 Set channel filter=0.000000e+000 result=40 12:15:13 Config A/D Result=40 12:15:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:13 Get A/D filter: -9.255963e+061 result=40 12:15:13 Get A/D value=-858993460 result=40 12:15:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:13 Parameters OK 12:15:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:13 Set A/D data flow result=40 12:15:13 Set A/D channel type result=40 12:15:13 Set A/D encoding result=40 12:15:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:13 Set channel filter=0.000000e+000 result=40 12:15:13 Config A/D Result=40 12:15:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:13 Get A/D filter: -9.255963e+061 result=40 12:15:13 Get A/D value=-858993460 result=40 12:15:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:15:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:15:13 Aux= 12:15:13 Message to Camera, serial 105594 queued 12:15:50 Received message from Master: op=PointingHead serial=105607 12:15:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:15:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:15:50 Point started: ret=0 12:15:50 point_skyscan result=0 12:15:51 Check angles 12:15:51 SkyScan query 12:15:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:15:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:15:51 Message to Master queued w/err=0: serial=105607 error=0 12:15:56 Received message from Master: op=Filter serial=105608 12:15:56 Color wheel filter change from 0 to 0 12:15:56 FLIGetFilterPos err=0 currentPosition=0 12:15:56 FLIGetStepsRemaining err=0 RemainingSteps=0 12:15:56 Filter is already there-color wheel unchanged 12:15:56 Received message from Master: op=Shutter serial=105609 12:15:56 Shutter LASER close 12:15:57 Received message from Camera: op=State serial=105611 12:15:57 GetSingleValue result=40 Value=cccccccc 12:15:57 SkyScan query 12:15:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:15:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:57 Parameters OK 12:15:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:57 Set A/D data flow result=40 12:15:57 Set A/D channel type result=40 12:15:57 Set A/D encoding result=40 12:15:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:57 Set channel filter=0.000000e+000 result=40 12:15:57 Config A/D Result=40 12:15:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:57 Get A/D filter: -9.255963e+061 result=40 12:15:57 Get A/D value=-858993460 result=40 12:15:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:57 Parameters OK 12:15:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:57 Set A/D data flow result=40 12:15:57 Set A/D channel type result=40 12:15:57 Set A/D encoding result=40 12:15:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:57 Set channel filter=0.000000e+000 result=40 12:15:57 Config A/D Result=40 12:15:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:57 Get A/D filter: -9.255963e+061 result=40 12:15:57 Get A/D value=-858993460 result=40 12:15:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:15:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:15:57 Aux= 12:15:57 Message to Camera, serial 105611 queued 12:16:34 Received message from Master: op=PointingHead serial=105624 12:16:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:16:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:16:34 Point started: ret=0 12:16:34 point_skyscan result=0 12:16:35 Check angles 12:16:35 SkyScan query 12:16:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.64<-13576 Statuses=0008 0009 12:16:36 Msec=0 True Az=112.995 Ze=-23.64 Az status=0008 Ze status=0009 12:16:36 Check angles 12:16:36 SkyScan query 12:16:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 12:16:36 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 12:16:37 Check angles 12:16:37 SkyScan query 12:16:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 12:16:37 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 12:16:37 Check angles 12:16:37 SkyScan query 12:16:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.505<-17767 Statuses=0008 0009 12:16:38 Msec=2250 True Az=112.995 Ze=-86.505 Az status=0008 Ze status=0009 12:16:38 Check angles 12:16:38 SkyScan query 12:16:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.955<-19197 Statuses=0008 0009 12:16:39 Msec=3000 True Az=112.995 Ze=-107.955 Az status=0008 Ze status=0009 12:16:39 Check angles 12:16:39 SkyScan query 12:16:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.88<-20592 Statuses=0008 0009 12:16:39 Msec=3750 True Az=112.995 Ze=-128.88 Az status=0008 Ze status=0009 12:16:40 Check angles 12:16:40 SkyScan query 12:16:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.865<-21991 Statuses=0008 0009 12:16:40 Msec=4500 True Az=112.995 Ze=-149.865 Az status=0008 Ze status=0009 12:16:40 Check angles 12:16:40 SkyScan query 12:16:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.06<-23404 Statuses=0008 0009 12:16:41 Msec=5250 True Az=112.995 Ze=-171.06 Az status=0008 Ze status=0009 12:16:41 Check angles 12:16:41 SkyScan query 12:16:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:16:42 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:16:42 Message to Master queued w/err=0: serial=105624 error=0 12:16:47 Received message from Master: op=Filter serial=105625 12:16:47 Color wheel filter change from 0 to 0 12:16:47 FLIGetFilterPos err=0 currentPosition=0 12:16:47 FLIGetStepsRemaining err=0 RemainingSteps=0 12:16:47 Filter is already there-color wheel unchanged 12:16:47 Received message from Master: op=Shutter serial=105626 12:16:47 Shutter LASER open 12:16:47 Received message from Camera: op=State serial=105628 12:16:47 GetSingleValue result=40 Value=cccccccc 12:16:47 SkyScan query 12:16:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:16:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:48 Parameters OK 12:16:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:48 Set A/D data flow result=40 12:16:48 Set A/D channel type result=40 12:16:48 Set A/D encoding result=40 12:16:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:48 Set channel filter=0.000000e+000 result=40 12:16:48 Config A/D Result=40 12:16:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:48 Get A/D filter: -9.255963e+061 result=40 12:16:48 Get A/D value=-858993460 result=40 12:16:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:48 Parameters OK 12:16:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:48 Set A/D data flow result=40 12:16:48 Set A/D channel type result=40 12:16:48 Set A/D encoding result=40 12:16:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:48 Set channel filter=0.000000e+000 result=40 12:16:48 Config A/D Result=40 12:16:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:48 Get A/D filter: -9.255963e+061 result=40 12:16:48 Get A/D value=-858993460 result=40 12:16:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:16:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:16:48 Aux= 12:16:48 Message to Camera, serial 105628 queued 12:16:56 Received message from Master: op=Shutter serial=105638 12:16:56 Shutter LASER close 12:16:57 Received message from Master: op=PointingHead serial=105642 12:16:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:16:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:16:57 Point started: ret=0 12:16:57 point_skyscan result=0 12:16:58 Check angles 12:16:58 SkyScan query 12:16:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.31<-21554 Statuses=0008 0009 12:16:58 Msec=0 True Az=112.995 Ze=-143.31 Az status=0008 Ze status=0009 12:16:58 Check angles 12:16:58 SkyScan query 12:16:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.875<-20125 Statuses=0008 0009 12:16:59 Msec=750 True Az=112.995 Ze=-121.875 Az status=0008 Ze status=0009 12:16:59 Check angles 12:16:59 SkyScan query 12:17:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 12:17:00 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 12:17:00 Check angles 12:17:00 SkyScan query 12:17:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 12:17:01 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 12:17:01 Check angles 12:17:01 SkyScan query 12:17:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.04<-15936 Statuses=0008 0009 12:17:01 Msec=3000 True Az=112.995 Ze=-59.04 Az status=0008 Ze status=0009 12:17:01 Check angles 12:17:01 SkyScan query 12:17:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 12:17:02 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 12:17:02 Check angles 12:17:02 SkyScan query 12:17:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.085<-13139 Statuses=0008 0009 12:17:03 Msec=4500 True Az=112.995 Ze=-17.085 Az status=0008 Ze status=0009 12:17:03 Check angles 12:17:03 SkyScan query 12:17:04 SkyScan query done: ret=0 az=112.995<-7533 ze=3.87<-11742 Statuses=0008 0009 12:17:04 Msec=5250 True Az=112.995 Ze=3.87 Az status=0008 Ze status=0009 12:17:04 Check angles 12:17:04 SkyScan query 12:17:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:17:04 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:17:04 Message to Master queued w/err=0: serial=105642 error=0 12:17:09 Received message from Master: op=Filter serial=105643 12:17:09 Color wheel filter change from 0 to 0 12:17:09 FLIGetFilterPos err=0 currentPosition=0 12:17:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:17:09 Filter is already there-color wheel unchanged 12:17:09 Received message from Master: op=Shutter serial=105644 12:17:09 Shutter LASER close 12:17:10 Received message from Camera: op=State serial=105646 12:17:10 GetSingleValue result=40 Value=cccccccc 12:17:10 SkyScan query 12:17:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:17:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:10 Parameters OK 12:17:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:10 Set A/D data flow result=40 12:17:10 Set A/D channel type result=40 12:17:10 Set A/D encoding result=40 12:17:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:10 Set channel filter=0.000000e+000 result=40 12:17:10 Config A/D Result=40 12:17:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:10 Get A/D filter: -9.255963e+061 result=40 12:17:10 Get A/D value=-858993460 result=40 12:17:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:10 Parameters OK 12:17:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:10 Set A/D data flow result=40 12:17:10 Set A/D channel type result=40 12:17:10 Set A/D encoding result=40 12:17:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:10 Set channel filter=0.000000e+000 result=40 12:17:10 Config A/D Result=40 12:17:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:10 Get A/D filter: -9.255963e+061 result=40 12:17:10 Get A/D value=-858993460 result=40 12:17:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:17:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:17:10 Aux= 12:17:10 Message to Camera, serial 105646 queued 12:17:46 Received message from Master: op=PointingHead serial=105658 12:17:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:17:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:17:46 Point started: ret=0 12:17:46 point_skyscan result=0 12:17:47 Check angles 12:17:47 SkyScan query 12:17:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:17:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:17:48 Message to Master queued w/err=0: serial=105658 error=0 12:17:53 Received message from Master: op=Filter serial=105659 12:17:53 Color wheel filter change from 0 to 0 12:17:53 FLIGetFilterPos err=0 currentPosition=0 12:17:53 FLIGetStepsRemaining err=0 RemainingSteps=0 12:17:53 Filter is already there-color wheel unchanged 12:17:53 Received message from Master: op=Shutter serial=105660 12:17:53 Shutter LASER close 12:17:53 Received message from Camera: op=State serial=105662 12:17:53 GetSingleValue result=40 Value=cccccccc 12:17:53 SkyScan query 12:17:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:17:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:54 Parameters OK 12:17:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:54 Set A/D data flow result=40 12:17:54 Set A/D channel type result=40 12:17:54 Set A/D encoding result=40 12:17:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:54 Set channel filter=0.000000e+000 result=40 12:17:54 Config A/D Result=40 12:17:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:54 Get A/D filter: -9.255963e+061 result=40 12:17:54 Get A/D value=-858993460 result=40 12:17:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:54 Parameters OK 12:17:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:54 Set A/D data flow result=40 12:17:54 Set A/D channel type result=40 12:17:54 Set A/D encoding result=40 12:17:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:54 Set channel filter=0.000000e+000 result=40 12:17:54 Config A/D Result=40 12:17:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:54 Get A/D filter: -9.255963e+061 result=40 12:17:54 Get A/D value=-858993460 result=40 12:17:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:17:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:17:54 Aux= 12:17:54 Message to Camera, serial 105662 queued 12:18:31 Received message from Master: op=PointingHead serial=105675 12:18:31 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:18:31 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:18:31 Point started: ret=0 12:18:31 point_skyscan result=0 12:18:32 Check angles 12:18:32 SkyScan query 12:18:32 SkyScan query done: ret=0 az=135.75<-9050 ze=-6.51<-12434 Statuses=0009 0008 12:18:32 Msec=0 True Az=135.75 Ze=-6.51 Az status=0009 Ze status=0008 12:18:32 Check angles 12:18:32 SkyScan query 12:18:33 SkyScan query done: ret=0 az=153.285<-10219 ze=-6.51<-12434 Statuses=0009 0008 12:18:33 Msec=750 True Az=153.285 Ze=-6.51 Az status=0009 Ze status=0008 12:18:33 Check angles 12:18:33 SkyScan query 12:18:34 SkyScan query done: ret=0 az=170.745<-11383 ze=-6.495<-12433 Statuses=0009 0008 12:18:34 Msec=1500 True Az=170.745 Ze=-6.495 Az status=0009 Ze status=0008 12:18:34 Check angles 12:18:34 SkyScan query 12:18:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:18:34 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:18:34 Message to Master queued w/err=0: serial=105675 error=0 12:18:39 Received message from Master: op=Filter serial=105676 12:18:39 Color wheel filter change from 0 to 0 12:18:39 FLIGetFilterPos err=0 currentPosition=0 12:18:39 FLIGetStepsRemaining err=0 RemainingSteps=0 12:18:39 Filter is already there-color wheel unchanged 12:18:40 Received message from Master: op=Shutter serial=105677 12:18:40 Shutter LASER close 12:18:40 Received message from Camera: op=State serial=105679 12:18:40 GetSingleValue result=40 Value=cccccccc 12:18:40 SkyScan query 12:18:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:18:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:40 Parameters OK 12:18:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:40 Set A/D data flow result=40 12:18:40 Set A/D channel type result=40 12:18:40 Set A/D encoding result=40 12:18:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:40 Set channel filter=0.000000e+000 result=40 12:18:40 Config A/D Result=40 12:18:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:40 Get A/D filter: -9.255963e+061 result=40 12:18:40 Get A/D value=-858993460 result=40 12:18:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:40 Parameters OK 12:18:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:40 Set A/D data flow result=40 12:18:40 Set A/D channel type result=40 12:18:40 Set A/D encoding result=40 12:18:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:40 Set channel filter=0.000000e+000 result=40 12:18:40 Config A/D Result=40 12:18:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:40 Get A/D filter: -9.255963e+061 result=40 12:18:40 Get A/D value=-858993460 result=40 12:18:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:40 Aux= 12:18:40 Message to Camera, serial 105679 queued 12:19:17 Received message from Master: op=PointingHead serial=105692 12:19:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:19:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:19:17 Point started: ret=0 12:19:17 point_skyscan result=0 12:19:18 Check angles 12:19:18 SkyScan query 12:19:19 SkyScan query done: ret=0 az=152.805<-10187 ze=6.51<-11566 Statuses=0009 0008 12:19:19 Msec=0 True Az=152.805 Ze=6.51 Az status=0009 Ze status=0008 12:19:19 Check angles 12:19:19 SkyScan query 12:19:19 SkyScan query done: ret=0 az=135.195<-9013 ze=6.495<-11567 Statuses=0009 0008 12:19:19 Msec=750 True Az=135.195 Ze=6.495 Az status=0009 Ze status=0008 12:19:20 Check angles 12:19:20 SkyScan query 12:19:20 SkyScan query done: ret=0 az=117.525<-7835 ze=6.495<-11567 Statuses=0009 0008 12:19:20 Msec=1500 True Az=117.525 Ze=6.495 Az status=0009 Ze status=0008 12:19:20 Check angles 12:19:20 SkyScan query 12:19:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:19:21 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:19:21 Message to Master queued w/err=0: serial=105692 error=0 12:19:26 Received message from Master: op=Filter serial=105693 12:19:26 Color wheel filter change from 0 to 0 12:19:26 FLIGetFilterPos err=0 currentPosition=0 12:19:26 FLIGetStepsRemaining err=0 RemainingSteps=0 12:19:26 Filter is already there-color wheel unchanged 12:19:26 Received message from Master: op=Shutter serial=105694 12:19:26 Shutter LASER close 12:19:26 Received message from Camera: op=State serial=105696 12:19:26 GetSingleValue result=40 Value=cccccccc 12:19:26 SkyScan query 12:19:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:19:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:27 Parameters OK 12:19:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:27 Set A/D data flow result=40 12:19:27 Set A/D channel type result=40 12:19:27 Set A/D encoding result=40 12:19:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:27 Set channel filter=0.000000e+000 result=40 12:19:27 Config A/D Result=40 12:19:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:27 Get A/D filter: -9.255963e+061 result=40 12:19:27 Get A/D value=-858993460 result=40 12:19:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:27 Parameters OK 12:19:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:27 Set A/D data flow result=40 12:19:27 Set A/D channel type result=40 12:19:27 Set A/D encoding result=40 12:19:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:27 Set channel filter=0.000000e+000 result=40 12:19:27 Config A/D Result=40 12:19:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:27 Get A/D filter: -9.255963e+061 result=40 12:19:27 Get A/D value=-858993460 result=40 12:19:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:19:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:19:27 Aux= 12:19:27 Message to Camera, serial 105696 queued 12:20:04 Received message from Master: op=PointingHead serial=105709 12:20:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:20:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:20:04 Point started: ret=0 12:20:04 point_skyscan result=0 12:20:05 Check angles 12:20:05 SkyScan query 12:20:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 12:20:05 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 12:20:05 Check angles 12:20:05 SkyScan query 12:20:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.25<-14950 Statuses=0008 0009 12:20:06 Msec=750 True Az=112.995 Ze=-44.25 Az status=0008 Ze status=0009 12:20:06 Check angles 12:20:06 SkyScan query 12:20:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.175<-16345 Statuses=0008 0009 12:20:07 Msec=1500 True Az=112.995 Ze=-65.175 Az status=0008 Ze status=0009 12:20:07 Check angles 12:20:07 SkyScan query 12:20:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.13<-17742 Statuses=0008 0009 12:20:08 Msec=2250 True Az=112.995 Ze=-86.13 Az status=0008 Ze status=0009 12:20:08 Check angles 12:20:08 SkyScan query 12:20:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.055<-19137 Statuses=0008 0009 12:20:08 Msec=3000 True Az=112.995 Ze=-107.055 Az status=0008 Ze status=0009 12:20:08 Check angles 12:20:08 SkyScan query 12:20:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.04<-20536 Statuses=0008 0009 12:20:09 Msec=3750 True Az=112.995 Ze=-128.04 Az status=0008 Ze status=0009 12:20:09 Check angles 12:20:09 SkyScan query 12:20:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.01<-21934 Statuses=0008 0009 12:20:10 Msec=4500 True Az=112.995 Ze=-149.01 Az status=0008 Ze status=0009 12:20:10 Check angles 12:20:10 SkyScan query 12:20:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.415<-23361 Statuses=0008 0009 12:20:11 Msec=5250 True Az=112.995 Ze=-170.415 Az status=0008 Ze status=0009 12:20:11 Check angles 12:20:11 SkyScan query 12:20:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:20:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:20:11 Message to Master queued w/err=0: serial=105709 error=0 12:20:16 Received message from Master: op=Filter serial=105710 12:20:16 Color wheel filter change from 0 to 0 12:20:16 FLIGetFilterPos err=0 currentPosition=0 12:20:16 FLIGetStepsRemaining err=0 RemainingSteps=0 12:20:16 Filter is already there-color wheel unchanged 12:20:16 Received message from Master: op=Shutter serial=105711 12:20:16 Shutter LASER open 12:20:17 Received message from Camera: op=State serial=105713 12:20:17 GetSingleValue result=40 Value=cccccccc 12:20:17 SkyScan query 12:20:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:20:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:17 Parameters OK 12:20:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:17 Set A/D data flow result=40 12:20:17 Set A/D channel type result=40 12:20:17 Set A/D encoding result=40 12:20:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:17 Set channel filter=0.000000e+000 result=40 12:20:17 Config A/D Result=40 12:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:17 Get A/D filter: -9.255963e+061 result=40 12:20:17 Get A/D value=-858993460 result=40 12:20:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:17 Parameters OK 12:20:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:17 Set A/D data flow result=40 12:20:17 Set A/D channel type result=40 12:20:17 Set A/D encoding result=40 12:20:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:17 Set channel filter=0.000000e+000 result=40 12:20:17 Config A/D Result=40 12:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:17 Get A/D filter: -9.255963e+061 result=40 12:20:17 Get A/D value=-858993460 result=40 12:20:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:20:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:20:17 Aux= 12:20:17 Message to Camera, serial 105713 queued 12:20:26 Received message from Master: op=Shutter serial=105723 12:20:26 Shutter LASER close 12:20:26 Received message from Master: op=PointingHead serial=105727 12:20:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:20:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:20:26 Point started: ret=0 12:20:26 point_skyscan result=0 12:20:27 Check angles 12:20:27 SkyScan query 12:20:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.1<-21540 Statuses=0008 0009 12:20:28 Msec=0 True Az=112.995 Ze=-143.1 Az status=0008 Ze status=0009 12:20:28 Check angles 12:20:28 SkyScan query 12:20:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.115<-20141 Statuses=0008 0009 12:20:29 Msec=750 True Az=112.995 Ze=-122.115 Az status=0008 Ze status=0009 12:20:29 Check angles 12:20:29 SkyScan query 12:20:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.19<-18746 Statuses=0008 0009 12:20:29 Msec=1500 True Az=112.995 Ze=-101.19 Az status=0008 Ze status=0009 12:20:29 Check angles 12:20:29 SkyScan query 12:20:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.235<-17349 Statuses=0008 0009 12:20:30 Msec=2250 True Az=112.995 Ze=-80.235 Az status=0008 Ze status=0009 12:20:30 Check angles 12:20:30 SkyScan query 12:20:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.295<-15953 Statuses=0008 0009 12:20:31 Msec=3000 True Az=112.995 Ze=-59.295 Az status=0008 Ze status=0009 12:20:31 Check angles 12:20:31 SkyScan query 12:20:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.28<-14552 Statuses=0008 0009 12:20:32 Msec=3750 True Az=112.995 Ze=-38.28 Az status=0008 Ze status=0009 12:20:32 Check angles 12:20:32 SkyScan query 12:20:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.34<-13156 Statuses=0008 0009 12:20:32 Msec=4500 True Az=112.995 Ze=-17.34 Az status=0008 Ze status=0009 12:20:32 Check angles 12:20:32 SkyScan query 12:20:33 SkyScan query done: ret=0 az=112.995<-7533 ze=3.645<-11757 Statuses=0008 0009 12:20:33 Msec=5250 True Az=112.995 Ze=3.645 Az status=0008 Ze status=0009 12:20:33 Check angles 12:20:33 SkyScan query 12:20:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:20:34 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:20:34 Message to Master queued w/err=0: serial=105727 error=0 12:20:39 Received message from Master: op=Filter serial=105728 12:20:39 Color wheel filter change from 0 to 0 12:20:39 FLIGetFilterPos err=0 currentPosition=0 12:20:39 FLIGetStepsRemaining err=0 RemainingSteps=0 12:20:39 Filter is already there-color wheel unchanged 12:20:39 Received message from Master: op=Shutter serial=105729 12:20:39 Shutter LASER close 12:20:39 Received message from Camera: op=State serial=105731 12:20:39 GetSingleValue result=40 Value=cccccccc 12:20:39 SkyScan query 12:20:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:20:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:40 Parameters OK 12:20:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:40 Set A/D data flow result=40 12:20:40 Set A/D channel type result=40 12:20:40 Set A/D encoding result=40 12:20:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:40 Set channel filter=0.000000e+000 result=40 12:20:40 Config A/D Result=40 12:20:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:40 Get A/D filter: -9.255963e+061 result=40 12:20:40 Get A/D value=-858993460 result=40 12:20:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:40 Parameters OK 12:20:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:40 Set A/D data flow result=40 12:20:40 Set A/D channel type result=40 12:20:40 Set A/D encoding result=40 12:20:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:40 Set channel filter=0.000000e+000 result=40 12:20:40 Config A/D Result=40 12:20:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:40 Get A/D filter: -9.255963e+061 result=40 12:20:40 Get A/D value=-858993460 result=40 12:20:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:20:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:20:40 Aux= 12:20:40 Message to Camera, serial 105731 queued 12:21:17 Received message from Master: op=PointingHead serial=105744 12:21:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:21:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:21:17 Point started: ret=0 12:21:17 point_skyscan result=0 12:21:18 Check angles 12:21:18 SkyScan query 12:21:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:21:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:21:18 Message to Master queued w/err=0: serial=105744 error=0 12:21:23 Received message from Master: op=Filter serial=105745 12:21:23 Color wheel filter change from 0 to 0 12:21:23 FLIGetFilterPos err=0 currentPosition=0 12:21:23 FLIGetStepsRemaining err=0 RemainingSteps=0 12:21:23 Filter is already there-color wheel unchanged 12:21:23 Received message from Master: op=Shutter serial=105746 12:21:23 Shutter LASER close 12:21:23 Received message from Camera: op=State serial=105748 12:21:23 GetSingleValue result=40 Value=cccccccc 12:21:23 SkyScan query 12:21:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:21:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:24 Parameters OK 12:21:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:24 Set A/D data flow result=40 12:21:24 Set A/D channel type result=40 12:21:24 Set A/D encoding result=40 12:21:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:24 Set channel filter=0.000000e+000 result=40 12:21:24 Config A/D Result=40 12:21:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:24 Get A/D filter: -9.255963e+061 result=40 12:21:24 Get A/D value=-858993460 result=40 12:21:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:24 Parameters OK 12:21:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:24 Set A/D data flow result=40 12:21:24 Set A/D channel type result=40 12:21:24 Set A/D encoding result=40 12:21:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:24 Set channel filter=0.000000e+000 result=40 12:21:24 Config A/D Result=40 12:21:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:24 Get A/D filter: -9.255963e+061 result=40 12:21:24 Get A/D value=-858993460 result=40 12:21:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:21:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:21:24 Aux= 12:21:24 Message to Camera, serial 105748 queued 12:22:01 Received message from Master: op=PointingHead serial=105761 12:22:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:22:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:22:01 Point started: ret=0 12:22:01 point_skyscan result=0 12:22:02 Check angles 12:22:02 SkyScan query 12:22:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:22:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:22:02 Message to Master queued w/err=0: serial=105761 error=0 12:22:07 Received message from Master: op=Filter serial=105762 12:22:07 Color wheel filter change from 0 to 0 12:22:07 FLIGetFilterPos err=0 currentPosition=0 12:22:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:22:07 Filter is already there-color wheel unchanged 12:22:08 Received message from Master: op=Shutter serial=105763 12:22:08 Shutter LASER close 12:22:08 Received message from Camera: op=State serial=105765 12:22:08 GetSingleValue result=40 Value=cccccccc 12:22:08 SkyScan query 12:22:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:22:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:08 Parameters OK 12:22:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:08 Set A/D data flow result=40 12:22:08 Set A/D channel type result=40 12:22:08 Set A/D encoding result=40 12:22:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:08 Set channel filter=0.000000e+000 result=40 12:22:08 Config A/D Result=40 12:22:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:08 Get A/D filter: -9.255963e+061 result=40 12:22:08 Get A/D value=-858993460 result=40 12:22:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:08 Parameters OK 12:22:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:08 Set A/D data flow result=40 12:22:08 Set A/D channel type result=40 12:22:08 Set A/D encoding result=40 12:22:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:08 Set channel filter=0.000000e+000 result=40 12:22:08 Config A/D Result=40 12:22:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:08 Get A/D filter: -9.255963e+061 result=40 12:22:08 Get A/D value=-858993460 result=40 12:22:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:22:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:22:08 Aux= 12:22:08 Message to Camera, serial 105765 queued 12:22:45 Received message from Master: op=PointingHead serial=105778 12:22:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:22:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:22:45 Point started: ret=0 12:22:45 point_skyscan result=0 12:22:46 Check angles 12:22:46 SkyScan query 12:22:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:22:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:22:47 Message to Master queued w/err=0: serial=105778 error=0 12:22:52 Received message from Master: op=Filter serial=105779 12:22:52 Color wheel filter change from 0 to 0 12:22:52 FLIGetFilterPos err=0 currentPosition=0 12:22:52 FLIGetStepsRemaining err=0 RemainingSteps=0 12:22:52 Filter is already there-color wheel unchanged 12:22:52 Received message from Master: op=Shutter serial=105780 12:22:52 Shutter LASER close 12:22:52 Received message from Camera: op=State serial=105782 12:22:52 GetSingleValue result=40 Value=cccccccc 12:22:52 SkyScan query 12:22:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:22:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:53 Parameters OK 12:22:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:53 Set A/D data flow result=40 12:22:53 Set A/D channel type result=40 12:22:53 Set A/D encoding result=40 12:22:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:53 Set channel filter=0.000000e+000 result=40 12:22:53 Config A/D Result=40 12:22:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:53 Get A/D filter: -9.255963e+061 result=40 12:22:53 Get A/D value=-858993460 result=40 12:22:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:53 Parameters OK 12:22:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:53 Set A/D data flow result=40 12:22:53 Set A/D channel type result=40 12:22:53 Set A/D encoding result=40 12:22:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:53 Set channel filter=0.000000e+000 result=40 12:22:53 Config A/D Result=40 12:22:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:53 Get A/D filter: -9.255963e+061 result=40 12:22:53 Get A/D value=-858993460 result=40 12:22:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:22:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:22:53 Aux= 12:22:53 Message to Camera, serial 105782 queued 12:23:29 Received message from Master: op=PointingHead serial=105795 12:23:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:23:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:23:30 Point started: ret=0 12:23:30 point_skyscan result=0 12:23:31 Check angles 12:23:31 SkyScan query 12:23:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.475<-13565 Statuses=0008 0009 12:23:31 Msec=0 True Az=112.995 Ze=-23.475 Az status=0008 Ze status=0009 12:23:31 Check angles 12:23:31 SkyScan query 12:23:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.46<-14964 Statuses=0008 0009 12:23:32 Msec=750 True Az=112.995 Ze=-44.46 Az status=0008 Ze status=0009 12:23:32 Check angles 12:23:32 SkyScan query 12:23:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.805<-16387 Statuses=0008 0009 12:23:33 Msec=1500 True Az=112.995 Ze=-65.805 Az status=0008 Ze status=0009 12:23:33 Check angles 12:23:33 SkyScan query 12:23:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.775<-17785 Statuses=0008 0009 12:23:33 Msec=2250 True Az=112.995 Ze=-86.775 Az status=0008 Ze status=0009 12:23:34 Check angles 12:23:34 SkyScan query 12:23:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.745<-19183 Statuses=0008 0009 12:23:34 Msec=3000 True Az=112.995 Ze=-107.745 Az status=0008 Ze status=0009 12:23:34 Check angles 12:23:34 SkyScan query 12:23:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.67<-20578 Statuses=0008 0009 12:23:35 Msec=3750 True Az=112.995 Ze=-128.67 Az status=0008 Ze status=0009 12:23:35 Check angles 12:23:35 SkyScan query 12:23:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.67<-21978 Statuses=0008 0009 12:23:36 Msec=4500 True Az=112.995 Ze=-149.67 Az status=0008 Ze status=0009 12:23:36 Check angles 12:23:36 SkyScan query 12:23:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.595<-23373 Statuses=0008 0009 12:23:36 Msec=5250 True Az=112.995 Ze=-170.595 Az status=0008 Ze status=0009 12:23:37 Check angles 12:23:37 SkyScan query 12:23:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:23:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:23:37 Message to Master queued w/err=0: serial=105795 error=0 12:23:42 Received message from Master: op=Filter serial=105796 12:23:42 Color wheel filter change from 0 to 0 12:23:42 FLIGetFilterPos err=0 currentPosition=0 12:23:42 FLIGetStepsRemaining err=0 RemainingSteps=0 12:23:42 Filter is already there-color wheel unchanged 12:23:42 Received message from Master: op=Shutter serial=105797 12:23:42 Shutter LASER open 12:23:43 Received message from Camera: op=State serial=105799 12:23:43 GetSingleValue result=40 Value=cccccccc 12:23:43 SkyScan query 12:23:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:23:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:43 Parameters OK 12:23:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:43 Set A/D data flow result=40 12:23:43 Set A/D channel type result=40 12:23:43 Set A/D encoding result=40 12:23:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:43 Set channel filter=0.000000e+000 result=40 12:23:43 Config A/D Result=40 12:23:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:43 Get A/D filter: -9.255963e+061 result=40 12:23:43 Get A/D value=-858993460 result=40 12:23:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:43 Parameters OK 12:23:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:43 Set A/D data flow result=40 12:23:43 Set A/D channel type result=40 12:23:43 Set A/D encoding result=40 12:23:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:43 Set channel filter=0.000000e+000 result=40 12:23:43 Config A/D Result=40 12:23:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:43 Get A/D filter: -9.255963e+061 result=40 12:23:43 Get A/D value=-858993460 result=40 12:23:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:23:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:23:43 Aux= 12:23:43 Message to Camera, serial 105799 queued [UTC 2019-3-4 12:23:50] 12:23:52 Received message from Master: op=Shutter serial=105809 12:23:52 Shutter LASER close 12:23:52 Received message from Master: op=PointingHead serial=105813 12:23:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:23:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:23:52 Point started: ret=0 12:23:52 point_skyscan result=0 12:23:53 Check angles 12:23:53 SkyScan query 12:23:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 12:23:54 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 12:23:54 Check angles 12:23:54 SkyScan query 12:23:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 12:23:55 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 12:23:55 Check angles 12:23:55 SkyScan query 12:23:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 12:23:55 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 12:23:55 Check angles 12:23:55 SkyScan query 12:23:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.935<-17329 Statuses=0008 0009 12:23:56 Msec=2250 True Az=112.995 Ze=-79.935 Az status=0008 Ze status=0009 12:23:56 Check angles 12:23:56 SkyScan query 12:23:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.995<-15933 Statuses=0008 0009 12:23:57 Msec=3000 True Az=112.995 Ze=-58.995 Az status=0008 Ze status=0009 12:23:57 Check angles 12:23:57 SkyScan query 12:23:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.98<-14532 Statuses=0008 0009 12:23:58 Msec=3750 True Az=112.995 Ze=-37.98 Az status=0008 Ze status=0009 12:23:58 Check angles 12:23:58 SkyScan query 12:23:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.04<-13136 Statuses=0008 0009 12:23:58 Msec=4500 True Az=112.995 Ze=-17.04 Az status=0008 Ze status=0009 12:23:58 Check angles 12:23:58 SkyScan query 12:23:59 SkyScan query done: ret=0 az=112.995<-7533 ze=3.915<-11739 Statuses=0008 0009 12:23:59 Msec=5250 True Az=112.995 Ze=3.915 Az status=0008 Ze status=0009 12:23:59 Check angles 12:23:59 SkyScan query 12:24:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:24:00 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:24:00 Message to Master queued w/err=0: serial=105813 error=0 12:24:05 Received message from Master: op=Filter serial=105814 12:24:05 Color wheel filter change from 0 to 0 12:24:05 FLIGetFilterPos err=0 currentPosition=0 12:24:05 FLIGetStepsRemaining err=0 RemainingSteps=0 12:24:05 Filter is already there-color wheel unchanged 12:24:05 Received message from Master: op=Shutter serial=105815 12:24:05 Shutter LASER close 12:24:05 Received message from Camera: op=State serial=105817 12:24:05 GetSingleValue result=40 Value=cccccccc 12:24:05 SkyScan query 12:24:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:24:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:06 Parameters OK 12:24:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:06 Set A/D data flow result=40 12:24:06 Set A/D channel type result=40 12:24:06 Set A/D encoding result=40 12:24:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:06 Set channel filter=0.000000e+000 result=40 12:24:06 Config A/D Result=40 12:24:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:06 Get A/D filter: -9.255963e+061 result=40 12:24:06 Get A/D value=-858993460 result=40 12:24:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:06 Parameters OK 12:24:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:06 Set A/D data flow result=40 12:24:06 Set A/D channel type result=40 12:24:06 Set A/D encoding result=40 12:24:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:06 Set channel filter=0.000000e+000 result=40 12:24:06 Config A/D Result=40 12:24:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:06 Get A/D filter: -9.255963e+061 result=40 12:24:06 Get A/D value=-858993460 result=40 12:24:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:06 Aux= 12:24:06 Message to Camera, serial 105817 queued 12:24:43 Received message from Master: op=PointingHead serial=105830 12:24:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:24:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:24:43 Point started: ret=0 12:24:43 point_skyscan result=0 12:24:44 Check angles 12:24:44 SkyScan query 12:24:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:24:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:24:44 Message to Master queued w/err=0: serial=105830 error=0 12:24:49 Received message from Master: op=Filter serial=105831 12:24:49 Color wheel filter change from 0 to 0 12:24:49 FLIGetFilterPos err=0 currentPosition=0 12:24:49 FLIGetStepsRemaining err=0 RemainingSteps=0 12:24:49 Filter is already there-color wheel unchanged 12:24:49 Received message from Master: op=Shutter serial=105832 12:24:49 Shutter LASER close 12:24:49 Received message from Camera: op=State serial=105834 12:24:49 GetSingleValue result=40 Value=cccccccc 12:24:49 SkyScan query 12:24:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:24:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:50 Parameters OK 12:24:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:50 Set A/D data flow result=40 12:24:50 Set A/D channel type result=40 12:24:50 Set A/D encoding result=40 12:24:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:50 Set channel filter=0.000000e+000 result=40 12:24:50 Config A/D Result=40 12:24:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:50 Get A/D filter: -9.255963e+061 result=40 12:24:50 Get A/D value=-858993460 result=40 12:24:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:50 Parameters OK 12:24:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:50 Set A/D data flow result=40 12:24:50 Set A/D channel type result=40 12:24:50 Set A/D encoding result=40 12:24:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:50 Set channel filter=0.000000e+000 result=40 12:24:50 Config A/D Result=40 12:24:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:50 Get A/D filter: -9.255963e+061 result=40 12:24:50 Get A/D value=-858993460 result=40 12:24:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:50 Aux= 12:24:50 Message to Camera, serial 105834 queued 12:25:27 Received message from Master: op=PointingHead serial=105847 12:25:27 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:25:27 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:25:27 Point started: ret=0 12:25:27 point_skyscan result=0 12:25:28 Check angles 12:25:28 SkyScan query 12:25:29 SkyScan query done: ret=0 az=136.35<-9090 ze=-6.51<-12434 Statuses=0009 0008 12:25:29 Msec=0 True Az=136.35 Ze=-6.51 Az status=0009 Ze status=0008 12:25:29 Check angles 12:25:29 SkyScan query 12:25:29 SkyScan query done: ret=0 az=154.14<-10276 ze=-6.495<-12433 Statuses=0009 0008 12:25:29 Msec=750 True Az=154.14 Ze=-6.495 Az status=0009 Ze status=0008 12:25:29 Check angles 12:25:29 SkyScan query 12:25:30 SkyScan query done: ret=0 az=171.585<-11439 ze=-6.495<-12433 Statuses=0009 0008 12:25:30 Msec=1500 True Az=171.585 Ze=-6.495 Az status=0009 Ze status=0008 12:25:30 Check angles 12:25:30 SkyScan query 12:25:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:25:31 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:25:31 Message to Master queued w/err=0: serial=105847 error=0 12:25:36 Received message from Master: op=Filter serial=105848 12:25:36 Color wheel filter change from 0 to 0 12:25:36 FLIGetFilterPos err=0 currentPosition=0 12:25:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:25:36 Filter is already there-color wheel unchanged 12:25:36 Received message from Master: op=Shutter serial=105849 12:25:36 Shutter LASER close 12:25:36 Received message from Camera: op=State serial=105851 12:25:36 GetSingleValue result=40 Value=cccccccc 12:25:36 SkyScan query 12:25:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:25:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:37 Parameters OK 12:25:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:37 Set A/D data flow result=40 12:25:37 Set A/D channel type result=40 12:25:37 Set A/D encoding result=40 12:25:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:37 Set channel filter=0.000000e+000 result=40 12:25:37 Config A/D Result=40 12:25:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:37 Get A/D filter: -9.255963e+061 result=40 12:25:37 Get A/D value=-858993460 result=40 12:25:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:37 Parameters OK 12:25:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:37 Set A/D data flow result=40 12:25:37 Set A/D channel type result=40 12:25:37 Set A/D encoding result=40 12:25:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:37 Set channel filter=0.000000e+000 result=40 12:25:37 Config A/D Result=40 12:25:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:37 Get A/D filter: -9.255963e+061 result=40 12:25:37 Get A/D value=-858993460 result=40 12:25:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:25:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:25:37 Aux= 12:25:37 Message to Camera, serial 105851 queued 12:26:13 Received message from Master: op=PointingHead serial=105864 12:26:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:26:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:26:14 Point started: ret=0 12:26:14 point_skyscan result=0 12:26:15 Check angles 12:26:15 SkyScan query 12:26:15 SkyScan query done: ret=0 az=153<-10200 ze=6.51<-11566 Statuses=0009 0008 12:26:15 Msec=0 True Az=153 Ze=6.51 Az status=0009 Ze status=0008 12:26:15 Check angles 12:26:15 SkyScan query 12:26:16 SkyScan query done: ret=0 az=135.195<-9013 ze=6.495<-11567 Statuses=0009 0008 12:26:16 Msec=750 True Az=135.195 Ze=6.495 Az status=0009 Ze status=0008 12:26:16 Check angles 12:26:16 SkyScan query 12:26:17 SkyScan query done: ret=0 az=117.375<-7825 ze=6.495<-11567 Statuses=0009 0008 12:26:17 Msec=1500 True Az=117.375 Ze=6.495 Az status=0009 Ze status=0008 12:26:17 Check angles 12:26:17 SkyScan query 12:26:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:26:17 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:26:17 Message to Master queued w/err=0: serial=105864 error=0 12:26:22 Received message from Master: op=Filter serial=105865 12:26:22 Color wheel filter change from 0 to 0 12:26:22 FLIGetFilterPos err=0 currentPosition=0 12:26:22 FLIGetStepsRemaining err=0 RemainingSteps=0 12:26:22 Filter is already there-color wheel unchanged 12:26:23 Received message from Master: op=Shutter serial=105866 12:26:23 Shutter LASER close 12:26:23 Received message from Camera: op=State serial=105868 12:26:23 GetSingleValue result=40 Value=cccccccc 12:26:23 SkyScan query 12:26:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:26:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:23 Parameters OK 12:26:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:23 Set A/D data flow result=40 12:26:23 Set A/D channel type result=40 12:26:23 Set A/D encoding result=40 12:26:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:23 Set channel filter=0.000000e+000 result=40 12:26:23 Config A/D Result=40 12:26:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:23 Get A/D filter: -9.255963e+061 result=40 12:26:23 Get A/D value=-858993460 result=40 12:26:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:23 Parameters OK 12:26:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:23 Set A/D data flow result=40 12:26:23 Set A/D channel type result=40 12:26:23 Set A/D encoding result=40 12:26:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:23 Set channel filter=0.000000e+000 result=40 12:26:23 Config A/D Result=40 12:26:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:23 Get A/D filter: -9.255963e+061 result=40 12:26:23 Get A/D value=-858993460 result=40 12:26:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:26:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:26:23 Aux= 12:26:23 Message to Camera, serial 105868 queued 12:27:00 Received message from Master: op=PointingHead serial=105881 12:27:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:27:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:27:00 Point started: ret=0 12:27:00 point_skyscan result=0 12:27:01 Check angles 12:27:01 SkyScan query 12:27:02 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.355<-13557 Statuses=0008 0009 12:27:02 Msec=0 True Az=112.98 Ze=-23.355 Az status=0008 Ze status=0009 12:27:02 Check angles 12:27:02 SkyScan query 12:27:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.655<-14977 Statuses=0008 0009 12:27:02 Msec=750 True Az=112.995 Ze=-44.655 Az status=0008 Ze status=0009 12:27:03 Check angles 12:27:03 SkyScan query 12:27:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.61<-16374 Statuses=0008 0009 12:27:03 Msec=1500 True Az=112.995 Ze=-65.61 Az status=0008 Ze status=0009 12:27:03 Check angles 12:27:03 SkyScan query 12:27:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.58<-17772 Statuses=0008 0009 12:27:04 Msec=2250 True Az=112.995 Ze=-86.58 Az status=0008 Ze status=0009 12:27:04 Check angles 12:27:04 SkyScan query 12:27:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.565<-19171 Statuses=0008 0009 12:27:05 Msec=3000 True Az=112.995 Ze=-107.565 Az status=0008 Ze status=0009 12:27:05 Check angles 12:27:05 SkyScan query 12:27:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.505<-20567 Statuses=0008 0009 12:27:05 Msec=3750 True Az=112.995 Ze=-128.505 Az status=0008 Ze status=0009 12:27:06 Check angles 12:27:06 SkyScan query 12:27:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.505<-21967 Statuses=0008 0009 12:27:06 Msec=4500 True Az=112.995 Ze=-149.505 Az status=0008 Ze status=0009 12:27:06 Check angles 12:27:06 SkyScan query 12:27:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.43<-23362 Statuses=0008 0009 12:27:07 Msec=5250 True Az=112.995 Ze=-170.43 Az status=0008 Ze status=0009 12:27:07 Check angles 12:27:07 SkyScan query 12:27:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:27:08 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:27:08 Message to Master queued w/err=0: serial=105881 error=0 12:27:13 Received message from Master: op=Filter serial=105882 12:27:13 Color wheel filter change from 0 to 0 12:27:13 FLIGetFilterPos err=0 currentPosition=0 12:27:13 FLIGetStepsRemaining err=0 RemainingSteps=0 12:27:13 Filter is already there-color wheel unchanged 12:27:13 Received message from Master: op=Shutter serial=105883 12:27:13 Shutter LASER open 12:27:13 Received message from Camera: op=State serial=105885 12:27:13 GetSingleValue result=40 Value=cccccccc 12:27:13 SkyScan query 12:27:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:27:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:14 Parameters OK 12:27:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:14 Set A/D data flow result=40 12:27:14 Set A/D channel type result=40 12:27:14 Set A/D encoding result=40 12:27:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:14 Set channel filter=0.000000e+000 result=40 12:27:14 Config A/D Result=40 12:27:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:14 Get A/D filter: -9.255963e+061 result=40 12:27:14 Get A/D value=-858993460 result=40 12:27:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:14 Parameters OK 12:27:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:14 Set A/D data flow result=40 12:27:14 Set A/D channel type result=40 12:27:14 Set A/D encoding result=40 12:27:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:14 Set channel filter=0.000000e+000 result=40 12:27:14 Config A/D Result=40 12:27:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:14 Get A/D filter: -9.255963e+061 result=40 12:27:14 Get A/D value=-858993460 result=40 12:27:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:27:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:27:14 Aux= 12:27:14 Message to Camera, serial 105885 queued 12:27:22 Received message from Master: op=Shutter serial=105895 12:27:22 Shutter LASER close 12:27:23 Received message from Master: op=PointingHead serial=105899 12:27:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:27:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:27:23 Point started: ret=0 12:27:23 point_skyscan result=0 12:27:24 Check angles 12:27:24 SkyScan query 12:27:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.31<-21554 Statuses=0008 0009 12:27:24 Msec=0 True Az=112.995 Ze=-143.31 Az status=0008 Ze status=0009 12:27:24 Check angles 12:27:24 SkyScan query 12:27:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 12:27:25 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 12:27:25 Check angles 12:27:25 SkyScan query 12:27:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.445<-18763 Statuses=0008 0009 12:27:26 Msec=1500 True Az=112.995 Ze=-101.445 Az status=0008 Ze status=0009 12:27:26 Check angles 12:27:26 SkyScan query 12:27:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.49<-17366 Statuses=0008 0009 12:27:27 Msec=2250 True Az=112.995 Ze=-80.49 Az status=0008 Ze status=0009 12:27:27 Check angles 12:27:27 SkyScan query 12:27:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.535<-15969 Statuses=0008 0009 12:27:27 Msec=3000 True Az=112.995 Ze=-59.535 Az status=0008 Ze status=0009 12:27:27 Check angles 12:27:27 SkyScan query 12:27:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.055<-14537 Statuses=0008 0009 12:27:28 Msec=3750 True Az=112.995 Ze=-38.055 Az status=0008 Ze status=0009 12:27:28 Check angles 12:27:28 SkyScan query 12:27:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.1<-13140 Statuses=0008 0009 12:27:29 Msec=4500 True Az=112.995 Ze=-17.1 Az status=0008 Ze status=0009 12:27:29 Check angles 12:27:29 SkyScan query 12:27:30 SkyScan query done: ret=0 az=112.995<-7533 ze=3.84<-11744 Statuses=0008 0009 12:27:30 Msec=5250 True Az=112.995 Ze=3.84 Az status=0008 Ze status=0009 12:27:30 Check angles 12:27:30 SkyScan query 12:27:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:27:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:27:30 Message to Master queued w/err=0: serial=105899 error=0 12:27:35 Received message from Master: op=Filter serial=105900 12:27:35 Color wheel filter change from 0 to 0 12:27:35 FLIGetFilterPos err=0 currentPosition=0 12:27:35 FLIGetStepsRemaining err=0 RemainingSteps=0 12:27:35 Filter is already there-color wheel unchanged 12:27:35 Received message from Master: op=Shutter serial=105901 12:27:35 Shutter LASER close 12:27:36 Received message from Camera: op=State serial=105903 12:27:36 GetSingleValue result=40 Value=cccccccc 12:27:36 SkyScan query 12:27:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:27:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:36 Parameters OK 12:27:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:36 Set A/D data flow result=40 12:27:36 Set A/D channel type result=40 12:27:36 Set A/D encoding result=40 12:27:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:36 Set channel filter=0.000000e+000 result=40 12:27:36 Config A/D Result=40 12:27:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:36 Get A/D filter: -9.255963e+061 result=40 12:27:36 Get A/D value=-858993460 result=40 12:27:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:36 Parameters OK 12:27:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:36 Set A/D data flow result=40 12:27:36 Set A/D channel type result=40 12:27:36 Set A/D encoding result=40 12:27:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:36 Set channel filter=0.000000e+000 result=40 12:27:36 Config A/D Result=40 12:27:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:36 Get A/D filter: -9.255963e+061 result=40 12:27:36 Get A/D value=-858993460 result=40 12:27:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:27:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:27:36 Aux= 12:27:36 Message to Camera, serial 105903 queued 12:28:13 Received message from Master: op=PointingHead serial=105916 12:28:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:28:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:28:13 Point started: ret=0 12:28:13 point_skyscan result=0 12:28:14 Check angles 12:28:14 SkyScan query 12:28:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:28:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:28:15 Message to Master queued w/err=0: serial=105916 error=0 12:28:20 Received message from Master: op=Filter serial=105917 12:28:20 Color wheel filter change from 0 to 0 12:28:20 FLIGetFilterPos err=0 currentPosition=0 12:28:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:28:20 Filter is already there-color wheel unchanged 12:28:20 Received message from Master: op=Shutter serial=105918 12:28:20 Shutter LASER close 12:28:20 Received message from Camera: op=State serial=105920 12:28:20 GetSingleValue result=40 Value=cccccccc 12:28:20 SkyScan query 12:28:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:28:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:20 Parameters OK 12:28:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:20 Set A/D data flow result=40 12:28:20 Set A/D channel type result=40 12:28:20 Set A/D encoding result=40 12:28:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:20 Set channel filter=0.000000e+000 result=40 12:28:20 Config A/D Result=40 12:28:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:20 Get A/D filter: -9.255963e+061 result=40 12:28:20 Get A/D value=-858993460 result=40 12:28:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:20 Parameters OK 12:28:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:20 Set A/D data flow result=40 12:28:20 Set A/D channel type result=40 12:28:20 Set A/D encoding result=40 12:28:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:20 Set channel filter=0.000000e+000 result=40 12:28:20 Config A/D Result=40 12:28:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:20 Get A/D filter: -9.255963e+061 result=40 12:28:20 Get A/D value=-858993460 result=40 12:28:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:28:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:28:20 Aux= 12:28:20 Message to Camera, serial 105920 queued 12:28:57 Received message from Master: op=PointingHead serial=105933 12:28:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:28:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:28:58 Point started: ret=0 12:28:58 point_skyscan result=0 12:28:58 Check angles 12:28:58 SkyScan query 12:28:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:28:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:28:59 Message to Master queued w/err=0: serial=105933 error=0 12:29:04 Received message from Master: op=Filter serial=105934 12:29:04 Color wheel filter change from 0 to 0 12:29:04 FLIGetFilterPos err=0 currentPosition=0 12:29:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:29:04 Filter is already there-color wheel unchanged 12:29:04 Received message from Master: op=Shutter serial=105935 12:29:04 Shutter LASER close 12:29:04 Received message from Camera: op=State serial=105937 12:29:04 GetSingleValue result=40 Value=cccccccc 12:29:04 SkyScan query 12:29:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:29:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:05 Parameters OK 12:29:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:05 Set A/D data flow result=40 12:29:05 Set A/D channel type result=40 12:29:05 Set A/D encoding result=40 12:29:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:05 Set channel filter=0.000000e+000 result=40 12:29:05 Config A/D Result=40 12:29:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:05 Get A/D filter: -9.255963e+061 result=40 12:29:05 Get A/D value=-858993460 result=40 12:29:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:05 Parameters OK 12:29:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:05 Set A/D data flow result=40 12:29:05 Set A/D channel type result=40 12:29:05 Set A/D encoding result=40 12:29:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:05 Set channel filter=0.000000e+000 result=40 12:29:05 Config A/D Result=40 12:29:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:05 Get A/D filter: -9.255963e+061 result=40 12:29:05 Get A/D value=-858993460 result=40 12:29:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:29:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:29:05 Aux= 12:29:05 Message to Camera, serial 105937 queued 12:29:42 Received message from Master: op=PointingHead serial=105950 12:29:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:29:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:29:42 Point started: ret=0 12:29:42 point_skyscan result=0 12:29:43 Check angles 12:29:43 SkyScan query 12:29:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:29:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:29:43 Message to Master queued w/err=0: serial=105950 error=0 12:29:48 Received message from Master: op=Filter serial=105951 12:29:48 Color wheel filter change from 0 to 0 12:29:48 FLIGetFilterPos err=0 currentPosition=0 12:29:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:29:48 Filter is already there-color wheel unchanged 12:29:48 Received message from Master: op=Shutter serial=105952 12:29:48 Shutter LASER close 12:29:48 Received message from Camera: op=State serial=105954 12:29:48 GetSingleValue result=40 Value=cccccccc 12:29:48 SkyScan query 12:29:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:29:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:49 Parameters OK 12:29:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:49 Set A/D data flow result=40 12:29:49 Set A/D channel type result=40 12:29:49 Set A/D encoding result=40 12:29:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:49 Set channel filter=0.000000e+000 result=40 12:29:49 Config A/D Result=40 12:29:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:49 Get A/D filter: -9.255963e+061 result=40 12:29:49 Get A/D value=-858993460 result=40 12:29:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:49 Parameters OK 12:29:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:49 Set A/D data flow result=40 12:29:49 Set A/D channel type result=40 12:29:49 Set A/D encoding result=40 12:29:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:49 Set channel filter=0.000000e+000 result=40 12:29:49 Config A/D Result=40 12:29:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:49 Get A/D filter: -9.255963e+061 result=40 12:29:49 Get A/D value=-858993460 result=40 12:29:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:29:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:29:49 Aux= 12:29:49 Message to Camera, serial 105954 queued 12:30:26 Received message from Master: op=PointingHead serial=105967 12:30:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:30:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:30:26 Point started: ret=0 12:30:26 point_skyscan result=0 12:30:27 Check angles 12:30:27 SkyScan query 12:30:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.22<-13548 Statuses=0008 0009 12:30:28 Msec=0 True Az=112.995 Ze=-23.22 Az status=0008 Ze status=0009 12:30:28 Check angles 12:30:28 SkyScan query 12:30:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.205<-14947 Statuses=0008 0009 12:30:28 Msec=750 True Az=112.995 Ze=-44.205 Az status=0008 Ze status=0009 12:30:28 Check angles 12:30:28 SkyScan query 12:30:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 12:30:29 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 12:30:29 Check angles 12:30:29 SkyScan query 12:30:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 12:30:30 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 12:30:30 Check angles 12:30:30 SkyScan query 12:30:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.445<-19163 Statuses=0008 0009 12:30:31 Msec=3000 True Az=112.995 Ze=-107.445 Az status=0008 Ze status=0009 12:30:31 Check angles 12:30:31 SkyScan query 12:30:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.4<-20560 Statuses=0008 0009 12:30:31 Msec=3750 True Az=112.995 Ze=-128.4 Az status=0008 Ze status=0009 12:30:31 Check angles 12:30:31 SkyScan query 12:30:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.385<-21959 Statuses=0008 0009 12:30:32 Msec=4500 True Az=112.995 Ze=-149.385 Az status=0008 Ze status=0009 12:30:32 Check angles 12:30:32 SkyScan query 12:30:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.34<-23356 Statuses=0008 0009 12:30:33 Msec=5250 True Az=112.995 Ze=-170.34 Az status=0008 Ze status=0009 12:30:33 Check angles 12:30:33 SkyScan query 12:30:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:30:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:30:34 Message to Master queued w/err=0: serial=105967 error=0 12:30:39 Received message from Master: op=Filter serial=105968 12:30:39 Color wheel filter change from 0 to 0 12:30:39 FLIGetFilterPos err=0 currentPosition=0 12:30:39 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:39 Filter is already there-color wheel unchanged 12:30:39 Received message from Master: op=Shutter serial=105969 12:30:39 Shutter LASER open 12:30:39 Received message from Camera: op=State serial=105971 12:30:39 GetSingleValue result=40 Value=cccccccc 12:30:39 SkyScan query 12:30:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:30:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:39 Parameters OK 12:30:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:39 Set A/D data flow result=40 12:30:39 Set A/D channel type result=40 12:30:39 Set A/D encoding result=40 12:30:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:39 Set channel filter=0.000000e+000 result=40 12:30:39 Config A/D Result=40 12:30:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:39 Get A/D filter: -9.255963e+061 result=40 12:30:39 Get A/D value=-858993460 result=40 12:30:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:39 Parameters OK 12:30:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:39 Set A/D data flow result=40 12:30:39 Set A/D channel type result=40 12:30:39 Set A/D encoding result=40 12:30:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:39 Set channel filter=0.000000e+000 result=40 12:30:39 Config A/D Result=40 12:30:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:39 Get A/D filter: -9.255963e+061 result=40 12:30:39 Get A/D value=-858993460 result=40 12:30:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:39 Aux= 12:30:39 Message to Camera, serial 105971 queued 12:30:48 Received message from Master: op=Shutter serial=105981 12:30:48 Shutter LASER close 12:30:49 Received message from Master: op=PointingHead serial=105985 12:30:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:30:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:30:49 Point started: ret=0 12:30:49 point_skyscan result=0 12:30:50 Check angles 12:30:50 SkyScan query 12:30:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 12:30:50 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 12:30:50 Check angles 12:30:50 SkyScan query 12:30:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.31<-20154 Statuses=0008 0009 12:30:51 Msec=750 True Az=112.995 Ze=-122.31 Az status=0008 Ze status=0009 12:30:51 Check angles 12:30:51 SkyScan query 12:30:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.28<-18752 Statuses=0008 0009 12:30:52 Msec=1500 True Az=112.995 Ze=-101.28 Az status=0008 Ze status=0009 12:30:52 Check angles 12:30:52 SkyScan query 12:30:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.4<-17360 Statuses=0008 0009 12:30:52 Msec=2250 True Az=112.995 Ze=-80.4 Az status=0008 Ze status=0009 12:30:53 Check angles 12:30:53 SkyScan query 12:30:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.46<-15964 Statuses=0008 0009 12:30:53 Msec=3000 True Az=112.995 Ze=-59.46 Az status=0008 Ze status=0009 12:30:53 Check angles 12:30:53 SkyScan query 12:30:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.46<-14564 Statuses=0008 0009 12:30:54 Msec=3750 True Az=112.995 Ze=-38.46 Az status=0008 Ze status=0009 12:30:54 Check angles 12:30:54 SkyScan query 12:30:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.535<-13169 Statuses=0008 0009 12:30:55 Msec=4500 True Az=112.995 Ze=-17.535 Az status=0008 Ze status=0009 12:30:55 Check angles 12:30:55 SkyScan query 12:30:55 SkyScan query done: ret=0 az=112.995<-7533 ze=3.465<-11769 Statuses=0008 0009 12:30:55 Msec=5250 True Az=112.995 Ze=3.465 Az status=0008 Ze status=0009 12:30:56 Check angles 12:30:56 SkyScan query 12:30:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:30:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:30:56 Message to Master queued w/err=0: serial=105985 error=0 12:31:01 Received message from Master: op=Filter serial=105986 12:31:01 Color wheel filter change from 0 to 0 12:31:01 FLIGetFilterPos err=0 currentPosition=0 12:31:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:31:01 Filter is already there-color wheel unchanged 12:31:01 Received message from Master: op=Shutter serial=105987 12:31:01 Shutter LASER close 12:31:02 Received message from Camera: op=State serial=105989 12:31:02 GetSingleValue result=40 Value=cccccccc 12:31:02 SkyScan query 12:31:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:31:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:02 Parameters OK 12:31:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:02 Set A/D data flow result=40 12:31:02 Set A/D channel type result=40 12:31:02 Set A/D encoding result=40 12:31:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:02 Set channel filter=0.000000e+000 result=40 12:31:02 Config A/D Result=40 12:31:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:02 Get A/D filter: -9.255963e+061 result=40 12:31:02 Get A/D value=-858993460 result=40 12:31:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:02 Parameters OK 12:31:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:02 Set A/D data flow result=40 12:31:02 Set A/D channel type result=40 12:31:02 Set A/D encoding result=40 12:31:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:02 Set channel filter=0.000000e+000 result=40 12:31:02 Config A/D Result=40 12:31:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:02 Get A/D filter: -9.255963e+061 result=40 12:31:02 Get A/D value=-858993460 result=40 12:31:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:31:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:31:02 Aux= 12:31:02 Message to Camera, serial 105989 queued 12:31:39 Received message from Master: op=PointingHead serial=106002 12:31:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:31:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:31:39 Point started: ret=0 12:31:39 point_skyscan result=0 12:31:40 Check angles 12:31:40 SkyScan query 12:31:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:31:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:31:41 Message to Master queued w/err=0: serial=106002 error=0 12:31:46 Received message from Master: op=Filter serial=106003 12:31:46 Color wheel filter change from 0 to 0 12:31:46 FLIGetFilterPos err=0 currentPosition=0 12:31:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:31:46 Filter is already there-color wheel unchanged 12:31:46 Received message from Master: op=Shutter serial=106004 12:31:46 Shutter LASER close 12:31:46 Received message from Camera: op=State serial=106006 12:31:46 GetSingleValue result=40 Value=cccccccc 12:31:46 SkyScan query 12:31:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:31:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:46 Parameters OK 12:31:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:46 Set A/D data flow result=40 12:31:46 Set A/D channel type result=40 12:31:46 Set A/D encoding result=40 12:31:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:46 Set channel filter=0.000000e+000 result=40 12:31:46 Config A/D Result=40 12:31:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:46 Get A/D filter: -9.255963e+061 result=40 12:31:46 Get A/D value=-858993460 result=40 12:31:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:46 Parameters OK 12:31:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:46 Set A/D data flow result=40 12:31:46 Set A/D channel type result=40 12:31:46 Set A/D encoding result=40 12:31:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:46 Set channel filter=0.000000e+000 result=40 12:31:46 Config A/D Result=40 12:31:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:46 Get A/D filter: -9.255963e+061 result=40 12:31:46 Get A/D value=-858993460 result=40 12:31:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:31:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:31:46 Aux= 12:31:46 Message to Camera, serial 106006 queued 12:32:22 Received message from Master: op=PointingHead serial=106018 12:32:22 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:32:22 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:32:23 Point started: ret=0 12:32:23 point_skyscan result=0 12:32:23 Check angles 12:32:23 SkyScan query 12:32:24 SkyScan query done: ret=0 az=135.84<-9056 ze=-6.51<-12434 Statuses=0009 0008 12:32:24 Msec=0 True Az=135.84 Ze=-6.51 Az status=0009 Ze status=0008 12:32:24 Check angles 12:32:24 SkyScan query 12:32:25 SkyScan query done: ret=0 az=153.705<-10247 ze=-6.495<-12433 Statuses=0009 0008 12:32:25 Msec=750 True Az=153.705 Ze=-6.495 Az status=0009 Ze status=0008 12:32:25 Check angles 12:32:25 SkyScan query 12:32:26 SkyScan query done: ret=0 az=171.45<-11430 ze=-6.495<-12433 Statuses=0009 0008 12:32:26 Msec=1500 True Az=171.45 Ze=-6.495 Az status=0009 Ze status=0008 12:32:26 Check angles 12:32:26 SkyScan query 12:32:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:32:26 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:32:26 Message to Master queued w/err=0: serial=106018 error=0 12:32:31 Received message from Master: op=Filter serial=106019 12:32:31 Color wheel filter change from 0 to 0 12:32:31 FLIGetFilterPos err=0 currentPosition=0 12:32:31 FLIGetStepsRemaining err=0 RemainingSteps=0 12:32:31 Filter is already there-color wheel unchanged 12:32:31 Received message from Master: op=Shutter serial=106020 12:32:31 Shutter LASER close 12:32:31 Received message from Camera: op=State serial=106022 12:32:31 GetSingleValue result=40 Value=cccccccc 12:32:31 SkyScan query 12:32:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:32:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:32 Parameters OK 12:32:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:32 Set A/D data flow result=40 12:32:32 Set A/D channel type result=40 12:32:32 Set A/D encoding result=40 12:32:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:32 Set channel filter=0.000000e+000 result=40 12:32:32 Config A/D Result=40 12:32:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:32 Get A/D filter: -9.255963e+061 result=40 12:32:32 Get A/D value=-858993460 result=40 12:32:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:32 Parameters OK 12:32:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:32 Set A/D data flow result=40 12:32:32 Set A/D channel type result=40 12:32:32 Set A/D encoding result=40 12:32:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:32 Set channel filter=0.000000e+000 result=40 12:32:32 Config A/D Result=40 12:32:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:32 Get A/D filter: -9.255963e+061 result=40 12:32:32 Get A/D value=-858993460 result=40 12:32:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:32:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:32:32 Aux= 12:32:32 Message to Camera, serial 106022 queued 12:33:09 Received message from Master: op=PointingHead serial=106035 12:33:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:33:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:33:09 Point started: ret=0 12:33:09 point_skyscan result=0 12:33:10 Check angles 12:33:10 SkyScan query 12:33:11 SkyScan query done: ret=0 az=152.64<-10176 ze=6.51<-11566 Statuses=0009 0008 12:33:11 Msec=0 True Az=152.64 Ze=6.51 Az status=0009 Ze status=0008 12:33:11 Check angles 12:33:11 SkyScan query 12:33:11 SkyScan query done: ret=0 az=135.135<-9009 ze=6.495<-11567 Statuses=0009 0008 12:33:11 Msec=750 True Az=135.135 Ze=6.495 Az status=0009 Ze status=0008 12:33:12 Check angles 12:33:12 SkyScan query 12:33:12 SkyScan query done: ret=0 az=117.345<-7823 ze=6.495<-11567 Statuses=0009 0008 12:33:12 Msec=1500 True Az=117.345 Ze=6.495 Az status=0009 Ze status=0008 12:33:12 Check angles 12:33:12 SkyScan query 12:33:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:33:13 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:33:13 Message to Master queued w/err=0: serial=106035 error=0 12:33:18 Received message from Master: op=Filter serial=106036 12:33:18 Color wheel filter change from 0 to 0 12:33:18 FLIGetFilterPos err=0 currentPosition=0 12:33:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:33:18 Filter is already there-color wheel unchanged 12:33:18 Received message from Master: op=Shutter serial=106037 12:33:18 Shutter LASER close 12:33:18 Received message from Camera: op=State serial=106039 12:33:18 GetSingleValue result=40 Value=cccccccc 12:33:18 SkyScan query 12:33:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:33:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:19 Parameters OK 12:33:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:19 Set A/D data flow result=40 12:33:19 Set A/D channel type result=40 12:33:19 Set A/D encoding result=40 12:33:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:19 Set channel filter=0.000000e+000 result=40 12:33:19 Config A/D Result=40 12:33:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:19 Get A/D filter: -9.255963e+061 result=40 12:33:19 Get A/D value=-858993460 result=40 12:33:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:19 Parameters OK 12:33:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:19 Set A/D data flow result=40 12:33:19 Set A/D channel type result=40 12:33:19 Set A/D encoding result=40 12:33:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:19 Set channel filter=0.000000e+000 result=40 12:33:19 Config A/D Result=40 12:33:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:19 Get A/D filter: -9.255963e+061 result=40 12:33:19 Get A/D value=-858993460 result=40 12:33:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:33:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:33:19 Aux= 12:33:19 Message to Camera, serial 106039 queued 12:33:38 Received message from Master: op=Identify serial=106040 12:33:55 Received message from Master: op=PointingHead serial=106054 12:33:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:33:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:33:55 Point started: ret=0 12:33:55 point_skyscan result=0 12:33:56 Check angles 12:33:56 SkyScan query 12:33:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.79<-13586 Statuses=0008 0009 12:33:56 Msec=0 True Az=112.995 Ze=-23.79 Az status=0008 Ze status=0009 12:33:56 Check angles 12:33:56 SkyScan query 12:33:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.7<-14980 Statuses=0008 0009 12:33:57 Msec=750 True Az=112.995 Ze=-44.7 Az status=0008 Ze status=0009 12:33:57 Check angles 12:33:57 SkyScan query 12:33:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.15<-16410 Statuses=0008 0009 12:33:58 Msec=1500 True Az=112.995 Ze=-66.15 Az status=0008 Ze status=0009 12:33:58 Check angles 12:33:58 SkyScan query 12:33:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.12<-17808 Statuses=0008 0009 12:33:58 Msec=2250 True Az=112.995 Ze=-87.12 Az status=0008 Ze status=0009 12:33:59 Check angles 12:33:59 SkyScan query 12:33:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.09<-19206 Statuses=0008 0009 12:33:59 Msec=3000 True Az=112.995 Ze=-108.09 Az status=0008 Ze status=0009 12:33:59 Check angles 12:33:59 SkyScan query 12:34:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.015<-20601 Statuses=0008 0009 12:34:00 Msec=3750 True Az=112.995 Ze=-129.015 Az status=0008 Ze status=0009 12:34:00 Check angles 12:34:00 SkyScan query 12:34:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.97<-21998 Statuses=0008 0009 12:34:01 Msec=4500 True Az=112.995 Ze=-149.97 Az status=0008 Ze status=0009 12:34:01 Check angles 12:34:01 SkyScan query 12:34:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.835<-23389 Statuses=0008 0009 12:34:01 Msec=5250 True Az=112.995 Ze=-170.835 Az status=0008 Ze status=0009 12:34:02 Check angles 12:34:02 SkyScan query 12:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:34:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:34:02 Message to Master queued w/err=0: serial=106054 error=0 12:34:07 Received message from Master: op=Filter serial=106055 12:34:07 Color wheel filter change from 0 to 0 12:34:07 FLIGetFilterPos err=0 currentPosition=0 12:34:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:07 Filter is already there-color wheel unchanged 12:34:07 Received message from Master: op=Shutter serial=106056 12:34:07 Shutter LASER open 12:34:08 Received message from Camera: op=State serial=106058 12:34:08 GetSingleValue result=40 Value=cccccccc 12:34:08 SkyScan query 12:34:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:34:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:08 Parameters OK 12:34:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:08 Set A/D data flow result=40 12:34:08 Set A/D channel type result=40 12:34:08 Set A/D encoding result=40 12:34:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:08 Set channel filter=0.000000e+000 result=40 12:34:08 Config A/D Result=40 12:34:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:08 Get A/D filter: -9.255963e+061 result=40 12:34:08 Get A/D value=-858993460 result=40 12:34:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:08 Parameters OK 12:34:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:08 Set A/D data flow result=40 [UTC 2019-3-4 12:34:08] 12:34:08 Set A/D channel type result=40 12:34:08 Set A/D encoding result=40 12:34:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:08 Set channel filter=0.000000e+000 result=40 12:34:08 Config A/D Result=40 12:34:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:08 Get A/D filter: -9.255963e+061 result=40 12:34:08 Get A/D value=-858993460 result=40 12:34:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:08 Aux= 12:34:08 Message to Camera, serial 106058 queued 12:34:17 Received message from Master: op=Shutter serial=106068 12:34:17 Shutter LASER close 12:34:17 Received message from Master: op=PointingHead serial=106072 12:34:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:34:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:34:17 Point started: ret=0 12:34:17 point_skyscan result=0 12:34:18 Check angles 12:34:18 SkyScan query 12:34:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.785<-21519 Statuses=0008 0009 12:34:19 Msec=0 True Az=112.995 Ze=-142.785 Az status=0008 Ze status=0009 12:34:19 Check angles 12:34:19 SkyScan query 12:34:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 12:34:19 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 12:34:20 Check angles 12:34:20 SkyScan query 12:34:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.44<-18696 Statuses=0008 0009 12:34:20 Msec=1500 True Az=112.995 Ze=-100.44 Az status=0008 Ze status=0009 12:34:20 Check angles 12:34:20 SkyScan query 12:34:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.47<-17298 Statuses=0008 0009 12:34:21 Msec=2250 True Az=112.995 Ze=-79.47 Az status=0008 Ze status=0009 12:34:21 Check angles 12:34:21 SkyScan query 12:34:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.53<-15902 Statuses=0008 0009 12:34:22 Msec=3000 True Az=112.995 Ze=-58.53 Az status=0008 Ze status=0009 12:34:22 Check angles 12:34:22 SkyScan query 12:34:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.2<-14480 Statuses=0008 0009 12:34:22 Msec=3750 True Az=112.995 Ze=-37.2 Az status=0008 Ze status=0009 12:34:23 Check angles 12:34:23 SkyScan query 12:34:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.2<-13080 Statuses=0008 0009 12:34:23 Msec=4500 True Az=112.995 Ze=-16.2 Az status=0008 Ze status=0009 12:34:23 Check angles 12:34:23 SkyScan query 12:34:24 SkyScan query done: ret=0 az=112.995<-7533 ze=4.575<-11695 Statuses=0008 0009 12:34:24 Msec=5250 True Az=112.995 Ze=4.575 Az status=0008 Ze status=0009 12:34:24 Check angles 12:34:24 SkyScan query 12:34:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:34:25 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:34:25 Message to Master queued w/err=0: serial=106072 error=0 12:34:30 Received message from Master: op=Filter serial=106073 12:34:30 Color wheel filter change from 0 to 0 12:34:30 FLIGetFilterPos err=0 currentPosition=0 12:34:30 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:30 Filter is already there-color wheel unchanged 12:34:30 Received message from Master: op=Shutter serial=106074 12:34:30 Shutter LASER close 12:34:30 Received message from Camera: op=State serial=106076 12:34:30 GetSingleValue result=40 Value=cccccccc 12:34:30 SkyScan query 12:34:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:34:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:31 Parameters OK 12:34:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:31 Set A/D data flow result=40 12:34:31 Set A/D channel type result=40 12:34:31 Set A/D encoding result=40 12:34:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:31 Set channel filter=0.000000e+000 result=40 12:34:31 Config A/D Result=40 12:34:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:31 Get A/D filter: -9.255963e+061 result=40 12:34:31 Get A/D value=-858993460 result=40 12:34:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:31 Parameters OK 12:34:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:31 Set A/D data flow result=40 12:34:31 Set A/D channel type result=40 12:34:31 Set A/D encoding result=40 12:34:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:31 Set channel filter=0.000000e+000 result=40 12:34:31 Config A/D Result=40 12:34:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:31 Get A/D filter: -9.255963e+061 result=40 12:34:31 Get A/D value=-858993460 result=40 12:34:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:31 Aux= 12:34:31 Message to Camera, serial 106076 queued 12:35:08 Received message from Master: op=PointingHead serial=106089 12:35:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:35:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:35:08 Point started: ret=0 12:35:08 point_skyscan result=0 12:35:09 Check angles 12:35:09 SkyScan query 12:35:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:35:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:35:09 Message to Master queued w/err=0: serial=106089 error=0 12:35:14 Received message from Master: op=Filter serial=106090 12:35:14 Color wheel filter change from 0 to 0 12:35:14 FLIGetFilterPos err=0 currentPosition=0 12:35:14 FLIGetStepsRemaining err=0 RemainingSteps=0 12:35:14 Filter is already there-color wheel unchanged 12:35:14 Received message from Master: op=Shutter serial=106091 12:35:14 Shutter LASER close 12:35:14 Received message from Camera: op=State serial=106093 12:35:14 GetSingleValue result=40 Value=cccccccc 12:35:14 SkyScan query 12:35:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:35:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:15 Parameters OK 12:35:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:15 Set A/D data flow result=40 12:35:15 Set A/D channel type result=40 12:35:15 Set A/D encoding result=40 12:35:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:15 Set channel filter=0.000000e+000 result=40 12:35:15 Config A/D Result=40 12:35:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:15 Get A/D filter: -9.255963e+061 result=40 12:35:15 Get A/D value=-858993460 result=40 12:35:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:15 Parameters OK 12:35:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:15 Set A/D data flow result=40 12:35:15 Set A/D channel type result=40 12:35:15 Set A/D encoding result=40 12:35:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:15 Set channel filter=0.000000e+000 result=40 12:35:15 Config A/D Result=40 12:35:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:15 Get A/D filter: -9.255963e+061 result=40 12:35:15 Get A/D value=-858993460 result=40 12:35:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:35:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:35:15 Aux= 12:35:15 Message to Camera, serial 106093 queued 12:35:52 Received message from Master: op=PointingHead serial=106106 12:35:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:35:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:35:52 Point started: ret=0 12:35:52 point_skyscan result=0 12:35:53 Check angles 12:35:53 SkyScan query 12:35:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:35:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:35:53 Message to Master queued w/err=0: serial=106106 error=0 12:35:58 Received message from Master: op=Filter serial=106107 12:35:58 Color wheel filter change from 0 to 0 12:35:58 FLIGetFilterPos err=0 currentPosition=0 12:35:58 FLIGetStepsRemaining err=0 RemainingSteps=0 12:35:58 Filter is already there-color wheel unchanged 12:35:59 Received message from Master: op=Shutter serial=106108 12:35:59 Shutter LASER close 12:35:59 Received message from Camera: op=State serial=106110 12:35:59 GetSingleValue result=40 Value=cccccccc 12:35:59 SkyScan query 12:35:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:35:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:59 Parameters OK 12:35:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:59 Set A/D data flow result=40 12:35:59 Set A/D channel type result=40 12:35:59 Set A/D encoding result=40 12:35:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:59 Set channel filter=0.000000e+000 result=40 12:35:59 Config A/D Result=40 12:35:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:59 Get A/D filter: -9.255963e+061 result=40 12:35:59 Get A/D value=-858993460 result=40 12:35:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:59 Parameters OK 12:35:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:59 Set A/D data flow result=40 12:35:59 Set A/D channel type result=40 12:35:59 Set A/D encoding result=40 12:35:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:59 Set channel filter=0.000000e+000 result=40 12:35:59 Config A/D Result=40 12:35:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:59 Get A/D filter: -9.255963e+061 result=40 12:35:59 Get A/D value=-858993460 result=40 12:35:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:35:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:35:59 Aux= 12:35:59 Message to Camera, serial 106110 queued 12:36:35 Received message from Master: op=PointingHead serial=106122 12:36:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:36:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:36:35 Point started: ret=0 12:36:35 point_skyscan result=0 12:36:36 Check angles 12:36:36 SkyScan query 12:36:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:36:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:36:37 Message to Master queued w/err=0: serial=106122 error=0 12:36:42 Received message from Master: op=Filter serial=106123 12:36:42 Color wheel filter change from 0 to 0 12:36:42 FLIGetFilterPos err=0 currentPosition=0 12:36:42 FLIGetStepsRemaining err=0 RemainingSteps=0 12:36:42 Filter is already there-color wheel unchanged 12:36:42 Received message from Master: op=Shutter serial=106124 12:36:42 Shutter LASER close 12:36:42 Received message from Camera: op=State serial=106126 12:36:42 GetSingleValue result=40 Value=cccccccc 12:36:42 SkyScan query 12:36:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:36:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:43 Parameters OK 12:36:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:43 Set A/D data flow result=40 12:36:43 Set A/D channel type result=40 12:36:43 Set A/D encoding result=40 12:36:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:43 Set channel filter=0.000000e+000 result=40 12:36:43 Config A/D Result=40 12:36:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:43 Get A/D filter: -9.255963e+061 result=40 12:36:43 Get A/D value=-858993460 result=40 12:36:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:43 Parameters OK 12:36:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:43 Set A/D data flow result=40 12:36:43 Set A/D channel type result=40 12:36:43 Set A/D encoding result=40 12:36:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:43 Set channel filter=0.000000e+000 result=40 12:36:43 Config A/D Result=40 12:36:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:43 Get A/D filter: -9.255963e+061 result=40 12:36:43 Get A/D value=-858993460 result=40 12:36:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:36:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:36:43 Aux= 12:36:43 Message to Camera, serial 106126 queued 12:37:19 Received message from Master: op=PointingHead serial=106138 12:37:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:37:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:37:19 Point started: ret=0 12:37:19 point_skyscan result=0 12:37:20 Check angles 12:37:20 SkyScan query 12:37:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 12:37:20 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 12:37:20 Check angles 12:37:20 SkyScan query 12:37:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.22<-14948 Statuses=0008 0009 12:37:21 Msec=750 True Az=112.995 Ze=-44.22 Az status=0008 Ze status=0009 12:37:21 Check angles 12:37:21 SkyScan query 12:37:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.235<-16349 Statuses=0008 0009 12:37:22 Msec=1500 True Az=112.995 Ze=-65.235 Az status=0008 Ze status=0009 12:37:22 Check angles 12:37:22 SkyScan query 12:37:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.1<-17740 Statuses=0008 0009 12:37:22 Msec=2250 True Az=112.995 Ze=-86.1 Az status=0008 Ze status=0009 12:37:23 Check angles 12:37:23 SkyScan query 12:37:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.01<-19134 Statuses=0008 0009 12:37:23 Msec=3000 True Az=112.995 Ze=-107.01 Az status=0008 Ze status=0009 12:37:23 Check angles 12:37:23 SkyScan query 12:37:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.995<-20533 Statuses=0008 0009 12:37:24 Msec=3750 True Az=112.995 Ze=-127.995 Az status=0008 Ze status=0009 12:37:24 Check angles 12:37:24 SkyScan query 12:37:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.965<-21931 Statuses=0008 0009 12:37:25 Msec=4500 True Az=112.995 Ze=-148.965 Az status=0008 Ze status=0009 12:37:25 Check angles 12:37:25 SkyScan query 12:37:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.905<-23327 Statuses=0008 0009 12:37:25 Msec=5250 True Az=112.995 Ze=-169.905 Az status=0008 Ze status=0009 12:37:26 Check angles 12:37:26 SkyScan query 12:37:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:37:26 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:37:26 Message to Master queued w/err=0: serial=106138 error=0 12:37:31 Received message from Master: op=Filter serial=106139 12:37:31 Color wheel filter change from 0 to 0 12:37:31 FLIGetFilterPos err=0 currentPosition=0 12:37:31 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:31 Filter is already there-color wheel unchanged 12:37:31 Received message from Master: op=Shutter serial=106140 12:37:31 Shutter LASER open 12:37:32 Received message from Camera: op=State serial=106142 12:37:32 GetSingleValue result=40 Value=cccccccc 12:37:32 SkyScan query 12:37:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:37:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:32 Parameters OK 12:37:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:32 Set A/D data flow result=40 12:37:32 Set A/D channel type result=40 12:37:32 Set A/D encoding result=40 12:37:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:32 Set channel filter=0.000000e+000 result=40 12:37:32 Config A/D Result=40 12:37:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:32 Get A/D filter: -9.255963e+061 result=40 12:37:32 Get A/D value=-858993460 result=40 12:37:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:32 Parameters OK 12:37:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:32 Set A/D data flow result=40 12:37:32 Set A/D channel type result=40 12:37:32 Set A/D encoding result=40 12:37:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:32 Set channel filter=0.000000e+000 result=40 12:37:32 Config A/D Result=40 12:37:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:32 Get A/D filter: -9.255963e+061 result=40 12:37:32 Get A/D value=-858993460 result=40 12:37:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:32 Aux= 12:37:32 Message to Camera, serial 106142 queued 12:37:41 Received message from Master: op=Shutter serial=106152 12:37:41 Shutter LASER close 12:37:41 Received message from Master: op=PointingHead serial=106156 12:37:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:37:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:37:41 Point started: ret=0 12:37:41 point_skyscan result=0 12:37:42 Check angles 12:37:42 SkyScan query 12:37:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.475<-21565 Statuses=0008 0009 12:37:43 Msec=0 True Az=112.995 Ze=-143.475 Az status=0008 Ze status=0009 12:37:43 Check angles 12:37:43 SkyScan query 12:37:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.55<-20170 Statuses=0008 0009 12:37:44 Msec=750 True Az=112.995 Ze=-122.55 Az status=0008 Ze status=0009 12:37:44 Check angles 12:37:44 SkyScan query 12:37:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.16<-18744 Statuses=0008 0009 12:37:44 Msec=1500 True Az=112.995 Ze=-101.16 Az status=0008 Ze status=0009 12:37:44 Check angles 12:37:44 SkyScan query 12:37:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 12:37:45 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 12:37:45 Check angles 12:37:45 SkyScan query 12:37:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 12:37:46 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 12:37:46 Check angles 12:37:46 SkyScan query 12:37:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.8<-14520 Statuses=0008 0009 12:37:47 Msec=3750 True Az=112.995 Ze=-37.8 Az status=0008 Ze status=0009 12:37:47 Check angles 12:37:47 SkyScan query 12:37:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.83<-13122 Statuses=0008 0009 12:37:47 Msec=4500 True Az=112.995 Ze=-16.83 Az status=0008 Ze status=0009 12:37:47 Check angles 12:37:47 SkyScan query 12:37:48 SkyScan query done: ret=0 az=112.995<-7533 ze=4.08<-11728 Statuses=0008 0009 12:37:48 Msec=5250 True Az=112.995 Ze=4.08 Az status=0008 Ze status=0009 12:37:48 Check angles 12:37:48 SkyScan query 12:37:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:37:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:37:49 Message to Master queued w/err=0: serial=106156 error=0 12:37:54 Received message from Master: op=Filter serial=106157 12:37:54 Color wheel filter change from 0 to 0 12:37:54 FLIGetFilterPos err=0 currentPosition=0 12:37:54 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:54 Filter is already there-color wheel unchanged 12:37:54 Received message from Master: op=Shutter serial=106158 12:37:54 Shutter LASER close 12:37:54 Received message from Camera: op=State serial=106160 12:37:54 GetSingleValue result=40 Value=cccccccc 12:37:54 SkyScan query 12:37:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:37:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:55 Parameters OK 12:37:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:55 Set A/D data flow result=40 12:37:55 Set A/D channel type result=40 12:37:55 Set A/D encoding result=40 12:37:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:55 Set channel filter=0.000000e+000 result=40 12:37:55 Config A/D Result=40 12:37:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:55 Get A/D filter: -9.255963e+061 result=40 12:37:55 Get A/D value=-858993460 result=40 12:37:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:55 Parameters OK 12:37:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:55 Set A/D data flow result=40 12:37:55 Set A/D channel type result=40 12:37:55 Set A/D encoding result=40 12:37:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:55 Set channel filter=0.000000e+000 result=40 12:37:55 Config A/D Result=40 12:37:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:55 Get A/D filter: -9.255963e+061 result=40 12:37:55 Get A/D value=-858993460 result=40 12:37:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:55 Aux= 12:37:55 Message to Camera, serial 106160 queued 12:38:32 Received message from Master: op=PointingHead serial=106173 12:38:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:38:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:38:32 Point started: ret=0 12:38:32 point_skyscan result=0 12:38:33 Check angles 12:38:33 SkyScan query 12:38:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:38:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:38:33 Message to Master queued w/err=0: serial=106173 error=0 12:38:38 Received message from Master: op=Filter serial=106174 12:38:38 Color wheel filter change from 0 to 0 12:38:38 FLIGetFilterPos err=0 currentPosition=0 12:38:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:38:38 Filter is already there-color wheel unchanged 12:38:38 Received message from Master: op=Shutter serial=106175 12:38:38 Shutter LASER close 12:38:38 Received message from Camera: op=State serial=106177 12:38:38 GetSingleValue result=40 Value=cccccccc 12:38:38 SkyScan query 12:38:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:38:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:39 Parameters OK 12:38:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:39 Set A/D data flow result=40 12:38:39 Set A/D channel type result=40 12:38:39 Set A/D encoding result=40 12:38:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:39 Set channel filter=0.000000e+000 result=40 12:38:39 Config A/D Result=40 12:38:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:39 Get A/D filter: -9.255963e+061 result=40 12:38:39 Get A/D value=-858993460 result=40 12:38:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:39 Parameters OK 12:38:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:39 Set A/D data flow result=40 12:38:39 Set A/D channel type result=40 12:38:39 Set A/D encoding result=40 12:38:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:39 Set channel filter=0.000000e+000 result=40 12:38:39 Config A/D Result=40 12:38:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:39 Get A/D filter: -9.255963e+061 result=40 12:38:39 Get A/D value=-858993460 result=40 12:38:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:38:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:38:39 Aux= 12:38:39 Message to Camera, serial 106177 queued 12:39:16 Received message from Master: op=PointingHead serial=106190 12:39:16 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:39:16 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:39:16 Point started: ret=0 12:39:16 point_skyscan result=0 12:39:17 Check angles 12:39:17 SkyScan query 12:39:18 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 12:39:18 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 12:39:18 Check angles 12:39:18 SkyScan query 12:39:18 SkyScan query done: ret=0 az=153.495<-10233 ze=-6.495<-12433 Statuses=0009 0008 12:39:18 Msec=750 True Az=153.495 Ze=-6.495 Az status=0009 Ze status=0008 12:39:18 Check angles 12:39:18 SkyScan query 12:39:19 SkyScan query done: ret=0 az=170.985<-11399 ze=-6.495<-12433 Statuses=0009 0008 12:39:19 Msec=1500 True Az=170.985 Ze=-6.495 Az status=0009 Ze status=0008 12:39:19 Check angles 12:39:19 SkyScan query 12:39:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:39:20 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:39:20 Message to Master queued w/err=0: serial=106190 error=0 12:39:25 Received message from Master: op=Filter serial=106191 12:39:25 Color wheel filter change from 0 to 0 12:39:25 FLIGetFilterPos err=0 currentPosition=0 12:39:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:39:25 Filter is already there-color wheel unchanged 12:39:25 Received message from Master: op=Shutter serial=106192 12:39:25 Shutter LASER close 12:39:25 Received message from Camera: op=State serial=106194 12:39:25 GetSingleValue result=40 Value=cccccccc 12:39:25 SkyScan query 12:39:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:39:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:26 Parameters OK 12:39:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:26 Set A/D data flow result=40 12:39:26 Set A/D channel type result=40 12:39:26 Set A/D encoding result=40 12:39:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:26 Set channel filter=0.000000e+000 result=40 12:39:26 Config A/D Result=40 12:39:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:26 Get A/D filter: -9.255963e+061 result=40 12:39:26 Get A/D value=-858993460 result=40 12:39:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:26 Parameters OK 12:39:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:26 Set A/D data flow result=40 12:39:26 Set A/D channel type result=40 12:39:26 Set A/D encoding result=40 12:39:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:26 Set channel filter=0.000000e+000 result=40 12:39:26 Config A/D Result=40 12:39:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:26 Get A/D filter: -9.255963e+061 result=40 12:39:26 Get A/D value=-858993460 result=40 12:39:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:39:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:39:26 Aux= 12:39:26 Message to Camera, serial 106194 queued 12:40:02 Received message from Master: op=PointingHead serial=106207 12:40:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:40:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:40:03 Point started: ret=0 12:40:03 point_skyscan result=0 12:40:03 Check angles 12:40:03 SkyScan query 12:40:04 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 12:40:04 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 12:40:04 Check angles 12:40:04 SkyScan query 12:40:05 SkyScan query done: ret=0 az=135.375<-9025 ze=6.495<-11567 Statuses=0009 0008 12:40:05 Msec=750 True Az=135.375 Ze=6.495 Az status=0009 Ze status=0008 12:40:05 Check angles 12:40:05 SkyScan query 12:40:06 SkyScan query done: ret=0 az=117.9<-7860 ze=6.495<-11567 Statuses=0009 0008 12:40:06 Msec=1500 True Az=117.9 Ze=6.495 Az status=0009 Ze status=0008 12:40:06 Check angles 12:40:06 SkyScan query 12:40:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:40:06 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:40:06 Message to Master queued w/err=0: serial=106207 error=0 12:40:11 Received message from Master: op=Filter serial=106208 12:40:11 Color wheel filter change from 0 to 0 12:40:11 FLIGetFilterPos err=0 currentPosition=0 12:40:11 FLIGetStepsRemaining err=0 RemainingSteps=0 12:40:11 Filter is already there-color wheel unchanged 12:40:11 Received message from Master: op=Shutter serial=106209 12:40:11 Shutter LASER close 12:40:12 Received message from Camera: op=State serial=106211 12:40:12 GetSingleValue result=40 Value=cccccccc 12:40:12 SkyScan query 12:40:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:40:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:12 Parameters OK 12:40:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:12 Set A/D data flow result=40 12:40:12 Set A/D channel type result=40 12:40:12 Set A/D encoding result=40 12:40:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:12 Set channel filter=0.000000e+000 result=40 12:40:12 Config A/D Result=40 12:40:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:12 Get A/D filter: -9.255963e+061 result=40 12:40:12 Get A/D value=-858993460 result=40 12:40:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:12 Parameters OK 12:40:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:12 Set A/D data flow result=40 12:40:12 Set A/D channel type result=40 12:40:12 Set A/D encoding result=40 12:40:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:12 Set channel filter=0.000000e+000 result=40 12:40:12 Config A/D Result=40 12:40:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:12 Get A/D filter: -9.255963e+061 result=40 12:40:12 Get A/D value=-858993460 result=40 12:40:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:40:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:40:12 Aux= 12:40:12 Message to Camera, serial 106211 queued 12:40:49 Received message from Master: op=PointingHead serial=106224 12:40:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:40:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:40:49 Point started: ret=0 12:40:49 point_skyscan result=0 12:40:50 Check angles 12:40:50 SkyScan query 12:40:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.775<-13585 Statuses=0008 0009 12:40:51 Msec=0 True Az=112.995 Ze=-23.775 Az status=0008 Ze status=0009 12:40:51 Check angles 12:40:51 SkyScan query 12:40:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 12:40:51 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 12:40:52 Check angles 12:40:52 SkyScan query 12:40:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.67<-16378 Statuses=0008 0009 12:40:52 Msec=1500 True Az=112.995 Ze=-65.67 Az status=0008 Ze status=0009 12:40:52 Check angles 12:40:52 SkyScan query 12:40:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 12:40:53 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 12:40:53 Check angles 12:40:53 SkyScan query 12:40:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.61<-19174 Statuses=0008 0009 12:40:54 Msec=3000 True Az=112.995 Ze=-107.61 Az status=0008 Ze status=0009 12:40:54 Check angles 12:40:54 SkyScan query 12:40:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-129<-20600 Statuses=0008 0009 12:40:54 Msec=3750 True Az=112.995 Ze=-129 Az status=0008 Ze status=0009 12:40:55 Check angles 12:40:55 SkyScan query 12:40:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.97<-21998 Statuses=0008 0009 12:40:55 Msec=4500 True Az=112.995 Ze=-149.97 Az status=0008 Ze status=0009 12:40:55 Check angles 12:40:55 SkyScan query 12:40:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.835<-23389 Statuses=0008 0009 12:40:56 Msec=5250 True Az=112.995 Ze=-170.835 Az status=0008 Ze status=0009 12:40:56 Check angles 12:40:56 SkyScan query 12:40:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:40:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:40:57 Message to Master queued w/err=0: serial=106224 error=0 12:41:02 Received message from Master: op=Filter serial=106225 12:41:02 Color wheel filter change from 0 to 0 12:41:02 FLIGetFilterPos err=0 currentPosition=0 12:41:02 FLIGetStepsRemaining err=0 RemainingSteps=0 12:41:02 Filter is already there-color wheel unchanged 12:41:02 Received message from Master: op=Shutter serial=106226 12:41:02 Shutter LASER open 12:41:02 Received message from Camera: op=State serial=106228 12:41:02 GetSingleValue result=40 Value=cccccccc 12:41:02 SkyScan query 12:41:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:41:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:03 Parameters OK 12:41:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:03 Set A/D data flow result=40 12:41:03 Set A/D channel type result=40 12:41:03 Set A/D encoding result=40 12:41:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:03 Set channel filter=0.000000e+000 result=40 12:41:03 Config A/D Result=40 12:41:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:03 Get A/D filter: -9.255963e+061 result=40 12:41:03 Get A/D value=-858993460 result=40 12:41:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:03 Parameters OK 12:41:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:03 Set A/D data flow result=40 12:41:03 Set A/D channel type result=40 12:41:03 Set A/D encoding result=40 12:41:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:03 Set channel filter=0.000000e+000 result=40 12:41:03 Config A/D Result=40 12:41:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:03 Get A/D filter: -9.255963e+061 result=40 12:41:03 Get A/D value=-858993460 result=40 12:41:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:41:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:41:03 Aux= 12:41:03 Message to Camera, serial 106228 queued 12:41:11 Received message from Master: op=Shutter serial=106238 12:41:11 Shutter LASER close 12:41:11 Received message from Master: op=PointingHead serial=106242 12:41:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:41:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:41:12 Point started: ret=0 12:41:12 point_skyscan result=0 12:41:13 Check angles 12:41:13 SkyScan query 12:41:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 12:41:13 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 12:41:13 Check angles 12:41:13 SkyScan query 12:41:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 12:41:14 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 12:41:14 Check angles 12:41:14 SkyScan query 12:41:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.725<-18715 Statuses=0008 0009 12:41:15 Msec=1500 True Az=112.995 Ze=-100.725 Az status=0008 Ze status=0009 12:41:15 Check angles 12:41:15 SkyScan query 12:41:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.875<-17325 Statuses=0008 0009 12:41:15 Msec=2250 True Az=112.995 Ze=-79.875 Az status=0008 Ze status=0009 12:41:16 Check angles 12:41:16 SkyScan query 12:41:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.935<-15929 Statuses=0008 0009 12:41:16 Msec=3000 True Az=112.995 Ze=-58.935 Az status=0008 Ze status=0009 12:41:16 Check angles 12:41:16 SkyScan query 12:41:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.92<-14528 Statuses=0008 0009 12:41:17 Msec=3750 True Az=112.995 Ze=-37.92 Az status=0008 Ze status=0009 12:41:17 Check angles 12:41:17 SkyScan query 12:41:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.98<-13132 Statuses=0008 0009 12:41:18 Msec=4500 True Az=112.995 Ze=-16.98 Az status=0008 Ze status=0009 12:41:18 Check angles 12:41:18 SkyScan query 12:41:18 SkyScan query done: ret=0 az=112.995<-7533 ze=3.975<-11735 Statuses=0008 0009 12:41:18 Msec=5250 True Az=112.995 Ze=3.975 Az status=0008 Ze status=0009 12:41:19 Check angles 12:41:19 SkyScan query 12:41:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:41:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:41:19 Message to Master queued w/err=0: serial=106242 error=0 12:41:24 Received message from Master: op=Filter serial=106243 12:41:24 Color wheel filter change from 0 to 0 12:41:24 FLIGetFilterPos err=0 currentPosition=0 12:41:24 FLIGetStepsRemaining err=0 RemainingSteps=0 12:41:24 Filter is already there-color wheel unchanged 12:41:24 Received message from Master: op=Shutter serial=106244 12:41:24 Shutter LASER close 12:41:25 Received message from Camera: op=State serial=106246 12:41:25 GetSingleValue result=40 Value=cccccccc 12:41:25 SkyScan query 12:41:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:41:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:25 Parameters OK 12:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:25 Set A/D data flow result=40 12:41:25 Set A/D channel type result=40 12:41:25 Set A/D encoding result=40 12:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:25 Set channel filter=0.000000e+000 result=40 12:41:25 Config A/D Result=40 12:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:25 Get A/D filter: -9.255963e+061 result=40 12:41:25 Get A/D value=-858993460 result=40 12:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:25 Parameters OK 12:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:25 Set A/D data flow result=40 12:41:25 Set A/D channel type result=40 12:41:25 Set A/D encoding result=40 12:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:25 Set channel filter=0.000000e+000 result=40 12:41:25 Config A/D Result=40 12:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:25 Get A/D filter: -9.255963e+061 result=40 12:41:25 Get A/D value=-858993460 result=40 12:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:41:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:41:25 Aux= 12:41:25 Message to Camera, serial 106246 queued 12:42:02 Received message from Master: op=PointingHead serial=106259 12:42:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:42:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:42:02 Point started: ret=0 12:42:02 point_skyscan result=0 12:42:03 Check angles 12:42:03 SkyScan query 12:42:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:42:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:42:04 Message to Master queued w/err=0: serial=106259 error=0 12:42:09 Received message from Master: op=Filter serial=106260 12:42:09 Color wheel filter change from 0 to 0 12:42:09 FLIGetFilterPos err=0 currentPosition=0 12:42:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:42:09 Filter is already there-color wheel unchanged 12:42:09 Received message from Master: op=Shutter serial=106261 12:42:09 Shutter LASER close 12:42:09 Received message from Camera: op=State serial=106263 12:42:09 GetSingleValue result=40 Value=cccccccc 12:42:09 SkyScan query 12:42:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:42:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:09 Parameters OK 12:42:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:09 Set A/D data flow result=40 12:42:09 Set A/D channel type result=40 12:42:09 Set A/D encoding result=40 12:42:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:09 Set channel filter=0.000000e+000 result=40 12:42:09 Config A/D Result=40 12:42:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:09 Get A/D filter: -9.255963e+061 result=40 12:42:09 Get A/D value=-858993460 result=40 12:42:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:09 Parameters OK 12:42:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:09 Set A/D data flow result=40 12:42:09 Set A/D channel type result=40 12:42:09 Set A/D encoding result=40 12:42:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:09 Set channel filter=0.000000e+000 result=40 12:42:09 Config A/D Result=40 12:42:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:09 Get A/D filter: -9.255963e+061 result=40 12:42:09 Get A/D value=-858993460 result=40 12:42:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:42:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:42:09 Aux= 12:42:09 Message to Camera, serial 106263 queued 12:42:46 Received message from Master: op=PointingHead serial=106276 12:42:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:42:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:42:47 Point started: ret=0 12:42:47 point_skyscan result=0 12:42:47 Check angles 12:42:47 SkyScan query 12:42:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:42:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:42:48 Message to Master queued w/err=0: serial=106276 error=0 12:42:53 Received message from Master: op=Filter serial=106277 12:42:53 Color wheel filter change from 0 to 0 12:42:53 FLIGetFilterPos err=0 currentPosition=0 12:42:53 FLIGetStepsRemaining err=0 RemainingSteps=0 12:42:53 Filter is already there-color wheel unchanged 12:42:53 Received message from Master: op=Shutter serial=106278 12:42:53 Shutter LASER close 12:42:53 Received message from Camera: op=State serial=106280 12:42:53 GetSingleValue result=40 Value=cccccccc 12:42:53 SkyScan query 12:42:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:42:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:54 Parameters OK 12:42:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:54 Set A/D data flow result=40 12:42:54 Set A/D channel type result=40 12:42:54 Set A/D encoding result=40 12:42:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:54 Set channel filter=0.000000e+000 result=40 12:42:54 Config A/D Result=40 12:42:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:54 Get A/D filter: -9.255963e+061 result=40 12:42:54 Get A/D value=-858993460 result=40 12:42:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:54 Parameters OK 12:42:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:54 Set A/D data flow result=40 12:42:54 Set A/D channel type result=40 12:42:54 Set A/D encoding result=40 12:42:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:54 Set channel filter=0.000000e+000 result=40 12:42:54 Config A/D Result=40 12:42:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:54 Get A/D filter: -9.255963e+061 result=40 12:42:54 Get A/D value=-858993460 result=40 12:42:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:42:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:42:54 Aux= 12:42:54 Message to Camera, serial 106280 queued 12:43:31 Received message from Master: op=PointingHead serial=106293 12:43:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:43:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:43:31 Point started: ret=0 12:43:31 point_skyscan result=0 12:43:32 Check angles 12:43:32 SkyScan query 12:43:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:43:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:43:32 Message to Master queued w/err=0: serial=106293 error=0 12:43:37 Received message from Master: op=Filter serial=106294 12:43:37 Color wheel filter change from 0 to 0 12:43:37 FLIGetFilterPos err=0 currentPosition=0 12:43:37 FLIGetStepsRemaining err=0 RemainingSteps=0 12:43:37 Filter is already there-color wheel unchanged 12:43:37 Received message from Master: op=Shutter serial=106295 12:43:37 Shutter LASER close 12:43:37 Received message from Camera: op=State serial=106297 12:43:37 GetSingleValue result=40 Value=cccccccc 12:43:37 SkyScan query 12:43:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:43:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:38 Parameters OK 12:43:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:38 Set A/D data flow result=40 12:43:38 Set A/D channel type result=40 12:43:38 Set A/D encoding result=40 12:43:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:38 Set channel filter=0.000000e+000 result=40 12:43:38 Config A/D Result=40 12:43:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:38 Get A/D filter: -9.255963e+061 result=40 12:43:38 Get A/D value=-858993460 result=40 12:43:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:38 Parameters OK 12:43:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:38 Set A/D data flow result=40 12:43:38 Set A/D channel type result=40 12:43:38 Set A/D encoding result=40 12:43:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:38 Set channel filter=0.000000e+000 result=40 12:43:38 Config A/D Result=40 12:43:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:38 Get A/D filter: -9.255963e+061 result=40 12:43:38 Get A/D value=-858993460 result=40 12:43:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:38 Aux= 12:43:38 Message to Camera, serial 106297 queued [UTC 2019-3-4 12:43:50] 12:44:15 Received message from Master: op=PointingHead serial=106310 12:44:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:44:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:44:15 Point started: ret=0 12:44:15 point_skyscan result=0 12:44:16 Check angles 12:44:16 SkyScan query 12:44:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.43<-13562 Statuses=0008 0009 12:44:16 Msec=0 True Az=112.995 Ze=-23.43 Az status=0008 Ze status=0009 12:44:17 Check angles 12:44:17 SkyScan query 12:44:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 12:44:17 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 12:44:17 Check angles 12:44:17 SkyScan query 12:44:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.325<-16355 Statuses=0008 0009 12:44:18 Msec=1500 True Az=112.995 Ze=-65.325 Az status=0008 Ze status=0009 12:44:18 Check angles 12:44:18 SkyScan query 12:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.28<-17752 Statuses=0008 0009 12:44:19 Msec=2250 True Az=112.995 Ze=-86.28 Az status=0008 Ze status=0009 12:44:19 Check angles 12:44:19 SkyScan query 12:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.22<-19148 Statuses=0008 0009 12:44:19 Msec=3000 True Az=112.995 Ze=-107.22 Az status=0008 Ze status=0009 12:44:20 Check angles 12:44:20 SkyScan query 12:44:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.19<-20546 Statuses=0008 0009 12:44:20 Msec=3750 True Az=112.995 Ze=-128.19 Az status=0008 Ze status=0009 12:44:20 Check angles 12:44:20 SkyScan query 12:44:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.175<-21945 Statuses=0008 0009 12:44:21 Msec=4500 True Az=112.995 Ze=-149.175 Az status=0008 Ze status=0009 12:44:21 Check angles 12:44:21 SkyScan query 12:44:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.1<-23340 Statuses=0008 0009 12:44:22 Msec=5250 True Az=112.995 Ze=-170.1 Az status=0008 Ze status=0009 12:44:22 Check angles 12:44:22 SkyScan query 12:44:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:44:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:44:22 Message to Master queued w/err=0: serial=106310 error=0 12:44:27 Received message from Master: op=Filter serial=106311 12:44:27 Color wheel filter change from 0 to 0 12:44:27 FLIGetFilterPos err=0 currentPosition=0 12:44:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:27 Filter is already there-color wheel unchanged 12:44:28 Received message from Master: op=Shutter serial=106312 12:44:28 Shutter LASER open 12:44:28 Received message from Camera: op=State serial=106314 12:44:28 GetSingleValue result=40 Value=cccccccc 12:44:28 SkyScan query 12:44:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:44:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:28 Parameters OK 12:44:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:28 Set A/D data flow result=40 12:44:28 Set A/D channel type result=40 12:44:28 Set A/D encoding result=40 12:44:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:28 Set channel filter=0.000000e+000 result=40 12:44:28 Config A/D Result=40 12:44:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:28 Get A/D filter: -9.255963e+061 result=40 12:44:28 Get A/D value=-858993460 result=40 12:44:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:28 Parameters OK 12:44:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:28 Set A/D data flow result=40 12:44:28 Set A/D channel type result=40 12:44:28 Set A/D encoding result=40 12:44:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:28 Set channel filter=0.000000e+000 result=40 12:44:28 Config A/D Result=40 12:44:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:28 Get A/D filter: -9.255963e+061 result=40 12:44:28 Get A/D value=-858993460 result=40 12:44:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:28 Aux= 12:44:28 Message to Camera, serial 106314 queued 12:44:37 Received message from Master: op=Shutter serial=106324 12:44:37 Shutter LASER close 12:44:37 Received message from Master: op=PointingHead serial=106328 12:44:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:44:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:44:38 Point started: ret=0 12:44:38 point_skyscan result=0 12:44:39 Check angles 12:44:39 SkyScan query 12:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.875<-21525 Statuses=0008 0009 12:44:39 Msec=0 True Az=112.995 Ze=-142.875 Az status=0008 Ze status=0009 12:44:39 Check angles 12:44:39 SkyScan query 12:44:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.455<-20097 Statuses=0008 0009 12:44:40 Msec=750 True Az=112.995 Ze=-121.455 Az status=0008 Ze status=0009 12:44:40 Check angles 12:44:40 SkyScan query 12:44:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.5<-18700 Statuses=0008 0009 12:44:41 Msec=1500 True Az=112.995 Ze=-100.5 Az status=0008 Ze status=0009 12:44:41 Check angles 12:44:41 SkyScan query 12:44:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.545<-17303 Statuses=0008 0009 12:44:41 Msec=2250 True Az=112.995 Ze=-79.545 Az status=0008 Ze status=0009 12:44:42 Check angles 12:44:42 SkyScan query 12:44:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.14<-15876 Statuses=0008 0009 12:44:42 Msec=3000 True Az=112.995 Ze=-58.14 Az status=0008 Ze status=0009 12:44:42 Check angles 12:44:42 SkyScan query 12:44:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.26<-14484 Statuses=0008 0009 12:44:43 Msec=3750 True Az=112.995 Ze=-37.26 Az status=0008 Ze status=0009 12:44:43 Check angles 12:44:43 SkyScan query 12:44:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.275<-13085 Statuses=0008 0009 12:44:44 Msec=4500 True Az=112.995 Ze=-16.275 Az status=0008 Ze status=0009 12:44:44 Check angles 12:44:44 SkyScan query 12:44:44 SkyScan query done: ret=0 az=112.995<-7533 ze=4.53<-11698 Statuses=0008 0009 12:44:44 Msec=5250 True Az=112.995 Ze=4.53 Az status=0008 Ze status=0009 12:44:45 Check angles 12:44:45 SkyScan query 12:44:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:44:45 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:44:45 Message to Master queued w/err=0: serial=106328 error=0 12:44:50 Received message from Master: op=Filter serial=106329 12:44:50 Color wheel filter change from 0 to 0 12:44:50 FLIGetFilterPos err=0 currentPosition=0 12:44:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:50 Filter is already there-color wheel unchanged 12:44:50 Received message from Master: op=Shutter serial=106330 12:44:50 Shutter LASER close 12:44:51 Received message from Camera: op=State serial=106332 12:44:51 GetSingleValue result=40 Value=cccccccc 12:44:51 SkyScan query 12:44:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:44:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:51 Parameters OK 12:44:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:51 Set A/D data flow result=40 12:44:51 Set A/D channel type result=40 12:44:51 Set A/D encoding result=40 12:44:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:51 Set channel filter=0.000000e+000 result=40 12:44:51 Config A/D Result=40 12:44:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:51 Get A/D filter: -9.255963e+061 result=40 12:44:51 Get A/D value=-858993460 result=40 12:44:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:51 Parameters OK 12:44:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:51 Set A/D data flow result=40 12:44:51 Set A/D channel type result=40 12:44:51 Set A/D encoding result=40 12:44:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:51 Set channel filter=0.000000e+000 result=40 12:44:51 Config A/D Result=40 12:44:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:51 Get A/D filter: -9.255963e+061 result=40 12:44:51 Get A/D value=-858993460 result=40 12:44:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:51 Aux= 12:44:51 Message to Camera, serial 106332 queued 12:45:28 Received message from Master: op=PointingHead serial=106345 12:45:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:45:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:45:28 Point started: ret=0 12:45:28 point_skyscan result=0 12:45:29 Check angles 12:45:29 SkyScan query 12:45:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:45:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:45:30 Message to Master queued w/err=0: serial=106345 error=0 12:45:35 Received message from Master: op=Filter serial=106346 12:45:35 Color wheel filter change from 0 to 0 12:45:35 FLIGetFilterPos err=0 currentPosition=0 12:45:35 FLIGetStepsRemaining err=0 RemainingSteps=0 12:45:35 Filter is already there-color wheel unchanged 12:45:35 Received message from Master: op=Shutter serial=106347 12:45:35 Shutter LASER close 12:45:35 Received message from Camera: op=State serial=106349 12:45:35 GetSingleValue result=40 Value=cccccccc 12:45:35 SkyScan query 12:45:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:45:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:35 Parameters OK 12:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:35 Set A/D data flow result=40 12:45:35 Set A/D channel type result=40 12:45:35 Set A/D encoding result=40 12:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:35 Set channel filter=0.000000e+000 result=40 12:45:35 Config A/D Result=40 12:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:35 Get A/D filter: -9.255963e+061 result=40 12:45:35 Get A/D value=-858993460 result=40 12:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:35 Parameters OK 12:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:35 Set A/D data flow result=40 12:45:35 Set A/D channel type result=40 12:45:35 Set A/D encoding result=40 12:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:35 Set channel filter=0.000000e+000 result=40 12:45:35 Config A/D Result=40 12:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:35 Get A/D filter: -9.255963e+061 result=40 12:45:35 Get A/D value=-858993460 result=40 12:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:45:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:45:35 Aux= 12:45:35 Message to Camera, serial 106349 queued 12:46:11 Received message from Master: op=PointingHead serial=106361 12:46:11 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:46:11 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:46:12 Point started: ret=0 12:46:12 point_skyscan result=0 12:46:12 Check angles 12:46:12 SkyScan query 12:46:13 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 12:46:13 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 12:46:13 Check angles 12:46:13 SkyScan query 12:46:14 SkyScan query done: ret=0 az=153.78<-10252 ze=-6.495<-12433 Statuses=0009 0008 12:46:14 Msec=750 True Az=153.78 Ze=-6.495 Az status=0009 Ze status=0008 12:46:14 Check angles 12:46:14 SkyScan query 12:46:14 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 12:46:14 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 12:46:15 Check angles 12:46:15 SkyScan query 12:46:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:46:15 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:46:15 Message to Master queued w/err=0: serial=106361 error=0 12:46:20 Received message from Master: op=Filter serial=106362 12:46:20 Color wheel filter change from 0 to 0 12:46:20 FLIGetFilterPos err=0 currentPosition=0 12:46:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:46:20 Filter is already there-color wheel unchanged 12:46:20 Received message from Master: op=Shutter serial=106363 12:46:20 Shutter LASER close 12:46:20 Received message from Camera: op=State serial=106365 12:46:20 GetSingleValue result=40 Value=cccccccc 12:46:20 SkyScan query 12:46:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:46:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:21 Parameters OK 12:46:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:21 Set A/D data flow result=40 12:46:21 Set A/D channel type result=40 12:46:21 Set A/D encoding result=40 12:46:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:21 Set channel filter=0.000000e+000 result=40 12:46:21 Config A/D Result=40 12:46:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:21 Get A/D filter: -9.255963e+061 result=40 12:46:21 Get A/D value=-858993460 result=40 12:46:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:21 Parameters OK 12:46:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:21 Set A/D data flow result=40 12:46:21 Set A/D channel type result=40 12:46:21 Set A/D encoding result=40 12:46:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:21 Set channel filter=0.000000e+000 result=40 12:46:21 Config A/D Result=40 12:46:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:21 Get A/D filter: -9.255963e+061 result=40 12:46:21 Get A/D value=-858993460 result=40 12:46:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:46:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:46:21 Aux= 12:46:21 Message to Camera, serial 106365 queued 12:46:58 Received message from Master: op=PointingHead serial=106378 12:46:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:46:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:46:58 Point started: ret=0 12:46:58 point_skyscan result=0 12:46:59 Check angles 12:46:59 SkyScan query 12:47:00 SkyScan query done: ret=0 az=152.685<-10179 ze=6.51<-11566 Statuses=0009 0008 12:47:00 Msec=0 True Az=152.685 Ze=6.51 Az status=0009 Ze status=0008 12:47:00 Check angles 12:47:00 SkyScan query 12:47:00 SkyScan query done: ret=0 az=134.85<-8990 ze=6.495<-11567 Statuses=0009 0008 12:47:00 Msec=750 True Az=134.85 Ze=6.495 Az status=0009 Ze status=0008 12:47:00 Check angles 12:47:00 SkyScan query 12:47:01 SkyScan query done: ret=0 az=117.285<-7819 ze=6.495<-11567 Statuses=0009 0008 12:47:01 Msec=1500 True Az=117.285 Ze=6.495 Az status=0009 Ze status=0008 12:47:01 Check angles 12:47:01 SkyScan query 12:47:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:47:02 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:47:02 Message to Master queued w/err=0: serial=106378 error=0 12:47:07 Received message from Master: op=Filter serial=106379 12:47:07 Color wheel filter change from 0 to 0 12:47:07 FLIGetFilterPos err=0 currentPosition=0 12:47:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:47:07 Filter is already there-color wheel unchanged 12:47:07 Received message from Master: op=Shutter serial=106380 12:47:07 Shutter LASER close 12:47:07 Received message from Camera: op=State serial=106382 12:47:07 GetSingleValue result=40 Value=cccccccc 12:47:07 SkyScan query 12:47:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:47:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:08 Parameters OK 12:47:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:08 Set A/D data flow result=40 12:47:08 Set A/D channel type result=40 12:47:08 Set A/D encoding result=40 12:47:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:08 Set channel filter=0.000000e+000 result=40 12:47:08 Config A/D Result=40 12:47:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:08 Get A/D filter: -9.255963e+061 result=40 12:47:08 Get A/D value=-858993460 result=40 12:47:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:08 Parameters OK 12:47:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:08 Set A/D data flow result=40 12:47:08 Set A/D channel type result=40 12:47:08 Set A/D encoding result=40 12:47:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:08 Set channel filter=0.000000e+000 result=40 12:47:08 Config A/D Result=40 12:47:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:08 Get A/D filter: -9.255963e+061 result=40 12:47:08 Get A/D value=-858993460 result=40 12:47:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:47:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:47:08 Aux= 12:47:08 Message to Camera, serial 106382 queued 12:47:44 Received message from Master: op=PointingHead serial=106395 12:47:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:47:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:47:45 Point started: ret=0 12:47:45 point_skyscan result=0 12:47:46 Check angles 12:47:46 SkyScan query 12:47:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 12:47:46 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 12:47:46 Check angles 12:47:46 SkyScan query 12:47:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.055<-14937 Statuses=0008 0009 12:47:47 Msec=750 True Az=112.995 Ze=-44.055 Az status=0008 Ze status=0009 12:47:47 Check angles 12:47:47 SkyScan query 12:47:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.965<-16331 Statuses=0008 0009 12:47:48 Msec=1500 True Az=112.995 Ze=-64.965 Az status=0008 Ze status=0009 12:47:48 Check angles 12:47:48 SkyScan query 12:47:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.31<-17754 Statuses=0008 0009 12:47:48 Msec=2250 True Az=112.995 Ze=-86.31 Az status=0008 Ze status=0009 12:47:49 Check angles 12:47:49 SkyScan query 12:47:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.76<-19184 Statuses=0008 0009 12:47:49 Msec=3000 True Az=112.995 Ze=-107.76 Az status=0008 Ze status=0009 12:47:49 Check angles 12:47:49 SkyScan query 12:47:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.135<-20609 Statuses=0008 0009 12:47:50 Msec=3750 True Az=112.995 Ze=-129.135 Az status=0008 Ze status=0009 12:47:50 Check angles 12:47:50 SkyScan query 12:47:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.075<-22005 Statuses=0008 0009 12:47:51 Msec=4500 True Az=112.995 Ze=-150.075 Az status=0008 Ze status=0009 12:47:51 Check angles 12:47:51 SkyScan query 12:47:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.925<-23395 Statuses=0008 0009 12:47:51 Msec=5250 True Az=112.995 Ze=-170.925 Az status=0008 Ze status=0009 12:47:52 Check angles 12:47:52 SkyScan query 12:47:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:47:52 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:47:52 Message to Master queued w/err=0: serial=106395 error=0 12:47:57 Received message from Master: op=Filter serial=106396 12:47:57 Color wheel filter change from 0 to 0 12:47:57 FLIGetFilterPos err=0 currentPosition=0 12:47:57 FLIGetStepsRemaining err=0 RemainingSteps=0 12:47:57 Filter is already there-color wheel unchanged 12:47:57 Received message from Master: op=Shutter serial=106397 12:47:57 Shutter LASER open 12:47:58 Received message from Camera: op=State serial=106399 12:47:58 GetSingleValue result=40 Value=cccccccc 12:47:58 SkyScan query 12:47:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:47:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:58 Parameters OK 12:47:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:58 Set A/D data flow result=40 12:47:58 Set A/D channel type result=40 12:47:58 Set A/D encoding result=40 12:47:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:58 Set channel filter=0.000000e+000 result=40 12:47:58 Config A/D Result=40 12:47:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:58 Get A/D filter: -9.255963e+061 result=40 12:47:58 Get A/D value=-858993460 result=40 12:47:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:58 Parameters OK 12:47:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:58 Set A/D data flow result=40 12:47:58 Set A/D channel type result=40 12:47:58 Set A/D encoding result=40 12:47:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:58 Set channel filter=0.000000e+000 result=40 12:47:58 Config A/D Result=40 12:47:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:58 Get A/D filter: -9.255963e+061 result=40 12:47:58 Get A/D value=-858993460 result=40 12:47:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:47:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:47:58 Aux= 12:47:58 Message to Camera, serial 106399 queued 12:48:07 Received message from Master: op=Shutter serial=106409 12:48:07 Shutter LASER close 12:48:07 Received message from Master: op=PointingHead serial=106413 12:48:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:48:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:48:07 Point started: ret=0 12:48:07 point_skyscan result=0 12:48:08 Check angles 12:48:08 SkyScan query 12:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.04<-21536 Statuses=0008 0009 12:48:09 Msec=0 True Az=112.995 Ze=-143.04 Az status=0008 Ze status=0009 12:48:09 Check angles 12:48:09 SkyScan query 12:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.62<-20108 Statuses=0008 0009 12:48:09 Msec=750 True Az=112.995 Ze=-121.62 Az status=0008 Ze status=0009 12:48:10 Check angles 12:48:10 SkyScan query 12:48:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.68<-18712 Statuses=0008 0009 12:48:10 Msec=1500 True Az=112.995 Ze=-100.68 Az status=0008 Ze status=0009 12:48:10 Check angles 12:48:10 SkyScan query 12:48:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.695<-17313 Statuses=0008 0009 12:48:11 Msec=2250 True Az=112.995 Ze=-79.695 Az status=0008 Ze status=0009 12:48:11 Check angles 12:48:11 SkyScan query 12:48:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.275<-15885 Statuses=0008 0009 12:48:12 Msec=3000 True Az=112.995 Ze=-58.275 Az status=0008 Ze status=0009 12:48:12 Check angles 12:48:12 SkyScan query 12:48:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.975<-14465 Statuses=0008 0009 12:48:12 Msec=3750 True Az=112.995 Ze=-36.975 Az status=0008 Ze status=0009 12:48:13 Check angles 12:48:13 SkyScan query 12:48:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.99<-13066 Statuses=0008 0009 12:48:13 Msec=4500 True Az=112.995 Ze=-15.99 Az status=0008 Ze status=0009 12:48:13 Check angles 12:48:13 SkyScan query 12:48:14 SkyScan query done: ret=0 az=112.995<-7533 ze=5.1<-11660 Statuses=0008 0009 12:48:14 Msec=5250 True Az=112.995 Ze=5.1 Az status=0008 Ze status=0009 12:48:14 Check angles 12:48:14 SkyScan query 12:48:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:48:15 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:48:15 Message to Master queued w/err=0: serial=106413 error=0 12:48:20 Received message from Master: op=Filter serial=106414 12:48:20 Color wheel filter change from 0 to 0 12:48:20 FLIGetFilterPos err=0 currentPosition=0 12:48:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:48:20 Filter is already there-color wheel unchanged 12:48:20 Received message from Master: op=Shutter serial=106415 12:48:20 Shutter LASER close 12:48:20 Received message from Camera: op=State serial=106417 12:48:20 GetSingleValue result=40 Value=cccccccc 12:48:20 SkyScan query 12:48:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:48:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:21 Parameters OK 12:48:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:21 Set A/D data flow result=40 12:48:21 Set A/D channel type result=40 12:48:21 Set A/D encoding result=40 12:48:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:21 Set channel filter=0.000000e+000 result=40 12:48:21 Config A/D Result=40 12:48:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:21 Get A/D filter: -9.255963e+061 result=40 12:48:21 Get A/D value=-858993460 result=40 12:48:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:21 Parameters OK 12:48:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:21 Set A/D data flow result=40 12:48:21 Set A/D channel type result=40 12:48:21 Set A/D encoding result=40 12:48:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:21 Set channel filter=0.000000e+000 result=40 12:48:21 Config A/D Result=40 12:48:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:21 Get A/D filter: -9.255963e+061 result=40 12:48:21 Get A/D value=-858993460 result=40 12:48:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:48:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:48:21 Aux= 12:48:21 Message to Camera, serial 106417 queued 12:48:57 Received message from Master: op=PointingHead serial=106430 12:48:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:48:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:48:58 Point started: ret=0 12:48:58 point_skyscan result=0 12:48:59 Check angles 12:48:59 SkyScan query 12:48:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:48:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:48:59 Message to Master queued w/err=0: serial=106430 error=0 12:49:04 Received message from Master: op=Filter serial=106431 12:49:04 Color wheel filter change from 0 to 0 12:49:04 FLIGetFilterPos err=0 currentPosition=0 12:49:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:49:04 Filter is already there-color wheel unchanged 12:49:04 Received message from Master: op=Shutter serial=106432 12:49:04 Shutter LASER close 12:49:04 Received message from Camera: op=State serial=106434 12:49:04 GetSingleValue result=40 Value=cccccccc 12:49:04 SkyScan query 12:49:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:49:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:05 Parameters OK 12:49:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:05 Set A/D data flow result=40 12:49:05 Set A/D channel type result=40 12:49:05 Set A/D encoding result=40 12:49:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:05 Set channel filter=0.000000e+000 result=40 12:49:05 Config A/D Result=40 12:49:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:05 Get A/D filter: -9.255963e+061 result=40 12:49:05 Get A/D value=-858993460 result=40 12:49:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:05 Parameters OK 12:49:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:05 Set A/D data flow result=40 12:49:05 Set A/D channel type result=40 12:49:05 Set A/D encoding result=40 12:49:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:05 Set channel filter=0.000000e+000 result=40 12:49:05 Config A/D Result=40 12:49:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:05 Get A/D filter: -9.255963e+061 result=40 12:49:05 Get A/D value=-858993460 result=40 12:49:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:49:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:49:05 Aux= 12:49:05 Message to Camera, serial 106434 queued 12:49:42 Received message from Master: op=PointingHead serial=106447 12:49:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:49:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:49:42 Point started: ret=0 12:49:42 point_skyscan result=0 12:49:43 Check angles 12:49:43 SkyScan query 12:49:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:49:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:49:43 Message to Master queued w/err=0: serial=106447 error=0 12:49:48 Received message from Master: op=Filter serial=106448 12:49:48 Color wheel filter change from 0 to 0 12:49:48 FLIGetFilterPos err=0 currentPosition=0 12:49:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:49:48 Filter is already there-color wheel unchanged 12:49:49 Received message from Master: op=Shutter serial=106449 12:49:49 Shutter LASER close 12:49:49 Received message from Camera: op=State serial=106451 12:49:49 GetSingleValue result=40 Value=cccccccc 12:49:49 SkyScan query 12:49:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:49:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:49 Parameters OK 12:49:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:49 Set A/D data flow result=40 12:49:49 Set A/D channel type result=40 12:49:49 Set A/D encoding result=40 12:49:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:49 Set channel filter=0.000000e+000 result=40 12:49:49 Config A/D Result=40 12:49:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:49 Get A/D filter: -9.255963e+061 result=40 12:49:49 Get A/D value=-858993460 result=40 12:49:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:49 Parameters OK 12:49:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:49 Set A/D data flow result=40 12:49:49 Set A/D channel type result=40 12:49:49 Set A/D encoding result=40 12:49:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:49 Set channel filter=0.000000e+000 result=40 12:49:49 Config A/D Result=40 12:49:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:49 Get A/D filter: -9.255963e+061 result=40 12:49:49 Get A/D value=-858993460 result=40 12:49:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:49:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:49:49 Aux= 12:49:49 Message to Camera, serial 106451 queued 12:50:26 Received message from Master: op=PointingHead serial=106464 12:50:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:50:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:50:26 Point started: ret=0 12:50:26 point_skyscan result=0 12:50:27 Check angles 12:50:27 SkyScan query 12:50:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:50:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:50:28 Message to Master queued w/err=0: serial=106464 error=0 12:50:33 Received message from Master: op=Filter serial=106465 12:50:33 Color wheel filter change from 0 to 0 12:50:33 FLIGetFilterPos err=0 currentPosition=0 12:50:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:50:33 Filter is already there-color wheel unchanged 12:50:33 Received message from Master: op=Shutter serial=106466 12:50:33 Shutter LASER close 12:50:33 Received message from Camera: op=State serial=106468 12:50:33 GetSingleValue result=40 Value=cccccccc 12:50:33 SkyScan query 12:50:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:50:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:34 Parameters OK 12:50:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:34 Set A/D data flow result=40 12:50:34 Set A/D channel type result=40 12:50:34 Set A/D encoding result=40 12:50:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:34 Set channel filter=0.000000e+000 result=40 12:50:34 Config A/D Result=40 12:50:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:34 Get A/D filter: -9.255963e+061 result=40 12:50:34 Get A/D value=-858993460 result=40 12:50:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:34 Parameters OK 12:50:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:34 Set A/D data flow result=40 12:50:34 Set A/D channel type result=40 12:50:34 Set A/D encoding result=40 12:50:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:34 Set channel filter=0.000000e+000 result=40 12:50:34 Config A/D Result=40 12:50:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:34 Get A/D filter: -9.255963e+061 result=40 12:50:34 Get A/D value=-858993460 result=40 12:50:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:50:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:50:34 Aux= 12:50:34 Message to Camera, serial 106468 queued 12:51:09 Received message from Master: op=PointingHead serial=106480 12:51:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:51:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:51:10 Point started: ret=0 12:51:10 point_skyscan result=0 12:51:11 Check angles 12:51:11 SkyScan query 12:51:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 12:51:11 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 12:51:11 Check angles 12:51:11 SkyScan query 12:51:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 12:51:12 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 12:51:12 Check angles 12:51:12 SkyScan query 12:51:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.95<-16330 Statuses=0008 0009 12:51:13 Msec=1500 True Az=112.995 Ze=-64.95 Az status=0008 Ze status=0009 12:51:13 Check angles 12:51:13 SkyScan query 12:51:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.905<-17727 Statuses=0008 0009 12:51:13 Msec=2250 True Az=112.995 Ze=-85.905 Az status=0008 Ze status=0009 12:51:14 Check angles 12:51:14 SkyScan query 12:51:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.83<-19122 Statuses=0008 0009 12:51:14 Msec=3000 True Az=112.995 Ze=-106.83 Az status=0008 Ze status=0009 12:51:14 Check angles 12:51:14 SkyScan query 12:51:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.8<-20520 Statuses=0008 0009 12:51:15 Msec=3750 True Az=112.995 Ze=-127.8 Az status=0008 Ze status=0009 12:51:15 Check angles 12:51:15 SkyScan query 12:51:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.725<-21915 Statuses=0008 0009 12:51:16 Msec=4500 True Az=112.995 Ze=-148.725 Az status=0008 Ze status=0009 12:51:16 Check angles 12:51:16 SkyScan query 12:51:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.68<-23312 Statuses=0008 0009 12:51:16 Msec=5250 True Az=112.995 Ze=-169.68 Az status=0008 Ze status=0009 12:51:17 Check angles 12:51:17 SkyScan query 12:51:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:51:17 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:51:17 Message to Master queued w/err=0: serial=106480 error=0 12:51:22 Received message from Master: op=Filter serial=106481 12:51:22 Color wheel filter change from 0 to 0 12:51:22 FLIGetFilterPos err=0 currentPosition=0 12:51:22 FLIGetStepsRemaining err=0 RemainingSteps=0 12:51:22 Filter is already there-color wheel unchanged 12:51:22 Received message from Master: op=Shutter serial=106482 12:51:22 Shutter LASER open 12:51:23 Received message from Camera: op=State serial=106484 12:51:23 GetSingleValue result=40 Value=cccccccc 12:51:23 SkyScan query 12:51:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:51:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:23 Parameters OK 12:51:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:23 Set A/D data flow result=40 12:51:23 Set A/D channel type result=40 12:51:23 Set A/D encoding result=40 12:51:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:23 Set channel filter=0.000000e+000 result=40 12:51:23 Config A/D Result=40 12:51:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:23 Get A/D filter: -9.255963e+061 result=40 12:51:23 Get A/D value=-858993460 result=40 12:51:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:23 Parameters OK 12:51:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:23 Set A/D data flow result=40 12:51:23 Set A/D channel type result=40 12:51:23 Set A/D encoding result=40 12:51:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:23 Set channel filter=0.000000e+000 result=40 12:51:23 Config A/D Result=40 12:51:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:23 Get A/D filter: -9.255963e+061 result=40 12:51:23 Get A/D value=-858993460 result=40 12:51:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:51:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:51:23 Aux= 12:51:23 Message to Camera, serial 106484 queued 12:51:32 Received message from Master: op=Shutter serial=106494 12:51:32 Shutter LASER close 12:51:32 Received message from Master: op=PointingHead serial=106498 12:51:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:51:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:51:32 Point started: ret=0 12:51:32 point_skyscan result=0 12:51:33 Check angles 12:51:33 SkyScan query 12:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.89<-21526 Statuses=0008 0009 12:51:34 Msec=0 True Az=112.995 Ze=-142.89 Az status=0008 Ze status=0009 12:51:34 Check angles 12:51:34 SkyScan query 12:51:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.47<-20098 Statuses=0008 0009 12:51:35 Msec=750 True Az=112.995 Ze=-121.47 Az status=0008 Ze status=0009 12:51:35 Check angles 12:51:35 SkyScan query 12:51:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.5<-18700 Statuses=0008 0009 12:51:35 Msec=1500 True Az=112.995 Ze=-100.5 Az status=0008 Ze status=0009 12:51:35 Check angles 12:51:35 SkyScan query 12:51:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.545<-17303 Statuses=0008 0009 12:51:36 Msec=2250 True Az=112.995 Ze=-79.545 Az status=0008 Ze status=0009 12:51:36 Check angles 12:51:36 SkyScan query 12:51:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.59<-15906 Statuses=0008 0009 12:51:37 Msec=3000 True Az=112.995 Ze=-58.59 Az status=0008 Ze status=0009 12:51:37 Check angles 12:51:37 SkyScan query 12:51:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.635<-14509 Statuses=0008 0009 12:51:38 Msec=3750 True Az=112.995 Ze=-37.635 Az status=0008 Ze status=0009 12:51:38 Check angles 12:51:38 SkyScan query 12:51:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.68<-13112 Statuses=0008 0009 12:51:38 Msec=4500 True Az=112.995 Ze=-16.68 Az status=0008 Ze status=0009 12:51:38 Check angles 12:51:38 SkyScan query 12:51:39 SkyScan query done: ret=0 az=113.01<-7534 ze=4.2<-11720 Statuses=0008 0009 12:51:39 Msec=5250 True Az=113.01 Ze=4.2 Az status=0008 Ze status=0009 12:51:39 Check angles 12:51:39 SkyScan query 12:51:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:51:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:51:40 Message to Master queued w/err=0: serial=106498 error=0 12:51:45 Received message from Master: op=Filter serial=106499 12:51:45 Color wheel filter change from 0 to 0 12:51:45 FLIGetFilterPos err=0 currentPosition=0 12:51:45 FLIGetStepsRemaining err=0 RemainingSteps=0 12:51:45 Filter is already there-color wheel unchanged 12:51:45 Received message from Master: op=Shutter serial=106500 12:51:45 Shutter LASER close 12:51:45 Received message from Camera: op=State serial=106502 12:51:45 GetSingleValue result=40 Value=cccccccc 12:51:45 SkyScan query 12:51:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:51:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:46 Parameters OK 12:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:46 Set A/D data flow result=40 12:51:46 Set A/D channel type result=40 12:51:46 Set A/D encoding result=40 12:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:46 Set channel filter=0.000000e+000 result=40 12:51:46 Config A/D Result=40 12:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:46 Get A/D filter: -9.255963e+061 result=40 12:51:46 Get A/D value=-858993460 result=40 12:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:46 Parameters OK 12:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:46 Set A/D data flow result=40 12:51:46 Set A/D channel type result=40 12:51:46 Set A/D encoding result=40 12:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:46 Set channel filter=0.000000e+000 result=40 12:51:46 Config A/D Result=40 12:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:46 Get A/D filter: -9.255963e+061 result=40 12:51:46 Get A/D value=-858993460 result=40 12:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:51:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:51:46 Aux= 12:51:46 Message to Camera, serial 106502 queued 12:52:23 Received message from Master: op=PointingHead serial=106515 12:52:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:52:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:52:23 Point started: ret=0 12:52:23 point_skyscan result=0 12:52:24 Check angles 12:52:24 SkyScan query 12:52:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:52:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:52:24 Message to Master queued w/err=0: serial=106515 error=0 12:52:29 Received message from Master: op=Filter serial=106516 12:52:29 Color wheel filter change from 0 to 0 12:52:29 FLIGetFilterPos err=0 currentPosition=0 12:52:29 FLIGetStepsRemaining err=0 RemainingSteps=0 12:52:29 Filter is already there-color wheel unchanged 12:52:29 Received message from Master: op=Shutter serial=106517 12:52:29 Shutter LASER close 12:52:29 Received message from Camera: op=State serial=106519 12:52:29 GetSingleValue result=40 Value=cccccccc 12:52:29 SkyScan query 12:52:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:52:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:30 Parameters OK 12:52:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:30 Set A/D data flow result=40 12:52:30 Set A/D channel type result=40 12:52:30 Set A/D encoding result=40 12:52:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:30 Set channel filter=0.000000e+000 result=40 12:52:30 Config A/D Result=40 12:52:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:30 Get A/D filter: -9.255963e+061 result=40 12:52:30 Get A/D value=-858993460 result=40 12:52:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:30 Parameters OK 12:52:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:30 Set A/D data flow result=40 12:52:30 Set A/D channel type result=40 12:52:30 Set A/D encoding result=40 12:52:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:30 Set channel filter=0.000000e+000 result=40 12:52:30 Config A/D Result=40 12:52:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:30 Get A/D filter: -9.255963e+061 result=40 12:52:30 Get A/D value=-858993460 result=40 12:52:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:52:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:52:30 Aux= 12:52:30 Message to Camera, serial 106519 queued 12:53:07 Received message from Master: op=PointingHead serial=106532 12:53:07 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:53:07 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:53:07 Point started: ret=0 12:53:07 point_skyscan result=0 12:53:08 Check angles 12:53:08 SkyScan query 12:53:09 SkyScan query done: ret=0 az=136.38<-9092 ze=-6.51<-12434 Statuses=0009 0008 12:53:09 Msec=0 True Az=136.38 Ze=-6.51 Az status=0009 Ze status=0008 12:53:09 Check angles 12:53:09 SkyScan query 12:53:09 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.51<-12434 Statuses=0009 0008 12:53:09 Msec=750 True Az=153.93 Ze=-6.51 Az status=0009 Ze status=0008 12:53:09 Check angles 12:53:09 SkyScan query 12:53:10 SkyScan query done: ret=0 az=171.36<-11424 ze=-6.495<-12433 Statuses=0009 0008 12:53:10 Msec=1500 True Az=171.36 Ze=-6.495 Az status=0009 Ze status=0008 12:53:10 Check angles 12:53:10 SkyScan query 12:53:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:53:11 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 12:53:11 Message to Master queued w/err=0: serial=106532 error=0 12:53:16 Received message from Master: op=Filter serial=106533 12:53:16 Color wheel filter change from 0 to 0 12:53:16 FLIGetFilterPos err=0 currentPosition=0 12:53:16 FLIGetStepsRemaining err=0 RemainingSteps=0 12:53:16 Filter is already there-color wheel unchanged 12:53:16 Received message from Master: op=Shutter serial=106534 12:53:16 Shutter LASER close 12:53:16 Received message from Camera: op=State serial=106536 12:53:16 GetSingleValue result=40 Value=cccccccc 12:53:16 SkyScan query 12:53:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:53:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:17 Parameters OK 12:53:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:17 Set A/D data flow result=40 12:53:17 Set A/D channel type result=40 12:53:17 Set A/D encoding result=40 12:53:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:17 Set channel filter=0.000000e+000 result=40 12:53:17 Config A/D Result=40 12:53:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:17 Get A/D filter: -9.255963e+061 result=40 12:53:17 Get A/D value=-858993460 result=40 12:53:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:17 Parameters OK 12:53:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:17 Set A/D data flow result=40 12:53:17 Set A/D channel type result=40 12:53:17 Set A/D encoding result=40 12:53:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:17 Set channel filter=0.000000e+000 result=40 12:53:17 Config A/D Result=40 12:53:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:17 Get A/D filter: -9.255963e+061 result=40 12:53:17 Get A/D value=-858993460 result=40 12:53:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:53:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:53:17 Aux= 12:53:17 Message to Camera, serial 106536 queued 12:53:53 Received message from Master: op=PointingHead serial=106549 12:53:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:53:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:53:54 Point started: ret=0 12:53:54 point_skyscan result=0 12:53:55 Check angles 12:53:55 SkyScan query 12:53:55 SkyScan query done: ret=0 az=153.135<-10209 ze=6.51<-11566 Statuses=0009 0008 12:53:55 Msec=0 True Az=153.135 Ze=6.51 Az status=0009 Ze status=0008 12:53:55 Check angles 12:53:55 SkyScan query 12:53:56 SkyScan query done: ret=0 az=135.165<-9011 ze=6.495<-11567 Statuses=0009 0008 12:53:56 Msec=750 True Az=135.165 Ze=6.495 Az status=0009 Ze status=0008 12:53:56 Check angles 12:53:56 SkyScan query 12:53:57 SkyScan query done: ret=0 az=117.42<-7828 ze=6.495<-11567 Statuses=0009 0008 12:53:57 Msec=1500 True Az=117.42 Ze=6.495 Az status=0009 Ze status=0008 12:53:57 Check angles 12:53:57 SkyScan query 12:53:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:53:57 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:53:57 Message to Master queued w/err=0: serial=106549 error=0 12:54:02 Received message from Master: op=Filter serial=106550 12:54:02 Color wheel filter change from 0 to 0 12:54:02 FLIGetFilterPos err=0 currentPosition=0 12:54:02 FLIGetStepsRemaining err=0 RemainingSteps=0 12:54:02 Filter is already there-color wheel unchanged 12:54:03 Received message from Master: op=Shutter serial=106551 12:54:03 Shutter LASER close 12:54:03 Received message from Camera: op=State serial=106553 12:54:03 GetSingleValue result=40 Value=cccccccc 12:54:03 SkyScan query 12:54:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:54:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:03 Parameters OK 12:54:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:03 Set A/D data flow result=40 12:54:03 Set A/D channel type result=40 12:54:03 Set A/D encoding result=40 12:54:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:03 Set channel filter=0.000000e+000 result=40 12:54:03 Config A/D Result=40 12:54:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:03 Get A/D filter: -9.255963e+061 result=40 12:54:03 Get A/D value=-858993460 result=40 12:54:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:03 Parameters OK 12:54:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:03 Set A/D data flow result=40 12:54:03 Set A/D channel type result=40 [UTC 2019-3-4 12:54:03] 12:54:03 Set A/D encoding result=40 12:54:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:03 Set channel filter=0.000000e+000 result=40 12:54:03 Config A/D Result=40 12:54:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:03 Get A/D filter: -9.255963e+061 result=40 12:54:03 Get A/D value=-858993460 result=40 12:54:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:54:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:54:03 Aux= 12:54:03 Message to Camera, serial 106553 queued 12:54:40 Received message from Master: op=PointingHead serial=106566 12:54:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:54:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:54:40 Point started: ret=0 12:54:40 point_skyscan result=0 12:54:41 Check angles 12:54:41 SkyScan query 12:54:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 12:54:42 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 12:54:42 Check angles 12:54:42 SkyScan query 12:54:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 12:54:42 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 12:54:43 Check angles 12:54:43 SkyScan query 12:54:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.95<-16330 Statuses=0008 0009 12:54:43 Msec=1500 True Az=112.995 Ze=-64.95 Az status=0008 Ze status=0009 12:54:43 Check angles 12:54:43 SkyScan query 12:54:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.905<-17727 Statuses=0008 0009 12:54:44 Msec=2250 True Az=112.995 Ze=-85.905 Az status=0008 Ze status=0009 12:54:44 Check angles 12:54:44 SkyScan query 12:54:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.8<-19120 Statuses=0008 0009 12:54:45 Msec=3000 True Az=112.995 Ze=-106.8 Az status=0008 Ze status=0009 12:54:45 Check angles 12:54:45 SkyScan query 12:54:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.785<-20519 Statuses=0008 0009 12:54:45 Msec=3750 True Az=112.995 Ze=-127.785 Az status=0008 Ze status=0009 12:54:46 Check angles 12:54:46 SkyScan query 12:54:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.725<-21915 Statuses=0008 0009 12:54:46 Msec=4500 True Az=112.995 Ze=-148.725 Az status=0008 Ze status=0009 12:54:46 Check angles 12:54:46 SkyScan query 12:54:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.665<-23311 Statuses=0008 0009 12:54:47 Msec=5250 True Az=112.995 Ze=-169.665 Az status=0008 Ze status=0009 12:54:47 Check angles 12:54:47 SkyScan query 12:54:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:54:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:54:48 Message to Master queued w/err=0: serial=106566 error=0 12:54:53 Received message from Master: op=Filter serial=106567 12:54:53 Color wheel filter change from 0 to 0 12:54:53 FLIGetFilterPos err=0 currentPosition=0 12:54:53 FLIGetStepsRemaining err=0 RemainingSteps=0 12:54:53 Filter is already there-color wheel unchanged 12:54:53 Received message from Master: op=Shutter serial=106568 12:54:53 Shutter LASER open 12:54:53 Received message from Camera: op=State serial=106570 12:54:53 GetSingleValue result=40 Value=cccccccc 12:54:53 SkyScan query 12:54:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:54:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:54 Parameters OK 12:54:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:54 Set A/D data flow result=40 12:54:54 Set A/D channel type result=40 12:54:54 Set A/D encoding result=40 12:54:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:54 Set channel filter=0.000000e+000 result=40 12:54:54 Config A/D Result=40 12:54:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:54 Get A/D filter: -9.255963e+061 result=40 12:54:54 Get A/D value=-858993460 result=40 12:54:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:54 Parameters OK 12:54:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:54 Set A/D data flow result=40 12:54:54 Set A/D channel type result=40 12:54:54 Set A/D encoding result=40 12:54:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:54 Set channel filter=0.000000e+000 result=40 12:54:54 Config A/D Result=40 12:54:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:54 Get A/D filter: -9.255963e+061 result=40 12:54:54 Get A/D value=-858993460 result=40 12:54:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:54:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:54:54 Aux= 12:54:54 Message to Camera, serial 106570 queued 12:55:02 Received message from Master: op=Shutter serial=106580 12:55:02 Shutter LASER close 12:55:02 Received message from Master: op=PointingHead serial=106584 12:55:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:55:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:55:03 Point started: ret=0 12:55:03 point_skyscan result=0 12:55:04 Check angles 12:55:04 SkyScan query 12:55:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 12:55:04 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 12:55:04 Check angles 12:55:04 SkyScan query 12:55:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.34<-20156 Statuses=0008 0009 12:55:05 Msec=750 True Az=112.995 Ze=-122.34 Az status=0008 Ze status=0009 12:55:05 Check angles 12:55:05 SkyScan query 12:55:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.415<-18761 Statuses=0008 0009 12:55:06 Msec=1500 True Az=112.995 Ze=-101.415 Az status=0008 Ze status=0009 12:55:06 Check angles 12:55:06 SkyScan query 12:55:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.445<-17363 Statuses=0008 0009 12:55:06 Msec=2250 True Az=112.995 Ze=-80.445 Az status=0008 Ze status=0009 12:55:07 Check angles 12:55:07 SkyScan query 12:55:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.49<-15966 Statuses=0008 0009 12:55:07 Msec=3000 True Az=112.995 Ze=-59.49 Az status=0008 Ze status=0009 12:55:07 Check angles 12:55:07 SkyScan query 12:55:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.505<-14567 Statuses=0008 0009 12:55:08 Msec=3750 True Az=112.995 Ze=-38.505 Az status=0008 Ze status=0009 12:55:08 Check angles 12:55:08 SkyScan query 12:55:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.085<-13139 Statuses=0008 0009 12:55:09 Msec=4500 True Az=112.995 Ze=-17.085 Az status=0008 Ze status=0009 12:55:09 Check angles 12:55:09 SkyScan query 12:55:09 SkyScan query done: ret=0 az=112.995<-7533 ze=3.885<-11741 Statuses=0008 0009 12:55:09 Msec=5250 True Az=112.995 Ze=3.885 Az status=0008 Ze status=0009 12:55:10 Check angles 12:55:10 SkyScan query 12:55:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:55:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:55:10 Message to Master queued w/err=0: serial=106584 error=0 12:55:15 Received message from Master: op=Filter serial=106585 12:55:15 Color wheel filter change from 0 to 0 12:55:15 FLIGetFilterPos err=0 currentPosition=0 12:55:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:55:15 Filter is already there-color wheel unchanged 12:55:15 Received message from Master: op=Shutter serial=106586 12:55:15 Shutter LASER close 12:55:16 Received message from Camera: op=State serial=106588 12:55:16 GetSingleValue result=40 Value=cccccccc 12:55:16 SkyScan query 12:55:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:55:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:16 Parameters OK 12:55:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:16 Set A/D data flow result=40 12:55:16 Set A/D channel type result=40 12:55:16 Set A/D encoding result=40 12:55:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:16 Set channel filter=0.000000e+000 result=40 12:55:16 Config A/D Result=40 12:55:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:16 Get A/D filter: -9.255963e+061 result=40 12:55:16 Get A/D value=-858993460 result=40 12:55:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:16 Parameters OK 12:55:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:16 Set A/D data flow result=40 12:55:16 Set A/D channel type result=40 12:55:16 Set A/D encoding result=40 12:55:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:16 Set channel filter=0.000000e+000 result=40 12:55:16 Config A/D Result=40 12:55:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:16 Get A/D filter: -9.255963e+061 result=40 12:55:16 Get A/D value=-858993460 result=40 12:55:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:55:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:55:16 Aux= 12:55:16 Message to Camera, serial 106588 queued 12:55:53 Received message from Master: op=PointingHead serial=106601 12:55:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:55:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:55:53 Point started: ret=0 12:55:53 point_skyscan result=0 12:55:54 Check angles 12:55:54 SkyScan query 12:55:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:55:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:55:55 Message to Master queued w/err=0: serial=106601 error=0 12:56:00 Received message from Master: op=Filter serial=106602 12:56:00 Color wheel filter change from 0 to 0 12:56:00 FLIGetFilterPos err=0 currentPosition=0 12:56:00 FLIGetStepsRemaining err=0 RemainingSteps=0 12:56:00 Filter is already there-color wheel unchanged 12:56:00 Received message from Master: op=Shutter serial=106603 12:56:00 Shutter LASER close 12:56:00 Received message from Camera: op=State serial=106605 12:56:00 GetSingleValue result=40 Value=cccccccc 12:56:00 SkyScan query 12:56:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:56:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:00 Parameters OK 12:56:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:00 Set A/D data flow result=40 12:56:00 Set A/D channel type result=40 12:56:00 Set A/D encoding result=40 12:56:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:00 Set channel filter=0.000000e+000 result=40 12:56:00 Config A/D Result=40 12:56:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:00 Get A/D filter: -9.255963e+061 result=40 12:56:00 Get A/D value=-858993460 result=40 12:56:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:00 Parameters OK 12:56:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:00 Set A/D data flow result=40 12:56:00 Set A/D channel type result=40 12:56:00 Set A/D encoding result=40 12:56:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:00 Set channel filter=0.000000e+000 result=40 12:56:00 Config A/D Result=40 12:56:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:00 Get A/D filter: -9.255963e+061 result=40 12:56:00 Get A/D value=-858993460 result=40 12:56:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:56:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:56:00 Aux= 12:56:00 Message to Camera, serial 106605 queued 12:56:37 Received message from Master: op=PointingHead serial=106618 12:56:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:56:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:56:38 Point started: ret=0 12:56:38 point_skyscan result=0 12:56:38 Check angles 12:56:38 SkyScan query 12:56:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:56:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:56:39 Message to Master queued w/err=0: serial=106618 error=0 12:56:44 Received message from Master: op=Filter serial=106619 12:56:44 Color wheel filter change from 0 to 0 12:56:44 FLIGetFilterPos err=0 currentPosition=0 12:56:44 FLIGetStepsRemaining err=0 RemainingSteps=0 12:56:44 Filter is already there-color wheel unchanged 12:56:44 Received message from Master: op=Shutter serial=106620 12:56:44 Shutter LASER close 12:56:44 Received message from Camera: op=State serial=106622 12:56:44 GetSingleValue result=40 Value=cccccccc 12:56:44 SkyScan query 12:56:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:56:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:45 Parameters OK 12:56:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:45 Set A/D data flow result=40 12:56:45 Set A/D channel type result=40 12:56:45 Set A/D encoding result=40 12:56:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:45 Set channel filter=0.000000e+000 result=40 12:56:45 Config A/D Result=40 12:56:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:45 Get A/D filter: -9.255963e+061 result=40 12:56:45 Get A/D value=-858993460 result=40 12:56:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:45 Parameters OK 12:56:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:45 Set A/D data flow result=40 12:56:45 Set A/D channel type result=40 12:56:45 Set A/D encoding result=40 12:56:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:45 Set channel filter=0.000000e+000 result=40 12:56:45 Config A/D Result=40 12:56:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:45 Get A/D filter: -9.255963e+061 result=40 12:56:45 Get A/D value=-858993460 result=40 12:56:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:56:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:56:45 Aux= 12:56:45 Message to Camera, serial 106622 queued 12:57:22 Received message from Master: op=PointingHead serial=106635 12:57:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:57:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:57:22 Point started: ret=0 12:57:22 point_skyscan result=0 12:57:23 Check angles 12:57:23 SkyScan query 12:57:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:57:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:57:23 Message to Master queued w/err=0: serial=106635 error=0 12:57:28 Received message from Master: op=Filter serial=106636 12:57:28 Color wheel filter change from 0 to 0 12:57:28 FLIGetFilterPos err=0 currentPosition=0 12:57:28 FLIGetStepsRemaining err=0 RemainingSteps=0 12:57:28 Filter is already there-color wheel unchanged 12:57:28 Received message from Master: op=Shutter serial=106637 12:57:28 Shutter LASER close 12:57:28 Received message from Camera: op=State serial=106639 12:57:28 GetSingleValue result=40 Value=cccccccc 12:57:28 SkyScan query 12:57:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:57:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:29 Parameters OK 12:57:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:29 Set A/D data flow result=40 12:57:29 Set A/D channel type result=40 12:57:29 Set A/D encoding result=40 12:57:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:29 Set channel filter=0.000000e+000 result=40 12:57:29 Config A/D Result=40 12:57:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:29 Get A/D filter: -9.255963e+061 result=40 12:57:29 Get A/D value=-858993460 result=40 12:57:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:29 Parameters OK 12:57:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:29 Set A/D data flow result=40 12:57:29 Set A/D channel type result=40 12:57:29 Set A/D encoding result=40 12:57:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:29 Set channel filter=0.000000e+000 result=40 12:57:29 Config A/D Result=40 12:57:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:29 Get A/D filter: -9.255963e+061 result=40 12:57:29 Get A/D value=-858993460 result=40 12:57:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:57:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:57:29 Aux= 12:57:29 Message to Camera, serial 106639 queued 12:58:06 Received message from Master: op=PointingHead serial=106652 12:58:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:58:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:58:06 Point started: ret=0 12:58:06 point_skyscan result=0 12:58:07 Check angles 12:58:07 SkyScan query 12:58:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 12:58:08 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 12:58:08 Check angles 12:58:08 SkyScan query 12:58:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 12:58:08 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 12:58:08 Check angles 12:58:08 SkyScan query 12:58:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 12:58:09 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 12:58:09 Check angles 12:58:09 SkyScan query 12:58:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.67<-17778 Statuses=0008 0009 12:58:10 Msec=2250 True Az=112.995 Ze=-86.67 Az status=0008 Ze status=0009 12:58:10 Check angles 12:58:10 SkyScan query 12:58:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 12:58:11 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 12:58:11 Check angles 12:58:11 SkyScan query 12:58:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.58<-20572 Statuses=0008 0009 12:58:11 Msec=3750 True Az=112.995 Ze=-128.58 Az status=0008 Ze status=0009 12:58:11 Check angles 12:58:11 SkyScan query 12:58:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.565<-21971 Statuses=0008 0009 12:58:12 Msec=4500 True Az=112.995 Ze=-149.565 Az status=0008 Ze status=0009 12:58:12 Check angles 12:58:12 SkyScan query 12:58:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.49<-23366 Statuses=0008 0009 12:58:13 Msec=5250 True Az=112.995 Ze=-170.49 Az status=0008 Ze status=0009 12:58:13 Check angles 12:58:13 SkyScan query 12:58:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:58:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:58:14 Message to Master queued w/err=0: serial=106652 error=0 12:58:19 Received message from Master: op=Filter serial=106653 12:58:19 Color wheel filter change from 0 to 0 12:58:19 FLIGetFilterPos err=0 currentPosition=0 12:58:19 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:19 Filter is already there-color wheel unchanged 12:58:19 Received message from Master: op=Shutter serial=106654 12:58:19 Shutter LASER open 12:58:19 Received message from Camera: op=State serial=106656 12:58:19 GetSingleValue result=40 Value=cccccccc 12:58:19 SkyScan query 12:58:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:58:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:19 Parameters OK 12:58:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:19 Set A/D data flow result=40 12:58:19 Set A/D channel type result=40 12:58:19 Set A/D encoding result=40 12:58:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:19 Set channel filter=0.000000e+000 result=40 12:58:19 Config A/D Result=40 12:58:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:19 Get A/D filter: -9.255963e+061 result=40 12:58:19 Get A/D value=-858993460 result=40 12:58:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:19 Parameters OK 12:58:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:19 Set A/D data flow result=40 12:58:19 Set A/D channel type result=40 12:58:19 Set A/D encoding result=40 12:58:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:19 Set channel filter=0.000000e+000 result=40 12:58:19 Config A/D Result=40 12:58:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:19 Get A/D filter: -9.255963e+061 result=40 12:58:19 Get A/D value=-858993460 result=40 12:58:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:58:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:58:19 Aux= 12:58:19 Message to Camera, serial 106656 queued 12:58:28 Received message from Master: op=Shutter serial=106666 12:58:28 Shutter LASER close 12:58:28 Received message from Master: op=PointingHead serial=106670 12:58:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:58:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:58:29 Point started: ret=0 12:58:29 point_skyscan result=0 12:58:30 Check angles 12:58:30 SkyScan query 12:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 12:58:30 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 12:58:30 Check angles 12:58:30 SkyScan query 12:58:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.115<-20141 Statuses=0008 0009 12:58:31 Msec=750 True Az=112.995 Ze=-122.115 Az status=0008 Ze status=0009 12:58:31 Check angles 12:58:31 SkyScan query 12:58:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 12:58:32 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 12:58:32 Check angles 12:58:32 SkyScan query 12:58:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 12:58:32 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 12:58:33 Check angles 12:58:33 SkyScan query 12:58:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.28<-15952 Statuses=0008 0009 12:58:33 Msec=3000 True Az=112.995 Ze=-59.28 Az status=0008 Ze status=0009 12:58:33 Check angles 12:58:33 SkyScan query 12:58:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.265<-14551 Statuses=0008 0009 12:58:34 Msec=3750 True Az=112.995 Ze=-38.265 Az status=0008 Ze status=0009 12:58:34 Check angles 12:58:34 SkyScan query 12:58:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.34<-13156 Statuses=0008 0009 12:58:35 Msec=4500 True Az=112.995 Ze=-17.34 Az status=0008 Ze status=0009 12:58:35 Check angles 12:58:35 SkyScan query 12:58:35 SkyScan query done: ret=0 az=112.995<-7533 ze=3.645<-11757 Statuses=0008 0009 12:58:35 Msec=5250 True Az=112.995 Ze=3.645 Az status=0008 Ze status=0009 12:58:36 Check angles 12:58:36 SkyScan query 12:58:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:58:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:58:36 Message to Master queued w/err=0: serial=106670 error=0 12:58:41 Received message from Master: op=Filter serial=106671 12:58:41 Color wheel filter change from 0 to 0 12:58:41 FLIGetFilterPos err=0 currentPosition=0 12:58:41 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:41 Filter is already there-color wheel unchanged 12:58:41 Received message from Master: op=Shutter serial=106672 12:58:41 Shutter LASER close 12:58:42 Received message from Camera: op=State serial=106674 12:58:42 GetSingleValue result=40 Value=cccccccc 12:58:42 SkyScan query 12:58:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:58:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:42 Parameters OK 12:58:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:42 Set A/D data flow result=40 12:58:42 Set A/D channel type result=40 12:58:42 Set A/D encoding result=40 12:58:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:42 Set channel filter=0.000000e+000 result=40 12:58:42 Config A/D Result=40 12:58:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:42 Get A/D filter: -9.255963e+061 result=40 12:58:42 Get A/D value=-858993460 result=40 12:58:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:42 Parameters OK 12:58:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:42 Set A/D data flow result=40 12:58:42 Set A/D channel type result=40 12:58:42 Set A/D encoding result=40 12:58:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:42 Set channel filter=0.000000e+000 result=40 12:58:42 Config A/D Result=40 12:58:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:42 Get A/D filter: -9.255963e+061 result=40 12:58:42 Get A/D value=-858993460 result=40 12:58:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:58:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:58:42 Aux= 12:58:42 Message to Camera, serial 106674 queued 12:59:19 Received message from Master: op=PointingHead serial=106687 12:59:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:59:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:59:19 Point started: ret=0 12:59:19 point_skyscan result=0 12:59:20 Check angles 12:59:20 SkyScan query 12:59:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:59:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:59:21 Message to Master queued w/err=0: serial=106687 error=0 12:59:26 Received message from Master: op=Filter serial=106688 12:59:26 Color wheel filter change from 0 to 0 12:59:26 FLIGetFilterPos err=0 currentPosition=0 12:59:26 FLIGetStepsRemaining err=0 RemainingSteps=0 12:59:26 Filter is already there-color wheel unchanged 12:59:26 Received message from Master: op=Shutter serial=106689 12:59:26 Shutter LASER close 12:59:26 Received message from Camera: op=State serial=106691 12:59:26 GetSingleValue result=40 Value=cccccccc 12:59:26 SkyScan query 12:59:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:59:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:26 Parameters OK 12:59:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:26 Set A/D data flow result=40 12:59:26 Set A/D channel type result=40 12:59:26 Set A/D encoding result=40 12:59:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:26 Set channel filter=0.000000e+000 result=40 12:59:26 Config A/D Result=40 12:59:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:26 Get A/D filter: -9.255963e+061 result=40 12:59:26 Get A/D value=-858993460 result=40 12:59:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:26 Parameters OK 12:59:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:26 Set A/D data flow result=40 12:59:26 Set A/D channel type result=40 12:59:26 Set A/D encoding result=40 12:59:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:26 Set channel filter=0.000000e+000 result=40 12:59:26 Config A/D Result=40 12:59:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:26 Get A/D filter: -9.255963e+061 result=40 12:59:26 Get A/D value=-858993460 result=40 12:59:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:26 Aux= 12:59:26 Message to Camera, serial 106691 queued 13:00:03 Received message from Master: op=PointingHead serial=106704 13:00:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:00:03 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:00:04 Point started: ret=0 13:00:04 point_skyscan result=0 13:00:04 Check angles 13:00:04 SkyScan query 13:00:05 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 13:00:05 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 13:00:05 Check angles 13:00:05 SkyScan query 13:00:06 SkyScan query done: ret=0 az=153.66<-10244 ze=-6.495<-12433 Statuses=0009 0008 13:00:06 Msec=750 True Az=153.66 Ze=-6.495 Az status=0009 Ze status=0008 13:00:06 Check angles 13:00:06 SkyScan query 13:00:06 SkyScan query done: ret=0 az=171.525<-11435 ze=-6.495<-12433 Statuses=0009 0008 13:00:06 Msec=1500 True Az=171.525 Ze=-6.495 Az status=0009 Ze status=0008 13:00:07 Check angles 13:00:07 SkyScan query 13:00:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:00:07 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:00:07 Message to Master queued w/err=0: serial=106704 error=0 13:00:12 Received message from Master: op=Filter serial=106705 13:00:12 Color wheel filter change from 0 to 0 13:00:12 FLIGetFilterPos err=0 currentPosition=0 13:00:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:00:12 Filter is already there-color wheel unchanged 13:00:12 Received message from Master: op=Shutter serial=106706 13:00:12 Shutter LASER close 13:00:12 Received message from Camera: op=State serial=106708 13:00:12 GetSingleValue result=40 Value=cccccccc 13:00:12 SkyScan query 13:00:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:00:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:13 Parameters OK 13:00:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:13 Set A/D data flow result=40 13:00:13 Set A/D channel type result=40 13:00:13 Set A/D encoding result=40 13:00:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:13 Set channel filter=0.000000e+000 result=40 13:00:13 Config A/D Result=40 13:00:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:13 Get A/D filter: -9.255963e+061 result=40 13:00:13 Get A/D value=-858993460 result=40 13:00:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:13 Parameters OK 13:00:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:13 Set A/D data flow result=40 13:00:13 Set A/D channel type result=40 13:00:13 Set A/D encoding result=40 13:00:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:13 Set channel filter=0.000000e+000 result=40 13:00:13 Config A/D Result=40 13:00:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:13 Get A/D filter: -9.255963e+061 result=40 13:00:13 Get A/D value=-858993460 result=40 13:00:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:00:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:00:13 Aux= 13:00:13 Message to Camera, serial 106708 queued 13:00:50 Received message from Master: op=PointingHead serial=106721 13:00:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:00:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:00:50 Point started: ret=0 13:00:50 point_skyscan result=0 13:00:51 Check angles 13:00:51 SkyScan query 13:00:52 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 13:00:52 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 13:00:52 Check angles 13:00:52 SkyScan query 13:00:52 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 13:00:52 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 13:00:52 Check angles 13:00:52 SkyScan query 13:00:53 SkyScan query done: ret=0 az=117.72<-7848 ze=6.495<-11567 Statuses=0009 0008 13:00:53 Msec=1500 True Az=117.72 Ze=6.495 Az status=0009 Ze status=0008 13:00:53 Check angles 13:00:53 SkyScan query 13:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:00:54 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:00:54 Message to Master queued w/err=0: serial=106721 error=0 13:00:59 Received message from Master: op=Filter serial=106722 13:00:59 Color wheel filter change from 0 to 0 13:00:59 FLIGetFilterPos err=0 currentPosition=0 13:00:59 FLIGetStepsRemaining err=0 RemainingSteps=0 13:00:59 Filter is already there-color wheel unchanged 13:00:59 Received message from Master: op=Shutter serial=106723 13:00:59 Shutter LASER close 13:00:59 Received message from Camera: op=State serial=106725 13:00:59 GetSingleValue result=40 Value=cccccccc 13:00:59 SkyScan query 13:01:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:01:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:00 Parameters OK 13:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:00 Set A/D data flow result=40 13:01:00 Set A/D channel type result=40 13:01:00 Set A/D encoding result=40 13:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:00 Set channel filter=0.000000e+000 result=40 13:01:00 Config A/D Result=40 13:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:00 Get A/D filter: -9.255963e+061 result=40 13:01:00 Get A/D value=-858993460 result=40 13:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:00 Parameters OK 13:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:00 Set A/D data flow result=40 13:01:00 Set A/D channel type result=40 13:01:00 Set A/D encoding result=40 13:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:00 Set channel filter=0.000000e+000 result=40 13:01:00 Config A/D Result=40 13:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:00 Get A/D filter: -9.255963e+061 result=40 13:01:00 Get A/D value=-858993460 result=40 13:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:01:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:01:00 Aux= 13:01:00 Message to Camera, serial 106725 queued 13:01:36 Received message from Master: op=PointingHead serial=106738 13:01:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:01:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:01:37 Point started: ret=0 13:01:37 point_skyscan result=0 13:01:38 Check angles 13:01:38 SkyScan query 13:01:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.01<-13534 Statuses=0008 0009 13:01:38 Msec=0 True Az=112.995 Ze=-23.01 Az status=0008 Ze status=0009 13:01:38 Check angles 13:01:38 SkyScan query 13:01:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.37<-14958 Statuses=0008 0009 13:01:39 Msec=750 True Az=112.995 Ze=-44.37 Az status=0008 Ze status=0009 13:01:39 Check angles 13:01:39 SkyScan query 13:01:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.73<-16382 Statuses=0008 0009 13:01:40 Msec=1500 True Az=112.995 Ze=-65.73 Az status=0008 Ze status=0009 13:01:40 Check angles 13:01:40 SkyScan query 13:01:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.73<-17782 Statuses=0008 0009 13:01:40 Msec=2250 True Az=112.995 Ze=-86.73 Az status=0008 Ze status=0009 13:01:41 Check angles 13:01:41 SkyScan query 13:01:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.715<-19181 Statuses=0008 0009 13:01:41 Msec=3000 True Az=112.995 Ze=-107.715 Az status=0008 Ze status=0009 13:01:41 Check angles 13:01:41 SkyScan query 13:01:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.625<-20575 Statuses=0008 0009 13:01:42 Msec=3750 True Az=112.995 Ze=-128.625 Az status=0008 Ze status=0009 13:01:42 Check angles 13:01:42 SkyScan query 13:01:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.64<-21976 Statuses=0008 0009 13:01:43 Msec=4500 True Az=112.995 Ze=-149.64 Az status=0008 Ze status=0009 13:01:43 Check angles 13:01:43 SkyScan query 13:01:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.55<-23370 Statuses=0008 0009 13:01:43 Msec=5250 True Az=112.995 Ze=-170.55 Az status=0008 Ze status=0009 13:01:44 Check angles 13:01:44 SkyScan query 13:01:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:01:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:01:44 Message to Master queued w/err=0: serial=106738 error=0 13:01:49 Received message from Master: op=Filter serial=106739 13:01:49 Color wheel filter change from 0 to 0 13:01:49 FLIGetFilterPos err=0 currentPosition=0 13:01:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:01:49 Filter is already there-color wheel unchanged 13:01:49 Received message from Master: op=Shutter serial=106740 13:01:49 Shutter LASER open 13:01:50 Received message from Camera: op=State serial=106742 13:01:50 GetSingleValue result=40 Value=cccccccc 13:01:50 SkyScan query 13:01:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:01:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:50 Parameters OK 13:01:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:50 Set A/D data flow result=40 13:01:50 Set A/D channel type result=40 13:01:50 Set A/D encoding result=40 13:01:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:50 Set channel filter=0.000000e+000 result=40 13:01:50 Config A/D Result=40 13:01:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:50 Get A/D filter: -9.255963e+061 result=40 13:01:50 Get A/D value=-858993460 result=40 13:01:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:50 Parameters OK 13:01:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:50 Set A/D data flow result=40 13:01:50 Set A/D channel type result=40 13:01:50 Set A/D encoding result=40 13:01:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:50 Set channel filter=0.000000e+000 result=40 13:01:50 Config A/D Result=40 13:01:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:50 Get A/D filter: -9.255963e+061 result=40 13:01:50 Get A/D value=-858993460 result=40 13:01:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:01:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:01:50 Aux= 13:01:50 Message to Camera, serial 106742 queued 13:01:59 Received message from Master: op=Shutter serial=106752 13:01:59 Shutter LASER close 13:01:59 Received message from Master: op=PointingHead serial=106756 13:01:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:01:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:01:59 Point started: ret=0 13:01:59 point_skyscan result=0 13:02:00 Check angles 13:02:00 SkyScan query 13:02:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.905<-21527 Statuses=0008 0009 13:02:01 Msec=0 True Az=112.995 Ze=-142.905 Az status=0008 Ze status=0009 13:02:01 Check angles 13:02:01 SkyScan query 13:02:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.905<-20127 Statuses=0008 0009 13:02:01 Msec=750 True Az=112.995 Ze=-121.905 Az status=0008 Ze status=0009 13:02:02 Check angles 13:02:02 SkyScan query 13:02:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.995<-18733 Statuses=0008 0009 13:02:02 Msec=1500 True Az=112.995 Ze=-100.995 Az status=0008 Ze status=0009 13:02:02 Check angles 13:02:02 SkyScan query 13:02:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.515<-17301 Statuses=0008 0009 13:02:03 Msec=2250 True Az=112.995 Ze=-79.515 Az status=0008 Ze status=0009 13:02:03 Check angles 13:02:03 SkyScan query 13:02:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.125<-15875 Statuses=0008 0009 13:02:04 Msec=3000 True Az=112.995 Ze=-58.125 Az status=0008 Ze status=0009 13:02:04 Check angles 13:02:04 SkyScan query 13:02:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.245<-14483 Statuses=0008 0009 13:02:04 Msec=3750 True Az=112.995 Ze=-37.245 Az status=0008 Ze status=0009 13:02:05 Check angles 13:02:05 SkyScan query 13:02:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.825<-13055 Statuses=0008 0009 13:02:05 Msec=4500 True Az=112.995 Ze=-15.825 Az status=0008 Ze status=0009 13:02:05 Check angles 13:02:05 SkyScan query 13:02:06 SkyScan query done: ret=0 az=112.98<-7532 ze=5.205<-11653 Statuses=0008 0009 13:02:06 Msec=5250 True Az=112.98 Ze=5.205 Az status=0008 Ze status=0009 13:02:06 Check angles 13:02:06 SkyScan query 13:02:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:02:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:02:07 Message to Master queued w/err=0: serial=106756 error=0 13:02:12 Received message from Master: op=Filter serial=106757 13:02:12 Color wheel filter change from 0 to 0 13:02:12 FLIGetFilterPos err=0 currentPosition=0 13:02:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:02:12 Filter is already there-color wheel unchanged 13:02:12 Received message from Master: op=Shutter serial=106758 13:02:12 Shutter LASER close 13:02:12 Received message from Camera: op=State serial=106760 13:02:12 GetSingleValue result=40 Value=cccccccc 13:02:12 SkyScan query 13:02:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:02:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:13 Parameters OK 13:02:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:13 Set A/D data flow result=40 13:02:13 Set A/D channel type result=40 13:02:13 Set A/D encoding result=40 13:02:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:13 Set channel filter=0.000000e+000 result=40 13:02:13 Config A/D Result=40 13:02:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:13 Get A/D filter: -9.255963e+061 result=40 13:02:13 Get A/D value=-858993460 result=40 13:02:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:13 Parameters OK 13:02:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:13 Set A/D data flow result=40 13:02:13 Set A/D channel type result=40 13:02:13 Set A/D encoding result=40 13:02:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:13 Set channel filter=0.000000e+000 result=40 13:02:13 Config A/D Result=40 13:02:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:13 Get A/D filter: -9.255963e+061 result=40 13:02:13 Get A/D value=-858993460 result=40 13:02:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:02:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:02:13 Aux= 13:02:13 Message to Camera, serial 106760 queued 13:02:49 Received message from Master: op=PointingHead serial=106773 13:02:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:02:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:02:50 Point started: ret=0 13:02:50 point_skyscan result=0 13:02:51 Check angles 13:02:51 SkyScan query 13:02:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:02:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:02:51 Message to Master queued w/err=0: serial=106773 error=0 13:02:56 Received message from Master: op=Filter serial=106774 13:02:56 Color wheel filter change from 0 to 0 13:02:56 FLIGetFilterPos err=0 currentPosition=0 13:02:56 FLIGetStepsRemaining err=0 RemainingSteps=0 13:02:56 Filter is already there-color wheel unchanged 13:02:56 Received message from Master: op=Shutter serial=106775 13:02:56 Shutter LASER close 13:02:56 Received message from Camera: op=State serial=106777 13:02:56 GetSingleValue result=40 Value=cccccccc 13:02:56 SkyScan query 13:02:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:02:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:57 Parameters OK 13:02:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:57 Set A/D data flow result=40 13:02:57 Set A/D channel type result=40 13:02:57 Set A/D encoding result=40 13:02:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:57 Set channel filter=0.000000e+000 result=40 13:02:57 Config A/D Result=40 13:02:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:57 Get A/D filter: -9.255963e+061 result=40 13:02:57 Get A/D value=-858993460 result=40 13:02:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:57 Parameters OK 13:02:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:57 Set A/D data flow result=40 13:02:57 Set A/D channel type result=40 13:02:57 Set A/D encoding result=40 13:02:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:57 Set channel filter=0.000000e+000 result=40 13:02:57 Config A/D Result=40 13:02:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:57 Get A/D filter: -9.255963e+061 result=40 13:02:57 Get A/D value=-858993460 result=40 13:02:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:02:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:02:57 Aux= 13:02:57 Message to Camera, serial 106777 queued 13:03:34 Received message from Master: op=PointingHead serial=106790 13:03:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:03:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:03:34 Point started: ret=0 13:03:34 point_skyscan result=0 13:03:35 Check angles 13:03:35 SkyScan query 13:03:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:03:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:03:35 Message to Master queued w/err=0: serial=106790 error=0 13:03:38 Received message from Master: op=Identify serial=106791 13:03:40 Received message from Master: op=Filter serial=106794 13:03:40 Color wheel filter change from 0 to 0 13:03:40 FLIGetFilterPos err=0 currentPosition=0 13:03:40 FLIGetStepsRemaining err=0 RemainingSteps=0 13:03:40 Filter is already there-color wheel unchanged 13:03:41 Received message from Master: op=Shutter serial=106795 13:03:41 Shutter LASER close 13:03:41 Received message from Camera: op=State serial=106797 13:03:41 GetSingleValue result=40 Value=cccccccc 13:03:41 SkyScan query 13:03:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:03:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:41 Parameters OK 13:03:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:41 Set A/D data flow result=40 13:03:41 Set A/D channel type result=40 13:03:41 Set A/D encoding result=40 13:03:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:41 Set channel filter=0.000000e+000 result=40 13:03:41 Config A/D Result=40 13:03:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:41 Get A/D filter: -9.255963e+061 result=40 13:03:41 Get A/D value=-858993460 result=40 13:03:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:41 Parameters OK 13:03:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:41 Set A/D data flow result=40 13:03:41 Set A/D channel type result=40 13:03:41 Set A/D encoding result=40 13:03:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:41 Set channel filter=0.000000e+000 result=40 13:03:41 Config A/D Result=40 13:03:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:41 Get A/D filter: -9.255963e+061 result=40 13:03:41 Get A/D value=-858993460 result=40 13:03:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:03:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:03:41 Aux= 13:03:41 Message to Camera, serial 106797 queued [UTC 2019-3-4 13:03:50] 13:04:18 Received message from Master: op=PointingHead serial=106810 13:04:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:04:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:04:18 Point started: ret=0 13:04:18 point_skyscan result=0 13:04:19 Check angles 13:04:19 SkyScan query 13:04:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:04:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:04:20 Message to Master queued w/err=0: serial=106810 error=0 13:04:25 Received message from Master: op=Filter serial=106811 13:04:25 Color wheel filter change from 0 to 0 13:04:25 FLIGetFilterPos err=0 currentPosition=0 13:04:25 FLIGetStepsRemaining err=0 RemainingSteps=0 13:04:25 Filter is already there-color wheel unchanged 13:04:25 Received message from Master: op=Shutter serial=106812 13:04:25 Shutter LASER close 13:04:25 Received message from Camera: op=State serial=106814 13:04:25 GetSingleValue result=40 Value=cccccccc 13:04:25 SkyScan query 13:04:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:04:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:25 Parameters OK 13:04:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:25 Set A/D data flow result=40 13:04:25 Set A/D channel type result=40 13:04:25 Set A/D encoding result=40 13:04:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:25 Set channel filter=0.000000e+000 result=40 13:04:25 Config A/D Result=40 13:04:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:25 Get A/D filter: -9.255963e+061 result=40 13:04:25 Get A/D value=-858993460 result=40 13:04:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:25 Parameters OK 13:04:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:25 Set A/D data flow result=40 13:04:25 Set A/D channel type result=40 13:04:25 Set A/D encoding result=40 13:04:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:25 Set channel filter=0.000000e+000 result=40 13:04:25 Config A/D Result=40 13:04:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:25 Get A/D filter: -9.255963e+061 result=40 13:04:25 Get A/D value=-858993460 result=40 13:04:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:04:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:04:25 Aux= 13:04:25 Message to Camera, serial 106814 queued 13:05:01 Received message from Master: op=PointingHead serial=106826 13:05:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:05:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:05:02 Point started: ret=0 13:05:02 point_skyscan result=0 13:05:03 Check angles 13:05:03 SkyScan query 13:05:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 13:05:03 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 13:05:03 Check angles 13:05:03 SkyScan query 13:05:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.235<-14949 Statuses=0008 0009 13:05:04 Msec=750 True Az=112.995 Ze=-44.235 Az status=0008 Ze status=0009 13:05:04 Check angles 13:05:04 SkyScan query 13:05:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.16<-16344 Statuses=0008 0009 13:05:05 Msec=1500 True Az=112.995 Ze=-65.16 Az status=0008 Ze status=0009 13:05:05 Check angles 13:05:05 SkyScan query 13:05:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.1<-17740 Statuses=0008 0009 13:05:05 Msec=2250 True Az=112.995 Ze=-86.1 Az status=0008 Ze status=0009 13:05:06 Check angles 13:05:06 SkyScan query 13:05:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.04<-19136 Statuses=0008 0009 13:05:06 Msec=3000 True Az=112.995 Ze=-107.04 Az status=0008 Ze status=0009 13:05:06 Check angles 13:05:06 SkyScan query 13:05:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.025<-20535 Statuses=0008 0009 13:05:07 Msec=3750 True Az=112.995 Ze=-128.025 Az status=0008 Ze status=0009 13:05:07 Check angles 13:05:07 SkyScan query 13:05:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.965<-21931 Statuses=0008 0009 13:05:08 Msec=4500 True Az=112.995 Ze=-148.965 Az status=0008 Ze status=0009 13:05:08 Check angles 13:05:08 SkyScan query 13:05:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.92<-23328 Statuses=0008 0009 13:05:08 Msec=5250 True Az=112.995 Ze=-169.92 Az status=0008 Ze status=0009 13:05:09 Check angles 13:05:09 SkyScan query 13:05:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:05:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:05:09 Message to Master queued w/err=0: serial=106826 error=0 13:05:14 Received message from Master: op=Filter serial=106827 13:05:14 Color wheel filter change from 0 to 0 13:05:14 FLIGetFilterPos err=0 currentPosition=0 13:05:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:14 Filter is already there-color wheel unchanged 13:05:14 Received message from Master: op=Shutter serial=106828 13:05:14 Shutter LASER open 13:05:15 Received message from Camera: op=State serial=106830 13:05:15 GetSingleValue result=40 Value=cccccccc 13:05:15 SkyScan query 13:05:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:05:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:15 Parameters OK 13:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:15 Set A/D data flow result=40 13:05:15 Set A/D channel type result=40 13:05:15 Set A/D encoding result=40 13:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:15 Set channel filter=0.000000e+000 result=40 13:05:15 Config A/D Result=40 13:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:15 Get A/D filter: -9.255963e+061 result=40 13:05:15 Get A/D value=-858993460 result=40 13:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:15 Parameters OK 13:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:15 Set A/D data flow result=40 13:05:15 Set A/D channel type result=40 13:05:15 Set A/D encoding result=40 13:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:15 Set channel filter=0.000000e+000 result=40 13:05:15 Config A/D Result=40 13:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:15 Get A/D filter: -9.255963e+061 result=40 13:05:15 Get A/D value=-858993460 result=40 13:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:15 Aux= 13:05:15 Message to Camera, serial 106830 queued 13:05:24 Received message from Master: op=Shutter serial=106840 13:05:24 Shutter LASER close 13:05:24 Received message from Master: op=PointingHead serial=106844 13:05:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:05:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:05:24 Point started: ret=0 13:05:24 point_skyscan result=0 13:05:25 Check angles 13:05:25 SkyScan query 13:05:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 13:05:26 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 13:05:26 Check angles 13:05:26 SkyScan query 13:05:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.58<-20172 Statuses=0008 0009 13:05:26 Msec=750 True Az=112.995 Ze=-122.58 Az status=0008 Ze status=0009 13:05:27 Check angles 13:05:27 SkyScan query 13:05:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 13:05:27 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 13:05:27 Check angles 13:05:27 SkyScan query 13:05:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.74<-17316 Statuses=0008 0009 13:05:28 Msec=2250 True Az=112.995 Ze=-79.74 Az status=0008 Ze status=0009 13:05:28 Check angles 13:05:28 SkyScan query 13:05:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 13:05:29 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 13:05:29 Check angles 13:05:29 SkyScan query 13:05:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.8<-14520 Statuses=0008 0009 13:05:30 Msec=3750 True Az=112.995 Ze=-37.8 Az status=0008 Ze status=0009 13:05:30 Check angles 13:05:30 SkyScan query 13:05:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.86<-13124 Statuses=0008 0009 13:05:30 Msec=4500 True Az=112.995 Ze=-16.86 Az status=0008 Ze status=0009 13:05:30 Check angles 13:05:30 SkyScan query 13:05:31 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 13:05:31 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 13:05:31 Check angles 13:05:31 SkyScan query 13:05:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:05:32 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:05:32 Message to Master queued w/err=0: serial=106844 error=0 13:05:37 Received message from Master: op=Filter serial=106845 13:05:37 Color wheel filter change from 0 to 0 13:05:37 FLIGetFilterPos err=0 currentPosition=0 13:05:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:37 Filter is already there-color wheel unchanged 13:05:37 Received message from Master: op=Shutter serial=106846 13:05:37 Shutter LASER close 13:05:37 Received message from Camera: op=State serial=106848 13:05:37 GetSingleValue result=40 Value=cccccccc 13:05:37 SkyScan query 13:05:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:05:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:38 Parameters OK 13:05:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:38 Set A/D data flow result=40 13:05:38 Set A/D channel type result=40 13:05:38 Set A/D encoding result=40 13:05:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:38 Set channel filter=0.000000e+000 result=40 13:05:38 Config A/D Result=40 13:05:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:38 Get A/D filter: -9.255963e+061 result=40 13:05:38 Get A/D value=-858993460 result=40 13:05:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:38 Parameters OK 13:05:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:38 Set A/D data flow result=40 13:05:38 Set A/D channel type result=40 13:05:38 Set A/D encoding result=40 13:05:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:38 Set channel filter=0.000000e+000 result=40 13:05:38 Config A/D Result=40 13:05:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:38 Get A/D filter: -9.255963e+061 result=40 13:05:38 Get A/D value=-858993460 result=40 13:05:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:38 Aux= 13:05:38 Message to Camera, serial 106848 queued 13:06:15 Received message from Master: op=PointingHead serial=106861 13:06:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:06:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:06:15 Point started: ret=0 13:06:15 point_skyscan result=0 13:06:16 Check angles 13:06:16 SkyScan query 13:06:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:06:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:06:16 Message to Master queued w/err=0: serial=106861 error=0 13:06:21 Received message from Master: op=Filter serial=106862 13:06:21 Color wheel filter change from 0 to 0 13:06:21 FLIGetFilterPos err=0 currentPosition=0 13:06:21 FLIGetStepsRemaining err=0 RemainingSteps=0 13:06:21 Filter is already there-color wheel unchanged 13:06:21 Received message from Master: op=Shutter serial=106863 13:06:21 Shutter LASER close 13:06:21 Received message from Camera: op=State serial=106865 13:06:21 GetSingleValue result=40 Value=cccccccc 13:06:21 SkyScan query 13:06:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:06:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:22 Parameters OK 13:06:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:22 Set A/D data flow result=40 13:06:22 Set A/D channel type result=40 13:06:22 Set A/D encoding result=40 13:06:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:22 Set channel filter=0.000000e+000 result=40 13:06:22 Config A/D Result=40 13:06:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:22 Get A/D filter: -9.255963e+061 result=40 13:06:22 Get A/D value=-858993460 result=40 13:06:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:22 Parameters OK 13:06:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:22 Set A/D data flow result=40 13:06:22 Set A/D channel type result=40 13:06:22 Set A/D encoding result=40 13:06:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:22 Set channel filter=0.000000e+000 result=40 13:06:22 Config A/D Result=40 13:06:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:22 Get A/D filter: -9.255963e+061 result=40 13:06:22 Get A/D value=-858993460 result=40 13:06:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:06:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:06:22 Aux= 13:06:22 Message to Camera, serial 106865 queued 13:06:59 Received message from Master: op=PointingHead serial=106878 13:06:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:06:59 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:06:59 Point started: ret=0 13:06:59 point_skyscan result=0 13:07:00 Check angles 13:07:00 SkyScan query 13:07:01 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 13:07:01 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 13:07:01 Check angles 13:07:01 SkyScan query 13:07:01 SkyScan query done: ret=0 az=153.735<-10249 ze=-6.51<-12434 Statuses=0009 0008 13:07:01 Msec=750 True Az=153.735 Ze=-6.51 Az status=0009 Ze status=0008 13:07:01 Check angles 13:07:01 SkyScan query 13:07:02 SkyScan query done: ret=0 az=171.585<-11439 ze=-6.495<-12433 Statuses=0009 0008 13:07:02 Msec=1500 True Az=171.585 Ze=-6.495 Az status=0009 Ze status=0008 13:07:02 Check angles 13:07:02 SkyScan query 13:07:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:07:03 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:07:03 Message to Master queued w/err=0: serial=106878 error=0 13:07:08 Received message from Master: op=Filter serial=106879 13:07:08 Color wheel filter change from 0 to 0 13:07:08 FLIGetFilterPos err=0 currentPosition=0 13:07:08 FLIGetStepsRemaining err=0 RemainingSteps=0 13:07:08 Filter is already there-color wheel unchanged 13:07:08 Received message from Master: op=Shutter serial=106880 13:07:08 Shutter LASER close 13:07:08 Received message from Camera: op=State serial=106882 13:07:08 GetSingleValue result=40 Value=cccccccc 13:07:08 SkyScan query 13:07:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:07:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:09 Parameters OK 13:07:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:09 Set A/D data flow result=40 13:07:09 Set A/D channel type result=40 13:07:09 Set A/D encoding result=40 13:07:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:09 Set channel filter=0.000000e+000 result=40 13:07:09 Config A/D Result=40 13:07:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:09 Get A/D filter: -9.255963e+061 result=40 13:07:09 Get A/D value=-858993460 result=40 13:07:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:09 Parameters OK 13:07:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:09 Set A/D data flow result=40 13:07:09 Set A/D channel type result=40 13:07:09 Set A/D encoding result=40 13:07:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:09 Set channel filter=0.000000e+000 result=40 13:07:09 Config A/D Result=40 13:07:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:09 Get A/D filter: -9.255963e+061 result=40 13:07:09 Get A/D value=-858993460 result=40 13:07:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:07:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:07:09 Aux= 13:07:09 Message to Camera, serial 106882 queued 13:07:45 Received message from Master: op=PointingHead serial=106895 13:07:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:07:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:07:46 Point started: ret=0 13:07:46 point_skyscan result=0 13:07:46 Check angles 13:07:46 SkyScan query 13:07:47 SkyScan query done: ret=0 az=153.24<-10216 ze=6.51<-11566 Statuses=0009 0008 13:07:47 Msec=0 True Az=153.24 Ze=6.51 Az status=0009 Ze status=0008 13:07:47 Check angles 13:07:47 SkyScan query 13:07:48 SkyScan query done: ret=0 az=135.72<-9048 ze=6.495<-11567 Statuses=0009 0008 13:07:48 Msec=750 True Az=135.72 Ze=6.495 Az status=0009 Ze status=0008 13:07:48 Check angles 13:07:48 SkyScan query 13:07:49 SkyScan query done: ret=0 az=118.26<-7884 ze=6.495<-11567 Statuses=0009 0008 13:07:49 Msec=1500 True Az=118.26 Ze=6.495 Az status=0009 Ze status=0008 13:07:49 Check angles 13:07:49 SkyScan query 13:07:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:07:49 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:07:49 Message to Master queued w/err=0: serial=106895 error=0 13:07:54 Received message from Master: op=Filter serial=106896 13:07:54 Color wheel filter change from 0 to 0 13:07:54 FLIGetFilterPos err=0 currentPosition=0 13:07:54 FLIGetStepsRemaining err=0 RemainingSteps=0 13:07:54 Filter is already there-color wheel unchanged 13:07:54 Received message from Master: op=Shutter serial=106897 13:07:54 Shutter LASER close 13:07:55 Received message from Camera: op=State serial=106899 13:07:55 GetSingleValue result=40 Value=cccccccc 13:07:55 SkyScan query 13:07:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:07:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:55 Parameters OK 13:07:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:55 Set A/D data flow result=40 13:07:55 Set A/D channel type result=40 13:07:55 Set A/D encoding result=40 13:07:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:55 Set channel filter=0.000000e+000 result=40 13:07:55 Config A/D Result=40 13:07:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:55 Get A/D filter: -9.255963e+061 result=40 13:07:55 Get A/D value=-858993460 result=40 13:07:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:55 Parameters OK 13:07:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:55 Set A/D data flow result=40 13:07:55 Set A/D channel type result=40 13:07:55 Set A/D encoding result=40 13:07:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:55 Set channel filter=0.000000e+000 result=40 13:07:55 Config A/D Result=40 13:07:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:55 Get A/D filter: -9.255963e+061 result=40 13:07:55 Get A/D value=-858993460 result=40 13:07:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:07:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:07:55 Aux= 13:07:55 Message to Camera, serial 106899 queued 13:08:32 Received message from Master: op=PointingHead serial=106912 13:08:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:08:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:08:32 Point started: ret=0 13:08:32 point_skyscan result=0 13:08:33 Check angles 13:08:33 SkyScan query 13:08:34 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.43<-13562 Statuses=0008 0009 13:08:34 Msec=0 True Az=112.98 Ze=-23.43 Az status=0008 Ze status=0009 13:08:34 Check angles 13:08:34 SkyScan query 13:08:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.775<-14985 Statuses=0008 0009 13:08:34 Msec=750 True Az=112.995 Ze=-44.775 Az status=0008 Ze status=0009 13:08:35 Check angles 13:08:35 SkyScan query 13:08:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.76<-16384 Statuses=0008 0009 13:08:35 Msec=1500 True Az=112.995 Ze=-65.76 Az status=0008 Ze status=0009 13:08:35 Check angles 13:08:35 SkyScan query 13:08:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.225<-17815 Statuses=0008 0009 13:08:36 Msec=2250 True Az=112.995 Ze=-87.225 Az status=0008 Ze status=0009 13:08:36 Check angles 13:08:36 SkyScan query 13:08:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.555<-19237 Statuses=0008 0009 13:08:37 Msec=3000 True Az=112.995 Ze=-108.555 Az status=0008 Ze status=0009 13:08:37 Check angles 13:08:37 SkyScan query 13:08:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.945<-20663 Statuses=0008 0009 13:08:37 Msec=3750 True Az=112.995 Ze=-129.945 Az status=0008 Ze status=0009 13:08:38 Check angles 13:08:38 SkyScan query 13:08:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.855<-22057 Statuses=0008 0009 13:08:38 Msec=4500 True Az=112.995 Ze=-150.855 Az status=0008 Ze status=0009 13:08:38 Check angles 13:08:38 SkyScan query 13:08:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.825<-23455 Statuses=0008 0009 13:08:39 Msec=5250 True Az=112.995 Ze=-171.825 Az status=0008 Ze status=0009 13:08:39 Check angles 13:08:39 SkyScan query 13:08:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:08:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:08:40 Message to Master queued w/err=0: serial=106912 error=0 13:08:45 Received message from Master: op=Filter serial=106913 13:08:45 Color wheel filter change from 0 to 0 13:08:45 FLIGetFilterPos err=0 currentPosition=0 13:08:45 FLIGetStepsRemaining err=0 RemainingSteps=0 13:08:45 Filter is already there-color wheel unchanged 13:08:45 Received message from Master: op=Shutter serial=106914 13:08:45 Shutter LASER open 13:08:45 Received message from Camera: op=State serial=106916 13:08:45 GetSingleValue result=40 Value=cccccccc 13:08:45 SkyScan query 13:08:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:08:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:46 Parameters OK 13:08:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:46 Set A/D data flow result=40 13:08:46 Set A/D channel type result=40 13:08:46 Set A/D encoding result=40 13:08:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:46 Set channel filter=0.000000e+000 result=40 13:08:46 Config A/D Result=40 13:08:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:46 Get A/D filter: -9.255963e+061 result=40 13:08:46 Get A/D value=-858993460 result=40 13:08:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:46 Parameters OK 13:08:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:46 Set A/D data flow result=40 13:08:46 Set A/D channel type result=40 13:08:46 Set A/D encoding result=40 13:08:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:46 Set channel filter=0.000000e+000 result=40 13:08:46 Config A/D Result=40 13:08:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:46 Get A/D filter: -9.255963e+061 result=40 13:08:46 Get A/D value=-858993460 result=40 13:08:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:08:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:08:46 Aux= 13:08:46 Message to Camera, serial 106916 queued 13:08:54 Received message from Master: op=Shutter serial=106926 13:08:54 Shutter LASER close 13:08:54 Received message from Master: op=PointingHead serial=106930 13:08:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:08:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:08:55 Point started: ret=0 13:08:55 point_skyscan result=0 13:08:56 Check angles 13:08:56 SkyScan query 13:08:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 13:08:56 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 13:08:56 Check angles 13:08:56 SkyScan query 13:08:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 13:08:57 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 13:08:57 Check angles 13:08:57 SkyScan query 13:08:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.565<-18771 Statuses=0008 0009 13:08:58 Msec=1500 True Az=112.995 Ze=-101.565 Az status=0008 Ze status=0009 13:08:58 Check angles 13:08:58 SkyScan query 13:08:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.58<-17372 Statuses=0008 0009 13:08:58 Msec=2250 True Az=112.995 Ze=-80.58 Az status=0008 Ze status=0009 13:08:59 Check angles 13:08:59 SkyScan query 13:08:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.64<-15976 Statuses=0008 0009 13:08:59 Msec=3000 True Az=112.995 Ze=-59.64 Az status=0008 Ze status=0009 13:08:59 Check angles 13:08:59 SkyScan query 13:09:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.175<-14545 Statuses=0008 0009 13:09:00 Msec=3750 True Az=112.995 Ze=-38.175 Az status=0008 Ze status=0009 13:09:00 Check angles 13:09:00 SkyScan query 13:09:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.25<-13150 Statuses=0008 0009 13:09:01 Msec=4500 True Az=112.995 Ze=-17.25 Az status=0008 Ze status=0009 13:09:01 Check angles 13:09:01 SkyScan query 13:09:01 SkyScan query done: ret=0 az=112.995<-7533 ze=3.735<-11751 Statuses=0008 0009 13:09:01 Msec=5250 True Az=112.995 Ze=3.735 Az status=0008 Ze status=0009 13:09:02 Check angles 13:09:02 SkyScan query 13:09:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:09:02 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:09:02 Message to Master queued w/err=0: serial=106930 error=0 13:09:07 Received message from Master: op=Filter serial=106931 13:09:07 Color wheel filter change from 0 to 0 13:09:07 FLIGetFilterPos err=0 currentPosition=0 13:09:07 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:07 Filter is already there-color wheel unchanged 13:09:07 Received message from Master: op=Shutter serial=106932 13:09:07 Shutter LASER close 13:09:08 Received message from Camera: op=State serial=106934 13:09:08 GetSingleValue result=40 Value=cccccccc 13:09:08 SkyScan query 13:09:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:09:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:08 Parameters OK 13:09:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:08 Set A/D data flow result=40 13:09:08 Set A/D channel type result=40 13:09:08 Set A/D encoding result=40 13:09:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:08 Set channel filter=0.000000e+000 result=40 13:09:08 Config A/D Result=40 13:09:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:08 Get A/D filter: -9.255963e+061 result=40 13:09:08 Get A/D value=-858993460 result=40 13:09:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:08 Parameters OK 13:09:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:08 Set A/D data flow result=40 13:09:08 Set A/D channel type result=40 13:09:08 Set A/D encoding result=40 13:09:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:08 Set channel filter=0.000000e+000 result=40 13:09:08 Config A/D Result=40 13:09:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:08 Get A/D filter: -9.255963e+061 result=40 13:09:08 Get A/D value=-858993460 result=40 13:09:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:08 Aux= 13:09:08 Message to Camera, serial 106934 queued 13:09:45 Received message from Master: op=PointingHead serial=106947 13:09:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:09:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:09:45 Point started: ret=0 13:09:45 point_skyscan result=0 13:09:46 Check angles 13:09:46 SkyScan query 13:09:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:09:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:09:47 Message to Master queued w/err=0: serial=106947 error=0 13:09:52 Received message from Master: op=Filter serial=106948 13:09:52 Color wheel filter change from 0 to 0 13:09:52 FLIGetFilterPos err=0 currentPosition=0 13:09:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:52 Filter is already there-color wheel unchanged 13:09:52 Received message from Master: op=Shutter serial=106949 13:09:52 Shutter LASER close 13:09:52 Received message from Camera: op=State serial=106951 13:09:52 GetSingleValue result=40 Value=cccccccc 13:09:52 SkyScan query 13:09:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:09:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:52 Parameters OK 13:09:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:52 Set A/D data flow result=40 13:09:52 Set A/D channel type result=40 13:09:52 Set A/D encoding result=40 13:09:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:52 Set channel filter=0.000000e+000 result=40 13:09:52 Config A/D Result=40 13:09:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:52 Get A/D filter: -9.255963e+061 result=40 13:09:52 Get A/D value=-858993460 result=40 13:09:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:52 Parameters OK 13:09:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:52 Set A/D data flow result=40 13:09:52 Set A/D channel type result=40 13:09:52 Set A/D encoding result=40 13:09:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:52 Set channel filter=0.000000e+000 result=40 13:09:52 Config A/D Result=40 13:09:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:52 Get A/D filter: -9.255963e+061 result=40 13:09:52 Get A/D value=-858993460 result=40 13:09:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:52 Aux= 13:09:52 Message to Camera, serial 106951 queued 13:10:29 Received message from Master: op=PointingHead serial=106964 13:10:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:10:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:10:30 Point started: ret=0 13:10:30 point_skyscan result=0 13:10:30 Check angles 13:10:30 SkyScan query 13:10:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:10:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:10:31 Message to Master queued w/err=0: serial=106964 error=0 13:10:36 Received message from Master: op=Filter serial=106965 13:10:36 Color wheel filter change from 0 to 0 13:10:36 FLIGetFilterPos err=0 currentPosition=0 13:10:36 FLIGetStepsRemaining err=0 RemainingSteps=0 13:10:36 Filter is already there-color wheel unchanged 13:10:36 Received message from Master: op=Shutter serial=106966 13:10:36 Shutter LASER close 13:10:36 Received message from Camera: op=State serial=106968 13:10:36 GetSingleValue result=40 Value=cccccccc 13:10:36 SkyScan query 13:10:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:10:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:37 Parameters OK 13:10:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:37 Set A/D data flow result=40 13:10:37 Set A/D channel type result=40 13:10:37 Set A/D encoding result=40 13:10:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:37 Set channel filter=0.000000e+000 result=40 13:10:37 Config A/D Result=40 13:10:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:37 Get A/D filter: -9.255963e+061 result=40 13:10:37 Get A/D value=-858993460 result=40 13:10:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:37 Parameters OK 13:10:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:37 Set A/D data flow result=40 13:10:37 Set A/D channel type result=40 13:10:37 Set A/D encoding result=40 13:10:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:37 Set channel filter=0.000000e+000 result=40 13:10:37 Config A/D Result=40 13:10:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:37 Get A/D filter: -9.255963e+061 result=40 13:10:37 Get A/D value=-858993460 result=40 13:10:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:10:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:10:37 Aux= 13:10:37 Message to Camera, serial 106968 queued 13:11:14 Received message from Master: op=PointingHead serial=106981 13:11:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:11:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:11:14 Point started: ret=0 13:11:14 point_skyscan result=0 13:11:15 Check angles 13:11:15 SkyScan query 13:11:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:11:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:11:15 Message to Master queued w/err=0: serial=106981 error=0 13:11:20 Received message from Master: op=Filter serial=106982 13:11:20 Color wheel filter change from 0 to 0 13:11:20 FLIGetFilterPos err=0 currentPosition=0 13:11:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:11:20 Filter is already there-color wheel unchanged 13:11:21 Received message from Master: op=Shutter serial=106983 13:11:21 Shutter LASER close 13:11:21 Received message from Camera: op=State serial=106985 13:11:21 GetSingleValue result=40 Value=cccccccc 13:11:21 SkyScan query 13:11:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:11:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:21 Parameters OK 13:11:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:21 Set A/D data flow result=40 13:11:21 Set A/D channel type result=40 13:11:21 Set A/D encoding result=40 13:11:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:21 Set channel filter=0.000000e+000 result=40 13:11:21 Config A/D Result=40 13:11:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:21 Get A/D filter: -9.255963e+061 result=40 13:11:21 Get A/D value=-858993460 result=40 13:11:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:21 Parameters OK 13:11:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:21 Set A/D data flow result=40 13:11:21 Set A/D channel type result=40 13:11:21 Set A/D encoding result=40 13:11:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:21 Set channel filter=0.000000e+000 result=40 13:11:21 Config A/D Result=40 13:11:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:21 Get A/D filter: -9.255963e+061 result=40 13:11:21 Get A/D value=-858993460 result=40 13:11:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:11:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:11:21 Aux= 13:11:21 Message to Camera, serial 106985 queued 13:11:58 Received message from Master: op=PointingHead serial=106998 13:11:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:11:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:11:58 Point started: ret=0 13:11:58 point_skyscan result=0 13:11:59 Check angles 13:11:59 SkyScan query 13:12:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 13:12:00 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 13:12:00 Check angles 13:12:00 SkyScan query 13:12:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 13:12:00 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 13:12:01 Check angles 13:12:01 SkyScan query 13:12:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 13:12:01 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 13:12:01 Check angles 13:12:01 SkyScan query 13:12:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.67<-17778 Statuses=0008 0009 13:12:02 Msec=2250 True Az=112.995 Ze=-86.67 Az status=0008 Ze status=0009 13:12:02 Check angles 13:12:02 SkyScan query 13:12:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.64<-19176 Statuses=0008 0009 13:12:03 Msec=3000 True Az=112.995 Ze=-107.64 Az status=0008 Ze status=0009 13:12:03 Check angles 13:12:03 SkyScan query 13:12:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.58<-20572 Statuses=0008 0009 13:12:03 Msec=3750 True Az=112.995 Ze=-128.58 Az status=0008 Ze status=0009 13:12:04 Check angles 13:12:04 SkyScan query 13:12:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-150<-22000 Statuses=0008 0009 13:12:04 Msec=4500 True Az=112.995 Ze=-150 Az status=0008 Ze status=0009 13:12:04 Check angles 13:12:04 SkyScan query 13:12:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.85<-23390 Statuses=0008 0009 13:12:05 Msec=5250 True Az=112.995 Ze=-170.85 Az status=0008 Ze status=0009 13:12:05 Check angles 13:12:05 SkyScan query 13:12:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:12:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:12:06 Message to Master queued w/err=0: serial=106998 error=0 13:12:11 Received message from Master: op=Filter serial=106999 13:12:11 Color wheel filter change from 0 to 0 13:12:11 FLIGetFilterPos err=0 currentPosition=0 13:12:11 FLIGetStepsRemaining err=0 RemainingSteps=0 13:12:11 Filter is already there-color wheel unchanged 13:12:11 Received message from Master: op=Shutter serial=107000 13:12:11 Shutter LASER open 13:12:11 Received message from Camera: op=State serial=107002 13:12:11 GetSingleValue result=40 Value=cccccccc 13:12:11 SkyScan query 13:12:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:12:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:12 Parameters OK 13:12:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:12 Set A/D data flow result=40 13:12:12 Set A/D channel type result=40 13:12:12 Set A/D encoding result=40 13:12:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:12 Set channel filter=0.000000e+000 result=40 13:12:12 Config A/D Result=40 13:12:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:12 Get A/D filter: -9.255963e+061 result=40 13:12:12 Get A/D value=-858993460 result=40 13:12:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:12 Parameters OK 13:12:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:12 Set A/D data flow result=40 13:12:12 Set A/D channel type result=40 13:12:12 Set A/D encoding result=40 13:12:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:12 Set channel filter=0.000000e+000 result=40 13:12:12 Config A/D Result=40 13:12:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:12 Get A/D filter: -9.255963e+061 result=40 13:12:12 Get A/D value=-858993460 result=40 13:12:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:12:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:12:12 Aux= 13:12:12 Message to Camera, serial 107002 queued 13:12:20 Received message from Master: op=Shutter serial=107012 13:12:20 Shutter LASER close 13:12:21 Received message from Master: op=PointingHead serial=107016 13:12:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:12:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:12:21 Point started: ret=0 13:12:21 point_skyscan result=0 13:12:22 Check angles 13:12:22 SkyScan query 13:12:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.115<-21541 Statuses=0008 0009 13:12:22 Msec=0 True Az=112.995 Ze=-143.115 Az status=0008 Ze status=0009 13:12:22 Check angles 13:12:22 SkyScan query 13:12:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.145<-20143 Statuses=0008 0009 13:12:23 Msec=750 True Az=112.995 Ze=-122.145 Az status=0008 Ze status=0009 13:12:23 Check angles 13:12:23 SkyScan query 13:12:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.235<-18749 Statuses=0008 0009 13:12:24 Msec=1500 True Az=112.995 Ze=-101.235 Az status=0008 Ze status=0009 13:12:24 Check angles 13:12:24 SkyScan query 13:12:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.235<-17349 Statuses=0008 0009 13:12:25 Msec=2250 True Az=112.995 Ze=-80.235 Az status=0008 Ze status=0009 13:12:25 Check angles 13:12:25 SkyScan query 13:12:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.31<-15954 Statuses=0008 0009 13:12:25 Msec=3000 True Az=112.995 Ze=-59.31 Az status=0008 Ze status=0009 13:12:25 Check angles 13:12:25 SkyScan query 13:12:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.28<-14552 Statuses=0008 0009 13:12:26 Msec=3750 True Az=112.995 Ze=-38.28 Az status=0008 Ze status=0009 13:12:26 Check angles 13:12:26 SkyScan query 13:12:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.355<-13157 Statuses=0008 0009 13:12:27 Msec=4500 True Az=112.995 Ze=-17.355 Az status=0008 Ze status=0009 13:12:27 Check angles 13:12:27 SkyScan query 13:12:28 SkyScan query done: ret=0 az=112.995<-7533 ze=3.645<-11757 Statuses=0008 0009 13:12:28 Msec=5250 True Az=112.995 Ze=3.645 Az status=0008 Ze status=0009 13:12:28 Check angles 13:12:28 SkyScan query 13:12:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:12:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:12:28 Message to Master queued w/err=0: serial=107016 error=0 13:12:33 Received message from Master: op=Filter serial=107017 13:12:33 Color wheel filter change from 0 to 0 13:12:33 FLIGetFilterPos err=0 currentPosition=0 13:12:33 FLIGetStepsRemaining err=0 RemainingSteps=0 13:12:33 Filter is already there-color wheel unchanged 13:12:33 Received message from Master: op=Shutter serial=107018 13:12:33 Shutter LASER close 13:12:34 Received message from Camera: op=State serial=107020 13:12:34 GetSingleValue result=40 Value=cccccccc 13:12:34 SkyScan query 13:12:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:12:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:34 Parameters OK 13:12:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:34 Set A/D data flow result=40 13:12:34 Set A/D channel type result=40 13:12:34 Set A/D encoding result=40 13:12:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:34 Set channel filter=0.000000e+000 result=40 13:12:34 Config A/D Result=40 13:12:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:34 Get A/D filter: -9.255963e+061 result=40 13:12:34 Get A/D value=-858993460 result=40 13:12:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:34 Parameters OK 13:12:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:34 Set A/D data flow result=40 13:12:34 Set A/D channel type result=40 13:12:34 Set A/D encoding result=40 13:12:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:34 Set channel filter=0.000000e+000 result=40 13:12:34 Config A/D Result=40 13:12:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:34 Get A/D filter: -9.255963e+061 result=40 13:12:34 Get A/D value=-858993460 result=40 13:12:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:12:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:12:34 Aux= 13:12:34 Message to Camera, serial 107020 queued 13:13:11 Received message from Master: op=PointingHead serial=107033 13:13:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:13:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:13:11 Point started: ret=0 13:13:11 point_skyscan result=0 13:13:12 Check angles 13:13:12 SkyScan query 13:13:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:13:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:13:13 Message to Master queued w/err=0: serial=107033 error=0 13:13:18 Received message from Master: op=Filter serial=107034 13:13:18 Color wheel filter change from 0 to 0 13:13:18 FLIGetFilterPos err=0 currentPosition=0 13:13:18 FLIGetStepsRemaining err=0 RemainingSteps=0 13:13:18 Filter is already there-color wheel unchanged 13:13:18 Received message from Master: op=Shutter serial=107035 13:13:18 Shutter LASER close 13:13:18 Received message from Camera: op=State serial=107037 13:13:18 GetSingleValue result=40 Value=cccccccc 13:13:18 SkyScan query 13:13:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:13:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:18 Parameters OK 13:13:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:18 Set A/D data flow result=40 13:13:18 Set A/D channel type result=40 13:13:18 Set A/D encoding result=40 13:13:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:18 Set channel filter=0.000000e+000 result=40 13:13:18 Config A/D Result=40 13:13:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:18 Get A/D filter: -9.255963e+061 result=40 13:13:18 Get A/D value=-858993460 result=40 13:13:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:18 Parameters OK 13:13:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:18 Set A/D data flow result=40 13:13:18 Set A/D channel type result=40 13:13:18 Set A/D encoding result=40 13:13:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:18 Set channel filter=0.000000e+000 result=40 13:13:18 Config A/D Result=40 13:13:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:18 Get A/D filter: -9.255963e+061 result=40 13:13:18 Get A/D value=-858993460 result=40 13:13:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:13:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:13:18 Aux= 13:13:18 Message to Camera, serial 107037 queued 13:13:55 Received message from Master: op=PointingHead serial=107050 13:13:55 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:13:55 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:13:56 Point started: ret=0 13:13:56 point_skyscan result=0 13:13:57 Check angles 13:13:57 SkyScan query 13:13:57 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.51<-12434 Statuses=0009 0008 13:13:57 Msec=0 True Az=135.915 Ze=-6.51 Az status=0009 Ze status=0008 13:13:57 Check angles 13:13:57 SkyScan query 13:13:58 SkyScan query done: ret=0 az=153.33<-10222 ze=-6.495<-12433 Statuses=0009 0008 13:13:58 Msec=750 True Az=153.33 Ze=-6.495 Az status=0009 Ze status=0008 13:13:58 Check angles 13:13:58 SkyScan query 13:13:59 SkyScan query done: ret=0 az=171.15<-11410 ze=-6.495<-12433 Statuses=0009 0008 13:13:59 Msec=1500 True Az=171.15 Ze=-6.495 Az status=0009 Ze status=0008 13:13:59 Check angles 13:13:59 SkyScan query 13:13:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:13:59 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:13:59 Message to Master queued w/err=0: serial=107050 error=0 13:14:04 Received message from Master: op=Filter serial=107051 13:14:04 Color wheel filter change from 0 to 0 13:14:04 FLIGetFilterPos err=0 currentPosition=0 13:14:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:14:04 Filter is already there-color wheel unchanged 13:14:05 Received message from Master: op=Shutter serial=107052 13:14:05 Shutter LASER close 13:14:05 Received message from Camera: op=State serial=107054 13:14:05 GetSingleValue result=40 Value=cccccccc 13:14:05 SkyScan query 13:14:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:14:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:05 Parameters OK 13:14:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:05 Set A/D data flow result=40 13:14:05 Set A/D channel type result=40 13:14:05 Set A/D encoding result=40 13:14:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:05 Set channel filter=0.000000e+000 result=40 13:14:05 Config A/D Result=40 13:14:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:05 Get A/D filter: -9.255963e+061 result=40 13:14:05 Get A/D value=-858993460 result=40 13:14:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:05 Parameters OK 13:14:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:05 Set A/D data flow result=40 13:14:05 Set A/D channel type result=40 13:14:05 Set A/D encoding result=40 13:14:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:05 Set channel filter=0.000000e+000 result=40 13:14:05 Config A/D Result=40 13:14:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:05 Get A/D filter: -9.255963e+061 result=40 13:14:05 Get A/D value=-858993460 result=40 13:14:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:14:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:14:05 Aux= 13:14:05 Message to Camera, serial 107054 queued [UTC 2019-3-4 13:14:42] 13:14:42 Received message from Master: op=PointingHead serial=107067 13:14:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:14:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:14:42 Point started: ret=0 13:14:42 point_skyscan result=0 13:14:43 Check angles 13:14:43 SkyScan query 13:14:44 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 13:14:44 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 13:14:44 Check angles 13:14:44 SkyScan query 13:14:44 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 13:14:44 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 13:14:45 Check angles 13:14:45 SkyScan query 13:14:45 SkyScan query done: ret=0 az=117.675<-7845 ze=6.495<-11567 Statuses=0009 0008 13:14:45 Msec=1500 True Az=117.675 Ze=6.495 Az status=0009 Ze status=0008 13:14:45 Check angles 13:14:45 SkyScan query 13:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:14:46 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:14:46 Message to Master queued w/err=0: serial=107067 error=0 13:14:51 Received message from Master: op=Filter serial=107068 13:14:51 Color wheel filter change from 0 to 0 13:14:51 FLIGetFilterPos err=0 currentPosition=0 13:14:51 FLIGetStepsRemaining err=0 RemainingSteps=0 13:14:51 Filter is already there-color wheel unchanged 13:14:51 Received message from Master: op=Shutter serial=107069 13:14:51 Shutter LASER close 13:14:51 Received message from Camera: op=State serial=107071 13:14:51 GetSingleValue result=40 Value=cccccccc 13:14:51 SkyScan query 13:14:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:14:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:52 Parameters OK 13:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:52 Set A/D data flow result=40 13:14:52 Set A/D channel type result=40 13:14:52 Set A/D encoding result=40 13:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:52 Set channel filter=0.000000e+000 result=40 13:14:52 Config A/D Result=40 13:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:52 Get A/D filter: -9.255963e+061 result=40 13:14:52 Get A/D value=-858993460 result=40 13:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:52 Parameters OK 13:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:52 Set A/D data flow result=40 13:14:52 Set A/D channel type result=40 13:14:52 Set A/D encoding result=40 13:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:52 Set channel filter=0.000000e+000 result=40 13:14:52 Config A/D Result=40 13:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:52 Get A/D filter: -9.255963e+061 result=40 13:14:52 Get A/D value=-858993460 result=40 13:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:14:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:14:52 Aux= 13:14:52 Message to Camera, serial 107071 queued 13:15:29 Received message from Master: op=PointingHead serial=107084 13:15:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:15:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:15:29 Point started: ret=0 13:15:29 point_skyscan result=0 13:15:30 Check angles 13:15:30 SkyScan query 13:15:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 13:15:30 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 13:15:30 Check angles 13:15:30 SkyScan query 13:15:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.31<-14954 Statuses=0008 0009 13:15:31 Msec=750 True Az=112.995 Ze=-44.31 Az status=0008 Ze status=0009 13:15:31 Check angles 13:15:31 SkyScan query 13:15:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.235<-16349 Statuses=0008 0009 13:15:32 Msec=1500 True Az=112.995 Ze=-65.235 Az status=0008 Ze status=0009 13:15:32 Check angles 13:15:32 SkyScan query 13:15:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.19<-17746 Statuses=0008 0009 13:15:33 Msec=2250 True Az=112.995 Ze=-86.19 Az status=0008 Ze status=0009 13:15:33 Check angles 13:15:33 SkyScan query 13:15:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.1<-19140 Statuses=0008 0009 13:15:33 Msec=3000 True Az=112.995 Ze=-107.1 Az status=0008 Ze status=0009 13:15:33 Check angles 13:15:33 SkyScan query 13:15:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.1<-20540 Statuses=0008 0009 13:15:34 Msec=3750 True Az=112.995 Ze=-128.1 Az status=0008 Ze status=0009 13:15:34 Check angles 13:15:34 SkyScan query 13:15:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.07<-21938 Statuses=0008 0009 13:15:35 Msec=4500 True Az=112.995 Ze=-149.07 Az status=0008 Ze status=0009 13:15:35 Check angles 13:15:35 SkyScan query 13:15:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.01<-23334 Statuses=0008 0009 13:15:36 Msec=5250 True Az=112.995 Ze=-170.01 Az status=0008 Ze status=0009 13:15:36 Check angles 13:15:36 SkyScan query 13:15:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:15:36 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:15:36 Message to Master queued w/err=0: serial=107084 error=0 13:15:41 Received message from Master: op=Filter serial=107085 13:15:41 Color wheel filter change from 0 to 0 13:15:41 FLIGetFilterPos err=0 currentPosition=0 13:15:41 FLIGetStepsRemaining err=0 RemainingSteps=0 13:15:41 Filter is already there-color wheel unchanged 13:15:41 Received message from Master: op=Shutter serial=107086 13:15:41 Shutter LASER open 13:15:42 Received message from Camera: op=State serial=107088 13:15:42 GetSingleValue result=40 Value=cccccccc 13:15:42 SkyScan query 13:15:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:15:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:42 Parameters OK 13:15:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:42 Set A/D data flow result=40 13:15:42 Set A/D channel type result=40 13:15:42 Set A/D encoding result=40 13:15:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:42 Set channel filter=0.000000e+000 result=40 13:15:42 Config A/D Result=40 13:15:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:42 Get A/D filter: -9.255963e+061 result=40 13:15:42 Get A/D value=-858993460 result=40 13:15:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:42 Parameters OK 13:15:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:42 Set A/D data flow result=40 13:15:42 Set A/D channel type result=40 13:15:42 Set A/D encoding result=40 13:15:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:42 Set channel filter=0.000000e+000 result=40 13:15:42 Config A/D Result=40 13:15:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:42 Get A/D filter: -9.255963e+061 result=40 13:15:42 Get A/D value=-858993460 result=40 13:15:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:15:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:15:42 Aux= 13:15:42 Message to Camera, serial 107088 queued 13:15:51 Received message from Master: op=Shutter serial=107098 13:15:51 Shutter LASER close 13:15:51 Received message from Master: op=PointingHead serial=107102 13:15:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:15:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:15:51 Point started: ret=0 13:15:51 point_skyscan result=0 13:15:52 Check angles 13:15:52 SkyScan query 13:15:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.31<-21554 Statuses=0008 0009 13:15:53 Msec=0 True Az=112.995 Ze=-143.31 Az status=0008 Ze status=0009 13:15:53 Check angles 13:15:53 SkyScan query 13:15:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.355<-20157 Statuses=0008 0009 13:15:54 Msec=750 True Az=112.995 Ze=-122.355 Az status=0008 Ze status=0009 13:15:54 Check angles 13:15:54 SkyScan query 13:15:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.445<-18763 Statuses=0008 0009 13:15:54 Msec=1500 True Az=112.995 Ze=-101.445 Az status=0008 Ze status=0009 13:15:54 Check angles 13:15:54 SkyScan query 13:15:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.475<-17365 Statuses=0008 0009 13:15:55 Msec=2250 True Az=112.995 Ze=-80.475 Az status=0008 Ze status=0009 13:15:55 Check angles 13:15:55 SkyScan query 13:15:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.505<-15967 Statuses=0008 0009 13:15:56 Msec=3000 True Az=112.995 Ze=-59.505 Az status=0008 Ze status=0009 13:15:56 Check angles 13:15:56 SkyScan query 13:15:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.535<-14569 Statuses=0008 0009 13:15:57 Msec=3750 True Az=112.995 Ze=-38.535 Az status=0008 Ze status=0009 13:15:57 Check angles 13:15:57 SkyScan query 13:15:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.58<-13172 Statuses=0008 0009 13:15:57 Msec=4500 True Az=112.995 Ze=-17.58 Az status=0008 Ze status=0009 13:15:57 Check angles 13:15:57 SkyScan query 13:15:58 SkyScan query done: ret=0 az=112.98<-7532 ze=3.405<-11773 Statuses=0008 0009 13:15:58 Msec=5250 True Az=112.98 Ze=3.405 Az status=0008 Ze status=0009 13:15:58 Check angles 13:15:58 SkyScan query 13:15:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:15:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:15:59 Message to Master queued w/err=0: serial=107102 error=0 13:16:04 Received message from Master: op=Filter serial=107103 13:16:04 Color wheel filter change from 0 to 0 13:16:04 FLIGetFilterPos err=0 currentPosition=0 13:16:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:04 Filter is already there-color wheel unchanged 13:16:04 Received message from Master: op=Shutter serial=107104 13:16:04 Shutter LASER close 13:16:04 Received message from Camera: op=State serial=107106 13:16:04 GetSingleValue result=40 Value=cccccccc 13:16:04 SkyScan query 13:16:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:16:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:05 Parameters OK 13:16:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:05 Set A/D data flow result=40 13:16:05 Set A/D channel type result=40 13:16:05 Set A/D encoding result=40 13:16:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:05 Set channel filter=0.000000e+000 result=40 13:16:05 Config A/D Result=40 13:16:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:05 Get A/D filter: -9.255963e+061 result=40 13:16:05 Get A/D value=-858993460 result=40 13:16:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:05 Parameters OK 13:16:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:05 Set A/D data flow result=40 13:16:05 Set A/D channel type result=40 13:16:05 Set A/D encoding result=40 13:16:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:05 Set channel filter=0.000000e+000 result=40 13:16:05 Config A/D Result=40 13:16:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:05 Get A/D filter: -9.255963e+061 result=40 13:16:05 Get A/D value=-858993460 result=40 13:16:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:05 Aux= 13:16:05 Message to Camera, serial 107106 queued 13:16:42 Received message from Master: op=PointingHead serial=107119 13:16:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:16:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:16:42 Point started: ret=0 13:16:42 point_skyscan result=0 13:16:43 Check angles 13:16:43 SkyScan query 13:16:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:16:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:16:43 Message to Master queued w/err=0: serial=107119 error=0 13:16:48 Received message from Master: op=Filter serial=107120 13:16:48 Color wheel filter change from 0 to 0 13:16:48 FLIGetFilterPos err=0 currentPosition=0 13:16:48 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:48 Filter is already there-color wheel unchanged 13:16:48 Received message from Master: op=Shutter serial=107121 13:16:48 Shutter LASER close 13:16:48 Received message from Camera: op=State serial=107123 13:16:48 GetSingleValue result=40 Value=cccccccc 13:16:48 SkyScan query 13:16:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:16:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:49 Parameters OK 13:16:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:49 Set A/D data flow result=40 13:16:49 Set A/D channel type result=40 13:16:49 Set A/D encoding result=40 13:16:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:49 Set channel filter=0.000000e+000 result=40 13:16:49 Config A/D Result=40 13:16:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:49 Get A/D filter: -9.255963e+061 result=40 13:16:49 Get A/D value=-858993460 result=40 13:16:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:49 Parameters OK 13:16:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:49 Set A/D data flow result=40 13:16:49 Set A/D channel type result=40 13:16:49 Set A/D encoding result=40 13:16:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:49 Set channel filter=0.000000e+000 result=40 13:16:49 Config A/D Result=40 13:16:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:49 Get A/D filter: -9.255963e+061 result=40 13:16:49 Get A/D value=-858993460 result=40 13:16:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:49 Aux= 13:16:49 Message to Camera, serial 107123 queued 13:17:26 Received message from Master: op=PointingHead serial=107136 13:17:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:17:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:17:26 Point started: ret=0 13:17:26 point_skyscan result=0 13:17:27 Check angles 13:17:27 SkyScan query 13:17:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:17:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:17:27 Message to Master queued w/err=0: serial=107136 error=0 13:17:32 Received message from Master: op=Filter serial=107137 13:17:32 Color wheel filter change from 0 to 0 13:17:32 FLIGetFilterPos err=0 currentPosition=0 13:17:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:17:32 Filter is already there-color wheel unchanged 13:17:33 Received message from Master: op=Shutter serial=107138 13:17:33 Shutter LASER close 13:17:33 Received message from Camera: op=State serial=107140 13:17:33 GetSingleValue result=40 Value=cccccccc 13:17:33 SkyScan query 13:17:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:17:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:33 Parameters OK 13:17:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:33 Set A/D data flow result=40 13:17:33 Set A/D channel type result=40 13:17:33 Set A/D encoding result=40 13:17:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:33 Set channel filter=0.000000e+000 result=40 13:17:33 Config A/D Result=40 13:17:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:33 Get A/D filter: -9.255963e+061 result=40 13:17:33 Get A/D value=-858993460 result=40 13:17:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:33 Parameters OK 13:17:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:33 Set A/D data flow result=40 13:17:33 Set A/D channel type result=40 13:17:33 Set A/D encoding result=40 13:17:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:33 Set channel filter=0.000000e+000 result=40 13:17:33 Config A/D Result=40 13:17:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:33 Get A/D filter: -9.255963e+061 result=40 13:17:33 Get A/D value=-858993460 result=40 13:17:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:17:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:17:33 Aux= 13:17:33 Message to Camera, serial 107140 queued 13:18:10 Received message from Master: op=PointingHead serial=107153 13:18:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:18:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:18:10 Point started: ret=0 13:18:10 point_skyscan result=0 13:18:11 Check angles 13:18:11 SkyScan query 13:18:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:18:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:18:12 Message to Master queued w/err=0: serial=107153 error=0 13:18:17 Received message from Master: op=Filter serial=107154 13:18:17 Color wheel filter change from 0 to 0 13:18:17 FLIGetFilterPos err=0 currentPosition=0 13:18:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:18:17 Filter is already there-color wheel unchanged 13:18:17 Received message from Master: op=Shutter serial=107155 13:18:17 Shutter LASER close 13:18:17 Received message from Camera: op=State serial=107157 13:18:17 GetSingleValue result=40 Value=cccccccc 13:18:17 SkyScan query 13:18:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:18:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:18 Parameters OK 13:18:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:18 Set A/D data flow result=40 13:18:18 Set A/D channel type result=40 13:18:18 Set A/D encoding result=40 13:18:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:18 Set channel filter=0.000000e+000 result=40 13:18:18 Config A/D Result=40 13:18:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:18 Get A/D filter: -9.255963e+061 result=40 13:18:18 Get A/D value=-858993460 result=40 13:18:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:18 Parameters OK 13:18:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:18 Set A/D data flow result=40 13:18:18 Set A/D channel type result=40 13:18:18 Set A/D encoding result=40 13:18:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:18 Set channel filter=0.000000e+000 result=40 13:18:18 Config A/D Result=40 13:18:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:18 Get A/D filter: -9.255963e+061 result=40 13:18:18 Get A/D value=-858993460 result=40 13:18:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:18:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:18:18 Aux= 13:18:18 Message to Camera, serial 107157 queued 13:18:54 Received message from Master: op=PointingHead serial=107170 13:18:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:18:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:18:55 Point started: ret=0 13:18:55 point_skyscan result=0 13:18:56 Check angles 13:18:56 SkyScan query 13:18:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.865<-13591 Statuses=0008 0009 13:18:56 Msec=0 True Az=112.995 Ze=-23.865 Az status=0008 Ze status=0009 13:18:56 Check angles 13:18:56 SkyScan query 13:18:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 13:18:57 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 13:18:57 Check angles 13:18:57 SkyScan query 13:18:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.745<-16383 Statuses=0008 0009 13:18:58 Msec=1500 True Az=112.995 Ze=-65.745 Az status=0008 Ze status=0009 13:18:58 Check angles 13:18:58 SkyScan query 13:18:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.195<-17813 Statuses=0008 0009 13:18:58 Msec=2250 True Az=112.995 Ze=-87.195 Az status=0008 Ze status=0009 13:18:59 Check angles 13:18:59 SkyScan query 13:18:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.15<-19210 Statuses=0008 0009 13:18:59 Msec=3000 True Az=112.995 Ze=-108.15 Az status=0008 Ze status=0009 13:18:59 Check angles 13:18:59 SkyScan query 13:19:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.09<-20606 Statuses=0008 0009 13:19:00 Msec=3750 True Az=112.995 Ze=-129.09 Az status=0008 Ze status=0009 13:19:00 Check angles 13:19:00 SkyScan query 13:19:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.045<-22003 Statuses=0008 0009 13:19:01 Msec=4500 True Az=112.995 Ze=-150.045 Az status=0008 Ze status=0009 13:19:01 Check angles 13:19:01 SkyScan query 13:19:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0008 0009 13:19:01 Msec=5250 True Az=112.995 Ze=-170.895 Az status=0008 Ze status=0009 13:19:02 Check angles 13:19:02 SkyScan query 13:19:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:19:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:19:02 Message to Master queued w/err=0: serial=107170 error=0 13:19:07 Received message from Master: op=Filter serial=107171 13:19:07 Color wheel filter change from 0 to 0 13:19:07 FLIGetFilterPos err=0 currentPosition=0 13:19:07 FLIGetStepsRemaining err=0 RemainingSteps=0 13:19:07 Filter is already there-color wheel unchanged 13:19:07 Received message from Master: op=Shutter serial=107172 13:19:07 Shutter LASER open 13:19:08 Received message from Camera: op=State serial=107174 13:19:08 GetSingleValue result=40 Value=cccccccc 13:19:08 SkyScan query 13:19:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:19:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:08 Parameters OK 13:19:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:08 Set A/D data flow result=40 13:19:08 Set A/D channel type result=40 13:19:08 Set A/D encoding result=40 13:19:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:08 Set channel filter=0.000000e+000 result=40 13:19:08 Config A/D Result=40 13:19:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:08 Get A/D filter: -9.255963e+061 result=40 13:19:08 Get A/D value=-858993460 result=40 13:19:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:08 Parameters OK 13:19:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:08 Set A/D data flow result=40 13:19:08 Set A/D channel type result=40 13:19:08 Set A/D encoding result=40 13:19:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:08 Set channel filter=0.000000e+000 result=40 13:19:08 Config A/D Result=40 13:19:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:08 Get A/D filter: -9.255963e+061 result=40 13:19:08 Get A/D value=-858993460 result=40 13:19:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:19:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:19:08 Aux= 13:19:08 Message to Camera, serial 107174 queued 13:19:17 Received message from Master: op=Shutter serial=107184 13:19:17 Shutter LASER close 13:19:17 Received message from Master: op=PointingHead serial=107188 13:19:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:19:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:19:17 Point started: ret=0 13:19:17 point_skyscan result=0 13:19:18 Check angles 13:19:18 SkyScan query 13:19:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 13:19:19 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 13:19:19 Check angles 13:19:19 SkyScan query 13:19:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.475<-20165 Statuses=0008 0009 13:19:20 Msec=750 True Az=112.995 Ze=-122.475 Az status=0008 Ze status=0009 13:19:20 Check angles 13:19:20 SkyScan query 13:19:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.52<-18768 Statuses=0008 0009 13:19:20 Msec=1500 True Az=112.995 Ze=-101.52 Az status=0008 Ze status=0009 13:19:20 Check angles 13:19:20 SkyScan query 13:19:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.535<-17369 Statuses=0008 0009 13:19:21 Msec=2250 True Az=112.995 Ze=-80.535 Az status=0008 Ze status=0009 13:19:21 Check angles 13:19:21 SkyScan query 13:19:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.61<-15974 Statuses=0008 0009 13:19:22 Msec=3000 True Az=112.995 Ze=-59.61 Az status=0008 Ze status=0009 13:19:22 Check angles 13:19:22 SkyScan query 13:19:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.625<-14575 Statuses=0008 0009 13:19:23 Msec=3750 True Az=112.995 Ze=-38.625 Az status=0008 Ze status=0009 13:19:23 Check angles 13:19:23 SkyScan query 13:19:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.67<-13178 Statuses=0008 0009 13:19:23 Msec=4500 True Az=112.995 Ze=-17.67 Az status=0008 Ze status=0009 13:19:23 Check angles 13:19:23 SkyScan query 13:19:24 SkyScan query done: ret=0 az=112.995<-7533 ze=3.3<-11780 Statuses=0008 0009 13:19:24 Msec=5250 True Az=112.995 Ze=3.3 Az status=0008 Ze status=0009 13:19:24 Check angles 13:19:24 SkyScan query 13:19:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.525<-11565 Statuses=0008 0008 13:19:25 Msec=6000 True Az=112.995 Ze=6.525 Az status=0008 Ze status=0008 13:19:25 Message to Master queued w/err=0: serial=107188 error=0 13:19:30 Received message from Master: op=Filter serial=107189 13:19:30 Color wheel filter change from 0 to 0 13:19:30 FLIGetFilterPos err=0 currentPosition=0 13:19:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:19:30 Filter is already there-color wheel unchanged 13:19:30 Received message from Master: op=Shutter serial=107190 13:19:30 Shutter LASER close 13:19:30 Received message from Camera: op=State serial=107192 13:19:30 GetSingleValue result=40 Value=cccccccc 13:19:30 SkyScan query 13:19:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:19:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:31 Parameters OK 13:19:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:31 Set A/D data flow result=40 13:19:31 Set A/D channel type result=40 13:19:31 Set A/D encoding result=40 13:19:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:31 Set channel filter=0.000000e+000 result=40 13:19:31 Config A/D Result=40 13:19:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:31 Get A/D filter: -9.255963e+061 result=40 13:19:31 Get A/D value=-858993460 result=40 13:19:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:31 Parameters OK 13:19:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:31 Set A/D data flow result=40 13:19:31 Set A/D channel type result=40 13:19:31 Set A/D encoding result=40 13:19:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:31 Set channel filter=0.000000e+000 result=40 13:19:31 Config A/D Result=40 13:19:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:31 Get A/D filter: -9.255963e+061 result=40 13:19:31 Get A/D value=-858993460 result=40 13:19:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:19:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:19:31 Aux= 13:19:31 Message to Camera, serial 107192 queued 13:20:08 Received message from Master: op=PointingHead serial=107205 13:20:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:20:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:20:08 Point started: ret=0 13:20:08 point_skyscan result=0 13:20:09 Check angles 13:20:09 SkyScan query 13:20:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:20:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:20:09 Message to Master queued w/err=0: serial=107205 error=0 13:20:14 Received message from Master: op=Filter serial=107206 13:20:14 Color wheel filter change from 0 to 0 13:20:14 FLIGetFilterPos err=0 currentPosition=0 13:20:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:20:14 Filter is already there-color wheel unchanged 13:20:14 Received message from Master: op=Shutter serial=107207 13:20:14 Shutter LASER close 13:20:14 Received message from Camera: op=State serial=107209 13:20:14 GetSingleValue result=40 Value=cccccccc 13:20:14 SkyScan query 13:20:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:20:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:15 Parameters OK 13:20:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:15 Set A/D data flow result=40 13:20:15 Set A/D channel type result=40 13:20:15 Set A/D encoding result=40 13:20:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:15 Set channel filter=0.000000e+000 result=40 13:20:15 Config A/D Result=40 13:20:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:15 Get A/D filter: -9.255963e+061 result=40 13:20:15 Get A/D value=-858993460 result=40 13:20:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:15 Parameters OK 13:20:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:15 Set A/D data flow result=40 13:20:15 Set A/D channel type result=40 13:20:15 Set A/D encoding result=40 13:20:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:15 Set channel filter=0.000000e+000 result=40 13:20:15 Config A/D Result=40 13:20:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:15 Get A/D filter: -9.255963e+061 result=40 13:20:15 Get A/D value=-858993460 result=40 13:20:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:20:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:20:15 Aux= 13:20:15 Message to Camera, serial 107209 queued 13:20:51 Received message from Master: op=PointingHead serial=107221 13:20:51 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:20:51 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:20:51 Point started: ret=0 13:20:51 point_skyscan result=0 13:20:52 Check angles 13:20:52 SkyScan query 13:20:53 SkyScan query done: ret=0 az=135.78<-9052 ze=-6.51<-12434 Statuses=0009 0008 13:20:53 Msec=0 True Az=135.78 Ze=-6.51 Az status=0009 Ze status=0008 13:20:53 Check angles 13:20:53 SkyScan query 13:20:53 SkyScan query done: ret=0 az=153.27<-10218 ze=-6.51<-12434 Statuses=0009 0008 13:20:53 Msec=750 True Az=153.27 Ze=-6.51 Az status=0009 Ze status=0008 13:20:54 Check angles 13:20:54 SkyScan query 13:20:54 SkyScan query done: ret=0 az=171.15<-11410 ze=-6.495<-12433 Statuses=0009 0008 13:20:54 Msec=1500 True Az=171.15 Ze=-6.495 Az status=0009 Ze status=0008 13:20:54 Check angles 13:20:54 SkyScan query 13:20:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:20:55 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:20:55 Message to Master queued w/err=0: serial=107221 error=0 13:21:00 Received message from Master: op=Filter serial=107222 13:21:00 Color wheel filter change from 0 to 0 13:21:00 FLIGetFilterPos err=0 currentPosition=0 13:21:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:00 Filter is already there-color wheel unchanged 13:21:00 Received message from Master: op=Shutter serial=107223 13:21:00 Shutter LASER close 13:21:00 Received message from Camera: op=State serial=107225 13:21:00 GetSingleValue result=40 Value=cccccccc 13:21:00 SkyScan query 13:21:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:21:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:01 Parameters OK 13:21:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:01 Set A/D data flow result=40 13:21:01 Set A/D channel type result=40 13:21:01 Set A/D encoding result=40 13:21:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:01 Set channel filter=0.000000e+000 result=40 13:21:01 Config A/D Result=40 13:21:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:01 Get A/D filter: -9.255963e+061 result=40 13:21:01 Get A/D value=-858993460 result=40 13:21:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:01 Parameters OK 13:21:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:01 Set A/D data flow result=40 13:21:01 Set A/D channel type result=40 13:21:01 Set A/D encoding result=40 13:21:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:01 Set channel filter=0.000000e+000 result=40 13:21:01 Config A/D Result=40 13:21:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:01 Get A/D filter: -9.255963e+061 result=40 13:21:01 Get A/D value=-858993460 result=40 13:21:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:01 Aux= 13:21:01 Message to Camera, serial 107225 queued 13:21:38 Received message from Master: op=PointingHead serial=107238 13:21:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:21:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:21:38 Point started: ret=0 13:21:38 point_skyscan result=0 13:21:39 Check angles 13:21:39 SkyScan query 13:21:39 SkyScan query done: ret=0 az=152.805<-10187 ze=6.51<-11566 Statuses=0009 0008 13:21:39 Msec=0 True Az=152.805 Ze=6.51 Az status=0009 Ze status=0008 13:21:39 Check angles 13:21:39 SkyScan query 13:21:40 SkyScan query done: ret=0 az=134.79<-8986 ze=6.495<-11567 Statuses=0009 0008 13:21:40 Msec=750 True Az=134.79 Ze=6.495 Az status=0009 Ze status=0008 13:21:40 Check angles 13:21:40 SkyScan query 13:21:41 SkyScan query done: ret=0 az=117.495<-7833 ze=6.495<-11567 Statuses=0009 0008 13:21:41 Msec=1500 True Az=117.495 Ze=6.495 Az status=0009 Ze status=0008 13:21:41 Check angles 13:21:41 SkyScan query 13:21:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:21:41 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:21:41 Message to Master queued w/err=0: serial=107238 error=0 13:21:46 Received message from Master: op=Filter serial=107239 13:21:46 Color wheel filter change from 0 to 0 13:21:46 FLIGetFilterPos err=0 currentPosition=0 13:21:46 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:46 Filter is already there-color wheel unchanged 13:21:47 Received message from Master: op=Shutter serial=107240 13:21:47 Shutter LASER close 13:21:47 Received message from Camera: op=State serial=107242 13:21:47 GetSingleValue result=40 Value=cccccccc 13:21:47 SkyScan query 13:21:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:21:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:47 Parameters OK 13:21:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:47 Set A/D data flow result=40 13:21:47 Set A/D channel type result=40 13:21:47 Set A/D encoding result=40 13:21:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:47 Set channel filter=0.000000e+000 result=40 13:21:47 Config A/D Result=40 13:21:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:47 Get A/D filter: -9.255963e+061 result=40 13:21:47 Get A/D value=-858993460 result=40 13:21:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:47 Parameters OK 13:21:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:47 Set A/D data flow result=40 13:21:47 Set A/D channel type result=40 13:21:47 Set A/D encoding result=40 13:21:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:47 Set channel filter=0.000000e+000 result=40 13:21:47 Config A/D Result=40 13:21:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:47 Get A/D filter: -9.255963e+061 result=40 13:21:47 Get A/D value=-858993460 result=40 13:21:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:47 Aux= 13:21:47 Message to Camera, serial 107242 queued 13:22:24 Received message from Master: op=PointingHead serial=107255 13:22:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:22:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:22:24 Point started: ret=0 13:22:24 point_skyscan result=0 13:22:25 Check angles 13:22:25 SkyScan query 13:22:26 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.49<-13566 Statuses=0008 0009 13:22:26 Msec=0 True Az=112.98 Ze=-23.49 Az status=0008 Ze status=0009 13:22:26 Check angles 13:22:26 SkyScan query 13:22:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.85<-14990 Statuses=0008 0009 13:22:27 Msec=750 True Az=112.995 Ze=-44.85 Az status=0008 Ze status=0009 13:22:27 Check angles 13:22:27 SkyScan query 13:22:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.82<-16388 Statuses=0008 0009 13:22:27 Msec=1500 True Az=112.995 Ze=-65.82 Az status=0008 Ze status=0009 13:22:27 Check angles 13:22:27 SkyScan query 13:22:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.805<-17787 Statuses=0008 0009 13:22:28 Msec=2250 True Az=112.995 Ze=-86.805 Az status=0008 Ze status=0009 13:22:28 Check angles 13:22:28 SkyScan query 13:22:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 13:22:29 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 13:22:29 Check angles 13:22:29 SkyScan query 13:22:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.715<-20581 Statuses=0008 0009 13:22:30 Msec=3750 True Az=112.995 Ze=-128.715 Az status=0008 Ze status=0009 13:22:30 Check angles 13:22:30 SkyScan query 13:22:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.7<-21980 Statuses=0008 0009 13:22:30 Msec=4500 True Az=112.995 Ze=-149.7 Az status=0008 Ze status=0009 13:22:30 Check angles 13:22:30 SkyScan query 13:22:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.61<-23374 Statuses=0008 0009 13:22:31 Msec=5250 True Az=112.995 Ze=-170.61 Az status=0008 Ze status=0009 13:22:31 Check angles 13:22:31 SkyScan query 13:22:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:22:32 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:22:32 Message to Master queued w/err=0: serial=107255 error=0 13:22:37 Received message from Master: op=Filter serial=107256 13:22:37 Color wheel filter change from 0 to 0 13:22:37 FLIGetFilterPos err=0 currentPosition=0 13:22:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:22:37 Filter is already there-color wheel unchanged 13:22:37 Received message from Master: op=Shutter serial=107257 13:22:37 Shutter LASER open 13:22:37 Received message from Camera: op=State serial=107259 13:22:37 GetSingleValue result=40 Value=cccccccc 13:22:37 SkyScan query 13:22:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:22:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:38 Parameters OK 13:22:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:38 Set A/D data flow result=40 13:22:38 Set A/D channel type result=40 13:22:38 Set A/D encoding result=40 13:22:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:38 Set channel filter=0.000000e+000 result=40 13:22:38 Config A/D Result=40 13:22:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:38 Get A/D filter: -9.255963e+061 result=40 13:22:38 Get A/D value=-858993460 result=40 13:22:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:38 Parameters OK 13:22:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:38 Set A/D data flow result=40 13:22:38 Set A/D channel type result=40 13:22:38 Set A/D encoding result=40 13:22:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:38 Set channel filter=0.000000e+000 result=40 13:22:38 Config A/D Result=40 13:22:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:38 Get A/D filter: -9.255963e+061 result=40 13:22:38 Get A/D value=-858993460 result=40 13:22:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:22:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:22:38 Aux= 13:22:38 Message to Camera, serial 107259 queued 13:22:46 Received message from Master: op=Shutter serial=107269 13:22:46 Shutter LASER close 13:22:47 Received message from Master: op=PointingHead serial=107273 13:22:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:22:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:22:47 Point started: ret=0 13:22:47 point_skyscan result=0 13:22:48 Check angles 13:22:48 SkyScan query 13:22:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.475<-21565 Statuses=0008 0009 13:22:48 Msec=0 True Az=112.995 Ze=-143.475 Az status=0008 Ze status=0009 13:22:48 Check angles 13:22:48 SkyScan query 13:22:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.55<-20170 Statuses=0008 0009 13:22:49 Msec=750 True Az=112.995 Ze=-122.55 Az status=0008 Ze status=0009 13:22:49 Check angles 13:22:49 SkyScan query 13:22:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 13:22:50 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 13:22:50 Check angles 13:22:50 SkyScan query 13:22:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.725<-17315 Statuses=0008 0009 13:22:51 Msec=2250 True Az=112.995 Ze=-79.725 Az status=0008 Ze status=0009 13:22:51 Check angles 13:22:51 SkyScan query 13:22:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 13:22:51 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 13:22:51 Check angles 13:22:51 SkyScan query 13:22:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.41<-14494 Statuses=0008 0009 13:22:52 Msec=3750 True Az=112.995 Ze=-37.41 Az status=0008 Ze status=0009 13:22:52 Check angles 13:22:52 SkyScan query 13:22:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.02<-13068 Statuses=0008 0009 13:22:53 Msec=4500 True Az=112.995 Ze=-16.02 Az status=0008 Ze status=0009 13:22:53 Check angles 13:22:53 SkyScan query 13:22:54 SkyScan query done: ret=0 az=112.995<-7533 ze=4.725<-11685 Statuses=0008 0009 13:22:54 Msec=5250 True Az=112.995 Ze=4.725 Az status=0008 Ze status=0009 13:22:54 Check angles 13:22:54 SkyScan query 13:22:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:22:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:22:54 Message to Master queued w/err=0: serial=107273 error=0 13:22:59 Received message from Master: op=Filter serial=107274 13:22:59 Color wheel filter change from 0 to 0 13:22:59 FLIGetFilterPos err=0 currentPosition=0 13:22:59 FLIGetStepsRemaining err=0 RemainingSteps=0 13:22:59 Filter is already there-color wheel unchanged 13:22:59 Received message from Master: op=Shutter serial=107275 13:22:59 Shutter LASER close 13:23:00 Received message from Camera: op=State serial=107277 13:23:00 GetSingleValue result=40 Value=cccccccc 13:23:00 SkyScan query 13:23:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:23:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:00 Parameters OK 13:23:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:00 Set A/D data flow result=40 13:23:00 Set A/D channel type result=40 13:23:00 Set A/D encoding result=40 13:23:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:00 Set channel filter=0.000000e+000 result=40 13:23:00 Config A/D Result=40 13:23:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:00 Get A/D filter: -9.255963e+061 result=40 13:23:00 Get A/D value=-858993460 result=40 13:23:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:00 Parameters OK 13:23:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:00 Set A/D data flow result=40 13:23:00 Set A/D channel type result=40 13:23:00 Set A/D encoding result=40 13:23:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:00 Set channel filter=0.000000e+000 result=40 13:23:00 Config A/D Result=40 13:23:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:00 Get A/D filter: -9.255963e+061 result=40 13:23:00 Get A/D value=-858993460 result=40 13:23:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:00 Aux= 13:23:00 Message to Camera, serial 107277 queued 13:23:36 Received message from Master: op=PointingHead serial=107289 13:23:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:23:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:23:37 Point started: ret=0 13:23:37 point_skyscan result=0 13:23:37 Check angles 13:23:37 SkyScan query 13:23:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:23:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:23:38 Message to Master queued w/err=0: serial=107289 error=0 13:23:43 Received message from Master: op=Filter serial=107290 13:23:43 Color wheel filter change from 0 to 0 13:23:43 FLIGetFilterPos err=0 currentPosition=0 13:23:43 FLIGetStepsRemaining err=0 RemainingSteps=0 13:23:43 Filter is already there-color wheel unchanged 13:23:43 Received message from Master: op=Shutter serial=107291 13:23:43 Shutter LASER close 13:23:43 Received message from Camera: op=State serial=107293 13:23:43 GetSingleValue result=40 Value=cccccccc 13:23:43 SkyScan query 13:23:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:23:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:44 Parameters OK 13:23:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:44 Set A/D data flow result=40 13:23:44 Set A/D channel type result=40 13:23:44 Set A/D encoding result=40 13:23:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:44 Set channel filter=0.000000e+000 result=40 13:23:44 Config A/D Result=40 13:23:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:44 Get A/D filter: -9.255963e+061 result=40 13:23:44 Get A/D value=-858993460 result=40 13:23:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:44 Parameters OK 13:23:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:44 Set A/D data flow result=40 13:23:44 Set A/D channel type result=40 13:23:44 Set A/D encoding result=40 13:23:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:44 Set channel filter=0.000000e+000 result=40 13:23:44 Config A/D Result=40 13:23:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:44 Get A/D filter: -9.255963e+061 result=40 13:23:44 Get A/D value=-858993460 result=40 13:23:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:44 Aux= 13:23:44 Message to Camera, serial 107293 queued [UTC 2019-3-4 13:23:50] 13:24:21 Received message from Master: op=PointingHead serial=107306 13:24:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:24:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:24:21 Point started: ret=0 13:24:21 point_skyscan result=0 13:24:22 Check angles 13:24:22 SkyScan query 13:24:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:24:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:24:22 Message to Master queued w/err=0: serial=107306 error=0 13:24:27 Received message from Master: op=Filter serial=107307 13:24:27 Color wheel filter change from 0 to 0 13:24:27 FLIGetFilterPos err=0 currentPosition=0 13:24:27 FLIGetStepsRemaining err=0 RemainingSteps=0 13:24:27 Filter is already there-color wheel unchanged 13:24:27 Received message from Master: op=Shutter serial=107308 13:24:27 Shutter LASER close 13:24:27 Received message from Camera: op=State serial=107310 13:24:27 GetSingleValue result=40 Value=cccccccc 13:24:27 SkyScan query 13:24:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:24:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:28 Parameters OK 13:24:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:28 Set A/D data flow result=40 13:24:28 Set A/D channel type result=40 13:24:28 Set A/D encoding result=40 13:24:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:28 Set channel filter=0.000000e+000 result=40 13:24:28 Config A/D Result=40 13:24:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:28 Get A/D filter: -9.255963e+061 result=40 13:24:28 Get A/D value=-858993460 result=40 13:24:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:28 Parameters OK 13:24:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:28 Set A/D data flow result=40 13:24:28 Set A/D channel type result=40 13:24:28 Set A/D encoding result=40 13:24:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:28 Set channel filter=0.000000e+000 result=40 13:24:28 Config A/D Result=40 13:24:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:28 Get A/D filter: -9.255963e+061 result=40 13:24:28 Get A/D value=-858993460 result=40 13:24:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:24:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:24:28 Aux= 13:24:28 Message to Camera, serial 107310 queued 13:25:05 Received message from Master: op=PointingHead serial=107323 13:25:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:25:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:25:05 Point started: ret=0 13:25:05 point_skyscan result=0 13:25:06 Check angles 13:25:06 SkyScan query 13:25:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:25:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:25:06 Message to Master queued w/err=0: serial=107323 error=0 13:25:11 Received message from Master: op=Filter serial=107324 13:25:11 Color wheel filter change from 0 to 0 13:25:11 FLIGetFilterPos err=0 currentPosition=0 13:25:11 FLIGetStepsRemaining err=0 RemainingSteps=0 13:25:11 Filter is already there-color wheel unchanged 13:25:12 Received message from Master: op=Shutter serial=107325 13:25:12 Shutter LASER close 13:25:12 Received message from Camera: op=State serial=107327 13:25:12 GetSingleValue result=40 Value=cccccccc 13:25:12 SkyScan query 13:25:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:25:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:12 Parameters OK 13:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:12 Set A/D data flow result=40 13:25:12 Set A/D channel type result=40 13:25:12 Set A/D encoding result=40 13:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:12 Set channel filter=0.000000e+000 result=40 13:25:12 Config A/D Result=40 13:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:12 Get A/D filter: -9.255963e+061 result=40 13:25:12 Get A/D value=-858993460 result=40 13:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:12 Parameters OK 13:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:12 Set A/D data flow result=40 13:25:12 Set A/D channel type result=40 13:25:12 Set A/D encoding result=40 13:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:12 Set channel filter=0.000000e+000 result=40 13:25:12 Config A/D Result=40 13:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:12 Get A/D filter: -9.255963e+061 result=40 13:25:12 Get A/D value=-858993460 result=40 13:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:25:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:25:12 Aux= 13:25:12 Message to Camera, serial 107327 queued 13:25:49 Received message from Master: op=PointingHead serial=107340 13:25:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:25:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:25:49 Point started: ret=0 13:25:49 point_skyscan result=0 13:25:50 Check angles 13:25:50 SkyScan query 13:25:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 13:25:51 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 13:25:51 Check angles 13:25:51 SkyScan query 13:25:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 13:25:52 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 13:25:52 Check angles 13:25:52 SkyScan query 13:25:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.265<-16351 Statuses=0008 0009 13:25:52 Msec=1500 True Az=112.995 Ze=-65.265 Az status=0008 Ze status=0009 13:25:52 Check angles 13:25:52 SkyScan query 13:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.22<-17748 Statuses=0008 0009 13:25:53 Msec=2250 True Az=112.995 Ze=-86.22 Az status=0008 Ze status=0009 13:25:53 Check angles 13:25:53 SkyScan query 13:25:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.145<-19143 Statuses=0008 0009 13:25:54 Msec=3000 True Az=112.995 Ze=-107.145 Az status=0008 Ze status=0009 13:25:54 Check angles 13:25:54 SkyScan query 13:25:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.13<-20542 Statuses=0008 0009 13:25:55 Msec=3750 True Az=112.995 Ze=-128.13 Az status=0008 Ze status=0009 13:25:55 Check angles 13:25:55 SkyScan query 13:25:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.1<-21940 Statuses=0008 0009 13:25:55 Msec=4500 True Az=112.995 Ze=-149.1 Az status=0008 Ze status=0009 13:25:55 Check angles 13:25:55 SkyScan query 13:25:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.04<-23336 Statuses=0008 0009 13:25:56 Msec=5250 True Az=112.995 Ze=-170.04 Az status=0008 Ze status=0009 13:25:56 Check angles 13:25:56 SkyScan query 13:25:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:25:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:25:57 Message to Master queued w/err=0: serial=107340 error=0 13:26:02 Received message from Master: op=Filter serial=107341 13:26:02 Color wheel filter change from 0 to 0 13:26:02 FLIGetFilterPos err=0 currentPosition=0 13:26:02 FLIGetStepsRemaining err=0 RemainingSteps=0 13:26:02 Filter is already there-color wheel unchanged 13:26:02 Received message from Master: op=Shutter serial=107342 13:26:02 Shutter LASER open 13:26:02 Received message from Camera: op=State serial=107344 13:26:02 GetSingleValue result=40 Value=cccccccc 13:26:02 SkyScan query 13:26:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:26:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:03 Parameters OK 13:26:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:03 Set A/D data flow result=40 13:26:03 Set A/D channel type result=40 13:26:03 Set A/D encoding result=40 13:26:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:03 Set channel filter=0.000000e+000 result=40 13:26:03 Config A/D Result=40 13:26:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:03 Get A/D filter: -9.255963e+061 result=40 13:26:03 Get A/D value=-858993460 result=40 13:26:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:03 Parameters OK 13:26:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:03 Set A/D data flow result=40 13:26:03 Set A/D channel type result=40 13:26:03 Set A/D encoding result=40 13:26:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:03 Set channel filter=0.000000e+000 result=40 13:26:03 Config A/D Result=40 13:26:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:03 Get A/D filter: -9.255963e+061 result=40 13:26:03 Get A/D value=-858993460 result=40 13:26:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:26:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:26:03 Aux= 13:26:03 Message to Camera, serial 107344 queued 13:26:11 Received message from Master: op=Shutter serial=107354 13:26:11 Shutter LASER close 13:26:12 Received message from Master: op=PointingHead serial=107358 13:26:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:26:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:26:12 Point started: ret=0 13:26:12 point_skyscan result=0 13:26:13 Check angles 13:26:13 SkyScan query 13:26:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.86<-21524 Statuses=0008 0009 13:26:13 Msec=0 True Az=112.995 Ze=-142.86 Az status=0008 Ze status=0009 13:26:14 Check angles 13:26:14 SkyScan query 13:26:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.875<-20125 Statuses=0008 0009 13:26:14 Msec=750 True Az=112.995 Ze=-121.875 Az status=0008 Ze status=0009 13:26:14 Check angles 13:26:14 SkyScan query 13:26:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.95<-18730 Statuses=0008 0009 13:26:15 Msec=1500 True Az=112.995 Ze=-100.95 Az status=0008 Ze status=0009 13:26:15 Check angles 13:26:15 SkyScan query 13:26:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 13:26:16 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 13:26:16 Check angles 13:26:16 SkyScan query 13:26:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.04<-15936 Statuses=0008 0009 13:26:16 Msec=3000 True Az=112.995 Ze=-59.04 Az status=0008 Ze status=0009 13:26:17 Check angles 13:26:17 SkyScan query 13:26:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 13:26:17 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 13:26:17 Check angles 13:26:17 SkyScan query 13:26:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.085<-13139 Statuses=0008 0009 13:26:18 Msec=4500 True Az=112.995 Ze=-17.085 Az status=0008 Ze status=0009 13:26:18 Check angles 13:26:18 SkyScan query 13:26:19 SkyScan query done: ret=0 az=113.01<-7534 ze=4.23<-11718 Statuses=0008 0009 13:26:19 Msec=5250 True Az=113.01 Ze=4.23 Az status=0008 Ze status=0009 13:26:19 Check angles 13:26:19 SkyScan query 13:26:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:26:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:26:19 Message to Master queued w/err=0: serial=107358 error=0 13:26:24 Received message from Master: op=Filter serial=107359 13:26:24 Color wheel filter change from 0 to 0 13:26:24 FLIGetFilterPos err=0 currentPosition=0 13:26:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:26:24 Filter is already there-color wheel unchanged 13:26:25 Received message from Master: op=Shutter serial=107360 13:26:25 Shutter LASER close 13:26:25 Received message from Camera: op=State serial=107362 13:26:25 GetSingleValue result=40 Value=cccccccc 13:26:25 SkyScan query 13:26:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:26:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:25 Parameters OK 13:26:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:25 Set A/D data flow result=40 13:26:25 Set A/D channel type result=40 13:26:25 Set A/D encoding result=40 13:26:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:25 Set channel filter=0.000000e+000 result=40 13:26:25 Config A/D Result=40 13:26:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:25 Get A/D filter: -9.255963e+061 result=40 13:26:25 Get A/D value=-858993460 result=40 13:26:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:25 Parameters OK 13:26:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:25 Set A/D data flow result=40 13:26:25 Set A/D channel type result=40 13:26:25 Set A/D encoding result=40 13:26:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:25 Set channel filter=0.000000e+000 result=40 13:26:25 Config A/D Result=40 13:26:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:25 Get A/D filter: -9.255963e+061 result=40 13:26:25 Get A/D value=-858993460 result=40 13:26:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:26:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:26:25 Aux= 13:26:25 Message to Camera, serial 107362 queued 13:27:02 Received message from Master: op=PointingHead serial=107375 13:27:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:27:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:27:03 Point started: ret=0 13:27:03 point_skyscan result=0 13:27:03 Check angles 13:27:03 SkyScan query 13:27:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:27:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:27:04 Message to Master queued w/err=0: serial=107375 error=0 13:27:09 Received message from Master: op=Filter serial=107376 13:27:09 Color wheel filter change from 0 to 0 13:27:09 FLIGetFilterPos err=0 currentPosition=0 13:27:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:27:09 Filter is already there-color wheel unchanged 13:27:09 Received message from Master: op=Shutter serial=107377 13:27:09 Shutter LASER close 13:27:09 Received message from Camera: op=State serial=107379 13:27:09 GetSingleValue result=40 Value=cccccccc 13:27:09 SkyScan query 13:27:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:27:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:10 Parameters OK 13:27:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:10 Set A/D data flow result=40 13:27:10 Set A/D channel type result=40 13:27:10 Set A/D encoding result=40 13:27:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:10 Set channel filter=0.000000e+000 result=40 13:27:10 Config A/D Result=40 13:27:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:10 Get A/D filter: -9.255963e+061 result=40 13:27:10 Get A/D value=-858993460 result=40 13:27:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:10 Parameters OK 13:27:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:10 Set A/D data flow result=40 13:27:10 Set A/D channel type result=40 13:27:10 Set A/D encoding result=40 13:27:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:10 Set channel filter=0.000000e+000 result=40 13:27:10 Config A/D Result=40 13:27:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:10 Get A/D filter: -9.255963e+061 result=40 13:27:10 Get A/D value=-858993460 result=40 13:27:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:27:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:27:10 Aux= 13:27:10 Message to Camera, serial 107379 queued 13:27:47 Received message from Master: op=PointingHead serial=107392 13:27:47 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:27:47 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:27:47 Point started: ret=0 13:27:47 point_skyscan result=0 13:27:48 Check angles 13:27:48 SkyScan query 13:27:48 SkyScan query done: ret=0 az=135.84<-9056 ze=-6.51<-12434 Statuses=0009 0008 13:27:48 Msec=0 True Az=135.84 Ze=-6.51 Az status=0009 Ze status=0008 13:27:48 Check angles 13:27:48 SkyScan query 13:27:49 SkyScan query done: ret=0 az=153.705<-10247 ze=-6.51<-12434 Statuses=0009 0008 13:27:49 Msec=750 True Az=153.705 Ze=-6.51 Az status=0009 Ze status=0008 13:27:49 Check angles 13:27:49 SkyScan query 13:27:50 SkyScan query done: ret=0 az=171.54<-11436 ze=-6.495<-12433 Statuses=0009 0008 13:27:50 Msec=1500 True Az=171.54 Ze=-6.495 Az status=0009 Ze status=0008 13:27:50 Check angles 13:27:50 SkyScan query 13:27:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:27:51 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:27:51 Message to Master queued w/err=0: serial=107392 error=0 13:27:56 Received message from Master: op=Filter serial=107393 13:27:56 Color wheel filter change from 0 to 0 13:27:56 FLIGetFilterPos err=0 currentPosition=0 13:27:56 FLIGetStepsRemaining err=0 RemainingSteps=0 13:27:56 Filter is already there-color wheel unchanged 13:27:56 Received message from Master: op=Shutter serial=107394 13:27:56 Shutter LASER close 13:27:56 Received message from Camera: op=State serial=107396 13:27:56 GetSingleValue result=40 Value=cccccccc 13:27:56 SkyScan query 13:27:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:27:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:56 Parameters OK 13:27:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:56 Set A/D data flow result=40 13:27:56 Set A/D channel type result=40 13:27:56 Set A/D encoding result=40 13:27:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:56 Set channel filter=0.000000e+000 result=40 13:27:56 Config A/D Result=40 13:27:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:56 Get A/D filter: -9.255963e+061 result=40 13:27:56 Get A/D value=-858993460 result=40 13:27:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:56 Parameters OK 13:27:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:56 Set A/D data flow result=40 13:27:56 Set A/D channel type result=40 13:27:56 Set A/D encoding result=40 13:27:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:56 Set channel filter=0.000000e+000 result=40 13:27:56 Config A/D Result=40 13:27:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:56 Get A/D filter: -9.255963e+061 result=40 13:27:56 Get A/D value=-858993460 result=40 13:27:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:27:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:27:56 Aux= 13:27:56 Message to Camera, serial 107396 queued 13:28:33 Received message from Master: op=PointingHead serial=107409 13:28:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:28:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:28:33 Point started: ret=0 13:28:33 point_skyscan result=0 13:28:34 Check angles 13:28:34 SkyScan query 13:28:35 SkyScan query done: ret=0 az=153.165<-10211 ze=6.51<-11566 Statuses=0009 0008 13:28:35 Msec=0 True Az=153.165 Ze=6.51 Az status=0009 Ze status=0008 13:28:35 Check angles 13:28:35 SkyScan query 13:28:36 SkyScan query done: ret=0 az=135.675<-9045 ze=6.495<-11567 Statuses=0009 0008 13:28:36 Msec=750 True Az=135.675 Ze=6.495 Az status=0009 Ze status=0008 13:28:36 Check angles 13:28:36 SkyScan query 13:28:36 SkyScan query done: ret=0 az=118.2<-7880 ze=6.495<-11567 Statuses=0009 0008 13:28:36 Msec=1500 True Az=118.2 Ze=6.495 Az status=0009 Ze status=0008 13:28:36 Check angles 13:28:36 SkyScan query 13:28:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:28:37 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:28:37 Message to Master queued w/err=0: serial=107409 error=0 13:28:42 Received message from Master: op=Filter serial=107410 13:28:42 Color wheel filter change from 0 to 0 13:28:42 FLIGetFilterPos err=0 currentPosition=0 13:28:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:42 Filter is already there-color wheel unchanged 13:28:42 Received message from Master: op=Shutter serial=107411 13:28:42 Shutter LASER close 13:28:42 Received message from Camera: op=State serial=107413 13:28:42 GetSingleValue result=40 Value=cccccccc 13:28:42 SkyScan query 13:28:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:28:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:43 Parameters OK 13:28:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:43 Set A/D data flow result=40 13:28:43 Set A/D channel type result=40 13:28:43 Set A/D encoding result=40 13:28:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:43 Set channel filter=0.000000e+000 result=40 13:28:43 Config A/D Result=40 13:28:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:43 Get A/D filter: -9.255963e+061 result=40 13:28:43 Get A/D value=-858993460 result=40 13:28:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:43 Parameters OK 13:28:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:43 Set A/D data flow result=40 13:28:43 Set A/D channel type result=40 13:28:43 Set A/D encoding result=40 13:28:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:43 Set channel filter=0.000000e+000 result=40 13:28:43 Config A/D Result=40 13:28:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:43 Get A/D filter: -9.255963e+061 result=40 13:28:43 Get A/D value=-858993460 result=40 13:28:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:43 Aux= 13:28:43 Message to Camera, serial 107413 queued 13:29:20 Received message from Master: op=PointingHead serial=107426 13:29:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:29:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:29:20 Point started: ret=0 13:29:20 point_skyscan result=0 13:29:21 Check angles 13:29:21 SkyScan query 13:29:21 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.265<-13551 Statuses=0008 0009 13:29:21 Msec=0 True Az=112.98 Ze=-23.265 Az status=0008 Ze status=0009 13:29:22 Check angles 13:29:22 SkyScan query 13:29:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.235<-14949 Statuses=0008 0009 13:29:22 Msec=750 True Az=112.995 Ze=-44.235 Az status=0008 Ze status=0009 13:29:22 Check angles 13:29:22 SkyScan query 13:29:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.145<-16343 Statuses=0008 0009 13:29:23 Msec=1500 True Az=112.995 Ze=-65.145 Az status=0008 Ze status=0009 13:29:23 Check angles 13:29:23 SkyScan query 13:29:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.1<-17740 Statuses=0008 0009 13:29:24 Msec=2250 True Az=112.995 Ze=-86.1 Az status=0008 Ze status=0009 13:29:24 Check angles 13:29:24 SkyScan query 13:29:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.52<-19168 Statuses=0008 0009 13:29:24 Msec=3000 True Az=112.995 Ze=-107.52 Az status=0008 Ze status=0009 13:29:25 Check angles 13:29:25 SkyScan query 13:29:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.46<-20564 Statuses=0008 0009 13:29:25 Msec=3750 True Az=112.995 Ze=-128.46 Az status=0008 Ze status=0009 13:29:25 Check angles 13:29:25 SkyScan query 13:29:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.475<-21965 Statuses=0008 0009 13:29:26 Msec=4500 True Az=112.995 Ze=-149.475 Az status=0008 Ze status=0009 13:29:26 Check angles 13:29:26 SkyScan query 13:29:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.775<-23385 Statuses=0008 0009 13:29:27 Msec=5250 True Az=112.995 Ze=-170.775 Az status=0008 Ze status=0009 13:29:27 Check angles 13:29:27 SkyScan query 13:29:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:29:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:29:27 Message to Master queued w/err=0: serial=107426 error=0 13:29:32 Received message from Master: op=Filter serial=107427 13:29:32 Color wheel filter change from 0 to 0 13:29:32 FLIGetFilterPos err=0 currentPosition=0 13:29:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:29:32 Filter is already there-color wheel unchanged 13:29:33 Received message from Master: op=Shutter serial=107428 13:29:33 Shutter LASER open 13:29:33 Received message from Camera: op=State serial=107430 13:29:33 GetSingleValue result=40 Value=cccccccc 13:29:33 SkyScan query 13:29:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:29:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:33 Parameters OK 13:29:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:33 Set A/D data flow result=40 13:29:33 Set A/D channel type result=40 13:29:33 Set A/D encoding result=40 13:29:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:33 Set channel filter=0.000000e+000 result=40 13:29:33 Config A/D Result=40 13:29:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:33 Get A/D filter: -9.255963e+061 result=40 13:29:33 Get A/D value=-858993460 result=40 13:29:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:33 Parameters OK 13:29:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:33 Set A/D data flow result=40 13:29:33 Set A/D channel type result=40 13:29:33 Set A/D encoding result=40 13:29:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:33 Set channel filter=0.000000e+000 result=40 13:29:33 Config A/D Result=40 13:29:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:33 Get A/D filter: -9.255963e+061 result=40 13:29:33 Get A/D value=-858993460 result=40 13:29:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:29:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:29:33 Aux= 13:29:33 Message to Camera, serial 107430 queued 13:29:42 Received message from Master: op=Shutter serial=107440 13:29:42 Shutter LASER close 13:29:42 Received message from Master: op=PointingHead serial=107444 13:29:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:29:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:29:43 Point started: ret=0 13:29:43 point_skyscan result=0 13:29:43 Check angles 13:29:43 SkyScan query 13:29:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 13:29:44 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 13:29:44 Check angles 13:29:44 SkyScan query 13:29:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.34<-20156 Statuses=0008 0009 13:29:45 Msec=750 True Az=112.995 Ze=-122.34 Az status=0008 Ze status=0009 13:29:45 Check angles 13:29:45 SkyScan query 13:29:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.95<-18730 Statuses=0008 0009 13:29:45 Msec=1500 True Az=112.995 Ze=-100.95 Az status=0008 Ze status=0009 13:29:46 Check angles 13:29:46 SkyScan query 13:29:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.485<-17299 Statuses=0008 0009 13:29:46 Msec=2250 True Az=112.995 Ze=-79.485 Az status=0008 Ze status=0009 13:29:46 Check angles 13:29:46 SkyScan query 13:29:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.56<-15904 Statuses=0008 0009 13:29:47 Msec=3000 True Az=112.995 Ze=-58.56 Az status=0008 Ze status=0009 13:29:47 Check angles 13:29:47 SkyScan query 13:29:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.215<-14481 Statuses=0008 0009 13:29:48 Msec=3750 True Az=112.995 Ze=-37.215 Az status=0008 Ze status=0009 13:29:48 Check angles 13:29:48 SkyScan query 13:29:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.795<-13053 Statuses=0008 0009 13:29:48 Msec=4500 True Az=112.995 Ze=-15.795 Az status=0008 Ze status=0009 13:29:49 Check angles 13:29:49 SkyScan query 13:29:49 SkyScan query done: ret=0 az=112.995<-7533 ze=4.905<-11673 Statuses=0008 0009 13:29:49 Msec=5250 True Az=112.995 Ze=4.905 Az status=0008 Ze status=0009 13:29:49 Check angles 13:29:49 SkyScan query 13:29:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:29:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:29:50 Message to Master queued w/err=0: serial=107444 error=0 13:29:55 Received message from Master: op=Filter serial=107445 13:29:55 Color wheel filter change from 0 to 0 13:29:55 FLIGetFilterPos err=0 currentPosition=0 13:29:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:29:55 Filter is already there-color wheel unchanged 13:29:55 Received message from Master: op=Shutter serial=107446 13:29:55 Shutter LASER close 13:29:55 Received message from Camera: op=State serial=107448 13:29:55 GetSingleValue result=40 Value=cccccccc 13:29:55 SkyScan query 13:29:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:29:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:56 Parameters OK 13:29:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:56 Set A/D data flow result=40 13:29:56 Set A/D channel type result=40 13:29:56 Set A/D encoding result=40 13:29:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:56 Set channel filter=0.000000e+000 result=40 13:29:56 Config A/D Result=40 13:29:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:56 Get A/D filter: -9.255963e+061 result=40 13:29:56 Get A/D value=-858993460 result=40 13:29:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:56 Parameters OK 13:29:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:56 Set A/D data flow result=40 13:29:56 Set A/D channel type result=40 13:29:56 Set A/D encoding result=40 13:29:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:56 Set channel filter=0.000000e+000 result=40 13:29:56 Config A/D Result=40 13:29:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:56 Get A/D filter: -9.255963e+061 result=40 13:29:56 Get A/D value=-858993460 result=40 13:29:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:29:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:29:56 Aux= 13:29:56 Message to Camera, serial 107448 queued 13:30:33 Received message from Master: op=PointingHead serial=107461 13:30:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:30:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:30:33 Point started: ret=0 13:30:33 point_skyscan result=0 13:30:34 Check angles 13:30:34 SkyScan query 13:30:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:30:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:30:34 Message to Master queued w/err=0: serial=107461 error=0 13:30:39 Received message from Master: op=Filter serial=107462 13:30:39 Color wheel filter change from 0 to 0 13:30:39 FLIGetFilterPos err=0 currentPosition=0 13:30:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:30:39 Filter is already there-color wheel unchanged 13:30:40 Received message from Master: op=Shutter serial=107463 13:30:40 Shutter LASER close 13:30:40 Received message from Camera: op=State serial=107465 13:30:40 GetSingleValue result=40 Value=cccccccc 13:30:40 SkyScan query 13:30:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:30:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:40 Parameters OK 13:30:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:40 Set A/D data flow result=40 13:30:40 Set A/D channel type result=40 13:30:40 Set A/D encoding result=40 13:30:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:40 Set channel filter=0.000000e+000 result=40 13:30:40 Config A/D Result=40 13:30:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:40 Get A/D filter: -9.255963e+061 result=40 13:30:40 Get A/D value=-858993460 result=40 13:30:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:40 Parameters OK 13:30:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:40 Set A/D data flow result=40 13:30:40 Set A/D channel type result=40 13:30:40 Set A/D encoding result=40 13:30:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:40 Set channel filter=0.000000e+000 result=40 13:30:40 Config A/D Result=40 13:30:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:40 Get A/D filter: -9.255963e+061 result=40 13:30:40 Get A/D value=-858993460 result=40 13:30:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:30:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:30:40 Aux= 13:30:40 Message to Camera, serial 107465 queued 13:31:17 Received message from Master: op=PointingHead serial=107478 13:31:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:31:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:31:17 Point started: ret=0 13:31:17 point_skyscan result=0 13:31:18 Check angles 13:31:18 SkyScan query 13:31:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:31:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:31:19 Message to Master queued w/err=0: serial=107478 error=0 13:31:24 Received message from Master: op=Filter serial=107479 13:31:24 Color wheel filter change from 0 to 0 13:31:24 FLIGetFilterPos err=0 currentPosition=0 13:31:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:31:24 Filter is already there-color wheel unchanged 13:31:24 Received message from Master: op=Shutter serial=107480 13:31:24 Shutter LASER close 13:31:24 Received message from Camera: op=State serial=107482 13:31:24 GetSingleValue result=40 Value=cccccccc 13:31:24 SkyScan query 13:31:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:31:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:24 Parameters OK 13:31:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:24 Set A/D data flow result=40 13:31:24 Set A/D channel type result=40 13:31:24 Set A/D encoding result=40 13:31:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:24 Set channel filter=0.000000e+000 result=40 13:31:24 Config A/D Result=40 13:31:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:24 Get A/D filter: -9.255963e+061 result=40 13:31:24 Get A/D value=-858993460 result=40 13:31:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:24 Parameters OK 13:31:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:24 Set A/D data flow result=40 13:31:24 Set A/D channel type result=40 13:31:24 Set A/D encoding result=40 13:31:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:24 Set channel filter=0.000000e+000 result=40 13:31:24 Config A/D Result=40 13:31:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:24 Get A/D filter: -9.255963e+061 result=40 13:31:24 Get A/D value=-858993460 result=40 13:31:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:31:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:31:24 Aux= 13:31:24 Message to Camera, serial 107482 queued 13:32:01 Received message from Master: op=PointingHead serial=107495 13:32:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:32:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:32:02 Point started: ret=0 13:32:02 point_skyscan result=0 13:32:02 Check angles 13:32:02 SkyScan query 13:32:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:32:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:32:03 Message to Master queued w/err=0: serial=107495 error=0 13:32:08 Received message from Master: op=Filter serial=107496 13:32:08 Color wheel filter change from 0 to 0 13:32:08 FLIGetFilterPos err=0 currentPosition=0 13:32:08 FLIGetStepsRemaining err=0 RemainingSteps=0 13:32:08 Filter is already there-color wheel unchanged 13:32:08 Received message from Master: op=Shutter serial=107497 13:32:08 Shutter LASER close 13:32:08 Received message from Camera: op=State serial=107499 13:32:08 GetSingleValue result=40 Value=cccccccc 13:32:08 SkyScan query 13:32:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:32:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:09 Parameters OK 13:32:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:09 Set A/D data flow result=40 13:32:09 Set A/D channel type result=40 13:32:09 Set A/D encoding result=40 13:32:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:09 Set channel filter=0.000000e+000 result=40 13:32:09 Config A/D Result=40 13:32:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:09 Get A/D filter: -9.255963e+061 result=40 13:32:09 Get A/D value=-858993460 result=40 13:32:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:09 Parameters OK 13:32:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:09 Set A/D data flow result=40 13:32:09 Set A/D channel type result=40 13:32:09 Set A/D encoding result=40 13:32:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:09 Set channel filter=0.000000e+000 result=40 13:32:09 Config A/D Result=40 13:32:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:09 Get A/D filter: -9.255963e+061 result=40 13:32:09 Get A/D value=-858993460 result=40 13:32:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:32:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:32:09 Aux= 13:32:09 Message to Camera, serial 107499 queued 13:32:46 Received message from Master: op=PointingHead serial=107512 13:32:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:32:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:32:46 Point started: ret=0 13:32:46 point_skyscan result=0 13:32:47 Check angles 13:32:47 SkyScan query 13:32:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.64<-13576 Statuses=0008 0009 13:32:47 Msec=0 True Az=112.995 Ze=-23.64 Az status=0008 Ze status=0009 13:32:48 Check angles 13:32:48 SkyScan query 13:32:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.58<-14972 Statuses=0008 0009 13:32:48 Msec=750 True Az=112.995 Ze=-44.58 Az status=0008 Ze status=0009 13:32:48 Check angles 13:32:48 SkyScan query 13:32:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.97<-16398 Statuses=0008 0009 13:32:49 Msec=1500 True Az=112.995 Ze=-65.97 Az status=0008 Ze status=0009 13:32:49 Check angles 13:32:49 SkyScan query 13:32:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.94<-17796 Statuses=0008 0009 13:32:50 Msec=2250 True Az=112.995 Ze=-86.94 Az status=0008 Ze status=0009 13:32:50 Check angles 13:32:50 SkyScan query 13:32:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.91<-19194 Statuses=0008 0009 13:32:50 Msec=3000 True Az=112.995 Ze=-107.91 Az status=0008 Ze status=0009 13:32:51 Check angles 13:32:51 SkyScan query 13:32:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.865<-20591 Statuses=0008 0009 13:32:51 Msec=3750 True Az=112.995 Ze=-128.865 Az status=0008 Ze status=0009 13:32:51 Check angles 13:32:51 SkyScan query 13:32:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 13:32:52 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 13:32:52 Check angles 13:32:52 SkyScan query 13:32:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.73<-23382 Statuses=0008 0009 13:32:53 Msec=5250 True Az=112.995 Ze=-170.73 Az status=0008 Ze status=0009 13:32:53 Check angles 13:32:53 SkyScan query 13:32:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:32:53 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:32:53 Message to Master queued w/err=0: serial=107512 error=0 13:32:58 Received message from Master: op=Filter serial=107513 13:32:58 Color wheel filter change from 0 to 0 13:32:58 FLIGetFilterPos err=0 currentPosition=0 13:32:58 FLIGetStepsRemaining err=0 RemainingSteps=0 13:32:58 Filter is already there-color wheel unchanged 13:32:59 Received message from Master: op=Shutter serial=107514 13:32:59 Shutter LASER open 13:32:59 Received message from Camera: op=State serial=107516 13:32:59 GetSingleValue result=40 Value=cccccccc 13:32:59 SkyScan query 13:32:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:32:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:59 Parameters OK 13:32:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:59 Set A/D data flow result=40 13:32:59 Set A/D channel type result=40 13:32:59 Set A/D encoding result=40 13:32:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:59 Set channel filter=0.000000e+000 result=40 13:32:59 Config A/D Result=40 13:32:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:59 Get A/D filter: -9.255963e+061 result=40 13:32:59 Get A/D value=-858993460 result=40 13:32:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:59 Parameters OK 13:32:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:59 Set A/D data flow result=40 13:32:59 Set A/D channel type result=40 13:32:59 Set A/D encoding result=40 13:32:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:59 Set channel filter=0.000000e+000 result=40 13:32:59 Config A/D Result=40 13:32:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:59 Get A/D filter: -9.255963e+061 result=40 13:32:59 Get A/D value=-858993460 result=40 13:32:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:32:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:32:59 Aux= 13:32:59 Message to Camera, serial 107516 queued 13:33:08 Received message from Master: op=Shutter serial=107526 13:33:08 Shutter LASER close 13:33:08 Received message from Master: op=PointingHead serial=107530 13:33:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:33:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:33:09 Point started: ret=0 13:33:09 point_skyscan result=0 13:33:09 Check angles 13:33:09 SkyScan query 13:33:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.13<-21542 Statuses=0008 0009 13:33:10 Msec=0 True Az=112.995 Ze=-143.13 Az status=0008 Ze status=0009 13:33:10 Check angles 13:33:10 SkyScan query 13:33:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.16<-20144 Statuses=0008 0009 13:33:11 Msec=750 True Az=112.995 Ze=-122.16 Az status=0008 Ze status=0009 13:33:11 Check angles 13:33:11 SkyScan query 13:33:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.25<-18750 Statuses=0008 0009 13:33:12 Msec=1500 True Az=112.995 Ze=-101.25 Az status=0008 Ze status=0009 13:33:12 Check angles 13:33:12 SkyScan query 13:33:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.265<-17351 Statuses=0008 0009 13:33:12 Msec=2250 True Az=112.995 Ze=-80.265 Az status=0008 Ze status=0009 13:33:12 Check angles 13:33:12 SkyScan query 13:33:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.325<-15955 Statuses=0008 0009 13:33:13 Msec=3000 True Az=112.995 Ze=-59.325 Az status=0008 Ze status=0009 13:33:13 Check angles 13:33:13 SkyScan query 13:33:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.31<-14554 Statuses=0008 0009 13:33:14 Msec=3750 True Az=112.995 Ze=-38.31 Az status=0008 Ze status=0009 13:33:14 Check angles 13:33:14 SkyScan query 13:33:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.385<-13159 Statuses=0008 0009 13:33:15 Msec=4500 True Az=112.995 Ze=-17.385 Az status=0008 Ze status=0009 13:33:15 Check angles 13:33:15 SkyScan query 13:33:15 SkyScan query done: ret=0 az=112.995<-7533 ze=3.615<-11759 Statuses=0008 0009 13:33:15 Msec=5250 True Az=112.995 Ze=3.615 Az status=0008 Ze status=0009 13:33:15 Check angles 13:33:15 SkyScan query 13:33:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:33:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:33:16 Message to Master queued w/err=0: serial=107530 error=0 13:33:21 Received message from Master: op=Filter serial=107531 13:33:21 Color wheel filter change from 0 to 0 13:33:21 FLIGetFilterPos err=0 currentPosition=0 13:33:21 FLIGetStepsRemaining err=0 RemainingSteps=0 13:33:21 Filter is already there-color wheel unchanged 13:33:21 Received message from Master: op=Shutter serial=107532 13:33:21 Shutter LASER close 13:33:21 Received message from Camera: op=State serial=107534 13:33:21 GetSingleValue result=40 Value=cccccccc 13:33:21 SkyScan query 13:33:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:33:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:22 Parameters OK 13:33:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:22 Set A/D data flow result=40 13:33:22 Set A/D channel type result=40 13:33:22 Set A/D encoding result=40 13:33:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:22 Set channel filter=0.000000e+000 result=40 13:33:22 Config A/D Result=40 13:33:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:22 Get A/D filter: -9.255963e+061 result=40 13:33:22 Get A/D value=-858993460 result=40 13:33:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:22 Parameters OK 13:33:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:22 Set A/D data flow result=40 13:33:22 Set A/D channel type result=40 13:33:22 Set A/D encoding result=40 13:33:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:22 Set channel filter=0.000000e+000 result=40 13:33:22 Config A/D Result=40 13:33:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:22 Get A/D filter: -9.255963e+061 result=40 13:33:22 Get A/D value=-858993460 result=40 13:33:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:33:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:33:22 Aux= 13:33:22 Message to Camera, serial 107534 queued 13:33:38 Received message from Master: op=Identify serial=107535 13:33:59 Received message from Master: op=PointingHead serial=107550 13:33:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:33:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:33:59 Point started: ret=0 13:33:59 point_skyscan result=0 13:34:00 Check angles 13:34:00 SkyScan query 13:34:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:34:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:34:01 Message to Master queued w/err=0: serial=107550 error=0 13:34:06 Received message from Master: op=Filter serial=107551 13:34:06 Color wheel filter change from 0 to 0 13:34:06 FLIGetFilterPos err=0 currentPosition=0 13:34:06 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:06 Filter is already there-color wheel unchanged 13:34:06 Received message from Master: op=Shutter serial=107552 13:34:06 Shutter LASER close 13:34:06 Received message from Camera: op=State serial=107554 13:34:06 GetSingleValue result=40 Value=cccccccc 13:34:06 SkyScan query 13:34:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:34:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:06 Parameters OK 13:34:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:06 Set A/D data flow result=40 13:34:06 Set A/D channel type result=40 13:34:06 Set A/D encoding result=40 13:34:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:06 Set channel filter=0.000000e+000 result=40 13:34:06 Config A/D Result=40 13:34:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:06 Get A/D filter: -9.255963e+061 result=40 13:34:06 Get A/D value=-858993460 result=40 13:34:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:06 Parameters OK 13:34:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:06 Set A/D data flow result=40 13:34:06 Set A/D channel type result=40 13:34:06 Set A/D encoding result=40 13:34:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:06 Set channel filter=0.000000e+000 result=40 13:34:06 Config A/D Result=40 13:34:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:06 Get A/D filter: -9.255963e+061 result=40 13:34:06 Get A/D value=-858993460 result=40 13:34:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:06 Aux= 13:34:06 Message to Camera, serial 107554 queued 13:34:43 Received message from Master: op=PointingHead serial=107567 13:34:43 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:34:43 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:34:43 Point started: ret=0 13:34:43 point_skyscan result=0 13:34:44 Check angles 13:34:44 SkyScan query 13:34:45 SkyScan query done: ret=0 az=136.26<-9084 ze=-6.51<-12434 Statuses=0009 0008 13:34:45 Msec=0 True Az=136.26 Ze=-6.51 Az status=0009 Ze status=0008 13:34:45 Check angles 13:34:45 SkyScan query [UTC 2019-3-4 13:34:46] 13:34:46 SkyScan query done: ret=0 az=153.765<-10251 ze=-6.495<-12433 Statuses=0009 0008 13:34:46 Msec=750 True Az=153.765 Ze=-6.495 Az status=0009 Ze status=0008 13:34:46 Check angles 13:34:46 SkyScan query 13:34:46 SkyScan query done: ret=0 az=171.195<-11413 ze=-6.495<-12433 Statuses=0009 0008 13:34:46 Msec=1500 True Az=171.195 Ze=-6.495 Az status=0009 Ze status=0008 13:34:46 Check angles 13:34:46 SkyScan query 13:34:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:34:47 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:34:47 Message to Master queued w/err=0: serial=107567 error=0 13:34:52 Received message from Master: op=Filter serial=107568 13:34:52 Color wheel filter change from 0 to 0 13:34:52 FLIGetFilterPos err=0 currentPosition=0 13:34:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:52 Filter is already there-color wheel unchanged 13:34:52 Received message from Master: op=Shutter serial=107569 13:34:52 Shutter LASER close 13:34:52 Received message from Camera: op=State serial=107571 13:34:52 GetSingleValue result=40 Value=cccccccc 13:34:52 SkyScan query 13:34:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:34:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:53 Parameters OK 13:34:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:53 Set A/D data flow result=40 13:34:53 Set A/D channel type result=40 13:34:53 Set A/D encoding result=40 13:34:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:53 Set channel filter=0.000000e+000 result=40 13:34:53 Config A/D Result=40 13:34:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:53 Get A/D filter: -9.255963e+061 result=40 13:34:53 Get A/D value=-858993460 result=40 13:34:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:53 Parameters OK 13:34:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:53 Set A/D data flow result=40 13:34:53 Set A/D channel type result=40 13:34:53 Set A/D encoding result=40 13:34:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:53 Set channel filter=0.000000e+000 result=40 13:34:53 Config A/D Result=40 13:34:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:53 Get A/D filter: -9.255963e+061 result=40 13:34:53 Get A/D value=-858993460 result=40 13:34:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:53 Aux= 13:34:53 Message to Camera, serial 107571 queued 13:35:30 Received message from Master: op=PointingHead serial=107584 13:35:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:35:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:35:30 Point started: ret=0 13:35:30 point_skyscan result=0 13:35:31 Check angles 13:35:31 SkyScan query 13:35:31 SkyScan query done: ret=0 az=153.09<-10206 ze=6.51<-11566 Statuses=0009 0008 13:35:31 Msec=0 True Az=153.09 Ze=6.51 Az status=0009 Ze status=0008 13:35:32 Check angles 13:35:32 SkyScan query 13:35:32 SkyScan query done: ret=0 az=135.57<-9038 ze=6.495<-11567 Statuses=0009 0008 13:35:32 Msec=750 True Az=135.57 Ze=6.495 Az status=0009 Ze status=0008 13:35:32 Check angles 13:35:32 SkyScan query 13:35:33 SkyScan query done: ret=0 az=117.765<-7851 ze=6.495<-11567 Statuses=0009 0008 13:35:33 Msec=1500 True Az=117.765 Ze=6.495 Az status=0009 Ze status=0008 13:35:33 Check angles 13:35:33 SkyScan query 13:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:35:34 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:35:34 Message to Master queued w/err=0: serial=107584 error=0 13:35:39 Received message from Master: op=Filter serial=107585 13:35:39 Color wheel filter change from 0 to 0 13:35:39 FLIGetFilterPos err=0 currentPosition=0 13:35:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:35:39 Filter is already there-color wheel unchanged 13:35:39 Received message from Master: op=Shutter serial=107586 13:35:39 Shutter LASER close 13:35:39 Received message from Camera: op=State serial=107588 13:35:39 GetSingleValue result=40 Value=cccccccc 13:35:39 SkyScan query 13:35:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:35:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:39 Parameters OK 13:35:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:39 Set A/D data flow result=40 13:35:39 Set A/D channel type result=40 13:35:39 Set A/D encoding result=40 13:35:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:39 Set channel filter=0.000000e+000 result=40 13:35:39 Config A/D Result=40 13:35:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:39 Get A/D filter: -9.255963e+061 result=40 13:35:39 Get A/D value=-858993460 result=40 13:35:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:39 Parameters OK 13:35:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:39 Set A/D data flow result=40 13:35:39 Set A/D channel type result=40 13:35:39 Set A/D encoding result=40 13:35:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:39 Set channel filter=0.000000e+000 result=40 13:35:39 Config A/D Result=40 13:35:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:39 Get A/D filter: -9.255963e+061 result=40 13:35:39 Get A/D value=-858993460 result=40 13:35:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:35:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:35:39 Aux= 13:35:39 Message to Camera, serial 107588 queued 13:36:16 Received message from Master: op=PointingHead serial=107601 13:36:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:36:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:36:17 Point started: ret=0 13:36:17 point_skyscan result=0 13:36:17 Check angles 13:36:17 SkyScan query 13:36:18 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.565<-13571 Statuses=0008 0009 13:36:18 Msec=0 True Az=112.98 Ze=-23.565 Az status=0008 Ze status=0009 13:36:18 Check angles 13:36:18 SkyScan query 13:36:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 13:36:19 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 13:36:19 Check angles 13:36:19 SkyScan query 13:36:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.46<-16364 Statuses=0008 0009 13:36:19 Msec=1500 True Az=112.995 Ze=-65.46 Az status=0008 Ze status=0009 13:36:20 Check angles 13:36:20 SkyScan query 13:36:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.43<-17762 Statuses=0008 0009 13:36:20 Msec=2250 True Az=112.995 Ze=-86.43 Az status=0008 Ze status=0009 13:36:20 Check angles 13:36:20 SkyScan query 13:36:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.37<-19158 Statuses=0008 0009 13:36:21 Msec=3000 True Az=112.995 Ze=-107.37 Az status=0008 Ze status=0009 13:36:21 Check angles 13:36:21 SkyScan query 13:36:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.34<-20556 Statuses=0008 0009 13:36:22 Msec=3750 True Az=112.995 Ze=-128.34 Az status=0008 Ze status=0009 13:36:22 Check angles 13:36:22 SkyScan query 13:36:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.34<-21956 Statuses=0008 0009 13:36:22 Msec=4500 True Az=112.995 Ze=-149.34 Az status=0008 Ze status=0009 13:36:23 Check angles 13:36:23 SkyScan query 13:36:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.265<-23351 Statuses=0008 0009 13:36:23 Msec=5250 True Az=112.995 Ze=-170.265 Az status=0008 Ze status=0009 13:36:23 Check angles 13:36:23 SkyScan query 13:36:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:36:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:36:24 Message to Master queued w/err=0: serial=107601 error=0 13:36:29 Received message from Master: op=Filter serial=107602 13:36:29 Color wheel filter change from 0 to 0 13:36:29 FLIGetFilterPos err=0 currentPosition=0 13:36:29 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:29 Filter is already there-color wheel unchanged 13:36:29 Received message from Master: op=Shutter serial=107603 13:36:29 Shutter LASER open 13:36:29 Received message from Camera: op=State serial=107605 13:36:29 GetSingleValue result=40 Value=cccccccc 13:36:29 SkyScan query 13:36:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:36:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:30 Parameters OK 13:36:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:30 Set A/D data flow result=40 13:36:30 Set A/D channel type result=40 13:36:30 Set A/D encoding result=40 13:36:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:30 Set channel filter=0.000000e+000 result=40 13:36:30 Config A/D Result=40 13:36:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:30 Get A/D filter: -9.255963e+061 result=40 13:36:30 Get A/D value=-858993460 result=40 13:36:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:30 Parameters OK 13:36:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:30 Set A/D data flow result=40 13:36:30 Set A/D channel type result=40 13:36:30 Set A/D encoding result=40 13:36:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:30 Set channel filter=0.000000e+000 result=40 13:36:30 Config A/D Result=40 13:36:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:30 Get A/D filter: -9.255963e+061 result=40 13:36:30 Get A/D value=-858993460 result=40 13:36:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:30 Aux= 13:36:30 Message to Camera, serial 107605 queued 13:36:37 Received message from Master: op=Shutter serial=107614 13:36:37 Shutter LASER close 13:36:38 Received message from Master: op=PointingHead serial=107618 13:36:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:36:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:36:38 Point started: ret=0 13:36:38 point_skyscan result=0 13:36:39 Check angles 13:36:39 SkyScan query 13:36:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 13:36:39 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 13:36:40 Check angles 13:36:40 SkyScan query 13:36:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.13<-20142 Statuses=0008 0009 13:36:40 Msec=750 True Az=112.995 Ze=-122.13 Az status=0008 Ze status=0009 13:36:40 Check angles 13:36:40 SkyScan query 13:36:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.22<-18748 Statuses=0008 0009 13:36:41 Msec=1500 True Az=112.995 Ze=-101.22 Az status=0008 Ze status=0009 13:36:41 Check angles 13:36:41 SkyScan query 13:36:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.235<-17349 Statuses=0008 0009 13:36:42 Msec=2250 True Az=112.995 Ze=-80.235 Az status=0008 Ze status=0009 13:36:42 Check angles 13:36:42 SkyScan query 13:36:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.28<-15952 Statuses=0008 0009 13:36:42 Msec=3000 True Az=112.995 Ze=-59.28 Az status=0008 Ze status=0009 13:36:43 Check angles 13:36:43 SkyScan query 13:36:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.265<-14551 Statuses=0008 0009 13:36:43 Msec=3750 True Az=112.995 Ze=-38.265 Az status=0008 Ze status=0009 13:36:43 Check angles 13:36:43 SkyScan query 13:36:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.325<-13155 Statuses=0008 0009 13:36:44 Msec=4500 True Az=112.995 Ze=-17.325 Az status=0008 Ze status=0009 13:36:44 Check angles 13:36:44 SkyScan query 13:36:45 SkyScan query done: ret=0 az=112.995<-7533 ze=3.645<-11757 Statuses=0008 0009 13:36:45 Msec=5250 True Az=112.995 Ze=3.645 Az status=0008 Ze status=0009 13:36:45 Check angles 13:36:45 SkyScan query 13:36:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:36:45 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:36:45 Message to Master queued w/err=0: serial=107618 error=0 13:36:50 Received message from Master: op=Filter serial=107619 13:36:50 Color wheel filter change from 0 to 0 13:36:50 FLIGetFilterPos err=0 currentPosition=0 13:36:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:50 Filter is already there-color wheel unchanged 13:36:51 Received message from Master: op=Shutter serial=107620 13:36:51 Shutter LASER close 13:36:51 Received message from Camera: op=State serial=107622 13:36:51 GetSingleValue result=40 Value=cccccccc 13:36:51 SkyScan query 13:36:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:36:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:51 Parameters OK 13:36:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:51 Set A/D data flow result=40 13:36:51 Set A/D channel type result=40 13:36:51 Set A/D encoding result=40 13:36:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:51 Set channel filter=0.000000e+000 result=40 13:36:51 Config A/D Result=40 13:36:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:51 Get A/D filter: -9.255963e+061 result=40 13:36:51 Get A/D value=-858993460 result=40 13:36:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:51 Parameters OK 13:36:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:51 Set A/D data flow result=40 13:36:51 Set A/D channel type result=40 13:36:51 Set A/D encoding result=40 13:36:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:51 Set channel filter=0.000000e+000 result=40 13:36:51 Config A/D Result=40 13:36:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:51 Get A/D filter: -9.255963e+061 result=40 13:36:51 Get A/D value=-858993460 result=40 13:36:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:51 Aux= 13:36:51 Message to Camera, serial 107622 queued 13:37:27 Received message from Master: op=PointingHead serial=107634 13:37:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:37:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:37:28 Point started: ret=0 13:37:28 point_skyscan result=0 13:37:28 Check angles 13:37:28 SkyScan query 13:37:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:37:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:37:29 Message to Master queued w/err=0: serial=107634 error=0 13:37:34 Received message from Master: op=Filter serial=107635 13:37:34 Color wheel filter change from 0 to 0 13:37:34 FLIGetFilterPos err=0 currentPosition=0 13:37:34 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:34 Filter is already there-color wheel unchanged 13:37:34 Received message from Master: op=Shutter serial=107636 13:37:34 Shutter LASER close 13:37:34 Received message from Camera: op=State serial=107638 13:37:34 GetSingleValue result=40 Value=cccccccc 13:37:34 SkyScan query 13:37:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:37:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:35 Parameters OK 13:37:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:35 Set A/D data flow result=40 13:37:35 Set A/D channel type result=40 13:37:35 Set A/D encoding result=40 13:37:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:35 Set channel filter=0.000000e+000 result=40 13:37:35 Config A/D Result=40 13:37:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:35 Get A/D filter: -9.255963e+061 result=40 13:37:35 Get A/D value=-858993460 result=40 13:37:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:35 Parameters OK 13:37:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:35 Set A/D data flow result=40 13:37:35 Set A/D channel type result=40 13:37:35 Set A/D encoding result=40 13:37:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:35 Set channel filter=0.000000e+000 result=40 13:37:35 Config A/D Result=40 13:37:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:35 Get A/D filter: -9.255963e+061 result=40 13:37:35 Get A/D value=-858993460 result=40 13:37:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:35 Aux= 13:37:35 Message to Camera, serial 107638 queued 13:38:12 Received message from Master: op=PointingHead serial=107651 13:38:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:38:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:38:12 Point started: ret=0 13:38:12 point_skyscan result=0 13:38:13 Check angles 13:38:13 SkyScan query 13:38:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:38:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:38:13 Message to Master queued w/err=0: serial=107651 error=0 13:38:18 Received message from Master: op=Filter serial=107652 13:38:18 Color wheel filter change from 0 to 0 13:38:18 FLIGetFilterPos err=0 currentPosition=0 13:38:18 FLIGetStepsRemaining err=0 RemainingSteps=0 13:38:18 Filter is already there-color wheel unchanged 13:38:18 Received message from Master: op=Shutter serial=107653 13:38:18 Shutter LASER close 13:38:19 Received message from Camera: op=State serial=107655 13:38:19 GetSingleValue result=40 Value=cccccccc 13:38:19 SkyScan query 13:38:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:38:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:19 Parameters OK 13:38:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:19 Set A/D data flow result=40 13:38:19 Set A/D channel type result=40 13:38:19 Set A/D encoding result=40 13:38:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:19 Set channel filter=0.000000e+000 result=40 13:38:19 Config A/D Result=40 13:38:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:19 Get A/D filter: -9.255963e+061 result=40 13:38:19 Get A/D value=-858993460 result=40 13:38:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:19 Parameters OK 13:38:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:19 Set A/D data flow result=40 13:38:19 Set A/D channel type result=40 13:38:19 Set A/D encoding result=40 13:38:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:19 Set channel filter=0.000000e+000 result=40 13:38:19 Config A/D Result=40 13:38:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:19 Get A/D filter: -9.255963e+061 result=40 13:38:19 Get A/D value=-858993460 result=40 13:38:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:38:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:38:19 Aux= 13:38:19 Message to Camera, serial 107655 queued 13:38:56 Received message from Master: op=PointingHead serial=107668 13:38:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:38:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:38:56 Point started: ret=0 13:38:56 point_skyscan result=0 13:38:57 Check angles 13:38:57 SkyScan query 13:38:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:38:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:38:58 Message to Master queued w/err=0: serial=107668 error=0 13:39:03 Received message from Master: op=Filter serial=107669 13:39:03 Color wheel filter change from 0 to 0 13:39:03 FLIGetFilterPos err=0 currentPosition=0 13:39:03 FLIGetStepsRemaining err=0 RemainingSteps=0 13:39:03 Filter is already there-color wheel unchanged 13:39:03 Received message from Master: op=Shutter serial=107670 13:39:03 Shutter LASER close 13:39:03 Received message from Camera: op=State serial=107672 13:39:03 GetSingleValue result=40 Value=cccccccc 13:39:03 SkyScan query 13:39:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:39:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:03 Parameters OK 13:39:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:03 Set A/D data flow result=40 13:39:03 Set A/D channel type result=40 13:39:03 Set A/D encoding result=40 13:39:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:03 Set channel filter=0.000000e+000 result=40 13:39:03 Config A/D Result=40 13:39:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:03 Get A/D filter: -9.255963e+061 result=40 13:39:03 Get A/D value=-858993460 result=40 13:39:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:03 Parameters OK 13:39:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:03 Set A/D data flow result=40 13:39:03 Set A/D channel type result=40 13:39:03 Set A/D encoding result=40 13:39:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:03 Set channel filter=0.000000e+000 result=40 13:39:03 Config A/D Result=40 13:39:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:03 Get A/D filter: -9.255963e+061 result=40 13:39:03 Get A/D value=-858993460 result=40 13:39:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:39:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:39:03 Aux= 13:39:03 Message to Camera, serial 107672 queued 13:39:40 Received message from Master: op=PointingHead serial=107685 13:39:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:39:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:39:41 Point started: ret=0 13:39:41 point_skyscan result=0 13:39:41 Check angles 13:39:41 SkyScan query 13:39:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 13:39:42 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 13:39:42 Check angles 13:39:42 SkyScan query 13:39:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.07<-14938 Statuses=0008 0009 13:39:43 Msec=750 True Az=112.995 Ze=-44.07 Az status=0008 Ze status=0009 13:39:43 Check angles 13:39:43 SkyScan query 13:39:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 13:39:43 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 13:39:44 Check angles 13:39:44 SkyScan query 13:39:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 13:39:44 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 13:39:44 Check angles 13:39:44 SkyScan query 13:39:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.28<-19152 Statuses=0008 0009 13:39:45 Msec=3000 True Az=112.995 Ze=-107.28 Az status=0008 Ze status=0009 13:39:45 Check angles 13:39:45 SkyScan query 13:39:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.715<-20581 Statuses=0008 0009 13:39:46 Msec=3750 True Az=112.995 Ze=-128.715 Az status=0008 Ze status=0009 13:39:46 Check angles 13:39:46 SkyScan query 13:39:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 13:39:46 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 13:39:47 Check angles 13:39:47 SkyScan query 13:39:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.61<-23374 Statuses=0008 0009 13:39:47 Msec=5250 True Az=112.995 Ze=-170.61 Az status=0008 Ze status=0009 13:39:47 Check angles 13:39:47 SkyScan query 13:39:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:39:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:39:48 Message to Master queued w/err=0: serial=107685 error=0 13:39:53 Received message from Master: op=Filter serial=107686 13:39:53 Color wheel filter change from 0 to 0 13:39:53 FLIGetFilterPos err=0 currentPosition=0 13:39:53 FLIGetStepsRemaining err=0 RemainingSteps=0 13:39:53 Filter is already there-color wheel unchanged 13:39:53 Received message from Master: op=Shutter serial=107687 13:39:53 Shutter LASER open 13:39:53 Received message from Camera: op=State serial=107689 13:39:53 GetSingleValue result=40 Value=cccccccc 13:39:53 SkyScan query 13:39:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:39:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:54 Parameters OK 13:39:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:54 Set A/D data flow result=40 13:39:54 Set A/D channel type result=40 13:39:54 Set A/D encoding result=40 13:39:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:54 Set channel filter=0.000000e+000 result=40 13:39:54 Config A/D Result=40 13:39:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:54 Get A/D filter: -9.255963e+061 result=40 13:39:54 Get A/D value=-858993460 result=40 13:39:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:54 Parameters OK 13:39:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:54 Set A/D data flow result=40 13:39:54 Set A/D channel type result=40 13:39:54 Set A/D encoding result=40 13:39:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:54 Set channel filter=0.000000e+000 result=40 13:39:54 Config A/D Result=40 13:39:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:54 Get A/D filter: -9.255963e+061 result=40 13:39:54 Get A/D value=-858993460 result=40 13:39:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:39:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:39:54 Aux= 13:39:54 Message to Camera, serial 107689 queued 13:40:02 Received message from Master: op=Shutter serial=107699 13:40:02 Shutter LASER close 13:40:03 Received message from Master: op=PointingHead serial=107703 13:40:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:40:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:40:03 Point started: ret=0 13:40:03 point_skyscan result=0 13:40:04 Check angles 13:40:04 SkyScan query 13:40:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.025<-21535 Statuses=0008 0009 13:40:05 Msec=0 True Az=112.995 Ze=-143.025 Az status=0008 Ze status=0009 13:40:05 Check angles 13:40:05 SkyScan query 13:40:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.575<-20105 Statuses=0008 0009 13:40:05 Msec=750 True Az=112.995 Ze=-121.575 Az status=0008 Ze status=0009 13:40:05 Check angles 13:40:05 SkyScan query 13:40:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.62<-18708 Statuses=0008 0009 13:40:06 Msec=1500 True Az=112.995 Ze=-100.62 Az status=0008 Ze status=0009 13:40:06 Check angles 13:40:06 SkyScan query 13:40:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.665<-17311 Statuses=0008 0009 13:40:07 Msec=2250 True Az=112.995 Ze=-79.665 Az status=0008 Ze status=0009 13:40:07 Check angles 13:40:07 SkyScan query 13:40:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 13:40:08 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 13:40:08 Check angles 13:40:08 SkyScan query 13:40:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.74<-14516 Statuses=0008 0009 13:40:08 Msec=3750 True Az=112.995 Ze=-37.74 Az status=0008 Ze status=0009 13:40:08 Check angles 13:40:08 SkyScan query 13:40:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.785<-13119 Statuses=0008 0009 13:40:09 Msec=4500 True Az=112.995 Ze=-16.785 Az status=0008 Ze status=0009 13:40:09 Check angles 13:40:09 SkyScan query 13:40:10 SkyScan query done: ret=0 az=112.995<-7533 ze=4.125<-11725 Statuses=0008 0009 13:40:10 Msec=5250 True Az=112.995 Ze=4.125 Az status=0008 Ze status=0009 13:40:10 Check angles 13:40:10 SkyScan query 13:40:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:40:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:40:11 Message to Master queued w/err=0: serial=107703 error=0 13:40:16 Received message from Master: op=Filter serial=107704 13:40:16 Color wheel filter change from 0 to 0 13:40:16 FLIGetFilterPos err=0 currentPosition=0 13:40:16 FLIGetStepsRemaining err=0 RemainingSteps=0 13:40:16 Filter is already there-color wheel unchanged 13:40:16 Received message from Master: op=Shutter serial=107705 13:40:16 Shutter LASER close 13:40:16 Received message from Camera: op=State serial=107707 13:40:16 GetSingleValue result=40 Value=cccccccc 13:40:16 SkyScan query 13:40:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:40:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:16 Parameters OK 13:40:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:16 Set A/D data flow result=40 13:40:16 Set A/D channel type result=40 13:40:16 Set A/D encoding result=40 13:40:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:16 Set channel filter=0.000000e+000 result=40 13:40:16 Config A/D Result=40 13:40:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:16 Get A/D filter: -9.255963e+061 result=40 13:40:16 Get A/D value=-858993460 result=40 13:40:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:16 Parameters OK 13:40:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:16 Set A/D data flow result=40 13:40:16 Set A/D channel type result=40 13:40:16 Set A/D encoding result=40 13:40:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:16 Set channel filter=0.000000e+000 result=40 13:40:16 Config A/D Result=40 13:40:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:16 Get A/D filter: -9.255963e+061 result=40 13:40:16 Get A/D value=-858993460 result=40 13:40:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:40:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:40:16 Aux= 13:40:16 Message to Camera, serial 107707 queued 13:40:53 Received message from Master: op=PointingHead serial=107720 13:40:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:40:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:40:54 Point started: ret=0 13:40:54 point_skyscan result=0 13:40:54 Check angles 13:40:54 SkyScan query 13:40:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:40:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:40:55 Message to Master queued w/err=0: serial=107720 error=0 13:41:00 Received message from Master: op=Filter serial=107721 13:41:00 Color wheel filter change from 0 to 0 13:41:00 FLIGetFilterPos err=0 currentPosition=0 13:41:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:00 Filter is already there-color wheel unchanged 13:41:00 Received message from Master: op=Shutter serial=107722 13:41:00 Shutter LASER close 13:41:00 Received message from Camera: op=State serial=107724 13:41:00 GetSingleValue result=40 Value=cccccccc 13:41:00 SkyScan query 13:41:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:41:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:01 Parameters OK 13:41:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:01 Set A/D data flow result=40 13:41:01 Set A/D channel type result=40 13:41:01 Set A/D encoding result=40 13:41:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:01 Set channel filter=0.000000e+000 result=40 13:41:01 Config A/D Result=40 13:41:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:01 Get A/D filter: -9.255963e+061 result=40 13:41:01 Get A/D value=-858993460 result=40 13:41:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:01 Parameters OK 13:41:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:01 Set A/D data flow result=40 13:41:01 Set A/D channel type result=40 13:41:01 Set A/D encoding result=40 13:41:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:01 Set channel filter=0.000000e+000 result=40 13:41:01 Config A/D Result=40 13:41:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:01 Get A/D filter: -9.255963e+061 result=40 13:41:01 Get A/D value=-858993460 result=40 13:41:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:01 Aux= 13:41:01 Message to Camera, serial 107724 queued 13:41:38 Received message from Master: op=PointingHead serial=107737 13:41:38 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:41:38 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:41:38 Point started: ret=0 13:41:38 point_skyscan result=0 13:41:39 Check angles 13:41:39 SkyScan query 13:41:39 SkyScan query done: ret=0 az=135.975<-9065 ze=-6.51<-12434 Statuses=0009 0008 13:41:39 Msec=0 True Az=135.975 Ze=-6.51 Az status=0009 Ze status=0008 13:41:39 Check angles 13:41:39 SkyScan query 13:41:40 SkyScan query done: ret=0 az=153.48<-10232 ze=-6.51<-12434 Statuses=0009 0008 13:41:40 Msec=750 True Az=153.48 Ze=-6.51 Az status=0009 Ze status=0008 13:41:40 Check angles 13:41:40 SkyScan query 13:41:41 SkyScan query done: ret=0 az=170.895<-11393 ze=-6.495<-12433 Statuses=0009 0008 13:41:41 Msec=1500 True Az=170.895 Ze=-6.495 Az status=0009 Ze status=0008 13:41:41 Check angles 13:41:41 SkyScan query 13:41:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:41:41 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:41:41 Message to Master queued w/err=0: serial=107737 error=0 13:41:46 Received message from Master: op=Filter serial=107738 13:41:46 Color wheel filter change from 0 to 0 13:41:46 FLIGetFilterPos err=0 currentPosition=0 13:41:46 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:46 Filter is already there-color wheel unchanged 13:41:47 Received message from Master: op=Shutter serial=107739 13:41:47 Shutter LASER close 13:41:47 Received message from Camera: op=State serial=107741 13:41:47 GetSingleValue result=40 Value=cccccccc 13:41:47 SkyScan query 13:41:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:41:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:47 Parameters OK 13:41:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:47 Set A/D data flow result=40 13:41:47 Set A/D channel type result=40 13:41:47 Set A/D encoding result=40 13:41:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:47 Set channel filter=0.000000e+000 result=40 13:41:47 Config A/D Result=40 13:41:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:47 Get A/D filter: -9.255963e+061 result=40 13:41:47 Get A/D value=-858993460 result=40 13:41:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:47 Parameters OK 13:41:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:47 Set A/D data flow result=40 13:41:47 Set A/D channel type result=40 13:41:47 Set A/D encoding result=40 13:41:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:47 Set channel filter=0.000000e+000 result=40 13:41:47 Config A/D Result=40 13:41:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:47 Get A/D filter: -9.255963e+061 result=40 13:41:47 Get A/D value=-858993460 result=40 13:41:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:47 Aux= 13:41:47 Message to Camera, serial 107741 queued 13:42:24 Received message from Master: op=PointingHead serial=107754 13:42:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:42:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:42:25 Point started: ret=0 13:42:25 point_skyscan result=0 13:42:25 Check angles 13:42:25 SkyScan query 13:42:26 SkyScan query done: ret=0 az=152.865<-10191 ze=6.51<-11566 Statuses=0009 0008 13:42:26 Msec=0 True Az=152.865 Ze=6.51 Az status=0009 Ze status=0008 13:42:26 Check angles 13:42:26 SkyScan query 13:42:27 SkyScan query done: ret=0 az=135.33<-9022 ze=6.495<-11567 Statuses=0009 0008 13:42:27 Msec=750 True Az=135.33 Ze=6.495 Az status=0009 Ze status=0008 13:42:27 Check angles 13:42:27 SkyScan query 13:42:27 SkyScan query done: ret=0 az=117.555<-7837 ze=6.495<-11567 Statuses=0009 0008 13:42:27 Msec=1500 True Az=117.555 Ze=6.495 Az status=0009 Ze status=0008 13:42:28 Check angles 13:42:28 SkyScan query 13:42:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:42:28 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:42:28 Message to Master queued w/err=0: serial=107754 error=0 13:42:33 Received message from Master: op=Filter serial=107755 13:42:33 Color wheel filter change from 0 to 0 13:42:33 FLIGetFilterPos err=0 currentPosition=0 13:42:33 FLIGetStepsRemaining err=0 RemainingSteps=0 13:42:33 Filter is already there-color wheel unchanged 13:42:33 Received message from Master: op=Shutter serial=107756 13:42:33 Shutter LASER close 13:42:33 Received message from Camera: op=State serial=107758 13:42:33 GetSingleValue result=40 Value=cccccccc 13:42:33 SkyScan query 13:42:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:42:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:34 Parameters OK 13:42:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:34 Set A/D data flow result=40 13:42:34 Set A/D channel type result=40 13:42:34 Set A/D encoding result=40 13:42:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:34 Set channel filter=0.000000e+000 result=40 13:42:34 Config A/D Result=40 13:42:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:34 Get A/D filter: -9.255963e+061 result=40 13:42:34 Get A/D value=-858993460 result=40 13:42:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:34 Parameters OK 13:42:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:34 Set A/D data flow result=40 13:42:34 Set A/D channel type result=40 13:42:34 Set A/D encoding result=40 13:42:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:34 Set channel filter=0.000000e+000 result=40 13:42:34 Config A/D Result=40 13:42:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:34 Get A/D filter: -9.255963e+061 result=40 13:42:34 Get A/D value=-858993460 result=40 13:42:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:42:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:42:34 Aux= 13:42:34 Message to Camera, serial 107758 queued 13:43:11 Received message from Master: op=PointingHead serial=107771 13:43:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:43:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:43:11 Point started: ret=0 13:43:11 point_skyscan result=0 13:43:12 Check angles 13:43:12 SkyScan query 13:43:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.625<-13575 Statuses=0008 0009 13:43:12 Msec=0 True Az=112.995 Ze=-23.625 Az status=0008 Ze status=0009 13:43:13 Check angles 13:43:13 SkyScan query 13:43:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 13:43:13 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 13:43:13 Check angles 13:43:13 SkyScan query 13:43:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.985<-16399 Statuses=0008 0009 13:43:14 Msec=1500 True Az=112.995 Ze=-65.985 Az status=0008 Ze status=0009 13:43:14 Check angles 13:43:14 SkyScan query 13:43:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.955<-17797 Statuses=0008 0009 13:43:15 Msec=2250 True Az=112.995 Ze=-86.955 Az status=0008 Ze status=0009 13:43:15 Check angles 13:43:15 SkyScan query 13:43:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.955<-19197 Statuses=0008 0009 13:43:15 Msec=3000 True Az=112.995 Ze=-107.955 Az status=0008 Ze status=0009 13:43:16 Check angles 13:43:16 SkyScan query 13:43:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.85<-20590 Statuses=0008 0009 13:43:16 Msec=3750 True Az=112.995 Ze=-128.85 Az status=0008 Ze status=0009 13:43:16 Check angles 13:43:16 SkyScan query 13:43:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 13:43:17 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 13:43:17 Check angles 13:43:17 SkyScan query 13:43:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.73<-23382 Statuses=0008 0009 13:43:18 Msec=5250 True Az=112.995 Ze=-170.73 Az status=0008 Ze status=0009 13:43:18 Check angles 13:43:18 SkyScan query 13:43:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:43:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:43:18 Message to Master queued w/err=0: serial=107771 error=0 13:43:23 Received message from Master: op=Filter serial=107772 13:43:23 Color wheel filter change from 0 to 0 13:43:23 FLIGetFilterPos err=0 currentPosition=0 13:43:23 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:23 Filter is already there-color wheel unchanged 13:43:24 Received message from Master: op=Shutter serial=107773 13:43:24 Shutter LASER open 13:43:24 Received message from Camera: op=State serial=107775 13:43:24 GetSingleValue result=40 Value=cccccccc 13:43:24 SkyScan query 13:43:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:43:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:24 Parameters OK 13:43:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:24 Set A/D data flow result=40 13:43:24 Set A/D channel type result=40 13:43:24 Set A/D encoding result=40 13:43:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:24 Set channel filter=0.000000e+000 result=40 13:43:24 Config A/D Result=40 13:43:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:24 Get A/D filter: -9.255963e+061 result=40 13:43:24 Get A/D value=-858993460 result=40 13:43:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:24 Parameters OK 13:43:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:24 Set A/D data flow result=40 13:43:24 Set A/D channel type result=40 13:43:24 Set A/D encoding result=40 13:43:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:24 Set channel filter=0.000000e+000 result=40 13:43:24 Config A/D Result=40 13:43:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:24 Get A/D filter: -9.255963e+061 result=40 13:43:24 Get A/D value=-858993460 result=40 13:43:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:24 Aux= 13:43:24 Message to Camera, serial 107775 queued 13:43:33 Received message from Master: op=Shutter serial=107785 13:43:33 Shutter LASER close 13:43:33 Received message from Master: op=PointingHead serial=107789 13:43:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:43:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:43:34 Point started: ret=0 13:43:34 point_skyscan result=0 13:43:34 Check angles 13:43:34 SkyScan query 13:43:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.74<-21516 Statuses=0008 0009 13:43:35 Msec=0 True Az=112.995 Ze=-142.74 Az status=0008 Ze status=0009 13:43:35 Check angles 13:43:35 SkyScan query 13:43:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.695<-20113 Statuses=0008 0009 13:43:36 Msec=750 True Az=112.995 Ze=-121.695 Az status=0008 Ze status=0009 13:43:36 Check angles 13:43:36 SkyScan query 13:43:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.32<-18688 Statuses=0008 0009 13:43:36 Msec=1500 True Az=112.995 Ze=-100.32 Az status=0008 Ze status=0009 13:43:37 Check angles 13:43:37 SkyScan query 13:43:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.35<-17290 Statuses=0008 0009 13:43:37 Msec=2250 True Az=112.995 Ze=-79.35 Az status=0008 Ze status=0009 13:43:37 Check angles 13:43:37 SkyScan query 13:43:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.41<-15894 Statuses=0008 0009 13:43:38 Msec=3000 True Az=112.995 Ze=-58.41 Az status=0008 Ze status=0009 13:43:38 Check angles 13:43:38 SkyScan query 13:43:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.11<-14474 Statuses=0008 0009 13:43:39 Msec=3750 True Az=112.995 Ze=-37.11 Az status=0008 Ze status=0009 13:43:39 Check angles 13:43:39 SkyScan query 13:43:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.11<-13074 Statuses=0008 0009 13:43:39 Msec=4500 True Az=112.995 Ze=-16.11 Az status=0008 Ze status=0009 13:43:40 Check angles 13:43:40 SkyScan query 13:43:40 SkyScan query done: ret=0 az=112.995<-7533 ze=4.65<-11690 Statuses=0008 0009 13:43:40 Msec=5250 True Az=112.995 Ze=4.65 Az status=0008 Ze status=0009 13:43:40 Check angles 13:43:40 SkyScan query 13:43:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:43:41 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:43:41 Message to Master queued w/err=0: serial=107789 error=0 13:43:46 Received message from Master: op=Filter serial=107790 13:43:46 Color wheel filter change from 0 to 0 13:43:46 FLIGetFilterPos err=0 currentPosition=0 13:43:46 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:46 Filter is already there-color wheel unchanged 13:43:46 Received message from Master: op=Shutter serial=107791 13:43:46 Shutter LASER close 13:43:46 Received message from Camera: op=State serial=107793 13:43:46 GetSingleValue result=40 Value=cccccccc 13:43:46 SkyScan query 13:43:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:43:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:47 Parameters OK 13:43:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:47 Set A/D data flow result=40 13:43:47 Set A/D channel type result=40 13:43:47 Set A/D encoding result=40 13:43:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:47 Set channel filter=0.000000e+000 result=40 13:43:47 Config A/D Result=40 13:43:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:47 Get A/D filter: -9.255963e+061 result=40 13:43:47 Get A/D value=-858993460 result=40 13:43:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:47 Parameters OK 13:43:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:47 Set A/D data flow result=40 13:43:47 Set A/D channel type result=40 13:43:47 Set A/D encoding result=40 13:43:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:47 Set channel filter=0.000000e+000 result=40 13:43:47 Config A/D Result=40 13:43:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:47 Get A/D filter: -9.255963e+061 result=40 13:43:47 Get A/D value=-858993460 result=40 13:43:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:47 Aux= 13:43:47 Message to Camera, serial 107793 queued [UTC 2019-3-4 13:43:50] 13:44:24 Received message from Master: op=PointingHead serial=107806 13:44:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:44:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:44:24 Point started: ret=0 13:44:24 point_skyscan result=0 13:44:25 Check angles 13:44:25 SkyScan query 13:44:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:44:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:44:25 Message to Master queued w/err=0: serial=107806 error=0 13:44:30 Received message from Master: op=Filter serial=107807 13:44:30 Color wheel filter change from 0 to 0 13:44:30 FLIGetFilterPos err=0 currentPosition=0 13:44:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:30 Filter is already there-color wheel unchanged 13:44:31 Received message from Master: op=Shutter serial=107808 13:44:31 Shutter LASER close 13:44:31 Received message from Camera: op=State serial=107810 13:44:31 GetSingleValue result=40 Value=cccccccc 13:44:31 SkyScan query 13:44:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:44:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:31 Parameters OK 13:44:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:31 Set A/D data flow result=40 13:44:31 Set A/D channel type result=40 13:44:31 Set A/D encoding result=40 13:44:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:31 Set channel filter=0.000000e+000 result=40 13:44:31 Config A/D Result=40 13:44:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:31 Get A/D filter: -9.255963e+061 result=40 13:44:31 Get A/D value=-858993460 result=40 13:44:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:31 Parameters OK 13:44:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:31 Set A/D data flow result=40 13:44:31 Set A/D channel type result=40 13:44:31 Set A/D encoding result=40 13:44:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:31 Set channel filter=0.000000e+000 result=40 13:44:31 Config A/D Result=40 13:44:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:31 Get A/D filter: -9.255963e+061 result=40 13:44:31 Get A/D value=-858993460 result=40 13:44:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:31 Aux= 13:44:31 Message to Camera, serial 107810 queued 13:45:08 Received message from Master: op=PointingHead serial=107823 13:45:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:45:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:45:08 Point started: ret=0 13:45:08 point_skyscan result=0 13:45:09 Check angles 13:45:09 SkyScan query 13:45:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:45:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:45:10 Message to Master queued w/err=0: serial=107823 error=0 13:45:15 Received message from Master: op=Filter serial=107824 13:45:15 Color wheel filter change from 0 to 0 13:45:15 FLIGetFilterPos err=0 currentPosition=0 13:45:15 FLIGetStepsRemaining err=0 RemainingSteps=0 13:45:15 Filter is already there-color wheel unchanged 13:45:15 Received message from Master: op=Shutter serial=107825 13:45:15 Shutter LASER close 13:45:15 Received message from Camera: op=State serial=107827 13:45:15 GetSingleValue result=40 Value=cccccccc 13:45:15 SkyScan query 13:45:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:45:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:16 Parameters OK 13:45:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:16 Set A/D data flow result=40 13:45:16 Set A/D channel type result=40 13:45:16 Set A/D encoding result=40 13:45:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:16 Set channel filter=0.000000e+000 result=40 13:45:16 Config A/D Result=40 13:45:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:16 Get A/D filter: -9.255963e+061 result=40 13:45:16 Get A/D value=-858993460 result=40 13:45:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:16 Parameters OK 13:45:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:16 Set A/D data flow result=40 13:45:16 Set A/D channel type result=40 13:45:16 Set A/D encoding result=40 13:45:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:16 Set channel filter=0.000000e+000 result=40 13:45:16 Config A/D Result=40 13:45:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:16 Get A/D filter: -9.255963e+061 result=40 13:45:16 Get A/D value=-858993460 result=40 13:45:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:45:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:45:16 Aux= 13:45:16 Message to Camera, serial 107827 queued 13:45:52 Received message from Master: op=PointingHead serial=107840 13:45:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:45:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:45:53 Point started: ret=0 13:45:53 point_skyscan result=0 13:45:53 Check angles 13:45:53 SkyScan query 13:45:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:45:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:45:54 Message to Master queued w/err=0: serial=107840 error=0 13:45:59 Received message from Master: op=Filter serial=107841 13:45:59 Color wheel filter change from 0 to 0 13:45:59 FLIGetFilterPos err=0 currentPosition=0 13:45:59 FLIGetStepsRemaining err=0 RemainingSteps=0 13:45:59 Filter is already there-color wheel unchanged 13:45:59 Received message from Master: op=Shutter serial=107842 13:45:59 Shutter LASER close 13:45:59 Received message from Camera: op=State serial=107844 13:45:59 GetSingleValue result=40 Value=cccccccc 13:45:59 SkyScan query 13:46:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:46:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:00 Parameters OK 13:46:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:00 Set A/D data flow result=40 13:46:00 Set A/D channel type result=40 13:46:00 Set A/D encoding result=40 13:46:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:00 Set channel filter=0.000000e+000 result=40 13:46:00 Config A/D Result=40 13:46:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:00 Get A/D filter: -9.255963e+061 result=40 13:46:00 Get A/D value=-858993460 result=40 13:46:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:00 Parameters OK 13:46:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:00 Set A/D data flow result=40 13:46:00 Set A/D channel type result=40 13:46:00 Set A/D encoding result=40 13:46:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:00 Set channel filter=0.000000e+000 result=40 13:46:00 Config A/D Result=40 13:46:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:00 Get A/D filter: -9.255963e+061 result=40 13:46:00 Get A/D value=-858993460 result=40 13:46:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:46:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:46:00 Aux= 13:46:00 Message to Camera, serial 107844 queued 13:46:37 Received message from Master: op=PointingHead serial=107857 13:46:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:46:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:46:37 Point started: ret=0 13:46:37 point_skyscan result=0 13:46:38 Check angles 13:46:38 SkyScan query 13:46:38 SkyScan query done: ret=0 az=113.01<-7534 ze=-23.04<-13536 Statuses=0008 0009 13:46:38 Msec=0 True Az=113.01 Ze=-23.04 Az status=0008 Ze status=0009 13:46:39 Check angles 13:46:39 SkyScan query 13:46:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.01<-14934 Statuses=0008 0009 13:46:39 Msec=750 True Az=112.995 Ze=-44.01 Az status=0008 Ze status=0009 13:46:39 Check angles 13:46:39 SkyScan query 13:46:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.935<-16329 Statuses=0008 0009 13:46:40 Msec=1500 True Az=112.995 Ze=-64.935 Az status=0008 Ze status=0009 13:46:40 Check angles 13:46:40 SkyScan query 13:46:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.89<-17726 Statuses=0008 0009 13:46:41 Msec=2250 True Az=112.995 Ze=-85.89 Az status=0008 Ze status=0009 13:46:41 Check angles 13:46:41 SkyScan query 13:46:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.8<-19120 Statuses=0008 0009 13:46:41 Msec=3000 True Az=112.995 Ze=-106.8 Az status=0008 Ze status=0009 13:46:42 Check angles 13:46:42 SkyScan query 13:46:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.77<-20518 Statuses=0008 0009 13:46:42 Msec=3750 True Az=112.995 Ze=-127.77 Az status=0008 Ze status=0009 13:46:42 Check angles 13:46:42 SkyScan query 13:46:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.695<-21913 Statuses=0008 0009 13:46:43 Msec=4500 True Az=112.995 Ze=-148.695 Az status=0008 Ze status=0009 13:46:43 Check angles 13:46:43 SkyScan query 13:46:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.115<-23341 Statuses=0008 0009 13:46:44 Msec=5250 True Az=112.995 Ze=-170.115 Az status=0008 Ze status=0009 13:46:44 Check angles 13:46:44 SkyScan query 13:46:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:46:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:46:44 Message to Master queued w/err=0: serial=107857 error=0 13:46:49 Received message from Master: op=Filter serial=107858 13:46:49 Color wheel filter change from 0 to 0 13:46:49 FLIGetFilterPos err=0 currentPosition=0 13:46:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:46:49 Filter is already there-color wheel unchanged 13:46:50 Received message from Master: op=Shutter serial=107859 13:46:50 Shutter LASER open 13:46:50 Received message from Camera: op=State serial=107861 13:46:50 GetSingleValue result=40 Value=cccccccc 13:46:50 SkyScan query 13:46:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:46:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:50 Parameters OK 13:46:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:50 Set A/D data flow result=40 13:46:50 Set A/D channel type result=40 13:46:50 Set A/D encoding result=40 13:46:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:50 Set channel filter=0.000000e+000 result=40 13:46:50 Config A/D Result=40 13:46:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:50 Get A/D filter: -9.255963e+061 result=40 13:46:50 Get A/D value=-858993460 result=40 13:46:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:50 Parameters OK 13:46:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:50 Set A/D data flow result=40 13:46:50 Set A/D channel type result=40 13:46:50 Set A/D encoding result=40 13:46:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:50 Set channel filter=0.000000e+000 result=40 13:46:50 Config A/D Result=40 13:46:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:50 Get A/D filter: -9.255963e+061 result=40 13:46:50 Get A/D value=-858993460 result=40 13:46:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:46:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:46:50 Aux= 13:46:50 Message to Camera, serial 107861 queued 13:46:59 Received message from Master: op=Shutter serial=107871 13:46:59 Shutter LASER close 13:46:59 Received message from Master: op=PointingHead serial=107875 13:46:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:46:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:47:00 Point started: ret=0 13:47:00 point_skyscan result=0 13:47:00 Check angles 13:47:00 SkyScan query 13:47:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 13:47:01 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 13:47:01 Check angles 13:47:01 SkyScan query 13:47:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.98<-20132 Statuses=0008 0009 13:47:02 Msec=750 True Az=112.995 Ze=-121.98 Az status=0008 Ze status=0009 13:47:02 Check angles 13:47:02 SkyScan query 13:47:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.085<-18739 Statuses=0008 0009 13:47:03 Msec=1500 True Az=112.995 Ze=-101.085 Az status=0008 Ze status=0009 13:47:03 Check angles 13:47:03 SkyScan query 13:47:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.1<-17340 Statuses=0008 0009 13:47:03 Msec=2250 True Az=112.995 Ze=-80.1 Az status=0008 Ze status=0009 13:47:03 Check angles 13:47:03 SkyScan query 13:47:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.16<-15944 Statuses=0008 0009 13:47:04 Msec=3000 True Az=112.995 Ze=-59.16 Az status=0008 Ze status=0009 13:47:04 Check angles 13:47:04 SkyScan query 13:47:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.145<-14543 Statuses=0008 0009 13:47:05 Msec=3750 True Az=112.995 Ze=-38.145 Az status=0008 Ze status=0009 13:47:05 Check angles 13:47:05 SkyScan query 13:47:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.19<-13146 Statuses=0008 0009 13:47:06 Msec=4500 True Az=112.995 Ze=-17.19 Az status=0008 Ze status=0009 13:47:06 Check angles 13:47:06 SkyScan query 13:47:06 SkyScan query done: ret=0 az=112.995<-7533 ze=3.78<-11748 Statuses=0008 0009 13:47:06 Msec=5250 True Az=112.995 Ze=3.78 Az status=0008 Ze status=0009 13:47:06 Check angles 13:47:06 SkyScan query 13:47:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:47:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:47:07 Message to Master queued w/err=0: serial=107875 error=0 13:47:12 Received message from Master: op=Filter serial=107876 13:47:12 Color wheel filter change from 0 to 0 13:47:12 FLIGetFilterPos err=0 currentPosition=0 13:47:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:47:12 Filter is already there-color wheel unchanged 13:47:12 Received message from Master: op=Shutter serial=107877 13:47:12 Shutter LASER close 13:47:12 Received message from Camera: op=State serial=107879 13:47:12 GetSingleValue result=40 Value=cccccccc 13:47:12 SkyScan query 13:47:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:47:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:13 Parameters OK 13:47:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:13 Set A/D data flow result=40 13:47:13 Set A/D channel type result=40 13:47:13 Set A/D encoding result=40 13:47:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:13 Set channel filter=0.000000e+000 result=40 13:47:13 Config A/D Result=40 13:47:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:13 Get A/D filter: -9.255963e+061 result=40 13:47:13 Get A/D value=-858993460 result=40 13:47:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:13 Parameters OK 13:47:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:13 Set A/D data flow result=40 13:47:13 Set A/D channel type result=40 13:47:13 Set A/D encoding result=40 13:47:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:13 Set channel filter=0.000000e+000 result=40 13:47:13 Config A/D Result=40 13:47:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:13 Get A/D filter: -9.255963e+061 result=40 13:47:13 Get A/D value=-858993460 result=40 13:47:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:47:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:47:13 Aux= 13:47:13 Message to Camera, serial 107879 queued 13:47:50 Received message from Master: op=PointingHead serial=107892 13:47:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:47:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:47:50 Point started: ret=0 13:47:50 point_skyscan result=0 13:47:51 Check angles 13:47:51 SkyScan query 13:47:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:47:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:47:51 Message to Master queued w/err=0: serial=107892 error=0 13:47:56 Received message from Master: op=Filter serial=107893 13:47:56 Color wheel filter change from 0 to 0 13:47:56 FLIGetFilterPos err=0 currentPosition=0 13:47:56 FLIGetStepsRemaining err=0 RemainingSteps=0 13:47:56 Filter is already there-color wheel unchanged 13:47:57 Received message from Master: op=Shutter serial=107894 13:47:57 Shutter LASER close 13:47:57 Received message from Camera: op=State serial=107896 13:47:57 GetSingleValue result=40 Value=cccccccc 13:47:57 SkyScan query 13:47:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:47:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:57 Parameters OK 13:47:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:57 Set A/D data flow result=40 13:47:57 Set A/D channel type result=40 13:47:57 Set A/D encoding result=40 13:47:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:57 Set channel filter=0.000000e+000 result=40 13:47:57 Config A/D Result=40 13:47:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:57 Get A/D filter: -9.255963e+061 result=40 13:47:57 Get A/D value=-858993460 result=40 13:47:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:57 Parameters OK 13:47:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:57 Set A/D data flow result=40 13:47:57 Set A/D channel type result=40 13:47:57 Set A/D encoding result=40 13:47:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:57 Set channel filter=0.000000e+000 result=40 13:47:57 Config A/D Result=40 13:47:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:57 Get A/D filter: -9.255963e+061 result=40 13:47:57 Get A/D value=-858993460 result=40 13:47:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:47:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:47:57 Aux= 13:47:57 Message to Camera, serial 107896 queued 13:48:34 Received message from Master: op=PointingHead serial=107909 13:48:34 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:48:34 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:48:34 Point started: ret=0 13:48:34 point_skyscan result=0 13:48:35 Check angles 13:48:35 SkyScan query 13:48:36 SkyScan query done: ret=0 az=136.17<-9078 ze=-6.51<-12434 Statuses=0009 0008 13:48:36 Msec=0 True Az=136.17 Ze=-6.51 Az status=0009 Ze status=0008 13:48:36 Check angles 13:48:36 SkyScan query 13:48:37 SkyScan query done: ret=0 az=153.72<-10248 ze=-6.495<-12433 Statuses=0009 0008 13:48:37 Msec=750 True Az=153.72 Ze=-6.495 Az status=0009 Ze status=0008 13:48:37 Check angles 13:48:37 SkyScan query 13:48:37 SkyScan query done: ret=0 az=171.135<-11409 ze=-6.495<-12433 Statuses=0009 0008 13:48:37 Msec=1500 True Az=171.135 Ze=-6.495 Az status=0009 Ze status=0008 13:48:37 Check angles 13:48:37 SkyScan query 13:48:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:48:38 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:48:38 Message to Master queued w/err=0: serial=107909 error=0 13:48:43 Received message from Master: op=Filter serial=107910 13:48:43 Color wheel filter change from 0 to 0 13:48:43 FLIGetFilterPos err=0 currentPosition=0 13:48:43 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:43 Filter is already there-color wheel unchanged 13:48:43 Received message from Master: op=Shutter serial=107911 13:48:43 Shutter LASER close 13:48:43 Received message from Camera: op=State serial=107913 13:48:43 GetSingleValue result=40 Value=cccccccc 13:48:43 SkyScan query 13:48:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:48:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:44 Parameters OK 13:48:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:44 Set A/D data flow result=40 13:48:44 Set A/D channel type result=40 13:48:44 Set A/D encoding result=40 13:48:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:44 Set channel filter=0.000000e+000 result=40 13:48:44 Config A/D Result=40 13:48:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:44 Get A/D filter: -9.255963e+061 result=40 13:48:44 Get A/D value=-858993460 result=40 13:48:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:44 Parameters OK 13:48:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:44 Set A/D data flow result=40 13:48:44 Set A/D channel type result=40 13:48:44 Set A/D encoding result=40 13:48:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:44 Set channel filter=0.000000e+000 result=40 13:48:44 Config A/D Result=40 13:48:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:44 Get A/D filter: -9.255963e+061 result=40 13:48:44 Get A/D value=-858993460 result=40 13:48:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:44 Aux= 13:48:44 Message to Camera, serial 107913 queued 13:49:21 Received message from Master: op=PointingHead serial=107926 13:49:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:49:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:49:21 Point started: ret=0 13:49:21 point_skyscan result=0 13:49:22 Check angles 13:49:22 SkyScan query 13:49:22 SkyScan query done: ret=0 az=152.64<-10176 ze=6.51<-11566 Statuses=0009 0008 13:49:22 Msec=0 True Az=152.64 Ze=6.51 Az status=0009 Ze status=0008 13:49:23 Check angles 13:49:23 SkyScan query 13:49:23 SkyScan query done: ret=0 az=134.685<-8979 ze=6.495<-11567 Statuses=0009 0008 13:49:23 Msec=750 True Az=134.685 Ze=6.495 Az status=0009 Ze status=0008 13:49:23 Check angles 13:49:23 SkyScan query 13:49:24 SkyScan query done: ret=0 az=117.27<-7818 ze=6.495<-11567 Statuses=0009 0008 13:49:24 Msec=1500 True Az=117.27 Ze=6.495 Az status=0009 Ze status=0008 13:49:24 Check angles 13:49:24 SkyScan query 13:49:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:49:25 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:49:25 Message to Master queued w/err=0: serial=107926 error=0 13:49:30 Received message from Master: op=Filter serial=107927 13:49:30 Color wheel filter change from 0 to 0 13:49:30 FLIGetFilterPos err=0 currentPosition=0 13:49:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:49:30 Filter is already there-color wheel unchanged 13:49:30 Received message from Master: op=Shutter serial=107928 13:49:30 Shutter LASER close 13:49:30 Received message from Camera: op=State serial=107930 13:49:30 GetSingleValue result=40 Value=cccccccc 13:49:30 SkyScan query 13:49:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:49:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:30 Parameters OK 13:49:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:30 Set A/D data flow result=40 13:49:30 Set A/D channel type result=40 13:49:30 Set A/D encoding result=40 13:49:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:30 Set channel filter=0.000000e+000 result=40 13:49:30 Config A/D Result=40 13:49:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:30 Get A/D filter: -9.255963e+061 result=40 13:49:30 Get A/D value=-858993460 result=40 13:49:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:30 Parameters OK 13:49:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:30 Set A/D data flow result=40 13:49:30 Set A/D channel type result=40 13:49:30 Set A/D encoding result=40 13:49:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:30 Set channel filter=0.000000e+000 result=40 13:49:30 Config A/D Result=40 13:49:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:30 Get A/D filter: -9.255963e+061 result=40 13:49:30 Get A/D value=-858993460 result=40 13:49:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:49:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:49:30 Aux= 13:49:30 Message to Camera, serial 107930 queued 13:50:07 Received message from Master: op=PointingHead serial=107943 13:50:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:50:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:50:08 Point started: ret=0 13:50:08 point_skyscan result=0 13:50:08 Check angles 13:50:08 SkyScan query 13:50:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.13<-13542 Statuses=0008 0009 13:50:09 Msec=0 True Az=112.995 Ze=-23.13 Az status=0008 Ze status=0009 13:50:09 Check angles 13:50:09 SkyScan query 13:50:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 13:50:10 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 13:50:10 Check angles 13:50:10 SkyScan query 13:50:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.415<-16361 Statuses=0008 0009 13:50:10 Msec=1500 True Az=112.995 Ze=-65.415 Az status=0008 Ze status=0009 13:50:11 Check angles 13:50:11 SkyScan query 13:50:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.85<-17790 Statuses=0008 0009 13:50:11 Msec=2250 True Az=112.995 Ze=-86.85 Az status=0008 Ze status=0009 13:50:11 Check angles 13:50:11 SkyScan query 13:50:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.835<-19189 Statuses=0008 0009 13:50:12 Msec=3000 True Az=112.995 Ze=-107.835 Az status=0008 Ze status=0009 13:50:12 Check angles 13:50:12 SkyScan query 13:50:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.76<-20584 Statuses=0008 0009 13:50:13 Msec=3750 True Az=112.995 Ze=-128.76 Az status=0008 Ze status=0009 13:50:13 Check angles 13:50:13 SkyScan query 13:50:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.135<-22009 Statuses=0008 0009 13:50:13 Msec=4500 True Az=112.995 Ze=-150.135 Az status=0008 Ze status=0009 13:50:14 Check angles 13:50:14 SkyScan query 13:50:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.97<-23398 Statuses=0008 0009 13:50:14 Msec=5250 True Az=112.995 Ze=-170.97 Az status=0008 Ze status=0009 13:50:14 Check angles 13:50:14 SkyScan query 13:50:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:50:15 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:50:15 Message to Master queued w/err=0: serial=107943 error=0 13:50:20 Received message from Master: op=Filter serial=107944 13:50:20 Color wheel filter change from 0 to 0 13:50:20 FLIGetFilterPos err=0 currentPosition=0 13:50:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:20 Filter is already there-color wheel unchanged 13:50:20 Received message from Master: op=Shutter serial=107945 13:50:20 Shutter LASER open 13:50:20 Received message from Camera: op=State serial=107947 13:50:20 GetSingleValue result=40 Value=cccccccc 13:50:20 SkyScan query 13:50:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:50:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:21 Parameters OK 13:50:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:21 Set A/D data flow result=40 13:50:21 Set A/D channel type result=40 13:50:21 Set A/D encoding result=40 13:50:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:21 Set channel filter=0.000000e+000 result=40 13:50:21 Config A/D Result=40 13:50:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:21 Get A/D filter: -9.255963e+061 result=40 13:50:21 Get A/D value=-858993460 result=40 13:50:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:21 Parameters OK 13:50:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:21 Set A/D data flow result=40 13:50:21 Set A/D channel type result=40 13:50:21 Set A/D encoding result=40 13:50:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:21 Set channel filter=0.000000e+000 result=40 13:50:21 Config A/D Result=40 13:50:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:21 Get A/D filter: -9.255963e+061 result=40 13:50:21 Get A/D value=-858993460 result=40 13:50:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:21 Aux= 13:50:21 Message to Camera, serial 107947 queued 13:50:29 Received message from Master: op=Shutter serial=107957 13:50:29 Shutter LASER close 13:50:30 Received message from Master: op=PointingHead serial=107961 13:50:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:50:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:50:30 Point started: ret=0 13:50:30 point_skyscan result=0 13:50:31 Check angles 13:50:31 SkyScan query 13:50:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 13:50:31 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 13:50:32 Check angles 13:50:32 SkyScan query 13:50:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 13:50:32 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 13:50:32 Check angles 13:50:32 SkyScan query 13:50:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.935<-18729 Statuses=0008 0009 13:50:33 Msec=1500 True Az=112.995 Ze=-100.935 Az status=0008 Ze status=0009 13:50:33 Check angles 13:50:33 SkyScan query 13:50:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.965<-17331 Statuses=0008 0009 13:50:34 Msec=2250 True Az=112.995 Ze=-79.965 Az status=0008 Ze status=0009 13:50:34 Check angles 13:50:34 SkyScan query 13:50:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.01<-15934 Statuses=0008 0009 13:50:34 Msec=3000 True Az=112.995 Ze=-59.01 Az status=0008 Ze status=0009 13:50:35 Check angles 13:50:35 SkyScan query 13:50:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.98<-14532 Statuses=0008 0009 13:50:35 Msec=3750 True Az=112.995 Ze=-37.98 Az status=0008 Ze status=0009 13:50:35 Check angles 13:50:35 SkyScan query 13:50:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.055<-13137 Statuses=0008 0009 13:50:36 Msec=4500 True Az=112.995 Ze=-17.055 Az status=0008 Ze status=0009 13:50:36 Check angles 13:50:36 SkyScan query 13:50:37 SkyScan query done: ret=0 az=112.995<-7533 ze=3.9<-11740 Statuses=0008 0009 13:50:37 Msec=5250 True Az=112.995 Ze=3.9 Az status=0008 Ze status=0009 13:50:37 Check angles 13:50:37 SkyScan query 13:50:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:50:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:50:37 Message to Master queued w/err=0: serial=107961 error=0 13:50:42 Received message from Master: op=Filter serial=107962 13:50:42 Color wheel filter change from 0 to 0 13:50:42 FLIGetFilterPos err=0 currentPosition=0 13:50:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:42 Filter is already there-color wheel unchanged 13:50:43 Received message from Master: op=Shutter serial=107963 13:50:43 Shutter LASER close 13:50:43 Received message from Camera: op=State serial=107965 13:50:43 GetSingleValue result=40 Value=cccccccc 13:50:43 SkyScan query 13:50:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:50:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:43 Parameters OK 13:50:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:43 Set A/D data flow result=40 13:50:43 Set A/D channel type result=40 13:50:43 Set A/D encoding result=40 13:50:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:43 Set channel filter=0.000000e+000 result=40 13:50:43 Config A/D Result=40 13:50:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:43 Get A/D filter: -9.255963e+061 result=40 13:50:43 Get A/D value=-858993460 result=40 13:50:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:43 Parameters OK 13:50:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:43 Set A/D data flow result=40 13:50:43 Set A/D channel type result=40 13:50:43 Set A/D encoding result=40 13:50:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:43 Set channel filter=0.000000e+000 result=40 13:50:43 Config A/D Result=40 13:50:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:43 Get A/D filter: -9.255963e+061 result=40 13:50:43 Get A/D value=-858993460 result=40 13:50:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:43 Aux= 13:50:43 Message to Camera, serial 107965 queued 13:51:20 Received message from Master: op=PointingHead serial=107978 13:51:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:51:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:51:21 Point started: ret=0 13:51:21 point_skyscan result=0 13:51:21 Check angles 13:51:21 SkyScan query 13:51:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:51:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:51:22 Message to Master queued w/err=0: serial=107978 error=0 13:51:27 Received message from Master: op=Filter serial=107979 13:51:27 Color wheel filter change from 0 to 0 13:51:27 FLIGetFilterPos err=0 currentPosition=0 13:51:27 FLIGetStepsRemaining err=0 RemainingSteps=0 13:51:27 Filter is already there-color wheel unchanged 13:51:27 Received message from Master: op=Shutter serial=107980 13:51:27 Shutter LASER close 13:51:27 Received message from Camera: op=State serial=107982 13:51:27 GetSingleValue result=40 Value=cccccccc 13:51:27 SkyScan query 13:51:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:51:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:28 Parameters OK 13:51:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:28 Set A/D data flow result=40 13:51:28 Set A/D channel type result=40 13:51:28 Set A/D encoding result=40 13:51:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:28 Set channel filter=0.000000e+000 result=40 13:51:28 Config A/D Result=40 13:51:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:28 Get A/D filter: -9.255963e+061 result=40 13:51:28 Get A/D value=-858993460 result=40 13:51:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:28 Parameters OK 13:51:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:28 Set A/D data flow result=40 13:51:28 Set A/D channel type result=40 13:51:28 Set A/D encoding result=40 13:51:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:28 Set channel filter=0.000000e+000 result=40 13:51:28 Config A/D Result=40 13:51:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:28 Get A/D filter: -9.255963e+061 result=40 13:51:28 Get A/D value=-858993460 result=40 13:51:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:51:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:51:28 Aux= 13:51:28 Message to Camera, serial 107982 queued 13:52:05 Received message from Master: op=PointingHead serial=107995 13:52:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:52:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:52:05 Point started: ret=0 13:52:05 point_skyscan result=0 13:52:06 Check angles 13:52:06 SkyScan query 13:52:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:52:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:52:06 Message to Master queued w/err=0: serial=107995 error=0 13:52:11 Received message from Master: op=Filter serial=107996 13:52:11 Color wheel filter change from 0 to 0 13:52:11 FLIGetFilterPos err=0 currentPosition=0 13:52:11 FLIGetStepsRemaining err=0 RemainingSteps=0 13:52:11 Filter is already there-color wheel unchanged 13:52:11 Received message from Master: op=Shutter serial=107997 13:52:11 Shutter LASER close 13:52:11 Received message from Camera: op=State serial=107999 13:52:11 GetSingleValue result=40 Value=cccccccc 13:52:11 SkyScan query 13:52:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:52:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:12 Parameters OK 13:52:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:12 Set A/D data flow result=40 13:52:12 Set A/D channel type result=40 13:52:12 Set A/D encoding result=40 13:52:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:12 Set channel filter=0.000000e+000 result=40 13:52:12 Config A/D Result=40 13:52:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:12 Get A/D filter: -9.255963e+061 result=40 13:52:12 Get A/D value=-858993460 result=40 13:52:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:12 Parameters OK 13:52:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:12 Set A/D data flow result=40 13:52:12 Set A/D channel type result=40 13:52:12 Set A/D encoding result=40 13:52:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:12 Set channel filter=0.000000e+000 result=40 13:52:12 Config A/D Result=40 13:52:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:12 Get A/D filter: -9.255963e+061 result=40 13:52:12 Get A/D value=-858993460 result=40 13:52:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:52:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:52:12 Aux= 13:52:12 Message to Camera, serial 107999 queued 13:52:48 Received message from Master: op=PointingHead serial=108011 13:52:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:52:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:52:48 Point started: ret=0 13:52:48 point_skyscan result=0 13:52:49 Check angles 13:52:49 SkyScan query 13:52:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:52:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:52:50 Message to Master queued w/err=0: serial=108011 error=0 13:52:55 Received message from Master: op=Filter serial=108012 13:52:55 Color wheel filter change from 0 to 0 13:52:55 FLIGetFilterPos err=0 currentPosition=0 13:52:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:52:55 Filter is already there-color wheel unchanged 13:52:55 Received message from Master: op=Shutter serial=108013 13:52:55 Shutter LASER close 13:52:55 Received message from Camera: op=State serial=108015 13:52:55 GetSingleValue result=40 Value=cccccccc 13:52:55 SkyScan query 13:52:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:52:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:55 Parameters OK 13:52:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:55 Set A/D data flow result=40 13:52:55 Set A/D channel type result=40 13:52:55 Set A/D encoding result=40 13:52:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:55 Set channel filter=0.000000e+000 result=40 13:52:55 Config A/D Result=40 13:52:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:55 Get A/D filter: -9.255963e+061 result=40 13:52:55 Get A/D value=-858993460 result=40 13:52:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:55 Parameters OK 13:52:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:55 Set A/D data flow result=40 13:52:55 Set A/D channel type result=40 13:52:55 Set A/D encoding result=40 13:52:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:55 Set channel filter=0.000000e+000 result=40 13:52:55 Config A/D Result=40 13:52:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:55 Get A/D filter: -9.255963e+061 result=40 13:52:55 Get A/D value=-858993460 result=40 13:52:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:52:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:52:55 Aux= 13:52:55 Message to Camera, serial 108015 queued 13:53:32 Received message from Master: op=PointingHead serial=108028 13:53:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:53:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:53:33 Point started: ret=0 13:53:33 point_skyscan result=0 13:53:33 Check angles 13:53:33 SkyScan query 13:53:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.79<-13586 Statuses=0008 0009 13:53:34 Msec=0 True Az=112.995 Ze=-23.79 Az status=0008 Ze status=0009 13:53:34 Check angles 13:53:34 SkyScan query 13:53:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.73<-14982 Statuses=0008 0009 13:53:35 Msec=750 True Az=112.995 Ze=-44.73 Az status=0008 Ze status=0009 13:53:35 Check angles 13:53:35 SkyScan query 13:53:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.67<-16378 Statuses=0008 0009 13:53:35 Msec=1500 True Az=112.995 Ze=-65.67 Az status=0008 Ze status=0009 13:53:36 Check angles 13:53:36 SkyScan query 13:53:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.655<-17777 Statuses=0008 0009 13:53:36 Msec=2250 True Az=112.995 Ze=-86.655 Az status=0008 Ze status=0009 13:53:36 Check angles 13:53:36 SkyScan query 13:53:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.61<-19174 Statuses=0008 0009 13:53:37 Msec=3000 True Az=112.995 Ze=-107.61 Az status=0008 Ze status=0009 13:53:37 Check angles 13:53:37 SkyScan query 13:53:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.565<-20571 Statuses=0008 0009 13:53:38 Msec=3750 True Az=112.995 Ze=-128.565 Az status=0008 Ze status=0009 13:53:38 Check angles 13:53:38 SkyScan query 13:53:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.565<-21971 Statuses=0008 0009 13:53:38 Msec=4500 True Az=112.995 Ze=-149.565 Az status=0008 Ze status=0009 13:53:39 Check angles 13:53:39 SkyScan query 13:53:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.49<-23366 Statuses=0008 0009 13:53:39 Msec=5250 True Az=112.995 Ze=-170.49 Az status=0008 Ze status=0009 13:53:39 Check angles 13:53:39 SkyScan query 13:53:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:53:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:53:40 Message to Master queued w/err=0: serial=108028 error=0 13:53:45 Received message from Master: op=Filter serial=108029 13:53:45 Color wheel filter change from 0 to 0 13:53:45 FLIGetFilterPos err=0 currentPosition=0 13:53:45 FLIGetStepsRemaining err=0 RemainingSteps=0 13:53:45 Filter is already there-color wheel unchanged 13:53:45 Received message from Master: op=Shutter serial=108030 13:53:45 Shutter LASER open 13:53:45 Received message from Camera: op=State serial=108032 13:53:45 GetSingleValue result=40 Value=cccccccc 13:53:45 SkyScan query 13:53:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:53:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:46 Parameters OK 13:53:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:46 Set A/D data flow result=40 13:53:46 Set A/D channel type result=40 13:53:46 Set A/D encoding result=40 13:53:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:46 Set channel filter=0.000000e+000 result=40 13:53:46 Config A/D Result=40 13:53:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:46 Get A/D filter: -9.255963e+061 result=40 13:53:46 Get A/D value=-858993460 result=40 13:53:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:46 Parameters OK 13:53:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:46 Set A/D data flow result=40 13:53:46 Set A/D channel type result=40 13:53:46 Set A/D encoding result=40 13:53:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:46 Set channel filter=0.000000e+000 result=40 13:53:46 Config A/D Result=40 13:53:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:46 Get A/D filter: -9.255963e+061 result=40 13:53:46 Get A/D value=-858993460 result=40 13:53:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:53:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:53:46 Aux= 13:53:46 Message to Camera, serial 108032 queued 13:53:54 Received message from Master: op=Shutter serial=108042 13:53:54 Shutter LASER close 13:53:55 Received message from Master: op=PointingHead serial=108046 13:53:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:53:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:53:55 Point started: ret=0 13:53:55 point_skyscan result=0 13:53:56 Check angles 13:53:56 SkyScan query 13:53:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.475<-21565 Statuses=0008 0009 13:53:56 Msec=0 True Az=112.995 Ze=-143.475 Az status=0008 Ze status=0009 13:53:57 Check angles 13:53:57 SkyScan query 13:53:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 13:53:57 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 13:53:57 Check angles 13:53:57 SkyScan query 13:53:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.695<-18713 Statuses=0008 0009 13:53:58 Msec=1500 True Az=112.995 Ze=-100.695 Az status=0008 Ze status=0009 13:53:58 Check angles 13:53:58 SkyScan query 13:53:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.725<-17315 Statuses=0008 0009 13:53:59 Msec=2250 True Az=112.995 Ze=-79.725 Az status=0008 Ze status=0009 13:53:59 Check angles 13:53:59 SkyScan query 13:54:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.785<-15919 Statuses=0008 0009 13:54:00 Msec=3000 True Az=112.995 Ze=-58.785 Az status=0008 Ze status=0009 13:54:00 Check angles 13:54:00 SkyScan query 13:54:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.8<-14520 Statuses=0008 0009 13:54:00 Msec=3750 True Az=112.995 Ze=-37.8 Az status=0008 Ze status=0009 13:54:00 Check angles 13:54:00 SkyScan query 13:54:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.86<-13124 Statuses=0008 0009 13:54:01 Msec=4500 True Az=112.995 Ze=-16.86 Az status=0008 Ze status=0009 13:54:01 Check angles 13:54:01 SkyScan query 13:54:02 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 13:54:02 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 13:54:02 Check angles 13:54:02 SkyScan query 13:54:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:54:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:54:03 Message to Master queued w/err=0: serial=108046 error=0 13:54:08 Received message from Master: op=Filter serial=108047 13:54:08 Color wheel filter change from 0 to 0 13:54:08 FLIGetFilterPos err=0 currentPosition=0 13:54:08 FLIGetStepsRemaining err=0 RemainingSteps=0 13:54:08 Filter is already there-color wheel unchanged 13:54:08 Received message from Master: op=Shutter serial=108048 13:54:08 Shutter LASER close 13:54:08 Received message from Camera: op=State serial=108050 13:54:08 GetSingleValue result=40 Value=cccccccc 13:54:08 SkyScan query 13:54:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:54:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:08 Parameters OK 13:54:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:08 Set A/D data flow result=40 13:54:08 Set A/D channel type result=40 13:54:08 Set A/D encoding result=40 13:54:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:08 Set channel filter=0.000000e+000 result=40 13:54:08 Config A/D Result=40 13:54:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:08 Get A/D filter: -9.255963e+061 result=40 13:54:08 Get A/D value=-858993460 result=40 13:54:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:08 Parameters OK 13:54:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:08 Set A/D data flow result=40 13:54:08 Set A/D channel type result=40 13:54:08 Set A/D encoding result=40 13:54:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:08 Set channel filter=0.000000e+000 result=40 13:54:08 Config A/D Result=40 13:54:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:08 Get A/D filter: -9.255963e+061 result=40 13:54:08 Get A/D value=-858993460 result=40 13:54:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:54:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:54:08 Aux= 13:54:08 Message to Camera, serial 108050 queued 13:54:45 Received message from Master: op=PointingHead serial=108063 13:54:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:54:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:54:46 Point started: ret=0 13:54:46 point_skyscan result=0 13:54:46 Check angles 13:54:46 SkyScan query 13:54:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:54:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:54:47 Message to Master queued w/err=0: serial=108063 error=0 13:54:52 Received message from Master: op=Filter serial=108064 13:54:52 Color wheel filter change from 0 to 0 [UTC 2019-3-4 13:54:52] 13:54:52 FLIGetFilterPos err=0 currentPosition=0 13:54:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:54:52 Filter is already there-color wheel unchanged 13:54:52 Received message from Master: op=Shutter serial=108065 13:54:52 Shutter LASER close 13:54:52 Received message from Camera: op=State serial=108067 13:54:52 GetSingleValue result=40 Value=cccccccc 13:54:52 SkyScan query 13:54:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:54:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:53 Parameters OK 13:54:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:53 Set A/D data flow result=40 13:54:53 Set A/D channel type result=40 13:54:53 Set A/D encoding result=40 13:54:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:53 Set channel filter=0.000000e+000 result=40 13:54:53 Config A/D Result=40 13:54:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:53 Get A/D filter: -9.255963e+061 result=40 13:54:53 Get A/D value=-858993460 result=40 13:54:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:53 Parameters OK 13:54:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:53 Set A/D data flow result=40 13:54:53 Set A/D channel type result=40 13:54:53 Set A/D encoding result=40 13:54:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:53 Set channel filter=0.000000e+000 result=40 13:54:53 Config A/D Result=40 13:54:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:53 Get A/D filter: -9.255963e+061 result=40 13:54:53 Get A/D value=-858993460 result=40 13:54:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:54:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:54:53 Aux= 13:54:53 Message to Camera, serial 108067 queued 13:55:30 Received message from Master: op=PointingHead serial=108080 13:55:30 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:55:30 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:55:30 Point started: ret=0 13:55:30 point_skyscan result=0 13:55:31 Check angles 13:55:31 SkyScan query 13:55:31 SkyScan query done: ret=0 az=135.765<-9051 ze=-6.51<-12434 Statuses=0009 0008 13:55:31 Msec=0 True Az=135.765 Ze=-6.51 Az status=0009 Ze status=0008 13:55:32 Check angles 13:55:32 SkyScan query 13:55:32 SkyScan query done: ret=0 az=153.285<-10219 ze=-6.51<-12434 Statuses=0009 0008 13:55:32 Msec=750 True Az=153.285 Ze=-6.51 Az status=0009 Ze status=0008 13:55:32 Check angles 13:55:32 SkyScan query 13:55:33 SkyScan query done: ret=0 az=170.715<-11381 ze=-6.495<-12433 Statuses=0009 0008 13:55:33 Msec=1500 True Az=170.715 Ze=-6.495 Az status=0009 Ze status=0008 13:55:33 Check angles 13:55:33 SkyScan query 13:55:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:55:34 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 13:55:34 Message to Master queued w/err=0: serial=108080 error=0 13:55:39 Received message from Master: op=Filter serial=108081 13:55:39 Color wheel filter change from 0 to 0 13:55:39 FLIGetFilterPos err=0 currentPosition=0 13:55:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:55:39 Filter is already there-color wheel unchanged 13:55:39 Received message from Master: op=Shutter serial=108082 13:55:39 Shutter LASER close 13:55:39 Received message from Camera: op=State serial=108084 13:55:39 GetSingleValue result=40 Value=cccccccc 13:55:39 SkyScan query 13:55:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:55:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:39 Parameters OK 13:55:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:39 Set A/D data flow result=40 13:55:39 Set A/D channel type result=40 13:55:39 Set A/D encoding result=40 13:55:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:39 Set channel filter=0.000000e+000 result=40 13:55:39 Config A/D Result=40 13:55:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:39 Get A/D filter: -9.255963e+061 result=40 13:55:39 Get A/D value=-858993460 result=40 13:55:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:39 Parameters OK 13:55:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:39 Set A/D data flow result=40 13:55:39 Set A/D channel type result=40 13:55:39 Set A/D encoding result=40 13:55:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:39 Set channel filter=0.000000e+000 result=40 13:55:39 Config A/D Result=40 13:55:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:39 Get A/D filter: -9.255963e+061 result=40 13:55:39 Get A/D value=-858993460 result=40 13:55:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:55:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:55:39 Aux= 13:55:39 Message to Camera, serial 108084 queued 13:56:15 Received message from Master: op=PointingHead serial=108096 13:56:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:56:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:56:16 Point started: ret=0 13:56:16 point_skyscan result=0 13:56:16 Check angles 13:56:16 SkyScan query 13:56:17 SkyScan query done: ret=0 az=153.075<-10205 ze=6.51<-11566 Statuses=0009 0008 13:56:17 Msec=0 True Az=153.075 Ze=6.51 Az status=0009 Ze status=0008 13:56:17 Check angles 13:56:17 SkyScan query 13:56:18 SkyScan query done: ret=0 az=135.675<-9045 ze=6.495<-11567 Statuses=0009 0008 13:56:18 Msec=750 True Az=135.675 Ze=6.495 Az status=0009 Ze status=0008 13:56:18 Check angles 13:56:18 SkyScan query 13:56:18 SkyScan query done: ret=0 az=118.185<-7879 ze=6.495<-11567 Statuses=0009 0008 13:56:18 Msec=1500 True Az=118.185 Ze=6.495 Az status=0009 Ze status=0008 13:56:19 Check angles 13:56:19 SkyScan query 13:56:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:56:19 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:56:19 Message to Master queued w/err=0: serial=108096 error=0 13:56:24 Received message from Master: op=Filter serial=108097 13:56:24 Color wheel filter change from 0 to 0 13:56:24 FLIGetFilterPos err=0 currentPosition=0 13:56:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:56:24 Filter is already there-color wheel unchanged 13:56:24 Received message from Master: op=Shutter serial=108098 13:56:24 Shutter LASER close 13:56:24 Received message from Camera: op=State serial=108100 13:56:24 GetSingleValue result=40 Value=cccccccc 13:56:24 SkyScan query 13:56:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:56:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:25 Parameters OK 13:56:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:25 Set A/D data flow result=40 13:56:25 Set A/D channel type result=40 13:56:25 Set A/D encoding result=40 13:56:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:25 Set channel filter=0.000000e+000 result=40 13:56:25 Config A/D Result=40 13:56:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:25 Get A/D filter: -9.255963e+061 result=40 13:56:25 Get A/D value=-858993460 result=40 13:56:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:25 Parameters OK 13:56:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:25 Set A/D data flow result=40 13:56:25 Set A/D channel type result=40 13:56:25 Set A/D encoding result=40 13:56:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:25 Set channel filter=0.000000e+000 result=40 13:56:25 Config A/D Result=40 13:56:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:25 Get A/D filter: -9.255963e+061 result=40 13:56:25 Get A/D value=-858993460 result=40 13:56:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:56:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:56:25 Aux= 13:56:25 Message to Camera, serial 108100 queued 13:57:02 Received message from Master: op=PointingHead serial=108113 13:57:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:57:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:57:02 Point started: ret=0 13:57:02 point_skyscan result=0 13:57:03 Check angles 13:57:03 SkyScan query 13:57:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.04<-13536 Statuses=0008 0009 13:57:04 Msec=0 True Az=112.995 Ze=-23.04 Az status=0008 Ze status=0009 13:57:04 Check angles 13:57:04 SkyScan query 13:57:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 13:57:04 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 13:57:04 Check angles 13:57:04 SkyScan query 13:57:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.95<-16330 Statuses=0008 0009 13:57:05 Msec=1500 True Az=112.995 Ze=-64.95 Az status=0008 Ze status=0009 13:57:05 Check angles 13:57:05 SkyScan query 13:57:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.89<-17726 Statuses=0008 0009 13:57:06 Msec=2250 True Az=112.995 Ze=-85.89 Az status=0008 Ze status=0009 13:57:06 Check angles 13:57:06 SkyScan query 13:57:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.8<-19120 Statuses=0008 0009 13:57:07 Msec=3000 True Az=112.995 Ze=-106.8 Az status=0008 Ze status=0009 13:57:07 Check angles 13:57:07 SkyScan query 13:57:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.785<-20519 Statuses=0008 0009 13:57:07 Msec=3750 True Az=112.995 Ze=-127.785 Az status=0008 Ze status=0009 13:57:07 Check angles 13:57:07 SkyScan query 13:57:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.71<-21914 Statuses=0008 0009 13:57:08 Msec=4500 True Az=112.995 Ze=-148.71 Az status=0008 Ze status=0009 13:57:08 Check angles 13:57:08 SkyScan query 13:57:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.665<-23311 Statuses=0008 0009 13:57:09 Msec=5250 True Az=112.995 Ze=-169.665 Az status=0008 Ze status=0009 13:57:09 Check angles 13:57:09 SkyScan query 13:57:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:57:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:57:10 Message to Master queued w/err=0: serial=108113 error=0 13:57:15 Received message from Master: op=Filter serial=108114 13:57:15 Color wheel filter change from 0 to 0 13:57:15 FLIGetFilterPos err=0 currentPosition=0 13:57:15 FLIGetStepsRemaining err=0 RemainingSteps=0 13:57:15 Filter is already there-color wheel unchanged 13:57:15 Received message from Master: op=Shutter serial=108115 13:57:15 Shutter LASER open 13:57:15 Received message from Camera: op=State serial=108117 13:57:15 GetSingleValue result=40 Value=cccccccc 13:57:15 SkyScan query 13:57:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:57:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:15 Parameters OK 13:57:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:15 Set A/D data flow result=40 13:57:15 Set A/D channel type result=40 13:57:15 Set A/D encoding result=40 13:57:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:15 Set channel filter=0.000000e+000 result=40 13:57:15 Config A/D Result=40 13:57:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:15 Get A/D filter: -9.255963e+061 result=40 13:57:15 Get A/D value=-858993460 result=40 13:57:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:15 Parameters OK 13:57:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:15 Set A/D data flow result=40 13:57:15 Set A/D channel type result=40 13:57:15 Set A/D encoding result=40 13:57:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:15 Set channel filter=0.000000e+000 result=40 13:57:15 Config A/D Result=40 13:57:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:15 Get A/D filter: -9.255963e+061 result=40 13:57:15 Get A/D value=-858993460 result=40 13:57:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:57:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:57:15 Aux= 13:57:15 Message to Camera, serial 108117 queued 13:57:24 Received message from Master: op=Shutter serial=108127 13:57:24 Shutter LASER close 13:57:24 Received message from Master: op=PointingHead serial=108131 13:57:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:57:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:57:25 Point started: ret=0 13:57:25 point_skyscan result=0 13:57:25 Check angles 13:57:25 SkyScan query 13:57:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 13:57:26 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 13:57:26 Check angles 13:57:26 SkyScan query 13:57:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 13:57:27 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 13:57:27 Check angles 13:57:27 SkyScan query 13:57:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.86<-18724 Statuses=0008 0009 13:57:28 Msec=1500 True Az=112.995 Ze=-100.86 Az status=0008 Ze status=0009 13:57:28 Check angles 13:57:28 SkyScan query 13:57:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.875<-17325 Statuses=0008 0009 13:57:28 Msec=2250 True Az=112.995 Ze=-79.875 Az status=0008 Ze status=0009 13:57:28 Check angles 13:57:28 SkyScan query 13:57:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.935<-15929 Statuses=0008 0009 13:57:29 Msec=3000 True Az=112.995 Ze=-58.935 Az status=0008 Ze status=0009 13:57:29 Check angles 13:57:29 SkyScan query 13:57:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.515<-14501 Statuses=0008 0009 13:57:30 Msec=3750 True Az=112.995 Ze=-37.515 Az status=0008 Ze status=0009 13:57:30 Check angles 13:57:30 SkyScan query 13:57:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.56<-13104 Statuses=0008 0009 13:57:31 Msec=4500 True Az=112.995 Ze=-16.56 Az status=0008 Ze status=0009 13:57:31 Check angles 13:57:31 SkyScan query 13:57:31 SkyScan query done: ret=0 az=113.01<-7534 ze=4.305<-11713 Statuses=0008 0009 13:57:31 Msec=5250 True Az=113.01 Ze=4.305 Az status=0008 Ze status=0009 13:57:31 Check angles 13:57:31 SkyScan query 13:57:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:57:32 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:57:32 Message to Master queued w/err=0: serial=108131 error=0 13:57:37 Received message from Master: op=Filter serial=108132 13:57:37 Color wheel filter change from 0 to 0 13:57:37 FLIGetFilterPos err=0 currentPosition=0 13:57:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:57:37 Filter is already there-color wheel unchanged 13:57:37 Received message from Master: op=Shutter serial=108133 13:57:37 Shutter LASER close 13:57:37 Received message from Camera: op=State serial=108135 13:57:37 GetSingleValue result=40 Value=cccccccc 13:57:37 SkyScan query 13:57:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:57:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:38 Parameters OK 13:57:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:38 Set A/D data flow result=40 13:57:38 Set A/D channel type result=40 13:57:38 Set A/D encoding result=40 13:57:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:38 Set channel filter=0.000000e+000 result=40 13:57:38 Config A/D Result=40 13:57:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:38 Get A/D filter: -9.255963e+061 result=40 13:57:38 Get A/D value=-858993460 result=40 13:57:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:38 Parameters OK 13:57:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:38 Set A/D data flow result=40 13:57:38 Set A/D channel type result=40 13:57:38 Set A/D encoding result=40 13:57:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:38 Set channel filter=0.000000e+000 result=40 13:57:38 Config A/D Result=40 13:57:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:38 Get A/D filter: -9.255963e+061 result=40 13:57:38 Get A/D value=-858993460 result=40 13:57:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:57:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:57:38 Aux= 13:57:38 Message to Camera, serial 108135 queued 13:58:15 Received message from Master: op=PointingHead serial=108148 13:58:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:58:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:58:15 Point started: ret=0 13:58:15 point_skyscan result=0 13:58:16 Check angles 13:58:16 SkyScan query 13:58:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:58:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:58:16 Message to Master queued w/err=0: serial=108148 error=0 13:58:21 Received message from Master: op=Filter serial=108149 13:58:21 Color wheel filter change from 0 to 0 13:58:21 FLIGetFilterPos err=0 currentPosition=0 13:58:21 FLIGetStepsRemaining err=0 RemainingSteps=0 13:58:21 Filter is already there-color wheel unchanged 13:58:22 Received message from Master: op=Shutter serial=108150 13:58:22 Shutter LASER close 13:58:22 Received message from Camera: op=State serial=108152 13:58:22 GetSingleValue result=40 Value=cccccccc 13:58:22 SkyScan query 13:58:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:58:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:22 Parameters OK 13:58:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:22 Set A/D data flow result=40 13:58:22 Set A/D channel type result=40 13:58:22 Set A/D encoding result=40 13:58:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:22 Set channel filter=0.000000e+000 result=40 13:58:22 Config A/D Result=40 13:58:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:22 Get A/D filter: -9.255963e+061 result=40 13:58:22 Get A/D value=-858993460 result=40 13:58:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:22 Parameters OK 13:58:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:22 Set A/D data flow result=40 13:58:22 Set A/D channel type result=40 13:58:22 Set A/D encoding result=40 13:58:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:22 Set channel filter=0.000000e+000 result=40 13:58:22 Config A/D Result=40 13:58:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:22 Get A/D filter: -9.255963e+061 result=40 13:58:22 Get A/D value=-858993460 result=40 13:58:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:58:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:58:22 Aux= 13:58:22 Message to Camera, serial 108152 queued 13:58:59 Received message from Master: op=PointingHead serial=108165 13:58:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:58:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:58:59 Point started: ret=0 13:58:59 point_skyscan result=0 13:59:00 Check angles 13:59:00 SkyScan query 13:59:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:59:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:59:01 Message to Master queued w/err=0: serial=108165 error=0 13:59:06 Received message from Master: op=Filter serial=108166 13:59:06 Color wheel filter change from 0 to 0 13:59:06 FLIGetFilterPos err=0 currentPosition=0 13:59:06 FLIGetStepsRemaining err=0 RemainingSteps=0 13:59:06 Filter is already there-color wheel unchanged 13:59:06 Received message from Master: op=Shutter serial=108167 13:59:06 Shutter LASER close 13:59:06 Received message from Camera: op=State serial=108169 13:59:06 GetSingleValue result=40 Value=cccccccc 13:59:06 SkyScan query 13:59:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:59:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:07 Parameters OK 13:59:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:07 Set A/D data flow result=40 13:59:07 Set A/D channel type result=40 13:59:07 Set A/D encoding result=40 13:59:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:07 Set channel filter=0.000000e+000 result=40 13:59:07 Config A/D Result=40 13:59:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:07 Get A/D filter: -9.255963e+061 result=40 13:59:07 Get A/D value=-858993460 result=40 13:59:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:07 Parameters OK 13:59:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:07 Set A/D data flow result=40 13:59:07 Set A/D channel type result=40 13:59:07 Set A/D encoding result=40 13:59:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:07 Set channel filter=0.000000e+000 result=40 13:59:07 Config A/D Result=40 13:59:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:07 Get A/D filter: -9.255963e+061 result=40 13:59:07 Get A/D value=-858993460 result=40 13:59:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:59:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:59:07 Aux= 13:59:07 Message to Camera, serial 108169 queued 13:59:43 Received message from Master: op=PointingHead serial=108182 13:59:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:59:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:59:44 Point started: ret=0 13:59:44 point_skyscan result=0 13:59:45 Check angles 13:59:45 SkyScan query 13:59:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:59:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:59:45 Message to Master queued w/err=0: serial=108182 error=0 13:59:50 Received message from Master: op=Filter serial=108183 13:59:50 Color wheel filter change from 0 to 0 13:59:50 FLIGetFilterPos err=0 currentPosition=0 13:59:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:59:50 Filter is already there-color wheel unchanged 13:59:50 Received message from Master: op=Shutter serial=108184 13:59:50 Shutter LASER close 13:59:50 Received message from Camera: op=State serial=108186 13:59:50 GetSingleValue result=40 Value=cccccccc 13:59:50 SkyScan query 13:59:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:59:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:51 Parameters OK 13:59:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:51 Set A/D data flow result=40 13:59:51 Set A/D channel type result=40 13:59:51 Set A/D encoding result=40 13:59:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:51 Set channel filter=0.000000e+000 result=40 13:59:51 Config A/D Result=40 13:59:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:51 Get A/D filter: -9.255963e+061 result=40 13:59:51 Get A/D value=-858993460 result=40 13:59:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:51 Parameters OK 13:59:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:51 Set A/D data flow result=40 13:59:51 Set A/D channel type result=40 13:59:51 Set A/D encoding result=40 13:59:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:51 Set channel filter=0.000000e+000 result=40 13:59:51 Config A/D Result=40 13:59:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:51 Get A/D filter: -9.255963e+061 result=40 13:59:51 Get A/D value=-858993460 result=40 13:59:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:59:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:59:51 Aux= 13:59:51 Message to Camera, serial 108186 queued 14:00:28 Received message from Master: op=PointingHead serial=108199 14:00:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:00:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:00:28 Point started: ret=0 14:00:28 point_skyscan result=0 14:00:29 Check angles 14:00:29 SkyScan query 14:00:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 14:00:29 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 14:00:30 Check angles 14:00:30 SkyScan query 14:00:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.295<-14953 Statuses=0008 0009 14:00:30 Msec=750 True Az=112.995 Ze=-44.295 Az status=0008 Ze status=0009 14:00:30 Check angles 14:00:30 SkyScan query 14:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.205<-16347 Statuses=0008 0009 14:00:31 Msec=1500 True Az=112.995 Ze=-65.205 Az status=0008 Ze status=0009 14:00:31 Check angles 14:00:31 SkyScan query 14:00:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 14:00:32 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 14:00:32 Check angles 14:00:32 SkyScan query 14:00:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.045<-19203 Statuses=0008 0009 14:00:32 Msec=3000 True Az=112.995 Ze=-108.045 Az status=0008 Ze status=0009 14:00:33 Check angles 14:00:33 SkyScan query 14:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.97<-20598 Statuses=0008 0009 14:00:33 Msec=3750 True Az=112.995 Ze=-128.97 Az status=0008 Ze status=0009 14:00:33 Check angles 14:00:33 SkyScan query 14:00:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.33<-22022 Statuses=0008 0009 14:00:34 Msec=4500 True Az=112.995 Ze=-150.33 Az status=0008 Ze status=0009 14:00:34 Check angles 14:00:34 SkyScan query 14:00:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.435<-23429 Statuses=0008 0009 14:00:35 Msec=5250 True Az=112.995 Ze=-171.435 Az status=0008 Ze status=0009 14:00:35 Check angles 14:00:35 SkyScan query 14:00:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:00:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:00:35 Message to Master queued w/err=0: serial=108199 error=0 14:00:40 Received message from Master: op=Filter serial=108200 14:00:40 Color wheel filter change from 0 to 0 14:00:40 FLIGetFilterPos err=0 currentPosition=0 14:00:40 FLIGetStepsRemaining err=0 RemainingSteps=0 14:00:40 Filter is already there-color wheel unchanged 14:00:41 Received message from Master: op=Shutter serial=108201 14:00:41 Shutter LASER open 14:00:41 Received message from Camera: op=State serial=108203 14:00:41 GetSingleValue result=40 Value=cccccccc 14:00:41 SkyScan query 14:00:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:00:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:41 Parameters OK 14:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:41 Set A/D data flow result=40 14:00:41 Set A/D channel type result=40 14:00:41 Set A/D encoding result=40 14:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:41 Set channel filter=0.000000e+000 result=40 14:00:41 Config A/D Result=40 14:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:41 Get A/D filter: -9.255963e+061 result=40 14:00:41 Get A/D value=-858993460 result=40 14:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:41 Parameters OK 14:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:41 Set A/D data flow result=40 14:00:41 Set A/D channel type result=40 14:00:41 Set A/D encoding result=40 14:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:41 Set channel filter=0.000000e+000 result=40 14:00:41 Config A/D Result=40 14:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:41 Get A/D filter: -9.255963e+061 result=40 14:00:41 Get A/D value=-858993460 result=40 14:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:00:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:00:41 Aux= 14:00:41 Message to Camera, serial 108203 queued 14:00:50 Received message from Master: op=Shutter serial=108213 14:00:50 Shutter LASER close 14:00:50 Received message from Master: op=PointingHead serial=108217 14:00:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:00:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:00:51 Point started: ret=0 14:00:51 point_skyscan result=0 14:00:52 Check angles 14:00:52 SkyScan query 14:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.01<-21534 Statuses=0008 0009 14:00:52 Msec=0 True Az=112.995 Ze=-143.01 Az status=0008 Ze status=0009 14:00:52 Check angles 14:00:52 SkyScan query 14:00:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 14:00:53 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 14:00:53 Check angles 14:00:53 SkyScan query 14:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 14:00:54 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 14:00:54 Check angles 14:00:54 SkyScan query 14:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 14:00:54 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 14:00:55 Check angles 14:00:55 SkyScan query 14:00:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 14:00:55 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 14:00:55 Check angles 14:00:55 SkyScan query 14:00:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.16<-14544 Statuses=0008 0009 14:00:56 Msec=3750 True Az=112.995 Ze=-38.16 Az status=0008 Ze status=0009 14:00:56 Check angles 14:00:56 SkyScan query 14:00:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.22<-13148 Statuses=0008 0009 14:00:57 Msec=4500 True Az=112.995 Ze=-17.22 Az status=0008 Ze status=0009 14:00:57 Check angles 14:00:57 SkyScan query 14:00:57 SkyScan query done: ret=0 az=112.995<-7533 ze=3.75<-11750 Statuses=0008 0009 14:00:57 Msec=5250 True Az=112.995 Ze=3.75 Az status=0008 Ze status=0009 14:00:58 Check angles 14:00:58 SkyScan query 14:00:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:00:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:00:58 Message to Master queued w/err=0: serial=108217 error=0 14:01:03 Received message from Master: op=Filter serial=108218 14:01:03 Color wheel filter change from 0 to 0 14:01:03 FLIGetFilterPos err=0 currentPosition=0 14:01:03 FLIGetStepsRemaining err=0 RemainingSteps=0 14:01:03 Filter is already there-color wheel unchanged 14:01:03 Received message from Master: op=Shutter serial=108219 14:01:03 Shutter LASER close 14:01:03 Received message from Camera: op=State serial=108221 14:01:03 GetSingleValue result=40 Value=cccccccc 14:01:03 SkyScan query 14:01:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:01:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:04 Parameters OK 14:01:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:04 Set A/D data flow result=40 14:01:04 Set A/D channel type result=40 14:01:04 Set A/D encoding result=40 14:01:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:04 Set channel filter=0.000000e+000 result=40 14:01:04 Config A/D Result=40 14:01:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:04 Get A/D filter: -9.255963e+061 result=40 14:01:04 Get A/D value=-858993460 result=40 14:01:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:04 Parameters OK 14:01:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:04 Set A/D data flow result=40 14:01:04 Set A/D channel type result=40 14:01:04 Set A/D encoding result=40 14:01:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:04 Set channel filter=0.000000e+000 result=40 14:01:04 Config A/D Result=40 14:01:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:04 Get A/D filter: -9.255963e+061 result=40 14:01:04 Get A/D value=-858993460 result=40 14:01:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:01:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:01:04 Aux= 14:01:04 Message to Camera, serial 108221 queued 14:01:41 Received message from Master: op=PointingHead serial=108234 14:01:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:01:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:01:41 Point started: ret=0 14:01:41 point_skyscan result=0 14:01:42 Check angles 14:01:42 SkyScan query 14:01:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:01:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:01:43 Message to Master queued w/err=0: serial=108234 error=0 14:01:48 Received message from Master: op=Filter serial=108235 14:01:48 Color wheel filter change from 0 to 0 14:01:48 FLIGetFilterPos err=0 currentPosition=0 14:01:48 FLIGetStepsRemaining err=0 RemainingSteps=0 14:01:48 Filter is already there-color wheel unchanged 14:01:48 Received message from Master: op=Shutter serial=108236 14:01:48 Shutter LASER close 14:01:48 Received message from Camera: op=State serial=108238 14:01:48 GetSingleValue result=40 Value=cccccccc 14:01:48 SkyScan query 14:01:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:01:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:48 Parameters OK 14:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:48 Set A/D data flow result=40 14:01:48 Set A/D channel type result=40 14:01:48 Set A/D encoding result=40 14:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:48 Set channel filter=0.000000e+000 result=40 14:01:48 Config A/D Result=40 14:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:48 Get A/D filter: -9.255963e+061 result=40 14:01:48 Get A/D value=-858993460 result=40 14:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:48 Parameters OK 14:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:48 Set A/D data flow result=40 14:01:48 Set A/D channel type result=40 14:01:48 Set A/D encoding result=40 14:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:48 Set channel filter=0.000000e+000 result=40 14:01:48 Config A/D Result=40 14:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:48 Get A/D filter: -9.255963e+061 result=40 14:01:48 Get A/D value=-858993460 result=40 14:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:01:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:01:48 Aux= 14:01:48 Message to Camera, serial 108238 queued 14:02:25 Received message from Master: op=PointingHead serial=108251 14:02:25 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:02:25 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:02:26 Point started: ret=0 14:02:26 point_skyscan result=0 14:02:26 Check angles 14:02:26 SkyScan query 14:02:27 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 14:02:27 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 14:02:27 Check angles 14:02:27 SkyScan query 14:02:28 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.51<-12434 Statuses=0009 0008 14:02:28 Msec=750 True Az=153.525 Ze=-6.51 Az status=0009 Ze status=0008 14:02:28 Check angles 14:02:28 SkyScan query 14:02:28 SkyScan query done: ret=0 az=171.39<-11426 ze=-6.495<-12433 Statuses=0009 0008 14:02:28 Msec=1500 True Az=171.39 Ze=-6.495 Az status=0009 Ze status=0008 14:02:29 Check angles 14:02:29 SkyScan query 14:02:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:02:29 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:02:29 Message to Master queued w/err=0: serial=108251 error=0 14:02:34 Received message from Master: op=Filter serial=108252 14:02:34 Color wheel filter change from 0 to 0 14:02:34 FLIGetFilterPos err=0 currentPosition=0 14:02:34 FLIGetStepsRemaining err=0 RemainingSteps=0 14:02:34 Filter is already there-color wheel unchanged 14:02:34 Received message from Master: op=Shutter serial=108253 14:02:34 Shutter LASER close 14:02:34 Received message from Camera: op=State serial=108255 14:02:34 GetSingleValue result=40 Value=cccccccc 14:02:34 SkyScan query 14:02:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:02:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:35 Parameters OK 14:02:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:35 Set A/D data flow result=40 14:02:35 Set A/D channel type result=40 14:02:35 Set A/D encoding result=40 14:02:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:35 Set channel filter=0.000000e+000 result=40 14:02:35 Config A/D Result=40 14:02:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:35 Get A/D filter: -9.255963e+061 result=40 14:02:35 Get A/D value=-858993460 result=40 14:02:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:35 Parameters OK 14:02:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:35 Set A/D data flow result=40 14:02:35 Set A/D channel type result=40 14:02:35 Set A/D encoding result=40 14:02:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:35 Set channel filter=0.000000e+000 result=40 14:02:35 Config A/D Result=40 14:02:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:35 Get A/D filter: -9.255963e+061 result=40 14:02:35 Get A/D value=-858993460 result=40 14:02:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:02:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:02:35 Aux= 14:02:35 Message to Camera, serial 108255 queued 14:03:12 Received message from Master: op=PointingHead serial=108268 14:03:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:03:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:03:12 Point started: ret=0 14:03:12 point_skyscan result=0 14:03:13 Check angles 14:03:13 SkyScan query 14:03:13 SkyScan query done: ret=0 az=152.685<-10179 ze=6.51<-11566 Statuses=0009 0008 14:03:13 Msec=0 True Az=152.685 Ze=6.51 Az status=0009 Ze status=0008 14:03:14 Check angles 14:03:14 SkyScan query 14:03:14 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 14:03:14 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 14:03:14 Check angles 14:03:14 SkyScan query 14:03:15 SkyScan query done: ret=0 az=117.72<-7848 ze=6.495<-11567 Statuses=0009 0008 14:03:15 Msec=1500 True Az=117.72 Ze=6.495 Az status=0009 Ze status=0008 14:03:15 Check angles 14:03:15 SkyScan query 14:03:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:03:16 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:03:16 Message to Master queued w/err=0: serial=108268 error=0 14:03:21 Received message from Master: op=Filter serial=108269 14:03:21 Color wheel filter change from 0 to 0 14:03:21 FLIGetFilterPos err=0 currentPosition=0 14:03:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:03:21 Filter is already there-color wheel unchanged 14:03:21 Received message from Master: op=Shutter serial=108270 14:03:21 Shutter LASER close 14:03:21 Received message from Camera: op=State serial=108272 14:03:21 GetSingleValue result=40 Value=cccccccc 14:03:21 SkyScan query 14:03:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:03:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:22 Parameters OK 14:03:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:22 Set A/D data flow result=40 14:03:22 Set A/D channel type result=40 14:03:22 Set A/D encoding result=40 14:03:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:22 Set channel filter=0.000000e+000 result=40 14:03:22 Config A/D Result=40 14:03:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:22 Get A/D filter: -9.255963e+061 result=40 14:03:22 Get A/D value=-858993460 result=40 14:03:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:22 Parameters OK 14:03:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:22 Set A/D data flow result=40 14:03:22 Set A/D channel type result=40 14:03:22 Set A/D encoding result=40 14:03:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:22 Set channel filter=0.000000e+000 result=40 14:03:22 Config A/D Result=40 14:03:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:22 Get A/D filter: -9.255963e+061 result=40 14:03:22 Get A/D value=-858993460 result=40 14:03:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:03:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:03:22 Aux= 14:03:22 Message to Camera, serial 108272 queued 14:03:38 Received message from Master: op=Identify serial=108273 [UTC 2019-3-4 14:03:50] 14:03:58 Received message from Master: op=PointingHead serial=108288 14:03:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:03:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:03:59 Point started: ret=0 14:03:59 point_skyscan result=0 14:03:59 Check angles 14:03:59 SkyScan query 14:04:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.19<-13546 Statuses=0008 0009 14:04:00 Msec=0 True Az=112.995 Ze=-23.19 Az status=0008 Ze status=0009 14:04:00 Check angles 14:04:00 SkyScan query 14:04:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 14:04:01 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 14:04:01 Check angles 14:04:01 SkyScan query 14:04:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 14:04:02 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 14:04:02 Check angles 14:04:02 SkyScan query 14:04:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 14:04:02 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 14:04:02 Check angles 14:04:02 SkyScan query 14:04:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.925<-19195 Statuses=0008 0009 14:04:03 Msec=3000 True Az=112.995 Ze=-107.925 Az status=0008 Ze status=0009 14:04:03 Check angles 14:04:03 SkyScan query 14:04:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.835<-20589 Statuses=0008 0009 14:04:04 Msec=3750 True Az=112.995 Ze=-128.835 Az status=0008 Ze status=0009 14:04:04 Check angles 14:04:04 SkyScan query 14:04:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.805<-21987 Statuses=0008 0009 14:04:05 Msec=4500 True Az=112.995 Ze=-149.805 Az status=0008 Ze status=0009 14:04:05 Check angles 14:04:05 SkyScan query 14:04:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.03<-23402 Statuses=0008 0009 14:04:05 Msec=5250 True Az=112.995 Ze=-171.03 Az status=0008 Ze status=0009 14:04:05 Check angles 14:04:05 SkyScan query 14:04:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:04:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:04:06 Message to Master queued w/err=0: serial=108288 error=0 14:04:11 Received message from Master: op=Filter serial=108289 14:04:11 Color wheel filter change from 0 to 0 14:04:11 FLIGetFilterPos err=0 currentPosition=0 14:04:11 FLIGetStepsRemaining err=0 RemainingSteps=0 14:04:11 Filter is already there-color wheel unchanged 14:04:11 Received message from Master: op=Shutter serial=108290 14:04:11 Shutter LASER open 14:04:11 Received message from Camera: op=State serial=108292 14:04:11 GetSingleValue result=40 Value=cccccccc 14:04:11 SkyScan query 14:04:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:04:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:12 Parameters OK 14:04:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:12 Set A/D data flow result=40 14:04:12 Set A/D channel type result=40 14:04:12 Set A/D encoding result=40 14:04:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:12 Set channel filter=0.000000e+000 result=40 14:04:12 Config A/D Result=40 14:04:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:12 Get A/D filter: -9.255963e+061 result=40 14:04:12 Get A/D value=-858993460 result=40 14:04:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:12 Parameters OK 14:04:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:12 Set A/D data flow result=40 14:04:12 Set A/D channel type result=40 14:04:12 Set A/D encoding result=40 14:04:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:12 Set channel filter=0.000000e+000 result=40 14:04:12 Config A/D Result=40 14:04:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:12 Get A/D filter: -9.255963e+061 result=40 14:04:12 Get A/D value=-858993460 result=40 14:04:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:04:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:04:12 Aux= 14:04:12 Message to Camera, serial 108292 queued 14:04:20 Received message from Master: op=Shutter serial=108302 14:04:20 Shutter LASER close 14:04:21 Received message from Master: op=PointingHead serial=108306 14:04:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:04:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:04:21 Point started: ret=0 14:04:21 point_skyscan result=0 14:04:22 Check angles 14:04:22 SkyScan query 14:04:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 14:04:23 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 14:04:23 Check angles 14:04:23 SkyScan query 14:04:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.755<-20117 Statuses=0008 0009 14:04:23 Msec=750 True Az=112.995 Ze=-121.755 Az status=0008 Ze status=0009 14:04:23 Check angles 14:04:23 SkyScan query 14:04:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.83<-18722 Statuses=0008 0009 14:04:24 Msec=1500 True Az=112.995 Ze=-100.83 Az status=0008 Ze status=0009 14:04:24 Check angles 14:04:24 SkyScan query 14:04:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.86<-17324 Statuses=0008 0009 14:04:25 Msec=2250 True Az=112.995 Ze=-79.86 Az status=0008 Ze status=0009 14:04:25 Check angles 14:04:25 SkyScan query 14:04:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.905<-15927 Statuses=0008 0009 14:04:26 Msec=3000 True Az=112.995 Ze=-58.905 Az status=0008 Ze status=0009 14:04:26 Check angles 14:04:26 SkyScan query 14:04:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.89<-14526 Statuses=0008 0009 14:04:26 Msec=3750 True Az=112.995 Ze=-37.89 Az status=0008 Ze status=0009 14:04:26 Check angles 14:04:26 SkyScan query 14:04:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.965<-13131 Statuses=0008 0009 14:04:27 Msec=4500 True Az=112.995 Ze=-16.965 Az status=0008 Ze status=0009 14:04:27 Check angles 14:04:27 SkyScan query 14:04:28 SkyScan query done: ret=0 az=112.995<-7533 ze=3.99<-11734 Statuses=0008 0009 14:04:28 Msec=5250 True Az=112.995 Ze=3.99 Az status=0008 Ze status=0009 14:04:28 Check angles 14:04:28 SkyScan query 14:04:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:04:29 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:04:29 Message to Master queued w/err=0: serial=108306 error=0 14:04:34 Received message from Master: op=Filter serial=108307 14:04:34 Color wheel filter change from 0 to 0 14:04:34 FLIGetFilterPos err=0 currentPosition=0 14:04:34 FLIGetStepsRemaining err=0 RemainingSteps=0 14:04:34 Filter is already there-color wheel unchanged 14:04:34 Received message from Master: op=Shutter serial=108308 14:04:34 Shutter LASER close 14:04:34 Received message from Camera: op=State serial=108310 14:04:34 GetSingleValue result=40 Value=cccccccc 14:04:34 SkyScan query 14:04:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:04:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:34 Parameters OK 14:04:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:34 Set A/D data flow result=40 14:04:34 Set A/D channel type result=40 14:04:34 Set A/D encoding result=40 14:04:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:34 Set channel filter=0.000000e+000 result=40 14:04:34 Config A/D Result=40 14:04:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:34 Get A/D filter: -9.255963e+061 result=40 14:04:34 Get A/D value=-858993460 result=40 14:04:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:34 Parameters OK 14:04:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:34 Set A/D data flow result=40 14:04:34 Set A/D channel type result=40 14:04:34 Set A/D encoding result=40 14:04:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:34 Set channel filter=0.000000e+000 result=40 14:04:34 Config A/D Result=40 14:04:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:34 Get A/D filter: -9.255963e+061 result=40 14:04:34 Get A/D value=-858993460 result=40 14:04:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:04:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:04:34 Aux= 14:04:34 Message to Camera, serial 108310 queued 14:05:11 Received message from Master: op=PointingHead serial=108323 14:05:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:05:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:05:12 Point started: ret=0 14:05:12 point_skyscan result=0 14:05:12 Check angles 14:05:12 SkyScan query 14:05:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:05:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:05:13 Message to Master queued w/err=0: serial=108323 error=0 14:05:18 Received message from Master: op=Filter serial=108324 14:05:18 Color wheel filter change from 0 to 0 14:05:18 FLIGetFilterPos err=0 currentPosition=0 14:05:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:05:18 Filter is already there-color wheel unchanged 14:05:18 Received message from Master: op=Shutter serial=108325 14:05:18 Shutter LASER close 14:05:18 Received message from Camera: op=State serial=108327 14:05:18 GetSingleValue result=40 Value=cccccccc 14:05:18 SkyScan query 14:05:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:05:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:19 Parameters OK 14:05:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:19 Set A/D data flow result=40 14:05:19 Set A/D channel type result=40 14:05:19 Set A/D encoding result=40 14:05:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:19 Set channel filter=0.000000e+000 result=40 14:05:19 Config A/D Result=40 14:05:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:19 Get A/D filter: -9.255963e+061 result=40 14:05:19 Get A/D value=-858993460 result=40 14:05:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:19 Parameters OK 14:05:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:19 Set A/D data flow result=40 14:05:19 Set A/D channel type result=40 14:05:19 Set A/D encoding result=40 14:05:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:19 Set channel filter=0.000000e+000 result=40 14:05:19 Config A/D Result=40 14:05:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:19 Get A/D filter: -9.255963e+061 result=40 14:05:19 Get A/D value=-858993460 result=40 14:05:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:05:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:05:19 Aux= 14:05:19 Message to Camera, serial 108327 queued 14:05:56 Received message from Master: op=PointingHead serial=108340 14:05:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:05:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:05:56 Point started: ret=0 14:05:56 point_skyscan result=0 14:05:57 Check angles 14:05:57 SkyScan query 14:05:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:05:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:05:57 Message to Master queued w/err=0: serial=108340 error=0 14:06:02 Received message from Master: op=Filter serial=108341 14:06:02 Color wheel filter change from 0 to 0 14:06:02 FLIGetFilterPos err=0 currentPosition=0 14:06:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:02 Filter is already there-color wheel unchanged 14:06:03 Received message from Master: op=Shutter serial=108342 14:06:03 Shutter LASER close 14:06:03 Received message from Camera: op=State serial=108344 14:06:03 GetSingleValue result=40 Value=cccccccc 14:06:03 SkyScan query 14:06:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:06:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:03 Parameters OK 14:06:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:03 Set A/D data flow result=40 14:06:03 Set A/D channel type result=40 14:06:03 Set A/D encoding result=40 14:06:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:03 Set channel filter=0.000000e+000 result=40 14:06:03 Config A/D Result=40 14:06:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:03 Get A/D filter: -9.255963e+061 result=40 14:06:03 Get A/D value=-858993460 result=40 14:06:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:03 Parameters OK 14:06:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:03 Set A/D data flow result=40 14:06:03 Set A/D channel type result=40 14:06:03 Set A/D encoding result=40 14:06:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:03 Set channel filter=0.000000e+000 result=40 14:06:03 Config A/D Result=40 14:06:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:03 Get A/D filter: -9.255963e+061 result=40 14:06:03 Get A/D value=-858993460 result=40 14:06:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:03 Aux= 14:06:03 Message to Camera, serial 108344 queued 14:06:40 Received message from Master: op=PointingHead serial=108357 14:06:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:06:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:06:40 Point started: ret=0 14:06:40 point_skyscan result=0 14:06:41 Check angles 14:06:41 SkyScan query 14:06:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:06:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:06:42 Message to Master queued w/err=0: serial=108357 error=0 14:06:47 Received message from Master: op=Filter serial=108358 14:06:47 Color wheel filter change from 0 to 0 14:06:47 FLIGetFilterPos err=0 currentPosition=0 14:06:47 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:47 Filter is already there-color wheel unchanged 14:06:47 Received message from Master: op=Shutter serial=108359 14:06:47 Shutter LASER close 14:06:47 Received message from Camera: op=State serial=108361 14:06:47 GetSingleValue result=40 Value=cccccccc 14:06:47 SkyScan query 14:06:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:06:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:47 Parameters OK 14:06:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:47 Set A/D data flow result=40 14:06:47 Set A/D channel type result=40 14:06:47 Set A/D encoding result=40 14:06:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:47 Set channel filter=0.000000e+000 result=40 14:06:47 Config A/D Result=40 14:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:47 Get A/D filter: -9.255963e+061 result=40 14:06:47 Get A/D value=-858993460 result=40 14:06:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:47 Parameters OK 14:06:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:47 Set A/D data flow result=40 14:06:47 Set A/D channel type result=40 14:06:47 Set A/D encoding result=40 14:06:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:47 Set channel filter=0.000000e+000 result=40 14:06:47 Config A/D Result=40 14:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:47 Get A/D filter: -9.255963e+061 result=40 14:06:47 Get A/D value=-858993460 result=40 14:06:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:47 Aux= 14:06:47 Message to Camera, serial 108361 queued 14:07:24 Received message from Master: op=PointingHead serial=108374 14:07:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:07:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:07:25 Point started: ret=0 14:07:25 point_skyscan result=0 14:07:25 Check angles 14:07:25 SkyScan query 14:07:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 14:07:26 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 14:07:26 Check angles 14:07:26 SkyScan query 14:07:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.31<-14954 Statuses=0008 0009 14:07:27 Msec=750 True Az=112.995 Ze=-44.31 Az status=0008 Ze status=0009 14:07:27 Check angles 14:07:27 SkyScan query 14:07:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 14:07:27 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 14:07:28 Check angles 14:07:28 SkyScan query 14:07:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.175<-17745 Statuses=0008 0009 14:07:28 Msec=2250 True Az=112.995 Ze=-86.175 Az status=0008 Ze status=0009 14:07:28 Check angles 14:07:28 SkyScan query 14:07:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.115<-19141 Statuses=0008 0009 14:07:29 Msec=3000 True Az=112.995 Ze=-107.115 Az status=0008 Ze status=0009 14:07:29 Check angles 14:07:29 SkyScan query 14:07:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.085<-20539 Statuses=0008 0009 14:07:30 Msec=3750 True Az=112.995 Ze=-128.085 Az status=0008 Ze status=0009 14:07:30 Check angles 14:07:30 SkyScan query 14:07:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.055<-21937 Statuses=0008 0009 14:07:30 Msec=4500 True Az=112.995 Ze=-149.055 Az status=0008 Ze status=0009 14:07:31 Check angles 14:07:31 SkyScan query 14:07:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.01<-23334 Statuses=0008 0009 14:07:31 Msec=5250 True Az=112.995 Ze=-170.01 Az status=0008 Ze status=0009 14:07:31 Check angles 14:07:31 SkyScan query 14:07:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:07:32 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:07:32 Message to Master queued w/err=0: serial=108374 error=0 14:07:37 Received message from Master: op=Filter serial=108375 14:07:37 Color wheel filter change from 0 to 0 14:07:37 FLIGetFilterPos err=0 currentPosition=0 14:07:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:07:37 Filter is already there-color wheel unchanged 14:07:37 Received message from Master: op=Shutter serial=108376 14:07:37 Shutter LASER open 14:07:37 Received message from Camera: op=State serial=108378 14:07:37 GetSingleValue result=40 Value=cccccccc 14:07:37 SkyScan query 14:07:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:07:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:38 Parameters OK 14:07:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:38 Set A/D data flow result=40 14:07:38 Set A/D channel type result=40 14:07:38 Set A/D encoding result=40 14:07:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:38 Set channel filter=0.000000e+000 result=40 14:07:38 Config A/D Result=40 14:07:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:38 Get A/D filter: -9.255963e+061 result=40 14:07:38 Get A/D value=-858993460 result=40 14:07:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:38 Parameters OK 14:07:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:38 Set A/D data flow result=40 14:07:38 Set A/D channel type result=40 14:07:38 Set A/D encoding result=40 14:07:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:38 Set channel filter=0.000000e+000 result=40 14:07:38 Config A/D Result=40 14:07:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:38 Get A/D filter: -9.255963e+061 result=40 14:07:38 Get A/D value=-858993460 result=40 14:07:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:07:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:07:38 Aux= 14:07:38 Message to Camera, serial 108378 queued 14:07:46 Received message from Master: op=Shutter serial=108388 14:07:46 Shutter LASER close 14:07:47 Received message from Master: op=PointingHead serial=108392 14:07:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:07:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:07:47 Point started: ret=0 14:07:47 point_skyscan result=0 14:07:48 Check angles 14:07:48 SkyScan query 14:07:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.98<-21532 Statuses=0008 0009 14:07:49 Msec=0 True Az=112.995 Ze=-142.98 Az status=0008 Ze status=0009 14:07:49 Check angles 14:07:49 SkyScan query 14:07:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.545<-20103 Statuses=0008 0009 14:07:49 Msec=750 True Az=112.995 Ze=-121.545 Az status=0008 Ze status=0009 14:07:50 Check angles 14:07:50 SkyScan query 14:07:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.59<-18706 Statuses=0008 0009 14:07:50 Msec=1500 True Az=112.995 Ze=-100.59 Az status=0008 Ze status=0009 14:07:50 Check angles 14:07:50 SkyScan query 14:07:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.62<-17308 Statuses=0008 0009 14:07:51 Msec=2250 True Az=112.995 Ze=-79.62 Az status=0008 Ze status=0009 14:07:51 Check angles 14:07:51 SkyScan query 14:07:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.215<-15881 Statuses=0008 0009 14:07:52 Msec=3000 True Az=112.995 Ze=-58.215 Az status=0008 Ze status=0009 14:07:52 Check angles 14:07:52 SkyScan query 14:07:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.9<-14460 Statuses=0008 0009 14:07:52 Msec=3750 True Az=112.995 Ze=-36.9 Az status=0008 Ze status=0009 14:07:53 Check angles 14:07:53 SkyScan query 14:07:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.915<-13061 Statuses=0008 0009 14:07:53 Msec=4500 True Az=112.995 Ze=-15.915 Az status=0008 Ze status=0009 14:07:53 Check angles 14:07:53 SkyScan query 14:07:54 SkyScan query done: ret=0 az=112.995<-7533 ze=4.8<-11680 Statuses=0008 0009 14:07:54 Msec=5250 True Az=112.995 Ze=4.8 Az status=0008 Ze status=0009 14:07:54 Check angles 14:07:54 SkyScan query 14:07:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:07:55 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:07:55 Message to Master queued w/err=0: serial=108392 error=0 14:08:00 Received message from Master: op=Filter serial=108393 14:08:00 Color wheel filter change from 0 to 0 14:08:00 FLIGetFilterPos err=0 currentPosition=0 14:08:00 FLIGetStepsRemaining err=0 RemainingSteps=0 14:08:00 Filter is already there-color wheel unchanged 14:08:00 Received message from Master: op=Shutter serial=108394 14:08:00 Shutter LASER close 14:08:00 Received message from Camera: op=State serial=108396 14:08:00 GetSingleValue result=40 Value=cccccccc 14:08:00 SkyScan query 14:08:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:08:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:01 Parameters OK 14:08:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:01 Set A/D data flow result=40 14:08:01 Set A/D channel type result=40 14:08:01 Set A/D encoding result=40 14:08:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:01 Set channel filter=0.000000e+000 result=40 14:08:01 Config A/D Result=40 14:08:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:01 Get A/D filter: -9.255963e+061 result=40 14:08:01 Get A/D value=-858993460 result=40 14:08:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:01 Parameters OK 14:08:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:01 Set A/D data flow result=40 14:08:01 Set A/D channel type result=40 14:08:01 Set A/D encoding result=40 14:08:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:01 Set channel filter=0.000000e+000 result=40 14:08:01 Config A/D Result=40 14:08:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:01 Get A/D filter: -9.255963e+061 result=40 14:08:01 Get A/D value=-858993460 result=40 14:08:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:01 Aux= 14:08:01 Message to Camera, serial 108396 queued 14:08:37 Received message from Master: op=PointingHead serial=108409 14:08:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:08:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:08:38 Point started: ret=0 14:08:38 point_skyscan result=0 14:08:38 Check angles 14:08:38 SkyScan query 14:08:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:08:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:08:39 Message to Master queued w/err=0: serial=108409 error=0 14:08:44 Received message from Master: op=Filter serial=108410 14:08:44 Color wheel filter change from 0 to 0 14:08:44 FLIGetFilterPos err=0 currentPosition=0 14:08:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:08:44 Filter is already there-color wheel unchanged 14:08:44 Received message from Master: op=Shutter serial=108411 14:08:44 Shutter LASER close 14:08:44 Received message from Camera: op=State serial=108413 14:08:44 GetSingleValue result=40 Value=cccccccc 14:08:44 SkyScan query 14:08:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:08:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:45 Parameters OK 14:08:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:45 Set A/D data flow result=40 14:08:45 Set A/D channel type result=40 14:08:45 Set A/D encoding result=40 14:08:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:45 Set channel filter=0.000000e+000 result=40 14:08:45 Config A/D Result=40 14:08:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:45 Get A/D filter: -9.255963e+061 result=40 14:08:45 Get A/D value=-858993460 result=40 14:08:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:45 Parameters OK 14:08:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:45 Set A/D data flow result=40 14:08:45 Set A/D channel type result=40 14:08:45 Set A/D encoding result=40 14:08:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:45 Set channel filter=0.000000e+000 result=40 14:08:45 Config A/D Result=40 14:08:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:45 Get A/D filter: -9.255963e+061 result=40 14:08:45 Get A/D value=-858993460 result=40 14:08:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:45 Aux= 14:08:45 Message to Camera, serial 108413 queued 14:09:22 Received message from Master: op=PointingHead serial=108426 14:09:22 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:09:22 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:09:22 Point started: ret=0 14:09:22 point_skyscan result=0 14:09:23 Check angles 14:09:23 SkyScan query 14:09:23 SkyScan query done: ret=0 az=135.795<-9053 ze=-6.51<-12434 Statuses=0009 0008 14:09:23 Msec=0 True Az=135.795 Ze=-6.51 Az status=0009 Ze status=0008 14:09:24 Check angles 14:09:24 SkyScan query 14:09:24 SkyScan query done: ret=0 az=153.345<-10223 ze=-6.51<-12434 Statuses=0009 0008 14:09:24 Msec=750 True Az=153.345 Ze=-6.51 Az status=0009 Ze status=0008 14:09:24 Check angles 14:09:24 SkyScan query 14:09:25 SkyScan query done: ret=0 az=170.79<-11386 ze=-6.495<-12433 Statuses=0009 0008 14:09:25 Msec=1500 True Az=170.79 Ze=-6.495 Az status=0009 Ze status=0008 14:09:25 Check angles 14:09:25 SkyScan query 14:09:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:09:26 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:09:26 Message to Master queued w/err=0: serial=108426 error=0 14:09:31 Received message from Master: op=Filter serial=108427 14:09:31 Color wheel filter change from 0 to 0 14:09:31 FLIGetFilterPos err=0 currentPosition=0 14:09:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:09:31 Filter is already there-color wheel unchanged 14:09:31 Received message from Master: op=Shutter serial=108428 14:09:31 Shutter LASER close 14:09:31 Received message from Camera: op=State serial=108430 14:09:31 GetSingleValue result=40 Value=cccccccc 14:09:31 SkyScan query 14:09:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:09:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:31 Parameters OK 14:09:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:31 Set A/D data flow result=40 14:09:31 Set A/D channel type result=40 14:09:31 Set A/D encoding result=40 14:09:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:31 Set channel filter=0.000000e+000 result=40 14:09:31 Config A/D Result=40 14:09:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:31 Get A/D filter: -9.255963e+061 result=40 14:09:31 Get A/D value=-858993460 result=40 14:09:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:31 Parameters OK 14:09:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:31 Set A/D data flow result=40 14:09:31 Set A/D channel type result=40 14:09:31 Set A/D encoding result=40 14:09:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:31 Set channel filter=0.000000e+000 result=40 14:09:31 Config A/D Result=40 14:09:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:31 Get A/D filter: -9.255963e+061 result=40 14:09:31 Get A/D value=-858993460 result=40 14:09:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:09:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:09:31 Aux= 14:09:31 Message to Camera, serial 108430 queued 14:10:07 Received message from Master: op=PointingHead serial=108442 14:10:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:10:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:10:08 Point started: ret=0 14:10:08 point_skyscan result=0 14:10:08 Check angles 14:10:08 SkyScan query 14:10:09 SkyScan query done: ret=0 az=152.85<-10190 ze=6.51<-11566 Statuses=0009 0008 14:10:09 Msec=0 True Az=152.85 Ze=6.51 Az status=0009 Ze status=0008 14:10:09 Check angles 14:10:09 SkyScan query 14:10:10 SkyScan query done: ret=0 az=135.405<-9027 ze=6.495<-11567 Statuses=0009 0008 14:10:10 Msec=750 True Az=135.405 Ze=6.495 Az status=0009 Ze status=0008 14:10:10 Check angles 14:10:10 SkyScan query 14:10:10 SkyScan query done: ret=0 az=117.93<-7862 ze=6.495<-11567 Statuses=0009 0008 14:10:10 Msec=1500 True Az=117.93 Ze=6.495 Az status=0009 Ze status=0008 14:10:11 Check angles 14:10:11 SkyScan query 14:10:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:10:11 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:10:11 Message to Master queued w/err=0: serial=108442 error=0 14:10:16 Received message from Master: op=Filter serial=108443 14:10:16 Color wheel filter change from 0 to 0 14:10:16 FLIGetFilterPos err=0 currentPosition=0 14:10:16 FLIGetStepsRemaining err=0 RemainingSteps=0 14:10:16 Filter is already there-color wheel unchanged 14:10:16 Received message from Master: op=Shutter serial=108444 14:10:16 Shutter LASER close 14:10:16 Received message from Camera: op=State serial=108446 14:10:16 GetSingleValue result=40 Value=cccccccc 14:10:16 SkyScan query 14:10:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:10:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:17 Parameters OK 14:10:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:17 Set A/D data flow result=40 14:10:17 Set A/D channel type result=40 14:10:17 Set A/D encoding result=40 14:10:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:17 Set channel filter=0.000000e+000 result=40 14:10:17 Config A/D Result=40 14:10:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:17 Get A/D filter: -9.255963e+061 result=40 14:10:17 Get A/D value=-858993460 result=40 14:10:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:17 Parameters OK 14:10:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:17 Set A/D data flow result=40 14:10:17 Set A/D channel type result=40 14:10:17 Set A/D encoding result=40 14:10:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:17 Set channel filter=0.000000e+000 result=40 14:10:17 Config A/D Result=40 14:10:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:17 Get A/D filter: -9.255963e+061 result=40 14:10:17 Get A/D value=-858993460 result=40 14:10:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:10:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:10:17 Aux= 14:10:17 Message to Camera, serial 108446 queued 14:10:54 Received message from Master: op=PointingHead serial=108459 14:10:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:10:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:10:54 Point started: ret=0 14:10:54 point_skyscan result=0 14:10:55 Check angles 14:10:55 SkyScan query 14:10:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 14:10:56 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 14:10:56 Check angles 14:10:56 SkyScan query 14:10:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 14:10:56 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 14:10:56 Check angles 14:10:56 SkyScan query 14:10:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 14:10:57 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 14:10:57 Check angles 14:10:57 SkyScan query 14:10:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.985<-17799 Statuses=0008 0009 14:10:58 Msec=2250 True Az=112.995 Ze=-86.985 Az status=0008 Ze status=0009 14:10:58 Check angles 14:10:58 SkyScan query 14:10:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.985<-19199 Statuses=0008 0009 14:10:59 Msec=3000 True Az=112.995 Ze=-107.985 Az status=0008 Ze status=0009 14:10:59 Check angles 14:10:59 SkyScan query 14:10:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.895<-20593 Statuses=0008 0009 14:10:59 Msec=3750 True Az=112.995 Ze=-128.895 Az status=0008 Ze status=0009 14:10:59 Check angles 14:10:59 SkyScan query 14:11:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.865<-21991 Statuses=0008 0009 14:11:00 Msec=4500 True Az=112.995 Ze=-149.865 Az status=0008 Ze status=0009 14:11:00 Check angles 14:11:00 SkyScan query 14:11:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.76<-23384 Statuses=0008 0009 14:11:01 Msec=5250 True Az=112.995 Ze=-170.76 Az status=0008 Ze status=0009 14:11:01 Check angles 14:11:01 SkyScan query 14:11:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:11:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:11:02 Message to Master queued w/err=0: serial=108459 error=0 14:11:07 Received message from Master: op=Filter serial=108460 14:11:07 Color wheel filter change from 0 to 0 14:11:07 FLIGetFilterPos err=0 currentPosition=0 14:11:07 FLIGetStepsRemaining err=0 RemainingSteps=0 14:11:07 Filter is already there-color wheel unchanged 14:11:07 Received message from Master: op=Shutter serial=108461 14:11:07 Shutter LASER open 14:11:07 Received message from Camera: op=State serial=108463 14:11:07 GetSingleValue result=40 Value=cccccccc 14:11:07 SkyScan query 14:11:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:11:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:07 Parameters OK 14:11:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:07 Set A/D data flow result=40 14:11:07 Set A/D channel type result=40 14:11:07 Set A/D encoding result=40 14:11:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:07 Set channel filter=0.000000e+000 result=40 14:11:07 Config A/D Result=40 14:11:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:07 Get A/D filter: -9.255963e+061 result=40 14:11:07 Get A/D value=-858993460 result=40 14:11:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:07 Parameters OK 14:11:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:07 Set A/D data flow result=40 14:11:07 Set A/D channel type result=40 14:11:07 Set A/D encoding result=40 14:11:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:07 Set channel filter=0.000000e+000 result=40 14:11:07 Config A/D Result=40 14:11:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:07 Get A/D filter: -9.255963e+061 result=40 14:11:07 Get A/D value=-858993460 result=40 14:11:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:11:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:11:07 Aux= 14:11:07 Message to Camera, serial 108463 queued 14:11:16 Received message from Master: op=Shutter serial=108473 14:11:16 Shutter LASER close 14:11:16 Received message from Master: op=PointingHead serial=108477 14:11:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:11:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:11:17 Point started: ret=0 14:11:17 point_skyscan result=0 14:11:17 Check angles 14:11:17 SkyScan query 14:11:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.01<-21534 Statuses=0008 0009 14:11:18 Msec=0 True Az=112.995 Ze=-143.01 Az status=0008 Ze status=0009 14:11:18 Check angles 14:11:18 SkyScan query 14:11:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 14:11:19 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 14:11:19 Check angles 14:11:19 SkyScan query 14:11:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 14:11:20 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 14:11:20 Check angles 14:11:20 SkyScan query 14:11:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 14:11:20 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 14:11:20 Check angles 14:11:20 SkyScan query 14:11:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 14:11:21 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 14:11:21 Check angles 14:11:21 SkyScan query 14:11:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.725<-14515 Statuses=0008 0009 14:11:22 Msec=3750 True Az=112.995 Ze=-37.725 Az status=0008 Ze status=0009 14:11:22 Check angles 14:11:22 SkyScan query 14:11:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.785<-13119 Statuses=0008 0009 14:11:23 Msec=4500 True Az=112.995 Ze=-16.785 Az status=0008 Ze status=0009 14:11:23 Check angles 14:11:23 SkyScan query 14:11:23 SkyScan query done: ret=0 az=113.01<-7534 ze=4.14<-11724 Statuses=0008 0009 14:11:23 Msec=5250 True Az=113.01 Ze=4.14 Az status=0008 Ze status=0009 14:11:23 Check angles 14:11:23 SkyScan query 14:11:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:11:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:11:24 Message to Master queued w/err=0: serial=108477 error=0 14:11:29 Received message from Master: op=Filter serial=108478 14:11:29 Color wheel filter change from 0 to 0 14:11:29 FLIGetFilterPos err=0 currentPosition=0 14:11:29 FLIGetStepsRemaining err=0 RemainingSteps=0 14:11:29 Filter is already there-color wheel unchanged 14:11:29 Received message from Master: op=Shutter serial=108479 14:11:29 Shutter LASER close 14:11:29 Received message from Camera: op=State serial=108481 14:11:29 GetSingleValue result=40 Value=cccccccc 14:11:29 SkyScan query 14:11:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:11:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:30 Parameters OK 14:11:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:30 Set A/D data flow result=40 14:11:30 Set A/D channel type result=40 14:11:30 Set A/D encoding result=40 14:11:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:30 Set channel filter=0.000000e+000 result=40 14:11:30 Config A/D Result=40 14:11:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:30 Get A/D filter: -9.255963e+061 result=40 14:11:30 Get A/D value=-858993460 result=40 14:11:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:30 Parameters OK 14:11:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:30 Set A/D data flow result=40 14:11:30 Set A/D channel type result=40 14:11:30 Set A/D encoding result=40 14:11:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:30 Set channel filter=0.000000e+000 result=40 14:11:30 Config A/D Result=40 14:11:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:30 Get A/D filter: -9.255963e+061 result=40 14:11:30 Get A/D value=-858993460 result=40 14:11:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:11:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:11:30 Aux= 14:11:30 Message to Camera, serial 108481 queued 14:12:07 Received message from Master: op=PointingHead serial=108494 14:12:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:12:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:12:07 Point started: ret=0 14:12:07 point_skyscan result=0 14:12:08 Check angles 14:12:08 SkyScan query 14:12:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:12:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:12:08 Message to Master queued w/err=0: serial=108494 error=0 14:12:13 Received message from Master: op=Filter serial=108495 14:12:13 Color wheel filter change from 0 to 0 14:12:13 FLIGetFilterPos err=0 currentPosition=0 14:12:13 FLIGetStepsRemaining err=0 RemainingSteps=0 14:12:13 Filter is already there-color wheel unchanged 14:12:14 Received message from Master: op=Shutter serial=108496 14:12:14 Shutter LASER close 14:12:14 Received message from Camera: op=State serial=108498 14:12:14 GetSingleValue result=40 Value=cccccccc 14:12:14 SkyScan query 14:12:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:12:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:14 Parameters OK 14:12:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:14 Set A/D data flow result=40 14:12:14 Set A/D channel type result=40 14:12:14 Set A/D encoding result=40 14:12:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:14 Set channel filter=0.000000e+000 result=40 14:12:14 Config A/D Result=40 14:12:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:14 Get A/D filter: -9.255963e+061 result=40 14:12:14 Get A/D value=-858993460 result=40 14:12:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:14 Parameters OK 14:12:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:14 Set A/D data flow result=40 14:12:14 Set A/D channel type result=40 14:12:14 Set A/D encoding result=40 14:12:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:14 Set channel filter=0.000000e+000 result=40 14:12:14 Config A/D Result=40 14:12:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:14 Get A/D filter: -9.255963e+061 result=40 14:12:14 Get A/D value=-858993460 result=40 14:12:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:12:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:12:14 Aux= 14:12:14 Message to Camera, serial 108498 queued 14:12:51 Received message from Master: op=PointingHead serial=108511 14:12:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:12:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:12:51 Point started: ret=0 14:12:51 point_skyscan result=0 14:12:52 Check angles 14:12:52 SkyScan query 14:12:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:12:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:12:53 Message to Master queued w/err=0: serial=108511 error=0 14:12:58 Received message from Master: op=Filter serial=108512 14:12:58 Color wheel filter change from 0 to 0 14:12:58 FLIGetFilterPos err=0 currentPosition=0 14:12:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:12:58 Filter is already there-color wheel unchanged 14:12:58 Received message from Master: op=Shutter serial=108513 14:12:58 Shutter LASER close 14:12:58 Received message from Camera: op=State serial=108515 14:12:58 GetSingleValue result=40 Value=cccccccc 14:12:58 SkyScan query 14:12:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:12:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:59 Parameters OK 14:12:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:59 Set A/D data flow result=40 14:12:59 Set A/D channel type result=40 14:12:59 Set A/D encoding result=40 14:12:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:59 Set channel filter=0.000000e+000 result=40 14:12:59 Config A/D Result=40 14:12:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:59 Get A/D filter: -9.255963e+061 result=40 14:12:59 Get A/D value=-858993460 result=40 14:12:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:59 Parameters OK 14:12:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:59 Set A/D data flow result=40 14:12:59 Set A/D channel type result=40 14:12:59 Set A/D encoding result=40 14:12:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:59 Set channel filter=0.000000e+000 result=40 14:12:59 Config A/D Result=40 14:12:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:59 Get A/D filter: -9.255963e+061 result=40 14:12:59 Get A/D value=-858993460 result=40 14:12:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:12:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:12:59 Aux= 14:12:59 Message to Camera, serial 108515 queued 14:13:35 Received message from Master: op=PointingHead serial=108528 14:13:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:13:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:13:36 Point started: ret=0 14:13:36 point_skyscan result=0 14:13:36 Check angles 14:13:36 SkyScan query 14:13:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:13:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:13:37 Message to Master queued w/err=0: serial=108528 error=0 14:13:42 Received message from Master: op=Filter serial=108529 14:13:42 Color wheel filter change from 0 to 0 14:13:42 FLIGetFilterPos err=0 currentPosition=0 14:13:42 FLIGetStepsRemaining err=0 RemainingSteps=0 14:13:42 Filter is already there-color wheel unchanged 14:13:42 Received message from Master: op=Shutter serial=108530 14:13:42 Shutter LASER close 14:13:42 Received message from Camera: op=State serial=108532 14:13:42 GetSingleValue result=40 Value=cccccccc 14:13:42 SkyScan query 14:13:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:13:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:43 Parameters OK 14:13:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:43 Set A/D data flow result=40 14:13:43 Set A/D channel type result=40 14:13:43 Set A/D encoding result=40 14:13:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:43 Set channel filter=0.000000e+000 result=40 14:13:43 Config A/D Result=40 14:13:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:43 Get A/D filter: -9.255963e+061 result=40 14:13:43 Get A/D value=-858993460 result=40 14:13:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:43 Parameters OK 14:13:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:43 Set A/D data flow result=40 14:13:43 Set A/D channel type result=40 14:13:43 Set A/D encoding result=40 14:13:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:43 Set channel filter=0.000000e+000 result=40 14:13:43 Config A/D Result=40 14:13:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:43 Get A/D filter: -9.255963e+061 result=40 14:13:43 Get A/D value=-858993460 result=40 14:13:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:13:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:13:43 Aux= 14:13:43 Message to Camera, serial 108532 queued 14:14:20 Received message from Master: op=PointingHead serial=108545 14:14:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:14:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:14:20 Point started: ret=0 14:14:20 point_skyscan result=0 14:14:21 Check angles 14:14:21 SkyScan query 14:14:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 14:14:21 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 14:14:22 Check angles 14:14:22 SkyScan query 14:14:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 [UTC 2019-3-4 14:14:22] 14:14:22 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 14:14:22 Check angles 14:14:22 SkyScan query 14:14:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 14:14:23 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 14:14:23 Check angles 14:14:23 SkyScan query 14:14:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.295<-17753 Statuses=0008 0009 14:14:24 Msec=2250 True Az=112.995 Ze=-86.295 Az status=0008 Ze status=0009 14:14:24 Check angles 14:14:24 SkyScan query 14:14:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.235<-19149 Statuses=0008 0009 14:14:24 Msec=3000 True Az=112.995 Ze=-107.235 Az status=0008 Ze status=0009 14:14:25 Check angles 14:14:25 SkyScan query 14:14:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.205<-20547 Statuses=0008 0009 14:14:25 Msec=3750 True Az=112.995 Ze=-128.205 Az status=0008 Ze status=0009 14:14:25 Check angles 14:14:25 SkyScan query 14:14:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.655<-21977 Statuses=0008 0009 14:14:26 Msec=4500 True Az=112.995 Ze=-149.655 Az status=0008 Ze status=0009 14:14:26 Check angles 14:14:26 SkyScan query 14:14:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.91<-23394 Statuses=0008 0009 14:14:27 Msec=5250 True Az=112.995 Ze=-170.91 Az status=0008 Ze status=0009 14:14:27 Check angles 14:14:27 SkyScan query 14:14:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:14:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:14:27 Message to Master queued w/err=0: serial=108545 error=0 14:14:32 Received message from Master: op=Filter serial=108546 14:14:32 Color wheel filter change from 0 to 0 14:14:32 FLIGetFilterPos err=0 currentPosition=0 14:14:32 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:32 Filter is already there-color wheel unchanged 14:14:33 Received message from Master: op=Shutter serial=108547 14:14:33 Shutter LASER open 14:14:33 Received message from Camera: op=State serial=108549 14:14:33 GetSingleValue result=40 Value=cccccccc 14:14:33 SkyScan query 14:14:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:14:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:33 Parameters OK 14:14:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:33 Set A/D data flow result=40 14:14:33 Set A/D channel type result=40 14:14:33 Set A/D encoding result=40 14:14:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:33 Set channel filter=0.000000e+000 result=40 14:14:33 Config A/D Result=40 14:14:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:33 Get A/D filter: -9.255963e+061 result=40 14:14:33 Get A/D value=-858993460 result=40 14:14:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:33 Parameters OK 14:14:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:33 Set A/D data flow result=40 14:14:33 Set A/D channel type result=40 14:14:33 Set A/D encoding result=40 14:14:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:33 Set channel filter=0.000000e+000 result=40 14:14:33 Config A/D Result=40 14:14:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:33 Get A/D filter: -9.255963e+061 result=40 14:14:33 Get A/D value=-858993460 result=40 14:14:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:33 Aux= 14:14:33 Message to Camera, serial 108549 queued 14:14:41 Received message from Master: op=Shutter serial=108558 14:14:41 Shutter LASER close 14:14:41 Received message from Master: op=PointingHead serial=108562 14:14:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:14:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:14:42 Point started: ret=0 14:14:42 point_skyscan result=0 14:14:43 Check angles 14:14:43 SkyScan query 14:14:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 14:14:43 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 14:14:43 Check angles 14:14:43 SkyScan query 14:14:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.07<-20138 Statuses=0008 0009 14:14:44 Msec=750 True Az=112.995 Ze=-122.07 Az status=0008 Ze status=0009 14:14:44 Check angles 14:14:44 SkyScan query 14:14:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.16<-18744 Statuses=0008 0009 14:14:45 Msec=1500 True Az=112.995 Ze=-101.16 Az status=0008 Ze status=0009 14:14:45 Check angles 14:14:45 SkyScan query 14:14:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.175<-17345 Statuses=0008 0009 14:14:45 Msec=2250 True Az=112.995 Ze=-80.175 Az status=0008 Ze status=0009 14:14:46 Check angles 14:14:46 SkyScan query 14:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.755<-15917 Statuses=0008 0009 14:14:46 Msec=3000 True Az=112.995 Ze=-58.755 Az status=0008 Ze status=0009 14:14:46 Check angles 14:14:46 SkyScan query 14:14:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.77<-14518 Statuses=0008 0009 14:14:47 Msec=3750 True Az=112.995 Ze=-37.77 Az status=0008 Ze status=0009 14:14:47 Check angles 14:14:47 SkyScan query 14:14:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.83<-13122 Statuses=0008 0009 14:14:48 Msec=4500 True Az=112.995 Ze=-16.83 Az status=0008 Ze status=0009 14:14:48 Check angles 14:14:48 SkyScan query 14:14:48 SkyScan query done: ret=0 az=112.995<-7533 ze=4.41<-11706 Statuses=0008 0009 14:14:48 Msec=5250 True Az=112.995 Ze=4.41 Az status=0008 Ze status=0009 14:14:49 Check angles 14:14:49 SkyScan query 14:14:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:14:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:14:49 Message to Master queued w/err=0: serial=108562 error=0 14:14:54 Received message from Master: op=Filter serial=108563 14:14:54 Color wheel filter change from 0 to 0 14:14:54 FLIGetFilterPos err=0 currentPosition=0 14:14:54 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:54 Filter is already there-color wheel unchanged 14:14:54 Received message from Master: op=Shutter serial=108564 14:14:54 Shutter LASER close 14:14:54 Received message from Camera: op=State serial=108566 14:14:54 GetSingleValue result=40 Value=cccccccc 14:14:54 SkyScan query 14:14:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:14:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:55 Parameters OK 14:14:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:55 Set A/D data flow result=40 14:14:55 Set A/D channel type result=40 14:14:55 Set A/D encoding result=40 14:14:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:55 Set channel filter=0.000000e+000 result=40 14:14:55 Config A/D Result=40 14:14:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:55 Get A/D filter: -9.255963e+061 result=40 14:14:55 Get A/D value=-858993460 result=40 14:14:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:55 Parameters OK 14:14:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:55 Set A/D data flow result=40 14:14:55 Set A/D channel type result=40 14:14:55 Set A/D encoding result=40 14:14:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:55 Set channel filter=0.000000e+000 result=40 14:14:55 Config A/D Result=40 14:14:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:55 Get A/D filter: -9.255963e+061 result=40 14:14:55 Get A/D value=-858993460 result=40 14:14:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:55 Aux= 14:14:55 Message to Camera, serial 108566 queued 14:15:32 Received message from Master: op=PointingHead serial=108579 14:15:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:15:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:15:32 Point started: ret=0 14:15:32 point_skyscan result=0 14:15:33 Check angles 14:15:33 SkyScan query 14:15:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:15:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:15:34 Message to Master queued w/err=0: serial=108579 error=0 14:15:39 Received message from Master: op=Filter serial=108580 14:15:39 Color wheel filter change from 0 to 0 14:15:39 FLIGetFilterPos err=0 currentPosition=0 14:15:39 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:39 Filter is already there-color wheel unchanged 14:15:39 Received message from Master: op=Shutter serial=108581 14:15:39 Shutter LASER close 14:15:39 Received message from Camera: op=State serial=108583 14:15:39 GetSingleValue result=40 Value=cccccccc 14:15:39 SkyScan query 14:15:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:15:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:39 Parameters OK 14:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:39 Set A/D data flow result=40 14:15:39 Set A/D channel type result=40 14:15:39 Set A/D encoding result=40 14:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:39 Set channel filter=0.000000e+000 result=40 14:15:39 Config A/D Result=40 14:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:39 Get A/D filter: -9.255963e+061 result=40 14:15:39 Get A/D value=-858993460 result=40 14:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:39 Parameters OK 14:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:39 Set A/D data flow result=40 14:15:39 Set A/D channel type result=40 14:15:39 Set A/D encoding result=40 14:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:39 Set channel filter=0.000000e+000 result=40 14:15:39 Config A/D Result=40 14:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:39 Get A/D filter: -9.255963e+061 result=40 14:15:39 Get A/D value=-858993460 result=40 14:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:15:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:15:39 Aux= 14:15:39 Message to Camera, serial 108583 queued 14:16:16 Received message from Master: op=PointingHead serial=108596 14:16:16 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:16:16 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:16:17 Point started: ret=0 14:16:17 point_skyscan result=0 14:16:17 Check angles 14:16:17 SkyScan query 14:16:18 SkyScan query done: ret=0 az=136.14<-9076 ze=-6.51<-12434 Statuses=0009 0008 14:16:18 Msec=0 True Az=136.14 Ze=-6.51 Az status=0009 Ze status=0008 14:16:18 Check angles 14:16:18 SkyScan query 14:16:19 SkyScan query done: ret=0 az=153.51<-10234 ze=-6.51<-12434 Statuses=0009 0008 14:16:19 Msec=750 True Az=153.51 Ze=-6.51 Az status=0009 Ze status=0008 14:16:19 Check angles 14:16:19 SkyScan query 14:16:19 SkyScan query done: ret=0 az=171.375<-11425 ze=-6.495<-12433 Statuses=0009 0008 14:16:19 Msec=1500 True Az=171.375 Ze=-6.495 Az status=0009 Ze status=0008 14:16:20 Check angles 14:16:20 SkyScan query 14:16:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:16:20 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:16:20 Message to Master queued w/err=0: serial=108596 error=0 14:16:25 Received message from Master: op=Filter serial=108597 14:16:25 Color wheel filter change from 0 to 0 14:16:25 FLIGetFilterPos err=0 currentPosition=0 14:16:25 FLIGetStepsRemaining err=0 RemainingSteps=0 14:16:25 Filter is already there-color wheel unchanged 14:16:25 Received message from Master: op=Shutter serial=108598 14:16:25 Shutter LASER close 14:16:25 Received message from Camera: op=State serial=108600 14:16:25 GetSingleValue result=40 Value=cccccccc 14:16:25 SkyScan query 14:16:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:16:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:26 Parameters OK 14:16:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:26 Set A/D data flow result=40 14:16:26 Set A/D channel type result=40 14:16:26 Set A/D encoding result=40 14:16:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:26 Set channel filter=0.000000e+000 result=40 14:16:26 Config A/D Result=40 14:16:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:26 Get A/D filter: -9.255963e+061 result=40 14:16:26 Get A/D value=-858993460 result=40 14:16:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:26 Parameters OK 14:16:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:26 Set A/D data flow result=40 14:16:26 Set A/D channel type result=40 14:16:26 Set A/D encoding result=40 14:16:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:26 Set channel filter=0.000000e+000 result=40 14:16:26 Config A/D Result=40 14:16:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:26 Get A/D filter: -9.255963e+061 result=40 14:16:26 Get A/D value=-858993460 result=40 14:16:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:16:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:16:26 Aux= 14:16:26 Message to Camera, serial 108600 queued 14:17:03 Received message from Master: op=PointingHead serial=108613 14:17:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:17:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:17:03 Point started: ret=0 14:17:03 point_skyscan result=0 14:17:04 Check angles 14:17:04 SkyScan query 14:17:04 SkyScan query done: ret=0 az=153.075<-10205 ze=6.51<-11566 Statuses=0009 0008 14:17:04 Msec=0 True Az=153.075 Ze=6.51 Az status=0009 Ze status=0008 14:17:05 Check angles 14:17:05 SkyScan query 14:17:05 SkyScan query done: ret=0 az=135.66<-9044 ze=6.495<-11567 Statuses=0009 0008 14:17:05 Msec=750 True Az=135.66 Ze=6.495 Az status=0009 Ze status=0008 14:17:05 Check angles 14:17:05 SkyScan query 14:17:06 SkyScan query done: ret=0 az=118.155<-7877 ze=6.495<-11567 Statuses=0009 0008 14:17:06 Msec=1500 True Az=118.155 Ze=6.495 Az status=0009 Ze status=0008 14:17:06 Check angles 14:17:06 SkyScan query 14:17:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:17:07 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:17:07 Message to Master queued w/err=0: serial=108613 error=0 14:17:12 Received message from Master: op=Filter serial=108614 14:17:12 Color wheel filter change from 0 to 0 14:17:12 FLIGetFilterPos err=0 currentPosition=0 14:17:12 FLIGetStepsRemaining err=0 RemainingSteps=0 14:17:12 Filter is already there-color wheel unchanged 14:17:12 Received message from Master: op=Shutter serial=108615 14:17:12 Shutter LASER close 14:17:12 Received message from Camera: op=State serial=108617 14:17:12 GetSingleValue result=40 Value=cccccccc 14:17:12 SkyScan query 14:17:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:17:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:12 Parameters OK 14:17:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:12 Set A/D data flow result=40 14:17:12 Set A/D channel type result=40 14:17:12 Set A/D encoding result=40 14:17:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:12 Set channel filter=0.000000e+000 result=40 14:17:12 Config A/D Result=40 14:17:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:12 Get A/D filter: -9.255963e+061 result=40 14:17:12 Get A/D value=-858993460 result=40 14:17:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:12 Parameters OK 14:17:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:12 Set A/D data flow result=40 14:17:12 Set A/D channel type result=40 14:17:12 Set A/D encoding result=40 14:17:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:12 Set channel filter=0.000000e+000 result=40 14:17:12 Config A/D Result=40 14:17:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:12 Get A/D filter: -9.255963e+061 result=40 14:17:12 Get A/D value=-858993460 result=40 14:17:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:17:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:17:12 Aux= 14:17:12 Message to Camera, serial 108617 queued 14:17:49 Received message from Master: op=PointingHead serial=108630 14:17:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:17:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:17:50 Point started: ret=0 14:17:50 point_skyscan result=0 14:17:50 Check angles 14:17:50 SkyScan query 14:17:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 14:17:51 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 14:17:51 Check angles 14:17:51 SkyScan query 14:17:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 14:17:52 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 14:17:52 Check angles 14:17:52 SkyScan query 14:17:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.19<-16346 Statuses=0008 0009 14:17:52 Msec=1500 True Az=112.995 Ze=-65.19 Az status=0008 Ze status=0009 14:17:53 Check angles 14:17:53 SkyScan query 14:17:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.13<-17742 Statuses=0008 0009 14:17:53 Msec=2250 True Az=112.995 Ze=-86.13 Az status=0008 Ze status=0009 14:17:53 Check angles 14:17:53 SkyScan query 14:17:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.085<-19139 Statuses=0008 0009 14:17:54 Msec=3000 True Az=112.995 Ze=-107.085 Az status=0008 Ze status=0009 14:17:54 Check angles 14:17:54 SkyScan query 14:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.07<-20538 Statuses=0008 0009 14:17:55 Msec=3750 True Az=112.995 Ze=-128.07 Az status=0008 Ze status=0009 14:17:55 Check angles 14:17:55 SkyScan query 14:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.04<-21936 Statuses=0008 0009 14:17:55 Msec=4500 True Az=112.995 Ze=-149.04 Az status=0008 Ze status=0009 14:17:56 Check angles 14:17:56 SkyScan query 14:17:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.965<-23331 Statuses=0008 0009 14:17:56 Msec=5250 True Az=112.995 Ze=-169.965 Az status=0008 Ze status=0009 14:17:56 Check angles 14:17:56 SkyScan query 14:17:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:17:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:17:57 Message to Master queued w/err=0: serial=108630 error=0 14:18:02 Received message from Master: op=Filter serial=108631 14:18:02 Color wheel filter change from 0 to 0 14:18:02 FLIGetFilterPos err=0 currentPosition=0 14:18:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:18:02 Filter is already there-color wheel unchanged 14:18:02 Received message from Master: op=Shutter serial=108632 14:18:02 Shutter LASER open 14:18:02 Received message from Camera: op=State serial=108634 14:18:02 GetSingleValue result=40 Value=cccccccc 14:18:02 SkyScan query 14:18:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:18:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:03 Parameters OK 14:18:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:03 Set A/D data flow result=40 14:18:03 Set A/D channel type result=40 14:18:03 Set A/D encoding result=40 14:18:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:03 Set channel filter=0.000000e+000 result=40 14:18:03 Config A/D Result=40 14:18:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:03 Get A/D filter: -9.255963e+061 result=40 14:18:03 Get A/D value=-858993460 result=40 14:18:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:03 Parameters OK 14:18:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:03 Set A/D data flow result=40 14:18:03 Set A/D channel type result=40 14:18:03 Set A/D encoding result=40 14:18:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:03 Set channel filter=0.000000e+000 result=40 14:18:03 Config A/D Result=40 14:18:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:03 Get A/D filter: -9.255963e+061 result=40 14:18:03 Get A/D value=-858993460 result=40 14:18:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:18:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:18:03 Aux= 14:18:03 Message to Camera, serial 108634 queued 14:18:11 Received message from Master: op=Shutter serial=108644 14:18:11 Shutter LASER close 14:18:12 Received message from Master: op=PointingHead serial=108648 14:18:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:18:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:18:12 Point started: ret=0 14:18:12 point_skyscan result=0 14:18:13 Check angles 14:18:13 SkyScan query 14:18:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.98<-21532 Statuses=0008 0009 14:18:13 Msec=0 True Az=112.995 Ze=-142.98 Az status=0008 Ze status=0009 14:18:14 Check angles 14:18:14 SkyScan query 14:18:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 14:18:14 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 14:18:14 Check angles 14:18:14 SkyScan query 14:18:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 14:18:15 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 14:18:15 Check angles 14:18:15 SkyScan query 14:18:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 14:18:16 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 14:18:16 Check angles 14:18:16 SkyScan query 14:18:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 14:18:16 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 14:18:17 Check angles 14:18:17 SkyScan query 14:18:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.115<-14541 Statuses=0008 0009 14:18:17 Msec=3750 True Az=112.995 Ze=-38.115 Az status=0008 Ze status=0009 14:18:17 Check angles 14:18:17 SkyScan query 14:18:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.19<-13146 Statuses=0008 0009 14:18:18 Msec=4500 True Az=112.995 Ze=-17.19 Az status=0008 Ze status=0009 14:18:18 Check angles 14:18:18 SkyScan query 14:18:19 SkyScan query done: ret=0 az=112.995<-7533 ze=3.795<-11747 Statuses=0008 0009 14:18:19 Msec=5250 True Az=112.995 Ze=3.795 Az status=0008 Ze status=0009 14:18:19 Check angles 14:18:19 SkyScan query 14:18:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:18:19 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:18:19 Message to Master queued w/err=0: serial=108648 error=0 14:18:24 Received message from Master: op=Filter serial=108649 14:18:24 Color wheel filter change from 0 to 0 14:18:24 FLIGetFilterPos err=0 currentPosition=0 14:18:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:18:24 Filter is already there-color wheel unchanged 14:18:25 Received message from Master: op=Shutter serial=108650 14:18:25 Shutter LASER close 14:18:25 Received message from Camera: op=State serial=108652 14:18:25 GetSingleValue result=40 Value=cccccccc 14:18:25 SkyScan query 14:18:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:18:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:25 Parameters OK 14:18:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:25 Set A/D data flow result=40 14:18:25 Set A/D channel type result=40 14:18:25 Set A/D encoding result=40 14:18:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:25 Set channel filter=0.000000e+000 result=40 14:18:25 Config A/D Result=40 14:18:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:25 Get A/D filter: -9.255963e+061 result=40 14:18:25 Get A/D value=-858993460 result=40 14:18:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:25 Parameters OK 14:18:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:25 Set A/D data flow result=40 14:18:25 Set A/D channel type result=40 14:18:25 Set A/D encoding result=40 14:18:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:25 Set channel filter=0.000000e+000 result=40 14:18:25 Config A/D Result=40 14:18:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:25 Get A/D filter: -9.255963e+061 result=40 14:18:25 Get A/D value=-858993460 result=40 14:18:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:18:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:18:25 Aux= 14:18:25 Message to Camera, serial 108652 queued 14:19:02 Received message from Master: op=PointingHead serial=108665 14:19:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:19:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:19:03 Point started: ret=0 14:19:03 point_skyscan result=0 14:19:03 Check angles 14:19:03 SkyScan query 14:19:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:19:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:19:04 Message to Master queued w/err=0: serial=108665 error=0 14:19:09 Received message from Master: op=Filter serial=108666 14:19:09 Color wheel filter change from 0 to 0 14:19:09 FLIGetFilterPos err=0 currentPosition=0 14:19:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:19:09 Filter is already there-color wheel unchanged 14:19:09 Received message from Master: op=Shutter serial=108667 14:19:09 Shutter LASER close 14:19:09 Received message from Camera: op=State serial=108669 14:19:09 GetSingleValue result=40 Value=cccccccc 14:19:09 SkyScan query 14:19:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:19:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:10 Parameters OK 14:19:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:10 Set A/D data flow result=40 14:19:10 Set A/D channel type result=40 14:19:10 Set A/D encoding result=40 14:19:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:10 Set channel filter=0.000000e+000 result=40 14:19:10 Config A/D Result=40 14:19:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:10 Get A/D filter: -9.255963e+061 result=40 14:19:10 Get A/D value=-858993460 result=40 14:19:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:10 Parameters OK 14:19:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:10 Set A/D data flow result=40 14:19:10 Set A/D channel type result=40 14:19:10 Set A/D encoding result=40 14:19:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:10 Set channel filter=0.000000e+000 result=40 14:19:10 Config A/D Result=40 14:19:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:10 Get A/D filter: -9.255963e+061 result=40 14:19:10 Get A/D value=-858993460 result=40 14:19:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:19:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:19:10 Aux= 14:19:10 Message to Camera, serial 108669 queued 14:19:47 Received message from Master: op=PointingHead serial=108682 14:19:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:19:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:19:47 Point started: ret=0 14:19:47 point_skyscan result=0 14:19:48 Check angles 14:19:48 SkyScan query 14:19:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:19:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:19:48 Message to Master queued w/err=0: serial=108682 error=0 14:19:53 Received message from Master: op=Filter serial=108683 14:19:53 Color wheel filter change from 0 to 0 14:19:53 FLIGetFilterPos err=0 currentPosition=0 14:19:53 FLIGetStepsRemaining err=0 RemainingSteps=0 14:19:53 Filter is already there-color wheel unchanged 14:19:53 Received message from Master: op=Shutter serial=108684 14:19:53 Shutter LASER close 14:19:53 Received message from Camera: op=State serial=108686 14:19:53 GetSingleValue result=40 Value=cccccccc 14:19:53 SkyScan query 14:19:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:19:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:54 Parameters OK 14:19:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:54 Set A/D data flow result=40 14:19:54 Set A/D channel type result=40 14:19:54 Set A/D encoding result=40 14:19:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:54 Set channel filter=0.000000e+000 result=40 14:19:54 Config A/D Result=40 14:19:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:54 Get A/D filter: -9.255963e+061 result=40 14:19:54 Get A/D value=-858993460 result=40 14:19:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:54 Parameters OK 14:19:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:54 Set A/D data flow result=40 14:19:54 Set A/D channel type result=40 14:19:54 Set A/D encoding result=40 14:19:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:54 Set channel filter=0.000000e+000 result=40 14:19:54 Config A/D Result=40 14:19:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:54 Get A/D filter: -9.255963e+061 result=40 14:19:54 Get A/D value=-858993460 result=40 14:19:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:19:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:19:54 Aux= 14:19:54 Message to Camera, serial 108686 queued 14:20:31 Received message from Master: op=PointingHead serial=108699 14:20:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:20:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:20:31 Point started: ret=0 14:20:31 point_skyscan result=0 14:20:32 Check angles 14:20:32 SkyScan query 14:20:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:20:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:20:33 Message to Master queued w/err=0: serial=108699 error=0 14:20:38 Received message from Master: op=Filter serial=108700 14:20:38 Color wheel filter change from 0 to 0 14:20:38 FLIGetFilterPos err=0 currentPosition=0 14:20:38 FLIGetStepsRemaining err=0 RemainingSteps=0 14:20:38 Filter is already there-color wheel unchanged 14:20:38 Received message from Master: op=Shutter serial=108701 14:20:38 Shutter LASER close 14:20:38 Received message from Camera: op=State serial=108703 14:20:38 GetSingleValue result=40 Value=cccccccc 14:20:38 SkyScan query 14:20:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:20:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:38 Parameters OK 14:20:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:38 Set A/D data flow result=40 14:20:38 Set A/D channel type result=40 14:20:38 Set A/D encoding result=40 14:20:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:38 Set channel filter=0.000000e+000 result=40 14:20:38 Config A/D Result=40 14:20:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:38 Get A/D filter: -9.255963e+061 result=40 14:20:38 Get A/D value=-858993460 result=40 14:20:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:38 Parameters OK 14:20:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:38 Set A/D data flow result=40 14:20:38 Set A/D channel type result=40 14:20:38 Set A/D encoding result=40 14:20:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:38 Set channel filter=0.000000e+000 result=40 14:20:38 Config A/D Result=40 14:20:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:38 Get A/D filter: -9.255963e+061 result=40 14:20:38 Get A/D value=-858993460 result=40 14:20:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:20:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:20:38 Aux= 14:20:38 Message to Camera, serial 108703 queued 14:21:15 Received message from Master: op=PointingHead serial=108716 14:21:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:21:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:21:16 Point started: ret=0 14:21:16 point_skyscan result=0 14:21:16 Check angles 14:21:16 SkyScan query 14:21:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.445<-13563 Statuses=0008 0009 14:21:17 Msec=0 True Az=112.995 Ze=-23.445 Az status=0008 Ze status=0009 14:21:17 Check angles 14:21:17 SkyScan query 14:21:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.805<-14987 Statuses=0008 0009 14:21:18 Msec=750 True Az=112.995 Ze=-44.805 Az status=0008 Ze status=0009 14:21:18 Check angles 14:21:18 SkyScan query 14:21:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.775<-16385 Statuses=0008 0009 14:21:18 Msec=1500 True Az=112.995 Ze=-65.775 Az status=0008 Ze status=0009 14:21:19 Check angles 14:21:19 SkyScan query 14:21:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.745<-17783 Statuses=0008 0009 14:21:19 Msec=2250 True Az=112.995 Ze=-86.745 Az status=0008 Ze status=0009 14:21:19 Check angles 14:21:19 SkyScan query 14:21:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.18<-19212 Statuses=0008 0009 14:21:20 Msec=3000 True Az=112.995 Ze=-108.18 Az status=0008 Ze status=0009 14:21:20 Check angles 14:21:20 SkyScan query 14:21:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.105<-20607 Statuses=0008 0009 14:21:21 Msec=3750 True Az=112.995 Ze=-129.105 Az status=0008 Ze status=0009 14:21:21 Check angles 14:21:21 SkyScan query 14:21:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.06<-22004 Statuses=0008 0009 14:21:21 Msec=4500 True Az=112.995 Ze=-150.06 Az status=0008 Ze status=0009 14:21:22 Check angles 14:21:22 SkyScan query 14:21:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.21<-23414 Statuses=0008 0009 14:21:22 Msec=5250 True Az=112.995 Ze=-171.21 Az status=0008 Ze status=0009 14:21:22 Check angles 14:21:22 SkyScan query 14:21:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:21:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:21:23 Message to Master queued w/err=0: serial=108716 error=0 14:21:28 Received message from Master: op=Filter serial=108717 14:21:28 Color wheel filter change from 0 to 0 14:21:28 FLIGetFilterPos err=0 currentPosition=0 14:21:28 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:28 Filter is already there-color wheel unchanged 14:21:28 Received message from Master: op=Shutter serial=108718 14:21:28 Shutter LASER open 14:21:28 Received message from Camera: op=State serial=108720 14:21:28 GetSingleValue result=40 Value=cccccccc 14:21:28 SkyScan query 14:21:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:21:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:29 Parameters OK 14:21:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:29 Set A/D data flow result=40 14:21:29 Set A/D channel type result=40 14:21:29 Set A/D encoding result=40 14:21:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:29 Set channel filter=0.000000e+000 result=40 14:21:29 Config A/D Result=40 14:21:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:29 Get A/D filter: -9.255963e+061 result=40 14:21:29 Get A/D value=-858993460 result=40 14:21:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:29 Parameters OK 14:21:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:29 Set A/D data flow result=40 14:21:29 Set A/D channel type result=40 14:21:29 Set A/D encoding result=40 14:21:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:29 Set channel filter=0.000000e+000 result=40 14:21:29 Config A/D Result=40 14:21:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:29 Get A/D filter: -9.255963e+061 result=40 14:21:29 Get A/D value=-858993460 result=40 14:21:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:29 Aux= 14:21:29 Message to Camera, serial 108720 queued 14:21:37 Received message from Master: op=Shutter serial=108730 14:21:37 Shutter LASER close 14:21:38 Received message from Master: op=PointingHead serial=108734 14:21:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:21:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:21:38 Point started: ret=0 14:21:38 point_skyscan result=0 14:21:39 Check angles 14:21:39 SkyScan query 14:21:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 14:21:40 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 14:21:40 Check angles 14:21:40 SkyScan query 14:21:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.58<-20172 Statuses=0008 0009 14:21:40 Msec=750 True Az=112.995 Ze=-122.58 Az status=0008 Ze status=0009 14:21:41 Check angles 14:21:41 SkyScan query 14:21:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.625<-18775 Statuses=0008 0009 14:21:41 Msec=1500 True Az=112.995 Ze=-101.625 Az status=0008 Ze status=0009 14:21:41 Check angles 14:21:41 SkyScan query 14:21:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 14:21:42 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 14:21:42 Check angles 14:21:42 SkyScan query 14:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.28<-15952 Statuses=0008 0009 14:21:43 Msec=3000 True Az=112.995 Ze=-59.28 Az status=0008 Ze status=0009 14:21:43 Check angles 14:21:43 SkyScan query 14:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.8<-14520 Statuses=0008 0009 14:21:43 Msec=3750 True Az=112.995 Ze=-37.8 Az status=0008 Ze status=0009 14:21:44 Check angles 14:21:44 SkyScan query 14:21:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.86<-13124 Statuses=0008 0009 14:21:44 Msec=4500 True Az=112.995 Ze=-16.86 Az status=0008 Ze status=0009 14:21:44 Check angles 14:21:44 SkyScan query 14:21:45 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 14:21:45 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 14:21:45 Check angles 14:21:45 SkyScan query 14:21:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:21:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:21:46 Message to Master queued w/err=0: serial=108734 error=0 14:21:51 Received message from Master: op=Filter serial=108735 14:21:51 Color wheel filter change from 0 to 0 14:21:51 FLIGetFilterPos err=0 currentPosition=0 14:21:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:51 Filter is already there-color wheel unchanged 14:21:51 Received message from Master: op=Shutter serial=108736 14:21:51 Shutter LASER close 14:21:51 Received message from Camera: op=State serial=108738 14:21:51 GetSingleValue result=40 Value=cccccccc 14:21:51 SkyScan query 14:21:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:21:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:52 Parameters OK 14:21:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:52 Set A/D data flow result=40 14:21:52 Set A/D channel type result=40 14:21:52 Set A/D encoding result=40 14:21:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:52 Set channel filter=0.000000e+000 result=40 14:21:52 Config A/D Result=40 14:21:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:52 Get A/D filter: -9.255963e+061 result=40 14:21:52 Get A/D value=-858993460 result=40 14:21:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:52 Parameters OK 14:21:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:52 Set A/D data flow result=40 14:21:52 Set A/D channel type result=40 14:21:52 Set A/D encoding result=40 14:21:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:52 Set channel filter=0.000000e+000 result=40 14:21:52 Config A/D Result=40 14:21:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:52 Get A/D filter: -9.255963e+061 result=40 14:21:52 Get A/D value=-858993460 result=40 14:21:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:52 Aux= 14:21:52 Message to Camera, serial 108738 queued 14:22:28 Received message from Master: op=PointingHead serial=108751 14:22:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:22:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:22:29 Point started: ret=0 14:22:29 point_skyscan result=0 14:22:29 Check angles 14:22:29 SkyScan query 14:22:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:22:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:22:30 Message to Master queued w/err=0: serial=108751 error=0 14:22:35 Received message from Master: op=Filter serial=108752 14:22:35 Color wheel filter change from 0 to 0 14:22:35 FLIGetFilterPos err=0 currentPosition=0 14:22:35 FLIGetStepsRemaining err=0 RemainingSteps=0 14:22:35 Filter is already there-color wheel unchanged 14:22:35 Received message from Master: op=Shutter serial=108753 14:22:35 Shutter LASER close 14:22:35 Received message from Camera: op=State serial=108755 14:22:35 GetSingleValue result=40 Value=cccccccc 14:22:35 SkyScan query 14:22:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:22:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:36 Parameters OK 14:22:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:36 Set A/D data flow result=40 14:22:36 Set A/D channel type result=40 14:22:36 Set A/D encoding result=40 14:22:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:36 Set channel filter=0.000000e+000 result=40 14:22:36 Config A/D Result=40 14:22:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:36 Get A/D filter: -9.255963e+061 result=40 14:22:36 Get A/D value=-858993460 result=40 14:22:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:36 Parameters OK 14:22:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:36 Set A/D data flow result=40 14:22:36 Set A/D channel type result=40 14:22:36 Set A/D encoding result=40 14:22:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:36 Set channel filter=0.000000e+000 result=40 14:22:36 Config A/D Result=40 14:22:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:36 Get A/D filter: -9.255963e+061 result=40 14:22:36 Get A/D value=-858993460 result=40 14:22:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:22:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:22:36 Aux= 14:22:36 Message to Camera, serial 108755 queued 14:23:13 Received message from Master: op=PointingHead serial=108768 14:23:13 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:23:13 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:23:13 Point started: ret=0 14:23:13 point_skyscan result=0 14:23:14 Check angles 14:23:14 SkyScan query 14:23:14 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 14:23:14 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 14:23:15 Check angles 14:23:15 SkyScan query 14:23:15 SkyScan query done: ret=0 az=153.57<-10238 ze=-6.495<-12433 Statuses=0009 0008 14:23:15 Msec=750 True Az=153.57 Ze=-6.495 Az status=0009 Ze status=0008 14:23:15 Check angles 14:23:15 SkyScan query 14:23:16 SkyScan query done: ret=0 az=171.435<-11429 ze=-6.495<-12433 Statuses=0009 0008 14:23:16 Msec=1500 True Az=171.435 Ze=-6.495 Az status=0009 Ze status=0008 14:23:16 Check angles 14:23:16 SkyScan query 14:23:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:23:17 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:23:17 Message to Master queued w/err=0: serial=108768 error=0 14:23:22 Received message from Master: op=Filter serial=108769 14:23:22 Color wheel filter change from 0 to 0 14:23:22 FLIGetFilterPos err=0 currentPosition=0 14:23:22 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:22 Filter is already there-color wheel unchanged 14:23:22 Received message from Master: op=Shutter serial=108770 14:23:22 Shutter LASER close 14:23:22 Received message from Camera: op=State serial=108772 14:23:22 GetSingleValue result=40 Value=cccccccc 14:23:22 SkyScan query 14:23:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:23:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:22 Parameters OK 14:23:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:22 Set A/D data flow result=40 14:23:22 Set A/D channel type result=40 14:23:22 Set A/D encoding result=40 14:23:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:22 Set channel filter=0.000000e+000 result=40 14:23:22 Config A/D Result=40 14:23:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:22 Get A/D filter: -9.255963e+061 result=40 14:23:22 Get A/D value=-858993460 result=40 14:23:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:22 Parameters OK 14:23:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:22 Set A/D data flow result=40 14:23:22 Set A/D channel type result=40 14:23:22 Set A/D encoding result=40 14:23:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:22 Set channel filter=0.000000e+000 result=40 14:23:22 Config A/D Result=40 14:23:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:22 Get A/D filter: -9.255963e+061 result=40 14:23:22 Get A/D value=-858993460 result=40 14:23:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:23:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:23:22 Aux= 14:23:22 Message to Camera, serial 108772 queued [UTC 2019-3-4 14:23:50] 14:23:59 Received message from Master: op=PointingHead serial=108784 14:23:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:23:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:23:59 Point started: ret=0 14:23:59 point_skyscan result=0 14:24:00 Check angles 14:24:00 SkyScan query 14:24:00 SkyScan query done: ret=0 az=152.565<-10171 ze=6.51<-11566 Statuses=0009 0008 14:24:00 Msec=0 True Az=152.565 Ze=6.51 Az status=0009 Ze status=0008 14:24:01 Check angles 14:24:01 SkyScan query 14:24:01 SkyScan query done: ret=0 az=134.67<-8978 ze=6.495<-11567 Statuses=0009 0008 14:24:01 Msec=750 True Az=134.67 Ze=6.495 Az status=0009 Ze status=0008 14:24:01 Check angles 14:24:01 SkyScan query 14:24:02 SkyScan query done: ret=0 az=117.255<-7817 ze=6.495<-11567 Statuses=0009 0008 14:24:02 Msec=1500 True Az=117.255 Ze=6.495 Az status=0009 Ze status=0008 14:24:02 Check angles 14:24:02 SkyScan query 14:24:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:24:03 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:24:03 Message to Master queued w/err=0: serial=108784 error=0 14:24:08 Received message from Master: op=Filter serial=108785 14:24:08 Color wheel filter change from 0 to 0 14:24:08 FLIGetFilterPos err=0 currentPosition=0 14:24:08 FLIGetStepsRemaining err=0 RemainingSteps=0 14:24:08 Filter is already there-color wheel unchanged 14:24:08 Received message from Master: op=Shutter serial=108786 14:24:08 Shutter LASER close 14:24:08 Received message from Camera: op=State serial=108788 14:24:08 GetSingleValue result=40 Value=cccccccc 14:24:08 SkyScan query 14:24:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:24:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:08 Parameters OK 14:24:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:08 Set A/D data flow result=40 14:24:08 Set A/D channel type result=40 14:24:08 Set A/D encoding result=40 14:24:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:08 Set channel filter=0.000000e+000 result=40 14:24:08 Config A/D Result=40 14:24:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:08 Get A/D filter: -9.255963e+061 result=40 14:24:08 Get A/D value=-858993460 result=40 14:24:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:08 Parameters OK 14:24:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:08 Set A/D data flow result=40 14:24:08 Set A/D channel type result=40 14:24:08 Set A/D encoding result=40 14:24:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:08 Set channel filter=0.000000e+000 result=40 14:24:08 Config A/D Result=40 14:24:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:08 Get A/D filter: -9.255963e+061 result=40 14:24:08 Get A/D value=-858993460 result=40 14:24:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:24:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:24:08 Aux= 14:24:08 Message to Camera, serial 108788 queued 14:24:45 Received message from Master: op=PointingHead serial=108801 14:24:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:24:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:24:46 Point started: ret=0 14:24:46 point_skyscan result=0 14:24:46 Check angles 14:24:46 SkyScan query 14:24:47 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.34<-13556 Statuses=0008 0009 14:24:47 Msec=0 True Az=112.98 Ze=-23.34 Az status=0008 Ze status=0009 14:24:47 Check angles 14:24:47 SkyScan query 14:24:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 14:24:48 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 14:24:48 Check angles 14:24:48 SkyScan query 14:24:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.135<-16409 Statuses=0008 0009 14:24:48 Msec=1500 True Az=112.995 Ze=-66.135 Az status=0008 Ze status=0009 14:24:49 Check angles 14:24:49 SkyScan query 14:24:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.12<-17808 Statuses=0008 0009 14:24:49 Msec=2250 True Az=112.995 Ze=-87.12 Az status=0008 Ze status=0009 14:24:49 Check angles 14:24:49 SkyScan query 14:24:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.09<-19206 Statuses=0008 0009 14:24:50 Msec=3000 True Az=112.995 Ze=-108.09 Az status=0008 Ze status=0009 14:24:50 Check angles 14:24:50 SkyScan query 14:24:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-129<-20600 Statuses=0008 0009 14:24:51 Msec=3750 True Az=112.995 Ze=-129 Az status=0008 Ze status=0009 14:24:51 Check angles 14:24:51 SkyScan query 14:24:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.955<-21997 Statuses=0008 0009 14:24:51 Msec=4500 True Az=112.995 Ze=-149.955 Az status=0008 Ze status=0009 14:24:52 Check angles 14:24:52 SkyScan query 14:24:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.82<-23388 Statuses=0008 0009 14:24:52 Msec=5250 True Az=112.995 Ze=-170.82 Az status=0008 Ze status=0009 14:24:52 Check angles 14:24:52 SkyScan query 14:24:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:24:53 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:24:53 Message to Master queued w/err=0: serial=108801 error=0 14:24:58 Received message from Master: op=Filter serial=108802 14:24:58 Color wheel filter change from 0 to 0 14:24:58 FLIGetFilterPos err=0 currentPosition=0 14:24:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:24:58 Filter is already there-color wheel unchanged 14:24:58 Received message from Master: op=Shutter serial=108803 14:24:58 Shutter LASER open 14:24:58 Received message from Camera: op=State serial=108805 14:24:58 GetSingleValue result=40 Value=cccccccc 14:24:58 SkyScan query 14:24:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:24:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:59 Parameters OK 14:24:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:59 Set A/D data flow result=40 14:24:59 Set A/D channel type result=40 14:24:59 Set A/D encoding result=40 14:24:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:59 Set channel filter=0.000000e+000 result=40 14:24:59 Config A/D Result=40 14:24:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:59 Get A/D filter: -9.255963e+061 result=40 14:24:59 Get A/D value=-858993460 result=40 14:24:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:59 Parameters OK 14:24:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:59 Set A/D data flow result=40 14:24:59 Set A/D channel type result=40 14:24:59 Set A/D encoding result=40 14:24:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:59 Set channel filter=0.000000e+000 result=40 14:24:59 Config A/D Result=40 14:24:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:59 Get A/D filter: -9.255963e+061 result=40 14:24:59 Get A/D value=-858993460 result=40 14:24:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:24:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:24:59 Aux= 14:24:59 Message to Camera, serial 108805 queued 14:25:07 Received message from Master: op=Shutter serial=108815 14:25:07 Shutter LASER close 14:25:08 Received message from Master: op=PointingHead serial=108819 14:25:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:25:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:25:08 Point started: ret=0 14:25:08 point_skyscan result=0 14:25:09 Check angles 14:25:09 SkyScan query 14:25:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 14:25:09 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 14:25:10 Check angles 14:25:10 SkyScan query 14:25:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.55<-20170 Statuses=0008 0009 14:25:10 Msec=750 True Az=112.995 Ze=-122.55 Az status=0008 Ze status=0009 14:25:10 Check angles 14:25:10 SkyScan query 14:25:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.595<-18773 Statuses=0008 0009 14:25:11 Msec=1500 True Az=112.995 Ze=-101.595 Az status=0008 Ze status=0009 14:25:11 Check angles 14:25:11 SkyScan query 14:25:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.535<-17369 Statuses=0008 0009 14:25:12 Msec=2250 True Az=112.995 Ze=-80.535 Az status=0008 Ze status=0009 14:25:12 Check angles 14:25:12 SkyScan query 14:25:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.7<-15980 Statuses=0008 0009 14:25:12 Msec=3000 True Az=112.995 Ze=-59.7 Az status=0008 Ze status=0009 14:25:13 Check angles 14:25:13 SkyScan query 14:25:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.745<-14583 Statuses=0008 0009 14:25:13 Msec=3750 True Az=112.995 Ze=-38.745 Az status=0008 Ze status=0009 14:25:13 Check angles 14:25:13 SkyScan query 14:25:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.775<-13185 Statuses=0008 0009 14:25:14 Msec=4500 True Az=112.995 Ze=-17.775 Az status=0008 Ze status=0009 14:25:14 Check angles 14:25:14 SkyScan query 14:25:15 SkyScan query done: ret=0 az=112.98<-7532 ze=3.195<-11787 Statuses=0008 0009 14:25:15 Msec=5250 True Az=112.98 Ze=3.195 Az status=0008 Ze status=0009 14:25:15 Check angles 14:25:15 SkyScan query 14:25:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:25:15 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:25:15 Message to Master queued w/err=0: serial=108819 error=0 14:25:20 Received message from Master: op=Filter serial=108820 14:25:20 Color wheel filter change from 0 to 0 14:25:20 FLIGetFilterPos err=0 currentPosition=0 14:25:20 FLIGetStepsRemaining err=0 RemainingSteps=0 14:25:20 Filter is already there-color wheel unchanged 14:25:21 Received message from Master: op=Shutter serial=108821 14:25:21 Shutter LASER close 14:25:21 Received message from Camera: op=State serial=108823 14:25:21 GetSingleValue result=40 Value=cccccccc 14:25:21 SkyScan query 14:25:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:25:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:21 Parameters OK 14:25:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:21 Set A/D data flow result=40 14:25:21 Set A/D channel type result=40 14:25:21 Set A/D encoding result=40 14:25:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:21 Set channel filter=0.000000e+000 result=40 14:25:21 Config A/D Result=40 14:25:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:21 Get A/D filter: -9.255963e+061 result=40 14:25:21 Get A/D value=-858993460 result=40 14:25:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:21 Parameters OK 14:25:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:21 Set A/D data flow result=40 14:25:21 Set A/D channel type result=40 14:25:21 Set A/D encoding result=40 14:25:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:21 Set channel filter=0.000000e+000 result=40 14:25:21 Config A/D Result=40 14:25:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:21 Get A/D filter: -9.255963e+061 result=40 14:25:21 Get A/D value=-858993460 result=40 14:25:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:25:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:25:21 Aux= 14:25:21 Message to Camera, serial 108823 queued 14:25:58 Received message from Master: op=PointingHead serial=108836 14:25:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:25:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:25:59 Point started: ret=0 14:25:59 point_skyscan result=0 14:25:59 Check angles 14:25:59 SkyScan query 14:26:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:26:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:26:00 Message to Master queued w/err=0: serial=108836 error=0 14:26:05 Received message from Master: op=Filter serial=108837 14:26:05 Color wheel filter change from 0 to 0 14:26:05 FLIGetFilterPos err=0 currentPosition=0 14:26:05 FLIGetStepsRemaining err=0 RemainingSteps=0 14:26:05 Filter is already there-color wheel unchanged 14:26:05 Received message from Master: op=Shutter serial=108838 14:26:05 Shutter LASER close 14:26:05 Received message from Camera: op=State serial=108840 14:26:05 GetSingleValue result=40 Value=cccccccc 14:26:05 SkyScan query 14:26:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:26:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:06 Parameters OK 14:26:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:06 Set A/D data flow result=40 14:26:06 Set A/D channel type result=40 14:26:06 Set A/D encoding result=40 14:26:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:06 Set channel filter=0.000000e+000 result=40 14:26:06 Config A/D Result=40 14:26:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:06 Get A/D filter: -9.255963e+061 result=40 14:26:06 Get A/D value=-858993460 result=40 14:26:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:06 Parameters OK 14:26:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:06 Set A/D data flow result=40 14:26:06 Set A/D channel type result=40 14:26:06 Set A/D encoding result=40 14:26:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:06 Set channel filter=0.000000e+000 result=40 14:26:06 Config A/D Result=40 14:26:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:06 Get A/D filter: -9.255963e+061 result=40 14:26:06 Get A/D value=-858993460 result=40 14:26:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:26:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:26:06 Aux= 14:26:06 Message to Camera, serial 108840 queued 14:26:42 Received message from Master: op=PointingHead serial=108853 14:26:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:26:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:26:43 Point started: ret=0 14:26:43 point_skyscan result=0 14:26:44 Check angles 14:26:44 SkyScan query 14:26:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:26:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:26:44 Message to Master queued w/err=0: serial=108853 error=0 14:26:49 Received message from Master: op=Filter serial=108854 14:26:49 Color wheel filter change from 0 to 0 14:26:49 FLIGetFilterPos err=0 currentPosition=0 14:26:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:26:49 Filter is already there-color wheel unchanged 14:26:49 Received message from Master: op=Shutter serial=108855 14:26:49 Shutter LASER close 14:26:49 Received message from Camera: op=State serial=108857 14:26:49 GetSingleValue result=40 Value=cccccccc 14:26:49 SkyScan query 14:26:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:26:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:50 Parameters OK 14:26:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:50 Set A/D data flow result=40 14:26:50 Set A/D channel type result=40 14:26:50 Set A/D encoding result=40 14:26:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:50 Set channel filter=0.000000e+000 result=40 14:26:50 Config A/D Result=40 14:26:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:50 Get A/D filter: -9.255963e+061 result=40 14:26:50 Get A/D value=-858993460 result=40 14:26:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:50 Parameters OK 14:26:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:50 Set A/D data flow result=40 14:26:50 Set A/D channel type result=40 14:26:50 Set A/D encoding result=40 14:26:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:50 Set channel filter=0.000000e+000 result=40 14:26:50 Config A/D Result=40 14:26:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:50 Get A/D filter: -9.255963e+061 result=40 14:26:50 Get A/D value=-858993460 result=40 14:26:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:26:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:26:50 Aux= 14:26:50 Message to Camera, serial 108857 queued 14:27:27 Received message from Master: op=PointingHead serial=108870 14:27:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:27:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:27:27 Point started: ret=0 14:27:27 point_skyscan result=0 14:27:28 Check angles 14:27:28 SkyScan query 14:27:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:27:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:27:28 Message to Master queued w/err=0: serial=108870 error=0 14:27:33 Received message from Master: op=Filter serial=108871 14:27:33 Color wheel filter change from 0 to 0 14:27:33 FLIGetFilterPos err=0 currentPosition=0 14:27:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:27:33 Filter is already there-color wheel unchanged 14:27:34 Received message from Master: op=Shutter serial=108872 14:27:34 Shutter LASER close 14:27:34 Received message from Camera: op=State serial=108874 14:27:34 GetSingleValue result=40 Value=cccccccc 14:27:34 SkyScan query 14:27:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:27:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:34 Parameters OK 14:27:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:34 Set A/D data flow result=40 14:27:34 Set A/D channel type result=40 14:27:34 Set A/D encoding result=40 14:27:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:34 Set channel filter=0.000000e+000 result=40 14:27:34 Config A/D Result=40 14:27:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:34 Get A/D filter: -9.255963e+061 result=40 14:27:34 Get A/D value=-858993460 result=40 14:27:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:34 Parameters OK 14:27:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:34 Set A/D data flow result=40 14:27:34 Set A/D channel type result=40 14:27:34 Set A/D encoding result=40 14:27:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:34 Set channel filter=0.000000e+000 result=40 14:27:34 Config A/D Result=40 14:27:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:34 Get A/D filter: -9.255963e+061 result=40 14:27:34 Get A/D value=-858993460 result=40 14:27:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:27:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:27:34 Aux= 14:27:34 Message to Camera, serial 108874 queued 14:28:11 Received message from Master: op=PointingHead serial=108887 14:28:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:28:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:28:11 Point started: ret=0 14:28:11 point_skyscan result=0 14:28:12 Check angles 14:28:12 SkyScan query 14:28:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 14:28:13 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 14:28:13 Check angles 14:28:13 SkyScan query 14:28:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 14:28:13 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 14:28:14 Check angles 14:28:14 SkyScan query 14:28:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.995<-16333 Statuses=0008 0009 14:28:14 Msec=1500 True Az=112.995 Ze=-64.995 Az status=0008 Ze status=0009 14:28:14 Check angles 14:28:14 SkyScan query 14:28:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.965<-17731 Statuses=0008 0009 14:28:15 Msec=2250 True Az=112.995 Ze=-85.965 Az status=0008 Ze status=0009 14:28:15 Check angles 14:28:15 SkyScan query 14:28:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.875<-19125 Statuses=0008 0009 14:28:16 Msec=3000 True Az=112.995 Ze=-106.875 Az status=0008 Ze status=0009 14:28:16 Check angles 14:28:16 SkyScan query 14:28:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.86<-20524 Statuses=0008 0009 14:28:16 Msec=3750 True Az=112.995 Ze=-127.86 Az status=0008 Ze status=0009 14:28:17 Check angles 14:28:17 SkyScan query 14:28:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.785<-21919 Statuses=0008 0009 14:28:17 Msec=4500 True Az=112.995 Ze=-148.785 Az status=0008 Ze status=0009 14:28:17 Check angles 14:28:17 SkyScan query 14:28:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.74<-23316 Statuses=0008 0009 14:28:18 Msec=5250 True Az=112.995 Ze=-169.74 Az status=0008 Ze status=0009 14:28:18 Check angles 14:28:18 SkyScan query 14:28:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:28:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:28:19 Message to Master queued w/err=0: serial=108887 error=0 14:28:24 Received message from Master: op=Filter serial=108888 14:28:24 Color wheel filter change from 0 to 0 14:28:24 FLIGetFilterPos err=0 currentPosition=0 14:28:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:24 Filter is already there-color wheel unchanged 14:28:24 Received message from Master: op=Shutter serial=108889 14:28:24 Shutter LASER open 14:28:24 Received message from Camera: op=State serial=108891 14:28:24 GetSingleValue result=40 Value=cccccccc 14:28:24 SkyScan query 14:28:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:28:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:25 Parameters OK 14:28:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:25 Set A/D data flow result=40 14:28:25 Set A/D channel type result=40 14:28:25 Set A/D encoding result=40 14:28:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:25 Set channel filter=0.000000e+000 result=40 14:28:25 Config A/D Result=40 14:28:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:25 Get A/D filter: -9.255963e+061 result=40 14:28:25 Get A/D value=-858993460 result=40 14:28:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:25 Parameters OK 14:28:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:25 Set A/D data flow result=40 14:28:25 Set A/D channel type result=40 14:28:25 Set A/D encoding result=40 14:28:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:25 Set channel filter=0.000000e+000 result=40 14:28:25 Config A/D Result=40 14:28:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:25 Get A/D filter: -9.255963e+061 result=40 14:28:25 Get A/D value=-858993460 result=40 14:28:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:25 Aux= 14:28:25 Message to Camera, serial 108891 queued 14:28:32 Received message from Master: op=Shutter serial=108900 14:28:32 Shutter LASER close 14:28:33 Received message from Master: op=PointingHead serial=108904 14:28:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:28:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:28:33 Point started: ret=0 14:28:33 point_skyscan result=0 14:28:34 Check angles 14:28:34 SkyScan query 14:28:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 14:28:34 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 14:28:35 Check angles 14:28:35 SkyScan query 14:28:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 14:28:35 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 14:28:35 Check angles 14:28:35 SkyScan query 14:28:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.445<-18763 Statuses=0008 0009 14:28:36 Msec=1500 True Az=112.995 Ze=-101.445 Az status=0008 Ze status=0009 14:28:36 Check angles 14:28:36 SkyScan query 14:28:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.46<-17364 Statuses=0008 0009 14:28:37 Msec=2250 True Az=112.995 Ze=-80.46 Az status=0008 Ze status=0009 14:28:37 Check angles 14:28:37 SkyScan query 14:28:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.535<-15969 Statuses=0008 0009 14:28:37 Msec=3000 True Az=112.995 Ze=-59.535 Az status=0008 Ze status=0009 14:28:38 Check angles 14:28:38 SkyScan query 14:28:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.55<-14570 Statuses=0008 0009 14:28:38 Msec=3750 True Az=112.995 Ze=-38.55 Az status=0008 Ze status=0009 14:28:38 Check angles 14:28:38 SkyScan query 14:28:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.595<-13173 Statuses=0008 0009 14:28:39 Msec=4500 True Az=112.995 Ze=-17.595 Az status=0008 Ze status=0009 14:28:39 Check angles 14:28:39 SkyScan query 14:28:40 SkyScan query done: ret=0 az=112.995<-7533 ze=3.39<-11774 Statuses=0008 0009 14:28:40 Msec=5250 True Az=112.995 Ze=3.39 Az status=0008 Ze status=0009 14:28:40 Check angles 14:28:40 SkyScan query 14:28:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:28:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:28:40 Message to Master queued w/err=0: serial=108904 error=0 14:28:45 Received message from Master: op=Filter serial=108905 14:28:45 Color wheel filter change from 0 to 0 14:28:45 FLIGetFilterPos err=0 currentPosition=0 14:28:45 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:45 Filter is already there-color wheel unchanged 14:28:46 Received message from Master: op=Shutter serial=108906 14:28:46 Shutter LASER close 14:28:46 Received message from Camera: op=State serial=108908 14:28:46 GetSingleValue result=40 Value=cccccccc 14:28:46 SkyScan query 14:28:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:28:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:46 Parameters OK 14:28:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:46 Set A/D data flow result=40 14:28:46 Set A/D channel type result=40 14:28:46 Set A/D encoding result=40 14:28:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:46 Set channel filter=0.000000e+000 result=40 14:28:46 Config A/D Result=40 14:28:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:46 Get A/D filter: -9.255963e+061 result=40 14:28:46 Get A/D value=-858993460 result=40 14:28:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:46 Parameters OK 14:28:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:46 Set A/D data flow result=40 14:28:46 Set A/D channel type result=40 14:28:46 Set A/D encoding result=40 14:28:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:46 Set channel filter=0.000000e+000 result=40 14:28:46 Config A/D Result=40 14:28:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:46 Get A/D filter: -9.255963e+061 result=40 14:28:46 Get A/D value=-858993460 result=40 14:28:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:46 Aux= 14:28:46 Message to Camera, serial 108908 queued 14:29:23 Received message from Master: op=PointingHead serial=108921 14:29:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:29:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:29:24 Point started: ret=0 14:29:24 point_skyscan result=0 14:29:24 Check angles 14:29:24 SkyScan query 14:29:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:29:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:29:25 Message to Master queued w/err=0: serial=108921 error=0 14:29:30 Received message from Master: op=Filter serial=108922 14:29:30 Color wheel filter change from 0 to 0 14:29:30 FLIGetFilterPos err=0 currentPosition=0 14:29:30 FLIGetStepsRemaining err=0 RemainingSteps=0 14:29:30 Filter is already there-color wheel unchanged 14:29:30 Received message from Master: op=Shutter serial=108923 14:29:30 Shutter LASER close 14:29:30 Received message from Camera: op=State serial=108925 14:29:30 GetSingleValue result=40 Value=cccccccc 14:29:30 SkyScan query 14:29:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:29:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:31 Parameters OK 14:29:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:31 Set A/D data flow result=40 14:29:31 Set A/D channel type result=40 14:29:31 Set A/D encoding result=40 14:29:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:31 Set channel filter=0.000000e+000 result=40 14:29:31 Config A/D Result=40 14:29:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:31 Get A/D filter: -9.255963e+061 result=40 14:29:31 Get A/D value=-858993460 result=40 14:29:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:31 Parameters OK 14:29:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:31 Set A/D data flow result=40 14:29:31 Set A/D channel type result=40 14:29:31 Set A/D encoding result=40 14:29:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:31 Set channel filter=0.000000e+000 result=40 14:29:31 Config A/D Result=40 14:29:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:31 Get A/D filter: -9.255963e+061 result=40 14:29:31 Get A/D value=-858993460 result=40 14:29:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:29:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:29:31 Aux= 14:29:31 Message to Camera, serial 108925 queued 14:30:07 Received message from Master: op=PointingHead serial=108938 14:30:07 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:30:07 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:30:08 Point started: ret=0 14:30:08 point_skyscan result=0 14:30:09 Check angles 14:30:09 SkyScan query 14:30:09 SkyScan query done: ret=0 az=135.66<-9044 ze=-6.51<-12434 Statuses=0009 0008 14:30:09 Msec=0 True Az=135.66 Ze=-6.51 Az status=0009 Ze status=0008 14:30:09 Check angles 14:30:09 SkyScan query 14:30:10 SkyScan query done: ret=0 az=153.165<-10211 ze=-6.495<-12433 Statuses=0009 0008 14:30:10 Msec=750 True Az=153.165 Ze=-6.495 Az status=0009 Ze status=0008 14:30:10 Check angles 14:30:10 SkyScan query 14:30:11 SkyScan query done: ret=0 az=170.73<-11382 ze=-6.495<-12433 Statuses=0009 0008 14:30:11 Msec=1500 True Az=170.73 Ze=-6.495 Az status=0009 Ze status=0008 14:30:11 Check angles 14:30:11 SkyScan query 14:30:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:30:11 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:30:11 Message to Master queued w/err=0: serial=108938 error=0 14:30:16 Received message from Master: op=Filter serial=108939 14:30:16 Color wheel filter change from 0 to 0 14:30:16 FLIGetFilterPos err=0 currentPosition=0 14:30:16 FLIGetStepsRemaining err=0 RemainingSteps=0 14:30:16 Filter is already there-color wheel unchanged 14:30:17 Received message from Master: op=Shutter serial=108940 14:30:17 Shutter LASER close 14:30:17 Received message from Camera: op=State serial=108942 14:30:17 GetSingleValue result=40 Value=cccccccc 14:30:17 SkyScan query 14:30:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:30:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:17 Parameters OK 14:30:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:17 Set A/D data flow result=40 14:30:17 Set A/D channel type result=40 14:30:17 Set A/D encoding result=40 14:30:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:17 Set channel filter=0.000000e+000 result=40 14:30:17 Config A/D Result=40 14:30:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:17 Get A/D filter: -9.255963e+061 result=40 14:30:17 Get A/D value=-858993460 result=40 14:30:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:17 Parameters OK 14:30:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:17 Set A/D data flow result=40 14:30:17 Set A/D channel type result=40 14:30:17 Set A/D encoding result=40 14:30:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:17 Set channel filter=0.000000e+000 result=40 14:30:17 Config A/D Result=40 14:30:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:17 Get A/D filter: -9.255963e+061 result=40 14:30:17 Get A/D value=-858993460 result=40 14:30:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:30:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:30:17 Aux= 14:30:17 Message to Camera, serial 108942 queued 14:30:54 Received message from Master: op=PointingHead serial=108955 14:30:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:30:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:30:54 Point started: ret=0 14:30:54 point_skyscan result=0 14:30:55 Check angles 14:30:55 SkyScan query 14:30:56 SkyScan query done: ret=0 az=152.925<-10195 ze=6.51<-11566 Statuses=0009 0008 14:30:56 Msec=0 True Az=152.925 Ze=6.51 Az status=0009 Ze status=0008 14:30:56 Check angles 14:30:56 SkyScan query 14:30:56 SkyScan query done: ret=0 az=135.405<-9027 ze=6.495<-11567 Statuses=0009 0008 14:30:56 Msec=750 True Az=135.405 Ze=6.495 Az status=0009 Ze status=0008 14:30:57 Check angles 14:30:57 SkyScan query 14:30:57 SkyScan query done: ret=0 az=117.93<-7862 ze=6.495<-11567 Statuses=0009 0008 14:30:57 Msec=1500 True Az=117.93 Ze=6.495 Az status=0009 Ze status=0008 14:30:57 Check angles 14:30:57 SkyScan query 14:30:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:30:58 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:30:58 Message to Master queued w/err=0: serial=108955 error=0 14:31:03 Received message from Master: op=Filter serial=108956 14:31:03 Color wheel filter change from 0 to 0 14:31:03 FLIGetFilterPos err=0 currentPosition=0 14:31:03 FLIGetStepsRemaining err=0 RemainingSteps=0 14:31:03 Filter is already there-color wheel unchanged 14:31:03 Received message from Master: op=Shutter serial=108957 14:31:03 Shutter LASER close 14:31:03 Received message from Camera: op=State serial=108959 14:31:03 GetSingleValue result=40 Value=cccccccc 14:31:03 SkyScan query 14:31:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:31:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:04 Parameters OK 14:31:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:04 Set A/D data flow result=40 14:31:04 Set A/D channel type result=40 14:31:04 Set A/D encoding result=40 14:31:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:04 Set channel filter=0.000000e+000 result=40 14:31:04 Config A/D Result=40 14:31:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:04 Get A/D filter: -9.255963e+061 result=40 14:31:04 Get A/D value=-858993460 result=40 14:31:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:04 Parameters OK 14:31:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:04 Set A/D data flow result=40 14:31:04 Set A/D channel type result=40 14:31:04 Set A/D encoding result=40 14:31:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:04 Set channel filter=0.000000e+000 result=40 14:31:04 Config A/D Result=40 14:31:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:04 Get A/D filter: -9.255963e+061 result=40 14:31:04 Get A/D value=-858993460 result=40 14:31:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:31:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:31:04 Aux= 14:31:04 Message to Camera, serial 108959 queued 14:31:41 Received message from Master: op=PointingHead serial=108972 14:31:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:31:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:31:41 Point started: ret=0 14:31:41 point_skyscan result=0 14:31:42 Check angles 14:31:42 SkyScan query 14:31:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 14:31:42 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 14:31:42 Check angles 14:31:42 SkyScan query 14:31:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.73<-14982 Statuses=0008 0009 14:31:43 Msec=750 True Az=112.995 Ze=-44.73 Az status=0008 Ze status=0009 14:31:43 Check angles 14:31:43 SkyScan query 14:31:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 14:31:44 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 14:31:44 Check angles 14:31:44 SkyScan query 14:31:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.67<-17778 Statuses=0008 0009 14:31:45 Msec=2250 True Az=112.995 Ze=-86.67 Az status=0008 Ze status=0009 14:31:45 Check angles 14:31:45 SkyScan query 14:31:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.105<-19207 Statuses=0008 0009 14:31:45 Msec=3000 True Az=112.995 Ze=-108.105 Az status=0008 Ze status=0009 14:31:45 Check angles 14:31:45 SkyScan query 14:31:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.03<-20602 Statuses=0008 0009 14:31:46 Msec=3750 True Az=112.995 Ze=-129.03 Az status=0008 Ze status=0009 14:31:46 Check angles 14:31:46 SkyScan query 14:31:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.375<-22025 Statuses=0008 0009 14:31:47 Msec=4500 True Az=112.995 Ze=-150.375 Az status=0008 Ze status=0009 14:31:47 Check angles 14:31:47 SkyScan query 14:31:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.15<-23410 Statuses=0008 0009 14:31:48 Msec=5250 True Az=112.995 Ze=-171.15 Az status=0008 Ze status=0009 14:31:48 Check angles 14:31:48 SkyScan query 14:31:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:31:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:31:48 Message to Master queued w/err=0: serial=108972 error=0 14:31:53 Received message from Master: op=Filter serial=108973 14:31:53 Color wheel filter change from 0 to 0 14:31:53 FLIGetFilterPos err=0 currentPosition=0 14:31:53 FLIGetStepsRemaining err=0 RemainingSteps=0 14:31:53 Filter is already there-color wheel unchanged 14:31:53 Received message from Master: op=Shutter serial=108974 14:31:53 Shutter LASER open 14:31:54 Received message from Camera: op=State serial=108976 14:31:54 GetSingleValue result=40 Value=cccccccc 14:31:54 SkyScan query 14:31:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:31:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:54 Parameters OK 14:31:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:54 Set A/D data flow result=40 14:31:54 Set A/D channel type result=40 14:31:54 Set A/D encoding result=40 14:31:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:54 Set channel filter=0.000000e+000 result=40 14:31:54 Config A/D Result=40 14:31:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:54 Get A/D filter: -9.255963e+061 result=40 14:31:54 Get A/D value=-858993460 result=40 14:31:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:54 Parameters OK 14:31:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:54 Set A/D data flow result=40 14:31:54 Set A/D channel type result=40 14:31:54 Set A/D encoding result=40 14:31:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:54 Set channel filter=0.000000e+000 result=40 14:31:54 Config A/D Result=40 14:31:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:54 Get A/D filter: -9.255963e+061 result=40 14:31:54 Get A/D value=-858993460 result=40 14:31:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:31:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:31:54 Aux= 14:31:54 Message to Camera, serial 108976 queued 14:32:03 Received message from Master: op=Shutter serial=108986 14:32:03 Shutter LASER close 14:32:03 Received message from Master: op=PointingHead serial=108990 14:32:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:32:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:32:03 Point started: ret=0 14:32:03 point_skyscan result=0 14:32:04 Check angles 14:32:04 SkyScan query 14:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 14:32:05 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 14:32:05 Check angles 14:32:05 SkyScan query 14:32:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.8<-20120 Statuses=0008 0009 14:32:06 Msec=750 True Az=112.995 Ze=-121.8 Az status=0008 Ze status=0009 14:32:06 Check angles 14:32:06 SkyScan query 14:32:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.905<-18727 Statuses=0008 0009 14:32:06 Msec=1500 True Az=112.995 Ze=-100.905 Az status=0008 Ze status=0009 14:32:06 Check angles 14:32:06 SkyScan query 14:32:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.41<-17294 Statuses=0008 0009 14:32:07 Msec=2250 True Az=112.995 Ze=-79.41 Az status=0008 Ze status=0009 14:32:07 Check angles 14:32:07 SkyScan query 14:32:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.47<-15898 Statuses=0008 0009 14:32:08 Msec=3000 True Az=112.995 Ze=-58.47 Az status=0008 Ze status=0009 14:32:08 Check angles 14:32:08 SkyScan query 14:32:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.545<-14503 Statuses=0008 0009 14:32:09 Msec=3750 True Az=112.995 Ze=-37.545 Az status=0008 Ze status=0009 14:32:09 Check angles 14:32:09 SkyScan query 14:32:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.17<-13078 Statuses=0008 0009 14:32:09 Msec=4500 True Az=112.995 Ze=-16.17 Az status=0008 Ze status=0009 14:32:09 Check angles 14:32:09 SkyScan query 14:32:10 SkyScan query done: ret=0 az=112.995<-7533 ze=4.605<-11693 Statuses=0008 0009 14:32:10 Msec=5250 True Az=112.995 Ze=4.605 Az status=0008 Ze status=0009 14:32:10 Check angles 14:32:10 SkyScan query 14:32:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:32:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:32:11 Message to Master queued w/err=0: serial=108990 error=0 14:32:16 Received message from Master: op=Filter serial=108991 14:32:16 Color wheel filter change from 0 to 0 14:32:16 FLIGetFilterPos err=0 currentPosition=0 14:32:16 FLIGetStepsRemaining err=0 RemainingSteps=0 14:32:16 Filter is already there-color wheel unchanged 14:32:16 Received message from Master: op=Shutter serial=108992 14:32:16 Shutter LASER close 14:32:16 Received message from Camera: op=State serial=108994 14:32:16 GetSingleValue result=40 Value=cccccccc 14:32:16 SkyScan query 14:32:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:32:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:17 Parameters OK 14:32:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:17 Set A/D data flow result=40 14:32:17 Set A/D channel type result=40 14:32:17 Set A/D encoding result=40 14:32:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:17 Set channel filter=0.000000e+000 result=40 14:32:17 Config A/D Result=40 14:32:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:17 Get A/D filter: -9.255963e+061 result=40 14:32:17 Get A/D value=-858993460 result=40 14:32:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:17 Parameters OK 14:32:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:17 Set A/D data flow result=40 14:32:17 Set A/D channel type result=40 14:32:17 Set A/D encoding result=40 14:32:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:17 Set channel filter=0.000000e+000 result=40 14:32:17 Config A/D Result=40 14:32:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:17 Get A/D filter: -9.255963e+061 result=40 14:32:17 Get A/D value=-858993460 result=40 14:32:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:32:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:32:17 Aux= 14:32:17 Message to Camera, serial 108994 queued 14:32:54 Received message from Master: op=PointingHead serial=109007 14:32:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:32:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:32:54 Point started: ret=0 14:32:54 point_skyscan result=0 14:32:55 Check angles 14:32:55 SkyScan query 14:32:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:32:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:32:55 Message to Master queued w/err=0: serial=109007 error=0 14:33:00 Received message from Master: op=Filter serial=109008 14:33:00 Color wheel filter change from 0 to 0 14:33:00 FLIGetFilterPos err=0 currentPosition=0 14:33:00 FLIGetStepsRemaining err=0 RemainingSteps=0 14:33:00 Filter is already there-color wheel unchanged 14:33:00 Received message from Master: op=Shutter serial=109009 14:33:00 Shutter LASER close 14:33:01 Received message from Camera: op=State serial=109011 14:33:01 GetSingleValue result=40 Value=cccccccc 14:33:01 SkyScan query 14:33:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:33:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:01 Parameters OK 14:33:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:01 Set A/D data flow result=40 14:33:01 Set A/D channel type result=40 14:33:01 Set A/D encoding result=40 14:33:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:01 Set channel filter=0.000000e+000 result=40 14:33:01 Config A/D Result=40 14:33:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:01 Get A/D filter: -9.255963e+061 result=40 14:33:01 Get A/D value=-858993460 result=40 14:33:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:01 Parameters OK 14:33:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:01 Set A/D data flow result=40 14:33:01 Set A/D channel type result=40 14:33:01 Set A/D encoding result=40 14:33:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:01 Set channel filter=0.000000e+000 result=40 14:33:01 Config A/D Result=40 14:33:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:01 Get A/D filter: -9.255963e+061 result=40 14:33:01 Get A/D value=-858993460 result=40 14:33:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:33:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:33:01 Aux= 14:33:01 Message to Camera, serial 109011 queued 14:33:38 Received message from Master: op=Identify serial=109023 14:33:38 Received message from Master: op=PointingHead serial=109027 14:33:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:33:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:33:38 Point started: ret=0 14:33:38 point_skyscan result=0 14:33:39 Check angles 14:33:39 SkyScan query 14:33:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:33:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:33:40 Message to Master queued w/err=0: serial=109027 error=0 14:33:45 Received message from Master: op=Filter serial=109028 14:33:45 Color wheel filter change from 0 to 0 14:33:45 FLIGetFilterPos err=0 currentPosition=0 14:33:45 FLIGetStepsRemaining err=0 RemainingSteps=0 14:33:45 Filter is already there-color wheel unchanged 14:33:45 Received message from Master: op=Shutter serial=109029 14:33:45 Shutter LASER close 14:33:45 Received message from Camera: op=State serial=109031 14:33:45 GetSingleValue result=40 Value=cccccccc 14:33:45 SkyScan query 14:33:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:33:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:45 Parameters OK 14:33:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:45 Set A/D data flow result=40 14:33:45 Set A/D channel type result=40 14:33:45 Set A/D encoding result=40 14:33:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:45 Set channel filter=0.000000e+000 result=40 14:33:45 Config A/D Result=40 14:33:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:45 Get A/D filter: -9.255963e+061 result=40 14:33:45 Get A/D value=-858993460 result=40 14:33:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:45 Parameters OK 14:33:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:45 Set A/D data flow result=40 14:33:45 Set A/D channel type result=40 14:33:45 Set A/D encoding result=40 14:33:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:45 Set channel filter=0.000000e+000 result=40 14:33:45 Config A/D Result=40 14:33:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:45 Get A/D filter: -9.255963e+061 result=40 14:33:45 Get A/D value=-858993460 result=40 14:33:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:33:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:33:45 Aux= [UTC 2019-3-4 14:33:45] 14:33:45 Message to Camera, serial 109031 queued 14:34:22 Received message from Master: op=PointingHead serial=109044 14:34:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:34:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:34:23 Point started: ret=0 14:34:23 point_skyscan result=0 14:34:23 Check angles 14:34:23 SkyScan query 14:34:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:34:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:34:24 Message to Master queued w/err=0: serial=109044 error=0 14:34:29 Received message from Master: op=Filter serial=109045 14:34:29 Color wheel filter change from 0 to 0 14:34:29 FLIGetFilterPos err=0 currentPosition=0 14:34:29 FLIGetStepsRemaining err=0 RemainingSteps=0 14:34:29 Filter is already there-color wheel unchanged 14:34:29 Received message from Master: op=Shutter serial=109046 14:34:29 Shutter LASER close 14:34:29 Received message from Camera: op=State serial=109048 14:34:29 GetSingleValue result=40 Value=cccccccc 14:34:29 SkyScan query 14:34:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:34:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:30 Parameters OK 14:34:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:30 Set A/D data flow result=40 14:34:30 Set A/D channel type result=40 14:34:30 Set A/D encoding result=40 14:34:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:30 Set channel filter=0.000000e+000 result=40 14:34:30 Config A/D Result=40 14:34:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:30 Get A/D filter: -9.255963e+061 result=40 14:34:30 Get A/D value=-858993460 result=40 14:34:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:30 Parameters OK 14:34:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:30 Set A/D data flow result=40 14:34:30 Set A/D channel type result=40 14:34:30 Set A/D encoding result=40 14:34:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:30 Set channel filter=0.000000e+000 result=40 14:34:30 Config A/D Result=40 14:34:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:30 Get A/D filter: -9.255963e+061 result=40 14:34:30 Get A/D value=-858993460 result=40 14:34:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:34:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:34:30 Aux= 14:34:30 Message to Camera, serial 109048 queued 14:35:07 Received message from Master: op=PointingHead serial=109061 14:35:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:35:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:35:07 Point started: ret=0 14:35:07 point_skyscan result=0 14:35:08 Check angles 14:35:08 SkyScan query 14:35:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 14:35:08 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 14:35:08 Check angles 14:35:08 SkyScan query 14:35:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 14:35:09 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 14:35:09 Check angles 14:35:09 SkyScan query 14:35:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.535<-16369 Statuses=0008 0009 14:35:10 Msec=1500 True Az=112.995 Ze=-65.535 Az status=0008 Ze status=0009 14:35:10 Check angles 14:35:10 SkyScan query 14:35:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.52<-17768 Statuses=0008 0009 14:35:10 Msec=2250 True Az=112.995 Ze=-86.52 Az status=0008 Ze status=0009 14:35:11 Check angles 14:35:11 SkyScan query 14:35:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.475<-19165 Statuses=0008 0009 14:35:11 Msec=3000 True Az=112.995 Ze=-107.475 Az status=0008 Ze status=0009 14:35:11 Check angles 14:35:11 SkyScan query 14:35:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.445<-20563 Statuses=0008 0009 14:35:12 Msec=3750 True Az=112.995 Ze=-128.445 Az status=0008 Ze status=0009 14:35:12 Check angles 14:35:12 SkyScan query 14:35:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.445<-21963 Statuses=0008 0009 14:35:13 Msec=4500 True Az=112.995 Ze=-149.445 Az status=0008 Ze status=0009 14:35:13 Check angles 14:35:13 SkyScan query 14:35:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.385<-23359 Statuses=0008 0009 14:35:13 Msec=5250 True Az=112.995 Ze=-170.385 Az status=0008 Ze status=0009 14:35:14 Check angles 14:35:14 SkyScan query 14:35:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:35:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:35:14 Message to Master queued w/err=0: serial=109061 error=0 14:35:19 Received message from Master: op=Filter serial=109062 14:35:19 Color wheel filter change from 0 to 0 14:35:19 FLIGetFilterPos err=0 currentPosition=0 14:35:19 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:19 Filter is already there-color wheel unchanged 14:35:19 Received message from Master: op=Shutter serial=109063 14:35:19 Shutter LASER open 14:35:20 Received message from Camera: op=State serial=109065 14:35:20 GetSingleValue result=40 Value=cccccccc 14:35:20 SkyScan query 14:35:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:35:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:20 Parameters OK 14:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:20 Set A/D data flow result=40 14:35:20 Set A/D channel type result=40 14:35:20 Set A/D encoding result=40 14:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:20 Set channel filter=0.000000e+000 result=40 14:35:20 Config A/D Result=40 14:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:20 Get A/D filter: -9.255963e+061 result=40 14:35:20 Get A/D value=-858993460 result=40 14:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:20 Parameters OK 14:35:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:20 Set A/D data flow result=40 14:35:20 Set A/D channel type result=40 14:35:20 Set A/D encoding result=40 14:35:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:20 Set channel filter=0.000000e+000 result=40 14:35:20 Config A/D Result=40 14:35:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:20 Get A/D filter: -9.255963e+061 result=40 14:35:20 Get A/D value=-858993460 result=40 14:35:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:35:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:35:20 Aux= 14:35:20 Message to Camera, serial 109065 queued 14:35:29 Received message from Master: op=Shutter serial=109075 14:35:29 Shutter LASER close 14:35:29 Received message from Master: op=PointingHead serial=109079 14:35:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:35:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:35:30 Point started: ret=0 14:35:30 point_skyscan result=0 14:35:30 Check angles 14:35:30 SkyScan query 14:35:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 14:35:31 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 14:35:31 Check angles 14:35:31 SkyScan query 14:35:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.41<-20094 Statuses=0008 0009 14:35:32 Msec=750 True Az=112.995 Ze=-121.41 Az status=0008 Ze status=0009 14:35:32 Check angles 14:35:32 SkyScan query 14:35:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.425<-18695 Statuses=0008 0009 14:35:32 Msec=1500 True Az=112.995 Ze=-100.425 Az status=0008 Ze status=0009 14:35:33 Check angles 14:35:33 SkyScan query 14:35:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.47<-17298 Statuses=0008 0009 14:35:33 Msec=2250 True Az=112.995 Ze=-79.47 Az status=0008 Ze status=0009 14:35:33 Check angles 14:35:33 SkyScan query 14:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.515<-15901 Statuses=0008 0009 14:35:34 Msec=3000 True Az=112.995 Ze=-58.515 Az status=0008 Ze status=0009 14:35:34 Check angles 14:35:34 SkyScan query 14:35:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.59<-14506 Statuses=0008 0009 14:35:35 Msec=3750 True Az=112.995 Ze=-37.59 Az status=0008 Ze status=0009 14:35:35 Check angles 14:35:35 SkyScan query 14:35:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.62<-13108 Statuses=0008 0009 14:35:35 Msec=4500 True Az=112.995 Ze=-16.62 Az status=0008 Ze status=0009 14:35:36 Check angles 14:35:36 SkyScan query 14:35:36 SkyScan query done: ret=0 az=113.01<-7534 ze=4.245<-11717 Statuses=0008 0009 14:35:36 Msec=5250 True Az=113.01 Ze=4.245 Az status=0008 Ze status=0009 14:35:36 Check angles 14:35:36 SkyScan query 14:35:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:35:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:35:37 Message to Master queued w/err=0: serial=109079 error=0 14:35:42 Received message from Master: op=Filter serial=109080 14:35:42 Color wheel filter change from 0 to 0 14:35:42 FLIGetFilterPos err=0 currentPosition=0 14:35:42 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:42 Filter is already there-color wheel unchanged 14:35:42 Received message from Master: op=Shutter serial=109081 14:35:42 Shutter LASER close 14:35:42 Received message from Camera: op=State serial=109083 14:35:42 GetSingleValue result=40 Value=cccccccc 14:35:42 SkyScan query 14:35:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:35:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:43 Parameters OK 14:35:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:43 Set A/D data flow result=40 14:35:43 Set A/D channel type result=40 14:35:43 Set A/D encoding result=40 14:35:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:43 Set channel filter=0.000000e+000 result=40 14:35:43 Config A/D Result=40 14:35:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:43 Get A/D filter: -9.255963e+061 result=40 14:35:43 Get A/D value=-858993460 result=40 14:35:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:43 Parameters OK 14:35:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:43 Set A/D data flow result=40 14:35:43 Set A/D channel type result=40 14:35:43 Set A/D encoding result=40 14:35:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:43 Set channel filter=0.000000e+000 result=40 14:35:43 Config A/D Result=40 14:35:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:43 Get A/D filter: -9.255963e+061 result=40 14:35:43 Get A/D value=-858993460 result=40 14:35:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:35:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:35:43 Aux= 14:35:43 Message to Camera, serial 109083 queued 14:36:20 Received message from Master: op=PointingHead serial=109096 14:36:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:36:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:36:20 Point started: ret=0 14:36:20 point_skyscan result=0 14:36:21 Check angles 14:36:21 SkyScan query 14:36:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:36:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:36:21 Message to Master queued w/err=0: serial=109096 error=0 14:36:26 Received message from Master: op=Filter serial=109097 14:36:26 Color wheel filter change from 0 to 0 14:36:26 FLIGetFilterPos err=0 currentPosition=0 14:36:26 FLIGetStepsRemaining err=0 RemainingSteps=0 14:36:26 Filter is already there-color wheel unchanged 14:36:26 Received message from Master: op=Shutter serial=109098 14:36:26 Shutter LASER close 14:36:26 Received message from Camera: op=State serial=109100 14:36:26 GetSingleValue result=40 Value=cccccccc 14:36:26 SkyScan query 14:36:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:36:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:27 Parameters OK 14:36:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:27 Set A/D data flow result=40 14:36:27 Set A/D channel type result=40 14:36:27 Set A/D encoding result=40 14:36:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:27 Set channel filter=0.000000e+000 result=40 14:36:27 Config A/D Result=40 14:36:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:27 Get A/D filter: -9.255963e+061 result=40 14:36:27 Get A/D value=-858993460 result=40 14:36:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:27 Parameters OK 14:36:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:27 Set A/D data flow result=40 14:36:27 Set A/D channel type result=40 14:36:27 Set A/D encoding result=40 14:36:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:27 Set channel filter=0.000000e+000 result=40 14:36:27 Config A/D Result=40 14:36:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:27 Get A/D filter: -9.255963e+061 result=40 14:36:27 Get A/D value=-858993460 result=40 14:36:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:36:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:36:27 Aux= 14:36:27 Message to Camera, serial 109100 queued 14:37:04 Received message from Master: op=PointingHead serial=109113 14:37:04 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:37:04 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:37:04 Point started: ret=0 14:37:04 point_skyscan result=0 14:37:05 Check angles 14:37:05 SkyScan query 14:37:06 SkyScan query done: ret=0 az=135.84<-9056 ze=-6.51<-12434 Statuses=0009 0008 14:37:06 Msec=0 True Az=135.84 Ze=-6.51 Az status=0009 Ze status=0008 14:37:06 Check angles 14:37:06 SkyScan query 14:37:06 SkyScan query done: ret=0 az=153.285<-10219 ze=-6.51<-12434 Statuses=0009 0008 14:37:06 Msec=750 True Az=153.285 Ze=-6.51 Az status=0009 Ze status=0008 14:37:06 Check angles 14:37:06 SkyScan query 14:37:07 SkyScan query done: ret=0 az=170.715<-11381 ze=-6.495<-12433 Statuses=0009 0008 14:37:07 Msec=1500 True Az=170.715 Ze=-6.495 Az status=0009 Ze status=0008 14:37:07 Check angles 14:37:07 SkyScan query 14:37:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:37:08 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:37:08 Message to Master queued w/err=0: serial=109113 error=0 14:37:13 Received message from Master: op=Filter serial=109114 14:37:13 Color wheel filter change from 0 to 0 14:37:13 FLIGetFilterPos err=0 currentPosition=0 14:37:13 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:13 Filter is already there-color wheel unchanged 14:37:13 Received message from Master: op=Shutter serial=109115 14:37:13 Shutter LASER close 14:37:13 Received message from Camera: op=State serial=109117 14:37:13 GetSingleValue result=40 Value=cccccccc 14:37:13 SkyScan query 14:37:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:37:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:14 Parameters OK 14:37:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:14 Set A/D data flow result=40 14:37:14 Set A/D channel type result=40 14:37:14 Set A/D encoding result=40 14:37:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:14 Set channel filter=0.000000e+000 result=40 14:37:14 Config A/D Result=40 14:37:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:14 Get A/D filter: -9.255963e+061 result=40 14:37:14 Get A/D value=-858993460 result=40 14:37:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:14 Parameters OK 14:37:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:14 Set A/D data flow result=40 14:37:14 Set A/D channel type result=40 14:37:14 Set A/D encoding result=40 14:37:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:14 Set channel filter=0.000000e+000 result=40 14:37:14 Config A/D Result=40 14:37:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:14 Get A/D filter: -9.255963e+061 result=40 14:37:14 Get A/D value=-858993460 result=40 14:37:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:37:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:37:14 Aux= 14:37:14 Message to Camera, serial 109117 queued 14:37:51 Received message from Master: op=PointingHead serial=109130 14:37:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:37:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:37:51 Point started: ret=0 14:37:51 point_skyscan result=0 14:37:52 Check angles 14:37:52 SkyScan query 14:37:52 SkyScan query done: ret=0 az=153.165<-10211 ze=6.51<-11566 Statuses=0009 0008 14:37:52 Msec=0 True Az=153.165 Ze=6.51 Az status=0009 Ze status=0008 14:37:52 Check angles 14:37:52 SkyScan query 14:37:53 SkyScan query done: ret=0 az=135.63<-9042 ze=6.495<-11567 Statuses=0009 0008 14:37:53 Msec=750 True Az=135.63 Ze=6.495 Az status=0009 Ze status=0008 14:37:53 Check angles 14:37:53 SkyScan query 14:37:54 SkyScan query done: ret=0 az=118.2<-7880 ze=6.495<-11567 Statuses=0009 0008 14:37:54 Msec=1500 True Az=118.2 Ze=6.495 Az status=0009 Ze status=0008 14:37:54 Check angles 14:37:54 SkyScan query 14:37:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:37:54 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:37:54 Message to Master queued w/err=0: serial=109130 error=0 14:37:59 Received message from Master: op=Filter serial=109131 14:37:59 Color wheel filter change from 0 to 0 14:37:59 FLIGetFilterPos err=0 currentPosition=0 14:37:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:59 Filter is already there-color wheel unchanged 14:38:00 Received message from Master: op=Shutter serial=109132 14:38:00 Shutter LASER close 14:38:00 Received message from Camera: op=State serial=109134 14:38:00 GetSingleValue result=40 Value=cccccccc 14:38:00 SkyScan query 14:38:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:38:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:00 Parameters OK 14:38:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:00 Set A/D data flow result=40 14:38:00 Set A/D channel type result=40 14:38:00 Set A/D encoding result=40 14:38:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:00 Set channel filter=0.000000e+000 result=40 14:38:00 Config A/D Result=40 14:38:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:00 Get A/D filter: -9.255963e+061 result=40 14:38:00 Get A/D value=-858993460 result=40 14:38:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:00 Parameters OK 14:38:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:00 Set A/D data flow result=40 14:38:00 Set A/D channel type result=40 14:38:00 Set A/D encoding result=40 14:38:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:00 Set channel filter=0.000000e+000 result=40 14:38:00 Config A/D Result=40 14:38:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:00 Get A/D filter: -9.255963e+061 result=40 14:38:00 Get A/D value=-858993460 result=40 14:38:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:38:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:38:00 Aux= 14:38:00 Message to Camera, serial 109134 queued 14:38:37 Received message from Master: op=PointingHead serial=109147 14:38:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:38:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:38:37 Point started: ret=0 14:38:37 point_skyscan result=0 14:38:38 Check angles 14:38:38 SkyScan query 14:38:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.82<-13588 Statuses=0008 0009 14:38:39 Msec=0 True Az=112.995 Ze=-23.82 Az status=0008 Ze status=0009 14:38:39 Check angles 14:38:39 SkyScan query 14:38:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 14:38:39 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 14:38:40 Check angles 14:38:40 SkyScan query 14:38:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.15<-16410 Statuses=0008 0009 14:38:40 Msec=1500 True Az=112.995 Ze=-66.15 Az status=0008 Ze status=0009 14:38:40 Check angles 14:38:40 SkyScan query 14:38:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.12<-17808 Statuses=0008 0009 14:38:41 Msec=2250 True Az=112.995 Ze=-87.12 Az status=0008 Ze status=0009 14:38:41 Check angles 14:38:41 SkyScan query 14:38:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.09<-19206 Statuses=0008 0009 14:38:42 Msec=3000 True Az=112.995 Ze=-108.09 Az status=0008 Ze status=0009 14:38:42 Check angles 14:38:42 SkyScan query 14:38:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.42<-20628 Statuses=0008 0009 14:38:42 Msec=3750 True Az=112.995 Ze=-129.42 Az status=0008 Ze status=0009 14:38:43 Check angles 14:38:43 SkyScan query 14:38:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.345<-22023 Statuses=0008 0009 14:38:43 Msec=4500 True Az=112.995 Ze=-150.345 Az status=0008 Ze status=0009 14:38:43 Check angles 14:38:43 SkyScan query 14:38:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 14:38:44 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 14:38:44 Check angles 14:38:44 SkyScan query 14:38:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:38:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:38:45 Message to Master queued w/err=0: serial=109147 error=0 14:38:50 Received message from Master: op=Filter serial=109148 14:38:50 Color wheel filter change from 0 to 0 14:38:50 FLIGetFilterPos err=0 currentPosition=0 14:38:50 FLIGetStepsRemaining err=0 RemainingSteps=0 14:38:50 Filter is already there-color wheel unchanged 14:38:50 Received message from Master: op=Shutter serial=109149 14:38:50 Shutter LASER open 14:38:50 Received message from Camera: op=State serial=109151 14:38:50 GetSingleValue result=40 Value=cccccccc 14:38:50 SkyScan query 14:38:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:38:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:51 Parameters OK 14:38:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:51 Set A/D data flow result=40 14:38:51 Set A/D channel type result=40 14:38:51 Set A/D encoding result=40 14:38:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:51 Set channel filter=0.000000e+000 result=40 14:38:51 Config A/D Result=40 14:38:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:51 Get A/D filter: -9.255963e+061 result=40 14:38:51 Get A/D value=-858993460 result=40 14:38:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:51 Parameters OK 14:38:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:51 Set A/D data flow result=40 14:38:51 Set A/D channel type result=40 14:38:51 Set A/D encoding result=40 14:38:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:51 Set channel filter=0.000000e+000 result=40 14:38:51 Config A/D Result=40 14:38:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:51 Get A/D filter: -9.255963e+061 result=40 14:38:51 Get A/D value=-858993460 result=40 14:38:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:38:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:38:51 Aux= 14:38:51 Message to Camera, serial 109151 queued 14:38:59 Received message from Master: op=Shutter serial=109161 14:38:59 Shutter LASER close 14:39:00 Received message from Master: op=PointingHead serial=109165 14:39:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:39:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:39:00 Point started: ret=0 14:39:00 point_skyscan result=0 14:39:01 Check angles 14:39:01 SkyScan query 14:39:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 14:39:01 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 14:39:01 Check angles 14:39:01 SkyScan query 14:39:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.13<-20142 Statuses=0008 0009 14:39:02 Msec=750 True Az=112.995 Ze=-122.13 Az status=0008 Ze status=0009 14:39:02 Check angles 14:39:02 SkyScan query 14:39:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.22<-18748 Statuses=0008 0009 14:39:03 Msec=1500 True Az=112.995 Ze=-101.22 Az status=0008 Ze status=0009 14:39:03 Check angles 14:39:03 SkyScan query 14:39:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 14:39:03 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 14:39:04 Check angles 14:39:04 SkyScan query 14:39:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.31<-15954 Statuses=0008 0009 14:39:04 Msec=3000 True Az=112.995 Ze=-59.31 Az status=0008 Ze status=0009 14:39:04 Check angles 14:39:04 SkyScan query 14:39:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.265<-14551 Statuses=0008 0009 14:39:05 Msec=3750 True Az=112.995 Ze=-38.265 Az status=0008 Ze status=0009 14:39:05 Check angles 14:39:05 SkyScan query 14:39:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.325<-13155 Statuses=0008 0009 14:39:06 Msec=4500 True Az=112.995 Ze=-17.325 Az status=0008 Ze status=0009 14:39:06 Check angles 14:39:06 SkyScan query 14:39:06 SkyScan query done: ret=0 az=112.995<-7533 ze=3.66<-11756 Statuses=0008 0009 14:39:06 Msec=5250 True Az=112.995 Ze=3.66 Az status=0008 Ze status=0009 14:39:07 Check angles 14:39:07 SkyScan query 14:39:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:39:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:39:07 Message to Master queued w/err=0: serial=109165 error=0 14:39:12 Received message from Master: op=Filter serial=109166 14:39:12 Color wheel filter change from 0 to 0 14:39:12 FLIGetFilterPos err=0 currentPosition=0 14:39:12 FLIGetStepsRemaining err=0 RemainingSteps=0 14:39:12 Filter is already there-color wheel unchanged 14:39:12 Received message from Master: op=Shutter serial=109167 14:39:12 Shutter LASER close 14:39:13 Received message from Camera: op=State serial=109169 14:39:13 GetSingleValue result=40 Value=cccccccc 14:39:13 SkyScan query 14:39:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:39:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:13 Parameters OK 14:39:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:13 Set A/D data flow result=40 14:39:13 Set A/D channel type result=40 14:39:13 Set A/D encoding result=40 14:39:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:13 Set channel filter=0.000000e+000 result=40 14:39:13 Config A/D Result=40 14:39:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:13 Get A/D filter: -9.255963e+061 result=40 14:39:13 Get A/D value=-858993460 result=40 14:39:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:13 Parameters OK 14:39:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:13 Set A/D data flow result=40 14:39:13 Set A/D channel type result=40 14:39:13 Set A/D encoding result=40 14:39:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:13 Set channel filter=0.000000e+000 result=40 14:39:13 Config A/D Result=40 14:39:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:13 Get A/D filter: -9.255963e+061 result=40 14:39:13 Get A/D value=-858993460 result=40 14:39:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:39:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:39:13 Aux= 14:39:13 Message to Camera, serial 109169 queued 14:39:49 Received message from Master: op=PointingHead serial=109181 14:39:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:39:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:39:49 Point started: ret=0 14:39:49 point_skyscan result=0 14:39:50 Check angles 14:39:50 SkyScan query 14:39:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:39:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:39:51 Message to Master queued w/err=0: serial=109181 error=0 14:39:56 Received message from Master: op=Filter serial=109182 14:39:56 Color wheel filter change from 0 to 0 14:39:56 FLIGetFilterPos err=0 currentPosition=0 14:39:56 FLIGetStepsRemaining err=0 RemainingSteps=0 14:39:56 Filter is already there-color wheel unchanged 14:39:56 Received message from Master: op=Shutter serial=109183 14:39:56 Shutter LASER close 14:39:56 Received message from Camera: op=State serial=109185 14:39:56 GetSingleValue result=40 Value=cccccccc 14:39:56 SkyScan query 14:39:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:39:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:56 Parameters OK 14:39:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:56 Set A/D data flow result=40 14:39:56 Set A/D channel type result=40 14:39:56 Set A/D encoding result=40 14:39:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:56 Set channel filter=0.000000e+000 result=40 14:39:56 Config A/D Result=40 14:39:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:56 Get A/D filter: -9.255963e+061 result=40 14:39:56 Get A/D value=-858993460 result=40 14:39:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:56 Parameters OK 14:39:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:56 Set A/D data flow result=40 14:39:56 Set A/D channel type result=40 14:39:56 Set A/D encoding result=40 14:39:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:56 Set channel filter=0.000000e+000 result=40 14:39:56 Config A/D Result=40 14:39:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:56 Get A/D filter: -9.255963e+061 result=40 14:39:56 Get A/D value=-858993460 result=40 14:39:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:39:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:39:56 Aux= 14:39:56 Message to Camera, serial 109185 queued 14:40:33 Received message from Master: op=PointingHead serial=109198 14:40:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:40:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:40:34 Point started: ret=0 14:40:34 point_skyscan result=0 14:40:34 Check angles 14:40:34 SkyScan query 14:40:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:40:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:40:35 Message to Master queued w/err=0: serial=109198 error=0 14:40:40 Received message from Master: op=Filter serial=109199 14:40:40 Color wheel filter change from 0 to 0 14:40:40 FLIGetFilterPos err=0 currentPosition=0 14:40:40 FLIGetStepsRemaining err=0 RemainingSteps=0 14:40:40 Filter is already there-color wheel unchanged 14:40:40 Received message from Master: op=Shutter serial=109200 14:40:40 Shutter LASER close 14:40:40 Received message from Camera: op=State serial=109202 14:40:40 GetSingleValue result=40 Value=cccccccc 14:40:40 SkyScan query 14:40:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:40:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:41 Parameters OK 14:40:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:41 Set A/D data flow result=40 14:40:41 Set A/D channel type result=40 14:40:41 Set A/D encoding result=40 14:40:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:41 Set channel filter=0.000000e+000 result=40 14:40:41 Config A/D Result=40 14:40:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:41 Get A/D filter: -9.255963e+061 result=40 14:40:41 Get A/D value=-858993460 result=40 14:40:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:41 Parameters OK 14:40:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:41 Set A/D data flow result=40 14:40:41 Set A/D channel type result=40 14:40:41 Set A/D encoding result=40 14:40:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:41 Set channel filter=0.000000e+000 result=40 14:40:41 Config A/D Result=40 14:40:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:41 Get A/D filter: -9.255963e+061 result=40 14:40:41 Get A/D value=-858993460 result=40 14:40:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:40:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:40:41 Aux= 14:40:41 Message to Camera, serial 109202 queued 14:41:18 Received message from Master: op=PointingHead serial=109215 14:41:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:41:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:41:18 Point started: ret=0 14:41:18 point_skyscan result=0 14:41:19 Check angles 14:41:19 SkyScan query 14:41:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:41:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:41:19 Message to Master queued w/err=0: serial=109215 error=0 14:41:24 Received message from Master: op=Filter serial=109216 14:41:24 Color wheel filter change from 0 to 0 14:41:24 FLIGetFilterPos err=0 currentPosition=0 14:41:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:41:24 Filter is already there-color wheel unchanged 14:41:24 Received message from Master: op=Shutter serial=109217 14:41:24 Shutter LASER close 14:41:24 Received message from Camera: op=State serial=109219 14:41:24 GetSingleValue result=40 Value=cccccccc 14:41:24 SkyScan query 14:41:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:41:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:25 Parameters OK 14:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:25 Set A/D data flow result=40 14:41:25 Set A/D channel type result=40 14:41:25 Set A/D encoding result=40 14:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:25 Set channel filter=0.000000e+000 result=40 14:41:25 Config A/D Result=40 14:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:25 Get A/D filter: -9.255963e+061 result=40 14:41:25 Get A/D value=-858993460 result=40 14:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:25 Parameters OK 14:41:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:25 Set A/D data flow result=40 14:41:25 Set A/D channel type result=40 14:41:25 Set A/D encoding result=40 14:41:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:25 Set channel filter=0.000000e+000 result=40 14:41:25 Config A/D Result=40 14:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:25 Get A/D filter: -9.255963e+061 result=40 14:41:25 Get A/D value=-858993460 result=40 14:41:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:41:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:41:25 Aux= 14:41:25 Message to Camera, serial 109219 queued 14:42:02 Received message from Master: op=PointingHead serial=109232 14:42:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:42:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:42:02 Point started: ret=0 14:42:02 point_skyscan result=0 14:42:03 Check angles 14:42:03 SkyScan query 14:42:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.19<-13546 Statuses=0008 0009 14:42:04 Msec=0 True Az=112.995 Ze=-23.19 Az status=0008 Ze status=0009 14:42:04 Check angles 14:42:04 SkyScan query 14:42:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 14:42:04 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 14:42:05 Check angles 14:42:05 SkyScan query 14:42:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.46<-16364 Statuses=0008 0009 14:42:05 Msec=1500 True Az=112.995 Ze=-65.46 Az status=0008 Ze status=0009 14:42:05 Check angles 14:42:05 SkyScan query 14:42:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.91<-17794 Statuses=0008 0009 14:42:06 Msec=2250 True Az=112.995 Ze=-86.91 Az status=0008 Ze status=0009 14:42:06 Check angles 14:42:06 SkyScan query 14:42:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.88<-19192 Statuses=0008 0009 14:42:07 Msec=3000 True Az=112.995 Ze=-107.88 Az status=0008 Ze status=0009 14:42:07 Check angles 14:42:07 SkyScan query 14:42:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.805<-20587 Statuses=0008 0009 14:42:07 Msec=3750 True Az=112.995 Ze=-128.805 Az status=0008 Ze status=0009 14:42:08 Check angles 14:42:08 SkyScan query 14:42:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.195<-22013 Statuses=0008 0009 14:42:08 Msec=4500 True Az=112.995 Ze=-150.195 Az status=0008 Ze status=0009 14:42:08 Check angles 14:42:08 SkyScan query 14:42:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 14:42:09 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 14:42:09 Check angles 14:42:09 SkyScan query 14:42:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:42:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:42:10 Message to Master queued w/err=0: serial=109232 error=0 14:42:15 Received message from Master: op=Filter serial=109233 14:42:15 Color wheel filter change from 0 to 0 14:42:15 FLIGetFilterPos err=0 currentPosition=0 14:42:15 FLIGetStepsRemaining err=0 RemainingSteps=0 14:42:15 Filter is already there-color wheel unchanged 14:42:15 Received message from Master: op=Shutter serial=109234 14:42:15 Shutter LASER open 14:42:15 Received message from Camera: op=State serial=109236 14:42:15 GetSingleValue result=40 Value=cccccccc 14:42:15 SkyScan query 14:42:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:42:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:16 Parameters OK 14:42:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:16 Set A/D data flow result=40 14:42:16 Set A/D channel type result=40 14:42:16 Set A/D encoding result=40 14:42:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:16 Set channel filter=0.000000e+000 result=40 14:42:16 Config A/D Result=40 14:42:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:16 Get A/D filter: -9.255963e+061 result=40 14:42:16 Get A/D value=-858993460 result=40 14:42:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:16 Parameters OK 14:42:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:16 Set A/D data flow result=40 14:42:16 Set A/D channel type result=40 14:42:16 Set A/D encoding result=40 14:42:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:16 Set channel filter=0.000000e+000 result=40 14:42:16 Config A/D Result=40 14:42:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:16 Get A/D filter: -9.255963e+061 result=40 14:42:16 Get A/D value=-858993460 result=40 14:42:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:42:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:42:16 Aux= 14:42:16 Message to Camera, serial 109236 queued 14:42:24 Received message from Master: op=Shutter serial=109246 14:42:24 Shutter LASER close 14:42:25 Received message from Master: op=PointingHead serial=109250 14:42:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:42:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:42:25 Point started: ret=0 14:42:25 point_skyscan result=0 14:42:26 Check angles 14:42:26 SkyScan query 14:42:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.295<-21553 Statuses=0008 0009 14:42:26 Msec=0 True Az=112.995 Ze=-143.295 Az status=0008 Ze status=0009 14:42:27 Check angles 14:42:27 SkyScan query 14:42:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.34<-20156 Statuses=0008 0009 14:42:27 Msec=750 True Az=112.995 Ze=-122.34 Az status=0008 Ze status=0009 14:42:27 Check angles 14:42:27 SkyScan query 14:42:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 14:42:28 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 14:42:28 Check angles 14:42:28 SkyScan query 14:42:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 14:42:29 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 14:42:29 Check angles 14:42:29 SkyScan query 14:42:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.545<-15903 Statuses=0008 0009 14:42:29 Msec=3000 True Az=112.995 Ze=-58.545 Az status=0008 Ze status=0009 14:42:30 Check angles 14:42:30 SkyScan query 14:42:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.605<-14507 Statuses=0008 0009 14:42:30 Msec=3750 True Az=112.995 Ze=-37.605 Az status=0008 Ze status=0009 14:42:30 Check angles 14:42:30 SkyScan query 14:42:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.65<-13110 Statuses=0008 0009 14:42:31 Msec=4500 True Az=112.995 Ze=-16.65 Az status=0008 Ze status=0009 14:42:31 Check angles 14:42:31 SkyScan query 14:42:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.545<-11697 Statuses=0008 0009 14:42:32 Msec=5250 True Az=112.995 Ze=4.545 Az status=0008 Ze status=0009 14:42:32 Check angles 14:42:32 SkyScan query 14:42:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:42:32 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:42:32 Message to Master queued w/err=0: serial=109250 error=0 14:42:37 Received message from Master: op=Filter serial=109251 14:42:37 Color wheel filter change from 0 to 0 14:42:37 FLIGetFilterPos err=0 currentPosition=0 14:42:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:42:37 Filter is already there-color wheel unchanged 14:42:38 Received message from Master: op=Shutter serial=109252 14:42:38 Shutter LASER close 14:42:38 Received message from Camera: op=State serial=109254 14:42:38 GetSingleValue result=40 Value=cccccccc 14:42:38 SkyScan query 14:42:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:42:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:38 Parameters OK 14:42:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:38 Set A/D data flow result=40 14:42:38 Set A/D channel type result=40 14:42:38 Set A/D encoding result=40 14:42:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:38 Set channel filter=0.000000e+000 result=40 14:42:38 Config A/D Result=40 14:42:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:38 Get A/D filter: -9.255963e+061 result=40 14:42:38 Get A/D value=-858993460 result=40 14:42:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:38 Parameters OK 14:42:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:38 Set A/D data flow result=40 14:42:38 Set A/D channel type result=40 14:42:38 Set A/D encoding result=40 14:42:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:38 Set channel filter=0.000000e+000 result=40 14:42:38 Config A/D Result=40 14:42:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:38 Get A/D filter: -9.255963e+061 result=40 14:42:38 Get A/D value=-858993460 result=40 14:42:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:42:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:42:38 Aux= 14:42:38 Message to Camera, serial 109254 queued 14:43:15 Received message from Master: op=PointingHead serial=109267 14:43:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:43:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:43:15 Point started: ret=0 14:43:15 point_skyscan result=0 14:43:16 Check angles 14:43:16 SkyScan query 14:43:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:43:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:43:17 Message to Master queued w/err=0: serial=109267 error=0 14:43:22 Received message from Master: op=Filter serial=109268 14:43:22 Color wheel filter change from 0 to 0 14:43:22 FLIGetFilterPos err=0 currentPosition=0 14:43:22 FLIGetStepsRemaining err=0 RemainingSteps=0 14:43:22 Filter is already there-color wheel unchanged 14:43:22 Received message from Master: op=Shutter serial=109269 14:43:22 Shutter LASER close 14:43:22 Received message from Camera: op=State serial=109271 14:43:22 GetSingleValue result=40 Value=cccccccc 14:43:22 SkyScan query 14:43:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:43:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:23 Parameters OK 14:43:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:23 Set A/D data flow result=40 14:43:23 Set A/D channel type result=40 14:43:23 Set A/D encoding result=40 14:43:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:23 Set channel filter=0.000000e+000 result=40 14:43:23 Config A/D Result=40 14:43:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:23 Get A/D filter: -9.255963e+061 result=40 14:43:23 Get A/D value=-858993460 result=40 14:43:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:23 Parameters OK 14:43:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:23 Set A/D data flow result=40 14:43:23 Set A/D channel type result=40 14:43:23 Set A/D encoding result=40 14:43:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:23 Set channel filter=0.000000e+000 result=40 14:43:23 Config A/D Result=40 14:43:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:23 Get A/D filter: -9.255963e+061 result=40 14:43:23 Get A/D value=-858993460 result=40 14:43:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:43:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:43:23 Aux= 14:43:23 Message to Camera, serial 109271 queued [UTC 2019-3-4 14:43:50] 14:43:59 Received message from Master: op=PointingHead serial=109284 14:43:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:43:59 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:44:00 Point started: ret=0 14:44:00 point_skyscan result=0 14:44:01 Check angles 14:44:01 SkyScan query 14:44:01 SkyScan query done: ret=0 az=135.84<-9056 ze=-6.51<-12434 Statuses=0009 0008 14:44:01 Msec=0 True Az=135.84 Ze=-6.51 Az status=0009 Ze status=0008 14:44:01 Check angles 14:44:01 SkyScan query 14:44:02 SkyScan query done: ret=0 az=153.72<-10248 ze=-6.495<-12433 Statuses=0009 0008 14:44:02 Msec=750 True Az=153.72 Ze=-6.495 Az status=0009 Ze status=0008 14:44:02 Check angles 14:44:02 SkyScan query 14:44:03 SkyScan query done: ret=0 az=171.15<-11410 ze=-6.495<-12433 Statuses=0009 0008 14:44:03 Msec=1500 True Az=171.15 Ze=-6.495 Az status=0009 Ze status=0008 14:44:03 Check angles 14:44:03 SkyScan query 14:44:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:44:03 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:44:03 Message to Master queued w/err=0: serial=109284 error=0 14:44:08 Received message from Master: op=Filter serial=109285 14:44:08 Color wheel filter change from 0 to 0 14:44:08 FLIGetFilterPos err=0 currentPosition=0 14:44:08 FLIGetStepsRemaining err=0 RemainingSteps=0 14:44:08 Filter is already there-color wheel unchanged 14:44:09 Received message from Master: op=Shutter serial=109286 14:44:09 Shutter LASER close 14:44:09 Received message from Camera: op=State serial=109288 14:44:09 GetSingleValue result=40 Value=cccccccc 14:44:09 SkyScan query 14:44:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:44:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:09 Parameters OK 14:44:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:09 Set A/D data flow result=40 14:44:09 Set A/D channel type result=40 14:44:09 Set A/D encoding result=40 14:44:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:09 Set channel filter=0.000000e+000 result=40 14:44:09 Config A/D Result=40 14:44:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:09 Get A/D filter: -9.255963e+061 result=40 14:44:09 Get A/D value=-858993460 result=40 14:44:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:09 Parameters OK 14:44:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:09 Set A/D data flow result=40 14:44:09 Set A/D channel type result=40 14:44:09 Set A/D encoding result=40 14:44:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:09 Set channel filter=0.000000e+000 result=40 14:44:09 Config A/D Result=40 14:44:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:09 Get A/D filter: -9.255963e+061 result=40 14:44:09 Get A/D value=-858993460 result=40 14:44:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:44:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:44:09 Aux= 14:44:09 Message to Camera, serial 109288 queued 14:44:46 Received message from Master: op=PointingHead serial=109301 14:44:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:44:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:44:46 Point started: ret=0 14:44:46 point_skyscan result=0 14:44:47 Check angles 14:44:47 SkyScan query 14:44:48 SkyScan query done: ret=0 az=153.24<-10216 ze=6.51<-11566 Statuses=0009 0008 14:44:48 Msec=0 True Az=153.24 Ze=6.51 Az status=0009 Ze status=0008 14:44:48 Check angles 14:44:48 SkyScan query 14:44:48 SkyScan query done: ret=0 az=135.72<-9048 ze=6.495<-11567 Statuses=0009 0008 14:44:48 Msec=750 True Az=135.72 Ze=6.495 Az status=0009 Ze status=0008 14:44:49 Check angles 14:44:49 SkyScan query 14:44:49 SkyScan query done: ret=0 az=118.245<-7883 ze=6.495<-11567 Statuses=0009 0008 14:44:49 Msec=1500 True Az=118.245 Ze=6.495 Az status=0009 Ze status=0008 14:44:49 Check angles 14:44:49 SkyScan query 14:44:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:44:50 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:44:50 Message to Master queued w/err=0: serial=109301 error=0 14:44:55 Received message from Master: op=Filter serial=109302 14:44:55 Color wheel filter change from 0 to 0 14:44:55 FLIGetFilterPos err=0 currentPosition=0 14:44:55 FLIGetStepsRemaining err=0 RemainingSteps=0 14:44:55 Filter is already there-color wheel unchanged 14:44:55 Received message from Master: op=Shutter serial=109303 14:44:55 Shutter LASER close 14:44:55 Received message from Camera: op=State serial=109305 14:44:55 GetSingleValue result=40 Value=cccccccc 14:44:55 SkyScan query 14:44:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:44:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:56 Parameters OK 14:44:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:56 Set A/D data flow result=40 14:44:56 Set A/D channel type result=40 14:44:56 Set A/D encoding result=40 14:44:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:56 Set channel filter=0.000000e+000 result=40 14:44:56 Config A/D Result=40 14:44:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:56 Get A/D filter: -9.255963e+061 result=40 14:44:56 Get A/D value=-858993460 result=40 14:44:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:56 Parameters OK 14:44:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:56 Set A/D data flow result=40 14:44:56 Set A/D channel type result=40 14:44:56 Set A/D encoding result=40 14:44:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:56 Set channel filter=0.000000e+000 result=40 14:44:56 Config A/D Result=40 14:44:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:56 Get A/D filter: -9.255963e+061 result=40 14:44:56 Get A/D value=-858993460 result=40 14:44:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:44:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:44:56 Aux= 14:44:56 Message to Camera, serial 109305 queued 14:45:33 Received message from Master: op=PointingHead serial=109318 14:45:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:45:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:45:33 Point started: ret=0 14:45:33 point_skyscan result=0 14:45:34 Check angles 14:45:34 SkyScan query 14:45:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.835<-13589 Statuses=0008 0009 14:45:34 Msec=0 True Az=112.995 Ze=-23.835 Az status=0008 Ze status=0009 14:45:34 Check angles 14:45:34 SkyScan query 14:45:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.225<-15015 Statuses=0008 0009 14:45:35 Msec=750 True Az=112.995 Ze=-45.225 Az status=0008 Ze status=0009 14:45:35 Check angles 14:45:35 SkyScan query 14:45:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.225<-16415 Statuses=0008 0009 14:45:36 Msec=1500 True Az=112.995 Ze=-66.225 Az status=0008 Ze status=0009 14:45:36 Check angles 14:45:36 SkyScan query 14:45:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.195<-17813 Statuses=0008 0009 14:45:36 Msec=2250 True Az=112.995 Ze=-87.195 Az status=0008 Ze status=0009 14:45:37 Check angles 14:45:37 SkyScan query 14:45:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.15<-19210 Statuses=0008 0009 14:45:37 Msec=3000 True Az=112.995 Ze=-108.15 Az status=0008 Ze status=0009 14:45:37 Check angles 14:45:37 SkyScan query 14:45:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.075<-20605 Statuses=0008 0009 14:45:38 Msec=3750 True Az=112.995 Ze=-129.075 Az status=0008 Ze status=0009 14:45:38 Check angles 14:45:38 SkyScan query 14:45:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.03<-22002 Statuses=0008 0009 14:45:39 Msec=4500 True Az=112.995 Ze=-150.03 Az status=0008 Ze status=0009 14:45:39 Check angles 14:45:39 SkyScan query 14:45:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.88<-23392 Statuses=0008 0009 14:45:39 Msec=5250 True Az=112.995 Ze=-170.88 Az status=0008 Ze status=0009 14:45:40 Check angles 14:45:40 SkyScan query 14:45:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:45:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:45:40 Message to Master queued w/err=0: serial=109318 error=0 14:45:45 Received message from Master: op=Filter serial=109319 14:45:45 Color wheel filter change from 0 to 0 14:45:45 FLIGetFilterPos err=0 currentPosition=0 14:45:45 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:45 Filter is already there-color wheel unchanged 14:45:45 Received message from Master: op=Shutter serial=109320 14:45:45 Shutter LASER open 14:45:46 Received message from Camera: op=State serial=109322 14:45:46 GetSingleValue result=40 Value=cccccccc 14:45:46 SkyScan query 14:45:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:45:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:46 Parameters OK 14:45:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:46 Set A/D data flow result=40 14:45:46 Set A/D channel type result=40 14:45:46 Set A/D encoding result=40 14:45:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:46 Set channel filter=0.000000e+000 result=40 14:45:46 Config A/D Result=40 14:45:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:46 Get A/D filter: -9.255963e+061 result=40 14:45:46 Get A/D value=-858993460 result=40 14:45:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:46 Parameters OK 14:45:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:46 Set A/D data flow result=40 14:45:46 Set A/D channel type result=40 14:45:46 Set A/D encoding result=40 14:45:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:46 Set channel filter=0.000000e+000 result=40 14:45:46 Config A/D Result=40 14:45:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:46 Get A/D filter: -9.255963e+061 result=40 14:45:46 Get A/D value=-858993460 result=40 14:45:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:46 Aux= 14:45:46 Message to Camera, serial 109322 queued 14:45:55 Received message from Master: op=Shutter serial=109332 14:45:55 Shutter LASER close 14:45:55 Received message from Master: op=PointingHead serial=109336 14:45:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:45:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:45:55 Point started: ret=0 14:45:55 point_skyscan result=0 14:45:56 Check angles 14:45:56 SkyScan query 14:45:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.31<-21554 Statuses=0008 0009 14:45:57 Msec=0 True Az=112.995 Ze=-143.31 Az status=0008 Ze status=0009 14:45:57 Check angles 14:45:57 SkyScan query 14:45:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.49<-20166 Statuses=0008 0009 14:45:57 Msec=750 True Az=112.995 Ze=-122.49 Az status=0008 Ze status=0009 14:45:58 Check angles 14:45:58 SkyScan query 14:45:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.535<-18769 Statuses=0008 0009 14:45:58 Msec=1500 True Az=112.995 Ze=-101.535 Az status=0008 Ze status=0009 14:45:58 Check angles 14:45:58 SkyScan query 14:45:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.565<-17371 Statuses=0008 0009 14:45:59 Msec=2250 True Az=112.995 Ze=-80.565 Az status=0008 Ze status=0009 14:45:59 Check angles 14:45:59 SkyScan query 14:46:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.64<-15976 Statuses=0008 0009 14:46:00 Msec=3000 True Az=112.995 Ze=-59.64 Az status=0008 Ze status=0009 14:46:00 Check angles 14:46:00 SkyScan query 14:46:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.655<-14577 Statuses=0008 0009 14:46:00 Msec=3750 True Az=112.995 Ze=-38.655 Az status=0008 Ze status=0009 14:46:01 Check angles 14:46:01 SkyScan query 14:46:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.715<-13181 Statuses=0008 0009 14:46:01 Msec=4500 True Az=112.995 Ze=-17.715 Az status=0008 Ze status=0009 14:46:01 Check angles 14:46:01 SkyScan query 14:46:02 SkyScan query done: ret=0 az=112.98<-7532 ze=3.27<-11782 Statuses=0008 0009 14:46:02 Msec=5250 True Az=112.98 Ze=3.27 Az status=0008 Ze status=0009 14:46:02 Check angles 14:46:02 SkyScan query 14:46:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:46:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:46:03 Message to Master queued w/err=0: serial=109336 error=0 14:46:08 Received message from Master: op=Filter serial=109337 14:46:08 Color wheel filter change from 0 to 0 14:46:08 FLIGetFilterPos err=0 currentPosition=0 14:46:08 FLIGetStepsRemaining err=0 RemainingSteps=0 14:46:08 Filter is already there-color wheel unchanged 14:46:08 Received message from Master: op=Shutter serial=109338 14:46:08 Shutter LASER close 14:46:08 Received message from Camera: op=State serial=109340 14:46:08 GetSingleValue result=40 Value=cccccccc 14:46:08 SkyScan query 14:46:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:46:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:09 Parameters OK 14:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:09 Set A/D data flow result=40 14:46:09 Set A/D channel type result=40 14:46:09 Set A/D encoding result=40 14:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:09 Set channel filter=0.000000e+000 result=40 14:46:09 Config A/D Result=40 14:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:09 Get A/D filter: -9.255963e+061 result=40 14:46:09 Get A/D value=-858993460 result=40 14:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:09 Parameters OK 14:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:09 Set A/D data flow result=40 14:46:09 Set A/D channel type result=40 14:46:09 Set A/D encoding result=40 14:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:09 Set channel filter=0.000000e+000 result=40 14:46:09 Config A/D Result=40 14:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:09 Get A/D filter: -9.255963e+061 result=40 14:46:09 Get A/D value=-858993460 result=40 14:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:46:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:46:09 Aux= 14:46:09 Message to Camera, serial 109340 queued 14:46:45 Received message from Master: op=PointingHead serial=109353 14:46:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:46:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:46:46 Point started: ret=0 14:46:46 point_skyscan result=0 14:46:47 Check angles 14:46:47 SkyScan query 14:46:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:46:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:46:47 Message to Master queued w/err=0: serial=109353 error=0 14:46:52 Received message from Master: op=Filter serial=109354 14:46:52 Color wheel filter change from 0 to 0 14:46:52 FLIGetFilterPos err=0 currentPosition=0 14:46:52 FLIGetStepsRemaining err=0 RemainingSteps=0 14:46:52 Filter is already there-color wheel unchanged 14:46:52 Received message from Master: op=Shutter serial=109355 14:46:52 Shutter LASER close 14:46:52 Received message from Camera: op=State serial=109357 14:46:52 GetSingleValue result=40 Value=cccccccc 14:46:52 SkyScan query 14:46:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:46:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:53 Parameters OK 14:46:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:53 Set A/D data flow result=40 14:46:53 Set A/D channel type result=40 14:46:53 Set A/D encoding result=40 14:46:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:53 Set channel filter=0.000000e+000 result=40 14:46:53 Config A/D Result=40 14:46:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:53 Get A/D filter: -9.255963e+061 result=40 14:46:53 Get A/D value=-858993460 result=40 14:46:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:53 Parameters OK 14:46:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:53 Set A/D data flow result=40 14:46:53 Set A/D channel type result=40 14:46:53 Set A/D encoding result=40 14:46:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:53 Set channel filter=0.000000e+000 result=40 14:46:53 Config A/D Result=40 14:46:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:53 Get A/D filter: -9.255963e+061 result=40 14:46:53 Get A/D value=-858993460 result=40 14:46:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:46:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:46:53 Aux= 14:46:53 Message to Camera, serial 109357 queued 14:47:30 Received message from Master: op=PointingHead serial=109370 14:47:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:47:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:47:30 Point started: ret=0 14:47:30 point_skyscan result=0 14:47:31 Check angles 14:47:31 SkyScan query 14:47:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:47:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:47:31 Message to Master queued w/err=0: serial=109370 error=0 14:47:36 Received message from Master: op=Filter serial=109371 14:47:36 Color wheel filter change from 0 to 0 14:47:36 FLIGetFilterPos err=0 currentPosition=0 14:47:36 FLIGetStepsRemaining err=0 RemainingSteps=0 14:47:36 Filter is already there-color wheel unchanged 14:47:37 Received message from Master: op=Shutter serial=109372 14:47:37 Shutter LASER close 14:47:37 Received message from Camera: op=State serial=109374 14:47:37 GetSingleValue result=40 Value=cccccccc 14:47:37 SkyScan query 14:47:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:47:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:37 Parameters OK 14:47:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:37 Set A/D data flow result=40 14:47:37 Set A/D channel type result=40 14:47:37 Set A/D encoding result=40 14:47:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:37 Set channel filter=0.000000e+000 result=40 14:47:37 Config A/D Result=40 14:47:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:37 Get A/D filter: -9.255963e+061 result=40 14:47:37 Get A/D value=-858993460 result=40 14:47:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:37 Parameters OK 14:47:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:37 Set A/D data flow result=40 14:47:37 Set A/D channel type result=40 14:47:37 Set A/D encoding result=40 14:47:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:37 Set channel filter=0.000000e+000 result=40 14:47:37 Config A/D Result=40 14:47:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:37 Get A/D filter: -9.255963e+061 result=40 14:47:37 Get A/D value=-858993460 result=40 14:47:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:47:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:47:37 Aux= 14:47:37 Message to Camera, serial 109374 queued 14:48:14 Received message from Master: op=PointingHead serial=109387 14:48:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:48:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:48:14 Point started: ret=0 14:48:14 point_skyscan result=0 14:48:15 Check angles 14:48:15 SkyScan query 14:48:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:48:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:48:16 Message to Master queued w/err=0: serial=109387 error=0 14:48:21 Received message from Master: op=Filter serial=109388 14:48:21 Color wheel filter change from 0 to 0 14:48:21 FLIGetFilterPos err=0 currentPosition=0 14:48:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:48:21 Filter is already there-color wheel unchanged 14:48:21 Received message from Master: op=Shutter serial=109389 14:48:21 Shutter LASER close 14:48:21 Received message from Camera: op=State serial=109391 14:48:21 GetSingleValue result=40 Value=cccccccc 14:48:21 SkyScan query 14:48:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:48:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:22 Parameters OK 14:48:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:22 Set A/D data flow result=40 14:48:22 Set A/D channel type result=40 14:48:22 Set A/D encoding result=40 14:48:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:22 Set channel filter=0.000000e+000 result=40 14:48:22 Config A/D Result=40 14:48:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:22 Get A/D filter: -9.255963e+061 result=40 14:48:22 Get A/D value=-858993460 result=40 14:48:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:22 Parameters OK 14:48:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:22 Set A/D data flow result=40 14:48:22 Set A/D channel type result=40 14:48:22 Set A/D encoding result=40 14:48:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:22 Set channel filter=0.000000e+000 result=40 14:48:22 Config A/D Result=40 14:48:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:22 Get A/D filter: -9.255963e+061 result=40 14:48:22 Get A/D value=-858993460 result=40 14:48:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:48:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:48:22 Aux= 14:48:22 Message to Camera, serial 109391 queued 14:48:58 Received message from Master: op=PointingHead serial=109404 14:48:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:48:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:48:59 Point started: ret=0 14:48:59 point_skyscan result=0 14:48:59 Check angles 14:48:59 SkyScan query 14:49:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 14:49:00 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 14:49:00 Check angles 14:49:00 SkyScan query 14:49:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.22<-14948 Statuses=0008 0009 14:49:01 Msec=750 True Az=112.995 Ze=-44.22 Az status=0008 Ze status=0009 14:49:01 Check angles 14:49:01 SkyScan query 14:49:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.13<-16342 Statuses=0008 0009 14:49:02 Msec=1500 True Az=112.995 Ze=-65.13 Az status=0008 Ze status=0009 14:49:02 Check angles 14:49:02 SkyScan query 14:49:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.1<-17740 Statuses=0008 0009 14:49:02 Msec=2250 True Az=112.995 Ze=-86.1 Az status=0008 Ze status=0009 14:49:02 Check angles 14:49:02 SkyScan query 14:49:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.025<-19135 Statuses=0008 0009 14:49:03 Msec=3000 True Az=112.995 Ze=-107.025 Az status=0008 Ze status=0009 14:49:03 Check angles 14:49:03 SkyScan query 14:49:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.995<-20533 Statuses=0008 0009 14:49:04 Msec=3750 True Az=112.995 Ze=-127.995 Az status=0008 Ze status=0009 14:49:04 Check angles 14:49:04 SkyScan query 14:49:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.95<-21930 Statuses=0008 0009 14:49:05 Msec=4500 True Az=112.995 Ze=-148.95 Az status=0008 Ze status=0009 14:49:05 Check angles 14:49:05 SkyScan query 14:49:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.89<-23326 Statuses=0008 0009 14:49:05 Msec=5250 True Az=112.995 Ze=-169.89 Az status=0008 Ze status=0009 14:49:05 Check angles 14:49:05 SkyScan query 14:49:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:49:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:49:06 Message to Master queued w/err=0: serial=109404 error=0 14:49:11 Received message from Master: op=Filter serial=109405 14:49:11 Color wheel filter change from 0 to 0 14:49:11 FLIGetFilterPos err=0 currentPosition=0 14:49:11 FLIGetStepsRemaining err=0 RemainingSteps=0 14:49:11 Filter is already there-color wheel unchanged 14:49:11 Received message from Master: op=Shutter serial=109406 14:49:11 Shutter LASER open 14:49:11 Received message from Camera: op=State serial=109408 14:49:11 GetSingleValue result=40 Value=cccccccc 14:49:11 SkyScan query 14:49:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:49:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:12 Parameters OK 14:49:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:12 Set A/D data flow result=40 14:49:12 Set A/D channel type result=40 14:49:12 Set A/D encoding result=40 14:49:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:12 Set channel filter=0.000000e+000 result=40 14:49:12 Config A/D Result=40 14:49:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:12 Get A/D filter: -9.255963e+061 result=40 14:49:12 Get A/D value=-858993460 result=40 14:49:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:12 Parameters OK 14:49:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:12 Set A/D data flow result=40 14:49:12 Set A/D channel type result=40 14:49:12 Set A/D encoding result=40 14:49:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:12 Set channel filter=0.000000e+000 result=40 14:49:12 Config A/D Result=40 14:49:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:12 Get A/D filter: -9.255963e+061 result=40 14:49:12 Get A/D value=-858993460 result=40 14:49:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:49:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:49:12 Aux= 14:49:12 Message to Camera, serial 109408 queued 14:49:20 Received message from Master: op=Shutter serial=109418 14:49:20 Shutter LASER close 14:49:21 Received message from Master: op=PointingHead serial=109422 14:49:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:49:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:49:21 Point started: ret=0 14:49:21 point_skyscan result=0 14:49:22 Check angles 14:49:22 SkyScan query 14:49:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 14:49:23 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 14:49:23 Check angles 14:49:23 SkyScan query 14:49:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 14:49:23 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 14:49:24 Check angles 14:49:24 SkyScan query 14:49:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.845<-18723 Statuses=0008 0009 14:49:24 Msec=1500 True Az=112.995 Ze=-100.845 Az status=0008 Ze status=0009 14:49:24 Check angles 14:49:24 SkyScan query 14:49:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.875<-17325 Statuses=0008 0009 14:49:25 Msec=2250 True Az=112.995 Ze=-79.875 Az status=0008 Ze status=0009 14:49:25 Check angles 14:49:25 SkyScan query 14:49:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.935<-15929 Statuses=0008 0009 14:49:26 Msec=3000 True Az=112.995 Ze=-58.935 Az status=0008 Ze status=0009 14:49:26 Check angles 14:49:26 SkyScan query 14:49:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.905<-14527 Statuses=0008 0009 14:49:26 Msec=3750 True Az=112.995 Ze=-37.905 Az status=0008 Ze status=0009 14:49:27 Check angles 14:49:27 SkyScan query 14:49:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.98<-13132 Statuses=0008 0009 14:49:27 Msec=4500 True Az=112.995 Ze=-16.98 Az status=0008 Ze status=0009 14:49:27 Check angles 14:49:27 SkyScan query 14:49:28 SkyScan query done: ret=0 az=112.995<-7533 ze=3.975<-11735 Statuses=0008 0009 14:49:28 Msec=5250 True Az=112.995 Ze=3.975 Az status=0008 Ze status=0009 14:49:28 Check angles 14:49:28 SkyScan query 14:49:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:49:29 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:49:29 Message to Master queued w/err=0: serial=109422 error=0 14:49:34 Received message from Master: op=Filter serial=109423 14:49:34 Color wheel filter change from 0 to 0 14:49:34 FLIGetFilterPos err=0 currentPosition=0 14:49:34 FLIGetStepsRemaining err=0 RemainingSteps=0 14:49:34 Filter is already there-color wheel unchanged 14:49:34 Received message from Master: op=Shutter serial=109424 14:49:34 Shutter LASER close 14:49:34 Received message from Camera: op=State serial=109426 14:49:34 GetSingleValue result=40 Value=cccccccc 14:49:34 SkyScan query 14:49:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:49:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:35 Parameters OK 14:49:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:35 Set A/D data flow result=40 14:49:35 Set A/D channel type result=40 14:49:35 Set A/D encoding result=40 14:49:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:35 Set channel filter=0.000000e+000 result=40 14:49:35 Config A/D Result=40 14:49:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:35 Get A/D filter: -9.255963e+061 result=40 14:49:35 Get A/D value=-858993460 result=40 14:49:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:35 Parameters OK 14:49:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:35 Set A/D data flow result=40 14:49:35 Set A/D channel type result=40 14:49:35 Set A/D encoding result=40 14:49:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:35 Set channel filter=0.000000e+000 result=40 14:49:35 Config A/D Result=40 14:49:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:35 Get A/D filter: -9.255963e+061 result=40 14:49:35 Get A/D value=-858993460 result=40 14:49:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:49:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:49:35 Aux= 14:49:35 Message to Camera, serial 109426 queued 14:50:11 Received message from Master: op=PointingHead serial=109439 14:50:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:50:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:50:12 Point started: ret=0 14:50:12 point_skyscan result=0 14:50:13 Check angles 14:50:13 SkyScan query 14:50:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:50:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:50:13 Message to Master queued w/err=0: serial=109439 error=0 14:50:18 Received message from Master: op=Filter serial=109440 14:50:18 Color wheel filter change from 0 to 0 14:50:18 FLIGetFilterPos err=0 currentPosition=0 14:50:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:50:18 Filter is already there-color wheel unchanged 14:50:18 Received message from Master: op=Shutter serial=109441 14:50:18 Shutter LASER close 14:50:18 Received message from Camera: op=State serial=109443 14:50:18 GetSingleValue result=40 Value=cccccccc 14:50:18 SkyScan query 14:50:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:50:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:19 Parameters OK 14:50:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:19 Set A/D data flow result=40 14:50:19 Set A/D channel type result=40 14:50:19 Set A/D encoding result=40 14:50:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:19 Set channel filter=0.000000e+000 result=40 14:50:19 Config A/D Result=40 14:50:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:19 Get A/D filter: -9.255963e+061 result=40 14:50:19 Get A/D value=-858993460 result=40 14:50:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:19 Parameters OK 14:50:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:19 Set A/D data flow result=40 14:50:19 Set A/D channel type result=40 14:50:19 Set A/D encoding result=40 14:50:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:19 Set channel filter=0.000000e+000 result=40 14:50:19 Config A/D Result=40 14:50:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:19 Get A/D filter: -9.255963e+061 result=40 14:50:19 Get A/D value=-858993460 result=40 14:50:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:50:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:50:19 Aux= 14:50:19 Message to Camera, serial 109443 queued 14:50:56 Received message from Master: op=PointingHead serial=109456 14:50:56 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:50:56 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:50:56 Point started: ret=0 14:50:56 point_skyscan result=0 14:50:57 Check angles 14:50:57 SkyScan query 14:50:57 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 14:50:57 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 14:50:58 Check angles 14:50:58 SkyScan query 14:50:58 SkyScan query done: ret=0 az=153.735<-10249 ze=-6.51<-12434 Statuses=0009 0008 14:50:58 Msec=750 True Az=153.735 Ze=-6.51 Az status=0009 Ze status=0008 14:50:58 Check angles 14:50:58 SkyScan query 14:50:59 SkyScan query done: ret=0 az=171.54<-11436 ze=-6.495<-12433 Statuses=0009 0008 14:50:59 Msec=1500 True Az=171.54 Ze=-6.495 Az status=0009 Ze status=0008 14:50:59 Check angles 14:50:59 SkyScan query 14:51:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:51:00 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:51:00 Message to Master queued w/err=0: serial=109456 error=0 14:51:05 Received message from Master: op=Filter serial=109457 14:51:05 Color wheel filter change from 0 to 0 14:51:05 FLIGetFilterPos err=0 currentPosition=0 14:51:05 FLIGetStepsRemaining err=0 RemainingSteps=0 14:51:05 Filter is already there-color wheel unchanged 14:51:05 Received message from Master: op=Shutter serial=109458 14:51:05 Shutter LASER close 14:51:05 Received message from Camera: op=State serial=109460 14:51:05 GetSingleValue result=40 Value=cccccccc 14:51:05 SkyScan query 14:51:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:51:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:05 Parameters OK 14:51:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:05 Set A/D data flow result=40 14:51:05 Set A/D channel type result=40 14:51:05 Set A/D encoding result=40 14:51:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:05 Set channel filter=0.000000e+000 result=40 14:51:05 Config A/D Result=40 14:51:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:05 Get A/D filter: -9.255963e+061 result=40 14:51:05 Get A/D value=-858993460 result=40 14:51:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:05 Parameters OK 14:51:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:05 Set A/D data flow result=40 14:51:05 Set A/D channel type result=40 14:51:05 Set A/D encoding result=40 14:51:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:05 Set channel filter=0.000000e+000 result=40 14:51:05 Config A/D Result=40 14:51:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:05 Get A/D filter: -9.255963e+061 result=40 14:51:05 Get A/D value=-858993460 result=40 14:51:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:51:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:51:05 Aux= 14:51:05 Message to Camera, serial 109460 queued 14:51:42 Received message from Master: op=PointingHead serial=109473 14:51:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:51:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:51:43 Point started: ret=0 14:51:43 point_skyscan result=0 14:51:43 Check angles 14:51:43 SkyScan query 14:51:44 SkyScan query done: ret=0 az=152.925<-10195 ze=6.51<-11566 Statuses=0009 0008 14:51:44 Msec=0 True Az=152.925 Ze=6.51 Az status=0009 Ze status=0008 14:51:44 Check angles 14:51:44 SkyScan query 14:51:45 SkyScan query done: ret=0 az=135.435<-9029 ze=6.495<-11567 Statuses=0009 0008 14:51:45 Msec=750 True Az=135.435 Ze=6.495 Az status=0009 Ze status=0008 14:51:45 Check angles 14:51:45 SkyScan query 14:51:46 SkyScan query done: ret=0 az=117.93<-7862 ze=6.495<-11567 Statuses=0009 0008 14:51:46 Msec=1500 True Az=117.93 Ze=6.495 Az status=0009 Ze status=0008 14:51:46 Check angles 14:51:46 SkyScan query 14:51:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:51:46 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:51:46 Message to Master queued w/err=0: serial=109473 error=0 14:51:51 Received message from Master: op=Filter serial=109474 14:51:51 Color wheel filter change from 0 to 0 14:51:51 FLIGetFilterPos err=0 currentPosition=0 14:51:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:51:51 Filter is already there-color wheel unchanged 14:51:51 Received message from Master: op=Shutter serial=109475 14:51:51 Shutter LASER close 14:51:52 Received message from Camera: op=State serial=109477 14:51:52 GetSingleValue result=40 Value=cccccccc 14:51:52 SkyScan query 14:51:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:51:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:52 Parameters OK 14:51:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:52 Set A/D data flow result=40 14:51:52 Set A/D channel type result=40 14:51:52 Set A/D encoding result=40 14:51:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:52 Set channel filter=0.000000e+000 result=40 14:51:52 Config A/D Result=40 14:51:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:52 Get A/D filter: -9.255963e+061 result=40 14:51:52 Get A/D value=-858993460 result=40 14:51:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:52 Parameters OK 14:51:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:52 Set A/D data flow result=40 14:51:52 Set A/D channel type result=40 14:51:52 Set A/D encoding result=40 14:51:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:52 Set channel filter=0.000000e+000 result=40 14:51:52 Config A/D Result=40 14:51:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:52 Get A/D filter: -9.255963e+061 result=40 14:51:52 Get A/D value=-858993460 result=40 14:51:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:51:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:51:52 Aux= 14:51:52 Message to Camera, serial 109477 queued 14:52:29 Received message from Master: op=PointingHead serial=109490 14:52:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:52:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:52:29 Point started: ret=0 14:52:29 point_skyscan result=0 14:52:30 Check angles 14:52:30 SkyScan query 14:52:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 14:52:31 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 14:52:31 Check angles 14:52:31 SkyScan query 14:52:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.64<-14976 Statuses=0008 0009 14:52:31 Msec=750 True Az=112.995 Ze=-44.64 Az status=0008 Ze status=0009 14:52:32 Check angles 14:52:32 SkyScan query 14:52:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.595<-16373 Statuses=0008 0009 14:52:32 Msec=1500 True Az=112.995 Ze=-65.595 Az status=0008 Ze status=0009 14:52:32 Check angles 14:52:32 SkyScan query 14:52:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.045<-17803 Statuses=0008 0009 14:52:33 Msec=2250 True Az=112.995 Ze=-87.045 Az status=0008 Ze status=0009 14:52:33 Check angles 14:52:33 SkyScan query 14:52:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.42<-19228 Statuses=0008 0009 14:52:34 Msec=3000 True Az=112.995 Ze=-108.42 Az status=0008 Ze status=0009 14:52:34 Check angles 14:52:34 SkyScan query 14:52:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.375<-20625 Statuses=0008 0009 14:52:34 Msec=3750 True Az=112.995 Ze=-129.375 Az status=0008 Ze status=0009 14:52:35 Check angles 14:52:35 SkyScan query 14:52:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.69<-22046 Statuses=0008 0009 14:52:35 Msec=4500 True Az=112.995 Ze=-150.69 Az status=0008 Ze status=0009 14:52:35 Check angles 14:52:35 SkyScan query 14:52:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.72<-23448 Statuses=0008 0009 14:52:36 Msec=5250 True Az=112.995 Ze=-171.72 Az status=0008 Ze status=0009 14:52:36 Check angles 14:52:36 SkyScan query 14:52:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:52:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:52:37 Message to Master queued w/err=0: serial=109490 error=0 14:52:42 Received message from Master: op=Filter serial=109491 14:52:42 Color wheel filter change from 0 to 0 14:52:42 FLIGetFilterPos err=0 currentPosition=0 14:52:42 FLIGetStepsRemaining err=0 RemainingSteps=0 14:52:42 Filter is already there-color wheel unchanged 14:52:42 Received message from Master: op=Shutter serial=109492 14:52:42 Shutter LASER open 14:52:42 Received message from Camera: op=State serial=109494 14:52:42 GetSingleValue result=40 Value=cccccccc 14:52:42 SkyScan query 14:52:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:52:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:43 Parameters OK 14:52:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:43 Set A/D data flow result=40 14:52:43 Set A/D channel type result=40 14:52:43 Set A/D encoding result=40 14:52:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:43 Set channel filter=0.000000e+000 result=40 14:52:43 Config A/D Result=40 14:52:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:43 Get A/D filter: -9.255963e+061 result=40 14:52:43 Get A/D value=-858993460 result=40 14:52:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:43 Parameters OK 14:52:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:43 Set A/D data flow result=40 14:52:43 Set A/D channel type result=40 14:52:43 Set A/D encoding result=40 14:52:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:43 Set channel filter=0.000000e+000 result=40 14:52:43 Config A/D Result=40 14:52:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:43 Get A/D filter: -9.255963e+061 result=40 14:52:43 Get A/D value=-858993460 result=40 14:52:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:52:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:52:43 Aux= 14:52:43 Message to Camera, serial 109494 queued 14:52:51 Received message from Master: op=Shutter serial=109504 14:52:51 Shutter LASER close 14:52:51 Received message from Master: op=PointingHead serial=109508 14:52:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:52:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:52:52 Point started: ret=0 14:52:52 point_skyscan result=0 14:52:53 Check angles 14:52:53 SkyScan query 14:52:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 14:52:53 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 14:52:53 Check angles 14:52:53 SkyScan query 14:52:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 14:52:54 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 14:52:54 Check angles 14:52:54 SkyScan query 14:52:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 14:52:55 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 14:52:55 Check angles 14:52:55 SkyScan query 14:52:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.175<-17345 Statuses=0008 0009 14:52:55 Msec=2250 True Az=112.995 Ze=-80.175 Az status=0008 Ze status=0009 14:52:56 Check angles 14:52:56 SkyScan query 14:52:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 14:52:56 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 14:52:56 Check angles 14:52:56 SkyScan query 14:52:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.74<-14516 Statuses=0008 0009 14:52:57 Msec=3750 True Az=112.995 Ze=-37.74 Az status=0008 Ze status=0009 14:52:57 Check angles 14:52:57 SkyScan query 14:52:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.8<-13120 Statuses=0008 0009 14:52:58 Msec=4500 True Az=112.995 Ze=-16.8 Az status=0008 Ze status=0009 14:52:58 Check angles 14:52:58 SkyScan query 14:52:58 SkyScan query done: ret=0 az=112.995<-7533 ze=4.44<-11704 Statuses=0008 0009 14:52:58 Msec=5250 True Az=112.995 Ze=4.44 Az status=0008 Ze status=0009 14:52:59 Check angles 14:52:59 SkyScan query 14:52:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:52:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:52:59 Message to Master queued w/err=0: serial=109508 error=0 14:53:04 Received message from Master: op=Filter serial=109509 14:53:04 Color wheel filter change from 0 to 0 14:53:04 FLIGetFilterPos err=0 currentPosition=0 14:53:04 FLIGetStepsRemaining err=0 RemainingSteps=0 14:53:04 Filter is already there-color wheel unchanged 14:53:04 Received message from Master: op=Shutter serial=109510 14:53:04 Shutter LASER close 14:53:05 Received message from Camera: op=State serial=109512 14:53:05 GetSingleValue result=40 Value=cccccccc 14:53:05 SkyScan query 14:53:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:53:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:05 Parameters OK 14:53:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:05 Set A/D data flow result=40 14:53:05 Set A/D channel type result=40 14:53:05 Set A/D encoding result=40 14:53:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:05 Set channel filter=0.000000e+000 result=40 14:53:05 Config A/D Result=40 14:53:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:05 Get A/D filter: -9.255963e+061 result=40 14:53:05 Get A/D value=-858993460 result=40 14:53:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:05 Parameters OK 14:53:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:05 Set A/D data flow result=40 14:53:05 Set A/D channel type result=40 14:53:05 Set A/D encoding result=40 14:53:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:05 Set channel filter=0.000000e+000 result=40 14:53:05 Config A/D Result=40 14:53:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:05 Get A/D filter: -9.255963e+061 result=40 14:53:05 Get A/D value=-858993460 result=40 14:53:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:53:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:53:05 Aux= 14:53:05 Message to Camera, serial 109512 queued 14:53:42 Received message from Master: op=PointingHead serial=109525 14:53:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:53:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:53:42 Point started: ret=0 14:53:42 point_skyscan result=0 14:53:43 Check angles 14:53:43 SkyScan query 14:53:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:53:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:53:44 Message to Master queued w/err=0: serial=109525 error=0 14:53:49 Received message from Master: op=Filter serial=109526 14:53:49 Color wheel filter change from 0 to 0 14:53:49 FLIGetFilterPos err=0 currentPosition=0 14:53:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:53:49 Filter is already there-color wheel unchanged 14:53:49 Received message from Master: op=Shutter serial=109527 14:53:49 Shutter LASER close 14:53:49 Received message from Camera: op=State serial=109529 14:53:49 GetSingleValue result=40 Value=cccccccc 14:53:49 SkyScan query 14:53:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:53:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:49 Parameters OK 14:53:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:49 Set A/D data flow result=40 14:53:49 Set A/D channel type result=40 14:53:49 Set A/D encoding result=40 14:53:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:49 Set channel filter=0.000000e+000 result=40 14:53:49 Config A/D Result=40 14:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:49 Get A/D filter: -9.255963e+061 result=40 14:53:49 Get A/D value=-858993460 result=40 14:53:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:49 Parameters OK 14:53:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:49 Set A/D data flow result=40 14:53:49 Set A/D channel type result=40 [UTC 2019-3-4 14:53:49] 14:53:49 Set A/D encoding result=40 14:53:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:49 Set channel filter=0.000000e+000 result=40 14:53:49 Config A/D Result=40 14:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:49 Get A/D filter: -9.255963e+061 result=40 14:53:49 Get A/D value=-858993460 result=40 14:53:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:53:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:53:49 Aux= 14:53:49 Message to Camera, serial 109529 queued 14:54:26 Received message from Master: op=PointingHead serial=109542 14:54:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:54:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:54:27 Point started: ret=0 14:54:27 point_skyscan result=0 14:54:27 Check angles 14:54:27 SkyScan query 14:54:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:54:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:54:28 Message to Master queued w/err=0: serial=109542 error=0 14:54:33 Received message from Master: op=Filter serial=109543 14:54:33 Color wheel filter change from 0 to 0 14:54:33 FLIGetFilterPos err=0 currentPosition=0 14:54:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:54:33 Filter is already there-color wheel unchanged 14:54:33 Received message from Master: op=Shutter serial=109544 14:54:33 Shutter LASER close 14:54:33 Received message from Camera: op=State serial=109546 14:54:33 GetSingleValue result=40 Value=cccccccc 14:54:33 SkyScan query 14:54:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:54:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:34 Parameters OK 14:54:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:34 Set A/D data flow result=40 14:54:34 Set A/D channel type result=40 14:54:34 Set A/D encoding result=40 14:54:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:34 Set channel filter=0.000000e+000 result=40 14:54:34 Config A/D Result=40 14:54:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:34 Get A/D filter: -9.255963e+061 result=40 14:54:34 Get A/D value=-858993460 result=40 14:54:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:34 Parameters OK 14:54:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:34 Set A/D data flow result=40 14:54:34 Set A/D channel type result=40 14:54:34 Set A/D encoding result=40 14:54:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:34 Set channel filter=0.000000e+000 result=40 14:54:34 Config A/D Result=40 14:54:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:34 Get A/D filter: -9.255963e+061 result=40 14:54:34 Get A/D value=-858993460 result=40 14:54:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:54:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:54:34 Aux= 14:54:34 Message to Camera, serial 109546 queued 14:55:11 Received message from Master: op=PointingHead serial=109559 14:55:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:55:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:55:11 Point started: ret=0 14:55:11 point_skyscan result=0 14:55:12 Check angles 14:55:12 SkyScan query 14:55:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:55:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:55:12 Message to Master queued w/err=0: serial=109559 error=0 14:55:17 Received message from Master: op=Filter serial=109560 14:55:17 Color wheel filter change from 0 to 0 14:55:17 FLIGetFilterPos err=0 currentPosition=0 14:55:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:55:17 Filter is already there-color wheel unchanged 14:55:17 Received message from Master: op=Shutter serial=109561 14:55:17 Shutter LASER close 14:55:17 Received message from Camera: op=State serial=109563 14:55:17 GetSingleValue result=40 Value=cccccccc 14:55:17 SkyScan query 14:55:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:55:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:18 Parameters OK 14:55:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:18 Set A/D data flow result=40 14:55:18 Set A/D channel type result=40 14:55:18 Set A/D encoding result=40 14:55:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:18 Set channel filter=0.000000e+000 result=40 14:55:18 Config A/D Result=40 14:55:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:18 Get A/D filter: -9.255963e+061 result=40 14:55:18 Get A/D value=-858993460 result=40 14:55:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:18 Parameters OK 14:55:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:18 Set A/D data flow result=40 14:55:18 Set A/D channel type result=40 14:55:18 Set A/D encoding result=40 14:55:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:18 Set channel filter=0.000000e+000 result=40 14:55:18 Config A/D Result=40 14:55:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:18 Get A/D filter: -9.255963e+061 result=40 14:55:18 Get A/D value=-858993460 result=40 14:55:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:55:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:55:18 Aux= 14:55:18 Message to Camera, serial 109563 queued 14:55:54 Received message from Master: op=PointingHead serial=109575 14:55:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:55:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:55:54 Point started: ret=0 14:55:54 point_skyscan result=0 14:55:55 Check angles 14:55:55 SkyScan query 14:55:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 14:55:56 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 14:55:56 Check angles 14:55:56 SkyScan query 14:55:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 14:55:56 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 14:55:57 Check angles 14:55:57 SkyScan query 14:55:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.01<-16334 Statuses=0008 0009 14:55:57 Msec=1500 True Az=112.995 Ze=-65.01 Az status=0008 Ze status=0009 14:55:57 Check angles 14:55:57 SkyScan query 14:55:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.965<-17731 Statuses=0008 0009 14:55:58 Msec=2250 True Az=112.995 Ze=-85.965 Az status=0008 Ze status=0009 14:55:58 Check angles 14:55:58 SkyScan query 14:55:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.875<-19125 Statuses=0008 0009 14:55:59 Msec=3000 True Az=112.995 Ze=-106.875 Az status=0008 Ze status=0009 14:55:59 Check angles 14:55:59 SkyScan query 14:55:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.295<-20553 Statuses=0008 0009 14:55:59 Msec=3750 True Az=112.995 Ze=-128.295 Az status=0008 Ze status=0009 14:56:00 Check angles 14:56:00 SkyScan query 14:56:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.28<-21952 Statuses=0008 0009 14:56:00 Msec=4500 True Az=112.995 Ze=-149.28 Az status=0008 Ze status=0009 14:56:00 Check angles 14:56:00 SkyScan query 14:56:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.205<-23347 Statuses=0008 0009 14:56:01 Msec=5250 True Az=112.995 Ze=-170.205 Az status=0008 Ze status=0009 14:56:01 Check angles 14:56:01 SkyScan query 14:56:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:56:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:56:02 Message to Master queued w/err=0: serial=109575 error=0 14:56:07 Received message from Master: op=Filter serial=109576 14:56:07 Color wheel filter change from 0 to 0 14:56:07 FLIGetFilterPos err=0 currentPosition=0 14:56:07 FLIGetStepsRemaining err=0 RemainingSteps=0 14:56:07 Filter is already there-color wheel unchanged 14:56:07 Received message from Master: op=Shutter serial=109577 14:56:07 Shutter LASER open 14:56:07 Received message from Camera: op=State serial=109579 14:56:07 GetSingleValue result=40 Value=cccccccc 14:56:07 SkyScan query 14:56:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:56:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:08 Parameters OK 14:56:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:08 Set A/D data flow result=40 14:56:08 Set A/D channel type result=40 14:56:08 Set A/D encoding result=40 14:56:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:08 Set channel filter=0.000000e+000 result=40 14:56:08 Config A/D Result=40 14:56:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:08 Get A/D filter: -9.255963e+061 result=40 14:56:08 Get A/D value=-858993460 result=40 14:56:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:08 Parameters OK 14:56:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:08 Set A/D data flow result=40 14:56:08 Set A/D channel type result=40 14:56:08 Set A/D encoding result=40 14:56:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:08 Set channel filter=0.000000e+000 result=40 14:56:08 Config A/D Result=40 14:56:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:08 Get A/D filter: -9.255963e+061 result=40 14:56:08 Get A/D value=-858993460 result=40 14:56:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:56:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:56:08 Aux= 14:56:08 Message to Camera, serial 109579 queued 14:56:16 Received message from Master: op=Shutter serial=109589 14:56:16 Shutter LASER close 14:56:17 Received message from Master: op=PointingHead serial=109593 14:56:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:56:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:56:17 Point started: ret=0 14:56:17 point_skyscan result=0 14:56:18 Check angles 14:56:18 SkyScan query 14:56:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 14:56:18 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 14:56:19 Check angles 14:56:19 SkyScan query 14:56:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.815<-20121 Statuses=0008 0009 14:56:19 Msec=750 True Az=112.995 Ze=-121.815 Az status=0008 Ze status=0009 14:56:19 Check angles 14:56:19 SkyScan query 14:56:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 14:56:20 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 14:56:20 Check angles 14:56:20 SkyScan query 14:56:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.425<-17295 Statuses=0008 0009 14:56:21 Msec=2250 True Az=112.995 Ze=-79.425 Az status=0008 Ze status=0009 14:56:21 Check angles 14:56:21 SkyScan query 14:56:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.47<-15898 Statuses=0008 0009 14:56:21 Msec=3000 True Az=112.995 Ze=-58.47 Az status=0008 Ze status=0009 14:56:22 Check angles 14:56:22 SkyScan query 14:56:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.56<-14504 Statuses=0008 0009 14:56:22 Msec=3750 True Az=112.995 Ze=-37.56 Az status=0008 Ze status=0009 14:56:22 Check angles 14:56:22 SkyScan query 14:56:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.17<-13078 Statuses=0008 0009 14:56:23 Msec=4500 True Az=112.995 Ze=-16.17 Az status=0008 Ze status=0009 14:56:23 Check angles 14:56:23 SkyScan query 14:56:24 SkyScan query done: ret=0 az=112.995<-7533 ze=4.95<-11670 Statuses=0008 0009 14:56:24 Msec=5250 True Az=112.995 Ze=4.95 Az status=0008 Ze status=0009 14:56:24 Check angles 14:56:24 SkyScan query 14:56:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:56:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:56:24 Message to Master queued w/err=0: serial=109593 error=0 14:56:29 Received message from Master: op=Filter serial=109594 14:56:29 Color wheel filter change from 0 to 0 14:56:29 FLIGetFilterPos err=0 currentPosition=0 14:56:29 FLIGetStepsRemaining err=0 RemainingSteps=0 14:56:29 Filter is already there-color wheel unchanged 14:56:30 Received message from Master: op=Shutter serial=109595 14:56:30 Shutter LASER close 14:56:30 Received message from Camera: op=State serial=109597 14:56:30 GetSingleValue result=40 Value=cccccccc 14:56:30 SkyScan query 14:56:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:56:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:30 Parameters OK 14:56:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:30 Set A/D data flow result=40 14:56:30 Set A/D channel type result=40 14:56:30 Set A/D encoding result=40 14:56:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:30 Set channel filter=0.000000e+000 result=40 14:56:30 Config A/D Result=40 14:56:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:30 Get A/D filter: -9.255963e+061 result=40 14:56:30 Get A/D value=-858993460 result=40 14:56:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:30 Parameters OK 14:56:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:30 Set A/D data flow result=40 14:56:30 Set A/D channel type result=40 14:56:30 Set A/D encoding result=40 14:56:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:30 Set channel filter=0.000000e+000 result=40 14:56:30 Config A/D Result=40 14:56:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:30 Get A/D filter: -9.255963e+061 result=40 14:56:30 Get A/D value=-858993460 result=40 14:56:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:56:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:56:30 Aux= 14:56:30 Message to Camera, serial 109597 queued 14:57:07 Received message from Master: op=PointingHead serial=109610 14:57:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:57:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:57:07 Point started: ret=0 14:57:07 point_skyscan result=0 14:57:08 Check angles 14:57:08 SkyScan query 14:57:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:57:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:57:09 Message to Master queued w/err=0: serial=109610 error=0 14:57:14 Received message from Master: op=Filter serial=109611 14:57:14 Color wheel filter change from 0 to 0 14:57:14 FLIGetFilterPos err=0 currentPosition=0 14:57:14 FLIGetStepsRemaining err=0 RemainingSteps=0 14:57:14 Filter is already there-color wheel unchanged 14:57:14 Received message from Master: op=Shutter serial=109612 14:57:14 Shutter LASER close 14:57:14 Received message from Camera: op=State serial=109614 14:57:14 GetSingleValue result=40 Value=cccccccc 14:57:14 SkyScan query 14:57:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:57:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:15 Parameters OK 14:57:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:15 Set A/D data flow result=40 14:57:15 Set A/D channel type result=40 14:57:15 Set A/D encoding result=40 14:57:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:15 Set channel filter=0.000000e+000 result=40 14:57:15 Config A/D Result=40 14:57:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:15 Get A/D filter: -9.255963e+061 result=40 14:57:15 Get A/D value=-858993460 result=40 14:57:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:15 Parameters OK 14:57:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:15 Set A/D data flow result=40 14:57:15 Set A/D channel type result=40 14:57:15 Set A/D encoding result=40 14:57:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:15 Set channel filter=0.000000e+000 result=40 14:57:15 Config A/D Result=40 14:57:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:15 Get A/D filter: -9.255963e+061 result=40 14:57:15 Get A/D value=-858993460 result=40 14:57:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:57:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:57:15 Aux= 14:57:15 Message to Camera, serial 109614 queued 14:57:51 Received message from Master: op=PointingHead serial=109627 14:57:51 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:57:51 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:57:52 Point started: ret=0 14:57:52 point_skyscan result=0 14:57:53 Check angles 14:57:53 SkyScan query 14:57:53 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 14:57:53 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 14:57:53 Check angles 14:57:53 SkyScan query 14:57:54 SkyScan query done: ret=0 az=153.6<-10240 ze=-6.495<-12433 Statuses=0009 0008 14:57:54 Msec=750 True Az=153.6 Ze=-6.495 Az status=0009 Ze status=0008 14:57:54 Check angles 14:57:54 SkyScan query 14:57:55 SkyScan query done: ret=0 az=171<-11400 ze=-6.495<-12433 Statuses=0009 0008 14:57:55 Msec=1500 True Az=171 Ze=-6.495 Az status=0009 Ze status=0008 14:57:55 Check angles 14:57:55 SkyScan query 14:57:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:57:55 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 14:57:55 Message to Master queued w/err=0: serial=109627 error=0 14:58:00 Received message from Master: op=Filter serial=109628 14:58:00 Color wheel filter change from 0 to 0 14:58:00 FLIGetFilterPos err=0 currentPosition=0 14:58:00 FLIGetStepsRemaining err=0 RemainingSteps=0 14:58:00 Filter is already there-color wheel unchanged 14:58:01 Received message from Master: op=Shutter serial=109629 14:58:01 Shutter LASER close 14:58:01 Received message from Camera: op=State serial=109631 14:58:01 GetSingleValue result=40 Value=cccccccc 14:58:01 SkyScan query 14:58:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:58:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:01 Parameters OK 14:58:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:01 Set A/D data flow result=40 14:58:01 Set A/D channel type result=40 14:58:01 Set A/D encoding result=40 14:58:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:01 Set channel filter=0.000000e+000 result=40 14:58:01 Config A/D Result=40 14:58:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:01 Get A/D filter: -9.255963e+061 result=40 14:58:01 Get A/D value=-858993460 result=40 14:58:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:01 Parameters OK 14:58:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:01 Set A/D data flow result=40 14:58:01 Set A/D channel type result=40 14:58:01 Set A/D encoding result=40 14:58:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:01 Set channel filter=0.000000e+000 result=40 14:58:01 Config A/D Result=40 14:58:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:01 Get A/D filter: -9.255963e+061 result=40 14:58:01 Get A/D value=-858993460 result=40 14:58:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:58:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:58:01 Aux= 14:58:01 Message to Camera, serial 109631 queued 14:58:38 Received message from Master: op=PointingHead serial=109644 14:58:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:58:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:58:38 Point started: ret=0 14:58:38 point_skyscan result=0 14:58:39 Check angles 14:58:39 SkyScan query 14:58:40 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 14:58:40 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 14:58:40 Check angles 14:58:40 SkyScan query 14:58:40 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 14:58:40 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 14:58:41 Check angles 14:58:41 SkyScan query 14:58:41 SkyScan query done: ret=0 az=117.255<-7817 ze=6.495<-11567 Statuses=0009 0008 14:58:41 Msec=1500 True Az=117.255 Ze=6.495 Az status=0009 Ze status=0008 14:58:41 Check angles 14:58:41 SkyScan query 14:58:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:58:42 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:58:42 Message to Master queued w/err=0: serial=109644 error=0 14:58:47 Received message from Master: op=Filter serial=109645 14:58:47 Color wheel filter change from 0 to 0 14:58:47 FLIGetFilterPos err=0 currentPosition=0 14:58:47 FLIGetStepsRemaining err=0 RemainingSteps=0 14:58:47 Filter is already there-color wheel unchanged 14:58:47 Received message from Master: op=Shutter serial=109646 14:58:47 Shutter LASER close 14:58:47 Received message from Camera: op=State serial=109648 14:58:47 GetSingleValue result=40 Value=cccccccc 14:58:47 SkyScan query 14:58:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:58:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:48 Parameters OK 14:58:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:48 Set A/D data flow result=40 14:58:48 Set A/D channel type result=40 14:58:48 Set A/D encoding result=40 14:58:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:48 Set channel filter=0.000000e+000 result=40 14:58:48 Config A/D Result=40 14:58:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:48 Get A/D filter: -9.255963e+061 result=40 14:58:48 Get A/D value=-858993460 result=40 14:58:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:48 Parameters OK 14:58:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:48 Set A/D data flow result=40 14:58:48 Set A/D channel type result=40 14:58:48 Set A/D encoding result=40 14:58:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:48 Set channel filter=0.000000e+000 result=40 14:58:48 Config A/D Result=40 14:58:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:48 Get A/D filter: -9.255963e+061 result=40 14:58:48 Get A/D value=-858993460 result=40 14:58:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:58:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:58:48 Aux= 14:58:48 Message to Camera, serial 109648 queued 14:59:25 Received message from Master: op=PointingHead serial=109661 14:59:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:59:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:59:25 Point started: ret=0 14:59:25 point_skyscan result=0 14:59:26 Check angles 14:59:26 SkyScan query 14:59:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.655<-13577 Statuses=0008 0009 14:59:26 Msec=0 True Az=112.995 Ze=-23.655 Az status=0008 Ze status=0009 14:59:26 Check angles 14:59:26 SkyScan query 14:59:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.58<-14972 Statuses=0008 0009 14:59:27 Msec=750 True Az=112.995 Ze=-44.58 Az status=0008 Ze status=0009 14:59:27 Check angles 14:59:27 SkyScan query 14:59:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 14:59:28 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 14:59:28 Check angles 14:59:28 SkyScan query 14:59:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.985<-17799 Statuses=0008 0009 14:59:29 Msec=2250 True Az=112.995 Ze=-86.985 Az status=0008 Ze status=0009 14:59:29 Check angles 14:59:29 SkyScan query 14:59:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.375<-19225 Statuses=0008 0009 14:59:29 Msec=3000 True Az=112.995 Ze=-108.375 Az status=0008 Ze status=0009 14:59:29 Check angles 14:59:29 SkyScan query 14:59:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.315<-20621 Statuses=0008 0009 14:59:30 Msec=3750 True Az=112.995 Ze=-129.315 Az status=0008 Ze status=0009 14:59:30 Check angles 14:59:30 SkyScan query 14:59:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.645<-22043 Statuses=0008 0009 14:59:31 Msec=4500 True Az=112.995 Ze=-150.645 Az status=0008 Ze status=0009 14:59:31 Check angles 14:59:31 SkyScan query 14:59:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.69<-23446 Statuses=0008 0009 14:59:32 Msec=5250 True Az=112.995 Ze=-171.69 Az status=0008 Ze status=0009 14:59:32 Check angles 14:59:32 SkyScan query 14:59:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:59:32 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:59:32 Message to Master queued w/err=0: serial=109661 error=0 14:59:37 Received message from Master: op=Filter serial=109662 14:59:37 Color wheel filter change from 0 to 0 14:59:37 FLIGetFilterPos err=0 currentPosition=0 14:59:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:59:37 Filter is already there-color wheel unchanged 14:59:37 Received message from Master: op=Shutter serial=109663 14:59:37 Shutter LASER open 14:59:38 Received message from Camera: op=State serial=109665 14:59:38 GetSingleValue result=40 Value=cccccccc 14:59:38 SkyScan query 14:59:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:59:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:38 Parameters OK 14:59:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:38 Set A/D data flow result=40 14:59:38 Set A/D channel type result=40 14:59:38 Set A/D encoding result=40 14:59:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:38 Set channel filter=0.000000e+000 result=40 14:59:38 Config A/D Result=40 14:59:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:38 Get A/D filter: -9.255963e+061 result=40 14:59:38 Get A/D value=-858993460 result=40 14:59:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:38 Parameters OK 14:59:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:38 Set A/D data flow result=40 14:59:38 Set A/D channel type result=40 14:59:38 Set A/D encoding result=40 14:59:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:38 Set channel filter=0.000000e+000 result=40 14:59:38 Config A/D Result=40 14:59:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:38 Get A/D filter: -9.255963e+061 result=40 14:59:38 Get A/D value=-858993460 result=40 14:59:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:59:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:59:38 Aux= 14:59:38 Message to Camera, serial 109665 queued 14:59:47 Received message from Master: op=Shutter serial=109675 14:59:47 Shutter LASER close 14:59:47 Received message from Master: op=PointingHead serial=109679 14:59:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:59:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:59:47 Point started: ret=0 14:59:47 point_skyscan result=0 14:59:48 Check angles 14:59:48 SkyScan query 14:59:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 14:59:49 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 14:59:49 Check angles 14:59:49 SkyScan query 14:59:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.785<-20119 Statuses=0008 0009 14:59:50 Msec=750 True Az=112.995 Ze=-121.785 Az status=0008 Ze status=0009 14:59:50 Check angles 14:59:50 SkyScan query 14:59:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.86<-18724 Statuses=0008 0009 14:59:50 Msec=1500 True Az=112.995 Ze=-100.86 Az status=0008 Ze status=0009 14:59:50 Check angles 14:59:50 SkyScan query 14:59:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.875<-17325 Statuses=0008 0009 14:59:51 Msec=2250 True Az=112.995 Ze=-79.875 Az status=0008 Ze status=0009 14:59:51 Check angles 14:59:51 SkyScan query 14:59:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.44<-15896 Statuses=0008 0009 14:59:52 Msec=3000 True Az=112.995 Ze=-58.44 Az status=0008 Ze status=0009 14:59:52 Check angles 14:59:52 SkyScan query 14:59:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.515<-14501 Statuses=0008 0009 14:59:53 Msec=3750 True Az=112.995 Ze=-37.515 Az status=0008 Ze status=0009 14:59:53 Check angles 14:59:53 SkyScan query 14:59:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.56<-13104 Statuses=0008 0009 14:59:53 Msec=4500 True Az=112.995 Ze=-16.56 Az status=0008 Ze status=0009 14:59:53 Check angles 14:59:53 SkyScan query 14:59:54 SkyScan query done: ret=0 az=112.995<-7533 ze=4.62<-11692 Statuses=0008 0009 14:59:54 Msec=5250 True Az=112.995 Ze=4.62 Az status=0008 Ze status=0009 14:59:54 Check angles 14:59:54 SkyScan query 14:59:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:59:55 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:59:55 Message to Master queued w/err=0: serial=109679 error=0 15:00:00 Received message from Master: op=Filter serial=109680 15:00:00 Color wheel filter change from 0 to 0 15:00:00 FLIGetFilterPos err=0 currentPosition=0 15:00:00 FLIGetStepsRemaining err=0 RemainingSteps=0 15:00:00 Filter is already there-color wheel unchanged 15:00:00 Received message from Master: op=Shutter serial=109681 15:00:00 Shutter LASER close 15:00:00 Received message from Camera: op=State serial=109683 15:00:00 GetSingleValue result=40 Value=cccccccc 15:00:00 SkyScan query 15:00:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:00:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:01 Parameters OK 15:00:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:01 Set A/D data flow result=40 15:00:01 Set A/D channel type result=40 15:00:01 Set A/D encoding result=40 15:00:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:01 Set channel filter=0.000000e+000 result=40 15:00:01 Config A/D Result=40 15:00:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:01 Get A/D filter: -9.255963e+061 result=40 15:00:01 Get A/D value=-858993460 result=40 15:00:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:01 Parameters OK 15:00:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:01 Set A/D data flow result=40 15:00:01 Set A/D channel type result=40 15:00:01 Set A/D encoding result=40 15:00:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:01 Set channel filter=0.000000e+000 result=40 15:00:01 Config A/D Result=40 15:00:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:01 Get A/D filter: -9.255963e+061 result=40 15:00:01 Get A/D value=-858993460 result=40 15:00:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:00:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:00:01 Aux= 15:00:01 Message to Camera, serial 109683 queued 15:00:38 Received message from Master: op=PointingHead serial=109696 15:00:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:00:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:00:38 Point started: ret=0 15:00:38 point_skyscan result=0 15:00:39 Check angles 15:00:39 SkyScan query 15:00:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:00:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:00:39 Message to Master queued w/err=0: serial=109696 error=0 15:00:44 Received message from Master: op=Filter serial=109697 15:00:44 Color wheel filter change from 0 to 0 15:00:44 FLIGetFilterPos err=0 currentPosition=0 15:00:44 FLIGetStepsRemaining err=0 RemainingSteps=0 15:00:44 Filter is already there-color wheel unchanged 15:00:44 Received message from Master: op=Shutter serial=109698 15:00:44 Shutter LASER close 15:00:44 Received message from Camera: op=State serial=109700 15:00:44 GetSingleValue result=40 Value=cccccccc 15:00:44 SkyScan query 15:00:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:00:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:45 Parameters OK 15:00:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:45 Set A/D data flow result=40 15:00:45 Set A/D channel type result=40 15:00:45 Set A/D encoding result=40 15:00:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:45 Set channel filter=0.000000e+000 result=40 15:00:45 Config A/D Result=40 15:00:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:45 Get A/D filter: -9.255963e+061 result=40 15:00:45 Get A/D value=-858993460 result=40 15:00:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:45 Parameters OK 15:00:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:45 Set A/D data flow result=40 15:00:45 Set A/D channel type result=40 15:00:45 Set A/D encoding result=40 15:00:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:45 Set channel filter=0.000000e+000 result=40 15:00:45 Config A/D Result=40 15:00:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:45 Get A/D filter: -9.255963e+061 result=40 15:00:45 Get A/D value=-858993460 result=40 15:00:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:00:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:00:45 Aux= 15:00:45 Message to Camera, serial 109700 queued 15:01:21 Received message from Master: op=PointingHead serial=109712 15:01:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:01:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:01:21 Point started: ret=0 15:01:21 point_skyscan result=0 15:01:22 Check angles 15:01:22 SkyScan query 15:01:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:01:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:01:23 Message to Master queued w/err=0: serial=109712 error=0 15:01:28 Received message from Master: op=Filter serial=109713 15:01:28 Color wheel filter change from 0 to 0 15:01:28 FLIGetFilterPos err=0 currentPosition=0 15:01:28 FLIGetStepsRemaining err=0 RemainingSteps=0 15:01:28 Filter is already there-color wheel unchanged 15:01:28 Received message from Master: op=Shutter serial=109714 15:01:28 Shutter LASER close 15:01:28 Received message from Camera: op=State serial=109716 15:01:28 GetSingleValue result=40 Value=cccccccc 15:01:28 SkyScan query 15:01:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:01:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:28 Parameters OK 15:01:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:28 Set A/D data flow result=40 15:01:28 Set A/D channel type result=40 15:01:28 Set A/D encoding result=40 15:01:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:28 Set channel filter=0.000000e+000 result=40 15:01:28 Config A/D Result=40 15:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:28 Get A/D filter: -9.255963e+061 result=40 15:01:28 Get A/D value=-858993460 result=40 15:01:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:28 Parameters OK 15:01:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:28 Set A/D data flow result=40 15:01:28 Set A/D channel type result=40 15:01:28 Set A/D encoding result=40 15:01:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:28 Set channel filter=0.000000e+000 result=40 15:01:28 Config A/D Result=40 15:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:28 Get A/D filter: -9.255963e+061 result=40 15:01:28 Get A/D value=-858993460 result=40 15:01:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:01:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:01:28 Aux= 15:01:28 Message to Camera, serial 109716 queued 15:02:05 Received message from Master: op=PointingHead serial=109729 15:02:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:02:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:02:06 Point started: ret=0 15:02:06 point_skyscan result=0 15:02:06 Check angles 15:02:06 SkyScan query 15:02:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:02:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:02:07 Message to Master queued w/err=0: serial=109729 error=0 15:02:12 Received message from Master: op=Filter serial=109730 15:02:12 Color wheel filter change from 0 to 0 15:02:12 FLIGetFilterPos err=0 currentPosition=0 15:02:12 FLIGetStepsRemaining err=0 RemainingSteps=0 15:02:12 Filter is already there-color wheel unchanged 15:02:12 Received message from Master: op=Shutter serial=109731 15:02:12 Shutter LASER close 15:02:12 Received message from Camera: op=State serial=109733 15:02:12 GetSingleValue result=40 Value=cccccccc 15:02:12 SkyScan query 15:02:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:02:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:13 Parameters OK 15:02:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:13 Set A/D data flow result=40 15:02:13 Set A/D channel type result=40 15:02:13 Set A/D encoding result=40 15:02:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:13 Set channel filter=0.000000e+000 result=40 15:02:13 Config A/D Result=40 15:02:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:13 Get A/D filter: -9.255963e+061 result=40 15:02:13 Get A/D value=-858993460 result=40 15:02:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:13 Parameters OK 15:02:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:13 Set A/D data flow result=40 15:02:13 Set A/D channel type result=40 15:02:13 Set A/D encoding result=40 15:02:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:13 Set channel filter=0.000000e+000 result=40 15:02:13 Config A/D Result=40 15:02:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:13 Get A/D filter: -9.255963e+061 result=40 15:02:13 Get A/D value=-858993460 result=40 15:02:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:02:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:02:13 Aux= 15:02:13 Message to Camera, serial 109733 queued 15:02:50 Received message from Master: op=PointingHead serial=109746 15:02:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:02:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:02:50 Point started: ret=0 15:02:50 point_skyscan result=0 15:02:51 Check angles 15:02:51 SkyScan query 15:02:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 15:02:51 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 15:02:51 Check angles 15:02:51 SkyScan query 15:02:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 15:02:52 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 15:02:52 Check angles 15:02:52 SkyScan query 15:02:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.25<-16350 Statuses=0008 0009 15:02:53 Msec=1500 True Az=112.995 Ze=-65.25 Az status=0008 Ze status=0009 15:02:53 Check angles 15:02:53 SkyScan query 15:02:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.205<-17747 Statuses=0008 0009 15:02:53 Msec=2250 True Az=112.995 Ze=-86.205 Az status=0008 Ze status=0009 15:02:54 Check angles 15:02:54 SkyScan query 15:02:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.145<-19143 Statuses=0008 0009 15:02:54 Msec=3000 True Az=112.995 Ze=-107.145 Az status=0008 Ze status=0009 15:02:54 Check angles 15:02:54 SkyScan query 15:02:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.13<-20542 Statuses=0008 0009 15:02:55 Msec=3750 True Az=112.995 Ze=-128.13 Az status=0008 Ze status=0009 15:02:55 Check angles 15:02:55 SkyScan query 15:02:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.085<-21939 Statuses=0008 0009 15:02:56 Msec=4500 True Az=112.995 Ze=-149.085 Az status=0008 Ze status=0009 15:02:56 Check angles 15:02:56 SkyScan query 15:02:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.04<-23336 Statuses=0008 0009 15:02:56 Msec=5250 True Az=112.995 Ze=-170.04 Az status=0008 Ze status=0009 15:02:57 Check angles 15:02:57 SkyScan query 15:02:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:02:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:02:57 Message to Master queued w/err=0: serial=109746 error=0 15:03:02 Received message from Master: op=Filter serial=109747 15:03:02 Color wheel filter change from 0 to 0 15:03:02 FLIGetFilterPos err=0 currentPosition=0 15:03:02 FLIGetStepsRemaining err=0 RemainingSteps=0 15:03:02 Filter is already there-color wheel unchanged 15:03:02 Received message from Master: op=Shutter serial=109748 15:03:02 Shutter LASER open 15:03:03 Received message from Camera: op=State serial=109750 15:03:03 GetSingleValue result=40 Value=cccccccc 15:03:03 SkyScan query 15:03:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:03:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:03 Parameters OK 15:03:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:03 Set A/D data flow result=40 15:03:03 Set A/D channel type result=40 15:03:03 Set A/D encoding result=40 15:03:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:03 Set channel filter=0.000000e+000 result=40 15:03:03 Config A/D Result=40 15:03:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:03 Get A/D filter: -9.255963e+061 result=40 15:03:03 Get A/D value=-858993460 result=40 15:03:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:03 Parameters OK 15:03:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:03 Set A/D data flow result=40 15:03:03 Set A/D channel type result=40 15:03:03 Set A/D encoding result=40 15:03:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:03 Set channel filter=0.000000e+000 result=40 15:03:03 Config A/D Result=40 15:03:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:03 Get A/D filter: -9.255963e+061 result=40 15:03:03 Get A/D value=-858993460 result=40 15:03:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:03:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:03:03 Aux= 15:03:03 Message to Camera, serial 109750 queued 15:03:12 Received message from Master: op=Shutter serial=109760 15:03:12 Shutter LASER close 15:03:12 Received message from Master: op=PointingHead serial=109764 15:03:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:03:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:03:12 Point started: ret=0 15:03:12 point_skyscan result=0 15:03:13 Check angles 15:03:13 SkyScan query 15:03:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 15:03:14 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 15:03:14 Check angles 15:03:14 SkyScan query 15:03:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 15:03:15 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 15:03:15 Check angles 15:03:15 SkyScan query 15:03:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.55<-18770 Statuses=0008 0009 15:03:15 Msec=1500 True Az=112.995 Ze=-101.55 Az status=0008 Ze status=0009 15:03:15 Check angles 15:03:15 SkyScan query 15:03:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.58<-17372 Statuses=0008 0009 15:03:16 Msec=2250 True Az=112.995 Ze=-80.58 Az status=0008 Ze status=0009 15:03:16 Check angles 15:03:16 SkyScan query 15:03:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 15:03:17 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 15:03:17 Check angles 15:03:17 SkyScan query 15:03:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 15:03:18 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 15:03:18 Check angles 15:03:18 SkyScan query 15:03:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.295<-13153 Statuses=0008 0009 15:03:18 Msec=4500 True Az=112.995 Ze=-17.295 Az status=0008 Ze status=0009 15:03:18 Check angles 15:03:18 SkyScan query 15:03:19 SkyScan query done: ret=0 az=112.995<-7533 ze=4.095<-11727 Statuses=0008 0009 15:03:19 Msec=5250 True Az=112.995 Ze=4.095 Az status=0008 Ze status=0009 15:03:19 Check angles 15:03:19 SkyScan query 15:03:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:03:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:03:20 Message to Master queued w/err=0: serial=109764 error=0 15:03:25 Received message from Master: op=Filter serial=109765 15:03:25 Color wheel filter change from 0 to 0 15:03:25 FLIGetFilterPos err=0 currentPosition=0 15:03:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:03:25 Filter is already there-color wheel unchanged 15:03:25 Received message from Master: op=Shutter serial=109766 15:03:25 Shutter LASER close 15:03:25 Received message from Camera: op=State serial=109768 15:03:25 GetSingleValue result=40 Value=cccccccc 15:03:25 SkyScan query 15:03:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:03:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:26 Parameters OK 15:03:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:26 Set A/D data flow result=40 15:03:26 Set A/D channel type result=40 15:03:26 Set A/D encoding result=40 15:03:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:26 Set channel filter=0.000000e+000 result=40 15:03:26 Config A/D Result=40 15:03:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:26 Get A/D filter: -9.255963e+061 result=40 15:03:26 Get A/D value=-858993460 result=40 15:03:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:26 Parameters OK 15:03:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:26 Set A/D data flow result=40 15:03:26 Set A/D channel type result=40 15:03:26 Set A/D encoding result=40 15:03:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:26 Set channel filter=0.000000e+000 result=40 15:03:26 Config A/D Result=40 15:03:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:26 Get A/D filter: -9.255963e+061 result=40 15:03:26 Get A/D value=-858993460 result=40 15:03:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:03:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:03:26 Aux= 15:03:26 Message to Camera, serial 109768 queued 15:03:38 Received message from Master: op=Identify serial=109769 [UTC 2019-3-4 15:03:50] 15:04:03 Received message from Master: op=PointingHead serial=109784 15:04:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:04:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:04:03 Point started: ret=0 15:04:03 point_skyscan result=0 15:04:04 Check angles 15:04:04 SkyScan query 15:04:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:04:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:04:04 Message to Master queued w/err=0: serial=109784 error=0 15:04:09 Received message from Master: op=Filter serial=109785 15:04:09 Color wheel filter change from 0 to 0 15:04:09 FLIGetFilterPos err=0 currentPosition=0 15:04:09 FLIGetStepsRemaining err=0 RemainingSteps=0 15:04:09 Filter is already there-color wheel unchanged 15:04:09 Received message from Master: op=Shutter serial=109786 15:04:09 Shutter LASER close 15:04:09 Received message from Camera: op=State serial=109788 15:04:09 GetSingleValue result=40 Value=cccccccc 15:04:09 SkyScan query 15:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:04:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:10 Parameters OK 15:04:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:10 Set A/D data flow result=40 15:04:10 Set A/D channel type result=40 15:04:10 Set A/D encoding result=40 15:04:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:10 Set channel filter=0.000000e+000 result=40 15:04:10 Config A/D Result=40 15:04:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:10 Get A/D filter: -9.255963e+061 result=40 15:04:10 Get A/D value=-858993460 result=40 15:04:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:10 Parameters OK 15:04:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:10 Set A/D data flow result=40 15:04:10 Set A/D channel type result=40 15:04:10 Set A/D encoding result=40 15:04:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:10 Set channel filter=0.000000e+000 result=40 15:04:10 Config A/D Result=40 15:04:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:10 Get A/D filter: -9.255963e+061 result=40 15:04:10 Get A/D value=-858993460 result=40 15:04:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:04:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:04:10 Aux= 15:04:10 Message to Camera, serial 109788 queued 15:04:47 Received message from Master: op=PointingHead serial=109801 15:04:47 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 15:04:47 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 15:04:47 Point started: ret=0 15:04:47 point_skyscan result=0 15:04:48 Check angles 15:04:48 SkyScan query 15:04:49 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 15:04:49 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 15:04:49 Check angles 15:04:49 SkyScan query 15:04:49 SkyScan query done: ret=0 az=153.51<-10234 ze=-6.51<-12434 Statuses=0009 0008 15:04:49 Msec=750 True Az=153.51 Ze=-6.51 Az status=0009 Ze status=0008 15:04:49 Check angles 15:04:49 SkyScan query 15:04:50 SkyScan query done: ret=0 az=171.015<-11401 ze=-6.495<-12433 Statuses=0009 0008 15:04:50 Msec=1500 True Az=171.015 Ze=-6.495 Az status=0009 Ze status=0008 15:04:50 Check angles 15:04:50 SkyScan query 15:04:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:04:51 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 15:04:51 Message to Master queued w/err=0: serial=109801 error=0 15:04:56 Received message from Master: op=Filter serial=109802 15:04:56 Color wheel filter change from 0 to 0 15:04:56 FLIGetFilterPos err=0 currentPosition=0 15:04:56 FLIGetStepsRemaining err=0 RemainingSteps=0 15:04:56 Filter is already there-color wheel unchanged 15:04:56 Received message from Master: op=Shutter serial=109803 15:04:56 Shutter LASER close 15:04:56 Received message from Camera: op=State serial=109805 15:04:56 GetSingleValue result=40 Value=cccccccc 15:04:56 SkyScan query 15:04:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:04:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:57 Parameters OK 15:04:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:57 Set A/D data flow result=40 15:04:57 Set A/D channel type result=40 15:04:57 Set A/D encoding result=40 15:04:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:57 Set channel filter=0.000000e+000 result=40 15:04:57 Config A/D Result=40 15:04:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:57 Get A/D filter: -9.255963e+061 result=40 15:04:57 Get A/D value=-858993460 result=40 15:04:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:57 Parameters OK 15:04:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:57 Set A/D data flow result=40 15:04:57 Set A/D channel type result=40 15:04:57 Set A/D encoding result=40 15:04:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:57 Set channel filter=0.000000e+000 result=40 15:04:57 Config A/D Result=40 15:04:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:57 Get A/D filter: -9.255963e+061 result=40 15:04:57 Get A/D value=-858993460 result=40 15:04:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:04:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:04:57 Aux= 15:04:57 Message to Camera, serial 109805 queued 15:05:34 Received message from Master: op=PointingHead serial=109818 15:05:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:05:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:05:34 Point started: ret=0 15:05:34 point_skyscan result=0 15:05:35 Check angles 15:05:35 SkyScan query 15:05:35 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 15:05:35 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 15:05:35 Check angles 15:05:35 SkyScan query 15:05:36 SkyScan query done: ret=0 az=135.405<-9027 ze=6.495<-11567 Statuses=0009 0008 15:05:36 Msec=750 True Az=135.405 Ze=6.495 Az status=0009 Ze status=0008 15:05:36 Check angles 15:05:36 SkyScan query 15:05:37 SkyScan query done: ret=0 az=117.93<-7862 ze=6.495<-11567 Statuses=0009 0008 15:05:37 Msec=1500 True Az=117.93 Ze=6.495 Az status=0009 Ze status=0008 15:05:37 Check angles 15:05:37 SkyScan query 15:05:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:05:37 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:05:37 Message to Master queued w/err=0: serial=109818 error=0 15:05:42 Received message from Master: op=Filter serial=109819 15:05:42 Color wheel filter change from 0 to 0 15:05:42 FLIGetFilterPos err=0 currentPosition=0 15:05:42 FLIGetStepsRemaining err=0 RemainingSteps=0 15:05:42 Filter is already there-color wheel unchanged 15:05:43 Received message from Master: op=Shutter serial=109820 15:05:43 Shutter LASER close 15:05:43 Received message from Camera: op=State serial=109822 15:05:43 GetSingleValue result=40 Value=cccccccc 15:05:43 SkyScan query 15:05:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:05:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:43 Parameters OK 15:05:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:43 Set A/D data flow result=40 15:05:43 Set A/D channel type result=40 15:05:43 Set A/D encoding result=40 15:05:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:43 Set channel filter=0.000000e+000 result=40 15:05:43 Config A/D Result=40 15:05:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:43 Get A/D filter: -9.255963e+061 result=40 15:05:43 Get A/D value=-858993460 result=40 15:05:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:43 Parameters OK 15:05:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:43 Set A/D data flow result=40 15:05:43 Set A/D channel type result=40 15:05:43 Set A/D encoding result=40 15:05:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:43 Set channel filter=0.000000e+000 result=40 15:05:43 Config A/D Result=40 15:05:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:43 Get A/D filter: -9.255963e+061 result=40 15:05:43 Get A/D value=-858993460 result=40 15:05:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:05:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:05:43 Aux= 15:05:43 Message to Camera, serial 109822 queued 15:06:20 Received message from Master: op=PointingHead serial=109835 15:06:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:06:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:06:20 Point started: ret=0 15:06:20 point_skyscan result=0 15:06:21 Check angles 15:06:21 SkyScan query 15:06:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 15:06:22 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 15:06:22 Check angles 15:06:22 SkyScan query 15:06:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 15:06:22 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 15:06:23 Check angles 15:06:23 SkyScan query 15:06:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 15:06:23 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 15:06:23 Check angles 15:06:23 SkyScan query 15:06:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 15:06:24 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 15:06:24 Check angles 15:06:24 SkyScan query 15:06:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.295<-19153 Statuses=0008 0009 15:06:25 Msec=3000 True Az=112.995 Ze=-107.295 Az status=0008 Ze status=0009 15:06:25 Check angles 15:06:25 SkyScan query 15:06:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.715<-20581 Statuses=0008 0009 15:06:26 Msec=3750 True Az=112.995 Ze=-128.715 Az status=0008 Ze status=0009 15:06:26 Check angles 15:06:26 SkyScan query 15:06:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 15:06:26 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 15:06:26 Check angles 15:06:26 SkyScan query 15:06:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.61<-23374 Statuses=0008 0009 15:06:27 Msec=5250 True Az=112.995 Ze=-170.61 Az status=0008 Ze status=0009 15:06:27 Check angles 15:06:27 SkyScan query 15:06:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:06:28 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:06:28 Message to Master queued w/err=0: serial=109835 error=0 15:06:33 Received message from Master: op=Filter serial=109836 15:06:33 Color wheel filter change from 0 to 0 15:06:33 FLIGetFilterPos err=0 currentPosition=0 15:06:33 FLIGetStepsRemaining err=0 RemainingSteps=0 15:06:33 Filter is already there-color wheel unchanged 15:06:33 Received message from Master: op=Shutter serial=109837 15:06:33 Shutter LASER open 15:06:33 Received message from Camera: op=State serial=109839 15:06:33 GetSingleValue result=40 Value=cccccccc 15:06:33 SkyScan query 15:06:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:06:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:34 Parameters OK 15:06:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:34 Set A/D data flow result=40 15:06:34 Set A/D channel type result=40 15:06:34 Set A/D encoding result=40 15:06:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:34 Set channel filter=0.000000e+000 result=40 15:06:34 Config A/D Result=40 15:06:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:34 Get A/D filter: -9.255963e+061 result=40 15:06:34 Get A/D value=-858993460 result=40 15:06:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:34 Parameters OK 15:06:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:34 Set A/D data flow result=40 15:06:34 Set A/D channel type result=40 15:06:34 Set A/D encoding result=40 15:06:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:34 Set channel filter=0.000000e+000 result=40 15:06:34 Config A/D Result=40 15:06:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:34 Get A/D filter: -9.255963e+061 result=40 15:06:34 Get A/D value=-858993460 result=40 15:06:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:06:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:06:34 Aux= 15:06:34 Message to Camera, serial 109839 queued 15:06:42 Received message from Master: op=Shutter serial=109849 15:06:42 Shutter LASER close 15:06:43 Received message from Master: op=PointingHead serial=109853 15:06:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:06:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:06:43 Point started: ret=0 15:06:43 point_skyscan result=0 15:06:44 Check angles 15:06:44 SkyScan query 15:06:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.71<-21514 Statuses=0008 0009 15:06:44 Msec=0 True Az=112.995 Ze=-142.71 Az status=0008 Ze status=0009 15:06:44 Check angles 15:06:44 SkyScan query 15:06:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.71<-20114 Statuses=0008 0009 15:06:45 Msec=750 True Az=112.995 Ze=-121.71 Az status=0008 Ze status=0009 15:06:45 Check angles 15:06:45 SkyScan query 15:06:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.275<-18685 Statuses=0008 0009 15:06:46 Msec=1500 True Az=112.995 Ze=-100.275 Az status=0008 Ze status=0009 15:06:46 Check angles 15:06:46 SkyScan query 15:06:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.305<-17287 Statuses=0008 0009 15:06:47 Msec=2250 True Az=112.995 Ze=-79.305 Az status=0008 Ze status=0009 15:06:47 Check angles 15:06:47 SkyScan query 15:06:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.365<-15891 Statuses=0008 0009 15:06:47 Msec=3000 True Az=112.995 Ze=-58.365 Az status=0008 Ze status=0009 15:06:47 Check angles 15:06:47 SkyScan query 15:06:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.455<-14497 Statuses=0008 0009 15:06:48 Msec=3750 True Az=112.995 Ze=-37.455 Az status=0008 Ze status=0009 15:06:48 Check angles 15:06:48 SkyScan query 15:06:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.485<-13099 Statuses=0008 0009 15:06:49 Msec=4500 True Az=112.995 Ze=-16.485 Az status=0008 Ze status=0009 15:06:49 Check angles 15:06:49 SkyScan query 15:06:50 SkyScan query done: ret=0 az=112.995<-7533 ze=4.365<-11709 Statuses=0008 0009 15:06:50 Msec=5250 True Az=112.995 Ze=4.365 Az status=0008 Ze status=0009 15:06:50 Check angles 15:06:50 SkyScan query 15:06:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:06:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:06:50 Message to Master queued w/err=0: serial=109853 error=0 15:06:55 Received message from Master: op=Filter serial=109854 15:06:55 Color wheel filter change from 0 to 0 15:06:55 FLIGetFilterPos err=0 currentPosition=0 15:06:55 FLIGetStepsRemaining err=0 RemainingSteps=0 15:06:55 Filter is already there-color wheel unchanged 15:06:55 Received message from Master: op=Shutter serial=109855 15:06:55 Shutter LASER close 15:06:56 Received message from Camera: op=State serial=109857 15:06:56 GetSingleValue result=40 Value=cccccccc 15:06:56 SkyScan query 15:06:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:06:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:56 Parameters OK 15:06:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:56 Set A/D data flow result=40 15:06:56 Set A/D channel type result=40 15:06:56 Set A/D encoding result=40 15:06:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:56 Set channel filter=0.000000e+000 result=40 15:06:56 Config A/D Result=40 15:06:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:56 Get A/D filter: -9.255963e+061 result=40 15:06:56 Get A/D value=-858993460 result=40 15:06:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:56 Parameters OK 15:06:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:56 Set A/D data flow result=40 15:06:56 Set A/D channel type result=40 15:06:56 Set A/D encoding result=40 15:06:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:56 Set channel filter=0.000000e+000 result=40 15:06:56 Config A/D Result=40 15:06:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:56 Get A/D filter: -9.255963e+061 result=40 15:06:56 Get A/D value=-858993460 result=40 15:06:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:06:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:06:56 Aux= 15:06:56 Message to Camera, serial 109857 queued 15:07:33 Received message from Master: op=PointingHead serial=109870 15:07:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:07:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:07:33 Point started: ret=0 15:07:33 point_skyscan result=0 15:07:34 Check angles 15:07:34 SkyScan query 15:07:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:07:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:07:35 Message to Master queued w/err=0: serial=109870 error=0 15:07:40 Received message from Master: op=Filter serial=109871 15:07:40 Color wheel filter change from 0 to 0 15:07:40 FLIGetFilterPos err=0 currentPosition=0 15:07:40 FLIGetStepsRemaining err=0 RemainingSteps=0 15:07:40 Filter is already there-color wheel unchanged 15:07:40 Received message from Master: op=Shutter serial=109872 15:07:40 Shutter LASER close 15:07:40 Received message from Camera: op=State serial=109874 15:07:40 GetSingleValue result=40 Value=cccccccc 15:07:40 SkyScan query 15:07:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:07:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:40 Parameters OK 15:07:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:40 Set A/D data flow result=40 15:07:40 Set A/D channel type result=40 15:07:40 Set A/D encoding result=40 15:07:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:40 Set channel filter=0.000000e+000 result=40 15:07:40 Config A/D Result=40 15:07:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:40 Get A/D filter: -9.255963e+061 result=40 15:07:40 Get A/D value=-858993460 result=40 15:07:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:40 Parameters OK 15:07:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:40 Set A/D data flow result=40 15:07:40 Set A/D channel type result=40 15:07:40 Set A/D encoding result=40 15:07:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:40 Set channel filter=0.000000e+000 result=40 15:07:40 Config A/D Result=40 15:07:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:40 Get A/D filter: -9.255963e+061 result=40 15:07:40 Get A/D value=-858993460 result=40 15:07:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:07:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:07:40 Aux= 15:07:40 Message to Camera, serial 109874 queued 15:08:17 Received message from Master: op=PointingHead serial=109887 15:08:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:08:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:08:18 Point started: ret=0 15:08:18 point_skyscan result=0 15:08:18 Check angles 15:08:18 SkyScan query 15:08:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:08:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:08:19 Message to Master queued w/err=0: serial=109887 error=0 15:08:24 Received message from Master: op=Filter serial=109888 15:08:24 Color wheel filter change from 0 to 0 15:08:24 FLIGetFilterPos err=0 currentPosition=0 15:08:24 FLIGetStepsRemaining err=0 RemainingSteps=0 15:08:24 Filter is already there-color wheel unchanged 15:08:24 Received message from Master: op=Shutter serial=109889 15:08:24 Shutter LASER close 15:08:24 Received message from Camera: op=State serial=109891 15:08:24 GetSingleValue result=40 Value=cccccccc 15:08:24 SkyScan query 15:08:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:08:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:25 Parameters OK 15:08:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:25 Set A/D data flow result=40 15:08:25 Set A/D channel type result=40 15:08:25 Set A/D encoding result=40 15:08:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:25 Set channel filter=0.000000e+000 result=40 15:08:25 Config A/D Result=40 15:08:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:25 Get A/D filter: -9.255963e+061 result=40 15:08:25 Get A/D value=-858993460 result=40 15:08:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:25 Parameters OK 15:08:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:25 Set A/D data flow result=40 15:08:25 Set A/D channel type result=40 15:08:25 Set A/D encoding result=40 15:08:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:25 Set channel filter=0.000000e+000 result=40 15:08:25 Config A/D Result=40 15:08:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:25 Get A/D filter: -9.255963e+061 result=40 15:08:25 Get A/D value=-858993460 result=40 15:08:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:08:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:08:25 Aux= 15:08:25 Message to Camera, serial 109891 queued 15:09:02 Received message from Master: op=PointingHead serial=109904 15:09:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:09:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:09:02 Point started: ret=0 15:09:02 point_skyscan result=0 15:09:03 Check angles 15:09:03 SkyScan query 15:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:09:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:09:03 Message to Master queued w/err=0: serial=109904 error=0 15:09:08 Received message from Master: op=Filter serial=109905 15:09:08 Color wheel filter change from 0 to 0 15:09:08 FLIGetFilterPos err=0 currentPosition=0 15:09:08 FLIGetStepsRemaining err=0 RemainingSteps=0 15:09:08 Filter is already there-color wheel unchanged 15:09:08 Received message from Master: op=Shutter serial=109906 15:09:08 Shutter LASER close 15:09:09 Received message from Camera: op=State serial=109908 15:09:09 GetSingleValue result=40 Value=cccccccc 15:09:09 SkyScan query 15:09:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:09:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:09 Parameters OK 15:09:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:09 Set A/D data flow result=40 15:09:09 Set A/D channel type result=40 15:09:09 Set A/D encoding result=40 15:09:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:09 Set channel filter=0.000000e+000 result=40 15:09:09 Config A/D Result=40 15:09:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:09 Get A/D filter: -9.255963e+061 result=40 15:09:09 Get A/D value=-858993460 result=40 15:09:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:09 Parameters OK 15:09:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:09 Set A/D data flow result=40 15:09:09 Set A/D channel type result=40 15:09:09 Set A/D encoding result=40 15:09:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:09 Set channel filter=0.000000e+000 result=40 15:09:09 Config A/D Result=40 15:09:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:09 Get A/D filter: -9.255963e+061 result=40 15:09:09 Get A/D value=-858993460 result=40 15:09:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:09:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:09:09 Aux= 15:09:09 Message to Camera, serial 109908 queued 15:09:46 Received message from Master: op=PointingHead serial=109921 15:09:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:09:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:09:46 Point started: ret=0 15:09:46 point_skyscan result=0 15:09:47 Check angles 15:09:47 SkyScan query 15:09:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 15:09:48 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 15:09:48 Check angles 15:09:48 SkyScan query 15:09:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 15:09:48 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 15:09:49 Check angles 15:09:49 SkyScan query 15:09:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.955<-16397 Statuses=0008 0009 15:09:49 Msec=1500 True Az=112.995 Ze=-65.955 Az status=0008 Ze status=0009 15:09:49 Check angles 15:09:49 SkyScan query 15:09:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.39<-17826 Statuses=0008 0009 15:09:50 Msec=2250 True Az=112.995 Ze=-87.39 Az status=0008 Ze status=0009 15:09:50 Check angles 15:09:50 SkyScan query 15:09:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.345<-19223 Statuses=0008 0009 15:09:51 Msec=3000 True Az=112.995 Ze=-108.345 Az status=0008 Ze status=0009 15:09:51 Check angles 15:09:51 SkyScan query 15:09:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.285<-20619 Statuses=0008 0009 15:09:51 Msec=3750 True Az=112.995 Ze=-129.285 Az status=0008 Ze status=0009 15:09:52 Check angles 15:09:52 SkyScan query 15:09:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.21<-22014 Statuses=0008 0009 15:09:52 Msec=4500 True Az=112.995 Ze=-150.21 Az status=0008 Ze status=0009 15:09:52 Check angles 15:09:52 SkyScan query 15:09:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.03<-23402 Statuses=0008 0009 15:09:53 Msec=5250 True Az=112.995 Ze=-171.03 Az status=0008 Ze status=0009 15:09:53 Check angles 15:09:53 SkyScan query 15:09:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:09:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:09:54 Message to Master queued w/err=0: serial=109921 error=0 15:09:59 Received message from Master: op=Filter serial=109922 15:09:59 Color wheel filter change from 0 to 0 15:09:59 FLIGetFilterPos err=0 currentPosition=0 15:09:59 FLIGetStepsRemaining err=0 RemainingSteps=0 15:09:59 Filter is already there-color wheel unchanged 15:09:59 Received message from Master: op=Shutter serial=109923 15:09:59 Shutter LASER open 15:09:59 Received message from Camera: op=State serial=109925 15:09:59 GetSingleValue result=40 Value=cccccccc 15:09:59 SkyScan query 15:10:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:10:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:00 Parameters OK 15:10:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:00 Set A/D data flow result=40 15:10:00 Set A/D channel type result=40 15:10:00 Set A/D encoding result=40 15:10:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:00 Set channel filter=0.000000e+000 result=40 15:10:00 Config A/D Result=40 15:10:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:00 Get A/D filter: -9.255963e+061 result=40 15:10:00 Get A/D value=-858993460 result=40 15:10:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:00 Parameters OK 15:10:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:00 Set A/D data flow result=40 15:10:00 Set A/D channel type result=40 15:10:00 Set A/D encoding result=40 15:10:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:00 Set channel filter=0.000000e+000 result=40 15:10:00 Config A/D Result=40 15:10:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:00 Get A/D filter: -9.255963e+061 result=40 15:10:00 Get A/D value=-858993460 result=40 15:10:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:10:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:10:00 Aux= 15:10:00 Message to Camera, serial 109925 queued 15:10:08 Received message from Master: op=Shutter serial=109935 15:10:08 Shutter LASER close 15:10:09 Received message from Master: op=PointingHead serial=109939 15:10:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:10:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:10:09 Point started: ret=0 15:10:09 point_skyscan result=0 15:10:10 Check angles 15:10:10 SkyScan query 15:10:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 15:10:10 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 15:10:11 Check angles 15:10:11 SkyScan query 15:10:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.46<-20164 Statuses=0008 0009 15:10:11 Msec=750 True Az=112.995 Ze=-122.46 Az status=0008 Ze status=0009 15:10:11 Check angles 15:10:11 SkyScan query 15:10:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.085<-18739 Statuses=0008 0009 15:10:12 Msec=1500 True Az=112.995 Ze=-101.085 Az status=0008 Ze status=0009 15:10:12 Check angles 15:10:12 SkyScan query 15:10:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.1<-17340 Statuses=0008 0009 15:10:13 Msec=2250 True Az=112.995 Ze=-80.1 Az status=0008 Ze status=0009 15:10:13 Check angles 15:10:13 SkyScan query 15:10:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.16<-15944 Statuses=0008 0009 15:10:13 Msec=3000 True Az=112.995 Ze=-59.16 Az status=0008 Ze status=0009 15:10:14 Check angles 15:10:14 SkyScan query 15:10:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.71<-14514 Statuses=0008 0009 15:10:14 Msec=3750 True Az=112.995 Ze=-37.71 Az status=0008 Ze status=0009 15:10:14 Check angles 15:10:14 SkyScan query 15:10:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.35<-13090 Statuses=0008 0009 15:10:15 Msec=4500 True Az=112.995 Ze=-16.35 Az status=0008 Ze status=0009 15:10:15 Check angles 15:10:15 SkyScan query 15:10:16 SkyScan query done: ret=0 az=112.995<-7533 ze=4.485<-11701 Statuses=0008 0009 15:10:16 Msec=5250 True Az=112.995 Ze=4.485 Az status=0008 Ze status=0009 15:10:16 Check angles 15:10:16 SkyScan query 15:10:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:10:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:10:16 Message to Master queued w/err=0: serial=109939 error=0 15:10:21 Received message from Master: op=Filter serial=109940 15:10:21 Color wheel filter change from 0 to 0 15:10:21 FLIGetFilterPos err=0 currentPosition=0 15:10:21 FLIGetStepsRemaining err=0 RemainingSteps=0 15:10:21 Filter is already there-color wheel unchanged 15:10:22 Received message from Master: op=Shutter serial=109941 15:10:22 Shutter LASER close 15:10:22 Received message from Camera: op=State serial=109943 15:10:22 GetSingleValue result=40 Value=cccccccc 15:10:22 SkyScan query 15:10:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:10:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:22 Parameters OK 15:10:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:22 Set A/D data flow result=40 15:10:22 Set A/D channel type result=40 15:10:22 Set A/D encoding result=40 15:10:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:22 Set channel filter=0.000000e+000 result=40 15:10:22 Config A/D Result=40 15:10:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:22 Get A/D filter: -9.255963e+061 result=40 15:10:22 Get A/D value=-858993460 result=40 15:10:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:22 Parameters OK 15:10:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:22 Set A/D data flow result=40 15:10:22 Set A/D channel type result=40 15:10:22 Set A/D encoding result=40 15:10:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:22 Set channel filter=0.000000e+000 result=40 15:10:22 Config A/D Result=40 15:10:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:22 Get A/D filter: -9.255963e+061 result=40 15:10:22 Get A/D value=-858993460 result=40 15:10:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:10:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:10:22 Aux= 15:10:22 Message to Camera, serial 109943 queued 15:10:59 Received message from Master: op=PointingHead serial=109956 15:10:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:10:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:10:59 Point started: ret=0 15:10:59 point_skyscan result=0 15:11:00 Check angles 15:11:00 SkyScan query 15:11:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:11:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:11:01 Message to Master queued w/err=0: serial=109956 error=0 15:11:06 Received message from Master: op=Filter serial=109957 15:11:06 Color wheel filter change from 0 to 0 15:11:06 FLIGetFilterPos err=0 currentPosition=0 15:11:06 FLIGetStepsRemaining err=0 RemainingSteps=0 15:11:06 Filter is already there-color wheel unchanged 15:11:06 Received message from Master: op=Shutter serial=109958 15:11:06 Shutter LASER close 15:11:06 Received message from Camera: op=State serial=109960 15:11:06 GetSingleValue result=40 Value=cccccccc 15:11:06 SkyScan query 15:11:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:11:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:07 Parameters OK 15:11:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:07 Set A/D data flow result=40 15:11:07 Set A/D channel type result=40 15:11:07 Set A/D encoding result=40 15:11:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:07 Set channel filter=0.000000e+000 result=40 15:11:07 Config A/D Result=40 15:11:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:07 Get A/D filter: -9.255963e+061 result=40 15:11:07 Get A/D value=-858993460 result=40 15:11:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:07 Parameters OK 15:11:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:07 Set A/D data flow result=40 15:11:07 Set A/D channel type result=40 15:11:07 Set A/D encoding result=40 15:11:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:07 Set channel filter=0.000000e+000 result=40 15:11:07 Config A/D Result=40 15:11:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:07 Get A/D filter: -9.255963e+061 result=40 15:11:07 Get A/D value=-858993460 result=40 15:11:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:11:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:11:07 Aux= 15:11:07 Message to Camera, serial 109960 queued 15:11:42 Received message from Master: op=PointingHead serial=109972 15:11:42 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 15:11:42 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 15:11:43 Point started: ret=0 15:11:43 point_skyscan result=0 15:11:44 Check angles 15:11:44 SkyScan query 15:11:44 SkyScan query done: ret=0 az=135.975<-9065 ze=-6.51<-12434 Statuses=0009 0008 15:11:44 Msec=0 True Az=135.975 Ze=-6.51 Az status=0009 Ze status=0008 15:11:44 Check angles 15:11:44 SkyScan query 15:11:45 SkyScan query done: ret=0 az=153.915<-10261 ze=-6.51<-12434 Statuses=0009 0008 15:11:45 Msec=750 True Az=153.915 Ze=-6.51 Az status=0009 Ze status=0008 15:11:45 Check angles 15:11:45 SkyScan query 15:11:46 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 15:11:46 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 15:11:46 Check angles 15:11:46 SkyScan query 15:11:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:11:46 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 15:11:46 Message to Master queued w/err=0: serial=109972 error=0 15:11:51 Received message from Master: op=Filter serial=109973 15:11:51 Color wheel filter change from 0 to 0 15:11:51 FLIGetFilterPos err=0 currentPosition=0 15:11:51 FLIGetStepsRemaining err=0 RemainingSteps=0 15:11:51 Filter is already there-color wheel unchanged 15:11:52 Received message from Master: op=Shutter serial=109974 15:11:52 Shutter LASER close 15:11:52 Received message from Camera: op=State serial=109976 15:11:52 GetSingleValue result=40 Value=cccccccc 15:11:52 SkyScan query 15:11:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:11:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:52 Parameters OK 15:11:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:52 Set A/D data flow result=40 15:11:52 Set A/D channel type result=40 15:11:52 Set A/D encoding result=40 15:11:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:52 Set channel filter=0.000000e+000 result=40 15:11:52 Config A/D Result=40 15:11:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:52 Get A/D filter: -9.255963e+061 result=40 15:11:52 Get A/D value=-858993460 result=40 15:11:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:52 Parameters OK 15:11:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:52 Set A/D data flow result=40 15:11:52 Set A/D channel type result=40 15:11:52 Set A/D encoding result=40 15:11:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:52 Set channel filter=0.000000e+000 result=40 15:11:52 Config A/D Result=40 15:11:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:52 Get A/D filter: -9.255963e+061 result=40 15:11:52 Get A/D value=-858993460 result=40 15:11:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:11:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:11:52 Aux= 15:11:52 Message to Camera, serial 109976 queued 15:12:29 Received message from Master: op=PointingHead serial=109989 15:12:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:12:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:12:29 Point started: ret=0 15:12:29 point_skyscan result=0 15:12:30 Check angles 15:12:30 SkyScan query 15:12:31 SkyScan query done: ret=0 az=152.94<-10196 ze=6.51<-11566 Statuses=0009 0008 15:12:31 Msec=0 True Az=152.94 Ze=6.51 Az status=0009 Ze status=0008 15:12:31 Check angles 15:12:31 SkyScan query 15:12:31 SkyScan query done: ret=0 az=135.015<-9001 ze=6.495<-11567 Statuses=0009 0008 15:12:31 Msec=750 True Az=135.015 Ze=6.495 Az status=0009 Ze status=0008 15:12:32 Check angles 15:12:32 SkyScan query 15:12:32 SkyScan query done: ret=0 az=117.57<-7838 ze=6.495<-11567 Statuses=0009 0008 15:12:32 Msec=1500 True Az=117.57 Ze=6.495 Az status=0009 Ze status=0008 15:12:32 Check angles 15:12:32 SkyScan query 15:12:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:12:33 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:12:33 Message to Master queued w/err=0: serial=109989 error=0 15:12:38 Received message from Master: op=Filter serial=109990 15:12:38 Color wheel filter change from 0 to 0 15:12:38 FLIGetFilterPos err=0 currentPosition=0 15:12:38 FLIGetStepsRemaining err=0 RemainingSteps=0 15:12:38 Filter is already there-color wheel unchanged 15:12:38 Received message from Master: op=Shutter serial=109991 15:12:38 Shutter LASER close 15:12:38 Received message from Camera: op=State serial=109993 15:12:38 GetSingleValue result=40 Value=cccccccc 15:12:38 SkyScan query 15:12:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:12:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:39 Parameters OK 15:12:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:39 Set A/D data flow result=40 15:12:39 Set A/D channel type result=40 15:12:39 Set A/D encoding result=40 15:12:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:39 Set channel filter=0.000000e+000 result=40 15:12:39 Config A/D Result=40 15:12:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:39 Get A/D filter: -9.255963e+061 result=40 15:12:39 Get A/D value=-858993460 result=40 15:12:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:39 Parameters OK 15:12:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:39 Set A/D data flow result=40 15:12:39 Set A/D channel type result=40 15:12:39 Set A/D encoding result=40 15:12:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:39 Set channel filter=0.000000e+000 result=40 15:12:39 Config A/D Result=40 15:12:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:39 Get A/D filter: -9.255963e+061 result=40 15:12:39 Get A/D value=-858993460 result=40 15:12:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:12:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:12:39 Aux= 15:12:39 Message to Camera, serial 109993 queued 15:13:16 Received message from Master: op=PointingHead serial=110006 15:13:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:13:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:13:16 Point started: ret=0 15:13:16 point_skyscan result=0 15:13:17 Check angles 15:13:17 SkyScan query 15:13:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.745<-13583 Statuses=0008 0009 15:13:17 Msec=0 True Az=112.995 Ze=-23.745 Az status=0008 Ze status=0009 15:13:17 Check angles 15:13:17 SkyScan query 15:13:18 SkyScan query done: ret=0 az=113.01<-7534 ze=-45.135<-15009 Statuses=0008 0009 15:13:18 Msec=750 True Az=113.01 Ze=-45.135 Az status=0008 Ze status=0009 15:13:18 Check angles 15:13:18 SkyScan query 15:13:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.135<-16409 Statuses=0008 0009 15:13:19 Msec=1500 True Az=112.995 Ze=-66.135 Az status=0008 Ze status=0009 15:13:19 Check angles 15:13:19 SkyScan query 15:13:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.12<-17808 Statuses=0008 0009 15:13:20 Msec=2250 True Az=112.995 Ze=-87.12 Az status=0008 Ze status=0009 15:13:20 Check angles 15:13:20 SkyScan query 15:13:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.465<-19231 Statuses=0008 0009 15:13:20 Msec=3000 True Az=112.995 Ze=-108.465 Az status=0008 Ze status=0009 15:13:20 Check angles 15:13:20 SkyScan query 15:13:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.42<-20628 Statuses=0008 0009 15:13:21 Msec=3750 True Az=112.995 Ze=-129.42 Az status=0008 Ze status=0009 15:13:21 Check angles 15:13:21 SkyScan query 15:13:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.345<-22023 Statuses=0008 0009 15:13:22 Msec=4500 True Az=112.995 Ze=-150.345 Az status=0008 Ze status=0009 15:13:22 Check angles 15:13:22 SkyScan query 15:13:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 15:13:23 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 15:13:23 Check angles 15:13:23 SkyScan query 15:13:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:13:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:13:23 Message to Master queued w/err=0: serial=110006 error=0 15:13:28 Received message from Master: op=Filter serial=110007 15:13:28 Color wheel filter change from 0 to 0 15:13:28 FLIGetFilterPos err=0 currentPosition=0 15:13:28 FLIGetStepsRemaining err=0 RemainingSteps=0 15:13:28 Filter is already there-color wheel unchanged 15:13:28 Received message from Master: op=Shutter serial=110008 15:13:28 Shutter LASER open 15:13:29 Received message from Camera: op=State serial=110010 15:13:29 GetSingleValue result=40 Value=cccccccc 15:13:29 SkyScan query 15:13:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:13:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:29 Parameters OK 15:13:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:29 Set A/D data flow result=40 15:13:29 Set A/D channel type result=40 15:13:29 Set A/D encoding result=40 15:13:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:29 Set channel filter=0.000000e+000 result=40 15:13:29 Config A/D Result=40 15:13:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:29 Get A/D filter: -9.255963e+061 result=40 15:13:29 Get A/D value=-858993460 result=40 15:13:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:29 Parameters OK 15:13:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:29 Set A/D data flow result=40 15:13:29 Set A/D channel type result=40 15:13:29 Set A/D encoding result=40 15:13:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:29 Set channel filter=0.000000e+000 result=40 15:13:29 Config A/D Result=40 15:13:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:29 Get A/D filter: -9.255963e+061 result=40 15:13:29 Get A/D value=-858993460 result=40 15:13:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:13:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:13:29 Aux= 15:13:29 Message to Camera, serial 110010 queued 15:13:38 Received message from Master: op=Shutter serial=110020 15:13:38 Shutter LASER close 15:13:38 Received message from Master: op=PointingHead serial=110024 15:13:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:13:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:13:38 Point started: ret=0 15:13:38 point_skyscan result=0 15:13:39 Check angles 15:13:39 SkyScan query 15:13:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.725<-21515 Statuses=0008 0009 15:13:40 Msec=0 True Az=112.995 Ze=-142.725 Az status=0008 Ze status=0009 15:13:40 Check angles 15:13:40 SkyScan query 15:13:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.29<-20086 Statuses=0008 0009 15:13:41 Msec=750 True Az=112.995 Ze=-121.29 Az status=0008 Ze status=0009 15:13:41 Check angles 15:13:41 SkyScan query 15:13:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.29<-18686 Statuses=0008 0009 15:13:41 Msec=1500 True Az=112.995 Ze=-100.29 Az status=0008 Ze status=0009 15:13:41 Check angles 15:13:41 SkyScan query 15:13:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.335<-17289 Statuses=0008 0009 15:13:42 Msec=2250 True Az=112.995 Ze=-79.335 Az status=0008 Ze status=0009 15:13:42 Check angles 15:13:42 SkyScan query 15:13:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.395<-15893 Statuses=0008 0009 15:13:43 Msec=3000 True Az=112.995 Ze=-58.395 Az status=0008 Ze status=0009 15:13:43 Check angles 15:13:43 SkyScan query 15:13:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.08<-14472 Statuses=0008 0009 15:13:44 Msec=3750 True Az=112.995 Ze=-37.08 Az status=0008 Ze status=0009 15:13:44 Check angles 15:13:44 SkyScan query 15:13:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.095<-13073 Statuses=0008 0009 15:13:44 Msec=4500 True Az=112.995 Ze=-16.095 Az status=0008 Ze status=0009 15:13:44 Check angles 15:13:44 SkyScan query 15:13:45 SkyScan query done: ret=0 az=112.995<-7533 ze=4.665<-11689 Statuses=0008 0009 15:13:45 Msec=5250 True Az=112.995 Ze=4.665 Az status=0008 Ze status=0009 15:13:45 Check angles 15:13:45 SkyScan query 15:13:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:13:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:13:46 Message to Master queued w/err=0: serial=110024 error=0 15:13:51 Received message from Master: op=Filter serial=110025 15:13:51 Color wheel filter change from 0 to 0 15:13:51 FLIGetFilterPos err=0 currentPosition=0 15:13:51 FLIGetStepsRemaining err=0 RemainingSteps=0 15:13:51 Filter is already there-color wheel unchanged 15:13:51 Received message from Master: op=Shutter serial=110026 15:13:51 Shutter LASER close 15:13:51 Received message from Camera: op=State serial=110028 15:13:51 GetSingleValue result=40 Value=cccccccc 15:13:51 SkyScan query 15:13:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:13:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:52 Parameters OK 15:13:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:52 Set A/D data flow result=40 15:13:52 Set A/D channel type result=40 15:13:52 Set A/D encoding result=40 15:13:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:52 Set channel filter=0.000000e+000 result=40 15:13:52 Config A/D Result=40 15:13:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:52 Get A/D filter: -9.255963e+061 result=40 15:13:52 Get A/D value=-858993460 result=40 15:13:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:52 Parameters OK 15:13:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:52 Set A/D data flow result=40 15:13:52 Set A/D channel type result=40 [UTC 2019-3-4 15:13:52] 15:13:52 Set A/D encoding result=40 15:13:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:52 Set channel filter=0.000000e+000 result=40 15:13:52 Config A/D Result=40 15:13:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:52 Get A/D filter: -9.255963e+061 result=40 15:13:52 Get A/D value=-858993460 result=40 15:13:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:13:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:13:52 Aux= 15:13:52 Message to Camera, serial 110028 queued 15:14:29 Received message from Master: op=PointingHead serial=110041 15:14:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:14:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:14:29 Point started: ret=0 15:14:29 point_skyscan result=0 15:14:30 Check angles 15:14:30 SkyScan query 15:14:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:14:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:14:30 Message to Master queued w/err=0: serial=110041 error=0 15:14:35 Received message from Master: op=Filter serial=110042 15:14:35 Color wheel filter change from 0 to 0 15:14:35 FLIGetFilterPos err=0 currentPosition=0 15:14:35 FLIGetStepsRemaining err=0 RemainingSteps=0 15:14:35 Filter is already there-color wheel unchanged 15:14:35 Received message from Master: op=Shutter serial=110043 15:14:35 Shutter LASER close 15:14:35 Received message from Camera: op=State serial=110045 15:14:35 GetSingleValue result=40 Value=cccccccc 15:14:35 SkyScan query 15:14:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:14:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:36 Parameters OK 15:14:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:36 Set A/D data flow result=40 15:14:36 Set A/D channel type result=40 15:14:36 Set A/D encoding result=40 15:14:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:36 Set channel filter=0.000000e+000 result=40 15:14:36 Config A/D Result=40 15:14:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:36 Get A/D filter: -9.255963e+061 result=40 15:14:36 Get A/D value=-858993460 result=40 15:14:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:36 Parameters OK 15:14:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:36 Set A/D data flow result=40 15:14:36 Set A/D channel type result=40 15:14:36 Set A/D encoding result=40 15:14:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:36 Set channel filter=0.000000e+000 result=40 15:14:36 Config A/D Result=40 15:14:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:36 Get A/D filter: -9.255963e+061 result=40 15:14:36 Get A/D value=-858993460 result=40 15:14:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:14:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:14:36 Aux= 15:14:36 Message to Camera, serial 110045 queued 15:15:12 Received message from Master: op=PointingHead serial=110057 15:15:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:15:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:15:12 Point started: ret=0 15:15:12 point_skyscan result=0 15:15:13 Check angles 15:15:13 SkyScan query 15:15:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:15:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:15:14 Message to Master queued w/err=0: serial=110057 error=0 15:15:19 Received message from Master: op=Filter serial=110058 15:15:19 Color wheel filter change from 0 to 0 15:15:19 FLIGetFilterPos err=0 currentPosition=0 15:15:19 FLIGetStepsRemaining err=0 RemainingSteps=0 15:15:19 Filter is already there-color wheel unchanged 15:15:19 Received message from Master: op=Shutter serial=110059 15:15:19 Shutter LASER close 15:15:19 Received message from Camera: op=State serial=110061 15:15:19 GetSingleValue result=40 Value=cccccccc 15:15:19 SkyScan query 15:15:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:15:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:19 Parameters OK 15:15:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:19 Set A/D data flow result=40 15:15:19 Set A/D channel type result=40 15:15:19 Set A/D encoding result=40 15:15:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:19 Set channel filter=0.000000e+000 result=40 15:15:19 Config A/D Result=40 15:15:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:19 Get A/D filter: -9.255963e+061 result=40 15:15:19 Get A/D value=-858993460 result=40 15:15:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:19 Parameters OK 15:15:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:19 Set A/D data flow result=40 15:15:19 Set A/D channel type result=40 15:15:19 Set A/D encoding result=40 15:15:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:19 Set channel filter=0.000000e+000 result=40 15:15:19 Config A/D Result=40 15:15:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:19 Get A/D filter: -9.255963e+061 result=40 15:15:19 Get A/D value=-858993460 result=40 15:15:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:15:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:15:19 Aux= 15:15:19 Message to Camera, serial 110061 queued 15:15:56 Received message from Master: op=PointingHead serial=110074 15:15:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:15:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:15:57 Point started: ret=0 15:15:57 point_skyscan result=0 15:15:57 Check angles 15:15:57 SkyScan query 15:15:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:15:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:15:58 Message to Master queued w/err=0: serial=110074 error=0 15:16:03 Received message from Master: op=Filter serial=110075 15:16:03 Color wheel filter change from 0 to 0 15:16:03 FLIGetFilterPos err=0 currentPosition=0 15:16:03 FLIGetStepsRemaining err=0 RemainingSteps=0 15:16:03 Filter is already there-color wheel unchanged 15:16:03 Received message from Master: op=Shutter serial=110076 15:16:03 Shutter LASER close 15:16:03 Received message from Camera: op=State serial=110078 15:16:03 GetSingleValue result=40 Value=cccccccc 15:16:03 SkyScan query 15:16:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:16:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:04 Parameters OK 15:16:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:04 Set A/D data flow result=40 15:16:04 Set A/D channel type result=40 15:16:04 Set A/D encoding result=40 15:16:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:04 Set channel filter=0.000000e+000 result=40 15:16:04 Config A/D Result=40 15:16:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:04 Get A/D filter: -9.255963e+061 result=40 15:16:04 Get A/D value=-858993460 result=40 15:16:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:04 Parameters OK 15:16:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:04 Set A/D data flow result=40 15:16:04 Set A/D channel type result=40 15:16:04 Set A/D encoding result=40 15:16:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:04 Set channel filter=0.000000e+000 result=40 15:16:04 Config A/D Result=40 15:16:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:04 Get A/D filter: -9.255963e+061 result=40 15:16:04 Get A/D value=-858993460 result=40 15:16:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:04 Aux= 15:16:04 Message to Camera, serial 110078 queued 15:16:40 Received message from Master: op=PointingHead serial=110091 15:16:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:16:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:16:41 Point started: ret=0 15:16:41 point_skyscan result=0 15:16:42 Check angles 15:16:42 SkyScan query 15:16:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 15:16:42 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 15:16:42 Check angles 15:16:42 SkyScan query 15:16:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.655<-14977 Statuses=0008 0009 15:16:43 Msec=750 True Az=112.995 Ze=-44.655 Az status=0008 Ze status=0009 15:16:43 Check angles 15:16:43 SkyScan query 15:16:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.06<-16404 Statuses=0008 0009 15:16:44 Msec=1500 True Az=112.995 Ze=-66.06 Az status=0008 Ze status=0009 15:16:44 Check angles 15:16:44 SkyScan query 15:16:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.03<-17802 Statuses=0008 0009 15:16:44 Msec=2250 True Az=112.995 Ze=-87.03 Az status=0008 Ze status=0009 15:16:45 Check angles 15:16:45 SkyScan query 15:16:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-108<-19200 Statuses=0008 0009 15:16:45 Msec=3000 True Az=112.995 Ze=-108 Az status=0008 Ze status=0009 15:16:45 Check angles 15:16:45 SkyScan query 15:16:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.925<-20595 Statuses=0008 0009 15:16:46 Msec=3750 True Az=112.995 Ze=-128.925 Az status=0008 Ze status=0009 15:16:46 Check angles 15:16:46 SkyScan query 15:16:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.895<-21993 Statuses=0008 0009 15:16:47 Msec=4500 True Az=112.995 Ze=-149.895 Az status=0008 Ze status=0009 15:16:47 Check angles 15:16:47 SkyScan query 15:16:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.79<-23386 Statuses=0008 0009 15:16:47 Msec=5250 True Az=112.995 Ze=-170.79 Az status=0008 Ze status=0009 15:16:48 Check angles 15:16:48 SkyScan query 15:16:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:16:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:16:48 Message to Master queued w/err=0: serial=110091 error=0 15:16:53 Received message from Master: op=Filter serial=110092 15:16:53 Color wheel filter change from 0 to 0 15:16:53 FLIGetFilterPos err=0 currentPosition=0 15:16:53 FLIGetStepsRemaining err=0 RemainingSteps=0 15:16:53 Filter is already there-color wheel unchanged 15:16:53 Received message from Master: op=Shutter serial=110093 15:16:53 Shutter LASER open 15:16:54 Received message from Camera: op=State serial=110095 15:16:54 GetSingleValue result=40 Value=cccccccc 15:16:54 SkyScan query 15:16:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:16:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:54 Parameters OK 15:16:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:54 Set A/D data flow result=40 15:16:54 Set A/D channel type result=40 15:16:54 Set A/D encoding result=40 15:16:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:54 Set channel filter=0.000000e+000 result=40 15:16:54 Config A/D Result=40 15:16:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:54 Get A/D filter: -9.255963e+061 result=40 15:16:54 Get A/D value=-858993460 result=40 15:16:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:54 Parameters OK 15:16:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:54 Set A/D data flow result=40 15:16:54 Set A/D channel type result=40 15:16:54 Set A/D encoding result=40 15:16:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:54 Set channel filter=0.000000e+000 result=40 15:16:54 Config A/D Result=40 15:16:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:54 Get A/D filter: -9.255963e+061 result=40 15:16:54 Get A/D value=-858993460 result=40 15:16:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:54 Aux= 15:16:54 Message to Camera, serial 110095 queued 15:17:03 Received message from Master: op=Shutter serial=110105 15:17:03 Shutter LASER close 15:17:03 Received message from Master: op=PointingHead serial=110109 15:17:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:17:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:17:03 Point started: ret=0 15:17:03 point_skyscan result=0 15:17:04 Check angles 15:17:04 SkyScan query 15:17:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 15:17:05 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 15:17:05 Check angles 15:17:05 SkyScan query 15:17:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.62<-20108 Statuses=0008 0009 15:17:06 Msec=750 True Az=112.995 Ze=-121.62 Az status=0008 Ze status=0009 15:17:06 Check angles 15:17:06 SkyScan query 15:17:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.665<-18711 Statuses=0008 0009 15:17:06 Msec=1500 True Az=112.995 Ze=-100.665 Az status=0008 Ze status=0009 15:17:06 Check angles 15:17:06 SkyScan query 15:17:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.695<-17313 Statuses=0008 0009 15:17:07 Msec=2250 True Az=112.995 Ze=-79.695 Az status=0008 Ze status=0009 15:17:07 Check angles 15:17:07 SkyScan query 15:17:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.29<-15886 Statuses=0008 0009 15:17:08 Msec=3000 True Az=112.995 Ze=-58.29 Az status=0008 Ze status=0009 15:17:08 Check angles 15:17:08 SkyScan query 15:17:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.395<-14493 Statuses=0008 0009 15:17:09 Msec=3750 True Az=112.995 Ze=-37.395 Az status=0008 Ze status=0009 15:17:09 Check angles 15:17:09 SkyScan query 15:17:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.41<-13094 Statuses=0008 0009 15:17:09 Msec=4500 True Az=112.995 Ze=-16.41 Az status=0008 Ze status=0009 15:17:09 Check angles 15:17:09 SkyScan query 15:17:10 SkyScan query done: ret=0 az=113.01<-7534 ze=4.41<-11706 Statuses=0008 0009 15:17:10 Msec=5250 True Az=113.01 Ze=4.41 Az status=0008 Ze status=0009 15:17:10 Check angles 15:17:10 SkyScan query 15:17:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:17:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:17:11 Message to Master queued w/err=0: serial=110109 error=0 15:17:16 Received message from Master: op=Filter serial=110110 15:17:16 Color wheel filter change from 0 to 0 15:17:16 FLIGetFilterPos err=0 currentPosition=0 15:17:16 FLIGetStepsRemaining err=0 RemainingSteps=0 15:17:16 Filter is already there-color wheel unchanged 15:17:16 Received message from Master: op=Shutter serial=110111 15:17:16 Shutter LASER close 15:17:16 Received message from Camera: op=State serial=110113 15:17:16 GetSingleValue result=40 Value=cccccccc 15:17:16 SkyScan query 15:17:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:17:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:17 Parameters OK 15:17:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:17 Set A/D data flow result=40 15:17:17 Set A/D channel type result=40 15:17:17 Set A/D encoding result=40 15:17:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:17 Set channel filter=0.000000e+000 result=40 15:17:17 Config A/D Result=40 15:17:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:17 Get A/D filter: -9.255963e+061 result=40 15:17:17 Get A/D value=-858993460 result=40 15:17:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:17 Parameters OK 15:17:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:17 Set A/D data flow result=40 15:17:17 Set A/D channel type result=40 15:17:17 Set A/D encoding result=40 15:17:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:17 Set channel filter=0.000000e+000 result=40 15:17:17 Config A/D Result=40 15:17:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:17 Get A/D filter: -9.255963e+061 result=40 15:17:17 Get A/D value=-858993460 result=40 15:17:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:17:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:17:17 Aux= 15:17:17 Message to Camera, serial 110113 queued 15:17:54 Received message from Master: op=PointingHead serial=110126 15:17:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:17:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:17:54 Point started: ret=0 15:17:54 point_skyscan result=0 15:17:55 Check angles 15:17:55 SkyScan query 15:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:17:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:17:55 Message to Master queued w/err=0: serial=110126 error=0 15:18:00 Received message from Master: op=Filter serial=110127 15:18:00 Color wheel filter change from 0 to 0 15:18:00 FLIGetFilterPos err=0 currentPosition=0 15:18:00 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:00 Filter is already there-color wheel unchanged 15:18:00 Received message from Master: op=Shutter serial=110128 15:18:00 Shutter LASER close 15:18:00 Received message from Camera: op=State serial=110130 15:18:00 GetSingleValue result=40 Value=cccccccc 15:18:00 SkyScan query 15:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:18:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:01 Parameters OK 15:18:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:01 Set A/D data flow result=40 15:18:01 Set A/D channel type result=40 15:18:01 Set A/D encoding result=40 15:18:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:01 Set channel filter=0.000000e+000 result=40 15:18:01 Config A/D Result=40 15:18:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:01 Get A/D filter: -9.255963e+061 result=40 15:18:01 Get A/D value=-858993460 result=40 15:18:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:01 Parameters OK 15:18:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:01 Set A/D data flow result=40 15:18:01 Set A/D channel type result=40 15:18:01 Set A/D encoding result=40 15:18:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:01 Set channel filter=0.000000e+000 result=40 15:18:01 Config A/D Result=40 15:18:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:01 Get A/D filter: -9.255963e+061 result=40 15:18:01 Get A/D value=-858993460 result=40 15:18:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:18:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:18:01 Aux= 15:18:01 Message to Camera, serial 110130 queued 15:18:38 Received message from Master: op=PointingHead serial=110143 15:18:38 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 15:18:38 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 15:18:38 Point started: ret=0 15:18:38 point_skyscan result=0 15:18:39 Check angles 15:18:39 SkyScan query 15:18:40 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.51<-12434 Statuses=0009 0008 15:18:40 Msec=0 True Az=135.915 Ze=-6.51 Az status=0009 Ze status=0008 15:18:40 Check angles 15:18:40 SkyScan query 15:18:40 SkyScan query done: ret=0 az=153.465<-10231 ze=-6.495<-12433 Statuses=0009 0008 15:18:40 Msec=750 True Az=153.465 Ze=-6.495 Az status=0009 Ze status=0008 15:18:40 Check angles 15:18:40 SkyScan query 15:18:41 SkyScan query done: ret=0 az=170.955<-11397 ze=-6.495<-12433 Statuses=0009 0008 15:18:41 Msec=1500 True Az=170.955 Ze=-6.495 Az status=0009 Ze status=0008 15:18:41 Check angles 15:18:41 SkyScan query 15:18:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:18:42 Msec=2250 True Az=175.995 Ze=-6.495 Az status=0008 Ze status=0008 15:18:42 Message to Master queued w/err=0: serial=110143 error=0 15:18:47 Received message from Master: op=Filter serial=110144 15:18:47 Color wheel filter change from 0 to 0 15:18:47 FLIGetFilterPos err=0 currentPosition=0 15:18:47 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:47 Filter is already there-color wheel unchanged 15:18:47 Received message from Master: op=Shutter serial=110145 15:18:47 Shutter LASER close 15:18:47 Received message from Camera: op=State serial=110147 15:18:47 GetSingleValue result=40 Value=cccccccc 15:18:47 SkyScan query 15:18:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 15:18:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:48 Parameters OK 15:18:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:48 Set A/D data flow result=40 15:18:48 Set A/D channel type result=40 15:18:48 Set A/D encoding result=40 15:18:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:48 Set channel filter=0.000000e+000 result=40 15:18:48 Config A/D Result=40 15:18:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:48 Get A/D filter: -9.255963e+061 result=40 15:18:48 Get A/D value=-858993460 result=40 15:18:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:48 Parameters OK 15:18:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:48 Set A/D data flow result=40 15:18:48 Set A/D channel type result=40 15:18:48 Set A/D encoding result=40 15:18:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:48 Set channel filter=0.000000e+000 result=40 15:18:48 Config A/D Result=40 15:18:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:48 Get A/D filter: -9.255963e+061 result=40 15:18:48 Get A/D value=-858993460 result=40 15:18:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:18:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:18:48 Aux= 15:18:48 Message to Camera, serial 110147 queued 15:19:24 Received message from Master: op=PointingHead serial=110160 15:19:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:19:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:19:25 Point started: ret=0 15:19:25 point_skyscan result=0 15:19:26 Check angles 15:19:26 SkyScan query 15:19:26 SkyScan query done: ret=0 az=152.85<-10190 ze=6.51<-11566 Statuses=0009 0008 15:19:26 Msec=0 True Az=152.85 Ze=6.51 Az status=0009 Ze status=0008 15:19:26 Check angles 15:19:26 SkyScan query 15:19:27 SkyScan query done: ret=0 az=134.985<-8999 ze=6.495<-11567 Statuses=0009 0008 15:19:27 Msec=750 True Az=134.985 Ze=6.495 Az status=0009 Ze status=0008 15:19:27 Check angles 15:19:27 SkyScan query 15:19:28 SkyScan query done: ret=0 az=117.54<-7836 ze=6.495<-11567 Statuses=0009 0008 15:19:28 Msec=1500 True Az=117.54 Ze=6.495 Az status=0009 Ze status=0008 15:19:28 Check angles 15:19:28 SkyScan query 15:19:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:19:28 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:19:28 Message to Master queued w/err=0: serial=110160 error=0 15:19:33 Received message from Master: op=Filter serial=110161 15:19:33 Color wheel filter change from 0 to 0 15:19:33 FLIGetFilterPos err=0 currentPosition=0 15:19:33 FLIGetStepsRemaining err=0 RemainingSteps=0 15:19:33 Filter is already there-color wheel unchanged 15:19:34 Received message from Master: op=Shutter serial=110162 15:19:34 Shutter LASER close 15:19:34 Received message from Camera: op=State serial=110164 15:19:34 GetSingleValue result=40 Value=cccccccc 15:19:34 SkyScan query 15:19:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:19:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:34 Parameters OK 15:19:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:34 Set A/D data flow result=40 15:19:34 Set A/D channel type result=40 15:19:34 Set A/D encoding result=40 15:19:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:34 Set channel filter=0.000000e+000 result=40 15:19:34 Config A/D Result=40 15:19:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:34 Get A/D filter: -9.255963e+061 result=40 15:19:34 Get A/D value=-858993460 result=40 15:19:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:34 Parameters OK 15:19:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:34 Set A/D data flow result=40 15:19:34 Set A/D channel type result=40 15:19:34 Set A/D encoding result=40 15:19:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:34 Set channel filter=0.000000e+000 result=40 15:19:34 Config A/D Result=40 15:19:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:34 Get A/D filter: -9.255963e+061 result=40 15:19:34 Get A/D value=-858993460 result=40 15:19:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:19:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:19:34 Aux= 15:19:34 Message to Camera, serial 110164 queued 15:20:11 Received message from Master: op=PointingHead serial=110177 15:20:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:20:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:20:11 Point started: ret=0 15:20:11 point_skyscan result=0 15:20:12 Check angles 15:20:12 SkyScan query 15:20:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.55<-13570 Statuses=0008 0009 15:20:13 Msec=0 True Az=112.995 Ze=-23.55 Az status=0008 Ze status=0009 15:20:13 Check angles 15:20:13 SkyScan query 15:20:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 15:20:14 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 15:20:14 Check angles 15:20:14 SkyScan query 15:20:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.895<-16393 Statuses=0008 0009 15:20:14 Msec=1500 True Az=112.995 Ze=-65.895 Az status=0008 Ze status=0009 15:20:14 Check angles 15:20:14 SkyScan query 15:20:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.865<-17791 Statuses=0008 0009 15:20:15 Msec=2250 True Az=112.995 Ze=-86.865 Az status=0008 Ze status=0009 15:20:15 Check angles 15:20:15 SkyScan query 15:20:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.85<-19190 Statuses=0008 0009 15:20:16 Msec=3000 True Az=112.995 Ze=-107.85 Az status=0008 Ze status=0009 15:20:16 Check angles 15:20:16 SkyScan query 15:20:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.79<-20586 Statuses=0008 0009 15:20:17 Msec=3750 True Az=112.995 Ze=-128.79 Az status=0008 Ze status=0009 15:20:17 Check angles 15:20:17 SkyScan query 15:20:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.165<-22011 Statuses=0008 0009 15:20:17 Msec=4500 True Az=112.995 Ze=-150.165 Az status=0008 Ze status=0009 15:20:17 Check angles 15:20:17 SkyScan query 15:20:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.97<-23398 Statuses=0008 0009 15:20:18 Msec=5250 True Az=112.995 Ze=-170.97 Az status=0008 Ze status=0009 15:20:18 Check angles 15:20:18 SkyScan query 15:20:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:20:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:20:19 Message to Master queued w/err=0: serial=110177 error=0 15:20:24 Received message from Master: op=Filter serial=110178 15:20:24 Color wheel filter change from 0 to 0 15:20:24 FLIGetFilterPos err=0 currentPosition=0 15:20:24 FLIGetStepsRemaining err=0 RemainingSteps=0 15:20:24 Filter is already there-color wheel unchanged 15:20:24 Received message from Master: op=Shutter serial=110179 15:20:24 Shutter LASER open 15:20:24 Received message from Camera: op=State serial=110181 15:20:24 GetSingleValue result=40 Value=cccccccc 15:20:24 SkyScan query 15:20:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:20:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:25 Parameters OK 15:20:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:25 Set A/D data flow result=40 15:20:25 Set A/D channel type result=40 15:20:25 Set A/D encoding result=40 15:20:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:25 Set channel filter=0.000000e+000 result=40 15:20:25 Config A/D Result=40 15:20:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:25 Get A/D filter: -9.255963e+061 result=40 15:20:25 Get A/D value=-858993460 result=40 15:20:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:25 Parameters OK 15:20:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:25 Set A/D data flow result=40 15:20:25 Set A/D channel type result=40 15:20:25 Set A/D encoding result=40 15:20:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:25 Set channel filter=0.000000e+000 result=40 15:20:25 Config A/D Result=40 15:20:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:25 Get A/D filter: -9.255963e+061 result=40 15:20:25 Get A/D value=-858993460 result=40 15:20:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:20:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:20:25 Aux= 15:20:25 Message to Camera, serial 110181 queued 15:20:33 Received message from Master: op=Shutter serial=110191 15:20:33 Shutter LASER close 15:20:34 Received message from Master: op=PointingHead serial=110195 15:20:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:20:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:20:34 Point started: ret=0 15:20:34 point_skyscan result=0 15:20:35 Check angles 15:20:35 SkyScan query 15:20:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.725<-21515 Statuses=0008 0009 15:20:35 Msec=0 True Az=112.995 Ze=-142.725 Az status=0008 Ze status=0009 15:20:35 Check angles 15:20:35 SkyScan query 15:20:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.71<-20114 Statuses=0008 0009 15:20:36 Msec=750 True Az=112.995 Ze=-121.71 Az status=0008 Ze status=0009 15:20:36 Check angles 15:20:36 SkyScan query 15:20:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.77<-18718 Statuses=0008 0009 15:20:37 Msec=1500 True Az=112.995 Ze=-100.77 Az status=0008 Ze status=0009 15:20:37 Check angles 15:20:37 SkyScan query 15:20:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.8<-17320 Statuses=0008 0009 15:20:38 Msec=2250 True Az=112.995 Ze=-79.8 Az status=0008 Ze status=0009 15:20:38 Check angles 15:20:38 SkyScan query 15:20:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.86<-15924 Statuses=0008 0009 15:20:38 Msec=3000 True Az=112.995 Ze=-58.86 Az status=0008 Ze status=0009 15:20:38 Check angles 15:20:38 SkyScan query 15:20:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.845<-14523 Statuses=0008 0009 15:20:39 Msec=3750 True Az=112.995 Ze=-37.845 Az status=0008 Ze status=0009 15:20:39 Check angles 15:20:39 SkyScan query 15:20:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.905<-13127 Statuses=0008 0009 15:20:40 Msec=4500 True Az=112.995 Ze=-16.905 Az status=0008 Ze status=0009 15:20:40 Check angles 15:20:40 SkyScan query 15:20:41 SkyScan query done: ret=0 az=112.995<-7533 ze=4.035<-11731 Statuses=0008 0009 15:20:41 Msec=5250 True Az=112.995 Ze=4.035 Az status=0008 Ze status=0009 15:20:41 Check angles 15:20:41 SkyScan query 15:20:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 15:20:41 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 15:20:41 Message to Master queued w/err=0: serial=110195 error=0 15:20:46 Received message from Master: op=Filter serial=110196 15:20:46 Color wheel filter change from 0 to 0 15:20:46 FLIGetFilterPos err=0 currentPosition=0 15:20:46 FLIGetStepsRemaining err=0 RemainingSteps=0 15:20:46 Filter is already there-color wheel unchanged 15:20:46 Received message from Master: op=Shutter serial=110197 15:20:46 Shutter LASER close 15:20:47 Received message from Camera: op=State serial=110199 15:20:47 GetSingleValue result=40 Value=cccccccc 15:20:47 SkyScan query 15:20:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:20:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:47 Parameters OK 15:20:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:47 Set A/D data flow result=40 15:20:47 Set A/D channel type result=40 15:20:47 Set A/D encoding result=40 15:20:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:47 Set channel filter=0.000000e+000 result=40 15:20:47 Config A/D Result=40 15:20:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:47 Get A/D filter: -9.255963e+061 result=40 15:20:47 Get A/D value=-858993460 result=40 15:20:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:47 Parameters OK 15:20:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:47 Set A/D data flow result=40 15:20:47 Set A/D channel type result=40 15:20:47 Set A/D encoding result=40 15:20:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:47 Set channel filter=0.000000e+000 result=40 15:20:47 Config A/D Result=40 15:20:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:47 Get A/D filter: -9.255963e+061 result=40 15:20:47 Get A/D value=-858993460 result=40 15:20:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:20:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:20:47 Aux= 15:20:47 Message to Camera, serial 110199 queued 15:21:24 Received message from Master: op=PointingHead serial=110212 15:21:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 15:21:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 15:21:24 Point started: ret=0 15:21:24 point_skyscan result=0 15:21:25 Check angles 15:21:25 SkyScan query 15:21:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:21:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 15:21:26 Message to Master queued w/err=0: serial=110212 error=0 15:21:31 Received message from Master: op=Filter serial=110213 15:21:31 Color wheel filter change from 0 to 0 15:21:31 FLIGetFilterPos err=0 currentPosition=0 15:21:31 FLIGetStepsRemaining err=0 RemainingSteps=0 15:21:31 Filter is already there-color wheel unchanged 15:21:31 Received message from Master: op=Shutter serial=110214 15:21:31 Shutter LASER close 15:21:31 Received message from Camera: op=State serial=110216 15:21:31 GetSingleValue result=40 Value=cccccccc 15:21:31 SkyScan query 15:21:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 15:21:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:32 Parameters OK 15:21:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:32 Set A/D data flow result=40 15:21:32 Set A/D channel type result=40 15:21:32 Set A/D encoding result=40 15:21:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:32 Set channel filter=0.000000e+000 result=40 15:21:32 Config A/D Result=40 15:21:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:32 Get A/D filter: -9.255963e+061 result=40 15:21:32 Get A/D value=-858993460 result=40 15:21:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:32 Parameters OK 15:21:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:32 Set A/D data flow result=40 15:21:32 Set A/D channel type result=40 15:21:32 Set A/D encoding result=40 15:21:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:32 Set channel filter=0.000000e+000 result=40 15:21:32 Config A/D Result=40 15:21:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:32 Get A/D filter: -9.255963e+061 result=40 15:21:32 Get A/D value=-858993460 result=40 15:21:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:21:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:21:32 Aux= 15:21:32 Message to Camera, serial 110216 queued 15:22:09 Received message from Master: op=PointingHead serial=110229 15:22:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:22:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:22:09 Point started: ret=0 15:22:09 point_skyscan result=0 15:22:10 Check angles 15:22:10 SkyScan query 15:22:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.655<-13577 Statuses=0008 0009 15:22:11 Msec=0 True Az=112.995 Ze=-23.655 Az status=0008 Ze status=0009 15:22:11 Check angles 15:22:11 SkyScan query 15:22:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.61<-14974 Statuses=0008 0009 15:22:11 Msec=750 True Az=112.995 Ze=-44.61 Az status=0008 Ze status=0009 15:22:11 Check angles 15:22:11 SkyScan query 15:22:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 15:22:12 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 15:22:12 Check angles 15:22:12 SkyScan query 15:22:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.52<-17768 Statuses=0008 0009 15:22:13 Msec=2250 True Az=112.995 Ze=-86.52 Az status=0008 Ze status=0009 15:22:13 Check angles 15:22:13 SkyScan query 15:22:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.49<-19166 Statuses=0008 0009 15:22:14 Msec=3000 True Az=112.995 Ze=-107.49 Az status=0008 Ze status=0009 15:22:14 Check angles 15:22:14 SkyScan query 15:22:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.88<-20592 Statuses=0008 0009 15:22:14 Msec=3750 True Az=112.995 Ze=-128.88 Az status=0008 Ze status=0009 15:22:14 Check angles 15:22:14 SkyScan query 15:22:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.865<-21991 Statuses=0008 0009 15:22:15 Msec=4500 True Az=112.995 Ze=-149.865 Az status=0008 Ze status=0009 15:22:15 Check angles 15:22:15 SkyScan query 15:22:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.745<-23383 Statuses=0008 0009 15:22:16 Msec=5250 True Az=112.995 Ze=-170.745 Az status=0008 Ze status=0009 15:22:16 Check angles 15:22:16 SkyScan query 15:22:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:22:17 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:22:17 Message to Master queued w/err=0: serial=110229 error=0 15:22:22 Received message from Master: op=Filter serial=110230 15:22:22 Color wheel filter change from 0 to 2 15:22:22 FLIGetFilterPos err=0 currentPosition=0 15:22:22 FLIGetStepsRemaining err=0 RemainingSteps=0 15:22:25 FLISetFilterPos err=0 rqPosition=2 15:22:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:22:25 Check after 0.00 sec for filter wheel DIn/CWh=0 15:22:25 FLIGetFilterPos err=0 currentPosition=2 15:22:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:22:25 Received message from Master: op=Shutter serial=110231 15:22:25 Shutter LASER close 15:22:25 Received message from Camera: op=State serial=110233 15:22:25 GetSingleValue result=40 Value=cccccccc 15:22:25 SkyScan query 15:22:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:22:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:26 Parameters OK 15:22:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:26 Set A/D data flow result=40 15:22:26 Set A/D channel type result=40 15:22:26 Set A/D encoding result=40 15:22:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:26 Set channel filter=0.000000e+000 result=40 15:22:26 Config A/D Result=40 15:22:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:26 Get A/D filter: -9.255963e+061 result=40 15:22:26 Get A/D value=-858993460 result=40 15:22:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:26 Parameters OK 15:22:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:26 Set A/D data flow result=40 15:22:26 Set A/D channel type result=40 15:22:26 Set A/D encoding result=40 15:22:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:26 Set channel filter=0.000000e+000 result=40 15:22:26 Config A/D Result=40 15:22:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:26 Get A/D filter: -9.255963e+061 result=40 15:22:26 Get A/D value=-858993460 result=40 15:22:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:22:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:22:26 Aux= 15:22:26 Message to Camera, serial 110233 queued 15:22:31 Received message from Master: op=PointingHead serial=110244 15:22:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:22:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:22:32 Point started: ret=0 15:22:32 point_skyscan result=0 15:22:33 Check angles 15:22:33 SkyScan query 15:22:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:22:33 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 15:22:33 Message to Master queued w/err=0: serial=110244 error=0 15:22:38 Received message from Master: op=Filter serial=110245 15:22:38 Color wheel filter change from 2 to 2 15:22:38 FLIGetFilterPos err=0 currentPosition=2 15:22:38 FLIGetStepsRemaining err=0 RemainingSteps=0 15:22:38 Filter is already there-color wheel unchanged 15:22:38 Received message from Master: op=Shutter serial=110246 15:22:38 Shutter LASER close 15:22:39 Received message from Camera: op=State serial=110248 15:22:39 GetSingleValue result=40 Value=cccccccc 15:22:39 SkyScan query 15:22:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:22:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:39 Parameters OK 15:22:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:39 Set A/D data flow result=40 15:22:39 Set A/D channel type result=40 15:22:39 Set A/D encoding result=40 15:22:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:39 Set channel filter=0.000000e+000 result=40 15:22:39 Config A/D Result=40 15:22:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:39 Get A/D filter: -9.255963e+061 result=40 15:22:39 Get A/D value=-858993460 result=40 15:22:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:39 Parameters OK 15:22:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:39 Set A/D data flow result=40 15:22:39 Set A/D channel type result=40 15:22:39 Set A/D encoding result=40 15:22:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:39 Set channel filter=0.000000e+000 result=40 15:22:39 Config A/D Result=40 15:22:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:39 Get A/D filter: -9.255963e+061 result=40 15:22:39 Get A/D value=-858993460 result=40 15:22:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:22:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:22:39 Aux= 15:22:39 Message to Camera, serial 110248 queued 15:23:15 Received message from Master: op=PointingHead serial=110260 15:23:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:23:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:23:15 Point started: ret=0 15:23:15 point_skyscan result=0 15:23:16 Check angles 15:23:16 SkyScan query 15:23:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:23:17 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 15:23:17 Message to Master queued w/err=0: serial=110260 error=0 15:23:22 Received message from Master: op=Filter serial=110261 15:23:22 Color wheel filter change from 2 to 2 15:23:22 FLIGetFilterPos err=0 currentPosition=2 15:23:22 FLIGetStepsRemaining err=0 RemainingSteps=0 15:23:22 Filter is already there-color wheel unchanged 15:23:22 Received message from Master: op=Shutter serial=110262 15:23:22 Shutter LASER close 15:23:22 Received message from Camera: op=State serial=110264 15:23:22 GetSingleValue result=40 Value=cccccccc 15:23:22 SkyScan query 15:23:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:23:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:22 Parameters OK 15:23:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:22 Set A/D data flow result=40 15:23:22 Set A/D channel type result=40 15:23:22 Set A/D encoding result=40 15:23:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:22 Set channel filter=0.000000e+000 result=40 15:23:22 Config A/D Result=40 15:23:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:22 Get A/D filter: -9.255963e+061 result=40 15:23:22 Get A/D value=-858993460 result=40 15:23:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:22 Parameters OK 15:23:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:22 Set A/D data flow result=40 15:23:22 Set A/D channel type result=40 15:23:22 Set A/D encoding result=40 15:23:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:22 Set channel filter=0.000000e+000 result=40 15:23:22 Config A/D Result=40 15:23:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:22 Get A/D filter: -9.255963e+061 result=40 15:23:22 Get A/D value=-858993460 result=40 15:23:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:23:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:23:22 Aux= 15:23:22 Message to Camera, serial 110264 queued 15:23:31 Received message from Master: op=Log close serial=110278 15:23:31 Log file close 15:23:31 * END OF LOG *